diff options
Diffstat (limited to 'kernel/debug/kdb/kdb_main.c')
| -rw-r--r-- | kernel/debug/kdb/kdb_main.c | 2845 |
1 files changed, 2845 insertions, 0 deletions
diff --git a/kernel/debug/kdb/kdb_main.c b/kernel/debug/kdb/kdb_main.c new file mode 100644 index 00000000000..64ef9ac14ba --- /dev/null +++ b/kernel/debug/kdb/kdb_main.c @@ -0,0 +1,2845 @@ +/* + * Kernel Debugger Architecture Independent Main Code + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1999-2004 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (C) 2000 Stephane Eranian <eranian@hpl.hp.com> + * Xscale (R) modifications copyright (C) 2003 Intel Corporation. + * Copyright (c) 2009 Wind River Systems, Inc. All Rights Reserved. + */ + +#include <linux/ctype.h> +#include <linux/string.h> +#include <linux/kernel.h> +#include <linux/reboot.h> +#include <linux/sched.h> +#include <linux/sysrq.h> +#include <linux/smp.h> +#include <linux/utsname.h> +#include <linux/vmalloc.h> +#include <linux/module.h> +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/kallsyms.h> +#include <linux/kgdb.h> +#include <linux/kdb.h> +#include <linux/notifier.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/nmi.h> +#include <linux/time.h> +#include <linux/ptrace.h> +#include <linux/sysctl.h> +#include <linux/cpu.h> +#include <linux/kdebug.h> +#include <linux/proc_fs.h> +#include <linux/uaccess.h> +#include <linux/slab.h> +#include "kdb_private.h" + +#define GREP_LEN 256 +char kdb_grep_string[GREP_LEN]; +int kdb_grepping_flag; +EXPORT_SYMBOL(kdb_grepping_flag); +int kdb_grep_leading; +int kdb_grep_trailing; + +/* + * Kernel debugger state flags + */ +int kdb_flags; +atomic_t kdb_event; + +/* + * kdb_lock protects updates to kdb_initial_cpu. Used to + * single thread processors through the kernel debugger. + */ +int kdb_initial_cpu = -1; /* cpu number that owns kdb */ +int kdb_nextline = 1; +int kdb_state; /* General KDB state */ + +struct task_struct *kdb_current_task; +EXPORT_SYMBOL(kdb_current_task); +struct pt_regs *kdb_current_regs; + +const char *kdb_diemsg; +static int kdb_go_count; +#ifdef CONFIG_KDB_CONTINUE_CATASTROPHIC +static unsigned int kdb_continue_catastrophic = + CONFIG_KDB_CONTINUE_CATASTROPHIC; +#else +static unsigned int kdb_continue_catastrophic; +#endif + +/* kdb_commands describes the available commands. */ +static kdbtab_t *kdb_commands; +#define KDB_BASE_CMD_MAX 50 +static int kdb_max_commands = KDB_BASE_CMD_MAX; +static kdbtab_t kdb_base_commands[50]; +#define for_each_kdbcmd(cmd, num) \ + for ((cmd) = kdb_base_commands, (num) = 0; \ + num < kdb_max_commands; \ + num == KDB_BASE_CMD_MAX ? cmd = kdb_commands : cmd++, num++) + +typedef struct _kdbmsg { + int km_diag; /* kdb diagnostic */ + char *km_msg; /* Corresponding message text */ +} kdbmsg_t; + +#define KDBMSG(msgnum, text) \ + { KDB_##msgnum, text } + +static kdbmsg_t kdbmsgs[] = { + KDBMSG(NOTFOUND, "Command Not Found"), + KDBMSG(ARGCOUNT, "Improper argument count, see usage."), + KDBMSG(BADWIDTH, "Illegal value for BYTESPERWORD use 1, 2, 4 or 8, " + "8 is only allowed on 64 bit systems"), + KDBMSG(BADRADIX, "Illegal value for RADIX use 8, 10 or 16"), + KDBMSG(NOTENV, "Cannot find environment variable"), + KDBMSG(NOENVVALUE, "Environment variable should have value"), + KDBMSG(NOTIMP, "Command not implemented"), + KDBMSG(ENVFULL, "Environment full"), + KDBMSG(ENVBUFFULL, "Environment buffer full"), + KDBMSG(TOOMANYBPT, "Too many breakpoints defined"), +#ifdef CONFIG_CPU_XSCALE + KDBMSG(TOOMANYDBREGS, "More breakpoints than ibcr registers defined"), +#else + KDBMSG(TOOMANYDBREGS, "More breakpoints than db registers defined"), +#endif + KDBMSG(DUPBPT, "Duplicate breakpoint address"), + KDBMSG(BPTNOTFOUND, "Breakpoint not found"), + KDBMSG(BADMODE, "Invalid IDMODE"), + KDBMSG(BADINT, "Illegal numeric value"), + KDBMSG(INVADDRFMT, "Invalid symbolic address format"), + KDBMSG(BADREG, "Invalid register name"), + KDBMSG(BADCPUNUM, "Invalid cpu number"), + KDBMSG(BADLENGTH, "Invalid length field"), + KDBMSG(NOBP, "No Breakpoint exists"), + KDBMSG(BADADDR, "Invalid address"), +}; +#undef KDBMSG + +static const int __nkdb_err = sizeof(kdbmsgs) / sizeof(kdbmsg_t); + + +/* + * Initial environment. This is all kept static and local to + * this file. We don't want to rely on the memory allocation + * mechanisms in the kernel, so we use a very limited allocate-only + * heap for new and altered environment variables. The entire + * environment is limited to a fixed number of entries (add more + * to __env[] if required) and a fixed amount of heap (add more to + * KDB_ENVBUFSIZE if required). + */ + +static char *__env[] = { +#if defined(CONFIG_SMP) + "PROMPT=[%d]kdb> ", + "MOREPROMPT=[%d]more> ", +#else + "PROMPT=kdb> ", + "MOREPROMPT=more> ", +#endif + "RADIX=16", + "MDCOUNT=8", /* lines of md output */ + "BTARGS=9", /* 9 possible args in bt */ + KDB_PLATFORM_ENV, + "DTABCOUNT=30", + "NOSECT=1", + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, +}; + +static const int __nenv = (sizeof(__env) / sizeof(char *)); + +struct task_struct *kdb_curr_task(int cpu) +{ + struct task_struct *p = curr_task(cpu); +#ifdef _TIF_MCA_INIT + if ((task_thread_info(p)->flags & _TIF_MCA_INIT) && KDB_TSK(cpu)) + p = krp->p; +#endif + return p; +} + +/* + * kdbgetenv - This function will return the character string value of + * an environment variable. + * Parameters: + * match A character string representing an environment variable. + * Returns: + * NULL No environment variable matches 'match' + * char* Pointer to string value of environment variable. + */ +char *kdbgetenv(const char *match) +{ + char **ep = __env; + int matchlen = strlen(match); + int i; + + for (i = 0; i < __nenv; i++) { + char *e = *ep++; + + if (!e) + continue; + + if ((strncmp(match, e, matchlen) == 0) + && ((e[matchlen] == '\0') + || (e[matchlen] == '='))) { + char *cp = strchr(e, '='); + return cp ? ++cp : ""; + } + } + return NULL; +} + +/* + * kdballocenv - This function is used to allocate bytes for + * environment entries. + * Parameters: + * match A character string representing a numeric value + * Outputs: + * *value the unsigned long representation of the env variable 'match' + * Returns: + * Zero on success, a kdb diagnostic on failure. + * Remarks: + * We use a static environment buffer (envbuffer) to hold the values + * of dynamically generated environment variables (see kdb_set). Buffer + * space once allocated is never free'd, so over time, the amount of space + * (currently 512 bytes) will be exhausted if env variables are changed + * frequently. + */ +static char *kdballocenv(size_t bytes) +{ +#define KDB_ENVBUFSIZE 512 + static char envbuffer[KDB_ENVBUFSIZE]; + static int envbufsize; + char *ep = NULL; + + if ((KDB_ENVBUFSIZE - envbufsize) >= bytes) { + ep = &envbuffer[envbufsize]; + envbufsize += bytes; + } + return ep; +} + +/* + * kdbgetulenv - This function will return the value of an unsigned + * long-valued environment variable. + * Parameters: + * match A character string representing a numeric value + * Outputs: + * *value the unsigned long represntation of the env variable 'match' + * Returns: + * Zero on success, a kdb diagnostic on failure. + */ +static int kdbgetulenv(const char *match, unsigned long *value) +{ + char *ep; + + ep = kdbgetenv(match); + if (!ep) + return KDB_NOTENV; + if (strlen(ep) == 0) + return KDB_NOENVVALUE; + + *value = simple_strtoul(ep, NULL, 0); + + return 0; +} + +/* + * kdbgetintenv - This function will return the value of an + * integer-valued environment variable. + * Parameters: + * match A character string representing an integer-valued env variable + * Outputs: + * *value the integer representation of the environment variable 'match' + * Returns: + * Zero on success, a kdb diagnostic on failure. + */ +int kdbgetintenv(const char *match, int *value) +{ + unsigned long val; + int diag; + + diag = kdbgetulenv(match, &val); + if (!diag) + *value = (int) val; + return diag; +} + +/* + * kdbgetularg - This function will convert a numeric string into an + * unsigned long value. + * Parameters: + * arg A character string representing a numeric value + * Outputs: + * *value the unsigned long represntation of arg. + * Returns: + * Zero on success, a kdb diagnostic on failure. + */ +int kdbgetularg(const char *arg, unsigned long *value) +{ + char *endp; + unsigned long val; + + val = simple_strtoul(arg, &endp, 0); + + if (endp == arg) { + /* + * Try base 16, for us folks too lazy to type the + * leading 0x... + */ + val = simple_strtoul(arg, &endp, 16); + if (endp == arg) + return KDB_BADINT; + } + + *value = val; + + return 0; +} + +/* + * kdb_set - This function implements the 'set' command. Alter an + * existing environment variable or create a new one. + */ +int kdb_set(int