diff options
Diffstat (limited to 'include')
666 files changed, 35066 insertions, 30843 deletions
diff --git a/include/asm-generic/bitops/count_zeros.h b/include/asm-generic/bitops/count_zeros.h new file mode 100644 index 00000000000..97520d21fe6 --- /dev/null +++ b/include/asm-generic/bitops/count_zeros.h @@ -0,0 +1,57 @@ +/* Count leading and trailing zeros functions + * + * Copyright (C) 2012 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_GENERIC_BITOPS_COUNT_ZEROS_H_ +#define _ASM_GENERIC_BITOPS_COUNT_ZEROS_H_ + +#include <asm/bitops.h> + +/** + * count_leading_zeros - Count the number of zeros from the MSB back + * @x: The value + * + * Count the number of leading zeros from the MSB going towards the LSB in @x. + * + * If the MSB of @x is set, the result is 0. + * If only the LSB of @x is set, then the result is BITS_PER_LONG-1. + * If @x is 0 then the result is COUNT_LEADING_ZEROS_0. + */ +static inline int count_leading_zeros(unsigned long x) +{ + if (sizeof(x) == 4) + return BITS_PER_LONG - fls(x); + else + return BITS_PER_LONG - fls64(x); +} + +#define COUNT_LEADING_ZEROS_0 BITS_PER_LONG + +/** + * count_trailing_zeros - Count the number of zeros from the LSB forwards + * @x: The value + * + * Count the number of trailing zeros from the LSB going towards the MSB in @x. + * + * If the LSB of @x is set, the result is 0. + * If only the MSB of @x is set, then the result is BITS_PER_LONG-1. + * If @x is 0 then the result is COUNT_TRAILING_ZEROS_0. + */ +static inline int count_trailing_zeros(unsigned long x) +{ +#define COUNT_TRAILING_ZEROS_0 (-1) + + if (sizeof(x) == 4) + return ffs(x); + else + return (x != 0) ? __ffs(x) : COUNT_TRAILING_ZEROS_0; +} + +#endif /* _ASM_GENERIC_BITOPS_COUNT_ZEROS_H_ */ diff --git a/include/asm-generic/module.h b/include/asm-generic/module.h index ed5b44de4c9..14dc41d185a 100644 --- a/include/asm-generic/module.h +++ b/include/asm-generic/module.h @@ -5,18 +5,44 @@ * Many architectures just need a simple module * loader without arch specific data. */ +#ifndef CONFIG_HAVE_MOD_ARCH_SPECIFIC struct mod_arch_specific { }; +#endif #ifdef CONFIG_64BIT -#define Elf_Shdr Elf64_Shdr -#define Elf_Sym Elf64_Sym -#define Elf_Ehdr Elf64_Ehdr -#else -#define Elf_Shdr Elf32_Shdr -#define Elf_Sym Elf32_Sym -#define Elf_Ehdr Elf32_Ehdr +#define Elf_Shdr Elf64_Shdr +#define Elf_Phdr Elf64_Phdr +#define Elf_Sym Elf64_Sym +#define Elf_Dyn Elf64_Dyn +#define Elf_Ehdr Elf64_Ehdr +#define Elf_Addr Elf64_Addr +#ifdef CONFIG_MODULES_USE_ELF_REL +#define Elf_Rel Elf64_Rel +#endif +#ifdef CONFIG_MODULES_USE_ELF_RELA +#define Elf_Rela Elf64_Rela +#endif +#define ELF_R_TYPE(X) ELF64_R_TYPE(X) +#define ELF_R_SYM(X) ELF64_R_SYM(X) + +#else /* CONFIG_64BIT */ + +#define Elf_Shdr Elf32_Shdr +#define Elf_Phdr Elf32_Phdr +#define Elf_Sym Elf32_Sym +#define Elf_Dyn Elf32_Dyn +#define Elf_Ehdr Elf32_Ehdr +#define Elf_Addr Elf32_Addr +#ifdef CONFIG_MODULES_USE_ELF_REL +#define Elf_Rel Elf32_Rel +#endif +#ifdef CONFIG_MODULES_USE_ELF_RELA +#define Elf_Rela Elf32_Rela +#endif +#define ELF_R_TYPE(X) ELF32_R_TYPE(X) +#define ELF_R_SYM(X) ELF32_R_SYM(X) #endif #endif /* __ASM_GENERIC_MODULE_H */ diff --git a/include/crypto/public_key.h b/include/crypto/public_key.h new file mode 100644 index 00000000000..f5b0224c996 --- /dev/null +++ b/include/crypto/public_key.h @@ -0,0 +1,108 @@ +/* Asymmetric public-key algorithm definitions + * + * See Documentation/crypto/asymmetric-keys.txt + * + * Copyright (C) 2012 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _LINUX_PUBLIC_KEY_H +#define _LINUX_PUBLIC_KEY_H + +#include <linux/mpi.h> + +enum pkey_algo { + PKEY_ALGO_DSA, + PKEY_ALGO_RSA, + PKEY_ALGO__LAST +}; + +extern const char *const pkey_algo[PKEY_ALGO__LAST]; + +enum pkey_hash_algo { + PKEY_HASH_MD4, + PKEY_HASH_MD5, + PKEY_HASH_SHA1, + PKEY_HASH_RIPE_MD_160, + PKEY_HASH_SHA256, + PKEY_HASH_SHA384, + PKEY_HASH_SHA512, + PKEY_HASH_SHA224, + PKEY_HASH__LAST +}; + +extern const char *const pkey_hash_algo[PKEY_HASH__LAST]; + +enum pkey_id_type { + PKEY_ID_PGP, /* OpenPGP generated key ID */ + PKEY_ID_X509, /* X.509 arbitrary subjectKeyIdentifier */ + PKEY_ID_TYPE__LAST +}; + +extern const char *const pkey_id_type[PKEY_ID_TYPE__LAST]; + +/* + * Cryptographic data for the public-key subtype of the asymmetric key type. + * + * Note that this may include private part of the key as well as the public + * part. + */ +struct public_key { + const struct public_key_algorithm *algo; + u8 capabilities; +#define PKEY_CAN_ENCRYPT 0x01 +#define PKEY_CAN_DECRYPT 0x02 +#define PKEY_CAN_SIGN 0x04 +#define PKEY_CAN_VERIFY 0x08 + enum pkey_id_type id_type : 8; + union { + MPI mpi[5]; + struct { + MPI p; /* DSA prime */ + MPI q; /* DSA group order */ + MPI g; /* DSA group generator */ + MPI y; /* DSA public-key value = g^x mod p */ + MPI x; /* DSA secret exponent (if present) */ + } dsa; + struct { + MPI n; /* RSA public modulus */ + MPI e; /* RSA public encryption exponent */ + MPI d; /* RSA secret encryption exponent (if present) */ + MPI p; /* RSA secret prime (if present) */ + MPI q; /* RSA secret prime (if present) */ + } rsa; + }; +}; + +extern void public_key_destroy(void *payload); + +/* + * Public key cryptography signature data + */ +struct public_key_signature { + u8 *digest; + u8 digest_size; /* Number of bytes in digest */ + u8 nr_mpi; /* Occupancy of mpi[] */ + enum pkey_hash_algo pkey_hash_algo : 8; + union { + MPI mpi[2]; + struct { + MPI s; /* m^d mod n */ + } rsa; + struct { + MPI r; + MPI s; + } dsa; + }; +}; + +struct key; +extern int verify_signature(const struct key *key, + const struct public_key_signature *sig); + +#endif /* _LINUX_PUBLIC_KEY_H */ diff --git a/include/keys/asymmetric-parser.h b/include/keys/asymmetric-parser.h new file mode 100644 index 00000000000..09b3b4807f5 --- /dev/null +++ b/include/keys/asymmetric-parser.h @@ -0,0 +1,37 @@ +/* Asymmetric public-key cryptography data parser + * + * See Documentation/crypto/asymmetric-keys.txt + * + * Copyright (C) 2012 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _KEYS_ASYMMETRIC_PARSER_H +#define _KEYS_ASYMMETRIC_PARSER_H + +/* + * Key data parser. Called during key instantiation. + */ +struct asymmetric_key_parser { + struct list_head link; + struct module *owner; + const char *name; + + /* Attempt to parse a key from the data blob passed to add_key() or + * keyctl_instantiate(). Should also generate a proposed description + * that the caller can optionally use for the key. + * + * Return EBADMSG if not recognised. + */ + int (*parse)(struct key_preparsed_payload *prep); +}; + +extern int register_asymmetric_key_parser(struct asymmetric_key_parser *); +extern void unregister_asymmetric_key_parser(struct asymmetric_key_parser *); + +#endif /* _KEYS_ASYMMETRIC_PARSER_H */ diff --git a/include/keys/asymmetric-subtype.h b/include/keys/asymmetric-subtype.h new file mode 100644 index 00000000000..4b840e82220 --- /dev/null +++ b/include/keys/asymmetric-subtype.h @@ -0,0 +1,55 @@ +/* Asymmetric public-key cryptography key subtype + * + * See Documentation/security/asymmetric-keys.txt + * + * Copyright (C) 2012 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _KEYS_ASYMMETRIC_SUBTYPE_H +#define _KEYS_ASYMMETRIC_SUBTYPE_H + +#include <linux/seq_file.h> +#include <keys/asymmetric-type.h> + +struct public_key_signature; + +/* + * Keys of this type declare a subtype that indicates the handlers and + * capabilities. + */ +struct asymmetric_key_subtype { + struct module *owner; + const char *name; + unsigned short name_len; /* length of name */ + + /* Describe a key of this subtype for /proc/keys */ + void (*describe)(const struct key *key, struct seq_file *m); + + /* Destroy a key of this subtype */ + void (*destroy)(void *payload); + + /* Verify the signature on a key of this subtype (optional) */ + int (*verify_signature)(const struct key *key, + const struct public_key_signature *sig); +}; + +/** + * asymmetric_key_subtype - Get the subtype from an asymmetric key + * @key: The key of interest. + * + * Retrieves and returns the subtype pointer of the asymmetric key from the + * type-specific data attached to the key. + */ +static inline +struct asymmetric_key_subtype *asymmetric_key_subtype(const struct key *key) +{ + return key->type_data.p[0]; +} + +#endif /* _KEYS_ASYMMETRIC_SUBTYPE_H */ diff --git a/include/keys/asymmetric-type.h b/include/keys/asymmetric-type.h new file mode 100644 index 00000000000..7dd47349618 --- /dev/null +++ b/include/keys/asymmetric-type.h @@ -0,0 +1,25 @@ +/* Asymmetric Public-key cryptography key type interface + * + * See Documentation/security/asymmetric-keys.txt + * + * Copyright (C) 2012 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _KEYS_ASYMMETRIC_TYPE_H +#define _KEYS_ASYMMETRIC_TYPE_H + +#include <linux/key-type.h> + +extern struct key_type key_type_asymmetric; + +/* + * The payload is at the discretion of the subtype. + */ + +#endif /* _KEYS_ASYMMETRIC_TYPE_H */ diff --git a/include/keys/user-type.h b/include/keys/user-type.h index bc9ec1d7698..5e452c84f1e 100644 --- a/include/keys/user-type.h +++ b/include/keys/user-type.h @@ -35,8 +35,10 @@ struct user_key_payload { extern struct key_type key_type_user; extern struct key_type key_type_logon; -extern int user_instantiate(struct key *key, const void *data, size_t datalen); -extern int user_update(struct key *key, const void *data, size_t datalen); +struct key_preparsed_payload; + +extern int user_instantiate(struct key *key, struct key_preparsed_payload *prep); +extern int user_update(struct key *key, struct key_preparsed_payload *prep); extern int user_match(const struct key *key, const void *criterion); extern void user_revoke(struct key *key); extern void user_destroy(struct key *key); diff --git a/include/linux/Kbuild b/include/linux/Kbuild index d114db9477f..5b57367e28d 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -22,390 +22,10 @@ header-y += wimax/ ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/a.out.h \ $(srctree)/arch/$(SRCARCH)/include/uapi/asm/a.out.h),) -header-y += a.out.h endif ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm.h \ $(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm.h),) -header-y += kvm.h endif ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm_para.h \ $(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm_para.h),) -header-y += kvm_para.h endif - -header-y += acct.h -header-y += adb.h -header-y += adfs_fs.h -header-y += affs_hardblocks.h -header-y += agpgart.h -header-y += aio_abi.h -header-y += apm_bios.h -header-y += arcfb.h -header-y += atalk.h -header-y += atm.h -header-y += atm_eni.h -header-y += atm_he.h -header-y += atm_idt77105.h -header-y += atm_nicstar.h -header-y += atm_tcp.h -header-y += atm_zatm.h -header-y += atmapi.h -header-y += atmarp.h -header-y += atmbr2684.h -header-y += atmclip.h -header-y += atmdev.h -header-y += atmioc.h -header-y += atmlec.h -header-y += atmmpc.h -header-y += atmppp.h -header-y += atmsap.h -header-y += atmsvc.h -header-y += audit.h -header-y += auto_fs.h -header-y += auto_fs4.h -header-y += auxvec.h -header-y += ax25.h -header-y += b1lli.h -header-y += baycom.h -header-y += bfs_fs.h -header-y += binfmts.h -header-y += blk_types.h -header-y += blkpg.h -header-y += blktrace_api.h -header-y += bpqether.h -header-y += bsg.h -header-y += can.h -header-y += capability.h -header-y += capi.h -header-y += cciss_defs.h -header-y += cciss_ioctl.h -header-y += cdrom.h -header-y += cgroupstats.h -header-y += chio.h -header-y += cm4000_cs.h -header-y += cn_proc.h -header-y += coda.h -header-y += coda_psdev.h -header-y += coff.h -header-y += connector.h -header-y += const.h -header-y += cramfs_fs.h -header-y += cuda.h -header-y += cyclades.h -header-y += cycx_cfm.h -header-y += dcbnl.h -header-y += dccp.h -header-y += dlm.h -header-y += dlm_device.h -header-y += dlm_netlink.h -header-y += dlm_plock.h -header-y += dlmconstants.h -header-y += dm-ioctl.h -header-y += dm-log-userspace.h -header-y += dn.h -header-y += dqblk_xfs.h -header-y += edd.h -header-y += efs_fs_sb.h -header-y += elf-em.h -header-y += elf-fdpic.h -header-y += elf.h -header-y += elfcore.h -header-y += errno.h -header-y += errqueue.h -header-y += ethtool.h -header-y += eventpoll.h -header-y += fadvise.h -header-y += falloc.h -header-y += fanotify.h -header-y += fb.h -header-y += fcntl.h -header-y += fd.h -header-y += fdreg.h -header-y += fib_rules.h -header-y += fiemap.h -header-y += filter.h -header-y += firewire-cdev.h -header-y += firewire-constants.h -header-y += flat.h -header-y += fs.h -header-y += fsl_hypervisor.h -header-y += fuse.h -header-y += futex.h -header-y += gameport.h -header-y += gen_stats.h -header-y += genetlink.h -header-y += gfs2_ondisk.h -header-y += gigaset_dev.h -header-y += hdlc.h -header-y += hdlcdrv.h -header-y += hdreg.h -header-y += hid.h -header-y += hiddev.h -header-y += hidraw.h -header-y += hpet.h -header-y += hysdn_if.h -header-y += i2c-dev.h -header-y += i2c.h -header-y += i2o-dev.h -header-y += i8k.h -header-y += icmp.h -header-y += icmpv6.h -header-y += if.h -header-y += if_addr.h -header-y += if_addrlabel.h -header-y += if_alg.h -header-y += if_arcnet.h -header-y += if_arp.h -header-y += if_bonding.h -header-y += if_bridge.h -header-y += if_cablemodem.h -header-y += if_eql.h -header-y += if_ether.h -header-y += if_fc.h -header-y += if_fddi.h -header-y += if_frad.h -header-y += if_hippi.h -header-y += if_infiniband.h -header-y += if_link.h -header-y += if_ltalk.h -header-y += if_packet.h -header-y += if_phonet.h -header-y += if_plip.h -header-y += if_ppp.h -header-y += if_pppol2tp.h -header-y += if_pppox.h -header-y += if_slip.h -header-y += if_team.h -header-y += if_tun.h -header-y += if_tunnel.h -header-y += if_vlan.h -header-y += if_x25.h -header-y += igmp.h -header-y += in.h -header-y += in6.h -header-y += in_route.h -header-y += sock_diag.h -header-y += inet_diag.h -header-y += unix_diag.h -header-y += packet_diag.h -header-y += inotify.h -header-y += input.h -header-y += ioctl.h -header-y += ip.h -header-y += ip6_tunnel.h -header-y += ip_vs.h -header-y += ipc.h -header-y += ipmi.h -header-y += ipmi_msgdefs.h -header-y += ipsec.h -header-y += ipv6.h -header-y += ipv6_route.h -header-y += ipx.h -header-y += irda.h -header-y += irqnr.h -header-y += isdn.h -header-y += isdn_divertif.h -header-y += isdn_ppp.h -header-y += isdnif.h -header-y += iso_fs.h -header-y += ivtv.h -header-y += ivtvfb.h -header-y += ixjuser.h -header-y += jffs2.h -header-y += joystick.h -header-y += kd.h -header-y += kdev_t.h -header-y += kernel.h -header-y += kernelcapi.h -header-y += kernel-page-flags.h -header-y += kexec.h -header-y += keyboard.h -header-y += keyctl.h -header-y += l2tp.h -header-y += limits.h -header-y += llc.h -header-y += loop.h -header-y += lp.h -header-y += magic.h -header-y += major.h -header-y += map_to_7segment.h -header-y += matroxfb.h -header-y += mdio.h -header-y += media.h -header-y += mei.h -header-y += mempolicy.h -header-y += meye.h -header-y += mii.h -header-y += minix_fs.h -header-y += mman.h -header-y += mmtimer.h -header-y += mqueue.h -header-y += mroute.h -header-y += mroute6.h -header-y += msdos_fs.h -header-y += msg.h -header-y += mtio.h -header-y += n_r3964.h -header-y += nbd.h -header-y += ncp.h -header-y += ncp_fs.h -header-y += ncp_mount.h -header-y += ncp_no.h -header-y += neighbour.h -header-y += net.h -header-y += net_dropmon.h -header-y += net_tstamp.h -header-y += netdevice.h -header-y += netfilter.h -header-y += netfilter_arp.h -header-y += netfilter_bridge.h -header-y += netfilter_decnet.h -header-y += netfilter_ipv4.h -header-y += netfilter_ipv6.h -header-y += netlink.h -header-y += netrom.h -header-y += nfc.h -header-y += nfs.h -header-y += nfs2.h -header-y += nfs3.h -header-y += nfs4.h -header-y += nfs4_mount.h -header-y += nfs_fs.h -header-y += nfs_idmap.h -header-y += nfs_mount.h -header-y += nfsacl.h -header-y += nl80211.h -header-y += nubus.h -header-y += nvram.h -header-y += omap3isp.h -header-y += omapfb.h -header-y += oom.h -header-y += param.h -header-y += parport.h -header-y += patchkey.h -header-y += pci.h -header-y += pci_regs.h -header-y += perf_event.h -header-y += personality.h -header-y += pfkeyv2.h -header-y += pg.h -header-y += phantom.h -header-y += phonet.h -header-y += pkt_cls.h -header-y += pkt_sched.h -header-y += pktcdvd.h -header-y += pmu.h -header-y += poll.h -header-y += posix_types.h -header-y += ppdev.h -header-y += ppp-comp.h -header-y += ppp-ioctl.h -header-y += ppp_defs.h -header-y += pps.h -header-y += prctl.h -header-y += ptp_clock.h -header-y += ptrace.h -header-y += qnx4_fs.h -header-y += qnxtypes.h -header-y += quota.h -header-y += radeonfb.h -header-y += random.h -header-y += raw.h -header-y += rds.h -header-y += reboot.h -header-y += reiserfs_fs.h -header-y += reiserfs_xattr.h -header-y += resource.h -header-y += rfkill.h -header-y += romfs_fs.h -header-y += rose.h -header-y += route.h -header-y += rtc.h -header-y += rtnetlink.h -header-y += scc.h -header-y += sched.h -header-y += screen_info.h -header-y += sdla.h -header-y += seccomp.h -header-y += securebits.h -header-y += selinux_netlink.h -header-y += sem.h -header-y += serial.h -header-y += serial_core.h -header-y += serial_reg.h -header-y += serio.h -header-y += shm.h -header-y += signal.h -header-y += signalfd.h -header-y += snmp.h -header-y += socket.h -header-y += sockios.h -header-y += som.h -header-y += sonet.h -header-y += sonypi.h -header-y += sound.h -header-y += soundcard.h -header-y += stat.h -header-y += stddef.h -header-y += string.h -header-y += suspend_ioctls.h -header-y += swab.h -header-y += synclink.h -header-y += sysctl.h -header-y += sysinfo.h -header-y += taskstats.h -header-y += tcp.h -header-y += tcp_metrics.h -header-y += telephony.h -header-y += termios.h -header-y += time.h -header-y += times.h -header-y += timex.h -header-y += tiocl.h -header-y += tipc.h -header-y += tipc_config.h -header-y += toshiba.h -header-y += tty.h -header-y += tty_flags.h -header-y += types.h -header-y += udf_fs_i.h -header-y += udp.h -header-y += uhid.h -header-y += uinput.h -header-y += uio.h -header-y += ultrasound.h -header-y += un.h -header-y += unistd.h -header-y += usbdevice_fs.h -header-y += utime.h -header-y += utsname.h -header-y += uuid.h -header-y += uvcvideo.h -header-y += v4l2-common.h -header-y += v4l2-controls.h -header-y += v4l2-dv-timings.h -header-y += v4l2-mediabus.h -header-y += v4l2-subdev.h -header-y += veth.h -header-y += vfio.h -header-y += vhost.h -header-y += videodev2.h -header-y += virtio_9p.h -header-y += virtio_balloon.h -header-y += virtio_blk.h -header-y += virtio_config.h -header-y += virtio_console.h -header-y += virtio_ids.h -header-y += virtio_net.h -header-y += virtio_pci.h -header-y += virtio_ring.h -header-y += virtio_rng.h -header-y += vt.h -header-y += wait.h -header-y += wanrouter.h -header-y += watchdog.h -header-y += wimax.h -header-y += wireless.h -header-y += x25.h -header-y += xattr.h -header-y += xfrm.h diff --git a/include/linux/a.out.h b/include/linux/a.out.h index e86dfca4458..220f1433889 100644 --- a/include/linux/a.out.h +++ b/include/linux/a.out.h @@ -1,278 +1,84 @@ #ifndef __A_OUT_GNU_H__ #define __A_OUT_GNU_H__ -#define __GNU_EXEC_MACROS__ - -#ifndef __STRUCT_EXEC_OVERRIDE__ - -#include <asm/a.out.h> - -#endif /* __STRUCT_EXEC_OVERRIDE__ */ +#include <uapi/linux/a.out.h> #ifndef __ASSEMBLY__ - -/* these go in the N_MACHTYPE field */ -enum machine_type { #if defined (M_OLDSUN2) - M__OLDSUN2 = M_OLDSUN2, #else - M_OLDSUN2 = 0, #endif #if defined (M_68010) - M__68010 = M_68010, #else - M_68010 = 1, #endif #if defined (M_68020) - M__68020 = M_68020, #else - M_68020 = 2, #endif #if defined (M_SPARC) - M__SPARC = M_SPARC, #else - M_SPARC = 3, #endif - /* skip a bunch so we don't run into any of sun's numbers */ - M_386 = 100, - M_MIPS1 = 151, /* MIPS R3000/R3000 binary */ - M_MIPS2 = 152 /* MIPS R6000/R4000 binary */ -}; - #if !defined (N_MAGIC) -#define N_MAGIC(exec) ((exec).a_info & 0xffff) #endif -#define N_MACHTYPE(exec) ((enum machine_type)(((exec).a_info >> 16) & 0xff)) -#define N_FLAGS(exec) (((exec).a_info >> 24) & 0xff) -#define N_SET_INFO(exec, magic, type, flags) \ - ((exec).a_info = ((magic) & 0xffff) \ - | (((int)(type) & 0xff) << 16) \ - | (((flags) & 0xff) << 24)) -#define N_SET_MAGIC(exec, magic) \ - ((exec).a_info = (((exec).a_info & 0xffff0000) | ((magic) & 0xffff))) - -#define N_SET_MACHTYPE(exec, machtype) \ - ((exec).a_info = \ - ((exec).a_info&0xff00ffff) | ((((int)(machtype))&0xff) << 16)) - -#define N_SET_FLAGS(exec, flags) \ - ((exec).a_info = \ - ((exec).a_info&0x00ffffff) | (((flags) & 0xff) << 24)) - -/* Code indicating object file or impure executable. */ -#define OMAGIC 0407 -/* Code indicating pure executable. */ -#define NMAGIC 0410 -/* Code indicating demand-paged executable. */ -#define ZMAGIC 0413 -/* This indicates a demand-paged executable with the header in the text. - The first page is unmapped to help trap NULL pointer references */ -#define QMAGIC 0314 - -/* Code indicating core file. */ -#define CMAGIC 0421 - #if !defined (N_BADMAG) -#define N_BADMAG(x) (N_MAGIC(x) != OMAGIC \ - && N_MAGIC(x) != NMAGIC \ - && N_MAGIC(x) != ZMAGIC \ - && N_MAGIC(x) != QMAGIC) #endif - -#define _N_HDROFF(x) (1024 - sizeof (struct exec)) - #if !defined (N_TXTOFF) -#define N_TXTOFF(x) \ - (N_MAGIC(x) == ZMAGIC ? _N_HDROFF((x)) + sizeof (struct exec) : \ - (N_MAGIC(x) == QMAGIC ? 0 : sizeof (struct exec))) #endif - #if !defined (N_DATOFF) -#define N_DATOFF(x) (N_TXTOFF(x) + (x).a_text) #endif - #if !defined (N_TRELOFF) -#define N_TRELOFF(x) (N_DATOFF(x) + (x).a_data) #endif - #if !defined (N_DRELOFF) -#define N_DRELOFF(x) (N_TRELOFF(x) + N_TRSIZE(x)) #endif - #if !defined (N_SYMOFF) -#define N_SYMOFF(x) (N_DRELOFF(x) + N_DRSIZE(x)) #endif - #if !defined (N_STROFF) -#define N_STROFF(x) (N_SYMOFF(x) + N_SYMSIZE(x)) #endif - -/* Address of text segment in memory after it is loaded. */ #if !defined (N_TXTADDR) -#define N_TXTADDR(x) (N_MAGIC(x) == QMAGIC ? PAGE_SIZE : 0) #endif - -/* Address of data segment in memory after it is loaded. - Note that it is up to you to define SEGMENT_SIZE - on machines not listed here. */ #if defined(vax) || defined(hp300) || defined(pyr) -#define SEGMENT_SIZE page_size #endif #ifdef sony -#define SEGMENT_SIZE 0x2000 #endif /* Sony. */ #ifdef is68k -#define SEGMENT_SIZE 0x20000 #endif #if defined(m68k) && defined(PORTAR) -#define PAGE_SIZE 0x400 -#define SEGMENT_SIZE PAGE_SIZE #endif - #ifdef linux -#ifdef __KERNEL__ #include <asm/page.h> -#else -#include <unistd.h> -#endif #if defined(__i386__) || defined(__mc68000__) -#define SEGMENT_SIZE 1024 #else #ifndef SEGMENT_SIZE -#ifdef __KERNEL__ #define SEGMENT_SIZE PAGE_SIZE -#else -#define SEGMENT_SIZE getpagesize() -#endif #endif #endif #endif - -#define _N_SEGMENT_ROUND(x) ALIGN(x, SEGMENT_SIZE) - -#define _N_TXTENDADDR(x) (N_TXTADDR(x)+(x).a_text) - #ifndef N_DATADDR -#define N_DATADDR(x) \ - (N_MAGIC(x)==OMAGIC? (_N_TXTENDADDR(x)) \ - : (_N_SEGMENT_ROUND (_N_TXTENDADDR(x)))) #endif - -/* Address of bss segment in memory after it is loaded. */ #if !defined (N_BSSADDR) -#define N_BSSADDR(x) (N_DATADDR(x) + (x).a_data) #endif - #if !defined (N_NLIST_DECLARED) -struct nlist { - union { - char *n_name; - struct nlist *n_next; - long n_strx; - } n_un; - unsigned char n_type; - char n_other; - short n_desc; - unsigned long n_value; -}; #endif /* no N_NLIST_DECLARED. */ - #if !defined (N_UNDF) -#define N_UNDF 0 #endif #if !defined (N_ABS) -#define N_ABS 2 #endif #if !defined (N_TEXT) -#define N_TEXT 4 #endif #if !defined (N_DATA) -#define N_DATA 6 #endif #if !defined (N_BSS) -#define N_BSS 8 #endif #if !defined (N_FN) -#define N_FN 15 #endif - #if !defined (N_EXT) -#define N_EXT 1 #endif #if !defined (N_TYPE) -#define N_TYPE 036 #endif #if !defined (N_STAB) -#define N_STAB 0340 #endif - -/* The following type indicates the definition of a symbol as being - an indirect reference to another symbol. The other symbol - appears as an undefined reference, immediately following this symbol. - - Indirection is asymmetrical. The other symbol's value will be used - to satisfy requests for the indirect symbol, but not vice versa. - If the other symbol does not have a definition, libraries will - be searched to find a definition. */ -#define N_INDR 0xa - -/* The following symbols refer to set elements. - All the N_SET[ATDB] symbols with the same name form one set. - Space is allocated for the set in the text section, and each set - element's value is stored into one word of the space. - The first word of the space is the length of the set (number of elements). - - The address of the set is made into an N_SETV symbol - whose name is the same as the name of the set. - This symbol acts like a N_DATA global symbol - in that it can satisfy undefined external references. */ - -/* These appear as input to LD, in a .o file. */ -#define N_SETA 0x14 /* Absolute set element symbol */ -#define N_SETT 0x16 /* Text set element symbol */ -#define N_SETD 0x18 /* Data set element symbol */ -#define N_SETB 0x1A /* Bss set element symbol */ - -/* This is output from LD. */ -#define N_SETV 0x1C /* Pointer to set vector in data area. */ - #if !defined (N_RELOCATION_INFO_DECLARED) -/* This structure describes a single relocation to be performed. - The text-relocation section of the file is a vector of these structures, - all of which apply to the text section. - Likewise, the data-relocation section applies to the data section. */ - -struct relocation_info -{ - /* Address (within segment) to be relocated. */ - int r_address; - /* The meaning of r_symbolnum depends on r_extern. */ - unsigned int r_symbolnum:24; - /* Nonzero means value is a pc-relative offset - and it should be relocated for changes in its own address - as well as for changes in the symbol or section specified. */ - unsigned int r_pcrel:1; - /* Length (as exponent of 2) of the field to be relocated. - Thus, a value of 2 indicates 1<<2 bytes. */ - unsigned int r_length:2; - /* 1 => relocate with value of symbol. - r_symbolnum is the index of the symbol - in file's the symbol table. - 0 => relocate with the address of a segment. - r_symbolnum is N_TEXT, N_DATA, N_BSS or N_ABS - (the N_EXT bit may be set also, but signifies nothing). */ - unsigned int r_extern:1; - /* Four bits that aren't used, but when writing an object file - it is desirable to clear them. */ #ifdef NS32K - unsigned r_bsr:1; - unsigned r_disp:1; - unsigned r_pad:2; #else - unsigned int r_pad:4; #endif -}; #endif /* no N_RELOCATION_INFO_DECLARED. */ - #endif /*__ASSEMBLY__ */ #endif /* __A_OUT_GNU_H__ */ diff --git a/include/linux/acct.h b/include/linux/acct.h index d537aa0ec41..4a5b7cb5607 100644 --- a/include/linux/acct.h +++ b/include/linux/acct.h @@ -11,109 +11,11 @@ * Copyright (C) 1995 - 1997 Marco van Wieringen - ELM Consultancy B.V. * */ - #ifndef _LINUX_ACCT_H #define _LINUX_ACCT_H -#include <linux/types.h> - -#include <asm/param.h> -#include <asm/byteorder.h> - -/* - * comp_t is a 16-bit "floating" point number with a 3-bit base 8 - * exponent and a 13-bit fraction. - * comp2_t is 24-bit with 5-bit base 2 exponent and 20 bit fraction - * (leading 1 not stored). - * See linux/kernel/acct.c for the specific encoding systems used. - */ - -typedef __u16 comp_t; -typedef __u32 comp2_t; - -/* - * accounting file record - * - * This structure contains all of the information written out to the - * process accounting file whenever a process exits. - */ +#include <uapi/linux/acct.h> -#define ACCT_COMM 16 - -struct acct -{ - char ac_flag; /* Flags */ - char ac_version; /* Always set to ACCT_VERSION */ - /* for binary compatibility back until 2.0 */ - __u16 ac_uid16; /* LSB of Real User ID */ - __u16 ac_gid16; /* LSB of Real Group ID */ - __u16 ac_tty; /* Control Terminal */ - __u32 ac_btime; /* Process Creation Time */ - comp_t ac_utime; /* User Time */ - comp_t ac_stime; /* System Time */ - comp_t ac_etime; /* Elapsed Time */ - comp_t ac_mem; /* Average Memory Usage */ - comp_t ac_io; /* Chars Transferred */ - comp_t ac_rw; /* Blocks Read or Written */ - comp_t ac_minflt; /* Minor Pagefaults */ - comp_t ac_majflt; /* Major Pagefaults */ - comp_t ac_swaps; /* Number of Swaps */ -/* m68k had no padding here. */ -#if !defined(CONFIG_M68K) || !defined(__KERNEL__) - __u16 ac_ahz; /* AHZ */ -#endif - __u32 ac_exitcode; /* Exitcode */ - char ac_comm[ACCT_COMM + 1]; /* Command Name */ - __u8 ac_etime_hi; /* Elapsed Time MSB */ - __u16 ac_etime_lo; /* Elapsed Time LSB */ - __u32 ac_uid; /* Real User ID */ - __u32 ac_gid; /* Real Group ID */ -}; - -struct acct_v3 -{ - char ac_flag; /* Flags */ - char ac_version; /* Always set to ACCT_VERSION */ - __u16 ac_tty; /* Control Terminal */ - __u32 ac_exitcode; /* Exitcode */ - __u32 ac_uid; /* Real User ID */ - __u32 ac_gid; /* Real Group ID */ - __u32 ac_pid; /* Process ID */ - __u32 ac_ppid; /* Parent Process ID */ - __u32 ac_btime; /* Process Creation Time */ -#ifdef __KERNEL__ - __u32 ac_etime; /* Elapsed Time */ -#else - float ac_etime; /* Elapsed Time */ -#endif - comp_t ac_utime; /* User Time */ - comp_t ac_stime; /* System Time */ - comp_t ac_mem; /* Average Memory Usage */ - comp_t ac_io; /* Chars Transferred */ - comp_t ac_rw; /* Blocks Read or Written */ - comp_t ac_minflt; /* Minor Pagefaults */ - comp_t ac_majflt; /* Major Pagefaults */ - comp_t ac_swaps; /* Number of Swaps */ - char ac_comm[ACCT_COMM]; /* Command Name */ -}; - -/* - * accounting flags - */ - /* bit set when the process ... */ -#define AFORK 0x01 /* ... executed fork, but did not exec */ -#define ASU 0x02 /* ... used super-user privileges */ -#define ACOMPAT 0x04 /* ... used compatibility mode (VAX only not used) */ -#define ACORE 0x08 /* ... dumped core */ -#define AXSIG 0x10 /* ... was killed by a signal */ - -#ifdef __BIG_ENDIAN -#define ACCT_BYTEORDER 0x80 /* accounting file is big endian */ -#else -#define ACCT_BYTEORDER 0x00 /* accounting file is little endian */ -#endif - -#ifdef __KERNEL__ #ifdef CONFIG_BSD_PROCESS_ACCT @@ -163,12 +65,6 @@ typedef struct acct_v3 acct_t; typedef struct acct acct_t; #endif -#else -#define ACCT_VERSION 2 -#define AHZ (HZ) -#endif /* __KERNEL */ - -#ifdef __KERNEL__ #include <linux/jiffies.h> /* * Yet another set of HZ to *HZ helper functions. @@ -210,6 +106,4 @@ static inline u64 nsec_to_AHZ(u64 x) return x; } -#endif /* __KERNEL */ - #endif /* _LINUX_ACCT_H */ diff --git a/include/linux/adb.h b/include/linux/adb.h index 63bca502fa5..cde41300c7a 100644 --- a/include/linux/adb.h +++ b/include/linux/adb.h @@ -4,43 +4,8 @@ #ifndef __ADB_H #define __ADB_H -/* ADB commands */ -#define ADB_BUSRESET 0 -#define ADB_FLUSH(id) (0x01 | ((id) << 4)) -#define ADB_WRITEREG(id, reg) (0x08 | (reg) | ((id) << 4)) -#define ADB_READREG(id, reg) (0x0C | (reg) | ((id) << 4)) +#include <uapi/linux/adb.h> -/* ADB default device IDs (upper 4 bits of ADB command byte) */ -#define ADB_DONGLE 1 /* "software execution control" devices */ -#define ADB_KEYBOARD 2 -#define ADB_MOUSE 3 -#define ADB_TABLET 4 -#define ADB_MODEM 5 -#define ADB_MISC 7 /* maybe a monitor */ - -#define ADB_RET_OK 0 -#define ADB_RET_TIMEOUT 3 - -/* The kind of ADB request. The controller may emulate some - or all of those CUDA/PMU packet kinds */ -#define ADB_PACKET 0 -#define CUDA_PACKET 1 -#define ERROR_PACKET 2 -#define TIMER_PACKET 3 -#define POWER_PACKET 4 -#define MACIIC_PACKET 5 -#define PMU_PACKET 6 -#define ADB_QUERY 7 - -/* ADB queries */ - -/* ADB_QUERY_GETDEVINFO - * Query ADB slot for device presence - * data[2] = id, rep[0] = orig addr, rep[1] = handler_id - */ -#define ADB_QUERY_GETDEVINFO 1 - -#ifdef __KERNEL__ struct adb_request { unsigned char data[32]; @@ -98,6 +63,4 @@ int adb_reset_bus(void); int adb_try_handler_change(int address, int new_id); int adb_get_infos(int address, int *original_address, int *handler_id); -#endif /* __KERNEL__ */ - #endif /* __ADB_H */ diff --git a/include/linux/adfs_fs.h b/include/linux/adfs_fs.h index b19801f7389..0d991071a9d 100644 --- a/include/linux/adfs_fs.h +++ b/include/linux/adfs_fs.h @@ -1,47 +1,9 @@ #ifndef _ADFS_FS_H #define _ADFS_FS_H -#include <linux/types.h> -#include <linux/magic.h> +#include <uapi/linux/adfs_fs.h> /* - * Disc Record at disc address 0xc00 - */ -struct adfs_discrecord { - __u8 log2secsize; - __u8 secspertrack; - __u8 heads; - __u8 density; - __u8 idlen; - __u8 log2bpmb; - __u8 skew; - __u8 bootoption; - __u8 lowsector; - __u8 nzones; - __le16 zone_spare; - __le32 root; - __le32 disc_size; - __le16 disc_id; - __u8 disc_name[10]; - __le32 disc_type; - __le32 disc_size_high; - __u8 log2sharesize:4; - __u8 unused40:4; - __u8 big_flag:1; - __u8 unused41:1; - __u8 nzones_high; - __le32 format_version; - __le32 root_size; - __u8 unused52[60 - 52]; -}; - -#define ADFS_DISCRECORD (0xc00) -#define ADFS_DR_OFFSET (0x1c0) -#define ADFS_DR_SIZE 60 -#define ADFS_DR_SIZE_BITS (ADFS_DR_SIZE << 3) - -#ifdef __KERNEL__ -/* * Calculate the boot block checksum on an ADFS drive. Note that this will * appear to be correct if the sector contains all zeros, so also check that * the disk size is non-zero!!! @@ -59,5 +21,3 @@ static inline int adfs_checkbblk(unsigned char *ptr) return (result & 0xff) != ptr[511]; } #endif - -#endif diff --git a/include/linux/agpgart.h b/include/linux/agpgart.h index f6778eceb8f..c6b61ca9705 100644 --- a/include/linux/agpgart.h +++ b/include/linux/agpgart.h @@ -23,94 +23,12 @@ * OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. * */ - #ifndef _AGP_H #define _AGP_H 1 -#define AGPIOC_BASE 'A' -#define AGPIOC_INFO _IOR (AGPIOC_BASE, 0, struct agp_info*) -#define AGPIOC_ACQUIRE _IO (AGPIOC_BASE, 1) -#define AGPIOC_RELEASE _IO (AGPIOC_BASE, 2) -#define AGPIOC_SETUP _IOW (AGPIOC_BASE, 3, struct agp_setup*) -#define AGPIOC_RESERVE _IOW (AGPIOC_BASE, 4, struct agp_region*) -#define AGPIOC_PROTECT _IOW (AGPIOC_BASE, 5, struct agp_region*) -#define AGPIOC_ALLOCATE _IOWR(AGPIOC_BASE, 6, struct agp_allocate*) -#define AGPIOC_DEALLOCATE _IOW (AGPIOC_BASE, 7, int) -#define AGPIOC_BIND _IOW (AGPIOC_BASE, 8, struct agp_bind*) -#define AGPIOC_UNBIND _IOW (AGPIOC_BASE, 9, struct agp_unbind*) -#define AGPIOC_CHIPSET_FLUSH _IO (AGPIOC_BASE, 10) - -#define AGP_DEVICE "/dev/agpgart" - -#ifndef TRUE -#define TRUE 1 -#endif - -#ifndef FALSE -#define FALSE 0 -#endif - -#ifndef __KERNEL__ -#include <linux/types.h> - -struct agp_version { - __u16 major; - __u16 minor; -}; - -typedef struct _agp_info { - struct agp_version version; /* version of the driver */ - __u32 bridge_id; /* bridge vendor/device */ - __u32 agp_mode; /* mode info of bridge */ - unsigned long aper_base;/* base of aperture */ - size_t aper_size; /* size of aperture */ - size_t pg_total; /* max pages (swap + system) */ - size_t pg_system; /* max pages (system) */ - size_t pg_used; /* current pages used */ -} agp_info; - -typedef struct _agp_setup { - __u32 agp_mode; /* mode info of bridge */ -} agp_setup; - -/* - * The "prot" down below needs still a "sleep" flag somehow ... - */ -typedef struct _agp_segment { - __kernel_off_t pg_start; /* starting page to populate */ - __kernel_size_t pg_count; /* number of pages */ - int prot; /* prot flags for mmap */ -} agp_segment; - -typedef struct _agp_region { - __kernel_pid_t pid; /* pid of process */ - __kernel_size_t seg_count; /* number of segments */ - struct _agp_segment *seg_list; -} agp_region; - -typedef struct _agp_allocate { - int key; /* tag of allocation */ - __kernel_size_t pg_count;/* number of pages */ - __u32 type; /* 0 == normal, other devspec */ - __u32 physical; /* device specific (some devices - * need a phys address of the - * actual page behind the gatt - * table) */ -} agp_allocate; - -typedef struct _agp_bind { - int key; /* tag of allocation */ - __kernel_off_t pg_start;/* starting page to populate */ -} agp_bind; - -typedef struct _agp_unbind { - int key; /* tag of allocation */ - __u32 priority; /* priority for paging out */ -} agp_unbind; - -#else /* __KERNEL__ */ #include <linux/mutex.h> #include <linux/agp_backend.h> +#include <uapi/linux/agpgart.h> #define AGPGART_MINOR 175 @@ -209,6 +127,4 @@ struct agp_front_data { bool backend_acquired; }; -#endif /* __KERNEL__ */ - #endif /* _AGP_H */ diff --git a/include/linux/alarmtimer.h b/include/linux/alarmtimer.h index 96c5c249b08..9069694e70e 100644 --- a/include/linux/alarmtimer.h +++ b/include/linux/alarmtimer.h @@ -21,7 +21,6 @@ enum alarmtimer_restart { #define ALARMTIMER_STATE_INACTIVE 0x00 #define ALARMTIMER_STATE_ENQUEUED 0x01 -#define ALARMTIMER_STATE_CALLBACK 0x02 /** * struct alarm - Alarm timer structure @@ -35,6 +34,7 @@ enum alarmtimer_restart { */ struct alarm { struct timerqueue_node node; + struct hrtimer timer; enum alarmtimer_restart (*function)(struct alarm *, ktime_t now); enum alarmtimer_type type; int state; @@ -43,39 +43,12 @@ struct alarm { void alarm_init(struct alarm *alarm, enum alarmtimer_type type, enum alarmtimer_restart (*function)(struct alarm *, ktime_t)); -void alarm_start(struct alarm *alarm, ktime_t start); +int alarm_start(struct alarm *alarm, ktime_t start); int alarm_try_to_cancel(struct alarm *alarm); int alarm_cancel(struct alarm *alarm); u64 alarm_forward(struct alarm *alarm, ktime_t now, ktime_t interval); -/* - * A alarmtimer is active, when it is enqueued into timerqueue or the - * callback function is running. - */ -static inline int alarmtimer_active(const struct alarm *timer) -{ - return timer->state != ALARMTIMER_STATE_INACTIVE; -} - -/* - * Helper function to check, whether the timer is on one of the queues - */ -static inline int alarmtimer_is_queued(struct alarm *timer) -{ - return timer->state & ALARMTIMER_STATE_ENQUEUED; -} - -/* - * Helper function to check, whether the timer is running the callback - * function - */ -static inline int alarmtimer_callback_running(struct alarm *timer) -{ - return timer->state & ALARMTIMER_STATE_CALLBACK; -} - - /* Provide way to access the rtc device being used by alarmtimers */ struct rtc_device *alarmtimer_get_rtcdev(void); diff --git a/include/linux/apm_bios.h b/include/linux/apm_bios.h index 01a6244c9bc..9c3a87184f4 100644 --- a/include/linux/apm_bios.h +++ b/include/linux/apm_bios.h @@ -1,6 +1,3 @@ -#ifndef _LINUX_APM_H -#define _LINUX_APM_H - /* * Include file for the interface to an APM BIOS * Copyright 1994-2001 Stephen Rothwell (sfr@canb.auug.org.au) @@ -15,25 +12,11 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. */ +#ifndef _LINUX_APM_H +#define _LINUX_APM_H -#include <linux/types.h> - -typedef unsigned short apm_event_t; -typedef unsigned short apm_eventinfo_t; - -struct apm_bios_info { - __u16 version; - __u16 cseg; - __u32 offset; - __u16 cseg_16; - __u16 dseg; - __u16 flags; - __u16 cseg_len; - __u16 cseg_16_len; - __u16 dseg_len; -}; +#include <uapi/linux/apm_bios.h> -#ifdef __KERNEL__ #define APM_CS (GDT_ENTRY_APMBIOS_BASE * 8) #define APM_CS_16 (APM_CS + 8) @@ -110,111 +93,9 @@ struct apm_info { */ extern struct apm_info apm_info; -#endif /* __KERNEL__ */ - -/* - * Power states - */ -#define APM_STATE_READY 0x0000 -#define APM_STATE_STANDBY 0x0001 -#define APM_STATE_SUSPEND 0x0002 -#define APM_STATE_OFF 0x0003 -#define APM_STATE_BUSY 0x0004 -#define APM_STATE_REJECT 0x0005 -#define APM_STATE_OEM_SYS 0x0020 -#define APM_STATE_OEM_DEV 0x0040 - -#define APM_STATE_DISABLE 0x0000 -#define APM_STATE_ENABLE 0x0001 - -#define APM_STATE_DISENGAGE 0x0000 -#define APM_STATE_ENGAGE 0x0001 - -/* - * Events (results of Get PM Event) - */ -#define APM_SYS_STANDBY 0x0001 -#define APM_SYS_SUSPEND 0x0002 -#define APM_NORMAL_RESUME 0x0003 -#define APM_CRITICAL_RESUME 0x0004 -#define APM_LOW_BATTERY 0x0005 -#define APM_POWER_STATUS_CHANGE 0x0006 -#define APM_UPDATE_TIME 0x0007 -#define APM_CRITICAL_SUSPEND 0x0008 -#define APM_USER_STANDBY 0x0009 -#define APM_USER_SUSPEND 0x000a -#define APM_STANDBY_RESUME 0x000b -#define APM_CAPABILITY_CHANGE 0x000c - -/* - * Error codes - */ -#define APM_SUCCESS 0x00 -#define APM_DISABLED 0x01 -#define APM_CONNECTED 0x02 -#define APM_NOT_CONNECTED 0x03 -#define APM_16_CONNECTED 0x05 -#define APM_16_UNSUPPORTED 0x06 -#define APM_32_CONNECTED 0x07 -#define APM_32_UNSUPPORTED 0x08 -#define APM_BAD_DEVICE 0x09 -#define APM_BAD_PARAM 0x0a -#define APM_NOT_ENGAGED 0x0b -#define APM_BAD_FUNCTION 0x0c -#define APM_RESUME_DISABLED 0x0d -#define APM_NO_ERROR 0x53 -#define APM_BAD_STATE 0x60 -#define APM_NO_EVENTS 0x80 -#define APM_NOT_PRESENT 0x86 - -/* - * APM Device IDs - */ -#define APM_DEVICE_BIOS 0x0000 -#define APM_DEVICE_ALL 0x0001 -#define APM_DEVICE_DISPLAY 0x0100 -#define APM_DEVICE_STORAGE 0x0200 -#define APM_DEVICE_PARALLEL 0x0300 -#define APM_DEVICE_SERIAL 0x0400 -#define APM_DEVICE_NETWORK 0x0500 -#define APM_DEVICE_PCMCIA 0x0600 -#define APM_DEVICE_BATTERY 0x8000 -#define APM_DEVICE_OEM 0xe000 -#define APM_DEVICE_OLD_ALL 0xffff -#define APM_DEVICE_CLASS 0x00ff -#define APM_DEVICE_MASK 0xff00 - -#ifdef __KERNEL__ /* * This is the "All Devices" ID communicated to the BIOS */ #define APM_DEVICE_BALL ((apm_info.connection_version > 0x0100) ? \ APM_DEVICE_ALL : APM_DEVICE_OLD_ALL) -#endif - -/* - * Battery status - */ -#define APM_MAX_BATTERIES 2 - -/* - * APM defined capability bit flags - */ -#define APM_CAP_GLOBAL_STANDBY 0x0001 -#define APM_CAP_GLOBAL_SUSPEND 0x0002 -#define APM_CAP_RESUME_STANDBY_TIMER 0x0004 /* Timer resume from standby */ -#define APM_CAP_RESUME_SUSPEND_TIMER 0x0008 /* Timer resume from suspend */ -#define APM_CAP_RESUME_STANDBY_RING 0x0010 /* Resume on Ring fr standby */ -#define APM_CAP_RESUME_SUSPEND_RING 0x0020 /* Resume on Ring fr suspend */ -#define APM_CAP_RESUME_STANDBY_PCMCIA 0x0040 /* Resume on PCMCIA Ring */ -#define APM_CAP_RESUME_SUSPEND_PCMCIA 0x0080 /* Resume on PCMCIA Ring */ - -/* - * ioctl operations - */ -#include <linux/ioctl.h> - -#define APM_IOC_STANDBY _IO('A', 1) -#define APM_IOC_SUSPEND _IO('A', 2) - #endif /* LINUX_APM_H */ diff --git a/include/linux/asn1.h b/include/linux/asn1.h new file mode 100644 index 00000000000..5c3f4e4b9a2 --- /dev/null +++ b/include/linux/asn1.h @@ -0,0 +1,67 @@ +/* ASN.1 BER/DER/CER encoding definitions + * + * Copyright (C) 2012 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _LINUX_ASN1_H +#define _LINUX_ASN1_H + +/* Class */ +enum asn1_class { + ASN1_UNIV = 0, /* Universal */ + ASN1_APPL = 1, /* Application */ + ASN1_CONT = 2, /* Context */ + ASN1_PRIV = 3 /* Private */ +}; +#define ASN1_CLASS_BITS 0xc0 + + +enum asn1_method { + ASN1_PRIM = 0, /* Primitive */ + ASN1_CONS = 1 /* Constructed */ +}; +#define ASN1_CONS_BIT 0x20 + +/* Tag */ +enum asn1_tag { + ASN1_EOC = 0, /* End Of Contents or N/A */ + ASN1_BOOL = 1, /* Boolean */ + ASN1_INT = 2, /* Integer */ + ASN1_BTS = 3, /* Bit String */ + ASN1_OTS = 4, /* Octet String */ + ASN1_NULL = 5, /* Null */ + ASN1_OID = 6, /* Object Identifier */ + ASN1_ODE = 7, /* Object Description */ + ASN1_EXT = 8, /* External */ + ASN1_REAL = 9, /* Real float */ + ASN1_ENUM = 10, /* Enumerated */ + ASN1_EPDV = 11, /* Embedded PDV */ + ASN1_UTF8STR = 12, /* UTF8 String */ + ASN1_RELOID = 13, /* Relative OID */ + /* 14 - Reserved */ + /* 15 - Reserved */ + ASN1_SEQ = 16, /* Sequence and Sequence of */ + ASN1_SET = 17, /* Set and Set of */ + ASN1_NUMSTR = 18, /* Numerical String */ + ASN1_PRNSTR = 19, /* Printable String */ + ASN1_TEXSTR = 20, /* T61 String / Teletext String */ + ASN1_VIDSTR = 21, /* Videotex String */ + ASN1_IA5STR = 22, /* IA5 String */ + ASN1_UNITIM = 23, /* Universal Time */ + ASN1_GENTIM = 24, /* General Time */ + ASN1_GRASTR = 25, /* Graphic String */ + ASN1_VISSTR = 26, /* Visible String */ + ASN1_GENSTR = 27, /* General String */ + ASN1_UNISTR = 28, /* Universal String */ + ASN1_CHRSTR = 29, /* Character String */ + ASN1_BMPSTR = 30, /* BMP String */ + ASN1_LONG_TAG = 31 /* Long form tag */ +}; + +#endif /* _LINUX_ASN1_H */ diff --git a/include/linux/asn1_ber_bytecode.h b/include/linux/asn1_ber_bytecode.h new file mode 100644 index 00000000000..945d44ae529 --- /dev/null +++ b/include/linux/asn1_ber_bytecode.h @@ -0,0 +1,87 @@ +/* ASN.1 BER/DER/CER parsing state machine internal definitions + * + * Copyright (C) 2012 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _LINUX_ASN1_BER_BYTECODE_H +#define _LINUX_ASN1_BER_BYTECODE_H + +#ifdef __KERNEL__ +#include <linux/types.h> +#endif +#include <linux/asn1.h> + +typedef int (*asn1_action_t)(void *context, + size_t hdrlen, /* In case of ANY type */ + unsigned char tag, /* In case of ANY type */ + const void *value, size_t vlen); + +struct asn1_decoder { + const unsigned char *machine; + size_t machlen; + const asn1_action_t *actions; +}; + +enum asn1_opcode { + /* The tag-matching ops come first and the odd-numbered slots + * are for OR_SKIP ops. + */ +#define ASN1_OP_MATCH__SKIP 0x01 +#define ASN1_OP_MATCH__ACT 0x02 +#define ASN1_OP_MATCH__JUMP 0x04 +#define ASN1_OP_MATCH__ANY 0x08 +#define ASN1_OP_MATCH__COND 0x10 + + ASN1_OP_MATCH = 0x00, + ASN1_OP_MATCH_OR_SKIP = 0x01, + ASN1_OP_MATCH_ACT = 0x02, + ASN1_OP_MATCH_ACT_OR_SKIP = 0x03, + ASN1_OP_MATCH_JUMP = 0x04, + ASN1_OP_MATCH_JUMP_OR_SKIP = 0x05, + ASN1_OP_MATCH_ANY = 0x08, + ASN1_OP_MATCH_ANY_ACT = 0x0a, + /* Everything before here matches unconditionally */ + + ASN1_OP_COND_MATCH_OR_SKIP = 0x11, + ASN1_OP_COND_MATCH_ACT_OR_SKIP = 0x13, + ASN1_OP_COND_MATCH_JUMP_OR_SKIP = 0x15, + ASN1_OP_COND_MATCH_ANY = 0x18, + ASN1_OP_COND_MATCH_ANY_ACT = 0x1a, + + /* Everything before here will want a tag from the data */ +#define ASN1_OP__MATCHES_TAG ASN1_OP_COND_MATCH_ANY_ACT + + /* These are here to help fill up space */ + ASN1_OP_COND_FAIL = 0x1b, + ASN1_OP_COMPLETE = 0x1c, + ASN1_OP_ACT = 0x1d, + ASN1_OP_RETURN = 0x1e, + + /* The following eight have bit 0 -> SET, 1 -> OF, 2 -> ACT */ + ASN1_OP_END_SEQ = 0x20, + ASN1_OP_END_SET = 0x21, + ASN1_OP_END_SEQ_OF = 0x22, + ASN1_OP_END_SET_OF = 0x23, + ASN1_OP_END_SEQ_ACT = 0x24, + ASN1_OP_END_SET_ACT = 0x25, + ASN1_OP_END_SEQ_OF_ACT = 0x26, + ASN1_OP_END_SET_OF_ACT = 0x27, +#define ASN1_OP_END__SET 0x01 +#define ASN1_OP_END__OF 0x02 +#define ASN1_OP_END__ACT 0x04 + + ASN1_OP__NR +}; + +#define _tag(CLASS, CP, TAG) ((ASN1_##CLASS << 6) | (ASN1_##CP << 5) | ASN1_##TAG) +#define _tagn(CLASS, CP, TAG) ((ASN1_##CLASS << 6) | (ASN1_##CP << 5) | TAG) +#define _jump_target(N) (N) +#define _action(N) (N) + +#endif /* _LINUX_ASN1_BER_BYTECODE_H */ diff --git a/include/linux/asn1_decoder.h b/include/linux/asn1_decoder.h new file mode 100644 index 00000000000..fa2ff5bc048 --- /dev/null +++ b/include/linux/asn1_decoder.h @@ -0,0 +1,24 @@ +/* ASN.1 decoder + * + * Copyright (C) 2012 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _LINUX_ASN1_DECODER_H +#define _LINUX_ASN1_DECODER_H + +#include <linux/asn1.h> + +struct asn1_decoder; + +extern int asn1_ber_decoder(const struct asn1_decoder *decoder, + void *context, + const unsigned char *data, + size_t datalen); + +#endif /* _LINUX_ASN1_DECODER_H */ diff --git a/include/linux/atalk.h b/include/linux/atalk.h index f57c36881c4..73fd8b7e953 100644 --- a/include/linux/atalk.h +++ b/include/linux/atalk.h @@ -1,49 +1,9 @@ #ifndef __LINUX_ATALK_H__ #define __LINUX_ATALK_H__ -#include <linux/types.h> -#include <asm/byteorder.h> -#include <linux/socket.h> - -/* - * AppleTalk networking structures - * - * The following are directly referenced from the University Of Michigan - * netatalk for compatibility reasons. - */ -#define ATPORT_FIRST 1 -#define ATPORT_RESERVED 128 -#define ATPORT_LAST 254 /* 254 is only legal on localtalk */ -#define ATADDR_ANYNET (__u16)0 -#define ATADDR_ANYNODE (__u8)0 -#define ATADDR_ANYPORT (__u8)0 -#define ATADDR_BCAST (__u8)255 -#define DDP_MAXSZ 587 -#define DDP_MAXHOPS 15 /* 4 bits of hop counter */ - -#define SIOCATALKDIFADDR (SIOCPROTOPRIVATE + 0) - -struct atalk_addr { - __be16 s_net; - __u8 s_node; -}; - -struct sockaddr_at { - __kernel_sa_family_t sat_family; - __u8 sat_port; - struct atalk_addr sat_addr; - char sat_zero[8]; -}; - -struct atalk_netrange { - __u8 nr_phase; - __be16 nr_firstnet; - __be16 nr_lastnet; -}; - -#ifdef __KERNEL__ #include <net/sock.h> +#include <uapi/linux/atalk.h> struct atalk_route { struct net_device *dev; @@ -205,5 +165,4 @@ extern void atalk_proc_exit(void); #define atalk_proc_exit() do { } while(0) #endif /* CONFIG_PROC_FS */ -#endif /* __KERNEL__ */ #endif /* __LINUX_ATALK_H__ */ diff --git a/include/linux/atm.h b/include/linux/atm.h index d3b292174ae..30006c43595 100644 --- a/include/linux/atm.h +++ b/include/linux/atm.h @@ -1,242 +1,9 @@ /* atm.h - general ATM declarations */ - -/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */ - - -/* - * WARNING: User-space programs should not #include <linux/atm.h> directly. - * Instead, #include <atm.h> - */ - #ifndef _LINUX_ATM_H #define _LINUX_ATM_H -/* - * BEGIN_xx and END_xx markers are used for automatic generation of - * documentation. Do not change them. - */ - -#include <linux/compiler.h> -#include <linux/atmapi.h> -#include <linux/atmsap.h> -#include <linux/atmioc.h> -#include <linux/types.h> - - -/* general ATM constants */ -#define ATM_CELL_SIZE 53 /* ATM cell size incl. header */ -#define ATM_CELL_PAYLOAD 48 /* ATM payload size */ -#define ATM_AAL0_SDU 52 /* AAL0 SDU size */ -#define ATM_MAX_AAL34_PDU 65535 /* maximum AAL3/4 PDU payload */ -#define ATM_AAL5_TRAILER 8 /* AAL5 trailer size */ -#define ATM_MAX_AAL5_PDU 65535 /* maximum AAL5 PDU payload */ -#define ATM_MAX_CDV 9999 /* maximum (default) CDV */ -#define ATM_NOT_RSV_VCI 32 /* first non-reserved VCI value */ - -#define ATM_MAX_VPI 255 /* maximum VPI at the UNI */ -#define ATM_MAX_VPI_NNI 4096 /* maximum VPI at the NNI */ -#define ATM_MAX_VCI 65535 /* maximum VCI */ - - -/* "protcol" values for the socket system call */ -#define ATM_NO_AAL 0 /* AAL not specified */ -#define ATM_AAL0 13 /* "raw" ATM cells */ -#define ATM_AAL1 1 /* AAL1 (CBR) */ -#define ATM_AAL2 2 /* AAL2 (VBR) */ -#define ATM_AAL34 3 /* AAL3/4 (data) */ -#define ATM_AAL5 5 /* AAL5 (data) */ - -/* - * socket option name coding functions - * - * Note that __SO_ENCODE and __SO_LEVEL are somewhat a hack since the - * << 22 only reserves 9 bits for the level. On some architectures - * SOL_SOCKET is 0xFFFF, so that's a bit of a problem - */ - -#define __SO_ENCODE(l,n,t) ((((l) & 0x1FF) << 22) | ((n) << 16) | \ - sizeof(t)) -#define __SO_LEVEL_MATCH(c,m) (((c) >> 22) == ((m) & 0x1FF)) -#define __SO_NUMBER(c) (((c) >> 16) & 0x3f) -#define __SO_SIZE(c) ((c) & 0x3fff) - -/* - * ATM layer - */ - -#define SO_SETCLP __SO_ENCODE(SOL_ATM,0,int) - /* set CLP bit value - TODO */ -#define SO_CIRANGE __SO_ENCODE(SOL_ATM,1,struct atm_cirange) - /* connection identifier range; socket must be - bound or connected */ -#define SO_ATMQOS __SO_ENCODE(SOL_ATM,2,struct atm_qos) - /* Quality of Service setting */ -#define SO_ATMSAP __SO_ENCODE(SOL_ATM,3,struct atm_sap) - /* Service Access Point */ -#define SO_ATMPVC __SO_ENCODE(SOL_ATM,4,struct sockaddr_atmpvc) - /* "PVC" address (also for SVCs); get only */ -#define SO_MULTIPOINT __SO_ENCODE(SOL_ATM, 5, int) - /* make this vc a p2mp */ - - -/* - * Note @@@: since the socket layers don't really distinguish the control and - * the data plane but generally seems to be data plane-centric, any layer is - * about equally wrong for the SAP. If you have a better idea about this, - * please speak up ... - */ - - -/* ATM cell header (for AAL0) */ - -/* BEGIN_CH */ -#define ATM_HDR_GFC_MASK 0xf0000000 -#define ATM_HDR_GFC_SHIFT 28 -#define ATM_HDR_VPI_MASK 0x0ff00000 -#define ATM_HDR_VPI_SHIFT 20 -#define ATM_HDR_VCI_MASK 0x000ffff0 -#define ATM_HDR_VCI_SHIFT 4 -#define ATM_HDR_PTI_MASK 0x0000000e -#define ATM_HDR_PTI_SHIFT 1 -#define ATM_HDR_CLP 0x00000001 -/* END_CH */ - - -/* PTI codings */ - -/* BEGIN_PTI */ -#define ATM_PTI_US0 0 /* user data cell, congestion not exp, SDU-type 0 */ -#define ATM_PTI_US1 1 /* user data cell, congestion not exp, SDU-type 1 */ -#define ATM_PTI_UCES0 2 /* user data cell, cong. experienced, SDU-type 0 */ -#define ATM_PTI_UCES1 3 /* user data cell, cong. experienced, SDU-type 1 */ -#define ATM_PTI_SEGF5 4 /* segment OAM F5 flow related cell */ -#define ATM_PTI_E2EF5 5 /* end-to-end OAM F5 flow related cell */ -#define ATM_PTI_RSV_RM 6 /* reserved for traffic control/resource mgmt */ -#define ATM_PTI_RSV 7 /* reserved */ -/* END_PTI */ - - -/* - * The following items should stay in linux/atm.h, which should be linked to - * netatm/atm.h - */ - -/* Traffic description */ - -#define ATM_NONE 0 /* no traffic */ -#define ATM_UBR 1 -#define ATM_CBR 2 -#define ATM_VBR 3 -#define ATM_ABR 4 -#define ATM_ANYCLASS 5 /* compatible with everything */ - -#define ATM_MAX_PCR -1 /* maximum available PCR */ - -struct atm_trafprm { - unsigned char traffic_class; /* traffic class (ATM_UBR, ...) */ - int max_pcr; /* maximum PCR in cells per second */ - int pcr; /* desired PCR in cells per second */ - int min_pcr; /* minimum PCR in cells per second */ - int max_cdv; /* maximum CDV in microseconds */ - int max_sdu; /* maximum SDU in bytes */ - /* extra params for ABR */ - unsigned int icr; /* Initial Cell Rate (24-bit) */ - unsigned int tbe; /* Transient Buffer Exposure (24-bit) */ - unsigned int frtt : 24; /* Fixed Round Trip Time (24-bit) */ - unsigned int rif : 4; /* Rate Increment Factor (4-bit) */ - unsigned int rdf : 4; /* Rate Decrease Factor (4-bit) */ - unsigned int nrm_pres :1; /* nrm present bit */ - unsigned int trm_pres :1; /* rm present bit */ - unsigned int adtf_pres :1; /* adtf present bit */ - unsigned int cdf_pres :1; /* cdf present bit*/ - unsigned int nrm :3; /* Max # of Cells for each forward RM cell (3-bit) */ - unsigned int trm :3; /* Time between forward RM cells (3-bit) */ - unsigned int adtf :10; /* ACR Decrease Time Factor (10-bit) */ - unsigned int cdf :3; /* Cutoff Decrease Factor (3-bit) */ - unsigned int spare :9; /* spare bits */ -}; - -struct atm_qos { - struct atm_trafprm txtp; /* parameters in TX direction */ - struct atm_trafprm rxtp __ATM_API_ALIGN; - /* parameters in RX direction */ - unsigned char aal __ATM_API_ALIGN; -}; - -/* PVC addressing */ - -#define ATM_ITF_ANY -1 /* "magic" PVC address values */ -#define ATM_VPI_ANY -1 -#define ATM_VCI_ANY -1 -#define ATM_VPI_UNSPEC -2 -#define ATM_VCI_UNSPEC -2 - - -struct sockaddr_atmpvc { - unsigned short sap_family; /* address family, AF_ATMPVC */ - struct { /* PVC address */ - short itf; /* ATM interface */ - short vpi; /* VPI (only 8 bits at UNI) */ - int vci; /* VCI (only 16 bits at UNI) */ - } sap_addr __ATM_API_ALIGN; /* PVC address */ -}; - -/* SVC addressing */ - -#define ATM_ESA_LEN 20 /* ATM End System Address length */ -#define ATM_E164_LEN 12 /* maximum E.164 number length */ - -#define ATM_AFI_DCC 0x39 /* DCC ATM Format */ -#define ATM_AFI_ICD 0x47 /* ICD ATM Format */ -#define ATM_AFI_E164 0x45 /* E.164 ATM Format */ -#define ATM_AFI_LOCAL 0x49 /* Local ATM Format */ - -#define ATM_AFI_DCC_GROUP 0xBD /* DCC ATM Group Format */ -#define ATM_AFI_ICD_GROUP 0xC5 /* ICD ATM Group Format */ -#define ATM_AFI_E164_GROUP 0xC3 /* E.164 ATM Group Format */ -#define ATM_AFI_LOCAL_GROUP 0xC7 /* Local ATM Group Format */ +#include <uapi/linux/atm.h> -#define ATM_LIJ_NONE 0 /* no leaf-initiated join */ -#define ATM_LIJ 1 /* request joining */ -#define ATM_LIJ_RPJ 2 /* set to root-prompted join */ -#define ATM_LIJ_NJ 3 /* set to network join */ - - -struct sockaddr_atmsvc { - unsigned short sas_family; /* address family, AF_ATMSVC */ - struct { /* SVC address */ - unsigned char prv[ATM_ESA_LEN];/* private ATM address */ - char pub[ATM_E164_LEN+1]; /* public address (E.164) */ - /* unused addresses must be bzero'ed */ - char lij_type; /* role in LIJ call; one of ATM_LIJ* */ - __u32 lij_id; /* LIJ call identifier */ - } sas_addr __ATM_API_ALIGN; /* SVC address */ -}; - - -static __inline__ int atmsvc_addr_in_use(struct sockaddr_atmsvc addr) -{ - return *addr.sas_addr.prv || *addr.sas_addr.pub; -} - - -static __inline__ int atmpvc_addr_in_use(struct sockaddr_atmpvc addr) -{ - return addr.sap_addr.itf || addr.sap_addr.vpi || addr.sap_addr.vci; -} - - -/* - * Some stuff for linux/sockios.h - */ - -struct atmif_sioc { - int number; - int length; - void __user *arg; -}; - -#ifdef __KERNEL__ #ifdef CONFIG_COMPAT #include <linux/compat.h> struct compat_atmif_sioc { @@ -246,6 +13,3 @@ struct compat_atmif_sioc { }; #endif #endif - -typedef unsigned short atm_backend_t; -#endif diff --git a/include/linux/atm_tcp.h b/include/linux/atm_tcp.h index 375638f8554..db6b65fc0ae 100644 --- a/include/linux/atm_tcp.h +++ b/include/linux/atm_tcp.h @@ -3,61 +3,11 @@ /* Written 1997-2000 by Werner Almesberger, EPFL LRC/ICA */ - #ifndef LINUX_ATM_TCP_H #define LINUX_ATM_TCP_H -#include <linux/atmapi.h> -#include <linux/atm.h> -#include <linux/atmioc.h> -#include <linux/types.h> - - -/* - * All values in struct atmtcp_hdr are in network byte order - */ - -struct atmtcp_hdr { - __u16 vpi; - __u16 vci; - __u32 length; /* ... of data part */ -}; - -/* - * All values in struct atmtcp_command are in host byte order - */ - -#define ATMTCP_HDR_MAGIC (~0) /* this length indicates a command */ -#define ATMTCP_CTRL_OPEN 1 /* request/reply */ -#define ATMTCP_CTRL_CLOSE 2 /* request/reply */ +#include <uapi/linux/atm_tcp.h> -struct atmtcp_control { - struct atmtcp_hdr hdr; /* must be first */ - int type; /* message type; both directions */ - atm_kptr_t vcc; /* both directions */ - struct sockaddr_atmpvc addr; /* suggested value from kernel */ - struct atm_qos qos; /* both directions */ - int result; /* to kernel only */ -} __ATM_API_ALIGN; - -/* - * Field usage: - * Messge type dir. hdr.v?i type addr qos vcc result - * ----------- ---- ------- ---- ---- --- --- ------ - * OPEN K->D Y Y Y Y Y 0 - * OPEN D->K - Y Y Y Y Y - * CLOSE K->D - - Y - Y 0 - * CLOSE D->K - - - - Y Y - */ - -#define SIOCSIFATMTCP _IO('a',ATMIOC_ITF) /* set ATMTCP mode */ -#define ATMTCP_CREATE _IO('a',ATMIOC_ITF+14) /* create persistent ATMTCP - interface */ -#define ATMTCP_REMOVE _IO('a',ATMIOC_ITF+15) /* destroy persistent ATMTCP - interface */ - - -#ifdef __KERNEL__ struct atm_tcp_ops { int (*attach)(struct atm_vcc *vcc,int itf); @@ -69,5 +19,3 @@ struct atm_tcp_ops { extern struct atm_tcp_ops atm_tcp_ops; #endif - -#endif diff --git a/include/linux/atmdev.h b/include/linux/atmdev.h index 06fd4bbc58f..22ef21c33d0 100644 --- a/include/linux/atmdev.h +++ b/include/linux/atmdev.h @@ -1,218 +1,8 @@ /* atmdev.h - ATM device driver declarations and various related items */ - -/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */ - - #ifndef LINUX_ATMDEV_H #define LINUX_ATMDEV_H -#include <linux/atmapi.h> -#include <linux/atm.h> -#include <linux/atmioc.h> - - -#define ESI_LEN 6 - -#define ATM_OC3_PCR (155520000/270*260/8/53) - /* OC3 link rate: 155520000 bps - SONET overhead: /270*260 (9 section, 1 path) - bits per cell: /8/53 - max cell rate: 353207.547 cells/sec */ -#define ATM_25_PCR ((25600000/8-8000)/54) - /* 25 Mbps ATM cell rate (59111) */ -#define ATM_OC12_PCR (622080000/1080*1040/8/53) - /* OC12 link rate: 622080000 bps - SONET overhead: /1080*1040 - bits per cell: /8/53 - max cell rate: 1412830.188 cells/sec */ -#define ATM_DS3_PCR (8000*12) - /* DS3: 12 cells in a 125 usec time slot */ - - -#define __AAL_STAT_ITEMS \ - __HANDLE_ITEM(tx); /* TX okay */ \ - __HANDLE_ITEM(tx_err); /* TX errors */ \ - __HANDLE_ITEM(rx); /* RX okay */ \ - __HANDLE_ITEM(rx_err); /* RX errors */ \ - __HANDLE_ITEM(rx_drop); /* RX out of memory */ - -struct atm_aal_stats { -#define __HANDLE_ITEM(i) int i - __AAL_STAT_ITEMS -#undef __HANDLE_ITEM -}; - - -struct atm_dev_stats { - struct atm_aal_stats aal0; - struct atm_aal_stats aal34; - struct atm_aal_stats aal5; -} __ATM_API_ALIGN; - - -#define ATM_GETLINKRATE _IOW('a',ATMIOC_ITF+1,struct atmif_sioc) - /* get link rate */ -#define ATM_GETNAMES _IOW('a',ATMIOC_ITF+3,struct atm_iobuf) - /* get interface names (numbers) */ -#define ATM_GETTYPE _IOW('a',ATMIOC_ITF+4,struct atmif_sioc) - /* get interface type name */ -#define ATM_GETESI _IOW('a',ATMIOC_ITF+5,struct atmif_sioc) - /* get interface ESI */ -#define ATM_GETADDR _IOW('a',ATMIOC_ITF+6,struct atmif_sioc) - /* get itf's local ATM addr. list */ -#define ATM_RSTADDR _IOW('a',ATMIOC_ITF+7,struct atmif_sioc) - /* reset itf's ATM address list */ -#define ATM_ADDADDR _IOW('a',ATMIOC_ITF+8,struct atmif_sioc) - /* add a local ATM address */ -#define ATM_DELADDR _IOW('a',ATMIOC_ITF+9,struct atmif_sioc) - /* remove a local ATM address */ -#define ATM_GETCIRANGE _IOW('a',ATMIOC_ITF+10,struct atmif_sioc) - /* get connection identifier range */ -#define ATM_SETCIRANGE _IOW('a',ATMIOC_ITF+11,struct atmif_sioc) - /* set connection identifier range */ -#define ATM_SETESI _IOW('a',ATMIOC_ITF+12,struct atmif_sioc) - /* set interface ESI */ -#define ATM_SETESIF _IOW('a',ATMIOC_ITF+13,struct atmif_sioc) - /* force interface ESI */ -#define ATM_ADDLECSADDR _IOW('a', ATMIOC_ITF+14, struct atmif_sioc) - /* register a LECS address */ -#define ATM_DELLECSADDR _IOW('a', ATMIOC_ITF+15, struct atmif_sioc) - /* unregister a LECS address */ -#define ATM_GETLECSADDR _IOW('a', ATMIOC_ITF+16, struct atmif_sioc) - /* retrieve LECS address(es) */ - -#define ATM_GETSTAT _IOW('a',ATMIOC_SARCOM+0,struct atmif_sioc) - /* get AAL layer statistics */ -#define ATM_GETSTATZ _IOW('a',ATMIOC_SARCOM+1,struct atmif_sioc) - /* get AAL layer statistics and zero */ -#define ATM_GETLOOP _IOW('a',ATMIOC_SARCOM+2,struct atmif_sioc) - /* get loopback mode */ -#define ATM_SETLOOP _IOW('a',ATMIOC_SARCOM+3,struct atmif_sioc) - /* set loopback mode */ -#define ATM_QUERYLOOP _IOW('a',ATMIOC_SARCOM+4,struct atmif_sioc) - /* query supported loopback modes */ -#define ATM_SETSC _IOW('a',ATMIOC_SPECIAL+1,int) - /* enable or disable single-copy */ -#define ATM_SETBACKEND _IOW('a',ATMIOC_SPECIAL+2,atm_backend_t) - /* set backend handler */ -#define ATM_NEWBACKENDIF _IOW('a',ATMIOC_SPECIAL+3,atm_backend_t) - /* use backend to make new if */ -#define ATM_ADDPARTY _IOW('a', ATMIOC_SPECIAL+4,struct atm_iobuf) - /* add party to p2mp call */ -#ifdef CONFIG_COMPAT -/* It actually takes struct sockaddr_atmsvc, not struct atm_iobuf */ -#define COMPAT_ATM_ADDPARTY _IOW('a', ATMIOC_SPECIAL+4,struct compat_atm_iobuf) -#endif -#define ATM_DROPPARTY _IOW('a', ATMIOC_SPECIAL+5,int) - /* drop party from p2mp call */ - -/* - * These are backend handkers that can be set via the ATM_SETBACKEND call - * above. In the future we may support dynamic loading of these - for now, - * they're just being used to share the ATMIOC_BACKEND ioctls - */ -#define ATM_BACKEND_RAW 0 -#define ATM_BACKEND_PPP 1 /* PPPoATM - RFC2364 */ -#define ATM_BACKEND_BR2684 2 /* Bridged RFC1483/2684 */ - -/* for ATM_GETTYPE */ -#define ATM_ITFTYP_LEN 8 /* maximum length of interface type name */ - -/* - * Loopback modes for ATM_{PHY,SAR}_{GET,SET}LOOP - */ - -/* Point of loopback CPU-->SAR-->PHY-->line--> ... */ -#define __ATM_LM_NONE 0 /* no loop back ^ ^ ^ ^ */ -#define __ATM_LM_AAL 1 /* loop back PDUs --' | | | */ -#define __ATM_LM_ATM 2 /* loop back ATM cells ---' | | */ -/* RESERVED 4 loop back on PHY side ---' */ -#define __ATM_LM_PHY 8 /* loop back bits (digital) ----' | */ -#define __ATM_LM_ANALOG 16 /* loop back the analog signal --------' */ - -/* Direction of loopback */ -#define __ATM_LM_MKLOC(n) ((n)) /* Local (i.e. loop TX to RX) */ -#define __ATM_LM_MKRMT(n) ((n) << 8) /* Remote (i.e. loop RX to TX) */ - -#define __ATM_LM_XTLOC(n) ((n) & 0xff) -#define __ATM_LM_XTRMT(n) (((n) >> 8) & 0xff) - -#define ATM_LM_NONE 0 /* no loopback */ - -#define ATM_LM_LOC_AAL __ATM_LM_MKLOC(__ATM_LM_AAL) -#define ATM_LM_LOC_ATM __ATM_LM_MKLOC(__ATM_LM_ATM) -#define ATM_LM_LOC_PHY __ATM_LM_MKLOC(__ATM_LM_PHY) -#define ATM_LM_LOC_ANALOG __ATM_LM_MKLOC(__ATM_LM_ANALOG) - -#define ATM_LM_RMT_AAL __ATM_LM_MKRMT(__ATM_LM_AAL) -#define ATM_LM_RMT_ATM __ATM_LM_MKRMT(__ATM_LM_ATM) -#define ATM_LM_RMT_PHY __ATM_LM_MKRMT(__ATM_LM_PHY) -#define ATM_LM_RMT_ANALOG __ATM_LM_MKRMT(__ATM_LM_ANALOG) - -/* - * Note: ATM_LM_LOC_* and ATM_LM_RMT_* can be combined, provided that - * __ATM_LM_XTLOC(x) <= __ATM_LM_XTRMT(x) - */ - - -struct atm_iobuf { - int length; - void __user *buffer; -}; - -/* for ATM_GETCIRANGE / ATM_SETCIRANGE */ - -#define ATM_CI_MAX -1 /* use maximum range of VPI/VCI */ - -struct atm_cirange { - signed char vpi_bits; /* 1..8, ATM_CI_MAX (-1) for maximum */ - signed char vci_bits; /* 1..16, ATM_CI_MAX (-1) for maximum */ -}; - -/* for ATM_SETSC; actually taken from the ATM_VF number space */ - -#define ATM_SC_RX 1024 /* enable RX single-copy */ -#define ATM_SC_TX 2048 /* enable TX single-copy */ - -#define ATM_BACKLOG_DEFAULT 32 /* if we get more, we're likely to time out - anyway */ - -/* MF: change_qos (Modify) flags */ - -#define ATM_MF_IMMED 1 /* Block until change is effective */ -#define ATM_MF_INC_RSV 2 /* Change reservation on increase */ -#define ATM_MF_INC_SHP 4 /* Change shaping on increase */ -#define ATM_MF_DEC_RSV 8 /* Change reservation on decrease */ -#define ATM_MF_DEC_SHP 16 /* Change shaping on decrease */ -#define ATM_MF_BWD 32 /* Set the backward direction parameters */ - -#define ATM_MF_SET (ATM_MF_INC_RSV | ATM_MF_INC_SHP | ATM_MF_DEC_RSV | \ - ATM_MF_DEC_SHP | ATM_MF_BWD) - -/* - * ATM_VS_* are used to express VC state in a human-friendly way. - */ - -#define ATM_VS_IDLE 0 /* VC is not used */ -#define ATM_VS_CONNECTED 1 /* VC is connected */ -#define ATM_VS_CLOSING 2 /* VC is closing */ -#define ATM_VS_LISTEN 3 /* VC is listening for incoming setups */ -#define ATM_VS_INUSE 4 /* VC is in use (registered with atmsigd) */ -#define ATM_VS_BOUND 5 /* VC is bound */ - -#define ATM_VS2TXT_MAP \ - "IDLE", "CONNECTED", "CLOSING", "LISTEN", "INUSE", "BOUND" - -#define ATM_VF2TXT_MAP \ - "ADDR", "READY", "PARTIAL", "REGIS", \ - "RELEASED", "HASQOS", "LISTEN", "META", \ - "256", "512", "1024", "2048", \ - "SESSION", "HASSAP", "BOUND", "CLOSE" - - -#ifdef __KERNEL__ - #include <linux/wait.h> /* wait_queue_head_t */ #include <linux/time.h> /* struct timeval */ #include <linux/net.h> @@ -221,6 +11,7 @@ struct atm_cirange { #include <linux/uio.h> #include <net/sock.h> #include <linux/atomic.h> +#include <uapi/linux/atmdev.h> #ifdef CONFIG_PROC_FS #include <linux/proc_fs.h> @@ -521,6 +312,4 @@ void deregister_atm_ioctl(struct atm_ioctl *); int register_atmdevice_notifier(struct notifier_block *nb); void unregister_atmdevice_notifier(struct notifier_block *nb); -#endif /* __KERNEL__ */ - #endif diff --git a/include/linux/audit.h b/include/linux/audit.h index 2c83e5f7edb..bce729afbcf 100644 --- a/include/linux/audit.h +++ b/include/linux/audit.h @@ -20,388 +20,11 @@ * Written by Rickard E. (Rik) Faith <faith@redhat.com> * */ - #ifndef _LINUX_AUDIT_H_ #define _LINUX_AUDIT_H_ -#include <linux/types.h> -#include <linux/elf-em.h> -#include <linux/ptrace.h> - -/* The netlink messages for the audit system is divided into blocks: - * 1000 - 1099 are for commanding the audit system - * 1100 - 1199 user space trusted application messages - * 1200 - 1299 messages internal to the audit daemon - * 1300 - 1399 audit event messages - * 1400 - 1499 SE Linux use - * 1500 - 1599 kernel LSPP events - * 1600 - 1699 kernel crypto events - * 1700 - 1799 kernel anomaly records - * 1800 - 1899 kernel integrity events - * 1900 - 1999 future kernel use - * 2000 is for otherwise unclassified kernel audit messages (legacy) - * 2001 - 2099 unused (kernel) - * 2100 - 2199 user space anomaly records - * 2200 - 2299 user space actions taken in response to anomalies - * 2300 - 2399 user space generated LSPP events - * 2400 - 2499 user space crypto events - * 2500 - 2999 future user space (maybe integrity labels and related events) - * - * Messages from 1000-1199 are bi-directional. 1200-1299 & 2100 - 2999 are - * exclusively user space. 1300-2099 is kernel --> user space - * communication. - */ -#define AUDIT_GET 1000 /* Get status */ -#define AUDIT_SET 1001 /* Set status (enable/disable/auditd) */ -#define AUDIT_LIST 1002 /* List syscall rules -- deprecated */ -#define AUDIT_ADD 1003 /* Add syscall rule -- deprecated */ -#define AUDIT_DEL 1004 /* Delete syscall rule -- deprecated */ -#define AUDIT_USER 1005 /* Message from userspace -- deprecated */ -#define AUDIT_LOGIN 1006 /* Define the login id and information */ -#define AUDIT_WATCH_INS 1007 /* Insert file/dir watch entry */ -#define AUDIT_WATCH_REM 1008 /* Remove file/dir watch entry */ -#define AUDIT_WATCH_LIST 1009 /* List all file/dir watches */ -#define AUDIT_SIGNAL_INFO 1010 /* Get info about sender of signal to auditd */ -#define AUDIT_ADD_RULE 1011 /* Add syscall filtering rule */ -#define AUDIT_DEL_RULE 1012 /* Delete syscall filtering rule */ -#define AUDIT_LIST_RULES 1013 /* List syscall filtering rules */ -#define AUDIT_TRIM 1014 /* Trim junk from watched tree */ -#define AUDIT_MAKE_EQUIV 1015 /* Append to watched tree */ -#define AUDIT_TTY_GET 1016 /* Get TTY auditing status */ -#define AUDIT_TTY_SET 1017 /* Set TTY auditing status */ - -#define AUDIT_FIRST_USER_MSG 1100 /* Userspace messages mostly uninteresting to kernel */ -#define AUDIT_USER_AVC 1107 /* We filter this differently */ -#define AUDIT_USER_TTY 1124 /* Non-ICANON TTY input meaning */ -#define AUDIT_LAST_USER_MSG 1199 -#define AUDIT_FIRST_USER_MSG2 2100 /* More user space messages */ -#define AUDIT_LAST_USER_MSG2 2999 - -#define AUDIT_DAEMON_START 1200 /* Daemon startup record */ -#define AUDIT_DAEMON_END 1201 /* Daemon normal stop record */ -#define AUDIT_DAEMON_ABORT 1202 /* Daemon error stop record */ -#define AUDIT_DAEMON_CONFIG 1203 /* Daemon config change */ - -#define AUDIT_SYSCALL 1300 /* Syscall event */ -/* #define AUDIT_FS_WATCH 1301 * Deprecated */ -#define AUDIT_PATH 1302 /* Filename path information */ -#define AUDIT_IPC 1303 /* IPC record */ -#define AUDIT_SOCKETCALL 1304 /* sys_socketcall arguments */ -#define AUDIT_CONFIG_CHANGE 1305 /* Audit system configuration change */ -#define AUDIT_SOCKADDR 1306 /* sockaddr copied as syscall arg */ -#define AUDIT_CWD 1307 /* Current working directory */ -#define AUDIT_EXECVE 1309 /* execve arguments */ -#define AUDIT_IPC_SET_PERM 1311 /* IPC new permissions record type */ -#define AUDIT_MQ_OPEN 1312 /* POSIX MQ open record type */ -#define AUDIT_MQ_SENDRECV 1313 /* POSIX MQ send/receive record type */ -#define AUDIT_MQ_NOTIFY 1314 /* POSIX MQ notify record type */ -#define AUDIT_MQ_GETSETATTR 1315 /* POSIX MQ get/set attribute record type */ -#define AUDIT_KERNEL_OTHER 1316 /* For use by 3rd party modules */ -#define AUDIT_FD_PAIR 1317 /* audit record for pipe/socketpair */ -#define AUDIT_OBJ_PID 1318 /* ptrace target */ -#define AUDIT_TTY 1319 /* Input on an administrative TTY */ -#define AUDIT_EOE 1320 /* End of multi-record event */ -#define AUDIT_BPRM_FCAPS 1321 /* Information about fcaps increasing perms */ -#define AUDIT_CAPSET 1322 /* Record showing argument to sys_capset */ -#define AUDIT_MMAP 1323 /* Record showing descriptor and flags in mmap */ -#define AUDIT_NETFILTER_PKT 1324 /* Packets traversing netfilter chains */ -#define AUDIT_NETFILTER_CFG 1325 /* Netfilter chain modifications */ - -#define AUDIT_AVC 1400 /* SE Linux avc denial or grant */ -#define AUDIT_SELINUX_ERR 1401 /* Internal SE Linux Errors */ -#define AUDIT_AVC_PATH 1402 /* dentry, vfsmount pair from avc */ -#define AUDIT_MAC_POLICY_LOAD 1403 /* Policy file load */ -#define AUDIT_MAC_STATUS 1404 /* Changed enforcing,permissive,off */ -#define AUDIT_MAC_CONFIG_CHANGE 1405 /* Changes to booleans */ -#define AUDIT_MAC_UNLBL_ALLOW 1406 /* NetLabel: allow unlabeled traffic */ -#define AUDIT_MAC_CIPSOV4_ADD 1407 /* NetLabel: add CIPSOv4 DOI entry */ -#define AUDIT_MAC_CIPSOV4_DEL 1408 /* NetLabel: del CIPSOv4 DOI entry */ -#define AUDIT_MAC_MAP_ADD 1409 /* NetLabel: add LSM domain mapping */ -#define AUDIT_MAC_MAP_DEL 1410 /* NetLabel: del LSM domain mapping */ -#define AUDIT_MAC_IPSEC_ADDSA 1411 /* Not used */ -#define AUDIT_MAC_IPSEC_DELSA 1412 /* Not used */ -#define AUDIT_MAC_IPSEC_ADDSPD 1413 /* Not used */ -#define AUDIT_MAC_IPSEC_DELSPD 1414 /* Not used */ -#define AUDIT_MAC_IPSEC_EVENT 1415 /* Audit an IPSec event */ -#define AUDIT_MAC_UNLBL_STCADD 1416 /* NetLabel: add a static label */ -#define AUDIT_MAC_UNLBL_STCDEL 1417 /* NetLabel: del a static label */ - -#define AUDIT_FIRST_KERN_ANOM_MSG 1700 -#define AUDIT_LAST_KERN_ANOM_MSG 1799 -#define AUDIT_ANOM_PROMISCUOUS 1700 /* Device changed promiscuous mode */ -#define AUDIT_ANOM_ABEND 1701 /* Process ended abnormally */ -#define AUDIT_ANOM_LINK 1702 /* Suspicious use of file links */ -#define AUDIT_INTEGRITY_DATA 1800 /* Data integrity verification */ -#define AUDIT_INTEGRITY_METADATA 1801 /* Metadata integrity verification */ -#define AUDIT_INTEGRITY_STATUS 1802 /* Integrity enable status */ -#define AUDIT_INTEGRITY_HASH 1803 /* Integrity HASH type */ -#define AUDIT_INTEGRITY_PCR 1804 /* PCR invalidation msgs */ -#define AUDIT_INTEGRITY_RULE 1805 /* policy rule */ - -#define AUDIT_KERNEL 2000 /* Asynchronous audit record. NOT A REQUEST. */ - -/* Rule flags */ -#define AUDIT_FILTER_USER 0x00 /* Apply rule to user-generated messages */ -#define AUDIT_FILTER_TASK 0x01 /* Apply rule at task creation (not syscall) */ -#define AUDIT_FILTER_ENTRY 0x02 /* Apply rule at syscall entry */ -#define AUDIT_FILTER_WATCH 0x03 /* Apply rule to file system watches */ -#define AUDIT_FILTER_EXIT 0x04 /* Apply rule at syscall exit */ -#define AUDIT_FILTER_TYPE 0x05 /* Apply rule at audit_log_start */ - -#define AUDIT_NR_FILTERS 6 - -#define AUDIT_FILTER_PREPEND 0x10 /* Prepend to front of list */ - -/* Rule actions */ -#define AUDIT_NEVER 0 /* Do not build context if rule matches */ -#define AUDIT_POSSIBLE 1 /* Build context if rule matches */ -#define AUDIT_ALWAYS 2 /* Generate audit record if rule matches */ - -/* Rule structure sizes -- if these change, different AUDIT_ADD and - * AUDIT_LIST commands must be implemented. */ -#define AUDIT_MAX_FIELDS 64 -#define AUDIT_MAX_KEY_LEN 256 -#define AUDIT_BITMASK_SIZE 64 -#define AUDIT_WORD(nr) ((__u32)((nr)/32)) -#define AUDIT_BIT(nr) (1 << ((nr) - AUDIT_WORD(nr)*32)) - -#define AUDIT_SYSCALL_CLASSES 16 -#define AUDIT_CLASS_DIR_WRITE 0 -#define AUDIT_CLASS_DIR_WRITE_32 1 -#define AUDIT_CLASS_CHATTR 2 -#define AUDIT_CLASS_CHATTR_32 3 -#define AUDIT_CLASS_READ 4 -#define AUDIT_CLASS_READ_32 5 -#define AUDIT_CLASS_WRITE 6 -#define AUDIT_CLASS_WRITE_32 7 -#define AUDIT_CLASS_SIGNAL 8 -#define AUDIT_CLASS_SIGNAL_32 9 - -/* This bitmask is used to validate user input. It represents all bits that - * are currently used in an audit field constant understood by the kernel. - * If you are adding a new #define AUDIT_<whatever>, please ensure that - * AUDIT_UNUSED_BITS is updated if need be. */ -#define AUDIT_UNUSED_BITS 0x07FFFC00 - -/* AUDIT_FIELD_COMPARE rule list */ -#define AUDIT_COMPARE_UID_TO_OBJ_UID 1 -#define AUDIT_COMPARE_GID_TO_OBJ_GID 2 -#define AUDIT_COMPARE_EUID_TO_OBJ_UID 3 -#define AUDIT_COMPARE_EGID_TO_OBJ_GID 4 -#define AUDIT_COMPARE_AUID_TO_OBJ_UID 5 -#define AUDIT_COMPARE_SUID_TO_OBJ_UID 6 -#define AUDIT_COMPARE_SGID_TO_OBJ_GID 7 -#define AUDIT_COMPARE_FSUID_TO_OBJ_UID 8 -#define AUDIT_COMPARE_FSGID_TO_OBJ_GID 9 - -#define AUDIT_COMPARE_UID_TO_AUID 10 -#define AUDIT_COMPARE_UID_TO_EUID 11 -#define AUDIT_COMPARE_UID_TO_FSUID 12 -#define AUDIT_COMPARE_UID_TO_SUID 13 - -#define AUDIT_COMPARE_AUID_TO_FSUID 14 -#define AUDIT_COMPARE_AUID_TO_SUID 15 -#define AUDIT_COMPARE_AUID_TO_EUID 16 - -#define AUDIT_COMPARE_EUID_TO_SUID 17 -#define AUDIT_COMPARE_EUID_TO_FSUID 18 - -#define AUDIT_COMPARE_SUID_TO_FSUID 19 - -#define AUDIT_COMPARE_GID_TO_EGID 20 -#define AUDIT_COMPARE_GID_TO_FSGID 21 -#define AUDIT_COMPARE_GID_TO_SGID 22 - -#define AUDIT_COMPARE_EGID_TO_FSGID 23 -#define AUDIT_COMPARE_EGID_TO_SGID 24 -#define AUDIT_COMPARE_SGID_TO_FSGID 25 - -#define AUDIT_MAX_FIELD_COMPARE AUDIT_COMPARE_SGID_TO_FSGID - -/* Rule fields */ - /* These are useful when checking the - * task structure at task creation time - * (AUDIT_PER_TASK). */ -#define AUDIT_PID 0 -#define AUDIT_UID 1 -#define AUDIT_EUID 2 -#define AUDIT_SUID 3 -#define AUDIT_FSUID 4 -#define AUDIT_GID 5 -#define AUDIT_EGID 6 -#define AUDIT_SGID 7 -#define AUDIT_FSGID 8 -#define AUDIT_LOGINUID 9 -#define AUDIT_PERS 10 -#define AUDIT_ARCH 11 -#define AUDIT_MSGTYPE 12 -#define AUDIT_SUBJ_USER 13 /* security label user */ -#define AUDIT_SUBJ_ROLE 14 /* security label role */ -#define AUDIT_SUBJ_TYPE 15 /* security label type */ -#define AUDIT_SUBJ_SEN 16 /* security label sensitivity label */ -#define AUDIT_SUBJ_CLR 17 /* security label clearance label */ -#define AUDIT_PPID 18 -#define AUDIT_OBJ_USER 19 -#define AUDIT_OBJ_ROLE 20 -#define AUDIT_OBJ_TYPE 21 -#define AUDIT_OBJ_LEV_LOW 22 -#define AUDIT_OBJ_LEV_HIGH 23 - - /* These are ONLY useful when checking - * at syscall exit time (AUDIT_AT_EXIT). */ -#define AUDIT_DEVMAJOR 100 -#define AUDIT_DEVMINOR 101 -#define AUDIT_INODE 102 -#define AUDIT_EXIT 103 -#define AUDIT_SUCCESS 104 /* exit >= 0; value ignored */ -#define AUDIT_WATCH 105 -#define AUDIT_PERM 106 -#define AUDIT_DIR 107 -#define AUDIT_FILETYPE 108 -#define AUDIT_OBJ_UID 109 -#define AUDIT_OBJ_GID 110 -#define AUDIT_FIELD_COMPARE 111 - -#define AUDIT_ARG0 200 -#define AUDIT_ARG1 (AUDIT_ARG0+1) -#define AUDIT_ARG2 (AUDIT_ARG0+2) -#define AUDIT_ARG3 (AUDIT_ARG0+3) - -#define AUDIT_FILTERKEY 210 - -#define AUDIT_NEGATE 0x80000000 - -/* These are the supported operators. - * 4 2 1 8 - * = > < ? - * ---------- - * 0 0 0 0 00 nonsense - * 0 0 0 1 08 & bit mask - * 0 0 1 0 10 < - * 0 1 0 0 20 > - * 0 1 1 0 30 != - * 1 0 0 0 40 = - * 1 0 0 1 48 &= bit test - * 1 0 1 0 50 <= - * 1 1 0 0 60 >= - * 1 1 1 1 78 all operators - */ -#define AUDIT_BIT_MASK 0x08000000 -#define AUDIT_LESS_THAN 0x10000000 -#define AUDIT_GREATER_THAN 0x20000000 -#define AUDIT_NOT_EQUAL 0x30000000 -#define AUDIT_EQUAL 0x40000000 -#define AUDIT_BIT_TEST (AUDIT_BIT_MASK|AUDIT_EQUAL) -#define AUDIT_LESS_THAN_OR_EQUAL (AUDIT_LESS_THAN|AUDIT_EQUAL) -#define AUDIT_GREATER_THAN_OR_EQUAL (AUDIT_GREATER_THAN|AUDIT_EQUAL) -#define AUDIT_OPERATORS (AUDIT_EQUAL|AUDIT_NOT_EQUAL|AUDIT_BIT_MASK) - -enum { - Audit_equal, - Audit_not_equal, - Audit_bitmask, - Audit_bittest, - Audit_lt, - Audit_gt, - Audit_le, - Audit_ge, - Audit_bad -}; - -/* Status symbols */ - /* Mask values */ -#define AUDIT_STATUS_ENABLED 0x0001 -#define AUDIT_STATUS_FAILURE 0x0002 -#define AUDIT_STATUS_PID 0x0004 -#define AUDIT_STATUS_RATE_LIMIT 0x0008 -#define AUDIT_STATUS_BACKLOG_LIMIT 0x0010 - /* Failure-to-log actions */ -#define AUDIT_FAIL_SILENT 0 -#define AUDIT_FAIL_PRINTK 1 -#define AUDIT_FAIL_PANIC 2 - -/* distinguish syscall tables */ -#define __AUDIT_ARCH_64BIT 0x80000000 -#define __AUDIT_ARCH_LE 0x40000000 -#define AUDIT_ARCH_ALPHA (EM_ALPHA|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE) -#define AUDIT_ARCH_ARM (EM_ARM|__AUDIT_ARCH_LE) -#define AUDIT_ARCH_ARMEB (EM_ARM) -#define AUDIT_ARCH_CRIS (EM_CRIS|__AUDIT_ARCH_LE) -#define AUDIT_ARCH_FRV (EM_FRV) -#define AUDIT_ARCH_H8300 (EM_H8_300) -#define AUDIT_ARCH_I386 (EM_386|__AUDIT_ARCH_LE) -#define AUDIT_ARCH_IA64 (EM_IA_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE) -#define AUDIT_ARCH_M32R (EM_M32R) -#define AUDIT_ARCH_M68K (EM_68K) -#define AUDIT_ARCH_MIPS (EM_MIPS) -#define AUDIT_ARCH_MIPSEL (EM_MIPS|__AUDIT_ARCH_LE) -#define AUDIT_ARCH_MIPS64 (EM_MIPS|__AUDIT_ARCH_64BIT) -#define AUDIT_ARCH_MIPSEL64 (EM_MIPS|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE) -#define AUDIT_ARCH_PARISC (EM_PARISC) -#define AUDIT_ARCH_PARISC64 (EM_PARISC|__AUDIT_ARCH_64BIT) -#define AUDIT_ARCH_PPC (EM_PPC) -#define AUDIT_ARCH_PPC64 (EM_PPC64|__AUDIT_ARCH_64BIT) -#define AUDIT_ARCH_S390 (EM_S390) -#define AUDIT_ARCH_S390X (EM_S390|__AUDIT_ARCH_64BIT) -#define AUDIT_ARCH_SH (EM_SH) -#define AUDIT_ARCH_SHEL (EM_SH|__AUDIT_ARCH_LE) -#define AUDIT_ARCH_SH64 (EM_SH|__AUDIT_ARCH_64BIT) -#define AUDIT_ARCH_SHEL64 (EM_SH|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE) -#define AUDIT_ARCH_SPARC (EM_SPARC) -#define AUDIT_ARCH_SPARC64 (EM_SPARCV9|__AUDIT_ARCH_64BIT) -#define AUDIT_ARCH_X86_64 (EM_X86_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE) - -#define AUDIT_PERM_EXEC 1 -#define AUDIT_PERM_WRITE 2 -#define AUDIT_PERM_READ 4 -#define AUDIT_PERM_ATTR 8 - -struct audit_status { - __u32 mask; /* Bit mask for valid entries */ - __u32 enabled; /* 1 = enabled, 0 = disabled */ - __u32 failure; /* Failure-to-log action */ - __u32 pid; /* pid of auditd process */ - __u32 rate_limit; /* messages rate limit (per second) */ - __u32 backlog_limit; /* waiting messages limit */ - __u32 lost; /* messages lost */ - __u32 backlog; /* messages waiting in queue */ -}; - -struct audit_tty_status { - __u32 enabled; /* 1 = enabled, 0 = disabled */ -}; - -/* audit_rule_data supports filter rules with both integer and string - * fields. It corresponds with AUDIT_ADD_RULE, AUDIT_DEL_RULE and - * AUDIT_LIST_RULES requests. - */ -struct audit_rule_data { - __u32 flags; /* AUDIT_PER_{TASK,CALL}, AUDIT_PREPEND */ - __u32 action; /* AUDIT_NEVER, AUDIT_POSSIBLE, AUDIT_ALWAYS */ - __u32 field_count; - __u32 mask[AUDIT_BITMASK_SIZE]; /* syscall(s) affected */ - __u32 fields[AUDIT_MAX_FIELDS]; - __u32 values[AUDIT_MAX_FIELDS]; - __u32 fieldflags[AUDIT_MAX_FIELDS]; - __u32 buflen; /* total length of string fields */ - char buf[0]; /* string fields buffer */ -}; - -/* audit_rule is supported to maintain backward compatibility with - * userspace. It supports integer fields only and corresponds to - * AUDIT_ADD, AUDIT_DEL and AUDIT_LIST requests. - */ -struct audit_rule { /* for AUDIT_LIST, AUDIT_ADD, and AUDIT_DEL */ - __u32 flags; /* AUDIT_PER_{TASK,CALL}, AUDIT_PREPEND */ - __u32 action; /* AUDIT_NEVER, AUDIT_POSSIBLE, AUDIT_ALWAYS */ - __u32 field_count; - __u32 mask[AUDIT_BITMASK_SIZE]; - __u32 fields[AUDIT_MAX_FIELDS]; - __u32 values[AUDIT_MAX_FIELDS]; -}; - -#ifdef __KERNEL__ #include <linux/sched.h> +#include <uapi/linux/audit.h> struct audit_sig_info { uid_t uid; @@ -452,6 +75,16 @@ struct audit_field { extern int __init audit_register_class(int class, unsigned *list); extern int audit_classify_syscall(int abi, unsigned syscall); extern int audit_classify_arch(int arch); + +/* audit_names->type values */ +#define AUDIT_TYPE_UNKNOWN 0 /* we don't know yet */ +#define AUDIT_TYPE_NORMAL 1 /* a "normal" audit record */ +#define AUDIT_TYPE_PARENT 2 /* a parent audit record */ +#define AUDIT_TYPE_CHILD_DELETE 3 /* a child being deleted */ +#define AUDIT_TYPE_CHILD_CREATE 4 /* a child being created */ + +struct filename; + #ifdef CONFIG_AUDITSYSCALL /* These are defined in auditsc.c */ /* Public API */ @@ -461,11 +94,14 @@ extern void __audit_syscall_entry(int arch, int major, unsigned long a0, unsigned long a1, unsigned long a2, unsigned long a3); extern void __audit_syscall_exit(int ret_success, long ret_value); -extern void __audit_getname(const char *name); -extern void audit_putname(const char *name); -extern void __audit_inode(const char *name, const struct dentry *dentry); -extern void __audit_inode_child(const struct dentry *dentry, - const struct inode *parent); +extern struct filename *__audit_reusename(const __user char *uptr); +extern void __audit_getname(struct filename *name); +extern void audit_putname(struct filename *name); +extern void __audit_inode(struct filename *name, const struct dentry *dentry, + unsigned int parent); +extern void __audit_inode_child(const struct inode *parent, + const struct dentry *dentry, + const unsigned char type); extern void __audit_seccomp(unsigned long syscall, long signr, int code); extern void __audit_ptrace(struct task_struct *t); @@ -495,19 +131,27 @@ static inline void audit_syscall_exit(void *pt_regs) __audit_syscall_exit(success, return_code); } } -static inline void audit_getname(const char *name) +static inline struct filename *audit_reusename(const __user char *name) +{ + if (unlikely(!audit_dummy_context())) + return __audit_reusename(name); + return NULL; +} +static inline void audit_getname(struct filename *name) { if (unlikely(!audit_dummy_context())) __audit_getname(name); } -static inline void audit_inode(const char *name, const struct dentry *dentry) { +static inline void audit_inode(struct filename *name, const struct dentry *dentry, + unsigned int parent) { if (unlikely(!audit_dummy_context())) - __audit_inode(name, dentry); + __audit_inode(name, dentry, parent); } -static inline void audit_inode_child(const struct dentry *dentry, - const struct inode *parent) { +static inline void audit_inode_child(const struct inode *parent, + const struct dentry *dentry, + const unsigned char type) { if (unlikely(!audit_dummy_context())) - __audit_inode_child(dentry, parent); + __audit_inode_child(parent, dentry, type); } void audit_core_dumps(long signr); @@ -651,19 +295,29 @@ static inline int audit_dummy_context(void) { return 1; } -static inline void audit_getname(const char *name) +static inline struct filename *audit_reusename(const __user char *name) +{ + return NULL; +} +static inline void audit_getname(struct filename *name) { } -static inline void audit_putname(const char *name) +static inline void audit_putname(struct filename *name) { } -static inline void __audit_inode(const char *name, const struct dentry *dentry) +static inline void __audit_inode(struct filename *name, + const struct dentry *dentry, + unsigned int parent) { } -static inline void __audit_inode_child(const struct dentry *dentry, - const struct inode *parent) +static inline void __audit_inode_child(const struct inode *parent, + const struct dentry *dentry, + const unsigned char type) { } -static inline void audit_inode(const char *name, const struct dentry *dentry) +static inline void audit_inode(struct filename *name, + const struct dentry *dentry, + unsigned int parent) { } -static inline void audit_inode_child(const struct dentry *dentry, - const struct inode *parent) +static inline void audit_inode_child(const struct inode *parent, + const struct dentry *dentry, + const unsigned char type) { } static inline void audit_core_dumps(long signr) { } @@ -828,4 +482,3 @@ static inline void audit_log_string(struct audit_buffer *ab, const char *buf) } #endif -#endif diff --git a/include/linux/auto_fs.h b/include/linux/auto_fs.h index da64e15004b..fcd704d354c 100644 --- a/include/linux/auto_fs.h +++ b/include/linux/auto_fs.h @@ -10,77 +10,11 @@ * * ----------------------------------------------------------------------- */ - #ifndef _LINUX_AUTO_FS_H #define _LINUX_AUTO_FS_H -#include <linux/types.h> -#ifdef __KERNEL__ #include <linux/fs.h> #include <linux/limits.h> #include <linux/ioctl.h> -#else -#include <sys/ioctl.h> -#endif /* __KERNEL__ */ - -/* This file describes autofs v3 */ -#define AUTOFS_PROTO_VERSION 3 - -/* Range of protocol versions defined */ -#define AUTOFS_MAX_PROTO_VERSION AUTOFS_PROTO_VERSION -#define AUTOFS_MIN_PROTO_VERSION AUTOFS_PROTO_VERSION - -/* - * Architectures where both 32- and 64-bit binaries can be executed - * on 64-bit kernels need this. This keeps the structure format - * uniform, and makes sure the wait_queue_token isn't too big to be - * passed back down to the kernel. - * - * This assumes that on these architectures: - * mode 32 bit 64 bit - * ------------------------- - * int 32 bit 32 bit - * long 32 bit 64 bit - * - * If so, 32-bit user-space code should be backwards compatible. - */ - -#if defined(__sparc__) || defined(__mips__) || defined(__x86_64__) \ - || defined(__powerpc__) || defined(__s390__) -typedef unsigned int autofs_wqt_t; -#else -typedef unsigned long autofs_wqt_t; -#endif - -/* Packet types */ -#define autofs_ptype_missing 0 /* Missing entry (mount request) */ -#define autofs_ptype_expire 1 /* Expire entry (umount request) */ - -struct autofs_packet_hdr { - int proto_version; /* Protocol version */ - int type; /* Type of packet */ -}; - -struct autofs_packet_missing { - struct autofs_packet_hdr hdr; - autofs_wqt_t wait_queue_token; - int len; - char name[NAME_MAX+1]; -}; - -/* v3 expire (via ioctl) */ -struct autofs_packet_expire { - struct autofs_packet_hdr hdr; - int len; - char name[NAME_MAX+1]; -}; - -#define AUTOFS_IOC_READY _IO(0x93,0x60) -#define AUTOFS_IOC_FAIL _IO(0x93,0x61) -#define AUTOFS_IOC_CATATONIC _IO(0x93,0x62) -#define AUTOFS_IOC_PROTOVER _IOR(0x93,0x63,int) -#define AUTOFS_IOC_SETTIMEOUT32 _IOWR(0x93,0x64,compat_ulong_t) -#define AUTOFS_IOC_SETTIMEOUT _IOWR(0x93,0x64,unsigned long) -#define AUTOFS_IOC_EXPIRE _IOR(0x93,0x65,struct autofs_packet_expire) - +#include <uapi/linux/auto_fs.h> #endif /* _LINUX_AUTO_FS_H */ diff --git a/include/linux/auxvec.h b/include/linux/auxvec.h index f3b5d4e3a2a..669fef5c745 100644 --- a/include/linux/auxvec.h +++ b/include/linux/auxvec.h @@ -1,39 +1,8 @@ #ifndef _LINUX_AUXVEC_H #define _LINUX_AUXVEC_H -#include <asm/auxvec.h> +#include <uapi/linux/auxvec.h> -/* Symbolic values for the entries in the auxiliary table - put on the initial stack */ -#define AT_NULL 0 /* end of vector */ -#define AT_IGNORE 1 /* entry should be ignored */ -#define AT_EXECFD 2 /* file descriptor of program */ -#define AT_PHDR 3 /* program headers for program */ -#define AT_PHENT 4 /* size of program header entry */ -#define AT_PHNUM 5 /* number of program headers */ -#define AT_PAGESZ 6 /* system page size */ -#define AT_BASE 7 /* base address of interpreter */ -#define AT_FLAGS 8 /* flags */ -#define AT_ENTRY 9 /* entry point of program */ -#define AT_NOTELF 10 /* program is not ELF */ -#define AT_UID 11 /* real uid */ -#define AT_EUID 12 /* effective uid */ -#define AT_GID 13 /* real gid */ -#define AT_EGID 14 /* effective gid */ -#define AT_PLATFORM 15 /* string identifying CPU for optimizations */ -#define AT_HWCAP 16 /* arch dependent hints at CPU capabilities */ -#define AT_CLKTCK 17 /* frequency at which times() increments */ -/* AT_* values 18 through 22 are reserved */ -#define AT_SECURE 23 /* secure mode boolean */ -#define AT_BASE_PLATFORM 24 /* string identifying real platform, may - * differ from AT_PLATFORM. */ -#define AT_RANDOM 25 /* address of 16 random bytes */ - -#define AT_EXECFN 31 /* filename of program */ - -#ifdef __KERNEL__ #define AT_VECTOR_SIZE_BASE 19 /* NEW_AUX_ENT entries in auxiliary table */ /* number of "#define AT_.*" above, minus {AT_NULL, AT_IGNORE, AT_NOTELF} */ -#endif - #endif /* _LINUX_AUXVEC_H */ diff --git a/include/linux/binfmts.h b/include/linux/binfmts.h index 26531f32bbb..cfcc6bfcaec 100644 --- a/include/linux/binfmts.h +++ b/include/linux/binfmts.h @@ -1,26 +1,10 @@ #ifndef _LINUX_BINFMTS_H #define _LINUX_BINFMTS_H -#include <linux/capability.h> - -struct pt_regs; - -/* - * These are the maximum length and maximum number of strings passed to the - * execve() system call. MAX_ARG_STRLEN is essentially random but serves to - * prevent the kernel from being unduly impacted by misaddressed pointers. - * MAX_ARG_STRINGS is chosen to fit in a signed 32-bit integer. - */ -#define MAX_ARG_STRLEN (PAGE_SIZE * 32) -#define MAX_ARG_STRINGS 0x7FFFFFFF - -/* sizeof(linux_binprm->buf) */ -#define BINPRM_BUF_SIZE 128 - -#ifdef __KERNEL__ #include <linux/sched.h> #include <linux/unistd.h> #include <asm/exec.h> +#include <uapi/linux/binfmts.h> #define CORENAME_MAX_SIZE 128 @@ -141,5 +125,4 @@ extern void free_bprm(struct linux_binprm *); extern void ret_from_kernel_execve(struct pt_regs *normal) __noreturn; #endif -#endif /* __KERNEL__ */ #endif /* _LINUX_BINFMTS_H */ diff --git a/include/linux/blktrace_api.h b/include/linux/blktrace_api.h index 4d1a0748eaf..7c2e030e72f 100644 --- a/include/linux/blktrace_api.h +++ b/include/linux/blktrace_api.h @@ -1,150 +1,11 @@ #ifndef BLKTRACE_H #define BLKTRACE_H -#include <linux/types.h> -#ifdef __KERNEL__ #include <linux/blkdev.h> #include <linux/relay.h> #include <linux/compat.h> -#endif - -/* - * Trace categories - */ -enum blktrace_cat { - BLK_TC_READ = 1 << 0, /* reads */ - BLK_TC_WRITE = 1 << 1, /* writes */ - BLK_TC_FLUSH = 1 << 2, /* flush */ - BLK_TC_SYNC = 1 << 3, /* sync IO */ - BLK_TC_SYNCIO = BLK_TC_SYNC, - BLK_TC_QUEUE = 1 << 4, /* queueing/merging */ - BLK_TC_REQUEUE = 1 << 5, /* requeueing */ - BLK_TC_ISSUE = 1 << 6, /* issue */ - BLK_TC_COMPLETE = 1 << 7, /* completions */ - BLK_TC_FS = 1 << 8, /* fs requests */ - BLK_TC_PC = 1 << 9, /* pc requests */ - BLK_TC_NOTIFY = 1 << 10, /* special message */ - BLK_TC_AHEAD = 1 << 11, /* readahead */ - BLK_TC_META = 1 << 12, /* metadata */ - BLK_TC_DISCARD = 1 << 13, /* discard requests */ - BLK_TC_DRV_DATA = 1 << 14, /* binary per-driver data */ - BLK_TC_FUA = 1 << 15, /* fua requests */ - - BLK_TC_END = 1 << 15, /* we've run out of bits! */ -}; - -#define BLK_TC_SHIFT (16) -#define BLK_TC_ACT(act) ((act) << BLK_TC_SHIFT) - -/* - * Basic trace actions - */ -enum blktrace_act { - __BLK_TA_QUEUE = 1, /* queued */ - __BLK_TA_BACKMERGE, /* back merged to existing rq */ - __BLK_TA_FRONTMERGE, /* front merge to existing rq */ - __BLK_TA_GETRQ, /* allocated new request */ - __BLK_TA_SLEEPRQ, /* sleeping on rq allocation */ - __BLK_TA_REQUEUE, /* request requeued */ - __BLK_TA_ISSUE, /* sent to driver */ - __BLK_TA_COMPLETE, /* completed by driver */ - __BLK_TA_PLUG, /* queue was plugged */ - __BLK_TA_UNPLUG_IO, /* queue was unplugged by io */ - __BLK_TA_UNPLUG_TIMER, /* queue was unplugged by timer */ - __BLK_TA_INSERT, /* insert request */ - __BLK_TA_SPLIT, /* bio was split */ - __BLK_TA_BOUNCE, /* bio was bounced */ - __BLK_TA_REMAP, /* bio was remapped */ - __BLK_TA_ABORT, /* request aborted */ - __BLK_TA_DRV_DATA, /* driver-specific binary data */ -}; - -/* - * Notify events. - */ -enum blktrace_notify { - __BLK_TN_PROCESS = 0, /* establish pid/name mapping */ - __BLK_TN_TIMESTAMP, /* include system clock */ - __BLK_TN_MESSAGE, /* Character string message */ -}; - - -/* - * Trace actions in full. Additionally, read or write is masked - */ -#define BLK_TA_QUEUE (__BLK_TA_QUEUE | BLK_TC_ACT(BLK_TC_QUEUE)) -#define BLK_TA_BACKMERGE (__BLK_TA_BACKMERGE | BLK_TC_ACT(BLK_TC_QUEUE)) -#define BLK_TA_FRONTMERGE (__BLK_TA_FRONTMERGE | BLK_TC_ACT(BLK_TC_QUEUE)) -#define BLK_TA_GETRQ (__BLK_TA_GETRQ | BLK_TC_ACT(BLK_TC_QUEUE)) -#define BLK_TA_SLEEPRQ (__BLK_TA_SLEEPRQ | BLK_TC_ACT(BLK_TC_QUEUE)) -#define BLK_TA_REQUEUE (__BLK_TA_REQUEUE | BLK_TC_ACT(BLK_TC_REQUEUE)) -#define BLK_TA_ISSUE (__BLK_TA_ISSUE | BLK_TC_ACT(BLK_TC_ISSUE)) -#define BLK_TA_COMPLETE (__BLK_TA_COMPLETE| BLK_TC_ACT(BLK_TC_COMPLETE)) -#define BLK_TA_PLUG (__BLK_TA_PLUG | BLK_TC_ACT(BLK_TC_QUEUE)) -#define BLK_TA_UNPLUG_IO (__BLK_TA_UNPLUG_IO | BLK_TC_ACT(BLK_TC_QUEUE)) -#define BLK_TA_UNPLUG_TIMER (__BLK_TA_UNPLUG_TIMER | BLK_TC_ACT(BLK_TC_QUEUE)) -#define BLK_TA_INSERT (__BLK_TA_INSERT | BLK_TC_ACT(BLK_TC_QUEUE)) -#define BLK_TA_SPLIT (__BLK_TA_SPLIT) -#define BLK_TA_BOUNCE (__BLK_TA_BOUNCE) -#define BLK_TA_REMAP (__BLK_TA_REMAP | BLK_TC_ACT(BLK_TC_QUEUE)) -#define BLK_TA_ABORT (__BLK_TA_ABORT | BLK_TC_ACT(BLK_TC_QUEUE)) -#define BLK_TA_DRV_DATA (__BLK_TA_DRV_DATA | BLK_TC_ACT(BLK_TC_DRV_DATA)) - -#define BLK_TN_PROCESS (__BLK_TN_PROCESS | BLK_TC_ACT(BLK_TC_NOTIFY)) -#define BLK_TN_TIMESTAMP (__BLK_TN_TIMESTAMP | BLK_TC_ACT(BLK_TC_NOTIFY)) -#define BLK_TN_MESSAGE (__BLK_TN_MESSAGE | BLK_TC_ACT(BLK_TC_NOTIFY)) - -#define BLK_IO_TRACE_MAGIC 0x65617400 -#define BLK_IO_TRACE_VERSION 0x07 - -/* - * The trace itself - */ -struct blk_io_trace { - __u32 magic; /* MAGIC << 8 | version */ - __u32 sequence; /* event number */ - __u64 time; /* in microseconds */ - __u64 sector; /* disk offset */ - __u32 bytes; /* transfer length */ - __u32 action; /* what happened */ - __u32 pid; /* who did it */ - __u32 device; /* device number */ - __u32 cpu; /* on what cpu did it happen */ - __u16 error; /* completion error */ - __u16 pdu_len; /* length of data after this trace */ -}; - -/* - * The remap event - */ -struct blk_io_trace_remap { - __be32 device_from; - __be32 device_to; - __be64 sector_from; -}; - -enum { - Blktrace_setup = 1, - Blktrace_running, - Blktrace_stopped, -}; - -#define BLKTRACE_BDEV_SIZE 32 - -/* - * User setup structure passed with BLKTRACESTART - */ -struct blk_user_trace_setup { - char name[BLKTRACE_BDEV_SIZE]; /* output */ - __u16 act_mask; /* input */ - __u32 buf_size; /* input */ - __u32 buf_nr; /* input */ - __u64 start_lba; - __u64 end_lba; - __u32 pid; -}; +#include <uapi/linux/blktrace_api.h> -#ifdef __KERNEL__ #if defined(CONFIG_BLK_DEV_IO_TRACE) #include <linux/sysfs.h> @@ -250,5 +111,4 @@ extern void blk_fill_rwbs(char *rwbs, u32 rw, int bytes); #endif /* CONFIG_EVENT_TRACING && CONFIG_BLOCK */ -#endif /* __KERNEL__ */ #endif diff --git a/include/linux/bsg.h b/include/linux/bsg.h index ecb4730d086..7173f6e9d2d 100644 --- a/include/linux/bsg.h +++ b/include/linux/bsg.h @@ -1,67 +1,8 @@ #ifndef BSG_H #define BSG_H -#include <linux/types.h> +#include <uapi/linux/bsg.h> -#define BSG_PROTOCOL_SCSI 0 - -#define BSG_SUB_PROTOCOL_SCSI_CMD 0 -#define BSG_SUB_PROTOCOL_SCSI_TMF 1 -#define BSG_SUB_PROTOCOL_SCSI_TRANSPORT 2 - -/* - * For flags member below - * sg.h sg_io_hdr also has bits defined for it's flags member. However - * none of these bits are implemented/used by bsg. The bits below are - * allocated to not conflict with sg.h ones anyway. - */ -#define BSG_FLAG_Q_AT_TAIL 0x10 /* default, == 0 at this bit, is Q_AT_HEAD */ - -struct sg_io_v4 { - __s32 guard; /* [i] 'Q' to differentiate from v3 */ - __u32 protocol; /* [i] 0 -> SCSI , .... */ - __u32 subprotocol; /* [i] 0 -> SCSI command, 1 -> SCSI task - management function, .... */ - - __u32 request_len; /* [i] in bytes */ - __u64 request; /* [i], [*i] {SCSI: cdb} */ - __u64 request_tag; /* [i] {SCSI: task tag (only if flagged)} */ - __u32 request_attr; /* [i] {SCSI: task attribute} */ - __u32 request_priority; /* [i] {SCSI: task priority} */ - __u32 request_extra; /* [i] {spare, for padding} */ - __u32 max_response_len; /* [i] in bytes */ - __u64 response; /* [i], [*o] {SCSI: (auto)sense data} */ - - /* "dout_": data out (to device); "din_": data in (from device) */ - __u32 dout_iovec_count; /* [i] 0 -> "flat" dout transfer else - dout_xfer points to array of iovec */ - __u32 dout_xfer_len; /* [i] bytes to be transferred to device */ - __u32 din_iovec_count; /* [i] 0 -> "flat" din transfer */ - __u32 din_xfer_len; /* [i] bytes to be transferred from device */ - __u64 dout_xferp; /* [i], [*i] */ - __u64 din_xferp; /* [i], [*o] */ - - __u32 timeout; /* [i] units: millisecond */ - __u32 flags; /* [i] bit mask */ - __u64 usr_ptr; /* [i->o] unused internally */ - __u32 spare_in; /* [i] */ - - __u32 driver_status; /* [o] 0 -> ok */ - __u32 transport_status; /* [o] 0 -> ok */ - __u32 device_status; /* [o] {SCSI: command completion status} */ - __u32 retry_delay; /* [o] {SCSI: status auxiliary information} */ - __u32 info; /* [o] additional information */ - __u32 duration; /* [o] time to complete, in milliseconds */ - __u32 response_len; /* [o] bytes of response actually written */ - __s32 din_resid; /* [o] din_xfer_len - actual_din_xfer_len */ - __s32 dout_resid; /* [o] dout_xfer_len - actual_dout_xfer_len */ - __u64 generated_tag; /* [o] {SCSI: transport generated task tag} */ - __u32 spare_out; /* [o] */ - - __u32 padding; -}; - -#ifdef __KERNEL__ #if defined(CONFIG_BLK_DEV_BSG) struct bsg_class_device { @@ -89,6 +30,4 @@ static inline void bsg_unregister_queue(struct request_queue *q) } #endif -#endif /* __KERNEL__ */ - #endif diff --git a/include/linux/byteorder/Kbuild b/include/linux/byteorder/Kbuild index 5896e344ba6..e69de29bb2d 100644 --- a/include/linux/byteorder/Kbuild +++ b/include/linux/byteorder/Kbuild @@ -1,2 +0,0 @@ -header-y += big_endian.h -header-y += little_endian.h diff --git a/include/linux/byteorder/big_endian.h b/include/linux/byteorder/big_endian.h index 3c80fd7e8b5..392041475c7 100644 --- a/include/linux/byteorder/big_endian.h +++ b/include/linux/byteorder/big_endian.h @@ -1,108 +1,7 @@ #ifndef _LINUX_BYTEORDER_BIG_ENDIAN_H #define _LINUX_BYTEORDER_BIG_ENDIAN_H -#ifndef __BIG_ENDIAN -#define __BIG_ENDIAN 4321 -#endif -#ifndef __BIG_ENDIAN_BITFIELD -#define __BIG_ENDIAN_BITFIELD -#endif +#include <uapi/linux/byteorder/big_endian.h> -#include <linux/types.h> -#include <linux/swab.h> - -#define __constant_htonl(x) ((__force __be32)(__u32)(x)) -#define __constant_ntohl(x) ((__force __u32)(__be32)(x)) -#define __constant_htons(x) ((__force __be16)(__u16)(x)) -#define __constant_ntohs(x) ((__force __u16)(__be16)(x)) -#define __constant_cpu_to_le64(x) ((__force __le64)___constant_swab64((x))) -#define __constant_le64_to_cpu(x) ___constant_swab64((__force __u64)(__le64)(x)) -#define __constant_cpu_to_le32(x) ((__force __le32)___constant_swab32((x))) -#define __constant_le32_to_cpu(x) ___constant_swab32((__force __u32)(__le32)(x)) -#define __constant_cpu_to_le16(x) ((__force __le16)___constant_swab16((x))) -#define __constant_le16_to_cpu(x) ___constant_swab16((__force __u16)(__le16)(x)) -#define __constant_cpu_to_be64(x) ((__force __be64)(__u64)(x)) -#define __constant_be64_to_cpu(x) ((__force __u64)(__be64)(x)) -#define __constant_cpu_to_be32(x) ((__force __be32)(__u32)(x)) -#define __constant_be32_to_cpu(x) ((__force __u32)(__be32)(x)) -#define __constant_cpu_to_be16(x) ((__force __be16)(__u16)(x)) -#define __constant_be16_to_cpu(x) ((__force __u16)(__be16)(x)) -#define __cpu_to_le64(x) ((__force __le64)__swab64((x))) -#define __le64_to_cpu(x) __swab64((__force __u64)(__le64)(x)) -#define __cpu_to_le32(x) ((__force __le32)__swab32((x))) -#define __le32_to_cpu(x) __swab32((__force __u32)(__le32)(x)) -#define __cpu_to_le16(x) ((__force __le16)__swab16((x))) -#define __le16_to_cpu(x) __swab16((__force __u16)(__le16)(x)) -#define __cpu_to_be64(x) ((__force __be64)(__u64)(x)) -#define __be64_to_cpu(x) ((__force __u64)(__be64)(x)) -#define __cpu_to_be32(x) ((__force __be32)(__u32)(x)) -#define __be32_to_cpu(x) ((__force __u32)(__be32)(x)) -#define __cpu_to_be16(x) ((__force __be16)(__u16)(x)) -#define __be16_to_cpu(x) ((__force __u16)(__be16)(x)) - -static inline __le64 __cpu_to_le64p(const __u64 *p) -{ - return (__force __le64)__swab64p(p); -} -static inline __u64 __le64_to_cpup(const __le64 *p) -{ - return __swab64p((__u64 *)p); -} -static inline __le32 __cpu_to_le32p(const __u32 *p) -{ - return (__force __le32)__swab32p(p); -} -static inline __u32 __le32_to_cpup(const __le32 *p) -{ - return __swab32p((__u32 *)p); -} -static inline __le16 __cpu_to_le16p(const __u16 *p) -{ - return (__force __le16)__swab16p(p); -} -static inline __u16 __le16_to_cpup(const __le16 *p) -{ - return __swab16p((__u16 *)p); -} -static inline __be64 __cpu_to_be64p(const __u64 *p) -{ - return (__force __be64)*p; -} -static inline __u64 __be64_to_cpup(const __be64 *p) -{ - return (__force __u64)*p; -} -static inline __be32 __cpu_to_be32p(const __u32 *p) -{ - return (__force __be32)*p; -} -static inline __u32 __be32_to_cpup(const __be32 *p) -{ - return (__force __u32)*p; -} -static inline __be16 __cpu_to_be16p(const __u16 *p) -{ - return (__force __be16)*p; -} -static inline __u16 __be16_to_cpup(const __be16 *p) -{ - return (__force __u16)*p; -} -#define __cpu_to_le64s(x) __swab64s((x)) -#define __le64_to_cpus(x) __swab64s((x)) -#define __cpu_to_le32s(x) __swab32s((x)) -#define __le32_to_cpus(x) __swab32s((x)) -#define __cpu_to_le16s(x) __swab16s((x)) -#define __le16_to_cpus(x) __swab16s((x)) -#define __cpu_to_be64s(x) do { (void)(x); } while (0) -#define __be64_to_cpus(x) do { (void)(x); } while (0) -#define __cpu_to_be32s(x) do { (void)(x); } while (0) -#define __be32_to_cpus(x) do { (void)(x); } while (0) -#define __cpu_to_be16s(x) do { (void)(x); } while (0) -#define __be16_to_cpus(x) do { (void)(x); } while (0) - -#ifdef __KERNEL__ #include <linux/byteorder/generic.h> -#endif - #endif /* _LINUX_BYTEORDER_BIG_ENDIAN_H */ diff --git a/include/linux/byteorder/little_endian.h b/include/linux/byteorder/little_endian.h index 83195fb8296..08057377aa2 100644 --- a/include/linux/byteorder/little_endian.h +++ b/include/linux/byteorder/little_endian.h @@ -1,108 +1,7 @@ #ifndef _LINUX_BYTEORDER_LITTLE_ENDIAN_H #define _LINUX_BYTEORDER_LITTLE_ENDIAN_H -#ifndef __LITTLE_ENDIAN -#define __LITTLE_ENDIAN 1234 -#endif -#ifndef __LITTLE_ENDIAN_BITFIELD -#define __LITTLE_ENDIAN_BITFIELD -#endif +#include <uapi/linux/byteorder/little_endian.h> -#include <linux/types.h> -#include <linux/swab.h> - -#define __constant_htonl(x) ((__force __be32)___constant_swab32((x))) -#define __constant_ntohl(x) ___constant_swab32((__force __be32)(x)) -#define __constant_htons(x) ((__force __be16)___constant_swab16((x))) -#define __constant_ntohs(x) ___constant_swab16((__force __be16)(x)) -#define __constant_cpu_to_le64(x) ((__force __le64)(__u64)(x)) -#define __constant_le64_to_cpu(x) ((__force __u64)(__le64)(x)) -#define __constant_cpu_to_le32(x) ((__force __le32)(__u32)(x)) -#define __constant_le32_to_cpu(x) ((__force __u32)(__le32)(x)) -#define __constant_cpu_to_le16(x) ((__force __le16)(__u16)(x)) -#define __constant_le16_to_cpu(x) ((__force __u16)(__le16)(x)) -#define __constant_cpu_to_be64(x) ((__force __be64)___constant_swab64((x))) -#define __constant_be64_to_cpu(x) ___constant_swab64((__force __u64)(__be64)(x)) -#define __constant_cpu_to_be32(x) ((__force __be32)___constant_swab32((x))) -#define __constant_be32_to_cpu(x) ___constant_swab32((__force __u32)(__be32)(x)) -#define __constant_cpu_to_be16(x) ((__force __be16)___constant_swab16((x))) -#define __constant_be16_to_cpu(x) ___constant_swab16((__force __u16)(__be16)(x)) -#define __cpu_to_le64(x) ((__force __le64)(__u64)(x)) -#define __le64_to_cpu(x) ((__force __u64)(__le64)(x)) -#define __cpu_to_le32(x) ((__force __le32)(__u32)(x)) -#define __le32_to_cpu(x) ((__force __u32)(__le32)(x)) -#define __cpu_to_le16(x) ((__force __le16)(__u16)(x)) -#define __le16_to_cpu(x) ((__force __u16)(__le16)(x)) -#define __cpu_to_be64(x) ((__force __be64)__swab64((x))) -#define __be64_to_cpu(x) __swab64((__force __u64)(__be64)(x)) -#define __cpu_to_be32(x) ((__force __be32)__swab32((x))) -#define __be32_to_cpu(x) __swab32((__force __u32)(__be32)(x)) -#define __cpu_to_be16(x) ((__force __be16)__swab16((x))) -#define __be16_to_cpu(x) __swab16((__force __u16)(__be16)(x)) - -static inline __le64 __cpu_to_le64p(const __u64 *p) -{ - return (__force __le64)*p; -} -static inline __u64 __le64_to_cpup(const __le64 *p) -{ - return (__force __u64)*p; -} -static inline __le32 __cpu_to_le32p(const __u32 *p) -{ - return (__force __le32)*p; -} -static inline __u32 __le32_to_cpup(const __le32 *p) -{ - return (__force __u32)*p; -} -static inline __le16 __cpu_to_le16p(const __u16 *p) -{ - return (__force __le16)*p; -} -static inline __u16 __le16_to_cpup(const __le16 *p) -{ - return (__force __u16)*p; -} -static inline __be64 __cpu_to_be64p(const __u64 *p) -{ - return (__force __be64)__swab64p(p); -} -static inline __u64 __be64_to_cpup(const __be64 *p) -{ - return __swab64p((__u64 *)p); -} -static inline __be32 __cpu_to_be32p(const __u32 *p) -{ - return (__force __be32)__swab32p(p); -} -static inline __u32 __be32_to_cpup(const __be32 *p) -{ - return __swab32p((__u32 *)p); -} -static inline __be16 __cpu_to_be16p(const __u16 *p) -{ - return (__force __be16)__swab16p(p); -} -static inline __u16 __be16_to_cpup(const __be16 *p) -{ - return __swab16p((__u16 *)p); -} -#define __cpu_to_le64s(x) do { (void)(x); } while (0) -#define __le64_to_cpus(x) do { (void)(x); } while (0) -#define __cpu_to_le32s(x) do { (void)(x); } while (0) -#define __le32_to_cpus(x) do { (void)(x); } while (0) -#define __cpu_to_le16s(x) do { (void)(x); } while (0) -#define __le16_to_cpus(x) do { (void)(x); } while (0) -#define __cpu_to_be64s(x) __swab64s((x)) -#define __be64_to_cpus(x) __swab64s((x)) -#define __cpu_to_be32s(x) __swab32s((x)) -#define __be32_to_cpus(x) __swab32s((x)) -#define __cpu_to_be16s(x) __swab16s((x)) -#define __be16_to_cpus(x) __swab16s((x)) - -#ifdef __KERNEL__ #include <linux/byteorder/generic.h> -#endif - #endif /* _LINUX_BYTEORDER_LITTLE_ENDIAN_H */ diff --git a/include/linux/can/Kbuild b/include/linux/can/Kbuild index c62b7f1728f..e69de29bb2d 100644 --- a/include/linux/can/Kbuild +++ b/include/linux/can/Kbuild @@ -1,5 +0,0 @@ -header-y += raw.h -header-y += bcm.h -header-y += gw.h -header-y += error.h -header-y += netlink.h diff --git a/include/linux/capability.h b/include/linux/capability.h index d10b7ed595b..98503b79236 100644 --- a/include/linux/capability.h +++ b/include/linux/capability.h @@ -9,82 +9,11 @@ * * ftp://www.kernel.org/pub/linux/libs/security/linux-privs/kernel-2.6/ */ - #ifndef _LINUX_CAPABILITY_H #define _LINUX_CAPABILITY_H -#include <linux/types.h> - -struct task_struct; - -/* User-level do most of the mapping between kernel and user - capabilities based on the version tag given by the kernel. The - kernel might be somewhat backwards compatible, but don't bet on - it. */ - -/* Note, cap_t, is defined by POSIX (draft) to be an "opaque" pointer to - a set of three capability sets. The transposition of 3*the - following structure to such a composite is better handled in a user - library since the draft standard requires the use of malloc/free - etc.. */ - -#define _LINUX_CAPABILITY_VERSION_1 0x19980330 -#define _LINUX_CAPABILITY_U32S_1 1 - -#define _LINUX_CAPABILITY_VERSION_2 0x20071026 /* deprecated - use v3 */ -#define _LINUX_CAPABILITY_U32S_2 2 - -#define _LINUX_CAPABILITY_VERSION_3 0x20080522 -#define _LINUX_CAPABILITY_U32S_3 2 - -typedef struct __user_cap_header_struct { - __u32 version; - int pid; -} __user *cap_user_header_t; - -typedef struct __user_cap_data_struct { - __u32 effective; - __u32 permitted; - __u32 inheritable; -} __user *cap_user_data_t; - - -#define VFS_CAP_REVISION_MASK 0xFF000000 -#define VFS_CAP_REVISION_SHIFT 24 -#define VFS_CAP_FLAGS_MASK ~VFS_CAP_REVISION_MASK -#define VFS_CAP_FLAGS_EFFECTIVE 0x000001 - -#define VFS_CAP_REVISION_1 0x01000000 -#define VFS_CAP_U32_1 1 -#define XATTR_CAPS_SZ_1 (sizeof(__le32)*(1 + 2*VFS_CAP_U32_1)) - -#define VFS_CAP_REVISION_2 0x02000000 -#define VFS_CAP_U32_2 2 -#define XATTR_CAPS_SZ_2 (sizeof(__le32)*(1 + 2*VFS_CAP_U32_2)) +#include <uapi/linux/capability.h> -#define XATTR_CAPS_SZ XATTR_CAPS_SZ_2 -#define VFS_CAP_U32 VFS_CAP_U32_2 -#define VFS_CAP_REVISION VFS_CAP_REVISION_2 - -struct vfs_cap_data { - __le32 magic_etc; /* Little endian */ - struct { - __le32 permitted; /* Little endian */ - __le32 inheritable; /* Little endian */ - } data[VFS_CAP_U32]; -}; - -#ifndef __KERNEL__ - -/* - * Backwardly compatible definition for source code - trapped in a - * 32-bit world. If you find you need this, please consider using - * libcap to untrap yourself... - */ -#define _LINUX_CAPABILITY_VERSION _LINUX_CAPABILITY_VERSION_1 -#define _LINUX_CAPABILITY_U32S _LINUX_CAPABILITY_U32S_1 - -#else #define _KERNEL_CAPABILITY_VERSION _LINUX_CAPABILITY_VERSION_3 #define _KERNEL_CAPABILITY_U32S _LINUX_CAPABILITY_U32S_3 @@ -105,277 +34,6 @@ struct cpu_vfs_cap_data { #define _USER_CAP_HEADER_SIZE (sizeof(struct __user_cap_header_struct)) #define _KERNEL_CAP_T_SIZE (sizeof(kernel_cap_t)) -#endif - - -/** - ** POSIX-draft defined capabilities. - **/ - -/* In a system with the [_POSIX_CHOWN_RESTRICTED] option defined, this - overrides the restriction of changing file ownership and group - ownership. */ - -#define CAP_CHOWN 0 - -/* Override all DAC access, including ACL execute access if - [_POSIX_ACL] is defined. Excluding DAC access covered by - CAP_LINUX_IMMUTABLE. */ - -#define CAP_DAC_OVERRIDE 1 - -/* Overrides all DAC restrictions regarding read and search on files - and directories, including ACL restrictions if [_POSIX_ACL] is - defined. Excluding DAC access covered by CAP_LINUX_IMMUTABLE. */ - -#define CAP_DAC_READ_SEARCH 2 - -/* Overrides all restrictions about allowed operations on files, where - file owner ID must be equal to the user ID, except where CAP_FSETID - is applicable. It doesn't override MAC and DAC restrictions. */ - -#define CAP_FOWNER 3 - -/* Overrides the following restrictions that the effective user ID - shall match the file owner ID when setting the S_ISUID and S_ISGID - bits on that file; that the effective group ID (or one of the - supplementary group IDs) shall match the file owner ID when setting - the S_ISGID bit on that file; that the S_ISUID and S_ISGID bits are - cleared on successful return from chown(2) (not implemented). */ - -#define CAP_FSETID 4 - -/* Overrides the restriction that the real or effective user ID of a - process sending a signal must match the real or effective user ID - of the process receiving the signal. */ - -#define CAP_KILL 5 - -/* Allows setgid(2) manipulation */ -/* Allows setgroups(2) */ -/* Allows forged gids on socket credentials passing. */ - -#define CAP_SETGID 6 - -/* Allows set*uid(2) manipulation (including fsuid). */ -/* Allows forged pids on socket credentials passing. */ - -#define CAP_SETUID 7 - - -/** - ** Linux-specific capabilities - **/ - -/* Without VFS support for capabilities: - * Transfer any capability in your permitted set to any pid, - * remove any capability in your permitted set from any pid - * With VFS support for capabilities (neither of above, but) - * Add any capability from current's capability bounding set - * to the current process' inheritable set - * Allow taking bits out of capability bounding set - * Allow modification of the securebits for a process - */ - -#define CAP_SETPCAP 8 - -/* Allow modification of S_IMMUTABLE and S_APPEND file attributes */ - -#define CAP_LINUX_IMMUTABLE 9 - -/* Allows binding to TCP/UDP sockets below 1024 */ -/* Allows binding to ATM VCIs below 32 */ - -#define CAP_NET_BIND_SERVICE 10 - -/* Allow broadcasting, listen to multicast */ - -#define CAP_NET_BROADCAST 11 - -/* Allow interface configuration */ -/* Allow administration of IP firewall, masquerading and accounting */ -/* Allow setting debug option on sockets */ -/* Allow modification of routing tables */ -/* Allow setting arbitrary process / process group ownership on - sockets */ -/* Allow binding to any address for transparent proxying (also via NET_RAW) */ -/* Allow setting TOS (type of service) */ -/* Allow setting promiscuous mode */ -/* Allow clearing driver statistics */ -/* Allow multicasting */ -/* Allow read/write of device-specific registers */ -/* Allow activation of ATM control sockets */ - -#define CAP_NET_ADMIN 12 - -/* Allow use of RAW sockets */ -/* Allow use of PACKET sockets */ -/* Allow binding to any address for transparent proxying (also via NET_ADMIN) */ - -#define CAP_NET_RAW 13 - -/* Allow locking of shared memory segments */ -/* Allow mlock and mlockall (which doesn't really have anything to do - with IPC) */ - -#define CAP_IPC_LOCK 14 - -/* Override IPC ownership checks */ - -#define CAP_IPC_OWNER 15 - -/* Insert and remove kernel modules - modify kernel without limit */ -#define CAP_SYS_MODULE 16 - -/* Allow ioperm/iopl access */ -/* Allow sending USB messages to any device via /proc/bus/usb */ - -#define CAP_SYS_RAWIO 17 - -/* Allow use of chroot() */ - -#define CAP_SYS_CHROOT 18 - -/* Allow ptrace() of any process */ - -#define CAP_SYS_PTRACE 19 - -/* Allow configuration of process accounting */ - -#define CAP_SYS_PACCT 20 - -/* Allow configuration of the secure attention key */ -/* Allow administration of the random device */ -/* Allow examination and configuration of disk quotas */ -/* Allow setting the domainname */ -/* Allow setting the hostname */ -/* Allow calling bdflush() */ -/* Allow mount() and umount(), setting up new smb connection */ -/* Allow some autofs root ioctls */ -/* Allow nfsservctl */ -/* Allow VM86_REQUEST_IRQ */ -/* Allow to read/write pci config on alpha */ -/* Allow irix_prctl on mips (setstacksize) */ -/* Allow flushing all cache on m68k (sys_cacheflush) */ -/* Allow removing semaphores */ -/* Used instead of CAP_CHOWN to "chown" IPC message queues, semaphores - and shared memory */ -/* Allow locking/unlocking of shared memory segment */ -/* Allow turning swap on/off */ -/* Allow forged pids on socket credentials passing */ -/* Allow setting readahead and flushing buffers on block devices */ -/* Allow setting geometry in floppy driver */ -/* Allow turning DMA on/off in xd driver */ -/* Allow administration of md devices (mostly the above, but some - extra ioctls) */ -/* Allow tuning the ide driver */ -/* Allow access to the nvram device */ -/* Allow administration of apm_bios, serial and bttv (TV) device */ -/* Allow manufacturer commands in isdn CAPI support driver */ -/* Allow reading non-standardized portions of pci configuration space */ -/* Allow DDI debug ioctl on sbpcd driver */ -/* Allow setting up serial ports */ -/* Allow sending raw qic-117 commands */ -/* Allow enabling/disabling tagged queuing on SCSI controllers and sending - arbitrary SCSI commands */ -/* Allow setting encryption key on loopback filesystem */ -/* Allow setting zone reclaim policy */ - -#define CAP_SYS_ADMIN 21 - -/* Allow use of reboot() */ - -#define CAP_SYS_BOOT 22 - -/* Allow raising priority and setting priority on other (different - UID) processes */ -/* Allow use of FIFO and round-robin (realtime) scheduling on own - processes and setting the scheduling algorithm used by another - process. */ -/* Allow setting cpu affinity on other processes */ - -#define CAP_SYS_NICE 23 - -/* Override resource limits. Set resource limits. */ -/* Override quota limits. */ -/* Override reserved space on ext2 filesystem */ -/* Modify data journaling mode on ext3 filesystem (uses journaling - resources) */ -/* NOTE: ext2 honors fsuid when checking for resource overrides, so - you can override using fsuid too */ -/* Override size restrictions on IPC message queues */ -/* Allow more than 64hz interrupts from the real-time clock */ -/* Override max number of consoles on console allocation */ -/* Override max number of keymaps */ - -#define CAP_SYS_RESOURCE 24 - -/* Allow manipulation of system clock */ -/* Allow irix_stime on mips */ -/* Allow setting the real-time clock */ - -#define CAP_SYS_TIME 25 - -/* Allow configuration of tty devices */ -/* Allow vhangup() of tty */ - -#define CAP_SYS_TTY_CONFIG 26 - -/* Allow the privileged aspects of mknod() */ - -#define CAP_MKNOD 27 - -/* Allow taking of leases on files */ - -#define CAP_LEASE 28 - -#define CAP_AUDIT_WRITE 29 - -#define CAP_AUDIT_CONTROL 30 - -#define CAP_SETFCAP 31 - -/* Override MAC access. - The base kernel enforces no MAC policy. - An LSM may enforce a MAC policy, and if it does and it chooses - to implement capability based overrides of that policy, this is - the capability it should use to do so. */ - -#define CAP_MAC_OVERRIDE 32 - -/* Allow MAC configuration or state changes. - The base kernel requires no MAC configuration. - An LSM may enforce a MAC policy, and if it does and it chooses - to implement capability based checks on modifications to that - policy or the data required to maintain it, this is the - capability it should use to do so. */ - -#define CAP_MAC_ADMIN 33 - -/* Allow configuring the kernel's syslog (printk behaviour) */ - -#define CAP_SYSLOG 34 - -/* Allow triggering something that will wake the system */ - -#define CAP_WAKE_ALARM 35 - -/* Allow preventing system suspends */ - -#define CAP_BLOCK_SUSPEND 36 - -#define CAP_LAST_CAP CAP_BLOCK_SUSPEND - -#define cap_valid(x) ((x) >= 0 && (x) <= CAP_LAST_CAP) - -/* - * Bit location of each capability (used by user-space library and kernel) - */ - -#define CAP_TO_INDEX(x) ((x) >> 5) /* 1 << 5 == bits in __u32 */ -#define CAP_TO_MASK(x) (1 << ((x) & 31)) /* mask for indexed __u32 */ - -#ifdef __KERNEL__ struct inode; struct dentry; @@ -557,6 +215,4 @@ extern bool inode_capable(const struct inode *inode, int cap); /* audit system wants to get cap info from files as well */ extern int get_vfs_caps_from_disk(const struct dentry *dentry, struct cpu_vfs_cap_data *cpu_caps); -#endif /* __KERNEL__ */ - #endif /* !