diff options
Diffstat (limited to 'init')
| -rw-r--r-- | init/Kconfig | 103 | ||||
| -rw-r--r-- | init/main.c | 60 |
2 files changed, 127 insertions, 36 deletions
diff --git a/init/Kconfig b/init/Kconfig index f763762d544..f6281711166 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -588,6 +588,13 @@ config KALLSYMS_ALL Say N. +config KALLSYMS_STRIP_GENERATED + bool "Strip machine generated symbols from kallsyms" + depends on KALLSYMS_ALL + default y + help + Say N if you want kallsyms to retain even machine generated symbols. + config KALLSYMS_EXTRA_PASS bool "Do an extra kallsyms pass" depends on KALLSYMS @@ -808,6 +815,7 @@ config TRACEPOINTS config MARKERS bool "Activate markers" + depends on TRACEPOINTS help Place an empty function call at each marker site. Can be dynamically changed for a probe function. @@ -916,6 +924,15 @@ config KMOD endif # MODULES +config INIT_ALL_POSSIBLE + bool + help + Back when each arch used to define their own cpu_online_map and + cpu_possible_map, some of them chose to initialize cpu_possible_map + with all 1s, and others with all 0s. When they were centralised, + it was better to provide this option than to break all the archs + and have several arch maintainers persuing me down dark alleys. + config STOP_MACHINE bool default y @@ -928,10 +945,90 @@ source "block/Kconfig" config PREEMPT_NOTIFIERS bool +choice + prompt "RCU Implementation" + default CLASSIC_RCU + config CLASSIC_RCU - def_bool !PREEMPT_RCU + bool "Classic RCU" help This option selects the classic RCU implementation that is designed for best read-side performance on non-realtime - systems. Classic RCU is the default. Note that the - PREEMPT_RCU symbol is used to select/deselect this option. + systems. + + Select this option if you are unsure. + +config TREE_RCU + bool "Tree-based hierarchical RCU" + help + This option selects the RCU implementation that is + designed for very large SMP system with hundreds or + thousands of CPUs. + +config PREEMPT_RCU + bool "Preemptible RCU" + depends on PREEMPT + help + This option reduces the latency of the kernel by making certain + RCU sections preemptible. Normally RCU code is non-preemptible, if + this option is selected then read-only RCU sections become + preemptible. This helps latency, but may expose bugs due to + now-naive assumptions about each RCU read-side critical section + remaining on a given CPU through its execution. + +endchoice + +config RCU_TRACE + bool "Enable tracing for RCU" + depends on TREE_RCU || PREEMPT_RCU + help + This option provides tracing in RCU which presents stats + in debugfs for debugging RCU implementation. + + Say Y here if you want to enable RCU tracing + Say N if you are unsure. + +config RCU_FANOUT + int "Tree-based hierarchical RCU fanout value" + range 2 64 if 64BIT + range 2 32 if !64BIT + depends on TREE_RCU + default 64 if 64BIT + default 32 if !64BIT + help + This option controls the fanout of hierarchical implementations + of RCU, allowing RCU to work efficiently on machines with + large numbers of CPUs. This value must be at least the cube + root of NR_CPUS, which allows NR_CPUS up to 32,768 for 32-bit + systems and up to 262,144 for 64-bit systems. + + Select a specific number if testing RCU itself. + Take the default if unsure. + +config RCU_FANOUT_EXACT + bool "Disable tree-based hierarchical RCU auto-balancing" + depends on TREE_RCU + default n + help + This option forces use of the exact RCU_FANOUT value specified, + regardless of imbalances in the hierarchy. This is useful for + testing RCU itself, and might one day be useful on systems with + strong NUMA behavior. + + Without RCU_FANOUT_EXACT, the code will balance the hierarchy. + + Say N if unsure. + +config TREE_RCU_TRACE + def_bool RCU_TRACE && TREE_RCU + select DEBUG_FS + help + This option provides tracing for the TREE_RCU implementation, + permitting Makefile to trivially select