diff options
Diffstat (limited to 'sound/soc/at32/at32-ssc.c')
| -rw-r--r-- | sound/soc/at32/at32-ssc.c | 849 |
1 files changed, 0 insertions, 849 deletions
diff --git a/sound/soc/at32/at32-ssc.c b/sound/soc/at32/at32-ssc.c deleted file mode 100644 index 4ef6492c902..00000000000 --- a/sound/soc/at32/at32-ssc.c +++ /dev/null @@ -1,849 +0,0 @@ -/* sound/soc/at32/at32-ssc.c - * ASoC platform driver for AT32 using SSC as DAI - * - * Copyright (C) 2008 Long Range Systems - * Geoffrey Wossum <gwossum@acm.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Note that this is basically a port of the sound/soc/at91-ssc.c to - * the AVR32 kernel. Thanks to Frank Mandarino for that code. - */ - -/* #define DEBUG */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/device.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/atmel_pdc.h> -#include <linux/atmel-ssc.h> - -#include <sound/core.h> -#include <sound/pcm.h> -#include <sound/pcm_params.h> -#include <sound/initval.h> -#include <sound/soc.h> - -#include "at32-pcm.h" -#include "at32-ssc.h" - - - -/*-------------------------------------------------------------------------*\ - * Constants -\*-------------------------------------------------------------------------*/ -#define NUM_SSC_DEVICES 3 - -/* - * SSC direction masks - */ -#define SSC_DIR_MASK_UNUSED 0 -#define SSC_DIR_MASK_PLAYBACK 1 -#define SSC_DIR_MASK_CAPTURE 2 - -/* - * SSC register values that Atmel left out of <linux/atmel-ssc.h>. These - * are expected to be used with SSC_BF - */ -/* START bit field values */ -#define SSC_START_CONTINUOUS 0 -#define SSC_START_TX_RX 1 -#define SSC_START_LOW_RF 2 -#define SSC_START_HIGH_RF 3 -#define SSC_START_FALLING_RF 4 -#define SSC_START_RISING_RF 5 -#define SSC_START_LEVEL_RF 6 -#define SSC_START_EDGE_RF 7 -#define SSS_START_COMPARE_0 8 - -/* CKI bit field values */ -#define SSC_CKI_FALLING 0 -#define SSC_CKI_RISING 1 - -/* CKO bit field values */ -#define SSC_CKO_NONE 0 -#define SSC_CKO_CONTINUOUS 1 -#define SSC_CKO_TRANSFER 2 - -/* CKS bit field values */ -#define SSC_CKS_DIV 0 -#define SSC_CKS_CLOCK 1 -#define SSC_CKS_PIN 2 - -/* FSEDGE bit field values */ -#define SSC_FSEDGE_POSITIVE 0 -#define SSC_FSEDGE_NEGATIVE 1 - -/* FSOS bit field values */ -#define SSC_FSOS_NONE 0 -#define SSC_FSOS_NEGATIVE 1 -#define SSC_FSOS_POSITIVE 2 -#define SSC_FSOS_LOW 3 -#define SSC_FSOS_HIGH 4 -#define SSC_FSOS_TOGGLE 5 - -#define START_DELAY 1 - - - -/*-------------------------------------------------------------------------*\ - * Module data -\*-------------------------------------------------------------------------*/ -/* - * SSC PDC registered required by the PCM DMA engine - */ -static struct at32_pdc_regs pdc_tx_reg = { - .xpr = SSC_PDC_TPR, - .xcr = SSC_PDC_TCR, - .xnpr = SSC_PDC_TNPR, - .xncr = SSC_PDC_TNCR, -}; - - - -static struct at32_pdc_regs pdc_rx_reg = { - .xpr = SSC_PDC_RPR, - .xcr = SSC_PDC_RCR, - .xnpr = SSC_PDC_RNPR, - .xncr = SSC_PDC_RNCR, -}; - - - -/* - * SSC and PDC status bits for transmit and receive - */ -static struct at32_ssc_mask ssc_tx_mask = { - .ssc_enable = SSC_BIT(CR_TXEN), - .ssc_disable = SSC_BIT(CR_TXDIS), - .ssc_endx = SSC_BIT(SR_ENDTX), - .ssc_endbuf = SSC_BIT(SR_TXBUFE), - .pdc_enable = SSC_BIT(PDC_PTCR_TXTEN), - .pdc_disable = SSC_BIT(PDC_PTCR_TXTDIS), -}; - - - -static struct at32_ssc_mask ssc_rx_mask = { - .ssc_enable = SSC_BIT(CR_RXEN), - .ssc_disable = SSC_BIT(CR_RXDIS), - .ssc_endx = SSC_BIT(SR_ENDRX), - .ssc_endbuf = SSC_BIT(SR_RXBUFF), - .pdc_enable = SSC_BIT(PDC_PTCR_RXTEN), - .pdc_disable = SSC_BIT(PDC_PTCR_RXTDIS), -}; - - - -/* - * DMA parameters for each SSC - */ -static struct at32_pcm_dma_params ssc_dma_params[NUM_SSC_DEVICES][2] = { - { - { - .name = "SSC0 PCM out", - .pdc = &pdc_tx_reg, - .mask = &ssc_tx_mask, - }, - { - .name = "SSC0 PCM in", - .pdc = &pdc_rx_reg, - .mask = &ssc_rx_mask, - }, - }, - { - { - .name = "SSC1 PCM out", - .pdc = &pdc_tx_reg, - .mask = &ssc_tx_mask, - }, - { - .name = "SSC1 PCM in", - .pdc = &pdc_rx_reg, - .mask = &ssc_rx_mask, - }, - }, - { - { - .name = "SSC2 PCM out", - .pdc = &pdc_tx_reg, - .mask = &ssc_tx_mask, - }, - { - .name = "SSC2 PCM in", - .pdc = &pdc_rx_reg, - .mask = &ssc_rx_mask, - }, - }, -}; - - - -static struct at32_ssc_info ssc_info[NUM_SSC_DEVICES] = { - { - .name = "ssc0", - .lock = __SPIN_LOCK_UNLOCKED(ssc_info[0].lock), - .dir_mask = SSC_DIR_MASK_UNUSED, - .initialized = 0, - }, - { - .name = "ssc1", - .lock = __SPIN_LOCK_UNLOCKED(ssc_info[1].lock), - .dir_mask = SSC_DIR_MASK_UNUSED, - .initialized = 0, - }, - { - .name = "ssc2", - .lock = __SPIN_LOCK_UNLOCKED(ssc_info[2].lock), - .dir_mask = SSC_DIR_MASK_UNUSED, - .initialized = 0, - }, -}; - - - - -/*-------------------------------------------------------------------------*\ - * ISR -\*-------------------------------------------------------------------------*/ -/* - * SSC interrupt handler. Passes PDC interrupts to the DMA interrupt - * handler in the PCM driver. - */ -static irqreturn_t at32_ssc_interrupt(int irq, void *dev_id) -{ - struct at32_ssc_info *ssc_p = dev_id; - struct at32_pcm_dma_params *dma_params; - u32 ssc_sr; - u32 ssc_substream_mask; - int i; - - ssc_sr = (ssc_readl(ssc_p->ssc->regs, SR) & - ssc_readl(ssc_p->ssc->regs, IMR)); - - /* - * Loop through substreams attached to this SSC. If a DMA-related - * interrupt occured on that substream, call the DMA interrupt - * handler function, if one has been registered in the dma_param - * structure by the PCM driver. - */ - for (i = 0; i < ARRAY_SIZE(ssc_p->dma_params); i++) { - dma_params = ssc_p->dma_params[i]; - - if ((dma_params != NULL) && - (dma_params->dma_intr_handler != NULL)) { - ssc_substream_mask = (dma_params->mask->ssc_endx | - dma_params->mask->ssc_endbuf); - if (ssc_sr & ssc_substream_mask) { - dma_params->dma_intr_handler(ssc_sr, - dma_params-> - substream); - } - } - } - - - return IRQ_HANDLED; -} - -/*-------------------------------------------------------------------------*\ - * DAI functions -\*-------------------------------------------------------------------------*/ -/* - * Startup. Only that one substream allowed in each direction. - */ -static int at32_ssc_startup(struct snd_pcm_substream *substream) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct at32_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; - int