diff options
Diffstat (limited to 'sound/soc/codecs/sgtl5000.c')
| -rw-r--r-- | sound/soc/codecs/sgtl5000.c | 37 |
1 files changed, 22 insertions, 15 deletions
diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index 7e4066e131e..d15695d1c27 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -20,6 +20,7 @@ #include <linux/regulator/driver.h> #include <linux/regulator/machine.h> #include <linux/regulator/consumer.h> +#include <linux/of_device.h> #include <sound/core.h> #include <sound/tlv.h> #include <sound/pcm.h> @@ -130,16 +131,13 @@ static int mic_bias_event(struct snd_soc_dapm_widget *w, case SND_SOC_DAPM_POST_PMU: /* change mic bias resistor to 4Kohm */ snd_soc_update_bits(w->codec, SGTL5000_CHIP_MIC_CTRL, - SGTL5000_BIAS_R_4k, SGTL5000_BIAS_R_4k); + SGTL5000_BIAS_R_MASK, + SGTL5000_BIAS_R_4k << SGTL5000_BIAS_R_SHIFT); break; case SND_SOC_DAPM_PRE_PMD: - /* - * SGTL5000_BIAS_R_8k as mask to clean the two bits - * of mic bias and output impedance - */ snd_soc_update_bits(w->codec, SGTL5000_CHIP_MIC_CTRL, - SGTL5000_BIAS_R_8k, 0); + SGTL5000_BIAS_R_MASK, 0); break; } return 0; @@ -725,7 +723,9 @@ static int sgtl5000_pcm_hw_params(struct snd_pcm_substream *substream, return -EINVAL; } - snd_soc_update_bits(codec, SGTL5000_CHIP_I2S_CTRL, i2s_ctl, i2s_ctl); + snd_soc_update_bits(codec, SGTL5000_CHIP_I2S_CTRL, + SGTL5000_I2S_DLEN_MASK | SGTL5000_I2S_SCLKFREQ_MASK, + i2s_ctl); return 0; } @@ -756,7 +756,7 @@ static int ldo_regulator_enable(struct regulator_dev *dev) /* set voltage to register */ snd_soc_update_bits(codec, SGTL5000_CHIP_LINREG_CTRL, - (0x1 << 4) - 1, reg); + SGTL5000_LINREG_VDDD_MASK, reg); snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER, SGTL5000_LINEREG_D_POWERUP, @@ -782,7 +782,7 @@ static int ldo_regulator_disable(struct regulator_dev *dev) /* clear voltage info */ snd_soc_update_bits(codec, SGTL5000_CHIP_LINREG_CTRL, - (0x1 << 4) - 1, 0); + SGTL5000_LINREG_VDDD_MASK, 0); ldo->enabled = 0; @@ -808,6 +808,7 @@ static int ldo_regulator_register(struct snd_soc_codec *codec, int voltage) { struct ldo_regulator *ldo; + struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec); ldo = kzalloc(sizeof(struct ldo_regulator), GFP_KERNEL); @@ -842,6 +843,7 @@ static int ldo_regulator_register(struct snd_soc_codec *codec, return ret; } + sgtl5000->ldo = ldo; return 0; } @@ -1115,7 +1117,7 @@ static int sgtl5000_set_power_regs(struct snd_soc_codec *codec) /* set voltage to register */ snd_soc_update_bits(codec, SGTL5000_CHIP_LINREG_CTRL, - (0x1 << 4) - 1, 0x8); + SGTL5000_LINREG_VDDD_MASK, 0x8); /* * if vddd linear reg has been enabled, @@ -1146,8 +1148,7 @@ static int sgtl5000_set_power_regs(struct snd_soc_codec *codec) vag = (vag - SGTL5000_ANA_GND_BASE) / SGTL5000_ANA_GND_STP; snd_soc_update_bits(codec, SGTL5000_CHIP_REF_CTRL, - vag << SGTL5000_ANA_GND_SHIFT, - vag << SGTL5000_ANA_GND_SHIFT); + SGTL5000_ANA_GND_MASK, vag << SGTL5000_ANA_GND_SHIFT); /* set line out VAG to vddio / 2, in range (0.8v, 1.675v) */ vag = vddio / 2; @@ -1161,9 +1162,8 @@ static int sgtl5000_set_power_regs(struct snd_soc_codec *codec) SGTL5000_LINE_OUT_GND_STP; snd_soc_update_bits(codec, SGTL5000_CHIP_LINE_OUT_CTRL, - vag << SGTL5000_LINE_OUT_GND_SHIFT | - SGTL5000_LINE_OUT_CURRENT_360u << - SGTL5000_LINE_OUT_CURRENT_SHIFT, + SGTL5000_LINE_OUT_CURRENT_MASK | + SGTL5000_LINE_OUT_GND_MASK, vag << SGTL5000_LINE_OUT_GND_SHIFT | SGTL5000_LINE_OUT_CURRENT_360u << SGTL5000_LINE_OUT_CURRENT_SHIFT); @@ -1436,10 +1436,17 @@ static const struct i2c_device_id sgtl5000_id[] = { MODULE_DEVICE_TABLE(i2c, sgtl5000_id); +static const struct of_device_id sgtl5000_dt_ids[] = { + { .compatible = "fsl,sgtl5000", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, sgtl5000_dt_ids); + static struct i2c_driver sgtl5000_i2c_driver = { .driver = { .name = "sgtl5000", .owner = THIS_MODULE, + .of_match_table = sgtl5000_dt_ids, }, .probe = sgtl5000_i2c_probe, .remove = __devexit_p(sgtl5000_i2c_remove), |