_LINUX_CAPABILITY_H */ diff --git a/include/linux/cciss_ioctl.h b/include/linux/cciss_ioctl.h index 986493f5b92..84b6e2d0f44 100644 --- a/include/linux/cciss_ioctl.h +++ b/include/linux/cciss_ioctl.h @@ -1,91 +1,8 @@ #ifndef CCISS_IOCTLH #define CCISS_IOCTLH -#include <linux/types.h> -#include <linux/ioctl.h> -#include <linux/cciss_defs.h> +#include <uapi/linux/cciss_ioctl.h> -#define CCISS_IOC_MAGIC 'B' - - -typedef struct _cciss_pci_info_struct -{ - unsigned char bus; - unsigned char dev_fn; - unsigned short domain; - __u32 board_id; -} cciss_pci_info_struct; - -typedef struct _cciss_coalint_struct -{ - __u32 delay; - __u32 count; -} cciss_coalint_struct; - -typedef char NodeName_type[16]; - -typedef __u32 Heartbeat_type; - -#define CISS_PARSCSIU2 0x0001 -#define CISS_PARCSCIU3 0x0002 -#define CISS_FIBRE1G 0x0100 -#define CISS_FIBRE2G 0x0200 -typedef __u32 BusTypes_type; - -typedef char FirmwareVer_type[4]; -typedef __u32 DriverVer_type; - -#define MAX_KMALLOC_SIZE 128000 - -typedef struct _IOCTL_Command_struct { - LUNAddr_struct LUN_info; - RequestBlock_struct Request; - ErrorInfo_struct error_info; - WORD buf_size; /* size in bytes of the buf */ - BYTE __user *buf; -} IOCTL_Command_struct; - -typedef struct _BIG_IOCTL_Command_struct { - LUNAddr_struct LUN_info; - RequestBlock_struct Request; - ErrorInfo_struct error_info; - DWORD malloc_size; /* < MAX_KMALLOC_SIZE in cciss.c */ - DWORD buf_size; /* size in bytes of the buf */ - /* < malloc_size * MAXSGENTRIES */ - BYTE __user *buf; -} BIG_IOCTL_Command_struct; - -typedef struct _LogvolInfo_struct{ - __u32 LunID; - int num_opens; /* number of opens on the logical volume */ - int num_parts; /* number of partitions configured on logvol */ -} LogvolInfo_struct; - -#define CCISS_GETPCIINFO _IOR(CCISS_IOC_MAGIC, 1, cciss_pci_info_struct) - -#define CCISS_GETINTINFO _IOR(CCISS_IOC_MAGIC, 2, cciss_coalint_struct) -#define CCISS_SETINTINFO _IOW(CCISS_IOC_MAGIC, 3, cciss_coalint_struct) - -#define CCISS_GETNODENAME _IOR(CCISS_IOC_MAGIC, 4, NodeName_type) -#define CCISS_SETNODENAME _IOW(CCISS_IOC_MAGIC, 5, NodeName_type) - -#define CCISS_GETHEARTBEAT _IOR(CCISS_IOC_MAGIC, 6, Heartbeat_type) -#define CCISS_GETBUSTYPES _IOR(CCISS_IOC_MAGIC, 7, BusTypes_type) -#define CCISS_GETFIRMVER _IOR(CCISS_IOC_MAGIC, 8, FirmwareVer_type) -#define CCISS_GETDRIVVER _IOR(CCISS_IOC_MAGIC, 9, DriverVer_type) -#define CCISS_REVALIDVOLS _IO(CCISS_IOC_MAGIC, 10) -#define CCISS_PASSTHRU _IOWR(CCISS_IOC_MAGIC, 11, IOCTL_Command_struct) -#define CCISS_DEREGDISK _IO(CCISS_IOC_MAGIC, 12) - -/* no longer used... use REGNEWD instead */ -#define CCISS_REGNEWDISK _IOW(CCISS_IOC_MAGIC, 13, int) - -#define CCISS_REGNEWD _IO(CCISS_IOC_MAGIC, 14) -#define CCISS_RESCANDISK _IO(CCISS_IOC_MAGIC, 16) -#define CCISS_GETLUNINFO _IOR(CCISS_IOC_MAGIC, 17, LogvolInfo_struct) -#define CCISS_BIG_PASSTHRU _IOWR(CCISS_IOC_MAGIC, 18, BIG_IOCTL_Command_struct) - -#ifdef __KERNEL__ #ifdef CONFIG_COMPAT /* 32 bit compatible ioctl structs */ @@ -111,5 +28,4 @@ typedef struct _BIG_IOCTL32_Command_struct { #define CCISS_BIG_PASSTHRU32 _IOWR(CCISS_IOC_MAGIC, 18, BIG_IOCTL32_Command_struct) #endif /* CONFIG_COMPAT */ -#endif /* __KERNEL__ */ #endif diff --git a/include/linux/cdrom.h b/include/linux/cdrom.h index dfd7f187c35..8609d577bb6 100644 --- a/include/linux/cdrom.h +++ b/include/linux/cdrom.h @@ -7,910 +7,12 @@ * 1997, 1998 Erik Andersen, andersee@debian.org * 1998-2002 Jens Axboe, axboe@suse.de */ - #ifndef _LINUX_CDROM_H #define _LINUX_CDROM_H -#include <linux/types.h> -#include <asm/byteorder.h> - -/******************************************************* - * As of Linux 2.1.x, all Linux CD-ROM application programs will use this - * (and only this) include file. It is my hope to provide Linux with - * a uniform interface between software accessing CD-ROMs and the various - * device drivers that actually talk to the drives. There may still be - * 23 different kinds of strange CD-ROM drives, but at least there will - * now be one, and only one, Linux CD-ROM interface. - * - * Additionally, as of Linux 2.1.x, all Linux application programs - * should use the O_NONBLOCK option when opening a CD-ROM device - * for subsequent ioctl commands. This allows for neat system errors - * like "No medium found" or "Wrong medium type" upon attempting to - * mount or play an empty slot, mount an audio disc, or play a data disc. - * Generally, changing an application program to support O_NONBLOCK - * is as easy as the following: - * - drive = open("/dev/cdrom", O_RDONLY); - * + drive = open("/dev/cdrom", O_RDONLY | O_NONBLOCK); - * It is worth the small change. - * - * Patches for many common CD programs (provided by David A. van Leeuwen) - * can be found at: ftp://ftp.gwdg.de/pub/linux/cdrom/drivers/cm206/ - * - *******************************************************/ - -/* When a driver supports a certain function, but the cdrom drive we are - * using doesn't, we will return the error EDRIVE_CANT_DO_THIS. We will - * borrow the "Operation not supported" error from the network folks to - * accomplish this. Maybe someday we will get a more targeted error code, - * but this will do for now... */ -#define EDRIVE_CANT_DO_THIS EOPNOTSUPP - -/******************************************************* - * The CD-ROM IOCTL commands -- these should be supported by - * all the various cdrom drivers. For the CD-ROM ioctls, we - * will commandeer byte 0x53, or 'S'. - *******************************************************/ -#define CDROMPAUSE 0x5301 /* Pause Audio Operation */ -#define CDROMRESUME 0x5302 /* Resume paused Audio Operation */ -#define CDROMPLAYMSF 0x5303 /* Play Audio MSF (struct cdrom_msf) */ -#define CDROMPLAYTRKIND 0x5304 /* Play Audio Track/index - (struct cdrom_ti) */ -#define CDROMREADTOCHDR 0x5305 /* Read TOC header - (struct cdrom_tochdr) */ -#define CDROMREADTOCENTRY 0x5306 /* Read TOC entry - (struct cdrom_tocentry) */ -#define CDROMSTOP 0x5307 /* Stop the cdrom drive */ -#define CDROMSTART 0x5308 /* Start the cdrom drive */ -#define CDROMEJECT 0x5309 /* Ejects the cdrom media */ -#define CDROMVOLCTRL 0x530a /* Control output volume - (struct cdrom_volctrl) */ -#define CDROMSUBCHNL 0x530b /* Read subchannel data - (struct cdrom_subchnl) */ -#define CDROMREADMODE2 0x530c /* Read CDROM mode 2 data (2336 Bytes) - (struct cdrom_read) */ -#define CDROMREADMODE1 0x530d /* Read CDROM mode 1 data (2048 Bytes) - (struct cdrom_read) */ -#define CDROMREADAUDIO 0x530e /* (struct cdrom_read_audio) */ -#define CDROMEJECT_SW 0x530f /* enable(1)/disable(0) auto-ejecting */ -#define CDROMMULTISESSION 0x5310 /* Obtain the start-of-last-session - address of multi session disks - (struct cdrom_multisession) */ -#define CDROM_GET_MCN 0x5311 /* Obtain the "Universal Product Code" - if available (struct cdrom_mcn) */ -#define CDROM_GET_UPC CDROM_GET_MCN /* This one is deprecated, - but here anyway for compatibility */ -#define CDROMRESET 0x5312 /* hard-reset the drive */ -#define CDROMVOLREAD 0x5313 /* Get the drive's volume setting - (struct cdrom_volctrl) */ -#define CDROMREADRAW 0x5314 /* read data in raw mode (2352 Bytes) - (struct cdrom_read) */ -/* - * These ioctls are used only used in aztcd.c and optcd.c - */ -#define CDROMREADCOOKED 0x5315 /* read data in cooked mode */ -#define CDROMSEEK 0x5316 /* seek msf address */ - -/* - * This ioctl is only used by the scsi-cd driver. - It is for playing audio in logical block addressing mode. - */ -#define CDROMPLAYBLK 0x5317 /* (struct cdrom_blk) */ - -/* - * These ioctls are only used in optcd.c - */ -#define CDROMREADALL 0x5318 /* read all 2646 bytes */ - -/* - * These ioctls are (now) only in ide-cd.c for controlling - * drive spindown time. They should be implemented in the - * Uniform driver, via generic packet commands, GPCMD_MODE_SELECT_10, - * GPCMD_MODE_SENSE_10 and the GPMODE_POWER_PAGE... - * -Erik - */ -#define CDROMGETSPINDOWN 0x531d -#define CDROMSETSPINDOWN 0x531e - -/* - * These ioctls are implemented through the uniform CD-ROM driver - * They _will_ be adopted by all CD-ROM drivers, when all the CD-ROM - * drivers are eventually ported to the uniform CD-ROM driver interface. - */ -#define CDROMCLOSETRAY 0x5319 /* pendant of CDROMEJECT */ -#define CDROM_SET_OPTIONS 0x5320 /* Set behavior options */ -#define CDROM_CLEAR_OPTIONS 0x5321 /* Clear behavior options */ -#define CDROM_SELECT_SPEED 0x5322 /* Set the CD-ROM speed */ -#define CDROM_SELECT_DISC 0x5323 /* Select disc (for juke-boxes) */ -#define CDROM_MEDIA_CHANGED 0x5325 /* Check is media changed */ -#define CDROM_DRIVE_STATUS 0x5326 /* Get tray position, etc. */ -#define CDROM_DISC_STATUS 0x5327 /* Get disc type, etc. */ -#define CDROM_CHANGER_NSLOTS 0x5328 /* Get number of slots */ -#define CDROM_LOCKDOOR 0x5329 /* lock or unlock door */ -#define CDROM_DEBUG 0x5330 /* Turn debug messages on/off */ -#define CDROM_GET_CAPABILITY 0x5331 /* get capabilities */ - -/* Note that scsi/scsi_ioctl.h also uses 0x5382 - 0x5386. - * Future CDROM ioctls should be kept below 0x537F - */ - -/* This ioctl is only used by sbpcd at the moment */ -#define CDROMAUDIOBUFSIZ 0x5382 /* set the audio buffer size */ - /* conflict with SCSI_IOCTL_GET_IDLUN */ - -/* DVD-ROM Specific ioctls */ -#define DVD_READ_STRUCT 0x5390 /* Read structure */ -#define DVD_WRITE_STRUCT 0x5391 /* Write structure */ -#define DVD_AUTH 0x5392 /* Authentication */ - -#define CDROM_SEND_PACKET 0x5393 /* send a packet to the drive */ -#define CDROM_NEXT_WRITABLE 0x5394 /* get next writable block */ -#define CDROM_LAST_WRITTEN 0x5395 /* get last block written on disc */ - -/******************************************************* - * CDROM IOCTL structures - *******************************************************/ - -/* Address in MSF format */ -struct cdrom_msf0 -{ - __u8 minute; - __u8 second; - __u8 frame; -}; - -/* Address in either MSF or logical format */ -union cdrom_addr -{ - struct cdrom_msf0 msf; - int lba; -}; - -/* This struct is used by the CDROMPLAYMSF ioctl */ -struct cdrom_msf -{ - __u8 cdmsf_min0; /* start minute */ - __u8 cdmsf_sec0; /* start second */ - __u8 cdmsf_frame0; /* start frame */ - __u8 cdmsf_min1; /* end minute */ - __u8 cdmsf_sec1; /* end second */ - __u8 cdmsf_frame1; /* end frame */ -}; - -/* This struct is used by the CDROMPLAYTRKIND ioctl */ -struct cdrom_ti -{ - __u8 cdti_trk0; /* start track */ - __u8 cdti_ind0; /* start index */ - __u8 cdti_trk1; /* end track */ - __u8 cdti_ind1; /* end index */ -}; - -/* This struct is used by the CDROMREADTOCHDR ioctl */ -struct cdrom_tochdr -{ - __u8 cdth_trk0; /* start track */ - __u8 cdth_trk1; /* end track */ -}; - -/* This struct is used by the CDROMVOLCTRL and CDROMVOLREAD ioctls */ -struct cdrom_volctrl -{ - __u8 channel0; - __u8 channel1; - __u8 channel2; - __u8 channel3; -}; - -/* This struct is used by the CDROMSUBCHNL ioctl */ -struct cdrom_subchnl -{ - __u8 cdsc_format; - __u8 cdsc_audiostatus; - __u8 cdsc_adr: 4; - __u8 cdsc_ctrl: 4; - __u8 cdsc_trk; - __u8 cdsc_ind; - union cdrom_addr cdsc_absaddr; - union cdrom_addr cdsc_reladdr; -}; - - -/* This struct is used by the CDROMREADTOCENTRY ioctl */ -struct cdrom_tocentry -{ - __u8 cdte_track; - __u8 cdte_adr :4; - __u8 cdte_ctrl :4; - __u8 cdte_format; - union cdrom_addr cdte_addr; - __u8 cdte_datamode; -}; - -/* This struct is used by the CDROMREADMODE1, and CDROMREADMODE2 ioctls */ -struct cdrom_read -{ - int cdread_lba; - char *cdread_bufaddr; - int cdread_buflen; -}; - -/* This struct is used by the CDROMREADAUDIO ioctl */ -struct cdrom_read_audio -{ - union cdrom_addr addr; /* frame address */ - __u8 addr_format; /* CDROM_LBA or CDROM_MSF */ - int nframes; /* number of 2352-byte-frames to read at once */ - __u8 __user *buf; /* frame buffer (size: nframes*2352 bytes) */ -}; - -/* This struct is used with the CDROMMULTISESSION ioctl */ -struct cdrom_multisession -{ - union cdrom_addr addr; /* frame address: start-of-last-session - (not the new "frame 16"!). Only valid - if the "xa_flag" is true. */ - __u8 xa_flag; /* 1: "is XA disk" */ - __u8 addr_format; /* CDROM_LBA or CDROM_MSF */ -}; - -/* This struct is used with the CDROM_GET_MCN ioctl. - * Very few audio discs actually have Universal Product Code information, - * which should just be the Medium Catalog Number on the box. Also note - * that the way the codeis written on CD is _not_ uniform across all discs! - */ -struct cdrom_mcn -{ - __u8 medium_catalog_number[14]; /* 13 ASCII digits, null-terminated */ -}; - -/* This is used by the CDROMPLAYBLK ioctl */ -struct cdrom_blk -{ - unsigned from; - unsigned short len; -}; - -#define CDROM_PACKET_SIZE 12 - -#define CGC_DATA_UNKNOWN 0 -#define CGC_DATA_WRITE 1 -#define CGC_DATA_READ 2 -#define CGC_DATA_NONE 3 - -/* for CDROM_PACKET_COMMAND ioctl */ -struct cdrom_generic_command -{ - unsigned char cmd[CDROM_PACKET_SIZE]; - unsigned char __user *buffer; - unsigned int buflen; - int stat; - struct request_sense __user *sense; - unsigned char data_direction; - int quiet; - int timeout; - void __user *reserved[1]; /* unused, actually */ -}; - -/* - * A CD-ROM physical sector size is 2048, 2052, 2056, 2324, 2332, 2336, - * 2340, or 2352 bytes long. - -* Sector types of the standard CD-ROM data formats: - * - * format sector type user data size (bytes) - * ----------------------------------------------------------------------------- - * 1 (Red Book) CD-DA 2352 (CD_FRAMESIZE_RAW) - * 2 (Yellow Book) Mode1 Form1 2048 (CD_FRAMESIZE) - * 3 (Yellow Book) Mode1 Form2 2336 (CD_FRAMESIZE_RAW0) - * 4 (Green Book) Mode2 Form1 2048 (CD_FRAMESIZE) - * 5 (Green Book) Mode2 Form2 2328 (2324+4 spare bytes) - * - * - * The layout of the standard CD-ROM data formats: - * ----------------------------------------------------------------------------- - * - audio (red): | audio_sample_bytes | - * | 2352 | - * - * - data (yellow, mode1): | sync - head - data - EDC - zero - ECC | - * | 12 - 4 - 2048 - 4 - 8 - 276 | - * - * - data (yellow, mode2): | sync - head - data | - * | 12 - 4 - 2336 | - * - * - XA data (green, mode2 form1): | sync - head - sub - data - EDC - ECC | - * | 12 - 4 - 8 - 2048 - 4 - 276 | - * - * - XA data (green, mode2 form2): | sync - head - sub - data - Spare | - * | 12 - 4 - 8 - 2324 - 4 | - * - */ - -/* Some generally useful CD-ROM information -- mostly based on the above */ -#define CD_MINS 74 /* max. minutes per CD, not really a limit */ -#define CD_SECS 60 /* seconds per minute */ -#define CD_FRAMES 75 /* frames per second */ -#define CD_SYNC_SIZE 12 /* 12 sync bytes per raw data frame */ -#define CD_MSF_OFFSET 150 /* MSF numbering offset of first frame */ -#define CD_CHUNK_SIZE 24 /* lowest-level "data bytes piece" */ -#define CD_NUM_OF_CHUNKS 98 /* chunks per frame */ -#define CD_FRAMESIZE_SUB 96 /* subchannel data "frame" size */ -#define CD_HEAD_SIZE 4 /* header (address) bytes per raw data frame */ -#define CD_SUBHEAD_SIZE 8 /* subheader bytes per raw XA data frame */ -#define CD_EDC_SIZE 4 /* bytes EDC per most raw data frame types */ -#define CD_ZERO_SIZE 8 /* bytes zero per yellow book mode 1 frame */ -#define CD_ECC_SIZE 276 /* bytes ECC per most raw data frame types */ -#define CD_FRAMESIZE 2048 /* bytes per frame, "cooked" mode */ -#define CD_FRAMESIZE_RAW 2352 /* bytes per frame, "raw" mode */ -#define CD_FRAMESIZE_RAWER 2646 /* The maximum possible returned bytes */ -/* most drives don't deliver everything: */ -#define CD_FRAMESIZE_RAW1 (CD_FRAMESIZE_RAW-CD_SYNC_SIZE) /*2340*/ -#define CD_FRAMESIZE_RAW0 (CD_FRAMESIZE_RAW-CD_SYNC_SIZE-CD_HEAD_SIZE) /*2336*/ - -#define CD_XA_HEAD (CD_HEAD_SIZE+CD_SUBHEAD_SIZE) /* "before data" part of raw XA frame */ -#define CD_XA_TAIL (CD_EDC_SIZE+CD_ECC_SIZE) /* "after data" part of raw XA frame */ -#define CD_XA_SYNC_HEAD (CD_SYNC_SIZE+CD_XA_HEAD) /* sync bytes + header of XA frame */ - -/* CD-ROM address types (cdrom_tocentry.cdte_format) */ -#define CDROM_LBA 0x01 /* "logical block": first frame is #0 */ -#define CDROM_MSF 0x02 /* "minute-second-frame": binary, not bcd here! */ - -/* bit to tell whether track is data or audio (cdrom_tocentry.cdte_ctrl) */ -#define CDROM_DATA_TRACK 0x04 - -/* The leadout track is always 0xAA, regardless of # of tracks on disc */ -#define CDROM_LEADOUT 0xAA - -/* audio states (from SCSI-2, but seen with other drives, too) */ -#define CDROM_AUDIO_INVALID 0x00 /* audio status not supported */ -#define CDROM_AUDIO_PLAY 0x11 /* audio play operation in progress */ -#define CDROM_AUDIO_PAUSED 0x12 /* audio play operation paused */ -#define CDROM_AUDIO_COMPLETED 0x13 /* audio play successfully completed */ -#define CDROM_AUDIO_ERROR 0x14 /* audio play stopped due to error */ -#define CDROM_AUDIO_NO_STATUS 0x15 /* no current audio status to return */ - -/* capability flags used with the uniform CD-ROM driver */ -#define CDC_CLOSE_TRAY 0x1 /* caddy systems _can't_ close */ -#define CDC_OPEN_TRAY 0x2 /* but _can_ eject. */ -#define CDC_LOCK 0x4 /* disable manual eject */ -#define CDC_SELECT_SPEED 0x8 /* programmable speed */ -#define CDC_SELECT_DISC 0x10 /* select disc from juke-box */ -#define CDC_MULTI_SESSION 0x20 /* read sessions>1 */ -#define CDC_MCN 0x40 /* Medium Catalog Number */ -#define CDC_MEDIA_CHANGED 0x80 /* media changed */ -#define CDC_PLAY_AUDIO 0x100 /* audio functions */ -#define CDC_RESET 0x200 /* hard reset device */ -#define CDC_DRIVE_STATUS 0x800 /* driver implements drive status */ -#define CDC_GENERIC_PACKET 0x1000 /* driver implements generic packets */ -#define CDC_CD_R 0x2000 /* drive is a CD-R */ -#define CDC_CD_RW 0x4000 /* drive is a CD-RW */ -#define CDC_DVD 0x8000 /* drive is a DVD */ -#define CDC_DVD_R 0x10000 /* drive can write DVD-R */ -#define CDC_DVD_RAM 0x20000 /* drive can write DVD-RAM */ -#define CDC_MO_DRIVE 0x40000 /* drive is an MO device */ -#define CDC_MRW 0x80000 /* drive can read MRW */ -#define CDC_MRW_W 0x100000 /* drive can write MRW */ -#define CDC_RAM 0x200000 /* ok to open for WRITE */ - -/* drive status possibilities returned by CDROM_DRIVE_STATUS ioctl */ -#define CDS_NO_INFO 0 /* if not implemented */ -#define CDS_NO_DISC 1 -#define CDS_TRAY_OPEN 2 -#define CDS_DRIVE_NOT_READY 3 -#define CDS_DISC_OK 4 - -/* return values for the CDROM_DISC_STATUS ioctl */ -/* can also return CDS_NO_[INFO|DISC], from above */ -#define CDS_AUDIO 100 -#define CDS_DATA_1 101 -#define CDS_DATA_2 102 -#define CDS_XA_2_1 103 -#define CDS_XA_2_2 104 -#define CDS_MIXED 105 - -/* User-configurable behavior options for the uniform CD-ROM driver */ -#define CDO_AUTO_CLOSE 0x1 /* close tray on first open() */ -#define CDO_AUTO_EJECT 0x2 /* open tray on last release() */ -#define CDO_USE_FFLAGS 0x4 /* use O_NONBLOCK information on open */ -#define CDO_LOCK 0x8 /* lock tray on open files */ -#define CDO_CHECK_TYPE 0x10 /* check type on open for data */ - -/* Special codes used when specifying changer slots. */ -#define CDSL_NONE (INT_MAX-1) -#define CDSL_CURRENT INT_MAX - -/* For partition based multisession access. IDE can handle 64 partitions - * per drive - SCSI CD-ROM's use minors to differentiate between the - * various drives, so we can't do multisessions the same way there. - * Use the -o session=x option to mount on them. - */ -#define CD_PART_MAX 64 -#define CD_PART_MASK (CD_PART_MAX - 1) - -/********************************************************************* - * Generic Packet commands, MMC commands, and such - *********************************************************************/ - - /* The generic packet command opcodes for CD/DVD Logical Units, - * From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */ -#define GPCMD_BLANK 0xa1 -#define GPCMD_CLOSE_TRACK 0x5b -#define GPCMD_FLUSH_CACHE 0x35 -#define GPCMD_FORMAT_UNIT 0x04 -#define GPCMD_GET_CONFIGURATION 0x46 -#define GPCMD_GET_EVENT_STATUS_NOTIFICATION 0x4a -#define GPCMD_GET_PERFORMANCE 0xac -#define GPCMD_INQUIRY 0x12 -#define GPCMD_LOAD_UNLOAD 0xa6 -#define GPCMD_MECHANISM_STATUS 0xbd -#define GPCMD_MODE_SELECT_10 0x55 -#define GPCMD_MODE_SENSE_10 0x5a -#define GPCMD_PAUSE_RESUME 0x4b -#define GPCMD_PLAY_AUDIO_10 0x45 -#define GPCMD_PLAY_AUDIO_MSF 0x47 -#define GPCMD_PLAY_AUDIO_TI 0x48 -#define GPCMD_PLAY_CD 0xbc -#define GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL 0x1e -#define GPCMD_READ_10 0x28 -#define GPCMD_READ_12 0xa8 -#define GPCMD_READ_BUFFER 0x3c -#define GPCMD_READ_BUFFER_CAPACITY 0x5c -#define GPCMD_READ_CDVD_CAPACITY 0x25 -#define GPCMD_READ_CD 0xbe -#define GPCMD_READ_CD_MSF 0xb9 -#define GPCMD_READ_DISC_INFO 0x51 -#define GPCMD_READ_DVD_STRUCTURE 0xad -#define GPCMD_READ_FORMAT_CAPACITIES 0x23 -#define GPCMD_READ_HEADER 0x44 -#define GPCMD_READ_TRACK_RZONE_INFO 0x52 -#define GPCMD_READ_SUBCHANNEL 0x42 -#define GPCMD_READ_TOC_PMA_ATIP 0x43 -#define GPCMD_REPAIR_RZONE_TRACK 0x58 -#define GPCMD_REPORT_KEY 0xa4 -#define GPCMD_REQUEST_SENSE 0x03 -#define GPCMD_RESERVE_RZONE_TRACK 0x53 -#define GPCMD_SEND_CUE_SHEET 0x5d -#define GPCMD_SCAN 0xba -#define GPCMD_SEEK 0x2b -#define GPCMD_SEND_DVD_STRUCTURE 0xbf -#define GPCMD_SEND_EVENT 0xa2 -#define GPCMD_SEND_KEY 0xa3 -#define GPCMD_SEND_OPC 0x54 -#define GPCMD_SET_READ_AHEAD 0xa7 -#define GPCMD_SET_STREAMING 0xb6 -#define GPCMD_START_STOP_UNIT 0x1b -#define GPCMD_STOP_PLAY_SCAN 0x4e -#define GPCMD_TEST_UNIT_READY 0x00 -#define GPCMD_VERIFY_10 0x2f -#define GPCMD_WRITE_10 0x2a -#define GPCMD_WRITE_12 0xaa -#define GPCMD_WRITE_AND_VERIFY_10 0x2e -#define GPCMD_WRITE_BUFFER 0x3b -/* This is listed as optional in ATAPI 2.6, but is (curiously) - * missing from Mt. Fuji, Table 57. It _is_ mentioned in Mt. Fuji - * Table 377 as an MMC command for SCSi devices though... Most ATAPI - * drives support it. */ -#define GPCMD_SET_SPEED 0xbb -/* This seems to be a SCSI specific CD-ROM opcode - * to play data at track/index */ -#define GPCMD_PLAYAUDIO_TI 0x48 -/* - * From MS Media Status Notification Support Specification. For - * older drives only. - */ -#define GPCMD_GET_MEDIA_STATUS 0xda - -/* Mode page codes for mode sense/set */ -#define GPMODE_VENDOR_PAGE 0x00 -#define GPMODE_R_W_ERROR_PAGE 0x01 -#define GPMODE_WRITE_PARMS_PAGE 0x05 -#define GPMODE_WCACHING_PAGE 0x08 -#define GPMODE_AUDIO_CTL_PAGE 0x0e -#define GPMODE_POWER_PAGE 0x1a -#define GPMODE_FAULT_FAIL_PAGE 0x1c -#define GPMODE_TO_PROTECT_PAGE 0x1d -#define GPMODE_CAPABILITIES_PAGE 0x2a -#define GPMODE_ALL_PAGES 0x3f -/* Not in Mt. Fuji, but in ATAPI 2.6 -- deprecated now in favor - * of MODE_SENSE_POWER_PAGE */ -#define GPMODE_CDROM_PAGE 0x0d - - - -/* DVD struct types */ -#define DVD_STRUCT_PHYSICAL 0x00 -#define DVD_STRUCT_COPYRIGHT 0x01 -#define DVD_STRUCT_DISCKEY 0x02 -#define DVD_STRUCT_BCA 0x03 -#define DVD_STRUCT_MANUFACT 0x04 - -struct dvd_layer { - __u8 book_version : 4; - __u8 book_type : 4; - __u8 min_rate : 4; - __u8 disc_size : 4; - __u8 layer_type : 4; - __u8 track_path : 1; - __u8 nlayers : 2; - __u8 track_density : 4; - __u8 linear_density : 4; - __u8 bca : 1; - __u32 start_sector; - __u32 end_sector; - __u32 end_sector_l0; -}; - -#define DVD_LAYERS 4 - -struct dvd_physical { - __u8 type; - __u8 layer_num; - struct dvd_layer layer[DVD_LAYERS]; -}; - -struct dvd_copyright { - __u8 type; - - __u8 layer_num; - __u8 cpst; - __u8 rmi; -}; - -struct dvd_disckey { - __u8 type; - - unsigned agid : 2; - __u8 value[2048]; -}; - -struct dvd_bca { - __u8 type; - - int len; - __u8 value[188]; -}; - -struct dvd_manufact { - __u8 type; - - __u8 layer_num; - int len; - __u8 value[2048]; -}; - -typedef union { - __u8 type; - - struct dvd_physical physical; - struct dvd_copyright copyright; - struct dvd_disckey disckey; - struct dvd_bca bca; - struct dvd_manufact manufact; -} dvd_struct; - -/* - * DVD authentication ioctl - */ - -/* Authentication states */ -#define DVD_LU_SEND_AGID 0 -#define DVD_HOST_SEND_CHALLENGE 1 -#define DVD_LU_SEND_KEY1 2 -#define DVD_LU_SEND_CHALLENGE 3 -#define DVD_HOST_SEND_KEY2 4 - -/* Termination states */ -#define DVD_AUTH_ESTABLISHED 5 -#define DVD_AUTH_FAILURE 6 - -/* Other functions */ -#define DVD_LU_SEND_TITLE_KEY 7 -#define DVD_LU_SEND_ASF 8 -#define DVD_INVALIDATE_AGID 9 -#define DVD_LU_SEND_RPC_STATE 10 -#define DVD_HOST_SEND_RPC_STATE 11 - -/* State data */ -typedef __u8 dvd_key[5]; /* 40-bit value, MSB is first elem. */ -typedef __u8 dvd_challenge[10]; /* 80-bit value, MSB is first elem. */ - -struct dvd_lu_send_agid { - __u8 type; - unsigned agid : 2; -}; - -struct dvd_host_send_challenge { - __u8 type; - unsigned agid : 2; - - dvd_challenge chal; -}; - -struct dvd_send_key { - __u8 type; - unsigned agid : 2; - - dvd_key key; -}; - -struct dvd_lu_send_challenge { - __u8 type; - unsigned agid : 2; - - dvd_challenge chal; -}; - -#define DVD_CPM_NO_COPYRIGHT 0 -#define DVD_CPM_COPYRIGHTED 1 - -#define DVD_CP_SEC_NONE 0 -#define DVD_CP_SEC_EXIST 1 - -#define DVD_CGMS_UNRESTRICTED 0 -#define DVD_CGMS_SINGLE 2 -#define DVD_CGMS_RESTRICTED 3 - -struct dvd_lu_send_title_key { - __u8 type; - unsigned agid : 2; - - dvd_key title_key; - int lba; - unsigned cpm : 1; - unsigned cp_sec : 1; - unsigned cgms : 2; -}; - -struct dvd_lu_send_asf { - __u8 type; - unsigned agid : 2; - - unsigned asf : 1; -}; - -struct dvd_host_send_rpcstate { - __u8 type; - __u8 pdrc; -}; - -struct dvd_lu_send_rpcstate { - __u8 type : 2; - __u8 vra : 3; - __u8 ucca : 3; - __u8 region_mask; - __u8 rpc_scheme; -}; - -typedef union { - __u8 type; - - struct dvd_lu_send_agid lsa; - struct dvd_host_send_challenge hsc; - struct dvd_send_key lsk; - struct dvd_lu_send_challenge lsc; - struct dvd_send_key hsk; - struct dvd_lu_send_title_key lstk; - struct dvd_lu_send_asf lsasf; - struct dvd_host_send_rpcstate hrpcs; - struct dvd_lu_send_rpcstate lrpcs; -} dvd_authinfo; - -struct request_sense { -#if defined(__BIG_ENDIAN_BITFIELD) - __u8 valid : 1; - __u8 error_code : 7; -#elif defined(__LITTLE_ENDIAN_BITFIELD) - __u8 error_code : 7; - __u8 valid : 1; -#endif - __u8 segment_number; -#if defined(__BIG_ENDIAN_BITFIELD) - __u8 reserved1 : 2; - __u8 ili : 1; - __u8 reserved2 : 1; - __u8 sense_key : 4; -#elif defined(__LITTLE_ENDIAN_BITFIELD) - __u8 sense_key : 4; - __u8 reserved2 : 1; - __u8 ili : 1; - __u8 reserved1 : 2; -#endif - __u8 information[4]; - __u8 add_sense_len; - __u8 command_info[4]; - __u8 asc; - __u8 ascq; - __u8 fruc; - __u8 sks[3]; - __u8 asb[46]; -}; - -/* - * feature profile - */ -#define CDF_RWRT 0x0020 /* "Random Writable" */ -#define CDF_HWDM 0x0024 /* "Hardware Defect Management" */ -#define CDF_MRW 0x0028 - -/* - * media status bits - */ -#define CDM_MRW_NOTMRW 0 -#define CDM_MRW_BGFORMAT_INACTIVE 1 -#define CDM_MRW_BGFORMAT_ACTIVE 2 -#define CDM_MRW_BGFORMAT_COMPLETE 3 - -/* - * mrw address spaces - */ -#define MRW_LBA_DMA 0 -#define MRW_LBA_GAA 1 - -/* - * mrw mode pages (first is deprecated) -- probed at init time and - * cdi->mrw_mode_page is set - */ -#define MRW_MODE_PC_PRE1 0x2c -#define MRW_MODE_PC 0x03 - -struct mrw_feature_desc { - __be16 feature_code; -#if defined(__BIG_ENDIAN_BITFIELD) - __u8 reserved1 : 2; - __u8 feature_version : 4; - __u8 persistent : 1; - __u8 curr : 1; -#elif defined(__LITTLE_ENDIAN_BITFIELD) - __u8 curr : 1; - __u8 persistent : 1; - __u8 feature_version : 4; - __u8 reserved1 : 2; -#endif - __u8 add_len; -#if defined(__BIG_ENDIAN_BITFIELD) - __u8 reserved2 : 7; - __u8 write : 1; -#elif defined(__LITTLE_ENDIAN_BITFIELD) - __u8 write : 1; - __u8 reserved2 : 7; -#endif - __u8 reserved3; - __u8 reserved4; - __u8 reserved5; -}; - -/* cf. mmc4r02g.pdf 5.3.10 Random Writable Feature (0020h) pg 197 of 635 */ -struct rwrt_feature_desc { - __be16 feature_code; -#if defined(__BIG_ENDIAN_BITFIELD) - __u8 reserved1 : 2; - __u8 feature_version : 4; - __u8 persistent : 1; - __u8 curr : 1; -#elif defined(__LITTLE_ENDIAN_BITFIELD) - __u8 curr : 1; - __u8 persistent : 1; - __u8 feature_version : 4; - __u8 reserved1 : 2; -#endif - __u8 add_len; - __u32 last_lba; - __u32 block_size; - __u16 blocking; -#if defined(__BIG_ENDIAN_BITFIELD) - __u8 reserved2 : 7; - __u8 page_present : 1; -#elif defined(__LITTLE_ENDIAN_BITFIELD) - __u8 page_present : 1; - __u8 reserved2 : 7; -#endif - __u8 reserved3; -}; - -typedef struct { - __be16 disc_information_length; -#if defined(__BIG_ENDIAN_BITFIELD) - __u8 reserved1 : 3; - __u8 erasable : 1; - __u8 border_status : 2; - __u8 disc_status : 2; -#elif defined(__LITTLE_ENDIAN_BITFIELD) - __u8 disc_status : 2; - __u8 border_status : 2; - __u8 erasable : 1; - __u8 reserved1 : 3; -#else -#error "Please fix <asm/byteorder.h>" -#endif - __u8 n_first_track; - __u8 n_sessions_lsb; - __u8 first_track_lsb; - __u8 last_track_lsb; -#if defined(__BIG_ENDIAN_BITFIELD) - __u8 did_v : 1; - __u8 dbc_v : 1; - __u8 uru : 1; - __u8 reserved2 : 2; - __u8 dbit : 1; - __u8 mrw_status : 2; -#elif defined(__LITTLE_ENDIAN_BITFIELD) - __u8 mrw_status : 2; - __u8 dbit : 1; - __u8 reserved2 : 2; - __u8 uru : 1; - __u8 dbc_v : 1; - __u8 did_v : 1; -#endif - __u8 disc_type; - __u8 n_sessions_msb; - __u8 first_track_msb; - __u8 last_track_msb; - __u32 disc_id; - __u32 lead_in; - __u32 lead_out; - __u8 disc_bar_code[8]; - __u8 reserved3; - __u8 n_opc; -} disc_information; - -typedef struct { - __be16 track_information_length; - __u8 track_lsb; - __u8 session_lsb; - __u8 reserved1; -#if defined(__BIG_ENDIAN_BITFIELD) - __u8 reserved2 : 2; - __u8 damage : 1; - __u8 copy : 1; - __u8 track_mode : 4; - __u8 rt : 1; - __u8 blank : 1; - __u8 packet : 1; - __u8 fp : 1; - __u8 data_mode : 4; - __u8 reserved3 : 6; - __u8 lra_v : 1; - __u8 nwa_v : 1; -#elif defined(__LITTLE_ENDIAN_BITFIELD) - __u8 track_mode : 4; - __u8 copy : 1; - __u8 damage : 1; - __u8 reserved2 : 2; - __u8 data_mode : 4; - __u8 fp : 1; - __u8 packet : 1; - __u8 blank : 1; - __u8 rt : 1; - __u8 nwa_v : 1; - __u8 lra_v : 1; - __u8 reserved3 : 6; -#endif - __be32 track_start; - __be32 next_writable; - __be32 free_blocks; - __be32 fixed_packet_size; - __be32 track_size; - __be32 last_rec_address; -} track_information; - -struct feature_header { - __u32 data_len; - __u8 reserved1; - __u8 reserved2; - __u16 curr_profile; -}; - -struct mode_page_header { - __be16 mode_data_length; - __u8 medium_type; - __u8 reserved1; - __u8 reserved2; - __u8 reserved3; - __be16 desc_length; -}; - -#ifdef __KERNEL__ #include <linux/fs.h> /* not really needed, later.. */ #include <linux/list.h> +#include <uapi/linux/cdrom.h> struct packet_command { @@ -1209,6 +311,4 @@ static inline int msf_to_lba(u8 m, u8 s, u8 f) { return (((m * CD_SECS) + s) * CD_FRAMES + f) - CD_MSF_OFFSET; } -#endif /* End of kernel only stuff */ - #endif /* _LINUX_CDROM_H */ diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h index fbe89e17124..4dceaf8ae15 100644 --- a/include/linux/clocksource.h +++ b/include/linux/clocksource.h @@ -319,22 +319,6 @@ static inline void __clocksource_updatefreq_khz(struct clocksource *cs, u32 khz) __clocksource_updatefreq_scale(cs, 1000, khz); } -#ifdef CONFIG_GENERIC_TIME_VSYSCALL -extern void -update_vsyscall(struct timespec *ts, struct timespec *wtm, - struct clocksource *c, u32 mult); -extern void update_vsyscall_tz(void); -#else -static inline void -update_vsyscall(struct timespec *ts, struct timespec *wtm, - struct clocksource *c, u32 mult) -{ -} - -static inline void update_vsyscall_tz(void) -{ -} -#endif extern void timekeeping_notify(struct clocksource *clock); diff --git a/include/linux/cm4000_cs.h b/include/linux/cm4000_cs.h index 3c4aac40617..88bee3a3309 100644 --- a/include/linux/cm4000_cs.h +++ b/include/linux/cm4000_cs.h @@ -1,68 +1,10 @@ #ifndef _CM4000_H_ #define _CM4000_H_ -#include <linux/types.h> +#include <uapi/linux/cm4000_cs.h> -#define MAX_ATR 33 - -#define CM4000_MAX_DEV 4 - -/* those two structures are passed via ioctl() from/to userspace. They are - * used by existing userspace programs, so I kepth the awkward "bIFSD" naming - * not to break compilation of userspace apps. -HW */ - -typedef struct atreq { - __s32 atr_len; - unsigned char atr[64]; - __s32 power_act; - unsigned char bIFSD; - unsigned char bIFSC; -} atreq_t; - - -/* what is particularly stupid in the original driver is the arch-dependent - * member sizes. This leads to CONFIG_COMPAT breakage, since 32bit userspace - * will lay out the structure members differently than the 64bit kernel. - * - * I've changed "ptsreq.protocol" from "unsigned long" to "__u32". - * On 32bit this will make no difference. With 64bit kernels, it will make - * 32bit apps work, too. - */ - -typedef struct ptsreq { - __u32 protocol; /*T=0: 2^0, T=1: 2^1*/ - unsigned char flags; - unsigned char pts1; - unsigned char pts2; - unsigned char pts3; -} ptsreq_t; - -#define CM_IOC_MAGIC 'c' -#define CM_IOC_MAXNR 255 - -#define CM_IOCGSTATUS _IOR (CM_IOC_MAGIC, 0, unsigned char *) -#define CM_IOCGATR _IOWR(CM_IOC_MAGIC, 1, atreq_t *) -#define CM_IOCSPTS _IOW (CM_IOC_MAGIC, 2, ptsreq_t *) -#define CM_IOCSRDR _IO (CM_IOC_MAGIC, 3) -#define CM_IOCARDOFF _IO (CM_IOC_MAGIC, 4) - -#define CM_IOSDBGLVL _IOW(CM_IOC_MAGIC, 250, int*) - -/* card and device states */ -#define CM_CARD_INSERTED 0x01 -#define CM_CARD_POWERED 0x02 -#define CM_ATR_PRESENT 0x04 -#define CM_ATR_VALID 0x08 -#define CM_STATE_VALID 0x0f -/* extra info only from CM4000 */ -#define CM_NO_READER 0x10 -#define CM_BAD_CARD 0x20 - - -#ifdef __KERNEL__ #define DEVICE_NAME "cmm" #define MODULE_NAME "cm4000_cs" -#endif /* __KERNEL__ */ #endif /* _CM4000_H_ */ diff --git a/include/linux/cn_proc.h b/include/linux/cn_proc.h index d03612b196e..2c1bc1ea04e 100644 --- a/include/linux/cn_proc.h +++ b/include/linux/cn_proc.h @@ -14,111 +14,11 @@ * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. */ - #ifndef CN_PROC_H #define CN_PROC_H -#include <linux/types.h> - -/* - * Userspace sends this enum to register with the kernel that it is listening - * for events on the connector. - */ -enum proc_cn_mcast_op { - PROC_CN_MCAST_LISTEN = 1, - PROC_CN_MCAST_IGNORE = 2 -}; - -/* - * From the user's point of view, the process - * ID is the thread group ID and thread ID is the internal - * kernel "pid". So, fields are assigned as follow: - * - * In user space - In kernel space - * - * parent process ID = parent->tgid - * parent thread ID = parent->pid - * child process ID = child->tgid - * child thread ID = child->pid - */ - -struct proc_event { - enum what { - /* Use successive bits so the enums can be used to record - * sets of events as well - */ - PROC_EVENT_NONE = 0x00000000, - PROC_EVENT_FORK = 0x00000001, - PROC_EVENT_EXEC = 0x00000002, - PROC_EVENT_UID = 0x00000004, - PROC_EVENT_GID = 0x00000040, - PROC_EVENT_SID = 0x00000080, - PROC_EVENT_PTRACE = 0x00000100, - PROC_EVENT_COMM = 0x00000200, - /* "next" should be 0x00000400 */ - /* "last" is the last process event: exit */ - PROC_EVENT_EXIT = 0x80000000 - } what; - __u32 cpu; - __u64 __attribute__((aligned(8))) timestamp_ns; - /* Number of nano seconds since system boot */ - union { /* must be last field of proc_event struct */ - struct { - __u32 err; - } ack; - - struct fork_proc_event { - __kernel_pid_t parent_pid; - __kernel_pid_t parent_tgid; - __kernel_pid_t child_pid; - __kernel_pid_t child_tgid; - } fork; - - struct exec_proc_event { - __kernel_pid_t process_pid; - __kernel_pid_t process_tgid; - } exec; - - struct id_proc_event { - __kernel_pid_t process_pid; - __kernel_pid_t process_tgid; - union { - __u32 ruid; /* task uid */ - __u32 rgid; /* task gid */ - } r; - union { - __u32 euid; - __u32 egid; - } e; - } id; - - struct sid_proc_event { - __kernel_pid_t process_pid; - __kernel_pid_t process_tgid; - } sid; - - struct ptrace_proc_event { - __kernel_pid_t process_pid; - __kernel_pid_t process_tgid; - __kernel_pid_t tracer_pid; - __kernel_pid_t tracer_tgid; - } ptrace; - - struct comm_proc_event { - __kernel_pid_t process_pid; - __kernel_pid_t process_tgid; - char comm[16]; - } comm; - - struct exit_proc_event { - __kernel_pid_t process_pid; - __kernel_pid_t process_tgid; - __u32 exit_code, exit_signal; - } exit; - } event_data; -}; +#include <uapi/linux/cn_proc.h> -#ifdef __KERNEL__ #ifdef CONFIG_PROC_EVENTS void proc_fork_connector(struct task_struct *task); void proc_exec_connector(struct task_struct *task); @@ -151,5 +51,4 @@ static inline void proc_ptrace_connector(struct task_struct *task, static inline void proc_exit_connector(struct task_struct *task) {} #endif /* CONFIG_PROC_EVENTS */ -#endif /* __KERNEL__ */ #endif /* CN_PROC_H */ diff --git a/include/linux/coda.h b/include/linux/coda.h index 96c87693800..cff544f8110 100644 --- a/include/linux/coda.h +++ b/include/linux/coda.h @@ -55,690 +55,12 @@ Mellon the rights to redistribute these changes without encumbrance. * Linux modifications by * Peter Braam, Aug 1996 */ - #ifndef _CODA_HEADER_ #define _CODA_HEADER_ - -/* Catch new _KERNEL defn for NetBSD and DJGPP/__CYGWIN32__ */ -#if defined(__NetBSD__) || \ - ((defined(DJGPP) || defined(__CYGWIN32__)) && !defined(KERNEL)) -#include <sys/types.h> -#endif - -#ifndef CODA_MAXSYMLINKS -#define CODA_MAXSYMLINKS 10 -#endif - -#if defined(DJGPP) || defined(__CYGWIN32__) -#ifdef KERNEL -typedef unsigned long u_long; -typedef unsigned int u_int; -typedef unsigned short u_short; -typedef u_long ino_t; -typedef u_long dev_t; -typedef void * caddr_t; -#ifdef DOS -typedef unsigned __int64 u_quad_t; -#else -typedef unsigned long long u_quad_t; -#endif - -#define inline - -struct timespec { - long ts_sec; - long ts_nsec; -}; -#else /* DJGPP but not KERNEL */ -#include <sys/time.h> -typedef unsigned long long u_quad_t; -#endif /* !KERNEL */ -#endif /* !DJGPP */ - - #if defined(__linux__) -#include <linux/time.h> -#define cdev_t u_quad_t -#ifndef __KERNEL__ -#if !defined(_UQUAD_T_) && (!defined(__GLIBC__) || __GLIBC__ < 2) -#define _UQUAD_T_ 1 typedef unsigned long long u_quad_t; -#endif -#else /*__KERNEL__ */ -typedef unsigned long long u_quad_t; -#endif /* __KERNEL__ */ #else -#define cdev_t dev_t -#endif - -#ifdef __CYGWIN32__ -struct timespec { - time_t tv_sec; /* seconds */ - long tv_nsec; /* nanoseconds */ -}; -#endif - -#ifndef __BIT_TYPES_DEFINED__ -#define __BIT_TYPES_DEFINED__ -typedef signed char int8_t; -typedef unsigned char u_int8_t; -typedef short int16_t; -typedef unsigned short u_int16_t; -typedef int int32_t; -typedef unsigned int u_int32_t; -#endif - - -/* - * Cfs constants - */ -#define CODA_MAXNAMLEN 255 -#define CODA_MAXPATHLEN 1024 -#define CODA_MAXSYMLINK 10 - -/* these are Coda's version of O_RDONLY etc combinations - * to deal with VFS open modes - */ -#define C_O_READ 0x001 -#define C_O_WRITE 0x002 -#define C_O_TRUNC 0x010 -#define C_O_EXCL 0x100 -#define C_O_CREAT 0x200 - -/* these are to find mode bits in Venus */ -#define C_M_READ 00400 -#define C_M_WRITE 00200 - -/* for access Venus will use */ -#define C_A_C_OK 8 /* Test for writing upon create. */ -#define C_A_R_OK 4 /* Test for read permission. */ -#define C_A_W_OK 2 /* Test for write permission. */ -#define C_A_X_OK 1 /* Test for execute permission. */ -#define C_A_F_OK 0 /* Test for existence. */ - - - -#ifndef _VENUS_DIRENT_T_ -#define _VENUS_DIRENT_T_ 1 -struct venus_dirent { - u_int32_t d_fileno; /* file number of entry */ - u_int16_t d_reclen; /* length of this record */ - u_int8_t d_type; /* file type, see below */ - u_int8_t d_namlen; /* length of string in d_name */ - char d_name[CODA_MAXNAMLEN + 1];/* name must be no longer than this */ -}; -#undef DIRSIZ -#define DIRSIZ(dp) ((sizeof (struct venus_dirent) - (CODA_MAXNAMLEN+1)) + \ - (((dp)->d_namlen+1 + 3) &~ 3)) - -/* - * File types - */ -#define CDT_UNKNOWN 0 -#define CDT_FIFO 1 -#define CDT_CHR 2 -#define CDT_DIR 4 -#define CDT_BLK 6 -#define CDT_REG 8 -#define CDT_LNK 10 -#define CDT_SOCK 12 -#define CDT_WHT 14 - -/* - * Convert between stat structure types and directory types. - */ -#define IFTOCDT(mode) (((mode) & 0170000) >> 12) -#define CDTTOIF(dirtype) ((dirtype) << 12) - #endif - -#ifndef _VUID_T_ -#define _VUID_T_ -typedef u_int32_t vuid_t; -typedef u_int32_t vgid_t; -#endif /*_VUID_T_ */ - -struct CodaFid { - u_int32_t opaque[4]; -}; - -#define coda_f2i(fid)\ - (fid ? (fid->opaque[3] ^ (fid->opaque[2]<<10) ^ (fid->opaque[1]<<20) ^ fid->opaque[0]) : 0) - -#ifndef _VENUS_VATTR_T_ -#define _VENUS_VATTR_T_ -/* - * Vnode types. VNON means no type. - */ -enum coda_vtype { C_VNON, C_VREG, C_VDIR, C_VBLK, C_VCHR, C_VLNK, C_VSOCK, C_VFIFO, C_VBAD }; - -struct coda_vattr { - long va_type; /* vnode type (for create) */ - u_short va_mode; /* files access mode and type */ - short va_nlink; /* number of references to file */ - vuid_t va_uid; /* owner user id */ - vgid_t va_gid; /* owner group id */ - long va_fileid; /* file id */ - u_quad_t va_size; /* file size in bytes */ - long va_blocksize; /* blocksize preferred for i/o */ - struct timespec va_atime; /* time of last access */ - struct timespec va_mtime; /* time of last modification */ - struct timespec va_ctime; /* time file changed */ - u_long va_gen; /* generation number of file */ - u_long va_flags; /* flags defined for file */ - cdev_t va_rdev; /* device special file represents */ - u_quad_t va_bytes; /* bytes of disk space held by file */ - u_quad_t va_filerev; /* file modification number */ -}; - +#include <uapi/linux/coda.h> #endif - -/* structure used by CODA_STATFS for getting cache information from venus */ -struct coda_statfs { - int32_t f_blocks; - int32_t f_bfree; - int32_t f_bavail; - int32_t f_files; - int32_t f_ffree; -}; - -/* - * Kernel <--> Venus communications. - */ - -#define CODA_ROOT 2 -#define CODA_OPEN_BY_FD 3 -#define CODA_OPEN 4 -#define CODA_CLOSE 5 -#define CODA_IOCTL 6 -#define CODA_GETATTR 7 -#define CODA_SETATTR 8 -#define CODA_ACCESS 9 -#define CODA_LOOKUP 10 -#define CODA_CREATE 11 -#define CODA_REMOVE 12 -#define CODA_LINK 13 -#define CODA_RENAME 14 -#define CODA_MKDIR 15 -#define CODA_RMDIR 16 -#define CODA_SYMLINK 18 -#define CODA_READLINK 19 -#define CODA_FSYNC 20 -#define CODA_VGET 22 -#define CODA_SIGNAL 23 -#define CODA_REPLACE 24 /* DOWNCALL */ -#define CODA_FLUSH 25 /* DOWNCALL */ -#define CODA_PURGEUSER 26 /* DOWNCALL */ -#define CODA_ZAPFILE 27 /* DOWNCALL */ -#define CODA_ZAPDIR 28 /* DOWNCALL */ -#define CODA_PURGEFID 30 /* DOWNCALL */ -#define CODA_OPEN_BY_PATH 31 -#define CODA_RESOLVE 32 -#define CODA_REINTEGRATE 33 -#define CODA_STATFS 34 -#define CODA_STORE 35 -#define CODA_RELEASE 36 -#define CODA_NCALLS 37 - -#define DOWNCALL(opcode) (opcode >= CODA_REPLACE && opcode <= CODA_PURGEFID) - -#define VC_MAXDATASIZE 8192 -#define VC_MAXMSGSIZE sizeof(union inputArgs)+sizeof(union outputArgs) +\ - VC_MAXDATASIZE - -#define CIOC_KERNEL_VERSION _IOWR('c', 10, size_t) - -#define CODA_KERNEL_VERSION 3 /* 128-bit file identifiers */ - -/* - * Venus <-> Coda RPC arguments - */ -struct coda_in_hdr { - u_int32_t opcode; - u_int32_t unique; /* Keep multiple outstanding msgs distinct */ - pid_t pid; - pid_t pgid; - vuid_t uid; -}; - -/* Really important that opcode and unique are 1st two fields! */ -struct coda_out_hdr { - u_int32_t opcode; - u_int32_t unique; - u_int32_t result; -}; - -/* coda_root: NO_IN */ -struct coda_root_out { - struct coda_out_hdr oh; - struct CodaFid VFid; -}; - -struct coda_root_in { - struct coda_in_hdr in; -}; - -/* coda_open: */ -struct coda_open_in { - struct coda_in_hdr ih; - struct CodaFid VFid; - int flags; -}; - -struct coda_open_out { - struct coda_out_hdr oh; - cdev_t dev; - ino_t inode; -}; - - -/* coda_store: */ -struct coda_store_in { - struct coda_in_hdr ih; - struct CodaFid VFid; - int flags; -}; - -struct coda_store_out { - struct coda_out_hdr out; -}; - -/* coda_release: */ -struct coda_release_in { - struct coda_in_hdr ih; - struct CodaFid VFid; - int flags; -}; - -struct coda_release_out { - struct coda_out_hdr out; -}; - -/* coda_close: */ -struct coda_close_in { - struct coda_in_hdr ih; - struct CodaFid VFid; - int flags; -}; - -struct coda_close_out { - struct coda_out_hdr out; -}; - -/* coda_ioctl: */ -struct coda_ioctl_in { - struct coda_in_hdr ih; - struct CodaFid VFid; - int cmd; - int len; - int rwflag; - char *data; /* Place holder for data. */ -}; - -struct coda_ioctl_out { - struct coda_out_hdr oh; - int len; - caddr_t data; /* Place holder for data. */ -}; - - -/* coda_getattr: */ -struct coda_getattr_in { - struct coda_in_hdr ih; - struct CodaFid VFid; -}; - -struct coda_getattr_out { - struct coda_out_hdr oh; - struct coda_vattr attr; -}; - - -/* coda_setattr: NO_OUT */ -struct coda_setattr_in { - struct coda_in_hdr ih; - struct CodaFid VFid; - struct coda_vattr attr; -}; - -struct coda_setattr_out { - struct coda_out_hdr out; -}; - -/* coda_access: NO_OUT */ -struct coda_access_in { - struct coda_in_hdr ih; - struct CodaFid VFid; - int flags; -}; - -struct coda_access_out { - struct coda_out_hdr out; -}; - - -/* lookup flags */ -#define CLU_CASE_SENSITIVE 0x01 -#define CLU_CASE_INSENSITIVE 0x02 - -/* coda_lookup: */ -struct coda_lookup_in { - struct coda_in_hdr ih; - struct CodaFid VFid; - int name; /* Place holder for data. */ - int flags; -}; - -struct coda_lookup_out { - struct coda_out_hdr oh; - struct CodaFid VFid; - int vtype; -}; - - -/* coda_create: */ -struct coda_create_in { - struct coda_in_hdr ih; - struct CodaFid VFid; - struct coda_vattr attr; - int excl; - int mode; - int name; /* Place holder for data. */ -}; - -struct coda_create_out { - struct coda_out_hdr oh; - struct CodaFid VFid; - struct coda_vattr attr; -}; - - -/* coda_remove: NO_OUT */ -struct coda_remove_in { - struct coda_in_hdr ih; - struct CodaFid VFid; - int name; /* Place holder for data. */ -}; - -struct coda_remove_out { - struct coda_out_hdr out; -}; - -/* coda_link: NO_OUT */ -struct coda_link_in { - struct coda_in_hdr ih; - struct CodaFid sourceFid; /* cnode to link *to* */ - struct CodaFid destFid; /* Directory in which to place link */ - int tname; /* Place holder for data. */ -}; - -struct coda_link_out { - struct coda_out_hdr out; -}; - - -/* coda_rename: NO_OUT */ -struct coda_rename_in { - struct coda_in_hdr ih; - struct CodaFid sourceFid; - int srcname; - struct CodaFid destFid; - int destname; -}; - -struct coda_rename_out { - struct coda_out_hdr out; -}; - -/* coda_mkdir: */ -struct coda_mkdir_in { - struct coda_in_hdr ih; - struct CodaFid VFid; - struct coda_vattr attr; - int name; /* Place holder for data. */ -}; - -struct coda_mkdir_out { - struct coda_out_hdr oh; - struct CodaFid VFid; - struct coda_vattr attr; -}; - - -/* coda_rmdir: NO_OUT */ -struct coda_rmdir_in { - struct coda_in_hdr ih; - struct CodaFid VFid; - int name; /* Place holder for data. */ -}; - -struct coda_rmdir_out { - struct coda_out_hdr out; -}; - -/* coda_symlink: NO_OUT */ -struct coda_symlink_in { - struct coda_in_hdr ih; - struct CodaFid VFid; /* Directory to put symlink in */ - int srcname; - struct coda_vattr attr; - int tname; -}; - -struct coda_symlink_out { - struct coda_out_hdr out; -}; - -/* coda_readlink: */ -struct coda_readlink_in { - struct coda_in_hdr ih; - struct CodaFid VFid; -}; - -struct coda_readlink_out { - struct coda_out_hdr oh; - int count; - caddr_t data; /* Place holder for data. */ -}; - - -/* coda_fsync: NO_OUT */ -struct coda_fsync_in { - struct coda_in_hdr ih; - struct CodaFid VFid; -}; - -struct coda_fsync_out { - struct coda_out_hdr out; -}; - -/* coda_vget: */ -struct coda_vget_in { - struct coda_in_hdr ih; - struct CodaFid VFid; -}; - -struct coda_vget_out { - struct coda_out_hdr oh; - struct CodaFid VFid; - int vtype; -}; - - -/* CODA_SIGNAL is out-of-band, doesn't need data. */ -/* CODA_INVALIDATE is a venus->kernel call */ -/* CODA_FLUSH is a venus->kernel call */ - -/* coda_purgeuser: */ -/* CODA_PURGEUSER is a venus->kernel call */ -struct coda_purgeuser_out { - struct coda_out_hdr oh; - vuid_t uid; -}; - -/* coda_zapfile: */ -/* CODA_ZAPFILE is a venus->kernel call */ -struct coda_zapfile_out { - struct coda_out_hdr oh; - struct CodaFid CodaFid; -}; - -/* coda_zapdir: */ -/* CODA_ZAPDIR is a venus->kernel call */ -struct coda_zapdir_out { - struct coda_out_hdr oh; - struct CodaFid CodaFid; -}; - -/* coda_purgefid: */ -/* CODA_PURGEFID is a venus->kernel call */ -struct coda_purgefid_out { - struct coda_out_hdr oh; - struct CodaFid CodaFid; -}; - -/* coda_replace: */ -/* CODA_REPLACE is a venus->kernel call */ -struct coda_replace_out { /* coda_replace is a venus->kernel call */ - struct coda_out_hdr oh; - struct CodaFid NewFid; - struct CodaFid OldFid; -}; - -/* coda_open_by_fd: */ -struct coda_open_by_fd_in { - struct coda_in_hdr ih; - struct CodaFid VFid; - int flags; -}; - -struct coda_open_by_fd_out { - struct coda_out_hdr oh; - int fd; - -#ifdef __KERNEL__ - struct file *fh; /* not passed from userspace but used in-kernel only */ -#endif -}; - -/* coda_open_by_path: */ -struct coda_open_by_path_in { - struct coda_in_hdr ih; - struct CodaFid VFid; - int flags; -}; - -struct coda_open_by_path_out { - struct coda_out_hdr oh; - int path; -}; - -/* coda_statfs: NO_IN */ -struct coda_statfs_in { - struct coda_in_hdr in; -}; - -struct coda_statfs_out { - struct coda_out_hdr oh; - struct coda_statfs stat; -}; - -/* - * Occasionally, we don't cache the fid returned by CODA_LOOKUP. - * For instance, if the fid is inconsistent. - * This case is handled by setting the top bit of the type result parameter. - */ -#define CODA_NOCACHE 0x80000000 - -union inputArgs { - struct coda_in_hdr ih; /* NB: every struct below begins with an ih */ - struct coda_open_in coda_open; - struct coda_store_in coda_store; - struct coda_release_in coda_release; - struct coda_close_in coda_close; - struct coda_ioctl_in coda_ioctl; - struct coda_getattr_in coda_getattr; - struct coda_setattr_in coda_setattr; - struct coda_access_in coda_access; - struct coda_lookup_in coda_lookup; - struct coda_create_in coda_create; - struct coda_remove_in coda_remove; - struct coda_link_in coda_link; - struct coda_rename_in coda_rename; - struct coda_mkdir_in coda_mkdir; - struct coda_rmdir_in coda_rmdir; - struct coda_symlink_in coda_symlink; - struct coda_readlink_in coda_readlink; - struct coda_fsync_in coda_fsync; - struct coda_vget_in coda_vget; - struct coda_open_by_fd_in coda_open_by_fd; - struct coda_open_by_path_in coda_open_by_path; - struct coda_statfs_in coda_statfs; -}; - -union outputArgs { - struct coda_out_hdr oh; /* NB: every struct below begins with an oh */ - struct coda_root_out coda_root; - struct coda_open_out coda_open; - struct coda_ioctl_out coda_ioctl; - struct coda_getattr_out coda_getattr; - struct coda_lookup_out coda_lookup; - struct coda_create_out coda_create; - struct coda_mkdir_out coda_mkdir; - struct coda_readlink_out coda_readlink; - struct coda_vget_out coda_vget; - struct coda_purgeuser_out coda_purgeuser; - struct coda_zapfile_out coda_zapfile; - struct coda_zapdir_out coda_zapdir; - struct coda_purgefid_out coda_purgefid; - struct coda_replace_out coda_replace; - struct coda_open_by_fd_out coda_open_by_fd; - struct coda_open_by_path_out coda_open_by_path; - struct coda_statfs_out coda_statfs; -}; - -union coda_downcalls { - /* CODA_INVALIDATE is a venus->kernel call */ - /* CODA_FLUSH is a venus->kernel call */ - struct coda_purgeuser_out purgeuser; - struct coda_zapfile_out zapfile; - struct coda_zapdir_out zapdir; - struct coda_purgefid_out purgefid; - struct coda_replace_out replace; -}; - - -/* - * Used for identifying usage of "Control" and pioctls - */ - -#define PIOCPARM_MASK 0x0000ffff -struct ViceIoctl { - void __user *in; /* Data to be transferred in */ - void __user *out; /* Data to be transferred out */ - u_short in_size; /* Size of input buffer <= 2K */ - u_short out_size; /* Maximum size of output buffer, <= 2K */ -}; - -struct PioctlData { - const char __user *path; - int follow; - struct ViceIoctl vi; -}; - -#define CODA_CONTROL ".CONTROL" -#define CODA_CONTROLLEN 8 -#define CTL_INO -1 - -/* Data passed to mount */ - -#define CODA_MOUNT_VERSION 1 - -struct coda_mount_data { - int version; - int fd; /* Opened device */ -}; - -#endif - diff --git a/include/linux/coda_psdev.h b/include/linux/coda_psdev.h index 72f2d2f0af9..8031d6eef10 100644 --- a/include/linux/coda_psdev.h +++ b/include/linux/coda_psdev.h @@ -1,14 +1,9 @@ #ifndef __CODA_PSDEV_H #define __CODA_PSDEV_H -#include <linux/magic.h> - -#define CODA_PSDEV_MAJOR 67 -#define MAX_CODADEVS 5 /* how many do we allow */ - -#ifdef __KERNEL__ #include <linux/backing-dev.h> #include <linux/mutex.h> +#include <uapi/linux/coda_psdev.h> struct kstatfs; @@ -74,23 +69,4 @@ int venus_statfs(struct dentry *dentry, struct kstatfs *sfs); */ extern struct venus_comm coda_comms[]; -#endif /* __KERNEL__ */ - -/* messages between coda filesystem in kernel and Venus */ -struct upc_req { - struct list_head uc_chain; - caddr_t uc_data; - u_short uc_flags; - u_short uc_inSize; /* Size is at most 5000 bytes */ - u_short uc_outSize; - u_short uc_opcode; /* copied from data to save lookup */ - int uc_unique; - wait_queue_head_t uc_sleep; /* process' wait queue */ -}; - -#define CODA_REQ_ASYNC 0x1 -#define CODA_REQ_READ 0x2 -#define CODA_REQ_WRITE 0x4 -#define CODA_REQ_ABORT 0x8 - #endif diff --git a/include/linux/compiler-gcc4.h b/include/linux/compiler-gcc4.h index 934bc34d5f9..412bc6c2b02 100644 --- a/include/linux/compiler-gcc4.h +++ b/include/linux/compiler-gcc4.h @@ -59,7 +59,7 @@ #if __GNUC_MINOR__ > 0 #define __compiletime_object_size(obj) __builtin_object_size(obj, 0) #endif -#if __GNUC_MINOR__ >= 4 && !defined(__CHECKER__) +#if __GNUC_MINOR__ >= 3 && !defined(__CHECKER__) #define __compiletime_warning(message) __attribute__((warning(message))) #define __compiletime_error(message) __attribute__((error(message))) #endif diff --git a/include/linux/connector.h b/include/linux/connector.h index 76384074262..b2b5a41b6a2 100644 --- a/include/linux/connector.h +++ b/include/linux/connector.h @@ -18,63 +18,9 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ - #ifndef __CONNECTOR_H #define __CONNECTOR_H -#include <linux/types.h> - -/* - * Process Events connector unique ids -- used for message routing - */ -#define CN_IDX_PROC 0x1 -#define CN_VAL_PROC 0x1 -#define CN_IDX_CIFS 0x2 -#define CN_VAL_CIFS 0x1 -#define CN_W1_IDX 0x3 /* w1 communication */ -#define CN_W1_VAL 0x1 -#define CN_IDX_V86D 0x4 -#define CN_VAL_V86D_UVESAFB 0x1 -#define CN_IDX_BB 0x5 /* BlackBoard, from the TSP GPL sampling framework */ -#define CN_DST_IDX 0x6 -#define CN_DST_VAL 0x1 -#define CN_IDX_DM 0x7 /* Device Mapper */ -#define CN_VAL_DM_USERSPACE_LOG 0x1 -#define CN_IDX_DRBD 0x8 -#define CN_VAL_DRBD 0x1 -#define CN_KVP_IDX 0x9 /* HyperV KVP */ -#define CN_KVP_VAL 0x1 /* queries from the kernel */ - -#define CN_NETLINK_USERS 10 /* Highest index + 1 */ - -/* - * Maximum connector's message size. - */ -#define CONNECTOR_MAX_MSG_SIZE 16384 - -/* - * idx and val are unique identifiers which - * are used for message routing and - * must be registered in connector.h for in-kernel usage. - */ - -struct cb_id { - __u32 idx; - __u32 val; -}; - -struct cn_msg { - struct cb_id id; - - __u32 seq; - __u32 ack; - - __u16 len; /* Length of the following data */ - __u16 flags; - __u8 data[0]; -}; - -#ifdef __KERNEL__ #include <linux/atomic.h> @@ -82,6 +28,7 @@ struct cn_msg { #include <linux/workqueue.h> #include <net/sock.h> +#include <uapi/linux/connector.h> #define CN_CBQ_NAMELEN 32 @@ -137,5 +84,4 @@ void cn_queue_free_dev(struct cn_queue_dev *dev); int cn_cb_equal(struct cb_id *, struct cb_id *); -#endif /* __KERNEL__ */ #endif /* __CONNECTOR_H */ diff --git a/include/linux/console.h b/include/linux/console.h index 7201ce4280c..dedb082fe50 100644 --- a/include/linux/console.h +++ b/include/linux/console.h @@ -83,8 +83,14 @@ void give_up_console(const struct consw *sw); int con_debug_enter(struct vc_data *vc); int con_debug_leave(void); #else -#define con_debug_enter(vc) (0) -#define con_debug_leave() (0) +static inline int con_debug_enter(struct vc_data *vc) +{ + return 0; +} +static inline int con_debug_leave(void) +{ + return 0; +} #endif /* scroll */ diff --git a/include/linux/cpu_cooling.h b/include/linux/cpu_cooling.h new file mode 100644 index 00000000000..851530128e6 --- /dev/null +++ b/include/linux/cpu_cooling.h @@ -0,0 +1,58 @@ +/* + * linux/include/linux/cpu_cooling.h + * + * Copyright (C) 2012 Samsung Electronics Co., Ltd(http://www.samsung.com) + * Copyright (C) 2012 Amit Daniel <amit.kachhap@linaro.org> + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + */ + +#ifndef __CPU_COOLING_H__ +#define __CPU_COOLING_H__ + +#include <linux/thermal.h> + +#define CPUFREQ_COOLING_START 0 +#define CPUFREQ_COOLING_STOP 1 + +#ifdef CONFIG_CPU_THERMAL +/** + * cpufreq_cooling_register - function to create cpufreq cooling device. + * @clip_cpus: cpumask of cpus where the frequency constraints will happen + */ +struct thermal_cooling_device *cpufreq_cooling_register( + struct cpumask *clip_cpus); + +/** + * cpufreq_cooling_unregister - function to remove cpufreq cooling device. + * @cdev: thermal cooling device pointer. + */ +void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev); +#else /* !CONFIG_CPU_THERMAL */ +static inline struct thermal_cooling_device *cpufreq_cooling_register( + struct cpumask *clip_cpus) +{ + return NULL; +} +static inline void cpufreq_cooling_unregister( + struct thermal_cooling_device *cdev) +{ + return; +} +#endif /* CONFIG_CPU_THERMAL */ + +#endif /* __CPU_COOLING_H__ */ diff --git a/include/linux/cramfs_fs.h b/include/linux/cramfs_fs.h index 0e7bf272ec2..133789609f2 100644 --- a/include/linux/cramfs_fs.h +++ b/include/linux/cramfs_fs.h @@ -1,94 +1,10 @@ #ifndef __CRAMFS_H #define __CRAMFS_H -#include <linux/types.h> -#include <linux/magic.h> +#include <uapi/linux/cramfs_fs.h> -#define CRAMFS_SIGNATURE "Compressed ROMFS" - -/* - * Width of various bitfields in struct cramfs_inode. - * Primarily used to generate warnings in mkcramfs. - */ -#define CRAMFS_MODE_WIDTH 16 -#define CRAMFS_UID_WIDTH 16 -#define CRAMFS_SIZE_WIDTH 24 -#define CRAMFS_GID_WIDTH 8 -#define CRAMFS_NAMELEN_WIDTH 6 -#define CRAMFS_OFFSET_WIDTH 26 - -/* - * Since inode.namelen is a unsigned 6-bit number, the maximum cramfs - * path length is 63 << 2 = 252. - */ -#define CRAMFS_MAXPATHLEN (((1 << CRAMFS_NAMELEN_WIDTH) - 1) << 2) - -/* - * Reasonably terse representation of the inode data. - */ -struct cramfs_inode { - __u32 mode:CRAMFS_MODE_WIDTH, uid:CRAMFS_UID_WIDTH; - /* SIZE for device files is i_rdev */ - __u32 size:CRAMFS_SIZE_WIDTH, gid:CRAMFS_GID_WIDTH; - /* NAMELEN is the length of the file name, divided by 4 and - rounded up. (cramfs doesn't support hard links.) */ - /* OFFSET: For symlinks and non-empty regular files, this - contains the offset (divided by 4) of the file data in - compressed form (starting with an array of block pointers; - see README). For non-empty directories it is the offset - (divided by 4) of the inode of the first file in that - directory. For anything else, offset is zero. */ - __u32 namelen:CRAMFS_NAMELEN_WIDTH, offset:CRAMFS_OFFSET_WIDTH; -}; - -struct cramfs_info { - __u32 crc; - __u32 edition; - __u32 blocks; - __u32 files; -}; - -/* - * Superblock information at the beginning of the FS. - */ -struct cramfs_super { - __u32 magic; /* 0x28cd3d45 - random number */ - __u32 size; /* length in bytes */ - __u32 flags; /* feature flags */ - __u32 future; /* reserved for future use */ - __u8 signature[16]; /* "Compressed ROMFS" */ - struct cramfs_info fsid; /* unique filesystem info */ - __u8 name[16]; /* user-defined name */ - struct cramfs_inode root; /* root inode data */ -}; - -/* - * Feature flags - * - * 0x00000000 - 0x000000ff: features that work for all past kernels - * 0x00000100 - 0xffffffff: features that don't work for past kernels - */ -#define CRAMFS_FLAG_FSID_VERSION_2 0x00000001 /* fsid version #2 */ -#define CRAMFS_FLAG_SORTED_DIRS 0x00000002 /* sorted dirs */ -#define CRAMFS_FLAG_HOLES 0x00000100 /* support for holes */ -#define CRAMFS_FLAG_WRONG_SIGNATURE 0x00000200 /* reserved */ -#define CRAMFS_FLAG_SHIFTED_ROOT_OFFSET 0x00000400 /* shifted root fs */ - -/* - * Valid values in super.flags. Currently we refuse to mount - * if (flags & ~CRAMFS_SUPPORTED_FLAGS). Maybe that should be - * changed to test super.future instead. - */ -#define CRAMFS_SUPPORTED_FLAGS ( 0x000000ff \ - | CRAMFS_FLAG_HOLES \ - | CRAMFS_FLAG_WRONG_SIGNATURE \ - | CRAMFS_FLAG_SHIFTED_ROOT_OFFSET ) - -#ifdef __KERNEL__ /* Uncompression interfaces to the underlying zlib */ int cramfs_uncompress_block(void *dst, int dstlen, void *src, int srclen); int cramfs_uncompress_init(void); void cramfs_uncompress_exit(void); -#endif /* __KERNEL__ */ - #endif diff --git a/include/linux/cuda.h b/include/linux/cuda.h index 9f9865ff781..b7233282380 100644 --- a/include/linux/cuda.h +++ b/include/linux/cuda.h @@ -4,38 +4,15 @@ * * Copyright (C) 1996 Paul Mackerras. */ - #ifndef _LINUX_CUDA_H #define _LINUX_CUDA_H -/* CUDA commands (2nd byte) */ -#define CUDA_WARM_START 0 -#define CUDA_AUTOPOLL 1 -#define CUDA_GET_6805_ADDR 2 -#define CUDA_GET_TIME 3 -#define CUDA_GET_PRAM 7 -#define CUDA_SET_6805_ADDR 8 -#define CUDA_SET_TIME 9 -#define CUDA_POWERDOWN 0xa -#define CUDA_POWERUP_TIME 0xb -#define CUDA_SET_PRAM 0xc -#define CUDA_MS_RESET 0xd -#define CUDA_SEND_DFAC 0xe -#define CUDA_RESET_SYSTEM 0x11 -#define CUDA_SET_IPL 0x12 -#define CUDA_SET_AUTO_RATE 0x14 -#define CUDA_GET_AUTO_RATE 0x16 -#define CUDA_SET_DEVICE_LIST 0x19 -#define CUDA_GET_DEVICE_LIST 0x1a -#define CUDA_GET_SET_IIC 0x22 +#include <uapi/linux/cuda.h> -#ifdef __KERNEL__ extern int find_via_cuda(void); extern int cuda_request(struct adb_request *req, void (*done)(struct adb_request *), int nbytes, ...); extern void cuda_poll(void); -#endif /* __KERNEL */ - #endif /* _LINUX_CUDA_H */ diff --git a/include/linux/cyclades.h b/include/linux/cyclades.h index a5049eaf782..19ae518f547 100644 --- a/include/linux/cyclades.h +++ b/include/linux/cyclades.h @@ -63,434 +63,11 @@ * * */ - #ifndef _LINUX_CYCLADES_H #define _LINUX_CYCLADES_H -#include <linux/types.h> - -struct cyclades_monitor { - unsigned long int_count; - unsigned long char_count; - unsigned long char_max; - unsigned long char_last; -}; - -/* - * These stats all reflect activity since the device was last initialized. - * (i.e., since the port was opened with no other processes already having it - * open) - */ -struct cyclades_idle_stats { - __kernel_time_t in_use; /* Time device has been in use (secs) */ - __kernel_time_t recv_idle; /* Time since last char received (secs) */ - __kernel_time_t xmit_idle; /* Time since last char transmitted (secs) */ - unsigned long recv_bytes; /* Bytes received */ - unsigned long xmit_bytes; /* Bytes transmitted */ - unsigned long overruns; /* Input overruns */ - unsigned long frame_errs; /* Input framing errors */ - unsigned long parity_errs; /* Input parity errors */ -}; - -#define CYCLADES_MAGIC 0x4359 - -#define CYGETMON 0x435901 -#define CYGETTHRESH 0x435902 -#define CYSETTHRESH 0x435903 -#define CYGETDEFTHRESH 0x435904 -#define CYSETDEFTHRESH 0x435905 -#define CYGETTIMEOUT 0x435906 -#define CYSETTIMEOUT 0x435907 -#define CYGETDEFTIMEOUT 0x435908 -#define CYSETDEFTIMEOUT 0x435909 -#define CYSETRFLOW 0x43590a -#define CYGETRFLOW 0x43590b -#define CYSETRTSDTR_INV 0x43590c -#define CYGETRTSDTR_INV 0x43590d -#define CYZSETPOLLCYCLE 0x43590e -#define CYZGETPOLLCYCLE 0x43590f -#define CYGETCD1400VER 0x435910 -#define CYSETWAIT 0x435912 -#define CYGETWAIT 0x435913 - -/*************** CYCLOM-Z ADDITIONS ***************/ - -#define CZIOC ('M' << 8) -#define CZ_NBOARDS (CZIOC|0xfa) -#define CZ_BOOT_START (CZIOC|0xfb) -#define CZ_BOOT_DATA (CZIOC|0xfc) -#define CZ_BOOT_END (CZIOC|0xfd) -#define CZ_TEST (CZIOC|0xfe) - -#define CZ_DEF_POLL (HZ/25) - -#define MAX_BOARD 4 /* Max number of boards */ -#define MAX_DEV 256 /* Max number of ports total */ -#define CYZ_MAX_SPEED 921600 - -#define CYZ_FIFO_SIZE 16 - -#define CYZ_BOOT_NWORDS 0x100 -struct CYZ_BOOT_CTRL { - unsigned short nboard; - int status[MAX_BOARD]; - int nchannel[MAX_BOARD]; - int fw_rev[MAX_BOARD]; - unsigned long offset; - unsigned long data[CYZ_BOOT_NWORDS]; -}; - - -#ifndef DP_WINDOW_SIZE -/* - * Memory Window Sizes - */ - -#define DP_WINDOW_SIZE (0x00080000) /* window size 512 Kb */ -#define ZE_DP_WINDOW_SIZE (0x00100000) /* window size 1 Mb (Ze and - 8Zo V.2 */ -#define CTRL_WINDOW_SIZE (0x00000080) /* runtime regs 128 bytes */ - -/* - * CUSTOM_REG - Cyclom-Z/PCI Custom Registers Set. The driver - * normally will access only interested on the fpga_id, fpga_version, - * start_cpu and stop_cpu. - */ - -struct CUSTOM_REG { - __u32 fpga_id; /* FPGA Identification Register */ - __u32 fpga_version; /* FPGA Version Number Register */ - __u32 cpu_start; /* CPU start Register (write) */ - __u32 cpu_stop; /* CPU stop Register (write) */ - __u32 misc_reg; /* Miscellaneous Register */ - __u32 idt_mode; /* IDT mode Register */ - __u32 uart_irq_status; /* UART IRQ status Register */ - __u32 clear_timer0_irq; /* Clear timer interrupt Register */ - __u32 clear_timer1_irq; /* Clear timer interrupt Register */ - __u32 clear_timer2_irq; /* Clear timer interrupt Register */ - __u32 test_register; /* Test Register */ - __u32 test_count; /* Test Count Register */ - __u32 timer_select; /* Timer select register */ - __u32 pr_uart_irq_status; /* Prioritized UART IRQ stat Reg */ - __u32 ram_wait_state; /* RAM wait-state Register */ - __u32 uart_wait_state; /* UART wait-state Register */ - __u32 timer_wait_state; /* timer wait-state Register */ - __u32 ack_wait_state; /* ACK wait State Register */ -}; - -/* - * RUNTIME_9060 - PLX PCI9060ES local configuration and shared runtime - * registers. This structure can be used to access the 9060 registers - * (memory mapped). - */ - -struct RUNTIME_9060 { - __u32 loc_addr_range; /* 00h - Local Address Range */ - __u32 loc_addr_base; /* 04h - Local Address Base */ - __u32 loc_arbitr; /* 08h - Local Arbitration */ - __u32 endian_descr; /* 0Ch - Big/Little Endian Descriptor */ - __u32 loc_rom_range; /* 10h - Local ROM Range */ - __u32 loc_rom_base; /* 14h - Local ROM Base */ - __u32 loc_bus_descr; /* 18h - Local Bus descriptor */ - __u32 loc_range_mst; /* 1Ch - Local Range for Master to PCI */ - __u32 loc_base_mst; /* 20h - Local Base for Master PCI */ - __u32 loc_range_io; /* 24h - Local Range for Master IO */ - __u32 pci_base_mst; /* 28h - PCI Base for Master PCI */ - __u32 pci_conf_io; /* 2Ch - PCI configuration for Master IO */ - __u32 filler1; /* 30h */ - __u32 filler2; /* 34h */ - __u32 filler3; /* 38h */ - __u32 filler4; /* 3Ch */ - __u32 mail_box_0; /* 40h - Mail Box 0 */ - __u32 mail_box_1; /* 44h - Mail Box 1 */ - __u32 mail_box_2; /* 48h - Mail Box 2 */ - __u32 mail_box_3; /* 4Ch - Mail Box 3 */ - __u32 filler5; /* 50h */ - __u32 filler6; /* 54h */ - __u32 filler7; /* 58h */ - __u32 filler8; /* 5Ch */ - __u32 pci_doorbell; /* 60h - PCI to Local Doorbell */ - __u32 loc_doorbell; /* 64h - Local to PCI Doorbell */ - __u32 intr_ctrl_stat; /* 68h - Interrupt Control/Status */ - __u32 init_ctrl; /* 6Ch - EEPROM control, Init Control, etc */ -}; - -/* Values for the Local Base Address re-map register */ - -#define WIN_RAM 0x00000001L /* set the sliding window to RAM */ -#define WIN_CREG 0x14000001L /* set the window to custom Registers */ - -/* Values timer select registers */ - -#define TIMER_BY_1M 0x00 /* clock divided by 1M */ -#define TIMER_BY_256K 0x01 /* clock divided by 256k */ -#define TIMER_BY_128K 0x02 /* clock divided by 128k */ -#define TIMER_BY_32K 0x03 /* clock divided by 32k */ - -/****************** ****************** *******************/ -#endif - -#ifndef ZFIRM_ID -/* #include "zfwint.h" */ -/****************** ****************** *******************/ -/* - * This file contains the definitions for interfacing with the - * Cyclom-Z ZFIRM Firmware. - */ - -/* General Constant definitions */ - -#define MAX_CHAN 64 /* max number of channels per board */ - -/* firmware id structure (set after boot) */ - -#define ID_ADDRESS 0x00000180L /* signature/pointer address */ -#define ZFIRM_ID 0x5557465AL /* ZFIRM/U signature */ -#define ZFIRM_HLT 0x59505B5CL /* ZFIRM needs external power supply */ -#define ZFIRM_RST 0x56040674L /* RST signal (due to FW reset) */ - -#define ZF_TINACT_DEF 1000 /* default inactivity timeout - (1000 ms) */ -#define ZF_TINACT ZF_TINACT_DEF - -struct FIRM_ID { - __u32 signature; /* ZFIRM/U signature */ - __u32 zfwctrl_addr; /* pointer to ZFW_CTRL structure */ -}; - -/* Op. System id */ - -#define C_OS_LINUX 0x00000030 /* generic Linux system */ - -/* channel op_mode */ - -#define C_CH_DISABLE 0x00000000 /* channel is disabled */ -#define C_CH_TXENABLE 0x00000001 /* channel Tx enabled */ -#define C_CH_RXENABLE 0x00000002 /* channel Rx enabled */ -#define C_CH_ENABLE 0x00000003 /* channel Tx/Rx enabled */ -#define C_CH_LOOPBACK 0x00000004 /* Loopback mode */ - -/* comm_parity - parity */ - -#define C_PR_NONE 0x00000000 /* None */ -#define C_PR_ODD 0x00000001 /* Odd */ -#define C_PR_EVEN 0x00000002 /* Even */ -#define C_PR_MARK 0x00000004 /* Mark */ -#define C_PR_SPACE 0x00000008 /* Space */ -#define C_PR_PARITY 0x000000ff - -#define C_PR_DISCARD 0x00000100 /* discard char with frame/par error */ -#define C_PR_IGNORE 0x00000200 /* ignore frame/par error */ - -/* comm_data_l - data length and stop bits */ - -#define C_DL_CS5 0x00000001 -#define C_DL_CS6 0x00000002 -#define C_DL_CS7 0x00000004 -#define C_DL_CS8 0x00000008 -#define C_DL_CS 0x0000000f -#define C_DL_1STOP 0x00000010 -#define C_DL_15STOP 0x00000020 -#define C_DL_2STOP 0x00000040 -#define C_DL_STOP 0x000000f0 - -/* interrupt enabling/status */ - -#define C_IN_DISABLE 0x00000000 /* zero, disable interrupts */ -#define C_IN_TXBEMPTY 0x00000001 /* tx buffer empty */ -#define C_IN_TXLOWWM 0x00000002 /* tx buffer below LWM */ -#define C_IN_RXHIWM 0x00000010 /* rx buffer above HWM */ -#define C_IN_RXNNDT 0x00000020 /* rx no new data timeout */ -#define C_IN_MDCD 0x00000100 /* modem DCD change */ -#define C_IN_MDSR 0x00000200 /* modem DSR change */ -#define C_IN_MRI 0x00000400 /* modem RI change */ -#define C_IN_MCTS 0x00000800 /* modem CTS change */ -#define C_IN_RXBRK 0x00001000 /* Break received */ -#define C_IN_PR_ERROR 0x00002000 /* parity error */ -#define C_IN_FR_ERROR 0x00004000 /* frame error */ -#define C_IN_OVR_ERROR 0x00008000 /* overrun error */ -#define C_IN_RXOFL 0x00010000 /* RX buffer overflow */ -#define C_IN_IOCTLW 0x00020000 /* I/O control w/ wait */ -#define C_IN_MRTS 0x00040000 /* modem RTS drop */ -#define C_IN_ICHAR 0x00080000 - -/* flow control */ - -#define C_FL_OXX 0x00000001 /* output Xon/Xoff flow control */ -#define C_FL_IXX 0x00000002 /* output Xon/Xoff flow control */ -#define C_FL_OIXANY 0x00000004 /* output Xon/Xoff (any xon) */ -#define C_FL_SWFLOW 0x0000000f - -/* flow status */ - -#define C_FS_TXIDLE 0x00000000 /* no Tx data in the buffer or UART */ -#define C_FS_SENDING 0x00000001 /* UART is sending data */ -#define C_FS_SWFLOW 0x00000002 /* Tx is stopped by received Xoff */ - -/* rs_control/rs_status RS-232 signals */ - -#define C_RS_PARAM 0x80000000 /* Indicates presence of parameter in - IOCTLM command */ -#define C_RS_RTS 0x00000001 /* RTS */ -#define C_RS_DTR 0x00000004 /* DTR */ -#define C_RS_DCD 0x00000100 /* CD */ -#define C_RS_DSR 0x00000200 /* DSR */ -#define C_RS_RI 0x00000400 /* RI */ -#define C_RS_CTS 0x00000800 /* CTS */ - -/* commands Host <-> Board */ - -#define C_CM_RESET 0x01 /* reset/flush buffers */ -#define C_CM_IOCTL 0x02 /* re-read CH_CTRL */ -#define C_CM_IOCTLW 0x03 /* re-read CH_CTRL, intr when done */ -#define C_CM_IOCTLM 0x04 /* RS-232 outputs change */ -#define C_CM_SENDXOFF 0x10 /* send Xoff */ -#define C_CM_SENDXON 0x11 /* send Xon */ -#define C_CM_CLFLOW 0x12 /* Clear flow control (resume) */ -#define C_CM_SENDBRK 0x41 /* send break */ -#define C_CM_INTBACK 0x42 /* Interrupt back */ -#define C_CM_SET_BREAK 0x43 /* Tx break on */ -#define C_CM_CLR_BREAK 0x44 /* Tx break off */ -#define C_CM_CMD_DONE 0x45 /* Previous command done */ -#define C_CM_INTBACK2 0x46 /* Alternate Interrupt back */ -#define C_CM_TINACT 0x51 /* set inactivity detection */ -#define C_CM_IRQ_ENBL 0x52 /* enable generation of interrupts */ -#define C_CM_IRQ_DSBL 0x53 /* disable generation of interrupts */ -#define C_CM_ACK_ENBL 0x54 /* enable acknowledged interrupt mode */ -#define C_CM_ACK_DSBL 0x55 /* disable acknowledged intr mode */ -#define C_CM_FLUSH_RX 0x56 /* flushes Rx buffer */ -#define C_CM_FLUSH_TX 0x57 /* flushes Tx buffer */ -#define C_CM_Q_ENABLE 0x58 /* enables queue access from the - driver */ -#define C_CM_Q_DISABLE 0x59 /* disables queue access from the - driver */ - -#define C_CM_TXBEMPTY 0x60 /* Tx buffer is empty */ -#define C_CM_TXLOWWM 0x61 /* Tx buffer low water mark */ -#define C_CM_RXHIWM 0x62 /* Rx buffer high water mark */ -#define C_CM_RXNNDT 0x63 /* rx no new data timeout */ -#define C_CM_TXFEMPTY 0x64 -#define C_CM_ICHAR 0x65 -#define C_CM_MDCD 0x70 /* modem DCD change */ -#define C_CM_MDSR 0x71 /* modem DSR change */ -#define C_CM_MRI 0x72 /* modem RI change */ -#define C_CM_MCTS 0x73 /* modem CTS change */ -#define C_CM_MRTS 0x74 /* modem RTS drop */ -#define C_CM_RXBRK 0x84 /* Break received */ -#define C_CM_PR_ERROR 0x85 /* Parity error */ -#define C_CM_FR_ERROR 0x86 /* Frame error */ -#define C_CM_OVR_ERROR 0x87 /* Overrun error */ -#define C_CM_RXOFL 0x88 /* RX buffer overflow */ -#define C_CM_CMDERROR 0x90 /* command error */ -#define C_CM_FATAL 0x91 /* fatal error */ -#define C_CM_HW_RESET 0x92 /* reset board */ - -/* - * CH_CTRL - This per port structure contains all parameters - * that control an specific port. It can be seen as the - * configuration registers of a "super-serial-controller". - */ - -struct CH_CTRL { - __u32 op_mode; /* operation mode */ - __u32 intr_enable; /* interrupt masking */ - __u32 sw_flow; /* SW flow control */ - __u32 flow_status; /* output flow status */ - __u32 comm_baud; /* baud rate - numerically specified */ - __u32 comm_parity; /* parity */ - __u32 comm_data_l; /* data length/stop */ - __u32 comm_flags; /* other flags */ - __u32 hw_flow; /* HW flow control */ - __u32 rs_control; /* RS-232 outputs */ - __u32 rs_status; /* RS-232 inputs */ - __u32 flow_xon; /* xon char */ - __u32 flow_xoff; /* xoff char */ - __u32 hw_overflow; /* hw overflow counter */ - __u32 sw_overflow; /* sw overflow counter */ - __u32 comm_error; /* frame/parity error counter */ - __u32 ichar; - __u32 filler[7]; -}; - - -/* - * BUF_CTRL - This per channel structure contains - * all Tx and Rx buffer control for a given channel. - */ - -struct BUF_CTRL { - __u32 flag_dma; /* buffers are in Host memory */ - __u32 tx_bufaddr; /* address of the tx buffer */ - __u32 tx_bufsize; /* tx buffer size */ - __u32 tx_threshold; /* tx low water mark */ - __u32 tx_get; /* tail index tx buf */ - __u32 tx_put; /* head index tx buf */ - __u32 rx_bufaddr; /* address of the rx buffer */ - __u32 rx_bufsize; /* rx buffer size */ - __u32 rx_threshold; /* rx high water mark */ - __u32 rx_get; /* tail index rx buf */ - __u32 rx_put; /* head index rx buf */ - __u32 filler[5]; /* filler to align structures */ -}; - -/* - * BOARD_CTRL - This per board structure contains all global - * control fields related to the board. - */ - -struct BOARD_CTRL { - - /* static info provided by the on-board CPU */ - __u32 n_channel; /* number of channels */ - __u32 fw_version; /* firmware version */ - - /* static info provided by the driver */ - __u32 op_system; /* op_system id */ - __u32 dr_version; /* driver version */ - - /* board control area */ - __u32 inactivity; /* inactivity control */ - - /* host to FW commands */ - __u32 hcmd_channel; /* channel number */ - __u32 hcmd_param; /* pointer to parameters */ - - /* FW to Host commands */ - __u32 fwcmd_channel; /* channel number */ - __u32 fwcmd_param; /* pointer to parameters */ - __u32 zf_int_queue_addr; /* offset for INT_QUEUE structure */ - - /* filler so the structures are aligned */ - __u32 filler[6]; -}; - -/* Host Interrupt Queue */ - -#define QUEUE_SIZE (10*MAX_CHAN) - -struct INT_QUEUE { - unsigned char intr_code[QUEUE_SIZE]; - unsigned long channel[QUEUE_SIZE]; - unsigned long param[QUEUE_SIZE]; - unsigned long put; - unsigned long get; -}; - -/* - * ZFW_CTRL - This is the data structure that includes all other - * data structures used by the Firmware. - */ - -struct ZFW_CTRL { - struct BOARD_CTRL board_ctrl; - struct CH_CTRL ch_ctrl[MAX_CHAN]; - struct BUF_CTRL buf_ctrl[MAX_CHAN]; -}; - -/****************** ****************** *******************/ -#endif +#include <uapi/linux/cyclades.h> -#ifdef __KERNEL__ /* Per card data structure */ struct cyclades_card { @@ -780,5 +357,4 @@ struct cyclades_port { /***************************************************************************/ -#endif /* __KERNEL__ */ #endif /* _LINUX_CYCLADES_H */ diff --git a/include/linux/dccp.h b/include/linux/dccp.h index d16294e2a11..439ff698000 100644 --- a/include/linux/dccp.h +++ b/include/linux/dccp.h @@ -1,239 +1,6 @@ #ifndef _LINUX_DCCP_H #define _LINUX_DCCP_H -#include <linux/types.h> -#include <asm/byteorder.h> - -/** - * struct dccp_hdr - generic part of DCCP packet header - * - * @dccph_sport - Relevant port on the endpoint that sent this packet - * @dccph_dport - Relevant port on the other endpoint - * @dccph_doff - Data Offset from the start of the DCCP header, in 32-bit words - * @dccph_ccval - Used by the HC-Sender CCID - * @dccph_cscov - Parts of the packet that are covered by the Checksum field - * @dccph_checksum - Internet checksum, depends on dccph_cscov - * @dccph_x - 0 = 24 bit sequence number, 1 = 48 - * @dccph_type - packet type, see DCCP_PKT_ prefixed macros - * @dccph_seq - sequence number high or low order 24 bits, depends on dccph_x - */ -struct dccp_hdr { - __be16 dccph_sport, - dccph_dport; - __u8 dccph_doff; -#if defined(__LITTLE_ENDIAN_BITFIELD) - __u8 dccph_cscov:4, - dccph_ccval:4; -#elif defined(__BIG_ENDIAN_BITFIELD) - __u8 dccph_ccval:4, - dccph_cscov:4; -#else -#error "Adjust your <asm/byteorder.h> defines" -#endif - __sum16 dccph_checksum; -#if defined(__LITTLE_ENDIAN_BITFIELD) - __u8 dccph_x:1, - dccph_type:4, - dccph_reserved:3; -#elif defined(__BIG_ENDIAN_BITFIELD) - __u8 dccph_reserved:3, - dccph_type:4, - dccph_x:1; -#else -#error "Adjust your <asm/byteorder.h> defines" -#endif - __u8 dccph_seq2; - __be16 dccph_seq; -}; - -/** - * struct dccp_hdr_ext - the low bits of a 48 bit seq packet - * - * @dccph_seq_low - low 24 bits of a 48 bit seq packet - */ -struct dccp_hdr_ext { - __be32 dccph_seq_low; -}; - -/** - * struct dccp_hdr_request - Connection initiation request header - * - * @dccph_req_service - Service to which the client app wants to connect - */ -struct dccp_hdr_request { - __be32 dccph_req_service; -}; -/** - * struct dccp_hdr_ack_bits - acknowledgment bits common to most packets - * - * @dccph_resp_ack_nr_high - 48 bit ack number high order bits, contains GSR - * @dccph_resp_ack_nr_low - 48 bit ack number low order bits, contains GSR - */ -struct dccp_hdr_ack_bits { - __be16 dccph_reserved1; - __be16 dccph_ack_nr_high; - __be32 dccph_ack_nr_low; -}; -/** - * struct dccp_hdr_response - Connection initiation response header - * - * @dccph_resp_ack - 48 bit Acknowledgment Number Subheader (5.3) - * @dccph_resp_service - Echoes the Service Code on a received DCCP-Request - */ -struct dccp_hdr_response { - struct dccp_hdr_ack_bits dccph_resp_ack; - __be32 dccph_resp_service; -}; - -/** - * struct dccp_hdr_reset - Unconditionally shut down a connection - * - * @dccph_reset_ack - 48 bit Acknowledgment Number Subheader (5.6) - * @dccph_reset_code - one of %dccp_reset_codes - * @dccph_reset_data - the Data 1 ... Data 3 fields from 5.6 - */ -struct dccp_hdr_reset { - struct dccp_hdr_ack_bits dccph_reset_ack; - __u8 dccph_reset_code, - dccph_reset_data[3]; -}; - -enum dccp_pkt_type { - DCCP_PKT_REQUEST = 0, - DCCP_PKT_RESPONSE, - DCCP_PKT_DATA, - DCCP_PKT_ACK, - DCCP_PKT_DATAACK, - DCCP_PKT_CLOSEREQ, - DCCP_PKT_CLOSE, - DCCP_PKT_RESET, - DCCP_PKT_SYNC, - DCCP_PKT_SYNCACK, - DCCP_PKT_INVALID, -}; - -#define DCCP_NR_PKT_TYPES DCCP_PKT_INVALID - -static inline unsigned int dccp_packet_hdr_len(const __u8 type) -{ - if (type == DCCP_PKT_DATA) - return 0; - if (type == DCCP_PKT_DATAACK || - type == DCCP_PKT_ACK || - type == DCCP_PKT_SYNC || - type == DCCP_PKT_SYNCACK || - type == DCCP_PKT_CLOSE || - type == DCCP_PKT_CLOSEREQ) - return sizeof(struct dccp_hdr_ack_bits); - if (type == DCCP_PKT_REQUEST) - return sizeof(struct dccp_hdr_request); - if (type == DCCP_PKT_RESPONSE) - return sizeof(struct dccp_hdr_response); - return sizeof(struct dccp_hdr_reset); -} -enum dccp_reset_codes { - DCCP_RESET_CODE_UNSPECIFIED = 0, - DCCP_RESET_CODE_CLOSED, - DCCP_RESET_CODE_ABORTED, - DCCP_RESET_CODE_NO_CONNECTION, - DCCP_RESET_CODE_PACKET_ERROR, - DCCP_RESET_CODE_OPTION_ERROR, - DCCP_RESET_CODE_MANDATORY_ERROR, - DCCP_RESET_CODE_CONNECTION_REFUSED, - DCCP_RESET_CODE_BAD_SERVICE_CODE, - DCCP_RESET_CODE_TOO_BUSY, - DCCP_RESET_CODE_BAD_INIT_COOKIE, - DCCP_RESET_CODE_AGGRESSION_PENALTY, - - DCCP_MAX_RESET_CODES /* Leave at the end! */ -}; - -/* DCCP options */ -enum { - DCCPO_PADDING = 0, - DCCPO_MANDATORY = 1, - DCCPO_MIN_RESERVED = 3, - DCCPO_MAX_RESERVED = 31, - DCCPO_CHANGE_L = 32, - DCCPO_CONFIRM_L = 33, - DCCPO_CHANGE_R = 34, - DCCPO_CONFIRM_R = 35, - DCCPO_NDP_COUNT = 37, - DCCPO_ACK_VECTOR_0 = 38, - DCCPO_ACK_VECTOR_1 = 39, - DCCPO_TIMESTAMP = 41, - DCCPO_TIMESTAMP_ECHO = 42, - DCCPO_ELAPSED_TIME = 43, - DCCPO_MAX = 45, - DCCPO_MIN_RX_CCID_SPECIFIC = 128, /* from sender to receiver */ - DCCPO_MAX_RX_CCID_SPECIFIC = 191, - DCCPO_MIN_TX_CCID_SPECIFIC = 192, /* from receiver to sender */ - DCCPO_MAX_TX_CCID_SPECIFIC = 255, -}; -/* maximum size of a single TLV-encoded DCCP option (sans type/len bytes) */ -#define DCCP_SINGLE_OPT_MAXLEN 253 - -/* DCCP CCIDS */ -enum { - DCCPC_CCID2 = 2, - DCCPC_CCID3 = 3, -}; - -/* DCCP features (RFC 4340 section 6.4) */ -enum dccp_feature_numbers { - DCCPF_RESERVED = 0, - DCCPF_CCID = 1, - DCCPF_SHORT_SEQNOS = 2, - DCCPF_SEQUENCE_WINDOW = 3, - DCCPF_ECN_INCAPABLE = 4, - DCCPF_ACK_RATIO = 5, - DCCPF_SEND_ACK_VECTOR = 6, - DCCPF_SEND_NDP_COUNT = 7, - DCCPF_MIN_CSUM_COVER = 8, - DCCPF_DATA_CHECKSUM = 9, - /* 10-127 reserved */ - DCCPF_MIN_CCID_SPECIFIC = 128, - DCCPF_SEND_LEV_RATE = 192, /* RFC 4342, sec. 8.4 */ - DCCPF_MAX_CCID_SPECIFIC = 255, -}; - -/* DCCP socket control message types for cmsg */ -enum dccp_cmsg_type { - DCCP_SCM_PRIORITY = 1, - DCCP_SCM_QPOLICY_MAX = 0xFFFF, - /* ^-- Up to here reserved exclusively for qpolicy parameters */ - DCCP_SCM_MAX -}; - -/* DCCP priorities for outgoing/queued packets */ -enum dccp_packet_dequeueing_policy { - DCCPQ_POLICY_SIMPLE, - DCCPQ_POLICY_PRIO, - DCCPQ_POLICY_MAX -}; - -/* DCCP socket options */ -#define DCCP_SOCKOPT_PACKET_SIZE 1 /* XXX deprecated, without effect */ -#define DCCP_SOCKOPT_SERVICE 2 -#define DCCP_SOCKOPT_CHANGE_L 3 -#define DCCP_SOCKOPT_CHANGE_R 4 -#define DCCP_SOCKOPT_GET_CUR_MPS 5 -#define DCCP_SOCKOPT_SERVER_TIMEWAIT 6 -#define DCCP_SOCKOPT_SEND_CSCOV 10 -#define DCCP_SOCKOPT_RECV_CSCOV 11 -#define DCCP_SOCKOPT_AVAILABLE_CCIDS 12 -#define DCCP_SOCKOPT_CCID 13 -#define DCCP_SOCKOPT_TX_CCID 14 -#define DCCP_SOCKOPT_RX_CCID 15 -#define DCCP_SOCKOPT_QPOLICY_ID 16 -#define DCCP_SOCKOPT_QPOLICY_TXQLEN 17 -#define DCCP_SOCKOPT_CCID_RX_INFO 128 -#define DCCP_SOCKOPT_CCID_TX_INFO 192 - -/* maximum number of services provided on the same listening port */ -#define DCCP_SERVICE_LIST_MAX_LEN 32 - -#ifdef __KERNEL__ #include <linux/in.h> #include <linux/interrupt.h> @@ -246,6 +13,7 @@ enum dccp_packet_dequeueing_policy { #include <net/inet_sock.h> #include <net/inet_timewait_sock.h> #include <net/tcp_states.h> +#include <uapi/linux/dccp.h> enum dccp_state { DCCP_OPEN = TCP_ESTABLISHED, @@ -551,6 +319,4 @@ static inline const char *dccp_role(const struct sock *sk) extern void dccp_syn_ack_timeout(struct sock *sk, struct request_sock *req); -#endif /* __KERNEL__ */ - #endif /* _LINUX_DCCP_H */ diff --git a/include/linux/dlm.h b/include/linux/dlm.h index 520152411cd..1d47dcce11e 100644 --- a/include/linux/dlm.h +++ b/include/linux/dlm.h @@ -10,68 +10,11 @@ ** ******************************************************************************* ******************************************************************************/ - #ifndef __DLM_DOT_H__ #define __DLM_DOT_H__ -/* - * Interface to Distributed Lock Manager (DLM) - * routines and structures to use DLM lockspaces - */ - -/* Lock levels and flags are here */ -#include <linux/dlmconstants.h> -#include <linux/types.h> - -typedef void dlm_lockspace_t; - -/* - * Lock status block - * - * Use this structure to specify the contents of the lock value block. For a - * conversion request, this structure is used to specify the lock ID of the - * lock. DLM writes the status of the lock request and the lock ID assigned - * to the request in the lock status block. - * - * sb_lkid: the returned lock ID. It is set on new (non-conversion) requests. - * It is available when dlm_lock returns. - * - * sb_lvbptr: saves or returns the contents of the lock's LVB according to rules - * shown for the DLM_LKF_VALBLK flag. - * - * sb_flags: DLM_SBF_DEMOTED is returned if in the process of promoting a lock, - * it was first demoted to NL to avoid conversion deadlock. - * DLM_SBF_VALNOTVALID is returned if the resource's LVB is marked invalid. - * - * sb_status: the returned status of the lock request set prior to AST - * execution. Possible return values: - * - * 0 if lock request was successful - * -EAGAIN if request would block and is flagged DLM_LKF_NOQUEUE - * -DLM_EUNLOCK if unlock request was successful - * -DLM_ECANCEL if a cancel completed successfully - * -EDEADLK if a deadlock was detected - * -ETIMEDOUT if the lock request was canceled due to a timeout - */ - -#define DLM_SBF_DEMOTED 0x01 -#define DLM_SBF_VALNOTVALID 0x02 -#define DLM_SBF_ALTMODE 0x04 +#include <uapi/linux/dlm.h> -struct dlm_lksb { - int sb_status; - __u32 sb_lkid; - char sb_flags; - char * sb_lvbptr; -}; - -/* dlm_new_lockspace() flags */ - -#define DLM_LSFL_TIMEWARN 0x00000002 -#define DLM_LSFL_FS 0x00000004 -#define DLM_LSFL_NEWEXCL 0x00000008 - -#ifdef __KERNEL__ struct dlm_slot { int nodeid; /* 1 to MAX_INT */ @@ -226,7 +169,4 @@ int dlm_unlock(dlm_lockspace_t *lockspace, struct dlm_lksb *lksb, void *astarg); -#endif /* __KERNEL__ */ - #endif /* __DLM_DOT_H__ */ - diff --git a/include/linux/dlm_plock.h b/include/linux/dlm_plock.h index 3b1cc1be419..95ad387a776 100644 --- a/include/linux/dlm_plock.h +++ b/include/linux/dlm_plock.h @@ -5,50 +5,15 @@ * modify, copy, or redistribute it subject to the terms and conditions * of the GNU General Public License v.2. */ - #ifndef __DLM_PLOCK_DOT_H__ #define __DLM_PLOCK_DOT_H__ -#include <linux/types.h> - -#define DLM_PLOCK_MISC_NAME "dlm_plock" - -#define DLM_PLOCK_VERSION_MAJOR 1 -#define DLM_PLOCK_VERSION_MINOR 2 -#define DLM_PLOCK_VERSION_PATCH 0 - -enum { - DLM_PLOCK_OP_LOCK = 1, - DLM_PLOCK_OP_UNLOCK, - DLM_PLOCK_OP_GET, -}; +#include <uapi/linux/dlm_plock.h> -#define DLM_PLOCK_FL_CLOSE 1 - -struct dlm_plock_info { - __u32 version[3]; - __u8 optype; - __u8 ex; - __u8 wait; - __u8 flags; - __u32 pid; - __s32 nodeid; - __s32 rv; - __u32 fsid; - __u64 number; - __u64 start; - __u64 end; - __u64 owner; -}; - -#ifdef __KERNEL__ int dlm_posix_lock(dlm_lockspace_t *lockspace, u64 number, struct file *file, int cmd, struct file_lock *fl); int dlm_posix_unlock(dlm_lockspace_t *lockspace, u64 number, struct file *file, struct file_lock *fl); int dlm_posix_get(dlm_lockspace_t *lockspace, u64 number, struct file *file, struct file_lock *fl); -#endif /* __KERNEL__ */ - #endif - diff --git a/include/linux/dvb/version.h b/include/linux/dvb/version.h index 20e5eac2ffd..827cce7e33e 100644 --- a/include/linux/dvb/version.h +++ b/include/linux/dvb/version.h @@ -24,6 +24,6 @@ #define _DVBVERSION_H_ #define DVB_API_VERSION 5 -#define DVB_API_VERSION_MINOR 8 +#define DVB_API_VERSION_MINOR 9 #endif /*_DVBVERSION_H_*/ diff --git a/include/linux/edd.h b/include/linux/edd.h index 4cbd0fe9df0..83d4371ec99 100644 --- a/include/linux/edd.h +++ b/include/linux/edd.h @@ -30,165 +30,9 @@ #ifndef _LINUX_EDD_H #define _LINUX_EDD_H -#include <linux/types.h> - -#define EDDNR 0x1e9 /* addr of number of edd_info structs at EDDBUF - in boot_params - treat this as 1 byte */ -#define EDDBUF 0xd00 /* addr of edd_info structs in boot_params */ -#define EDDMAXNR 6 /* number of edd_info structs starting at EDDBUF */ -#define EDDEXTSIZE 8 /* change these if you muck with the structures */ -#define EDDPARMSIZE 74 -#define CHECKEXTENSIONSPRESENT 0x41 -#define GETDEVICEPARAMETERS 0x48 -#define LEGACYGETDEVICEPARAMETERS 0x08 -#define EDDMAGIC1 0x55AA -#define EDDMAGIC2 0xAA55 - - -#define READ_SECTORS 0x02 /* int13 AH=0x02 is READ_SECTORS command */ -#define EDD_MBR_SIG_OFFSET 0x1B8 /* offset of signature in the MBR */ -#define EDD_MBR_SIG_BUF 0x290 /* addr in boot params */ -#define EDD_MBR_SIG_MAX 16 /* max number of signatures to store */ -#define EDD_MBR_SIG_NR_BUF 0x1ea /* addr of number of MBR signtaures at EDD_MBR_SIG_BUF - in boot_params - treat this as 1 byte */ +#include <uapi/linux/edd.h> #ifndef __ASSEMBLY__ - -#define EDD_EXT_FIXED_DISK_ACCESS (1 << 0) -#define EDD_EXT_DEVICE_LOCKING_AND_EJECTING (1 << 1) -#define EDD_EXT_ENHANCED_DISK_DRIVE_SUPPORT (1 << 2) -#define EDD_EXT_64BIT_EXTENSIONS (1 << 3) - -#define EDD_INFO_DMA_BOUNDARY_ERROR_TRANSPARENT (1 << 0) -#define EDD_INFO_GEOMETRY_VALID (1 << 1) -#define EDD_INFO_REMOVABLE (1 << 2) -#define EDD_INFO_WRITE_VERIFY (1 << 3) -#define EDD_INFO_MEDIA_CHANGE_NOTIFICATION (1 << 4) -#define EDD_INFO_LOCKABLE (1 << 5) -#define EDD_INFO_NO_MEDIA_PRESENT (1 << 6) -#define EDD_INFO_USE_INT13_FN50 (1 << 7) - -struct edd_device_params { - __u16 length; - __u16 info_flags; - __u32 num_default_cylinders; - __u32 num_default_heads; - __u32 sectors_per_track; - __u64 number_of_sectors; - __u16 bytes_per_sector; - __u32 dpte_ptr; /* 0xFFFFFFFF for our purposes */ - __u16 key; /* = 0xBEDD */ - __u8 device_path_info_length; /* = 44 */ - __u8 reserved2; - __u16 reserved3; - __u8 host_bus_type[4]; - __u8 interface_type[8]; - union { - struct { - __u16 base_address; - __u16 reserved1; - __u32 reserved2; - } __attribute__ ((packed)) isa; - struct { - __u8 bus; - __u8 slot; - __u8 function; - __u8 channel; - __u32 reserved; - } __attribute__ ((packed)) pci; - /* pcix is same as pci */ - struct { - __u64 reserved; - } __attribute__ ((packed)) ibnd; - struct { - __u64 reserved; - } __attribute__ ((packed)) xprs; - struct { - __u64 reserved; - } __attribute__ ((packed)) htpt; - struct { - __u64 reserved; - } __attribute__ ((packed)) unknown; - } interface_path; - union { - struct { - __u8 device; - __u8 reserved1; - __u16 reserved2; - __u32 reserved3; - __u64 reserved4; - } __attribute__ ((packed)) ata; - struct { - __u8 device; - __u8 lun; - __u8 reserved1; - __u8 reserved2; - __u32 reserved3; - __u64 reserved4; - } __attribute__ ((packed)) atapi; - struct { - __u16 id; - __u64 lun; - __u16 reserved1; - __u32 reserved2; - } __attribute__ ((packed)) scsi; - struct { - __u64 serial_number; - __u64 reserved; - } __attribute__ ((packed)) usb; - struct { - __u64 eui; - __u64 reserved; - } __attribute__ ((packed)) i1394; - struct { - __u64 wwid; - __u64 lun; - } __attribute__ ((packed)) fibre; - struct { - __u64 identity_tag; - __u64 reserved; - } __attribute__ ((packed)) i2o; - struct { - __u32 array_number; - __u32 reserved1; - __u64 reserved2; - } __attribute__ ((packed)) raid; - struct { - __u8 device; - __u8 reserved1; - __u16 reserved2; - __u32 reserved3; - __u64 reserved4; - } __attribute__ ((packed)) sata; - struct { - __u64 reserved1; - __u64 reserved2; - } __attribute__ ((packed)) unknown; - } device_path; - __u8 reserved4; - __u8 checksum; -} __attribute__ ((packed)); - -struct edd_info { - __u8 device; - __u8 version; - __u16 interface_support; - __u16 legacy_max_cylinder; - __u8 legacy_max_head; - __u8 legacy_sectors_per_track; - struct edd_device_params params; -} __attribute__ ((packed)); - -struct edd { - unsigned int mbr_signature[EDD_MBR_SIG_MAX]; - struct edd_info edd_info[EDDMAXNR]; - unsigned char mbr_signature_nr; - unsigned char edd_info_nr; -}; - -#ifdef __KERNEL__ extern struct edd edd; -#endif /* __KERNEL__ */ #endif /*!__ASSEMBLY__ */ - #endif /* _LINUX_EDD_H */ diff --git a/include/linux/elf.h b/include/linux/elf.h index 59ef40650e1..8c9048e3346 100644 --- a/include/linux/elf.h +++ b/include/linux/elf.h @@ -1,420 +1,9 @@ #ifndef _LINUX_ELF_H #define _LINUX_ELF_H -#include <linux/types.h> -#include <linux/elf-em.h> -#ifdef __KERNEL__ #include <asm/elf.h> -#endif - -/* 32-bit ELF base types. */ -typedef __u32 Elf32_Addr; -typedef __u16 Elf32_Half; -typedef __u32 Elf32_Off; -typedef __s32 Elf32_Sword; -typedef __u32 Elf32_Word; - -/* 64-bit ELF base types. */ -typedef __u64 Elf64_Addr; -typedef __u16 Elf64_Half; -typedef __s16 Elf64_SHalf; -typedef __u64 Elf64_Off; -typedef __s32 Elf64_Sword; -typedef __u32 Elf64_Word; -typedef __u64 Elf64_Xword; -typedef __s64 Elf64_Sxword; - -/* These constants are for the segment types stored in the image headers */ -#define PT_NULL 0 -#define PT_LOAD 1 -#define PT_DYNAMIC 2 -#define PT_INTERP 3 -#define PT_NOTE 4 -#define PT_SHLIB 5 -#define PT_PHDR 6 -#define PT_TLS 7 /* Thread local storage segment */ -#define PT_LOOS 0x60000000 /* OS-specific */ -#define PT_HIOS 0x6fffffff /* OS-specific */ -#define PT_LOPROC 0x70000000 -#define PT_HIPROC 0x7fffffff -#define PT_GNU_EH_FRAME 0x6474e550 - -#define PT_GNU_STACK (PT_LOOS + 0x474e551) - -/* - * Extended Numbering - * - * If the real number of program header table entries is larger than - * or equal to PN_XNUM(0xffff), it is set to sh_info field of the - * section header at index 0, and PN_XNUM is set to e_phnum - * field. Otherwise, the section header at index 0 is zero - * initialized, if it exists. - * - * Specifications are available in: - * - * - Sun microsystems: Linker and Libraries. - * Part No: 817-1984-17, September 2008. - * URL: http://docs.sun.com/app/docs/doc/817-1984 - * - * - System V ABI AMD64 Architecture Processor Supplement - * Draft Version 0.99., - * May 11, 2009. - * URL: http://www.x86-64.org/ - */ -#define PN_XNUM 0xffff - -/* These constants define the different elf file types */ -#define ET_NONE 0 -#define ET_REL 1 -#define ET_EXEC 2 -#define ET_DYN 3 -#define ET_CORE 4 -#define ET_LOPROC 0xff00 -#define ET_HIPROC 0xffff - -/* This is the info that is needed to parse the dynamic section of the file */ -#define DT_NULL 0 -#define DT_NEEDED 1 -#define DT_PLTRELSZ 2 -#define DT_PLTGOT 3 -#define DT_HASH 4 -#define DT_STRTAB 5 -#define DT_SYMTAB 6 -#define DT_RELA 7 -#define DT_RELASZ 8 -#define DT_RELAENT 9 -#define DT_STRSZ 10 -#define DT_SYMENT 11 -#define DT_INIT 12 -#define DT_FINI 13 -#define DT_SONAME 14 -#define DT_RPATH 15 -#define DT_SYMBOLIC 16 -#define DT_REL 17 -#define DT_RELSZ 18 -#define DT_RELENT 19 -#define DT_PLTREL 20 -#define DT_DEBUG 21 -#define DT_TEXTREL 22 -#define DT_JMPREL 23 -#define DT_ENCODING 32 -#define OLD_DT_LOOS 0x60000000 -#define DT_LOOS 0x6000000d -#define DT_HIOS 0x6ffff000 -#define DT_VALRNGLO 0x6ffffd00 -#define DT_VALRNGHI 0x6ffffdff -#define DT_ADDRRNGLO 0x6ffffe00 -#define DT_ADDRRNGHI 0x6ffffeff -#define DT_VERSYM 0x6ffffff0 -#define DT_RELACOUNT 0x6ffffff9 -#define DT_RELCOUNT 0x6ffffffa -#define DT_FLAGS_1 0x6ffffffb -#define DT_VERDEF 0x6ffffffc -#define DT_VERDEFNUM 0x6ffffffd -#define DT_VERNEED 0x6ffffffe -#define DT_VERNEEDNUM 0x6fffffff -#define OLD_DT_HIOS 0x6fffffff -#define DT_LOPROC 0x70000000 -#define DT_HIPROC 0x7fffffff - -/* This info is needed when parsing the symbol table */ -#define STB_LOCAL 0 -#define STB_GLOBAL 1 -#define STB_WEAK 2 - -#define STT_NOTYPE 0 -#define STT_OBJECT 1 -#define STT_FUNC 2 -#define STT_SECTION 3 -#define STT_FILE 4 -#define STT_COMMON 5 -#define STT_TLS 6 - -#define ELF_ST_BIND(x) ((x) >> 4) -#define ELF_ST_TYPE(x) (((unsigned int) x) & 0xf) -#define ELF32_ST_BIND(x) ELF_ST_BIND(x) -#define ELF32_ST_TYPE(x) ELF_ST_TYPE(x) -#define ELF64_ST_BIND(x) ELF_ST_BIND(x) -#define ELF64_ST_TYPE(x) ELF_ST_TYPE(x) - -typedef struct dynamic{ - Elf32_Sword d_tag; - union{ - Elf32_Sword d_val; - Elf32_Addr d_ptr; - } d_un; -} Elf32_Dyn; - -typedef struct { - Elf64_Sxword d_tag; /* entry tag value */ - union { - Elf64_Xword d_val; - Elf64_Addr d_ptr; - } d_un; -} Elf64_Dyn; - -/* The following are used with relocations */ -#define ELF32_R_SYM(x) ((x) >> 8) -#define ELF32_R_TYPE(x) ((x) & 0xff) - -#define ELF64_R_SYM(i) ((i) >> 32) -#define ELF64_R_TYPE(i) ((i) & 0xffffffff) - -typedef struct elf32_rel { - Elf32_Addr r_offset; - Elf32_Word r_info; -} Elf32_Rel; - -typedef struct elf64_rel { - Elf64_Addr r_offset; /* Location at which to apply the action */ - Elf64_Xword r_info; /* index and type of relocation */ -} Elf64_Rel; - -typedef struct elf32_rela{ - Elf32_Addr r_offset; - Elf32_Word r_info; - Elf32_Sword r_addend; -} Elf32_Rela; - -typedef struct elf64_rela { - Elf64_Addr r_offset; /* Location at which to apply the action */ - Elf64_Xword r_info; /* index and type of relocation */ - Elf64_Sxword r_addend; /* Constant addend used to compute value */ -} Elf64_Rela; - -typedef struct elf32_sym{ - Elf32_Word st_name; - Elf32_Addr st_value; - Elf32_Word st_size; - unsigned char st_info; - unsigned char st_other; - Elf32_Half st_shndx; -} Elf32_Sym; - -typedef struct elf64_sym { - Elf64_Word st_name; /* Symbol name, index in string tbl */ - unsigned char st_info; /* Type and binding attributes */ - unsigned char st_other; /* No defined meaning, 0 */ - Elf64_Half st_shndx; /* Associated section index */ - Elf64_Addr st_value; /* Value of the symbol */ - Elf64_Xword st_size; /* Associated symbol size */ -} Elf64_Sym; - - -#define EI_NIDENT 16 - -typedef struct elf32_hdr{ - unsigned char e_ident[EI_NIDENT]; - Elf32_Half e_type; - Elf32_Half e_machine; - Elf32_Word e_version; - Elf32_Addr e_entry; /* Entry point */ - Elf32_Off e_phoff; - Elf32_Off e_shoff; - Elf32_Word e_flags; - Elf32_Half e_ehsize; - Elf32_Half e_phentsize; - Elf32_Half e_phnum; - Elf32_Half e_shentsize; - Elf32_Half e_shnum; - Elf32_Half e_shstrndx; -} Elf32_Ehdr; - -typedef struct elf64_hdr { - unsigned char e_ident[EI_NIDENT]; /* ELF "magic number" */ - Elf64_Half e_type; - Elf64_Half e_machine; - Elf64_Word e_version; - Elf64_Addr e_entry; /* Entry point virtual address */ - Elf64_Off e_phoff; /* Program header table file offset */ - Elf64_Off e_shoff; /* Section header table file offset */ - Elf64_Word e_flags; - Elf64_Half e_ehsize; - Elf64_Half e_phentsize; - Elf64_Half e_phnum; - Elf64_Half e_shentsize; - Elf64_Half e_shnum; - Elf64_Half e_shstrndx; -} Elf64_Ehdr; - -/* These constants define the permissions on sections in the program - header, p_flags. */ -#define PF_R 0x4 -#define PF_W 0x2 -#define PF_X 0x1 - -typedef struct elf32_phdr{ - Elf32_Word p_type; - Elf32_Off p_offset; - Elf32_Addr p_vaddr; - Elf32_Addr p_paddr; - Elf32_Word p_filesz; - Elf32_Word p_memsz; - Elf32_Word p_flags; - Elf32_Word p_align; -} Elf32_Phdr; - -typedef struct elf64_phdr { - Elf64_Word p_type; - Elf64_Word p_flags; - Elf64_Off p_offset; /* Segment file offset */ - Elf64_Addr p_vaddr; /* Segment virtual address */ - Elf64_Addr p_paddr; /* Segment physical address */ - Elf64_Xword p_filesz; /* Segment size in file */ - Elf64_Xword p_memsz; /* Segment size in memory */ - Elf64_Xword p_align; /* Segment alignment, file & memory */ -} Elf64_Phdr; - -/* sh_type */ -#define SHT_NULL 0 -#define SHT_PROGBITS 1 -#define SHT_SYMTAB 2 -#define SHT_STRTAB 3 -#define SHT_RELA 4 -#define SHT_HASH 5 -#define SHT_DYNAMIC 6 -#define SHT_NOTE 7 -#define SHT_NOBITS 8 -#define SHT_REL 9 -#define SHT_SHLIB 10 -#define SHT_DYNSYM 11 -#define SHT_NUM 12 -#define SHT_LOPROC 0x70000000 -#define SHT_HIPROC 0x7fffffff -#define SHT_LOUSER 0x80000000 -#define SHT_HIUSER 0xffffffff - -/* sh_flags */ -#define SHF_WRITE 0x1 -#define SHF_ALLOC 0x2 -#define SHF_EXECINSTR 0x4 -#define SHF_MASKPROC 0xf0000000 - -/* special section indexes */ -#define SHN_UNDEF 0 -#define SHN_LORESERVE 0xff00 -#define SHN_LOPROC 0xff00 -#define SHN_HIPROC 0xff1f -#define SHN_ABS 0xfff1 -#define SHN_COMMON 0xfff2 -#define SHN_HIRESERVE 0xffff - -typedef struct elf32_shdr { - Elf32_Word sh_name; - Elf32_Word sh_type; - Elf32_Word sh_flags; - Elf32_Addr sh_addr; - Elf32_Off sh_offset; - Elf32_Word sh_size; - Elf32_Word sh_link; - Elf32_Word sh_info; - Elf32_Word sh_addralign; - Elf32_Word sh_entsize; -} Elf32_Shdr; - -typedef struct elf64_shdr { - Elf64_Word sh_name; /* Section name, index in string tbl */ - Elf64_Word sh_type; /* Type of section */ - Elf64_Xword sh_flags; /* Miscellaneous section attributes */ - Elf64_Addr sh_addr; /* Section virtual addr at execution */ - Elf64_Off sh_offset; /* Section file offset */ - Elf64_Xword sh_size; /* Size of section in bytes */ - Elf64_Word sh_link; /* Index of another section */ - Elf64_Word sh_info; /* Additional section information */ - Elf64_Xword sh_addralign; /* Section alignment */ - Elf64_Xword sh_entsize; /* Entry size if section holds table */ -} Elf64_Shdr; - -#define EI_MAG0 0 /* e_ident[] indexes */ -#define EI_MAG1 1 -#define EI_MAG2 2 -#define EI_MAG3 3 -#define EI_CLASS 4 -#define EI_DATA 5 -#define EI_VERSION 6 -#define EI_OSABI 7 -#define EI_PAD 8 - -#define ELFMAG0 0x7f /* EI_MAG */ -#define ELFMAG1 'E' -#define ELFMAG2 'L' -#define ELFMAG3 'F' -#define ELFMAG "\177ELF" -#define SELFMAG 4 - -#define ELFCLASSNONE 0 /* EI_CLASS */ -#define ELFCLASS32 1 -#define ELFCLASS64 2 -#define ELFCLASSNUM 3 - -#define ELFDATANONE 0 /* e_ident[EI_DATA] */ -#define ELFDATA2LSB 1 -#define ELFDATA2MSB 2 - -#define EV_NONE 0 /* e_version, EI_VERSION */ -#define EV_CURRENT 1 -#define EV_NUM 2 - -#define ELFOSABI_NONE 0 -#define ELFOSABI_LINUX 3 - -#ifndef ELF_OSABI -#define ELF_OSABI ELFOSABI_NONE -#endif - -/* - * Notes used in ET_CORE. Architectures export some of the arch register sets - * using the corresponding note types via the PTRACE_GETREGSET and - * PTRACE_SETREGSET requests. - */ -#define NT_PRSTATUS 1 -#define NT_PRFPREG 2 -#define NT_PRPSINFO 3 -#define NT_TASKSTRUCT 4 -#define NT_AUXV 6 -/* - * Note to userspace developers: size of NT_SIGINFO note may increase - * in the future to accomodate more fields, don't assume it is fixed! - */ -#define NT_SIGINFO 0x53494749 -#define NT_FILE 0x46494c45 -#define NT_PRXFPREG 0x46e62b7f /* copied from gdb5.1/include/elf/common.h */ -#define NT_PPC_VMX 0x100 /* PowerPC Altivec/VMX registers */ -#define NT_PPC_SPE 0x101 /* PowerPC SPE/EVR registers */ -#define NT_PPC_VSX 0x102 /* PowerPC VSX registers */ -#define NT_386_TLS 0x200 /* i386 TLS slots (struct user_desc) */ -#define NT_386_IOPERM 0x201 /* x86 io permission bitmap (1=deny) */ -#define NT_X86_XSTATE 0x202 /* x86 extended state using xsave */ -#define NT_S390_HIGH_GPRS 0x300 /* s390 upper register halves */ -#define NT_S390_TIMER 0x301 /* s390 timer register */ -#define NT_S390_TODCMP 0x302 /* s390 TOD clock comparator register */ -#define NT_S390_TODPREG 0x303 /* s390 TOD programmable register */ -#define NT_S390_CTRS 0x304 /* s390 control registers */ -#define NT_S390_PREFIX 0x305 /* s390 prefix register */ -#define NT_S390_LAST_BREAK 0x306 /* s390 breaking event address */ -#define NT_S390_SYSTEM_CALL 0x307 /* s390 system call restart data */ -#define NT_S390_TDB 0x308 /* s390 transaction diagnostic block */ -#define NT_ARM_VFP 0x400 /* ARM VFP/NEON registers */ -#define NT_ARM_TLS 0x401 /* ARM TLS register */ -#define NT_ARM_HW_BREAK 0x402 /* ARM hardware breakpoint registers */ -#define NT_ARM_HW_WATCH 0x403 /* ARM hardware watchpoint registers */ - - -/* Note header in a PT_NOTE section */ -typedef struct elf32_note { - Elf32_Word n_namesz; /* Name size */ - Elf32_Word n_descsz; /* Content size */ - Elf32_Word n_type; /* Content type */ -} Elf32_Nhdr; - -/* Note header in a PT_NOTE section */ -typedef struct elf64_note { - Elf64_Word n_namesz; /* Name size */ - Elf64_Word n_descsz; /* Content size */ - Elf64_Word n_type; /* Content type */ -} Elf64_Nhdr; +#include <uapi/linux/elf.h> -#ifdef __KERNEL__ #ifndef elf_read_implies_exec /* Executables for which elf_read_implies_exec() returns TRUE will have the READ_IMPLIES_EXEC personality flag set automatically. @@ -455,5 +44,4 @@ static inline int elf_coredump_extra_notes_write(struct file *file, extern int elf_coredump_extra_notes_size(void); extern int elf_coredump_extra_notes_write(struct file *file, loff_t *foffset); #endif -#endif /* __KERNEL__ */ #endif /* _LINUX_ELF_H */ diff --git a/include/linux/elfcore.h b/include/linux/elfcore.h index 0698c79fbcb..cdd3d13efce 100644 --- a/include/linux/elfcore.h +++ b/include/linux/elfcore.h @@ -1,109 +1,11 @@ #ifndef _LINUX_ELFCORE_H #define _LINUX_ELFCORE_H -#include <linux/types.h> -#include <linux/signal.h> -#include <linux/time.h> -#ifdef __KERNEL__ #include <linux/user.h> #include <linux/bug.h> -#endif -#include <linux/ptrace.h> -#include <linux/elf.h> -#include <linux/fs.h> - -struct elf_siginfo -{ - int si_signo; /* signal number */ - int si_code; /* extra code */ - int si_errno; /* errno */ -}; - -#ifdef __KERNEL__ #include <asm/elf.h> -#endif +#include <uapi/linux/elfcore.h> -#ifndef __KERNEL__ -typedef elf_greg_t greg_t; -typedef elf_gregset_t gregset_t; -typedef elf_fpregset_t fpregset_t; -typedef elf_fpxregset_t fpxregset_t; -#define NGREG ELF_NGREG -#endif - -/* - * Definitions to generate Intel SVR4-like core files. - * These mostly have the same names as the SVR4 types with "elf_" - * tacked on the front to prevent clashes with linux definitions, - * and the typedef forms have been avoided. This is mostly like - * the SVR4 structure, but more Linuxy, with things that Linux does - * not support and which gdb doesn't really use excluded. - * Fields present but not used are marked with "XXX". - */ -struct elf_prstatus -{ -#if 0 - long pr_flags; /* XXX Process flags */ - short pr_why; /* XXX Reason for process halt */ - short pr_what; /* XXX More detailed reason */ -#endif - struct elf_siginfo pr_info; /* Info associated with signal */ - short pr_cursig; /* Current signal */ - unsigned long pr_sigpend; /* Set of pending signals */ - unsigned long pr_sighold; /* Set of held signals */ -#if 0 - struct sigaltstack pr_altstack; /* Alternate stack info */ - struct sigaction pr_action; /* Signal action for current sig */ -#endif - pid_t pr_pid; - pid_t pr_ppid; - pid_t pr_pgrp; - pid_t pr_sid; - struct timeval pr_utime; /* User time */ - struct timeval pr_stime; /* System time */ - struct timeval pr_cutime; /* Cumulative user time */ - struct timeval pr_cstime; /* Cumulative system time */ -#if 0 - long pr_instr; /* Current instruction */ -#endif - elf_gregset_t pr_reg; /* GP registers */ -#ifdef CONFIG_BINFMT_ELF_FDPIC - /* When using FDPIC, the loadmap addresses need to be communicated - * to GDB in order for GDB to do the necessary relocations. The - * fields (below) used to communicate this information are placed - * immediately after ``pr_reg'', so that the loadmap addresses may - * be viewed as part of the register set if so desired. - */ - unsigned long pr_exec_fdpic_loadmap; - unsigned long pr_interp_fdpic_loadmap; -#endif - int pr_fpvalid; /* True if math co-processor being used. */ -}; - -#define ELF_PRARGSZ (80) /* Number of chars for args */ - -struct elf_prpsinfo -{ - char pr_state; /* numeric process state */ - char pr_sname; /* char for pr_state */ - char pr_zomb; /* zombie */ - char pr_nice; /* nice val */ - unsigned long pr_flag; /* flags */ - __kernel_uid_t pr_uid; - __kernel_gid_t pr_gid; - pid_t pr_pid, pr_ppid, pr_pgrp, pr_sid; - /* Lots missing */ - char pr_fname[16]; /* filename of executable */ - char pr_psargs[ELF_PRARGSZ]; /* initial part of arg list */ -}; - -#ifndef __KERNEL__ -typedef struct elf_prstatus prstatus_t; -typedef struct elf_prpsinfo prpsinfo_t; -#define PRARGSZ ELF_PRARGSZ -#endif - -#ifdef __KERNEL__ static inline void elf_core_copy_regs(elf_gregset_t *elfregs, struct pt_regs *regs) { #ifdef ELF_CORE_COPY_REGS @@ -167,6 +69,4 @@ extern int elf_core_write_extra_data(struct file *file, size_t *size, unsigned long limit); extern size_t elf_core_extra_data_size(void); -#endif /* __KERNEL__ */ - #endif /* _LINUX_ELFCORE_H */ diff --git a/include/linux/errno.h b/include/linux/errno.h index e0de516374d..f6bf082d4d4 100644 --- a/include/linux/errno.h +++ b/include/linux/errno.h @@ -1,9 +1,8 @@ #ifndef _LINUX_ERRNO_H #define _LINUX_ERRNO_H -#include <asm/errno.h> +#include <uapi/linux/errno.h> -#ifdef __KERNEL__ /* * These should never be seen by user programs. To return one of ERESTART* @@ -32,5 +31,3 @@ #define EIOCBRETRY 530 /* iocb queued, will trigger a retry */ #endif - -#endif diff --git a/include/linux/errqueue.h b/include/linux/errqueue.h index fd0628be45c..9ca23fcfb5d 100644 --- a/include/linux/errqueue.h +++ b/include/linux/errqueue.h @@ -1,33 +1,12 @@ #ifndef _LINUX_ERRQUEUE_H #define _LINUX_ERRQUEUE_H 1 -#include <linux/types.h> - -struct sock_extended_err { - __u32 ee_errno; - __u8 ee_origin; - __u8 ee_type; - __u8 ee_code; - __u8 ee_pad; - __u32 ee_info; - __u32 ee_data; -}; - -#define SO_EE_ORIGIN_NONE 0 -#define SO_EE_ORIGIN_LOCAL 1 -#define SO_EE_ORIGIN_ICMP 2 -#define SO_EE_ORIGIN_ICMP6 3 -#define SO_EE_ORIGIN_TXSTATUS 4 -#define SO_EE_ORIGIN_TIMESTAMPING SO_EE_ORIGIN_TXSTATUS - -#define SO_EE_OFFENDER(ee) ((struct sockaddr*)((ee)+1)) - -#ifdef __KERNEL__ #include <net/ip.h> #if IS_ENABLED(CONFIG_IPV6) #include <linux/ipv6.h> #endif +#include <uapi/linux/errqueue.h> #define SKB_EXT_ERR(skb) ((struct sock_exterr_skb *) ((skb)->cb)) @@ -44,5 +23,3 @@ struct sock_exterr_skb { }; #endif - -#endif diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h index fcb4f8e60c1..c8e3e7e39c6 100644 --- a/include/linux/ethtool.h +++ b/include/linux/ethtool.h @@ -9,596 +9,12 @@ * scott.feldman@intel.com) * Portions Copyright (C) Sun Microsystems 2008 */ - #ifndef _LINUX_ETHTOOL_H #define _LINUX_ETHTOOL_H -#ifdef __KERNEL__ #include <linux/compat.h> -#endif -#include <linux/types.h> -#include <linux/if_ether.h> - -/* This should work for both 32 and 64 bit userland. */ -struct ethtool_cmd { - __u32 cmd; - __u32 supported; /* Features this interface supports */ - __u32 advertising; /* Features this interface advertises */ - __u16 speed; /* The forced speed (lower bits) in - * Mbps. Please use - * ethtool_cmd_speed()/_set() to - * access it */ - __u8 duplex; /* Duplex, half or full */ - __u8 port; /* Which connector port */ - __u8 phy_address; /* MDIO PHY address (PRTAD for clause 45). - * May be read-only or read-write - * depending on the driver. - */ - __u8 transceiver; /* Which transceiver to use */ - __u8 autoneg; /* Enable or disable autonegotiation */ - __u8 mdio_support; /* MDIO protocols supported. Read-only. - * Not set by all drivers. - */ - __u32 maxtxpkt; /* Tx pkts before generating tx int */ - __u32 maxrxpkt; /* Rx pkts before generating rx int */ - __u16 speed_hi; /* The forced speed (upper - * bits) in Mbps. Please use - * ethtool_cmd_speed()/_set() to - * access it */ - __u8 eth_tp_mdix; /* twisted pair MDI-X status */ - __u8 eth_tp_mdix_ctrl; /* twisted pair MDI-X control, when set, - * link should be renegotiated if necessary - */ - __u32 lp_advertising; /* Features the link partner advertises */ - __u32 reserved[2]; -}; - -static inline void ethtool_cmd_speed_set(struct ethtool_cmd *ep, - __u32 speed) -{ - - ep->speed = (__u16)speed; - ep->speed_hi = (__u16)(speed >> 16); -} - -static inline __u32 ethtool_cmd_speed(const struct ethtool_cmd *ep) -{ - return (ep->speed_hi << 16) | ep->speed; -} - -/* Device supports clause 22 register access to PHY or peripherals - * using the interface defined in <linux/mii.h>. This should not be - * set if there are known to be no such peripherals present or if - * the driver only emulates clause 22 registers for compatibility. - */ -#define ETH_MDIO_SUPPORTS_C22 1 - -/* Device supports clause 45 register access to PHY or peripherals - * using the interface defined in <linux/mii.h> and <linux/mdio.h>. - * This should not be set if there are known to be no such peripherals - * present. - */ -#define ETH_MDIO_SUPPORTS_C45 2 - -#define ETHTOOL_FWVERS_LEN 32 -#define ETHTOOL_BUSINFO_LEN 32 -/* these strings are set to whatever the driver author decides... */ -struct ethtool_drvinfo { - __u32 cmd; - char driver[32]; /* driver short name, "tulip", "eepro100" */ - char version[32]; /* driver version string */ - char fw_version[ETHTOOL_FWVERS_LEN]; /* firmware version string */ - char bus_info[ETHTOOL_BUSINFO_LEN]; /* Bus info for this IF. */ - /* For PCI devices, use pci_name(pci_dev). */ - char reserved1[32]; - char reserved2[12]; - /* - * Some struct members below are filled in - * using ops->get_sset_count(). Obtaining - * this info from ethtool_drvinfo is now - * deprecated; Use ETHTOOL_GSSET_INFO - * instead. - */ - __u32 n_priv_flags; /* number of flags valid in ETHTOOL_GPFLAGS */ - __u32 n_stats; /* number of u64's from ETHTOOL_GSTATS */ - __u32 testinfo_len; - __u32 eedump_len; /* Size of data from ETHTOOL_GEEPROM (bytes) */ - __u32 regdump_len; /* Size of data from ETHTOOL_GREGS (bytes) */ -}; - -#define SOPASS_MAX 6 -/* wake-on-lan settings */ -struct ethtool_wolinfo { - __u32 cmd; - __u32 supported; - __u32 wolopts; - __u8 sopass[SOPASS_MAX]; /* SecureOn(tm) password */ -}; - -/* for passing single values */ -struct ethtool_value { - __u32 cmd; - __u32 data; -}; - -/* for passing big chunks of data */ -struct ethtool_regs { - __u32 cmd; - __u32 version; /* driver-specific, indicates different chips/revs */ - __u32 len; /* bytes */ - __u8 data[0]; -}; - -/* for passing EEPROM chunks */ -struct ethtool_eeprom { - __u32 cmd; - __u32 magic; - __u32 offset; /* in bytes */ - __u32 len; /* in bytes */ - __u8 data[0]; -}; - -/** - * struct ethtool_eee - Energy Efficient Ethernet information - * @cmd: ETHTOOL_{G,S}EEE - * @supported: Mask of %SUPPORTED_* flags for the speed/duplex combinations - * for which there is EEE support. - * @advertised: Mask of %ADVERTISED_* flags for the speed/duplex combinations - * advertised as eee capable. - * @lp_advertised: Mask of %ADVERTISED_* flags for the speed/duplex - * combinations advertised by the link partner as eee capable. - * @eee_active: Result of the eee auto negotiation. - * @eee_enabled: EEE configured mode (enabled/disabled). - * @tx_lpi_enabled: Whether the interface should assert its tx lpi, given - * that eee was negotiated. - * @tx_lpi_timer: Time in microseconds the interface delays prior to asserting - * its tx lpi (after reaching 'idle' state). Effective only when eee - * was negotiated and tx_lpi_enabled was set. - */ -struct ethtool_eee { - __u32 cmd; - __u32 supported; - __u32 advertised; - __u32 lp_advertised; - __u32 eee_active; - __u32 eee_enabled; - __u32 tx_lpi_enabled; - __u32 tx_lpi_timer; - __u32 reserved[2]; -}; - -/** - * struct ethtool_modinfo - plugin module eeprom information - * @cmd: %ETHTOOL_GMODULEINFO - * @type: Standard the module information conforms to %ETH_MODULE_SFF_xxxx - * @eeprom_len: Length of the eeprom - * - * This structure is used to return the information to - * properly size memory for a subsequent call to %ETHTOOL_GMODULEEEPROM. - * The type code indicates the eeprom data format - */ -struct ethtool_modinfo { - __u32 cmd; - __u32 type; - __u32 eeprom_len; - __u32 reserved[8]; -}; - -/** - * struct ethtool_coalesce - coalescing parameters for IRQs and stats updates - * @cmd: ETHTOOL_{G,S}COALESCE - * @rx_coalesce_usecs: How many usecs to delay an RX interrupt after - * a packet arrives. - * @rx_max_coalesced_frames: Maximum number of packets to receive - * before an RX interrupt. - * @rx_coalesce_usecs_irq: Same as @rx_coalesce_usecs, except that - * this value applies while an IRQ is being serviced by the host. - * @rx_max_coalesced_frames_irq: Same as @rx_max_coalesced_frames, - * except that this value applies while an IRQ is being serviced - * by the host. - * @tx_coalesce_usecs: How many usecs to delay a TX interrupt after - * a packet is sent. - * @tx_max_coalesced_frames: Maximum number of packets to be sent - * before a TX interrupt. - * @tx_coalesce_usecs_irq: Same as @tx_coalesce_usecs, except that - * this value applies while an IRQ is being serviced by the host. - * @tx_max_coalesced_frames_irq: Same as @tx_max_coalesced_frames, - * except that this value applies while an IRQ is being serviced - * by the host. - * @stats_block_coalesce_usecs: How many usecs to delay in-memory - * statistics block updates. Some drivers do not have an - * in-memory statistic block, and in such cases this value is - * ignored. This value must not be zero. - * @use_adaptive_rx_coalesce: Enable adaptive RX coalescing. - * @use_adaptive_tx_coalesce: Enable adaptive TX coalescing. - * @pkt_rate_low: Threshold for low packet rate (packets per second). - * @rx_coalesce_usecs_low: How many usecs to delay an RX interrupt after - * a packet arrives, when the packet rate is below @pkt_rate_low. - * @rx_max_coalesced_frames_low: Maximum number of packets to be received - * before an RX interrupt, when the packet rate is below @pkt_rate_low. - * @tx_coalesce_usecs_low: How many usecs to delay a TX interrupt after - * a packet is sent, when the packet rate is below @pkt_rate_low. - * @tx_max_coalesced_frames_low: Maximum nuumber of packets to be sent before - * a TX interrupt, when the packet rate is below @pkt_rate_low. - * @pkt_rate_high: Threshold for high packet rate (packets per second). - * @rx_coalesce_usecs_high: How many usecs to delay an RX interrupt after - * a packet arrives, when the packet rate is above @pkt_rate_high. - * @rx_max_coalesced_frames_high: Maximum number of packets to be received - * before an RX interrupt, when the packet rate is above @pkt_rate_high. - * @tx_coalesce_usecs_high: How many usecs to delay a TX interrupt after - * a packet is sent, when the packet rate is above @pkt_rate_high. - * @tx_max_coalesced_frames_high: Maximum number of packets to be sent before - * a TX interrupt, when the packet rate is above @pkt_rate_high. - * @rate_sample_interval: How often to do adaptive coalescing packet rate - * sampling, measured in seconds. Must not be zero. - * - * Each pair of (usecs, max_frames) fields specifies this exit - * condition for interrupt coalescing: - * (usecs > 0 && time_since_first_completion >= usecs) || - * (max_frames > 0 && completed_frames >= max_frames) - * It is illegal to set both usecs and max_frames to zero as this - * would cause interrupts to never be generated. To disable - * coalescing, set usecs = 0 and max_frames = 1. - * - * Some implementations ignore the value of max_frames and use the - * condition: - * time_since_first_completion >= usecs - * This is deprecated. Drivers for hardware that does not support - * counting completions should validate that max_frames == !rx_usecs. - * - * Adaptive RX/TX coalescing is an algorithm implemented by some - * drivers to improve latency under low packet rates and improve - * throughput under high packet rates. Some drivers only implement - * one of RX or TX adaptive coalescing. Anything not implemented by - * the driver causes these values to be silently ignored. - * - * When the packet rate is below @pkt_rate_high but above - * @pkt_rate_low (both measured in packets per second) the - * normal {rx,tx}_* coalescing parameters are used. - */ -struct ethtool_coalesce { - __u32 cmd; - __u32 rx_coalesce_usecs; - __u32 rx_max_coalesced_frames; - __u32 rx_coalesce_usecs_irq; - __u32 rx_max_coalesced_frames_irq; - __u32 tx_coalesce_usecs; - __u32 tx_max_coalesced_frames; - __u32 tx_coalesce_usecs_irq; - __u32 tx_max_coalesced_frames_irq; - __u32 stats_block_coalesce_usecs; - __u32 use_adaptive_rx_coalesce; - __u32 use_adaptive_tx_coalesce; - __u32 pkt_rate_low; - __u32 rx_coalesce_usecs_low; - __u32 rx_max_coalesced_frames_low; - __u32 tx_coalesce_usecs_low; - __u32 tx_max_coalesced_frames_low; - __u32 pkt_rate_high; - __u32 rx_coalesce_usecs_high; - __u32 rx_max_coalesced_frames_high; - __u32 tx_coalesce_usecs_high; - __u32 tx_max_coalesced_frames_high; - __u32 rate_sample_interval; -}; - -/* for configuring RX/TX ring parameters */ -struct ethtool_ringparam { - __u32 cmd; /* ETHTOOL_{G,S}RINGPARAM */ - - /* Read only attributes. These indicate the maximum number - * of pending RX/TX ring entries the driver will allow the - * user to set. - */ - __u32 rx_max_pending; - __u32 rx_mini_max_pending; - __u32 rx_jumbo_max_pending; - __u32 tx_max_pending; - - /* Values changeable by the user. The valid values are - * in the range 1 to the "*_max_pending" counterpart above. - */ - __u32 rx_pending; - __u32 rx_mini_pending; - __u32 rx_jumbo_pending; - __u32 tx_pending; -}; - -/** - * struct ethtool_channels - configuring number of network channel - * @cmd: ETHTOOL_{G,S}CHANNELS - * @max_rx: Read only. Maximum number of receive channel the driver support. - * @max_tx: Read only. Maximum number of transmit channel the driver support. - * @max_other: Read only. Maximum number of other channel the driver support. - * @max_combined: Read only. Maximum number of combined channel the driver - * support. Set of queues RX, TX or other. - * @rx_count: Valid values are in the range 1 to the max_rx. - * @tx_count: Valid values are in the range 1 to the max_tx. - * @other_count: Valid values are in the range 1 to the max_other. - * @combined_count: Valid values are in the range 1 to the max_combined. - * - * This can be used to configure RX, TX and other channels. - */ - -struct ethtool_channels { - __u32 cmd; - __u32 max_rx; - __u32 max_tx; - __u32 max_other; - __u32 max_combined; - __u32 rx_count; - __u32 tx_count; - __u32 other_count; - __u32 combined_count; -}; - -/* for configuring link flow control parameters */ -struct ethtool_pauseparam { - __u32 cmd; /* ETHTOOL_{G,S}PAUSEPARAM */ - - /* If the link is being auto-negotiated (via ethtool_cmd.autoneg - * being true) the user may set 'autoneg' here non-zero to have the - * pause parameters be auto-negotiated too. In such a case, the - * {rx,tx}_pause values below determine what capabilities are - * advertised. - * - * If 'autoneg' is zero or the link is not being auto-negotiated, - * then {rx,tx}_pause force the driver to use/not-use pause - * flow control. - */ - __u32 autoneg; - __u32 rx_pause; - __u32 tx_pause; -}; - -#define ETH_GSTRING_LEN 32 -enum ethtool_stringset { - ETH_SS_TEST = 0, - ETH_SS_STATS, - ETH_SS_PRIV_FLAGS, - ETH_SS_NTUPLE_FILTERS, /* Do not use, GRXNTUPLE is now deprecated */ - ETH_SS_FEATURES, -}; - -/* for passing string sets for data tagging */ -struct ethtool_gstrings { - __u32 cmd; /* ETHTOOL_GSTRINGS */ - __u32 string_set; /* string set id e.c. ETH_SS_TEST, etc*/ - __u32 len; /* number of strings in the string set */ - __u8 data[0]; -}; - -struct ethtool_sset_info { - __u32 cmd; /* ETHTOOL_GSSET_INFO */ - __u32 reserved; - __u64 sset_mask; /* input: each bit selects an sset to query */ - /* output: each bit a returned sset */ - __u32 data[0]; /* ETH_SS_xxx count, in order, based on bits - in sset_mask. One bit implies one - __u32, two bits implies two - __u32's, etc. */ -}; - -/** - * enum ethtool_test_flags - flags definition of ethtool_test - * @ETH_TEST_FL_OFFLINE: if set perform online and offline tests, otherwise - * only online tests. - * @ETH_TEST_FL_FAILED: Driver set this flag if test fails. - * @ETH_TEST_FL_EXTERNAL_LB: Application request to perform external loopback - * test. - * @ETH_TEST_FL_EXTERNAL_LB_DONE: Driver performed the external loopback test - */ - -enum ethtool_test_flags { - ETH_TEST_FL_OFFLINE = (1 << 0), - ETH_TEST_FL_FAILED = (1 << 1), - ETH_TEST_FL_EXTERNAL_LB = (1 << 2), - ETH_TEST_FL_EXTERNAL_LB_DONE = (1 << 3), -}; - -/* for requesting NIC test and getting results*/ -struct ethtool_test { - __u32 cmd; /* ETHTOOL_TEST */ - __u32 flags; /* ETH_TEST_FL_xxx */ - __u32 reserved; - __u32 len; /* result length, in number of u64 elements */ - __u64 data[0]; -}; - -/* for dumping NIC-specific statistics */ -struct ethtool_stats { - __u32 cmd; /* ETHTOOL_GSTATS */ - __u32 n_stats; /* number of u64's being returned */ - __u64 data[0]; -}; - -struct ethtool_perm_addr { - __u32 cmd; /* ETHTOOL_GPERMADDR */ - __u32 size; - __u8 data[0]; -}; - -/* boolean flags controlling per-interface behavior characteristics. - * When reading, the flag indicates whether or not a certain behavior - * is enabled/present. When writing, the flag indicates whether - * or not the driver should turn on (set) or off (clear) a behavior. - * - * Some behaviors may read-only (unconditionally absent or present). - * If such is the case, return EINVAL in the set-flags operation if the - * flag differs from the read-only value. - */ -enum ethtool_flags { - ETH_FLAG_TXVLAN = (1 << 7), /* TX VLAN offload enabled */ - ETH_FLAG_RXVLAN = (1 << 8), /* RX VLAN offload enabled */ - ETH_FLAG_LRO = (1 << 15), /* LRO is enabled */ - ETH_FLAG_NTUPLE = (1 << 27), /* N-tuple filters enabled */ - ETH_FLAG_RXHASH = (1 << 28), -}; +#include <uapi/linux/ethtool.h> -/* The following structures are for supporting RX network flow - * classification and RX n-tuple configuration. Note, all multibyte - * fields, e.g., ip4src, ip4dst, psrc, pdst, spi, etc. are expected to - * be in network byte order. - */ - -/** - * struct ethtool_tcpip4_spec - flow specification for TCP/IPv4 etc. - * @ip4src: Source host - * @ip4dst: Destination host - * @psrc: Source port - * @pdst: Destination port - * @tos: Type-of-service - * - * This can be used to specify a TCP/IPv4, UDP/IPv4 or SCTP/IPv4 flow. - */ -struct ethtool_tcpip4_spec { - __be32 ip4src; - __be32 ip4dst; - __be16 psrc; - __be16 pdst; - __u8 tos; -}; - -/** - * struct ethtool_ah_espip4_spec - flow specification for IPsec/IPv4 - * @ip4src: Source host - * @ip4dst: Destination host - * @spi: Security parameters index - * @tos: Type-of-service - * - * This can be used to specify an IPsec transport or tunnel over IPv4. - */ -struct ethtool_ah_espip4_spec { - __be32 ip4src; - __be32 ip4dst; - __be32 spi; - __u8 tos; -}; - -#define ETH_RX_NFC_IP4 1 - -/** - * struct ethtool_usrip4_spec - general flow specification for IPv4 - * @ip4src: Source host - * @ip4dst: Destination host - * @l4_4_bytes: First 4 bytes of transport (layer 4) header - * @tos: Type-of-service - * @ip_ver: Value must be %ETH_RX_NFC_IP4; mask must be 0 - * @proto: Transport protocol number; mask must be 0 - */ -struct ethtool_usrip4_spec { - __be32 ip4src; - __be32 ip4dst; - __be32 l4_4_bytes; - __u8 tos; - __u8 ip_ver; - __u8 proto; -}; - -union ethtool_flow_union { - struct ethtool_tcpip4_spec tcp_ip4_spec; - struct ethtool_tcpip4_spec udp_ip4_spec; - struct ethtool_tcpip4_spec sctp_ip4_spec; - struct ethtool_ah_espip4_spec ah_ip4_spec; - struct ethtool_ah_espip4_spec esp_ip4_spec; - struct ethtool_usrip4_spec usr_ip4_spec; - struct ethhdr ether_spec; - __u8 hdata[60]; -}; - -struct ethtool_flow_ext { - __be16 vlan_etype; - __be16 vlan_tci; - __be32 data[2]; -}; - -/** - * struct ethtool_rx_flow_spec - classification rule for RX flows - * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW - * @h_u: Flow fields to match (dependent on @flow_type) - * @h_ext: Additional fields to match - * @m_u: Masks for flow field bits to be matched - * @m_ext: Masks for additional field bits to be matched - * Note, all additional fields must be ignored unless @flow_type - * includes the %FLOW_EXT flag. - * @ring_cookie: RX ring/queue index to deliver to, or %RX_CLS_FLOW_DISC - * if packets should be discarded - * @location: Location of rule in the table. Locations must be - * numbered such that a flow matching multiple rules will be - * classified according to the first (lowest numbered) rule. - */ -struct ethtool_rx_flow_spec { - __u32 flow_type; - union ethtool_flow_union h_u; - struct ethtool_flow_ext h_ext; - union ethtool_flow_union m_u; - struct ethtool_flow_ext m_ext; - __u64 ring_cookie; - __u32 location; -}; - -/** - * struct ethtool_rxnfc - command to get or set RX flow classification rules - * @cmd: Specific command number - %ETHTOOL_GRXFH, %ETHTOOL_SRXFH, - * %ETHTOOL_GRXRINGS, %ETHTOOL_GRXCLSRLCNT, %ETHTOOL_GRXCLSRULE, - * %ETHTOOL_GRXCLSRLALL, %ETHTOOL_SRXCLSRLDEL or %ETHTOOL_SRXCLSRLINS - * @flow_type: Type of flow to be affected, e.g. %TCP_V4_FLOW - * @data: Command-dependent value - * @fs: Flow classification rule - * @rule_cnt: Number of rules to be affected - * @rule_locs: Array of used rule locations - * - * For %ETHTOOL_GRXFH and %ETHTOOL_SRXFH, @data is a bitmask indicating - * the fields included in the flow hash, e.g. %RXH_IP_SRC. The following - * structure fields must not be used. - * - * For %ETHTOOL_GRXRINGS, @data is set to the number of RX rings/queues - * on return. - * - * For %ETHTOOL_GRXCLSRLCNT, @rule_cnt is set to the number of defined - * rules on return. If @data is non-zero on return then it is the - * size of the rule table, plus the flag %RX_CLS_LOC_SPECIAL if the - * driver supports any special location values. If that flag is not - * set in @data then special location values should not be used. - * - * For %ETHTOOL_GRXCLSRULE, @fs.@location specifies the location of an - * existing rule on entry and @fs contains the rule on return. - * - * For %ETHTOOL_GRXCLSRLALL, @rule_cnt specifies the array size of the - * user buffer for @rule_locs on entry. On return, @data is the size - * of the rule table, @rule_cnt is the number of defined rules, and - * @rule_locs contains the locations of the defined rules. Drivers - * must use the second parameter to get_rxnfc() instead of @rule_locs. - * - * For %ETHTOOL_SRXCLSRLINS, @fs specifies the rule to add or update. - * @fs.