diff options
Diffstat (limited to 'sound/pci/ca0106/ca0106.h')
| -rw-r--r-- | sound/pci/ca0106/ca0106.h | 98 |
1 files changed, 96 insertions, 2 deletions
diff --git a/sound/pci/ca0106/ca0106.h b/sound/pci/ca0106/ca0106.h index a0420bc63f0..75da1746e75 100644 --- a/sound/pci/ca0106/ca0106.h +++ b/sound/pci/ca0106/ca0106.h @@ -1,7 +1,7 @@ /* * Copyright (c) 2004 James Courtier-Dutton <James@superbug.demon.co.uk> * Driver CA0106 chips. e.g. Sound Blaster Audigy LS and Live 24bit - * Version: 0.0.21 + * Version: 0.0.22 * * FEATURES currently supported: * See ca0106_main.c for features. @@ -47,6 +47,8 @@ * Added GPIO info for SB Live 24bit. * 0.0.21 * Implement support for Line-in capture on SB Live 24bit. + * 0.0.22 + * Add support for mute control on SB Live 24bit (cards w/ SPI DAC) * * * This code was initally based on code from ALSA's emu10k1x.c which is: @@ -552,6 +554,95 @@ #define CONTROL_CENTER_LFE_CHANNEL 1 #define CONTROL_UNKNOWN_CHANNEL 2 + +/* Based on WM8768 Datasheet Rev 4.2 page 32 */ +#define SPI_REG_MASK 0x1ff /* 16-bit SPI writes have a 7-bit address */ +#define SPI_REG_SHIFT 9 /* followed by 9 bits of data */ + +#define SPI_LDA1_REG 0 /* digital attenuation */ +#define SPI_RDA1_REG 1 +#define SPI_LDA2_REG 4 +#define SPI_RDA2_REG 5 +#define SPI_LDA3_REG 6 +#define SPI_RDA3_REG 7 +#define SPI_LDA4_REG 13 +#define SPI_RDA4_REG 14 +#define SPI_MASTDA_REG 8 + +#define SPI_DA_BIT_UPDATE (1<<8) /* update attenuation values */ +#define SPI_DA_BIT_0dB 0xff /* 0 dB */ +#define SPI_DA_BIT_infdB 0x00 /* inf dB attenuation (mute) */ + +#define SPI_PL_REG 2 +#define SPI_PL_BIT_L_M (0<<5) /* left channel = mute */ +#define SPI_PL_BIT_L_L (1<<5) /* left channel = left */ +#define SPI_PL_BIT_L_R (2<<5) /* left channel = right */ +#define SPI_PL_BIT_L_C (3<<5) /* left channel = (L+R)/2 */ +#define SPI_PL_BIT_R_M (0<<7) /* right channel = mute */ +#define SPI_PL_BIT_R_L (1<<7) /* right channel = left */ +#define SPI_PL_BIT_R_R (2<<7) /* right channel = right */ +#define SPI_PL_BIT_R_C (3<<7) /* right channel = (L+R)/2 */ +#define SPI_IZD_REG 2 +#define SPI_IZD_BIT (1<<4) /* infinite zero detect */ + +#define SPI_FMT_REG 3 +#define SPI_FMT_BIT_RJ (0<<0) /* right justified mode */ +#define SPI_FMT_BIT_LJ (1<<0) /* left justified mode */ +#define SPI_FMT_BIT_I2S (2<<0) /* I2S mode */ +#define SPI_FMT_BIT_DSP (3<<0) /* DSP Modes A or B */ +#define SPI_LRP_REG 3 +#define SPI_LRP_BIT (1<<2) /* invert LRCLK polarity */ +#define SPI_BCP_REG 3 +#define SPI_BCP_BIT (1<<3) /* invert BCLK polarity */ +#define SPI_IWL_REG 3 +#define SPI_IWL_BIT_16 (0<<4) /* 16-bit world length */ +#define SPI_IWL_BIT_20 (1<<4) /* 20-bit world length */ +#define SPI_IWL_BIT_24 (2<<4) /* 24-bit world length */ +#define SPI_IWL_BIT_32 (3<<4) /* 32-bit world length */ + +#define SPI_MS_REG 10 +#define SPI_MS_BIT (1<<5) /* master mode */ +#define SPI_RATE_REG 10 /* only applies in master mode */ +#define SPI_RATE_BIT_128 (0<<6) /* MCLK = LRCLK * 128 */ +#define SPI_RATE_BIT_192 (1<<6) +#define SPI_RATE_BIT_256 (2<<6) +#define SPI_RATE_BIT_384 (3<<6) +#define SPI_RATE_BIT_512 (4<<6) +#define SPI_RATE_BIT_768 (5<<6) + +/* They really do label the bit for the 4th channel "4" and not "3" */ +#define SPI_DMUTE0_REG 9 +#define SPI_DMUTE1_REG 9 +#define SPI_DMUTE2_REG 9 +#define SPI_DMUTE4_REG 15 +#define SPI_DMUTE0_BIT (1<<3) +#define SPI_DMUTE1_BIT (1<<4) +#define SPI_DMUTE2_BIT (1<<5) +#define SPI_DMUTE4_BIT (1<<2) + +#define SPI_PHASE0_REG 3 +#define SPI_PHASE1_REG 3 +#define SPI_PHASE2_REG 3 +#define SPI_PHASE4_REG 15 +#define SPI_PHASE0_BIT (1<<6) +#define SPI_PHASE1_BIT (1<<7) +#define SPI_PHASE2_BIT (1<<8) +#define SPI_PHASE4_BIT (1<<3) + +#define SPI_PDWN_REG 2 /* power down all DACs */ +#define SPI_PDWN_BIT (1<<2) +#define SPI_DACD0_REG 10 /* power down individual DACs */ +#define SPI_DACD1_REG 10 +#define SPI_DACD2_REG 10 +#define SPI_DACD4_REG 15 +#define SPI_DACD0_BIT (1<<1) +#define SPI_DACD1_BIT (1<<2) +#define SPI_DACD2_BIT (1<<3) +#define SPI_DACD4_BIT (1<<0) /* datasheet error says it's 1 */ + +#define SPI_PWRDNALL_REG 10 /* power down everything */ +#define SPI_PWRDNALL_BIT (1<<4) + #include "ca_midi.h" struct snd_ca0106; @@ -611,6 +702,8 @@ struct snd_ca0106 { struct snd_ca_midi midi; struct snd_ca_midi midi2; + + u16 spi_dac_reg[16]; }; int snd_ca0106_mixer(struct snd_ca0106 *emu); @@ -627,4 +720,5 @@ void snd_ca0106_ptr_write(struct snd_ca0106 *emu, int snd_ca0106_i2c_write(struct snd_ca0106 *emu, u32 reg, u32 value); - +int snd_ca0106_spi_write(struct snd_ca0106 * emu, + unsigned int data); |