diff options
Diffstat (limited to 'kernel/irq')
| -rw-r--r-- | kernel/irq/Makefile | 5 | ||||
| -rw-r--r-- | kernel/irq/autoprobe.c | 189 | ||||
| -rw-r--r-- | kernel/irq/handle.c | 193 | ||||
| -rw-r--r-- | kernel/irq/internals.h | 18 | ||||
| -rw-r--r-- | kernel/irq/manage.c | 349 | ||||
| -rw-r--r-- | kernel/irq/proc.c | 159 | ||||
| -rw-r--r-- | kernel/irq/spurious.c | 96 |
7 files changed, 1009 insertions, 0 deletions
diff --git a/kernel/irq/Makefile b/kernel/irq/Makefile new file mode 100644 index 00000000000..49378738ff5 --- /dev/null +++ b/kernel/irq/Makefile @@ -0,0 +1,5 @@ + +obj-y := handle.o manage.o spurious.o +obj-$(CONFIG_GENERIC_IRQ_PROBE) += autoprobe.o +obj-$(CONFIG_PROC_FS) += proc.o + diff --git a/kernel/irq/autoprobe.c b/kernel/irq/autoprobe.c new file mode 100644 index 00000000000..98d62d8efea --- /dev/null +++ b/kernel/irq/autoprobe.c @@ -0,0 +1,189 @@ +/* + * linux/kernel/irq/autoprobe.c + * + * Copyright (C) 1992, 1998-2004 Linus Torvalds, Ingo Molnar + * + * This file contains the interrupt probing code and driver APIs. + */ + +#include <linux/irq.h> +#include <linux/module.h> +#include <linux/interrupt.h> + +/* + * Autodetection depends on the fact that any interrupt that + * comes in on to an unassigned handler will get stuck with + * "IRQ_WAITING" cleared and the interrupt disabled. + */ +static DECLARE_MUTEX(probe_sem); + +/** + * probe_irq_on - begin an interrupt autodetect + * + * Commence probing for an interrupt. The interrupts are scanned + * and a mask of potential interrupt lines is returned. + * + */ +unsigned long probe_irq_on(void) +{ + unsigned long val, delay; + irq_desc_t *desc; + unsigned int i; + + down(&probe_sem); + /* + * something may have generated an irq long ago and we want to + * flush such a longstanding irq before considering it as spurious. + */ + for (i = NR_IRQS-1; i > 0; i--) { + desc = irq_desc + i; + + spin_lock_irq(&desc->lock); + if (!irq_desc[i].action) + irq_desc[i].handler->startup(i); + spin_unlock_irq(&desc->lock); + } + + /* Wait for longstanding interrupts to trigger. */ + for (delay = jiffies + HZ/50; time_after(delay, jiffies); ) + /* about 20ms delay */ barrier(); + + /* + * enable any unassigned irqs + * (we must startup again here because if a longstanding irq + * happened in the previous stage, it may have masked itself) + */ + for (i = NR_IRQS-1; i > 0; i--) { + desc = irq_desc + i; + + spin_lock_irq(&desc->lock); + if (!desc->action) { + desc->status |= IRQ_AUTODETECT | IRQ_WAITING; + if (desc->handler->startup(i)) + desc->status |= IRQ_PENDING; + } + spin_unlock_irq(&desc->lock); + } + + /* + * Wait for spurious interrupts to trigger + */ + for (delay = jiffies + HZ/10; time_after(delay, jiffies); ) + /* about 100ms delay */ barrier(); + + /* + * Now filter out any obviously spurious interrupts + */ + val = 0; + for (i = 0; i < NR_IRQS; i++) { + irq_desc_t *desc = irq_desc + i; + unsigned int status; + + spin_lock_irq(&desc->lock); + status = desc->status; + + if (status & IRQ_AUTODETECT) { + /* It triggered already - consider it spurious. */ + if (!(status & IRQ_WAITING)) { + desc->status = status & ~IRQ_AUTODETECT; + desc->handler->shutdown(i); + } else + if (i < 32) + val |= 1 << i; + } + spin_unlock_irq(&desc->lock); + } + + return val; +} + +EXPORT_SYMBOL(probe_irq_on); + +/** + * probe_irq_mask - scan a bitmap of interrupt lines + * @val: mask of interrupts to consider + * + * Scan the interrupt lines and return a bitmap of active + * autodetect interrupts. The interrupt probe logic state + * is then returned to its previous value. + * + * Note: we need to scan all the irq's even though we will + * only return autodetect irq numbers - just so that we reset + * them all to a known state. + */ +unsigned int probe_irq_mask(unsigned long val) +{ + unsigned int mask; + int i; + + mask = 0; + for (i = 0; i < NR_IRQS; i++) { + irq_desc_t *desc = irq_desc + i; + unsigned int status; + + spin_lock_irq(&desc->lock); + status = desc->status; + + if (status & IRQ_AUTODETECT) { + if (i < 16 && !