diff options
Diffstat (limited to 'net/mac80211/scan.c')
-rw-r--r-- | net/mac80211/scan.c | 126 |
1 files changed, 107 insertions, 19 deletions
diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index 85507bd9e34..e14c44195ae 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -14,6 +14,8 @@ #include <linux/if_arp.h> #include <linux/rtnetlink.h> +#include <linux/pm_qos_params.h> +#include <net/sch_generic.h> #include <linux/slab.h> #include <net/mac80211.h> @@ -83,7 +85,7 @@ ieee80211_bss_info_update(struct ieee80211_local *local, { struct cfg80211_bss *cbss; struct ieee80211_bss *bss; - int clen; + int clen, srlen; s32 signal = 0; if (local->hw.flags & IEEE80211_HW_SIGNAL_DBM) @@ -112,23 +114,24 @@ ieee80211_bss_info_update(struct ieee80211_local *local, bss->dtim_period = tim_ie->dtim_period; } - bss->supp_rates_len = 0; + /* replace old supported rates if we get new values */ + srlen = 0; if (elems->supp_rates) { - clen = IEEE80211_MAX_SUPP_RATES - bss->supp_rates_len; + clen = IEEE80211_MAX_SUPP_RATES; if (clen > elems->supp_rates_len) clen = elems->supp_rates_len; - memcpy(&bss->supp_rates[bss->supp_rates_len], elems->supp_rates, - clen); - bss->supp_rates_len += clen; + memcpy(bss->supp_rates, elems->supp_rates, clen); + srlen += clen; } if (elems->ext_supp_rates) { - clen = IEEE80211_MAX_SUPP_RATES - bss->supp_rates_len; + clen = IEEE80211_MAX_SUPP_RATES - srlen; if (clen > elems->ext_supp_rates_len) clen = elems->ext_supp_rates_len; - memcpy(&bss->supp_rates[bss->supp_rates_len], - elems->ext_supp_rates, clen); - bss->supp_rates_len += clen; + memcpy(bss->supp_rates + srlen, elems->ext_supp_rates, clen); + srlen += clen; } + if (srlen) + bss->supp_rates_len = srlen; bss->wmm_used = elems->wmm_param || elems->wmm_info; bss->uapsd_supported = is_uapsd_supported(elems); @@ -246,6 +249,8 @@ void ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted) struct ieee80211_local *local = hw_to_local(hw); bool was_hw_scan; + trace_api_scan_completed(local, aborted); + mutex_lock(&local->scan_mtx); /* @@ -322,6 +327,7 @@ static int ieee80211_start_sw_scan(struct ieee80211_local *local) ieee80211_offchannel_stop_beaconing(local); + local->leave_oper_channel_time = 0; local->next_scan_state = SCAN_DECISION; local->scan_channel_idx = 0; @@ -406,7 +412,7 @@ static int __ieee80211_start_scan(struct ieee80211_sub_if_data *sdata, if (local->ops->hw_scan) { WARN_ON(!ieee80211_prep_hw_scan(local)); - rc = drv_hw_scan(local, local->hw_scan_req); + rc = drv_hw_scan(local, sdata, local->hw_scan_req); } else rc = ieee80211_start_sw_scan(local); @@ -426,11 +432,28 @@ static int __ieee80211_start_scan(struct ieee80211_sub_if_data *sdata, return rc; } +static unsigned long +ieee80211_scan_get_channel_time(struct ieee80211_channel *chan) +{ + /* + * TODO: channel switching also consumes quite some time, + * add that delay as well to get a better estimation + */ + if (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN) + return IEEE80211_PASSIVE_CHANNEL_TIME; + return IEEE80211_PROBE_DELAY + IEEE80211_CHANNEL_TIME; +} + static int ieee80211_scan_state_decision(struct ieee80211_local *local, unsigned long *next_delay) { bool associated = false; + bool tx_empty = true; + bool bad_latency; + bool listen_int_exceeded; + unsigned long min_beacon_int = 0; struct ieee80211_sub_if_data *sdata; + struct ieee80211_channel *next_chan; /* if no more bands/channels left, complete scan and advance to the idle state */ if (local->scan_channel_idx >= local->scan_req->n_channels) { @@ -438,7 +461,11 @@ static int ieee80211_scan_state_decision(struct ieee80211_local *local, return 1; } - /* check if at least one STA interface is associated */ + /* + * check if at least one STA interface is associated, + * check if at least one STA interface has pending tx frames + * and grab the lowest used beacon interval + */ mutex_lock(&local->iflist_mtx); list_for_each_entry(sdata, &local->interfaces, list) { if (!ieee80211_sdata_running(sdata)) @@ -447,7 +474,16 @@ static int ieee80211_scan_state_decision(struct ieee80211_local *local, if (sdata->vif.type == NL80211_IFTYPE_STATION) { if (sdata->u.mgd.associated) { associated = true; - break; + + if (sdata->vif.bss_conf.beacon_int < + min_beacon_int || min_beacon_int == 0) + min_beacon_int = + sdata->vif.bss_conf.beacon_int; + + if (!qdisc_all_tx_empty(sdata->dev)) { + tx_empty = false; + break; + } } } } @@ -456,11 +492,34 @@ static int ieee80211_scan_state_decision(struct ieee80211_local *local, if (local->scan_channel) { /* * we're currently scanning a different channel, let's - * switch back to the operating channel now if at least - * one interface is associated. Otherwise just scan the - * next channel + * see if we can scan another channel without interfering + * with the current traffic situation. + * + * Since we don't know if the AP has pending frames for us + * we can only check for our tx queues and use the current + * pm_qos requirements for rx. Hence, if no tx traffic occurs + * at all we will scan as many channels in a row as the pm_qos + * latency allows us to. Additionally we also check for the + * currently negotiated listen interval to prevent losing + * frames unnecessarily. + * + * Otherwise switch back to the operating channel. */ - if (associated) + next_chan = local->scan_req->channels[local->scan_channel_idx]; + + bad_latency = time_after(jiffies + + ieee80211_scan_get_channel_time(next_chan), + local->leave_oper_channel_time + + usecs_to_jiffies(pm_qos_requirement(PM_QOS_NETWORK_LATENCY))); + + listen_int_exceeded = time_after(jiffies + + ieee80211_scan_get_channel_time(next_chan), + local->leave_oper_channel_time + + usecs_to_jiffies(min_beacon_int * 1024) * + local->hw.conf.listen_interval); + + if (associated && ( !tx_empty || bad_latency || + listen_int_exceeded)) local->next_scan_state = SCAN_ENTER_OPER_CHANNEL; else local->next_scan_state = SCAN_SET_CHANNEL; @@ -492,6 +551,9 @@ static void ieee80211_scan_state_leave_oper_channel(struct ieee80211_local *loca else *next_delay = HZ / 10; + /* remember when we left the operating channel */ + local->leave_oper_channel_time = jiffies; + /* advance to the next channel to be scanned */ local->next_scan_state = SCAN_SET_CHANNEL; } @@ -594,7 +656,7 @@ void ieee80211_scan_work(struct work_struct *work) } if (local->hw_scan_req) { - int rc = drv_hw_scan(local, local->hw_scan_req); + int rc = drv_hw_scan(local, sdata, local->hw_scan_req); mutex_unlock(&local->scan_mtx); if (rc) ieee80211_scan_completed(&local->hw, true); @@ -667,10 +729,12 @@ int ieee80211_request_scan(struct ieee80211_sub_if_data *sdata, } int ieee80211_request_internal_scan(struct ieee80211_sub_if_data *sdata, - const u8 *ssid, u8 ssid_len) + const u8 *ssid, u8 ssid_len, + struct ieee80211_channel *chan) { struct ieee80211_local *local = sdata->local; int ret = -EBUSY; + enum nl80211_band band; mutex_lock(&local->scan_mtx); @@ -678,6 +742,30 @@ int ieee80211_request_internal_scan(struct ieee80211_sub_if_data *sdata, if (local->scan_req) goto unlock; + /* fill internal scan request */ + if (!chan) { + int i, nchan = 0; + + for (band = 0; band < IEEE80211_NUM_BANDS; band++) { + if (!local->hw.wiphy->bands[band]) + continue; + for (i = 0; + i < local->hw.wiphy->bands[band]->n_channels; + i++) { + local->int_scan_req->channels[nchan] = + &local->hw.wiphy->bands[band]->channels[i]; + nchan++; + } + } + + local->int_scan_req->n_channels = nchan; + } else { + local->int_scan_req->channels[0] = chan; + local->int_scan_req->n_channels = 1; + } + + local->int_scan_req->ssids = &local->scan_ssid; + local->int_scan_req->n_ssids = 1; memcpy(local->int_scan_req->ssids[0].ssid, ssid, IEEE80211_MAX_SSID_LEN); local->int_scan_req->ssids[0].ssid_len = ssid_len; |