dir_mask; - - dir_mask = ((substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ? - SSC_DIR_MASK_PLAYBACK : SSC_DIR_MASK_CAPTURE); - - spin_lock_irq(&ssc_p->lock); - if (ssc_p->dir_mask & dir_mask) { - spin_unlock_irq(&ssc_p->lock); - return -EBUSY; - } - ssc_p->dir_mask |= dir_mask; - spin_unlock_irq(&ssc_p->lock); - - return 0; -} - - - -/* - * Shutdown. Clear DMA parameters and shutdown the SSC if there - * are no other substreams open. - */ -static void at32_ssc_shutdown(struct snd_pcm_substream *substream) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct at32_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; - struct at32_pcm_dma_params *dma_params; - int dir_mask; - - dma_params = ssc_p->dma_params[substream->stream]; - - if (dma_params != NULL) { - ssc_writel(dma_params->ssc->regs, CR, - dma_params->mask->ssc_disable); - pr_debug("%s disabled SSC_SR=0x%08x\n", - (substream->stream ? "receiver" : "transmit"), - ssc_readl(ssc_p->ssc->regs, SR)); - - dma_params->ssc = NULL; - dma_params->substream = NULL; - ssc_p->dma_params[substream->stream] = NULL; - } - - - dir_mask = 1 << substream->stream; - spin_lock_irq(&ssc_p->lock); - ssc_p->dir_mask &= ~dir_mask; - if (!ssc_p->dir_mask) { - /* Shutdown the SSC clock */ - pr_debug("at32-ssc: Stopping user %d clock\n", - ssc_p->ssc->user); - clk_disable(ssc_p->ssc->clk); - - if (ssc_p->initialized) { - free_irq(ssc_p->ssc->irq, ssc_p); - ssc_p->initialized = 0; - } - - /* Reset the SSC */ - ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST)); - - /* clear the SSC dividers */ - ssc_p->cmr_div = 0; - ssc_p->tcmr_period = 0; - ssc_p->rcmr_period = 0; - } - spin_unlock_irq(&ssc_p->lock); -} - - - -/* - * Set the SSC system clock rate - */ -static int at32_ssc_set_dai_sysclk(struct snd_soc_dai *cpu_dai, - int clk_id, unsigned int freq, int dir) -{ - /* TODO: What the heck do I do here? */ - return 0; -} - - - -/* - * Record DAI format for use by hw_params() - */ -static int at32_ssc_set_dai_fmt(struct snd_soc_dai *cpu_dai, - unsigned int fmt) -{ - struct at32_ssc_info *ssc_p = &ssc_info[cpu_dai->id]; - - ssc_p->daifmt = fmt; - return 0; -} - - - -/* - * Record SSC clock dividers for use in hw_params() - */ -static int at32_ssc_set_dai_clkdiv(struct snd_soc_dai *cpu_dai, - int div_id, int div) -{ - struct at32_ssc_info *ssc_p = &ssc_info[cpu_dai->id]; - - switch (div_id) { - case AT32_SSC_CMR_DIV: - /* - * The same master clock divider is used for both - * transmit and receive, so if a value has already - * been set, it must match this value - */ - if (ssc_p->cmr_div == 0) - ssc_p->cmr_div = div; - else if (div != ssc_p->cmr_div) - return -EBUSY; - break; - - case AT32_SSC_TCMR_PERIOD: - ssc_p->tcmr_period = div; - break; - - case AT32_SSC_RCMR_PERIOD: - ssc_p->rcmr_period = div; - break; - - default: - return -EINVAL; - } - - return 0; -} - - - -/* - * Configure the SSC - */ -static int at32_ssc_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - int id = rtd->dai->cpu_dai->id; - struct at32_ssc_info *ssc_p = &ssc_info[id]; - struct at32_pcm_dma_params *dma_params; - int channels, bits; - u32 