aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2006-12-06Linux 2.6.16.35v2.6.16.35Adrian Bunk
2006-12-04Linux 2.6.16.35-rc1v2.6.16.35-rc1Adrian Bunk
2006-12-04bridge: fix possible overflow in get_fdb_entries (CVE-2006-5751)Chris Wright
Make sure to properly clamp maxnum to avoid overflow (CVE-2006-5751). Signed-off-by: Chris Wright <chrisw@sous-sol.org> Acked-by: Stephen Hemminger <shemminger@osdl.org> Acked-by: David Miller <davem@davemloft.net> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-12-04fcntl(F_SETSIG) fixTrond Myklebust
fcntl(F_SETSIG) no longer works on leases because lease_release_private_callback() gets called as the lease is copied in order to initialise it. The problem is that lease_alloc() performs an unnecessary initialisation, which sets the lease_manager_ops. Avoid the problem by allocating the target lease structure using locks_alloc_lock(). Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-12-04cciss: fix iostatJens Axboe
cciss needs to call disk_stat_add() for iostat to work. Signed-off-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-12-04cpqarray: fix iostatJens Axboe
cpqarray needs to call disk_stat_add() for iostat to work. Signed-off-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-12-04alim15x3.c: M5229 (rev c8) support for DMA cd-writerMichael De Backer
Configuration bits are not set properly for DMA on some chipset revisions. It has already been corrected for M5229 (rev c7) but not for M5229 (rev c8). This leads to the bug described at http://bugzilla.kernel.org/show_bug.cgi?id=5786 (lost interrupt + ide bus hangs). Signed-off-by: Michael De Backer <micdb@skynet.be> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-12-04alpha: Fix ALPHA_EV56 dependencies typoFernando J. Pereda
There appears to be a typo in the EV56 config option. NORITAKE and PRIMO are be able to set a variation of either. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-12-04Char: isicom, fix close bugJiri Slaby
port is dereferenced even if it is NULL. Dereference it _after_ the check if (!port)... Thanks Eric <ef87@yahoo.com> for reporting this. This fixes http://bugzilla.kernel.org/show_bug.cgi?id=7527 Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-12-04Input: logips2pp - fix button mapping for MX300Roberto Castagnola
MX300 does not have an EXTRA_BTN - it is a simple wheel mouse with an additional task-switcher button, which is reported as side button (and not task button). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-12-04Input: psmouse - add detection of Logitech TrackMan Wheel trackballZbigniew Luszpinski
Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-12-04Remove redundant up() in stop_machine()Zhou Yingchao
An up() is called in kernel/stop_machine.c on failure, and also in the caller (unconditionally). Signed-off-by: Zhou Yingchao <yingchao.zhou@gmail.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-12-04[EBTABLES]: Prevent wraparounds in checks for entry components' sizes.Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-12-04[EBTABLES]: Deal with the worst-case behaviour in loop checks.Al Viro
No need to revisit a chain we'd already finished with during the check for current hook. It's either instant loop (which we'd just detected) or a duplicate work. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-12-04[EBTABLES]: Verify that ebt_entries have zero ->distinguisher.Al Viro
We need that for iterator to work; existing check had been too weak. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-12-04[EBTABLES]: Fix wraparounds in ebt_entries verification.Al Viro
We need to verify that a) we are not too close to the end of buffer to dereference b) next entry we'll be checking won't be _before_ our While we are at it, don't subtract unrelated pointers... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-12-04[NET_SCHED]: policer: restore compatibility with old iproute binariesPatrick McHardy
The tc actions increased the size of struct tc_police, which broke compatibility with old iproute binaries since both the act_police and the old NET_CLS_POLICE code check for an exact size match. Since the new members are not even used, the simple fix is to also accept the size of the old structure. Dumping is not affected since old userspace will receive a bigger structure, which is handled fine. Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-12-04[PKT_SCHED] act_gact: division by zeroKim Nordlund
Not returning -EINVAL, because someone might want to use the value zero in some future gact_prob algorithm? Signed-off-by: Kim Nordlund <kim.nordlund@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-12-04JFS: pageno needs to be longDave Kleikamp
