diff options
Diffstat (limited to 'sound/pci/hda/alc260_quirks.c')
| -rw-r--r-- | sound/pci/hda/alc260_quirks.c | 1272 |
1 files changed, 1272 insertions, 0 deletions
diff --git a/sound/pci/hda/alc260_quirks.c b/sound/pci/hda/alc260_quirks.c new file mode 100644 index 00000000000..21ec2cb100b --- /dev/null +++ b/sound/pci/hda/alc260_quirks.c @@ -0,0 +1,1272 @@ +/* + * ALC260 quirk models + * included by patch_realtek.c + */ + +/* ALC260 models */ +enum { + ALC260_AUTO, + ALC260_BASIC, + ALC260_HP, + ALC260_HP_DC7600, + ALC260_HP_3013, + ALC260_FUJITSU_S702X, + ALC260_ACER, + ALC260_WILL, + ALC260_REPLACER_672V, + ALC260_FAVORIT100, +#ifdef CONFIG_SND_DEBUG + ALC260_TEST, +#endif + ALC260_MODEL_LAST /* last tag */ +}; + +static const hda_nid_t alc260_dac_nids[1] = { + /* front */ + 0x02, +}; + +static const hda_nid_t alc260_adc_nids[1] = { + /* ADC0 */ + 0x04, +}; + +static const hda_nid_t alc260_adc_nids_alt[1] = { + /* ADC1 */ + 0x05, +}; + +/* NIDs used when simultaneous access to both ADCs makes sense. Note that + * alc260_capture_mixer assumes ADC0 (nid 0x04) is the first ADC. + */ +static const hda_nid_t alc260_dual_adc_nids[2] = { + /* ADC0, ADC1 */ + 0x04, 0x05 +}; + +#define ALC260_DIGOUT_NID 0x03 +#define ALC260_DIGIN_NID 0x06 + +static const struct hda_input_mux alc260_capture_source = { + .num_items = 4, + .items = { + { "Mic", 0x0 }, + { "Front Mic", 0x1 }, + { "Line", 0x2 }, + { "CD", 0x4 }, + }, +}; + +/* On Fujitsu S702x laptops capture only makes sense from Mic/LineIn jack, + * headphone jack and the internal CD lines since these are the only pins at + * which audio can appear. For flexibility, also allow the option of + * recording the mixer output on the second ADC (ADC0 doesn't have a + * connection to the mixer output). + */ +static const struct hda_input_mux alc260_fujitsu_capture_sources[2] = { + { + .num_items = 3, + .items = { + { "Mic/Line", 0x0 }, + { "CD", 0x4 }, + { "Headphone", 0x2 }, + }, + }, + { + .num_items = 4, + .items = { + { "Mic/Line", 0x0 }, + { "CD", 0x4 }, + { "Headphone", 0x2 }, + { "Mixer", 0x5 }, + }, + }, + +}; + +/* Acer TravelMate(/Extensa/Aspire) notebooks have similar configuration to + * the Fujitsu S702x, but jacks are marked differently. + */ +static const struct hda_input_mux alc260_acer_capture_sources[2] = { + { + .num_items = 4, + .items = { + { "Mic", 0x0 }, + { "Line", 0x2 }, + { "CD", 0x4 }, + { "Headphone", 0x5 }, + }, + }, + { + .num_items = 5, + .items = { + { "Mic", 0x0 }, + { "Line", 0x2 }, + { "CD", 0x4 }, + { "Headphone", 0x6 }, + { "Mixer", 0x5 }, + }, + }, +}; + +/* Maxdata Favorit 100XS */ +static const struct hda_input_mux alc260_favorit100_capture_sources[2] = { + { + .num_items = 2, + .items = { + { "Line/Mic", 0x0 }, + { "CD", 0x4 }, + }, + }, + { + .num_items = 3, + .items = { + { "Line/Mic", 0x0 }, + { "CD", 0x4 }, + { "Mixer", 0x5 }, + }, + }, +}; + +/* + * This is just place-holder, so there's something for alc_build_pcms to look + * at when it calculates the maximum number of channels. ALC260 has no mixer + * element which allows changing the channel mode, so the verb list is + * never used. + */ +static const struct hda_channel_mode alc260_modes[1] = { + { 2, NULL }, +}; + + +/* Mixer combinations + * + * basic: base_output + input + pc_beep + capture + * HP: base_output + input + capture_alt + * HP_3013: hp_3013 + input + capture + * fujitsu: fujitsu + capture + * acer: acer + capture + */ + +static const struct snd_kcontrol_new alc260_base_output_mixer[] = { + HDA_CODEC_VOLUME("Front Playback Volume", 0x08, 0x0, HDA_OUTPUT), + HDA_BIND_MUTE("Front Playback Switch", 0x08, 2, HDA_INPUT), + HDA_CODEC_VOLUME("Headphone Playback Volume", 0x09, 0x0, HDA_OUTPUT), + HDA_BIND_MUTE("Headphone Playback Switch", 0x09, 2, HDA_INPUT), + HDA_CODEC_VOLUME_MONO("Mono Playback Volume", 0x0a, 1, 0x0, HDA_OUTPUT), + HDA_BIND_MUTE_MONO("Mono Playback Switch", 0x0a, 1, 2, HDA_INPUT), + { } /* end */ +}; + +static const struct snd_kcontrol_new alc260_input_mixer[] = { + HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT), + HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT), + HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT), + HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT), + HDA_CODEC_VOLUME("Mic Playback Volume", 0x07, 0x0, HDA_INPUT), + HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT), + HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x07, 0x01, HDA_INPUT), + HDA_CODEC_MUTE("Front Mic Playback Switch", 0x07, 0x01, HDA_INPUT), + { } /* end */ +}; + +/* update HP, line and mono out pins according to the master switch */ +static void alc260_hp_master_update(struct hda_codec *codec) +{ + update_speakers(codec); +} + +static int alc260_hp_master_sw_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct hda_codec *codec = snd_kcontrol_chip(kcontrol); + struct alc_spec *spec = codec->spec; + *ucontrol->value.integer.value = !spec->master_mute; + return 0; +} + +static int alc260_hp_master_sw_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct hda_codec *codec = snd_kcontrol_chip(kcontrol); + struct alc_spec *spec = codec->spec; + int val = !