diff options
Diffstat (limited to 'sound/oss/Kconfig')
| -rw-r--r-- | sound/oss/Kconfig | 62 |
1 files changed, 31 insertions, 31 deletions
diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig index e537bd66a70..3b1fafc8f4f 100644 --- a/sound/oss/Kconfig +++ b/sound/oss/Kconfig @@ -6,7 +6,7 @@ # Prompt user for primary drivers. config SOUND_BT878 tristate "BT878 audio dma" - depends on SOUND_PRIME!=n && SOUND + depends on SOUND_PRIME ---help--- Audio DMA support for bt878 based grabber boards. As you might have already noticed, bt878 is listed with two functions in /proc/pci. @@ -22,7 +22,7 @@ config SOUND_BT878 config SOUND_CMPCI tristate "C-Media PCI (CMI8338/8738)" - depends on SOUND_PRIME!=n && SOUND && PCI + depends on SOUND_PRIME && PCI help Say Y or M if you have a PCI sound card using the CMI8338 or the CMI8738 chipset. Data on these chips are available at @@ -61,7 +61,7 @@ config SOUND_CMPCI_JOYSTICK config SOUND_EMU10K1 tristate "Creative SBLive! (EMU10K1)" - depends on SOUND_PRIME!=n && SOUND && PCI + depends on SOUND_PRIME && PCI ---help--- Say Y or M if you have a PCI sound card using the EMU10K1 chipset, such as the Creative SBLive!, SB PCI512 or Emu-APS. @@ -87,7 +87,7 @@ config MIDI_EMU10K1 config SOUND_FUSION tristate "Crystal SoundFusion (CS4280/461x)" - depends on SOUND_PRIME!=n && SOUND + depends on SOUND_PRIME help This module drives the Crystal SoundFusion devices (CS4280/46xx series) when wired as native sound drivers with AC97 codecs. If @@ -95,14 +95,14 @@ config SOUND_FUSION config SOUND_CS4281 tristate "Crystal Sound CS4281" - depends on SOUND_PRIME!=n && SOUND + depends on SOUND_PRIME help Picture and feature list at <http://www.pcbroker.com/crystal4281.html>. config SOUND_BCM_CS4297A tristate "Crystal Sound CS4297a (for Swarm)" - depends on SOUND_PRIME!=n && SIBYTE_SWARM && SOUND + depends on SOUND_PRIME && SIBYTE_SWARM help The BCM91250A has a Crystal CS4297a on synchronous serial port B (in addition to the DB-9 serial port). Say Y or M @@ -112,7 +112,7 @@ config SOUND_BCM_CS4297A config SOUND_ES1370 tristate "Ensoniq AudioPCI (ES1370)" - depends on SOUND_PRIME!=n && SOUND && PCI + depends on SOUND_PRIME && PCI help Say Y or M if you have a PCI sound card utilizing the Ensoniq ES1370 chipset, such as Ensoniq's AudioPCI (non-97). To find @@ -125,7 +125,7 @@ config SOUND_ES1370 config SOUND_ES1371 tristate "Creative Ensoniq AudioPCI 97 (ES1371)" - depends on SOUND_PRIME!=n && SOUND && PCI + depends on SOUND_PRIME && PCI help Say Y or M if you have a PCI sound card utilizing the Ensoniq ES1371 chipset, such as Ensoniq's AudioPCI97. To find out if @@ -138,7 +138,7 @@ config SOUND_ES1371 config SOUND_ESSSOLO1 tristate "ESS Technology Solo1" - depends on SOUND_PRIME!=n && SOUND && PCI + depends on SOUND_PRIME && PCI help Say Y or M if you have a PCI sound card utilizing the ESS Technology Solo1 chip. To find out if your sound card uses a @@ -149,7 +149,7 @@ config SOUND_ESSSOLO1 config SOUND_MAESTRO tristate "ESS Maestro, Maestro2, Maestro2E driver" - depends on SOUND_PRIME!=n && SOUND && PCI + depends on SOUND_PRIME && PCI help Say Y or M if you have a sound system driven by ESS's Maestro line of PCI sound chips. These include the Maestro 1, Maestro 2, and @@ -158,28 +158,28 @@ config SOUND_MAESTRO config SOUND_MAESTRO3 tristate "ESS Maestro3/Allegro driver (EXPERIMENTAL)" - depends on SOUND_PRIME!=n && SOUND && PCI && EXPERIMENTAL + depends on SOUND_PRIME && PCI && EXPERIMENTAL help Say Y or M if you have a sound system driven by ESS's Maestro 3 PCI sound chip. config SOUND_ICH tristate "Intel ICH (i8xx) audio support" - depends on SOUND_PRIME!=n && PCI + depends on SOUND_PRIME && PCI help Support for integral audio in Intel's I/O Controller Hub (ICH) chipset, as used on the 810/820/840 motherboards. config SOUND_HARMONY tristate "PA Harmony audio driver" - depends on GSC_LASI && SOUND_PRIME!=n + depends on GSC_LASI && SOUND_PRIME help Say 'Y' or 'M' to include support for Harmony soundchip on HP 712, 715/new and many other GSC based machines. config SOUND_SONICVIBES tristate "S3 SonicVibes" - depends on SOUND_PRIME!=n && SOUND + depends on SOUND_PRIME help Say Y or M if you have a PCI sound card utilizing the S3 SonicVibes chipset. To find out if your sound card uses a @@ -190,7 +190,7 @@ config SOUND_SONICVIBES config SOUND_VWSND tristate "SGI Visual Workstation Sound" - depends on SOUND_PRIME!