diff options
Diffstat (limited to 'kernel')
70 files changed, 10253 insertions, 3219 deletions
diff --git a/kernel/Makefile b/kernel/Makefile index 149e18ef1ab..057472fbc27 100644 --- a/kernel/Makefile +++ b/kernel/Makefile @@ -75,7 +75,7 @@ obj-$(CONFIG_AUDITSYSCALL) += auditsc.o obj-$(CONFIG_GCOV_KERNEL) += gcov/ obj-$(CONFIG_AUDIT_TREE) += audit_tree.o obj-$(CONFIG_KPROBES) += kprobes.o -obj-$(CONFIG_KGDB) += kgdb.o +obj-$(CONFIG_KGDB) += debug/ obj-$(CONFIG_DETECT_SOFTLOCKUP) += softlockup.o obj-$(CONFIG_DETECT_HUNG_TASK) += hung_task.o obj-$(CONFIG_GENERIC_HARDIRQS) += irq/ diff --git a/kernel/acct.c b/kernel/acct.c index e4c0e1fee9b..385b88461c2 100644 --- a/kernel/acct.c +++ b/kernel/acct.c @@ -216,7 +216,6 @@ static int acct_on(char *name) { struct file *file; struct vfsmount *mnt; - int error; struct pid_namespace *ns; struct bsd_acct_struct *acct = NULL; @@ -244,13 +243,6 @@ static int acct_on(char *name) } } - error = security_acct(file); - if (error) { - kfree(acct); - filp_close(file, NULL); - return error; - } - spin_lock(&acct_lock); if (ns->bacct == NULL) { ns->bacct = acct; @@ -281,7 +273,7 @@ static int acct_on(char *name) */ SYSCALL_DEFINE1(acct, const char __user *, name) { - int error; + int error = 0; if (!capable(CAP_SYS_PACCT)) return -EPERM; @@ -299,13 +291,11 @@ SYSCALL_DEFINE1(acct, const char __user *, name) if (acct == NULL) return 0; - error = security_acct(NULL); - if (!error) { - spin_lock(&acct_lock); - acct_file_reopen(acct, NULL, NULL); - spin_unlock(&acct_lock); - } + spin_lock(&acct_lock); + acct_file_reopen(acct, NULL, NULL); + spin_unlock(&acct_lock); } + return error; } diff --git a/kernel/cgroup.c b/kernel/cgroup.c index e9ec642932e..422cb19f156 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -2994,7 +2994,6 @@ static void cgroup_event_remove(struct work_struct *work) remove); struct cgroup *cgrp = event->cgrp; - /* TODO: check return code */ event->cft->unregister_event(cgrp, event->cft, event->eventfd); eventfd_ctx_put(event->eventfd); @@ -3615,7 +3614,7 @@ static void __init cgroup_init_subsys(struct cgroup_subsys *ss) * @ss: the subsystem to load * * This function should be called in a modular subsystem's initcall. If the - * subsytem is built as a module, it will be assigned a new subsys_id and set + * subsystem is built as a module, it will be assigned a new subsys_id and set * up for use. If the subsystem is built-in anyway, work is delegated to the * simpler cgroup_init_subsys. */ diff --git a/kernel/cgroup_freezer.c b/kernel/cgroup_freezer.c index e5c0244962b..ce71ed53e88 100644 --- a/kernel/cgroup_freezer.c +++ b/kernel/cgroup_freezer.c @@ -89,10 +89,10 @@ struct cgroup_subsys freezer_subsys; /* Locks taken and their ordering * ------------------------------ - * css_set_lock * cgroup_mutex (AKA cgroup_lock) - * task->alloc_lock (AKA task_lock) * freezer->lock + * css_set_lock + * task->alloc_lock (AKA task_lock) * task->sighand->siglock * * cgroup code forces css_set_lock to be taken before task->alloc_lock @@ -100,33 +100,38 @@ struct cgroup_subsys freezer_subsys; * freezer_create(), freezer_destroy(): * cgroup_mutex [ by cgroup core ] * - * can_attach(): - * cgroup_mutex + * freezer_can_attach(): + * cgroup_mutex (held by caller of can_attach) * - * cgroup_frozen(): + * cgroup_freezing_or_frozen(): * task->alloc_lock (to get task's cgroup) * * freezer_fork() (preserving fork() performance means can't take cgroup_mutex): - * task->alloc_lock (to get task's cgroup) * freezer->lock * sighand->siglock (if the cgroup is freezing) * * freezer_read(): * cgroup_mutex * freezer->lock + * write_lock css_set_lock (cgroup iterator start) + * task->alloc_lock * read_lock css_set_lock (cgroup iterator start) * * freezer_write() (freeze): * cgroup_mutex * freezer->lock + * write_lock css_set_lock (cgroup iterator start) + * task->alloc_lock * read_lock css_set_lock (cgroup iterator start) - * sighand->siglock + * sighand->siglock (fake signal delivery inside freeze_task()) * * freezer_write() (unfreeze): * cgroup_mutex * freezer->lock + * write_lock css_set_lock (cgroup iterator start) + * task->alloc_lock * read_lock css_set_lock (cgroup iterator start) - * task->alloc_lock (to prevent races with freeze_task()) + * task->alloc_lock (inside thaw_process(), prevents race with refrigerator()) * sighand->siglock */ static struct cgroup_subsys_state *freezer_create(struct cgroup_subsys *ss, diff --git a/kernel/compat.c b/kernel/compat.c index 7f40e9275fd..5adab05a317 100644 --- a/kernel/compat.c +++ b/kernel/compat.c @@ -495,29 +495,26 @@ asmlinkage long compat_sys_sched_getaffinity(compat_pid_t pid, unsigned int len, { int ret; cpumask_var_t mask; - unsigned long *k; - unsigned int min_length = cpumask_size(); - - if (nr_cpu_ids <= BITS_PER_COMPAT_LONG) - min_length = sizeof(compat_ulong_t); - if (len < min_length) + if ((len * BITS_PER_BYTE) < nr_cpu_ids) + return -EINVAL; + if (len & (sizeof(compat_ulong_t)-1)) return -EINVAL; if (!alloc_cpumask_var(&mask, GFP_KERNEL)) return -ENOMEM; ret = sched_getaffinity(pid, mask); - if (ret < 0) - goto out; + if (ret == 0) { + size_t retlen = min_t(size_t, len, cpumask_size()); - k = cpumask_bits(mask); - ret = compat_put_bitmap(user_mask_ptr, k, min_length * 8); - if (ret == 0) - ret = min_length; - -out: + if (compat_put_bitmap(user_mask_ptr, cpumask_bits(mask), retlen * 8)) + ret = -EFAULT; + else + ret = retlen; + } free_cpumask_var(mask); + return ret; } diff --git a/kernel/cpu.c b/kernel/cpu.c index 54577757477..3097382eb44 100644 --- a/kernel/cpu.c +++ b/kernel/cpu.c @@ -20,6 +20,20 @@ /* Serializes the updates to cpu_online_mask, cpu_present_mask */ static DEFINE_MUTEX(cpu_add_remove_lock); +/* + * The following two API's must be used when attempting + * to serialize the updates to cpu_online_mask, cpu_present_mask. + */ +void cpu_maps_update_begin(void) +{ + mutex_lock(&cpu_add_remove_lock); +} + +void cpu_maps_update_done(void) +{ + mutex_unlock(&cpu_add_remove_lock); +} + static __cpuinitdata RAW_NOTIFIER_HEAD(cpu_chain); /* If set, cpu_up and cpu_down will return -EBUSY and do nothing. @@ -27,6 +41,8 @@ static __cpuinitdata RAW_NOTIFIER_HEAD(cpu_chain); */ static int cpu_hotplug_disabled; +#ifdef CONFIG_HOTPLUG_CPU + static struct { struct task_struct *active_writer; struct mutex lock; /* Synchronizes accesses to refcount, */ @@ -41,8 +57,6 @@ static struct { .refcount = 0, }; -#ifdef CONFIG_HOTPLUG_CPU - void get_online_cpus(void) { might_sleep(); @@ -67,22 +81,6 @@ void put_online_cpus(void) } EXPORT_SYMBOL_GPL(put_online_cpus); -#endif /* CONFIG_HOTPLUG_CPU */ - -/* - * The following two API's must be used when attempting - * to serialize the updates to cpu_online_mask, cpu_present_mask. - */ -void cpu_maps_update_begin(void) -{ - mutex_lock(&cpu_add_remove_lock); -} - -void cpu_maps_update_done(void) -{ - mutex_unlock(&cpu_add_remove_lock); -} - /* * This ensures that the hotplug operation can begin only when the * refcount goes to zero. @@ -124,6 +122,12 @@ static void cpu_hotplug_done(void) cpu_hotplug.active_writer = NULL; mutex_unlock(&cpu_hotplug.lock); } + +#else /* #if CONFIG_HOTPLUG_CPU */ +static void cpu_hotplug_begin(void) {} +static void cpu_hotplug_done(void) {} +#endif /* #esle #if CONFIG_HOTPLUG_CPU */ + /* Need to know about CPUs going up/down? */ int __ref register_cpu_notifier(struct notifier_block *nb) { @@ -134,8 +138,29 @@ int __ref register_cpu_notifier(struct notifier_block *nb) return ret; } +static int __cpu_notify(unsigned long val, void *v, int nr_to_call, + int *nr_calls) +{ + int ret; + + ret = __raw_notifier_call_chain(&cpu_chain, val, v, nr_to_call, + nr_calls); + + return notifier_to_errno(ret); +} + +static int cpu_notify(unsigned long val, void *v) +{ + return __cpu_notify(val, v, -1, NULL); +} + #ifdef CONFIG_HOTPLUG_CPU +static void cpu_notify_nofail(unsigned long val, void *v) +{ + BUG_ON(cpu_notify(val, v)); +} + EXPORT_SYMBOL(register_cpu_notifier); void __ref unregister_cpu_notifier(struct notifier_block *nb) @@ -181,8 +206,7 @@ static int __ref take_cpu_down(void *_param) if (err < 0) return err; - raw_notifier_call_chain(&cpu_chain, CPU_DYING | param->mod, - param->hcpu); + cpu_notify(CPU_DYING | param->mod, param->hcpu); if (task_cpu(param->caller) == cpu) move_task_off_dead_cpu(cpu, param->caller); @@ -212,17 +236,14 @@ static int __ref _cpu_down(unsigned int cpu, int tasks_frozen) cpu_hotplug_begin(); set_cpu_active(cpu, false); - err = __raw_notifier_call_chain(&cpu_chain, CPU_DOWN_PREPARE | mod, - hcpu, -1, &nr_calls); - if (err == NOTIFY_BAD) { + err = __cpu_notify(CPU_DOWN_PREPARE | mod, hcpu, -1, &nr_calls); + if (err) { set_cpu_active(cpu, true); nr_calls--; - __raw_notifier_call_chain(&cpu_chain, CPU_DOWN_FAILED | mod, - hcpu, nr_calls, NULL); + __cpu_notify(CPU_DOWN_FAILED | mod, hcpu, nr_calls, NULL); printk("%s: attempt to take down CPU %u failed\n", __func__, cpu); - err = -EINVAL; goto out_release; } @@ -230,9 +251,7 @@ static int __ref _cpu_down(unsigned int cpu, int tasks_frozen) if (err) { set_cpu_active(cpu, true); /* CPU didn't die: tell everyone. Can't complain. */ - if (raw_notifier_call_chain(&cpu_chain, CPU_DOWN_FAILED | mod, - hcpu) == NOTIFY_BAD) - BUG(); + cpu_notify_nofail(CPU_DOWN_FAILED | mod, hcpu); goto out_release; } @@ -246,19 +265,14 @@ static int __ref _cpu_down(unsigned int cpu, int tasks_frozen) __cpu_die(cpu); /* CPU is completely dead: tell everyone. Too late to complain. */ - if (raw_notifier_call_chain(&cpu_chain, CPU_DEAD | mod, - hcpu) == NOTIFY_BAD) - BUG(); + cpu_notify_nofail(CPU_DEAD | mod, hcpu); check_for_tasks(cpu); out_release: cpu_hotplug_done(); - if (!err) { - if (raw_notifier_call_chain(&cpu_chain, CPU_POST_DEAD | mod, - hcpu) == NOTIFY_BAD) - BUG(); - } + if (!err) + cpu_notify_nofail(CPU_POST_DEAD | mod, hcpu); return err; } @@ -293,13 +307,11 @@ static int __cpuinit _cpu_up(unsigned int cpu, int tasks_frozen) return -EINVAL; cpu_hotplug_begin(); - ret = __raw_notifier_call_chain(&cpu_chain, CPU_UP_PREPARE | mod, hcpu, - -1, &nr_calls); - if (ret == NOTIFY_BAD) { + ret = __cpu_notify(CPU_UP_PREPARE | mod, hcpu, -1, &nr_calls); + if (ret) { nr_calls--; printk("%s: attempt to bring up CPU %u failed\n", __func__, cpu); - ret = -EINVAL; goto out_notify; } @@ -312,12 +324,11 @@ static int __cpuinit _cpu_up(unsigned int cpu, int tasks_frozen) set_cpu_active(cpu, true); /* Now call notifier in preparation. */ - raw_notifier_call_chain(&cpu_chain, CPU_ONLINE | mod, hcpu); + cpu_notify(CPU_ONLINE | mod, hcpu); out_notify: if (ret != 0) - __raw_notifier_call_chain(&cpu_chain, - CPU_UP_CANCELED | mod, hcpu, nr_calls, NULL); + __cpu_notify(CPU_UP_CANCELED | mod, hcpu, nr_calls, NULL); cpu_hotplug_done(); return ret; @@ -326,6 +337,12 @@ out_notify: int __cpuinit cpu_up(unsigned int cpu) { int err = 0; + +#ifdef CONFIG_MEMORY_HOTPLUG + int nid; + pg_data_t *pgdat; +#endif + if (!cpu_possible(cpu)) { printk(KERN_ERR "can't online cpu %d because it is not " "configured as may-hotadd at boot time\n", cpu); @@ -336,6 +353,28 @@ int __cpuinit cpu_up(unsigned int cpu) return -EINVAL; } +#ifdef CONFIG_MEMORY_HOTPLUG + nid = cpu_to_node(cpu); + if (!node_online(nid)) { + err = mem_online_node(nid); + if (err) + return err; + } + + pgdat = NODE_DATA(nid); + if (!pgdat) { + printk(KERN_ERR + "Can't online cpu %d due to NULL pgdat\n", cpu); + return -ENOMEM; + } + + if (pgdat->node_zonelists->_zonerefs->zone == NULL) { + mutex_lock(&zonelists_mutex); + build_all_zonelists(NULL); + mutex_unlock(&zonelists_mutex); + } +#endif + cpu_maps_update_begin(); if (cpu_hotplug_disabled) { @@ -453,7 +492,7 @@ void __cpuinit notify_cpu_starting(unsigned int cpu) if (frozen_cpus != NULL && cpumask_test_cpu(cpu, frozen_cpus)) val = CPU_STARTING_FROZEN; #endif /* CONFIG_PM_SLEEP_SMP */ - raw_notifier_call_chain(&cpu_chain, val, (void *)(long)cpu); + cpu_notify(val, (void *)(long)cpu); } #endif /* CONFIG_SMP */ diff --git a/kernel/cpuset.c b/kernel/cpuset.c index 9a50c5f6e72..02b9611eadd 100644 --- a/kernel/cpuset.c +++ b/kernel/cpuset.c @@ -946,16 +946,62 @@ static void cpuset_migrate_mm(struct mm_struct *mm, const nodemask_t *from, * In order to avoid seeing no nodes if the old and new nodes are disjoint, * we structure updates as setting all new allowed nodes, then clearing newly * disallowed ones. - * - * Called with task's alloc_lock held */ static void cpuset_change_task_nodemask(struct task_struct *tsk, nodemask_t *newmems) { +repeat: + /* + * Allow tasks that have access to memory reserves because they have + * been OOM killed to get memory anywhere. + */ + if (unlikely(test_thread_flag(TIF_MEMDIE))) + return; + if (current->flags & PF_EXITING) /* Let dying task have memory */ + return; + + task_lock(tsk); nodes_or(tsk->mems_allowed, tsk->mems_allowed, *newmems); - mpol_rebind_task(tsk, &tsk->mems_allowed); - mpol_rebind_task(tsk, newmems); + mpol_rebind_task(tsk, newmems, MPOL_REBIND_STEP1); + + + /* + * ensure checking ->mems_allowed_change_disable after setting all new + * allowed nodes. + * + * the read-side task can see an nodemask with new allowed nodes and + * old allowed nodes. and if it allocates page when cpuset clears newly + * disallowed ones continuous, it can see the new allowed bits. + * + * And if setting all new allowed nodes is after the checking, setting + * all new allowed nodes and clearing newly disallowed ones will be done + * continuous, and the read-side task may find no node to alloc page. + */ + smp_mb(); + + /* + * Allocation of memory is very fast, we needn't sleep when waiting + * for the read-side. + */ + while (ACCESS_ONCE(tsk->mems_allowed_change_disable)) { + task_unlock(tsk); + if (!task_curr(tsk)) + yield(); + goto repeat; + } + + /* + * ensure checking ->mems_allowed_change_disable before clearing all new + * disallowed nodes. + * + * if clearing newly disallowed bits before the checking, the read-side + * task may find no node to alloc page. + */ + smp_mb(); + + mpol_rebind_task(tsk, newmems, MPOL_REBIND_STEP2); tsk->mems_allowed = *newmems; + task_unlock(tsk); } /* @@ -978,9 +1024,7 @@ static void cpuset_change_nodemask(struct task_struct *p, cs = cgroup_cs(scan->cg); guarantee_online_mems(cs, newmems); - task_lock(p); cpuset_change_task_nodemask(p, newmems); - task_unlock(p); NODEMASK_FREE(newmems); @@ -1383,9 +1427,7 @@ static void cpuset_attach_task(struct task_struct *tsk, nodemask_t *to, err = set_cpus_allowed_ptr(tsk, cpus_attach); WARN_ON_ONCE(err); - task_lock(tsk); cpuset_change_task_nodemask(tsk, to); - task_unlock(tsk); cpuset_update_task_spread_flag(cs, tsk); } @@ -2427,7 +2469,8 @@ void cpuset_unlock(void) } /** - * cpuset_mem_spread_node() - On which node to begin search for a page + * cpuset_mem_spread_node() - On which node to begin search for a file page + * cpuset_slab_spread_node() - On which node to begin search for a slab page * * If a task is marked PF_SPREAD_PAGE or PF_SPREAD_SLAB (as for * tasks in a cpuset with is_spread_page or is_spread_slab set), @@ -2452,16 +2495,27 @@ void cpuset_unlock(void) * See kmem_cache_alloc_node(). */ -int cpuset_mem_spread_node(void) +static int cpuset_spread_node(int *rotor) { int node; - node = next_node(current->cpuset_mem_spread_rotor, current->mems_allowed); + node = next_node(*rotor, current->mems_allowed); if (node == MAX_NUMNODES) node = first_node(current->mems_allowed); - current->cpuset_mem_spread_rotor = node; + *rotor = node; return node; } + +int cpuset_mem_spread_node(void) +{ + return cpuset_spread_node(¤t->cpuset_mem_spread_rotor); +} + +int cpuset_slab_spread_node(void) +{ + return cpuset_spread_node(¤t->cpuset_slab_spread_rotor); +} + EXPORT_SYMBOL_GPL(cpuset_mem_spread_node); /** diff --git a/kernel/cred.c b/kernel/cred.c index 8f3672a58a1..a2d5504fbcc 100644 --- a/kernel/cred.c +++ b/kernel/cred.c @@ -347,66 +347,6 @@ struct cred *prepare_exec_creds(void) } /* - * prepare new credentials for the usermode helper dispatcher - */ -struct cred *prepare_usermodehelper_creds(void) -{ -#ifdef CONFIG_KEYS - struct thread_group_cred *tgcred = NULL; -#endif - struct cred *new; - -#ifdef CONFIG_KEYS - tgcred = kzalloc(sizeof(*new->tgcred), GFP_ATOMIC); - if (!tgcred) - return NULL; -#endif - - new = kmem_cache_alloc(cred_jar, GFP_ATOMIC); - if (!new) - goto free_tgcred; - - kdebug("prepare_usermodehelper_creds() alloc %p", new); - - memcpy(new, &init_cred, sizeof(struct cred)); - - atomic_set(&new->usage, 1); - set_cred_subscribers(new, 0); - get_group_info(new->group_info); - get_uid(new->user); - -#ifdef CONFIG_KEYS - new->thread_keyring = NULL; - new->request_key_auth = NULL; - new->jit_keyring = KEY_REQKEY_DEFL_DEFAULT; - - atomic_set(&tgcred->usage, 1); - spin_lock_init(&tgcred->lock); - new->tgcred = tgcred; -#endif - -#ifdef CONFIG_SECURITY - new->security = NULL; -#endif - if (security_prepare_creds(new, &init_cred, GFP_ATOMIC) < 0) - goto error; - validate_creds(new); - - BUG_ON(atomic_read(&new->usage) != 1); - return new; - -error: - put_cred(new); - return NULL; - -free_tgcred: -#ifdef CONFIG_KEYS - kfree(tgcred); -#endif - return NULL; -} - -/* * Copy credentials for the new process created by fork() * * We share if we can, but under some circumstances we have to generate a new @@ -522,8 +462,6 @@ int commit_creds(struct cred *new) #endif BUG_ON(atomic_read(&new->usage) < 1); - security_commit_creds(new, old); - get_cred(new); /* we will require a ref for the subj creds too */ /* dumpability changes */ diff --git a/kernel/debug/Makefile b/kernel/debug/Makefile new file mode 100644 index 00000000000..a85edc33998 --- /dev/null +++ b/kernel/debug/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the linux kernel debugger +# + +obj-$(CONFIG_KGDB) += debug_core.o gdbstub.o +obj-$(CONFIG_KGDB_KDB) += kdb/ diff --git a/kernel/debug/debug_core.c b/kernel/debug/debug_core.c new file mode 100644 index 00000000000..5cb7cd1de10 --- /dev/null +++ b/kernel/debug/debug_core.c @@ -0,0 +1,983 @@ +/* + * Kernel Debug Core + * + * Maintainer: Jason Wessel <jason.wessel@windriver.com> + * + * Copyright (C) 2000-2001 VERITAS Software Corporation. + * Copyright (C) 2002-2004 Timesys Corporation + * Copyright (C) 2003-2004 Amit S. Kale <amitkale@linsyssoft.com> + * Copyright (C) 2004 Pavel Machek <pavel@suse.cz> + * Copyright (C) 2004-2006 Tom Rini <trini@kernel.crashing.org> + * Copyright (C) 2004-2006 LinSysSoft Technologies Pvt. Ltd. + * Copyright (C) 2005-2009 Wind River Systems, Inc. + * Copyright (C) 2007 MontaVista Software, Inc. + * Copyright (C) 2008 Red Hat, Inc., Ingo Molnar <mingo@redhat.com> + * + * Contributors at various stages not listed above: + * Jason Wessel ( jason.wessel@windriver.com ) + * George Anzinger <george@mvista.com> + * Anurekh Saxena (anurekh.saxena@timesys.com) + * Lake Stevens Instrument Division (Glenn Engel) + * Jim Kingdon, Cygnus Support. + * + * Original KGDB stub: David Grothe <dave@gcom.com>, + * Tigran Aivazian <tigran@sco.com> + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ +#include <linux/pid_namespace.h> +#include <linux/clocksource.h> +#include <linux/interrupt.h> +#include <linux/spinlock.h> +#include <linux/console.h> +#include <linux/threads.h> +#include <linux/uaccess.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/ptrace.h> +#include <linux/string.h> +#include <linux/delay.h> +#include <linux/sched.h> +#include <linux/sysrq.h> +#include <linux/init.h> +#include <linux/kgdb.h> +#include <linux/kdb.h> +#include <linux/pid.h> +#include <linux/smp.h> +#include <linux/mm.h> + +#include <asm/cacheflush.h> +#include <asm/byteorder.h> +#include <asm/atomic.h> +#include <asm/system.h> + +#include "debug_core.h" + +static int kgdb_break_asap; + +struct debuggerinfo_struct kgdb_info[NR_CPUS]; + +/** + * kgdb_connected - Is a host GDB connected to us? + */ +int kgdb_connected; +EXPORT_SYMBOL_GPL(kgdb_connected); + +/* All the KGDB handlers are installed */ +int kgdb_io_module_registered; + +/* Guard for recursive entry */ +static int exception_level; + +struct kgdb_io *dbg_io_ops; +static DEFINE_SPINLOCK(kgdb_registration_lock); + +/* kgdb console driver is loaded */ +static int kgdb_con_registered; +/* determine if kgdb console output should be used */ +static int kgdb_use_con; +/* Flag for alternate operations for early debugging */ +bool dbg_is_early = true; +/* Next cpu to become the master debug core */ +int dbg_switch_cpu; + +/* Use kdb or gdbserver mode */ +int dbg_kdb_mode = 1; + +static int __init opt_kgdb_con(char *str) +{ + kgdb_use_con = 1; + return 0; +} + +early_param("kgdbcon", opt_kgdb_con); + +module_param(kgdb_use_con, int, 0644); + +/* + * Holds information about breakpoints in a kernel. These breakpoints are + * added and removed by gdb. + */ +static struct kgdb_bkpt kgdb_break[KGDB_MAX_BREAKPOINTS] = { + [0 ... KGDB_MAX_BREAKPOINTS-1] = { .state = BP_UNDEFINED } +}; + +/* + * The CPU# of the active CPU, or -1 if none: + */ +atomic_t kgdb_active = ATOMIC_INIT(-1); +EXPORT_SYMBOL_GPL(kgdb_active); + +/* + * We use NR_CPUs not PERCPU, in case kgdb is used to debug early + * bootup code (which might not have percpu set up yet): + */ +static atomic_t passive_cpu_wait[NR_CPUS]; +static atomic_t cpu_in_kgdb[NR_CPUS]; +static atomic_t kgdb_break_tasklet_var; +atomic_t kgdb_setting_breakpoint; + +struct task_struct *kgdb_usethread; +struct task_struct *kgdb_contthread; + +int kgdb_single_step; +static pid_t kgdb_sstep_pid; + +/* to keep track of the CPU which is doing the single stepping*/ +atomic_t kgdb_cpu_doing_single_step = ATOMIC_INIT(-1); + +/* + * If you are debugging a problem where roundup (the collection of + * all other CPUs) is a problem [this should be extremely rare], + * then use the nokgdbroundup option to avoid roundup. In that case + * the other CPUs might interfere with your debugging context, so + * use this with care: + */ +static int kgdb_do_roundup = 1; + +static int __init opt_nokgdbroundup(char *str) +{ + kgdb_do_roundup = 0; + + return 0; +} + +early_param("nokgdbroundup", opt_nokgdbroundup); + +/* + * Finally, some KGDB code :-) + */ + +/* + * Weak aliases for breakpoint management, + * can be overriden by architectures when needed: + */ +int __weak kgdb_arch_set_breakpoint(unsigned long addr, char *saved_instr) +{ + int err; + + err = probe_kernel_read(saved_instr, (char *)addr, BREAK_INSTR_SIZE); + if (err) + return err; + + return probe_kernel_write((char *)addr, arch_kgdb_ops.gdb_bpt_instr, + BREAK_INSTR_SIZE); +} + +int __weak kgdb_arch_remove_breakpoint(unsigned long addr, char *bundle) +{ + return probe_kernel_write((char *)addr, + (char *)bundle, BREAK_INSTR_SIZE); +} + +int __weak kgdb_validate_break_address(unsigned long addr) +{ + char tmp_variable[BREAK_INSTR_SIZE]; + int err; + /* Validate setting the breakpoint and then removing it. In the + * remove fails, the kernel needs to emit a bad message because we + * are deep trouble not being able to put things back the way we + * found them. + */ + err = kgdb_arch_set_breakpoint(addr, tmp_variable); + if (err) + return err; + err = kgdb_arch_remove_breakpoint(addr, tmp_variable); + if (err) + printk(KERN_ERR "KGDB: Critical breakpoint error, kernel " + "memory destroyed at: %lx", addr); + return err; +} + +unsigned long __weak kgdb_arch_pc(int exception, struct pt_regs *regs) +{ + return instruction_pointer(regs); +} + +int __weak kgdb_arch_init(void) +{ + return 0; +} + +int __weak kgdb_skipexception(int exception, struct pt_regs *regs) +{ + return 0; +} + +/** + * kgdb_disable_hw_debug - Disable hardware debugging while we in kgdb. + * @regs: Current &struct pt_regs. + * + * This function will be called if the particular architecture must + * disable hardware debugging while it is processing gdb packets or + * handling exception. + */ +void __weak kgdb_disable_hw_debug(struct pt_regs *regs) +{ +} + +/* + * Some architectures need cache flushes when we set/clear a + * breakpoint: + */ +static void kgdb_flush_swbreak_addr(unsigned long addr) +{ + if (!CACHE_FLUSH_IS_SAFE) + return; + + if (current->mm && current->mm->mmap_cache) { + flush_cache_range(current->mm->mmap_cache, + addr, addr + BREAK_INSTR_SIZE); + } + /* Force flush instruction cache if it was outside the mm */ + flush_icache_range(addr, addr + BREAK_INSTR_SIZE); +} + +/* + * SW breakpoint management: + */ +int dbg_activate_sw_breakpoints(void) +{ + unsigned long addr; + int error; + int ret = 0; + int i; + + for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) { + if (kgdb_break[i].state != BP_SET) + continue; + + addr = kgdb_break[i].bpt_addr; + error = kgdb_arch_set_breakpoint(addr, + kgdb_break[i].saved_instr); + if (error) { + ret = error; + printk(KERN_INFO "KGDB: BP install failed: %lx", addr); + continue; + } + + kgdb_flush_swbreak_addr(addr); + kgdb_break[i].state = BP_ACTIVE; + } + return ret; +} + +int dbg_set_sw_break(unsigned long addr) +{ + int err = kgdb_validate_break_address(addr); + int breakno = -1; + int i; + + if (err) + return err; + + for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) { + if ((kgdb_break[i].state == BP_SET) && + (kgdb_break[i].bpt_addr == addr)) + return -EEXIST; + } + for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) { + if (kgdb_break[i].state == BP_REMOVED && + kgdb_break[i].bpt_addr == addr) { + breakno = i; + break; + } + } + + if (breakno == -1) { + for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) { + if (kgdb_break[i].state == BP_UNDEFINED) { + breakno = i; + break; + } + } + } + + if (breakno == -1) + return -E2BIG; + + kgdb_break[breakno].state = BP_SET; + kgdb_break[breakno].type = BP_BREAKPOINT; + kgdb_break[breakno].bpt_addr = addr; + + return 0; +} + +int dbg_deactivate_sw_breakpoints(void) +{ + unsigned long addr; + int error; + int ret = 0; + int i; + + for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) { + if (kgdb_break[i].state != BP_ACTIVE) + continue; + addr = kgdb_break[i].bpt_addr; + error = kgdb_arch_remove_breakpoint(addr, + kgdb_break[i].saved_instr); + if (error) { + printk(KERN_INFO "KGDB: BP remove failed: %lx\n", addr); + ret = error; + } + + kgdb_flush_swbreak_addr(addr); + kgdb_break[i].state = BP_SET; + } + return ret; +} + +int dbg_remove_sw_break(unsigned long addr) +{ + int i; + + for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) { + if ((kgdb_break[i].state == BP_SET) && + (kgdb_break[i].bpt_addr == addr)) { + kgdb_break[i].state = BP_REMOVED; + return 0; + } + } + return -ENOENT; +} + +int kgdb_isremovedbreak(unsigned long addr) +{ + int i; + + for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) { + if ((kgdb_break[i].state == BP_REMOVED) && + (kgdb_break[i].bpt_addr == addr)) + return 1; + } + return 0; +} + +int dbg_remove_all_break(void) +{ + unsigned long addr; + int error; + int i; + + /* Clear memory breakpoints. */ + for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) { + if (kgdb_break[i].state != BP_ACTIVE) + goto setundefined; + addr = kgdb_break[i].bpt_addr; + error = kgdb_arch_remove_breakpoint(addr, + kgdb_break[i].saved_instr); + if (error) + printk(KERN_ERR "KGDB: breakpoint remove failed: %lx\n", + addr); +setundefined: + kgdb_break[i].state = BP_UNDEFINED; + } + + /* Clear hardware breakpoints. */ + if (arch_kgdb_ops.remove_all_hw_break) + arch_kgdb_ops.remove_all_hw_break(); + + return 0; +} + +/* + * Return true if there is a valid kgdb I/O module. Also if no + * debugger is attached a message can be printed to the console about + * waiting for the debugger to attach. + * + * The print_wait argument is only to be true when called from inside + * the core kgdb_handle_exception, because it will wait for the + * debugger to attach. + */ +static int kgdb_io_ready(int print_wait) +{ + if (!dbg_io_ops) + return 0; + if (kgdb_connected) + return 1; + if (atomic_read(&kgdb_setting_breakpoint)) + return 1; + if (print_wait) { +#ifdef CONFIG_KGDB_KDB + if (!dbg_kdb_mode) + printk(KERN_CRIT "KGDB: waiting... or $3#33 for KDB\n"); +#else + printk(KERN_CRIT "KGDB: Waiting for remote debugger\n"); +#endif + } + return 1; +} + +static int kgdb_reenter_check(struct kgdb_state *ks) +{ + unsigned long addr; + + if (atomic_read(&kgdb_active) != raw_smp_processor_id()) + return 0; + + /* Panic on recursive debugger calls: */ + exception_level++; + addr = kgdb_arch_pc(ks->ex_vector, ks->linux_regs); + dbg_deactivate_sw_breakpoints(); + + /* + * If the break point removed ok at the place exception + * occurred, try to recover and print a warning to the end + * user because the user planted a breakpoint in a place that + * KGDB needs in order to function. + */ + if (dbg_remove_sw_break(addr) == 0) { + exception_level = 0; + kgdb_skipexception(ks->ex_vector, ks->linux_regs); + dbg_activate_sw_breakpoints(); + printk(KERN_CRIT "KGDB: re-enter error: breakpoint removed %lx\n", + addr); + WARN_ON_ONCE(1); + + return 1; + } + dbg_remove_all_break(); + kgdb_skipexception(ks->ex_vector, ks->linux_regs); + + if (exception_level > 1) { + dump_stack(); + panic("Recursive entry to debugger"); + } + + printk(KERN_CRIT "KGDB: re-enter exception: ALL breakpoints killed\n"); +#ifdef CONFIG_KGDB_KDB + /* Allow kdb to debug itself one level */ + return 0; +#endif + dump_stack(); + panic("Recursive entry to debugger"); + + return 1; +} + +static void dbg_cpu_switch(int cpu, int next_cpu) +{ + /* Mark the cpu we are switching away from as a slave when it + * holds the kgdb_active token. This must be done so that the + * that all the cpus wait in for the debug core will not enter + * again as the master. */ + if (cpu == atomic_read(&kgdb_active)) { + kgdb_info[cpu].exception_state |= DCPU_IS_SLAVE; + kgdb_info[cpu].exception_state &= ~DCPU_WANT_MASTER; + } + kgdb_info[next_cpu].exception_state |= DCPU_NEXT_MASTER; +} + +static int kgdb_cpu_enter(struct kgdb_state *ks, struct pt_regs *regs) +{ + unsigned long flags; + int sstep_tries = 100; + int error; + int i, cpu; + int trace_on = 0; +acquirelock: + /* + * Interrupts will be restored by the 'trap return' code, except when + * single stepping. + */ + local_irq_save(flags); + + cpu = ks->cpu; + kgdb_info[cpu].debuggerinfo = regs; + kgdb_info[cpu].task = current; + kgdb_info[cpu].ret_state = 0; + kgdb_info[cpu].irq_depth = hardirq_count() >> HARDIRQ_SHIFT; + /* + * Make sure the above info reaches the primary CPU before + * our cpu_in_kgdb[] flag setting does: + */ + atomic_inc(&cpu_in_kgdb[cpu]); + + if (exception_level == 1) + goto cpu_master_loop; + + /* + * CPU will loop if it is a slave or request to become a kgdb + * master cpu and acquire the kgdb_active lock: + */ + while (1) { +cpu_loop: + if (kgdb_info[cpu].exception_state & DCPU_NEXT_MASTER) { + kgdb_info[cpu].exception_state &= ~DCPU_NEXT_MASTER; + goto cpu_master_loop; + } else if (kgdb_info[cpu].exception_state & DCPU_WANT_MASTER) { + if (atomic_cmpxchg(&kgdb_active, -1, cpu) == cpu) + break; + } else if (kgdb_info[cpu].exception_state & DCPU_IS_SLAVE) { + if (!atomic_read(&passive_cpu_wait[cpu])) + goto return_normal; + } else { +return_normal: + /* Return to normal operation by executing any + * hw breakpoint fixup. + */ + if (arch_kgdb_ops.correct_hw_break) + arch_kgdb_ops.correct_hw_break(); + if (trace_on) + tracing_on(); + atomic_dec(&cpu_in_kgdb[cpu]); + touch_softlockup_watchdog_sync(); + clocksource_touch_watchdog(); + local_irq_restore(flags); + return 0; + } + cpu_relax(); + } + + /* + * For single stepping, try to only enter on the processor + * that was single stepping. To gaurd against a deadlock, the + * kernel will only try for the value of sstep_tries before + * giving up and continuing on. + */ + if (atomic_read(&kgdb_cpu_doing_single_step) != -1 && + (kgdb_info[cpu].task && + kgdb_info[cpu].task->pid != kgdb_sstep_pid) && --sstep_tries) { + atomic_set(&kgdb_active, -1); + touch_softlockup_watchdog_sync(); + clocksource_touch_watchdog(); + local_irq_restore(flags); + + goto acquirelock; + } + + if (!kgdb_io_ready(1)) { + kgdb_info[cpu].ret_state = 1; + goto kgdb_restore; /* No I/O connection, resume the system */ + } + + /* + * Don't enter if we have hit a removed breakpoint. + */ + if (kgdb_skipexception(ks->ex_vector, ks->linux_regs)) + goto kgdb_restore; + + /* Call the I/O driver's pre_exception routine */ + if (dbg_io_ops->pre_exception) + dbg_io_ops->pre_exception(); + + kgdb_disable_hw_debug(ks->linux_regs); + + /* + * Get the passive CPU lock which will hold all the non-primary + * CPU in a spin state while the debugger is active + */ + if (!kgdb_single_step) { + for (i = 0; i < NR_CPUS; i++) + atomic_inc(&passive_cpu_wait[i]); + } + +#ifdef CONFIG_SMP + /* Signal the other CPUs to enter kgdb_wait() */ + if ((!kgdb_single_step) && kgdb_do_roundup) + kgdb_roundup_cpus(flags); +#endif + + /* + * Wait for the other CPUs to be notified and be waiting for us: + */ + for_each_online_cpu(i) { + while (kgdb_do_roundup && !atomic_read(&cpu_in_kgdb[i])) + cpu_relax(); + } + + /* + * At this point the primary processor is completely + * in the debugger and all secondary CPUs are quiescent + */ + dbg_deactivate_sw_breakpoints(); + kgdb_single_step = 0; + kgdb_contthread = current; + exception_level = 0; + trace_on = tracing_is_on(); + if (trace_on) + tracing_off(); + + while (1) { +cpu_master_loop: + if (dbg_kdb_mode) { + kgdb_connected = 1; + error = kdb_stub(ks); + } else { + error = gdb_serial_stub(ks); + } + + if (error == DBG_PASS_EVENT) { + dbg_kdb_mode = !dbg_kdb_mode; + kgdb_connected = 0; + } else if (error == DBG_SWITCH_CPU_EVENT) { + dbg_cpu_switch(cpu, dbg_switch_cpu); + goto cpu_loop; + } else { + kgdb_info[cpu].ret_state = error; + break; + } + } + + /* Call the I/O driver's post_exception routine */ + if (dbg_io_ops->post_exception) + dbg_io_ops->post_exception(); + + atomic_dec(&cpu_in_kgdb[ks->cpu]); + + if (!kgdb_single_step) { + for (i = NR_CPUS-1; i >= 0; i--) + atomic_dec(&passive_cpu_wait[i]); + /* + * Wait till all the CPUs have quit from the debugger, + * but allow a CPU that hit an exception and is + * waiting to become the master to remain in the debug + * core. + */ + for_each_online_cpu(i) { + while (kgdb_do_roundup && + atomic_read(&cpu_in_kgdb[i]) && + !(kgdb_info[i].exception_state & + DCPU_WANT_MASTER)) + cpu_relax(); + } + } + +kgdb_restore: + if (atomic_read(&kgdb_cpu_doing_single_step) != -1) { + int sstep_cpu = atomic_read(&kgdb_cpu_doing_single_step); + if (kgdb_info[sstep_cpu].task) + kgdb_sstep_pid = kgdb_info[sstep_cpu].task->pid; + else + kgdb_sstep_pid = 0; + } + if (trace_on) + tracing_on(); + /* Free kgdb_active */ + atomic_set(&kgdb_active, -1); + touch_softlockup_watchdog_sync(); + clocksource_touch_watchdog(); + local_irq_restore(flags); + + return kgdb_info[cpu].ret_state; +} + +/* + * kgdb_handle_exception() - main entry point from a kernel exception + * + * Locking hierarchy: + * interface locks, if any (begin_session) + * kgdb lock (kgdb_active) + */ +int +kgdb_handle_exception(int evector, int signo, int ecode, struct pt_regs *regs) +{ + struct kgdb_state kgdb_var; + struct kgdb_state *ks = &kgdb_var; + int ret; + + ks->cpu = raw_smp_processor_id(); + ks->ex_vector = evector; + ks->signo = signo; + ks->err_code = ecode; + ks->kgdb_usethreadid = 0; + ks->linux_regs = regs; + + if (kgdb_reenter_check(ks)) + return 0; /* Ouch, double exception ! */ + kgdb_info[ks->cpu].exception_state |= DCPU_WANT_MASTER; + ret = kgdb_cpu_enter(ks, regs); + kgdb_info[ks->cpu].exception_state &= ~(DCPU_WANT_MASTER | + DCPU_IS_SLAVE); + return ret; +} + +int kgdb_nmicallback(int cpu, void *regs) +{ +#ifdef CONFIG_SMP + struct kgdb_state kgdb_var; + struct kgdb_state *ks = &kgdb_var; + + memset(ks, 0, sizeof(struct kgdb_state)); + ks->cpu = cpu; + ks->linux_regs = regs; + + if (!atomic_read(&cpu_in_kgdb[cpu]) && + atomic_read(&kgdb_active) != -1 && + atomic_read(&kgdb_active) != cpu) { + kgdb_info[cpu].exception_state |= DCPU_IS_SLAVE; + kgdb_cpu_enter(ks, regs); + kgdb_info[cpu].exception_state &= ~DCPU_IS_SLAVE; + return 0; + } +#endif + return 1; +} + +static void kgdb_console_write(struct console *co, const char *s, + unsigned count) +{ + unsigned long flags; + + /* If we're debugging, or KGDB has not connected, don't try + * and print. */ + if (!kgdb_connected || atomic_read(&kgdb_active) != -1 || dbg_kdb_mode) + return; + + local_irq_save(flags); + gdbstub_msg_write(s, count); + local_irq_restore(flags); +} + +static struct console kgdbcons = { + .name = "kgdb", + .write = kgdb_console_write, + .flags = CON_PRINTBUFFER | CON_ENABLED, + .index = -1, +}; + +#ifdef CONFIG_MAGIC_SYSRQ +static void sysrq_handle_dbg(int key, struct tty_struct *tty) +{ + if (!dbg_io_ops) { + printk(KERN_CRIT "ERROR: No KGDB I/O module available\n"); + return; + } + if (!kgdb_connected) { +#ifdef CONFIG_KGDB_KDB + if (!dbg_kdb_mode) + printk(KERN_CRIT "KGDB or $3#33 for KDB\n"); +#else + printk(KERN_CRIT "Entering KGDB\n"); +#endif + } + + kgdb_breakpoint(); +} + +static struct sysrq_key_op sysrq_dbg_op = { + .handler = sysrq_handle_dbg, + .help_msg = "debug(G)", + .action_msg = "DEBUG", +}; +#endif + +static int kgdb_panic_event(struct notifier_block *self, + unsigned long val, + void *data) +{ + if (dbg_kdb_mode) + kdb_printf("PANIC: %s\n", (char *)data); + kgdb_breakpoint(); + return NOTIFY_DONE; +} + +static struct notifier_block kgdb_panic_event_nb = { + .notifier_call = kgdb_panic_event, + .priority = INT_MAX, +}; + +void __weak kgdb_arch_late(void) +{ +} + +void __init dbg_late_init(void) +{ + dbg_is_early = false; + if (kgdb_io_module_registered) + kgdb_arch_late(); + kdb_init(KDB_INIT_FULL); +} + +static void kgdb_register_callbacks(void) +{ + if (!kgdb_io_module_registered) { + kgdb_io_module_registered = 1; + kgdb_arch_init(); + if (!dbg_is_early) + kgdb_arch_late(); + atomic_notifier_chain_register(&panic_notifier_list, + &kgdb_panic_event_nb); +#ifdef CONFIG_MAGIC_SYSRQ + register_sysrq_key('g', &sysrq_dbg_op); +#endif + if (kgdb_use_con && !kgdb_con_registered) { + register_console(&kgdbcons); + kgdb_con_registered = 1; + } + } +} + +static void kgdb_unregister_callbacks(void) +{ + /* + * When this routine is called KGDB should unregister from the + * panic handler and clean up, making sure it is not handling any + * break exceptions at the time. + */ + if (kgdb_io_module_registered) { + kgdb_io_module_registered = 0; + atomic_notifier_chain_unregister(&panic_notifier_list, + &kgdb_panic_event_nb); + kgdb_arch_exit(); +#ifdef CONFIG_MAGIC_SYSRQ + unregister_sysrq_key('g', &sysrq_dbg_op); +#endif + if (kgdb_con_registered) { + unregister_console(&kgdbcons); + kgdb_con_registered = 0; + } + } +} + +/* + * There are times a tasklet needs to be used vs a compiled in + * break point so as to cause an exception outside a kgdb I/O module, + * such as is the case with kgdboe, where calling a breakpoint in the + * I/O driver itself would be fatal. + */ +static void kgdb_tasklet_bpt(unsigned long ing) +{ + kgdb_breakpoint(); + atomic_set(&kgdb_break_tasklet_var, 0); +} + +static DECLARE_TASKLET(kgdb_tasklet_breakpoint, kgdb_tasklet_bpt, 0); + +void kgdb_schedule_breakpoint(void) +{ + if (atomic_read(&kgdb_break_tasklet_var) || + atomic_read(&kgdb_active) != -1 || + atomic_read(&kgdb_setting_breakpoint)) + return; + atomic_inc(&kgdb_break_tasklet_var); + tasklet_schedule(&kgdb_tasklet_breakpoint); +} +EXPORT_SYMBOL_GPL(kgdb_schedule_breakpoint); + +static void kgdb_initial_breakpoint(void) +{ + kgdb_break_asap = 0; + + printk(KERN_CRIT "kgdb: Waiting for connection from remote gdb...\n"); + kgdb_breakpoint(); +} + +/** + * kgdb_register_io_module - register KGDB IO module + * @new_dbg_io_ops: the io ops vector + * + * Register it with the KGDB core. + */ +int kgdb_register_io_module(struct kgdb_io *new_dbg_io_ops) +{ + int err; + + spin_lock(&kgdb_registration_lock); + + if (dbg_io_ops) { + spin_unlock(&kgdb_registration_lock); + + printk(KERN_ERR "kgdb: Another I/O driver is already " + "registered with KGDB.\n"); + return -EBUSY; + } + + if (new_dbg_io_ops->init) { + err = new_dbg_io_ops->init(); + if (err) { + spin_unlock(&kgdb_registration_lock); + return err; + } + } + + dbg_io_ops = new_dbg_io_ops; + + spin_unlock(&kgdb_registration_lock); + + printk(KERN_INFO "kgdb: Registered I/O driver %s.\n", + new_dbg_io_ops->name); + + /* Arm KGDB now. */ + kgdb_register_callbacks(); + + if (kgdb_break_asap) + kgdb_initial_breakpoint(); + + return 0; +} +EXPORT_SYMBOL_GPL(kgdb_register_io_module); + +/** + * kkgdb_unregister_io_module - unregister KGDB IO module + * @old_dbg_io_ops: the io ops vector + * + * Unregister it with the KGDB core. + */ +void kgdb_unregister_io_module(struct kgdb_io *old_dbg_io_ops) +{ + BUG_ON(kgdb_connected); + + /* + * KGDB is no longer able to communicate out, so + * unregister our callbacks and reset state. + */ + kgdb_unregister_callbacks(); + + spin_lock(&kgdb_registration_lock); + + WARN_ON_ONCE(dbg_io_ops != old_dbg_io_ops); + dbg_io_ops = NULL; + + spin_unlock(&kgdb_registration_lock); + + printk(KERN_INFO + "kgdb: Unregistered I/O driver %s, debugger disabled.\n", + old_dbg_io_ops->name); +} +EXPORT_SYMBOL_GPL(kgdb_unregister_io_module); + +int dbg_io_get_char(void) +{ + int ret = dbg_io_ops->read_char(); + if (ret == NO_POLL_CHAR) + return -1; + if (!dbg_kdb_mode) + return ret; + if (ret == 127) + return 8; + return ret; +} + +/** + * kgdb_breakpoint - generate breakpoint exception + * + * This function will generate a breakpoint exception. It is used at the + * beginning of a program to sync up with a debugger and can be used + * otherwise as a quick means to stop program execution and "break" into + * the debugger. + */ +void kgdb_breakpoint(void) +{ + atomic_inc(&kgdb_setting_breakpoint); + wmb(); /* Sync point before breakpoint */ + arch_kgdb_breakpoint(); + wmb(); /* Sync point after breakpoint */ + atomic_dec(&kgdb_setting_breakpoint); +} +EXPORT_SYMBOL_GPL(kgdb_breakpoint); + +static int __init opt_kgdb_wait(char *str) +{ + kgdb_break_asap = 1; + + kdb_init(KDB_INIT_EARLY); + if (kgdb_io_module_registered) + kgdb_initial_breakpoint(); + + return 0; +} + +early_param("kgdbwait", opt_kgdb_wait); diff --git a/kernel/debug/debug_core.h b/kernel/debug/debug_core.h new file mode 100644 index 00000000000..c5d753d80f6 --- /dev/null +++ b/kernel/debug/debug_core.h @@ -0,0 +1,81 @@ +/* + * Created by: Jason Wessel <jason.wessel@windriver.com> + * + * Copyright (c) 2009 Wind River Systems, Inc. All Rights Reserved. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef _DEBUG_CORE_H_ +#define _DEBUG_CORE_H_ +/* + * These are the private implementation headers between the kernel + * debugger core and the debugger front end code. + */ + +/* kernel debug core data structures */ +struct kgdb_state { + int ex_vector; + int signo; + int err_code; + int cpu; + int pass_exception; + unsigned long thr_query; + unsigned long threadid; + long kgdb_usethreadid; + struct pt_regs *linux_regs; +}; + +/* Exception state values */ +#define DCPU_WANT_MASTER 0x1 /* Waiting to become a master kgdb cpu */ +#define DCPU_NEXT_MASTER 0x2 /* Transition from one master cpu to another */ +#define DCPU_IS_SLAVE 0x4 /* Slave cpu enter exception */ +#define DCPU_SSTEP 0x8 /* CPU is single stepping */ + +struct debuggerinfo_struct { + void *debuggerinfo; + struct task_struct *task; + int exception_state; + int ret_state; + int irq_depth; +}; + +extern struct debuggerinfo_struct kgdb_info[]; + +/* kernel debug core break point routines */ +extern int dbg_remove_all_break(void); +extern int dbg_set_sw_break(unsigned long addr); +extern int dbg_remove_sw_break(unsigned long addr); +extern int dbg_activate_sw_breakpoints(void); +extern int dbg_deactivate_sw_breakpoints(void); + +/* polled character access to i/o module */ +extern int dbg_io_get_char(void); + +/* stub return value for switching between the gdbstub and kdb */ +#define DBG_PASS_EVENT -12345 +/* Switch from one cpu to another */ +#define DBG_SWITCH_CPU_EVENT -123456 +extern int dbg_switch_cpu; + +/* gdbstub interface functions */ +extern int gdb_serial_stub(struct kgdb_state *ks); +extern void gdbstub_msg_write(const char *s, int len); + +/* gdbstub functions used for kdb <-> gdbstub transition */ +extern int gdbstub_state(struct kgdb_state *ks, char *cmd); +extern int dbg_kdb_mode; + +#ifdef CONFIG_KGDB_KDB +extern int kdb_stub(struct kgdb_state *ks); +extern int kdb_parse(const char *cmdstr); +#else /* ! CONFIG_KGDB_KDB */ +static inline int kdb_stub(struct kgdb_state *ks) +{ + return DBG_PASS_EVENT; +} +#endif /* CONFIG_KGDB_KDB */ + +#endif /* _DEBUG_CORE_H_ */ diff --git a/kernel/debug/gdbstub.c b/kernel/debug/gdbstub.c new file mode 100644 index 00000000000..4b17b326952 --- /dev/null +++ b/kernel/debug/gdbstub.c @@ -0,0 +1,1017 @@ +/* + * Kernel Debug Core + * + * Maintainer: Jason Wessel <jason.wessel@windriver.com> + * + * Copyright (C) 2000-2001 VERITAS Software Corporation. + * Copyright (C) 2002-2004 Timesys Corporation + * Copyright (C) 2003-2004 Amit S. Kale <amitkale@linsyssoft.com> + * Copyright (C) 2004 Pavel Machek <pavel@suse.cz> + * Copyright (C) 2004-2006 Tom Rini <trini@kernel.crashing.org> + * Copyright (C) 2004-2006 LinSysSoft Technologies Pvt. Ltd. + * Copyright (C) 2005-2009 Wind River Systems, Inc. + * Copyright (C) 2007 MontaVista Software, Inc. + * Copyright (C) 2008 Red Hat, Inc., Ingo Molnar <mingo@redhat.com> + * + * Contributors at various stages not listed above: + * Jason Wessel ( jason.wessel@windriver.com ) + * George Anzinger <george@mvista.com> + * Anurekh Saxena (anurekh.saxena@timesys.com) + * Lake Stevens Instrument Division (Glenn Engel) + * Jim Kingdon, Cygnus Support. + * + * Original KGDB stub: David Grothe <dave@gcom.com>, + * Tigran Aivazian <tigran@sco.com> + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/kgdb.h> +#include <linux/kdb.h> +#include <linux/reboot.h> +#include <linux/uaccess.h> +#include <asm/cacheflush.h> +#include <asm/unaligned.h> +#include "debug_core.h" + +#define KGDB_MAX_THREAD_QUERY 17 + +/* Our I/O buffers. */ +static char remcom_in_buffer[BUFMAX]; +static char remcom_out_buffer[BUFMAX]; + +/* Storage for the registers, in GDB format. */ +static unsigned long gdb_regs[(NUMREGBYTES + + sizeof(unsigned long) - 1) / + sizeof(unsigned long)]; + +/* + * GDB remote protocol parser: + */ + +static int hex(char ch) +{ + if ((ch >= 'a') && (ch <= 'f')) + return ch - 'a' + 10; + if ((ch >= '0') && (ch <= '9')) + return ch - '0'; + if ((ch >= 'A') && (ch <= 'F')) + return ch - 'A' + 10; + return -1; +} + +#ifdef CONFIG_KGDB_KDB +static int gdbstub_read_wait(void) +{ + int ret = -1; + int i; + + /* poll any additional I/O interfaces that are defined */ + while (ret < 0) + for (i = 0; kdb_poll_funcs[i] != NULL; i++) { + ret = kdb_poll_funcs[i](); + if (ret > 0) + break; + } + return ret; +} +#else +static int gdbstub_read_wait(void) +{ + int ret = dbg_io_ops->read_char(); + while (ret == NO_POLL_CHAR) + ret = dbg_io_ops->read_char(); + return ret; +} +#endif +/* scan for the sequence $<data>#<checksum> */ +static void get_packet(char *buffer) +{ + unsigned char checksum; + unsigned char xmitcsum; + int count; + char ch; + + do { + /* + * Spin and wait around for the start character, ignore all + * other characters: + */ + while ((ch = (gdbstub_read_wait())) != '$') + /* nothing */; + + kgdb_connected = 1; + checksum = 0; + xmitcsum = -1; + + count = 0; + + /* + * now, read until a # or end of buffer is found: + */ + while (count < (BUFMAX - 1)) { + ch = gdbstub_read_wait(); + if (ch == '#') + break; + checksum = checksum + ch; + buffer[count] = ch; + count = count + 1; + } + buffer[count] = 0; + + if (ch == '#') { + xmitcsum = hex(gdbstub_read_wait()) << 4; + xmitcsum += hex(gdbstub_read_wait()); + + if (checksum != xmitcsum) + /* failed checksum */ + dbg_io_ops->write_char('-'); + else + /* successful transfer */ + dbg_io_ops->write_char('+'); + if (dbg_io_ops->flush) + dbg_io_ops->flush(); + } + } while (checksum != xmitcsum); +} + +/* + * Send the packet in buffer. + * Check for gdb connection if asked for. + */ +static void put_packet(char *buffer) +{ + unsigned char checksum; + int count; + char ch; + + /* + * $<packet info>#<checksum>. + */ + while (1) { + dbg_io_ops->write_char('$'); + checksum = 0; + count = 0; + + while ((ch = buffer[count])) { + dbg_io_ops->write_char(ch); + checksum += ch; + count++; + } + + dbg_io_ops->write_char('#'); + dbg_io_ops->write_char(hex_asc_hi(checksum)); + dbg_io_ops->write_char(hex_asc_lo(checksum)); + if (dbg_io_ops->flush) + dbg_io_ops->flush(); + + /* Now see what we get in reply. */ + ch = gdbstub_read_wait(); + + if (ch == 3) + ch = gdbstub_read_wait(); + + /* If we get an ACK, we are done. */ + if (ch == '+') + return; + + /* + * If we get the start of another packet, this means + * that GDB is attempting to reconnect. We will NAK + * the packet being sent, and stop trying to send this + * packet. + */ + if (ch == '$') { + dbg_io_ops->write_char('-'); + if (dbg_io_ops->flush) + dbg_io_ops->flush(); + return; + } + } +} + +static char gdbmsgbuf[BUFMAX + 1]; + +void gdbstub_msg_write(const char *s, int len) +{ + char *bufptr; + int wcount; + int i; + + if (len == 0) + len = strlen(s); + + /* 'O'utput */ + gdbmsgbuf[0] = 'O'; + + /* Fill and send buffers... */ + while (len > 0) { + bufptr = gdbmsgbuf + 1; + + /* Calculate how many this time */ + if ((len << 1) > (BUFMAX - 2)) + wcount = (BUFMAX - 2) >> 1; + else + wcount = len; + + /* Pack in hex chars */ + for (i = 0; i < wcount; i++) + bufptr = pack_hex_byte(bufptr, s[i]); + *bufptr = '\0'; + + /* Move up */ + s += wcount; + len -= wcount; + + /* Write packet */ + put_packet(gdbmsgbuf); + } +} + +/* + * Convert the memory pointed to by mem into hex, placing result in + * buf. Return a pointer to the last char put in buf (null). May + * return an error. + */ +int kgdb_mem2hex(char *mem, char *buf, int count) +{ + char *tmp; + int err; + + /* + * We use the upper half of buf as an intermediate buffer for the + * raw memory copy. Hex conversion will work against this one. + */ + tmp = buf + count; + + err = probe_kernel_read(tmp, mem, count); + if (!err) { + while (count > 0) { + buf = pack_hex_byte(buf, *tmp); + tmp++; + count--; + } + + *buf = 0; + } + + return err; +} + +/* + * Convert the hex array pointed to by buf into binary to be placed in + * mem. Return a pointer to the character AFTER the last byte + * written. May return an error. + */ +int kgdb_hex2mem(char *buf, char *mem, int count) +{ + char *tmp_raw; + char *tmp_hex; + + /* + * We use the upper half of buf as an intermediate buffer for the + * raw memory that is converted from hex. + */ + tmp_raw = buf + count * 2; + + tmp_hex = tmp_raw - 1; + while (tmp_hex >= buf) { + tmp_raw--; + *tmp_raw = hex(*tmp_hex--); + *tmp_raw |= hex(*tmp_hex--) << 4; + } + + return probe_kernel_write(mem, tmp_raw, count); +} + +/* + * While we find nice hex chars, build a long_val. + * Return number of chars processed. + */ +int kgdb_hex2long(char **ptr, unsigned long *long_val) +{ + int hex_val; + int num = 0; + int negate = 0; + + *long_val = 0; + + if (**ptr == '-') { + negate = 1; + (*ptr)++; + } + while (**ptr) { + hex_val = hex(**ptr); + if (hex_val < 0) + break; + + *long_val = (*long_val << 4) | hex_val; + num++; + (*ptr)++; + } + + if (negate) + *long_val = -*long_val; + + return num; +} + +/* + * Copy the binary array pointed to by buf into mem. Fix $, #, and + * 0x7d escaped with 0x7d. Return -EFAULT on failure or 0 on success. + * The input buf is overwitten with the result to write to mem. + */ +static int kgdb_ebin2mem(char *buf, char *mem, int count) +{ + int size = 0; + char *c = buf; + + while (count-- > 0) { + c[size] = *buf++; + if (c[size] == 0x7d) + c[size] = *buf++ ^ 0x20; + size++; + } + + return probe_kernel_write(mem, c, size); +} + +/* Write memory due to an 'M' or 'X' packet. */ +static int write_mem_msg(int binary) +{ + char *ptr = &remcom_in_buffer[1]; + unsigned long addr; + unsigned long length; + int err; + + if (kgdb_hex2long(&ptr, &addr) > 0 && *(ptr++) == ',' && + kgdb_hex2long(&ptr, &length) > 0 && *(ptr++) == ':') { + if (binary) + err = kgdb_ebin2mem(ptr, (char *)addr, length); + else + err = kgdb_hex2mem(ptr, (char *)addr, length); + if (err) + return err; + if (CACHE_FLUSH_IS_SAFE) + flush_icache_range(addr, addr + length); + return 0; + } + + return -EINVAL; +} + +static void error_packet(char *pkt, int error) +{ + error = -error; + pkt[0] = 'E'; + pkt[1] = hex_asc[(error / 10)]; + pkt[2] = hex_asc[(error % 10)]; + pkt[3] = '\0'; +} + +/* + * Thread ID accessors. We represent a flat TID space to GDB, where + * the per CPU idle threads (which under Linux all have PID 0) are + * remapped to negative TIDs. + */ + +#define BUF_THREAD_ID_SIZE 16 + +static char *pack_threadid(char *pkt, unsigned char *id) +{ + char *limit; + + limit = pkt + BUF_THREAD_ID_SIZE; + while (pkt < limit) + pkt = pack_hex_byte(pkt, *id++); + + return pkt; +} + +static void int_to_threadref(unsigned char *id, int value) +{ + unsigned char *scan; + int i = 4; + + scan = (unsigned char *)id; + while (i--) + *scan++ = 0; + put_unaligned_be32(value, scan); +} + +static struct task_struct *getthread(struct pt_regs *regs, int tid) +{ + /* + * Non-positive TIDs are remapped to the cpu shadow information + */ + if (tid == 0 || tid == -1) + tid = -atomic_read(&kgdb_active) - 2; + if (tid < -1 && tid > -NR_CPUS - 2) { + if (kgdb_info[-tid - 2].task) + return kgdb_info[-tid - 2].task; + else + return idle_task(-tid - 2); + } + if (tid <= 0) { + printk(KERN_ERR "KGDB: Internal thread select error\n"); + dump_stack(); + return NULL; + } + + /* + * find_task_by_pid_ns() does not take the tasklist lock anymore + * but is nicely RCU locked - hence is a pretty resilient + * thing to use: + */ + return find_task_by_pid_ns(tid, &init_pid_ns); +} + + +/* + * Remap normal tasks to their real PID, + * CPU shadow threads are mapped to -CPU - 2 + */ +static inline int shadow_pid(int realpid) +{ + if (realpid) + return realpid; + + return -raw_smp_processor_id() - 2; +} + +/* + * All the functions that start with gdb_cmd are the various + * operations to implement the handlers for the gdbserial protocol + * where KGDB is communicating with an external debugger + */ + +/* Handle the '?' status packets */ +static void gdb_cmd_status(struct kgdb_state *ks) +{ + /* + * We know that this packet is only sent + * during initial connect. So to be safe, + * we clear out our breakpoints now in case + * GDB is reconnecting. + */ + dbg_remove_all_break(); + + remcom_out_buffer[0] = 'S'; + pack_hex_byte(&remcom_out_buffer[1], ks->signo); +} + +/* Handle the 'g' get registers request */ +static void gdb_cmd_getregs(struct kgdb_state *ks) +{ + struct task_struct *thread; + void *local_debuggerinfo; + int i; + + thread = kgdb_usethread; + if (!thread) { + thread = kgdb_info[ks->cpu].task; + local_debuggerinfo = kgdb_info[ks->cpu].debuggerinfo; + } else { + local_debuggerinfo = NULL; + for_each_online_cpu(i) { + /* + * Try to find the task on some other + * or possibly this node if we do not + * find the matching task then we try + * to approximate the results. + */ + if (thread == kgdb_info[i].task) + local_debuggerinfo = kgdb_info[i].debuggerinfo; + } + } + + /* + * All threads that don't have debuggerinfo should be + * in schedule() sleeping, since all other CPUs + * are in kgdb_wait, and thus have debuggerinfo. + */ + if (local_debuggerinfo) { + pt_regs_to_gdb_regs(gdb_regs, local_debuggerinfo); + } else { + /* + * Pull stuff saved during switch_to; nothing + * else is accessible (or even particularly + * relevant). + * + * This should be enough for a stack trace. + */ + sleeping_thread_to_gdb_regs(gdb_regs, thread); + } + kgdb_mem2hex((char *)gdb_regs, remcom_out_buffer, NUMREGBYTES); +} + +/* Handle the 'G' set registers request */ +static void gdb_cmd_setregs(struct kgdb_state *ks) +{ + kgdb_hex2mem(&remcom_in_buffer[1], (char *)gdb_regs, NUMREGBYTES); + + if (kgdb_usethread && kgdb_usethread != current) { + error_packet(remcom_out_buffer, -EINVAL); + } else { + gdb_regs_to_pt_regs(gdb_regs, ks->linux_regs); + strcpy(remcom_out_buffer, "OK"); + } +} + +/* Handle the 'm' memory read bytes */ +static void gdb_cmd_memread(struct kgdb_state *ks) +{ + char *ptr = &remcom_in_buffer[1]; + unsigned long length; + unsigned long addr; + int err; + + if (kgdb_hex2long(&ptr, &addr) > 0 && *ptr++ == ',' && + kgdb_hex2long(&ptr, &length) > 0) { + err = kgdb_mem2hex((char *)addr, remcom_out_buffer, length); + if (err) + error_packet(remcom_out_buffer, err); + } else { + error_packet(remcom_out_buffer, -EINVAL); + } +} + +/* Handle the 'M' memory write bytes */ +static void gdb_cmd_memwrite(struct kgdb_state *ks) +{ + int err = write_mem_msg(0); + + if (err) + error_packet(remcom_out_buffer, err); + else + strcpy(remcom_out_buffer, "OK"); +} + +/* Handle the 'X' memory binary write bytes */ +static void gdb_cmd_binwrite(struct kgdb_state *ks) +{ + int err = write_mem_msg(1); + + if (err) + error_packet(remcom_out_buffer, err); + else + strcpy(remcom_out_buffer, "OK"); +} + +/* Handle the 'D' or 'k', detach or kill packets */ +static void gdb_cmd_detachkill(struct kgdb_state *ks) +{ + int error; + + /* The detach case */ + if (remcom_in_buffer[0] == 'D') { + error = dbg_remove_all_break(); + if (error < 0) { + error_packet(remcom_out_buffer, error); + } else { + strcpy(remcom_out_buffer, "OK"); + kgdb_connected = 0; + } + put_packet(remcom_out_buffer); + } else { + /* + * Assume the kill case, with no exit code checking, + * trying to force detach the debugger: + */ + dbg_remove_all_break(); + kgdb_connected = 0; + } +} + +/* Handle the 'R' reboot packets */ +static int gdb_cmd_reboot(struct kgdb_state *ks) +{ + /* For now, only honor R0 */ + if (strcmp(remcom_in_buffer, "R0") == 0) { + printk(KERN_CRIT "Executing emergency reboot\n"); + strcpy(remcom_out_buffer, "OK"); + put_packet(remcom_out_buffer); + + /* + * Execution should not return from + * machine_emergency_restart() + */ + machine_emergency_restart(); + kgdb_connected = 0; + + return 1; + } + return 0; +} + +/* Handle the 'q' query packets */ +static void gdb_cmd_query(struct kgdb_state *ks) +{ + struct task_struct *g; + struct task_struct *p; + unsigned char thref[8]; + char *ptr; + int i; + int cpu; + int finished = 0; + + switch (remcom_in_buffer[1]) { + case 's': + case 'f': + if (memcmp(remcom_in_buffer + 2, "ThreadInfo", 10)) { + error_packet(remcom_out_buffer, -EINVAL); + break; + } + + i = 0; + remcom_out_buffer[0] = 'm'; + ptr = remcom_out_buffer + 1; + if (remcom_in_buffer[1] == 'f') { + /* Each cpu is a shadow thread */ + for_each_online_cpu(cpu) { + ks->thr_query = 0; + int_to_threadref(thref, -cpu - 2); + pack_threadid(ptr, thref); + ptr += BUF_THREAD_ID_SIZE; + *(ptr++) = ','; + i++; + } + } + + do_each_thread(g, p) { + if (i >= ks->thr_query && !finished) { + int_to_threadref(thref, p->pid); + pack_threadid(ptr, thref); + ptr += BUF_THREAD_ID_SIZE; + *(ptr++) = ','; + ks->thr_query++; + if (ks->thr_query % KGDB_MAX_THREAD_QUERY == 0) + finished = 1; + } + i++; + } while_each_thread(g, p); + + *(--ptr) = '\0'; + break; + + case 'C': + /* Current thread id */ + strcpy(remcom_out_buffer, "QC"); + ks->threadid = shadow_pid(current->pid); + int_to_threadref(thref, ks->threadid); + pack_threadid(remcom_out_buffer + 2, thref); + break; + case 'T': + if (memcmp(remcom_in_buffer + 1, "ThreadExtraInfo,", 16)) { + error_packet(remcom_out_buffer, -EINVAL); + break; + } + ks->threadid = 0; + ptr = remcom_in_buffer + 17; + kgdb_hex2long(&ptr, &ks->threadid); + if (!getthread(ks->linux_regs, ks->threadid)) { + error_packet(remcom_out_buffer, -EINVAL); + break; + } + if ((int)ks->threadid > 0) { + kgdb_mem2hex(getthread(ks->linux_regs, + ks->threadid)->comm, + remcom_out_buffer, 16); + } else { + static char tmpstr[23 + BUF_THREAD_ID_SIZE]; + + sprintf(tmpstr, "shadowCPU%d", + (int)(-ks->threadid - 2)); + kgdb_mem2hex(tmpstr, remcom_out_buffer, strlen(tmpstr)); + } + break; +#ifdef CONFIG_KGDB_KDB + case 'R': + if (strncmp(remcom_in_buffer, "qRcmd,", 6) == 0) { + int len = strlen(remcom_in_buffer + 6); + + if ((len % 2) != 0) { + strcpy(remcom_out_buffer, "E01"); + break; + } + kgdb_hex2mem(remcom_in_buffer + 6, + remcom_out_buffer, len); + len = len / 2; + remcom_out_buffer[len++] = 0; + + kdb_parse(remcom_out_buffer); + strcpy(remcom_out_buffer, "OK"); + } + break; +#endif + } +} + +/* Handle the 'H' task query packets */ +static void gdb_cmd_task(struct kgdb_state *ks) +{ + struct task_struct *thread; + char *ptr; + + switch (remcom_in_buffer[1]) { + case 'g': + ptr = &remcom_in_buffer[2]; + kgdb_hex2long(&ptr, &ks->threadid); + thread = getthread(ks->linux_regs, ks->threadid); + if (!thread && ks->threadid > 0) { + error_packet(remcom_out_buffer, -EINVAL); + break; + } + kgdb_usethread = thread; + ks->kgdb_usethreadid = ks->threadid; + strcpy(remcom_out_buffer, "OK"); + break; + case 'c': + ptr = &remcom_in_buffer[2]; + kgdb_hex2long(&ptr, &ks->threadid); + if (!ks->threadid) { + kgdb_contthread = NULL; + } else { + thread = getthread(ks->linux_regs, ks->threadid); + if (!thread && ks->threadid > 0) { + error_packet(remcom_out_buffer, -EINVAL); + break; + } + kgdb_contthread = thread; + } + strcpy(remcom_out_buffer, "OK"); + break; + } +} + +/* Handle the 'T' thread query packets */ +static void gdb_cmd_thread(struct kgdb_state *ks) +{ + char *ptr = &remcom_in_buffer[1]; + struct task_struct *thread; + + kgdb_hex2long(&ptr, &ks->threadid); + thread = getthread(ks->linux_regs, ks->threadid); + if (thread) + strcpy(remcom_out_buffer, "OK"); + else + error_packet(remcom_out_buffer, -EINVAL); +} + +/* Handle the 'z' or 'Z' breakpoint remove or set packets */ +static void gdb_cmd_break(struct kgdb_state *ks) +{ + /* + * Since GDB-5.3, it's been drafted that '0' is a software + * breakpoint, '1' is a hardware breakpoint, so let's do that. + */ + char *bpt_type = &remcom_in_buffer[1]; + char *ptr = &remcom_in_buffer[2]; + unsigned long addr; + unsigned long length; + int error = 0; + + if (arch_kgdb_ops.set_hw_breakpoint && *bpt_type >= '1') { + /* Unsupported */ + if (*bpt_type > '4') + return; + } else { + if (*bpt_type != '0' && *bpt_type != '1') + /* Unsupported. */ + return; + } + + /* + * Test if this is a hardware breakpoint, and + * if we support it: + */ + if (*bpt_type == '1' && !(arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT)) + /* Unsupported. */ + return; + + if (*(ptr++) != ',') { + error_packet(remcom_out_buffer, -EINVAL); + return; + } + if (!kgdb_hex2long(&ptr, &addr)) { + error_packet(remcom_out_buffer, -EINVAL); + return; + } + if (*(ptr++) != ',' || + !kgdb_hex2long(&ptr, &length)) { + error_packet(remcom_out_buffer, -EINVAL); + return; + } + + if (remcom_in_buffer[0] == 'Z' && *bpt_type == '0') + error = dbg_set_sw_break(addr); + else if (remcom_in_buffer[0] == 'z' && *bpt_type == '0') + error = dbg_remove_sw_break(addr); + else if (remcom_in_buffer[0] == 'Z') + error = arch_kgdb_ops.set_hw_breakpoint(addr, + (int)length, *bpt_type - '0'); + else if (remcom_in_buffer[0] == 'z') + error = arch_kgdb_ops.remove_hw_breakpoint(addr, + (int) length, *bpt_type - '0'); + + if (error == 0) + strcpy(remcom_out_buffer, "OK"); + else + error_packet(remcom_out_buffer, error); +} + +/* Handle the 'C' signal / exception passing packets */ +static int gdb_cmd_exception_pass(struct kgdb_state *ks) +{ + /* C09 == pass exception + * C15 == detach kgdb, pass exception + */ + if (remcom_in_buffer[1] == '0' && remcom_in_buffer[2] == '9') { + + ks->pass_exception = 1; + remcom_in_buffer[0] = 'c'; + + } else if (remcom_in_buffer[1] == '1' && remcom_in_buffer[2] == '5') { + + ks->pass_exception = 1; + remcom_in_buffer[0] = 'D'; + dbg_remove_all_break(); + kgdb_connected = 0; + return 1; + + } else { + gdbstub_msg_write("KGDB only knows signal 9 (pass)" + " and 15 (pass and disconnect)\n" + "Executing a continue without signal passing\n", 0); + remcom_in_buffer[0] = 'c'; + } + + /* Indicate fall through */ + return -1; +} + +/* + * This function performs all gdbserial command procesing + */ +int gdb_serial_stub(struct kgdb_state *ks) +{ + int error = 0; + int tmp; + + /* Clear the out buffer. */ + memset(remcom_out_buffer, 0, sizeof(remcom_out_buffer)); + + if (kgdb_connected) { + unsigned char thref[8]; + char *ptr; + + /* Reply to host that an exception has occurred */ + ptr = remcom_out_buffer; + *ptr++ = 'T'; + ptr = pack_hex_byte(ptr, ks->signo); + ptr += strlen(strcpy(ptr, "thread:")); + int_to_threadref(thref, shadow_pid(current->pid)); + ptr = pack_threadid(ptr, thref); + *ptr++ = ';'; + put_packet(remcom_out_buffer); + } + + kgdb_usethread = kgdb_info[ks->cpu].task; + ks->kgdb_usethreadid = shadow_pid(kgdb_info[ks->cpu].task->pid); + ks->pass_exception = 0; + + while (1) { + error = 0; + + /* Clear the out buffer. */ + memset(remcom_out_buffer, 0, sizeof(remcom_out_buffer)); + + get_packet(remcom_in_buffer); + + switch (remcom_in_buffer[0]) { + case '?': /* gdbserial status */ + gdb_cmd_status(ks); + break; + case 'g': /* return the value of the CPU registers */ + gdb_cmd_getregs(ks); + break; + case 'G': /* set the value of the CPU registers - return OK */ + gdb_cmd_setregs(ks); + break; + case 'm': /* mAA..AA,LLLL Read LLLL bytes at address AA..AA */ + gdb_cmd_memread(ks); + break; + case 'M': /* MAA..AA,LLLL: Write LLLL bytes at address AA..AA */ + gdb_cmd_memwrite(ks); + break; + case 'X': /* XAA..AA,LLLL: Write LLLL bytes at address AA..AA */ + gdb_cmd_binwrite(ks); + break; + /* kill or detach. KGDB should treat this like a + * continue. + */ + case 'D': /* Debugger detach */ + case 'k': /* Debugger detach via kill */ + gdb_cmd_detachkill(ks); + goto default_handle; + case 'R': /* Reboot */ + if (gdb_cmd_reboot(ks)) + goto default_handle; + break; + case 'q': /* query command */ + gdb_cmd_query(ks); + break; + case 'H': /* task related */ + gdb_cmd_task(ks); + break; + case 'T': /* Query thread status */ + gdb_cmd_thread(ks); + break; + case 'z': /* Break point remove */ + case 'Z': /* Break point set */ + gdb_cmd_break(ks); + break; +#ifdef CONFIG_KGDB_KDB + case '3': /* Escape into back into kdb */ + if (remcom_in_buffer[1] == '\0') { + gdb_cmd_detachkill(ks); + return DBG_PASS_EVENT; + } +#endif + case 'C': /* Exception passing */ + tmp = gdb_cmd_exception_pass(ks); + if (tmp > 0) + goto default_handle; + if (tmp == 0) + break; + /* Fall through on tmp < 0 */ + case 'c': /* Continue packet */ + case 's': /* Single step packet */ + if (kgdb_contthread && kgdb_contthread != current) { + /* Can't switch threads in kgdb */ + error_packet(remcom_out_buffer, -EINVAL); + break; + } + dbg_activate_sw_breakpoints(); + /* Fall through to default processing */ + default: +default_handle: + error = kgdb_arch_handle_exception(ks->ex_vector, + ks->signo, + ks->err_code, + remcom_in_buffer, + remcom_out_buffer, + ks->linux_regs); + /* + * Leave cmd processing on error, detach, + * kill, continue, or single step. + */ + if (error >= 0 || remcom_in_buffer[0] == 'D' || + remcom_in_buffer[0] == 'k') { + error = 0; + goto kgdb_exit; + } + + } + + /* reply to the request */ + put_packet(remcom_out_buffer); + } + +kgdb_exit: + if (ks->pass_exception) + error = 1; + return error; +} + +int gdbstub_state(struct kgdb_state *ks, char *cmd) +{ + int error; + + switch (cmd[0]) { + case 'e': + error = kgdb_arch_handle_exception(ks->ex_vector, + ks->signo, + ks->err_code, + remcom_in_buffer, + remcom_out_buffer, + ks->linux_regs); + return error; + case 's': + case 'c': + strcpy(remcom_in_buffer, cmd); + return 0; + case '?': + gdb_cmd_status(ks); + break; + case '\0': + strcpy(remcom_out_buffer, ""); + break; + } + dbg_io_ops->write_char('+'); + put_packet(remcom_out_buffer); + return 0; +} diff --git a/kernel/debug/kdb/.gitignore b/kernel/debug/kdb/.gitignore new file mode 100644 index 00000000000..396d12eda9e --- /dev/null +++ b/kernel/debug/kdb/.gitignore @@ -0,0 +1 @@ +gen-kdb_cmds.c diff --git a/kernel/debug/kdb/Makefile b/kernel/debug/kdb/Makefile new file mode 100644 index 00000000000..d4fc58f4b88 --- /dev/null +++ b/kernel/debug/kdb/Makefile @@ -0,0 +1,25 @@ +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# Copyright (c) 1999-2004 Silicon Graphics, Inc. All Rights Reserved. +# Copyright (c) 2009 Wind River Systems, Inc. All Rights Reserved. +# + +CCVERSION := $(shell $(CC) -v 2>&1 | sed -ne '$$p') +obj-y := kdb_io.o kdb_main.o kdb_support.o kdb_bt.o gen-kdb_cmds.o kdb_bp.o kdb_debugger.o +obj-$(CONFIG_KDB_KEYBOARD) += kdb_keyboard.o + +clean-files := gen-kdb_cmds.c + +quiet_cmd_gen-kdb = GENKDB $@ + cmd_gen-kdb = $(AWK) 'BEGIN {print "\#include <linux/stddef.h>"; print "\#include <linux/init.h>"} \ + /^\#/{next} \ + /^[ \t]*$$/{next} \ + {gsub(/"/, "\\\"", $$0); \ + print "static __initdata char kdb_cmd" cmds++ "[] = \"" $$0 "\\n\";"} \ + END {print "extern char *kdb_cmds[]; char __initdata *kdb_cmds[] = {"; for (i = 0; i < cmds; ++i) {print " kdb_cmd" i ","}; print(" NULL\n};");}' \ + $(filter-out %/Makefile,$^) > $@# + +$(obj)/gen-kdb_cmds.c: $(src)/kdb_cmds $(src)/Makefile + $(call cmd,gen-kdb) diff --git a/kernel/debug/kdb/kdb_bp.c b/kernel/debug/kdb/kdb_bp.c new file mode 100644 index 00000000000..75bd9b3ebbb --- /dev/null +++ b/kernel/debug/kdb/kdb_bp.c @@ -0,0 +1,564 @@ +/* + * Kernel Debugger Architecture Independent Breakpoint Handler + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 1999-2004 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (c) 2009 Wind River Systems, Inc. All Rights Reserved. + */ + +#include <linux/string.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/kdb.h> +#include <linux/kgdb.h> +#include <linux/smp.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include "kdb_private.h" + +/* + * Table of kdb_breakpoints + */ +kdb_bp_t kdb_breakpoints[KDB_MAXBPT]; + +static void kdb_setsinglestep(struct pt_regs *regs) +{ + KDB_STATE_SET(DOING_SS); +} + +static char *kdb_rwtypes[] = { + "Instruction(i)", + "Instruction(Register)", + "Data Write", + "I/O", + "Data Access" +}; + +static char *kdb_bptype(kdb_bp_t *bp) +{ + if (bp->bp_type < 0 || bp->bp_type > 4) + return ""; + + return kdb_rwtypes[bp->bp_type]; +} + +static int kdb_parsebp(int argc, const char **argv, int *nextargp, kdb_bp_t *bp) +{ + int nextarg = *nextargp; + int diag; + + bp->bph_length = 1; + if ((argc + 1) != nextarg) { + if (strnicmp(argv[nextarg], "datar", sizeof("datar")) == 0) + bp->bp_type = BP_ACCESS_WATCHPOINT; + else if (strnicmp(argv[nextarg], "dataw", sizeof("dataw")) == 0) + bp->bp_type = BP_WRITE_WATCHPOINT; + else if (strnicmp(argv[nextarg], "inst", sizeof("inst")) == 0) + bp->bp_type = BP_HARDWARE_BREAKPOINT; + else + return KDB_ARGCOUNT; + + bp->bph_length = 1; + + nextarg++; + + if ((argc + 1) != nextarg) { + unsigned long len; + + diag = kdbgetularg((char *)argv[nextarg], + &len); + if (diag) + return diag; + + + if (len > 8) + return KDB_BADLENGTH; + + bp->bph_length = len; + nextarg++; + } + + if ((argc + 1) != nextarg) + return KDB_ARGCOUNT; + } + + *nextargp = nextarg; + return 0; +} + +static int _kdb_bp_remove(kdb_bp_t *bp) +{ + int ret = 1; + if (!bp->bp_installed) + return ret; + if (!bp->bp_type) + ret = dbg_remove_sw_break(bp->bp_addr); + else + ret = arch_kgdb_ops.remove_hw_breakpoint(bp->bp_addr, + bp->bph_length, + bp->bp_type); + if (ret == 0) + bp->bp_installed = 0; + return ret; +} + +static void kdb_handle_bp(struct pt_regs *regs, kdb_bp_t *bp) +{ + if (KDB_DEBUG(BP)) + kdb_printf("regs->ip = 0x%lx\n", instruction_pointer(regs)); + + /* + * Setup single step + */ + kdb_setsinglestep(regs); + + /* + * Reset delay attribute + */ + bp->bp_delay = 0; + bp->bp_delayed = 1; +} + +static int _kdb_bp_install(struct pt_regs *regs, kdb_bp_t *bp) +{ + int ret; + /* + * Install the breakpoint, if it is not already installed. + */ + + if (KDB_DEBUG(BP)) + kdb_printf("%s: bp_installed %d\n", + __func__, bp->bp_installed); + if (!KDB_STATE(SSBPT)) + bp->bp_delay = 0; + if (bp->bp_installed) + return 1; + if (bp->bp_delay || (bp->bp_delayed && KDB_STATE(DOING_SS))) { + if (KDB_DEBUG(BP)) + kdb_printf("%s: delayed bp\n", __func__); + kdb_handle_bp(regs, bp); + return 0; + } + if (!bp->bp_type) + ret = dbg_set_sw_break(bp->bp_addr); + else + ret = arch_kgdb_ops.set_hw_breakpoint(bp->bp_addr, + bp->bph_length, + bp->bp_type); + if (ret == 0) { + bp->bp_installed = 1; + } else { + kdb_printf("%s: failed to set breakpoint at 0x%lx\n", + __func__, bp->bp_addr); + return 1; + } + return 0; +} + +/* + * kdb_bp_install + * + * Install kdb_breakpoints prior to returning from the + * kernel debugger. This allows the kdb_breakpoints to be set + * upon functions that are used internally by kdb, such as + * printk(). This function is only called once per kdb session. + */ +void kdb_bp_install(struct pt_regs *regs) +{ + int i; + + for (i = 0; i < KDB_MAXBPT; i++) { + kdb_bp_t *bp = &kdb_breakpoints[i]; + + if (KDB_DEBUG(BP)) { + kdb_printf("%s: bp %d bp_enabled %d\n", + __func__, i, bp->bp_enabled); + } + if (bp->bp_enabled) + _kdb_bp_install(regs, bp); + } +} + +/* + * kdb_bp_remove + * + * Remove kdb_breakpoints upon entry to the kernel debugger. + * + * Parameters: + * None. + * Outputs: + * None. + * Returns: + * None. + * Locking: + * None. + * Remarks: + */ +void kdb_bp_remove(void) +{ + int i; + + for (i = KDB_MAXBPT - 1; i >= 0; i--) { + kdb_bp_t *bp = &kdb_breakpoints[i]; + + if (KDB_DEBUG(BP)) { + kdb_printf("%s: bp %d bp_enabled %d\n", + __func__, i, bp->bp_enabled); + } + if (bp->bp_enabled) + _kdb_bp_remove(bp); + } +} + + +/* + * kdb_printbp + * + * Internal function to format and print a breakpoint entry. + * + * Parameters: + * None. + * Outputs: + * None. + * Returns: + * None. + * Locking: + * None. + * Remarks: + */ + +static void kdb_printbp(kdb_bp_t *bp, int i) +{ + kdb_printf("%s ", kdb_bptype(bp)); + kdb_printf("BP #%d at ", i); + kdb_symbol_print(bp->bp_addr, NULL, KDB_SP_DEFAULT); + + if (bp->bp_enabled) + kdb_printf("\n is enabled"); + else + kdb_printf("\n is disabled"); + + kdb_printf("\taddr at %016lx, hardtype=%d installed=%d\n", + bp->bp_addr, bp->bp_type, bp->bp_installed); + + kdb_printf("\n"); +} + +/* + * kdb_bp + * + * Handle the bp commands. + * + * [bp|bph] <addr-expression> [DATAR|DATAW] + * + * Parameters: + * argc Count of arguments in argv + * argv Space delimited command line arguments + * Outputs: + * None. + * Returns: + * Zero for success, a kdb diagnostic if failure. + * Locking: + * None. + * Remarks: + * + * bp Set breakpoint on all cpus. Only use hardware assist if need. + * bph Set breakpoint on all cpus. Force hardware register + */ + +static int kdb_bp(int argc, const char **argv) +{ + int i, bpno; + kdb_bp_t *bp, *bp_check; + int diag; + int free; + char *symname = NULL; + long offset = 0ul; + int nextarg; + kdb_bp_t template = {0}; + + if (argc == 0) { + /* + * Display breakpoint table + */ + for (bpno = 0, bp = kdb_breakpoints; bpno < KDB_MAXBPT; + bpno++, bp++) { + if (bp->bp_free) + continue; + kdb_printbp(bp, bpno); + } + + return 0; + } + + nextarg = 1; + diag = kdbgetaddrarg(argc, argv, &nextarg, &template.bp_addr, + &offset, &symname); + if (diag) + return diag; + if (!template.bp_addr) + return KDB_BADINT; + + /* + * Find an empty bp structure to allocate + */ + free = KDB_MAXBPT; + for (bpno = 0, bp = kdb_breakpoints; bpno < KDB_MAXBPT; bpno++, bp++) { + if (bp->bp_free) + break; + } + + if (bpno == KDB_MAXBPT) + return KDB_TOOMANYBPT; + + if (strcmp(argv[0], "bph") == 0) { + template.bp_type = BP_HARDWARE_BREAKPOINT; + diag = kdb_parsebp(argc, argv, &nextarg, &template); + if (diag) + return diag; + } else { + template.bp_type = BP_BREAKPOINT; + } + + /* + * Check for clashing breakpoints. + * + * Note, in this design we can't have hardware breakpoints + * enabled for both read and write on the same address. + */ + for (i = 0, bp_check = kdb_breakpoints; i < KDB_MAXBPT; + i++, bp_check++) { + if (!bp_check->bp_free && + bp_check->bp_addr == template.bp_addr) { + kdb_printf("You already have a breakpoint at " + kdb_bfd_vma_fmt0 "\n", template.bp_addr); + return KDB_DUPBPT; + } + } + + template.bp_enabled = 1; + + /* + * Actually allocate the breakpoint found earlier + */ + *bp = template; + bp->bp_free = 0; + + kdb_printbp(bp, bpno); + + return 0; +} + +/* + * kdb_bc + * + * Handles the 'bc', 'be', and 'bd' commands + * + * [bd|bc|be] <breakpoint-number> + * [bd|bc|be] * + * + * Parameters: + * argc Count of arguments in argv + * argv Space delimited command line arguments + * Outputs: + * None. + * Returns: + * Zero for success, a kdb diagnostic for failure + * Locking: + * None. + * Remarks: + */ +static int kdb_bc(int argc, const char **argv) +{ + unsigned long addr; + kdb_bp_t *bp = NULL; + int lowbp = KDB_MAXBPT; + int highbp = 0; + int done = 0; + int i; + int diag = 0; + + int cmd; /* KDBCMD_B? */ +#define KDBCMD_BC 0 +#define KDBCMD_BE 1 +#define KDBCMD_BD 2 + + if (strcmp(argv[0], "be") == 0) + cmd = KDBCMD_BE; + else if (strcmp(argv[0], "bd") == 0) + cmd = KDBCMD_BD; + else + cmd = KDBCMD_BC; + + if (argc != 1) + return KDB_ARGCOUNT; + + if (strcmp(argv[1], "*") == 0) { + lowbp = 0; + highbp = KDB_MAXBPT; + } else { + diag = kdbgetularg(argv[1], &addr); + if (diag) + return diag; + + /* + * For addresses less than the maximum breakpoint number, + * assume that the breakpoint number is desired. + */ + if (addr < KDB_MAXBPT) { + bp = &kdb_breakpoints[addr]; + lowbp = highbp = addr; + highbp++; + } else { + for (i = 0, bp = kdb_breakpoints; i < KDB_MAXBPT; + i++, bp++) { + if (bp->bp_addr == addr) { + lowbp = highbp = i; + highbp++; + break; + } + } + } + } + + /* + * Now operate on the set of breakpoints matching the input + * criteria (either '*' for all, or an individual breakpoint). + */ + for (bp = &kdb_breakpoints[lowbp], i = lowbp; + i < highbp; + i++, bp++) { + if (bp->bp_free) + continue; + + done++; + + switch (cmd) { + case KDBCMD_BC: + bp->bp_enabled = 0; + + kdb_printf("Breakpoint %d at " + kdb_bfd_vma_fmt " cleared\n", + i, bp->bp_addr); + + bp->bp_addr = 0; + bp->bp_free = 1; + + break; + case KDBCMD_BE: + bp->bp_enabled = 1; + + kdb_printf("Breakpoint %d at " + kdb_bfd_vma_fmt " enabled", + i, bp->bp_addr); + + kdb_printf("\n"); + break; + case KDBCMD_BD: + if (!bp->bp_enabled) + break; + + bp->bp_enabled = 0; + + kdb_printf("Breakpoint %d at " + kdb_bfd_vma_fmt " disabled\n", + i, bp->bp_addr); + + break; + } + if (bp->bp_delay && (cmd == KDBCMD_BC || cmd == KDBCMD_BD)) { + bp->bp_delay = 0; + KDB_STATE_CLEAR(SSBPT); + } + } + + return (!done) ? KDB_BPTNOTFOUND : 0; +} + +/* + * kdb_ss + * + * Process the 'ss' (Single Step) and 'ssb' (Single Step to Branch) + * commands. + * + * ss + * ssb + * + * Parameters: + * argc Argument count + * argv Argument vector + * Outputs: + * None. + * Returns: + * KDB_CMD_SS[B] for success, a kdb error if failure. + * Locking: + * None. + * Remarks: + * + * Set the arch specific option to trigger a debug trap after the next + * instruction. + * + * For 'ssb', set the trace flag in the debug trap handler + * after printing the current insn and return directly without + * invoking the kdb command processor, until a branch instruction + * is encountered. + */ + +static int kdb_ss(int argc, const char **argv) +{ + int ssb = 0; + + ssb = (strcmp(argv[0], "ssb") == 0); + if (argc != 0) + return KDB_ARGCOUNT; + /* + * Set trace flag and go. + */ + KDB_STATE_SET(DOING_SS); + if (ssb) { + KDB_STATE_SET(DOING_SSB); + return KDB_CMD_SSB; + } + return KDB_CMD_SS; +} + +/* Initialize the breakpoint table and register breakpoint commands. */ + +void __init kdb_initbptab(void) +{ + int i; + kdb_bp_t *bp; + + /* + * First time initialization. + */ + memset(&kdb_breakpoints, '\0', sizeof(kdb_breakpoints)); + + for (i = 0, bp = kdb_breakpoints; i < KDB_MAXBPT; i++, bp++) + bp->bp_free = 1; + + kdb_register_repeat("bp", kdb_bp, "[<vaddr>]", + "Set/Display breakpoints", 0, KDB_REPEAT_NO_ARGS); + kdb_register_repeat("bl", kdb_bp, "[<vaddr>]", + "Display breakpoints", 0, KDB_REPEAT_NO_ARGS); + if (arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT) + kdb_register_repeat("bph", kdb_bp, "[<vaddr>]", + "[datar [length]|dataw [length]] Set hw brk", 0, KDB_REPEAT_NO_ARGS); + kdb_register_repeat("bc", kdb_bc, "<bpnum>", + "Clear Breakpoint", 0, KDB_REPEAT_NONE); + kdb_register_repeat("be", kdb_bc, "<bpnum>", + "Enable Breakpoint", 0, KDB_REPEAT_NONE); + kdb_register_repeat("bd", kdb_bc, "<bpnum>", + "Disable Breakpoint", 0, KDB_REPEAT_NONE); + + kdb_register_repeat("ss", kdb_ss, "", + "Single Step", 1, KDB_REPEAT_NO_ARGS); + kdb_register_repeat("ssb", kdb_ss, "", + "Single step to branch/call", 0, KDB_REPEAT_NO_ARGS); + /* + * Architecture dependent initialization. + */ +} diff --git a/kernel/debug/kdb/kdb_bt.c b/kernel/debug/kdb/kdb_bt.c new file mode 100644 index 00000000000..2f62fe85f16 --- /dev/null +++ b/kernel/debug/kdb/kdb_bt.c @@ -0,0 +1,210 @@ +/* + * Kernel Debugger Architecture Independent Stack Traceback + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 1999-2004 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (c) 2009 Wind River Systems, Inc. All Rights Reserved. + */ + +#include <linux/ctype.h> +#include <linux/string.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/kdb.h> +#include <linux/nmi.h> +#include <asm/system.h> +#include "kdb_private.h" + + +static void kdb_show_stack(struct task_struct *p, void *addr) +{ + int old_lvl = console_loglevel; + console_loglevel = 15; + kdb_trap_printk++; + kdb_set_current_task(p); + if (addr) { + show_stack((struct task_struct *)p, addr); + } else if (kdb_current_regs) { +#ifdef CONFIG_X86 + show_stack(p, &kdb_current_regs->sp); +#else + show_stack(p, NULL); +#endif + } else { + show_stack(p, NULL); + } + console_loglevel = old_lvl; + kdb_trap_printk--; +} + +/* + * kdb_bt + * + * This function implements the 'bt' command. Print a stack + * traceback. + * + * bt [<address-expression>] (addr-exp is for alternate stacks) + * btp <pid> Kernel stack for <pid> + * btt <address-expression> Kernel stack for task structure at + * <address-expression> + * bta [DRSTCZEUIMA] All useful processes, optionally + * filtered by state + * btc [<cpu>] The current process on one cpu, + * default is all cpus + * + * bt <address-expression> refers to a address on the stack, that location + * is assumed to contain a return address. + * + * btt <address-expression> refers to the address of a struct task. + * + * Inputs: + * argc argument count + * argv argument vector + * Outputs: + * None. + * Returns: + * zero for success, a kdb diagnostic if error + * Locking: + * none. + * Remarks: + * Backtrack works best when the code uses frame pointers. But even + * without frame pointers we should get a reasonable trace. + * + * mds comes in handy when examining the stack to do a manual traceback or + * to get a starting point for bt <address-expression>. + */ + +static int +kdb_bt1(struct task_struct *p, unsigned long mask, + int argcount, int btaprompt) +{ + char buffer[2]; + if (kdb_getarea(buffer[0], (unsigned long)p) || + kdb_getarea(buffer[0], (unsigned long)(p+1)-1)) + return KDB_BADADDR; + if (!kdb_task_state(p, mask)) + return 0; + kdb_printf("Stack traceback for pid %d\n", p->pid); + kdb_ps1(p); + kdb_show_stack(p, NULL); + if (btaprompt) { + kdb_getstr(buffer, sizeof(buffer), + "Enter <q> to end, <cr> to continue:"); + if (buffer[0] == 'q') { + kdb_printf("\n"); + return 1; + } + } + touch_nmi_watchdog(); + return 0; +} + +int +kdb_bt(int argc, const char **argv) +{ + int diag; + int argcount = 5; + int btaprompt = 1; + int nextarg; + unsigned long addr; + long offset; + + kdbgetintenv("BTARGS", &argcount); /* Arguments to print */ + kdbgetintenv("BTAPROMPT", &btaprompt); /* Prompt after each + * proc in bta */ + + if (strcmp(argv[0], "bta") == 0) { + struct task_struct *g, *p; + unsigned long cpu; + unsigned long mask = kdb_task_state_string(argc ? argv[1] : + NULL); + if (argc == 0) + kdb_ps_suppressed(); + /* Run the active tasks first */ + for_each_online_cpu(cpu) { + p = kdb_curr_task(cpu); + if (kdb_bt1(p, mask, argcount, btaprompt)) + return 0; + } + /* Now the inactive tasks */ + kdb_do_each_thread(g, p) { + if (task_curr(p)) + continue; + if (kdb_bt1(p, mask, argcount, btaprompt)) + return 0; + } kdb_while_each_thread(g, p); + } else if (strcmp(argv[0], "btp") == 0) { + struct task_struct *p; + unsigned long pid; + if (argc != 1) + return KDB_ARGCOUNT; + diag = kdbgetularg((char *)argv[1], &pid); + if (diag) + return diag; + p = find_task_by_pid_ns(pid, &init_pid_ns); + if (p) { + kdb_set_current_task(p); + return kdb_bt1(p, ~0UL, argcount, 0); + } + kdb_printf("No process with pid == %ld found\n", pid); + return 0; + } else if (strcmp(argv[0], "btt") == 0) { + if (argc != 1) + return KDB_ARGCOUNT; + diag = kdbgetularg((char *)argv[1], &addr); + if (diag) + return diag; + kdb_set_current_task((struct task_struct *)addr); + return kdb_bt1((struct task_struct *)addr, ~0UL, argcount, 0); + } else if (strcmp(argv[0], "btc") == 0) { + unsigned long cpu = ~0; + struct task_struct *save_current_task = kdb_current_task; + char buf[80]; + if (argc > 1) + return KDB_ARGCOUNT; + if (argc == 1) { + diag = kdbgetularg((char *)argv[1], &cpu); + if (diag) + return diag; + } + /* Recursive use of kdb_parse, do not use argv after + * this point */ + argv = NULL; + if (cpu != ~0) { + if (cpu >= num_possible_cpus() || !cpu_online(cpu)) { + kdb_printf("no process for cpu %ld\n", cpu); + return 0; + } + sprintf(buf, "btt 0x%p\n", KDB_TSK(cpu)); + kdb_parse(buf); + return 0; + } + kdb_printf("btc: cpu status: "); + kdb_parse("cpu\n"); + for_each_online_cpu(cpu) { + sprintf(buf, "btt 0x%p\n", KDB_TSK(cpu)); + kdb_parse(buf); + touch_nmi_watchdog(); + } + kdb_set_current_task(save_current_task); + return 0; + } else { + if (argc) { + nextarg = 1; + diag = kdbgetaddrarg(argc, argv, &nextarg, &addr, + &offset, NULL); + if (diag) + return diag; + kdb_show_stack(kdb_current_task, (void *)addr); + return 0; + } else { + return kdb_bt1(kdb_current_task, ~0UL, argcount, 0); + } + } + + /* NOTREACHED */ + return 0; +} diff --git a/kernel/debug/kdb/kdb_cmds b/kernel/debug/kdb/kdb_cmds new file mode 100644 index 00000000000..56c88e4db30 --- /dev/null +++ b/kernel/debug/kdb/kdb_cmds @@ -0,0 +1,35 @@ +# Initial commands for kdb, alter to suit your needs. +# These commands are executed in kdb_init() context, no SMP, no +# processes. Commands that require process data (including stack or +# registers) are not reliable this early. set and bp commands should +# be safe. Global breakpoint commands affect each cpu as it is booted. + +# Standard debugging information for first level support, just type archkdb +# or archkdbcpu or archkdbshort at the kdb prompt. + +defcmd dumpcommon "" "Common kdb debugging" + set BTAPROMPT 0 + set LINES 10000 + -summary + -cpu + -ps + -dmesg 600 + -bt +endefcmd + +defcmd dumpall "" "First line debugging" + set BTSYMARG 1 + set BTARGS 9 + pid R + -dumpcommon + -bta +endefcmd + +defcmd dumpcpu "" "Same as dumpall but only tasks on cpus" + set BTSYMARG 1 + set BTARGS 9 + pid R + -dumpcommon + -btc +endefcmd + diff --git a/kernel/debug/kdb/kdb_debugger.c b/kernel/debug/kdb/kdb_debugger.c new file mode 100644 index 00000000000..bf6e8270e95 --- /dev/null +++ b/kernel/debug/kdb/kdb_debugger.c @@ -0,0 +1,169 @@ +/* + * Created by: Jason Wessel <jason.wessel@windriver.com> + * + * Copyright (c) 2009 Wind River Systems, Inc. All Rights Reserved. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kgdb.h> +#include <linux/kdb.h> +#include <linux/kdebug.h> +#include "kdb_private.h" +#include "../debug_core.h" + +/* + * KDB interface to KGDB internals + */ +get_char_func kdb_poll_funcs[] = { + dbg_io_get_char, + NULL, + NULL, + NULL, + NULL, + NULL, +}; +EXPORT_SYMBOL_GPL(kdb_poll_funcs); + +int kdb_poll_idx = 1; +EXPORT_SYMBOL_GPL(kdb_poll_idx); + +int kdb_stub(struct kgdb_state *ks) +{ + int error = 0; + kdb_bp_t *bp; + unsigned long addr = kgdb_arch_pc(ks->ex_vector, ks->linux_regs); + kdb_reason_t reason = KDB_REASON_OOPS; + kdb_dbtrap_t db_result = KDB_DB_NOBPT; + int i; + + if (KDB_STATE(REENTRY)) { + reason = KDB_REASON_SWITCH; + KDB_STATE_CLEAR(REENTRY); + addr = instruction_pointer(ks->linux_regs); + } + ks->pass_exception = 0; + if (atomic_read(&kgdb_setting_breakpoint)) + reason = KDB_REASON_KEYBOARD; + + for (i = 0, bp = kdb_breakpoints; i < KDB_MAXBPT; i++, bp++) { + if ((bp->bp_enabled) && (bp->bp_addr == addr)) { + reason = KDB_REASON_BREAK; + db_result = KDB_DB_BPT; + if (addr != instruction_pointer(ks->linux_regs)) + kgdb_arch_set_pc(ks->linux_regs, addr); + break; + } + } + if (reason == KDB_REASON_BREAK || reason == KDB_REASON_SWITCH) { + for (i = 0, bp = kdb_breakpoints; i < KDB_MAXBPT; i++, bp++) { + if (bp->bp_free) + continue; + if (bp->bp_addr == addr) { + bp->bp_delay = 1; + bp->bp_delayed = 1; + /* + * SSBPT is set when the kernel debugger must single step a + * task in order to re-establish an instruction breakpoint + * which uses the instruction replacement mechanism. It is + * cleared by any action that removes the need to single-step + * the breakpoint. + */ + reason = KDB_REASON_BREAK; + db_result = KDB_DB_BPT; + KDB_STATE_SET(SSBPT); + break; + } + } + } + + if (reason != KDB_REASON_BREAK && ks->ex_vector == 0 && + ks->signo == SIGTRAP) { + reason = KDB_REASON_SSTEP; + db_result = KDB_DB_BPT; + } + /* Set initial kdb state variables */ + KDB_STATE_CLEAR(KGDB_TRANS); + kdb_initial_cpu = ks->cpu; + kdb_current_task = kgdb_info[ks->cpu].task; + kdb_current_regs = kgdb_info[ks->cpu].debuggerinfo; + /* Remove any breakpoints as needed by kdb and clear single step */ + kdb_bp_remove(); + KDB_STATE_CLEAR(DOING_SS); + KDB_STATE_CLEAR(DOING_SSB); + KDB_STATE_SET(PAGER); + /* zero out any offline cpu data */ + for_each_present_cpu(i) { + if (!cpu_online(i)) { + kgdb_info[i].debuggerinfo = NULL; + kgdb_info[i].task = NULL; + } + } + if (ks->err_code == DIE_OOPS || reason == KDB_REASON_OOPS) { + ks->pass_exception = 1; + KDB_FLAG_SET(CATASTROPHIC); + } + kdb_initial_cpu = ks->cpu; + if (KDB_STATE(SSBPT) && reason == KDB_REASON_SSTEP) { + KDB_STATE_CLEAR(SSBPT); + KDB_STATE_CLEAR(DOING_SS); + } else { + /* Start kdb main loop */ + error = kdb_main_loop(KDB_REASON_ENTER, reason, + ks->err_code, db_result, ks->linux_regs); + } + /* + * Upon exit from the kdb main loop setup break points and restart + * the system based on the requested continue state + */ + kdb_initial_cpu = -1; + kdb_current_task = NULL; + kdb_current_regs = NULL; + KDB_STATE_CLEAR(PAGER); + kdbnearsym_cleanup(); + if (error == KDB_CMD_KGDB) { + if (KDB_STATE(DOING_KGDB) || KDB_STATE(DOING_KGDB2)) { + /* + * This inteface glue which allows kdb to transition in into + * the gdb stub. In order to do this the '?' or '' gdb serial + * packet response is processed here. And then control is + * passed to the gdbstub. + */ + if (KDB_STATE(DOING_KGDB)) + gdbstub_state(ks, "?"); + else + gdbstub_state(ks, ""); + KDB_STATE_CLEAR(DOING_KGDB); + KDB_STATE_CLEAR(DOING_KGDB2); + } + return DBG_PASS_EVENT; + } + kdb_bp_install(ks->linux_regs); + dbg_activate_sw_breakpoints(); + /* Set the exit state to a single step or a continue */ + if (KDB_STATE(DOING_SS)) + gdbstub_state(ks, "s"); + else + gdbstub_state(ks, "c"); + + KDB_FLAG_CLEAR(CATASTROPHIC); + + /* Invoke arch specific exception handling prior to system resume */ + kgdb_info[ks->cpu].ret_state = gdbstub_state(ks, "e"); + if (ks->pass_exception) + kgdb_info[ks->cpu].ret_state = 1; + if (error == KDB_CMD_CPU) { + KDB_STATE_SET(REENTRY); + /* + * Force clear the single step bit because kdb emulates this + * differently vs the gdbstub + */ + kgdb_single_step = 0; + dbg_deactivate_sw_breakpoints(); + return DBG_SWITCH_CPU_EVENT; + } + return kgdb_info[ks->cpu].ret_state; +} + diff --git a/kernel/debug/kdb/kdb_io.c b/kernel/debug/kdb/kdb_io.c new file mode 100644 index 00000000000..c9b7f4f90bb --- /dev/null +++ b/kernel/debug/kdb/kdb_io.c @@ -0,0 +1,826 @@ +/* + * Kernel Debugger Architecture Independent Console I/O handler + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 1999-2006 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (c) 2009 Wind River Systems, Inc. All Rights Reserved. + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/ctype.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/kdev_t.h> +#include <linux/console.h> +#include <linux/string.h> +#include <linux/sched.h> +#include <linux/smp.h> +#include <linux/nmi.h> +#include <linux/delay.h> +#include <linux/kgdb.h> +#include <linux/kdb.h> +#include <linux/kallsyms.h> +#include "kdb_private.h" + +#define CMD_BUFLEN 256 +char kdb_prompt_str[CMD_BUFLEN]; + +int kdb_trap_printk; + +static void kgdb_transition_check(char *buffer) +{ + int slen = strlen(buffer); + if (strncmp(buffer, "$?#3f", slen) != 0 && + strncmp(buffer, "$qSupported#37", slen) != 0 && + strncmp(buffer, "+$qSupported#37", slen) != 0) { + KDB_STATE_SET(KGDB_TRANS); + kdb_printf("%s", buffer); + } +} + +static int kdb_read_get_key(char *buffer, size_t bufsize) +{ +#define ESCAPE_UDELAY 1000 +#define ESCAPE_DELAY (2*1000000/ESCAPE_UDELAY) /* 2 seconds worth of udelays */ + char escape_data[5]; /* longest vt100 escape sequence is 4 bytes */ + char *ped = escape_data; + int escape_delay = 0; + get_char_func *f, *f_escape = NULL; + int key; + + for (f = &kdb_poll_funcs[0]; ; ++f) { + if (*f == NULL) { + /* Reset NMI watchdog once per poll loop */ + touch_nmi_watchdog(); + f = &kdb_poll_funcs[0]; + } + if (escape_delay == 2) { + *ped = '\0'; + ped = escape_data; + --escape_delay; + } + if (escape_delay == 1) { + key = *ped++; + if (!*ped) + --escape_delay; + break; + } + key = (*f)(); + if (key == -1) { + if (escape_delay) { + udelay(ESCAPE_UDELAY); + --escape_delay; + } + continue; + } + if (bufsize <= 2) { + if (key == '\r') + key = '\n'; + *buffer++ = key; + *buffer = '\0'; + return -1; + } + if (escape_delay == 0 && key == '\e') { + escape_delay = ESCAPE_DELAY; + ped = escape_data; + f_escape = f; + } + if (escape_delay) { + *ped++ = key; + if (f_escape != f) { + escape_delay = 2; + continue; + } + if (ped - escape_data == 1) { + /* \e */ + continue; + } else if (ped - escape_data == 2) { + /* \e<something> */ + if (key != '[') + escape_delay = 2; + continue; + } else if (ped - escape_data == 3) { + /* \e[<something> */ + int mapkey = 0; + switch (key) { + case 'A': /* \e[A, up arrow */ + mapkey = 16; + break; + case 'B': /* \e[B, down arrow */ + mapkey = 14; + break; + case 'C': /* \e[C, right arrow */ + mapkey = 6; + break; + case 'D': /* \e[D, left arrow */ + mapkey = 2; + break; + case '1': /* dropthrough */ + case '3': /* dropthrough */ + /* \e[<1,3,4>], may be home, del, end */ + case '4': + mapkey = -1; + break; + } + if (mapkey != -1) { + if (mapkey > 0) { + escape_data[0] = mapkey; + escape_data[1] = '\0'; + } + escape_delay = 2; + } + continue; + } else if (ped - escape_data == 4) { + /* \e[<1,3,4><something> */ + int mapkey = 0; + if (key == '~') { + switch (escape_data[2]) { + case '1': /* \e[1~, home */ + mapkey = 1; + break; + case '3': /* \e[3~, del */ + mapkey = 4; + break; + case '4': /* \e[4~, end */ + mapkey = 5; + break; + } + } + if (mapkey > 0) { + escape_data[0] = mapkey; + escape_data[1] = '\0'; + } + escape_delay = 2; + continue; + } + } + break; /* A key to process */ + } + return key; +} + +/* + * kdb_read + * + * This function reads a string of characters, terminated by + * a newline, or by reaching the end of the supplied buffer, + * from the current kernel debugger console device. + * Parameters: + * buffer - Address of character buffer to receive input characters. + * bufsize - size, in bytes, of the character buffer + * Returns: + * Returns a pointer to the buffer containing the received + * character string. This string will be terminated by a + * newline character. + * Locking: + * No locks are required to be held upon entry to this + * function. It is not reentrant - it relies on the fact + * that while kdb is running on only one "master debug" cpu. + * Remarks: + * + * The buffer size must be >= 2. A buffer size of 2 means that the caller only + * wants a single key. + * + * An escape key could be the start of a vt100 control sequence such as \e[D + * (left arrow) or it could be a character in its own right. The standard + * method for detecting the difference is to wait for 2 seconds to see if there + * are any other characters. kdb is complicated by the lack of a timer service + * (interrupts are off), by multiple input sources and by the need to sometimes + * return after just one key. Escape sequence processing has to be done as + * states in the polling loop. + */ + +static char *kdb_read(char *buffer, size_t bufsize) +{ + char *cp = buffer; + char *bufend = buffer+bufsize-2; /* Reserve space for newline + * and null byte */ + char *lastchar; + char *p_tmp; + char tmp; + static char tmpbuffer[CMD_BUFLEN]; + int len = strlen(buffer); + int len_tmp; + int tab = 0; + int count; + int i; + int diag, dtab_count; + int key; + + + diag = kdbgetintenv("DTABCOUNT", &dtab_count); + if (diag) + dtab_count = 30; + + if (len > 0) { + cp += len; + if (*(buffer+len-1) == '\n') + cp--; + } + + lastchar = cp; + *cp = '\0'; + kdb_printf("%s", buffer); +poll_again: + key = kdb_read_get_key(buffer, bufsize); + if (key == -1) + return buffer; + if (key != 9) + tab = 0; + switch (key) { + case 8: /* backspace */ + if (cp > buffer) { + if (cp < lastchar) { + memcpy(tmpbuffer, cp, lastchar - cp); + memcpy(cp-1, tmpbuffer, lastchar - cp); + } + *(--lastchar) = '\0'; + --cp; + kdb_printf("\b%s \r", cp); + tmp = *cp; + *cp = '\0'; + kdb_printf(kdb_prompt_str); + kdb_printf("%s", buffer); + *cp = tmp; + } + break; + case 13: /* enter */ + *lastchar++ = '\n'; + *lastchar++ = '\0'; + kdb_printf("\n"); + return buffer; + case 4: /* Del */ + if (cp < lastchar) { + memcpy(tmpbuffer, cp+1, lastchar - cp - 1); + memcpy(cp, tmpbuffer, lastchar - cp - 1); + *(--lastchar) = '\0'; + kdb_printf("%s \r", cp); + tmp = *cp; + *cp = '\0'; + kdb_printf(kdb_prompt_str); + kdb_printf("%s", buffer); + *cp = tmp; + } + break; + case 1: /* Home */ + if (cp > buffer) { + kdb_printf("\r"); + kdb_printf(kdb_prompt_str); + cp = buffer; + } + break; + case 5: /* End */ + if (cp < lastchar) { + kdb_printf("%s", cp); + cp = lastchar; + } + break; + case 2: /* Left */ + if (cp > buffer) { + kdb_printf("\b"); + --cp; + } + break; + case 14: /* Down */ + memset(tmpbuffer, ' ', + strlen(kdb_prompt_str) + (lastchar-buffer)); + *(tmpbuffer+strlen(kdb_prompt_str) + + (lastchar-buffer)) = '\0'; + kdb_printf("\r%s\r", tmpbuffer); + *lastchar = (char)key; + *(lastchar+1) = '\0'; + return lastchar; + case 6: /* Right */ + if (cp < lastchar) { + kdb_printf("%c", *cp); + ++cp; + } + break; + case 16: /* Up */ + memset(tmpbuffer, ' ', + strlen(kdb_prompt_str) + (lastchar-buffer)); + *(tmpbuffer+strlen(kdb_prompt_str) + + (lastchar-buffer)) = '\0'; + kdb_printf("\r%s\r", tmpbuffer); + *lastchar = (char)key; + *(lastchar+1) = '\0'; + return lastchar; + case 9: /* Tab */ + if (tab < 2) + ++tab; + p_tmp = buffer; + while (*p_tmp == ' ') + p_tmp++; + if (p_tmp > cp) + break; + memcpy(tmpbuffer, p_tmp, cp-p_tmp); + *(tmpbuffer + (cp-p_tmp)) = '\0'; + p_tmp = strrchr(tmpbuffer, ' '); + if (p_tmp) + ++p_tmp; + else + p_tmp = tmpbuffer; + len = strlen(p_tmp); + count = kallsyms_symbol_complete(p_tmp, + sizeof(tmpbuffer) - + (p_tmp - tmpbuffer)); + if (tab == 2 && count > 0) { + kdb_printf("\n%d symbols are found.", count); + if (count > dtab_count) { + count = dtab_count; + kdb_printf(" But only first %d symbols will" + " be printed.\nYou can change the" + " environment variable DTABCOUNT.", + count); + } + kdb_printf("\n"); + for (i = 0; i < count; i++) { + if (kallsyms_symbol_next(p_tmp, i) < 0) + break; + kdb_printf("%s ", p_tmp); + *(p_tmp + len) = '\0'; + } + if (i >= dtab_count) + kdb_printf("..."); + kdb_printf("\n"); + kdb_printf(kdb_prompt_str); + kdb_printf("%s", buffer); + } else if (tab != 2 && count > 0) { + len_tmp = strlen(p_tmp); + strncpy(p_tmp+len_tmp, cp, lastchar-cp+1); + len_tmp = strlen(p_tmp); + strncpy(cp, p_tmp+len, len_tmp-len + 1); + len = len_tmp - len; + kdb_printf("%s", cp); + cp += len; + lastchar += len; + } + kdb_nextline = 1; /* reset output line number */ + break; + default: + if (key >= 32 && lastchar < bufend) { + if (cp < lastchar) { + memcpy(tmpbuffer, cp, lastchar - cp); + memcpy(cp+1, tmpbuffer, lastchar - cp); + *++lastchar = '\0'; + *cp = key; + kdb_printf("%s\r", cp); + ++cp; + tmp = *cp; + *cp = '\0'; + kdb_printf(kdb_prompt_str); + kdb_printf("%s", buffer); + *cp = tmp; + } else { + *++lastchar = '\0'; + *cp++ = key; + /* The kgdb transition check will hide + * printed characters if we think that + * kgdb is connecting, until the check + * fails */ + if (!KDB_STATE(KGDB_TRANS)) + kgdb_transition_check(buffer); + else + kdb_printf("%c", key); + } + /* Special escape to kgdb */ + if (lastchar - buffer >= 5 && + strcmp(lastchar - 5, "$?