5 files changed, 67 insertions, 4 deletions
diff --git a/include/linux/mfd/ab8500.h b/include/linux/mfd/ab8500.h
index 56f8dea7215..6e4f77ef4d2 100644
--- a/include/linux/mfd/ab8500.h
+++ b/include/linux/mfd/ab8500.h
@@ -139,17 +139,23 @@ struct ab8500 {
 	u8 oldmask[AB8500_NUM_IRQ_REGS];
 };
 
+struct regulator_reg_init;
 struct regulator_init_data;
 
 /**
  * struct ab8500_platform_data - AB8500 platform data
  * @irq_base: start of AB8500 IRQs, AB8500_NR_IRQS will be used
  * @init: board-specific initialization after detection of ab8500
+ * @num_regulator_reg_init: number of regulator init registers
+ * @regulator_reg_init: regulator init registers
+ * @num_regulator: number of regulators
  * @regulator: machine-specific constraints for regulators
  */
 struct ab8500_platform_data {
 	int irq_base;
 	void (*init) (struct ab8500 *);
+	int num_regulator_reg_init;
+	struct ab8500_regulator_reg_init *regulator_reg_init;
 	int num_regulator;
 	struct regulator_init_data *regulator;
 };
diff --git a/include/linux/regulator/ab8500.h b/include/linux/regulator/ab8500.h
index 6a210f1511f..76579f964a2 100644
--- a/include/linux/regulator/ab8500.h
+++ b/include/linux/regulator/ab8500.h
@@ -3,8 +3,8 @@
  *
  * License Terms: GNU General Public License v2
  *
- * Author: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson
- *
+ * Authors: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson
+ *          Bengt Jonsson <bengt.g.jonsson@stericsson.com> for ST-Ericsson
  */
 
 #ifndef __LINUX_MFD_AB8500_REGULATOR_H
@@ -17,6 +17,7 @@ enum ab8500_regulator_id {
 	AB8500_LDO_AUX3,
 	AB8500_LDO_INTCORE,
 	AB8500_LDO_TVOUT,
+	AB8500_LDO_USB,
 	AB8500_LDO_AUDIO,
 	AB8500_LDO_ANAMIC1,
 	AB8500_LDO_ANAMIC2,
@@ -24,4 +25,50 @@ enum ab8500_regulator_id {
 	AB8500_LDO_ANA,
 	AB8500_NUM_REGULATORS,
 };
+
+/* AB8500 register initialization */
+struct ab8500_regulator_reg_init {
+	int id;
+	u8 value;
+};
+
+#define INIT_REGULATOR_REGISTER(_id, _value)	\
+	{					\
+		.id = _id,			\
+		.value = _value,		\
+	}
+
+/* AB8500 registers */
+enum ab8500_regulator_reg {
+	AB8500_REGUREQUESTCTRL2,
+	AB8500_REGUREQUESTCTRL3,
+	AB8500_REGUREQUESTCTRL4,
+	AB8500_REGUSYSCLKREQ1HPVALID1,
+	AB8500_REGUSYSCLKREQ1HPVALID2,
+	AB8500_REGUHWHPREQ1VALID1,
+	AB8500_REGUHWHPREQ1VALID2,
+	AB8500_REGUHWHPREQ2VALID1,
+	AB8500_REGUHWHPREQ2VALID2,
+	AB8500_REGUSWHPREQVALID1,
+	AB8500_REGUSWHPREQVALID2,
+	AB8500_REGUSYSCLKREQVALID1,
+	AB8500_REGUSYSCLKREQVALID2,
+	AB8500_REGUMISC1,
+	AB8500_VAUDIOSUPPLY,
+	AB8500_REGUCTRL1VAMIC,
+	AB8500_VPLLVANAREGU,
+	AB8500_VREFDDR,
+	AB8500_EXTSUPPLYREGU,
+	AB8500_VAUX12REGU,
+	AB8500_VRF1VAUX3REGU,
+	AB8500_VAUX1SEL,
+	AB8500_VAUX2SEL,
+	AB8500_VRF1VAUX3SEL,
+	AB8500_REGUCTRL2SPARE,
+	AB8500_REGUCTRLDISCH,
+	AB8500_REGUCTRLDISCH2,
+	AB8500_VSMPS1SEL1,
+	AB8500_NUM_REGULATOR_REGISTERS,
+};
+
 #endif
diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h
index 7954f6bd7ed..9e87c1cb727 100644
--- a/include/linux/regulator/consumer.h
+++ b/include/linux/regulator/consumer.h
@@ -153,6 +153,8 @@ int regulator_list_voltage(struct regulator *regulator, unsigned selector);
 int regulator_is_supported_voltage(struct regulator *regulator,
 				   int min_uV, int max_uV);
 int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV);
+int regulator_set_voltage_time(struct regulator *regulator,
+			       int old_uV, int new_uV);
 int regulator_get_voltage(struct regulator *regulator);
 int regulator_sync_voltage(struct regulator *regulator);
 int regulator_set_current_limit(struct regulator *regulator,
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index b8ed16a33c4..6c433b89c80 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -63,7 +63,11 @@ enum regulator_status {
  *                    when running with the specified parameters.
  *
  * @enable_time: Time taken for the regulator voltage output voltage to
- *               stabalise after being enabled, in microseconds.
+ *               stabilise after being enabled, in microseconds.
+ * @set_voltage_time_sel: Time taken for the regulator voltage output voltage
+ *               to stabilise after being set to a new value, in microseconds.
+ *               The function provides the from and to voltage selector, the
+ *               function should return the worst case.
  *
  * @set_suspend_voltage: Set the voltage for the regulator when the system
  *                       is suspended.
@@ -103,8 +107,11 @@ struct regulator_ops {
 	int (*set_mode) (struct regulator_dev *, unsigned int mode);
 	unsigned int (*get_mode) (struct regulator_dev *);
 
-	/* Time taken to enable the regulator */
+	/* Time taken to enable or set voltage on the regulator */
 	int (*enable_time) (struct regulator_dev *);
+	int (*set_voltage_time_sel) (struct regulator_dev *,
+				     unsigned int old_selector,
+				     unsigned int new_selector);
 
 	/* report regulator status ... most other accessors report
 	 * control inputs, this reports results of combining inputs
diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h
index 761c745b9c2..c4c4fc45f85 100644
--- a/include/linux/regulator/machine.h
+++ b/include/linux/regulator/machine.h
@@ -186,6 +186,7 @@ struct regulator_init_data {
 };
 
 int regulator_suspend_prepare(suspend_state_t state);
+int regulator_suspend_finish(void);
 
 #ifdef CONFIG_REGULATOR
 void regulator_has_full_constraints(void);