diff options
Diffstat (limited to 'sound/pci/es1938.c')
| -rw-r--r-- | sound/pci/es1938.c | 27 |
1 files changed, 17 insertions, 10 deletions
diff --git a/sound/pci/es1938.c b/sound/pci/es1938.c index 34a78afc26d..fbd2ac09aa3 100644 --- a/sound/pci/es1938.c +++ b/sound/pci/es1938.c @@ -1608,8 +1608,8 @@ static int __devinit snd_es1938_create(struct snd_card *card, if ((err = pci_enable_device(pci)) < 0) return err; /* check, if we can restrict PCI DMA transfers to 24 bits */ - if (pci_set_dma_mask(pci, DMA_24BIT_MASK) < 0 || - pci_set_consistent_dma_mask(pci, DMA_24BIT_MASK) < 0) { + if (pci_set_dma_mask(pci, DMA_BIT_MASK(24)) < 0 || + pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(24)) < 0) { snd_printk(KERN_ERR "architecture does not support 24bit PCI busmaster DMA\n"); pci_disable_device(pci); return -ENXIO; @@ -1673,18 +1673,22 @@ static irqreturn_t snd_es1938_interrupt(int irq, void *dev_id) status = inb(SLIO_REG(chip, IRQCONTROL)); #if 0 - printk("Es1938debug - interrupt status: =0x%x\n", status); + printk(KERN_DEBUG "Es1938debug - interrupt status: =0x%x\n", status); #endif /* AUDIO 1 */ if (status & 0x10) { #if 0 - printk("Es1938debug - AUDIO channel 1 interrupt\n"); - printk("Es1938debug - AUDIO channel 1 DMAC DMA count: %u\n", + printk(KERN_DEBUG + "Es1938debug - AUDIO channel 1 interrupt\n"); + printk(KERN_DEBUG + "Es1938debug - AUDIO channel 1 DMAC DMA count: %u\n", inw(SLDM_REG(chip, DMACOUNT))); - printk("Es1938debug - AUDIO channel 1 DMAC DMA base: %u\n", + printk(KERN_DEBUG + "Es1938debug - AUDIO channel 1 DMAC DMA base: %u\n", inl(SLDM_REG(chip, DMAADDR))); - printk("Es1938debug - AUDIO channel 1 DMAC DMA status: 0x%x\n", + printk(KERN_DEBUG + "Es1938debug - AUDIO channel 1 DMAC DMA status: 0x%x\n", inl(SLDM_REG(chip, DMASTATUS))); #endif /* clear irq */ @@ -1699,10 +1703,13 @@ static irqreturn_t snd_es1938_interrupt(int irq, void *dev_id) /* AUDIO 2 */ if (status & 0x20) { #if 0 - printk("Es1938debug - AUDIO channel 2 interrupt\n"); - printk("Es1938debug - AUDIO channel 2 DMAC DMA count: %u\n", + printk(KERN_DEBUG + "Es1938debug - AUDIO channel 2 interrupt\n"); + printk(KERN_DEBUG + "Es1938debug - AUDIO channel 2 DMAC DMA count: %u\n", inw(SLIO_REG(chip, AUDIO2DMACOUNT))); - printk("Es1938debug - AUDIO channel 2 DMAC DMA base: %u\n", + printk(KERN_DEBUG + "Es1938debug - AUDIO channel 2 DMAC DMA base: %u\n", inl(SLIO_REG(chip, AUDIO2DMAADDR))); #endif |