diff options
Diffstat (limited to 'include')
41 files changed, 548 insertions, 314 deletions
diff --git a/include/asm-arm/arch-at91/at91_adc.h b/include/asm-arm/arch-at91/at91_adc.h new file mode 100644 index 00000000000..1ed66eaaf83 --- /dev/null +++ b/include/asm-arm/arch-at91/at91_adc.h @@ -0,0 +1,61 @@ +/* + * include/asm-arm/arch-at91/at91_adc.h + * + * Copyright (C) SAN People + * + * Analog-to-Digital Converter (ADC) registers. + * Based on AT91SAM9260 datasheet revision D. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91_ADC_H +#define AT91_ADC_H + +#define AT91_ADC_CR 0x00 /* Control Register */ +#define AT91_ADC_SWRST (1 << 0) /* Software Reset */ +#define AT91_ADC_START (1 << 1) /* Start Conversion */ + +#define AT91_ADC_MR 0x04 /* Mode Register */ +#define AT91_ADC_TRGEN (1 << 0) /* Trigger Enable */ +#define AT91_ADC_TRGSEL (7 << 1) /* Trigger Selection */ +#define AT91_ADC_TRGSEL_TC0 (0 << 1) +#define AT91_ADC_TRGSEL_TC1 (1 << 1) +#define AT91_ADC_TRGSEL_TC2 (2 << 1) +#define AT91_ADC_TRGSEL_EXTERNAL (6 << 1) +#define AT91_ADC_LOWRES (1 << 4) /* Low Resolution */ +#define AT91_ADC_SLEEP (1 << 5) /* Sleep Mode */ +#define AT91_ADC_PRESCAL (0x3f << 8) /* Prescalar Rate Selection */ +#define AT91_ADC_PRESCAL_(x) ((x) << 8) +#define AT91_ADC_STARTUP (0x1f << 16) /* Startup Up Time */ +#define AT91_ADC_STARTUP_(x) ((x) << 16) +#define AT91_ADC_SHTIM (0xf << 24) /* Sample & Hold Time */ +#define AT91_ADC_SHTIM_(x) ((x) << 24) + +#define AT91_ADC_CHER 0x10 /* Channel Enable Register */ +#define AT91_ADC_CHDR 0x14 /* Channel Disable Register */ +#define AT91_ADC_CHSR 0x18 /* Channel Status Register */ +#define AT91_ADC_CH(n) (1 << (n)) /* Channel Number */ + +#define AT91_ADC_SR 0x1C /* Status Register */ +#define AT91_ADC_EOC(n) (1 << (n)) /* End of Conversion on Channel N */ +#define AT91_ADC_OVRE(n) (1 << ((n) + 8))/* Overrun Error on Channel N */ +#define AT91_ADC_DRDY (1 << 16) /* Data Ready */ +#define AT91_ADC_GOVRE (1 << 17) /* General Overrun Error */ +#define AT91_ADC_ENDRX (1 << 18) /* End of RX Buffer */ +#define AT91_ADC_RXFUFF (1 << 19) /* RX Buffer Full */ + +#define AT91_ADC_LCDR 0x20 /* Last Converted Data Register */ +#define AT91_ADC_LDATA (0x3ff) + +#define AT91_ADC_IER 0x24 /* Interrupt Enable Register */ +#define AT91_ADC_IDR 0x28 /* Interrupt Disable Register */ +#define AT91_ADC_IMR 0x2C /* Interrupt Mask Register */ + +#define AT91_ADC_CHR(n) (0x30 + ((n) * 4) /* Channel Data Register N */ +#define AT91_ADC_DATA (0x3ff) + +#endif diff --git a/include/asm-arm/arch-at91/board.h b/include/asm-arm/arch-at91/board.h index 7b9903c2c44..7a34a5b1fed 100644 --- a/include/asm-arm/arch-at91/board.h +++ b/include/asm-arm/arch-at91/board.h @@ -62,7 +62,7 @@ struct at91_mmc_data { }; extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data); - /* Ethernet */ + /* Ethernet (EMAC & MACB) */ struct at91_eth_data { u8 phy_irq_pin; /* PHY IRQ */ u8 is_rmii; /* using RMII interface? */ @@ -114,6 +114,16 @@ struct