aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2006-01-09[CRYPTO] cipher: Set alignmask for multi-byte loadsHerbert Xu
Many cipher implementations use 4-byte/8-byte loads/stores which require alignment on some architectures. This patch explicitly sets the alignment requirements for them. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-01-09[CRYPTO] api: Require block size to be less than PAGE_SIZE/8Herbert Xu
The cipher code path may allocate up to two blocks of data on the stack. Therefore we need to place limits on the maximum block size. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-01-09[CRYPTO] sha1: Fixed off-by-64 bug in sha1_updateHerbert Xu
After a partial update, the done pointer is off to the right by 64 bytes. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-01-09[CRYPTO] aes-i586: Remove unused variable ls_tabDaniel Marjamäki
It is assigned but never read. Signed-off-by: Daniel Marjamäki <daniel.marjamaki@comhem.se> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-01-09[CRYPTO] aes-i586: Nano-optimisation on key length checkDenis Vlasenko
Reduce the number of comparisons by one through the use of jb/je. This patch also corrects the comments regarding the different key lengths. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-01-09[CRYPTO] cipher: Align temporary buffer in cbc_process_decryptHerbert Xu
Since the temporary buffer is used as an argument to cia_decrypt, it must be aligned by cra_alignmask. This bug was found by linux@horizon.com. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-01-09[CRYPTO] sha1: Avoid shifting count left and rightNicolas Pitre
This patch avoids shifting the count left and right needlessly for each call to sha1_update(). It instead can be done only once at the end in sha1_final(). Keeping the previous test example (sha1_update() successively called with len=64), a 1.3% performance increase can be observed on i386, or 0.2% on ARM. The generated code is also smaller on ARM. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-01-09[CRYPTO] sha1: Rename i/j to done/partialNicolas Pitre
This patch gives more descriptive names to the variables i and j. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-01-09[CRYPTO] sha1: Avoid useless memcpy()Nicolas Pitre
The current code unconditionally copy the first block for every call to sha1_update(). This can be avoided if there is no pending partial block. This is always the case on the first call to sha1_update() (if the length is >= 64 of course. Furthermore, temp does need to be called if sha_transform is never invoked. Also consolidate the sha_transform calls into one to reduce code size. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-01-09[CRYPTO] Allow AES C/ASM implementations to coexistHerbert Xu
As the Crypto API now allows multiple implementations to be registered for the same algorithm, we no longer have to play tricks with Kconfig to select the right AES implementation. This patch sets the driver name and priority for all the AES implementations and removes the Kconfig conditions on the C implementation for AES. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-01-09[CRYPTO] Allow multiple implementations of the same algorithmHerbert Xu
This is the first step on the road towards asynchronous support in the Crypto API. It adds support for having multiple crypto_alg objects for the same algorithm registered in the system. For example, each device driver would register a crypto_alg object for each algorithm that it supports. While at the same time the user may load software implementations of those same algorithms. Users of the Crypto API may then select a specific implementation by name, or choose any implementation for a given algorithm with the highest priority. The priority field is a 32-bit signed integer. In future it will be possible to modify it from user-space. This also provides a solution to the problem of selecting amongst various AES implementations, that is, aes vs. aes-i586 vs. aes-padlock. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-01-09[CRYPTO] Use standard byte order macros wherever possibleHerbert Xu
A lot of crypto code needs to read/write a 32-bit/64-bit words in a specific gender. Many of them open code them by reading/writing one byte at a time. This patch converts all the applicable usages over to use the standard byte order macros. This is based on a previous patch by Denis Vlasenko. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-01-09[PADLOCK] Fix sparse warning about 1-bit signed bit-fieldHerbert Xu
Change the bit-field in struct cword to unsigned to shut sparse up. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-01-09Merge master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvbLinus Torvalds
2006-01-09[PATCH] Fix more "if ((err = foo() < 0))" typosAlexey Dobriyan
Another reason to use: ret = foo(); if (ret < 0) goto out; Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-09[PATCH] Fix sg_page_malloc() memsetHugh Dickins