#3f") == 0) { + strcpy(buffer, "kgdb"); + KDB_STATE_SET(DOING_KGDB); + return buffer; + } + if (lastchar - buffer >= 14 && + strcmp(lastchar - 14, "$qSupported#37") == 0) { + strcpy(buffer, "kgdb"); + KDB_STATE_SET(DOING_KGDB2); + return buffer; + } + } + break; + } + goto poll_again; +} + +/* + * kdb_getstr + * + * Print the prompt string and read a command from the + * input device. + * + * Parameters: + * buffer Address of buffer to receive command + * bufsize Size of buffer in bytes + * prompt Pointer to string to use as prompt string + * Returns: + * Pointer to command buffer. + * Locking: + * None. + * Remarks: + * For SMP kernels, the processor number will be + * substituted for %d, %x or %o in the prompt. + */ + +char *kdb_getstr(char *buffer, size_t bufsize, char *prompt) +{ + if (prompt && kdb_prompt_str != prompt) + strncpy(kdb_prompt_str, prompt, CMD_BUFLEN); + kdb_printf(kdb_prompt_str); + kdb_nextline = 1; /* Prompt and input resets line number */ + return kdb_read(buffer, bufsize); +} + +/* + * kdb_input_flush + * + * Get rid of any buffered console input. + * + * Parameters: + * none + * Returns: + * nothing + * Locking: + * none + * Remarks: + * Call this function whenever you want to flush input. If there is any + * outstanding input, it ignores all characters until there has been no + * data for approximately 1ms. + */ + +static void kdb_input_flush(void) +{ + get_char_func *f; + int res; + int flush_delay = 1; + while (flush_delay) { + flush_delay--; +empty: + touch_nmi_watchdog(); + for (f = &kdb_poll_funcs[0]; *f; ++f) { + res = (*f)(); + if (res != -1) { + flush_delay = 1; + goto empty; + } + } + if (flush_delay) + mdelay(1); + } +} + +/* + * kdb_printf + * + * Print a string to the output device(s). + * + * Parameters: + * printf-like format and optional args. + * Returns: + * 0 + * Locking: + * None. + * Remarks: + * use 'kdbcons->write()' to avoid polluting 'log_buf' with + * kdb output. + * + * If the user is doing a cmd args | grep srch + * then kdb_grepping_flag is set. + * In that case we need to accumulate full lines (ending in \n) before + * searching for the pattern. + */ + +static char kdb_buffer[256]; /* A bit too big to go on stack */ +static char *next_avail = kdb_buffer; +static int size_avail; +static int suspend_grep; + +/* + * search arg1 to see if it contains arg2 + * (kdmain.c provides flags for ^pat and pat$) + * + * return 1 for found, 0 for not found + */ +static int kdb_search_string(char *searched, char *searchfor) +{ + char firstchar, *cp; + int len1, len2; + + /* not counting the newline at the end of "searched" */ + len1 = strlen(searched)-1; + len2 = strlen(searchfor); + if (len1 < len2) + return 0; + if (kdb_grep_leading && kdb_grep_trailing && len1 != len2) + return 0; + if (kdb_grep_leading) { + if (!strncmp(searched, searchfor, len2)) + return 1; + } else if (kdb_grep_trailing) { + if (!strncmp(searched+len1-len2, searchfor, len2)) + return 1; + } else { + firstchar = *searchfor; + cp = searched; + while ((cp = strchr(cp, firstchar))) { + if (!strncmp(cp, searchfor, len2)) + return 1; + cp++; + } + } + return 0; +} + +int vkdb_printf(const char *fmt, va_list ap) +{ + int diag; + int linecount; + int logging, saved_loglevel = 0; + int saved_trap_printk; + int got_printf_lock = 0; + int retlen = 0; + int fnd, len; + char *cp, *cp2, *cphold = NULL, replaced_byte = ' '; + char *moreprompt = "more> "; + struct console *c = console_drivers; + static DEFINE_SPINLOCK(kdb_printf_lock); + unsigned long uninitialized_var(flags); + + preempt_disable(); + saved_trap_printk = kdb_trap_printk; + kdb_trap_printk = 0; + + /* Serialize kdb_printf if multiple cpus try to write at once. + * But if any cpu goes recursive in kdb, just print the output, + * even if it is interleaved with any other text. + */ + if (!KDB_STATE(PRINTF_LOCK)) { + KDB_STATE_SET(PRINTF_LOCK); + spin_lock_irqsave(&kdb_printf_lock, flags); + got_printf_lock = 1; + atomic_inc(&kdb_event); + } else { + __acquire(kdb_printf_lock); + } + + diag = kdbgetintenv("LINES", &linecount); + if (diag || linecount <= 1) + linecount = 24; + + diag = kdbgetintenv("LOGGING", &logging); + if (diag) + logging = 0; + + if (!kdb_grepping_flag || suspend_grep) { + /* normally, every vsnprintf starts a new buffer */ + next_avail = kdb_buffer; + size_avail = sizeof(kdb_buffer); + } + vsnprintf(next_avail, size_avail, fmt, ap); + + /* + * If kdb_parse() found that the command was cmd xxx | grep yyy + * then kdb_grepping_flag is set, and kdb_grep_string contains yyy + * + * Accumulate the print data up to a newline before searching it. + * (vsnprintf does null-terminate the string that it generates) + */ + + /* skip the search if prints are temporarily unconditional */ + if (!suspend_grep && kdb_grepping_flag) { + cp = strchr(kdb_buffer, '\n'); + if (!cp) { + /* + * Special cases that don't end with newlines + * but should be written without one: + * The "[nn]kdb> " prompt should + * appear at the front of the buffer. + * + * The "[nn]more " prompt should also be + * (MOREPROMPT -> moreprompt) + * written * but we print that ourselves, + * we set the suspend_grep flag to make + * it unconditional. + * + */ + if (next_avail == kdb_buffer) { + /* + * these should occur after a newline, + * so they will be at the front of the + * buffer + */ + cp2 = kdb_buffer; + len = strlen(kdb_prompt_str); + if (!strncmp(cp2, kdb_prompt_str, len)) { + /* + * We're about to start a new + * command, so we can go back + * to normal mode. + */ + kdb_grepping_flag = 0; + goto kdb_printit; + } + } + /* no newline; don't search/write the buffer + until one is there */ + len = strlen(kdb_buffer); + next_avail = kdb_buffer + len; + size_avail = sizeof(kdb_buffer) - len; + goto kdb_print_out; + } + + /* + * The newline is present; print through it or discard + * it, depending on the results of the search. + */ + cp++; /* to byte after the newline */ + replaced_byte = *cp; /* remember what/where it was */ + cphold = cp; + *cp = '\0'; /* end the string for our search */ + + /* + * We now have a newline at the end of the string + * Only continue with this output if it contains the + * search string. + */ + fnd = kdb_search_string(kdb_buffer, kdb_grep_string); + if (!fnd) { + /* + * At this point the complete line at the start + * of kdb_buffer can be discarded, as it does + * not contain what the user is looking for. + * Shift the buffer left. + */ + *cphold = replaced_byte; + strcpy(kdb_buffer, cphold); + len = strlen(kdb_buffer); + next_avail = kdb_buffer + len; + size_avail = sizeof(kdb_buffer) - len; + goto kdb_print_out; + } + /* + * at this point the string is a full line and + * should be printed, up to the null. + */ + } +kdb_printit: + + /* + * Write to all consoles. + */ + retlen = strlen(kdb_buffer); + if (!dbg_kdb_mode && kgdb_connected) { + gdbstub_msg_write(kdb_buffer, retlen); + } else { + if (!dbg_io_ops->is_console) { + len = strlen(kdb_buffer); + cp = kdb_buffer; + while (len--) { + dbg_io_ops->write_char(*cp); + cp++; + } + } + while (c) { + c->write(c, kdb_buffer, retlen); + touch_nmi_watchdog(); + c = c->next; + } + } + if (logging) { + saved_loglevel = console_loglevel; + console_loglevel = 0; + printk(KERN_INFO "%s", kdb_buffer); + } + + if (KDB_STATE(PAGER) && strchr(kdb_buffer, '\n')) + kdb_nextline++; + + /* check for having reached the LINES number of printed lines */ + if (kdb_nextline == linecount) { + char buf1[16] = ""; +#if defined(CONFIG_SMP) + char buf2[32]; +#endif + + /* Watch out for recursion here. Any routine that calls + * kdb_printf will come back through here. And kdb_read + * uses kdb_printf to echo on serial consoles ... + */ + kdb_nextline = 1; /* In case of recursion */ + + /* + * Pause until cr. + */ + moreprompt = kdbgetenv("MOREPROMPT"); + if (moreprompt == NULL) + moreprompt = "more> "; + +#if defined(CONFIG_SMP) + if (strchr(moreprompt, '%')) { + sprintf(buf2, moreprompt, get_cpu()); + put_cpu(); + moreprompt = buf2; + } +#endif + + kdb_input_flush(); + c = console_drivers; + + if (!dbg_io_ops->is_console) { + len = strlen(moreprompt); + cp = moreprompt; + while (len--) { + dbg_io_ops->write_char(*cp); + cp++; + } + } + while (c) { + c->write(c, moreprompt, strlen(moreprompt)); + touch_nmi_watchdog(); + c = c->next; + } + + if (logging) + printk("%s", moreprompt); + + kdb_read(buf1, 2); /* '2' indicates to return + * immediately after getting one key. */ + kdb_nextline = 1; /* Really set output line 1 */ + + /* empty and reset the buffer: */ + kdb_buffer[0] = '\0'; + next_avail = kdb_buffer; + size_avail = sizeof(kdb_buffer); + if ((buf1[0] == 'q') || (buf1[0] == 'Q')) { + /* user hit q or Q */ + KDB_FLAG_SET(CMD_INTERRUPT); /* command interrupted */ + KDB_STATE_CLEAR(PAGER); + /* end of command output; back to normal mode */ + kdb_grepping_flag = 0; + kdb_printf("\n"); + } else if (buf1[0] == ' ') { + kdb_printf("\n"); + suspend_grep = 1; /* for this recursion */ + } else if (buf1[0] == '\n') { + kdb_nextline = linecount - 1; + kdb_printf("\r"); + suspend_grep = 1; /* for this recursion */ + } else if (buf1[0] && buf1[0] != '\n') { + /* user hit something other than enter */ + suspend_grep = 1; /* for this recursion */ + kdb_printf("\nOnly 'q' or 'Q' are processed at more " + "prompt, input ignored\n"); + } else if (kdb_grepping_flag) { + /* user hit enter */ + suspend_grep = 1; /* for this recursion */ + kdb_printf("\n"); + } + kdb_input_flush(); + } + + /* + * For grep searches, shift the printed string left. + * replaced_byte contains the character that was overwritten with + * the terminating null, and cphold points to the null. + * Then adjust the notion of available space in the buffer. + */ + if (kdb_grepping_flag && !suspend_grep) { + *cphold = replaced_byte; + strcpy(kdb_buffer, cphold); + len = strlen(kdb_buffer); + next_avail = kdb_buffer + len; + size_avail = sizeof(kdb_buffer) - len; + } + +kdb_print_out: + suspend_grep = 0; /* end of what may have been a recursive call */ + if (logging) + console_loglevel = saved_loglevel; + if (KDB_STATE(PRINTF_LOCK) && got_printf_lock) { + got_printf_lock = 0; + spin_unlock_irqrestore(&kdb_printf_lock, flags); + KDB_STATE_CLEAR(PRINTF_LOCK); + atomic_dec(&kdb_event); + } else { + __release(kdb_printf_lock); + } + kdb_trap_printk = saved_trap_printk; + preempt_enable(); + return retlen; +} + +int kdb_printf(const char *fmt, ...) +{ + va_list ap; + int r; + + va_start(ap, fmt); + r = vkdb_printf(fmt, ap); + va_end(ap); + + return r; +} + diff --git a/kernel/debug/kdb/kdb_keyboard.c b/kernel/debug/kdb/kdb_keyboard.c new file mode 100644 index 00000000000..4bca634975c --- /dev/null +++ b/kernel/debug/kdb/kdb_keyboard.c @@ -0,0 +1,212 @@ +/* + * Kernel Debugger Architecture Dependent Console I/O handler + * + * This file is subject to the terms and conditions of the GNU General Public + * License. + * + * Copyright (c) 1999-2006 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (c) 2009 Wind River Systems, Inc. All Rights Reserved. + */ + +#include <linux/kdb.h> +#include <linux/keyboard.h> +#include <linux/ctype.h> +#include <linux/module.h> +#include <linux/io.h> + +/* Keyboard Controller Registers on normal PCs. */ + +#define KBD_STATUS_REG 0x64 /* Status register (R) */ +#define KBD_DATA_REG 0x60 /* Keyboard data register (R/W) */ + +/* Status Register Bits */ + +#define KBD_STAT_OBF 0x01 /* Keyboard output buffer full */ +#define KBD_STAT_MOUSE_OBF 0x20 /* Mouse output buffer full */ + +static int kbd_exists; + +/* + * Check if the keyboard controller has a keypress for us. + * Some parts (Enter Release, LED change) are still blocking polled here, + * but hopefully they are all short. + */ +int kdb_get_kbd_char(void) +{ + int scancode, scanstatus; + static int shift_lock; /* CAPS LOCK state (0-off, 1-on) */ + static int shift_key; /* Shift next keypress */ + static int ctrl_key; + u_short keychar; + + if (KDB_FLAG(NO_I8042) || KDB_FLAG(NO_VT_CONSOLE) || + (inb(KBD_STATUS_REG) == 0xff && inb(KBD_DATA_REG) == 0xff)) { + kbd_exists = 0; + return -1; + } + kbd_exists = 1; + + if ((inb(KBD_STATUS_REG) & KBD_STAT_OBF) == 0) + return -1; + + /* + * Fetch the scancode + */ + scancode = inb(KBD_DATA_REG); + scanstatus = inb(KBD_STATUS_REG); + + /* + * Ignore mouse events. + */ + if (scanstatus & KBD_STAT_MOUSE_OBF) + return -1; + + /* + * Ignore release, trigger on make + * (except for shift keys, where we want to + * keep the shift state so long as the key is + * held down). + */ + + if (((scancode&0x7f) == 0x2a) || ((scancode&0x7f) == 0x36)) { + /* + * Next key may use shift table + */ + if ((scancode & 0x80) == 0) + shift_key = 1; + else + shift_key = 0; + return -1; + } + + if ((scancode&0x7f) == 0x1d) { + /* + * Left ctrl key + */ + if ((scancode & 0x80) == 0) + ctrl_key = 1; + else + ctrl_key = 0; + return -1; + } + + if ((scancode & 0x80) != 0) + return -1; + + scancode &= 0x7f; + + /* + * Translate scancode + */ + + if (scancode == 0x3a) { + /* + * Toggle caps lock + */ + shift_lock ^= 1; + +#ifdef KDB_BLINK_LED + kdb_toggleled(0x4); +#endif + return -1; + } + + if (scancode == 0x0e) { + /* + * Backspace + */ + return 8; + } + + /* Special Key */ + switch (scancode) { + case 0xF: /* Tab */ + return 9; + case 0x53: /* Del */ + return 4; + case 0x47: /* Home */ + return 1; + case 0x4F: /* End */ + return 5; + case 0x4B: /* Left */ + return 2; + case 0x48: /* Up */ + return 16; + case 0x50: /* Down */ + return 14; + case 0x4D: /* Right */ + return 6; + } + + if (scancode == 0xe0) + return -1; + + /* + * For Japanese 86/106 keyboards + * See comment in drivers/char/pc_keyb.c. + * - Masahiro Adegawa + */ + if (scancode == 0x73) + scancode = 0x59; + else if (scancode == 0x7d) + scancode = 0x7c; + + if (!shift_lock && !shift_key && !ctrl_key) { + keychar = plain_map[scancode]; + } else if ((shift_lock || shift_key) && key_maps[1]) { + keychar = key_maps[1][scancode]; + } else if (ctrl_key && key_maps[4]) { + keychar = key_maps[4][scancode]; + } else { + keychar = 0x0020; + kdb_printf("Unknown state/scancode (%d)\n", scancode); + } + keychar &= 0x0fff; + if (keychar == '\t') + keychar = ' '; + switch (KTYP(keychar)) { + case KT_LETTER: + case KT_LATIN: + if (isprint(keychar)) + break; /* printable characters */ + /* drop through */ + case KT_SPEC: + if (keychar == K_ENTER) + break; + /* drop through */ + default: + return -1; /* ignore unprintables */ + } + + if ((scancode & 0x7f) == 0x1c) { + /* + * enter key. All done. Absorb the release scancode. + */ + while ((inb(KBD_STATUS_REG) & KBD_STAT_OBF) == 0) + ; + + /* + * Fetch the scancode + */ + scancode = inb(KBD_DATA_REG); + scanstatus = inb(KBD_STATUS_REG); + + while (scanstatus & KBD_STAT_MOUSE_OBF) { + scancode = inb(KBD_DATA_REG); + scanstatus = inb(KBD_STATUS_REG); + } + + if (scancode != 0x9c) { + /* + * Wasn't an enter-release, why not? + */ + kdb_printf("kdb: expected enter got 0x%x status 0x%x\n", + scancode, scanstatus); + } + + return 13; + } + + return keychar & 0xff; +} +EXPORT_SYMBOL_GPL(kdb_get_kbd_char); diff --git a/kernel/debug/kdb/kdb_main.c b/kernel/debug/kdb/kdb_main.c new file mode 100644 index 00000000000..b724c791b6d --- /dev/null +++ b/kernel/debug/kdb/kdb_main.c @@ -0,0 +1,2849 @@ +/* + * Kernel Debugger Architecture Independent Main Code + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1999-2004 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (C) 2000 Stephane Eranian <eranian@hpl.hp.com> + * Xscale (R) modifications copyright (C) 2003 Intel Corporation. + * Copyright (c) 2009 Wind River Systems, Inc. All Rights Reserved. + */ + +#include <linux/ctype.h> +#include <linux/string.h> +#include <linux/kernel.h> +#include <linux/reboot.h> +#include <linux/sched.h> +#include <linux/sysrq.h> +#include <linux/smp.h> +#include <linux/utsname.h> +#include <linux/vmalloc.h> +#include <linux/module.h> +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/kallsyms.h> +#include <linux/kgdb.h> +#include <linux/kdb.h> +#include <linux/notifier.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/nmi.h> +#include <linux/time.h> +#include <linux/ptrace.h> +#include <linux/sysctl.h> +#include <linux/cpu.h> +#include <linux/kdebug.h> +#include <linux/proc_fs.h> +#include <linux/uaccess.h> +#include <linux/slab.h> +#include "kdb_private.h" + +#define GREP_LEN 256 +char kdb_grep_string[GREP_LEN]; +int kdb_grepping_flag; +EXPORT_SYMBOL(kdb_grepping_flag); +int kdb_grep_leading; +int kdb_grep_trailing; + +/* + * Kernel debugger state flags + */ +int kdb_flags; +atomic_t kdb_event; + +/* + * kdb_lock protects updates to kdb_initial_cpu. Used to + * single thread processors through the kernel debugger. + */ +int kdb_initial_cpu = -1; /* cpu number that owns kdb */ +int kdb_nextline = 1; +int kdb_state; /* General KDB state */ + +struct task_struct *kdb_current_task; +EXPORT_SYMBOL(kdb_current_task); +struct pt_regs *kdb_current_regs; + +const char *kdb_diemsg; +static int kdb_go_count; +#ifdef CONFIG_KDB_CONTINUE_CATASTROPHIC +static unsigned int kdb_continue_catastrophic = + CONFIG_KDB_CONTINUE_CATASTROPHIC; +#else +static unsigned int kdb_continue_catastrophic; +#endif + +/* kdb_commands describes the available commands. */ +static kdbtab_t *kdb_commands; +#define KDB_BASE_CMD_MAX 50 +static int kdb_max_commands = KDB_BASE_CMD_MAX; +static kdbtab_t kdb_base_commands[50]; +#define for_each_kdbcmd(cmd, num) \ + for ((cmd) = kdb_base_commands, (num) = 0; \ + num < kdb_max_commands; \ + num == KDB_BASE_CMD_MAX ? cmd = kdb_commands : cmd++, num++) + +typedef struct _kdbmsg { + int km_diag; /* kdb diagnostic */ + char *km_msg; /* Corresponding message text */ +} kdbmsg_t; + +#define KDBMSG(msgnum, text) \ + { KDB_##msgnum, text } + +static kdbmsg_t kdbmsgs[] = { + KDBMSG(NOTFOUND, "Command Not Found"), + KDBMSG(ARGCOUNT, "Improper argument count, see usage."), + KDBMSG(BADWIDTH, "Illegal value for BYTESPERWORD use 1, 2, 4 or 8, " + "8 is only allowed on 64 bit systems"), + KDBMSG(BADRADIX, "Illegal value for RADIX use 8, 10 or 16"), + KDBMSG(NOTENV, "Cannot find environment variable"), + KDBMSG(NOENVVALUE, "Environment variable should have value"), + KDBMSG(NOTIMP, "Command not implemented"), + KDBMSG(ENVFULL, "Environment full"), + KDBMSG(ENVBUFFULL, "Environment buffer full"), + KDBMSG(TOOMANYBPT, "Too many breakpoints defined"), +#ifdef CONFIG_CPU_XSCALE + KDBMSG(TOOMANYDBREGS, "More breakpoints than ibcr registers defined"), +#else + KDBMSG(TOOMANYDBREGS, "More breakpoints than db registers defined"), +#endif + KDBMSG(DUPBPT, "Duplicate breakpoint address"), + KDBMSG(BPTNOTFOUND, "Breakpoint not found"), + KDBMSG(BADMODE, "Invalid IDMODE"), + KDBMSG(BADINT, "Illegal numeric value"), + KDBMSG(INVADDRFMT, "Invalid symbolic address format"), + KDBMSG(BADREG, "Invalid register name"), + KDBMSG(BADCPUNUM, "Invalid cpu number"), + KDBMSG(BADLENGTH, "Invalid length field"), + KDBMSG(NOBP, "No Breakpoint exists"), + KDBMSG(BADADDR, "Invalid address"), +}; +#undef KDBMSG + +static const int __nkdb_err = sizeof(kdbmsgs) / sizeof(kdbmsg_t); + + +/* + * Initial environment. This is all kept static and local to + * this file. We don't want to rely on the memory allocation + * mechanisms in the kernel, so we use a very limited allocate-only + * heap for new and altered environment variables. The entire + * environment is limited to a fixed number of entries (add more + * to __env[] if required) and a fixed amount of heap (add more to + * KDB_ENVBUFSIZE if required). + */ + +static char *__env[] = { +#if defined(CONFIG_SMP) + "PROMPT=[%d]kdb> ", + "MOREPROMPT=[%d]more> ", +#else + "PROMPT=kdb> ", + "MOREPROMPT=more> ", +#endif + "RADIX=16", + "MDCOUNT=8", /* lines of md output */ + "BTARGS=9", /* 9 possible args in bt */ + KDB_PLATFORM_ENV, + "DTABCOUNT=30", + "NOSECT=1", + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, +}; + +static const int __nenv = (sizeof(__env) / sizeof(char *)); + +struct task_struct *kdb_curr_task(int cpu) +{ + struct task_struct *p = curr_task(cpu); +#ifdef _TIF_MCA_INIT + if ((task_thread_info(p)->flags & _TIF_MCA_INIT) && KDB_TSK(cpu)) + p = krp->p; +#endif + return p; +} + +/* + * kdbgetenv - This function will return the character string value of + * an environment variable. + * Parameters: + * match A character string representing an environment variable. + * Returns: + * NULL No environment variable matches 'match' + * char* Pointer to string value of environment variable. + */ +char *kdbgetenv(const char *match) +{ + char **ep = __env; + int matchlen = strlen(match); + int i; + + for (i = 0; i < __nenv; i++) { + char *e = *ep++; + + if (!e) + continue; + + if ((strncmp(match, e, matchlen) == 0) + && ((e[matchlen] == '\0') + || (e[matchlen] == '='))) { + char *cp = strchr(e, '='); + return cp ? ++cp : ""; + } + } + return NULL; +} + +/* + * kdballocenv - This function is used to allocate bytes for + * environment entries. + * Parameters: + * match A character string representing a numeric value + * Outputs: + * *value the unsigned long representation of the env variable 'match' + * Returns: + * Zero on success, a kdb diagnostic on failure. + * Remarks: + * We use a static environment buffer (envbuffer) to hold the values + * of dynamically generated environment variables (see kdb_set). Buffer + * space once allocated is never free'd, so over time, the amount of space + * (currently 512 bytes) will be exhausted if env variables are changed + * frequently. + */ +static char *kdballocenv(size_t bytes) +{ +#define KDB_ENVBUFSIZE 512 + static char envbuffer[KDB_ENVBUFSIZE]; + static int envbufsize; + char *ep = NULL; + + if ((KDB_ENVBUFSIZE - envbufsize) >= bytes) { + ep = &envbuffer[envbufsize]; + envbufsize += bytes; + } + return ep; +} + +/* + * kdbgetulenv - This function will return the value of an unsigned + * long-valued environment variable. + * Parameters: + * match A character string representing a numeric value + * Outputs: + * *value the unsigned long represntation of the env variable 'match' + * Returns: + * Zero on success, a kdb diagnostic on failure. + */ +static int kdbgetulenv(const char *match, unsigned long *value) +{ + char *ep; + + ep = kdbgetenv(match); + if (!ep) + return KDB_NOTENV; + if (strlen(ep) == 0) + return KDB_NOENVVALUE; + + *value = simple_strtoul(ep, NULL, 0); + + return 0; +} + +/* + * kdbgetintenv - This function will return the value of an + * integer-valued environment variable. + * Parameters: + * match A character string representing an integer-valued env variable + * Outputs: + * *value the integer representation of the environment variable 'match' + * Returns: + * Zero on success, a kdb diagnostic on failure. + */ +int kdbgetintenv(const char *match, int *value) +{ + unsigned long val; + int diag; + + diag = kdbgetulenv(match, &val); + if (!diag) + *value = (int) val; + return diag; +} + +/* + * kdbgetularg - This function will convert a numeric string into an + * unsigned long value. + * Parameters: + * arg A character string representing a numeric value + * Outputs: + * *value the unsigned long represntation of arg. + * Returns: + * Zero on success, a kdb diagnostic on failure. + */ +int kdbgetularg(const char *arg, unsigned long *value) +{ + char *endp; + unsigned long val; + + val = simple_strtoul(arg, &endp, 0); + + if (endp == arg) { + /* + * Try base 16, for us folks too lazy to type the + * leading 0x... + */ + val = simple_strtoul(arg, &endp, 16); + if (endp == arg) + return KDB_BADINT; + } + + *value = val; + + return 0; +} + +/* + * kdb_set - This function implements the 'set' command. Alter an + * existing environment variable or create a new one. + */ +int kdb_set(int argc, const char **argv) +{ + int i; + char *ep; + size_t varlen, vallen; + + /* + * we can be invoked two ways: + * set var=value argv[1]="var", argv[2]="value" + * set var = value argv[1]="var", argv[2]="=", argv[3]="value" + * - if the latter, shift 'em down. + */ + if (argc == 3) { + argv[2] = argv[3]; + argc--; + } + + if (argc != 2) + return KDB_ARGCOUNT; + + /* + * Check for internal variables + */ + if (strcmp(argv[1], "KDBDEBUG") == 0) { + unsigned int debugflags; + char *cp; + + debugflags = simple_strtoul(argv[2], &cp, 0); + if (cp == argv[2] || debugflags & ~KDB_DEBUG_FLAG_MASK) { + kdb_printf("kdb: illegal debug flags '%s'\n", + argv[2]); + return 0; + } + kdb_flags = (kdb_flags & + ~(KDB_DEBUG_FLAG_MASK << KDB_DEBUG_FLAG_SHIFT)) + | (debugflags << KDB_DEBUG_FLAG_SHIFT); + + return 0; + } + + /* + * Tokenizer squashed the '=' sign. argv[1] is variable + * name, argv[2] = value. + */ + varlen = strlen(argv[1]); + vallen = strlen(argv[2]); + ep = kdballocenv(varlen + vallen + 2); + if (ep == (char *)0) + return KDB_ENVBUFFULL; + + sprintf(ep, "%s=%s", argv[1], argv[2]); + + ep[varlen+vallen+1] = '\0'; + + for (i = 0; i < __nenv; i++) { + if (__env[i] + && ((strncmp(__env[i], argv[1], varlen) == 0) + && ((__env[i][varlen] == '\0') + || (__env[i][varlen] == '=')))) { + __env[i] = ep; + return 0; + } + } + + /* + * Wasn't existing variable. Fit into slot. + */ + for (i = 0; i < __nenv-1; i++) { + if (__env[i] == (char *)0) { + __env[i] = ep; + return 0; + } + } + + return KDB_ENVFULL; +} + +static int kdb_check_regs(void) +{ + if (!kdb_current_regs) { + kdb_printf("No current kdb registers." + " You may need to select another task\n"); + return KDB_BADREG; + } + return 0; +} + +/* + * kdbgetaddrarg - This function is responsible for parsing an + * address-expression and returning the value of the expression, + * symbol name, and offset to the caller. + * + * The argument may consist of a numeric value (decimal or + * hexidecimal), a symbol name, a register name (preceeded by the + * percent sign), an environment variable with a numeric value + * (preceeded by a dollar sign) or a simple arithmetic expression + * consisting of a symbol name, +/-, and a numeric constant value + * (offset). + * Parameters: + * argc - count of arguments in argv + * argv - argument vector + * *nextarg - index to next unparsed argument in argv[] + * regs - Register state at time of KDB entry + * Outputs: + * *value - receives the value of the address-expression + * *offset - receives the offset specified, if any + * *name - receives the symbol name, if any + * *nextarg - index to next unparsed argument in argv[] + * Returns: + * zero is returned on success, a kdb diagnostic code is + * returned on error. + */ +int kdbgetaddrarg(int argc, const char **argv, int *nextarg, + unsigned long *value, long *offset, + char **name) +{ + unsigned long addr; + unsigned long off = 0; + int positive; + int diag; + int found = 0; + char *symname; + char symbol = '\0'; + char *cp; + kdb_symtab_t symtab; + + /* + * Process arguments which follow the following syntax: + * + * symbol | numeric-address [+/- numeric-offset] + * %register + * $environment-variable + */ + + if (*nextarg > argc) + return KDB_ARGCOUNT; + + symname = (char *)argv[*nextarg]; + + /* + * If there is no whitespace between the symbol + * or address and the '+' or '-' symbols, we + * remember the character and replace it with a + * null so the symbol/value can be properly parsed + */ + cp = strpbrk(symname, "+-"); + if (cp != NULL) { + symbol = *cp; + *cp++ = '\0'; + } + + if (symname[0] == '$') { + diag = kdbgetulenv(&symname[1], &addr); + if (diag) + return diag; + } else if (symname[0] == '%') { + diag = kdb_check_regs(); + if (diag) + return diag; + /* Implement register values with % at a later time as it is + * arch optional. + */ + return KDB_NOTIMP; + } else { + found = kdbgetsymval(symname, &symtab); + if (found) { + addr = symtab.sym_start; + } else { + diag = kdbgetularg(argv[*nextarg], &addr); + if (diag) + return diag; + } + } + + if (!found) + found = kdbnearsym(addr, &symtab); + + (*nextarg)++; + + if (name) + *name = symname; + if (value) + *value = addr; + if (offset && name && *name) + *offset = addr - symtab.sym_start; + + if ((*nextarg > argc) + && (symbol == '\0')) + return 0; + + /* + * check for +/- and offset + */ + + if (symbol == '\0') { + if ((argv[*nextarg][0] != '+') + && (argv[*nextarg][0] != '-')) { + /* + * Not our argument. Return. + */ + return 0; + } else { + positive = (argv[*nextarg][0] == '+'); + (*nextarg)++; + } + } else + positive = (symbol == '+'); + + /* + * Now there must be an offset! + */ + if ((*nextarg > argc) + && (symbol == '\0')) { + return KDB_INVADDRFMT; + } + + if (!symbol) { + cp = (char *)argv[*nextarg]; + (*nextarg)++; + } + + diag = kdbgetularg(cp, &off); + if (diag) + return diag; + + if (!positive) + off = -off; + + if (offset) + *offset += off; + + if (value) + *value += off; + + return 0; +} + +static void kdb_cmderror(int diag) +{ + int i; + + if (diag >= 0) { + kdb_printf("no error detected (diagnostic is %d)\n", diag); + return; + } + + for (i = 0; i < __nkdb_err; i++) { + if (kdbmsgs[i].km_diag == diag) { + kdb_printf("diag: %d: %s\n", diag, kdbmsgs[i].km_msg); + return; + } + } + + kdb_printf("Unknown diag %d\n", -diag); +} + +/* + * kdb_defcmd, kdb_defcmd2 - This function implements the 'defcmd' + * command which defines one command as a set of other commands, + * terminated by endefcmd. kdb_defcmd processes the initial + * 'defcmd' command, kdb_defcmd2 is invoked from kdb_parse for + * the following commands until 'endefcmd'. + * Inputs: + * argc argument count + * argv argument vector + * Returns: + * zero for success, a kdb diagnostic if error + */ +struct defcmd_set { + int count; + int usable; + char *name; + char *usage; + char *help; + char **command; +}; +static struct defcmd_set *defcmd_set; +static int defcmd_set_count; +static int defcmd_in_progress; + +/* Forward references */ +static int kdb_exec_defcmd(int argc, const char **argv); + +static int kdb_defcmd2(const char *cmdstr, const char *argv0) +{ + struct defcmd_set *s = defcmd_set + defcmd_set_count - 1; + char **save_command = s->command; + if (strcmp(argv0, "endefcmd") == 0) { + defcmd_in_progress = 0; + if (!s->count) + s->usable = 0; + if (s->usable) + kdb_register(s->name, kdb_exec_defcmd, + s->usage, s->help, 0); + return 0; + } + if (!s->usable) + return KDB_NOTIMP; + s->command = kmalloc((s->count + 1) * sizeof(*(s->command)), GFP_KDB); + if (!s->command) { + kdb_printf("Could not allocate new kdb_defcmd table for %s\n", + cmdstr); + s->usable = 0; + return KDB_NOTIMP; + } + memcpy(s->command, save_command, s->count * sizeof(*(s->command))); + s->command[s->count++] = kdb_strdup(cmdstr, GFP_KDB); + kfree(save_command); + return 0; +} + +static int kdb_defcmd(int argc, const char **argv) +{ + struct defcmd_set *save_defcmd_set = defcmd_set, *s; + if (defcmd_in_progress) { + kdb_printf("kdb: nested defcmd detected, assuming missing " + "endefcmd\n"); + kdb_defcmd2("endefcmd", "endefcmd"); + } + if (argc == 0) { + int i; + for (s = defcmd_set; s < defcmd_set + defcmd_set_count; ++s) { + kdb_printf("defcmd %s \"%s\" \"%s\"\n", s->name, + s->usage, s->help); + for (i = 0; i < s->count; ++i) + kdb_printf("%s", s->command[i]); + kdb_printf("endefcmd\n"); + } + return 0; + } + if (argc != 3) + return KDB_ARGCOUNT; + defcmd_set = kmalloc((defcmd_set_count + 1) * sizeof(*defcmd_set), + GFP_KDB); + if (!defcmd_set) { + kdb_printf("Could not allocate new defcmd_set entry for %s\n", + argv[1]); + defcmd_set = save_defcmd_set; + return KDB_NOTIMP; + } + memcpy(defcmd_set, save_defcmd_set, + defcmd_set_count * sizeof(*defcmd_set)); + kfree(save_defcmd_set); + s = defcmd_set + defcmd_set_count; + memset(s, 0, sizeof(*s)); + s->usable = 1; + s->name = kdb_strdup(argv[1], GFP_KDB); + s->usage = kdb_strdup(argv[2], GFP_KDB); + s->help = kdb_strdup(argv[3], GFP_KDB); + if (s->usage[0] == '"') { + strcpy(s->usage, s->usage+1); + s->usage[strlen(s->usage)-1] = '\0'; + } + if (s->help[0] == '"') { + strcpy(s->help, s->help+1); + s->help[strlen(s->help)-1] = '\0'; + } + ++defcmd_set_count; + defcmd_in_progress = 1; + return 0; +} + +/* + * kdb_exec_defcmd - Execute the set of commands associated with this + * defcmd name. + * Inputs: + * argc argument count + * argv argument vector + * Returns: + * zero for success, a kdb diagnostic if error + */ +static int kdb_exec_defcmd(int argc, const char **argv) +{ + int i, ret; + struct defcmd_set *s; + if (argc != 0) + return KDB_ARGCOUNT; + for (s = defcmd_set, i = 0; i < defcmd_set_count; ++i, ++s) { + if (strcmp(s->name, argv[0]) == 0) + break; + } + if (i == defcmd_set_count) { + kdb_printf("kdb_exec_defcmd: could not find commands for %s\n", + argv[0]); + return KDB_NOTIMP; + } + for (i = 0; i < s->count; ++i) { + /* Recursive use of kdb_parse, do not use argv after + * this point */ + argv = NULL; + kdb_printf("[%s]kdb> %s\n", s->name, s->command[i]); + ret = kdb_parse(s->command[i]); + if (ret) + return ret; + } + return 0; +} + +/* Command history */ +#define KDB_CMD_HISTORY_COUNT 32 +#define CMD_BUFLEN 200 /* kdb_printf: max printline + * size == 256 */ +static unsigned int cmd_head, cmd_tail; +static unsigned int cmdptr; +static char cmd_hist[KDB_CMD_HISTORY_COUNT][CMD_BUFLEN]; +static char cmd_cur[CMD_BUFLEN]; + +/* + * The "str" argument may point to something like | grep xyz + */ +static void parse_grep(const char *str) +{ + int len; + char *cp = (char *)str, *cp2; + + /* sanity check: we should have been called with the \ first */ + if (*cp != '|') + return; + cp++; + while (isspace(*cp)) + cp++; + if (strncmp(cp, "grep ", 5)) { + kdb_printf("invalid 'pipe', see grephelp\n"); + return; + } + cp += 5; + while (isspace(*cp)) + cp++; + cp2 = strchr(cp, '\n'); + if (cp2) + *cp2 = '\0'; /* remove the trailing newline */ + len = strlen(cp); + if (len == 0) { + kdb_printf("invalid 'pipe', see grephelp\n"); + return; + } + /* now cp points to a nonzero length search string */ + if (*cp == '"') { + /* allow it be "x y z" by removing the "'s - there must + be two of them */ + cp++; + cp2 = strchr(cp, '"'); + if (!cp2) { + kdb_printf("invalid quoted string, see grephelp\n"); + return; + } + *cp2 = '\0'; /* end the string where the 2nd " was */ + } + kdb_grep_leading = 0; + if (*cp == '^') { + kdb_grep_leading = 1; + cp++; + } + len = strlen(cp); + kdb_grep_trailing = 0; + if (*(cp+len-1) == '$') { + kdb_grep_trailing = 1; + *(cp+len-1) = '\0'; + } + len = strlen(cp); + if (!len) + return; + if (len >= GREP_LEN) { + kdb_printf("search string too long\n"); + return; + } + strcpy(kdb_grep_string, cp); + kdb_grepping_flag++; + return; +} + +/* + * kdb_parse - Parse the command line, search the command table for a + * matching command and invoke the command function. This + * function may be called recursively, if it is, the second call + * will overwrite argv and cbuf. It is the caller's + * responsibility to save their argv if they recursively call + * kdb_parse(). + * Parameters: + * cmdstr The input command line to be parsed. + * regs The registers at the time kdb was entered. + * Returns: + * Zero for success, a kdb diagnostic if failure. + * Remarks: + * Limited to 20 tokens. + * + * Real rudimentary tokenization. Basically only whitespace + * is considered a token delimeter (but special consideration + * is taken of the '=' sign as used by the 'set' command). + * + * The algorithm used to tokenize the input string relies on + * there being at least one whitespace (or otherwise useless) + * character between tokens as the character immediately following + * the token is altered in-place to a null-byte to terminate the + * token string. + */ + +#define MAXARGC 20 + +int kdb_parse(const char *cmdstr) +{ + static char *argv[MAXARGC]; + static int argc; + static char cbuf[CMD_BUFLEN+2]; + char *cp; + char *cpp, quoted; + kdbtab_t *tp; + int i, escaped, ignore_errors = 0, check_grep; + + /* + * First tokenize the command string. + */ + cp = (char *)cmdstr; + kdb_grepping_flag = check_grep = 0; + + if (KDB_FLAG(CMD_INTERRUPT)) { + /* Previous command was interrupted, newline must not + * repeat the command */ + KDB_FLAG_CLEAR(CMD_INTERRUPT); + KDB_STATE_SET(PAGER); + argc = 0; /* no repeat */ + } + + if (*cp != '\n' && *cp != '\0') { + argc = 0; + cpp = cbuf; + while (*cp) { + /* skip whitespace */ + while (isspace(*cp)) + cp++; + if ((*cp == '\0') || (*cp == '\n') || + (*cp == '#' && !defcmd_in_progress)) + break; + /* special case: check for | grep pattern */ + if (*cp == '|') { + check_grep++; + break; + } + if (cpp >= cbuf + CMD_BUFLEN) { + kdb_printf("kdb_parse: command buffer " + "overflow, command ignored\n%s\n", + cmdstr); + return KDB_NOTFOUND; + } + if (argc >= MAXARGC - 1) { + kdb_printf("kdb_parse: too many arguments, " + "command ignored\n%s\n", cmdstr); + return KDB_NOTFOUND; + } + argv[argc++] = cpp; + escaped = 0; + quoted = '\0'; + /* Copy to next unquoted and unescaped + * whitespace or '=' */ + while (*cp && *cp != '\n' && + (escaped || quoted || !isspace(*cp))) { + if (cpp >= cbuf + CMD_BUFLEN) + break; + if (escaped) { + escaped = 0; + *cpp++ = *cp++; + continue; + } + if (*cp == '\\') { + escaped = 1; + ++cp; + continue; + } + if (*cp == quoted) + quoted = '\0'; + else if (*cp == '\'' || *cp == '"') + quoted = *cp; + *cpp = *cp++; + if (*cpp == '=' && !quoted) + break; + ++cpp; + } + *cpp++ = '\0'; /* Squash a ws or '=' character */ + } + } + if (!argc) + return 0; + if (check_grep) + parse_grep(cp); + if (defcmd_in_progress) { + int result = kdb_defcmd2(cmdstr, argv[0]); + if (!defcmd_in_progress) { + argc = 0; /* avoid repeat on endefcmd */ + *(argv[0]) = '\0'; + } + return result; + } + if (argv[0][0] == '-' && argv[0][1] && + (argv[0][1] < '0' || argv[0][1] > '9')) { + ignore_errors = 1; + ++argv[0]; + } + + for_each_kdbcmd(tp, i) { + if (tp->cmd_name) { + /* + * If this command is allowed to be abbreviated, + * check to see if this is it. + */ + + if (tp->cmd_minlen + && (strlen(argv[0]) <= tp->cmd_minlen)) { + if (strncmp(argv[0], + tp->cmd_name, + tp->cmd_minlen) == 0) { + break; + } + } + + if (strcmp(argv[0], tp->cmd_name) == 0) + break; + } + } + + /* + * If we don't find a command by this name, see if the first + * few characters of this match any of the known commands. + * e.g., md1c20 should match md. + */ + if (i == kdb_max_commands) { + for_each_kdbcmd(tp, i) { + if (tp->cmd_name) { + if (strncmp(argv[0], + tp->cmd_name, + strlen(tp->cmd_name)) == 0) { + break; + } + } + } + } + + if (i < kdb_max_commands) { + int result; + KDB_STATE_SET(CMD); + result = (*tp->cmd_func)(argc-1, (const char **)argv); + if (result && ignore_errors && result > KDB_CMD_GO) + result = 0; + KDB_STATE_CLEAR(CMD); + switch (tp->cmd_repeat) { + case KDB_REPEAT_NONE: + argc = 0; + if (argv[0]) + *(argv[0]) = '\0'; + break; + case KDB_REPEAT_NO_ARGS: + argc = 1; + if (argv[1]) + *(argv[1]) = '\0'; + break; + case KDB_REPEAT_WITH_ARGS: + break; + } + return result; + } + + /* + * If the input with which we were presented does not + * map to an existing command, attempt to parse it as an + * address argument and display the result. Useful for + * obtaining the address of a variable, or the nearest symbol + * to an address contained in a register. + */ + { + unsigned long value; + char *name = NULL; + long offset; + int nextarg = 0; + + if (kdbgetaddrarg(0, (const char **)argv, &nextarg, + &value, &offset, &name)) { + return KDB_NOTFOUND; + } + + kdb_printf("%s = ", argv[0]); + kdb_symbol_print(value, NULL, KDB_SP_DEFAULT); + kdb_printf("\n"); + return 0; + } +} + + +static int handle_ctrl_cmd(char *cmd) +{ +#define CTRL_P 16 +#define CTRL_N 14 + + /* initial situation */ + if (cmd_head == cmd_tail) + return 0; + switch (*cmd) { + case CTRL_P: + if (cmdptr != cmd_tail) + cmdptr = (cmdptr-1) % KDB_CMD_HISTORY_COUNT; + strncpy(cmd_cur, cmd_hist[cmdptr], CMD_BUFLEN); + return 1; + case CTRL_N: + if (cmdptr != cmd_head) + cmdptr = (cmdptr+1) % KDB_CMD_HISTORY_COUNT; + strncpy(cmd_cur, cmd_hist[cmdptr], CMD_BUFLEN); + return 1; + } + return 0; +} + +/* + * kdb_reboot - This function implements the 'reboot' command. Reboot + * the system immediately, or loop for ever on failure. + */ +static int kdb_reboot(int argc, const char **argv) +{ + emergency_restart(); + kdb_printf("Hmm, kdb_reboot did not reboot, spinning here\n"); + while (1) + cpu_relax(); + /* NOTREACHED */ + return 0; +} + +static void kdb_dumpregs(struct pt_regs *regs) +{ + int old_lvl = console_loglevel; + console_loglevel = 15; + kdb_trap_printk++; + show_regs(regs); + kdb_trap_printk--; + kdb_printf("\n"); + console_loglevel = old_lvl; +} + +void kdb_set_current_task(struct task_struct *p) +{ + kdb_current_task = p; + + if (kdb_task_has_cpu(p)) { + kdb_current_regs = KDB_TSKREGS(kdb_process_cpu(p)); + return; + } + kdb_current_regs = NULL; +} + +/* + * kdb_local - The main code for kdb. This routine is invoked on a + * specific processor, it is not global. The main kdb() routine + * ensures that only one processor at a time is in this routine. + * This code is called with the real reason code on the first + * entry to a kdb session, thereafter it is called with reason + * SWITCH, even if the user goes back to the original cpu. + * Inputs: + * reason The reason KDB was invoked + * error The hardware-defined error code + * regs The exception frame at time of fault/breakpoint. + * db_result Result code from the break or debug point. + * Returns: + * 0 KDB was invoked for an event which it wasn't responsible + * 1 KDB handled the event for which it was invoked. + * KDB_CMD_GO User typed 'go'. + * KDB_CMD_CPU User switched to another cpu. + * KDB_CMD_SS Single step. + * KDB_CMD_SSB Single step until branch. + */ +static int kdb_local(kdb_reason_t reason, int error, struct pt_regs *regs, + kdb_dbtrap_t db_result) +{ + char *cmdbuf; + int diag; + struct task_struct *kdb_current = + kdb_curr_task(raw_smp_processor_id()); + + KDB_DEBUG_STATE("kdb_local 1", reason); + kdb_go_count = 0; + if (reason == KDB_REASON_DEBUG) { + /* special case below */ + } else { + kdb_printf("\nEntering kdb (current=0x%p, pid %d) ", + kdb_current, kdb_current->pid); +#if defined(CONFIG_SMP) + kdb_printf("on processor %d ", raw_smp_processor_id()); +#endif + } + + switch (reason) { + case KDB_REASON_DEBUG: + { + /* + * If re-entering kdb after a single step + * command, don't print the message. + */ + switch (db_result) { + case KDB_DB_BPT: + kdb_printf("\nEntering kdb (0x%p, pid %d) ", + kdb_current, kdb_current->pid); +#if defined(CONFIG_SMP) + kdb_printf("on processor %d ", raw_smp_processor_id()); +#endif + kdb_printf("due to Debug @ " kdb_machreg_fmt "\n", + instruction_pointer(regs)); + break; + case KDB_DB_SSB: + /* + * In the midst of ssb command. Just return. + */ + KDB_DEBUG_STATE("kdb_local 3", reason); + return KDB_CMD_SSB; /* Continue with SSB command */ + + break; + case KDB_DB_SS: + break; + case KDB_DB_SSBPT: + KDB_DEBUG_STATE("kdb_local 4", reason); + return 1; /* kdba_db_trap did the work */ + default: + kdb_printf("kdb: Bad result from kdba_db_trap: %d\n", + db_result); + break; + } + + } + break; + case KDB_REASON_ENTER: + if (KDB_STATE(KEYBOARD)) + kdb_printf("due to Keyboard Entry\n"); + else + kdb_printf("due to KDB_ENTER()\n"); + break; + case KDB_REASON_KEYBOARD: + KDB_STATE_SET(KEYBOARD); + kdb_printf("due to Keyboard Entry\n"); + break; + case KDB_REASON_ENTER_SLAVE: + /* drop through, slaves only get released via cpu switch */ + case KDB_REASON_SWITCH: + kdb_printf("due to cpu switch\n"); + break; + case KDB_REASON_OOPS: + kdb_printf("Oops: %s\n", kdb_diemsg); + kdb_printf("due to oops @ " kdb_machreg_fmt "\n", + instruction_pointer(regs)); + kdb_dumpregs(regs); + break; + case KDB_REASON_NMI: + kdb_printf("due to NonMaskable Interrupt @ " + kdb_machreg_fmt "\n", + instruction_pointer(regs)); + kdb_dumpregs(regs); + break; + case KDB_REASON_SSTEP: + case KDB_REASON_BREAK: + kdb_printf("due to %s @ " kdb_machreg_fmt "\n", + reason == KDB_REASON_BREAK ? + "Breakpoint" : "SS trap", instruction_pointer(regs)); + /* + * Determine if this breakpoint is one that we + * are interested in. + */ + if (db_result != KDB_DB_BPT) { + kdb_printf("kdb: error return from kdba_bp_trap: %d\n", + db_result); + KDB_DEBUG_STATE("kdb_local 6", reason); + return 0; /* Not for us, dismiss it */ + } + break; + case KDB_REASON_RECURSE: + kdb_printf("due to Recursion @ " kdb_machreg_fmt "\n", + instruction_pointer(regs)); + break; + default: + kdb_printf("kdb: unexpected reason code: %d\n", reason); + KDB_DEBUG_STATE("kdb_local 8", reason); + return 0; /* Not for us, dismiss it */ + } + + while (1) { + /* + * Initialize pager context. + */ + kdb_nextline = 1; + KDB_STATE_CLEAR(SUPPRESS); + + cmdbuf = cmd_cur; + *cmdbuf = '\0'; + *(cmd_hist[cmd_head]) = '\0'; + + if (KDB_FLAG(ONLY_DO_DUMP)) { + /* kdb is off but a catastrophic error requires a dump. + * Take the dump and reboot. + * Turn on logging so the kdb output appears in the log + * buffer in the dump. + */ + const char *setargs[] = { "set", "LOGGING", "1" }; + kdb_set(2, setargs); + kdb_reboot(0, NULL); + /*NOTREACHED*/ + } + +do_full_getstr: +#if defined(CONFIG_SMP) + snprintf(kdb_prompt_str, CMD_BUFLEN, kdbgetenv("PROMPT"), + raw_smp_processor_id()); +#else + snprintf(kdb_prompt_str, CMD_BUFLEN, kdbgetenv("PROMPT")); +#endif + if (defcmd_in_progress) + strncat(kdb_prompt_str, "[defcmd]", CMD_BUFLEN); + + /* + * Fetch command from keyboard + */ + cmdbuf = kdb_getstr(cmdbuf, CMD_BUFLEN, kdb_prompt_str); + if (*cmdbuf != '\n') { + if (*cmdbuf < 32) { + if (cmdptr == cmd_head) { + strncpy(cmd_hist[cmd_head], cmd_cur, + CMD_BUFLEN); + *(cmd_hist[cmd_head] + + strlen(cmd_hist[cmd_head])-1) = '\0'; + } + if (!handle_ctrl_cmd(cmdbuf)) + *(cmd_cur+strlen(cmd_cur)-1) = '\0'; + cmdbuf = cmd_cur; + goto do_full_getstr; + } else { + strncpy(cmd_hist[cmd_head], cmd_cur, + CMD_BUFLEN); + } + + cmd_head = (cmd_head+1) % KDB_CMD_HISTORY_COUNT; + if (cmd_head == cmd_tail) + cmd_tail = (cmd_tail+1) % KDB_CMD_HISTORY_COUNT; + } + + cmdptr = cmd_head; + diag = kdb_parse(cmdbuf); + if (diag == KDB_NOTFOUND) { + kdb_printf("Unknown kdb command: '%s'\n", cmdbuf); + diag = 0; + } + if (diag == KDB_CMD_GO + || diag == KDB_CMD_CPU + || diag == KDB_CMD_SS + || diag == KDB_CMD_SSB + || diag == KDB_CMD_KGDB) + break; + + if (diag) + kdb_cmderror(diag); + } + KDB_DEBUG_STATE("kdb_local 9", diag); + return diag; +} + + +/* + * kdb_print_state - Print the state data for the current processor + * for debugging. + * Inputs: + * text Identifies the debug point + * value Any integer value to be printed, e.g. reason code. + */ +void kdb_print_state(const char *text, int value) +{ + kdb_printf("state: %s cpu %d value %d initial %d state %x\n", + text, raw_smp_processor_id(), value, kdb_initial_cpu, + kdb_state); +} + +/* + * kdb_main_loop - After initial setup and assignment of the + * controlling cpu, all cpus are in this loop. One cpu is in + * control and will issue the kdb prompt, the others will spin + * until 'go' or cpu switch. + * + * To get a consistent view of the kernel stacks for all + * processes, this routine is invoked from the main kdb code via + * an architecture specific routine. kdba_main_loop is + * responsible for making the kernel stacks consistent for all + * processes, there should be no difference between a blocked + * process and a running process as far as kdb is concerned. + * Inputs: + * reason The reason KDB was invoked + * error The hardware-defined error code + * reason2 kdb's current reason code. + * Initially error but can change + * acording to kdb state. + * db_result Result code from break or debug point. + * regs The exception frame at time of fault/breakpoint. + * should always be valid. + * Returns: + * 0 KDB was invoked for an event which it wasn't responsible + * 1 KDB handled the event for which it was invoked. + */ +int kdb_main_loop(kdb_reason_t reason, kdb_reason_t reason2, int error, + kdb_dbtrap_t db_result, struct pt_regs *regs) +{ + int result = 1; + /* Stay in kdb() until 'go', 'ss[b]' or an error */ + while (1) { + /* + * All processors except the one that is in control + * will spin here. + */ + KDB_DEBUG_STATE("kdb_main_loop 1", reason); + while (KDB_STATE(HOLD_CPU)) { + /* state KDB is turned off by kdb_cpu to see if the + * other cpus are still live, each cpu in this loop + * turns it back on. + */ + if (!KDB_STATE(KDB)) + KDB_STATE_SET(KDB); + } + + KDB_STATE_CLEAR(SUPPRESS); + KDB_DEBUG_STATE("kdb_main_loop 2", reason); + if (KDB_STATE(LEAVING)) + break; /* Another cpu said 'go' */ + /* Still using kdb, this processor is in control */ + result = kdb_local(reason2, error, regs, db_result); + KDB_DEBUG_STATE("kdb_main_loop 3", result); + + if (result == KDB_CMD_CPU) + break; + + if (result == KDB_CMD_SS) { + KDB_STATE_SET(DOING_SS); + break; + } + + if (result == KDB_CMD_SSB) { + KDB_STATE_SET(DOING_SS); + KDB_STATE_SET(DOING_SSB); + break; + } + + if (result == KDB_CMD_KGDB) { + if (!(KDB_STATE(DOING_KGDB) || KDB_STATE(DOING_KGDB2))) + kdb_printf("Entering please attach debugger " + "or use $D#44+ or $3#33\n"); + break; + } + if (result && result != 1 && result != KDB_CMD_GO) + kdb_printf("\nUnexpected kdb_local return code %d\n", + result); + KDB_DEBUG_STATE("kdb_main_loop 4", reason); + break; + } + if (KDB_STATE(DOING_SS)) + KDB_STATE_CLEAR(SSBPT); + + return result; +} + +/* + * kdb_mdr - This function implements the guts of the 'mdr', memory + * read command. + * mdr <addr arg>,<byte count> + * Inputs: + * addr Start address + * count Number of bytes + * Returns: + * Always 0. Any errors are detected and printed by kdb_getarea. + */ +static int kdb_mdr(unsigned long addr, unsigned int count) +{ + unsigned char c; + while (count--) { + if (kdb_getarea(c, addr)) + return 0; + kdb_printf("%02x", c); + addr++; + } + kdb_printf("\n"); + return 0; +} + +/* + * kdb_md - This function implements the 'md', 'md1', 'md2', 'md4', + * 'md8' 'mdr' and 'mds' commands. + * + * md|mds [<addr arg> [<line count> [<radix>]]] + * mdWcN [<addr arg> [<line count> [<radix>]]] + * where W = is the width (1, 2, 4 or 8) and N is the count. + * for eg., md1c20 reads 20 bytes, 1 at a time. + * mdr <addr arg>,<byte count> + */ +static void kdb_md_line(const char *fmtstr, unsigned long addr, + int symbolic, int nosect, int bytesperword, + int num, int repeat, int phys) +{ + /* print just one line of data */ + kdb_symtab_t symtab; + char cbuf[32]; + char *c = cbuf; + int i; + unsigned long word; + + memset(cbuf, '\0', sizeof(cbuf)); + if (phys) + kdb_printf("phys " kdb_machreg_fmt0 " ", addr); + else + kdb_printf(kdb_machreg_fmt0 " ", addr); + + for (i = 0; i < num && repeat--; i++) { + if (phys) { + if (kdb_getphysword(&word, addr, bytesperword)) + break; + } else if (kdb_getword(&word, addr, bytesperword)) + break; + kdb_printf(fmtstr, word); + if (symbolic) + kdbnearsym(word, &symtab); + else + memset(&symtab, 0, sizeof(symtab)); + if (symtab.sym_name) { + kdb_symbol_print(word, &symtab, 0); + if (!nosect) { + kdb_printf("\n"); + kdb_printf(" %s %s " + kdb_machreg_fmt " " + kdb_machreg_fmt " " + kdb_machreg_fmt, symtab.mod_name, + symtab.sec_name, symtab.sec_start, + symtab.sym_start, symtab.sym_end); + } + addr += bytesperword; + } else { + union { + u64 word; + unsigned char c[8]; + } wc; + unsigned char *cp; +#ifdef __BIG_ENDIAN + cp = wc.c + 8 - bytesperword; +#else + cp = wc.c; +#endif + wc.word = word; +#define printable_char(c) \ + ({unsigned char __c = c; isascii(__c) && isprint(__c) ? __c : '.'; }) + switch (bytesperword) { + case 8: + *c++ = printable_char(*cp++); + *c++ = printable_char(*cp++); + *c++ = printable_char(*cp++); + *c++ = printable_char(*cp++); + addr += 4; + case 4: + *c++ = printable_char(*cp++); + *c++ = printable_char(*cp++); + addr += 2; + case 2: + *c++ = printable_char(*cp++); + addr++; + case 1: + *c++ = printable_char(*cp++); + addr++; + break; + } +#undef printable_char + } + } + kdb_printf("%*s %s\n", (int)((num-i)*(2*bytesperword + 1)+1), + " ", cbuf); +} + +static int kdb_md(int argc, const char **argv) +{ + static unsigned long last_addr; + static int last_radix, last_bytesperword, last_repeat; + int radix = 16, mdcount = 8, bytesperword = KDB_WORD_SIZE, repeat; + int nosect = 0; + char fmtchar, fmtstr[64]; + unsigned long addr; + unsigned long word; + long offset = 0; + int symbolic = 0; + int valid = 0; + int phys = 0; + + kdbgetintenv("MDCOUNT", &mdcount); + kdbgetintenv("RADIX", &radix); + kdbgetintenv("BYTESPERWORD", &bytesperword); + + /* Assume 'md <addr>' and start with environment values */ + repeat = mdcount * 16 / bytesperword; + + if (strcmp(argv[0], "mdr") == 0) { + if (argc != 2) + return KDB_ARGCOUNT; + valid = 1; + } else if (isdigit(argv[0][2])) { + bytesperword = (int)(argv[0][2] - '0'); + if (bytesperword == 0) { + bytesperword = last_bytesperword; + if (bytesperword == 0) + bytesperword = 4; + } + last_bytesperword = bytesperword; + repeat = mdcount * 16 / bytesperword; + if (!argv[0][3]) + valid = 1; + else if (argv[0][3] == 'c' && argv[0][4]) { + char *p; + repeat = simple_strtoul(argv[0] + 4, &p, 10); + mdcount = ((repeat * bytesperword) + 15) / 16; + valid = !*p; + } + last_repeat = repeat; + } else if (strcmp(argv[0], "md") == 0) + valid = 1; + else if (strcmp(argv[0], "mds") == 0) + valid = 1; + else if (strcmp(argv[0], "mdp") == 0) { + phys = valid = 1; + } + if (!valid) + return KDB_NOTFOUND; + + if (argc == 0) { + if (last_addr == 0) + return KDB_ARGCOUNT; + addr = last_addr; + radix = last_radix; + bytesperword = last_bytesperword; + repeat = last_repeat; + mdcount = ((repeat * bytesperword) + 15) / 16; + } + + if (argc) { + unsigned long val; + int diag, nextarg = 1; + diag = kdbgetaddrarg(argc, argv, &nextarg, &addr, + &offset, NULL); + if (diag) + return diag; + if (argc > nextarg+2) + return KDB_ARGCOUNT; + + if (argc >= nextarg) { + diag = kdbgetularg(argv[nextarg], &val); + if (!diag) { + mdcount = (int) val; + repeat = mdcount * 16 / bytesperword; + } + } + if (argc >= nextarg+1) { + diag = kdbgetularg(argv[nextarg+1], &val); + if (!diag) + radix = (int) val; + } + } + + if (strcmp(argv[0], "mdr") == 0) + return kdb_mdr(addr, mdcount); + + switch (radix) { + case 10: + fmtchar = 'd'; + break; + case 16: + fmtchar = 'x'; + break; + case 8: + fmtchar = 'o'; + break; + default: + return KDB_BADRADIX; + } + + last_radix = radix; + + if (bytesperword > KDB_WORD_SIZE) + return KDB_BADWIDTH; + + switch (bytesperword) { + case 8: + sprintf(fmtstr, "%%16.16l%c ", fmtchar); + break; + case 4: + sprintf(fmtstr, "%%8.8l%c ", fmtchar); + break; + case 2: + sprintf(fmtstr, "%%4.4l%c ", fmtchar); + break; + case 1: + sprintf(fmtstr, "%%2.2l%c ", fmtchar); + break; + default: + return KDB_BADWIDTH; + } + + last_repeat = repeat; + last_bytesperword = bytesperword; + + if (strcmp(argv[0], "mds") == 0) { + symbolic = 1; + /* Do not save these changes as last_*, they are temporary mds + * overrides. + */ + bytesperword = KDB_WORD_SIZE; + repeat = mdcount; + kdbgetintenv("NOSECT", &nosect); + } + + /* Round address down modulo BYTESPERWORD */ + + addr &= ~(bytesperword-1); + + while (repeat > 0) { + unsigned long a; + int n, z, num = (symbolic ? 