argc, const char **argv) +{ + int i; + char *ep; + size_t varlen, vallen; + + /* + * we can be invoked two ways: + * set var=value argv[1]="var", argv[2]="value" + * set var = value argv[1]="var", argv[2]="=", argv[3]="value" + * - if the latter, shift 'em down. + */ + if (argc == 3) { + argv[2] = argv[3]; + argc--; + } + + if (argc != 2) + return KDB_ARGCOUNT; + + /* + * Check for internal variables + */ + if (strcmp(argv[1], "KDBDEBUG") == 0) { + unsigned int debugflags; + char *cp; + + debugflags = simple_strtoul(argv[2], &cp, 0); + if (cp == argv[2] || debugflags & ~KDB_DEBUG_FLAG_MASK) { + kdb_printf("kdb: illegal debug flags '%s'\n", + argv[2]); + return 0; + } + kdb_flags = (kdb_flags & + ~(KDB_DEBUG_FLAG_MASK << KDB_DEBUG_FLAG_SHIFT)) + | (debugflags << KDB_DEBUG_FLAG_SHIFT); + + return 0; + } + + /* + * Tokenizer squashed the '=' sign. argv[1] is variable + * name, argv[2] = value. + */ + varlen = strlen(argv[1]); + vallen = strlen(argv[2]); + ep = kdballocenv(varlen + vallen + 2); + if (ep == (char *)0) + return KDB_ENVBUFFULL; + + sprintf(ep, "%s=%s", argv[1], argv[2]); + + ep[varlen+vallen+1] = '\0'; + + for (i = 0; i < __nenv; i++) { + if (__env[i] + && ((strncmp(__env[i], argv[1], varlen) == 0) + && ((__env[i][varlen] == '\0') + || (__env[i][varlen] == '=')))) { + __env[i] = ep; + return 0; + } + } + + /* + * Wasn't existing variable. Fit into slot. + */ + for (i = 0; i < __nenv-1; i++) { + if (__env[i] == (char *)0) { + __env[i] = ep; + return 0; + } + } + + return KDB_ENVFULL; +} + +static int kdb_check_regs(void) +{ + if (!kdb_current_regs) { + kdb_printf("No current kdb registers." + " You may need to select another task\n"); + return KDB_BADREG; + } + return 0; +} + +/* + * kdbgetaddrarg - This function is responsible for parsing an + * address-expression and returning the value of the expression, + * symbol name, and offset to the caller. + * + * The argument may consist of a numeric value (decimal or + * hexidecimal), a symbol name, a register name (preceeded by the + * percent sign), an environment variable with a numeric value + * (preceeded by a dollar sign) or a simple arithmetic expression + * consisting of a symbol name, +/-, and a numeric constant value + * (offset). + * Parameters: + * argc - count of arguments in argv + * argv - argument vector + * *nextarg - index to next unparsed argument in argv[] + * regs - Register state at time of KDB entry + * Outputs: + * *value - receives the value of the address-expression + * *offset - receives the offset specified, if any + * *name - receives the symbol name, if any + * *nextarg - index to next unparsed argument in argv[] + * Returns: + * zero is returned on success, a kdb diagnostic code is + * returned on error. + */ +int kdbgetaddrarg(int argc, const char **argv, int *nextarg, + unsigned long *value, long *offset, + char **name) +{ + unsigned long addr; + unsigned long off = 0; + int positive; + int diag; + int found = 0; + char *symname; + char symbol = '\0'; + char *cp; + kdb_symtab_t symtab; + + /* + * Process arguments which follow the following syntax: + * + * symbol | numeric-address [+/- numeric-offset] + * %register + * $environment-variable + */ + + if (*nextarg > argc) + return KDB_ARGCOUNT; + + symname = (char *)argv[*nextarg]; + + /* + * If there is no whitespace between the symbol + * or address and the '+' or '-' symbols, we + * remember the character and replace it with a + * null so the symbol/value can be properly parsed + */ + cp = strpbrk(symname, "+-"); + if (cp != NULL) { + symbol = *cp; + *cp++ = '\0'; + } + + if (symname[0] == '$') { + diag = kdbgetulenv(&symname[1], &addr); + if (diag) + return diag; + } else if (symname[0] == '%') { + diag = kdb_check_regs(); + if (diag) + return diag; + /* Implement register values with % at a later time as it is + * arch optional. + */ + return KDB_NOTIMP; + } else { + found = kdbgetsymval(symname, &symtab); + if (found) { + addr = symtab.sym_start; + } else { + diag = kdbgetularg(argv[*nextarg], &addr); + if (diag) + return diag; + } + } + + if (!found) + found = kdbnearsym(addr, &symtab); + + (*nextarg)++; + + if (name) + *name = symname; + if (value) + *value = addr; + if (offset && name && *name) + *offset = addr - symtab.sym_start; + + if ((*nextarg > argc) + && (symbol == '\0')) + return 0; + + /* + * check for +/- and offset + */ + + if (symbol == '\0') { + if ((argv[*nextarg][0] != '+') + && (argv[*nextarg][0] != '-')) { + /* + * Not our argument. Return. + */ + return 0; + } else { + positive = (argv[*nextarg][0] == '+'); + (*nextarg)++; + } + } else + positive = (symbol == '+'); + + /* + * Now there must be an offset! + */ + if ((*nextarg > argc) + && (symbol == '\0')) { + return KDB_INVADDRFMT; + } + + if (!symbol) { + cp = (char *)argv[*nextarg]; + (*nextarg)++; + } + + diag = kdbgetularg(cp, &off); + if (diag) + return diag; + + if (!positive) + off = -off; + + if (offset) + *offset += off; + + if (value) + *value += off; + + return 0; +} + +static void kdb_cmderror(int diag) +{ + int i; + + if (diag >= 0) { + kdb_printf("no error detected (diagnostic is %d)\n", diag); + return; + } + + for (i = 0; i < __nkdb_err; i++) { + if (kdbmsgs[i].km_diag == diag) { + kdb_printf("diag: %d: %s\n", diag, kdbmsgs[i].km_msg); + return; + } + } + + kdb_printf("Unknown diag %d\n", -diag); +} + +/* + * kdb_defcmd, kdb_defcmd2 - This function implements the 'defcmd' + * command which defines one command as a set of other commands, + * terminated by endefcmd. kdb_defcmd processes the initial + * 'defcmd' command, kdb_defcmd2 is invoked from kdb_parse for + * the following commands until 'endefcmd'. + * Inputs: + * argc argument count + * argv argument vector + * Returns: + * zero for success, a kdb diagnostic if error + */ +struct defcmd_set { + int count; + int usable; + char *name; + char *usage; + char *help; + char **command; +}; +static struct defcmd_set *defcmd_set; +static int defcmd_set_count; +static int defcmd_in_progress; + +/* Forward references */ +static int kdb_exec_defcmd(int argc, const char **argv); + +static int kdb_defcmd2(const char *cmdstr, const char *argv0) +{ + struct defcmd_set *s = defcmd_set + defcmd_set_count - 1; + char **save_command = s->command; + if (strcmp(argv0, "endefcmd") == 0) { + defcmd_in_progress = 0; + if (!s->count) + s->usable = 0; + if (s->usable) + kdb_register(s->name, kdb_exec_defcmd, + s->usage, s->help, 0); + return 0; + } + if (!s->usable) + return KDB_NOTIMP; + s->command = kmalloc((s->count + 1) * sizeof(*(s->command)), GFP_KDB); + if (!s->command) { + kdb_printf("Could not allocate new kdb_defcmd table for %s\n", + cmdstr); + s->usable = 0; + return KDB_NOTIMP; + } + memcpy(s->command, save_command, s->count * sizeof(*(s->command))); + s->command[s->count++] = kdb_strdup(cmdstr, GFP_KDB); + kfree(save_command); + return 0; +} + +static int kdb_defcmd(int argc, const char **argv) +{ + struct defcmd_set *save_defcmd_set = defcmd_set, *s; + if (defcmd_in_progress) { + kdb_printf("kdb: nested defcmd detected, assuming missing " + "endefcmd\n"); + kdb_defcmd2("endefcmd", "endefcmd"); + } + if (argc == 0) { + int i; + for (s = defcmd_set; s < defcmd_set + defcmd_set_count; ++s) { + kdb_printf("defcmd %s \"%s\" \"%s\"\n", s->name, + s->usage, s->help); + for (i = 0; i < s->count; ++i) + kdb_printf("%s", s->command[i]); + kdb_printf("endefcmd\n"); + } + return 0; + } + if (argc != 3) + return KDB_ARGCOUNT; + defcmd_set = kmalloc((defcmd_set_count + 1) * sizeof(*defcmd_set), + GFP_KDB); + if (!defcmd_set) { + kdb_printf("Could not allocate new defcmd_set entry for %s\n", + argv[1]); + defcmd_set = save_defcmd_set; + return KDB_NOTIMP; + } + memcpy(defcmd_set, save_defcmd_set, + defcmd_set_count * sizeof(*defcmd_set)); + kfree(save_defcmd_set); + s = defcmd_set + defcmd_set_count; + memset(s, 0, sizeof(*s)); + s->usable = 1; + s->name = kdb_strdup(argv[1], GFP_KDB); + s->usage = kdb_strdup(argv[2], GFP_KDB); + s->help = kdb_strdup(argv[3], GFP_KDB); + if (s->usage[0] == '"') { + strcpy(s->usage, s->usage+1); + s->usage[strlen(s->usage)-1] = '\0'; + } + if (s->help[0] == '"') { + strcpy(s->help, s->help+1); + s->help[strlen(s->help)-1] = '\0'; + } + ++defcmd_set_count; + defcmd_in_progress = 1; + return 0; +} + +/* + * kdb_exec_defcmd - Execute the set of commands associated with this + * defcmd name. + * Inputs: + * argc argument count + * argv argument vector + * Returns: + * zero for success, a kdb diagnostic if error + */ +static int kdb_exec_defcmd(int argc, const char **argv) +{ + int i, ret; + struct defcmd_set *s; + if (argc != 0) + return KDB_ARGCOUNT; + for (s = defcmd_set, i = 0; i < defcmd_set_count; ++i, ++s) { + if (strcmp(s->name, argv[0]) == 0) + break; + } + if (i == defcmd_set_count) { + kdb_printf("kdb_exec_defcmd: could not find commands for %s\n", + argv[0]); + return KDB_NOTIMP; + } + for (i = 0; i < s->count; ++i) { + /* Recursive use of kdb_parse, do not use argv after + * this point */ + argv = NULL; + kdb_printf("[%s]kdb> %s\n", s->name, s->command[i]); + ret = kdb_parse(s->command[i]); + if (ret) + return ret; + } + return 0; +} + +/* Command history */ +#define KDB_CMD_HISTORY_COUNT 32 +#define CMD_BUFLEN 200 /* kdb_printf: max printline + * size == 256 */ +static unsigned int cmd_head, cmd_tail; +static unsigned int cmdptr; +static char cmd_hist[KDB_CMD_HISTORY_COUNT][CMD_BUFLEN]; +static char cmd_cur[CMD_BUFLEN]; + +/* + * The "str" argument may point to something like | grep xyz + */ +static void parse_grep(const char *str) +{ + int len; + char *cp = (char *)str, *cp2; + + /* sanity check: we should have been called with the \ first */ + if (*cp != '|') + return; + cp++; + while (isspace(*cp)) + cp++; + if (strncmp(cp, "grep ", 5)) { + kdb_printf("invalid 'pipe', see grephelp\n"); + return; + } + cp += 5; + while (isspace(*cp)) + cp++; + cp2 = strchr(cp, '\n'); + if (cp2) + *cp2 = '\0'; /* remove the trailing newline */ + len = strlen(cp); + if (len == 0) { + kdb_printf("invalid 'pipe', see grephelp\n"); + return; + } + /* now cp points to a nonzero length search string */ + if (*cp == '"') { + /* allow it be "x y z" by removing the "'s - there must + be two of them */ + cp++; + cp2 = strchr(cp, '"'); + if (!cp2) { + kdb_printf("invalid quoted string, see grephelp\n"); + return; + } + *cp2 = '\0'; /* end the string where the 2nd " was */ + } + kdb_grep_leading = 0; + if (*cp == '^') { + kdb_grep_leading = 1; + cp++; + } + len = strlen(cp); + kdb_grep_trailing = 0; + if (*(cp+len-1) == '$') { + kdb_grep_trailing = 1; + *(cp+len-1) = '\0'; + } + len = strlen(cp); + if (!len) + return; + if (len >= GREP_LEN) { + kdb_printf("search string too long\n"); + return; + } + strcpy(kdb_grep_string, cp); + kdb_grepping_flag++; + return; +} + +/* + * kdb_parse - Parse the command line, search the command table for a + * matching command and invoke the command function. This + * function may be called recursively, if it is, the second call + * will overwrite argv and cbuf. It is the caller's + * responsibility to save their argv if they recursively call + * kdb_parse(). + * Parameters: + * cmdstr The input command line to be parsed. + * regs The registers at the time kdb was entered. + * Returns: + * Zero for success, a kdb diagnostic if failure. + * Remarks: + * Limited to 20 tokens. + * + * Real rudimentary tokenization. Basically only whitespace + * is considered a token delimeter (but special consideration + * is taken of the '=' sign as used by the 'set' command). + * + * The algorithm used to tokenize the input string relies on + * there being at least one whitespace (or otherwise useless) + * character between tokens as the character immediately following + * the token is altered in-place to a null-byte to terminate the + * token string. + */ + +#define MAXARGC 20 + +int kdb_parse(const char *cmdstr) +{ + static char *argv[MAXARGC]; + static int argc; + static char cbuf[CMD_BUFLEN+2]; + char *cp; + char *cpp, quoted; + kdbtab_t *tp; + int i, escaped, ignore_errors = 0, check_grep; + + /* + * First tokenize the command string. + */ + cp = (char *)cmdstr; + kdb_grepping_flag = check_grep = 0; + + if (KDB_FLAG(CMD_INTERRUPT)) { + /* Previous command was interrupted, newline must not + * repeat the command */ + KDB_FLAG_CLEAR(CMD_INTERRUPT); + KDB_STATE_SET(PAGER); + argc = 0; /* no repeat */ + } + + if (*cp != '\n' && *cp != '\0') { + argc = 0; + cpp = cbuf; + while (*cp) { + /* skip whitespace */ + while (isspace(*cp)) + cp++; + if ((*cp == '\0') || (*cp == '\n') || + (*cp == '#' && !defcmd_in_progress)) + break; + /* special case: check for | grep pattern */ + if (*cp == '|') { + check_grep++; + break; + } + if (cpp >= cbuf + CMD_BUFLEN) { + kdb_printf("kdb_parse: command buffer " + "overflow, command ignored\n%s\n", + cmdstr); + return KDB_NOTFOUND; + } + if (argc >= MAXARGC - 1) { + kdb_printf("kdb_parse: too many arguments, " + "command ignored\n%s\n", cmdstr); + return KDB_NOTFOUND; + } + argv[argc++] = cpp; + escaped = 0; + quoted = '\0'; + /* Copy to next unquoted and unescaped + * whitespace or '=' */ + while (*cp && *cp != '\n' && + (escaped || quoted || !isspace(*cp))) { + if (cpp >= cbuf + CMD_BUFLEN) + break; + if (escaped) { + escaped = 0; + *cpp++ = *cp++; + continue; + } + if (*cp == '\\') { + escaped = 1; + ++cp; + continue; + } + if (*cp == quoted) + quoted = '\0'; + else if (*cp == '\'' || *cp == '"') + quoted = *cp; + *cpp = *cp++; + if (*cpp == '=' && !quoted) + break; + ++cpp; + } + *cpp++ = '\0'; /* Squash a ws or '=' character */ + } + } + if (!argc) + return 0; + if (check_grep) + parse_grep(cp); + if (defcmd_in_progress) { + int result = kdb_defcmd2(cmdstr, argv[0]); + if (!defcmd_in_progress) { + argc = 0; /* avoid repeat on endefcmd */ + *(argv[0]) = '\0'; + } + return result; + } + if (argv[0][0] == '-' && argv[0][1] && + (argv[0][1] < '0' || argv[0][1] > '9')) { + ignore_errors = 1; + ++argv[0]; + } + + for_each_kdbcmd(tp, i) { + if (tp->cmd_name) { + /* + * If this command is allowed to be abbreviated, + * check to see if this is it. + */ + + if (tp->cmd_minlen + && (strlen(argv[0]) <= tp->cmd_minlen)) { + if (strncmp(argv[0], + tp->cmd_name, + tp->cmd_minlen) == 0) { + break; + } + } + + if (strcmp(argv[0], tp->cmd_name) == 0) + break; + } + } + + /* + * If we don't find a command by this name, see if the first + * few characters of this match any of the known commands. + * e.g., md1c20 should match md. + */ + if (i == kdb_max_commands) { + for_each_kdbcmd(tp, i) { + if (tp->cmd_name) { + if (strncmp(argv[0], + tp->cmd_name, + strlen(tp->cmd_name)) == 0) { + break; + } + } + } + } + + if (i < kdb_max_commands) { + int result; + KDB_STATE_SET(CMD); + result = (*tp->cmd_func)(argc-1, (const char **)argv); + if (result && ignore_errors && result > KDB_CMD_GO) + result = 0; + KDB_STATE_CLEAR(CMD); + switch (tp->cmd_repeat) { + case KDB_REPEAT_NONE: + argc = 0; + if (argv[0]) + *(argv[0]) = '\0'; + break; + case KDB_REPEAT_NO_ARGS: + argc = 1; + if (argv[1]) + *(argv[1]) = '\0'; + break; + case KDB_REPEAT_WITH_ARGS: + break; + } + return result; + } + + /* + * If the input with which we were presented does not + * map to an existing command, attempt to parse it as an + * address argument and display the result. Useful for + * obtaining the address of a variable, or the nearest symbol + * to an address contained in a register. + */ + { + unsigned long value; + char *name = NULL; + long offset; + int nextarg = 0; + + if (kdbgetaddrarg(0, (const char **)argv, &nextarg, + &value, &offset, &name)) { + return KDB_NOTFOUND; + } + + kdb_printf("%s = ", argv[0]); + kdb_symbol_print(value, NULL, KDB_SP_DEFAULT); + kdb_printf("\n"); + return 0; + } +} + + +static int handle_ctrl_cmd(char *cmd) +{ +#define CTRL_P 16 +#define CTRL_N 14 + + /* initial situation */ + if (cmd_head == cmd_tail) + return 0; + switch (*cmd) { + case CTRL_P: + if (cmdptr != cmd_tail) + cmdptr = (cmdptr-1) % KDB_CMD_HISTORY_COUNT; + strncpy(cmd_cur, cmd_hist[cmdptr], CMD_BUFLEN); + return 1; + case CTRL_N: + if (cmdptr != cmd_head) + cmdptr = (cmdptr+1) % KDB_CMD_HISTORY_COUNT; + strncpy(cmd_cur, cmd_hist[cmdptr], CMD_BUFLEN); + return 1; + } + return 0; +} + +/* + * kdb_reboot - This function implements the 'reboot' command. Reboot + * the system immediately, or loop for ever on failure. + */ +static int kdb_reboot(int argc, const char **argv) +{ + emergency_restart(); + kdb_printf("Hmm, kdb_reboot did not reboot, spinning here\n"); + while (1) + cpu_relax(); + /* NOTREACHED */ + return 0; +} + +static void kdb_dumpregs(struct pt_regs *regs) +{ + int old_lvl = console_loglevel; + console_loglevel = 15; + show_regs(regs); + kdb_printf("\n"); + console_loglevel = old_lvl; +} + +void kdb_set_current_task(struct task_struct *p) +{ + kdb_current_task = p; + + if (kdb_task_has_cpu(p)) { + kdb_current_regs = KDB_TSKREGS(kdb_process_cpu(p)); + return; + } + kdb_current_regs = NULL; +} + +/* + * kdb_local - The main code for kdb. This routine is invoked on a + * specific processor, it is not global. The main kdb() routine + * ensures that only one processor at a time is in this routine. + * This code is called with the real reason code on the first + * entry to a kdb session, thereafter it is called with reason + * SWITCH, even if the user goes back to the original cpu. + * Inputs: + * reason The reason KDB was invoked + * error The hardware-defined error code + * regs The exception frame at time of fault/breakpoint. + * db_result Result code from the break or debug point. + * Returns: + * 0 KDB was invoked