diff options
Diffstat (limited to 'net/wireless/reg.c')
| -rw-r--r-- | net/wireless/reg.c | 1255 |
1 files changed, 981 insertions, 274 deletions
diff --git a/net/wireless/reg.c b/net/wireless/reg.c index bd0a16c3de5..6327e1617ac 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -41,38 +41,7 @@ #include <net/cfg80211.h> #include "core.h" #include "reg.h" - -/** - * struct regulatory_request - receipt of last regulatory request - * - * @wiphy: this is set if this request's initiator is - * %REGDOM_SET_BY_COUNTRY_IE or %REGDOM_SET_BY_DRIVER. This - * can be used by the wireless core to deal with conflicts - * and potentially inform users of which devices specifically - * cased the conflicts. - * @initiator: indicates who sent this request, could be any of - * of those set in reg_set_by, %REGDOM_SET_BY_* - * @alpha2: the ISO / IEC 3166 alpha2 country code of the requested - * regulatory domain. We have a few special codes: - * 00 - World regulatory domain - * 99 - built by driver but a specific alpha2 cannot be determined - * 98 - result of an intersection between two regulatory domains - * @intersect: indicates whether the wireless core should intersect - * the requested regulatory domain with the presently set regulatory - * domain. - * @country_ie_checksum: checksum of the last processed and accepted - * country IE - * @country_ie_env: lets us know if the AP is telling us we are outdoor, - * indoor, or if it doesn't matter - */ -struct regulatory_request { - struct wiphy *wiphy; - enum reg_set_by initiator; - char alpha2[2]; - bool intersect; - u32 country_ie_checksum; - enum environment_cap country_ie_env; -}; +#include "nl80211.h" /* Receipt of information from last regulatory request */ static struct regulatory_request *last_request; @@ -86,22 +55,63 @@ static u32 supported_bandwidths[] = { MHZ_TO_KHZ(20), }; -/* Central wireless core regulatory domains, we only need two, +/* + * Central wireless core regulatory domains, we only need two, * the current one and a world regulatory domain in case we have no - * information to give us an alpha2 */ -static const struct ieee80211_regdomain *cfg80211_regdomain; + * information to give us an alpha2 + */ +const struct ieee80211_regdomain *cfg80211_regdomain; -/* We use this as a place for the rd structure built from the +/* + * We use this as a place for the rd structure built from the * last parsed country IE to rest until CRDA gets back to us with - * what it thinks should apply for the same country */ + * what it thinks should apply for the same country + */ static const struct ieee80211_regdomain *country_ie_regdomain; +/* Used to queue up regulatory hints */ +static LIST_HEAD(reg_requests_list); +static spinlock_t reg_requests_lock; + +/* Used to queue up beacon hints for review */ +static LIST_HEAD(reg_pending_beacons); +static spinlock_t reg_pending_beacons_lock; + +/* Used to keep track of processed beacon hints */ +static LIST_HEAD(reg_beacon_list); + +struct reg_beacon { + struct list_head list; + struct ieee80211_channel chan; +}; + /* We keep a static world regulatory domain in case of the absence of CRDA */ static const struct ieee80211_regdomain world_regdom = { - .n_reg_rules = 1, + .n_reg_rules = 5, .alpha2 = "00", .reg_rules = { - REG_RULE(2412-10, 2462+10, 40, 6, 20, + /* IEEE 802.11b/g, channels 1..11 */ + REG_RULE(2412-10, 2462+10, 40, 6, 20, 0), + /* IEEE 802.11b/g, channels 12..13. No HT40 + * channel fits here. */ + REG_RULE(2467-10, 2472+10, 20, 6, 20, + NL80211_RRF_PASSIVE_SCAN | + NL80211_RRF_NO_IBSS), + /* IEEE 802.11 channel 14 - Only JP enables + * this and for 802.11b only */ + REG_RULE(2484-10, 2484+10, 20, 6, 20, + NL80211_RRF_PASSIVE_SCAN | + NL80211_RRF_NO_IBSS | + NL80211_RRF_NO_OFDM), + /* IEEE 802.11a, channel 36..48 */ + REG_RULE(5180-10, 5240+10, 40, 6, 20, + NL80211_RRF_PASSIVE_SCAN | + NL80211_RRF_NO_IBSS), + + /* NB: 5260 MHz - 5700 MHz requies DFS */ + + /* IEEE 802.11a, channel 149..165 */ + REG_RULE(5745-10, 5825+10, 40, 6, 20, NL80211_RRF_PASSIVE_SCAN | NL80211_RRF_NO_IBSS), } @@ -112,12 +122,19 @@ static const struct ieee80211_regdomain *cfg80211_world_regdom = #ifdef CONFIG_WIRELESS_OLD_REGULATORY static char *ieee80211_regdom = "US"; +#else +static char *ieee80211_regdom = "00"; +#endif + module_param(ieee80211_regdom, charp, 0444); MODULE_PARM_DESC(ieee80211_regdom, "IEEE 802.11 regulatory domain code"); -/* We assume 40 MHz bandwidth for the old regulatory work. +#ifdef CONFIG_WIRELESS_OLD_REGULATORY +/* + * We assume 40 MHz bandwidth for the old regulatory work. * We make emphasis we are using the exact same frequencies - * as before */ + * as before + */ static const struct ieee80211_regdomain us_regdom = { .n_reg_rules = 6, @@ -156,8 +173,10 @@ static const struct ieee80211_regdomain jp_regdom = { static const struct ieee80211_regdomain eu_regdom = { .n_reg_rules = 6, - /* This alpha2 is bogus, we leave it here just for stupid - * backward compatibility */ + /* + * This alpha2 is bogus, we leave it here just for stupid + * backward compatibility + */ .alpha2 = "EU", .reg_rules = { /* IEEE 802.11b/g, channels 1..13 */ @@ -226,8 +245,10 @@ static void reset_regdomains(void) cfg80211_regdomain = NULL; } -/* Dynamic world regulatory domain requested by the wireless - * core upon initialization */ +/* + * Dynamic world regulatory domain requested by the wireless + * core upon initialization + */ static void update_world_regdomain(const struct ieee80211_regdomain *rd) { BUG_ON(!last_request); @@ -268,8 +289,10 @@ static bool is_unknown_alpha2(const char *alpha2) { if (!alpha2) return false; - /* Special case where regulatory domain was built by driver - * but a specific alpha2 cannot be determined */ + /* + * Special case where regulatory domain was built by driver + * but a specific alpha2 cannot be determined + */ if (alpha2[0] == '9' && alpha2[1] == '9') return true; return false; @@ -279,9 +302,11 @@ static bool is_intersected_alpha2(const char *alpha2) { if (!alpha2) return false; - /* Special case where regulatory domain is the + /* + * Special case where regulatory domain is the * result of an intersection between two regulatory domain - * structures */ + * structures + */ if (alpha2[0] == '9' && alpha2[1] == '8') return true; return false; @@ -306,8 +331,10 @@ static bool alpha2_equal(const char *alpha2_x, const char *alpha2_y) return false; } -static bool regdom_changed(const char *alpha2) +static bool regdom_changes(const char *alpha2) { + assert_cfg80211_lock(); + if (!cfg80211_regdomain) return true; if (alpha2_equal(cfg80211_regdomain->alpha2, alpha2)) @@ -334,8 +361,10 @@ static bool country_ie_integrity_changes(u32 checksum) return false; } -/* This lets us keep regulatory code which is updated on a regulatory - * basis in userspace. */ +/* + * This lets us keep regulatory code which is updated on a regulatory + * basis in userspace. + */ static int call_crda(const char *alpha2) { char country_env[9 + 2] = "COUNTRY="; @@ -447,10 +476,12 @@ static bool freq_in_rule_band(const struct ieee80211_freq_range *freq_range, #undef ONE_GHZ_IN_KHZ } -/* Converts a country IE to a regulatory domain. A regulatory domain +/* + * Converts a country IE to a regulatory domain. A regulatory domain * structure has a lot of information which the IE doesn't yet have, * so for the other values we use upper max values as we will intersect - * with our userspace regulatory agent to get lower bounds. */ + * with our userspace regulatory agent to get lower bounds. + */ static struct ieee80211_regdomain *country_ie_2_rd( u8 *country_ie, u8 country_ie_len, @@ -495,9 +526,11 @@ static struct ieee80211_regdomain *country_ie_2_rd( *checksum ^= ((flags ^ alpha2[0] ^ alpha2[1]) << 8); - /* We need to build a reg rule for each triplet, but first we must + /* + * We need to build a reg rule for each triplet, but first we must * calculate the number of reg rules we will need. We will need one - * for each channel subband */ + * for each channel subband + */ while (country_ie_len >= 3) { int end_channel = 0; struct ieee80211_country_ie_triplet *triplet = @@ -535,9 +568,11 @@ static struct ieee80211_regdomain *country_ie_2_rd( if (cur_sub_max_channel < cur_channel) return NULL; - /* Do not allow overlapping channels. Also channels + /* + * Do not allow overlapping channels. Also channels * passed in each subband must be monotonically - * increasing */ + * increasing + */ if (last_sub_max_channel) { if (cur_channel <= last_sub_max_channel) return NULL; @@ -545,10 +580,12 @@ static struct ieee80211_regdomain *country_ie_2_rd( return NULL; } - /* When dot11RegulatoryClassesRequired is supported + /* + * When dot11RegulatoryClassesRequired is supported * we can throw ext triplets as part of this soup, * for now we don't care when those change as we - * don't support them */ + * don't support them + */ *checksum ^= ((cur_channel ^ cur_sub_max_channel) << 8) | ((cur_sub_max_channel ^ cur_sub_max_channel) << 16) | ((triplet->chans.max_power ^ cur_sub_max_channel) << 24); @@ -559,8 +596,10 @@ static struct ieee80211_regdomain *country_ie_2_rd( country_ie_len -= 3; num_rules++; - /* Note: this is not a IEEE requirement but - * simply a memory requirement */ + /* + * Note: this is not a IEEE requirement but + * simply a memory requirement + */ if (num_rules > NL80211_MAX_SUPP_REG_RULES) return NULL; } @@ -588,8 +627,10 @@ static struct ieee80211_regdomain *country_ie_2_rd( struct ieee80211_freq_range *freq_range = NULL; struct ieee80211_power_rule *power_rule = NULL; - /* Must parse if dot11RegulatoryClassesRequired is true, - * we don't support this yet */ + /* + * Must parse if dot11RegulatoryClassesRequired is true, + * we don't support this yet + */ if (triplet->ext.reg_extension_id >= IEEE80211_COUNTRY_EXTENSION_ID) { country_ie += 3; @@ -611,10 +652,12 @@ static struct ieee80211_regdomain *country_ie_2_rd( end_channel = triplet->chans.first_channel + (4 * (triplet->chans.num_channels - 1)); - /* The +10 is since the regulatory domain expects + /* + * The +10 is since the regulatory domain expects * the actual band edge, not the center of freq for * its start and end freqs, assuming 20 MHz bandwidth on - * the channels passed */ + * the channels passed + */ freq_range->start_freq_khz = MHZ_TO_KHZ(ieee80211_channel_to_frequency( triplet->chans.first_channel) - 10); @@ -622,9 +665,11 @@ static struct ieee80211_regdomain *country_ie_2_rd( MHZ_TO_KHZ(ieee80211_channel_to_frequency( end_channel) + 10); - /* Large arbitrary values, we intersect later */ - /* Increment this if we ever support >= 40 MHz channels - * in IEEE 802.11 */ + /* + * These are large arbitrary values we use to intersect later. + * Increment this if we ever support >= 40 MHz channels + * in IEEE 802.11 + */ freq_range->max_bandwidth_khz = MHZ_TO_KHZ(40); power_rule->max_antenna_gain = DBI_TO_MBI(100); power_rule->max_eirp = DBM_TO_MBM(100); @@ -640,8 +685,10 @@ static struct ieee80211_regdomain *country_ie_2_rd( } -/* Helper for regdom_intersect(), this does the real - * mathematical intersection fun */ +/* + * Helper for regdom_intersect(), this does the real + * mathematical intersection fun + */ static int reg_rules_intersect( const struct ieee80211_reg_rule *rule1, const struct ieee80211_reg_rule *rule2, @@ -719,11 +766,13 @@ static struct ieee80211_regdomain *regdom_intersect( if (!rd1 || !rd2) return NULL; - /* First we get a count of the rules we'll need, then we actually + /* + * First we get a count of the rules we'll need, then we actually * build them. This is to so we can malloc() and free() a * regdomain once. The reason we use reg_rules_intersect() here * is it will return -EINVAL if the rule computed makes no sense. - * All rules that do check out OK are valid. */ + * All rules that do check out OK are valid. + */ for (x = 0; x < rd1->n_reg_rules; x++) { rule1 = &rd1->reg_rules[x]; @@ -751,14 +800,18 @@ static struct ieee80211_regdomain *regdom_intersect( rule1 = &rd1->reg_rules[x]; for (y = 0; y < rd2->n_reg_rules; y++) { rule2 = &rd2->reg_rules[y]; - /* This time around instead of using the stack lets + /* + * This time around instead of using the stack lets * write to the target rule directly saving ourselves - * a memcpy() */ + * a memcpy() + */ intersected_rule = &rd->reg_rules[rule_idx]; r = reg_rules_intersect(rule1, rule2, intersected_rule); - /* No need to memset here the intersected rule here as - * we're not using the stack anymore */ + /* + * No need to memset here the intersected rule here as + * we're not using the stack anymore + */ if (r) continue; rule_idx++; @@ -777,8 +830,10 @@ static struct ieee80211_regdomain *regdom_intersect( return rd; } -/* XXX: add support for the rest of enum nl80211_reg_rule_flags, we may - * want to just have the channel structure use these */ +/* + * XXX: add support for the rest of enum nl80211_reg_rule_flags, we may + * want to just have the channel structure use these + */ static u32 map_regdom_flags(u32 rd_flags) { u32 channel_flags = 0; @@ -791,48 +846,45 @@ static u32 map_regdom_flags(u32 rd_flags) return channel_flags; } -/** - * freq_reg_info - get regulatory information for the given frequency - * @center_freq: Frequency in KHz for which we want regulatory information for - * @bandwidth: the bandwidth requirement you have in KHz, if you do not have one - * you can set this to 0. If this frequency is allowed we then set - * this value to the maximum allowed bandwidth. - * @reg_rule: the regulatory rule which we have for this frequency - * - * Use this function to get the regulatory rule for a specific frequency on - * a given wireless device. If the device has a specific regulatory domain - * it wants to follow we respect that unless a country IE has been received - * and processed already. - * - * Returns 0 if it was able to find a valid regulatory rule which does - * apply to the given center_freq otherwise it returns non-zero. It will - * also return -ERANGE if we determine the given center_freq does not even have - * a regulatory rule for a frequency range in the center_freq's band. See - * freq_in_rule_band() for our current definition of a band -- this is purely - * subjective and right now its 802.11 specific. - */ -static int freq_reg_info(u32 center_freq, u32 *bandwidth, - const struct ieee80211_reg_rule **reg_rule) +static int freq_reg_info_regd(struct wiphy *wiphy, + u32 center_freq, + u32 *bandwidth, + const struct ieee80211_reg_rule **reg_rule, + const struct ieee80211_regdomain *custom_regd) { int i; bool band_rule_found = false; + const struct ieee80211_regdomain *regd; u32 max_bandwidth = 0; - if (!cfg80211_regdomain) + regd = custom_regd ? custom_regd : cfg80211_regdomain; + + /* + * Follow the driver's regulatory domain, if present, unless a country + * IE has been processed or a user wants to help complaince further + */ + if (last_request->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE && + last_request->initiator != NL80211_REGDOM_SET_BY_USER && + wiphy->regd) + regd = wiphy->regd; + + if (!regd) return -EINVAL; - for (i = 0; i < cfg80211_regdomain->n_reg_rules; i++) { + for (i = 0; i < regd->n_reg_rules; i++) { const struct ieee80211_reg_rule *rr; const struct ieee80211_freq_range *fr = NULL; const struct ieee80211_power_rule *pr = NULL; - rr = &cfg80211_regdomain->reg_rules[i]; + rr = ®d->reg_rules[i]; fr = &rr->freq_range; pr = &rr->power_rule; - /* We only need to know if one frequency rule was + /* + * We only need to know if one frequency rule was * was in center_freq's band, that's enough, so lets - * not overwrite it once found */ + * not overwrite it once found + */ if (!band_rule_found) band_rule_found = freq_in_rule_band(fr, center_freq); @@ -850,6 +902,14 @@ static int freq_reg_info(u32 center_freq, u32 *bandwidth, return !max_bandwidth; } +EXPORT_SYMBOL(freq_reg_info); + +int freq_reg_info(struct wiphy *wiphy, u32 center_freq, u32 *bandwidth, + const struct ieee80211_reg_rule **reg_rule) +{ + return freq_reg_info_regd(wiphy, center_freq, + bandwidth, reg_rule, NULL); +} static void handle_channel(struct wiphy *wiphy, enum ieee80211_band band, unsigned int chan_idx) @@ -861,6 +921,11 @@ static void handle_channel(struct wiphy *wiphy, enum ieee80211_band band, const struct ieee80211_power_rule *power_rule = NULL; struct ieee80211_supported_band *sband; struct ieee80211_channel *chan; + struct wiphy *request_wiphy = NULL; + + assert_cfg80211_lock(); + + request_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx); sband = wiphy->bands[band]; BUG_ON(chan_idx >= sband->n_channels); @@ -868,11 +933,12 @@ static void handle_channel(struct wiphy *wiphy, enum ieee80211_band band, flags = chan->orig_flags; - r = freq_reg_info(MHZ_TO_KHZ(chan->center_freq), + r = freq_reg_info(wiphy, MHZ_TO_KHZ(chan->center_freq), &max_bandwidth, ®_rule); if (r) { - /* This means no regulatory rule was found in the country IE + /* + * This means no regulatory rule was found in the country IE * with a frequency range on the