tfmr, rfmr, tcmr, rcmr; - int start_event; - int ret; - - - /* - * Currently, there is only one set of dma_params for each direction. - * If more are added, this code will have to be changed to select - * the proper set - */ - dma_params = &ssc_dma_params[id][substream->stream]; - dma_params->ssc = ssc_p->ssc; - dma_params->substream = substream; - - ssc_p->dma_params[substream->stream] = dma_params; - - - /* - * The cpu_dai->dma_data field is only used to communicate the - * appropriate DMA parameters to the PCM driver's hw_params() - * function. It should not be used for other purposes as it - * is common to all substreams. - */ - rtd->dai->cpu_dai->dma_data = dma_params; - - channels = params_channels(params); - - - /* - * Determine sample size in bits and the PDC increment - */ - switch (params_format(params)) { - case SNDRV_PCM_FORMAT_S8: - bits = 8; - dma_params->pdc_xfer_size = 1; - break; - - case SNDRV_PCM_FORMAT_S16: - bits = 16; - dma_params->pdc_xfer_size = 2; - break; - - case SNDRV_PCM_FORMAT_S24: - bits = 24; - dma_params->pdc_xfer_size = 4; - break; - - case SNDRV_PCM_FORMAT_S32: - bits = 32; - dma_params->pdc_xfer_size = 4; - break; - - default: - pr_warning("at32-ssc: Unsupported PCM format %d", - params_format(params)); - return -EINVAL; - } - pr_debug("at32-ssc: bits = %d, pdc_xfer_size = %d, channels = %d\n", - bits, dma_params->pdc_xfer_size, channels); - - - /* - * The SSC only supports up to 16-bit samples in I2S format, due - * to the size of the Frame Mode Register FSLEN field. - */ - if ((ssc_p->daifmt & SND_SOC_DAIFMT_FORMAT_MASK) == SND_SOC_DAIFMT_I2S) - if (bits > 16) { - pr_warning("at32-ssc: " - "sample size %d is too large for I2S\n", - bits); - return -EINVAL; - } - - - /* - * Compute the SSC register settings - */ - switch (ssc_p->daifmt & (SND_SOC_DAIFMT_FORMAT_MASK | - SND_SOC_DAIFMT_MASTER_MASK)) { - case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS: - /* - * I2S format, SSC provides BCLK and LRS clocks. - * - * The SSC transmit and receive clocks are generated from the - * MCK divider, and the BCLK signal is output on the SSC TK line - */ - pr_debug("at32-ssc: SSC mode is I2S BCLK / FRAME master\n"); - rcmr = (SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period) | - SSC_BF(RCMR_STTDLY, START_DELAY) | - SSC_BF(RCMR_START, SSC_START_FALLING_RF) | - SSC_BF(RCMR_CKI, SSC_CKI_RISING) | - SSC_BF(RCMR_CKO, SSC_CKO_NONE) | - SSC_BF(RCMR_CKS, SSC_CKS_DIV)); - - rfmr = (SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) | - SSC_BF(RFMR_FSOS, SSC_FSOS_NEGATIVE) | - SSC_BF(RFMR_FSLEN, bits - 1) | - SSC_BF(RFMR_DATNB, channels - 1) | - SSC_BIT(RFMR_MSBF) | SSC_BF(RFMR_DATLEN, bits - 1)); - - tcmr = (SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period) | - SSC_BF(TCMR_STTDLY, START_DELAY) | - SSC_BF(TCMR_START, SSC_START_FALLING_RF) | - SSC_BF(TCMR_CKI, SSC_CKI_FALLING) | - SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS) | - SSC_BF(TCMR_CKS, SSC_CKS_DIV)); - - tfmr = (SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) | - SSC_BF(TFMR_FSOS, SSC_FSOS_NEGATIVE) | - SSC_BF(TFMR_FSLEN, bits - 