for an event which it wasn't responsible + * 1 KDB handled the event for which it was invoked. + * KDB_CMD_GO User typed 'go'. + * KDB_CMD_CPU User switched to another cpu. + * KDB_CMD_SS Single step. + * KDB_CMD_SSB Single step until branch. + */ +static int kdb_local(kdb_reason_t reason, int error, struct pt_regs *regs, + kdb_dbtrap_t db_result) +{ + char *cmdbuf; + int diag; + struct task_struct *kdb_current = + kdb_curr_task(raw_smp_processor_id()); + + KDB_DEBUG_STATE("kdb_local 1", reason); + kdb_go_count = 0; + if (reason == KDB_REASON_DEBUG) { + /* special case below */ + } else { + kdb_printf("\nEntering kdb (current=0x%p, pid %d) ", + kdb_current, kdb_current->pid); +#if defined(CONFIG_SMP) + kdb_printf("on processor %d ", raw_smp_processor_id()); +#endif + } + + switch (reason) { + case KDB_REASON_DEBUG: + { + /* + * If re-entering kdb after a single step + * command, don't print the message. + */ + switch (db_result) { + case KDB_DB_BPT: + kdb_printf("\nEntering kdb (0x%p, pid %d) ", + kdb_current, kdb_current->pid); +#if defined(CONFIG_SMP) + kdb_printf("on processor %d ", raw_smp_processor_id()); +#endif + kdb_printf("due to Debug @ " kdb_machreg_fmt "\n", + instruction_pointer(regs)); + break; + case KDB_DB_SSB: + /* + * In the midst of ssb command. Just return. + */ + KDB_DEBUG_STATE("kdb_local 3", reason); + return KDB_CMD_SSB; /* Continue with SSB command */ + + break; + case KDB_DB_SS: + break; + case KDB_DB_SSBPT: + KDB_DEBUG_STATE("kdb_local 4", reason); + return 1; /* kdba_db_trap did the work */ + default: + kdb_printf("kdb: Bad result from kdba_db_trap: %d\n", + db_result); + break; + } + + } + break; + case KDB_REASON_ENTER: + if (KDB_STATE(KEYBOARD)) + kdb_printf("due to Keyboard Entry\n"); + else + kdb_printf("due to KDB_ENTER()\n"); + break; + case KDB_REASON_KEYBOARD: + KDB_STATE_SET(KEYBOARD); + kdb_printf("due to Keyboard Entry\n"); + break; + case KDB_REASON_ENTER_SLAVE: + /* drop through, slaves only get released via cpu switch */ + case KDB_REASON_SWITCH: + kdb_printf("due to cpu switch\n"); + break; + case KDB_REASON_OOPS: + kdb_printf("Oops: %s\n", kdb_diemsg); + kdb_printf("due to oops @ " kdb_machreg_fmt "\n", + instruction_pointer(regs)); + kdb_dumpregs(regs); + break; + case KDB_REASON_NMI: + kdb_printf("due to NonMaskable Interrupt @ " + kdb_machreg_fmt "\n", + instruction_pointer(regs)); + kdb_dumpregs(regs); + break; + case KDB_REASON_SSTEP: + case KDB_REASON_BREAK: + kdb_printf("due to %s @ " kdb_machreg_fmt "\n", + reason == KDB_REASON_BREAK ? + "Breakpoint" : "SS trap", instruction_pointer(regs)); + /* + * Determine if this breakpoint is one that we + * are interested in. + */ + if (db_result != KDB_DB_BPT) { + kdb_printf("kdb: error return from kdba_bp_trap: %d\n", + db_result); + KDB_DEBUG_STATE("kdb_local 6", reason); + return 0; /* Not for us, dismiss it */ + } + break; + case KDB_REASON_RECURSE: + kdb_printf("due to Recursion @ " kdb_machreg_fmt "\n", + instruction_pointer(regs)); + break; + default: + kdb_printf("kdb: unexpected reason code: %d\n", reason); + KDB_DEBUG_STATE("kdb_local 8", reason); + return 0; /* Not for us, dismiss it */ + } + + while (1) { + /* + * Initialize pager context. + */ + kdb_nextline = 1; + KDB_STATE_CLEAR(SUPPRESS); + + cmdbuf = cmd_cur; + *cmdbuf = '\0'; + *(cmd_hist[cmd_head]) = '\0'; + + if (KDB_FLAG(ONLY_DO_DUMP)) { + /* kdb is off but a catastrophic error requires a dump. + * Take the dump and reboot. + * Turn on logging so the kdb output appears in the log + * buffer in the dump. + */ + const char *setargs[] = { "set", "LOGGING", "1" }; + kdb_set(2, setargs); + kdb_reboot(0, NULL); + /*NOTREACHED*/ + } + +do_full_getstr: +#if defined(CONFIG_SMP) + snprintf(kdb_prompt_str, CMD_BUFLEN, kdbgetenv("PROMPT"), + raw_smp_processor_id()); +#else + snprintf(kdb_prompt_str, CMD_BUFLEN, kdbgetenv("PROMPT")); +#endif + if (defcmd_in_progress) + strncat(kdb_prompt_str, "[defcmd]", CMD_BUFLEN); + + /* + * Fetch command from keyboard + */ + cmdbuf = kdb_getstr(cmdbuf, CMD_BUFLEN, kdb_prompt_str); + if (*cmdbuf != '\n') { + if (*cmdbuf < 32) { + if (cmdptr == cmd_head) { + strncpy(cmd_hist[cmd_head], cmd_cur, + CMD_BUFLEN); + *(cmd_hist[cmd_head] + + strlen(cmd_hist[cmd_head])-1) = '\0'; + } + if (!handle_ctrl_cmd(cmdbuf)) + *(cmd_cur+strlen(cmd_cur)-1) = '\0'; + cmdbuf = cmd_cur; + goto do_full_getstr; + } else { + strncpy(cmd_hist[cmd_head], cmd_cur, + CMD_BUFLEN); + } + + cmd_head = (cmd_head+1) % KDB_CMD_HISTORY_COUNT; + if (cmd_head == cmd_tail) + cmd_tail = (cmd_tail+1) % KDB_CMD_HISTORY_COUNT; + } + + cmdptr = cmd_head; + diag = kdb_parse(cmdbuf); + if (diag == KDB_NOTFOUND) { + kdb_printf("Unknown kdb command: '%s'\n", cmdbuf); + diag = 0; + } + if (diag == KDB_CMD_GO + || diag == KDB_CMD_CPU + || diag == KDB_CMD_SS + || diag == KDB_CMD_SSB + || diag == KDB_CMD_KGDB) + break; + + if (diag) + kdb_cmderror(diag); + } + KDB_DEBUG_STATE("kdb_local 9", diag); + return diag; +} + + +/* + * kdb_print_state - Print the state data for the current processor + * for debugging. + * Inputs: + * text Identifies the debug point + * value Any integer value to be printed, e.g. reason code. + */ +void kdb_print_state(const char *text, int value) +{ + kdb_printf("state: %s cpu %d value %d initial %d state %x\n", + text, raw_smp_processor_id(), value, kdb_initial_cpu, + kdb_state); +} + +/* + * kdb_main_loop - After initial setup and assignment of the + * controlling cpu, all cpus are in this loop. One cpu is in + * control and will issue the kdb prompt, the others will spin + * until 'go' or cpu switch. + * + * To get a consistent view of the kernel stacks for all + * processes, this routine is invoked from the main kdb code via + * an architecture specific routine. kdba_main_loop is + * responsible for making the kernel stacks consistent for all + * processes, there should be no difference between a blocked + * process and a running process as far as kdb is concerned. + * Inputs: + * reason The reason KDB was invoked + * error The hardware-defined error code + * reason2 kdb's current reason code. + * Initially error but can change + * acording to kdb state. + * db_result Result code from break or debug point. + * regs The exception frame at time of fault/breakpoint. + * should always be valid. + * Returns: + * 0 KDB was invoked for an event which it wasn't responsible + * 1 KDB handled the event for which it was invoked. + */ +int kdb_main_loop(kdb_reason_t reason, kdb_reason_t reason2, int error, + kdb_dbtrap_t db_result, struct pt_regs *regs) +{ + int result = 1; + /* Stay in kdb() until 'go', 'ss[b]' or an error */ + while (1) { + /* + * All processors except the one that is in control + * will spin here. + */ + KDB_DEBUG_STATE("kdb_main_loop 1", reason); + while (KDB_STATE(HOLD_CPU)) { + /* state KDB is turned off by kdb_cpu to see if the + * other cpus are still live, each cpu in this loop + * turns it back on. + */ + if (!KDB_STATE(KDB)) + KDB_STATE_SET(KDB); + } + + KDB_STATE_CLEAR(SUPPRESS); + KDB_DEBUG_STATE("kdb_main_loop 2", reason); + if (KDB_STATE(LEAVING)) + break; /* Another cpu said 'go' */ + /* Still using kdb, this processor is in control */ + result = kdb_local(reason2, error, regs, db_result); + KDB_DEBUG_STATE("kdb_main_loop 3", result); + + if (result == KDB_CMD_CPU) + break; + + if (result == KDB_CMD_SS) { + KDB_STATE_SET(DOING_SS); + break; + } + + if (result == KDB_CMD_SSB) { + KDB_STATE_SET(DOING_SS); + KDB_STATE_SET(DOING_SSB); + break; + } + + if (result == KDB_CMD_KGDB) { + if (!