aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-02-28ALSA: powermac - Allow input from microphone on TumblerRisto Suominen
Allow input from microphone on remaining PowerBooks and iBooks with Tumbler. Tested only with PowerBook G4 Gigabit Ethernet (PowerBook3,3). [Fixed to use of_machine_is_compatible by tiwai] Signed-off-by: Risto Suominen <Risto.Suominen@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-27sound:core:seq:seq_ports.c Remove one to many n's in a word.Justin P. Mattock
The Patch below removes one to many "n's" in a word.. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-25ALSA: emu10k1 - emu10k1_main.c remove one to many l's in the word.Justin P. Mattock
The patch below removes an extra "l" in the word. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-25ALSA: hda - patch_realtek.c remove one to many l's in the word.Justin P. Mattock
The patch below removes an extra "l" in the word. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-23ALSA: hdspm - Fix lock/sync reporting on MADI and AES32Adrian Knoth
Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-23ALSA: hdspm - prevent reading unitialized stack memoryAdrian Knoth
Original patch by Dan Rosenberg <drosenberg@vsecurity.com> under commit e68d3b316ab7b02a074edc4f770e6a746390cb7d. I'm copying his text here: The SNDRV_HDSPM_IOCTL_GET_CONFIG_INFO ioctl in hdspm.c allow unprivileged users to read uninitialized kernel stack memory, because several fields of the hdspm_config struct declared on the stack are not altered or zeroed before being copied back to the user. This patch takes care of it. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-23ALSA: hdspm - fix sync check on AES32Adrian Knoth
Fredrik Lingvall <fredrik.lingvall@gmail.com> has discovered wrong frequency and sync detection on AES32. According to him, the provided patch fixes these issues. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-23ALSA: hdspm - Remove input selector on MADIfaceAdrian Knoth
In contrast to the RME MADI card, coax/optical selection on the MADIface is done via a physical switch located at the breakout box. Obviously, the driver cannot switch ports in software. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-23ALSA: hdspm - Fix DS/QS output channel mappings on RME MADI/MADIfaceAdrian Knoth
Caused by two typos, no output channel mappings were assigned for MADI/MADIface at double/quad speed. The channel mapping is indeed identical to the single speed mapping, the cards will simply use the first N channels. Signed-off-by: Florian Faber <faber@faberman.de> Signed-off-by: Fredrik Lingvall <fredrik.lingvall@gmail.com> Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-23ALSA: hdspm - Restrict channel count on RME AES/AES32Adrian Knoth
Without calling an appropriate rule, AES/AES32 cards would announce a theoretical channel count of 64 (HDSPM_MAX_CHANNELS), leading to the already known bug: [37422.640481] ------------[ cut here ]------------ [37422.640487] WARNING: at sound/pci/rme9652/hdspm.c:5449 snd_hdspm_ioctl+0x18f/0x202 [snd_hdspm]() [37422.640489] Hardware name: PRIMERGY RX100 S6 [37422.640490] BUG? (info->channel >= hdspm->max_channels_in) [37422.640492] Modules linked in: snd_hdspm snd_seq_midi ipmi_watchdog ipmi_poweroff ipmi_si ipmi_devintf ipmi_msghandler i2c_i801 e1000e snd_rawmidi power_meter [last unloaded: snd_hdspm] [37422.640501] Pid: 22231, comm: jackd Tainted: G D W 2.6.36-gentoo-r5 #5 [37422.640502] Call Trace: [37422.640508] [<ffffffff8103db3a>] warn_slowpath_common+0x80/0x98 [37422.640511] [<ffffffff8103dbe6>] warn_slowpath_fmt+0x41/0x43 [37422.640514] [<ffffffff81034306>] ? get_parent_ip+0x11/0x42 [37422.640518] [<ffffffffa0055763>] snd_hdspm_ioctl+0x18f/0x202 [snd_hdspm] [37422.640522] [<ffffffff813fd626>] snd_pcm_channel_info+0x73/0x7c [37422.640525] [<ffffffff814001e9>] snd_pcm_common_ioctl1+0x326/0xb01 [37422.640527] [<ffffffff81034306>] ? get_parent_ip+0x11/0x42 [37422.640531] [<ffffffff8105be6c>] ? __srcu_read_unlock+0x3b/0x59 [37422.640533] [<ffffffff81400bce>] snd_pcm_capture_ioctl1+0x20a/0x227 [37422.640537] [<ffffffff811e599c>] ? file_has_perm+0x90/0x9e [37422.640540] [<ffffffff81400c15>] snd_pcm_capture_ioctl+0x2a/0x2e [37422.640543] [<ffffffff810f2c69>] do_vfs_ioctl+0x404/0x453 [37422.640546] [<ffffffff810f2d09>] sys_ioctl+0x51/0x74 [37422.640549] [<ffffffff81002aab>] system_call_fastpath+0x16/0x1b [37422.640552] ---[ end trace 0cd919cd68118082 ]--- We already have all the right values in place, we simply have to inform the upper layers about this restriction. Note that snd_hdspm_hw_rule_rate_out_channels and snd_hdspm_hw_rule_rate_in_channels must not be called on AES32, because the channel count is always 16, no matter of the samplerate in use. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-23ALSA: hdspm - Fix buffer handling on RME MADI/MADIface/AES(32)Adrian Knoth
Only RayDAT and AIO provide sane buffer pointers that can be used with HDSPM_BufferPositionMask, on all other cards, this would result in a wrong HW pointer leading to xruns and these messages: [260808.916788] BUG: pcmC0D0p:0, pos = 2976, buffer size = 1024, period size = 512 [260808.961124] BUG: pcmC0D0c:0, pos = 4944, buffer size = 1024, period size = 512 Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-23ALSA: hpdsm - RME AES(32): Fix missing channel mappingsAdrian Knoth