1) | - SSC_BF(TFMR_DATNB, channels - 1) | SSC_BIT(TFMR_MSBF) | - SSC_BF(TFMR_DATLEN, bits - 1)); - break; - - - case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM: - /* - * I2S format, CODEC supplies BCLK and LRC clock. - * - * The SSC transmit clock is obtained from the BCLK signal - * on the TK line, and the SSC receive clock is generated from - * the transmit clock. - * - * For single channel data, one sample is transferred on the - * falling edge of the LRC clock. For two channel data, one - * sample is transferred on both edges of the LRC clock. - */ - pr_debug("at32-ssc: SSC mode is I2S BCLK / FRAME slave\n"); - start_event = ((channels == 1) ? - SSC_START_FALLING_RF : SSC_START_EDGE_RF); - - rcmr = (SSC_BF(RCMR_STTDLY, START_DELAY) | - SSC_BF(RCMR_START, start_event) | - SSC_BF(RCMR_CKI, SSC_CKI_RISING) | - SSC_BF(RCMR_CKO, SSC_CKO_NONE) | - SSC_BF(RCMR_CKS, SSC_CKS_CLOCK)); - - rfmr = (SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) | - SSC_BF(RFMR_FSOS, SSC_FSOS_NONE) | - SSC_BIT(RFMR_MSBF) | SSC_BF(RFMR_DATLEN, bits - 1)); - - tcmr = (SSC_BF(TCMR_STTDLY, START_DELAY) | - SSC_BF(TCMR_START, start_event) | - SSC_BF(TCMR_CKI, SSC_CKI_FALLING) | - SSC_BF(TCMR_CKO, SSC_CKO_NONE) | - SSC_BF(TCMR_CKS, SSC_CKS_PIN)); - - tfmr = (SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) | - SSC_BF(TFMR_FSOS, SSC_FSOS_NONE) | - SSC_BIT(TFMR_MSBF) | SSC_BF(TFMR_DATLEN, bits - 1)); - break; - - - case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBS_CFS: - /* - * DSP/PCM Mode A format, SSC provides BCLK and LRC clocks. - * - * The SSC transmit and receive clocks are generated from the - * MCK divider, and the BCLK signal is output on the SSC TK line - */ - pr_debug("at32-ssc: SSC mode is DSP A BCLK / FRAME master\n"); - rcmr = (SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period) | - SSC_BF(RCMR_STTDLY, 1) | - SSC_BF(RCMR_START, SSC_START_RISING_RF) | - SSC_BF(RCMR_CKI, SSC_CKI_RISING) | - SSC_BF(RCMR_CKO, SSC_CKO_NONE) | - SSC_BF(RCMR_CKS, SSC_CKS_DIV)); - - rfmr = (SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) | - SSC_BF(RFMR_FSOS, SSC_FSOS_POSITIVE) | - SSC_BF(RFMR_DATNB, channels - 1) | - SSC_BIT(RFMR_MSBF) | SSC_BF(RFMR_DATLEN, bits - 1)); - - tcmr = (SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period) | - SSC_BF(TCMR_STTDLY, 1) | - SSC_BF(TCMR_START, SSC_START_RISING_RF) | - SSC_BF(TCMR_CKI, SSC_CKI_RISING) | - SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS) | - SSC_BF(TCMR_CKS, SSC_CKS_DIV)); - - tfmr = (SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) | - SSC_BF(TFMR_FSOS, SSC_FSOS_POSITIVE) | - SSC_BF(TFMR_DATNB, channels - 1) | - SSC_BIT(TFMR_MSBF) | SSC_BF(TFMR_DATLEN, bits - 1)); - break; - - - case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBM_CFM: - default: - pr_warning("at32-ssc: unsupported DAI format 0x%x\n", - ssc_p->daifmt); - return -EINVAL; - break; - } - pr_debug("at32-ssc: RCMR=%08x RFMR=%08x TCMR=%08x TFMR=%08x\n", - rcmr, rfmr, tcmr, tfmr); - - - if (!ssc_p->initialized) { - /* enable peripheral clock */ - pr_debug("at32-ssc: Starting clock\n"); - clk_enable(ssc_p->ssc->clk); - - /* Reset the SSC and its PDC registers */ - ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST)); - - ssc_writel(ssc_p->ssc->regs, PDC_RPR, 0); - ssc_writel(ssc_p->ssc->regs, PDC_RCR, 0); - ssc_writel(ssc_p->ssc->regs, PDC_RNPR, 0); - ssc_writel(ssc_p->ssc->regs, PDC_RNCR, 0); - - ssc_writel(ssc_p->ssc->regs, PDC_TPR, 0); - ssc_writel(ssc_p->ssc->regs, PDC_TCR, 0); - ssc_writel(ssc_p->ssc->regs, PDC_TNPR, 0); - ssc_writel(ssc_p->ssc->regs, PDC_TNCR, 0); - - ret = request_irq(ssc_p->ssc->irq, at32_ssc_interrupt, 0, - ssc_p->name, ssc_p); - if (ret < 0) { - pr_warning("at32-ssc: request irq failed (%d)\n", ret); - pr_debug("at32-ssc: Stopping clock\n"); - clk_disable(ssc_p->ssc->clk); - return ret; - } - - ssc_p->initialized = 1; - } - - /* Set SSC clock mode register */ - ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->cmr_div); - - /* set receive clock mode and format */ - ssc_writel(ssc_p->ssc->regs, RCMR, rcmr); - ssc_writel(ssc_p->ssc->regs, RFMR, rfmr); - - /* set transmit clock mode and format */ - ssc_writel(ssc_p->ssc->regs, TCMR, tcmr); - ssc_writel(ssc_p->ssc->regs, TFMR, tfmr); - - pr_debug("at32-ssc: SSC initialized\n"); - return 0; -} - - - -static int at32_ssc_prepare(struct snd_pcm_substream *substream) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct at32_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; - struct at32_pcm_dma_params *dma_params; - - dma_params = ssc_p->dma_params[substream->stream]; - - ssc_writel(dma_params->ssc->regs, CR, dma_params->mask->ssc_enable); - - return 0; -} - - - -#ifdef CONFIG_PM -static int at32_ssc_suspend(struct platform_device *pdev, - struct snd_soc_dai *cpu_dai) -{ - struct at32_ssc_info *ssc_p; - - if (!cpu_dai->active) - return 0; - - ssc_p = &ssc_info[cpu_dai->id]; - - /* Save the status register before disabling transmit and receive */ - ssc_p->ssc_state.ssc_sr = ssc_readl(ssc_p->ssc->regs, SR); - ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_TXDIS) | SSC_BIT(CR_RXDIS)); - - /* Save the current interrupt mask, then disable unmasked interrupts */ - ssc_p->ssc_state.ssc_imr = ssc_readl(ssc_p->ssc->regs, IMR); - ssc_writel(ssc_p->ssc->regs, IDR, ssc_p->ssc_state.ssc_imr); - - ssc_p->ssc_state.ssc_cmr = ssc_readl(ssc_p->ssc->regs, CMR); - ssc_p->ssc_state.ssc_rcmr = ssc_readl(ssc_p->ssc->regs, RCMR); - ssc_p->ssc_state.ssc_rfmr = ssc_readl(ssc_p->ssc->regs, RFMR); - ssc_p->ssc_state.ssc_tcmr = ssc_readl(ssc_p->ssc->regs, TCMR); - ssc_p->ssc_state.ssc_tfmr = ssc_readl(ssc_p->ssc->regs, TFMR); - - return 0; -} - - - -static int at32_ssc_resume(struct platform_device *pdev, - struct snd_soc_dai *cpu_dai) -{ - struct at32_ssc_info *ssc_p; - u32 cr; - - if (!cpu_dai->active) - return 0; - - ssc_p = &ssc_info[cpu_dai->id]; - - /* restore SSC register settings */ - ssc_writel(ssc_p->ssc->regs, TFMR, ssc_p->ssc_state.ssc_tfmr); - ssc_writel(ssc_p->ssc->regs, TCMR, ssc_p->ssc_state.ssc_tcmr); - ssc_writel(ssc_p->ssc->regs, RFMR, ssc_p->ssc_state.ssc_rfmr); - ssc_writel(ssc_p->ssc->regs, RCMR, ssc_p->ssc_state.ssc_rcmr); - ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->ssc_state.ssc_cmr); - - /* re-enable interrupts */ - ssc_writel(ssc_p->ssc->regs, IER, ssc_p->ssc_state.ssc_imr); - - /* Re-enable recieve and transmit as appropriate */ - cr = 0; - cr |= - (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_RXEN)) ? SSC_BIT(CR_RXEN) : 0; - cr |= - (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_TXEN)) ? SSC_BIT(CR_TXEN) : 0; - ssc_writel(ssc_p->ssc->regs, CR, cr); - - return 0; -} -#else /* CONFIG_PM */ -# define at32_ssc_suspend NULL -# define at32_ssc_resume NULL -#endif /* CONFIG_PM */ - - -#define AT32_SSC_RATES \ - (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | SNDRV_PCM_RATE_16000 | \ - SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \ - SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000) - - -#define AT32_SSC_FORMATS \ - (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16 | \ - SNDRV_PCM_FMTBIT_S24 | SNDRV_PCM_FMTBIT_S32) - - -struct snd_soc_dai at32_ssc_dai[NUM_SSC_DEVICES] = { - { - .name = "at32-ssc0", - .id = 0, - .type = SND_SOC_DAI_PCM, - .suspend = at32_ssc_suspend, - .resume = at32_ssc_resume, - .playback = { - .channels_min = 1, - .channels_max = 2, - .rates = AT32_SSC_RATES, - .formats = AT32_SSC_FORMATS, - }, - .capture = { - .channels_min = 1, - .channels_max = 2, - .rates = AT32_SSC_RATES, - .formats = AT32_SSC_FORMATS, - }, - .ops = { - .startup = at32_ssc_startup, - .shutdown = at32_ssc_shutdown, - .prepare = at32_ssc_prepare, - .hw_params = at32_ssc_hw_params, - }, - .dai_ops = { - .set_sysclk = at32_ssc_set_dai_sysclk, - .set_fmt = at32_ssc_set_dai_fmt, - .set_clkdiv = at32_ssc_set_dai_clkdiv, - }, - .private_data = &ssc_info[0], - }, - { - .name = "at32-ssc1", - .id = 1, - .type = SND_SOC_DAI_PCM, - .suspend = at32_ssc_suspend, - .resume = at32_ssc_resume, - .playback = { - .channels_min = 1, - .channels_max = 2, - .rates = AT32_SSC_RATES, - .formats = AT32_SSC_FORMATS, - }, - .capture = { - .channels_min = 1, - .channels_max = 2, - .rates = AT32_SSC_RATES, - .formats = AT32_SSC_FORMATS, - }, - .ops = { - .startup = at32_ssc_startup, - .shutdown = at32_ssc_shutdown, - .prepare = at32_ssc_prepare, - .hw_params = at32_ssc_hw_params, - }, - .dai_ops = { - .set_sysclk = at32_ssc_set_dai_sysclk, - .set_fmt = at32_ssc_set_dai_fmt, - .set_clkdiv = at32_ssc_set_dai_clkdiv, - }, - .private_data = &ssc_info[1], - }, - { - .name = "at32-ssc2", - .id = 2, - .type = SND_SOC_DAI_PCM, - .suspend = at32_ssc_suspend, - .resume = at32_ssc_resume, - .playback = { - .channels_min = 1, - .channels_max = 2, - .rates = AT32_SSC_RATES, - .formats = AT32_SSC_FORMATS, - }, - .capture = { - .channels_min = 1, - .channels_max = 2, - .rates = AT32_SSC_RATES, - .formats = AT32_SSC_FORMATS, - }, - .ops = { - .startup = at32_ssc_startup, - .shutdown = at32_ssc_shutdown, - .prepare = at32_ssc_prepare, - .hw_params = at32_ssc_hw_params, - }, - .dai_ops = { - .set_sysclk = at32_ssc_set_dai_sysclk, - .set_fmt = at32_ssc_set_dai_fmt, - .set_clkdiv = at32_ssc_set_dai_clkdiv, - }, - .private_data = &ssc_info[2], - }, -}; -EXPORT_SYMBOL_GPL(at32_ssc_dai); - - -MODULE_AUTHOR("Geoffrey Wossum <gwossum@acm.org>"); -MODULE_DESCRIPTION("AT32 SSC ASoC Interface"); -MODULE_LICENSE("GPL"); |