(status & IRQ_WAITING)) + mask |= 1 << i; + + desc->status = status & ~IRQ_AUTODETECT; + desc->handler->shutdown(i); + } + spin_unlock_irq(&desc->lock); + } + up(&probe_sem); + + return mask & val; +} +EXPORT_SYMBOL(probe_irq_mask); + +/** + * probe_irq_off - end an interrupt autodetect + * @val: mask of potential interrupts (unused) + * + * Scans the unused interrupt lines and returns the line which + * appears to have triggered the interrupt. If no interrupt was + * found then zero is returned. If more than one interrupt is + * found then minus the first candidate is returned to indicate + * their is doubt. + * + * The interrupt probe logic state is returned to its previous + * value. + * + * BUGS: When used in a module (which arguably shouldn't happen) + * nothing prevents two IRQ probe callers from overlapping. The + * results of this are non-optimal. + */ +int probe_irq_off(unsigned long val) +{ + int i, irq_found = 0, nr_irqs = 0; + + for (i = 0; i < NR_IRQS; i++) { + irq_desc_t *desc = irq_desc + i; + unsigned int status; + + spin_lock_irq(&desc->lock); + status = desc->status; + + if (status & IRQ_AUTODETECT) { + if (!(status & IRQ_WAITING)) { + if (!nr_irqs) + irq_found = i; + nr_irqs++; + } + desc->status = status & ~IRQ_AUTODETECT; + desc->handler->shutdown(i); + } + spin_unlock_irq(&desc->lock); + } + up(&probe_sem); + + if (nr_irqs > 1) + irq_found = -irq_found; + return irq_found; +} + +EXPORT_SYMBOL(probe_irq_off); + diff --git a/kernel/irq/handle.c b/kernel/irq/handle.c new file mode 100644 index 00000000000..2fb0e46e11f --- /dev/null +++ b/kernel/irq/handle.c @@ -0,0 +1,193 @@ +/* + * linux/kernel/irq/handle.c + * + * Copyright (C) 1992, 1998-2004 Linus Torvalds, Ingo Molnar + * + * This file contains the core interrupt handling code. + */ + +#include <linux/irq.h> +#include <linux/module.h> +#include <linux/random.h> +#include <linux/interrupt.h> +#include <linux/kernel_stat.h> + +#include "internals.h" + +/* + * Linux has a controller-independent interrupt architecture. + * Every controller has a 'controller-template', that is used + * by the main code to do the right thing. Each driver-visible + * interrupt source is transparently wired to the apropriate + * controller. Thus drivers need not be aware of the + * interrupt-controller. + * + * The code is designed to be easily extended with new/different + * interrupt controllers, without having to do assembly magic or + * having to touch the generic code. + * + * Controller mappings for all interrupt sources: + */ +irq_desc_t irq_desc[NR_IRQS] __cacheline_aligned = { + [0 ... NR_IRQS-1] = { + .handler = &no_irq_type, + .lock = SPIN_LOCK_UNLOCKED + } +}; + +/* + * Generic 'no controller' code + */ +static void end_none(unsigned int irq) { } +static void enable_none(unsigned int irq) { } +static void disable_none(unsigned int irq) { } +static void shutdown_none(unsigned int irq) { } +static unsigned int startup_none(unsigned int irq) { return 0; } + +static void ack_none(unsigned int irq) +{ + /* + * 'what should we do if we get a hw irq event on an illegal vector'. + * each architecture has to answer this themself. + */ + ack_bad_irq(irq); +} + +struct hw_interrupt_type no_irq_type = { + .typename = "none", + .startup = startup_none, + .shutdown = shutdown_none, + .enable = enable_none, + .disable = disable_none, + .ack = ack_none, + .end = end_none, + .set_affinity = NULL +}; + +/* + * Special, empty irq handler: + */ +irqreturn_t no_action(int cpl, void *dev_id, struct pt_regs *regs) +{ + return IRQ_NONE; +} + +/* + * Have got an event to handle: + */ +fastcall int handle_IRQ_event(unsigned int irq, struct pt_regs *regs, + struct irqaction *action) +{ + int ret, retval = 0, status = 0; + + if (!