(KDB_STATE(DOING_KGDB) || KDB_STATE(DOING_KGDB2))) + kdb_printf("Entering please attach debugger " + "or use $D#44+ or $3#33\n"); + break; + } + if (result && result != 1 && result != KDB_CMD_GO) + kdb_printf("\nUnexpected kdb_local return code %d\n", + result); + KDB_DEBUG_STATE("kdb_main_loop 4", reason); + break; + } + if (KDB_STATE(DOING_SS)) + KDB_STATE_CLEAR(SSBPT); + + return result; +} + +/* + * kdb_mdr - This function implements the guts of the 'mdr', memory + * read command. + * mdr <addr arg>,<byte count> + * Inputs: + * addr Start address + * count Number of bytes + * Returns: + * Always 0. Any errors are detected and printed by kdb_getarea. + */ +static int kdb_mdr(unsigned long addr, unsigned int count) +{ + unsigned char c; + while (count--) { + if (kdb_getarea(c, addr)) + return 0; + kdb_printf("%02x", c); + addr++; + } + kdb_printf("\n"); + return 0; +} + +/* + * kdb_md - This function implements the 'md', 'md1', 'md2', 'md4', + * 'md8' 'mdr' and 'mds' commands. + * + * md|mds [<addr arg> [<line count> [<radix>]]] + * mdWcN [<addr arg> [<line count> [<radix>]]] + * where W = is the width (1, 2, 4 or 8) and N is the count. + * for eg., md1c20 reads 20 bytes, 1 at a time. + * mdr <addr arg>,<byte count> + */ +static void kdb_md_line(const char *fmtstr, unsigned long addr, + int symbolic, int nosect, int bytesperword, + int num, int repeat, int phys) +{ + /* print just one line of data */ + kdb_symtab_t symtab; + char cbuf[32]; + char *c = cbuf; + int i; + unsigned long word; + + memset(cbuf, '\0', sizeof(cbuf)); + if (phys) + kdb_printf("phys " kdb_machreg_fmt0 " ", addr); + else + kdb_printf(kdb_machreg_fmt0 " ", addr); + + for (i = 0; i < num && repeat--; i++) { + if (phys) { + if (kdb_getphysword(&word, addr, bytesperword)) + break; + } else if (kdb_getword(&word, addr, bytesperword)) + break; + kdb_printf(fmtstr, word); + if (symbolic) + kdbnearsym(word, &symtab); + else + memset(&symtab, 0, sizeof(symtab)); + if (symtab.sym_name) { + kdb_symbol_print(word, &symtab, 0); + if (!nosect) { + kdb_printf("\n"); + kdb_printf(" %s %s " + kdb_machreg_fmt " " + kdb_machreg_fmt " " + kdb_machreg_fmt, symtab.mod_name, + symtab.sec_name, symtab.sec_start, + symtab.sym_start, symtab.sym_end); + } + addr += bytesperword; + } else { + union { + u64 word; + unsigned char c[8]; + } wc; + unsigned char *cp; +#ifdef __BIG_ENDIAN + cp = wc.c + 8 - bytesperword; +#else + cp = wc.c; +#endif + wc.word = word; +#define printable_char(c) \ + ({unsigned char __c = c; isascii(__c) && isprint(__c) ? __c : '.'; }) + switch (bytesperword) { + case 8: + *c++ = printable_char(*cp++); + *c++ = printable_char(*cp++); + *c++ = printable_char(*cp++); + *c++ = printable_char(*cp++); + addr += 4; + case 4: + *c++ = printable_char(*cp++); + *c++ = printable_char(*cp++); + addr += 2; + case 2: + *c++ = printable_char(*cp++); + addr++; + case 1: + *c++ = printable_char(*cp++); + addr++; + break; + } +#undef printable_char + } + } + kdb_printf("%*s %s\n", (int)((num-i)*(2*bytesperword + 1)+1), + " ", cbuf); +} + +static int kdb_md(int argc, const char **argv) +{ + static unsigned long last_addr; + static int last_radix, last_bytesperword, last_repeat; + int radix = 16, mdcount = 8, bytesperword = KDB_WORD_SIZE, repeat; + int nosect = 0; + char fmtchar, fmtstr[64]; + unsigned long addr; + unsigned long word; + long offset = 0; + int symbolic = 0; + int valid = 0; + int phys = 0; + + kdbgetintenv("MDCOUNT", &mdcount); + kdbgetintenv("RADIX", &radix); + kdbgetintenv("BYTESPERWORD", &bytesperword); + + /* Assume 'md <addr>' and start with environment values */ + repeat = mdcount * 16 / bytesperword; + + if (strcmp(argv[0], "mdr") == 0) { + if (argc != 2) + return KDB_ARGCOUNT; + valid = 1; + } else if (isdigit(argv[0][2])) { + bytesperword = (int)(argv[0][2] - '0'); + if (bytesperword == 0) { + bytesperword = last_bytesperword; + if (bytesperword == 0) + bytesperword = 4; + } + last_bytesperword = bytesperword; + repeat = mdcount * 16 / bytesperword; + if (!argv[0][3]) + valid = 1; + else if (argv[0][3] == 'c' && argv[0][4]) { + char *p; + repeat = simple_strtoul(argv[0] + 4, &p, 10); + mdcount = ((repeat * bytesperword) + 15) / 16; + valid = !*p; + } + last_repeat = repeat; + } else if (strcmp(argv[0], "md") == 0) + valid = 1; + else if (strcmp(argv[0], "mds") == 0) + valid = 1; + else if (strcmp(argv[0], "mdp") == 0) { + phys = valid = 1; + } + if (!valid) + return KDB_NOTFOUND; + + if (argc == 0) { + if (last_addr == 0) + return KDB_ARGCOUNT; + addr = last_addr; + radix = last_radix; + bytesperword = last_bytesperword; + repeat = last_repeat; + mdcount = ((repeat * bytesperword) + 15) / 16; + } + + if (argc) { + unsigned long val; + int diag, nextarg = 1; + diag = kdbgetaddrarg(argc, argv, &nextarg, &addr, + &offset, NULL); + if (diag) + return diag; + if (argc > nextarg+2) + return KDB_ARGCOUNT; + + if (argc >= nextarg) { + diag = kdbgetularg(argv[nextarg], &val); + if (!diag) { + mdcount = (int) val; + repeat = mdcount * 16 / bytesperword; + } + } + if (argc >= nextarg+1) { + diag = kdbgetularg(argv[nextarg+1], &val); + if (!diag) + radix = (int) val; + } + } + + if (strcmp(argv[0], "mdr") == 0) + return kdb_mdr(addr, mdcount); + + switch (radix) { + case 10: + fmtchar = 'd'; + break; + case 16: + fmtchar = 'x'; + break; + case 8: + fmtchar = 'o'; + break; + default: + return KDB_BADRADIX; + } + + last_radix = radix; + + if (bytesperword > KDB_WORD_SIZE) + return KDB_BADWIDTH; + + switch (bytesperword) { + case 8: + sprintf(fmtstr, "%%16.16l%c ", fmtchar); + break; + case 4: + sprintf(fmtstr, "%%8.8l%c ", fmtchar); + break; + case 2: + sprintf(fmtstr, "%%4.4l%c ", fmtchar); + break; + case 1: + sprintf(fmtstr, "%%2.2l%c ", fmtchar); + break; + default: + return KDB_BADWIDTH; + } + + last_repeat = repeat; + last_bytesperword = bytesperword; + + if (strcmp(argv[0], "mds") == 0) { + symbolic = 1; + /* Do not save these changes as last_*, they are temporary mds + * overrides. + */ + bytesperword = KDB_WORD_SIZE; + repeat = mdcount; + kdbgetintenv("NOSECT", &nosect); + } + + /* Round address down modulo BYTESPERWORD */ + + addr &= ~(bytesperword-1); + + while (repeat > 0) { + unsigned long a; + int n, z, num = (symbolic ? 1 : (16 / bytesperword)); + + if (KDB_FLAG(CMD_INTERRUPT)) + return 0; + for (a = addr, z = 0; z < repeat; a += bytesperword, ++z) { + if (phys) { + if (kdb_getphysword(&word, a, bytesperword) + || word) + break; + } else if (kdb_getword(&word, a, bytesperword) || word) + break; + } + n = min(num, repeat); + kdb_md_line(fmtstr, addr, symbolic, nosect, bytesperword, + num, repeat, phys); + addr += bytesperword * n; + repeat -= n; + z = (z + num - 1) / num; + if (z > 2) { + int s = num * (z-2); + kdb_printf(kdb_machreg_fmt0 "-" kdb_machreg_fmt0 + " zero suppressed\n", + addr, addr + bytesperword * s - 1); + addr += bytesperword * s; + repeat -= s; + } + } + last_addr = addr; + + return 0; +} + +/* + * kdb_mm - This function implements the 'mm' command. + * mm address-expression new-value + * Remarks: + * mm works on machine words, mmW works on bytes. + */ +static int kdb_mm(int argc, const char **argv) +{ + int diag; + unsigned long addr; + long offset = 0; + unsigned long contents; + int nextarg; + int width; + + if (argv[0][2] && !isdigit(argv[0][2])) + return KDB_NOTFOUND; + + if (argc < 2) + return KDB_ARGCOUNT; + + nextarg = 1; + diag = kdbgetaddrarg(argc, argv, &nextarg, &addr, &offset, NULL); + if (diag) + return diag; + + if (nextarg > argc) + return KDB_ARGCOUNT; + diag = kdbgetaddrarg(argc, argv, &nextarg, &contents, NULL, NULL); + if (diag) + return diag; + + if (nextarg != argc + 1) + return KDB_ARGCOUNT; + + width = argv[0][2] ? (argv[0][2] - '0') : (KDB_WORD_SIZE); + diag = kdb_putword(addr, contents, width); + if (diag) + return diag; + + kdb_printf(kdb_machreg_fmt " = " kdb_machreg_fmt "\n", addr, contents); + + return 0; +} + +/* + * kdb_go - This function implements the 'go' command. + * go [address-expression] + */ +static int kdb_go(int argc, const char **argv) +{ + unsigned long addr; + int diag; + int nextarg; + long offset; + + if (argc == 1) { + if (raw_smp_processor_id() != kdb_initial_cpu) { + kdb_printf("go <address> must be issued from the " + "initial cpu, do cpu %d first\n", + kdb_initial_cpu); + return KDB_ARGCOUNT; + } + nextarg = 1; + diag = kdbgetaddrarg(argc, argv, &nextarg, + &addr, &offset, NULL); + if (diag) + return diag; + } else if (argc) { + return KDB_ARGCOUNT; + } + + diag = KDB_CMD_GO; + if (KDB_FLAG(CATASTROPHIC)) { + kdb_printf("Catastrophic error detected\n"); + kdb_printf("kdb_continue_catastrophic=%d, ", + kdb_continue_catastrophic); + if (kdb_continue_catastrophic == 0 && kdb_go_count++ == 0) { + kdb_printf("type go a second time if you really want " + "to continue\n"); + return 0; + } + if (kdb_continue_catastrophic == 2) { + kdb_printf("forcing reboot\n"); + kdb_reboot(0, NULL); + } + kdb_printf("attempting to continue\n"); + } + return diag; +} + +/* + * kdb_rd - This function implements the 'rd' command. + */ +static int kdb_rd(int argc, const char **argv) +{ + int diag = kdb_check_regs(); + if (diag) + return diag; + + kdb_dumpregs(kdb_current_regs); + return 0; +} + +/* + * kdb_rm - This function implements the 'rm' (register modify) command. + * rm register-name new-contents + * Remarks: + * Currently doesn't allow modification of control or + * debug registers. + */ +static int kdb_rm(int argc, const char **argv) +{ + int diag; + int ind = 0; + unsigned long contents; + + if (argc != 2) + return KDB_ARGCOUNT; + /* + * Allow presence or absence of leading '%' symbol. + */ + if (argv[1][0] == '%') + ind = 1; + + diag = kdbgetularg(argv[2], &contents); + if (diag) + return diag; + + diag = kdb_check_regs(); + if (diag) + return diag; + kdb_printf("ERROR: Register set currently not implemented\n"); + return 0; +} + +#if defined(CONFIG_MAGIC_SYSRQ) +/* + * kdb_sr - This function implements the 'sr' (SYSRQ key) command + * which interfaces to the soi-disant MAGIC SYSRQ functionality. + * sr <magic-sysrq-code> + */ +static int kdb_sr(int argc, const char **argv) +{ + if (argc != 1) + return KDB_ARGCOUNT; + sysrq_toggle_support(1); + handle_sysrq(*argv[1], NULL); + + return 0; +} +#endif /* CONFIG_MAGIC_SYSRQ */ + +/* + * kdb_ef - This function implements the 'regs' (display exception + * frame) command. This command takes an address and expects to + * find an exception frame at that address, formats and prints + * it. + * regs address-expression + * Remarks: + * Not done yet. + */ +static int kdb_ef(int argc, const char **argv) +{ + int diag; + unsigned long addr; + long offset; + int nextarg; + + if (argc != 1) + return KDB_ARGCOUNT; + + nextarg = 1; + diag = kdbgetaddrarg(argc, argv, &nextarg, &addr, &offset, NULL); + if (diag) + return diag; + show_regs((struct pt_regs *)addr); + return 0; +} + +#if defined(CONFIG_MODULES) +/* modules using other modules */ +struct module_use { + struct list_head list; + struct module *module_which_uses; +}; + +/* + * kdb_lsmod - This function implements the 'lsmod' command. Lists + * currently loaded kernel modules. + * Mostly taken from userland lsmod. + */ +static int kdb_lsmod(int argc, const char **argv) +{ + struct module *mod; + + if (argc != 0) + return KDB_ARGCOUNT; + + kdb_printf("Module Size modstruct Used by\n"); + list_for_each_entry(mod, kdb_modules, list) { + + kdb_printf("%-20s%8u 0x%p ", mod->name, + mod->core_size, (void *)mod); +#ifdef CONFIG_MODULE_UNLOAD + kdb_printf("%4d ", module_refcount(mod)); +#endif + if (mod->state == MODULE_STATE_GOING) + kdb_printf(" (Unloading)"); + else if (mod->state == MODULE_STATE_COMING) + kdb_printf(" (Loading)"); + else + kdb_printf(" (Live)"); + +#ifdef CONFIG_MODULE_UNLOAD + { + struct module_use *use; + kdb_printf(" [ "); + list_for_each_entry(use, &mod->modules_which_use_me, + list) + kdb_printf("%s ", use->module_which_uses->name); + kdb_printf("]\n"); + } +#endif + } + + return 0; +} + +#endif /* CONFIG_MODULES */ + +/* + * kdb_env - This function implements the 'env' command. Display the + * current environment variables. + */ + +static int kdb_env(int argc, const char **argv) +{ + int i; + + for (i = 0; i < __nenv; i++) { + if (__env[i]) + kdb_printf("%s\n", __env[i]); + } + + if (KDB_DEBUG(MASK)) + kdb_printf("KDBFLAGS=0x%x\n", kdb_flags); + + return 0; +} + +#ifdef CONFIG_PRINTK +/* + * kdb_dmesg - This function implements the 'dmesg' command to display + * the contents of the syslog buffer. + * dmesg [lines] [adjust] + */ +static int kdb_dmesg(int argc, const char **argv) +{ + char *syslog_data[4], *start, *end, c = '\0', *p; + int diag, logging, logsize, lines = 0, adjust = 0, n; + + if (argc > 2) + return KDB_ARGCOUNT; + if (argc) { + char *cp; + lines = simple_strtol(argv[1], &cp, 0); + if (*cp) + lines = 0; + if (argc > 1) { + adjust = simple_strtoul(argv[2], &cp, 0); + if (*cp || adjust < 0) + adjust = 0; + } + } + + /* disable LOGGING if set */ + diag = kdbgetintenv("LOGGING", &logging); + if (!diag && logging) { + const char *setargs[] = { "set", "LOGGING", "0" }; + kdb_set(2, setargs); + } + + /* syslog_data[0,1] physical start, end+1. syslog_data[2,3] + * logical start, end+1. */ + kdb_syslog_data(syslog_data); + if (syslog_data[2] == syslog_data[3]) + return 0; + logsize = syslog_data[1] - syslog_data[0]; + start = syslog_data[2]; + end = syslog_data[3]; +#define KDB_WRAP(p) (((p - syslog_data[0]) % logsize) + syslog_data[0]) + for (n = 0, p = start; p < end; ++p) { + c = *KDB_WRAP(p); + if (c == '\n') + ++n; + } + if (c != '\n') + ++n; + if (lines < 0) { + if (adjust >= n) + kdb_printf("buffer only contains %d lines, nothing " + "printed\n", n); + else if (adjust - lines >= n) + kdb_printf("buffer only contains %d lines, last %d " + "lines printed\n", n, n - adjust); + if (adjust) { + for (; start < end && adjust; ++start) { + if (*KDB_WRAP(start) == '\n') + --adjust; + } + if (start < end) + ++start; + } + for (p = start; p < end && lines; ++p) { + if (*KDB_WRAP(p) == '\n') + ++lines; + } + end = p; + } else if (lines > 0) { + int skip = n - (adjust + lines); + if (adjust >= n) { + kdb_printf("buffer only contains %d lines, " + "nothing printed\n", n); + skip = n; + } else if (skip < 0) { + lines += skip; + skip = 0; + kdb_printf("buffer only contains %d lines, first " + "%d lines printed\n", n, lines); + } + for (; start < end && skip; ++start) { + if (*KDB_WRAP(start) == '\n') + --skip; + } + for (p = start; p < end && lines; ++p) { + if (*KDB_WRAP(p) == '\n') + --lines; + } + end = p; + } + /* Do a line at a time (max 200 chars) to reduce protocol overhead */ + c = '\n'; + while (start != end) { + char buf[201]; + p = buf; + if (KDB_FLAG(CMD_INTERRUPT)) + return 0; + while (start < end && (c = *KDB_WRAP(start)) && + (p - buf) < sizeof(buf)-1) { + ++start; + *p++ = c; + if (c == '\n') + break; + } + *p = '\0'; + kdb_printf("%s", buf); + } + if (c != '\n') + kdb_printf("\n"); + + return 0; +} +#endif /* CONFIG_PRINTK */ +/* + * kdb_cpu - This function implements the 'cpu' command. + * cpu [<cpunum>] + * Returns: + * KDB_CMD_CPU for success, a kdb diagnostic if error + */ +static void kdb_cpu_status(void) +{ + int i, start_cpu, first_print = 1; + char state, prev_state = '?'; + + kdb_printf("Currently on cpu %d\n", raw_smp_processor_id()); + kdb_printf("Available cpus: "); + for (start_cpu = -1, i = 0; i < NR_CPUS; i++) { + if (!cpu_online(i)) { + state = 'F'; /* cpu is offline */ + } else { + state = ' '; /* cpu is responding to kdb */ + if (kdb_task_state_char(KDB_TSK(i)) == 'I') + state = 'I'; /* idle task */ + } + if (state != prev_state) { + if (prev_state != '?') { + if (!first_print) + kdb_printf(", "); + first_print = 0; + kdb_printf("%d", start_cpu); + if (start_cpu < i-1) + kdb_printf("-%d", i-1); + if (prev_state != ' ') + kdb_printf("(%c)", prev_state); + } + prev_state = state; + start_cpu = i; + } + } + /* print the trailing cpus, ignoring them if they are all offline */ + if (prev_state != 'F') { + if (!first_print) + kdb_printf(", "); + kdb_printf("%d", start_cpu); + if (start_cpu < i-1) + kdb_printf("-%d", i-1); + if (prev_state != ' ') + kdb_printf("(%c)", prev_state); + } + kdb_printf("\n"); +} + +static int kdb_cpu(int argc, const char **argv) +{ + unsigned long cpunum; + int diag; + + if (argc == 0) { + kdb_cpu_status(); + return 0; + } + + if (argc != 1) + return KDB_ARGCOUNT; + + diag = kdbgetularg(argv[1], &cpunum); + if (diag) + return diag; + + /* + * Validate cpunum + */ + if ((cpunum > NR_CPUS) || !cpu_online(cpunum)) + return KDB_BADCPUNUM; + + dbg_switch_cpu = cpunum; + + /* + * Switch to other cpu + */ + return KDB_CMD_CPU; +} + +/* The user may not realize that ps/bta with no parameters does not print idle + * or sleeping system daemon processes, so tell them how many were suppressed. + */ +void kdb_ps_suppressed(void) +{ + int idle = 0, daemon = 0; + unsigned long mask_I = kdb_task_state_string("I"), + mask_M = kdb_task_state_string("M"); + unsigned long cpu; + const struct task_struct *p, *g; + for_each_online_cpu(cpu) { + p = kdb_curr_task(cpu); + if (kdb_task_state(p, mask_I)) + ++idle; + } + kdb_do_each_thread(g, p) { + if (kdb_task_state(p, mask_M)) + ++daemon; + } kdb_while_each_thread(g, p); + if (idle || daemon) { + if (idle) + kdb_printf("%d idle process%s (state I)%s\n", + idle, idle == 1 ? "" : "es", + daemon ? " and " : ""); + if (daemon) + kdb_printf("%d sleeping system daemon (state M) " + "process%s", daemon, + daemon == 1 ? "" : "es"); + kdb_printf(" suppressed,\nuse 'ps A' to see all.