aboutsummaryrefslogtreecommitdiff
path: root/sound/soc/codecs/tlv320dac33.c
diff options
context:
space:
mode:
Diffstat (limited to 'sound/soc/codecs/tlv320dac33.c')
-rw-r--r--sound/soc/codecs/tlv320dac33.c180
1 files changed, 127 insertions, 53 deletions
diff --git a/sound/soc/codecs/tlv320dac33.c b/sound/soc/codecs/tlv320dac33.c
index 65adc77eada..8651b01ed22 100644
--- a/sound/soc/codecs/tlv320dac33.c
+++ b/sound/soc/codecs/tlv320dac33.c
@@ -49,8 +49,6 @@
#define NSAMPLE_MAX 5700
-#define LATENCY_TIME_MS 20
-
#define MODE7_LTHR 10
#define MODE7_UTHR (DAC33_BUFFER_SIZE_SAMPLES - 10)
@@ -62,6 +60,9 @@
#define US_TO_SAMPLES(rate, us) \
(rate / (1000000 / us))
+#define UTHR_FROM_PERIOD_SIZE(samples, playrate, burstrate) \
+ ((samples * 5000) / ((burstrate * 5000) / (burstrate - playrate)))
+
static void dac33_calculate_times(struct snd_pcm_substream *substream);
static int dac33_prepare_chip(struct snd_pcm_substream *substream);
@@ -107,6 +108,10 @@ struct tlv320dac33_priv {
* this */
enum dac33_fifo_modes fifo_mode;/* FIFO mode selection */
unsigned int nsample; /* burst read amount from host */
+ int mode1_latency; /* latency caused by the i2c writes in
+ * us */
+ int auto_fifo_config; /* Configure the FIFO based on the
+ * period size */
u8 burst_bclkdiv; /* BCLK divider value in burst mode */
unsigned int burst_rate; /* Interface speed in Burst modes */
@@ -120,6 +125,8 @@ struct tlv320dac33_priv {
* samples */
unsigned int mode7_us_to_lthr; /* Time to reach lthr from uthr */
+ unsigned int uthr;
+
enum dac33_state state;
};
@@ -442,6 +449,39 @@ static int dac33_set_nsample(struct snd_kcontrol *kcontrol,
return ret;
}
+static int dac33_get_uthr(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
+
+ ucontrol->value.integer.value[0] = dac33->uthr;
+
+ return 0;
+}
+
+static int dac33_set_uthr(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
+ int ret = 0;
+
+ if (dac33->substream)
+ return -EBUSY;
+
+ if (dac33->uthr == ucontrol->value.integer.value[0])
+ return 0;
+
+ if (ucontrol->value.integer.value[0] < (MODE7_LTHR + 10) ||
+ ucontrol->value.integer.value[0] > MODE7_UTHR)
+ ret = -EINVAL;
+ else
+ dac33->uthr = ucontrol->value.integer.value[0];
+
+ return ret;
+}
+
static int dac33_get_fifo_mode(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
@@ -503,13 +543,18 @@ static const struct snd_kcontrol_new dac33_snd_controls[] = {
DAC33_LINEL_TO_LLO_VOL, DAC33_LINER_TO_RLO_VOL, 0, 127, 1),
};
-static const struct snd_kcontrol_new dac33_nsample_snd_controls[] = {
- SOC_SINGLE_EXT("nSample", 0, 0, 5900, 0,
- dac33_get_nsample, dac33_set_nsample),
+static const struct snd_kcontrol_new dac33_mode_snd_controls[] = {
SOC_ENUM_EXT("FIFO Mode", dac33_fifo_mode_enum,
dac33_get_fifo_mode, dac33_set_fifo_mode),
};
+static const struct snd_kcontrol_new dac33_fifo_snd_controls[] = {
+ SOC_SINGLE_EXT("nSample", 0, 0, 5900, 0,
+ dac33_get_nsample, dac33_set_nsample),
+ SOC_SINGLE_EXT("UTHR", 0, 0, MODE7_UTHR, 0,
+ dac33_get_uthr, dac33_set_uthr),
+};
+
/* Analog bypass */
static const struct snd_kcontrol_new dac33_dapm_abypassl_control =
SOC_DAPM_SINGLE("Switch", DAC33_LINEL_TO_LLO_VOL, 7, 1, 1);