@location either specifies the location to use or is a special - * location value with %RX_CLS_LOC_SPECIAL flag set. On return, - * @fs.@location is the actual rule location. - * - * For %ETHTOOL_SRXCLSRLDEL, @fs.@location specifies the location of an - * existing rule on entry. - * - * A driver supporting the special location values for - * %ETHTOOL_SRXCLSRLINS may add the rule at any suitable unused - * location, and may remove a rule at a later location (lower - * priority) that matches exactly the same set of flows. The special - * values are: %RX_CLS_LOC_ANY, selecting any location; - * %RX_CLS_LOC_FIRST, selecting the first suitable location (maximum - * priority); and %RX_CLS_LOC_LAST, selecting the last suitable - * location (minimum priority). Additional special values may be - * defined in future and drivers must return -%EINVAL for any - * unrecognised value. - */ -struct ethtool_rxnfc { - __u32 cmd; - __u32 flow_type; - __u64 data; - struct ethtool_rx_flow_spec fs; - __u32 rule_cnt; - __u32 rule_locs[0]; -}; - -#ifdef __KERNEL__ #ifdef CONFIG_COMPAT struct compat_ethtool_rx_flow_spec { @@ -621,223 +37,6 @@ struct compat_ethtool_rxnfc { }; #endif /* CONFIG_COMPAT */ -#endif /* __KERNEL__ */ - -/** - * struct ethtool_rxfh_indir - command to get or set RX flow hash indirection - * @cmd: Specific command number - %ETHTOOL_GRXFHINDIR or %ETHTOOL_SRXFHINDIR - * @size: On entry, the array size of the user buffer, which may be zero. - * On return from %ETHTOOL_GRXFHINDIR, the array size of the hardware - * indirection table. - * @ring_index: RX ring/queue index for each hash value - * - * For %ETHTOOL_GRXFHINDIR, a @size of zero means that only the size - * should be returned. For %ETHTOOL_SRXFHINDIR, a @size of zero means - * the table should be reset to default values. This last feature - * is not supported by the original implementations. - */ -struct ethtool_rxfh_indir { - __u32 cmd; - __u32 size; - __u32 ring_index[0]; -}; - -/** - * struct ethtool_rx_ntuple_flow_spec - specification for RX flow filter - * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW - * @h_u: Flow field values to match (dependent on @flow_type) - * @m_u: Masks for flow field value bits to be ignored - * @vlan_tag: VLAN tag to match - * @vlan_tag_mask: Mask for VLAN tag bits to be ignored - * @data: Driver-dependent data to match - * @data_mask: Mask for driver-dependent data bits to be ignored - * @action: RX ring/queue index to deliver to (non-negative) or other action - * (negative, e.g. %ETHTOOL_RXNTUPLE_ACTION_DROP) - * - * For flow types %TCP_V4_FLOW, %UDP_V4_FLOW and %SCTP_V4_FLOW, where - * a field value and mask are both zero this is treated as if all mask - * bits are set i.e. the field is ignored. - */ -struct ethtool_rx_ntuple_flow_spec { - __u32 flow_type; - union { - struct ethtool_tcpip4_spec tcp_ip4_spec; - struct ethtool_tcpip4_spec udp_ip4_spec; - struct ethtool_tcpip4_spec sctp_ip4_spec; - struct ethtool_ah_espip4_spec ah_ip4_spec; - struct ethtool_ah_espip4_spec esp_ip4_spec; - struct ethtool_usrip4_spec usr_ip4_spec; - struct ethhdr ether_spec; - __u8 hdata[72]; - } h_u, m_u; - - __u16 vlan_tag; - __u16 vlan_tag_mask; - __u64 data; - __u64 data_mask; - - __s32 action; -#define ETHTOOL_RXNTUPLE_ACTION_DROP (-1) /* drop packet */ -#define ETHTOOL_RXNTUPLE_ACTION_CLEAR (-2) /* clear filter */ -}; - -/** - * struct ethtool_rx_ntuple - command to set or clear RX flow filter - * @cmd: Command number - %ETHTOOL_SRXNTUPLE - * @fs: Flow filter specification - */ -struct ethtool_rx_ntuple { - __u32 cmd; - struct ethtool_rx_ntuple_flow_spec fs; -}; - -#define ETHTOOL_FLASH_MAX_FILENAME 128 -enum ethtool_flash_op_type { - ETHTOOL_FLASH_ALL_REGIONS = 0, -}; - -/* for passing firmware flashing related parameters */ -struct ethtool_flash { - __u32 cmd; - __u32 region; - char data[ETHTOOL_FLASH_MAX_FILENAME]; -}; - -/** - * struct ethtool_dump - used for retrieving, setting device dump - * @cmd: Command number - %ETHTOOL_GET_DUMP_FLAG, %ETHTOOL_GET_DUMP_DATA, or - * %ETHTOOL_SET_DUMP - * @version: FW version of the dump, filled in by driver - * @flag: driver dependent flag for dump setting, filled in by driver during - * get and filled in by ethtool for set operation. - * flag must be initialized by macro ETH_FW_DUMP_DISABLE value when - * firmware dump is disabled. - * @len: length of dump data, used as the length of the user buffer on entry to - * %ETHTOOL_GET_DUMP_DATA and this is returned as dump length by driver - * for %ETHTOOL_GET_DUMP_FLAG command - * @data: data collected for get dump data operation - */ - -#define ETH_FW_DUMP_DISABLE 0 - -struct ethtool_dump { - __u32 cmd; - __u32 version; - __u32 flag; - __u32 len; - __u8 data[0]; -}; - -/* for returning and changing feature sets */ - -/** - * struct ethtool_get_features_block - block with state of 32 features - * @available: mask of changeable features - * @requested: mask of features requested to be enabled if possible - * @active: mask of currently enabled features - * @never_changed: mask of features not changeable for any device - */ -struct ethtool_get_features_block { - __u32 available; - __u32 requested; - __u32 active; - __u32 never_changed; -}; - -/** - * struct ethtool_gfeatures - command to get state of device's features - * @cmd: command number = %ETHTOOL_GFEATURES - * @size: in: number of elements in the features[] array; - * out: number of elements in features[] needed to hold all features - * @features: state of features - */ -struct ethtool_gfeatures { - __u32 cmd; - __u32 size; - struct ethtool_get_features_block features[0]; -}; - -/** - * struct ethtool_set_features_block - block with request for 32 features - * @valid: mask of features to be changed - * @requested: values of features to be changed - */ -struct ethtool_set_features_block { - __u32 valid; - __u32 requested; -}; - -/** - * struct ethtool_sfeatures - command to request change in device's features - * @cmd: command number = %ETHTOOL_SFEATURES - * @size: array size of the features[] array - * @features: feature change masks - */ -struct ethtool_sfeatures { - __u32 cmd; - __u32 size; - struct ethtool_set_features_block features[0]; -}; - -/** - * struct ethtool_ts_info - holds a device's timestamping and PHC association - * @cmd: command number = %ETHTOOL_GET_TS_INFO - * @so_timestamping: bit mask of the sum of the supported SO_TIMESTAMPING flags - * @phc_index: device index of the associated PHC, or -1 if there is none - * @tx_types: bit mask of the supported hwtstamp_tx_types enumeration values - * @rx_filters: bit mask of the supported hwtstamp_rx_filters enumeration values - * - * The bits in the 'tx_types' and 'rx_filters' fields correspond to - * the 'hwtstamp_tx_types' and 'hwtstamp_rx_filters' enumeration values, - * respectively. For example, if the device supports HWTSTAMP_TX_ON, - * then (1 << HWTSTAMP_TX_ON) in 'tx_types' will be set. - */ -struct ethtool_ts_info { - __u32 cmd; - __u32 so_timestamping; - __s32 phc_index; - __u32 tx_types; - __u32 tx_reserved[3]; - __u32 rx_filters; - __u32 rx_reserved[3]; -}; - -/* - * %ETHTOOL_SFEATURES changes features present in features[].valid to the - * values of corresponding bits in features[].requested. Bits in .requested - * not set in .valid or not changeable are ignored. - * - * Returns %EINVAL when .valid contains undefined or never-changeable bits - * or size is not equal to required number of features words (32-bit blocks). - * Returns >= 0 if request was completed; bits set in the value mean: - * %ETHTOOL_F_UNSUPPORTED - there were bits set in .valid that are not - * changeable (not present in %ETHTOOL_GFEATURES' features[].available) - * those bits were ignored. - * %ETHTOOL_F_WISH - some or all changes requested were recorded but the - * resulting state of bits masked by .valid is not equal to .requested. - * Probably there are other device-specific constraints on some features - * in the set. When %ETHTOOL_F_UNSUPPORTED is set, .valid is considered - * here as though ignored bits were cleared. - * %ETHTOOL_F_COMPAT - some or all changes requested were made by calling - * compatibility functions. Requested offload state cannot be properly - * managed by kernel. - * - * Meaning of bits in the masks are obtained by %ETHTOOL_GSSET_INFO (number of - * bits in the arrays - always multiple of 32) and %ETHTOOL_GSTRINGS commands - * for ETH_SS_FEATURES string set. First entry in the table corresponds to least - * significant bit in features[0] fields. Empty strings mark undefined features. - */ -enum ethtool_sfeatures_retval_bits { - ETHTOOL_F_UNSUPPORTED__BIT, - ETHTOOL_F_WISH__BIT, - ETHTOOL_F_COMPAT__BIT, -}; - -#define ETHTOOL_F_UNSUPPORTED (1 << ETHTOOL_F_UNSUPPORTED__BIT) -#define ETHTOOL_F_WISH (1 << ETHTOOL_F_WISH__BIT) -#define ETHTOOL_F_COMPAT (1 << ETHTOOL_F_COMPAT__BIT) - -#ifdef __KERNEL__ #include <linux/rculist.h> @@ -1049,277 +248,4 @@ struct ethtool_ops { }; -#endif /* __KERNEL__ */ - -/* CMDs currently supported */ -#define ETHTOOL_GSET 0x00000001 /* Get settings. */ -#define ETHTOOL_SSET 0x00000002 /* Set settings. */ -#define ETHTOOL_GDRVINFO 0x00000003 /* Get driver info. */ -#define ETHTOOL_GREGS 0x00000004 /* Get NIC registers. */ -#define ETHTOOL_GWOL 0x00000005 /* Get wake-on-lan options. */ -#define ETHTOOL_SWOL 0x00000006 /* Set wake-on-lan options. */ -#define ETHTOOL_GMSGLVL 0x00000007 /* Get driver message level */ -#define ETHTOOL_SMSGLVL 0x00000008 /* Set driver msg level. */ -#define ETHTOOL_NWAY_RST 0x00000009 /* Restart autonegotiation. */ -/* Get link status for host, i.e. whether the interface *and* the - * physical port (if there is one) are up (ethtool_value). */ -#define ETHTOOL_GLINK 0x0000000a -#define ETHTOOL_GEEPROM 0x0000000b /* Get EEPROM data */ -#define ETHTOOL_SEEPROM 0x0000000c /* Set EEPROM data. */ -#define ETHTOOL_GCOALESCE 0x0000000e /* Get coalesce config */ -#define ETHTOOL_SCOALESCE 0x0000000f /* Set coalesce config. */ -#define ETHTOOL_GRINGPARAM 0x00000010 /* Get ring parameters */ -#define ETHTOOL_SRINGPARAM 0x00000011 /* Set ring parameters. */ -#define ETHTOOL_GPAUSEPARAM 0x00000012 /* Get pause parameters */ -#define ETHTOOL_SPAUSEPARAM 0x00000013 /* Set pause parameters. */ -#define ETHTOOL_GRXCSUM 0x00000014 /* Get RX hw csum enable (ethtool_value) */ -#define ETHTOOL_SRXCSUM 0x00000015 /* Set RX hw csum enable (ethtool_value) */ -#define ETHTOOL_GTXCSUM 0x00000016 /* Get TX hw csum enable (ethtool_value) */ -#define ETHTOOL_STXCSUM 0x00000017 /* Set TX hw csum enable (ethtool_value) */ -#define ETHTOOL_GSG 0x00000018 /* Get scatter-gather enable - * (ethtool_value) */ -#define ETHTOOL_SSG 0x00000019 /* Set scatter-gather enable - * (ethtool_value). */ -#define ETHTOOL_TEST 0x0000001a /* execute NIC self-test. */ -#define ETHTOOL_GSTRINGS 0x0000001b /* get specified string set */ -#define ETHTOOL_PHYS_ID 0x0000001c /* identify the NIC */ -#define ETHTOOL_GSTATS 0x0000001d /* get NIC-specific statistics */ -#define ETHTOOL_GTSO 0x0000001e /* Get TSO enable (ethtool_value) */ -#define ETHTOOL_STSO 0x0000001f /* Set TSO enable (ethtool_value) */ -#define ETHTOOL_GPERMADDR 0x00000020 /* Get permanent hardware address */ -#define ETHTOOL_GUFO 0x00000021 /* Get UFO enable (ethtool_value) */ -#define ETHTOOL_SUFO 0x00000022 /* Set UFO enable (ethtool_value) */ -#define ETHTOOL_GGSO 0x00000023 /* Get GSO enable (ethtool_value) */ -#define ETHTOOL_SGSO 0x00000024 /* Set GSO enable (ethtool_value) */ -#define ETHTOOL_GFLAGS 0x00000025 /* Get flags bitmap(ethtool_value) */ -#define ETHTOOL_SFLAGS 0x00000026 /* Set flags bitmap(ethtool_value) */ -#define ETHTOOL_GPFLAGS 0x00000027 /* Get driver-private flags bitmap */ -#define ETHTOOL_SPFLAGS 0x00000028 /* Set driver-private flags bitmap */ - -#define ETHTOOL_GRXFH 0x00000029 /* Get RX flow hash configuration */ -#define ETHTOOL_SRXFH 0x0000002a /* Set RX flow hash configuration */ -#define ETHTOOL_GGRO 0x0000002b /* Get GRO enable (ethtool_value) */ -#define ETHTOOL_SGRO 0x0000002c /* Set GRO enable (ethtool_value) */ -#define ETHTOOL_GRXRINGS 0x0000002d /* Get RX rings available for LB */ -#define ETHTOOL_GRXCLSRLCNT 0x0000002e /* Get RX class rule count */ -#define ETHTOOL_GRXCLSRULE 0x0000002f /* Get RX classification rule */ -#define ETHTOOL_GRXCLSRLALL 0x00000030 /* Get all RX classification rule */ -#define ETHTOOL_SRXCLSRLDEL 0x00000031 /* Delete RX classification rule */ -#define ETHTOOL_SRXCLSRLINS 0x00000032 /* Insert RX classification rule */ -#define ETHTOOL_FLASHDEV 0x00000033 /* Flash firmware to device */ -#define ETHTOOL_RESET 0x00000034 /* Reset hardware */ -#define ETHTOOL_SRXNTUPLE 0x00000035 /* Add an n-tuple filter to device */ -#define ETHTOOL_GRXNTUPLE 0x00000036 /* deprecated */ -#define ETHTOOL_GSSET_INFO 0x00000037 /* Get string set info */ -#define ETHTOOL_GRXFHINDIR 0x00000038 /* Get RX flow hash indir'n table */ -#define ETHTOOL_SRXFHINDIR 0x00000039 /* Set RX flow hash indir'n table */ - -#define ETHTOOL_GFEATURES 0x0000003a /* Get device offload settings */ -#define ETHTOOL_SFEATURES 0x0000003b /* Change device offload settings */ -#define ETHTOOL_GCHANNELS 0x0000003c /* Get no of channels */ -#define ETHTOOL_SCHANNELS 0x0000003d /* Set no of channels */ -#define ETHTOOL_SET_DUMP 0x0000003e /* Set dump settings */ -#define ETHTOOL_GET_DUMP_FLAG 0x0000003f /* Get dump settings */ -#define ETHTOOL_GET_DUMP_DATA 0x00000040 /* Get dump data */ -#define ETHTOOL_GET_TS_INFO 0x00000041 /* Get time stamping and PHC info */ -#define ETHTOOL_GMODULEINFO 0x00000042 /* Get plug-in module information */ -#define ETHTOOL_GMODULEEEPROM 0x00000043 /* Get plug-in module eeprom */ -#define ETHTOOL_GEEE 0x00000044 /* Get EEE settings */ -#define ETHTOOL_SEEE 0x00000045 /* Set EEE settings */ - -/* compatibility with older code */ -#define SPARC_ETH_GSET ETHTOOL_GSET -#define SPARC_ETH_SSET ETHTOOL_SSET - -/* Indicates what features are supported by the interface. */ -#define SUPPORTED_10baseT_Half (1 << 0) -#define SUPPORTED_10baseT_Full (1 << 1) -#define SUPPORTED_100baseT_Half (1 << 2) -#define SUPPORTED_100baseT_Full (1 << 3) -#define SUPPORTED_1000baseT_Half (1 << 4) -#define SUPPORTED_1000baseT_Full (1 << 5) -#define SUPPORTED_Autoneg (1 << 6) -#define SUPPORTED_TP (1 << 7) -#define SUPPORTED_AUI (1 << 8) -#define SUPPORTED_MII (1 << 9) -#define SUPPORTED_FIBRE (1 << 10) -#define SUPPORTED_BNC (1 << 11) -#define SUPPORTED_10000baseT_Full (1 << 12) -#define SUPPORTED_Pause (1 << 13) -#define SUPPORTED_Asym_Pause (1 << 14) -#define SUPPORTED_2500baseX_Full (1 << 15) -#define SUPPORTED_Backplane (1 << 16) -#define SUPPORTED_1000baseKX_Full (1 << 17) -#define SUPPORTED_10000baseKX4_Full (1 << 18) -#define SUPPORTED_10000baseKR_Full (1 << 19) -#define SUPPORTED_10000baseR_FEC (1 << 20) -#define SUPPORTED_20000baseMLD2_Full (1 << 21) -#define SUPPORTED_20000baseKR2_Full (1 << 22) -#define SUPPORTED_40000baseKR4_Full (1 << 23) -#define SUPPORTED_40000baseCR4_Full (1 << 24) -#define SUPPORTED_40000baseSR4_Full (1 << 25) -#define SUPPORTED_40000baseLR4_Full (1 << 26) - -/* Indicates what features are advertised by the interface. */ -#define ADVERTISED_10baseT_Half (1 << 0) -#define ADVERTISED_10baseT_Full (1 << 1) -#define ADVERTISED_100baseT_Half (1 << 2) -#define ADVERTISED_100baseT_Full (1 << 3) -#define ADVERTISED_1000baseT_Half (1 << 4) -#define ADVERTISED_1000baseT_Full (1 << 5) -#define ADVERTISED_Autoneg (1 << 6) -#define ADVERTISED_TP (1 << 7) -#define ADVERTISED_AUI (1 << 8) -#define ADVERTISED_MII (1 << 9) -#define ADVERTISED_FIBRE (1 << 10) -#define ADVERTISED_BNC (1 << 11) -#define ADVERTISED_10000baseT_Full (1 << 12) -#define ADVERTISED_Pause (1 << 13) -#define ADVERTISED_Asym_Pause (1 << 14) -#define ADVERTISED_2500baseX_Full (1 << 15) -#define ADVERTISED_Backplane (1 << 16) -#define ADVERTISED_1000baseKX_Full (1 << 17) -#define ADVERTISED_10000baseKX4_Full (1 << 18) -#define ADVERTISED_10000baseKR_Full (1 << 19) -#define ADVERTISED_10000baseR_FEC (1 << 20) -#define ADVERTISED_20000baseMLD2_Full (1 << 21) -#define ADVERTISED_20000baseKR2_Full (1 << 22) -#define ADVERTISED_40000baseKR4_Full (1 << 23) -#define ADVERTISED_40000baseCR4_Full (1 << 24) -#define ADVERTISED_40000baseSR4_Full (1 << 25) -#define ADVERTISED_40000baseLR4_Full (1 << 26) - -/* The following are all involved in forcing a particular link - * mode for the device for setting things. When getting the - * devices settings, these indicate the current mode and whether - * it was forced up into this mode or autonegotiated. - */ - -/* The forced speed, 10Mb, 100Mb, gigabit, 2.5Gb, 10GbE. */ -#define SPEED_10 10 -#define SPEED_100 100 -#define SPEED_1000 1000 -#define SPEED_2500 2500 -#define SPEED_10000 10000 -#define SPEED_UNKNOWN -1 - -/* Duplex, half or full. */ -#define DUPLEX_HALF 0x00 -#define DUPLEX_FULL 0x01 -#define DUPLEX_UNKNOWN 0xff - -/* Which connector port. */ -#define PORT_TP 0x00 -#define PORT_AUI 0x01 -#define PORT_MII 0x02 -#define PORT_FIBRE 0x03 -#define PORT_BNC 0x04 -#define PORT_DA 0x05 -#define PORT_NONE 0xef -#define PORT_OTHER 0xff - -/* Which transceiver to use. */ -#define XCVR_INTERNAL 0x00 -#define XCVR_EXTERNAL 0x01 -#define XCVR_DUMMY1 0x02 -#define XCVR_DUMMY2 0x03 -#define XCVR_DUMMY3 0x04 - -/* Enable or disable autonegotiation. If this is set to enable, - * the forced link modes above are completely ignored. - */ -#define AUTONEG_DISABLE 0x00 -#define AUTONEG_ENABLE 0x01 - -/* MDI or MDI-X status/control - if MDI/MDI_X/AUTO is set then - * the driver is required to renegotiate link - */ -#define ETH_TP_MDI_INVALID 0x00 /* status: unknown; control: unsupported */ -#define ETH_TP_MDI 0x01 /* status: MDI; control: force MDI */ -#define ETH_TP_MDI_X 0x02 /* status: MDI-X; control: force MDI-X */ -#define ETH_TP_MDI_AUTO 0x03 /* control: auto-select */ - -/* Wake-On-Lan options. */ -#define WAKE_PHY (1 << 0) -#define WAKE_UCAST (1 << 1) -#define WAKE_MCAST (1 << 2) -#define WAKE_BCAST (1 << 3) -#define WAKE_ARP (1 << 4) -#define WAKE_MAGIC (1 << 5) -#define WAKE_MAGICSECURE (1 << 6) /* only meaningful if WAKE_MAGIC */ - -/* L2-L4 network traffic flow types */ -#define TCP_V4_FLOW 0x01 /* hash or spec (tcp_ip4_spec) */ -#define UDP_V4_FLOW 0x02 /* hash or spec (udp_ip4_spec) */ -#define SCTP_V4_FLOW 0x03 /* hash or spec (sctp_ip4_spec) */ -#define AH_ESP_V4_FLOW 0x04 /* hash only */ -#define TCP_V6_FLOW 0x05 /* hash only */ -#define UDP_V6_FLOW 0x06 /* hash only */ -#define SCTP_V6_FLOW 0x07 /* hash only */ -#define AH_ESP_V6_FLOW 0x08 /* hash only */ -#define AH_V4_FLOW 0x09 /* hash or spec (ah_ip4_spec) */ -#define ESP_V4_FLOW 0x0a /* hash or spec (esp_ip4_spec) */ -#define AH_V6_FLOW 0x0b /* hash only */ -#define ESP_V6_FLOW 0x0c /* hash only */ -#define IP_USER_FLOW 0x0d /* spec only (usr_ip4_spec) */ -#define IPV4_FLOW 0x10 /* hash only */ -#define IPV6_FLOW 0x11 /* hash only */ -#define ETHER_FLOW 0x12 /* spec only (ether_spec) */ -/* Flag to enable additional fields in struct ethtool_rx_flow_spec */ -#define FLOW_EXT 0x80000000 - -/* L3-L4 network traffic flow hash options */ -#define RXH_L2DA (1 << 1) -#define RXH_VLAN (1 << 2) -#define RXH_L3_PROTO (1 << 3) -#define RXH_IP_SRC (1 << 4) -#define RXH_IP_DST (1 << 5) -#define RXH_L4_B_0_1 (1 << 6) /* src port in case of TCP/UDP/SCTP */ -#define RXH_L4_B_2_3 (1 << 7) /* dst port in case of TCP/UDP/SCTP */ -#define RXH_DISCARD (1 << 31) - -#define RX_CLS_FLOW_DISC 0xffffffffffffffffULL - -/* Special RX classification rule insert location values */ -#define RX_CLS_LOC_SPECIAL 0x80000000 /* flag */ -#define RX_CLS_LOC_ANY 0xffffffff -#define RX_CLS_LOC_FIRST 0xfffffffe -#define RX_CLS_LOC_LAST 0xfffffffd - -/* EEPROM Standards for plug in modules */ -#define ETH_MODULE_SFF_8079 0x1 -#define ETH_MODULE_SFF_8079_LEN 256 -#define ETH_MODULE_SFF_8472 0x2 -#define ETH_MODULE_SFF_8472_LEN 512 - -/* Reset flags */ -/* The reset() operation must clear the flags for the components which - * were actually reset. On successful return, the flags indicate the - * components which were not reset, either because they do not exist - * in the hardware or because they cannot be reset independently. The - * driver must never reset any components that were not requested. - */ -enum ethtool_reset_flags { - /* These flags represent components dedicated to the interface - * the command is addressed to. Shift any flag left by - * ETH_RESET_SHARED_SHIFT to reset a shared component of the - * same type. - */ - ETH_RESET_MGMT = 1 << 0, /* Management processor */ - ETH_RESET_IRQ = 1 << 1, /* Interrupt requester */ - ETH_RESET_DMA = 1 << 2, /* DMA engine */ - ETH_RESET_FILTER = 1 << 3, /* Filtering/flow direction */ - ETH_RESET_OFFLOAD = 1 << 4, /* Protocol offload */ - ETH_RESET_MAC = 1 << 5, /* Media access controller */ - ETH_RESET_PHY = 1 << 6, /* Transceiver/PHY */ - ETH_RESET_RAM = 1 << 7, /* RAM shared between - * multiple components */ - - ETH_RESET_DEDICATED = 0x0000ffff, /* All components dedicated to - * this interface */ - ETH_RESET_ALL = 0xffffffff, /* All components used by this - * interface, even if shared */ -}; -#define ETH_RESET_SHARED_SHIFT 16 - #endif /* _LINUX_ETHTOOL_H */ diff --git a/include/linux/eventpoll.h b/include/linux/eventpoll.h index 41085d0f395..6daf6d4971f 100644 --- a/include/linux/eventpoll.h +++ b/include/linux/eventpoll.h @@ -10,59 +10,11 @@ * Davide Libenzi <davidel@xmailserver.org> * */ - #ifndef _LINUX_EVENTPOLL_H #define _LINUX_EVENTPOLL_H -/* For O_CLOEXEC */ -#include <linux/fcntl.h> -#include <linux/types.h> - -/* Flags for epoll_create1. */ -#define EPOLL_CLOEXEC O_CLOEXEC - -/* Valid opcodes to issue to sys_epoll_ctl() */ -#define EPOLL_CTL_ADD 1 -#define EPOLL_CTL_DEL 2 -#define EPOLL_CTL_MOD 3 -#define EPOLL_CTL_DISABLE 4 - -/* - * Request the handling of system wakeup events so as to prevent system suspends - * from happening while those events are being processed. - * - * Assuming neither EPOLLET nor EPOLLONESHOT is set, system suspends will not be - * re-allowed until epoll_wait is called again after consuming the wakeup - * event(s). - * - * Requires CAP_BLOCK_SUSPEND - */ -#define EPOLLWAKEUP (1 << 29) - -/* Set the One Shot behaviour for the target file descriptor */ -#define EPOLLONESHOT (1 << 30) +#include <uapi/linux/eventpoll.h> -/* Set the Edge Triggered behaviour for the target file descriptor */ -#define EPOLLET (1 << 31) - -/* - * On x86-64 make the 64bit structure have the same alignment as the - * 32bit structure. This makes 32bit emulation easier. - * - * UML/x86_64 needs the same packing as x86_64 - */ -#ifdef __x86_64__ -#define EPOLL_PACKED __attribute__((packed)) -#else -#define EPOLL_PACKED -#endif - -struct epoll_event { - __u32 events; - __u64 data; -} EPOLL_PACKED; - -#ifdef __KERNEL__ /* Forward declarations to avoid compiler errors */ struct file; @@ -116,7 +68,4 @@ static inline void eventpoll_release(struct file *file) {} #endif -#endif /* #ifdef __KERNEL__ */ - #endif /* #ifndef _LINUX_EVENTPOLL_H */ - diff --git a/include/linux/falloc.h b/include/linux/falloc.h index d39b824a780..31591686ac2 100644 --- a/include/linux/falloc.h +++ b/include/linux/falloc.h @@ -1,11 +1,8 @@ #ifndef _FALLOC_H_ #define _FALLOC_H_ -#define FALLOC_FL_KEEP_SIZE 0x01 /* default is extend size */ -#define FALLOC_FL_PUNCH_HOLE 0x02 /* de-allocates range */ -#define FALLOC_FL_NO_HIDE_STALE 0x04 /* reserved codepoint */ +#include <uapi/linux/falloc.h> -#ifdef __KERNEL__ /* * Space reservation ioctls and argument structure @@ -24,6 +21,4 @@ struct space_resv { #define FS_IOC_RESVSP _IOW('X', 40, struct space_resv) #define FS_IOC_RESVSP64 _IOW('X', 42, struct space_resv) -#endif /* __KERNEL__ */ - #endif /* _FALLOC_H_ */ diff --git a/include/linux/fanotify.h b/include/linux/fanotify.h index 6c6133f76e1..cef93ddcc5a 100644 --- a/include/linux/fanotify.h +++ b/include/linux/fanotify.h @@ -1,120 +1,8 @@ #ifndef _LINUX_FANOTIFY_H #define _LINUX_FANOTIFY_H -#include <linux/types.h> +#include <uapi/linux/fanotify.h> -/* the following events that user-space can register for */ -#define FAN_ACCESS 0x00000001 /* File was accessed */ -#define FAN_MODIFY 0x00000002 /* File was modified */ -#define FAN_CLOSE_WRITE 0x00000008 /* Writtable file closed */ -#define FAN_CLOSE_NOWRITE 0x00000010 /* Unwrittable file closed */ -#define FAN_OPEN 0x00000020 /* File was opened */ - -#define FAN_Q_OVERFLOW 0x00004000 /* Event queued overflowed */ - -#define FAN_OPEN_PERM 0x00010000 /* File open in perm check */ -#define FAN_ACCESS_PERM 0x00020000 /* File accessed in perm check */ - -#define FAN_ONDIR 0x40000000 /* event occurred against dir */ - -#define FAN_EVENT_ON_CHILD 0x08000000 /* interested in child events */ - -/* helper events */ -#define FAN_CLOSE (FAN_CLOSE_WRITE | FAN_CLOSE_NOWRITE) /* close */ - -/* flags used for fanotify_init() */ -#define FAN_CLOEXEC 0x00000001 -#define FAN_NONBLOCK 0x00000002 - -/* These are NOT bitwise flags. Both bits are used togther. */ -#define FAN_CLASS_NOTIF 0x00000000 -#define FAN_CLASS_CONTENT 0x00000004 -#define FAN_CLASS_PRE_CONTENT 0x00000008 -#define FAN_ALL_CLASS_BITS (FAN_CLASS_NOTIF | FAN_CLASS_CONTENT | \ - FAN_CLASS_PRE_CONTENT) - -#define FAN_UNLIMITED_QUEUE 0x00000010 -#define FAN_UNLIMITED_MARKS 0x00000020 - -#define FAN_ALL_INIT_FLAGS (FAN_CLOEXEC | FAN_NONBLOCK | \ - FAN_ALL_CLASS_BITS | FAN_UNLIMITED_QUEUE |\ - FAN_UNLIMITED_MARKS) - -/* flags used for fanotify_modify_mark() */ -#define FAN_MARK_ADD 0x00000001 -#define FAN_MARK_REMOVE 0x00000002 -#define FAN_MARK_DONT_FOLLOW 0x00000004 -#define FAN_MARK_ONLYDIR 0x00000008 -#define FAN_MARK_MOUNT 0x00000010 -#define FAN_MARK_IGNORED_MASK 0x00000020 -#define FAN_MARK_IGNORED_SURV_MODIFY 0x00000040 -#define FAN_MARK_FLUSH 0x00000080 -#ifdef __KERNEL__ /* not valid from userspace, only kernel internal */ #define FAN_MARK_ONDIR 0x00000100 -#endif - -#define FAN_ALL_MARK_FLAGS (FAN_MARK_ADD |\ - FAN_MARK_REMOVE |\ - FAN_MARK_DONT_FOLLOW |\ - FAN_MARK_ONLYDIR |\ - FAN_MARK_MOUNT |\ - FAN_MARK_IGNORED_MASK |\ - FAN_MARK_IGNORED_SURV_MODIFY |\ - FAN_MARK_FLUSH) - -/* - * All of the events - we build the list by hand so that we can add flags in - * the future and not break backward compatibility. Apps will get only the - * events that they originally wanted. Be sure to add new events here! - */ -#define FAN_ALL_EVENTS (FAN_ACCESS |\ - FAN_MODIFY |\ - FAN_CLOSE |\ - FAN_OPEN) - -/* - * All events which require a permission response from userspace - */ -#define FAN_ALL_PERM_EVENTS (FAN_OPEN_PERM |\ - FAN_ACCESS_PERM) - -#define FAN_ALL_OUTGOING_EVENTS (FAN_ALL_EVENTS |\ - FAN_ALL_PERM_EVENTS |\ - FAN_Q_OVERFLOW) - -#define FANOTIFY_METADATA_VERSION 3 - -struct fanotify_event_metadata { - __u32 event_len; - __u8 vers; - __u8 reserved; - __u16 metadata_len; - __aligned_u64 mask; - __s32 fd; - __s32 pid; -}; - -struct fanotify_response { - __s32 fd; - __u32 response; -}; - -/* Legit userspace responses to a _PERM event */ -#define FAN_ALLOW 0x01 -#define FAN_DENY 0x02 -/* No fd set in event */ -#define FAN_NOFD -1 - -/* Helper functions to deal with fanotify_event_metadata buffers */ -#define FAN_EVENT_METADATA_LEN (sizeof(struct fanotify_event_metadata)) - -#define FAN_EVENT_NEXT(meta, len) ((len) -= (meta)->event_len, \ - (struct fanotify_event_metadata*)(((char *)(meta)) + \ - (meta)->event_len)) - -#define FAN_EVENT_OK(meta, len) ((long)(len) >= (long)FAN_EVENT_METADATA_LEN && \ - (long)(meta)->event_len >= (long)FAN_EVENT_METADATA_LEN && \ - (long)(meta)->event_len <= (long)(len)) - #endif /* _LINUX_FANOTIFY_H */ diff --git a/include/linux/fb.h b/include/linux/fb.h index ac3f1c60584..c7a95714b1f 100644 --- a/include/linux/fb.h +++ b/include/linux/fb.h @@ -1,409 +1,10 @@ #ifndef _LINUX_FB_H #define _LINUX_FB_H -#include <linux/types.h> -#include <linux/i2c.h> -#ifdef __KERNEL__ #include <linux/kgdb.h> -#endif /* __KERNEL__ */ +#include <uapi/linux/fb.h> -/* Definitions of frame buffers */ - -#define FB_MAX 32 /* sufficient for now */ - -/* ioctls - 0x46 is 'F' */ -#define FBIOGET_VSCREENINFO 0x4600 -#define FBIOPUT_VSCREENINFO 0x4601 -#define FBIOGET_FSCREENINFO 0x4602 -#define FBIOGETCMAP 0x4604 -#define FBIOPUTCMAP 0x4605 -#define FBIOPAN_DISPLAY 0x4606 -#ifdef __KERNEL__ #define FBIO_CURSOR _IOWR('F', 0x08, struct fb_cursor_user) -#else -#define FBIO_CURSOR _IOWR('F', 0x08, struct fb_cursor) -#endif -/* 0x4607-0x460B are defined below */ -/* #define FBIOGET_MONITORSPEC 0x460C */ -/* #define FBIOPUT_MONITORSPEC 0x460D */ -/* #define FBIOSWITCH_MONIBIT 0x460E */ -#define FBIOGET_CON2FBMAP 0x460F -#define FBIOPUT_CON2FBMAP 0x4610 -#define FBIOBLANK 0x4611 /* arg: 0 or vesa level + 1 */ -#define FBIOGET_VBLANK _IOR('F', 0x12, struct fb_vblank) -#define FBIO_ALLOC 0x4613 -#define FBIO_FREE 0x4614 -#define FBIOGET_GLYPH 0x4615 -#define FBIOGET_HWCINFO 0x4616 -#define FBIOPUT_MODEINFO 0x4617 -#define FBIOGET_DISPINFO 0x4618 -#define FBIO_WAITFORVSYNC _IOW('F', 0x20, __u32) - -#define FB_TYPE_PACKED_PIXELS 0 /* Packed Pixels */ -#define FB_TYPE_PLANES 1 /* Non interleaved planes */ -#define FB_TYPE_INTERLEAVED_PLANES 2 /* Interleaved planes */ -#define FB_TYPE_TEXT 3 /* Text/attributes */ -#define FB_TYPE_VGA_PLANES 4 /* EGA/VGA planes */ -#define FB_TYPE_FOURCC 5 /* Type identified by a V4L2 FOURCC */ - -#define FB_AUX_TEXT_MDA 0 /* Monochrome text */ -#define FB_AUX_TEXT_CGA 1 /* CGA/EGA/VGA Color text */ -#define FB_AUX_TEXT_S3_MMIO 2 /* S3 MMIO fasttext */ -#define FB_AUX_TEXT_MGA_STEP16 3 /* MGA Millenium I: text, attr, 14 reserved bytes */ -#define FB_AUX_TEXT_MGA_STEP8 4 /* other MGAs: text, attr, 6 reserved bytes */ -#define FB_AUX_TEXT_SVGA_GROUP 8 /* 8-15: SVGA tileblit compatible modes */ -#define FB_AUX_TEXT_SVGA_MASK 7 /* lower three bits says step */ -#define FB_AUX_TEXT_SVGA_STEP2 8 /* SVGA text mode: text, attr */ -#define FB_AUX_TEXT_SVGA_STEP4 9 /* SVGA text mode: text, attr, 2 reserved bytes */ -#define FB_AUX_TEXT_SVGA_STEP8 10 /* SVGA text mode: text, attr, 6 reserved bytes */ -#define FB_AUX_TEXT_SVGA_STEP16 11 /* SVGA text mode: text, attr, 14 reserved bytes */ -#define FB_AUX_TEXT_SVGA_LAST 15 /* reserved up to 15 */ - -#define FB_AUX_VGA_PLANES_VGA4 0 /* 16 color planes (EGA/VGA) */ -#define FB_AUX_VGA_PLANES_CFB4 1 /* CFB4 in planes (VGA) */ -#define FB_AUX_VGA_PLANES_CFB8 2 /* CFB8 in planes (VGA) */ - -#define FB_VISUAL_MONO01 0 /* Monochr. 1=Black 0=White */ -#define FB_VISUAL_MONO10 1 /* Monochr. 1=White 0=Black */ -#define FB_VISUAL_TRUECOLOR 2 /* True color */ -#define FB_VISUAL_PSEUDOCOLOR 3 /* Pseudo color (like atari) */ -#define FB_VISUAL_DIRECTCOLOR 4 /* Direct color */ -#define FB_VISUAL_STATIC_PSEUDOCOLOR 5 /* Pseudo color readonly */ -#define FB_VISUAL_FOURCC 6 /* Visual identified by a V4L2 FOURCC */ - -#define FB_ACCEL_NONE 0 /* no hardware accelerator */ -#define FB_ACCEL_ATARIBLITT 1 /* Atari Blitter */ -#define FB_ACCEL_AMIGABLITT 2 /* Amiga Blitter */ -#define FB_ACCEL_S3_TRIO64 3 /* Cybervision64 (S3 Trio64) */ -#define FB_ACCEL_NCR_77C32BLT 4 /* RetinaZ3 (NCR 77C32BLT) */ -#define FB_ACCEL_S3_VIRGE 5 /* Cybervision64/3D (S3 ViRGE) */ -#define FB_ACCEL_ATI_MACH64GX 6 /* ATI Mach 64GX family */ -#define FB_ACCEL_DEC_TGA 7 /* DEC 21030 TGA */ -#define FB_ACCEL_ATI_MACH64CT 8 /* ATI Mach 64CT family */ -#define FB_ACCEL_ATI_MACH64VT 9 /* ATI Mach 64CT family VT class */ -#define FB_ACCEL_ATI_MACH64GT 10 /* ATI Mach 64CT family GT class */ -#define FB_ACCEL_SUN_CREATOR 11 /* Sun Creator/Creator3D */ -#define FB_ACCEL_SUN_CGSIX 12 /* Sun cg6 */ -#define FB_ACCEL_SUN_LEO 13 /* Sun leo/zx */ -#define FB_ACCEL_IMS_TWINTURBO 14 /* IMS Twin Turbo */ -#define FB_ACCEL_3DLABS_PERMEDIA2 15 /* 3Dlabs Permedia 2 */ -#define FB_ACCEL_MATROX_MGA2064W 16 /* Matrox MGA2064W (Millenium) */ -#define FB_ACCEL_MATROX_MGA1064SG 17 /* Matrox MGA1064SG (Mystique) */ -#define FB_ACCEL_MATROX_MGA2164W 18 /* Matrox MGA2164W (Millenium II) */ -#define FB_ACCEL_MATROX_MGA2164W_AGP 19 /* Matrox MGA2164W (Millenium II) */ -#define FB_ACCEL_MATROX_MGAG100 20 /* Matrox G100 (Productiva G100) */ -#define FB_ACCEL_MATROX_MGAG200 21 /* Matrox G200 (Myst, Mill, ...) */ -#define FB_ACCEL_SUN_CG14 22 /* Sun cgfourteen */ -#define FB_ACCEL_SUN_BWTWO 23 /* Sun bwtwo */ -#define FB_ACCEL_SUN_CGTHREE 24 /* Sun cgthree */ -#define FB_ACCEL_SUN_TCX 25 /* Sun tcx */ -#define FB_ACCEL_MATROX_MGAG400 26 /* Matrox G400 */ -#define FB_ACCEL_NV3 27 /* nVidia RIVA 128 */ -#define FB_ACCEL_NV4 28 /* nVidia RIVA TNT */ -#define FB_ACCEL_NV5 29 /* nVidia RIVA TNT2 */ -#define FB_ACCEL_CT_6555x 30 /* C&T 6555x */ -#define FB_ACCEL_3DFX_BANSHEE 31 /* 3Dfx Banshee */ -#define FB_ACCEL_ATI_RAGE128 32 /* ATI Rage128 family */ -#define FB_ACCEL_IGS_CYBER2000 33 /* CyberPro 2000 */ -#define FB_ACCEL_IGS_CYBER2010 34 /* CyberPro 2010 */ -#define FB_ACCEL_IGS_CYBER5000 35 /* CyberPro 5000 */ -#define FB_ACCEL_SIS_GLAMOUR 36 /* SiS 300/630/540 */ -#define FB_ACCEL_3DLABS_PERMEDIA3 37 /* 3Dlabs Permedia 3 */ -#define FB_ACCEL_ATI_RADEON 38 /* ATI Radeon family */ -#define FB_ACCEL_I810 39 /* Intel 810/815 */ -#define FB_ACCEL_SIS_GLAMOUR_2 40 /* SiS 315, 650, 740 */ -#define FB_ACCEL_SIS_XABRE 41 /* SiS 330 ("Xabre") */ -#define FB_ACCEL_I830 42 /* Intel 830M/845G/85x/865G */ -#define FB_ACCEL_NV_10 43 /* nVidia Arch 10 */ -#define FB_ACCEL_NV_20 44 /* nVidia Arch 20 */ -#define FB_ACCEL_NV_30 45 /* nVidia Arch 30 */ -#define FB_ACCEL_NV_40 46 /* nVidia Arch 40 */ -#define FB_ACCEL_XGI_VOLARI_V 47 /* XGI Volari V3XT, V5, V8 */ -#define FB_ACCEL_XGI_VOLARI_Z 48 /* XGI Volari Z7 */ -#define FB_ACCEL_OMAP1610 49 /* TI OMAP16xx */ -#define FB_ACCEL_TRIDENT_TGUI 50 /* Trident TGUI */ -#define FB_ACCEL_TRIDENT_3DIMAGE 51 /* Trident 3DImage */ -#define FB_ACCEL_TRIDENT_BLADE3D 52 /* Trident Blade3D */ -#define FB_ACCEL_TRIDENT_BLADEXP 53 /* Trident BladeXP */ -#define FB_ACCEL_CIRRUS_ALPINE 53 /* Cirrus Logic 543x/544x/5480 */ -#define FB_ACCEL_NEOMAGIC_NM2070 90 /* NeoMagic NM2070 */ -#define FB_ACCEL_NEOMAGIC_NM2090 91 /* NeoMagic NM2090 */ -#define FB_ACCEL_NEOMAGIC_NM2093 92 /* NeoMagic NM2093 */ -#define FB_ACCEL_NEOMAGIC_NM2097 93 /* NeoMagic NM2097 */ -#define FB_ACCEL_NEOMAGIC_NM2160 94 /* NeoMagic NM2160 */ -#define FB_ACCEL_NEOMAGIC_NM2200 95 /* NeoMagic NM2200 */ -#define FB_ACCEL_NEOMAGIC_NM2230 96 /* NeoMagic NM2230 */ -#define FB_ACCEL_NEOMAGIC_NM2360 97 /* NeoMagic NM2360 */ -#define FB_ACCEL_NEOMAGIC_NM2380 98 /* NeoMagic NM2380 */ -#define FB_ACCEL_PXA3XX 99 /* PXA3xx */ - -#define FB_ACCEL_SAVAGE4 0x80 /* S3 Savage4 */ -#define FB_ACCEL_SAVAGE3D 0x81 /* S3 Savage3D */ -#define FB_ACCEL_SAVAGE3D_MV 0x82 /* S3 Savage3D-MV */ -#define FB_ACCEL_SAVAGE2000 0x83 /* S3 Savage2000 */ -#define FB_ACCEL_SAVAGE_MX_MV 0x84 /* S3 Savage/MX-MV */ -#define FB_ACCEL_SAVAGE_MX 0x85 /* S3 Savage/MX */ -#define FB_ACCEL_SAVAGE_IX_MV 0x86 /* S3 Savage/IX-MV */ -#define FB_ACCEL_SAVAGE_IX 0x87 /* S3 Savage/IX */ -#define FB_ACCEL_PROSAVAGE_PM 0x88 /* S3 ProSavage PM133 */ -#define FB_ACCEL_PROSAVAGE_KM 0x89 /* S3 ProSavage KM133 */ -#define FB_ACCEL_S3TWISTER_P 0x8a /* S3 Twister */ -#define FB_ACCEL_S3TWISTER_K 0x8b /* S3 TwisterK */ -#define FB_ACCEL_SUPERSAVAGE 0x8c /* S3 Supersavage */ -#define FB_ACCEL_PROSAVAGE_DDR 0x8d /* S3 ProSavage DDR */ -#define FB_ACCEL_PROSAVAGE_DDRK 0x8e /* S3 ProSavage DDR-K */ - -#define FB_ACCEL_PUV3_UNIGFX 0xa0 /* PKUnity-v3 Unigfx */ - -#define FB_CAP_FOURCC 1 /* Device supports FOURCC-based formats */ - -struct fb_fix_screeninfo { - char id[16]; /* identification string eg "TT Builtin" */ - unsigned long smem_start; /* Start of frame buffer mem */ - /* (physical address) */ - __u32 smem_len; /* Length of frame buffer mem */ - __u32 type; /* see FB_TYPE_* */ - __u32 type_aux; /* Interleave for interleaved Planes */ - __u32 visual; /* see FB_VISUAL_* */ - __u16 xpanstep; /* zero if no hardware panning */ - __u16 ypanstep; /* zero if no hardware panning */ - __u16 ywrapstep; /* zero if no hardware ywrap */ - __u32 line_length; /* length of a line in bytes */ - unsigned long mmio_start; /* Start of Memory Mapped I/O */ - /* (physical address) */ - __u32 mmio_len; /* Length of Memory Mapped I/O */ - __u32 accel; /* Indicate to driver which */ - /* specific chip/card we have */ - __u16 capabilities; /* see FB_CAP_* */ - __u16 reserved[2]; /* Reserved for future compatibility */ -}; - -/* Interpretation of offset for color fields: All offsets are from the right, - * inside a "pixel" value, which is exactly 'bits_per_pixel' wide (means: you - * can use the offset as right argument to <<). A pixel afterwards is a bit - * stream and is written to video memory as that unmodified. - * - * For pseudocolor: offset and length should be the same for all color - * components. Offset specifies the position of the least significant bit - * of the pallette index in a pixel value. Length indicates the number - * of available palette entries (i.e. # of entries = 1 << length). - */ -struct fb_bitfield { - __u32 offset; /* beginning of bitfield */ - __u32 length; /* length of bitfield */ - __u32 msb_right; /* != 0 : Most significant bit is */ - /* right */ -}; - -#define FB_NONSTD_HAM 1 /* Hold-And-Modify (HAM) */ -#define FB_NONSTD_REV_PIX_IN_B 2 /* order of pixels in each byte is reversed */ - -#define FB_ACTIVATE_NOW 0 /* set values immediately (or vbl)*/ -#define FB_ACTIVATE_NXTOPEN 1 /* activate on next open */ -#define FB_ACTIVATE_TEST 2 /* don't set, round up impossible */ -#define FB_ACTIVATE_MASK 15 - /* values */ -#define FB_ACTIVATE_VBL 16 /* activate values on next vbl */ -#define FB_CHANGE_CMAP_VBL 32 /* change colormap on vbl */ -#define FB_ACTIVATE_ALL 64 /* change all VCs on this fb */ -#define FB_ACTIVATE_FORCE 128 /* force apply even when no change*/ -#define FB_ACTIVATE_INV_MODE 256 /* invalidate videomode */ - -#define FB_ACCELF_TEXT 1 /* (OBSOLETE) see fb_info.flags and vc_mode */ - -#define FB_SYNC_HOR_HIGH_ACT 1 /* horizontal sync high active */ -#define FB_SYNC_VERT_HIGH_ACT 2 /* vertical sync high active */ -#define FB_SYNC_EXT 4 /* external sync */ -#define FB_SYNC_COMP_HIGH_ACT 8 /* composite sync high active */ -#define FB_SYNC_BROADCAST 16 /* broadcast video timings */ - /* vtotal = 144d/288n/576i => PAL */ - /* vtotal = 121d/242n/484i => NTSC */ -#define FB_SYNC_ON_GREEN 32 /* sync on green */ - -#define FB_VMODE_NONINTERLACED 0 /* non interlaced */ -#define FB_VMODE_INTERLACED 1 /* interlaced */ -#define FB_VMODE_DOUBLE 2 /* double scan */ -#define FB_VMODE_ODD_FLD_FIRST 4 /* interlaced: top line first */ -#define FB_VMODE_MASK 255 - -#define FB_VMODE_YWRAP 256 /* ywrap instead of panning */ -#define FB_VMODE_SMOOTH_XPAN 512 /* smooth xpan possible (internally used) */ -#define FB_VMODE_CONUPDATE 512 /* don't update x/yoffset */ - -/* - * Display rotation support - */ -#define FB_ROTATE_UR 0 -#define FB_ROTATE_CW 1 -#define FB_ROTATE_UD 2 -#define FB_ROTATE_CCW 3 - -#define PICOS2KHZ(a) (1000000000UL/(a)) -#define KHZ2PICOS(a) (1000000000UL/(a)) - -struct fb_var_screeninfo { - __u32 xres; /* visible resolution */ - __u32 yres; - __u32 xres_virtual; /* virtual resolution */ - __u32 yres_virtual; - __u32 xoffset; /* offset from virtual to visible */ - __u32 yoffset; /* resolution */ - - __u32 bits_per_pixel; /* guess what */ - __u32 grayscale; /* 0 = color, 1 = grayscale, */ - /* >1 = FOURCC */ - struct fb_bitfield red; /* bitfield in fb mem if true color, */ - struct fb_bitfield green; /* else only length is significant */ - struct fb_bitfield blue; - struct fb_bitfield transp; /* transparency */ - - __u32 nonstd; /* != 0 Non standard pixel format */ - - __u32 activate; /* see FB_ACTIVATE_* */ - - __u32 height; /* height of picture in mm */ - __u32 width; /* width of picture in mm */ - - __u32 accel_flags; /* (OBSOLETE) see fb_info.flags */ - - /* Timing: All values in pixclocks, except pixclock (of course) */ - __u32 pixclock; /* pixel clock in ps (pico seconds) */ - __u32 left_margin; /* time from sync to picture */ - __u32 right_margin; /* time from picture to sync */ - __u32 upper_margin; /* time from sync to picture */ - __u32 lower_margin; - __u32 hsync_len; /* length of horizontal sync */ - __u32 vsync_len; /* length of vertical sync */ - __u32 sync; /* see FB_SYNC_* */ - __u32 vmode; /* see FB_VMODE_* */ - __u32 rotate; /* angle we rotate counter clockwise */ - __u32 colorspace; /* colorspace for FOURCC-based modes */ - __u32 reserved[4]; /* Reserved for future compatibility */ -}; - -struct fb_cmap { - __u32 start; /* First entry */ - __u32 len; /* Number of entries */ - __u16 *red; /* Red values */ - __u16 *green; - __u16 *blue; - __u16 *transp; /* transparency, can be NULL */ -}; - -struct fb_con2fbmap { - __u32 console; - __u32 framebuffer; -}; - -/* VESA Blanking Levels */ -#define VESA_NO_BLANKING 0 -#define VESA_VSYNC_SUSPEND 1 -#define VESA_HSYNC_SUSPEND 2 -#define VESA_POWERDOWN 3 - - -enum { - /* screen: unblanked, hsync: on, vsync: on */ - FB_BLANK_UNBLANK = VESA_NO_BLANKING, - - /* screen: blanked, hsync: on, vsync: on */ - FB_BLANK_NORMAL = VESA_NO_BLANKING + 1, - - /* screen: blanked, hsync: on, vsync: off */ - FB_BLANK_VSYNC_SUSPEND = VESA_VSYNC_SUSPEND + 1, - - /* screen: blanked, hsync: off, vsync: on */ - FB_BLANK_HSYNC_SUSPEND = VESA_HSYNC_SUSPEND + 1, - - /* screen: blanked, hsync: off, vsync: off */ - FB_BLANK_POWERDOWN = VESA_POWERDOWN + 1 -}; - -#define FB_VBLANK_VBLANKING 0x001 /* currently in a vertical blank */ -#define FB_VBLANK_HBLANKING 0x002 /* currently in a horizontal blank */ -#define FB_VBLANK_HAVE_VBLANK 0x004 /* vertical blanks can be detected */ -#define FB_VBLANK_HAVE_HBLANK 0x008 /* horizontal blanks can be detected */ -#define FB_VBLANK_HAVE_COUNT 0x010 /* global retrace counter is available */ -#define FB_VBLANK_HAVE_VCOUNT 0x020 /* the vcount field is valid */ -#define FB_VBLANK_HAVE_HCOUNT 0x040 /* the hcount field is valid */ -#define FB_VBLANK_VSYNCING 0x080 /* currently in a vsync */ -#define FB_VBLANK_HAVE_VSYNC 0x100 /* verical syncs can be detected */ - -struct fb_vblank { - __u32 flags; /* FB_VBLANK flags */ - __u32 count; /* counter of retraces since boot */ - __u32 vcount; /* current scanline position */ - __u32 hcount; /* current scandot position */ - __u32 reserved[4]; /* reserved for future compatibility */ -}; - -/* Internal HW accel */ -#define ROP_COPY 0 -#define ROP_XOR 1 - -struct fb_copyarea { - __u32 dx; - __u32 dy; - __u32 width; - __u32 height; - __u32 sx; - __u32 sy; -}; - -struct fb_fillrect { - __u32 dx; /* screen-relative */ - __u32 dy; - __u32 width; - __u32 height; - __u32 color; - __u32 rop; -}; - -struct fb_image { - __u32 dx; /* Where to place image */ - __u32 dy; - __u32 width; /* Size of image */ - __u32 height; - __u32 fg_color; /* Only used when a mono bitmap */ - __u32 bg_color; - __u8 depth; /* Depth of the image */ - const char *data; /* Pointer to image data */ - struct fb_cmap cmap; /* color map info */ -}; - -/* - * hardware cursor control - */ - -#define FB_CUR_SETIMAGE 0x01 -#define FB_CUR_SETPOS 0x02 -#define FB_CUR_SETHOT 0x04 -#define FB_CUR_SETCMAP 0x08 -#define FB_CUR_SETSHAPE 0x10 -#define FB_CUR_SETSIZE 0x20 -#define FB_CUR_SETALL 0xFF - -struct fbcurpos { - __u16 x, y; -}; - -struct fb_cursor { - __u16 set; /* what to set */ - __u16 enable; /* cursor on/off */ - __u16 rop; /* bitop operation */ - const char *mask; /* cursor mask bits */ - struct fbcurpos hot; /* cursor hot spot */ - struct fb_image image; /* Cursor image */ -}; - -#ifdef CONFIG_FB_BACKLIGHT -/* Settings for the generic backlight code */ -#define FB_BACKLIGHT_LEVELS 128 -#define FB_BACKLIGHT_MAX 0xFF -#endif - -#ifdef __KERNEL__ #include <linux/fs.h> #include <linux/init.h> @@ -1181,6 +782,4 @@ extern int fb_find_mode(struct fb_var_screeninfo *var, const struct fb_videomode *default_mode, unsigned int default_bpp); -#endif /* __KERNEL__ */ - #endif /* _LINUX_FB_H */ diff --git a/include/linux/fcntl.h b/include/linux/fcntl.h index f550f894ba1..76ce329e656 100644 --- a/include/linux/fcntl.h +++ b/include/linux/fcntl.h @@ -1,54 +1,8 @@ #ifndef _LINUX_FCNTL_H #define _LINUX_FCNTL_H -#include <asm/fcntl.h> +#include <uapi/linux/fcntl.h> -#define F_SETLEASE (F_LINUX_SPECIFIC_BASE + 0) -#define F_GETLEASE (F_LINUX_SPECIFIC_BASE + 1) - -/* - * Cancel a blocking posix lock; internal use only until we expose an - * asynchronous lock api to userspace: - */ -#define F_CANCELLK (F_LINUX_SPECIFIC_BASE + 5) - -/* Create a file descriptor with FD_CLOEXEC set. */ -#define F_DUPFD_CLOEXEC (F_LINUX_SPECIFIC_BASE + 6) - -/* - * Request nofications on a directory. - * See below for events that may be notified. - */ -#define F_NOTIFY (F_LINUX_SPECIFIC_BASE+2) - -/* - * Set and get of pipe page size array - */ -#define F_SETPIPE_SZ (F_LINUX_SPECIFIC_BASE + 7) -#define F_GETPIPE_SZ (F_LINUX_SPECIFIC_BASE + 8) - -/* - * Types of directory notifications that may be requested. - */ -#define DN_ACCESS 0x00000001 /* File accessed */ -#define DN_MODIFY 0x00000002 /* File modified */ -#define DN_CREATE 0x00000004 /* File created */ -#define DN_DELETE 0x00000008 /* File removed */ -#define DN_RENAME 0x00000010 /* File renamed */ -#define DN_ATTRIB 0x00000020 /* File changed attibutes */ -#define DN_MULTISHOT 0x80000000 /* Don't remove notifier */ - -#define AT_FDCWD -100 /* Special value used to indicate - openat should use the current - working directory. */ -#define AT_SYMLINK_NOFOLLOW 0x100 /* Do not follow symbolic links. */ -#define AT_REMOVEDIR 0x200 /* Remove directory instead of - unlinking file. */ -#define AT_SYMLINK_FOLLOW 0x400 /* Follow symbolic links. */ -#define AT_NO_AUTOMOUNT 0x800 /* Suppress terminal automount traversal */ -#define AT_EMPTY_PATH 0x1000 /* Allow empty relative pathname */ - -#ifdef __KERNEL__ #ifndef force_o_largefile #define force_o_largefile() (BITS_PER_LONG != 32) @@ -74,6 +28,4 @@ #define IS_SETLK(cmd) (IS_SETLK32(cmd) || IS_SETLK64(cmd)) #define IS_SETLKW(cmd) (IS_SETLKW32(cmd) || IS_SETLKW64(cmd)) -#endif /* __KERNEL__ */ - #endif diff --git a/include/linux/fd.h b/include/linux/fd.h index 72202b1b9a6..69275bccc3e 100644 --- a/include/linux/fd.h +++ b/include/linux/fd.h @@ -1,384 +1,8 @@ #ifndef _LINUX_FD_H #define _LINUX_FD_H -#include <linux/ioctl.h> -#include <linux/compiler.h> +#include <uapi/linux/fd.h> -/* New file layout: Now the ioctl definitions immediately follow the - * definitions of the structures that they use */ - -/* - * Geometry - */ -struct floppy_struct { - unsigned int size, /* nr of sectors total */ - sect, /* sectors per track */ - head, /* nr of heads */ - track, /* nr of tracks */ - stretch; /* bit 0 !=0 means double track steps */ - /* bit 1 != 0 means swap sides */ - /* bits 2..9 give the first sector */ - /* number (the LSB is flipped) */ -#define FD_STRETCH 1 -#define FD_SWAPSIDES 2 -#define FD_ZEROBASED 4 -#define FD_SECTBASEMASK 0x3FC -#define FD_MKSECTBASE(s) (((s) ^ 1) << 2) -#define FD_SECTBASE(floppy) ((((floppy)->stretch & FD_SECTBASEMASK) >> 2) ^ 1) - - unsigned char gap, /* gap1 size */ - - rate, /* data rate. |= 0x40 for perpendicular */ -#define FD_2M 0x4 -#define FD_SIZECODEMASK 0x38 -#define FD_SIZECODE(floppy) (((((floppy)->rate&FD_SIZECODEMASK)>> 3)+ 2) %8) -#define FD_SECTSIZE(floppy) ( (floppy)->rate & FD_2M ? \ - 512 : 128 << FD_SIZECODE(floppy) ) -#define FD_PERP 0x40 - - spec1, /* stepping rate, head unload time */ - fmt_gap; /* gap2 size */ - const char * name; /* used only for predefined formats */ -}; - - -/* commands needing write access have 0x40 set */ -/* commands needing super user access have 0x80 set */ - -#define FDCLRPRM _IO(2, 0x41) -/* clear user-defined parameters */ - -#define FDSETPRM _IOW(2, 0x42, struct floppy_struct) -#define FDSETMEDIAPRM FDSETPRM -/* set user-defined parameters for current media */ - -#define FDDEFPRM _IOW(2, 0x43, struct floppy_struct) -#define FDGETPRM _IOR(2, 0x04, struct floppy_struct) -#define FDDEFMEDIAPRM FDDEFPRM -#define FDGETMEDIAPRM FDGETPRM -/* set/get disk parameters */ - - -#define FDMSGON _IO(2,0x45) -#define FDMSGOFF _IO(2,0x46) -/* issue/don't issue kernel messages on media type change */ - - -/* - * Formatting (obsolete) - */ -#define FD_FILL_BYTE 0xF6 /* format fill byte. */ - -struct format_descr { - unsigned int device,head,track; -}; - -#define FDFMTBEG _IO(2,0x47) -/* begin formatting a disk */ -#define FDFMTTRK _IOW(2,0x48, struct format_descr) -/* format the specified track */ -#define FDFMTEND _IO(2,0x49) -/* end formatting a disk */ - - -/* - * Error thresholds - */ -struct floppy_max_errors { - unsigned int - abort, /* number of errors to be reached before aborting */ - read_track, /* maximal number of errors permitted to read an - * entire track at once */ - reset, /* maximal number of errors before a reset is tried */ - recal, /* maximal number of errors before a recalibrate is - * tried */ - - /* - * Threshold for reporting FDC errors to the console. - * Setting this to zero may flood your screen when using - * ultra cheap floppies ;-) - */ - reporting; - -}; - -#define FDSETEMSGTRESH _IO(2,0x4a) -/* set fdc error reporting threshold */ - -#define FDFLUSH _IO(2,0x4b) -/* flush buffers for media; either for verifying media, or for - * handling a media change without closing the file descriptor */ - -#define FDSETMAXERRS _IOW(2, 0x4c, struct floppy_max_errors) -#define FDGETMAXERRS _IOR(2, 0x0e, struct floppy_max_errors) -/* set/get abortion and read_track threshold. See also floppy_drive_params - * structure */ - - -typedef char floppy_drive_name[16]; -#define FDGETDRVTYP _IOR(2, 0x0f, floppy_drive_name) -/* get drive type: 5 1/4 or 3 1/2 */ - - -/* - * Drive parameters (user modifiable) - */ -struct floppy_drive_params { - signed char cmos; /* CMOS type */ - - /* Spec2 is (HLD<<1 | ND), where HLD is head load time (1=2ms, 2=4 ms - * etc) and ND is set means no DMA. Hardcoded to 6 (HLD=6ms, use DMA). - */ - unsigned long max_dtr; /* Step rate, usec */ - unsigned long hlt; /* Head load/settle time, msec */ - unsigned long hut; /* Head unload time (remnant of - * 8" drives) */ - unsigned long srt; /* Step rate, usec */ - - unsigned long spinup; /* time needed for spinup (expressed - * in jiffies) */ - unsigned long spindown; /* timeout needed for spindown */ - unsigned char spindown_offset; /* decides in which position the disk - * will stop */ - unsigned char select_delay; /* delay to wait after select */ - unsigned char rps; /* rotations per second */ - unsigned char tracks; /* maximum number of tracks */ - unsigned long timeout; /* timeout for interrupt requests */ - - unsigned char interleave_sect; /* if there are more sectors, use - * interleave */ - - struct floppy_max_errors max_errors; - - char flags; /* various flags, including ftd_msg */ -/* - * Announce successful media type detection and media information loss after - * disk changes. - * Also used to enable/disable printing of overrun warnings. - */ - -#define FTD_MSG 0x10 -#define FD_BROKEN_DCL 0x20 -#define FD_DEBUG 0x02 -#define FD_SILENT_DCL_CLEAR 0x4 -#define FD_INVERTED_DCL 0x80 /* must be 0x80, because of hardware - considerations */ - - char read_track; /* use readtrack during probing? */ - -/* - * Auto-detection. Each drive type has eight formats which are - * used in succession to try to read the disk. If the FDC cannot lock onto - * the disk, the next format is tried. This uses the variable 'probing'. - */ - short autodetect[8]; /* autodetected formats */ - - int checkfreq; /* how often should the drive be checked for disk - * changes */ - int native_format; /* native format of this drive */ -}; - -enum { - FD_NEED_TWADDLE_BIT, /* more magic */ - FD_VERIFY_BIT, /* inquire for write protection */ - FD_DISK_NEWCHANGE_BIT, /* change detected, and no action undertaken yet - * to clear media change status */ - FD_UNUSED_BIT, - FD_DISK_CHANGED_BIT, /* disk has been changed since last i/o */ - FD_DISK_WRITABLE_BIT /* disk is writable */ -}; - -#define FDSETDRVPRM _IOW(2, 0x90, struct floppy_drive_params) -#define FDGETDRVPRM _IOR(2, 0x11, struct floppy_drive_params) -/* set/get drive parameters */ - - -/* - * Current drive state (not directly modifiable by user, readonly) - */ -struct floppy_drive_struct { - unsigned long flags; -/* values for these flags */ -#define FD_NEED_TWADDLE (1 << FD_NEED_TWADDLE_BIT) -#define FD_VERIFY (1 << FD_VERIFY_BIT) -#define FD_DISK_NEWCHANGE (1 << FD_DISK_NEWCHANGE_BIT) -#define FD_DISK_CHANGED (1 << FD_DISK_CHANGED_BIT) -#define FD_DISK_WRITABLE (1 << FD_DISK_WRITABLE_BIT) - - unsigned long spinup_date; - unsigned long select_date; - unsigned long first_read_date; - short probed_format; - short track; /* current track */ - short maxblock; /* id of highest block read */ - short maxtrack; /* id of highest half track read */ - int generation; /* how many diskchanges? */ - -/* - * (User-provided) media information is _not_ discarded after a media change - * if the corresponding keep_data flag is non-zero. Positive values are - * decremented after each probe. - */ - int keep_data; - - /* Prevent "aliased" accesses. */ - int fd_ref; - int fd_device; - unsigned long last_checked; /* when was the drive last checked for a disk - * change? */ - - char *dmabuf; - int bufblocks; -}; - -#define FDGETDRVSTAT _IOR(2, 0x12, struct floppy_drive_struct) -#define FDPOLLDRVSTAT _IOR(2, 0x13, struct floppy_drive_struct) -/* get drive state: GET returns the cached state, POLL polls for new state */ - - -/* - * reset FDC - */ -enum reset_mode { - FD_RESET_IF_NEEDED, /* reset only if the reset flags is set */ - FD_RESET_IF_RAWCMD, /* obsolete */ - FD_RESET_ALWAYS /* reset always */ -}; -#define FDRESET _IO(2, 0x54) - - -/* - * FDC state - */ -struct floppy_fdc_state { - int spec1; /* spec1 value last used */ - int spec2; /* spec2 value last used */ - int dtr; - unsigned char version; /* FDC version code */ - unsigned char dor; - unsigned long address; /* io address */ - unsigned int rawcmd:2; - unsigned int reset:1; - unsigned int need_configure:1; - unsigned int perp_mode:2; - unsigned int has_fifo:1; - unsigned int driver_version; /* version code for floppy driver */ -#define FD_DRIVER_VERSION 0x100 -/* user programs using the floppy API should use floppy_fdc_state to - * get the version number of the floppy driver that they are running - * on. If this version number is bigger than the one compiled into the - * user program (the FD_DRIVER_VERSION define), it should be prepared - * to bigger structures - */ - - unsigned char track[4]; - /* Position of the heads of the 4 units attached to this FDC, - * as stored on the FDC. In the future, the position as stored - * on the FDC might not agree with the actual physical - * position of these drive heads. By allowing such - * disagreement, it will be possible to reset the FDC without - * incurring the expensive cost of repositioning all heads. - * Right now, these positions are hard wired to 0. */ - -}; - -#define FDGETFDCSTAT _IOR(2, 0x15, struct floppy_fdc_state) - - -/* - * Asynchronous Write error tracking - */ -struct floppy_write_errors { - /* Write error logging. - * - * These fields can be cleared with the FDWERRORCLR ioctl. - * Only writes that were attempted but failed due to a physical media - * error are logged. write(2) calls that fail and return an error code - * to the user process are not counted. - */ - - unsigned int write_errors; /* number of physical write errors - * encountered */ - - /* position of first and last write errors */ - unsigned long first_error_sector; - int first_error_generation; - unsigned long last_error_sector; - int last_error_generation; - - unsigned int badness; /* highest retry count for a read or write - * operation */ -}; - -#define FDWERRORCLR _IO(2, 0x56) -/* clear write error and badness information */ -#define FDWERRORGET _IOR(2, 0x17, struct floppy_write_errors) -/* get write error and badness information */ - - -/* - * Raw commands - */ -/* new interface flag: now we can do them in batches */ -#define FDHAVEBATCHEDRAWCMD - -struct floppy_raw_cmd { - unsigned int flags; -#define FD_RAW_READ 1 -#define FD_RAW_WRITE 2 -#define FD_RAW_NO_MOTOR 4 -#define FD_RAW_DISK_CHANGE 4 /* out: disk change flag was set */ -#define FD_RAW_INTR 8 /* wait for an interrupt */ -#define FD_RAW_SPIN 0x10 /* spin up the disk for this command */ -#define FD_RAW_NO_MOTOR_AFTER 0x20 /* switch the motor off after command - * completion */ -#define FD_RAW_NEED_DISK 0x40 /* this command needs a disk to be present */ -#define FD_RAW_NEED_SEEK 0x80 /* this command uses an implied seek (soft) */ - -/* more "in" flags */ -#define FD_RAW_MORE 0x100 /* more records follow */ -#define FD_RAW_STOP_IF_FAILURE 0x200 /* stop if we encounter a failure */ -#define FD_RAW_STOP_IF_SUCCESS 0x400 /* stop if command successful */ -#define FD_RAW_SOFTFAILURE 0x800 /* consider the return value for failure - * detection too */ - -/* more "out" flags */ -#define FD_RAW_FAILURE 0x10000 /* command sent to fdc, fdc returned error */ -#define FD_RAW_HARDFAILURE 0x20000 /* fdc had to be reset, or timed out */ - - void __user *data; - char *kernel_data; /* location of data buffer in the kernel */ - struct floppy_raw_cmd *next; /* used for chaining of raw cmd's - * within the kernel */ - long length; /* in: length of dma transfer. out: remaining bytes */ - long phys_length; /* physical length, if different from dma length */ - int buffer_length; /* length of allocated buffer */ - - unsigned char rate; - unsigned char cmd_count; - unsigned char cmd[16]; - unsigned char reply_count; - unsigned char reply[16]; - int track; - int resultcode; - - int reserved1; - int reserved2; -}; - -#define FDRAWCMD _IO(2, 0x58) -/* send a raw command to the fdc. Structure size not included, because of - * batches */ - -#define FDTWADDLE _IO(2, 0x59) -/* flicker motor-on bit before reading a sector. Experimental */ - - -#define FDEJECT _IO(2, 0x5a) -/* eject the disk */ - - -#ifdef __KERNEL__ #ifdef CONFIG_COMPAT #include <linux/compat.h> @@ -398,5 +22,3 @@ struct compat_floppy_struct { #define FDGETPRM32 _IOR(2, 0x04, struct compat_floppy_struct) #endif #endif - -#endif diff --git a/include/linux/filter.h b/include/linux/filter.h index 2ded090e10f..24d251f3bab 100644 --- a/include/linux/filter.h +++ b/include/linux/filter.h @@ -1,141 +1,12 @@ /* * Linux Socket Filter Data Structures */ - #ifndef __LINUX_FILTER_H__ #define __LINUX_FILTER_H__ -#include <linux/compiler.h> -#include <linux/types.h> - -#ifdef __KERNEL__ #include <linux/atomic.h> #include <linux/compat.h> -#endif - -/* - * Current version of the filter code architecture. - */ -#define BPF_MAJOR_VERSION 1 -#define BPF_MINOR_VERSION 1 - -/* - * Try and keep these values and structures similar to BSD, especially - * the BPF code definitions which need to match so you can share filters - */ - -struct sock_filter { /* Filter block */ - __u16 code; /* Actual filter code */ - __u8 jt; /* Jump true */ - __u8 jf; /* Jump false */ - __u32 k; /* Generic multiuse field */ -}; - -struct sock_fprog { /* Required for SO_ATTACH_FILTER. */ - unsigned short len; /* Number of filter blocks */ - struct sock_filter __user *filter; -}; - -/* - * Instruction classes - */ - -#define BPF_CLASS(code) ((code) & 0x07) -#define BPF_LD 0x00 -#define BPF_LDX 0x01 -#define BPF_ST 0x02 -#define BPF_STX 0x03 -#define BPF_ALU 0x04 -#define BPF_JMP 0x05 -#define BPF_RET 0x06 -#define BPF_MISC 0x07 - -/* ld/ldx fields */ -#define BPF_SIZE(code) ((code) & 0x18) -#define BPF_W 0x00 -#define BPF_H 0x08 -#define BPF_B 0x10 -#define BPF_MODE(code) ((code) & 0xe0) -#define BPF_IMM 0x00 -#define BPF_ABS 0x20 -#define BPF_IND 0x40 -#define BPF_MEM 0x60 -#define BPF_LEN 0x80 -#define BPF_MSH 0xa0 - -/* alu/jmp fields */ -#define BPF_OP(code) ((code) & 0xf0) -#define BPF_ADD 0x00 -#define BPF_SUB 0x10 -#define BPF_MUL 0x20 -#define BPF_DIV 0x30 -#define BPF_OR 0x40 -#define BPF_AND 0x50 -#define BPF_LSH 0x60 -#define BPF_RSH 0x70 -#define BPF_NEG 0x80 -#define BPF_MOD 0x90 -#define BPF_XOR 0xa0 - -#define BPF_JA 0x00 -#define BPF_JEQ 0x10 -#define BPF_JGT 0x20 -#define BPF_JGE 0x30 -#define BPF_JSET 0x40 -#define BPF_SRC(code) ((code) & 0x08) -#define BPF_K 0x00 -#define BPF_X 0x08 - -/* ret - BPF_K and BPF_X also apply */ -#define BPF_RVAL(code) ((code) & 0x18) -#define BPF_A 0x10 - -/* misc */ -#define BPF_MISCOP(code) ((code) & 0xf8) -#define BPF_TAX 0x00 -#define BPF_TXA 0x80 - -#ifndef BPF_MAXINSNS -#define BPF_MAXINSNS 4096 -#endif - -/* - * Macros for filter block array initializers. - */ -#ifndef BPF_STMT -#define BPF_STMT(code, k) { (unsigned short)(code), 0, 0, k } -#endif -#ifndef BPF_JUMP -#define BPF_JUMP(code, k, jt, jf) { (unsigned short)(code), jt, jf, k } -#endif - -/* - * Number of scratch memory words for: BPF_ST and BPF_STX - */ -#define BPF_MEMWORDS 16 - -/* RATIONALE. Negative offsets are invalid in BPF. - We use them to reference ancillary data. - Unlike introduction new instructions, it does not break - existing compilers/optimizers. - */ -#define SKF_AD_OFF (-0x1000) -#define SKF_AD_PROTOCOL 0 -#define SKF_AD_PKTTYPE 4 -#define SKF_AD_IFINDEX 8 -#define SKF_AD_NLATTR 12 -#define SKF_AD_NLATTR_NEST 16 -#define SKF_AD_MARK 20 -#define SKF_AD_QUEUE 24 -#define SKF_AD_HATYPE 28 -#define SKF_AD_RXHASH 32 -#define SKF_AD_CPU 36 -#define SKF_AD_ALU_XOR_X 40 -#define SKF_AD_MAX 44 -#define SKF_NET_OFF (-0x100000) -#define SKF_LL_OFF (-0x200000) - -#ifdef __KERNEL__ +#include <uapi/linux/filter.h> #ifdef CONFIG_COMPAT /* @@ -254,6 +125,4 @@ enum { BPF_S_ANC_SECCOMP_LD_W, }; -#endif /* __KERNEL__ */ - #endif /* __LINUX_FILTER_H__ */ diff --git a/include/linux/flat.h b/include/linux/flat.h index ec56852e265..2c1eb15c4ba 100644 --- a/include/linux/flat.h +++ b/include/linux/flat.h @@ -6,58 +6,12 @@ * This file provides the definitions and structures needed to * support uClinux flat-format executables. */ - #ifndef _LINUX_FLAT_H #define _LINUX_FLAT_H -#ifdef __KERNEL__ #include <asm/flat.h> -#endif - -#define FLAT_VERSION 0x00000004L - -#ifdef CONFIG_BINFMT_SHARED_FLAT -#define MAX_SHARED_LIBS (4) -#else -#define MAX_SHARED_LIBS (1) -#endif - -/* - * To make everything easier to port and manage cross platform - * development, all fields are in network byte order. - */ +#include <uapi/linux/flat.h> -struct flat_hdr { - char magic[4]; - unsigned long rev; /* version (as above) */ - unsigned long entry; /* Offset of first executable instruction - with text segment from beginning of file */ - unsigned long data_start; /* Offset of data segment from beginning of - file */ - unsigned long data_end; /* Offset of end of data segment - from beginning of file */ - unsigned long bss_end; /* Offset of end of bss segment from beginning - of file */ - - /* (It is assumed that data_end through bss_end forms the bss segment.) */ - - unsigned long stack_size; /* Size of stack, in bytes */ - unsigned long reloc_start; /* Offset of relocation records from - beginning of file */ - unsigned long reloc_count; /* Number of relocation records */ - unsigned long flags; - unsigned long build_date; /* When the program/library was built */ - unsigned long filler[5]; /* Reservered, set to zero */ -}; - -#define FLAT_FLAG_RAM 0x0001 /* load program entirely into RAM */ -#define FLAT_FLAG_GOTPIC 0x0002 /* program is PIC with GOT */ -#define FLAT_FLAG_GZIP 0x0004 /* all but the header is compressed */ -#define FLAT_FLAG_GZDATA 0x0008 /* only data/relocs are compressed (for XIP) */ -#define FLAT_FLAG_KTRACE 0x0010 /* output useful kernel trace for debugging */ - - -#ifdef __KERNEL__ /* so systems without linux headers can compile the apps */ /* * While it would be nice to keep this header clean, users of older * tools still need this support in the kernel. So this section is @@ -95,6 +49,4 @@ typedef union { } reloc; } flat_v2_reloc_t; -#endif /* __KERNEL__ */ - #endif /* _LINUX_FLAT_H */ diff --git a/include/linux/fs.h b/include/linux/fs.h index 39f3e12ca75..001c7cff2d4 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1,121 +1,68 @@ #ifndef _LINUX_FS_H #define _LINUX_FS_H -/* - * This file has definitions for some important file table - * structures etc. - */ -#include <linux/limits.h> -#include <linux/ioctl.h> +#include <linux/linkage.h> +#include <linux/wait.h> +#include <linux/kdev_t.h> +#include <linux/dcache.h> +#include <linux/path.h> +#include <linux/stat.h> +#include <linux/cache.h> +#include <linux/list.h> +#include <linux/radix-tree.h> +#include <linux/rbtree.h> +#include <linux/init.h> +#include <linux/pid.h> +#include <linux/bug.h> +#include <linux/mutex.h> +#include <linux/capability.h> +#include <linux/semaphore.h> +#include <linux/fiemap.h> +#include <linux/rculist_bl.h> +#include <linux/atomic.h> +#include <linux/shrinker.h> +#include <linux/migrate_mode.h> +#include <linux/uidgid.h> +#include <linux/lockdep.h> +#include <linux/percpu-rwsem.h> #include <linux/blk_types.h> -#include <linux/types.h> - -/* - * It's silly to have NR_OPEN bigger than NR_FILE, but you can change - * the file limit at runtime and only root can increase the per-process - * nr_file rlimit, so it's safe to set up a ridiculously high absolute - * upper limit on files-per-process. - * - * Some programs (notably those using select()) may have to be - * recompiled to take full advantage of the new limits.. - */ - -/* Fixed constants first: */ -#undef NR_OPEN -#define INR_OPEN_CUR 1024 /* Initial setting for nfile rlimits */ -#define INR_OPEN_MAX 4096 /* Hard limit for nfile rlimits */ - -#define BLOCK_SIZE_BITS 10 -#define BLOCK_SIZE (1<<BLOCK_SIZE_BITS) - -#define SEEK_SET 0 /* seek relative to beginning of file */ -#define SEEK_CUR 1 /* seek relative to current file position */ -#define SEEK_END 2 /* seek relative to end of file */ -#define SEEK_DATA 3 /* seek to the next data */ -#define SEEK_HOLE 4 /* seek to the next hole */ -#define SEEK_MAX SEEK_HOLE - -struct fstrim_range { - __u64 start; - __u64 len; - __u64 minlen; -}; - -/* And dynamically-tunable limits and defaults: */ -struct files_stat_struct { - unsigned long nr_files; /* read only */ - unsigned long nr_free_files; /* read only */ - unsigned long max_files; /* tunable */ -}; - -struct inodes_stat_t { - int nr_inodes; - int nr_unused; - int dummy[5]; /* padding for sysctl ABI compatibility */ -}; - - -#define NR_FILE 8192 /* this can well be larger on a larger system */ - -#define MAY_EXEC 0x00000001 -#define MAY_WRITE 0x00000002 -#define MAY_READ 0x00000004 -#define MAY_APPEND 0x00000008 -#define MAY_ACCESS 0x00000010 -#define MAY_OPEN 0x00000020 -#define MAY_CHDIR 0x00000040 -/* called from RCU mode, don't block */ -#define MAY_NOT_BLOCK 0x00000080 - -/* - * flags in file.f_mode. Note that FMODE_READ and FMODE_WRITE must correspond - * to O_WRONLY and O_RDWR via the strange trick in __dentry_open() - */ - -/* file is open for reading */ -#define FMODE_READ ((__force fmode_t)0x1) -/* file is open for writing */ -#define FMODE_WRITE ((__force fmode_t)0x2) -/* file is seekable */ -#define FMODE_LSEEK ((__force fmode_t)0x4) -/* file can be accessed using pread */ -#define FMODE_PREAD ((__force fmode_t)0x8) -/* file can be accessed using pwrite */ -#define FMODE_PWRITE ((__force fmode_t)0x10) -/* File is opened for execution with sys_execve / sys_uselib */ -#define FMODE_EXEC ((__force fmode_t)0x20) -/* File is opened with O_NDELAY (only set for block devices) */ -#define FMODE_NDELAY ((__force fmode_t)0x40) -/* File is opened with O_EXCL (only set for block devices) */ -#define FMODE_EXCL ((__force fmode_t)0x80) -/* File is opened using open(.., 3, ..) and is writeable only for ioctls - (specialy hack for floppy.c) */ -#define FMODE_WRITE_IOCTL ((__force fmode_t)0x100) -/* 32bit hashes as llseek() offset (for directories) */ -#define FMODE_32BITHASH ((__force fmode_t)0x200) -/* 64bit hashes as llseek() offset (for directories) */ -#define FMODE_64BITHASH ((__force fmode_t)0x400) -/* - * Don't update ctime and mtime. - * - * Currently a special hack for the XFS open_by_handle ioctl, but we'll - * hopefully graduate it to a proper O_CMTIME flag supported by open(2) soon. - */ -#define FMODE_NOCMTIME ((__force fmode_t)0x800) +#include <asm/byteorder.h> +#include <uapi/linux/fs.h> -/* Expect random access pattern */ -#define FMODE_RANDOM ((__force fmode_t)0x1000) +struct export_operations; +struct hd_geometry; +struct iovec; +struct nameidata; +struct kiocb; +struct kobject; +struct pipe_inode_info; +struct poll_table_struct; +struct kstatfs; +struct vm_area_struct; +struct vfsmount; +struct cred; +struct swap_info_struct; -/* File is huge (eg. /dev/kmem): treat loff_t as unsigned */ -#define FMODE_UNSIGNED_OFFSET ((__force fmode_t)0x2000) +extern void __init inode_init(void); +extern void __init inode_init_early(void); +extern void __init files_init(unsigned long); -/* File is opened with O_PATH; almost nothing can be done with it */ -#define FMODE_PATH ((__force fmode_t)0x4000) +extern struct files_stat_struct files_stat; +extern unsigned long get_max_files(void); +extern int sysctl_nr_open; +extern struct inodes_stat_t inodes_stat; +extern int leases_enable, lease_break_time; +extern int sysctl_protected_symlinks; +extern int sysctl_protected_hardlinks; -/* File was opened by fanotify and shouldn't generate fanotify events */ -#define FMODE_NONOTIFY ((__force fmode_t)0x1000000) +struct buffer_head; +typedef int (get_block_t)(struct inode *inode, sector_t iblock, + struct buffer_head *bh_result, int create); +typedef void (dio_iodone_t)(struct kiocb *iocb, loff_t offset, + ssize_t bytes, void *private, int ret, + bool is_async); /* * The below are the various read and write types that we support. Some of @@ -175,284 +122,6 @@ struct inodes_stat_t { #define WRITE_FUA (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_FUA) #define WRITE_FLUSH_FUA (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_FLUSH | REQ_FUA) - -/* - * Flag for rw_copy_check_uvector and compat_rw_copy_check_uvector - * that indicates that they should check the contents of the iovec are - * valid, but not check the memory that the iovec elements - * points too. - */ -#define CHECK_IOVEC_ONLY -1 - -#define SEL_IN 1 -#define SEL_OUT 2 -#define SEL_EX 4 - -/* public flags for file_system_type */ -#define FS_REQUIRES_DEV 1 -#define FS_BINARY_MOUNTDATA 2 -#define FS_HAS_SUBTYPE 4 -#define FS_REVAL_DOT 16384 /* Check the paths ".", ".." for staleness */ -#define FS_RENAME_DOES_D_MOVE 32768 /* FS will handle d_move() - * during rename() internally. - */ - -/* - * These are the fs-independent mount-flags: up to 32 flags are supported - */ -#define MS_RDONLY 1 /* Mount read-only */ -#define MS_NOSUID 2 /* Ignore suid and sgid bits */ -#define MS_NODEV 4 /* Disallow access to device special files */ -#define MS_NOEXEC 8 /* Disallow program execution */ -#define MS_SYNCHRONOUS 16 /* Writes are synced at once */ -#define MS_REMOUNT 32 /* Alter flags of a mounted FS */ -#define MS_MANDLOCK 64 /* Allow mandatory locks on an FS */ -#define MS_DIRSYNC 128 /* Directory modifications are synchronous */ -#define MS_NOATIME 1024 /* Do not update access times. */ -#define MS_NODIRATIME 2048 /* Do not update directory access times */ -#define MS_BIND 4096 -#define MS_MOVE 8192 -#define MS_REC 16384 -#define MS_VERBOSE 32768 /* War is peace. Verbosity is silence. - MS_VERBOSE is deprecated. */ -#define MS_SILENT 32768 -#define MS_POSIXACL (1<<16) /* VFS does not apply the umask */ -#define MS_UNBINDABLE (1<<17) /* change to unbindable */ -#define MS_PRIVATE (1<<18) /* change to private */ -#define MS_SLAVE (1<<19) /* change to slave */ -#define MS_SHARED (1<<20) /* change to shared */ -#define MS_RELATIME (1<<21) /* Update atime relative to mtime/ctime. */ -#define MS_KERNMOUNT (1<<22) /* this is a kern_mount call */ -#define MS_I_VERSION (1<<23) /* Update inode I_version field */ -#define MS_STRICTATIME (1<<24) /* Always perform atime updates */ -#define MS_NOSEC (1<<28) -#define MS_BORN (1<<29) -#define MS_ACTIVE (1<<30) -#define MS_NOUSER (1<<31) - -/* - * Superblock flags that can be altered by MS_REMOUNT - */ -#define MS_RMT_MASK (MS_RDONLY|MS_SYNCHRONOUS|MS_MANDLOCK|MS_I_VERSION) - -/* - * Old magic mount flag and mask - */ -#define MS_MGC_VAL 0xC0ED0000 -#define MS_MGC_MSK 0xffff0000 - -/* Inode flags - they have nothing to superblock flags now */ - -#define S_SYNC 1 /* Writes are synced at once */ -#define S_NOATIME 2 /* Do not update access times */ -#define S_APPEND 4 /* Append-only file */ -#define S_IMMUTABLE 8 /* Immutable file */ -#define S_DEAD 16 /* removed, but still open directory */ -#define S_NOQUOTA 32 /* Inode is not counted to quota */ -#define S_DIRSYNC 64 /* Directory modifications are synchronous */ -#define S_NOCMTIME 128 /* Do not update file c/mtime */ -#define S_SWAPFILE 256 /* Do not truncate: swapon got its bmaps */ -#define S_PRIVATE 512 /* Inode is fs-internal */ -#define S_IMA 1024 /* Inode has an associated IMA struct */ -#define S_AUTOMOUNT 2048 /* Automount/referral quasi-directory */ -#define S_NOSEC 4096 /* no suid or xattr security attributes */ - -/* - * Note that nosuid etc flags are inode-specific: setting some file-system - * flags just means all the inodes inherit those flags by default. It might be - * possible to override it selectively if you really wanted to with some - * ioctl() that is not currently implemented. - * - * Exception: MS_RDONLY is always applied to the entire file system. - * - * Unfortunately, it is possible to change a filesystems flags with it mounted - * with files in use. This means that all of the inodes will not have their - * i_flags updated. Hence, i_flags no longer inherit the superblock mount - * flags, so these have to be checked separately. -- rmk@arm.uk.linux.org - */ -#define __IS_FLG(inode,flg) ((inode)->i_sb->s_flags & (flg)) - -#define IS_RDONLY(inode) ((inode)->i_sb->s_flags & MS_RDONLY) -#define IS_SYNC(inode) (__IS_FLG(inode, MS_SYNCHRONOUS) || \ - ((inode)->i_flags & S_SYNC)) -#define IS_DIRSYNC(inode) (__IS_FLG(inode, MS_SYNCHRONOUS|MS_DIRSYNC) || \ - ((inode)->i_flags & (S_SYNC|S_DIRSYNC))) -#define IS_MANDLOCK(inode) __IS_FLG(inode, MS_MANDLOCK) -#define IS_NOATIME(inode) __IS_FLG(inode, MS_RDONLY|MS_NOATIME) -#define IS_I_VERSION(inode) __IS_FLG(inode, MS_I_VERSION) - -#define IS_NOQUOTA(inode) ((inode)->i_flags & S_NOQUOTA) -#define IS_APPEND(inode) ((inode)->i_flags & S_APPEND) -#define IS_IMMUTABLE(inode) ((inode)->i_flags & S_IMMUTABLE) -#define IS_POSIXACL(inode) __IS_FLG(inode, MS_POSIXACL) - -#define IS_DEADDIR(inode) ((inode)->i_flags & S_DEAD) -#define IS_NOCMTIME(inode) ((inode)->i_flags & S_NOCMTIME) -#define IS_SWAPFILE(inode) ((inode)->i_flags & S_SWAPFILE) -#define IS_PRIVATE(inode) ((inode)->i_flags & S_PRIVATE) -#define IS_IMA(inode) ((inode)->i_flags & S_IMA) -#define IS_AUTOMOUNT(inode) ((inode)->i_flags & S_AUTOMOUNT) -#define IS_NOSEC(inode) ((inode)->i_flags & S_NOSEC) - -/* the read-only stuff doesn't really belong here, but any other place is - probably as bad and I don't want to create yet another include file. */ - -#define BLKROSET _IO(0x12,93) /* set device read-only (0 = read-write) */ -#define BLKROGET _IO(0x12,94) /* get read-only status (0 = read_write) */ -#define BLKRRPART _IO(0x12,95) /* re-read partition table */ -#define BLKGETSIZE _IO(0x12,96) /* return device size /512 (long *arg) */ -#define BLKFLSBUF _IO(0x12,97) /* flush buffer cache */ -#define BLKRASET _IO(0x12,98) /* set read ahead for block device */ -#define BLKRAGET _IO(0x12,99) /* get current read ahead setting */ -#define BLKFRASET _IO(0x12,100)/* set filesystem (mm/filemap.c) read-ahead */ -#define BLKFRAGET _IO(0x12,101)/* get filesystem (mm/filemap.c) read-ahead */ -#define BLKSECTSET _IO(0x12,102)/* set max sectors per request (ll_rw_blk.c) */ -#define BLKSECTGET _IO(0x12,103)/* get max sectors per request (ll_rw_blk.c) */ -#define BLKSSZGET _IO(0x12,104)/* get block device sector size */ -#if 0 -#define BLKPG _IO(0x12,105)/* See blkpg.h */ - -/* Some people are morons. Do not use sizeof! */ - -#define BLKELVGET _IOR(0x12,106,size_t)/* elevator get */ -#define BLKELVSET _IOW(0x12,107,size_t)/* elevator set */ -/* This was here just to show that the number is taken - - probably all these _IO(0x12,*) ioctls should be moved to blkpg.h. */ -#endif -/* A jump here: 108-111 have been used for various private purposes. */ -#define BLKBSZGET _IOR(0x12,112,size_t) -#define BLKBSZSET _IOW(0x12,113,size_t) -#define BLKGETSIZE64 _IOR(0x12,114,size_t) /* return device size in bytes (u64 *arg) */ -#define BLKTRACESETUP _IOWR(0x12,115,struct blk_user_trace_setup) -#define BLKTRACESTART _IO(0x12,116) -#define BLKTRACESTOP _IO(0x12,117) -#define BLKTRACETEARDOWN _IO(0x12,118) -#define BLKDISCARD _IO(0x12,119) -#define BLKIOMIN _IO(0x12,120) -#define BLKIOOPT _IO(0x12,121) -#define BLKALIGNOFF _IO(0x12,122) -#define BLKPBSZGET _IO(0x12,123) -#define BLKDISCARDZEROES _IO(0x12,124) -#define BLKSECDISCARD _IO(0x12,125) -#define BLKROTATIONAL _IO(0x12,126) -#define BLKZEROOUT _IO(0x12,127) - -#define BMAP_IOCTL 1 /* obsolete - kept for compatibility */ -#define FIBMAP _IO(0x00,1) /* bmap access */ -#define FIGETBSZ _IO(0x00,2) /* get the block size used for bmap */ -#define FIFREEZE _IOWR('X', 119, int) /* Freeze */ -#define FITHAW _IOWR('X', 120, int) /* Thaw */ -#define FITRIM _IOWR('X', 121, struct fstrim_range) /* Trim */ - -#define FS_IOC_GETFLAGS _IOR('f', 1, long) -#define FS_IOC_SETFLAGS _IOW('f', 2, long) -#define FS_IOC_GETVERSION _IOR('v', 1, long) -#define FS_IOC_SETVERSION _IOW('v', 2, long) -#define FS_IOC_FIEMAP _IOWR('f', 11, struct fiemap) -#define FS_IOC32_GETFLAGS _IOR('f', 1, int) -#define FS_IOC32_SETFLAGS _IOW('f', 2, int) -#define FS_IOC32_GETVERSION _IOR('v', 1, int) -#define FS_IOC32_SETVERSION _IOW('v', 2, int) - -/* - * Inode flags (FS_IOC_GETFLAGS / FS_IOC_SETFLAGS) - */ -#define FS_SECRM_FL 0x00000001 /* Secure deletion */ -#define FS_UNRM_FL 0x00000002 /* Undelete */ -#define FS_COMPR_FL 0x00000004 /* Compress file */ -#define FS_SYNC_FL 0x00000008 /* Synchronous updates */ -#define FS_IMMUTABLE_FL 0x00000010 /* Immutable file */ -#define FS_APPEND_FL 0x00000020 /* writes to file may only append */ -#define FS_NODUMP_FL 0x00000040 /* do not dump file */ -#define FS_NOATIME_FL 0x00000080 /* do not update atime */ -/* Reserved for compression usage... */ -#define FS_DIRTY_FL 0x00000100 -#define FS_COMPRBLK_FL 0x00000200 /* One or more compressed clusters */ -#define FS_NOCOMP_FL 0x00000400 /* Don't compress */ -#define FS_ECOMPR_FL 0x00000800 /* Compression error */ -/* End compression flags --- maybe not all used */ -#define FS_BTREE_FL 0x00001000 /* btree format dir */ -#define FS_INDEX_FL 0x00001000 /* hash-indexed directory */ -#define FS_IMAGIC_FL 0x00002000 /* AFS directory */ -#define FS_JOURNAL_DATA_FL 0x00004000 /* Reserved for ext3 */ -#define FS_NOTAIL_FL 0x00008000 /* file tail should not be merged */ -#define FS_DIRSYNC_FL 0x00010000 /* dirsync behaviour (directories only) */ -#define FS_TOPDIR_FL 0x00020000 /* Top of directory hierarchies*/ -#define FS_EXTENT_FL 0x00080000 /* Extents */ -#define FS_DIRECTIO_FL 0x00100000 /* Use direct i/o */ -#define FS_NOCOW_FL 0x00800000 /* Do not cow file */ -#define FS_RESERVED_FL 0x80000000 /* reserved for ext2 lib */ - -#define FS_FL_USER_VISIBLE 0x0003DFFF /* User visible flags */ -#define FS_FL_USER_MODIFIABLE 0x000380FF /* User modifiable flags */ - - -#define SYNC_FILE_RANGE_WAIT_BEFORE 1 -#define SYNC_FILE_RANGE_WRITE 2 -#define SYNC_FILE_RANGE_WAIT_AFTER 4 - -#ifdef __KERNEL__ - -#include <linux/linkage.h> -#include <linux/wait.h> -#include <linux/kdev_t.h> -#include <linux/dcache.h> -#include <linux/path.h> -#include <linux/stat.h> -#include <linux/cache.h> -#include <linux/list.h> -#include <linux/radix-tree.h> -#include <linux/rbtree.h> -#include <linux/init.h> -#include <linux/pid.h> -#include <linux/bug.h> -#include <linux/mutex.h> -#include <linux/capability.h> -#include <linux/semaphore.h> -#include <linux/fiemap.h> -#include <linux/rculist_bl.h> -#include <linux/atomic.h> -#include <linux/shrinker.h> -#include <linux/migrate_mode.h> -#include <linux/uidgid.h> -#include <linux/lockdep.h> -#include <linux/percpu-rwsem.h> - -#include <asm/byteorder.h> - -struct export_operations; -struct hd_geometry; -struct iovec; -struct nameidata; -struct kiocb; -struct kobject; -struct pipe_inode_info; -struct poll_table_struct; -struct kstatfs; -struct vm_area_struct; -struct vfsmount; -struct cred; -struct swap_info_struct; - -extern void __init inode_init(void); -extern void __init inode_init_early(void); -extern void __init files_init(unsigned long); - -extern struct files_stat_struct files_stat; -extern unsigned long get_max_files(void); -extern int sysctl_nr_open; -extern struct inodes_stat_t inodes_stat; -extern int leases_enable, lease_break_time; -extern int sysctl_protected_symlinks; -extern int sysctl_protected_hardlinks; - -struct buffer_head; -typedef int (get_block_t)(struct inode *inode, sector_t iblock, - struct buffer_head *bh_result, int create); -typedef void (dio_iodone_t)(struct kiocb *iocb, loff_t offset, - ssize_t bytes, void *private, int ret, - bool is_async); - /* * Attribute flags. These should be or-ed together to figure out what * has been changed! @@ -1136,7 +805,7 @@ static inline int file_check_writeable(struct file *filp) #if BITS_PER_LONG==32 #define MAX_LFS_FILESIZE (((loff_t)PAGE_CACHE_SIZE << (BITS_PER_LONG-1))-1) #elif BITS_PER_LONG==64 -#define MAX_LFS_FILESIZE ((loff_t)0x7fffffffffffffff) +#define MAX_LFS_FILESIZE ((loff_t)0x7fffffffffffffffLL) #endif #define FL_POSIX 1 @@ -1511,7 +1180,6 @@ struct super_block { unsigned long s_magic; struct dentry *s_root; struct rw_semaphore s_umount; - struct mutex s_lock; int s_count; atomic_t s_active; #ifdef CONFIG_SECURITY @@ -2080,7 +1748,7 @@ extern struct vfsmount *kern_mount_data(struct file_system_type *, void *data); extern void kern_unmount(struct vfsmount *mnt); extern int may_umount_tree(struct vfsmount *); extern int may_umount(struct vfsmount *); -extern long do_mount(char *, char *, char *, unsigned long, void *); +extern long do_mount(const char *, const char *, const char *, unsigned long, void *); extern struct vfsmount *collect_mounts(struct path *); extern void drop_collected_mounts(struct vfsmount *); extern int iterate_mounts(int (*)(struct vfsmount *, void *), void *, @@ -2197,6 +1865,13 @@ static inline int break_lease(struct inode *inode, unsigned int mode) #endif /* CONFIG_FILE_LOCKING */ /* fs/open.c */ +struct audit_names; +struct filename { + const char *name; /* pointer to actual string */ + const __user char *uptr; /* original userland pointer */ + struct audit_names *aname; + bool separate; /* should "name" be freed? */ +}; extern int do_truncate(struct dentry *, loff_t start, unsigned int time_attrs, struct file *filp); @@ -2204,12 +1879,15 @@ extern int do_fallocate(struct file *file, int mode, loff_t offset, loff_t len); extern long do_sys_open(int dfd, const char __user *filename, int flags, umode_t mode); +extern struct file *file_open_name(struct filename *, int, umode_t); extern struct file *filp_open(const char *, int, umode_t); extern struct file *file_open_root(struct dentry *, struct vfsmount *, const char *, int); extern struct file * dentry_open(const struct path *, int, const struct cred *); extern int filp_close(struct file *, fl_owner_t id); -extern char * getname(const char __user *); + +extern struct filename *getname(const char __user *); + enum { FILE_CREATED = 1, FILE_OPENED = 2 @@ -2229,13 +1907,14 @@ extern void __init vfs_caches_init(unsigned long); extern struct kmem_cache *names_cachep; -#define __getname_gfp(gfp) kmem_cache_alloc(names_cachep, (gfp)) -#define __getname() __getname_gfp(GFP_KERNEL) +extern void final_putname(struct filename *name); + +#define __getname() kmem_cache_alloc(names_cachep, GFP_KERNEL) #define __putname(name) kmem_cache_free(names_cachep, (void *)(name)) #ifndef CONFIG_AUDITSYSCALL -#define putname(name) __putname(name) +#define putname(name) final_putname(name) #else -extern void putname(const char *name); +extern void putname(struct filename *name); #endif #ifdef CONFIG_BLOCK @@ -2867,5 +2546,4 @@ static inline void inode_has_no_xattr(struct inode *inode) inode->i_flags |= S_NOSEC; } -#endif /* __KERNEL__ */ #endif /* _LINUX_FS_H */ diff --git a/include/linux/fsl_hypervisor.h b/include/linux/fsl_hypervisor.h index 1cebaeeeef5..2a707d7fb32 100644 --- a/include/linux/fsl_hypervisor.h +++ b/include/linux/fsl_hypervisor.h @@ -36,187 +36,11 @@ * also be included by applications that need to communicate with the driver * via the ioctl interface. */ - #ifndef FSL_HYPERVISOR_H #define FSL_HYPERVISOR_H -#include <linux/types.h> - -/** - * struct fsl_hv_ioctl_restart - restart a partition - * @ret: return error code from the hypervisor - * @partition: the ID of the partition to restart, or -1 for the - * calling partition - * - * Used by FSL_HV_IOCTL_PARTITION_RESTART - */ -struct fsl_hv_ioctl_restart { - __u32 ret; - __u32 partition; -}; +#include <uapi/linux/fsl_hypervisor.h> -/** - * struct fsl_hv_ioctl_status - get a partition's status - * @ret: return error code from the hypervisor - * @partition: the ID of the partition to query, or -1 for the - * calling partition - * @status: The returned status of the partition - * - * Used by FSL_HV_IOCTL_PARTITION_GET_STATUS - * - * Values of 'status': - * 0 = Stopped - * 1 = Running - * 2 = Starting - * 3 = Stopping - */ -struct fsl_hv_ioctl_status { - __u32 ret; - __u32 partition; - __u32 status; -}; - -/** - * struct fsl_hv_ioctl_start - start a partition - * @ret: return error code from the hypervisor - * @partition: the ID of the partition to control - * @entry_point: The offset within the guest IMA to start execution - * @load: If non-zero, reload the partition's images before starting - * - * Used by FSL_HV_IOCTL_PARTITION_START - */ -struct fsl_hv_ioctl_start { - __u32 ret; - __u32 partition; - __u32 entry_point; - __u32 load; -}; - -/** - * struct fsl_hv_ioctl_stop - stop a partition - * @ret: return error code from the hypervisor - * @partition: the ID of the partition to stop, or -1 for the calling - * partition - * - * Used by FSL_HV_IOCTL_PARTITION_STOP - */ -struct fsl_hv_ioctl_stop { - __u32 ret; - __u32 partition; -}; - -/** - * struct fsl_hv_ioctl_memcpy - copy memory between partitions - * @ret: return error code from the hypervisor - * @source: the partition ID of the source partition, or -1 for this - * partition - * @target: the partition ID of the target partition, or -1 for this - * partition - * @reserved: reserved, must be set to 0 - * @local_addr: user-space virtual address of a buffer in the local - * partition - * @remote_addr: guest physical address of a buffer in the - * remote partition - * @count: the number of bytes to copy. Both the local and remote - * buffers must be at least 'count' bytes long - * - * Used by FSL_HV_IOCTL_MEMCPY - * - * The 'local' partition is the partition that calls this ioctl. The - * 'remote' partition is a different partition. The data is copied from - * the 'source' paritition' to the 'target' partition. - * - * The buffer in the remote partition must be guest physically - * contiguous. - * - * This ioctl does not support copying memory between two remote - * partitions or within the same partition, so either 'source' or - * 'target' (but not both) must be -1. In other words, either - * - * source == local and target == remote - * or - * source == remote and target == local - */ -struct fsl_hv_ioctl_memcpy { - __u32 ret; - __u32 source; - __u32 target; - __u32 reserved; /* padding to ensure local_vaddr is aligned */ - __u64 local_vaddr; - __u64 remote_paddr; - __u64 count; -}; - -/** - * struct fsl_hv_ioctl_doorbell - ring a doorbell - * @ret: return error code from the hypervisor - * @doorbell: the handle of the doorbell to ring doorbell - * - * Used by FSL_HV_IOCTL_DOORBELL - */ -struct fsl_hv_ioctl_doorbell { - __u32 ret; - __u32 doorbell; -}; - -/** - * struct fsl_hv_ioctl_prop - get/set a device tree property - * @ret: return error code from the hypervisor - * @handle: handle of partition whose tree to access - * @path: virtual address of path name of node to access - * @propname: virtual address of name of property to access - * @propval: virtual address of property data buffer - * @proplen: Size of property data buffer - * @reserved: reserved, must be set to 0 - * - * Used by FSL_HV_IOCTL_DOORBELL - */ -struct fsl_hv_ioctl_prop { - __u32 ret; - __u32 handle; - __u64 path; - __u64 propname; - __u64 propval; - __u32 proplen; - __u32 reserved; /* padding to ensure structure is aligned */ -}; - -/* The ioctl type, documented in ioctl-number.txt */ -#define FSL_HV_IOCTL_TYPE 0xAF - -/* Restart another partition */ -#define FSL_HV_IOCTL_PARTITION_RESTART \ - _IOWR(FSL_HV_IOCTL_TYPE, 1, struct fsl_hv_ioctl_restart) - -/* Get a partition's status */ -#define FSL_HV_IOCTL_PARTITION_GET_STATUS \ - _IOWR(FSL_HV_IOCTL_TYPE, 2, struct fsl_hv_ioctl_status) - -/* Boot another partition */ -#define FSL_HV_IOCTL_PARTITION_START \ - _IOWR(FSL_HV_IOCTL_TYPE, 3, struct fsl_hv_ioctl_start) - -/* Stop this or another partition */ -#define FSL_HV_IOCTL_PARTITION_STOP \ - _IOWR(FSL_HV_IOCTL_TYPE, 4, struct fsl_hv_ioctl_stop) - -/* Copy data from one partition to another */ -#define FSL_HV_IOCTL_MEMCPY \ - _IOWR(FSL_HV_IOCTL_TYPE, 5, struct fsl_hv_ioctl_memcpy) - -/* Ring a doorbell */ -#define FSL_HV_IOCTL_DOORBELL \ - _IOWR(FSL_HV_IOCTL_TYPE, 6, struct fsl_hv_ioctl_doorbell) - -/* Get a property from another guest's device tree */ -#define FSL_HV_IOCTL_GETPROP \ - _IOWR(FSL_HV_IOCTL_TYPE, 7, struct fsl_hv_ioctl_prop) - -/* Set a property in another guest's device tree */ -#define FSL_HV_IOCTL_SETPROP \ - _IOWR(FSL_HV_IOCTL_TYPE, 8, struct fsl_hv_ioctl_prop) - -#ifdef __KERNEL__ /** * fsl_hv_event_register() - register a callback for failover events @@ -237,5 +61,3 @@ int fsl_hv_failover_register(struct notifier_block *nb); int fsl_hv_failover_unregister(struct notifier_block *nb); #endif - -#endif diff --git a/include/linux/fsnotify.h b/include/linux/fsnotify.h index a6dfe694456..0fbfb4646d1 100644 --- a/include/linux/fsnotify.h +++ b/include/linux/fsnotify.h @@ -109,7 +109,7 @@ static inline void fsnotify_move(struct inode *old_dir, struct inode *new_dir, if (source) fsnotify(source, FS_MOVE_SELF, moved->d_inode, FSNOTIFY_EVENT_INODE, NULL, 0); - audit_inode_child(moved, new_dir); + audit_inode_child(new_dir, moved, AUDIT_TYPE_CHILD_CREATE); } /* @@ -155,7 +155,7 @@ static inline void fsnotify_inoderemove(struct inode *inode) */ static inline void fsnotify_create(struct inode *inode, struct dentry *dentry) { - audit_inode_child(dentry, inode); + audit_inode_child(inode, dentry, AUDIT_TYPE_CHILD_CREATE); fsnotify(inode, FS_CREATE, dentry->d_inode, FSNOTIFY_EVENT_INODE, dentry->d_name.name, 0); } @@ -168,7 +168,7 @@ static inline void fsnotify_create(struct inode *inode, struct dentry *dentry) static inline void fsnotify_link(struct inode *dir, struct inode *inode, struct dentry *new_dentry) { fsnotify_link_count(inode); - audit_inode_child(new_dentry, dir); + audit_inode_child(dir, new_dentry, AUDIT_TYPE_CHILD_CREATE); fsnotify(dir, FS_CREATE, inode, FSNOTIFY_EVENT_INODE, new_dentry->d_name.name, 0); } @@ -181,7 +181,7 @@ static inline void fsnotify_mkdir(struct inode *inode, struct dentry *dentry) __u32 mask = (FS_CREATE | FS_ISDIR); struct inode *d_inode = dentry->d_inode; - audit_inode_child(dentry, inode); + audit_inode_child(inode, dentry, AUDIT_TYPE_CHILD_CREATE); fsnotify(inode, mask, d_inode, FSNOTIFY_EVENT_INODE, dentry->d_name.name, 0); } diff --git a/include/linux/futex.h b/include/linux/futex.h index 1e5a26d7923..b0d95cac826 100644 --- a/include/linux/futex.h +++ b/include/linux/futex.h @@ -1,129 +1,8 @@ #ifndef _LINUX_FUTEX_H #define _LINUX_FUTEX_H -#include <linux/compiler.h> -#include <linux/types.h> +#include <uapi/linux/futex.h> -/* Second argument to futex syscall */ - - -#define FUTEX_WAIT 0 -#define FUTEX_WAKE 1 -#define FUTEX_FD 2 -#define FUTEX_REQUEUE 3 -#define FUTEX_CMP_REQUEUE 4 -#define FUTEX_WAKE_OP 5 -#define FUTEX_LOCK_PI 6 -#define FUTEX_UNLOCK_PI 7 -#define FUTEX_TRYLOCK_PI 8 -#define FUTEX_WAIT_BITSET 9 -#define FUTEX_WAKE_BITSET 10 -#define FUTEX_WAIT_REQUEUE_PI 11 -#define FUTEX_CMP_REQUEUE_PI 12 - -#define FUTEX_PRIVATE_FLAG 128 -#define FUTEX_CLOCK_REALTIME 256 -#define FUTEX_CMD_MASK ~(FUTEX_PRIVATE_FLAG | FUTEX_CLOCK_REALTIME) - -#define FUTEX_WAIT_PRIVATE (FUTEX_WAIT | FUTEX_PRIVATE_FLAG) -#define FUTEX_WAKE_PRIVATE (FUTEX_WAKE | FUTEX_PRIVATE_FLAG) -#define FUTEX_REQUEUE_PRIVATE (FUTEX_REQUEUE | FUTEX_PRIVATE_FLAG) -#define FUTEX_CMP_REQUEUE_PRIVATE (FUTEX_CMP_REQUEUE | FUTEX_PRIVATE_FLAG) -#define FUTEX_WAKE_OP_PRIVATE (FUTEX_WAKE_OP | FUTEX_PRIVATE_FLAG) -#define FUTEX_LOCK_PI_PRIVATE (FUTEX_LOCK_PI | FUTEX_PRIVATE_FLAG) -#define FUTEX_UNLOCK_PI_PRIVATE (FUTEX_UNLOCK_PI | FUTEX_PRIVATE_FLAG) -#define FUTEX_TRYLOCK_PI_PRIVATE (FUTEX_TRYLOCK_PI | FUTEX_PRIVATE_FLAG) -#define FUTEX_WAIT_BITSET_PRIVATE (FUTEX_WAIT_BITSET | FUTEX_PRIVATE_FLAG) -#define FUTEX_WAKE_BITSET_PRIVATE (FUTEX_WAKE_BITSET | FUTEX_PRIVATE_FLAG) -#define FUTEX_WAIT_REQUEUE_PI_PRIVATE (FUTEX_WAIT_REQUEUE_PI | \ - FUTEX_PRIVATE_FLAG) -#define FUTEX_CMP_REQUEUE_PI_PRIVATE (FUTEX_CMP_REQUEUE_PI | \ - FUTEX_PRIVATE_FLAG) - -/* - * Support for robust futexes: the kernel cleans up held futexes at - * thread exit time. - */ - -/* - * Per-lock list entry - embedded in user-space locks, somewhere close - * to the futex field. (Note: user-space uses a double-linked list to - * achieve O(1) list add and remove, but the kernel only needs to know - * about the forward link) - * - * NOTE: this structure is part of the syscall ABI, and must not be - * changed. - */ -struct robust_list { - struct robust_list __user *next; -}; - -/* - * Per-thread list head: - * - * NOTE: this structure is part of the syscall ABI, and must only be - * changed if the change is first communicated with the glibc folks. - * (When an incompatible change is done, we'll increase the structure - * size, which glibc will detect) - */ -struct robust_list_head { - /* - * The head of the list. Points back to itself if empty: - */ - struct robust_list list; - - /* - * This relative offset is set by user-space, it gives the kernel - * the relative position of the futex field to examine. This way - * we keep userspace flexible, to freely shape its data-structure, - * without hardcoding any particular offset into the kernel: - */ - long futex_offset; - - /* - * The death of the thread may race with userspace setting - * up a lock's links. So to handle this race, userspace first - * sets this field to the address of the to-be-taken lock, - * then does the lock acquire, and then adds itself to the - * list, and then clears this field. Hence the kernel will - * always have full knowledge of all locks that the thread - * _might_ have taken. We check the owner TID in any case, - * so only truly owned locks will be handled. - */ - struct robust_list __user *list_op_pending; -}; - -/* - * Are there any waiters for this robust futex: - */ -#define FUTEX_WAITERS 0x80000000 - -/* - * The kernel signals via this bit that a thread holding a futex - * has exited without unlocking the futex. The kernel also does - * a FUTEX_WAKE on such futexes, after setting the bit, to wake - * up any possible waiters: - */ -#define FUTEX_OWNER_DIED 0x40000000 - -/* - * The rest of the robust-futex field is for the TID: - */ -#define FUTEX_TID_MASK 0x3fffffff - -/* - * This limit protects against a deliberately circular list. - * (Not worth introducing an rlimit for it) - */ -#define ROBUST_LIST_LIMIT 2048 - -/* - * bitset with all bits set for the FUTEX_xxx_BITSET OPs to request a - * match of any bit. - */ -#define FUTEX_BITSET_MATCH_ANY 0xffffffff - -#ifdef __KERNEL__ struct inode; struct mm_struct; struct task_struct; @@ -185,31 +64,4 @@ static inline void exit_pi_state_list(struct task_struct *curr) { } #endif -#endif /* __KERNEL__ */ - -#define FUTEX_OP_SET 0 /* *(int *)UADDR2 = OPARG; */ -#define FUTEX_OP_ADD 1 /* *(int *)UADDR2 += OPARG; */ -#define FUTEX_OP_OR 2 /* *(int *)UADDR2 |= OPARG; */ -#define FUTEX_OP_ANDN 3 /* *(int *)UADDR2 &= ~OPARG; */ -#define FUTEX_OP_XOR 4 /* *(int *)UADDR2 ^= OPARG; */ - -#define FUTEX_OP_OPARG_SHIFT 8 /* Use (1 << OPARG) instead of OPARG. */ - -#define FUTEX_OP_CMP_EQ 0 /* if (oldval == CMPARG) wake */ -#define FUTEX_OP_CMP_NE 1 /* if (oldval != CMPARG) wake */ -#define FUTEX_OP_CMP_LT 2 /* if (oldval < CMPARG) wake */ -#define FUTEX_OP_CMP_LE 3 /* if (oldval <= CMPARG) wake */ -#define FUTEX_OP_CMP_GT 4 /* if (oldval > CMPARG) wake */ -#define FUTEX_OP_CMP_GE 5 /* if (oldval >= CMPARG) wake */ - -/* FUTEX_WAKE_OP will perform atomically - int oldval = *(int *)UADDR2; - *(int *)UADDR2 = oldval OP OPARG; - if (oldval CMP CMPARG) - wake UADDR2; */ - -#define FUTEX_OP(op, oparg, cmp, cmparg) \ - (((op & 0xf) << 28) | ((cmp & 0xf) << 24) \ - | ((oparg & 0xfff) << 12) | (cmparg & 0xfff)) - #endif diff --git a/include/linux/gameport.h b/include/linux/gameport.h index b986be51340..bb7de09e8d5 100644 --- a/include/linux/gameport.h +++ b/include/linux/gameport.h @@ -1,6 +1,3 @@ -#ifndef _GAMEPORT_H -#define _GAMEPORT_H - /* * Copyright (c) 1999-2002 Vojtech Pavlik * @@ -8,8 +5,9 @@ * under the terms of the GNU General Public License version 2 as published by * the Free Software Foundation. */ +#ifndef _GAMEPORT_H +#define _GAMEPORT_H -#ifdef __KERNEL__ #include <asm/io.h> #include <linux/types.h> #include <linux/list.h> @@ -17,6 +15,7 @@ #include <linux/device.h> #include <linux/timer.h> #include <linux/slab.h> +#include <uapi/linux/gameport.h> struct gameport { @@ -166,24 +165,6 @@ void gameport_unregister_driver(struct gameport_driver *drv); module_driver(__gameport_driver, gameport_register_driver, \ gameport_unregister_driver) -#endif /* __KERNEL__ */ - -#define GAMEPORT_MODE_DISABLED 0 -#define GAMEPORT_MODE_RAW 1 -#define GAMEPORT_MODE_COOKED 2 - -#define GAMEPORT_ID_VENDOR_ANALOG 0x0001 -#define GAMEPORT_ID_VENDOR_MADCATZ 0x0002 -#define GAMEPORT_ID_VENDOR_LOGITECH 0x0003 -#define GAMEPORT_ID_VENDOR_CREATIVE 0x0004 -#define GAMEPORT_ID_VENDOR_GENIUS 0x0005 -#define GAMEPORT_ID_VENDOR_INTERACT 0x0006 -#define GAMEPORT_ID_VENDOR_MICROSOFT 0x0007 -#define GAMEPORT_ID_VENDOR_THRUSTMASTER 0x0008 -#define GAMEPORT_ID_VENDOR_GRAVIS 0x0009 -#define GAMEPORT_ID_VENDOR_GUILLEMOT 0x000a - -#ifdef __KERNEL__ static inline void gameport_trigger(struct gameport *gameport) { @@ -235,5 +216,4 @@ static inline void gameport_set_poll_interval(struct gameport *gameport, unsigne void gameport_start_polling(struct gameport *gameport); void gameport_stop_polling(struct gameport *gameport); -#endif /* __KERNEL__ */ #endif diff --git a/include/linux/genetlink.h b/include/linux/genetlink.h index 5ab61c1eb6b..55b685719d5 100644 --- a/include/linux/genetlink.h +++ b/include/linux/genetlink.h @@ -1,86 +1,8 @@ #ifndef __LINUX_GENERIC_NETLINK_H #define __LINUX_GENERIC_NETLINK_H -#include <linux/types.h> -#include <linux/netlink.h> +#include <uapi/linux/genetlink.h> -#define GENL_NAMSIZ 16 /* length of family name */ - -#define GENL_MIN_ID NLMSG_MIN_TYPE -#define GENL_MAX_ID 1023 - -struct genlmsghdr { - __u8 cmd; - __u8 version; - __u16 reserved; -}; - -#define GENL_HDRLEN NLMSG_ALIGN(sizeof(struct genlmsghdr)) - -#define GENL_ADMIN_PERM 0x01 -#define GENL_CMD_CAP_DO 0x02 -#define GENL_CMD_CAP_DUMP 0x04 -#define GENL_CMD_CAP_HASPOL 0x08 - -/* - * List of reserved static generic netlink identifiers: - */ -#define GENL_ID_GENERATE 0 -#define GENL_ID_CTRL NLMSG_MIN_TYPE - -/************************************************************************** - * Controller - **************************************************************************/ - -enum { - CTRL_CMD_UNSPEC, - CTRL_CMD_NEWFAMILY, - CTRL_CMD_DELFAMILY, - CTRL_CMD_GETFAMILY, - CTRL_CMD_NEWOPS, - CTRL_CMD_DELOPS, - CTRL_CMD_GETOPS, - CTRL_CMD_NEWMCAST_GRP, - CTRL_CMD_DELMCAST_GRP, - CTRL_CMD_GETMCAST_GRP, /* unused */ - __CTRL_CMD_MAX, -}; - -#define CTRL_CMD_MAX (__CTRL_CMD_MAX - 1) - -enum { - CTRL_ATTR_UNSPEC, - CTRL_ATTR_FAMILY_ID, - CTRL_ATTR_FAMILY_NAME, - CTRL_ATTR_VERSION, - CTRL_ATTR_HDRSIZE, - CTRL_ATTR_MAXATTR, - CTRL_ATTR_OPS, - CTRL_ATTR_MCAST_GROUPS, - __CTRL_ATTR_MAX, -}; - -#define CTRL_ATTR_MAX (__CTRL_ATTR_MAX - 1) - -enum { - CTRL_ATTR_OP_UNSPEC, - CTRL_ATTR_OP_ID, - CTRL_ATTR_OP_FLAGS, - __CTRL_ATTR_OP_MAX, -}; - -#define CTRL_ATTR_OP_MAX (__CTRL_ATTR_OP_MAX - 1) - -enum { - CTRL_ATTR_MCAST_GRP_UNSPEC, - CTRL_ATTR_MCAST_GRP_NAME, - CTRL_ATTR_MCAST_GRP_ID, - __CTRL_ATTR_MCAST_GRP_MAX, -}; - -#define CTRL_ATTR_MCAST_GRP_MAX (__CTRL_ATTR_MCAST_GRP_MAX - 1) - -#ifdef __KERNEL__ /* All generic netlink requests are serialized by a global lock. */ extern void genl_lock(void); @@ -113,6 +35,4 @@ extern int lockdep_genl_is_held(void); #define MODULE_ALIAS_GENL_FAMILY(family)\ MODULE_ALIAS_NET_PF_PROTO_NAME(PF_NETLINK, NETLINK_GENERIC, "-family-" family) -#endif /* __KERNEL__ */ - #endif /* __LINUX_GENERIC_NETLINK_H */ diff --git a/include/linux/hdlc.h b/include/linux/hdlc.h index ee275c8b3df..1acb1445e05 100644 --- a/include/linux/hdlc.h +++ b/include/linux/hdlc.h @@ -7,24 +7,14 @@ * under the terms of version 2 of the GNU General Public License * as published by the Free Software Foundation. */ - #ifndef __HDLC_H #define __HDLC_H -#define HDLC_MAX_MTU 1500 /* Ethernet 1500 bytes */ -#if 0 -#define HDLC_MAX_MRU (HDLC_MAX_MTU + 10 + 14 + 4) /* for ETH+VLAN over FR */ -#else -#define HDLC_MAX_MRU 1600 /* as required for FR network */ -#endif - - -#ifdef __KERNEL__ - #include <linux/skbuff.h> #include <linux/netdevice.h> #include <linux/hdlc/ioctl.h> +#include <uapi/linux/hdlc.h> /* This structure is a private property of HDLC protocols. Hardware drivers have no interest here */ @@ -127,5 +117,4 @@ static __inline__ __be16 hdlc_type_trans(struct sk_buff *skb, return htons(ETH_P_HDLC); } -#endif /* __KERNEL */ #endif /* __HDLC_H */ diff --git a/include/linux/hdlcdrv.h b/include/linux/hdlcdrv.h index c010b4a785b..be3be25bb89 100644 --- a/include/linux/hdlcdrv.h +++ b/include/linux/hdlcdrv.h @@ -3,110 +3,14 @@ * The Linux soundcard driver for 1200 baud and 9600 baud packet radio * (C) 1996-1998 by Thomas Sailer, HB9JNX/AE4WA */ - #ifndef _HDLCDRV_H #define _HDLCDRV_H -/* -------------------------------------------------------------------- */ -/* - * structs for the IOCTL commands - */ - -struct hdlcdrv_params { - int iobase; - int irq; - int dma; - int dma2; - int seriobase; - int pariobase; - int midiiobase; -}; - -struct hdlcdrv_channel_params { - int tx_delay; /* the transmitter keyup delay in 10ms units */ - int tx_tail; /* the transmitter keyoff delay in 10ms units */ - int slottime; /* the slottime in 10ms; usually 10 = 100ms */ - int ppersist; /* the p-persistence 0..255 */ - int fulldup; /* some driver do not support full duplex, setting */ - /* this just makes them send even if DCD is on */ -}; - -struct hdlcdrv_old_channel_state { - int ptt; - int dcd; - int ptt_keyed; -}; - -struct hdlcdrv_channel_state { - int ptt; - int dcd; - int ptt_keyed; - unsigned long tx_packets; - unsigned long tx_errors; - unsigned long rx_packets; - unsigned long rx_errors; -}; - -struct hdlcdrv_ioctl { - int cmd; - union { - struct hdlcdrv_params mp; - struct hdlcdrv_channel_params cp; - struct hdlcdrv_channel_state cs; - struct hdlcdrv_old_channel_state ocs; - unsigned int calibrate; - unsigned char bits; - char modename[128]; - char drivername[32]; - } data; -}; - -/* -------------------------------------------------------------------- */ - -/* - * ioctl values - */ -#define HDLCDRVCTL_GETMODEMPAR 0 -#define HDLCDRVCTL_SETMODEMPAR 1 -#define HDLCDRVCTL_MODEMPARMASK 2 /* not handled by hdlcdrv */ -#define HDLCDRVCTL_GETCHANNELPAR 10 -#define HDLCDRVCTL_SETCHANNELPAR 11 -#define HDLCDRVCTL_OLDGETSTAT 20 -#define HDLCDRVCTL_CALIBRATE 21 -#define HDLCDRVCTL_GETSTAT 22 - -/* - * these are mainly for debugging purposes - */ -#define HDLCDRVCTL_GETSAMPLES 30 -#define HDLCDRVCTL_GETBITS 31 - -/* - * not handled by hdlcdrv, but by its depending drivers - */ -#define HDLCDRVCTL_GETMODE 40 -#define HDLCDRVCTL_SETMODE 41 -#define HDLCDRVCTL_MODELIST 42 -#define HDLCDRVCTL_DRIVERNAME 43 - -/* - * mask of needed modem parameters, returned by HDLCDRVCTL_MODEMPARMASK - */ -#define HDLCDRV_PARMASK_IOBASE (1<<0) -#define HDLCDRV_PARMASK_IRQ (1<<1) -#define HDLCDRV_PARMASK_DMA (1<<2) -#define HDLCDRV_PARMASK_DMA2 (1<<3) -#define HDLCDRV_PARMASK_SERIOBASE (1<<4) -#define HDLCDRV_PARMASK_PARIOBASE (1<<5) -#define HDLCDRV_PARMASK_MIDIIOBASE (1<<6) - -/* -------------------------------------------------------------------- */ - -#ifdef __KERNEL__ #include <linux/netdevice.h> #include <linux/if.h> #include <linux/spinlock.h> +#include <uapi/linux/hdlcdrv.h> #define HDLCDRV_MAGIC 0x5ac6e778 #define HDLCDRV_HDLCBUFFER 32 /* should be a power of 2 for speed reasons */ @@ -368,10 +272,4 @@ void hdlcdrv_unregister(struct net_device *dev); -#endif /* __KERNEL__ */ - -/* -------------------------------------------------------------------- */ - #endif /* _HDLCDRV_H */ - -/* -------------------------------------------------------------------- */ diff --git a/include/linux/hid.h b/include/linux/hid.h index 7e1f37db758..c076041a069 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -1,12 +1,8 @@ -#ifndef __HID_H -#define __HID_H - /* * Copyright (c) 1999 Andreas Gal * Copyright (c) 2000-2001 Vojtech Pavlik * Copyright (c) 2006-2007 Jiri Kosina */ - /* * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -26,43 +22,9 @@ * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail: * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic */ +#ifndef __HID_H +#define __HID_H -/* - * USB HID (Human Interface Device) interface class code - */ - -#define USB_INTERFACE_CLASS_HID 3 - -/* - * USB HID interface subclass and protocol codes - */ - -#define USB_INTERFACE_SUBCLASS_BOOT 1 -#define USB_INTERFACE_PROTOCOL_KEYBOARD 1 -#define USB_INTERFACE_PROTOCOL_MOUSE 2 - -/* - * HID class requests - */ - -#define HID_REQ_GET_REPORT 0x01 -#define HID_REQ_GET_IDLE 0x02 -#define HID_REQ_GET_PROTOCOL 0x03 -#define HID_REQ_SET_REPORT 0x09 -#define HID_REQ_SET_IDLE 0x0A -#define HID_REQ_SET_PROTOCOL 0x0B - -/* - * HID class descriptor types - */ - -#define HID_DT_HID (USB_TYPE_CLASS | 0x01) -#define HID_DT_REPORT (USB_TYPE_CLASS | 0x02) -#define HID_DT_PHYSICAL (USB_TYPE_CLASS | 0x03) - -#define HID_MAX_DESCRIPTOR_SIZE 4096 - -#ifdef __KERNEL__ #include <linux/types.h> #include <linux/slab.h> @@ -73,6 +35,7 @@ #include <linux/input.h> #include <linux/semaphore.h> #include <linux/power_supply.h> +#include <uapi/linux/hid.h> /* * We parse each description item into this structure. Short items data @@ -943,7 +906,4 @@ do { \ #define hid_dbg(hid, fmt, arg...) \ dev_dbg(&(hid)->dev, fmt, ##arg) -#endif /* __KERNEL__ */ - #endif - diff --git a/include/linux/hiddev.h b/include/linux/hiddev.h index a3f481a3063..a5dd8148660 100644 --- a/include/linux/hiddev.h +++ b/include/linux/hiddev.h @@ -1,12 +1,8 @@ -#ifndef _HIDDEV_H -#define _HIDDEV_H - /* * Copyright (c) 1999-2000 Vojtech Pavlik * * Sponsored by SuSE */ - /* * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -26,190 +22,11 @@ * e-mail - mail your message to <vojtech@suse.cz>, or by paper mail: * Vojtech Pavlik, Ucitelska 1576, Prague 8, 182 00 Czech Republic */ +#ifndef _HIDDEV_H +#define _HIDDEV_H -#include <linux/types.h> - -/* - * The event structure itself - */ - -struct hiddev_event { - unsigned hid; - signed int value; -}; - -struct hiddev_devinfo { - __u32 bustype; - __u32 busnum; - __u32 devnum; - __u32 ifnum; - __s16 vendor; - __s16 product; - __s16 version; - __u32 num_applications; -}; - -struct hiddev_collection_info { - __u32 index; - __u32 type; - __u32 usage; - __u32 level; -}; - -#define HID_STRING_SIZE 256 -struct hiddev_string_descriptor { - __s32 index; - char value[HID_STRING_SIZE]; -}; - -struct hiddev_report_info { - __u32 report_type; - __u32 report_id; - __u32 num_fields; -}; - -/* To do a GUSAGE/SUSAGE, fill in at least usage_code, report_type and - * report_id. Set report_id to REPORT_ID_UNKNOWN if the rest of the fields - * are unknown. Otherwise use a usage_ref struct filled in from a previous - * successful GUSAGE call to save time. To actually send a value to the - * device, perform a SUSAGE first, followed by a SREPORT. An INITREPORT or a - * GREPORT isn't necessary for a GUSAGE to return valid data. - */ -#define HID_REPORT_ID_UNKNOWN 0xffffffff -#define HID_REPORT_ID_FIRST 0x00000100 -#define HID_REPORT_ID_NEXT 0x00000200 -#define HID_REPORT_ID_MASK 0x000000ff -#define HID_REPORT_ID_MAX 0x000000ff - -#define HID_REPORT_TYPE_INPUT 1 -#define HID_REPORT_TYPE_OUTPUT 2 -#define HID_REPORT_TYPE_FEATURE 3 -#define HID_REPORT_TYPE_MIN 1 -#define HID_REPORT_TYPE_MAX 3 - -struct hiddev_field_info { - __u32 report_type; - __u32 report_id; - __u32 field_index; - __u32 maxusage; - __u32 flags; - __u32 physical; /* physical usage for this field */ - __u32 logical; /* logical usage for this field */ - __u32 application; /* application usage for this field */ - __s32 logical_minimum; - __s32 logical_maximum; - __s32 physical_minimum; - __s32 physical_maximum; - __u32 unit_exponent; - __u32 unit; -}; - -/* Fill in report_type, report_id and field_index to get the information on a - * field. - */ -#define HID_FIELD_CONSTANT 0x001 -#define HID_FIELD_VARIABLE 0x002 -#define HID_FIELD_RELATIVE 0x004 -#define HID_FIELD_WRAP 0x008 -#define HID_FIELD_NONLINEAR 0x010 -#define HID_FIELD_NO_PREFERRED 0x020 -#define HID_FIELD_NULL_STATE 0x040 -#define HID_FIELD_VOLATILE 0x080 -#define HID_FIELD_BUFFERED_BYTE 0x100 - -struct hiddev_usage_ref { - __u32 report_type; - __u32 report_id; - __u32 field_index; - __u32 usage_index; - __u32 usage_code; - __s32 value; -}; - -/* hiddev_usage_ref_multi is used for sending multiple bytes to a control. - * It really manifests itself as setting the value of consecutive usages */ -#define HID_MAX_MULTI_USAGES 1024 -struct hiddev_usage_ref_multi { - struct hiddev_usage_ref uref; - __u32 num_values; - __s32 values[HID_MAX_MULTI_USAGES]; -}; - -/* FIELD_INDEX_NONE is returned in read() data from the kernel when flags - * is set to (HIDDEV_FLAG_UREF | HIDDEV_FLAG_REPORT) and a new report has - * been sent by the device - */ -#define HID_FIELD_INDEX_NONE 0xffffffff - -/* - * Protocol version. - */ - -#define HID_VERSION 0x010004 - -/* - * IOCTLs (0x00 - 0x7f) - */ - -#define HIDIOCGVERSION _IOR('H', 0x01, int) -#define HIDIOCAPPLICATION _IO('H', 0x02) -#define HIDIOCGDEVINFO _IOR('H', 0x03, struct hiddev_devinfo) -#define HIDIOCGSTRING _IOR('H', 0x04, struct hiddev_string_descriptor) -#define HIDIOCINITREPORT _IO('H', 0x05) -#define HIDIOCGNAME(len) _IOC(_IOC_READ, 'H', 0x06, len) -#define HIDIOCGREPORT _IOW('H', 0x07, struct hiddev_report_info) -#define HIDIOCSREPORT _IOW('H', 0x08, struct hiddev_report_info) -#define HIDIOCGREPORTINFO _IOWR('H', 0x09, struct hiddev_report_info) -#define HIDIOCGFIELDINFO _IOWR('H', 0x0A, struct hiddev_field_info) -#define HIDIOCGUSAGE _IOWR('H', 0x0B, struct hiddev_usage_ref) -#define HIDIOCSUSAGE _IOW('H', 0x0C, struct hiddev_usage_ref) -#define HIDIOCGUCODE _IOWR('H', 0x0D, struct hiddev_usage_ref) -#define HIDIOCGFLAG _IOR('H', 0x0E, int) -#define HIDIOCSFLAG _IOW('H', 0x0F, int) -#define HIDIOCGCOLLECTIONINDEX _IOW('H', 0x10, struct hiddev_usage_ref) -#define HIDIOCGCOLLECTIONINFO _IOWR('H', 0x11, struct hiddev_collection_info) -#define HIDIOCGPHYS(len) _IOC(_IOC_READ, 'H', 0x12, len) - -/* For writing/reading to multiple/consecutive usages */ -#define HIDIOCGUSAGES _IOWR('H', 0x13, struct hiddev_usage_ref_multi) -#define HIDIOCSUSAGES _IOW('H', 0x14, struct hiddev_usage_ref_multi) - -/* - * Flags to be used in HIDIOCSFLAG - */ -#define HIDDEV_FLAG_UREF 0x1 -#define HIDDEV_FLAG_REPORT 0x2 -#define HIDDEV_FLAGS 0x3 - -/* To traverse the input report descriptor info for a HID device, perform the - * following: - * - * rinfo.report_type = HID_REPORT_TYPE_INPUT; - * rinfo.report_id = HID_REPORT_ID_FIRST; - * ret = ioctl(fd, HIDIOCGREPORTINFO, &rinfo); - * - * while (ret >= 0) { - * for (i = 0; i < rinfo.num_fields; i++) { - * finfo.report_type = rinfo.report_type; - * finfo.report_id = rinfo.report_id; - * finfo.field_index = i; - * ioctl(fd, HIDIOCGFIELDINFO, &finfo); - * for (j = 0; j < finfo.maxusage; j++) { - * uref.report_type = rinfo.report_type; - * uref.report_id = rinfo.report_id; - * uref.field_index = i; - * uref.usage_index = j; - * ioctl(fd, HIDIOCGUCODE, &uref); - * ioctl(fd, HIDIOCGUSAGE, &uref); - * } - * } - * rinfo.report_id |= HID_REPORT_ID_NEXT; - * ret = ioctl(fd, HIDIOCGREPORTINFO, &rinfo); - * } - */ - +#include <uapi/linux/hiddev.h> -#ifdef __KERNEL__ /* * In-kernel definitions. @@ -237,4 +54,3 @@ static inline void hiddev_report_event(struct hid_device *hid, struct hid_report #endif #endif -#endif diff --git a/include/linux/hidraw.h b/include/linux/hidraw.h index 45e9fcb8d87..2451662c728 100644 --- a/include/linux/hidraw.h +++ b/include/linux/hidraw.h @@ -1,10 +1,6 @@ -#ifndef _HIDRAW_H -#define _HIDRAW_H - /* * Copyright (c) 2007 Jiri Kosina */ - /* * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -14,39 +10,11 @@ * this program; if not, write to the Free Software Foundation, Inc., * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. */ +#ifndef _HIDRAW_H +#define _HIDRAW_H -#include <linux/hid.h> -#include <linux/types.h> - -struct hidraw_report_descriptor { - __u32 size; - __u8 value[HID_MAX_DESCRIPTOR_SIZE]; -}; - -struct hidraw_devinfo { - __u32 bustype; - __s16 vendor; - __s16 product; -}; - -/* ioctl interface */ -#define HIDIOCGRDESCSIZE _IOR('H', 0x01, int) -#define HIDIOCGRDESC _IOR('H', 0x02, struct hidraw_report_descriptor) -#define HIDIOCGRAWINFO _IOR('H', 0x03, struct hidraw_devinfo) -#define HIDIOCGRAWNAME(len) _IOC(_IOC_READ, 'H', 0x04, len) -#define HIDIOCGRAWPHYS(len) _IOC(_IOC_READ, 'H', 0x05, len) -/* The first byte of SFEATURE and GFEATURE is the report number */ -#define HIDIOCSFEATURE(len) _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x06, len) -#define HIDIOCGFEATURE(len) _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x07, len) - -#define HIDRAW_FIRST_MINOR 0 -#define HIDRAW_MAX_DEVICES 64 -/* number of reports to buffer */ -#define HIDRAW_BUFFER_SIZE 64 - +#include <uapi/linux/hidraw.h> -/* kernel-only API declarations */ -#ifdef __KERNEL__ struct hidraw { unsigned int minor; @@ -88,5 +56,3 @@ static inline void hidraw_disconnect(struct hid_device *hid) { } #endif #endif - -#endif diff --git a/include/linux/hpet.h b/include/linux/hpet.h index 219ca4f6bea..9427ab4e01c 100644 --- a/include/linux/hpet.h +++ b/include/linux/hpet.h @@ -1,9 +1,8 @@ #ifndef __HPET__ #define __HPET__ 1 -#include <linux/compiler.h> +#include <uapi/linux/hpet.h> -#ifdef __KERNEL__ /* * Offsets into HPET Registers @@ -108,24 +107,4 @@ static inline void hpet_reserve_timer(struct hpet_data *hd, int timer) int hpet_alloc(struct hpet_data *); -#endif /* __KERNEL__ */ - -struct hpet_info { - unsigned long hi_ireqfreq; /* Hz */ - unsigned long hi_flags; /* information */ - unsigned short hi_hpet; - unsigned short hi_timer; -}; - -#define HPET_INFO_PERIODIC 0x0010 /* periodic-capable comparator */ - -#define HPET_IE_ON _IO('h', 0x01) /* interrupt on */ -#define HPET_IE_OFF _IO('h', 0x02) /* interrupt off */ -#define HPET_INFO _IOR('h', 0x03, struct hpet_info) -#define HPET_EPI _IO('h', 0x04) /* enable periodic */ -#define HPET_DPI _IO('h', 0x05) /* disable periodic */ -#define HPET_IRQFREQ _IOW('h', 0x6, unsigned long) /* IRQFREQ usec */ - -#define MAX_HPET_TBS 8 /* maximum hpet timer blocks */ - #endif /* !__HPET__ */ diff --git a/include/linux/i2c-dev.h b/include/linux/i2c-dev.h index 8a7406b2114..79727144c5c 100644 --- a/include/linux/i2c-dev.h +++ b/include/linux/i2c-dev.h @@ -19,57 +19,10 @@ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. */ - #ifndef _LINUX_I2C_DEV_H #define _LINUX_I2C_DEV_H -#include <linux/types.h> -#include <linux/compiler.h> - -/* /dev/i2c-X ioctl commands. The ioctl's parameter is always an - * unsigned long, except for: - * - I2C_FUNCS, takes pointer to an unsigned long - * - I2C_RDWR, takes pointer to struct i2c_rdwr_ioctl_data - * - I2C_SMBUS, takes pointer to struct i2c_smbus_ioctl_data - */ -#define I2C_RETRIES 0x0701 /* number of times a device address should - be polled when not acknowledging */ -#define I2C_TIMEOUT 0x0702 /* set timeout in units of 10 ms */ - -/* NOTE: Slave address is 7 or 10 bits, but 10-bit addresses - * are NOT supported! (due to code brokenness) - */ -#define I2C_SLAVE 0x0703 /* Use this slave address */ -#define I2C_SLAVE_FORCE 0x0706 /* Use this slave address, even if it - is already in use by a driver! */ -#define I2C_TENBIT 0x0704 /* 0 for 7 bit addrs, != 0 for 10 bit */ - -#define I2C_FUNCS 0x0705 /* Get the adapter functionality mask */ - -#define I2C_RDWR 0x0707 /* Combined R/W transfer (one STOP only) */ - -#define I2C_PEC 0x0708 /* != 0 to use PEC with SMBus */ -#define I2C_SMBUS 0x0720 /* SMBus transfer */ +#include <uapi/linux/i2c-dev.h> - -/* This is the structure as used in the I2C_SMBUS ioctl call */ -struct i2c_smbus_ioctl_data { - __u8 read_write; - __u8 command; - __u32 size; - union i2c_smbus_data __user *data; -}; - -/* This is the structure as used in the I2C_RDWR ioctl call */ -struct i2c_rdwr_ioctl_data { - struct i2c_msg __user *msgs; /* pointers to i2c_msgs */ - __u32 nmsgs; /* number of i2c_msgs */ -}; - -#define I2C_RDRW_IOCTL_MAX_MSGS 42 - -#ifdef __KERNEL__ #define I2C_MAJOR 89 /* Device major number */ -#endif - #endif /* _LINUX_I2C_DEV_H */ diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 94aed0c85bb..800de224336 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -23,18 +23,16 @@ /* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and Frodo Looijaard <frodol@dds.nl> */ - #ifndef _LINUX_I2C_H #define _LINUX_I2C_H -#include <linux/types.h> -#ifdef __KERNEL__ #include <linux/mod_devicetable.h> #include <linux/device.h> /* for struct device */ #include <linux/sched.h> /* for completion */ #include <linux/mutex.h> #include <linux/of.h> /* for struct device_node */ #include <linux/swab.h> /* for swab16 */ +#include <uapi/linux/i2c.h> extern struct bus_type i2c_bus_type; extern struct device_type i2c_adapter_type; @@ -503,125 +501,4 @@ static inline int i2c_adapter_id(struct i2c_adapter *adap) i2c_del_driver) #endif /* I2C */ -#endif /* __KERNEL__ */ - -/** - * struct i2c_msg - an I2C transaction segment beginning with START - * @addr: Slave address, either seven or ten bits. When this is a ten - * bit address, I2C_M_TEN must be set in @flags and the adapter - * must support I2C_FUNC_10BIT_ADDR. - * @flags: I2C_M_RD is handled by all adapters. No other flags may be - * provided unless the adapter exported the relevant I2C_FUNC_* - * flags through i2c_check_functionality(). - * @len: Number of data bytes in @buf being read from or written to the - * I2C slave address. For read transactions where I2C_M_RECV_LEN - * is set, the caller guarantees that this buffer can hold up to - * 32 bytes in addition to the initial length byte sent by the - * slave (plus, if used, the SMBus PEC); and this value will be - * incremented by the number of block data bytes received. - * @buf: The buffer into which data is read, or from which it's written. - * - * An i2c_msg is the low level representation of one segment of an I2C - * transaction. It is visible to drivers in the @i2c_transfer() procedure, - * to userspace from i2c-dev, and to I2C adapter drivers through the - * @i2c_adapter.