\n"); + } +} + +/* + * kdb_ps - This function implements the 'ps' command which shows a + * list of the active processes. + * ps [DRSTCZEUIMA] All processes, optionally filtered by state + */ +void kdb_ps1(const struct task_struct *p) +{ + int cpu; + unsigned long tmp; + + if (!p || probe_kernel_read(&tmp, (char *)p, sizeof(unsigned long))) + return; + + cpu = kdb_process_cpu(p); + kdb_printf("0x%p %8d %8d %d %4d %c 0x%p %c%s\n", + (void *)p, p->pid, p->parent->pid, + kdb_task_has_cpu(p), kdb_process_cpu(p), + kdb_task_state_char(p), + (void *)(&p->thread), + p == kdb_curr_task(raw_smp_processor_id()) ? '*' : ' ', + p->comm); + if (kdb_task_has_cpu(p)) { + if (!KDB_TSK(cpu)) { + kdb_printf(" Error: no saved data for this cpu\n"); + } else { + if (KDB_TSK(cpu) != p) + kdb_printf(" Error: does not match running " + "process table (0x%p)\n", KDB_TSK(cpu)); + } + } +} + +static int kdb_ps(int argc, const char **argv) +{ + struct task_struct *g, *p; + unsigned long mask, cpu; + + if (argc == 0) + kdb_ps_suppressed(); + kdb_printf("%-*s Pid Parent [*] cpu State %-*s Command\n", + (int)(2*sizeof(void *))+2, "Task Addr", + (int)(2*sizeof(void *))+2, "Thread"); + mask = kdb_task_state_string(argc ? argv[1] : NULL); + /* Run the active tasks first */ + for_each_online_cpu(cpu) { + if (KDB_FLAG(CMD_INTERRUPT)) + return 0; + p = kdb_curr_task(cpu); + if (kdb_task_state(p, mask)) + kdb_ps1(p); + } + kdb_printf("\n"); + /* Now the real tasks */ + kdb_do_each_thread(g, p) { + if (KDB_FLAG(CMD_INTERRUPT)) + return 0; + if (kdb_task_state(p, mask)) + kdb_ps1(p); + } kdb_while_each_thread(g, p); + + return 0; +} + +/* + * kdb_pid - This function implements the 'pid' command which switches + * the currently active process. + * pid [<pid> | R] + */ +static int kdb_pid(int argc, const char **argv) +{ + struct task_struct *p; + unsigned long val; + int diag; + + if (argc > 1) + return KDB_ARGCOUNT; + + if (argc) { + if (strcmp(argv[1], "R") == 0) { + p = KDB_TSK(kdb_initial_cpu); + } else { + diag = kdbgetularg(argv[1], &val); + if (diag) + return KDB_BADINT; + + p = find_task_by_pid_ns((pid_t)val, &init_pid_ns); + if (!p) { + kdb_printf("No task with pid=%d\n", (pid_t)val); + return 0; + } + } + kdb_set_current_task(p); + } + kdb_printf("KDB current process is %s(pid=%d)\n", + kdb_current_task->comm, + kdb_current_task->pid); + + return 0; +} + +/* + * kdb_ll - This function implements the 'll' command which follows a + * linked list and executes an arbitrary command for each + * element. + */ +static int kdb_ll(int argc, const char **argv) +{ + int diag; + unsigned long addr; + long offset = 0; + unsigned long va; + unsigned long linkoffset; + int nextarg; + const char *command; + + if (argc != 3) + return KDB_ARGCOUNT; + + nextarg = 1; + diag = kdbgetaddrarg(argc, argv, &nextarg, &addr, &offset, NULL); + if (diag) + return diag; + + diag = kdbgetularg(argv[2], &linkoffset); + if (diag) + return diag; + + /* + * Using the starting address as + * the first element in the list, and assuming that + * the list ends with a null pointer. + */ + + va = addr; + command = kdb_strdup(argv[3], GFP_KDB); + if (!command) { + kdb_printf("%s: cannot duplicate command\n", __func__); + return 0; + } + /* Recursive use of kdb_parse, do not use argv after this point */ + argv = NULL; + + while (va) { + char buf[80]; + + sprintf(buf, "%s " kdb_machreg_fmt "\n", command, va); + diag = kdb_parse(buf); + if (diag) + return diag; + + addr = va + linkoffset; + if (kdb_getword(&va, addr, sizeof(va))) + return 0; + } + kfree(command); + + return 0; +} + +static int kdb_kgdb(int argc, const char **argv) +{ + return KDB_CMD_KGDB; +} + +/* + * kdb_help - This function implements the 'help' and '?' commands. + */ +static int kdb_help(int argc, const char **argv) +{ + kdbtab_t *kt; + int i; + + kdb_printf("%-15.15s %-20.20s %s\n", "Command", "Usage", "Description"); + kdb_printf("-----------------------------" + "-----------------------------\n"); + for_each_kdbcmd(kt, i) { + if (kt->cmd_name) + kdb_printf("%-15.15s %-20.20s %s\n", kt->cmd_name, + kt->cmd_usage, kt->cmd_help); + if (KDB_FLAG(CMD_INTERRUPT)) + return 0; + } + return 0; +} + +/* + * kdb_kill - This function implements the 'kill' commands. + */ +static int kdb_kill(int argc, const char **argv) +{ + long sig, pid; + char *endp; + struct task_struct *p; + struct siginfo info; + + if (argc != 2) + return KDB_ARGCOUNT; + + sig = simple_strtol(argv[1], &endp, 0); + if (*endp) + return KDB_BADINT; + if (sig >= 0) { + kdb_printf("Invalid signal parameter.<-signal>\n"); + return 0; + } + sig = -sig; + + pid = simple_strtol(argv[2], &endp, 0); + if (*endp) + return KDB_BADINT; + if (pid <= 0) { + kdb_printf("Process ID must be large than 0.\n"); + return 0; + } + + /* Find the process. */ + p = find_task_by_pid_ns(pid, &init_pid_ns); + if (!p) { + kdb_printf("The specified process isn't found.\n"); + return 0; + } + p = p->group_leader; + info.si_signo = sig; + info.si_errno = 0; + info.si_code = SI_USER; + info.si_pid = pid; /* same capabilities as process being signalled */ + info.si_uid = 0; /* kdb has root authority */ + kdb_send_sig_info(p, &info); + return 0; +} + +struct kdb_tm { + int tm_sec; /* seconds */ + int tm_min; /* minutes */ + int tm_hour; /* hours */ + int tm_mday; /* day of the month */ + int tm_mon; /* month */ + int tm_year; /* year */ +}; + +static void kdb_gmtime(struct timespec *tv, struct kdb_tm *tm) +{ + /* This will work from 1970-2099, 2100 is not a leap year */ + static int mon_day[] = { 31, 29, 31, 30, 31, 30, 31, + 31, 30, 31, 30, 31 }; + memset(tm, 0, sizeof(*tm)); + tm->tm_sec = tv->tv_sec % (24 * 60 * 60); + tm->tm_mday = tv->tv_sec / (24 * 60 * 60) + + (2 * 365 + 1); /* shift base from 1970 to 1968 */ + tm->tm_min = tm->tm_sec / 60 % 60; + tm->tm_hour = tm->tm_sec / 60 / 60; + tm->tm_sec = tm->tm_sec % 60; + tm->tm_year = 68 + 4*(tm->tm_mday / (4*365+1)); + tm->tm_mday %= (4*365+1); + mon_day[1] = 29; + while (tm->tm_mday >= mon_day[tm->tm_mon]) { + tm->tm_mday -= mon_day[tm->tm_mon]; + if (++tm->tm_mon == 12) { + tm->tm_mon = 0; + ++tm->tm_year; + mon_day[1] = 28; + } + } + ++tm->tm_mday; +} + +/* + * Most of this code has been lifted from kernel/timer.c::sys_sysinfo(). + * I cannot call that code directly from kdb, it has an unconditional + * cli()/sti() and calls routines that take locks which can stop the debugger. + */ +static void kdb_sysinfo(struct sysinfo *val) +{ + struct timespec uptime; + do_posix_clock_monotonic_gettime(&uptime); + memset(val, 0, sizeof(*val)); + val->uptime = uptime.tv_sec; + val->loads[0] = avenrun[0]; + val->loads[1] = avenrun[1]; + val->loads[2] = avenrun[2]; + val->procs = nr_threads-1; + si_meminfo(val); + + return; +} + +/* + * kdb_summary - This function implements the 'summary' command. + */ +static int kdb_summary(int argc, const char **argv) +{ + struct kdb_tm tm; + struct sysinfo val; + + if (argc) + return KDB_ARGCOUNT; + + kdb_printf("sysname %s\n", init_uts_ns.name.sysname); + kdb_printf("release %s\n", init_uts_ns.name.release); + kdb_printf("version %s\n", init_uts_ns.name.version); + kdb_printf("machine %s\n", init_uts_ns.name.machine); + kdb_printf("nodename %s\n", init_uts_ns.name.nodename); + kdb_printf("domainname %s\n", init_uts_ns.name.domainname); + kdb_printf("ccversion %s\n", __stringify(CCVERSION)); + + kdb_gmtime(&xtime, &tm); + kdb_printf("date %04d-%02d-%02d %02d:%02d:%02d " + "tz_minuteswest %d\n", + 1900+tm.tm_year, tm.tm_mon+1, tm.tm_mday, + tm.tm_hour, tm.tm_min, tm.tm_sec, + sys_tz.tz_minuteswest); + + kdb_sysinfo(&val); + kdb_printf("uptime "); + if (val.uptime > (24*60*60)) { + int days = val.uptime / (24*60*60); + val.uptime %= (24*60*60); + kdb_printf("%d day%s ", days, days == 1 ? "" : "s"); + } + kdb_printf("%02ld:%02ld\n", val.uptime/(60*60), (val.uptime/60)%60); + + /* lifted from fs/proc/proc_misc.c::loadavg_read_proc() */ + +#define LOAD_INT(x) ((x) >> FSHIFT) +#define LOAD_FRAC(x) LOAD_INT(((x) & (FIXED_1-1)) * 100) + kdb_printf("load avg %ld.%02ld %ld.%02ld %ld.%02ld\n", + LOAD_INT(val.loads[0]), LOAD_FRAC(val.loads[0]), + LOAD_INT(val.loads[1]), LOAD_FRAC(val.loads[1]), + LOAD_INT(val.loads[2]), LOAD_FRAC(val.loads[2])); +#undef LOAD_INT +#undef LOAD_FRAC + /* Display in kilobytes */ +#define K(x) ((x) << (PAGE_SHIFT - 10)) + kdb_printf("\nMemTotal: %8lu kB\nMemFree: %8lu kB\n" + "Buffers: %8lu kB\n", + val.totalram, val.freeram, val.bufferram); + return 0; +} + +/* + * kdb_per_cpu - This function implements the 'per_cpu' command. + */ +static int kdb_per_cpu(int argc, const char **argv) +{ + char buf[256], fmtstr[64]; + kdb_symtab_t symtab; + cpumask_t suppress = CPU_MASK_NONE; + int cpu, diag; + unsigned long addr, val, bytesperword = 0, whichcpu = ~0UL; + + if (argc < 1 || argc > 3) + return KDB_ARGCOUNT; + + snprintf(buf, sizeof(buf), "per_cpu__%s", argv[1]); + if (!kdbgetsymval(buf, &symtab)) { + kdb_printf("%s is not a per_cpu variable\n", argv[1]); + return KDB_BADADDR; + } + if (argc >= 2) { + diag = kdbgetularg(argv[2], &bytesperword); + if (diag) + return diag; + } + if (!bytesperword) + bytesperword = KDB_WORD_SIZE; + else if (bytesperword > KDB_WORD_SIZE) + return KDB_BADWIDTH; + sprintf(fmtstr, "%%0%dlx ", (int)(2*bytesperword)); + if (argc >= 3) { + diag = kdbgetularg(argv[3], &whichcpu); + if (diag) + return diag; + if (!cpu_online(whichcpu)) { + kdb_printf("cpu %ld is not online\n", whichcpu); + return KDB_BADCPUNUM; + } + } + + /* Most architectures use __per_cpu_offset[cpu], some use + * __per_cpu_offset(cpu), smp has no __per_cpu_offset. + */ +#ifdef __per_cpu_offset +#define KDB_PCU(cpu) __per_cpu_offset(cpu) +#else +#ifdef CONFIG_SMP +#define KDB_PCU(cpu) __per_cpu_offset[cpu] +#else +#define KDB_PCU(cpu) 0 +#endif +#endif + + for_each_online_cpu(cpu) { + if (whichcpu != ~0UL && whichcpu != cpu) + continue; + addr = symtab.sym_start + KDB_PCU(cpu); + diag = kdb_getword(&val, addr, bytesperword); + if (diag) { + kdb_printf("%5d " kdb_bfd_vma_fmt0 " - unable to " + "read, diag=%d\n", cpu, addr, diag); + continue; + } +#ifdef CONFIG_SMP + if (!val) { + cpu_set(cpu, suppress); + continue; + } +#endif /* CONFIG_SMP */ + kdb_printf("%5d ", cpu); + kdb_md_line(fmtstr, addr, + bytesperword == KDB_WORD_SIZE, + 1, bytesperword, 1, 1, 0); + } + if (cpus_weight(suppress) == 0) + return 0; + kdb_printf("Zero suppressed cpu(s):"); + for (cpu = first_cpu(suppress); cpu < num_possible_cpus(); + cpu = next_cpu(cpu, suppress)) { + kdb_printf(" %d", cpu); + if (cpu == num_possible_cpus() - 1 || + next_cpu(cpu, suppress) != cpu + 1) + continue; + while (cpu < num_possible_cpus() && + next_cpu(cpu, suppress) == cpu + 1) + ++cpu; + kdb_printf("-%d", cpu); + } + kdb_printf("\n"); + +#undef KDB_PCU + + return 0; +} + +/* + * display help for the use of cmd | grep pattern + */ +static int kdb_grep_help(int argc, const char **argv) +{ + kdb_printf("Usage of cmd args | grep pattern:\n"); + kdb_printf(" Any command's output may be filtered through an "); + kdb_printf("emulated 'pipe'.