@@ -612,7 +657,7 @@ static inline void dac33_prefill_handler(struct tlv320dac33_priv *dac33)
switch (dac33->fifo_mode) {
case DAC33_FIFO_MODE1:
dac33_write16(codec, DAC33_NSAMPLE_MSB,
- DAC33_THRREG(dac33->nsample + dac33->alarm_threshold));
+ DAC33_THRREG(dac33->nsample));
/* Take the timestamps */
spin_lock_irq(&dac33->lock);
@@ -761,6 +806,10 @@ static void dac33_shutdown(struct snd_pcm_substream *substream,
struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
dac33->substream = NULL;
+
+ /* Reset the nSample restrictions */
+ dac33->nsample_min = 0;
+ dac33->nsample_max = NSAMPLE_MAX;
}
static int dac33_hw_params(struct snd_pcm_substream *substream,
@@ -985,7 +1034,7 @@ static int dac33_prepare_chip(struct snd_pcm_substream *substream)
* Configure the threshold levels, and leave 10 sample space
* at the bottom, and also at the top of the FIFO
*/
- dac33_write16(codec, DAC33_UTHR_MSB, DAC33_THRREG(MODE7_UTHR));
+ dac33_write16(codec, DAC33_UTHR_MSB, DAC33_THRREG(dac33->uthr));
dac33_write16(codec, DAC33_LTHR_MSB, DAC33_THRREG(MODE7_LTHR));
break;
default:
@@ -1003,57 +1052,71 @@ static void dac33_calculate_times(struct snd_pcm_substream *substream)
struct snd_soc_device *socdev = rtd->socdev;
struct snd_soc_codec *codec = socdev->card->codec;
struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
+ unsigned int period_size = substream->runtime->period_size;
+ unsigned int rate = substream->runtime->rate;
unsigned int nsample_limit;
/* In bypass mode we don't need to calculate */
if (!dac33->fifo_mode)
return;
- /* Number of samples (16bit, stereo) in one period */
- dac33->nsample_min = snd_pcm_lib_period_bytes(substream) / 4;
-
- /* Number of samples (16bit, stereo) in ALSA buffer */
- dac33->nsample_max = snd_pcm_lib_buffer_bytes(substream) / 4;
- /* Subtract one period from the total */
- dac33->nsample_max -= dac33->nsample_min;
-
- /* Number of samples for LATENCY_TIME_MS / 2 */
- dac33->alarm_threshold = substream->runtime->rate /
- (1000 / (LATENCY_TIME_MS / 2));
-
- /* Find and fix up the lowest nsmaple limit */
- nsample_limit = substream->runtime->rate / (1000 / LATENCY_TIME_MS);
-
- if (dac33->nsample_min < nsample_limit)
- dac33->nsample_min = nsample_limit;
-
- if (dac33->nsample < dac33->nsample_min)
- dac33->nsample = dac33->nsample_min;
-
- /*
- * Find and fix up the highest nsmaple limit
- * In order to not overflow the DAC33 buffer substract the
- * alarm_threshold value from the size of the DAC33 buffer
- */
- nsample_limit = DAC33_BUFFER_SIZE_SAMPLES - dac33->alarm_threshold;
-
- if (dac33->nsample_max > nsample_limit)
- dac33->nsample_max = nsample_limit;
-
- if (dac33->nsample > dac33->nsample_max)
- dac33->nsample = dac33->nsample_max;
-
switch (dac33->fifo_mode) {
case DAC33_FIFO_MODE1:
+ /* Number of samples under i2c latency */
+ dac33->alarm_threshold = US_TO_SAMPLES(rate,
+ dac33->mode1_latency);
+ if (dac33->auto_fifo_config) {
+ if (period_size <= dac33->alarm_threshold)
+ /*
+ * Configure nSamaple to number of periods,
+ * which covers the latency requironment.
+ */
+ dac33->nsample = period_size *
+ ((dac33->alarm_threshold / period_size) +
+ (dac33->alarm_threshold % period_size ?