*ucontrol->value.integer.value; + + if (val == spec->master_mute) + return 0; + spec->master_mute = val; + alc260_hp_master_update(codec); + return 1; +} + +static const struct snd_kcontrol_new alc260_hp_output_mixer[] = { + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Master Playback Switch", + .subdevice = HDA_SUBDEV_NID_FLAG | 0x11, + .info = snd_ctl_boolean_mono_info, + .get = alc260_hp_master_sw_get, + .put = alc260_hp_master_sw_put, + }, + HDA_CODEC_VOLUME("Front Playback Volume", 0x08, 0x0, HDA_OUTPUT), + HDA_BIND_MUTE("Front Playback Switch", 0x08, 2, HDA_INPUT), + HDA_CODEC_VOLUME("Headphone Playback Volume", 0x09, 0x0, HDA_OUTPUT), + HDA_BIND_MUTE("Headphone Playback Switch", 0x09, 2, HDA_INPUT), + HDA_CODEC_VOLUME_MONO("Speaker Playback Volume", 0x0a, 1, 0x0, + HDA_OUTPUT), + HDA_BIND_MUTE_MONO("Speaker Playback Switch", 0x0a, 1, 2, HDA_INPUT), + { } /* end */ +}; + +static const struct hda_verb alc260_hp_unsol_verbs[] = { + {0x10, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT}, + {}, +}; + +static void alc260_hp_setup(struct hda_codec *codec) +{ + struct alc_spec *spec = codec->spec; + + spec->autocfg.hp_pins[0] = 0x0f; + spec->autocfg.speaker_pins[0] = 0x10; + spec->autocfg.speaker_pins[1] = 0x11; + spec->automute = 1; + spec->automute_mode = ALC_AUTOMUTE_PIN; +} + +static const struct snd_kcontrol_new alc260_hp_3013_mixer[] = { + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Master Playback Switch", + .subdevice = HDA_SUBDEV_NID_FLAG | 0x11, + .info = snd_ctl_boolean_mono_info, + .get = alc260_hp_master_sw_get, + .put = alc260_hp_master_sw_put, + }, + HDA_CODEC_VOLUME("Front Playback Volume", 0x09, 0x0, HDA_OUTPUT), + HDA_CODEC_MUTE("Front Playback Switch", 0x10, 0x0, HDA_OUTPUT), + HDA_CODEC_VOLUME("Aux-In Playback Volume", 0x07, 0x06, HDA_INPUT), + HDA_CODEC_MUTE("Aux-In Playback Switch", 0x07, 0x06, HDA_INPUT), + HDA_CODEC_VOLUME("Headphone Playback Volume", 0x08, 0x0, HDA_OUTPUT), + HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT), + HDA_CODEC_VOLUME_MONO("Speaker Playback Volume", 0x0a, 1, 0x0, HDA_OUTPUT), + HDA_CODEC_MUTE_MONO("Speaker Playback Switch", 0x11, 1, 0x0, HDA_OUTPUT), + { } /* end */ +}; + +static void alc260_hp_3013_setup(struct hda_codec *codec) +{ + struct alc_spec *spec = codec->spec; + + spec->autocfg.hp_pins[0] = 0x15; + spec->autocfg.speaker_pins[0] = 0x10; + spec->autocfg.speaker_pins[1] = 0x11; + spec->automute = 1; + spec->automute_mode = ALC_AUTOMUTE_PIN; +} + +static const struct hda_bind_ctls alc260_dc7600_bind_master_vol = { + .ops = &snd_hda_bind_vol, + .values = { + HDA_COMPOSE_AMP_VAL(0x08, 3, 0, HDA_OUTPUT), + HDA_COMPOSE_AMP_VAL(0x09, 3, 0, HDA_OUTPUT), + HDA_COMPOSE_AMP_VAL(0x0a, 3, 0, HDA_OUTPUT), + 0 + }, +}; + +static const struct hda_bind_ctls alc260_dc7600_bind_switch = { + .ops = &snd_hda_bind_sw, + .values = { + HDA_COMPOSE_AMP_VAL(0x11, 3, 0, HDA_OUTPUT), + HDA_COMPOSE_AMP_VAL(0x15, 3, 0, HDA_OUTPUT), + 0 + }, +}; + +static const struct snd_kcontrol_new alc260_hp_dc7600_mixer[] = { + HDA_BIND_VOL("Master Playback Volume", &alc260_dc7600_bind_master_vol), + HDA_BIND_SW("LineOut Playback Switch", &alc260_dc7600_bind_switch), + HDA_CODEC_MUTE("Speaker Playback Switch", 0x0f, 0x0, HDA_OUTPUT), + HDA_CODEC_MUTE("Headphone Playback Switch", 0x10, 0x0, HDA_OUTPUT), + { } /* end */ +}; + +static const struct hda_verb alc260_hp_3013_unsol_verbs[] = { + {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT}, + {}, +}; + +static void alc260_hp_3012_setup(struct hda_codec *codec) +{ + struct alc_spec *spec = codec->spec; + + spec->autocfg.hp_pins[0] = 0x10; + spec->autocfg.speaker_pins[0] = 0x0f; + spec->autocfg.speaker_pins[1] = 0x11; + spec->autocfg.speaker_pins[2] = 0x15; + spec->automute = 1; + spec->automute_mode = ALC_AUTOMUTE_PIN; +} + +/* Fujitsu S702x series laptops. ALC260 pin usage: Mic/Line jack = 0x12, + * HP jack = 0x14, CD audio = 0x16, internal speaker = 0x10. + */ +static const struct snd_kcontrol_new alc260_fujitsu_mixer[] = { + HDA_CODEC_VOLUME("Headphone Playback Volume", 0x08, 0x0, HDA_OUTPUT), + HDA_BIND_MUTE("Headphone Playback Switch", 0x08, 2, HDA_INPUT), + ALC_PIN_MODE("Headphone Jack Mode", 0x14, ALC_PIN_DIR_INOUT), + HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT), + HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT), + HDA_CODEC_VOLUME("Mic/Line Playback Volume", 0x07, 0x0, HDA_INPUT), + HDA_CODEC_MUTE("Mic/Line Playback Switch", 0x07, 0x0, HDA_INPUT), + ALC_PIN_MODE("Mic/Line Jack Mode", 0x12, ALC_PIN_DIR_IN), + HDA_CODEC_VOLUME("Speaker Playback Volume", 0x09, 0x0, HDA_OUTPUT), + HDA_BIND_MUTE("Speaker Playback Switch", 0x09, 2, HDA_INPUT), + { } /* end */ +}; + +/* Mixer for Acer TravelMate(/Extensa/Aspire) notebooks. Note that current + * versions of the ALC260 don't act on requests to enable mic bias from NID + * 0x0f (used to drive the headphone jack in these laptops). The ALC260 + * datasheet doesn't mention this restriction. At this stage it's not clear + * whether this behaviour is intentional or is a hardware bug in chip + * revisions available in early 2006. Therefore for now allow the + * "Headphone Jack Mode" control to span all choices, but if it turns out + * that the lack of mic bias for this NID is intentional we could change the + * mode from ALC_PIN_DIR_INOUT to ALC_PIN_DIR_INOUT_NOMICBIAS. + * + * In addition, Acer TravelMate(/Extensa/Aspire) notebooks in early 2006 + * don't appear to make the mic bias available from the "line" jack, even + * though the NID used for this jack (0x14) can supply it. The theory is + * that perhaps Acer have included blocking capacitors between the ALC260 + * and the output jack. If this turns out to be the case for all such + * models the "Line Jack Mode" mode could be changed from ALC_PIN_DIR_INOUT + * to ALC_PIN_DIR_INOUT_NOMICBIAS. + * + * The C20x Tablet series have a mono internal speaker which is controlled + * via the chip's Mono sum widget and pin complex, so include the necessary + * controls for such models. On models without a "mono speaker" the control + * won't do anything. + */ +static const struct snd_kcontrol_new alc260_acer_mixer[] = { + HDA_CODEC_VOLUME("Master Playback Volume", 0x08, 0x0, HDA_OUTPUT), + HDA_BIND_MUTE("Master Playback Switch", 0x08, 2, HDA_INPUT), + ALC_PIN_MODE("Headphone Jack Mode", 