@master_xfer() method. - * - * Except when I2C "protocol mangling" is used, all I2C adapters implement - * the standard rules for I2C transactions. Each transaction begins with a - * START. That is followed by the slave address, and a bit encoding read - * versus write. Then follow all the data bytes, possibly including a byte - * with SMBus PEC. The transfer terminates with a NAK, or when all those - * bytes have been transferred and ACKed. If this is the last message in a - * group, it is followed by a STOP. Otherwise it is followed by the next - * @i2c_msg transaction segment, beginning with a (repeated) START. - * - * Alternatively, when the adapter supports I2C_FUNC_PROTOCOL_MANGLING then - * passing certain @flags may have changed those standard protocol behaviors. - * Those flags are only for use with broken/nonconforming slaves, and with - * adapters which are known to support the specific mangling options they - * need (one or more of IGNORE_NAK, NO_RD_ACK, NOSTART, and REV_DIR_ADDR). - */ -struct i2c_msg { - __u16 addr; /* slave address */ - __u16 flags; -#define I2C_M_TEN 0x0010 /* this is a ten bit chip address */ -#define I2C_M_RD 0x0001 /* read data, from slave to master */ -#define I2C_M_STOP 0x8000 /* if I2C_FUNC_PROTOCOL_MANGLING */ -#define I2C_M_NOSTART 0x4000 /* if I2C_FUNC_NOSTART */ -#define I2C_M_REV_DIR_ADDR 0x2000 /* if I2C_FUNC_PROTOCOL_MANGLING */ -#define I2C_M_IGNORE_NAK 0x1000 /* if I2C_FUNC_PROTOCOL_MANGLING */ -#define I2C_M_NO_RD_ACK 0x0800 /* if I2C_FUNC_PROTOCOL_MANGLING */ -#define I2C_M_RECV_LEN 0x0400 /* length will be first received byte */ - __u16 len; /* msg length */ - __u8 *buf; /* pointer to msg data */ -}; - -/* To determine what functionality is present */ - -#define I2C_FUNC_I2C 0x00000001 -#define I2C_FUNC_10BIT_ADDR 0x00000002 -#define I2C_FUNC_PROTOCOL_MANGLING 0x00000004 /* I2C_M_IGNORE_NAK etc. */ -#define I2C_FUNC_SMBUS_PEC 0x00000008 -#define I2C_FUNC_NOSTART 0x00000010 /* I2C_M_NOSTART */ -#define I2C_FUNC_SMBUS_BLOCK_PROC_CALL 0x00008000 /* SMBus 2.0 */ -#define I2C_FUNC_SMBUS_QUICK 0x00010000 -#define I2C_FUNC_SMBUS_READ_BYTE 0x00020000 -#define I2C_FUNC_SMBUS_WRITE_BYTE 0x00040000 -#define I2C_FUNC_SMBUS_READ_BYTE_DATA 0x00080000 -#define I2C_FUNC_SMBUS_WRITE_BYTE_DATA 0x00100000 -#define I2C_FUNC_SMBUS_READ_WORD_DATA 0x00200000 -#define I2C_FUNC_SMBUS_WRITE_WORD_DATA 0x00400000 -#define I2C_FUNC_SMBUS_PROC_CALL 0x00800000 -#define I2C_FUNC_SMBUS_READ_BLOCK_DATA 0x01000000 -#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000 -#define I2C_FUNC_SMBUS_READ_I2C_BLOCK 0x04000000 /* I2C-like block xfer */ -#define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK 0x08000000 /* w/ 1-byte reg. addr. */ - -#define I2C_FUNC_SMBUS_BYTE (I2C_FUNC_SMBUS_READ_BYTE | \ - I2C_FUNC_SMBUS_WRITE_BYTE) -#define I2C_FUNC_SMBUS_BYTE_DATA (I2C_FUNC_SMBUS_READ_BYTE_DATA | \ - I2C_FUNC_SMBUS_WRITE_BYTE_DATA) -#define I2C_FUNC_SMBUS_WORD_DATA (I2C_FUNC_SMBUS_READ_WORD_DATA | \ - I2C_FUNC_SMBUS_WRITE_WORD_DATA) -#define I2C_FUNC_SMBUS_BLOCK_DATA (I2C_FUNC_SMBUS_READ_BLOCK_DATA | \ - I2C_FUNC_SMBUS_WRITE_BLOCK_DATA) -#define I2C_FUNC_SMBUS_I2C_BLOCK (I2C_FUNC_SMBUS_READ_I2C_BLOCK | \ - I2C_FUNC_SMBUS_WRITE_I2C_BLOCK) - -#define I2C_FUNC_SMBUS_EMUL (I2C_FUNC_SMBUS_QUICK | \ - I2C_FUNC_SMBUS_BYTE | \ - I2C_FUNC_SMBUS_BYTE_DATA | \ - I2C_FUNC_SMBUS_WORD_DATA | \ - I2C_FUNC_SMBUS_PROC_CALL | \ - I2C_FUNC_SMBUS_WRITE_BLOCK_DATA | \ - I2C_FUNC_SMBUS_I2C_BLOCK | \ - I2C_FUNC_SMBUS_PEC) - -/* - * Data for SMBus Messages - */ -#define I2C_SMBUS_BLOCK_MAX 32 /* As specified in SMBus standard */ -union i2c_smbus_data { - __u8 byte; - __u16 word; - __u8 block[I2C_SMBUS_BLOCK_MAX + 2]; /* block[0] is used for length */ - /* and one more for user-space compatibility */ -}; - -/* i2c_smbus_xfer read or write markers */ -#define I2C_SMBUS_READ 1 -#define I2C_SMBUS_WRITE 0 - -/* SMBus transaction types (size parameter in the above functions) - Note: these no longer correspond to the (arbitrary) PIIX4 internal codes! */ -#define I2C_SMBUS_QUICK 0 -#define I2C_SMBUS_BYTE 1 -#define I2C_SMBUS_BYTE_DATA 2 -#define I2C_SMBUS_WORD_DATA 3 -#define I2C_SMBUS_PROC_CALL 4 -#define I2C_SMBUS_BLOCK_DATA 5 -#define I2C_SMBUS_I2C_BLOCK_BROKEN 6 -#define I2C_SMBUS_BLOCK_PROC_CALL 7 /* SMBus 2.0 */ -#define I2C_SMBUS_I2C_BLOCK_DATA 8 - #endif /* _LINUX_I2C_H */ diff --git a/include/linux/icmp.h b/include/linux/icmp.h index 474f2a51cf0..efc18490627 100644 --- a/include/linux/icmp.h +++ b/include/linux/icmp.h @@ -17,89 +17,11 @@ #ifndef _LINUX_ICMP_H #define _LINUX_ICMP_H -#include <linux/types.h> - -#define ICMP_ECHOREPLY 0 /* Echo Reply */ -#define ICMP_DEST_UNREACH 3 /* Destination Unreachable */ -#define ICMP_SOURCE_QUENCH 4 /* Source Quench */ -#define ICMP_REDIRECT 5 /* Redirect (change route) */ -#define ICMP_ECHO 8 /* Echo Request */ -#define ICMP_TIME_EXCEEDED 11 /* Time Exceeded */ -#define ICMP_PARAMETERPROB 12 /* Parameter Problem */ -#define ICMP_TIMESTAMP 13 /* Timestamp Request */ -#define ICMP_TIMESTAMPREPLY 14 /* Timestamp Reply */ -#define ICMP_INFO_REQUEST 15 /* Information Request */ -#define ICMP_INFO_REPLY 16 /* Information Reply */ -#define ICMP_ADDRESS 17 /* Address Mask Request */ -#define ICMP_ADDRESSREPLY 18 /* Address Mask Reply */ -#define NR_ICMP_TYPES 18 - - -/* Codes for UNREACH. */ -#define ICMP_NET_UNREACH 0 /* Network Unreachable */ -#define ICMP_HOST_UNREACH 1 /* Host Unreachable */ -#define ICMP_PROT_UNREACH 2 /* Protocol Unreachable */ -#define ICMP_PORT_UNREACH 3 /* Port Unreachable */ -#define ICMP_FRAG_NEEDED 4 /* Fragmentation Needed/DF set */ -#define ICMP_SR_FAILED 5 /* Source Route failed */ -#define ICMP_NET_UNKNOWN 6 -#define ICMP_HOST_UNKNOWN 7 -#define ICMP_HOST_ISOLATED 8 -#define ICMP_NET_ANO 9 -#define ICMP_HOST_ANO 10 -#define ICMP_NET_UNR_TOS 11 -#define ICMP_HOST_UNR_TOS 12 -#define ICMP_PKT_FILTERED 13 /* Packet filtered */ -#define ICMP_PREC_VIOLATION 14 /* Precedence violation */ -#define ICMP_PREC_CUTOFF 15 /* Precedence cut off */ -#define NR_ICMP_UNREACH 15 /* instead of hardcoding immediate value */ - -/* Codes for REDIRECT. */ -#define ICMP_REDIR_NET 0 /* Redirect Net */ -#define ICMP_REDIR_HOST 1 /* Redirect Host */ -#define ICMP_REDIR_NETTOS 2 /* Redirect Net for TOS */ -#define ICMP_REDIR_HOSTTOS 3 /* Redirect Host for TOS */ - -/* Codes for TIME_EXCEEDED. */ -#define ICMP_EXC_TTL 0 /* TTL count exceeded */ -#define ICMP_EXC_FRAGTIME 1 /* Fragment Reass time exceeded */ - - -struct icmphdr { - __u8 type; - __u8 code; - __sum16 checksum; - union { - struct { - __be16 id; - __be16 sequence; - } echo; - __be32 gateway; - struct { - __be16 __unused; - __be16 mtu; - } frag; - } un; -}; - -#ifdef __KERNEL__ #include <linux/skbuff.h> +#include <uapi/linux/icmp.h> static inline struct icmphdr *icmp_hdr(const struct sk_buff *skb) { return (struct icmphdr *)skb_transport_header(skb); } -#endif - -/* - * constants for (set|get)sockopt - */ - -#define ICMP_FILTER 1 - -struct icmp_filter { - __u32 data; -}; - - #endif /* _LINUX_ICMP_H */ diff --git a/include/linux/icmpv6.h b/include/linux/icmpv6.h index ba45e6bc076..b4f6c29cace 100644 --- a/include/linux/icmpv6.h +++ b/include/linux/icmpv6.h @@ -1,174 +1,13 @@ #ifndef _LINUX_ICMPV6_H #define _LINUX_ICMPV6_H -#include <linux/types.h> -#include <asm/byteorder.h> - -struct icmp6hdr { - - __u8 icmp6_type; - __u8 icmp6_code; - __sum16 icmp6_cksum; - - - union { - __be32 un_data32[1]; - __be16 un_data16[2]; - __u8 un_data8[4]; - - struct icmpv6_echo { - __be16 identifier; - __be16 sequence; - } u_echo; - - struct icmpv6_nd_advt { -#if defined(__LITTLE_ENDIAN_BITFIELD) - __u32 reserved:5, - override:1, - solicited:1, - router:1, - reserved2:24; -#elif defined(__BIG_ENDIAN_BITFIELD) - __u32 router:1, - solicited:1, - override:1, - reserved:29; -#else -#error "Please fix <asm/byteorder.h>" -#endif - } u_nd_advt; - - struct icmpv6_nd_ra { - __u8 hop_limit; -#if defined(__LITTLE_ENDIAN_BITFIELD) - __u8 reserved:3, - router_pref:2, - home_agent:1, - other:1, - managed:1; - -#elif defined(__BIG_ENDIAN_BITFIELD) - __u8 managed:1, - other:1, - home_agent:1, - router_pref:2, - reserved:3; -#else -#error "Please fix <asm/byteorder.h>" -#endif - __be16 rt_lifetime; - } u_nd_ra; - - } icmp6_dataun; - -#define icmp6_identifier icmp6_dataun.u_echo.identifier -#define icmp6_sequence icmp6_dataun.u_echo.sequence -#define icmp6_pointer icmp6_dataun.un_data32[0] -#define icmp6_mtu icmp6_dataun.un_data32[0] -#define icmp6_unused icmp6_dataun.un_data32[0] -#define icmp6_maxdelay icmp6_dataun.un_data16[0] -#define icmp6_router icmp6_dataun.u_nd_advt.router -#define icmp6_solicited icmp6_dataun.u_nd_advt.solicited -#define icmp6_override icmp6_dataun.u_nd_advt.override -#define icmp6_ndiscreserved icmp6_dataun.u_nd_advt.reserved -#define icmp6_hop_limit icmp6_dataun.u_nd_ra.hop_limit -#define icmp6_addrconf_managed icmp6_dataun.u_nd_ra.managed -#define icmp6_addrconf_other icmp6_dataun.u_nd_ra.other -#define icmp6_rt_lifetime icmp6_dataun.u_nd_ra.rt_lifetime -#define icmp6_router_pref icmp6_dataun.u_nd_ra.router_pref -}; - -#ifdef __KERNEL__ #include <linux/skbuff.h> +#include <uapi/linux/icmpv6.h> static inline struct icmp6hdr *icmp6_hdr(const struct sk_buff *skb) { return (struct icmp6hdr *)skb_transport_header(skb); } -#endif - -#define ICMPV6_ROUTER_PREF_LOW 0x3 -#define ICMPV6_ROUTER_PREF_MEDIUM 0x0 -#define ICMPV6_ROUTER_PREF_HIGH 0x1 -#define ICMPV6_ROUTER_PREF_INVALID 0x2 - -#define ICMPV6_DEST_UNREACH 1 -#define ICMPV6_PKT_TOOBIG 2 -#define ICMPV6_TIME_EXCEED 3 -#define ICMPV6_PARAMPROB 4 - -#define ICMPV6_INFOMSG_MASK 0x80 - -#define ICMPV6_ECHO_REQUEST 128 -#define ICMPV6_ECHO_REPLY 129 -#define ICMPV6_MGM_QUERY 130 -#define ICMPV6_MGM_REPORT 131 -#define ICMPV6_MGM_REDUCTION 132 - -#define ICMPV6_NI_QUERY 139 -#define ICMPV6_NI_REPLY 140 - -#define ICMPV6_MLD2_REPORT 143 - -#define ICMPV6_DHAAD_REQUEST 144 -#define ICMPV6_DHAAD_REPLY 145 -#define ICMPV6_MOBILE_PREFIX_SOL 146 -#define ICMPV6_MOBILE_PREFIX_ADV 147 - -/* - * Codes for Destination Unreachable - */ -#define ICMPV6_NOROUTE 0 -#define ICMPV6_ADM_PROHIBITED 1 -#define ICMPV6_NOT_NEIGHBOUR 2 -#define ICMPV6_ADDR_UNREACH 3 -#define ICMPV6_PORT_UNREACH 4 - -/* - * Codes for Time Exceeded - */ -#define ICMPV6_EXC_HOPLIMIT 0 -#define ICMPV6_EXC_FRAGTIME 1 - -/* - * Codes for Parameter Problem - */ -#define ICMPV6_HDR_FIELD 0 -#define ICMPV6_UNK_NEXTHDR 1 -#define ICMPV6_UNK_OPTION 2 - -/* - * constants for (set|get)sockopt - */ - -#define ICMPV6_FILTER 1 - -/* - * ICMPV6 filter - */ - -#define ICMPV6_FILTER_BLOCK 1 -#define ICMPV6_FILTER_PASS 2 -#define ICMPV6_FILTER_BLOCKOTHERS 3 -#define ICMPV6_FILTER_PASSONLY 4 - -struct icmp6_filter { - __u32 data[8]; -}; - -/* - * Definitions for MLDv2 - */ -#define MLD2_MODE_IS_INCLUDE 1 -#define MLD2_MODE_IS_EXCLUDE 2 -#define MLD2_CHANGE_TO_INCLUDE 3 -#define MLD2_CHANGE_TO_EXCLUDE 4 -#define MLD2_ALLOW_NEW_SOURCES 5 -#define MLD2_BLOCK_OLD_SOURCES 6 - -#define MLD2_ALL_MCR_INIT { { { 0xff,0x02,0,0,0,0,0,0,0,0,0,0,0,0,0,0x16 } } } - -#ifdef __KERNEL__ #include <linux/netdevice.h> @@ -192,5 +31,3 @@ extern void icmpv6_flow_init(struct sock *sk, const struct in6_addr *daddr, int oif); #endif - -#endif diff --git a/include/linux/if_arp.h b/include/linux/if_arp.h index 9adcc29f084..89b4614a472 100644 --- a/include/linux/if_arp.h +++ b/include/linux/if_arp.h @@ -23,140 +23,8 @@ #ifndef _LINUX_IF_ARP_H #define _LINUX_IF_ARP_H -#include <linux/netdevice.h> - -/* ARP protocol HARDWARE identifiers. */ -#define ARPHRD_NETROM 0 /* from KA9Q: NET/ROM pseudo */ -#define ARPHRD_ETHER 1 /* Ethernet 10Mbps */ -#define ARPHRD_EETHER 2 /* Experimental Ethernet */ -#define ARPHRD_AX25 3 /* AX.25 Level 2 */ -#define ARPHRD_PRONET 4 /* PROnet token ring */ -#define ARPHRD_CHAOS 5 /* Chaosnet */ -#define ARPHRD_IEEE802 6 /* IEEE 802.2 Ethernet/TR/TB */ -#define ARPHRD_ARCNET 7 /* ARCnet */ -#define ARPHRD_APPLETLK 8 /* APPLEtalk */ -#define ARPHRD_DLCI 15 /* Frame Relay DLCI */ -#define ARPHRD_ATM 19 /* ATM */ -#define ARPHRD_METRICOM 23 /* Metricom STRIP (new IANA id) */ -#define ARPHRD_IEEE1394 24 /* IEEE 1394 IPv4 - RFC 2734 */ -#define ARPHRD_EUI64 27 /* EUI-64 */ -#define ARPHRD_INFINIBAND 32 /* InfiniBand */ - -/* Dummy types for non ARP hardware */ -#define ARPHRD_SLIP 256 -#define ARPHRD_CSLIP 257 -#define ARPHRD_SLIP6 258 -#define ARPHRD_CSLIP6 259 -#define ARPHRD_RSRVD 260 /* Notional KISS type */ -#define ARPHRD_ADAPT 264 -#define ARPHRD_ROSE 270 -#define ARPHRD_X25 271 /* CCITT X.25 */ -#define ARPHRD_HWX25 272 /* Boards with X.25 in firmware */ -#define ARPHRD_CAN 280 /* Controller Area Network */ -#define ARPHRD_PPP 512 -#define ARPHRD_CISCO 513 /* Cisco HDLC */ -#define ARPHRD_HDLC ARPHRD_CISCO -#define ARPHRD_LAPB 516 /* LAPB */ -#define ARPHRD_DDCMP 517 /* Digital's DDCMP protocol */ -#define ARPHRD_RAWHDLC 518 /* Raw HDLC */ - -#define ARPHRD_TUNNEL 768 /* IPIP tunnel */ -#define ARPHRD_TUNNEL6 769 /* IP6IP6 tunnel */ -#define ARPHRD_FRAD 770 /* Frame Relay Access Device */ -#define ARPHRD_SKIP 771 /* SKIP vif */ -#define ARPHRD_LOOPBACK 772 /* Loopback device */ -#define ARPHRD_LOCALTLK 773 /* Localtalk device */ -#define ARPHRD_FDDI 774 /* Fiber Distributed Data Interface */ -#define ARPHRD_BIF 775 /* AP1000 BIF */ -#define ARPHRD_SIT 776 /* sit0 device - IPv6-in-IPv4 */ -#define ARPHRD_IPDDP 777 /* IP over DDP tunneller */ -#define ARPHRD_IPGRE 778 /* GRE over IP */ -#define ARPHRD_PIMREG 779 /* PIMSM register interface */ -#define ARPHRD_HIPPI 780 /* High Performance Parallel Interface */ -#define ARPHRD_ASH 781 /* Nexus 64Mbps Ash */ -#define ARPHRD_ECONET 782 /* Acorn Econet */ -#define ARPHRD_IRDA 783 /* Linux-IrDA */ -/* ARP works differently on different FC media .. so */ -#define ARPHRD_FCPP 784 /* Point to point fibrechannel */ -#define ARPHRD_FCAL 785 /* Fibrechannel arbitrated loop */ -#define ARPHRD_FCPL 786 /* Fibrechannel public loop */ -#define ARPHRD_FCFABRIC 787 /* Fibrechannel fabric */ - /* 787->799 reserved for fibrechannel media types */ -#define ARPHRD_IEEE802_TR 800 /* Magic type ident for TR */ -#define ARPHRD_IEEE80211 801 /* IEEE 802.11 */ -#define ARPHRD_IEEE80211_PRISM 802 /* IEEE 802.11 + Prism2 header */ -#define ARPHRD_IEEE80211_RADIOTAP 803 /* IEEE 802.11 + radiotap header */ -#define ARPHRD_IEEE802154 804 -#define ARPHRD_IEEE802154_MONITOR 805 /* IEEE 802.15.4 network monitor */ - -#define ARPHRD_PHONET 820 /* PhoNet media type */ -#define ARPHRD_PHONET_PIPE 821 /* PhoNet pipe header */ -#define ARPHRD_CAIF 822 /* CAIF media type */ -#define ARPHRD_IP6GRE 823 /* GRE over IPv6 */ - -#define ARPHRD_VOID 0xFFFF /* Void type, nothing is known */ -#define ARPHRD_NONE 0xFFFE /* zero header length */ - -/* ARP protocol opcodes. */ -#define ARPOP_REQUEST 1 /* ARP request */ -#define ARPOP_REPLY 2 /* ARP reply */ -#define ARPOP_RREQUEST 3 /* RARP request */ -#define ARPOP_RREPLY 4 /* RARP reply */ -#define ARPOP_InREQUEST 8 /* InARP request */ -#define ARPOP_InREPLY 9 /* InARP reply */ -#define ARPOP_NAK 10 /* (ATM)ARP NAK */ - - -/* ARP ioctl request. */ -struct arpreq { - struct sockaddr arp_pa; /* protocol address */ - struct sockaddr arp_ha; /* hardware address */ - int arp_flags; /* flags */ - struct sockaddr arp_netmask; /* netmask (only for proxy arps) */ - char arp_dev[16]; -}; - -struct arpreq_old { - struct sockaddr arp_pa; /* protocol address */ - struct sockaddr arp_ha; /* hardware address */ - int arp_flags; /* flags */ - struct sockaddr arp_netmask; /* netmask (only for proxy arps) */ -}; - -/* ARP Flag values. */ -#define ATF_COM 0x02 /* completed entry (ha valid) */ -#define ATF_PERM 0x04 /* permanent entry */ -#define ATF_PUBL 0x08 /* publish entry */ -#define ATF_USETRAILERS 0x10 /* has requested trailers */ -#define ATF_NETMASK 0x20 /* want to use a netmask (only - for proxy entries) */ -#define ATF_DONTPUB 0x40 /* don't answer this addresses */ - -/* - * This structure defines an ethernet arp header. - */ - -struct arphdr { - __be16 ar_hrd; /* format of hardware address */ - __be16 ar_pro; /* format of protocol address */ - unsigned char ar_hln; /* length of hardware address */ - unsigned char ar_pln; /* length of protocol address */ - __be16 ar_op; /* ARP opcode (command) */ - -#if 0 - /* - * Ethernet looks like this : This bit is variable sized however... - */ - unsigned char ar_sha[ETH_ALEN]; /* sender hardware address */ - unsigned char ar_sip[4]; /* sender IP address */ - unsigned char ar_tha[ETH_ALEN]; /* target hardware address */ - unsigned char ar_tip[4]; /* target IP address */ -#endif - -}; - -#ifdef __KERNEL__ #include <linux/skbuff.h> +#include <uapi/linux/if_arp.h> static inline struct arphdr *arp_hdr(const struct sk_buff *skb) { @@ -168,6 +36,4 @@ static inline int arp_hdr_len(struct net_device *dev) /* ARP header, plus 2 device addresses, plus 2 IP addresses. */ return sizeof(struct arphdr) + (dev->addr_len + sizeof(u32)) * 2; } -#endif - #endif /* _LINUX_IF_ARP_H */ diff --git a/include/linux/if_bridge.h b/include/linux/if_bridge.h index dd3f2013964..1085ffeef95 100644 --- a/include/linux/if_bridge.h +++ b/include/linux/if_bridge.h @@ -9,97 +9,12 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ - #ifndef _LINUX_IF_BRIDGE_H #define _LINUX_IF_BRIDGE_H -#include <linux/types.h> - -#define SYSFS_BRIDGE_ATTR "bridge" -#define SYSFS_BRIDGE_FDB "brforward" -#define SYSFS_BRIDGE_PORT_SUBDIR "brif" -#define SYSFS_BRIDGE_PORT_ATTR "brport" -#define SYSFS_BRIDGE_PORT_LINK "bridge" - -#define BRCTL_VERSION 1 - -#define BRCTL_GET_VERSION 0 -#define BRCTL_GET_BRIDGES 1 -#define BRCTL_ADD_BRIDGE 2 -#define BRCTL_DEL_BRIDGE 3 -#define BRCTL_ADD_IF 4 -#define BRCTL_DEL_IF 5 -#define BRCTL_GET_BRIDGE_INFO 6 -#define BRCTL_GET_PORT_LIST 7 -#define BRCTL_SET_BRIDGE_FORWARD_DELAY 8 -#define BRCTL_SET_BRIDGE_HELLO_TIME 9 -#define BRCTL_SET_BRIDGE_MAX_AGE 10 -#define BRCTL_SET_AGEING_TIME 11 -#define BRCTL_SET_GC_INTERVAL 12 -#define BRCTL_GET_PORT_INFO 13 -#define BRCTL_SET_BRIDGE_STP_STATE 14 -#define BRCTL_SET_BRIDGE_PRIORITY 15 -#define BRCTL_SET_PORT_PRIORITY 16 -#define BRCTL_SET_PATH_COST 17 -#define BRCTL_GET_FDB_ENTRIES 18 - -#define BR_STATE_DISABLED 0 -#define BR_STATE_LISTENING 1 -#define BR_STATE_LEARNING 2 -#define BR_STATE_FORWARDING 3 -#define BR_STATE_BLOCKING 4 - -struct __bridge_info { - __u64 designated_root; - __u64 bridge_id; - __u32 root_path_cost; - __u32 max_age; - __u32 hello_time; - __u32 forward_delay; - __u32 bridge_max_age; - __u32 bridge_hello_time; - __u32 bridge_forward_delay; - __u8 topology_change; - __u8 topology_change_detected; - __u8 root_port; - __u8 stp_enabled; - __u32 ageing_time; - __u32 gc_interval; - __u32 hello_timer_value; - __u32 tcn_timer_value; - __u32 topology_change_timer_value; - __u32 gc_timer_value; -}; - -struct __port_info { - __u64 designated_root; - __u64 designated_bridge; - __u16 port_id; - __u16 designated_port; - __u32 path_cost; - __u32 designated_cost; - __u8 state; - __u8 top_change_ack; - __u8 config_pending; - __u8 unused0; - __u32 message_age_timer_value; - __u32 forward_delay_timer_value; - __u32 hold_timer_value; -}; - -struct __fdb_entry { - __u8 mac_addr[6]; - __u8 port_no; - __u8 is_local; - __u32 ageing_timer_value; - __u8 port_hi; - __u8 pad0; - __u16 unused; -}; - -#ifdef __KERNEL__ #include <linux/netdevice.h> +#include <uapi/linux/if_bridge.h> extern void brioctl_set(int (*ioctl_hook)(struct net *, unsigned int, void __user *)); @@ -107,5 +22,3 @@ typedef int br_should_route_hook_t(struct sk_buff *skb); extern br_should_route_hook_t __rcu *br_should_route_hook; #endif - -#endif diff --git a/include/linux/if_eql.h b/include/linux/if_eql.h index 18a5d02a864..d984694c384 100644 --- a/include/linux/if_eql.h +++ b/include/linux/if_eql.h @@ -15,28 +15,13 @@ * McLean VA 22101 * Phone: 1-703-847-0040 ext 103 */ - #ifndef _LINUX_IF_EQL_H #define _LINUX_IF_EQL_H -#define EQL_DEFAULT_SLAVE_PRIORITY 28800 -#define EQL_DEFAULT_MAX_SLAVES 4 -#define EQL_DEFAULT_MTU 576 -#define EQL_DEFAULT_RESCHED_IVAL HZ - -#define EQL_ENSLAVE (SIOCDEVPRIVATE) -#define EQL_EMANCIPATE (SIOCDEVPRIVATE + 1) - -#define EQL_GETSLAVECFG (SIOCDEVPRIVATE + 2) -#define EQL_SETSLAVECFG (SIOCDEVPRIVATE + 3) - -#define EQL_GETMASTRCFG (SIOCDEVPRIVATE + 4) -#define EQL_SETMASTRCFG (SIOCDEVPRIVATE + 5) - -#ifdef __KERNEL__ #include <linux/timer.h> #include <linux/spinlock.h> +#include <uapi/linux/if_eql.h> typedef struct slave { struct list_head list; @@ -61,23 +46,4 @@ typedef struct equalizer { struct timer_list timer; } equalizer_t; -#endif /* __KERNEL__ */ - -typedef struct master_config { - char master_name[16]; - int max_slaves; - int min_slaves; -} master_config_t; - -typedef struct slave_config { - char slave_name[16]; - long priority; -} slave_config_t; - -typedef struct slaving_request { - char slave_name[16]; - long priority; -} slaving_request_t; - - #endif /* _LINUX_EQL_H */ diff --git a/include/linux/if_ether.h b/include/linux/if_ether.h index 167ce5b363d..12b4d55a02a 100644 --- a/include/linux/if_ether.h +++ b/include/linux/if_ether.h @@ -17,122 +17,11 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ - #ifndef _LINUX_IF_ETHER_H #define _LINUX_IF_ETHER_H -#include <linux/types.h> - -/* - * IEEE 802.3 Ethernet magic constants. The frame sizes omit the preamble - * and FCS/CRC (frame check sequence). - */ - -#define ETH_ALEN 6 /* Octets in one ethernet addr */ -#define ETH_HLEN 14 /* Total octets in header. */ -#define ETH_ZLEN 60 /* Min. octets in frame sans FCS */ -#define ETH_DATA_LEN 1500 /* Max. octets in payload */ -#define ETH_FRAME_LEN 1514 /* Max. octets in frame sans FCS */ -#define ETH_FCS_LEN 4 /* Octets in the FCS */ - -/* - * These are the defined Ethernet Protocol ID's. - */ - -#define ETH_P_LOOP 0x0060 /* Ethernet Loopback packet */ -#define ETH_P_PUP 0x0200 /* Xerox PUP packet */ -#define ETH_P_PUPAT 0x0201 /* Xerox PUP Addr Trans packet */ -#define ETH_P_IP 0x0800 /* Internet Protocol packet */ -#define ETH_P_X25 0x0805 /* CCITT X.25 */ -#define ETH_P_ARP 0x0806 /* Address Resolution packet */ -#define ETH_P_BPQ 0x08FF /* G8BPQ AX.25 Ethernet Packet [ NOT AN OFFICIALLY REGISTERED ID ] */ -#define ETH_P_IEEEPUP 0x0a00 /* Xerox IEEE802.3 PUP packet */ -#define ETH_P_IEEEPUPAT 0x0a01 /* Xerox IEEE802.3 PUP Addr Trans packet */ -#define ETH_P_DEC 0x6000 /* DEC Assigned proto */ -#define ETH_P_DNA_DL 0x6001 /* DEC DNA Dump/Load */ -#define ETH_P_DNA_RC 0x6002 /* DEC DNA Remote Console */ -#define ETH_P_DNA_RT 0x6003 /* DEC DNA Routing */ -#define ETH_P_LAT 0x6004 /* DEC LAT */ -#define ETH_P_DIAG 0x6005 /* DEC Diagnostics */ -#define ETH_P_CUST 0x6006 /* DEC Customer use */ -#define ETH_P_SCA 0x6007 /* DEC Systems Comms Arch */ -#define ETH_P_TEB 0x6558 /* Trans Ether Bridging */ -#define ETH_P_RARP 0x8035 /* Reverse Addr Res packet */ -#define ETH_P_ATALK 0x809B /* Appletalk DDP */ -#define ETH_P_AARP 0x80F3 /* Appletalk AARP */ -#define ETH_P_8021Q 0x8100 /* 802.1Q VLAN Extended Header */ -#define ETH_P_IPX 0x8137 /* IPX over DIX */ -#define ETH_P_IPV6 0x86DD /* IPv6 over bluebook */ -#define ETH_P_PAUSE 0x8808 /* IEEE Pause frames. See 802.3 31B */ -#define ETH_P_SLOW 0x8809 /* Slow Protocol. See 802.3ad 43B */ -#define ETH_P_WCCP 0x883E /* Web-cache coordination protocol - * defined in draft-wilson-wrec-wccp-v2-00.txt */ -#define ETH_P_PPP_DISC 0x8863 /* PPPoE discovery messages */ -#define ETH_P_PPP_SES 0x8864 /* PPPoE session messages */ -#define ETH_P_MPLS_UC 0x8847 /* MPLS Unicast traffic */ -#define ETH_P_MPLS_MC 0x8848 /* MPLS Multicast traffic */ -#define ETH_P_ATMMPOA 0x884c /* MultiProtocol Over ATM */ -#define ETH_P_LINK_CTL 0x886c /* HPNA, wlan link local tunnel */ -#define ETH_P_ATMFATE 0x8884 /* Frame-based ATM Transport - * over Ethernet - */ -#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */ -#define ETH_P_AOE 0x88A2 /* ATA over Ethernet */ -#define ETH_P_8021AD 0x88A8 /* 802.1ad Service VLAN */ -#define ETH_P_802_EX1 0x88B5 /* 802.1 Local Experimental 1. */ -#define ETH_P_TIPC 0x88CA /* TIPC */ -#define ETH_P_8021AH 0x88E7 /* 802.1ah Backbone Service Tag */ -#define ETH_P_1588 0x88F7 /* IEEE 1588 Timesync */ -#define ETH_P_FCOE 0x8906 /* Fibre Channel over Ethernet */ -#define ETH_P_TDLS 0x890D /* TDLS */ -#define ETH_P_FIP 0x8914 /* FCoE Initialization Protocol */ -#define ETH_P_QINQ1 0x9100 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */ -#define ETH_P_QINQ2 0x9200 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */ -#define ETH_P_QINQ3 0x9300 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */ -#define ETH_P_EDSA 0xDADA /* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */ -#define ETH_P_AF_IUCV 0xFBFB /* IBM af_iucv [ NOT AN OFFICIALLY REGISTERED ID ] */ - -/* - * Non DIX types. Won't clash for 1500 types. - */ - -#define ETH_P_802_3 0x0001 /* Dummy type for 802.3 frames */ -#define ETH_P_AX25 0x0002 /* Dummy protocol id for AX.25 */ -#define ETH_P_ALL 0x0003 /* Every packet (be careful!!!) */ -#define ETH_P_802_2 0x0004 /* 802.2 frames */ -#define ETH_P_SNAP 0x0005 /* Internal only */ -#define ETH_P_DDCMP 0x0006 /* DEC DDCMP: Internal only */ -#define ETH_P_WAN_PPP 0x0007 /* Dummy type for WAN PPP frames*/ -#define ETH_P_PPP_MP 0x0008 /* Dummy type for PPP MP frames */ -#define ETH_P_LOCALTALK 0x0009 /* Localtalk pseudo type */ -#define ETH_P_CAN 0x000C /* CAN: Controller Area Network */ -#define ETH_P_CANFD 0x000D /* CANFD: CAN flexible data rate*/ -#define ETH_P_PPPTALK 0x0010 /* Dummy type for Atalk over PPP*/ -#define ETH_P_TR_802_2 0x0011 /* 802.2 frames */ -#define ETH_P_MOBITEX 0x0015 /* Mobitex (kaz@cafe.net) */ -#define ETH_P_CONTROL 0x0016 /* Card specific control frames */ -#define ETH_P_IRDA 0x0017 /* Linux-IrDA */ -#define ETH_P_ECONET 0x0018 /* Acorn Econet */ -#define ETH_P_HDLC 0x0019 /* HDLC frames */ -#define ETH_P_ARCNET 0x001A /* 1A for ArcNet :-) */ -#define ETH_P_DSA 0x001B /* Distributed Switch Arch. */ -#define ETH_P_TRAILER 0x001C /* Trailer switch tagging */ -#define ETH_P_PHONET 0x00F5 /* Nokia Phonet frames */ -#define ETH_P_IEEE802154 0x00F6 /* IEEE802.15.4 frame */ -#define ETH_P_CAIF 0x00F7 /* ST-Ericsson CAIF protocol */ - -/* - * This is an Ethernet frame header. - */ - -struct ethhdr { - unsigned char h_dest[ETH_ALEN]; /* destination eth addr */ - unsigned char h_source[ETH_ALEN]; /* source ether addr */ - __be16 h_proto; /* packet type ID field */ -} __attribute__((packed)); - -#ifdef __KERNEL__ #include <linux/skbuff.h> +#include <uapi/linux/if_ether.h> static inline struct ethhdr *eth_hdr(const struct sk_buff *skb) { @@ -144,6 +33,4 @@ int eth_header_parse(const struct sk_buff *skb, unsigned char *haddr); int mac_pton(const char *s, u8 *mac); extern ssize_t sysfs_format_mac(char *buf, const unsigned char *addr, int len); -#endif - #endif /* _LINUX_IF_ETHER_H */ diff --git a/include/linux/if_fddi.h b/include/linux/if_fddi.h index e6dc11e7f9a..f5550b3eeea 100644 --- a/include/linux/if_fddi.h +++ b/include/linux/if_fddi.h @@ -24,84 +24,8 @@ #ifndef _LINUX_IF_FDDI_H #define _LINUX_IF_FDDI_H -#include <linux/types.h> - -/* - * Define max and min legal sizes. The frame sizes do not include - * 4 byte FCS/CRC (frame check sequence). - */ -#define FDDI_K_ALEN 6 /* Octets in one FDDI address */ -#define FDDI_K_8022_HLEN 16 /* Total octets in 802.2 header */ -#define FDDI_K_SNAP_HLEN 21 /* Total octets in 802.2 SNAP header */ -#define FDDI_K_8022_ZLEN 16 /* Min octets in 802.2 frame sans FCS */ -#define FDDI_K_SNAP_ZLEN 21 /* Min octets in 802.2 SNAP frame sans FCS */ -#define FDDI_K_8022_DLEN 4475 /* Max octets in 802.2 payload */ -#define FDDI_K_SNAP_DLEN 4470 /* Max octets in 802.2 SNAP payload */ -#define FDDI_K_LLC_ZLEN 13 /* Min octets in LLC frame sans FCS */ -#define FDDI_K_LLC_LEN 4491 /* Max octets in LLC frame sans FCS */ - -/* Define FDDI Frame Control (FC) Byte values */ -#define FDDI_FC_K_VOID 0x00 -#define FDDI_FC_K_NON_RESTRICTED_TOKEN 0x80 -#define FDDI_FC_K_RESTRICTED_TOKEN 0xC0 -#define FDDI_FC_K_SMT_MIN 0x41 -#define FDDI_FC_K_SMT_MAX 0x4F -#define FDDI_FC_K_MAC_MIN 0xC1 -#define FDDI_FC_K_MAC_MAX 0xCF -#define FDDI_FC_K_ASYNC_LLC_MIN 0x50 -#define FDDI_FC_K_ASYNC_LLC_DEF 0x54 -#define FDDI_FC_K_ASYNC_LLC_MAX 0x5F -#define FDDI_FC_K_SYNC_LLC_MIN 0xD0 -#define FDDI_FC_K_SYNC_LLC_MAX 0xD7 -#define FDDI_FC_K_IMPLEMENTOR_MIN 0x60 -#define FDDI_FC_K_IMPLEMENTOR_MAX 0x6F -#define FDDI_FC_K_RESERVED_MIN 0x70 -#define FDDI_FC_K_RESERVED_MAX 0x7F - -/* Define LLC and SNAP constants */ -#define FDDI_EXTENDED_SAP 0xAA -#define FDDI_UI_CMD 0x03 - -/* Define 802.2 Type 1 header */ -struct fddi_8022_1_hdr { - __u8 dsap; /* destination service access point */ - __u8 ssap; /* source service access point */ - __u8 ctrl; /* control byte #1 */ -} __attribute__((packed)); - -/* Define 802.2 Type 2 header */ -struct fddi_8022_2_hdr { - __u8 dsap; /* destination service access point */ - __u8 ssap; /* source service access point */ - __u8 ctrl_1; /* control byte #1 */ - __u8 ctrl_2; /* control byte #2 */ -} __attribute__((packed)); - -/* Define 802.2 SNAP header */ -#define FDDI_K_OUI_LEN 3 -struct fddi_snap_hdr { - __u8 dsap; /* always 0xAA */ - __u8 ssap; /* always 0xAA */ - __u8 ctrl; /* always 0x03 */ - __u8 oui[FDDI_K_OUI_LEN]; /* organizational universal id */ - __be16 ethertype; /* packet type ID field */ -} __attribute__((packed)); - -/* Define FDDI LLC frame header */ -struct fddihdr { - __u8 fc; /* frame control */ - __u8 daddr[FDDI_K_ALEN]; /* destination address */ - __u8 saddr[FDDI_K_ALEN]; /* source address */ - union - { - struct fddi_8022_1_hdr llc_8022_1; - struct fddi_8022_2_hdr llc_8022_2; - struct fddi_snap_hdr llc_snap; - } hdr; -} __attribute__((packed)); - -#ifdef __KERNEL__ #include <linux/netdevice.h> +#include <uapi/linux/if_fddi.h> /* Define FDDI statistics structure */ struct fddi_statistics { @@ -194,6 +118,4 @@ struct fddi_statistics { __u32 port_ler_flag[2]; __u32 port_hardware_present[2]; }; -#endif /* __KERNEL__ */ - #endif /* _LINUX_IF_FDDI_H */ diff --git a/include/linux/if_frad.h b/include/linux/if_frad.h index 191ee0869bc..4316aa173dd 100644 --- a/include/linux/if_frad.h +++ b/include/linux/if_frad.h @@ -20,105 +20,11 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ - #ifndef _FRAD_H_ #define _FRAD_H_ -#include <linux/if.h> - -/* Structures and constants associated with the DLCI device driver */ - -struct dlci_add -{ - char devname[IFNAMSIZ]; - short dlci; -}; - -#define DLCI_GET_CONF (SIOCDEVPRIVATE + 2) -#define DLCI_SET_CONF (SIOCDEVPRIVATE + 3) - -/* - * These are related to the Sangoma SDLA and should remain in order. - * Code within the SDLA module is based on the specifics of this - * structure. Change at your own peril. - */ -struct dlci_conf { - short flags; - short CIR_fwd; - short Bc_fwd; - short Be_fwd; - short CIR_bwd; - short Bc_bwd; - short Be_bwd; - -/* these are part of the status read */ - short Tc_fwd; - short Tc_bwd; - short Tf_max; - short Tb_max; - -/* add any new fields here above is a mirror of sdla_dlci_conf */ -}; - -#define DLCI_GET_SLAVE (SIOCDEVPRIVATE + 4) - -/* configuration flags for DLCI */ -#define DLCI_IGNORE_CIR_OUT 0x0001 -#define DLCI_ACCOUNT_CIR_IN 0x0002 -#define DLCI_BUFFER_IF 0x0008 - -#define DLCI_VALID_FLAGS 0x000B +#include <uapi/linux/if_frad.h> -/* defines for the actual Frame Relay hardware */ -#define FRAD_GET_CONF (SIOCDEVPRIVATE) -#define FRAD_SET_CONF (SIOCDEVPRIVATE + 1) - -#define FRAD_LAST_IOCTL FRAD_SET_CONF - -/* - * Based on the setup for the Sangoma SDLA. If changes are - * necessary to this structure, a routine will need to be - * added to that module to copy fields. - */ -struct frad_conf -{ - short station; - short flags; - short kbaud; - short clocking; - short mtu; - short T391; - short T392; - short N391; - short N392; - short N393; - short CIR_fwd; - short Bc_fwd; - short Be_fwd; - short CIR_bwd; - short Bc_bwd; - short Be_bwd; - -/* Add new fields here, above is a mirror of the sdla_conf */ - -}; - -#define FRAD_STATION_CPE 0x0000 -#define FRAD_STATION_NODE 0x0001 - -#define FRAD_TX_IGNORE_CIR 0x0001 -#define FRAD_RX_ACCOUNT_CIR 0x0002 -#define FRAD_DROP_ABORTED 0x0004 -#define FRAD_BUFFERIF 0x0008 -#define FRAD_STATS 0x0010 -#define FRAD_MCI 0x0100 -#define FRAD_AUTODLCI 0x8000 -#define FRAD_VALID_FLAGS 0x811F - -#define FRAD_CLOCK_INT 0x0001 -#define FRAD_CLOCK_EXT 0x0000 - -#ifdef __KERNEL__ #if defined(CONFIG_DLCI) || defined(CONFIG_DLCI_MODULE) @@ -188,6 +94,4 @@ struct frad_local extern void dlci_ioctl_set(int (*hook)(unsigned int, void __user *)); -#endif /* __KERNEL__ */ - #endif diff --git a/include/linux/if_link.h b/include/linux/if_link.h index e4dad4ddf08..c3f817c3eb4 100644 --- a/include/linux/if_link.h +++ b/include/linux/if_link.h @@ -1,335 +1,8 @@ #ifndef _LINUX_IF_LINK_H #define _LINUX_IF_LINK_H -#include <linux/types.h> -#include <linux/netlink.h> +#include <uapi/linux/if_link.h> -/* This struct should be in sync with struct rtnl_link_stats64 */ -struct rtnl_link_stats { - __u32 rx_packets; /* total packets received */ - __u32 tx_packets; /* total packets transmitted */ - __u32 rx_bytes; /* total bytes received */ - __u32 tx_bytes; /* total bytes transmitted */ - __u32 rx_errors; /* bad packets received */ - __u32 tx_errors; /* packet transmit problems */ - __u32 rx_dropped; /* no space in linux buffers */ - __u32 tx_dropped; /* no space available in linux */ - __u32 multicast; /* multicast packets received */ - __u32 collisions; - - /* detailed rx_errors: */ - __u32 rx_length_errors; - __u32 rx_over_errors; /* receiver ring buff overflow */ - __u32 rx_crc_errors; /* recved pkt with crc error */ - __u32 rx_frame_errors; /* recv'd frame alignment error */ - __u32 rx_fifo_errors; /* recv'r fifo overrun */ - __u32 rx_missed_errors; /* receiver missed packet */ - - /* detailed tx_errors */ - __u32 tx_aborted_errors; - __u32 tx_carrier_errors; - __u32 tx_fifo_errors; - __u32 tx_heartbeat_errors; - __u32 tx_window_errors; - - /* for cslip etc */ - __u32 rx_compressed; - __u32 tx_compressed; -}; - -/* The main device statistics structure */ -struct rtnl_link_stats64 { - __u64 rx_packets; /* total packets received */ - __u64 tx_packets; /* total packets transmitted */ - __u64 rx_bytes; /* total bytes received */ - __u64 tx_bytes; /* total bytes transmitted */ - __u64 rx_errors; /* bad packets received */ - __u64 tx_errors; /* packet transmit problems */ - __u64 rx_dropped; /* no space in linux buffers */ - __u64 tx_dropped; /* no space available in linux */ - __u64 multicast; /* multicast packets received */ - __u64 collisions; - - /* detailed rx_errors: */ - __u64 rx_length_errors; - __u64 rx_over_errors; /* receiver ring buff overflow */ - __u64 rx_crc_errors; /* recved pkt with crc error */ - __u64 rx_frame_errors; /* recv'd frame alignment error */ - __u64 rx_fifo_errors; /* recv'r fifo overrun */ - __u64 rx_missed_errors; /* receiver missed packet */ - - /* detailed tx_errors */ - __u64 tx_aborted_errors; - __u64 tx_carrier_errors; - __u64 tx_fifo_errors; - __u64 tx_heartbeat_errors; - __u64 tx_window_errors; - - /* for cslip etc */ - __u64 rx_compressed; - __u64 tx_compressed; -}; - -/* The struct should be in sync with struct ifmap */ -struct rtnl_link_ifmap { - __u64 mem_start; - __u64 mem_end; - __u64 base_addr; - __u16 irq; - __u8 dma; - __u8 port; -}; - -/* - * IFLA_AF_SPEC - * Contains nested attributes for address family specific attributes. - * Each address family may create a attribute with the address family - * number as type and create its own attribute structure in it. - * - * Example: - * [IFLA_AF_SPEC] = { - * [AF_INET] = { - * [IFLA_INET_CONF] = ..., - * }, - * [AF_INET6] = { - * [IFLA_INET6_FLAGS] = ..., - * [IFLA_INET6_CONF] = ..., - * } - * } - */ - -enum { - IFLA_UNSPEC, - IFLA_ADDRESS, - IFLA_BROADCAST, - IFLA_IFNAME, - IFLA_MTU, - IFLA_LINK, - IFLA_QDISC, - IFLA_STATS, - IFLA_COST, -#define IFLA_COST IFLA_COST - IFLA_PRIORITY, -#define IFLA_PRIORITY IFLA_PRIORITY - IFLA_MASTER, -#define IFLA_MASTER IFLA_MASTER - IFLA_WIRELESS, /* Wireless Extension event - see wireless.h */ -#define IFLA_WIRELESS IFLA_WIRELESS - IFLA_PROTINFO, /* Protocol specific information for a link */ -#define IFLA_PROTINFO IFLA_PROTINFO - IFLA_TXQLEN, -#define IFLA_TXQLEN IFLA_TXQLEN - IFLA_MAP, -#define IFLA_MAP IFLA_MAP - IFLA_WEIGHT, -#define IFLA_WEIGHT IFLA_WEIGHT - IFLA_OPERSTATE, - IFLA_LINKMODE, - IFLA_LINKINFO, -#define IFLA_LINKINFO IFLA_LINKINFO - IFLA_NET_NS_PID, - IFLA_IFALIAS, - IFLA_NUM_VF, /* Number of VFs if device is SR-IOV PF */ - IFLA_VFINFO_LIST, - IFLA_STATS64, - IFLA_VF_PORTS, - IFLA_PORT_SELF, - IFLA_AF_SPEC, - IFLA_GROUP, /* Group the device belongs to */ - IFLA_NET_NS_FD, - IFLA_EXT_MASK, /* Extended info mask, VFs, etc */ - IFLA_PROMISCUITY, /* Promiscuity count: > 0 means acts PROMISC */ -#define IFLA_PROMISCUITY IFLA_PROMISCUITY - IFLA_NUM_TX_QUEUES, - IFLA_NUM_RX_QUEUES, - __IFLA_MAX -}; - - -#define IFLA_MAX (__IFLA_MAX - 1) - -/* backwards compatibility for userspace */ -#ifndef __KERNEL__ -#define IFLA_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct ifinfomsg)))) -#define IFLA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct ifinfomsg)) -#endif - -enum { - IFLA_INET_UNSPEC, - IFLA_INET_CONF, - __IFLA_INET_MAX, -}; - -#define IFLA_INET_MAX (__IFLA_INET_MAX - 1) - -/* ifi_flags. - - IFF_* flags. - - The only change is: - IFF_LOOPBACK, IFF_BROADCAST and IFF_POINTOPOINT are - more not changeable by user. They describe link media - characteristics and set by device driver. - - Comments: - - Combination IFF_BROADCAST|IFF_POINTOPOINT is invalid - - If neither of these three flags are set; - the interface is NBMA. - - - IFF_MULTICAST does not mean anything special: - multicasts can be used on all not-NBMA links. - IFF_MULTICAST means that this media uses special encapsulation - for multicast frames. Apparently, all IFF_POINTOPOINT and - IFF_BROADCAST devices are able to use multicasts too. - */ - -/* IFLA_LINK. - For usual devices it is equal ifi_index. - If it is a "virtual interface" (f.e. tunnel), ifi_link - can point to real physical interface (f.e. for bandwidth calculations), - or maybe 0, what means, that real media is unknown (usual - for IPIP tunnels, when route to endpoint is allowed to change) - */ - -/* Subtype attributes for IFLA_PROTINFO */ -enum { - IFLA_INET6_UNSPEC, - IFLA_INET6_FLAGS, /* link flags */ - IFLA_INET6_CONF, /* sysctl parameters */ - IFLA_INET6_STATS, /* statistics */ - IFLA_INET6_MCAST, /* MC things. What of them? */ - IFLA_INET6_CACHEINFO, /* time values and max reasm size */ - IFLA_INET6_ICMP6STATS, /* statistics (icmpv6) */ - __IFLA_INET6_MAX -}; - -#define IFLA_INET6_MAX (__IFLA_INET6_MAX - 1) - -struct ifla_cacheinfo { - __u32 max_reasm_len; - __u32 tstamp; /* ipv6InterfaceTable updated timestamp */ - __u32 reachable_time; - __u32 retrans_time; -}; - -enum { - IFLA_INFO_UNSPEC, - IFLA_INFO_KIND, - IFLA_INFO_DATA, - IFLA_INFO_XSTATS, - __IFLA_INFO_MAX, -}; - -#define IFLA_INFO_MAX (__IFLA_INFO_MAX - 1) - -/* VLAN section */ - -enum { - IFLA_VLAN_UNSPEC, - IFLA_VLAN_ID, - IFLA_VLAN_FLAGS, - IFLA_VLAN_EGRESS_QOS, - IFLA_VLAN_INGRESS_QOS, - __IFLA_VLAN_MAX, -}; - -#define IFLA_VLAN_MAX (__IFLA_VLAN_MAX - 1) - -struct ifla_vlan_flags { - __u32 flags; - __u32 mask; -}; - -enum { - IFLA_VLAN_QOS_UNSPEC, - IFLA_VLAN_QOS_MAPPING, - __IFLA_VLAN_QOS_MAX -}; - -#define IFLA_VLAN_QOS_MAX (__IFLA_VLAN_QOS_MAX - 1) - -struct ifla_vlan_qos_mapping { - __u32 from; - __u32 to; -}; - -/* MACVLAN section */ -enum { - IFLA_MACVLAN_UNSPEC, - IFLA_MACVLAN_MODE, - IFLA_MACVLAN_FLAGS, - __IFLA_MACVLAN_MAX, -}; - -#define IFLA_MACVLAN_MAX (__IFLA_MACVLAN_MAX - 1) - -enum macvlan_mode { - MACVLAN_MODE_PRIVATE = 1, /* don't talk to other macvlans */ - MACVLAN_MODE_VEPA = 2, /* talk to other ports through ext bridge */ - MACVLAN_MODE_BRIDGE = 4, /* talk to bridge ports directly */ - MACVLAN_MODE_PASSTHRU = 8,/* take over the underlying device */ -}; - -#define MACVLAN_FLAG_NOPROMISC 1 - -/* VXLAN section */ -enum { - IFLA_VXLAN_UNSPEC, - IFLA_VXLAN_ID, - IFLA_VXLAN_GROUP, - IFLA_VXLAN_LINK, - IFLA_VXLAN_LOCAL, - IFLA_VXLAN_TTL, - IFLA_VXLAN_TOS, - IFLA_VXLAN_LEARNING, - IFLA_VXLAN_AGEING, - IFLA_VXLAN_LIMIT, - __IFLA_VXLAN_MAX -}; -#define IFLA_VXLAN_MAX (__IFLA_VXLAN_MAX - 1) - -/* SR-IOV virtual function management section */ - -enum { - IFLA_VF_INFO_UNSPEC, - IFLA_VF_INFO, - __IFLA_VF_INFO_MAX, -}; - -#define IFLA_VF_INFO_MAX (__IFLA_VF_INFO_MAX - 1) - -enum { - IFLA_VF_UNSPEC, - IFLA_VF_MAC, /* Hardware queue specific attributes */ - IFLA_VF_VLAN, - IFLA_VF_TX_RATE, /* TX Bandwidth Allocation */ - IFLA_VF_SPOOFCHK, /* Spoof Checking on/off switch */ - __IFLA_VF_MAX, -}; - -#define IFLA_VF_MAX (__IFLA_VF_MAX - 1) - -struct ifla_vf_mac { - __u32 vf; - __u8 mac[32]; /* MAX_ADDR_LEN */ -}; - -struct ifla_vf_vlan { - __u32 vf; - __u32 vlan; /* 0 - 4095, 0 disables VLAN filter */ - __u32 qos; -}; - -struct ifla_vf_tx_rate { - __u32 vf; - __u32 rate; /* Max TX bandwidth in Mbps, 0 disables throttling */ -}; - -struct ifla_vf_spoofchk { - __u32 vf; - __u32 setting; -}; -#ifdef __KERNEL__ /* We don't want this structure exposed to user space */ struct ifla_vf_info { @@ -340,96 +13,4 @@ struct ifla_vf_info { __u32 tx_rate; __u32 spoofchk; }; -#endif - -/* VF ports management section - * - * Nested layout of set/get msg is: - * - * [IFLA_NUM_VF] - * [IFLA_VF_PORTS] - * [IFLA_VF_PORT] - * [IFLA_PORT_*], ... - * [IFLA_VF_PORT] - * [IFLA_PORT_*], ... - * ... - * [IFLA_PORT_SELF] - * [IFLA_PORT_*], ... - */ - -enum { - IFLA_VF_PORT_UNSPEC, - IFLA_VF_PORT, /* nest */ - __IFLA_VF_PORT_MAX, -}; - -#define IFLA_VF_PORT_MAX (__IFLA_VF_PORT_MAX - 1) - -enum { - IFLA_PORT_UNSPEC, - IFLA_PORT_VF, /* __u32 */ - IFLA_PORT_PROFILE, /* string */ - IFLA_PORT_VSI_TYPE, /* 802.1Qbg (pre-)standard VDP */ - IFLA_PORT_INSTANCE_UUID, /* binary UUID */ - IFLA_PORT_HOST_UUID, /* binary UUID */ - IFLA_PORT_REQUEST, /* __u8 */ - IFLA_PORT_RESPONSE, /* __u16, output only */ - __IFLA_PORT_MAX, -}; - -#define IFLA_PORT_MAX (__IFLA_PORT_MAX - 1) - -#define PORT_PROFILE_MAX 40 -#define PORT_UUID_MAX 16 -#define PORT_SELF_VF -1 - -enum { - PORT_REQUEST_PREASSOCIATE = 0, - PORT_REQUEST_PREASSOCIATE_RR, - PORT_REQUEST_ASSOCIATE, - PORT_REQUEST_DISASSOCIATE, -}; - -enum { - PORT_VDP_RESPONSE_SUCCESS = 0, - PORT_VDP_RESPONSE_INVALID_FORMAT, - PORT_VDP_RESPONSE_INSUFFICIENT_RESOURCES, - PORT_VDP_RESPONSE_UNUSED_VTID, - PORT_VDP_RESPONSE_VTID_VIOLATION, - PORT_VDP_RESPONSE_VTID_VERSION_VIOALTION, - PORT_VDP_RESPONSE_OUT_OF_SYNC, - /* 0x08-0xFF reserved for future VDP use */ - PORT_PROFILE_RESPONSE_SUCCESS = 0x100, - PORT_PROFILE_RESPONSE_INPROGRESS, - PORT_PROFILE_RESPONSE_INVALID, - PORT_PROFILE_RESPONSE_BADSTATE, - PORT_PROFILE_RESPONSE_INSUFFICIENT_RESOURCES, - PORT_PROFILE_RESPONSE_ERROR, -}; - -struct ifla_port_vsi { - __u8 vsi_mgr_id; - __u8 vsi_type_id[3]; - __u8 vsi_type_version; - __u8 pad[3]; -}; - - -/* IPoIB section */ - -enum { - IFLA_IPOIB_UNSPEC, - IFLA_IPOIB_PKEY, - IFLA_IPOIB_MODE, - IFLA_IPOIB_UMCAST, - __IFLA_IPOIB_MAX -}; - -enum { - IPOIB_MODE_DATAGRAM = 0, /* using unreliable datagram QPs */ - IPOIB_MODE_CONNECTED = 1, /* using connected QPs */ -}; - -#define IFLA_IPOIB_MAX (__IFLA_IPOIB_MAX - 1) - #endif /* _LINUX_IF_LINK_H */ diff --git a/include/linux/if_ltalk.h b/include/linux/if_ltalk.h index 76525760ba4..81e434c5079 100644 --- a/include/linux/if_ltalk.h +++ b/include/linux/if_ltalk.h @@ -1,12 +1,7 @@ #ifndef __LINUX_LTALK_H #define __LINUX_LTALK_H -#define LTALK_HLEN 1 -#define LTALK_MTU 600 -#define LTALK_ALEN 1 +#include <uapi/linux/if_ltalk.h> -#ifdef __KERNEL__ extern struct net_device *alloc_ltalkdev(int sizeof_priv); #endif - -#endif diff --git a/include/linux/if_phonet.h b/include/linux/if_phonet.h index d70034bcec0..bbcdb0a767d 100644 --- a/include/linux/if_phonet.h +++ b/include/linux/if_phonet.h @@ -8,12 +8,7 @@ #ifndef LINUX_IF_PHONET_H #define LINUX_IF_PHONET_H -#define PHONET_MIN_MTU 6 /* pn_length = 0 */ -#define PHONET_MAX_MTU 65541 /* pn_length = 0xffff */ -#define PHONET_DEV_MTU PHONET_MAX_MTU +#include <uapi/linux/if_phonet.h> -#ifdef __KERNEL__ extern struct header_ops phonet_header_ops; #endif - -#endif diff --git a/include/linux/if_pppol2tp.h b/include/linux/if_pppol2tp.h index b4775418d52..0fb71e532b2 100644 --- a/include/linux/if_pppol2tp.h +++ b/include/linux/if_pppol2tp.h @@ -11,98 +11,11 @@ * 2 of the License, or (at your option) any later version. * */ - #ifndef __LINUX_IF_PPPOL2TP_H #define __LINUX_IF_PPPOL2TP_H -#include <linux/types.h> - -#ifdef __KERNEL__ #include <linux/in.h> #include <linux/in6.h> -#endif - -/* Structure used to connect() the socket to a particular tunnel UDP - * socket over IPv4. - */ -struct pppol2tp_addr { - __kernel_pid_t pid; /* pid that owns the fd. - * 0 => current */ - int fd; /* FD of UDP socket to use */ - - struct sockaddr_in addr; /* IP address and port to send to */ - - __u16 s_tunnel, s_session; /* For matching incoming packets */ - __u16 d_tunnel, d_session; /* For sending outgoing packets */ -}; - -/* Structure used to connect() the socket to a particular tunnel UDP - * socket over IPv6. - */ -struct pppol2tpin6_addr { - __kernel_pid_t pid; /* pid that owns the fd. - * 0 => current */ - int fd; /* FD of UDP socket to use */ - - __u16 s_tunnel, s_session; /* For matching incoming packets */ - __u16 d_tunnel, d_session; /* For sending outgoing packets */ - - struct sockaddr_in6 addr; /* IP address and port to send to */ -}; - -/* The L2TPv3 protocol changes tunnel and session ids from 16 to 32 - * bits. So we need a different sockaddr structure. - */ -struct pppol2tpv3_addr { - __kernel_pid_t pid; /* pid that owns the fd. - * 0 => current */ - int fd; /* FD of UDP or IP socket to use */ - - struct sockaddr_in addr; /* IP address and port to send to */ - - __u32 s_tunnel, s_session; /* For matching incoming packets */ - __u32 d_tunnel, d_session; /* For sending outgoing packets */ -}; - -struct pppol2tpv3in6_addr { - __kernel_pid_t pid; /* pid that owns the fd. - * 0 => current */ - int fd; /* FD of UDP or IP socket to use */ - - __u32 s_tunnel, s_session; /* For matching incoming packets */ - __u32 d_tunnel, d_session; /* For sending outgoing packets */ - - struct sockaddr_in6 addr; /* IP address and port to send to */ -}; - -/* Socket options: - * DEBUG - bitmask of debug message categories - * SENDSEQ - 0 => don't send packets with sequence numbers - * 1 => send packets with sequence numbers - * RECVSEQ - 0 => receive packet sequence numbers are optional - * 1 => drop receive packets without sequence numbers - * LNSMODE - 0 => act as LAC. - * 1 => act as LNS. - * REORDERTO - reorder timeout (in millisecs). If 0, don't try to reorder. - */ -enum { - PPPOL2TP_SO_DEBUG = 1, - PPPOL2TP_SO_RECVSEQ = 2, - PPPOL2TP_SO_SENDSEQ = 3, - PPPOL2TP_SO_LNSMODE = 4, - PPPOL2TP_SO_REORDERTO = 5, -}; - -/* Debug message categories for the DEBUG socket option */ -enum { - PPPOL2TP_MSG_DEBUG = (1 << 0), /* verbose debug (if - * compiled in) */ - PPPOL2TP_MSG_CONTROL = (1 << 1), /* userspace - kernel - * interface */ - PPPOL2TP_MSG_SEQ = (1 << 2), /* sequence numbers */ - PPPOL2TP_MSG_DATA = (1 << 3), /* data packets */ -}; - - +#include <uapi/linux/if_pppol2tp.h> #endif diff --git a/include/linux/if_pppox.h b/include/linux/if_pppox.h index 09c474c480c..aff7ad8a4ea 100644 --- a/include/linux/if_pppox.h +++ b/include/linux/if_pppox.h @@ -12,153 +12,14 @@ * 2 of the License, or (at your option) any later version. * */ - #ifndef __LINUX_IF_PPPOX_H #define __LINUX_IF_PPPOX_H - -#include <linux/types.h> -#include <asm/byteorder.h> - -#include <linux/socket.h> -#include <linux/if_ether.h> -#ifdef __KERNEL__ #include <linux/if.h> #include <linux/netdevice.h> #include <linux/ppp_channel.h> -#endif /* __KERNEL__ */ -#include <linux/if_pppol2tp.h> - -/* For user-space programs to pick up these definitions - * which they wouldn't get otherwise without defining __KERNEL__ - */ -#ifndef AF_PPPOX -#define AF_PPPOX 24 -#define PF_PPPOX AF_PPPOX -#endif /* !(AF_PPPOX) */ - -/************************************************************************ - * PPPoE addressing definition - */ -typedef __be16 sid_t; -struct pppoe_addr { - sid_t sid; /* Session identifier */ - unsigned char remote[ETH_ALEN]; /* Remote address */ - char dev[IFNAMSIZ]; /* Local device to use */ -}; - -/************************************************************************ - * PPTP addressing definition - */ -struct pptp_addr { - __be16 call_id; - struct in_addr sin_addr; -}; - -/************************************************************************ - * Protocols supported by AF_PPPOX - */ -#define PX_PROTO_OE 0 /* Currently just PPPoE */ -#define PX_PROTO_OL2TP 1 /* Now L2TP also */ -#define PX_PROTO_PPTP 2 -#define PX_MAX_PROTO 3 - -struct sockaddr_pppox { - __kernel_sa_family_t sa_family; /* address family, AF_PPPOX */ - unsigned int sa_protocol; /* protocol identifier */ - union { - struct pppoe_addr pppoe; - struct pptp_addr pptp; - } sa_addr; -} __packed; - -/* The use of the above union isn't viable because the size of this - * struct must stay fixed over time -- applications use sizeof(struct - * sockaddr_pppox) to fill it. We use a protocol specific sockaddr - * type instead. - */ -struct sockaddr_pppol2tp { - __kernel_sa_family_t sa_family; /* address family, AF_PPPOX */ - unsigned int sa_protocol; /* protocol identifier */ - struct pppol2tp_addr pppol2tp; -} __packed; - -struct sockaddr_pppol2tpin6 { - __kernel_sa_family_t sa_family; /* address family, AF_PPPOX */ - unsigned int sa_protocol; /* protocol identifier */ - struct pppol2tpin6_addr pppol2tp; -} __packed; - -/* The L2TPv3 protocol changes tunnel and session ids from 16 to 32 - * bits. So we need a different sockaddr structure. - */ -struct sockaddr_pppol2tpv3 { - __kernel_sa_family_t sa_family; /* address family, AF_PPPOX */ - unsigned int sa_protocol; /* protocol identifier */ - struct pppol2tpv3_addr pppol2tp; -} __packed; - -struct sockaddr_pppol2tpv3in6 { - __kernel_sa_family_t sa_family; /* address family, AF_PPPOX */ - unsigned int sa_protocol; /* protocol identifier */ - struct pppol2tpv3in6_addr pppol2tp; -} __packed; - -/********************************************************************* - * - * ioctl interface for defining forwarding of connections - * - ********************************************************************/ - -#define PPPOEIOCSFWD _IOW(0xB1 ,0, size_t) -#define PPPOEIOCDFWD _IO(0xB1 ,1) -/*#define PPPOEIOCGFWD _IOWR(0xB1,2, size_t)*/ - -/* Codes to identify message types */ -#define PADI_CODE 0x09 -#define PADO_CODE 0x07 -#define PADR_CODE 0x19 -#define PADS_CODE 0x65 -#define PADT_CODE 0xa7 -struct pppoe_tag { - __be16 tag_type; - __be16 tag_len; - char tag_data[0]; -} __attribute__ ((packed)); - -/* Tag identifiers */ -#define PTT_EOL __cpu_to_be16(0x0000) -#define PTT_SRV_NAME __cpu_to_be16(0x0101) -#define PTT_AC_NAME __cpu_to_be16(0x0102) -#define PTT_HOST_UNIQ __cpu_to_be16(0x0103) -#define PTT_AC_COOKIE __cpu_to_be16(0x0104) -#define PTT_VENDOR __cpu_to_be16(0x0105) -#define PTT_RELAY_SID __cpu_to_be16(0x0110) -#define PTT_SRV_ERR __cpu_to_be16(0x0201) -#define PTT_SYS_ERR __cpu_to_be16(0x0202) -#define PTT_GEN_ERR __cpu_to_be16(0x0203) - -struct pppoe_hdr { -#if defined(__LITTLE_ENDIAN_BITFIELD) - __u8 ver : 4; - __u8 type : 4; -#elif defined(__BIG_ENDIAN_BITFIELD) - __u8 type : 4; - __u8 ver : 4; -#else -#error "Please fix <asm/byteorder.h>" -#endif - __u8 code; - __be16 sid; - __be16 length; - struct pppoe_tag tag[0]; -} __packed; - -/* Length of entire PPPoE + PPP header */ -#define PPPOE_SES_HLEN 8 - -#ifdef __KERNEL__ #include <linux/skbuff.h> +#include <uapi/linux/if_pppox.h> static inline struct pppoe_hdr *pppoe_hdr(const struct sk_buff *skb) { @@ -232,6 +93,4 @@ enum { PPPOX_DEAD = 16 /* dead, useless, please clean me up!*/ }; -#endif /* __KERNEL__ */ - #endif /* !(__LINUX_IF_PPPOX_H) */ diff --git a/include/linux/if_team.h b/include/linux/if_team.h index 6d88a7f5768..0245def2aa9 100644 --- a/include/linux/if_team.h +++ b/include/linux/if_team.h @@ -7,14 +7,13 @@ * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. */ - #ifndef _LINUX_IF_TEAM_H_ #define _LINUX_IF_TEAM_H_ -#ifdef __KERNEL__ #include <linux/netpoll.h> #include <net/sch_generic.h> +#include <uapi/linux/if_team.h> struct team_pcpu_stats { u64 rx_packets; @@ -251,98 +250,4 @@ extern void team_mode_unregister(const struct team_mode *mode); #define TEAM_DEFAULT_NUM_TX_QUEUES 16 #define TEAM_DEFAULT_NUM_RX_QUEUES 16 -#endif /* __KERNEL__ */ - -#define TEAM_STRING_MAX_LEN 32 - -/********************************** - * NETLINK_GENERIC netlink family. - **********************************/ - -enum { - TEAM_CMD_NOOP, - TEAM_CMD_OPTIONS_SET, - TEAM_CMD_OPTIONS_GET, - TEAM_CMD_PORT_LIST_GET, - - __TEAM_CMD_MAX, - TEAM_CMD_MAX = (__TEAM_CMD_MAX - 1), -}; - -enum { - TEAM_ATTR_UNSPEC, - TEAM_ATTR_TEAM_IFINDEX, /* u32 */ - TEAM_ATTR_LIST_OPTION, /* nest */ - TEAM_ATTR_LIST_PORT, /* nest */ - - __TEAM_ATTR_MAX, - TEAM_ATTR_MAX = __TEAM_ATTR_MAX - 1, -}; - -/* Nested layout of get/set msg: - * - * [TEAM_ATTR_LIST_OPTION] - * [TEAM_ATTR_ITEM_OPTION] - * [TEAM_ATTR_OPTION_*], ... - * [TEAM_ATTR_ITEM_OPTION] - * [TEAM_ATTR_OPTION_*], ... - * ... - * [TEAM_ATTR_LIST_PORT] - * [TEAM_ATTR_ITEM_PORT] - * [TEAM_ATTR_PORT_*], ... - * [TEAM_ATTR_ITEM_PORT] - * [TEAM_ATTR_PORT_*], ... - * ... - */ - -enum { - TEAM_ATTR_ITEM_OPTION_UNSPEC, - TEAM_ATTR_ITEM_OPTION, /* nest */ - - __TEAM_ATTR_ITEM_OPTION_MAX, - TEAM_ATTR_ITEM_OPTION_MAX = __TEAM_ATTR_ITEM_OPTION_MAX - 1, -}; - -enum { - TEAM_ATTR_OPTION_UNSPEC, - TEAM_ATTR_OPTION_NAME, /* string */ - TEAM_ATTR_OPTION_CHANGED, /* flag */ - TEAM_ATTR_OPTION_TYPE, /* u8 */ - TEAM_ATTR_OPTION_DATA, /* dynamic */ - TEAM_ATTR_OPTION_REMOVED, /* flag */ - TEAM_ATTR_OPTION_PORT_IFINDEX, /* u32 */ /* for per-port options */ - TEAM_ATTR_OPTION_ARRAY_INDEX, /* u32 */ /* for array options */ - - __TEAM_ATTR_OPTION_MAX, - TEAM_ATTR_OPTION_MAX = __TEAM_ATTR_OPTION_MAX - 1, -}; - -enum { - TEAM_ATTR_ITEM_PORT_UNSPEC, - TEAM_ATTR_ITEM_PORT, /* nest */ - - __TEAM_ATTR_ITEM_PORT_MAX, - TEAM_ATTR_ITEM_PORT_MAX = __TEAM_ATTR_ITEM_PORT_MAX - 1, -}; - -enum { - TEAM_ATTR_PORT_UNSPEC, - TEAM_ATTR_PORT_IFINDEX, /* u32 */ - TEAM_ATTR_PORT_CHANGED, /* flag */ - TEAM_ATTR_PORT_LINKUP, /* flag */ - TEAM_ATTR_PORT_SPEED, /* u32 */ - TEAM_ATTR_PORT_DUPLEX, /* u8 */ - TEAM_ATTR_PORT_REMOVED, /* flag */ - - __TEAM_ATTR_PORT_MAX, - TEAM_ATTR_PORT_MAX = __TEAM_ATTR_PORT_MAX - 1, -}; - -/* - * NETLINK_GENERIC related info - */ -#define TEAM_GENL_NAME "team" -#define TEAM_GENL_VERSION 0x1 -#define TEAM_GENL_CHANGE_EVENT_MC_GRP_NAME "change_event" - #endif /* _LINUX_IF_TEAM_H_ */ diff --git a/include/linux/if_tun.h b/include/linux/if_tun.h index 06b1829731f..ed6da2e6df9 100644 --- a/include/linux/if_tun.h +++ b/include/linux/if_tun.h @@ -12,86 +12,11 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ - #ifndef __IF_TUN_H #define __IF_TUN_H -#include <linux/types.h> -#include <linux/if_ether.h> -#include <linux/filter.h> - -/* Read queue size */ -#define TUN_READQ_SIZE 500 - -/* TUN device flags */ -#define TUN_TUN_DEV 0x0001 -#define TUN_TAP_DEV 0x0002 -#define TUN_TYPE_MASK 0x000f - -#define TUN_FASYNC 0x0010 -#define TUN_NOCHECKSUM 0x0020 -#define TUN_NO_PI 0x0040 -#define TUN_ONE_QUEUE 0x0080 -#define TUN_PERSIST 0x0100 -#define TUN_VNET_HDR 0x0200 - -/* Ioctl defines */ -#define TUNSETNOCSUM _IOW('T', 200, int) -#define TUNSETDEBUG _IOW('T', 201, int) -#define TUNSETIFF _IOW('T', 202, int) -#define TUNSETPERSIST _IOW('T', 203, int) -#define TUNSETOWNER _IOW('T', 204, int) -#define TUNSETLINK _IOW('T', 205, int) -#define TUNSETGROUP _IOW('T', 206, int) -#define TUNGETFEATURES _IOR('T', 207, unsigned int) -#define TUNSETOFFLOAD _IOW('T', 208, unsigned int) -#define TUNSETTXFILTER _IOW('T', 209, unsigned int) -#define TUNGETIFF _IOR('T', 210, unsigned int) -#define TUNGETSNDBUF _IOR('T', 211, int) -#define TUNSETSNDBUF _IOW('T', 212, int) -#define TUNATTACHFILTER _IOW('T', 213, struct sock_fprog) -#define TUNDETACHFILTER _IOW('T', 214, struct sock_fprog) -#define TUNGETVNETHDRSZ _IOR('T', 215, int) -#define TUNSETVNETHDRSZ _IOW('T', 216, int) - -/* TUNSETIFF ifr flags */ -#define IFF_TUN 0x0001 -#define IFF_TAP 0x0002 -#define IFF_NO_PI 0x1000 -#define IFF_ONE_QUEUE 0x2000 -#define IFF_VNET_HDR 0x4000 -#define IFF_TUN_EXCL 0x8000 - -/* Features for GSO (TUNSETOFFLOAD). */ -#define TUN_F_CSUM 0x01 /* You can hand me unchecksummed packets. */ -#define TUN_F_TSO4 0x02 /* I can handle TSO for IPv4 packets */ -#define TUN_F_TSO6 0x04 /* I can handle TSO for IPv6 packets */ -#define TUN_F_TSO_ECN 0x08 /* I can handle TSO with ECN bits. */ -#define TUN_F_UFO 0x10 /* I can handle UFO packets */ - -/* Protocol info prepended to the packets (when IFF_NO_PI is not set) */ -#define TUN_PKT_STRIP 0x0001 -struct tun_pi { - __u16 flags; - __be16 proto; -}; - -/* - * Filter spec (used for SETXXFILTER ioctls) - * This stuff is applicable only to the TAP (Ethernet) devices. - * If the count is zero the filter is disabled and the driver accepts - * all packets (promisc mode). - * If the filter is enabled in order to accept broadcast packets - * broadcast addr must be explicitly included in the addr list. - */ -#define TUN_FLT_ALLMULTI 0x0001 /* Accept all multicast packets */ -struct tun_filter { - __u16 flags; /* TUN_FLT_ flags see above */ - __u16 count; /* Number of addresses */ - __u8 addr[0][ETH_ALEN]; -}; +#include <uapi/linux/if_tun.h> -#ifdef __KERNEL__ #if defined(CONFIG_TUN) || defined(CONFIG_TUN_MODULE) struct socket *tun_get_socket(struct file *); #else @@ -104,5 +29,4 @@ static inline struct socket *tun_get_socket(struct file *f) return ERR_PTR(-EINVAL); } #endif /* CONFIG_TUN */ -#endif /* __KERNEL__ */ #endif /* __IF_TUN_H */ diff --git a/include/linux/if_tunnel.h b/include/linux/if_tunnel.h index 8c5035ac314..1cc595a67cc 100644 --- a/include/linux/if_tunnel.h +++ b/include/linux/if_tunnel.h @@ -1,100 +1,8 @@ #ifndef _IF_TUNNEL_H_ #define _IF_TUNNEL_H_ -#include <linux/types.h> -#include <asm/byteorder.h> - -#ifdef __KERNEL__ #include <linux/ip.h> #include <linux/in6.h> -#endif - -#define SIOCGETTUNNEL (SIOCDEVPRIVATE + 0) -#define SIOCADDTUNNEL (SIOCDEVPRIVATE + 1) -#define SIOCDELTUNNEL (SIOCDEVPRIVATE + 2) -#define SIOCCHGTUNNEL (SIOCDEVPRIVATE + 3) -#define SIOCGETPRL (SIOCDEVPRIVATE + 4) -#define SIOCADDPRL (SIOCDEVPRIVATE + 5) -#define SIOCDELPRL (SIOCDEVPRIVATE + 6) -#define SIOCCHGPRL (SIOCDEVPRIVATE + 7) -#define SIOCGET6RD (SIOCDEVPRIVATE + 8) -#define SIOCADD6RD (SIOCDEVPRIVATE + 9) -#define SIOCDEL6RD (SIOCDEVPRIVATE + 10) -#define SIOCCHG6RD (SIOCDEVPRIVATE + 11) - -#define GRE_CSUM __cpu_to_be16(0x8000) -#define GRE_ROUTING __cpu_to_be16(0x4000) -#define GRE_KEY __cpu_to_be16(0x2000) -#define GRE_SEQ __cpu_to_be16(0x1000) -#define GRE_STRICT __cpu_to_be16(0x0800) -#define GRE_REC __cpu_to_be16(0x0700) -#define GRE_FLAGS __cpu_to_be16(0x00F8) -#define GRE_VERSION __cpu_to_be16(0x0007) - -struct ip_tunnel_parm { - char name[IFNAMSIZ]; - int link; - __be16 i_flags; - __be16 o_flags; - __be32 i_key; - __be32 o_key; - struct iphdr iph; -}; - -/* SIT-mode i_flags */ -#define SIT_ISATAP 0x0001 - -struct ip_tunnel_prl { - __be32 addr; - __u16 flags; - __u16 __reserved; - __u32 datalen; - __u32 __reserved2; - /* data follows */ -}; - -/* PRL flags */ -#define PRL_DEFAULT 0x0001 - -struct ip_tunnel_6rd { - struct in6_addr prefix; - __be32 relay_prefix; - __u16 prefixlen; - __u16 relay_prefixlen; -}; - -enum { - IFLA_GRE_UNSPEC, - IFLA_GRE_LINK, - IFLA_GRE_IFLAGS, - IFLA_GRE_OFLAGS, - IFLA_GRE_IKEY, - IFLA_GRE_OKEY, - IFLA_GRE_LOCAL, - IFLA_GRE_REMOTE, - IFLA_GRE_TTL, - IFLA_GRE_TOS, - IFLA_GRE_PMTUDISC, - IFLA_GRE_ENCAP_LIMIT, - IFLA_GRE_FLOWINFO, - IFLA_GRE_FLAGS, - __IFLA_GRE_MAX, -}; - -#define IFLA_GRE_MAX (__IFLA_GRE_MAX - 1) - -/* VTI-mode i_flags */ -#define VTI_ISVTI 0x0001 - -enum { - IFLA_VTI_UNSPEC, - IFLA_VTI_LINK, - IFLA_VTI_IKEY, - IFLA_VTI_OKEY, - IFLA_VTI_LOCAL, - IFLA_VTI_REMOTE, - __IFLA_VTI_MAX, -}; +#include <uapi/linux/if_tunnel.h> -#define IFLA_VTI_MAX (__IFLA_VTI_MAX - 1) #endif /* _IF_TUNNEL_H_ */ diff --git a/include/linux/if_vlan.h b/include/linux/if_vlan.h index c0ff748d0aa..d06cc5c8f58 100644 --- a/include/linux/if_vlan.h +++ b/include/linux/if_vlan.h @@ -9,15 +9,14 @@ * 2 of the License, or (at your option) any later version. * */ - #ifndef _LINUX_IF_VLAN_H_ #define _LINUX_IF_VLAN_H_ -#ifdef __KERNEL__ #include <linux/netdevice.h> #include <linux/etherdevice.h> #include <linux/rtnetlink.h> #include <linux/bug.h> +#include <uapi/linux/if_vlan.h> #define VLAN_HLEN 4 /* The additional bytes required by VLAN * (in addition to the Ethernet header) @@ -361,52 +360,4 @@ static inline void vlan_set_encap_proto(struct sk_buff *skb, */ skb->protocol = htons(ETH_P_802_2); } -#endif /* __KERNEL__ */ - -/* VLAN IOCTLs are found in sockios.h */ - -/* Passed in vlan_ioctl_args structure to determine behaviour. */ -enum vlan_ioctl_cmds { - ADD_VLAN_CMD, - DEL_VLAN_CMD, - SET_VLAN_INGRESS_PRIORITY_CMD, - SET_VLAN_EGRESS_PRIORITY_CMD, - GET_VLAN_INGRESS_PRIORITY_CMD, - GET_VLAN_EGRESS_PRIORITY_CMD, - SET_VLAN_NAME_TYPE_CMD, - SET_VLAN_FLAG_CMD, - GET_VLAN_REALDEV_NAME_CMD, /* If this works, you know it's a VLAN device, btw */ - GET_VLAN_VID_CMD /* Get the VID of this VLAN (specified by name) */ -}; - -enum vlan_flags { - VLAN_FLAG_REORDER_HDR = 0x1, - VLAN_FLAG_GVRP = 0x2, - VLAN_FLAG_LOOSE_BINDING = 0x4, -}; - -enum vlan_name_types { - VLAN_NAME_TYPE_PLUS_VID, /* Name will look like: vlan0005 */ - VLAN_NAME_TYPE_RAW_PLUS_VID, /* name will look like: eth1.0005 */ - VLAN_NAME_TYPE_PLUS_VID_NO_PAD, /* Name will look like: vlan5 */ - VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD, /* Name will look like: eth0.5 */ - VLAN_NAME_TYPE_HIGHEST -}; - -struct vlan_ioctl_args { - int cmd; /* Should be one of the vlan_ioctl_cmds enum above. */ - char device1[24]; - - union { - char device2[24]; - int VID; - unsigned int skb_priority; - unsigned int name_type; - unsigned int bind_type; - unsigned int flag; /* Matches vlan_dev_priv flags */ - } u; - - short vlan_qos; -}; - #endif /* !(_LINUX_IF_VLAN_H_) */ diff --git a/include/linux/igmp.h b/include/linux/igmp.h index 82de336b815..7f2bf151848 100644 --- a/include/linux/igmp.h +++ b/include/linux/igmp.h @@ -12,123 +12,13 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ - #ifndef _LINUX_IGMP_H #define _LINUX_IGMP_H -#include <linux/types.h> -#include <asm/byteorder.h> - -/* - * IGMP protocol structures - */ - -/* - * Header in on cable format - */ - -struct igmphdr { - __u8 type; - __u8 code; /* For newer IGMP */ - __sum16 csum; - __be32 group; -}; - -/* V3 group record types [grec_type] */ -#define IGMPV3_MODE_IS_INCLUDE 1 -#define IGMPV3_MODE_IS_EXCLUDE 2 -#define IGMPV3_CHANGE_TO_INCLUDE 3 -#define IGMPV3_CHANGE_TO_EXCLUDE 4 -#define IGMPV3_ALLOW_NEW_SOURCES 5 -#define IGMPV3_BLOCK_OLD_SOURCES 6 - -struct igmpv3_grec { - __u8 grec_type; - __u8 grec_auxwords; - __be16 grec_nsrcs; - __be32 grec_mca; - __be32 grec_src[0]; -}; - -struct igmpv3_report { - __u8 type; - __u8 resv1; - __be16 csum; - __be16 resv2; - __be16 ngrec; - struct igmpv3_grec grec[0]; -}; - -struct igmpv3_query { - __u8 type; - __u8 code; - __be16 csum; - __be32 group; -#if defined(__LITTLE_ENDIAN_BITFIELD) - __u8 qrv:3, - suppress:1, - resv:4; -#elif defined(__BIG_ENDIAN_BITFIELD) - __u8 resv:4, - suppress:1, - qrv:3; -#else -#error "Please fix <asm/byteorder.h>" -#endif - __u8 qqic; - __be16 nsrcs; - __be32 srcs[0]; -}; - -#define IGMP_HOST_MEMBERSHIP_QUERY 0x11 /* From RFC1112 */ -#define IGMP_HOST_MEMBERSHIP_REPORT 0x12 /* Ditto */ -#define IGMP_DVMRP 0x13 /* DVMRP routing */ -#define IGMP_PIM 0x14 /* PIM routing */ -#define IGMP_TRACE 0x15 -#define IGMPV2_HOST_MEMBERSHIP_REPORT 0x16 /* V2 version of 0x12 */ -#define IGMP_HOST_LEAVE_MESSAGE 0x17 -#define IGMPV3_HOST_MEMBERSHIP_REPORT 0x22 /* V3 version of 0x12 */ - -#define IGMP_MTRACE_RESP 0x1e -#define IGMP_MTRACE 0x1f - - -/* - * Use the BSD names for these for compatibility - */ - -#define IGMP_DELAYING_MEMBER 0x01 -#define IGMP_IDLE_MEMBER 0x02 -#define IGMP_LAZY_MEMBER 0x03 -#define IGMP_SLEEPING_MEMBER 0x04 -#define IGMP_AWAKENING_MEMBER 0x05 - -#define IGMP_MINLEN 8 - -#define IGMP_MAX_HOST_REPORT_DELAY 10 /* max delay for response to */ - /* query (in seconds) */ - -#define IGMP_TIMER_SCALE 10 /* denotes that the igmphdr->timer field */ - /* specifies time in 10th of seconds */ - -#define IGMP_AGE_THRESHOLD 400 /* If this host don't hear any IGMP V1 */ - /* message in this period of time, */ - /* revert to IGMP v2 router. */ - -#define IGMP_ALL_HOSTS htonl(0xE0000001L) -#define IGMP_ALL_ROUTER htonl(0xE0000002L) -#define IGMPV3_ALL_MCR htonl(0xE0000016L) -#define IGMP_LOCAL_GROUP htonl(0xE0000000L) -#define IGMP_LOCAL_GROUP_MASK htonl(0xFFFFFF00L) - -/* - * struct for keeping the multicast list in - */ - -#ifdef __KERNEL__ #include <linux/skbuff.h> #include <linux/timer.h> #include <linux/in.h> +#include <uapi/linux/igmp.h> static inline struct igmphdr *igmp_hdr(const struct sk_buff *skb) { @@ -241,4 +131,3 @@ extern void ip_mc_inc_group(struct in_device *in_dev, __be32 addr); extern void ip_mc_rejoin_groups(struct in_device *in_dev); #endif -#endif diff --git a/include/linux/in.h b/include/linux/in.h index e0337f11d92..31b49373476 100644 --- a/include/linux/in.h +++ b/include/linux/in.h @@ -18,240 +18,9 @@ #ifndef _LINUX_IN_H #define _LINUX_IN_H -#include <linux/types.h> -#include <linux/socket.h> - -/* Standard well-defined IP protocols. */ -enum { - IPPROTO_IP = 0, /* Dummy protocol for TCP */ - IPPROTO_ICMP = 1, /* Internet Control Message Protocol */ - IPPROTO_IGMP = 2, /* Internet Group Management Protocol */ - IPPROTO_IPIP = 4, /* IPIP tunnels (older KA9Q tunnels use 94) */ - IPPROTO_TCP = 6, /* Transmission Control Protocol */ - IPPROTO_EGP = 8, /* Exterior Gateway Protocol */ - IPPROTO_PUP = 12, /* PUP protocol */ - IPPROTO_UDP = 17, /* User Datagram Protocol */ - IPPROTO_IDP = 22, /* XNS IDP protocol */ - IPPROTO_DCCP = 33, /* Datagram Congestion Control Protocol */ - IPPROTO_RSVP = 46, /* RSVP protocol */ - IPPROTO_GRE = 47, /* Cisco GRE tunnels (rfc 1701,1702) */ - - IPPROTO_IPV6 = 41, /* IPv6-in-IPv4 tunnelling */ - - IPPROTO_ESP = 50, /* Encapsulation Security Payload protocol */ - IPPROTO_AH = 51, /* Authentication Header protocol */ - IPPROTO_BEETPH = 94, /* IP option pseudo header for BEET */ - IPPROTO_PIM = 103, /* Protocol Independent Multicast */ - - IPPROTO_COMP = 108, /* Compression Header protocol */ - IPPROTO_SCTP = 132, /* Stream Control Transport Protocol */ - IPPROTO_UDPLITE = 136, /* UDP-Lite (RFC 3828) */ - - IPPROTO_RAW = 255, /* Raw IP packets */ - IPPROTO_MAX -}; - - -/* Internet address. */ -struct in_addr { - __be32 s_addr; -}; - -#define IP_TOS 1 -#define IP_TTL 2 -#define IP_HDRINCL 3 -#define IP_OPTIONS 4 -#define IP_ROUTER_ALERT 5 -#define IP_RECVOPTS 6 -#define IP_RETOPTS 7 -#define IP_PKTINFO 8 -#define IP_PKTOPTIONS 9 -#define IP_MTU_DISCOVER 10 -#define IP_RECVERR 11 -#define IP_RECVTTL 12 -#define IP_RECVTOS 13 -#define IP_MTU 14 -#define IP_FREEBIND 15 -#define IP_IPSEC_POLICY 16 -#define IP_XFRM_POLICY 17 -#define IP_PASSSEC 18 -#define IP_TRANSPARENT 19 - -/* BSD compatibility */ -#define IP_RECVRETOPTS IP_RETOPTS - -/* TProxy original addresses */ -#define IP_ORIGDSTADDR 20 -#define IP_RECVORIGDSTADDR IP_ORIGDSTADDR - -#define IP_MINTTL 21 -#define IP_NODEFRAG 22 - -/* IP_MTU_DISCOVER values */ -#define IP_PMTUDISC_DONT 0 /* Never send DF frames */ -#define IP_PMTUDISC_WANT 1 /* Use per route hints */ -#define IP_PMTUDISC_DO 2 /* Always DF */ -#define IP_PMTUDISC_PROBE 3 /* Ignore dst pmtu */ - -#define IP_MULTICAST_IF 32 -#define IP_MULTICAST_TTL 33 -#define IP_MULTICAST_LOOP 34 -#define IP_ADD_MEMBERSHIP 35 -#define IP_DROP_MEMBERSHIP 36 -#define IP_UNBLOCK_SOURCE 37 -#define IP_BLOCK_SOURCE 38 -#define IP_ADD_SOURCE_MEMBERSHIP 39 -#define IP_DROP_SOURCE_MEMBERSHIP 40 -#define IP_MSFILTER 41 -#define MCAST_JOIN_GROUP 42 -#define MCAST_BLOCK_SOURCE 43 -#define MCAST_UNBLOCK_SOURCE 44 -#define MCAST_LEAVE_GROUP 45 -#define MCAST_JOIN_SOURCE_GROUP 46 -#define MCAST_LEAVE_SOURCE_GROUP 47 -#define MCAST_MSFILTER 48 -#define IP_MULTICAST_ALL 49 -#define IP_UNICAST_IF 50 - -#define MCAST_EXCLUDE 0 -#define MCAST_INCLUDE 1 - -/* These need to appear somewhere around here */ -#define IP_DEFAULT_MULTICAST_TTL 1 -#define IP_DEFAULT_MULTICAST_LOOP 1 - -/* Request struct for multicast socket ops */ - -struct ip_mreq { - struct in_addr imr_multiaddr; /* IP multicast address of group */ - struct in_addr imr_interface; /* local IP address of interface */ -}; - -struct ip_mreqn { - struct in_addr imr_multiaddr; /* IP multicast address of group */ - struct in_addr imr_address; /* local IP address of interface */ - int imr_ifindex; /* Interface index */ -}; - -struct ip_mreq_source { - __be32 imr_multiaddr; - __be32 imr_interface; - __be32 imr_sourceaddr; -}; - -struct ip_msfilter { - __be32 imsf_multiaddr; - __be32 imsf_interface; - __u32 imsf_fmode; - __u32 imsf_numsrc; - __be32 imsf_slist[1]; -}; - -#define IP_MSFILTER_SIZE(numsrc) \ - (sizeof(struct ip_msfilter) - sizeof(__u32) \ - + (numsrc) * sizeof(__u32)) - -struct group_req { - __u32 gr_interface; /* interface index */ - struct __kernel_sockaddr_storage gr_group; /* group address */ -}; - -struct group_source_req { - __u32 gsr_interface; /* interface index */ - struct __kernel_sockaddr_storage gsr_group; /* group address */ - struct __kernel_sockaddr_storage gsr_source; /* source address */ -}; - -struct group_filter { - __u32 gf_interface; /* interface index */ - struct __kernel_sockaddr_storage gf_group; /* multicast address */ - __u32 gf_fmode; /* filter mode */ - __u32 gf_numsrc; /* number of sources */ - struct __kernel_sockaddr_storage gf_slist[1]; /* interface index */ -}; - -#define GROUP_FILTER_SIZE(numsrc) \ - (sizeof(struct group_filter) - sizeof(struct __kernel_sockaddr_storage) \ - + (numsrc) * sizeof(struct __kernel_sockaddr_storage)) - -struct in_pktinfo { - int ipi_ifindex; - struct in_addr ipi_spec_dst; - struct in_addr ipi_addr; -}; - -/* Structure describing an Internet (IP) socket address. */ -#define __SOCK_SIZE__ 16 /* sizeof(struct sockaddr) */ -struct sockaddr_in { - __kernel_sa_family_t sin_family; /* Address family */ - __be16 sin_port; /* Port number */ - struct in_addr sin_addr; /* Internet address */ - - /* Pad to size of `struct sockaddr'. */ - unsigned char __pad[__SOCK_SIZE__ - sizeof(short int) - - sizeof(unsigned short int) - sizeof(struct in_addr)]; -}; -#define sin_zero __pad /* for BSD UNIX comp. -FvK */ - - -/* - * Definitions of the bits in an Internet address integer. - * On subnets, host and network parts are found according - * to the subnet mask, not these masks. - */ -#define IN_CLASSA(a) ((((long int) (a)) & 0x80000000) == 0) -#define IN_CLASSA_NET 0xff000000 -#define IN_CLASSA_NSHIFT 24 -#define IN_CLASSA_HOST (0xffffffff & ~IN_CLASSA_NET) -#define IN_CLASSA_MAX 128 - -#define IN_CLASSB(a) ((((long int) (a)) & 0xc0000000) == 0x80000000) -#define IN_CLASSB_NET 0xffff0000 -#define IN_CLASSB_NSHIFT 16 -#define IN_CLASSB_HOST (0xffffffff & ~IN_CLASSB_NET) -#define IN_CLASSB_MAX 65536 - -#define IN_CLASSC(a) ((((long int) (a)) & 0xe0000000) == 0xc0000000) -#define IN_CLASSC_NET 0xffffff00 -#define IN_CLASSC_NSHIFT 8 -#define IN_CLASSC_HOST (0xffffffff & ~IN_CLASSC_NET) - -#define IN_CLASSD(a) ((((long int) (a)) & 0xf0000000) == 0xe0000000) -#define IN_MULTICAST(a) IN_CLASSD(a) -#define IN_MULTICAST_NET 0xF0000000 - -#define IN_EXPERIMENTAL(a) ((((long int) (a)) & 0xf0000000) == 0xf0000000) -#define IN_BADCLASS(a) IN_EXPERIMENTAL((a)) - -/* Address to accept any incoming messages. */ -#define INADDR_ANY ((unsigned long int) 0x00000000) - -/* Address to send to all hosts. */ -#define INADDR_BROADCAST ((unsigned long int) 0xffffffff) - -/* Address indicating an error return. */ -#define INADDR_NONE ((unsigned long int) 0xffffffff) - -/* Network number for local host loopback. */ -#define IN_LOOPBACKNET 127 - -/* Address to loopback in software to local host. */ -#define INADDR_LOOPBACK 0x7f000001 /* 127.0.0.1 */ -#define IN_LOOPBACK(a) ((((long int) (a)) & 0xff000000) == 0x7f000000) - -/* Defines for Multicast INADDR */ -#define INADDR_UNSPEC_GROUP 0xe0000000U /* 224.0.0.0 */ -#define INADDR_ALLHOSTS_GROUP 0xe0000001U /* 224.0.0.1 */ -#define INADDR_ALLRTRS_GROUP 0xe0000002U /* 224.0.0.2 */ -#define INADDR_MAX_LOCAL_GROUP 0xe00000ffU /* 224.0.0.255 */ - - -/* <asm/byteorder.h> contains the htonl type stuff.. */ -#include <asm/byteorder.h> - -#ifdef __KERNEL__ #include <linux/errno.h> +#include <uapi/linux/in.h> static inline int proto_ports_offset(int proto) { @@ -332,6 +101,4 @@ static inline bool ipv4_is_test_198(__be32 addr) { return (addr & htonl(0xfffe0000)) == htonl(0xc6120000); } -#endif - #endif /* _LINUX_IN_H */ diff --git a/include/linux/in6.h b/include/linux/in6.h index cba469ba11a..9e2ae26fb59 100644 --- a/include/linux/in6.h +++ b/include/linux/in6.h @@ -17,32 +17,11 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ - #ifndef _LINUX_IN6_H #define _LINUX_IN6_H -#include <linux/types.h> - -/* - * IPv6 address structure - */ - -struct in6_addr { - union { - __u8 u6_addr8[16]; - __be16 u6_addr16[8]; - __be32 u6_addr32[4]; - } in6_u; -#define s6_addr in6_u.u6_addr8 -#define s6_addr16 in6_u.u6_addr16 -#define s6_addr32 in6_u.u6_addr32 -}; +#include <uapi/linux/in6.h> -/* IPv6 Wildcard Address (::) and Loopback Address (::1) defined in RFC2553 - * NOTE: Be aware the IN6ADDR_* constants and in6addr_* externals are defined - * in network byte order, not in host byte order as are the IPv4 equivalents - */ -#ifdef __KERNEL__ extern const struct in6_addr in6addr_any; #define IN6ADDR_ANY_INIT { { { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 } } } extern const struct in6_addr in6addr_loopback; @@ -54,238 +33,3 @@ extern const struct in6_addr in6addr_linklocal_allrouters; #define IN6ADDR_LINKLOCAL_ALLROUTERS_INIT \ { { { 0xff,2,0,0,0,0,0,0,0,0,0,0,0,0,0,2 } } } #endif - -struct sockaddr_in6 { - unsigned short int sin6_family; /* AF_INET6 */ - __be16 sin6_port; /* Transport layer port # */ - __be32 sin6_flowinfo; /* IPv6 flow information */ - struct in6_addr sin6_addr; /* IPv6 address */ - __u32 sin6_scope_id; /* scope id (new in RFC2553) */ -}; - -struct ipv6_mreq { - /* IPv6 multicast address of group */ - struct in6_addr ipv6mr_multiaddr; - - /* local IPv6 address of interface */ - int ipv6mr_ifindex; -}; - -#define ipv6mr_acaddr ipv6mr_multiaddr - -struct in6_flowlabel_req { - struct in6_addr flr_dst; - __be32 flr_label; - __u8 flr_action; - __u8 flr_share; - __u16 flr_flags; - __u16 flr_expires; - __u16 flr_linger; - __u32 __flr_pad; - /* Options in format of IPV6_PKTOPTIONS */ -}; - -#define IPV6_FL_A_GET 0 -#define IPV6_FL_A_PUT 1 -#define IPV6_FL_A_RENEW 2 - -#define IPV6_FL_F_CREATE 1 -#define IPV6_FL_F_EXCL 2 - -#define IPV6_FL_S_NONE 0 -#define IPV6_FL_S_EXCL 1 -#define IPV6_FL_S_PROCESS 2 -#define IPV6_FL_S_USER 3 -#define IPV6_FL_S_ANY 255 - - -/* - * Bitmask constant declarations to help applications select out the - * flow label and priority fields. - * - * Note that this are in host byte order while the flowinfo field of - * sockaddr_in6 is in network byte order. - */ - -#define IPV6_FLOWINFO_FLOWLABEL 0x000fffff -#define IPV6_FLOWINFO_PRIORITY 0x0ff00000 - -/* These definitions are obsolete */ -#define IPV6_PRIORITY_UNCHARACTERIZED 0x0000 -#define IPV6_PRIORITY_FILLER 0x0100 -#define IPV6_PRIORITY_UNATTENDED 0x0200 -#define IPV6_PRIORITY_RESERVED1 0x0300 -#define IPV6_PRIORITY_BULK 0x0400 -#define IPV6_PRIORITY_RESERVED2 0x0500 -#define IPV6_PRIORITY_INTERACTIVE 0x0600 -#define IPV6_PRIORITY_CONTROL 0x0700 -#define IPV6_PRIORITY_8 0x0800 -#define IPV6_PRIORITY_9 0x0900 -#define IPV6_PRIORITY_10 0x0a00 -#define IPV6_PRIORITY_11 0x0b00 -#define IPV6_PRIORITY_12 0x0c00 -#define IPV6_PRIORITY_13 0x0d00 -#define IPV6_PRIORITY_14 0x0e00 -#define IPV6_PRIORITY_15 0x0f00 - -/* - * IPV6 extension headers - */ -#define IPPROTO_HOPOPTS 0 /* IPv6 hop-by-hop options */ -#define IPPROTO_ROUTING 43 /* IPv6 routing header */ -#define IPPROTO_FRAGMENT 44 /* IPv6 fragmentation header */ -#define IPPROTO_ICMPV6 58 /* ICMPv6 */ -#define IPPROTO_NONE 59 /* IPv6 no next header */ -#define IPPROTO_DSTOPTS 60 /* IPv6 destination options */ -#define IPPROTO_MH 135 /* IPv6 mobility header */ - -/* - * IPv6 TLV options. - */ -#define IPV6_TLV_PAD1 0 -#define IPV6_TLV_PADN 1 -#define IPV6_TLV_ROUTERALERT 5 -#define IPV6_TLV_JUMBO 194 -#define IPV6_TLV_HAO 201 /* home address option */ - -/* - * IPV6 socket options - */ - -#define IPV6_ADDRFORM 1 -#define IPV6_2292PKTINFO 2 -#define IPV6_2292HOPOPTS 3 -#define IPV6_2292DSTOPTS 4 -#define IPV6_2292RTHDR 5 -#define IPV6_2292PKTOPTIONS 6 -#define IPV6_CHECKSUM 7 -#define IPV6_2292HOPLIMIT 8 -#define IPV6_NEXTHOP 9 -#define IPV6_AUTHHDR 10 /* obsolete */ -#define IPV6_FLOWINFO 11 - -#define IPV6_UNICAST_HOPS 16 -#define IPV6_MULTICAST_IF 17 -#define IPV6_MULTICAST_HOPS 18 -#define IPV6_MULTICAST_LOOP 19 -#define IPV6_ADD_MEMBERSHIP 20 -#define IPV6_DROP_MEMBERSHIP 21 -#define IPV6_ROUTER_ALERT 22 -#define IPV6_MTU_DISCOVER 23 -#define IPV6_MTU 24 -#define IPV6_RECVERR 25 -#define IPV6_V6ONLY 26 -#define IPV6_JOIN_ANYCAST 27 -#define IPV6_LEAVE_ANYCAST 28 - -/* IPV6_MTU_DISCOVER values */ -#define IPV6_PMTUDISC_DONT 0 -#define IPV6_PMTUDISC_WANT 1 -#define IPV6_PMTUDISC_DO 2 -#define IPV6_PMTUDISC_PROBE 3 - -/* Flowlabel */ -#define IPV6_FLOWLABEL_MGR 32 -#define IPV6_FLOWINFO_SEND 33 - -#define IPV6_IPSEC_POLICY 34 -#define IPV6_XFRM_POLICY 35 - -/* - * Multicast: - * Following socket options are shared between IPv4 and IPv6. - * - * MCAST_JOIN_GROUP 42 - * MCAST_BLOCK_SOURCE 43 - * MCAST_UNBLOCK_SOURCE 44 - * MCAST_LEAVE_GROUP 45 - * MCAST_JOIN_SOURCE_GROUP 46 - * MCAST_LEAVE_SOURCE_GROUP 47 - * MCAST_MSFILTER 48 - */ - -/* - * Advanced API (RFC3542) (1) - * - * Note: IPV6_RECVRTHDRDSTOPTS does not exist. see net/ipv6/datagram.c. - */ - -#define IPV6_RECVPKTINFO 49 -#define IPV6_PKTINFO 50 -#define IPV6_RECVHOPLIMIT 51 -#define IPV6_HOPLIMIT 52 -#define IPV6_RECVHOPOPTS 53 -#define IPV6_HOPOPTS 54 -#define IPV6_RTHDRDSTOPTS 55 -#define IPV6_RECVRTHDR 56 -#define IPV6_RTHDR 57 -#define IPV6_RECVDSTOPTS 58 -#define IPV6_DSTOPTS 59 -#define IPV6_RECVPATHMTU 60 -#define IPV6_PATHMTU 61 -#define IPV6_DONTFRAG 62 -#if 0 /* not yet */ -#define IPV6_USE_MIN_MTU 63 -#endif - -/* - * Netfilter (1) - * - * Following socket options are used in ip6_tables; - * see include/linux/netfilter_ipv6/ip6_tables.h. - * - * IP6T_SO_SET_REPLACE / IP6T_SO_GET_INFO 64 - * IP6T_SO_SET_ADD_COUNTERS / IP6T_SO_GET_ENTRIES 65 - */ - -/* - * Advanced API (RFC3542) (2) - */ -#define IPV6_RECVTCLASS 66 -#define IPV6_TCLASS 67 - -/* - * Netfilter (2) - * - * Following socket options are used in ip6_tables; - * see include/linux/netfilter_ipv6/ip6_tables.h. - * - * IP6T_SO_GET_REVISION_MATCH 68 - * IP6T_SO_GET_REVISION_TARGET 69 - */ - -/* RFC5014: Source address selection */ -#define IPV6_ADDR_PREFERENCES 72 - -#define IPV6_PREFER_SRC_TMP 0x0001 -#define IPV6_PREFER_SRC_PUBLIC 0x0002 -#define IPV6_PREFER_SRC_PUBTMP_DEFAULT 0x0100 -#define IPV6_PREFER_SRC_COA 0x0004 -#define IPV6_PREFER_SRC_HOME 0x0400 -#define IPV6_PREFER_SRC_CGA 0x0008 -#define IPV6_PREFER_SRC_NONCGA 0x0800 - -/* RFC5082: Generalized Ttl Security Mechanism */ -#define IPV6_MINHOPCOUNT 73 - -#define IPV6_ORIGDSTADDR 74 -#define IPV6_RECVORIGDSTADDR IPV6_ORIGDSTADDR -#define IPV6_TRANSPARENT 75 -#define IPV6_UNICAST_IF 76 - -/* - * Multicast Routing: - * see include/linux/mroute6.h. - * - * MRT6_INIT 200 - * MRT6_DONE 201 - * MRT6_ADD_MIF 202 - * MRT6_DEL_MIF 203 - * MRT6_ADD_MFC 204 - * MRT6_DEL_MFC 205 - * MRT6_VERSION 206 - * MRT6_ASSERT 207 - * MRT6_PIM 208 - * (reserved) 209 - */ -#endif diff --git a/include/linux/inet_diag.h b/include/linux/inet_diag.h index e788c186ed3..46da02410a0 100644 --- a/include/linux/inet_diag.h +++ b/include/linux/inet_diag.h @@ -1,138 +1,8 @@ #ifndef _INET_DIAG_H_ #define _INET_DIAG_H_ 1 -#include <linux/types.h> +#include <uapi/linux/inet_diag.h> -/* Just some random number */ -#define TCPDIAG_GETSOCK 18 -#define DCCPDIAG_GETSOCK 19 - -#define INET_DIAG_GETSOCK_MAX 24 - -/* Socket identity */ -struct inet_diag_sockid { - __be16 idiag_sport; - __be16 idiag_dport; - __be32 idiag_src[4]; - __be32 idiag_dst[4]; - __u32 idiag_if; - __u32 idiag_cookie[2]; -#define INET_DIAG_NOCOOKIE (~0U) -}; - -/* Request structure */ - -struct inet_diag_req { - __u8 idiag_family; /* Family of addresses. */ - __u8 idiag_src_len; - __u8 idiag_dst_len; - __u8 idiag_ext; /* Query extended information */ - - struct inet_diag_sockid id; - - __u32 idiag_states; /* States to dump */ - __u32 idiag_dbs; /* Tables to dump (NI) */ -}; - -struct inet_diag_req_v2 { - __u8 sdiag_family; - __u8 sdiag_protocol; - __u8 idiag_ext; - __u8 pad; - __u32 idiag_states; - struct inet_diag_sockid id; -}; - -enum { - INET_DIAG_REQ_NONE, - INET_DIAG_REQ_BYTECODE, -}; - -#define INET_DIAG_REQ_MAX INET_DIAG_REQ_BYTECODE - -/* Bytecode is sequence of 4 byte commands followed by variable arguments. - * All the commands identified by "code" are conditional jumps forward: - * to offset cc+"yes" or to offset cc+"no". "yes" is supposed to be - * length of the command and its arguments. - */ - -struct inet_diag_bc_op { - unsigned char code; - unsigned char yes; - unsigned short no; -}; - -enum { - INET_DIAG_BC_NOP, - INET_DIAG_BC_JMP, - INET_DIAG_BC_S_GE, - INET_DIAG_BC_S_LE, - INET_DIAG_BC_D_GE, - INET_DIAG_BC_D_LE, - INET_DIAG_BC_AUTO, - INET_DIAG_BC_S_COND, - INET_DIAG_BC_D_COND, -}; - -struct inet_diag_hostcond { - __u8 family; - __u8 prefix_len; - int port; - __be32 addr[0]; -}; - -/* Base info structure. It contains socket identity (addrs/ports/cookie) - * and, alas, the information shown by netstat. */ -struct inet_diag_msg { - __u8 idiag_family; - __u8 idiag_state; - __u8 idiag_timer; - __u8 idiag_retrans; - - struct inet_diag_sockid id; - - __u32 idiag_expires; - __u32 idiag_rqueue; - __u32 idiag_wqueue; - __u32 idiag_uid; - __u32 idiag_inode; -}; - -/* Extensions */ - -enum { - INET_DIAG_NONE, - INET_DIAG_MEMINFO, - INET_DIAG_INFO, - INET_DIAG_VEGASINFO, - INET_DIAG_CONG, - INET_DIAG_TOS, - INET_DIAG_TCLASS, - INET_DIAG_SKMEMINFO, -}; - -#define INET_DIAG_MAX INET_DIAG_SKMEMINFO - - -/* INET_DIAG_MEM */ - -struct inet_diag_meminfo { - __u32 idiag_rmem; - __u32 idiag_wmem; - __u32 idiag_fmem; - __u32 idiag_tmem; -}; - -/* INET_DIAG_VEGASINFO */ - -struct tcpvegas_info { - __u32 tcpv_enabled; - __u32 tcpv_rttcnt; - __u32 tcpv_rtt; - __u32 tcpv_minrtt; -}; - -#ifdef __KERNEL__ struct sock; struct inet_hashinfo; struct nlattr; @@ -173,6 +43,4 @@ int inet_diag_bc_sk(const struct nlattr *_bc, struct sock *sk); extern int inet_diag_register(const struct inet_diag_handler *handler); extern void inet_diag_unregister(const struct inet_diag_handler *handler); -#endif /* __KERNEL__ */ - #endif /* _INET_DIAG_H_ */ diff --git a/include/linux/inotify.h b/include/linux/inotify.h index d33041e2a42..23aede0b584 100644 --- a/include/linux/inotify.h +++ b/include/linux/inotify.h @@ -3,75 +3,12 @@ * * Copyright (C) 2005 John McCutchan */ - #ifndef _LINUX_INOTIFY_H #define _LINUX_INOTIFY_H -/* For O_CLOEXEC and O_NONBLOCK */ -#include <linux/fcntl.h> -#include <linux/types.h> - -/* - * struct inotify_event - structure read from the inotify device for each event - * - * When you are watching a directory, you will receive the filename for events - * such as IN_CREATE, IN_DELETE, IN_OPEN, IN_CLOSE, ..., relative to the wd. - */ -struct inotify_event { - __s32 wd; /* watch descriptor */ - __u32 mask; /* watch mask */ - __u32 cookie; /* cookie to synchronize two events */ - __u32 len; /* length (including nulls) of name */ - char name[0]; /* stub for possible name */ -}; - -/* the following are legal, implemented events that user-space can watch for */ -#define IN_ACCESS 0x00000001 /* File was accessed */ -#define IN_MODIFY 0x00000002 /* File was modified */ -#define IN_ATTRIB 0x00000004 /* Metadata changed */ -#define IN_CLOSE_WRITE 0x00000008 /* Writtable file was closed */ -#define IN_CLOSE_NOWRITE 0x00000010 /* Unwrittable file closed */ -#define IN_OPEN 0x00000020 /* File was opened */ -#define IN_MOVED_FROM 0x00000040 /* File was moved from X */ -#define IN_MOVED_TO 0x00000080 /* File was moved to Y */ -#define IN_CREATE 0x00000100 /* Subfile was created */ -#define IN_DELETE 0x00000200 /* Subfile was deleted */ -#define IN_DELETE_SELF 0x00000400 /* Self was deleted */ -#define IN_MOVE_SELF 0x00000800 /* Self was moved */ - -/* the following are legal events. they are sent as needed to any watch */ -#define IN_UNMOUNT 0x00002000 /* Backing fs was unmounted */ -#define IN_Q_OVERFLOW 0x00004000 /* Event queued overflowed */ -#define IN_IGNORED 0x00008000 /* File was ignored */ - -/* helper events */ -#define IN_CLOSE (IN_CLOSE_WRITE | IN_CLOSE_NOWRITE) /* close */ -#define IN_MOVE (IN_MOVED_FROM | IN_MOVED_TO) /* moves */ - -/* special flags */ -#define IN_ONLYDIR 0x01000000 /* only watch the path if it is a directory */ -#define IN_DONT_FOLLOW 0x02000000 /* don't follow a sym link */ -#define IN_EXCL_UNLINK 0x04000000 /* exclude events on unlinked objects */ -#define IN_MASK_ADD 0x20000000 /* add to the mask of an already existing watch */ -#define IN_ISDIR 0x40000000 /* event occurred against dir */ -#define IN_ONESHOT 0x80000000 /* only send event once */ - -/* - * All of the events - we build the list by hand so that we can add flags in - * the future and not break backward compatibility. Apps will get only the - * events that they originally wanted. Be sure to add new events here! - */ -#define IN_ALL_EVENTS (IN_ACCESS | IN_MODIFY | IN_ATTRIB | IN_CLOSE_WRITE | \ - IN_CLOSE_NOWRITE | IN_OPEN | IN_MOVED_FROM | \ - IN_MOVED_TO | IN_DELETE | IN_CREATE | IN_DELETE_SELF | \ - IN_MOVE_SELF) - -/* Flags for sys_inotify_init1. */ -#define IN_CLOEXEC O_CLOEXEC -#define IN_NONBLOCK O_NONBLOCK - -#ifdef __KERNEL__ #include <linux/sysctl.h> +#include <uapi/linux/inotify.h> + extern struct ctl_table inotify_table[]; /* for sysctl */ #define ALL_INOTIFY_BITS (IN_ACCESS | IN_MODIFY | IN_ATTRIB | IN_CLOSE_WRITE | \ @@ -82,6 +19,4 @@ extern struct ctl_table inotify_table[]; /* for sysctl */ IN_DONT_FOLLOW | IN_EXCL_UNLINK | IN_MASK_ADD | \ IN_ISDIR | IN_ONESHOT) -#endif - #endif /* _LINUX_INOTIFY_H */ diff --git a/include/linux/input.h b/include/linux/input.h index ba487430293..cab994ba6d9 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -1,6 +1,3 @@ -#ifndef _INPUT_H -#define _INPUT_H - /* * Copyright (c) 1999-2002 Vojtech Pavlik * @@ -8,1156 +5,15 @@ * under the terms of the GNU General Public License version 2 as published by * the Free Software Foundation. */ +#ifndef _INPUT_H +#define _INPUT_H -#ifdef __KERNEL__ #include <linux/time.h> #include <linux/list.h> -#else -#include <sys/time.h> -#include <sys/ioctl.h> -#include <sys/types.h> -#include <linux/types.h> -#endif - -/* - * The event structure itself - */ - -struct input_event { - struct timeval time; - __u16 type; - __u16 code; - __s32 value; -}; - -/* - * Protocol version. - */ - -#define EV_VERSION 0x010001 - -/* - * IOCTLs (0x00 - 0x7f) - */ - -struct input_id { - __u16 bustype; - __u16 vendor; - __u16 product; - __u16 version; -}; - -/** - * struct input_absinfo - used by EVIOCGABS/EVIOCSABS ioctls - * @value: latest reported value for the axis. - * @minimum: specifies minimum value for the axis. - * @maximum: specifies maximum value for the axis. - * @fuzz: specifies fuzz value that is used to filter noise from - * the event stream. - * @flat: values that are within this value will be discarded by - * joydev interface and reported as 0 instead. - * @resolution: specifies resolution for the values reported for - * the axis. - * - * Note that input core does not clamp reported values to the - * [minimum, maximum] limits, such task is left to userspace. - * - * Resolution for main axes (ABS_X, ABS_Y, ABS_Z) is reported in - * units per millimeter (units/mm), resolution for rotational axes - * (ABS_RX, ABS_RY, ABS_RZ) is reported in units per radian. - */ -struct input_absinfo { - __s32 value; - __s32 minimum; - __s32 maximum; - __s32 fuzz; - __s32 flat; - __s32 resolution; -}; - -/** - * struct input_keymap_entry - used by EVIOCGKEYCODE/EVIOCSKEYCODE ioctls - * @scancode: scancode represented in machine-endian form. - * @len: length of the scancode that resides in @scancode buffer. - * @index: index in the keymap, may be used instead of scancode - * @flags: allows to specify how kernel should handle the request. For - * example, setting INPUT_KEYMAP_BY_INDEX flag indicates that kernel - * should perform lookup in keymap by @index instead of @scancode - * @keycode: key code assigned to this scancode - * - * The structure is used to retrieve and modify keymap data. Users have - * option of performing lookup either by @scancode itself or by @index - * in keymap entry. EVIOCGKEYCODE will also return scancode or index - * (depending on which element was used to perform lookup). - */ -struct input_keymap_entry { -#define INPUT_KEYMAP_BY_INDEX (1 << 0) - __u8 flags; - __u8 len; - __u16 index; - __u32 keycode; - __u8 scancode[32]; -}; - -#define EVIOCGVERSION _IOR('E', 0x01, int) /* get driver version */ -#define EVIOCGID _IOR('E', 0x02, struct input_id) /* get device ID */ -#define EVIOCGREP _IOR('E', 0x03, unsigned int[2]) /* get repeat settings */ -#define EVIOCSREP _IOW('E', 0x03, unsigned int[2]) /* set repeat settings */ - -#define EVIOCGKEYCODE _IOR('E', 0x04, unsigned int[2]) /* get keycode */ -#define EVIOCGKEYCODE_V2 _IOR('E', 0x04, struct input_keymap_entry) -#define EVIOCSKEYCODE _IOW('E', 0x04, unsigned int[2]) /* set keycode */ -#define EVIOCSKEYCODE_V2 _IOW('E', 0x04, struct input_keymap_entry) - -#define EVIOCGNAME(len) _IOC(_IOC_READ, 'E', 0x06, len) /* get device name */ -#define EVIOCGPHYS(len) _IOC(_IOC_READ, 'E', 0x07, len) /* get physical location */ -#define EVIOCGUNIQ(len) _IOC(_IOC_READ, 'E', 0x08, len) /* get unique identifier */ -#define EVIOCGPROP(len) _IOC(_IOC_READ, 'E', 0x09, len) /* get device properties */ - -/** - * EVIOCGMTSLOTS(len) - get MT slot values - * @len: size of the data buffer in bytes - * - * The ioctl buffer argument should be binary equivalent to - * - * struct input_mt_request_layout { - * __u32 code; - * __s32 values[num_slots]; - * }; - * - * where num_slots is the (arbitrary) number of MT slots to extract. - * - * The ioctl size argument (len) is the size of the buffer, which - * should satisfy len = (num_slots + 1) * sizeof(__s32). If len is - * too small to fit all available slots, the first num_slots are - * returned. - * - * Before the call, code is set to the wanted ABS_MT event type. On - * return, values[] is filled with the slot values for the specified - * ABS_MT code. - * - * If the request code is not an ABS_MT value, -EINVAL is returned. - */ -#define EVIOCGMTSLOTS(len) _IOC(_IOC_READ, 'E', 0x0a, len) - -#define EVIOCGKEY(len) _IOC(_IOC_READ, 'E', 0x18, len) /* get global key state */ -#define EVIOCGLED(len) _IOC(_IOC_READ, 'E', 0x19, len) /* get all LEDs */ -#define EVIOCGSND(len) _IOC(_IOC_READ, 'E', 0x1a, len) /* get all sounds status */ -#define EVIOCGSW(len) _IOC(_IOC_READ, 'E', 0x1b, len) /* get all switch states */ - -#define EVIOCGBIT(ev,len) _IOC(_IOC_READ, 'E', 0x20 + (ev), len) /* get event bits */ -#define EVIOCGABS(abs) _IOR('E', 0x40 + (abs), struct input_absinfo) /* get abs value/limits */ -#define EVIOCSABS(abs) _IOW('E', 0xc0 + (abs), struct input_absinfo) /* set abs value/limits */ - -#define EVIOCSFF _IOC(_IOC_WRITE, 'E', 0x80, sizeof(struct ff_effect)) /* send a force effect to a force feedback device */ -#define EVIOCRMFF _IOW('E', 0x81, int) /* Erase a force effect */ -#define EVIOCGEFFECTS _IOR('E', 0x84, int) /* Report number of effects playable at the same time */ - -#define EVIOCGRAB _IOW('E', 0x90, int) /* Grab/Release device */ - -#define EVIOCSCLOCKID _IOW('E', 0xa0, int) /* Set clockid to be used for timestamps */ - -/* - * Device properties and quirks - */ - -#define INPUT_PROP_POINTER 0x00 /* needs a pointer */ -#define INPUT_PROP_DIRECT 0x01 /* direct input devices */ -#define INPUT_PROP_BUTTONPAD 0x02 /* has button(s) under pad */ -#define INPUT_PROP_SEMI_MT 0x03 /* touch rectangle only */ - -#define INPUT_PROP_MAX 0x1f -#define INPUT_PROP_CNT (INPUT_PROP_MAX + 1) - -/* - * Event types - */ - -#define EV_SYN 0x00 -#define EV_KEY 0x01 -#define EV_REL 0x02 -#define EV_ABS 0x03 -#define EV_MSC 0x04 -#define EV_SW 0x05 -#define EV_LED 0x11 -#define EV_SND 0x12 -#define EV_REP 0x14 -#define EV_FF 0x15 -#define EV_PWR 0x16 -#define EV_FF_STATUS 0x17 -#define EV_MAX 0x1f -#define EV_CNT (EV_MAX+1) - -/* - * Synchronization events. - */ - -#define SYN_REPORT 0 -#define SYN_CONFIG 1 -#define SYN_MT_REPORT 2 -#define SYN_DROPPED 3 - -/* - * Keys and buttons - * - * Most of the keys/buttons are modeled after USB HUT 1.12 - * (see http://www.usb.org/developers/hidpage). - * Abbreviations in the comments: - * AC - Application Control - * AL - Application Launch Button - * SC - System Control - */ - -#define KEY_RESERVED 0 -#define KEY_ESC 1 -#define KEY_1 2 -#define KEY_2 3 -#define KEY_3 4 -#define KEY_4 5 -#define KEY_5 6 -#define KEY_6 7 -#define KEY_7 8 -#define KEY_8 9 -#define KEY_9 10 -#define KEY_0 11 -#define KEY_MINUS 12 -#define KEY_EQUAL 13 -#define KEY_BACKSPACE 14 -#define KEY_TAB 15 -#define KEY_Q 16 -#define KEY_W 17 -#define KEY_E 18 -#define KEY_R 19 -#define KEY_T 20 -#define KEY_Y 21 -#define KEY_U 22 -#define KEY_I 23 -#define KEY_O 24 -#define KEY_P 25 -#define KEY_LEFTBRACE 26 -#define KEY_RIGHTBRACE 27 -#define KEY_ENTER 28 -#define KEY_LEFTCTRL 29 -#define KEY_A 30 -#define KEY_S 31 -#define KEY_D 32 -#define KEY_F 33 -#define KEY_G 34 -#define KEY_H 35 -#define KEY_J 36 -#define KEY_K 37 -#define KEY_L 38 -#define KEY_SEMICOLON 39 -#define KEY_APOSTROPHE 40 -#define KEY_GRAVE 41 -#define KEY_LEFTSHIFT 42 -#define KEY_BACKSLASH 43 -#define KEY_Z 44 -#define KEY_X 45 -#define KEY_C 46 -#define KEY_V 47 -#define KEY_B 48 -#define KEY_N 49 -#define KEY_M 50 -#define KEY_COMMA 51 -#define KEY_DOT 52 -#define KEY_SLASH 53 -#define KEY_RIGHTSHIFT 54 -#define KEY_KPASTERISK 55 -#define KEY_LEFTALT 56 -#define KEY_SPACE 57 -#define KEY_CAPSLOCK 58 -#define KEY_F1 59 -#define KEY_F2 60 -#define KEY_F3 61 -#define KEY_F4 62 -#define KEY_F5 63 -#define KEY_F6 64 -#define KEY_F7 65 -#define KEY_F8 66 -#define KEY_F9 67 -#define KEY_F10 68 -#define KEY_NUMLOCK 69 -#define KEY_SCROLLLOCK 70 -#define KEY_KP7 71 -#define KEY_KP8 72 -#define KEY_KP9 73 -#define KEY_KPMINUS 74 -#define KEY_KP4 75 -#define KEY_KP5 76 -#define KEY_KP6 77 -#define KEY_KPPLUS 78 -#define KEY_KP1 79 -#define KEY_KP2 80 -#define KEY_KP3 81 -#define KEY_KP0 82 -#define KEY_KPDOT 83 - -#define KEY_ZENKAKUHANKAKU 85 -#define KEY_102ND 86 -#define KEY_F11 87 -#define KEY_F12 88 -#define KEY_RO 89 -#define KEY_KATAKANA 90 -#define KEY_HIRAGANA 91 -#define KEY_HENKAN 92 -#define KEY_KATAKANAHIRAGANA 93 -#define KEY_MUHENKAN 94 -#define KEY_KPJPCOMMA 95 -#define KEY_KPENTER 96 -#define KEY_RIGHTCTRL 97 -#define KEY_KPSLASH 98 -#define KEY_SYSRQ 99 -#define KEY_RIGHTALT 100 -#define KEY_LINEFEED 101 -#define KEY_HOME 102 -#define KEY_UP 103 -#define KEY_PAGEUP 104 -#define KEY_LEFT 105 -#define KEY_RIGHT 106 -#define KEY_END 107 -#define KEY_DOWN 108 -#define KEY_PAGEDOWN 109 -#define KEY_INSERT 110 -#define KEY_DELETE 111 -#define KEY_MACRO 112 -#define KEY_MUTE 113 -#define KEY_VOLUMEDOWN 114 -#define KEY_VOLUMEUP 115 -#define KEY_POWER 116 /* SC System Power Down */ -#define KEY_KPEQUAL 117 -#define KEY_KPPLUSMINUS 118 -#define KEY_PAUSE 119 -#define KEY_SCALE 120 /* AL Compiz Scale (Expose) */ - -#define KEY_KPCOMMA 121 -#define KEY_HANGEUL 122 -#define KEY_HANGUEL KEY_HANGEUL -#define KEY_HANJA 123 -#define KEY_YEN 124 -#define KEY_LEFTMETA 125 -#define KEY_RIGHTMETA 126 -#define KEY_COMPOSE 127 - -#define KEY_STOP 128 /* AC Stop */ -#define KEY_AGAIN 129 -#define KEY_PROPS 130 /* AC Properties */ -#define KEY_UNDO 131 /* AC Undo */ -#define KEY_FRONT 132 -#define KEY_COPY 133 /* AC Copy */ -#define KEY_OPEN 134 /* AC Open */ -#define KEY_PASTE 135 /* AC Paste */ -#define KEY_FIND 136 /* AC Search */ -#define KEY_CUT 137 /* AC Cut */ -#define KEY_HELP 138 /* AL Integrated Help Center */ -#define KEY_MENU 139 /* Menu (show menu) */ -#define KEY_CALC 140 /* AL Calculator */ -#define KEY_SETUP 141 -#define KEY_SLEEP 142 /* SC System Sleep */ -#define KEY_WAKEUP 143 /* System Wake Up */ -#define KEY_FILE 144 /* AL Local Machine Browser */ -#define KEY_SENDFILE 145 -#define KEY_DELETEFILE 146 -#define KEY_XFER 147 -#define KEY_PROG1 148 -#define KEY_PROG2 149 -#define KEY_WWW 150 /* AL Internet Browser */ -#define KEY_MSDOS 151 -#define KEY_COFFEE 152 /* AL Terminal Lock/Screensaver */ -#define KEY_SCREENLOCK KEY_COFFEE -#define KEY_DIRECTION 153 -#define KEY_CYCLEWINDOWS 154 -#define KEY_MAIL 155 -#define KEY_BOOKMARKS 156 /* AC Bookmarks */ -#define KEY_COMPUTER 157 -#define KEY_BACK 158 /* AC Back */ -#define KEY_FORWARD 159 /* AC Forward */ -#define KEY_CLOSECD 160 -#define KEY_EJECTCD 161 -#define KEY_EJECTCLOSECD 162 -#define KEY_NEXTSONG 163 -#define KEY_PLAYPAUSE 164 -#define KEY_PREVIOUSSONG 165 -#define KEY_STOPCD 166 -#define KEY_RECORD 167 -#define KEY_REWIND 168 -#define KEY_PHONE 169 /* Media Select Telephone */ -#define KEY_ISO 170 -#define KEY_CONFIG 171 /* AL Consumer Control Configuration */ -#define KEY_HOMEPAGE 172 /* AC Home */ -#define KEY_REFRESH 173 /* AC Refresh */ -#define KEY_EXIT 174 /* AC Exit */ -#define KEY_MOVE 175 -#define KEY_EDIT 176 -#define KEY_SCROLLUP 177 -#define KEY_SCROLLDOWN 178 -#define KEY_KPLEFTPAREN 179 -#define KEY_KPRIGHTPAREN 180 -#define KEY_NEW 181 /* AC New */ -#define KEY_REDO 182 /* AC Redo/Repeat */ - -#define KEY_F13 183 -#define KEY_F14 184 -#define KEY_F15 185 -#define KEY_F16 186 -#define KEY_F17 187 -#define KEY_F18 188 -#define KEY_F19 189 -#define KEY_F20 190 -#define KEY_F21 191 -#define KEY_F22 192 -#define KEY_F23 193 -#define KEY_F24 194 - -#define KEY_PLAYCD 200 -#define KEY_PAUSECD 201 -#define KEY_PROG3 202 -#define KEY_PROG4 203 -#define KEY_DASHBOARD 204 /* AL Dashboard */ -#define KEY_SUSPEND 205 -#define KEY_CLOSE 206 /* AC Close */ -#define KEY_PLAY 207 -#define KEY_FASTFORWARD 208 -#define KEY_BASSBOOST 209 -#define KEY_PRINT 210 /* AC Print */ -#define KEY_HP 211 -#define KEY_CAMERA 212 -#define KEY_SOUND 213 -#define KEY_QUESTION 214 -#define KEY_EMAIL 215 -#define KEY_CHAT 216 -#define KEY_SEARCH 217 -#define KEY_CONNECT 218 -#define KEY_FINANCE 219 /* AL Checkbook/Finance */ -#define KEY_SPORT 220 -#define KEY_SHOP 221 -#define KEY_ALTERASE 222 -#define KEY_CANCEL 223 /* AC Cancel */ -#define KEY_BRIGHTNESSDOWN 224 -#define KEY_BRIGHTNESSUP 225 -#define KEY_MEDIA 226 - -#define KEY_SWITCHVIDEOMODE 227 /* Cycle between available video - outputs (Monitor/LCD/TV-out/etc) */ -#define KEY_KBDILLUMTOGGLE 228 -#define KEY_KBDILLUMDOWN 229 -#define KEY_KBDILLUMUP 230 - -#define KEY_SEND 231 /* AC Send */ -#define KEY_REPLY 232 /* AC Reply */ -#define KEY_FORWARDMAIL 233 /* AC Forward Msg */ -#define KEY_SAVE 234 /* AC Save */ -#define KEY_DOCUMENTS 235 - -#define KEY_BATTERY 236 - -#define KEY_BLUETOOTH 237 -#define KEY_WLAN 238 -#define KEY_UWB 239 - -#define KEY_UNKNOWN 240 - -#define KEY_VIDEO_NEXT 241 /* drive next video source */ -#define KEY_VIDEO_PREV 242 /* drive previous video source */ -#define KEY_BRIGHTNESS_CYCLE 243 /* brightness up, after max is min */ -#define KEY_BRIGHTNESS_ZERO 244 /* brightness off, use ambient */ -#define KEY_DISPLAY_OFF 245 /* display device to off state */ - -#define KEY_WIMAX 246 -#define KEY_RFKILL 247 /* Key that controls all radios */ - -#define KEY_MICMUTE 248 /* Mute / unmute the microphone */ - -/* Code 255 is reserved for special needs of AT keyboard driver */ - -#define BTN_MISC 0x100 -#define BTN_0 0x100 -#define BTN_1 0x101 -#define BTN_2 0x102 -#define BTN_3 0x103 -#define BTN_4 0x104 -#define BTN_5 0x105 -#define BTN_6 0x106 -#define BTN_7 0x107 -#define BTN_8 0x108 -#define BTN_9 0x109 - -#define BTN_MOUSE 0x110 -#define BTN_LEFT 0x110 -#define BTN_RIGHT 0x111 -#define BTN_MIDDLE 0x112 -#define BTN_SIDE 0x113 -#define BTN_EXTRA 0x114 -#define BTN_FORWARD 0x115 -#define BTN_BACK 0x116 -#define BTN_TASK 0x117 - -#define BTN_JOYSTICK 0x120 -#define BTN_TRIGGER 0x120 -#define BTN_THUMB 0x121 -#define BTN_THUMB2 0x122 -#define BTN_TOP 0x123 -#define BTN_TOP2 0x124 -#define BTN_PINKIE 0x125 -#define BTN_BASE 0x126 -#define BTN_BASE2 0x127 -#define BTN_BASE3 0x128 -#define BTN_BASE4 0x129 -#define BTN_BASE5 0x12a -#define BTN_BASE6 0x12b -#define BTN_DEAD 0x12f - -#define BTN_GAMEPAD 0x130 -#define BTN_A 0x130 -#define BTN_B 0x131 -#define BTN_C 0x132 -#define BTN_X 0x133 -#define BTN_Y 0x134 -#define BTN_Z 0x135 -#define BTN_TL 0x136 -#define BTN_TR 0x137 -#define BTN_TL2 0x138 -#define BTN_TR2 0x139 -#define BTN_SELECT 0x13a -#define BTN_START 0x13b -#define BTN_MODE 0x13c -#define BTN_THUMBL 0x13d -#define BTN_THUMBR 0x13e - -#define BTN_DIGI 0x140 -#define BTN_TOOL_PEN 0x140 -#define BTN_TOOL_RUBBER 0x141 -#define BTN_TOOL_BRUSH 0x142 -#define BTN_TOOL_PENCIL 0x143 -#define BTN_TOOL_AIRBRUSH 0x144 -#define BTN_TOOL_FINGER 0x145 -#define BTN_TOOL_MOUSE 0x146 -#define BTN_TOOL_LENS 0x147 -#define BTN_TOOL_QUINTTAP 0x148 /* Five fingers on trackpad */ -#define BTN_TOUCH 0x14a -#define BTN_STYLUS 0x14b -#define BTN_STYLUS2 0x14c -#define BTN_TOOL_DOUBLETAP 0x14d -#define BTN_TOOL_TRIPLETAP 0x14e -#define BTN_TOOL_QUADTAP 0x14f /* Four fingers on trackpad */ - -#define BTN_WHEEL 0x150 -#define BTN_GEAR_DOWN 0x150 -#define BTN_GEAR_UP 0x151 - -#define KEY_OK 0x160 -#define KEY_SELECT 0x161 -#define KEY_GOTO 0x162 -#define KEY_CLEAR 0x163 -#define KEY_POWER2 0x164 -#define KEY_OPTION 0x165 -#define KEY_INFO 0x166 /* AL OEM Features/Tips/Tutorial */ -#define KEY_TIME 0x167 -#define KEY_VENDOR 0x168 -#define KEY_ARCHIVE 0x169 -#define KEY_PROGRAM 0x16a /* Media Select Program Guide */ -#define KEY_CHANNEL 0x16b -#define KEY_FAVORITES 0x16c -#define KEY_EPG 0x16d -#define KEY_PVR 0x16e /* Media Select Home */ -#define KEY_MHP 0x16f -#define KEY_LANGUAGE 0x170 -#define KEY_TITLE 0x171 -#define KEY_SUBTITLE 0x172 -#define KEY_ANGLE 0x173 -#define KEY_ZOOM 0x174 -#define KEY_MODE 0x175 -#define KEY_KEYBOARD 0x176 -#define KEY_SCREEN 0x177 -#define KEY_PC 0x178 /* Media Select Computer */ -#define KEY_TV 0x179 /* Media Select TV */ -#define KEY_TV2 0x17a /* Media Select Cable */ -#define KEY_VCR 0x17b /* Media Select VCR */ -#define KEY_VCR2 0x17c /* VCR Plus */ -#define KEY_SAT 0x17d /* Media Select Satellite */ -#define KEY_SAT2 0x17e -#define KEY_CD 0x17f /* Media Select CD */ -#define KEY_TAPE 0x180 /* Media Select Tape */ -#define KEY_RADIO 0x181 -#define KEY_TUNER 0x182 /* Media Select Tuner */ -#define KEY_PLAYER 0x183 -#define KEY_TEXT 0x184 -#define KEY_DVD 0x185 /* Media Select DVD */ -#define KEY_AUX 0x186 -#define KEY_MP3 0x187 -#define KEY_AUDIO 0x188 /* AL Audio Browser */ -#define KEY_VIDEO 0x189 /* AL Movie Browser */ -#define KEY_DIRECTORY 0x18a -#define KEY_LIST 0x18b -#define KEY_MEMO 0x18c /* Media Select Messages */ -#define KEY_CALENDAR 0x18d -#define KEY_RED 0x18e -#define KEY_GREEN 0x18f -#define KEY_YELLOW 0x190 -#define KEY_BLUE 0x191 -#define KEY_CHANNELUP 0x192 /* Channel Increment */ -#define KEY_CHANNELDOWN 0x193 /* Channel Decrement */ -#define KEY_FIRST 0x194 -#define KEY_LAST 0x195 /* Recall Last */ -#define KEY_AB 0x196 -#define KEY_NEXT 0x197 -#define KEY_RESTART 0x198 -#define KEY_SLOW 0x199 -#define KEY_SHUFFLE 0x19a -#define KEY_BREAK 0x19b -#define KEY_PREVIOUS 0x19c -#define KEY_DIGITS 0x19d -#define KEY_TEEN 0x19e -#define KEY_TWEN 0x19f -#define KEY_VIDEOPHONE 0x1a0 /* Media Select Video Phone */ -#define KEY_GAMES 0x1a1 /* Media Select Games */ -#define KEY_ZOOMIN 0x1a2 /* AC Zoom In */ -#define KEY_ZOOMOUT 0x1a3 /* AC Zoom Out */ -#define KEY_ZOOMRESET 0x1a4 /* AC Zoom */ -#define KEY_WORDPROCESSOR 0x1a5 /* AL Word Processor */ -#define KEY_EDITOR 0x1a6 /* AL Text Editor */ -#define KEY_SPREADSHEET 0x1a7 /* AL Spreadsheet */ -#define KEY_GRAPHICSEDITOR 0x1a8 /* AL Graphics Editor */ -#define KEY_PRESENTATION 0x1a9 /* AL Presentation App */ -#define KEY_DATABASE 0x1aa /* AL Database App */ -#define KEY_NEWS 0x1ab /* AL Newsreader */ -#define KEY_VOICEMAIL 0x1ac /* AL Voicemail */ -#define KEY_ADDRESSBOOK 0x1ad /* AL Contacts/Address Book */ -#define KEY_MESSENGER 0x1ae /* AL Instant Messaging */ -#define KEY_DISPLAYTOGGLE 0x1af /* Turn display (LCD) on and off */ -#define KEY_SPELLCHECK 0x1b0 /* AL Spell Check */ -#define KEY_LOGOFF 0x1b1 /* AL Logoff */ - -#define KEY_DOLLAR 0x1b2 -#define KEY_EURO 0x1b3 - -#define KEY_FRAMEBACK 0x1b4 /* Consumer - transport controls */ -#define KEY_FRAMEFORWARD 0x1b5 -#define KEY_CONTEXT_MENU 0x1b6 /* GenDesc - system context menu */ -#define KEY_MEDIA_REPEAT 0x1b7 /* Consumer - transport control */ -#define KEY_10CHANNELSUP 0x1b8 /* 10 channels up (10+) */ -#define KEY_10CHANNELSDOWN 0x1b9 /* 10 channels down (10-) */ -#define KEY_IMAGES 0x1ba /* AL Image Browser */ - -#define KEY_DEL_EOL 0x1c0 -#define KEY_DEL_EOS 0x1c1 -#define KEY_INS_LINE 0x1c2 -#define KEY_DEL_LINE 0x1c3 - -#define KEY_FN 0x1d0 -#define KEY_FN_ESC 0x1d1 -#define KEY_FN_F1 0x1d2 -#define KEY_FN_F2 0x1d3 -#define KEY_FN_F3 0x1d4 -#define KEY_FN_F4 0x1d5 -#define KEY_FN_F5 0x1d6 -#define KEY_FN_F6 0x1d7 -#define KEY_FN_F7 0x1d8 -#define KEY_FN_F8 0x1d9 -#define KEY_FN_F9 0x1da -#define KEY_FN_F10 0x1db -#define KEY_FN_F11 0x1dc -#define KEY_FN_F12 0x1dd -#define KEY_FN_1 0x1de -#define KEY_FN_2 0x1df -#define KEY_FN_D 0x1e0 -#define KEY_FN_E 0x1e1 -#define KEY_FN_F 0x1e2 -#define KEY_FN_S 0x1e3 -#define KEY_FN_B 0x1e4 - -#define KEY_BRL_DOT1 0x1f1 -#define KEY_BRL_DOT2 0x1f2 -#define KEY_BRL_DOT3 0x1f3 -#define KEY_BRL_DOT4 0x1f4 -#define KEY_BRL_DOT5 0x1f5 -#define KEY_BRL_DOT6 0x1f6 -#define KEY_BRL_DOT7 0x1f7 -#define KEY_BRL_DOT8 0x1f8 -#define KEY_BRL_DOT9 0x1f9 -#define KEY_BRL_DOT10 0x1fa - -#define KEY_NUMERIC_0 0x200 /* used by phones, remote controls, */ -#define KEY_NUMERIC_1 0x201 /* and other keypads */ -#define KEY_NUMERIC_2 0x202 -#define KEY_NUMERIC_3 0x203 -#define KEY_NUMERIC_4 0x204 -#define KEY_NUMERIC_5 0x205 -#define KEY_NUMERIC_6 0x206 -#define KEY_NUMERIC_7 0x207 -#define KEY_NUMERIC_8 0x208 -#define KEY_NUMERIC_9 0x209 -#define KEY_NUMERIC_STAR 0x20a -#define KEY_NUMERIC_POUND 0x20b - -#define KEY_CAMERA_FOCUS 0x210 -#define KEY_WPS_BUTTON 0x211 /* WiFi Protected Setup key */ - -#define KEY_TOUCHPAD_TOGGLE 0x212 /* Request switch touchpad on or off */ -#define KEY_TOUCHPAD_ON 0x213 -#define KEY_TOUCHPAD_OFF 0x214 - -#define KEY_CAMERA_ZOOMIN 0x215 -#define KEY_CAMERA_ZOOMOUT 0x216 -#define KEY_CAMERA_UP 0x217 -#define KEY_CAMERA_DOWN 0x218 -#define KEY_CAMERA_LEFT 0x219 -#define KEY_CAMERA_RIGHT 0x21a - -#define BTN_TRIGGER_HAPPY 0x2c0 -#define BTN_TRIGGER_HAPPY1 0x2c0 -#define BTN_TRIGGER_HAPPY2 0x2c1 -#define BTN_TRIGGER_HAPPY3 0x2c2 -#define BTN_TRIGGER_HAPPY4 0x2c3 -#define BTN_TRIGGER_HAPPY5 0x2c4 -#define BTN_TRIGGER_HAPPY6 0x2c5 -#define BTN_TRIGGER_HAPPY7 0x2c6 -#define BTN_TRIGGER_HAPPY8 0x2c7 -#define BTN_TRIGGER_HAPPY9 0x2c8 -#define BTN_TRIGGER_HAPPY10 0x2c9 -#define BTN_TRIGGER_HAPPY11 0x2ca -#define BTN_TRIGGER_HAPPY12 0x2cb -#define BTN_TRIGGER_HAPPY13 0x2cc -#define BTN_TRIGGER_HAPPY14 0x2cd -#define BTN_TRIGGER_HAPPY15 0x2ce -#define BTN_TRIGGER_HAPPY16 0x2cf -#define BTN_TRIGGER_HAPPY17 0x2d0 -#define BTN_TRIGGER_HAPPY18 0x2d1 -#define BTN_TRIGGER_HAPPY19 0x2d2 -#define BTN_TRIGGER_HAPPY20 0x2d3 -#define BTN_TRIGGER_HAPPY21 0x2d4 -#define BTN_TRIGGER_HAPPY22 0x2d5 -#define BTN_TRIGGER_HAPPY23 0x2d6 -#define BTN_TRIGGER_HAPPY24 0x2d7 -#define BTN_TRIGGER_HAPPY25 0x2d8 -#define BTN_TRIGGER_HAPPY26 0x2d9 -#define BTN_TRIGGER_HAPPY27 0x2da -#define BTN_TRIGGER_HAPPY28 0x2db -#define BTN_TRIGGER_HAPPY29 0x2dc -#define BTN_TRIGGER_HAPPY30 0x2dd -#define BTN_TRIGGER_HAPPY31 0x2de -#define BTN_TRIGGER_HAPPY32 0x2df -#define BTN_TRIGGER_HAPPY33 0x2e0 -#define BTN_TRIGGER_HAPPY34 0x2e1 -#define BTN_TRIGGER_HAPPY35 0x2e2 -#define BTN_TRIGGER_HAPPY36 0x2e3 -#define BTN_TRIGGER_HAPPY37 0x2e4 -#define BTN_TRIGGER_HAPPY38 0x2e5 -#define BTN_TRIGGER_HAPPY39 0x2e6 -#define BTN_TRIGGER_HAPPY40 0x2e7 - -/* We avoid low common keys in module aliases so they don't get huge. */ -#define KEY_MIN_INTERESTING KEY_MUTE -#define KEY_MAX 0x2ff -#define KEY_CNT (KEY_MAX+1) - -/* - * Relative axes - */ - -#define REL_X 0x00 -#define REL_Y 0x01 -#define REL_Z 0x02 -#define REL_RX 0x03 -#define REL_RY 0x04 -#define REL_RZ 0x05 -#define REL_HWHEEL 0x06 -#define REL_DIAL 0x07 -#define REL_WHEEL 0x08 -#define REL_MISC 0x09 -#define REL_MAX 0x0f -#define REL_CNT (REL_MAX+1) - -/* - * Absolute axes - */ - -#define ABS_X 0x00 -#define ABS_Y 0x01 -#define ABS_Z 0x02 -#define ABS_RX 0x03 -#define ABS_RY 0x04 -#define ABS_RZ 0x05 -#define ABS_THROTTLE 0x06 -#define ABS_RUDDER 0x07 -#define ABS_WHEEL 0x08 -#define ABS_GAS 0x09 -#define ABS_BRAKE 0x0a -#define ABS_HAT0X 0x10 -#define ABS_HAT0Y 0x11 -#define ABS_HAT1X 0x12 -#define ABS_HAT1Y 0x13 -#define ABS_HAT2X 0x14 -#define ABS_HAT2Y 0x15 -#define ABS_HAT3X 0x16 -#define ABS_HAT3Y 0x17 -#define ABS_PRESSURE 0x18 -#define ABS_DISTANCE 0x19 -#define ABS_TILT_X 0x1a -#define ABS_TILT_Y 0x1b -#define ABS_TOOL_WIDTH 0x1c - -#define ABS_VOLUME 0x20 - -#define ABS_MISC 0x28 - -#define ABS_MT_SLOT 0x2f /* MT slot being modified */ -#define ABS_MT_TOUCH_MAJOR 0x30 /* Major axis of touching ellipse */ -#define ABS_MT_TOUCH_MINOR 0x31 /* Minor axis (omit if circular) */ -#define ABS_MT_WIDTH_MAJOR 0x32 /* Major axis of approaching ellipse */ -#define ABS_MT_WIDTH_MINOR 0x33 /* Minor axis (omit if circular) */ -#define ABS_MT_ORIENTATION 0x34 /* Ellipse orientation */ -#define ABS_MT_POSITION_X 0x35 /* Center X touch position */ -#define ABS_MT_POSITION_Y 0x36 /* Center Y touch position */ -#define ABS_MT_TOOL_TYPE 0x37 /* Type of touching device */ -#define ABS_MT_BLOB_ID 0x38 /* Group a set of packets as a blob */ -#define ABS_MT_TRACKING_ID 0x39 /* Unique ID of initiated contact */ -#define ABS_MT_PRESSURE 0x3a /* Pressure on contact area */ -#define ABS_MT_DISTANCE 0x3b /* Contact hover distance */ -#define ABS_MT_TOOL_X 0x3c /* Center X tool position */ -#define ABS_MT_TOOL_Y 0x3d /* Center Y tool position */ - -#ifdef __KERNEL__ +#include <uapi/linux/input.h> /* Implementation details, userspace should not care about these */ #define ABS_MT_FIRST ABS_MT_TOUCH_MAJOR #define ABS_MT_LAST ABS_MT_TOOL_Y -#endif - -#define ABS_MAX 0x3f -#define ABS_CNT (ABS_MAX+1) - -/* - * Switch events - */ - -#define SW_LID 0x00 /* set = lid shut */ -#define SW_TABLET_MODE 0x01 /* set = tablet mode */ -#define SW_HEADPHONE_INSERT 0x02 /* set = inserted */ -#define SW_RFKILL_ALL 0x03 /* rfkill master switch, type "any" - set = radio enabled */ -#define SW_RADIO SW_RFKILL_ALL /* deprecated */ -#define SW_MICROPHONE_INSERT 0x04 /* set = inserted */ -#define SW_DOCK 0x05 /* set = plugged into dock */ -#define SW_LINEOUT_INSERT 0x06 /* set = inserted */ -#define SW_JACK_PHYSICAL_INSERT 0x07 /* set = mechanical switch set */ -#define SW_VIDEOOUT_INSERT 0x08 /* set = inserted */ -#define SW_CAMERA_LENS_COVER 0x09 /* set = lens covered */ -#define SW_KEYPAD_SLIDE 0x0a /* set = keypad slide out */ -#define SW_FRONT_PROXIMITY 0x0b /* set = front proximity sensor active */ -#define SW_ROTATE_LOCK 0x0c /* set = rotate locked/disabled */ -#define SW_LINEIN_INSERT 0x0d /* set = inserted */ -#define SW_MAX 0x0f -#define SW_CNT (SW_MAX+1) - -/* - * Misc events - */ - -#define MSC_SERIAL 0x00 -#define MSC_PULSELED 0x01 -#define MSC_GESTURE 0x02 -#define MSC_RAW 0x03 -#define MSC_SCAN 0x04 -#define MSC_MAX 0x07 -#define MSC_CNT (MSC_MAX+1) - -/* - * LEDs - */ - -#define LED_NUML 0x00 -#define LED_CAPSL 0x01 -#define LED_SCROLLL 0x02 -#define LED_COMPOSE 0x03 -#define LED_KANA 0x04 -#define LED_SLEEP 0x05 -#define LED_SUSPEND 0x06 -#define LED_MUTE 0x07 -#define LED_MISC 0x08 -#define LED_MAIL 0x09 -#define LED_CHARGING 0x0a -#define LED_MAX 0x0f -#define LED_CNT (LED_MAX+1) - -/* - * Autorepeat values - */ - -#define REP_DELAY 0x00 -#define REP_PERIOD 0x01 -#define REP_MAX 0x01 -#define REP_CNT (REP_MAX+1) - -/* - * Sounds - */ - -#define SND_CLICK 0x00 -#define SND_BELL 0x01 -#define SND_TONE 0x02 -#define SND_MAX 0x07 -#define SND_CNT (SND_MAX+1) - -/* - * IDs. - */ - -#define ID_BUS 0 -#define ID_VENDOR 1 -#define ID_PRODUCT 2 -#define ID_VERSION 3 - -#define BUS_PCI 0x01 -#define BUS_ISAPNP 0x02 -#define BUS_USB 0x03 -#define BUS_HIL 0x04 -#define BUS_BLUETOOTH 0x05 -#define BUS_VIRTUAL 0x06 - -#define BUS_ISA 0x10 -#define BUS_I8042 0x11 -#define BUS_XTKBD 0x12 -#define BUS_RS232 0x13 -#define BUS_GAMEPORT 0x14 -#define BUS_PARPORT 0x15 -#define BUS_AMIGA 0x16 -#define BUS_ADB 0x17 -#define BUS_I2C 0x18 -#define BUS_HOST 0x19 -#define BUS_GSC 0x1A -#define BUS_ATARI 0x1B -#define BUS_SPI 0x1C - -/* - * MT_TOOL types - */ -#define MT_TOOL_FINGER 0 -#define MT_TOOL_PEN 1 -#define MT_TOOL_MAX 1 - -/* - * Values describing the status of a force-feedback effect - */ -#define FF_STATUS_STOPPED 0x00 -#define FF_STATUS_PLAYING 0x01 -#define FF_STATUS_MAX 0x01 - -/* - * Structures used in ioctls to upload effects to a device - * They are pieces of a bigger structure (called ff_effect) - */ - -/* - * All duration values are expressed in ms. Values above 32767 ms (0x7fff) - * should not be used and have unspecified results. - */ - -/** - * struct ff_replay - defines scheduling of the force-feedback effect - * @length: duration of the effect - * @delay: delay before effect should start playing - */ -struct ff_replay { - __u16 length; - __u16 delay; -}; - -/** - * struct ff_trigger - defines what triggers the force-feedback effect - * @button: number of the button triggering the effect - * @interval: controls how soon the effect can be re-triggered - */ -struct ff_trigger { - __u16 button; - __u16 interval; -}; - -/** - * struct ff_envelope - generic force-feedback effect envelope - * @attack_length: duration of the attack (ms) - * @attack_level: level at the beginning of the attack - * @fade_length: duration of fade (ms) - * @fade_level: level at the end of fade - * - * The @attack_level and @fade_level are absolute values; when applying - * envelope force-feedback core will convert to positive/negative - * value based on polarity of the default level of the effect. - * Valid range for the attack and fade levels is 0x0000 - 0x7fff - */ -struct ff_envelope { - __u16 attack_length; - __u16 attack_level; - __u16 fade_length; - __u16 fade_level; -}; - -/** - * struct ff_constant_effect - defines parameters of a constant force-feedback effect - * @level: strength of the effect; may be negative - * @envelope: envelope data - */ -struct ff_constant_effect { - __s16 level; - struct ff_envelope envelope; -}; - -/** - * struct ff_ramp_effect - defines parameters of a ramp force-feedback effect - * @start_level: beginning strength of the effect; may be negative - * @end_level: final strength of the effect; may be negative - * @envelope: envelope data - */ -struct ff_ramp_effect { - __s16 start_level; - __s16 end_level; - struct ff_envelope envelope; -}; - -/** - * struct ff_condition_effect - defines a spring or friction force-feedback effect - * @right_saturation: maximum level when joystick moved all way to the right - * @left_saturation: same for the left side - * @right_coeff: controls how fast the force grows when the joystick moves - * to the right - * @left_coeff: same for the left side - * @deadband: size of the dead zone, where no force is produced - * @center: position of the dead zone - */ -struct ff_condition_effect { - __u16 right_saturation; - __u16 left_saturation; - - __s16 right_coeff; - __s16 left_coeff; - - __u16 deadband; - __s16 center; -}; - -/** - * struct ff_periodic_effect - defines parameters of a periodic force-feedback effect - * @waveform: kind of the effect (wave) - * @period: period of the wave (ms) - * @magnitude: peak value - * @offset: mean value of the wave (roughly) - * @phase: 'horizontal' shift - * @envelope: envelope data - * @custom_len: number of samples (FF_CUSTOM only) - * @custom_data: buffer of samples (FF_CUSTOM only) - * - * Known waveforms - FF_SQUARE, FF_TRIANGLE, FF_SINE, FF_SAW_UP, - * FF_SAW_DOWN, FF_CUSTOM. The exact syntax FF_CUSTOM is undefined - * for the time being as no driver supports it yet. - * - * Note: the data pointed by custom_data is copied by the driver. - * You can therefore dispose of the memory after the upload/update. - */ -struct ff_periodic_effect { - __u16 waveform; - __u16 period; - __s16 magnitude; - __s16 offset; - __u16 phase; - - struct ff_envelope envelope; - - __u32 custom_len; - __s16 __user *custom_data; -}; - -/** - * struct ff_rumble_effect - defines parameters of a periodic force-feedback effect - * @strong_magnitude: magnitude of the heavy motor - * @weak_magnitude: magnitude of the light one - * - * Some rumble pads have two motors of different weight. Strong_magnitude - * represents the magnitude of the vibration generated by the heavy one. - */ -struct ff_rumble_effect { - __u16 strong_magnitude; - __u16 weak_magnitude; -}; - -/** - * struct ff_effect - defines force feedback effect - * @type: type of the effect (FF_CONSTANT, FF_PERIODIC, FF_RAMP, FF_SPRING, - * FF_FRICTION, FF_DAMPER, FF_RUMBLE, FF_INERTIA, or FF_CUSTOM) - * @id: an unique id assigned to an effect - * @direction: direction of the effect - * @trigger: trigger conditions (struct ff_trigger) - * @replay: scheduling of the effect (struct ff_replay) - * @u: effect-specific structure (one of ff_constant_effect, ff_ramp_effect, - * ff_periodic_effect, ff_condition_effect, ff_rumble_effect) further - * defining effect parameters - * - * This structure is sent through ioctl from the application to the driver. - * To create a new effect application should set its @id to -1; the kernel - * will return assigned @id which can later be used to update or delete - * this effect. - * - * Direction of the effect is encoded as follows: - * 0 deg -> 0x0000 (down) - * 90 deg -> 0x4000 (left) - * 180 deg -> 0x8000 (up) - * 270 deg -> 0xC000 (right) - */ -struct ff_effect { - __u16 type; - __s16 id; - __u16 direction; - struct ff_trigger trigger; - struct ff_replay replay; - - union { - struct ff_constant_effect constant; - struct ff_ramp_effect ramp; - struct ff_periodic_effect periodic; - struct ff_condition_effect condition[2]; /* One for each axis */ - struct ff_rumble_effect rumble; - } u; -}; - -/* - * Force feedback effect types - */ - -#define FF_RUMBLE 0x50 -#define FF_PERIODIC 0x51 -#define FF_CONSTANT 0x52 -#define FF_SPRING 0x53 -#define FF_FRICTION 0x54 -#define FF_DAMPER 0x55 -#define FF_INERTIA 0x56 -#define FF_RAMP 0x57 - -#define FF_EFFECT_MIN FF_RUMBLE -#define FF_EFFECT_MAX FF_RAMP - -/* - * Force feedback periodic effect types - */ - -#define FF_SQUARE 0x58 -#define FF_TRIANGLE 0x59 -#define FF_SINE 0x5a -#define FF_SAW_UP 0x5b -#define FF_SAW_DOWN 0x5c -#define FF_CUSTOM 0x5d - -#define FF_WAVEFORM_MIN FF_SQUARE -#define FF_WAVEFORM_MAX FF_CUSTOM - -/* - * Set ff device properties - */ - -#define FF_GAIN 0x60 -#define FF_AUTOCENTER 0x61 - -#define FF_MAX 0x7f -#define FF_CNT (FF_MAX+1) - -#ifdef __KERNEL__ /* * In-kernel definitions. @@ -1396,8 +252,8 @@ struct input_handle; * @start: starts handler for given handle. This function is called by * input core right after connect() method and also when a process * that "grabbed" a device releases it - * @fops: file operations this driver implements - * @minor: beginning of range of 32 minors for devices this driver + * @legacy_minors: set to %true by drivers using legacy minor ranges + * @minor: beginning of range of 32 legacy minors for devices this driver * can provide * @name: name of the handler, to be shown in /proc/bus/input/handlers * @id_table: pointer to a table of input_device_ids this driver can @@ -1431,7 +287,7 @@ struct input_handler { void (*disconnect)(struct input_handle *handle); void (*start)(struct input_handle *handle); - const struct file_operations *fops; + bool legacy_minors; int minor; const char *name; @@ -1499,6 +355,10 @@ void input_reset_device(struct input_dev *); int __must_check input_register_handler(struct input_handler *); void input_unregister_handler(struct input_handler *); +int __must_check input_get_new_minor(int legacy_base, unsigned int legacy_num, + bool allow_dynamic); +void input_free_minor(unsigned int minor); + int input_handler_for_each_handle(struct input_handler *, void *data, int (*fn)(struct input_handle *, void *)); @@ -1664,4 +524,3 @@ int input_ff_create_memless(struct input_dev *dev, void *data, int (*play_effect)(struct input_dev *, void *, struct ff_effect *)); #endif -#endif diff --git a/include/linux/ip.h b/include/linux/ip.h index bd0a2a8631c..58b82a22a52 100644 --- a/include/linux/ip.h +++ b/include/linux/ip.h @@ -16,96 +16,9 @@ */ #ifndef _LINUX_IP_H #define _LINUX_IP_H -#include <linux/types.h> -#include <asm/byteorder.h> -#define IPTOS_TOS_MASK 0x1E -#define IPTOS_TOS(tos) ((tos)&IPTOS_TOS_MASK) -#define IPTOS_LOWDELAY 0x10 -#define IPTOS_THROUGHPUT 0x08 -#define IPTOS_RELIABILITY 0x04 -#define IPTOS_MINCOST 0x02 - -#define IPTOS_PREC_MASK 0xE0 -#define IPTOS_PREC(tos) ((tos)&IPTOS_PREC_MASK) -#define IPTOS_PREC_NETCONTROL 0xe0 -#define IPTOS_PREC_INTERNETCONTROL 0xc0 -#define IPTOS_PREC_CRITIC_ECP 0xa0 -#define IPTOS_PREC_FLASHOVERRIDE 0x80 -#define IPTOS_PREC_FLASH 0x60 -#define IPTOS_PREC_IMMEDIATE 0x40 -#define IPTOS_PREC_PRIORITY 0x20 -#define IPTOS_PREC_ROUTINE 0x00 - - -/* IP options */ -#define IPOPT_COPY 0x80 -#define IPOPT_CLASS_MASK 0x60 -#define IPOPT_NUMBER_MASK 0x1f - -#define IPOPT_COPIED(o) ((o)&IPOPT_COPY) -#define IPOPT_CLASS(o) ((o)&IPOPT_CLASS_MASK) -#define IPOPT_NUMBER(o) ((o)&IPOPT_NUMBER_MASK) - -#define IPOPT_CONTROL 0x00 -#define IPOPT_RESERVED1 0x20 -#define IPOPT_MEASUREMENT 0x40 -#define IPOPT_RESERVED2 0x60 - -#define IPOPT_END (0 |IPOPT_CONTROL) -#define IPOPT_NOOP (1 |IPOPT_CONTROL) -#define IPOPT_SEC (2 |IPOPT_CONTROL|IPOPT_COPY) -#define IPOPT_LSRR (3 |IPOPT_CONTROL|IPOPT_COPY) -#define IPOPT_TIMESTAMP (4 |IPOPT_MEASUREMENT) -#define IPOPT_CIPSO (6 |IPOPT_CONTROL|IPOPT_COPY) -#define IPOPT_RR (7 |IPOPT_CONTROL) -#define IPOPT_SID (8 |IPOPT_CONTROL|IPOPT_COPY) -#define IPOPT_SSRR (9 |IPOPT_CONTROL|IPOPT_COPY) -#define IPOPT_RA (20|IPOPT_CONTROL|IPOPT_COPY) - -#define IPVERSION 4 -#define MAXTTL 255 -#define IPDEFTTL 64 - -#define IPOPT_OPTVAL 0 -#define IPOPT_OLEN 1 -#define IPOPT_OFFSET 2 -#define IPOPT_MINOFF 4 -#define MAX_IPOPTLEN 40 -#define IPOPT_NOP IPOPT_NOOP -#define IPOPT_EOL IPOPT_END -#define IPOPT_TS IPOPT_TIMESTAMP - -#define IPOPT_TS_TSONLY 0 /* timestamps only */ -#define IPOPT_TS_TSANDADDR 1 /* timestamps and addresses */ -#define IPOPT_TS_PRESPEC 3 /* specified modules only */ - -#define IPV4_BEET_PHMAXLEN 8 - -struct iphdr { -#if defined(__LITTLE_ENDIAN_BITFIELD) - __u8 ihl:4, - version:4; -#elif defined (__BIG_ENDIAN_BITFIELD) - __u8 version:4, - ihl:4; -#else -#error "Please fix <asm/byteorder.h>" -#endif - __u8 tos; - __be16 tot_len; - __be16 id; - __be16 frag_off; - __u8 ttl; - __u8 protocol; - __sum16 check; - __be32 saddr; - __be32 daddr; - /*The options start here. */ -}; - -#ifdef __KERNEL__ #include <linux/skbuff.h> +#include <uapi/linux/ip.h> static inline struct iphdr *ip_hdr(const struct sk_buff *skb) { @@ -116,34 +29,4 @@ static inline struct iphdr *ipip_hdr(const struct sk_buff *skb) { return (struct iphdr *)skb_transport_header(skb); } -#endif - -struct ip_auth_hdr { - __u8 nexthdr; - __u8 hdrlen; /* This one is measured in 32 bit units! */ - __be16 reserved; - __be32 spi; - __be32 seq_no; /* Sequence number */ - __u8 auth_data[0]; /* Variable len but >=4. Mind the 64 bit alignment! */ -}; - -struct ip_esp_hdr { - __be32 spi; - __be32 seq_no; /* Sequence number */ - __u8 enc_data[0]; /* Variable len but >=8. Mind the 64 bit alignment! */ -}; - -struct ip_comp_hdr { - __u8 nexthdr; - __u8 flags; - __be16 cpi; -}; - -struct ip_beet_phdr { - __u8 nexthdr; - __u8 hdrlen; - __u8 padlen; - __u8 reserved; -}; - #endif /* _LINUX_IP_H */ diff --git a/include/linux/ipc.h b/include/linux/ipc.h index ca833fdc313..8d861b2651f 100644 --- a/include/linux/ipc.h +++ b/include/linux/ipc.h @@ -1,85 +1,9 @@ #ifndef _LINUX_IPC_H #define _LINUX_IPC_H -#include <linux/types.h> - -#define IPC_PRIVATE ((__kernel_key_t) 0) - -/* Obsolete, used only for backwards compatibility and libc5 compiles */ -struct ipc_perm -{ - __kernel_key_t key; - __kernel_uid_t uid; - __kernel_gid_t gid; - __kernel_uid_t cuid; - __kernel_gid_t cgid; - __kernel_mode_t mode; - unsigned short seq; -}; - -/* Include the definition of ipc64_perm */ -#include <asm/ipcbuf.h> - -/* resource get request flags */ -#define IPC_CREAT 00001000 /* create if key is nonexistent */ -#define IPC_EXCL 00002000 /* fail if key exists */ -#define IPC_NOWAIT 00004000 /* return error on wait */ - -/* these fields are used by the DIPC package so the kernel as standard - should avoid using them if possible */ - -#define IPC_DIPC 00010000 /* make it distributed */ -#define IPC_OWN 00020000 /* this machine is the DIPC owner */ - -/* - * Control commands used with semctl, msgctl and shmctl - * see also specific commands in sem.h, msg.h and shm.h - */ -#define IPC_RMID 0 /* remove resource */ -#define IPC_SET 1 /* set ipc_perm options */ -#define IPC_STAT 2 /* get ipc_perm options */ -#define IPC_INFO 3 /* see ipcs */ - -/* - * Version flags for semctl, msgctl, and shmctl commands - * These are passed as bitflags or-ed with the actual command - */ -#define IPC_OLD 0 /* Old version (no 32-bit UID support on many - architectures) */ -#define IPC_64 0x0100 /* New version (support 32-bit UIDs, bigger - message sizes, etc. */ - -/* - * These are used to wrap system calls. - * - * See architecture code for ugly details.. - */ -struct ipc_kludge { - struct msgbuf __user *msgp; - long msgtyp; -}; - -#define SEMOP 1 -#define SEMGET 2 -#define SEMCTL 3 -#define SEMTIMEDOP 4 -#define MSGSND 11 -#define MSGRCV 12 -#define MSGGET 13 -#define MSGCTL 14 -#define SHMAT 21 -#define SHMDT 22 -#define SHMGET 23 -#define SHMCTL 24 - -/* Used by the DIPC package, try and avoid reusing it */ -#define DIPC 25 - -#define IPCCALL(version,op) ((version)<<16 | (op)) - -#ifdef __KERNEL__ #include <linux/spinlock.h> #include <linux/uidgid.h> +#include <uapi/linux/ipc.h> #define IPCMNI 32768 /* <= MAX_INT limit for ipc arrays (including sysctl changes) */ @@ -99,6 +23,4 @@ struct kern_ipc_perm void *security; }; -#endif /* __KERNEL__ */ - #endif /* _LINUX_IPC_H */ diff --git a/include/linux/ipmi.h b/include/linux/ipmi.h index 48dcba9b206..1487e7906bb 100644 --- a/include/linux/ipmi.h +++ b/include/linux/ipmi.h @@ -30,191 +30,11 @@ * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. */ - #ifndef __LINUX_IPMI_H #define __LINUX_IPMI_H -#include <linux/ipmi_msgdefs.h> -#include <linux/compiler.h> - -/* - * This file describes an interface to an IPMI driver. You have to - * have a fairly good understanding of IPMI to use this, so go read - * the specs first before actually trying to do anything. - * - * With that said, this driver provides a multi-user interface to the - * IPMI driver, and it allows multiple IPMI physical interfaces below - * the driver. The physical interfaces bind as a lower layer on the - * driver. They appear as interfaces to the application using this - * interface. - * - * Multi-user means that multiple applications may use the driver, - * send commands, receive responses, etc. The driver keeps track of - * commands the user sends and tracks the responses. The responses - * will go back to the application that send the command. If the - * response doesn't come back in time, the driver will return a - * timeout error response to the application. Asynchronous events - * from the BMC event queue will go to all users bound to the driver. - * The incoming event queue in the BMC will automatically be flushed - * if it becomes full and it is queried once a second to see if - * anything is in it. Incoming commands to the driver will get - * delivered as commands. - * - * This driver provides two main interfaces: one for in-kernel - * applications and another for userland applications. The - * capabilities are basically the same for both interface, although - * the interfaces are somewhat different. The stuff in the - * #ifdef __KERNEL__ below is the in-kernel interface. The userland - * interface is defined later in the file. */ - - - -/* - * This is an overlay for all the address types, so it's easy to - * determine the actual address type. This is kind of like addresses - * work for sockets. - */ -#define IPMI_MAX_ADDR_SIZE 32 -struct ipmi_addr { - /* Try to take these from the "Channel Medium Type" table - in section 6.5 of the IPMI 1.5 manual. */ - int addr_type; - short channel; - char data[IPMI_MAX_ADDR_SIZE]; -}; - -/* - * When the address is not used, the type will be set to this value. - * The channel is the BMC's channel number for the channel (usually - * 0), or IPMC_BMC_CHANNEL if communicating directly with the BMC. - */ -#define IPMI_SYSTEM_INTERFACE_ADDR_TYPE 0x0c -struct ipmi_system_interface_addr { - int addr_type; - short channel; - unsigned char lun; -}; - -/* An IPMB Address. */ -#define IPMI_IPMB_ADDR_TYPE 0x01 -/* Used for broadcast get device id as described in section 17.9 of the - IPMI 1.5 manual. */ -#define IPMI_IPMB_BROADCAST_ADDR_TYPE 0x41 -struct ipmi_ipmb_addr { - int addr_type; - short channel; - unsigned char slave_addr; - unsigned char lun; -}; - -/* - * A LAN Address. This is an address to/from a LAN interface bridged - * by the BMC, not an address actually out on the LAN. - * - * A conscious decision was made here to deviate slightly from the IPMI - * spec. We do not use rqSWID and rsSWID like it shows in the - * message. Instead, we use remote_SWID and local_SWID. This means - * that any message (a request or response) from another device will - * always have exactly the same address. If you didn't do this, - * requests and responses from the same device would have different - * addresses, and that's not too cool. - * - * In this address, the remote_SWID is always the SWID the remote - * message came from, or the SWID we are sending the message to. - * local_SWID is always our SWID. Note that having our SWID in the - * message is a little weird, but this is required. - */ -#define IPMI_LAN_ADDR_TYPE 0x04 -struct ipmi_lan_addr { - int addr_type; - short channel; - unsigned char privilege; - unsigned char session_handle; - unsigned char remote_SWID; - unsigned char local_SWID; - unsigned char lun; -}; - - -/* - * Channel for talking directly with the BMC. When using this - * channel, This is for the system interface address type only. FIXME - * - is this right, or should we use -1? - */ -#define IPMI_BMC_CHANNEL 0xf -#define IPMI_NUM_CHANNELS 0x10 - -/* - * Used to signify an "all channel" bitmask. This is more than the - * actual number of channels because this is used in userland and - * will cover us if the number of channels is extended. - */ -#define IPMI_CHAN_ALL (~0) - - -/* - * A raw IPMI message without any addressing. This covers both - * commands and responses. The completion code is always the first - * byte of data in the response (as the spec shows the messages laid - * out). - */ -struct ipmi_msg { - unsigned char netfn; - unsigned char cmd; - unsigned short data_len; - unsigned char __user *data; -}; - -struct kernel_ipmi_msg { - unsigned char netfn; - unsigned char cmd; - unsigned short data_len; - unsigned char *data; -}; - -/* - * Various defines that are useful for IPMI applications. - */ -#define IPMI_INVALID_CMD_COMPLETION_CODE 0xC1 -#define IPMI_TIMEOUT_COMPLETION_CODE 0xC3 -#define IPMI_UNKNOWN_ERR_COMPLETION_CODE 0xff - +#include <uapi/linux/ipmi.h> -/* - * Receive types for messages coming from the receive interface. This - * is used for the receive in-kernel interface and in the receive - * IOCTL. - * - * The "IPMI_RESPONSE_RESPNOSE_TYPE" is a little strange sounding, but - * it allows you to get the message results when you send a response - * message. - */ -#define IPMI_RESPONSE_RECV_TYPE 1 /* A response to a command */ -#define IPMI_ASYNC_EVENT_RECV_TYPE 2 /* Something from the event queue */ -#define IPMI_CMD_RECV_TYPE 3 /* A command from somewhere else */ -#define IPMI_RESPONSE_RESPONSE_TYPE 4 /* The response for - a sent response, giving any - error status for sending the - response. When you send a - response message, this will - be returned. */ -#define IPMI_OEM_RECV_TYPE 5 /* The response for OEM Channels */ - -/* Note that async events and received commands do not have a completion - code as the first byte of the incoming data, unlike a response. */ - - -/* - * Modes for ipmi_set_maint_mode() and the userland IOCTL. The AUTO - * setting is the default and means it will be set on certain - * commands. Hard setting it on and off will override automatic - * operation. - */ -#define IPMI_MAINTENANCE_MODE_AUTO 0 -#define IPMI_MAINTENANCE_MODE_OFF 1 -#define IPMI_MAINTENANCE_MODE_ON 2 - -#ifdef __KERNEL__ /* * The in-kernel interface. @@ -493,244 +313,4 @@ struct ipmi_smi_info { /* This is to get the private info of ipmi_smi_t */ extern int ipmi_get_smi_info(int if_num, struct ipmi_smi_info *data); -#endif /* __KERNEL__ */ - - -/* - * The userland interface - */ - -/* - * The userland interface for the IPMI driver is a standard character - * device, with each instance of an interface registered as a minor - * number under the major character device. - * - * The read and write calls do not work, to get messages in and out - * requires ioctl calls because of the complexity of the data. select - * and poll do work, so you can wait for input using the file - * descriptor, you just can use read to get it. - * - * In general, you send a command down to the interface and receive - * responses back. You can use the msgid value to correlate commands - * and responses, the driver will take care of figuring out which - * incoming messages are for which command and find the proper msgid - * value to report. You will only receive reponses for commands you - * send. Asynchronous events, however, go to all open users, so you - * must be ready to handle these (or ignore them if you don't care). - * - * The address type depends upon the channel type. When talking - * directly to the BMC (IPMC_BMC_CHANNEL), the address is ignored - * (IPMI_UNUSED_ADDR_TYPE). When talking to an IPMB channel, you must - * supply a valid IPMB address with the addr_type set properly. - * - * When talking to normal channels, the driver takes care of the - * details of formatting and sending messages on that channel. You do - * not, for instance, have to format a send command, you just send - * whatever command you want to the channel, the driver will create - * the send command, automatically issue receive command and get even - * commands, and pass those up to the proper user. - */ - - -/* The magic IOCTL value for this interface. */ -#define IPMI_IOC_MAGIC 'i' - - -/* Messages sent to the interface are this format. */ -struct ipmi_req { - unsigned char __user *addr; /* Address to send the message to. */ - unsigned int addr_len; - - long msgid; /* The sequence number for the message. This - exact value will be reported back in the - response to this request if it is a command. - If it is a response, this will be used as - the sequence value for the response. */ - - struct ipmi_msg msg; -}; -/* - * Send a message to the interfaces. error values are: - * - EFAULT - an address supplied was invalid. - * - EINVAL - The address supplied was not valid, or the command - * was not allowed. - * - EMSGSIZE - The message to was too large. - * - ENOMEM - Buffers could not be allocated for the command. - */ -#define IPMICTL_SEND_COMMAND _IOR(IPMI_IOC_MAGIC, 13, \ - struct ipmi_req) - -/* Messages sent to the interface with timing parameters are this - format. */ -struct ipmi_req_settime { - struct ipmi_req req; - - /* See ipmi_request_settime() above for details on these - values. */ - int retries; - unsigned int retry_time_ms; -}; -/* - * Send a message to the interfaces with timing parameters. error values - * are: - * - EFAULT - an address supplied was invalid. - * - EINVAL - The address supplied was not valid, or the command - * was not allowed. - * - EMSGSIZE - The message to was too large. - * - ENOMEM - Buffers could not be allocated for the command. - */ -#define IPMICTL_SEND_COMMAND_SETTIME _IOR(IPMI_IOC_MAGIC, 21, \ - struct ipmi_req_settime) - -/* Messages received from the interface are this format. */ -struct ipmi_recv { - int recv_type; /* Is this a command, response or an - asyncronous event. */ - - unsigned char __user *addr; /* Address the message was from is put - here. The caller must supply the - memory. */ - unsigned int addr_len; /* The size of the address buffer. - The caller supplies the full buffer - length, this value is updated to - the actual message length when the - message is received. */ - - long msgid; /* The sequence number specified in the request - if this is a response. If this is a command, - this will be the sequence number from the - command. */ - - struct ipmi_msg msg; /* The data field must point to a buffer. - The data_size field must be set to the - size of the message buffer. The - caller supplies the full buffer - length, this value is updated to the - actual message length when the message - is received. */ -}; - -/* - * Receive a message. error values: - * - EAGAIN - no messages in the queue. - * - EFAULT - an address supplied was invalid. - * - EINVAL - The address supplied was not valid. - * - EMSGSIZE - The message to was too large to fit into the message buffer, - * the message will be left in the buffer. */ -#define IPMICTL_RECEIVE_MSG _IOWR(IPMI_IOC_MAGIC, 12, \ - struct ipmi_recv) - -/* - * Like RECEIVE_MSG, but if the message won't fit in the buffer, it - * will truncate the contents instead of leaving the data in the - * buffer. - */ -#define IPMICTL_RECEIVE_MSG_TRUNC _IOWR(IPMI_IOC_MAGIC, 11, \ - struct ipmi_recv) - -/* Register to get commands from other entities on this interface. */ -struct ipmi_cmdspec { - unsigned char netfn; - unsigned char cmd; -}; - -/* - * Register to receive a specific command. error values: - * - EFAULT - an address supplied was invalid. - * - EBUSY - The netfn/cmd supplied was already in use. - * - ENOMEM - could not allocate memory for the entry. - */ -#define IPMICTL_REGISTER_FOR_CMD _IOR(IPMI_IOC_MAGIC, 14, \ - struct ipmi_cmdspec) -/* - * Unregister a regsitered command. error values: - * - EFAULT - an address supplied was invalid. - * - ENOENT - The netfn/cmd was not found registered for this user. - */ -#define IPMICTL_UNREGISTER_FOR_CMD _IOR(IPMI_IOC_MAGIC, 15, \ - struct ipmi_cmdspec) - -/* - * Register to get commands from other entities on specific channels. - * This way, you can only listen on specific channels, or have messages - * from some channels go to one place and other channels to someplace - * else. The chans field is a bitmask, (1 << channel) for each channel. - * It may be IPMI_CHAN_ALL for all channels. - */ -struct ipmi_cmdspec_chans { - unsigned int netfn; - unsigned int cmd; - unsigned int chans; -}; - -/* - * Register to receive a specific command on specific channels. error values: - * - EFAULT - an address supplied was invalid. - * - EBUSY - One of the netfn/cmd/chans supplied was already in use. - * - ENOMEM - could not allocate memory for the entry. - */ -#define IPMICTL_REGISTER_FOR_CMD_CHANS _IOR(IPMI_IOC_MAGIC, 28, \ - struct ipmi_cmdspec_chans) -/* - * Unregister some netfn/cmd/chans. error values: - * - EFAULT - an address supplied was invalid. - * - ENOENT - None of the netfn/cmd/chans were found registered for this user. - */ -#define IPMICTL_UNREGISTER_FOR_CMD_CHANS _IOR(IPMI_IOC_MAGIC, 29, \ - struct ipmi_cmdspec_chans) - -/* - * Set whether this interface receives events. Note that the first - * user registered for events will get all pending events for the - * interface. error values: - * - EFAULT - an address supplied was invalid. - */ -#define IPMICTL_SET_GETS_EVENTS_CMD _IOR(IPMI_IOC_MAGIC, 16, int) - -/* - * Set and get the slave address and LUN that we will use for our - * source messages. Note that this affects the interface, not just - * this user, so it will affect all users of this interface. This is - * so some initialization code can come in and do the OEM-specific - * things it takes to determine your address (if not the BMC) and set - * it for everyone else. You should probably leave the LUN alone. - */ -struct ipmi_channel_lun_address_set { - unsigned short channel; - unsigned char value; -}; -#define IPMICTL_SET_MY_CHANNEL_ADDRESS_CMD \ - _IOR(IPMI_IOC_MAGIC, 24, struct ipmi_channel_lun_address_set) -#define IPMICTL_GET_MY_CHANNEL_ADDRESS_CMD \ - _IOR(IPMI_IOC_MAGIC, 25, struct ipmi_channel_lun_address_set) -#define IPMICTL_SET_MY_CHANNEL_LUN_CMD \ - _IOR(IPMI_IOC_MAGIC, 26, struct ipmi_channel_lun_address_set) -#define IPMICTL_GET_MY_CHANNEL_LUN_CMD \ - _IOR(IPMI_IOC_MAGIC, 27, struct ipmi_channel_lun_address_set) -/* Legacy interfaces, these only set IPMB 0. */ -#define IPMICTL_SET_MY_ADDRESS_CMD _IOR(IPMI_IOC_MAGIC, 17, unsigned int) -#define IPMICTL_GET_MY_ADDRESS_CMD _IOR(IPMI_IOC_MAGIC, 18, unsigned int) -#define IPMICTL_SET_MY_LUN_CMD _IOR(IPMI_IOC_MAGIC, 19, unsigned int) -#define IPMICTL_GET_MY_LUN_CMD _IOR(IPMI_IOC_MAGIC, 20, unsigned int) - -/* - * Get/set the default timing values for an interface. You shouldn't - * generally mess with these. - */ -struct ipmi_timing_parms { - int retries; - unsigned int retry_time_ms; -}; -#define IPMICTL_SET_TIMING_PARMS_CMD _IOR(IPMI_IOC_MAGIC, 22, \ - struct ipmi_timing_parms) -#define IPMICTL_GET_TIMING_PARMS_CMD _IOR(IPMI_IOC_MAGIC, 23, \ - struct ipmi_timing_parms) - -/* - * Set the maintenance mode. See ipmi_set_maintenance_mode() above - * for a description of what this does. - */ -#define IPMICTL_GET_MAINTENANCE_MODE_CMD _IOR(IPMI_IOC_MAGIC, 30, int) -#define IPMICTL_SET_MAINTENANCE_MODE_CMD _IOW(IPMI_IOC_MAGIC, 31, int) - #endif /* __LINUX_IPMI_H */ diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h index 0b94e91ed68..bcba48a9786 100644 --- a/include/linux/ipv6.h +++ b/include/linux/ipv6.h @@ -1,134 +1,9 @@ #ifndef _IPV6_H #define _IPV6_H -#include <linux/types.h> -#include <linux/in6.h> -#include <asm/byteorder.h> +#include <uapi/linux/ipv6.h> -/* The latest drafts declared increase in minimal mtu up to 1280. */ - -#define IPV6_MIN_MTU 1280 - -/* - * Advanced API - * source interface/address selection, source routing, etc... - * *under construction* - */ - - -struct in6_pktinfo { - struct in6_addr ipi6_addr; - int ipi6_ifindex; -}; - -struct ip6_mtuinfo { - struct sockaddr_in6 ip6m_addr; - __u32 ip6m_mtu; -}; - -struct in6_ifreq { - struct in6_addr ifr6_addr; - __u32 ifr6_prefixlen; - int ifr6_ifindex; -}; - -#define IPV6_SRCRT_STRICT 0x01 /* Deprecated; will be removed */ -#define IPV6_SRCRT_TYPE_0 0 /* Deprecated; will be removed */ -#define IPV6_SRCRT_TYPE_2 2 /* IPv6 type 2 Routing Header */ - -/* - * routing header - */ -struct ipv6_rt_hdr { - __u8 nexthdr; - __u8 hdrlen; - __u8 type; - __u8 segments_left; - - /* - * type specific data - * variable length field - */ -}; - - -struct ipv6_opt_hdr { - __u8 nexthdr; - __u8 hdrlen; - /* - * TLV encoded option data follows. - */ -} __attribute__((packed)); /* required for some archs */ - -#define ipv6_destopt_hdr ipv6_opt_hdr -#define ipv6_hopopt_hdr ipv6_opt_hdr - -#ifdef __KERNEL__ #define ipv6_optlen(p) (((p)->hdrlen+1) << 3) -#endif - -/* - * routing header type 0 (used in cmsghdr struct) - */ - -struct rt0_hdr { - struct ipv6_rt_hdr rt_hdr; - __u32 reserved; - struct in6_addr addr[0]; - -#define rt0_type rt_hdr.type -}; - -/* - * routing header type 2 - */ - -struct rt2_hdr { - struct ipv6_rt_hdr rt_hdr; - __u32 reserved; - struct in6_addr addr; - -#define rt2_type rt_hdr.type -}; - -/* - * home address option in destination options header - */ - -struct ipv6_destopt_hao { - __u8 type; - __u8 length; - struct in6_addr addr; -} __attribute__((packed)); - -/* - * IPv6 fixed header - * - * BEWARE, it is incorrect. The first 4 bits of flow_lbl - * are glued to priority now, forming "class". - */ - -struct ipv6hdr { -#if defined(__LITTLE_ENDIAN_BITFIELD) - __u8 priority:4, - version:4; -#elif defined(__BIG_ENDIAN_BITFIELD) - __u8 version:4, - priority:4; -#else -#error "Please fix <asm/byteorder.h>" -#endif - __u8 flow_lbl[3]; - - __be16 payload_len; - __u8 nexthdr; - __u8 hop_limit; - - struct in6_addr saddr; - struct in6_addr daddr; -}; - -#ifdef __KERNEL__ /* * This structure contains configuration options per IPv6 link. */ @@ -180,43 +55,6 @@ struct ipv6_params { __s32 autoconf; }; extern struct ipv6_params ipv6_defaults; -#endif - -/* index values for the variables in ipv6_devconf */ -enum { - DEVCONF_FORWARDING = 0, - DEVCONF_HOPLIMIT, - DEVCONF_MTU6, - DEVCONF_ACCEPT_RA, - DEVCONF_ACCEPT_REDIRECTS, - DEVCONF_AUTOCONF, - DEVCONF_DAD_TRANSMITS, - DEVCONF_RTR_SOLICITS, - DEVCONF_RTR_SOLICIT_INTERVAL, - DEVCONF_RTR_SOLICIT_DELAY, - DEVCONF_USE_TEMPADDR, - DEVCONF_TEMP_VALID_LFT, - DEVCONF_TEMP_PREFERED_LFT, - DEVCONF_REGEN_MAX_RETRY, - DEVCONF_MAX_DESYNC_FACTOR, - DEVCONF_MAX_ADDRESSES, - DEVCONF_FORCE_MLD_VERSION, - DEVCONF_ACCEPT_RA_DEFRTR, - DEVCONF_ACCEPT_RA_PINFO, - DEVCONF_ACCEPT_RA_RTR_PREF, - DEVCONF_RTR_PROBE_INTERVAL, - DEVCONF_ACCEPT_RA_RT_INFO_MAX_PLEN, - DEVCONF_PROXY_NDP, - DEVCONF_OPTIMISTIC_DAD, - DEVCONF_ACCEPT_SOURCE_ROUTE, - DEVCONF_MC_FORWARDING, - DEVCONF_DISABLE_IPV6, - DEVCONF_ACCEPT_DAD, - DEVCONF_FORCE_TLLAO, - DEVCONF_MAX -}; - -#ifdef __KERNEL__ #include <linux/icmpv6.h> #include <linux/tcp.h> #include <linux/udp.h> @@ -541,6 +379,4 @@ static inline struct raw6_sock *raw6_sk(const struct sock *sk) (ipv6_addr_equal(&inet6_twsk(__sk)->tw_v6_rcv_saddr, (__daddr))) && \ (!