aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2006-03-27[PATCH] softmac: reduce scan dwell timeDavid Woodhouse
It currently takes something like 8 seconds to do a scan, because we spend half a second on each channel. Reduce that time to 20ms per channel. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] Minor (janitorial) change to ieee80211Larry Finger
The attached patch removes a potential problem from ieee80211_wx.c, by changing the name of routine ipw2100_translate_scan to ieee80211_translate_scan. The problem is minor as the routine is declared static; however, if it were made global, it would pollute the namespace. Signed-Off-By: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] hostap: Fix EAPOL frame encryptionJouni Malinen
Fixed encrypted of EAPOL frames from wlan#ap interface (hostapd). This was broken when moving to use new frame control field defines in net/ieee80211.h. hostapd uses Protected flag, not protocol version (which was cleared in this function anyway). This fixes WPA group key handshake and re-authentication. http://hostap.epitest.fi/bugz/show_bug.cgi?id=126 Signed-off-by: Jouni Malinen <jkmaline@cc.hut.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] hostap: Make hostap_tx_encrypt() staticJouni Malinen
hostap_tx_encrypt() is used only inside hostap_80211_tx.c and there are no plans to use it elsewhere in the future either, so let's make it static. As a bonus, this should silence Coverity scanner from complaining about bogus FORWARD_NULL case (CID: 274). Signed-off-by: Jouni Malinen <jkmaline@cc.hut.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] zd1201 wireless stat updateJean Tourrilhes
The "dev->get_wireless_stats" field is deprecated and slowly be surely going away. Most drivers have been updated months ago. Actually, there is an annoying message for driver still using it, but it seems that user of zd1201 were not annoyed enough ;-) Signed-off-by: Jean Tourrilhes <jt@hpl.hp.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] PCMCIA_SPECTRUM must select FW_LOADERAdrian Bunk
PCMCIA_SPECTRUM must select FW_LOADER. Reported by "Alexander E. Patrakov" <patrakov@ums.usu.ru>. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: don't set the channel on a device, which is down.Michael Buesch
Initial patch by David Woodhouse and Michael Marineau. Locking fix by me. Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: sync GPHY init with the specs.Michael Buesch
Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: fix the remaining sparse warnings.Michael Buesch
Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: remove some compilerwarnings.Michael Buesch
Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: fix "include" issues on some platforms.Michael Buesch
Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: get rid of "/* vim: ..." lines at the end of several files.Michael Buesch
Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: add useless and broken statistics stuff. People seem to ↵Michael Buesch
want it. well... Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: fix nrssi_threshold calculation.Michael Buesch
patch by doctorzoidberg. Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: sync interference mitigation code to the specs.Michael Buesch
This also includes a rewritten valuesave-stack. Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: set default attenuation values.Michael Buesch
Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: some IRQ handler cleanups.Michael Buesch
Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: merge all iwmode code into the set_iwmode function.Michael Buesch
Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: fix some gpio register trashing (hopefully :D)Michael Buesch
Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: remove check for mmio length, as it differs among ↵Michael Buesch
platforms. (especially embedded) Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: properly mask txctl1 before writing it to hardware.Michael Buesch
This should not make a difference, but be careful to not trash the register. Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: Do boardflags workarounds for specific boards.Michael Buesch
Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: Remove the workaround in dummy_transmission,Michael Buesch
as it causes more trouble than it solves Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: Fix crash on ifdown, by being careful in pio/dma freeing.Michael Buesch
This bug was caused by the packing of the bcm43xx_dma and bcm43xx_pio structures into a union. Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: reduce the size of bcm43xx_private by removing unneeded ↵Michael Buesch
members. Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: add functions bcm43xx_dma_read/write, ↵Michael Buesch
bcm43xx_dma_tx_suspend/resume. Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: receive TX status on MMIO or DMA unconditionally regarding ↵Michael Buesch
the 80211 core rev. Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: fix some stuff, add a few missing mmiowb(), remove dead code.Michael Buesch
This may workaround the XMIT ERRORs some people are getting. Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: Remove the mmio access printing facility overhead.Michael Buesch
Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: Abstract the locking mechanism.Michael Buesch
This is the starting point to make the driver out-of-order-MMIO-stores safe. There are more mmiowb() needed. Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: Set both, the DMAmask and the coherent DMAmask.Michael Buesch
This has a potential to fix the >1G bug. But I can not test that, yet. Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: fix DMA TX skb freeing in case of fragmented packets.Pete Zaitcev
It seems to me that the today's wireless-2.6 git contains bcm43xx which does not free txb's correctly, if I understand it right. Consider a situation where a txb with two skb's is sent down. The dma_tx_fragment will save the pointer to meta->txb of the first fragment. If fragments are freed in order, ieee80211_txb_free frees both skb's when the first fragment is processed. This may result in reuse of the second skb's memory. This danger is rather remote, but it seems to me that the patch below not only fixes the problem, but also makes the code simpler, which is good, right? Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: Add sysfs attributes for device specific tunables.Michael Buesch
Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: Move TX/RX related functions to its own file. Add basic ↵Michael Buesch
RTS/CTS code. Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: add assert(bcm->initialized) to periodic_tasks_setup().Michael Buesch
Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: move initialized = 1 to the end of init_board.Michael Buesch
Note that the periodic work has to be started with initialized==1 Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: Workaround init_board vs IRQ race.Michael Buesch
The proper fix for this is to move IRQ enabling to the end of init_board. But this is nontrivial and needs to be done with care. Stay with this cheap workaround for now. Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: Fix Kconfig typo (transfer mode default)Michael Buesch
Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: remove old unused struct.Michael Buesch
Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: split the channel helper functions, so that they can be ↵Michael Buesch
used without a valid running core. Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: make bcm43xx_sprom_crc() static.Michael Buesch
Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: Move sprom lowlevel reading/writing to its own functions.Michael Buesch
Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: Code cleanups. This removes various "inline" statements and ↵Michael Buesch
reduces codesize. Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: rewrite and simplify the periodic task handling.Michael Buesch
Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: fix LED code.Michael Buesch
Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: update READMEMichael Buesch
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] Apple Airport: Add Kconfig note that the bcm43xx driver has to be ↵Michael Buesch
used for Airport Extreme cards. Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: add a note that not all devices support PIO.Michael Buesch
Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: Partially fix PIO code. Add Kconfig option for PIO or DMA ↵Michael Buesch
mode (or both). Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: remove WX debugging.Michael Buesch
Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-11-24 23:03:01 +0000