aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-05-15caif: remove unesesarry exportssjur.brandeland@stericsson.com
Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-15caif: Bugfix debugfs directory name must be unique.sjur.brandeland@stericsson.com
Race condition caused debugfs_create_dir() to fail due to duplicate name. Use atomic counter to create unique directory name. net_ratelimit() is introduced to limit debug printouts. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-15caif: Handle dev_queue_xmit errors.sjur.brandeland@stericsson.com
Do proper handling of dev_queue_xmit errors in order to avoid double free of skb and leaks in error conditions. In cfctrl pending requests are removed when CAIF Link layer goes down. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-15caif: prepare support for namespacessjur.brandeland@stericsson.com
Use struct net to reference CAIF configuration object instead of static variables. Refactor functions caif_connect_client, caif_disconnect_client and squach files cfcnfg.c and caif_config_utils. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-15caif: Protected in-flight packets using dev or sock refcont.sjur.brandeland@stericsson.com
CAIF Socket Layer and ip-interface registers reference counters in CAIF service layer. The functions sock_hold, sock_put and dev_hold, dev_put are used by CAIF Stack to protect from freeing memory while packets are in-flight. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-15caif: Move refcount from service layer to sock and dev.sjur.brandeland@stericsson.com
Instead of having reference counts in caif service layers, we hook into existing refcount handling in socket layer and netdevice. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-15caif: Add ref-count to framing layersjur.brandeland@stericsson.com
Introduce Per-cpu reference for lower part of CAIF Stack. Before freeing payload is disabled, synchronize_rcu() is called, and then ref-count verified to be zero. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-15caif: Use RCU and lists in cfcnfg.c for managing caif link layerssjur.brandeland@stericsson.com
RCU lists are used for handling the link layers instead of array. When generating CAIF phy-id, ifindex is used as base. Legal range is 1-6. Introduced set_phy_state() for managing CAIF Link layer state. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-15caif: Use RCU instead of spin-lock in caif_dev.csjur.brandeland@stericsson.com
RCU read_lock and refcount is used to protect in-flight packets. Use RCU and counters to manage freeing lower part of the CAIF stack if CAIF-link layer is removed. Old solution based on delaying removal of device is removed. When CAIF link layer goes down the use of CAIF link layer is disabled (by calling caif_set_phy_state()), but removal and freeing of the lower part of the CAIF stack is done when Link layer is unregistered. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-15caif: Use rcu_read_lock in CAIF mux layer.sjur.brandeland@stericsson.com
Replace spin_lock with rcu_read_lock when accessing lists to layers and cache. While packets are in flight rcu_read_lock should not be held, instead ref-counters are used in combination with RCU. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-15net: ping: small changesEric Dumazet
ping_table is not __read_mostly, since it contains one rwlock, and is static to ping.c ping_port_rover & ping_v4_lookup are static Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Vasiliy Kulikov <segoon@openwall.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-15Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/jkirsher/net-next-2.6
2011-05-14Merge branch 'batman-adv/next' of git://git.open-mesh.org/ecsv/linux-mergeDavid S. Miller
2011-05-14ixgbe: Add support for new 82599 adapterDon Skidmore
This patch adds support for a new adapter in the 82599 family. Included in that support is a new media_type ixgbe_media_type_fiber_lco. Signed-of-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-14ixgbe: fix sparse warningEmil Tantilov
error: bad constant expression Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-14ixgbe: cleanup some minor issues in ixgbe_down()Alexander Duyck