atmel_uart_data { }; extern void __init at91_add_device_serial(void); + /* LCD Controller */ +struct atmel_lcdfb_info; +extern void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data); + + /* AC97 */ +struct atmel_ac97_data { + u8 reset_pin; /* reset */ +} +extern void __init at91_add_device_ac97(struct atmel_ac97_data *data); + /* LEDs */ extern u8 at91_leds_cpu; extern u8 at91_leds_timer; diff --git a/include/asm-arm/arch-ebsa110/io.h b/include/asm-arm/arch-ebsa110/io.h index 722c5e08628..44a4001de80 100644 --- a/include/asm-arm/arch-ebsa110/io.h +++ b/include/asm-arm/arch-ebsa110/io.h @@ -81,4 +81,12 @@ extern void outsb(unsigned int port, const void *buf, int sz); extern void outsw(unsigned int port, const void *buf, int sz); extern void outsl(unsigned int port, const void *buf, int sz); +/* can't support writesb atm */ +extern void writesw(void __iomem *addr, const void *data, int wordlen); +extern void writesl(void __iomem *addr, const void *data, int longlen); + +/* can't support readsb atm */ +extern void readsw(const void __iomem *addr, void *data, int wordlen); +extern void readsl(const void __iomem *addr, void *data, int longlen); + #endif diff --git a/include/asm-arm/arch-imx/imx-regs.h b/include/asm-arm/arch-imx/imx-regs.h index e56a4e247d6..de6494a4dc6 100644 --- a/include/asm-arm/arch-imx/imx-regs.h +++ b/include/asm-arm/arch-imx/imx-regs.h @@ -477,122 +477,4 @@ #define LCDISR_EOF (1<<1) #define LCDISR_BOF (1<<0) -/* - * UART Module. Takes the UART base address as argument - */ -#define URXD0(x) __REG( 0x0 + (x)) /* Receiver Register */ -#define URTX0(x) __REG( 0x40 + (x)) /* Transmitter Register */ -#define UCR1(x) __REG( 0x80 + (x)) /* Control Register 1 */ -#define UCR2(x) __REG( 0x84 + (x)) /* Control Register 2 */ -#define UCR3(x) __REG( 0x88 + (x)) /* Control Register 3 */ -#define UCR4(x) __REG( 0x8c + (x)) /* Control Register 4 */ -#define UFCR(x) __REG( 0x90 + (x)) /* FIFO Control Register */ -#define USR1(x) __REG( 0x94 + (x)) /* Status Register 1 */ -#define USR2(x) __REG( 0x98 + (x)) /* Status Register 2 */ -#define UESC(x) __REG( 0x9c + (x)) /* Escape Character Register */ -#define UTIM(x) __REG( 0xa0 + (x)) /* Escape Timer Register */ -#define UBIR(x) __REG( 0xa4 + (x)) /* BRM Incremental Register */ -#define UBMR(x) __REG( 0xa8 + (x)) /* BRM Modulator Register */ -#define UBRC(x) __REG( 0xac + (x)) /* Baud Rate Count Register */ -#define BIPR1(x) __REG( 0xb0 + (x)) /* Incremental Preset Register 1 */ -#define BIPR2(x) __REG( 0xb4 + (x)) /* Incremental Preset Register 2 */ -#define BIPR3(x) __REG( 0xb8 + (x)) /* Incremental Preset Register 3 */ -#define BIPR4(x) __REG( 0xbc + (x)) /* Incremental Preset Register 4 */ -#define BMPR1(x) __REG( 0xc0 + (x)) /* BRM Modulator Register 1 */ -#define BMPR2(x) __REG( 0xc4 + (x)) /* BRM Modulator Register 2 */ -#define BMPR3(x) __REG( 0xc8 + (x)) /* BRM Modulator Register 3 */ -#define BMPR4(x) __REG( 0xcc + (x)) /* BRM Modulator Register 4 */ -#define UTS(x) __REG( 0xd0 + (x)) /* UART Test Register */ - -/* UART Control Register Bit Fields.