center_freq's band, since * IEEE-802.11 allows for a country IE to have a subset of the * regulatory information provided in a country we ignore @@ -883,7 +949,8 @@ static void handle_channel(struct wiphy *wiphy, enum ieee80211_band band, * http://tinyurl.com/11d-clarification */ if (r == -ERANGE && - last_request->initiator == REGDOM_SET_BY_COUNTRY_IE) { + last_request->initiator == + NL80211_REGDOM_SET_BY_COUNTRY_IE) { #ifdef CONFIG_CFG80211_REG_DEBUG printk(KERN_DEBUG "cfg80211: Leaving channel %d MHz " "intact on %s - no rule found in band on " @@ -891,10 +958,13 @@ static void handle_channel(struct wiphy *wiphy, enum ieee80211_band band, chan->center_freq, wiphy_name(wiphy)); #endif } else { - /* In this case we know the country IE has at least one reg rule - * for the band so we respect its band definitions */ + /* + * In this case we know the country IE has at least one reg rule + * for the band so we respect its band definitions + */ #ifdef CONFIG_CFG80211_REG_DEBUG - if (last_request->initiator == REGDOM_SET_BY_COUNTRY_IE) + if (last_request->initiator == + NL80211_REGDOM_SET_BY_COUNTRY_IE) printk(KERN_DEBUG "cfg80211: Disabling " "channel %d MHz on %s due to " "Country IE\n", @@ -908,6 +978,24 @@ static void handle_channel(struct wiphy *wiphy, enum ieee80211_band band, power_rule = ®_rule->power_rule; + if (last_request->initiator == NL80211_REGDOM_SET_BY_DRIVER && + request_wiphy && request_wiphy == wiphy && + request_wiphy->strict_regulatory) { + /* + * This gaurantees the driver's requested regulatory domain + * will always be used as a base for further regulatory + * settings + */ + chan->flags = chan->orig_flags = + map_regdom_flags(reg_rule->flags); + chan->max_antenna_gain = chan->orig_mag = + (int) MBI_TO_DBI(power_rule->max_antenna_gain); + chan->max_bandwidth = KHZ_TO_MHZ(max_bandwidth); + chan->max_power = chan->orig_mpwr = + (int) MBM_TO_DBM(power_rule->max_eirp); + return; + } + chan->flags = flags | map_regdom_flags(reg_rule->flags); chan->max_antenna_gain = min(chan->orig_mag, (int) MBI_TO_DBI(power_rule->max_antenna_gain)); @@ -931,116 +1019,513 @@ static void handle_band(struct wiphy *wiphy, enum ieee80211_band band) handle_channel(wiphy, band, i); } -static bool ignore_reg_update(struct wiphy *wiphy, enum reg_set_by setby) +static bool ignore_reg_update(struct wiphy *wiphy, + enum nl80211_reg_initiator initiator) { if (!last_request) return true; - if (setby == REGDOM_SET_BY_CORE && - wiphy->fw_handles_regulatory) + if (initiator == NL80211_REGDOM_SET_BY_CORE && + wiphy->custom_regulatory) + return true; + /* + * wiphy->regd will be set once the device has its own + * desired regulatory domain set + */ + if (wiphy->strict_regulatory && !wiphy->regd && + !is_world_regdom(last_request->alpha2)) return true; return false; } -static void update_all_wiphy_regulatory(enum reg_set_by setby) +static void update_all_wiphy_regulatory(enum nl80211_reg_initiator initiator) { struct cfg80211_registered_device *drv; list_for_each_entry(drv, &cfg80211_drv_list, list) - if (!ignore_reg_update(&drv->wiphy, setby)) - wiphy_update_regulatory(&drv->wiphy, setby); + wiphy_update_regulatory(&drv->wiphy, initiator); +} + +static void handle_reg_beacon(struct wiphy *wiphy, + unsigned int chan_idx, + struct reg_beacon *reg_beacon) +{ +#ifdef CONFIG_CFG80211_REG_DEBUG +#define REG_DEBUG_BEACON_FLAG(desc) \ + printk(KERN_DEBUG "cfg80211: Enabling " desc " on " \ + "frequency: %d MHz (Ch %d) on %s\n", \ + reg_beacon->chan.center_freq, \ + ieee80211_frequency_to_channel(reg_beacon->chan.center_freq), \ + wiphy_name(wiphy)); +#else +#define REG_DEBUG_BEACON_FLAG(desc) do {} while (0) +#endif + struct ieee80211_supported_band *sband; + struct ieee80211_channel *chan; + + assert_cfg80211_lock(); + + sband = wiphy->bands[reg_beacon->chan.band]; + chan = &sband->channels[chan_idx]; + + if (likely(chan->center_freq != reg_beacon->chan.center_freq)) + return; + + if (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN) { + chan->flags &= ~IEEE80211_CHAN_PASSIVE_SCAN; + REG_DEBUG_BEACON_FLAG("active scanning"); + } + + if (chan->flags & IEEE80211_CHAN_NO_IBSS) { + chan->flags &= ~IEEE80211_CHAN_NO_IBSS; + REG_DEBUG_BEACON_FLAG("beaconing"); + } + + chan->beacon_found = true; +#undef REG_DEBUG_BEACON_FLAG } -void wiphy_update_regulatory(struct wiphy *wiphy, enum reg_set_by setby) +/* + * Called when a scan on a wiphy finds a beacon on + * new channel + */ +static void wiphy_update_new_beacon(struct wiphy *wiphy, + struct reg_beacon *reg_beacon) +{ + unsigned int i; + struct ieee80211_supported_band *sband; + + assert_cfg80211_lock(); + + if (!wiphy->bands[reg_beacon->chan.band]) + return; + + sband = wiphy->bands[reg_beacon->chan.band]; + + for (i = 0; i < sband->n_channels; i++) + handle_reg_beacon(wiphy, i, reg_beacon); +} + +/* + * Called upon reg changes or a new wiphy is added + */ +static void wiphy_update_beacon_reg(struct wiphy *wiphy) +{ + unsigned int i; + struct ieee80211_supported_band *sband; + struct reg_beacon *reg_beacon; + + assert_cfg80211_lock(); + + if (list_empty(®_beacon_list)) + return; + + list_for_each_entry(reg_beacon, ®_beacon_list, list) { + if (!wiphy->bands[reg_beacon->chan.band]) + continue; + sband = wiphy->bands[reg_beacon->chan.band]; + for (i = 0; i < sband->n_channels; i++) + handle_reg_beacon(wiphy, i, reg_beacon); + } +} + +static bool reg_is_world_roaming(struct wiphy *wiphy) +{ + if (is_world_regdom(cfg80211_regdomain->alpha2) || + (wiphy->regd && is_world_regdom(wiphy->regd->alpha2))) + return true; + if (last_request->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE && + wiphy->custom_regulatory) + return true; + return false; +} + +/* Reap the advantages of previously found beacons */ +static void reg_process_beacons(struct wiphy *wiphy) +{ + if (!reg_is_world_roaming(wiphy)) + return; + wiphy_update_beacon_reg(wiphy); +} + +void wiphy_update_regulatory(struct wiphy *wiphy, + enum nl80211_reg_initiator initiator) { enum ieee80211_band band; + + if (ignore_reg_update(wiphy, initiator)) + goto out; for (band = 0; band < IEEE80211_NUM_BANDS; band++) { if (wiphy->bands[band]) handle_band(wiphy, band); - if (wiphy->reg_notifier) - wiphy->reg_notifier(wiphy, setby); } +out: + reg_process_beacons(wiphy); + if (wiphy->reg_notifier) + wiphy->reg_notifier(wiphy, last_request); } -/* Return value which can be used by ignore_request() to indicate - * it has been determined we should intersect two regulatory domains */ +static void handle_channel_custom(struct wiphy *wiphy, + enum ieee80211_band band, + unsigned int chan_idx, + const struct ieee80211_regdomain *regd) +{ + int r; + u32 max_bandwidth = 0; + const struct ieee80211_reg_rule *reg_rule = NULL; + const struct ieee80211_power_rule *power_rule = NULL; + struct ieee80211_supported_band *sband; + struct ieee80211_channel *chan; + + sband = wiphy->bands[band]; + BUG_ON(chan_idx >= sband->n_channels); + chan = &sband->channels[chan_idx]; + + r = freq_reg_info_regd(wiphy, MHZ_TO_KHZ(chan->center_freq), + &max_bandwidth, ®_rule, regd); + + if (r) { + chan->flags = IEEE80211_CHAN_DISABLED; + return; + } + + power_rule = ®_rule->power_rule; + + chan->flags |= map_regdom_flags(reg_rule->flags); + chan->max_antenna_gain = (int) MBI_TO_DBI(power_rule->max_antenna_gain); + chan->max_bandwidth = KHZ_TO_MHZ(max_bandwidth); + chan->max_power = (int) MBM_TO_DBM(power_rule->max_eirp); +} + +static void handle_band_custom(struct wiphy *wiphy, enum ieee80211_band band, + const struct ieee80211_regdomain *regd) +{ + unsigned int i; + struct ieee80211_supported_band *sband; + + BUG_ON(!wiphy->bands[band]); + sband = wiphy->bands[band]; + + for (i = 0; i < sband->n_channels; i++) + handle_channel_custom(wiphy, band, i, regd); +} + +/* Used by drivers prior to wiphy registration */ +void wiphy_apply_custom_regulatory(struct wiphy *wiphy, + const struct ieee80211_regdomain *regd) +{ + enum ieee80211_band band; + for (band = 0; band < IEEE80211_NUM_BANDS; band++) { + if (wiphy->bands[band]) + handle_band_custom(wiphy, band, regd); + } +} +EXPORT_SYMBOL(wiphy_apply_custom_regulatory); + +static int reg_copy_regd(const struct ieee80211_regdomain **dst_regd, + const struct ieee80211_regdomain *src_regd) +{ + struct ieee80211_regdomain *regd; + int size_of_regd = 0; + unsigned int i; + + size_of_regd = sizeof(struct ieee80211_regdomain) + + ((src_regd->n_reg_rules + 1) * sizeof(struct ieee80211_reg_rule)); + + regd = kzalloc(size_of_regd, GFP_KERNEL); + if (!regd) + return -ENOMEM; + + memcpy(regd, src_regd, sizeof(struct ieee80211_regdomain)); + + for (i = 0; i < src_regd->n_reg_rules; i++) + memcpy(®d->reg_rules[i], &src_regd->reg_rules[i], + sizeof(struct ieee80211_reg_rule)); + + *dst_regd = regd; + return 0; +} + +/* + * Return value which can be used by ignore_request() to indicate + * it has been determined we should intersect two regulatory domains + */ #define REG_INTERSECT 1 /* This has the logic which determines when a new request * should be ignored. */ -static int ignore_request(struct wiphy *wiphy, enum reg_set_by set_by, - const char *alpha2) +static int ignore_request(struct wiphy *wiphy, + struct regulatory_request *pending_request) { + struct wiphy *last_wiphy = NULL; + + assert_cfg80211_lock(); + /* All initial requests are respected */ if (!last_request) return 0; - switch (set_by) { - case REGDOM_SET_BY_INIT: + switch (pending_request->initiator) { + case NL80211_REGDOM_SET_BY_CORE: return -EINVAL; - case REGDOM_SET_BY_CORE: - /* - * Always respect new wireless core hints, should only happen - * when updating the world regulatory domain at init. - */ - return 0; - case REGDOM_SET_BY_COUNTRY_IE: - if (unlikely(!is_an_alpha2(alpha2))) + case NL80211_REGDOM_SET_BY_COUNTRY_IE: + + last_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx); + + if (unlikely(!is_an_alpha2(pending_request->alpha2))) return -EINVAL; - if (last_request->initiator == REGDOM_SET_BY_COUNTRY_IE) { - if (last_request->wiphy != wiphy) { + if (last_request->initiator == + NL80211_REGDOM_SET_BY_COUNTRY_IE) { + if (last_wiphy != wiphy) { /* * Two cards with two APs claiming different * different Country IE alpha2s. We could * intersect them, but that seems unlikely * to be correct. Reject second one for now. */ - if (!alpha2_equal(alpha2, - cfg80211_regdomain->alpha2)) + if (regdom_changes(pending_request->alpha2)) return -EOPNOTSUPP; return -EALREADY; } - /* Two consecutive Country IE hints on the same wiphy. - * This should be picked up early by the driver/stack */ - if (WARN_ON(!alpha2_equal(cfg80211_regdomain->alpha2, - alpha2))) + /* + * Two consecutive Country IE hints on the same wiphy. + * This should be picked up early by the driver/stack + */ + if (WARN_ON(regdom_changes(pending_request->alpha2))) return 0; return -EALREADY; } return REG_INTERSECT; - case REGDOM_SET_BY_DRIVER: - if (last_request->initiator == REGDOM_SET_BY_DRIVER) + case NL80211_REGDOM_SET_BY_DRIVER: + if (last_request->initiator == NL80211_REGDOM_SET_BY_CORE) { + if (is_old_static_regdom(cfg80211_regdomain)) + return 0; + if (regdom_changes(pending_request->alpha2)) + return 0; return -EALREADY; - return 0; - case REGDOM_SET_BY_USER: - if (last_request->initiator == REGDOM_SET_BY_COUNTRY_IE) + } + + /* + * This would happen if you unplug and plug your card + * back in or if you add a new device for which the previously + * loaded card also agrees on the regulatory domain. + */ + if (last_request->initiator == NL80211_REGDOM_SET_BY_DRIVER && + !regdom_changes(pending_request->alpha2)) + return -EALREADY; + + return REG_INTERSECT; + case NL80211_REGDOM_SET_BY_USER: + if (last_request->initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE) return REG_INTERSECT; - /* If the user knows better the user should set the regdom - * to their country before the IE is picked up */ - if (last_request->initiator == REGDOM_SET_BY_USER && + /* + * If the user knows better the user should set the regdom + * to their country before the IE is picked up + */ + if (last_request->initiator == NL80211_REGDOM_SET_BY_USER && last_request->intersect) return -EOPNOTSUPP; + /* + * Process user requests only after previous user/driver/core + * requests have been processed + */ + if (last_request->initiator == NL80211_REGDOM_SET_BY_CORE || + last_request->initiator == NL80211_REGDOM_SET_BY_DRIVER || + last_request->initiator == NL80211_REGDOM_SET_BY_USER) { + if (regdom_changes(last_request->alpha2)) + return -EAGAIN; + } + + if (!is_old_static_regdom(cfg80211_regdomain) && + !regdom_changes(pending_request->alpha2)) + return -EALREADY; + return 0; } return -EINVAL; } -/* Caller must hold &cfg80211_drv_mutex */ -int __regulatory_hint(struct wiphy *wiphy, enum reg_set_by set_by, - const