diff options
Diffstat (limited to 'sound/aoa/soundbus/i2sbus/i2sbus-pcm.c')
| -rw-r--r-- | sound/aoa/soundbus/i2sbus/i2sbus-pcm.c | 1021 |
1 files changed, 1021 insertions, 0 deletions
diff --git a/sound/aoa/soundbus/i2sbus/i2sbus-pcm.c b/sound/aoa/soundbus/i2sbus/i2sbus-pcm.c new file mode 100644 index 00000000000..3049015a04f --- /dev/null +++ b/sound/aoa/soundbus/i2sbus/i2sbus-pcm.c @@ -0,0 +1,1021 @@ +/* + * i2sbus driver -- pcm routines + * + * Copyright 2006 Johannes Berg <johannes@sipsolutions.net> + * + * GPL v2, can be found in COPYING. + */ + +#include <asm/io.h> +#include <linux/delay.h> +/* So apparently there's a reason for requiring driver.h + * to be included first, even if I don't know it... */ +#include <sound/driver.h> +#include <sound/core.h> +#include <asm/macio.h> +#include <linux/pci.h> +#include "../soundbus.h" +#include "i2sbus.h" + +static inline void get_pcm_info(struct i2sbus_dev *i2sdev, int in, + struct pcm_info **pi, struct pcm_info **other) +{ + if (in) { + if (pi) + *pi = &i2sdev->in; + if (other) + *other = &i2sdev->out; + } else { + if (pi) + *pi = &i2sdev->out; + if (other) + *other = &i2sdev->in; + } +} + +static int clock_and_divisors(int mclk, int sclk, int rate, int *out) +{ + /* sclk must be derived from mclk! */ + if (mclk % sclk) + return -1; + /* derive sclk register value */ + if (i2s_sf_sclkdiv(mclk / sclk, out)) + return -1; + + if (I2S_CLOCK_SPEED_18MHz % (rate * mclk) == 0) { + if (!i2s_sf_mclkdiv(I2S_CLOCK_SPEED_18MHz / (rate * mclk), out)) { + *out |= I2S_SF_CLOCK_SOURCE_18MHz; + return 0; + } + } + if (I2S_CLOCK_SPEED_45MHz % (rate * mclk) == 0) { + if (!i2s_sf_mclkdiv(I2S_CLOCK_SPEED_45MHz / (rate * mclk), out)) { + *out |= I2S_SF_CLOCK_SOURCE_45MHz; + return 0; + } + } + if (I2S_CLOCK_SPEED_49MHz % (rate * mclk) == 0) { + if (!i2s_sf_mclkdiv(I2S_CLOCK_SPEED_49MHz / (rate * mclk), out)) { + *out |= I2S_SF_CLOCK_SOURCE_49MHz; + return 0; + } + } + return -1; +} + +#define CHECK_RATE(rate) \ + do { if (rates & SNDRV_PCM_RATE_ ##rate) { \ + int dummy; \ + if (clock_and_divisors(sysclock_factor, \ + bus_factor, rate, &dummy)) \ + rates &= ~SNDRV_PCM_RATE_ ##rate; \ + } } while (0) + +static int i2sbus_pcm_open(struct i2sbus_dev *i2sdev, int in) +{ + struct pcm_info *pi, *other; + struct soundbus_dev *sdev; + int masks_inited = 0, err; + struct codec_info_item *cii, *rev; + struct snd_pcm_hardware *hw; + u64 formats = 0; + unsigned int rates = 0; + struct transfer_info v; + int result = 0; + int bus_factor = 0, sysclock_factor = 0; + int found_this; + + mutex_lock(&i2sdev->lock); + + get_pcm_info(i2sdev, in, &pi, &other); + + hw = &pi->substream->runtime->hw; + sdev = &i2sdev->sound; + + if (pi->active) { + /* alsa messed up */ + result = -EBUSY; + goto out_unlock; + } + + /* we now need to assign the hw */ + list_for_each_entry(cii, &sdev->codec_list, list) { + struct transfer_info *ti = cii->codec->transfers; + bus_factor = cii->codec->bus_factor; + sysclock_factor = cii->codec->sysclock_factor; + while (ti->formats && ti->rates) { + v = *ti; + if (ti->transfer_in == in + && cii->codec->usable(cii, ti, &v)) { + if (masks_inited) { + formats &= v.formats; + rates &= v.rates; + } else { + formats = v.formats; + rates = v.rates; + masks_inited = 1; + } + } + ti++; + } + } + if (!masks_inited || !bus_factor || !sysclock_factor) { + result = -ENODEV; + goto out_unlock; + } + /* bus dependent stuff */ + hw->info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_RESUME; + + CHECK_RATE(5512); + CHECK_RATE(8000); + CHECK_RATE(11025); + CHECK_RATE(16000); + CHECK_RATE(22050); + CHECK_RATE(32000); + CHECK_RATE(44100); + CHECK_RATE(48000); + CHECK_RATE(64000); + CHECK_RATE(88200); + CHECK_RATE(96000); + CHECK_RATE(176400); + CHECK_RATE(192000); + hw->rates = rates; + + /* well. the codec might want 24 bits only, and we'll + * ever only transfer 24 bits, but they are top-aligned! + * So for alsa, we claim that we're doing full 32 bit + * while in reality we'll ignore the lower 8 bits of + * that when doing playback (they're transferred as 0 + * as far as I know, no codecs we have are 32-bit capable + * so I can't really test) and when doing recording we'll + * always have those lower 8 bits recorded as 0 */ + if (formats & SNDRV_PCM_FMTBIT_S24_BE) + formats |= SNDRV_PCM_FMTBIT_S32_BE; + if (formats & SNDRV_PCM_FMTBIT_U24_BE) + formats |= SNDRV_PCM_FMTBIT_U32_BE; + /* now mask off what we can support. I suppose we could + * also support S24_3LE and some similar formats, but I + * doubt there's a codec that would be able to use that, + * so we don't support it here. */ + hw->formats = formats & (SNDRV_PCM_FMTBIT_S16_BE | + SNDRV_PCM_FMTBIT_U16_BE | + SNDRV_PCM_FMTBIT_S32_BE | + SNDRV_PCM_FMTBIT_U32_BE); + + /* we need to set the highest and lowest rate possible. + * These are the highest and lowest rates alsa can + * support properly in its bitfield. + * Below, we'll use that to restrict to the rate + * currently in use (if any). */ + hw->rate_min = 5512; + hw->rate_max = 192000; + /* if the other stream is active, then we can only + * support what it is currently using. + * FIXME: I lied. This comment is wrong. We can support + * anything that works with the same serial format, ie. + * when recording 24 bit sound we can well play 16 bit + * sound at the same time iff using the same transfer mode. + */ + if (other->active) { + /* FIXME: is this guaranteed by the alsa api? */ + hw->formats &= (1ULL << i2sdev->format); + /* see above, restrict rates to the one we already have */ + hw->rate_min = i2sdev->rate; + hw->rate_max = i2sdev->rate; + } + + hw->channels_min = 2; + hw->channels_max = 2; + /* these are somewhat arbitrary */ + hw->buffer_bytes_max = 131072; + hw->period_bytes_min = 256; + hw->period_bytes_max = 16384; + hw->periods_min = 3; + hw->periods_max = MAX_DBDMA_COMMANDS; + list_for_each_entry(cii, &sdev->codec_list, list) { + if (cii->codec->open) { + err = cii->codec->open(cii, pi->substream); + if (err) { + result = err; + /* unwind */ + found_this = 0; + list_for_each_entry_reverse(rev, + &sdev->codec_list, list) { + if (found_this && rev->codec->close) { + rev->codec->close(rev, + pi->substream); + } + if (rev == cii) + found_this = 1; + } + goto out_unlock; + } + } + } + + out_unlock: + mutex_unlock(&i2sdev->lock); + return result; +} + +#undef CHECK_RATE + +static int i2sbus_pcm_close(struct i2sbus_dev *i2sdev, int in) +{ + struct codec_info_item *cii; + struct pcm_info *pi; + int err = 0, tmp; + + mutex_lock(&i2sdev->lock); + + get_pcm_info(i2sdev, in, &pi, NULL); + + list_for_each_entry(cii, &i2sdev->sound.codec_list, list) { + if (cii->codec->close) { + tmp = cii->codec->close(cii, pi->substream); + if (tmp) + err = tmp; + } + } + + pi->substream = NULL; + pi->active = 0; + mutex_unlock(&i2sdev->lock); + return err; +} + +static int