sg_page_malloc should clear the data buffer, not that extent of mem_map. This fixes Jesper's sg_page_free "Bad page states" Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-09V4L/DVB (3336): Bluebird firmware hosting moved to common dvb firmware dir ↵Michael Krufky
on linuxtv.org - Get_dvb_firmware script updated accordingly: - my $url = "http://www.linuxtv.org/~mkrufky/dvb-usb-bluebird-01.fw"; + my $url = "http://www.linuxtv.org/download/dvb/firmware/dvb-usb-blue$ Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3329): cx88_subids whitespace cleanupChris Pascoe
- Clean up a recently introduced spaces vs tabs whitespace problem. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3328): replace omitted 'TODO:'Michael Krufky
- replace omitted 'TODO:' Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3327): Remove DViCO specific firmware hacks from the generic code.Patrick Boettcher
- Move the code that patches bluebird firmware before upload from the generic code into the cxusb driver itself. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3326): Fix stereo and standard reporting of msp3400 (esp. for radio)Hans Verkuil
- Add VIDIOC_LOG_STATUS to the radio device ioctl list. - Reduce the confusion between modes and standards - Fix stereo reporting for radio. - Don't set i2c configuration if the chip doesn't support it. - Fix reporting of current standard for radio. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3325): WSS output interface for av7110Oliver Endriss
- Implemented v4l2 api for sliced vbi data output to pass WSS data from userspace to the av7110 Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3324): msp3400 audio handling bug fixes.Hans Verkuil
- Check capabilities for audio settings (volume, balance, bass, treble, loudness, mute) - added loudness support - added missing VIDEO_AUDIO_BALANCE flags for v4l1 compatibility - do not call msp_any_detect_stereo for non-autoselect chips to retrieve the current stereo setting: that will temporarily mute the sound. It is only needed when the stereo mode might be changed, and for autoselect msp processors that do not periodically need to update their stereo setting. - do not wake up the thread if the standard did not change. Prevents temporary audio drop-out if the standard is set to the same value. - fix confused stereo detect code where V4L2_TUNER_SUB_STEREO and V4L2_TUNER_MODE_STEREO values were used incorrectly. - stereo mode reporting was broken (v4l2 value used to index a string array expecting v4l1 mode values). - do not set dsp register 0x30 in the 3410d thread: that register does not exist for pre-'G' revision msp chips. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3323): Add Kconfig option for wrongly programmed devicesMarc Koschewski
- A new Kconfig option makes the user able to select if the dibusb-mb driver shall claim faulty programmed USB devices which are coming with default Cypress USB IDs. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3322): Whitespace cleanup and unused code removedMarc Koschewski
- Some whitespaces cleaned up - unused code removed Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3321): Indention cleanupsMarc Koschewski
- Indention cleaned for tabsize=8 Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3320): Check if PLL-description is setPatrick Boettcher
- Check if in the dvb-usb-device-structure the dvb_pll_desc is set before use. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3319): Changed indention for define's and their valuesMarc Koschewski
- Indention for values of several request defines were not TabSized=8. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3318): Fixes warning: variable "ret" is used before its value is setd binderman
- Fixes compiling warning on kernel 2.6.15 with the Intel C compiler. - It said drivers/media/dvb/frontends/bcm3510.c(258): warning #592: variable "ret" is used before its value is set Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3317): msp3400: use v4l2_std_id and determine chip capabilities.Hans Verkuil
- Replace old norm by the v4l2_std_id values. - Add code to correctly detect the various capabilities of the various msp chips. It's not yet used, that's going to be the next step. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3315): Use correct AGC settings for DNTV Live! DVB-T ProChris Pascoe
- My original settings for this board were incorrect and resulted in an increased number of signal dropouts. Replace this with the settings from the Windows driver. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3313): codingstyle cleanups & restore some wrongfully deleted ↵Michael Krufky
dvb-usb-ids - codingstyle cleanups & restore some wrongfully deleted dvb-usb-ids Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3312): DViCO USB IR Remote supportChris Pascoe
- Add support for the remote control receiver inside the DViCO FusionHDTV DVB-T Dual Digital, and a keymap for the MCE remote bundled with it. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3311): DViCO FusionHDTV DVB-T Dual Digital PCI supportChris Pascoe
- Support for DVB reception on the PCI half of the DViCO DVB-T Dual Digital. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3310): DViCO Dual Digital DVB-T / USB bluebird updatesChris Pascoe
