1 files changed, 19 insertions, 14 deletions

diff --git a/sound/pci/echoaudio/layla20_dsp.c b/sound/pci/echoaudio/layla20_dsp.c
index 990c9a60a0a..53ce9460504 100644
--- a/sound/pci/echoaudio/layla20_dsp.c
+++ b/sound/pci/echoaudio/layla20_dsp.c
@@ -31,8 +31,7 @@
 
 static int read_dsp(struct echoaudio *chip, u32 *data);
 static int set_professional_spdif(struct echoaudio *chip, char prof);
-static int load_asic_generic(struct echoaudio *chip, u32 cmd,
-			     const struct firmware *asic);
+static int load_asic_generic(struct echoaudio *chip, u32 cmd, short asic);
 static int check_asic_status(struct echoaudio *chip);
 static int update_flags(struct echoaudio *chip);
 
@@ -42,7 +41,8 @@ static int init_hw(struct echoaudio *chip, u16 device_id, u16 subdevice_id)
 	int err;
 
 	DE_INIT(("init_hw() - Layla20\n"));
-	snd_assert((subdevice_id & 0xfff0) == LAYLA20, return -ENODEV);
+	if (snd_BUG_ON((subdevice_id & 0xfff0) != LAYLA20))
+		return -ENODEV;
 
 	if ((err = init_dsp_comm_page(chip))) {
 		DE_INIT(("init_hw - could not initialize DSP comm page\n"));
@@ -53,7 +53,7 @@ static int init_hw(struct echoaudio *chip, u16 device_id, u16 subdevice_id)
 	chip->subdevice_id = subdevice_id;
 	chip->bad_board = TRUE;
 	chip->has_midi = TRUE;
-	chip->dsp_code_to_load = &card_fw[FW_LAYLA20_DSP];
+	chip->dsp_code_to_load = FW_LAYLA20_DSP;
 	chip->input_clock_types =
 		ECHO_CLOCK_BIT_INTERNAL | ECHO_CLOCK_BIT_SPDIF |
 		ECHO_CLOCK_BIT_WORD | ECHO_CLOCK_BIT_SUPER;
@@ -64,17 +64,20 @@ static int init_hw(struct echoaudio *chip, u16 device_id, u16 subdevice_id)
 		return err;
 	chip->bad_board = FALSE;
 
-	if ((err = init_line_levels(chip)) < 0)
-		return err;
-
-	err = set_professional_spdif(chip, TRUE);
-
 	DE_INIT(("init_hw done\n"));
 	return err;
 }
 
 
 
+static int set_mixer_defaults(struct echoaudio *chip)
+{
+	chip->professional_spdif = FALSE;
+	return init_line_levels(chip);
+}
+
+
+
 static u32 detect_input_clocks(const struct echoaudio *chip)
 {
 	u32 clocks_from_dsp, clock_bits;
@@ -143,7 +146,7 @@ static int load_asic(struct echoaudio *chip)
 		return 0;
 
 	err = load_asic_generic(chip, DSP_FNC_LOAD_LAYLA_ASIC,
-				&card_fw[FW_LAYLA20_ASIC]);
+				FW_LAYLA20_ASIC);
 	if (err < 0)
 		return err;
 
@@ -155,7 +158,8 @@ static int load_asic(struct echoaudio *chip)
 
 static int set_sample_rate(struct echoaudio *chip, u32 rate)
 {
-	snd_assert(rate >= 8000 && rate <= 50000, return -EINVAL);
+	if (snd_BUG_ON(rate < 8000 || rate > 50000))
+		return -EINVAL;
 
 	/* Only set the clock for internal mode. Do not return failure,
 	   simply treat it as a non-event. */
@@ -252,7 +256,8 @@ static int set_output_clock(struct echoaudio *chip, u16 clock)
 /* Set input bus gain (one unit is 0.5dB !) */
 static int set_input_gain(struct echoaudio *chip, u16 input, int gain)
 {
-	snd_assert(input < num_busses_in(chip), return -EINVAL);
+	if (snd_BUG_ON(input >= num_busses_in(chip)))
+		return -EINVAL;
 
 	if (wait_handshake(chip))
 		return -EIO;
@@ -281,10 +286,10 @@ static int set_professional_spdif(struct echoaudio *chip, char prof)
 	DE_ACT(("set_professional_spdif %d\n", prof));
 	if (prof)
 		chip->comm_page->flags |=
-			__constant_cpu_to_le32(DSP_FLAG_PROFESSIONAL_SPDIF);
+			cpu_to_le32(DSP_FLAG_PROFESSIONAL_SPDIF);
 	else
 		chip->comm_page->flags &=
-			~__constant_cpu_to_le32(DSP_FLAG_PROFESSIONAL_SPDIF);
+			~cpu_to_le32(DSP_FLAG_PROFESSIONAL_SPDIF);
 	chip->professional_spdif = prof;
 	return update_flags(chip);
 }