1 : (16 / bytesperword)); + + if (KDB_FLAG(CMD_INTERRUPT)) + return 0; + for (a = addr, z = 0; z < repeat; a += bytesperword, ++z) { + if (phys) { + if (kdb_getphysword(&word, a, bytesperword) + || word) + break; + } else if (kdb_getword(&word, a, bytesperword) || word) + break; + } + n = min(num, repeat); + kdb_md_line(fmtstr, addr, symbolic, nosect, bytesperword, + num, repeat, phys); + addr += bytesperword * n; + repeat -= n; + z = (z + num - 1) / num; + if (z > 2) { + int s = num * (z-2); + kdb_printf(kdb_machreg_fmt0 "-" kdb_machreg_fmt0 + " zero suppressed\n", + addr, addr + bytesperword * s - 1); + addr += bytesperword * s; + repeat -= s; + } + } + last_addr = addr; + + return 0; +} + +/* + * kdb_mm - This function implements the 'mm' command. + * mm address-expression new-value + * Remarks: + * mm works on machine words, mmW works on bytes. + */ +static int kdb_mm(int argc, const char **argv) +{ + int diag; + unsigned long addr; + long offset = 0; + unsigned long contents; + int nextarg; + int width; + + if (argv[0][2] && !isdigit(argv[0][2])) + return KDB_NOTFOUND; + + if (argc < 2) + return KDB_ARGCOUNT; + + nextarg = 1; + diag = kdbgetaddrarg(argc, argv, &nextarg, &addr, &offset, NULL); + if (diag) + return diag; + + if (nextarg > argc) + return KDB_ARGCOUNT; + diag = kdbgetaddrarg(argc, argv, &nextarg, &contents, NULL, NULL); + if (diag) + return diag; + + if (nextarg != argc + 1) + return KDB_ARGCOUNT; + + width = argv[0][2] ? (argv[0][2] - '0') : (KDB_WORD_SIZE); + diag = kdb_putword(addr, contents, width); + if (diag) + return diag; + + kdb_printf(kdb_machreg_fmt " = " kdb_machreg_fmt "\n", addr, contents); + + return 0; +} + +/* + * kdb_go - This function implements the 'go' command. + * go [address-expression] + */ +static int kdb_go(int argc, const char **argv) +{ + unsigned long addr; + int diag; + int nextarg; + long offset; + + if (argc == 1) { + if (raw_smp_processor_id() != kdb_initial_cpu) { + kdb_printf("go <address> must be issued from the " + "initial cpu, do cpu %d first\n", + kdb_initial_cpu); + return KDB_ARGCOUNT; + } + nextarg = 1; + diag = kdbgetaddrarg(argc, argv, &nextarg, + &addr, &offset, NULL); + if (diag) + return diag; + } else if (argc) { + return KDB_ARGCOUNT; + } + + diag = KDB_CMD_GO; + if (KDB_FLAG(CATASTROPHIC)) { + kdb_printf("Catastrophic error detected\n"); + kdb_printf("kdb_continue_catastrophic=%d, ", + kdb_continue_catastrophic); + if (kdb_continue_catastrophic == 0 && kdb_go_count++ == 0) { + kdb_printf("type go a second time if you really want " + "to continue\n"); + return 0; + } + if (kdb_continue_catastrophic == 2) { + kdb_printf("forcing reboot\n"); + kdb_reboot(0, NULL); + } + kdb_printf("attempting to continue\n"); + } + return diag; +} + +/* + * kdb_rd - This function implements the 'rd' command. + */ +static int kdb_rd(int argc, const char **argv) +{ + int diag = kdb_check_regs(); + if (diag) + return diag; + + kdb_dumpregs(kdb_current_regs); + return 0; +} + +/* + * kdb_rm - This function implements the 'rm' (register modify) command. + * rm register-name new-contents + * Remarks: + * Currently doesn't allow modification of control or + * debug registers. + */ +static int kdb_rm(int argc, const char **argv) +{ + int diag; + int ind = 0; + unsigned long contents; + + if (argc != 2) + return KDB_ARGCOUNT; + /* + * Allow presence or absence of leading '%' symbol. + */ + if (argv[1][0] == '%') + ind = 1; + + diag = kdbgetularg(argv[2], &contents); + if (diag) + return diag; + + diag = kdb_check_regs(); + if (diag) + return diag; + kdb_printf("ERROR: Register set currently not implemented\n"); + return 0; +} + +#if defined(CONFIG_MAGIC_SYSRQ) +/* + * kdb_sr - This function implements the 'sr' (SYSRQ key) command + * which interfaces to the soi-disant MAGIC SYSRQ functionality. + * sr <magic-sysrq-code> + */ +static int kdb_sr(int argc, const char **argv) +{ + if (argc != 1) + return KDB_ARGCOUNT; + sysrq_toggle_support(1); + kdb_trap_printk++; + handle_sysrq(*argv[1], NULL); + kdb_trap_printk--; + + return 0; +} +#endif /* CONFIG_MAGIC_SYSRQ */ + +/* + * kdb_ef - This function implements the 'regs' (display exception + * frame) command. This command takes an address and expects to + * find an exception frame at that address, formats and prints + * it. + * regs address-expression + * Remarks: + * Not done yet. + */ +static int kdb_ef(int argc, const char **argv) +{ + int diag; + unsigned long addr; + long offset; + int nextarg; + + if (argc != 1) + return KDB_ARGCOUNT; + + nextarg = 1; + diag = kdbgetaddrarg(argc, argv, &nextarg, &addr, &offset, NULL); + if (diag) + return diag; + show_regs((struct pt_regs *)addr); + return 0; +} + +#if defined(CONFIG_MODULES) +/* modules using other modules */ +struct module_use { + struct list_head list; + struct module *module_which_uses; +}; + +/* + * kdb_lsmod - This function implements the 'lsmod' command. Lists + * currently loaded kernel modules. + * Mostly taken from userland lsmod. + */ +static int kdb_lsmod(int argc, const char **argv) +{ + struct module *mod; + + if (argc != 0) + return KDB_ARGCOUNT; + + kdb_printf("Module Size modstruct Used by\n"); + list_for_each_entry(mod, kdb_modules, list) { + + kdb_printf("%-20s%8u 0x%p ", mod->name, + mod->core_size, (void *)mod); +#ifdef CONFIG_MODULE_UNLOAD + kdb_printf("%4d ", module_refcount(mod)); +#endif + if (mod->state == MODULE_STATE_GOING) + kdb_printf(" (Unloading)"); + else if (mod->state == MODULE_STATE_COMING) + kdb_printf(" (Loading)"); + else + kdb_printf(" (Live)"); + +#ifdef CONFIG_MODULE_UNLOAD + { + struct module_use *use; + kdb_printf(" [ "); + list_for_each_entry(use, &mod->modules_which_use_me, + list) + kdb_printf("%s ", use->module_which_uses->name); + kdb_printf("]\n"); + } +#endif + } + + return 0; +} + +#endif /* CONFIG_MODULES */ + +/* + * kdb_env - This function implements the 'env' command. Display the + * current environment variables. + */ + +static int kdb_env(int argc, const char **argv) +{ + int i; + + for (i = 0; i < __nenv; i++) { + if (__env[i]) + kdb_printf("%s\n", __env[i]); + } + + if (KDB_DEBUG(MASK)) + kdb_printf("KDBFLAGS=0x%x\n", kdb_flags); + + return 0; +} + +#ifdef CONFIG_PRINTK +/* + * kdb_dmesg - This function implements the 'dmesg' command to display + * the contents of the syslog buffer. + * dmesg [lines] [adjust] + */ +static int kdb_dmesg(int argc, const char **argv) +{ + char *syslog_data[4], *start, *end, c = '\0', *p; + int diag, logging, logsize, lines = 0, adjust = 0, n; + + if (argc > 2) + return KDB_ARGCOUNT; + if (argc) { + char *cp; + lines = simple_strtol(argv[1], &cp, 0); + if (*cp) + lines = 0; + if (argc > 1) { + adjust = simple_strtoul(argv[2], &cp, 0); + if (*cp || adjust < 0) + adjust = 0; + } + } + + /* disable LOGGING if set */ + diag = kdbgetintenv("LOGGING", &logging); + if (!diag && logging) { + const char *setargs[] = { "set", "LOGGING", "0" }; + kdb_set(2, setargs); + } + + /* syslog_data[0,1] physical start, end+1. syslog_data[2,3] + * logical start, end+1. */ + kdb_syslog_data(syslog_data); + if (syslog_data[2] == syslog_data[3]) + return 0; + logsize = syslog_data[1] - syslog_data[0]; + start = syslog_data[2]; + end = syslog_data[3]; +#define KDB_WRAP(p) (((p - syslog_data[0]) % logsize) + syslog_data[0]) + for (n = 0, p = start; p < end; ++p) { + c = *KDB_WRAP(p); + if (c == '\n') + ++n; + } + if (c != '\n') + ++n; + if (lines < 0) { + if (adjust >= n) + kdb_printf("buffer only contains %d lines, nothing " + "printed\n", n); + else if (adjust - lines >= n) + kdb_printf("buffer only contains %d lines, last %d " + "lines printed\n", n, n - adjust); + if (adjust) { + for (; start < end && adjust; ++start) { + if (*KDB_WRAP(start) == '\n') + --adjust; + } + if (start < end) + ++start; + } + for (p = start; p < end && lines; ++p) { + if (*KDB_WRAP(p) == '\n') + ++lines; + } + end = p; + } else if (lines > 0) { + int skip = n - (adjust + lines); + if (adjust >= n) { + kdb_printf("buffer only contains %d lines, " + "nothing printed\n", n); + skip = n; + } else if (skip < 0) { + lines += skip; + skip = 0; + kdb_printf("buffer only contains %d lines, first " + "%d lines printed\n", n, lines); + } + for (; start < end && skip; ++start) { + if (*KDB_WRAP(start) == '\n') + --skip; + } + for (p = start; p < end && lines; ++p) { + if (*KDB_WRAP(p) == '\n') + --lines; + } + end = p; + } + /* Do a line at a time (max 200 chars) to reduce protocol overhead */ + c = '\n'; + while (start != end) { + char buf[201]; + p = buf; + if (KDB_FLAG(CMD_INTERRUPT)) + return 0; + while (start < end && (c = *KDB_WRAP(start)) && + (p - buf) < sizeof(buf)-1) { + ++start; + *p++ = c; + if (c == '\n') + break; + } + *p = '\0'; + kdb_printf("%s", buf); + } + if (c != '\n') + kdb_printf("\n"); + + return 0; +} +#endif /* CONFIG_PRINTK */ +/* + * kdb_cpu - This function implements the 'cpu' command. + * cpu [<cpunum>] + * Returns: + * KDB_CMD_CPU for success, a kdb diagnostic if error + */ +static void kdb_cpu_status(void) +{ + int i, start_cpu, first_print = 1; + char state, prev_state = '?'; + + kdb_printf("Currently on cpu %d\n", raw_smp_processor_id()); + kdb_printf("Available cpus: "); + for (start_cpu = -1, i = 0; i < NR_CPUS; i++) { + if (!cpu_online(i)) { + state = 'F'; /* cpu is offline */ + } else { + state = ' '; /* cpu is responding to kdb */ + if (kdb_task_state_char(KDB_TSK(i)) == 'I') + state = 'I'; /* idle task */ + } + if (state != prev_state) { + if (prev_state != '?') { + if (!first_print) + kdb_printf(", "); + first_print = 0; + kdb_printf("%d", start_cpu); + if (start_cpu < i-1) + kdb_printf("-%d", i-1); + if (prev_state != ' ') + kdb_printf("(%c)", prev_state); + } + prev_state = state; + start_cpu = i; + } + } + /* print the trailing cpus, ignoring them if they are all offline */ + if (prev_state != 'F') { + if (!first_print) + kdb_printf(", "); + kdb_printf("%d", start_cpu); + if (start_cpu < i-1) + kdb_printf("-%d", i-1); + if (prev_state != ' ') + kdb_printf("(%c)", prev_state); + } + kdb_printf("\n"); +} + +static int kdb_cpu(int argc, const char **argv) +{ + unsigned long cpunum; + int diag; + + if (argc == 0) { + kdb_cpu_status(); + return 0; + } + + if (argc != 1) + return KDB_ARGCOUNT; + + diag = kdbgetularg(argv[1], &cpunum); + if (diag) + return diag; + + /* + * Validate cpunum + */ + if ((cpunum > NR_CPUS) || !cpu_online(cpunum)) + return KDB_BADCPUNUM; + + dbg_switch_cpu = cpunum; + + /* + * Switch to other cpu + */ + return KDB_CMD_CPU; +} + +/* The user may not realize that ps/bta with no parameters does not print idle + * or sleeping system daemon processes, so tell them how many were suppressed. + */ +void kdb_ps_suppressed(void) +{ + int idle = 0, daemon = 0; + unsigned long mask_I = kdb_task_state_string("I"), + mask_M = kdb_task_state_string("M"); + unsigned long cpu; + const struct task_struct *p, *g; + for_each_online_cpu(cpu) { + p = kdb_curr_task(cpu); + if (kdb_task_state(p, mask_I)) + ++idle; + } + kdb_do_each_thread(g, p) { + if (kdb_task_state(p, mask_M)) + ++daemon; + } kdb_while_each_thread(g, p); + if (idle || daemon) { + if (idle) + kdb_printf("%d idle process%s (state I)%s\n", + idle, idle == 1 ? "" : "es", + daemon ? " and " : ""); + if (daemon) + kdb_printf("%d sleeping system daemon (state M) " + "process%s", daemon, + daemon == 1 ? "" : "es"); + kdb_printf(" suppressed,\nuse 'ps A' to see all.\n"); + } +} + +/* + * kdb_ps - This function implements the 'ps' command which shows a + * list of the active processes. + * ps [DRSTCZEUIMA] All processes, optionally filtered by state + */ +void kdb_ps1(const struct task_struct *p) +{ + int cpu; + unsigned long tmp; + + if (!p || probe_kernel_read(&tmp, (char *)p, sizeof(unsigned long))) + return; + + cpu = kdb_process_cpu(p); + kdb_printf("0x%p %8d %8d %d %4d %c 0x%p %c%s\n", + (void *)p, p->pid, p->parent->pid, + kdb_task_has_cpu(p), kdb_process_cpu(p), + kdb_task_state_char(p), + (void *)(&p->thread), + p == kdb_curr_task(raw_smp_processor_id()) ? '*' : ' ', + p->comm); + if (kdb_task_has_cpu(p)) { + if (!KDB_TSK(cpu)) { + kdb_printf(" Error: no saved data for this cpu\n"); + } else { + if (KDB_TSK(cpu) != p) + kdb_printf(" Error: does not match running " + "process table (0x%p)\n", KDB_TSK(cpu)); + } + } +} + +static int kdb_ps(int argc, const char **argv) +{ + struct task_struct *g, *p; + unsigned long mask, cpu; + + if (argc == 0) + kdb_ps_suppressed(); + kdb_printf("%-*s Pid Parent [*] cpu State %-*s Command\n", + (int)(2*sizeof(void *))+2, "Task Addr", + (int)(2*sizeof(void *))+2, "Thread"); + mask = kdb_task_state_string(argc ? argv[1] : NULL); + /* Run the active tasks first */ + for_each_online_cpu(cpu) { + if (KDB_FLAG(CMD_INTERRUPT)) + return 0; + p = kdb_curr_task(cpu); + if (kdb_task_state(p, mask)) + kdb_ps1(p); + } + kdb_printf("\n"); + /* Now the real tasks */ + kdb_do_each_thread(g, p) { + if (KDB_FLAG(CMD_INTERRUPT)) + return 0; + if (kdb_task_state(p, mask)) + kdb_ps1(p); + } kdb_while_each_thread(g, p); + + return 0; +} + +/* + * kdb_pid - This function implements the 'pid' command which switches + * the currently active process. + * pid [<pid> | R] + */ +static int kdb_pid(int argc, const char **argv) +{ + struct task_struct *p; + unsigned long val; + int diag; + + if (argc > 1) + return KDB_ARGCOUNT; + + if (argc) { + if (strcmp(argv[1], "R") == 0) { + p = KDB_TSK(kdb_initial_cpu); + } else { + diag = kdbgetularg(argv[1], &val); + if (diag) + return KDB_BADINT; + + p = find_task_by_pid_ns((pid_t)val, &init_pid_ns); + if (!p) { + kdb_printf("No task with pid=%d\n", (pid_t)val); + return 0; + } + } + kdb_set_current_task(p); + } + kdb_printf("KDB current process is %s(pid=%d)\n", + kdb_current_task->comm, + kdb_current_task->pid); + + return 0; +} + +/* + * kdb_ll - This function implements the 'll' command which follows a + * linked list and executes an arbitrary command for each + * element. + */ +static int kdb_ll(int argc, const char **argv) +{ + int diag; + unsigned long addr; + long offset = 0; + unsigned long va; + unsigned long linkoffset; + int nextarg; + const char *command; + + if (argc != 3) + return KDB_ARGCOUNT; + + nextarg = 1; + diag = kdbgetaddrarg(argc, argv, &nextarg, &addr, &offset, NULL); + if (diag) + return diag; + + diag = kdbgetularg(argv[2], &linkoffset); + if (diag) + return diag; + + /* + * Using the starting address as + * the first element in the list, and assuming that + * the list ends with a null pointer. + */ + + va = addr; + command = kdb_strdup(argv[3], GFP_KDB); + if (!command) { + kdb_printf("%s: cannot duplicate command\n", __func__); + return 0; + } + /* Recursive use of kdb_parse, do not use argv after this point */ + argv = NULL; + + while (va) { + char buf[80]; + + sprintf(buf, "%s " kdb_machreg_fmt "\n", command, va); + diag = kdb_parse(buf); + if (diag) + return diag; + + addr = va + linkoffset; + if (kdb_getword(&va, addr, sizeof(va))) + return 0; + } + kfree(command); + + return 0; +} + +static int kdb_kgdb(int argc, const char **argv) +{ + return KDB_CMD_KGDB; +} + +/* + * kdb_help - This function implements the 'help' and '?' commands. + */ +static int kdb_help(int argc, const char **argv) +{ + kdbtab_t *kt; + int i; + + kdb_printf("%-15.15s %-20.20s %s\n", "Command", "Usage", "Description"); + kdb_printf("-----------------------------" + "-----------------------------\n"); + for_each_kdbcmd(kt, i) { + if (kt->cmd_name) + kdb_printf("%-15.15s %-20.20s %s\n", kt->cmd_name, + kt->cmd_usage, kt->cmd_help); + if (KDB_FLAG(CMD_INTERRUPT)) + return 0; + } + return 0; +} + +/* + * kdb_kill - This function implements the 'kill' commands. + */ +static int kdb_kill(int argc, const char **argv) +{ + long sig, pid; + char *endp; + struct task_struct *p; + struct siginfo info; + + if (argc != 2) + return KDB_ARGCOUNT; + + sig = simple_strtol(argv[1], &endp, 0); + if (*endp) + return KDB_BADINT; + if (sig >= 0) { + kdb_printf("Invalid signal parameter.<-signal>\n"); + return 0; + } + sig = -sig; + + pid = simple_strtol(argv[2], &endp, 0); + if (*endp) + return KDB_BADINT; + if (pid <= 0) { + kdb_printf("Process ID must be large than 0.\n"); + return 0; + } + + /* Find the process. */ + p = find_task_by_pid_ns(pid, &init_pid_ns); + if (!p) { + kdb_printf("The specified process isn't found.\n"); + return 0; + } + p = p->group_leader; + info.si_signo = sig; + info.si_errno = 0; + info.si_code = SI_USER; + info.si_pid = pid; /* same capabilities as process being signalled */ + info.si_uid = 0; /* kdb has root authority */ + kdb_send_sig_info(p, &info); + return 0; +} + +struct kdb_tm { + int tm_sec; /* seconds */ + int tm_min; /* minutes */ + int tm_hour; /* hours */ + int tm_mday; /* day of the month */ + int tm_mon; /* month */ + int tm_year; /* year */ +}; + +static void kdb_gmtime(struct timespec *tv, struct kdb_tm *tm) +{ + /* This will work from 1970-2099, 2100 is not a leap year */ + static int mon_day[] = { 31, 29, 31, 30, 31, 30, 31, + 31, 30, 31, 30, 31 }; + memset(tm, 0, sizeof(*tm)); + tm->tm_sec = tv->tv_sec % (24 * 60 * 60); + tm->tm_mday = tv->tv_sec / (24 * 60 * 60) + + (2 * 365 + 1); /* shift base from 1970 to 1968 */ + tm->tm_min = tm->tm_sec / 60 % 60; + tm->tm_hour = tm->tm_sec / 60 / 60; + tm->tm_sec = tm->tm_sec % 60; + tm->tm_year = 68 + 4*(tm->tm_mday / (4*365+1)); + tm->tm_mday %= (4*365+1); + mon_day[1] = 29; + while (tm->tm_mday >= mon_day[tm->tm_mon]) { + tm->tm_mday -= mon_day[tm->tm_mon]; + if (++tm->tm_mon == 12) { + tm->tm_mon = 0; + ++tm->tm_year; + mon_day[1] = 28; + } + } + ++tm->tm_mday; +} + +/* + * Most of this code has been lifted from kernel/timer.c::sys_sysinfo(). + * I cannot call that code directly from kdb, it has an unconditional + * cli()/sti() and calls routines that take locks which can stop the debugger. + */ +static void kdb_sysinfo(struct sysinfo *val) +{ + struct timespec uptime; + do_posix_clock_monotonic_gettime(&uptime); + memset(val, 0, sizeof(*val)); + val->uptime = uptime.tv_sec; + val->loads[0] = avenrun[0]; + val->loads[1] = avenrun[1]; + val->loads[2] = avenrun[2]; + val->procs = nr_threads-1; + si_meminfo(val); + + return; +} + +/* + * kdb_summary - This function implements the 'summary' command. + */ +static int kdb_summary(int argc, const char **argv) +{ + struct kdb_tm tm; + struct sysinfo val; + + if (argc) + return KDB_ARGCOUNT; + + kdb_printf("sysname %s\n", init_uts_ns.name.sysname); + kdb_printf("release %s\n", init_uts_ns.name.release); + kdb_printf("version %s\n", init_uts_ns.name.version); + kdb_printf("machine %s\n", init_uts_ns.name.machine); + kdb_printf("nodename %s\n", init_uts_ns.name.nodename); + kdb_printf("domainname %s\n", init_uts_ns.name.domainname); + kdb_printf("ccversion %s\n", __stringify(CCVERSION)); + + kdb_gmtime(&xtime, &tm); + kdb_printf("date %04d-%02d-%02d %02d:%02d:%02d " + "tz_minuteswest %d\n", + 1900+tm.tm_year, tm.tm_mon+1, tm.tm_mday, + tm.tm_hour, tm.tm_min, tm.tm_sec, + sys_tz.tz_minuteswest); + + kdb_sysinfo(&val); + kdb_printf("uptime "); + if (val.uptime > (24*60*60)) { + int days = val.uptime / (24*60*60); + val.uptime %= (24*60*60); + kdb_printf("%d day%s ", days, days == 1 ? "" : "s"); + } + kdb_printf("%02ld:%02ld\n", val.uptime/(60*60), (val.uptime/60)%60); + + /* lifted from fs/proc/proc_misc.c::loadavg_read_proc() */ + +#define LOAD_INT(x) ((x) >> FSHIFT) +#define LOAD_FRAC(x) LOAD_INT(((x) & (FIXED_1-1)) * 100) + kdb_printf("load avg %ld.%02ld %ld.%02ld %ld.%02ld\n", + LOAD_INT(val.loads[0]), LOAD_FRAC(val.loads[0]), + LOAD_INT(val.loads[1]), LOAD_FRAC(val.loads[1]), + LOAD_INT(val.loads[2]), LOAD_FRAC(val.loads[2])); +#undef LOAD_INT +#undef LOAD_FRAC + /* Display in kilobytes */ +#define K(x) ((x) << (PAGE_SHIFT - 10)) + kdb_printf("\nMemTotal: %8lu kB\nMemFree: %8lu kB\n" + "Buffers: %8lu kB\n", + val.totalram, val.freeram, val.bufferram); + return 0; +} + +/* + * kdb_per_cpu - This function implements the 'per_cpu' command. + */ +static int kdb_per_cpu(int argc, const char **argv) +{ + char buf[256], fmtstr[64]; + kdb_symtab_t symtab; + cpumask_t suppress = CPU_MASK_NONE; + int cpu, diag; + unsigned long addr, val, bytesperword = 0, whichcpu = ~0UL; + + if (argc < 1 || argc > 3) + return KDB_ARGCOUNT; + + snprintf(buf, sizeof(buf), "per_cpu__%s", argv[1]); + if (!kdbgetsymval(buf, &symtab)) { + kdb_printf("%s is not a per_cpu variable\n", argv[1]); + return KDB_BADADDR; + } + if (argc >= 2) { + diag = kdbgetularg(argv[2], &bytesperword); + if (diag) + return diag; + } + if (!bytesperword) + bytesperword = KDB_WORD_SIZE; + else if (bytesperword > KDB_WORD_SIZE) + return KDB_BADWIDTH; + sprintf(fmtstr, "%%0%dlx ", (int)(2*bytesperword)); + if (argc >= 3) { + diag = kdbgetularg(argv[3], &whichcpu); + if (diag) + return diag; + if (!cpu_online(whichcpu)) { + kdb_printf("cpu %ld is not online\n", whichcpu); + return KDB_BADCPUNUM; + } + } + + /* Most architectures use __per_cpu_offset[cpu], some use + * __per_cpu_offset(cpu), smp has no __per_cpu_offset. + */ +#ifdef __per_cpu_offset +#define KDB_PCU(cpu) __per_cpu_offset(cpu) +#else +#ifdef CONFIG_SMP +#define KDB_PCU(cpu) __per_cpu_offset[cpu] +#else +#define KDB_PCU(cpu) 0 +#endif +#endif + + for_each_online_cpu(cpu) { + if (whichcpu != ~0UL && whichcpu != cpu) + continue; + addr = symtab.sym_start + KDB_PCU(cpu); + diag = kdb_getword(&val, addr, bytesperword); + if (diag) { + kdb_printf("%5d " kdb_bfd_vma_fmt0 " - unable to " + "read, diag=%d\n", cpu, addr, diag); + continue; + } +#ifdef CONFIG_SMP + if (!val) { + cpu_set(cpu, suppress); + continue; + } +#endif /* CONFIG_SMP */ + kdb_printf("%5d ", cpu); + kdb_md_line(fmtstr, addr, + bytesperword == KDB_WORD_SIZE, + 1, bytesperword, 1, 1, 0); + } + if (cpus_weight(suppress) == 0) + return 0; + kdb_printf("Zero suppressed cpu(s):"); + for (cpu = first_cpu(suppress); cpu < num_possible_cpus(); + cpu = next_cpu(cpu, suppress)) { + kdb_printf(" %d", cpu); + if (cpu == num_possible_cpus() - 1 || + next_cpu(cpu, suppress) != cpu + 1) + continue; + while (cpu < num_possible_cpus() && + next_cpu(cpu, suppress) == cpu + 1) + ++cpu; + kdb_printf("-%d", cpu); + } + kdb_printf("\n"); + +#undef KDB_PCU + + return 0; +} + +/* + * display help for the use of cmd | grep pattern + */ +static int kdb_grep_help(int argc, const char **argv) +{ + kdb_printf("Usage of cmd args | grep pattern:\n"); + kdb_printf(" Any command's output may be filtered through an "); + kdb_printf("emulated 'pipe'.\n"); + kdb_printf(" 'grep' is just a key word.\n"); + kdb_printf(" The pattern may include a very limited set of " + "metacharacters:\n"); + kdb_printf(" pattern or ^pattern or pattern$ or ^pattern$\n"); + kdb_printf(" And if there are spaces in the pattern, you may " + "quote it:\n"); + kdb_printf(" \"pat tern\" or \"^pat tern\" or \"pat tern$\"" + " or \"^pat tern$\"\n"); + return 0; +} + +/* + * kdb_register_repeat - This function is used to register a kernel + * debugger command. + * Inputs: + * cmd Command name + * func Function to execute the command + * usage A simple usage string showing arguments + * help A simple help string describing command + * repeat Does the command auto repeat on enter? + * Returns: + * zero for success, one if a duplicate command. + */ +#define kdb_command_extend 50 /* arbitrary */ +int kdb_register_repeat(char *cmd, + kdb_func_t func, + char *usage, + char *help, + short minlen, + kdb_repeat_t repeat) +{ + int i; + kdbtab_t *kp; + + /* + * Brute force method to determine duplicates + */ + for_each_kdbcmd(kp, i) { + if (kp->cmd_name && (strcmp(kp->cmd_name, cmd) == 0)) { + kdb_printf("Duplicate kdb command registered: " + "%s, func %p help %s\n", cmd, func, help); + return 1; + } + } + + /* + * Insert command into first available location in table + */ + for_each_kdbcmd(kp, i) { + if (kp->cmd_name == NULL) + break; + } + + if (i >= kdb_max_commands) { + kdbtab_t *new = kmalloc((kdb_max_commands - KDB_BASE_CMD_MAX + + kdb_command_extend) * sizeof(*new), GFP_KDB); + if (!new) { + kdb_printf("Could not allocate new kdb_command " + "table\n"); + return 1; + } + if (kdb_commands) { + memcpy(new, kdb_commands, + kdb_max_commands * sizeof(*new)); + kfree(kdb_commands); + } + memset(new + kdb_max_commands, 0, + kdb_command_extend * sizeof(*new)); + kdb_commands = new; + kp = kdb_commands + kdb_max_commands; + kdb_max_commands += kdb_command_extend; + } + + kp->cmd_name = cmd; + kp->cmd_func = func; + kp->cmd_usage = usage; + kp->cmd_help = help; + kp->cmd_flags = 0; + kp->cmd_minlen = minlen; + kp->cmd_repeat = repeat; + + return 0; +} + +/* + * kdb_register - Compatibility register function for commands that do + * not need to specify a repeat state. Equivalent to + * kdb_register_repeat with KDB_REPEAT_NONE. + * Inputs: + * cmd Command name + * func Function to execute the command + * usage A simple usage string showing arguments + * help A simple help string describing command + * Returns: + * zero for success, one if a duplicate command. + */ +int kdb_register(char *cmd, + kdb_func_t func, + char *usage, + char *help, + short minlen) +{ + return kdb_register_repeat(cmd, func, usage, help, minlen, + KDB_REPEAT_NONE); +} + +/* + * kdb_unregister - This function is used to unregister a kernel + * debugger command. It is generally called when a module which + * implements kdb commands is unloaded. + * Inputs: + * cmd Command name + * Returns: + * zero for success, one command not registered. + */ +int kdb_unregister(char *cmd) +{ + int i; + kdbtab_t *kp; + + /* + * find the command. + */ + for (i = 0, kp = kdb_commands; i < kdb_max_commands; i++, kp++) { + if (kp->cmd_name && (strcmp(kp->cmd_name, cmd) == 0)) { + kp->cmd_name = NULL; + return 0; + } + } + + /* Couldn't find it. */ + return 1; +} + +/* Initialize the kdb command table. */ +static void __init kdb_inittab(void) +{ + int i; + kdbtab_t *kp; + + for_each_kdbcmd(kp, i) + kp->cmd_name = NULL; + + kdb_register_repeat("md", kdb_md, "<vaddr>", + "Display Memory Contents, also mdWcN, e.g. md8c1", 1, + KDB_REPEAT_NO_ARGS); + kdb_register_repeat("mdr", kdb_md, "<vaddr> <bytes>", + "Display Raw Memory", 0, KDB_REPEAT_NO_ARGS); + kdb_register_repeat("mdp", kdb_md, "<paddr> <bytes>", + "Display Physical Memory", 0, KDB_REPEAT_NO_ARGS); + kdb_register_repeat("mds", kdb_md, "<vaddr>", + "Display Memory Symbolically", 0, KDB_REPEAT_NO_ARGS); + kdb_register_repeat("mm", kdb_mm, "<vaddr> <contents>", + "Modify Memory Contents", 0, KDB_REPEAT_NO_ARGS); + kdb_register_repeat("go", kdb_go, "[<vaddr>]", + "Continue Execution", 1, KDB_REPEAT_NONE); + kdb_register_repeat("rd", kdb_rd, "", + "Display Registers", 0, KDB_REPEAT_NONE); + kdb_register_repeat("rm", kdb_rm, "<reg> <contents>", + "Modify Registers", 0, KDB_REPEAT_NONE); + kdb_register_repeat("ef", kdb_ef, "<vaddr>", + "Display exception frame", 0, KDB_REPEAT_NONE); + kdb_register_repeat("bt", kdb_bt, "[<vaddr>]", + "Stack traceback", 1, KDB_REPEAT_NONE); + kdb_register_repeat("btp", kdb_bt, "<pid>", + "Display stack for process <pid>", 0, KDB_REPEAT_NONE); + kdb_register_repeat("bta", kdb_bt, "[DRSTCZEUIMA]", + "Display stack all processes", 0, KDB_REPEAT_NONE); + kdb_register_repeat("btc", kdb_bt, "", + "Backtrace current process on each cpu", 0, KDB_REPEAT_NONE); + kdb_register_repeat("btt", kdb_bt, "<vaddr>", + "Backtrace process given its struct task address", 0, + KDB_REPEAT_NONE); + kdb_register_repeat("ll", kdb_ll, "<first-element> <linkoffset> <cmd>", + "Execute cmd for each element in linked list", 0, KDB_REPEAT_NONE); + kdb_register_repeat("env", kdb_env, "", + "Show environment variables", 0, KDB_REPEAT_NONE); + kdb_register_repeat("set", kdb_set, "", + "Set environment variables", 0, KDB_REPEAT_NONE); + kdb_register_repeat("help", kdb_help, "", + "Display Help Message", 1, KDB_REPEAT_NONE); + kdb_register_repeat("?", kdb_help, "", + "Display Help Message", 0, KDB_REPEAT_NONE); + kdb_register_repeat("cpu", kdb_cpu, "<cpunum>", + "Switch to new cpu", 0, KDB_REPEAT_NONE); + kdb_register_repeat("kgdb", kdb_kgdb, "", + "Enter kgdb mode", 0, KDB_REPEAT_NONE); + kdb_register_repeat("ps", kdb_ps, "[<flags>|A]", + "Display active task list", 0, KDB_REPEAT_NONE); + kdb_register_repeat("pid", kdb_pid, "<pidnum>", + "Switch to another task", 0, KDB_REPEAT_NONE); + kdb_register_repeat("reboot", kdb_reboot, "", + "Reboot the machine immediately", 0, KDB_REPEAT_NONE); +#if defined(CONFIG_MODULES) + kdb_register_repeat("lsmod", kdb_lsmod, "", + "List loaded kernel modules", 0, KDB_REPEAT_NONE); +#endif +#if defined(CONFIG_MAGIC_SYSRQ) + kdb_register_repeat("sr", kdb_sr, "<key>", + "Magic SysRq key", 0, KDB_REPEAT_NONE); +#endif +#if defined(CONFIG_PRINTK) + kdb_register_repeat("dmesg", kdb_dmesg, "[lines]", + "Display syslog buffer", 0, KDB_REPEAT_NONE); +#endif + kdb_register_repeat("defcmd", kdb_defcmd, "name \"usage\" \"help\"", + "Define a set of commands, down to endefcmd", 0, KDB_REPEAT_NONE); + kdb_register_repeat("kill", kdb_kill, "<-signal> <pid>", + "Send a signal to a process", 0, KDB_REPEAT_NONE); + kdb_register_repeat("summary", kdb_summary, "", + "Summarize the system", 4, KDB_REPEAT_NONE); + kdb_register_repeat("per_cpu", kdb_per_cpu, "", + "Display per_cpu variables", 3, KDB_REPEAT_NONE); + kdb_register_repeat("grephelp", kdb_grep_help, "", + "Display help on | grep", 0, KDB_REPEAT_NONE); +} + +/* Execute any commands defined in kdb_cmds. */ +static void __init kdb_cmd_init(void) +{ + int i, diag; + for (i = 0; kdb_cmds[i]; ++i) { + diag = kdb_parse(kdb_cmds[i]); + if (diag) + kdb_printf("kdb command %s failed, kdb diag %d\n", + kdb_cmds[i], diag); + } + if (defcmd_in_progress) { + kdb_printf("Incomplete 'defcmd' set, forcing endefcmd\n"); + kdb_parse("endefcmd"); + } +} + +/* Intialize kdb_printf, breakpoint tables and kdb state */ +void __init kdb_init(int lvl) +{ + static int kdb_init_lvl = KDB_NOT_INITIALIZED; + int i; + + if (kdb_init_lvl == KDB_INIT_FULL || lvl <= kdb_init_lvl) + return; + for (i = kdb_init_lvl; i < lvl; i++) { + switch (i) { + case KDB_NOT_INITIALIZED: + kdb_inittab(); /* Initialize Command Table */ + kdb_initbptab(); /* Initialize Breakpoints */ + break; + case KDB_INIT_EARLY: + kdb_cmd_init(); /* Build kdb_cmds tables */ + break; + } + } + kdb_init_lvl = lvl; +} diff --git a/kernel/debug/kdb/kdb_private.h b/kernel/debug/kdb/kdb_private.h new file mode 100644 index 00000000000..97d3ba69775 --- /dev/null +++ b/kernel/debug/kdb/kdb_private.h @@ -0,0 +1,300 @@ +#ifndef _KDBPRIVATE_H +#define _KDBPRIVATE_H + +/* + * Kernel Debugger Architecture Independent Private Headers + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 2000-2004 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (c) 2009 Wind River Systems, Inc. All Rights Reserved. + */ + +#include <linux/kgdb.h> +#include "../debug_core.h" + +/* Kernel Debugger Error codes. Must not overlap with command codes. */ +#define KDB_NOTFOUND (-1) +#define KDB_ARGCOUNT (-2) +#define KDB_BADWIDTH (-3) +#define KDB_BADRADIX (-4) +#define KDB_NOTENV (-5) +#define KDB_NOENVVALUE (-6) +#define KDB_NOTIMP (-7) +#define KDB_ENVFULL (-8) +#define KDB_ENVBUFFULL (-9) +#define KDB_TOOMANYBPT (-10) +#define KDB_TOOMANYDBREGS (-11) +#define KDB_DUPBPT (-12) +#define KDB_BPTNOTFOUND (-13) +#define KDB_BADMODE (-14) +#define KDB_BADINT (-15) +#define KDB_INVADDRFMT (-16) +#define KDB_BADREG (-17) +#define KDB_BADCPUNUM (-18) +#define KDB_BADLENGTH (-19) +#define KDB_NOBP (-20) +#define KDB_BADADDR (-21) + +/* Kernel Debugger Command codes. Must not overlap with error codes. */ +#define KDB_CMD_GO (-1001) +#define KDB_CMD_CPU (-1002) +#define KDB_CMD_SS (-1003) +#define KDB_CMD_SSB (-1004) +#define KDB_CMD_KGDB (-1005) +#define KDB_CMD_KGDB2 (-1006) + +/* Internal debug flags */ +#define KDB_DEBUG_FLAG_BP 0x0002 /* Breakpoint subsystem debug */ +#define KDB_DEBUG_FLAG_BB_SUMM 0x0004 /* Basic block analysis, summary only */ +#define KDB_DEBUG_FLAG_AR 0x0008 /* Activation record, generic */ +#define KDB_DEBUG_FLAG_ARA 0x0010 /* Activation record, arch specific */ +#define KDB_DEBUG_FLAG_BB 0x0020 /* All basic block analysis */ +#define KDB_DEBUG_FLAG_STATE 0x0040 /* State flags */ +#define KDB_DEBUG_FLAG_MASK 0xffff /* All debug flags */ +#define KDB_DEBUG_FLAG_SHIFT 16 /* Shift factor for dbflags */ + +#define KDB_DEBUG(flag) (kdb_flags & \ + (KDB_DEBUG_FLAG_##flag << KDB_DEBUG_FLAG_SHIFT)) +#define KDB_DEBUG_STATE(text, value) if (KDB_DEBUG(STATE)) \ + kdb_print_state(text, value) + +#if BITS_PER_LONG == 32 + +#define KDB_PLATFORM_ENV "BYTESPERWORD=4" + +#define kdb_machreg_fmt "0x%lx" +#define kdb_machreg_fmt0 "0x%08lx" +#define kdb_bfd_vma_fmt "0x%lx" +#define kdb_bfd_vma_fmt0 "0x%08lx" +#define kdb_elfw_addr_fmt "0x%x" +#define kdb_elfw_addr_fmt0 "0x%08x" +#define kdb_f_count_fmt "%d" + +#elif BITS_PER_LONG == 64 + +#define KDB_PLATFORM_ENV "BYTESPERWORD=8" + +#define kdb_machreg_fmt "0x%lx" +#define kdb_machreg_fmt0 "0x%016lx" +#define kdb_bfd_vma_fmt "0x%lx" +#define kdb_bfd_vma_fmt0 "0x%016lx" +#define kdb_elfw_addr_fmt "0x%x" +#define kdb_elfw_addr_fmt0 "0x%016x" +#define kdb_f_count_fmt "%ld" + +#endif + +/* + * KDB_MAXBPT describes the total number of breakpoints + * supported by this architecure. + */ +#define KDB_MAXBPT 16 + +/* Maximum number of arguments to a function */ +#define KDB_MAXARGS 16 + +typedef enum { + KDB_REPEAT_NONE = 0, /* Do not repeat this command */ + KDB_REPEAT_NO_ARGS, /* Repeat the command without arguments */ + KDB_REPEAT_WITH_ARGS, /* Repeat the command including its arguments */ +} kdb_repeat_t; + +typedef int (*kdb_func_t)(int, const char **); + +/* Symbol table format returned by kallsyms. */ +typedef struct __ksymtab { + unsigned long value; /* Address of symbol */ + const char *mod_name; /* Module containing symbol or + * "kernel" */ + unsigned long mod_start; + unsigned long mod_end; + const char *sec_name; /* Section containing symbol */ + unsigned long sec_start; + unsigned long sec_end; + const char *sym_name; /* Full symbol name, including + * any version */ + unsigned long sym_start; + unsigned long sym_end; + } kdb_symtab_t; +extern int kallsyms_symbol_next(char *prefix_name, int flag); +extern int kallsyms_symbol_complete(char *prefix_name, int max_len); + +/* Exported Symbols for kernel loadable modules to use. */ +extern int kdb_register(char *, kdb_func_t, char *, char *, short); +extern int kdb_register_repeat(char *, kdb_func_t, char *, char *, + short, kdb_repeat_t); +extern int kdb_unregister(char *); + +extern int kdb_getarea_size(void *, unsigned long, size_t); +extern int kdb_putarea_size(unsigned long, void *, size_t); + +/* + * Like get_user and put_user, kdb_getarea and kdb_putarea take variable + * names, not pointers. The underlying *_size functions take pointers. + */ +#define kdb_getarea(x, addr) kdb_getarea_size(&(x), addr, sizeof((x))) +#define kdb_putarea(addr, x) kdb_putarea_size(addr, &(x), sizeof((x))) + +extern int kdb_getphysword(unsigned long *word, + unsigned long addr, size_t size); +extern int kdb_getword(unsigned long *, unsigned long, size_t); +extern int kdb_putword(unsigned long, unsigned long, size_t); + +extern int kdbgetularg(const char *, unsigned long *); +extern int kdb_set(int, const char **); +extern char *kdbgetenv(const char *); +extern int kdbgetintenv(const char *, int *); +extern int kdbgetaddrarg(int, const char **, int*, unsigned long *, + long *, char **); +extern int kdbgetsymval(const char *, kdb_symtab_t *); +extern int kdbnearsym(unsigned long, kdb_symtab_t *); +extern void kdbnearsym_cleanup(void); +extern char *kdb_strdup(const char *str, gfp_t type); +extern void kdb_symbol_print(unsigned long, const kdb_symtab_t *, unsigned int); + +/* Routine for debugging the debugger state. */ +extern void kdb_print_state(const char *, int); + +extern int kdb_state; +#define KDB_STATE_KDB 0x00000001 /* Cpu is inside kdb */ +#define KDB_STATE_LEAVING 0x00000002 /* Cpu is leaving kdb */ +#define KDB_STATE_CMD 0x00000004 /* Running a kdb command */ +#define KDB_STATE_KDB_CONTROL 0x00000008 /* This cpu is under + * kdb control */ +#define KDB_STATE_HOLD_CPU 0x00000010 /* Hold this cpu inside kdb */ +#define KDB_STATE_DOING_SS 0x00000020 /* Doing ss command */ +#define KDB_STATE_DOING_SSB 0x00000040 /* Doing ssb command, + * DOING_SS is also set */ +#define KDB_STATE_SSBPT 0x00000080 /* Install breakpoint + * after one ss, independent of + * DOING_SS */ +#define KDB_STATE_REENTRY 0x00000100 /* Valid re-entry into kdb */ +#define KDB_STATE_SUPPRESS 0x00000200 /* Suppress error messages */ +#define KDB_STATE_PAGER 0x00000400 /* pager is available */ +#define KDB_STATE_GO_SWITCH 0x00000800 /* go is switching + * back to initial cpu */ +#define KDB_STATE_PRINTF_LOCK 0x00001000 /* Holds kdb_printf lock */ +#define KDB_STATE_WAIT_IPI 0x00002000 /* Waiting for kdb_ipi() NMI */ +#define KDB_STATE_RECURSE 0x00004000 /* Recursive entry to kdb */ +#define KDB_STATE_IP_ADJUSTED 0x00008000 /* Restart IP has been + * adjusted */ +#define KDB_STATE_GO1 0x00010000 /* go only releases one cpu */ +#define KDB_STATE_KEYBOARD 0x00020000 /* kdb entered via + * keyboard on this cpu */ +#define KDB_STATE_KEXEC 0x00040000 /* kexec issued */ +#define KDB_STATE_DOING_KGDB 0x00080000 /* kgdb enter now issued */ +#define KDB_STATE_DOING_KGDB2 0x00100000 /* kgdb enter now issued */ +#define KDB_STATE_KGDB_TRANS 0x00200000 /* Transition to kgdb */ +#define KDB_STATE_ARCH 0xff000000 /* Reserved for arch + * specific use */ + +#define KDB_STATE(flag) (kdb_state & KDB_STATE_##flag) +#define KDB_STATE_SET(flag) ((void)(kdb_state |= KDB_STATE_##flag)) +#define KDB_STATE_CLEAR(flag) ((void)(kdb_state &= ~KDB_STATE_##flag)) + +extern int kdb_nextline; /* Current number of lines displayed */ + +typedef struct _kdb_bp { + unsigned long bp_addr; /* Address breakpoint is present at */ + unsigned int bp_free:1; /* This entry is available */ + unsigned int bp_enabled:1; /* Breakpoint is active in register */ + unsigned int bp_type:4; /* Uses hardware register */ + unsigned int bp_installed:1; /* Breakpoint is installed */ + unsigned int bp_delay:1; /* Do delayed bp handling */ + unsigned int bp_delayed:1; /* Delayed breakpoint */ + unsigned int bph_length; /* HW break length */ +} kdb_bp_t; + +#ifdef CONFIG_KGDB_KDB +extern kdb_bp_t kdb_breakpoints[/* KDB_MAXBPT */]; + +/* The KDB shell command table */ +typedef struct _kdbtab { + char *cmd_name; /* Command name */ + kdb_func_t cmd_func; /* Function to execute command */ + char *cmd_usage; /* Usage String for this command */ + char *cmd_help; /* Help message for this command */ + short cmd_flags; /* Parsing flags */ + short cmd_minlen; /* Minimum legal # command + * chars required */ + kdb_repeat_t cmd_repeat; /* Does command auto repeat on enter? */ +} kdbtab_t; + +extern int kdb_bt(int, const char **); /* KDB display back trace */ + +/* KDB breakpoint management functions */ +extern void kdb_initbptab(void); +extern void kdb_bp_install(struct pt_regs *); +extern void kdb_bp_remove(void); + +typedef enum { + KDB_DB_BPT, /* Breakpoint */ + KDB_DB_SS, /* Single-step trap */ + KDB_DB_SSB, /* Single step to branch */ + KDB_DB_SSBPT, /* Single step over breakpoint */ + KDB_DB_NOBPT /* Spurious breakpoint */ +} kdb_dbtrap_t; + +extern int kdb_main_loop(kdb_reason_t, kdb_reason_t, + int, kdb_dbtrap_t, struct pt_regs *); + +/* Miscellaneous functions and data areas */ +extern int kdb_grepping_flag; +extern char kdb_grep_string[]; +extern int kdb_grep_leading; +extern int kdb_grep_trailing; +extern char *kdb_cmds[]; +extern void kdb_syslog_data(char *syslog_data[]); +extern unsigned long kdb_task_state_string(const char *); +extern char kdb_task_state_char (const struct task_struct *); +extern unsigned long kdb_task_state(const struct task_struct *p, + unsigned long mask); +extern void kdb_ps_suppressed(void); +extern void kdb_ps1(const struct task_struct *p); +extern void kdb_print_nameval(const char *name, unsigned long val); +extern void kdb_send_sig_info(struct task_struct *p, struct siginfo *info); +extern void kdb_meminfo_proc_show(void); +extern const char *kdb_walk_kallsyms(loff_t *pos); +extern char *kdb_getstr(char *, size_t, char *); + +/* Defines for kdb_symbol_print */ +#define KDB_SP_SPACEB 0x0001 /* Space before string */ +#define KDB_SP_SPACEA 0x0002 /* Space after string */ +#define KDB_SP_PAREN 0x0004 /* Parenthesis around string */ +#define KDB_SP_VALUE 0x0008 /* Print the value of the address */ +#define KDB_SP_SYMSIZE 0x0010 /* Print the size of the symbol */ +#define KDB_SP_NEWLINE 0x0020 /* Newline after string */ +#define KDB_SP_DEFAULT (KDB_SP_VALUE|KDB_SP_PAREN) + +#define KDB_TSK(cpu) kgdb_info[cpu].task +#define KDB_TSKREGS(cpu) kgdb_info[cpu].debuggerinfo + +extern struct task_struct *kdb_curr_task(int); + +#define kdb_task_has_cpu(p) (task_curr(p)) + +/* Simplify coexistence with NPTL */ +#define kdb_do_each_thread(g, p) do_each_thread(g, p) +#define kdb_while_each_thread(g, p) while_each_thread(g, p) + +#define GFP_KDB (in_interrupt() ? GFP_ATOMIC : GFP_KERNEL) + +extern void *debug_kmalloc(size_t size, gfp_t flags); +extern void debug_kfree(void *); +extern void debug_kusage(void); + +extern void kdb_set_current_task(struct task_struct *); +extern struct task_struct *kdb_current_task; +#ifdef CONFIG_MODULES +extern struct list_head *kdb_modules; +#endif /* CONFIG_MODULES */ + +extern char kdb_prompt_str[]; + +#define KDB_WORD_SIZE ((int)sizeof(unsigned long)) + +#endif /* CONFIG_KGDB_KDB */ +#endif /* !_KDBPRIVATE_H */ diff --git a/kernel/debug/kdb/kdb_support.c b/kernel/debug/kdb/kdb_support.c new file mode 100644 index 00000000000..45344d5c53d --- /dev/null +++ b/kernel/debug/kdb/kdb_support.c @@ -0,0 +1,927 @@ +/* + * Kernel Debugger Architecture Independent Support Functions + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 1999-2004 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (c) 2009 Wind River Systems, Inc. All Rights Reserved. + * 03/02/13 added new 2.5 kallsyms <xavier.bru@bull.net> + */ + +#include <stdarg.h> +#include <linux/types.h> +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/kallsyms.h> +#include <linux/stddef.h> +#include <linux/vmalloc.h> +#include <linux/ptrace.h> +#include <linux/module.h> +#include <linux/highmem.h> +#include <linux/hardirq.h> +#include <linux/delay.h> +#include <linux/uaccess.h> +#include <linux/kdb.h> +#include <linux/slab.h> +#include "kdb_private.h" + +/* + * kdbgetsymval - Return the address of the given symbol. + * + * Parameters: + * symname Character string containing symbol name + * symtab Structure to receive results + * Returns: + * 0 Symbol not found, symtab zero filled + * 1 Symbol mapped to module/symbol/section, data in symtab + */ +int kdbgetsymval(const char *symname, kdb_symtab_t *symtab) +{ + if (KDB_DEBUG(AR)) + kdb_printf("kdbgetsymval: symname=%s, symtab=%p\n", symname, + symtab); + memset(symtab, 0, sizeof(*symtab)); + symtab->sym_start = kallsyms_lookup_name(symname); + if (symtab->sym_start) { + if (KDB_DEBUG(AR)) + kdb_printf("kdbgetsymval: returns 1, " + "symtab->sym_start=0x%lx\n", + symtab->sym_start); + return 1; + } + if (KDB_DEBUG(AR)) + kdb_printf("kdbgetsymval: returns 0\n"); + return 0; +} +EXPORT_SYMBOL(kdbgetsymval); + +static char *kdb_name_table[100]; /* arbitrary size */ + +/* + * kdbnearsym - Return the name of the symbol with the nearest address + * less than 'addr'. + * + * Parameters: + * addr Address to check for symbol near + * symtab Structure to receive results + * Returns: + * 0 No sections contain this address, symtab zero filled + * 1 Address mapped to module/symbol/section, data in symtab + * Remarks: + * 2.6 kallsyms has a "feature" where it unpacks the name into a + * string. If that string is reused before the caller expects it + * then the caller sees its string change without warning. To + * avoid cluttering up the main kdb code with lots of kdb_strdup, + * tests and kfree calls, kdbnearsym maintains an LRU list of the + * last few unique strings. The list is sized large enough to + * hold active strings, no kdb caller of kdbnearsym makes more + * than ~20 later calls before using a saved value. + */ +int kdbnearsym(unsigned long addr, kdb_symtab_t *symtab) +{ + int ret = 0; + unsigned long symbolsize; + unsigned long offset; +#define knt1_size 128 /* must be >= kallsyms table size */ + char *knt1 = NULL; + + if (KDB_DEBUG(AR)) + kdb_printf("kdbnearsym: addr=0x%lx, symtab=%p\n", addr, symtab); + memset(symtab, 0, sizeof(*symtab)); + + if (addr < 4096) + goto out; + knt1 = debug_kmalloc(knt1_size, GFP_ATOMIC); + if (!knt1) { + kdb_printf("kdbnearsym: addr=0x%lx cannot kmalloc knt1\n", + addr); + goto out; + } + symtab->sym_name = kallsyms_lookup(addr, &symbolsize , &offset, + (char **)(&symtab->mod_name), knt1); + if (offset > 8*1024*1024) { + symtab->sym_name = NULL; + addr = offset = symbolsize = 0; + } + symtab->sym_start = addr - offset; + symtab->sym_end = symtab->sym_start + symbolsize; + ret = symtab->sym_name != NULL && *(symtab->sym_name) != '\0'; + + if (ret) { + int i; + /* Another 2.6 kallsyms "feature". Sometimes the sym_name is + * set but the buffer passed into kallsyms_lookup is not used, + * so it contains garbage. The caller has to work out which + * buffer needs to be saved. + * + * What was Rusty smoking when he wrote that code? + */ + if (symtab->sym_name != knt1) { + strncpy(knt1, symtab->sym_name, knt1_size); + knt1[knt1_size-1] = '\0'; + } + for (i = 0; i < ARRAY_SIZE(kdb_name_table); ++i) { + if (kdb_name_table[i] && + strcmp(kdb_name_table[i], knt1) == 0) + break; + } + if (i >= ARRAY_SIZE(kdb_name_table)) { + debug_kfree(kdb_name_table[0]); + memcpy(kdb_name_table, kdb_name_table+1, + sizeof(kdb_name_table[0]) * + (ARRAY_SIZE(kdb_name_table)-1)); + } else { + debug_kfree(knt1); + knt1 = kdb_name_table[i]; + memcpy(kdb_name_table+i, kdb_name_table+i+1, + sizeof(kdb_name_table[0]) * + (ARRAY_SIZE(kdb_name_table)-i-1)); + } + i = ARRAY_SIZE(kdb_name_table) - 1; + kdb_name_table[i] = knt1; + symtab->sym_name = kdb_name_table[i]; + knt1 = NULL; + } + + if (symtab->mod_name == NULL) + symtab->mod_name = "kernel"; + if (KDB_DEBUG(AR)) + kdb_printf("kdbnearsym: returns %d symtab->sym_start=0x%lx, " + "symtab->mod_name=%p, symtab->sym_name=%p (%s)\n", ret, + symtab->sym_start, symtab->mod_name, symtab->sym_name, + symtab->sym_name); + +out: + debug_kfree(knt1); + return ret; +} + +void kdbnearsym_cleanup(void) +{ + int i; + for (i = 0; i < ARRAY_SIZE(kdb_name_table); ++i) { + if (kdb_name_table[i]) { + debug_kfree(kdb_name_table[i]); + kdb_name_table[i] = NULL; + } + } +} + +static char ks_namebuf[KSYM_NAME_LEN+1], ks_namebuf_prev[KSYM_NAME_LEN+1]; + +/* + * kallsyms_symbol_complete + * + * Parameters: + * prefix_name prefix of a symbol name to lookup + * max_len maximum length that can be returned + * Returns: + * Number of symbols which match the given prefix. + * Notes: + * prefix_name is changed to contain the longest unique prefix that + * starts with this prefix (tab completion). + */ +int kallsyms_symbol_complete(char *prefix_name, int max_len) +{ + loff_t pos = 0; + int prefix_len = strlen(prefix_name), prev_len = 0; + int i, number = 0; + const char *name; + + while ((name = kdb_walk_kallsyms(&pos))) { + if (strncmp(name, prefix_name, prefix_len) == 0) { + strcpy(ks_namebuf, name); + /* Work out the longest name that matches the prefix */ + if (++number == 1) { + prev_len = min_t(int, max_len-1, + strlen(ks_namebuf)); + memcpy(ks_namebuf_prev, ks_namebuf, prev_len); + ks_namebuf_prev[prev_len] = '\0'; + continue; + } + for (i = 0; i < prev_len; i++) { + if (ks_namebuf[i] != ks_namebuf_prev[i]) { + prev_len = i; + ks_namebuf_prev[i] = '\0'; + break; + } + } + } + } + if (prev_len > prefix_len) + memcpy(prefix_name, ks_namebuf_prev, prev_len+1); + return number; +} + +/* + * kallsyms_symbol_next + * + * Parameters: + * prefix_name prefix of a symbol name to lookup + * flag 0 means search from the head, 1 means continue search. + * Returns: + * 1 if a symbol matches the given prefix. + * 0 if no string found + */ +int kallsyms_symbol_next(char *prefix_name, int flag) +{ + int prefix_len = strlen(prefix_name); + static loff_t pos; + const char *name; + + if (!flag) + pos = 0; + + while ((name = kdb_walk_kallsyms(&pos))) { + if (strncmp(name, prefix_name, prefix_len) == 0) { + strncpy(prefix_name, name, strlen(name)+1); + return 1; + } + } + return 0; +} + +/* + * kdb_symbol_print - Standard method for printing a symbol name and offset. + * Inputs: + * addr Address to be printed. + * symtab Address of symbol data, if NULL this routine does its + * own lookup. + * punc Punctuation for string, bit field. + * Remarks: + * The string and its punctuation is only printed if the address + * is inside the kernel, except that the value is always printed + * when requested. + */ +void kdb_symbol_print(unsigned long addr, const kdb_symtab_t *symtab_p, + unsigned int punc) +{ + kdb_symtab_t symtab, *symtab_p2; + if (symtab_p) { + symtab_p2 = (kdb_symtab_t *)symtab_p; + } else { + symtab_p2 = &symtab; + kdbnearsym(addr, symtab_p2); + } + if (!(symtab_p2->sym_name || (punc & KDB_SP_VALUE))) + return; + if (punc & KDB_SP_SPACEB) + kdb_printf(" "); + if (punc & KDB_SP_VALUE) + kdb_printf(kdb_machreg_fmt0, addr); + if (symtab_p2->sym_name) { + if (punc & KDB_SP_VALUE) + kdb_printf(" "); + if (punc & KDB_SP_PAREN) + kdb_printf("("); + if (strcmp(symtab_p2->mod_name, "kernel")) + kdb_printf("[%s]", symtab_p2->mod_name); + kdb_printf("%s", symtab_p2->sym_name); + if (addr != symtab_p2->sym_start) + kdb_printf("+0x%lx", addr - symtab_p2->sym_start); + if (punc & KDB_SP_SYMSIZE) + kdb_printf("/0x%lx", + symtab_p2->sym_end - symtab_p2->sym_start); + if (punc & KDB_SP_PAREN) + kdb_printf(")"); + } + if (punc & KDB_SP_SPACEA) + kdb_printf(" "); + if (punc & KDB_SP_NEWLINE) + kdb_printf("\n"); +} + +/* + * kdb_strdup - kdb equivalent of strdup, for disasm code. + * Inputs: + * str The string to duplicate. + * type Flags to kmalloc for the new string. + * Returns: + * Address of the new string, NULL if storage could not be allocated. + * Remarks: + * This is not in lib/string.c because it uses kmalloc which is not + * available when string.o is used in boot loaders. + */ +char *kdb_strdup(const char *str, gfp_t type) +{ + int n = strlen(str)+1; + char *s = kmalloc(n, type); + if (!s) + return NULL; + return strcpy(s, str); +} + +/* + * kdb_getarea_size - Read an area of data. The kdb equivalent of + * copy_from_user, with kdb messages for invalid addresses. + * Inputs: + * res Pointer to the area to receive the result. + * addr Address of the area to copy. + * size Size of the area. + * Returns: + * 0 for success, < 0 for error. + */ +int kdb_getarea_size(void *res, unsigned long addr, size_t size) +{ + int ret = probe_kernel_read((char *)res, (char *)addr, size); + if (ret) { + if (!KDB_STATE(SUPPRESS)) { + kdb_printf("kdb_getarea: Bad address 0x%lx\n", addr); + KDB_STATE_SET(SUPPRESS); + } + ret = KDB_BADADDR; + } else { + KDB_STATE_CLEAR(SUPPRESS); + } + return ret; +} + +/* + * kdb_putarea_size - Write an area of data. The kdb equivalent of + * copy_to_user, with kdb messages for invalid addresses. + * Inputs: + * addr Address of the area to write to. + * res Pointer to the area holding the data. + * size Size of the area. + * Returns: + * 0 for success, < 0 for error. + */ +int kdb_putarea_size(unsigned long addr, void *res, size_t size) +{ + int ret = probe_kernel_read((char *)addr, (char *)res, size); + if (ret) { + if (!KDB_STATE(SUPPRESS)) { + kdb_printf("kdb_putarea: Bad address 0x%lx\n", addr); + KDB_STATE_SET(SUPPRESS); + } + ret = KDB_BADADDR; + } else { + KDB_STATE_CLEAR(SUPPRESS); + } + return ret; +} + +/* + * kdb_getphys - Read data from a physical address. Validate the + * address is in range, use kmap_atomic() to get data + * similar to kdb_getarea() - but for phys addresses + * Inputs: + * res Pointer to the word to receive the result + * addr Physical address of the area to copy + * size Size of the area + * Returns: + * 0 for success, < 0 for error. + */ +static int kdb_getphys(void *res, unsigned long addr, size_t size) +{ + unsigned long pfn; + void *vaddr; + struct page *page; + + pfn = (addr >> PAGE_SHIFT); + if (!pfn_valid(pfn)) + return 1; + page = pfn_to_page(pfn); + vaddr = kmap_atomic(page, KM_KDB); + memcpy(res, vaddr + (addr & (PAGE_SIZE - 1)), size); + kunmap_atomic(vaddr, KM_KDB); + + return 0; +} + +/* + * kdb_getphysword + * Inputs: + * word Pointer to the word to receive the result. + * addr Address of the area to copy. + * size Size of the area. + * Returns: + * 0 for success, < 0 for error. + */ +int kdb_getphysword(unsigned long *word, unsigned long addr, size_t size) +{ + int diag; + __u8 w1; + __u16 w2; + __u32 w4; + __u64 w8; + *word = 0; /* Default value if addr or size is invalid */ + + switch (size) { + case 1: + diag = kdb_getphys(&w1, addr, sizeof(w1)); + if (!diag) + *word = w1; + break; + case 2: + diag = kdb_getphys(&w2, addr, sizeof(w2)); + if (!diag) + *word = w2; + break; + case 4: + diag = kdb_getphys(&w4, addr, sizeof(w4)); + if (!diag) + *word = w4; + break; + case 8: + if (size <= sizeof(*word)) { + diag = kdb_getphys(&w8, addr, sizeof(w8)); + if (!diag) + *word = w8; + break; + } + /* drop through */ + default: + diag = KDB_BADWIDTH; + kdb_printf("kdb_getphysword: bad width %ld\n", (long) size); + } + return diag; +} + +/* + * kdb_getword - Read a binary value. Unlike kdb_getarea, this treats + * data as numbers. + * Inputs: + * word Pointer to the word to receive the result. + * addr Address of the area to copy. + * size Size of the area. + * Returns: + * 0 for success, < 0 for error. + */ +int kdb_getword(unsigned long *word, unsigned long addr, size_t size) +{ + int diag; + __u8 w1; + __u16 w2; + __u32 w4; + __u64 w8; + *word = 0; /* Default value if addr or size is invalid */ + switch (size) { + case 1: + diag = kdb_getarea(w1, addr); + if (!diag) + *word = w1; + break; + case 2: + diag = kdb_getarea(w2, addr); + if (!diag) + *word = w2; + break; + case 4: + diag = kdb_getarea(w4, addr); + if (!diag) + *word = w4; + break; + case 8: + if (size <= sizeof(*word)) { + diag = kdb_getarea(w8, addr); + if (!diag) + *word = w8; + break; + } + /* drop through */ + default: + diag = KDB_BADWIDTH; + kdb_printf("kdb_getword: bad width %ld\n", (long) size); + } + return diag; +} + +/* + * kdb_putword - Write a binary value. Unlike kdb_putarea, this + * treats data as numbers. + * Inputs: + * addr Address of the area to write to.. + * word The value to set. + * size Size of the area. + * Returns: + * 0 for success, < 0 for error. + */ +int kdb_putword(unsigned long addr, unsigned long word, size_t size) +{ + int diag; + __u8 w1; + __u16 w2; + __u32 w4; + __u64 w8; + switch (size) { + case 1: + w1 = word; + diag = kdb_putarea(addr, w1); + break; + case 2: + w2 = word; + diag = kdb_putarea(addr, w2); + break; + case 4: + w4 = word; + diag = kdb_putarea(addr, w4); + break; + case 8: + if (size <= sizeof(word)) { + w8 = word; + diag = kdb_putarea(addr, w8); + break; + } + /* drop through */ + default: + diag = KDB_BADWIDTH; + kdb_printf("kdb_putword: bad width %ld\n", (long) size); + } + return diag; +} + +/* + * kdb_task_state_string - Convert a string containing any of the + * letters DRSTCZEUIMA to a mask for the process state field and + * return the value. If no argument is supplied, return the mask + * that corresponds to environment variable PS, DRSTCZEU by + * default. + * Inputs: + * s String to convert + * Returns: + * Mask for process state. + * Notes: + * The mask folds data from several sources into a single long value, so + * be carefull not to overlap the bits. TASK_* bits are in the LSB, + * special cases like UNRUNNABLE are in the MSB. As of 2.6.10-rc1 there + * is no overlap between TASK_* and EXIT_* but that may not always be + * true, so EXIT_* bits are shifted left 16 bits before being stored in + * the mask. + */ + +/* unrunnable is < 0 */ +#define UNRUNNABLE (1UL << (8*sizeof(unsigned long) - 1)) +#define RUNNING (1UL << (8*sizeof(unsigned long) - 2)) +#define IDLE (1UL << (8*sizeof(unsigned long) - 3)) +#define DAEMON (1UL << (8*sizeof(unsigned long) - 4)) + +unsigned long kdb_task_state_string(const char *s) +{ + long res = 0; + if (!s) { + s = kdbgetenv("PS"); + if (!s) + s = "DRSTCZEU"; /* default value for ps */ + } + while (*s) { + switch (*s) { + case 'D': + res |= TASK_UNINTERRUPTIBLE; + break; + case 'R': + res |= RUNNING; + break; + case 'S': + res |= TASK_INTERRUPTIBLE; + break; + case 'T': + res |= TASK_STOPPED; + break; + case 'C': + res |= TASK_TRACED; + break; + case 'Z': + res |= EXIT_ZOMBIE << 16; + break; + case 'E': + res |= EXIT_DEAD << 16; + break; + case 'U': + res |= UNRUNNABLE; + break; + case 'I': + res |= IDLE; + break; + case 'M': + res |= DAEMON; + break; + case 'A': + res = ~0UL; + break; + default: + kdb_printf("%s: unknown flag '%c' ignored\n", + __func__, *s); + break; + } + ++s; + } + return res; +} + +/* + * kdb_task_state_char - Return the character that represents the task state. + * Inputs: + * p struct task for the process + * Returns: + * One character to represent the task state. + */ +char kdb_task_state_char (const struct task_struct *p) +{ + int cpu; + char state; + unsigned long tmp; + + if (!p || probe_kernel_read(&tmp, (char *)p, sizeof(unsigned long))) + return 'E'; + + cpu = kdb_process_cpu(p); + state = (p->state == 0) ? 