=n && X86_VISWS && SOUND + depends on SOUND_PRIME && X86_VISWS help Say Y or M if you have an SGI Visual Workstation and you want to be able to use its on-board audio. Read @@ -199,18 +199,18 @@ config SOUND_VWSND config SOUND_HAL2 tristate "SGI HAL2 sound (EXPERIMENTAL)" - depends on SOUND_PRIME!=n && SOUND && SGI_IP22 && EXPERIMENTAL + depends on SOUND_PRIME && SGI_IP22 && EXPERIMENTAL help Say Y or M if you have an SGI Indy system and want to be able to use it's on-board A2 audio system. config SOUND_IT8172 tristate "IT8172G Sound" - depends on SOUND_PRIME!=n && (MIPS_ITE8172 || MIPS_IVR) && SOUND + depends on SOUND_PRIME && (MIPS_ITE8172 || MIPS_IVR) config SOUND_VRC5477 tristate "NEC Vrc5477 AC97 sound" - depends on SOUND_PRIME!=n && DDB5477 && SOUND + depends on SOUND_PRIME && DDB5477 help Say Y here to enable sound support for the NEC Vrc5477 chip, an integrated, multi-function controller chip for MIPS CPUs. Works @@ -218,15 +218,15 @@ config SOUND_VRC5477 config SOUND_AU1000 tristate "Au1000 Sound" - depends on SOUND_PRIME!=n && (SOC_AU1000 || SOC_AU1100 || SOC_AU1500) && SOUND + depends on SOUND_PRIME && (SOC_AU1000 || SOC_AU1100 || SOC_AU1500) config SOUND_AU1550_AC97 tristate "Au1550 AC97 Sound" - depends on SOUND_PRIME!=n && SOC_AU1550 && SOUND + depends on SOUND_PRIME && SOC_AU1550 config SOUND_TRIDENT tristate "Trident 4DWave DX/NX, SiS 7018 or ALi 5451 PCI Audio Core" - depends on SOUND_PRIME!=n && SOUND + depends on SOUND_PRIME ---help--- Say Y or M if you have a PCI sound card utilizing the Trident 4DWave-DX/NX chipset or your mother board chipset has SiS 7018 @@ -267,7 +267,7 @@ config SOUND_TRIDENT config SOUND_MSNDCLAS tristate "Support for Turtle Beach MultiSound Classic, Tahiti, Monterey" - depends on SOUND_PRIME!=n && SOUND && (m || !STANDALONE) + depends on SOUND_PRIME && (m || !STANDALONE) help Say M here if you have a Turtle Beach MultiSound Classic, Tahiti or Monterey (not for the Pinnacle or Fiji). @@ -331,7 +331,7 @@ config MSNDCLAS_IO config SOUND_MSNDPIN tristate "Support for Turtle Beach MultiSound Pinnacle, Fiji" - depends on SOUND_PRIME!=n && SOUND && (m || !STANDALONE) + depends on SOUND_PRIME && (m || !STANDALONE) help Say M here if you have a Turtle Beach MultiSound Pinnacle or Fiji. See <file:Documentation/sound/oss/MultiSound> for important information @@ -492,7 +492,7 @@ config MSND_FIFOSIZE config SOUND_VIA82CXXX tristate "VIA 82C686 Audio Codec" - depends on SOUND_PRIME!=n && PCI + depends on SOUND_PRIME && PCI help Say Y here to include support for the audio codec found on VIA 82Cxxx-based chips. Typically these are built into a motherboard. @@ -512,7 +512,7 @@ config MIDI_VIA82CXXX config SOUND_OSS tristate "OSS sound modules" - depends on SOUND_PRIME!=n && SOUND + depends on SOUND_PRIME help OSS is the Open Sound System suite of sound card drivers. They make sound programming easier since they provide a common API. Say Y or @@ -1077,7 +1077,7 @@ config SOUND_WAVEARTIST config SOUND_TVMIXER tristate "TV card (bt848) mixer support" - depends on SOUND_PRIME!=n && SOUND && I2C + depends on SOUND_PRIME && I2C help Support for audio mixer facilities on the BT848 TV frame-grabber card. @@ -1088,11 +1088,11 @@ config SOUND_KAHLUA config SOUND_ALI5455 tristate "ALi5455 audio support" - depends on SOUND_PRIME!=n && PCI + depends on SOUND_PRIME && PCI config SOUND_FORTE tristate "ForteMedia FM801 driver" - depends on SOUND_PRIME!=n && PCI + depends on SOUND_PRIME && PCI help Say Y or M if you want driver support for the ForteMedia FM801 PCI audio controller (Abit AU10, Genius Sound Maker, HP Workstation @@ -1100,7 +1100,7 @@ config SOUND_FORTE config SOUND_RME96XX tristate "RME Hammerfall (RME96XX) support" - depends on SOUND_PRIME!=n && PCI + depends on SOUND_PRIME && PCI help Say Y or M if you have a Hammerfall or Hammerfall light multichannel card from RME. If you want to access advanced @@ -1108,11 +1108,11 @@ config SOUND_RME96XX config SOUND_AD1980 tristate "AD1980 front/back switch plugin" - depends on SOUND_PRIME!=n + depends on SOUND_PRIME config SOUND_SH_DAC_AUDIO tristate "SuperH DAC audio support" - depends on SOUND_PRIME!=n && SOUND && CPU_SH3 + depends on SOUND_PRIME && CPU_SH3 config SOUND_SH_DAC_AUDIO_CHANNEL int " DAC channel" |