On RME AES and AES(32), none of the required information (max_channels_in, max_channels_out, channel mappings, port names) was set, leading to the BUG below. This patch adds the missing bits, thus fixing the bug. 125.058768] ------------[ cut here ]------------ [ 125.058773] WARNING: at sound/pci/rme9652/hdspm.c:5389 snd_hdspm_ioctl+0x10c/0x1d8 [snd_hdspm]() [ 125.058775] Hardware name: PRIMERGY RX100 S6 [ 125.058777] BUG? (info->channel >= hdspm->max_channels_out) [ 125.058778] Modules linked in: ipmi_watchdog ipmi_poweroff ipmi_si ipmi_devintf ipmi_msghandler snd_hdspm power_meter e1000e snd_rawmidi i2c_i801 [ 125.058787] Pid: 3652, comm: audacity Tainted: G W 2.6.36-gentoo-r5 #5 [ 125.058788] Call Trace: [ 125.058792] [<ffffffff8103db3a>] warn_slowpath_common+0x80/0x98 [ 125.058796] [<ffffffff8103dbe6>] warn_slowpath_fmt+0x41/0x43 [ 125.058800] [<ffffffffa006761a>] snd_hdspm_ioctl+0x10c/0x1d8 [snd_hdspm] [ 125.058803] [<ffffffff813fd626>] snd_pcm_channel_info+0x73/0x7c [ 125.058806] [<ffffffff814001e9>] snd_pcm_common_ioctl1+0x326/0xb01 [ 125.058809] [<ffffffff810c604c>] ? __do_fault+0x361/0x3a6 [ 125.058812] [<ffffffff81400e23>] snd_pcm_playback_ioctl1+0x20a/0x227 [ 125.058815] [<ffffffff811e599c>] ? file_has_perm+0x90/0x9e [ 125.058818] [<ffffffff81400e6a>] snd_pcm_playback_ioctl+0x2a/0x2e [ 125.058821] [<ffffffff810f2c69>] do_vfs_ioctl+0x404/0x453 [ 125.058824] [<ffffffff810f2d09>] sys_ioctl+0x51/0x74 [ 125.058827] [<ffffffff81002aab>] system_call_fastpath+0x16/0x1b [ 125.058830] ---[ end trace 5bddb08e5d4cbeb1 ]--- Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Florian Faber <faber@faberman.de> Signed-off-by: Fredrik Lingvall <fredrik.lingvall@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-20ALSA - au88x0 - add Playback Volume to 10 bands Equalizer ControlsRaymond Yau
Add " Playback Volume" to 10 bands Equalizer Controls of au88x0 so that alsa-lib won't regard them as "Capture Volume". Signed-off-by: Raymond Yau <superquad.vortex2@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-19ALSA: azt3328: hook up new emulated AC97 on AC97 patch sideAndreas Mohr
Make newly created AC97 emulation of azt3328 known to the AC97 layer side. - relocate common functions to the top (due to definition after use) - rename control names - adjust 3D settings to the card's custom layout of this register Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-19ALSA: azt3328: add custom AC97 semi-emulation use standard ALSA AC97 layerAndreas Mohr
Make use of the very flexible ALSA ac97 layer (hooks for custom I/O!) on this weird AC97 copycat hardware, via semi-extended I/O translation/emulation. Some 5kB binary/loaded size saved (well... additional huge AC97 module penalty not factored in, of course ;-P). Given that the driver previously had 20kB that's not bad, but the much more important thing is to have AC97 layer stress-tested with a thoroughly weird AC97 copycat (or, simply put, if it were not for this AC97 test aspect, this effort would merely have been a nut job ;). Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-17ALSA: ac97: replace open-coded, error-prone stuff with AC97 bit definesAndreas Mohr
Use AC97 macros (sometimes already existing, or newly added) instead of error-prone repetition of open-coded values. Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-14ALSA: usb-audio: reconstruct some dispatcher functions to use switch-caseDaniel Mack
The number of cases has increased so use switch-case rather than if-statements. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-14ALSA: usb-audio: add support for Native Instruments MK2 devicesDaniel Mack
The MK2 generation of Native Instruments' sound cards are in fact compliant to the USB audio standard of version 2 and other approved USB standards. However, they come up as vendor-specific device when first connected but can be told to come up with a new set of descriptors upon their next enumeration. The interfaces announced by the new descriptors will be handled by the kernel's class drivers. This is done by issuing a vendor specific device request and sending the device to reset. There are also some vendor-specific USB requests for some mixer elements that can't be exported in a standard compliant way. The driver now supports them with quirks handling mechanisms. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-14ALSA: snd-usb-caiaq: Add support for Traktor Audio 2Daniel Mack
Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-14ALSA: core: sparse cleanupsClemens Ladisch
Change the core code where sparse complains. In most cases, this means just adding annotations to confirm that we indeed want to do the dirty things we're doing. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-10ALSA: asihpi - HPI v4.06Eliot Blennerhassett
Firmware version check depends on hpi version. Update so correct firmware is accepted. Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-10ALSA: asihpi - Fix outstream start trigger for non-mmap adapters.Eliot Blennerhassett
Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-10ALSA: asihpi - Tighten firmware version requirements.Eliot Blennerhassett
