diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/ioc4.h | 156 | ||||
| -rw-r--r-- | include/linux/ioc4_common.h | 21 |
2 files changed, 156 insertions, 21 deletions
diff --git a/include/linux/ioc4.h b/include/linux/ioc4.h new file mode 100644 index 00000000000..729bfa4c4ac --- /dev/null +++ b/include/linux/ioc4.h @@ -0,0 +1,156 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 2005 Silicon Graphics, Inc. All Rights Reserved. + */ + +#ifndef _LINUX_IOC4_H +#define _LINUX_IOC4_H + +#include <linux/interrupt.h> + +/*********************************** + * Structures needed by subdrivers * + ***********************************/ + +/* This structure fully describes the IOC4 miscellaneous registers which + * appear at bar[0]+0x00000 through bar[0]+0x0005c. The corresponding + * PCI resource is managed by the main IOC4 driver because it contains + * registers of interest to many different IOC4 subdrivers. + */ +struct ioc4_misc_regs { + /* Miscellaneous IOC4 registers */ + union ioc4_pci_err_addr_l { + uint32_t raw; + struct { + uint32_t valid:1; /* Address captured */ + uint32_t master_id:4; /* Unit causing error + * 0/1: Serial port 0 TX/RX + * 2/3: Serial port 1 TX/RX + * 4/5: Serial port 2 TX/RX + * 6/7: Serial port 3 TX/RX + * 8: ATA/ATAPI + * 9-15: Undefined + */ + uint32_t mul_err:1; /* Multiple errors occurred */ + uint32_t addr:26; /* Bits 31-6 of error addr */ + } fields; + } pci_err_addr_l; + uint32_t pci_err_addr_h; /* Bits 63-32 of error addr */ + union ioc4_sio_int { + uint32_t raw; + struct { + uint8_t tx_mt:1; /* TX ring buffer empty */ + uint8_t rx_full:1; /* RX ring buffer full */ + uint8_t rx_high:1; /* RX high-water exceeded */ + uint8_t rx_timer:1; /* RX timer has triggered */ + uint8_t delta_dcd:1; /* DELTA_DCD seen */ + uint8_t delta_cts:1; /* DELTA_CTS seen */ + uint8_t intr_pass:1; /* Interrupt pass-through */ + uint8_t tx_explicit:1; /* TX, MCW, or delay complete */ + } fields[4]; + } sio_ir; /* Serial interrupt state */ + union ioc4_other_int { + uint32_t raw; + struct { + uint32_t ata_int:1; /* ATA port passthru */ + uint32_t ata_memerr:1; /* ATA halted by mem error */ + uint32_t memerr:4; /* Serial halted by mem err */ + uint32_t kbd_int:1; /* kbd/mouse intr asserted */ + uint32_t reserved:16; /* zero */ + uint32_t rt_int:1; /* INT_OUT section latch */ + uint32_t gen_int:8; /* Intr. from generic pins */ + } fields; + } other_ir; /* Other interrupt state */ + union ioc4_sio_int sio_ies; /* Serial interrupt enable set */ + union ioc4_other_int other_ies; /* Other interrupt enable set */ + union ioc4_sio_int sio_iec; /* Serial interrupt enable clear */ + union ioc4_other_int other_iec; /* Other interrupt enable clear */ + union ioc4_sio_cr { + uint32_t raw; + struct { + uint32_t cmd_pulse:4; /* Bytebus strobe width */ + uint32_t arb_diag:3; /* PCI bus requester */ + uint32_t sio_diag_idle:1; /* Active ser req? */ + uint32_t ata_diag_idle:1; /* Active ATA req? */ + uint32_t ata_diag_active:1; /* ATA req is winner */ + uint32_t reserved:22; /* zero */ + } fields; + } sio_cr; + uint32_t unused1; + union ioc4_int_out { + uint32_t raw; + struct { + uint32_t count:16; /* Period control */ + uint32_t mode:3; /* Output signal shape */ + uint32_t reserved:11; /* zero */ + uint32_t diag:1; /* Timebase control */ + uint32_t int_out:1; /* Current value */ + } fields; + } int_out; /* External interrupt output control */ + uint32_t unused2; + union ioc4_gpcr { + uint32_t raw; + struct { + uint32_t dir:8; /* Pin direction */ + uint32_t edge:8; /* Edge/level mode */ + uint32_t reserved1:4; /* zero */ + uint32_t int_out_en:1; /* INT_OUT enable */ + uint32_t reserved2:11; /* zero */ + } fields; + } gpcr_s; /* Generic PIO control set */ + union ioc4_gpcr gpcr_c; /* Generic PIO control clear */ + union ioc4_gpdr { + uint32_t raw; + struct { + uint32_t gen_pin:8; /* State of pins */ + uint32_t reserved:24; + } fields; + } gpdr; /* Generic PIO data */ + uint32_t unused3; + union ioc4_gppr { + uint32_t raw; + struct { + uint32_t gen_pin:1; /* Single pin state */ + uint32_t reserved:31; + } fields; + } gppr[8]; /* Generic PIO pins */ +}; + +/* One of these per IOC4 + * + * The idd_serial_data field is present here, even though it's used + * solely by the serial subdriver, because the main IOC4 module + * properly owns pci_{get,set}_drvdata functionality. This field + * allows that subdriver to stash its own drvdata somewhere. + */ +struct ioc4_driver_data { + struct list_head idd_list; + unsigned long idd_bar0; + struct pci_dev *idd_pdev; + const struct pci_device_id *idd_pci_id; + struct __iomem ioc4_misc_regs *idd_misc_regs; + void *idd_serial_data; +}; + +/* One per submodule */ +struct ioc4_submodule { + struct list_head is_list; + char *is_name; + struct module *is_owner; + int (*is_probe) (struct ioc4_driver_data *); + int (*is_remove) (struct ioc4_driver_data *); +}; + +#define IOC4_NUM_CARDS 8 /* max cards per partition */ + +/********************************** + * Functions needed by submodules * + **********************************/ + +extern int ioc4_register_submodule(struct ioc4_submodule *); +extern void ioc4_unregister_submodule(struct ioc4_submodule *); + +#endif /* _LINUX_IOC4_H */ diff --git a/include/linux/ioc4_common.h b/include/linux/ioc4_common.h deleted file mode 100644 index b03bcc46df5..00000000000 --- a/include/linux/ioc4_common.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (c) 2005 Silicon Graphics, Inc. All Rights Reserved. - */ - -#ifndef _LINUX_IOC4_COMMON_H -#define _LINUX_IOC4_COMMON_H - -/* prototypes */ - -int ioc4_serial_init(void); - -int ioc4_serial_attach_one(struct pci_dev *pdev, const struct - pci_device_id *pci_id); -int ioc4_ide_attach_one(struct pci_dev *pdev, const struct - pci_device_id *pci_id); - -#endif /* _LINUX_IOC4_COMMON_H */ |