This patch cleans up two minor issues in ixgbe_down. Specifically it addresses the fact that the VFs should not be pinged until after interrupts are disabled otherwise they might still get a response. It also drops the use of the txdctl temporary variable since the only bit we should be writing to the TXDCTL registers during a shutdown is the flush bit. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-14ixgbe: Merge over-temp task into service taskAlexander Duyck
This change merges the over-temp task into the service task. As a result all tasklets are finally combined into once single tasklet for easier management. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-14ixgbe: Merge ATR reinit into the service taskAlexander Duyck
This change merges the ATR table reinitialization into the service task. This is yet another opportunity to avoid any race conditions as we don't want to be attempting to reinitialize the table during a possible reset. In addition this change adds a counter for table reinitialization so that it can be tracked as part of the regular statistics. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-14ixgbe: merge reset task into service taskAlexander Duyck
This change is meant to further help to reduce possible configuration collisions between the various tasklets. This change combines the device reset with the service task. As a result it is now not possible to be updating the link on the device while also resetting the part. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-14ixgbe: Merge watchdog functionality into service taskAlexander Duyck
This patch is meant to merge the functionality of the ixgbe watchdog task into the service task. By doing this all link state functionality will be controlled by a single task. As a result the reliability of the interface will be improved as the likelihood of any race conditions is further reduced. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-14ixgbe: Combine SFP and multi-speed fiber task into single service taskAlexander Duyck
This change is meant to address several race conditions with multi-speed fiber SFP+ modules in 82599 adapters. Specifically issues have been seen in which both the SFP configuration and the multi-speed fiber configuration are running simultaneously which will result in the device getting into an erroneous link down state. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-14ixgbe: move flags and state into the same cachelineAlexander Duyck
This change moves flags and state into the same cacheline. The reason for this change is because both are frequently read around the same time and infrequently written. By combining them into the same cacheline this should help to reduce memory utilization. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-14ixgbe: force unlock on timeoutEmil Tantilov
The semaphore can be in locked state upon driver load, particularly on 82598 if a machine is rebooted due to panic and the semaphore was acquired just prior to the panic. This patch unlocks the semaphore if it times out. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-14ixgbe: Add macvlan support for VFGreg Rose
Add infrastructure in the PF driver to support macvlan in the VF driver. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-14ixgbevf: Add macvlan support in the set rx mode opGreg Rose
Implement setup of unicast address list in the VF driver's set_rx_mode netdev op. Unicast addresses are sent to the PF via a mailbox message and the PF will check if it has room in the RAR table and if so set the filter for the VF. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-14e1000e: minor comment cleanupsBruce Allan
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-15batman-adv: reset broadcast flood protection on errorMarek Lindner
The broadcast flood protection should be reset to its original value if the primary interface could not be retrieved. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-05-15batman-adv: Add missing hardif_free_ref in forw_packet_freeSven Eckelmann
add_bcast_packet_to_list increases the refcount for if_incoming but the reference count is never decreased. The reference count must be increased for all kinds of forwarded packets which have the primary interface stored and forw_packet_free must decrease them. Also purge_outstanding_packets has to invoke forw_packet_free when a work item was really cancelled. This regression was introduced in 32ae9b221e788413ce68feaae2ca39e406211a0a. Reported-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-05-13ipv4: Remove rt->rt_dst reference from ip_forward_options().David S. Miller