0x0f, ALC_PIN_DIR_INOUT), + HDA_CODEC_VOLUME_MONO("Speaker Playback Volume", 0x0a, 1, 0x0, + HDA_OUTPUT), + HDA_BIND_MUTE_MONO("Speaker Playback Switch", 0x0a, 1, 2, + HDA_INPUT), + HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT), + HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT), + HDA_CODEC_VOLUME("Mic Playback Volume", 0x07, 0x0, HDA_INPUT), + HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT), + ALC_PIN_MODE("Mic Jack Mode", 0x12, ALC_PIN_DIR_IN), + HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT), + HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT), + ALC_PIN_MODE("Line Jack Mode", 0x14, ALC_PIN_DIR_INOUT), + { } /* end */ +}; + +/* Maxdata Favorit 100XS: one output and one input (0x12) jack + */ +static const struct snd_kcontrol_new alc260_favorit100_mixer[] = { + HDA_CODEC_VOLUME("Master Playback Volume", 0x08, 0x0, HDA_OUTPUT), + HDA_BIND_MUTE("Master Playback Switch", 0x08, 2, HDA_INPUT), + ALC_PIN_MODE("Output Jack Mode", 0x0f, ALC_PIN_DIR_INOUT), + HDA_CODEC_VOLUME("Line/Mic Playback Volume", 0x07, 0x0, HDA_INPUT), + HDA_CODEC_MUTE("Line/Mic Playback Switch", 0x07, 0x0, HDA_INPUT), + ALC_PIN_MODE("Line/Mic Jack Mode", 0x12, ALC_PIN_DIR_IN), + { } /* end */ +}; + +/* Packard bell V7900 ALC260 pin usage: HP = 0x0f, Mic jack = 0x12, + * Line In jack = 0x14, CD audio = 0x16, pc beep = 0x17. + */ +static const struct snd_kcontrol_new alc260_will_mixer[] = { + HDA_CODEC_VOLUME("Master Playback Volume", 0x08, 0x0, HDA_OUTPUT), + HDA_BIND_MUTE("Master Playback Switch", 0x08, 0x2, HDA_INPUT), + HDA_CODEC_VOLUME("Mic Playback Volume", 0x07, 0x0, HDA_INPUT), + HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT), + ALC_PIN_MODE("Mic Jack Mode", 0x12, ALC_PIN_DIR_IN), + HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT), + HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT), + ALC_PIN_MODE("Line Jack Mode", 0x14, ALC_PIN_DIR_INOUT), + HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT), + HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT), + { } /* end */ +}; + +/* Replacer 672V ALC260 pin usage: Mic jack = 0x12, + * Line In jack = 0x14, ATAPI Mic = 0x13, speaker = 0x0f. + */ +static const struct snd_kcontrol_new alc260_replacer_672v_mixer[] = { + HDA_CODEC_VOLUME("Master Playback Volume", 0x08, 0x0, HDA_OUTPUT), + HDA_BIND_MUTE("Master Playback Switch", 0x08, 0x2, HDA_INPUT), + HDA_CODEC_VOLUME("Mic Playback Volume", 0x07, 0x0, HDA_INPUT), + HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT), + ALC_PIN_MODE("Mic Jack Mode", 0x12, ALC_PIN_DIR_IN), + HDA_CODEC_VOLUME("ATAPI Mic Playback Volume", 0x07, 0x1, HDA_INPUT), + HDA_CODEC_MUTE("ATATI Mic Playback Switch", 0x07, 0x1, HDA_INPUT), + HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT), + HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT), + ALC_PIN_MODE("Line Jack Mode", 0x14, ALC_PIN_DIR_INOUT), + { } /* end */ +}; + +/* + * initialization verbs + */ +static const struct hda_verb alc260_init_verbs[] = { + /* Line In pin widget for input */ + {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, + /* CD pin widget for input */ + {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, + /* Mic1 (rear panel) pin widget for input and vref at 80% */ + {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, + /* Mic2 (front panel) pin widget for input and vref at 80% */ + {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, + /* LINE-2 is used for line-out in rear */ + {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + /* select line-out */ + {0x0e, AC_VERB_SET_CONNECT_SEL, 0x00}, + /* LINE-OUT pin */ + {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + /* enable HP */ + {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, + /* enable Mono */ + {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + /* mute capture amp left and right */ + {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, + /* set connection select to line in (default select for this ADC) */ + {0x04, AC_VERB_SET_CONNECT_SEL, 0x02}, + /* mute capture amp left and right */ + {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, + /* set connection select to line in (default select for this ADC) */ + {0x05, AC_VERB_SET_CONNECT_SEL, 0x02}, + /* set vol=0 Line-Out mixer amp left and right */ + {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, + /* unmute pin widget amp left and right (no gain on this amp) */ + {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + /* set vol=0 HP mixer amp left and right */ + {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, + /* unmute pin widget amp left and right (no gain on this amp) */ + {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + /* set vol=0 Mono mixer amp left and right */ + {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, + /* unmute pin widget amp left and right (no gain on this amp) */ + {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + /* unmute LINE-2 out pin */ + {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + /* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 & + * Line In 2 = 0x03 + */ + /* mute analog inputs */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, + /* Amp Indexes: DAC = 0x01 & mixer = 0x00 */ + /* mute Front out path */ + {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, + /* mute Headphone out path */ + {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, + /* mute Mono out path */ + {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, + { } +}; + +#if 0 /* should be identical with alc260_init_verbs? */ +static const struct hda_verb alc260_hp_init_verbs[] = { + /* Headphone and output */ + {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0}, + /* mono output */ + {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40}, + /* Mic1 (rear panel) pin widget for input and vref at 80% */ + {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24}, + /* Mic2 (front panel) pin widget for input and vref at 80% */ + {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24}, + /* Line In pin widget for input */ + {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20}, + /* Line-2 pin widget for output */ + {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40}, + /* CD pin widget for input */ + {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20}, + /* unmute amp left and right */ + {0x04, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000}, + /* set connection select to line in (default select for this ADC) */ + {0x04, AC_VERB_SET_CONNECT_SEL, 0x02}, + /* unmute Line-Out mixer amp left and right (volume = 0) */ + {0x08, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000}, + /* mute pin widget amp left and right (no gain on this amp) */ + {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000}, + /* unmute HP mixer amp left and right (volume = 0) */ + {0x09, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000}, + /* mute pin widget amp left and right (no gain on this amp) */ + {0x10, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000}, + /* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 & + * Line In 2 = 0x03 + */ + /* mute analog inputs */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, + /* Amp Indexes: DAC = 0x01 & mixer = 0x00 */ + /* Unmute Front out path */ + {0x08, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, + {0x08, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))}, + /* Unmute Headphone out path */ + {0x09, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, + {0x09, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))}, + /* Unmute Mono out path */ + {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, + {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))}, + { } +}; +#endif + +static const struct hda_verb alc260_hp_3013_init_verbs[] = { + /* Line out and output */ + {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40}, + /* mono output */ + {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40}, + /* Mic1 (rear panel) pin widget for input and vref at 80% */ + {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24}, + /* Mic2 (front panel) pin widget for input and vref at 80% */ + {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24}, + /* Line In pin widget for input */ + {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20}, + /* Headphone pin widget for output */ + {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0}, + /* CD pin widget for input */ + {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20}, + /* unmute amp left and right */ + {0x04, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000}, + /* set connection select to line in (default select for this ADC) */ + {0x04, AC_VERB_SET_CONNECT_SEL, 0x02}, + /* unmute Line-Out mixer amp left and right (volume = 0) */ + {0x08, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000}, + /* mute pin widget amp left and right (no gain on this amp) */ + {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000}, + /* unmute HP mixer amp left and right (volume = 0) */ + {0x09, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000}, + /* mute pin widget amp left and right (no gain on this amp) */ + {0x10, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000}, + /* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 & + * Line In 2 = 0x03 + */ + /* mute analog inputs */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, + /* Amp Indexes: DAC = 0x01 & mixer = 0x00 */ + /* Unmute Front out path */ + {0x08, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, + {0x08, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))}, + /* Unmute Headphone out path */ + {0x09, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, + {0x09, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))}, + /* Unmute Mono out path */ + {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, + {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))}, + { } +}; + +/* Initialisation sequence for ALC260 as configured in Fujitsu S702x + * laptops. ALC260 pin usage: Mic/Line jack = 0x12, HP jack = 0x14, CD + * audio = 0x16, internal speaker = 0x10. + */ +static const struct hda_verb alc260_fujitsu_init_verbs[] = { + /* Disable all GPIOs */ + {0x01, AC_VERB_SET_GPIO_MASK, 0}, + /* Internal speaker is connected to headphone pin */ + {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, + /* Headphone/Line-out jack connects to Line1 pin; make it an output */ + {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + /* Mic/Line-in jack is connected to mic1 pin, so make it an input */ + {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, + /* Ensure all other unused pins are disabled and muted. */ + {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, + {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, + {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, + {0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, + {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + + /* Disable digital (SPDIF) pins */ + {0x03, AC_VERB_SET_DIGI_CONVERT_1, 0}, + {0x06, AC_VERB_SET_DIGI_CONVERT_1, 0}, + + /* Ensure Line1 pin widget takes its input from the OUT1 sum bus + * when acting as an output. + */ + {0x0d, AC_VERB_SET_CONNECT_SEL, 0}, + + /* Start with output sum widgets muted and their output gains at min */ + {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, + {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, + {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, + {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, + {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, + {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, + + /* Unmute HP pin widget amp left and right (no equiv mixer ctrl) */ + {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + /* Unmute Line1 pin widget output buffer since it starts as an output. + * If the pin mode is changed by the user the pin mode control will + * take care of enabling the pin's input/output buffers as needed. + * Therefore there's no need to enable the input buffer at this + * stage. + */ + {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + /* Unmute input buffer of pin widget used for Line-in (no equiv + * mixer ctrl) + */ + {0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, + + /* Mute capture amp left and right */ + {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + /* Set ADC connection select to match default mixer setting - line + * in (on mic1 pin) + */ + {0x04, AC_VERB_SET_CONNECT_SEL, 0x00}, + + /* Do the same for the second ADC: mute capture input amp and + * set ADC connection to line in (on mic1 pin) + */ + {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x05, AC_VERB_SET_CONNECT_SEL, 0x00}, + + /* Mute all inputs to mixer widget (even unconnected ones) */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */ + + { } +}; + +/* Initialisation sequence for ALC260 as configured in Acer TravelMate and + * similar laptops (adapted from Fujitsu init verbs). + */ +static const struct hda_verb alc260_acer_init_verbs[] = { + /* On TravelMate laptops, GPIO 0 enables the internal speaker and + * the headphone jack. Turn this on and rely on the standard mute + * methods whenever the user wants to turn these outputs off. + */ + {0x01, AC_VERB_SET_GPIO_MASK, 0x01}, + {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01}, + {0x01, AC_VERB_SET_GPIO_DATA, 0x01}, + /* Internal speaker/Headphone jack is connected to Line-out pin */ + {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, + /* Internal microphone/Mic jack is connected to Mic1 pin */ + {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF50}, + /* Line In jack is connected to Line1 pin */ + {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, + /* Some Acers (eg: C20x Tablets) use Mono pin for internal speaker */ + {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, + /* Ensure all other unused pins are disabled and muted. */ + {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, + {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, + {0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, + {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + /* Disable digital (SPDIF) pins */ + {0x03, AC_VERB_SET_DIGI_CONVERT_1, 0}, + {0x06, AC_VERB_SET_DIGI_CONVERT_1, 0}, + + /* Ensure Mic1 and Line1 pin widgets take input from the OUT1 sum + * bus when acting as outputs. + */ + {0x0b, AC_VERB_SET_CONNECT_SEL, 0}, + {0x0d, AC_VERB_SET_CONNECT_SEL, 0}, + + /* Start with output sum widgets muted and their output gains at min */ + {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, + {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, + {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, + {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, + {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, + {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, + + /* Unmute Line-out pin widget amp left and right + * (no equiv mixer ctrl) + */ + {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + /* Unmute mono pin widget amp output (no equiv mixer ctrl) */ + {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + /* Unmute Mic1 and Line1 pin widget input buffers since they start as + * inputs. If the pin mode is changed by the user the pin mode control + * will take care of enabling the pin's input/output buffers as needed. + * Therefore there's no need to enable the input buffer at this + * stage. + */ + {0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, + {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, + + /* Mute capture amp left and right */ + {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + /* Set ADC connection select to match default mixer setting - mic + * (on mic1 pin) + */ + {0x04, AC_VERB_SET_CONNECT_SEL, 0x00}, + + /* Do similar with the second ADC: mute capture input amp and + * set ADC connection to mic to match ALSA's default state. + */ + {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x05, AC_VERB_SET_CONNECT_SEL, 0x00}, + + /* Mute all inputs to mixer widget (even unconnected ones) */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */ + + { } +}; + +/* Initialisation sequence for Maxdata Favorit 100XS + * (adapted from Acer init verbs). + */ +static const struct hda_verb alc260_favorit100_init_verbs[] = { + /* GPIO 0 enables the output jack. + * Turn this on and rely on the standard mute + * methods whenever the user wants to turn these outputs off. + */ + {0x01, AC_VERB_SET_GPIO_MASK, 0x01}, + {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01}, + {0x01, AC_VERB_SET_GPIO_DATA, 0x01}, + /* Line/Mic input jack is connected to Mic1 pin */ + {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF50}, + /* Ensure all other unused pins are disabled and muted. */ + {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, + {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, + {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, + {0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, + {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, + {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + /* Disable digital (SPDIF) pins */ + {0x03, AC_VERB_SET_DIGI_CONVERT_1, 