diff options
Diffstat (limited to 'sound/soc/at91/at91-ssc.c')
| -rw-r--r-- | sound/soc/at91/at91-ssc.c | 791 |
1 files changed, 0 insertions, 791 deletions
diff --git a/sound/soc/at91/at91-ssc.c b/sound/soc/at91/at91-ssc.c deleted file mode 100644 index 1b61cc46126..00000000000 --- a/sound/soc/at91/at91-ssc.c +++ /dev/null @@ -1,791 +0,0 @@ -/* - * at91-ssc.c -- ALSA SoC AT91 SSC Audio Layer Platform driver - * - * Author: Frank Mandarino <fmandarino@endrelia.com> - * Endrelia Technologies Inc. - * - * Based on pxa2xx Platform drivers by - * Liam Girdwood <lrg@slimlogic.co.uk> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/device.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/atmel_pdc.h> - -#include <sound/core.h> -#include <sound/pcm.h> -#include <sound/pcm_params.h> -#include <sound/initval.h> -#include <sound/soc.h> - -#include <mach/hardware.h> -#include <mach/at91_pmc.h> -#include <mach/at91_ssc.h> - -#include "at91-pcm.h" -#include "at91-ssc.h" - -#if 0 -#define DBG(x...) printk(KERN_DEBUG "at91-ssc:" x) -#else -#define DBG(x...) -#endif - -#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20) -#define NUM_SSC_DEVICES 1 -#else -#define NUM_SSC_DEVICES 3 -#endif - - -/* - * SSC PDC registers required by the PCM DMA engine. - */ -static struct at91_pdc_regs pdc_tx_reg = { - .xpr = ATMEL_PDC_TPR, - .xcr = ATMEL_PDC_TCR, - .xnpr = ATMEL_PDC_TNPR, - .xncr = ATMEL_PDC_TNCR, -}; - -static struct at91_pdc_regs pdc_rx_reg = { - .xpr = ATMEL_PDC_RPR, - .xcr = ATMEL_PDC_RCR, - .xnpr = ATMEL_PDC_RNPR, - .xncr = ATMEL_PDC_RNCR, -}; - -/* - * SSC & PDC status bits for transmit and receive. - */ -static struct at91_ssc_mask ssc_tx_mask = { - .ssc_enable = AT91_SSC_TXEN, - .ssc_disable = AT91_SSC_TXDIS, - .ssc_endx = AT91_SSC_ENDTX, - .ssc_endbuf = AT91_SSC_TXBUFE, - .pdc_enable = ATMEL_PDC_TXTEN, - .pdc_disable = ATMEL_PDC_TXTDIS, -}; - -static struct at91_ssc_mask ssc_rx_mask = { - .ssc_enable = AT91_SSC_RXEN, - .ssc_disable = AT91_SSC_RXDIS, - .ssc_endx = AT91_SSC_ENDRX, - .ssc_endbuf = AT91_SSC_RXBUFF, - .pdc_enable = ATMEL_PDC_RXTEN, - .pdc_disable = ATMEL_PDC_RXTDIS, -}; - - -/* - * DMA parameters. - */ -static struct at91_pcm_dma_params ssc_dma_params[NUM_SSC_DEVICES][2] = { - {{ - .name = "SSC0 PCM out", - .pdc = &pdc_tx_reg, - .mask = &ssc_tx_mask, - }, - { - .name = "SSC0 PCM in", - .pdc = &pdc_rx_reg, - .mask = &ssc_rx_mask, - }}, -#if NUM_SSC_DEVICES == 3 - {{ - .name = "SSC1 PCM out", - .pdc = &pdc_tx_reg, - .mask = &ssc_tx_mask, - }, - { - .name = "SSC1 PCM in", - .pdc = &pdc_rx_reg, - .mask = &ssc_rx_mask, - }}, - {{ - .name = "SSC2 PCM out", - .pdc = &pdc_tx_reg, - .mask = &ssc_tx_mask, - }, - { - .name = "SSC2 PCM in", - .pdc = &pdc_rx_reg, - .mask = &ssc_rx_mask, - }}, -#endif -}; - -struct at91_ssc_state { - u32 ssc_cmr; - u32 ssc_rcmr; - u32 ssc_rfmr; - u32 ssc_tcmr; - u32 ssc_tfmr; - u32 ssc_sr; - u32 ssc_imr; -}; - -static struct at91_ssc_info { - char *name; - struct at91_ssc_periph ssc; - spinlock_t lock; /* lock for dir_mask */ - unsigned short dir_mask; /* 0=unused, 1=playback, 2=capture */ - unsigned short initialized; /* 1=SSC has been initialized */ - unsigned short daifmt; - unsigned short