At this point iph->daddr equals what rt->rt_dst would hold. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13ipv4: Remove route key identity dependencies in ip_rt_get_source().David S. Miller
Pass in the sk_buff so that we can fetch the necessary keys from the packet header when working with input routes. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13ipv4: Always call ip_options_build() after rest of IP header is filled in.David S. Miller
This will allow ip_options_build() to reliably look at the values of iph->{daddr,saddr} Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13ipv4: Kill spurious write to iph->daddr in ip_forward_options().David S. Miller
This code block executes when opt->srr_is_hit is set. It will be set only by ip_options_rcv_srr(). ip_options_rcv_srr() walks until it hits a matching nexthop in the SRR option addresses, and when it matches one 1) looks up the route for that nexthop and 2) on route lookup success it writes that nexthop value into iph->daddr. ip_forward_options() runs later, and again walks the SRR option addresses looking for the option matching the destination of the route stored in skb_rtable(). This route will be the same exact one looked up for the nexthop by ip_options_rcv_srr(). Therefore "rt->rt_dst == iph->daddr" must be true. All it really needs to do is record the route's source address in the matching SRR option adddress. It need not write iph->daddr again, since that has already been done by ip_options_rcv_srr() as detailed above. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13olympic: convert to seq_fileAlexey Dobriyan
->read_proc interface is going away, switch to seq_file. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13net:set valid name before calling ndo_init()Peter Pan(潘卫平)
In commit 1c5cae815d19 (net: call dev_alloc_name from register_netdevice), a bug of bonding was involved, see example 1 and 2. In register_netdevice(), the name of net_device is not valid until dev_get_valid_name() is called. But dev->netdev_ops->ndo_init(that is bond_init) is called before dev_get_valid_name(), and it uses the invalid name of net_device. I think register_netdevice() should make sure that the name of net_device is valid before calling ndo_init(). example 1: modprobe bonding ls /proc/net/bonding/bond%d ps -eLf root 3398 2 3398 0 1 21:34 ? 00:00:00 [bond%d] example 2: modprobe bonding max_bonds=3 [ 170.100292] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) [ 170.101090] bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details. [ 170.102469] ------------[ cut here ]------------ [ 170.103150] WARNING: at /home/pwp/net-next-2.6/fs/proc/generic.c:586 proc_register+0x126/0x157() [ 170.104075] Hardware name: VirtualBox [ 170.105065] proc_dir_entry 'bonding/bond%d' already registered [ 170.105613] Modules linked in: bonding(+) sunrpc ipv6 uinput microcode ppdev parport_pc parport joydev e1000 pcspkr i2c_piix4 i2c_core [last unloaded: bonding] [ 170.108397] Pid: 3457, comm: modprobe Not tainted 2.6.39-rc2+ #14 [ 170.108935] Call Trace: [ 170.109382] [<c0438f3b>] warn_slowpath_common+0x6a/0x7f [ 170.109911] [<c051a42a>] ? proc_register+0x126/0x157 [ 170.110329] [<c0438fc3>] warn_slowpath_fmt+0x2b/0x2f [ 170.110846] [<c051a42a>] proc_register+0x126/0x157 [ 170.111870] [<c051a4dd>] proc_create_data+0x82/0x98 [ 170.112335] [<f94e6af6>] bond_create_proc_entry+0x3f/0x73 [bonding] [ 170.112905] [<f94dd806>] bond_init+0x77/0xa5 [bonding] [ 170.113319] [<c0721ac6>] register_netdevice+0x8c/0x1d3 [ 170.113848] [<f94e0e30>] bond_create+0x6c/0x90 [bonding] [ 170.114322] [<f94f4763>] bonding_init+0x763/0x7b1 [bonding] [ 170.114879] [<c0401240>] do_one_initcall+0x76/0x122 [ 170.115317] [<f94f4000>] ? 