aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-01-19ARM: SAMSUNG: Add platform data registration for OHCIBen Dooks
Add a platform data helper for the OHCI device Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-19ARM: SAMSUNG: Make UART device code commonBen Dooks
Move s3c24xx_uart_devs, s3c24xx_uart_src and the platform devices to a common entry in plat-samsung since they are the same in all the current implementations. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15ARM: S3C2412: Fixup commented out device in SMDK2413Ben Dooks
The SMDK2413 has a commented out device that does not have any setup data for it, so remove it for now. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15ARM: S3C: Rename s3c_device_usb to s3c_device_ohciBen Dooks
Prepare for the forthcoming device changes by renaming s3c_device_usb to s3c_device_ohci as this is what the device represents. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15ARM: S5P6440: Add serial port supportKukjin Kim
This patch adds UART serial port support for S5P6440 CPU. Most of the serial support of Samsung's 6400 CPU is reused for 6440 CPU. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15ARM: S5P6440: Add configuration fileKukjin Kim
This patch adds Samsung's S5P6440 default configuration file. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15ARM: S5P6440: Add Board support fileKukjin Kim
This patch adds Samsung's SMDK6440 board support file. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15ARM: S5P6440: Add new Kconfig and MakefilesKukjin Kim
This patch adds the Kconfig and Makefile for the new S5P6440 machine and platform directories. It also updates arch/arm Kconfig and Makefiles to include the support for the new S5P6440 CPU. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15ARM: S5P6440: Add Timer supportKukjin Kim
This patch adds timer support for S5P6440 CPU. Signed-off-by: Atul Dahiya <atul.dahiya@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15ARM: S5P6440: Add IRQ supportKukjin Kim
This patch adds IRQ support for S5P6440 CPU. Signed-off-by: Adityapratap Sharma <aditya.ps@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15ARM: S5P6440: Add Clock and PLL supportKukjin Kim
This patch adds clock and pll support for S5P6440. This patch are based on Harald Welte's patches and Ben's plat-samsung. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15ARM: S5P6440: Add new CPU initialization supportKukjin Kim
This patch adds Samsung's S5P6440 CPU support. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15ARM: S5PC1XX: Use common UART IRQ handling codeBen Dooks
Use the common UART IRQ handling code for the S5PC100 system. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15ARM: S5PC1XX: Move to using standard timer IRQ handling codeBen Dooks
Move to using the standard VIC/Timer IRQ handling code added previously to avoid duplicating code. Thanks to Marek Szyprowski for pointing out dual Kconfig change. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15ARM: S5PC1XX: Remove definitions deleted by previous clksrc changesBen Dooks
Remove the definitions we've deleted in the previous updates to the clksrc_clk for arch/arm/plat-s5pc1xx/include/plat/regs-clock.h. Added comments about the removal to the clock header since we only need these defines in one place (and they've now been removed there) we get rid of them from the header. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15ARM: SAMSUNG: Add script to change old clksrc_clk to new register defsBen Dooks
This script is used to change the old style clksrc_clk as originally found in plat-s3c64xx to the new style. It is here for reference if needed for future code merges. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15ARM: S5PC1XX: Change clksrc_clks to use array of clocksBen Dooks
Remove the individual 'struct clksrc_clks' and place them into an array so that we can simply use s3c_register_clksrcs to register tham all in one go. Since the spdif clock relies on the audio clock, move the audio clocks into their own arrary. Thanks to Marek Szyprowski for testing and pointing out the four clocks what where missed from the clock list. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15ARM: S5PC1XX: Move clock definitions around ready to turn into clksrc arraysBen Dooks
Move the clock definitions around ready to turn the clocks into an array of clocks and register them in one go. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15ARM: S5PC1XX: Move to using generic clksrc_clk for clock codeBen Dooks
Remove the copy of the old s3c64xx struct clksrc_clk and use the new one in plat-samsung. This eliminates a bug in the set_parent() call where it failed to set the clk->parent after sucesfully updating the clock. The script that was used to automate much of the process will be supplied seperately. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15ARM: SAMSUNG: Add config option for number of additional GPIO pins.Kukjin Kim
This patch adds a configuration option for specifing the number of additional GPIO pins to be used in addition to the GPIO pins supported onchip. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15ARM: Add common entry code for system with two VICsBen Dooks
Add a common entry-macro-vic2.S for systems where there are two VICs so that the machine or platform directories just need to setup the correct information before including <asm/entry-macro-vic2.S> into their own entry-macro.S file. Since this code is from the S3C64XX project, we update the S3C64XX machine entry code to use this new header. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15ARM: SAMSUNG: Move IRQ UART handling for newer devices to plat-samsungBen Dooks
