diff options
Diffstat (limited to 'net')
| -rw-r--r-- | net/dsa/Kconfig | 4 | ||||
| -rw-r--r-- | net/dsa/mv88e6131.c | 26 |
2 files changed, 23 insertions, 7 deletions
diff --git a/net/dsa/Kconfig b/net/dsa/Kconfig index 87bb5f4de0e..c53ded2a98d 100644 --- a/net/dsa/Kconfig +++ b/net/dsa/Kconfig @@ -41,12 +41,12 @@ config NET_DSA_MV88E6XXX_NEED_PPU default n config NET_DSA_MV88E6131 - bool "Marvell 88E6095/6095F/6131 ethernet switch chip support" + bool "Marvell 88E6085/6095/6095F/6131 ethernet switch chip support" select NET_DSA_MV88E6XXX select NET_DSA_MV88E6XXX_NEED_PPU select NET_DSA_TAG_DSA ---help--- - This enables support for the Marvell 88E6095/6095F/6131 + This enables support for the Marvell 88E6085/6095/6095F/6131 ethernet switch chips. config NET_DSA_MV88E6123_61_65 diff --git a/net/dsa/mv88e6131.c b/net/dsa/mv88e6131.c index 3da418894ef..45f7411e90b 100644 --- a/net/dsa/mv88e6131.c +++ b/net/dsa/mv88e6131.c @@ -207,8 +207,15 @@ static int mv88e6131_setup_port(struct dsa_switch *ds, int p) * mode, but do not enable forwarding of unknown unicasts. */ val = 0x0433; - if (p == dsa_upstream_port(ds)) + if (p == dsa_upstream_port(ds)) { val |= 0x0104; + /* + * On 6085, unknown multicast forward is controlled + * here rather than in Port Control 2 register. + */ + if (ps->id == ID_6085) + val |= 0x0008; + } if (ds->dsa_port_mask & (1 << p)) val |= 0x0100; REG_WRITE(addr, 0x04, val); @@ -251,10 +258,19 @@ static int mv88e6131_setup_port(struct dsa_switch *ds, int p) * If this is the upstream port for this switch, enable * forwarding of unknown multicast addresses. */ - val = 0x0080 | dsa_upstream_port(ds); - if (p == dsa_upstream_port(ds)) - val |= 0x0040; - REG_WRITE(addr, 0x08, val); + if (ps->id == ID_6085) + /* + * on 6085, bits 3:0 are reserved, bit 6 control ARP + * mirroring, and multicast forward is handled in + * Port Control register. + */ + REG_WRITE(addr, 0x08, 0x0080); + else { + val = 0x0080 | dsa_upstream_port(ds); + if (p == dsa_upstream_port(ds)) + val |= 0x0040; + REG_WRITE(addr, 0x08, val); + } /* * Rate Control: disable ingress rate limiting. |