aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-08-27wan: Missing capability checks in sbni_ioctl()Eugene Teo
There are missing capability checks in the following code: 1300 static int 1301 sbni_ioctl( struct net_device *dev, struct ifreq *ifr, int cmd) 1302 { [...] 1319 case SIOCDEVRESINSTATS : 1320 if( current->euid != 0 ) /* root only */ 1321 return -EPERM; [...] 1336 case SIOCDEVSHWSTATE : 1337 if( current->euid != 0 ) /* root only */ 1338 return -EPERM; [...] 1357 case SIOCDEVENSLAVE : 1358 if( current->euid != 0 ) /* root only */ 1359 return -EPERM; [...] 1372 case SIOCDEVEMANSIPATE : 1373 if( current->euid != 0 ) /* root only */ 1374 return -EPERM; Here's my proposed fix: Missing capability checks. Signed-off-by: Eugene Teo <eugeneteo@kernel.sg> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-27Merge branch 'no-iwlwifi' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2008-08-27Merge branch 'davem-fixes' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2008-08-27e100, fix iomap readJiri Slaby
There were 2 omitted readb's used on an iomap space. eliminate them by using ioread8 instead. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Bruce Allan <bruce.w.allan@intel.com> Cc: PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com> Cc: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-27qeth: preallocated header account offsetFrank Blaschka
When a preallocated header qdio buffer is filled we have to account the offset for the data length. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-27qeth: l2 write unicast list to hardwareFrank Blaschka
In case the netdev unicast list contains additional entries we have to register/deregister them. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-27qeth: use -EOPNOTSUPP instead of -ENOTSUPP.Ursula Braun
return value -ENOTSUPP is not valid in userspace context, use -EOPNOTSUPP instead. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-27ibm_newemac: Don't call dev_mc_add() before device is registeredBenjamin Herrenschmidt
We must not call dev_mc_add() from within our HW configure which happens before we initialize and register the netdev. Do it in open() instead. Thanks to Sebastian Siewior for tracking it down. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-27net: don't grab a mutex within a timer context in gianfarSebastian Siewior
I got the following backtrace while network was unavailble: |NETDEV WATCHDOG: eth0: transmit timed out |BUG: sleeping function called from invalid context at /home/bigeasy/git/linux-2.6-powerpc/kernel/mutex.c:87 |in_atomic():1, irqs_disabled():0 |Call Trace: |[c0383d90] [c0006dd8] show_stack+0x48/0x184 (unreliable) |[c0383db0] [c001e938] __might_sleep+0xe0/0xf4 |[c0383dc0] [c025a43c] mutex_lock+0x24/0x3c |[c0383de0] [c019005c] phy_stop+0x20/0x70 |[c0383df0] [c018d4ec] stop_gfar+0x28/0xf4 |[c0383e10] [c018e8c4] gfar_timeout+0x30/0x60 |[c0383e20] [c01fe7c0] dev_watchdog+0xa8/0x144 |[c0383e30] [c002f93c] run_timer_softirq+0x148/0x1c8 |[c0383e60] [c002b084] __do_softirq+0x5c/0xc4 |[c0383e80] [c00046fc] do_softirq+0x3c/0x54 |[c0383e90] [c002ac60] irq_exit+0x3c/0x5c |[c0383ea0] [c000b378] timer_interrupt+0xe0/0xf8 |[c0383ec0] [c000e5ac] ret_from_except+0x0/0x18 |[c0383f80] [c000804c] cpu_idle+0xcc/0xdc |[c0383fa0] [c025c07c] etext+0x7c/0x90 |[c0383fc0] [c0338960] start_kernel+0x294/0x2a8 |[c0383ff0] [c00003dc] skpinv+0x304/0x340 |------------[ cut here ]------------ The phylock was once a spinlock but got changed into a mutex via commit 35b5f6b1a aka [PHYLIB: Locking fixes for PHY I/O potentially sleeping] Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-27forcedeth: fix checksum flagAyaz Abdulla
Fix the checksum feature advertised in device flags. The hardware support TCP/UDP over IPv4 and TCP/UDP over IPv6 (without IPv6 extension headers). However, the kernel feature flags do not distinguish IPv6 with/without extension headers. Therefore, the driver needs to use NETIF_F_IP_CSUM instead of NETIF_F_HW_CSUM since the latter includes all IPv6 packets. A future patch can be created to check for extension headers and perform software checksum calculation. Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Manfred Spraul <manfred@colorfullife.com Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-27net/usb/mcs7830: add set_mac_addressOliver Martin
Implement set_mac_address for mcs7830. This enables me to use it with my cable modem. Signed-off-by: Oliver Martin <oliver.martin@student.tuwien.ac.at> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-27net/usb/mcs7830: new device IDsArnd Bergmann