*/ -#define URXD_CHARRDY (1<<15) -#define URXD_ERR (1<<14) -#define URXD_OVRRUN (1<<13) -#define URXD_FRMERR (1<<12) -#define URXD_BRK (1<<11) -#define URXD_PRERR (1<<10) -#define UCR1_ADEN (1<<15) /* Auto dectect interrupt */ -#define UCR1_ADBR (1<<14) /* Auto detect baud rate */ -#define UCR1_TRDYEN (1<<13) /* Transmitter ready interrupt enable */ -#define UCR1_IDEN (1<<12) /* Idle condition interrupt */ -#define UCR1_RRDYEN (1<<9) /* Recv ready interrupt enable */ -#define UCR1_RDMAEN (1<<8) /* Recv ready DMA enable */ -#define UCR1_IREN (1<<7) /* Infrared interface enable */ -#define UCR1_TXMPTYEN (1<<6) /* Transimitter empty interrupt enable */ -#define UCR1_RTSDEN (1<<5) /* RTS delta interrupt enable */ -#define UCR1_SNDBRK (1<<4) /* Send break */ -#define UCR1_TDMAEN (1<<3) /* Transmitter ready DMA enable */ -#define UCR1_UARTCLKEN (1<<2) /* UART clock enabled */ -#define UCR1_DOZE (1<<1) /* Doze */ -#define UCR1_UARTEN (1<<0) /* UART enabled */ -#define UCR2_ESCI (1<<15) /* Escape seq interrupt enable */ -#define UCR2_IRTS (1<<14) /* Ignore RTS pin */ -#define UCR2_CTSC (1<<13) /* CTS pin control */ -#define UCR2_CTS (1<<12) /* Clear to send */ -#define UCR2_ESCEN (1<<11) /* Escape enable */ -#define UCR2_PREN (1<<8) /* Parity enable */ -#define UCR2_PROE (1<<7) /* Parity odd/even */ -#define UCR2_STPB (1<<6) /* Stop */ -#define UCR2_WS (1<<5) /* Word size */ -#define UCR2_RTSEN (1<<4) /* Request to send interrupt enable */ -#define UCR2_TXEN (1<<2) /* Transmitter enabled */ -#define UCR2_RXEN (1<<1) /* Receiver enabled */ -#define UCR2_SRST (1<<0) /* SW reset */ -#define UCR3_DTREN (1<<13) /* DTR interrupt enable */ -#define UCR3_PARERREN (1<<12) /* Parity enable */ -#define UCR3_FRAERREN (1<<11) /* Frame error interrupt enable */ -#define UCR3_DSR (1<<10) /* Data set ready */ -#define UCR3_DCD (1<<9) /* Data carrier detect */ -#define UCR3_RI (1<<8) /* Ring indicator */ -#define UCR3_TIMEOUTEN (1<<7) /* Timeout interrupt enable */ -#define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */ -#define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */ -#define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */ -#define UCR3_REF25 (1<<3) /* Ref freq 25 MHz */ -#define UCR3_REF30 (1<<2) /* Ref Freq 30 MHz */ -#define UCR3_INVT (1<<1) /* Inverted Infrared transmission */ -#define UCR3_BPEN (1<<0) /* Preset registers enable */ -#define UCR4_CTSTL_32 (32<<10) /* CTS trigger level (32 chars) */ -#define UCR4_INVR (1<<9) /* Inverted infrared reception */ -#define UCR4_ENIRI (1<<8) /* Serial infrared interrupt enable */ -#define UCR4_WKEN (1<<7) /* Wake interrupt enable */ -#define UCR4_REF16 (1<<6) /* Ref freq 16 MHz */ -#define UCR4_IRSC (1<<5) /* IR special case */ -#define UCR4_TCEN (1<<3) /* Transmit complete interrupt enable */ -#define UCR4_BKEN (1<<2) /* Break condition interrupt enable */ -#define UCR4_OREN (1<<1) /* Receiver overrun interrupt