0xf94f3fff [ 170.115799] [<c0463f1e>] sys_init_module+0x1286/0x140d [ 170.116879] [<c07c6d9f>] sysenter_do_call+0x12/0x28 [ 170.117404] ---[ end trace 64e4fac3ae5fff1a ]--- [ 170.117924] bond%d: Warning: failed to register to debugfs [ 170.128728] ------------[ cut here ]------------ [ 170.129360] WARNING: at /home/pwp/net-next-2.6/fs/proc/generic.c:586 proc_register+0x126/0x157() [ 170.130323] Hardware name: VirtualBox [ 170.130797] proc_dir_entry 'bonding/bond%d' already registered [ 170.131315] Modules linked in: bonding(+) sunrpc ipv6 uinput microcode ppdev parport_pc parport joydev e1000 pcspkr i2c_piix4 i2c_core [last unloaded: bonding] [ 170.133731] Pid: 3457, comm: modprobe Tainted: G W 2.6.39-rc2+ #14 [ 170.134308] Call Trace: [ 170.134743] [<c0438f3b>] warn_slowpath_common+0x6a/0x7f [ 170.135305] [<c051a42a>] ? proc_register+0x126/0x157 [ 170.135820] [<c0438fc3>] warn_slowpath_fmt+0x2b/0x2f [ 170.137168] [<c051a42a>] proc_register+0x126/0x157 [ 170.137700] [<c051a4dd>] proc_create_data+0x82/0x98 [ 170.138174] [<f94e6af6>] bond_create_proc_entry+0x3f/0x73 [bonding] [ 170.138745] [<f94dd806>] bond_init+0x77/0xa5 [bonding] [ 170.139278] [<c0721ac6>] register_netdevice+0x8c/0x1d3 [ 170.139828] [<f94e0e30>] bond_create+0x6c/0x90 [bonding] [ 170.140361] [<f94f4763>] bonding_init+0x763/0x7b1 [bonding] [ 170.140927] [<c0401240>] do_one_initcall+0x76/0x122 [ 170.141494] [<f94f4000>] ? 0xf94f3fff [ 170.141975] [<c0463f1e>] sys_init_module+0x1286/0x140d [ 170.142463] [<c07c6d9f>] sysenter_do_call+0x12/0x28 [ 170.142974] ---[ end trace 64e4fac3ae5fff1b ]--- [ 170.144949] bond%d: Warning: failed to register to debugfs Signed-off-by: Weiping Pan <panweiping3@gmail.com> Reviewed-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13stmmac: fix autoneg in set_pauseparamGiuseppe CAVALLARO
This patch fixes a bug in the set_pauseparam function that didn't well manage the ANE field and returned broken values when use ethtool -A|-a. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13stmmac: don't go through ethtool to start auto-negotiationDavid Decotigny
The driver used to call phy's ethtool configuration routine to start auto-negotiation. This change has it call directly phy's routine to start auto-negotiation. The initial version was hiding phy_start_aneg() return value, this patch returns it (<0 upon error). Tested: module compiles, tested on STM HDK7108 STB. Signed-off-by: David Decotigny <decot@google.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13drivers/isdn/hisax: Drop unused listJulia Lawall
The file st5481_init.c locally defines and initializes the adapter_list variable, but does not use it for anything. Removing the list makes it possible to remove the list field from the st5481_adapter data structure. In the function probe_st5481, it also makes it possible to free the locally allocated adapter value on an error exit. Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13net: ipv4: add IPPROTO_ICMP socket kindVasiliy Kulikov
This patch adds IPPROTO_ICMP socket kind. It makes it possible to send ICMP_ECHO messages and receive the corresponding ICMP_ECHOREPLY messages without any special privileges. In other words, the patch makes it possible to implement setuid-less and CAP_NET_RAW-less /bin/ping. In order not to increase the kernel's attack surface, the new functionality is disabled by default, but is enabled at bootup by supporting Linux distributions, optionally with restriction to a group or a group range (see below). Similar functionality is implemented in Mac OS X: http://www.manpagez.com/man/4/icmp/ A new ping socket is created with socket(PF_INET, SOCK_DGRAM, PROT_ICMP) Message identifiers (octets 4-5 of ICMP header) are interpreted as local ports. Addresses are stored in struct sockaddr_in. No port numbers are reserved for privileged processes, port 0 is reserved for API ("let the kernel pick a free number"). There is no notion of remote ports, remote port numbers provided by the user (e.g. in connect()) are ignored. Data sent and received include ICMP headers. This is deliberate to: 1) Avoid the need to transport headers values like sequence numbers by other means. 2) Make it easier to port existing programs using raw sockets. ICMP headers given to send() are checked and sanitized. The type must be ICMP_ECHO and the code must be zero (future extensions might relax this, see below). The id is set to the number (local port) of the socket, the checksum is always recomputed. ICMP reply packets received from the network are demultiplexed according to their id's, and are returned by recv() without any modifications. IP header information and ICMP errors of those packets may be obtained via ancillary data (IP_RECVTTL, IP_RETOPTS, and IP_RECVERR). ICMP source quenches and redirects are reported as fake errors via the error queue (IP_RECVERR); the next hop address for redirects is saved to ee_info (in network order). socket(2) is restricted to the group range specified in "/proc/sys/net/ipv4/ping_group_range". It is "1 0" by