cmr_div; - unsigned short tcmr_period; - unsigned short rcmr_period; - struct at91_pcm_dma_params *dma_params[2]; - struct at91_ssc_state ssc_state; - -} ssc_info[NUM_SSC_DEVICES] = { - { - .name = "ssc0", - .lock = __SPIN_LOCK_UNLOCKED(ssc_info[0].lock), - .dir_mask = 0, - .initialized = 0, - }, -#if NUM_SSC_DEVICES == 3 - { - .name = "ssc1", - .lock = __SPIN_LOCK_UNLOCKED(ssc_info[1].lock), - .dir_mask = 0, - .initialized = 0, - }, - { - .name = "ssc2", - .lock = __SPIN_LOCK_UNLOCKED(ssc_info[2].lock), - .dir_mask = 0, - .initialized = 0, - }, -#endif -}; - -static unsigned int at91_ssc_sysclk; - -/* - * SSC interrupt handler. Passes PDC interrupts to the DMA - * interrupt handler in the PCM driver. - */ -static irqreturn_t at91_ssc_interrupt(int irq, void *dev_id) -{ - struct at91_ssc_info *ssc_p = dev_id; - struct at91_pcm_dma_params *dma_params; - u32 ssc_sr; - int i; - - ssc_sr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_SR) - & at91_ssc_read(ssc_p->ssc.base + AT91_SSC_IMR); - - /* - * Loop through the substreams attached to this SSC. If - * a DMA-related interrupt occurred on that substream, call - * the DMA interrupt handler function, if one has been - * registered in the dma_params structure by the PCM driver. - */ - for (i = 0; i < ARRAY_SIZE(ssc_p->dma_params); i++) { - dma_params = ssc_p->dma_params[i]; - - if (dma_params != NULL && dma_params->dma_intr_handler != NULL && - (ssc_sr & - (dma_params->mask->ssc_endx | dma_params->mask->ssc_endbuf))) - - dma_params->dma_intr_handler(ssc_sr, dma_params->substream); - } - - return IRQ_HANDLED; -} - -/* - * Startup. Only that one substream allowed in each direction. - */ -static int at91_ssc_startup(struct snd_pcm_substream *substream) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct at91_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; - int dir_mask; - - DBG("ssc_startup: SSC_SR=0x%08lx\n", - at91_ssc_read(ssc_p->ssc.base + AT91_SSC_SR)); - dir_mask = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0x1 : 0x2; - - spin_lock_irq(&ssc_p->lock); - if (ssc_p->dir_mask & dir_mask) { - spin_unlock_irq(&ssc_p->lock); - return -EBUSY; - } - ssc_p->dir_mask |= dir_mask; - spin_unlock_irq(&ssc_p->lock); - - return 0; -} - -/* - * Shutdown. Clear DMA parameters and shutdown the SSC if there - * are no other substreams open. - */ -static void at91_ssc_shutdown(struct snd_pcm_substream *substream) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct at91_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; - struct at91_pcm_dma_params *dma_params; - int dir, dir_mask; - - dir = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0 : 1; - dma_params = ssc_p->dma_params[dir]; - - if (dma_params != NULL) { - at91_ssc_write(dma_params->ssc_base + AT91_SSC_CR, - dma_params->mask->ssc_disable); - DBG("%s disabled SSC_SR=0x%08lx\n", (dir ? "receive" : "transmit"), - at91_ssc_read(ssc_p->ssc.base + AT91_SSC_SR)); - - dma_params->ssc_base = NULL; - dma_params->substream = NULL; - ssc_p->dma_params[dir] = NULL; - } - - dir_mask = 1 << dir; - - spin_lock_irq(&ssc_p->lock); - ssc_p->dir_mask &= ~dir_mask; - if (!ssc_p->dir_mask) { - /* Shutdown the SSC clock. */ - DBG("Stopping