'R' : + (p->state < 0) ? 'U' : + (p->state & TASK_UNINTERRUPTIBLE) ? 'D' : + (p->state & TASK_STOPPED) ? 'T' : + (p->state & TASK_TRACED) ? 'C' : + (p->exit_state & EXIT_ZOMBIE) ? 'Z' : + (p->exit_state & EXIT_DEAD) ? 'E' : + (p->state & TASK_INTERRUPTIBLE) ? 'S' : '?'; + if (p->pid == 0) { + /* Idle task. Is it really idle, apart from the kdb + * interrupt? */ + if (!kdb_task_has_cpu(p) || kgdb_info[cpu].irq_depth == 1) { + if (cpu != kdb_initial_cpu) + state = 'I'; /* idle task */ + } + } else if (!p->mm && state == 'S') { + state = 'M'; /* sleeping system daemon */ + } + return state; +} + +/* + * kdb_task_state - Return true if a process has the desired state + * given by the mask. + * Inputs: + * p struct task for the process + * mask mask from kdb_task_state_string to select processes + * Returns: + * True if the process matches at least one criteria defined by the mask. + */ +unsigned long kdb_task_state(const struct task_struct *p, unsigned long mask) +{ + char state[] = { kdb_task_state_char(p), '\0' }; + return (mask & kdb_task_state_string(state)) != 0; +} + +/* + * kdb_print_nameval - Print a name and its value, converting the + * value to a symbol lookup if possible. + * Inputs: + * name field name to print + * val value of field + */ +void kdb_print_nameval(const char *name, unsigned long val) +{ + kdb_symtab_t symtab; + kdb_printf(" %-11.11s ", name); + if (kdbnearsym(val, &symtab)) + kdb_symbol_print(val, &symtab, + KDB_SP_VALUE|KDB_SP_SYMSIZE|KDB_SP_NEWLINE); + else + kdb_printf("0x%lx\n", val); +} + +/* Last ditch allocator for debugging, so we can still debug even when + * the GFP_ATOMIC pool has been exhausted. The algorithms are tuned + * for space usage, not for speed. One smallish memory pool, the free + * chain is always in ascending address order to allow coalescing, + * allocations are done in brute force best fit. + */ + +struct debug_alloc_header { + u32 next; /* offset of next header from start of pool */ + u32 size; + void *caller; +}; + +/* The memory returned by this allocator must be aligned, which means + * so must the header size. Do not assume that sizeof(struct + * debug_alloc_header) is a multiple of the alignment, explicitly + * calculate the overhead of this header, including the alignment. + * The rest of this code must not use sizeof() on any header or + * pointer to a header. + */ +#define dah_align 8 +#define dah_overhead ALIGN(sizeof(struct debug_alloc_header), dah_align) + +static u64 debug_alloc_pool_aligned[256*1024/dah_align]; /* 256K pool */ +static char *debug_alloc_pool = (char *)debug_alloc_pool_aligned; +static u32 dah_first, dah_first_call = 1, dah_used, dah_used_max; + +/* Locking is awkward. The debug code is called from all contexts, + * including non maskable interrupts. A normal spinlock is not safe + * in NMI context. Try to get the debug allocator lock, if it cannot + * be obtained after a second then give up. If the lock could not be + * previously obtained on this cpu then only try once. + * + * sparse has no annotation for "this function _sometimes_ acquires a + * lock", so fudge the acquire/release notation. + */ +static DEFINE_SPINLOCK(dap_lock); +static int get_dap_lock(void) + __acquires(dap_lock) +{ + static int dap_locked = -1; + int count; + if (dap_locked == smp_processor_id()) + count = 1; + else + count = 1000; + while (1) { + if (spin_trylock(&dap_lock)) { + dap_locked = -1; + return 1; + } + if (!count--) + break; + udelay(1000); + } + dap_locked = smp_processor_id(); + __acquire(dap_lock); + return 0; +} + +void *debug_kmalloc(size_t size, gfp_t flags) +{ + unsigned int rem, h_offset; + struct debug_alloc_header *best, *bestprev, *prev, *h; + void *p = NULL; + if (!get_dap_lock()) { + __release(dap_lock); /* we never actually got it */ + return NULL; + } + h = (struct debug_alloc_header *)(debug_alloc_pool + dah_first); + if (dah_first_call) { + h->size = sizeof(debug_alloc_pool_aligned) - dah_overhead; + dah_first_call = 0; + } + size = ALIGN(size, dah_align); + prev = best = bestprev = NULL; + while (1) { + if (h->size >= size && (!best || h->size < best->size)) { + best = h; + bestprev = prev; + if (h->size == size) + break; + } + if (!h->next) + break; + prev = h; + h = (struct debug_alloc_header *)(debug_alloc_pool + h->next); + } + if (!best) + goto out; + rem = best->size - size; + /* The pool must always contain at least one header */ + if (best->next == 0 && bestprev == NULL && rem < dah_overhead) + goto out; + if (rem >= dah_overhead) { + best->size = size; + h_offset = ((char *)best - debug_alloc_pool) + + dah_overhead + best->size; + h = (struct debug_alloc_header *)(debug_alloc_pool + h_offset); + h->size = rem - dah_overhead; + h->next = best->next; + } else + h_offset = best->next; + best->caller = __builtin_return_address(0); + dah_used += best->size; + dah_used_max = max(dah_used, dah_used_max); + if (bestprev) + bestprev->next = h_offset; + else + dah_first = h_offset; + p = (char *)best + dah_overhead; + memset(p, POISON_INUSE, best->size - 1); + *((char *)p + best->size - 1) = POISON_END; +out: + spin_unlock(&dap_lock); + return p; +} + +void debug_kfree(void *p) +{ + struct debug_alloc_header *h; + unsigned int h_offset; + if (!p) + return; + if ((char *)p < debug_alloc_pool || + (char *)p >= debug_alloc_pool + sizeof(debug_alloc_pool_aligned)) { + kfree(p); + return; + } + if (!get_dap_lock()) { + __release(dap_lock); /* we never actually got it */ + return; /* memory leak, cannot be helped */ + } + h = (struct debug_alloc_header *)((char *)p - dah_overhead); + memset(p, POISON_FREE, h->size - 1); + *((char *)p + h->size - 1) = POISON_END; + h->caller = NULL; + dah_used -= h->size; + h_offset = (char *)h - debug_alloc_pool; + if (h_offset < dah_first) { + h->next = dah_first; + dah_first = h_offset; + } else { + struct debug_alloc_header *prev; + unsigned int prev_offset; + prev = (struct debug_alloc_header *)(debug_alloc_pool + + dah_first); + while (1) { + if (!prev->next || prev->next > h_offset) + break; + prev = (struct debug_alloc_header *) + (debug_alloc_pool + prev->next); + } + prev_offset = (char *)prev - debug_alloc_pool; + if (prev_offset + dah_overhead + prev->size == h_offset) { + prev->size += dah_overhead + h->size; + memset(h, POISON_FREE, dah_overhead - 1); + *((char *)h + dah_overhead - 1) = POISON_END; + h = prev; + h_offset = prev_offset; + } else { + h->next = prev->next; + prev->next = h_offset; + } + } + if (h_offset + dah_overhead + h->size == h->next) { + struct debug_alloc_header *next; + next = (struct debug_alloc_header *) + (debug_alloc_pool + h->next); + h->size += dah_overhead + next->size; + h->next = next->next; + memset(next, POISON_FREE, dah_overhead - 1); + *((char *)next + dah_overhead - 1) = POISON_END; + } + spin_unlock(&dap_lock); +} + +void debug_kusage(void) +{ + struct debug_alloc_header *h_free, *h_used; +#ifdef CONFIG_IA64 + /* FIXME: using dah for ia64 unwind always results in a memory leak. + * Fix that memory leak first, then set debug_kusage_one_time = 1 for + * all architectures. + */ + static int debug_kusage_one_time; +#else + static int debug_kusage_one_time = 1; +#endif + if (!get_dap_lock()) { + __release(dap_lock); /* we never actually got it */ + return; + } + h_free = (struct debug_alloc_header *)(debug_alloc_pool + dah_first); + if (dah_first == 0 && + (h_free->size == sizeof(debug_alloc_pool_aligned) - dah_overhead || + dah_first_call)) + goto out; + if (!debug_kusage_one_time) + goto out; + debug_kusage_one_time = 0; + kdb_printf("%s: debug_kmalloc memory leak dah_first %d\n", + __func__, dah_first); + if (dah_first) { + h_used = (struct debug_alloc_header *)debug_alloc_pool; + kdb_printf("%s: h_used %p size %d\n", __func__, h_used, + h_used->size); + } + do { + h_used = (struct debug_alloc_header *) + ((char *)h_free + dah_overhead + h_free->size); + kdb_printf("%s: h_used %p size %d caller %p\n", + __func__, h_used, h_used->size, h_used->caller); + h_free = (struct debug_alloc_header *) + (debug_alloc_pool + h_free->next); + } while (h_free->next); + h_used = (struct debug_alloc_header *) + ((char *)h_free + dah_overhead + h_free->size); + if ((char *)h_used - debug_alloc_pool != + sizeof(debug_alloc_pool_aligned)) + kdb_printf("%s: h_used %p size %d caller %p\n", + __func__, h_used, h_used->size, h_used->caller); +out: + spin_unlock(&dap_lock); +} + +/* Maintain a small stack of kdb_flags to allow recursion without disturbing + * the global kdb state. + */ + +static int kdb_flags_stack[4], kdb_flags_index; + +void kdb_save_flags(void) +{ + BUG_ON(kdb_flags_index >= ARRAY_SIZE(kdb_flags_stack)); + kdb_flags_stack[kdb_flags_index++] = kdb_flags; +} + +void kdb_restore_flags(void) +{ + BUG_ON(kdb_flags_index <= 0); + kdb_flags = kdb_flags_stack[--kdb_flags_index]; +} diff --git a/kernel/exit.c b/kernel/exit.c index eabca5a73a8..ceffc67b564 100644 --- a/kernel/exit.c +++ b/kernel/exit.c @@ -58,11 +58,11 @@ static void exit_mm(struct task_struct * tsk); -static void __unhash_process(struct task_struct *p) +static void __unhash_process(struct task_struct *p, bool group_dead) { nr_threads--; detach_pid(p, PIDTYPE_PID); - if (thread_group_leader(p)) { + if (group_dead) { detach_pid(p, PIDTYPE_PGID); detach_pid(p, PIDTYPE_SID); @@ -79,10 +79,9 @@ static void __unhash_process(struct task_struct *p) static void __exit_signal(struct task_struct *tsk) { struct signal_struct *sig = tsk->signal; + bool group_dead = thread_group_leader(tsk); struct sighand_struct *sighand; - - BUG_ON(!sig); - BUG_ON(!atomic_read(&sig->count)); + struct tty_struct *uninitialized_var(tty); sighand = rcu_dereference_check(tsk->sighand, rcu_read_lock_held() || @@ -90,14 +89,16 @@ static void __exit_signal(struct task_struct *tsk) spin_lock(&sighand->siglock); posix_cpu_timers_exit(tsk); - if (atomic_dec_and_test(&sig->count)) + if (group_dead) { posix_cpu_timers_exit_group(tsk); - else { + tty = sig->tty; + sig->tty = NULL; + } else { /* * If there is any task waiting for the group exit * then notify it: */ - if (sig->group_exit_task && atomic_read(&sig->count) == sig->notify_count) + if (sig->notify_count > 0 && !--sig->notify_count) wake_up_process(sig->group_exit_task); if (tsk == sig->curr_target) @@ -123,32 +124,24 @@ static void __exit_signal(struct task_struct *tsk) sig->oublock += task_io_get_oublock(tsk); task_io_accounting_add(&sig->ioac, &tsk->ioac); sig->sum_sched_runtime += tsk->se.sum_exec_runtime; - sig = NULL; /* Marker for below. */ } - __unhash_process(tsk); + sig->nr_threads--; + __unhash_process(tsk, group_dead); /* * Do this under ->siglock, we can race with another thread * doing sigqueue_free() if we have SIGQUEUE_PREALLOC signals. */ flush_sigqueue(&tsk->pending); - - tsk->signal = NULL; tsk->sighand = NULL; spin_unlock(&sighand->siglock); __cleanup_sighand(sighand); clear_tsk_thread_flag(tsk,TIF_SIGPENDING); - if (sig) { + if (group_dead) { flush_sigqueue(&sig->shared_pending); - taskstats_tgid_free(sig); - /* - * Make sure ->signal can't go away under rq->lock, - * see account_group_exec_runtime(). - */ - task_rq_unlock_wait(tsk); - __cleanup_signal(sig); + tty_kref_put(tty); } } @@ -856,12 +849,9 @@ static void exit_notify(struct task_struct *tsk, int group_dead) tsk->exit_state = signal == DEATH_REAP ? EXIT_DEAD : EXIT_ZOMBIE; - /* mt-exec, de_thread() is waiting for us */ - if (thread_group_leader(tsk) && - tsk->signal->group_exit_task && - tsk->signal->notify_count < 0) + /* mt-exec, de_thread() is waiting for group leader */ + if (unlikely(tsk->signal->notify_count < 0)) wake_up_process(tsk->signal->group_exit_task); - write_unlock_irq(&tasklist_lock); tracehook_report_death(tsk, signal, cookie, group_dead); @@ -1002,8 +992,10 @@ NORET_TYPE void do_exit(long code) exit_notify(tsk, group_dead); #ifdef CONFIG_NUMA + task_lock(tsk); mpol_put(tsk->mempolicy); tsk->mempolicy = NULL; + task_unlock(tsk); #endif #ifdef CONFIG_FUTEX if (unlikely(current->pi_state_cache)) diff --git a/kernel/fork.c b/kernel/fork.c index 4d57d9e3a6e..bf9fef6d1bf 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -165,6 +165,18 @@ void free_task(struct task_struct *tsk) } EXPORT_SYMBOL(free_task); +static inline void free_signal_struct(struct signal_struct *sig) +{ + taskstats_tgid_free(sig); + kmem_cache_free(signal_cachep, sig); +} + +static inline void put_signal_struct(struct signal_struct *sig) +{ + if (atomic_dec_and_test(&sig->sigcnt)) + free_signal_struct(sig); +} + void __put_task_struct(struct task_struct *tsk) { WARN_ON(!tsk->exit_state); @@ -173,6 +185,7 @@ void __put_task_struct(struct task_struct *tsk) exit_creds(tsk); delayacct_tsk_free(tsk); + put_signal_struct(tsk->signal); if (!profile_handoff_task(tsk)) free_task(tsk); @@ -864,8 +877,9 @@ static int copy_signal(unsigned long clone_flags, struct task_struct *tsk) if (!sig) return -ENOMEM; - atomic_set(&sig->count, 1); + sig->nr_threads = 1; atomic_set(&sig->live, 1); + atomic_set(&sig->sigcnt, 1); init_waitqueue_head(&sig->wait_chldexit); if (clone_flags & CLONE_NEWPID) sig->flags |= SIGNAL_UNKILLABLE; @@ -889,13 +903,6 @@ static int copy_signal(unsigned long clone_flags, struct task_struct *tsk) return 0; } -void __cleanup_signal(struct signal_struct *sig) -{ - thread_group_cputime_free(sig); - tty_kref_put(sig->tty); - kmem_cache_free(signal_cachep, sig); -} - static void copy_flags(unsigned long clone_flags, struct task_struct *p) { unsigned long new_flags = p->flags; @@ -1079,6 +1086,10 @@ static struct task_struct *copy_process(unsigned long clone_flags, } mpol_fix_fork_child_flag(p); #endif +#ifdef CONFIG_CPUSETS + p->cpuset_mem_spread_rotor = node_random(p->mems_allowed); + p->cpuset_slab_spread_rotor = node_random(p->mems_allowed); +#endif #ifdef CONFIG_TRACE_IRQFLAGS p->irq_events = 0; #ifdef __ARCH_WANT_INTERRUPTS_ON_CTXSW @@ -1245,8 +1256,9 @@ static struct task_struct *copy_process(unsigned long clone_flags, } if (clone_flags & CLONE_THREAD) { - atomic_inc(¤t->signal->count); + current->signal->nr_threads++; atomic_inc(¤t->signal->live); + atomic_inc(¤t->signal->sigcnt); p->group_leader = current->group_leader; list_add_tail_rcu(&p->thread_group, &p->group_leader->thread_group); } @@ -1259,7 +1271,6 @@ static struct task_struct *copy_process(unsigned long clone_flags, p->nsproxy->pid_ns->child_reaper = p; p->signal->leader_pid = pid; - tty_kref_put(p->signal->tty); p->signal->tty = tty_kref_get(current->signal->tty); attach_pid(p, PIDTYPE_PGID, task_pgrp(current)); attach_pid(p, PIDTYPE_SID, task_session(current)); @@ -1292,7 +1303,7 @@ bad_fork_cleanup_mm: mmput(p->mm); bad_fork_cleanup_signal: if (!(clone_flags & CLONE_THREAD)) - __cleanup_signal(p->signal); + free_signal_struct(p->signal); bad_fork_cleanup_sighand: __cleanup_sighand(p->sighand); bad_fork_cleanup_fs: @@ -1327,6 +1338,16 @@ noinline struct pt_regs * __cpuinit __attribute__((weak)) idle_regs(struct pt_re return regs; } +static inline void init_idle_pids(struct pid_link *links) +{ + enum pid_type type; + + for (type = PIDTYPE_PID; type < PIDTYPE_MAX; ++type) { + INIT_HLIST_NODE(&links[type].node); /* not really needed */ + links[type].pid = &init_struct_pid; + } +} + struct task_struct * __cpuinit fork_idle(int cpu) { struct task_struct *task; @@ -1334,8 +1355,10 @@ struct task_struct * __cpuinit fork_idle(int cpu) task = copy_process(CLONE_VM, 0, idle_regs(®s), 0, NULL, &init_struct_pid, 0); - if (!IS_ERR(task)) + if (!IS_ERR(task)) { + init_idle_pids(task->pids); init_idle(task, cpu); + } return task; } @@ -1507,14 +1530,6 @@ static void check_unshare_flags(unsigned long *flags_ptr) *flags_ptr |= CLONE_SIGHAND; /* - * If unsharing signal handlers and the task was created - * using CLONE_THREAD, then must unshare the thread - */ - if ((*flags_ptr & CLONE_SIGHAND) && - (atomic_read(¤t->signal->count) > 1)) - *flags_ptr |= CLONE_THREAD; - - /* * If unsharing namespace, must also unshare filesystem information. */ if (*flags_ptr & CLONE_NEWNS) diff --git a/kernel/groups.c b/kernel/groups.c index 2b45b2ee396..53b1916c949 100644 --- a/kernel/groups.c +++ b/kernel/groups.c @@ -164,12 +164,6 @@ int groups_search(const struct group_info *group_info, gid_t grp) */ int set_groups(struct cred *new, struct group_info *group_info) { - int retval; - - retval = security_task_setgroups(group_info); - if (retval) - return retval; - put_group_info(new->group_info); groups_sort(group_info); get_group_info(group_info); diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c index 0086628b6e9..b9b134b3508 100644 --- a/kernel/hrtimer.c +++ b/kernel/hrtimer.c @@ -1749,35 +1749,15 @@ void __init hrtimers_init(void) } /** - * schedule_hrtimeout_range - sleep until timeout + * schedule_hrtimeout_range_clock - sleep until timeout * @expires: timeout value (ktime_t) * @delta: slack in expires timeout (ktime_t) * @mode: timer mode, HRTIMER_MODE_ABS or HRTIMER_MODE_REL - * - * Make the current task sleep until the given expiry time has - * elapsed. The routine will return immediately unless - * the current task state has been set (see set_current_state()). - * - * The @delta argument gives the kernel the freedom to schedule the - * actual wakeup to a time that is both power and performance friendly. - * The kernel give the normal best effort behavior for "@expires+@delta", - * but may decide to fire the timer earlier, but no earlier than @expires. - * - * You can set the task state as follows - - * - * %TASK_UNINTERRUPTIBLE - at least @timeout time is guaranteed to - * pass before the routine returns. - * - * %TASK_INTERRUPTIBLE - the routine may return early if a signal is - * delivered to the current task. - * - * The current task state is guaranteed to be TASK_RUNNING when this - * routine returns. - * - * Returns 0 when the timer has expired otherwise -EINTR + * @clock: timer clock, CLOCK_MONOTONIC or CLOCK_REALTIME */ -int __sched schedule_hrtimeout_range(ktime_t *expires, unsigned long delta, - const enum hrtimer_mode mode) +int __sched +schedule_hrtimeout_range_clock(ktime_t *expires, unsigned long delta, + const enum hrtimer_mode mode, int clock) { struct hrtimer_sleeper t; @@ -1799,7 +1779,7 @@ int __sched schedule_hrtimeout_range(ktime_t *expires, unsigned long delta, return -EINTR; } - hrtimer_init_on_stack(&t.timer, CLOCK_MONOTONIC, mode); + hrtimer_init_on_stack(&t.timer, clock, mode); hrtimer_set_expires_range_ns(&t.timer, *expires, delta); hrtimer_init_sleeper(&t, current); @@ -1818,6 +1798,41 @@ int __sched schedule_hrtimeout_range(ktime_t *expires, unsigned long delta, return !t.task ? 0 : -EINTR; } + +/** + * schedule_hrtimeout_range - sleep until timeout + * @expires: timeout value (ktime_t) + * @delta: slack in expires timeout (ktime_t) + * @mode: timer mode, HRTIMER_MODE_ABS or HRTIMER_MODE_REL + * + * Make the current task sleep until the given expiry time has + * elapsed. The routine will return immediately unless + * the current task state has been set (see set_current_state()). + * + * The @delta argument gives the kernel the freedom to schedule the + * actual wakeup to a time that is both power and performance friendly. + * The kernel give the normal best effort behavior for "@expires+@delta", + * but may decide to fire the timer earlier, but no earlier than @expires. + * + * You can set the task state as follows - + * + * %TASK_UNINTERRUPTIBLE - at least @timeout time is guaranteed to + * pass before the routine returns. + * + * %TASK_INTERRUPTIBLE - the routine may return early if a signal is + * delivered to the current task. + * + * The current task state is guaranteed to be TASK_RUNNING when this + * routine returns. + * + * Returns 0 when the timer has expired otherwise -EINTR + */ +int __sched schedule_hrtimeout_range(ktime_t *expires, unsigned long delta, + const enum hrtimer_mode mode) +{ + return schedule_hrtimeout_range_clock(expires, delta, mode, + CLOCK_MONOTONIC); +} EXPORT_SYMBOL_GPL(schedule_hrtimeout_range); /** diff --git a/kernel/irq/handle.c b/kernel/irq/handle.c index 76d5a671bfe..27e5c691122 100644 --- a/kernel/irq/handle.c +++ b/kernel/irq/handle.c @@ -370,9 +370,6 @@ irqreturn_t handle_IRQ_event(unsigned int irq, struct irqaction *action) irqreturn_t ret, retval = IRQ_NONE; unsigned int status = 0; - if (!(action->flags & IRQF_DISABLED)) - local_irq_enable_in_hardirq(); - do { trace_irq_handler_entry(irq, action); ret = action->handler(irq, action->dev_id); diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c index 704e488730a..3164ba7ce15 100644 --- a/kernel/irq/manage.c +++ b/kernel/irq/manage.c @@ -138,6 +138,22 @@ int irq_set_affinity(unsigned int irq, const struct cpumask *cpumask) return 0; } +int irq_set_affinity_hint(unsigned int irq, const struct cpumask *m) +{ + struct irq_desc *desc = irq_to_desc(irq); + unsigned long flags; + + if (!desc) + return -EINVAL; + + raw_spin_lock_irqsave(&desc->lock, flags); + desc->affinity_hint = m; + raw_spin_unlock_irqrestore(&desc->lock, flags); + + return 0; +} +EXPORT_SYMBOL_GPL(irq_set_affinity_hint); + #ifndef CONFIG_AUTO_IRQ_AFFINITY /* * Generic version of the affinity autoselector. @@ -757,16 +773,6 @@ __setup_irq(unsigned int irq, struct irq_desc *desc, struct irqaction *new) if (new->flags & IRQF_ONESHOT) desc->status |= IRQ_ONESHOT; - /* - * Force MSI interrupts to run with interrupts - * disabled. The multi vector cards can cause stack - * overflows due to nested interrupts when enough of - * them are directed to a core and fire at the same - * time. - */ - if (desc->msi_desc) - new->flags |= IRQF_DISABLED; - if (!(desc->status & IRQ_NOAUTOEN)) { desc->depth = 0; desc->status &= ~IRQ_DISABLED; @@ -916,6 +922,12 @@ static struct irqaction *__free_irq(unsigned int irq, void *dev_id) desc->chip->disable(irq); } +#ifdef CONFIG_SMP + /* make sure affinity_hint is cleaned up */ + if (WARN_ON_ONCE(desc->affinity_hint)) + desc->affinity_hint = NULL; +#endif + raw_spin_unlock_irqrestore(&desc->lock, flags); unregister_handler_proc(irq, action); @@ -1027,7 +1039,6 @@ EXPORT_SYMBOL(free_irq); * Flags: * * IRQF_SHARED Interrupt is shared - * IRQF_DISABLED Disable local interrupts while processing * IRQF_SAMPLE_RANDOM The interrupt can be used for entropy * IRQF_TRIGGER_* Specify active edge(s) or level * @@ -1041,25 +1052,6 @@ int request_threaded_irq(unsigned int irq, irq_handler_t handler, int retval; /* - * handle_IRQ_event() always ignores IRQF_DISABLED except for - * the _first_ irqaction (sigh). That can cause oopsing, but - * the behavior is classified as "will not fix" so we need to - * start nudging drivers away from using that idiom. - */ - if ((irqflags & (IRQF_SHARED|IRQF_DISABLED)) == - (IRQF_SHARED|IRQF_DISABLED)) { - pr_warning( - "IRQ %d/%s: IRQF_DISABLED is not guaranteed on shared IRQs\n", - irq, devname); - } - -#ifdef CONFIG_LOCKDEP - /* - * Lockdep wants atomic interrupt handlers: - */ - irqflags |= IRQF_DISABLED; -#endif - /* * Sanity-check: shared interrupts must pass in a real dev-ID, * otherwise we'll have trouble later trying to figure out * which interrupt is which (messes up the interrupt freeing @@ -1120,3 +1112,40 @@ int request_threaded_irq(unsigned int irq, irq_handler_t handler, return retval; } EXPORT_SYMBOL(request_threaded_irq); + +/** + * request_any_context_irq - allocate an interrupt line + * @irq: Interrupt line to allocate + * @handler: Function to be called when the IRQ occurs. + * Threaded handler for threaded interrupts. + * @flags: Interrupt type flags + * @name: An ascii name for the claiming device + * @dev_id: A cookie passed back to the handler function + * + * This call allocates interrupt resources and enables the + * interrupt line and IRQ handling. It selects either a + * hardirq or threaded handling method depending on the + * context. + * + * On failure, it returns a negative value. On success, + * it returns either IRQC_IS_HARDIRQ or IRQC_IS_NESTED. + */ +int request_any_context_irq(unsigned int irq, irq_handler_t handler, + unsigned long flags, const char *name, void *dev_id) +{ + struct irq_desc *desc = irq_to_desc(irq); + int ret; + + if (!desc) + return -EINVAL; + + if (desc->status & IRQ_NESTED_THREAD) { + ret = request_threaded_irq(irq, NULL, handler, + flags, name, dev_id); + return !ret ? IRQC_IS_NESTED : ret; + } + + ret = request_irq(irq, handler, flags, name, dev_id); + return !ret ? IRQC_IS_HARDIRQ : ret; +} +EXPORT_SYMBOL_GPL(request_any_context_irq); diff --git a/kernel/irq/proc.c b/kernel/irq/proc.c index 7a6eb04ef6b..09a2ee540bd 100644 --- a/kernel/irq/proc.c +++ b/kernel/irq/proc.c @@ -32,6 +32,27 @@ static int irq_affinity_proc_show(struct seq_file *m, void *v) return 0; } +static int irq_affinity_hint_proc_show(struct seq_file *m, void *v) +{ + struct irq_desc *desc = irq_to_desc((long)m->private); + unsigned long flags; + cpumask_var_t mask; + + if (!zalloc_cpumask_var(&mask, GFP_KERNEL)) + return -ENOMEM; + + raw_spin_lock_irqsave(&desc->lock, flags); + if (desc->affinity_hint) + cpumask_copy(mask, desc->affinity_hint); + raw_spin_unlock_irqrestore(&desc->lock, flags); + + seq_cpumask(m, mask); + seq_putc(m, '\n'); + free_cpumask_var(mask); + + return 0; +} + #ifndef is_affinity_mask_valid #define is_affinity_mask_valid(val) 1 #endif @@ -84,6 +105,11 @@ static int irq_affinity_proc_open(struct inode *inode, struct file *file) return single_open(file, irq_affinity_proc_show, PDE(inode)->data); } +static int irq_affinity_hint_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, irq_affinity_hint_proc_show, PDE(inode)->data); +} + static const struct file_operations irq_affinity_proc_fops = { .open = irq_affinity_proc_open, .read = seq_read, @@ -92,6 +118,13 @@ static const struct file_operations irq_affinity_proc_fops = { .write = irq_affinity_proc_write, }; +static const struct file_operations irq_affinity_hint_proc_fops = { + .open = irq_affinity_hint_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + static int default_affinity_show(struct seq_file *m, void *v) { seq_cpumask(m, irq_default_affinity); @@ -147,6 +180,26 @@ static const struct file_operations default_affinity_proc_fops = { .release = single_release, .write = default_affinity_write, }; + +static int irq_node_proc_show(struct seq_file *m, void *v) +{ + struct irq_desc *desc = irq_to_desc((long) m->private); + + seq_printf(m, "%d\n", desc->node); + return 0; +} + +static int irq_node_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, irq_node_proc_show, PDE(inode)->data); +} + +static const struct file_operations irq_node_proc_fops = { + .open = irq_node_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; #endif static int irq_spurious_proc_show(struct seq_file *m, void *v) @@ -231,6 +284,13 @@ void register_irq_proc(unsigned int irq, struct irq_desc *desc) /* create /proc/irq/<irq>/smp_affinity */ proc_create_data("smp_affinity", 0600, desc->dir, &irq_affinity_proc_fops, (void *)(long)irq); + + /* create /proc/irq/<irq>/affinity_hint */ + proc_create_data("affinity_hint", 0400, desc->dir, + &irq_affinity_hint_proc_fops, (void *)(long)irq); + + proc_create_data("node", 0444, desc->dir, + &irq_node_proc_fops, (void *)(long)irq); #endif proc_create_data("spurious", 0444, desc->dir, diff --git a/kernel/kallsyms.c b/kernel/kallsyms.c index 13aff293f4d..6f6d091b575 100644 --- a/kernel/kallsyms.c +++ b/kernel/kallsyms.c @@ -16,6 +16,7 @@ #include <linux/init.h> #include <linux/seq_file.h> #include <linux/fs.h> +#include <linux/kdb.h> #include <linux/err.h> #include <linux/proc_fs.h> #include <linux/sched.h> /* for cond_resched */ @@ -516,6 +517,26 @@ static int kallsyms_open(struct inode *inode, struct file *file) return ret; } +#ifdef CONFIG_KGDB_KDB +const char *kdb_walk_kallsyms(loff_t *pos) +{ + static struct kallsym_iter kdb_walk_kallsyms_iter; + if (*pos == 0) { + memset(&kdb_walk_kallsyms_iter, 0, + sizeof(kdb_walk_kallsyms_iter)); + reset_iter(&kdb_walk_kallsyms_iter, 0); + } + while (1) { + if (!update_iter(&kdb_walk_kallsyms_iter, *pos)) + return NULL; + ++*pos; + /* Some debugging symbols have no name. Ignore them. */ + if (kdb_walk_kallsyms_iter.name[0]) + return kdb_walk_kallsyms_iter.name; + } +} +#endif /* CONFIG_KGDB_KDB */ + static const struct file_operations kallsyms_operations = { .open = kallsyms_open, .read = seq_read, diff --git a/kernel/kgdb.c b/kernel/kgdb.c deleted file mode 100644 index 11f3515ca83..00000000000 --- a/kernel/kgdb.c +++ /dev/null @@ -1,1764 +0,0 @@ -/* - * KGDB stub. - * - * Maintainer: Jason Wessel <jason.wessel@windriver.com> - * - * Copyright (C) 2000-2001 VERITAS Software Corporation. - * Copyright (C) 2002-2004 Timesys Corporation - * Copyright (C) 2003-2004 Amit S. Kale <amitkale@linsyssoft.com> - * Copyright (C) 2004 Pavel Machek <pavel@suse.cz> - * Copyright (C) 2004-2006 Tom Rini <trini@kernel.crashing.org> - * Copyright (C) 2004-2006 LinSysSoft Technologies Pvt. Ltd. - * Copyright (C) 2005-2008 Wind River Systems, Inc. - * Copyright (C) 2007 MontaVista Software, Inc. - * Copyright (C) 2008 Red Hat, Inc., Ingo Molnar <mingo@redhat.com> - * - * Contributors at various stages not listed above: - * Jason Wessel ( jason.wessel@windriver.com ) - * George Anzinger <george@mvista.com> - * Anurekh Saxena (anurekh.saxena@timesys.com) - * Lake Stevens Instrument Division (Glenn Engel) - * Jim Kingdon, Cygnus Support. - * - * Original KGDB stub: David Grothe <dave@gcom.com>, - * Tigran Aivazian <tigran@sco.com> - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ -#include <linux/pid_namespace.h> -#include <linux/clocksource.h> -#include <linux/interrupt.h> -#include <linux/spinlock.h> -#include <linux/console.h> -#include <linux/threads.h> -#include <linux/uaccess.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/ptrace.h> -#include <linux/reboot.h> -#include <linux/string.h> -#include <linux/delay.h> -#include <linux/sched.h> -#include <linux/sysrq.h> -#include <linux/init.h> -#include <linux/kgdb.h> -#include <linux/pid.h> -#include <linux/smp.h> -#include <linux/mm.h> - -#include <asm/cacheflush.h> -#include <asm/byteorder.h> -#include <asm/atomic.h> -#include <asm/system.h> -#include <asm/unaligned.h> - -static int kgdb_break_asap; - -#define KGDB_MAX_THREAD_QUERY 17 -struct kgdb_state { - int ex_vector; - int signo; - int err_code; - int cpu; - int pass_exception; - unsigned long thr_query; - unsigned long threadid; - long kgdb_usethreadid; - struct pt_regs *linux_regs; -}; - -/* Exception state values */ -#define DCPU_WANT_MASTER 0x1 /* Waiting to become a master kgdb cpu */ -#define DCPU_NEXT_MASTER 0x2 /* Transition from one master cpu to another */ -#define DCPU_IS_SLAVE 0x4 /* Slave cpu enter exception */ -#define DCPU_SSTEP 0x8 /* CPU is single stepping */ - -static struct debuggerinfo_struct { - void *debuggerinfo; - struct task_struct *task; - int exception_state; -} kgdb_info[NR_CPUS]; - -/** - * kgdb_connected - Is a host GDB connected to us? - */ -int kgdb_connected; -EXPORT_SYMBOL_GPL(kgdb_connected); - -/* All the KGDB handlers are installed */ -static int kgdb_io_module_registered; - -/* Guard for recursive entry */ -static int exception_level; - -static struct kgdb_io *kgdb_io_ops; -static DEFINE_SPINLOCK(kgdb_registration_lock); - -/* kgdb console driver is loaded */ -static int kgdb_con_registered; -/* determine if kgdb console output should be used */ -static int kgdb_use_con; - -static int __init opt_kgdb_con(char *str) -{ - kgdb_use_con = 1; - return 0; -} - -early_param("kgdbcon", opt_kgdb_con); - -module_param(kgdb_use_con, int, 0644); - -/* - * Holds information about breakpoints in a kernel. These breakpoints are - * added and removed by gdb. - */ -static struct kgdb_bkpt kgdb_break[KGDB_MAX_BREAKPOINTS] = { - [0 ... KGDB_MAX_BREAKPOINTS-1] = { .state = BP_UNDEFINED } -}; - -/* - * The CPU# of the active CPU, or -1 if none: - */ -atomic_t kgdb_active = ATOMIC_INIT(-1); - -/* - * We use NR_CPUs not PERCPU, in case kgdb is used to debug early - * bootup code (which might not have percpu set up yet): - */ -static atomic_t passive_cpu_wait[NR_CPUS]; -static atomic_t cpu_in_kgdb[NR_CPUS]; -atomic_t kgdb_setting_breakpoint; - -struct task_struct *kgdb_usethread; -struct task_struct *kgdb_contthread; - -int kgdb_single_step; -pid_t kgdb_sstep_pid; - -/* Our I/O buffers. */ -static char remcom_in_buffer[BUFMAX]; -static char remcom_out_buffer[BUFMAX]; - -/* Storage for the registers, in GDB format. */ -static unsigned long gdb_regs[(NUMREGBYTES + - sizeof(unsigned long) - 1) / - sizeof(unsigned long)]; - -/* to keep track of the CPU which is doing the single stepping*/ -atomic_t kgdb_cpu_doing_single_step = ATOMIC_INIT(-1); - -/* - * If you are debugging a problem where roundup (the collection of - * all other CPUs) is a problem [this should be extremely rare], - * then use the nokgdbroundup option to avoid roundup. In that case - * the other CPUs might interfere with your debugging context, so - * use this with care: - */ -static int kgdb_do_roundup = 1; - -static int __init opt_nokgdbroundup(char *str) -{ - kgdb_do_roundup = 0; - - return 0; -} - -early_param("nokgdbroundup", opt_nokgdbroundup); - -/* - * Finally, some KGDB code :-) - */ - -/* - * Weak aliases for breakpoint management, - * can be overriden by architectures when needed: - */ -int __weak kgdb_arch_set_breakpoint(unsigned long addr, char *saved_instr) -{ - int err; - - err = probe_kernel_read(saved_instr, (char *)addr, BREAK_INSTR_SIZE); - if (err) - return err; - - return probe_kernel_write((char *)addr, arch_kgdb_ops.gdb_bpt_instr, - BREAK_INSTR_SIZE); -} - -int __weak kgdb_arch_remove_breakpoint(unsigned long addr, char *bundle) -{ - return probe_kernel_write((char *)addr, - (char *)bundle, BREAK_INSTR_SIZE); -} - -int __weak kgdb_validate_break_address(unsigned long addr) -{ - char tmp_variable[BREAK_INSTR_SIZE]; - int err; - /* Validate setting the breakpoint and then removing it. In the - * remove fails, the kernel needs to emit a bad message because we - * are deep trouble not being able to put things back the way we - * found them. - */ - err = kgdb_arch_set_breakpoint(addr, tmp_variable); - if (err) - return err; - err = kgdb_arch_remove_breakpoint(addr, tmp_variable); - if (err) - printk(KERN_ERR "KGDB: Critical breakpoint error, kernel " - "memory destroyed at: %lx", addr); - return err; -} - -unsigned long __weak kgdb_arch_pc(int exception, struct pt_regs *regs) -{ - return instruction_pointer(regs); -} - -int __weak kgdb_arch_init(void) -{ - return 0; -} - -int __weak kgdb_skipexception(int exception, struct pt_regs *regs) -{ - return 0; -} - -void __weak -kgdb_post_primary_code(struct pt_regs *regs, int e_vector, int err_code) -{ - return; -} - -/** - * kgdb_disable_hw_debug - Disable hardware debugging while we in kgdb. - * @regs: Current &struct pt_regs. - * - * This function will be called if the particular architecture must - * disable hardware debugging while it is processing gdb packets or - * handling exception. - */ -void __weak kgdb_disable_hw_debug(struct pt_regs *regs) -{ -} - -/* - * GDB remote protocol parser: - */ - -static int hex(char ch) -{ - if ((ch >= 'a') && (ch <= 'f')) - return ch - 'a' + 10; - if ((ch >= '0') && (ch <= '9')) - return ch - '0'; - if ((ch >= 'A') && (ch <= 'F')) - return ch - 'A' + 10; - return -1; -} - -/* scan for the sequence $<data>#<checksum> */ -static void get_packet(char *buffer) -{ - unsigned char checksum; - unsigned char xmitcsum; - int count; - char ch; - - do { - /* - * Spin and wait around for the start character, ignore all - * other characters: - */ - while ((ch = (kgdb_io_ops->read_char())) != '$') - /* nothing */; - - kgdb_connected = 1; - checksum = 0; - xmitcsum = -1; - - count = 0; - - /* - * now, read until a # or end of buffer is found: - */ - while (count < (BUFMAX - 1)) { - ch = kgdb_io_ops->read_char(); - if (ch == '#') - break; - checksum = checksum + ch; - buffer[count] = ch; - count = count + 1; - } - buffer[count] = 0; - - if (ch == '#') { - xmitcsum = hex(kgdb_io_ops->read_char()) << 4; - xmitcsum += hex(kgdb_io_ops->read_char()); - - if (checksum != xmitcsum) - /* failed checksum */ - kgdb_io_ops->write_char('-'); - else - /* successful transfer */ - kgdb_io_ops->write_char('+'); - if (kgdb_io_ops->flush) - kgdb_io_ops->flush(); - } - } while (checksum != xmitcsum); -} - -/* - * Send the packet in buffer. - * Check for gdb connection if asked for. - */ -static void put_packet(char *buffer) -{ - unsigned char checksum; - int count; - char ch; - - /* - * $<packet info>#<checksum>. - */ - while (1) { - kgdb_io_ops->write_char('$'); - checksum = 0; - count = 0; - - while ((ch = buffer[count])) { - kgdb_io_ops->write_char(ch); - checksum += ch; - count++; - } - - kgdb_io_ops->write_char('#'); - kgdb_io_ops->write_char(hex_asc_hi(checksum)); - kgdb_io_ops->write_char(hex_asc_lo(checksum)); - if (kgdb_io_ops->flush) - kgdb_io_ops->flush(); - - /* Now see what we get in reply. */ - ch = kgdb_io_ops->read_char(); - - if (ch == 3) - ch = kgdb_io_ops->read_char(); - - /* If we get an ACK, we are done. */ - if (ch == '+') - return; - - /* - * If we get the start of another packet, this means - * that GDB is attempting to reconnect. We will NAK - * the packet being sent, and stop trying to send this - * packet. - */ - if (ch == '$') { - kgdb_io_ops->write_char('-'); - if (kgdb_io_ops->flush) - kgdb_io_ops->flush(); - return; - } - } -} - -/* - * Convert the memory pointed to by mem into hex, placing result in buf. - * Return a pointer to the last char put in buf (null). May return an error. - */ -int kgdb_mem2hex(char *mem, char *buf, int count) -{ - char *tmp; - int err; - - /* - * We use the upper half of buf as an intermediate buffer for the - * raw memory copy. Hex conversion will work against this one. - */ - tmp = buf + count; - - err = probe_kernel_read(tmp, mem, count); - if (!err) { - while (count > 0) { - buf = pack_hex_byte(buf, *tmp); - tmp++; - count--; - } - - *buf = 0; - } - - return err; -} - -/* - * Copy the binary array pointed to by buf into mem. Fix $, #, and - * 0x7d escaped with 0x7d. Return -EFAULT on failure or 0 on success. - * The input buf is overwitten with the result to write to mem. - */ -static int kgdb_ebin2mem(char *buf, char *mem, int count) -{ - int size = 0; - char *c = buf; - - while (count-- > 0) { - c[size] = *buf++; - if (c[size] == 0x7d) - c[size] = *buf++ ^ 0x20; - size++; - } - - return probe_kernel_write(mem, c, size); -} - -/* - * Convert the hex array pointed to by buf into binary to be placed in mem. - * Return a pointer to the character AFTER the last byte written. - * May return an error. - */ -int kgdb_hex2mem(char *buf, char *mem, int count) -{ - char *tmp_raw; - char *tmp_hex; - - /* - * We use the upper half of buf as an intermediate buffer for the - * raw memory that is converted from hex. - */ - tmp_raw = buf + count * 2; - - tmp_hex = tmp_raw - 1; - while (tmp_hex >= buf) { - tmp_raw--; - *tmp_raw = hex(*tmp_hex--); - *tmp_raw |= hex(*tmp_hex--) << 4; - } - - return probe_kernel_write(mem, tmp_raw, count); -} - -/* - * While we find nice hex chars, build a long_val. - * Return number of chars processed. - */ -int kgdb_hex2long(char **ptr, unsigned long *long_val) -{ - int hex_val; - int num = 0; - int negate = 0; - - *long_val = 0; - - if (**ptr == '-') { - negate = 1; - (*ptr)++; - } - while (**ptr) { - hex_val = hex(**ptr); - if (hex_val < 0) - break; - - *long_val = (*long_val << 4) | hex_val; - num++; - (*ptr)++; - } - - if (negate) - *long_val = -*long_val; - - return num; -} - -/* Write memory due to an 'M' or 'X' packet. */ -static int write_mem_msg(int binary) -{ - char *ptr = &remcom_in_buffer[1]; - unsigned long addr; - unsigned long length; - int err; - - if (kgdb_hex2long(&ptr, &addr) > 0 && *(ptr++) == ',' && - kgdb_hex2long(&ptr, &length) > 0 && *(ptr++) == ':') { - if (binary) - err = kgdb_ebin2mem(ptr, (char *)addr, length); - else - err = kgdb_hex2mem(ptr, (char *)addr, length); - if (err) - return err; - if (CACHE_FLUSH_IS_SAFE) - flush_icache_range(addr, addr + length); - return 0; - } - - return -EINVAL; -} - -static void error_packet(char *pkt, int error) -{ - error = -error; - pkt[0] = 'E'; - pkt[1] = hex_asc[(error / 10)]; - pkt[2] = hex_asc[(error % 10)]; - pkt[3] = '\0'; -} - -/* - * Thread ID accessors. We represent a flat TID space to GDB, where - * the per CPU idle threads (which under Linux all have PID 0) are - * remapped to negative TIDs. - */ - -#define BUF_THREAD_ID_SIZE 16 - -static char *pack_threadid(char *pkt, unsigned char *id) -{ - char *limit; - - limit = pkt + BUF_THREAD_ID_SIZE; - while (pkt < limit) - pkt = pack_hex_byte(pkt, *id++); - - return pkt; -} - -static void int_to_threadref(unsigned char *id, int value) -{ - unsigned char *scan; - int i = 4; - - scan = (unsigned char *)id; - while (i--) - *scan++ = 0; - put_unaligned_be32(value, scan); -} - -static struct task_struct *getthread(struct pt_regs *regs, int tid) -{ - /* - * Non-positive TIDs are remapped to the cpu shadow information - */ - if (tid == 0 || tid == -1) - tid = -atomic_read(&kgdb_active) - 2; - if (tid < -1 && tid > -NR_CPUS - 2) { - if (kgdb_info[-tid - 2].task) - return kgdb_info[-tid - 2].task; - else - return idle_task(-tid - 2); - } - if (tid <= 0) { - printk(KERN_ERR "KGDB: Internal thread select error\n"); - dump_stack(); - return NULL; - } - - /* - * find_task_by_pid_ns() does not take the tasklist lock anymore - * but is nicely RCU locked - hence is a pretty resilient - * thing to use: - */ - return find_task_by_pid_ns(tid, &init_pid_ns); -} - -/* - * Some architectures need cache flushes when we set/clear a - * breakpoint: - */ -static void kgdb_flush_swbreak_addr(unsigned long addr) -{ - if (!CACHE_FLUSH_IS_SAFE) - return; - - if (current->mm && current->mm->mmap_cache) { - flush_cache_range(current->mm->mmap_cache, - addr, addr + BREAK_INSTR_SIZE); - } - /* Force flush instruction cache if it was outside the mm */ - flush_icache_range(addr, addr + BREAK_INSTR_SIZE); -} - -/* - * SW breakpoint management: - */ -static int kgdb_activate_sw_breakpoints(void) -{ - unsigned long addr; - int error; - int ret = 0; - int i; - - for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) { - if (kgdb_break[i].state != BP_SET) - continue; - - addr = kgdb_break[i].bpt_addr; - error = kgdb_arch_set_breakpoint(addr, - kgdb_break[i].saved_instr); - if (error) { - ret = error; - printk(KERN_INFO "KGDB: BP install failed: %lx", addr); - continue; - } - - kgdb_flush_swbreak_addr(addr); - kgdb_break[i].state = BP_ACTIVE; - } - return ret; -} - -static int kgdb_set_sw_break(unsigned long addr) -{ - int err = kgdb_validate_break_address(addr); - int breakno = -1; - int i; - - if (err) - return err; - - for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) { - if ((kgdb_break[i].state == BP_SET) && - (kgdb_break[i].bpt_addr == addr)) - return -EEXIST; - } - for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) { - if (kgdb_break[i].state == BP_REMOVED && - kgdb_break[i].bpt_addr == addr) { - breakno = i; - break; - } - } - - if (breakno == -1) { - for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) { - if (kgdb_break[i].state == BP_UNDEFINED) { - breakno = i; - break; - } - } - } - - if (breakno == -1) - return -E2BIG; - - kgdb_break[breakno].state = BP_SET; - kgdb_break[breakno].type = BP_BREAKPOINT; - kgdb_break[breakno].bpt_addr = addr; - - return 0; -} - -static int kgdb_deactivate_sw_breakpoints(void) -{ - unsigned long addr; - int error; - int ret = 0; - int i; - - for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) { - if (kgdb_break[i].state != BP_ACTIVE) - continue; - addr = kgdb_break[i].bpt_addr; - error = kgdb_arch_remove_breakpoint(addr, - kgdb_break[i].saved_instr); - if (error) { - printk(KERN_INFO "KGDB: BP remove failed: %lx\n", addr); - ret = error; - } - - kgdb_flush_swbreak_addr(addr); - kgdb_break[i].state = BP_SET; - } - return ret; -} - -static int kgdb_remove_sw_break(unsigned long addr) -{ - int i; - - for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) { - if ((kgdb_break[i].state == BP_SET) && - (kgdb_break[i].bpt_addr == addr)) { - kgdb_break[i].state = BP_REMOVED; - return 0; - } - } - return -ENOENT; -} - -int kgdb_isremovedbreak(unsigned long addr) -{ - int i; - - for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) { - if ((kgdb_break[i].state == BP_REMOVED) && - (kgdb_break[i].bpt_addr == addr)) - return 1; - } - return 0; -} - -static int remove_all_break(void) -{ - unsigned long addr; - int error; - int i; - - /* Clear memory breakpoints. */ - for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) { - if (kgdb_break[i].state != BP_ACTIVE) - goto setundefined; - addr = kgdb_break[i].bpt_addr; - error = kgdb_arch_remove_breakpoint(addr, - kgdb_break[i].saved_instr); - if (error) - printk(KERN_ERR "KGDB: breakpoint remove failed: %lx\n", - addr); -setundefined: - kgdb_break[i].state = BP_UNDEFINED; - } - - /* Clear hardware breakpoints. */ - if (arch_kgdb_ops.remove_all_hw_break) - arch_kgdb_ops.remove_all_hw_break(); - - return 0; -} - -/* - * Remap normal tasks to their real PID, - * CPU shadow threads are mapped to -CPU - 2 - */ -static inline int shadow_pid(int realpid) -{ - if (realpid) - return realpid; - - return -raw_smp_processor_id() - 2; -} - -static char gdbmsgbuf[BUFMAX + 1]; - -static void kgdb_msg_write(const char *s, int len) -{ - char *bufptr; - int wcount; - int i; - - /* 'O'utput */ - gdbmsgbuf[0] = 'O'; - - /* Fill and send buffers... */ - while (len > 0) { - bufptr = gdbmsgbuf + 1; - - /* Calculate how many this time */ - if ((len << 1) > (BUFMAX - 2)) - wcount = (BUFMAX - 2) >> 1; - else - wcount = len; - - /* Pack in hex chars */ - for (i = 0; i < wcount; i++) - bufptr = pack_hex_byte(bufptr, s[i]); - *bufptr = '\0'; - - /* Move up */ - s += wcount; - len -= wcount; - - /* Write packet */ - put_packet(gdbmsgbuf); - } -} - -/* - * Return true if there is a valid kgdb I/O module. Also if no - * debugger is attached a message can be printed to the console about - * waiting for the debugger to attach. - * - * The print_wait argument is only to be true when called from inside - * the core kgdb_handle_exception, because it will wait for the - * debugger to attach. - */ -static int kgdb_io_ready(int print_wait) -{ - if (!kgdb_io_ops) - return 0; - if (kgdb_connected) - return 1; - if (atomic_read(&kgdb_setting_breakpoint)) - return 1; - if (print_wait) - printk(KERN_CRIT "KGDB: Waiting for remote debugger\n"); - return 1; -} - -/* - * All the functions that start with gdb_cmd are the various - * operations to implement the handlers for the gdbserial protocol - * where KGDB is communicating with an external debugger - */ - -/* Handle the '?' status packets */ -static void gdb_cmd_status(struct kgdb_state *ks) -{ - /* - * We know that this packet is only sent - * during initial connect. So to be safe, - * we clear out our breakpoints now in case - * GDB is reconnecting. - */ - remove_all_break(); - - remcom_out_buffer[0] = 'S'; - pack_hex_byte(&remcom_out_buffer[1], ks->signo); -} - -/* Handle the 'g' get registers request */ -static void gdb_cmd_getregs(struct kgdb_state *ks) -{ - struct task_struct *thread; - void *local_debuggerinfo; - int i; - - thread = kgdb_usethread; - if (!thread) { - thread = kgdb_info[ks->cpu].task; - local_debuggerinfo = kgdb_info[ks->cpu].debuggerinfo; - } else { - local_debuggerinfo = NULL; - for_each_online_cpu(i) { - /* - * Try to find the task on some other - * or possibly this node if we do not - * find the matching task then we try - * to approximate the results. - */ - if (thread == kgdb_info[i].task) - local_debuggerinfo = kgdb_info[i].debuggerinfo; - } - } - - /* - * All threads that don't have debuggerinfo should be - * in schedule() sleeping, since all other CPUs - * are in kgdb_wait, and thus have debuggerinfo. - */ - if (local_debuggerinfo) { - pt_regs_to_gdb_regs(gdb_regs, local_debuggerinfo); - } else { - /* - * Pull stuff saved during switch_to; nothing - * else is accessible (or even particularly - * relevant). - * - * This should be enough for a stack trace. - */ - sleeping_thread_to_gdb_regs(gdb_regs, thread); - } - kgdb_mem2hex((char *)gdb_regs, remcom_out_buffer, NUMREGBYTES); -} - -/* Handle the 'G' set registers request */ -static void gdb_cmd_setregs(struct kgdb_state *ks) -{ - kgdb_hex2mem(&remcom_in_buffer[1], (char *)gdb_regs, NUMREGBYTES); - - if (kgdb_usethread && kgdb_usethread != current) { - error_packet(remcom_out_buffer, -EINVAL); - } else { - gdb_regs_to_pt_regs(gdb_regs, ks->linux_regs); - strcpy(remcom_out_buffer, "OK"); - } -} - -/* Handle the 'm' memory read bytes */ -static void gdb_cmd_memread(struct kgdb_state *ks) -{ - char *ptr = &remcom_in_buffer[1]; - unsigned long length; - unsigned long addr; - int err; - - if (kgdb_hex2long(&ptr, &addr) > 0 && *ptr++ == ',' && - kgdb_hex2long(&ptr, &length) > 0) { - err = kgdb_mem2hex((char *)addr, remcom_out_buffer, length); - if (err) - error_packet(remcom_out_buffer, err); - } else { - error_packet(remcom_out_buffer, -EINVAL); - } -} - -/* Handle the 'M' memory write bytes */ -static void gdb_cmd_memwrite(struct kgdb_state *ks) -{ - int err = write_mem_msg(0); - - if (err) - error_packet(remcom_out_buffer, err); - else - strcpy(remcom_out_buffer, "OK"); -} - -/* Handle the 'X' memory binary write bytes */ -static void gdb_cmd_binwrite(struct kgdb_state *ks) -{ - int err = write_mem_msg(1); - - if (err) - error_packet(remcom_out_buffer, err); - else - strcpy(remcom_out_buffer, "OK"); -} - -/* Handle the 'D' or 'k', detach or kill packets */ -static void gdb_cmd_detachkill(struct kgdb_state *ks) -{ - int error; - - /* The detach case */ - if (remcom_in_buffer[0] == 'D') { - error = remove_all_break(); - if (error < 0) { - error_packet(remcom_out_buffer, error); - } else { - strcpy(remcom_out_buffer, "OK"); - kgdb_connected = 0; - } - put_packet(remcom_out_buffer); - } else { - /* - * Assume the kill case, with no exit code checking, - * trying to force detach the debugger: - */ - remove_all_break(); - kgdb_connected = 0; - } -} - -/* Handle the 'R' reboot packets */ -static int gdb_cmd_reboot(struct kgdb_state *ks) -{ - /* For now, only honor R0 */ - if (strcmp(remcom_in_buffer, "R0") == 0) { - printk(KERN_CRIT "Executing emergency reboot\n"); - strcpy(remcom_out_buffer, "OK"); - put_packet(remcom_out_buffer); - - /* - * Execution should not return from - * machine_emergency_restart() - */ - machine_emergency_restart(); - kgdb_connected = 0; - - return 1; - } - return 0; -} - -/* Handle the 'q' query packets */ -static void gdb_cmd_query(struct kgdb_state *ks) -{ - struct task_struct *g; - struct task_struct *p; - unsigned char thref[8]; - char *ptr; - int i; - int cpu; - int finished = 0; - - switch (remcom_in_buffer[1]) { - case 's': - case 'f': - if (memcmp(remcom_in_buffer + 2, "ThreadInfo", 10)) { - error_packet(remcom_out_buffer, -EINVAL); - break; - } - - i = 0; - remcom_out_buffer[0] = 'm'; - ptr = remcom_out_buffer + 1; - if (remcom_in_buffer[1] == 'f') { - /* Each cpu is a shadow thread */ - for_each_online_cpu(cpu) { - ks->thr_query = 0; - int_to_threadref(thref, -cpu - 2); - pack_threadid(ptr, thref); - ptr += BUF_THREAD_ID_SIZE; - *(ptr++) = ','; - i++; - } - } - - do_each_thread(g, p) { - if (i >= ks->thr_query && !finished) { - int_to_threadref(thref, p->pid); - pack_threadid(ptr, thref); - ptr += BUF_THREAD_ID_SIZE; - *(ptr++) = ','; - ks->thr_query++; - if (ks->thr_query % KGDB_MAX_THREAD_QUERY == 0) - finished = 1; - } - i++; - } while_each_thread(g, p); - - *(--ptr) = '\0'; - break; - - case 'C': - /* Current thread id */ - strcpy(remcom_out_buffer, "QC"); - ks->threadid = shadow_pid(current->pid); - int_to_threadref(thref, ks->threadid); - pack_threadid(remcom_out_buffer + 2, thref); - break; - case 'T': - if (memcmp(remcom_in_buffer + 1, "ThreadExtraInfo,", 16)) { - error_packet(remcom_out_buffer, -EINVAL); - break; - } - ks->threadid = 0; - ptr = remcom_in_buffer + 17; - kgdb_hex2long(&ptr, &ks->threadid); - if (!getthread(ks->linux_regs, ks->threadid)) { - error_packet(remcom_out_buffer, -EINVAL); - break; - } - if ((int)ks->threadid > 0) { - kgdb_mem2hex(getthread(ks->linux_regs, - ks->threadid)->comm, - remcom_out_buffer, 16); - } else { - static char tmpstr[23 + BUF_THREAD_ID_SIZE]; - - sprintf(tmpstr, "shadowCPU%d", - (int)(-ks->threadid - 2)); - kgdb_mem2hex(tmpstr, remcom_out_buffer, strlen(tmpstr)); - } - break; - } -} - -/* Handle the 'H' task query packets */ -static void gdb_cmd_task(struct kgdb_state *ks) -{ - struct task_struct *thread; - char *ptr; - - switch (remcom_in_buffer[1]) { - case 'g': - ptr = &remcom_in_buffer[2]; - kgdb_hex2long(&ptr, &ks->threadid); - thread = getthread(ks->linux_regs, ks->threadid); - if (!thread && ks->threadid > 0) { - error_packet(remcom_out_buffer, -EINVAL); - break; - } - kgdb_usethread = thread; - ks->kgdb_usethreadid = ks->threadid; - strcpy(remcom_out_buffer, "OK"); - break; - case 'c': - ptr = &remcom_in_buffer[2]; - kgdb_hex2long(&ptr, &ks->threadid); - if (!ks->threadid) { - kgdb_contthread = NULL; - } else { - thread = getthread(ks->linux_regs, ks->threadid); - if (!thread && ks->threadid > 0) { - error_packet(remcom_out_buffer, -EINVAL); - break; - } - kgdb_contthread = thread; - } - strcpy(remcom_out_buffer, "OK"); - break; - } -} - -/* Handle the 'T' thread query packets */ -static void gdb_cmd_thread(struct kgdb_state *ks) -{ - char *ptr = &remcom_in_buffer[1]; - struct task_struct *thread; - - kgdb_hex2long(&ptr, &ks->threadid); - thread = getthread(ks->linux_regs, ks->threadid); - if (thread) - strcpy(remcom_out_buffer, "OK"); - else - error_packet(remcom_out_buffer, -EINVAL); -} - -/* Handle the 'z' or 'Z' breakpoint remove or set packets */ -static void gdb_cmd_break(struct kgdb_state *ks) -{ - /* - * Since GDB-5.3, it's been drafted that '0' is a software - * breakpoint, '1' is a hardware breakpoint, so let's do that. - */ - char *bpt_type = &remcom_in_buffer[1]; - char *ptr = &remcom_in_buffer[2]; - unsigned long addr; - unsigned long length; - int error = 0; - - if (arch_kgdb_ops.set_hw_breakpoint && *bpt_type >= '1') { - /* Unsupported */ - if (*bpt_type > '4') - return; - } else { - if (*bpt_type != '0' && *bpt_type != '1') - /* Unsupported. */ - return; - } - - /* - * Test if this is a hardware breakpoint, and - * if we support it: - */ - if (*bpt_type == '1' && !(arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT)) - /* Unsupported. */ - return; - - if (*(ptr++) != ',') { - error_packet(remcom_out_buffer, -EINVAL); - return; - } - if (!kgdb_hex2long(&ptr, &addr)) { - error_packet(remcom_out_buffer, -EINVAL); - return; - } - if (*(ptr++) != ',' || - !kgdb_hex2long(&ptr, &length)) { - error_packet(remcom_out_buffer, -EINVAL); - return; - } - - if (remcom_in_buffer[0] == 'Z' && *bpt_type == '0') - error = kgdb_set_sw_break(addr); - else if (remcom_in_buffer[0] == 'z' && *bpt_type == '0') - error = kgdb_remove_sw_break(addr); - else if (remcom_in_buffer[0] == 'Z') - error = arch_kgdb_ops.set_hw_breakpoint(addr, - (int)length, *bpt_type - '0'); - else if (remcom_in_buffer[0] == 'z') - error = arch_kgdb_ops.remove_hw_breakpoint(addr, - (int) length, *bpt_type - '0'); - - if (error == 0) - strcpy(remcom_out_buffer, "OK"); - else - error_packet(remcom_out_buffer, error); -} - -/* Handle the 'C' signal / exception passing packets */ -static int gdb_cmd_exception_pass(struct kgdb_state *ks) -{ - /* C09 == pass exception - * C15 == detach kgdb, pass exception - */ - if (remcom_in_buffer[1] == '0' && remcom_in_buffer[2] == '9') { - - ks->pass_exception = 1; - remcom_in_buffer[0] = 'c'; - - } else if (remcom_in_buffer[1] == '1' && remcom_in_buffer[2] == '5') { - - ks->pass_exception = 1; - remcom_in_buffer[0] = 'D'; - remove_all_break(); - kgdb_connected = 0; - return 1; - - } else { - kgdb_msg_write("KGDB only knows signal 9 (pass)" - " and 15 (pass and disconnect)\n" - "Executing a continue without signal passing\n", 0); - remcom_in_buffer[0] = 'c'; - } - - /* Indicate fall through */ - return -1; -} - -/* - * This function performs all gdbserial command procesing - */ -static int gdb_serial_stub(struct kgdb_state *ks) -{ - int error = 0; - int tmp; - - /* Clear the out buffer. */ - memset(remcom_out_buffer, 0, sizeof(remcom_out_buffer)); - - if (kgdb_connected) { - unsigned char thref[8]; - char *ptr; - - /* Reply to host that an exception has occurred */ - ptr = remcom_out_buffer; - *ptr++ = 'T'; - ptr = pack_hex_byte(ptr, ks->signo); - ptr += strlen(strcpy(ptr, "thread:")); - int_to_threadref(thref, shadow_pid(current->pid)); - ptr = pack_threadid(ptr, thref); - *ptr++ = ';'; - put_packet(remcom_out_buffer); - } - - kgdb_usethread = kgdb_info[ks->cpu].task; - ks->kgdb_usethreadid = shadow_pid(kgdb_info[ks->cpu].task->pid); - ks->pass_exception = 0; - - while (1) { - error = 0; - - /* Clear the out buffer. */ - memset(remcom_out_buffer, 0, sizeof(remcom_out_buffer)); - - get_packet(remcom_in_buffer); - - switch (remcom_in_buffer[0]) { - case '?': /* gdbserial status */ - gdb_cmd_status(ks); - break; - case 'g': /* return the value of the CPU registers */ - gdb_cmd_getregs(ks); - break; - case 'G': /* set the value of the CPU registers - return OK */ - gdb_cmd_setregs(ks); - break; - case 'm': /* mAA..AA,LLLL Read LLLL bytes at address AA..AA */ - gdb_cmd_memread(ks); - break; - case 'M': /* MAA..AA,LLLL: Write LLLL bytes at address AA..AA */ - gdb_cmd_memwrite(ks); - break; - case 'X': /* XAA..AA,LLLL: Write LLLL bytes at address AA..AA */ - gdb_cmd_binwrite(ks); - break; - /* kill or detach. KGDB should treat this like a - * continue. - */ - case 'D': /* Debugger detach */ - case 'k': /* Debugger detach via kill */ - gdb_cmd_detachkill(ks); - goto default_handle; - case 'R': /* Reboot */ - if (gdb_cmd_reboot(ks)) - goto default_handle; - break; - case 'q': /* query command */ - gdb_cmd_query(ks); - break; - case 'H': /* task related */ - gdb_cmd_task(ks); - break; - case 'T': /* Query thread status */ - gdb_cmd_thread(ks); - break; - case 'z': /* Break point remove */ - case 'Z': /* Break point set */ - gdb_cmd_break(ks); - break; - case 'C': /* Exception passing */ - tmp = gdb_cmd_exception_pass(ks); - if (tmp > 0) - goto default_handle; - if (tmp == 0) - break; - /* Fall through on tmp < 0 */ - case 'c': /* Continue packet */ - case 's': /* Single step packet */ - if (kgdb_contthread && kgdb_contthread != current) { - /* Can't switch threads in kgdb */ - error_packet(remcom_out_buffer, -EINVAL); - break; - } - kgdb_activate_sw_breakpoints(); - /* Fall through to default processing */ - default: -default_handle: - error = kgdb_arch_handle_exception(ks->ex_vector, - ks->signo, - ks->err_code, - remcom_in_buffer, - remcom_out_buffer, - ks->linux_regs); - /* - * Leave cmd processing on error, detach, - * kill, continue, or single step. - */ - if (error >= 0 || remcom_in_buffer[0] == 'D' || - remcom_in_buffer[0] == 'k') { - error = 0; - goto kgdb_exit; - } - - } - - /* reply to the request */ - put_packet(remcom_out_buffer); - } - -kgdb_exit: - if (ks->pass_exception) - error = 1; - return error; -} - -static int kgdb_reenter_check(struct kgdb_state *ks) -{ - unsigned long addr; - - if (atomic_read(&kgdb_active) != raw_smp_processor_id()) - return 0; - - /* Panic on recursive debugger calls: */ - exception_level++; - addr = kgdb_arch_pc(ks->ex_vector, ks->linux_regs); - kgdb_deactivate_sw_breakpoints(); - - /* - * If the break point removed ok at the place exception - * occurred, try to recover and print a warning to the end - * user because the user planted a breakpoint in a place that - * KGDB needs in order to function. - */ - if (kgdb_remove_sw_break(addr) == 0) { - exception_level = 0; - kgdb_skipexception(ks->ex_vector, ks->linux_regs); - kgdb_activate_sw_breakpoints(); - printk(KERN_CRIT "KGDB: re-enter error: breakpoint removed %lx\n", - addr); - WARN_ON_ONCE(1); - - return 1; - } - remove_all_break(); - kgdb_skipexception(ks->ex_vector, ks->linux_regs); - - if (exception_level > 1) { - dump_stack(); - panic("Recursive entry to debugger"); - } - - printk(KERN_CRIT "KGDB: re-enter exception: ALL breakpoints killed\n"); - dump_stack(); - panic("Recursive entry to debugger"); - - return 1; -} - -static int kgdb_cpu_enter(struct kgdb_state *ks, struct pt_regs *regs) -{ - unsigned long flags; - int sstep_tries = 100; - int error = 0; - int i, cpu; - int trace_on = 0; -acquirelock: - /* - * Interrupts will be restored by the 'trap return' code, except when - * single stepping. - */ - local_irq_save(flags); - - cpu = ks->cpu; - kgdb_info[cpu].debuggerinfo = regs; - kgdb_info[cpu].task = current; - /* - * Make sure the above info reaches the primary CPU before - * our cpu_in_kgdb[] flag setting does: - */ - atomic_inc(&cpu_in_kgdb[cpu]); - - /* - * CPU will loop if it is a slave or request to become a kgdb - * master cpu and acquire the kgdb_active lock: - */ - while (1) { - if (kgdb_info[cpu].exception_state & DCPU_WANT_MASTER) { - if (atomic_cmpxchg(&kgdb_active, -1, cpu) == cpu) - break; - } else if (kgdb_info[cpu].exception_state & DCPU_IS_SLAVE) { - if (!atomic_read(&passive_cpu_wait[cpu])) - goto return_normal; - } else { -return_normal: - /* Return to normal operation by executing any - * hw breakpoint fixup. - */ - if (arch_kgdb_ops.correct_hw_break) - arch_kgdb_ops.correct_hw_break(); - if (trace_on) - tracing_on(); - atomic_dec(&cpu_in_kgdb[cpu]); - touch_softlockup_watchdog_sync(); - clocksource_touch_watchdog(); - local_irq_restore(flags); - return 0; - } - cpu_relax(); - } - - /* - * For single stepping, try to only enter on the processor - * that was single stepping. To gaurd against a deadlock, the - * kernel will only try for the value of sstep_tries before - * giving up and continuing on. - */ - if (atomic_read(&kgdb_cpu_doing_single_step) != -1 && - (kgdb_info[cpu].task && - kgdb_info[cpu].task->pid != kgdb_sstep_pid) && --sstep_tries) { - atomic_set(&kgdb_active, -1); - touch_softlockup_watchdog_sync(); - clocksource_touch_watchdog(); - local_irq_restore(flags); - - goto acquirelock; - } - - if (!kgdb_io_ready(1)) { - error = 1; - goto kgdb_restore; /* No I/O connection, so resume the system */ - } - - /* - * Don't enter if we have hit a removed breakpoint. - */ - if (kgdb_skipexception(ks->ex_vector, ks->linux_regs)) - goto kgdb_restore; - - /* Call the I/O driver's pre_exception routine */ - if (kgdb_io_ops->pre_exception) - kgdb_io_ops->pre_exception(); - - kgdb_disable_hw_debug(ks->linux_regs); - - /* - * Get the passive CPU lock which will hold all the non-primary - * CPU in a spin state while the debugger is active - */ - if (!kgdb_single_step) { - for (i = 0; i < NR_CPUS; i++) - atomic_inc(&passive_cpu_wait[i]); - } - -#ifdef CONFIG_SMP - /* Signal the other CPUs to enter kgdb_wait() */ - if ((!kgdb_single_step) && kgdb_do_roundup) - kgdb_roundup_cpus(flags); -#endif - - /* - * Wait for the other CPUs to be notified and be waiting for us: - */ - for_each_online_cpu(i) { - while (!atomic_read(&cpu_in_kgdb[i])) - cpu_relax(); - } - - /* - * At this point the primary processor is completely - * in the debugger and all secondary CPUs are quiescent - */ - kgdb_post_primary_code(ks->linux_regs, ks->ex_vector, ks->err_code); - kgdb_deactivate_sw_breakpoints(); - kgdb_single_step = 0; - kgdb_contthread = current; - exception_level = 0; - trace_on = tracing_is_on(); - if (trace_on) - tracing_off(); - - /* Talk to debugger with gdbserial protocol */ - error = gdb_serial_stub(ks); - - /* Call the I/O driver's post_exception routine */ - if (kgdb_io_ops->post_exception) - kgdb_io_ops->post_exception(); - - atomic_dec(&cpu_in_kgdb[ks->cpu]); - - if (!kgdb_single_step) { - for (i = NR_CPUS-1; i >= 0; i--) - atomic_dec(&passive_cpu_wait[i]); - /* - * Wait till all the CPUs have quit - * from the debugger. - */ - for_each_online_cpu(i) { - while (atomic_read(&cpu_in_kgdb[i])) - cpu_relax(); - } - } - -kgdb_restore: - if (atomic_read(&kgdb_cpu_doing_single_step) != -1) { - int sstep_cpu = atomic_read(&kgdb_cpu_doing_single_step); - if (kgdb_info[sstep_cpu].task) - kgdb_sstep_pid = kgdb_info[sstep_cpu].task->pid; - else - kgdb_sstep_pid = 0; - } - if (trace_on) - tracing_on(); - /* Free kgdb_active */ - atomic_set(&kgdb_active, -1); - touch_softlockup_watchdog_sync(); - clocksource_touch_watchdog(); - local_irq_restore(flags); - - return error; -} - -/* - * kgdb_handle_exception() - main entry point from a kernel exception - * - * Locking hierarchy: - * interface locks, if any (begin_session) - * kgdb lock (kgdb_active) - */ -int -kgdb_handle_exception(int evector, int signo, int ecode, struct pt_regs *regs) -{ - struct kgdb_state kgdb_var; - struct kgdb_state *ks = &kgdb_var; - int ret; - - ks->cpu = raw_smp_processor_id(); - ks->ex_vector = evector; - ks->signo = signo; - ks->ex_vector = evector; - ks->err_code = ecode; - ks->kgdb_usethreadid = 0; - ks->linux_regs = regs; - - if (kgdb_reenter_check(ks)) - return 0; /* Ouch, double exception ! */ - kgdb_info[ks->cpu].exception_state |= DCPU_WANT_MASTER; - ret = kgdb_cpu_enter(ks, regs); - kgdb_info[ks->cpu].exception_state &= ~DCPU_WANT_MASTER; - return ret; -} - -int kgdb_nmicallback(int cpu, void *regs) -{ -#ifdef CONFIG_SMP - struct kgdb_state kgdb_var; - struct kgdb_state *ks = &kgdb_var; - - memset(ks, 0, sizeof(struct kgdb_state)); - ks->cpu = cpu; - ks->linux_regs = regs; - - if (!atomic_read(&cpu_in_kgdb[cpu]) && - atomic_read(&kgdb_active) != -1 && - atomic_read(&kgdb_active) != cpu) { - kgdb_info[cpu].exception_state |= DCPU_IS_SLAVE; - kgdb_cpu_enter(ks, regs); - kgdb_info[cpu].exception_state &= ~DCPU_IS_SLAVE; - return 0; - } -#endif - return 1; -} - -static void kgdb_console_write(struct console *co, const char *s, - unsigned count) -{ - unsigned long flags; - - /* If we're debugging, or KGDB has not connected, don't try - * and print. */ - if (!kgdb_connected || atomic_read(&kgdb_active) != -1) - return; - - local_irq_save(flags); - kgdb_msg_write(s, count); - local_irq_restore(flags); -} - -static struct console kgdbcons = { - .name = "kgdb", - .write = kgdb_console_write, - .flags = CON_PRINTBUFFER | CON_ENABLED, - .index = -1, -}; - -#ifdef CONFIG_MAGIC_SYSRQ -static void sysrq_handle_gdb(int key, struct tty_struct *tty) -{ - if (!kgdb_io_ops) { - printk(KERN_CRIT "ERROR: No KGDB I/O module available\n"); - return; - } - if (!kgdb_connected) - printk(KERN_CRIT "Entering KGDB\n"); - - kgdb_breakpoint(); -} - -static struct sysrq_key_op sysrq_gdb_op = { - .handler = sysrq_handle_gdb, - .help_msg = "debug(G)", - .action_msg = "DEBUG", -}; -#endif - -static void kgdb_register_callbacks(void) -{ - if (!kgdb_io_module_registered) { - kgdb_io_module_registered = 1; - kgdb_arch_init(); -#ifdef CONFIG_MAGIC_SYSRQ - register_sysrq_key('g', &sysrq_gdb_op); -#endif - if (kgdb_use_con && !kgdb_con_registered) { - register_console(&kgdbcons); - kgdb_con_registered = 1; - } - } -} - -static void kgdb_unregister_callbacks(void) -{ - /* - * When this routine is called KGDB should unregister from the - * panic handler and clean up, making sure it is not handling any - * break exceptions at the time. - */ - if (kgdb_io_module_registered) { - kgdb_io_module_registered = 0; - kgdb_arch_exit(); -#ifdef CONFIG_MAGIC_SYSRQ - unregister_sysrq_key('g', &sysrq_gdb_op); -#endif - if (kgdb_con_registered) { - unregister_console(&kgdbcons); - kgdb_con_registered = 0; - } - } -} - -static void kgdb_initial_breakpoint(void) -{ - kgdb_break_asap = 0; - - printk(KERN_CRIT "kgdb: Waiting for connection from remote gdb...\n"); - kgdb_breakpoint(); -} - -/** - * kgdb_register_io_module - register KGDB IO module - * @new_kgdb_io_ops: the io ops vector - * - * Register it with the KGDB core. - */ -int kgdb_register_io_module(struct kgdb_io *new_kgdb_io_ops) -{ - int err; - - spin_lock(&kgdb_registration_lock); - - if (kgdb_io_ops) { - spin_unlock(&kgdb_registration_lock); - - printk(KERN_ERR "kgdb: Another I/O driver is already " - "registered with KGDB.\n"); - return -EBUSY; - } - - if (new_kgdb_io_ops->init) { - err = new_kgdb_io_ops->init(); - if (err) { - spin_unlock(&kgdb_registration_lock); - return err; - } - } - - kgdb_io_ops = new_kgdb_io_ops; - - spin_unlock(&kgdb_registration_lock); - - printk(KERN_INFO "kgdb: Registered I/O driver %s.\n", - new_kgdb_io_ops->name); - - /* Arm KGDB now. */ - kgdb_register_callbacks(); - - if (kgdb_break_asap) - kgdb_initial_breakpoint(); - - return 0; -} -EXPORT_SYMBOL_GPL(kgdb_register_io_module); - -/** - * kkgdb_unregister_io_module - unregister KGDB IO module - * @old_kgdb_io_ops: the io ops vector - * - * Unregister it with the KGDB core. - */ -void kgdb_unregister_io_module(struct kgdb_io *old_kgdb_io_ops) -{ - BUG_ON(kgdb_connected); - - /* - * KGDB is no longer able to communicate out, so - * unregister our callbacks and reset state. - */ - kgdb_unregister_callbacks(); - - spin_lock(&kgdb_registration_lock); - - WARN_ON_ONCE(kgdb_io_ops != old_kgdb_io_ops); - kgdb_io_ops = NULL; - - spin_unlock(&kgdb_registration_lock); - - printk(KERN_INFO - "kgdb: Unregistered I/O driver %s, debugger disabled.\n", - old_kgdb_io_ops->name); -} -EXPORT_SYMBOL_GPL(kgdb_unregister_io_module); - -/** - * kgdb_breakpoint - generate breakpoint exception - * - * This function will generate a breakpoint exception. It is used at the - * beginning of a program to sync up with a debugger and can be used - * otherwise as a quick means to stop program execution and "break" into - * the debugger. - */ -void kgdb_breakpoint(void) -{ - atomic_inc(&kgdb_setting_breakpoint); - wmb(); /* Sync point before breakpoint */ - arch_kgdb_breakpoint(); - wmb(); /* Sync point after breakpoint */ - atomic_dec(&kgdb_setting_breakpoint); -} -EXPORT_SYMBOL_GPL(kgdb_breakpoint); - -static int __init opt_kgdb_wait(char *str) -{ - kgdb_break_asap = 1; - - if (kgdb_io_module_registered) - kgdb_initial_breakpoint(); - - return 0; -} - -early_param("kgdbwait", opt_kgdb_wait); diff --git a/kernel/kmod.c b/kernel/kmod.c index bf0e231d970..6e9b19667a8 100644 --- a/kernel/kmod.c +++ b/kernel/kmod.c @@ -116,27 +116,16 @@ int __request_module(bool wait, const char *fmt, ...) trace_module_request(module_name, wait, _RET_IP_); - ret = call_usermodehelper(modprobe_path, argv, envp, - wait ? UMH_WAIT_PROC : UMH_WAIT_EXEC); + ret = call_usermodehelper_fns(modprobe_path, argv, envp, + wait ? UMH_WAIT_PROC : UMH_WAIT_EXEC, + NULL, NULL, NULL); + atomic_dec(&kmod_concurrent); return ret; } EXPORT_SYMBOL(__request_module); #endif /* CONFIG_MODULES */ -struct subprocess_info { - struct work_struct work; - struct completion *complete; - struct cred *cred; - char *path; - char **argv; - char **envp; - enum umh_wait wait; - int retval; - struct file *stdin; - void (*cleanup)(char **argv, char **envp); -}; - /* * This is the task which runs the usermode application */ @@ -145,36 +134,10 @@ static int ____call_usermodehelper(void *data) struct subprocess_info *sub_info = data; int retval; - BUG_ON(atomic_read(&sub_info->cred->usage) != 1); - - /* Unblock all signals */ spin_lock_irq(¤t->sighand->siglock); flush_signal_handlers(current, 1); - sigemptyset(¤t->blocked); - recalc_sigpending(); spin_unlock_irq(¤t->sighand->siglock); - /* Install the credentials */ - commit_creds(sub_info->cred); - sub_info->cred = NULL; - - /* Install input pipe when needed */ - if (sub_info->stdin) { - struct files_struct *f = current->files; - struct fdtable *fdt; - /* no races because files should be private here */ - sys_close(0); - fd_install(0, sub_info->stdin); - spin_lock(&f->file_lock); - fdt = files_fdtable(f); - FD_SET(0, fdt->open_fds); - FD_CLR(0, fdt->close_on_exec); - spin_unlock(&f->file_lock); - - /* and disallow core files too */ - current->signal->rlim[RLIMIT_CORE] = (struct rlimit){0, 0}; - } - /* We can run anywhere, unlike our parent keventd(). */ set_cpus_allowed_ptr(current, cpu_all_mask); @@ -184,9 +147,16 @@ static int ____call_usermodehelper(void *data) */ set_user_nice(current, 0); + if (sub_info->init) { + retval = sub_info->init(sub_info); + if (retval) + goto fail; + } + retval = kernel_execve(sub_info->path, sub_info->argv, sub_info->envp); /* Exec failed? */ +fail: sub_info->retval = retval; do_exit(0); } @@ -194,9 +164,7 @@ static int ____call_usermodehelper(void *data) void call_usermodehelper_freeinfo(struct subprocess_info *info) { if (info->cleanup) - (*info->cleanup)(info->argv, info->envp); - if (info->cred) - put_cred(info->cred); + (*info->cleanup)(info); kfree(info); } EXPORT_SYMBOL(call_usermodehelper_freeinfo); @@ -207,16 +175,16 @@ static int wait_for_helper(void *data) struct subprocess_info *sub_info = data; pid_t pid; - /* Install a handler: if SIGCLD isn't handled sys_wait4 won't - * populate the status, but will return -ECHILD. */ - allow_signal(SIGCHLD); + /* If SIGCLD is ignored sys_wait4 won't populate the status. */ + spin_lock_irq(¤t->sighand->siglock); + current->sighand->action[SIGCHLD-1].sa.sa_handler = SIG_DFL; + spin_unlock_irq(¤t->sighand->siglock); pid = kernel_thread(____call_usermodehelper, sub_info, SIGCHLD); if (pid < 0) { sub_info->retval = pid; } else { - int ret; - + int ret = -ECHILD; /* * Normally it is bogus to call wait4() from in-kernel because * wait4() wants to write the exit code to a userspace address. @@ -237,10 +205,7 @@ static int wait_for_helper(void *data) sub_info->retval = ret; } - if (sub_info->wait == UMH_NO_WAIT) - call_usermodehelper_freeinfo(sub_info); - else - complete(sub_info->complete); + complete(sub_info->complete); return 0; } @@ -249,15 +214,13 @@ static void __call_usermodehelper(struct work_struct *work) { struct subprocess_info *sub_info = container_of(work, struct subprocess_info, work); - pid_t pid; enum umh_wait wait = sub_info->wait; - - BUG_ON(atomic_read(&sub_info->cred->usage) != 1); + pid_t pid; /* CLONE_VFORK: wait until the usermode helper has execve'd * successfully We need the data structures to stay around * until that is done. */ - if (wait == UMH_WAIT_PROC || wait == UMH_NO_WAIT) + if (wait == UMH_WAIT_PROC) pid = kernel_thread(wait_for_helper, sub_info, CLONE_FS | CLONE_FILES | SIGCHLD); else @@ -266,15 +229,16 @@ static void __call_usermodehelper(struct work_struct *work) switch (wait) { case UMH_NO_WAIT: + call_usermodehelper_freeinfo(sub_info); break; case UMH_WAIT_PROC: if (pid > 0) break; - sub_info->retval = pid; /* FALLTHROUGH */ - case UMH_WAIT_EXEC: + if (pid < 0) + sub_info->retval = pid; complete(sub_info->complete); } } @@ -376,80 +340,37 @@ struct subprocess_info *call_usermodehelper_setup(char *path, char **argv, sub_info->path = path; sub_info->argv = argv; sub_info->envp = envp; - sub_info->cred = prepare_usermodehelper_creds(); - if (!sub_info->cred) { - kfree(sub_info); - return NULL; - } - out: return sub_info; } EXPORT_SYMBOL(call_usermodehelper_setup); /** - * call_usermodehelper_setkeys - set the session keys for usermode helper - * @info: a subprocess_info returned by call_usermodehelper_setup - * @session_keyring: the session keyring for the process - */ -void call_usermodehelper_setkeys(struct subprocess_info *info, - struct key *session_keyring) -{ -#ifdef CONFIG_KEYS - struct thread_group_cred *tgcred = info->cred->tgcred; - key_put(tgcred->session_keyring); - tgcred->session_keyring = key_get(session_keyring); -#else - BUG(); -#endif -} -EXPORT_SYMBOL(call_usermodehelper_setkeys); - -/** - * call_usermodehelper_setcleanup - set a cleanup function + * call_usermodehelper_setfns - set a cleanup/init function * @info: a subprocess_info returned by call_usermodehelper_setup * @cleanup: a cleanup function + * @init: an init function + * @data: arbitrary context sensitive data * - * The cleanup function is just befor ethe subprocess_info is about to + * The init function is used to customize the helper process prior to + * exec. A non-zero return code causes the process to error out, exit, + * and return the failure to the calling process + * + * The cleanup function is just before ethe subprocess_info is about to * be freed. This can be used for freeing the argv and envp. The * Function must be runnable in either a process context or the * context in which call_usermodehelper_exec is called. */ -void call_usermodehelper_setcleanup(struct subprocess_info *info, - void (*cleanup)(char **argv, char **envp)) +void call_usermodehelper_setfns(struct subprocess_info *info, + int (*init)(struct subprocess_info *info), + void (*cleanup)(struct subprocess_info *info), + void *data) { info->cleanup = cleanup; + info->init = init; + info->data = data; } -EXPORT_SYMBOL(call_usermodehelper_setcleanup); - -/** - * call_usermodehelper_stdinpipe - set up a pipe to be used for stdin - * @sub_info: a subprocess_info returned by call_usermodehelper_setup - * @filp: set to the write-end of a pipe - * - * This constructs a pipe, and sets the read end to be the stdin of the - * subprocess, and returns the write-end in *@filp. - */ -int call_usermodehelper_stdinpipe(struct subprocess_info *sub_info, - struct file **filp) -{ - struct file *f; - - f = create_write_pipe(0); - if (IS_ERR(f)) - return PTR_ERR(f); - *filp = f; - - f = create_read_pipe(f, 0); - if (IS_ERR(f)) { - free_write_pipe(*filp); - return PTR_ERR(f); - } - sub_info->stdin = f; - - return 0; -} -EXPORT_SYMBOL(call_usermodehelper_stdinpipe); +EXPORT_SYMBOL(call_usermodehelper_setfns); /** * call_usermodehelper_exec - start a usermode application @@ -469,9 +390,6 @@ int call_usermodehelper_exec(struct subprocess_info *sub_info, DECLARE_COMPLETION_ONSTACK(done); int retval = 0; - BUG_ON(atomic_read(&sub_info->cred->usage) != 1); - validate_creds(sub_info->cred); - helper_lock(); if (sub_info->path[0] == '\0') goto out; @@ -498,41 +416,6 @@ unlock: } EXPORT_SYMBOL(call_usermodehelper_exec); -/** - * call_usermodehelper_pipe - call a usermode helper process with a pipe stdin - * @path: path to usermode executable - * @argv: arg vector for process - * @envp: environment for process - * @filp: set to the write-end of a pipe - * - * This is a simple wrapper which executes a usermode-helper function - * with a pipe as stdin. It is implemented entirely in terms of - * lower-level call_usermodehelper_* functions. - */ -int call_usermodehelper_pipe(char *path, char **argv, char **envp, - struct file **filp) -{ - struct subprocess_info *sub_info; - int ret; - - sub_info = call_usermodehelper_setup(path, argv, envp, GFP_KERNEL); - if (sub_info == NULL) - return -ENOMEM; - - ret = call_usermodehelper_stdinpipe(sub_info, filp); - if (ret < 0) { - call_usermodehelper_freeinfo(sub_info); - return ret; - } - - ret = call_usermodehelper_exec(sub_info, UMH_WAIT_EXEC); - if (ret < 0) /* Failed to execute helper, close pipe */ - filp_close(*filp, NULL); - - return ret; -} -EXPORT_SYMBOL(call_usermodehelper_pipe); - void __init usermodehelper_init(void) { khelper_wq = create_singlethread_workqueue("khelper"); diff --git a/kernel/ksysfs.c b/kernel/ksysfs.c index 21fe3c42694..0b624e79180 100644 --- a/kernel/ksysfs.c +++ b/kernel/ksysfs.c @@ -138,7 +138,8 @@ extern const void __start_notes __attribute__((weak)); extern const void __stop_notes __attribute__((weak)); #define notes_size (&__stop_notes - &__start_notes) -static ssize_t notes_read(struct kobject *kobj, struct bin_attribute *bin_attr, +static ssize_t notes_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, char *buf, loff_t off, size_t count) { memcpy(buf, &__start_notes + off, count); diff --git a/kernel/lockdep.c b/kernel/lockdep.c index ec21304856d..54286798c37 100644 --- a/kernel/lockdep.c +++ b/kernel/lockdep.c @@ -2711,6 +2711,8 @@ void lockdep_init_map(struct lockdep_map *lock, const char *name, } EXPORT_SYMBOL_GPL(lockdep_init_map); +struct lock_class_key __lockdep_no_validate__; + /* * This gets called for every mutex_lock*()/spin_lock*() operation. * We maintain the dependency maps and validate the locking attempt: @@ -2745,6 +2747,9 @@ static int __lock_acquire(struct lockdep_map *lock, unsigned int subclass, return 0; } + if (lock->key == &__lockdep_no_validate__) + check = 1; + if (!subclass) class = lock->class_cache; /* diff --git a/kernel/module.c b/kernel/module.c index e2564580f3f..333fbcc9697 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -77,6 +77,10 @@ DEFINE_MUTEX(module_mutex); EXPORT_SYMBOL_GPL(module_mutex); static LIST_HEAD(modules); +#ifdef CONFIG_KGDB_KDB +struct list_head *kdb_modules = &modules; /* kdb needs the list of modules */ +#endif /* CONFIG_KGDB_KDB */ + /* Block module loading/unloading? */ int modules_disabled = 0; @@ -176,8 +180,6 @@ extern const struct kernel_symbol __start___ksymtab_gpl[]; extern const struct kernel_symbol __stop___ksymtab_gpl[]; extern const struct kernel_symbol __start___ksymtab_gpl_future[]; extern const struct kernel_symbol __stop___ksymtab_gpl_future[]; -extern const struct kernel_symbol __start___ksymtab_gpl_future[]; -extern const struct kernel_symbol __stop___ksymtab_gpl_future[]; extern const unsigned long __start___kcrctab[]; extern const unsigned long __start___kcrctab_gpl[]; extern const unsigned long __start___kcrctab_gpl_future[]; @@ -1182,7 +1184,7 @@ struct module_notes_attrs { struct bin_attribute attrs[0]; }; -static ssize_t module_notes_read(struct kobject *kobj, +static ssize_t module_notes_read(struct file *filp, struct kobject *kobj, struct bin_attribute *bin_attr, char *buf, loff_t pos, size_t count) { diff --git a/kernel/padata.c b/kernel/padata.c index fd03513c732..fdd8ae609ce 100644 --- a/kernel/padata.c +++ b/kernel/padata.c @@ -29,7 +29,7 @@ #include <linux/rcupdate.h> #define MAX_SEQ_NR INT_MAX - NR_CPUS -#define MAX_OBJ_NUM 10000 * NR_CPUS +#define MAX_OBJ_NUM 1000 static int padata_index_to_cpu(struct parallel_data *pd, int cpu_index) { @@ -88,7 +88,7 @@ static void padata_parallel_worker(struct work_struct *work) local_bh_enable(); } -/* +/** * padata_do_parallel - padata parallelization function * * @pinst: padata instance @@ -152,6 +152,23 @@ out: } EXPORT_SYMBOL(padata_do_parallel); +/* + * padata_get_next - Get the next object that needs serialization. + * + * Return values are: + * + * A pointer to the control struct of the next object that needs + * serialization, if present in one of the percpu reorder queues. + * + * NULL, if all percpu reorder queues are empty. + * + * -EINPROGRESS, if the next object that needs serialization will + * be parallel processed by another cpu and is not yet present in + * the cpu's reorder queue. + * + * -ENODATA, if this cpu has to do the parallel processing for + * the next object. + */ static struct padata_priv *padata_get_next(struct parallel_data *pd) { int cpu, num_cpus, empty, calc_seq_nr; @@ -173,7 +190,7 @@ static struct padata_priv *padata_get_next(struct parallel_data *pd) /* * Calculate the seq_nr of the object that should be - * next in this queue. + * next in this reorder queue. */ overrun = 0; calc_seq_nr = (atomic_read(&queue->num_obj) * num_cpus) @@ -231,7 +248,8 @@ static struct padata_priv *padata_get_next(struct parallel_data *pd) goto out; } - if (next_nr % num_cpus == next_queue->cpu_index) { + queue = per_cpu_ptr(pd->queue, smp_processor_id()); + if (queue->cpu_index == next_queue->cpu_index) { padata = ERR_PTR(-ENODATA); goto out; } @@ -247,19 +265,40 @@ static void padata_reorder(struct parallel_data *pd) struct padata_queue *queue; struct padata_instance *pinst = pd->pinst; -try_again: + /* + * We need to ensure that only one cpu can work on dequeueing of + * the reorder queue the time. Calculating in which percpu reorder + * queue the next object will arrive takes some time. A spinlock + * would be highly contended. Also it is not clear in which order + * the objects arrive to the reorder queues. So a cpu could wait to + * get the lock just to notice that there is nothing to do at the + * moment. Therefore we use a trylock and let the holder of the lock + * care for all the objects enqueued during the holdtime of the lock. + */ if (!spin_trylock_bh(&pd->lock)) - goto out; + return; while (1) { padata = padata_get_next(pd); + /* + * All reorder queues are empty, or the next object that needs + * serialization is parallel processed by another cpu and is + * still on it's way to the cpu's reorder queue, nothing to + * do for now. + */ if (!padata || PTR_ERR(padata) == -EINPROGRESS) break; + /* + * This cpu has to do the parallel processing of the next + * object. It's waiting in the cpu's parallelization queue, + * so exit imediately. + */ if (PTR_ERR(padata) == -ENODATA) { + del_timer(&pd->timer); spin_unlock_bh(&pd->lock); - goto out; + return; } queue = per_cpu_ptr(pd->queue, padata->cb_cpu); @@ -273,13 +312,27 @@ try_again: spin_unlock_bh(&pd->lock); - if (atomic_read(&pd->reorder_objects)) - goto try_again; + /* + * The next object that needs serialization might have arrived to + * the reorder queues in the meantime, we will be called again + * from the timer function if noone else cares for it. + */ + if (atomic_read(&pd->reorder_objects) + && !(pinst->flags & PADATA_RESET)) + mod_timer(&pd->timer, jiffies + HZ); + else + del_timer(&pd->timer); -out: return; } +static void padata_reorder_timer(unsigned long arg) +{ + struct parallel_data *pd = (struct parallel_data *)arg; + + padata_reorder(pd); +} + static void padata_serial_worker(struct work_struct *work) { struct padata_queue *queue; @@ -308,7 +361,7 @@ static void padata_serial_worker(struct work_struct *work) local_bh_enable(); } -/* +/** * padata_do_serial - padata serialization function * * @padata: object to be serialized. @@ -338,6 +391,7 @@ void padata_do_serial(struct padata_priv *padata) } EXPORT_SYMBOL(padata_do_serial); +/* Allocate and initialize the internal cpumask dependend resources. */ static struct parallel_data *padata_alloc_pd(struct padata_instance *pinst, const struct cpumask *cpumask) { @@ -358,17 +412,15 @@ static struct parallel_data *padata_alloc_pd(struct padata_instance *pinst, if (!alloc_cpumask_var(&pd->cpumask, GFP_KERNEL)) goto err_free_queue; - for_each_possible_cpu(cpu) { + cpumask_and(pd->cpumask, cpumask, cpu_active_mask); + + for_each_cpu(cpu, pd->cpumask) { queue = per_cpu_ptr(pd->queue, cpu); queue->pd = pd; - if (cpumask_test_cpu(cpu, cpumask) - && cpumask_test_cpu(cpu, cpu_active_mask)) { - queue->cpu_index = cpu_index; - cpu_index++; - } else - queue->cpu_index = -1; + queue->cpu_index = cpu_index; + cpu_index++; INIT_LIST_HEAD(&queue->reorder.list); INIT_LIST_HEAD(&queue->parallel.list); @@ -382,11 +434,10 @@ static struct parallel_data *padata_alloc_pd(struct padata_instance *pinst, atomic_set(&queue->num_obj, 0); } - cpumask_and(pd->cpumask, cpumask, cpu_active_mask); - num_cpus = cpumask_weight(pd->cpumask); pd->max_seq_nr = (MAX_SEQ_NR / num_cpus) * num_cpus - 1; + setup_timer(&pd->timer, padata_reorder_timer, (unsigned long)pd); atomic_set(&pd->seq_nr, -1); atomic_set(&pd->reorder_objects, 0); atomic_set(&pd->refcnt, 0); @@ -410,6 +461,31 @@ static void padata_free_pd(struct parallel_data *pd) kfree(pd); } +/* Flush all objects out of the padata queues. */ +static void padata_flush_queues(struct parallel_data *pd) +{ + int cpu; + struct padata_queue *queue; + + for_each_cpu(cpu, pd->cpumask) { + queue = per_cpu_ptr(pd->queue, cpu); + flush_work(&queue->pwork); + } + + del_timer_sync(&pd->timer); + + if (atomic_read(&pd->reorder_objects)) + padata_reorder(pd); + + for_each_cpu(cpu, pd->cpumask) { + queue = per_cpu_ptr(pd->queue, cpu); + flush_work(&queue->swork); + } + + BUG_ON(atomic_read(&pd->refcnt) != 0); +} + +/* Replace the internal control stucture with a new one. */ static void padata_replace(struct padata_instance *pinst, struct parallel_data *pd_new) { @@ -421,17 +497,13 @@ static void padata_replace(struct padata_instance *pinst, synchronize_rcu(); - while (atomic_read(&pd_old->refcnt) != 0) - yield(); - - flush_workqueue(pinst->wq); - + padata_flush_queues(pd_old); padata_free_pd(pd_old); pinst->flags &= ~PADATA_RESET; } -/* +/** * padata_set_cpumask - set the cpumask that padata should use * * @pinst: padata instance @@ -443,10 +515,10 @@ int padata_set_cpumask(struct padata_instance *pinst, struct parallel_data *pd; int err = 0; - might_sleep(); - mutex_lock(&pinst->lock); + get_online_cpus(); + pd = padata_alloc_pd(pinst, cpumask); if (!pd) { err = -ENOMEM; @@ -458,6 +530,8 @@ int padata_set_cpumask(struct padata_instance *pinst, padata_replace(pinst, pd); out: + put_online_cpus(); + mutex_unlock(&pinst->lock); return err; @@ -479,7 +553,7 @@ static int __padata_add_cpu(struct padata_instance *pinst, int cpu) return 0; } -/* +/** * padata_add_cpu - add a cpu to the padata cpumask * * @pinst: padata instance @@ -489,12 +563,12 @@ int padata_add_cpu(struct padata_instance *pinst, int cpu) { int err; - might_sleep(); - mutex_lock(&pinst->lock); + get_online_cpus(); cpumask_set_cpu(cpu, pinst->cpumask); err = __padata_add_cpu(pinst, cpu); + put_online_cpus(); mutex_unlock(&pinst->lock); @@ -517,7 +591,7 @@ static int __padata_remove_cpu(struct padata_instance *pinst, int cpu) return 0; } -/* +/** * padata_remove_cpu - remove a cpu from the padata cpumask * * @pinst: padata instance @@ -527,12 +601,12 @@ int padata_remove_cpu(struct padata_instance *pinst, int cpu) { int err; - might_sleep(); - mutex_lock(&pinst->lock); + get_online_cpus(); cpumask_clear_cpu(cpu, pinst->cpumask); err = __padata_remove_cpu(pinst, cpu); + put_online_cpus(); mutex_unlock(&pinst->lock); @@ -540,38 +614,35 @@ int padata_remove_cpu(struct padata_instance *pinst, int cpu) } EXPORT_SYMBOL(padata_remove_cpu); -/* +/** * padata_start - start the parallel processing * * @pinst: padata instance to start */ void padata_start(struct padata_instance *pinst) { - might_sleep(); - mutex_lock(&pinst->lock); pinst->flags |= PADATA_INIT; mutex_unlock(&pinst->lock); } EXPORT_SYMBOL(padata_start); -/* +/** * padata_stop - stop the parallel processing * * @pinst: padata instance to stop */ void padata_stop(struct padata_instance *pinst) { - might_sleep(); - mutex_lock(&pinst->lock); pinst->flags &= ~PADATA_INIT; mutex_unlock(&pinst->lock); } EXPORT_SYMBOL(padata_stop); -static int __cpuinit padata_cpu_callback(struct notifier_block *nfb, - unsigned long action, void *hcpu) +#ifdef CONFIG_HOTPLUG_CPU +static int padata_cpu_callback(struct notifier_block *nfb, + unsigned long action, void *hcpu) { int err; struct padata_instance *pinst; @@ -588,7 +659,7 @@ static int __cpuinit padata_cpu_callback(struct notifier_block *nfb, err = __padata_add_cpu(pinst, cpu); mutex_unlock(&pinst->lock); if (err) - return NOTIFY_BAD; + return notifier_from_errno(err); break; case CPU_DOWN_PREPARE: @@ -599,7 +670,7 @@ static int __cpuinit padata_cpu_callback(struct notifier_block *nfb, err = __padata_remove_cpu(pinst, cpu); mutex_unlock(&pinst->lock); if (err) - return NOTIFY_BAD; + return notifier_from_errno(err); break; case CPU_UP_CANCELED: @@ -621,8 +692,9 @@ static int __cpuinit padata_cpu_callback(struct notifier_block *nfb, return NOTIFY_OK; } +#endif -/* +/** * padata_alloc - allocate and initialize a padata instance * * @cpumask: cpumask that padata uses for parallelization @@ -631,7 +703,6 @@ static int __cpuinit padata_cpu_callback(struct notifier_block *nfb, struct padata_instance *padata_alloc(const struct cpumask *cpumask, struct workqueue_struct *wq) { - int err; struct padata_instance *pinst; struct parallel_data *pd; @@ -639,6 +710,8 @@ struct padata_instance *padata_alloc(const struct cpumask *cpumask, if (!pinst) goto err; + get_online_cpus(); + pd = padata_alloc_pd(pinst, cpumask); if (!pd) goto err_free_inst; @@ -654,31 +727,32 @@ struct padata_instance *padata_alloc(const struct cpumask *cpumask, pinst->flags = 0; +#ifdef CONFIG_HOTPLUG_CPU pinst->cpu_notifier.notifier_call = padata_cpu_callback; pinst->cpu_notifier.priority = 0; - err = register_hotcpu_notifier(&pinst->cpu_notifier); - if (err) - goto err_free_cpumask; + register_hotcpu_notifier(&pinst->cpu_notifier); +#endif + + put_online_cpus(); mutex_init(&pinst->lock); return pinst; -err_free_cpumask: - free_cpumask_var(pinst->cpumask); err_free_pd: padata_free_pd(pd); err_free_inst: kfree(pinst); + put_online_cpus(); err: return NULL; } EXPORT_SYMBOL(padata_alloc); -/* +/** * padata_free - free a padata instance * - * @ padata_inst: padata instance to free + * @padata_inst: padata instance to free */ void padata_free(struct padata_instance *pinst) { @@ -686,10 +760,13 @@ void padata_free(struct padata_instance *pinst) synchronize_rcu(); - while (atomic_read(&pinst->pd->refcnt) != 0) - yield(); - +#ifdef CONFIG_HOTPLUG_CPU unregister_hotcpu_notifier(&pinst->cpu_notifier); +#endif + get_online_cpus(); + padata_flush_queues(pinst->pd); + put_online_cpus(); + padata_free_pd(pinst->pd); free_cpumask_var(pinst->cpumask); kfree(pinst); diff --git a/kernel/panic.c b/kernel/panic.c index 13d966b4c14..3b16cd93fa7 100644 --- a/kernel/panic.c +++ b/kernel/panic.c @@ -87,6 +87,7 @@ NORET_TYPE void panic(const char * fmt, ...) */ preempt_disable(); + console_verbose(); bust_spinlocks(1); va_start(args, fmt); vsnprintf(buf, sizeof(buf), fmt, args); @@ -178,6 +179,7 @@ static const struct tnt tnts[] = { { TAINT_OVERRIDDEN_ACPI_TABLE, 'A', ' ' }, { TAINT_WARN, 'W', ' ' }, { TAINT_CRAP, 'C', ' ' }, + { TAINT_FIRMWARE_WORKAROUND, 'I', ' ' }, }; /** @@ -194,6 +196,7 @@ static const struct tnt tnts[] = { * 'A' - ACPI table overridden. * 'W' - Taint on warning. * 'C' - modules from drivers/staging are loaded. + * 'I' - Working around severe firmware bug. * * The string is overwritten by the next call to print_tainted(). */ @@ -365,7 +368,8 @@ struct slowpath_args { va_list args; }; -static void warn_slowpath_common(const char *file, int line, void *caller, struct slowpath_args *args) +static void warn_slowpath_common(const char *file, int line, void *caller, + unsigned taint, struct slowpath_args *args) { const char *board; @@ -381,7 +385,7 @@ static void warn_slowpath_common(const char *file, int line, void *caller, struc print_modules(); dump_stack(); print_oops_end_marker(); - add_taint(TAINT_WARN); + add_taint(taint); } void warn_slowpath_fmt(const char *file, int line, const char *fmt, ...) @@ -390,14 +394,29 @@ void warn_slowpath_fmt(const char *file, int line, const char *fmt, ...) args.fmt = fmt; va_start(args.args, fmt); - warn_slowpath_common(file, line, __builtin_return_address(0), &args); + warn_slowpath_common(file, line, __builtin_return_address(0), + TAINT_WARN, &args); va_end(args.args); } EXPORT_SYMBOL(warn_slowpath_fmt); +void warn_slowpath_fmt_taint(const char *file, int line, + unsigned taint, const char *fmt, ...) +{ + struct slowpath_args args; + + args.fmt = fmt; + va_start(args.args, fmt); + warn_slowpath_common(file, line, __builtin_return_address(0), + taint, &args); + va_end(args.args); +} +EXPORT_SYMBOL(warn_slowpath_fmt_taint); + void warn_slowpath_null(const char *file, int line) { - warn_slowpath_common(file, line, __builtin_return_address(0), NULL); + warn_slowpath_common(file, line, __builtin_return_address(0), + TAINT_WARN, NULL); } EXPORT_SYMBOL(warn_slowpath_null); #endif diff --git a/kernel/pid.c b/kernel/pid.c index aebb30d9c23..e9fd8c132d2 100644 --- a/kernel/pid.c +++ b/kernel/pid.c @@ -513,6 +513,13 @@ void __init pidhash_init(void) void __init pidmap_init(void) { + /* bump default and minimum pid_max based on number of cpus */ + pid_max = min(pid_max_max, max_t(int, pid_max, + PIDS_PER_CPU_DEFAULT * num_possible_cpus())); + pid_max_min = max_t(int, pid_max_min, + PIDS_PER_CPU_MIN * num_possible_cpus()); + pr_info("pid_max: default: %u minimum: %u\n", pid_max, pid_max_min); + init_pid_ns.pidmap[0].page = kzalloc(PAGE_SIZE, GFP_KERNEL); /* Reserve PID 0. We never call free_pidmap(0) */ set_bit(0, init_pid_ns.pidmap[0].page); diff --git a/kernel/pm_qos_params.c b/kernel/pm_qos_params.c index 3db49b9ca37..f42d3f737a3 100644 --- a/kernel/pm_qos_params.c +++ b/kernel/pm_qos_params.c @@ -2,7 +2,7 @@ * This module exposes the interface to kernel space for specifying * QoS dependencies. It provides infrastructure for registration of: * - * Dependents on a QoS value : register requirements + * Dependents on a QoS value : register requests * Watchers of QoS value : get notified when target QoS value changes * * This QoS design is best effort based. Dependents register their QoS needs. @@ -14,19 +14,21 @@ * timeout: usec <-- currently not used. * throughput: kbs (kilo byte / sec) * - * There are lists of pm_qos_objects each one wrapping requirements, notifiers + * There are lists of pm_qos_objects each one wrapping requests, notifiers * - * User mode requirements on a QOS parameter register themselves to the + * User mode requests on a QOS parameter register themselves to the * subsystem by opening the device node /dev/... and writing there request to * the node. As long as the process holds a file handle open to the node the * client continues to be accounted for. Upon file release the usermode - * requirement is removed and a new qos target is computed. This way when the - * requirement that the application has is cleaned up when closes the file + * request is removed and a new qos target is computed. This way when the + * request that the application has is cleaned up when closes the file * pointer or exits the pm_qos_object will get an opportunity to clean up. * * Mark Gross <mgross@linux.intel.com> */ +/*#define DEBUG*/ + #include <linux/pm_qos_params.h> #include <linux/sched.h> #include <linux/spinlock.h> @@ -42,25 +44,25 @@ #include <linux/uaccess.h> /* - * locking rule: all changes to requirements or notifiers lists + * locking rule: all changes to requests or notifiers lists * or pm_qos_object list and pm_qos_objects need to happen with pm_qos_lock * held, taken with _irqsave. One lock to rule them all */ -struct requirement_list { +struct pm_qos_request_list { struct list_head list; union { s32 value; s32 usec; s32 kbps; }; - char *name; + int pm_qos_class; }; static s32 max_compare(s32 v1, s32 v2); static s32 min_compare(s32 v1, s32 v2); struct pm_qos_object { - struct requirement_list requirements; + struct pm_qos_request_list requests; struct blocking_notifier_head *notifiers; struct miscdevice pm_qos_power_miscdev; char *name; @@ -72,7 +74,7 @@ struct pm_qos_object { static struct pm_qos_object null_pm_qos; static BLOCKING_NOTIFIER_HEAD(cpu_dma_lat_notifier); static struct pm_qos_object cpu_dma_pm_qos = { - .requirements = {LIST_HEAD_INIT(cpu_dma_pm_qos.requirements.list)}, + .requests = {LIST_HEAD_INIT(cpu_dma_pm_qos.requests.list)}, .notifiers = &cpu_dma_lat_notifier, .name = "cpu_dma_latency", .default_value = 2000 * USEC_PER_SEC, @@ -82,7 +84,7 @@ static struct pm_qos_object cpu_dma_pm_qos = { static BLOCKING_NOTIFIER_HEAD(network_lat_notifier); static struct pm_qos_object network_lat_pm_qos = { - .requirements = {LIST_HEAD_INIT(network_lat_pm_qos.requirements.list)}, + .requests = {LIST_HEAD_INIT(network_lat_pm_qos.requests.list)}, .notifiers = &network_lat_notifier, .name = "network_latency", .default_value = 2000 * USEC_PER_SEC, @@ -93,8 +95,7 @@ static struct pm_qos_object network_lat_pm_qos = { static BLOCKING_NOTIFIER_HEAD(network_throughput_notifier); static struct pm_qos_object network_throughput_pm_qos = { - .requirements = - {LIST_HEAD_INIT(network_throughput_pm_qos.requirements.list)}, + .requests = {LIST_HEAD_INIT(network_throughput_pm_qos.requests.list)}, .notifiers = &network_throughput_notifier, .name = "network_throughput", .default_value = 0, @@ -135,31 +136,34 @@ static s32 min_compare(s32 v1, s32 v2) } -static void update_target(int target) +static void update_target(int pm_qos_class) { s32 extreme_value; - struct requirement_list *node; + struct pm_qos_request_list *node; unsigned long flags; int call_notifier = 0; spin_lock_irqsave(&pm_qos_lock, flags); - extreme_value = pm_qos_array[target]->default_value; + extreme_value = pm_qos_array[pm_qos_class]->default_value; list_for_each_entry(node, - &pm_qos_array[target]->requirements.list, list) { - extreme_value = pm_qos_array[target]->comparitor( + &pm_qos_array[pm_qos_class]->requests.list, list) { + extreme_value = pm_qos_array[pm_qos_class]->comparitor( extreme_value, node->value); } - if (atomic_read(&pm_qos_array[target]->target_value) != extreme_value) { + if (atomic_read(&pm_qos_array[pm_qos_class]->target_value) != + extreme_value) { call_notifier = 1; - atomic_set(&pm_qos_array[target]->target_value, extreme_value); - pr_debug(KERN_ERR "new target for qos %d is %d\n", target, - atomic_read(&pm_qos_array[target]->target_value)); + atomic_set(&pm_qos_array[pm_qos_class]->target_value, + extreme_value); + pr_debug(KERN_ERR "new target for qos %d is %d\n", pm_qos_class, + atomic_read(&pm_qos_array[pm_qos_class]->target_value)); } spin_unlock_irqrestore(&pm_qos_lock, flags); if (call_notifier) - blocking_notifier_call_chain(pm_qos_array[target]->notifiers, - (unsigned long) extreme_value, NULL); + blocking_notifier_call_chain( + pm_qos_array[pm_qos_class]->notifiers, + (unsigned long) extreme_value, NULL); } static int register_pm_qos_misc(struct pm_qos_object *qos) @@ -185,125 +189,112 @@ static int find_pm_qos_object_by_minor(int minor) } /** - * pm_qos_requirement - returns current system wide qos expectation + * pm_qos_request - returns current system wide qos expectation * @pm_qos_class: identification of which qos value is requested * * This function returns the current target value in an atomic manner. */ -int pm_qos_requirement(int pm_qos_class) +int pm_qos_request(int pm_qos_class) { return atomic_read(&pm_qos_array[pm_qos_class]->target_value); } -EXPORT_SYMBOL_GPL(pm_qos_requirement); +EXPORT_SYMBOL_GPL(pm_qos_request); /** - * pm_qos_add_requirement - inserts new qos request into the list + * pm_qos_add_request - inserts new qos request into the list * @pm_qos_class: identifies which list of qos request to us - * @name: identifies the request * @value: defines the qos request * * This function inserts a new entry in the pm_qos_class list of requested qos * performance characteristics. It recomputes the aggregate QoS expectations - * for the pm_qos_class of parameters. + * for the pm_qos_class of parameters, and returns the pm_qos_request list + * element as a handle for use in updating and removal. Call needs to save + * this handle for later use. */ -int pm_qos_add_requirement(int pm_qos_class, char *name, s32 value) +struct pm_qos_request_list *pm_qos_add_request(int pm_qos_class, s32 value) { - struct requirement_list *dep; + struct pm_qos_request_list *dep; unsigned long flags; - dep = kzalloc(sizeof(struct requirement_list), GFP_KERNEL); + dep = kzalloc(sizeof(struct pm_qos_request_list), GFP_KERNEL); if (dep) { if (value == PM_QOS_DEFAULT_VALUE) dep->value = pm_qos_array[pm_qos_class]->default_value; else dep->value = value; - dep->name = kstrdup(name, GFP_KERNEL); - if (!dep->name) - goto cleanup; + dep->pm_qos_class = pm_qos_class; spin_lock_irqsave(&pm_qos_lock, flags); list_add(&dep->list, - &pm_qos_array[pm_qos_class]->requirements.list); + &pm_qos_array[pm_qos_class]->requests.list); spin_unlock_irqrestore(&pm_qos_lock, flags); update_target(pm_qos_class); - - return 0; } -cleanup: - kfree(dep); - return -ENOMEM; + return dep; } -EXPORT_SYMBOL_GPL(pm_qos_add_requirement); +EXPORT_SYMBOL_GPL(pm_qos_add_request); /** - * pm_qos_update_requirement - modifies an existing qos request - * @pm_qos_class: identifies which list of qos request to us - * @name: identifies the request + * pm_qos_update_request - modifies an existing qos request + * @pm_qos_req : handle to list element holding a pm_qos request to use * @value: defines the qos request * - * Updates an existing qos requirement for the pm_qos_class of parameters along + * Updates an existing qos request for the pm_qos_class of parameters along * with updating the target pm_qos_class value. * - * If the named request isn't in the list then no change is made. + * Attempts are made to make this code callable on hot code paths. */ -int pm_qos_update_requirement(int pm_qos_class, char *name, s32 new_value) +void pm_qos_update_request(struct pm_qos_request_list *pm_qos_req, + s32 new_value) { unsigned long flags; - struct requirement_list *node; int pending_update = 0; + s32 temp; - spin_lock_irqsave(&pm_qos_lock, flags); - list_for_each_entry(node, - &pm_qos_array[pm_qos_class]->requirements.list, list) { - if (strcmp(node->name, name) == 0) { - if (new_value == PM_QOS_DEFAULT_VALUE) - node->value = - pm_qos_array[pm_qos_class]->default_value; - else - node->value = new_value; + if (pm_qos_req) { /*guard against callers passing in null */ + spin_lock_irqsave(&pm_qos_lock, flags); + if (new_value == PM_QOS_DEFAULT_VALUE) + temp = pm_qos_array[pm_qos_req->pm_qos_class]->default_value; + else + temp = new_value; + + if (temp != pm_qos_req->value) { pending_update = 1; - break; + pm_qos_req->value = temp; } + spin_unlock_irqrestore(&pm_qos_lock, flags); + if (pending_update) + update_target(pm_qos_req->pm_qos_class); } - spin_unlock_irqrestore(&pm_qos_lock, flags); - if (pending_update) - update_target(pm_qos_class); - - return 0; } -EXPORT_SYMBOL_GPL(pm_qos_update_requirement); +EXPORT_SYMBOL_GPL(pm_qos_update_request); /** - * pm_qos_remove_requirement - modifies an existing qos request - * @pm_qos_class: identifies which list of qos request to us - * @name: identifies the request + * pm_qos_remove_request - modifies an existing qos request + * @pm_qos_req: handle to request list element * - * Will remove named qos request from pm_qos_class list of parameters and - * recompute the current target value for the pm_qos_class. + * Will remove pm qos request from the list of requests and + * recompute the current target value for the pm_qos_class. Call this + * on slow code paths. */ -void pm_qos_remove_requirement(int pm_qos_class, char *name) +void pm_qos_remove_request(struct pm_qos_request_list *pm_qos_req) { unsigned long flags; - struct requirement_list *node; - int pending_update = 0; + int qos_class; + if (pm_qos_req == NULL) + return; + /* silent return to keep pcm code cleaner */ + + qos_class = pm_qos_req->pm_qos_class; spin_lock_irqsave(&pm_qos_lock, flags); - list_for_each_entry(node, - &pm_qos_array[pm_qos_class]->requirements.list, list) { - if (strcmp(node->name, name) == 0) { - kfree(node->name); - list_del(&node->list); - kfree(node); - pending_update = 1; - break; - } - } + list_del(&pm_qos_req->list); + kfree(pm_qos_req); spin_unlock_irqrestore(&pm_qos_lock, flags); - if (pending_update) - update_target(pm_qos_class); + update_target(qos_class); } -EXPORT_SYMBOL_GPL(pm_qos_remove_requirement); +EXPORT_SYMBOL_GPL(pm_qos_remove_request); /** * pm_qos_add_notifier - sets notification entry for changes to target value @@ -313,7 +304,7 @@ EXPORT_SYMBOL_GPL(pm_qos_remove_requirement); * will register the notifier into a notification chain that gets called * upon changes to the pm_qos_class target value. */ - int pm_qos_add_notifier(int pm_qos_class, struct notifier_block *notifier) +int pm_qos_add_notifier(int pm_qos_class, struct notifier_block *notifier) { int retval; @@ -343,21 +334,16 @@ int pm_qos_remove_notifier(int pm_qos_class, struct notifier_block *notifier) } EXPORT_SYMBOL_GPL(pm_qos_remove_notifier); -#define PID_NAME_LEN 32 - static int pm_qos_power_open(struct inode *inode, struct file *filp) { - int ret; long pm_qos_class; - char name[PID_NAME_LEN]; pm_qos_class = find_pm_qos_object_by_minor(iminor(inode)); if (pm_qos_class >= 0) { - filp->private_data = (void *)pm_qos_class; - snprintf(name, PID_NAME_LEN, "process_%d", current->pid); - ret = pm_qos_add_requirement(pm_qos_class, name, - PM_QOS_DEFAULT_VALUE); - if (ret >= 0) + filp->private_data = (void *) pm_qos_add_request(pm_qos_class, + PM_QOS_DEFAULT_VALUE); + + if (filp->private_data) return 0; } return -EPERM; @@ -365,32 +351,40 @@ static int pm_qos_power_open(struct inode *inode, struct file *filp) static int pm_qos_power_release(struct inode *inode, struct file *filp) { - int pm_qos_class; - char name[PID_NAME_LEN]; + struct pm_qos_request_list *req; - pm_qos_class = (long)filp->private_data; - snprintf(name, PID_NAME_LEN, "process_%d", current->pid); - pm_qos_remove_requirement(pm_qos_class, name); + req = (struct pm_qos_request_list *)filp->private_data; + pm_qos_remove_request(req); return 0; } + static ssize_t pm_qos_power_write(struct file *filp, const char __user *buf, size_t count, loff_t *f_pos) { s32 value; - int pm_qos_class; - char name[PID_NAME_LEN]; - - pm_qos_class = (long)filp->private_data; - if (count != sizeof(s32)) + int x; + char ascii_value[11]; + struct pm_qos_request_list *pm_qos_req; + + if (count == sizeof(s32)) { + if (copy_from_user(&value, buf, sizeof(s32))) + return -EFAULT; + } else if (count == 11) { /* len('0x12345678/0') */ + if (copy_from_user(ascii_value, buf, 11)) + return -EFAULT; + x = sscanf(ascii_value, "%x", &value); + if (x != 1) + return -EINVAL; + pr_debug(KERN_ERR "%s, %d, 0x%x\n", ascii_value, x, value); + } else return -EINVAL; - if (copy_from_user(&value, buf, sizeof(s32))) - return -EFAULT; - snprintf(name, PID_NAME_LEN, "process_%d", current->pid); - pm_qos_update_requirement(pm_qos_class, name, value); - return sizeof(s32); + pm_qos_req = (struct pm_qos_request_list *)filp->private_data; + pm_qos_update_request(pm_qos_req, value); + + return count; } diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c index bc7704b3a44..9829646d399 100644 --- a/kernel/posix-cpu-timers.c +++ b/kernel/posix-cpu-timers.c @@ -11,19 +11,18 @@ #include <trace/events/timer.h> /* - * Called after updating RLIMIT_CPU to set timer expiration if necessary. + * Called after updating RLIMIT_CPU to run cpu timer and update + * tsk->signal->cputime_expires expiration cache if necessary. Needs + * siglock protection since other code may update expiration cache as + * well. */ void update_rlimit_cpu(unsigned long rlim_new) { cputime_t cputime = secs_to_cputime(rlim_new); - struct signal_struct *const sig = current->signal; - if (cputime_eq(sig->it[CPUCLOCK_PROF].expires, cputime_zero) || - cputime_gt(sig->it[CPUCLOCK_PROF].expires, cputime)) { - spin_lock_irq(¤t->sighand->siglock); - set_process_cpu_timer(current, CPUCLOCK_PROF, &cputime, NULL); - spin_unlock_irq(¤t->sighand->siglock); - } + spin_lock_irq(¤t->sighand->siglock); + set_process_cpu_timer(current, CPUCLOCK_PROF, &cputime, NULL); + spin_unlock_irq(¤t->sighand->siglock); } static int check_clock(const clockid_t which_clock) @@ -364,7 +363,7 @@ int posix_cpu_clock_get(const clockid_t which_clock, struct timespec *tp) } } else { read_lock(&tasklist_lock); - if (thread_group_leader(p) && p->signal) { + if (thread_group_leader(p) && p->sighand) { error = cpu_clock_sample_group(which_clock, p, &rtn); @@ -440,7 +439,7 @@ int posix_cpu_timer_del(struct k_itimer *timer) if (likely(p != NULL)) { read_lock(&tasklist_lock); - if (unlikely(p->signal == NULL)) { + if (unlikely(p->sighand == NULL)) { /* * We raced with the reaping of the task. * The deletion should have cleared us off the list. @@ -548,111 +547,62 @@ static inline int expires_gt(cputime_t expires, cputime_t new_exp) cputime_gt(expires, new_exp); } -static inline int expires_le(cputime_t expires, cputime_t new_exp) -{ - return !cputime_eq(expires, cputime_zero) && - cputime_le(expires, new_exp); -} /* * Insert the timer on the appropriate list before any timers that * expire later. This must be called with the tasklist_lock held - * for reading, and interrupts disabled. + * for reading, interrupts disabled and p->sighand->siglock taken. */ -static void arm_timer(struct k_itimer *timer, union cpu_time_count now) +static void arm_timer(struct k_itimer *timer) { struct task_struct *p = timer->it.cpu.task; struct list_head *head, *listpos; + struct task_cputime *cputime_expires; struct cpu_timer_list *const nt = &timer->it.cpu; struct cpu_timer_list *next; - unsigned long i; - head = (CPUCLOCK_PERTHREAD(timer->it_clock) ? - p->cpu_timers : p->signal->cpu_timers); + if (CPUCLOCK_PERTHREAD(timer->it_clock)) { + head = p->cpu_timers; + cputime_expires = &p->cputime_expires; + } else { + head = p->signal->cpu_timers; + cputime_expires = &p->signal->cputime_expires; + } head += CPUCLOCK_WHICH(timer->it_clock); - BUG_ON(!irqs_disabled()); - spin_lock(&p->sighand->siglock); - listpos = head; - if (CPUCLOCK_WHICH(timer->it_clock) == CPUCLOCK_SCHED) { - list_for_each_entry(next, head, entry) { - if (next->expires.sched > nt->expires.sched) - break; - listpos = &next->entry; - } - } else { - list_for_each_entry(next, head, entry) { - if (cputime_gt(next->expires.cpu, nt->expires.cpu)) - break; - listpos = &next->entry; - } + list_for_each_entry(next, head, entry) { + if (cpu_time_before(timer->it_clock, nt->expires, next->expires)) + break; + listpos = &next->entry; } list_add(&nt->entry, listpos); if (listpos == head) { + union cpu_time_count *exp = &nt->expires; + /* - * We are the new earliest-expiring timer. - * If we are a thread timer, there can always - * be a process timer telling us to stop earlier. + * We are the new earliest-expiring POSIX 1.b timer, hence + * need to update expiration cache. Take into account that + * for process timers we share expiration cache with itimers + * and RLIMIT_CPU and for thread timers with RLIMIT_RTTIME. */ - if (CPUCLOCK_PERTHREAD(timer->it_clock)) { - union cpu_time_count *exp = &nt->expires; - - switch (CPUCLOCK_WHICH(timer->it_clock)) { - default: - BUG(); - case CPUCLOCK_PROF: - if (expires_gt(p->cputime_expires.prof_exp, - exp->cpu)) - p->cputime_expires.prof_exp = exp->cpu; - break; - case CPUCLOCK_VIRT: - if (expires_gt(p->cputime_expires.virt_exp, - exp->cpu)) - p->cputime_expires.virt_exp = exp->cpu; - break; - case CPUCLOCK_SCHED: - if (p->cputime_expires.sched_exp == 0 || - p->cputime_expires.sched_exp > exp->sched) - p->cputime_expires.sched_exp = - exp->sched; - break; - } - } else { - struct signal_struct *const sig = p->signal; - union cpu_time_count *exp = &timer->it.cpu.expires; - - /* - * For a process timer, set the cached expiration time. - */ - switch (CPUCLOCK_WHICH(timer->it_clock)) { - default: - BUG(); - case CPUCLOCK_VIRT: - if (expires_le(sig->it[CPUCLOCK_VIRT].expires, - exp->cpu)) - break; - sig->cputime_expires.virt_exp = exp->cpu; - break; - case CPUCLOCK_PROF: - if (expires_le(sig->it[CPUCLOCK_PROF].expires, - exp->cpu)) - break; - i = sig->rlim[RLIMIT_CPU].rlim_cur; - if (i != RLIM_INFINITY && - i <= cputime_to_secs(exp->cpu)) - break; - sig->cputime_expires.prof_exp = exp->cpu; - break; - case CPUCLOCK_SCHED: - sig->cputime_expires.sched_exp = exp->sched; - break; - } + switch (CPUCLOCK_WHICH(timer->it_clock)) { + case CPUCLOCK_PROF: + if (expires_gt(cputime_expires->prof_exp, exp->cpu)) + cputime_expires->prof_exp = exp->cpu; + break; + case CPUCLOCK_VIRT: + if (expires_gt(cputime_expires->virt_exp, exp->cpu)) + cputime_expires->virt_exp = exp->cpu; + break; + case CPUCLOCK_SCHED: + if (cputime_expires->sched_exp == 0 || + cputime_expires->sched_exp > exp->sched) + cputime_expires->sched_exp = exp->sched; + break; } } - - spin_unlock(&p->sighand->siglock); } /* @@ -660,7 +610,12 @@ static void arm_timer(struct k_itimer *timer, union cpu_time_count now) */ static void cpu_timer_fire(struct k_itimer *timer) { - if (unlikely(timer->sigq == NULL)) { + if ((timer->it_sigev_notify & ~SIGEV_THREAD_ID) == SIGEV_NONE) { + /* + * User don't want any signal. + */ + timer->it.cpu.expires.sched = 0; + } else if (unlikely(timer->sigq == NULL)) { /* * This a special case for clock_nanosleep, * not a normal timer from sys_timer_create. @@ -721,7 +676,7 @@ int posix_cpu_timer_set(struct k_itimer *timer, int flags, struct itimerspec *new, struct itimerspec *old) { struct task_struct *p = timer->it.cpu.task; - union cpu_time_count old_expires, new_expires, val; + union cpu_time_count old_expires, new_expires, old_incr, val; int ret; if (unlikely(p == NULL)) { @@ -736,10 +691,10 @@ int posix_cpu_timer_set(struct k_itimer *timer, int flags, read_lock(&tasklist_lock); /* * We need the tasklist_lock to protect against reaping that - * clears p->signal. If p has just been reaped, we can no + * clears p->sighand. If p has just been reaped, we can no * longer get any information about it at all. */ - if (unlikely(p->signal == NULL)) { + if (unlikely(p->sighand == NULL)) { read_unlock(&tasklist_lock); put_task_struct(p); timer->it.cpu.task = NULL; @@ -752,6 +707,7 @@ int posix_cpu_timer_set(struct k_itimer *timer, int flags, BUG_ON(!irqs_disabled()); ret = 0; + old_incr = timer->it.cpu.incr; spin_lock(&p->sighand->siglock); old_expires = timer->it.cpu.expires; if (unlikely(timer->it.cpu.firing)) { @@ -759,7 +715,6 @@ int posix_cpu_timer_set(struct k_itimer *timer, int flags, ret = TIMER_RETRY; } else list_del_init(&timer->it.cpu.entry); - spin_unlock(&p->sighand->siglock); /* * We need to sample the current value to convert the new @@ -813,6 +768,7 @@ int posix_cpu_timer_set(struct k_itimer *timer, int flags, * disable this firing since we are already reporting * it as an overrun (thanks to bump_cpu_timer above). */ + spin_unlock(&p->sighand->siglock); read_unlock(&tasklist_lock); goto out; } @@ -828,11 +784,11 @@ int posix_cpu_timer_set(struct k_itimer *timer, int flags, */ timer->it.cpu.expires = new_expires; if (new_expires.sched != 0 && - (timer->it_sigev_notify & ~SIGEV_THREAD_ID) != SIGEV_NONE && cpu_time_before(timer->it_clock, val, new_expires)) { - arm_timer(timer, val); + arm_timer(timer); } + spin_unlock(&p->sighand->siglock); read_unlock(&tasklist_lock); /* @@ -853,7 +809,6 @@ int posix_cpu_timer_set(struct k_itimer *timer, int flags, timer->it_overrun = -1; if (new_expires.sched != 0 && - (timer->it_sigev_notify & ~SIGEV_THREAD_ID) != SIGEV_NONE && !cpu_time_before(timer->it_clock, val, new_expires)) { /* * The designated time already passed, so we notify @@ -867,7 +822,7 @@ int posix_cpu_timer_set(struct k_itimer *timer, int flags, out: if (old) { sample_to_timespec(timer->it_clock, - timer->it.cpu.incr, &old->it_interval); + old_incr, &old->it_interval); } return ret; } @@ -908,7 +863,7 @@ void posix_cpu_timer_get(struct k_itimer *timer, struct itimerspec *itp) clear_dead = p->exit_state; } else { read_lock(&tasklist_lock); - if (unlikely(p->signal == NULL)) { + if (unlikely(p->sighand == NULL)) { /* * The process has been reaped. * We can't even collect a sample any more. @@ -927,25 +882,6 @@ void posix_cpu_timer_get(struct k_itimer *timer, struct itimerspec *itp) read_unlock(&tasklist_lock); } - if ((timer->it_sigev_notify & ~SIGEV_THREAD_ID) == SIGEV_NONE) { - if (timer->it.cpu.incr.sched == 0 && - cpu_time_before(timer->it_clock, - timer->it.cpu.expires, now)) { - /* - * Do-nothing timer expired and has no reload, - * so it's as if it was never set. - */ - timer->it.cpu.expires.sched = 0; - itp->it_value.tv_sec = itp->it_value.tv_nsec = 0; - return; - } - /* - * Account for any expirations and reloads that should - * have happened. - */ - bump_cpu_timer(timer, now); - } - if (unlikely(clear_dead)) { /* * We've noticed that the thread is dead, but @@ -1066,16 +1002,9 @@ static void stop_process_timers(struct signal_struct *sig) struct thread_group_cputimer *cputimer = &sig->cputimer; unsigned long flags; - if (!cputimer->running) - return; - spin_lock_irqsave(&cputimer->lock, flags); cputimer->running = 0; spin_unlock_irqrestore(&cputimer->lock, flags); - - sig->cputime_expires.prof_exp = cputime_zero; - sig->cputime_expires.virt_exp = cputime_zero; - sig->cputime_expires.sched_exp = 0; } static u32 onecputick; @@ -1112,6 +1041,23 @@ static void check_cpu_itimer(struct task_struct *tsk, struct cpu_itimer *it, } } +/** + * task_cputime_zero - Check a task_cputime struct for all zero fields. + * + * @cputime: The struct to compare. + * + * Checks @cputime to see if all fields are zero. Returns true if all fields + * are zero, false if any field is nonzero. + */ +static inline int task_cputime_zero(const struct task_cputime *cputime) +{ + if (cputime_eq(cputime->utime, cputime_zero) && + cputime_eq(cputime->stime, cputime_zero) && + cputime->sum_exec_runtime == 0) + return 1; + return 0; +} + /* * Check for any per-thread CPU timers that have fired and move them * off the tsk->*_timers list onto the firing list. Per-thread timers @@ -1129,19 +1075,6 @@ static void check_process_timers(struct task_struct *tsk, unsigned long soft; /* - * Don't sample the current process CPU clocks if there are no timers. - */ - if (list_empty(&timers[CPUCLOCK_PROF]) && - cputime_eq(sig->it[CPUCLOCK_PROF].expires, cputime_zero) && - sig->rlim[RLIMIT_CPU].rlim_cur == RLIM_INFINITY && - list_empty(&timers[CPUCLOCK_VIRT]) && - cputime_eq(sig->it[CPUCLOCK_VIRT].expires, cputime_zero) && - list_empty(&timers[CPUCLOCK_SCHED])) { - stop_process_timers(sig); - return; - } - - /* * Collect the current process totals. */ thread_group_cputimer(tsk, &cputime); @@ -1230,18 +1163,11 @@ static void check_process_timers(struct task_struct *tsk, } } - if (!cputime_eq(prof_expires, cputime_zero) && - (cputime_eq(sig->cputime_expires.prof_exp, cputime_zero) || - cputime_gt(sig->cputime_expires.prof_exp, prof_expires))) - sig->cputime_expires.prof_exp = prof_expires; - if (!cputime_eq(virt_expires, cputime_zero) && - (cputime_eq(sig->cputime_expires.virt_exp, cputime_zero) || - cputime_gt(sig->cputime_expires.virt_exp, virt_expires))) - sig->cputime_expires.virt_exp = virt_expires; - if (sched_expires != 0 && - (sig->cputime_expires.sched_exp == 0 || - sig->cputime_expires.sched_exp > sched_expires)) - sig->cputime_expires.sched_exp = sched_expires; + sig->cputime_expires.prof_exp = prof_expires; + sig->cputime_expires.virt_exp = virt_expires; + sig->cputime_expires.sched_exp = sched_expires; + if (task_cputime_zero(&sig->cputime_expires)) + stop_process_timers(sig); } /* @@ -1270,9 +1196,10 @@ void posix_cpu_timer_schedule(struct k_itimer *timer) goto out; } read_lock(&tasklist_lock); /* arm_timer needs it. */ + spin_lock(&p->sighand->siglock); } else { read_lock(&tasklist_lock); - if (unlikely(p->signal == NULL)) { + if (unlikely(p->sighand == NULL)) { /* * The process has been reaped. * We can't even collect a sample any more. @@ -1290,6 +1217,7 @@ void posix_cpu_timer_schedule(struct k_itimer *timer) clear_dead_task(timer, now); goto out_unlock; } + spin_lock(&p->sighand->siglock); cpu_timer_sample_group(timer->it_clock, p, &now); bump_cpu_timer(timer, now); /* Leave the tasklist_lock locked for the call below. */ @@ -1298,7 +1226,9 @@ void posix_cpu_timer_schedule(struct k_itimer *timer) /* * Now re-arm for the new expiry time. */ - arm_timer(timer, now); + BUG_ON(!irqs_disabled()); + arm_timer(timer); + spin_unlock(&p->sighand->siglock); out_unlock: read_unlock(&tasklist_lock); @@ -1310,23 +1240,6 @@ out: } /** - * task_cputime_zero - Check a task_cputime struct for all zero fields. - * - * @cputime: The struct to compare. - * - * Checks @cputime to see if all fields are zero. Returns true if all fields - * are zero, false if any field is nonzero. - */ -static inline int task_cputime_zero(const struct task_cputime *cputime) -{ - if (cputime_eq(cputime->utime, cputime_zero) && - cputime_eq(cputime->stime, cputime_zero) && - cputime->sum_exec_runtime == 0) - return 1; - return 0; -} - -/** * task_cputime_expired - Compare two task_cputime entities. * * @sample: The task_cputime structure to be checked for expiration. @@ -1382,7 +1295,7 @@ static inline int fastpath_timer_check(struct task_struct *tsk) } sig = tsk->signal; - if (!task_cputime_zero(&sig->cputime_expires)) { + if (sig->cputimer.running) { struct task_cputime group_sample; thread_group_cputimer(tsk, &group_sample); @@ -1390,7 +1303,7 @@ static inline int fastpath_timer_check(struct task_struct *tsk) return 1; } - return sig->rlim[RLIMIT_CPU].rlim_cur != RLIM_INFINITY; + return 0; } /* @@ -1419,7 +1332,12 @@ void run_posix_cpu_timers(struct task_struct *tsk) * put them on the firing list. */ check_thread_timers(tsk, &firing); - check_process_timers(tsk, &firing); + /* + * If there are any active process wide timers (POSIX 1.b, itimers, + * RLIMIT_CPU) cputimer must be running. + */ + if (tsk->signal->cputimer.running) + check_process_timers(tsk, &firing); /* * We must release these locks before taking any timer's lock. @@ -1456,21 +1374,23 @@ void run_posix_cpu_timers(struct task_struct *tsk) } /* - * Set one of the process-wide special case CPU timers. + * Set one of the process-wide special case CPU timers or RLIMIT_CPU. * The tsk->sighand->siglock must be held by the caller. - * The *newval argument is relative and we update it to be absolute, *oldval - * is absolute and we update it to be relative. */ void set_process_cpu_timer(struct task_struct *tsk, unsigned int clock_idx, cputime_t *newval, cputime_t *oldval) { union cpu_time_count now; - struct list_head *head; BUG_ON(clock_idx == CPUCLOCK_SCHED); cpu_timer_sample_group(clock_idx, tsk, &now); if (oldval) { + /* + * We are setting itimer. The *oldval is absolute and we update + * it to be relative, *newval argument is relative and we update + * it to be absolute. + */ if (!cputime_eq(*oldval, cputime_zero)) { if (cputime_le(*oldval, now.cpu)) { /* Just about to fire. */ @@ -1483,33 +1403,21 @@ void set_process_cpu_timer(struct task_struct *tsk, unsigned int clock_idx, if (cputime_eq(*newval, cputime_zero)) return; *newval = cputime_add(*newval, now.cpu); - - /* - * If the RLIMIT_CPU timer will expire before the - * ITIMER_PROF timer, we have nothing else to do. - */ - if (tsk->signal->rlim[RLIMIT_CPU].rlim_cur - < cputime_to_secs(*newval)) - return; } /* - * Check whether there are any process timers already set to fire - * before this one. If so, we don't have anything more to do. + * Update expiration cache if we are the earliest timer, or eventually + * RLIMIT_CPU limit is earlier than prof_exp cpu timer expire. */ - head = &tsk->signal->cpu_timers[clock_idx]; - if (list_empty(head) || - cputime_ge(list_first_entry(head, - struct cpu_timer_list, entry)->expires.cpu, - *newval)) { - switch (clock_idx) { - case CPUCLOCK_PROF: + switch (clock_idx) { + case CPUCLOCK_PROF: + if (expires_gt(tsk->signal->cputime_expires.prof_exp, *newval)) tsk->signal->cputime_expires.prof_exp = *newval; - break; - case CPUCLOCK_VIRT: + break; + case CPUCLOCK_VIRT: + if (expires_gt(tsk->signal->cputime_expires.virt_exp, *newval)) tsk->signal->cputime_expires.virt_exp = *newval; - break; - } + break; } } diff --git a/kernel/power/Makefile b/kernel/power/Makefile index 43191815f87..524e058dcf0 100644 --- a/kernel/power/Makefile +++ b/kernel/power/Makefile @@ -8,7 +8,8 @@ obj-$(CONFIG_PM_SLEEP) += console.o obj-$(CONFIG_FREEZER) += process.o obj-$(CONFIG_SUSPEND) += suspend.o obj-$(CONFIG_PM_TEST_SUSPEND) += suspend_test.o -obj-$(CONFIG_HIBERNATION) += hibernate.o snapshot.o swap.o user.o +obj-$(CONFIG_HIBERNATION) += hibernate.o snapshot.o swap.o user.o \ + block_io.o obj-$(CONFIG_HIBERNATION_NVS) += hibernate_nvs.o obj-$(CONFIG_MAGIC_SYSRQ) += poweroff.o diff --git a/kernel/power/block_io.c b/kernel/power/block_io.c new file mode 100644 index 00000000000..97024fd40cd --- /dev/null +++ b/kernel/power/block_io.c @@ -0,0 +1,103 @@ +/* + * This file provides functions for block I/O operations on swap/file. + * + * Copyright (C) 1998,2001-2005 Pavel Machek <pavel@ucw.cz> + * Copyright (C) 2006 Rafael J. Wysocki <rjw@sisk.pl> + * + * This file is released under the GPLv2. + */ + +#include <linux/bio.h> +#include <linux/kernel.h> +#include <linux/pagemap.h> +#include <linux/swap.h> + +#include "power.h" + +/** + * submit - submit BIO request. + * @rw: READ or WRITE. + * @off physical offset of page. + * @page: page we're reading or writing. + * @bio_chain: list of pending biod (for async reading) + * + * Straight from the textbook - allocate and initialize the bio. + * If we're reading, make sure the page is marked as dirty. + * Then submit it and, if @bio_chain == NULL, wait. + */ +static int submit(int rw, struct block_device *bdev, sector_t sector, + struct page *page, struct bio **bio_chain) +{ + const int bio_rw = rw | (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG); + struct bio *bio; + + bio = bio_alloc(__GFP_WAIT | __GFP_HIGH, 1); + bio->bi_sector = sector; + bio->bi_bdev = bdev; + bio->bi_end_io = end_swap_bio_read; + + if (bio_add_page(bio, page, PAGE_SIZE, 0) < PAGE_SIZE) { + printk(KERN_ERR "PM: Adding page to bio failed at %llu\n", + (unsigned long long)sector); + bio_put(bio); + return -EFAULT; + } + + lock_page(page); + bio_get(bio); + + if (bio_chain == NULL) { + submit_bio(bio_rw, bio); + wait_on_page_locked(page); + if (rw == READ) + bio_set_pages_dirty(bio); + bio_put(bio); + } else { + if (rw == READ) + get_page(page); /* These pages are freed later */ + bio->bi_private = *bio_chain; + *bio_chain = bio; + submit_bio(bio_rw, bio); + } + return 0; +} + +int hib_bio_read_page(pgoff_t page_off, void *addr, struct bio **bio_chain) +{ + return submit(READ, hib_resume_bdev, page_off * (PAGE_SIZE >> 9), + virt_to_page(addr), bio_chain); +} + +int hib_bio_write_page(pgoff_t page_off, void *addr, struct bio **bio_chain) +{ + return submit(WRITE, hib_resume_bdev, page_off * (PAGE_SIZE >> 9), + virt_to_page(addr), bio_chain); +} + +int hib_wait_on_bio_chain(struct bio **bio_chain) +{ + struct bio *bio; + struct bio *next_bio; + int ret = 0; + + if (bio_chain == NULL) + return 0; + + bio = *bio_chain; + if (bio == NULL) + return 0; + while (bio) { + struct page *page; + + next_bio = bio->bi_private; + page = bio->bi_io_vec[0].bv_page; + wait_on_page_locked(page); + if (!PageUptodate(page) || PageError(page)) + ret = -EIO; + put_page(page); + bio_put(bio); + bio = next_bio; + } + *bio_chain = NULL; + return ret; +} diff --git a/kernel/power/power.h b/kernel/power/power.h index 46c5a26630a..006270fe382 100644 --- a/kernel/power/power.h +++ b/kernel/power/power.h @@ -97,24 +97,12 @@ extern int hibernate_preallocate_memory(void); */ struct snapshot_handle { - loff_t offset; /* number of the last byte ready for reading - * or writing in the sequence - */ unsigned int cur; /* number of the block of PAGE_SIZE bytes the * next operation will refer to (ie. current) */ - unsigned int cur_offset; /* offset with respect to the current - * block (for the next operation) - */ - unsigned int prev; /* number of the block of PAGE_SIZE bytes that - * was the current one previously - */ void *buffer; /* address of the block to read from * or write to */ - unsigned int buf_offset; /* location to read from or write to, - * given as a displacement from 'buffer' - */ int sync_read; /* Set to one to notify the caller of * snapshot_write_next() that it may * need to call wait_on_bio_chain() @@ -125,12 +113,12 @@ struct snapshot_handle { * snapshot_read_next()/snapshot_write_next() is allowed to * read/write data after the function returns */ -#define data_of(handle) ((handle).buffer + (handle).buf_offset) +#define data_of(handle) ((handle).buffer) extern unsigned int snapshot_additional_pages(struct zone *zone); extern unsigned long snapshot_get_image_size(void); -extern int snapshot_read_next(struct snapshot_handle *handle, size_t count); -extern int snapshot_write_next(struct snapshot_handle *handle, size_t count); +extern int snapshot_read_next(struct snapshot_handle *handle); +extern int snapshot_write_next(struct snapshot_handle *handle); extern void snapshot_write_finalize(struct snapshot_handle *handle); extern int snapshot_image_loaded(struct snapshot_handle *handle); @@ -154,6 +142,15 @@ extern int swsusp_read(unsigned int *flags_p); extern int swsusp_write(unsigned int flags); extern void swsusp_close(fmode_t); +/* kernel/power/block_io.c */ +extern struct block_device *hib_resume_bdev; + +extern int hib_bio_read_page(pgoff_t page_off, void *addr, + struct bio **bio_chain); +extern int hib_bio_write_page(pgoff_t page_off, void *addr, + struct bio **bio_chain); +extern int hib_wait_on_bio_chain(struct bio **bio_chain); + struct timeval; /* kernel/power/swsusp.c */ extern void swsusp_show_speed(struct timeval *, struct timeval *, diff --git a/kernel/power/snapshot.c b/kernel/power/snapshot.c index be861c26dda..25ce010e9f8 100644 --- a/kernel/power/snapshot.c +++ b/kernel/power/snapshot.c @@ -1604,14 +1604,9 @@ pack_pfns(unsigned long *buf, struct memory_bitmap *bm) * snapshot_handle structure. The structure gets updated and a pointer * to it should be passed to this function every next time. * - * The @count parameter should contain the number of bytes the caller - * wants to read from the snapshot. It must not be zero. - * * On success the function returns a positive number. Then, the caller * is allowed to read up to the returned number of bytes from the memory - * location computed by the data_of() macro. The number returned - * may be smaller than @count, but this only happens if the read would - * cross a page boundary otherwise. + * location computed by the data_of() macro. * * The function returns 0 to indicate the end of data stream condition, * and a negative number is returned on error. In such cases the @@ -1619,7 +1614,7 @@ pack_pfns(unsigned long *buf, struct memory_bitmap *bm) * any more. */ -int snapshot_read_next(struct snapshot_handle *handle, size_t count) +int snapshot_read_next(struct snapshot_handle *handle) { if (handle->cur > nr_meta_pages + nr_copy_pages) return 0; @@ -1630,7 +1625,7 @@ int snapshot_read_next(struct snapshot_handle *handle, size_t count) if (!buffer) return -ENOMEM; } - if (!handle->offset) { + if (!handle->cur) { int error; error = init_header((struct swsusp_info *)buffer); @@ -1639,42 +1634,30 @@ int snapshot_read_next(struct snapshot_handle *handle, size_t count) handle->buffer = buffer; memory_bm_position_reset(&orig_bm); memory_bm_position_reset(©_bm); - } - if (handle->prev < handle->cur) { - if (handle->cur <= nr_meta_pages) { - memset(buffer, 0, PAGE_SIZE); - pack_pfns(buffer, &orig_bm); - } else { - struct page *page; + } else if (handle->cur <= nr_meta_pages) { + memset(buffer, 0, PAGE_SIZE); + pack_pfns(buffer, &orig_bm); + } else { + struct page *page; - page = pfn_to_page(memory_bm_next_pfn(©_bm)); - if (PageHighMem(page)) { - /* Highmem pages are copied to the buffer, - * because we can't return with a kmapped - * highmem page (we may not be called again). - */ - void *kaddr; + page = pfn_to_page(memory_bm_next_pfn(©_bm)); + if (PageHighMem(page)) { + /* Highmem pages are copied to the buffer, + * because we can't return with a kmapped + * highmem page (we may not be called again). + */ + void *kaddr; - kaddr = kmap_atomic(page, KM_USER0); - memcpy(buffer, kaddr, PAGE_SIZE); - kunmap_atomic(kaddr, KM_USER0); - handle->buffer = buffer; - } else { - handle->buffer = page_address(page); - } + kaddr = kmap_atomic(page, KM_USER0); + memcpy(buffer, kaddr, PAGE_SIZE); + kunmap_atomic(kaddr, KM_USER0); + handle->buffer = buffer; + } else { + handle->buffer = page_address(page); } - handle->prev = handle->cur; - } - handle->buf_offset = handle->cur_offset; - if (handle->cur_offset + count >= PAGE_SIZE) { - count = PAGE_SIZE - handle->cur_offset; - handle->cur_offset = 0; - handle->cur++; - } else { - handle->cur_offset += count; } - handle->offset += count; - return count; + handle->cur++; + return PAGE_SIZE; } /** @@ -2133,14 +2116,9 @@ static void *get_buffer(struct memory_bitmap *bm, struct chain_allocator *ca) * snapshot_handle structure. The structure gets updated and a pointer * to it should be passed to this function every next time. * - * The @count parameter should contain the number of bytes the caller - * wants to write to the image. It must not be zero. - * * On success the function returns a positive number. Then, the caller * is allowed to write up to the returned number of bytes to the memory - * location computed by the data_of() macro. The number returned - * may be smaller than @count, but this only happens if the write would - * cross a page boundary otherwise. + * location computed by the data_of() macro. * * The function returns 0 to indicate the "end of file" condition, * and a negative number is returned on error. In such cases the @@ -2148,16 +2126,18 @@ static void *get_buffer(struct memory_bitmap *bm, struct chain_allocator *ca) * any more. */ -int snapshot_write_next(struct snapshot_handle *handle, size_t count) +int snapshot_write_next(struct snapshot_handle *handle) { static struct chain_allocator ca; int error = 0; /* Check if we have already loaded the entire image */ - if (handle->prev && handle->cur > nr_meta_pages + nr_copy_pages) + if (handle->cur > 1 && handle->cur > nr_meta_pages + nr_copy_pages) return 0; - if (handle->offset == 0) { + handle->sync_read = 1; + + if (!handle->cur) { if (!buffer) /* This makes the buffer be freed by swsusp_free() */ buffer = get_image_page(GFP_ATOMIC, PG_ANY); @@ -2166,56 +2146,43 @@ int snapshot_write_next(struct snapshot_handle *handle, size_t count) return -ENOMEM; handle->buffer = buffer; - } - handle->sync_read = 1; - if (handle->prev < handle->cur) { - if (handle->prev == 0) { - error = load_header(buffer); - if (error) - return error; + } else if (handle->cur == 1) { + error = load_header(buffer); + if (error) + return error; - error = memory_bm_create(©_bm, GFP_ATOMIC, PG_ANY); - if (error) - return error; + error = memory_bm_create(©_bm, GFP_ATOMIC, PG_ANY); + if (error) + return error; + + } else if (handle->cur <= nr_meta_pages + 1) { + error = unpack_orig_pfns(buffer, ©_bm); + if (error) + return error; - } else if (handle->prev <= nr_meta_pages) { - error = unpack_orig_pfns(buffer, ©_bm); + if (handle->cur == nr_meta_pages + 1) { + error = prepare_image(&orig_bm, ©_bm); if (error) return error; - if (handle->prev == nr_meta_pages) { - error = prepare_image(&orig_bm, ©_bm); - if (error) - return error; - - chain_init(&ca, GFP_ATOMIC, PG_SAFE); - memory_bm_position_reset(&orig_bm); - restore_pblist = NULL; - handle->buffer = get_buffer(&orig_bm, &ca); - handle->sync_read = 0; - if (IS_ERR(handle->buffer)) - return PTR_ERR(handle->buffer); - } - } else { - copy_last_highmem_page(); + chain_init(&ca, GFP_ATOMIC, PG_SAFE); + memory_bm_position_reset(&orig_bm); + restore_pblist = NULL; handle->buffer = get_buffer(&orig_bm, &ca); + handle->sync_read = 0; if (IS_ERR(handle->buffer)) return PTR_ERR(handle->buffer); - if (handle->buffer != buffer) - handle->sync_read = 0; } - handle->prev = handle->cur; - } - handle->buf_offset = handle->cur_offset; - if (handle->cur_offset + count >= PAGE_SIZE) { - count = PAGE_SIZE - handle->cur_offset; - handle->cur_offset = 0; - handle->cur++; } else { - handle->cur_offset += count; + copy_last_highmem_page(); + handle->buffer = get_buffer(&orig_bm, &ca); + if (IS_ERR(handle->buffer)) + return PTR_ERR(handle->buffer); + if (handle->buffer != buffer) + handle->sync_read = 0; } - handle->offset += count; - return count; + handle->cur++; + return PAGE_SIZE; } /** @@ -2230,7 +2197,7 @@ void snapshot_write_finalize(struct snapshot_handle *handle) { copy_last_highmem_page(); /* Free only if we have loaded the image entirely */ - if (handle->prev && handle->cur > nr_meta_pages + nr_copy_pages) { + if (handle->cur > 1 && handle->cur > nr_meta_pages + nr_copy_pages) { memory_bm_free(&orig_bm, PG_UNSAFE_CLEAR); free_highmem_data(); } diff --git a/kernel/power/swap.c b/kernel/power/swap.c index 66824d71983..b0bb2177839 100644 --- a/kernel/power/swap.c +++ b/kernel/power/swap.c @@ -29,6 +29,40 @@ #define SWSUSP_SIG "S1SUSPEND" +/* + * The swap map is a data structure used for keeping track of each page + * written to a swap partition. It consists of many swap_map_page + * structures that contain each an array of MAP_PAGE_SIZE swap entries. + * These structures are stored on the swap and linked together with the + * help of the .next_swap member. + * + * The swap map is created during suspend. The swap map pages are + * allocated and populated one at a time, so we only need one memory + * page to set up the entire structure. + * + * During resume we also only need to use one swap_map_page structure + * at a time. + */ + +#define MAP_PAGE_ENTRIES (PAGE_SIZE / sizeof(sector_t) - 1) + +struct swap_map_page { + sector_t entries[MAP_PAGE_ENTRIES]; + sector_t next_swap; +}; + +/** + * The swap_map_handle structure is used for handling swap in + * a file-alike way + */ + +struct swap_map_handle { + struct swap_map_page *cur; + sector_t cur_swap; + sector_t first_sector; + unsigned int k; +}; + struct swsusp_header { char reserved[PAGE_SIZE - 20 - sizeof(sector_t) - sizeof(int)]; sector_t image; @@ -145,110 +179,24 @@ int swsusp_swap_in_use(void) */ static unsigned short root_swap = 0xffff; -static struct block_device *resume_bdev; - -/** - * submit - submit BIO request. - * @rw: READ or WRITE. - * @off physical offset of page. - * @page: page we're reading or writing. - * @bio_chain: list of pending biod (for async reading) - * - * Straight from the textbook - allocate and initialize the bio. - * If we're reading, make sure the page is marked as dirty. - * Then submit it and, if @bio_chain == NULL, wait. - */ -static int submit(int rw, pgoff_t page_off, struct page *page, - struct bio **bio_chain) -{ - const int bio_rw = rw | (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG); - struct bio *bio; - - bio = bio_alloc(__GFP_WAIT | __GFP_HIGH, 1); - bio->bi_sector = page_off * (PAGE_SIZE >> 9); - bio->bi_bdev = resume_bdev; - bio->bi_end_io = end_swap_bio_read; - - if (bio_add_page(bio, page, PAGE_SIZE, 0) < PAGE_SIZE) { - printk(KERN_ERR "PM: Adding page to bio failed at %ld\n", - page_off); - bio_put(bio); - return -EFAULT; - } - - lock_page(page); - bio_get(bio); - - if (bio_chain == NULL) { - submit_bio(bio_rw, bio); - wait_on_page_locked(page); - if (rw == READ) - bio_set_pages_dirty(bio); - bio_put(bio); - } else { - if (rw == READ) - get_page(page); /* These pages are freed later */ - bio->bi_private = *bio_chain; - *bio_chain = bio; - submit_bio(bio_rw, bio); - } - return 0; -} - -static int bio_read_page(pgoff_t page_off, void *addr, struct bio **bio_chain) -{ - return submit(READ, page_off, virt_to_page(addr), bio_chain); -} - -static int bio_write_page(pgoff_t page_off, void *addr, struct bio **bio_chain) -{ - return submit(WRITE, page_off, virt_to_page(addr), bio_chain); -} - -static int wait_on_bio_chain(struct bio **bio_chain) -{ - struct bio *bio; - struct bio *next_bio; - int ret = 0; - - if (bio_chain == NULL) - return 0; - - bio = *bio_chain; - if (bio == NULL) - return 0; - while (bio) { - struct page *page; - - next_bio = bio->bi_private; - page = bio->bi_io_vec[0].bv_page; - wait_on_page_locked(page); - if (!PageUptodate(page) || PageError(page)) - ret = -EIO; - put_page(page); - bio_put(bio); - bio = next_bio; - } - *bio_chain = NULL; - return ret; -} +struct block_device *hib_resume_bdev; /* * Saving part */ -static int mark_swapfiles(sector_t start, unsigned int flags) +static int mark_swapfiles(struct swap_map_handle *handle, unsigned int flags) { int error; - bio_read_page(swsusp_resume_block, swsusp_header, NULL); + hib_bio_read_page(swsusp_resume_block, swsusp_header, NULL); if (!memcmp("SWAP-SPACE",swsusp_header->sig, 10) || !memcmp("SWAPSPACE2",swsusp_header->sig, 10)) { memcpy(swsusp_header->orig_sig,swsusp_header->sig, 10); memcpy(swsusp_header->sig,SWSUSP_SIG, 10); - swsusp_header->image = start; + swsusp_header->image = handle->first_sector; swsusp_header->flags = flags; - error = bio_write_page(swsusp_resume_block, + error = hib_bio_write_page(swsusp_resume_block, swsusp_header, NULL); } else { printk(KERN_ERR "PM: Swap header not found!\n"); @@ -260,25 +208,26 @@ static int mark_swapfiles(sector_t start, unsigned int flags) /** * swsusp_swap_check - check if the resume device is a swap device * and get its index (if so) + * + * This is called before saving image */ - -static int swsusp_swap_check(void) /* This is called before saving image */ +static int swsusp_swap_check(void) { int res; res = swap_type_of(swsusp_resume_device, swsusp_resume_block, - &resume_bdev); + &hib_resume_bdev); if (res < 0) return res; root_swap = res; - res = blkdev_get(resume_bdev, FMODE_WRITE); + res = blkdev_get(hib_resume_bdev, FMODE_WRITE); if (res) return res; - res = set_blocksize(resume_bdev, PAGE_SIZE); + res = set_blocksize(hib_resume_bdev, PAGE_SIZE); if (res < 0) - blkdev_put(resume_bdev, FMODE_WRITE); + blkdev_put(hib_resume_bdev, FMODE_WRITE); return res; } @@ -309,42 +258,9 @@ static int write_page(void *buf, sector_t offset, struct bio **bio_chain) } else { src = buf; } - return bio_write_page(offset, src, bio_chain); + return hib_bio_write_page(offset, src, bio_chain); } -/* - * The swap map is a data structure used for keeping track of each page - * written to a swap partition. It consists of many swap_map_page - * structures that contain each an array of MAP_PAGE_SIZE swap entries. - * These structures are stored on the swap and linked together with the - * help of the .next_swap member. - * - * The swap map is created during suspend. The swap map pages are - * allocated and populated one at a time, so we only need one memory - * page to set up the entire structure. - * - * During resume we also only need to use one swap_map_page structure - * at a time. - */ - -#define MAP_PAGE_ENTRIES (PAGE_SIZE / sizeof(sector_t) - 1) - -struct swap_map_page { - sector_t entries[MAP_PAGE_ENTRIES]; - sector_t next_swap; -}; - -/** - * The swap_map_handle structure is used for handling swap in - * a file-alike way - */ - -struct swap_map_handle { - struct swap_map_page *cur; - sector_t cur_swap; - unsigned int k; -}; - static void release_swap_writer(struct swap_map_handle *handle) { if (handle->cur) @@ -354,16 +270,33 @@ static void release_swap_writer(struct swap_map_handle *handle) static int get_swap_writer(struct swap_map_handle *handle) { + int ret; + + ret = swsusp_swap_check(); + if (ret) { + if (ret != -ENOSPC) + printk(KERN_ERR "PM: Cannot find swap device, try " + "swapon -a.\n"); + return ret; + } handle->cur = (struct swap_map_page *)get_zeroed_page(GFP_KERNEL); - if (!handle->cur) - return -ENOMEM; + if (!handle->cur) { + ret = -ENOMEM; + goto err_close; + } handle->cur_swap = alloc_swapdev_block(root_swap); if (!handle->cur_swap) { - release_swap_writer(handle); - return -ENOSPC; + ret = -ENOSPC; + goto err_rel; } handle->k = 0; + handle->first_sector = handle->cur_swap; return 0; +err_rel: + release_swap_writer(handle); +err_close: + swsusp_close(FMODE_WRITE); + return ret; } static int swap_write_page(struct swap_map_handle *handle, void *buf, @@ -380,7 +313,7 @@ static int swap_write_page(struct swap_map_handle *handle, void *buf, return error; handle->cur->entries[handle->k++] = offset; if (handle->k >= MAP_PAGE_ENTRIES) { - error = wait_on_bio_chain(bio_chain); + error = hib_wait_on_bio_chain(bio_chain); if (error) goto out; offset = alloc_swapdev_block(root_swap); @@ -406,6 +339,24 @@ static int flush_swap_writer(struct swap_map_handle *handle) return -EINVAL; } +static int swap_writer_finish(struct swap_map_handle *handle, + unsigned int flags, int error) +{ + if (!error) { + flush_swap_writer(handle); + printk(KERN_INFO "PM: S"); + error = mark_swapfiles(handle, flags); + printk("|\n"); + } + + if (error) + free_all_swap_pages(root_swap); + release_swap_writer(handle); + swsusp_close(FMODE_WRITE); + + return error; +} + /** * save_image - save the suspend image data */ @@ -431,7 +382,7 @@ static int save_image(struct swap_map_handle *handle, bio = NULL; do_gettimeofday(&start); while (1) { - ret = snapshot_read_next(snapshot, PAGE_SIZE); + ret = snapshot_read_next(snapshot); if (ret <= 0) break; ret = swap_write_page(handle, data_of(*snapshot), &bio); @@ -441,7 +392,7 @@ static int save_image(struct swap_map_handle *handle, printk(KERN_CONT "\b\b\b\b%3d%%", nr_pages / m); nr_pages++; } - err2 = wait_on_bio_chain(&bio); + err2 = hib_wait_on_bio_chain(&bio); do_gettimeofday(&stop); if (!ret) ret = err2; @@ -483,50 +434,34 @@ int swsusp_write(unsigned int flags) struct swap_map_handle handle; struct snapshot_handle snapshot; struct swsusp_info *header; + unsigned long pages; int error; - error = swsusp_swap_check(); + pages = snapshot_get_image_size(); + error = get_swap_writer(&handle); if (error) { - printk(KERN_ERR "PM: Cannot find swap device, try " - "swapon -a.\n"); + printk(KERN_ERR "PM: Cannot get swap writer\n"); return error; } + if (!enough_swap(pages)) { + printk(KERN_ERR "PM: Not enough free swap\n"); + error = -ENOSPC; + goto out_finish; + } memset(&snapshot, 0, sizeof(struct snapshot_handle)); - error = snapshot_read_next(&snapshot, PAGE_SIZE); + error = snapshot_read_next(&snapshot); if (error < PAGE_SIZE) { if (error >= 0) error = -EFAULT; - goto out; + goto out_finish; } header = (struct swsusp_info *)data_of(snapshot); - if (!enough_swap(header->pages)) { - printk(KERN_ERR "PM: Not enough free swap\n"); - error = -ENOSPC; - goto out; - } - error = get_swap_writer(&handle); - if (!error) { - sector_t start = handle.cur_swap; - - error = swap_write_page(&handle, header, NULL); - if (!error) - error = save_image(&handle, &snapshot, - header->pages - 1); - - if (!error) { - flush_swap_writer(&handle); - printk(KERN_INFO "PM: S"); - error = mark_swapfiles(start, flags); - printk("|\n"); - } - } - if (error) - free_all_swap_pages(root_swap); - - release_swap_writer(&handle); - out: - swsusp_close(FMODE_WRITE); + error = swap_write_page(&handle, header, NULL); + if (!error) + error = save_image(&handle, &snapshot, pages - 1); +out_finish: + error = swap_writer_finish(&handle, flags, error); return error; } @@ -542,18 +477,21 @@ static void release_swap_reader(struct swap_map_handle *handle) handle->cur = NULL; } -static int get_swap_reader(struct swap_map_handle *handle, sector_t start) +static int get_swap_reader(struct swap_map_handle *handle, + unsigned int *flags_p) { int error; - if (!start) + *flags_p = swsusp_header->flags; + + if (!swsusp_header->image) /* how can this happen? */ return -EINVAL; handle->cur = (struct swap_map_page *)get_zeroed_page(__GFP_WAIT | __GFP_HIGH); if (!handle->cur) return -ENOMEM; - error = bio_read_page(start, handle->cur, NULL); + error = hib_bio_read_page(swsusp_header->image, handle->cur, NULL); if (error) { release_swap_reader(handle); return error; @@ -573,21 +511,28 @@ static int swap_read_page(struct swap_map_handle *handle, void *buf, offset = handle->cur->entries[handle->k]; if (!offset) return -EFAULT; - error = bio_read_page(offset, buf, bio_chain); + error = hib_bio_read_page(offset, buf, bio_chain); if (error) return error; if (++handle->k >= MAP_PAGE_ENTRIES) { - error = wait_on_bio_chain(bio_chain); + error = hib_wait_on_bio_chain(bio_chain); handle->k = 0; offset = handle->cur->next_swap; if (!offset) release_swap_reader(handle); else if (!error) - error = bio_read_page(offset, handle->cur, NULL); + error = hib_bio_read_page(offset, handle->cur, NULL); } return error; } +static int swap_reader_finish(struct swap_map_handle *handle) +{ + release_swap_reader(handle); + + return 0; +} + /** * load_image - load the image using the swap map handle * @handle and the snapshot handle @snapshot @@ -615,21 +560,21 @@ static int load_image(struct swap_map_handle *handle, bio = NULL; do_gettimeofday(&start); for ( ; ; ) { - error = snapshot_write_next(snapshot, PAGE_SIZE); + error = snapshot_write_next(snapshot); if (error <= 0) break; error = swap_read_page(handle, data_of(*snapshot), &bio); if (error) break; if (snapshot->sync_read) - error = wait_on_bio_chain(&bio); + error = hib_wait_on_bio_chain(&bio); if (error) break; if (!(nr_pages % m)) printk("\b\b\b\b%3d%%", nr_pages / m); nr_pages++; } - err2 = wait_on_bio_chain(&bio); + err2 = hib_wait_on_bio_chain(&bio); do_gettimeofday(&stop); if (!error) error = err2; @@ -657,20 +602,20 @@ int swsusp_read(unsigned int *flags_p) struct snapshot_handle snapshot; struct swsusp_info *header; - *flags_p = swsusp_header->flags; - memset(&snapshot, 0, sizeof(struct snapshot_handle)); - error = snapshot_write_next(&snapshot, PAGE_SIZE); + error = snapshot_write_next(&snapshot); if (error < PAGE_SIZE) return error < 0 ? error : -EFAULT; header = (struct swsusp_info *)data_of(snapshot); - error = get_swap_reader(&handle, swsusp_header->image); + error = get_swap_reader(&handle, flags_p); + if (error) + goto end; if (!error) error = swap_read_page(&handle, header, NULL); if (!error) error = load_image(&handle, &snapshot, header->pages - 1); - release_swap_reader(&handle); - + swap_reader_finish(&handle); +end: if (!error) pr_debug("PM: Image successfully loaded\n"); else @@ -686,11 +631,11 @@ int swsusp_check(void) { int error; - resume_bdev = open_by_devnum(swsusp_resume_device, FMODE_READ); - if (!IS_ERR(resume_bdev)) { - set_blocksize(resume_bdev, PAGE_SIZE); + hib_resume_bdev = open_by_devnum(swsusp_resume_device, FMODE_READ); + if (!IS_ERR(hib_resume_bdev)) { + set_blocksize(hib_resume_bdev, PAGE_SIZE); memset(swsusp_header, 0, PAGE_SIZE); - error = bio_read_page(swsusp_resume_block, + error = hib_bio_read_page(swsusp_resume_block, swsusp_header, NULL); if (error) goto put; @@ -698,7 +643,7 @@ int swsusp_check(void) if (!memcmp(SWSUSP_SIG, swsusp_header->sig, 10)) { memcpy(swsusp_header->sig, swsusp_header->orig_sig, 10); /* Reset swap signature now */ - error = bio_write_page(swsusp_resume_block, + error = hib_bio_write_page(swsusp_resume_block, swsusp_header, NULL); } else { error = -EINVAL; @@ -706,11 +651,11 @@ int swsusp_check(void) put: if (error) - blkdev_put(resume_bdev, FMODE_READ); + blkdev_put(hib_resume_bdev, FMODE_READ); else pr_debug("PM: Signature found, resuming\n"); } else { - error = PTR_ERR(resume_bdev); + error = PTR_ERR(hib_resume_bdev); } if (error) @@ -725,12 +670,12 @@ put: void swsusp_close(fmode_t mode) { - if (IS_ERR(resume_bdev)) { + if (IS_ERR(hib_resume_bdev)) { pr_debug("PM: Image device not initialised\n"); return; } - blkdev_put(resume_bdev, mode); + blkdev_put(hib_resume_bdev, mode); } static int swsusp_header_init(void) diff --git a/kernel/power/user.c b/kernel/power/user.c index a8c96212bc1..e819e17877c 100644 --- a/kernel/power/user.c +++ b/kernel/power/user.c @@ -151,6 +151,7 @@ static ssize_t snapshot_read(struct file *filp, char __user *buf, { struct snapshot_data *data; ssize_t res; + loff_t pg_offp = *offp & ~PAGE_MASK; mutex_lock(&pm_mutex); @@ -159,14 +160,19 @@ static ssize_t snapshot_read(struct file *filp, char __user *buf, res = -ENODATA; goto Unlock; } - res = snapshot_read_next(&data->handle, count); - if (res > 0) { - if (copy_to_user(buf, data_of(data->handle), res)) - res = -EFAULT; - else - *offp = data->handle.offset; + if (!pg_offp) { /* on page boundary? */ + res = snapshot_read_next(&data->handle); + if (res <= 0) + goto Unlock; + } else { + res = PAGE_SIZE - pg_offp; } + res = simple_read_from_buffer(buf, count, &pg_offp, + data_of(data->handle), res); + if (res > 0) + *offp += res; + Unlock: mutex_unlock(&pm_mutex); @@ -178,18 +184,25 @@ static ssize_t snapshot_write(struct file *filp, const char __user *buf, { struct snapshot_data *data; ssize_t res; + loff_t pg_offp = *offp & ~PAGE_MASK; mutex_lock(&pm_mutex); data = filp->private_data; - res = snapshot_write_next(&data->handle, count); - if (res > 0) { - if (copy_from_user(data_of(data->handle), buf, res)) - res = -EFAULT; - else - *offp = data->handle.offset; + + if (!pg_offp) { + res = snapshot_write_next(&data->handle); + if (res <= 0) + goto unlock; + } else { + res = PAGE_SIZE - pg_offp; } + res = simple_write_to_buffer(data_of(data->handle), res, &pg_offp, + buf, count); + if (res > 0) + *offp += res; +unlock: mutex_unlock(&pm_mutex); return res; diff --git a/kernel/printk.c b/kernel/printk.c index 75077ad0b53..444b770c959 100644 --- a/kernel/printk.c +++ b/kernel/printk.c @@ -33,6 +33,7 @@ #include <linux/bootmem.h> #include <linux/syscalls.h> #include <linux/kexec.h> +#include <linux/kdb.h> #include <linux/ratelimit.h> #include <linux/kmsg_dump.h> #include <linux/syslog.h> @@ -413,6 +414,22 @@ SYSCALL_DEFINE3(syslog, int, type, char __user *, buf, int, len) return do_syslog(type, buf, len, SYSLOG_FROM_CALL); } +#ifdef CONFIG_KGDB_KDB +/* kdb dmesg command needs access to the syslog buffer. do_syslog() + * uses locks so it cannot be used during debugging. Just tell kdb + * where the start and end of the physical and logical logs are. This + * is equivalent to do_syslog(3). + */ +void kdb_syslog_data(char *syslog_data[4]) +{ + syslog_data[0] = log_buf; + syslog_data[1] = log_buf + log_buf_len; + syslog_data[2] = log_buf + log_end - + (logged_chars < log_buf_len ? logged_chars : log_buf_len); + syslog_data[3] = log_buf + log_end; +} +#endif /* CONFIG_KGDB_KDB */ + /* * Call the console drivers on a range of log_buf */ @@ -586,6 +603,14 @@ asmlinkage int printk(const char *fmt, ...) va_list args; int r; +#ifdef CONFIG_KGDB_KDB + if (unlikely(kdb_trap_printk)) { + va_start(args, fmt); + r = vkdb_printf(fmt, args); + va_end(args); + return r; + } +#endif va_start(args, fmt); r = vprintk(fmt, args); va_end(args); diff --git a/kernel/profile.c b/kernel/profile.c index dfadc5b729f..b22a899934c 100644 --- a/kernel/profile.c +++ b/kernel/profile.c @@ -365,14 +365,14 @@ static int __cpuinit profile_cpu_callback(struct notifier_block *info, switch (action) { case CPU_UP_PREPARE: case CPU_UP_PREPARE_FROZEN: - node = cpu_to_node(cpu); + node = cpu_to_mem(cpu); per_cpu(cpu_profile_flip, cpu) = 0; if (!per_cpu(cpu_profile_hits, cpu)[1]) { page = alloc_pages_exact_node(node, GFP_KERNEL | __GFP_ZERO, 0); if (!page) - return NOTIFY_BAD; + return notifier_from_errno(-ENOMEM); per_cpu(cpu_profile_hits, cpu)[1] = page_address(page); } if (!per_cpu(cpu_profile_hits, cpu)[0]) { @@ -388,7 +388,7 @@ out_free: page = virt_to_page(per_cpu(cpu_profile_hits, cpu)[1]); per_cpu(cpu_profile_hits, cpu)[1] = NULL; __free_page(page); - return NOTIFY_BAD; + return notifier_from_errno(-ENOMEM); case CPU_ONLINE: case CPU_ONLINE_FROZEN: if (prof_cpu_mask != NULL) @@ -567,7 +567,7 @@ static int create_hash_tables(void) int cpu; for_each_online_cpu(cpu) { - int node = cpu_to_node(cpu); + int node = cpu_to_mem(cpu); struct page *page; page = alloc_pages_exact_node(node, diff --git a/kernel/ptrace.c b/kernel/ptrace.c index 6af9cdd558b..74a3d693c19 100644 --- a/kernel/ptrace.c +++ b/kernel/ptrace.c @@ -594,6 +594,32 @@ int ptrace_request(struct task_struct *child, long request, ret = ptrace_detach(child, data); break; +#ifdef CONFIG_BINFMT_ELF_FDPIC + case PTRACE_GETFDPIC: { + struct mm_struct *mm = get_task_mm(child); + unsigned long tmp = 0; + + ret = -ESRCH; + if (!mm) + break; + + switch (addr) { + case PTRACE_GETFDPIC_EXEC: + tmp = mm->context.exec_fdpic_loadmap; + break; + case PTRACE_GETFDPIC_INTERP: + tmp = mm->context.interp_fdpic_loadmap; + break; + default: + break; + } + mmput(mm); + + ret = put_user(tmp, (unsigned long __user *) data); + break; + } +#endif + #ifdef PTRACE_SINGLESTEP case PTRACE_SINGLESTEP: #endif diff --git a/kernel/relay.c b/kernel/relay.c index 3d97f282161..c7cf397fb92 100644 --- a/kernel/relay.c +++ b/kernel/relay.c @@ -539,7 +539,7 @@ static int __cpuinit relay_hotcpu_callback(struct notifier_block *nb, "relay_hotcpu_callback: cpu %d buffer " "creation failed\n", hotcpu); mutex_unlock(&relay_channels_mutex); - return NOTIFY_BAD; + return notifier_from_errno(-ENOMEM); } } mutex_unlock(&relay_channels_mutex); @@ -1231,8 +1231,8 @@ static ssize_t subbuf_splice_actor(struct file *in, size_t read_subbuf = read_start / subbuf_size; size_t padding = rbuf->padding[read_subbuf]; size_t nonpad_end = read_subbuf * subbuf_size + subbuf_size - padding; - struct page *pages[PIPE_BUFFERS]; - struct partial_page partial[PIPE_BUFFERS]; + struct page *pages[PIPE_DEF_BUFFERS]; + struct partial_page partial[PIPE_DEF_BUFFERS]; struct splice_pipe_desc spd = { .pages = pages, .nr_pages = 0, @@ -1245,6 +1245,8 @@ static ssize_t subbuf_splice_actor(struct file *in, if (rbuf->subbufs_produced == rbuf->subbufs_consumed) return 0; + if (splice_grow_spd(pipe, &spd)) + return -ENOMEM; /* * Adjust read len, if longer than what is available @@ -1255,7 +1257,7 @@ static ssize_t subbuf_splice_actor(struct file *in, subbuf_pages = rbuf->chan->alloc_size >> PAGE_SHIFT; pidx = (read_start / PAGE_SIZE) % subbuf_pages; poff = read_start & ~PAGE_MASK; - nr_pages = min_t(unsigned int, subbuf_pages, PIPE_BUFFERS); + nr_pages = min_t(unsigned int, subbuf_pages, pipe->buffers); for (total_len = 0; spd.nr_pages < nr_pages; spd.nr_pages++) { unsigned int this_len, this_end, private; @@ -1289,16 +1291,19 @@ static ssize_t subbuf_splice_actor(struct file *in, } } + ret = 0; if (!spd.nr_pages) - return 0; + goto out; ret = *nonpad_ret = splice_to_pipe(pipe, &spd); if (ret < 0 || ret < total_len) - return ret; + goto out; if (read_start + ret == nonpad_end) ret += padding; +out: + splice_shrink_spd(pipe, &spd); return ret; } diff --git a/kernel/resource.c b/kernel/resource.c index 9c358e26353..7b36976e5de 100644 --- a/kernel/resource.c +++ b/kernel/resource.c @@ -15,6 +15,7 @@ #include <linux/spinlock.h> #include <linux/fs.h> #include <linux/proc_fs.h> +#include <linux/sched.h> #include <linux/seq_file.h> #include <linux/device.h> #include <linux/pfn.h> @@ -681,6 +682,8 @@ resource_size_t resource_alignment(struct resource *res) * release_region releases a matching busy region. */ +static DECLARE_WAIT_QUEUE_HEAD(muxed_resource_wait); + /** * __request_region - create a new busy resource region * @parent: parent resource descriptor @@ -693,6 +696,7 @@ struct resource * __request_region(struct resource *parent, resource_size_t start, resource_size_t n, const char *name, int flags) { + DECLARE_WAITQUEUE(wait, current); struct resource *res = kzalloc(sizeof(*res), GFP_KERNEL); if (!res) @@ -717,7 +721,15 @@ struct resource * __request_region(struct resource *parent, if (!