enable */ -#define UCR4_DREN (1<<0) /* Recv data ready interrupt enable */ -#define UFCR_RXTL_SHF 0 /* Receiver trigger level shift */ -#define UFCR_RFDIV (7<<7) /* Reference freq divider mask */ -#define UFCR_TXTL_SHF 10 /* Transmitter trigger level shift */ -#define USR1_PARITYERR (1<<15) /* Parity error interrupt flag */ -#define USR1_RTSS (1<<14) /* RTS pin status */ -#define USR1_TRDY (1<<13) /* Transmitter ready interrupt/dma flag */ -#define USR1_RTSD (1<<12) /* RTS delta */ -#define USR1_ESCF (1<<11) /* Escape seq interrupt flag */ -#define USR1_FRAMERR (1<<10) /* Frame error interrupt flag */ -#define USR1_RRDY (1<<9) /* Receiver ready interrupt/dma flag */ -#define USR1_TIMEOUT (1<<7) /* Receive timeout interrupt status */ -#define USR1_RXDS (1<<6) /* Receiver idle interrupt flag */ -#define USR1_AIRINT (1<<5) /* Async IR wake interrupt flag */ -#define USR1_AWAKE (1<<4) /* Aysnc wake interrupt flag */ -#define USR2_ADET (1<<15) /* Auto baud rate detect complete */ -#define USR2_TXFE (1<<14) /* Transmit buffer FIFO empty */ -#define USR2_DTRF (1<<13) /* DTR edge interrupt flag */ -#define USR2_IDLE (1<<12) /* Idle condition */ -#define USR2_IRINT (1<<8) /* Serial infrared interrupt flag */ -#define USR2_WAKE (1<<7) /* Wake */ -#define USR2_RTSF (1<<4) /* RTS edge interrupt flag */ -#define USR2_TXDC (1<<3) /* Transmitter complete */ -#define USR2_BRCD (1<<2) /* Break condition */ -#define USR2_ORE (1<<1) /* Overrun error */ -#define USR2_RDR (1<<0) /* Recv data ready */ -#define UTS_FRCPERR (1<<13) /* Force parity error */ -#define UTS_LOOP (1<<12) /* Loop tx and rx */ -#define UTS_TXEMPTY (1<<6) /* TxFIFO empty */ -#define UTS_RXEMPTY (1<<5) /* RxFIFO empty */ -#define UTS_TXFULL (1<<4) /* TxFIFO full */ -#define UTS_RXFULL (1<<3) /* RxFIFO full */ -#define UTS_SOFTRST (1<<0) /* Software reset */ - #endif // _IMX_REGS_H diff --git a/include/asm-arm/arch-iop13xx/io.h b/include/asm-arm/arch-iop13xx/io.h index 5a7bdb52660..7dfff4ad82b 100644 --- a/include/asm-arm/arch-iop13xx/io.h +++ b/include/asm-arm/arch-iop13xx/io.h @@ -26,7 +26,6 @@ #define __mem_isa(a) (a) extern void __iomem * __iop13xx_io(unsigned long io_addr); -extern void __iomem * __ioremap(unsigned long, size_t, unsigned long); extern void __iomem *__iop13xx_ioremap(unsigned long cookie, size_t size, unsigned long flags); extern void __iop13xx_iounmap(void __iomem *addr); diff --git a/include/asm-arm/arch-iop13xx/iop13xx.h b/include/asm-arm/arch-iop13xx/iop13xx.h index d26b755a987..85707e9c332 100644 --- a/include/asm-arm/arch-iop13xx/iop13xx.h +++ b/include/asm-arm/arch-iop13xx/iop13xx.h @@ -8,6 +8,7 @@ extern u32 iop13xx_atue_pmmr_offset; void iop13xx_init_irq(void); void iop13xx_map_io(void); void iop13xx_platform_init(void); +void iop13xx_add_tpmi_devices(void); void iop13xx_init_irq(void); /* CPUID CP6 R0 Page 0 */ @@ -27,19 +28,24 @@ static inline int iop13xx_cpu_id(void) #define IOP13XX_PCI_OFFSET IOP13XX_MAX_RAM_SIZE /* PCI MAP - * 0x0000.0000 - 0x8000.0000 