pid %d clock\n", ssc_p->ssc.pid); - at91_sys_write(AT91_PMC_PCDR, 1<<ssc_p->ssc.pid); - - if (ssc_p->initialized) { - free_irq(ssc_p->ssc.pid, ssc_p); - ssc_p->initialized = 0; - } - - /* Reset the SSC */ - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_CR, AT91_SSC_SWRST); - - /* Clear the SSC dividers */ - ssc_p->cmr_div = ssc_p->tcmr_period = ssc_p->rcmr_period = 0; - } - spin_unlock_irq(&ssc_p->lock); -} - -/* - * Record the SSC system clock rate. - */ -static int at91_ssc_set_dai_sysclk(struct snd_soc_dai *cpu_dai, - int clk_id, unsigned int freq, int dir) -{ - /* - * The only clock supplied to the SSC is the AT91 master clock, - * which is only used if the SSC is generating BCLK and/or - * LRC clocks. - */ - switch (clk_id) { - case AT91_SYSCLK_MCK: - at91_ssc_sysclk = freq; - break; - default: - return -EINVAL; - } - - return 0; -} - -/* - * Record the DAI format for use in hw_params(). - */ -static int at91_ssc_set_dai_fmt(struct snd_soc_dai *cpu_dai, - unsigned int fmt) -{ - struct at91_ssc_info *ssc_p = &ssc_info[cpu_dai->id]; - - ssc_p->daifmt = fmt; - return 0; -} - -/* - * Record SSC clock dividers for use in hw_params(). - */ -static int at91_ssc_set_dai_clkdiv(struct snd_soc_dai *cpu_dai, - int div_id, int div) -{ - struct at91_ssc_info *ssc_p = &ssc_info[cpu_dai->id]; - - switch (div_id) { - case AT91SSC_CMR_DIV: - /* - * The same master clock divider is used for both - * transmit and receive, so if a value has already - * been set, it must match this value. - */ - if (ssc_p->cmr_div == 0) - ssc_p->cmr_div = div; - else - if (div != ssc_p->cmr_div) - return -EBUSY; - break; - - case AT91SSC_TCMR_PERIOD: - ssc_p->tcmr_period = div; - break; - - case AT91SSC_RCMR_PERIOD: - ssc_p->rcmr_period = div; - break; - - default: - return -EINVAL; - } - - return 0; -} - -/* - * Configure the SSC. - */ -static int at91_ssc_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - int id = rtd->dai->cpu_dai->id; - struct at91_ssc_info *ssc_p = &ssc_info[id]; - struct at91_pcm_dma_params *dma_params; - int dir, channels, bits; - u32 tfmr, rfmr, tcmr, rcmr; - int start_event; - int ret; - - /* - * Currently, there is only one set of dma params for - * each direction. If more are added, this code will - * have to be changed to select the proper set. - */ - dir = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0 : 1; - - dma_params = &ssc_dma_params[id][dir]; - dma_params->ssc_base = ssc_p->ssc.base; - dma_params->substream = substream; - - ssc_p->dma_params[dir] = dma_params; - - /* - * The cpu_dai->dma_data field is only used to communicate the - * appropriate DMA parameters to the pcm driver hw_params() - * function. It should not be used for other purposes - * as it is common to all substreams. - */ - rtd->dai->cpu_dai->dma_data = dma_params; - - channels = params_channels(params); - - /* - * Determine sample size in bits and the PDC increment. - */ - switch(params_format(params)) { - case SNDRV_PCM_FORMAT_S8: - bits = 8; - dma_params->pdc_xfer_size = 1; - break; - case SNDRV_PCM_FORMAT_S16_LE: - bits = 16; - dma_params->pdc_xfer_size = 2; - break; - case SNDRV_PCM_FORMAT_S24_LE: - bits = 24; - dma_params->pdc_xfer_size = 4; - break; - case SNDRV_PCM_FORMAT_S32_LE: - bits = 32; - dma_params->pdc_xfer_size = 4; - break; - default: - printk(KERN_WARNING "at91-ssc: unsupported PCM format\n"); - return -EINVAL; - } - - /* - * The SSC only supports up to 16-bit samples in I2S format, due - * to the size of the Frame Mode Register FSLEN field. - */ - if ((ssc_p->daifmt & SND_SOC_DAIFMT_FORMAT_MASK) == SND_SOC_DAIFMT_I2S - && bits > 16) { - printk(KERN_WARNING - "at91-ssc: sample size %d is too large for I2S\n", bits); - return -EINVAL; - } - - /* - * Compute SSC register settings. - */ - switch (ssc_p->daifmt - & (SND_SOC_DAIFMT_FORMAT_MASK | SND_SOC_DAIFMT_MASTER_MASK)) { - - case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS: - /* - * I2S format, SSC provides BCLK and LRC clocks. - * - * The SSC transmit and receive clocks are generated from the - * MCK divider, and the BCLK signal is output on the SSC TK line. - */ - rcmr = (( ssc_p->rcmr_period << 24) & AT91_SSC_PERIOD) - | (( 1 << 16) & AT91_SSC_STTDLY) - | (( AT91_SSC_START_FALLING_RF ) & AT91_SSC_START) - | (( AT91_SSC_CK_RISING ) & AT91_SSC_CKI) - | (( AT91_SSC_CKO_NONE ) & AT91_SSC_CKO) - | (( AT91_SSC_CKS_DIV ) & AT91_SSC_CKS); - - rfmr = (( AT91_SSC_FSEDGE_POSITIVE ) & AT91_SSC_FSEDGE) - | (( AT91_SSC_FSOS_NEGATIVE ) & AT91_SSC_FSOS) - | (((bits - 1) << 16) & AT91_SSC_FSLEN) - | (((channels - 1) << 8) & AT91_SSC_DATNB) - | (( 1 << 7) & AT91_SSC_MSBF) - | (( 0 << 5) & AT91_SSC_LOOP) - | (((bits - 1) << 0) & AT91_SSC_DATALEN); - - tcmr = (( ssc_p->tcmr_period << 24) & AT91_SSC_PERIOD) - | (( 1 << 16) & AT91_SSC_STTDLY) - | (( AT91_SSC_START_FALLING_RF ) & AT91_SSC_START) - | (( AT91_SSC_CKI_FALLING ) & AT91_SSC_CKI) - | (( AT91_SSC_CKO_CONTINUOUS ) & AT91_SSC_CKO) - | (( AT91_SSC_CKS_DIV ) & AT91_SSC_CKS); - - tfmr = (( AT91_SSC_FSEDGE_POSITIVE ) & AT91_SSC_FSEDGE) - | (( 0 << 23) & AT91_SSC_FSDEN) - | (( AT91_SSC_FSOS_NEGATIVE ) & AT91_SSC_FSOS) - | (((bits - 1) << 16) & AT91_SSC_FSLEN) - | (((channels - 1) << 8) & AT91_SSC_DATNB) - | (( 1 << 7) & AT91_SSC_MSBF) - | (( 0 << 5) & AT91_SSC_DATDEF) - | (((bits - 1) << 0) & AT91_SSC_DATALEN); - break; - - case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM: - /* - * I2S format, CODEC supplies BCLK and LRC clocks. - * - * The SSC transmit clock is obtained from the BCLK signal on - * on the TK line, and the SSC receive clock is generated from the - * transmit clock. - * - * For single channel data, one sample is transferred on the falling - * edge of the LRC clock. For two channel data, one sample is - * transferred on both edges of the LRC clock. - */ - start_event = channels == 1 - ? AT91_SSC_START_FALLING_RF - : AT91_SSC_START_EDGE_RF; - - rcmr = (( 0 << 24) & AT91_SSC_PERIOD) - | (( 1 << 16) & AT91_SSC_STTDLY) - | (( start_event ) & AT91_SSC_START) - | (( AT91_SSC_CK_RISING ) & AT91_SSC_CKI) - | (( AT91_SSC_CKO_NONE ) & AT91_SSC_CKO) - | (( AT91_SSC_CKS_CLOCK ) & AT91_SSC_CKS); - - rfmr = (( AT91_SSC_FSEDGE_POSITIVE ) & AT91_SSC_FSEDGE) - | (( AT91_SSC_FSOS_NONE ) & AT91_SSC_FSOS) - | (( 0 << 16) & AT91_SSC_FSLEN) - | (( 0 << 8) & AT91_SSC_DATNB) - | (( 1 << 7) & AT91_SSC_MSBF) - | (( 0 << 5) & AT91_SSC_LOOP) - | (((bits - 1) << 0) & AT91_SSC_DATALEN); - - tcmr = (( 0 << 24) & AT91_SSC_PERIOD) - | (( 1 << 16) & AT91_SSC_STTDLY) - | (( start_event ) & AT91_SSC_START) - | (( AT91_SSC_CKI_FALLING ) & AT91_SSC_CKI) - | (( AT91_SSC_CKO_NONE ) & AT91_SSC_CKO) - | (( AT91_SSC_CKS_PIN ) & AT91_SSC_CKS); - - tfmr = (( AT91_SSC_FSEDGE_POSITIVE ) & AT91_SSC_FSEDGE) - | (( 0 << 23) & AT91_SSC_FSDEN) - | (( AT91_SSC_FSOS_NONE ) & AT91_SSC_FSOS) - | (( 0 << 16) & AT91_SSC_FSLEN) - | (( 0 << 8) & AT91_SSC_DATNB) - | (( 1 << 7) & AT91_SSC_MSBF) - | (( 0 << 5) & AT91_SSC_DATDEF) - | (((bits - 1) << 0) & AT91_SSC_DATALEN); - break; - - case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBS_CFS: - /* - * DSP/PCM Mode A format, SSC provides BCLK and LRC clocks. - * - * The SSC transmit and receive clocks are generated from the - * MCK divider, and the BCLK signal is output on the SSC TK line. - */ - rcmr = (( ssc_p->rcmr_period << 24) & AT91_SSC_PERIOD) - | (( 1 << 16) & AT91_SSC_STTDLY) - | (( AT91_SSC_START_RISING_RF ) & AT91_SSC_START) - | (( AT91_SSC_CK_RISING ) & AT91_SSC_CKI) - | (( AT91_SSC_CKO_NONE ) & AT91_SSC_CKO) - | (( AT91_SSC_CKS_DIV ) & AT91_SSC_CKS); - - rfmr = (( AT91_SSC_FSEDGE_POSITIVE ) & AT91_SSC_FSEDGE) - | (( AT91_SSC_FSOS_POSITIVE ) & AT91_SSC_FSOS) - | (( 0 << 16) & AT91_SSC_FSLEN) - | (((channels - 1) << 8) & AT91_SSC_DATNB) - | (( 1 << 7) & AT91_SSC_MSBF) - | (( 0 << 5) & AT91_SSC_LOOP) - | (((bits - 1) << 0) & AT91_SSC_DATALEN); - - tcmr = (( ssc_p->tcmr_period << 24) & AT91_SSC_PERIOD) - | (( 1 << 16) & AT91_SSC_STTDLY) - | (( AT91_SSC_START_RISING_RF ) & AT91_SSC_START) - | (( AT91_SSC_CK_RISING ) & AT91_SSC_CKI) - | (( AT91_SSC_CKO_CONTINUOUS ) & AT91_SSC_CKO) - | (( AT91_SSC_CKS_DIV ) & AT91_SSC_CKS); - - tfmr = (( AT91_SSC_FSEDGE_POSITIVE ) & AT91_SSC_FSEDGE) - | (( 0 << 23) & AT91_SSC_FSDEN) - | (( AT91_SSC_FSOS_POSITIVE ) & AT91_SSC_FSOS) - | (( 0 << 16) & AT91_SSC_FSLEN) - | (((channels - 1) << 8) & AT91_SSC_DATNB) - | (( 1 << 7) & AT91_SSC_MSBF) - | (( 0 << 5) & AT91_SSC_DATDEF) - | (((bits - 1) << 0) & AT91_SSC_DATALEN); - - - - break; - - case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBM_CFM: - default: - printk(KERN_WARNING "at91-ssc: unsupported DAI format 0x%x.\n", - ssc_p->daifmt); - return -EINVAL; - break; - } - DBG("RCMR=%08x RFMR=%08x TCMR=%08x TFMR=%08x\n", rcmr, rfmr, tcmr, tfmr); - - if (!ssc_p->initialized) { - - /* Enable PMC peripheral clock for this SSC */ - DBG("Starting pid %d clock\n", ssc_p->ssc.pid); - at91_sys_write(AT91_PMC_PCER, 1<<ssc_p->ssc.pid); - - /* Reset the SSC and its PDC registers */ - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_CR, AT91_SSC_SWRST); - - at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_RPR, 0); - at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_RCR, 0); - at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_RNPR, 0); - at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_RNCR, 0); - at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_TPR, 0); - at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_TCR, 0); - at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_TNPR, 0); - at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_TNCR, 