Move the handling for the UART interrupts out of the s3c64xx specific code and into plat-samsung so that it can be used by all implementations that need it. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15ARM: SAMSUNG: Move IRQ VIC timer handling out to common header filesBen Dooks
Move the VIC based timer interrupt handling out of plat-s3c64xx and into plat-samsung to be re-used for other systems. This also reduces the code size as we now have a common init routine and use the irq_desc to store the interrupt number of the timer. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15ARM: SAMSUNG: Move gpio-config.c into plat-samsungBen Dooks
The arch/arm/plat-s3c/gpio-config.c file is common to pretty much all the Samsung SoCs, so move it to arch/arm/plat-samsung Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15ARM: SAMSUNG: Move device definitions in plat-samsungBen Dooks
Move all the platform device definitions from plat-s3c into plat-samsung Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15ARM: SAMSUNG: Move pwm-clock code into plat-samsungBen Dooks
Move the code for the pwm-clock into plat-samsung, as it is common to all Samsung SoCs. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15ARM: SAMSUNG: Make clk_default_setrate and clk_ops_def_setrate visibleKukjin Kim
This patch makes clk_default_setrate and clk_ops_def_setrate available to code outside plat-samsung clock code. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15ARM: SAMSUNG: Do not register set_parent call if no sourceBen Dooks
If there is no source register defined, do not register a clksrc clock with a valid .set_parent in the ops. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15ARM: SAMSUNG: Add call to register array of clocksBen Dooks
Add s3c_register_clocks() to register an array of clocks, printing an error message if there is a problem. Replace all points in the code where this could be used. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15ARM: SAMSUNG: Do not allow get/set/round rate calls with no dividerBen Dooks
If the reg_div field is not set, then do not register clk_ops with the get/set/round rate calls as these will fail to work. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15ARM: SAMSUNG: Move clock.c to arch/arm/plat-samsungBen Dooks
This is the core implementation of the clock code for all Samsung based SoCs, so move it to arch/arm/plat-samsung (the clock.h file has already been moved). Since the file is built for every Samsung SoC, no changes are needed to the Kconfig system. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15ARM: S3C64XX: Avoid announcing clksrc clocks twiceBen Dooks
The new code calls the clock setup code on registration which can be before the clock system has been fully initialised. The following code re-does this setup at the end of the clock registration and thus we get two printings. Update the calls to only print on the last pass or when doing the necessary resume work. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15ARM: S3C64XX: Fixup .reg_src and .reg_div with named initialisersBen Dooks
Change these two fields to have named initialisers as per the review comments from Kyungmin Park. sed used: s@\.reg_src\(.*\)=\(.*\){\(.*\),\(.*\),\(.*\)}@.reg_src\1=\2{ .reg =\3, .shift =\4, .size =\5 }@g s@\.reg_div\(.*\)=\(.*\){\(.*\),\(.*\),\(.*\)}@.reg_div\1=\2{ .reg =\3, .shift =\4, .size =\5 }@g Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15ARM: SAMSUNG: Reduce size of struct clk.Ben Dooks
Reduce the size of struct clk by 12 bytes and make defining clocks with common implementation functions easier by moving the set_rate, get_rate, round_rate and set_parent calls into a new structure called 'struct clk_ops' and using that instead. This change does make a few clocks larger as they need their own clk_ops, but this is outweighed by the number of clocks with either no ops or having a common set of ops. Update all the users of this. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15ARM: S3C64XX: Remove unused clock definitions from clock headerHarald Welte
Clean out the definitions we are no longer using after the new clock code updates. Signed-off-by: Harald Welte <laforge@gnumonks.org> [ben-linux@fluff.org: split from initial patch provided] Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15ARM: S3C64XX: Use new clock-clksrc.c code for clocks.Ben Dooks
Move the s3c6400-clock.c implementation over to use the new common plat-samsung based clock-clksrc.c. Note, this does not delete the clocks definitions that are now unused in the regs-clock.h to reduce the quantity of change in this commit. Based on original patches by Harald Welte. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15ARM: SAMSUNG: Add core clock implementation for clksrc based clocksHarald Welte
Add a core for the clksrc clock implementation, which is found in many of the newer Samsung SoCs into plat-samsung. Signed-off-by: Harald Welte <laforge@gnumonks.org> [ben-linux@fluff.org: split from original patch to make change smaller] [ben-linux@fluff.org: split clk and clksrc changes] [ben-linux@fluff.org: moved to plat-samsung from plat-s3c] [ben-linux@fluff.org: re-wrote headers after splits] [ben-linux@fluff.org: added better documentation to headers] Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15ARM: S3C64XX: Compress s3c6400-clock.c codeBen Dooks