This adds USB device IDs for MosChip 7730 and Sitecom LN030 to the mcs7830 driver. The IDs have been reported to work without further modifications. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: David Brownell <david-b@pacbell.net> Cc: Viktor Horvath <ViktorHorvath@gmx.net> Cc: Robbert Wethmar <robbert@wethmar.nl> Cc: Bart van der Klip <bklip@xs4all.nl> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-27[netdrvr] smc91x: fix resource removal (null ptr deref)Jeff Garzik
Properly handle resource cleanup on unplug/exit. Spotted by Jonathan Cameron Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-27ibmveth: fix bad UDP checksumsSantiago Leon
This patch fixes a ibmveth bug where bad UDP checksums are being transmitted when checksum offloading is enabled. The hypervisor does checksum offloading only on TCP packets, so ibmveth calls skb_checksum_help() for any other protocol. The bug happens because the packet is being modified after the DMA map, so we would need a memory barrier before making the hypervisor call. Reordering the code so that the DMA map happens after skb_checksum_help() has the additional advantage of fixing a DMA map leak if skb_checksum_help() where to fail. Signed-off-by: Santiago Leon <santil@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-27[netdrvr] hso: dev_kfree_skb crash fixDenis Joseph Barrow
Fixes dev_kfree_skb happening too many times when hso_start_net_device is called from hso_resume. Signed-off-by: Denis Joseph Barrow <D.Barow@option.com> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-27[netdrvr] hso: icon 322 detection fixDenis Joseph Barrow
Fixes Icon-322 detection. Signed-off-by: Denis Joseph Barrow <D.Barow@option.com> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-27atl1: disable TSO by defaultJay Cliburn
The atl1 driver is causing stalled connections and file corruption whenever TSO is enabled. Two examples are here: http://lkml.org/lkml/2008/7/15/325 http://lkml.org/lkml/2008/8/18/543 Disable TSO by default until we can determine the source of the problem. Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-27atl1e: multistatement if missing bracesIlpo Järvinen
Doesn't cause problems (yet) because err gets zeroed earlier. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-27igb: remove 82576 quad adapterAlexander Duyck
Disable support for device 8086:10E8. Currently the result of loading the driver with the device present causes system instability. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-27drivers/net/skfp/ess.c: fix compile warningsTakashi Iwai
CC [M] drivers/net/skfp/ess.o drivers/net/skfp/ess.c: In function 'ess_send_response': drivers/net/skfp/ess.c:513: warning: cast from pointer to integer of different size drivers/net/skfp/ess.c: In function 'ess_send_alc_req': drivers/net/skfp/ess.c:609: warning: cast from pointer to integer of different size drivers/net/skfp/ess.c:639: warning: cast from pointer to integer of different size Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-27ipv4: mode 0555 in ipv4_skeletonHugh Dickins
vpnc on today's kernel says Cannot open "/proc/sys/net/ipv4/route/flush": d--------- 0 root root 0 2008-08-26 11:32 /proc/sys/net/ipv4/route d--------- 0 root root 0 2008-08-26 19:16 /proc/sys/net/ipv4/neigh Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-27tcp: fix tcp header size miscalculation when window scale is unusedPhilip Love
The size of the TCP header is miscalculated when the window scale ends up being 0. Additionally, this can be induced by sending a SYN to a passive open port with a window scale option with value 0. Signed-off-by: Philip Love <love_phil@emc.com> Signed-off-by: Adam Langley <agl@imperialviolet.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-27pkt_sched: Fix sch_tree_lock()Jarek Poplawski
Use new qdisc_root_sleeping_lock() instead of qdisc_root_lock() as sch_tree_lock() because this lock could be used while dev is deactivated, but we never need to use this with noop_qdisc as a root. Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-27pkt_sched: Fix gen_estimator locksJarek Poplawski
While passing a qdisc root lock to gen_new_estimator() and gen_replace_estimator() dev could be deactivated or even before grafting proper root qdisc as qdisc_sleeping (e.g. qdisc_create), so using qdisc_root_lock() is not enough. This patch adds qdisc_root_sleeping_lock() for this, plus additional checks, where necessary. Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-27pkt_sched: Use rcu_assign_pointer() to change dev_queue->qdiscJarek Poplawski