((__sk)->sk_bound_dev_if) || ((__sk)->sk_bound_dev_if == (__dif)))) -#endif /* __KERNEL__ */ - #endif /* _IPV6_H */ diff --git a/include/linux/ipv6_route.h b/include/linux/ipv6_route.h index 1e7d8af2def..25b5f1f5e78 100644 --- a/include/linux/ipv6_route.h +++ b/include/linux/ipv6_route.h @@ -9,54 +9,11 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ - #ifndef _LINUX_IPV6_ROUTE_H #define _LINUX_IPV6_ROUTE_H -#include <linux/types.h> - -#define RTF_DEFAULT 0x00010000 /* default - learned via ND */ -#define RTF_ALLONLINK 0x00020000 /* (deprecated and will be removed) - fallback, no routers on link */ -#define RTF_ADDRCONF 0x00040000 /* addrconf route - RA */ -#define RTF_PREFIX_RT 0x00080000 /* A prefix only route - RA */ -#define RTF_ANYCAST 0x00100000 /* Anycast */ - -#define RTF_NONEXTHOP 0x00200000 /* route with no nexthop */ -#define RTF_EXPIRES 0x00400000 - -#define RTF_ROUTEINFO 0x00800000 /* route information - RA */ - -#define RTF_CACHE 0x01000000 /* cache entry */ -#define RTF_FLOW 0x02000000 /* flow significant route */ -#define RTF_POLICY 0x04000000 /* policy route */ - -#define RTF_PREF(pref) ((pref) << 27) -#define RTF_PREF_MASK 0x18000000 +#include <uapi/linux/ipv6_route.h> -#define RTF_LOCAL 0x80000000 - -#ifdef __KERNEL__ #define IPV6_EXTRACT_PREF(flag) (((flag) & RTF_PREF_MASK) >> 27) #define IPV6_DECODE_PREF(pref) ((pref) ^ 2) /* 1:low,2:med,3:high */ #endif - -struct in6_rtmsg { - struct in6_addr rtmsg_dst; - struct in6_addr rtmsg_src; - struct in6_addr rtmsg_gateway; - __u32 rtmsg_type; - __u16 rtmsg_dst_len; - __u16 rtmsg_src_len; - __u32 rtmsg_metric; - unsigned long rtmsg_info; - __u32 rtmsg_flags; - int rtmsg_ifindex; -}; - -#define RTMSG_NEWDEVICE 0x11 -#define RTMSG_DELDEVICE 0x12 -#define RTMSG_NEWROUTE 0x21 -#define RTMSG_DELROUTE 0x22 - -#endif diff --git a/include/linux/irqnr.h b/include/linux/irqnr.h index 3bc4dcab6e8..0a2dc46cdaf 100644 --- a/include/linux/irqnr.h +++ b/include/linux/irqnr.h @@ -1,10 +1,8 @@ #ifndef _LINUX_IRQNR_H #define _LINUX_IRQNR_H -/* - * Generic irq_desc iterators: - */ -#ifdef __KERNEL__ +#include <uapi/linux/irqnr.h> + #ifndef CONFIG_GENERIC_HARDIRQS #include <asm/irq.h> @@ -57,6 +55,4 @@ unsigned int irq_get_next_irq(unsigned int offset); #define for_each_irq_nr(irq) \ for (irq = 0; irq < nr_irqs; irq++) -#endif /* __KERNEL__ */ - #endif diff --git a/include/linux/isdn.h b/include/linux/isdn.h index 215c41602af..1e9a0f2a862 100644 --- a/include/linux/isdn.h +++ b/include/linux/isdn.h @@ -10,136 +10,9 @@ * of the GNU General Public License, incorporated herein by reference. * */ - #ifndef __ISDN_H__ #define __ISDN_H__ -#include <linux/ioctl.h> -#include <linux/tty.h> - -#define ISDN_MAX_DRIVERS 32 -#define ISDN_MAX_CHANNELS 64 - -/* New ioctl-codes */ -#define IIOCNETAIF _IO('I',1) -#define IIOCNETDIF _IO('I',2) -#define IIOCNETSCF _IO('I',3) -#define IIOCNETGCF _IO('I',4) -#define IIOCNETANM _IO('I',5) -#define IIOCNETDNM _IO('I',6) -#define IIOCNETGNM _IO('I',7) -#define IIOCGETSET _IO('I',8) /* no longer supported */ -#define IIOCSETSET _IO('I',9) /* no longer supported */ -#define IIOCSETVER _IO('I',10) -#define IIOCNETHUP _IO('I',11) -#define IIOCSETGST _IO('I',12) -#define IIOCSETBRJ _IO('I',13) -#define IIOCSIGPRF _IO('I',14) -#define IIOCGETPRF _IO('I',15) -#define IIOCSETPRF _IO('I',16) -#define IIOCGETMAP _IO('I',17) -#define IIOCSETMAP _IO('I',18) -#define IIOCNETASL _IO('I',19) -#define IIOCNETDIL _IO('I',20) -#define IIOCGETCPS _IO('I',21) -#define IIOCGETDVR _IO('I',22) -#define IIOCNETLCR _IO('I',23) /* dwabc ioctl for LCR from isdnlog */ -#define IIOCNETDWRSET _IO('I',24) /* dwabc ioctl to reset abc-values to default on a net-interface */ - -#define IIOCNETALN _IO('I',32) -#define IIOCNETDLN _IO('I',33) - -#define IIOCNETGPN _IO('I',34) - -#define IIOCDBGVAR _IO('I',127) - -#define IIOCDRVCTL _IO('I',128) - -/* cisco hdlck device private ioctls */ -#define SIOCGKEEPPERIOD (SIOCDEVPRIVATE + 0) -#define SIOCSKEEPPERIOD (SIOCDEVPRIVATE + 1) -#define SIOCGDEBSERINT (SIOCDEVPRIVATE + 2) -#define SIOCSDEBSERINT (SIOCDEVPRIVATE + 3) - -/* Packet encapsulations for net-interfaces */ -#define ISDN_NET_ENCAP_ETHER 0 -#define ISDN_NET_ENCAP_RAWIP 1 -#define ISDN_NET_ENCAP_IPTYP 2 -#define ISDN_NET_ENCAP_CISCOHDLC 3 /* Without SLARP and keepalive */ -#define ISDN_NET_ENCAP_SYNCPPP 4 -#define ISDN_NET_ENCAP_UIHDLC 5 -#define ISDN_NET_ENCAP_CISCOHDLCK 6 /* With SLARP and keepalive */ -#define ISDN_NET_ENCAP_X25IFACE 7 /* Documentation/networking/x25-iface.txt */ -#define ISDN_NET_ENCAP_MAX_ENCAP ISDN_NET_ENCAP_X25IFACE - -/* Facility which currently uses an ISDN-channel */ -#define ISDN_USAGE_NONE 0 -#define ISDN_USAGE_RAW 1 -#define ISDN_USAGE_MODEM 2 -#define ISDN_USAGE_NET 3 -#define ISDN_USAGE_VOICE 4 -#define ISDN_USAGE_FAX 5 -#define ISDN_USAGE_MASK 7 /* Mask to get plain usage */ -#define ISDN_USAGE_DISABLED 32 /* This bit is set, if channel is disabled */ -#define ISDN_USAGE_EXCLUSIVE 64 /* This bit is set, if channel is exclusive */ -#define ISDN_USAGE_OUTGOING 128 /* This bit is set, if channel is outgoing */ - -#define ISDN_MODEM_NUMREG 24 /* Number of Modem-Registers */ -#define ISDN_LMSNLEN 255 /* Length of tty's Listen-MSN string */ -#define ISDN_CMSGLEN 50 /* Length of CONNECT-Message to add for Modem */ - -#define ISDN_MSNLEN 32 -#define NET_DV 0x06 /* Data version for isdn_net_ioctl_cfg */ -#define TTY_DV 0x06 /* Data version for iprofd etc. */ - -#define INF_DV 0x01 /* Data version for /dev/isdninfo */ - -typedef struct { - char drvid[25]; - unsigned long arg; -} isdn_ioctl_struct; - -typedef struct { - char name[10]; - char phone[ISDN_MSNLEN]; - int outgoing; -} isdn_net_ioctl_phone; - -typedef struct { - char name[10]; /* Name of interface */ - char master[10]; /* Name of Master for Bundling */ - char slave[10]; /* Name of Slave for Bundling */ - char eaz[256]; /* EAZ/MSN */ - char drvid[25]; /* DriverId for Bindings */ - int onhtime; /* Hangup-Timeout */ - int charge; /* Charge-Units */ - int l2_proto; /* Layer-2 protocol */ - int l3_proto; /* Layer-3 protocol */ - int p_encap; /* Encapsulation */ - int exclusive; /* Channel, if bound exclusive */ - int dialmax; /* Dial Retry-Counter */ - int slavedelay; /* Delay until slave starts up */ - int cbdelay; /* Delay before Callback */ - int chargehup; /* Flag: Charge-Hangup */ - int ihup; /* Flag: Hangup-Timeout on incoming line */ - int secure; /* Flag: Secure */ - int callback; /* Flag: Callback */ - int cbhup; /* Flag: Reject Call before Callback */ - int pppbind; /* ippp device for bindings */ - int chargeint; /* Use fixed charge interval length */ - int triggercps; /* BogoCPS needed for triggering slave */ - int dialtimeout; /* Dial-Timeout */ - int dialwait; /* Time to wait after failed dial */ - int dialmode; /* Flag: off / on / auto */ -} isdn_net_ioctl_cfg; - -#define ISDN_NET_DIALMODE_MASK 0xC0 /* bits for status */ -#define ISDN_NET_DM_OFF 0x00 /* this interface is stopped */ -#define ISDN_NET_DM_MANUAL 0x40 /* this interface is on (manual) */ -#define ISDN_NET_DM_AUTO 0x80 /* this interface is autodial */ -#define ISDN_NET_DIALMODE(x) ((&(x))->flags & ISDN_NET_DIALMODE_MASK) - -#ifdef __KERNEL__ #include <linux/errno.h> #include <linux/fs.h> @@ -163,6 +36,7 @@ typedef struct { #include <linux/skbuff.h> #include <linux/tcp.h> #include <linux/mutex.h> +#include <uapi/linux/isdn.h> #define ISDN_TTY_MAJOR 43 #define ISDN_TTYAUX_MAJOR 44 @@ -595,6 +469,4 @@ typedef struct isdn_devt { extern isdn_dev *dev; -#endif /* __KERNEL__ */ - #endif /* __ISDN_H__ */ diff --git a/include/linux/isdn_divertif.h b/include/linux/isdn_divertif.h index a5a50f52380..19ab361f9f0 100644 --- a/include/linux/isdn_divertif.h +++ b/include/linux/isdn_divertif.h @@ -9,26 +9,12 @@ * of the GNU General Public License, incorporated herein by reference. * */ - #ifndef _LINUX_ISDN_DIVERTIF_H #define _LINUX_ISDN_DIVERTIF_H -/***********************************************************/ -/* magic value is also used to control version information */ -/***********************************************************/ -#define DIVERT_IF_MAGIC 0x25873401 -#define DIVERT_CMD_REG 0x00 /* register command */ -#define DIVERT_CMD_REL 0x01 /* release command */ -#define DIVERT_NO_ERR 0x00 /* return value no error */ -#define DIVERT_CMD_ERR 0x01 /* invalid cmd */ -#define DIVERT_VER_ERR 0x02 /* magic/version invalid */ -#define DIVERT_REG_ERR 0x03 /* module already registered */ -#define DIVERT_REL_ERR 0x04 /* module not registered */ -#define DIVERT_REG_NAME isdn_register_divert - -#ifdef __KERNEL__ #include <linux/isdnif.h> #include <linux/types.h> +#include <uapi/linux/isdn_divertif.h> /***************************************************************/ /* structure exchanging data between isdn hl and divert module */ @@ -46,6 +32,4 @@ typedef struct /* function register */ /*********************/ extern int DIVERT_REG_NAME(isdn_divert_if *); -#endif - #endif /* _LINUX_ISDN_DIVERTIF_H */ diff --git a/include/linux/isdn_ppp.h b/include/linux/isdn_ppp.h index 8687a7dc063..d5f62bc5f4b 100644 --- a/include/linux/isdn_ppp.h +++ b/include/linux/isdn_ppp.h @@ -9,68 +9,16 @@ * of the GNU General Public License, incorporated herein by reference. * */ - #ifndef _LINUX_ISDN_PPP_H #define _LINUX_ISDN_PPP_H -#define CALLTYPE_INCOMING 0x1 -#define CALLTYPE_OUTGOING 0x2 -#define CALLTYPE_CALLBACK 0x4 - -#define IPPP_VERSION "2.2.0" - -struct pppcallinfo -{ - int calltype; - unsigned char local_num[64]; - unsigned char remote_num[64]; - int charge_units; -}; - -#define PPPIOCGCALLINFO _IOWR('t',128,struct pppcallinfo) -#define PPPIOCBUNDLE _IOW('t',129,int) -#define PPPIOCGMPFLAGS _IOR('t',130,int) -#define PPPIOCSMPFLAGS _IOW('t',131,int) -#define PPPIOCSMPMTU _IOW('t',132,int) -#define PPPIOCSMPMRU _IOW('t',133,int) -#define PPPIOCGCOMPRESSORS _IOR('t',134,unsigned long [8]) -#define PPPIOCSCOMPRESSOR _IOW('t',135,int) -#define PPPIOCGIFNAME _IOR('t',136, char [IFNAMSIZ] ) - - -#define SC_MP_PROT 0x00000200 -#define SC_REJ_MP_PROT 0x00000400 -#define SC_OUT_SHORT_SEQ 0x00000800 -#define SC_IN_SHORT_SEQ 0x00004000 - -#define SC_DECOMP_ON 0x01 -#define SC_COMP_ON 0x02 -#define SC_DECOMP_DISCARD 0x04 -#define SC_COMP_DISCARD 0x08 -#define SC_LINK_DECOMP_ON 0x10 -#define SC_LINK_COMP_ON 0x20 -#define SC_LINK_DECOMP_DISCARD 0x40 -#define SC_LINK_COMP_DISCARD 0x80 - -#define ISDN_PPP_COMP_MAX_OPTIONS 16 - -#define IPPP_COMP_FLAG_XMIT 0x1 -#define IPPP_COMP_FLAG_LINK 0x2 - -struct isdn_ppp_comp_data { - int num; - unsigned char options[ISDN_PPP_COMP_MAX_OPTIONS]; - int optlen; - int flags; -}; - -#ifdef __KERNEL__ #ifdef CONFIG_IPPP_FILTER #include <linux/filter.h> #endif +#include <uapi/linux/isdn_ppp.h> #define DECOMP_ERR_NOMEM (-10) @@ -244,5 +192,4 @@ struct ippp_struct { unsigned long compflags; }; -#endif /* __KERNEL__ */ #endif /* _LINUX_ISDN_PPP_H */ diff --git a/include/linux/isdnif.h b/include/linux/isdnif.h index b8c23f88dd5..0fc6ff27622 100644 --- a/include/linux/isdnif.h +++ b/include/linux/isdnif.h @@ -10,51 +10,12 @@ * of the GNU General Public License, incorporated herein by reference. * */ - #ifndef __ISDNIF_H__ #define __ISDNIF_H__ -/* - * Values for general protocol-selection - */ -#define ISDN_PTYPE_UNKNOWN 0 /* Protocol undefined */ -#define ISDN_PTYPE_1TR6 1 /* german 1TR6-protocol */ -#define ISDN_PTYPE_EURO 2 /* EDSS1-protocol */ -#define ISDN_PTYPE_LEASED 3 /* for leased lines */ -#define ISDN_PTYPE_NI1 4 /* US NI-1 protocol */ -#define ISDN_PTYPE_MAX 7 /* Max. 8 Protocols */ - -/* - * Values for Layer-2-protocol-selection - */ -#define ISDN_PROTO_L2_X75I 0 /* X75/LAPB with I-Frames */ -#define ISDN_PROTO_L2_X75UI 1 /* X75/LAPB with UI-Frames */ -#define ISDN_PROTO_L2_X75BUI 2 /* X75/LAPB with UI-Frames */ -#define ISDN_PROTO_L2_HDLC 3 /* HDLC */ -#define ISDN_PROTO_L2_TRANS 4 /* Transparent (Voice) */ -#define ISDN_PROTO_L2_X25DTE 5 /* X25/LAPB DTE mode */ -#define ISDN_PROTO_L2_X25DCE 6 /* X25/LAPB DCE mode */ -#define ISDN_PROTO_L2_V11096 7 /* V.110 bitrate adaption 9600 Baud */ -#define ISDN_PROTO_L2_V11019 8 /* V.110 bitrate adaption 19200 Baud */ -#define ISDN_PROTO_L2_V11038 9 /* V.110 bitrate adaption 38400 Baud */ -#define ISDN_PROTO_L2_MODEM 10 /* Analog Modem on Board */ -#define ISDN_PROTO_L2_FAX 11 /* Fax Group 2/3 */ -#define ISDN_PROTO_L2_HDLC_56K 12 /* HDLC 56k */ -#define ISDN_PROTO_L2_MAX 15 /* Max. 16 Protocols */ - -/* - * Values for Layer-3-protocol-selection - */ -#define ISDN_PROTO_L3_TRANS 0 /* Transparent */ -#define ISDN_PROTO_L3_TRANSDSP 1 /* Transparent with DSP */ -#define ISDN_PROTO_L3_FCLASS2 2 /* Fax Group 2/3 CLASS 2 */ -#define ISDN_PROTO_L3_FCLASS1 3 /* Fax Group 2/3 CLASS 1 */ -#define ISDN_PROTO_L3_MAX 7 /* Max. 8 Protocols */ - -#ifdef __KERNEL__ - #include <linux/skbuff.h> +#include <uapi/linux/isdnif.h> /***************************************************************************/ /* Extensions made by Werner Cornelius (werner@ikt.de) */ @@ -541,6 +502,4 @@ typedef struct { extern int register_isdn(isdn_if*); #include <asm/uaccess.h> -#endif /* __KERNEL__ */ - #endif /* __ISDNIF_H__ */ diff --git a/include/linux/jiffies.h b/include/linux/jiffies.h index 05e3c2c7a8c..6b87413da9d 100644 --- a/include/linux/jiffies.h +++ b/include/linux/jiffies.h @@ -51,31 +51,17 @@ #define SH_DIV(NOM,DEN,LSH) ( (((NOM) / (DEN)) << (LSH)) \ + ((((NOM) % (DEN)) << (LSH)) + (DEN) / 2) / (DEN)) -#ifdef CLOCK_TICK_RATE /* LATCH is used in the interval timer and ftape setup. */ -# define LATCH ((CLOCK_TICK_RATE + HZ/2) / HZ) /* For divider */ +#define LATCH ((CLOCK_TICK_RATE + HZ/2) / HZ) /* For divider */ -/* - * HZ is the requested value. However the CLOCK_TICK_RATE may not allow - * for exactly HZ. So SHIFTED_HZ is high res HZ ("<< 8" is for accuracy) - */ -# define SHIFTED_HZ (SH_DIV(CLOCK_TICK_RATE, LATCH, 8)) -#else -# define SHIFTED_HZ (HZ << 8) -#endif +extern int register_refined_jiffies(long clock_tick_rate); /* TICK_NSEC is the time between ticks in nsec assuming SHIFTED_HZ */ -#define TICK_NSEC (SH_DIV(1000000UL * 1000, SHIFTED_HZ, 8)) +#define TICK_NSEC ((NSEC_PER_SEC+HZ/2)/HZ) /* TICK_USEC is the time between ticks in usec assuming fake USER_HZ */ #define TICK_USEC ((1000000UL + USER_HZ/2) / USER_HZ) -/* - * TICK_USEC_TO_NSEC is the time between ticks in nsec assuming SHIFTED_HZ and - * a value TUSEC for TICK_USEC (can be set bij adjtimex) - */ -#define TICK_USEC_TO_NSEC(TUSEC) (SH_DIV(TUSEC * USER_HZ * 1000, SHIFTED_HZ, 8)) - /* some arch's have a small-data section that can be accessed register-relative * but that can only take up to, say, 4-byte variables. jiffies being part of * an 8-byte variable may not be correctly accessed unless we force the issue diff --git a/include/linux/joystick.h b/include/linux/joystick.h index 47199b13e0e..cbf2aa9e93b 100644 --- a/include/linux/joystick.h +++ b/include/linux/joystick.h @@ -1,12 +1,8 @@ -#ifndef _LINUX_JOYSTICK_H -#define _LINUX_JOYSTICK_H - /* * Copyright (C) 1996-2000 Vojtech Pavlik * * Sponsored by SuSE */ - /* * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -26,113 +22,11 @@ * e-mail - mail your message to <vojtech@suse.cz>, or by paper mail: * Vojtech Pavlik, Ucitelska 1576, Prague 8, 182 00 Czech Republic */ +#ifndef _LINUX_JOYSTICK_H +#define _LINUX_JOYSTICK_H -#include <linux/types.h> -#include <linux/input.h> - -/* - * Version - */ - -#define JS_VERSION 0x020100 - -/* - * Types and constants for reading from /dev/js - */ - -#define JS_EVENT_BUTTON 0x01 /* button pressed/released */ -#define JS_EVENT_AXIS 0x02 /* joystick moved */ -#define JS_EVENT_INIT 0x80 /* initial state of device */ - -struct js_event { - __u32 time; /* event timestamp in milliseconds */ - __s16 value; /* value */ - __u8 type; /* event type */ - __u8 number; /* axis/button number */ -}; - -/* - * IOCTL commands for joystick driver - */ - -#define JSIOCGVERSION _IOR('j', 0x01, __u32) /* get driver version */ - -#define JSIOCGAXES _IOR('j', 0x11, __u8) /* get number of axes */ -#define JSIOCGBUTTONS _IOR('j', 0x12, __u8) /* get number of buttons */ -#define JSIOCGNAME(len) _IOC(_IOC_READ, 'j', 0x13, len) /* get identifier string */ - -#define JSIOCSCORR _IOW('j', 0x21, struct js_corr) /* set correction values */ -#define JSIOCGCORR _IOR('j', 0x22, struct js_corr) /* get correction values */ - -#define JSIOCSAXMAP _IOW('j', 0x31, __u8[ABS_CNT]) /* set axis mapping */ -#define JSIOCGAXMAP _IOR('j', 0x32, __u8[ABS_CNT]) /* get axis mapping */ -#define JSIOCSBTNMAP _IOW('j', 0x33, __u16[KEY_MAX - BTN_MISC + 1]) /* set button mapping */ -#define JSIOCGBTNMAP _IOR('j', 0x34, __u16[KEY_MAX - BTN_MISC + 1]) /* get button mapping */ - -/* - * Types and constants for get/set correction - */ - -#define JS_CORR_NONE 0x00 /* returns raw values */ -#define JS_CORR_BROKEN 0x01 /* broken line */ - -struct js_corr { - __s32 coef[8]; - __s16 prec; - __u16 type; -}; - -/* - * v0.x compatibility definitions - */ - -#define JS_RETURN sizeof(struct JS_DATA_TYPE) -#define JS_TRUE 1 -#define JS_FALSE 0 -#define JS_X_0 0x01 -#define JS_Y_0 0x02 -#define JS_X_1 0x04 -#define JS_Y_1 0x08 -#define JS_MAX 2 - -#define JS_DEF_TIMEOUT 0x1300 -#define JS_DEF_CORR 0 -#define JS_DEF_TIMELIMIT 10L - -#define JS_SET_CAL 1 -#define JS_GET_CAL 2 -#define JS_SET_TIMEOUT 3 -#define JS_GET_TIMEOUT 4 -#define JS_SET_TIMELIMIT 5 -#define JS_GET_TIMELIMIT 6 -#define JS_GET_ALL 7 -#define JS_SET_ALL 8 - -struct JS_DATA_TYPE { - __s32 buttons; - __s32 x; - __s32 y; -}; - -struct JS_DATA_SAVE_TYPE_32 { - __s32 JS_TIMEOUT; - __s32 BUSY; - __s32 JS_EXPIRETIME; - __s32 JS_TIMELIMIT; - struct JS_DATA_TYPE JS_SAVE; - struct JS_DATA_TYPE JS_CORR; -}; - -struct JS_DATA_SAVE_TYPE_64 { - __s32 JS_TIMEOUT; - __s32 BUSY; - __s64 JS_EXPIRETIME; - __s64 JS_TIMELIMIT; - struct JS_DATA_TYPE JS_SAVE; - struct JS_DATA_TYPE JS_CORR; -}; +#include <uapi/linux/joystick.h> -#ifdef __KERNEL__ #if BITS_PER_LONG == 64 #define JS_DATA_SAVE_TYPE JS_DATA_SAVE_TYPE_64 #elif BITS_PER_LONG == 32 @@ -140,6 +34,4 @@ struct JS_DATA_SAVE_TYPE_64 { #else #error Unexpected BITS_PER_LONG #endif -#endif - #endif /* _LINUX_JOYSTICK_H */ diff --git a/include/linux/kd.h b/include/linux/kd.h index c36d8476db5..25bd17fad23 100644 --- a/include/linux/kd.h +++ b/include/linux/kd.h @@ -1,186 +1,7 @@ #ifndef _LINUX_KD_H #define _LINUX_KD_H -#include <linux/types.h> -#include <linux/compiler.h> -/* 0x4B is 'K', to avoid collision with termios and vt */ +#include <uapi/linux/kd.h> -#define GIO_FONT 0x4B60 /* gets font in expanded form */ -#define PIO_FONT 0x4B61 /* use font in expanded form */ - -#define GIO_FONTX 0x4B6B /* get font using struct consolefontdesc */ -#define PIO_FONTX 0x4B6C /* set font using struct consolefontdesc */ -struct consolefontdesc { - unsigned short charcount; /* characters in font (256 or 512) */ - unsigned short charheight; /* scan lines per character (1-32) */ - char __user *chardata; /* font data in expanded form */ -}; - -#define PIO_FONTRESET 0x4B6D /* reset to default font */ - -#define GIO_CMAP 0x4B70 /* gets colour palette on VGA+ */ -#define PIO_CMAP 0x4B71 /* sets colour palette on VGA+ */ - -#define KIOCSOUND 0x4B2F /* start sound generation (0 for off) */ -#define KDMKTONE 0x4B30 /* generate tone */ - -#define KDGETLED 0x4B31 /* return current led state */ -#define KDSETLED 0x4B32 /* set led state [lights, not flags] */ -#define LED_SCR 0x01 /* scroll lock led */ -#define LED_NUM 0x02 /* num lock led */ -#define LED_CAP 0x04 /* caps lock led */ - -#define KDGKBTYPE 0x4B33 /* get keyboard type */ -#define KB_84 0x01 -#define KB_101 0x02 /* this is what we always answer */ -#define KB_OTHER 0x03 - -#define KDADDIO 0x4B34 /* add i/o port as valid */ -#define KDDELIO 0x4B35 /* del i/o port as valid */ -#define KDENABIO 0x4B36 /* enable i/o to video board */ -#define KDDISABIO 0x4B37 /* disable i/o to video board */ - -#define KDSETMODE 0x4B3A /* set text/graphics mode */ -#define KD_TEXT 0x00 -#define KD_GRAPHICS 0x01 -#define KD_TEXT0 0x02 /* obsolete */ -#define KD_TEXT1 0x03 /* obsolete */ -#define KDGETMODE 0x4B3B /* get current mode */ - -#define KDMAPDISP 0x4B3C /* map display into address space */ -#define KDUNMAPDISP 0x4B3D /* unmap display from address space */ - -typedef char scrnmap_t; -#define E_TABSZ 256 -#define GIO_SCRNMAP 0x4B40 /* get screen mapping from kernel */ -#define PIO_SCRNMAP 0x4B41 /* put screen mapping table in kernel */ -#define GIO_UNISCRNMAP 0x4B69 /* get full Unicode screen mapping */ -#define PIO_UNISCRNMAP 0x4B6A /* set full Unicode screen mapping */ - -#define GIO_UNIMAP 0x4B66 /* get unicode-to-font mapping from kernel */ -struct unipair { - unsigned short unicode; - unsigned short fontpos; -}; -struct unimapdesc { - unsigned short entry_ct; - struct unipair __user *entries; -}; -#define PIO_UNIMAP 0x4B67 /* put unicode-to-font mapping in kernel */ -#define PIO_UNIMAPCLR 0x4B68 /* clear table, possibly advise hash algorithm */ -struct unimapinit { - unsigned short advised_hashsize; /* 0 if no opinion */ - unsigned short advised_hashstep; /* 0 if no opinion */ - unsigned short advised_hashlevel; /* 0 if no opinion */ -}; - -#define UNI_DIRECT_BASE 0xF000 /* start of Direct Font Region */ -#define UNI_DIRECT_MASK 0x01FF /* Direct Font Region bitmask */ - -#define K_RAW 0x00 -#define K_XLATE 0x01 -#define K_MEDIUMRAW 0x02 -#define K_UNICODE 0x03 -#define K_OFF 0x04 -#define KDGKBMODE 0x4B44 /* gets current keyboard mode */ -#define KDSKBMODE 0x4B45 /* sets current keyboard mode */ - -#define K_METABIT 0x03 -#define K_ESCPREFIX 0x04 -#define KDGKBMETA 0x4B62 /* gets meta key handling mode */ -#define KDSKBMETA 0x4B63 /* sets meta key handling mode */ - -#define K_SCROLLLOCK 0x01 -#define K_NUMLOCK 0x02 -#define K_CAPSLOCK 0x04 -#define KDGKBLED 0x4B64 /* get led flags (not lights) */ -#define KDSKBLED 0x4B65 /* set led flags (not lights) */ - -struct kbentry { - unsigned char kb_table; - unsigned char kb_index; - unsigned short kb_value; -}; -#define K_NORMTAB 0x00 -#define K_SHIFTTAB 0x01 -#define K_ALTTAB 0x02 -#define K_ALTSHIFTTAB 0x03 - -#define KDGKBENT 0x4B46 /* gets one entry in translation table */ -#define KDSKBENT 0x4B47 /* sets one entry in translation table */ - -struct kbsentry { - unsigned char kb_func; - unsigned char kb_string[512]; -}; -#define KDGKBSENT 0x4B48 /* gets one function key string entry */ -#define KDSKBSENT 0x4B49 /* sets one function key string entry */ - -struct kbdiacr { - unsigned char diacr, base, result; -}; -struct kbdiacrs { - unsigned int kb_cnt; /* number of entries in following array */ - struct kbdiacr kbdiacr[256]; /* MAX_DIACR from keyboard.h */ -}; -#define KDGKBDIACR 0x4B4A /* read kernel accent table */ -#define KDSKBDIACR 0x4B4B /* write kernel accent table */ - -struct kbdiacruc { - unsigned int diacr, base, result; -}; -struct kbdiacrsuc { - unsigned int kb_cnt; /* number of entries in following array */ - struct kbdiacruc kbdiacruc[256]; /* MAX_DIACR from keyboard.h */ -}; -#define KDGKBDIACRUC 0x4BFA /* read kernel accent table - UCS */ -#define KDSKBDIACRUC 0x4BFB /* write kernel accent table - UCS */ - -struct kbkeycode { - unsigned int scancode, keycode; -}; -#define KDGETKEYCODE 0x4B4C /* read kernel keycode table entry */ -#define KDSETKEYCODE 0x4B4D /* write kernel keycode table entry */ - -#define KDSIGACCEPT 0x4B4E /* accept kbd generated signals */ - -struct kbd_repeat { - int delay; /* in msec; <= 0: don't change */ - int period; /* in msec; <= 0: don't change */ - /* earlier this field was misnamed "rate" */ -}; - -#define KDKBDREP 0x4B52 /* set keyboard delay/repeat rate; - * actually used values are returned */ - -#define KDFONTOP 0x4B72 /* font operations */ - -struct console_font_op { - unsigned int op; /* operation code KD_FONT_OP_* */ - unsigned int flags; /* KD_FONT_FLAG_* */ - unsigned int width, height; /* font size */ - unsigned int charcount; - unsigned char __user *data; /* font data with height fixed to 32 */ -}; - -struct console_font { - unsigned int width, height; /* font size */ - unsigned int charcount; - unsigned char *data; /* font data with height fixed to 32 */ -}; - -#define KD_FONT_OP_SET 0 /* Set font */ -#define KD_FONT_OP_GET 1 /* Get font */ -#define KD_FONT_OP_SET_DEFAULT 2 /* Set font to default, data points to name / NULL */ -#define KD_FONT_OP_COPY 3 /* Copy from another console */ - -#define KD_FONT_FLAG_DONT_RECALC 1 /* Don't recalculate hw charcell size [compat] */ -#ifdef __KERNEL__ #define KD_FONT_FLAG_OLD 0x80000000 /* Invoked via old interface [compat] */ -#endif - -/* note: 0x4B00-0x4B4E all have had a value at some time; - don't reuse for the time being */ -/* note: 0x4B60-0x4B6D, 0x4B70-0x4B72 used above */ - #endif /* _LINUX_KD_H */ diff --git a/include/linux/kdev_t.h b/include/linux/kdev_t.h index 2dacab8becc..c838abe3ee0 100644 --- a/include/linux/kdev_t.h +++ b/include/linux/kdev_t.h @@ -1,6 +1,8 @@ #ifndef _LINUX_KDEV_T_H #define _LINUX_KDEV_T_H -#ifdef __KERNEL__ + +#include <uapi/linux/kdev_t.h> + #define MINORBITS 20 #define MINORMASK ((1U << MINORBITS) - 1) @@ -87,14 +89,4 @@ static inline unsigned sysv_minor(u32 dev) return dev & 0x3ffff; } -#else /* __KERNEL__ */ - -/* -Some programs want their definitions of MAJOR and MINOR and MKDEV -from the kernel sources. These must be the externally visible ones. -*/ -#define MAJOR(dev) ((dev)>>8) -#define MINOR(dev) ((dev) & 0xff) -#define MKDEV(ma,mi) ((ma)<<8 | (mi)) -#endif /* __KERNEL__ */ #endif diff --git a/include/linux/kernel-page-flags.h b/include/linux/kernel-page-flags.h index a1bdf696635..546eb6a7693 100644 --- a/include/linux/kernel-page-flags.h +++ b/include/linux/kernel-page-flags.h @@ -1,38 +1,8 @@ #ifndef LINUX_KERNEL_PAGE_FLAGS_H #define LINUX_KERNEL_PAGE_FLAGS_H -/* - * Stable page flag bits exported to user space - */ - -#define KPF_LOCKED 0 -#define KPF_ERROR 1 -#define KPF_REFERENCED 2 -#define KPF_UPTODATE 3 -#define KPF_DIRTY 4 -#define KPF_LRU 5 -#define KPF_ACTIVE 6 -#define KPF_SLAB 7 -#define KPF_WRITEBACK 8 -#define KPF_RECLAIM 9 -#define KPF_BUDDY 10 - -/* 11-20: new additions in 2.6.31 */ -#define KPF_MMAP 11 -#define KPF_ANON 12 -#define KPF_SWAPCACHE 13 -#define KPF_SWAPBACKED 14 -#define KPF_COMPOUND_HEAD 15 -#define KPF_COMPOUND_TAIL 16 -#define KPF_HUGE 17 -#define KPF_UNEVICTABLE 18 -#define KPF_HWPOISON 19 -#define KPF_NOPAGE 20 +#include <uapi/linux/kernel-page-flags.h> -#define KPF_KSM 21 -#define KPF_THP 22 - -#ifdef __KERNEL__ /* kernel hacking assistances * WARNING: subject to change, never rely on them! @@ -46,6 +16,4 @@ #define KPF_ARCH 38 #define KPF_UNCACHED 39 -#endif /* __KERNEL__ */ - #endif /* LINUX_KERNEL_PAGE_FLAGS_H */ diff --git a/include/linux/kernel.h b/include/linux/kernel.h index 2451f1f7a1d..a123b13b70f 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -1,15 +1,6 @@ #ifndef _LINUX_KERNEL_H #define _LINUX_KERNEL_H -#include <linux/sysinfo.h> - -/* - * 'kernel.h' contains some often-used function prototypes etc - */ -#define __ALIGN_KERNEL(x, a) __ALIGN_KERNEL_MASK(x, (typeof(x))(a) - 1) -#define __ALIGN_KERNEL_MASK(x, mask) (((x) + (mask)) & ~(mask)) - -#ifdef __KERNEL__ #include <stdarg.h> #include <linux/linkage.h> @@ -22,6 +13,7 @@ #include <linux/printk.h> #include <linux/dynamic_debug.h> #include <asm/byteorder.h> +#include <uapi/linux/kernel.h> #define USHRT_MAX ((u16)(~0U)) #define SHRT_MAX ((s16)(USHRT_MAX>>1)) @@ -716,6 +708,4 @@ static inline void ftrace_dump(enum ftrace_dump_mode oops_dump_mode) { } extern int do_sysinfo(struct sysinfo *info); -#endif /* __KERNEL__ */ - #endif diff --git a/include/linux/kernelcapi.h b/include/linux/kernelcapi.h index 9c2683929fd..9be37da9368 100644 --- a/include/linux/kernelcapi.h +++ b/include/linux/kernelcapi.h @@ -6,49 +6,15 @@ * (c) Copyright 1997 by Carsten Paeth (calle@calle.in-berlin.de) * */ - #ifndef __KERNELCAPI_H__ #define __KERNELCAPI_H__ -#define CAPI_MAXAPPL 240 /* maximum number of applications */ -#define CAPI_MAXCONTR 32 /* maximum number of controller */ -#define CAPI_MAXDATAWINDOW 8 - - -typedef struct kcapi_flagdef { - int contr; - int flag; -} kcapi_flagdef; - -typedef struct kcapi_carddef { - char driver[32]; - unsigned int port; - unsigned irq; - unsigned int membase; - int cardnr; -} kcapi_carddef; - -/* new ioctls >= 10 */ -#define KCAPI_CMD_TRACE 10 -#define KCAPI_CMD_ADDCARD 11 /* OBSOLETE */ - -/* - * flag > 2 => trace also data - * flag & 1 => show trace - */ -#define KCAPI_TRACE_OFF 0 -#define KCAPI_TRACE_SHORT_NO_DATA 1 -#define KCAPI_TRACE_FULL_NO_DATA 2 -#define KCAPI_TRACE_SHORT 3 -#define KCAPI_TRACE_FULL 4 - - -#ifdef __KERNEL__ #include <linux/list.h> #include <linux/skbuff.h> #include <linux/workqueue.h> #include <linux/notifier.h> +#include <uapi/linux/kernelcapi.h> struct capi20_appl { u16 applid; @@ -150,6 +116,4 @@ typedef enum { CapiCallGivenToOtherApplication = 0x3304, } CAPI_REASON; -#endif /* __KERNEL__ */ - #endif /* __KERNELCAPI_H__ */ diff --git a/include/linux/kexec.h b/include/linux/kexec.h index 37c5f726114..d0b8458a703 100644 --- a/include/linux/kexec.h +++ b/include/linux/kexec.h @@ -1,57 +1,8 @@ #ifndef LINUX_KEXEC_H #define LINUX_KEXEC_H -/* kexec system call - It loads the new kernel to boot into. - * kexec does not sync, or unmount filesystems so if you need - * that to happen you need to do that yourself. - */ - -#include <linux/types.h> - -/* kexec flags for different usage scenarios */ -#define KEXEC_ON_CRASH 0x00000001 -#define KEXEC_PRESERVE_CONTEXT 0x00000002 -#define KEXEC_ARCH_MASK 0xffff0000 - -/* These values match the ELF architecture values. - * Unless there is a good reason that should continue to be the case. - */ -#define KEXEC_ARCH_DEFAULT ( 0 << 16) -#define KEXEC_ARCH_386 ( 3 << 16) -#define KEXEC_ARCH_X86_64 (62 << 16) -#define KEXEC_ARCH_PPC (20 << 16) -#define KEXEC_ARCH_PPC64 (21 << 16) -#define KEXEC_ARCH_IA_64 (50 << 16) -#define KEXEC_ARCH_ARM (40 << 16) -#define KEXEC_ARCH_S390 (22 << 16) -#define KEXEC_ARCH_SH (42 << 16) -#define KEXEC_ARCH_MIPS_LE (10 << 16) -#define KEXEC_ARCH_MIPS ( 8 << 16) - -/* The artificial cap on the number of segments passed to kexec_load. */ -#define KEXEC_SEGMENT_MAX 16 - -#ifndef __KERNEL__ -/* - * This structure is used to hold the arguments that are used when - * loading kernel binaries. - */ -struct kexec_segment { - const void *buf; - size_t bufsz; - const void *mem; - size_t memsz; -}; - -/* Load a new kernel image as described by the kexec_segment array - * consisting of passed number of segments at the entry-point address. - * The flags allow different useage types. - */ -extern int kexec_load(void *, size_t, struct kexec_segment *, - unsigned long int); -#endif /* __KERNEL__ */ +#include <uapi/linux/kexec.h> -#ifdef __KERNEL__ #ifdef CONFIG_KEXEC #include <linux/list.h> #include <linux/linkage.h> @@ -258,5 +209,4 @@ struct task_struct; static inline void crash_kexec(struct pt_regs *regs) { } static inline int kexec_should_crash(struct task_struct *p) { return 0; } #endif /* CONFIG_KEXEC */ -#endif /* __KERNEL__ */ #endif /* LINUX_KEXEC_H */ diff --git a/include/linux/key-type.h b/include/linux/key-type.h index f0c651cda7b..518a53afb9e 100644 --- a/include/linux/key-type.h +++ b/include/linux/key-type.h @@ -26,6 +26,27 @@ struct key_construction { struct key *authkey;/* authorisation for key being constructed */ }; +/* + * Pre-parsed payload, used by key add, update and instantiate. + * + * This struct will be cleared and data and datalen will be set with the data + * and length parameters from the caller and quotalen will be set from + * def_datalen from the key type. Then if the preparse() op is provided by the + * key type, that will be called. Then the struct will be passed to the + * instantiate() or the update() op. + * + * If the preparse() op is given, the free_preparse() op will be called to + * clear the contents. + */ +struct key_preparsed_payload { + char *description; /* Proposed key description (or NULL) */ + void *type_data[2]; /* Private key-type data */ + void *payload; /* Proposed payload */ + const void *data; /* Raw data */ + size_t datalen; /* Raw datalen */ + size_t quotalen; /* Quota length for proposed payload */ +}; + typedef int (*request_key_actor_t)(struct key_construction *key, const char *op, void *aux); @@ -45,18 +66,28 @@ struct key_type { /* vet a description */ int (*vet_description)(const char *description); + /* Preparse the data blob from userspace that is to be the payload, + * generating a proposed description and payload that will be handed to + * the instantiate() and update() ops. + */ + int (*preparse)(struct key_preparsed_payload *prep); + + /* Free a preparse data structure. + */ + void (*free_preparse)(struct key_preparsed_payload *prep); + /* instantiate a key of this type * - this method should call key_payload_reserve() to determine if the * user's quota will hold the payload */ - int (*instantiate)(struct key *key, const void *data, size_t datalen); + int (*instantiate)(struct key *key, struct key_preparsed_payload *prep); /* update a key of this type (optional) * - this method should call key_payload_reserve() to recalculate the * quota consumption * - the key must be locked against read when modifying */ - int (*update)(struct key *key, const void *data, size_t datalen); + int (*update)(struct key *key, struct key_preparsed_payload *prep); /* match a key against a description */ int (*match)(const struct key *key, const void *desc); diff --git a/include/linux/keyboard.h b/include/linux/keyboard.h index 86e5214ae73..131ed514652 100644 --- a/include/linux/keyboard.h +++ b/include/linux/keyboard.h @@ -1,28 +1,8 @@ #ifndef __LINUX_KEYBOARD_H #define __LINUX_KEYBOARD_H -#include <linux/wait.h> +#include <uapi/linux/keyboard.h> -#define KG_SHIFT 0 -#define KG_CTRL 2 -#define KG_ALT 3 -#define KG_ALTGR 1 -#define KG_SHIFTL 4 -#define KG_KANASHIFT 4 -#define KG_SHIFTR 5 -#define KG_CTRLL 6 -#define KG_CTRLR 7 -#define KG_CAPSSHIFT 8 - -#define NR_SHIFT 9 - -#define NR_KEYS 256 -#define MAX_NR_KEYMAPS 256 -/* This means 128Kb if all keymaps are allocated. Only the superuser - may increase the number of keymaps beyond MAX_NR_OF_USER_KEYMAPS. */ -#define MAX_NR_OF_USER_KEYMAPS 256 /* should be at least 7 */ - -#ifdef __KERNEL__ struct notifier_block; extern unsigned short *key_maps[MAX_NR_KEYMAPS]; extern unsigned short plain_map[NR_KEYS]; @@ -38,422 +18,3 @@ struct keyboard_notifier_param { extern int register_keyboard_notifier(struct notifier_block *nb); extern int unregister_keyboard_notifier(struct notifier_block *nb); #endif - -#define MAX_NR_FUNC 256 /* max nr of strings assigned to keys */ - -#define KT_LATIN 0 /* we depend on this being zero */ -#define KT_LETTER 11 /* symbol that can be acted upon by CapsLock */ -#define KT_FN 1 -#define KT_SPEC 2 -#define KT_PAD 3 -#define KT_DEAD 4 -#define KT_CONS 5 -#define KT_CUR 6 -#define KT_SHIFT 7 -#define KT_META 8 -#define KT_ASCII 9 -#define KT_LOCK 10 -#define KT_SLOCK 12 -#define KT_DEAD2 13 -#define KT_BRL 14 - -#define K(t,v) (((t)<<8)|(v)) -#define KTYP(x) ((x) >> 8) -#define KVAL(x) ((x) & 0xff) - -#define K_F1 K(KT_FN,0) -#define K_F2 K(KT_FN,1) -#define K_F3 K(KT_FN,2) -#define K_F4 K(KT_FN,3) -#define K_F5 K(KT_FN,4) -#define K_F6 K(KT_FN,5) -#define K_F7 K(KT_FN,6) -#define K_F8 K(KT_FN,7) -#define K_F9 K(KT_FN,8) -#define K_F10 K(KT_FN,9) -#define K_F11 K(KT_FN,10) -#define K_F12 K(KT_FN,11) -#define K_F13 K(KT_FN,12) -#define K_F14 K(KT_FN,13) -#define K_F15 K(KT_FN,14) -#define K_F16 K(KT_FN,15) -#define K_F17 K(KT_FN,16) -#define K_F18 K(KT_FN,17) -#define K_F19 K(KT_FN,18) -#define K_F20 K(KT_FN,19) -#define K_FIND K(KT_FN,20) -#define K_INSERT K(KT_FN,21) -#define K_REMOVE K(KT_FN,22) -#define K_SELECT K(KT_FN,23) -#define K_PGUP K(KT_FN,24) /* PGUP is a synonym for PRIOR */ -#define K_PGDN K(KT_FN,25) /* PGDN is a synonym for NEXT */ -#define K_MACRO K(KT_FN,26) -#define K_HELP K(KT_FN,27) -#define K_DO K(KT_FN,28) -#define K_PAUSE K(KT_FN,29) -#define K_F21 K(KT_FN,30) -#define K_F22 K(KT_FN,31) -#define K_F23 K(KT_FN,32) -#define K_F24 K(KT_FN,33) -#define K_F25 K(KT_FN,34) -#define K_F26 K(KT_FN,35) -#define K_F27 K(KT_FN,36) -#define K_F28 K(KT_FN,37) -#define K_F29 K(KT_FN,38) -#define K_F30 K(KT_FN,39) -#define K_F31 K(KT_FN,40) -#define K_F32 K(KT_FN,41) -#define K_F33 K(KT_FN,42) -#define K_F34 K(KT_FN,43) -#define K_F35 K(KT_FN,44) -#define K_F36 K(KT_FN,45) -#define K_F37 K(KT_FN,46) -#define K_F38 K(KT_FN,47) -#define K_F39 K(KT_FN,48) -#define K_F40 K(KT_FN,49) -#define K_F41 K(KT_FN,50) -#define K_F42 K(KT_FN,51) -#define K_F43 K(KT_FN,52) -#define K_F44 K(KT_FN,53) -#define K_F45 K(KT_FN,54) -#define K_F46 K(KT_FN,55) -#define K_F47 K(KT_FN,56) -#define K_F48 K(KT_FN,57) -#define K_F49 K(KT_FN,58) -#define K_F50 K(KT_FN,59) -#define K_F51 K(KT_FN,60) -#define K_F52 K(KT_FN,61) -#define K_F53 K(KT_FN,62) -#define K_F54 K(KT_FN,63) -#define K_F55 K(KT_FN,64) -#define K_F56 K(KT_FN,65) -#define K_F57 K(KT_FN,66) -#define K_F58 K(KT_FN,67) -#define K_F59 K(KT_FN,68) -#define K_F60 K(KT_FN,69) -#define K_F61 K(KT_FN,70) -#define K_F62 K(KT_FN,71) -#define K_F63 K(KT_FN,72) -#define K_F64 K(KT_FN,73) -#define K_F65 K(KT_FN,74) -#define K_F66 K(KT_FN,75) -#define K_F67 K(KT_FN,76) -#define K_F68 K(KT_FN,77) -#define K_F69 K(KT_FN,78) -#define K_F70 K(KT_FN,79) -#define K_F71 K(KT_FN,80) -#define K_F72 K(KT_FN,81) -#define K_F73 K(KT_FN,82) -#define K_F74 K(KT_FN,83) -#define K_F75 K(KT_FN,84) -#define K_F76 K(KT_FN,85) -#define K_F77 K(KT_FN,86) -#define K_F78 K(KT_FN,87) -#define K_F79 K(KT_FN,88) -#define K_F80 K(KT_FN,89) -#define K_F81 K(KT_FN,90) -#define K_F82 K(KT_FN,91) -#define K_F83 K(KT_FN,92) -#define K_F84 K(KT_FN,93) -#define K_F85 K(KT_FN,94) -#define K_F86 K(KT_FN,95) -#define K_F87 K(KT_FN,96) -#define K_F88 K(KT_FN,97) -#define K_F89 K(KT_FN,98) -#define K_F90 K(KT_FN,99) -#define K_F91 K(KT_FN,100) -#define K_F92 K(KT_FN,101) -#define K_F93 K(KT_FN,102) -#define K_F94 K(KT_FN,103) -#define K_F95 K(KT_FN,104) -#define K_F96 K(KT_FN,105) -#define K_F97 K(KT_FN,106) -#define K_F98 K(KT_FN,107) -#define K_F99 K(KT_FN,108) -#define K_F100 K(KT_FN,109) -#define K_F101 K(KT_FN,110) -#define K_F102 K(KT_FN,111) -#define K_F103 K(KT_FN,112) -#define K_F104 K(KT_FN,113) -#define K_F105 K(KT_FN,114) -#define K_F106 K(KT_FN,115) -#define K_F107 K(KT_FN,116) -#define K_F108 K(KT_FN,117) -#define K_F109 K(KT_FN,118) -#define K_F110 K(KT_FN,119) -#define K_F111 K(KT_FN,120) -#define K_F112 K(KT_FN,121) -#define K_F113 K(KT_FN,122) -#define K_F114 K(KT_FN,123) -#define K_F115 K(KT_FN,124) -#define K_F116 K(KT_FN,125) -#define K_F117 K(KT_FN,126) -#define K_F118 K(KT_FN,127) -#define K_F119 K(KT_FN,128) -#define K_F120 K(KT_FN,129) -#define K_F121 K(KT_FN,130) -#define K_F122 K(KT_FN,131) -#define K_F123 K(KT_FN,132) -#define K_F124 K(KT_FN,133) -#define K_F125 K(KT_FN,134) -#define K_F126 K(KT_FN,135) -#define K_F127 K(KT_FN,136) -#define K_F128 K(KT_FN,137) -#define K_F129 K(KT_FN,138) -#define K_F130 K(KT_FN,139) -#define K_F131 K(KT_FN,140) -#define K_F132 K(KT_FN,141) -#define K_F133 K(KT_FN,142) -#define K_F134 K(KT_FN,143) -#define K_F135 K(KT_FN,144) -#define K_F136 K(KT_FN,145) -#define K_F137 K(KT_FN,146) -#define K_F138 K(KT_FN,147) -#define K_F139 K(KT_FN,148) -#define K_F140 K(KT_FN,149) -#define K_F141 K(KT_FN,150) -#define K_F142 K(KT_FN,151) -#define K_F143 K(KT_FN,152) -#define K_F144 K(KT_FN,153) -#define K_F145 K(KT_FN,154) -#define K_F146 K(KT_FN,155) -#define K_F147 K(KT_FN,156) -#define K_F148 K(KT_FN,157) -#define K_F149 K(KT_FN,158) -#define K_F150 K(KT_FN,159) -#define K_F151 K(KT_FN,160) -#define K_F152 K(KT_FN,161) -#define K_F153 K(KT_FN,162) -#define K_F154 K(KT_FN,163) -#define K_F155 K(KT_FN,164) -#define K_F156 K(KT_FN,165) -#define K_F157 K(KT_FN,166) -#define K_F158 K(KT_FN,167) -#define K_F159 K(KT_FN,168) -#define K_F160 K(KT_FN,169) -#define K_F161 K(KT_FN,170) -#define K_F162 K(KT_FN,171) -#define K_F163 K(KT_FN,172) -#define K_F164 K(KT_FN,173) -#define K_F165 K(KT_FN,174) -#define K_F166 K(KT_FN,175) -#define K_F167 K(KT_FN,176) -#define K_F168 K(KT_FN,177) -#define K_F169 K(KT_FN,178) -#define K_F170 K(KT_FN,179) -#define K_F171 K(KT_FN,180) -#define K_F172 K(KT_FN,181) -#define K_F173 K(KT_FN,182) -#define K_F174 K(KT_FN,183) -#define K_F175 K(KT_FN,184) -#define K_F176 K(KT_FN,185) -#define K_F177 K(KT_FN,186) -#define K_F178 K(KT_FN,187) -#define K_F179 K(KT_FN,188) -#define K_F180 K(KT_FN,189) -#define K_F181 K(KT_FN,190) -#define K_F182 K(KT_FN,191) -#define K_F183 K(KT_FN,192) -#define K_F184 K(KT_FN,193) -#define K_F185 K(KT_FN,194) -#define K_F186 K(KT_FN,195) -#define K_F187 K(KT_FN,196) -#define K_F188 K(KT_FN,197) -#define K_F189 K(KT_FN,198) -#define K_F190 K(KT_FN,199) -#define K_F191 K(KT_FN,200) -#define K_F192 K(KT_FN,201) -#define K_F193 K(KT_FN,202) -#define K_F194 K(KT_FN,203) -#define K_F195 K(KT_FN,204) -#define K_F196 K(KT_FN,205) -#define K_F197 K(KT_FN,206) -#define K_F198 K(KT_FN,207) -#define K_F199 K(KT_FN,208) -#define K_F200 K(KT_FN,209) -#define K_F201 K(KT_FN,210) -#define K_F202 K(KT_FN,211) -#define K_F203 K(KT_FN,212) -#define K_F204 K(KT_FN,213) -#define K_F205 K(KT_FN,214) -#define K_F206 K(KT_FN,215) -#define K_F207 K(KT_FN,216) -#define K_F208 K(KT_FN,217) -#define K_F209 K(KT_FN,218) -#define K_F210 K(KT_FN,219) -#define K_F211 K(KT_FN,220) -#define K_F212 K(KT_FN,221) -#define K_F213 K(KT_FN,222) -#define K_F214 K(KT_FN,223) -#define K_F215 K(KT_FN,224) -#define K_F216 K(KT_FN,225) -#define K_F217 K(KT_FN,226) -#define K_F218 K(KT_FN,227) -#define K_F219 K(KT_FN,228) -#define K_F220 K(KT_FN,229) -#define K_F221 K(KT_FN,230) -#define K_F222 K(KT_FN,231) -#define K_F223 K(KT_FN,232) -#define K_F224 K(KT_FN,233) -#define K_F225 K(KT_FN,234) -#define K_F226 K(KT_FN,235) -#define K_F227 K(KT_FN,236) -#define K_F228 K(KT_FN,237) -#define K_F229 K(KT_FN,238) -#define K_F230 K(KT_FN,239) -#define K_F231 K(KT_FN,240) -#define K_F232 K(KT_FN,241) -#define K_F233 K(KT_FN,242) -#define K_F234 K(KT_FN,243) -#define K_F235 K(KT_FN,244) -#define K_F236 K(KT_FN,245) -#define K_F237 K(KT_FN,246) -#define K_F238 K(KT_FN,247) -#define K_F239 K(KT_FN,248) -#define K_F240 K(KT_FN,249) -#define K_F241 K(KT_FN,250) -#define K_F242 K(KT_FN,251) -#define K_F243 K(KT_FN,252) -#define K_F244 K(KT_FN,253) -#define K_F245 K(KT_FN,254) -#define K_UNDO K(KT_FN,255) - - -#define K_HOLE K(KT_SPEC,0) -#define K_ENTER K(KT_SPEC,1) -#define K_SH_REGS K(KT_SPEC,2) -#define K_SH_MEM K(KT_SPEC,3) -#define K_SH_STAT K(KT_SPEC,4) -#define K_BREAK K(KT_SPEC,5) -#define K_CONS K(KT_SPEC,6) -#define K_CAPS K(KT_SPEC,7) -#define K_NUM K(KT_SPEC,8) -#define K_HOLD K(KT_SPEC,9) -#define K_SCROLLFORW K(KT_SPEC,10) -#define K_SCROLLBACK K(KT_SPEC,11) -#define K_BOOT K(KT_SPEC,12) -#define K_CAPSON K(KT_SPEC,13) -#define K_COMPOSE K(KT_SPEC,14) -#define K_SAK K(KT_SPEC,15) -#define K_DECRCONSOLE K(KT_SPEC,16) -#define K_INCRCONSOLE K(KT_SPEC,17) -#define K_SPAWNCONSOLE K(KT_SPEC,18) -#define K_BARENUMLOCK K(KT_SPEC,19) - -#define K_ALLOCATED K(KT_SPEC,126) /* dynamically allocated keymap */ -#define K_NOSUCHMAP K(KT_SPEC,127) /* returned by KDGKBENT */ - -#define K_P0 K(KT_PAD,0) -#define K_P1 K(KT_PAD,1) -#define K_P2 K(KT_PAD,2) -#define K_P3 K(KT_PAD,3) -#define K_P4 K(KT_PAD,4) -#define K_P5 K(KT_PAD,5) -#define K_P6 K(KT_PAD,6) -#define K_P7 K(KT_PAD,7) -#define K_P8 K(KT_PAD,8) -#define K_P9 K(KT_PAD,9) -#define K_PPLUS K(KT_PAD,10) /* key-pad plus */ -#define K_PMINUS K(KT_PAD,11) /* key-pad minus */ -#define K_PSTAR K(KT_PAD,12) /* key-pad asterisk (star) */ -#define K_PSLASH K(KT_PAD,13) /* key-pad slash */ -#define K_PENTER K(KT_PAD,14) /* key-pad enter */ -#define K_PCOMMA K(KT_PAD,15) /* key-pad comma: kludge... */ -#define K_PDOT K(KT_PAD,16) /* key-pad dot (period): kludge... */ -#define K_PPLUSMINUS K(KT_PAD,17) /* key-pad plus/minus */ -#define K_PPARENL K(KT_PAD,18) /* key-pad left parenthesis */ -#define K_PPARENR K(KT_PAD,19) /* key-pad right parenthesis */ - -#define NR_PAD 20 - -#define K_DGRAVE K(KT_DEAD,0) -#define K_DACUTE K(KT_DEAD,1) -#define K_DCIRCM K(KT_DEAD,2) -#define K_DTILDE K(KT_DEAD,3) -#define K_DDIERE K(KT_DEAD,4) -#define K_DCEDIL K(KT_DEAD,5) - -#define NR_DEAD 6 - -#define K_DOWN K(KT_CUR,0) -#define K_LEFT K(KT_CUR,1) -#define K_RIGHT K(KT_CUR,2) -#define K_UP K(KT_CUR,3) - -#define K_SHIFT K(KT_SHIFT,KG_SHIFT) -#define K_CTRL K(KT_SHIFT,KG_CTRL) -#define K_ALT K(KT_SHIFT,KG_ALT) -#define K_ALTGR K(KT_SHIFT,KG_ALTGR) -#define K_SHIFTL K(KT_SHIFT,KG_SHIFTL) -#define K_SHIFTR K(KT_SHIFT,KG_SHIFTR) -#define K_CTRLL K(KT_SHIFT,KG_CTRLL) -#define K_CTRLR K(KT_SHIFT,KG_CTRLR) -#define K_CAPSSHIFT K(KT_SHIFT,KG_CAPSSHIFT) - -#define K_ASC0 K(KT_ASCII,0) -#define K_ASC1 K(KT_ASCII,1) -#define K_ASC2 K(KT_ASCII,2) -#define K_ASC3 K(KT_ASCII,3) -#define K_ASC4 K(KT_ASCII,4) -#define K_ASC5 K(KT_ASCII,5) -#define K_ASC6 K(KT_ASCII,6) -#define K_ASC7 K(KT_ASCII,7) -#define K_ASC8 K(KT_ASCII,8) -#define K_ASC9 K(KT_ASCII,9) -#define K_HEX0 K(KT_ASCII,10) -#define K_HEX1 K(KT_ASCII,11) -#define K_HEX2 K(KT_ASCII,12) -#define K_HEX3 K(KT_ASCII,13) -#define K_HEX4 K(KT_ASCII,14) -#define K_HEX5 K(KT_ASCII,15) -#define K_HEX6 K(KT_ASCII,16) -#define K_HEX7 K(KT_ASCII,17) -#define K_HEX8 K(KT_ASCII,18) -#define K_HEX9 K(KT_ASCII,19) -#define K_HEXa K(KT_ASCII,20) -#define K_HEXb K(KT_ASCII,21) -#define K_HEXc K(KT_ASCII,22) -#define K_HEXd K(KT_ASCII,23) -#define K_HEXe K(KT_ASCII,24) -#define K_HEXf K(KT_ASCII,25) - -#define NR_ASCII 26 - -#define K_SHIFTLOCK K(KT_LOCK,KG_SHIFT) -#define K_CTRLLOCK K(KT_LOCK,KG_CTRL) -#define K_ALTLOCK K(KT_LOCK,KG_ALT) -#define K_ALTGRLOCK K(KT_LOCK,KG_ALTGR) -#define K_SHIFTLLOCK K(KT_LOCK,KG_SHIFTL) -#define K_SHIFTRLOCK K(KT_LOCK,KG_SHIFTR) -#define K_CTRLLLOCK K(KT_LOCK,KG_CTRLL) -#define K_CTRLRLOCK K(KT_LOCK,KG_CTRLR) -#define K_CAPSSHIFTLOCK K(KT_LOCK,KG_CAPSSHIFT) - -#define K_SHIFT_SLOCK K(KT_SLOCK,KG_SHIFT) -#define K_CTRL_SLOCK K(KT_SLOCK,KG_CTRL) -#define K_ALT_SLOCK K(KT_SLOCK,KG_ALT) -#define K_ALTGR_SLOCK K(KT_SLOCK,KG_ALTGR) -#define K_SHIFTL_SLOCK K(KT_SLOCK,KG_SHIFTL) -#define K_SHIFTR_SLOCK K(KT_SLOCK,KG_SHIFTR) -#define K_CTRLL_SLOCK K(KT_SLOCK,KG_CTRLL) -#define K_CTRLR_SLOCK K(KT_SLOCK,KG_CTRLR) -#define K_CAPSSHIFT_SLOCK K(KT_SLOCK,KG_CAPSSHIFT) - -#define NR_LOCK 9 - -#define K_BRL_BLANK K(KT_BRL, 0) -#define K_BRL_DOT1 K(KT_BRL, 1) -#define K_BRL_DOT2 K(KT_BRL, 2) -#define K_BRL_DOT3 K(KT_BRL, 3) -#define K_BRL_DOT4 K(KT_BRL, 4) -#define K_BRL_DOT5 K(KT_BRL, 5) -#define K_BRL_DOT6 K(KT_BRL, 6) -#define K_BRL_DOT7 K(KT_BRL, 7) -#define K_BRL_DOT8 K(KT_BRL, 8) -#define K_BRL_DOT9 K(KT_BRL, 9) -#define K_BRL_DOT10 K(KT_BRL, 10) - -#define NR_BRL 11 - -#define MAX_DIACR 256 -#endif diff --git a/include/linux/kvm_para.h b/include/linux/kvm_para.h index ff476ddaf31..00a97bb905d 100644 --- a/include/linux/kvm_para.h +++ b/include/linux/kvm_para.h @@ -1,31 +1,8 @@ #ifndef __LINUX_KVM_PARA_H #define __LINUX_KVM_PARA_H -/* - * This header file provides a method for making a hypercall to the host - * Architectures should define: - * - kvm_hypercall0, kvm_hypercall1... - * - kvm_arch_para_features - * - kvm_para_available - */ +#include <uapi/linux/kvm_para.h> -/* Return values for hypercalls */ -#define KVM_ENOSYS 1000 -#define KVM_EFAULT EFAULT -#define KVM_E2BIG E2BIG -#define KVM_EPERM EPERM - -#define KVM_HC_VAPIC_POLL_IRQ 1 -#define KVM_HC_MMU_OP 2 -#define KVM_HC_FEATURES 3 -#define KVM_HC_PPC_MAP_MAGIC_PAGE 4 - -/* - * hypercalls use architecture specific - */ -#include <asm/kvm_para.h> - -#ifdef __KERNEL__ static inline int kvm_para_has_feature(unsigned int feature) { @@ -33,5 +10,4 @@ static inline int kvm_para_has_feature(unsigned int feature) return 1; return 0; } -#endif /* __KERNEL__ */ #endif /* __LINUX_KVM_PARA_H */ diff --git a/include/linux/l2tp.h b/include/linux/l2tp.h index 7eab668f60f..bffdb962f1a 100644 --- a/include/linux/l2tp.h +++ b/include/linux/l2tp.h @@ -3,181 +3,11 @@ * * Author: James Chapman <jchapman@katalix.com> */ - #ifndef _LINUX_L2TP_H_ #define _LINUX_L2TP_H_ -#include <linux/types.h> -#include <linux/socket.h> -#ifdef __KERNEL__ #include <linux/in.h> #include <linux/in6.h> -#else -#include <netinet/in.h> -#endif - -#define IPPROTO_L2TP 115 - -/** - * struct sockaddr_l2tpip - the sockaddr structure for L2TP-over-IP sockets - * @l2tp_family: address family number AF_L2TPIP. - * @l2tp_addr: protocol specific address information - * @l2tp_conn_id: connection id of tunnel - */ -#define __SOCK_SIZE__ 16 /* sizeof(struct sockaddr) */ -struct sockaddr_l2tpip { - /* The first fields must match struct sockaddr_in */ - __kernel_sa_family_t l2tp_family; /* AF_INET */ - __be16 l2tp_unused; /* INET port number (unused) */ - struct in_addr l2tp_addr; /* Internet address */ - - __u32 l2tp_conn_id; /* Connection ID of tunnel */ - - /* Pad to size of `struct sockaddr'. */ - unsigned char __pad[sizeof(struct sockaddr) - - sizeof(__kernel_sa_family_t) - - sizeof(__be16) - sizeof(struct in_addr) - - sizeof(__u32)]; -}; - -/** - * struct sockaddr_l2tpip6 - the sockaddr structure for L2TP-over-IPv6 sockets - * @l2tp_family: address family number AF_L2TPIP. - * @l2tp_addr: protocol specific address information - * @l2tp_conn_id: connection id of tunnel - */ -struct sockaddr_l2tpip6 { - /* The first fields must match struct sockaddr_in6 */ - __kernel_sa_family_t l2tp_family; /* AF_INET6 */ - __be16 l2tp_unused; /* INET port number (unused) */ - __be32 l2tp_flowinfo; /* IPv6 flow information */ - struct in6_addr l2tp_addr; /* IPv6 address */ - __u32 l2tp_scope_id; /* scope id (new in RFC2553) */ - __u32 l2tp_conn_id; /* Connection ID of tunnel */ -}; - -/***************************************************************************** - * NETLINK_GENERIC netlink family. - *****************************************************************************/ - -/* - * Commands. - * Valid TLVs of each command are:- - * TUNNEL_CREATE - CONN_ID, pw_type, netns, ifname, ipinfo, udpinfo, udpcsum, vlanid - * TUNNEL_DELETE - CONN_ID - * TUNNEL_MODIFY - CONN_ID, udpcsum - * TUNNEL_GETSTATS - CONN_ID, (stats) - * TUNNEL_GET - CONN_ID, (...) - * SESSION_CREATE - SESSION_ID, PW_TYPE, offset, data_seq, cookie, peer_cookie, offset, l2spec - * SESSION_DELETE - SESSION_ID - * SESSION_MODIFY - SESSION_ID, data_seq - * SESSION_GET - SESSION_ID, (...) - * SESSION_GETSTATS - SESSION_ID, (stats) - * - */ -enum { - L2TP_CMD_NOOP, - L2TP_CMD_TUNNEL_CREATE, - L2TP_CMD_TUNNEL_DELETE, - L2TP_CMD_TUNNEL_MODIFY, - L2TP_CMD_TUNNEL_GET, - L2TP_CMD_SESSION_CREATE, - L2TP_CMD_SESSION_DELETE, - L2TP_CMD_SESSION_MODIFY, - L2TP_CMD_SESSION_GET, - __L2TP_CMD_MAX, -}; - -#define L2TP_CMD_MAX (__L2TP_CMD_MAX - 1) - -/* - * ATTR types defined for L2TP - */ -enum { - L2TP_ATTR_NONE, /* no data */ - L2TP_ATTR_PW_TYPE, /* u16, enum l2tp_pwtype */ - L2TP_ATTR_ENCAP_TYPE, /* u16, enum l2tp_encap_type */ - L2TP_ATTR_OFFSET, /* u16 */ - L2TP_ATTR_DATA_SEQ, /* u16 */ - L2TP_ATTR_L2SPEC_TYPE, /* u8, enum l2tp_l2spec_type */ - L2TP_ATTR_L2SPEC_LEN, /* u8, enum l2tp_l2spec_type */ - L2TP_ATTR_PROTO_VERSION, /* u8 */ - L2TP_ATTR_IFNAME, /* string */ - L2TP_ATTR_CONN_ID, /* u32 */ - L2TP_ATTR_PEER_CONN_ID, /* u32 */ - L2TP_ATTR_SESSION_ID, /* u32 */ - L2TP_ATTR_PEER_SESSION_ID, /* u32 */ - L2TP_ATTR_UDP_CSUM, /* u8 */ - L2TP_ATTR_VLAN_ID, /* u16 */ - L2TP_ATTR_COOKIE, /* 0, 4 or 8 bytes */ - L2TP_ATTR_PEER_COOKIE, /* 0, 4 or 8 bytes */ - L2TP_ATTR_DEBUG, /* u32 */ - L2TP_ATTR_RECV_SEQ, /* u8 */ - L2TP_ATTR_SEND_SEQ, /* u8 */ - L2TP_ATTR_LNS_MODE, /* u8 */ - L2TP_ATTR_USING_IPSEC, /* u8 */ - L2TP_ATTR_RECV_TIMEOUT, /* msec */ - L2TP_ATTR_FD, /* int */ - L2TP_ATTR_IP_SADDR, /* u32 */ - L2TP_ATTR_IP_DADDR, /* u32 */ - L2TP_ATTR_UDP_SPORT, /* u16 */ - L2TP_ATTR_UDP_DPORT, /* u16 */ - L2TP_ATTR_MTU, /* u16 */ - L2TP_ATTR_MRU, /* u16 */ - L2TP_ATTR_STATS, /* nested */ - L2TP_ATTR_IP6_SADDR, /* struct in6_addr */ - L2TP_ATTR_IP6_DADDR, /* struct in6_addr */ - __L2TP_ATTR_MAX, -}; - -#define L2TP_ATTR_MAX (__L2TP_ATTR_MAX - 1) - -/* Nested in L2TP_ATTR_STATS */ -enum { - L2TP_ATTR_STATS_NONE, /* no data */ - L2TP_ATTR_TX_PACKETS, /* u64 */ - L2TP_ATTR_TX_BYTES, /* u64 */ - L2TP_ATTR_TX_ERRORS, /* u64 */ - L2TP_ATTR_RX_PACKETS, /* u64 */ - L2TP_ATTR_RX_BYTES, /* u64 */ - L2TP_ATTR_RX_SEQ_DISCARDS, /* u64 */ - L2TP_ATTR_RX_OOS_PACKETS, /* u64 */ - L2TP_ATTR_RX_ERRORS, /* u64 */ - __L2TP_ATTR_STATS_MAX, -}; - -#define L2TP_ATTR_STATS_MAX (__L2TP_ATTR_STATS_MAX - 1) - -enum l2tp_pwtype { - L2TP_PWTYPE_NONE = 0x0000, - L2TP_PWTYPE_ETH_VLAN = 0x0004, - L2TP_PWTYPE_ETH = 0x0005, - L2TP_PWTYPE_PPP = 0x0007, - L2TP_PWTYPE_PPP_AC = 0x0008, - L2TP_PWTYPE_IP = 0x000b, - __L2TP_PWTYPE_MAX -}; - -enum l2tp_l2spec_type { - L2TP_L2SPECTYPE_NONE, - L2TP_L2SPECTYPE_DEFAULT, -}; - -enum l2tp_encap_type { - L2TP_ENCAPTYPE_UDP, - L2TP_ENCAPTYPE_IP, -}; - -enum l2tp_seqmode { - L2TP_SEQ_NONE = 0, - L2TP_SEQ_IP = 1, - L2TP_SEQ_ALL = 2, -}; - -/* - * NETLINK_GENERIC related info - */ -#define L2TP_GENL_NAME "l2tp" -#define L2TP_GENL_VERSION 0x1 +#include <uapi/linux/l2tp.h> #endif diff --git a/include/linux/lglock.h b/include/linux/lglock.h index f01e5f6d1f0..0d24e932db0 100644 --- a/include/linux/lglock.h +++ b/include/linux/lglock.h @@ -32,20 +32,13 @@ #define br_write_lock(name) lg_global_lock(name) #define br_write_unlock(name) lg_global_unlock(name) -#define DEFINE_BRLOCK(name) DEFINE_LGLOCK(name) +#define DEFINE_BRLOCK(name) DEFINE_LGLOCK(name) +#define DEFINE_STATIC_BRLOCK(name) DEFINE_STATIC_LGLOCK(name) #ifdef CONFIG_DEBUG_LOCK_ALLOC #define LOCKDEP_INIT_MAP lockdep_init_map - -#define DEFINE_LGLOCK_LOCKDEP(name) \ - struct lock_class_key name##_lock_key; \ - struct lockdep_map name##_lock_dep_map; \ - EXPORT_SYMBOL(name##_lock_dep_map) - #else #define LOCKDEP_INIT_MAP(a, b, c, d) - -#define DEFINE_LGLOCK_LOCKDEP(name) #endif struct lglock { @@ -57,11 +50,15 @@ struct lglock { }; #define DEFINE_LGLOCK(name) \ - DEFINE_LGLOCK_LOCKDEP(name); \ - DEFINE_PER_CPU(arch_spinlock_t, name ## _lock) \ + static DEFINE_PER_CPU(arch_spinlock_t, name ## _lock) \ = __ARCH_SPIN_LOCK_UNLOCKED; \ struct lglock name = { .lock = &name ## _lock } +#define DEFINE_STATIC_LGLOCK(name) \ + static DEFINE_PER_CPU(arch_spinlock_t, name ## _lock) \ + = __ARCH_SPIN_LOCK_UNLOCKED; \ + static struct lglock name = { .lock = &name ## _lock } + void lg_lock_init(struct lglock *lg, char *name); void lg_local_lock(struct lglock *lg); void lg_local_unlock(struct lglock *lg); diff --git a/include/linux/llc.h b/include/linux/llc.h index a2418ae13ee..b965314d017 100644 --- a/include/linux/llc.h +++ b/include/linux/llc.h @@ -1,5 +1,3 @@ -#ifndef __LINUX_LLC_H -#define __LINUX_LLC_H /* * IEEE 802.2 User Interface SAPs for Linux, data structures and indicators. * @@ -12,80 +10,14 @@ * * See the GNU General Public License for more details. */ +#ifndef __LINUX_LLC_H +#define __LINUX_LLC_H -#include <linux/socket.h> - -#define __LLC_SOCK_SIZE__ 16 /* sizeof(sockaddr_llc), word align. */ -struct sockaddr_llc { - __kernel_sa_family_t sllc_family; /* AF_LLC */ - __kernel_sa_family_t sllc_arphrd; /* ARPHRD_ETHER */ - unsigned char sllc_test; - unsigned char sllc_xid; - unsigned char sllc_ua; /* UA data, only for SOCK_STREAM. */ - unsigned char sllc_sap; - unsigned char sllc_mac[IFHWADDRLEN]; - unsigned char __pad[__LLC_SOCK_SIZE__ - - sizeof(__kernel_sa_family_t) * 2 - - sizeof(unsigned char) * 4 - IFHWADDRLEN]; -}; - -/* sockopt definitions. */ -enum llc_sockopts { - LLC_OPT_UNKNOWN = 0, - LLC_OPT_RETRY, /* max retrans attempts. */ - LLC_OPT_SIZE, /* max PDU size (octets). */ - LLC_OPT_ACK_TMR_EXP, /* ack expire time (secs). */ - LLC_OPT_P_TMR_EXP, /* pf cycle expire time (secs). */ - LLC_OPT_REJ_TMR_EXP, /* rej sent expire time (secs). */ - LLC_OPT_BUSY_TMR_EXP, /* busy state expire time (secs). */ - LLC_OPT_TX_WIN, /* tx window size. */ - LLC_OPT_RX_WIN, /* rx window size. */ - LLC_OPT_PKTINFO, /* ancillary packet information. */ - LLC_OPT_MAX -}; - -#define LLC_OPT_MAX_RETRY 100 -#define LLC_OPT_MAX_SIZE 4196 -#define LLC_OPT_MAX_WIN 127 -#define LLC_OPT_MAX_ACK_TMR_EXP 60 -#define LLC_OPT_MAX_P_TMR_EXP 60 -#define LLC_OPT_MAX_REJ_TMR_EXP 60 -#define LLC_OPT_MAX_BUSY_TMR_EXP 60 - -/* LLC SAP types. */ -#define LLC_SAP_NULL 0x00 /* NULL SAP. */ -#define LLC_SAP_LLC 0x02 /* LLC Sublayer Management. */ -#define LLC_SAP_SNA 0x04 /* SNA Path Control. */ -#define LLC_SAP_PNM 0x0E /* Proway Network Management. */ -#define LLC_SAP_IP 0x06 /* TCP/IP. */ -#define LLC_SAP_BSPAN 0x42 /* Bridge Spanning Tree Proto */ -#define LLC_SAP_MMS 0x4E /* Manufacturing Message Srv. */ -#define LLC_SAP_8208 0x7E /* ISO 8208 */ -#define LLC_SAP_3COM 0x80 /* 3COM. */ -#define LLC_SAP_PRO 0x8E /* Proway Active Station List */ -#define LLC_SAP_SNAP 0xAA /* SNAP. */ -#define LLC_SAP_BANYAN 0xBC /* Banyan. */ -#define LLC_SAP_IPX 0xE0 /* IPX/SPX. */ -#define LLC_SAP_NETBEUI 0xF0 /* NetBEUI. */ -#define LLC_SAP_LANMGR 0xF4 /* LanManager. */ -#define LLC_SAP_IMPL 0xF8 /* IMPL */ -#define LLC_SAP_DISC 0xFC /* Discovery */ -#define LLC_SAP_OSI 0xFE /* OSI Network Layers. */ -#define LLC_SAP_LAR 0xDC /* LAN Address Resolution */ -#define LLC_SAP_RM 0xD4 /* Resource Management */ -#define LLC_SAP_GLOBAL 0xFF /* Global SAP. */ - -struct llc_pktinfo { - int lpi_ifindex; - unsigned char lpi_sap; - unsigned char lpi_mac[IFHWADDRLEN]; -}; +#include <uapi/linux/llc.h> -#ifdef __KERNEL__ #define LLC_SAP_DYN_START 0xC0 #define LLC_SAP_DYN_STOP 0xDE #define LLC_SAP_DYN_TRIES 4 #define llc_ui_skb_cb(__skb) ((struct sockaddr_llc *)&((__skb)->cb[0])) -#endif /* __KERNEL__ */ #endif /* __LINUX_LLC_H */ diff --git a/include/linux/loop.h b/include/linux/loop.h index 9635116dd83..6492181bcb1 100644 --- a/include/linux/loop.h +++ b/include/linux/loop.h @@ -1,6 +1,3 @@ -#ifndef _LINUX_LOOP_H -#define _LINUX_LOOP_H - /* * include/linux/loop.h * @@ -9,15 +6,14 @@ * Copyright 1993 by Theodore Ts'o. Redistribution of this file is * permitted under the GNU General Public License. */ +#ifndef _LINUX_LOOP_H +#define _LINUX_LOOP_H -#define LO_NAME_SIZE 64 -#define LO_KEY_SIZE 32 - -#ifdef __KERNEL__ #include <linux/bio.h> #include <linux/blkdev.h> #include <linux/spinlock.h> #include <linux/mutex.h> +#include <uapi/linux/loop.h> /* Possible states of device */ enum { @@ -66,69 +62,6 @@ struct loop_device { struct gendisk *lo_disk; }; -#endif /* __KERNEL__ */ - -/* - * Loop flags - */ -enum { - LO_FLAGS_READ_ONLY = 1, - LO_FLAGS_AUTOCLEAR = 4, - LO_FLAGS_PARTSCAN = 8, -}; - -#include <asm/posix_types.h> /* for __kernel_old_dev_t */ -#include <linux/types.h> /* for __u64 */ - -/* Backwards compatibility version */ -struct loop_info { - int lo_number; /* ioctl r/o */ - __kernel_old_dev_t lo_device; /* ioctl r/o */ - unsigned long lo_inode; /* ioctl r/o */ - __kernel_old_dev_t lo_rdevice; /* ioctl r/o */ - int lo_offset; - int lo_encrypt_type; - int lo_encrypt_key_size; /* ioctl w/o */ - int lo_flags; /* ioctl r/o */ - char lo_name[LO_NAME_SIZE]; - unsigned char lo_encrypt_key[LO_KEY_SIZE]; /* ioctl w/o */ - unsigned long lo_init[2]; - char reserved[4]; -}; - -struct loop_info64 { - __u64 lo_device; /* ioctl r/o */ - __u64 lo_inode; /* ioctl r/o */ - __u64 lo_rdevice; /* ioctl r/o */ - __u64 lo_offset; - __u64 lo_sizelimit;/* bytes, 0 == max available */ - __u32 lo_number; /* ioctl r/o */ - __u32 lo_encrypt_type; - __u32 lo_encrypt_key_size; /* ioctl w/o */ - __u32 lo_flags; /* ioctl r/o */ - __u8 lo_file_name[LO_NAME_SIZE]; - __u8 lo_crypt_name[LO_NAME_SIZE]; - __u8 lo_encrypt_key[LO_KEY_SIZE]; /* ioctl w/o */ - __u64 lo_init[2]; -}; - -/* - * Loop filter types - */ - -#define LO_CRYPT_NONE 0 -#define LO_CRYPT_XOR 1 -#define LO_CRYPT_DES 2 -#define LO_CRYPT_FISH2 3 /* Twofish encryption */ -#define LO_CRYPT_BLOW 4 -#define LO_CRYPT_CAST128 5 -#define LO_CRYPT_IDEA 6 -#define LO_CRYPT_DUMMY 9 -#define LO_CRYPT_SKIPJACK 10 -#define LO_CRYPT_CRYPTOAPI 18 -#define MAX_LO_CRYPT 20 - -#ifdef __KERNEL__ /* Support for loadable transfer modules */ struct loop_func_table { int number; /* filter type */ @@ -147,21 +80,3 @@ int loop_register_transfer(struct loop_func_table *funcs); int loop_unregister_transfer(int number); #endif -/* - * IOCTL commands --- we will commandeer 0x4C ('L') - */ - -#define LOOP_SET_FD 0x4C00 -#define LOOP_CLR_FD 0x4C01 -#define LOOP_SET_STATUS 0x4C02 -#define LOOP_GET_STATUS 0x4C03 -#define LOOP_SET_STATUS64 0x4C04 -#define LOOP_GET_STATUS64 0x4C05 -#define LOOP_CHANGE_FD 0x4C06 -#define LOOP_SET_CAPACITY 0x4C07 - -/* /dev/loop-control interface */ -#define LOOP_CTL_ADD 0x4C80 -#define LOOP_CTL_REMOVE 0x4C81 -#define LOOP_CTL_GET_FREE 0x4C82 -#endif diff --git a/include/linux/lp.h b/include/linux/lp.h index 0df024bfd6f..0dd276af9e4 100644 --- a/include/linux/lp.h +++ b/include/linux/lp.h @@ -1,105 +1,16 @@ -#ifndef _LINUX_LP_H -#define _LINUX_LP_H - /* * usr/include/linux/lp.h c.1991-1992 James Wiegand * many modifications copyright (C) 1992 Michael K. Johnson * Interrupt support added 1993 Nigel Gamble * Removed 8255 status defines from inside __KERNEL__ Marcelo Tosatti */ +#ifndef _LINUX_LP_H +#define _LINUX_LP_H -/* - * Per POSIX guidelines, this module reserves the LP and lp prefixes - * These are the lp_table[minor].flags flags... - */ -#define LP_EXIST 0x0001 -#define LP_SELEC 0x0002 -#define LP_BUSY 0x0004 -#define LP_BUSY_BIT_POS 2 -#define LP_OFFL 0x0008 -#define LP_NOPA 0x0010 -#define LP_ERR 0x0020 -#define LP_ABORT 0x0040 -#define LP_CAREFUL 0x0080 /* obsoleted -arca */ -#define LP_ABORTOPEN 0x0100 - -#define LP_TRUST_IRQ_ 0x0200 /* obsolete */ -#define LP_NO_REVERSE 0x0400 /* No reverse mode available. */ -#define LP_DATA_AVAIL 0x0800 /* Data is available. */ - -/* - * bit defines for 8255 status port - * base + 1 - * accessed with LP_S(minor), which gets the byte... - */ -#define LP_PBUSY 0x80 /* inverted input, active high */ -#define LP_PACK 0x40 /* unchanged input, active low */ -#define LP_POUTPA 0x20 /* unchanged input, active high */ -#define LP_PSELECD 0x10 /* unchanged input, active high */ -#define LP_PERRORP 0x08 /* unchanged input, active low */ - -/* timeout for each character. This is relative to bus cycles -- it - * is the count in a busy loop. THIS IS THE VALUE TO CHANGE if you - * have extremely slow printing, or if the machine seems to slow down - * a lot when you print. If you have slow printing, increase this - * number and recompile, and if your system gets bogged down, decrease - * this number. This can be changed with the tunelp(8) command as well. - */ - -#define LP_INIT_CHAR 1000 - -/* The parallel port specs apparently say that there needs to be - * a .5usec wait before and after the strobe. - */ - -#define LP_INIT_WAIT 1 - -/* This is the amount of time that the driver waits for the printer to - * catch up when the printer's buffer appears to be filled. If you - * want to tune this and have a fast printer (i.e. HPIIIP), decrease - * this number, and if you have a slow printer, increase this number. - * This is in hundredths of a second, the default 2 being .05 second. - * Or use the tunelp(8) command, which is especially nice if you want - * change back and forth between character and graphics printing, which - * are wildly different... - */ - -#define LP_INIT_TIME 2 - -/* IOCTL numbers */ -#define LPCHAR 0x0601 /* corresponds to LP_INIT_CHAR */ -#define LPTIME 0x0602 /* corresponds to LP_INIT_TIME */ -#define LPABORT 0x0604 /* call with TRUE arg to abort on error, - FALSE to retry. Default is retry. */ -#define LPSETIRQ 0x0605 /* call with new IRQ number, - or 0 for polling (no IRQ) */ -#define LPGETIRQ 0x0606 /* get the current IRQ number */ -#define LPWAIT 0x0608 /* corresponds to LP_INIT_WAIT */ -/* NOTE: LPCAREFUL is obsoleted and it' s always the default right now -arca */ -#define LPCAREFUL 0x0609 /* call with TRUE arg to require out-of-paper, off- - line, and error indicators good on all writes, - FALSE to ignore them. Default is ignore. */ -#define LPABORTOPEN 0x060a /* call with TRUE arg to abort open() on error, - FALSE to ignore error. Default is ignore. */ -#define LPGETSTATUS 0x060b /* return LP_S(minor) */ -#define LPRESET 0x060c /* reset printer */ -#ifdef LP_STATS -#define LPGETSTATS 0x060d /* get statistics (struct lp_stats) */ -#endif -#define LPGETFLAGS 0x060e /* get status flags */ -#define LPSETTIMEOUT 0x060f /* set parport timeout */ - -/* timeout for printk'ing a timeout, in jiffies (100ths of a second). - This is also used for re-checking error conditions if LP_ABORT is - not set. This is the default behavior. */ - -#define LP_TIMEOUT_INTERRUPT (60 * HZ) -#define LP_TIMEOUT_POLLED (10 * HZ) - -#ifdef __KERNEL__ #include <linux/wait.h> #include <linux/mutex.h> +#include <uapi/linux/lp.h> /* Magic numbers for defining port-device mappings */ #define LP_PARPORT_UNSPEC -4 @@ -187,5 +98,3 @@ struct lp_struct { #define LP_DELAY 50 #endif - -#endif diff --git a/include/linux/mdio.h b/include/linux/mdio.h index 6c406845f7e..3d15c838116 100644 --- a/include/linux/mdio.h +++ b/include/linux/mdio.h @@ -6,295 +6,11 @@ * under the terms of the GNU General Public License version 2 as published * by the Free Software Foundation, incorporated herein by reference. */ - #ifndef __LINUX_MDIO_H__ #define __LINUX_MDIO_H__ -#include <linux/types.h> -#include <linux/mii.h> - -/* MDIO Manageable Devices (MMDs). */ -#define MDIO_MMD_PMAPMD 1 /* Physical Medium Attachment/ - * Physical Medium Dependent */ -#define MDIO_MMD_WIS 2 /* WAN Interface Sublayer */ -#define MDIO_MMD_PCS 3 /* Physical Coding Sublayer */ -#define MDIO_MMD_PHYXS 4 /* PHY Extender Sublayer */ -#define MDIO_MMD_DTEXS 5 /* DTE Extender Sublayer */ -#define MDIO_MMD_TC 6 /* Transmission Convergence */ -#define MDIO_MMD_AN 7 /* Auto-Negotiation */ -#define MDIO_MMD_C22EXT 29 /* Clause 22 extension */ -#define MDIO_MMD_VEND1 30 /* Vendor specific 1 */ -#define MDIO_MMD_VEND2 31 /* Vendor specific 2 */ - -/* Generic MDIO registers. */ -#define MDIO_CTRL1 MII_BMCR -#define MDIO_STAT1 MII_BMSR -#define MDIO_DEVID1 MII_PHYSID1 -#define MDIO_DEVID2 MII_PHYSID2 -#define MDIO_SPEED 4 /* Speed ability */ -#define MDIO_DEVS1 5 /* Devices in package */ -#define MDIO_DEVS2 6 -#define MDIO_CTRL2 7 /* 10G control 2 */ -#define MDIO_STAT2 8 /* 10G status 2 */ -#define MDIO_PMA_TXDIS 9 /* 10G PMA/PMD transmit disable */ -#define MDIO_PMA_RXDET 10 /* 10G PMA/PMD receive signal detect */ -#define MDIO_PMA_EXTABLE 11 /* 10G PMA/PMD extended ability */ -#define MDIO_PKGID1 14 /* Package identifier */ -#define MDIO_PKGID2 15 -#define MDIO_AN_ADVERTISE 16 /* AN advertising (base page) */ -#define MDIO_AN_LPA 19 /* AN LP abilities (base page) */ -#define MDIO_PCS_EEE_ABLE 20 /* EEE Capability register */ -#define MDIO_PCS_EEE_WK_ERR 22 /* EEE wake error counter */ -#define MDIO_PHYXS_LNSTAT 24 /* PHY XGXS lane state */ -#define MDIO_AN_EEE_ADV 60 /* EEE advertisement */ -#define MDIO_AN_EEE_LPABLE 61 /* EEE link partner ability */ - -/* Media-dependent registers. */ -#define MDIO_PMA_10GBT_SWAPPOL 130 /* 10GBASE-T pair swap & polarity */ -#define MDIO_PMA_10GBT_TXPWR 131 /* 10GBASE-T TX power control */ -#define MDIO_PMA_10GBT_SNR 133 /* 10GBASE-T SNR margin, lane A. - * Lanes B-D are numbered 134-136. */ -#define MDIO_PMA_10GBR_FECABLE 170 /* 10GBASE-R FEC ability */ -#define MDIO_PCS_10GBX_STAT1 24 /* 10GBASE-X PCS status 1 */ -#define MDIO_PCS_10GBRT_STAT1 32 /* 10GBASE-R/-T PCS status 1 */ -#define MDIO_PCS_10GBRT_STAT2 33 /* 10GBASE-R/-T PCS status 2 */ -#define MDIO_AN_10GBT_CTRL 32 /* 10GBASE-T auto-negotiation control */ -#define MDIO_AN_10GBT_STAT 33 /* 10GBASE-T auto-negotiation status */ - -/* LASI (Link Alarm Status Interrupt) registers, defined by XENPAK MSA. */ -#define MDIO_PMA_LASI_RXCTRL 0x9000 /* RX_ALARM control */ -#define MDIO_PMA_LASI_TXCTRL 0x9001 /* TX_ALARM control */ -#define MDIO_PMA_LASI_CTRL 0x9002 /* LASI control */ -#define MDIO_PMA_LASI_RXSTAT 0x9003 /* RX_ALARM status */ -#define MDIO_PMA_LASI_TXSTAT 0x9004 /* TX_ALARM status */ -#define MDIO_PMA_LASI_STAT 0x9005 /* LASI status */ - -/* Control register 1. */ -/* Enable extended speed selection */ -#define MDIO_CTRL1_SPEEDSELEXT (BMCR_SPEED1000 | BMCR_SPEED100) -/* All speed selection bits */ -#define MDIO_CTRL1_SPEEDSEL (MDIO_CTRL1_SPEEDSELEXT | 0x003c) -#define MDIO_CTRL1_FULLDPLX BMCR_FULLDPLX -#define MDIO_CTRL1_LPOWER BMCR_PDOWN -#define MDIO_CTRL1_RESET BMCR_RESET -#define MDIO_PMA_CTRL1_LOOPBACK 0x0001 -#define MDIO_PMA_CTRL1_SPEED1000 BMCR_SPEED1000 -#define MDIO_PMA_CTRL1_SPEED100 BMCR_SPEED100 -#define MDIO_PCS_CTRL1_LOOPBACK BMCR_LOOPBACK -#define MDIO_PHYXS_CTRL1_LOOPBACK BMCR_LOOPBACK -#define MDIO_AN_CTRL1_RESTART BMCR_ANRESTART -#define MDIO_AN_CTRL1_ENABLE BMCR_ANENABLE -#define MDIO_AN_CTRL1_XNP 0x2000 /* Enable extended next page */ -#define MDIO_PCS_CTRL1_CLKSTOP_EN 0x400 /* Stop the clock during LPI */ - -/* 10 Gb/s */ -#define MDIO_CTRL1_SPEED10G (MDIO_CTRL1_SPEEDSELEXT | 0x00) -/* 10PASS-TS/2BASE-TL */ -#define MDIO_CTRL1_SPEED10P2B (MDIO_CTRL1_SPEEDSELEXT | 0x04) - -/* Status register 1. */ -#define MDIO_STAT1_LPOWERABLE 0x0002 /* Low-power ability */ -#define MDIO_STAT1_LSTATUS BMSR_LSTATUS -#define MDIO_STAT1_FAULT 0x0080 /* Fault */ -#define MDIO_AN_STAT1_LPABLE 0x0001 /* Link partner AN ability */ -#define MDIO_AN_STAT1_ABLE BMSR_ANEGCAPABLE -#define MDIO_AN_STAT1_RFAULT BMSR_RFAULT -#define MDIO_AN_STAT1_COMPLETE BMSR_ANEGCOMPLETE -#define MDIO_AN_STAT1_PAGE 0x0040 /* Page received */ -#define MDIO_AN_STAT1_XNP 0x0080 /* Extended next page status */ - -/* Speed register. */ -#define MDIO_SPEED_10G 0x0001 /* 10G capable */ -#define MDIO_PMA_SPEED_2B 0x0002 /* 2BASE-TL capable */ -#define MDIO_PMA_SPEED_10P 0x0004 /* 10PASS-TS capable */ -#define MDIO_PMA_SPEED_1000 0x0010 /* 1000M capable */ -#define MDIO_PMA_SPEED_100 0x0020 /* 100M capable */ -#define MDIO_PMA_SPEED_10 0x0040 /* 10M capable */ -#define MDIO_PCS_SPEED_10P2B 0x0002 /* 10PASS-TS/2BASE-TL capable */ - -/* Device present registers. */ -#define MDIO_DEVS_PRESENT(devad) (1 << (devad)) -#define MDIO_DEVS_PMAPMD MDIO_DEVS_PRESENT(MDIO_MMD_PMAPMD) -#define MDIO_DEVS_WIS MDIO_DEVS_PRESENT(MDIO_MMD_WIS) -#define MDIO_DEVS_PCS MDIO_DEVS_PRESENT(MDIO_MMD_PCS) -#define MDIO_DEVS_PHYXS MDIO_DEVS_PRESENT(MDIO_MMD_PHYXS) -#define MDIO_DEVS_DTEXS MDIO_DEVS_PRESENT(MDIO_MMD_DTEXS) -#define MDIO_DEVS_TC MDIO_DEVS_PRESENT(MDIO_MMD_TC) -#define MDIO_DEVS_AN MDIO_DEVS_PRESENT(MDIO_MMD_AN) -#define MDIO_DEVS_C22EXT MDIO_DEVS_PRESENT(MDIO_MMD_C22EXT) - -/* Control register 2. */ -#define MDIO_PMA_CTRL2_TYPE 0x000f /* PMA/PMD type selection */ -#define MDIO_PMA_CTRL2_10GBCX4 0x0000 /* 10GBASE-CX4 type */ -#define MDIO_PMA_CTRL2_10GBEW 0x0001 /* 10GBASE-EW type */ -#define MDIO_PMA_CTRL2_10GBLW 0x0002 /* 10GBASE-LW type */ -#define MDIO_PMA_CTRL2_10GBSW 0x0003 /* 10GBASE-SW type */ -#define MDIO_PMA_CTRL2_10GBLX4 0x0004 /* 10GBASE-LX4 type */ -#define MDIO_PMA_CTRL2_10GBER 0x0005 /* 10GBASE-ER type */ -#define MDIO_PMA_CTRL2_10GBLR 0x0006 /* 10GBASE-LR type */ -#define MDIO_PMA_CTRL2_10GBSR 0x0007 /* 10GBASE-SR type */ -#define MDIO_PMA_CTRL2_10GBLRM 0x0008 /* 10GBASE-LRM type */ -#define MDIO_PMA_CTRL2_10GBT 0x0009 /* 10GBASE-T type */ -#define MDIO_PMA_CTRL2_10GBKX4 0x000a /* 10GBASE-KX4 type */ -#define MDIO_PMA_CTRL2_10GBKR 0x000b /* 10GBASE-KR type */ -#define MDIO_PMA_CTRL2_1000BT 0x000c /* 1000BASE-T type */ -#define MDIO_PMA_CTRL2_1000BKX 0x000d /* 1000BASE-KX type */ -#define MDIO_PMA_CTRL2_100BTX 0x000e /* 100BASE-TX type */ -#define MDIO_PMA_CTRL2_10BT 0x000f /* 10BASE-T type */ -#define MDIO_PCS_CTRL2_TYPE 0x0003 /* PCS type selection */ -#define MDIO_PCS_CTRL2_10GBR 0x0000 /* 10GBASE-R type */ -#define MDIO_PCS_CTRL2_10GBX 0x0001 /* 10GBASE-X type */ -#define MDIO_PCS_CTRL2_10GBW 0x0002 /* 10GBASE-W type */ -#define MDIO_PCS_CTRL2_10GBT 0x0003 /* 10GBASE-T type */ - -/* Status register 2. */ -#define MDIO_STAT2_RXFAULT 0x0400 /* Receive fault */ -#define MDIO_STAT2_TXFAULT 0x0800 /* Transmit fault */ -#define MDIO_STAT2_DEVPRST 0xc000 /* Device present */ -#define MDIO_STAT2_DEVPRST_VAL 0x8000 /* Device present value */ -#define MDIO_PMA_STAT2_LBABLE 0x0001 /* PMA loopback ability */ -#define MDIO_PMA_STAT2_10GBEW 0x0002 /* 10GBASE-EW ability */ -#define MDIO_PMA_STAT2_10GBLW 0x0004 /* 10GBASE-LW ability */ -#define MDIO_PMA_STAT2_10GBSW 0x0008 /* 10GBASE-SW ability */ -#define MDIO_PMA_STAT2_10GBLX4 0x0010 /* 10GBASE-LX4 ability */ -#define MDIO_PMA_STAT2_10GBER 0x0020 /* 10GBASE-ER ability */ -#define MDIO_PMA_STAT2_10GBLR 0x0040 /* 10GBASE-LR ability */ -#define MDIO_PMA_STAT2_10GBSR 0x0080 /* 10GBASE-SR ability */ -#define MDIO_PMD_STAT2_TXDISAB 0x0100 /* PMD TX disable ability */ -#define MDIO_PMA_STAT2_EXTABLE 0x0200 /* Extended abilities */ -#define MDIO_PMA_STAT2_RXFLTABLE 0x1000 /* Receive fault ability */ -#define MDIO_PMA_STAT2_TXFLTABLE 0x2000 /* Transmit fault ability */ -#define MDIO_PCS_STAT2_10GBR 0x0001 /* 10GBASE-R capable */ -#define MDIO_PCS_STAT2_10GBX 0x0002 /* 10GBASE-X capable */ -#define MDIO_PCS_STAT2_10GBW 0x0004 /* 10GBASE-W capable */ -#define MDIO_PCS_STAT2_RXFLTABLE 0x1000 /* Receive fault ability */ -#define MDIO_PCS_STAT2_TXFLTABLE 0x2000 /* Transmit fault ability */ - -/* Transmit disable register. */ -#define MDIO_PMD_TXDIS_GLOBAL 0x0001 /* Global PMD TX disable */ -#define MDIO_PMD_TXDIS_0 0x0002 /* PMD TX disable 0 */ -#define MDIO_PMD_TXDIS_1 0x0004 /* PMD TX disable 1 */ -#define MDIO_PMD_TXDIS_2 0x0008 /* PMD TX disable 2 */ -#define MDIO_PMD_TXDIS_3 0x0010 /* PMD TX disable 3 */ - -/* Receive signal detect register. */ -#define MDIO_PMD_RXDET_GLOBAL 0x0001 /* Global PMD RX signal detect */ -#define MDIO_PMD_RXDET_0 0x0002 /* PMD RX signal detect 0 */ -#define MDIO_PMD_RXDET_1 0x0004 /* PMD RX signal detect 1 */ -#define MDIO_PMD_RXDET_2 0x0008 /* PMD RX signal detect 2 */ -#define MDIO_PMD_RXDET_3 0x0010 /* PMD RX signal detect 3 */ - -/* Extended abilities register. */ -#define MDIO_PMA_EXTABLE_10GCX4 0x0001 /* 10GBASE-CX4 ability */ -#define MDIO_PMA_EXTABLE_10GBLRM 0x0002 /* 10GBASE-LRM ability */ -#define MDIO_PMA_EXTABLE_10GBT 0x0004 /* 10GBASE-T ability */ -#define MDIO_PMA_EXTABLE_10GBKX4 0x0008 /* 10GBASE-KX4 ability */ -#define MDIO_PMA_EXTABLE_10GBKR 0x0010 /* 10GBASE-KR ability */ -#define MDIO_PMA_EXTABLE_1000BT 0x0020 /* 1000BASE-T ability */ -#define MDIO_PMA_EXTABLE_1000BKX 0x0040 /* 1000BASE-KX ability */ -#define MDIO_PMA_EXTABLE_100BTX 0x0080 /* 100BASE-TX ability */ -#define MDIO_PMA_EXTABLE_10BT 0x0100 /* 10BASE-T ability */ - -/* PHY XGXS lane state register. */ -#define MDIO_PHYXS_LNSTAT_SYNC0 0x0001 -#define MDIO_PHYXS_LNSTAT_SYNC1 0x0002 -#define MDIO_PHYXS_LNSTAT_SYNC2 0x0004 -#define MDIO_PHYXS_LNSTAT_SYNC3 0x0008 -#define MDIO_PHYXS_LNSTAT_ALIGN 0x1000 - -/* PMA 10GBASE-T pair swap & polarity */ -#define MDIO_PMA_10GBT_SWAPPOL_ABNX 0x0001 /* Pair A/B uncrossed */ -#define MDIO_PMA_10GBT_SWAPPOL_CDNX 0x0002 /* Pair C/D uncrossed */ -#define MDIO_PMA_10GBT_SWAPPOL_AREV 0x0100 /* Pair A polarity reversed */ -#define MDIO_PMA_10GBT_SWAPPOL_BREV 0x0200 /* Pair B polarity reversed */ -#define MDIO_PMA_10GBT_SWAPPOL_CREV 0x0400 /* Pair C polarity reversed */ -#define MDIO_PMA_10GBT_SWAPPOL_DREV 0x0800 /* Pair D polarity reversed */ - -/* PMA 10GBASE-T TX power register. */ -#define MDIO_PMA_10GBT_TXPWR_SHORT 0x0001 /* Short-reach mode */ - -/* PMA 10GBASE-T SNR registers. */ -/* Value is SNR margin in dB, clamped to range [-127, 127], plus 0x8000. */ -#define MDIO_PMA_10GBT_SNR_BIAS 0x8000 -#define MDIO_PMA_10GBT_SNR_MAX 127 - -/* PMA 10GBASE-R FEC ability register. */ -#define MDIO_PMA_10GBR_FECABLE_ABLE 0x0001 /* FEC ability */ -#define MDIO_PMA_10GBR_FECABLE_ERRABLE 0x0002 /* FEC error indic. ability */ - -/* PCS 10GBASE-R/-T status register 1. */ -#define MDIO_PCS_10GBRT_STAT1_BLKLK 0x0001 /* Block lock attained */ - -/* PCS 10GBASE-R/-T status register 2. */ -#define MDIO_PCS_10GBRT_STAT2_ERR 0x00ff -#define MDIO_PCS_10GBRT_STAT2_BER 0x3f00 - -/* AN 10GBASE-T control register. */ -#define MDIO_AN_10GBT_CTRL_ADV10G 0x1000 /* Advertise 10GBASE-T */ - -/* AN 10GBASE-T status register. */ -#define MDIO_AN_10GBT_STAT_LPTRR 0x0200 /* LP training reset req. */ -#define MDIO_AN_10GBT_STAT_LPLTABLE 0x0400 /* LP loop timing ability */ -#define MDIO_AN_10GBT_STAT_LP10G 0x0800 /* LP is 10GBT capable */ -#define MDIO_AN_10GBT_STAT_REMOK 0x1000 /* Remote OK */ -#define MDIO_AN_10GBT_STAT_LOCOK 0x2000 /* Local OK */ -#define MDIO_AN_10GBT_STAT_MS 0x4000 /* Master/slave config */ -#define MDIO_AN_10GBT_STAT_MSFLT 0x8000 /* Master/slave config fault */ - -/* EEE Supported/Advertisement/LP Advertisement registers. - * - * EEE capability Register (3.20), Advertisement (7.60) and - * Link partner ability (7.61) registers have and can use the same identical - * bit masks. - */ -#define MDIO_AN_EEE_ADV_100TX 0x0002 /* Advertise 100TX EEE cap */ -#define MDIO_AN_EEE_ADV_1000T 0x0004 /* Advertise 1000T EEE cap */ -/* Note: the two defines above can be potentially used by the user-land - * and cannot remove them now. - * So, we define the new generic MDIO_EEE_100TX and MDIO_EEE_1000T macros - * using the previous ones (that can be considered obsolete). - */ -#define MDIO_EEE_100TX MDIO_AN_EEE_ADV_100TX /* 100TX EEE cap */ -#define MDIO_EEE_1000T MDIO_AN_EEE_ADV_1000T /* 1000T EEE cap */ -#define MDIO_EEE_10GT 0x0008 /* 10GT EEE cap */ -#define MDIO_EEE_1000KX 0x0010 /* 1000KX EEE cap */ -#define MDIO_EEE_10GKX4 0x0020 /* 10G KX4 EEE cap */ -#define MDIO_EEE_10GKR 0x0040 /* 10G KR EEE cap */ - -/* LASI RX_ALARM control/status registers. */ -#define MDIO_PMA_LASI_RX_PHYXSLFLT 0x0001 /* PHY XS RX local fault */ -#define MDIO_PMA_LASI_RX_PCSLFLT 0x0008 /* PCS RX local fault */ -#define MDIO_PMA_LASI_RX_PMALFLT 0x0010 /* PMA/PMD RX local fault */ -#define MDIO_PMA_LASI_RX_OPTICPOWERFLT 0x0020 /* RX optical power fault */ -#define MDIO_PMA_LASI_RX_WISLFLT 0x0200 /* WIS local fault */ - -/* LASI TX_ALARM control/status registers. */ -#define MDIO_PMA_LASI_TX_PHYXSLFLT 0x0001 /* PHY XS TX local fault */ -#define MDIO_PMA_LASI_TX_PCSLFLT 0x0008 /* PCS TX local fault */ -#define MDIO_PMA_LASI_TX_PMALFLT 0x0010 /* PMA/PMD TX local fault */ -#define MDIO_PMA_LASI_TX_LASERPOWERFLT 0x0080 /* Laser output power fault */ -#define MDIO_PMA_LASI_TX_LASERTEMPFLT 0x0100 /* Laser temperature fault */ -#define MDIO_PMA_LASI_TX_LASERBICURRFLT 0x0200 /* Laser bias current fault */ - -/* LASI control/status registers. */ -#define MDIO_PMA_LASI_LSALARM 0x0001 /* LS_ALARM enable/status */ -#define MDIO_PMA_LASI_TXALARM 0x0002 /* TX_ALARM enable/status */ -#define MDIO_PMA_LASI_RXALARM 0x0004 /* RX_ALARM enable/status */ - -/* Mapping between MDIO PRTAD/DEVAD and mii_ioctl_data::phy_id */ - -#define MDIO_PHY_ID_C45 0x8000 -#define MDIO_PHY_ID_PRTAD 0x03e0 -#define MDIO_PHY_ID_DEVAD 0x001f -#define MDIO_PHY_ID_C45_MASK \ - (MDIO_PHY_ID_C45 | MDIO_PHY_ID_PRTAD | MDIO_PHY_ID_DEVAD) - -static inline __u16 mdio_phy_id_c45(int prtad, int devad) -{ - return MDIO_PHY_ID_C45 | (prtad << 5) | devad; -} +#include <uapi/linux/mdio.h> -#ifdef __KERNEL__ static inline bool mdio_phy_id_is_c45(int phy_id) { @@ -460,5 +176,4 @@ static inline u16 ethtool_adv_to_mmd_eee_adv_t(u32 adv) return reg; } -#endif /* __KERNEL__ */ #endif /* __LINUX_MDIO_H__ */ diff --git a/include/linux/mempolicy.h b/include/linux/mempolicy.h index cec56932560..e5ccb9ddd90 100644 --- a/include/linux/mempolicy.h +++ b/include/linux/mempolicy.h @@ -1,66 +1,10 @@ -#ifndef _LINUX_MEMPOLICY_H -#define _LINUX_MEMPOLICY_H 1 - -#include <linux/errno.h> - /* * NUMA memory policies for Linux. * Copyright 2003,2004 Andi Kleen SuSE Labs */ +#ifndef _LINUX_MEMPOLICY_H +#define _LINUX_MEMPOLICY_H 1 -/* - * Both the MPOL_* mempolicy mode and the MPOL_F_* optional mode flags are - * passed by the user to either set_mempolicy() or mbind() in an 'int' actual. - * The MPOL_MODE_FLAGS macro determines the legal set of optional mode flags. - */ - -/* Policies */ -enum { - MPOL_DEFAULT, - MPOL_PREFERRED, - MPOL_BIND, - MPOL_INTERLEAVE, - MPOL_MAX, /* always last member of enum */ -}; - -enum mpol_rebind_step { - MPOL_REBIND_ONCE, /* do rebind work at once(not by two step) */ - MPOL_REBIND_STEP1, /* first step(set all the newly nodes) */ - MPOL_REBIND_STEP2, /* second step(clean all the disallowed nodes)*/ - MPOL_REBIND_NSTEP, -}; - -/* Flags for set_mempolicy */ -#define MPOL_F_STATIC_NODES (1 << 15) -#define MPOL_F_RELATIVE_NODES (1 << 14) - -/* - * MPOL_MODE_FLAGS is the union of all possible optional mode flags passed to - * either set_mempolicy() or mbind(). - */ -#define MPOL_MODE_FLAGS (MPOL_F_STATIC_NODES | MPOL_F_RELATIVE_NODES) - -/* Flags for get_mempolicy */ -#define MPOL_F_NODE (1<<0) /* return next IL mode instead of node mask */ -#define MPOL_F_ADDR (1<<1) /* look up vma using address */ -#define MPOL_F_MEMS_ALLOWED (1<<2) /* return allowed memories */ - -/* Flags for mbind */ -#define MPOL_MF_STRICT (1<<0) /* Verify existing pages in the mapping */ -#define MPOL_MF_MOVE (1<<1) /* Move pages owned by this process to conform to mapping */ -#define MPOL_MF_MOVE_ALL (1<<2) /* Move every page to conform to mapping */ -#define MPOL_MF_INTERNAL (1<<3) /* Internal flags start here */ - -/* - * Internal flags that share the struct mempolicy flags word with - * "mode flags". These flags are allocated from bit 0 up, as they - * are never OR'ed into the mode in mempolicy API arguments. - */ -#define MPOL_F_SHARED (1 << 0) /* identify shared policies */ -#define MPOL_F_LOCAL (1 << 1) /* preferred local allocation */ -#define MPOL_F_REBINDING (1 << 2) /* identify policies in rebinding */ - -#ifdef __KERNEL__ #include <linux/mmzone.h> #include <linux/slab.h> @@ -68,6 +12,7 @@ enum mpol_rebind_step { #include <linux/spinlock.h> #include <linux/nodemask.h> #include <linux/pagemap.h> +#include <uapi/linux/mempolicy.h> struct mm_struct; @@ -379,6 +324,4 @@ static inline int mpol_to_str(char *buffer, int maxlen, struct mempolicy *pol, } #endif /* CONFIG_NUMA */ -#endif /* __KERNEL__ */ - #endif diff --git a/include/linux/mii.h b/include/linux/mii.h index 8ef3a7a1159..47492c9631b 100644 --- a/include/linux/mii.h +++ b/include/linux/mii.h @@ -4,163 +4,12 @@ * * Copyright (C) 1996, 1999, 2001 David S. Miller (davem@redhat.com) */ - #ifndef __LINUX_MII_H__ #define __LINUX_MII_H__ -#include <linux/types.h> -#include <linux/ethtool.h> - -/* Generic MII registers. */ -#define MII_BMCR 0x00 /* Basic mode control register */ -#define MII_BMSR 0x01 /* Basic mode status register */ -#define MII_PHYSID1 0x02 /* PHYS ID 1 */ -#define MII_PHYSID2 0x03 /* PHYS ID 2 */ -#define MII_ADVERTISE 0x04 /* Advertisement control reg */ -#define MII_LPA 0x05 /* Link partner ability reg */ -#define MII_EXPANSION 0x06 /* Expansion register */ -#define MII_CTRL1000 0x09 /* 1000BASE-T control */ -#define MII_STAT1000 0x0a /* 1000BASE-T status */ -#define MII_MMD_CTRL 0x0d /* MMD Access Control Register */ -#define MII_MMD_DATA 0x0e /* MMD Access Data Register */ -#define MII_ESTATUS 0x0f /* Extended Status */ -#define MII_DCOUNTER 0x12 /* Disconnect counter */ -#define MII_FCSCOUNTER 0x13 /* False carrier counter */ -#define MII_NWAYTEST 0x14 /* N-way auto-neg test reg */ -#define MII_RERRCOUNTER 0x15 /* Receive error counter */ -#define MII_SREVISION 0x16 /* Silicon revision */ -#define MII_RESV1 0x17 /* Reserved... */ -#define MII_LBRERROR 0x18 /* Lpback, rx, bypass error */ -#define MII_PHYADDR 0x19 /* PHY address */ -#define MII_RESV2 0x1a /* Reserved... */ -#define MII_TPISTATUS 0x1b /* TPI status for 10mbps */ -#define MII_NCONFIG 0x1c /* Network interface config */ - -/* Basic mode control register. */ -#define BMCR_RESV 0x003f /* Unused... */ -#define BMCR_SPEED1000 0x0040 /* MSB of Speed (1000) */ -#define BMCR_CTST 0x0080 /* Collision test */ -#define BMCR_FULLDPLX 0x0100 /* Full duplex */ -#define BMCR_ANRESTART 0x0200 /* Auto negotiation restart */ -#define BMCR_ISOLATE 0x0400 /* Isolate data paths from MII */ -#define BMCR_PDOWN 0x0800 /* Enable low power state */ -#define BMCR_ANENABLE 0x1000 /* Enable auto negotiation */ -#define BMCR_SPEED100 0x2000 /* Select 100Mbps */ -#define BMCR_LOOPBACK 0x4000 /* TXD loopback bits */ -#define BMCR_RESET 0x8000 /* Reset to default state */ - -/* Basic mode status register. */ -#define BMSR_ERCAP 0x0001 /* Ext-reg capability */ -#define BMSR_JCD 0x0002 /* Jabber detected */ -#define BMSR_LSTATUS 0x0004 /* Link status */ -#define BMSR_ANEGCAPABLE 0x0008 /* Able to do auto-negotiation */ -#define BMSR_RFAULT 0x0010 /* Remote fault detected */ -#define BMSR_ANEGCOMPLETE 0x0020 /* Auto-negotiation complete */ -#define BMSR_RESV 0x00c0 /* Unused... */ -#define BMSR_ESTATEN 0x0100 /* Extended Status in R15 */ -#define BMSR_100HALF2 0x0200 /* Can do 100BASE-T2 HDX */ -#define BMSR_100FULL2 0x0400 /* Can do 100BASE-T2 FDX */ -#define BMSR_10HALF 0x0800 /* Can do 10mbps, half-duplex */ -#define BMSR_10FULL 0x1000 /* Can do 10mbps, full-duplex */ -#define BMSR_100HALF 0x2000 /* Can do 100mbps, half-duplex */ -#define BMSR_100FULL 0x4000 /* Can do 100mbps, full-duplex */ -#define BMSR_100BASE4 0x8000 /* Can do 100mbps, 4k packets */ - -/* Advertisement control register. */ -#define ADVERTISE_SLCT 0x001f /* Selector bits */ -#define ADVERTISE_CSMA 0x0001 /* Only selector supported */ -#define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */ -#define ADVERTISE_1000XFULL 0x0020 /* Try for 1000BASE-X full-duplex */ -#define ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */ -#define ADVERTISE_1000XHALF 0x0040 /* Try for 1000BASE-X half-duplex */ -#define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */ -#define ADVERTISE_1000XPAUSE 0x0080 /* Try for 1000BASE-X pause */ -#define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */ -#define ADVERTISE_1000XPSE_ASYM 0x0100 /* Try for 1000BASE-X asym pause */ -#define ADVERTISE_100BASE4 0x0200 /* Try for 100mbps 4k packets */ -#define ADVERTISE_PAUSE_CAP 0x0400 /* Try for pause */ -#define ADVERTISE_PAUSE_ASYM 0x0800 /* Try for asymetric pause */ -#define ADVERTISE_RESV 0x1000 /* Unused... */ -#define ADVERTISE_RFAULT 0x2000 /* Say we can detect faults */ -#define ADVERTISE_LPACK 0x4000 /* Ack link partners response */ -#define ADVERTISE_NPAGE 0x8000 /* Next page bit */ - -#define ADVERTISE_FULL (ADVERTISE_100FULL | ADVERTISE_10FULL | \ - ADVERTISE_CSMA) -#define ADVERTISE_ALL (ADVERTISE_10HALF | ADVERTISE_10FULL | \ - ADVERTISE_100HALF | ADVERTISE_100FULL) - -/* Link partner ability register. */ -#define LPA_SLCT 0x001f /* Same as advertise selector */ -#define LPA_10HALF 0x0020 /* Can do 10mbps half-duplex */ -#define LPA_1000XFULL 0x0020 /* Can do 1000BASE-X full-duplex */ -#define LPA_10FULL 0x0040 /* Can do 10mbps full-duplex */ -#define LPA_1000XHALF 0x0040 /* Can do 1000BASE-X half-duplex */ -#define LPA_100HALF 0x0080 /* Can do 100mbps half-duplex */ -#define LPA_1000XPAUSE 0x0080 /* Can do 1000BASE-X pause */ -#define LPA_100FULL 0x0100 /* Can do 100mbps full-duplex */ -#define LPA_1000XPAUSE_ASYM 0x0100 /* Can do 1000BASE-X pause asym*/ -#define LPA_100BASE4 0x0200 /* Can do 100mbps 4k packets */ -#define LPA_PAUSE_CAP 0x0400 /* Can pause */ -#define LPA_PAUSE_ASYM 0x0800 /* Can pause asymetrically */ -#define LPA_RESV 0x1000 /* Unused... */ -#define LPA_RFAULT 0x2000 /* Link partner faulted */ -#define LPA_LPACK 0x4000 /* Link partner acked us */ -#define LPA_NPAGE 0x8000 /* Next page bit */ - -#define LPA_DUPLEX (LPA_10FULL | LPA_100FULL) -#define LPA_100 (LPA_100FULL | LPA_100HALF | LPA_100BASE4) - -/* Expansion register for auto-negotiation. */ -#define EXPANSION_NWAY 0x0001 /* Can do N-way auto-nego */ -#define EXPANSION_LCWP 0x0002 /* Got new RX page code word */ -#define EXPANSION_ENABLENPAGE 0x0004 /* This enables npage words */ -#define EXPANSION_NPCAPABLE 0x0008 /* Link partner supports npage */ -#define EXPANSION_MFAULTS 0x0010 /* Multiple faults detected */ -#define EXPANSION_RESV 0xffe0 /* Unused... */ - -#define ESTATUS_1000_TFULL 0x2000 /* Can do 1000BT Full */ -#define ESTATUS_1000_THALF 0x1000 /* Can do 1000BT Half */ - -/* N-way test register. */ -#define NWAYTEST_RESV1 0x00ff /* Unused... */ -#define NWAYTEST_LOOPBACK 0x0100 /* Enable loopback for N-way */ -#define NWAYTEST_RESV2 0xfe00 /* Unused... */ - -/* 1000BASE-T Control register */ -#define ADVERTISE_1000FULL 0x0200 /* Advertise 1000BASE-T full duplex */ -#define ADVERTISE_1000HALF 0x0100 /* Advertise 1000BASE-T half duplex */ -#define CTL1000_AS_MASTER 0x0800 -#define CTL1000_ENABLE_MASTER 0x1000 - -/* 1000BASE-T Status register */ -#define LPA_1000LOCALRXOK 0x2000 /* Link partner local receiver status */ -#define LPA_1000REMRXOK 0x1000 /* Link partner remote receiver status */ -#define LPA_1000FULL 0x0800 /* Link partner 1000BASE-T full duplex */ -#define LPA_1000HALF 0x0400 /* Link partner 1000BASE-T half duplex */ - -/* Flow control flags */ -#define FLOW_CTRL_TX 0x01 -#define FLOW_CTRL_RX 0x02 - -/* MMD Access Control register fields */ -#define MII_MMD_CTRL_DEVAD_MASK 0x1f /* Mask MMD DEVAD*/ -#define MII_MMD_CTRL_ADDR 0x0000 /* Address */ -#define MII_MMD_CTRL_NOINCR 0x4000 /* no post increment */ -#define MII_MMD_CTRL_INCR_RDWT 0x8000 /* post increment on reads & writes */ -#define MII_MMD_CTRL_INCR_ON_WT 0xC000 /* post increment on writes only */ - -/* This structure is used in all SIOCxMIIxxx ioctl calls */ -struct mii_ioctl_data { - __u16 phy_id; - __u16 reg_num; - __u16 val_in; - __u16 val_out; -}; - -#ifdef __KERNEL__ #include <linux/if.h> +#include <uapi/linux/mii.h> struct ethtool_cmd; @@ -487,5 +336,4 @@ static inline u8 mii_resolve_flowctrl_fdx(u16 lcladv, u16 rmtadv) return cap; } -#endif /* __KERNEL__ */ #endif /* __LINUX_MII_H__ */ diff --git a/include/linux/mman.h b/include/linux/mman.h index 77cec2f45cb..d09dde1e57f 100644 --- a/include/linux/mman.h +++ b/include/linux/mman.h @@ -1,20 +1,11 @@ #ifndef _LINUX_MMAN_H #define _LINUX_MMAN_H -#include <asm/mman.h> - -#define MREMAP_MAYMOVE 1 -#define MREMAP_FIXED 2 - -#define OVERCOMMIT_GUESS 0 -#define OVERCOMMIT_ALWAYS 1 -#define OVERCOMMIT_NEVER 2 - -#ifdef __KERNEL__ #include <linux/mm.h> #include <linux/percpu_counter.h> #include <linux/atomic.h> +#include <uapi/linux/mman.h> extern int sysctl_overcommit_memory; extern int sysctl_overcommit_ratio; @@ -88,5 +79,4 @@ calc_vm_flag_bits(unsigned long flags) _calc_vm_trans(flags, MAP_DENYWRITE, VM_DENYWRITE ) | _calc_vm_trans(flags, MAP_LOCKED, VM_LOCKED ); } -#endif /* __KERNEL__ */ #endif /* _LINUX_MMAN_H */ diff --git a/include/linux/mmc/Kbuild b/include/linux/mmc/Kbuild index 1fb26448faa..e69de29bb2d 100644 --- a/include/linux/mmc/Kbuild +++ b/include/linux/mmc/Kbuild @@ -1 +0,0 @@ -header-y += ioctl.h diff --git a/include/linux/module.h b/include/linux/module.h index fbcafe2ee13..7760c6d344a 100644 --- a/include/linux/module.h +++ b/include/linux/module.h @@ -21,6 +21,9 @@ #include <linux/percpu.h> #include <asm/module.h> +/* In stripped ARM and x86-64 modules, ~ is surprisingly rare. */ +#define MODULE_SIG_STRING "~Module signature appended~\n" + /* Not Yet Implemented */ #define MODULE_SUPPORTED_DEVICE(name) @@ -260,6 +263,11 @@ struct module const unsigned long *unused_gpl_crcs; #endif +#ifdef CONFIG_MODULE_SIG + /* Signature was verified. */ + bool sig_ok; +#endif + /* symbols that will be GPL-only in the near future. */ const struct kernel_symbol *gpl_future_syms; const unsigned long *gpl_future_crcs; diff --git a/include/linux/moduleloader.h b/include/linux/moduleloader.h index b2be02ebf45..560ca53a75f 100644 --- a/include/linux/moduleloader.h +++ b/include/linux/moduleloader.h @@ -28,21 +28,49 @@ void *module_alloc(unsigned long size); /* Free memory returned from module_alloc. */ void module_free(struct module *mod, void *module_region); -/* Apply the given relocation to the (simplified) ELF. Return -error - or 0. */ +/* + * Apply the given relocation to the (simplified) ELF. Return -error + * or 0. + */ +#ifdef CONFIG_MODULES_USE_ELF_REL int apply_relocate(Elf_Shdr *sechdrs, const char *strtab, unsigned int symindex, unsigned int relsec, struct module *mod); +#else +static inline int apply_relocate(Elf_Shdr *sechdrs, + const char *strtab, + unsigned int symindex, + unsigned int relsec, + struct module *me) +{ + printk(KERN_ERR "module %s: REL relocation unsupported\n", me->name); + return -ENOEXEC; +} +#endif -/* Apply the given add relocation to the (simplified) ELF. Return - -error or 0 */ +/* + * Apply the given add relocation to the (simplified) ELF. Return + * -error or 0 + */ +#ifdef CONFIG_MODULES_USE_ELF_RELA int apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab, unsigned int symindex, unsigned int relsec, struct module *mod); +#else +static inline int apply_relocate_add(Elf_Shdr *sechdrs, + const char *strtab, + unsigned int symindex, + unsigned int relsec, + struct module *me) +{ + printk(KERN_ERR "module %s: REL relocation unsupported\n", me->name); + return -ENOEXEC; +} +#endif /* Any final processing of module before access. Return -error or 0. */ int module_finalize(const Elf_Ehdr *hdr, diff --git a/include/linux/mpi.h b/include/linux/mpi.h index d02cca6cc8c..5af1b81def4 100644 --- a/include/linux/mpi.h +++ b/include/linux/mpi.h @@ -76,6 +76,7 @@ void mpi_swap(MPI a, MPI b); /*-- mpicoder.c --*/ MPI do_encode_md(const void *sha_buffer, unsigned nbits); +MPI mpi_read_raw_data(const void *xbuffer, size_t nbytes); MPI mpi_read_from_buffer(const void *buffer, unsigned *ret_nread); int mpi_fromstr(MPI val, const char *str); u32 mpi_get_keyid(MPI a, u32 *keyid); diff --git a/include/linux/mroute.h b/include/linux/mroute.h index 46caaf44339..ea00d9162ee 100644 --- a/include/linux/mroute.h +++ b/include/linux/mroute.h @@ -1,138 +1,10 @@ #ifndef __LINUX_MROUTE_H #define __LINUX_MROUTE_H -#include <linux/sockios.h> -#include <linux/types.h> -#ifdef __KERNEL__ #include <linux/in.h> -#endif - -/* - * Based on the MROUTING 3.5 defines primarily to keep - * source compatibility with BSD. - * - * See the mrouted code for the original history. - * - * Protocol Independent Multicast (PIM) data structures included - * Carlos Picoto (cap@di.fc.ul.pt) - * - */ - -#define MRT_BASE 200 -#define MRT_INIT (MRT_BASE) /* Activate the kernel mroute code */ -#define MRT_DONE (MRT_BASE+1) /* Shutdown the kernel mroute */ -#define MRT_ADD_VIF (MRT_BASE+2) /* Add a virtual interface */ -#define MRT_DEL_VIF (MRT_BASE+3) /* Delete a virtual interface */ -#define MRT_ADD_MFC (MRT_BASE+4) /* Add a multicast forwarding entry */ -#define MRT_DEL_MFC (MRT_BASE+5) /* Delete a multicast forwarding entry */ -#define MRT_VERSION (MRT_BASE+6) /* Get the kernel multicast version */ -#define MRT_ASSERT (MRT_BASE+7) /* Activate PIM assert mode */ -#define MRT_PIM (MRT_BASE+8) /* enable PIM code */ -#define MRT_TABLE (MRT_BASE+9) /* Specify mroute table ID */ - -#define SIOCGETVIFCNT SIOCPROTOPRIVATE /* IP protocol privates */ -#define SIOCGETSGCNT (SIOCPROTOPRIVATE+1) -#define SIOCGETRPF (SIOCPROTOPRIVATE+2) - -#define MAXVIFS 32 -typedef unsigned long vifbitmap_t; /* User mode code depends on this lot */ -typedef unsigned short vifi_t; -#define ALL_VIFS ((vifi_t)(-1)) - -/* - * Same idea as select - */ - -#define VIFM_SET(n,m) ((m)|=(1<<(n))) -#define VIFM_CLR(n,m) ((m)&=~(1<<(n))) -#define VIFM_ISSET(n,m) ((m)&(1<<(n))) -#define VIFM_CLRALL(m) ((m)=0) -#define VIFM_COPY(mfrom,mto) ((mto)=(mfrom)) -#define VIFM_SAME(m1,m2) ((m1)==(m2)) - -/* - * Passed by mrouted for an MRT_ADD_VIF - again we use the - * mrouted 3.6 structures for compatibility - */ - -struct vifctl { - vifi_t vifc_vifi; /* Index of VIF */ - unsigned char vifc_flags; /* VIFF_ flags */ - unsigned char vifc_threshold; /* ttl limit */ - unsigned int vifc_rate_limit; /* Rate limiter values (NI) */ - union { - struct in_addr vifc_lcl_addr; /* Local interface address */ - int vifc_lcl_ifindex; /* Local interface index */ - }; - struct in_addr vifc_rmt_addr; /* IPIP tunnel addr */ -}; - -#define VIFF_TUNNEL 0x1 /* IPIP tunnel */ -#define VIFF_SRCRT 0x2 /* NI */ -#define VIFF_REGISTER 0x4 /* register vif */ -#define VIFF_USE_IFINDEX 0x8 /* use vifc_lcl_ifindex instead of - vifc_lcl_addr to find an interface */ - -/* - * Cache manipulation structures for mrouted and PIMd - */ - -struct mfcctl { - struct in_addr mfcc_origin; /* Origin of mcast */ - struct in_addr mfcc_mcastgrp; /* Group in question */ - vifi_t mfcc_parent; /* Where it arrived */ - unsigned char mfcc_ttls[MAXVIFS]; /* Where it is going */ - unsigned int mfcc_pkt_cnt; /* pkt count for src-grp */ - unsigned int mfcc_byte_cnt; - unsigned int mfcc_wrong_if; - int mfcc_expire; -}; - -/* - * Group count retrieval for mrouted - */ - -struct sioc_sg_req { - struct in_addr src; - struct in_addr grp; - unsigned long pktcnt; - unsigned long bytecnt; - unsigned long wrong_if; -}; - -/* - * To get vif packet counts - */ - -struct sioc_vif_req { - vifi_t vifi; /* Which iface */ - unsigned long icount; /* In packets */ - unsigned long ocount; /* Out packets */ - unsigned long ibytes; /* In bytes */ - unsigned long obytes; /* Out bytes */ -}; - -/* - * This is the format the mroute daemon expects to see IGMP control - * data. Magically happens to be like an IP packet as per the original - */ - -struct igmpmsg { - __u32 unused1,unused2; - unsigned char im_msgtype; /* What is this */ - unsigned char im_mbz; /* Must be zero */ - unsigned char im_vif; /* Interface (this ought to be a vifi_t!) */ - unsigned char unused3; - struct in_addr im_src,im_dst; -}; - -/* - * That's all usermode folks - */ - -#ifdef __KERNEL__ #include <linux/pim.h> #include <net/sock.h> +#include <uapi/linux/mroute.h> #ifdef CONFIG_IP_MROUTE static inline int ip_mroute_opt(int opt) @@ -228,24 +100,8 @@ struct mfc_cache { #define MFC_HASH(a,b) ((((__force u32)(__be32)a)^(((__force u32)(__be32)b)>>2))&(MFC_LINES-1)) #endif -#endif - - -#define MFC_ASSERT_THRESH (3*HZ) /* Maximal freq. of asserts */ - -/* - * Pseudo messages used by mrouted - */ - -#define IGMPMSG_NOCACHE 1 /* Kern cache fill request to mrouted */ -#define IGMPMSG_WRONGVIF 2 /* For PIM assert processing (unused) */ -#define IGMPMSG_WHOLEPKT 3 /* For PIM Register processing */ - -#ifdef __KERNEL__ struct rtmsg; extern int ipmr_get_route(struct net *net, struct sk_buff *skb, __be32 saddr, __be32 daddr, struct rtmsg *rtm, int nowait); #endif - -#endif diff --git a/include/linux/mroute6.h b/include/linux/mroute6.h index 6d8c7251eb8..a223561ba12 100644 --- a/include/linux/mroute6.h +++ b/include/linux/mroute6.h @@ -1,123 +1,11 @@ #ifndef __LINUX_MROUTE6_H #define __LINUX_MROUTE6_H -#include <linux/types.h> -#include <linux/sockios.h> - -/* - * Based on the MROUTING 3.5 defines primarily to keep - * source compatibility with BSD. - * - * See the pim6sd code for the original history. - * - * Protocol Independent Multicast (PIM) data structures included - * Carlos Picoto (cap@di.fc.ul.pt) - * - */ - -#define MRT6_BASE 200 -#define MRT6_INIT (MRT6_BASE) /* Activate the kernel mroute code */ -#define MRT6_DONE (MRT6_BASE+1) /* Shutdown the kernel mroute */ -#define MRT6_ADD_MIF (MRT6_BASE+2) /* Add a virtual interface */ -#define MRT6_DEL_MIF (MRT6_BASE+3) /* Delete a virtual interface */ -#define MRT6_ADD_MFC (MRT6_BASE+4) /* Add a multicast forwarding entry */ -#define MRT6_DEL_MFC (MRT6_BASE+5) /* Delete a multicast forwarding entry */ -#define MRT6_VERSION (MRT6_BASE+6) /* Get the kernel multicast version */ -#define MRT6_ASSERT (MRT6_BASE+7) /* Activate PIM assert mode */ -#define MRT6_PIM (MRT6_BASE+8) /* enable PIM code */ -#define MRT6_TABLE (MRT6_BASE+9) /* Specify mroute table ID */ - -#define SIOCGETMIFCNT_IN6 SIOCPROTOPRIVATE /* IP protocol privates */ -#define SIOCGETSGCNT_IN6 (SIOCPROTOPRIVATE+1) -#define SIOCGETRPF (SIOCPROTOPRIVATE+2) - -#define MAXMIFS 32 -typedef unsigned long mifbitmap_t; /* User mode code depends on this lot */ -typedef unsigned short mifi_t; -#define ALL_MIFS ((mifi_t)(-1)) - -#ifndef IF_SETSIZE -#define IF_SETSIZE 256 -#endif - -typedef __u32 if_mask; -#define NIFBITS (sizeof(if_mask) * 8) /* bits per mask */ - -#if !defined(__KERNEL__) -#if !defined(DIV_ROUND_UP) -#define DIV_ROUND_UP(x,y) (((x) + ((y) - 1)) / (y)) -#endif -#endif - -typedef struct if_set { - if_mask ifs_bits[DIV_ROUND_UP(IF_SETSIZE, NIFBITS)]; -} if_set; - -#define IF_SET(n, p) ((p)->ifs_bits[(n)/NIFBITS] |= (1 << ((n) % NIFBITS))) -#define IF_CLR(n, p) ((p)->ifs_bits[(n)/NIFBITS] &= ~(1 << ((n) % NIFBITS))) -#define IF_ISSET(n, p) ((p)->ifs_bits[(n)/NIFBITS] & (1 << ((n) % NIFBITS))) -#define IF_COPY(f, t) bcopy(f, t, sizeof(*(f))) -#define IF_ZERO(p) bzero(p, sizeof(*(p))) - -/* - * Passed by mrouted for an MRT_ADD_MIF - again we use the - * mrouted 3.6 structures for compatibility - */ - -struct mif6ctl { - mifi_t mif6c_mifi; /* Index of MIF */ - unsigned char mif6c_flags; /* MIFF_ flags */ - unsigned char vifc_threshold; /* ttl limit */ - __u16 mif6c_pifi; /* the index of the physical IF */ - unsigned int vifc_rate_limit; /* Rate limiter values (NI) */ -}; - -#define MIFF_REGISTER 0x1 /* register vif */ - -/* - * Cache manipulation structures for mrouted and PIMd - */ - -struct mf6cctl { - struct sockaddr_in6 mf6cc_origin; /* Origin of mcast */ - struct sockaddr_in6 mf6cc_mcastgrp; /* Group in question */ - mifi_t mf6cc_parent; /* Where it arrived */ - struct if_set mf6cc_ifset; /* Where it is going */ -}; - -/* - * Group count retrieval for pim6sd - */ - -struct sioc_sg_req6 { - struct sockaddr_in6 src; - struct sockaddr_in6 grp; - unsigned long pktcnt; - unsigned long bytecnt; - unsigned long wrong_if; -}; - -/* - * To get vif packet counts - */ - -struct sioc_mif_req6 { - mifi_t mifi; /* Which iface */ - unsigned long icount; /* In packets */ - unsigned long ocount; /* Out packets */ - unsigned long ibytes; /* In bytes */ - unsigned long obytes; /* Out bytes */ -}; - -/* - * That's all usermode folks - */ - -#ifdef __KERNEL__ #include <linux/pim.h> #include <linux/skbuff.h> /* for struct sk_buff_head */ #include <net/net_namespace.h> +#include <uapi/linux/mroute6.h> #ifdef CONFIG_IPV6_MROUTE static inline int ip6_mroute_opt(int opt) @@ -225,9 +113,6 @@ struct mfc6_cache { #define MFC_ASSERT_THRESH (3*HZ) /* Maximal freq. of asserts */ -#endif - -#ifdef __KERNEL__ struct rtmsg; extern int ip6mr_get_route(struct net *net, struct sk_buff *skb, struct rtmsg *rtm, int nowait); @@ -246,24 +131,3 @@ static inline int ip6mr_sk_done(struct sock *sk) } #endif #endif - -/* - * Structure used to communicate from kernel to multicast router. - * We'll overlay the structure onto an MLD header (not an IPv6 heder like igmpmsg{} - * used for IPv4 implementation). This is because this structure will be passed via an - * IPv6 raw socket, on which an application will only receiver the payload i.e the data after - * the IPv6 header and all the extension headers. (See section 3 of RFC 3542) - */ - -struct mrt6msg { -#define MRT6MSG_NOCACHE 1 -#define MRT6MSG_WRONGMIF 2 -#define MRT6MSG_WHOLEPKT 3 /* used for use level encap */ - __u8 im6_mbz; /* must be zero */ - __u8 im6_msgtype; /* what type of message */ - __u16 im6_mif; /* mif rec'd on */ - __u32 im6_pad; /* padding for 64 bit arch */ - struct in6_addr im6_src, im6_dst; -}; - -#endif diff --git a/include/linux/msdos_fs.h b/include/linux/msdos_fs.h index 11cc2ac67e7..e1b163f912f 100644 --- a/include/linux/msdos_fs.h +++ b/include/linux/msdos_fs.h @@ -1,174 +1,11 @@ #ifndef _LINUX_MSDOS_FS_H #define _LINUX_MSDOS_FS_H -#include <linux/types.h> -#include <linux/magic.h> -#include <asm/byteorder.h> +#include <uapi/linux/msdos_fs.h> -/* - * The MS-DOS filesystem constants/structures - */ - -#define SECTOR_SIZE 512 /* sector size (bytes) */ -#define SECTOR_BITS 9 /* log2(SECTOR_SIZE) */ -#define MSDOS_DPB (MSDOS_DPS) /* dir entries per block */ -#define MSDOS_DPB_BITS 4 /* log2(MSDOS_DPB) */ -#define MSDOS_DPS (SECTOR_SIZE / sizeof(struct msdos_dir_entry)) -#define MSDOS_DPS_BITS 4 /* log2(MSDOS_DPS) */ -#define MSDOS_LONGNAME 256 /* maximum name length */ -#define CF_LE_W(v) le16_to_cpu(v) -#define CF_LE_L(v) le32_to_cpu(v) -#define CT_LE_W(v) cpu_to_le16(v) -#define CT_LE_L(v) cpu_to_le32(v) - -#define MSDOS_ROOT_INO 1 /* The root inode number */ -#define MSDOS_FSINFO_INO 2 /* Used for managing the FSINFO block */ - -#define MSDOS_DIR_BITS 5 /* log2(sizeof(struct msdos_dir_entry)) */ - -/* directory limit */ -#define FAT_MAX_DIR_ENTRIES (65536) -#define FAT_MAX_DIR_SIZE (FAT_MAX_DIR_ENTRIES << MSDOS_DIR_BITS) - -#define ATTR_NONE 0 /* no attribute bits */ -#define ATTR_RO 1 /* read-only */ -#define ATTR_HIDDEN 2 /* hidden */ -#define ATTR_SYS 4 /* system */ -#define ATTR_VOLUME 8 /* volume label */ -#define ATTR_DIR 16 /* directory */ -#define ATTR_ARCH 32 /* archived */ - -/* attribute bits that are copied "as is" */ -#define ATTR_UNUSED (ATTR_VOLUME | ATTR_ARCH | ATTR_SYS | ATTR_HIDDEN) -/* bits that are used by the Windows 95/Windows NT extended FAT */ -#define ATTR_EXT (ATTR_RO | ATTR_HIDDEN | ATTR_SYS | ATTR_VOLUME) - -#define CASE_LOWER_BASE 8 /* base is lower case */ -#define CASE_LOWER_EXT 16 /* extension is lower case */ - -#define DELETED_FLAG 0xe5 /* marks file as deleted when in name[0] */ -#define IS_FREE(n) (!*(n) || *(n) == DELETED_FLAG) - -#define FAT_LFN_LEN 255 /* maximum long name length */ -#define MSDOS_NAME 11 /* maximum name length */ -#define MSDOS_SLOTS 21 /* max # of slots for short and long names */ -#define MSDOS_DOT ". " /* ".", padded to MSDOS_NAME chars */ -#define MSDOS_DOTDOT ".. " /* "..", padded to MSDOS_NAME chars */ - -#define FAT_FIRST_ENT(s, x) ((MSDOS_SB(s)->fat_bits == 32 ? 0x0FFFFF00 : \ - MSDOS_SB(s)->fat_bits == 16 ? 0xFF00 : 0xF00) | (x)) - -/* start of data cluster's entry (number of reserved clusters) */ -#define FAT_START_ENT 2 - -/* maximum number of clusters */ -#define MAX_FAT12 0xFF4 -#define MAX_FAT16 0xFFF4 -#define MAX_FAT32 0x0FFFFFF6 -#define MAX_FAT(s) (MSDOS_SB(s)->fat_bits == 32 ? MAX_FAT32 : \ - MSDOS_SB(s)->fat_bits == 16 ? MAX_FAT16 : MAX_FAT12) - -/* bad cluster mark */ -#define BAD_FAT12 0xFF7 -#define BAD_FAT16 0xFFF7 -#define BAD_FAT32 0x0FFFFFF7 - -/* standard EOF */ -#define EOF_FAT12 0xFFF -#define EOF_FAT16 0xFFFF -#define EOF_FAT32 0x0FFFFFFF - -#define FAT_ENT_FREE (0) -#define FAT_ENT_BAD (BAD_FAT32) -#define FAT_ENT_EOF (EOF_FAT32) - -#define FAT_FSINFO_SIG1 0x41615252 -#define FAT_FSINFO_SIG2 0x61417272 -#define IS_FSINFO(x) (le32_to_cpu((x)->signature1) == FAT_FSINFO_SIG1 \ - && le32_to_cpu((x)->signature2) == FAT_FSINFO_SIG2) - -struct __fat_dirent { - long d_ino; - __kernel_off_t d_off; - unsigned short d_reclen; - char d_name[256]; /* We must not include limits.h! */ -}; - -/* - * ioctl commands - */ -#define VFAT_IOCTL_READDIR_BOTH _IOR('r', 1, struct __fat_dirent[2]) -#define VFAT_IOCTL_READDIR_SHORT _IOR('r', 2, struct __fat_dirent[2]) -/* <linux/videotext.h> has used 0x72 ('r') in collision, so skip a few */ -#define FAT_IOCTL_GET_ATTRIBUTES _IOR('r', 0x10, __u32) -#define FAT_IOCTL_SET_ATTRIBUTES _IOW('r', 0x11, __u32) - -struct fat_boot_sector { - __u8 ignored[3]; /* Boot strap short or near jump */ - __u8 system_id[8]; /* Name - can be used to special case - partition manager volumes */ - __u8 sector_size[2]; /* bytes per logical sector */ - __u8 sec_per_clus; /* sectors/cluster */ - __le16 reserved; /* reserved sectors */ - __u8 fats; /* number of FATs */ - __u8 dir_entries[2]; /* root directory entries */ - __u8 sectors[2]; /* number of sectors */ - __u8 media; /* media code */ - __le16 fat_length; /* sectors/FAT */ - __le16 secs_track; /* sectors per track */ - __le16 heads; /* number of heads */ - __le32 hidden; /* hidden sectors (unused) */ - __le32 total_sect; /* number of sectors (if sectors == 0) */ - - /* The following fields are only used by FAT32 */ - __le32 fat32_length; /* sectors/FAT */ - __le16 flags; /* bit 8: fat mirroring, low 4: active fat */ - __u8 version[2]; /* major, minor filesystem version */ - __le32 root_cluster; /* first cluster in root directory */ - __le16 info_sector; /* filesystem info sector */ - __le16 backup_boot; /* backup boot sector */ - __le16 reserved2[6]; /* Unused */ -}; - -struct fat_boot_fsinfo { - __le32 signature1; /* 0x41615252L */ - __le32 reserved1[120]; /* Nothing as far as I can tell */ - __le32 signature2; /* 0x61417272L */ - __le32 free_clusters; /* Free cluster count. -1 if unknown */ - __le32 next_cluster; /* Most recently allocated cluster */ - __le32 reserved2[4]; -}; - -struct msdos_dir_entry { - __u8 name[MSDOS_NAME];/* name and extension */ - __u8 attr; /* attribute bits */ - __u8 lcase; /* Case for base and extension */ - __u8 ctime_cs; /* Creation time, centiseconds (0-199) */ - __le16 ctime; /* Creation time */ - __le16 cdate; /* Creation date */ - __le16 adate; /* Last access date */ - __le16 starthi; /* High 16 bits of cluster in FAT32 */ - __le16 time,date,start;/* time, date and first cluster */ - __le32 size; /* file size (in bytes) */ -}; - -/* Up to 13 characters of the name */ -struct msdos_dir_slot { - __u8 id; /* sequence number for slot */ - __u8 name0_4[10]; /* first 5 characters in name */ - __u8 attr; /* attribute byte */ - __u8 reserved; /* always 0 */ - __u8 alias_checksum; /* checksum for 8.3 alias */ - __u8 name5_10[12]; /* 6 more characters in name */ - __le16 start; /* starting cluster number, 0 in long slots */ - __u8 name11_12[4]; /* last 2 characters in name */ -}; - -#ifdef __KERNEL__ /* media of boot sector */ static inline int fat_valid_media(u8 media) { return 0xf8 <= media || media == 0xf0; } -#endif /* !