+ 1 : 0));
+ else
+ dac33->nsample = period_size;
+ } else {
+ /* nSample time shall not be shorter than i2c latency */
+ dac33->nsample_min = dac33->alarm_threshold;
+ /*
+ * nSample should not be bigger than alsa buffer minus
+ * size of one period to avoid overruns
+ */
+ dac33->nsample_max = substream->runtime->buffer_size -
+ period_size;
+ nsample_limit = DAC33_BUFFER_SIZE_SAMPLES -
+ dac33->alarm_threshold;
+ if (dac33->nsample_max > nsample_limit)
+ dac33->nsample_max = nsample_limit;
+
+ /* Correct the nSample if it is outside of the ranges */
+ if (dac33->nsample < dac33->nsample_min)
+ dac33->nsample = dac33->nsample_min;
+ if (dac33->nsample > dac33->nsample_max)
+ dac33->nsample = dac33->nsample_max;
+ }
+
dac33->mode1_us_burst = SAMPLES_TO_US(dac33->burst_rate,
dac33->nsample);
dac33->t_stamp1 = 0;
dac33->t_stamp2 = 0;
break;
case DAC33_FIFO_MODE7:
+ if (dac33->auto_fifo_config) {
+ dac33->uthr = UTHR_FROM_PERIOD_SIZE(
+ period_size,
+ rate,
+ dac33->burst_rate) + 9;
+ if (dac33->uthr > MODE7_UTHR)
+ dac33->uthr = MODE7_UTHR;
+ if (dac33->uthr < (MODE7_LTHR + 10))
+ dac33->uthr = (MODE7_LTHR + 10);
+ }
dac33->mode7_us_to_lthr =
- SAMPLES_TO_US(substream->runtime->rate,
- MODE7_UTHR - MODE7_LTHR + 1);
+ SAMPLES_TO_US(substream->runtime->rate,
+ dac33->uthr - MODE7_LTHR + 1);
dac33->t_stamp1 = 0;
break;
default:
@@ -1104,7 +1167,7 @@ static snd_pcm_sframes_t dac33_dai_delay(
struct snd_soc_codec *codec = socdev->card->codec;
struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
unsigned long long t0, t1, t_now;
- unsigned int time_delta;
+ unsigned int time_delta, uthr;
int samples_out, samples_in, samples;
snd_pcm_sframes_t delay = 0;
@@ -1182,6 +1245,7 @@ static snd_pcm_sframes_t dac33_dai_delay(
case DAC33_FIFO_MODE7:
spin_lock(&dac33->lock);
t0 = dac33->t_stamp1;
+ uthr = dac33->uthr;
spin_unlock(&dac33->lock);
t_now = ktime_to_us(ktime_get());
@@ -1194,7 +1258,7 @@ static snd_pcm_sframes_t dac33_dai_delay(
* Either the timestamps are messed or equal. Report
* maximum delay
*/
- delay = MODE7_UTHR;
+ delay = uthr;
goto out;
}
@@ -1208,8 +1272,8 @@ static snd_pcm_sframes_t dac33_dai_delay(
substream->runtime->rate,
time_delta);
- if (likely(MODE7_UTHR > samples_out))
- delay = MODE7_UTHR - samples_out;
+ if (likely(uthr > samples_out))
+ delay = uthr - samples_out;
else
delay = 0;
} else {
@@ -1227,8 +1291,8 @@ static snd_pcm_sframes_t dac33_dai_delay(
time_delta);
delay = MODE7_LTHR + samples_in - samples_out;
- if (unlikely(delay > MODE7_UTHR))
- delay = MODE7_UTHR;
+ if (unlikely(delay > uthr))
+ delay = uthr;
}
break;
default:
@@ -1347,10 +1411,15 @@ static int dac33_soc_probe(struct platform_device *pdev)
snd_soc_add_controls(codec, dac33_snd_controls,
ARRAY_SIZE(dac33_snd_controls));
- /* Only add the nSample controls, if we have valid IRQ number */
- if (dac33->irq >= 0)
- snd_soc_add_controls(codec, dac33_nsample_snd_controls,
- ARRAY_SIZE(dac33_nsample_snd_controls));
+ /* Only add the FIFO controls, if we have valid IRQ number */
+ if (dac33->irq >= 0) {
+ snd_soc_add_controls(codec, dac33_mode_snd_controls,
+ ARRAY_SIZE(dac33_mode_snd_controls));
+ /* FIFO usage controls only, if autoio config is not selected */
+ if (!dac33->auto_fifo_config)
+ snd_soc_add_controls(codec, dac33_fifo_snd_controls,
+ ARRAY_SIZE(dac33_fifo_snd_controls));
+ }
dac33_add_widgets(codec);
@@ -1481,9 +1550,14 @@ static int __devinit dac33_i2c_probe(struct i2c_client *client,
/* Pre calculate the burst rate */
dac33->burst_rate = BURST_BASEFREQ_HZ / dac33->burst_bclkdiv / 32;
dac33->keep_bclk = pdata->keep_bclk;
+ dac33->auto_fifo_config = pdata->auto_fifo_config;
+ dac33->mode1_latency = pdata->mode1_latency;
+ if (!dac33->mode1_latency)
+ dac33->mode1_latency = 10000; /* 10ms */
dac33->irq = client->irq;
dac33->nsample = NSAMPLE_MAX;
dac33->nsample_max = NSAMPLE_MAX;
+ dac33->uthr = MODE7_UTHR;
/* Disable FIFO use by default */
dac33->fifo_mode = DAC33_FIFO_BYPASS;