diff options
Diffstat (limited to 'tools/testing/ktest/ktest.pl')
| -rwxr-xr-x | tools/testing/ktest/ktest.pl | 255 |
1 files changed, 251 insertions, 4 deletions
diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index 6166f3a0f2e..5323c6f9bf9 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -86,6 +86,9 @@ my $make; my $post_install; my $noclean; my $minconfig; +my $start_minconfig; +my $output_minconfig; +my $ignore_config; my $addconfig; my $in_bisect = 0; my $bisect_bad = ""; @@ -1189,7 +1192,11 @@ sub apply_min_config { sub make_oldconfig { - apply_min_config; + my @force_list = keys %force_config; + + if ($#force_list >= 0) { + apply_min_config; + } if (!run_command "$make oldnoconfig") { # Perhaps oldnoconfig doesn't exist in this version of the kernel @@ -1678,21 +1685,27 @@ my %null_config; my %dependency; -sub process_config_ignore { - my ($config) = @_; +sub assign_configs { + my ($hash, $config) = @_; open (IN, $config) or dodie "Failed to read $config"; while (<IN>) { if (/^((CONFIG\S*)=.*)/) { - $config_ignore{$2} = $1; + ${$hash}{$2} = $1; } } close(IN); } +sub process_config_ignore { + my ($config) = @_; + + assign_configs \%config_ignore, $config; +} + sub read_current_config { my ($config_ref) = @_; @@ -2149,6 +2162,226 @@ sub patchcheck { return 1; } +sub read_config_list { + my ($config) = @_; + + open (IN, $config) + or dodie "Failed to read $config"; + + while (<IN>) { + if (/^((CONFIG\S*)=.*)/) { + if (!defined($config_ignore{$2})) { + $config_list{$2} = $1; + } + } + } + + close(IN); +} + +sub read_output_config { + my ($config) = @_; + + assign_configs \%config_ignore, $config; +} + +sub make_new_config { + my @configs = @_; + + open (OUT, ">$output_config") + or dodie "Failed to write $output_config"; + + foreach my $config (@configs) { + print OUT "$config\n"; + } + close OUT; +} + +sub make_min_config { + my ($i) = @_; + + if (!defined($output_minconfig)) { + fail "OUTPUT_MIN_CONFIG not defined" and return; + } + if (!defined($start_minconfig)) { + fail "START_MIN_CONFIG or MIN_CONFIG not defined" and return; + } + + # First things first. We build an allnoconfig to find + # out what the defaults are that we can't touch. + # Some are selections, but we really can't handle selections. + + my $save_minconfig = $minconfig; + undef $minconfig; + + run_command "$make allnoconfig" or return 0; + + process_config_ignore $output_config; + my %keep_configs; + + if (defined($ignore_config)) { + # make sure the file exists + `touch $ignore_config`; + assign_configs \%keep_configs, $ignore_config; + } + + doprint "Load initial configs from $start_minconfig\n"; + + # Look at the current min configs, and save off all the + # ones that were set via the allnoconfig + my %min_configs; + assign_configs \%min_configs, $start_minconfig; + + my @config_keys = keys %min_configs; + + # Remove anything that was set by the make allnoconfig + # we shouldn't need them as they get set for us anyway. + foreach my $config (@config_keys) { + # Remove anything in the ignore_config + if (defined($keep_configs{$config})) { + my $file = $ignore_config; + $file =~ s,.*/(.*?)$,$1,; + doprint "$config set by $file ... ignored\n"; + delete $min_configs{$config}; + next; + } + # But make sure the settings are the same. If a min config + # sets a selection, we do not want to get rid of it if + # it is not the same as what we have. Just move it into + # the keep configs. + if (defined($config_ignore{$config})) { + if ($config_ignore{$config} ne $min_configs{$config}) { + doprint "$config is in allnoconfig as '$config_ignore{$config}'"; + doprint " but it is '$min_configs{$config}' in minconfig .. keeping\n"; + $keep_configs{$config} = $min_configs{$config}; + } else { + doprint "$config set by allnoconfig ... ignored\n"; + } + delete $min_configs{$config}; + } + } + + my %nochange_config; + + my $done = 0; + + while (!