__KERNEL__ */ #endif /* !_LINUX_MSDOS_FS_H */ diff --git a/include/linux/msg.h b/include/linux/msg.h index 56abf1558fd..7a4b9e97d29 100644 --- a/include/linux/msg.h +++ b/include/linux/msg.h @@ -1,78 +1,8 @@ #ifndef _LINUX_MSG_H #define _LINUX_MSG_H -#include <linux/ipc.h> - -/* ipcs ctl commands */ -#define MSG_STAT 11 -#define MSG_INFO 12 - -/* msgrcv options */ -#define MSG_NOERROR 010000 /* no error if message is too big */ -#define MSG_EXCEPT 020000 /* recv any msg except of specified type.*/ - -/* Obsolete, used only for backwards compatibility and libc5 compiles */ -struct msqid_ds { - struct ipc_perm msg_perm; - struct msg *msg_first; /* first message on queue,unused */ - struct msg *msg_last; /* last message in queue,unused */ - __kernel_time_t msg_stime; /* last msgsnd time */ - __kernel_time_t msg_rtime; /* last msgrcv time */ - __kernel_time_t msg_ctime; /* last change time */ - unsigned long msg_lcbytes; /* Reuse junk fields for 32 bit */ - unsigned long msg_lqbytes; /* ditto */ - unsigned short msg_cbytes; /* current number of bytes on queue */ - unsigned short msg_qnum; /* number of messages in queue */ - unsigned short msg_qbytes; /* max number of bytes on queue */ - __kernel_ipc_pid_t msg_lspid; /* pid of last msgsnd */ - __kernel_ipc_pid_t msg_lrpid; /* last receive pid */ -}; - -/* Include the definition of msqid64_ds */ -#include <asm/msgbuf.h> - -/* message buffer for msgsnd and msgrcv calls */ -struct msgbuf { - long mtype; /* type of message */ - char mtext[1]; /* message text */ -}; - -/* buffer for msgctl calls IPC_INFO, MSG_INFO */ -struct msginfo { - int msgpool; - int msgmap; - int msgmax; - int msgmnb; - int msgmni; - int msgssz; - int msgtql; - unsigned short msgseg; -}; - -/* - * Scaling factor to compute msgmni: - * the memory dedicated to msg queues (msgmni * msgmnb) should occupy - * at most 1/MSG_MEM_SCALE of the lowmem (see the formula in ipc/msg.c): - * up to 8MB : msgmni = 16 (MSGMNI) - * 4 GB : msgmni = 8K - * more than 16 GB : msgmni = 32K (IPCMNI) - */ -#define MSG_MEM_SCALE 32 - -#define MSGMNI 16 /* <= IPCMNI */ /* max # of msg queue identifiers */ -#define MSGMAX 8192 /* <= INT_MAX */ /* max size of message (bytes) */ -#define MSGMNB 16384 /* <= INT_MAX */ /* default max size of a message queue */ - -/* unused */ -#define MSGPOOL (MSGMNI * MSGMNB / 1024) /* size in kbytes of message pool */ -#define MSGTQL MSGMNB /* number of system message headers */ -#define MSGMAP MSGMNB /* number of entries in message map */ -#define MSGSSZ 16 /* message segment size */ -#define __MSGSEG ((MSGPOOL * 1024) / MSGSSZ) /* max no. of segments */ -#define MSGSEG (__MSGSEG <= 0xffff ? __MSGSEG : 0xffff) - -#ifdef __KERNEL__ #include <linux/list.h> +#include <uapi/linux/msg.h> /* one msg_msg structure for each message */ struct msg_msg { @@ -107,6 +37,4 @@ extern long do_msgsnd(int msqid, long mtype, void __user *mtext, extern long do_msgrcv(int msqid, long *pmtype, void __user *mtext, size_t msgsz, long msgtyp, int msgflg); -#endif /* __KERNEL__ */ - #endif /* _LINUX_MSG_H */ diff --git a/include/linux/n_r3964.h b/include/linux/n_r3964.h index 54b8e0d8d91..5d0b2a1dee6 100644 --- a/include/linux/n_r3964.h +++ b/include/linux/n_r3964.h @@ -43,15 +43,12 @@ * * */ - #ifndef __LINUX_N_R3964_H__ #define __LINUX_N_R3964_H__ -/* line disciplines for r3964 protocol */ - -#ifdef __KERNEL__ #include <linux/param.h> +#include <uapi/linux/n_r3964.h> /* * Common ascii handshake characters: @@ -73,32 +70,6 @@ #define R3964_TO_RX_PANIC ((4000)*HZ/1000) #define R3964_MAX_RETRIES 5 -#endif - -/* - * Ioctl-commands - */ - -#define R3964_ENABLE_SIGNALS 0x5301 -#define R3964_SETPRIORITY 0x5302 -#define R3964_USE_BCC 0x5303 -#define R3964_READ_TELEGRAM 0x5304 - -/* Options for R3964_SETPRIORITY */ -#define R3964_MASTER 0 -#define R3964_SLAVE 1 - -/* Options for R3964_ENABLE_SIGNALS */ -#define R3964_SIG_ACK 0x0001 -#define R3964_SIG_DATA 0x0002 -#define R3964_SIG_ALL 0x000f -#define R3964_SIG_NONE 0x0000 -#define R3964_USE_SIGIO 0x1000 - -/* - * r3964 operation states: - */ -#ifdef __KERNEL__ enum { R3964_IDLE, R3964_TX_REQUEST, R3964_TRANSMITTING, @@ -127,29 +98,6 @@ struct r3964_client_info { }; -#endif - -/* types for msg_id: */ -enum {R3964_MSG_ACK=1, R3964_MSG_DATA }; - -#define R3964_MAX_MSG_COUNT 32 - -/* error codes for client messages */ -#define R3964_OK 0 /* no error. */ -#define R3964_TX_FAIL -1 /* transmission error, block NOT sent */ -#define R3964_OVERFLOW -2 /* msg queue overflow */ - -/* the client gets this struct when calling read(fd,...): */ -struct r3964_client_message { - int msg_id; - int arg; - int error_code; -}; - -#define R3964_MTU 256 - - -#ifdef __KERNEL__ struct r3964_block_header; @@ -226,6 +174,4 @@ struct r3964_info { int nRetry; }; -#endif - #endif diff --git a/include/linux/nbd.h b/include/linux/nbd.h index 5c86e2b33e2..4871170a04a 100644 --- a/include/linux/nbd.h +++ b/include/linux/nbd.h @@ -11,45 +11,13 @@ * 2004/02/19 Paul Clements * Removed PARANOIA, plus various cleanup and comments */ - #ifndef LINUX_NBD_H #define LINUX_NBD_H -#include <linux/types.h> - -#define NBD_SET_SOCK _IO( 0xab, 0 ) -#define NBD_SET_BLKSIZE _IO( 0xab, 1 ) -#define NBD_SET_SIZE _IO( 0xab, 2 ) -#define NBD_DO_IT _IO( 0xab, 3 ) -#define NBD_CLEAR_SOCK _IO( 0xab, 4 ) -#define NBD_CLEAR_QUE _IO( 0xab, 5 ) -#define NBD_PRINT_DEBUG _IO( 0xab, 6 ) -#define NBD_SET_SIZE_BLOCKS _IO( 0xab, 7 ) -#define NBD_DISCONNECT _IO( 0xab, 8 ) -#define NBD_SET_TIMEOUT _IO( 0xab, 9 ) -#define NBD_SET_FLAGS _IO( 0xab, 10) - -enum { - NBD_CMD_READ = 0, - NBD_CMD_WRITE = 1, - NBD_CMD_DISC = 2, - /* there is a gap here to match userspace */ - NBD_CMD_TRIM = 4 -}; - -/* values for flags field */ -#define NBD_FLAG_HAS_FLAGS (1 << 0) /* nbd-server supports flags */ -#define NBD_FLAG_READ_ONLY (1 << 1) /* device is read-only */ -/* there is a gap here to match userspace */ -#define NBD_FLAG_SEND_TRIM (1 << 5) /* send trim/discard */ - -#define nbd_cmd(req) ((req)->cmd[0]) - -/* userspace doesn't need the nbd_device structure */ -#ifdef __KERNEL__ #include <linux/wait.h> #include <linux/mutex.h> +#include <uapi/linux/nbd.h> struct request; @@ -76,32 +44,3 @@ struct nbd_device { }; #endif - -/* These are sent over the network in the request/reply magic fields */ - -#define NBD_REQUEST_MAGIC 0x25609513 -#define NBD_REPLY_MAGIC 0x67446698 -/* Do *not* use magics: 0x12560953 0x96744668. */ - -/* - * This is the packet used for communication between client and - * server. All data are in network byte order. - */ -struct nbd_request { - __be32 magic; - __be32 type; /* == READ || == WRITE */ - char handle[8]; - __be64 from; - __be32 len; -} __attribute__((packed)); - -/* - * This is the reply packet that nbd-server sends back to the client after - * it has completed an I/O request (or an error occurs). - */ -struct nbd_reply { - __be32 magic; - __be32 error; /* 0 = ok, else error */ - char handle[8]; /* handle you got from request */ -}; -#endif diff --git a/include/linux/net.h b/include/linux/net.h index 6ab31cabef7..aa1673160a4 100644 --- a/include/linux/net.h +++ b/include/linux/net.h @@ -18,49 +18,13 @@ #ifndef _LINUX_NET_H #define _LINUX_NET_H -#include <linux/socket.h> -#include <asm/socket.h> - -#define NPROTO AF_MAX - -#define SYS_SOCKET 1 /* sys_socket(2) */ -#define SYS_BIND 2 /* sys_bind(2) */ -#define SYS_CONNECT 3 /* sys_connect(2) */ -#define SYS_LISTEN 4 /* sys_listen(2) */ -#define SYS_ACCEPT 5 /* sys_accept(2) */ -#define SYS_GETSOCKNAME 6 /* sys_getsockname(2) */ -#define SYS_GETPEERNAME 7 /* sys_getpeername(2) */ -#define SYS_SOCKETPAIR 8 /* sys_socketpair(2) */ -#define SYS_SEND 9 /* sys_send(2) */ -#define SYS_RECV 10 /* sys_recv(2) */ -#define SYS_SENDTO 11 /* sys_sendto(2) */ -#define SYS_RECVFROM 12 /* sys_recvfrom(2) */ -#define SYS_SHUTDOWN 13 /* sys_shutdown(2) */ -#define SYS_SETSOCKOPT 14 /* sys_setsockopt(2) */ -#define SYS_GETSOCKOPT 15 /* sys_getsockopt(2) */ -#define SYS_SENDMSG 16 /* sys_sendmsg(2) */ -#define SYS_RECVMSG 17 /* sys_recvmsg(2) */ -#define SYS_ACCEPT4 18 /* sys_accept4(2) */ -#define SYS_RECVMMSG 19 /* sys_recvmmsg(2) */ -#define SYS_SENDMMSG 20 /* sys_sendmmsg(2) */ - -typedef enum { - SS_FREE = 0, /* not allocated */ - SS_UNCONNECTED, /* unconnected to any socket */ - SS_CONNECTING, /* in process of connecting */ - SS_CONNECTED, /* connected to socket */ - SS_DISCONNECTING /* in process of disconnecting */ -} socket_state; - -#define __SO_ACCEPTCON (1 << 16) /* performed a listen */ - -#ifdef __KERNEL__ #include <linux/stringify.h> #include <linux/random.h> #include <linux/wait.h> #include <linux/fcntl.h> /* For O_CLOEXEC and O_NONBLOCK */ #include <linux/kmemcheck.h> #include <linux/rcupdate.h> +#include <uapi/linux/net.h> struct poll_table_struct; struct pipe_inode_info; @@ -319,5 +283,4 @@ extern int kernel_sock_shutdown(struct socket *sock, #define MODULE_ALIAS_NET_PF_PROTO_NAME(pf, proto, name) \ MODULE_ALIAS("net-pf-" __stringify(pf) "-proto-" __stringify(proto) \ name) -#endif /* __KERNEL__ */ #endif /* _LINUX_NET_H */ diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 561c8bc8976..f8eda0276f0 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -25,12 +25,6 @@ #ifndef _LINUX_NETDEVICE_H #define _LINUX_NETDEVICE_H -#include <linux/if.h> -#include <linux/if_ether.h> -#include <linux/if_packet.h> -#include <linux/if_link.h> - -#ifdef __KERNEL__ #include <linux/pm_qos.h> #include <linux/timer.h> #include <linux/bug.h> @@ -55,6 +49,7 @@ #include <linux/netdev_features.h> #include <linux/neighbour.h> +#include <uapi/linux/netdevice.h> struct netpoll_info; struct device; @@ -133,14 +128,6 @@ static inline bool dev_xmit_complete(int rc) return false; } -#endif - -#define MAX_ADDR_LEN 32 /* Largest hardware address length */ - -/* Initial net device group. All devices belong to group 0 by default. */ -#define INIT_NETDEV_GROUP 0 - -#ifdef __KERNEL__ /* * Compute the worst case header length according to the protocols * used. @@ -196,21 +183,6 @@ struct net_device_stats { unsigned long tx_compressed; }; -#endif /* __KERNEL__ */ - - -/* Media selection options. */ -enum { - IF_PORT_UNKNOWN = 0, - IF_PORT_10BASE2, - IF_PORT_10BASET, - IF_PORT_AUI, - IF_PORT_100BASET, - IF_PORT_100BASETX, - IF_PORT_100BASEFX -}; - -#ifdef __KERNEL__ #include <linux/cache.h> #include <linux/skbuff.h> @@ -2844,6 +2816,4 @@ do { \ }) #endif -#endif /* __KERNEL__ */ - #endif /* _LINUX_NETDEVICE_H */ diff --git a/include/linux/netfilter.h b/include/linux/netfilter.h index 1dcf2a38e51..ee142846f56 100644 --- a/include/linux/netfilter.h +++ b/include/linux/netfilter.h @@ -1,7 +1,6 @@ #ifndef __LINUX_NETFILTER_H #define __LINUX_NETFILTER_H -#ifdef __KERNEL__ #include <linux/init.h> #include <linux/skbuff.h> #include <linux/net.h> @@ -10,75 +9,7 @@ #include <linux/in6.h> #include <linux/wait.h> #include <linux/list.h> -#endif -#include <linux/types.h> -#include <linux/compiler.h> -#include <linux/sysctl.h> - -/* Responses from hook functions. */ -#define NF_DROP 0 -#define NF_ACCEPT 1 -#define NF_STOLEN 2 -#define NF_QUEUE 3 -#define NF_REPEAT 4 -#define NF_STOP 5 -#define NF_MAX_VERDICT NF_STOP - -/* we overload the higher bits for encoding auxiliary data such as the queue - * number or errno values. Not nice, but better than additional function - * arguments. */ -#define NF_VERDICT_MASK 0x000000ff - -/* extra verdict flags have mask 0x0000ff00 */ -#define NF_VERDICT_FLAG_QUEUE_BYPASS 0x00008000 - -/* queue number (NF_QUEUE) or errno (NF_DROP) */ -#define NF_VERDICT_QMASK 0xffff0000 -#define NF_VERDICT_QBITS 16 - -#define NF_QUEUE_NR(x) ((((x) << 16) & NF_VERDICT_QMASK) | NF_QUEUE) - -#define NF_DROP_ERR(x) (((-x) << 16) | NF_DROP) - -/* only for userspace compatibility */ -#ifndef __KERNEL__ -/* Generic cache responses from hook functions. - <= 0x2000 is used for protocol-flags. */ -#define NFC_UNKNOWN 0x4000 -#define NFC_ALTERED 0x8000 - -/* NF_VERDICT_BITS should be 8 now, but userspace might break if this changes */ -#define NF_VERDICT_BITS 16 -#endif - -enum nf_inet_hooks { - NF_INET_PRE_ROUTING, - NF_INET_LOCAL_IN, - NF_INET_FORWARD, - NF_INET_LOCAL_OUT, - NF_INET_POST_ROUTING, - NF_INET_NUMHOOKS -}; - -enum { - NFPROTO_UNSPEC = 0, - NFPROTO_IPV4 = 2, - NFPROTO_ARP = 3, - NFPROTO_BRIDGE = 7, - NFPROTO_IPV6 = 10, - NFPROTO_DECNET = 12, - NFPROTO_NUMPROTO, -}; - -union nf_inet_addr { - __u32 all[4]; - __be32 ip; - __be32 ip6[4]; - struct in_addr in; - struct in6_addr in6; -}; - -#ifdef __KERNEL__ +#include <uapi/linux/netfilter.h> #ifdef CONFIG_NETFILTER static inline int NF_DROP_GETERR(int verdict) { @@ -411,5 +342,4 @@ extern struct nfq_ct_nat_hook __rcu *nfq_ct_nat_hook; static inline void nf_ct_attach(struct sk_buff *new, struct sk_buff *skb) {} #endif -#endif /*__KERNEL__*/ #endif /*__LINUX_NETFILTER_H*/ diff --git a/include/linux/netfilter_bridge.h b/include/linux/netfilter_bridge.h index 31d2844e657..dfb4d9e52bc 100644 --- a/include/linux/netfilter_bridge.h +++ b/include/linux/netfilter_bridge.h @@ -1,30 +1,8 @@ #ifndef __LINUX_BRIDGE_NETFILTER_H #define __LINUX_BRIDGE_NETFILTER_H -/* bridge-specific defines for netfilter. - */ - -#include <linux/netfilter.h> -#include <linux/if_ether.h> -#include <linux/if_vlan.h> -#include <linux/if_pppox.h> - -/* Bridge Hooks */ -/* After promisc drops, checksum checks. */ -#define NF_BR_PRE_ROUTING 0 -/* If the packet is destined for this box. */ -#define NF_BR_LOCAL_IN 1 -/* If the packet is destined for another interface. */ -#define NF_BR_FORWARD 2 -/* Packets coming from a local process. */ -#define NF_BR_LOCAL_OUT 3 -/* Packets about to hit the wire. */ -#define NF_BR_POST_ROUTING 4 -/* Not really a hook, but used for the ebtables broute table */ -#define NF_BR_BROUTING 5 -#define NF_BR_NUMHOOKS 6 - -#ifdef __KERNEL__ +#include <uapi/linux/netfilter_bridge.h> + enum nf_br_hook_priorities { NF_BR_PRI_FIRST = INT_MIN, @@ -118,5 +96,4 @@ static inline void br_drop_fake_rtable(struct sk_buff *skb) #define br_drop_fake_rtable(skb) do { } while (0) #endif /* CONFIG_BRIDGE_NETFILTER */ -#endif /* __KERNEL__ */ #endif diff --git a/include/linux/netfilter_ipv4.h b/include/linux/netfilter_ipv4.h index b962dfc695a..dfaf116b3e8 100644 --- a/include/linux/netfilter_ipv4.h +++ b/include/linux/netfilter_ipv4.h @@ -1,86 +1,12 @@ -#ifndef __LINUX_IP_NETFILTER_H -#define __LINUX_IP_NETFILTER_H - /* IPv4-specific defines for netfilter. * (C)1998 Rusty Russell -- This code is GPL. */ +#ifndef __LINUX_IP_NETFILTER_H +#define __LINUX_IP_NETFILTER_H -#include <linux/netfilter.h> - -/* only for userspace compatibility */ -#ifndef __KERNEL__ - -#include <limits.h> /* for INT_MIN, INT_MAX */ - -/* IP Cache bits. */ -/* Src IP address. */ -#define NFC_IP_SRC 0x0001 -/* Dest IP address. */ -#define NFC_IP_DST 0x0002 -/* Input device. */ -#define NFC_IP_IF_IN 0x0004 -/* Output device. */ -#define NFC_IP_IF_OUT 0x0008 -/* TOS. */ -#define NFC_IP_TOS 0x0010 -/* Protocol. */ -#define NFC_IP_PROTO 0x0020 -/* IP options. */ -#define NFC_IP_OPTIONS 0x0040 -/* Frag & flags. */ -#define NFC_IP_FRAG 0x0080 - -/* Per-protocol information: only matters if proto match. */ -/* TCP flags. */ -#define NFC_IP_TCPFLAGS 0x0100 -/* Source port. */ -#define NFC_IP_SRC_PT 0x0200 -/* Dest port. */ -#define NFC_IP_DST_PT 0x0400 -/* Something else about the proto */ -#define NFC_IP_PROTO_UNKNOWN 0x2000 - -/* IP Hooks */ -/* After promisc drops, checksum checks. */ -#define NF_IP_PRE_ROUTING 0 -/* If the packet is destined for this box. */ -#define NF_IP_LOCAL_IN 1 -/* If the packet is destined for another interface. */ -#define NF_IP_FORWARD 2 -/* Packets coming from a local process. */ -#define NF_IP_LOCAL_OUT 3 -/* Packets about to hit the wire. */ -#define NF_IP_POST_ROUTING 4 -#define NF_IP_NUMHOOKS 5 -#endif /* ! __KERNEL__ */ - -enum nf_ip_hook_priorities { - NF_IP_PRI_FIRST = INT_MIN, - NF_IP_PRI_CONNTRACK_DEFRAG = -400, - NF_IP_PRI_RAW = -300, - NF_IP_PRI_SELINUX_FIRST = -225, - NF_IP_PRI_CONNTRACK = -200, - NF_IP_PRI_MANGLE = -150, - NF_IP_PRI_NAT_DST = -100, - NF_IP_PRI_FILTER = 0, - NF_IP_PRI_SECURITY = 50, - NF_IP_PRI_NAT_SRC = 100, - NF_IP_PRI_SELINUX_LAST = 225, - NF_IP_PRI_CONNTRACK_HELPER = 300, - NF_IP_PRI_CONNTRACK_CONFIRM = INT_MAX, - NF_IP_PRI_LAST = INT_MAX, -}; - -/* Arguments for setsockopt SOL_IP: */ -/* 2.0 firewalling went from 64 through 71 (and +256, +512, etc). */ -/* 2.2 firewalling (+ masq) went from 64 through 76 */ -/* 2.4 firewalling went 64 through 67. */ -#define SO_ORIGINAL_DST 80 +#include <uapi/linux/netfilter_ipv4.h> -#ifdef __KERNEL__ extern int ip_route_me_harder(struct sk_buff *skb, unsigned addr_type); extern __sum16 nf_ip_checksum(struct sk_buff *skb, unsigned int hook, unsigned int dataoff, u_int8_t protocol); -#endif /*__KERNEL__*/ - #endif /*__LINUX_IP_NETFILTER_H*/ diff --git a/include/linux/netfilter_ipv6.h b/include/linux/netfilter_ipv6.h index 7c8a513ce7a..98ffb54988b 100644 --- a/include/linux/netfilter_ipv6.h +++ b/include/linux/netfilter_ipv6.h @@ -1,81 +1,14 @@ -#ifndef __LINUX_IP6_NETFILTER_H -#define __LINUX_IP6_NETFILTER_H - /* IPv6-specific defines for netfilter. * (C)1998 Rusty Russell -- This code is GPL. * (C)1999 David Jeffery * this header was blatantly ripped from netfilter_ipv4.h * it's amazing what adding a bunch of 6s can do =8^) */ +#ifndef __LINUX_IP6_NETFILTER_H +#define __LINUX_IP6_NETFILTER_H -#include <linux/netfilter.h> - -/* only for userspace compatibility */ -#ifndef __KERNEL__ - -#include <limits.h> /* for INT_MIN, INT_MAX */ - -/* IP Cache bits. */ -/* Src IP address. */ -#define NFC_IP6_SRC 0x0001 -/* Dest IP address. */ -#define NFC_IP6_DST 0x0002 -/* Input device. */ -#define NFC_IP6_IF_IN 0x0004 -/* Output device. */ -#define NFC_IP6_IF_OUT 0x0008 -/* TOS. */ -#define NFC_IP6_TOS 0x0010 -/* Protocol. */ -#define NFC_IP6_PROTO 0x0020 -/* IP options. */ -#define NFC_IP6_OPTIONS 0x0040 -/* Frag & flags. */ -#define NFC_IP6_FRAG 0x0080 - - -/* Per-protocol information: only matters if proto match. */ -/* TCP flags. */ -#define NFC_IP6_TCPFLAGS 0x0100 -/* Source port. */ -#define NFC_IP6_SRC_PT 0x0200 -/* Dest port. */ -#define NFC_IP6_DST_PT 0x0400 -/* Something else about the proto */ -#define NFC_IP6_PROTO_UNKNOWN 0x2000 - -/* IP6 Hooks */ -/* After promisc drops, checksum checks. */ -#define NF_IP6_PRE_ROUTING 0 -/* If the packet is destined for this box. */ -#define NF_IP6_LOCAL_IN 1 -/* If the packet is destined for another interface. */ -#define NF_IP6_FORWARD 2 -/* Packets coming from a local process. */ -#define NF_IP6_LOCAL_OUT 3 -/* Packets about to hit the wire. */ -#define NF_IP6_POST_ROUTING 4 -#define NF_IP6_NUMHOOKS 5 -#endif /* ! __KERNEL__ */ - - -enum nf_ip6_hook_priorities { - NF_IP6_PRI_FIRST = INT_MIN, - NF_IP6_PRI_CONNTRACK_DEFRAG = -400, - NF_IP6_PRI_RAW = -300, - NF_IP6_PRI_SELINUX_FIRST = -225, - NF_IP6_PRI_CONNTRACK = -200, - NF_IP6_PRI_MANGLE = -150, - NF_IP6_PRI_NAT_DST = -100, - NF_IP6_PRI_FILTER = 0, - NF_IP6_PRI_SECURITY = 50, - NF_IP6_PRI_NAT_SRC = 100, - NF_IP6_PRI_SELINUX_LAST = 225, - NF_IP6_PRI_CONNTRACK_HELPER = 300, - NF_IP6_PRI_LAST = INT_MAX, -}; +#include <uapi/linux/netfilter_ipv6.h> -#ifdef __KERNEL__ #ifdef CONFIG_NETFILTER extern int ip6_route_me_harder(struct sk_buff *skb); @@ -89,6 +22,4 @@ static inline int ipv6_netfilter_init(void) { return 0; } static inline void ipv6_netfilter_fini(void) { return; } #endif /* CONFIG_NETFILTER */ -#endif /* __KERNEL__ */ - #endif /*__LINUX_IP6_NETFILTER_H*/ diff --git a/include/linux/netlink.h b/include/linux/netlink.h index 6d3af05c107..e0f746b7b95 100644 --- a/include/linux/netlink.h +++ b/include/linux/netlink.h @@ -1,160 +1,12 @@ #ifndef __LINUX_NETLINK_H #define __LINUX_NETLINK_H -#include <linux/socket.h> /* for __kernel_sa_family_t */ -#include <linux/types.h> - -#define NETLINK_ROUTE 0 /* Routing/device hook */ -#define NETLINK_UNUSED 1 /* Unused number */ -#define NETLINK_USERSOCK 2 /* Reserved for user mode socket protocols */ -#define NETLINK_FIREWALL 3 /* Unused number, formerly ip_queue */ -#define NETLINK_SOCK_DIAG 4 /* socket monitoring */ -#define NETLINK_NFLOG 5 /* netfilter/iptables ULOG */ -#define NETLINK_XFRM 6 /* ipsec */ -#define NETLINK_SELINUX 7 /* SELinux event notifications */ -#define NETLINK_ISCSI 8 /* Open-iSCSI */ -#define NETLINK_AUDIT 9 /* auditing */ -#define NETLINK_FIB_LOOKUP 10 -#define NETLINK_CONNECTOR 11 -#define NETLINK_NETFILTER 12 /* netfilter subsystem */ -#define NETLINK_IP6_FW 13 -#define NETLINK_DNRTMSG 14 /* DECnet routing messages */ -#define NETLINK_KOBJECT_UEVENT 15 /* Kernel messages to userspace */ -#define NETLINK_GENERIC 16 -/* leave room for NETLINK_DM (DM Events) */ -#define NETLINK_SCSITRANSPORT 18 /* SCSI Transports */ -#define NETLINK_ECRYPTFS 19 -#define NETLINK_RDMA 20 -#define NETLINK_CRYPTO 21 /* Crypto layer */ - -#define NETLINK_INET_DIAG NETLINK_SOCK_DIAG - -#define MAX_LINKS 32 - -struct sockaddr_nl { - __kernel_sa_family_t nl_family; /* AF_NETLINK */ - unsigned short nl_pad; /* zero */ - __u32 nl_pid; /* port ID */ - __u32 nl_groups; /* multicast groups mask */ -}; - -struct nlmsghdr { - __u32 nlmsg_len; /* Length of message including header */ - __u16 nlmsg_type; /* Message content */ - __u16 nlmsg_flags; /* Additional flags */ - __u32 nlmsg_seq; /* Sequence number */ - __u32 nlmsg_pid; /* Sending process port ID */ -}; - -/* Flags values */ - -#define NLM_F_REQUEST 1 /* It is request message. */ -#define NLM_F_MULTI 2 /* Multipart message, terminated by NLMSG_DONE */ -#define NLM_F_ACK 4 /* Reply with ack, with zero or error code */ -#define NLM_F_ECHO 8 /* Echo this request */ -#define NLM_F_DUMP_INTR 16 /* Dump was inconsistent due to sequence change */ - -/* Modifiers to GET request */ -#define NLM_F_ROOT 0x100 /* specify tree root */ -#define NLM_F_MATCH 0x200 /* return all matching */ -#define NLM_F_ATOMIC 0x400 /* atomic GET */ -#define NLM_F_DUMP (NLM_F_ROOT|NLM_F_MATCH) - -/* Modifiers to NEW request */ -#define NLM_F_REPLACE 0x100 /* Override existing */ -#define NLM_F_EXCL 0x200 /* Do not touch, if it exists */ -#define NLM_F_CREATE 0x400 /* Create, if it does not exist */ -#define NLM_F_APPEND 0x800 /* Add to end of list */ - -/* - 4.4BSD ADD NLM_F_CREATE|NLM_F_EXCL - 4.4BSD CHANGE NLM_F_REPLACE - - True CHANGE NLM_F_CREATE|NLM_F_REPLACE - Append NLM_F_CREATE - Check NLM_F_EXCL - */ - -#define NLMSG_ALIGNTO 4U -#define NLMSG_ALIGN(len) ( ((len)+NLMSG_ALIGNTO-1) & ~(NLMSG_ALIGNTO-1) ) -#define NLMSG_HDRLEN ((int) NLMSG_ALIGN(sizeof(struct nlmsghdr))) -#define NLMSG_LENGTH(len) ((len)+NLMSG_ALIGN(NLMSG_HDRLEN)) -#define NLMSG_SPACE(len) NLMSG_ALIGN(NLMSG_LENGTH(len)) -#define NLMSG_DATA(nlh) ((void*)(((char*)nlh) + NLMSG_LENGTH(0))) -#define NLMSG_NEXT(nlh,len) ((len) -= NLMSG_ALIGN((nlh)->nlmsg_len), \ - (struct nlmsghdr*)(((char*)(nlh)) + NLMSG_ALIGN((nlh)->nlmsg_len))) -#define NLMSG_OK(nlh,len) ((len) >= (int)sizeof(struct nlmsghdr) && \ - (nlh)->nlmsg_len >= sizeof(struct nlmsghdr) && \ - (nlh)->nlmsg_len <= (len)) -#define NLMSG_PAYLOAD(nlh,len) ((nlh)->nlmsg_len - NLMSG_SPACE((len))) - -#define NLMSG_NOOP 0x1 /* Nothing. */ -#define NLMSG_ERROR 0x2 /* Error */ -#define NLMSG_DONE 0x3 /* End of a dump */ -#define NLMSG_OVERRUN 0x4 /* Data lost */ - -#define NLMSG_MIN_TYPE 0x10 /* < 0x10: reserved control messages */ - -struct nlmsgerr { - int error; - struct nlmsghdr msg; -}; - -#define NETLINK_ADD_MEMBERSHIP 1 -#define NETLINK_DROP_MEMBERSHIP 2 -#define NETLINK_PKTINFO 3 -#define NETLINK_BROADCAST_ERROR 4 -#define NETLINK_NO_ENOBUFS 5 - -struct nl_pktinfo { - __u32 group; -}; - -#define NET_MAJOR 36 /* Major 36 is reserved for networking */ - -enum { - NETLINK_UNCONNECTED = 0, - NETLINK_CONNECTED, -}; - -/* - * <------- NLA_HDRLEN ------> <-- NLA_ALIGN(payload)--> - * +---------------------+- - -+- - - - - - - - - -+- - -+ - * | Header | Pad | Payload | Pad | - * | (struct nlattr) | ing | | ing | - * +---------------------+- - -+- - - - - - - - - -+- - -+ - * <-------------- nlattr->nla_len --------------> - */ - -struct nlattr { - __u16 nla_len; - __u16 nla_type; -}; - -/* - * nla_type (16 bits) - * +---+---+-------------------------------+ - * | N | O | Attribute Type | - * +---+---+-------------------------------+ - * N := Carries nested attributes - * O := Payload stored in network byte order - * - * Note: The N and O flag are mutually exclusive. - */ -#define NLA_F_NESTED (1 << 15) -#define NLA_F_NET_BYTEORDER (1 << 14) -#define NLA_TYPE_MASK ~(NLA_F_NESTED | NLA_F_NET_BYTEORDER) - -#define NLA_ALIGNTO 4 -#define NLA_ALIGN(len) (((len) + NLA_ALIGNTO - 1) & ~(NLA_ALIGNTO - 1)) -#define NLA_HDRLEN ((int) NLA_ALIGN(sizeof(struct nlattr))) - -#ifdef __KERNEL__ #include <linux/capability.h> #include <linux/skbuff.h> #include <linux/export.h> #include <net/scm.h> +#include <uapi/linux/netlink.h> struct net; @@ -283,6 +135,4 @@ static inline int netlink_dump_start(struct sock *ssk, struct sk_buff *skb, return __netlink_dump_start(ssk, skb, nlh, control); } -#endif /* __KERNEL__ */ - #endif /* __LINUX_NETLINK_H */ diff --git a/include/linux/nfs.h b/include/linux/nfs.h index 6d1fb63f592..3e794c12e90 100644 --- a/include/linux/nfs.h +++ b/include/linux/nfs.h @@ -7,130 +7,9 @@ #ifndef _LINUX_NFS_H #define _LINUX_NFS_H -#define NFS_PROGRAM 100003 -#define NFS_PORT 2049 -#define NFS_MAXDATA 8192 -#define NFS_MAXPATHLEN 1024 -#define NFS_MAXNAMLEN 255 -#define NFS_MAXGROUPS 16 -#define NFS_FHSIZE 32 -#define NFS_COOKIESIZE 4 -#define NFS_FIFO_DEV (-1) -#define NFSMODE_FMT 0170000 -#define NFSMODE_DIR 0040000 -#define NFSMODE_CHR 0020000 -#define NFSMODE_BLK 0060000 -#define NFSMODE_REG 0100000 -#define NFSMODE_LNK 0120000 -#define NFSMODE_SOCK 0140000 -#define NFSMODE_FIFO 0010000 - -#define NFS_MNT_PROGRAM 100005 -#define NFS_MNT_VERSION 1 -#define NFS_MNT3_VERSION 3 - -#define NFS_PIPE_DIRNAME "nfs" - -/* - * NFS stats. The good thing with these values is that NFSv3 errors are - * a superset of NFSv2 errors (with the exception of NFSERR_WFLUSH which - * no-one uses anyway), so we can happily mix code as long as we make sure - * no NFSv3 errors are returned to NFSv2 clients. - * Error codes that have a `--' in the v2 column are not part of the - * standard, but seem to be widely used nevertheless. - */ - enum nfs_stat { - NFS_OK = 0, /* v2 v3 v4 */ - NFSERR_PERM = 1, /* v2 v3 v4 */ - NFSERR_NOENT = 2, /* v2 v3 v4 */ - NFSERR_IO = 5, /* v2 v3 v4 */ - NFSERR_NXIO = 6, /* v2 v3 v4 */ - NFSERR_EAGAIN = 11, /* v2 v3 */ - NFSERR_ACCES = 13, /* v2 v3 v4 */ - NFSERR_EXIST = 17, /* v2 v3 v4 */ - NFSERR_XDEV = 18, /* v3 v4 */ - NFSERR_NODEV = 19, /* v2 v3 v4 */ - NFSERR_NOTDIR = 20, /* v2 v3 v4 */ - NFSERR_ISDIR = 21, /* v2 v3 v4 */ - NFSERR_INVAL = 22, /* v2 v3 v4 */ - NFSERR_FBIG = 27, /* v2 v3 v4 */ - NFSERR_NOSPC = 28, /* v2 v3 v4 */ - NFSERR_ROFS = 30, /* v2 v3 v4 */ - NFSERR_MLINK = 31, /* v3 v4 */ - NFSERR_OPNOTSUPP = 45, /* v2 v3 */ - NFSERR_NAMETOOLONG = 63, /* v2 v3 v4 */ - NFSERR_NOTEMPTY = 66, /* v2 v3 v4 */ - NFSERR_DQUOT = 69, /* v2 v3 v4 */ - NFSERR_STALE = 70, /* v2 v3 v4 */ - NFSERR_REMOTE = 71, /* v2 v3 */ - NFSERR_WFLUSH = 99, /* v2 */ - NFSERR_BADHANDLE = 10001, /* v3 v4 */ - NFSERR_NOT_SYNC = 10002, /* v3 */ - NFSERR_BAD_COOKIE = 10003, /* v3 v4 */ - NFSERR_NOTSUPP = 10004, /* v3 v4 */ - NFSERR_TOOSMALL = 10005, /* v3 v4 */ - NFSERR_SERVERFAULT = 10006, /* v3 v4 */ - NFSERR_BADTYPE = 10007, /* v3 v4 */ - NFSERR_JUKEBOX = 10008, /* v3 v4 */ - NFSERR_SAME = 10009, /* v4 */ - NFSERR_DENIED = 10010, /* v4 */ - NFSERR_EXPIRED = 10011, /* v4 */ - NFSERR_LOCKED = 10012, /* v4 */ - NFSERR_GRACE = 10013, /* v4 */ - NFSERR_FHEXPIRED = 10014, /* v4 */ - NFSERR_SHARE_DENIED = 10015, /* v4 */ - NFSERR_WRONGSEC = 10016, /* v4 */ - NFSERR_CLID_INUSE = 10017, /* v4 */ - NFSERR_RESOURCE = 10018, /* v4 */ - NFSERR_MOVED = 10019, /* v4 */ - NFSERR_NOFILEHANDLE = 10020, /* v4 */ - NFSERR_MINOR_VERS_MISMATCH = 10021, /* v4 */ - NFSERR_STALE_CLIENTID = 10022, /* v4 */ - NFSERR_STALE_STATEID = 10023, /* v4 */ - NFSERR_OLD_STATEID = 10024, /* v4 */ - NFSERR_BAD_STATEID = 10025, /* v4 */ - NFSERR_BAD_SEQID = 10026, /* v4 */ - NFSERR_NOT_SAME = 10027, /* v4 */ - NFSERR_LOCK_RANGE = 10028, /* v4 */ - NFSERR_SYMLINK = 10029, /* v4 */ - NFSERR_RESTOREFH = 10030, /* v4 */ - NFSERR_LEASE_MOVED = 10031, /* v4 */ - NFSERR_ATTRNOTSUPP = 10032, /* v4 */ - NFSERR_NO_GRACE = 10033, /* v4 */ - NFSERR_RECLAIM_BAD = 10034, /* v4 */ - NFSERR_RECLAIM_CONFLICT = 10035,/* v4 */ - NFSERR_BAD_XDR = 10036, /* v4 */ - NFSERR_LOCKS_HELD = 10037, /* v4 */ - NFSERR_OPENMODE = 10038, /* v4 */ - NFSERR_BADOWNER = 10039, /* v4 */ - NFSERR_BADCHAR = 10040, /* v4 */ - NFSERR_BADNAME = 10041, /* v4 */ - NFSERR_BAD_RANGE = 10042, /* v4 */ - NFSERR_LOCK_NOTSUPP = 10043, /* v4 */ - NFSERR_OP_ILLEGAL = 10044, /* v4 */ - NFSERR_DEADLOCK = 10045, /* v4 */ - NFSERR_FILE_OPEN = 10046, /* v4 */ - NFSERR_ADMIN_REVOKED = 10047, /* v4 */ - NFSERR_CB_PATH_DOWN = 10048, /* v4 */ -}; - -/* NFSv2 file types - beware, these are not the same in NFSv3 */ - -enum nfs_ftype { - NFNON = 0, - NFREG = 1, - NFDIR = 2, - NFBLK = 3, - NFCHR = 4, - NFLNK = 5, - NFSOCK = 6, - NFBAD = 7, - NFFIFO = 8 -}; - -#ifdef __KERNEL__ #include <linux/sunrpc/msg_prot.h> #include <linux/string.h> +#include <uapi/linux/nfs.h> /* * This is the kernel NFS client file handle representation @@ -169,5 +48,4 @@ enum nfs3_stable_how { NFS_DATA_SYNC = 1, NFS_FILE_SYNC = 2 }; -#endif /* __KERNEL__ */ #endif /* _LINUX_NFS_H */ diff --git a/include/linux/nfs3.h b/include/linux/nfs3.h index 6ccfe3b641e..a778ad8e3af 100644 --- a/include/linux/nfs3.h +++ b/include/linux/nfs3.h @@ -4,100 +4,10 @@ #ifndef _LINUX_NFS3_H #define _LINUX_NFS3_H -#define NFS3_PORT 2049 -#define NFS3_MAXDATA 32768 -#define NFS3_MAXPATHLEN PATH_MAX -#define NFS3_MAXNAMLEN NAME_MAX -#define NFS3_MAXGROUPS 16 -#define NFS3_FHSIZE 64 -#define NFS3_COOKIESIZE 4 -#define NFS3_CREATEVERFSIZE 8 -#define NFS3_COOKIEVERFSIZE 8 -#define NFS3_WRITEVERFSIZE 8 -#define NFS3_FIFO_DEV (-1) -#define NFS3MODE_FMT 0170000 -#define NFS3MODE_DIR 0040000 -#define NFS3MODE_CHR 0020000 -#define NFS3MODE_BLK 0060000 -#define NFS3MODE_REG 0100000 -#define NFS3MODE_LNK 0120000 -#define NFS3MODE_SOCK 0140000 -#define NFS3MODE_FIFO 0010000 +#include <uapi/linux/nfs3.h> -/* Flags for access() call */ -#define NFS3_ACCESS_READ 0x0001 -#define NFS3_ACCESS_LOOKUP 0x0002 -#define NFS3_ACCESS_MODIFY 0x0004 -#define NFS3_ACCESS_EXTEND 0x0008 -#define NFS3_ACCESS_DELETE 0x0010 -#define NFS3_ACCESS_EXECUTE 0x0020 -#define NFS3_ACCESS_FULL 0x003f - -/* Flags for create mode */ -enum nfs3_createmode { - NFS3_CREATE_UNCHECKED = 0, - NFS3_CREATE_GUARDED = 1, - NFS3_CREATE_EXCLUSIVE = 2 -}; - -/* NFSv3 file system properties */ -#define NFS3_FSF_LINK 0x0001 -#define NFS3_FSF_SYMLINK 0x0002 -#define NFS3_FSF_HOMOGENEOUS 0x0008 -#define NFS3_FSF_CANSETTIME 0x0010 -/* Some shorthands. See fs/nfsd/nfs3proc.c */ -#define NFS3_FSF_DEFAULT 0x001B -#define NFS3_FSF_BILLYBOY 0x0018 -#define NFS3_FSF_READONLY 0x0008 - -enum nfs3_ftype { - NF3NON = 0, - NF3REG = 1, - NF3DIR = 2, - NF3BLK = 3, - NF3CHR = 4, - NF3LNK = 5, - NF3SOCK = 6, - NF3FIFO = 7, /* changed from NFSv2 (was 8) */ - NF3BAD = 8 -}; - -struct nfs3_fh { - unsigned short size; - unsigned char data[NFS3_FHSIZE]; -}; - -#define NFS3_VERSION 3 -#define NFS3PROC_NULL 0 -#define NFS3PROC_GETATTR 1 -#define NFS3PROC_SETATTR 2 -#define NFS3PROC_LOOKUP 3 -#define NFS3PROC_ACCESS 4 -#define NFS3PROC_READLINK 5 -#define NFS3PROC_READ 6 -#define NFS3PROC_WRITE 7 -#define NFS3PROC_CREATE 8 -#define NFS3PROC_MKDIR 9 -#define NFS3PROC_SYMLINK 10 -#define NFS3PROC_MKNOD 11 -#define NFS3PROC_REMOVE 12 -#define NFS3PROC_RMDIR 13 -#define NFS3PROC_RENAME 14 -#define NFS3PROC_LINK 15 -#define NFS3PROC_READDIR 16 -#define NFS3PROC_READDIRPLUS 17 -#define NFS3PROC_FSSTAT 18 -#define NFS3PROC_FSINFO 19 -#define NFS3PROC_PATHCONF 20 -#define NFS3PROC_COMMIT 21 - -#define NFS_MNT3_VERSION 3 - - -#if defined(__KERNEL__) /* Number of 32bit words in post_op_attr */ #define NFS3_POST_OP_ATTR_WORDS 22 -#endif /* __KERNEL__ */ #endif /* _LINUX_NFS3_H */ diff --git a/include/linux/nfs4.h b/include/linux/nfs4.h index af2d2fa30ee..e111fa419a4 100644 --- a/include/linux/nfs4.h +++ b/include/linux/nfs4.h @@ -9,168 +9,11 @@ * Kendrick Smith <kmsmith@umich.edu> * Andy Adamson <andros@umich.edu> */ - #ifndef _LINUX_NFS4_H #define _LINUX_NFS4_H -#include <linux/types.h> - -#define NFS4_BITMAP_SIZE 2 -#define NFS4_VERIFIER_SIZE 8 -#define NFS4_STATEID_SEQID_SIZE 4 -#define NFS4_STATEID_OTHER_SIZE 12 -#define NFS4_STATEID_SIZE (NFS4_STATEID_SEQID_SIZE + NFS4_STATEID_OTHER_SIZE) -#define NFS4_FHSIZE 128 -#define NFS4_MAXPATHLEN PATH_MAX -#define NFS4_MAXNAMLEN NAME_MAX -#define NFS4_OPAQUE_LIMIT 1024 -#define NFS4_MAX_SESSIONID_LEN 16 - -#define NFS4_ACCESS_READ 0x0001 -#define NFS4_ACCESS_LOOKUP 0x0002 -#define NFS4_ACCESS_MODIFY 0x0004 -#define NFS4_ACCESS_EXTEND 0x0008 -#define NFS4_ACCESS_DELETE 0x0010 -#define NFS4_ACCESS_EXECUTE 0x0020 - -#define NFS4_FH_PERSISTENT 0x0000 -#define NFS4_FH_NOEXPIRE_WITH_OPEN 0x0001 -#define NFS4_FH_VOLATILE_ANY 0x0002 -#define NFS4_FH_VOL_MIGRATION 0x0004 -#define NFS4_FH_VOL_RENAME 0x0008 - -#define NFS4_OPEN_RESULT_CONFIRM 0x0002 -#define NFS4_OPEN_RESULT_LOCKTYPE_POSIX 0x0004 - -#define NFS4_SHARE_ACCESS_MASK 0x000F -#define NFS4_SHARE_ACCESS_READ 0x0001 -#define NFS4_SHARE_ACCESS_WRITE 0x0002 -#define NFS4_SHARE_ACCESS_BOTH 0x0003 -#define NFS4_SHARE_DENY_READ 0x0001 -#define NFS4_SHARE_DENY_WRITE 0x0002 -#define NFS4_SHARE_DENY_BOTH 0x0003 - -/* nfs41 */ -#define NFS4_SHARE_WANT_MASK 0xFF00 -#define NFS4_SHARE_WANT_NO_PREFERENCE 0x0000 -#define NFS4_SHARE_WANT_READ_DELEG 0x0100 -#define NFS4_SHARE_WANT_WRITE_DELEG 0x0200 -#define NFS4_SHARE_WANT_ANY_DELEG 0x0300 -#define NFS4_SHARE_WANT_NO_DELEG 0x0400 -#define NFS4_SHARE_WANT_CANCEL 0x0500 - -#define NFS4_SHARE_WHEN_MASK 0xF0000 -#define NFS4_SHARE_SIGNAL_DELEG_WHEN_RESRC_AVAIL 0x10000 -#define NFS4_SHARE_PUSH_DELEG_WHEN_UNCONTENDED 0x20000 - -#define NFS4_CDFC4_FORE 0x1 -#define NFS4_CDFC4_BACK 0x2 -#define NFS4_CDFC4_BOTH 0x3 -#define NFS4_CDFC4_FORE_OR_BOTH 0x3 -#define NFS4_CDFC4_BACK_OR_BOTH 0x7 - -#define NFS4_CDFS4_FORE 0x1 -#define NFS4_CDFS4_BACK 0x2 -#define NFS4_CDFS4_BOTH 0x3 - -#define NFS4_SET_TO_SERVER_TIME 0 -#define NFS4_SET_TO_CLIENT_TIME 1 - -#define NFS4_ACE_ACCESS_ALLOWED_ACE_TYPE 0 -#define NFS4_ACE_ACCESS_DENIED_ACE_TYPE 1 -#define NFS4_ACE_SYSTEM_AUDIT_ACE_TYPE 2 -#define NFS4_ACE_SYSTEM_ALARM_ACE_TYPE 3 - -#define ACL4_SUPPORT_ALLOW_ACL 0x01 -#define ACL4_SUPPORT_DENY_ACL 0x02 -#define ACL4_SUPPORT_AUDIT_ACL 0x04 -#define ACL4_SUPPORT_ALARM_ACL 0x08 - -#define NFS4_ACE_FILE_INHERIT_ACE 0x00000001 -#define NFS4_ACE_DIRECTORY_INHERIT_ACE 0x00000002 -#define NFS4_ACE_NO_PROPAGATE_INHERIT_ACE 0x00000004 -#define NFS4_ACE_INHERIT_ONLY_ACE 0x00000008 -#define NFS4_ACE_SUCCESSFUL_ACCESS_ACE_FLAG 0x00000010 -#define NFS4_ACE_FAILED_ACCESS_ACE_FLAG 0x00000020 -#define NFS4_ACE_IDENTIFIER_GROUP 0x00000040 - -#define NFS4_ACE_READ_DATA 0x00000001 -#define NFS4_ACE_LIST_DIRECTORY 0x00000001 -#define NFS4_ACE_WRITE_DATA 0x00000002 -#define NFS4_ACE_ADD_FILE 0x00000002 -#define NFS4_ACE_APPEND_DATA 0x00000004 -#define NFS4_ACE_ADD_SUBDIRECTORY 0x00000004 -#define NFS4_ACE_READ_NAMED_ATTRS 0x00000008 -#define NFS4_ACE_WRITE_NAMED_ATTRS 0x00000010 -#define NFS4_ACE_EXECUTE 0x00000020 -#define NFS4_ACE_DELETE_CHILD 0x00000040 -#define NFS4_ACE_READ_ATTRIBUTES 0x00000080 -#define NFS4_ACE_WRITE_ATTRIBUTES 0x00000100 -#define NFS4_ACE_DELETE 0x00010000 -#define NFS4_ACE_READ_ACL 0x00020000 -#define NFS4_ACE_WRITE_ACL 0x00040000 -#define NFS4_ACE_WRITE_OWNER 0x00080000 -#define NFS4_ACE_SYNCHRONIZE 0x00100000 -#define NFS4_ACE_GENERIC_READ 0x00120081 -#define NFS4_ACE_GENERIC_WRITE 0x00160106 -#define NFS4_ACE_GENERIC_EXECUTE 0x001200A0 -#define NFS4_ACE_MASK_ALL 0x001F01FF - -#define EXCHGID4_FLAG_SUPP_MOVED_REFER 0x00000001 -#define EXCHGID4_FLAG_SUPP_MOVED_MIGR 0x00000002 -#define EXCHGID4_FLAG_BIND_PRINC_STATEID 0x00000100 - -#define EXCHGID4_FLAG_USE_NON_PNFS 0x00010000 -#define EXCHGID4_FLAG_USE_PNFS_MDS 0x00020000 -#define EXCHGID4_FLAG_USE_PNFS_DS 0x00040000 -#define EXCHGID4_FLAG_MASK_PNFS 0x00070000 - -#define EXCHGID4_FLAG_UPD_CONFIRMED_REC_A 0x40000000 -#define EXCHGID4_FLAG_CONFIRMED_R 0x80000000 -/* - * Since the validity of these bits depends on whether - * they're set in the argument or response, have separate - * invalid flag masks for arg (_A) and resp (_R). - */ -#define EXCHGID4_FLAG_MASK_A 0x40070103 -#define EXCHGID4_FLAG_MASK_R 0x80070103 - -#define SEQ4_STATUS_CB_PATH_DOWN 0x00000001 -#define SEQ4_STATUS_CB_GSS_CONTEXTS_EXPIRING 0x00000002 -#define SEQ4_STATUS_CB_GSS_CONTEXTS_EXPIRED 0x00000004 -#define SEQ4_STATUS_EXPIRED_ALL_STATE_REVOKED 0x00000008 -#define SEQ4_STATUS_EXPIRED_SOME_STATE_REVOKED 0x00000010 -#define SEQ4_STATUS_ADMIN_STATE_REVOKED 0x00000020 -#define SEQ4_STATUS_RECALLABLE_STATE_REVOKED 0x00000040 -#define SEQ4_STATUS_LEASE_MOVED 0x00000080 -#define SEQ4_STATUS_RESTART_RECLAIM_NEEDED 0x00000100 -#define SEQ4_STATUS_CB_PATH_DOWN_SESSION 0x00000200 -#define SEQ4_STATUS_BACKCHANNEL_FAULT 0x00000400 - -#define NFS4_SECINFO_STYLE4_CURRENT_FH 0 -#define NFS4_SECINFO_STYLE4_PARENT 1 - -#define NFS4_MAX_UINT64 (~(u64)0) - -/* An NFS4 sessions server must support at least NFS4_MAX_OPS operations. - * If a compound requires more operations, adjust NFS4_MAX_OPS accordingly. - */ -#define NFS4_MAX_OPS 8 - -/* Our NFS4 client back channel server only wants the cb_sequene and the - * actual operation per compound - */ -#define NFS4_MAX_BACK_CHANNEL_OPS 2 - -enum nfs4_acl_whotype { - NFS4_ACL_WHO_NAMED = 0, - NFS4_ACL_WHO_OWNER, - NFS4_ACL_WHO_GROUP, - NFS4_ACL_WHO_EVERYONE, -}; - -#ifdef __KERNEL__ #include <linux/list.h> +#include <uapi/linux/nfs4.h> struct nfs4_ace { uint32_t type; @@ -673,10 +516,3 @@ struct nfs4_deviceid { }; #endif -#endif - -/* - * Local variables: - * c-basic-offset: 8 - * End: - */ diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h index 334a2f5f6bf..1cc25682b20 100644 --- a/include/linux/nfs_fs.h +++ b/include/linux/nfs_fs.h @@ -5,38 +5,11 @@ * * OS-specific nfs filesystem definitions and declarations */ - #ifndef _LINUX_NFS_FS_H #define _LINUX_NFS_FS_H -#include <linux/magic.h> - -/* Default timeout values */ -#define NFS_DEF_UDP_TIMEO (11) -#define NFS_DEF_UDP_RETRANS (3) -#define NFS_DEF_TCP_TIMEO (600) -#define NFS_DEF_TCP_RETRANS (2) - -#define NFS_MAX_UDP_TIMEOUT (60*HZ) -#define NFS_MAX_TCP_TIMEOUT (600*HZ) +#include <uapi/linux/nfs_fs.h> -#define NFS_DEF_ACREGMIN (3) -#define NFS_DEF_ACREGMAX (60) -#define NFS_DEF_ACDIRMIN (30) -#define NFS_DEF_ACDIRMAX (60) - -/* - * When flushing a cluster of dirty pages, there can be different - * strategies: - */ -#define FLUSH_SYNC 1 /* file being synced, or contention */ -#define FLUSH_STABLE 4 /* commit to stable storage */ -#define FLUSH_LOWPRI 8 /* low priority background flush */ -#define FLUSH_HIGHPRI 16 /* high priority memory reclaim flush */ -#define FLUSH_COND_STABLE 32 /* conditional stable write - only stable - * if everything fits in one RPC */ - -#ifdef __KERNEL__ /* * Enable dprintk() debugging support for nfs client. @@ -613,29 +586,6 @@ nfs_fileid_to_ino_t(u64 fileid) #define NFS_JUKEBOX_RETRY_TIME (5 * HZ) -#endif /* __KERNEL__ */ - -/* - * NFS debug flags - */ -#define NFSDBG_VFS 0x0001 -#define NFSDBG_DIRCACHE 0x0002 -#define NFSDBG_LOOKUPCACHE 0x0004 -#define NFSDBG_PAGECACHE 0x0008 -#define NFSDBG_PROC 0x0010 -#define NFSDBG_XDR 0x0020 -#define NFSDBG_FILE 0x0040 -#define NFSDBG_ROOT 0x0080 -#define NFSDBG_CALLBACK 0x0100 -#define NFSDBG_CLIENT 0x0200 -#define NFSDBG_MOUNT 0x0400 -#define NFSDBG_FSCACHE 0x0800 -#define NFSDBG_PNFS 0x1000 -#define NFSDBG_PNFS_LD 0x2000 -#define NFSDBG_STATE 0x4000 -#define NFSDBG_ALL 0xFFFF - -#ifdef __KERNEL__ # undef ifdebug # ifdef NFS_DEBUG @@ -645,6 +595,4 @@ nfs_fileid_to_ino_t(u64 fileid) # define ifdebug(fac) if (0) # define NFS_IFDEBUG(x) # endif -#endif /* __KERNEL */ - #endif diff --git a/include/linux/nfs_idmap.h b/include/linux/nfs_idmap.h index ece91c57ad7..2dcef3ab58b 100644 --- a/include/linux/nfs_idmap.h +++ b/include/linux/nfs_idmap.h @@ -33,35 +33,11 @@ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ - #ifndef NFS_IDMAP_H #define NFS_IDMAP_H -#include <linux/types.h> - -/* XXX from bits/utmp.h */ -#define IDMAP_NAMESZ 128 - -#define IDMAP_TYPE_USER 0 -#define IDMAP_TYPE_GROUP 1 - -#define IDMAP_CONV_IDTONAME 0 -#define IDMAP_CONV_NAMETOID 1 +#include <uapi/linux/nfs_idmap.h> -#define IDMAP_STATUS_INVALIDMSG 0x01 -#define IDMAP_STATUS_AGAIN 0x02 -#define IDMAP_STATUS_LOOKUPFAIL 0x04 -#define IDMAP_STATUS_SUCCESS 0x08 - -struct idmap_msg { - __u8 im_type; - __u8 im_conv; - char im_name[IDMAP_NAMESZ]; - __u32 im_id; - __u8 im_status; -}; - -#ifdef __KERNEL__ /* Forward declaration to make this header independent of others */ struct nfs_client; @@ -97,6 +73,4 @@ int nfs_map_uid_to_name(const struct nfs_server *, __u32, char *, size_t); int nfs_map_gid_to_group(const struct nfs_server *, __u32, char *, size_t); extern unsigned int nfs_idmap_cache_timeout; -#endif /* __KERNEL__ */ - #endif /* NFS_IDMAP_H */ diff --git a/include/linux/nfsacl.h b/include/linux/nfsacl.h index fabcb1e5c46..5e69e67b31a 100644 --- a/include/linux/nfsacl.h +++ b/include/linux/nfsacl.h @@ -6,30 +6,10 @@ #ifndef __LINUX_NFSACL_H #define __LINUX_NFSACL_H -#define NFS_ACL_PROGRAM 100227 - -#define ACLPROC2_GETACL 1 -#define ACLPROC2_SETACL 2 -#define ACLPROC2_GETATTR 3 -#define ACLPROC2_ACCESS 4 - -#define ACLPROC3_GETACL 1 -#define ACLPROC3_SETACL 2 - - -/* Flags for the getacl/setacl mode */ -#define NFS_ACL 0x0001 -#define NFS_ACLCNT 0x0002 -#define NFS_DFACL 0x0004 -#define NFS_DFACLCNT 0x0008 - -/* Flag for Default ACL entries */ -#define NFS_ACL_DEFAULT 0x1000 - -#ifdef __KERNEL__ #include <linux/posix_acl.h> #include <linux/sunrpc/xdr.h> +#include <uapi/linux/nfsacl.h> /* Maximum number of ACL entries over NFS */ #define NFS_ACL_MAX_ENTRIES 1024 @@ -58,5 +38,4 @@ extern int nfsacl_decode(struct xdr_buf *buf, unsigned int base, unsigned int *aclcnt, struct posix_acl **pacl); -#endif /* __KERNEL__ */ #endif /* __LINUX_NFSACL_H */ diff --git a/include/linux/nfsd/Kbuild b/include/linux/nfsd/Kbuild index 5b7d84ac954..e69de29bb2d 100644 --- a/include/linux/nfsd/Kbuild +++ b/include/linux/nfsd/Kbuild @@ -1,5 +0,0 @@ -header-y += cld.h -header-y += debug.h -header-y += export.h -header-y += nfsfh.h -header-y += stats.h diff --git a/include/linux/nfsd/debug.h b/include/linux/nfsd/debug.h index ee4aa91788e..19ef8375b57 100644 --- a/include/linux/nfsd/debug.h +++ b/include/linux/nfsd/debug.h @@ -5,44 +5,15 @@ * * Copyright (C) 1995 Olaf Kirch <okir@monad.swb.de> */ - #ifndef LINUX_NFSD_DEBUG_H #define LINUX_NFSD_DEBUG_H -#include <linux/sunrpc/debug.h> +#include <uapi/linux/nfsd/debug.h> -/* - * Enable debugging for nfsd. - * Requires RPC_DEBUG. - */ -#ifdef RPC_DEBUG -# define NFSD_DEBUG 1 -#endif - -/* - * knfsd debug flags - */ -#define NFSDDBG_SOCK 0x0001 -#define NFSDDBG_FH 0x0002 -#define NFSDDBG_EXPORT 0x0004 -#define NFSDDBG_SVC 0x0008 -#define NFSDDBG_PROC 0x0010 -#define NFSDDBG_FILEOP 0x0020 -#define NFSDDBG_AUTH 0x0040 -#define NFSDDBG_REPCACHE 0x0080 -#define NFSDDBG_XDR 0x0100 -#define NFSDDBG_LOCKD 0x0200 -#define NFSDDBG_ALL 0x7FFF -#define NFSDDBG_NOCHANGE 0xFFFF - - -#ifdef __KERNEL__ # undef ifdebug # ifdef NFSD_DEBUG # define ifdebug(flag) if (nfsd_debug & NFSDDBG_##flag) # else # define ifdebug(flag) if (0) # endif -#endif /* __KERNEL__ */ - #endif /* LINUX_NFSD_DEBUG_H */ diff --git a/include/linux/nfsd/export.h b/include/linux/nfsd/export.h index e33f747b173..24c139288db 100644 --- a/include/linux/nfsd/export.h +++ b/include/linux/nfsd/export.h @@ -6,58 +6,11 @@ * * Copyright (C) 1995-1997 Olaf Kirch <okir@monad.swb.de> */ - #ifndef NFSD_EXPORT_H #define NFSD_EXPORT_H -# include <linux/types.h> -#ifdef __KERNEL__ # include <linux/nfsd/nfsfh.h> -#endif - -/* - * Important limits for the exports stuff. - */ -#define NFSCLNT_IDMAX 1024 -#define NFSCLNT_ADDRMAX 16 -#define NFSCLNT_KEYMAX 32 - -/* - * Export flags. - */ -#define NFSEXP_READONLY 0x0001 -#define NFSEXP_INSECURE_PORT 0x0002 -#define NFSEXP_ROOTSQUASH 0x0004 -#define NFSEXP_ALLSQUASH 0x0008 -#define NFSEXP_ASYNC 0x0010 -#define NFSEXP_GATHERED_WRITES 0x0020 -/* 40 80 100 currently unused */ -#define NFSEXP_NOHIDE 0x0200 -#define NFSEXP_NOSUBTREECHECK 0x0400 -#define NFSEXP_NOAUTHNLM 0x0800 /* Don't authenticate NLM requests - just trust */ -#define NFSEXP_MSNFS 0x1000 /* do silly things that MS clients expect; no longer supported */ -#define NFSEXP_FSID 0x2000 -#define NFSEXP_CROSSMOUNT 0x4000 -#define NFSEXP_NOACL 0x8000 /* reserved for possible ACL related use */ -/* - * The NFSEXP_V4ROOT flag causes the kernel to give access only to NFSv4 - * clients, and only to the single directory that is the root of the - * export; further lookup and readdir operations are treated as if every - * subdirectory was a mountpoint, and ignored if they are not themselves - * exported. This is used by nfsd and mountd to construct the NFSv4 - * pseudofilesystem, which provides access only to paths leading to each - * exported filesystem. - */ -#define NFSEXP_V4ROOT 0x10000 -/* All flags that we claim to support. (Note we don't support NOACL.) */ -#define NFSEXP_ALLFLAGS 0x17E3F - -/* The flags that may vary depending on security flavor: */ -#define NFSEXP_SECINFO_FLAGS (NFSEXP_READONLY | NFSEXP_ROOTSQUASH \ - | NFSEXP_ALLSQUASH \ - | NFSEXP_INSECURE_PORT) - -#ifdef __KERNEL__ +#include <uapi/linux/nfsd/export.h> /* * FS Locations @@ -154,7 +107,4 @@ static inline void exp_get(struct svc_export *exp) } struct svc_export * rqst_exp_find(struct svc_rqst *, int, u32 *); -#endif /* __KERNEL__ */ - #endif /* NFSD_EXPORT_H */ - diff --git a/include/linux/nfsd/nfsfh.h b/include/linux/nfsd/nfsfh.h index fa63048fecf..a93593f1fa4 100644 --- a/include/linux/nfsd/nfsfh.h +++ b/include/linux/nfsd/nfsfh.h @@ -10,117 +10,11 @@ * * Copyright (C) 1995, 1996, 1997 Olaf Kirch <okir@monad.swb.de> */ - #ifndef _LINUX_NFSD_FH_H #define _LINUX_NFSD_FH_H -#include <linux/types.h> -#include <linux/nfs.h> -#include <linux/nfs2.h> -#include <linux/nfs3.h> -#include <linux/nfs4.h> -#ifdef __KERNEL__ # include <linux/sunrpc/svc.h> -#endif - -/* - * This is the old "dentry style" Linux NFSv2 file handle. - * - * The xino and xdev fields are currently used to transport the - * ino/dev of the exported inode. - */ -struct nfs_fhbase_old { - __u32 fb_dcookie; /* dentry cookie - always 0xfeebbaca */ - __u32 fb_ino; /* our inode number */ - __u32 fb_dirino; /* dir inode number, 0 for directories */ - __u32 fb_dev; /* our device */ - __u32 fb_xdev; - __u32 fb_xino; - __u32 fb_generation; -}; - -/* - * This is the new flexible, extensible style NFSv2/v3 file handle. - * by Neil Brown <neilb@cse.unsw.edu.au> - March 2000 - * - * The file handle starts with a sequence of four-byte words. - * The first word contains a version number (1) and three descriptor bytes - * that tell how the remaining 3 variable length fields should be handled. - * These three bytes are auth_type, fsid_type and fileid_type. - * - * All four-byte values are in host-byte-order. - * - * The auth_type field specifies how the filehandle can be authenticated - * This might allow a file to be confirmed to be in a writable part of a - * filetree without checking the path from it up to the root. - * Current values: - * 0 - No authentication. fb_auth is 0 bytes long - * Possible future values: - * 1 - 4 bytes taken from MD5 hash of the remainer of the file handle - * prefixed by a secret and with the important export flags. - * - * The fsid_type identifies how the filesystem (or export point) is - * encoded. - * Current values: - * 0 - 4 byte device id (ms-2-bytes major, ls-2-bytes minor), 4byte inode number - * NOTE: we cannot use the kdev_t device id value, because kdev_t.h - * says we mustn't. We must break it up and reassemble. - * 1 - 4 byte user specified identifier - * 2 - 4 byte major, 4 byte minor, 4 byte inode number - DEPRECATED - * 3 - 4 byte device id, encoded for user-space, 4 byte inode number - * 4 - 4 byte inode number and 4 byte uuid - * 5 - 8 byte uuid - * 6 - 16 byte uuid - * 7 - 8 byte inode number and 16 byte uuid - * - * The fileid_type identified how the file within the filesystem is encoded. - * This is (will be) passed to, and set by, the underlying filesystem if it supports - * filehandle operations. The filesystem must not use the value '0' or '0xff' and may - * only use the values 1 and 2 as defined below: - * Current values: - * 0 - The root, or export point, of the filesystem. fb_fileid is 0 bytes. - * 1 - 32bit inode number, 32 bit generation number. - * 2 - 32bit inode number, 32 bit generation number, 32 bit parent directory inode number. - * - */ -struct nfs_fhbase_new { - __u8 fb_version; /* == 1, even => nfs_fhbase_old */ - __u8 fb_auth_type; - __u8 fb_fsid_type; - __u8 fb_fileid_type; - __u32 fb_auth[1]; -/* __u32 fb_fsid[0]; floating */ -/* __u32 fb_fileid[0]; floating */ -}; - -struct knfsd_fh { - unsigned int fh_size; /* significant for NFSv3. - * Points to the current size while building - * a new file handle - */ - union { - struct nfs_fhbase_old fh_old; - __u32 fh_pad[NFS4_FHSIZE/4]; - struct nfs_fhbase_new fh_new; - } fh_base; -}; - -#define ofh_dcookie fh_base.fh_old.fb_dcookie -#define ofh_ino fh_base.fh_old.fb_ino -#define ofh_dirino fh_base.fh_old.fb_dirino -#define ofh_dev fh_base.fh_old.fb_dev -#define ofh_xdev fh_base.fh_old.fb_xdev -#define ofh_xino fh_base.fh_old.fb_xino -#define ofh_generation fh_base.fh_old.fb_generation - -#define fh_version fh_base.fh_new.fb_version -#define fh_fsid_type fh_base.fh_new.fb_fsid_type -#define fh_auth_type fh_base.fh_new.fb_auth_type -#define fh_fileid_type fh_base.fh_new.fb_fileid_type -#define fh_auth fh_base.fh_new.fb_auth -#define fh_fsid fh_base.fh_new.fb_auth - -#ifdef __KERNEL__ +#include <uapi/linux/nfsd/nfsfh.h> static inline __u32 ino_t_to_u32(ino_t ino) { @@ -166,7 +60,4 @@ typedef struct svc_fh { } svc_fh; -#endif /* __KERNEL__ */ - - #endif /* _LINUX_NFSD_FH_H */ diff --git a/include/linux/nfsd/stats.h b/include/linux/nfsd/stats.h index 2693ef647df..e75b2544ff1 100644 --- a/include/linux/nfsd/stats.h +++ b/include/linux/nfsd/stats.h @@ -5,16 +5,11 @@ * * Copyright (C) 1995, 1996 Olaf Kirch <okir@monad.swb.de> */ - #ifndef LINUX_NFSD_STATS_H #define LINUX_NFSD_STATS_H -#include <linux/nfs4.h> - -/* thread usage wraps very million seconds (approx one fortnight) */ -#define NFSD_USAGE_WRAP (HZ*1000000) +#include <uapi/linux/nfsd/stats.h> -#ifdef __KERNEL__ struct nfsd_stats { unsigned int rchits; /* repcache hits */ @@ -47,5 +42,4 @@ extern struct svc_stat nfsd_svcstats; void nfsd_stat_init(void); void nfsd_stat_shutdown(void); -#endif /* __KERNEL__ */ #endif /* LINUX_NFSD_STATS_H */ diff --git a/include/linux/nubus.h b/include/linux/nubus.h index e137b3c486a..a8696bbdfbc 100644 --- a/include/linux/nubus.h +++ b/include/linux/nubus.h @@ -8,236 +8,12 @@ Some of the constants in here are from the corresponding NetBSD/OpenBSD header file, by Allen Briggs. We figured out the rest of them on our own. */ - #ifndef LINUX_NUBUS_H #define LINUX_NUBUS_H -#include <linux/types.h> -#ifdef __KERNEL__ #include <asm/nubus.h> -#endif - -enum nubus_category { - NUBUS_CAT_BOARD = 0x0001, - NUBUS_CAT_DISPLAY = 0x0003, - NUBUS_CAT_NETWORK = 0x0004, - NUBUS_CAT_COMMUNICATIONS = 0x0006, - NUBUS_CAT_FONT = 0x0009, - NUBUS_CAT_CPU = 0x000A, - /* For lack of a better name */ - NUBUS_CAT_DUODOCK = 0x0020 -}; - -enum nubus_type_network { - NUBUS_TYPE_ETHERNET = 0x0001, - NUBUS_TYPE_RS232 = 0x0002 -}; - -enum nubus_type_display { - NUBUS_TYPE_VIDEO = 0x0001 -}; - -enum nubus_type_cpu { - NUBUS_TYPE_68020 = 0x0003, - NUBUS_TYPE_68030 = 0x0004, - NUBUS_TYPE_68040 = 0x0005 -}; - -/* Known <Cat,Type,SW,HW> tuples: (according to TattleTech and Slots) - * 68030 motherboards: <10,4,0,24> - * 68040 motherboards: <10,5,0,24> - * DuoDock Plus: <32,1,1,2> - * - * Toby Frame Buffer card: <3,1,1,1> - * RBV built-in video (IIci): <3,1,1,24> - * Valkyrie built-in video (Q630): <3,1,1,46> - * Macintosh Display Card: <3,1,1,25> - * Sonora built-in video (P460): <3,1,1,34> - * Jet framebuffer (DuoDock Plus): <3,1,1,41> - * - * SONIC comm-slot/on-board and DuoDock Ethernet: <4,1,1,272> - * SONIC LC-PDS Ethernet (Dayna, but like Apple 16-bit, sort of): <4,1,1,271> - * Apple SONIC LC-PDS Ethernet ("Apple Ethernet LC Twisted-Pair Card"): <4,1,0,281> - * Sonic Systems Ethernet A-Series Card: <4,1,268,256> - * Asante MacCon NuBus-A: <4,1,260,256> (alpha-1.0,1.1 revision) - * ROM on the above card: <2,1,0,0> - * Cabletron ethernet card: <4,1,1,265> - * Farallon ethernet card: <4,1,268,256> (identical to Sonic Systems card) - * Kinetics EtherPort IIN: <4,1,259,262> - * API Engineering EtherRun_LCa PDS enet card: <4,1,282,256> - * - * Add your devices to the list! You can obtain the "Slots" utility - * from Apple's FTP site at: - * ftp://dev.apple.com/devworld/Tool_Chest/Devices_-_Hardware/NuBus_Slot_Manager/ - * - * Alternately, TattleTech can be found at any Info-Mac mirror site. - * or from its distribution site: ftp://ftp.decismkr.com/dms - */ - -/* DrSW: Uniquely identifies the software interface to a board. This - is usually the one you want to look at when writing a driver. It's - not as useful as you think, though, because as we should know by - now (duh), "Apple Compatible" can mean a lot of things... */ - -/* Add known DrSW values here */ -enum nubus_drsw { - /* NUBUS_CAT_DISPLAY */ - NUBUS_DRSW_APPLE = 0x0001, - NUBUS_DRSW_APPLE_HIRES = 0x0013, /* MacII HiRes card driver */ - - /* NUBUS_CAT_NETWORK */ - NUBUS_DRSW_3COM = 0x0000, - NUBUS_DRSW_CABLETRON = 0x0001, - NUBUS_DRSW_SONIC_LC = 0x0001, - NUBUS_DRSW_KINETICS = 0x0103, - NUBUS_DRSW_ASANTE = 0x0104, - NUBUS_DRSW_TECHWORKS = 0x0109, - NUBUS_DRSW_DAYNA = 0x010b, - NUBUS_DRSW_FARALLON = 0x010c, - NUBUS_DRSW_APPLE_SN = 0x010f, - NUBUS_DRSW_DAYNA2 = 0x0115, - NUBUS_DRSW_FOCUS = 0x011a, - NUBUS_DRSW_ASANTE_CS = 0x011d, /* use asante SMC9194 driver */ - NUBUS_DRSW_DAYNA_LC = 0x011e, - - /* NUBUS_CAT_CPU */ - NUBUS_DRSW_NONE = 0x0000, -}; - -/* DrHW: Uniquely identifies the hardware interface to a board (or at - least, it should... some video cards are known to incorrectly - identify themselves as Toby cards) */ - -/* Add known DrHW values here */ -enum nubus_drhw { - /* NUBUS_CAT_DISPLAY */ - NUBUS_DRHW_APPLE_TFB = 0x0001, /* Toby frame buffer card */ - NUBUS_DRHW_APPLE_WVC = 0x0006, /* Apple Workstation Video Card */ - NUBUS_DRHW_SIGMA_CLRMAX = 0x0007, /* Sigma Design ColorMax */ - NUBUS_DRHW_APPLE_SE30 = 0x0009, /* Apple SE/30 video */ - NUBUS_DRHW_APPLE_HRVC = 0x0013, /* Mac II High-Res Video Card */ - NUBUS_DRHW_APPLE_PVC = 0x0017, /* Mac II Portrait Video Card */ - NUBUS_DRHW_APPLE_RBV1 = 0x0018, /* IIci RBV video */ - NUBUS_DRHW_APPLE_MDC = 0x0019, /* Macintosh Display Card */ - NUBUS_DRHW_APPLE_SONORA = 0x0022, /* Sonora built-in video */ - NUBUS_DRHW_APPLE_24AC = 0x002b, /* Mac 24AC Video Card */ - NUBUS_DRHW_APPLE_VALKYRIE = 0x002e, - NUBUS_DRHW_APPLE_JET = 0x0029, /* Jet framebuffer (DuoDock) */ - NUBUS_DRHW_SMAC_GFX = 0x0105, /* SuperMac GFX */ - NUBUS_DRHW_RASTER_CB264 = 0x013B, /* RasterOps ColorBoard 264 */ - NUBUS_DRHW_MICRON_XCEED = 0x0146, /* Micron Exceed color */ - NUBUS_DRHW_RDIUS_GSC = 0x0153, /* Radius GS/C */ - NUBUS_DRHW_SMAC_SPEC8 = 0x017B, /* SuperMac Spectrum/8 */ - NUBUS_DRHW_SMAC_SPEC24 = 0x017C, /* SuperMac Spectrum/24 */ - NUBUS_DRHW_RASTER_CB364 = 0x026F, /* RasterOps ColorBoard 364 */ - NUBUS_DRHW_RDIUS_DCGX = 0x027C, /* Radius DirectColor/GX */ - NUBUS_DRHW_RDIUS_PC8 = 0x0291, /* Radius PrecisionColor 8 */ - NUBUS_DRHW_LAPIS_PCS8 = 0x0292, /* Lapis ProColorServer 8 */ - NUBUS_DRHW_RASTER_24XLI = 0x02A0, /* RasterOps 8/24 XLi */ - NUBUS_DRHW_RASTER_PBPGT = 0x02A5, /* RasterOps PaintBoard Prism GT */ - NUBUS_DRHW_EMACH_FSX = 0x02AE, /* E-Machines Futura SX */ - NUBUS_DRHW_RASTER_24XLTV = 0x02B7, /* RasterOps 24XLTV */ - NUBUS_DRHW_SMAC_THUND24 = 0x02CB, /* SuperMac Thunder/24 */ - NUBUS_DRHW_SMAC_THUNDLGHT = 0x03D9, /* SuperMac ThunderLight */ - NUBUS_DRHW_RDIUS_PC24XP = 0x0406, /* Radius PrecisionColor 24Xp */ - NUBUS_DRHW_RDIUS_PC24X = 0x040A, /* Radius PrecisionColor 24X */ - NUBUS_DRHW_RDIUS_PC8XJ = 0x040B, /* Radius PrecisionColor 8XJ */ - - /* NUBUS_CAT_NETWORK */ - NUBUS_DRHW_INTERLAN = 0x0100, - NUBUS_DRHW_SMC9194 = 0x0101, - NUBUS_DRHW_KINETICS = 0x0106, - NUBUS_DRHW_CABLETRON = 0x0109, - NUBUS_DRHW_ASANTE_LC = 0x010f, - NUBUS_DRHW_SONIC = 0x0110, - NUBUS_DRHW_TECHWORKS = 0x0112, - NUBUS_DRHW_APPLE_SONIC_NB = 0x0118, - NUBUS_DRHW_APPLE_SONIC_LC = 0x0119, - NUBUS_DRHW_FOCUS = 0x011c, - NUBUS_DRHW_SONNET = 0x011d, -}; +#include <uapi/linux/nubus.h> -/* Resource IDs: These are the identifiers for the various weird and - wonderful tidbits of information that may or may not reside in the - NuBus ROM directory. */ -enum nubus_res_id { - NUBUS_RESID_TYPE = 0x0001, - NUBUS_RESID_NAME = 0x0002, - NUBUS_RESID_ICON = 0x0003, - NUBUS_RESID_DRVRDIR = 0x0004, - NUBUS_RESID_LOADREC = 0x0005, - NUBUS_RESID_BOOTREC = 0x0006, - NUBUS_RESID_FLAGS = 0x0007, - NUBUS_RESID_HWDEVID = 0x0008, - NUBUS_RESID_MINOR_BASEOS = 0x000a, - NUBUS_RESID_MINOR_LENGTH = 0x000b, - NUBUS_RESID_MAJOR_BASEOS = 0x000c, - NUBUS_RESID_MAJOR_LENGTH = 0x000d, - NUBUS_RESID_CICN = 0x000f, - NUBUS_RESID_ICL8 = 0x0010, - NUBUS_RESID_ICL4 = 0x0011, -}; - -/* Category-specific resources. */ -enum nubus_board_res_id { - NUBUS_RESID_BOARDID = 0x0020, - NUBUS_RESID_PRAMINITDATA = 0x0021, - NUBUS_RESID_PRIMARYINIT = 0x0022, - NUBUS_RESID_TIMEOUTCONST = 0x0023, - NUBUS_RESID_VENDORINFO = 0x0024, - NUBUS_RESID_BOARDFLAGS = 0x0025, - NUBUS_RESID_SECONDINIT = 0x0026, - - /* Not sure why Apple put these next two in here */ - NUBUS_RESID_VIDNAMES = 0x0041, - NUBUS_RESID_VIDMODES = 0x007e -}; - -/* Fields within the vendor info directory */ -enum nubus_vendor_res_id { - NUBUS_RESID_VEND_ID = 0x0001, - NUBUS_RESID_VEND_SERIAL = 0x0002, - NUBUS_RESID_VEND_REV = 0x0003, - NUBUS_RESID_VEND_PART = 0x0004, - NUBUS_RESID_VEND_DATE = 0x0005 -}; - -enum nubus_net_res_id { - NUBUS_RESID_MAC_ADDRESS = 0x0080 -}; - -enum nubus_cpu_res_id { - NUBUS_RESID_MEMINFO = 0x0081, - NUBUS_RESID_ROMINFO = 0x0082 -}; - -enum nubus_display_res_id { - NUBUS_RESID_GAMMADIR = 0x0040, - NUBUS_RESID_FIRSTMODE = 0x0080, - NUBUS_RESID_SECONDMODE = 0x0081, - NUBUS_RESID_THIRDMODE = 0x0082, - NUBUS_RESID_FOURTHMODE = 0x0083, - NUBUS_RESID_FIFTHMODE = 0x0084, - NUBUS_RESID_SIXTHMODE = 0x0085 -}; - -struct nubus_dir -{ - unsigned char *base; - unsigned char *ptr; - int done; - int mask; -}; - -struct nubus_dirent -{ - unsigned char *base; - unsigned char type; - __u32 data; /* Actually 24bits used */ - int mask; -}; - -#ifdef __KERNEL__ struct nubus_board { struct nubus_board* next; struct nubus_dev* first_dev; @@ -352,12 +128,4 @@ void nubus_get_rsrc_mem(void* dest, void nubus_get_rsrc_str(void* dest, const struct nubus_dirent *dirent, int maxlen); -#endif /* __KERNEL__ */ - -/* We'd like to get rid of this eventually. Only daynaport.c uses it now. */ -static inline void *nubus_slot_addr(int slot) -{ - return (void *)(0xF0000000|(slot<<24)); -} - #endif /* LINUX_NUBUS_H */ diff --git a/include/linux/nvram.h b/include/linux/nvram.h index 9189829c131..cf0ff555a6a 100644 --- a/include/linux/nvram.h +++ b/include/linux/nvram.h @@ -1,18 +1,8 @@ #ifndef _LINUX_NVRAM_H #define _LINUX_NVRAM_H -#include <linux/ioctl.h> +#include <uapi/linux/nvram.h> -/* /dev/nvram ioctls */ -#define NVRAM_INIT _IO('p', 0x40) /* initialize NVRAM and set checksum */ -#define NVRAM_SETCKS _IO('p', 0x41) /* recalculate checksum */ - -/* for all current systems, this is where NVRAM starts */ -#define NVRAM_FIRST_BYTE 14 -/* all these functions expect an NVRAM offset, not an absolute */ -#define NVRAM_OFFSET(x) ((x)-NVRAM_FIRST_BYTE) - -#ifdef __KERNEL__ /* __foo is foo without grabbing the rtc_lock - get it yourself */ extern unsigned char __nvram_read_byte(int i); extern unsigned char nvram_read_byte(int i); @@ -20,6 +10,4 @@ extern void __nvram_write_byte(unsigned char c, int i); extern void nvram_write_byte(unsigned char c, int i); extern int __nvram_check_checksum(void); extern int nvram_check_checksum(void); -#endif - #endif /* _LINUX_NVRAM_H */ diff --git a/include/linux/of_mdio.h b/include/linux/of_mdio.h index 6ef49b803ef..8163107b94b 100644 --- a/include/linux/of_mdio.h +++ b/include/linux/of_mdio.h @@ -26,32 +26,32 @@ extern struct phy_device *of_phy_connect_fixed_link(struct net_device *dev, extern struct mii_bus *of_mdio_find_bus(struct device_node *mdio_np); #else /* CONFIG_OF */ -int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np) +static inline int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np) { return -ENOSYS; } -struct phy_device *of_phy_find_device(struct device_node *phy_np) +static inline struct phy_device *of_phy_find_device(struct device_node *phy_np) { return NULL; } -struct phy_device *of_phy_connect(struct net_device *dev, - struct device_node *phy_np, - void (*hndlr)(struct net_device *), - u32 flags, phy_interface_t iface) +static inline struct phy_device *of_phy_connect(struct net_device *dev, + struct device_node *phy_np, + void (*hndlr)(struct net_device *), + u32 flags, phy_interface_t iface) { return NULL; } -struct phy_device *of_phy_connect_fixed_link(struct net_device *dev, - void (*hndlr)(struct net_device *), - phy_interface_t iface) +static inline struct phy_device *of_phy_connect_fixed_link(struct net_device *dev, + void (*hndlr)(struct net_device *), + phy_interface_t iface) { return NULL; } -struct mii_bus *of_mdio_find_bus(struct device_node *mdio_np) +static inline struct mii_bus *of_mdio_find_bus(struct device_node *mdio_np) { return NULL; } diff --git a/include/linux/oid_registry.h b/include/linux/oid_registry.h new file mode 100644 index 00000000000..6926db72425 --- /dev/null +++ b/include/linux/oid_registry.h @@ -0,0 +1,92 @@ +/* ASN.1 Object identifier (OID) registry + * + * Copyright (C) 2012 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _LINUX_OID_REGISTRY_H +#define _LINUX_OID_REGISTRY_H + +#include <linux/types.h> + +/* + * OIDs are turned into these values if possible, or OID__NR if not held here. + * + * NOTE! Do not mess with the format of each line as this is read by + * build_OID_registry.pl to generate the data for look_up_OID(). + */ +enum OID { + OID_id_dsa_with_sha1, /* 1.2.840.10030.4.3 */ + OID_id_dsa, /* 1.2.840.10040.4.1 */ + OID_id_ecdsa_with_sha1, /* 1.2.840.10045.4.1 */ + OID_id_ecPublicKey, /* 1.2.840.10045.2.1 */ + + /* PKCS#1 {iso(1) member-body(2) us(840) rsadsi(113549) pkcs(1) pkcs-1(1)} */ + OID_rsaEncryption, /* 1.2.840.113549.1.1.1 */ + OID_md2WithRSAEncryption, /* 1.2.840.113549.1.1.2 */ + OID_md3WithRSAEncryption, /* 1.2.840.113549.1.1.3 */ + OID_md4WithRSAEncryption, /* 1.2.840.113549.1.1.4 */ + OID_sha1WithRSAEncryption, /* 1.2.840.113549.1.1.5 */ + OID_sha256WithRSAEncryption, /* 1.2.840.113549.1.1.11 */ + OID_sha384WithRSAEncryption, /* 1.2.840.113549.1.1.12 */ + OID_sha512WithRSAEncryption, /* 1.2.840.113549.1.1.13 */ + OID_sha224WithRSAEncryption, /* 1.2.840.113549.1.1.14 */ + /* PKCS#7 {iso(1) member-body(2) us(840) rsadsi(113549) pkcs(1) pkcs-7(7)} */ + OID_data, /* 1.2.840.113549.1.7.1 */ + OID_signed_data, /* 1.2.840.113549.1.7.2 */ + /* PKCS#9 {iso(1) member-body(2) us(840) rsadsi(113549) pkcs(1) pkcs-9(9)} */ + OID_email_address, /* 1.2.840.113549.1.9.1 */ + OID_content_type, /* 1.2.840.113549.1.9.3 */ + OID_messageDigest, /* 1.2.840.113549.1.9.4 */ + OID_signingTime, /* 1.2.840.113549.1.9.5 */ + OID_smimeCapabilites, /* 1.2.840.113549.1.9.15 */ + OID_smimeAuthenticatedAttrs, /* 1.2.840.113549.1.9.16.2.11 */ + + /* {iso(1) member-body(2) us(840) rsadsi(113549) digestAlgorithm(2)} */ + OID_md2, /* 1.2.840.113549.2.2 */ + OID_md4, /* 1.2.840.113549.2.4 */ + OID_md5, /* 1.2.840.113549.2.5 */ + + OID_certAuthInfoAccess, /* 1.3.6.1.5.5.7.1.1 */ + OID_msOutlookExpress, /* 1.3.6.1.4.1.311.16.4 */ + OID_sha1, /* 1.3.14.3.2.26 */ + + /* Distinguished Name attribute IDs [RFC 2256] */ + OID_commonName, /* 2.5.4.3 */ + OID_surname, /* 2.5.4.4 */ + OID_countryName, /* 2.5.4.6 */ + OID_locality, /* 2.5.4.7 */ + OID_stateOrProvinceName, /* 2.5.4.8 */ + OID_organizationName, /* 2.5.4.10 */ + OID_organizationUnitName, /* 2.5.4.11 */ + OID_title, /* 2.5.4.12 */ + OID_description, /* 2.5.4.13 */ + OID_name, /* 2.5.4.41 */ + OID_givenName, /* 2.5.4.42 */ + OID_initials, /* 2.5.4.43 */ + OID_generationalQualifier, /* 2.5.4.44 */ + + /* Certificate extension IDs */ + OID_subjectKeyIdentifier, /* 2.5.29.14 */ + OID_keyUsage, /* 2.5.29.15 */ + OID_subjectAltName, /* 2.5.29.17 */ + OID_issuerAltName, /* 2.5.29.18 */ + OID_basicConstraints, /* 2.5.29.19 */ + OID_crlDistributionPoints, /* 2.5.29.31 */ + OID_certPolicies, /* 2.5.29.32 */ + OID_authorityKeyIdentifier, /* 2.5.29.35 */ + OID_extKeyUsage, /* 2.5.29.37 */ + + OID__NR +}; + +extern enum OID look_up_OID(const void *data, size_t datasize); +extern int sprint_oid(const void *, size_t, char *, size_t); +extern int sprint_OID(enum OID, char *, size_t); + +#endif /* _LINUX_OID_REGISTRY_H */ diff --git a/include/linux/omapfb.h b/include/linux/omapfb.h index 85af8184691..d1f4dccaeed 100644 --- a/include/linux/omapfb.h +++ b/include/linux/omapfb.h @@ -20,205 +20,11 @@ * with this program; if not, write to the Free Software Foundation, Inc., * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ - #ifndef __LINUX_OMAPFB_H__ #define __LINUX_OMAPFB_H__ -#include <linux/fb.h> -#include <linux/ioctl.h> -#include <linux/types.h> - -/* IOCTL commands. */ - -#define OMAP_IOW(num, dtype) _IOW('O', num, dtype) -#define OMAP_IOR(num, dtype) _IOR('O', num, dtype) -#define OMAP_IOWR(num, dtype) _IOWR('O', num, dtype) -#define OMAP_IO(num) _IO('O', num) - -#define OMAPFB_MIRROR OMAP_IOW(31, int) -#define OMAPFB_SYNC_GFX OMAP_IO(37) -#define OMAPFB_VSYNC OMAP_IO(38) -#define OMAPFB_SET_UPDATE_MODE OMAP_IOW(40, int) -#define OMAPFB_GET_CAPS OMAP_IOR(42, struct omapfb_caps) -#define OMAPFB_GET_UPDATE_MODE OMAP_IOW(43, int) -#define OMAPFB_LCD_TEST OMAP_IOW(45, int) -#define OMAPFB_CTRL_TEST OMAP_IOW(46, int) -#define OMAPFB_UPDATE_WINDOW_OLD OMAP_IOW(47, struct omapfb_update_window_old) -#define OMAPFB_SET_COLOR_KEY OMAP_IOW(50, struct omapfb_color_key) -#define OMAPFB_GET_COLOR_KEY OMAP_IOW(51, struct omapfb_color_key) -#define OMAPFB_SETUP_PLANE OMAP_IOW(52, struct omapfb_plane_info) -#define OMAPFB_QUERY_PLANE OMAP_IOW(53, struct omapfb_plane_info) -#define OMAPFB_UPDATE_WINDOW OMAP_IOW(54, struct omapfb_update_window) -#define OMAPFB_SETUP_MEM OMAP_IOW(55, struct omapfb_mem_info) -#define OMAPFB_QUERY_MEM OMAP_IOW(56, struct omapfb_mem_info) -#define OMAPFB_WAITFORVSYNC OMAP_IO(57) -#define OMAPFB_MEMORY_READ OMAP_IOR(58, struct omapfb_memory_read) -#define OMAPFB_GET_OVERLAY_COLORMODE OMAP_IOR(59, struct omapfb_ovl_colormode) -#define OMAPFB_WAITFORGO OMAP_IO(60) -#define OMAPFB_GET_VRAM_INFO OMAP_IOR(61, struct omapfb_vram_info) -#define OMAPFB_SET_TEARSYNC OMAP_IOW(62, struct omapfb_tearsync_info) -#define OMAPFB_GET_DISPLAY_INFO OMAP_IOR(63, struct omapfb_display_info) - -#define OMAPFB_CAPS_GENERIC_MASK 0x00000fff -#define OMAPFB_CAPS_LCDC_MASK 0x00fff000 -#define OMAPFB_CAPS_PANEL_MASK 0xff000000 - -#define OMAPFB_CAPS_MANUAL_UPDATE 0x00001000 -#define OMAPFB_CAPS_TEARSYNC 0x00002000 -#define OMAPFB_CAPS_PLANE_RELOCATE_MEM 0x00004000 -#define OMAPFB_CAPS_PLANE_SCALE 0x00008000 -#define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE 0x00010000 -#define OMAPFB_CAPS_WINDOW_SCALE 0x00020000 -#define OMAPFB_CAPS_WINDOW_OVERLAY 0x00040000 -#define OMAPFB_CAPS_WINDOW_ROTATE 0x00080000 -#define OMAPFB_CAPS_SET_BACKLIGHT 0x01000000 - -/* Values from DSP must map to lower 16-bits */ -#define OMAPFB_FORMAT_MASK 0x00ff -#define OMAPFB_FORMAT_FLAG_DOUBLE 0x0100 -#define OMAPFB_FORMAT_FLAG_TEARSYNC 0x0200 -#define OMAPFB_FORMAT_FLAG_FORCE_VSYNC 0x0400 -#define OMAPFB_FORMAT_FLAG_ENABLE_OVERLAY 0x0800 -#define OMAPFB_FORMAT_FLAG_DISABLE_OVERLAY 0x1000 - -#define OMAPFB_MEMTYPE_SDRAM 0 -#define OMAPFB_MEMTYPE_SRAM 1 -#define OMAPFB_MEMTYPE_MAX 1 - -#define OMAPFB_MEM_IDX_ENABLED 0x80 -#define OMAPFB_MEM_IDX_MASK 0x7f - -enum omapfb_color_format { - OMAPFB_COLOR_RGB565 = 0, - OMAPFB_COLOR_YUV422, - OMAPFB_COLOR_YUV420, - OMAPFB_COLOR_CLUT_8BPP, - OMAPFB_COLOR_CLUT_4BPP, - OMAPFB_COLOR_CLUT_2BPP, - OMAPFB_COLOR_CLUT_1BPP, - OMAPFB_COLOR_RGB444, - OMAPFB_COLOR_YUY422, - - OMAPFB_COLOR_ARGB16, - OMAPFB_COLOR_RGB24U, /* RGB24, 32-bit container */ - OMAPFB_COLOR_RGB24P, /* RGB24, 24-bit container */ - OMAPFB_COLOR_ARGB32, - OMAPFB_COLOR_RGBA32, - OMAPFB_COLOR_RGBX32, -}; - -struct omapfb_update_window { - __u32 x, y; - __u32 width, height; - __u32 format; - __u32 out_x, out_y; - __u32 out_width, out_height; - __u32 reserved[8]; -}; +#include <uapi/linux/omapfb.h> -struct omapfb_update_window_old { - __u32 x, y; - __u32 width, height; - __u32 format; -}; - -enum omapfb_plane { - OMAPFB_PLANE_GFX = 0, - OMAPFB_PLANE_VID1, - OMAPFB_PLANE_VID2, -}; - -enum omapfb_channel_out { - OMAPFB_CHANNEL_OUT_LCD = 0, - OMAPFB_CHANNEL_OUT_DIGIT, -}; - -struct omapfb_plane_info { - __u32 pos_x; - __u32 pos_y; - __u8 enabled; - __u8 channel_out; - __u8 mirror; - __u8 mem_idx; - __u32 out_width; - __u32 out_height; - __u32 reserved2[12]; -}; - -struct omapfb_mem_info { - __u32 size; - __u8 type; - __u8 reserved[3]; -}; - -struct omapfb_caps { - __u32 ctrl; - __u32 plane_color; - __u32 wnd_color; -}; - -enum omapfb_color_key_type { - OMAPFB_COLOR_KEY_DISABLED = 0, - OMAPFB_COLOR_KEY_GFX_DST, - OMAPFB_COLOR_KEY_VID_SRC, -}; - -struct omapfb_color_key { - __u8 channel_out; - __u32 background; - __u32 trans_key; - __u8 key_type; -}; - -enum omapfb_update_mode { - OMAPFB_UPDATE_DISABLED = 0, - OMAPFB_AUTO_UPDATE, - OMAPFB_MANUAL_UPDATE -}; - -struct omapfb_memory_read { - __u16 x; - __u16 y; - __u16 w; - __u16 h; - size_t buffer_size; - void __user *buffer; -}; - -struct omapfb_ovl_colormode { - __u8 overlay_idx; - __u8 mode_idx; - __u32 bits_per_pixel; - __u32 nonstd; - struct fb_bitfield red; - struct fb_bitfield green; - struct fb_bitfield blue; - struct fb_bitfield transp; -}; - -struct omapfb_vram_info { - __u32 total; - __u32 free; - __u32 largest_free_block; - __u32 reserved[5]; -}; - -struct omapfb_tearsync_info { - __u8 enabled; - __u8 reserved1[3]; - __u16 line; - __u16 reserved2; -}; - -struct omapfb_display_info { - __u16 xres; - __u16 yres; - __u32 width; /* phys width of the display in micrometers */ - __u32 height; /* phys height of the display in micrometers */ - __u32 reserved[5]; -}; - -#ifdef __KERNEL__ struct omap_lcd_config { char panel_name[16]; @@ -233,6 +39,4 @@ struct omapfb_platform_data { void __init omapfb_set_lcd_config(const struct omap_lcd_config *config); -#endif - #endif /* __OMAPFB_H */ diff --git a/include/linux/oom.h b/include/linux/oom.h index d36a8221f58..fb9826847b8 100644 --- a/include/linux/oom.h +++ b/include/linux/oom.h @@ -1,18 +1,11 @@ #ifndef __INCLUDE_LINUX_OOM_H #define __INCLUDE_LINUX_OOM_H -/* - * /proc/<pid>/oom_score_adj set to OOM_SCORE_ADJ_MIN disables oom killing for - * pid. - */ -#define OOM_SCORE_ADJ_MIN (-1000) -#define OOM_SCORE_ADJ_MAX 1000 - -#ifdef __KERNEL__ #include <linux/sched.h> #include <linux/types.h> #include <linux/nodemask.h> +#include <uapi/linux/oom.h> struct zonelist; struct notifier_block; @@ -82,5 +75,4 @@ extern struct task_struct *find_lock_task_mm(struct task_struct *p); extern int sysctl_oom_dump_tasks; extern int sysctl_oom_kill_allocating_task; extern int sysctl_panic_on_oom; -#endif /* __KERNEL__*/ #endif /* _INCLUDE_LINUX_OOM_H */ diff --git a/include/linux/parport.h b/include/linux/parport.h index 106c2ca9440..c22f1254732 100644 --- a/include/linux/parport.h +++ b/include/linux/parport.h @@ -3,96 +3,9 @@ * the GNU Free Documentation License, Version 1.1 or any later version * published by the Free Software Foundation. */ - #ifndef _PARPORT_H_ #define _PARPORT_H_ -/* Start off with user-visible constants */ - -/* Maximum of 16 ports per machine */ -#define PARPORT_MAX 16 - -/* Magic numbers */ -#define PARPORT_IRQ_NONE -1 -#define PARPORT_DMA_NONE -1 -#define PARPORT_IRQ_AUTO -2 -#define PARPORT_DMA_AUTO -2 -#define PARPORT_DMA_NOFIFO -3 -#define PARPORT_DISABLE -2 -#define PARPORT_IRQ_PROBEONLY -3 -#define PARPORT_IOHI_AUTO -1 - -#define PARPORT_CONTROL_STROBE 0x1 -#define PARPORT_CONTROL_AUTOFD 0x2 -#define PARPORT_CONTROL_INIT 0x4 -#define PARPORT_CONTROL_SELECT 0x8 - -#define PARPORT_STATUS_ERROR 0x8 -#define PARPORT_STATUS_SELECT 0x10 -#define PARPORT_STATUS_PAPEROUT 0x20 -#define PARPORT_STATUS_ACK 0x40 -#define PARPORT_STATUS_BUSY 0x80 - -/* Type classes for Plug-and-Play probe. */ -typedef enum { - PARPORT_CLASS_LEGACY = 0, /* Non-IEEE1284 device */ - PARPORT_CLASS_PRINTER, - PARPORT_CLASS_MODEM, - PARPORT_CLASS_NET, - PARPORT_CLASS_HDC, /* Hard disk controller */ - PARPORT_CLASS_PCMCIA, - PARPORT_CLASS_MEDIA, /* Multimedia device */ - PARPORT_CLASS_FDC, /* Floppy disk controller */ - PARPORT_CLASS_PORTS, - PARPORT_CLASS_SCANNER, - PARPORT_CLASS_DIGCAM, - PARPORT_CLASS_OTHER, /* Anything else */ - PARPORT_CLASS_UNSPEC, /* No CLS field in ID */ - PARPORT_CLASS_SCSIADAPTER -} parport_device_class; - -/* The "modes" entry in parport is a bit field representing the - capabilities of the hardware. */ -#define PARPORT_MODE_PCSPP (1<<0) /* IBM PC registers available. */ -#define PARPORT_MODE_TRISTATE (1<<1) /* Can tristate. */ -#define PARPORT_MODE_EPP (1<<2) /* Hardware EPP. */ -#define PARPORT_MODE_ECP (1<<3) /* Hardware ECP. */ -#define PARPORT_MODE_COMPAT (1<<4) /* Hardware 'printer protocol'. */ -#define PARPORT_MODE_DMA (1<<5) /* Hardware can DMA. */ -#define PARPORT_MODE_SAFEININT (1<<6) /* SPP registers accessible in IRQ. */ - -/* IEEE1284 modes: - Nibble mode, byte mode, ECP, ECPRLE and EPP are their own - 'extensibility request' values. Others are special. - 'Real' ECP modes must have the IEEE1284_MODE_ECP bit set. */ -#define IEEE1284_MODE_NIBBLE 0 -#define IEEE1284_MODE_BYTE (1<<0) -#define IEEE1284_MODE_COMPAT (1<<8) -#define IEEE1284_MODE_BECP (1<<9) /* Bounded ECP mode */ -#define IEEE1284_MODE_ECP (1<<4) -#define IEEE1284_MODE_ECPRLE (IEEE1284_MODE_ECP | (1<<5)) -#define IEEE1284_MODE_ECPSWE (1<<10) /* Software-emulated */ -#define IEEE1284_MODE_EPP (1<<6) -#define IEEE1284_MODE_EPPSL (1<<11) /* EPP 1.7 */ -#define IEEE1284_MODE_EPPSWE (1<<12) /* Software-emulated */ -#define IEEE1284_DEVICEID (1<<2) /* This is a flag */ -#define IEEE1284_EXT_LINK (1<<14) /* This flag causes the - * extensibility link to - * be requested, using - * bits 0-6. */ - -/* For the benefit of parport_read/write, you can use these with - * parport_negotiate to use address operations. They have no effect - * other than to make parport_read/write use address transfers. */ -#define IEEE1284_ADDR (1<<13) /* This is a flag */ -#define IEEE1284_DATA 0 /* So is this */ - -/* Flags for block transfer operations. */ -#define PARPORT_EPP_FAST (1<<0) /* Unreliable counts. */ -#define PARPORT_W91284PIC (1<<1) /* have a Warp9 w91284pic in the device */ - -/* The rest is for the kernel only */ -#ifdef __KERNEL__ #include <linux/jiffies.h> #include <linux/proc_fs.h> @@ -101,6 +14,7 @@ typedef enum { #include <linux/irqreturn.h> #include <linux/semaphore.h> #include <asm/ptrace.h> +#include <uapi/linux/parport.h> /* Define this later. */ struct parport; @@ -564,5 +478,4 @@ extern int parport_device_proc_unregister(struct pardevice *device); extern unsigned long parport_default_timeslice; extern int parport_default_spintime; -#endif /* __KERNEL__ */ #endif /* _PARPORT_H_ */ diff --git a/include/linux/patchkey.h b/include/linux/patchkey.h index aefda0ec6e6..97a919fc992 100644 --- a/include/linux/patchkey.h +++ b/include/linux/patchkey.h @@ -9,22 +9,12 @@ * Do not include this file directly. Please use <sys/soundcard.h> instead. * For kernel code, use <linux/soundcard.h> */ - -#ifndef _LINUX_PATCHKEY_H_INDIRECT -#error "patchkey.h included directly" -#endif - #ifndef _LINUX_PATCHKEY_H #define _LINUX_PATCHKEY_H -/* Endian macros. */ -#ifdef __KERNEL__ # include <asm/byteorder.h> -#else -# include <endian.h> -#endif +#include <uapi/linux/patchkey.h> -#if defined(__KERNEL__) # if defined(__BIG_ENDIAN) # define _PATCHKEY(id) (0xfd00|id) # elif defined(__LITTLE_ENDIAN) @@ -32,16 +22,4 @@ # else # error "could not determine byte order" # endif -#else -#if defined(__BYTE_ORDER) -# if __BYTE_ORDER == __BIG_ENDIAN -# define _PATCHKEY(id) (0xfd00|id) -# elif __BYTE_ORDER == __LITTLE_ENDIAN -# define _PATCHKEY(id) ((id<<8)|0x00fd) -# else -# error "could not determine byte order" -# endif -#endif -#endif - #endif /* _LINUX_PATCHKEY_H */ diff --git a/include/linux/pci.h b/include/linux/pci.h index be1de01de1c..ee2179546c6 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -13,32 +13,9 @@ * PCI to PCI Bridge Specification * PCI System Design Guide */ - #ifndef LINUX_PCI_H #define LINUX_PCI_H -#include <linux/pci_regs.h> /* The pci register defines */ - -/* - * The PCI interface treats multi-function devices as independent - * devices. The slot/function address of each device is encoded - * in a single byte as follows: - * - * 7:3 = slot - * 2:0 = function - */ -#define PCI_DEVFN(slot, func) ((((slot) & 0x1f) << 3) | ((func) & 0x07)) -#define PCI_SLOT(devfn) (((devfn) >> 3) & 0x1f) -#define PCI_FUNC(devfn) ((devfn) & 0x07) - -/* Ioctls for /proc/bus/pci/X/Y nodes. */ -#define PCIIOC_BASE ('P' << 24 | 'C' << 16 | 'I' << 8) -#define PCIIOC_CONTROLLER (PCIIOC_BASE | 0x00) /* Get controller for PCI device. */ -#define PCIIOC_MMAP_IS_IO (PCIIOC_BASE | 0x01) /* Set mmap state to I/O space. */ -#define PCIIOC_MMAP_IS_MEM (PCIIOC_BASE | 0x02) /* Set mmap state to MEM space. */ -#define PCIIOC_WRITE_COMBINE (PCIIOC_BASE | 0x03) /* Enable/disable write-combining. */ - -#ifdef __KERNEL__ #include <linux/mod_devicetable.h> @@ -53,6 +30,7 @@ #include <linux/device.h> #include <linux/io.h> #include <linux/irqreturn.h> +#include <uapi/linux/pci.h> /* Include the ID list */ #include <linux/pci_ids.h> @@ -1831,5 +1809,4 @@ static inline struct eeh_dev *pci_dev_to_eeh_dev(struct pci_dev *pdev) */ struct pci_dev *pci_find_upstream_pcie_bridge(struct pci_dev *pdev); -#endif /* __KERNEL__ */ #endif /* LINUX_PCI_H */ diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index 599afc4bb67..2e902359aee 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -14,606 +14,9 @@ #ifndef _LINUX_PERF_EVENT_H #define _LINUX_PERF_EVENT_H -#include <linux/types.h> -#include <linux/ioctl.h> -#include <asm/byteorder.h> +#include <uapi/linux/perf_event.h> /* - * User-space ABI bits: - */ - -/* - * attr.type - */ -enum perf_type_id { - PERF_TYPE_HARDWARE = 0, - PERF_TYPE_SOFTWARE = 1, - PERF_TYPE_TRACEPOINT = 2, - PERF_TYPE_HW_CACHE = 3, - PERF_TYPE_RAW = 4, - PERF_TYPE_BREAKPOINT = 5, - - PERF_TYPE_MAX, /* non-ABI */ -}; - -/* - * Generalized performance event event_id types, used by the - * attr.event_id parameter of the sys_perf_event_open() - * syscall: - */ -enum perf_hw_id { - /* - * Common hardware events, generalized by the kernel: - */ - PERF_COUNT_HW_CPU_CYCLES = 0, - PERF_COUNT_HW_INSTRUCTIONS = 1, - PERF_COUNT_HW_CACHE_REFERENCES = 2, - PERF_COUNT_HW_CACHE_MISSES = 3, - PERF_COUNT_HW_BRANCH_INSTRUCTIONS = 4, - PERF_COUNT_HW_BRANCH_MISSES = 5, - PERF_COUNT_HW_BUS_CYCLES = 6, - PERF_COUNT_HW_STALLED_CYCLES_FRONTEND = 7, - PERF_COUNT_HW_STALLED_CYCLES_BACKEND = 8, - PERF_COUNT_HW_REF_CPU_CYCLES = 9, - - PERF_COUNT_HW_MAX, /* non-ABI */ -}; - -/* - * Generalized hardware cache events: - * - * { L1-D, L1-I, LLC, ITLB, DTLB, BPU, NODE } x - * { read, write, prefetch } x - * { accesses, misses } - */ -enum perf_hw_cache_id { - PERF_COUNT_HW_CACHE_L1D = 0, - PERF_COUNT_HW_CACHE_L1I = 1, - PERF_COUNT_HW_CACHE_LL = 2, - PERF_COUNT_HW_CACHE_DTLB = 3, - PERF_COUNT_HW_CACHE_ITLB = 4, - PERF_COUNT_HW_CACHE_BPU = 5, - PERF_COUNT_HW_CACHE_NODE = 6, - - PERF_COUNT_HW_CACHE_MAX, /* non-ABI */ -}; - -enum perf_hw_cache_op_id { - PERF_COUNT_HW_CACHE_OP_READ = 0, - PERF_COUNT_HW_CACHE_OP_WRITE = 1, - PERF_COUNT_HW_CACHE_OP_PREFETCH = 2, - - PERF_COUNT_HW_CACHE_OP_MAX, /* non-ABI */ -}; - -enum perf_hw_cache_op_result_id { - PERF_COUNT_HW_CACHE_RESULT_ACCESS = 0, - PERF_COUNT_HW_CACHE_RESULT_MISS = 1, - - PERF_COUNT_HW_CACHE_RESULT_MAX, /* non-ABI */ -}; - -/* - * Special "software" events provided by the kernel, even if the hardware - * does not support performance events. These events measure various - * physical and sw events of the kernel (and allow the profiling of them as - * well): - */ -enum perf_sw_ids { - PERF_COUNT_SW_CPU_CLOCK = 0, - PERF_COUNT_SW_TASK_CLOCK = 1, - PERF_COUNT_SW_PAGE_FAULTS = 2, - PERF_COUNT_SW_CONTEXT_SWITCHES = 3, - PERF_COUNT_SW_CPU_MIGRATIONS = 4, - PERF_COUNT_SW_PAGE_FAULTS_MIN = 5, - PERF_COUNT_SW_PAGE_FAULTS_MAJ = 6, - PERF_COUNT_SW_ALIGNMENT_FAULTS = 7, - PERF_COUNT_SW_EMULATION_FAULTS = 8, - - PERF_COUNT_SW_MAX, /* non-ABI */ -}; - -/* - * Bits that can be set in attr.sample_type to request information - * in the overflow packets. - */ -enum perf_event_sample_format { - PERF_SAMPLE_IP = 1U << 0, - PERF_SAMPLE_TID = 1U << 1, - PERF_SAMPLE_TIME = 1U << 2, - PERF_SAMPLE_ADDR = 1U << 3, - PERF_SAMPLE_READ = 1U << 4, - PERF_SAMPLE_CALLCHAIN = 1U << 5, - PERF_SAMPLE_ID = 1U << 6, - PERF_SAMPLE_CPU = 1U << 7, - PERF_SAMPLE_PERIOD = 1U << 8, - PERF_SAMPLE_STREAM_ID = 1U << 9, - PERF_SAMPLE_RAW = 1U << 10, - PERF_SAMPLE_BRANCH_STACK = 1U << 11, - PERF_SAMPLE_REGS_USER = 1U << 12, - PERF_SAMPLE_STACK_USER = 1U << 13, - - PERF_SAMPLE_MAX = 1U << 14, /* non-ABI */ -}; - -/* - * values to program into branch_sample_type when PERF_SAMPLE_BRANCH is set - * - * If the user does not pass priv level information via branch_sample_type, - * the kernel uses the event's priv level. Branch and event priv levels do - * not have to match. Branch priv level is checked for permissions. - * - * The branch types can be combined, however BRANCH_ANY covers all types - * of branches and therefore it supersedes all the other types. - */ -enum perf_branch_sample_type { - PERF_SAMPLE_BRANCH_USER = 1U << 0, /* user branches */ - PERF_SAMPLE_BRANCH_KERNEL = 1U << 1, /* kernel branches */ - PERF_SAMPLE_BRANCH_HV = 1U << 2, /* hypervisor branches */ - - PERF_SAMPLE_BRANCH_ANY = 1U << 3, /* any branch types */ - PERF_SAMPLE_BRANCH_ANY_CALL = 1U << 4, /* any call branch */ - PERF_SAMPLE_BRANCH_ANY_RETURN = 1U << 5, /* any return branch */ - PERF_SAMPLE_BRANCH_IND_CALL = 1U << 6, /* indirect calls */ - - PERF_SAMPLE_BRANCH_MAX = 1U << 7, /* non-ABI */ -}; - -#define PERF_SAMPLE_BRANCH_PLM_ALL \ - (PERF_SAMPLE_BRANCH_USER|\ - PERF_SAMPLE_BRANCH_KERNEL|\ - PERF_SAMPLE_BRANCH_HV) - -/* - * Values to determine ABI of the registers dump. - */ -enum perf_sample_regs_abi { - PERF_SAMPLE_REGS_ABI_NONE = 0, - PERF_SAMPLE_REGS_ABI_32 = 1, - PERF_SAMPLE_REGS_ABI_64 = 2, -}; - -/* - * The format of the data returned by read() on a perf event fd, - * as specified by attr.read_format: - * - * struct read_format { - * { u64 value; - * { u64 time_enabled; } && PERF_FORMAT_TOTAL_TIME_ENABLED - * { u64 time_running; } && PERF_FORMAT_TOTAL_TIME_RUNNING - * { u64 id; } && PERF_FORMAT_ID - * } && !PERF_FORMAT_GROUP - * - * { u64 nr; - * { u64 time_enabled; } && PERF_FORMAT_TOTAL_TIME_ENABLED - * { u64 time_running; } && PERF_FORMAT_TOTAL_TIME_RUNNING - * { u64 value; - * { u64 id; } && PERF_FORMAT_ID - * } cntr[nr]; - * } && PERF_FORMAT_GROUP - * }; - */ -enum perf_event_read_format { - PERF_FORMAT_TOTAL_TIME_ENABLED = 1U << 0, - PERF_FORMAT_TOTAL_TIME_RUNNING = 1U << 1, - PERF_FORMAT_ID = 1U << 2, - PERF_FORMAT_GROUP = 1U << 3, - - PERF_FORMAT_MAX = 1U << 4, /* non-ABI */ -}; - -#define PERF_ATTR_SIZE_VER0 64 /* sizeof first published struct */ -#define PERF_ATTR_SIZE_VER1 72 /* add: config2 */ -#define PERF_ATTR_SIZE_VER2 80 /* add: branch_sample_type */ -#define PERF_ATTR_SIZE_VER3 96 /* add: sample_regs_user */ - /* add: sample_stack_user */ - -/* - * Hardware event_id to monitor via a performance monitoring event: - */ -struct perf_event_attr { - - /* - * Major type: hardware/software/tracepoint/etc. - */ - __u32 type; - - /* - * Size of the attr structure, for fwd/bwd compat. - */ - __u32 size; - - /* - * Type specific configuration information. - */ - __u64 config; - - union { - __u64 sample_period; - __u64 sample_freq; - }; - - __u64 sample_type; - __u64 read_format; - - __u64 disabled : 1, /* off by default */ - inherit : 1, /* children inherit it */ - pinned : 1, /* must always be on PMU */ - exclusive : 1, /* only group on PMU */ - exclude_user : 1, /* don't count user */ - exclude_kernel : 1, /* ditto kernel */ - exclude_hv : 1, /* ditto hypervisor */ - exclude_idle : 1, /* don't count when idle */ - mmap : 1, /* include mmap data */ - comm : 1, /* include comm data */ - freq : 1, /* use freq, not period */ - inherit_stat : 1, /* per task counts */ - enable_on_exec : 1, /* next exec enables */ - task : 1, /* trace fork/exit */ - watermark : 1, /* wakeup_watermark */ - /* - * precise_ip: - * - * 0 - SAMPLE_IP can have arbitrary skid - * 1 - SAMPLE_IP must have constant skid - * 2 - SAMPLE_IP requested to have 0 skid - * 3 - SAMPLE_IP must have 0 skid - * - * See also PERF_RECORD_MISC_EXACT_IP - */ - precise_ip : 2, /* skid constraint */ - mmap_data : 1, /* non-exec mmap data */ - sample_id_all : 1, /* sample_type all events */ - - exclude_host : 1, /* don't count in host */ - exclude_guest : 1, /* don't count in guest */ - - exclude_callchain_kernel : 1, /* exclude kernel callchains */ - exclude_callchain_user : 1, /* exclude user callchains */ - - __reserved_1 : 41; - - union { - __u32 wakeup_events; /* wakeup every n events */ - __u32 wakeup_watermark; /* bytes before wakeup */ - }; - - __u32 bp_type; - union { - __u64 bp_addr; - __u64 config1; /* extension of config */ - }; - union { - __u64 bp_len; - __u64 config2; /* extension of config1 */ - }; - __u64 branch_sample_type; /* enum perf_branch_sample_type */ - - /* - * Defines set of user regs to dump on samples. - * See asm/perf_regs.h for details. - */ - __u64 sample_regs_user; - - /* - * Defines size of the user stack to dump on samples. - */ - __u32 sample_stack_user; - - /* Align to u64. */ - __u32 __reserved_2; -}; - -#define perf_flags(attr) (*(&(attr)->read_format + 1)) - -/* - * Ioctls that can be done on a perf event fd: - */ -#define PERF_EVENT_IOC_ENABLE _IO ('$', 0) -#define PERF_EVENT_IOC_DISABLE _IO ('$', 1) -#define PERF_EVENT_IOC_REFRESH _IO ('$', 2) -#define PERF_EVENT_IOC_RESET _IO ('$', 3) -#define PERF_EVENT_IOC_PERIOD _IOW('$', 4, __u64) -#define PERF_EVENT_IOC_SET_OUTPUT _IO ('$', 5) -#define PERF_EVENT_IOC_SET_FILTER _IOW('$', 6, char *) - -enum perf_event_ioc_flags { - PERF_IOC_FLAG_GROUP = 1U << 0, -}; - -/* - * Structure of the page that can be mapped via mmap - */ -struct perf_event_mmap_page { - __u32 version; /* version number of this structure */ - __u32 compat_version; /* lowest version this is compat with */ - - /* - * Bits needed to read the hw events in user-space. - * - * u32 seq, time_mult, time_shift, idx, width; - * u64 count, enabled, running; - * u64 cyc, time_offset; - * s64 pmc = 0; - * - * do { - * seq = pc->lock; - * barrier() - * - * enabled = pc->time_enabled; - * running = pc->time_running; - * - * if (pc->cap_usr_time && enabled != running) { - * cyc = rdtsc(); - * time_offset = pc->time_offset; - * time_mult = pc->time_mult; - * time_shift = pc->time_shift; - * } - * - * idx = pc->index; - * count = pc->offset; - * if (pc->cap_usr_rdpmc && idx) { - * width = pc->pmc_width; - * pmc = rdpmc(idx - 1); - * } - * - * barrier(); - * } while (pc->lock != seq); - * - * NOTE: for obvious reason this only works on self-monitoring - * processes. - */ - __u32 lock; /* seqlock for synchronization */ - __u32 index; /* hardware event identifier */ - __s64 offset; /* add to hardware event value */ - __u64 time_enabled; /* time event active */ - __u64 time_running; /* time event on cpu */ - union { - __u64 capabilities; - __u64 cap_usr_time : 1, - cap_usr_rdpmc : 1, - cap_____res : 62; - }; - - /* - * If cap_usr_rdpmc this field provides the bit-width of the value - * read using the rdpmc() or equivalent instruction. This can be used - * to sign extend the result like: - * - * pmc <<= 64 - width; - * pmc >>= 64 - width; // signed shift right - * count += pmc; - */ - __u16 pmc_width; - - /* - * If cap_usr_time the below fields can be used to compute the time - * delta since time_enabled (in ns) using rdtsc or similar. - * - * u64 quot, rem; - * u64 delta; - * - * quot = (cyc >> time_shift); - * rem = cyc & ((1 << time_shift) - 1); - * delta = time_offset + quot * time_mult + - * ((rem * time_mult) >> time_shift); - * - * Where time_offset,time_mult,time_shift and cyc are read in the - * seqcount loop described above. This delta can then be added to - * enabled and possible running (if idx), improving the scaling: - * - * enabled += delta; - * if (idx) - * running += delta; - * - * quot = count / running; - * rem = count % running; - * count = quot * enabled + (rem * enabled) / running; - */ - __u16 time_shift; - __u32 time_mult; - __u64 time_offset; - - /* - * Hole for extension of the self monitor capabilities - */ - - __u64 __reserved[120]; /* align to 1k */ - - /* - * Control data for the mmap() data buffer. - * - * User-space reading the @data_head value should issue an rmb(), on - * SMP capable platforms, after reading this value -- see - * perf_event_wakeup(). - * - * When the mapping is PROT_WRITE the @data_tail value should be - * written by userspace to reflect the last read data. In this case - * the kernel will not over-write unread data. - */ - __u64 data_head; /* head in the data section */ - __u64 data_tail; /* user-space written tail */ -}; - -#define PERF_RECORD_MISC_CPUMODE_MASK (7 << 0) -#define PERF_RECORD_MISC_CPUMODE_UNKNOWN (0 << 0) -#define PERF_RECORD_MISC_KERNEL (1 << 0) -#define PERF_RECORD_MISC_USER (2 << 0) -#define PERF_RECORD_MISC_HYPERVISOR (3 << 0) -#define PERF_RECORD_MISC_GUEST_KERNEL (4 << 0) -#define PERF_RECORD_MISC_GUEST_USER (5 << 0) - -/* - * Indicates that the content of PERF_SAMPLE_IP points to - * the actual instruction that triggered the event. See also - * perf_event_attr::precise_ip. - */ -#define PERF_RECORD_MISC_EXACT_IP (1 << 14) -/* - * Reserve the last bit to indicate some extended misc field - */ -#define PERF_RECORD_MISC_EXT_RESERVED (1 << 15) - -struct perf_event_header { - __u32 type; - __u16 misc; - __u16 size; -}; - -enum perf_event_type { - - /* - * If perf_event_attr.sample_id_all is set then all event types will - * have the sample_type selected fields related to where/when - * (identity) an event took place (TID, TIME, ID, CPU, STREAM_ID) - * described in PERF_RECORD_SAMPLE below, it will be stashed just after - * the perf_event_header and the fields already present for the existing - * fields, i.e. at the end of the payload. That way a newer perf.data - * file will be supported by older perf tools, with these new optional - * fields being ignored. - * - * The MMAP events record the PROT_EXEC mappings so that we can - * correlate userspace IPs to code. They have the following structure: - * - * struct { - * struct perf_event_header header; - * - * u32 pid, tid; - * u64 addr; - * u64 len; - * u64 pgoff; - * char filename[]; - * }; - */ - PERF_RECORD_MMAP = 1, - - /* - * struct { - * struct perf_event_header header; - * u64 id; - * u64 lost; - * }; - */ - PERF_RECORD_LOST = 2, - - /* - * struct { - * struct perf_event_header header; - * - * u32 pid, tid; - * char comm[]; - * }; - */ - PERF_RECORD_COMM = 3, - - /* - * struct { - * struct perf_event_header header; - * u32 pid, ppid; - * u32 tid, ptid; - * u64 time; - * }; - */ - PERF_RECORD_EXIT = 4, - - /* - * struct { - * struct perf_event_header header; - * u64 time; - * u64 id; - * u64 stream_id; - * }; - */ - PERF_RECORD_THROTTLE = 5, - PERF_RECORD_UNTHROTTLE = 6, - - /* - * struct { - * struct perf_event_header header; - * u32 pid, ppid; - * u32 tid, ptid; - * u64 time; - * }; - */ - PERF_RECORD_FORK = 7, - - /* - * struct { - * struct perf_event_header header; - * u32 pid, tid; - * - * struct read_format values; - * }; - */ - PERF_RECORD_READ = 8, - - /* - * struct { - * struct perf_event_header header; - * - * { u64 ip; } && PERF_SAMPLE_IP - * { u32 pid, tid; } && PERF_SAMPLE_TID - * { u64 time; } && PERF_SAMPLE_TIME - * { u64 addr; } && PERF_SAMPLE_ADDR - * { u64 id; } && PERF_SAMPLE_ID - * { u64 stream_id;} && PERF_SAMPLE_STREAM_ID - * { u32 cpu, res; } && PERF_SAMPLE_CPU - * { u64 period; } && PERF_SAMPLE_PERIOD - * - * { struct read_format values; } && PERF_SAMPLE_READ - * - * { u64 nr, - * u64 ips[nr]; } && PERF_SAMPLE_CALLCHAIN - * - * # - * # The RAW record below is opaque data wrt the ABI - * # - * # That is, the ABI doesn't make any promises wrt to - * # the stability of its content, it may vary depending - * # on event, hardware, kernel version and phase of - * # the moon. - * # - * # In other words, PERF_SAMPLE_RAW contents are not an ABI. - * # - * - * { u32 size; - * char data[size];}&& PERF_SAMPLE_RAW - * - * { u64 from, to, flags } lbr[nr];} && PERF_SAMPLE_BRANCH_STACK - * - * { u64 abi; # enum perf_sample_regs_abi - * u64 regs[weight(mask)]; } && PERF_SAMPLE_REGS_USER - * - * { u64 size; - * char data[size]; - * u64 dyn_size; } && PERF_SAMPLE_STACK_USER - * }; - */ - PERF_RECORD_SAMPLE = 9, - - PERF_RECORD_MAX, /* non-ABI */ -}; - -#define PERF_MAX_STACK_DEPTH 127 - -enum perf_callchain_context { - PERF_CONTEXT_HV = (__u64)-32, - PERF_CONTEXT_KERNEL = (__u64)-128, - PERF_CONTEXT_USER = (__u64)-512, - - PERF_CONTEXT_GUEST = (__u64)-2048, - PERF_CONTEXT_GUEST_KERNEL = (__u64)-2176, - PERF_CONTEXT_GUEST_USER = (__u64)-2560, - - PERF_CONTEXT_MAX = (__u64)-4095, -}; - -#define PERF_FLAG_FD_NO_GROUP (1U << 0) -#define PERF_FLAG_FD_OUTPUT (1U << 1) -#define PERF_FLAG_PID_CGROUP (1U << 2) /* pid=cgroup id, per-cpu mode only */ - -#ifdef __KERNEL__ -/* * Kernel-internal data types and definitions: */ @@ -1110,7 +513,7 @@ struct perf_cpu_context { int exclusive; struct list_head rotation_list; int jiffies_interval; - struct pmu *active_pmu; + struct pmu *unique_pmu; struct perf_cgroup *cgrp; }; @@ -1422,5 +825,4 @@ _name##_show(struct device *dev, \ \ static struct device_attribute format_attr_##_name = __ATTR_RO(_name) -#endif /* __KERNEL__ */ #endif /* _LINUX_PERF_EVENT_H */ diff --git a/include/linux/personality.h b/include/linux/personality.h index 8fc7dd1a57f..646c0a7d50f 100644 --- a/include/linux/personality.h +++ b/include/linux/personality.h @@ -1,7 +1,8 @@ #ifndef _LINUX_PERSONALITY_H #define _LINUX_PERSONALITY_H -#ifdef __KERNEL__ +#include <uapi/linux/personality.h> + /* * Handling of different ABIs (personalities). @@ -14,72 +15,6 @@ extern int register_exec_domain(struct exec_domain *); extern int unregister_exec_domain(struct exec_domain *); extern int __set_personality(unsigned int); -#endif /* __KERNEL__ */ - -/* - * Flags for bug emulation. - * - * These occupy the top three bytes. - */ -enum { - UNAME26 = 0x0020000, - ADDR_NO_RANDOMIZE = 0x0040000, /* disable randomization of VA space */ - FDPIC_FUNCPTRS = 0x0080000, /* userspace function ptrs point to descriptors - * (signal handling) - */ - MMAP_PAGE_ZERO = 0x0100000, - ADDR_COMPAT_LAYOUT = 0x0200000, - READ_IMPLIES_EXEC = 0x0400000, - ADDR_LIMIT_32BIT = 0x0800000, - SHORT_INODE = 0x1000000, - WHOLE_SECONDS = 0x2000000, - STICKY_TIMEOUTS = 0x4000000, - ADDR_LIMIT_3GB = 0x8000000, -}; - -/* - * Security-relevant compatibility flags that must be - * cleared upon setuid or setgid exec: - */ -#define PER_CLEAR_ON_SETID (READ_IMPLIES_EXEC | \ - ADDR_NO_RANDOMIZE | \ - ADDR_COMPAT_LAYOUT | \ - MMAP_PAGE_ZERO) - -/* - * Personality types. - * - * These go in the low byte. Avoid using the top bit, it will - * conflict with error returns. - */ -enum { - PER_LINUX = 0x0000, - PER_LINUX_32BIT = 0x0000 | ADDR_LIMIT_32BIT, - PER_LINUX_FDPIC = 0x0000 | FDPIC_FUNCPTRS, - PER_SVR4 = 0x0001 | STICKY_TIMEOUTS | MMAP_PAGE_ZERO, - PER_SVR3 = 0x0002 | STICKY_TIMEOUTS | SHORT_INODE, - PER_SCOSVR3 = 0x0003 | STICKY_TIMEOUTS | - WHOLE_SECONDS | SHORT_INODE, - PER_OSR5 = 0x0003 | STICKY_TIMEOUTS | WHOLE_SECONDS, - PER_WYSEV386 = 0x0004 | STICKY_TIMEOUTS | SHORT_INODE, - PER_ISCR4 = 0x0005 | STICKY_TIMEOUTS, - PER_BSD = 0x0006, - PER_SUNOS = 0x0006 | STICKY_TIMEOUTS, - PER_XENIX = 0x0007 | STICKY_TIMEOUTS | SHORT_INODE, - PER_LINUX32 = 0x0008, - PER_LINUX32_3GB = 0x0008 | ADDR_LIMIT_3GB, - PER_IRIX32 = 0x0009 | STICKY_TIMEOUTS,/* IRIX5 32-bit */ - PER_IRIXN32 = 0x000a | STICKY_TIMEOUTS,/* IRIX6 new 32-bit */ - PER_IRIX64 = 0x000b | STICKY_TIMEOUTS,/* IRIX6 64-bit */ - PER_RISCOS = 0x000c, - PER_SOLARIS = 0x000d | STICKY_TIMEOUTS, - PER_UW7 = 0x000e | STICKY_TIMEOUTS | MMAP_PAGE_ZERO, - PER_OSF4 = 0x000f, /* OSF/1 v4 */ - PER_HPUX = 0x0010, - PER_MASK = 0x00ff, -}; - -#ifdef __KERNEL__ /* * Description of an execution domain. @@ -116,6 +51,4 @@ struct exec_domain { #define set_personality(pers) \ ((current->personality == (pers)) ? 0 : __set_personality(pers)) -#endif /* __KERNEL__ */ - #endif /* _LINUX_PERSONALITY_H */ diff --git a/include/linux/phonet.h b/include/linux/phonet.h index f48bfc80cb4..f691b04fc5c 100644 --- a/include/linux/phonet.h +++ b/include/linux/phonet.h @@ -19,169 +19,11 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA * 02110-1301 USA */ - #ifndef LINUX_PHONET_H #define LINUX_PHONET_H -#include <linux/types.h> -#include <linux/socket.h> - -/* Automatic protocol selection */ -#define PN_PROTO_TRANSPORT 0 -/* Phonet datagram socket */ -#define PN_PROTO_PHONET 1 -/* Phonet pipe */ -#define PN_PROTO_PIPE 2 -#define PHONET_NPROTO 3 - -/* Socket options for SOL_PNPIPE level */ -#define PNPIPE_ENCAP 1 -#define PNPIPE_IFINDEX 2 -#define PNPIPE_HANDLE 3 -#define PNPIPE_INITSTATE 4 - -#define PNADDR_ANY 0 -#define PNADDR_BROADCAST 0xFC -#define PNPORT_RESOURCE_ROUTING 0 - -/* Values for PNPIPE_ENCAP option */ -#define PNPIPE_ENCAP_NONE 0 -#define PNPIPE_ENCAP_IP 1 - -/* ioctls */ -#define SIOCPNGETOBJECT (SIOCPROTOPRIVATE + 0) -#define SIOCPNENABLEPIPE (SIOCPROTOPRIVATE + 13) -#define SIOCPNADDRESOURCE (SIOCPROTOPRIVATE + 14) -#define SIOCPNDELRESOURCE (SIOCPROTOPRIVATE + 15) - -/* Phonet protocol header */ -struct phonethdr { - __u8 pn_rdev; - __u8 pn_sdev; - __u8 pn_res; - __be16 pn_length; - __u8 pn_robj; - __u8 pn_sobj; -} __attribute__((packed)); - -/* Common Phonet payload header */ -struct phonetmsg { - __u8 pn_trans_id; /* transaction ID */ - __u8 pn_msg_id; /* message type */ - union { - struct { - __u8 pn_submsg_id; /* message subtype */ - __u8 pn_data[5]; - } base; - struct { - __u16 pn_e_res_id; /* extended resource ID */ - __u8 pn_e_submsg_id; /* message subtype */ - __u8 pn_e_data[3]; - } ext; - } pn_msg_u; -}; -#define PN_COMMON_MESSAGE 0xF0 -#define PN_COMMGR 0x10 -#define PN_PREFIX 0xE0 /* resource for extended messages */ -#define pn_submsg_id pn_msg_u.base.pn_submsg_id -#define pn_e_submsg_id pn_msg_u.ext.pn_e_submsg_id -#define pn_e_res_id pn_msg_u.ext.pn_e_res_id -#define pn_data pn_msg_u.base.pn_data -#define pn_e_data pn_msg_u.ext.pn_e_data - -/* data for unreachable errors */ -#define PN_COMM_SERVICE_NOT_IDENTIFIED_RESP 0x01 -#define PN_COMM_ISA_ENTITY_NOT_REACHABLE_RESP 0x14 -#define pn_orig_msg_id pn_data[0] -#define pn_status pn_data[1] -#define pn_e_orig_msg_id pn_e_data[0] -#define pn_e_status pn_e_data[1] - -/* Phonet socket address structure */ -struct sockaddr_pn { - __kernel_sa_family_t spn_family; - __u8 spn_obj; - __u8 spn_dev; - __u8 spn_resource; - __u8 spn_zero[sizeof(struct sockaddr) - sizeof(__kernel_sa_family_t) - 3]; -} __attribute__((packed)); - -/* Well known address */ -#define PN_DEV_PC 0x10 - -static inline __u16 pn_object(__u8 addr, __u16 port) -{ - return (addr << 8) | (port & 0x3ff); -} +#include <uapi/linux/phonet.h> -static inline __u8 pn_obj(__u16 handle) -{ - return handle & 0xff; -} - -static inline __u8 pn_dev(__u16 handle) -{ - return handle >> 8; -} - -static inline __u16 pn_port(__u16 handle) -{ - return handle & 0x3ff; -} - -static inline __u8 pn_addr(__u16 handle) -{ - return (handle >> 8) & 0xfc; -} - -static inline void pn_sockaddr_set_addr(struct sockaddr_pn *spn, __u8 addr) -{ - spn->spn_dev &= 0x03; - spn->spn_dev |= addr & 0xfc; -} - -static inline void pn_sockaddr_set_port(struct sockaddr_pn *spn, __u16 port) -{ - spn->spn_dev &= 0xfc; - spn->spn_dev |= (port >> 8) & 0x03; - spn->spn_obj = port & 0xff; -} - -static inline void pn_sockaddr_set_object(struct sockaddr_pn *spn, - __u16 handle) -{ - spn->spn_dev = pn_dev(handle); - spn->spn_obj = pn_obj(handle); -} - -static inline void pn_sockaddr_set_resource(struct sockaddr_pn *spn, - __u8 resource) -{ - spn->spn_resource = resource; -} - -static inline __u8 pn_sockaddr_get_addr(const struct sockaddr_pn *spn) -{ - return spn->spn_dev & 0xfc; -} - -static inline __u16 pn_sockaddr_get_port(const struct sockaddr_pn *spn) -{ - return ((spn->spn_dev & 0x03) << 8) | spn->spn_obj; -} - -static inline __u16 pn_sockaddr_get_object(const struct sockaddr_pn *spn) -{ - return pn_object(spn->spn_dev, spn->spn_obj); -} - -static inline __u8 pn_sockaddr_get_resource(const struct sockaddr_pn *spn) -{ - return spn->spn_resource; -} - -/* Phonet device ioctl requests */ -#ifdef __KERNEL__ #define SIOCPNGAUTOCONF (SIOCDEVPRIVATE + 0) struct if_phonet_autoconf { @@ -195,6 +37,4 @@ struct if_phonet_req { } ifr_ifru; }; #define ifr_phonet_autoconf ifr_ifru.ifru_phonet_autoconf -#endif /* __KERNEL__ */ - #endif diff --git a/include/linux/pktcdvd.h b/include/linux/pktcdvd.h index 721301b0a90..93d142ad152 100644 --- a/include/linux/pktcdvd.h +++ b/include/linux/pktcdvd.h @@ -12,108 +12,13 @@ #ifndef __PKTCDVD_H #define __PKTCDVD_H -#include <linux/types.h> - -/* - * 1 for normal debug messages, 2 is very verbose. 0 to turn it off. - */ -#define PACKET_DEBUG 1 - -#define MAX_WRITERS 8 - -#define PKT_RB_POOL_SIZE 512 - -/* - * How long we should hold a non-full packet before starting data gathering. - */ -#define PACKET_WAIT_TIME (HZ * 5 / 1000) - -/* - * use drive write caching -- we need deferred error handling to be - * able to successfully recover with this option (drive will return good - * status as soon as the cdb is validated). - */ -#if defined(CONFIG_CDROM_PKTCDVD_WCACHE) -#define USE_WCACHING 1 -#else -#define USE_WCACHING 0 -#endif - -/* - * No user-servicable parts beyond this point -> - */ - -/* - * device types - */ -#define PACKET_CDR 1 -#define PACKET_CDRW 2 -#define PACKET_DVDR 3 -#define PACKET_DVDRW 4 - -/* - * flags - */ -#define PACKET_WRITABLE 1 /* pd is writable */ -#define PACKET_NWA_VALID 2 /* next writable address valid */ -#define PACKET_LRA_VALID 3 /* last recorded address valid */ -#define PACKET_MERGE_SEGS 4 /* perform segment merging to keep */ - /* underlying cdrom device happy */ - -/* - * Disc status -- from READ_DISC_INFO - */ -#define PACKET_DISC_EMPTY 0 -#define PACKET_DISC_INCOMPLETE 1 -#define PACKET_DISC_COMPLETE 2 -#define PACKET_DISC_OTHER 3 - -/* - * write type, and corresponding data block type - */ -#define PACKET_MODE1 1 -#define PACKET_MODE2 2 -#define PACKET_BLOCK_MODE1 8 -#define PACKET_BLOCK_MODE2 10 - -/* - * Last session/border status - */ -#define PACKET_SESSION_EMPTY 0 -#define PACKET_SESSION_INCOMPLETE 1 -#define PACKET_SESSION_RESERVED 2 -#define PACKET_SESSION_COMPLETE 3 - -#define PACKET_MCN "4a656e734178626f65323030300000" - -#undef PACKET_USE_LS - -#define PKT_CTRL_CMD_SETUP 0 -#define PKT_CTRL_CMD_TEARDOWN 1 -#define PKT_CTRL_CMD_STATUS 2 - -struct pkt_ctrl_command { - __u32 command; /* in: Setup, teardown, status */ - __u32 dev_index; /* in/out: Device index */ - __u32 dev; /* in/out: Device nr for cdrw device */ - __u32 pkt_dev; /* in/out: Device nr for packet device */ - __u32 num_devices; /* out: Largest device index + 1 */ - __u32 padding; /* Not used */ -}; - -/* - * packet ioctls - */ -#define PACKET_IOCTL_MAGIC ('X') -#define PACKET_CTRL_CMD _IOWR(PACKET_IOCTL_MAGIC, 1, struct pkt_ctrl_command) - -#ifdef __KERNEL__ #include <linux/blkdev.h> #include <linux/completion.h> #include <linux/cdrom.h> #include <linux/kobject.h> #include <linux/sysfs.h> #include <linux/mempool.h> +#include <uapi/linux/pktcdvd.h> /* default bio write queue congestion marks */ #define PKT_WRITE_CONGESTION_ON 10000 @@ -297,6 +202,4 @@ struct pktcdvd_device struct dentry *dfs_f_info; /* debugfs: info file */ }; -#endif /* __KERNEL__ */ - #endif /* __PKTCDVD_H */ diff --git a/include/linux/platform_data/exynos4_tmu.h b/include/linux/platform_data/exynos_thermal.h index 39e038cca59..a7bdb2f63b7 100644 --- a/include/linux/platform_data/exynos4_tmu.h +++ b/include/linux/platform_data/exynos_thermal.h @@ -1,5 +1,5 @@ /* - * exynos4_tmu.h - Samsung EXYNOS4 TMU (Thermal Management Unit) + * exynos_thermal.h - Samsung EXYNOS TMU (Thermal Management Unit) * * Copyright (C) 2011 Samsung Electronics * Donggeun Kim <dg77.kim@samsung.com> @@ -19,8 +19,9 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#ifndef _LINUX_EXYNOS4_TMU_H -#define _LINUX_EXYNOS4_TMU_H +#ifndef _LINUX_EXYNOS_THERMAL_H +#define _LINUX_EXYNOS_THERMAL_H +#include <linux/cpu_cooling.h> enum calibration_type { TYPE_ONE_POINT_TRIMMING, @@ -28,8 +29,28 @@ enum calibration_type { TYPE_NONE, }; +enum soc_type { + SOC_ARCH_EXYNOS4210 = 1, + SOC_ARCH_EXYNOS, +}; +/** + * struct freq_clip_table + * @freq_clip_max: maximum frequency allowed for this cooling state. + * @temp_level: Temperature level at which the temperature clipping will + * happen. + * @mask_val: cpumask of the allowed cpu's where the clipping will take place. + * + * This structure is required to be filled and passed to the + * cpufreq_cooling_unregister function. + */ +struct freq_clip_table { + unsigned int freq_clip_max; + unsigned int temp_level; + const struct cpumask *mask_val; +}; + /** - * struct exynos4_tmu_platform_data + * struct exynos_tmu_platform_data * @threshold: basic temperature for generating interrupt * 25 <= threshold <= 125 [unit: degree Celsius] * @trigger_levels: array for each interrupt levels @@ -63,11 +84,18 @@ enum calibration_type { * @reference_voltage: reference voltage of amplifier * in the positive-TC generator block * 0 <= reference_voltage <= 31 + * @noise_cancel_mode: noise cancellation mode + * 000, 100, 101, 110 and 111 can be different modes + * @type: determines the type of SOC + * @efuse_value: platform defined fuse value * @cal_type: calibration type for temperature + * @freq_clip_table: Table representing frequency reduction percentage. + * @freq_tab_count: Count of the above table as frequency reduction may + * applicable to only some of the trigger levels. * - * This structure is required for configuration of exynos4_tmu driver. + * This structure is required for configuration of exynos_tmu driver. */ -struct exynos4_tmu_platform_data { +struct exynos_tmu_platform_data { u8 threshold; u8 trigger_levels[4]; bool trigger_level0_en; @@ -77,7 +105,12 @@ struct exynos4_tmu_platform_data { u8 gain; u8 reference_voltage; + u8 noise_cancel_mode; + u32 efuse_value; enum calibration_type cal_type; + enum soc_type type; + struct freq_clip_table freq_tab[4]; + unsigned int freq_tab_count; }; -#endif /* _LINUX_EXYNOS4_TMU_H */ +#endif /* _LINUX_EXYNOS_THERMAL_H */ diff --git a/include/linux/platform_data/mipi-csis.h b/include/linux/platform_data/mipi-csis.h index c45b1e8d4c2..bf34e17cee7 100644 --- a/include/linux/platform_data/mipi-csis.h +++ b/include/linux/platform_data/mipi-csis.h @@ -1,7 +1,7 @@ /* - * Copyright (C) 2010-2011 Samsung Electronics Co., Ltd. + * Copyright (C) 2010 - 2012 Samsung Electronics Co., Ltd. * - * S5P series MIPI CSI slave device support + * Samsung S5P/Exynos SoC series MIPI CSIS device support * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -11,33 +11,27 @@ #ifndef __PLAT_SAMSUNG_MIPI_CSIS_H_ #define __PLAT_SAMSUNG_MIPI_CSIS_H_ __FILE__ -struct platform_device; - /** * struct s5p_platform_mipi_csis - platform data for S5P MIPI-CSIS driver - * @clk_rate: bus clock frequency - * @lanes: number of data lanes used - * @alignment: data alignment in bits - * @hs_settle: HS-RX settle time - * @fixed_phy_vdd: false to enable external D-PHY regulator management in the - * driver or true in case this regulator has no enable function - * @phy_enable: pointer to a callback controlling D-PHY enable/reset + * @clk_rate: bus clock frequency + * @wclk_source: CSI wrapper clock selection: 0 - bus clock, 1 - ext. SCLK_CAM + * @lanes: number of data lanes used + * @hs_settle: HS-RX settle time */ struct s5p_platform_mipi_csis { unsigned long clk_rate; + u8 wclk_source; u8 lanes; - u8 alignment; u8 hs_settle; - bool fixed_phy_vdd; - int (*phy_enable)(struct platform_device *pdev, bool on); }; /** * s5p_csis_phy_enable - global MIPI-CSI receiver D-PHY control - * @pdev: MIPI-CSIS platform device - * @on: true to enable D-PHY and deassert its reset - * false to disable D-PHY + * @id: MIPI-CSIS harware instance index (0...1) + * @on: true to enable D-PHY and deassert its reset + * false to disable D-PHY + * @return: 0 on success, or negative error code on failure */ -int s5p_csis_phy_enable(struct platform_device *pdev, bool on); +int s5p_csis_phy_enable(int id, bool on); #endif /* __PLAT_SAMSUNG_MIPI_CSIS_H_ */ diff --git a/include/linux/pmu.h b/include/linux/pmu.h index 84e6a55a120..99b400b8a24 100644 --- a/include/linux/pmu.h +++ b/include/linux/pmu.h @@ -5,137 +5,11 @@ * * Copyright (C) 1998 Paul Mackerras. */ - #ifndef _LINUX_PMU_H #define _LINUX_PMU_H -#define PMU_DRIVER_VERSION 2 - -/* - * PMU commands - */ -#define PMU_POWER_CTRL0 0x10 /* control power of some devices */ -#define PMU_POWER_CTRL 0x11 /* control power of some devices */ -#define PMU_ADB_CMD 0x20 /* send ADB packet */ -#define PMU_ADB_POLL_OFF 0x21 /* disable ADB auto-poll */ -#define PMU_WRITE_NVRAM 0x33 /* write non-volatile RAM */ -#define PMU_READ_NVRAM 0x3b /* read non-volatile RAM */ -#define PMU_SET_RTC 0x30 /* set real-time clock */ -#define PMU_READ_RTC 0x38 /* read real-time clock */ -#define PMU_SET_VOLBUTTON 0x40 /* set volume up/down position */ -#define PMU_BACKLIGHT_BRIGHT 0x41 /* set backlight brightness */ -#define PMU_GET_VOLBUTTON 0x48 /* get volume up/down position */ -#define PMU_PCEJECT 0x4c /* eject PC-card from slot */ -#define PMU_BATTERY_STATE 0x6b /* report battery state etc. */ -#define PMU_SMART_BATTERY_STATE 0x6f /* report battery state (new way) */ -#define PMU_SET_INTR_MASK 0x70 /* set PMU interrupt mask */ -#define PMU_INT_ACK 0x78 /* read interrupt bits */ -#define PMU_SHUTDOWN 0x7e /* turn power off */ -#define PMU_CPU_SPEED 0x7d /* control CPU speed on some models */ -#define PMU_SLEEP 0x7f /* put CPU to sleep */ -#define PMU_POWER_EVENTS 0x8f /* Send power-event commands to PMU */ -#define PMU_I2C_CMD 0x9a /* I2C operations */ -#define PMU_RESET 0xd0 /* reset CPU */ -#define PMU_GET_BRIGHTBUTTON 0xd9 /* report brightness up/down pos */ -#define PMU_GET_COVER 0xdc /* report cover open/closed */ -#define PMU_SYSTEM_READY 0xdf /* tell PMU we are awake */ -#define PMU_GET_VERSION 0xea /* read the PMU version */ - -/* Bits to use with the PMU_POWER_CTRL0 command */ -#define PMU_POW0_ON 0x80 /* OR this to power ON the device */ -#define PMU_POW0_OFF 0x00 /* leave bit 7 to 0 to power it OFF */ -#define PMU_POW0_HARD_DRIVE 0x04 /* Hard drive power (on wallstreet/lombard ?) */ - -/* Bits to use with the PMU_POWER_CTRL command */ -#define PMU_POW_ON 0x80 /* OR this to power ON the device */ -#define PMU_POW_OFF 0x00 /* leave bit 7 to 0 to power it OFF */ -#define PMU_POW_BACKLIGHT 0x01 /* backlight power */ -#define PMU_POW_CHARGER 0x02 /* battery charger power */ -#define PMU_POW_IRLED 0x04 /* IR led power (on wallstreet) */ -#define PMU_POW_MEDIABAY 0x08 /* media bay power (wallstreet/lombard ?) */ - -/* Bits in PMU interrupt and interrupt mask bytes */ -#define PMU_INT_PCEJECT 0x04 /* PC-card eject buttons */ -#define PMU_INT_SNDBRT 0x08 /* sound/brightness up/down buttons */ -#define PMU_INT_ADB 0x10 /* ADB autopoll or reply data */ -#define PMU_INT_BATTERY 0x20 /* Battery state change */ -#define PMU_INT_ENVIRONMENT 0x40 /* Environment interrupts */ -#define PMU_INT_TICK 0x80 /* 1-second tick interrupt */ - -/* Other bits in PMU interrupt valid when PMU_INT_ADB is set */ -#define PMU_INT_ADB_AUTO 0x04 /* ADB autopoll, when PMU_INT_ADB */ -#define PMU_INT_WAITING_CHARGER 0x01 /* ??? */ -#define PMU_INT_AUTO_SRQ_POLL 0x02 /* ??? */ - -/* Bits in the environement message (either obtained via PMU_GET_COVER, - * or via PMU_INT_ENVIRONMENT on core99 */ -#define PMU_ENV_LID_CLOSED 0x01 /* The lid is closed */ - -/* I2C related definitions */ -#define PMU_I2C_MODE_SIMPLE 0 -#define PMU_I2C_MODE_STDSUB 1 -#define PMU_I2C_MODE_COMBINED 2 - -#define PMU_I2C_BUS_STATUS 0 -#define PMU_I2C_BUS_SYSCLK 1 -#define PMU_I2C_BUS_POWER 2 - -#define PMU_I2C_STATUS_OK 0 -#define PMU_I2C_STATUS_DATAREAD 1 -#define PMU_I2C_STATUS_BUSY 0xfe - - -/* Kind of PMU (model) */ -enum { - PMU_UNKNOWN, - PMU_OHARE_BASED, /* 2400, 3400, 3500 (old G3 powerbook) */ - PMU_HEATHROW_BASED, /* PowerBook G3 series */ - PMU_PADDINGTON_BASED, /* 1999 PowerBook G3 */ - PMU_KEYLARGO_BASED, /* Core99 motherboard (PMU99) */ - PMU_68K_V1, /* 68K PMU, version 1 */ - PMU_68K_V2, /* 68K PMU, version 2 */ -}; +#include <uapi/linux/pmu.h> -/* PMU PMU_POWER_EVENTS commands */ -enum { - PMU_PWR_GET_POWERUP_EVENTS = 0x00, - PMU_PWR_SET_POWERUP_EVENTS = 0x01, - PMU_PWR_CLR_POWERUP_EVENTS = 0x02, - PMU_PWR_GET_WAKEUP_EVENTS = 0x03, - PMU_PWR_SET_WAKEUP_EVENTS = 0x04, - PMU_PWR_CLR_WAKEUP_EVENTS = 0x05, -}; - -/* Power events wakeup bits */ -enum { - PMU_PWR_WAKEUP_KEY = 0x01, /* Wake on key press */ - PMU_PWR_WAKEUP_AC_INSERT = 0x02, /* Wake on AC adapter plug */ - PMU_PWR_WAKEUP_AC_CHANGE = 0x04, - PMU_PWR_WAKEUP_LID_OPEN = 0x08, - PMU_PWR_WAKEUP_RING = 0x10, -}; - -/* - * Ioctl commands for the /dev/pmu device - */ -#include <linux/ioctl.h> - -/* no param */ -#define PMU_IOC_SLEEP _IO('B', 0) -/* out param: u32* backlight value: 0 to 15 */ -#define PMU_IOC_GET_BACKLIGHT _IOR('B', 1, size_t) -/* in param: u32 backlight value: 0 to 15 */ -#define PMU_IOC_SET_BACKLIGHT _IOW('B', 2, size_t) -/* out param: u32* PMU model */ -#define PMU_IOC_GET_MODEL _IOR('B', 3, size_t) -/* out param: u32* has_adb: 0 or 1 */ -#define PMU_IOC_HAS_ADB _IOR('B', 4, size_t) -/* out param: u32* can_sleep: 0 or 1 */ -#define PMU_IOC_CAN_SLEEP _IOR('B', 5, size_t) -/* no param, but historically was _IOR('B', 6, 0), meaning 4 bytes */ -#define PMU_IOC_GRAB_BACKLIGHT _IOR('B', 6, size_t) - -#ifdef __KERNEL__ extern int find_via_pmu(void); @@ -208,6 +82,4 @@ extern int pmu_sys_suspended; #define pmu_sys_suspended 0 #endif -#endif /* __KERNEL__ */ - #endif /* _LINUX_PMU_H */ diff --git a/include/linux/poll.h b/include/linux/poll.h index 48fe8bc398d..c08386fb3e0 100644 --- a/include/linux/poll.h +++ b/include/linux/poll.h @@ -1,9 +1,6 @@ #ifndef _LINUX_POLL_H #define _LINUX_POLL_H -#include <asm/poll.h> - -#ifdef __KERNEL__ #include <linux/compiler.h> #include <linux/ktime.h> @@ -12,6 +9,7 @@ #include <linux/fs.h> #include <linux/sysctl.h> #include <asm/uaccess.h> +#include <uapi/linux/poll.h> extern struct ctl_table epoll_table[]; /* for sysctl */ /* ~832 bytes of stack space used max in sys_select/sys_poll before allocating @@ -163,6 +161,4 @@ extern int core_sys_select(int n, fd_set __user *inp, fd_set __user *outp, extern int poll_select_set_timeout(struct timespec *to, long sec, long nsec); -#endif /* KERNEL */ - #endif /* _LINUX_POLL_H */ diff --git a/include/linux/ppp-comp.h b/include/linux/ppp-comp.h index e53ff65935d..4ea1d377e1a 100644 --- a/include/linux/ppp-comp.h +++ b/include/linux/ppp-comp.h @@ -10,6 +10,9 @@ #ifndef _NET_PPP_COMP_H #define _NET_PPP_COMP_H +#include <uapi/linux/ppp-comp.h> + + struct module; /* @@ -98,87 +101,6 @@ struct compressor { #define DECOMP_ERROR -1 /* error detected before decomp. */ #define DECOMP_FATALERROR -2 /* error detected after decomp. */ -/* - * CCP codes. - */ - -#define CCP_CONFREQ 1 -#define CCP_CONFACK 2 -#define CCP_TERMREQ 5 -#define CCP_TERMACK 6 -#define CCP_RESETREQ 14 -#define CCP_RESETACK 15 - -/* - * Max # bytes for a CCP option - */ - -#define CCP_MAX_OPTION_LENGTH 32 - -/* - * Parts of a CCP packet. - */ - -#define CCP_CODE(dp) ((dp)[0]) -#define CCP_ID(dp) ((dp)[1]) -#define CCP_LENGTH(dp) (((dp)[2] << 8) + (dp)[3]) -#define CCP_HDRLEN 4 - -#define CCP_OPT_CODE(dp) ((dp)[0]) -#define CCP_OPT_LENGTH(dp) ((dp)[1]) -#define CCP_OPT_MINLEN 2 - -/* - * Definitions for BSD-Compress. - */ - -#define CI_BSD_COMPRESS 21 /* config. option for BSD-Compress */ -#define CILEN_BSD_COMPRESS 3 /* length of config. option */ - -/* Macros for handling the 3rd byte of the BSD-Compress config option. */ -#define BSD_NBITS(x) ((x) & 0x1F) /* number of bits requested */ -#define BSD_VERSION(x) ((x) >> 5) /* version of option format */ -#define BSD_CURRENT_VERSION 1 /* current version number */ -#define BSD_MAKE_OPT(v, n) (((v) << 5) | (n)) - -#define BSD_MIN_BITS 9 /* smallest code size supported */ -#define BSD_MAX_BITS 15 /* largest code size supported */ - -/* - * Definitions for Deflate. - */ - -#define CI_DEFLATE 26 /* config option for Deflate */ -#define CI_DEFLATE_DRAFT 24 /* value used in original draft RFC */ -#define CILEN_DEFLATE 4 /* length of its config option */ - -#define DEFLATE_MIN_SIZE 9 -#define DEFLATE_MAX_SIZE 15 -#define DEFLATE_METHOD_VAL 8 -#define DEFLATE_SIZE(x) (((x) >> 4) + 8) -#define DEFLATE_METHOD(x) ((x) & 0x0F) -#define DEFLATE_MAKE_OPT(w) ((((w) - 8) << 4) + DEFLATE_METHOD_VAL) -#define DEFLATE_CHK_SEQUENCE 0 - -/* - * Definitions for MPPE. - */ - -#define CI_MPPE 18 /* config option for MPPE */ -#define CILEN_MPPE 6 /* length of config option */ - -/* - * Definitions for other, as yet unsupported, compression methods. - */ - -#define CI_PREDICTOR_1 1 /* config option for Predictor-1 */ -#define CILEN_PREDICTOR_1 2 /* length of its config option */ -#define CI_PREDICTOR_2 2 /* config option for Predictor-2 */ -#define CILEN_PREDICTOR_2 2 /* length of its config option */ - -#ifdef __KERNEL__ extern int ppp_register_compressor(struct compressor *); extern void ppp_unregister_compressor(struct compressor *); -#endif /* __KERNEL__ */ - #endif /* _NET_PPP_COMP_H */ diff --git a/include/linux/ppp_defs.h b/include/linux/ppp_defs.h index ba416f67eb6..28aa0237c8c 100644 --- a/include/linux/ppp_defs.h +++ b/include/linux/ppp_defs.h @@ -7,148 +7,11 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. */ -#include <linux/types.h> - #ifndef _PPP_DEFS_H_ #define _PPP_DEFS_H_ -/* - * The basic PPP frame. - */ -#define PPP_HDRLEN 4 /* octets for standard ppp header */ -#define PPP_FCSLEN 2 /* octets for FCS */ -#define PPP_MRU 1500 /* default MRU = max length of info field */ - -#define PPP_ADDRESS(p) (((__u8 *)(p))[0]) -#define PPP_CONTROL(p) (((__u8 *)(p))[1]) -#define PPP_PROTOCOL(p) ((((__u8 *)(p))[2] << 8) + ((__u8 *)(p))[3]) - -/* - * Significant octet values. - */ -#define PPP_ALLSTATIONS 0xff /* All-Stations broadcast address */ -#define PPP_UI 0x03 /* Unnumbered Information */ -#define PPP_FLAG 0x7e /* Flag Sequence */ -#define PPP_ESCAPE 0x7d /* Asynchronous Control Escape */ -#define PPP_TRANS 0x20 /* Asynchronous transparency modifier */ - -/* - * Protocol field values. - */ -#define PPP_IP 0x21 /* Internet Protocol */ -#define PPP_AT 0x29 /* AppleTalk Protocol */ -#define PPP_IPX 0x2b /* IPX protocol */ -#define PPP_VJC_COMP 0x2d /* VJ compressed TCP */ -#define PPP_VJC_UNCOMP 0x2f /* VJ uncompressed TCP */ -#define PPP_MP 0x3d /* Multilink protocol */ -#define PPP_IPV6 0x57 /* Internet Protocol Version 6 */ -#define PPP_COMPFRAG 0xfb /* fragment compressed below bundle */ -#define PPP_COMP 0xfd /* compressed packet */ -#define PPP_MPLS_UC 0x0281 /* Multi Protocol Label Switching - Unicast */ -#define PPP_MPLS_MC 0x0283 /* Multi Protocol Label Switching - Multicast */ -#define PPP_IPCP 0x8021 /* IP Control Protocol */ -#define PPP_ATCP 0x8029 /* AppleTalk Control Protocol */ -#define PPP_IPXCP 0x802b /* IPX Control Protocol */ -#define PPP_IPV6CP 0x8057 /* IPv6 Control Protocol */ -#define PPP_CCPFRAG 0x80fb /* CCP at link level (below MP bundle) */ -#define PPP_CCP 0x80fd /* Compression Control Protocol */ -#define PPP_MPLSCP 0x80fd /* MPLS Control Protocol */ -#define PPP_LCP 0xc021 /* Link Control Protocol */ -#define PPP_PAP 0xc023 /* Password Authentication Protocol */ -#define PPP_LQR 0xc025 /* Link Quality Report protocol */ -#define PPP_CHAP 0xc223 /* Cryptographic Handshake Auth. Protocol */ -#define PPP_CBCP 0xc029 /* Callback Control Protocol */ - -/* - * Values for FCS calculations. - */ - -#define PPP_INITFCS 0xffff /* Initial FCS value */ -#define PPP_GOODFCS 0xf0b8 /* Good final FCS value */ - -#ifdef __KERNEL__ #include <linux/crc-ccitt.h> -#define PPP_FCS(fcs, c) crc_ccitt_byte(fcs, c) -#endif - -/* - * Extended asyncmap - allows any character to be escaped. - */ - -typedef __u32 ext_accm[8]; - -/* - * What to do with network protocol (NP) packets. - */ -enum NPmode { - NPMODE_PASS, /* pass the packet through */ - NPMODE_DROP, /* silently drop the packet */ - NPMODE_ERROR, /* return an error */ - NPMODE_QUEUE /* save it up for later. */ -}; - -/* - * Statistics for LQRP and pppstats - */ -struct pppstat { - __u32 ppp_discards; /* # frames discarded */ - - __u32 ppp_ibytes; /* bytes received */ - __u32 ppp_ioctects; /* bytes received not in error */ - __u32 ppp_ipackets; /* packets received */ - __u32 ppp_ierrors; /* receive errors */ - __u32 ppp_ilqrs; /* # LQR frames received */ - - __u32 ppp_obytes; /* raw bytes sent */ - __u32 ppp_ooctects; /* frame bytes sent */ - __u32 ppp_opackets; /* packets sent */ - __u32 ppp_oerrors; /* transmit errors */ - __u32 ppp_olqrs; /* # LQR frames sent */ -}; - -struct vjstat { - __u32 vjs_packets; /* outbound packets */ - __u32 vjs_compressed; /* outbound compressed packets */ - __u32 vjs_searches; /* searches for connection state */ - __u32 vjs_misses; /* times couldn't find conn. state */ - __u32 vjs_uncompressedin; /* inbound uncompressed packets */ - __u32 vjs_compressedin; /* inbound compressed packets */ - __u32 vjs_errorin; /* inbound unknown type packets */ - __u32 vjs_tossed; /* inbound packets tossed because of error */ -}; - -struct compstat { - __u32 unc_bytes; /* total uncompressed bytes */ - __u32 unc_packets; /* total uncompressed packets */ - __u32 comp_bytes; /* compressed bytes */ - __u32 comp_packets; /* compressed packets */ - __u32 inc_bytes; /* incompressible bytes */ - __u32 inc_packets; /* incompressible packets */ - - /* the compression ratio is defined as in_count / bytes_out */ - __u32 in_count; /* Bytes received */ - __u32 bytes_out; /* Bytes transmitted */ - - double ratio; /* not computed in kernel. */ -}; - -struct ppp_stats { - struct pppstat p; /* basic PPP statistics */ - struct vjstat vj; /* VJ header compression statistics */ -}; - -struct ppp_comp_stats { - struct compstat c; /* packet compression statistics */ - struct compstat d; /* packet decompression statistics */ -}; - -/* - * The following structure records the time in seconds since - * the last NP packet was sent or received. - */ -struct ppp_idle { - __kernel_time_t xmit_idle; /* time since last NP packet sent */ - __kernel_time_t recv_idle; /* time since last NP packet received */ -}; +#include <uapi/linux/ppp_defs.h> +#define PPP_FCS(fcs, c) crc_ccitt_byte(fcs, c) #endif /* _PPP_DEFS_H_ */ diff --git a/include/linux/ptrace.h b/include/linux/ptrace.h index 1d24ffad59c..e0ff4689d35 100644 --- a/include/linux/ptrace.h +++ b/include/linux/ptrace.h @@ -1,83 +1,13 @@ #ifndef _LINUX_PTRACE_H #define _LINUX_PTRACE_H -/* ptrace.h */ -/* structs and defines to help the user use the ptrace system call. */ -/* has the defines to get at the registers. */ - -#define PTRACE_TRACEME 0 -#define PTRACE_PEEKTEXT 1 -#define PTRACE_PEEKDATA 2 -#define PTRACE_PEEKUSR 3 -#define PTRACE_POKETEXT 4 -#define PTRACE_POKEDATA 5 -#define PTRACE_POKEUSR 6 -#define PTRACE_CONT 7 -#define PTRACE_KILL 8 -#define PTRACE_SINGLESTEP 9 - -#define PTRACE_ATTACH 16 -#define PTRACE_DETACH 17 - -#define PTRACE_SYSCALL 24 - -/* 0x4200-0x4300 are reserved for architecture-independent additions. */ -#define PTRACE_SETOPTIONS 0x4200 -#define PTRACE_GETEVENTMSG 0x4201 -#define PTRACE_GETSIGINFO 0x4202 -#define PTRACE_SETSIGINFO 0x4203 +#include <linux/compiler.h> /* For unlikely. */ +#include <linux/sched.h> /* For struct task_struct. */ +#include <linux/err.h> /* for IS_ERR_VALUE */ +#include <linux/bug.h> /* For BUG_ON. */ +#include <uapi/linux/ptrace.h> /* - * Generic ptrace interface that exports the architecture specific regsets - * using the corresponding NT_* types (which are also used in the core dump). - * Please note that the NT_PRSTATUS note type in a core dump contains a full - * 'struct elf_prstatus'. But the user_regset for NT_PRSTATUS contains just the - * elf_gregset_t that is the pr_reg field of 'struct elf_prstatus'. For all the - * other user_regset flavors, the user_regset layout and the ELF core dump note - * payload are exactly the same layout. - * - * This interface usage is as follows: - * struct iovec iov = { buf, len}; - * - * ret = ptrace(PTRACE_GETREGSET/PTRACE_SETREGSET, pid, NT_XXX_TYPE, &iov); - * - * On the successful completion, iov.len will be updated by the kernel, - * specifying how much the kernel has written/read to/from the user's iov.buf. - */ -#define PTRACE_GETREGSET 0x4204 -#define PTRACE_SETREGSET 0x4205 - -#define PTRACE_SEIZE 0x4206 -#define PTRACE_INTERRUPT 0x4207 -#define PTRACE_LISTEN 0x4208 - -/* Wait extended result codes for the above trace options. */ -#define PTRACE_EVENT_FORK 1 -#define PTRACE_EVENT_VFORK 2 -#define PTRACE_EVENT_CLONE 3 -#define PTRACE_EVENT_EXEC 4 -#define PTRACE_EVENT_VFORK_DONE 5 -#define PTRACE_EVENT_EXIT 6 -#define PTRACE_EVENT_SECCOMP 7 -/* Extended result codes which enabled by means other than options. */ -#define PTRACE_EVENT_STOP 128 - -/* Options set using PTRACE_SETOPTIONS or using PTRACE_SEIZE @data param */ -#define PTRACE_O_TRACESYSGOOD 1 -#define PTRACE_O_TRACEFORK (1 << PTRACE_EVENT_FORK) -#define PTRACE_O_TRACEVFORK (1 << PTRACE_EVENT_VFORK) -#define PTRACE_O_TRACECLONE (1 << PTRACE_EVENT_CLONE) -#define PTRACE_O_TRACEEXEC (1 << PTRACE_EVENT_EXEC) -#define PTRACE_O_TRACEVFORKDONE (1 << PTRACE_EVENT_VFORK_DONE) -#define PTRACE_O_TRACEEXIT (1 << PTRACE_EVENT_EXIT) -#define PTRACE_O_TRACESECCOMP (1 << PTRACE_EVENT_SECCOMP) - -#define PTRACE_O_MASK 0x000000ff - -#include <asm/ptrace.h> - -#ifdef __KERNEL__ -/* * Ptrace flags * * The owner ship rules for task->ptrace which holds the ptrace @@ -108,12 +38,6 @@ #define PT_BLOCKSTEP_BIT 30 #define PT_BLOCKSTEP (1<<PT_BLOCKSTEP_BIT) -#include <linux/compiler.h> /* For unlikely. */ -#include <linux/sched.h> /* For struct task_struct. */ -#include <linux/err.h> /* for IS_ERR_VALUE */ -#include <linux/bug.h> /* For BUG_ON. */ - - extern long arch_ptrace(struct task_struct *child, long request, unsigned long addr, unsigned long data); extern int ptrace_readdata(struct task_struct *tsk, unsigned long src, char __user *dst, int len); @@ -416,6 +340,4 @@ extern void ptrace_put_breakpoints(struct task_struct *tsk); static inline void ptrace_put_breakpoints(struct task_struct *tsk) { } #endif /* CONFIG_HAVE_HW_BREAKPOINT */ -#endif /* __KERNEL */ - #endif diff --git a/include/linux/quota.h b/include/linux/quota.h index dcd5721e626..58fdef12525 100644 --- a/include/linux/quota.h +++ b/include/linux/quota.h @@ -29,146 +29,9 @@ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ - #ifndef _LINUX_QUOTA_ #define _LINUX_QUOTA_ -#include <linux/errno.h> -#include <linux/types.h> - -#define __DQUOT_VERSION__ "dquot_6.5.2" - -#define MAXQUOTAS 2 -#define USRQUOTA 0 /* element used for user quotas */ -#define GRPQUOTA 1 /* element used for group quotas */ - -/* - * Definitions for the default names of the quotas files. - */ -#define INITQFNAMES { \ - "user", /* USRQUOTA */ \ - "group", /* GRPQUOTA */ \ - "undefined", \ -}; - -/* - * Command definitions for the 'quotactl' system call. - * The commands are broken into a main command defined below - * and a subcommand that is used to convey the type of - * quota that is being manipulated (see above). - */ -#define SUBCMDMASK 0x00ff -#define SUBCMDSHIFT 8 -#define QCMD(cmd, type) (((cmd) << SUBCMDSHIFT) | ((type) & SUBCMDMASK)) - -#define Q_SYNC 0x800001 /* sync disk copy of a filesystems quotas */ -#define Q_QUOTAON 0x800002 /* turn quotas on */ -#define Q_QUOTAOFF 0x800003 /* turn quotas off */ -#define Q_GETFMT 0x800004 /* get quota format used on given filesystem */ -#define Q_GETINFO 0x800005 /* get information about quota files */ -#define Q_SETINFO 0x800006 /* set information about quota files */ -#define Q_GETQUOTA 0x800007 /* get user quota structure */ -#define Q_SETQUOTA 0x800008 /* set user quota structure */ - -/* Quota format type IDs */ -#define QFMT_VFS_OLD 1 -#define QFMT_VFS_V0 2 -#define QFMT_OCFS2 3 -#define QFMT_VFS_V1 4 - -/* Size of block in which space limits are passed through the quota - * interface */ -#define QIF_DQBLKSIZE_BITS 10 -#define QIF_DQBLKSIZE (1 << QIF_DQBLKSIZE_BITS) - -/* - * Quota structure used for communication with userspace via quotactl - * Following flags are used to specify which fields are valid - */ -enum { - QIF_BLIMITS_B = 0, - QIF_SPACE_B, - QIF_ILIMITS_B, - QIF_INODES_B, - QIF_BTIME_B, - QIF_ITIME_B, -}; - -#define QIF_BLIMITS (1 << QIF_BLIMITS_B) -#define QIF_SPACE (1 << QIF_SPACE_B) -#define QIF_ILIMITS (1 << QIF_ILIMITS_B) -#define QIF_INODES (1 << QIF_INODES_B) -#define QIF_BTIME (1 << QIF_BTIME_B) -#define QIF_ITIME (1 << QIF_ITIME_B) -#define QIF_LIMITS (QIF_BLIMITS | QIF_ILIMITS) -#define QIF_USAGE (QIF_SPACE | QIF_INODES) -#define QIF_TIMES (QIF_BTIME | QIF_ITIME) -#define QIF_ALL (QIF_LIMITS | QIF_USAGE | QIF_TIMES) - -struct if_dqblk { - __u64 dqb_bhardlimit; - __u64 dqb_bsoftlimit; - __u64 dqb_curspace; - __u64 dqb_ihardlimit; - __u64 dqb_isoftlimit; - __u64 dqb_curinodes; - __u64 dqb_btime; - __u64 dqb_itime; - __u32 dqb_valid; -}; - -/* - * Structure used for setting quota information about file via quotactl - * Following flags are used to specify which fields are valid - */ -#define IIF_BGRACE 1 -#define IIF_IGRACE 2 -#define IIF_FLAGS 4 -#define IIF_ALL (IIF_BGRACE | IIF_IGRACE | IIF_FLAGS) - -struct if_dqinfo { - __u64 dqi_bgrace; - __u64 dqi_igrace; - __u32 dqi_flags; - __u32 dqi_valid; -}; - -/* - * Definitions for quota netlink interface - */ -#define QUOTA_NL_NOWARN 0 -#define QUOTA_NL_IHARDWARN 1 /* Inode hardlimit reached */ -#define QUOTA_NL_ISOFTLONGWARN 2 /* Inode grace time expired */ -#define QUOTA_NL_ISOFTWARN 3 /* Inode softlimit reached */ -#define QUOTA_NL_BHARDWARN 4 /* Block hardlimit reached */ -#define QUOTA_NL_BSOFTLONGWARN 5 /* Block grace time expired */ -#define QUOTA_NL_BSOFTWARN 6 /* Block softlimit reached */ -#define QUOTA_NL_IHARDBELOW 7 /* Usage got below inode hardlimit */ -#define QUOTA_NL_ISOFTBELOW 8 /* Usage got below inode softlimit */ -#define QUOTA_NL_BHARDBELOW 9 /* Usage got below block hardlimit */ -#define QUOTA_NL_BSOFTBELOW 10 /* Usage got below block softlimit */ - -enum { - QUOTA_NL_C_UNSPEC, - QUOTA_NL_C_WARNING, - __QUOTA_NL_C_MAX, -}; -#define QUOTA_NL_C_MAX (__QUOTA_NL_C_MAX - 1) - -enum { - QUOTA_NL_A_UNSPEC, - QUOTA_NL_A_QTYPE, - QUOTA_NL_A_EXCESS_ID, - QUOTA_NL_A_WARNING, - QUOTA_NL_A_DEV_MAJOR, - QUOTA_NL_A_DEV_MINOR, - QUOTA_NL_A_CAUSED_ID, - __QUOTA_NL_A_MAX, -}; -#define QUOTA_NL_A_MAX (__QUOTA_NL_A_MAX - 1) - - -#ifdef __KERNEL__ #include <linux/list.h> #include <linux/mutex.h> #include <linux/rwsem.h> @@ -183,6 +46,7 @@ enum { #include <linux/atomic.h> #include <linux/uidgid.h> #include <linux/projid.h> +#include <uapi/linux/quota.h> #undef USRQUOTA #undef GRPQUOTA @@ -543,5 +407,4 @@ struct quota_module_name { {QFMT_VFS_V0, "quota_v2"},\ {0, NULL}} -#endif /* __KERNEL__ */ #endif /* _QUOTA_ */ diff --git a/include/linux/random.h b/include/linux/random.h index ac621ce886c..6330ed47b38 100644 --- a/include/linux/random.h +++ b/include/linux/random.h @@ -3,50 +3,11 @@ * * Include file for the random number generator. */ - #ifndef _LINUX_RANDOM_H #define _LINUX_RANDOM_H -#include <linux/types.h> -#include <linux/ioctl.h> -#include <linux/irqnr.h> - -/* ioctl()'s for the random number generator */ - -/* Get the entropy count. */ -#define RNDGETENTCNT _IOR( 'R', 0x00, int ) - -/* Add to (or subtract from) the entropy count. (Superuser only.) */ -#define RNDADDTOENTCNT _IOW( 'R', 0x01, int ) - -/* Get the contents of the entropy pool. (Superuser only.) */ -#define RNDGETPOOL _IOR( 'R', 0x02, int [2] ) - -/* - * Write bytes into the entropy pool and add to the entropy count. - * (Superuser only.) - */ -#define RNDADDENTROPY _IOW( 'R', 0x03, int [2] ) +#include <uapi/linux/random.h> -/* Clear entropy count to 0. (Superuser only.) */ -#define RNDZAPENTCNT _IO( 'R', 0x04 ) - -/* Clear the entropy pool and associated counters. (Superuser only.) */ -#define RNDCLEARPOOL _IO( 'R', 0x06 ) - -struct rand_pool_info { - int entropy_count; - int buf_size; - __u32 buf[0]; -}; - -struct rnd_state { - __u32 s1, s2, s3; -}; - -/* Exported functions */ - -#ifdef __KERNEL__ extern void add_device_randomness(const void *, unsigned int); extern void add_input_randomness(unsigned int type, unsigned int code, @@ -104,6 +65,4 @@ static inline int arch_get_random_int(unsigned int *v) } #endif -#endif /* __KERNEL___ */ - #endif /* _LINUX_RANDOM_H */ diff --git a/include/linux/reboot.h b/include/linux/reboot.h index e0879a70e83..23b36304cd8 100644 --- a/include/linux/reboot.h +++ b/include/linux/reboot.h @@ -1,43 +1,9 @@ #ifndef _LINUX_REBOOT_H #define _LINUX_REBOOT_H -/* - * Magic values required to use _reboot() system call. - */ - -#define LINUX_REBOOT_MAGIC1 0xfee1dead -#define LINUX_REBOOT_MAGIC2 672274793 -#define LINUX_REBOOT_MAGIC2A 85072278 -#define LINUX_REBOOT_MAGIC2B 369367448 -#define LINUX_REBOOT_MAGIC2C 537993216 - - -/* - * Commands accepted by the _reboot() system call. - * - * RESTART Restart system using default command and mode. - * HALT Stop OS and give system control to ROM monitor, if any. - * CAD_ON Ctrl-Alt-Del sequence causes RESTART command. - * CAD_OFF Ctrl-Alt-Del sequence sends SIGINT to init task. - * POWER_OFF Stop OS and remove all power from system, if possible. - * RESTART2 Restart system using given command string. - * SW_SUSPEND Suspend system using software suspend if compiled in. - * KEXEC Restart system using a previously loaded Linux kernel - */ - -#define LINUX_REBOOT_CMD_RESTART 0x01234567 -#define LINUX_REBOOT_CMD_HALT 0xCDEF0123 -#define LINUX_REBOOT_CMD_CAD_ON 0x89ABCDEF -#define LINUX_REBOOT_CMD_CAD_OFF 0x00000000 -#define LINUX_REBOOT_CMD_POWER_OFF 0x4321FEDC -#define LINUX_REBOOT_CMD_RESTART2 0xA1B2C3D4 -#define LINUX_REBOOT_CMD_SW_SUSPEND 0xD000FCE2 -#define LINUX_REBOOT_CMD_KEXEC 0x45584543 - - -#ifdef __KERNEL__ #include <linux/notifier.h> +#include <uapi/linux/reboot.h> #define SYS_DOWN 0x0001 /* Notify of system down */ #define SYS_RESTART SYS_DOWN @@ -84,6 +50,4 @@ extern int orderly_poweroff(bool force); extern void emergency_restart(void); #include <asm/emergency-restart.h> -#endif - #endif /* _LINUX_REBOOT_H */ diff --git a/include/linux/resource.h b/include/linux/resource.h index d01c96c1966..5bc3116e649 100644 --- a/include/linux/resource.h +++ b/include/linux/resource.h @@ -1,82 +1,8 @@ #ifndef _LINUX_RESOURCE_H #define _LINUX_RESOURCE_H -#include <linux/time.h> -#include <linux/types.h> +#include <uapi/linux/resource.h> -/* - * Resource control/accounting header file for linux - */ - -/* - * Definition of struct rusage taken from BSD 4.3 Reno - * - * We don't support all of these yet, but we might as well have them.... - * Otherwise, each time we add new items, programs which depend on this - * structure will lose. This reduces the chances of that happening. - */ -#define RUSAGE_SELF 0 -#define RUSAGE_CHILDREN (-1) -#define RUSAGE_BOTH (-2) /* sys_wait4() uses this */ -#define RUSAGE_THREAD 1 /* only the calling thread */ - -struct rusage { - struct timeval ru_utime; /* user time used */ - struct timeval ru_stime; /* system time used */ - long ru_maxrss; /* maximum resident set size */ - long ru_ixrss; /* integral shared memory size */ - long ru_idrss; /* integral unshared data size */ - long ru_isrss; /* integral unshared stack size */ - long ru_minflt; /* page reclaims */ - long ru_majflt; /* page faults */ - long ru_nswap; /* swaps */ - long ru_inblock; /* block input operations */ - long ru_oublock; /* block output operations */ - long ru_msgsnd; /* messages sent */ - long ru_msgrcv; /* messages received */ - long ru_nsignals; /* signals received */ - long ru_nvcsw; /* voluntary context switches */ - long ru_nivcsw; /* involuntary " */ -}; - -struct rlimit { - unsigned long rlim_cur; - unsigned long rlim_max; -}; - -#define RLIM64_INFINITY (~0ULL) - -struct rlimit64 { - __u64 rlim_cur; - __u64 rlim_max; -}; - -#define PRIO_MIN (-20) -#define PRIO_MAX 20 - -#define PRIO_PROCESS 0 -#define PRIO_PGRP 1 -#define PRIO_USER 2 - -/* - * Limit the stack by to some sane default: root can always - * increase this limit if needed.. 