Difference in major.minor between driver and firmware is an error now. Release version mismatch give a warning. Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-10ALSA: asihpi - Ensure all adapter data is cleared on device removal.Eliot Blennerhassett
Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-10ALSA: asihpi - Minor define updatesEliot Blennerhassett
HPI version 4.05.32 Tweak HPI error code for backward compatibility. Add BUILD to build-related defines. Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-10ALSA: asihpi - New functions prep for interrupt driven streams.Eliot Blennerhassett
Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-10ALSA: asihpi - Use consistent err return variable, change some bad variable ↵Eliot Blennerhassett
names. Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-10ALSA: asihpi - Remove unused code and data.Eliot Blennerhassett
Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-10ALSA: asihpi - Clarify firmware id selection.Eliot Blennerhassett
Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-10ALSA: asihpi - Allow adapters with duplicate index jumpers to be discovered.Eliot Blennerhassett
Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-10ALSA: asihpi - Add volume mute control.Eliot Blennerhassett
Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-10ALSA: asihpi - Add snd_card_set_dev to init.Eliot Blennerhassett
Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-10ALSA: asihpi - Replace adapter list with single item in subsys response.Eliot Blennerhassett
Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-10ALSA: asihpi - Cosmetic + a minor comments.Eliot Blennerhassett
Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-10ALSA: asihpi - Remove int flag polling code preparing for stream interrupts.Eliot Blennerhassett
Interrupt flag used for message handshake will be required for stream interrupts, so conditionally compiled code without HPI6205_NO_HSR_POLL defined can never be used; removing it. Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-10ALSA: asihpi - Code cleanup.Eliot Blennerhassett
Remove unused function. Simplify hpi_alloc_control_cache. Remove useless assignment to struct subsequently freed. Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-10ALSA: asihpi - Reduce number of error codes returned to upper layers.Eliot Blennerhassett
Create and use HPI_ERROR_DSP_COMMUNICATION _DSP_BOOTLOAD, rather than backend-specific error codes (now returned as data with the error). Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-10ALSA: asihpi - Remove unused subsys pointer from all HPI functions.Eliot Blennerhassett
asihpi.c don't link playback and capture streams, there is too much offset between them. Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-10ALSA: asihpi - Update error codes.Eliot Blennerhassett
Some error codes had duplicate meanings. Just use one. Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-10ALSA: asihpi - Checkpatch line lengths etc.Eliot Blennerhassett
Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-10ALSA: asihpi - Add include guard.Eliot Blennerhassett
Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-10ALSA: asihpi - Add adapter index to cache info for debug.Eliot Blennerhassett
Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-10ALSA: asihpi - Rewrite PCM timer function. Update control names.Eliot Blennerhassett
Reported samples_played from card may be inaccurate, so don't use it. Update control names to be closer to alsa standard practice. Also fixed some accidentally lowercased strings. [Removed adriver.h inclusion for external module builds by tiwai] Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-10ALSA: asihpi - Interrelated HPI tidy up.Eliot Blennerhassett
Remove many unused functions. Update some message and cache structs. Use pci info directly from pci_dev. Allow control cache elements with variable size, and handle large message/response from dsp. hpi6000 and hpi6205: fix error path when adapter bootload fails. hpimsgx.c get rid of code duplicated in hpicmn.c Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-10ALSA: asihpi - HPI 4.05.14Eliot Blennerhassett
All enum values numeric for easier finding, particularly error codes. Remove many unused declarations. Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-10ALSA: asihpi - Simplify debug logging.Eliot Blennerhassett
Log HPI messages and responses in consistent numeric format, which can be post-processed to get strings. Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-10ALSA: asihpi - Poison adapter_index in message. Remove unused function.Eliot Blennerhassett
Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-10ALSA: asihpi - Switch to dev_printk.Eliot Blennerhassett
Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-07ALSA: USB: 6fire: signedness bug in usb6fire_pcm_prepare()Dan Carpenter
rt->rate is an unsigned char so it's never equal to -1. It's not a huge problem because the invalid rate is caught inside the call to usb6fire_pcm_set_rate() which returns -EINVAL. But if we fix the test then it prints out the correct error message so that's good. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-27ALSA: Release v1.0.24Jaroslav Kysela
Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-11-24 18:31:51 +0000