\n"); + kdb_printf(" 'grep' is just a key word.\n"); + kdb_printf(" The pattern may include a very limited set of " + "metacharacters:\n"); + kdb_printf(" pattern or ^pattern or pattern$ or ^pattern$\n"); + kdb_printf(" And if there are spaces in the pattern, you may " + "quote it:\n"); + kdb_printf(" \"pat tern\" or \"^pat tern\" or \"pat tern$\"" + " or \"^pat tern$\"\n"); + return 0; +} + +/* + * kdb_register_repeat - This function is used to register a kernel + * debugger command. + * Inputs: + * cmd Command name + * func Function to execute the command + * usage A simple usage string showing arguments + * help A simple help string describing command + * repeat Does the command auto repeat on enter? + * Returns: + * zero for success, one if a duplicate command. + */ +#define kdb_command_extend 50 /* arbitrary */ +int kdb_register_repeat(char *cmd, + kdb_func_t func, + char *usage, + char *help, + short minlen, + kdb_repeat_t repeat) +{ + int i; + kdbtab_t *kp; + + /* + * Brute force method to determine duplicates + */ + for_each_kdbcmd(kp, i) { + if (kp->cmd_name && (strcmp(kp->cmd_name, cmd) == 0)) { + kdb_printf("Duplicate kdb command registered: " + "%s, func %p help %s\n", cmd, func, help); + return 1; + } + } + + /* + * Insert command into first available location in table + */ + for_each_kdbcmd(kp, i) { + if (kp->cmd_name == NULL) + break; + } + + if (i >= kdb_max_commands) { + kdbtab_t *new = kmalloc((kdb_max_commands - KDB_BASE_CMD_MAX + + kdb_command_extend) * sizeof(*new), GFP_KDB); + if (!new) { + kdb_printf("Could not allocate new kdb_command " + "table\n"); + return 1; + } + if (kdb_commands) { + memcpy(new, kdb_commands, + kdb_max_commands * sizeof(*new)); + kfree(kdb_commands); + } + memset(new + kdb_max_commands, 0, + kdb_command_extend * sizeof(*new)); + kdb_commands = new; + kp = kdb_commands + kdb_max_commands; + kdb_max_commands += kdb_command_extend; + } + + kp->cmd_name = cmd; + kp->cmd_func = func; + kp->cmd_usage = usage; + kp->cmd_help = help; + kp->cmd_flags = 0; + kp->cmd_minlen = minlen; + kp->cmd_repeat = repeat; + + return 0; +} + +/* + * kdb_register - Compatibility register function for commands that do + * not need to specify a repeat state. Equivalent to + * kdb_register_repeat with KDB_REPEAT_NONE. + * Inputs: + * cmd Command name + * func Function to execute the command + * usage A simple usage string showing arguments + * help A simple help string describing command + * Returns: + * zero for success, one if a duplicate command. + */ +int kdb_register(char *cmd, + kdb_func_t func, + char *usage, + char *help, + short minlen) +{ + return kdb_register_repeat(cmd, func, usage, help, minlen, + KDB_REPEAT_NONE); +} + +/* + * kdb_unregister - This function is used to unregister a kernel + * debugger command. It is generally called when a module which + * implements kdb commands is unloaded. + * Inputs: + * cmd Command name + * Returns: + * zero for success, one command not registered. + */ +int kdb_unregister(char *cmd) +{ + int i; + kdbtab_t *kp; + + /* + * find the command. + */ + for (i = 0, kp = kdb_commands; i < kdb_max_commands; i++, kp++) { + if (kp->cmd_name && (strcmp(kp->cmd_name, cmd) == 0)) { + kp->cmd_name = NULL; + return 0; + } + } + + /* Couldn't find it. */ + return 1; +} + +/* Initialize the kdb command table. */ +static void __init kdb_inittab(void) +{ + int i; + kdbtab_t *kp; + + for_each_kdbcmd(kp, i) + kp->cmd_name = NULL; + + kdb_register_repeat("md", kdb_md, "<vaddr>", + "Display Memory Contents, also mdWcN, e.g. md8c1", 1, + KDB_REPEAT_NO_ARGS); + kdb_register_repeat("mdr", kdb_md, "<vaddr> <bytes>", + "Display Raw Memory", 0, KDB_REPEAT_NO_ARGS); + kdb_register_repeat("mdp", kdb_md, "<paddr> <bytes>", + "Display Physical Memory", 0, KDB_REPEAT_NO_ARGS); + kdb_register_repeat("mds", kdb_md, "<vaddr>", + "Display Memory Symbolically", 0, KDB_REPEAT_NO_ARGS); + kdb_register_repeat("mm", kdb_mm, "<vaddr> <contents>", + "Modify Memory Contents", 0, KDB_REPEAT_NO_ARGS); + kdb_register_repeat("go", kdb_go, "[<vaddr>]", + "Continue Execution", 1, KDB_REPEAT_NONE); + kdb_register_repeat("rd", kdb_rd, "", + "Display Registers", 0, KDB_REPEAT_NONE); + kdb_register_repeat("rm", kdb_rm, "<reg> <contents>", + "Modify Registers", 0, KDB_REPEAT_NONE); + kdb_register_repeat("ef", kdb_ef, "<vaddr>", + "Display exception frame", 0, KDB_REPEAT_NONE); + kdb_register_repeat("bt", kdb_bt, "[<vaddr>]", + "Stack traceback", 1, KDB_REPEAT_NONE); + kdb_register_repeat("btp", kdb_bt, "<pid>", + "Display stack for process <pid>", 0, KDB_REPEAT_NONE); + kdb_register_repeat("bta", kdb_bt, "[DRSTCZEUIMA]", + "Display stack all processes", 0, KDB_REPEAT_NONE); + kdb_register_repeat("btc", kdb_bt, "", + "Backtrace current process on each cpu", 0, KDB_REPEAT_NONE); + kdb_register_repeat("btt", kdb_bt, "<vaddr>", + "Backtrace process given its struct task address", 0, + KDB_REPEAT_NONE); + kdb_register_repeat("ll", kdb_ll, "<first-element> <linkoffset> <cmd>", + "Execute cmd for each element in linked list", 0, KDB_REPEAT_NONE); + kdb_register_repeat("env", kdb_env, "", + "Show environment variables", 0, KDB_REPEAT_NONE); + kdb_register_repeat("set", kdb_set, "", + "Set environment variables", 0, KDB_REPEAT_NONE); + kdb_register_repeat("help", kdb_help, "", + "Display Help Message", 1, KDB_REPEAT_NONE); + kdb_register_repeat("?", kdb_help, "", + "Display Help Message", 0, KDB_REPEAT_NONE); + kdb_register_repeat("cpu", kdb_cpu, "<cpunum>", + "Switch to new cpu", 0, KDB_REPEAT_NONE); + kdb_register_repeat("kgdb", kdb_kgdb, "", + "Enter kgdb mode", 0, KDB_REPEAT_NONE); + kdb_register_repeat("ps", kdb_ps, "[<flags>|A]", + "Display active task list", 0, KDB_REPEAT_NONE); + kdb_register_repeat("pid", kdb_pid, "<pidnum>", + "Switch to another task", 0, KDB_REPEAT_NONE); + kdb_register_repeat("reboot", kdb_reboot, "", + "Reboot the machine immediately", 0, KDB_REPEAT_NONE); +#if defined(CONFIG_MODULES) + kdb_register_repeat("lsmod", kdb_lsmod, "", + "List loaded kernel modules", 0, KDB_REPEAT_NONE); +#endif +#if defined(CONFIG_MAGIC_SYSRQ) + kdb_register_repeat("sr", kdb_sr, "<key>", + "Magic SysRq key", 0, KDB_REPEAT_NONE); +#endif +#if defined(CONFIG_PRINTK) + kdb_register_repeat("dmesg", kdb_dmesg, "[lines]", + "Display syslog buffer", 0, KDB_REPEAT_NONE); +#endif + kdb_register_repeat("defcmd", kdb_defcmd, "name \"usage\" \"help\"", + "Define a set of commands, down to endefcmd", 0, KDB_REPEAT_NONE); + kdb_register_repeat("kill", kdb_kill, "<-signal> <pid>", + "Send a signal to a process", 0, KDB_REPEAT_NONE); + kdb_register_repeat("summary", kdb_summary, "", + "Summarize the system", 4, KDB_REPEAT_NONE); + kdb_register_repeat("per_cpu", kdb_per_cpu, "", + "Display per_cpu variables", 3, KDB_REPEAT_NONE); + kdb_register_repeat("grephelp", kdb_grep_help, "", + "Display help on | grep", 0, KDB_REPEAT_NONE); +} + +/* Execute any commands defined in kdb_cmds. */ +static void __init kdb_cmd_init(void) +{ + int i, diag; + for (i = 0; kdb_cmds[i]; ++i) { + diag = kdb_parse(kdb_cmds[i]); + if (diag) + kdb_printf("kdb command %s failed, kdb diag %d\n", + kdb_cmds[i], diag); + } + if (defcmd_in_progress) { + kdb_printf("Incomplete 'defcmd' set, forcing endefcmd\n"); + kdb_parse("endefcmd"); + } +} + +/* Intialize kdb_printf, breakpoint tables and kdb state */ +void __init kdb_init(int lvl) +{ + static int kdb_init_lvl = KDB_NOT_INITIALIZED; + int i; + + if (kdb_init_lvl == KDB_INIT_FULL || lvl <= kdb_init_lvl) + return; + for (i = kdb_init_lvl; i < lvl; i++) { + switch (i) { + case KDB_NOT_INITIALIZED: + kdb_inittab(); /* Initialize Command Table */ + kdb_initbptab(); /* Initialize Breakpoints */ + break; + case KDB_INIT_EARLY: + kdb_cmd_init(); /* Build kdb_cmds tables */ + break; + } + } + kdb_init_lvl = lvl; +} |