8MB seems reasonable. - */ -#define _STK_LIM (8*1024*1024) - -/* - * GPG2 wants 64kB of mlocked memory, to make sure pass phrases - * and other sensitive information are never written to disk. - */ -#define MLOCK_LIMIT ((PAGE_SIZE > 64*1024) ? PAGE_SIZE : 64*1024) - -/* - * Due to binary compatibility, the actual resource numbers - * may be different for different linux versions.. - */ -#include <asm/resource.h> - -#ifdef __KERNEL__ struct task_struct; @@ -84,6 +10,4 @@ int getrusage(struct task_struct *p, int who, struct rusage __user *ru); int do_prlimit(struct task_struct *tsk, unsigned int resource, struct rlimit *new_rlim, struct rlimit *old_rlim); -#endif /* __KERNEL__ */ - #endif diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h index 0ec590bb361..d9010789b4e 100644 --- a/include/linux/rfkill.h +++ b/include/linux/rfkill.h @@ -1,6 +1,3 @@ -#ifndef __RFKILL_H -#define __RFKILL_H - /* * Copyright (C) 2006 - 2007 Ivo van Doorn * Copyright (C) 2007 Dmitry Torokhov @@ -18,92 +15,11 @@ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ +#ifndef __RFKILL_H +#define __RFKILL_H -#include <linux/types.h> - -/* define userspace visible states */ -#define RFKILL_STATE_SOFT_BLOCKED 0 -#define RFKILL_STATE_UNBLOCKED 1 -#define RFKILL_STATE_HARD_BLOCKED 2 - -/** - * enum rfkill_type - type of rfkill switch. - * - * @RFKILL_TYPE_ALL: toggles all switches (requests only - not a switch type) - * @RFKILL_TYPE_WLAN: switch is on a 802.11 wireless network device. - * @RFKILL_TYPE_BLUETOOTH: switch is on a bluetooth device. - * @RFKILL_TYPE_UWB: switch is on a ultra wideband device. - * @RFKILL_TYPE_WIMAX: switch is on a WiMAX device. - * @RFKILL_TYPE_WWAN: switch is on a wireless WAN device. - * @RFKILL_TYPE_GPS: switch is on a GPS device. - * @RFKILL_TYPE_FM: switch is on a FM radio device. - * @NUM_RFKILL_TYPES: number of defined rfkill types - */ -enum rfkill_type { - RFKILL_TYPE_ALL = 0, - RFKILL_TYPE_WLAN, - RFKILL_TYPE_BLUETOOTH, - RFKILL_TYPE_UWB, - RFKILL_TYPE_WIMAX, - RFKILL_TYPE_WWAN, - RFKILL_TYPE_GPS, - RFKILL_TYPE_FM, - NUM_RFKILL_TYPES, -}; - -/** - * enum rfkill_operation - operation types - * @RFKILL_OP_ADD: a device was added - * @RFKILL_OP_DEL: a device was removed - * @RFKILL_OP_CHANGE: a device's state changed -- userspace changes one device - * @RFKILL_OP_CHANGE_ALL: userspace changes all devices (of a type, or all) - */ -enum rfkill_operation { - RFKILL_OP_ADD = 0, - RFKILL_OP_DEL, - RFKILL_OP_CHANGE, - RFKILL_OP_CHANGE_ALL, -}; - -/** - * struct rfkill_event - events for userspace on /dev/rfkill - * @idx: index of dev rfkill - * @type: type of the rfkill struct - * @op: operation code - * @hard: hard state (0/1) - * @soft: soft state (0/1) - * - * Structure used for userspace communication on /dev/rfkill, - * used for events from the kernel and control to the kernel. - */ -struct rfkill_event { - __u32 idx; - __u8 type; - __u8 op; - __u8 soft, hard; -} __attribute__((packed)); - -/* - * We are planning to be backward and forward compatible with changes - * to the event struct, by adding new, optional, members at the end. - * When reading an event (whether the kernel from userspace or vice - * versa) we need to accept anything that's at least as large as the - * version 1 event size, but might be able to accept other sizes in - * the future. - * - * One exception is the kernel -- we already have two event sizes in - * that we've made the 'hard' member optional since our only option - * is to ignore it anyway. - */ -#define RFKILL_EVENT_SIZE_V1 8 - -/* ioctl for turning off rfkill-input (if present) */ -#define RFKILL_IOC_MAGIC 'R' -#define RFKILL_IOC_NOINPUT 1 -#define RFKILL_IOCTL_NOINPUT _IO(RFKILL_IOC_MAGIC, RFKILL_IOC_NOINPUT) +#include <uapi/linux/rfkill.h> -/* and that's all userspace gets */ -#ifdef __KERNEL__ /* don't allow anyone to use these in the kernel */ enum rfkill_user_states { RFKILL_USER_STATE_SOFT_BLOCKED = RFKILL_STATE_SOFT_BLOCKED, @@ -385,6 +301,4 @@ rfkill_set_led_trigger_name(struct rfkill *rfkill, const char *name) } #endif -#endif /* __KERNEL__ */ - #endif /* RFKILL_H */ diff --git a/include/linux/rtc.h b/include/linux/rtc.h index 20ec4d3bed7..9531845c419 100644 --- a/include/linux/rtc.h +++ b/include/linux/rtc.h @@ -11,102 +11,10 @@ #ifndef _LINUX_RTC_H_ #define _LINUX_RTC_H_ -/* - * The struct used to pass data via the following ioctl. Similar to the - * struct tm in <time.h>, but it needs to be here so that the kernel - * source is self contained, allowing cross-compiles, etc. etc. - */ - -struct rtc_time { - int tm_sec; - int tm_min; - int tm_hour; - int tm_mday; - int tm_mon; - int tm_year; - int tm_wday; - int tm_yday; - int tm_isdst; -}; - -/* - * This data structure is inspired by the EFI (v0.92) wakeup - * alarm API. - */ -struct rtc_wkalrm { - unsigned char enabled; /* 0 = alarm disabled, 1 = alarm enabled */ - unsigned char pending; /* 0 = alarm not pending, 1 = alarm pending */ - struct rtc_time time; /* time the alarm is set to */ -}; - -/* - * Data structure to control PLL correction some better RTC feature - * pll_value is used to get or set current value of correction, - * the rest of the struct is used to query HW capabilities. - * This is modeled after the RTC used in Q40/Q60 computers but - * should be sufficiently flexible for other devices - * - * +ve pll_value means clock will run faster by - * pll_value*pll_posmult/pll_clock - * -ve pll_value means clock will run slower by - * pll_value*pll_negmult/pll_clock - */ - -struct rtc_pll_info { - int pll_ctrl; /* placeholder for fancier control */ - int pll_value; /* get/set correction value */ - int pll_max; /* max +ve (faster) adjustment value */ - int pll_min; /* max -ve (slower) adjustment value */ - int pll_posmult; /* factor for +ve correction */ - int pll_negmult; /* factor for -ve correction */ - long pll_clock; /* base PLL frequency */ -}; - -/* - * ioctl calls that are permitted to the /dev/rtc interface, if - * any of the RTC drivers are enabled. - */ - -#define RTC_AIE_ON _IO('p', 0x01) /* Alarm int. enable on */ -#define RTC_AIE_OFF _IO('p', 0x02) /* ... off */ -#define RTC_UIE_ON _IO('p', 0x03) /* Update int. enable on */ -#define RTC_UIE_OFF _IO('p', 0x04) /* ... off */ -#define RTC_PIE_ON _IO('p', 0x05) /* Periodic int. enable on */ -#define RTC_PIE_OFF _IO('p', 0x06) /* ... off */ -#define RTC_WIE_ON _IO('p', 0x0f) /* Watchdog int. enable on */ -#define RTC_WIE_OFF _IO('p', 0x10) /* ... off */ - -#define RTC_ALM_SET _IOW('p', 0x07, struct rtc_time) /* Set alarm time */ -#define RTC_ALM_READ _IOR('p', 0x08, struct rtc_time) /* Read alarm time */ -#define RTC_RD_TIME _IOR('p', 0x09, struct rtc_time) /* Read RTC time */ -#define RTC_SET_TIME _IOW('p', 0x0a, struct rtc_time) /* Set RTC time */ -#define RTC_IRQP_READ _IOR('p', 0x0b, unsigned long) /* Read IRQ rate */ -#define RTC_IRQP_SET _IOW('p', 0x0c, unsigned long) /* Set IRQ rate */ -#define RTC_EPOCH_READ _IOR('p', 0x0d, unsigned long) /* Read epoch */ -#define RTC_EPOCH_SET _IOW('p', 0x0e, unsigned long) /* Set epoch */ - -#define RTC_WKALM_SET _IOW('p', 0x0f, struct rtc_wkalrm)/* Set wakeup alarm*/ -#define RTC_WKALM_RD _IOR('p', 0x10, struct rtc_wkalrm)/* Get wakeup alarm*/ - -#define RTC_PLL_GET _IOR('p', 0x11, struct rtc_pll_info) /* Get PLL correction */ -#define RTC_PLL_SET _IOW('p', 0x12, struct rtc_pll_info) /* Set PLL correction */ - -#define RTC_VL_READ _IOR('p', 0x13, int) /* Voltage low detector */ -#define RTC_VL_CLR _IO('p', 0x14) /* Clear voltage low information */ - -/* interrupt flags */ -#define RTC_IRQF 0x80 /* Any of the following is active */ -#define RTC_PF 0x40 /* Periodic interrupt */ -#define RTC_AF 0x20 /* Alarm interrupt */ -#define RTC_UF 0x10 /* Update interrupt for 1Hz RTC */ - - -#define RTC_MAX_FREQ 8192 - -#ifdef __KERNEL__ #include <linux/types.h> #include <linux/interrupt.h> +#include <uapi/linux/rtc.h> extern int rtc_month_days(unsigned int month, unsigned int year); extern int rtc_year_days(unsigned int day, unsigned int month, unsigned int year); @@ -282,6 +190,4 @@ extern int rtc_hctosys_ret; #define rtc_hctosys_ret -ENODEV #endif -#endif /* __KERNEL__ */ - #endif /* _LINUX_RTC_H_ */ diff --git a/include/linux/rtnetlink.h b/include/linux/rtnetlink.h index db71c4ad862..7002bbfd5d4 100644 --- a/include/linux/rtnetlink.h +++ b/include/linux/rtnetlink.h @@ -1,616 +1,10 @@ #ifndef __LINUX_RTNETLINK_H #define __LINUX_RTNETLINK_H -#include <linux/types.h> -#include <linux/netlink.h> -#include <linux/if_link.h> -#include <linux/if_addr.h> -#include <linux/neighbour.h> - -/* rtnetlink families. Values up to 127 are reserved for real address - * families, values above 128 may be used arbitrarily. - */ -#define RTNL_FAMILY_IPMR 128 -#define RTNL_FAMILY_IP6MR 129 -#define RTNL_FAMILY_MAX 129 - -/**** - * Routing/neighbour discovery messages. - ****/ - -/* Types of messages */ - -enum { - RTM_BASE = 16, -#define RTM_BASE RTM_BASE - - RTM_NEWLINK = 16, -#define RTM_NEWLINK RTM_NEWLINK - RTM_DELLINK, -#define RTM_DELLINK RTM_DELLINK - RTM_GETLINK, -#define RTM_GETLINK RTM_GETLINK - RTM_SETLINK, -#define RTM_SETLINK RTM_SETLINK - - RTM_NEWADDR = 20, -#define RTM_NEWADDR RTM_NEWADDR - RTM_DELADDR, -#define RTM_DELADDR RTM_DELADDR - RTM_GETADDR, -#define RTM_GETADDR RTM_GETADDR - - RTM_NEWROUTE = 24, -#define RTM_NEWROUTE RTM_NEWROUTE - RTM_DELROUTE, -#define RTM_DELROUTE RTM_DELROUTE - RTM_GETROUTE, -#define RTM_GETROUTE RTM_GETROUTE - - RTM_NEWNEIGH = 28, -#define RTM_NEWNEIGH RTM_NEWNEIGH - RTM_DELNEIGH, -#define RTM_DELNEIGH RTM_DELNEIGH - RTM_GETNEIGH, -#define RTM_GETNEIGH RTM_GETNEIGH - - RTM_NEWRULE = 32, -#define RTM_NEWRULE RTM_NEWRULE - RTM_DELRULE, -#define RTM_DELRULE RTM_DELRULE - RTM_GETRULE, -#define RTM_GETRULE RTM_GETRULE - - RTM_NEWQDISC = 36, -#define RTM_NEWQDISC RTM_NEWQDISC - RTM_DELQDISC, -#define RTM_DELQDISC RTM_DELQDISC - RTM_GETQDISC, -#define RTM_GETQDISC RTM_GETQDISC - - RTM_NEWTCLASS = 40, -#define RTM_NEWTCLASS RTM_NEWTCLASS - RTM_DELTCLASS, -#define RTM_DELTCLASS RTM_DELTCLASS - RTM_GETTCLASS, -#define RTM_GETTCLASS RTM_GETTCLASS - - RTM_NEWTFILTER = 44, -#define RTM_NEWTFILTER RTM_NEWTFILTER - RTM_DELTFILTER, -#define RTM_DELTFILTER RTM_DELTFILTER - RTM_GETTFILTER, -#define RTM_GETTFILTER RTM_GETTFILTER - - RTM_NEWACTION = 48, -#define RTM_NEWACTION RTM_NEWACTION - RTM_DELACTION, -#define RTM_DELACTION RTM_DELACTION - RTM_GETACTION, -#define RTM_GETACTION RTM_GETACTION - - RTM_NEWPREFIX = 52, -#define RTM_NEWPREFIX RTM_NEWPREFIX - - RTM_GETMULTICAST = 58, -#define RTM_GETMULTICAST RTM_GETMULTICAST - - RTM_GETANYCAST = 62, -#define RTM_GETANYCAST RTM_GETANYCAST - - RTM_NEWNEIGHTBL = 64, -#define RTM_NEWNEIGHTBL RTM_NEWNEIGHTBL - RTM_GETNEIGHTBL = 66, -#define RTM_GETNEIGHTBL RTM_GETNEIGHTBL - RTM_SETNEIGHTBL, -#define RTM_SETNEIGHTBL RTM_SETNEIGHTBL - - RTM_NEWNDUSEROPT = 68, -#define RTM_NEWNDUSEROPT RTM_NEWNDUSEROPT - - RTM_NEWADDRLABEL = 72, -#define RTM_NEWADDRLABEL RTM_NEWADDRLABEL - RTM_DELADDRLABEL, -#define RTM_DELADDRLABEL RTM_DELADDRLABEL - RTM_GETADDRLABEL, -#define RTM_GETADDRLABEL RTM_GETADDRLABEL - - RTM_GETDCB = 78, -#define RTM_GETDCB RTM_GETDCB - RTM_SETDCB, -#define RTM_SETDCB RTM_SETDCB - - __RTM_MAX, -#define RTM_MAX (((__RTM_MAX + 3) & ~3) - 1) -}; - -#define RTM_NR_MSGTYPES (RTM_MAX + 1 - RTM_BASE) -#define RTM_NR_FAMILIES (RTM_NR_MSGTYPES >> 2) -#define RTM_FAM(cmd) (((cmd) - RTM_BASE) >> 2) - -/* - Generic structure for encapsulation of optional route information. - It is reminiscent of sockaddr, but with sa_family replaced - with attribute type. - */ - -struct rtattr { - unsigned short rta_len; - unsigned short rta_type; -}; - -/* Macros to handle rtattributes */ - -#define RTA_ALIGNTO 4 -#define RTA_ALIGN(len) ( ((len)+RTA_ALIGNTO-1) & ~(RTA_ALIGNTO-1) ) -#define RTA_OK(rta,len) ((len) >= (int)sizeof(struct rtattr) && \ - (rta)->rta_len >= sizeof(struct rtattr) && \ - (rta)->rta_len <= (len)) -#define RTA_NEXT(rta,attrlen) ((attrlen) -= RTA_ALIGN((rta)->rta_len), \ - (struct rtattr*)(((char*)(rta)) + RTA_ALIGN((rta)->rta_len))) -#define RTA_LENGTH(len) (RTA_ALIGN(sizeof(struct rtattr)) + (len)) -#define RTA_SPACE(len) RTA_ALIGN(RTA_LENGTH(len)) -#define RTA_DATA(rta) ((void*)(((char*)(rta)) + RTA_LENGTH(0))) -#define RTA_PAYLOAD(rta) ((int)((rta)->rta_len) - RTA_LENGTH(0)) - - - - -/****************************************************************************** - * Definitions used in routing table administration. - ****/ - -struct rtmsg { - unsigned char rtm_family; - unsigned char rtm_dst_len; - unsigned char rtm_src_len; - unsigned char rtm_tos; - - unsigned char rtm_table; /* Routing table id */ - unsigned char rtm_protocol; /* Routing protocol; see below */ - unsigned char rtm_scope; /* See below */ - unsigned char rtm_type; /* See below */ - - unsigned rtm_flags; -}; - -/* rtm_type */ - -enum { - RTN_UNSPEC, - RTN_UNICAST, /* Gateway or direct route */ - RTN_LOCAL, /* Accept locally */ - RTN_BROADCAST, /* Accept locally as broadcast, - send as broadcast */ - RTN_ANYCAST, /* Accept locally as broadcast, - but send as unicast */ - RTN_MULTICAST, /* Multicast route */ - RTN_BLACKHOLE, /* Drop */ - RTN_UNREACHABLE, /* Destination is unreachable */ - RTN_PROHIBIT, /* Administratively prohibited */ - RTN_THROW, /* Not in this table */ - RTN_NAT, /* Translate this address */ - RTN_XRESOLVE, /* Use external resolver */ - __RTN_MAX -}; - -#define RTN_MAX (__RTN_MAX - 1) - - -/* rtm_protocol */ - -#define RTPROT_UNSPEC 0 -#define RTPROT_REDIRECT 1 /* Route installed by ICMP redirects; - not used by current IPv4 */ -#define RTPROT_KERNEL 2 /* Route installed by kernel */ -#define RTPROT_BOOT 3 /* Route installed during boot */ -#define RTPROT_STATIC 4 /* Route installed by administrator */ - -/* Values of protocol >= RTPROT_STATIC are not interpreted by kernel; - they are just passed from user and back as is. - It will be used by hypothetical multiple routing daemons. - Note that protocol values should be standardized in order to - avoid conflicts. - */ - -#define RTPROT_GATED 8 /* Apparently, GateD */ -#define RTPROT_RA 9 /* RDISC/ND router advertisements */ -#define RTPROT_MRT 10 /* Merit MRT */ -#define RTPROT_ZEBRA 11 /* Zebra */ -#define RTPROT_BIRD 12 /* BIRD */ -#define RTPROT_DNROUTED 13 /* DECnet routing daemon */ -#define RTPROT_XORP 14 /* XORP */ -#define RTPROT_NTK 15 /* Netsukuku */ -#define RTPROT_DHCP 16 /* DHCP client */ - -/* rtm_scope - - Really it is not scope, but sort of distance to the destination. - NOWHERE are reserved for not existing destinations, HOST is our - local addresses, LINK are destinations, located on directly attached - link and UNIVERSE is everywhere in the Universe. - - Intermediate values are also possible f.e. interior routes - could be assigned a value between UNIVERSE and LINK. -*/ - -enum rt_scope_t { - RT_SCOPE_UNIVERSE=0, -/* User defined values */ - RT_SCOPE_SITE=200, - RT_SCOPE_LINK=253, - RT_SCOPE_HOST=254, - RT_SCOPE_NOWHERE=255 -}; - -/* rtm_flags */ - -#define RTM_F_NOTIFY 0x100 /* Notify user of route change */ -#define RTM_F_CLONED 0x200 /* This route is cloned */ -#define RTM_F_EQUALIZE 0x400 /* Multipath equalizer: NI */ -#define RTM_F_PREFIX 0x800 /* Prefix addresses */ - -/* Reserved table identifiers */ - -enum rt_class_t { - RT_TABLE_UNSPEC=0, -/* User defined values */ - RT_TABLE_COMPAT=252, - RT_TABLE_DEFAULT=253, - RT_TABLE_MAIN=254, - RT_TABLE_LOCAL=255, - RT_TABLE_MAX=0xFFFFFFFF -}; - - -/* Routing message attributes */ - -enum rtattr_type_t { - RTA_UNSPEC, - RTA_DST, - RTA_SRC, - RTA_IIF, - RTA_OIF, - RTA_GATEWAY, - RTA_PRIORITY, - RTA_PREFSRC, - RTA_METRICS, - RTA_MULTIPATH, - RTA_PROTOINFO, /* no longer used */ - RTA_FLOW, - RTA_CACHEINFO, - RTA_SESSION, /* no longer used */ - RTA_MP_ALGO, /* no longer used */ - RTA_TABLE, - RTA_MARK, - __RTA_MAX -}; - -#define RTA_MAX (__RTA_MAX - 1) - -#define RTM_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct rtmsg)))) -#define RTM_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct rtmsg)) - -/* RTM_MULTIPATH --- array of struct rtnexthop. - * - * "struct rtnexthop" describes all necessary nexthop information, - * i.e. parameters of path to a destination via this nexthop. - * - * At the moment it is impossible to set different prefsrc, mtu, window - * and rtt for different paths from multipath. - */ - -struct rtnexthop { - unsigned short rtnh_len; - unsigned char rtnh_flags; - unsigned char rtnh_hops; - int rtnh_ifindex; -}; - -/* rtnh_flags */ - -#define RTNH_F_DEAD 1 /* Nexthop is dead (used by multipath) */ -#define RTNH_F_PERVASIVE 2 /* Do recursive gateway lookup */ -#define RTNH_F_ONLINK 4 /* Gateway is forced on link */ - -/* Macros to handle hexthops */ - -#define RTNH_ALIGNTO 4 -#define RTNH_ALIGN(len) ( ((len)+RTNH_ALIGNTO-1) & ~(RTNH_ALIGNTO-1) ) -#define RTNH_OK(rtnh,len) ((rtnh)->rtnh_len >= sizeof(struct rtnexthop) && \ - ((int)(rtnh)->rtnh_len) <= (len)) -#define RTNH_NEXT(rtnh) ((struct rtnexthop*)(((char*)(rtnh)) + RTNH_ALIGN((rtnh)->rtnh_len))) -#define RTNH_LENGTH(len) (RTNH_ALIGN(sizeof(struct rtnexthop)) + (len)) -#define RTNH_SPACE(len) RTNH_ALIGN(RTNH_LENGTH(len)) -#define RTNH_DATA(rtnh) ((struct rtattr*)(((char*)(rtnh)) + RTNH_LENGTH(0))) - -/* RTM_CACHEINFO */ - -struct rta_cacheinfo { - __u32 rta_clntref; - __u32 rta_lastuse; - __s32 rta_expires; - __u32 rta_error; - __u32 rta_used; - -#define RTNETLINK_HAVE_PEERINFO 1 - __u32 rta_id; - __u32 rta_ts; - __u32 rta_tsage; -}; - -/* RTM_METRICS --- array of struct rtattr with types of RTAX_* */ - -enum { - RTAX_UNSPEC, -#define RTAX_UNSPEC RTAX_UNSPEC - RTAX_LOCK, -#define RTAX_LOCK RTAX_LOCK - RTAX_MTU, -#define RTAX_MTU RTAX_MTU - RTAX_WINDOW, -#define RTAX_WINDOW RTAX_WINDOW - RTAX_RTT, -#define RTAX_RTT RTAX_RTT - RTAX_RTTVAR, -#define RTAX_RTTVAR RTAX_RTTVAR - RTAX_SSTHRESH, -#define RTAX_SSTHRESH RTAX_SSTHRESH - RTAX_CWND, -#define RTAX_CWND RTAX_CWND - RTAX_ADVMSS, -#define RTAX_ADVMSS RTAX_ADVMSS - RTAX_REORDERING, -#define RTAX_REORDERING RTAX_REORDERING - RTAX_HOPLIMIT, -#define RTAX_HOPLIMIT RTAX_HOPLIMIT - RTAX_INITCWND, -#define RTAX_INITCWND RTAX_INITCWND - RTAX_FEATURES, -#define RTAX_FEATURES RTAX_FEATURES - RTAX_RTO_MIN, -#define RTAX_RTO_MIN RTAX_RTO_MIN - RTAX_INITRWND, -#define RTAX_INITRWND RTAX_INITRWND - __RTAX_MAX -}; - -#define RTAX_MAX (__RTAX_MAX - 1) - -#define RTAX_FEATURE_ECN 0x00000001 -#define RTAX_FEATURE_SACK 0x00000002 -#define RTAX_FEATURE_TIMESTAMP 0x00000004 -#define RTAX_FEATURE_ALLFRAG 0x00000008 - -struct rta_session { - __u8 proto; - __u8 pad1; - __u16 pad2; - - union { - struct { - __u16 sport; - __u16 dport; - } ports; - - struct { - __u8 type; - __u8 code; - __u16 ident; - } icmpt; - - __u32 spi; - } u; -}; - -/**** - * General form of address family dependent message. - ****/ - -struct rtgenmsg { - unsigned char rtgen_family; -}; - -/***************************************************************** - * Link layer specific messages. - ****/ - -/* struct ifinfomsg - * passes link level specific information, not dependent - * on network protocol. - */ - -struct ifinfomsg { - unsigned char ifi_family; - unsigned char __ifi_pad; - unsigned short ifi_type; /* ARPHRD_* */ - int ifi_index; /* Link index */ - unsigned ifi_flags; /* IFF_* flags */ - unsigned ifi_change; /* IFF_* change mask */ -}; - -/******************************************************************** - * prefix information - ****/ - -struct prefixmsg { - unsigned char prefix_family; - unsigned char prefix_pad1; - unsigned short prefix_pad2; - int prefix_ifindex; - unsigned char prefix_type; - unsigned char prefix_len; - unsigned char prefix_flags; - unsigned char prefix_pad3; -}; - -enum -{ - PREFIX_UNSPEC, - PREFIX_ADDRESS, - PREFIX_CACHEINFO, - __PREFIX_MAX -}; - -#define PREFIX_MAX (__PREFIX_MAX - 1) - -struct prefix_cacheinfo { - __u32 preferred_time; - __u32 valid_time; -}; - - -/***************************************************************** - * Traffic control messages. - ****/ - -struct tcmsg { - unsigned char tcm_family; - unsigned char tcm__pad1; - unsigned short tcm__pad2; - int tcm_ifindex; - __u32 tcm_handle; - __u32 tcm_parent; - __u32 tcm_info; -}; - -enum { - TCA_UNSPEC, - TCA_KIND, - TCA_OPTIONS, - TCA_STATS, - TCA_XSTATS, - TCA_RATE, - TCA_FCNT, - TCA_STATS2, - TCA_STAB, - __TCA_MAX -}; - -#define TCA_MAX (__TCA_MAX - 1) - -#define TCA_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct tcmsg)))) -#define TCA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct tcmsg)) - -/******************************************************************** - * Neighbor Discovery userland options - ****/ - -struct nduseroptmsg { - unsigned char nduseropt_family; - unsigned char nduseropt_pad1; - unsigned short nduseropt_opts_len; /* Total length of options */ - int nduseropt_ifindex; - __u8 nduseropt_icmp_type; - __u8 nduseropt_icmp_code; - unsigned short nduseropt_pad2; - unsigned int nduseropt_pad3; - /* Followed by one or more ND options */ -}; - -enum { - NDUSEROPT_UNSPEC, - NDUSEROPT_SRCADDR, - __NDUSEROPT_MAX -}; - -#define NDUSEROPT_MAX (__NDUSEROPT_MAX - 1) - -#ifndef __KERNEL__ -/* RTnetlink multicast groups - backwards compatibility for userspace */ -#define RTMGRP_LINK 1 -#define RTMGRP_NOTIFY 2 -#define RTMGRP_NEIGH 4 -#define RTMGRP_TC 8 - -#define RTMGRP_IPV4_IFADDR 0x10 -#define RTMGRP_IPV4_MROUTE 0x20 -#define RTMGRP_IPV4_ROUTE 0x40 -#define RTMGRP_IPV4_RULE 0x80 - -#define RTMGRP_IPV6_IFADDR 0x100 -#define RTMGRP_IPV6_MROUTE 0x200 -#define RTMGRP_IPV6_ROUTE 0x400 -#define RTMGRP_IPV6_IFINFO 0x800 - -#define RTMGRP_DECnet_IFADDR 0x1000 -#define RTMGRP_DECnet_ROUTE 0x4000 - -#define RTMGRP_IPV6_PREFIX 0x20000 -#endif - -/* RTnetlink multicast groups */ -enum rtnetlink_groups { - RTNLGRP_NONE, -#define RTNLGRP_NONE RTNLGRP_NONE - RTNLGRP_LINK, -#define RTNLGRP_LINK RTNLGRP_LINK - RTNLGRP_NOTIFY, -#define RTNLGRP_NOTIFY RTNLGRP_NOTIFY - RTNLGRP_NEIGH, -#define RTNLGRP_NEIGH RTNLGRP_NEIGH - RTNLGRP_TC, -#define RTNLGRP_TC RTNLGRP_TC - RTNLGRP_IPV4_IFADDR, -#define RTNLGRP_IPV4_IFADDR RTNLGRP_IPV4_IFADDR - RTNLGRP_IPV4_MROUTE, -#define RTNLGRP_IPV4_MROUTE RTNLGRP_IPV4_MROUTE - RTNLGRP_IPV4_ROUTE, -#define RTNLGRP_IPV4_ROUTE RTNLGRP_IPV4_ROUTE - RTNLGRP_IPV4_RULE, -#define RTNLGRP_IPV4_RULE RTNLGRP_IPV4_RULE - RTNLGRP_IPV6_IFADDR, -#define RTNLGRP_IPV6_IFADDR RTNLGRP_IPV6_IFADDR - RTNLGRP_IPV6_MROUTE, -#define RTNLGRP_IPV6_MROUTE RTNLGRP_IPV6_MROUTE - RTNLGRP_IPV6_ROUTE, -#define RTNLGRP_IPV6_ROUTE RTNLGRP_IPV6_ROUTE - RTNLGRP_IPV6_IFINFO, -#define RTNLGRP_IPV6_IFINFO RTNLGRP_IPV6_IFINFO - RTNLGRP_DECnet_IFADDR, -#define RTNLGRP_DECnet_IFADDR RTNLGRP_DECnet_IFADDR - RTNLGRP_NOP2, - RTNLGRP_DECnet_ROUTE, -#define RTNLGRP_DECnet_ROUTE RTNLGRP_DECnet_ROUTE - RTNLGRP_DECnet_RULE, -#define RTNLGRP_DECnet_RULE RTNLGRP_DECnet_RULE - RTNLGRP_NOP4, - RTNLGRP_IPV6_PREFIX, -#define RTNLGRP_IPV6_PREFIX RTNLGRP_IPV6_PREFIX - RTNLGRP_IPV6_RULE, -#define RTNLGRP_IPV6_RULE RTNLGRP_IPV6_RULE - RTNLGRP_ND_USEROPT, -#define RTNLGRP_ND_USEROPT RTNLGRP_ND_USEROPT - RTNLGRP_PHONET_IFADDR, -#define RTNLGRP_PHONET_IFADDR RTNLGRP_PHONET_IFADDR - RTNLGRP_PHONET_ROUTE, -#define RTNLGRP_PHONET_ROUTE RTNLGRP_PHONET_ROUTE - RTNLGRP_DCB, -#define RTNLGRP_DCB RTNLGRP_DCB - __RTNLGRP_MAX -}; -#define RTNLGRP_MAX (__RTNLGRP_MAX - 1) - -/* TC action piece */ -struct tcamsg { - unsigned char tca_family; - unsigned char tca__pad1; - unsigned short tca__pad2; -}; -#define TA_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct tcamsg)))) -#define TA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct tcamsg)) -#define TCA_ACT_TAB 1 /* attr type must be >=1 */ -#define TCAA_MAX 1 - -/* New extended info filters for IFLA_EXT_MASK */ -#define RTEXT_FILTER_VF (1 << 0) - -/* End of information exported to user level */ - -#ifdef __KERNEL__ #include <linux/mutex.h> #include <linux/netdevice.h> +#include <uapi/linux/rtnetlink.h> extern int rtnetlink_send(struct sk_buff *skb, struct net *net, u32 pid, u32 group, int echo); extern int rtnl_unicast(struct sk_buff *skb, struct net *net, u32 pid); @@ -675,7 +69,4 @@ extern int ndo_dflt_fdb_dump(struct sk_buff *skb, struct netlink_callback *cb, struct net_device *dev, int idx); -#endif /* __KERNEL__ */ - - #endif /* __LINUX_RTNETLINK_H */ diff --git a/include/linux/scc.h b/include/linux/scc.h index 3495bd953cc..c5a00496267 100644 --- a/include/linux/scc.h +++ b/include/linux/scc.h @@ -1,175 +1,9 @@ /* $Id: scc.h,v 1.29 1997/04/02 14:56:45 jreuter Exp jreuter $ */ - #ifndef _SCC_H #define _SCC_H +#include <uapi/linux/scc.h> -/* selection of hardware types */ - -#define PA0HZP 0x00 /* hardware type for PA0HZP SCC card and compatible */ -#define EAGLE 0x01 /* hardware type for EAGLE card */ -#define PC100 0x02 /* hardware type for PC100 card */ -#define PRIMUS 0x04 /* hardware type for PRIMUS-PC (DG9BL) card */ -#define DRSI 0x08 /* hardware type for DRSI PC*Packet card */ -#define BAYCOM 0x10 /* hardware type for BayCom (U)SCC */ - -/* DEV ioctl() commands */ - -enum SCC_ioctl_cmds { - SIOCSCCRESERVED = SIOCDEVPRIVATE, - SIOCSCCCFG, - SIOCSCCINI, - SIOCSCCCHANINI, - SIOCSCCSMEM, - SIOCSCCGKISS, - SIOCSCCSKISS, - SIOCSCCGSTAT, - SIOCSCCCAL -}; - -/* Device parameter control (from WAMPES) */ - -enum L1_params { - PARAM_DATA, - PARAM_TXDELAY, - PARAM_PERSIST, - PARAM_SLOTTIME, - PARAM_TXTAIL, - PARAM_FULLDUP, - PARAM_SOFTDCD, /* was: PARAM_HW */ - PARAM_MUTE, /* ??? */ - PARAM_DTR, - PARAM_RTS, - PARAM_SPEED, - PARAM_ENDDELAY, /* ??? */ - PARAM_GROUP, - PARAM_IDLE, - PARAM_MIN, - PARAM_MAXKEY, - PARAM_WAIT, - PARAM_MAXDEFER, - PARAM_TX, - PARAM_HWEVENT = 31, - PARAM_RETURN = 255 /* reset kiss mode */ -}; - -/* fulldup parameter */ - -enum FULLDUP_modes { - KISS_DUPLEX_HALF, /* normal CSMA operation */ - KISS_DUPLEX_FULL, /* fullduplex, key down trx after transmission */ - KISS_DUPLEX_LINK, /* fullduplex, key down trx after 'idletime' sec */ - KISS_DUPLEX_OPTIMA /* fullduplex, let the protocol layer control the hw */ -}; - -/* misc. parameters */ - -#define TIMER_OFF 65535U /* to switch off timers */ -#define NO_SUCH_PARAM 65534U /* param not implemented */ - -/* HWEVENT parameter */ - -enum HWEVENT_opts { - HWEV_DCD_ON, - HWEV_DCD_OFF, - HWEV_ALL_SENT -}; - -/* channel grouping */ - -#define RXGROUP 0100 /* if set, only tx when all channels clear */ -#define TXGROUP 0200 /* if set, don't transmit simultaneously */ - -/* Tx/Rx clock sources */ - -enum CLOCK_sources { - CLK_DPLL, /* normal halfduplex operation */ - CLK_EXTERNAL, /* external clocking (G3RUH/DF9IC modems) */ - CLK_DIVIDER, /* Rx = DPLL, Tx = divider (fullduplex with */ - /* modems without clock regeneration */ - CLK_BRG /* experimental fullduplex mode with DPLL/BRG for */ - /* MODEMs without clock recovery */ -}; - -/* Tx state */ - -enum TX_state { - TXS_IDLE, /* Transmitter off, no data pending */ - TXS_BUSY, /* waiting for permission to send / tailtime */ - TXS_ACTIVE, /* Transmitter on, sending data */ - TXS_NEWFRAME, /* reset CRC and send (next) frame */ - TXS_IDLE2, /* Transmitter on, no data pending */ - TXS_WAIT, /* Waiting for Mintime to expire */ - TXS_TIMEOUT /* We had a transmission timeout */ -}; - -typedef unsigned long io_port; /* type definition for an 'io port address' */ - -/* SCC statistical information */ - -struct scc_stat { - long rxints; /* Receiver interrupts */ - long txints; /* Transmitter interrupts */ - long exints; /* External/status interrupts */ - long spints; /* Special receiver interrupts */ - - long txframes; /* Packets sent */ - long rxframes; /* Number of Frames Actually Received */ - long rxerrs; /* CRC Errors */ - long txerrs; /* KISS errors */ - - unsigned int nospace; /* "Out of buffers" */ - unsigned int rx_over; /* Receiver Overruns */ - unsigned int tx_under; /* Transmitter Underruns */ - - unsigned int tx_state; /* Transmitter state */ - int tx_queued; /* tx frames enqueued */ - - unsigned int maxqueue; /* allocated tx_buffers */ - unsigned int bufsize; /* used buffersize */ -}; - -struct scc_modem { - long speed; /* Line speed, bps */ - char clocksrc; /* 0 = DPLL, 1 = external, 2 = divider */ - char nrz; /* NRZ instead of NRZI */ -}; - -struct scc_kiss_cmd { - int command; /* one of the KISS-Commands defined above */ - unsigned param; /* KISS-Param */ -}; - -struct scc_hw_config { - io_port data_a; /* data port channel A */ - io_port ctrl_a; /* control port channel A */ - io_port data_b; /* data port channel B */ - io_port ctrl_b; /* control port channel B */ - io_port vector_latch; /* INTACK-Latch (#) */ - io_port special; /* special function port */ - - int irq; /* irq */ - long clock; /* clock */ - char option; /* command for function port */ - - char brand; /* hardware type */ - char escc; /* use ext. features of a 8580/85180/85280 */ -}; - -/* (#) only one INTACK latch allowed. */ - - -struct scc_mem_config { - unsigned int dummy; - unsigned int bufsize; -}; - -struct scc_calibrate { - unsigned int time; - unsigned char pattern; -}; - -#ifdef __KERNEL__ enum {TX_OFF, TX_ON}; /* command for scc_key_trx() */ @@ -248,5 +82,4 @@ struct scc_channel { spinlock_t lock; /* Channel guard lock */ }; -#endif /* defined(__KERNEL__) */ #endif /* defined(_SCC_H) */ diff --git a/include/linux/sched.h b/include/linux/sched.h index a83ca5816ec..0dd42a02df2 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1,48 +1,8 @@ #ifndef _LINUX_SCHED_H #define _LINUX_SCHED_H -/* - * cloning flags: - */ -#define CSIGNAL 0x000000ff /* signal mask to be sent at exit */ -#define CLONE_VM 0x00000100 /* set if VM shared between processes */ -#define CLONE_FS 0x00000200 /* set if fs info shared between processes */ -#define CLONE_FILES 0x00000400 /* set if open files shared between processes */ -#define CLONE_SIGHAND 0x00000800 /* set if signal handlers and blocked signals shared */ -#define CLONE_PTRACE 0x00002000 /* set if we want to let tracing continue on the child too */ -#define CLONE_VFORK 0x00004000 /* set if the parent wants the child to wake it up on mm_release */ -#define CLONE_PARENT 0x00008000 /* set if we want to have the same parent as the cloner */ -#define CLONE_THREAD 0x00010000 /* Same thread group? */ -#define CLONE_NEWNS 0x00020000 /* New namespace group? */ -#define CLONE_SYSVSEM 0x00040000 /* share system V SEM_UNDO semantics */ -#define CLONE_SETTLS 0x00080000 /* create a new TLS for the child */ -#define CLONE_PARENT_SETTID 0x00100000 /* set the TID in the parent */ -#define CLONE_CHILD_CLEARTID 0x00200000 /* clear the TID in the child */ -#define CLONE_DETACHED 0x00400000 /* Unused, ignored */ -#define CLONE_UNTRACED 0x00800000 /* set if the tracing process can't force CLONE_PTRACE on this clone */ -#define CLONE_CHILD_SETTID 0x01000000 /* set the TID in the child */ -/* 0x02000000 was previously the unused CLONE_STOPPED (Start in stopped state) - and is now available for re-use. */ -#define CLONE_NEWUTS 0x04000000 /* New utsname group? */ -#define CLONE_NEWIPC 0x08000000 /* New ipcs */ -#define CLONE_NEWUSER 0x10000000 /* New user namespace */ -#define CLONE_NEWPID 0x20000000 /* New pid namespace */ -#define CLONE_NEWNET 0x40000000 /* New network namespace */ -#define CLONE_IO 0x80000000 /* Clone io context */ - -/* - * Scheduling policies - */ -#define SCHED_NORMAL 0 -#define SCHED_FIFO 1 -#define SCHED_RR 2 -#define SCHED_BATCH 3 -/* SCHED_ISO: reserved but not implemented yet */ -#define SCHED_IDLE 5 -/* Can be ORed in to make sure the process is reverted back to SCHED_NORMAL on fork */ -#define SCHED_RESET_ON_FORK 0x40000000 +#include <uapi/linux/sched.h> -#ifdef __KERNEL__ struct sched_param { int sched_priority; @@ -2828,6 +2788,4 @@ static inline unsigned long rlimit_max(unsigned int limit) return task_rlimit_max(current, limit); } -#endif /* __KERNEL__ */ - #endif diff --git a/include/linux/screen_info.h b/include/linux/screen_info.h index fb3c5a8fef3..005bf3e38db 100644 --- a/include/linux/screen_info.h +++ b/include/linux/screen_info.h @@ -1,76 +1,8 @@ #ifndef _SCREEN_INFO_H #define _SCREEN_INFO_H -#include <linux/types.h> +#include <uapi/linux/screen_info.h> -/* - * These are set up by the setup-routine at boot-time: - */ - -struct screen_info { - __u8 orig_x; /* 0x00 */ - __u8 orig_y; /* 0x01 */ - __u16 ext_mem_k; /* 0x02 */ - __u16 orig_video_page; /* 0x04 */ - __u8 orig_video_mode; /* 0x06 */ - __u8 orig_video_cols; /* 0x07 */ - __u8 flags; /* 0x08 */ - __u8 unused2; /* 0x09 */ - __u16 orig_video_ega_bx;/* 0x0a */ - __u16 unused3; /* 0x0c */ - __u8 orig_video_lines; /* 0x0e */ - __u8 orig_video_isVGA; /* 0x0f */ - __u16 orig_video_points;/* 0x10 */ - - /* VESA graphic mode -- linear frame buffer */ - __u16 lfb_width; /* 0x12 */ - __u16 lfb_height; /* 0x14 */ - __u16 lfb_depth; /* 0x16 */ - __u32 lfb_base; /* 0x18 */ - __u32 lfb_size; /* 0x1c */ - __u16 cl_magic, cl_offset; /* 0x20 */ - __u16 lfb_linelength; /* 0x24 */ - __u8 red_size; /* 0x26 */ - __u8 red_pos; /* 0x27 */ - __u8 green_size; /* 0x28 */ - __u8 green_pos; /* 0x29 */ - __u8 blue_size; /* 0x2a */ - __u8 blue_pos; /* 0x2b */ - __u8 rsvd_size; /* 0x2c */ - __u8 rsvd_pos; /* 0x2d */ - __u16 vesapm_seg; /* 0x2e */ - __u16 vesapm_off; /* 0x30 */ - __u16 pages; /* 0x32 */ - __u16 vesa_attributes; /* 0x34 */ - __u32 capabilities; /* 0x36 */ - __u8 _reserved[6]; /* 0x3a */ -} __attribute__((packed)); - -#define VIDEO_TYPE_MDA 0x10 /* Monochrome Text Display */ -#define VIDEO_TYPE_CGA 0x11 /* CGA Display */ -#define VIDEO_TYPE_EGAM 0x20 /* EGA/VGA in Monochrome Mode */ -#define VIDEO_TYPE_EGAC 0x21 /* EGA in Color Mode */ -#define VIDEO_TYPE_VGAC 0x22 /* VGA+ in Color Mode */ -#define VIDEO_TYPE_VLFB 0x23 /* VESA VGA in graphic mode */ - -#define VIDEO_TYPE_PICA_S3 0x30 /* ACER PICA-61 local S3 video */ -#define VIDEO_TYPE_MIPS_G364 0x31 /* MIPS Magnum 4000 G364 video */ -#define VIDEO_TYPE_SGI 0x33 /* Various SGI graphics hardware */ - -#define VIDEO_TYPE_TGAC 0x40 /* DEC TGA */ - -#define VIDEO_TYPE_SUN 0x50 /* Sun frame buffer. */ -#define VIDEO_TYPE_SUNPCI 0x51 /* Sun PCI based frame buffer. */ - -#define VIDEO_TYPE_PMAC 0x60 /* PowerMacintosh frame buffer. */ - -#define VIDEO_TYPE_EFI 0x70 /* EFI graphic mode */ - -#define VIDEO_FLAGS_NOCURSOR (1 << 0) /* The video mode has no cursor set */ - -#define VIDEO_CAPABILITY_SKIP_QUIRKS (1 << 0) - -#ifdef __KERNEL__ extern struct screen_info screen_info; #define ORIG_X (screen_info.orig_x) @@ -81,6 +13,4 @@ extern struct screen_info screen_info; #define ORIG_VIDEO_LINES (screen_info.orig_video_lines) #define ORIG_VIDEO_ISVGA (screen_info.orig_video_isVGA) #define ORIG_VIDEO_POINTS (screen_info.orig_video_points) -#endif /* __KERNEL__ */ - #endif /* _SCREEN_INFO_H */ diff --git a/include/linux/sdla.h b/include/linux/sdla.h index 9995c7fc3f6..fe7a967d7de 100644 --- a/include/linux/sdla.h +++ b/include/linux/sdla.h @@ -19,100 +19,11 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ - #ifndef SDLA_H #define SDLA_H -/* adapter type */ -#define SDLA_TYPES -#define SDLA_S502A 5020 -#define SDLA_S502E 5021 -#define SDLA_S503 5030 -#define SDLA_S507 5070 -#define SDLA_S508 5080 -#define SDLA_S509 5090 -#define SDLA_UNKNOWN -1 - -/* port selection flags for the S508 */ -#define SDLA_S508_PORT_V35 0x00 -#define SDLA_S508_PORT_RS232 0x02 - -/* Z80 CPU speeds */ -#define SDLA_CPU_3M 0x00 -#define SDLA_CPU_5M 0x01 -#define SDLA_CPU_7M 0x02 -#define SDLA_CPU_8M 0x03 -#define SDLA_CPU_10M 0x04 -#define SDLA_CPU_16M 0x05 -#define SDLA_CPU_12M 0x06 - -/* some private IOCTLs */ -#define SDLA_IDENTIFY (FRAD_LAST_IOCTL + 1) -#define SDLA_CPUSPEED (FRAD_LAST_IOCTL + 2) -#define SDLA_PROTOCOL (FRAD_LAST_IOCTL + 3) - -#define SDLA_CLEARMEM (FRAD_LAST_IOCTL + 4) -#define SDLA_WRITEMEM (FRAD_LAST_IOCTL + 5) -#define SDLA_READMEM (FRAD_LAST_IOCTL + 6) - -struct sdla_mem { - int addr; - int len; - void __user *data; -}; - -#define SDLA_START (FRAD_LAST_IOCTL + 7) -#define SDLA_STOP (FRAD_LAST_IOCTL + 8) +#include <uapi/linux/sdla.h> -/* some offsets in the Z80's memory space */ -#define SDLA_NMIADDR 0x0000 -#define SDLA_CONF_ADDR 0x0010 -#define SDLA_S502A_NMIADDR 0x0066 -#define SDLA_CODE_BASEADDR 0x0100 -#define SDLA_WINDOW_SIZE 0x2000 -#define SDLA_ADDR_MASK 0x1FFF - -/* largest handleable block of data */ -#define SDLA_MAX_DATA 4080 -#define SDLA_MAX_MTU 4072 /* MAX_DATA - sizeof(fradhdr) */ -#define SDLA_MAX_DLCI 24 - -/* this should be the same as frad_conf */ -struct sdla_conf { - short station; - short config; - short kbaud; - short clocking; - short max_frm; - short T391; - short T392; - short N391; - short N392; - short N393; - short CIR_fwd; - short Bc_fwd; - short Be_fwd; - short CIR_bwd; - short Bc_bwd; - short Be_bwd; -}; - -/* this should be the same as dlci_conf */ -struct sdla_dlci_conf { - short config; - short CIR_fwd; - short Bc_fwd; - short Be_fwd; - short CIR_bwd; - short Bc_bwd; - short Be_bwd; - short Tc_fwd; - short Tc_bwd; - short Tf_max; - short Tb_max; -}; - -#ifdef __KERNEL__ /* important Z80 window addresses */ #define SDLA_CONTROL_WND 0xE000 @@ -331,5 +242,3 @@ struct buf_entry { } __attribute__((packed)); #endif - -#endif diff --git a/include/linux/seccomp.h b/include/linux/seccomp.h index 84f6320da50..6f19cfd1840 100644 --- a/include/linux/seccomp.h +++ b/include/linux/seccomp.h @@ -1,50 +1,8 @@ #ifndef _LINUX_SECCOMP_H #define _LINUX_SECCOMP_H -#include <linux/compiler.h> -#include <linux/types.h> +#include <uapi/linux/seccomp.h> - -/* Valid values for seccomp.mode and prctl(PR_SET_SECCOMP, <mode>) */ -#define SECCOMP_MODE_DISABLED 0 /* seccomp is not in use. */ -#define SECCOMP_MODE_STRICT 1 /* uses hard-coded filter. */ -#define SECCOMP_MODE_FILTER 2 /* uses user-supplied filter. */ - -/* - * All BPF programs must return a 32-bit value. - * The bottom 16-bits are for optional return data. - * The upper 16-bits are ordered from least permissive values to most. - * - * The ordering ensures that a min_t() over composed return values always - * selects the least permissive choice. - */ -#define SECCOMP_RET_KILL 0x00000000U /* kill the task immediately */ -#define SECCOMP_RET_TRAP 0x00030000U /* disallow and force a SIGSYS */ -#define SECCOMP_RET_ERRNO 0x00050000U /* returns an errno */ -#define SECCOMP_RET_TRACE 0x7ff00000U /* pass to a tracer or disallow */ -#define SECCOMP_RET_ALLOW 0x7fff0000U /* allow */ - -/* Masks for the return value sections. */ -#define SECCOMP_RET_ACTION 0x7fff0000U -#define SECCOMP_RET_DATA 0x0000ffffU - -/** - * struct seccomp_data - the format the BPF program executes over. - * @nr: the system call number - * @arch: indicates system call convention as an AUDIT_ARCH_* value - * as defined in <linux/audit.h>. - * @instruction_pointer: at the time of the system call. - * @args: up to 6 system call arguments always stored as 64-bit values - * regardless of the architecture. - */ -struct seccomp_data { - int nr; - __u32 arch; - __u64 instruction_pointer; - __u64 args[6]; -}; - -#ifdef __KERNEL__ #ifdef CONFIG_SECCOMP #include <linux/thread_info.h> @@ -129,5 +87,4 @@ static inline void get_seccomp_filter(struct task_struct *tsk) return; } #endif /* CONFIG_SECCOMP_FILTER */ -#endif /* __KERNEL__ */ #endif /* _LINUX_SECCOMP_H */ diff --git a/include/linux/securebits.h b/include/linux/securebits.h index 33406174cbe..da1b33b33af 100644 --- a/include/linux/securebits.h +++ b/include/linux/securebits.h @@ -1,54 +1,7 @@ #ifndef _LINUX_SECUREBITS_H #define _LINUX_SECUREBITS_H 1 -/* Each securesetting is implemented using two bits. One bit specifies - whether the setting is on or off. The other bit specify whether the - setting is locked or not. A setting which is locked cannot be - changed from user-level. */ -#define issecure_mask(X) (1 << (X)) -#ifdef __KERNEL__ -#define issecure(X) (issecure_mask(X) & current_cred_xxx(securebits)) -#endif - -#define SECUREBITS_DEFAULT 0x00000000 - -/* When set UID 0 has no special privileges. When unset, we support - inheritance of root-permissions and suid-root executable under - compatibility mode. We raise the effective and inheritable bitmasks - *of the executable file* if the effective uid of the new process is - 0. If the real uid is 0, we raise the effective (legacy) bit of the - executable file. */ -#define SECURE_NOROOT 0 -#define SECURE_NOROOT_LOCKED 1 /* make bit-0 immutable */ - -#define SECBIT_NOROOT (issecure_mask(SECURE_NOROOT)) -#define SECBIT_NOROOT_LOCKED (issecure_mask(SECURE_NOROOT_LOCKED)) - -/* When set, setuid to/from uid 0 does not trigger capability-"fixup". - When unset, to provide compatiblility with old programs relying on - set*uid to gain/lose privilege, transitions to/from uid 0 cause - capabilities to be gained/lost. */ -#define SECURE_NO_SETUID_FIXUP 2 -#define SECURE_NO_SETUID_FIXUP_LOCKED 3 /* make bit-2 immutable */ - -#define SECBIT_NO_SETUID_FIXUP (issecure_mask(SECURE_NO_SETUID_FIXUP)) -#define SECBIT_NO_SETUID_FIXUP_LOCKED \ - (issecure_mask(SECURE_NO_SETUID_FIXUP_LOCKED)) - -/* When set, a process can retain its capabilities even after - transitioning to a non-root user (the set-uid fixup suppressed by - bit 2). Bit-4 is cleared when a process calls exec(); setting both - bit 4 and 5 will create a barrier through exec that no exec()'d - child can use this feature again. */ -#define SECURE_KEEP_CAPS 4 -#define SECURE_KEEP_CAPS_LOCKED 5 /* make bit-4 immutable */ - -#define SECBIT_KEEP_CAPS (issecure_mask(SECURE_KEEP_CAPS)) -#define SECBIT_KEEP_CAPS_LOCKED (issecure_mask(SECURE_KEEP_CAPS_LOCKED)) - -#define SECURE_ALL_BITS (issecure_mask(SECURE_NOROOT) | \ - issecure_mask(SECURE_NO_SETUID_FIXUP) | \ - issecure_mask(SECURE_KEEP_CAPS)) -#define SECURE_ALL_LOCKS (SECURE_ALL_BITS << 1) +#include <uapi/linux/securebits.h> +#define issecure(X) (issecure_mask(X) & current_cred_xxx(securebits)) #endif /* !_LINUX_SECUREBITS_H */ diff --git a/include/linux/security.h b/include/linux/security.h index 5b50c4e1a7c..05e88bdcf7d 100644 --- a/include/linux/security.h +++ b/include/linux/security.h @@ -1411,8 +1411,8 @@ struct security_operations { int (*sb_kern_mount) (struct super_block *sb, int flags, void *data); int (*sb_show_options) (struct seq_file *m, struct super_block *sb); int (*sb_statfs) (struct dentry *dentry); - int (*sb_mount) (char *dev_name, struct path *path, - char *type, unsigned long flags, void *data); + int (*sb_mount) (const char *dev_name, struct path *path, + const char *type, unsigned long flags, void *data); int (*sb_umount) (struct vfsmount *mnt, int flags); int (*sb_pivotroot) (struct path *old_path, struct path *new_path); @@ -1694,8 +1694,8 @@ int security_sb_remount(struct super_block *sb, void *data); int security_sb_kern_mount(struct super_block *sb, int flags, void *data); int security_sb_show_options(struct seq_file *m, struct super_block *sb); int security_sb_statfs(struct dentry *dentry); -int security_sb_mount(char *dev_name, struct path *path, - char *type, unsigned long flags, void *data); +int security_sb_mount(const char *dev_name, struct path *path, + const char *type, unsigned long flags, void *data); int security_sb_umount(struct vfsmount *mnt, int flags); int security_sb_pivotroot(struct path *old_path, struct path *new_path); int security_sb_set_mnt_opts(struct super_block *sb, struct security_mnt_opts *opts); @@ -1964,8 +1964,8 @@ static inline int security_sb_statfs(struct dentry *dentry) return 0; } -static inline int security_sb_mount(char *dev_name, struct path *path, - char *type, unsigned long flags, +static inline int security_sb_mount(const char *dev_name, struct path *path, + const char *type, unsigned long flags, void *data) { return 0; diff --git a/include/linux/sem.h b/include/linux/sem.h index 10d6b226afc..53d42650b19 100644 --- a/include/linux/sem.h +++ b/include/linux/sem.h @@ -1,85 +1,10 @@ #ifndef _LINUX_SEM_H #define _LINUX_SEM_H -#include <linux/ipc.h> - -/* semop flags */ -#define SEM_UNDO 0x1000 /* undo the operation on exit */ - -/* semctl Command Definitions. */ -#define GETPID 11 /* get sempid */ -#define GETVAL 12 /* get semval */ -#define GETALL 13 /* get all semval's */ -#define GETNCNT 14 /* get semncnt */ -#define GETZCNT 15 /* get semzcnt */ -#define SETVAL 16 /* set semval */ -#define SETALL 17 /* set all semval's */ - -/* ipcs ctl cmds */ -#define SEM_STAT 18 -#define SEM_INFO 19 - -/* Obsolete, used only for backwards compatibility and libc5 compiles */ -struct semid_ds { - struct ipc_perm sem_perm; /* permissions .. see ipc.h */ - __kernel_time_t sem_otime; /* last semop time */ - __kernel_time_t sem_ctime; /* last change time */ - struct sem *sem_base; /* ptr to first semaphore in array */ - struct sem_queue *sem_pending; /* pending operations to be processed */ - struct sem_queue **sem_pending_last; /* last pending operation */ - struct sem_undo *undo; /* undo requests on this array */ - unsigned short sem_nsems; /* no. of semaphores in array */ -}; - -/* Include the definition of semid64_ds */ -#include <asm/sembuf.h> - -/* semop system calls takes an array of these. */ -struct sembuf { - unsigned short sem_num; /* semaphore index in array */ - short sem_op; /* semaphore operation */ - short sem_flg; /* operation flags */ -}; - -/* arg for semctl system calls. */ -union semun { - int val; /* value for SETVAL */ - struct semid_ds __user *buf; /* buffer for IPC_STAT & IPC_SET */ - unsigned short __user *array; /* array for GETALL & SETALL */ - struct seminfo __user *__buf; /* buffer for IPC_INFO */ - void __user *__pad; -}; - -struct seminfo { - int semmap; - int semmni; - int semmns; - int semmnu; - int semmsl; - int semopm; - int semume; - int semusz; - int semvmx; - int semaem; -}; - -#define SEMMNI 128 /* <= IPCMNI max # of semaphore identifiers */ -#define SEMMSL 250 /* <= 8 000 max num of semaphores per id */ -#define SEMMNS (SEMMNI*SEMMSL) /* <= INT_MAX max # of semaphores in system */ -#define SEMOPM 32 /* <= 1 000 max num of ops per semop call */ -#define SEMVMX 32767 /* <= 32767 semaphore maximum value */ -#define SEMAEM SEMVMX /* adjust on exit max value */ - -/* unused */ -#define SEMUME SEMOPM /* max num of undo entries per process */ -#define SEMMNU SEMMNS /* num of undo structures system wide */ -#define SEMMAP SEMMNS /* # of entries in semaphore map */ -#define SEMUSZ 20 /* sizeof struct sem_undo */ - -#ifdef __KERNEL__ #include <linux/atomic.h> #include <linux/rcupdate.h> #include <linux/cache.h> +#include <uapi/linux/sem.h> struct task_struct; @@ -122,6 +47,4 @@ static inline void exit_sem(struct task_struct *tsk) } #endif -#endif /* __KERNEL__ */ - #endif /* _LINUX_SEM_H */ diff --git a/include/linux/serial.h b/include/linux/serial.h index 861e51de476..0916107c77f 100644 --- a/include/linux/serial.h +++ b/include/linux/serial.h @@ -6,16 +6,11 @@ * Redistribution of this file is permitted under the terms of the GNU * Public License (GPL) */ - #ifndef _LINUX_SERIAL_H #define _LINUX_SERIAL_H -#include <linux/types.h> - -#include <linux/tty_flags.h> - -#ifdef __KERNEL__ #include <asm/page.h> +#include <uapi/linux/serial.h> /* @@ -33,118 +28,6 @@ struct async_icount { */ #define SERIAL_XMIT_SIZE PAGE_SIZE -#endif - -struct serial_struct { - int type; - int line; - unsigned int port; - int irq; - int flags; - int xmit_fifo_size; - int custom_divisor; - int baud_base; - unsigned short close_delay; - char io_type; - char reserved_char[1]; - int hub6; - unsigned short closing_wait; /* time to wait before closing */ - unsigned short closing_wait2; /* no longer used... */ - unsigned char *iomem_base; - unsigned short iomem_reg_shift; - unsigned int port_high; - unsigned long iomap_base; /* cookie passed into ioremap */ -}; - -/* - * For the close wait times, 0 means wait forever for serial port to - * flush its output. 65535 means don't wait at all. - */ -#define ASYNC_CLOSING_WAIT_INF 0 -#define ASYNC_CLOSING_WAIT_NONE 65535 - -/* - * These are the supported serial types. - */ -#define PORT_UNKNOWN 0 -#define PORT_8250 1 -#define PORT_16450 2 -#define PORT_16550 3 -#define PORT_16550A 4 -#define PORT_CIRRUS 5 /* usurped by cyclades.c */ -#define PORT_16650 6 -#define PORT_16650V2 7 -#define PORT_16750 8 -#define PORT_STARTECH 9 /* usurped by cyclades.c */ -#define PORT_16C950 10 /* Oxford Semiconductor */ -#define PORT_16654 11 -#define PORT_16850 12 -#define PORT_RSA 13 /* RSA-DV II/S card */ -#define PORT_MAX 13 - -#define SERIAL_IO_PORT 0 -#define SERIAL_IO_HUB6 1 -#define SERIAL_IO_MEM 2 - -#define UART_CLEAR_FIFO 0x01 -#define UART_USE_FIFO 0x02 -#define UART_STARTECH 0x04 -#define UART_NATSEMI 0x08 - - -/* - * Multiport serial configuration structure --- external structure - */ -struct serial_multiport_struct { - int irq; - int port1; - unsigned char mask1, match1; - int port2; - unsigned char mask2, match2; - int port3; - unsigned char mask3, match3; - int port4; - unsigned char mask4, match4; - int port_monitor; - int reserved[32]; -}; - -/* - * Serial input interrupt line counters -- external structure - * Four lines can interrupt: CTS, DSR, RI, DCD - */ -struct serial_icounter_struct { - int cts, dsr, rng, dcd; - int rx, tx; - int frame, overrun, parity, brk; - int buf_overrun; - int reserved[9]; -}; - -/* - * Serial interface for controlling RS485 settings on chips with suitable - * support. Set with TIOCSRS485 and get with TIOCGRS485 if supported by your - * platform. The set function returns the new state, with any unsupported bits - * reverted appropriately. - */ - -struct serial_rs485 { - __u32 flags; /* RS485 feature flags */ -#define SER_RS485_ENABLED (1 << 0) /* If enabled */ -#define SER_RS485_RTS_ON_SEND (1 << 1) /* Logical level for - RTS pin when - sending */ -#define SER_RS485_RTS_AFTER_SEND (1 << 2) /* Logical level for - RTS pin after sent*/ -#define SER_RS485_RX_DURING_TX (1 << 4) - __u32 delay_rts_before_send; /* Delay before send (milliseconds) */ - __u32 delay_rts_after_send; /* Delay after send (milliseconds) */ - __u32 padding[5]; /* Memory is cheap, new structs - are a royal PITA .. */ -}; - -#ifdef __KERNEL__ #include <linux/compiler.h> -#endif /* __KERNEL__ */ #endif /* _LINUX_SERIAL_H */ diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index f9b22ec7a9f..3c430228d23 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -20,202 +20,6 @@ #ifndef LINUX_SERIAL_CORE_H #define LINUX_SERIAL_CORE_H -#include <linux/serial.h> - -/* - * The type definitions. These are from Ted Ts'o's serial.h - */ -#define PORT_UNKNOWN 0 -#define PORT_8250 1 -#define PORT_16450 2 -#define PORT_16550 3 -#define PORT_16550A 4 -#define PORT_CIRRUS 5 -#define PORT_16650 6 -#define PORT_16650V2 7 -#define PORT_16750 8 -#define PORT_STARTECH 9 -#define PORT_16C950 10 -#define PORT_16654 11 -#define PORT_16850 12 -#define PORT_RSA 13 -#define PORT_NS16550A 14 -#define PORT_XSCALE 15 -#define PORT_RM9000 16 /* PMC-Sierra RM9xxx internal UART */ -#define PORT_OCTEON 17 /* Cavium OCTEON internal UART */ -#define PORT_AR7 18 /* Texas Instruments AR7 internal UART */ -#define PORT_U6_16550A 19 /* ST-Ericsson U6xxx internal UART */ -#define PORT_TEGRA 20 /* NVIDIA Tegra internal UART */ -#define PORT_XR17D15X 21 /* Exar XR17D15x UART */ -#define PORT_LPC3220 22 /* NXP LPC32xx SoC "Standard" UART */ -#define PORT_8250_CIR 23 /* CIR infrared port, has its own driver */ -#define PORT_MAX_8250 23 /* max port ID */ - -/* - * ARM specific type numbers. These are not currently guaranteed - * to be implemented, and will change in the future. These are - * separate so any additions to the old serial.c that occur before - * we are merged can be easily merged here. - */ -#define PORT_PXA 31 -#define PORT_AMBA 32 -#define PORT_CLPS711X 33 -#define PORT_SA1100 34 -#define PORT_UART00 35 -#define PORT_21285 37 - -/* Sparc type numbers. */ -#define PORT_SUNZILOG 38 -#define PORT_SUNSAB 39 - -/* DEC */ -#define PORT_DZ 46 -#define PORT_ZS 47 - -/* Parisc type numbers. */ -#define PORT_MUX 48 - -/* Atmel AT91 / AT32 SoC */ -#define PORT_ATMEL 49 - -/* Macintosh Zilog type numbers */ -#define PORT_MAC_ZILOG 50 /* m68k : not yet implemented */ -#define PORT_PMAC_ZILOG 51 - -/* SH-SCI */ -#define PORT_SCI 52 -#define PORT_SCIF 53 -#define PORT_IRDA 54 - -/* Samsung S3C2410 SoC and derivatives thereof */ -#define PORT_S3C2410 55 - -/* SGI IP22 aka Indy / Challenge S / Indigo 2 */ -#define PORT_IP22ZILOG 56 - -/* Sharp LH7a40x -- an ARM9 SoC series */ -#define PORT_LH7A40X 57 - -/* PPC CPM type number */ -#define PORT_CPM 58 - -/* MPC52xx (and MPC512x) type numbers */ -#define PORT_MPC52xx 59 - -/* IBM icom */ -#define PORT_ICOM 60 - -/* Samsung S3C2440 SoC */ -#define PORT_S3C2440 61 - -/* Motorola i.MX SoC */ -#define PORT_IMX 62 - -/* Marvell MPSC */ -#define PORT_MPSC 63 - -/* TXX9 type number */ -#define PORT_TXX9 64 - -/* NEC VR4100 series SIU/DSIU */ -#define PORT_VR41XX_SIU 65 -#define PORT_VR41XX_DSIU 66 - -/* Samsung S3C2400 SoC */ -#define PORT_S3C2400 67 - -/* M32R SIO */ -#define PORT_M32R_SIO 68 - -/*Digi jsm */ -#define PORT_JSM 69 - -#define PORT_PNX8XXX 70 - -/* Hilscher netx */ -#define PORT_NETX 71 - -/* SUN4V Hypervisor Console */ -#define PORT_SUNHV 72 - -#define PORT_S3C2412 73 - -/* Xilinx uartlite */ -#define PORT_UARTLITE 74 - -/* Blackfin bf5xx */ -#define PORT_BFIN 75 - -/* Micrel KS8695 */ -#define PORT_KS8695 76 - -/* Broadcom SB1250, etc. SOC */ -#define PORT_SB1250_DUART 77 - -/* Freescale ColdFire */ -#define PORT_MCF 78 - -/* Blackfin SPORT */ -#define PORT_BFIN_SPORT 79 - -/* MN10300 on-chip UART numbers */ -#define PORT_MN10300 80 -#define PORT_MN10300_CTS 81 - -#define PORT_SC26XX 82 - -/* SH-SCI */ -#define PORT_SCIFA 83 - -#define PORT_S3C6400 84 - -/* NWPSERIAL */ -#define PORT_NWPSERIAL 85 - -/* MAX3100 */ -#define PORT_MAX3100 86 - -/* Timberdale UART */ -#define PORT_TIMBUART 87 - -/* Qualcomm MSM SoCs */ -#define PORT_MSM 88 - -/* BCM63xx family SoCs */ -#define PORT_BCM63XX 89 - -/* Aeroflex Gaisler GRLIB APBUART */ -#define PORT_APBUART 90 - -/* Altera UARTs */ -#define PORT_ALTERA_JTAGUART 91 -#define PORT_ALTERA_UART 92 - -/* SH-SCI */ -#define PORT_SCIFB 93 - -/* MAX310X */ -#define PORT_MAX310X 94 - -/* High Speed UART for Medfield */ -#define PORT_MFD 95 - -/* TI OMAP-UART */ -#define PORT_OMAP 96 - -/* VIA VT8500 SoC */ -#define PORT_VT8500 97 - -/* Xilinx PSS UART */ -#define PORT_XUARTPS 98 - -/* Atheros AR933X SoC */ -#define PORT_AR933X 99 - -/* Energy Micro efm32 SoC */ -#define PORT_EFMUART 100 - -#ifdef __KERNEL__ #include <linux/compiler.h> #include <linux/interrupt.h> @@ -226,6 +30,7 @@ #include <linux/mutex.h> #include <linux/sysrq.h> #include <linux/pps_kernel.h> +#include <uapi/linux/serial_core.h> struct uart_port; struct serial_struct; @@ -562,6 +367,4 @@ static inline int uart_handle_break(struct uart_port *port) (cflag) & CRTSCTS || \ !((cflag) & CLOCAL)) -#endif - #endif /* LINUX_SERIAL_CORE_H */ diff --git a/include/linux/serio.h b/include/linux/serio.h index 6d6cfd3e94a..36aac733840 100644 --- a/include/linux/serio.h +++ b/include/linux/serio.h @@ -1,6 +1,3 @@ -#ifndef _SERIO_H -#define _SERIO_H - /* * Copyright (C) 1999-2002 Vojtech Pavlik * @@ -8,12 +5,9 @@ * under the terms of the GNU General Public License version 2 as published by * the Free Software Foundation. */ +#ifndef _SERIO_H +#define _SERIO_H -#include <linux/ioctl.h> - -#define SPIOCSTYPE _IOW('q', 0x01, unsigned long) - -#ifdef __KERNEL__ #include <linux/types.h> #include <linux/interrupt.h> @@ -22,6 +16,7 @@ #include <linux/mutex.h> #include <linux/device.h> #include <linux/mod_devicetable.h> +#include <uapi/linux/serio.h> struct serio { void *port_data; @@ -152,68 +147,3 @@ static inline void serio_continue_rx(struct serio *serio) } #endif - -/* - * bit masks for use in "interrupt" flags (3rd argument) - */ -#define SERIO_TIMEOUT 1 -#define SERIO_PARITY 2 -#define SERIO_FRAME 4 - -/* - * Serio types - */ -#define SERIO_XT 0x00 -#define SERIO_8042 0x01 -#define SERIO_RS232 0x02 -#define SERIO_HIL_MLC 0x03 -#define SERIO_PS_PSTHRU 0x05 -#define SERIO_8042_XL 0x06 - -/* - * Serio protocols - */ -#define SERIO_UNKNOWN 0x00 -#define SERIO_MSC 0x01 -#define SERIO_SUN 0x02 -#define SERIO_MS 0x03 -#define SERIO_MP 0x04 -#define SERIO_MZ 0x05 -#define SERIO_MZP 0x06 -#define SERIO_MZPP 0x07 -#define SERIO_VSXXXAA 0x08 -#define SERIO_SUNKBD 0x10 -#define SERIO_WARRIOR 0x18 -#define SERIO_SPACEORB 0x19 -#define SERIO_MAGELLAN 0x1a -#define SERIO_SPACEBALL 0x1b -#define SERIO_GUNZE 0x1c -#define SERIO_IFORCE 0x1d -#define SERIO_STINGER 0x1e -#define SERIO_NEWTON 0x1f -#define SERIO_STOWAWAY 0x20 -#define SERIO_H3600 0x21 -#define SERIO_PS2SER 0x22 -#define SERIO_TWIDKBD 0x23 -#define SERIO_TWIDJOY 0x24 -#define SERIO_HIL 0x25 -#define SERIO_SNES232 0x26 -#define SERIO_SEMTECH 0x27 -#define SERIO_LKKBD 0x28 -#define SERIO_ELO 0x29 -#define SERIO_MICROTOUCH 0x30 -#define SERIO_PENMOUNT 0x31 -#define SERIO_TOUCHRIGHT 0x32 -#define SERIO_TOUCHWIN 0x33 -#define SERIO_TAOSEVM 0x34 -#define SERIO_FUJITSU 0x35 -#define SERIO_ZHENHUA 0x36 -#define SERIO_INEXIO 0x37 -#define SERIO_TOUCHIT213 0x38 -#define SERIO_W8001 0x39 -#define SERIO_DYNAPRO 0x3a -#define SERIO_HAMPSHIRE 0x3b -#define SERIO_PS2MULT 0x3c -#define SERIO_TSC40 0x3d - -#endif diff --git a/include/linux/shm.h b/include/linux/shm.h index edd086883cc..bcf8a6a3ec0 100644 --- a/include/linux/shm.h +++ b/include/linux/shm.h @@ -1,88 +1,11 @@ #ifndef _LINUX_SHM_H_ #define _LINUX_SHM_H_ -#include <linux/ipc.h> -#include <linux/errno.h> -#ifdef __KERNEL__ #include <asm/page.h> -#else -#include <unistd.h> -#endif - -/* - * SHMMAX, SHMMNI and SHMALL are upper limits are defaults which can - * be increased by sysctl - */ +#include <uapi/linux/shm.h> -#define SHMMAX 0x2000000 /* max shared seg size (bytes) */ -#define SHMMIN 1 /* min shared seg size (bytes) */ -#define SHMMNI 4096 /* max num of segs system wide */ -#ifdef __KERNEL__ #define SHMALL (SHMMAX/PAGE_SIZE*(SHMMNI/16)) /* max shm system wide (pages) */ -#else -#define SHMALL (SHMMAX/getpagesize()*(SHMMNI/16)) -#endif -#define SHMSEG SHMMNI /* max shared segs per process */ - -#ifdef __KERNEL__ #include <asm/shmparam.h> -#endif - -/* Obsolete, used only for backwards compatibility and libc5 compiles */ -struct shmid_ds { - struct ipc_perm shm_perm; /* operation perms */ - int shm_segsz; /* size of segment (bytes) */ - __kernel_time_t shm_atime; /* last attach time */ - __kernel_time_t shm_dtime; /* last detach time */ - __kernel_time_t shm_ctime; /* last change time */ - __kernel_ipc_pid_t shm_cpid; /* pid of creator */ - __kernel_ipc_pid_t shm_lpid; /* pid of last operator */ - unsigned short shm_nattch; /* no. of current attaches */ - unsigned short shm_unused; /* compatibility */ - void *shm_unused2; /* ditto - used by DIPC */ - void *shm_unused3; /* unused */ -}; - -/* Include the definition of shmid64_ds and shminfo64 */ -#include <asm/shmbuf.h> - -/* permission flag for shmget */ -#define SHM_R 0400 /* or S_IRUGO from <linux/stat.h> */ -#define SHM_W 0200 /* or S_IWUGO from <linux/stat.h> */ - -/* mode for attach */ -#define SHM_RDONLY 010000 /* read-only access */ -#define SHM_RND 020000 /* round attach address to SHMLBA boundary */ -#define SHM_REMAP 040000 /* take-over region on attach */ -#define SHM_EXEC 0100000 /* execution access */ - -/* super user shmctl commands */ -#define SHM_LOCK 11 -#define SHM_UNLOCK 12 - -/* ipcs ctl commands */ -#define SHM_STAT 13 -#define SHM_INFO 14 - -/* Obsolete, used only for backwards compatibility */ -struct shminfo { - int shmmax; - int shmmin; - int shmmni; - int shmseg; - int shmall; -}; - -struct shm_info { - int used_ids; - unsigned long shm_tot; /* total allocated shm */ - unsigned long shm_rss; /* total resident shm */ - unsigned long shm_swp; /* total swapped shm */ - unsigned long swap_attempts; - unsigned long swap_successes; -}; - -#ifdef __KERNEL__ struct shmid_kernel /* private to the kernel */ { struct kern_ipc_perm shm_perm; @@ -127,6 +50,4 @@ static inline void exit_shm(struct task_struct *task) } #endif -#endif /* __KERNEL__ */ - #endif /* _LINUX_SHM_H_ */ diff --git a/include/linux/signal.h b/include/linux/signal.h index 26b424adc84..e19a011b43b 100644 --- a/include/linux/signal.h +++ b/include/linux/signal.h @@ -1,11 +1,8 @@ #ifndef _LINUX_SIGNAL_H #define _LINUX_SIGNAL_H -#include <asm/signal.h> -#include <asm/siginfo.h> - -#ifdef __KERNEL__ #include <linux/list.h> +#include <uapi/linux/signal.h> struct task_struct; @@ -388,6 +385,4 @@ int unhandled_signal(struct task_struct *tsk, int sig); void signals_init(void); -#endif /* __KERNEL__ */ - #endif /* _LINUX_SIGNAL_H */ diff --git a/include/linux/signalfd.h b/include/linux/signalfd.h index 247399b2979..eadbe227c25 100644 --- a/include/linux/signalfd.h +++ b/include/linux/signalfd.h @@ -4,51 +4,11 @@ * Copyright (C) 2007 Davide Libenzi <davidel@xmailserver.org> * */ - #ifndef _LINUX_SIGNALFD_H #define _LINUX_SIGNALFD_H -#include <linux/types.h> -/* For O_CLOEXEC and O_NONBLOCK */ -#include <linux/fcntl.h> - -/* Flags for signalfd4. */ -#define SFD_CLOEXEC O_CLOEXEC -#define SFD_NONBLOCK O_NONBLOCK - -struct signalfd_siginfo { - __u32 ssi_signo; - __s32 ssi_errno; - __s32 ssi_code; - __u32 ssi_pid; - __u32 ssi_uid; - __s32 ssi_fd; - __u32 ssi_tid; - __u32 ssi_band; - __u32 ssi_overrun; - __u32 ssi_trapno; - __s32 ssi_status; - __s32 ssi_int; - __u64 ssi_ptr; - __u64 ssi_utime; - __u64 ssi_stime; - __u64 ssi_addr; - __u16 ssi_addr_lsb; +#include <uapi/linux/signalfd.h> - /* - * Pad strcture to 128 bytes. Remember to update the - * pad size when you add new members. We use a fixed - * size structure to avoid compatibility problems with - * future versions, and we leave extra space for additional - * members. We use fixed size members because this strcture - * comes out of a read(2) and we really don't want to have - * a compat on read(2). - */ - __u8 __pad[46]; -}; - - -#ifdef __KERNEL__ #ifdef CONFIG_SIGNALFD @@ -71,6 +31,4 @@ static inline void signalfd_cleanup(struct sighand_struct *sighand) { } #endif /* CONFIG_SIGNALFD */ -#endif /* __KERNEL__ */ - #endif /* _LINUX_SIGNALFD_H */ diff --git a/include/linux/sock_diag.h b/include/linux/sock_diag.h index e3e395acc2f..e8d702e0fd8 100644 --- a/include/linux/sock_diag.h +++ b/include/linux/sock_diag.h @@ -1,29 +1,8 @@ #ifndef __SOCK_DIAG_H__ #define __SOCK_DIAG_H__ -#include <linux/types.h> +#include <uapi/linux/sock_diag.h> -#define SOCK_DIAG_BY_FAMILY 20 - -struct sock_diag_req { - __u8 sdiag_family; - __u8 sdiag_protocol; -}; - -enum { - SK_MEMINFO_RMEM_ALLOC, - SK_MEMINFO_RCVBUF, - SK_MEMINFO_WMEM_ALLOC, - SK_MEMINFO_SNDBUF, - SK_MEMINFO_FWD_ALLOC, - SK_MEMINFO_WMEM_QUEUED, - SK_MEMINFO_OPTMEM, - SK_MEMINFO_BACKLOG, - - SK_MEMINFO_VARS, -}; - -#ifdef __KERNEL__ struct sk_buff; struct nlmsghdr; struct sock; @@ -44,5 +23,4 @@ void sock_diag_save_cookie(void *sk, __u32 *cookie); int sock_diag_put_meminfo(struct sock *sk, struct sk_buff *skb, int attr); -#endif /* KERNEL */ #endif diff --git a/include/linux/socket.h b/include/linux/socket.h index ba7b2e817cf..9a546ff853d 100644 --- a/include/linux/socket.h +++ b/include/linux/socket.h @@ -1,30 +1,13 @@ #ifndef _LINUX_SOCKET_H #define _LINUX_SOCKET_H -/* - * Desired design of maximum size and alignment (see RFC2553) - */ -#define _K_SS_MAXSIZE 128 /* Implementation specific max size */ -#define _K_SS_ALIGNSIZE (__alignof__ (struct sockaddr *)) - /* Implementation specific desired alignment */ - -typedef unsigned short __kernel_sa_family_t; - -struct __kernel_sockaddr_storage { - __kernel_sa_family_t ss_family; /* address family */ - /* Following field(s) are implementation specific */ - char __data[_K_SS_MAXSIZE - sizeof(unsigned short)]; - /* space to achieve desired size, */ - /* _SS_MAXSIZE value minus size of ss_family */ -} __attribute__ ((aligned(_K_SS_ALIGNSIZE))); /* force desired alignment */ - -#ifdef __KERNEL__ #include <asm/socket.h> /* arch-dependent defines */ #include <linux/sockios.h> /* the SIOCxxx I/O controls */ #include <linux/uio.h> /* iovec support */ #include <linux/types.h> /* pid_t */ #include <linux/compiler.h> /* __user */ +#include <uapi/linux/socket.h> struct pid; struct cred; @@ -340,5 +323,4 @@ extern int __sys_recvmmsg(int fd, struct mmsghdr __user *mmsg, unsigned int vlen unsigned int flags, struct timespec *timeout); extern int __sys_sendmmsg(int fd, struct mmsghdr __user *mmsg, unsigned int vlen, unsigned int flags); -#endif /* not kernel and not glibc */ #endif /* _LINUX_SOCKET_H */ diff --git a/include/linux/sonet.h b/include/linux/sonet.h index de8832dd272..680f9a31df2 100644 --- a/include/linux/sonet.h +++ b/include/linux/sonet.h @@ -1,64 +1,10 @@ /* sonet.h - SONET/SHD physical layer control */ - -/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */ - - #ifndef LINUX_SONET_H #define LINUX_SONET_H -#define __SONET_ITEMS \ - __HANDLE_ITEM(section_bip); /* section parity errors (B1) */ \ - __HANDLE_ITEM(line_bip); /* line parity errors (B2) */ \ - __HANDLE_ITEM(path_bip); /* path parity errors (B3) */ \ - __HANDLE_ITEM(line_febe); /* line parity errors at remote */ \ - __HANDLE_ITEM(path_febe); /* path parity errors at remote */ \ - __HANDLE_ITEM(corr_hcs); /* correctable header errors */ \ - __HANDLE_ITEM(uncorr_hcs); /* uncorrectable header errors */ \ - __HANDLE_ITEM(tx_cells); /* cells sent */ \ - __HANDLE_ITEM(rx_cells); /* cells received */ - -struct sonet_stats { -#define __HANDLE_ITEM(i) int i - __SONET_ITEMS -#undef __HANDLE_ITEM -} __attribute__ ((packed)); - - -#define SONET_GETSTAT _IOR('a',ATMIOC_PHYTYP,struct sonet_stats) - /* get statistics */ -#define SONET_GETSTATZ _IOR('a',ATMIOC_PHYTYP+1,struct sonet_stats) - /* ... and zero counters */ -#define SONET_SETDIAG _IOWR('a',ATMIOC_PHYTYP+2,int) - /* set error insertion */ -#define SONET_CLRDIAG _IOWR('a',ATMIOC_PHYTYP+3,int) - /* clear error insertion */ -#define SONET_GETDIAG _IOR('a',ATMIOC_PHYTYP+4,int) - /* query error insertion */ -#define SONET_SETFRAMING _IOW('a',ATMIOC_PHYTYP+5,int) - /* set framing mode (SONET/SDH) */ -#define SONET_GETFRAMING _IOR('a',ATMIOC_PHYTYP+6,int) - /* get framing mode */ -#define SONET_GETFRSENSE _IOR('a',ATMIOC_PHYTYP+7, \ - unsigned char[SONET_FRSENSE_SIZE]) /* get framing sense information */ - -#define SONET_INS_SBIP 1 /* section BIP */ -#define SONET_INS_LBIP 2 /* line BIP */ -#define SONET_INS_PBIP 4 /* path BIP */ -#define SONET_INS_FRAME 8 /* out of frame */ -#define SONET_INS_LOS 16 /* set line to zero */ -#define SONET_INS_LAIS 32 /* line alarm indication signal */ -#define SONET_INS_PAIS 64 /* path alarm indication signal */ -#define SONET_INS_HCS 128 /* insert HCS error */ - -#define SONET_FRAME_SONET 0 /* SONET STS-3 framing */ -#define SONET_FRAME_SDH 1 /* SDH STM-1 framing */ - -#define SONET_FRSENSE_SIZE 6 /* C1[3],H1[3] (0xff for unknown) */ - - -#ifdef __KERNEL__ #include <linux/atomic.h> +#include <uapi/linux/sonet.h> struct k_sonet_stats { #define __HANDLE_ITEM(i) atomic_t i @@ -71,5 +17,3 @@ extern void sonet_subtract_stats(struct k_sonet_stats *from, struct sonet_stats *to); #endif - -#endif diff --git a/include/linux/sonypi.h b/include/linux/sonypi.h index c0f87da78f8..0b7cc265cc0 100644 --- a/include/linux/sonypi.h +++ b/include/linux/sonypi.h @@ -32,117 +32,11 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * */ - #ifndef _SONYPI_H_ #define _SONYPI_H_ -#include <linux/types.h> - -/* events the user application reading /dev/sonypi can use */ - -#define SONYPI_EVENT_IGNORE 0 -#define SONYPI_EVENT_JOGDIAL_DOWN 1 -#define SONYPI_EVENT_JOGDIAL_UP 2 -#define SONYPI_EVENT_JOGDIAL_DOWN_PRESSED 3 -#define SONYPI_EVENT_JOGDIAL_UP_PRESSED 4 -#define SONYPI_EVENT_JOGDIAL_PRESSED 5 -#define SONYPI_EVENT_JOGDIAL_RELEASED 6 /* obsolete */ -#define SONYPI_EVENT_CAPTURE_PRESSED 7 -#define SONYPI_EVENT_CAPTURE_RELEASED 8 /* obsolete */ -#define SONYPI_EVENT_CAPTURE_PARTIALPRESSED 9 -#define SONYPI_EVENT_CAPTURE_PARTIALRELEASED 10 -#define SONYPI_EVENT_FNKEY_ESC 11 -#define SONYPI_EVENT_FNKEY_F1 12 -#define SONYPI_EVENT_FNKEY_F2 13 -#define SONYPI_EVENT_FNKEY_F3 14 -#define SONYPI_EVENT_FNKEY_F4 15 -#define SONYPI_EVENT_FNKEY_F5 16 -#define SONYPI_EVENT_FNKEY_F6 17 -#define SONYPI_EVENT_FNKEY_F7 18 -#define SONYPI_EVENT_FNKEY_F8 19 -#define SONYPI_EVENT_FNKEY_F9 20 -#define SONYPI_EVENT_FNKEY_F10 21 -#define SONYPI_EVENT_FNKEY_F11 22 -#define SONYPI_EVENT_FNKEY_F12 23 -#define SONYPI_EVENT_FNKEY_1 24 -#define SONYPI_EVENT_FNKEY_2 25 -#define SONYPI_EVENT_FNKEY_D 26 -#define SONYPI_EVENT_FNKEY_E 27 -#define SONYPI_EVENT_FNKEY_F 28 -#define SONYPI_EVENT_FNKEY_S 29 -#define SONYPI_EVENT_FNKEY_B 30 -#define SONYPI_EVENT_BLUETOOTH_PRESSED 31 -#define SONYPI_EVENT_PKEY_P1 32 -#define SONYPI_EVENT_PKEY_P2 33 -#define SONYPI_EVENT_PKEY_P3 34 -#define SONYPI_EVENT_BACK_PRESSED 35 -#define SONYPI_EVENT_LID_CLOSED 36 -#define SONYPI_EVENT_LID_OPENED 37 -#define SONYPI_EVENT_BLUETOOTH_ON 38 -#define SONYPI_EVENT_BLUETOOTH_OFF 39 -#define SONYPI_EVENT_HELP_PRESSED 40 -#define SONYPI_EVENT_FNKEY_ONLY 41 -#define SONYPI_EVENT_JOGDIAL_FAST_DOWN 42 -#define SONYPI_EVENT_JOGDIAL_FAST_UP 43 -#define SONYPI_EVENT_JOGDIAL_FAST_DOWN_PRESSED 44 -#define SONYPI_EVENT_JOGDIAL_FAST_UP_PRESSED 45 -#define SONYPI_EVENT_JOGDIAL_VFAST_DOWN 46 -#define SONYPI_EVENT_JOGDIAL_VFAST_UP 47 -#define SONYPI_EVENT_JOGDIAL_VFAST_DOWN_PRESSED 48 -#define SONYPI_EVENT_JOGDIAL_VFAST_UP_PRESSED 49 -#define SONYPI_EVENT_ZOOM_PRESSED 50 -#define SONYPI_EVENT_THUMBPHRASE_PRESSED 51 -#define SONYPI_EVENT_MEYE_FACE 52 -#define SONYPI_EVENT_MEYE_OPPOSITE 53 -#define SONYPI_EVENT_MEMORYSTICK_INSERT 54 -#define SONYPI_EVENT_MEMORYSTICK_EJECT 55 -#define SONYPI_EVENT_ANYBUTTON_RELEASED 56 -#define SONYPI_EVENT_BATTERY_INSERT 57 -#define SONYPI_EVENT_BATTERY_REMOVE 58 -#define SONYPI_EVENT_FNKEY_RELEASED 59 -#define SONYPI_EVENT_WIRELESS_ON 60 -#define SONYPI_EVENT_WIRELESS_OFF 61 -#define SONYPI_EVENT_ZOOM_IN_PRESSED 62 -#define SONYPI_EVENT_ZOOM_OUT_PRESSED 63 -#define SONYPI_EVENT_CD_EJECT_PRESSED 64 -#define SONYPI_EVENT_MODEKEY_PRESSED 65 -#define SONYPI_EVENT_PKEY_P4 66 -#define SONYPI_EVENT_PKEY_P5 67 -#define SONYPI_EVENT_SETTINGKEY_PRESSED 68 -#define SONYPI_EVENT_VOLUME_INC_PRESSED 69 -#define SONYPI_EVENT_VOLUME_DEC_PRESSED 70 -#define SONYPI_EVENT_BRIGHTNESS_PRESSED 71 -#define SONYPI_EVENT_MEDIA_PRESSED 72 -#define SONYPI_EVENT_VENDOR_PRESSED 73 - -/* get/set brightness */ -#define SONYPI_IOCGBRT _IOR('v', 0, __u8) -#define SONYPI_IOCSBRT _IOW('v', 0, __u8) - -/* get battery full capacity/remaining capacity */ -#define SONYPI_IOCGBAT1CAP _IOR('v', 2, __u16) -#define SONYPI_IOCGBAT1REM _IOR('v', 3, __u16) -#define SONYPI_IOCGBAT2CAP _IOR('v', 4, __u16) -#define SONYPI_IOCGBAT2REM _IOR('v', 5, __u16) +#include <uapi/linux/sonypi.h> -/* get battery flags: battery1/battery2/ac adapter present */ -#define SONYPI_BFLAGS_B1 0x01 -#define SONYPI_BFLAGS_B2 0x02 -#define SONYPI_BFLAGS_AC 0x04 -#define SONYPI_IOCGBATFLAGS _IOR('v', 7, __u8) - -/* get/set bluetooth subsystem state on/off */ -#define SONYPI_IOCGBLUE _IOR('v', 8, __u8) -#define SONYPI_IOCSBLUE _IOW('v', 9, __u8) - -/* get/set fan state on/off */ -#define SONYPI_IOCGFAN _IOR('v', 10, __u8) -#define SONYPI_IOCSFAN _IOW('v', 11, __u8) - -/* get temperature (C) */ -#define SONYPI_IOCGTEMP _IOR('v', 12, __u8) - -#ifdef __KERNEL__ /* used only for communication between v4l and sonypi */ @@ -166,6 +60,4 @@ #define SONYPI_COMMAND_GETCAMERAROMVERSION 18 /* obsolete */ #define SONYPI_COMMAND_GETCAMERAREVISION 19 /* obsolete */ -#endif /* __KERNEL__ */ - #endif /* _SONYPI_H_ */ diff --git a/include/linux/sound.h b/include/linux/sound.h index fae20ba01fb..73ded040f1d 100644 --- a/include/linux/sound.h +++ b/include/linux/sound.h @@ -1,33 +1,8 @@ #ifndef _LINUX_SOUND_H #define _LINUX_SOUND_H -/* - * Minor numbers for the sound driver. - */ - -#include <linux/fs.h> +#include <uapi/linux/sound.h> -#define SND_DEV_CTL 0 /* Control port /dev/mixer */ -#define SND_DEV_SEQ 1 /* Sequencer output /dev/sequencer (FM - synthesizer and MIDI output) */ -#define SND_DEV_MIDIN 2 /* Raw midi access */ -#define SND_DEV_DSP 3 /* Digitized voice /dev/dsp */ -#define SND_DEV_AUDIO 4 /* Sparc compatible /dev/audio */ -#define SND_DEV_DSP16 5 /* Like /dev/dsp but 16 bits/sample */ -/* #define SND_DEV_STATUS 6 */ /* /dev/sndstat (obsolete) */ -#define SND_DEV_UNUSED 6 -#define SND_DEV_AWFM 7 /* Reserved */ -#define SND_DEV_SEQ2 8 /* /dev/sequencer, level 2 interface */ -/* #define SND_DEV_SNDPROC 9 */ /* /dev/sndproc for programmable devices (not used) */ -/* #define SND_DEV_DMMIDI 9 */ -#define SND_DEV_SYNTH 9 /* Raw synth access /dev/synth (same as /dev/dmfm) */ -#define SND_DEV_DMFM 10 /* Raw synth access /dev/dmfm */ -#define SND_DEV_UNKNOWN11 11 -#define SND_DEV_ADSP 12 /* Like /dev/dsp (obsolete) */ -#define SND_DEV_AMIDI 13 /* Like /dev/midi (obsolete) */ -#define SND_DEV_ADMMIDI 14 /* Like /dev/dmmidi (onsolete) */ - -#ifdef __KERNEL__ /* * Sound core interface functions */ @@ -43,6 +18,4 @@ extern void unregister_sound_special(int unit); extern void unregister_sound_mixer(int unit); extern void unregister_sound_midi(int unit); extern void unregister_sound_dsp(int unit); -#endif /* __KERNEL__ */ - #endif /* _LINUX_SOUND_H */ diff --git a/include/linux/soundcard.h b/include/linux/soundcard.h index dfcf86f013a..96c79cbd79e 100644 --- a/include/linux/soundcard.h +++ b/include/linux/soundcard.h @@ -1,5 +1,3 @@ -#ifndef SOUNDCARD_H -#define SOUNDCARD_H /* * Copyright by Hannu Savolainen 1993-1997 * @@ -23,174 +21,12 @@ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ +#ifndef SOUNDCARD_H +#define SOUNDCARD_H - -/* - * OSS interface version. With versions earlier than 3.6 this value is - * an integer with value less than 361. In versions 3.6 and later - * it's a six digit hexadecimal value. For example value - * of 0x030600 represents OSS version 3.6.0. - * Use ioctl(fd, OSS_GETVERSION, &int) to get the version number of - * the currently active driver. - */ -#define SOUND_VERSION 0x030802 -#define OPEN_SOUND_SYSTEM - -/* In Linux we need to be prepared for cross compiling */ -#include <linux/ioctl.h> - -/* Endian macros. */ -#ifdef __KERNEL__ # include <asm/byteorder.h> -#else -# include <endian.h> -#endif - -/* - * Supported card ID numbers (Should be somewhere else?) - */ - -#define SNDCARD_ADLIB 1 -#define SNDCARD_SB 2 -#define SNDCARD_PAS 3 -#define SNDCARD_GUS 4 -#define SNDCARD_MPU401 5 -#define SNDCARD_SB16 6 -#define SNDCARD_SB16MIDI 7 -#define SNDCARD_UART6850 8 -#define SNDCARD_GUS16 9 -#define SNDCARD_MSS 10 -#define SNDCARD_PSS 11 -#define SNDCARD_SSCAPE 12 -#define SNDCARD_PSS_MPU 13 -#define SNDCARD_PSS_MSS 14 -#define SNDCARD_SSCAPE_MSS 15 -#define SNDCARD_TRXPRO 16 -#define SNDCARD_TRXPRO_SB 17 -#define SNDCARD_TRXPRO_MPU 18 -#define SNDCARD_MAD16 19 -#define SNDCARD_MAD16_MPU 20 -#define SNDCARD_CS4232 21 -#define SNDCARD_CS4232_MPU 22 -#define SNDCARD_MAUI 23 -#define SNDCARD_PSEUDO_MSS 24 -#define SNDCARD_GUSPNP 25 -#define SNDCARD_UART401 26 -/* Sound card numbers 27 to N are reserved. Don't add more numbers here. */ - -/*********************************** - * IOCTL Commands for /dev/sequencer - */ - -#ifndef _SIOWR -#if defined(_IOWR) && (defined(_AIX) || (!defined(sun) && !defined(sparc) && !defined(__sparc__) && !defined(__INCioctlh) && !defined(__Lynx__))) -/* Use already defined ioctl defines if they exist (except with Sun or Sparc) */ -#define SIOCPARM_MASK IOCPARM_MASK -#define SIOC_VOID IOC_VOID -#define SIOC_OUT IOC_OUT -#define SIOC_IN IOC_IN -#define SIOC_INOUT IOC_INOUT -#define _SIOC_SIZE _IOC_SIZE -#define _SIOC_DIR _IOC_DIR -#define _SIOC_NONE _IOC_NONE -#define _SIOC_READ _IOC_READ -#define _SIOC_WRITE _IOC_WRITE -#define _SIO _IO -#define _SIOR _IOR -#define _SIOW _IOW -#define _SIOWR _IOWR -#else +#include <uapi/linux/soundcard.h> -/* Ioctl's have the command encoded in the lower word, - * and the size of any in or out parameters in the upper - * word. The high 2 bits of the upper word are used - * to encode the in/out status of the parameter; for now - * we restrict parameters to at most 8191 bytes. - */ -/* #define SIOCTYPE (0xff<<8) */ -#define SIOCPARM_MASK 0x1fff /* parameters must be < 8192 bytes */ -#define SIOC_VOID 0x00000000 /* no parameters */ -#define SIOC_OUT 0x20000000 /* copy out parameters */ -#define SIOC_IN 0x40000000 /* copy in parameters */ -#define SIOC_INOUT (SIOC_IN|SIOC_OUT) -/* the 0x20000000 is so we can distinguish new ioctl's from old */ -#define _SIO(x,y) ((int)(SIOC_VOID|(x<<8)|y)) -#define _SIOR(x,y,t) ((int)(SIOC_OUT|((sizeof(t)&SIOCPARM_MASK)<<16)|(x<<8)|y)) -#define _SIOW(x,y,t) ((int)(SIOC_IN|((sizeof(t)&SIOCPARM_MASK)<<16)|(x<<8)|y)) -/* this should be _SIORW, but stdio got there first */ -#define _SIOWR(x,y,t) ((int)(SIOC_INOUT|((sizeof(t)&SIOCPARM_MASK)<<16)|(x<<8)|y)) -#define _SIOC_SIZE(x) ((x>>16)&SIOCPARM_MASK) -#define _SIOC_DIR(x) (x & 0xf0000000) -#define _SIOC_NONE SIOC_VOID -#define _SIOC_READ SIOC_OUT -#define _SIOC_WRITE SIOC_IN -# endif /* _IOWR */ -#endif /* !_SIOWR */ - -#define SNDCTL_SEQ_RESET _SIO ('Q', 0) -#define SNDCTL_SEQ_SYNC _SIO ('Q', 1) -#define SNDCTL_SYNTH_INFO _SIOWR('Q', 2, struct synth_info) -#define SNDCTL_SEQ_CTRLRATE _SIOWR('Q', 3, int) /* Set/get timer resolution (HZ) */ -#define SNDCTL_SEQ_GETOUTCOUNT _SIOR ('Q', 4, int) -#define SNDCTL_SEQ_GETINCOUNT _SIOR ('Q', 5, int) -#define SNDCTL_SEQ_PERCMODE _SIOW ('Q', 6, int) -#define SNDCTL_FM_LOAD_INSTR _SIOW ('Q', 7, struct sbi_instrument) /* Obsolete. Don't use!!!!!! */ -#define SNDCTL_SEQ_TESTMIDI _SIOW ('Q', 8, int) -#define SNDCTL_SEQ_RESETSAMPLES _SIOW ('Q', 9, int) -#define SNDCTL_SEQ_NRSYNTHS _SIOR ('Q',10, int) -#define SNDCTL_SEQ_NRMIDIS _SIOR ('Q',11, int) -#define SNDCTL_MIDI_INFO _SIOWR('Q',12, struct midi_info) -#define SNDCTL_SEQ_THRESHOLD _SIOW ('Q',13, int) -#define SNDCTL_SYNTH_MEMAVL _SIOWR('Q',14, int) /* in=dev#, out=memsize */ -#define SNDCTL_FM_4OP_ENABLE _SIOW ('Q',15, int) /* in=dev# */ -#define SNDCTL_SEQ_PANIC _SIO ('Q',17) -#define SNDCTL_SEQ_OUTOFBAND _SIOW ('Q',18, struct seq_event_rec) -#define SNDCTL_SEQ_GETTIME _SIOR ('Q',19, int) -#define SNDCTL_SYNTH_ID _SIOWR('Q',20, struct synth_info) -#define SNDCTL_SYNTH_CONTROL _SIOWR('Q',21, struct synth_control) -#define SNDCTL_SYNTH_REMOVESAMPLE _SIOWR('Q',22, struct remove_sample) - -typedef struct synth_control -{ - int devno; /* Synthesizer # */ - char data[4000]; /* Device spesific command/data record */ -}synth_control; - -typedef struct remove_sample -{ - int devno; /* Synthesizer # */ - int bankno; /* MIDI bank # (0=General MIDI) */ - int instrno; /* MIDI instrument number */ -} remove_sample; - -typedef struct seq_event_rec { - unsigned char arr[8]; -} seq_event_rec; - -#define SNDCTL_TMR_TIMEBASE _SIOWR('T', 1, int) -#define SNDCTL_TMR_START _SIO ('T', 2) -#define SNDCTL_TMR_STOP _SIO ('T', 3) -#define SNDCTL_TMR_CONTINUE _SIO ('T', 4) -#define SNDCTL_TMR_TEMPO _SIOWR('T', 5, int) -#define SNDCTL_TMR_SOURCE _SIOWR('T', 6, int) -# define TMR_INTERNAL 0x00000001 -# define TMR_EXTERNAL 0x00000002 -# define TMR_MODE_MIDI 0x00000010 -# define TMR_MODE_FSK 0x00000020 -# define TMR_MODE_CLS 0x00000040 -# define TMR_MODE_SMPTE 0x00000080 -#define SNDCTL_TMR_METRONOME _SIOW ('T', 7, int) -#define SNDCTL_TMR_SELECT _SIOW ('T', 8, int) - -/* - * Some big endian/little endian handling macros - */ - -#define _LINUX_PATCHKEY_H_INDIRECT -#include <linux/patchkey.h> -#undef _LINUX_PATCHKEY_H_INDIRECT - -#if defined(__KERNEL__) # if defined(__BIG_ENDIAN) # define AFMT_S16_NE AFMT_S16_BE # elif defined(__LITTLE_ENDIAN) @@ -198,1095 +34,4 @@ typedef struct seq_event_rec { # else # error "could not determine byte order" # endif -#else -# if defined(__BYTE_ORDER) -# if __BYTE_ORDER == __BIG_ENDIAN -# define AFMT_S16_NE AFMT_S16_BE -# elif __BYTE_ORDER == __LITTLE_ENDIAN -# define AFMT_S16_NE AFMT_S16_LE -# else -# error "could not determine byte order" -# endif -# endif -#endif - -/* - * Sample loading mechanism for internal synthesizers (/dev/sequencer) - * The following patch_info structure has been designed to support - * Gravis UltraSound. It tries to be universal format for uploading - * sample based patches but is probably too limited. - * - * (PBD) As Hannu guessed, the GUS structure is too limited for - * the WaveFront, but this is the right place for a constant definition. - */ - -struct patch_info { - unsigned short key; /* Use WAVE_PATCH here */ -#define WAVE_PATCH _PATCHKEY(0x04) -#define GUS_PATCH WAVE_PATCH -#define WAVEFRONT_PATCH _PATCHKEY(0x06) - - short device_no; /* Synthesizer number */ - short instr_no; /* Midi pgm# */ - - unsigned int mode; -/* - * The least significant byte has the same format than the GUS .PAT - * files - */ -#define WAVE_16_BITS 0x01 /* bit 0 = 8 or 16 bit wave data. */ -#define WAVE_UNSIGNED 0x02 /* bit 1 = Signed - Unsigned data. */ -#define WAVE_LOOPING 0x04 /* bit 2 = looping enabled-1. */ -#define WAVE_BIDIR_LOOP 0x08 /* bit 3 = Set is bidirectional looping. */ -#define WAVE_LOOP_BACK 0x10 /* bit 4 = Set is looping backward. */ -#define WAVE_SUSTAIN_ON 0x20 /* bit 5 = Turn sustaining on. (Env. pts. 3)*/ -#define WAVE_ENVELOPES 0x40 /* bit 6 = Enable envelopes - 1 */ -#define WAVE_FAST_RELEASE 0x80 /* bit 7 = Shut off immediately after note off */ - /* (use the env_rate/env_offs fields). */ -/* Linux specific bits */ -#define WAVE_VIBRATO 0x00010000 /* The vibrato info is valid */ -#define WAVE_TREMOLO 0x00020000 /* The tremolo info is valid */ -#define WAVE_SCALE 0x00040000 /* The scaling info is valid */ -#define WAVE_FRACTIONS 0x00080000 /* Fraction information is valid */ -/* Reserved bits */ -#define WAVE_ROM 0x40000000 /* For future use */ -#define WAVE_MULAW 0x20000000 /* For future use */ -/* Other bits must be zeroed */ - - int len; /* Size of the wave data in bytes */ - int loop_start, loop_end; /* Byte offsets from the beginning */ - -/* - * The base_freq and base_note fields are used when computing the - * playback speed for a note. The base_note defines the tone frequency - * which is heard if the sample is played using the base_freq as the - * playback speed. - * - * The low_note and high_note fields define the minimum and maximum note - * frequencies for which this sample is valid. It is possible to define - * more than one samples for an instrument number at the same time. The - * low_note and high_note fields are used to select the most suitable one. - * - * The fields base_note, high_note and low_note should contain - * the note frequency multiplied by 1000. For example value for the - * middle A is 440*1000. - */ - - unsigned int base_freq; - unsigned int base_note; - unsigned int high_note; - unsigned int low_note; - int panning; /* -128=left, 127=right */ - int detuning; - -/* New fields introduced in version 1.99.5 */ - - /* Envelope. Enabled by mode bit WAVE_ENVELOPES */ - unsigned char env_rate[ 6 ]; /* GUS HW ramping rate */ - unsigned char env_offset[ 6 ]; /* 255 == 100% */ - - /* - * The tremolo, vibrato and scale info are not supported yet. - * Enable by setting the mode bits WAVE_TREMOLO, WAVE_VIBRATO or - * WAVE_SCALE - */ - - unsigned char tremolo_sweep; - unsigned char tremolo_rate; - unsigned char tremolo_depth; - - unsigned char vibrato_sweep; - unsigned char vibrato_rate; - unsigned char vibrato_depth; - - int scale_frequency; - unsigned int scale_factor; /* from 0 to 2048 or 0 to 2 */ - - int volume; - int fractions; - int reserved1; - int spare[2]; - char data[1]; /* The waveform data starts here */ - }; - -struct sysex_info { - short key; /* Use SYSEX_PATCH or MAUI_PATCH here */ -#define SYSEX_PATCH _PATCHKEY(0x05) -#define MAUI_PATCH _PATCHKEY(0x06) - short device_no; /* Synthesizer number */ - int len; /* Size of the sysex data in bytes */ - unsigned char data[1]; /* Sysex data starts here */ - }; - -/* - * /dev/sequencer input events. - * - * The data written to the /dev/sequencer is a stream of events. Events - * are records of 4 or 8 bytes. The first byte defines the size. - * Any number of events can be written with a write call. There - * is a set of macros for sending these events. Use these macros if you - * want to maximize portability of your program. - * - * Events SEQ_WAIT, SEQ_MIDIPUTC and SEQ_ECHO. Are also input events. - * (All input events are currently 4 bytes long. Be prepared to support - * 8 byte events also. If you receive any event having first byte >= 128, - * it's a 8 byte event. - * - * The events are documented at the end of this file. - * - * Normal events (4 bytes) - * There is also a 8 byte version of most of the 4 byte events. The - * 8 byte one is recommended. - */ -#define SEQ_NOTEOFF 0 -#define SEQ_FMNOTEOFF SEQ_NOTEOFF /* Just old name */ -#define SEQ_NOTEON 1 -#define SEQ_FMNOTEON SEQ_NOTEON -#define SEQ_WAIT TMR_WAIT_ABS -#define SEQ_PGMCHANGE 3 -#define SEQ_FMPGMCHANGE SEQ_PGMCHANGE -#define SEQ_SYNCTIMER TMR_START -#define SEQ_MIDIPUTC 5 -#define SEQ_DRUMON 6 /*** OBSOLETE ***/ -#define SEQ_DRUMOFF 7 /*** OBSOLETE ***/ -#define SEQ_ECHO TMR_ECHO /* For synching programs with output */ -#define SEQ_AFTERTOUCH 9 -#define SEQ_CONTROLLER 10 - -/******************************************* - * Midi controller numbers - ******************************************* - * Controllers 0 to 31 (0x00 to 0x1f) and - * 32 to 63 (0x20 to 0x3f) are continuous - * controllers. - * In the MIDI 1.0 these controllers are sent using - * two messages. Controller numbers 0 to 31 are used - * to send the MSB and the controller numbers 32 to 63 - * are for the LSB. Note that just 7 bits are used in MIDI bytes. - */ - -#define CTL_BANK_SELECT 0x00 -#define CTL_MODWHEEL 0x01 -#define CTL_BREATH 0x02 -/* undefined 0x03 */ -#define CTL_FOOT 0x04 -#define CTL_PORTAMENTO_TIME 0x05 -#define CTL_DATA_ENTRY 0x06 -#define CTL_MAIN_VOLUME 0x07 -#define CTL_BALANCE 0x08 -/* undefined 0x09 */ -#define CTL_PAN 0x0a -#define CTL_EXPRESSION 0x0b -/* undefined 0x0c */ -/* undefined 0x0d */ -/* undefined 0x0e */ -/* undefined 0x0f */ -#define CTL_GENERAL_PURPOSE1 0x10 -#define CTL_GENERAL_PURPOSE2 0x11 -#define CTL_GENERAL_PURPOSE3 0x12 -#define CTL_GENERAL_PURPOSE4 0x13 -/* undefined 0x14 - 0x1f */ - -/* undefined 0x20 */ -/* The controller numbers 0x21 to 0x3f are reserved for the */ -/* least significant bytes of the controllers 0x00 to 0x1f. */ -/* These controllers are not recognised by the driver. */ - -/* Controllers 64 to 69 (0x40 to 0x45) are on/off switches. */ -/* 0=OFF and 127=ON (intermediate values are possible) */ -#define CTL_DAMPER_PEDAL 0x40 -#define CTL_SUSTAIN 0x40 /* Alias */ -#define CTL_HOLD 0x40 /* Alias */ -#define CTL_PORTAMENTO 0x41 -#define CTL_SOSTENUTO 0x42 -#define CTL_SOFT_PEDAL 0x43 -/* undefined 0x44 */ -#define CTL_HOLD2 0x45 -/* undefined 0x46 - 0x4f */ - -#define CTL_GENERAL_PURPOSE5 0x50 -#define CTL_GENERAL_PURPOSE6 0x51 -#define CTL_GENERAL_PURPOSE7 0x52 -#define CTL_GENERAL_PURPOSE8 0x53 -/* undefined 0x54 - 0x5a */ -#define CTL_EXT_EFF_DEPTH 0x5b -#define CTL_TREMOLO_DEPTH 0x5c -#define CTL_CHORUS_DEPTH 0x5d -#define CTL_DETUNE_DEPTH 0x5e -#define CTL_CELESTE_DEPTH 0x5e /* Alias for the above one */ -#define CTL_PHASER_DEPTH 0x5f -#define CTL_DATA_INCREMENT 0x60 -#define CTL_DATA_DECREMENT 0x61 -#define CTL_NONREG_PARM_NUM_LSB 0x62 -#define CTL_NONREG_PARM_NUM_MSB 0x63 -#define CTL_REGIST_PARM_NUM_LSB 0x64 -#define CTL_REGIST_PARM_NUM_MSB 0x65 -/* undefined 0x66 - 0x78 */ -/* reserved 0x79 - 0x7f */ - -/* Pseudo controllers (not midi compatible) */ -#define CTRL_PITCH_BENDER 255 -#define CTRL_PITCH_BENDER_RANGE 254 -#define CTRL_EXPRESSION 253 /* Obsolete */ -#define CTRL_MAIN_VOLUME 252 /* Obsolete */ -#define SEQ_BALANCE 11 -#define SEQ_VOLMODE 12 - -/* - * Volume mode decides how volumes are used - */ - -#define VOL_METHOD_ADAGIO 1 -#define VOL_METHOD_LINEAR 2 - -/* - * Note! SEQ_WAIT, SEQ_MIDIPUTC and SEQ_ECHO are used also as - * input events. - */ - -/* - * Event codes 0xf0 to 0xfc are reserved for future extensions. - */ - -#define SEQ_FULLSIZE 0xfd /* Long events */ -/* - * SEQ_FULLSIZE events are used for loading patches/samples to the - * synthesizer devices. These events are passed directly to the driver - * of the associated synthesizer device. There is no limit to the size - * of the extended events. These events are not queued but executed - * immediately when the write() is called (execution can take several - * seconds of time). - * - * When a SEQ_FULLSIZE message is written to the device, it must - * be written using exactly one write() call. Other events cannot - * be mixed to the same write. - * - * For FM synths (YM3812/OPL3) use struct sbi_instrument and write it to the - * /dev/sequencer. Don't write other data together with the instrument structure - * Set the key field of the structure to FM_PATCH. The device field is used to - * route the patch to the corresponding device. - * - * For wave table use struct patch_info. Initialize the key field - * to WAVE_PATCH. - */ -#define SEQ_PRIVATE 0xfe /* Low level HW dependent events (8 bytes) */ -#define SEQ_EXTENDED 0xff /* Extended events (8 bytes) OBSOLETE */ - -/* - * Record for FM patches - */ - -typedef unsigned char sbi_instr_data[32]; - -struct sbi_instrument { - unsigned short key; /* FM_PATCH or OPL3_PATCH */ -#define FM_PATCH _PATCHKEY(0x01) -#define OPL3_PATCH _PATCHKEY(0x03) - short device; /* Synth# (0-4) */ - int channel; /* Program# to be initialized */ - sbi_instr_data operators; /* Register settings for operator cells (.SBI format) */ - }; - -struct synth_info { /* Read only */ - char name[30]; - int device; /* 0-N. INITIALIZE BEFORE CALLING */ - int synth_type; -#define SYNTH_TYPE_FM 0 -#define SYNTH_TYPE_SAMPLE 1 -#define SYNTH_TYPE_MIDI 2 /* Midi interface */ - - int synth_subtype; -#define FM_TYPE_ADLIB 0x00 -#define FM_TYPE_OPL3 0x01 -#define MIDI_TYPE_MPU401 0x401 - -#define SAMPLE_TYPE_BASIC 0x10 -#define SAMPLE_TYPE_GUS SAMPLE_TYPE_BASIC -#define SAMPLE_TYPE_WAVEFRONT 0x11 - - int perc_mode; /* No longer supported */ - int nr_voices; - int nr_drums; /* Obsolete field */ - int instr_bank_size; - unsigned int capabilities; -#define SYNTH_CAP_PERCMODE 0x00000001 /* No longer used */ -#define SYNTH_CAP_OPL3 0x00000002 /* Set if OPL3 supported */ -#define SYNTH_CAP_INPUT 0x00000004 /* Input (MIDI) device */ - int dummies[19]; /* Reserve space */ - }; - -struct sound_timer_info { - char name[32]; - int caps; - }; - -#define MIDI_CAP_MPU401 1 /* MPU-401 intelligent mode */ - -struct midi_info { - char name[30]; - int device; /* 0-N. INITIALIZE BEFORE CALLING */ - unsigned int capabilities; /* To be defined later */ - int dev_type; - int dummies[18]; /* Reserve space */ - }; - -/******************************************** - * ioctl commands for the /dev/midi## - */ -typedef struct { - unsigned char cmd; - char nr_args, nr_returns; - unsigned char data[30]; - } mpu_command_rec; - -#define SNDCTL_MIDI_PRETIME _SIOWR('m', 0, int) -#define SNDCTL_MIDI_MPUMODE _SIOWR('m', 1, int) -#define SNDCTL_MIDI_MPUCMD _SIOWR('m', 2, mpu_command_rec) - -/******************************************** - * IOCTL commands for /dev/dsp and /dev/audio - */ - -#define SNDCTL_DSP_RESET _SIO ('P', 0) -#define SNDCTL_DSP_SYNC _SIO ('P', 1) -#define SNDCTL_DSP_SPEED _SIOWR('P', 2, int) -#define SNDCTL_DSP_STEREO _SIOWR('P', 3, int) -#define SNDCTL_DSP_GETBLKSIZE _SIOWR('P', 4, int) -#define SNDCTL_DSP_SAMPLESIZE SNDCTL_DSP_SETFMT -#define SNDCTL_DSP_CHANNELS _SIOWR('P', 6, int) -#define SOUND_PCM_WRITE_CHANNELS SNDCTL_DSP_CHANNELS -#define SOUND_PCM_WRITE_FILTER _SIOWR('P', 7, int) -#define SNDCTL_DSP_POST _SIO ('P', 8) -#define SNDCTL_DSP_SUBDIVIDE _SIOWR('P', 9, int) -#define SNDCTL_DSP_SETFRAGMENT _SIOWR('P',10, int) - -/* Audio data formats (Note! U8=8 and S16_LE=16 for compatibility) */ -#define SNDCTL_DSP_GETFMTS _SIOR ('P',11, int) /* Returns a mask */ -#define SNDCTL_DSP_SETFMT _SIOWR('P',5, int) /* Selects ONE fmt*/ -# define AFMT_QUERY 0x00000000 /* Return current fmt */ -# define AFMT_MU_LAW 0x00000001 -# define AFMT_A_LAW 0x00000002 -# define AFMT_IMA_ADPCM 0x00000004 -# define AFMT_U8 0x00000008 -# define AFMT_S16_LE 0x00000010 /* Little endian signed 16*/ -# define AFMT_S16_BE 0x00000020 /* Big endian signed 16 */ -# define AFMT_S8 0x00000040 -# define AFMT_U16_LE 0x00000080 /* Little endian U16 */ -# define AFMT_U16_BE 0x00000100 /* Big endian U16 */ -# define AFMT_MPEG 0x00000200 /* MPEG (2) audio */ -# define AFMT_AC3 0x00000400 /* Dolby Digital AC3 */ - -/* - * Buffer status queries. - */ -typedef struct audio_buf_info { - int fragments; /* # of available fragments (partially usend ones not counted) */ - int fragstotal; /* Total # of fragments allocated */ - int fragsize; /* Size of a fragment in bytes */ - - int bytes; /* Available space in bytes (includes partially used fragments) */ - /* Note! 