These pointers are RCU protected, so proper primitives should be used. Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-27LCS recovery dumps when cable reconnectKlaus-D. Wacker
LCS recovery dumps in irq routine when CCW address in Subchannel Status Word (SCSW) is zero. This occurs when recovery is driven after cable reconnect. Signed-off-by: Klaus-D. Wacker <kdwacker@de.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-27ctcm: netdev->priv vs. netdev->ml_privPeter Tiedemann
Use netdev->ml_priv instead of netdev->priv Signed-off-by: Peter Tiedemann <ptiedem@de.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-27claw: netdev->priv vs. netdev->ml_privPeter Tiedemann
Use netdev->ml_priv instead of netdev->priv Signed-off-by: Peter Tiedemann <ptiedem@de.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-27claw: fix memory leak in claw_probe.Martin Schwidefsky
probe_error() frees memory only, if cgdev->dev.driver_data refers to the claw_privbk structure. Move forward its setting in claw_probe() to ensure proper freeing of claw_privbk allocations. Cc: Daniel <danielm77@spray.se> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-27[netdrvr] fix build issue: undefined reference to `NS8390p_init'Alan Cox
Signed-off-by: Alan 'pass the paper bags' Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-27fs_enet: Fix SCC Ethernet on CPM2, and crash in fs_enet_rx_napi()Heiko Schocher
Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Vitaly Bordug <vitb@kernel.crashing.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-27igb: fix setting the number of tx queuesAlexander Duyck
The real_num_tx_queues was not being set when in MSI-X only mode. This patch corrects that path so all interrupt types are correctly configured. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-27igb: ethtool -d reads EICR which is incorrect as it is read on clearAlexander Duyck
Ethtool -d is reading the EICR and ICR registers which is currently clearing these registers and masking off interrupts. To prevent this we read the EICS and ICS equivilents as they can be read without clearing or masking. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-27igb: force all queues to interrupt once every 2 secondsAlexander Duyck
Set the EICS bit for each of the RX queues at least once every 2 seconds to prevent the rx queues from stalling. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-27r8169: balance pci_map / pci_unmap pairFrancois Romieu
The leak hurts with swiotlb and jumbo frames. Fix http://bugzilla.kernel.org/show_bug.cgi?id=9468. Heavily hinted by Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Tested-by: Alistair John Strachan <alistair@devzero.co.uk> Tested-by: Timothy J Fontaine <tjfontaine@atxconsulting.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-27pkt_sched: Fix dev_graft_qdisc() lockingJarek Poplawski
During dev_graft_qdisc() dev is deactivated, so qdisc_root_lock() returns wrong lock of noop_qdisc instead of qdisc_sleeping. Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-27myri10ge: update version string to 1.4.3-1.358Brice Goglin
Update myri10ge version string to 1.4.3-1.358. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-27ixgbe: fix vlan filteringAlexander Duyck
VLAN filtering is broken, due to reading the incorrect register for the VLAN filtering settings. Fixed by reading/writing the correct register. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-27Blackfin EMAC Driver: the BF526 also supports the MAC,Mike Frysinger
so update things accordingly Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-27Merge branch 'for-2.6.27' of git://git.marvell.com/mv643xx_eth into ↵Jeff Garzik
upstream-fixes
2008-08-26mac80211: quiet chatty IBSS merge messageJohn W. Linville
It seems obvious that this #ifndef should be the opposite polarity... Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-26mac80211: don't send empty extended rates IEJan-Espen Pettersen
The association request includes a list of supported data rates. 802.11b: 4 supported rates. 802.11g: 12 (8 + 4) supported rates. 802.11a: 8 supported rates. The rates tag of the assoc request has room for only 8 rates. In case of 802.11g an extended rate tag is appended. However in net/wireless/mlme.c an extended (empty) rate tag is also appended if the number of rates is exact 8. This empty (length=0) extended rates tag causes some APs to deny association with code 18 (unsupported rates). These APs include my ZyXEL G-570U, and according to Tomas Winkler som Cisco APs. 'If count == 8' has been used to check for the need for an extended rates tag. But count would also be equal to 8 if the for loop exited because of no more supported rates. Therefore a check for count being less than rates_len would seem more correct. Thanks to: * Dan Williams for newbie guidance * Tomas Winkler for confirming the problem Signed-off-by: Jan-Espen Pettersen <sigsegv@radiotube.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-26mac80211: Fix debugfs file add/del for netdevJouni Malinen