- Add support for the USB portion of the DViCO Dual Digital board. Patch correct "warm" USB IDs into bluebird firmware before download. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3309): SAA7134: GPIO IRQ improvementsPeter Missel
- Saa7134-core.c saa7134_irq(): Separate GPIO16 and GPIO18 handling. Call IR-remote-GPIO handler only if the GPIO IRQ is "owned" by it. Added infrastructure to branch out to a future I2C-IR IRQ handler. saa7134-core.c saa7134_hwinit2(): Enable only the one GPIO pin and edge to trigger an IRQ that is wired as keyup/keydown mask. IRQ will only be generated for an actual key-down event. saa7134-input.c flyvideo_codes[]: Replace numpad keys with normal ones. Put meaning to mystery keys. Change some key definitions to have their functions match their labels better. Fix typos. saa7134-input.c flydvb_codes[]: Added new table for the larger remote that comes with the LifeView FlyDVB series. saa7134-input.c build_key(): In IRQ mode, signal key-down and then key-up straight in one go. Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-mergeLinus Torvalds
2006-01-09[PATCH] Update cyblafb driverKnut Petersen
This is a major update to the cyblafb framebuffer driver. Most of the stuff has been tested in the mm tree. Main advantages: ============ - vxres > xres support - ywrap and xpan support - much faster for almost all modes (e.g. 1280x1024-16bpp draws more than 41 full screens of text instead of about 25 full screens of text per second on authors Epia 5000) - module init/exit code fixed - bugs triggered by console rotation fixed - lots of minor improvements - startup modes suitable for high performance scrolling in all directions This diff also contains a lot of white space fixes. No side effects are possible, only one single graphics core is affected. Signed-off-by: Knut Petersen <Knut_Petersen@t-online.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-09V4L/DVB (3307): Some cleanups at I2C modulesMauro Carvalho Chehab
- i2c names shorten - removed obsoleted flags on newer modules - small cleanups Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev
2006-01-09Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2006-01-09[PATCH] netlink oops fix due to incorrect error codeKirill Korotaev
Fixed oops after failed netlink socket creation. Wrong parathenses in if() statement caused err to be 1, instead of negative value. Trivial fix, not trivial to find though. Signed-Off-By: Dmitry Mishin <dim@sw.ru> Signed-Off-By: Kirill Korotaev <dev@openvz.org> Signed-Off-By: Linus Torvalds <torvalds@osdl.org>
2006-01-09[PATCH] rcu: uninline __rcu_pending()Oleg Nesterov
__rcu_pending() is rather fat and called twice from rcu_pending(). rcu_pending() has multiple callers, and not that small too. This patch uninlines both of them. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Acked-by: Paul E. McKenney <paulmck@us.ibm.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-09V4L/DVB (3305): Replaces old debug msgs to newer onesMauro Carvalho Chehab
- Replaces old debug msgs from bt832, tda743d and tda9875 to newer ones as defined under v4l2-common.h. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3303): Both AverTV Studio 303 cards #6 and #36 use the same IR ↵George Gazurkoff
programming. - Both AverTV Studio 303 cards, #6 and #36, use the same remote control programming. Signed-off-by: George Gazurkoff <gazurkoff@gmail.com> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3296): Fixes a bug at compat_ioctl32 kernel moduleGuy Martin
- There is a bug in the ioctl translations from 32bit userspace to 64bit kernelspace in do_set_window(). - The video window (vw) should be passed to native_ioctl() instead of the video clip. Signed-off-by: Guy Martin <gmsoft@tuxicoman.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3295): Add analog support for LifeView FlyDVB Trio.Peter Missel
- Add support for LifeView FlyDVB Trio. - all analog inputs are supported and working, including FM radio - TO DO: dvb & remote control Signed-off-by: Peter Missel <peter.missel@onlinehome.de> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3294): Add Kworld/Vstream Xpert DVB-T card with cx22702 tuner.Manenti Marco
- Add Kworld/Vstream Xpert DVB-T card with cx22702 tuner. Signed-off-by: Manenti Marco <marco_manenti@colman.it> Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3293): Added digital support for cx88 (cx88-alsa)Mauro Carvalho Chehab
- This module is co-authored by Ricardo Cerqueira <v4l@cerqueira.org>. - Added digital audio support for cx88-based boards that have function 01 enabled. These boards can be identified by having PCI id 1471:8801 or 1471:8811. - Increased DMA buffer from 512 to 4096 seems to fix audio distortion. - Existing audio DMA uses conflict with cx88-alsa. Should be disabled when cx88-alsa module is compiled. Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3292): Fix signed/unsigned bug in brightness handling of cx25840Hans Verkuil
- Fix signed/unsigned bug in brightness handling (set to 0 and 128 was returned). Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-13 00:41:23 +0000