i2sbus_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + return snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(params)); +} + +static int i2sbus_hw_free(struct snd_pcm_substream *substream) +{ + snd_pcm_lib_free_pages(substream); + return 0; +} + +static int i2sbus_pcm_prepare(struct i2sbus_dev *i2sdev, int in) +{ + /* whee. Hard work now. The user has selected a bitrate + * and bit format, so now we have to program our + * I2S controller appropriately. */ + struct snd_pcm_runtime *runtime; + struct dbdma_cmd *command; + int i, periodsize; + dma_addr_t offset; + struct bus_info bi; + struct codec_info_item *cii; + int sfr = 0; /* serial format register */ + int dws = 0; /* data word sizes reg */ + int input_16bit; + struct pcm_info *pi, *other; + int cnt; + int result = 0; + + mutex_lock(&i2sdev->lock); + + get_pcm_info(i2sdev, in, &pi, &other); + + if (pi->dbdma_ring.running) { + result = -EBUSY; + goto out_unlock; + } + + runtime = pi->substream->runtime; + pi->active = 1; + if (other->active && + ((i2sdev->format != runtime->format) + || (i2sdev->rate != runtime->rate))) { + result = -EINVAL; + goto out_unlock; + } + + i2sdev->format = runtime->format; + i2sdev->rate = runtime->rate; + + periodsize = snd_pcm_lib_period_bytes(pi->substream); + pi->current_period = 0; + + /* generate dbdma command ring first */ + command = pi->dbdma_ring.cmds; + offset = runtime->dma_addr; + for (i = 0; i < pi->substream->runtime->periods; + i++, command++, offset += periodsize) { + memset(command, 0, sizeof(struct dbdma_cmd)); + command->command = + cpu_to_le16((in ? INPUT_MORE : OUTPUT_MORE) | INTR_ALWAYS); + command->phy_addr = cpu_to_le32(offset); + command->req_count = cpu_to_le16(periodsize); + command->xfer_status = cpu_to_le16(0); + } + /* last one branches back to first */ + command--; + command->command |= cpu_to_le16(BR_ALWAYS); + command->cmd_dep = cpu_to_le32(pi->dbdma_ring.bus_cmd_start); + + /* ok, let's set the serial format and stuff */ + switch (runtime->format) { + /* 16 bit formats */ + case SNDRV_PCM_FORMAT_S16_BE: + case SNDRV_PCM_FORMAT_U16_BE: + /* FIXME: if we add different bus factors we need to + * do more here!! */ + bi.bus_factor = 0; + list_for_each_entry(cii, &i2sdev->sound.codec_list, list) { + bi.bus_factor = cii->codec->bus_factor; + break; + } + if (!bi.bus_factor) { + result = -ENODEV; + goto out_unlock; + } + input_16bit = 1; + break; + case SNDRV_PCM_FORMAT_S32_BE: + case SNDRV_PCM_FORMAT_U32_BE: + /* force 64x bus speed, otherwise the data cannot be + * transferred quickly enough! */ + bi.bus_factor = 64; + input_16bit = 0; + break; + default: + result = -EINVAL; + goto out_unlock; + } + /* we assume all sysclocks are the same! */ + list_for_each_entry(cii, &i2sdev->sound.codec_list, list) { + bi.sysclock_factor = cii->codec->sysclock_factor; + break; + } + + if (clock_and_divisors(bi.sysclock_factor, + bi.bus_factor, + runtime->rate, + &sfr) < 0) { + result = -EINVAL; + goto out_unlock; + } + switch (bi.bus_factor) { + case 32: + sfr |= I2S_SF_SERIAL_FORMAT_I2S_32X; + break; + case 64: + sfr |= I2S_SF_SERIAL_FORMAT_I2S_64X; + break; + } + /* FIXME: THIS ASSUMES MASTER ALL THE TIME */ + sfr |= I2S_SF_SCLK_MASTER; + + list_for_each_entry(cii, &i2sdev->sound.codec_list, list) { + int err = 0; + if (cii->codec->prepare) + err = cii->codec->prepare(cii, &bi, pi->substream); + if (err) { + result = err; + goto out_unlock; + } + } + /* codecs