default, meaning that nobody (not even root) may create ping sockets. Setting it to "100 100" would grant permissions to the single group (to either make /sbin/ping g+s and owned by this group or to grant permissions to the "netadmins" group), "0 4294967295" would enable it for the world, "100 4294967295" would enable it for the users, but not daemons. The existing code might be (in the unlikely case anyone needs it) extended rather easily to handle other similar pairs of ICMP messages (Timestamp/Reply, Information Request/Reply, Address Mask Request/Reply etc.). Userspace ping util & patch for it: http://openwall.info/wiki/people/segoon/ping For Openwall GNU/*/Linux it was the last step on the road to the setuid-less distro. A revision of this patch (for RHEL5/OpenVZ kernels) is in use in Owl-current, such as in the 2011/03/12 LiveCD ISOs: http://mirrors.kernel.org/openwall/Owl/current/iso/ Initially this functionality was written by Pavel Kankovsky for Linux 2.4.32, but unfortunately it was never made public. All ping options (-b, -p, -Q, -R, -s, -t, -T, -M, -I), are tested with the patch. PATCH v3: - switched to flowi4. - minor changes to be consistent with raw sockets code. PATCH v2: - changed ping_debug() to pr_debug(). - removed CONFIG_IP_PING. - removed ping_seq_fops.owner field (unused for procfs). - switched to proc_net_fops_create(). - switched to %pK in seq_printf(). PATCH v1: - fixed checksumming bug. - CAP_NET_RAW may not create icmp sockets anymore. RFC v2: - minor cleanups. - introduced sysctl'able group range to restrict socket(2). Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13convert old cpumask API into new oneKOSAKI Motohiro
Adapt new API. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13af_iucv: get rid of compile warningUrsula Braun
-Wunused-but-set-variable generates compile warnings. The affected variables are removed. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13iucv: get rid of compile warningUrsula Braun
-Wunused-but-set-variable generates a compile warning. The affected variable is removed. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13ctcm: get rid of compile warningUrsula Braun
-Wunused-but-set-variable generates compile warnings. The affected variables are removed. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13lcs: get rid of compile warningHeiko Carstens
-Wunused-but-set-variable generates a compile warning for lcs' tasklet function. Invoked functions contain already error handling; thus additional return code checking is not needed here. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13claw: remove unused return code handlingHeiko Carstens
Remove unused return code handling. The claw driver is mostly dead, so just make sure it keeps compiling without warnings. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13qeth: add owner to ccw driverSebastian Ott
Fill in the owner of qeth's ccw device driver. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13qeth: add OSA concurrent hardware trapFrank Blaschka
This patch improves FFDC (first failure data capture) by requesting a hardware trace in case the device driver, the hardware or a user detects an error. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13qeth: convert to hw_features part 2Frank Blaschka
Set rx csum default to hw checksumming again. Remove sysfs interface for rx csum (checksumming) and TSO (large_send). With the new hw_features it does not work to keep the old sysfs interface in parallel. Convert options.checksum_type to new hw_features. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13qlcnic: Bumped up version number to 5.0.18Anirban Chakraborty
Update driver version number Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13qlcnic: Take FW dump via ethtoolAnirban Chakraborty
Driver checks if the previous dump has been cleared before taking the dump. It doesn't take the dump if it is not cleared. Changes from v2: Added lock to protect dump data structures from being mangled while dumping or setting them via ethtool. Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13qlcnic: FW dump supportAnirban Chakraborty
Added code to take FW dump. o Driver queries FW at the init time and gets the dump template o It takes FW dump as per the dump template o Level of FW dump (and its size) is configured via dump flag Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-27 05:30:34 +0000