(conflict->flags & IORESOURCE_BUSY)) continue; } - + if (conflict->flags & flags & IORESOURCE_MUXED) { + add_wait_queue(&muxed_resource_wait, &wait); + write_unlock(&resource_lock); + set_current_state(TASK_UNINTERRUPTIBLE); + schedule(); + remove_wait_queue(&muxed_resource_wait, &wait); + write_lock(&resource_lock); + continue; + } /* Uhhuh, that didn't work out.. */ kfree(res); res = NULL; @@ -791,6 +803,8 @@ void __release_region(struct resource *parent, resource_size_t start, break; *p = res->sibling; write_unlock(&resource_lock); + if (res->flags & IORESOURCE_MUXED) + wake_up(&muxed_resource_wait); kfree(res); return; } diff --git a/kernel/sched.c b/kernel/sched.c index 1d93cd0ae4d..15b93f617fd 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -969,14 +969,6 @@ static struct rq *task_rq_lock(struct task_struct *p, unsigned long *flags) } } -void task_rq_unlock_wait(struct task_struct *p) -{ - struct rq *rq = task_rq(p); - - smp_mb(); /* spin-unlock-wait is not a full memory barrier */ - raw_spin_unlock_wait(&rq->lock); -} - static void __task_rq_unlock(struct rq *rq) __releases(rq->lock) { @@ -3851,6 +3843,7 @@ void __wake_up_locked(wait_queue_head_t *q, unsigned int mode) { __wake_up_common(q, mode, 1, 0, NULL); } +EXPORT_SYMBOL_GPL(__wake_up_locked); void __wake_up_locked_key(wait_queue_head_t *q, unsigned int mode, void *key) { @@ -7758,9 +7751,9 @@ void normalize_rt_tasks(void) #endif /* CONFIG_MAGIC_SYSRQ */ -#ifdef CONFIG_IA64 +#if defined(CONFIG_IA64) || defined(CONFIG_KGDB_KDB) /* - * These functions are only useful for the IA64 MCA handling. + * These functions are only useful for the IA64 MCA handling, or kdb. * * They can only be called when the whole system has been * stopped - every CPU needs to be quiescent, and no scheduling @@ -7780,6 +7773,9 @@ struct task_struct *curr_task(int cpu) return cpu_curr(cpu); } +#endif /* defined(CONFIG_IA64) || defined(CONFIG_KGDB_KDB) */ + +#ifdef CONFIG_IA64 /** * set_curr_task - set the current task for a given cpu. * @cpu: the processor in question. diff --git a/kernel/sched_clock.c b/kernel/sched_clock.c index 5b496132c28..906a0f718cb 100644 --- a/kernel/sched_clock.c +++ b/kernel/sched_clock.c @@ -41,6 +41,7 @@ unsigned long long __attribute__((weak)) sched_clock(void) return (unsigned long long)(jiffies - INITIAL_JIFFIES) * (NSEC_PER_SEC / HZ); } +EXPORT_SYMBOL_GPL(sched_clock); static __read_mostly int sched_clock_running; diff --git a/kernel/sched_debug.c b/kernel/sched_debug.c index 87a330a7185..35565395d00 100644 --- a/kernel/sched_debug.c +++ b/kernel/sched_debug.c @@ -381,15 +381,9 @@ __initcall(init_sched_debug_procfs); void proc_sched_show_task(struct task_struct *p, struct seq_file *m) { unsigned long nr_switches; - unsigned long flags; - int num_threads = 1; - - if (lock_task_sighand(p, &flags)) { - num_threads = atomic_read(&p->signal->count); - unlock_task_sighand(p, &flags); - } - SEQ_printf(m, "%s (%d, #threads: %d)\n", p->comm, p->pid, num_threads); + SEQ_printf(m, "%s (%d, #threads: %d)\n", p->comm, p->pid, + get_nr_threads(p)); SEQ_printf(m, "---------------------------------------------------------\n"); #define __P(F) \ diff --git a/kernel/signal.c b/kernel/signal.c index dbd7fe073c5..906ae5a1779 100644 --- a/kernel/signal.c +++ b/kernel/signal.c @@ -642,7 +642,7 @@ static inline bool si_fromuser(const struct siginfo *info) static int check_kill_permission(int sig, struct siginfo *info, struct task_struct *t) { - const struct cred *cred = current_cred(), *tcred; + const struct cred *cred, *tcred; struct pid *sid; int error; @@ -656,8 +656,10 @@ static int check_kill_permission(int sig, struct siginfo *info, if (error) return error; + cred = current_cred(); tcred = __task_cred(t); - if ((cred->euid ^ tcred->suid) && + if (!same_thread_group(current, t) && + (cred->euid ^ tcred->suid) && (cred->euid ^ tcred->uid) && (cred->uid ^ tcred->suid) && (cred->uid ^ tcred->uid) && @@ -1083,23 +1085,24 @@ force_sig_info(int sig, struct siginfo *info, struct task_struct *t) /* * Nuke all other threads in the group. */ -void zap_other_threads(struct task_struct *p) +int zap_other_threads(struct task_struct *p) { - struct task_struct *t; + struct task_struct *t = p; + int count = 0; p->signal->group_stop_count = 0; - for (t = next_thread(p); t != p; t = next_thread(t)) { - /* - * Don't bother with already dead threads - */ + while_each_thread(p, t) { + count++; + + /* Don't bother with already dead threads */ if (t->exit_state) continue; - - /* SIGKILL will be handled before any pending SIGSTOP */ sigaddset(&t->pending.signal, SIGKILL); signal_wake_up(t, 1); } + + return count; } struct sighand_struct *lock_task_sighand(struct task_struct *tsk, unsigned long *flags) @@ -2735,3 +2738,43 @@ void __init signals_init(void) { sigqueue_cachep = KMEM_CACHE(sigqueue, SLAB_PANIC); } + +#ifdef CONFIG_KGDB_KDB +#include <linux/kdb.h> +/* + * kdb_send_sig_info - Allows kdb to send signals without exposing + * signal internals. This function checks if the required locks are + * available before calling the main signal code, to avoid kdb + * deadlocks. + */ +void +kdb_send_sig_info(struct task_struct *t, struct siginfo *info) +{ + static struct task_struct *kdb_prev_t; + int sig, new_t; + if (!spin_trylock(&t->sighand->siglock)) { + kdb_printf("Can't do kill command now.\n" + "The sigmask lock is held somewhere else in " + "kernel, try again later\n"); + return; + } + spin_unlock(&t->sighand->siglock); + new_t = kdb_prev_t != t; + kdb_prev_t = t; + if (t->state != TASK_RUNNING && new_t) { + kdb_printf("Process is not RUNNING, sending a signal from " + "kdb risks deadlock\n" + "on the run queue locks. " + "The signal has _not_ been sent.\n" + "Reissue the kill command if you want to risk " + "the deadlock.\n"); + return; + } + sig = info->si_signo; + if (send_sig_info(sig, info, t)) + kdb_printf("Fail to deliver Signal %d to process %d.\n", + sig, t->pid); + else + kdb_printf("Signal %d is sent to process %d.\n", sig, t->pid); +} +#endif /* CONFIG_KGDB_KDB */ diff --git a/kernel/smp.c b/kernel/smp.c index 3fc69733618..75c970c715d 100644 --- a/kernel/smp.c +++ b/kernel/smp.c @@ -52,7 +52,7 @@ hotplug_cfd(struct notifier_block *nfb, unsigned long action, void *hcpu) case CPU_UP_PREPARE_FROZEN: if (!zalloc_cpumask_var_node(&cfd->cpumask, GFP_KERNEL, cpu_to_node(cpu))) - return NOTIFY_BAD; + return notifier_from_errno(-ENOMEM); break; #ifdef CONFIG_HOTPLUG_CPU diff --git a/kernel/softirq.c b/kernel/softirq.c index 0db913a5c60..825e1126008 100644 --- a/kernel/softirq.c +++ b/kernel/softirq.c @@ -808,7 +808,7 @@ static int __cpuinit cpu_callback(struct notifier_block *nfb, p = kthread_create(run_ksoftirqd, hcpu, "ksoftirqd/%d", hotcpu); if (IS_ERR(p)) { printk("ksoftirqd for %i failed\n", hotcpu); - return NOTIFY_BAD; + return notifier_from_errno(PTR_ERR(p)); } kthread_bind(p, hotcpu); per_cpu(ksoftirqd, hotcpu) = p; diff --git a/kernel/sys.c b/kernel/sys.c index 7cb426a5896..e83ddbbaf89 100644 --- a/kernel/sys.c +++ b/kernel/sys.c @@ -492,10 +492,6 @@ SYSCALL_DEFINE2(setregid, gid_t, rgid, gid_t, egid) return -ENOMEM; old = current_cred(); - retval = security_task_setgid(rgid, egid, (gid_t)-1, LSM_SETID_RE); - if (retval) - goto error; - retval = -EPERM; if (rgid != (gid_t) -1) { if (old->gid == rgid || @@ -543,10 +539,6 @@ SYSCALL_DEFINE1(setgid, gid_t, gid) return -ENOMEM; old = current_cred(); - retval = security_task_setgid(gid, (gid_t)-1, (gid_t)-1, LSM_SETID_ID); - if (retval) - goto error; - retval = -EPERM; if (capable(CAP_SETGID)) new->gid = new->egid = new->sgid = new->fsgid = gid; @@ -610,10 +602,6 @@ SYSCALL_DEFINE2(setreuid, uid_t, ruid, uid_t, euid) return -ENOMEM; old = current_cred(); - retval = security_task_setuid(ruid, euid, (uid_t)-1, LSM_SETID_RE); - if (retval) - goto error; - retval = -EPERM; if (ruid != (uid_t) -1) { new->uid = ruid; @@ -675,10 +663,6 @@ SYSCALL_DEFINE1(setuid, uid_t, uid) return -ENOMEM; old = current_cred(); - retval = security_task_setuid(uid, (uid_t)-1, (uid_t)-1, LSM_SETID_ID); - if (retval) - goto error; - retval = -EPERM; if (capable(CAP_SETUID)) { new->suid = new->uid = uid; @@ -719,9 +703,6 @@ SYSCALL_DEFINE3(setresuid, uid_t, ruid, uid_t, euid, uid_t, suid) if (!new) return -ENOMEM; - retval = security_task_setuid(ruid, euid, suid, LSM_SETID_RES); - if (retval) - goto error; old = current_cred(); retval = -EPERM; @@ -788,10 +769,6 @@ SYSCALL_DEFINE3(setresgid, gid_t, rgid, gid_t, egid, gid_t, sgid) return -ENOMEM; old = current_cred(); - retval = security_task_setgid(rgid, egid, sgid, LSM_SETID_RES); - if (retval) - goto error; - retval = -EPERM; if (!capable(CAP_SETGID)) { if (rgid != (gid_t) -1 && rgid != old->gid && @@ -851,9 +828,6 @@ SYSCALL_DEFINE1(setfsuid, uid_t, uid) old = current_cred(); old_fsuid = old->fsuid; - if (security_task_setuid(uid, (uid_t)-1, (uid_t)-1, LSM_SETID_FS) < 0) - goto error; - if (uid == old->uid || uid == old->euid || uid == old->suid || uid == old->fsuid || capable(CAP_SETUID)) { @@ -864,7 +838,6 @@ SYSCALL_DEFINE1(setfsuid, uid_t, uid) } } -error: abort_creds(new); return old_fsuid; @@ -888,9 +861,6 @@ SYSCALL_DEFINE1(setfsgid, gid_t, gid) old = current_cred(); old_fsgid = old->fsgid; - if (security_task_setgid(gid, (gid_t)-1, (gid_t)-1, LSM_SETID_FS)) - goto error; - if (gid == old->gid || gid == old->egid || gid == old->sgid || gid == old->fsgid || capable(CAP_SETGID)) { @@ -900,7 +870,6 @@ SYSCALL_DEFINE1(setfsgid, gid_t, gid) } } -error: abort_creds(new); return old_fsgid; @@ -1663,9 +1632,9 @@ SYSCALL_DEFINE3(getcpu, unsigned __user *, cpup, unsigned __user *, nodep, char poweroff_cmd[POWEROFF_CMD_PATH_LEN] = "/sbin/poweroff"; -static void argv_cleanup(char **argv, char **envp) +static void argv_cleanup(struct subprocess_info *info) { - argv_free(argv); + argv_free(info->argv); } /** @@ -1699,7 +1668,7 @@ int orderly_poweroff(bool force) goto out; } - call_usermodehelper_setcleanup(info, argv_cleanup); + call_usermodehelper_setfns(info, NULL, argv_cleanup, NULL); ret = call_usermodehelper_exec(info, UMH_NO_WAIT); diff --git a/kernel/sysctl.c b/kernel/sysctl.c index 8686b0f5fc1..997080f00e0 100644 --- a/kernel/sysctl.c +++ b/kernel/sysctl.c @@ -37,6 +37,7 @@ #include <linux/highuid.h> #include <linux/writeback.h> #include <linux/ratelimit.h> +#include <linux/compaction.h> #include <linux/hugetlb.h> #include <linux/initrd.h> #include <linux/key.h> @@ -52,6 +53,7 @@ #include <linux/slow-work.h> #include <linux/perf_event.h> #include <linux/kprobes.h> +#include <linux/pipe_fs_i.h> #include <asm/uaccess.h> #include <asm/processor.h> @@ -163,6 +165,27 @@ static int proc_taint(struct ctl_table *table, int write, void __user *buffer, size_t *lenp, loff_t *ppos); #endif +#ifdef CONFIG_MAGIC_SYSRQ +static int __sysrq_enabled; /* Note: sysrq code ises it's own private copy */ + +static int sysrq_sysctl_handler(ctl_table *table, int write, + void __user *buffer, size_t *lenp, + loff_t *ppos) +{ + int error; + + error = proc_dointvec(table, write, buffer, lenp, ppos); + if (error) + return error; + + if (write) + sysrq_toggle_support(__sysrq_enabled); + + return 0; +} + +#endif + static struct ctl_table root_table[]; static struct ctl_table_root sysctl_table_root; static struct ctl_table_header root_table_header = { @@ -240,6 +263,11 @@ static int min_sched_shares_ratelimit = 100000; /* 100 usec */ static int max_sched_shares_ratelimit = NSEC_PER_SEC; /* 1 second */ #endif +#ifdef CONFIG_COMPACTION +static int min_extfrag_threshold; +static int max_extfrag_threshold = 1000; +#endif + static struct ctl_table kern_table[] = { { .procname = "sched_child_runs_first", @@ -567,7 +595,7 @@ static struct ctl_table kern_table[] = { .data = &__sysrq_enabled, .maxlen = sizeof (int), .mode = 0644, - .proc_handler = proc_dointvec, + .proc_handler = sysrq_sysctl_handler, }, #endif #ifdef CONFIG_PROC_SYSCTL @@ -621,7 +649,7 @@ static struct ctl_table kern_table[] = { #endif { .procname = "userprocess_debug", - .data = &sysctl_userprocess_debug, + .data = &show_unhandled_signals, .maxlen = sizeof(int), .mode = 0644, .proc_handler = proc_dointvec, @@ -1099,6 +1127,25 @@ static struct ctl_table vm_table[] = { .mode = 0644, .proc_handler = drop_caches_sysctl_handler, }, +#ifdef CONFIG_COMPACTION + { + .procname = "compact_memory", + .data = &sysctl_compact_memory, + .maxlen = sizeof(int), + .mode = 0200, + .proc_handler = sysctl_compaction_handler, + }, + { + .procname = "extfrag_threshold", + .data = &sysctl_extfrag_threshold, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = sysctl_extfrag_handler, + .extra1 = &min_extfrag_threshold, + .extra2 = &max_extfrag_threshold, + }, + +#endif /* CONFIG_COMPACTION */ { .procname = "min_free_kbytes", .data = &min_free_kbytes, @@ -1423,6 +1470,14 @@ static struct ctl_table fs_table[] = { .child = binfmt_misc_table, }, #endif + { + .procname = "pipe-max-pages", + .data = &pipe_max_pages, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &proc_dointvec_minmax, + .extra1 = &two, + }, /* * NOTE: do not add new entries to this table unless you have read * Documentation/sysctl/ctl_unnumbered.txt @@ -1431,7 +1486,8 @@ static struct ctl_table fs_table[] = { }; static struct ctl_table debug_table[] = { -#if defined(CONFIG_X86) || defined(CONFIG_PPC) || defined(CONFIG_SPARC) +#if defined(CONFIG_X86) || defined(CONFIG_PPC) || defined(CONFIG_SPARC) || \ + defined(CONFIG_S390) { .procname = "exception-trace", .data = &show_unhandled_signals, @@ -2040,8 +2096,132 @@ int proc_dostring(struct ctl_table *table, int write, buffer, lenp, ppos); } +static size_t proc_skip_spaces(char **buf) +{ + size_t ret; + char *tmp = skip_spaces(*buf); + ret = tmp - *buf; + *buf = tmp; + return ret; +} + +static void proc_skip_char(char **buf, size_t *size, const char v) +{ + while (*size) { + if (**buf != v) + break; + (*size)--; + (*buf)++; + } +} + +#define TMPBUFLEN 22 +/** + * proc_get_long - reads an ASCII formatted integer from a user buffer + * + * @buf: a kernel buffer + * @size: size of the kernel buffer + * @val: this is where the number will be stored + * @neg: set to %TRUE if number is negative + * @perm_tr: a vector which contains the allowed trailers + * @perm_tr_len: size of the perm_tr vector + * @tr: pointer to store the trailer character + * + * In case of success %0 is returned and @buf and @size are updated with + * the amount of bytes read. If @tr is non-NULL and a trailing + * character exists (size is non-zero after returning from this + * function), @tr is updated with the trailing character. + */ +static int proc_get_long(char **buf, size_t *size, + unsigned long *val, bool *neg, + const char *perm_tr, unsigned perm_tr_len, char *tr) +{ + int len; + char *p, tmp[TMPBUFLEN]; + + if (!*size) + return -EINVAL; + + len = *size; + if (len > TMPBUFLEN - 1) + len = TMPBUFLEN - 1; + + memcpy(tmp, *buf, len); + + tmp[len] = 0; + p = tmp; + if (*p == '-' && *size > 1) { + *neg = true; + p++; + } else + *neg = false; + if (!isdigit(*p)) + return -EINVAL; + + *val = simple_strtoul(p, &p, 0); + + len = p - tmp; + + /* We don't know if the next char is whitespace thus we may accept + * invalid integers (e.g. 1234...a) or two integers instead of one + * (e.g. 123...1). So lets not allow such large numbers. */ + if (len == TMPBUFLEN - 1) + return -EINVAL; + + if (len < *size && perm_tr_len && !memchr(perm_tr, *p, perm_tr_len)) + return -EINVAL; + + if (tr && (len < *size)) + *tr = *p; + + *buf += len; + *size -= len; + + return 0; +} + +/** + * proc_put_long - converts an integer to a decimal ASCII formatted string + * + * @buf: the user buffer + * @size: the size of the user buffer + * @val: the integer to be converted + * @neg: sign of the number, %TRUE for negative + * + * In case of success %0 is returned and @buf and @size are updated with + * the amount of bytes written. + */ +static int proc_put_long(void __user **buf, size_t *size, unsigned long val, + bool neg) +{ + int len; + char tmp[TMPBUFLEN], *p = tmp; + + sprintf(p, "%s%lu", neg ? "-" : "", val); + len = strlen(tmp); + if (len > *size) + len = *size; + if (copy_to_user(*buf, tmp, len)) + return -EFAULT; + *size -= len; + *buf += len; + return 0; +} +#undef TMPBUFLEN + +static int proc_put_char(void __user **buf, size_t *size, char c) +{ + if (*size) { + char __user **buffer = (char __user **)buf; + if (put_user(c, *buffer)) + return -EFAULT; + (*size)--, (*buffer)++; + *buf = *buffer; + } + return 0; +} -static int do_proc_dointvec_conv(int *negp, unsigned long *lvalp, +static int do_proc_dointvec_conv(bool *negp, unsigned long *lvalp, int *valp, int write, void *data) { @@ -2050,33 +2230,31 @@ static int do_proc_dointvec_conv(int *negp, unsigned long *lvalp, } else { int val = *valp; if (val < 0) { - *negp = -1; + *negp = true; *lvalp = (unsigned long)-val; } else { - *negp = 0; + *negp = false; *lvalp = (unsigned long)val; } } return 0; } +static const char proc_wspace_sep[] = { ' ', '\t', '\n' }; + static int __do_proc_dointvec(void *tbl_data, struct ctl_table *table, int write, void __user *buffer, size_t *lenp, loff_t *ppos, - int (*conv)(int *negp, unsigned long *lvalp, int *valp, + int (*conv)(bool *negp, unsigned long *lvalp, int *valp, int write, void *data), void *data) { -#define TMPBUFLEN 21 - int *i, vleft, first = 1, neg; - unsigned long lval; - size_t left, len; + int *i, vleft, first = 1, err = 0; + unsigned long page = 0; + size_t left; + char *kbuf; - char buf[TMPBUFLEN], *p; - char __user *s = buffer; - - if (!tbl_data || !table->maxlen || !*lenp || - (*ppos && !write)) { + if (!tbl_data || !table->maxlen || !*lenp || (*ppos && !write)) { *lenp = 0; return 0; } @@ -2088,89 +2266,71 @@ static int __do_proc_dointvec(void *tbl_data, struct ctl_table *table, if (!conv) conv = do_proc_dointvec_conv; + if (write) { + if (left > PAGE_SIZE - 1) + left = PAGE_SIZE - 1; + page = __get_free_page(GFP_TEMPORARY); + kbuf = (char *) page; + if (!kbuf) + return -ENOMEM; + if (copy_from_user(kbuf, buffer, left)) { + err = -EFAULT; + goto free; + } + kbuf[left] = 0; + } + for (; left && vleft--; i++, first=0) { + unsigned long lval; + bool neg; + if (write) { - while (left) { - char c; - if (get_user(c, s)) - return -EFAULT; - if (!isspace(c)) - break; - left--; - s++; - } + left -= proc_skip_spaces(&kbuf); + if (!left) break; - neg = 0; - len = left; - if (len > sizeof(buf) - 1) - len = sizeof(buf) - 1; - if (copy_from_user(buf, s, len)) - return -EFAULT; - buf[len] = 0; - p = buf; - if (*p == '-' && left > 1) { - neg = 1; - p++; - } - if (*p < '0' || *p > '9') + err = proc_get_long(&kbuf, &left, &lval, &neg, + proc_wspace_sep, + sizeof(proc_wspace_sep), NULL); + if (err) break; - - lval = simple_strtoul(p, &p, 0); - - len = p-buf; - if ((len < left) && *p && !isspace(*p)) - break; - s += len; - left -= len; - - if (conv(&neg, &lval, i, 1, data)) + if (conv(&neg, &lval, i, 1, data)) { + err = -EINVAL; break; + } } else { - p = buf; + if (conv(&neg, &lval, i, 0, data)) { + err = -EINVAL; + break; + } if (!first) - *p++ = '\t'; - - if (conv(&neg, &lval, i, 0, data)) + err = proc_put_char(&buffer, &left, '\t'); + if (err) + break; + err = proc_put_long(&buffer, &left, lval, neg); + if (err) break; - - sprintf(p, "%s%lu", neg ? "-" : "", lval); - len = strlen(buf); - if (len > left) - len = left; - if(copy_to_user(s, buf, len)) - return -EFAULT; - left -= len; - s += len; } } - if (!write && !first && left) { - if(put_user('\n', s)) - return -EFAULT; - left--, s++; - } + if (!write && !first && left && !err) + err = proc_put_char(&buffer, &left, '\n'); + if (write && !err && left) + left -= proc_skip_spaces(&kbuf); +free: if (write) { - while (left) { - char c; - if (get_user(c, s++)) - return -EFAULT; - if (!isspace(c)) - break; - left--; - } + free_page(page); + if (first) + return err ? : -EINVAL; } - if (write && first) - return -EINVAL; *lenp -= left; *ppos += *lenp; - return 0; -#undef TMPBUFLEN + return err; } static int do_proc_dointvec(struct ctl_table *table, int write, void __user *buffer, size_t *lenp, loff_t *ppos, - int (*conv)(int *negp, unsigned long *lvalp, int *valp, + int (*conv)(bool *negp, unsigned long *lvalp, int *valp, int write, void *data), void *data) { @@ -2238,8 +2398,8 @@ struct do_proc_dointvec_minmax_conv_param { int *max; }; -static int do_proc_dointvec_minmax_conv(int *negp, unsigned long *lvalp, - int *valp, +static int do_proc_dointvec_minmax_conv(bool *negp, unsigned long *lvalp, + int *valp, int write, void *data) { struct do_proc_dointvec_minmax_conv_param *param = data; @@ -2252,10 +2412,10 @@ static int do_proc_dointvec_minmax_conv(int *negp, unsigned long *lvalp, } else { int val = *valp; if (val < 0) { - *negp = -1; + *negp = true; *lvalp = (unsigned long)-val; } else { - *negp = 0; + *negp = false; *lvalp = (unsigned long)val; } } @@ -2295,102 +2455,78 @@ static int __do_proc_doulongvec_minmax(void *data, struct ctl_table *table, int unsigned long convmul, unsigned long convdiv) { -#define TMPBUFLEN 21 - unsigned long *i, *min, *max, val; - int vleft, first=1, neg; - size_t len, left; - char buf[TMPBUFLEN], *p; - char __user *s = buffer; - - if (!data || !table->maxlen || !*lenp || - (*ppos && !write)) { + unsigned long *i, *min, *max; + int vleft, first = 1, err = 0; + unsigned long page = 0; + size_t left; + char *kbuf; + + if (!data || !table->maxlen || !*lenp || (*ppos && !write)) { *lenp = 0; return 0; } - + i = (unsigned long *) data; min = (unsigned long *) table->extra1; max = (unsigned long *) table->extra2; vleft = table->maxlen / sizeof(unsigned long); left = *lenp; - + + if (write) { + if (left > PAGE_SIZE - 1) + left = PAGE_SIZE - 1; + page = __get_free_page(GFP_TEMPORARY); + kbuf = (char *) page; + if (!kbuf) + return -ENOMEM; + if (copy_from_user(kbuf, buffer, left)) { + err = -EFAULT; + goto free; + } + kbuf[left] = 0; + } + for (; left && vleft--; i++, min++, max++, first=0) { + unsigned long val; + if (write) { - while (left) { - char c; - if (get_user(c, s)) - return -EFAULT; - if (!isspace(c)) - break; - left--; - s++; - } - if (!left) - break; - neg = 0; - len = left; - if (len > TMPBUFLEN-1) - len = TMPBUFLEN-1; - if (copy_from_user(buf, s, len)) - return -EFAULT; - buf[len] = 0; - p = buf; - if (*p == '-' && left > 1) { - neg = 1; - p++; - } - if (*p < '0' || *p > '9') - break; - val = simple_strtoul(p, &p, 0) * convmul / convdiv ; - len = p-buf; - if ((len < left) && *p && !isspace(*p)) + bool neg; + + left -= proc_skip_spaces(&kbuf); + + err = proc_get_long(&kbuf, &left, &val, &neg, + proc_wspace_sep, + sizeof(proc_wspace_sep), NULL); + if (err) break; if (neg) - val = -val; - s += len; - left -= len; - - if(neg) continue; if ((min && val < *min) || (max && val > *max)) continue; *i = val; } else { - p = buf; + val = convdiv * (*i) / convmul; if (!first) - *p++ = '\t'; - sprintf(p, "%lu", convdiv * (*i) / convmul); - len = strlen(buf); - if (len > left) - len = left; - if(copy_to_user(s, buf, len)) - return -EFAULT; - left -= len; - s += len; + err = proc_put_char(&buffer, &left, '\t'); + err = proc_put_long(&buffer, &left, val, false); + if (err) + break; } } - if (!write && !first && left) { - if(put_user('\n', s)) - return -EFAULT; - left--, s++; - } + if (!write && !first && left && !err) + err = proc_put_char(&buffer, &left, '\n'); + if (write && !err) + left -= proc_skip_spaces(&kbuf); +free: if (write) { - while (left) { - char c; - if (get_user(c, s++)) - return -EFAULT; - if (!isspace(c)) - break; - left--; - } + free_page(page); + if (first) + return err ? : -EINVAL; } - if (write && first) - return -EINVAL; *lenp -= left; *ppos += *lenp; - return 0; -#undef TMPBUFLEN + return err; } static int do_proc_doulongvec_minmax(struct ctl_table *table, int write, @@ -2451,7 +2587,7 @@ int proc_doulongvec_ms_jiffies_minmax(struct ctl_table *table, int write, } -static int do_proc_dointvec_jiffies_conv(int *negp, unsigned long *lvalp, +static int do_proc_dointvec_jiffies_conv(bool *negp, unsigned long *lvalp, int *valp, int write, void *data) { @@ -2463,10 +2599,10 @@ static int do_proc_dointvec_jiffies_conv(int *negp, unsigned long *lvalp, int val = *valp; unsigned long lval; if (val < 0) { - *negp = -1; + *negp = true; lval = (unsigned long)-val; } else { - *negp = 0; + *negp = false; lval = (unsigned long)val; } *lvalp = lval / HZ; @@ -2474,7 +2610,7 @@ static int do_proc_dointvec_jiffies_conv(int *negp, unsigned long *lvalp, return 0; } -static int do_proc_dointvec_userhz_jiffies_conv(int *negp, unsigned long *lvalp, +static int do_proc_dointvec_userhz_jiffies_conv(bool *negp, unsigned long *lvalp, int *valp, int write, void *data) { @@ -2486,10 +2622,10 @@ static int do_proc_dointvec_userhz_jiffies_conv(int *negp, unsigned long *lvalp, int val = *valp; unsigned long lval; if (val < 0) { - *negp = -1; + *negp = true; lval = (unsigned long)-val; } else { - *negp = 0; + *negp = false; lval = (unsigned long)val; } *lvalp = jiffies_to_clock_t(lval); @@ -2497,7 +2633,7 @@ static int do_proc_dointvec_userhz_jiffies_conv(int *negp, unsigned long *lvalp, return 0; } -static int do_proc_dointvec_ms_jiffies_conv(int *negp, unsigned long *lvalp, +static int do_proc_dointvec_ms_jiffies_conv(bool *negp, unsigned long *lvalp, int *valp, int write, void *data) { @@ -2507,10 +2643,10 @@ static int do_proc_dointvec_ms_jiffies_conv(int *negp, unsigned long *lvalp, int val = *valp; unsigned long lval; if (val < 0) { - *negp = -1; + *negp = true; lval = (unsigned long)-val; } else { - *negp = 0; + *negp = false; lval = (unsigned long)val; } *lvalp = jiffies_to_msecs(lval); @@ -2607,6 +2743,157 @@ static int proc_do_cad_pid(struct ctl_table *table, int write, return 0; } +/** + * proc_do_large_bitmap - read/write from/to a large bitmap + * @table: the sysctl table + * @write: %TRUE if this is a write to the sysctl file + * @buffer: the user buffer + * @lenp: the size of the user buffer + * @ppos: file position + * + * The bitmap is stored at table->data and the bitmap length (in bits) + * in table->maxlen. + * + * We use a range comma separated format (e.g. 1,3-4,10-10) so that + * large bitmaps may be represented in a compact manner. Writing into + * the file will clear the bitmap then update it with the given input. + * + * Returns 0 on success. + */ +int proc_do_large_bitmap(struct ctl_table *table, int write, + void __user *buffer, size_t *lenp, loff_t *ppos) +{ + int err = 0; + bool first = 1; + size_t left = *lenp; + unsigned long bitmap_len = table->maxlen; + unsigned long *bitmap = (unsigned long *) table->data; + unsigned long *tmp_bitmap = NULL; + char tr_a[] = { '-', ',', '\n' }, tr_b[] = { ',', '\n', 0 }, c; + + if (!bitmap_len || !left || (*ppos && !write)) { + *lenp = 0; + return 0; + } + + if (write) { + unsigned long page = 0; + char *kbuf; + + if (left > PAGE_SIZE - 1) + left = PAGE_SIZE - 1; + + page = __get_free_page(GFP_TEMPORARY); + kbuf = (char *) page; + if (!kbuf) + return -ENOMEM; + if (copy_from_user(kbuf, buffer, left)) { + free_page(page); + return -EFAULT; + } + kbuf[left] = 0; + + tmp_bitmap = kzalloc(BITS_TO_LONGS(bitmap_len) * sizeof(unsigned long), + GFP_KERNEL); + if (!tmp_bitmap) { + free_page(page); + return -ENOMEM; + } + proc_skip_char(&kbuf, &left, '\n'); + while (!err && left) { + unsigned long val_a, val_b; + bool neg; + + err = proc_get_long(&kbuf, &left, &val_a, &neg, tr_a, + sizeof(tr_a), &c); + if (err) + break; + if (val_a >= bitmap_len || neg) { + err = -EINVAL; + break; + } + + val_b = val_a; + if (left) { + kbuf++; + left--; + } + + if (c == '-') { + err = proc_get_long(&kbuf, &left, &val_b, + &neg, tr_b, sizeof(tr_b), + &c); + if (err) + break; + if (val_b >= bitmap_len || neg || + val_a > val_b) { + err = -EINVAL; + break; + } + if (left) { + kbuf++; + left--; + } + } + + while (val_a <= val_b) + set_bit(val_a++, tmp_bitmap); + + first = 0; + proc_skip_char(&kbuf, &left, '\n'); + } + free_page(page); + } else { + unsigned long bit_a, bit_b = 0; + + while (left) { + bit_a = find_next_bit(bitmap, bitmap_len, bit_b); + if (bit_a >= bitmap_len) + break; + bit_b = find_next_zero_bit(bitmap, bitmap_len, + bit_a + 1) - 1; + + if (!first) { + err = proc_put_char(&buffer, &left, ','); + if (err) + break; + } + err = proc_put_long(&buffer, &left, bit_a, false); + if (err) + break; + if (bit_a != bit_b) { + err = proc_put_char(&buffer, &left, '-'); + if (err) + break; + err = proc_put_long(&buffer, &left, bit_b, false); + if (err) + break; + } + + first = 0; bit_b++; + } + if (!err) + err = proc_put_char(&buffer, &left, '\n'); + } + + if (!err) { + if (write) { + if (*ppos) + bitmap_or(bitmap, bitmap, tmp_bitmap, bitmap_len); + else + memcpy(bitmap, tmp_bitmap, + BITS_TO_LONGS(bitmap_len) * sizeof(unsigned long)); + } + kfree(tmp_bitmap); + *lenp -= left; + *ppos += *lenp; + return 0; + } else { + kfree(tmp_bitmap); + return err; + } +} + #else /* CONFIG_PROC_FS */ int proc_dostring(struct ctl_table *table, int write, diff --git a/kernel/sysctl_binary.c b/kernel/sysctl_binary.c index 59030570f5c..1357c578606 100644 --- a/kernel/sysctl_binary.c +++ b/kernel/sysctl_binary.c @@ -13,6 +13,7 @@ #include <linux/file.h> #include <linux/ctype.h> #include <linux/netdevice.h> +#include <linux/kernel.h> #include <linux/slab.h> #ifdef CONFIG_SYSCTL_SYSCALL @@ -224,7 +225,6 @@ static const struct bin_table bin_net_ipv4_route_table[] = { { CTL_INT, NET_IPV4_ROUTE_MTU_EXPIRES, "mtu_expires" }, { CTL_INT, NET_IPV4_ROUTE_MIN_PMTU, "min_pmtu" }, { CTL_INT, NET_IPV4_ROUTE_MIN_ADVMSS, "min_adv_mss" }, - { CTL_INT, NET_IPV4_ROUTE_SECRET_INTERVAL, "secret_interval" }, {} }; @@ -1125,11 +1125,6 @@ out: return result; } -static unsigned hex_value(int ch) -{ - return isdigit(ch) ? ch - '0' : ((ch | 0x20) - 'a') + 10; -} - static ssize_t bin_uuid(struct file *file, void __user *oldval, size_t oldlen, void __user *newval, size_t newlen) { @@ -1157,7 +1152,8 @@ static ssize_t bin_uuid(struct file *file, if (!isxdigit(str[0]) || !isxdigit(str[1])) goto out; - uuid[i] = (hex_value(str[0]) << 4) | hex_value(str[1]); + uuid[i] = (hex_to_bin(str[0]) << 4) | + hex_to_bin(str[1]); str += 2; if (*str == '-') str++; diff --git a/kernel/time.c b/kernel/time.c index 656dccfe1cb..848b1c2ab09 100644 --- a/kernel/time.c +++ b/kernel/time.c @@ -132,12 +132,11 @@ SYSCALL_DEFINE2(gettimeofday, struct timeval __user *, tv, */ static inline void warp_clock(void) { - write_seqlock_irq(&xtime_lock); - wall_to_monotonic.tv_sec -= sys_tz.tz_minuteswest * 60; - xtime.tv_sec += sys_tz.tz_minuteswest * 60; - update_xtime_cache(0); - write_sequnlock_irq(&xtime_lock); - clock_was_set(); + struct timespec adjust; + + adjust = current_kernel_time(); + adjust.tv_sec += sys_tz.tz_minuteswest * 60; + do_settimeofday(&adjust); } /* diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c index 1f5dde63745..f08e99c1d56 100644 --- a/kernel/time/clocksource.c +++ b/kernel/time/clocksource.c @@ -625,6 +625,54 @@ static void clocksource_enqueue(struct clocksource *cs) list_add(&cs->list, entry); } + +/* + * Maximum time we expect to go between ticks. This includes idle + * tickless time. It provides the trade off between selecting a + * mult/shift pair that is very precise but can only handle a short + * period of time, vs. a mult/shift pair that can handle long periods + * of time but isn't as precise. + * + * This is a subsystem constant, and actual hardware limitations + * may override it (ie: clocksources that wrap every 3 seconds). + */ +#define MAX_UPDATE_LENGTH 5 /* Seconds */ + +/** + * __clocksource_register_scale - Used to install new clocksources + * @t: clocksource to be registered + * @scale: Scale factor multiplied against freq to get clocksource hz + * @freq: clocksource frequency (cycles per second) divided by scale + * + * Returns -EBUSY if registration fails, zero otherwise. + * + * This *SHOULD NOT* be called directly! Please use the + * clocksource_register_hz() or clocksource_register_khz helper functions. + */ +int __clocksource_register_scale(struct clocksource *cs, u32 scale, u32 freq) +{ + + /* + * Ideally we want to use some of the limits used in + * clocksource_max_deferment, to provide a more informed + * MAX_UPDATE_LENGTH. But for now this just gets the + * register interface working properly. + */ + clocks_calc_mult_shift(&cs->mult, &cs->shift, freq, + NSEC_PER_SEC/scale, + MAX_UPDATE_LENGTH*scale); + cs->max_idle_ns = clocksource_max_deferment(cs); + + mutex_lock(&clocksource_mutex); + clocksource_enqueue(cs); + clocksource_select(); + clocksource_enqueue_watchdog(cs); + mutex_unlock(&clocksource_mutex); + return 0; +} +EXPORT_SYMBOL_GPL(__clocksource_register_scale); + + /** * clocksource_register - Used to install new clocksources * @t: clocksource to be registered diff --git a/kernel/time/ntp.c b/kernel/time/ntp.c index 7c0f180d6e9..c63116863a8 100644 --- a/kernel/time/ntp.c +++ b/kernel/time/ntp.c @@ -69,7 +69,7 @@ static s64 time_freq; /* time at last adjustment (secs): */ static long time_reftime; -long time_adjust; +static long time_adjust; /* constant (boot-param configurable) NTP tick adjustment (upscaled) */ static s64 ntp_tick_adj; diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index 39f6177fafa..caf8d4d4f5c 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -165,13 +165,6 @@ struct timespec raw_time; /* flag for if timekeeping is suspended */ int __read_mostly timekeeping_suspended; -static struct timespec xtime_cache __attribute__ ((aligned (16))); -void update_xtime_cache(u64 nsec) -{ - xtime_cache = xtime; - timespec_add_ns(&xtime_cache, nsec); -} - /* must hold xtime_lock */ void timekeeping_leap_insert(int leapsecond) { @@ -332,8 +325,6 @@ int do_settimeofday(struct timespec *tv) xtime = *tv; - update_xtime_cache(0); - timekeeper.ntp_error = 0; ntp_clear(); @@ -559,7 +550,6 @@ void __init timekeeping_init(void) } set_normalized_timespec(&wall_to_monotonic, -boot.tv_sec, -boot.tv_nsec); - update_xtime_cache(0); total_sleep_time.tv_sec = 0; total_sleep_time.tv_nsec = 0; write_sequnlock_irqrestore(&xtime_lock, flags); @@ -593,7 +583,6 @@ static int timekeeping_resume(struct sys_device *dev) wall_to_monotonic = timespec_sub(wall_to_monotonic, ts); total_sleep_time = timespec_add_safe(total_sleep_time, ts); } - update_xtime_cache(0); /* re-base the last cycle value */ timekeeper.clock->cycle_last = timekeeper.clock->read(timekeeper.clock); timekeeper.ntp_error = 0; @@ -788,7 +777,6 @@ void update_wall_time(void) { struct clocksource *clock; cycle_t offset; - u64 nsecs; int shift = 0, maxshift; /* Make sure we're fully resumed: */ @@ -847,7 +835,9 @@ void update_wall_time(void) timekeeper.ntp_error += neg << timekeeper.ntp_error_shift; } - /* store full nanoseconds into xtime after rounding it up and + + /* + * Store full nanoseconds into xtime after rounding it up and * add the remainder to the error difference. */ xtime.tv_nsec = ((s64) timekeeper.xtime_nsec >> timekeeper.shift) + 1; @@ -855,8 +845,15 @@ void update_wall_time(void) timekeeper.ntp_error += timekeeper.xtime_nsec << timekeeper.ntp_error_shift; - nsecs = clocksource_cyc2ns(offset, timekeeper.mult, timekeeper.shift); - update_xtime_cache(nsecs); + /* + * Finally, make sure that after the rounding + * xtime.tv_nsec isn't larger then NSEC_PER_SEC + */ + if (unlikely(xtime.tv_nsec >= NSEC_PER_SEC)) { + xtime.tv_nsec -= NSEC_PER_SEC; + xtime.tv_sec++; + second_overflow(); + } /* check to see if there is a new clocksource to use */ update_vsyscall(&xtime, timekeeper.clock, timekeeper.mult); @@ -896,13 +893,13 @@ EXPORT_SYMBOL_GPL(monotonic_to_bootbased); unsigned long get_seconds(void) { - return xtime_cache.tv_sec; + return xtime.tv_sec; } EXPORT_SYMBOL(get_seconds); struct timespec __current_kernel_time(void) { - return xtime_cache; + return xtime; } struct timespec current_kernel_time(void) @@ -913,7 +910,7 @@ struct timespec current_kernel_time(void) do { seq = read_seqbegin(&xtime_lock); - now = xtime_cache; + now = xtime; } while (read_seqretry(&xtime_lock, seq)); return now; @@ -928,7 +925,7 @@ struct timespec get_monotonic_coarse(void) do { seq = read_seqbegin(&xtime_lock); - now = xtime_cache; + now = xtime; mono = wall_to_monotonic; } while (read_seqretry(&xtime_lock, seq)); diff --git a/kernel/timer.c b/kernel/timer.c index aeb6a54f277..e3b8c697bde 100644 --- a/kernel/timer.c +++ b/kernel/timer.c @@ -319,6 +319,24 @@ unsigned long round_jiffies_up_relative(unsigned long j) } EXPORT_SYMBOL_GPL(round_jiffies_up_relative); +/** + * set_timer_slack - set the allowed slack for a timer + * @slack_hz: the amount of time (in jiffies) allowed for rounding + * + * Set the amount of time, in jiffies, that a certain timer has + * in terms of slack. By setting this value, the timer subsystem + * will schedule the actual timer somewhere between + * the time mod_timer() asks for, and that time plus the slack. + * + * By setting the slack to -1, a percentage of the delay is used + * instead. + */ +void set_timer_slack(struct timer_list *timer, int slack_hz) +{ + timer->slack = slack_hz; +} +EXPORT_SYMBOL_GPL(set_timer_slack); + static inline void set_running_timer(struct tvec_base *base, struct timer_list *timer) @@ -550,6 +568,7 @@ static void __init_timer(struct timer_list *timer, { timer->entry.next = NULL; timer->base = __raw_get_cpu_var(tvec_bases); + timer->slack = -1; #ifdef CONFIG_TIMER_STATS timer->start_site = NULL; timer->start_pid = -1; @@ -715,6 +734,42 @@ int mod_timer_pending(struct timer_list *timer, unsigned long expires) } EXPORT_SYMBOL(mod_timer_pending); +/* + * Decide where to put the timer while taking the slack into account + * + * Algorithm: + * 1) calculate the maximum (absolute) time + * 2) calculate the highest bit where the expires and new max are different + * 3) use this bit to make a mask + * 4) use the bitmask to round down the maximum time, so that all last + * bits are zeros + */ +static inline +unsigned long apply_slack(struct timer_list *timer, unsigned long expires) +{ + unsigned long expires_limit, mask; + int bit; + + expires_limit = expires; + + if (timer->slack > -1) + expires_limit = expires + timer->slack; + else if (time_after(expires, jiffies)) /* auto slack: use 0.4% */ + expires_limit = expires + (expires - jiffies)/256; + + mask = expires ^ expires_limit; + if (mask == 0) + return expires; + + bit = find_last_bit(&mask, BITS_PER_LONG); + + mask = (1 << bit) - 1; + + expires_limit = expires_limit & ~(mask); + + return expires_limit; +} + /** * mod_timer - modify a timer's timeout * @timer: the timer to be modified @@ -745,6 +800,8 @@ int mod_timer(struct timer_list *timer, unsigned long expires) if (timer_pending(timer) && timer->expires == expires) return 1; + expires = apply_slack(timer, expires); + return __mod_timer(timer, expires, false, TIMER_NOT_PINNED); } EXPORT_SYMBOL(mod_timer); @@ -955,6 +1012,47 @@ static int cascade(struct tvec_base *base, struct tvec *tv, int index) return index; } +static void call_timer_fn(struct timer_list *timer, void (*fn)(unsigned long), + unsigned long data) +{ + int preempt_count = preempt_count(); + +#ifdef CONFIG_LOCKDEP + /* + * It is permissible to free the timer from inside the + * function that is called from it, this we need to take into + * account for lockdep too. To avoid bogus "held lock freed" + * warnings as well as problems when looking into + * timer->lockdep_map, make a copy and use that here. + */ + struct lockdep_map lockdep_map = timer->lockdep_map; +#endif + /* + * Couple the lock chain with the lock chain at + * del_timer_sync() by acquiring the lock_map around the fn() + * call here and in del_timer_sync(). + */ + lock_map_acquire(&lockdep_map); + + trace_timer_expire_entry(timer); + fn(data); + trace_timer_expire_exit(timer); + + lock_map_release(&lockdep_map); + + if (preempt_count != preempt_count()) { + WARN_ONCE(1, "timer: %pF preempt leak: %08x -> %08x\n", + fn, preempt_count, preempt_count()); + /* + * Restore the preempt count. That gives us a decent + * chance to survive and extract information. If the + * callback kept a lock held, bad luck, but not worse + * than the BUG() we had. + */ + preempt_count() = preempt_count; + } +} + #define INDEX(N) ((base->timer_jiffies >> (TVR_BITS + (N) * TVN_BITS)) & TVN_MASK) /** @@ -998,45 +1096,7 @@ static inline void __run_timers(struct tvec_base *base) detach_timer(timer, 1); spin_unlock_irq(&base->lock); - { - int preempt_count = preempt_count(); - -#ifdef CONFIG_LOCKDEP - /* - * It is permissible to free the timer from - * inside the function that is called from - * it, this we need to take into account for - * lockdep too. To avoid bogus "held lock - * freed" warnings as well as problems when - * looking into timer->lockdep_map, make a - * copy and use that here. - */ - struct lockdep_map lockdep_map = - timer->lockdep_map; -#endif - /* - * Couple the lock chain with the lock chain at - * del_timer_sync() by acquiring the lock_map - * around the fn() call here and in - * del_timer_sync(). - */ - lock_map_acquire(&lockdep_map); - - trace_timer_expire_entry(timer); - fn(data); - trace_timer_expire_exit(timer); - - lock_map_release(&lockdep_map); - - if (preempt_count != preempt_count()) { - printk(KERN_ERR "huh, entered %p " - "with preempt_count %08x, exited" - " with %08x?\n", - fn, preempt_count, - preempt_count()); - BUG(); - } - } + call_timer_fn(timer, fn, data); spin_lock_irq(&base->lock); } } @@ -1620,11 +1680,14 @@ static int __cpuinit timer_cpu_notify(struct notifier_block *self, unsigned long action, void *hcpu) { long cpu = (long)hcpu; + int err; + switch(action) { case CPU_UP_PREPARE: case CPU_UP_PREPARE_FROZEN: - if (init_timers_cpu(cpu) < 0) - return NOTIFY_BAD; + err = init_timers_cpu(cpu); + if (err < 0) + return notifier_from_errno(err); break; #ifdef CONFIG_HOTPLUG_CPU case CPU_DEAD: diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index ba0ec81158b..55e48511d7c 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -3310,12 +3310,12 @@ static ssize_t tracing_splice_read_pipe(struct file *filp, size_t len, unsigned int flags) { - struct page *pages[PIPE_BUFFERS]; - struct partial_page partial[PIPE_BUFFERS]; + struct page *pages_def[PIPE_DEF_BUFFERS]; + struct partial_page partial_def[PIPE_DEF_BUFFERS]; struct trace_iterator *iter = filp->private_data; struct splice_pipe_desc spd = { - .pages = pages, - .partial = partial, + .pages = pages_def, + .partial = partial_def, .nr_pages = 0, /* This gets updated below. */ .flags = flags, .ops = &tracing_pipe_buf_ops, @@ -3326,6 +3326,9 @@ static ssize_t tracing_splice_read_pipe(struct file *filp, size_t rem; unsigned int i; + if (splice_grow_spd(pipe, &spd)) + return -ENOMEM; + /* copy the tracer to avoid using a global lock all around */ mutex_lock(&trace_types_lock); if (unlikely(old_tracer != current_trace && current_trace)) { @@ -3356,23 +3359,23 @@ static ssize_t tracing_splice_read_pipe(struct file *filp, trace_access_lock(iter->cpu_file); /* Fill as many pages as possible. */ - for (i = 0, rem = len; i < PIPE_BUFFERS && rem; i++) { - pages[i] = alloc_page(GFP_KERNEL); - if (!pages[i]) + for (i = 0, rem = len; i < pipe->buffers && rem; i++) { + spd.pages[i] = alloc_page(GFP_KERNEL); + if (!spd.pages[i]) break; rem = tracing_fill_pipe_page(rem, iter); /* Copy the data into the page, so we can start over. */ ret = trace_seq_to_buffer(&iter->seq, - page_address(pages[i]), + page_address(spd.pages[i]), iter->seq.len); if (ret < 0) { - __free_page(pages[i]); + __free_page(spd.pages[i]); break; } - partial[i].offset = 0; - partial[i].len = iter->seq.len; + spd.partial[i].offset = 0; + spd.partial[i].len = iter->seq.len; trace_seq_init(&iter->seq); } @@ -3383,12 +3386,14 @@ static ssize_t tracing_splice_read_pipe(struct file *filp, spd.nr_pages = i; - return splice_to_pipe(pipe, &spd); + ret = splice_to_pipe(pipe, &spd); +out: + splice_shrink_spd(pipe, &spd); + return ret; out_err: mutex_unlock(&iter->mutex); - - return ret; + goto out; } static ssize_t @@ -3787,11 +3792,11 @@ tracing_buffers_splice_read(struct file *file, loff_t *ppos, unsigned int flags) { struct ftrace_buffer_info *info = file->private_data; - struct partial_page partial[PIPE_BUFFERS]; - struct page *pages[PIPE_BUFFERS]; + struct partial_page partial_def[PIPE_DEF_BUFFERS]; + struct page *pages_def[PIPE_DEF_BUFFERS]; struct splice_pipe_desc spd = { - .pages = pages, - .partial = partial, + .pages = pages_def, + .partial = partial_def, .flags = flags, .ops = &buffer_pipe_buf_ops, .spd_release = buffer_spd_release, @@ -3800,22 +3805,28 @@ tracing_buffers_splice_read(struct file *file, loff_t *ppos, int entries, size, i; size_t ret; + if (splice_grow_spd(pipe, &spd)) + return -ENOMEM; + if (*ppos & (PAGE_SIZE - 1)) { WARN_ONCE(1, "Ftrace: previous read must page-align\n"); - return -EINVAL; + ret = -EINVAL; + goto out; } if (len & (PAGE_SIZE - 1)) { WARN_ONCE(1, "Ftrace: splice_read should page-align\n"); - if (len < PAGE_SIZE) - return -EINVAL; + if (len < PAGE_SIZE) { + ret = -EINVAL; + goto out; + } len &= PAGE_MASK; } trace_access_lock(info->cpu); entries = ring_buffer_entries_cpu(info->tr->buffer, info->cpu); - for (i = 0; i < PIPE_BUFFERS && len && entries; i++, len -= PAGE_SIZE) { + for (i = 0; i < pipe->buffers && len && entries; i++, len -= PAGE_SIZE) { struct page *page; int r; @@ -3870,11 +3881,12 @@ tracing_buffers_splice_read(struct file *file, loff_t *ppos, else ret = 0; /* TODO: block */ - return ret; + goto out; } ret = splice_to_pipe(pipe, &spd); - + splice_shrink_spd(pipe, &spd); +out: return ret; } diff --git a/kernel/trace/trace_output.c b/kernel/trace/trace_output.c index fc9d4dbb089..57c1b459647 100644 --- a/kernel/trace/trace_output.c +++ b/kernel/trace/trace_output.c @@ -209,6 +209,7 @@ int trace_seq_putc(struct trace_seq *s, unsigned char c) return 1; } +EXPORT_SYMBOL(trace_seq_putc); int trace_seq_putmem(struct trace_seq *s, const void *mem, size_t len) { @@ -355,6 +356,21 @@ ftrace_print_symbols_seq(struct trace_seq *p, unsigned long val, } EXPORT_SYMBOL(ftrace_print_symbols_seq); +const char * +ftrace_print_hex_seq(struct trace_seq *p, const unsigned char *buf, int buf_len) +{ + int i; + const char *ret = p->buffer + p->len; + + for (i = 0; i < buf_len; i++) + trace_seq_printf(p, "%s%2.2x", i == 0 ? "" : " ", buf[i]); + + trace_seq_putc(p, 0); + + return ret; +} +EXPORT_SYMBOL(ftrace_print_hex_seq); + #ifdef CONFIG_KRETPROBES static inline const char *kretprobed(const char *name) { diff --git a/kernel/user_namespace.c b/kernel/user_namespace.c index 076c7c8215b..b2d70d38dff 100644 --- a/kernel/user_namespace.c +++ b/kernel/user_namespace.c @@ -54,8 +54,8 @@ int create_user_ns(struct cred *new) #endif /* tgcred will be cleared in our caller bc CLONE_THREAD won't be set */ - /* alloc_uid() incremented the userns refcount. Just set it to 1 */ - kref_set(&ns->kref, 1); + /* root_user holds a reference to ns, our reference can be dropped */ + put_user_ns(ns); return 0; } diff --git a/kernel/workqueue.c b/kernel/workqueue.c index 5bfb213984b..327d2deb445 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -229,6 +229,16 @@ static inline void set_wq_data(struct work_struct *work, atomic_long_set(&work->data, new); } +/* + * Clear WORK_STRUCT_PENDING and the workqueue on which it was queued. + */ +static inline void clear_wq_data(struct work_struct *work) +{ + unsigned long flags = *work_data_bits(work) & + (1UL << WORK_STRUCT_STATIC); + atomic_long_set(&work->data, flags); +} + static inline struct cpu_workqueue_struct *get_wq_data(struct work_struct *work) { @@ -671,7 +681,7 @@ static int __cancel_work_timer(struct work_struct *work, wait_on_work(work); } while (unlikely(ret < 0)); - work_clear_pending(work); + clear_wq_data(work); return ret; } @@ -845,6 +855,30 @@ int schedule_on_each_cpu(work_func_t func) return 0; } +/** + * flush_scheduled_work - ensure that any scheduled work has run to completion. + * + * Forces execution of the kernel-global workqueue and blocks until its + * completion. + * + * Think twice before calling this function! It's very easy to get into + * trouble if you don't take great care. Either of the following situations + * will lead to deadlock: + * + * One of the work items currently on the workqueue needs to acquire + * a lock held by your code or its caller. + * + * Your code is running in the context of a work routine. + * + * They will be detected by lockdep when they occur, but the first might not + * occur very often. It depends on what work items are on the workqueue and + * what locks they need, which you have no control over. + * + * In most situations flushing the entire workqueue is overkill; you merely + * need to know that a particular work item isn't queued and isn't running. + * In such cases you should use cancel_delayed_work_sync() or + * cancel_work_sync() instead. + */ void flush_scheduled_work(void) { flush_workqueue(keventd_wq); @@ -1076,7 +1110,7 @@ static int __devinit workqueue_cpu_callback(struct notifier_block *nfb, unsigned int cpu = (unsigned long)hcpu; struct cpu_workqueue_struct *cwq; struct workqueue_struct *wq; - int ret = NOTIFY_OK; + int err = 0; action &= ~CPU_TASKS_FROZEN; @@ -1090,12 +1124,13 @@ undo: switch (action) { case CPU_UP_PREPARE: - if (!create_workqueue_thread(cwq, cpu)) + err = create_workqueue_thread(cwq, cpu); + if (!err) break; printk(KERN_ERR "workqueue [%s] for %i failed\n", wq->name, cpu); action = CPU_UP_CANCELED; - ret = NOTIFY_BAD; + err = -ENOMEM; goto undo; case CPU_ONLINE: @@ -1116,7 +1151,7 @@ undo: cpumask_clear_cpu(cpu, cpu_populated_map); } - return ret; + return notifier_from_errno(err); } #ifdef CONFIG_SMP |