diff options
Diffstat (limited to 'sound')
110 files changed, 8411 insertions, 3534 deletions
diff --git a/sound/arm/pxa2xx-ac97-lib.c b/sound/arm/pxa2xx-ac97-lib.c index 35afd0c33be..2e6355f4cbb 100644 --- a/sound/arm/pxa2xx-ac97-lib.c +++ b/sound/arm/pxa2xx-ac97-lib.c @@ -31,6 +31,7 @@ static DECLARE_WAIT_QUEUE_HEAD(gsr_wq); static volatile long gsr_bits; static struct clk *ac97_clk; static struct clk *ac97conf_clk; +static int reset_gpio; /* * Beware PXA27x bugs: @@ -42,6 +43,45 @@ static struct clk *ac97conf_clk; * 1 jiffy timeout if interrupt never comes). */ +enum { + RESETGPIO_FORCE_HIGH, + RESETGPIO_FORCE_LOW, + RESETGPIO_NORMAL_ALTFUNC +}; + +/** + * set_resetgpio_mode - computes and sets the AC97_RESET gpio mode on PXA + * @mode: chosen action + * + * As the PXA27x CPUs suffer from a AC97 bug, a manual control of the reset line + * must be done to insure proper work of AC97 reset line. This function + * computes the correct gpio_mode for further use by reset functions, and + * applied the change through pxa_gpio_mode. + */ +static void set_resetgpio_mode(int resetgpio_action) +{ + int mode = 0; + + if (reset_gpio) + switch (resetgpio_action) { + case RESETGPIO_NORMAL_ALTFUNC: + if (reset_gpio == 113) + mode = 113 | GPIO_OUT | GPIO_DFLT_LOW; + if (reset_gpio == 95) + mode = 95 | GPIO_ALT_FN_1_OUT; + break; + case RESETGPIO_FORCE_LOW: + mode = reset_gpio | GPIO_OUT | GPIO_DFLT_LOW; + break; + case RESETGPIO_FORCE_HIGH: + mode = reset_gpio | GPIO_OUT | GPIO_DFLT_HIGH; + break; + }; + + if (mode) + pxa_gpio_mode(mode); +} + unsigned short pxa2xx_ac97_read(struct snd_ac97 *ac97, unsigned short reg) { unsigned short val = -1; @@ -137,10 +177,10 @@ static inline void pxa_ac97_warm_pxa27x(void) /* warm reset broken on Bulverde, so manually keep AC97 reset high */ - pxa_gpio_mode(113 | GPIO_OUT | GPIO_DFLT_HIGH); + set_resetgpio_mode(RESETGPIO_FORCE_HIGH); udelay(10); GCR |= GCR_WARM_RST; - pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT); + set_resetgpio_mode(RESETGPIO_NORMAL_ALTFUNC); udelay(500); } @@ -308,8 +348,8 @@ int pxa2xx_ac97_hw_resume(void) pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD); } if (cpu_is_pxa27x()) { - /* Use GPIO 113 as AC97 Reset on Bulverde */ - pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT); + /* Use GPIO 113 or 95 as AC97 Reset on Bulverde */ + set_resetgpio_mode(RESETGPIO_NORMAL_ALTFUNC); } clk_enable(ac97_clk); return 0; @@ -320,6 +360,27 @@ EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_resume); int __devinit pxa2xx_ac97_hw_probe(struct platform_device *dev) { int ret; + struct pxa2xx_ac97_platform_data *pdata = dev->dev.platform_data; + + if (pdata) { + switch (pdata->reset_gpio) { + case 95: + case 113: + reset_gpio = pdata->reset_gpio; + break; + case 0: + reset_gpio = 113; + break; + case -1: + break; + default: + dev_err(&dev->dev, "Invalid reset GPIO %d\n", + pdata->reset_gpio); + } + } else { + if (cpu_is_pxa27x()) + reset_gpio = 113; + } if (cpu_is_pxa25x() || cpu_is_pxa27x()) { pxa_gpio_mode(GPIO31_SYNC_AC97_MD); @@ -330,7 +391,7 @@ int __devinit pxa2xx_ac97_hw_probe(struct platform_device *dev) if (cpu_is_pxa27x()) { /* Use GPIO 113 as AC97 Reset on Bulverde */ - pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT); + set_resetgpio_mode(RESETGPIO_NORMAL_ALTFUNC); ac97conf_clk = clk_get(&dev->dev, "AC97CONFCLK"); if (IS_ERR(ac97conf_clk)) { ret = PTR_ERR(ac97conf_clk); diff --git a/sound/soc/Kconfig b/sound/soc/Kconfig index ef025c66cc6..3d2bb6fc6dc 100644 --- a/sound/soc/Kconfig +++ b/sound/soc/Kconfig @@ -6,6 +6,7 @@ menuconfig SND_SOC tristate "ALSA for SoC audio support" select SND_PCM select AC97_BUS if SND_SOC_AC97_BUS + select SND_JACK if INPUT=y || INPUT=SND ---help--- If you want ASoC support, you should say Y here and also to the diff --git a/sound/soc/Makefile b/sound/soc/Makefile index 86a9b1f5b0f..0237879fd41 100644 --- a/sound/soc/Makefile +++ b/sound/soc/Makefile @@ -1,4 +1,4 @@ -snd-soc-core-objs := soc-core.o soc-dapm.o +snd-soc-core-objs := soc-core.o soc-dapm.o soc-jack.o obj-$(CONFIG_SND_SOC) += snd-soc-core.o obj-$(CONFIG_SND_SOC) += codecs/ diff --git a/sound/soc/atmel/atmel-pcm.c b/sound/soc/atmel/atmel-pcm.c index 3dcdc4e3cfa..9ef6b96373f 100644 --- a/sound/soc/atmel/atmel-pcm.c +++ b/sound/soc/atmel/atmel-pcm.c @@ -347,7 +347,7 @@ static int atmel_pcm_mmap(struct snd_pcm_substream *substream, vma->vm_end - vma->vm_start, vma->vm_page_prot); } -struct snd_pcm_ops atmel_pcm_ops = { +static struct snd_pcm_ops atmel_pcm_ops = { .open = atmel_pcm_open, .close = atmel_pcm_close, .ioctl = snd_pcm_lib_ioctl, diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c index ff0054b7650..e588e63f18d 100644 --- a/sound/soc/atmel/atmel_ssc_dai.c +++ b/sound/soc/atmel/atmel_ssc_dai.c @@ -697,6 +697,15 @@ static int atmel_ssc_resume(struct snd_soc_dai *cpu_dai) #define ATMEL_SSC_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE |\ SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) +static struct snd_soc_dai_ops atmel_ssc_dai_ops = { + .startup = atmel_ssc_startup, + .shutdown = atmel_ssc_shutdown, + .prepare = atmel_ssc_prepare, + .hw_params = atmel_ssc_hw_params, + .set_fmt = atmel_ssc_set_dai_fmt, + .set_clkdiv = atmel_ssc_set_dai_clkdiv, +}; + struct snd_soc_dai atmel_ssc_dai[NUM_SSC_DEVICES] = { { .name = "atmel-ssc0", .id = 0, @@ -712,13 +721,7 @@ struct snd_soc_dai atmel_ssc_dai[NUM_SSC_DEVICES] = { .channels_max = 2, .rates = ATMEL_SSC_RATES, .formats = ATMEL_SSC_FORMATS,}, - .ops = { - .startup = atmel_ssc_startup, - .shutdown = atmel_ssc_shutdown, - .prepare = atmel_ssc_prepare, - .hw_params = atmel_ssc_hw_params, - .set_fmt = atmel_ssc_set_dai_fmt, - .set_clkdiv = atmel_ssc_set_dai_clkdiv,}, + .ops = &atmel_ssc_dai_ops, .private_data = &ssc_info[0], }, #if NUM_SSC_DEVICES == 3 @@ -736,13 +739,7 @@ struct snd_soc_dai atmel_ssc_dai[NUM_SSC_DEVICES] = { .channels_max = 2, .rates = ATMEL_SSC_RATES, .formats = ATMEL_SSC_FORMATS,}, - .ops = { - .startup = atmel_ssc_startup, - .shutdown = atmel_ssc_shutdown, - .prepare = atmel_ssc_prepare, - .hw_params = atmel_ssc_hw_params, - .set_fmt = atmel_ssc_set_dai_fmt, - .set_clkdiv = atmel_ssc_set_dai_clkdiv,}, + .ops = &atmel_ssc_dai_ops, .private_data = &ssc_info[1], }, { .name = "atmel-ssc2", @@ -759,13 +756,7 @@ struct snd_soc_dai atmel_ssc_dai[NUM_SSC_DEVICES] = { .channels_max = 2, .rates = ATMEL_SSC_RATES, .formats = ATMEL_SSC_FORMATS,}, - .ops = { - .startup = atmel_ssc_startup, - .shutdown = atmel_ssc_shutdown, - .prepare = atmel_ssc_prepare, - .hw_params = atmel_ssc_hw_params, - .set_fmt = atmel_ssc_set_dai_fmt, - .set_clkdiv = atmel_ssc_set_dai_clkdiv,}, + .ops = &atmel_ssc_dai_ops, .private_data = &ssc_info[2], }, #endif diff --git a/sound/soc/atmel/playpaq_wm8510.c b/sound/soc/atmel/playpaq_wm8510.c index 43dd8cee83c..70657534e6b 100644 --- a/sound/soc/atmel/playpaq_wm8510.c +++ b/sound/soc/atmel/playpaq_wm8510.c @@ -164,38 +164,38 @@ static int playpaq_wm8510_hw_params(struct snd_pcm_substream *substream, */ switch (params_rate(params)) { case 48000: - pll_out = 12288000; - mclk_div = WM8510_MCLKDIV_1; + pll_out = 24576000; + mclk_div = WM8510_MCLKDIV_2; bclk = WM8510_BCLKDIV_8; break; case 44100: - pll_out = 11289600; - mclk_div = WM8510_MCLKDIV_1; + pll_out = 22579200; + mclk_div = WM8510_MCLKDIV_2; bclk = WM8510_BCLKDIV_8; break; case 22050: |