diRead and diWrite are representing the page number as an unsigned int. This causes file system corruption on volumes larger than 16TB. Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-12-04[IPV6]: Fix address/interface handling in UDP and DCCP, according to the ↵YOSHIFUJI Hideaki
scoping architecture. TCP and RAW do not have this issue. Closes Bug #7432. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-12-04remove garbage the sneaked into the ext3 fixAdrian Bunk
Spotted by Thomas Voegtle. Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-29freevxfs: Add missing lock_kernel() to vxfs_readdirJosh Triplett
Commit 7b2fd697427e73c81d5fa659efd91bd07d303b0e in the historical GIT tree stopped calling the readdir member of a file_operations struct with the big kernel lock held, and fixed up all the readdir functions to do their own locking. However, that change added calls to unlock_kernel() in vxfs_readdir, but no call to lock_kernel(). Fix this by adding a call to lock_kernel(). Signed-off-by: Josh Triplett <josh@freedesktop.org> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-29Fix incorrent type of flags in <asm/semaphore.h>Kyle McMartin
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-29sgiioc4: Disable module unloadJeremy Higdon
This patch removes a module_exit function that sgiioc4 should not have had. It seems that the IDE layer doesn't support submodule unloading. sgiioc4 was the only driver in drivers/ide/pci that had an exit function. After an unload, the devices would stay around and the next attempt to reference would crash... Signed-off-by: Jeremy Higdon <jeremy@sgi.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-29proper flags type of spin_lock_irqsave()Alexey Dobriyan
Convert various spin_lock_irqsave() callers to correctly use `unsigned long' Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-29drivers/usb/input/ati_remote.c: fix cut'n'paste errorAdrian Bunk
Backported from a patch by Mariusz Kozlowski <m.kozlowski@tuxland.pl> in 2.6.19. Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-29block layer: elv_iosched_show should get elv_list_lockVasily Tarasov
elv_iosched_show function iterates other elv_list, hence elv_list_lock should be got. Also the question is: in elv_iosched_show, elv_iosched_store q->elevator->elevator_type construction is used without locking q->queue_lock. Is it expected?.. Signed-off-by: Vasily Tarasov <vtaras@openvz.org> Acked-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-29block: Fix bad data direction in SG_IOJens Axboe
Contrary to what the name misleads you to believe, SG_DXFER_TO_FROM_DEV is really just a normal read seen from the device side. This patch fixes http://lkml.org/lkml/2006/10/13/100 Signed-off-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-29USB: failure in usblp's error pathOliver Neukum
if urb submission fails due to a transient error here eg. ENOMEM, the driver is dead. This fixes it. Signed-off-by: Oliver Neukum <oliver@neukum.name> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-29nvidiafb: fix unreachable code in nv10GetConfigNathan Lynch
Fix binary/logical operator typo which leads to unreachable code. Noticed while looking at other issues; I don't have the relevant hardware to test this. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-29Fix divide by zero error for nvidia 7600 pci-express cardWink Saville
The following patch resolves the divide by zero error I encountered on my system: http://marc.10east.com/?l=linux-fbdev-devel&m=116058257024413&w=2 I accomplished this by merging what I thought was appropriate from: http://webcvs.freedesktop.org/xorg/driver/xf86-video-nv/src/ Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-29MMC: Always use a sector size of 512 bytesPierre Ossman
Both MMC and SD specifications specify (although a bit unclearly in the MMC case) that a sector size of 512 bytes must always be supported by the card. Cards can report larger "native" size than this, and cards >= 2 GB even must do so. Most other readers use 512 bytes even for these cards. We should do the same to be compatible. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-29SCTP: Always linearise packet on inputHerbert Xu
I was looking at a RHEL5 bug report involving Xen and SCTP (https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=212550). It turns out that SCTP wasn't written to handle skb fragments at all. The absence of any calls to skb_may_pull is testament to that. It just so happens that Xen creates fragmented packets more often than other scenarios (header & data split when going from domU to dom0). That's what caused this bug to show up. Until someone has the time sits down and audits the entire net/sctp directory, here is a conservative and safe solution that simply linearises all packets on input. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-29add forgotten ->b_data in memcpy() call in ext3/resize.c (oopsable)Al Viro