0}, + {0x06, AC_VERB_SET_DIGI_CONVERT_1, 0}, + + /* Ensure Mic1 and Line1 pin widgets take input from the OUT1 sum + * bus when acting as outputs. + */ + {0x0b, AC_VERB_SET_CONNECT_SEL, 0}, + {0x0d, AC_VERB_SET_CONNECT_SEL, 0}, + + /* Start with output sum widgets muted and their output gains at min */ + {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, + {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, + {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, + {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, + {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, + {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, + + /* Unmute Line-out pin widget amp left and right + * (no equiv mixer ctrl) + */ + {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + /* Unmute Mic1 and Line1 pin widget input buffers since they start as + * inputs. If the pin mode is changed by the user the pin mode control + * will take care of enabling the pin's input/output buffers as needed. + * Therefore there's no need to enable the input buffer at this + * stage. + */ + {0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, + + /* Mute capture amp left and right */ + {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + /* Set ADC connection select to match default mixer setting - mic + * (on mic1 pin) + */ + {0x04, AC_VERB_SET_CONNECT_SEL, 0x00}, + + /* Do similar with the second ADC: mute capture input amp and + * set ADC connection to mic to match ALSA's default state. + */ + {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x05, AC_VERB_SET_CONNECT_SEL, 0x00}, + + /* Mute all inputs to mixer widget (even unconnected ones) */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */ + + { } +}; + +static const struct hda_verb alc260_will_verbs[] = { + {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, + {0x0b, AC_VERB_SET_CONNECT_SEL, 0x00}, + {0x0d, AC_VERB_SET_CONNECT_SEL, 0x00}, + {0x0f, AC_VERB_SET_EAPD_BTLENABLE, 0x02}, + {0x1a, AC_VERB_SET_COEF_INDEX, 0x07}, + {0x1a, AC_VERB_SET_PROC_COEF, 0x3040}, + {} +}; + +static const struct hda_verb alc260_replacer_672v_verbs[] = { + {0x0f, AC_VERB_SET_EAPD_BTLENABLE, 0x02}, + {0x1a, AC_VERB_SET_COEF_INDEX, 0x07}, + {0x1a, AC_VERB_SET_PROC_COEF, 0x3050}, + + {0x01, AC_VERB_SET_GPIO_MASK, 0x01}, + {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01}, + {0x01, AC_VERB_SET_GPIO_DATA, 0x00}, + + {0x0f, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT}, + {} +}; + +/* toggle speaker-output according to the hp-jack state */ +static void alc260_replacer_672v_automute(struct hda_codec *codec) +{ + unsigned int present; + + /* speaker --> GPIO Data 0, hp or spdif --> GPIO data 1 */ + present = snd_hda_jack_detect(codec, 0x0f); + if (present) { + snd_hda_codec_write_cache(codec, 0x01, 0, + AC_VERB_SET_GPIO_DATA, 1); + snd_hda_codec_write_cache(codec, 0x0f, 0, + AC_VERB_SET_PIN_WIDGET_CONTROL, + PIN_HP); + } else { + snd_hda_codec_write_cache(codec, 0x01, 0, + AC_VERB_SET_GPIO_DATA, 0); + snd_hda_codec_write_cache(codec, 0x0f, 0, + AC_VERB_SET_PIN_WIDGET_CONTROL, + PIN_OUT); + } +} + +static void alc260_replacer_672v_unsol_event(struct hda_codec *codec, + unsigned int res) +{ + if ((res >> 26) == ALC_HP_EVENT) + alc260_replacer_672v_automute(codec); +} + +static const struct hda_verb alc260_hp_dc7600_verbs[] = { + {0x05, AC_VERB_SET_CONNECT_SEL, 0x01}, + {0x15, AC_VERB_SET_CONNECT_SEL, 0x01}, + {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, + {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, + {0x10, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT}, + {0x11, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT}, + {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT}, + {} +}; + +/* Test configuration for debugging, modelled after the ALC880 test + * configuration. + */ +#ifdef CONFIG_SND_DEBUG +static const hda_nid_t alc260_test_dac_nids[1] = { + 0x02, +}; +static const hda_nid_t alc260_test_adc_nids[2] = { + 0x04, 0x05, +}; +/* For testing the ALC260, each input MUX needs its own definition since + * the signal assignments are different. This assumes that the first ADC + * is NID 0x04. + */ +static const struct hda_input_mux alc260_test_capture_sources[2] = { + { + .num_items = 7, + .items = { + { "MIC1 pin", 0x0 }, + { "MIC2 pin", 0x1 }, + { "LINE1 pin", 0x2 }, + { "LINE2 pin", 0x3 }, + { "CD pin", 0x4 }, + { "LINE-OUT pin", 0x5 }, + { "HP-OUT pin", 0x6 }, + }, + }, + { + .num_items = 8, + .items = { + { "MIC1 pin", 0x0 }, + { "MIC2 pin", 0x1 }, + { "LINE1 pin", 0x2 }, + { "LINE2 pin", 0x3 }, + { "CD pin", 0x4 }, + { "Mixer", 0x5 }, + { "LINE-OUT pin", 0x6 }, + { "HP-OUT pin", 0x7 }, + }, + }, +}; +static const struct snd_kcontrol_new alc260_test_mixer[] = { + /* Output driver widgets */ + HDA_CODEC_VOLUME_MONO("Mono Playback Volume", 0x0a, 1, 0x0, HDA_OUTPUT), + HDA_BIND_MUTE_MONO("Mono Playback Switch", 0x0a, 1, 2, HDA_INPUT), + HDA_CODEC_VOLUME("LOUT2 Playback Volume", 0x09, 0x0, HDA_OUTPUT), + HDA_BIND_MUTE("LOUT2 Playback Switch", 0x09, 2, HDA_INPUT), + HDA_CODEC_VOLUME("LOUT1 Playback Volume", 0x08, 0x0, HDA_OUTPUT), + HDA_BIND_MUTE("LOUT1 Playback Switch", 0x08, 2, HDA_INPUT), + + /* Modes for retasking pin widgets + * Note: the ALC260 doesn't seem to act on requests to enable mic + * bias from NIDs 0x0f and 0x10. The ALC260 datasheet doesn't + * mention this restriction. At this stage it's not clear whether + * this behaviour is intentional or is a hardware bug in chip + * revisions available at least up until early 2006. Therefore for + * now allow the "HP-OUT" and "LINE-OUT" Mode controls to span all + * choices, but if it turns out that the lack of mic bias for these + * NIDs is intentional we could change