kernel/rcutree_trace.c. + +config PREEMPT_RCU_TRACE + def_bool RCU_TRACE && PREEMPT_RCU + select DEBUG_FS + help + This option provides tracing for the PREEMPT_RCU implementation, + permitting Makefile to trivially select kernel/rcupreempt_trace.c. diff --git a/init/main.c b/init/main.c index 7e117a231af..cd168ebc592 100644 --- a/init/main.c +++ b/init/main.c @@ -63,6 +63,7 @@ #include <linux/signal.h> #include <linux/idr.h> #include <linux/ftrace.h> +#include <trace/boot.h> #include <asm/io.h> #include <asm/bugs.h> @@ -74,15 +75,6 @@ #include <asm/smp.h> #endif -/* - * This is one of the first .c files built. Error out early if we have compiler - * trouble. - */ - -#if __GNUC__ == 4 && __GNUC_MINOR__ == 1 && __GNUC_PATCHLEVEL__ == 0 -#warning gcc-4.1.0 is known to miscompile the kernel. A different compiler version is recommended. -#endif - static int kernel_init(void *); extern void init_IRQ(void); @@ -379,12 +371,7 @@ EXPORT_SYMBOL(nr_cpu_ids); /* An arch may set nr_cpu_ids earlier if needed, so this would be redundant */ static void __init setup_nr_cpu_ids(void) { - int cpu, highest_cpu = 0; - - for_each_possible_cpu(cpu) - highest_cpu = cpu; - - nr_cpu_ids = highest_cpu + 1; + nr_cpu_ids = find_last_bit(cpumask_bits(cpu_possible_mask),NR_CPUS) + 1; } #ifndef CONFIG_HAVE_SETUP_PER_CPU_AREA @@ -526,9 +513,9 @@ static void __init boot_cpu_init(void) { int cpu = smp_processor_id(); /* Mark the boot cpu "present", "online" etc for SMP and UP case */ - cpu_set(cpu, cpu_online_map); - cpu_set(cpu, cpu_present_map); - cpu_set(cpu, cpu_possible_map); + set_cpu_online(cpu, true); + set_cpu_present(cpu, true); + set_cpu_possible(cpu, true); } void __init __weak smp_setup_processor_id(void) @@ -603,6 +590,8 @@ asmlinkage void __init start_kernel(void) sort_main_extable(); trap_init(); rcu_init(); + /* init some links before init_ISA_irqs() */ + early_irq_init(); init_IRQ(); pidhash_init(); init_timers(); @@ -669,6 +658,7 @@ asmlinkage void __init start_kernel(void) efi_enter_virtual_mode(); #endif thread_info_cache_init(); + cred_init(); fork_init(num_physpages); proc_caches_init(); buffer_init(); @@ -703,31 +693,35 @@ core_param(initcall_debug, initcall_debug, bool, 0644); int do_one_initcall(initcall_t fn) { int count = preempt_count(); - ktime_t delta; + ktime_t calltime, delta, rettime; char msgbuf[64]; - struct boot_trace it; + struct boot_trace_call call; + struct boot_trace_ret ret; if (initcall_debug) { - it.caller = task_pid_nr(current); - printk("calling %pF @ %i\n", fn, it.caller); - it.calltime = ktime_get(); + call.caller = task_pid_nr(current); + printk("calling %pF @ %i\n", fn, call.caller); + calltime = ktime_get(); + trace_boot_call(&call, fn); + enable_boot_trace(); } - it.result = fn(); + ret.result = fn(); if (initcall_debug) { - it.rettime = ktime_get(); - delta = ktime_sub(it.rettime, it.calltime); - it.duration = (unsigned long long) delta.tv64 >> 10; + disable_boot_trace(); + rettime = ktime_get(); + delta = ktime_sub(rettime, calltime); + ret.duration = (unsigned long long) ktime_to_ns(delta) >> 10; + trace_boot_ret(&ret, fn); printk("initcall %pF returned %d after %Ld usecs\n", fn, - it.result, it.duration); - trace_boot(&it, fn); + ret.result, ret.duration); } msgbuf[0] = 0; - if (it.result && it.result != -ENODEV && initcall_debug) - sprintf(msgbuf, "error code %d ", it.result); + if (ret.result && ret.result != -ENODEV && initcall_debug) + sprintf(msgbuf, "error code %d ", ret.result); if (preempt_count() != count) { strlcat(msgbuf, "preemption imbalance ", sizeof(msgbuf)); @@ -741,7 +735,7 @@ int do_one_initcall(initcall_t fn) printk("initcall %pF returned with %s\n", fn, msgbuf); } - return it.result; + return ret.result; } @@ -882,7 +876,7 @@ static int __init kernel_init(void * unused) * we're essentially up and running. Get rid of the * initmem segments and start the user-mode stuff.. */ - stop_boot_trace(); + init_post(); return 0; } |