$done) { + + my $config; + my $found; + + # Now disable each config one by one and do a make oldconfig + # till we find a config that changes our list. + + # Put configs that did not modify the config at the end. + my @test_configs = keys %min_configs; + my $reset = 1; + for (my $i = 0; $i < $#test_configs; $i++) { + if (!defined($nochange_config{$test_configs[0]})) { + $reset = 0; + last; + } + # This config didn't change the .config last time. + # Place it at the end + my $config = shift @test_configs; + push @test_configs, $config; + } + + # if every test config has failed to modify the .config file + # in the past, then reset and start over. + if ($reset) { + undef %nochange_config; + } + + foreach my $config (@test_configs) { + + # Remove this config from the list of configs + # do a make oldnoconfig and then read the resulting + # .config to make sure it is missing the config that + # we had before + my %configs = %min_configs; + delete $configs{$config}; + make_new_config ((values %configs), (values %keep_configs)); + make_oldconfig; + undef %configs; + assign_configs \%configs, $output_config; + + if (!defined($configs{$config})) { + $found = $config; + last; + } + + doprint "disabling config $config did not change .config\n"; + + # oh well, try another config + $nochange_config{$config} = 1; + } + + if (!defined($found)) { + doprint "No more configs found that we can disable\n"; + $done = 1; + last; + } + + $config = $found; + + doprint "Test with $config disabled\n"; + + # set in_bisect to keep build and monitor from dieing + $in_bisect = 1; + + my $failed = 0; + build "oldconfig"; + start_monitor_and_boot or $failed = 1; + end_monitor; + + $in_bisect = 0; + + if ($failed) { + doprint "$config is needed to boot the box... keeping\n"; + # this config is needed, add it to the ignore list. + $keep_configs{$config} = $min_configs{$config}; + delete $min_configs{$config}; + } else { + # We booted without this config, remove it from the minconfigs. + doprint "$config is not needed, disabling\n"; + + delete $min_configs{$config}; + + # Also disable anything that is not enabled in this config + my %configs; + assign_configs \%configs, $output_config; + my @config_keys = keys %min_configs; + foreach my $config (@config_keys) { + if (!defined($configs{$config})) { + doprint "$config is not set, disabling\n"; + delete $min_configs{$config}; + } + } + + # Save off all the current mandidory configs + open (OUT, ">$output_minconfig") + or die "Can't write to $output_minconfig"; + foreach my $config (keys %keep_configs) { + print OUT "$keep_configs{$config}\n"; + } + foreach my $config (keys %min_configs) { + print OUT "$min_configs{$config}\n"; + } + close OUT; + } + + doprint "Reboot and wait $sleep_time seconds\n"; + reboot; + start_monitor; + wait_for_monitor $sleep_time; + end_monitor; + } + + success $i; + return 1; +} + $#ARGV < 1 or die "ktest.pl version: $VERSION\n usage: ktest.pl config-file\n"; if ($#ARGV == 0) { @@ -2294,6 +2527,9 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { $reboot = set_test_option("REBOOT", $i); $noclean = set_test_option("BUILD_NOCLEAN", $i); $minconfig = set_test_option("MIN_CONFIG", $i); + $output_minconfig = set_test_option("OUTPUT_MIN_CONFIG", $i); + $start_minconfig = set_test_option("START_MIN_CONFIG", $i); + $ignore_config = set_test_option("IGNORE_CONFIG", $i); $run_test = set_test_option("TEST", $i); $addconfig = set_test_option("ADD_CONFIG", $i); $reboot_type = set_test_option("REBOOT_TYPE", $i); @@ -2329,6 +2565,10 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { $target_image = set_test_option("TARGET_IMAGE", $i); $localversion = set_test_option("LOCALVERSION", $i); + if (!defined($start_minconfig)) { + $start_minconfig = $minconfig; + } + chdir $builddir || die "can't change directory to $builddir"; if (!-d $tmpdir) { @@ -2361,6 +2601,10 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { $run_type = $opt{"CONFIG_BISECT_TYPE[$i]"}; } + if ($test_type eq "make_min_config") { + $run_type = ""; + } + # mistake in config file? if (!defined($run_type)) { $run_type = "ERROR"; @@ -2396,6 +2640,9 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { } elsif ($test_type eq "patchcheck") { patchcheck $i; next; + } elsif ($test_type eq "make_min_config") { + make_min_config $i; + next; } if ($build_type ne "nobuild") { |