1:1 mapping with Physical RAM - * 0x8000.0000 - 0x8800.0000 PCIX/PCIE memory window (128MB) -*/ + * bus range cpu phys cpu virt note + * 0x0000.0000 + 2GB (n/a) (n/a) inbound, 1:1 mapping with Physical RAM + * 0x8000.0000 + 928M 0x1.8000.0000 (ioremap) PCIX outbound memory window + * 0x8000.0000 + 928M 0x2.8000.0000 (ioremap) PCIE outbound memory window + * + * IO MAP + * 0x1000 + 64K 0x0.fffb.1000 0xfec6.1000 PCIX outbound i/o window + * 0x1000 + 64K 0x0.fffd.1000 0xfed7.1000 PCIE outbound i/o window + */ #define IOP13XX_PCIX_IO_WINDOW_SIZE 0x10000UL #define IOP13XX_PCIX_LOWER_IO_PA 0xfffb0000UL #define IOP13XX_PCIX_LOWER_IO_VA 0xfec60000UL -#define IOP13XX_PCIX_LOWER_IO_BA 0x0fff0000UL +#define IOP13XX_PCIX_LOWER_IO_BA 0x0UL /* OIOTVR */ +#define IOP13XX_PCIX_IO_BUS_OFFSET 0x1000UL #define IOP13XX_PCIX_UPPER_IO_PA (IOP13XX_PCIX_LOWER_IO_PA +\ IOP13XX_PCIX_IO_WINDOW_SIZE - 1) #define IOP13XX_PCIX_UPPER_IO_VA (IOP13XX_PCIX_LOWER_IO_VA +\ IOP13XX_PCIX_IO_WINDOW_SIZE - 1) -#define IOP13XX_PCIX_IO_OFFSET (IOP13XX_PCIX_LOWER_IO_VA -\ - IOP13XX_PCIX_LOWER_IO_BA) #define IOP13XX_PCIX_IO_PHYS_TO_VIRT(addr) (u32) ((u32) addr -\ (IOP13XX_PCIX_LOWER_IO_PA\ - IOP13XX_PCIX_LOWER_IO_VA)) @@ -65,15 +71,14 @@ static inline int iop13xx_cpu_id(void) #define IOP13XX_PCIE_IO_WINDOW_SIZE 0x10000UL #define IOP13XX_PCIE_LOWER_IO_PA 0xfffd0000UL #define IOP13XX_PCIE_LOWER_IO_VA 0xfed70000UL -#define IOP13XX_PCIE_LOWER_IO_BA 0x0fff0000UL +#define IOP13XX_PCIE_LOWER_IO_BA 0x0UL /* OIOTVR */ +#define IOP13XX_PCIE_IO_BUS_OFFSET 0x1000UL #define IOP13XX_PCIE_UPPER_IO_PA (IOP13XX_PCIE_LOWER_IO_PA +\ IOP13XX_PCIE_IO_WINDOW_SIZE - 1) #define IOP13XX_PCIE_UPPER_IO_VA (IOP13XX_PCIE_LOWER_IO_VA +\ IOP13XX_PCIE_IO_WINDOW_SIZE - 1) #define IOP13XX_PCIE_UPPER_IO_BA (IOP13XX_PCIE_LOWER_IO_BA +\ IOP13XX_PCIE_IO_WINDOW_SIZE - 1) -#define IOP13XX_PCIE_IO_OFFSET (IOP13XX_PCIE_LOWER_IO_VA -\ - IOP13XX_PCIE_LOWER_IO_BA) #define IOP13XX_PCIE_IO_PHYS_TO_VIRT(addr) (u32) ((u32) addr -\ (IOP13XX_PCIE_LOWER_IO_PA\ - IOP13XX_PCIE_LOWER_IO_VA)) @@ -451,4 +456,5 @@ static inline int iop13xx_cpu_id(void) #define IOP13XX_PBI_BAR1 IOP13XX_PBI_OFFSET(0x10) #define IOP13XX_PBI_LR1 IOP13XX_PBI_OFFSET(0x14) +#define IOP13XX_PROCESSOR_FREQ IOP13XX_REG_ADDR32(0x2180) #endif /* _IOP13XX_HW_H_ */ diff --git a/include/asm-arm/arch-iop13xx/time.h b/include/asm-arm/arch-iop13xx/time.h index 77a837a02de..49213d9d7ca 100644 --- a/include/asm-arm/arch-iop13xx/time.h +++ b/include/asm-arm/arch-iop13xx/time.h @@ -7,9 +7,65 @@ #define IOP_TMR_PRIVILEGED 0x08 #define IOP_TMR_RATIO_1_1 0x00 +#define IOP13XX_XSI_FREQ_RATIO_MASK (3 << 19) +#define IOP13XX_XSI_FREQ_RATIO_2 (0 << 19) +#define IOP13XX_XSI_FREQ_RATIO_3 (1 << 19) +#define IOP13XX_XSI_FREQ_RATIO_4 (2 << 19) +#define IOP13XX_CORE_FREQ_MASK (7 << 16) +#define IOP13XX_CORE_FREQ_600 (0 << 16) +#define IOP13XX_CORE_FREQ_667 (1 << 16) +#define IOP13XX_CORE_FREQ_800 (2 << 16) +#define IOP13XX_CORE_FREQ_933 (3 << 16) +#define IOP13XX_CORE_FREQ_1000 (4 << 16) +#define IOP13XX_CORE_FREQ_1200 (5 << 16) + void iop_init_time(unsigned long tickrate); unsigned long iop_gettimeoffset(void); +static inline unsigned long iop13xx_core_freq(void) +{ + unsigned long freq = __raw_readl(IOP13XX_PROCESSOR_FREQ); + freq &= IOP13XX_CORE_FREQ_MASK; + switch (freq) { + case IOP13XX_CORE_FREQ_600: + return 600000000; + case IOP13XX_CORE_FREQ_667: + return 667000000; + case IOP13XX_CORE_FREQ_800: + return 800000000; + case IOP13XX_CORE_FREQ_933: + return 933000000; + case IOP13XX_CORE_FREQ_1000: + return 1000000000; + case IOP13XX_CORE_FREQ_1200: + return 1200000000; + default: + printk("%s: warning unknown frequency, defaulting to 800Mhz\n", + __FUNCTION__); + } + + return 800000000; +} + +static inline unsigned long iop13xx_xsi_bus_ratio(void) +{ + unsigned long ratio = __raw_readl(IOP13XX_PROCESSOR_FREQ); + ratio &= IOP13XX_XSI_FREQ_RATIO_MASK; + switch (ratio) { + case IOP13XX_XSI_FREQ_RATIO_2: + return 2; + case IOP13XX_XSI_FREQ_RATIO_3: + return 3; + case IOP13XX_XSI_FREQ_RATIO_4: + return 4; + default: + printk("%s: warning unknown ratio, defaulting to 2\n", + __FUNCTION__); + } + + return 2; +} + static inline void write_tmr0(u32 val) { asm volatile("mcr p6, 0, %0, c0, c9, 0" : : "r" (val)); diff --git a/include/asm-arm/arch-iop32x/io.h b/include/asm-arm/arch-iop32x/io.h index 5f570a598a3..994f16af505 100644 --- a/include/asm-arm/arch-iop32x/io.h +++ b/include/asm-arm/arch-iop32x/io.h @@ -13,7 +13,6 @@ #include <asm/hardware.h> -extern void __iomem * __ioremap(unsigned long, size_t, unsigned long); extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size, unsigned long flags); extern void __iop3xx_iounmap(void __iomem *addr); diff --git a/include/asm-arm/arch-iop32x/iop32x.h b/include/asm-arm/arch-iop32x/iop32x.h index 2e9469047eb..0d8af57221a 100644 --- a/include/asm-arm/arch-iop32x/iop32x.h +++ b/include/asm-arm/arch-iop32x/iop32x.h @@ -24,5 +24,14 @@ #include <asm/hardware/iop3xx.h> +/* ATU Parameters + * set up a 1:1 bus to physical ram relationship + * w/ physical ram on top of pci in the memory map + */ +#define IOP32X_MAX_RAM_SIZE 0x40000000UL +#define IOP3XX_MAX_RAM_SIZE IOP32X_MAX_RAM_SIZE +#define IOP3XX_PCI_LOWER_MEM_BA 0x80000000 +#define IOP32X_PCI_MEM_WINDOW_SIZE 0x04000000 +#define IOP3XX_PCI_MEM_WINDOW_SIZE IOP32X_PCI_MEM_WINDOW_SIZE #endif diff --git a/include/asm-arm/arch-iop32x/memory.h b/include/asm-arm/arch-iop32x/memory.h index 764cd3f0d41..c51072af214 100644 --- a/include/asm-arm/arch-iop32x/memory.h +++ b/include/asm-arm/arch-iop32x/memory.h @@ -19,8 +19,8 @@ * bus_to_virt: Used to convert an address for DMA operations * to an address that the kernel can use. */ -#define __virt_to_bus(x) (((__virt_to_phys(x)) & ~(*IOP3XX_IATVR2)) | ((*IOP3XX_IABAR2) & 0xfffffff0)) -#define __bus_to_virt(x) (__phys_to_virt(((x) & ~(*IOP3XX_IALR2)) | ( *IOP3XX_IATVR2))) +#define __virt_to_bus(x) (__virt_to_phys(x)) +#define __bus_to_virt(x) (__phys_to_virt(x)) #endif diff --git