diff options
Diffstat (limited to 'scripts')
-rw-r--r-- | scripts/link-vmlinux.sh | 211 |
1 files changed, 211 insertions, 0 deletions
diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh new file mode 100644 index 00000000000..26c5b658c2d --- /dev/null +++ b/scripts/link-vmlinux.sh @@ -0,0 +1,211 @@ +#!/bin/sh +# +# link vmlinux +# +# vmlinux is linked from the objects selected by $(KBUILD_VMLINUX_INIT) and +# $(KBUILD_VMLINUX_MAIN). Most are built-in.o files from top-level directories +# in the kernel tree, others are specified in arch/$(ARCH)/Makefile. +# Ordering when linking is important, and $(KBUILD_VMLINUX_INIT) must be first. +# +# vmlinux +# ^ +# | +# +-< $(KBUILD_VMLINUX_INIT) +# | +--< init/version.o + more +# | +# +--< $(KBUILD_VMLINUX_MAIN) +# | +--< drivers/built-in.o mm/built-in.o + more +# | +# +-< ${kallsymso} (see description in KALLSYMS section) +# +# vmlinux version (uname -v) cannot be updated during normal +# descending-into-subdirs phase since we do not yet know if we need to +# update vmlinux. +# Therefore this step is delayed until just before final link of vmlinux. +# +# System.map is generated to document addresses of all kernel symbols + +# Error out on error +set -e + +# Nice output in kbuild format +# Will be supressed by "make -s" +info() +{ + if [ "${quiet}" != "silent_" ]; then + printf " %-7s %s\n" ${1} ${2} + fi +} + +# Link of vmlinux.o used for section mismatch analysis +# ${1} output file +modpost_link() +{ + ${LD} ${LDFLAGS} -r -o ${1} ${KBUILD_VMLINUX_INIT} \ + --start-group ${KBUILD_VMLINUX_MAIN} --end-group +} + +# Link of vmlinux +# ${1} - optional extra .o files +# ${2} - output file +vmlinux_link() +{ + local lds="${objtree}/${KBUILD_LDS}" + + if [ "${SRCARCH}" != "um" ]; then + ${LD} ${LDFLAGS} ${LDFLAGS_vmlinux} -o ${2} \ + -T ${lds} ${KBUILD_VMLINUX_INIT} \ + --start-group ${KBUILD_VMLINUX_MAIN} --end-group ${1} + else + ${CC} ${CFLAGS_vmlinux} -o ${2} \ + -Wl,-T,${lds} ${KBUILD_VMLINUX_INIT} \ + -Wl,--start-group \ + ${KBUILD_VMLINUX_MAIN} \ + -Wl,--end-group \ + -lutil ${1} + rm -f linux + fi +} + + +# Create ${2} .o file with all symbols from the ${1} object file +kallsyms() +{ + info KSYM ${2} + local kallsymopt; + + if [ -n "${CONFIG_KALLSYMS_ALL}" ]; then + kallsymopt=--all-symbols + fi + + local aflags="${KBUILD_AFLAGS} ${NOSTDINC_FLAGS} \ + ${LINUXINCLUDE} ${KBUILD_CPPFLAGS}" + + ${NM} -n ${1} | \ + scripts/kallsyms ${kallsymopt} | \ + ${CC} ${aflags} -c -o ${2} -x assembler-with-cpp - +} + +# Create map file with all symbols from ${1} +# See mksymap for additional details +mksysmap() +{ + ${CONFIG_SHELL} "${srctree}/scripts/mksysmap" ${1} ${2} +} + +# Delete output files in case of error +trap cleanup SIGHUP SIGINT SIGQUIT SIGTERM ERR +cleanup() +{ + rm -f .old_version + rm -f .tmp_System.map + rm -f .tmp_kallsyms* + rm -f .tmp_version + rm -f .tmp_vmlinux* + rm -f System.map + rm -f vmlinux + rm -f vmlinux.o +} + +# +# +# Use "make V=1" to debug this script +case "${KBUILD_VERBOSE}" in +*1*) + set -x + ;; +esac + +if [ "$1" = "clean" ]; then + cleanup + exit 0 +fi + +# We need access to CONFIG_ symbols +. ./.config + +#link vmlinux.o +info LD vmlinux.o +modpost_link vmlinux.o + +# modpost vmlinux.o to check for section mismatches +${MAKE} -f "${srctree}/scripts/Makefile.modpost" vmlinux.o + +# Update version +info GEN .version +if [ ! -r .version ]; then + rm -f .version; + echo 1 >.version; +else + mv .version .old_version; + expr 0$(cat .old_version) + 1 >.version; +fi; + +# final build of init/ +${MAKE} -f "${srctree}/scripts/Makefile.build" obj=init + +kallsymso="" +kallsyms_vmlinux="" +if [ -n "${CONFIG_KALLSYMS}" ]; then + + # kallsyms support + # Generate section listing all symbols and add it into vmlinux + # It's a three step process: + # 1) Link .tmp_vmlinux1 so it has all symbols and sections, + # but __kallsyms is empty. + # Running kallsyms on that gives us .tmp_kallsyms1.o with + # the right size + # 2) Link .tmp_vmlinux2 so it now has a __kallsyms section of + # the right size, but due to the added section, some + # addresses have shifted. + # From here, we generate a correct .tmp_kallsyms2.o + # 2a) We may use an extra pass as this has been necessary to + # woraround some alignment related bugs. + # KALLSYMS_EXTRA_PASS=1 is used to trigger this. + # 3) The correct ${kallsymso} is linked into the final vmlinux. + # + # a) Verify that the System.map from vmlinux matches the map from + # ${kallsymso}. + + kallsymso=.tmp_kallsyms2.o + kallsyms_vmlinux=.tmp_vmlinux2 + + # step 1 + vmlinux_link "" .tmp_vmlinux1 + kallsyms .tmp_vmlinux1 .tmp_kallsyms1.o + + # step 2 + vmlinux_link .tmp_kallsyms1.o .tmp_vmlinux2 + kallsyms .tmp_vmlinux2 .tmp_kallsyms2.o + + # step 2a + if [ -n "${KALLSYMS_EXTRA_PASS}" ]; then + kallsymso=.tmp_kallsyms3.o + kallsyms_vmlinux=.tmp_vmlinux3 + + vmlinux_link .tmp_kallsyms2.o .tmp_vmlinux3 + + kallsyms .tmp_vmlinux3 .tmp_kallsyms3.o + fi +fi + +info LD vmlinux +vmlinux_link "${kallsymso}" vmlinux + +info SYSMAP System.map +mksysmap vmlinux System.map + +# step a (see comment above) +if [ -n "${CONFIG_KALLSYMS}" ]; then + mksysmap ${kallsyms_vmlinux} .tmp_System.map + + if ! cmp -s System.map .tmp_System.map; then + echo Inconsistent kallsyms data + echo echo Try "make KALLSYMS_EXTRA_PASS=1" as a workaround + cleanup + exit 1 + fi +fi + +# We made a new kernel - delete old version file +rm -f .old_version |