their modes from + * ALC_PIN_DIR_INOUT to ALC_PIN_DIR_INOUT_NOMICBIAS. + */ + ALC_PIN_MODE("HP-OUT pin mode", 0x10, ALC_PIN_DIR_INOUT), + ALC_PIN_MODE("LINE-OUT pin mode", 0x0f, ALC_PIN_DIR_INOUT), + ALC_PIN_MODE("LINE2 pin mode", 0x15, ALC_PIN_DIR_INOUT), + ALC_PIN_MODE("LINE1 pin mode", 0x14, ALC_PIN_DIR_INOUT), + ALC_PIN_MODE("MIC2 pin mode", 0x13, ALC_PIN_DIR_INOUT), + ALC_PIN_MODE("MIC1 pin mode", 0x12, ALC_PIN_DIR_INOUT), + + /* Loopback mixer controls */ + HDA_CODEC_VOLUME("MIC1 Playback Volume", 0x07, 0x00, HDA_INPUT), + HDA_CODEC_MUTE("MIC1 Playback Switch", 0x07, 0x00, HDA_INPUT), + HDA_CODEC_VOLUME("MIC2 Playback Volume", 0x07, 0x01, HDA_INPUT), + HDA_CODEC_MUTE("MIC2 Playback Switch", 0x07, 0x01, HDA_INPUT), + HDA_CODEC_VOLUME("LINE1 Playback Volume", 0x07, 0x02, HDA_INPUT), + HDA_CODEC_MUTE("LINE1 Playback Switch", 0x07, 0x02, HDA_INPUT), + HDA_CODEC_VOLUME("LINE2 Playback Volume", 0x07, 0x03, HDA_INPUT), + HDA_CODEC_MUTE("LINE2 Playback Switch", 0x07, 0x03, HDA_INPUT), + HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT), + HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT), + HDA_CODEC_VOLUME("LINE-OUT loopback Playback Volume", 0x07, 0x06, HDA_INPUT), + HDA_CODEC_MUTE("LINE-OUT loopback Playback Switch", 0x07, 0x06, HDA_INPUT), + HDA_CODEC_VOLUME("HP-OUT loopback Playback Volume", 0x07, 0x7, HDA_INPUT), + HDA_CODEC_MUTE("HP-OUT loopback Playback Switch", 0x07, 0x7, HDA_INPUT), + + /* Controls for GPIO pins, assuming they are configured as outputs */ + ALC_GPIO_DATA_SWITCH("GPIO pin 0", 0x01, 0x01), + ALC_GPIO_DATA_SWITCH("GPIO pin 1", 0x01, 0x02), + ALC_GPIO_DATA_SWITCH("GPIO pin 2", 0x01, 0x04), + ALC_GPIO_DATA_SWITCH("GPIO pin 3", 0x01, 0x08), + + /* Switches to allow the digital IO pins to be enabled. The datasheet + * is ambigious as to which NID is which; testing on laptops which + * make this output available should provide clarification. + */ + ALC_SPDIF_CTRL_SWITCH("SPDIF Playback Switch", 0x03, 0x01), + ALC_SPDIF_CTRL_SWITCH("SPDIF Capture Switch", 0x06, 0x01), + + /* A switch allowing EAPD to be enabled. Some laptops seem to use + * this output to turn on an external amplifier. + */ + ALC_EAPD_CTRL_SWITCH("LINE-OUT EAPD Enable Switch", 0x0f, 0x02), + ALC_EAPD_CTRL_SWITCH("HP-OUT EAPD Enable Switch", 0x10, 0x02), + + { } /* end */ +}; +static const struct hda_verb alc260_test_init_verbs[] = { + /* Enable all GPIOs as outputs with an initial value of 0 */ + {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x0f}, + {0x01, AC_VERB_SET_GPIO_DATA, 0x00}, + {0x01, AC_VERB_SET_GPIO_MASK, 0x0f}, + + /* Enable retasking pins as output, initially without power amp */ + {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + + /* Disable digital (SPDIF) pins initially, but users can enable + * them via a mixer switch. In the case of SPDIF-out, this initverb + * payload also sets the generation to 0, output to be in "consumer" + * PCM format, copyright asserted, no pre-emphasis and no validity + * control. + */ + {0x03, AC_VERB_SET_DIGI_CONVERT_1, 0}, + {0x06, AC_VERB_SET_DIGI_CONVERT_1, 0}, + + /* Ensure mic1, mic2, line1 and line2 pin widgets take input from the + * OUT1 sum bus when acting as an output. + */ + {0x0b, AC_VERB_SET_CONNECT_SEL, 0}, + {0x0c, AC_VERB_SET_CONNECT_SEL, 0}, + {0x0d, AC_VERB_SET_CONNECT_SEL, 0}, + {0x0e, AC_VERB_SET_CONNECT_SEL, 0}, + + /* Start with output sum widgets muted and their output gains at min */ + {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, + {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, + {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, + {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, + {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, + {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, + + /* Unmute retasking pin widget output buffers since the default + * state appears to be output. As the pin mode is changed by the + * user the pin mode control will take care of enabling the pin's + * input/output buffers as needed. + */ + {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + /* Also unmute the mono-out pin widget */ + {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + + /* Mute capture amp left and right */ + {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + /* Set ADC connection select to match default mixer setting (mic1 + * pin) + */ + {0x04, AC_VERB_SET_CONNECT_SEL, 0x00}, + + /* Do the same for the second ADC: mute capture input amp and + * set ADC connection to mic1 pin + */ + {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x05, AC_VERB_SET_CONNECT_SEL, 0x00}, + + /* Mute all inputs to mixer widget (even unconnected ones) */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */ + + { } +}; +#endif + +/* + * ALC260 configurations + */ +static const char * const alc260_models[ALC260_MODEL_LAST] = { + [ALC260_BASIC] = "basic", + [ALC260_HP] = "hp", + [ALC260_HP_3013] = "hp-3013", + [ALC260_HP_DC7600] = "hp-dc7600", + [ALC260_FUJITSU_S702X] = "fujitsu", + [ALC260_ACER] = "acer", + [ALC260_WILL] = "will", + [ALC260_REPLACER_672V] = "replacer", + [ALC260_FAVORIT100] = "favorit100", +#ifdef CONFIG_SND_DEBUG + [ALC260_TEST] = "test", +#endif + [ALC260_AUTO] = "auto", +}; + +static const struct snd_pci_quirk alc260_cfg_tbl[] = { + SND_PCI_QUIRK(0x1025, 0x007b, "Acer C20x", ALC260_ACER), + SND_PCI_QUIRK(0x1025, 0x007f, "Acer", ALC260_WILL), + SND_PCI_QUIRK(0x1025, 0x008f, "Acer", ALC260_ACER), + SND_PCI_QUIRK(0x1509, 0x4540, "Favorit 100XS", ALC260_FAVORIT100), + SND_PCI_QUIRK(0x103c, 0x2808, "HP d5700", ALC260_HP_3013), + SND_PCI_QUIRK(0x103c, 0x280a, "HP d5750", ALC260_AUTO), /* no quirk */ + SND_PCI_QUIRK(0x103c, 0x3010, "HP", ALC260_HP_3013), + SND_PCI_QUIRK(0x103c, 