0); - - if ((ret = request_irq(ssc_p->ssc.pid, at91_ssc_interrupt, - 0, ssc_p->name, ssc_p)) < 0) { - printk(KERN_WARNING "at91-ssc: request_irq failure\n"); - - DBG("Stopping pid %d clock\n", ssc_p->ssc.pid); - at91_sys_write(AT91_PMC_PCDR, 1<<ssc_p->ssc.pid); - return ret; - } - - ssc_p->initialized = 1; - } - - /* set SSC clock mode register */ - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_CMR, ssc_p->cmr_div); - - /* set receive clock mode and format */ - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_RCMR, rcmr); - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_RFMR, rfmr); - - /* set transmit clock mode and format */ - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_TCMR, tcmr); - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_TFMR, tfmr); - - DBG("hw_params: SSC initialized\n"); - return 0; -} - - -static int at91_ssc_prepare(struct snd_pcm_substream *substream) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct at91_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; - struct at91_pcm_dma_params *dma_params; - int dir; - - dir = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0 : 1; - dma_params = ssc_p->dma_params[dir]; - - at91_ssc_write(dma_params->ssc_base + AT91_SSC_CR, - dma_params->mask->ssc_enable); - - DBG("%s enabled SSC_SR=0x%08lx\n", dir ? "receive" : "transmit", - at91_ssc_read(dma_params->ssc_base + AT91_SSC_SR)); - return 0; -} - - -#ifdef CONFIG_PM -static int at91_ssc_suspend(struct platform_device *pdev, - struct snd_soc_dai *cpu_dai) -{ - struct at91_ssc_info *ssc_p; - - if(!cpu_dai->active) - return 0; - - ssc_p = &ssc_info[cpu_dai->id]; - - /* Save the status register before disabling transmit and receive. */ - ssc_p->ssc_state.ssc_sr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_SR); - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_CR, - AT91_SSC_TXDIS | AT91_SSC_RXDIS); - - /* Save the current interrupt mask, then disable unmasked interrupts. */ - ssc_p->ssc_state.ssc_imr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_IMR); - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_IDR, ssc_p->ssc_state.ssc_imr); - - ssc_p->ssc_state.ssc_cmr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_CMR); - ssc_p->ssc_state.ssc_rcmr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_RCMR); - ssc_p->ssc_state.ssc_rfmr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_RFMR); - ssc_p->ssc_state.ssc_tcmr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_TCMR); - ssc_p->ssc_state.ssc_tfmr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_TFMR); - - return 0; -} - -static int at91_ssc_resume(struct platform_device *pdev, - struct snd_soc_dai *cpu_dai) -{ - struct at91_ssc_info *ssc_p; - - if(!cpu_dai->active) - return 0; - - ssc_p = &ssc_info[cpu_dai->id]; - - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_TFMR, ssc_p->ssc_state.ssc_tfmr); - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_TCMR, ssc_p->ssc_state.ssc_tcmr); - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_RFMR, ssc_p->ssc_state.ssc_rfmr); - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_RCMR, ssc_p->ssc_state.ssc_rcmr); - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_CMR, ssc_p->ssc_state.ssc_cmr); - - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_IER, ssc_p->ssc_state.ssc_imr); - - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_CR, - ((ssc_p->ssc_state.ssc_sr & AT91_SSC_RXENA) ? AT91_SSC_RXEN : 0) | - ((ssc_p->ssc_state.ssc_sr & AT91_SSC_TXENA) ? AT91_SSC_TXEN : 0)); - - return 0; -} - -#else -#define at91_ssc_suspend NULL -#define at91_ssc_resume NULL -#endif - -#define AT91_SSC_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\ - SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |\ - SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |\ - SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 |\ - SNDRV_PCM_RATE_96000) - -#define AT91_SSC_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE |\ - SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) - -struct snd_soc_dai at91_ssc_dai[NUM_SSC_DEVICES] = { - { .name = "at91-ssc0", - .id = 0, - .type = SND_SOC_DAI_PCM, - .suspend = at91_ssc_suspend, - .resume = at91_ssc_resume, - .playback = { - .channels_min = 1, - .channels_max = 2, - .rates = AT91_SSC_RATES, - .formats = AT91_SSC_FORMATS,}, - .capture = { - .channels_min = 1, - .channels_max = 2, - .rates = AT91_SSC_RATES, - .formats = AT91_SSC_FORMATS,}, - .ops = { - .startup = at91_ssc_startup, - .shutdown = at91_ssc_shutdown, - .prepare = at91_ssc_prepare, - .hw_params = at91_ssc_hw_params,}, - .dai_ops = { - .set_sysclk = at91_ssc_set_dai_sysclk, - .set_fmt = at91_ssc_set_dai_fmt, - .set_clkdiv = at91_ssc_set_dai_clkdiv,}, - .private_data = &ssc_info[0].ssc, - }, -#if NUM_SSC_DEVICES == 3 - { .name = "at91-ssc1", - .id = 1, - .type = SND_SOC_DAI_PCM, - .suspend = at91_ssc_suspend, - .resume = at91_ssc_resume, - .playback = { - .channels_min = 1, - .channels_max = 2, - .rates = AT91_SSC_RATES, - .formats = AT91_SSC_FORMATS,}, - .capture = { - .channels_min = 1, - .channels_max = 2, - .rates = AT91_SSC_RATES, - .formats = AT91_SSC_FORMATS,}, - .ops = { - .startup = at91_ssc_startup, - .shutdown = at91_ssc_shutdown, - .prepare = at91_ssc_prepare, - .hw_params = at91_ssc_hw_params,}, - .dai_ops = { - .set_sysclk = at91_ssc_set_dai_sysclk, - .set_fmt = at91_ssc_set_dai_fmt, - .set_clkdiv = at91_ssc_set_dai_clkdiv,}, - .private_data = &ssc_info[1].ssc, - }, - { .name = "at91-ssc2", - .id = 2, - .type = SND_SOC_DAI_PCM, - .suspend = at91_ssc_suspend, - .resume = at91_ssc_resume, - .playback = { - .channels_min = 1, - .channels_max = 2, - .rates = AT91_SSC_RATES, - .formats = AT91_SSC_FORMATS,}, - .capture = { - .channels_min = 1, - .channels_max = 2, - .rates = AT91_SSC_RATES, - .formats = AT91_SSC_FORMATS,}, - .ops = { - .startup = at91_ssc_startup, - .shutdown = at91_ssc_shutdown, - .prepare = at91_ssc_prepare, - .hw_params = at91_ssc_hw_params,}, - .dai_ops = { - .set_sysclk = at91_ssc_set_dai_sysclk, - .set_fmt = at91_ssc_set_dai_fmt, - .set_clkdiv = at91_ssc_set_dai_clkdiv,}, - .private_data = &ssc_info[2].ssc, - }, -#endif -}; - -EXPORT_SYMBOL_GPL(at91_ssc_dai); - -/* Module information */ -MODULE_AUTHOR("Frank Mandarino, fmandarino@endrelia.com, www.endrelia.com"); -MODULE_DESCRIPTION("AT91 SSC ASoC Interface"); -MODULE_LICENSE("GPL"); |