(action->flags & SA_INTERRUPT)) + local_irq_enable(); + + do { + ret = action->handler(irq, action->dev_id, regs); + if (ret == IRQ_HANDLED) + status |= action->flags; + retval |= ret; + action = action->next; + } while (action); + + if (status & SA_SAMPLE_RANDOM) + add_interrupt_randomness(irq); + local_irq_disable(); + + return retval; +} + +/* + * do_IRQ handles all normal device IRQ's (the special + * SMP cross-CPU interrupts have their own specific + * handlers). + */ +fastcall unsigned int __do_IRQ(unsigned int irq, struct pt_regs *regs) +{ + irq_desc_t *desc = irq_desc + irq; + struct irqaction * action; + unsigned int status; + + kstat_this_cpu.irqs[irq]++; + if (desc->status & IRQ_PER_CPU) { + irqreturn_t action_ret; + + /* + * No locking required for CPU-local interrupts: + */ + desc->handler->ack(irq); + action_ret = handle_IRQ_event(irq, regs, desc->action); + if (!noirqdebug) + note_interrupt(irq, desc, action_ret); + desc->handler->end(irq); + return 1; + } + + spin_lock(&desc->lock); + desc->handler->ack(irq); + /* + * REPLAY is when Linux resends an IRQ that was dropped earlier + * WAITING is used by probe to mark irqs that are being tested + */ + status = desc->status & ~(IRQ_REPLAY | IRQ_WAITING); + status |= IRQ_PENDING; /* we _want_ to handle it */ + + /* + * If the IRQ is disabled for whatever reason, we cannot + * use the action we have. + */ + action = NULL; + if (likely(!(status & (IRQ_DISABLED | IRQ_INPROGRESS)))) { + action = desc->action; + status &= ~IRQ_PENDING; /* we commit to handling */ + status |= IRQ_INPROGRESS; /* we are handling it */ + } + desc->status = status; + + /* + * If there is no IRQ handler or it was disabled, exit early. + * Since we set PENDING, if another processor is handling + * a different instance of this same irq, the other processor + * will take care of it. + */ + if (unlikely(!action)) + goto out; + + /* + * Edge triggered interrupts need to remember + * pending events. + * This applies to any hw interrupts that allow a second + * instance of the same irq to arrive while we are in do_IRQ + * or in the handler. But the code here only handles the _second_ + * instance of the irq, not the third or fourth. So it is mostly + * useful for irq hardware that does not mask cleanly in an + * SMP environment. + */ + for (;;) { + irqreturn_t action_ret; + + spin_unlock(&desc->lock); + + action_ret = handle_IRQ_event(irq, regs, action); + + spin_lock(&desc->lock); + if (!noirqdebug) + note_interrupt(irq, desc, action_ret); + if (likely(!(desc->status & IRQ_PENDING))) + break; + desc->status &= ~IRQ_PENDING; + } + desc->status &= ~IRQ_INPROGRESS; + +out: + /* + * The ->end() handler has to deal with interrupts which got + * disabled while the handler was running. + */ + desc->handler->end(irq); + spin_unlock(&desc->lock); + + return 1; +} + diff --git a/kernel/irq/internals.h b/kernel/irq/internals.h new file mode 100644 index 00000000000..46feba63026 --- /dev/null +++ b/kernel/irq/internals.h @@ -0,0 +1,18 @@ +/* + * IRQ subsystem internal functions and variables: + */ + +extern int noirqdebug; + +#ifdef CONFIG_PROC_FS +extern void register_irq_proc(unsigned int irq); +extern void register_handler_proc(unsigned int irq, struct irqaction *action); +extern void unregister_handler_proc(unsigned int irq, struct irqaction *action); +#else +static inline void register_irq_proc(unsigned int irq) { } +static inline void register_handler_proc(unsigned int irq, + struct irqaction *action) { } +static inline void unregister_handler_proc(unsigned int irq, + struct irqaction *action) { } +#endif + diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c new file mode 100644 index 00000000000..5202e4c4a5b --- /dev/null +++ b/kernel/irq/manage.c @@ -0,0 +1,349 @@ +/* + * linux/kernel/irq/manage.c + * + * Copyright (C) 1992, 1998-2004 Linus Torvalds, Ingo Molnar + * + * This file contains driver APIs to the irq subsystem. + */ + +#include <linux/irq.h> +#include <linux/module.h> +#include <linux/random.h> +#include <linux/interrupt.h> + +#include "internals.h" + +#ifdef CONFIG_SMP + +cpumask_t irq_affinity[NR_IRQS] = { [0 ... NR_IRQS-1] = CPU_MASK_ALL }; + +/** + * synchronize_irq - wait for pending IRQ handlers (on other CPUs) + * + * This function waits for any pending IRQ handlers for this interrupt + * to complete before returning. If you use this function while + * holding a resource the IRQ handler may need you will deadlock. + * + * This function may be called - with care - from IRQ context. + */ +void synchronize_irq(unsigned int irq) +{ + struct irq_desc *desc = irq_desc + irq; + + while (desc->status & IRQ_INPROGRESS) + cpu_relax(); +} + +EXPORT_SYMBOL(synchronize_irq); + +#endif + +/** + * disable_irq_nosync - disable an irq without waiting + * @irq: Interrupt to disable + * + * Disable the selected interrupt line. Disables and Enables are + * nested. + * Unlike disable_irq(), this function does not ensure existing + * instances of the IRQ handler have completed before returning. + * + * This function may be called from IRQ context. + */ +void disable_irq_nosync(unsigned int irq) +{ + irq_desc_t *desc = irq_desc + irq; + unsigned long flags; + + spin_lock_irqsave(&desc->lock, flags); + if (!desc->depth++) { + desc->status |= IRQ_DISABLED; + desc->handler->disable(irq); + } + spin_unlock_irqrestore(&desc->lock, flags); +} + +EXPORT_SYMBOL(disable_irq_nosync); + +/** + * disable_irq - disable an irq and wait for completion + * @irq: Interrupt to disable + * + * Disable the selected interrupt line. Enables and Disables are + * nested. + * This function waits for any pending IRQ handlers for this interrupt + * to complete before returning. If you use this function while + * holding a resource the IRQ handler may need you will deadlock. + * + * This function may be called - with care - from IRQ context. + */ +void disable_irq(unsigned int irq) +{ + irq_desc_t *desc = irq_desc + irq; + + disable_irq_nosync(irq); + if (desc->action) + synchronize_irq(irq); +} + +EXPORT_SYMBOL(disable_irq); + +/** + * enable_irq - enable handling of an irq + * @irq: Interrupt to enable + * + * Undoes the effect of one call to disable_irq(). If this + * matches the last disable, processing of interrupts on this + * IRQ line is re-enabled. + * + * This function may be called from IRQ context. + */ +void enable_irq(unsigned int irq) +{ + irq_desc_t *desc = irq_desc + irq; + unsigned long flags; + + spin_lock_irqsave(&desc->lock, flags); + switch (desc->depth) { + case 0: + WARN_ON(1); + break; + case 1: { + unsigned int status = desc->status & ~IRQ_DISABLED; + + desc->status = status; + if ((status & (IRQ_PENDING | IRQ_REPLAY)) == IRQ_PENDING) { + desc->status = status | IRQ_REPLAY; + hw_resend_irq(desc->handler,irq); + } + desc->handler->enable(irq); + /* fall-through */ + } + default: + desc->depth--; + } + spin_unlock_irqrestore(&desc->lock, flags); +} + +EXPORT_SYMBOL(enable_irq); + +/* + * Internal function that tells the architecture code whether a + * particular irq has been exclusively allocated or is available + * for driver use. + */ +int can_request_irq(unsigned int irq, unsigned long irqflags) +{ + struct irqaction *action; + + if (irq >= NR_IRQS) + return 0; + + action = irq_desc[irq].action; + if (action) + if (irqflags & action->flags & SA_SHIRQ) + action = NULL; + + return !action; +} + +/* + * Internal function to register