are fine with it, so set our clocks */ + if (input_16bit) + dws = (2 << I2S_DWS_NUM_CHANNELS_IN_SHIFT) | + (2 << I2S_DWS_NUM_CHANNELS_OUT_SHIFT) | + I2S_DWS_DATA_IN_16BIT | I2S_DWS_DATA_OUT_16BIT; + else + dws = (2 << I2S_DWS_NUM_CHANNELS_IN_SHIFT) | + (2 << I2S_DWS_NUM_CHANNELS_OUT_SHIFT) | + I2S_DWS_DATA_IN_24BIT | I2S_DWS_DATA_OUT_24BIT; + + /* early exit if already programmed correctly */ + /* not locking these is fine since we touch them only in this function */ + if (in_le32(&i2sdev->intfregs->serial_format) == sfr + && in_le32(&i2sdev->intfregs->data_word_sizes) == dws) + goto out_unlock; + + /* let's notify the codecs about clocks going away. + * For now we only do mastering on the i2s cell... */ + list_for_each_entry(cii, &i2sdev->sound.codec_list, list) + if (cii->codec->switch_clock) + cii->codec->switch_clock(cii, CLOCK_SWITCH_PREPARE_SLAVE); + + i2sbus_control_enable(i2sdev->control, i2sdev); + i2sbus_control_cell(i2sdev->control, i2sdev, 1); + + out_le32(&i2sdev->intfregs->intr_ctl, I2S_PENDING_CLOCKS_STOPPED); + + i2sbus_control_clock(i2sdev->control, i2sdev, 0); + + msleep(1); + + /* wait for clock stopped. This can apparently take a while... */ + cnt = 100; + while (cnt-- && + !(in_le32(&i2sdev->intfregs->intr_ctl) & I2S_PENDING_CLOCKS_STOPPED)) { + msleep(5); + } + out_le32(&i2sdev->intfregs->intr_ctl, I2S_PENDING_CLOCKS_STOPPED); + + /* not locking these is fine since we touch them only in this function */ + out_le32(&i2sdev->intfregs->serial_format, sfr); + out_le32(&i2sdev->intfregs->data_word_sizes, dws); + + i2sbus_control_enable(i2sdev->control, i2sdev); + i2sbus_control_cell(i2sdev->control, i2sdev, 1); + i2sbus_control_clock(i2sdev->control, i2sdev, 1); + msleep(1); + + list_for_each_entry(cii, &i2sdev->sound.codec_list, list) + if (cii->codec->switch_clock) + cii->codec->switch_clock(cii, CLOCK_SWITCH_SLAVE); + + out_unlock: + mutex_unlock(&i2sdev->lock); + return result; +} + +static struct dbdma_cmd STOP_CMD = { + .command = __constant_cpu_to_le16(DBDMA_STOP), +}; + +static int i2sbus_pcm_trigger(struct i2sbus_dev *i2sdev, int in, int cmd) +{ + struct codec_info_item *cii; + struct pcm_info *pi; + int timeout; + struct dbdma_cmd tmp; + int result = 0; + unsigned long flags; + + spin_lock_irqsave(&i2sdev->low_lock, flags); + + get_pcm_info(i2sdev, in, &pi, NULL); + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_RESUME: + if (pi->dbdma_ring.running) { + result = -EALREADY; + goto out_unlock; + } + list_for_each_entry(cii, &i2sdev->sound.codec_list, list) + if (cii->codec->start) + cii->codec->start(cii, pi->substream); + pi->dbdma_ring.running = 1; + + /* reset dma engine */ + out_le32(&pi->dbdma->control, + 0 | (RUN | PAUSE | FLUSH | WAKE) << 16); + timeout = 100; + while (in_le32(&pi->dbdma->status) & RUN && timeout--) + udelay(1); + if (timeout <= 0) { + printk(KERN_ERR + "i2sbus: error waiting for dma reset\n"); + result = -ENXIO; + goto out_unlock; + } + + /* write dma command buffer address to the dbdma chip */ + out_le32(&pi->dbdma->cmdptr, pi->dbdma_ring.bus_cmd_start); + /* post PCI write */ + mb(); + (void)in_le32(&pi->dbdma->status); + + /* change first command to STOP */ + tmp = *pi->dbdma_ring.cmds; + *pi->dbdma_ring.cmds = STOP_CMD; + + /* set running state, remember that the first command is STOP */ + out_le32(&pi->dbdma->control, RUN | (RUN << 16)); + timeout = 100; + /* wait for STOP to be executed */ + while (in_le32(&pi->dbdma->status) & ACTIVE && timeout--) + udelay(1); + if (timeout <= 0) { + printk(KERN_ERR "i2sbus: error waiting for dma stop\n"); + result = -ENXIO; + goto out_unlock; + } + /* again, write dma command buffer address to the dbdma chip, + * this time of the first real command */ + *pi->dbdma_ring.cmds = tmp; + out_le32(&pi->dbdma->cmdptr, pi->dbdma_ring.bus_cmd_start); + /* post write */ + mb(); + (void)in_le32(&pi->dbdma->status); + + /* reset dma engine again */ + out_le32(&pi->dbdma->control, + 0 | (RUN | PAUSE | FLUSH | WAKE) << 16); + timeout = 100; + while (in_le32(&pi->dbdma->status) & RUN && timeout--) + udelay(1); + if (timeout <= 0) { + printk(KERN_ERR + "i2sbus: error waiting for dma reset\n"); + result = -ENXIO; + goto out_unlock; + } + + /* wake up the chip with the next descriptor */ + out_le32(&pi->dbdma->control, + (RUN | WAKE) | ((RUN | WAKE) << 16)); + /* get the frame count */ + pi->frame_count = in_le32(&i2sdev->intfregs->frame_count); + + /* off you go! */ + break; + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_SUSPEND: + if (!pi->dbdma_ring.running) { + result = -EALREADY; + goto out_unlock; + } + + /* turn off all relevant bits */ + out_le32(&pi->dbdma->control, + (RUN | WAKE | FLUSH | PAUSE) << 16); + { + /* FIXME: move to own function */ + int timeout = 5000; + while ((in_le32(&pi->dbdma->status) & RUN) + && --timeout > 0) + udelay(1); + if (!timeout) + printk(KERN_ERR + "i2sbus: timed out turning " + "off dbdma engine!\n"); + } + + pi->dbdma_ring.running = 0; + list_for_each_entry(cii, &i2sdev->sound.codec_list, list) + if (cii->codec->stop) + cii->codec->stop(cii, pi->substream); + break; + default: + result = -EINVAL; + goto out_unlock; + } + + out_unlock: + spin_unlock_irqrestore(&i2sdev->low_lock, flags); + return result; +} + +static snd_pcm_uframes_t i2sbus_pcm_pointer(struct i2sbus_dev *i2sdev, int in) +{ + struct pcm_info *pi; + u32 fc; + + get_pcm_info(i2sdev, in, &pi, NULL); + + fc = in_le32(&i2sdev->intfregs->frame_count); + fc = fc - pi->frame_count; + + return (bytes_to_frames(pi->substream->runtime, + pi->current_period * + snd_pcm_lib_period_bytes(pi->substream)) + + fc) % pi->substream->runtime->buffer_size; +} + +static inline void handle_interrupt(struct i2sbus_dev *i2sdev, int in) +{ + struct pcm_info *pi; + u32 fc; + u32 delta; + + spin_lock(&i2sdev->low_lock); + get_pcm_info(i2sdev, in, &pi, NULL); + + if (!pi->dbdma_ring.running) { + /* there was still an interrupt pending + * while we stopped. or maybe another + * processor (not the one that was stopping + * the DMA engine) was spinning above + * waiting for the lock. */ + goto out_unlock; + } + + fc = in_le32(&i2sdev->intfregs->frame_count); + /* a counter overflow does not change the calculation. */ + delta = fc - pi->frame_count; + + /* update current_period */ + while (delta >= pi->substream->runtime->period_size) { + pi->current_period++; + delta = delta - pi->substream->runtime->period_size; + } + + if (unlikely(delta)) { + /* Some interrupt came late, so check the dbdma. + * This special case exists to syncronize the frame_count with + * the dbdma transfer, but is hit every once in a while. */ + int period; + + period = (in_le32(&pi->dbdma->cmdptr) + - pi->dbdma_ring.bus_cmd_start) + / sizeof(struct dbdma_cmd); + pi->current_period = pi->current_period + % pi->substream->runtime->periods; + + while (pi->current_period != period) { + pi->current_period++; + pi->current_period %= pi->substream->runtime->periods; + /* Set delta to zero, as the frame_count value is too + * high (otherwise the code path will not be executed). + * This corrects the fact that the frame_count is too + * low at the beginning due to buffering. */ + delta = 0; + } + } + + pi->frame_count = fc - delta; + pi->current_period %= pi->substream->runtime->periods; + + spin_unlock(&i2sdev->low_lock); + /* may call _trigger again, hence needs to be unlocked */ + snd_pcm_period_elapsed(pi->substream); + return; + out_unlock: + spin_unlock(&i2sdev->low_lock); +} + +irqreturn_t i2sbus_tx_intr(int irq, void *devid, struct pt_regs *regs) +{ + handle_interrupt((struct i2sbus_dev *)devid, 0); + return IRQ_HANDLED; +} + +irqreturn_t i2sbus_rx_intr(int irq, void *devid, struct pt_regs * regs) +{ + handle_interrupt((struct i2sbus_dev *)devid, 1); + return IRQ_HANDLED; +} + +static int i2sbus_playback_open(struct snd_pcm_substream *substream) +{ + struct i2sbus_dev *i2sdev = snd_pcm_substream_chip(substream); + + if (!i2sdev) + return -EINVAL; + i2sdev->out.substream = substream; + return i2sbus_pcm_open(i2sdev, 0); +} + +static int i2sbus_playback_close(struct snd_pcm_substream *substream) +{ + struct i2sbus_dev *i2sdev = snd_pcm_substream_chip(substream); + int err; + + if (!i2sdev) + return -EINVAL; + if (i2sdev->out.substream != substream) + return -EINVAL; + err = i2sbus_pcm_close(i2sdev, 0); + if (!err) + i2sdev->out.substream = NULL; + return err; +} + +static int i2sbus_playback_prepare(struct snd_pcm_substream *substream) +{ + struct i2sbus_dev *i2sdev = snd_pcm_substream_chip(substream); + + if (!i2sdev) + return -EINVAL; + if (i2sdev->out.substream != substream) + return -EINVAL; + return i2sbus_pcm_prepare(i2sdev, 0); +} + +static int i2sbus_playback_trigger(struct snd_pcm_substream *substream, int cmd) +{ + struct i2sbus_dev *i2sdev = snd_pcm_substream_chip(substream); + + if (!i2sdev) + return -EINVAL; + if (i2sdev->out.substream != substream) + return -EINVAL; + return i2sbus_pcm_trigger(i2sdev, 0, cmd); +} + +static snd_pcm_uframes_t i2sbus_playback_pointer(struct snd_pcm_substream + *substream) +{ + struct i2sbus_dev *i2sdev = snd_pcm_substream_chip(substream); + + if (!i2sdev) + return -EINVAL; + if (i2sdev->out.substream != substream) + return 0; + return i2sbus_pcm_pointer(i2sdev, 0); +} + +static struct snd_pcm_ops i2sbus_playback_ops = { + .open = i2sbus_playback_open, + .close = i2sbus_playback_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = i2sbus_hw_params, + .hw_free = i2sbus_hw_free, + .prepare = i2sbus_playback_prepare, + .trigger = i2sbus_playback_trigger, + .pointer = i2sbus_playback_pointer, +}; + +static int i2sbus_record_open(struct snd_pcm_substream *substream) +{ + struct i2sbus_dev *i2sdev = snd_pcm_substream_chip(substream); + + if (!i2sdev) + return -EINVAL; + i2sdev->in.substream = substream; + return i2sbus_pcm_open(i2sdev, 1); +} + +static int i2sbus_record_close(struct snd_pcm_substream *substream) +{ + struct i2sbus_dev *i2sdev = snd_pcm_substream_chip(substream); + int err; + + if (!i2sdev) + return -EINVAL; + if (i2sdev->in.substream != substream) + return -EINVAL; + err = i2sbus_pcm_close(i2sdev, 1); + if (!err) + i2sdev->in.substream = NULL; + return err; +} + +static int i2sbus_record_prepare(struct snd_pcm_substream *substream) +{ + struct i2sbus_dev *i2sdev = snd_pcm_substream_chip(substream); + + if (!i2sdev) + return -EINVAL; + if (i2sdev->in.substream != substream) + return -EINVAL; + return i2sbus_pcm_prepare(i2sdev, 1); +} + +static int i2sbus_record_trigger(struct snd_pcm_substream *substream, int cmd) +{ + struct i2sbus_dev *i2sdev = snd_pcm_substream_chip(substream); + + if (!i2sdev) + return -EINVAL; + if (i2sdev->in.substream != substream) + return -EINVAL; + return i2sbus_pcm_trigger(i2sdev, 1, cmd); +} + +static snd_pcm_uframes_t i2sbus_record_pointer(struct snd_pcm_substream + *substream) +{ + struct i2sbus_dev *i2sdev = snd_pcm_substream_chip(substream); + + if (!i2sdev) + return -EINVAL; + if (i2sdev->in.substream != substream) + return 0; + return i2sbus_pcm_pointer(i2sdev, 1); +} + +static struct snd_pcm_ops i2sbus_record_ops = { + .open = i2sbus_record_open, + .close = i2sbus_record_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = i2sbus_hw_params, + .hw_free = i2sbus_hw_free, + .prepare = i2sbus_record_prepare, + .trigger = i2sbus_record_trigger, + .pointer = i2sbus_record_pointer, +}; + +static void i2sbus_private_free(struct snd_pcm *pcm) +{ + struct i2sbus_dev *i2sdev = snd_pcm_chip(pcm); + struct codec_info_item *p, *tmp; + + i2sdev->sound.pcm = NULL; + i2sdev->out.created = 0; + i2sdev->in.created = 0; + list_for_each_entry_safe(p, tmp, &i2sdev->sound.codec_list, list) { + printk(KERN_ERR "i2sbus: a codec didn't unregister!\n"); + list_del(&p->list); + module_put(p->codec->owner); + kfree(p); + } + soundbus_dev_put(&i2sdev->sound); + module_put(THIS_MODULE); +} + +/* FIXME: this function needs an error handling strategy with labels */ +int +i2sbus_attach_codec(struct soundbus_dev *dev, struct snd_card *card, + struct codec_info *ci, void *data) +{ + int err, in = 0, out = 0; + struct transfer_info *tmp; + struct i2sbus_dev *i2sdev = soundbus_dev_to_i2sbus_dev(dev); + struct codec_info_item *cii; + + if (!dev->pcmname || dev->pcmid == -1) { + printk(KERN_ERR "i2sbus: pcm name and id must be set!\n"); + return -EINVAL; + } + + list_for_each_entry(cii, &dev->codec_list, list) { + if (cii->codec_data == data) + return -EALREADY; + } + + if (!ci->transfers || !ci->transfers->formats + || !ci->transfers->rates || !ci->usable) + return -EINVAL; + + /* we currently code the i2s transfer on the clock, and support only + * 32 and 64 */ + if (ci->bus_factor != 32 && ci->bus_factor != 64) + return -EINVAL; + + /* If you want to fix this, you need to keep track of what transport infos + * are to be used, which codecs they belong to, and then fix all the + * sysclock/busclock stuff above to depend on which is usable */ + list_for_each_entry(cii, &dev->codec_list, list) { + if (cii->codec->sysclock_factor != ci->sysclock_factor) { + printk(KERN_DEBUG + "cannot yet handle multiple different sysclocks!\n"); + return -EINVAL; + } + if (cii->codec->bus_factor != ci->bus_factor) { + printk(KERN_DEBUG + "cannot yet handle multiple different bus clocks!\n"); + return -EINVAL; + } + } + + tmp = ci->transfers; + while (tmp->formats && tmp->rates) { + if (tmp->transfer_in) + in = 1; + else + out = 1; + tmp++; + } + + cii = kzalloc(sizeof(struct codec_info_item), GFP_KERNEL); + if (!cii) { + printk(KERN_DEBUG "i2sbus: failed to allocate cii\n"); + return -ENOMEM; + } + + /* use the private data to point to the codec info */ + cii->sdev = soundbus_dev_get(dev); + cii->codec = ci; + cii->codec_data = data; + + if (!cii->sdev) { + printk(KERN_DEBUG + "i2sbus: failed to get soundbus dev reference\n"); + kfree(cii); + return -ENODEV; + } + + if (!try_module_get(THIS_MODULE)) { + printk(KERN_DEBUG "i2sbus: failed to get module reference!