The individually named clocks are all static to the code and thus can be compressed into a single array and then the array can be referenced. This removes the need for a seperate array of pointers to clocks. Fix a minor problem of re-initialising the pointers in s3c6400_set_clksrc() as this is also called by the cpufreq code. Move these initialisations to the code that does the registration. Based on Harald Welte's original clock changes patch. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15ARM: S3C64XX: Cleanup common init code in s3c6400-clock.cBen Dooks
Remove the four fields from clksrc_clk.clk which are always the same and init them when the clock is registered. This helps remove the amount of repeated code. This is a re-work of Harald Welte's clock changes for the latest kernel. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15ARM: SAMSUNG: Move <plat/clock.h> to plat-samsungBen Dooks
Move the <plat/clock.h> header to plat-samsung where it can be used by all the platforms, and readies it for the next round of clock updates where the clock code will be amalgamated. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15ARM: MINI2440: Fixup __initdata usageBen Dooks
Remove some of the __initdata tags which are currently inappropriate for platform_device and some of the platform data. These can be returned once support for copying platform devices and data is added. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15ARM: MINI2440: Fix crash on boot due to improper __initdata qualifierUri Yosef
This patch fix mini2440 crash on boot due to improper __initdata qualifier on mini2440_led1_pdata. Signed-off-by: Uri Yosef <uri.yosef@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15ARM: SMDK6410: Specify no GPIO for B_PWR_5V regulatorMark Brown
Since the fixed voltage regulator grew support for GPIO based enables and GPIO 0 is valid on some systems we need to specify that there is no valid GPIO enable control. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-14ARM: S3C: NAND: Check the existence of nr_map before copyingRamax Lo
Since the structure field nr_map is optional, we need to check whether the chip number map is provided to avoid unexpected NULL pointer exception. Signed-off-by: Ramax Lo <ramaxlo@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-13Merge branch 'drm-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm: change drm set mode messages as DRM_DEBUG drm: fix crtc no modes printf + typo drm/radeon/kms: only evict to GTT if CP is ready drm/radeon/kms: Fix crash getting TV info with no BIOS. drm/radeon/kms/rv100: reject modes > 135 Mhz on DVI (v2) drm/radeon/kms/r6xx+: make irq handler less verbose drm/radeon/kms: fix up LVDS handling on macs (v2)
2010-01-13zlib: Fix build of powerpc boot wrapperBenjamin Herrenschmidt
Commit ac4c2a3bbe5db5fc570b1d0ee1e474db7cb22585 broke the build of all powerpc boot wrappers. It attempts to add an include of autoconf.h but used the wrong path for it. It also adds -D__KERNEL__ to our boot wrapper, both things that we pretty much didn't do on purpose so far. We want our boot wrapper to remain independent enough of the kernel for various reasons, one of them being that you can "wrap" an existing kernel at distro install time which allows to ship one kernel image and a set of boot wrappers for different platforms, the wrappers don't have to be built out of the same kernel build tree. It's also incorrect to do what the patch does in our boot environment since we may not have a proper alignment exception handler which means we may not be able to fixup the few cases where an unaligned access will need SW emulation (depends on the core variant, could be when crossing page or segment boundaries for example). This patch fixes it by putting the old code back in and using the new "fancy" variant only when CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is set, which happens not to be set on powerpc since we don't include autoconf.h. It also reverts the changes to our boot wrapper Makefile. This means that x86 should, afaik, keep the optimisations since its boot wrapper does include autoconf.h and define __KERNEL__ (though I doubt they make that much different outside of slow embedded processors). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: wacom: Add BTN_TOOL_FINGER for pad button reporting HID: add device IDs for new model of Apple Wireless Keyboard HID: fix pad button definition in hid-wacom HID: Support 171 byte variant of Samsung USB IR receiver HID: blacklist ET&T TC5UH touchscreen controller
2010-01-13Merge branch 'for-33' of git://repo.or.cz/linux-kbuildLinus Torvalds
* 'for-33' of git://repo.or.cz/linux-kbuild: Makefile: do not override LC_CTYPE kbuild: really fix bzImage build with non-bash sh
2010-01-13vfs: Fix vmtruncate() regressionOGAWA Hirofumi
If __block_prepare_write() was failed in block_write_begin(), the allocated blocks can be outside of ->i_size. But new truncate_pagecache() in vmtuncate() does nothing if new < old. It means the above usage is not working anymore. So, this patch fixes it by removing "new < old" check. It would need more cleanup/change. But, now -rc and truncate working is in progress, so, this tried to fix it minimum change. Acked-by: Nick Piggin <npiggin@suse.de> Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-13Merge branch 'fasync-helper'Linus Torvalds
* fasync-helper: fasync: split 'fasync_helper()' into separate add/remove functions