an irqaction - typically used to + * allocate special interrupts that are part of the architecture. + */ +int setup_irq(unsigned int irq, struct irqaction * new) +{ + struct irq_desc *desc = irq_desc + irq; + struct irqaction *old, **p; + unsigned long flags; + int shared = 0; + + if (desc->handler == &no_irq_type) + return -ENOSYS; + /* + * Some drivers like serial.c use request_irq() heavily, + * so we have to be careful not to interfere with a + * running system. + */ + if (new->flags & SA_SAMPLE_RANDOM) { + /* + * This function might sleep, we want to call it first, + * outside of the atomic block. + * Yes, this might clear the entropy pool if the wrong + * driver is attempted to be loaded, without actually + * installing a new handler, but is this really a problem, + * only the sysadmin is able to do this. + */ + rand_initialize_irq(irq); + } + + /* + * The following block of code has to be executed atomically + */ + spin_lock_irqsave(&desc->lock,flags); + p = &desc->action; + if ((old = *p) != NULL) { + /* Can't share interrupts unless both agree to */ + if (!(old->flags & new->flags & SA_SHIRQ)) { + spin_unlock_irqrestore(&desc->lock,flags); + return -EBUSY; + } + + /* add new interrupt at end of irq queue */ + do { + p = &old->next; + old = *p; + } while (old); + shared = 1; + } + + *p = new; + + if (!shared) { + desc->depth = 0; + desc->status &= ~(IRQ_DISABLED | IRQ_AUTODETECT | + IRQ_WAITING | IRQ_INPROGRESS); + if (desc->handler->startup) + desc->handler->startup(irq); + else + desc->handler->enable(irq); + } + spin_unlock_irqrestore(&desc->lock,flags); + + new->irq = irq; + register_irq_proc(irq); + new->dir = NULL; + register_handler_proc(irq, new); + + return 0; +} + +/** + * free_irq - free an interrupt + * @irq: Interrupt line to free + * @dev_id: Device identity to free + * + * Remove an interrupt handler. The handler is removed and if the + * interrupt line is no longer in use by any driver it is disabled. + * On a shared IRQ the caller must ensure the interrupt is disabled + * on the card it drives before calling this function. The function + * does not return until any executing interrupts for this IRQ + * have completed. + * + * This function must not be called from interrupt context. + */ +void free_irq(unsigned int irq, void *dev_id) +{ + struct irq_desc *desc; + struct irqaction **p; + unsigned long flags; + + if (irq >= NR_IRQS) + return; + + desc = irq_desc + irq; + spin_lock_irqsave(&desc->lock,flags); + p = &desc->action; + for (;;) { + struct irqaction * action = *p; + + if (action) { + struct irqaction **pp = p; + + p = &action->next; + if (action->dev_id != dev_id) + continue; + + /* Found it - now remove it from the list of entries */ + *pp = action->next; + if (!desc->action) { + desc->status |= IRQ_DISABLED; + if (desc->handler->shutdown) + desc->handler->shutdown(irq); + else + desc->handler->disable(irq); + } + spin_unlock_irqrestore(&desc->lock,flags); + unregister_handler_proc(irq, action); + + /* Make sure it's not being used on another CPU */ + synchronize_irq(irq); + kfree(action); + return; + } + printk(KERN_ERR "Trying to free free IRQ%d\n",irq); + spin_unlock_irqrestore(&desc->lock,flags); + return; + } +} + +EXPORT_SYMBOL(free_irq); + +/** + * request_irq - allocate an interrupt line + * @irq: Interrupt line to allocate + * @handler: Function to be called when the IRQ occurs + * @irqflags: Interrupt type flags + * @devname: An ascii name for the claiming device + * @dev_id: A cookie passed back to the handler function + * + * This call allocates interrupt resources and enables the + * interrupt line and IRQ handling. From the point this + * call is made your handler function may be invoked. Since + * your handler function must clear any interrupt the board + * raises, you must