Previous version was using incorrect union structures for non-AP interfaces when adding and removing max_ratectrl_rateidx and force_unicast_rateidx entries. Depending on the vif type, this ended up in corrupting debugfs entries since the dentries inside different union structures ended up going being on top of eachother.. As the end result, debugfs files were being left behind with references to freed data (instant kernel oops on access) and directories were not removed properly when unloading mac80211 drivers. This patch fixes those issues by using only a single union structure based on the vif type. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-26net/mac80211/mesh.c: correct the argument to __mesh_table_freeJulia Lawall
In the function mesh_table_grow, it is the new table not the argument table that should be freed if the function fails (cf commit bd9b448f4c0a514559bdae4ca18ca3e8cd999c6d) The semantic match that detects this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; expression E,f; position p1,p2,p3; identifier l; statement S; @@ x = mesh_table_alloc@p1(...) ... if (x == NULL) S ... when != E = x when != mesh_table_free(x) goto@p2 l; ... when != E = x when != f(...,x,...) when any ( return \(0\|x\); | return@p3 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; p3 << r.p3; @@ print "%s: call on line %s not freed or saved before return on line %s via line %s" % (p1[0].file,p1[0].line,p3[0].line,p2[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-26mac80211: Use IWEVASSOCREQIE instead of IWEVCUSTOMJouni Malinen
The previous code was using IWEVCUSTOM to report IEs from AssocReq and AssocResp frames into user space. This can easily hit the 256 byte limit (IW_CUSTOM_MAX) with APs that include number of vendor IEs in AssocResp. This results in the event message not being sent and dmesg showing "wlan0 (WE) : Wireless Event too big (366)" type of errors. Convert mac80211 to use IWEVASSOCREQIE/IWEVASSOCRESPIE to avoid the issue of being unable to send association IEs as wireless events. These newer event types use binary encoding and larger maximum size (IW_GENERIC_IE_MAX = 1024), so the likelyhood of not being able to send the IEs is much smaller than with IWEVCUSTOM. As an extra benefit, the code is also quite a bit simpler since there is no need to allocate an extra buffer for hex encoding. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-26net: rfkill: add missing line breakFelipe Balbi
Trivial patch adding a missing line break on rfkill_claim_show(). Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.co> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-26Ath5k: fix bintval setupJiri Slaby
bintval is set to the initial value at .config_interface which is too late, since it overwrites previously set value from .config. Move the initialization to the .add_interface. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Nick Kossifidis <mickflemm@gmail.com> Cc: Luis R. Rodriguez <mcgrof@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-26Ath5k: lock beaconsJiri Slaby
Beacons setup and config was racy with beacon send. Ensure that ISR and reset functions see consistent state of bbuf. Use also dev_kfree_skb_any in ath5k_txbuf_free since we call it from atomic now. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Nick Kossifidis <mickflemm@gmail.com> Cc: Luis R. Rodriguez <mcgrof@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-26atmel: try open system authentication tooDan Williams
When the AP rejects a Shared Key authentication request, try Open System auth too. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-26atmel: return ENOENT on request_firmware failureDan Williams
Return errors from request_firmware() (like other drivers that do firmware load on device open) and make up plausible codes for other error conditions. Gives userspace tools like NetworkManager a clue that firmware may be missing when the result of setting IFF_UP is ENOENT. Signed-off-by: Dan Williams <dcbw@redhat.com> v2: fix reversed check of atmel_wakeup_firmware() in probe_atmel_card() Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-19 10:02:04 +0000