char *alpha2, - u32 country_ie_checksum, - enum environment_cap env) +/** + * __regulatory_hint - hint to the wireless core a regulatory domain + * @wiphy: if the hint comes from country information from an AP, this + * is required to be set to the wiphy that received the information + * @pending_request: the regulatory request currently being processed + * + * The Wireless subsystem can use this function to hint to the wireless core + * what it believes should be the current regulatory domain. + * + * Returns zero if all went fine, %-EALREADY if a regulatory domain had + * already been set or other standard error codes. + * + * Caller must hold &cfg80211_mutex + */ +static int __regulatory_hint(struct wiphy *wiphy, + struct regulatory_request *pending_request) { - struct regulatory_request *request; bool intersect = false; int r = 0; - r = ignore_request(wiphy, set_by, alpha2); + assert_cfg80211_lock(); + + r = ignore_request(wiphy, pending_request); - if (r == REG_INTERSECT) + if (r == REG_INTERSECT) { + if (pending_request->initiator == + NL80211_REGDOM_SET_BY_DRIVER) { + r = reg_copy_regd(&wiphy->regd, cfg80211_regdomain); + if (r) { + kfree(pending_request); + return r; + } + } intersect = true; - else if (r) + } else if (r) { + /* + * If the regulatory domain being requested by the + * driver has already been set just copy it to the + * wiphy + */ + if (r == -EALREADY && + pending_request->initiator == + NL80211_REGDOM_SET_BY_DRIVER) { + r = reg_copy_regd(&wiphy->regd, cfg80211_regdomain); + if (r) { + kfree(pending_request); + return r; + } + r = -EALREADY; + goto new_request; + } + kfree(pending_request); + return r; + } + +new_request: + kfree(last_request); + + last_request = pending_request; + last_request->intersect = intersect; + + pending_request = NULL; + + /* When r == REG_INTERSECT we do need to call CRDA */ + if (r < 0) { + /* + * Since CRDA will not be called in this case as we already + * have applied the requested regulatory domain before we just + * inform userspace we have processed the request + */ + if (r == -EALREADY) + nl80211_send_reg_change_event(last_request); return r; + } + + return call_crda(last_request->alpha2); +} + +/* This currently only processes user and driver regulatory hints */ +static void reg_process_hint(struct regulatory_request *reg_request) +{ + int r = 0; + struct wiphy *wiphy = NULL; + + BUG_ON(!reg_request->alpha2); + + mutex_lock(&cfg80211_mutex); + + if (wiphy_idx_valid(reg_request->wiphy_idx)) + wiphy = wiphy_idx_to_wiphy(reg_request->wiphy_idx); + + if (reg_request->initiator == NL80211_REGDOM_SET_BY_DRIVER && + !wiphy) { + kfree(reg_request); + goto out; + } + + r = __regulatory_hint(wiphy, reg_request); + /* This is required so that the orig_* parameters are saved */ + if (r == -EALREADY && wiphy && wiphy->strict_regulatory) + wiphy_update_regulatory(wiphy, reg_request->initiator); +out: + mutex_unlock(&cfg80211_mutex); +} + +/* Processes regulatory hints, this is all the NL80211_REGDOM_SET_BY_* */ +static void reg_process_pending_hints(void) + { + struct regulatory_request *reg_request; + + spin_lock(®_requests_lock); + while (!list_empty(®_requests_list)) { + reg_request = list_first_entry(®_requests_list, + struct regulatory_request, + list); + list_del_init(®_request->list); + + spin_unlock(®_requests_lock); + reg_process_hint(reg_request); + spin_lock(®_requests_lock); + } + spin_unlock(®_requests_lock); +} + +/* Processes beacon hints -- this has nothing to do with country IEs */ +static void reg_process_pending_beacon_hints(void) +{ + struct cfg80211_registered_device *drv; + struct reg_beacon *pending_beacon, *tmp; + + mutex_lock(&cfg80211_mutex); + + /* This goes through the _pending_ beacon list */ + spin_lock_bh(®_pending_beacons_lock); + + if (list_empty(®_pending_beacons)) { + spin_unlock_bh(®_pending_beacons_lock); + goto out; + } + + list_for_each_entry_safe(pending_beacon, tmp, + ®_pending_beacons, list) { + + list_del_init(&pending_beacon->list); + + /* Applies the beacon hint to current wiphys */ + list_for_each_entry(drv, &cfg80211_drv_list, list) + wiphy_update_new_beacon(&drv->wiphy, pending_beacon); + + /* Remembers the beacon hint for new wiphys or reg changes */ + list_add_tail(& |