\n"); + soundbus_dev_put(dev); + kfree(cii); + return -EBUSY; + } + + if (!try_module_get(ci->owner)) { + printk(KERN_DEBUG + "i2sbus: failed to get module reference to codec owner!\n"); + module_put(THIS_MODULE); + soundbus_dev_put(dev); + kfree(cii); + return -EBUSY; + } + + if (!dev->pcm) { + err = snd_pcm_new(card, + dev->pcmname, + dev->pcmid, + 0, + 0, + &dev->pcm); + if (err) { + printk(KERN_DEBUG "i2sbus: failed to create pcm\n"); + kfree(cii); + module_put(ci->owner); + soundbus_dev_put(dev); + module_put(THIS_MODULE); + return err; + } + } + + /* ALSA yet again sucks. + * If it is ever fixed, remove this line. See below. */ + out = in = 1; + + if (!i2sdev->out.created && out) { + if (dev->pcm->card != card) { + /* eh? */ + printk(KERN_ERR + "Can't attach same bus to different cards!\n"); + module_put(ci->owner); + kfree(cii); + soundbus_dev_put(dev); + module_put(THIS_MODULE); + return -EINVAL; + } + if ((err = + snd_pcm_new_stream(dev->pcm, SNDRV_PCM_STREAM_PLAYBACK, 1))) { + module_put(ci->owner); + kfree(cii); + soundbus_dev_put(dev); + module_put(THIS_MODULE); + return err; + } + snd_pcm_set_ops(dev->pcm, SNDRV_PCM_STREAM_PLAYBACK, + &i2sbus_playback_ops); + i2sdev->out.created = 1; + } + + if (!i2sdev->in.created && in) { + if (dev->pcm->card != card) { + printk(KERN_ERR + "Can't attach same bus to different cards!\n"); + module_put(ci->owner); + kfree(cii); + soundbus_dev_put(dev); + module_put(THIS_MODULE); + return -EINVAL; + } + if ((err = + snd_pcm_new_stream(dev->pcm, SNDRV_PCM_STREAM_CAPTURE, 1))) { + module_put(ci->owner); + kfree(cii); + soundbus_dev_put(dev); + module_put(THIS_MODULE); + return err; + } + snd_pcm_set_ops(dev->pcm, SNDRV_PCM_STREAM_CAPTURE, + &i2sbus_record_ops); + i2sdev->in.created = 1; + } + + /* so we have to register the pcm after adding any substream + * to it because alsa doesn't create the devices for the + * substreams when we add them later. + * Therefore, force in and out on both busses (above) and + * register the pcm now instead of just after creating it. + */ + err = snd_device_register(card, dev->pcm); + if (err) { + printk(KERN_ERR "i2sbus: error registering new pcm\n"); + module_put(ci->owner); + kfree(cii); + soundbus_dev_put(dev); + module_put(THIS_MODULE); + return err; + } + /* no errors any more, so let's add this to our list */ + list_add(&cii->list, &dev->codec_list); + + dev->pcm->private_data = i2sdev; + dev->pcm->private_free = i2sbus_private_free; + + /* well, we really should support scatter/gather DMA */ + snd_pcm_lib_preallocate_pages_for_all( + dev->pcm, SNDRV_DMA_TYPE_DEV, + snd_dma_pci_data(macio_get_pci_dev(i2sdev->macio)), + 64 * 1024, 64 * 1024); + + return 0; +} + +void i2sbus_detach_codec(struct soundbus_dev *dev, void *data) +{ + struct codec_info_item *cii = NULL, *i; + + list_for_each_entry(i, &dev->codec_list, list) { + if (i->codec_data == data) { + cii = i; + break; + } + } + if (cii) { + list_del(&cii->list); + module_put(cii->codec->owner); + kfree(cii); + } + /* no more codecs, but still a pcm? */ + if (list_empty(&dev->codec_list) && dev->pcm) { + /* the actual cleanup is done by the callback above! */ + snd_device_free(dev->pcm->card, dev->pcm); + } +} |