take care both to initialise your hardware + * and to set up the interrupt handler in the right order. + * + * Dev_id must be globally unique. Normally the address of the + * device data structure is used as the cookie. Since the handler + * receives this value it makes sense to use it. + * + * If your interrupt is shared you must pass a non NULL dev_id + * as this is required when freeing the interrupt. + * + * Flags: + * + * SA_SHIRQ Interrupt is shared + * SA_INTERRUPT Disable local interrupts while processing + * SA_SAMPLE_RANDOM The interrupt can be used for entropy + * + */ +int request_irq(unsigned int irq, + irqreturn_t (*handler)(int, void *, struct pt_regs *), + unsigned long irqflags, const char * devname, void *dev_id) +{ + struct irqaction * action; + int retval; + + /* + * Sanity-check: shared interrupts must pass in a real dev-ID, + * otherwise we'll have trouble later trying to figure out + * which interrupt is which (messes up the interrupt freeing + * logic etc). + */ + if ((irqflags & SA_SHIRQ) && !dev_id) + return -EINVAL; + if (irq >= NR_IRQS) + return -EINVAL; + if (!handler) + return -EINVAL; + + action = kmalloc(sizeof(struct irqaction), GFP_ATOMIC); + if (!action) + return -ENOMEM; + + action->handler = handler; + action->flags = irqflags; + cpus_clear(action->mask); + action->name = devname; + action->next = NULL; + action->dev_id = dev_id; + + retval = setup_irq(irq, action); + if (retval) + kfree(action); + + return retval; +} + +EXPORT_SYMBOL(request_irq); + diff --git a/kernel/irq/proc.c b/kernel/irq/proc.c new file mode 100644 index 00000000000..85d08daa660 --- /dev/null +++ b/kernel/irq/proc.c @@ -0,0 +1,159 @@ +/* + * linux/kernel/irq/proc.c + * + * Copyright (C) 1992, 1998-2004 Linus Torvalds, Ingo Molnar + * + * This file contains the /proc/irq/ handling code. + */ + +#include <linux/irq.h> +#include <linux/proc_fs.h> +#include <linux/interrupt.h> + +static struct proc_dir_entry *root_irq_dir, *irq_dir[NR_IRQS]; + +#ifdef CONFIG_SMP + +/* + * The /proc/irq/<irq>/smp_affinity values: + */ +static struct proc_dir_entry *smp_affinity_entry[NR_IRQS]; + +void __attribute__((weak)) +proc_set_irq_affinity(unsigned int irq, cpumask_t mask_val) +{ + irq_affinity[irq] = mask_val; + irq_desc[irq].handler->set_affinity(irq, mask_val); +} + +static int irq_affinity_read_proc(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + int len = cpumask_scnprintf(page, count, irq_affinity[(long)data]); + + if (count - len < 2) + return -EINVAL; + len += sprintf(page + len, "\n"); + return len; +} + +int no_irq_affinity; +static int irq_affinity_write_proc(struct file *file, const char __user *buffer, + unsigned long count, void *data) +{ + unsigned int irq = (int)(long)data, full_count = count, err; + cpumask_t new_value, tmp; + + if (!irq_desc[irq].handler->set_affinity || no_irq_affinity) + return -EIO; + + err = cpumask_parse(buffer, count, new_value); + if (err) + return err; + + /* + * Do not allow disabling IRQs completely - it's a too easy + * way to make the system unusable accidentally :-) At least + * one online CPU still has to be targeted. + */ + cpus_and(tmp, new_value, cpu_online_map); + if (cpus_empty(tmp)) + return -EINVAL; + + proc_set_irq_affinity(irq, new_value); + + return full_count; +} + +#endif + +#define MAX_NAMELEN 128 + +static int name_unique(unsigned int irq, struct irqaction *new_action) +{ + struct irq_desc *desc = irq_desc + irq; + struct irqaction *action; + + for (action = desc->action ; action; action = action->next) + if ((action != new_action) && action->name && + !strcmp(new_action->name, action->name)) + return 0; + return 1; +} + +void register_handler_proc(unsigned int irq, struct irqaction *action) +{ + char name [MAX_NAMELEN]; + + if (!irq_dir[irq] || action->dir || !action->name || + !name_unique(irq, action)) + return; + + memset(name, 0, MAX_NAMELEN); + snprintf(name, MAX_NAMELEN, "%s", action->name); + + /* create /proc/irq/1234/handler/ */ + action->dir = proc_mkdir(name, irq_dir[irq]); +} + +#undef MAX_NAMELEN + +#define MAX_NAMELEN 10 + +void register_irq_proc(unsigned int irq) +{ + char name [MAX_NAMELEN]; + + if (!root_irq_dir || + (irq_desc[irq].handler == &no_irq_type) || + irq_dir[irq]) + return; + + memset(name, 0, MAX_NAMELEN); + sprintf(name, "%d", irq); + + /* create /proc/irq/1234 */ + irq_dir[irq] = proc_mkdir(name, root_irq_dir); + +#ifdef CONFIG_SMP + { + struct proc_dir_entry *entry; + + /* create /proc/irq/<irq>/smp_affinity */ + entry = create_proc_entry("smp_affinity", 0600, irq_dir[irq]); + + if (entry) { + entry->nlink = 1; + entry->data = (void *)(long)irq; + entry->read_proc = irq_affinity_read_proc; + entry->write_proc = irq_affinity_write_proc; + } + smp_affinity_entry[irq] = entry; + } +#endif +} + +#undef MAX_NAMELEN + +void unregister_handler_proc(unsigned int irq, struct irqaction *action) +{ + if (action->dir) + remove_proc_entry(action->dir->name, irq_dir[irq]); +} + +void init_irq_proc(void) +{ + int i; + + /* create /proc/irq */ + root_irq_dir = proc_mkdir("irq", NULL); + if (!root_irq_dir) + return; + + /* + * Create entries for all existing IRQs. + */ + for (i = 0; i < NR_IRQS; i++) + register_irq_proc(i); +} + diff --git a/kernel/irq/spurious.c b/kernel/irq/spurious.c new file mode 100644 index 00000000000..f6297c30690 --- /dev/null +++ b/kernel/irq/spurious.c @@ -0,0 +1,96 @@ +/* + * linux/kernel/irq/spurious.c + * + * Copyright (C) 1992, 1998-2004 Linus Torvalds, Ingo Molnar + * + * This file contains spurious interrupt handling. + */ + +#include <linux/irq.h> +#include <linux/module.h> +#include <linux/kallsyms.h> +#include <linux/interrupt.h> + +/* + * If 99,900 of the previous 100,000 interrupts have not been handled + * then assume that the IRQ is stuck in some manner. Drop a diagnostic + * and try to turn the IRQ off. + * + * (The other 100-of-100,000 interrupts may have been a correctly + * functioning device sharing an IRQ with the failing one) + * + * Called under desc->lock + */ + +static void +__report_bad_irq(unsigned int irq, irq_desc_t *desc, irqreturn_t action_ret) +{ + struct irqaction *action; + + if (action_ret != IRQ_HANDLED && action_ret != IRQ_NONE) { + printk(KERN_ERR "irq event %d: bogus return value %x\n", + irq, action_ret); + } else { + printk(KERN_ERR "irq %d: nobody cared!\n", irq); + } + dump_stack(); + printk(KERN_ERR "handlers:\n"); + action = desc->action; + while (action) { + printk(KERN_ERR "[<%p>]", action->handler); + print_symbol(" (%s)", + (unsigned long)action->handler); + printk("\n"); + action = action->next; + } +} + +void report_bad_irq(unsigned int irq, irq_desc_t *desc, irqreturn_t action_ret) +{ + static int count = 100; + + if (count > 0) { + count--; + __report_bad_irq(irq, desc, action_ret); + } +} + +void note_interrupt(unsigned int irq, irq_desc_t *desc, irqreturn_t action_ret) +{ + if (action_ret != IRQ_HANDLED) { + desc->irqs_unhandled++; + if (action_ret != IRQ_NONE) + report_bad_irq(irq, desc, action_ret); + } + + desc->irq_count++; + if (desc->irq_count < 100000) + return; + + desc->irq_count = 0; + if (desc->irqs_unhandled > 99900) { + /* + * The interrupt is stuck + */ + __report_bad_irq(irq, desc, action_ret); + /* + * Now kill the IRQ + */ + printk(KERN_EMERG "Disabling IRQ #%d\n", irq); + desc->status |= IRQ_DISABLED; + desc->handler->disable(irq); + } + desc->irqs_unhandled = 0; +} + +int noirqdebug; + +int __init noirqdebug_setup(char *str) +{ + noirqdebug = 1; + printk(KERN_INFO "IRQ lockup detection disabled\n"); + return 1; +} + +__setup("noirqdebug", noirqdebug_setup); + |