a/include/asm-arm/arch-iop33x/io.h b/include/asm-arm/arch-iop33x/io.h index 1bb5071e1fa..993f7589b29 100644 --- a/include/asm-arm/arch-iop33x/io.h +++ b/include/asm-arm/arch-iop33x/io.h @@ -13,7 +13,6 @@ #include <asm/hardware.h> -extern void __iomem * __ioremap(unsigned long, size_t, unsigned long); extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size, unsigned long flags); extern void __iop3xx_iounmap(void __iomem *addr); diff --git a/include/asm-arm/arch-iop33x/iop33x.h b/include/asm-arm/arch-iop33x/iop33x.h index 7ac6e93db5f..766985b9a72 100644 --- a/include/asm-arm/arch-iop33x/iop33x.h +++ b/include/asm-arm/arch-iop33x/iop33x.h @@ -29,5 +29,15 @@ #define IOP33X_UART1_PHYS (IOP3XX_PERIPHERAL_PHYS_BASE + 0x1740) #define IOP33X_UART1_VIRT (IOP3XX_PERIPHERAL_VIRT_BASE + 0x1740) +/* ATU Parameters + * set up a 1:1 bus to physical ram relationship + * w/ pci on top of physical ram in memory map + */ +#define IOP33X_MAX_RAM_SIZE 0x80000000UL +#define IOP3XX_MAX_RAM_SIZE IOP33X_MAX_RAM_SIZE +#define IOP3XX_PCI_LOWER_MEM_BA (PHYS_OFFSET + IOP33X_MAX_RAM_SIZE) +#define IOP33X_PCI_MEM_WINDOW_SIZE 0x08000000 +#define IOP3XX_PCI_MEM_WINDOW_SIZE IOP33X_PCI_MEM_WINDOW_SIZE + #endif diff --git a/include/asm-arm/arch-iop33x/memory.h b/include/asm-arm/arch-iop33x/memory.h index 0d39139b241..c8749127d6a 100644 --- a/include/asm-arm/arch-iop33x/memory.h +++ b/include/asm-arm/arch-iop33x/memory.h @@ -19,8 +19,8 @@ * bus_to_virt: Used to convert an address for DMA operations * to an address that the kernel can use. */ -#define __virt_to_bus(x) (((__virt_to_phys(x)) & ~(*IOP3XX_IATVR2)) | ((*IOP3XX_IABAR2) & 0xfffffff0)) -#define __bus_to_virt(x) (__phys_to_virt(((x) & ~(*IOP3XX_IALR2)) | ( *IOP3XX_IATVR2))) +#define __virt_to_bus(x) (__virt_to_phys(x)) +#define __bus_to_virt(x) (__phys_to_virt(x)) #endif diff --git a/include/asm-arm/arch-ixp23xx/io.h b/include/asm-arm/arch-ixp23xx/io.h index 18415a81ac7..66f5bafc315 100644 --- a/include/asm-arm/arch-ixp23xx/io.h +++ b/include/asm-arm/arch-ixp23xx/io.h @@ -23,7 +23,7 @@ #include <linux/kernel.h> /* For BUG */ static inline void __iomem * -ixp23xx_ioremap(unsigned long addr, unsigned long size, unsigned long flags) +ixp23xx_ioremap(unsigned long addr, unsigned long size, unsigned int mtype) { if (addr >= IXP23XX_PCI_MEM_START && addr <= IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE) { @@ -34,7 +34,7 @@ ixp23xx_ioremap(unsigned long addr, unsigned long size, unsigned long flags) ((addr - IXP23XX_PCI_MEM_START) + IXP23XX_PCI_MEM_VIRT); } - return __ioremap(addr, size, flags); + return __arm_ioremap(addr, size, mtype); } static inline void diff --git a/include/asm-arm/arch-ixp4xx/cpu.h b/include/asm-arm/arch-ixp4xx/cpu.h new file mode 100644 index 00000000000..d2523b326c6 --- /dev/null +++ b/include/asm-arm/arch-ixp4xx/cpu.h @@ -0,0 +1,31 @@ +/* + * include/asm-arm/arch-ixp4xx/cpu.h + * + * IXP4XX cpu type detection + * + * Copyright (C) 2007 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __ASM_ARCH_CPU_H__ +#define __ASM_ARCH_CPU_H__ + +extern unsigned int processor_id; +/* Processor id value in CP15 Register 0 */ +#define IXP425_PROCESSOR_ID_VALUE 0x690541c0 +#define IXP435_PROCESSOR_ID_VALUE 0x69054040 +#define IXP465_PROCESSOR_ID_VALUE 0x69054200 +#define IXP4XX_PROCESSOR_ID_MASK 0xfffffff0 + +#define cpu_is_ixp42x() ((processor_id & IXP4XX_PROCESSOR_ID_MASK) == \ + IXP425_PROCESSOR_ID_VALUE) +#define cpu_is_ixp43x() ((processor_id & IXP4XX_PROCESSOR_ID_MASK) == \ + IXP435_PROCESSOR_ID_VALUE) +#define cpu_is_ixp46x() ((processor_id & IXP4XX_PROCESSOR_ID_MASK) == \ + IXP465_PROCESSOR_ID_VALUE) + +#endif /* _ASM_ARCH_CPU_H */ diff --git a/include/asm-arm/arch-ixp4xx/dsmg600.h b/include/asm-arm/arch-ixp4xx/dsmg600.h new file mode 100644 index 00000000000..a19605ad240 --- /dev/null +++ b/include/asm-arm/arch-ixp4xx/dsmg600.h @@ -0,0 +1,57 @@ +/* + * DSM-G600 platform specific definitions + * + * Copyright (C) 2006 Tower Technologies + * Author: Alessandro Zummo <a.zummo@towertech.it> + * + * based on ixdp425.h: + * Copyright 2004 (C) MontaVista, Software, Inc. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_HARDWARE_H__ +#error "Do not include this directly, instead #include <asm/hardware.h>" +#endif + +#define DSMG600_SDA_PIN 5 +#define DSMG600_SCL_PIN 4 + +/* + * DSMG600 PCI IRQs + */ +#define DSMG600_PCI_MAX_DEV 4 +#define DSMG600_PCI_IRQ_LINES 3 + + +/* PCI controller GPIO to IRQ pin mappings */ +#define DSMG600_PCI_INTA_PIN 11 +#define DSMG600_PCI_INTB_PIN 10 +#define DSMG600_PCI_INTC_PIN 9 +#define DSMG600_PCI_INTD_PIN 8 +#define DSMG600_PCI_INTE_PIN 7 +#define DSMG600_PCI_INTF_PIN 6 + +/* DSM-G600 Timer Setting */ +#define DSMG600_FREQ 66000000 + +/* Buttons */ + +#define DSMG600_PB_GPIO 15 /* power button */ +#define DSMG600_PB_BM (1L << DSMG600_PB_GPIO) + +#define DSMG600_RB_GPIO 3 /* reset button */ + +#define DSMG600_RB_IRQ IRQ_IXP4XX_GPIO3 + +#define DSMG600_PO_GPIO 2 /* power off */ + +/* LEDs */ + +#define DSMG600_LED_PWR_GPIO 0 +#define DSMG600_LED_PWR_BM (1L << DSMG600_LED_PWR_GPIO) + +#define DSMG600_LED_WLAN_GPIO 14 +#define DSMG600_LED_WLAN_BM (1L << DSMG600_LED_WLAN_GPIO) diff --git a/include/asm-arm/arch-ixp4xx/entry-macro.S b/include/asm-arm/arch-ixp4xx/entry-macro.S index dadb568b7ef..f144a005ed9 100644 --- a/include/asm-arm/arch-ixp4xx/entry-macro.S +++ b/include/asm-arm/arch-ixp4xx/entry-macro.S @@ -31,9 +31,9 @@ 1001: /* - * IXP465 has an upper IRQ status register + * IXP465/IXP435 has an upper IRQ status register */ -#if defined(CONFIG_CPU_IXP46X) +#if defined(CONFIG_CPU_IXP46X) || defined(CONFIG_CPU_IXP43X) ldr \irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP2_OFFSET) ldr \irqstat, [\irqstat] @ get upper interrupts mov \irqnr, #63 diff --git a/include/asm-arm/arch-ixp4xx/gpio.h b/include/asm-arm/arch-ixp4xx/gpio.h new file mode 100644 index 00000000000..3a4c5b8ae9e --- /dev/null +++ b/include/asm-arm/arch-ixp4xx/gpio.h @@ -0,0 +1,73 @@ +/* + * linux/include/asm-arm/arch-ixp4xx/gpio.h |