0x3011, "HP", ALC260_HP_3013), + SND_PCI_QUIRK(0x103c, 0x3012, "HP", ALC260_HP_DC7600), + SND_PCI_QUIRK(0x103c, 0x3013, "HP", ALC260_HP_3013), + SND_PCI_QUIRK(0x103c, 0x3014, "HP", ALC260_HP), + SND_PCI_QUIRK(0x103c, 0x3015, "HP", ALC260_HP), + SND_PCI_QUIRK(0x103c, 0x3016, "HP", ALC260_HP), + SND_PCI_QUIRK(0x104d, 0x81bb, "Sony VAIO", ALC260_BASIC), + SND_PCI_QUIRK(0x104d, 0x81cc, "Sony VAIO", ALC260_BASIC), + SND_PCI_QUIRK(0x104d, 0x81cd, "Sony VAIO", ALC260_BASIC), + SND_PCI_QUIRK(0x10cf, 0x1326, "Fujitsu S702X", ALC260_FUJITSU_S702X), + SND_PCI_QUIRK(0x152d, 0x0729, "CTL U553W", ALC260_BASIC), + SND_PCI_QUIRK(0x161f, 0x2057, "Replacer 672V", ALC260_REPLACER_672V), + SND_PCI_QUIRK(0x1631, 0xc017, "PB V7900", ALC260_WILL), + {} +}; + +static const struct alc_config_preset alc260_presets[] = { + [ALC260_BASIC] = { + .mixers = { alc260_base_output_mixer, + alc260_input_mixer }, + .init_verbs = { alc260_init_verbs }, + .num_dacs = ARRAY_SIZE(alc260_dac_nids), + .dac_nids = alc260_dac_nids, + .num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids), + .adc_nids = alc260_dual_adc_nids, + .num_channel_mode = ARRAY_SIZE(alc260_modes), + .channel_mode = alc260_modes, + .input_mux = &alc260_capture_source, + }, + [ALC260_HP] = { + .mixers = { alc260_hp_output_mixer, + alc260_input_mixer }, + .init_verbs = { alc260_init_verbs, + alc260_hp_unsol_verbs }, + .num_dacs = ARRAY_SIZE(alc260_dac_nids), + .dac_nids = alc260_dac_nids, + .num_adc_nids = ARRAY_SIZE(alc260_adc_nids_alt), + .adc_nids = alc260_adc_nids_alt, + .num_channel_mode = ARRAY_SIZE(alc260_modes), + .channel_mode = alc260_modes, + .input_mux = &alc260_capture_source, + .unsol_event = alc_sku_unsol_event, + .setup = alc260_hp_setup, + .init_hook = alc_inithook, + }, + [ALC260_HP_DC7600] = { + .mixers = { alc260_hp_dc7600_mixer, + alc260_input_mixer }, + .init_verbs = { alc260_init_verbs, + alc260_hp_dc7600_verbs }, + .num_dacs = ARRAY_SIZE(alc260_dac_nids), + .dac_nids = alc260_dac_nids, + .num_adc_nids = ARRAY_SIZE(alc260_adc_nids_alt), + .adc_nids = alc260_adc_nids_alt, + .num_channel_mode = ARRAY_SIZE(alc260_modes), + .channel_mode = alc260_modes, + .input_mux = &alc260_capture_source, + .unsol_event = alc_sku_unsol_event, + .setup = alc260_hp_3012_setup, + .init_hook = alc_inithook, + }, + [ALC260_HP_3013] = { + .mixers = { alc260_hp_3013_mixer, + alc260_input_mixer }, + .init_verbs = { alc260_hp_3013_init_verbs, + alc260_hp_3013_unsol_verbs }, + .num_dacs = ARRAY_SIZE(alc260_dac_nids), + .dac_nids = alc260_dac_nids, + .num_adc_nids = ARRAY_SIZE(alc260_adc_nids_alt), + .adc_nids = alc260_adc_nids_alt, + .num_channel_mode = ARRAY_SIZE(alc260_modes), + .channel_mode = alc260_modes, + .input_mux = &alc260_capture_source, + .unsol_event = alc_sku_unsol_event, + .setup = alc260_hp_3013_setup, + .init_hook = alc_inithook, + }, + [ALC260_FUJITSU_S702X] = { + .mixers = { alc260_fujitsu_mixer }, + .init_verbs = { alc260_fujitsu_init_verbs }, + .num_dacs = ARRAY_SIZE(alc260_dac_nids), + .dac_nids = alc260_dac_nids, + .num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids), + .adc_nids = alc260_dual_adc_nids, + .num_channel_mode = ARRAY_SIZE(alc260_modes), + .channel_mode = alc260_modes, + .num_mux_defs = ARRAY_SIZE(alc260_fujitsu_capture_sources), + .input_mux = alc260_fujitsu_capture_sources, + }, + [ALC260_ACER] = { + .mixers = { alc260_acer_mixer }, + .init_verbs = { alc260_acer_init_verbs }, + .num_dacs = ARRAY_SIZE(alc260_dac_nids), + .dac_nids = alc260_dac_nids, + .num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids), + .adc_nids = alc260_dual_adc_nids, + .num_channel_mode = ARRAY_SIZE(alc260_modes), + .channel_mode = alc260_modes, + .num_mux_defs = ARRAY_SIZE(alc260_acer_capture_sources), + .input_mux = alc260_acer_capture_sources, + }, + [ALC260_FAVORIT100] = { + .mixers = { alc260_favorit100_mixer }, + .init_verbs = { alc260_favorit100_init_verbs }, + .num_dacs = ARRAY_SIZE(alc260_dac_nids), + .dac_nids = alc260_dac_nids, + .num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids), + .adc_nids = alc260_dual_adc_nids, + .num_channel_mode = ARRAY_SIZE(alc260_modes), + .channel_mode = alc260_modes, + .num_mux_defs = ARRAY_SIZE(alc260_favorit100_capture_sources), + .input_mux = alc260_favorit100_capture_sources, + }, + [ALC260_WILL] = { + .mixers = { alc260_will_mixer }, + .init_verbs = { alc260_init_verbs, alc260_will_verbs }, + .num_dacs = ARRAY_SIZE(alc260_dac_nids), + .dac_nids = alc260_dac_nids, + .num_adc_nids = ARRAY_SIZE(alc260_adc_nids), + .adc_nids = alc260_adc_nids, + .dig_out_nid = ALC260_DIGOUT_NID, + .num_channel_mode = ARRAY_SIZE(alc260_modes), + .channel_mode = alc260_modes, + .input_mux = &alc260_capture_source, + }, + [ALC260_REPLACER_672V] = { + .mixers = { alc260_replacer_672v_mixer }, + .init_verbs = { alc260_init_verbs, alc260_replacer_672v_verbs }, + .num_dacs = ARRAY_SIZE(alc260_dac_nids), + .dac_nids = alc260_dac_nids, + .num_adc_nids = ARRAY_SIZE(alc260_adc_nids), + .adc_nids = alc260_adc_nids, + .dig_out_nid = ALC260_DIGOUT_NID, + .num_channel_mode = ARRAY_SIZE(alc260_modes), + .channel_mode = alc260_modes, + .input_mux = &alc260_capture_source, + .unsol_event = alc260_replacer_672v_unsol_event, + .init_hook = alc260_replacer_672v_automute, + }, +#ifdef CONFIG_SND_DEBUG + [ALC260_TEST] = { + .mixers = { alc260_test_mixer }, + .init_verbs = { alc260_test_init_verbs }, + .num_dacs = ARRAY_SIZE(alc260_test_dac_nids), + .dac_nids = alc260_test_dac_nids, + .num_adc_nids = ARRAY_SIZE(alc260_test_adc_nids), + .adc_nids = alc260_test_adc_nids, + .num_channel_mode = ARRAY_SIZE(alc260_modes), + .channel_mode = alc260_modes, + .num_mux_defs = ARRAY_SIZE(alc260_test_capture_sources), + .input_mux = alc260_test_capture_sources, + }, +#endif +}; + |