sbi->s_group_desc is an array of pointers to buffer_head. memcpy() of buffer size from address of buffer_head is a bad idea - it will generate junk in any case, may oops if buffer_head is close to the end of slab page and next page is not mapped and isn't what was intended there. IOW, ->b_data is missing in that call. Fortunately, result doesn't go into the primary on-disk data structures, so only backup ones get crap written to them; that had allowed this bug to remain unnoticed until now. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-29Fix a masking bug in the 6pack driver.Jean Delvare
Looks like a broken masking to me, binary not is used where bitwise not was intended. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-29[UDP]: Make udp_encap_rcv use pskb_may_pullOlaf Kirch
Make udp_encap_rcv use pskb_may_pull IPsec with NAT-T breaks on some notebooks using the latest e1000 chipset, when header split is enabled. When receiving sufficiently large packets, the driver puts everything up to and including the UDP header into the header portion of the skb, and the rest goes into the paged part. udp_encap_rcv forgets to use pskb_may_pull, and fails to decapsulate it. Instead, it passes it up it to the IKE daemon. Signed-off-by: Olaf Kirch <okir@suse.de> Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-29Linux 2.6.16.34v2.6.16.34Adrian Bunk
2006-11-25Linux 2.6.16.34-rc1v2.6.16.34-rc1Adrian Bunk
2006-11-25[ALSA] echoaudio - Remove kfree_nocheck()Takashi Iwai
Remove obsoleted kfree_nochec() (for debug). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-25[ALSA] echoaudio - Fix MakefileTakashi Iwai
Fix missing makefile entries for echoaudio drivers Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-25[ALSA] Fix a typo in echoaudio/midi.cTakashi Iwai
Fixed a typo in echoaudio/midi.c. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-25[ALSA] Add echoaudio sound driversGiuliano Pochini pochini@shiny.it
Add echoaudio sound drivers (darla20, darla24, echo3g, gina20, gina24, indigo, indigodj, indigoio, layla20, lala24, mia, mona) Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-25CIFS: report rename failure when target file is locked by WindowsSteve French
Fixes Samba bugzilla bug # 4182 Rename by handle failures (retry after rename by path) were not being returned back. Signed-off-by: Steve French <sfrench@us.ibm.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-25i2c: Handle i2c_add_adapter failure in i2c algorithm driversMark M. Hoffman
It is possible for i2c_add_adapter() to fail. Several I2C algorithm drivers ignore that fact. This (compile-tested only) patch fixes them. Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-25[IGMP]: Fix IGMPV3_EXP() normalization bit shift value.David L Stevens
The IGMPV3_EXP() macro doesn't correctly shift the normalization bit, so time-out values are longer than they should be. Thanks to Dirk Ooms for finding the problem in IGMPv3 - MLDv2 had a similar problem that was already fixed a year ago. :-( Signed-off-by: David L Stevens <dlstevens@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-25USB: UHCI: Increase port-reset completion delay for HP controllersAlan Stern
This patch (as657) increases the port-reset completion delay in uhci-hcd for HP's embedded controllers. Unlike other UHCI controllers, the HP chips can take as long as 250 us to carry out the processing associated with finishing a port reset. This fixes Novell bug #148761. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-24[SCSI] hptiop: backout ioctl messChristoph Hellwig
The hptiop just got merged with a horrible amount of really bad ioctl code that is against the standards for new scsi drivers. This patch backs it out (and fixes a small bug where scsi_add_host is called to early). We can re-add proper APIs once we agree on them. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-24[SCSI] hptiop: wrong register used in hptiop_reset_hba()HighPoint Linux Team
IOP reset message should be posted to inbound message register instead of outbound message register. Signed-off-by: HighPoint Linux Team <linux@highpoint-tech.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-24[SCSI] hptiop: don't use cmnd->bufflenJames Bottomley
use cmnd->request_bufflen instead. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-24[SCSI] hptiop: HighPoint RocketRAID 3xxx controller driverHighPoint Linux Team
Updates: - don't bypass SYNCHRONIZE_CACHE command - return SCSI_MLQUEUE_HOST_BUSY when no free request slots - move scsi_remove_host() to the begin of hpt_remove(), or it will not work after resources being released. Signed-off-by: HighPoint Linux Team <linux@highpoint-tech.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-11-28 19:45:37 +0000