'bytes' could be more than fragments*fragsize */ - } audio_buf_info; - -#define SNDCTL_DSP_GETOSPACE _SIOR ('P',12, audio_buf_info) -#define SNDCTL_DSP_GETISPACE _SIOR ('P',13, audio_buf_info) -#define SNDCTL_DSP_NONBLOCK _SIO ('P',14) -#define SNDCTL_DSP_GETCAPS _SIOR ('P',15, int) -# define DSP_CAP_REVISION 0x000000ff /* Bits for revision level (0 to 255) */ -# define DSP_CAP_DUPLEX 0x00000100 /* Full duplex record/playback */ -# define DSP_CAP_REALTIME 0x00000200 /* Real time capability */ -# define DSP_CAP_BATCH 0x00000400 /* Device has some kind of */ - /* internal buffers which may */ - /* cause some delays and */ - /* decrease precision of timing */ -# define DSP_CAP_COPROC 0x00000800 /* Has a coprocessor */ - /* Sometimes it's a DSP */ - /* but usually not */ -# define DSP_CAP_TRIGGER 0x00001000 /* Supports SETTRIGGER */ -# define DSP_CAP_MMAP 0x00002000 /* Supports mmap() */ -# define DSP_CAP_MULTI 0x00004000 /* support multiple open */ -# define DSP_CAP_BIND 0x00008000 /* channel binding to front/rear/cneter/lfe */ - - -#define SNDCTL_DSP_GETTRIGGER _SIOR ('P',16, int) -#define SNDCTL_DSP_SETTRIGGER _SIOW ('P',16, int) -# define PCM_ENABLE_INPUT 0x00000001 -# define PCM_ENABLE_OUTPUT 0x00000002 - -typedef struct count_info { - int bytes; /* Total # of bytes processed */ - int blocks; /* # of fragment transitions since last time */ - int ptr; /* Current DMA pointer value */ - } count_info; - -#define SNDCTL_DSP_GETIPTR _SIOR ('P',17, count_info) -#define SNDCTL_DSP_GETOPTR _SIOR ('P',18, count_info) - -typedef struct buffmem_desc { - unsigned *buffer; - int size; - } buffmem_desc; -#define SNDCTL_DSP_MAPINBUF _SIOR ('P', 19, buffmem_desc) -#define SNDCTL_DSP_MAPOUTBUF _SIOR ('P', 20, buffmem_desc) -#define SNDCTL_DSP_SETSYNCRO _SIO ('P', 21) -#define SNDCTL_DSP_SETDUPLEX _SIO ('P', 22) -#define SNDCTL_DSP_GETODELAY _SIOR ('P', 23, int) - -#define SNDCTL_DSP_GETCHANNELMASK _SIOWR('P', 64, int) -#define SNDCTL_DSP_BIND_CHANNEL _SIOWR('P', 65, int) -# define DSP_BIND_QUERY 0x00000000 -# define DSP_BIND_FRONT 0x00000001 -# define DSP_BIND_SURR 0x00000002 -# define DSP_BIND_CENTER_LFE 0x00000004 -# define DSP_BIND_HANDSET 0x00000008 -# define DSP_BIND_MIC 0x00000010 -# define DSP_BIND_MODEM1 0x00000020 -# define DSP_BIND_MODEM2 0x00000040 -# define DSP_BIND_I2S 0x00000080 -# define DSP_BIND_SPDIF 0x00000100 - -#define SNDCTL_DSP_SETSPDIF _SIOW ('P', 66, int) -#define SNDCTL_DSP_GETSPDIF _SIOR ('P', 67, int) -# define SPDIF_PRO 0x0001 -# define SPDIF_N_AUD 0x0002 -# define SPDIF_COPY 0x0004 -# define SPDIF_PRE 0x0008 -# define SPDIF_CC 0x07f0 -# define SPDIF_L 0x0800 -# define SPDIF_DRS 0x4000 -# define SPDIF_V 0x8000 - -/* - * Application's profile defines the way how playback underrun situations should be handled. - * - * APF_NORMAL (the default) and APF_NETWORK make the driver to cleanup the - * playback buffer whenever an underrun occurs. This consumes some time - * prevents looping the existing buffer. - * APF_CPUINTENS is intended to be set by CPU intensive applications which - * are likely to run out of time occasionally. In this mode the buffer cleanup is - * disabled which saves CPU time but also let's the previous buffer content to - * be played during the "pause" after the underrun. - */ -#define SNDCTL_DSP_PROFILE _SIOW ('P', 23, int) -#define APF_NORMAL 0 /* Normal applications */ -#define APF_NETWORK 1 /* Underruns probably caused by an "external" delay */ -#define APF_CPUINTENS 2 /* Underruns probably caused by "overheating" the CPU */ - -#define SOUND_PCM_READ_RATE _SIOR ('P', 2, int) -#define SOUND_PCM_READ_CHANNELS _SIOR ('P', 6, int) -#define SOUND_PCM_READ_BITS _SIOR ('P', 5, int) -#define SOUND_PCM_READ_FILTER _SIOR ('P', 7, int) - -/* Some alias names */ -#define SOUND_PCM_WRITE_BITS SNDCTL_DSP_SETFMT -#define SOUND_PCM_WRITE_RATE SNDCTL_DSP_SPEED -#define SOUND_PCM_POST SNDCTL_DSP_POST -#define SOUND_PCM_RESET SNDCTL_DSP_RESET -#define SOUND_PCM_SYNC SNDCTL_DSP_SYNC -#define SOUND_PCM_SUBDIVIDE SNDCTL_DSP_SUBDIVIDE -#define SOUND_PCM_SETFRAGMENT SNDCTL_DSP_SETFRAGMENT -#define SOUND_PCM_GETFMTS SNDCTL_DSP_GETFMTS -#define SOUND_PCM_SETFMT SNDCTL_DSP_SETFMT -#define SOUND_PCM_GETOSPACE SNDCTL_DSP_GETOSPACE -#define SOUND_PCM_GETISPACE SNDCTL_DSP_GETISPACE -#define SOUND_PCM_NONBLOCK SNDCTL_DSP_NONBLOCK -#define SOUND_PCM_GETCAPS SNDCTL_DSP_GETCAPS -#define SOUND_PCM_GETTRIGGER SNDCTL_DSP_GETTRIGGER -#define SOUND_PCM_SETTRIGGER SNDCTL_DSP_SETTRIGGER -#define SOUND_PCM_SETSYNCRO SNDCTL_DSP_SETSYNCRO -#define SOUND_PCM_GETIPTR SNDCTL_DSP_GETIPTR -#define SOUND_PCM_GETOPTR SNDCTL_DSP_GETOPTR -#define SOUND_PCM_MAPINBUF SNDCTL_DSP_MAPINBUF -#define SOUND_PCM_MAPOUTBUF SNDCTL_DSP_MAPOUTBUF - -/* - * ioctl calls to be used in communication with coprocessors and - * DSP chips. - */ - -typedef struct copr_buffer { - int command; /* Set to 0 if not used */ - int flags; -#define CPF_NONE 0x0000 -#define CPF_FIRST 0x0001 /* First block */ -#define CPF_LAST 0x0002 /* Last block */ - int len; - int offs; /* If required by the device (0 if not used) */ - - unsigned char data[4000]; /* NOTE! 4000 is not 4k */ - } copr_buffer; - -typedef struct copr_debug_buf { - int command; /* Used internally. Set to 0 */ - int parm1; - int parm2; - int flags; - int len; /* Length of data in bytes */ - } copr_debug_buf; - -typedef struct copr_msg { - int len; - unsigned char data[4000]; - } copr_msg; - -#define SNDCTL_COPR_RESET _SIO ('C', 0) -#define SNDCTL_COPR_LOAD _SIOWR('C', 1, copr_buffer) -#define SNDCTL_COPR_RDATA _SIOWR('C', 2, copr_debug_buf) -#define SNDCTL_COPR_RCODE _SIOWR('C', 3, copr_debug_buf) -#define SNDCTL_COPR_WDATA _SIOW ('C', 4, copr_debug_buf) -#define SNDCTL_COPR_WCODE _SIOW ('C', 5, copr_debug_buf) -#define SNDCTL_COPR_RUN _SIOWR('C', 6, copr_debug_buf) -#define SNDCTL_COPR_HALT _SIOWR('C', 7, copr_debug_buf) -#define SNDCTL_COPR_SENDMSG _SIOWR('C', 8, copr_msg) -#define SNDCTL_COPR_RCVMSG _SIOR ('C', 9, copr_msg) - -/********************************************* - * IOCTL commands for /dev/mixer - */ - -/* - * Mixer devices - * - * There can be up to 20 different analog mixer channels. The - * SOUND_MIXER_NRDEVICES gives the currently supported maximum. - * The SOUND_MIXER_READ_DEVMASK returns a bitmask which tells - * the devices supported by the particular mixer. - */ - -#define SOUND_MIXER_NRDEVICES 25 -#define SOUND_MIXER_VOLUME 0 -#define SOUND_MIXER_BASS 1 -#define SOUND_MIXER_TREBLE 2 -#define SOUND_MIXER_SYNTH 3 -#define SOUND_MIXER_PCM 4 -#define SOUND_MIXER_SPEAKER 5 -#define SOUND_MIXER_LINE 6 -#define SOUND_MIXER_MIC 7 -#define SOUND_MIXER_CD 8 -#define SOUND_MIXER_IMIX 9 /* Recording monitor */ -#define SOUND_MIXER_ALTPCM 10 -#define SOUND_MIXER_RECLEV 11 /* Recording level */ -#define SOUND_MIXER_IGAIN 12 /* Input gain */ -#define SOUND_MIXER_OGAIN 13 /* Output gain */ -/* - * The AD1848 codec and compatibles have three line level inputs - * (line, aux1 and aux2). Since each card manufacturer have assigned - * different meanings to these inputs, it's inpractical to assign - * specific meanings (line, cd, synth etc.) to them. - */ -#define SOUND_MIXER_LINE1 14 /* Input source 1 (aux1) */ -#define SOUND_MIXER_LINE2 15 /* Input source 2 (aux2) */ -#define SOUND_MIXER_LINE3 16 /* Input source 3 (line) */ -#define SOUND_MIXER_DIGITAL1 17 /* Digital (input) 1 */ -#define SOUND_MIXER_DIGITAL2 18 /* Digital (input) 2 */ -#define SOUND_MIXER_DIGITAL3 19 /* Digital (input) 3 */ -#define SOUND_MIXER_PHONEIN 20 /* Phone input */ -#define SOUND_MIXER_PHONEOUT 21 /* Phone output */ -#define SOUND_MIXER_VIDEO 22 /* Video/TV (audio) in */ -#define SOUND_MIXER_RADIO 23 /* Radio in */ -#define SOUND_MIXER_MONITOR 24 /* Monitor (usually mic) volume */ - -/* Some on/off settings (SOUND_SPECIAL_MIN - SOUND_SPECIAL_MAX) */ -/* Not counted to SOUND_MIXER_NRDEVICES, but use the same number space */ -#define SOUND_ONOFF_MIN 28 -#define SOUND_ONOFF_MAX 30 - -/* Note! Number 31 cannot be used since the sign bit is reserved */ -#define SOUND_MIXER_NONE 31 - -/* - * The following unsupported macros are no longer functional. - * Use SOUND_MIXER_PRIVATE# macros in future. - */ -#define SOUND_MIXER_ENHANCE SOUND_MIXER_NONE -#define SOUND_MIXER_MUTE SOUND_MIXER_NONE -#define SOUND_MIXER_LOUD SOUND_MIXER_NONE - - -#define SOUND_DEVICE_LABELS {"Vol ", "Bass ", "Trebl", "Synth", "Pcm ", "Spkr ", "Line ", \ - "Mic ", "CD ", "Mix ", "Pcm2 ", "Rec ", "IGain", "OGain", \ - "Line1", "Line2", "Line3", "Digital1", "Digital2", "Digital3", \ - "PhoneIn", "PhoneOut", "Video", "Radio", "Monitor"} - -#define SOUND_DEVICE_NAMES {"vol", "bass", "treble", "synth", "pcm", "speaker", "line", \ - "mic", "cd", "mix", "pcm2", "rec", "igain", "ogain", \ - "line1", "line2", "line3", "dig1", "dig2", "dig3", \ - "phin", "phout", "video", "radio", "monitor"} - -/* Device bitmask identifiers */ - -#define SOUND_MIXER_RECSRC 0xff /* Arg contains a bit for each recording source */ -#define SOUND_MIXER_DEVMASK 0xfe /* Arg contains a bit for each supported device */ -#define SOUND_MIXER_RECMASK 0xfd /* Arg contains a bit for each supported recording source */ -#define SOUND_MIXER_CAPS 0xfc -# define SOUND_CAP_EXCL_INPUT 0x00000001 /* Only one recording source at a time */ -#define SOUND_MIXER_STEREODEVS 0xfb /* Mixer channels supporting stereo */ -#define SOUND_MIXER_OUTSRC 0xfa /* Arg contains a bit for each input source to output */ -#define SOUND_MIXER_OUTMASK 0xf9 /* Arg contains a bit for each supported input source to output */ - -/* Device mask bits */ - -#define SOUND_MASK_VOLUME (1 << SOUND_MIXER_VOLUME) -#define SOUND_MASK_BASS (1 << SOUND_MIXER_BASS) -#define SOUND_MASK_TREBLE (1 << SOUND_MIXER_TREBLE) -#define SOUND_MASK_SYNTH (1 << SOUND_MIXER_SYNTH) -#define SOUND_MASK_PCM (1 << SOUND_MIXER_PCM) -#define SOUND_MASK_SPEAKER (1 << SOUND_MIXER_SPEAKER) -#define SOUND_MASK_LINE (1 << SOUND_MIXER_LINE) -#define SOUND_MASK_MIC (1 << SOUND_MIXER_MIC) -#define SOUND_MASK_CD (1 << SOUND_MIXER_CD) -#define SOUND_MASK_IMIX (1 << SOUND_MIXER_IMIX) -#define SOUND_MASK_ALTPCM (1 << SOUND_MIXER_ALTPCM) -#define SOUND_MASK_RECLEV (1 << SOUND_MIXER_RECLEV) -#define SOUND_MASK_IGAIN (1 << SOUND_MIXER_IGAIN) -#define SOUND_MASK_OGAIN (1 << SOUND_MIXER_OGAIN) -#define SOUND_MASK_LINE1 (1 << SOUND_MIXER_LINE1) -#define SOUND_MASK_LINE2 (1 << SOUND_MIXER_LINE2) -#define SOUND_MASK_LINE3 (1 << SOUND_MIXER_LINE3) -#define SOUND_MASK_DIGITAL1 (1 << SOUND_MIXER_DIGITAL1) -#define SOUND_MASK_DIGITAL2 (1 << SOUND_MIXER_DIGITAL2) -#define SOUND_MASK_DIGITAL3 (1 << SOUND_MIXER_DIGITAL3) -#define SOUND_MASK_PHONEIN (1 << SOUND_MIXER_PHONEIN) -#define SOUND_MASK_PHONEOUT (1 << SOUND_MIXER_PHONEOUT) -#define SOUND_MASK_RADIO (1 << SOUND_MIXER_RADIO) -#define SOUND_MASK_VIDEO (1 << SOUND_MIXER_VIDEO) -#define SOUND_MASK_MONITOR (1 << SOUND_MIXER_MONITOR) - -/* Obsolete macros */ -#define SOUND_MASK_MUTE (1 << SOUND_MIXER_MUTE) -#define SOUND_MASK_ENHANCE (1 << SOUND_MIXER_ENHANCE) -#define SOUND_MASK_LOUD (1 << SOUND_MIXER_LOUD) - -#define MIXER_READ(dev) _SIOR('M', dev, int) -#define SOUND_MIXER_READ_VOLUME MIXER_READ(SOUND_MIXER_VOLUME) -#define SOUND_MIXER_READ_BASS MIXER_READ(SOUND_MIXER_BASS) -#define SOUND_MIXER_READ_TREBLE MIXER_READ(SOUND_MIXER_TREBLE) -#define SOUND_MIXER_READ_SYNTH MIXER_READ(SOUND_MIXER_SYNTH) -#define SOUND_MIXER_READ_PCM MIXER_READ(SOUND_MIXER_PCM) -#define SOUND_MIXER_READ_SPEAKER MIXER_READ(SOUND_MIXER_SPEAKER) -#define SOUND_MIXER_READ_LINE MIXER_READ(SOUND_MIXER_LINE) -#define SOUND_MIXER_READ_MIC MIXER_READ(SOUND_MIXER_MIC) -#define SOUND_MIXER_READ_CD MIXER_READ(SOUND_MIXER_CD) -#define SOUND_MIXER_READ_IMIX MIXER_READ(SOUND_MIXER_IMIX) -#define SOUND_MIXER_READ_ALTPCM MIXER_READ(SOUND_MIXER_ALTPCM) -#define SOUND_MIXER_READ_RECLEV MIXER_READ(SOUND_MIXER_RECLEV) -#define SOUND_MIXER_READ_IGAIN MIXER_READ(SOUND_MIXER_IGAIN) -#define SOUND_MIXER_READ_OGAIN MIXER_READ(SOUND_MIXER_OGAIN) -#define SOUND_MIXER_READ_LINE1 MIXER_READ(SOUND_MIXER_LINE1) -#define SOUND_MIXER_READ_LINE2 MIXER_READ(SOUND_MIXER_LINE2) -#define SOUND_MIXER_READ_LINE3 MIXER_READ(SOUND_MIXER_LINE3) - -/* Obsolete macros */ -#define SOUND_MIXER_READ_MUTE MIXER_READ(SOUND_MIXER_MUTE) -#define SOUND_MIXER_READ_ENHANCE MIXER_READ(SOUND_MIXER_ENHANCE) -#define SOUND_MIXER_READ_LOUD MIXER_READ(SOUND_MIXER_LOUD) - -#define SOUND_MIXER_READ_RECSRC MIXER_READ(SOUND_MIXER_RECSRC) -#define SOUND_MIXER_READ_DEVMASK MIXER_READ(SOUND_MIXER_DEVMASK) -#define SOUND_MIXER_READ_RECMASK MIXER_READ(SOUND_MIXER_RECMASK) -#define SOUND_MIXER_READ_STEREODEVS MIXER_READ(SOUND_MIXER_STEREODEVS) -#define SOUND_MIXER_READ_CAPS MIXER_READ(SOUND_MIXER_CAPS) - -#define MIXER_WRITE(dev) _SIOWR('M', dev, int) -#define SOUND_MIXER_WRITE_VOLUME MIXER_WRITE(SOUND_MIXER_VOLUME) -#define SOUND_MIXER_WRITE_BASS MIXER_WRITE(SOUND_MIXER_BASS) -#define SOUND_MIXER_WRITE_TREBLE MIXER_WRITE(SOUND_MIXER_TREBLE) -#define SOUND_MIXER_WRITE_SYNTH MIXER_WRITE(SOUND_MIXER_SYNTH) -#define SOUND_MIXER_WRITE_PCM MIXER_WRITE(SOUND_MIXER_PCM) -#define SOUND_MIXER_WRITE_SPEAKER MIXER_WRITE(SOUND_MIXER_SPEAKER) -#define SOUND_MIXER_WRITE_LINE MIXER_WRITE(SOUND_MIXER_LINE) -#define SOUND_MIXER_WRITE_MIC MIXER_WRITE(SOUND_MIXER_MIC) -#define SOUND_MIXER_WRITE_CD MIXER_WRITE(SOUND_MIXER_CD) -#define SOUND_MIXER_WRITE_IMIX MIXER_WRITE(SOUND_MIXER_IMIX) -#define SOUND_MIXER_WRITE_ALTPCM MIXER_WRITE(SOUND_MIXER_ALTPCM) -#define SOUND_MIXER_WRITE_RECLEV MIXER_WRITE(SOUND_MIXER_RECLEV) -#define SOUND_MIXER_WRITE_IGAIN MIXER_WRITE(SOUND_MIXER_IGAIN) -#define SOUND_MIXER_WRITE_OGAIN MIXER_WRITE(SOUND_MIXER_OGAIN) -#define SOUND_MIXER_WRITE_LINE1 MIXER_WRITE(SOUND_MIXER_LINE1) -#define SOUND_MIXER_WRITE_LINE2 MIXER_WRITE(SOUND_MIXER_LINE2) -#define SOUND_MIXER_WRITE_LINE3 MIXER_WRITE(SOUND_MIXER_LINE3) - -/* Obsolete macros */ -#define SOUND_MIXER_WRITE_MUTE MIXER_WRITE(SOUND_MIXER_MUTE) -#define SOUND_MIXER_WRITE_ENHANCE MIXER_WRITE(SOUND_MIXER_ENHANCE) -#define SOUND_MIXER_WRITE_LOUD MIXER_WRITE(SOUND_MIXER_LOUD) - -#define SOUND_MIXER_WRITE_RECSRC MIXER_WRITE(SOUND_MIXER_RECSRC) - -typedef struct mixer_info -{ - char id[16]; - char name[32]; - int modify_counter; - int fillers[10]; -} mixer_info; - -typedef struct _old_mixer_info /* Obsolete */ -{ - char id[16]; - char name[32]; -} _old_mixer_info; - -#define SOUND_MIXER_INFO _SIOR ('M', 101, mixer_info) -#define SOUND_OLD_MIXER_INFO _SIOR ('M', 101, _old_mixer_info) - -/* - * A mechanism for accessing "proprietary" mixer features. This method - * permits passing 128 bytes of arbitrary data between a mixer application - * and the mixer driver. Interpretation of the record is defined by - * the particular mixer driver. - */ -typedef unsigned char mixer_record[128]; - -#define SOUND_MIXER_ACCESS _SIOWR('M', 102, mixer_record) - -/* - * Two ioctls for special souncard function - */ -#define SOUND_MIXER_AGC _SIOWR('M', 103, int) -#define SOUND_MIXER_3DSE _SIOWR('M', 104, int) - -/* - * The SOUND_MIXER_PRIVATE# commands can be redefined by low level drivers. - * These features can be used when accessing device specific features. - */ -#define SOUND_MIXER_PRIVATE1 _SIOWR('M', 111, int) -#define SOUND_MIXER_PRIVATE2 _SIOWR('M', 112, int) -#define SOUND_MIXER_PRIVATE3 _SIOWR('M', 113, int) -#define SOUND_MIXER_PRIVATE4 _SIOWR('M', 114, int) -#define SOUND_MIXER_PRIVATE5 _SIOWR('M', 115, int) - -/* - * SOUND_MIXER_GETLEVELS and SOUND_MIXER_SETLEVELS calls can be used - * for querying current mixer settings from the driver and for loading - * default volume settings _prior_ activating the mixer (loading - * doesn't affect current state of the mixer hardware). These calls - * are for internal use only. - */ - -typedef struct mixer_vol_table { - int num; /* Index to volume table */ - char name[32]; - int levels[32]; -} mixer_vol_table; - -#define SOUND_MIXER_GETLEVELS _SIOWR('M', 116, mixer_vol_table) -#define SOUND_MIXER_SETLEVELS _SIOWR('M', 117, mixer_vol_table) - -/* - * An ioctl for identifying the driver version. It will return value - * of the SOUND_VERSION macro used when compiling the driver. - * This call was introduced in OSS version 3.6 and it will not work - * with earlier versions (returns EINVAL). - */ -#define OSS_GETVERSION _SIOR ('M', 118, int) - -/* - * Level 2 event types for /dev/sequencer - */ - -/* - * The 4 most significant bits of byte 0 specify the class of - * the event: - * - * 0x8X = system level events, - * 0x9X = device/port specific events, event[1] = device/port, - * The last 4 bits give the subtype: - * 0x02 = Channel event (event[3] = chn). - * 0x01 = note event (event[4] = note). - * (0x01 is not used alone but always with bit 0x02). - * event[2] = MIDI message code (0x80=note off etc.) - * - */ - -#define EV_SEQ_LOCAL 0x80 -#define EV_TIMING 0x81 -#define EV_CHN_COMMON 0x92 -#define EV_CHN_VOICE 0x93 -#define EV_SYSEX 0x94 -/* - * Event types 200 to 220 are reserved for application use. - * These numbers will not be used by the driver. - */ - -/* - * Events for event type EV_CHN_VOICE - */ - -#define MIDI_NOTEOFF 0x80 -#define MIDI_NOTEON 0x90 -#define MIDI_KEY_PRESSURE 0xA0 - -/* - * Events for event type EV_CHN_COMMON - */ - -#define MIDI_CTL_CHANGE 0xB0 -#define MIDI_PGM_CHANGE 0xC0 -#define MIDI_CHN_PRESSURE 0xD0 -#define MIDI_PITCH_BEND 0xE0 - -#define MIDI_SYSTEM_PREFIX 0xF0 - -/* - * Timer event types - */ -#define TMR_WAIT_REL 1 /* Time relative to the prev time */ -#define TMR_WAIT_ABS 2 /* Absolute time since TMR_START */ -#define TMR_STOP 3 -#define TMR_START 4 -#define TMR_CONTINUE 5 -#define TMR_TEMPO 6 -#define TMR_ECHO 8 -#define TMR_CLOCK 9 /* MIDI clock */ -#define TMR_SPP 10 /* Song position pointer */ -#define TMR_TIMESIG 11 /* Time signature */ - -/* - * Local event types - */ -#define LOCL_STARTAUDIO 1 - -#if !defined(__KERNEL__) || defined(USE_SEQ_MACROS) -/* - * Some convenience macros to simplify programming of the - * /dev/sequencer interface - * - * This is a legacy interface for applications written against - * the OSSlib-3.8 style interface. It is no longer possible - * to actually link against OSSlib with this header, but we - * still provide these macros for programs using them. - * - * If you want to use OSSlib, it is recommended that you get - * the GPL version of OSS-4.x and build against that version - * of the header. - * - * We redefine the extern keyword so that make headers_check - * does not complain about SEQ_USE_EXTBUF. - */ -#define SEQ_DECLAREBUF() SEQ_USE_EXTBUF() - -void seqbuf_dump(void); /* This function must be provided by programs */ - -#define SEQ_PM_DEFINES int __foo_bar___ - -#define SEQ_LOAD_GMINSTR(dev, instr) -#define SEQ_LOAD_GMDRUM(dev, drum) - -#define _SEQ_EXTERN extern -#define SEQ_USE_EXTBUF() \ - _SEQ_EXTERN unsigned char _seqbuf[]; \ - _SEQ_EXTERN int _seqbuflen; _SEQ_EXTERN int _seqbufptr - -#ifndef USE_SIMPLE_MACROS -/* Sample seqbuf_dump() implementation: - * - * SEQ_DEFINEBUF (2048); -- Defines a buffer for 2048 bytes - * - * int seqfd; -- The file descriptor for /dev/sequencer. - * - * void - * seqbuf_dump () - * { - * if (_seqbufptr) - * if (write (seqfd, _seqbuf, _seqbufptr) == -1) - * { - * perror ("write /dev/sequencer"); - * exit (-1); - * } - * _seqbufptr = 0; - * } - */ - -#define SEQ_DEFINEBUF(len) unsigned char _seqbuf[len]; int _seqbuflen = len;int _seqbufptr = 0 -#define _SEQ_NEEDBUF(len) if ((_seqbufptr+(len)) > _seqbuflen) seqbuf_dump() -#define _SEQ_ADVBUF(len) _seqbufptr += len -#define SEQ_DUMPBUF seqbuf_dump -#else -/* - * This variation of the sequencer macros is used just to format one event - * using fixed buffer. - * - * The program using the macro library must define the following macros before - * using this library. - * - * #define _seqbuf name of the buffer (unsigned char[]) - * #define _SEQ_ADVBUF(len) If the applic needs to know the exact - * size of the event, this macro can be used. - * Otherwise this must be defined as empty. - * #define _seqbufptr Define the name of index variable or 0 if - * not required. - */ -#define _SEQ_NEEDBUF(len) /* empty */ -#endif - -#define SEQ_VOLUME_MODE(dev, mode) {_SEQ_NEEDBUF(8);\ - _seqbuf[_seqbufptr] = SEQ_EXTENDED;\ - _seqbuf[_seqbufptr+1] = SEQ_VOLMODE;\ - _seqbuf[_seqbufptr+2] = (dev);\ - _seqbuf[_seqbufptr+3] = (mode);\ - _seqbuf[_seqbufptr+4] = 0;\ - _seqbuf[_seqbufptr+5] = 0;\ - _seqbuf[_seqbufptr+6] = 0;\ - _seqbuf[_seqbufptr+7] = 0;\ - _SEQ_ADVBUF(8);} - -/* - * Midi voice messages - */ - -#define _CHN_VOICE(dev, event, chn, note, parm) \ - {_SEQ_NEEDBUF(8);\ - _seqbuf[_seqbufptr] = EV_CHN_VOICE;\ - _seqbuf[_seqbufptr+1] = (dev);\ - _seqbuf[_seqbufptr+2] = (event);\ - _seqbuf[_seqbufptr+3] = (chn);\ - _seqbuf[_seqbufptr+4] = (note);\ - _seqbuf[_seqbufptr+5] = (parm);\ - _seqbuf[_seqbufptr+6] = (0);\ - _seqbuf[_seqbufptr+7] = 0;\ - _SEQ_ADVBUF(8);} - -#define SEQ_START_NOTE(dev, chn, note, vol) \ - _CHN_VOICE(dev, MIDI_NOTEON, chn, note, vol) - -#define SEQ_STOP_NOTE(dev, chn, note, vol) \ - _CHN_VOICE(dev, MIDI_NOTEOFF, chn, note, vol) - -#define SEQ_KEY_PRESSURE(dev, chn, note, pressure) \ - _CHN_VOICE(dev, MIDI_KEY_PRESSURE, chn, note, pressure) - -/* - * Midi channel messages - */ - -#define _CHN_COMMON(dev, event, chn, p1, p2, w14) \ - {_SEQ_NEEDBUF(8);\ - _seqbuf[_seqbufptr] = EV_CHN_COMMON;\ - _seqbuf[_seqbufptr+1] = (dev);\ - _seqbuf[_seqbufptr+2] = (event);\ - _seqbuf[_seqbufptr+3] = (chn);\ - _seqbuf[_seqbufptr+4] = (p1);\ - _seqbuf[_seqbufptr+5] = (p2);\ - *(short *)&_seqbuf[_seqbufptr+6] = (w14);\ - _SEQ_ADVBUF(8);} -/* - * SEQ_SYSEX permits sending of sysex messages. (It may look that it permits - * sending any MIDI bytes but it's absolutely not possible. Trying to do - * so _will_ cause problems with MPU401 intelligent mode). - * - * Sysex messages are sent in blocks of 1 to 6 bytes. Longer messages must be - * sent by calling SEQ_SYSEX() several times (there must be no other events - * between them). First sysex fragment must have 0xf0 in the first byte - * and the last byte (buf[len-1] of the last fragment must be 0xf7. No byte - * between these sysex start and end markers cannot be larger than 0x7f. Also - * lengths of each fragments (except the last one) must be 6. - * - * Breaking the above rules may work with some MIDI ports but is likely to - * cause fatal problems with some other devices (such as MPU401). - */ -#define SEQ_SYSEX(dev, buf, len) \ - {int ii, ll=(len); \ - unsigned char *bufp=buf;\ - if (ll>6)ll=6;\ - _SEQ_NEEDBUF(8);\ - _seqbuf[_seqbufptr] = EV_SYSEX;\ - _seqbuf[_seqbufptr+1] = (dev);\ - for(ii=0;ii<ll;ii++)\ - _seqbuf[_seqbufptr+ii+2] = bufp[ii];\ - for(ii=ll;ii<6;ii++)\ - _seqbuf[_seqbufptr+ii+2] = 0xff;\ - _SEQ_ADVBUF(8);} - -#define SEQ_CHN_PRESSURE(dev, chn, pressure) \ - _CHN_COMMON(dev, MIDI_CHN_PRESSURE, chn, pressure, 0, 0) - -#define SEQ_SET_PATCH SEQ_PGM_CHANGE -#define SEQ_PGM_CHANGE(dev, chn, patch) \ - _CHN_COMMON(dev, MIDI_PGM_CHANGE, chn, patch, 0, 0) - -#define SEQ_CONTROL(dev, chn, controller, value) \ - _CHN_COMMON(dev, MIDI_CTL_CHANGE, chn, controller, 0, value) - -#define SEQ_BENDER(dev, chn, value) \ - _CHN_COMMON(dev, MIDI_PITCH_BEND, chn, 0, 0, value) - - -#define SEQ_V2_X_CONTROL(dev, voice, controller, value) {_SEQ_NEEDBUF(8);\ - _seqbuf[_seqbufptr] = SEQ_EXTENDED;\ - _seqbuf[_seqbufptr+1] = SEQ_CONTROLLER;\ - _seqbuf[_seqbufptr+2] = (dev);\ - _seqbuf[_seqbufptr+3] = (voice);\ - _seqbuf[_seqbufptr+4] = (controller);\ - _seqbuf[_seqbufptr+5] = ((value)&0xff);\ - _seqbuf[_seqbufptr+6] = ((value>>8)&0xff);\ - _seqbuf[_seqbufptr+7] = 0;\ - _SEQ_ADVBUF(8);} -/* - * The following 5 macros are incorrectly implemented and obsolete. - * Use SEQ_BENDER and SEQ_CONTROL (with proper controller) instead. - */ -#define SEQ_PITCHBEND(dev, voice, value) SEQ_V2_X_CONTROL(dev, voice, CTRL_PITCH_BENDER, value) -#define SEQ_BENDER_RANGE(dev, voice, value) SEQ_V2_X_CONTROL(dev, voice, CTRL_PITCH_BENDER_RANGE, value) -#define SEQ_EXPRESSION(dev, voice, value) SEQ_CONTROL(dev, voice, CTL_EXPRESSION, value*128) -#define SEQ_MAIN_VOLUME(dev, voice, value) SEQ_CONTROL(dev, voice, CTL_MAIN_VOLUME, (value*16383)/100) -#define SEQ_PANNING(dev, voice, pos) SEQ_CONTROL(dev, voice, CTL_PAN, (pos+128) / 2) - -/* - * Timing and synchronization macros - */ - -#define _TIMER_EVENT(ev, parm) {_SEQ_NEEDBUF(8);\ - _seqbuf[_seqbufptr+0] = EV_TIMING; \ - _seqbuf[_seqbufptr+1] = (ev); \ - _seqbuf[_seqbufptr+2] = 0;\ - _seqbuf[_seqbufptr+3] = 0;\ - *(unsigned int *)&_seqbuf[_seqbufptr+4] = (parm); \ - _SEQ_ADVBUF(8);} - -#define SEQ_START_TIMER() _TIMER_EVENT(TMR_START, 0) -#define SEQ_STOP_TIMER() _TIMER_EVENT(TMR_STOP, 0) -#define SEQ_CONTINUE_TIMER() _TIMER_EVENT(TMR_CONTINUE, 0) -#define SEQ_WAIT_TIME(ticks) _TIMER_EVENT(TMR_WAIT_ABS, ticks) -#define SEQ_DELTA_TIME(ticks) _TIMER_EVENT(TMR_WAIT_REL, ticks) -#define SEQ_ECHO_BACK(key) _TIMER_EVENT(TMR_ECHO, key) -#define SEQ_SET_TEMPO(value) _TIMER_EVENT(TMR_TEMPO, value) -#define SEQ_SONGPOS(pos) _TIMER_EVENT(TMR_SPP, pos) -#define SEQ_TIME_SIGNATURE(sig) _TIMER_EVENT(TMR_TIMESIG, sig) - -/* - * Local control events - */ - -#define _LOCAL_EVENT(ev, parm) {_SEQ_NEEDBUF(8);\ - _seqbuf[_seqbufptr+0] = EV_SEQ_LOCAL; \ - _seqbuf[_seqbufptr+1] = (ev); \ - _seqbuf[_seqbufptr+2] = 0;\ - _seqbuf[_seqbufptr+3] = 0;\ - *(unsigned int *)&_seqbuf[_seqbufptr+4] = (parm); \ - _SEQ_ADVBUF(8);} - -#define SEQ_PLAYAUDIO(devmask) _LOCAL_EVENT(LOCL_STARTAUDIO, devmask) -/* - * Events for the level 1 interface only - */ - -#define SEQ_MIDIOUT(device, byte) {_SEQ_NEEDBUF(4);\ - _seqbuf[_seqbufptr] = SEQ_MIDIPUTC;\ - _seqbuf[_seqbufptr+1] = (byte);\ - _seqbuf[_seqbufptr+2] = (device);\ - _seqbuf[_seqbufptr+3] = 0;\ - _SEQ_ADVBUF(4);} - -/* - * Patch loading. - */ -#define SEQ_WRPATCH(patchx, len) \ - {if (_seqbufptr) SEQ_DUMPBUF();\ - if (write(seqfd, (char*)(patchx), len)==-1) \ - perror("Write patch: /dev/sequencer");} -#define SEQ_WRPATCH2(patchx, len) \ - (SEQ_DUMPBUF(), write(seqfd, (char*)(patchx), len)) - -#endif #endif diff --git a/include/linux/spi/Kbuild b/include/linux/spi/Kbuild index d375a082986..e69de29bb2d 100644 --- a/include/linux/spi/Kbuild +++ b/include/linux/spi/Kbuild @@ -1 +0,0 @@ -header-y += spidev.h diff --git a/include/linux/stat.h b/include/linux/stat.h index 46132409a3f..075cb0c7eb2 100644 --- a/include/linux/stat.h +++ b/include/linux/stat.h @@ -1,52 +1,10 @@ #ifndef _LINUX_STAT_H #define _LINUX_STAT_H -#ifdef __KERNEL__ #include <asm/stat.h> +#include <uapi/linux/stat.h> -#endif - -#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) - -#define S_IFMT 00170000 -#define S_IFSOCK 0140000 -#define S_IFLNK 0120000 -#define S_IFREG 0100000 -#define S_IFBLK 0060000 -#define S_IFDIR 0040000 -#define S_IFCHR 0020000 -#define S_IFIFO 0010000 -#define S_ISUID 0004000 -#define S_ISGID 0002000 -#define S_ISVTX 0001000 - -#define S_ISLNK(m) (((m) & S_IFMT) == S_IFLNK) -#define S_ISREG(m) (((m) & S_IFMT) == S_IFREG) -#define S_ISDIR(m) (((m) & S_IFMT) == S_IFDIR) -#define S_ISCHR(m) (((m) & S_IFMT) == S_IFCHR) -#define S_ISBLK(m) (((m) & S_IFMT) == S_IFBLK) -#define S_ISFIFO(m) (((m) & S_IFMT) == S_IFIFO) -#define S_ISSOCK(m) (((m) & S_IFMT) == S_IFSOCK) - -#define S_IRWXU 00700 -#define S_IRUSR 00400 -#define S_IWUSR 00200 -#define S_IXUSR 00100 - -#define S_IRWXG 00070 -#define S_IRGRP 00040 -#define S_IWGRP 00020 -#define S_IXGRP 00010 - -#define S_IRWXO 00007 -#define S_IROTH 00004 -#define S_IWOTH 00002 -#define S_IXOTH 00001 - -#endif - -#ifdef __KERNEL__ #define S_IRWXUGO (S_IRWXU|S_IRWXG|S_IRWXO) #define S_IALLUGO (S_ISUID|S_ISGID|S_ISVTX|S_IRWXUGO) #define S_IRUGO (S_IRUSR|S_IRGRP|S_IROTH) @@ -77,5 +35,3 @@ struct kstat { }; #endif - -#endif diff --git a/include/linux/stddef.h b/include/linux/stddef.h index 1747b6787b9..f4aec0e75c3 100644 --- a/include/linux/stddef.h +++ b/include/linux/stddef.h @@ -1,9 +1,8 @@ #ifndef _LINUX_STDDEF_H #define _LINUX_STDDEF_H -#include <linux/compiler.h> +#include <uapi/linux/stddef.h> -#ifdef __KERNEL__ #undef NULL #define NULL ((void *)0) @@ -19,6 +18,4 @@ enum { #else #define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER) #endif -#endif /* __KERNEL__ */ - #endif diff --git a/include/linux/string.h b/include/linux/string.h index b9178812d9d..630125818ca 100644 --- a/include/linux/string.h +++ b/include/linux/string.h @@ -1,16 +1,12 @@ #ifndef _LINUX_STRING_H_ #define _LINUX_STRING_H_ -/* We don't want strings.h stuff being used by user stuff by accident */ - -#ifndef __KERNEL__ -#include <string.h> -#else #include <linux/compiler.h> /* for inline */ #include <linux/types.h> /* for size_t */ #include <linux/stddef.h> /* for NULL */ #include <stdarg.h> +#include <uapi/linux/string.h> extern char *strndup_user(const char __user *, long); extern void *memdup_user(const void __user *, size_t); @@ -147,5 +143,4 @@ static inline bool strstarts(const char *str, const char *prefix) extern size_t memweight(const void *ptr, size_t bytes); -#endif /* __KERNEL__ */ #endif /* _LINUX_STRING_H_ */ diff --git a/include/linux/sunrpc/Kbuild b/include/linux/sunrpc/Kbuild index 98df21164a8..e69de29bb2d 100644 --- a/include/linux/sunrpc/Kbuild +++ b/include/linux/sunrpc/Kbuild @@ -1 +0,0 @@ -header-y += debug.h diff --git a/include/linux/sunrpc/debug.h b/include/linux/sunrpc/debug.h index a76cc20d98c..9385bd74c86 100644 --- a/include/linux/sunrpc/debug.h +++ b/include/linux/sunrpc/debug.h @@ -5,28 +5,11 @@ * * Copyright (C) 1996, Olaf Kirch <okir@monad.swb.de> */ - #ifndef _LINUX_SUNRPC_DEBUG_H_ #define _LINUX_SUNRPC_DEBUG_H_ -/* - * RPC debug facilities - */ -#define RPCDBG_XPRT 0x0001 -#define RPCDBG_CALL 0x0002 -#define RPCDBG_DEBUG 0x0004 -#define RPCDBG_NFS 0x0008 -#define RPCDBG_AUTH 0x0010 -#define RPCDBG_BIND 0x0020 -#define RPCDBG_SCHED 0x0040 -#define RPCDBG_TRANS 0x0080 -#define RPCDBG_SVCXPRT 0x0100 -#define RPCDBG_SVCDSP 0x0200 -#define RPCDBG_MISC 0x0400 -#define RPCDBG_CACHE 0x0800 -#define RPCDBG_ALL 0x7fff +#include <uapi/linux/sunrpc/debug.h> -#ifdef __KERNEL__ /* * Enable RPC debugging/profiling. @@ -87,24 +70,4 @@ void rpc_register_sysctl(void); void rpc_unregister_sysctl(void); #endif -#endif /* __KERNEL__ */ - -/* - * Declarations for the sysctl debug interface, which allows to read or - * change the debug flags for rpc, nfs, nfsd, and lockd. Since the sunrpc - * module currently registers its sysctl table dynamically, the sysctl path - * for module FOO is <CTL_SUNRPC, CTL_FOODEBUG>. - */ - -enum { - CTL_RPCDEBUG = 1, - CTL_NFSDEBUG, - CTL_NFSDDEBUG, - CTL_NLMDEBUG, - CTL_SLOTTABLE_UDP, - CTL_SLOTTABLE_TCP, - CTL_MIN_RESVPORT, - CTL_MAX_RESVPORT, -}; - #endif /* _LINUX_SUNRPC_DEBUG_H_ */ diff --git a/include/linux/sunrpc/svc_xprt.h b/include/linux/sunrpc/svc_xprt.h index b3f64b12f14..b05963f09eb 100644 --- a/include/linux/sunrpc/svc_xprt.h +++ b/include/linux/sunrpc/svc_xprt.h @@ -114,7 +114,6 @@ void svc_xprt_init(struct net *, struct svc_xprt_class *, struct svc_xprt *, int svc_create_xprt(struct svc_serv *, const char *, struct net *, const int, const unsigned short, int); void svc_xprt_enqueue(struct svc_xprt *xprt); -void svc_xprt_received(struct svc_xprt *); void svc_xprt_put(struct svc_xprt *xprt); void svc_xprt_copy_addrs(struct svc_rqst *rqstp, struct svc_xprt *xprt); void svc_close_xprt(struct svc_xprt *xprt); @@ -124,6 +123,7 @@ struct svc_xprt *svc_find_xprt(struct svc_serv *serv, const char *xcl_name, struct net *net, const sa_family_t af, const unsigned short port); int svc_xprt_names(struct svc_serv *serv, char *buf, const int buflen); +void svc_add_new_perm_xprt(struct svc_serv *serv, struct svc_xprt *xprt); static inline void svc_xprt_get(struct svc_xprt *xprt) { @@ -166,8 +166,7 @@ static inline size_t svc_addr_len(const struct sockaddr *sa) case AF_INET6: return sizeof(struct sockaddr_in6); } - - return 0; + BUG(); } static inline unsigned short svc_xprt_local_port(const struct svc_xprt *xprt) diff --git a/include/linux/sunrpc/svcsock.h b/include/linux/sunrpc/svcsock.h index cb4ac69e1f3..92ad02f0dcc 100644 --- a/include/linux/sunrpc/svcsock.h +++ b/include/linux/sunrpc/svcsock.h @@ -39,9 +39,6 @@ int svc_recv(struct svc_rqst *, long); int svc_send(struct svc_rqst *); void svc_drop(struct svc_rqst *); void svc_sock_update_bufs(struct svc_serv *serv); -int svc_sock_names(struct svc_serv *serv, char *buf, - const size_t buflen, - const char *toclose); int svc_addsock(struct svc_serv *serv, const int fd, char *name_return, const size_t len); void svc_init_xprt_sock(void); diff --git a/include/linux/swab.h b/include/linux/swab.h index ea0c02fd516..9ad3c60f6ca 100644 --- a/include/linux/swab.h +++ b/include/linux/swab.h @@ -1,284 +1,8 @@ #ifndef _LINUX_SWAB_H #define _LINUX_SWAB_H -#include <linux/types.h> -#include <linux/compiler.h> -#include <asm/swab.h> +#include <uapi/linux/swab.h> -/* - * casts are necessary for constants, because we never know how for sure - * how U/UL/ULL map to __u16, __u32, __u64. At least not in a portable way. - */ -#define ___constant_swab16(x) ((__u16)( \ - (((__u16)(x) & (__u16)0x00ffU) << 8) | \ - (((__u16)(x) & (__u16)0xff00U) >> 8))) - -#define ___constant_swab32(x) ((__u32)( \ - (((__u32)(x) & (__u32)0x000000ffUL) << 24) | \ - (((__u32)(x) & (__u32)0x0000ff00UL) << 8) | \ - (((__u32)(x) & (__u32)0x00ff0000UL) >> 8) | \ - (((__u32)(x) & (__u32)0xff000000UL) >> 24))) - -#define ___constant_swab64(x) ((__u64)( \ - (((__u64)(x) & (__u64)0x00000000000000ffULL) << 56) | \ - (((__u64)(x) & (__u64)0x000000000000ff00ULL) << 40) | \ - (((__u64)(x) & (__u64)0x0000000000ff0000ULL) << 24) | \ - (((__u64)(x) & (__u64)0x00000000ff000000ULL) << 8) | \ - (((__u64)(x) & (__u64)0x000000ff00000000ULL) >> 8) | \ - (((__u64)(x) & (__u64)0x0000ff0000000000ULL) >> 24) | \ - (((__u64)(x) & (__u64)0x00ff000000000000ULL) >> 40) | \ - (((__u64)(x) & (__u64)0xff00000000000000ULL) >> 56))) - -#define ___constant_swahw32(x) ((__u32)( \ - (((__u32)(x) & (__u32)0x0000ffffUL) << 16) | \ - (((__u32)(x) & (__u32)0xffff0000UL) >> 16))) - -#define ___constant_swahb32(x) ((__u32)( \ - (((__u32)(x) & (__u32)0x00ff00ffUL) << 8) | \ - (((__u32)(x) & (__u32)0xff00ff00UL) >> 8))) - -/* - * Implement the following as inlines, but define the interface using - * macros to allow constant folding when possible: - * ___swab16, ___swab32, ___swab64, ___swahw32, ___swahb32 - */ - -static inline __attribute_const__ __u16 __fswab16(__u16 val) -{ -#ifdef __arch_swab16 - return __arch_swab16(val); -#else - return ___constant_swab16(val); -#endif -} - -static inline __attribute_const__ __u32 __fswab32(__u32 val) -{ -#ifdef __arch_swab32 - return __arch_swab32(val); -#else - return ___constant_swab32(val); -#endif -} - -static inline __attribute_const__ __u64 __fswab64(__u64 val) -{ -#ifdef __arch_swab64 - return __arch_swab64(val); -#elif defined(__SWAB_64_THRU_32__) - __u32 h = val >> 32; - __u32 l = val & ((1ULL << 32) - 1); - return (((__u64)__fswab32(l)) << 32) | ((__u64)(__fswab32(h))); -#else - return ___constant_swab64(val); -#endif -} - -static inline __attribute_const__ __u32 __fswahw32(__u32 val) -{ -#ifdef __arch_swahw32 - return __arch_swahw32(val); -#else - return ___constant_swahw32(val); -#endif -} - -static inline __attribute_const__ __u32 __fswahb32(__u32 val) -{ -#ifdef __arch_swahb32 - return __arch_swahb32(val); -#else - return ___constant_swahb32(val); -#endif -} - -/** - * __swab16 - return a byteswapped 16-bit value - * @x: value to byteswap - */ -#define __swab16(x) \ - (__builtin_constant_p((__u16)(x)) ? \ - ___constant_swab16(x) : \ - __fswab16(x)) - -/** - * __swab32 - return a byteswapped 32-bit value - * @x: value to byteswap - */ -#define __swab32(x) \ - (__builtin_constant_p((__u32)(x)) ? \ - ___constant_swab32(x) : \ - __fswab32(x)) - -/** - * __swab64 - return a byteswapped 64-bit value - * @x: value to byteswap - */ -#define __swab64(x) \ - (__builtin_constant_p((__u64)(x)) ? \ - ___constant_swab64(x) : \ - __fswab64(x)) - -/** - * __swahw32 - return a word-swapped 32-bit value - * @x: value to wordswap - * - * __swahw32(0x12340000) is 0x00001234 - */ -#define __swahw32(x) \ - (__builtin_constant_p((__u32)(x)) ? \ - ___constant_swahw32(x) : \ - __fswahw32(x)) - -/** - * __swahb32 - return a high and low byte-swapped 32-bit value - * @x: value to byteswap - * - * __swahb32(0x12345678) is 0x34127856 - */ -#define __swahb32(x) \ - (__builtin_constant_p((__u32)(x)) ? \ - ___constant_swahb32(x) : \ - __fswahb32(x)) - -/** - * __swab16p - return a byteswapped 16-bit value from a pointer - * @p: pointer to a naturally-aligned 16-bit value - */ -static inline __u16 __swab16p(const __u16 *p) -{ -#ifdef __arch_swab16p - return __arch_swab16p(p); -#else - return __swab16(*p); -#endif -} - -/** - * __swab32p - return a byteswapped 32-bit value from a pointer - * @p: pointer to a naturally-aligned 32-bit value - */ -static inline __u32 __swab32p(const __u32 *p) -{ -#ifdef __arch_swab32p - return __arch_swab32p(p); -#else - return __swab32(*p); -#endif -} - -/** - * __swab64p - return a byteswapped 64-bit value from a pointer - * @p: pointer to a naturally-aligned 64-bit value - */ -static inline __u64 __swab64p(const __u64 *p) -{ -#ifdef __arch_swab64p - return __arch_swab64p(p); -#else - return __swab64(*p); -#endif -} - -/** - * __swahw32p - return a wordswapped 32-bit value from a pointer - * @p: pointer to a naturally-aligned 32-bit value - * - * See __swahw32() for details of wordswapping. - */ -static inline __u32 __swahw32p(const __u32 *p) -{ -#ifdef __arch_swahw32p - return __arch_swahw32p(p); -#else - return __swahw32(*p); -#endif -} - -/** - * __swahb32p - return a high and low byteswapped 32-bit value from a pointer - * @p: pointer to a naturally-aligned 32-bit value - * - * See __swahb32() for details of high/low byteswapping. - */ -static inline __u32 __swahb32p(const __u32 *p) -{ -#ifdef __arch_swahb32p - return __arch_swahb32p(p); -#else - return __swahb32(*p); -#endif -} - -/** - * __swab16s - byteswap a 16-bit value in-place - * @p: pointer to a naturally-aligned 16-bit value - */ -static inline void __swab16s(__u16 *p) -{ -#ifdef __arch_swab16s - __arch_swab16s(p); -#else - *p = __swab16p(p); -#endif -} -/** - * __swab32s - byteswap a 32-bit value in-place - * @p: pointer to a naturally-aligned 32-bit value - */ -static inline void __swab32s(__u32 *p) -{ -#ifdef __arch_swab32s - __arch_swab32s(p); -#else - *p = __swab32p(p); -#endif -} - -/** - * __swab64s - byteswap a 64-bit value in-place - * @p: pointer to a naturally-aligned 64-bit value - */ -static inline void __swab64s(__u64 *p) -{ -#ifdef __arch_swab64s - __arch_swab64s(p); -#else - *p = __swab64p(p); -#endif -} - -/** - * __swahw32s - wordswap a 32-bit value in-place - * @p: pointer to a naturally-aligned 32-bit value - * - * See __swahw32() for details of wordswapping - */ -static inline void __swahw32s(__u32 *p) -{ -#ifdef __arch_swahw32s - __arch_swahw32s(p); -#else - *p = __swahw32p(p); -#endif -} - -/** - * __swahb32s - high and low byteswap a 32-bit value in-place - * @p: pointer to a naturally-aligned 32-bit value - * - * See __swahb32() for details of high and low byte swapping - */ -static inline void __swahb32s(__u32 *p) -{ -#ifdef __arch_swahb32s - __arch_swahb32s(p); -#else - *p = __swahb32p(p); -#endif -} - -#ifdef __KERNEL__ # define swab16 __swab16 # define swab32 __swab32 # define swab64 __swab64 @@ -294,6 +18,4 @@ static inline void __swahb32s(__u32 *p) # define swab64s __swab64s # define swahw32s __swahw32s # define swahb32s __swahb32s -#endif /* __KERNEL__ */ - #endif /* _LINUX_SWAB_H */ diff --git a/include/linux/synclink.h b/include/linux/synclink.h index 2e7d81c4e5a..f1405b1c71b 100644 --- a/include/linux/synclink.h +++ b/include/linux/synclink.h @@ -8,295 +8,11 @@ * Redistribution of this file is permitted under * the terms of the GNU Public License (GPL) */ - #ifndef _SYNCLINK_H_ #define _SYNCLINK_H_ -#define SYNCLINK_H_VERSION 3.6 - -#include <linux/types.h> - -#define BIT0 0x0001 -#define BIT1 0x0002 -#define BIT2 0x0004 -#define BIT3 0x0008 -#define BIT4 0x0010 -#define BIT5 0x0020 -#define BIT6 0x0040 -#define BIT7 0x0080 -#define BIT8 0x0100 -#define BIT9 0x0200 -#define BIT10 0x0400 -#define BIT11 0x0800 -#define BIT12 0x1000 -#define BIT13 0x2000 -#define BIT14 0x4000 -#define BIT15 0x8000 -#define BIT16 0x00010000 -#define BIT17 0x00020000 -#define BIT18 0x00040000 -#define BIT19 0x00080000 -#define BIT20 0x00100000 -#define BIT21 0x00200000 -#define BIT22 0x00400000 -#define BIT23 0x00800000 -#define BIT24 0x01000000 -#define BIT25 0x02000000 -#define BIT26 0x04000000 -#define BIT27 0x08000000 -#define BIT28 0x10000000 -#define BIT29 0x20000000 -#define BIT30 0x40000000 -#define BIT31 0x80000000 - - -#define HDLC_MAX_FRAME_SIZE 65535 -#define MAX_ASYNC_TRANSMIT 4096 -#define MAX_ASYNC_BUFFER_SIZE 4096 - -#define ASYNC_PARITY_NONE 0 -#define ASYNC_PARITY_EVEN 1 -#define ASYNC_PARITY_ODD 2 -#define ASYNC_PARITY_SPACE 3 - -#define HDLC_FLAG_UNDERRUN_ABORT7 0x0000 -#define HDLC_FLAG_UNDERRUN_ABORT15 0x0001 -#define HDLC_FLAG_UNDERRUN_FLAG 0x0002 -#define HDLC_FLAG_UNDERRUN_CRC 0x0004 -#define HDLC_FLAG_SHARE_ZERO 0x0010 -#define HDLC_FLAG_AUTO_CTS 0x0020 -#define HDLC_FLAG_AUTO_DCD 0x0040 -#define HDLC_FLAG_AUTO_RTS 0x0080 -#define HDLC_FLAG_RXC_DPLL 0x0100 -#define HDLC_FLAG_RXC_BRG 0x0200 -#define HDLC_FLAG_RXC_TXCPIN 0x8000 -#define HDLC_FLAG_RXC_RXCPIN 0x0000 -#define HDLC_FLAG_TXC_DPLL 0x0400 -#define HDLC_FLAG_TXC_BRG 0x0800 -#define HDLC_FLAG_TXC_TXCPIN 0x0000 -#define HDLC_FLAG_TXC_RXCPIN 0x0008 -#define HDLC_FLAG_DPLL_DIV8 0x1000 -#define HDLC_FLAG_DPLL_DIV16 0x2000 -#define HDLC_FLAG_DPLL_DIV32 0x0000 -#define HDLC_FLAG_HDLC_LOOPMODE 0x4000 - -#define HDLC_CRC_NONE 0 -#define HDLC_CRC_16_CCITT 1 -#define HDLC_CRC_32_CCITT 2 -#define HDLC_CRC_MASK 0x00ff -#define HDLC_CRC_RETURN_EX 0x8000 - -#define RX_OK 0 -#define RX_CRC_ERROR 1 - -#define HDLC_TXIDLE_FLAGS 0 -#define HDLC_TXIDLE_ALT_ZEROS_ONES 1 -#define HDLC_TXIDLE_ZEROS 2 -#define HDLC_TXIDLE_ONES 3 -#define HDLC_TXIDLE_ALT_MARK_SPACE 4 -#define HDLC_TXIDLE_SPACE 5 -#define HDLC_TXIDLE_MARK 6 -#define HDLC_TXIDLE_CUSTOM_8 0x10000000 -#define HDLC_TXIDLE_CUSTOM_16 0x20000000 - -#define HDLC_ENCODING_NRZ 0 -#define HDLC_ENCODING_NRZB 1 -#define HDLC_ENCODING_NRZI_MARK 2 -#define HDLC_ENCODING_NRZI_SPACE 3 -#define HDLC_ENCODING_NRZI HDLC_ENCODING_NRZI_SPACE -#define HDLC_ENCODING_BIPHASE_MARK 4 -#define HDLC_ENCODING_BIPHASE_SPACE 5 -#define HDLC_ENCODING_BIPHASE_LEVEL 6 -#define HDLC_ENCODING_DIFF_BIPHASE_LEVEL 7 - -#define HDLC_PREAMBLE_LENGTH_8BITS 0 -#define HDLC_PREAMBLE_LENGTH_16BITS 1 -#define HDLC_PREAMBLE_LENGTH_32BITS 2 -#define HDLC_PREAMBLE_LENGTH_64BITS 3 - -#define HDLC_PREAMBLE_PATTERN_NONE 0 -#define HDLC_PREAMBLE_PATTERN_ZEROS 1 -#define HDLC_PREAMBLE_PATTERN_FLAGS 2 -#define HDLC_PREAMBLE_PATTERN_10 3 -#define HDLC_PREAMBLE_PATTERN_01 4 -#define HDLC_PREAMBLE_PATTERN_ONES 5 - -#define MGSL_MODE_ASYNC 1 -#define MGSL_MODE_HDLC 2 -#define MGSL_MODE_MONOSYNC 3 -#define MGSL_MODE_BISYNC 4 -#define MGSL_MODE_RAW 6 -#define MGSL_MODE_BASE_CLOCK 7 -#define MGSL_MODE_XSYNC 8 - -#define MGSL_BUS_TYPE_ISA 1 -#define MGSL_BUS_TYPE_EISA 2 -#define MGSL_BUS_TYPE_PCI 5 - -#define MGSL_INTERFACE_MASK 0xf -#define MGSL_INTERFACE_DISABLE 0 -#define MGSL_INTERFACE_RS232 1 -#define MGSL_INTERFACE_V35 2 -#define MGSL_INTERFACE_RS422 3 -#define MGSL_INTERFACE_RTS_EN 0x10 -#define MGSL_INTERFACE_LL 0x20 -#define MGSL_INTERFACE_RL 0x40 -#define MGSL_INTERFACE_MSB_FIRST 0x80 - -typedef struct _MGSL_PARAMS -{ - /* Common */ - - unsigned long mode; /* Asynchronous or HDLC */ - unsigned char loopback; /* internal loopback mode */ - - /* HDLC Only */ - - unsigned short flags; - unsigned char encoding; /* NRZ, NRZI, etc. */ - unsigned long clock_speed; /* external clock speed in bits per second */ - unsigned char addr_filter; /* receive HDLC address filter, 0xFF = disable */ - unsigned short crc_type; /* None, CRC16-CCITT, or CRC32-CCITT */ - unsigned char preamble_length; - unsigned char preamble; - /* Async Only */ +#include <uapi/linux/synclink.h> - unsigned long data_rate; /* bits per second */ - unsigned char data_bits; /* 7 or 8 data bits */ - unsigned char stop_bits; /* 1 or 2 stop bits */ - unsigned char parity; /* none, even, or odd */ - -} MGSL_PARAMS, *PMGSL_PARAMS; - -#define MICROGATE_VENDOR_ID 0x13c0 -#define SYNCLINK_DEVICE_ID 0x0010 -#define MGSCC_DEVICE_ID 0x0020 -#define SYNCLINK_SCA_DEVICE_ID 0x0030 -#define SYNCLINK_GT_DEVICE_ID 0x0070 -#define SYNCLINK_GT4_DEVICE_ID 0x0080 -#define SYNCLINK_AC_DEVICE_ID 0x0090 -#define SYNCLINK_GT2_DEVICE_ID 0x00A0 -#define MGSL_MAX_SERIAL_NUMBER 30 - -/* -** device diagnostics status -*/ - -#define DiagStatus_OK 0 -#define DiagStatus_AddressFailure 1 -#define DiagStatus_AddressConflict 2 -#define DiagStatus_IrqFailure 3 -#define DiagStatus_IrqConflict 4 -#define DiagStatus_DmaFailure 5 -#define DiagStatus_DmaConflict 6 -#define DiagStatus_PciAdapterNotFound 7 -#define DiagStatus_CantAssignPciResources 8 -#define DiagStatus_CantAssignPciMemAddr 9 -#define DiagStatus_CantAssignPciIoAddr 10 -#define DiagStatus_CantAssignPciIrq 11 -#define DiagStatus_MemoryError 12 - -#define SerialSignal_DCD 0x01 /* Data Carrier Detect */ -#define SerialSignal_TXD 0x02 /* Transmit Data */ -#define SerialSignal_RI 0x04 /* Ring Indicator */ -#define SerialSignal_RXD 0x08 /* Receive Data */ -#define SerialSignal_CTS 0x10 /* Clear to Send */ -#define SerialSignal_RTS 0x20 /* Request to Send */ -#define SerialSignal_DSR 0x40 /* Data Set Ready */ -#define SerialSignal_DTR 0x80 /* Data Terminal Ready */ - - -/* - * Counters of the input lines (CTS, DSR, RI, CD) interrupts - */ -struct mgsl_icount { - __u32 cts, dsr, rng, dcd, tx, rx; - __u32 frame, parity, overrun, brk; - __u32 buf_overrun; - __u32 txok; - __u32 txunder; - __u32 txabort; - __u32 txtimeout; - __u32 rxshort; - __u32 rxlong; - __u32 rxabort; - __u32 rxover; - __u32 rxcrc; - __u32 rxok; - __u32 exithunt; - __u32 rxidle; -}; - -struct gpio_desc { - __u32 state; - __u32 smask; - __u32 dir; - __u32 dmask; -}; - -#define DEBUG_LEVEL_DATA 1 -#define DEBUG_LEVEL_ERROR 2 -#define DEBUG_LEVEL_INFO 3 -#define DEBUG_LEVEL_BH 4 -#define DEBUG_LEVEL_ISR 5 - -/* -** Event bit flags for use with MgslWaitEvent -*/ - -#define MgslEvent_DsrActive 0x0001 -#define MgslEvent_DsrInactive 0x0002 -#define MgslEvent_Dsr 0x0003 -#define MgslEvent_CtsActive 0x0004 -#define MgslEvent_CtsInactive 0x0008 -#define MgslEvent_Cts 0x000c -#define MgslEvent_DcdActive 0x0010 -#define MgslEvent_DcdInactive 0x0020 -#define MgslEvent_Dcd 0x0030 -#define MgslEvent_RiActive 0x0040 -#define MgslEvent_RiInactive 0x0080 -#define MgslEvent_Ri 0x00c0 -#define MgslEvent_ExitHuntMode 0x0100 -#define MgslEvent_IdleReceived 0x0200 - -/* Private IOCTL codes: - * - * MGSL_IOCSPARAMS set MGSL_PARAMS structure values - * MGSL_IOCGPARAMS get current MGSL_PARAMS structure values - * MGSL_IOCSTXIDLE set current transmit idle mode - * MGSL_IOCGTXIDLE get current transmit idle mode - * MGSL_IOCTXENABLE enable or disable transmitter - * MGSL_IOCRXENABLE enable or disable receiver - * MGSL_IOCTXABORT abort transmitting frame (HDLC) - * MGSL_IOCGSTATS return current statistics - * MGSL_IOCWAITEVENT wait for specified event to occur - * MGSL_LOOPTXDONE transmit in HDLC LoopMode done - * MGSL_IOCSIF set the serial interface type - * MGSL_IOCGIF get the serial interface type - */ -#define MGSL_MAGIC_IOC 'm' -#define MGSL_IOCSPARAMS _IOW(MGSL_MAGIC_IOC,0,struct _MGSL_PARAMS) -#define MGSL_IOCGPARAMS _IOR(MGSL_MAGIC_IOC,1,struct _MGSL_PARAMS) -#define MGSL_IOCSTXIDLE _IO(MGSL_MAGIC_IOC,2) -#define MGSL_IOCGTXIDLE _IO(MGSL_MAGIC_IOC,3) -#define MGSL_IOCTXENABLE _IO(MGSL_MAGIC_IOC,4) -#define MGSL_IOCRXENABLE _IO(MGSL_MAGIC_IOC,5) -#define MGSL_IOCTXABORT _IO(MGSL_MAGIC_IOC,6) -#define MGSL_IOCGSTATS _IO(MGSL_MAGIC_IOC,7) -#define MGSL_IOCWAITEVENT _IOWR(MGSL_MAGIC_IOC,8,int) -#define MGSL_IOCCLRMODCOUNT _IO(MGSL_MAGIC_IOC,15) -#define MGSL_IOCLOOPTXDONE _IO(MGSL_MAGIC_IOC,9) -#define MGSL_IOCSIF _IO(MGSL_MAGIC_IOC,10) -#define MGSL_IOCGIF _IO(MGSL_MAGIC_IOC,11) -#define MGSL_IOCSGPIO _IOW(MGSL_MAGIC_IOC,16,struct gpio_desc) -#define MGSL_IOCGGPIO _IOR(MGSL_MAGIC_IOC,17,struct gpio_desc) -#define MGSL_IOCWAITGPIO _IOWR(MGSL_MAGIC_IOC,18,struct gpio_desc) -#define MGSL_IOCSXSYNC _IO(MGSL_MAGIC_IOC, 19) -#define MGSL_IOCGXSYNC _IO(MGSL_MAGIC_IOC, 20) -#define MGSL_IOCSXCTRL _IO(MGSL_MAGIC_IOC, 21) -#define MGSL_IOCGXCTRL _IO(MGSL_MAGIC_IOC, 22) - -#ifdef __KERNEL__ /* provide 32 bit ioctl compatibility on 64 bit systems */ #ifdef CONFIG_COMPAT #include <linux/compat.h> @@ -318,6 +34,4 @@ struct MGSL_PARAMS32 { #define MGSL_IOCSPARAMS32 _IOW(MGSL_MAGIC_IOC,0,struct MGSL_PARAMS32) #define MGSL_IOCGPARAMS32 _IOR(MGSL_MAGIC_IOC,1,struct MGSL_PARAMS32) #endif -#endif - #endif /* _SYNCLINK_H_ */ diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h index 19439c75c5b..727f0cd7392 100644 --- a/include/linux/syscalls.h +++ b/include/linux/syscalls.h @@ -827,7 +827,15 @@ asmlinkage long sys_fanotify_mark(int fanotify_fd, unsigned int flags, const char __user *pathname); asmlinkage long sys_syncfs(int fd); +#ifndef CONFIG_GENERIC_KERNEL_EXECVE int kernel_execve(const char *filename, const char *const argv[], const char *const envp[]); +#else +#define kernel_execve(filename, argv, envp) \ + do_execve(filename, \ + (const char __user *const __user *)argv, \ + (const char __user *const __user *)envp, \ + current_pt_regs()) +#endif asmlinkage long sys_perf_event_open( diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h index c34b4c82b0d..cd844a6a8d5 100644 --- a/include/linux/sysctl.h +++ b/include/linux/sysctl.h @@ -18,921 +18,14 @@ **************************************************************** **************************************************************** */ - #ifndef _LINUX_SYSCTL_H #define _LINUX_SYSCTL_H -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/compiler.h> - -struct completion; - -#define CTL_MAXNAME 10 /* how many path components do we allow in a - call to sysctl? In other words, what is - the largest acceptable value for the nlen - member of a struct __sysctl_args to have? */ - -struct __sysctl_args { - int __user *name; - int nlen; - void __user *oldval; - size_t __user *oldlenp; - void __user *newval; - size_t newlen; - unsigned long __unused[4]; -}; - -/* Define sysctl names first */ - -/* Top-level names: */ - -enum -{ - CTL_KERN=1, /* General kernel info and control */ - CTL_VM=2, /* VM management */ - CTL_NET=3, /* Networking */ - CTL_PROC=4, /* removal breaks strace(1) compilation */ - CTL_FS=5, /* Filesystems */ - CTL_DEBUG=6, /* Debugging */ - CTL_DEV=7, /* Devices */ - CTL_BUS=8, /* Busses */ - CTL_ABI=9, /* Binary emulation */ - CTL_CPU=10, /* CPU stuff (speed scaling, etc) */ - CTL_ARLAN=254, /* arlan wireless driver */ - CTL_S390DBF=5677, /* s390 debug */ - CTL_SUNRPC=7249, /* sunrpc debug */ - CTL_PM=9899, /* frv power management */ - CTL_FRV=9898, /* frv specific sysctls */ -}; - -/* CTL_BUS names: */ -enum -{ - CTL_BUS_ISA=1 /* ISA */ -}; - -/* /proc/sys/fs/inotify/ */ -enum -{ - INOTIFY_MAX_USER_INSTANCES=1, /* max instances per user */ - INOTIFY_MAX_USER_WATCHES=2, /* max watches per user */ - INOTIFY_MAX_QUEUED_EVENTS=3 /* max queued events per instance */ -}; - -/* CTL_KERN names: */ -enum -{ - KERN_OSTYPE=1, /* string: system version */ - KERN_OSRELEASE=2, /* string: system release */ - KERN_OSREV=3, /* int: system revision */ - KERN_VERSION=4, /* string: compile time info */ - KERN_SECUREMASK=5, /* struct: maximum rights mask */ - KERN_PROF=6, /* table: profiling information */ - KERN_NODENAME=7, /* string: hostname */ - KERN_DOMAINNAME=8, /* string: domainname */ - - KERN_PANIC=15, /* int: panic timeout */ - KERN_REALROOTDEV=16, /* real root device to mount after initrd */ - - KERN_SPARC_REBOOT=21, /* reboot command on Sparc */ - KERN_CTLALTDEL=22, /* int: allow ctl-alt-del to reboot */ - KERN_PRINTK=23, /* struct: control printk logging parameters */ - KERN_NAMETRANS=24, /* Name translation */ - KERN_PPC_HTABRECLAIM=25, /* turn htab reclaimation on/off on PPC */ - KERN_PPC_ZEROPAGED=26, /* turn idle page zeroing on/off on PPC */ - KERN_PPC_POWERSAVE_NAP=27, /* use nap mode for power saving */ - KERN_MODPROBE=28, /* string: modprobe path */ - KERN_SG_BIG_BUFF=29, /* int: sg driver reserved buffer size */ - KERN_ACCT=30, /* BSD process accounting parameters */ - KERN_PPC_L2CR=31, /* l2cr register on PPC */ - - KERN_RTSIGNR=32, /* Number of rt sigs queued */ - KERN_RTSIGMAX=33, /* Max queuable */ - - KERN_SHMMAX=34, /* long: Maximum shared memory segment */ - KERN_MSGMAX=35, /* int: Maximum size of a messege */ - KERN_MSGMNB=36, /* int: Maximum message queue size */ - KERN_MSGPOOL=37, /* int: Maximum system message pool size */ - KERN_SYSRQ=38, /* int: Sysreq enable */ - KERN_MAX_THREADS=39, /* int: Maximum nr of threads in the system */ - KERN_RANDOM=40, /* Random driver */ - KERN_SHMALL=41, /* int: Maximum size of shared memory */ - KERN_MSGMNI=42, /* int: msg queue identifiers */ - KERN_SEM=43, /* struct: sysv semaphore limits */ - KERN_SPARC_STOP_A=44, /* int: Sparc Stop-A enable */ - KERN_SHMMNI=45, /* int: shm array identifiers */ - KERN_OVERFLOWUID=46, /* int: overflow UID */ - KERN_OVERFLOWGID=47, /* int: overflow GID */ - KERN_SHMPATH=48, /* string: path to shm fs */ - KERN_HOTPLUG=49, /* string: path to uevent helper (deprecated) */ - KERN_IEEE_EMULATION_WARNINGS=50, /* int: unimplemented ieee instructions */ - KERN_S390_USER_DEBUG_LOGGING=51, /* int: dumps of user faults */ - KERN_CORE_USES_PID=52, /* int: use core or core.%pid */ - KERN_TAINTED=53, /* int: various kernel tainted flags */ - KERN_CADPID=54, /* int: PID of the process to notify on CAD */ - KERN_PIDMAX=55, /* int: PID # limit */ - KERN_CORE_PATTERN=56, /* string: pattern for core-file names */ - KERN_PANIC_ON_OOPS=57, /* int: whether we will panic on an oops */ - KERN_HPPA_PWRSW=58, /* int: hppa soft-power enable */ - KERN_HPPA_UNALIGNED=59, /* int: hppa unaligned-trap enable */ - KERN_PRINTK_RATELIMIT=60, /* int: tune printk ratelimiting */ - KERN_PRINTK_RATELIMIT_BURST=61, /* int: tune printk ratelimiting */ - KERN_PTY=62, /* dir: pty driver */ - KERN_NGROUPS_MAX=63, /* int: NGROUPS_MAX */ - KERN_SPARC_SCONS_PWROFF=64, /* int: serial console power-off halt */ - KERN_HZ_TIMER=65, /* int: hz timer on or off */ - KERN_UNKNOWN_NMI_PANIC=66, /* int: unknown nmi panic flag */ - KERN_BOOTLOADER_TYPE=67, /* int: boot loader type */ - KERN_RANDOMIZE=68, /* int: randomize virtual address space */ - KERN_SETUID_DUMPABLE=69, /* int: behaviour of dumps for setuid core */ - KERN_SPIN_RETRY=70, /* int: number of spinlock retries */ - KERN_ACPI_VIDEO_FLAGS=71, /* int: flags for setting up video after ACPI sleep */ - KERN_IA64_UNALIGNED=72, /* int: ia64 unaligned userland trap enable */ - KERN_COMPAT_LOG=73, /* int: print compat layer messages */ - KERN_MAX_LOCK_DEPTH=74, /* int: rtmutex's maximum lock depth */ - KERN_NMI_WATCHDOG=75, /* int: enable/disable nmi watchdog */ - KERN_PANIC_ON_NMI=76, /* int: whether we will panic on an unrecovered */ -}; - - - -/* CTL_VM names: */ -enum -{ - VM_UNUSED1=1, /* was: struct: Set vm swapping control */ - VM_UNUSED2=2, /* was; int: Linear or sqrt() swapout for hogs */ - VM_UNUSED3=3, /* was: struct: Set free page thresholds */ - VM_UNUSED4=4, /* Spare */ - VM_OVERCOMMIT_MEMORY=5, /* Turn off the virtual memory safety limit */ - VM_UNUSED5=6, /* was: struct: Set buffer memory thresholds */ - VM_UNUSED7=7, /* was: struct: Set cache memory thresholds */ - VM_UNUSED8=8, /* was: struct: Control kswapd behaviour */ - VM_UNUSED9=9, /* was: struct: Set page table cache parameters */ - VM_PAGE_CLUSTER=10, /* int: set number of pages to swap together */ - VM_DIRTY_BACKGROUND=11, /* dirty_background_ratio */ - VM_DIRTY_RATIO=12, /* dirty_ratio */ - VM_DIRTY_WB_CS=13, /* dirty_writeback_centisecs */ - VM_DIRTY_EXPIRE_CS=14, /* dirty_expire_centisecs */ - VM_NR_PDFLUSH_THREADS=15, /* nr_pdflush_threads */ - VM_OVERCOMMIT_RATIO=16, /* percent of RAM to allow overcommit in */ - VM_PAGEBUF=17, /* struct: Control pagebuf parameters */ - VM_HUGETLB_PAGES=18, /* int: Number of available Huge Pages */ - VM_SWAPPINESS=19, /* Tendency to steal mapped memory */ - VM_LOWMEM_RESERVE_RATIO=20,/* reservation ratio for lower memory zones */ - VM_MIN_FREE_KBYTES=21, /* Minimum free kilobytes to maintain */ - VM_MAX_MAP_COUNT=22, /* int: Maximum number of mmaps/address-space */ - VM_LAPTOP_MODE=23, /* vm laptop mode */ - VM_BLOCK_DUMP=24, /* block dump mode */ - VM_HUGETLB_GROUP=25, /* permitted hugetlb group */ - VM_VFS_CACHE_PRESSURE=26, /* dcache/icache reclaim pressure */ - VM_LEGACY_VA_LAYOUT=27, /* legacy/compatibility virtual address space layout */ - VM_SWAP_TOKEN_TIMEOUT=28, /* default time for token time out */ - VM_DROP_PAGECACHE=29, /* int: nuke lots of pagecache */ - VM_PERCPU_PAGELIST_FRACTION=30,/* int: fraction of pages in each percpu_pagelist */ - VM_ZONE_RECLAIM_MODE=31, /* reclaim local zone memory before going off node */ - VM_MIN_UNMAPPED=32, /* Set min percent of unmapped pages */ - VM_PANIC_ON_OOM=33, /* panic at out-of-memory */ - VM_VDSO_ENABLED=34, /* map VDSO into new processes? */ - VM_MIN_SLAB=35, /* Percent pages ignored by zone reclaim */ -}; - - -/* CTL_NET names: */ -enum -{ - NET_CORE=1, - NET_ETHER=2, - NET_802=3, - NET_UNIX=4, - NET_IPV4=5, - NET_IPX=6, - NET_ATALK=7, - NET_NETROM=8, - NET_AX25=9, - NET_BRIDGE=10, - NET_ROSE=11, - NET_IPV6=12, - NET_X25=13, - NET_TR=14, - NET_DECNET=15, - NET_ECONET=16, - NET_SCTP=17, - NET_LLC=18, - NET_NETFILTER=19, - NET_DCCP=20, - NET_IRDA=412, -}; - -/* /proc/sys/kernel/random */ -enum -{ - RANDOM_POOLSIZE=1, - RANDOM_ENTROPY_COUNT=2, - RANDOM_READ_THRESH=3, - RANDOM_WRITE_THRESH=4, - RANDOM_BOOT_ID=5, - RANDOM_UUID=6 -}; - -/* /proc/sys/kernel/pty */ -enum -{ - PTY_MAX=1, - PTY_NR=2 -}; - -/* /proc/sys/bus/isa */ -enum -{ - BUS_ISA_MEM_BASE=1, - BUS_ISA_PORT_BASE=2, - BUS_ISA_PORT_SHIFT=3 -}; - -/* /proc/sys/net/core */ -enum -{ - NET_CORE_WMEM_MAX=1, - NET_CORE_RMEM_MAX=2, - NET_CORE_WMEM_DEFAULT=3, - NET_CORE_RMEM_DEFAULT=4, -/* was NET_CORE_DESTROY_DELAY */ - NET_CORE_MAX_BACKLOG=6, - NET_CORE_FASTROUTE=7, - NET_CORE_MSG_COST=8, - NET_CORE_MSG_BURST=9, - NET_CORE_OPTMEM_MAX=10, - NET_CORE_HOT_LIST_LENGTH=11, - NET_CORE_DIVERT_VERSION=12, - NET_CORE_NO_CONG_THRESH=13, - NET_CORE_NO_CONG=14, - NET_CORE_LO_CONG=15, - NET_CORE_MOD_CONG=16, - NET_CORE_DEV_WEIGHT=17, - NET_CORE_SOMAXCONN=18, - NET_CORE_BUDGET=19, - NET_CORE_AEVENT_ETIME=20, - NET_CORE_AEVENT_RSEQTH=21, - NET_CORE_WARNINGS=22, -}; - -/* /proc/sys/net/ethernet */ - -/* /proc/sys/net/802 */ - -/* /proc/sys/net/unix */ - -enum -{ - NET_UNIX_DESTROY_DELAY=1, - NET_UNIX_DELETE_DELAY=2, - NET_UNIX_MAX_DGRAM_QLEN=3, -}; - -/* /proc/sys/net/netfilter */ -enum -{ - NET_NF_CONNTRACK_MAX=1, - NET_NF_CONNTRACK_TCP_TIMEOUT_SYN_SENT=2, - NET_NF_CONNTRACK_TCP_TIMEOUT_SYN_RECV=3, - NET_NF_CONNTRACK_TCP_TIMEOUT_ESTABLISHED=4, - NET_NF_CONNTRACK_TCP_TIMEOUT_FIN_WAIT=5, - NET_NF_CONNTRACK_TCP_TIMEOUT_CLOSE_WAIT=6, - NET_NF_CONNTRACK_TCP_TIMEOUT_LAST_ACK=7, - NET_NF_CONNTRACK_TCP_TIMEOUT_TIME_WAIT=8, - NET_NF_CONNTRACK_TCP_TIMEOUT_CLOSE=9, - NET_NF_CONNTRACK_UDP_TIMEOUT=10, - NET_NF_CONNTRACK_UDP_TIMEOUT_STREAM=11, - NET_NF_CONNTRACK_ICMP_TIMEOUT=12, - NET_NF_CONNTRACK_GENERIC_TIMEOUT=13, - NET_NF_CONNTRACK_BUCKETS=14, - NET_NF_CONNTRACK_LOG_INVALID=15, - NET_NF_CONNTRACK_TCP_TIMEOUT_MAX_RETRANS=16, - NET_NF_CONNTRACK_TCP_LOOSE=17, - NET_NF_CONNTRACK_TCP_BE_LIBERAL=18, - NET_NF_CONNTRACK_TCP_MAX_RETRANS=19, - NET_NF_CONNTRACK_SCTP_TIMEOUT_CLOSED=20, - NET_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_WAIT=21, - NET_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_ECHOED=22, - NET_NF_CONNTRACK_SCTP_TIMEOUT_ESTABLISHED=23, - NET_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_SENT=24, - NET_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_RECD=25, - NET_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_ACK_SENT=26, - NET_NF_CONNTRACK_COUNT=27, - NET_NF_CONNTRACK_ICMPV6_TIMEOUT=28, - NET_NF_CONNTRACK_FRAG6_TIMEOUT=29, - NET_NF_CONNTRACK_FRAG6_LOW_THRESH=30, - NET_NF_CONNTRACK_FRAG6_HIGH_THRESH=31, - NET_NF_CONNTRACK_CHECKSUM=32, -}; - -/* /proc/sys/net/ipv4 */ -enum -{ - /* v2.0 compatibile variables */ - NET_IPV4_FORWARD=8, - NET_IPV4_DYNADDR=9, - - NET_IPV4_CONF=16, - NET_IPV4_NEIGH=17, - NET_IPV4_ROUTE=18, - NET_IPV4_FIB_HASH=19, - NET_IPV4_NETFILTER=20, - - NET_IPV4_TCP_TIMESTAMPS=33, - NET_IPV4_TCP_WINDOW_SCALING=34, - NET_IPV4_TCP_SACK=35, - NET_IPV4_TCP_RETRANS_COLLAPSE=36, - NET_IPV4_DEFAULT_TTL=37, - NET_IPV4_AUTOCONFIG=38, - NET_IPV4_NO_PMTU_DISC=39, - NET_IPV4_TCP_SYN_RETRIES=40, - NET_IPV4_IPFRAG_HIGH_THRESH=41, - NET_IPV4_IPFRAG_LOW_THRESH=42, - NET_IPV4_IPFRAG_TIME=43, - NET_IPV4_TCP_MAX_KA_PROBES=44, - NET_IPV4_TCP_KEEPALIVE_TIME=45, - NET_IPV4_TCP_KEEPALIVE_PROBES=46, - NET_IPV4_TCP_RETRIES1=47, - NET_IPV4_TCP_RETRIES2=48, - NET_IPV4_TCP_FIN_TIMEOUT=49, - NET_IPV4_IP_MASQ_DEBUG=50, - NET_TCP_SYNCOOKIES=51, - NET_TCP_STDURG=52, - NET_TCP_RFC1337=53, - NET_TCP_SYN_TAILDROP=54, - NET_TCP_MAX_SYN_BACKLOG=55, - NET_IPV4_LOCAL_PORT_RANGE=56, - NET_IPV4_ICMP_ECHO_IGNORE_ALL=57, - NET_IPV4_ICMP_ECHO_IGNORE_BROADCASTS=58, - NET_IPV4_ICMP_SOURCEQUENCH_RATE=59, - NET_IPV4_ICMP_DESTUNREACH_RATE=60, - NET_IPV4_ICMP_TIMEEXCEED_RATE=61, - NET_IPV4_ICMP_PARAMPROB_RATE=62, - NET_IPV4_ICMP_ECHOREPLY_RATE=63, - NET_IPV4_ICMP_IGNORE_BOGUS_ERROR_RESPONSES=64, - NET_IPV4_IGMP_MAX_MEMBERSHIPS=65, - NET_TCP_TW_RECYCLE=66, - NET_IPV4_ALWAYS_DEFRAG=67, - NET_IPV4_TCP_KEEPALIVE_INTVL=68, - NET_IPV4_INET_PEER_THRESHOLD=69, - NET_IPV4_INET_PEER_MINTTL=70, - NET_IPV4_INET_PEER_MAXTTL=71, - NET_IPV4_INET_PEER_GC_MINTIME=72, - NET_IPV4_INET_PEER_GC_MAXTIME=73, - NET_TCP_ORPHAN_RETRIES=74, - NET_TCP_ABORT_ON_OVERFLOW=75, - NET_TCP_SYNACK_RETRIES=76, - NET_TCP_MAX_ORPHANS=77, - NET_TCP_MAX_TW_BUCKETS=78, - NET_TCP_FACK=79, - NET_TCP_REORDERING=80, - NET_TCP_ECN=81, - NET_TCP_DSACK=82, - NET_TCP_MEM=83, - NET_TCP_WMEM=84, - NET_TCP_RMEM=85, - NET_TCP_APP_WIN=86, - NET_TCP_ADV_WIN_SCALE=87, - NET_IPV4_NONLOCAL_BIND=88, - NET_IPV4_ICMP_RATELIMIT=89, - NET_IPV4_ICMP_RATEMASK=90, - NET_TCP_TW_REUSE=91, - NET_TCP_FRTO=92, - NET_TCP_LOW_LATENCY=93, - NET_IPV4_IPFRAG_SECRET_INTERVAL=94, - NET_IPV4_IGMP_MAX_MSF=96, - NET_TCP_NO_METRICS_SAVE=97, - NET_TCP_DEFAULT_WIN_SCALE=105, - NET_TCP_MODERATE_RCVBUF=106, - NET_TCP_TSO_WIN_DIVISOR=107, - NET_TCP_BIC_BETA=108, - NET_IPV4_ICMP_ERRORS_USE_INBOUND_IFADDR=109, - NET_TCP_CONG_CONTROL=110, - NET_TCP_ABC=111, - NET_IPV4_IPFRAG_MAX_DIST=112, - NET_TCP_MTU_PROBING=113, - NET_TCP_BASE_MSS=114, - NET_IPV4_TCP_WORKAROUND_SIGNED_WINDOWS=115, - NET_TCP_DMA_COPYBREAK=116, - NET_TCP_SLOW_START_AFTER_IDLE=117, - NET_CIPSOV4_CACHE_ENABLE=118, - NET_CIPSOV4_CACHE_BUCKET_SIZE=119, - NET_CIPSOV4_RBM_OPTFMT=120, - NET_CIPSOV4_RBM_STRICTVALID=121, - NET_TCP_AVAIL_CONG_CONTROL=122, - NET_TCP_ALLOWED_CONG_CONTROL=123, - NET_TCP_MAX_SSTHRESH=124, - NET_TCP_FRTO_RESPONSE=125, -}; - -enum { - NET_IPV4_ROUTE_FLUSH=1, - NET_IPV4_ROUTE_MIN_DELAY=2, /* obsolete since 2.6.25 */ - NET_IPV4_ROUTE_MAX_DELAY=3, /* obsolete since 2.6.25 */ - NET_IPV4_ROUTE_GC_THRESH=4, - NET_IPV4_ROUTE_MAX_SIZE=5, - NET_IPV4_ROUTE_GC_MIN_INTERVAL=6, - NET_IPV4_ROUTE_GC_TIMEOUT=7, - NET_IPV4_ROUTE_GC_INTERVAL=8, /* obsolete since 2.6.38 */ - NET_IPV4_ROUTE_REDIRECT_LOAD=9, - NET_IPV4_ROUTE_REDIRECT_NUMBER=10, - NET_IPV4_ROUTE_REDIRECT_SILENCE=11, - NET_IPV4_ROUTE_ERROR_COST=12, - NET_IPV4_ROUTE_ERROR_BURST=13, - NET_IPV4_ROUTE_GC_ELASTICITY=14, - NET_IPV4_ROUTE_MTU_EXPIRES=15, - NET_IPV4_ROUTE_MIN_PMTU=16, - NET_IPV4_ROUTE_MIN_ADVMSS=17, - NET_IPV4_ROUTE_SECRET_INTERVAL=18, - NET_IPV4_ROUTE_GC_MIN_INTERVAL_MS=19, -}; - -enum -{ - NET_PROTO_CONF_ALL=-2, - NET_PROTO_CONF_DEFAULT=-3 - - /* And device ifindices ... */ -}; - -enum -{ - NET_IPV4_CONF_FORWARDING=1, - NET_IPV4_CONF_MC_FORWARDING=2, - NET_IPV4_CONF_PROXY_ARP=3, - NET_IPV4_CONF_ACCEPT_REDIRECTS=4, - NET_IPV4_CONF_SECURE_REDIRECTS=5, - NET_IPV4_CONF_SEND_REDIRECTS=6, - NET_IPV4_CONF_SHARED_MEDIA=7, - NET_IPV4_CONF_RP_FILTER=8, - NET_IPV4_CONF_ACCEPT_SOURCE_ROUTE=9, - NET_IPV4_CONF_BOOTP_RELAY=10, - NET_IPV4_CONF_LOG_MARTIANS=11, - NET_IPV4_CONF_TAG=12, - NET_IPV4_CONF_ARPFILTER=13, - NET_IPV4_CONF_MEDIUM_ID=14, - NET_IPV4_CONF_NOXFRM=15, - NET_IPV4_CONF_NOPOLICY=16, - NET_IPV4_CONF_FORCE_IGMP_VERSION=17, - NET_IPV4_CONF_ARP_ANNOUNCE=18, - NET_IPV4_CONF_ARP_IGNORE=19, - NET_IPV4_CONF_PROMOTE_SECONDARIES=20, - NET_IPV4_CONF_ARP_ACCEPT=21, - NET_IPV4_CONF_ARP_NOTIFY=22, -}; - -/* /proc/sys/net/ipv4/netfilter */ -enum -{ - NET_IPV4_NF_CONNTRACK_MAX=1, - NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_SYN_SENT=2, - NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_SYN_RECV=3, - NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_ESTABLISHED=4, - NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_FIN_WAIT=5, - NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_CLOSE_WAIT=6, - NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_LAST_ACK=7, - NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_TIME_WAIT=8, - NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_CLOSE=9, - NET_IPV4_NF_CONNTRACK_UDP_TIMEOUT=10, - NET_IPV4_NF_CONNTRACK_UDP_TIMEOUT_STREAM=11, - NET_IPV4_NF_CONNTRACK_ICMP_TIMEOUT=12, - NET_IPV4_NF_CONNTRACK_GENERIC_TIMEOUT=13, - NET_IPV4_NF_CONNTRACK_BUCKETS=14, - NET_IPV4_NF_CONNTRACK_LOG_INVALID=15, - NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_MAX_RETRANS=16, - NET_IPV4_NF_CONNTRACK_TCP_LOOSE=17, - NET_IPV4_NF_CONNTRACK_TCP_BE_LIBERAL=18, - NET_IPV4_NF_CONNTRACK_TCP_MAX_RETRANS=19, - NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_CLOSED=20, - NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_WAIT=21, - NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_ECHOED=22, - NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_ESTABLISHED=23, - NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_SENT=24, - NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_RECD=25, - NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_ACK_SENT=26, - NET_IPV4_NF_CONNTRACK_COUNT=27, - NET_IPV4_NF_CONNTRACK_CHECKSUM=28, -}; - -/* /proc/sys/net/ipv6 */ -enum { - NET_IPV6_CONF=16, - NET_IPV6_NEIGH=17, - NET_IPV6_ROUTE=18, - NET_IPV6_ICMP=19, - NET_IPV6_BINDV6ONLY=20, - NET_IPV6_IP6FRAG_HIGH_THRESH=21, - NET_IPV6_IP6FRAG_LOW_THRESH=22, - NET_IPV6_IP6FRAG_TIME=23, - NET_IPV6_IP6FRAG_SECRET_INTERVAL=24, - NET_IPV6_MLD_MAX_MSF=25, -}; - -enum { - NET_IPV6_ROUTE_FLUSH=1, - NET_IPV6_ROUTE_GC_THRESH=2, - NET_IPV6_ROUTE_MAX_SIZE=3, - NET_IPV6_ROUTE_GC_MIN_INTERVAL=4, - NET_IPV6_ROUTE_GC_TIMEOUT=5, - NET_IPV6_ROUTE_GC_INTERVAL=6, - NET_IPV6_ROUTE_GC_ELASTICITY=7, - NET_IPV6_ROUTE_MTU_EXPIRES=8, - NET_IPV6_ROUTE_MIN_ADVMSS=9, - NET_IPV6_ROUTE_GC_MIN_INTERVAL_MS=10 -}; - -enum { - NET_IPV6_FORWARDING=1, - NET_IPV6_HOP_LIMIT=2, - NET_IPV6_MTU=3, - NET_IPV6_ACCEPT_RA=4, - NET_IPV6_ACCEPT_REDIRECTS=5, - NET_IPV6_AUTOCONF=6, - NET_IPV6_DAD_TRANSMITS=7, - NET_IPV6_RTR_SOLICITS=8, - NET_IPV6_RTR_SOLICIT_INTERVAL=9, - NET_IPV6_RTR_SOLICIT_DELAY=10, - NET_IPV6_USE_TEMPADDR=11, - NET_IPV6_TEMP_VALID_LFT=12, - NET_IPV6_TEMP_PREFERED_LFT=13, - NET_IPV6_REGEN_MAX_RETRY=14, - NET_IPV6_MAX_DESYNC_FACTOR=15, - NET_IPV6_MAX_ADDRESSES=16, - NET_IPV6_FORCE_MLD_VERSION=17, - NET_IPV6_ACCEPT_RA_DEFRTR=18, - NET_IPV6_ACCEPT_RA_PINFO=19, - NET_IPV6_ACCEPT_RA_RTR_PREF=20, - NET_IPV6_RTR_PROBE_INTERVAL=21, - NET_IPV6_ACCEPT_RA_RT_INFO_MAX_PLEN=22, - NET_IPV6_PROXY_NDP=23, - NET_IPV6_ACCEPT_SOURCE_ROUTE=25, - __NET_IPV6_MAX -}; - -/* /proc/sys/net/ipv6/icmp */ -enum { - NET_IPV6_ICMP_RATELIMIT=1 -}; - -/* /proc/sys/net/<protocol>/neigh/<dev> */ -enum { - NET_NEIGH_MCAST_SOLICIT=1, - NET_NEIGH_UCAST_SOLICIT=2, - NET_NEIGH_APP_SOLICIT=3, - NET_NEIGH_RETRANS_TIME=4, - NET_NEIGH_REACHABLE_TIME=5, - NET_NEIGH_DELAY_PROBE_TIME=6, - NET_NEIGH_GC_STALE_TIME=7, - NET_NEIGH_UNRES_QLEN=8, - NET_NEIGH_PROXY_QLEN=9, - NET_NEIGH_ANYCAST_DELAY=10, - NET_NEIGH_PROXY_DELAY=11, - NET_NEIGH_LOCKTIME=12, - NET_NEIGH_GC_INTERVAL=13, - NET_NEIGH_GC_THRESH1=14, - NET_NEIGH_GC_THRESH2=15, - NET_NEIGH_GC_THRESH3=16, - NET_NEIGH_RETRANS_TIME_MS=17, - NET_NEIGH_REACHABLE_TIME_MS=18, -}; - -/* /proc/sys/net/dccp */ -enum { - NET_DCCP_DEFAULT=1, -}; - -/* /proc/sys/net/ipx */ -enum { - NET_IPX_PPROP_BROADCASTING=1, - NET_IPX_FORWARDING=2 -}; - -/* /proc/sys/net/llc */ -enum { - NET_LLC2=1, - NET_LLC_STATION=2, -}; - -/* /proc/sys/net/llc/llc2 */ -enum { - NET_LLC2_TIMEOUT=1, -}; - -/* /proc/sys/net/llc/station */ -enum { - NET_LLC_STATION_ACK_TIMEOUT=1, -}; - -/* /proc/sys/net/llc/llc2/timeout */ -enum { - NET_LLC2_ACK_TIMEOUT=1, - NET_LLC2_P_TIMEOUT=2, - NET_LLC2_REJ_TIMEOUT=3, - NET_LLC2_BUSY_TIMEOUT=4, -}; - -/* /proc/sys/net/appletalk */ -enum { - NET_ATALK_AARP_EXPIRY_TIME=1, - NET_ATALK_AARP_TICK_TIME=2, - NET_ATALK_AARP_RETRANSMIT_LIMIT=3, - NET_ATALK_AARP_RESOLVE_TIME=4 -}; - - -/* /proc/sys/net/netrom */ -enum { - NET_NETROM_DEFAULT_PATH_QUALITY=1, - NET_NETROM_OBSOLESCENCE_COUNT_INITIALISER=2, - NET_NETROM_NETWORK_TTL_INITIALISER=3, - NET_NETROM_TRANSPORT_TIMEOUT=4, - NET_NETROM_TRANSPORT_MAXIMUM_TRIES=5, - NET_NETROM_TRANSPORT_ACKNOWLEDGE_DELAY=6, - NET_NETROM_TRANSPORT_BUSY_DELAY=7, - NET_NETROM_TRANSPORT_REQUESTED_WINDOW_SIZE=8, - NET_NETROM_TRANSPORT_NO_ACTIVITY_TIMEOUT=9, - NET_NETROM_ROUTING_CONTROL=10, - NET_NETROM_LINK_FAILS_COUNT=11, - NET_NETROM_RESET=12 -}; - -/* /proc/sys/net/ax25 */ -enum { - NET_AX25_IP_DEFAULT_MODE=1, - NET_AX25_DEFAULT_MODE=2, - NET_AX25_BACKOFF_TYPE=3, - NET_AX25_CONNECT_MODE=4, - NET_AX25_STANDARD_WINDOW=5, - NET_AX25_EXTENDED_WINDOW=6, - NET_AX25_T1_TIMEOUT=7, - NET_AX25_T2_TIMEOUT=8, - NET_AX25_T3_TIMEOUT=9, - NET_AX25_IDLE_TIMEOUT=10, - NET_AX25_N2=11, - NET_AX25_PACLEN=12, - NET_AX25_PROTOCOL=13, - NET_AX25_DAMA_SLAVE_TIMEOUT=14 -}; - -/* /proc/sys/net/rose */ -enum { - NET_ROSE_RESTART_REQUEST_TIMEOUT=1, - NET_ROSE_CALL_REQUEST_TIMEOUT=2, - NET_ROSE_RESET_REQUEST_TIMEOUT=3, - NET_ROSE_CLEAR_REQUEST_TIMEOUT=4, - NET_ROSE_ACK_HOLD_BACK_TIMEOUT=5, - NET_ROSE_ROUTING_CONTROL=6, - NET_ROSE_LINK_FAIL_TIMEOUT=7, - NET_ROSE_MAX_VCS=8, - NET_ROSE_WINDOW_SIZE=9, - NET_ROSE_NO_ACTIVITY_TIMEOUT=10 -}; - -/* /proc/sys/net/x25 */ -enum { - NET_X25_RESTART_REQUEST_TIMEOUT=1, - NET_X25_CALL_REQUEST_TIMEOUT=2, - NET_X25_RESET_REQUEST_TIMEOUT=3, - NET_X25_CLEAR_REQUEST_TIMEOUT=4, - NET_X25_ACK_HOLD_BACK_TIMEOUT=5, - NET_X25_FORWARD=6 -}; - -/* /proc/sys/net/token-ring */ -enum -{ - NET_TR_RIF_TIMEOUT=1 -}; - -/* /proc/sys/net/decnet/ */ -enum { - NET_DECNET_NODE_TYPE = 1, - NET_DECNET_NODE_ADDRESS = 2, - NET_DECNET_NODE_NAME = 3, - NET_DECNET_DEFAULT_DEVICE = 4, - NET_DECNET_TIME_WAIT = 5, - NET_DECNET_DN_COUNT = 6, - NET_DECNET_DI_COUNT = 7, - NET_DECNET_DR_COUNT = 8, - NET_DECNET_DST_GC_INTERVAL = 9, - NET_DECNET_CONF = 10, - NET_DECNET_NO_FC_MAX_CWND = 11, - NET_DECNET_MEM = 12, - NET_DECNET_RMEM = 13, - NET_DECNET_WMEM = 14, - NET_DECNET_DEBUG_LEVEL = 255 -}; - -/* /proc/sys/net/decnet/conf/<dev> */ -enum { - NET_DECNET_CONF_LOOPBACK = -2, - NET_DECNET_CONF_DDCMP = -3, - NET_DECNET_CONF_PPP = -4, - NET_DECNET_CONF_X25 = -5, - NET_DECNET_CONF_GRE = -6, - NET_DECNET_CONF_ETHER = -7 - - /* ... and ifindex of devices */ -}; - -/* /proc/sys/net/decnet/conf/<dev>/ */ -enum { - NET_DECNET_CONF_DEV_PRIORITY = 1, - NET_DECNET_CONF_DEV_T1 = 2, - NET_DECNET_CONF_DEV_T2 = 3, - NET_DECNET_CONF_DEV_T3 = 4, - NET_DECNET_CONF_DEV_FORWARDING = 5, - NET_DECNET_CONF_DEV_BLKSIZE = 6, - NET_DECNET_CONF_DEV_STATE = 7 -}; - -/* /proc/sys/net/sctp */ -enum { - NET_SCTP_RTO_INITIAL = 1, - NET_SCTP_RTO_MIN = 2, - NET_SCTP_RTO_MAX = 3, - NET_SCTP_RTO_ALPHA = 4, - NET_SCTP_RTO_BETA = 5, - NET_SCTP_VALID_COOKIE_LIFE = 6, - NET_SCTP_ASSOCIATION_MAX_RETRANS = 7, - NET_SCTP_PATH_MAX_RETRANS = 8, - NET_SCTP_MAX_INIT_RETRANSMITS = 9, - NET_SCTP_HB_INTERVAL = 10, - NET_SCTP_PRESERVE_ENABLE = 11, - NET_SCTP_MAX_BURST = 12, - NET_SCTP_ADDIP_ENABLE = 13, - NET_SCTP_PRSCTP_ENABLE = 14, - NET_SCTP_SNDBUF_POLICY = 15, - NET_SCTP_SACK_TIMEOUT = 16, - NET_SCTP_RCVBUF_POLICY = 17, -}; - -/* /proc/sys/net/bridge */ -enum { - NET_BRIDGE_NF_CALL_ARPTABLES = 1, - NET_BRIDGE_NF_CALL_IPTABLES = 2, - NET_BRIDGE_NF_CALL_IP6TABLES = 3, - NET_BRIDGE_NF_FILTER_VLAN_TAGGED = 4, - NET_BRIDGE_NF_FILTER_PPPOE_TAGGED = 5, -}; - -/* proc/sys/net/irda */ -enum { - NET_IRDA_DISCOVERY=1, - NET_IRDA_DEVNAME=2, - NET_IRDA_DEBUG=3, - NET_IRDA_FAST_POLL=4, - NET_IRDA_DISCOVERY_SLOTS=5, - NET_IRDA_DISCOVERY_TIMEOUT=6, - NET_IRDA_SLOT_TIMEOUT=7, - NET_IRDA_MAX_BAUD_RATE=8, - NET_IRDA_MIN_TX_TURN_TIME=9, - NET_IRDA_MAX_TX_DATA_SIZE=10, - NET_IRDA_MAX_TX_WINDOW=11, - NET_IRDA_MAX_NOREPLY_TIME=12, - NET_IRDA_WARN_NOREPLY_TIME=13, - NET_IRDA_LAP_KEEPALIVE_TIME=14, -}; - - -/* CTL_FS names: */ -enum -{ - FS_NRINODE=1, /* int:current number of allocated inodes */ - FS_STATINODE=2, - FS_MAXINODE=3, /* int:maximum number of inodes that can be allocated */ - FS_NRDQUOT=4, /* int:current number of allocated dquots */ - FS_MAXDQUOT=5, /* int:maximum number of dquots that can be allocated */ - FS_NRFILE=6, /* int:current number of allocated filedescriptors */ - FS_MAXFILE=7, /* int:maximum number of filedescriptors that can be allocated */ - FS_DENTRY=8, - FS_NRSUPER=9, /* int:current number of allocated super_blocks */ - FS_MAXSUPER=10, /* int:maximum number of super_blocks that can be allocated */ - FS_OVERFLOWUID=11, /* int: overflow UID */ - FS_OVERFLOWGID=12, /* int: overflow GID */ - FS_LEASES=13, /* int: leases enabled */ - FS_DIR_NOTIFY=14, /* int: directory notification enabled */ - FS_LEASE_TIME=15, /* int: maximum time to wait for a lease break */ - FS_DQSTATS=16, /* disc quota usage statistics and control */ - FS_XFS=17, /* struct: control xfs parameters */ - FS_AIO_NR=18, /* current system-wide number of aio requests */ - FS_AIO_MAX_NR=19, /* system-wide maximum number of aio requests */ - FS_INOTIFY=20, /* inotify submenu */ - FS_OCFS2=988, /* ocfs2 */ -}; - -/* /proc/sys/fs/quota/ */ -enum { - FS_DQ_LOOKUPS = 1, - FS_DQ_DROPS = 2, - FS_DQ_READS = 3, - FS_DQ_WRITES = 4, - FS_DQ_CACHE_HITS = 5, - FS_DQ_ALLOCATED = 6, - FS_DQ_FREE = 7, - FS_DQ_SYNCS = 8, - FS_DQ_WARNINGS = 9, -}; - -/* CTL_DEBUG names: */ - -/* CTL_DEV names: */ -enum { - DEV_CDROM=1, - DEV_HWMON=2, - DEV_PARPORT=3, - DEV_RAID=4, - DEV_MAC_HID=5, - DEV_SCSI=6, - DEV_IPMI=7, -}; - -/* /proc/sys/dev/cdrom */ -enum { - DEV_CDROM_INFO=1, - DEV_CDROM_AUTOCLOSE=2, - DEV_CDROM_AUTOEJECT=3, - DEV_CDROM_DEBUG=4, - DEV_CDROM_LOCK=5, - DEV_CDROM_CHECK_MEDIA=6 -}; - -/* /proc/sys/dev/parport */ -enum { - DEV_PARPORT_DEFAULT=-3 -}; - -/* /proc/sys/dev/raid */ -enum { - DEV_RAID_SPEED_LIMIT_MIN=1, - DEV_RAID_SPEED_LIMIT_MAX=2 -}; - -/* /proc/sys/dev/parport/default */ -enum { - DEV_PARPORT_DEFAULT_TIMESLICE=1, - DEV_PARPORT_DEFAULT_SPINTIME=2 -}; - -/* /proc/sys/dev/parport/parport n */ -enum { - DEV_PARPORT_SPINTIME=1, - DEV_PARPORT_BASE_ADDR=2, - DEV_PARPORT_IRQ=3, - DEV_PARPORT_DMA=4, - DEV_PARPORT_MODES=5, - DEV_PARPORT_DEVICES=6, - DEV_PARPORT_AUTOPROBE=16 -}; - -/* /proc/sys/dev/parport/parport n/devices/ */ -enum { - DEV_PARPORT_DEVICES_ACTIVE=-3, -}; - -/* /proc/sys/dev/parport/parport n/devices/device n */ -enum { - DEV_PARPORT_DEVICE_TIMESLICE=1, -}; - -/* /proc/sys/dev/mac_hid */ -enum { - DEV_MAC_HID_KEYBOARD_SENDS_LINUX_KEYCODES=1, - DEV_MAC_HID_KEYBOARD_LOCK_KEYCODES=2, - DEV_MAC_HID_MOUSE_BUTTON_EMULATION=3, - DEV_MAC_HID_MOUSE_BUTTON2_KEYCODE=4, - DEV_MAC_HID_MOUSE_BUTTON3_KEYCODE=5, - DEV_MAC_HID_ADB_MOUSE_SENDS_KEYCODES=6 -}; - -/* /proc/sys/dev/scsi */ -enum { - DEV_SCSI_LOGGING_LEVEL=1, -}; - -/* /proc/sys/dev/ipmi */ -enum { - DEV_IPMI_POWEROFF_POWERCYCLE=1, -}; - -/* /proc/sys/abi */ -enum -{ - ABI_DEFHANDLER_COFF=1, /* default handler for coff binaries */ - ABI_DEFHANDLER_ELF=2, /* default handler for ELF binaries */ - ABI_DEFHANDLER_LCALL7=3,/* default handler for procs using lcall7 */ - ABI_DEFHANDLER_LIBCSO=4,/* default handler for an libc.so ELF interp */ - ABI_TRACE=5, /* tracing flags */ - ABI_FAKE_UTSNAME=6, /* fake target utsname information */ -}; - -#ifdef __KERNEL__ #include <linux/list.h> #include <linux/rcupdate.h> #include <linux/wait.h> #include <linux/rbtree.h> +#include <uapi/linux/sysctl.h> /* For the /proc/sys support */ struct ctl_table; @@ -1122,6 +215,4 @@ static inline void setup_sysctl_set(struct ctl_table_set *p, #endif /* CONFIG_SYSCTL */ -#endif /* __KERNEL__ */ - #endif /* _LINUX_SYSCTL_H */ diff --git a/include/linux/tcp.h b/include/linux/tcp.h index 67c789ae719..8a7fc4be2d7 100644 --- a/include/linux/tcp.h +++ b/include/linux/tcp.h @@ -17,217 +17,13 @@ #ifndef _LINUX_TCP_H #define _LINUX_TCP_H -#include <linux/types.h> -#include <asm/byteorder.h> -#include <linux/socket.h> - -struct tcphdr { - __be16 source; - __be16 dest; - __be32 seq; - __be32 ack_seq; -#if defined(__LITTLE_ENDIAN_BITFIELD) - __u16 res1:4, - doff:4, - fin:1, - syn:1, - rst:1, - psh:1, - ack:1, - urg:1, - ece:1, - cwr:1; -#elif defined(__BIG_ENDIAN_BITFIELD) - __u16 doff:4, - res1:4, - cwr:1, - ece:1, - urg:1, - ack:1, - psh:1, - rst:1, - syn:1, - fin:1; -#else -#error "Adjust your <asm/byteorder.h> defines" -#endif - __be16 window; - __sum16 check; - __be16 urg_ptr; -}; - -/* - * The union cast uses a gcc extension to avoid aliasing problems - * (union is compatible to any of its members) - * This means this part of the code is -fstrict-aliasing safe now. - */ -union tcp_word_hdr { - struct tcphdr hdr; - __be32 words[5]; -}; - -#define tcp_flag_word(tp) ( ((union tcp_word_hdr *)(tp))->words [3]) - -enum { - TCP_FLAG_CWR = __constant_cpu_to_be32(0x00800000), - TCP_FLAG_ECE = __constant_cpu_to_be32(0x00400000), - TCP_FLAG_URG = __constant_cpu_to_be32(0x00200000), - TCP_FLAG_ACK = __constant_cpu_to_be32(0x00100000), - TCP_FLAG_PSH = __constant_cpu_to_be32(0x00080000), - TCP_FLAG_RST = __constant_cpu_to_be32(0x00040000), - TCP_FLAG_SYN = __constant_cpu_to_be32(0x00020000), - TCP_FLAG_FIN = __constant_cpu_to_be32(0x00010000), - TCP_RESERVED_BITS = __constant_cpu_to_be32(0x0F000000), - TCP_DATA_OFFSET = __constant_cpu_to_be32(0xF0000000) -}; - -/* - * TCP general constants - */ -#define TCP_MSS_DEFAULT 536U /* IPv4 (RFC1122, RFC2581) */ -#define TCP_MSS_DESIRED 1220U /* IPv6 (tunneled), EDNS0 (RFC3226) */ - -/* TCP socket options */ -#define TCP_NODELAY 1 /* Turn off Nagle's algorithm. */ -#define TCP_MAXSEG 2 /* Limit MSS */ -#define TCP_CORK 3 /* Never send partially complete segments */ -#define TCP_KEEPIDLE 4 /* Start keeplives after this period */ -#define TCP_KEEPINTVL 5 /* Interval between keepalives */ -#define TCP_KEEPCNT 6 /* Number of keepalives before death */ -#define TCP_SYNCNT 7 /* Number of SYN retransmits */ -#define TCP_LINGER2 8 /* Life time of orphaned FIN-WAIT-2 state */ -#define TCP_DEFER_ACCEPT 9 /* Wake up listener only when data arrive */ -#define TCP_WINDOW_CLAMP 10 /* Bound advertised window */ -#define TCP_INFO 11 /* Information about this connection. */ -#define TCP_QUICKACK 12 /* Block/reenable quick acks */ -#define TCP_CONGESTION 13 /* Congestion control algorithm */ -#define TCP_MD5SIG 14 /* TCP MD5 Signature (RFC2385) */ -#define TCP_COOKIE_TRANSACTIONS 15 /* TCP Cookie Transactions */ -#define TCP_THIN_LINEAR_TIMEOUTS 16 /* Use linear timeouts for thin streams*/ -#define TCP_THIN_DUPACK 17 /* Fast retrans. after 1 dupack */ -#define TCP_USER_TIMEOUT 18 /* How long for loss retry before timeout */ -#define TCP_REPAIR 19 /* TCP sock is under repair right now */ -#define TCP_REPAIR_QUEUE 20 -#define TCP_QUEUE_SEQ 21 -#define TCP_REPAIR_OPTIONS 22 -#define TCP_FASTOPEN 23 /* Enable FastOpen on listeners */ - -struct tcp_repair_opt { - __u32 opt_code; - __u32 opt_val; -}; - -enum { - TCP_NO_QUEUE, - TCP_RECV_QUEUE, - TCP_SEND_QUEUE, - TCP_QUEUES_NR, -}; - -/* for TCP_INFO socket option */ -#define TCPI_OPT_TIMESTAMPS 1 -#define TCPI_OPT_SACK 2 -#define TCPI_OPT_WSCALE 4 -#define TCPI_OPT_ECN 8 /* ECN was negociated at TCP session init */ -#define TCPI_OPT_ECN_SEEN 16 /* we received at least one packet with ECT */ - -enum tcp_ca_state { - TCP_CA_Open = 0, -#define TCPF_CA_Open (1<<TCP_CA_Open) - TCP_CA_Disorder = 1, -#define TCPF_CA_Disorder (1<<TCP_CA_Disorder) - TCP_CA_CWR = 2, -#define TCPF_CA_CWR (1<<TCP_CA_CWR) - TCP_CA_Recovery = 3, -#define TCPF_CA_Recovery (1<<TCP_CA_Recovery) - TCP_CA_Loss = 4 -#define TCPF_CA_Loss (1<<TCP_CA_Loss) -}; - -struct tcp_info { - __u8 tcpi_state; - __u8 tcpi_ca_state; - __u8 tcpi_retransmits; - __u8 tcpi_probes; - __u8 tcpi_backoff; - __u8 tcpi_options; - __u8 tcpi_snd_wscale : 4, tcpi_rcv_wscale : 4; - - __u32 tcpi_rto; - __u32 tcpi_ato; - __u32 tcpi_snd_mss; - __u32 tcpi_rcv_mss; - - __u32 tcpi_unacked; - __u32 tcpi_sacked; - __u32 tcpi_lost; - __u32 tcpi_retrans; - __u32 tcpi_fackets; - - /* Times. */ - __u32 tcpi_last_data_sent; - __u32 tcpi_last_ack_sent; /* Not remembered, sorry. */ - __u32 tcpi_last_data_recv; - __u32 tcpi_last_ack_recv; - - /* Metrics. */ - __u32 tcpi_pmtu; - __u32 tcpi_rcv_ssthresh; - __u32 tcpi_rtt; - __u32 tcpi_rttvar; - __u32 tcpi_snd_ssthresh; - __u32 tcpi_snd_cwnd; - __u32 tcpi_advmss; - __u32 tcpi_reordering; - - __u32 tcpi_rcv_rtt; - __u32 tcpi_rcv_space; - - __u32 tcpi_total_retrans; -}; - -/* for TCP_MD5SIG socket option */ -#define TCP_MD5SIG_MAXKEYLEN 80 - -struct tcp_md5sig { - struct __kernel_sockaddr_storage tcpm_addr; /* address associated */ - __u16 __tcpm_pad1; /* zero */ - __u16 tcpm_keylen; /* key length */ - __u32 __tcpm_pad2; /* zero */ - __u8 tcpm_key[TCP_MD5SIG_MAXKEYLEN]; /* key (binary) */ -}; - -/* for TCP_COOKIE_TRANSACTIONS (TCPCT) socket option */ -#define TCP_COOKIE_MIN 8 /* 64-bits */ -#define TCP_COOKIE_MAX 16 /* 128-bits */ -#define TCP_COOKIE_PAIR_SIZE (2*TCP_COOKIE_MAX) - -/* Flags for both getsockopt and setsockopt */ -#define TCP_COOKIE_IN_ALWAYS (1 << 0) /* Discard SYN without cookie */ -#define TCP_COOKIE_OUT_NEVER (1 << 1) /* Prohibit outgoing cookies, - * supercedes everything. */ - -/* Flags for getsockopt */ -#define TCP_S_DATA_IN (1 << 2) /* Was data received? */ -#define TCP_S_DATA_OUT (1 << 3) /* Was data sent? */ - -/* TCP_COOKIE_TRANSACTIONS data */ -struct tcp_cookie_transactions { - __u16 tcpct_flags; /* see above */ - __u8 __tcpct_pad1; /* zero */ - __u8 tcpct_cookie_desired; /* bytes */ - __u16 tcpct_s_data_desired; /* bytes of variable data */ - __u16 tcpct_used; /* bytes in value */ - __u8 tcpct_value[TCP_MSS_DEFAULT]; -}; - -#ifdef __KERNEL__ #include <linux/skbuff.h> #include <linux/dmaengine.h> #include <net/sock.h> #include <net/inet_connection_sock.h> #include <net/inet_timewait_sock.h> +#include <uapi/linux/tcp.h> static inline struct tcphdr *tcp_hdr(const struct sk_buff *skb) { @@ -595,6 +391,4 @@ static inline int fastopen_init_queue(struct sock *sk, int backlog) return 0; } -#endif /* __KERNEL__ */ - #endif /* _LINUX_TCP_H */ diff --git a/include/linux/thermal.h b/include/linux/thermal.h index 4b94a61955d..91b34812cd8 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -44,6 +44,12 @@ enum thermal_trip_type { THERMAL_TRIP_CRITICAL, }; +enum thermal_trend { + THERMAL_TREND_STABLE, /* temperature is stable */ + THERMAL_TREND_RAISING, /* temperature is raising */ + THERMAL_TREND_DROPPING, /* temperature is dropping */ +}; + struct thermal_zone_device_ops { int (*bind) (struct thermal_zone_device *, struct thermal_cooling_device *); @@ -65,6 +71,8 @@ struct thermal_zone_device_ops { int (*set_trip_hyst) (struct thermal_zone_device *, int, unsigned long); int (*get_crit_temp) (struct thermal_zone_device *, unsigned long *); + int (*get_trend) (struct thermal_zone_device *, int, + enum thermal_trend *); int (*notify) (struct thermal_zone_device *, int, enum thermal_trip_type); }; @@ -75,6 +83,8 @@ struct thermal_cooling_device_ops { int (*set_cur_state) (struct thermal_cooling_device *, unsigned long); }; +#define THERMAL_NO_LIMIT -1UL /* no upper/lower limit requirement */ + #define THERMAL_TRIPS_NONE -1 #define THERMAL_MAX_TRIPS 12 #define THERMAL_NAME_LENGTH 20 @@ -84,6 +94,9 @@ struct thermal_cooling_device { struct device device; void *devdata; const struct thermal_cooling_device_ops *ops; + bool updated; /* true if the cooling device does not need update */ + struct mutex lock; /* protect thermal_instances list */ + struct list_head thermal_instances; struct list_head node; }; @@ -105,17 +118,16 @@ struct thermal_zone_device { struct thermal_attr *trip_hyst_attrs; void *devdata; int trips; - int tc1; - int tc2; int passive_delay; int polling_delay; + int temperature; int last_temperature; - bool passive; + int passive; unsigned int forced_passive; const struct thermal_zone_device_ops *ops; - struct list_head cooling_devices; + struct list_head thermal_instances; struct idr idr; - struct mutex lock; /* protect cooling devices list */ + struct mutex lock; /* protect thermal_instances list */ struct list_head node; struct delayed_work poll_queue; }; @@ -152,12 +164,12 @@ enum { #define THERMAL_GENL_CMD_MAX (__THERMAL_GENL_CMD_MAX - 1) struct thermal_zone_device *thermal_zone_device_register(const char *, int, int, - void *, const struct thermal_zone_device_ops *, int tc1, - int tc2, int passive_freq, int polling_freq); + void *, const struct thermal_zone_device_ops *, int, int); void thermal_zone_device_unregister(struct thermal_zone_device *); int thermal_zone_bind_cooling_device(struct thermal_zone_device *, int, - struct thermal_cooling_device *); + struct thermal_cooling_device *, + unsigned long, unsigned long); int thermal_zone_unbind_cooling_device(struct thermal_zone_device *, int, struct thermal_cooling_device *); void thermal_zone_device_update(struct thermal_zone_device *); diff --git a/include/linux/time.h b/include/linux/time.h index b51e664c83e..4d358e9d10f 100644 --- a/include/linux/time.h +++ b/include/linux/time.h @@ -1,33 +1,10 @@ #ifndef _LINUX_TIME_H #define _LINUX_TIME_H -#include <linux/types.h> - -#ifdef __KERNEL__ # include <linux/cache.h> # include <linux/seqlock.h> # include <linux/math64.h> -#endif - -#ifndef _STRUCT_TIMESPEC -#define _STRUCT_TIMESPEC -struct timespec { - __kernel_time_t tv_sec; /* seconds */ - long tv_nsec; /* nanoseconds */ -}; -#endif - -struct timeval { - __kernel_time_t tv_sec; /* seconds */ - __kernel_suseconds_t tv_usec; /* microseconds */ -}; - -struct timezone { - int tz_minuteswest; /* minutes west of Greenwich */ - int tz_dsttime; /* type of dst correction */ -}; - -#ifdef __KERNEL__ +#include <uapi/linux/time.h> extern struct timezone sys_tz; @@ -280,51 +257,4 @@ static __always_inline void timespec_add_ns(struct timespec *a, u64 ns) a->tv_nsec = ns; } -#endif /* __KERNEL__ */ - -/* - * Names of the interval timers, and structure - * defining a timer setting: - */ -#define ITIMER_REAL 0 -#define ITIMER_VIRTUAL 1 -#define ITIMER_PROF 2 - -struct itimerspec { - struct timespec it_interval; /* timer period */ - struct timespec it_value; /* timer expiration */ -}; - -struct itimerval { - struct timeval it_interval; /* timer interval */ - struct timeval it_value; /* current value */ -}; - -/* - * The IDs of the various system clocks (for POSIX.1b interval timers): - */ -#define CLOCK_REALTIME 0 -#define CLOCK_MONOTONIC 1 -#define CLOCK_PROCESS_CPUTIME_ID 2 -#define CLOCK_THREAD_CPUTIME_ID 3 -#define CLOCK_MONOTONIC_RAW 4 -#define CLOCK_REALTIME_COARSE 5 -#define CLOCK_MONOTONIC_COARSE 6 -#define CLOCK_BOOTTIME 7 -#define CLOCK_REALTIME_ALARM 8 -#define CLOCK_BOOTTIME_ALARM 9 - -/* - * The IDs of various hardware clocks: - */ -#define CLOCK_SGI_CYCLE 10 -#define MAX_CLOCKS 16 -#define CLOCKS_MASK (CLOCK_REALTIME | CLOCK_MONOTONIC) -#define CLOCKS_MONO CLOCK_MONOTONIC - -/* - * The various flags for setting POSIX.1b interval timers: - */ -#define TIMER_ABSTIME 0x01 - #endif diff --git a/include/linux/timekeeper_internal.h b/include/linux/timekeeper_internal.h new file mode 100644 index 00000000000..e1d558e237e --- /dev/null +++ b/include/linux/timekeeper_internal.h @@ -0,0 +1,108 @@ +/* + * You SHOULD NOT be including this unless you're vsyscall + * handling code or timekeeping internal code! + */ + +#ifndef _LINUX_TIMEKEEPER_INTERNAL_H +#define _LINUX_TIMEKEEPER_INTERNAL_H + +#include <linux/clocksource.h> +#include <linux/jiffies.h> +#include <linux/time.h> + +/* Structure holding internal timekeeping values. */ +struct timekeeper { + /* Current clocksource used for timekeeping. */ + struct clocksource *clock; + /* NTP adjusted clock multiplier */ + u32 mult; + /* The shift value of the current clocksource. */ + u32 shift; + /* Number of clock cycles in one NTP interval. */ + cycle_t cycle_interval; + /* Number of clock shifted nano seconds in one NTP interval. */ + u64 xtime_interval; + /* shifted nano seconds left over when rounding cycle_interval */ + s64 xtime_remainder; + /* Raw nano seconds accumulated per NTP interval. */ + u32 raw_interval; + + /* Current CLOCK_REALTIME time in seconds */ + u64 xtime_sec; + /* Clock shifted nano seconds */ + u64 xtime_nsec; + + /* Difference between accumulated time and NTP time in ntp + * shifted nano seconds. */ + s64 ntp_error; + /* Shift conversion between clock shifted nano seconds and + * ntp shifted nano seconds. */ + u32 ntp_error_shift; + + /* + * wall_to_monotonic is what we need to add to xtime (or xtime corrected + * for sub jiffie times) to get to monotonic time. Monotonic is pegged + * at zero at system boot time, so wall_to_monotonic will be negative, + * however, we will ALWAYS keep the tv_nsec part positive so we can use + * the usual normalization. + * + * wall_to_monotonic is moved after resume from suspend for the + * monotonic time not to jump. We need to add total_sleep_time to + * wall_to_monotonic to get the real boot based time offset. + * + * - wall_to_monotonic is no longer the boot time, getboottime must be + * used instead. + */ + struct timespec wall_to_monotonic; + /* Offset clock monotonic -> clock realtime */ + ktime_t offs_real; + /* time spent in suspend */ + struct timespec total_sleep_time; + /* Offset clock monotonic -> clock boottime */ + ktime_t offs_boot; + /* The raw monotonic time for the CLOCK_MONOTONIC_RAW posix clock. */ + struct timespec raw_time; + /* Seqlock for all timekeeper values */ + seqlock_t lock; +}; + +static inline struct timespec tk_xtime(struct timekeeper *tk) +{ + struct timespec ts; + + ts.tv_sec = tk->xtime_sec; + ts.tv_nsec = (long)(tk->xtime_nsec >> tk->shift); + return ts; +} + + +#ifdef CONFIG_GENERIC_TIME_VSYSCALL + +extern void update_vsyscall(struct timekeeper *tk); +extern void update_vsyscall_tz(void); + +#elif defined(CONFIG_GENERIC_TIME_VSYSCALL_OLD) + +extern void update_vsyscall_old(struct timespec *ts, struct timespec *wtm, + struct clocksource *c, u32 mult); +extern void update_vsyscall_tz(void); + +static inline void update_vsyscall(struct timekeeper *tk) +{ + struct timespec xt; + + xt = tk_xtime(tk); + update_vsyscall_old(&xt, &tk->wall_to_monotonic, tk->clock, tk->mult); +} + +#else + +static inline void update_vsyscall(struct timekeeper *tk) +{ +} +static inline void update_vsyscall_tz(void) +{ +} +#endif + +#endif /* _LINUX_TIMEKEEPER_INTERNAL_H */ diff --git a/include/linux/timex.h b/include/linux/timex.h index 7c5ceb20e03..5ec87c60b97 100644 --- a/include/linux/timex.h +++ b/include/linux/timex.h @@ -53,120 +53,11 @@ #ifndef _LINUX_TIMEX_H #define _LINUX_TIMEX_H -#include <linux/time.h> +#include <uapi/linux/timex.h> -#define NTP_API 4 /* NTP API version */ - -/* - * syscall interface - used (mainly by NTP daemon) - * to discipline kernel clock oscillator - */ -struct timex { - unsigned int modes; /* mode selector */ - long offset; /* time offset (usec) */ - long freq; /* frequency offset (scaled ppm) */ - long maxerror; /* maximum error (usec) */ - long esterror; /* estimated error (usec) */ - int status; /* clock command/status */ - long constant; /* pll time constant */ - long precision; /* clock precision (usec) (read only) */ - long tolerance; /* clock frequency tolerance (ppm) - * (read only) - */ - struct timeval time; /* (read only, except for ADJ_SETOFFSET) */ - long tick; /* (modified) usecs between clock ticks */ - - long ppsfreq; /* pps frequency (scaled ppm) (ro) */ - long jitter; /* pps jitter (us) (ro) */ - int shift; /* interval duration (s) (shift) (ro) */ - long stabil; /* pps stability (scaled ppm) (ro) */ - long jitcnt; /* jitter limit exceeded (ro) */ - long calcnt; /* calibration intervals (ro) */ - long errcnt; /* calibration errors (ro) */ - long stbcnt; /* stability limit exceeded (ro) */ - - int tai; /* TAI offset (ro) */ - - int :32; int :32; int :32; int :32; - int :32; int :32; int :32; int :32; - int :32; int :32; int :32; -}; - -/* - * Mode codes (timex.mode) - */ -#define ADJ_OFFSET 0x0001 /* time offset */ -#define ADJ_FREQUENCY 0x0002 /* frequency offset */ -#define ADJ_MAXERROR 0x0004 /* maximum time error */ -#define ADJ_ESTERROR 0x0008 /* estimated time error */ -#define ADJ_STATUS 0x0010 /* clock status */ -#define ADJ_TIMECONST 0x0020 /* pll time constant */ -#define ADJ_TAI 0x0080 /* set TAI offset */ -#define ADJ_SETOFFSET 0x0100 /* add 'time' to current time */ -#define ADJ_MICRO 0x1000 /* select microsecond resolution */ -#define ADJ_NANO 0x2000 /* select nanosecond resolution */ -#define ADJ_TICK 0x4000 /* tick value */ - -#ifdef __KERNEL__ #define ADJ_ADJTIME 0x8000 /* switch between adjtime/adjtimex modes */ #define ADJ_OFFSET_SINGLESHOT 0x0001 /* old-fashioned adjtime */ #define ADJ_OFFSET_READONLY 0x2000 /* read-only adjtime */ -#else -#define ADJ_OFFSET_SINGLESHOT 0x8001 /* old-fashioned adjtime */ -#define ADJ_OFFSET_SS_READ 0xa001 /* read-only adjtime */ -#endif - -/* NTP userland likes the MOD_ prefix better */ -#define MOD_OFFSET ADJ_OFFSET -#define MOD_FREQUENCY ADJ_FREQUENCY -#define MOD_MAXERROR ADJ_MAXERROR -#define MOD_ESTERROR ADJ_ESTERROR -#define MOD_STATUS ADJ_STATUS -#define MOD_TIMECONST ADJ_TIMECONST -#define MOD_TAI ADJ_TAI -#define MOD_MICRO ADJ_MICRO -#define MOD_NANO ADJ_NANO - - -/* - * Status codes (timex.status) - */ -#define STA_PLL 0x0001 /* enable PLL updates (rw) */ -#define STA_PPSFREQ 0x0002 /* enable PPS freq discipline (rw) */ -#define STA_PPSTIME 0x0004 /* enable PPS time discipline (rw) */ -#define STA_FLL 0x0008 /* select frequency-lock mode (rw) */ - -#define STA_INS 0x0010 /* insert leap (rw) */ -#define STA_DEL 0x0020 /* delete leap (rw) */ -#define STA_UNSYNC 0x0040 /* clock unsynchronized (rw) */ -#define STA_FREQHOLD 0x0080 /* hold frequency (rw) */ - -#define STA_PPSSIGNAL 0x0100 /* PPS signal present (ro) */ -#define STA_PPSJITTER 0x0200 /* PPS signal jitter exceeded (ro) */ -#define STA_PPSWANDER 0x0400 /* PPS signal wander exceeded (ro) */ -#define STA_PPSERROR 0x0800 /* PPS signal calibration error (ro) */ - -#define STA_CLOCKERR 0x1000 /* clock hardware fault (ro) */ -#define STA_NANO 0x2000 /* resolution (0 = us, 1 = ns) (ro) */ -#define STA_MODE 0x4000 /* mode (0 = PLL, 1 = FLL) (ro) */ -#define STA_CLK 0x8000 /* clock source (0 = A, 1 = B) (ro) */ - -/* read-only bits */ -#define STA_RONLY (STA_PPSSIGNAL | STA_PPSJITTER | STA_PPSWANDER | \ - STA_PPSERROR | STA_CLOCKERR | STA_NANO | STA_MODE | STA_CLK) - -/* - * Clock states (time_state) - */ -#define TIME_OK 0 /* clock synchronized, no leap second */ -#define TIME_INS 1 /* insert leap second */ -#define TIME_DEL 2 /* delete leap second */ -#define TIME_OOP 3 /* leap second in progress */ -#define TIME_WAIT 4 /* leap second has occurred */ -#define TIME_ERROR 5 /* clock not synchronized */ -#define TIME_BAD TIME_ERROR /* bw compat */ - -#ifdef __KERNEL__ #include <linux/compiler.h> #include <linux/types.h> #include <linux/param.h> @@ -261,6 +152,4 @@ int read_current_timer(unsigned long *timer_val); /* The clock frequency of the i8253/i8254 PIT */ #define PIT_TICK_RATE 1193182ul -#endif /* KERNEL */ - #endif /* LINUX_TIMEX_H */ diff --git a/include/linux/toshiba.h b/include/linux/toshiba.h index 772dedbc3a2..915c3bb164a 100644 --- a/include/linux/toshiba.h +++ b/include/linux/toshiba.h @@ -16,25 +16,10 @@ * General Public License for more details. * */ - #ifndef _LINUX_TOSHIBA_H #define _LINUX_TOSHIBA_H -#define TOSH_PROC "/proc/toshiba" -#define TOSH_DEVICE "/dev/toshiba" -#define TOSH_SMM _IOWR('t', 0x90, int) /* broken: meant 24 bytes */ - -typedef struct { - unsigned int eax; - unsigned int ebx __attribute__ ((packed)); - unsigned int ecx __attribute__ ((packed)); - unsigned int edx __attribute__ ((packed)); - unsigned int esi __attribute__ ((packed)); - unsigned int edi __attribute__ ((packed)); -} SMMRegisters; +#include <uapi/linux/toshiba.h> -#ifdef __KERNEL__ int tosh_smm(SMMRegisters *regs); -#endif /* __KERNEL__ */ - #endif diff --git a/include/linux/tty.h b/include/linux/tty.h index 4f6c59a5fb7..f0b4eb47297 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -1,41 +1,6 @@ #ifndef _LINUX_TTY_H #define _LINUX_TTY_H -/* - * 'tty.h' defines some structures used by tty_io.c and some defines. - */ - -#define NR_LDISCS 30 - -/* line disciplines */ -#define N_TTY 0 -#define N_SLIP 1 -#define N_MOUSE 2 -#define N_PPP 3 -#define N_STRIP 4 -#define N_AX25 5 -#define N_X25 6 /* X.25 async */ -#define N_6PACK 7 -#define N_MASC 8 /* Reserved for Mobitex module <kaz@cafe.net> */ -#define N_R3964 9 /* Reserved for Simatic R3964 module */ -#define N_PROFIBUS_FDL 10 /* Reserved for Profibus */ -#define N_IRDA 11 /* Linux IrDa - http://irda.sourceforge.net/ */ -#define N_SMSBLOCK 12 /* SMS block mode - for talking to GSM data */ - /* cards about SMS messages */ -#define N_HDLC 13 /* synchronous HDLC */ -#define N_SYNC_PPP 14 /* synchronous PPP */ -#define N_HCI 15 /* Bluetooth HCI UART */ -#define N_GIGASET_M101 16 /* Siemens Gigaset M101 serial DECT adapter */ -#define N_SLCAN 17 /* Serial / USB serial CAN Adaptors */ -#define N_PPS 18 /* Pulse per Second */ -#define N_V253 19 /* Codec control over voice modem */ -#define N_CAIF 20 /* CAIF protocol for talking to modems */ -#define N_GSM0710 21 /* GSM 0710 Mux */ -#define N_TI_WL 22 /* for TI's WL BT, FM, GPS combo chips */ -#define N_TRACESINK 23 /* Trace data routing for MIPI P1149.7 */ -#define N_TRACEROUTER 24 /* Trace data routing for MIPI P1149.7 */ - -#ifdef __KERNEL__ #include <linux/fs.h> #include <linux/major.h> #include <linux/termios.h> @@ -44,6 +9,7 @@ #include <linux/tty_ldisc.h> #include <linux/mutex.h> #include <linux/tty_flags.h> +#include <uapi/linux/tty.h> @@ -694,5 +660,4 @@ do { \ } while (0) -#endif /* __KERNEL__ */ #endif diff --git a/include/linux/types.h b/include/linux/types.h index bf0dd7524b2..1cc0e4b9a04 100644 --- a/include/linux/types.h +++ b/include/linux/types.h @@ -1,22 +1,13 @@ #ifndef _LINUX_TYPES_H #define _LINUX_TYPES_H -#include <asm/types.h> +#define __EXPORTED_HEADERS__ +#include <uapi/linux/types.h> #ifndef __ASSEMBLY__ -#ifdef __KERNEL__ #define DECLARE_BITMAP(name,bits) \ unsigned long name[BITS_TO_LONGS(bits)] -#else -#ifndef __EXPORTED_HEADERS__ -#warning "Attempt to use kernel headers from user space, see http://kernelnewbies.org/KernelHeaders" -#endif /* __EXPORTED_HEADERS__ */ -#endif - -#include <linux/posix_types.h> - -#ifdef __KERNEL__ typedef __u32 __kernel_dev_t; @@ -157,48 +148,12 @@ typedef u64 dma_addr_t; typedef u32 dma_addr_t; #endif /* dma_addr_t */ -#endif /* __KERNEL__ */ - -/* - * Below are truly Linux-specific types that should never collide with - * any application/library that wants linux/types.h. - */ - #ifdef __CHECKER__ -#define __bitwise__ __attribute__((bitwise)) #else -#define __bitwise__ #endif #ifdef __CHECK_ENDIAN__ -#define __bitwise __bitwise__ #else -#define __bitwise #endif - -typedef __u16 __bitwise __le16; -typedef __u16 __bitwise __be16; -typedef __u32 __bitwise __le32; -typedef __u32 __bitwise __be32; -typedef __u64 __bitwise __le64; -typedef __u64 __bitwise __be64; - -typedef __u16 __bitwise __sum16; -typedef __u32 __bitwise __wsum; - -/* - * aligned_u64 should be used in defining kernel<->userspace ABIs to avoid - * common 32/64-bit compat problems. - * 64-bit values align to 4-byte boundaries on x86_32 (and possibly other - * architectures) and to 8-byte boundaries on 64-bit architectures. The new - * aligned_64 type enforces 8-byte alignment so that structs containing - * aligned_64 values have the same alignment on 32-bit and 64-bit architectures. - * No conversions are necessary between 32-bit user-space and a 64-bit kernel. - */ -#define __aligned_u64 __u64 __attribute__((aligned(8))) -#define __aligned_be64 __be64 __attribute__((aligned(8))) -#define __aligned_le64 __le64 __attribute__((aligned(8))) - -#ifdef __KERNEL__ typedef unsigned __bitwise__ gfp_t; typedef unsigned __bitwise__ fmode_t; @@ -256,6 +211,5 @@ struct callback_head { }; #define rcu_head callback_head -#endif /* __KERNEL__ */ #endif /* __ASSEMBLY__ */ #endif /* _LINUX_TYPES_H */ diff --git a/include/linux/udp.h b/include/linux/udp.h index 03f72a2ba02..0b67d779352 100644 --- a/include/linux/udp.h +++ b/include/linux/udp.h @@ -17,28 +17,10 @@ #ifndef _LINUX_UDP_H #define _LINUX_UDP_H -#include <linux/types.h> - -struct udphdr { - __be16 source; - __be16 dest; - __be16 len; - __sum16 check; -}; - -/* UDP socket options */ -#define UDP_CORK 1 /* Never send partially complete segments */ -#define UDP_ENCAP 100 /* Set the socket to accept encapsulated packets */ - -/* UDP encapsulation types */ -#define UDP_ENCAP_ESPINUDP_NON_IKE 1 /* draft-ietf-ipsec-nat-t-ike-00/01 */ -#define UDP_ENCAP_ESPINUDP 2 /* draft-ietf-ipsec-udp-encaps-06 */ -#define UDP_ENCAP_L2TPINUDP 3 /* rfc2661 */ - -#ifdef __KERNEL__ #include <net/inet_sock.h> #include <linux/skbuff.h> #include <net/netns/hash.h> +#include <uapi/linux/udp.h> static inline struct udphdr *udp_hdr(const struct sk_buff *skb) { @@ -96,6 +78,4 @@ static inline struct udp_sock *udp_sk(const struct sock *sk) #define IS_UDPLITE(__sk) (udp_sk(__sk)->pcflag) -#endif - #endif /* _LINUX_UDP_H */ diff --git a/include/linux/uinput.h b/include/linux/uinput.h index c454bbe39ee..0a4487d3fb1 100644 --- a/include/linux/uinput.h +++ b/include/linux/uinput.h @@ -1,5 +1,3 @@ -#ifndef __UINPUT_H_ -#define __UINPUT_H_ /* * User level driver support for input subsystem * @@ -31,13 +29,11 @@ * 0.1 20/06/2002 * - first public version */ +#ifndef __UINPUT_H_ +#define __UINPUT_H_ -#include <linux/types.h> -#include <linux/input.h> - -#define UINPUT_VERSION 3 +#include <uapi/linux/uinput.h> -#ifdef __KERNEL__ #define UINPUT_NAME "uinput" #define UINPUT_BUFFER_SIZE 16 #define UINPUT_NUM_REQUESTS 16 @@ -75,103 +71,4 @@ struct uinput_device { wait_queue_head_t requests_waitq; spinlock_t requests_lock; }; -#endif /* __KERNEL__ */ - -struct uinput_ff_upload { - __u32 request_id; - __s32 retval; - struct ff_effect effect; - struct ff_effect old; -}; - -struct uinput_ff_erase { - __u32 request_id; - __s32 retval; - __u32 effect_id; -}; - -/* ioctl */ -#define UINPUT_IOCTL_BASE 'U' -#define UI_DEV_CREATE _IO(UINPUT_IOCTL_BASE, 1) -#define UI_DEV_DESTROY _IO(UINPUT_IOCTL_BASE, 2) - -#define UI_SET_EVBIT _IOW(UINPUT_IOCTL_BASE, 100, int) -#define UI_SET_KEYBIT _IOW(UINPUT_IOCTL_BASE, 101, int) -#define UI_SET_RELBIT _IOW(UINPUT_IOCTL_BASE, 102, int) -#define UI_SET_ABSBIT _IOW(UINPUT_IOCTL_BASE, 103, int) -#define UI_SET_MSCBIT _IOW(UINPUT_IOCTL_BASE, 104, int) -#define UI_SET_LEDBIT _IOW(UINPUT_IOCTL_BASE, 105, int) -#define UI_SET_SNDBIT _IOW(UINPUT_IOCTL_BASE, 106, int) -#define UI_SET_FFBIT _IOW(UINPUT_IOCTL_BASE, 107, int) -#define UI_SET_PHYS _IOW(UINPUT_IOCTL_BASE, 108, char*) -#define UI_SET_SWBIT _IOW(UINPUT_IOCTL_BASE, 109, int) -#define UI_SET_PROPBIT _IOW(UINPUT_IOCTL_BASE, 110, int) - -#define UI_BEGIN_FF_UPLOAD _IOWR(UINPUT_IOCTL_BASE, 200, struct uinput_ff_upload) -#define UI_END_FF_UPLOAD _IOW(UINPUT_IOCTL_BASE, 201, struct uinput_ff_upload) -#define UI_BEGIN_FF_ERASE _IOWR(UINPUT_IOCTL_BASE, 202, struct uinput_ff_erase) -#define UI_END_FF_ERASE _IOW(UINPUT_IOCTL_BASE, 203, struct uinput_ff_erase) - -/* - * To write a force-feedback-capable driver, the upload_effect - * and erase_effect callbacks in input_dev must be implemented. - * The uinput driver will generate a fake input event when one of - * these callbacks are invoked. The userspace code then uses - * ioctls to retrieve additional parameters and send the return code. - * The callback blocks until this return code is sent. - * - * The described callback mechanism is only used if ff_effects_max - * is set. - * - * To implement upload_effect(): - * 1. Wait for an event with type == EV_UINPUT and code == UI_FF_UPLOAD. - * A request ID will be given in 'value'. - * 2. Allocate a uinput_ff_upload struct, fill in request_id with - * the 'value' from the EV_UINPUT event. - * 3. Issue a UI_BEGIN_FF_UPLOAD ioctl, giving it the - * uinput_ff_upload struct. It will be filled in with the - * ff_effects passed to upload_effect(). - * 4. Perform the effect upload, and place a return code back into - the uinput_ff_upload struct. - * 5. Issue a UI_END_FF_UPLOAD ioctl, also giving it the - * uinput_ff_upload_effect struct. This will complete execution - * of our upload_effect() handler. - * - * To implement erase_effect(): - * 1. Wait for an event with type == EV_UINPUT and code == UI_FF_ERASE. - * A request ID will be given in 'value'. - * 2. Allocate a uinput_ff_erase struct, fill in request_id with - * the 'value' from the EV_UINPUT event. - * 3. Issue a UI_BEGIN_FF_ERASE ioctl, giving it the - * uinput_ff_erase struct. It will be filled in with the - * effect ID passed to erase_effect(). - * 4. Perform the effect erasure, and place a return code back - * into the uinput_ff_erase struct. - * 5. Issue a UI_END_FF_ERASE ioctl, also giving it the - * uinput_ff_erase_effect struct. This will complete execution - * of our erase_effect() handler. - */ - -/* - * This is the new event type, used only by uinput. - * 'code' is UI_FF_UPLOAD or UI_FF_ERASE, and 'value' - * is the unique request ID. This number was picked - * arbitrarily, above EV_MAX (since the input system - * never sees it) but in the range of a 16-bit int. - */ -#define EV_UINPUT 0x0101 -#define UI_FF_UPLOAD 1 -#define UI_FF_ERASE 2 - -#define UINPUT_MAX_NAME_SIZE 80 -struct uinput_user_dev { - char name[UINPUT_MAX_NAME_SIZE]; - struct input_id id; - __u32 ff_effects_max; - __s32 absmax[ABS_CNT]; - __s32 absmin[ABS_CNT]; - __s32 absfuzz[ABS_CNT]; - __s32 absflat[ABS_CNT]; -}; #endif /* __UINPUT_H_ */ - diff --git a/include/linux/uio.h b/include/linux/uio.h index 98c114323a8..629aaf51f30 100644 --- a/include/linux/uio.h +++ b/include/linux/uio.h @@ -1,9 +1,3 @@ -#ifndef __LINUX_UIO_H -#define __LINUX_UIO_H - -#include <linux/compiler.h> -#include <linux/types.h> - /* * Berkeley style UIO structures - Alan Cox 1994. * @@ -12,21 +6,11 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ +#ifndef __LINUX_UIO_H +#define __LINUX_UIO_H -struct iovec -{ - void __user *iov_base; /* BSD uses caddr_t (1003.1g requires void *) */ - __kernel_size_t iov_len; /* Must be size_t (1003.1g) */ -}; - -/* - * UIO_MAXIOV shall be at least 16 1003.1g (5.4.1.1) - */ - -#define UIO_FASTIOV 8 -#define UIO_MAXIOV 1024 +#include <uapi/linux/uio.h> -#ifdef __KERNEL__ struct kvec { void *iov_base; /* and that should *never* hold a userland pointer */ @@ -52,5 +36,3 @@ static inline size_t iov_length(const struct iovec *iov, unsigned long nr_segs) unsigned long iov_shorten(struct iovec *iov, unsigned long nr_segs, size_t to); #endif - -#endif diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h index f87cf622317..ddbbb7de894 100644 --- a/include/linux/usb/usbnet.h +++ b/include/linux/usb/usbnet.h @@ -68,6 +68,7 @@ struct usbnet { # define EVENT_RX_PAUSED 5 # define EVENT_DEV_ASLEEP 6 # define EVENT_DEV_OPEN 7 +# define EVENT_DEVICE_REPORT_IDLE 8 }; static inline struct usb_driver *driver_of(struct usb_interface *intf) @@ -160,6 +161,7 @@ extern int usbnet_probe(struct usb_interface *, const struct usb_device_id *); extern int usbnet_suspend(struct usb_interface *, pm_message_t); extern int usbnet_resume(struct usb_interface *); extern void usbnet_disconnect(struct usb_interface *); +extern void usbnet_device_suggests_idle(struct usbnet *dev); /* Drivers that reuse some of the standard USB CDC infrastructure diff --git a/include/linux/usbdevice_fs.h b/include/linux/usbdevice_fs.h index 4abe28e41cb..04a26285416 100644 --- a/include/linux/usbdevice_fs.h +++ b/include/linux/usbdevice_fs.h @@ -25,126 +25,11 @@ */ /*****************************************************************************/ - #ifndef _LINUX_USBDEVICE_FS_H #define _LINUX_USBDEVICE_FS_H -#include <linux/types.h> -#include <linux/magic.h> - -/* --------------------------------------------------------------------- */ - -/* usbdevfs ioctl codes */ - -struct usbdevfs_ctrltransfer { - __u8 bRequestType; - __u8 bRequest; - __u16 wValue; - __u16 wIndex; - __u16 wLength; - __u32 timeout; /* in milliseconds */ - void __user *data; -}; - -struct usbdevfs_bulktransfer { - unsigned int ep; - unsigned int len; - unsigned int timeout; /* in milliseconds */ - void __user *data; -}; - -struct usbdevfs_setinterface { - unsigned int interface; - unsigned int altsetting; -}; - -struct usbdevfs_disconnectsignal { - unsigned int signr; - void __user *context; -}; - -#define USBDEVFS_MAXDRIVERNAME 255 - -struct usbdevfs_getdriver { - unsigned int interface; - char driver[USBDEVFS_MAXDRIVERNAME + 1]; -}; - -struct usbdevfs_connectinfo { - unsigned int devnum; - unsigned char slow; -}; - -#define USBDEVFS_URB_SHORT_NOT_OK 0x01 -#define USBDEVFS_URB_ISO_ASAP 0x02 -#define USBDEVFS_URB_BULK_CONTINUATION 0x04 -#define USBDEVFS_URB_NO_FSBR 0x20 -#define USBDEVFS_URB_ZERO_PACKET 0x40 -#define USBDEVFS_URB_NO_INTERRUPT 0x80 - -#define USBDEVFS_URB_TYPE_ISO 0 -#define USBDEVFS_URB_TYPE_INTERRUPT 1 -#define USBDEVFS_URB_TYPE_CONTROL 2 -#define USBDEVFS_URB_TYPE_BULK 3 +#include <uapi/linux/usbdevice_fs.h> -struct usbdevfs_iso_packet_desc { - unsigned int length; - unsigned int actual_length; - unsigned int status; -}; - -struct usbdevfs_urb { - unsigned char type; - unsigned char endpoint; - int status; - unsigned int flags; - void __user *buffer; - int buffer_length; - int actual_length; - int start_frame; - int number_of_packets; - int error_count; - unsigned int signr; /* signal to be sent on completion, - or 0 if none should be sent. */ - void __user *usercontext; - struct usbdevfs_iso_packet_desc iso_frame_desc[0]; -}; - -/* ioctls for talking directly to drivers */ -struct usbdevfs_ioctl { - int ifno; /* interface 0..N ; negative numbers reserved */ - int ioctl_code; /* MUST encode size + direction of data so the - * macros in <asm/ioctl.h> give correct values */ - void __user *data; /* param buffer (in, or out) */ -}; - -/* You can do most things with hubs just through control messages, - * except find out what device connects to what port. */ -struct usbdevfs_hub_portinfo { - char nports; /* number of downstream ports in this hub */ - char port [127]; /* e.g. port 3 connects to device 27 */ -}; - -/* Device capability flags */ -#define USBDEVFS_CAP_ZERO_PACKET 0x01 -#define USBDEVFS_CAP_BULK_CONTINUATION 0x02 -#define USBDEVFS_CAP_NO_PACKET_SIZE_LIM 0x04 -#define USBDEVFS_CAP_BULK_SCATTER_GATHER 0x08 - -/* USBDEVFS_DISCONNECT_CLAIM flags & struct */ - -/* disconnect-and-claim if the driver matches the driver field */ -#define USBDEVFS_DISCONNECT_CLAIM_IF_DRIVER 0x01 -/* disconnect-and-claim except when the driver matches the driver field */ -#define USBDEVFS_DISCONNECT_CLAIM_EXCEPT_DRIVER 0x02 - -struct usbdevfs_disconnect_claim { - unsigned int interface; - unsigned int flags; - char driver[USBDEVFS_MAXDRIVERNAME + 1]; -}; - -#ifdef __KERNEL__ #ifdef CONFIG_COMPAT #include <linux/compat.h> @@ -192,38 +77,4 @@ struct usbdevfs_ioctl32 { compat_caddr_t data; }; #endif -#endif /* __KERNEL__ */ - -#define USBDEVFS_CONTROL _IOWR('U', 0, struct usbdevfs_ctrltransfer) -#define USBDEVFS_CONTROL32 _IOWR('U', 0, struct usbdevfs_ctrltransfer32) -#define USBDEVFS_BULK _IOWR('U', 2, struct usbdevfs_bulktransfer) -#define USBDEVFS_BULK32 _IOWR('U', 2, struct usbdevfs_bulktransfer32) -#define USBDEVFS_RESETEP _IOR('U', 3, unsigned int) -#define USBDEVFS_SETINTERFACE _IOR('U', 4, struct usbdevfs_setinterface) -#define USBDEVFS_SETCONFIGURATION _IOR('U', 5, unsigned int) -#define USBDEVFS_GETDRIVER _IOW('U', 8, struct usbdevfs_getdriver) -#define USBDEVFS_SUBMITURB _IOR('U', 10, struct usbdevfs_urb) -#define USBDEVFS_SUBMITURB32 _IOR('U', 10, struct usbdevfs_urb32) -#define USBDEVFS_DISCARDURB _IO('U', 11) -#define USBDEVFS_REAPURB _IOW('U', 12, void *) -#define USBDEVFS_REAPURB32 _IOW('U', 12, __u32) -#define USBDEVFS_REAPURBNDELAY _IOW('U', 13, void *) -#define USBDEVFS_REAPURBNDELAY32 _IOW('U', 13, __u32) -#define USBDEVFS_DISCSIGNAL _IOR('U', 14, struct usbdevfs_disconnectsignal) -#define USBDEVFS_DISCSIGNAL32 _IOR('U', 14, struct usbdevfs_disconnectsignal32) -#define USBDEVFS_CLAIMINTERFACE _IOR('U', 15, unsigned int) -#define USBDEVFS_RELEASEINTERFACE _IOR('U', 16, unsigned int) -#define USBDEVFS_CONNECTINFO _IOW('U', 17, struct usbdevfs_connectinfo) -#define USBDEVFS_IOCTL _IOWR('U', 18, struct usbdevfs_ioctl) -#define USBDEVFS_IOCTL32 _IOWR('U', 18, struct usbdevfs_ioctl32) -#define USBDEVFS_HUB_PORTINFO _IOR('U', 19, struct usbdevfs_hub_portinfo) -#define USBDEVFS_RESET _IO('U', 20) -#define USBDEVFS_CLEAR_HALT _IOR('U', 21, unsigned int) -#define USBDEVFS_DISCONNECT _IO('U', 22) -#define USBDEVFS_CONNECT _IO('U', 23) -#define USBDEVFS_CLAIM_PORT _IOR('U', 24, unsigned int) -#define USBDEVFS_RELEASE_PORT _IOR('U', 25, unsigned int) -#define USBDEVFS_GET_CAPABILITIES _IOR('U', 26, __u32) -#define USBDEVFS_DISCONNECT_CLAIM _IOR('U', 27, struct usbdevfs_disconnect_claim) - #endif /* _LINUX_USBDEVICE_FS_H */ diff --git a/include/linux/utsname.h b/include/linux/utsname.h index c714ed75eae..2b345206722 100644 --- a/include/linux/utsname.h +++ b/include/linux/utsname.h @@ -1,41 +1,12 @@ #ifndef _LINUX_UTSNAME_H #define _LINUX_UTSNAME_H -#define __OLD_UTS_LEN 8 - -struct oldold_utsname { - char sysname[9]; - char nodename[9]; - char release[9]; - char version[9]; - char machine[9]; -}; - -#define __NEW_UTS_LEN 64 - -struct old_utsname { - char sysname[65]; - char nodename[65]; - char release[65]; - char version[65]; - char machine[65]; -}; - -struct new_utsname { - char sysname[__NEW_UTS_LEN + 1]; - char nodename[__NEW_UTS_LEN + 1]; - char release[__NEW_UTS_LEN + 1]; - char version[__NEW_UTS_LEN + 1]; - char machine[__NEW_UTS_LEN + 1]; - char domainname[__NEW_UTS_LEN + 1]; -}; - -#ifdef __KERNEL__ #include <linux/sched.h> #include <linux/kref.h> #include <linux/nsproxy.h> #include <linux/err.h> +#include <uapi/linux/utsname.h> enum uts_proc { UTS_PROC_OSTYPE, @@ -108,6 +79,4 @@ static inline struct new_utsname *init_utsname(void) extern struct rw_semaphore uts_sem; -#endif /* __KERNEL__ */ - #endif /* _LINUX_UTSNAME_H */ diff --git a/include/linux/uuid.h b/include/linux/uuid.h index f86c37bfd4a..6df2509033d 100644 --- a/include/linux/uuid.h +++ b/include/linux/uuid.h @@ -17,44 +17,11 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ - #ifndef _LINUX_UUID_H_ #define _LINUX_UUID_H_ -#include <linux/types.h> -#include <linux/string.h> - -typedef struct { - __u8 b[16]; -} uuid_le; - -typedef struct { - __u8 b[16]; -} uuid_be; - -#define UUID_LE(a, b, c, d0, d1, d2, d3, d4, d5, d6, d7) \ -((uuid_le) \ -{{ (a) & 0xff, ((a) >> 8) & 0xff, ((a) >> 16) & 0xff, ((a) >> 24) & 0xff, \ - (b) & 0xff, ((b) >> 8) & 0xff, \ - (c) & 0xff, ((c) >> 8) & 0xff, \ - (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7) }}) +#include <uapi/linux/uuid.h> -#define UUID_BE(a, b, c, d0, d1, d2, d3, d4, d5, d6, d7) \ -((uuid_be) \ -{{ ((a) >> 24) & 0xff, ((a) >> 16) & 0xff, ((a) >> 8) & 0xff, (a) & 0xff, \ - ((b) >> 8) & 0xff, (b) & 0xff, \ - ((c) >> 8) & 0xff, (c) & 0xff, \ - (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7) }}) - -#define NULL_UUID_LE \ - UUID_LE(0x00000000, 0x0000, 0x0000, 0x00, 0x00, 0x00, 0x00, \ - 0x00, 0x00, 0x00, 0x00) - -#define NULL_UUID_BE \ - UUID_BE(0x00000000, 0x0000, 0x0000, 0x00, 0x00, 0x00, 0x00, \ - 0x00, 0x00, 0x00, 0x00) - -#ifdef __KERNEL__ static inline int uuid_le_cmp(const uuid_le u1, const uuid_le u2) { @@ -69,6 +36,4 @@ static inline int uuid_be_cmp(const uuid_be u1, const uuid_be u2) extern void uuid_le_gen(uuid_le *u); extern void uuid_be_gen(uuid_be *u); -#endif /* __KERNEL__ */ - #endif diff --git a/include/linux/vfio.h b/include/linux/vfio.h index 0a4f180a11d..ab9e86224c5 100644 --- a/include/linux/vfio.h +++ b/include/linux/vfio.h @@ -11,15 +11,10 @@ #ifndef VFIO_H #define VFIO_H -#include <linux/types.h> -#include <linux/ioctl.h> - -#define VFIO_API_VERSION 0 - -#ifdef __KERNEL__ /* Internal VFIO-core/bus driver API */ #include <linux/iommu.h> #include <linux/mm.h> +#include <uapi/linux/vfio.h> /** * struct vfio_device_ops - VFIO bus driver device callbacks @@ -92,354 +87,4 @@ extern void vfio_unregister_iommu_driver( TYPE tmp; \ offsetof(TYPE, MEMBER) + sizeof(tmp.MEMBER); }) \ -#endif /* __KERNEL__ */ - -/* Kernel & User level defines for VFIO IOCTLs. */ - -/* Extensions */ - -#define VFIO_TYPE1_IOMMU 1 - -/* - * The IOCTL interface is designed for extensibility by embedding the - * structure length (argsz) and flags into structures passed between - * kernel and userspace. We therefore use the _IO() macro for these - * defines to avoid implicitly embedding a size into the ioctl request. - * As structure fields are added, argsz will increase to match and flag - * bits will be defined to indicate additional fields with valid data. - * It's *always* the caller's responsibility to indicate the size of - * the structure passed by setting argsz appropriately. - */ - -#define VFIO_TYPE (';') -#define VFIO_BASE 100 - -/* -------- IOCTLs for VFIO file descriptor (/dev/vfio/vfio) -------- */ - -/** - * VFIO_GET_API_VERSION - _IO(VFIO_TYPE, VFIO_BASE + 0) - * - * Report the version of the VFIO API. This allows us to bump the entire - * API version should we later need to add or change features in incompatible - * ways. - * Return: VFIO_API_VERSION - * Availability: Always - */ -#define VFIO_GET_API_VERSION _IO(VFIO_TYPE, VFIO_BASE + 0) - -/** - * VFIO_CHECK_EXTENSION - _IOW(VFIO_TYPE, VFIO_BASE + 1, __u32) - * - * Check whether an extension is supported. - * Return: 0 if not supported, 1 (or some other positive integer) if supported. - * Availability: Always - */ -#define VFIO_CHECK_EXTENSION _IO(VFIO_TYPE, VFIO_BASE + 1) - -/** - * VFIO_SET_IOMMU - _IOW(VFIO_TYPE, VFIO_BASE + 2, __s32) - * - * Set the iommu to the given type. The type must be supported by an - * iommu driver as verified by calling CHECK_EXTENSION using the same - * type. A group must be set to this file descriptor before this - * ioctl is available. The IOMMU interfaces enabled by this call are - * specific to the value set. - * Return: 0 on success, -errno on failure - * Availability: When VFIO group attached - */ -#define VFIO_SET_IOMMU _IO(VFIO_TYPE, VFIO_BASE + 2) - -/* -------- IOCTLs for GROUP file descriptors (/dev/vfio/$GROUP) -------- */ - -/** - * VFIO_GROUP_GET_STATUS - _IOR(VFIO_TYPE, VFIO_BASE + 3, - * struct vfio_group_status) - * - * Retrieve information about the group. Fills in provided - * struct vfio_group_info. Caller sets argsz. - * Return: 0 on succes, -errno on failure. - * Availability: Always - */ -struct vfio_group_status { - __u32 argsz; - __u32 flags; -#define VFIO_GROUP_FLAGS_VIABLE (1 << 0) -#define VFIO_GROUP_FLAGS_CONTAINER_SET (1 << 1) -}; -#define VFIO_GROUP_GET_STATUS _IO(VFIO_TYPE, VFIO_BASE + 3) - -/** - * VFIO_GROUP_SET_CONTAINER - _IOW(VFIO_TYPE, VFIO_BASE + 4, __s32) - * - * Set the container for the VFIO group to the open VFIO file - * descriptor provided. Groups may only belong to a single - * container. Containers may, at their discretion, support multiple - * groups. Only when a container is set are all of the interfaces - * of the VFIO file descriptor and the VFIO group file descriptor - * available to the user. - * Return: 0 on success, -errno on failure. - * Availability: Always - */ -#define VFIO_GROUP_SET_CONTAINER _IO(VFIO_TYPE, VFIO_BASE + 4) - -/** - * VFIO_GROUP_UNSET_CONTAINER - _IO(VFIO_TYPE, VFIO_BASE + 5) - * - * Remove the group from the attached container. This is the - * opposite of the SET_CONTAINER call and returns the group to - * an initial state. All device file descriptors must be released - * prior to calling this interface. When removing the last group - * from a container, the IOMMU will be disabled and all state lost, - * effectively also returning the VFIO file descriptor to an initial - * state. - * Return: 0 on success, -errno on failure. - * Availability: When attached to container - */ -#define VFIO_GROUP_UNSET_CONTAINER _IO(VFIO_TYPE, VFIO_BASE + 5) - -/** - * VFIO_GROUP_GET_DEVICE_FD - _IOW(VFIO_TYPE, VFIO_BASE + 6, char) - * - * Return a new file descriptor for the device object described by - * the provided string. The string should match a device listed in - * the devices subdirectory of the IOMMU group sysfs entry. The - * group containing the device must already be added to this context. - * Return: new file descriptor on success, -errno on failure. - * Availability: When attached to container - */ -#define VFIO_GROUP_GET_DEVICE_FD _IO(VFIO_TYPE, VFIO_BASE + 6) - -/* --------------- IOCTLs for DEVICE file descriptors --------------- */ - -/** - * VFIO_DEVICE_GET_INFO - _IOR(VFIO_TYPE, VFIO_BASE + 7, - * struct vfio_device_info) - * - * Retrieve information about the device. Fills in provided - * struct vfio_device_info. Caller sets argsz. - * Return: 0 on success, -errno on failure. - */ -struct vfio_device_info { - __u32 argsz; - __u32 flags; -#define VFIO_DEVICE_FLAGS_RESET (1 << 0) /* Device supports reset */ -#define VFIO_DEVICE_FLAGS_PCI (1 << 1) /* vfio-pci device */ - __u32 num_regions; /* Max region index + 1 */ - __u32 num_irqs; /* Max IRQ index + 1 */ -}; -#define VFIO_DEVICE_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 7) - -/** - * VFIO_DEVICE_GET_REGION_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 8, - * struct vfio_region_info) - * - * Retrieve information about a device region. Caller provides - * struct vfio_region_info with index value set. Caller sets argsz. - * Implementation of region mapping is bus driver specific. This is - * intended to describe MMIO, I/O port, as well as bus specific - * regions (ex. PCI config space). Zero sized regions may be used - * to describe unimplemented regions (ex. unimplemented PCI BARs). - * Return: 0 on success, -errno on failure. - */ -struct vfio_region_info { - __u32 argsz; - __u32 flags; -#define VFIO_REGION_INFO_FLAG_READ (1 << 0) /* Region supports read */ -#define VFIO_REGION_INFO_FLAG_WRITE (1 << 1) /* Region supports write */ -#define VFIO_REGION_INFO_FLAG_MMAP (1 << 2) /* Region supports mmap */ - __u32 index; /* Region index */ - __u32 resv; /* Reserved for alignment */ - __u64 size; /* Region size (bytes) */ - __u64 offset; /* Region offset from start of device fd */ -}; -#define VFIO_DEVICE_GET_REGION_INFO _IO(VFIO_TYPE, VFIO_BASE + 8) - -/** - * VFIO_DEVICE_GET_IRQ_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 9, - * struct vfio_irq_info) - * - * Retrieve information about a device IRQ. Caller provides - * struct vfio_irq_info with index value set. Caller sets argsz. - * Implementation of IRQ mapping is bus driver specific. Indexes - * using multiple IRQs are primarily intended to support MSI-like - * interrupt blocks. Zero count irq blocks may be used to describe - * unimplemented interrupt types. - * - * The EVENTFD flag indicates the interrupt index supports eventfd based - * signaling. - * - * The MASKABLE flags indicates the index supports MASK and UNMASK - * actions described below. - * - * AUTOMASKED indicates that after signaling, the interrupt line is - * automatically masked by VFIO and the user needs to unmask the line - * to receive new interrupts. This is primarily intended to distinguish - * level triggered interrupts. - * - * The NORESIZE flag indicates that the interrupt lines within the index - * are setup as a set and new subindexes cannot be enabled without first - * disabling the entire index. This is used for interrupts like PCI MSI - * and MSI-X where the driver may only use a subset of the available - * indexes, but VFIO needs to enable a specific number of vectors - * upfront. In the case of MSI-X, where the user can enable MSI-X and - * then add and unmask vectors, it's up to userspace to make the decision - * whether to allocate the maximum supported number of vectors or tear - * down setup and incrementally increase the vectors as each is enabled. - */ -struct vfio_irq_info { - __u32 argsz; - __u32 flags; -#define VFIO_IRQ_INFO_EVENTFD (1 << 0) -#define VFIO_IRQ_INFO_MASKABLE (1 << 1) -#define VFIO_IRQ_INFO_AUTOMASKED (1 << 2) -#define VFIO_IRQ_INFO_NORESIZE (1 << 3) - __u32 index; /* IRQ index */ - __u32 count; /* Number of IRQs within this index */ -}; -#define VFIO_DEVICE_GET_IRQ_INFO _IO(VFIO_TYPE, VFIO_BASE + 9) - -/** - * VFIO_DEVICE_SET_IRQS - _IOW(VFIO_TYPE, VFIO_BASE + 10, struct vfio_irq_set) - * - * Set signaling, masking, and unmasking of interrupts. Caller provides - * struct vfio_irq_set with all fields set. 'start' and 'count' indicate - * the range of subindexes being specified. - * - * The DATA flags specify the type of data provided. If DATA_NONE, the - * operation performs the specified action immediately on the specified - * interrupt(s). For example, to unmask AUTOMASKED interrupt [0,0]: - * flags = (DATA_NONE|ACTION_UNMASK), index = 0, start = 0, count = 1. - * - * DATA_BOOL allows sparse support for the same on arrays of interrupts. - * For example, to mask interrupts [0,1] and [0,3] (but not [0,2]): - * flags = (DATA_BOOL|ACTION_MASK), index = 0, start = 1, count = 3, - * data = {1,0,1} - * - * DATA_EVENTFD binds the specified ACTION to the provided __s32 eventfd. - * A value of -1 can be used to either de-assign interrupts if already - * assigned or skip un-assigned interrupts. For example, to set an eventfd - * to be trigger for interrupts [0,0] and [0,2]: - * flags = (DATA_EVENTFD|ACTION_TRIGGER), index = 0, start = 0, count = 3, - * data = {fd1, -1, fd2} - * If index [0,1] is previously set, two count = 1 ioctls calls would be - * required to set [0,0] and [0,2] without changing [0,1]. - * - * Once a signaling mechanism is set, DATA_BOOL or DATA_NONE can be used - * with ACTION_TRIGGER to perform kernel level interrupt loopback testing - * from userspace (ie. simulate hardware triggering). - * - * Setting of an event triggering mechanism to userspace for ACTION_TRIGGER - * enables the interrupt index for the device. Individual subindex interrupts - * can be disabled using the -1 value for DATA_EVENTFD or the index can be - * disabled as a whole with: flags = (DATA_NONE|ACTION_TRIGGER), count = 0. - * - * Note that ACTION_[UN]MASK specify user->kernel signaling (irqfds) while - * ACTION_TRIGGER specifies kernel->user signaling. - */ -struct vfio_irq_set { - __u32 argsz; - __u32 flags; -#define VFIO_IRQ_SET_DATA_NONE (1 << 0) /* Data not present */ -#define VFIO_IRQ_SET_DATA_BOOL (1 << 1) /* Data is bool (u8) */ -#define VFIO_IRQ_SET_DATA_EVENTFD (1 << 2) /* Data is eventfd (s32) */ -#define VFIO_IRQ_SET_ACTION_MASK (1 << 3) /* Mask interrupt */ -#define VFIO_IRQ_SET_ACTION_UNMASK (1 << 4) /* Unmask interrupt */ -#define VFIO_IRQ_SET_ACTION_TRIGGER (1 << 5) /* Trigger interrupt */ - __u32 index; - __u32 start; - __u32 count; - __u8 data[]; -}; -#define VFIO_DEVICE_SET_IRQS _IO(VFIO_TYPE, VFIO_BASE + 10) - -#define VFIO_IRQ_SET_DATA_TYPE_MASK (VFIO_IRQ_SET_DATA_NONE | \ - VFIO_IRQ_SET_DATA_BOOL | \ - VFIO_IRQ_SET_DATA_EVENTFD) -#define VFIO_IRQ_SET_ACTION_TYPE_MASK (VFIO_IRQ_SET_ACTION_MASK | \ - VFIO_IRQ_SET_ACTION_UNMASK | \ - VFIO_IRQ_SET_ACTION_TRIGGER) -/** - * VFIO_DEVICE_RESET - _IO(VFIO_TYPE, VFIO_BASE + 11) - * - * Reset a device. - */ -#define VFIO_DEVICE_RESET _IO(VFIO_TYPE, VFIO_BASE + 11) - -/* - * The VFIO-PCI bus driver makes use of the following fixed region and - * IRQ index mapping. Unimplemented regions return a size of zero. - * Unimplemented IRQ types return a count of zero. - */ - -enum { - VFIO_PCI_BAR0_REGION_INDEX, - VFIO_PCI_BAR1_REGION_INDEX, - VFIO_PCI_BAR2_REGION_INDEX, - VFIO_PCI_BAR3_REGION_INDEX, - VFIO_PCI_BAR4_REGION_INDEX, - VFIO_PCI_BAR5_REGION_INDEX, - VFIO_PCI_ROM_REGION_INDEX, - VFIO_PCI_CONFIG_REGION_INDEX, - VFIO_PCI_NUM_REGIONS -}; - -enum { - VFIO_PCI_INTX_IRQ_INDEX, - VFIO_PCI_MSI_IRQ_INDEX, - VFIO_PCI_MSIX_IRQ_INDEX, - VFIO_PCI_NUM_IRQS -}; - -/* -------- API for Type1 VFIO IOMMU -------- */ - -/** - * VFIO_IOMMU_GET_INFO - _IOR(VFIO_TYPE, VFIO_BASE + 12, struct vfio_iommu_info) - * - * Retrieve information about the IOMMU object. Fills in provided - * struct vfio_iommu_info. Caller sets argsz. - * - * XXX Should we do these by CHECK_EXTENSION too? - */ -struct vfio_iommu_type1_info { - __u32 argsz; - __u32 flags; -#define VFIO_IOMMU_INFO_PGSIZES (1 << 0) /* supported page sizes info */ - __u64 iova_pgsizes; /* Bitmap of supported page sizes */ -}; - -#define VFIO_IOMMU_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12) - -/** - * VFIO_IOMMU_MAP_DMA - _IOW(VFIO_TYPE, VFIO_BASE + 13, struct vfio_dma_map) - * - * Map process virtual addresses to IO virtual addresses using the - * provided struct vfio_dma_map. Caller sets argsz. READ &/ WRITE required. - */ -struct vfio_iommu_type1_dma_map { - __u32 argsz; - __u32 flags; -#define VFIO_DMA_MAP_FLAG_READ (1 << 0) /* readable from device */ -#define VFIO_DMA_MAP_FLAG_WRITE (1 << 1) /* writable from device */ - __u64 vaddr; /* Process virtual address */ - __u64 iova; /* IO virtual address */ - __u64 size; /* Size of mapping (bytes) */ -}; - -#define VFIO_IOMMU_MAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 13) - -/** - * VFIO_IOMMU_UNMAP_DMA - _IOW(VFIO_TYPE, VFIO_BASE + 14, struct vfio_dma_unmap) - * - * Unmap IO virtual addresses using the provided struct vfio_dma_unmap. - * Caller sets argsz. - */ -struct vfio_iommu_type1_dma_unmap { - __u32 argsz; - __u32 flags; - __u64 iova; /* IO virtual address */ - __u64 size; /* Size of mapping (bytes) */ -}; - -#define VFIO_IOMMU_UNMAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 14) - #endif /* VFIO_H */ diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index 61395ef85a0..73ea2fb0473 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -56,1940 +56,7 @@ #ifndef __LINUX_VIDEODEV2_H #define __LINUX_VIDEODEV2_H -#ifdef __KERNEL__ #include <linux/time.h> /* need struct timeval */ -#else -#include <sys/time.h> -#endif -#include <linux/compiler.h> -#include <linux/ioctl.h> -#include <linux/types.h> -#include <linux/v4l2-common.h> -#include <linux/v4l2-controls.h> - -/* - * Common stuff for both V4L1 and V4L2 - * Moved from videodev.h - */ -#define VIDEO_MAX_FRAME 32 -#define VIDEO_MAX_PLANES 8 - -#ifndef __KERNEL__ - -/* These defines are V4L1 specific and should not be used with the V4L2 API! - They will be removed from this header in the future. */ - -#define VID_TYPE_CAPTURE 1 /* Can capture */ -#define VID_TYPE_TUNER 2 /* Can tune */ -#define VID_TYPE_TELETEXT 4 /* Does teletext */ -#define VID_TYPE_OVERLAY 8 /* Overlay onto frame buffer */ -#define VID_TYPE_CHROMAKEY 16 /* Overlay by chromakey */ -#define VID_TYPE_CLIPPING 32 /* Can clip */ -#define VID_TYPE_FRAMERAM 64 /* Uses the frame buffer memory */ -#define VID_TYPE_SCALES 128 /* Scalable */ -#define VID_TYPE_MONOCHROME 256 /* Monochrome only */ -#define VID_TYPE_SUBCAPTURE 512 /* Can capture subareas of the image */ -#define VID_TYPE_MPEG_DECODER 1024 /* Can decode MPEG streams */ -#define VID_TYPE_MPEG_ENCODER 2048 /* Can encode MPEG streams */ -#define VID_TYPE_MJPEG_DECODER 4096 /* Can decode MJPEG streams */ -#define VID_TYPE_MJPEG_ENCODER 8192 /* Can encode MJPEG streams */ -#endif - -/* - * M I S C E L L A N E O U S - */ - -/* Four-character-code (FOURCC) */ -#define v4l2_fourcc(a, b, c, d)\ - ((__u32)(a) | ((__u32)(b) << 8) | ((__u32)(c) << 16) | ((__u32)(d) << 24)) - -/* - * E N U M S - */ -enum v4l2_field { - V4L2_FIELD_ANY = 0, /* driver can choose from none, - top, bottom, interlaced - depending on whatever it thinks - is approximate ... */ - V4L2_FIELD_NONE = 1, /* this device has no fields ... */ - V4L2_FIELD_TOP = 2, /* top field only */ - V4L2_FIELD_BOTTOM = 3, /* bottom field only */ - V4L2_FIELD_INTERLACED = 4, /* both fields interlaced */ - V4L2_FIELD_SEQ_TB = 5, /* both fields sequential into one - buffer, top-bottom order */ - V4L2_FIELD_SEQ_BT = 6, /* same as above + bottom-top order */ - V4L2_FIELD_ALTERNATE = 7, /* both fields alternating into - separate buffers */ - V4L2_FIELD_INTERLACED_TB = 8, /* both fields interlaced, top field - first and the top field is - transmitted first */ - V4L2_FIELD_INTERLACED_BT = 9, /* both fields interlaced, top field - first and the bottom field is - transmitted first */ -}; -#define V4L2_FIELD_HAS_TOP(field) \ - ((field) == V4L2_FIELD_TOP ||\ - (field) == V4L2_FIELD_INTERLACED ||\ - (field) == V4L2_FIELD_INTERLACED_TB ||\ - (field) == V4L2_FIELD_INTERLACED_BT ||\ - (field) == V4L2_FIELD_SEQ_TB ||\ - (field) == V4L2_FIELD_SEQ_BT) -#define V4L2_FIELD_HAS_BOTTOM(field) \ - ((field) == V4L2_FIELD_BOTTOM ||\ - (field) == V4L2_FIELD_INTERLACED ||\ - (field) == V4L2_FIELD_INTERLACED_TB ||\ - (field) == V4L2_FIELD_INTERLACED_BT ||\ - (field) == V4L2_FIELD_SEQ_TB ||\ - (field) == V4L2_FIELD_SEQ_BT) -#define V4L2_FIELD_HAS_BOTH(field) \ - ((field) == V4L2_FIELD_INTERLACED ||\ - (field) == V4L2_FIELD_INTERLACED_TB ||\ - (field) == V4L2_FIELD_INTERLACED_BT ||\ - (field) == V4L2_FIELD_SEQ_TB ||\ - (field) == V4L2_FIELD_SEQ_BT) - -enum v4l2_buf_type { - V4L2_BUF_TYPE_VIDEO_CAPTURE = 1, - V4L2_BUF_TYPE_VIDEO_OUTPUT = 2, - V4L2_BUF_TYPE_VIDEO_OVERLAY = 3, - V4L2_BUF_TYPE_VBI_CAPTURE = 4, - V4L2_BUF_TYPE_VBI_OUTPUT = 5, - V4L2_BUF_TYPE_SLICED_VBI_CAPTURE = 6, - V4L2_BUF_TYPE_SLICED_VBI_OUTPUT = 7, -#if 1 - /* Experimental */ - V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY = 8, -#endif - V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE = 9, - V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE = 10, - /* Deprecated, do not use */ - V4L2_BUF_TYPE_PRIVATE = 0x80, -}; - -#define V4L2_TYPE_IS_MULTIPLANAR(type) \ - ((type) == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE \ - || (type) == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) - -#define V4L2_TYPE_IS_OUTPUT(type) \ - ((type) == V4L2_BUF_TYPE_VIDEO_OUTPUT \ - || (type) == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE \ - || (type) == V4L2_BUF_TYPE_VIDEO_OVERLAY \ - || (type) == V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY \ - || (type) == V4L2_BUF_TYPE_VBI_OUTPUT \ - || (type) == V4L2_BUF_TYPE_SLICED_VBI_OUTPUT) - -enum v4l2_tuner_type { - V4L2_TUNER_RADIO = 1, - V4L2_TUNER_ANALOG_TV = 2, - V4L2_TUNER_DIGITAL_TV = 3, -}; - -enum v4l2_memory { - V4L2_MEMORY_MMAP = 1, - V4L2_MEMORY_USERPTR = 2, - V4L2_MEMORY_OVERLAY = 3, -}; - -/* see also http://vektor.theorem.ca/graphics/ycbcr/ */ -enum v4l2_colorspace { - /* ITU-R 601 -- broadcast NTSC/PAL */ - V4L2_COLORSPACE_SMPTE170M = 1, - - /* 1125-Line (US) HDTV */ - V4L2_COLORSPACE_SMPTE240M = 2, - - /* HD and modern captures. */ - V4L2_COLORSPACE_REC709 = 3, - - /* broken BT878 extents (601, luma range 16-253 instead of 16-235) */ - V4L2_COLORSPACE_BT878 = 4, - - /* These should be useful. Assume 601 extents. */ - V4L2_COLORSPACE_470_SYSTEM_M = 5, - V4L2_COLORSPACE_470_SYSTEM_BG = 6, - - /* I know there will be cameras that send this. So, this is - * unspecified chromaticities and full 0-255 on each of the - * Y'CbCr components - */ - V4L2_COLORSPACE_JPEG = 7, - - /* For RGB colourspaces, this is probably a good start. */ - V4L2_COLORSPACE_SRGB = 8, -}; - -enum v4l2_priority { - V4L2_PRIORITY_UNSET = 0, /* not initialized */ - V4L2_PRIORITY_BACKGROUND = 1, - V4L2_PRIORITY_INTERACTIVE = 2, - V4L2_PRIORITY_RECORD = 3, - V4L2_PRIORITY_DEFAULT = V4L2_PRIORITY_INTERACTIVE, -}; - -struct v4l2_rect { - __s32 left; - __s32 top; - __s32 width; - __s32 height; -}; - -struct v4l2_fract { - __u32 numerator; - __u32 denominator; -}; - -/** - * struct v4l2_capability - Describes V4L2 device caps returned by VIDIOC_QUERYCAP - * - * @driver: name of the driver module (e.g. "bttv") - * @card: name of the card (e.g. "Hauppauge WinTV") - * @bus_info: name of the bus (e.g. "PCI:" + pci_name(pci_dev) ) - * @version: KERNEL_VERSION - * @capabilities: capabilities of the physical device as a whole - * @device_caps: capabilities accessed via this particular device (node) - * @reserved: reserved fields for future extensions - */ -struct v4l2_capability { - __u8 driver[16]; - __u8 card[32]; - __u8 bus_info[32]; - __u32 version; - __u32 capabilities; - __u32 device_caps; - __u32 reserved[3]; -}; - -/* Values for 'capabilities' field */ -#define V4L2_CAP_VIDEO_CAPTURE 0x00000001 /* Is a video capture device */ -#define V4L2_CAP_VIDEO_OUTPUT 0x00000002 /* Is a video output device */ -#define V4L2_CAP_VIDEO_OVERLAY 0x00000004 /* Can do video overlay */ -#define V4L2_CAP_VBI_CAPTURE 0x00000010 /* Is a raw VBI capture device */ -#define V4L2_CAP_VBI_OUTPUT 0x00000020 /* Is a raw VBI output device */ -#define V4L2_CAP_SLICED_VBI_CAPTURE 0x00000040 /* Is a sliced VBI capture device */ -#define V4L2_CAP_SLICED_VBI_OUTPUT 0x00000080 /* Is a sliced VBI output device */ -#define V4L2_CAP_RDS_CAPTURE 0x00000100 /* RDS data capture */ -#define V4L2_CAP_VIDEO_OUTPUT_OVERLAY 0x00000200 /* Can do video output overlay */ -#define V4L2_CAP_HW_FREQ_SEEK 0x00000400 /* Can do hardware frequency seek */ -#define V4L2_CAP_RDS_OUTPUT 0x00000800 /* Is an RDS encoder */ - -/* Is a video capture device that supports multiplanar formats */ -#define V4L2_CAP_VIDEO_CAPTURE_MPLANE 0x00001000 -/* Is a video output device that supports multiplanar formats */ -#define V4L2_CAP_VIDEO_OUTPUT_MPLANE 0x00002000 -/* Is a video mem-to-mem device that supports multiplanar formats */ -#define V4L2_CAP_VIDEO_M2M_MPLANE 0x00004000 -/* Is a video mem-to-mem device */ -#define V4L2_CAP_VIDEO_M2M 0x00008000 - -#define V4L2_CAP_TUNER 0x00010000 /* has a tuner */ -#define V4L2_CAP_AUDIO 0x00020000 /* has audio support */ -#define V4L2_CAP_RADIO 0x00040000 /* is a radio device */ -#define V4L2_CAP_MODULATOR 0x00080000 /* has a modulator */ - -#define V4L2_CAP_READWRITE 0x01000000 /* read/write systemcalls */ -#define V4L2_CAP_ASYNCIO 0x02000000 /* async I/O */ -#define V4L2_CAP_STREAMING 0x04000000 /* streaming I/O ioctls */ - -#define V4L2_CAP_DEVICE_CAPS 0x80000000 /* sets device capabilities field */ - -/* - * V I D E O I M A G E F O R M A T - */ -struct v4l2_pix_format { - __u32 width; - __u32 height; - __u32 pixelformat; - __u32 field; /* enum v4l2_field */ - __u32 bytesperline; /* for padding, zero if unused */ - __u32 sizeimage; - __u32 colorspace; /* enum v4l2_colorspace */ - __u32 priv; /* private data, depends on pixelformat */ -}; - -/* Pixel format FOURCC depth Description */ - -/* RGB formats */ -#define V4L2_PIX_FMT_RGB332 v4l2_fourcc('R', 'G', 'B', '1') /* 8 RGB-3-3-2 */ -#define V4L2_PIX_FMT_RGB444 v4l2_fourcc('R', '4', '4', '4') /* 16 xxxxrrrr ggggbbbb */ -#define V4L2_PIX_FMT_RGB555 v4l2_fourcc('R', 'G', 'B', 'O') /* 16 RGB-5-5-5 */ -#define V4L2_PIX_FMT_RGB565 v4l2_fourcc('R', 'G', 'B', 'P') /* 16 RGB-5-6-5 */ -#define V4L2_PIX_FMT_RGB555X v4l2_fourcc('R', 'G', 'B', 'Q') /* 16 RGB-5-5-5 BE */ -#define V4L2_PIX_FMT_RGB565X v4l2_fourcc('R', 'G', 'B', 'R') /* 16 RGB-5-6-5 BE */ -#define V4L2_PIX_FMT_BGR666 v4l2_fourcc('B', 'G', 'R', 'H') /* 18 BGR-6-6-6 */ -#define V4L2_PIX_FMT_BGR24 v4l2_fourcc('B', 'G', 'R', '3') /* 24 BGR-8-8-8 */ -#define V4L2_PIX_FMT_RGB24 v4l2_fourcc('R', 'G', 'B', '3') /* 24 RGB-8-8-8 */ -#define V4L2_PIX_FMT_BGR32 v4l2_fourcc('B', 'G', 'R', '4') /* 32 BGR-8-8-8-8 */ -#define V4L2_PIX_FMT_RGB32 v4l2_fourcc('R', 'G', 'B', '4') /* 32 RGB-8-8-8-8 */ - -/* Grey formats */ -#define V4L2_PIX_FMT_GREY v4l2_fourcc('G', 'R', 'E', 'Y') /* 8 Greyscale */ -#define V4L2_PIX_FMT_Y4 v4l2_fourcc('Y', '0', '4', ' ') /* 4 Greyscale */ -#define V4L2_PIX_FMT_Y6 v4l2_fourcc('Y', '0', '6', ' ') /* 6 Greyscale */ -#define V4L2_PIX_FMT_Y10 v4l2_fourcc('Y', '1', '0', ' ') /* 10 Greyscale */ -#define V4L2_PIX_FMT_Y12 v4l2_fourcc('Y', '1', '2', ' ') /* 12 Greyscale */ -#define V4L2_PIX_FMT_Y16 v4l2_fourcc('Y', '1', '6', ' ') /* 16 Greyscale */ - -/* Grey bit-packed formats */ -#define V4L2_PIX_FMT_Y10BPACK v4l2_fourcc('Y', '1', '0', 'B') /* 10 Greyscale bit-packed */ - -/* Palette formats */ -#define V4L2_PIX_FMT_PAL8 v4l2_fourcc('P', 'A', 'L', '8') /* 8 8-bit palette */ - -/* Luminance+Chrominance formats */ -#define V4L2_PIX_FMT_YVU410 v4l2_fourcc('Y', 'V', 'U', '9') /* 9 YVU 4:1:0 */ -#define V4L2_PIX_FMT_YVU420 v4l2_fourcc('Y', 'V', '1', '2') /* 12 YVU 4:2:0 */ -#define V4L2_PIX_FMT_YUYV v4l2_fourcc('Y', 'U', 'Y', 'V') /* 16 YUV 4:2:2 */ -#define V4L2_PIX_FMT_YYUV v4l2_fourcc('Y', 'Y', 'U', 'V') /* 16 YUV 4:2:2 */ -#define V4L2_PIX_FMT_YVYU v4l2_fourcc('Y', 'V', 'Y', 'U') /* 16 YVU 4:2:2 */ -#define V4L2_PIX_FMT_UYVY v4l2_fourcc('U', 'Y', 'V', 'Y') /* 16 YUV 4:2:2 */ -#define V4L2_PIX_FMT_VYUY v4l2_fourcc('V', 'Y', 'U', 'Y') /* 16 YUV 4:2:2 */ -#define V4L2_PIX_FMT_YUV422P v4l2_fourcc('4', '2', '2', 'P') /* 16 YVU422 planar */ -#define V4L2_PIX_FMT_YUV411P v4l2_fourcc('4', '1', '1', 'P') /* 16 YVU411 planar */ -#define V4L2_PIX_FMT_Y41P v4l2_fourcc('Y', '4', '1', 'P') /* 12 YUV 4:1:1 */ -#define V4L2_PIX_FMT_YUV444 v4l2_fourcc('Y', '4', '4', '4') /* 16 xxxxyyyy uuuuvvvv */ -#define V4L2_PIX_FMT_YUV555 v4l2_fourcc('Y', 'U', 'V', 'O') /* 16 YUV-5-5-5 */ -#define V4L2_PIX_FMT_YUV565 v4l2_fourcc('Y', 'U', 'V', 'P') /* 16 YUV-5-6-5 */ -#define V4L2_PIX_FMT_YUV32 v4l2_fourcc('Y', 'U', 'V', '4') /* 32 YUV-8-8-8-8 */ -#define V4L2_PIX_FMT_YUV410 v4l2_fourcc('Y', 'U', 'V', '9') /* 9 YUV 4:1:0 */ -#define V4L2_PIX_FMT_YUV420 v4l2_fourcc('Y', 'U', '1', '2') /* 12 YUV 4:2:0 */ -#define V4L2_PIX_FMT_HI240 v4l2_fourcc('H', 'I', '2', '4') /* 8 8-bit color */ -#define V4L2_PIX_FMT_HM12 v4l2_fourcc('H', 'M', '1', '2') /* 8 YUV 4:2:0 16x16 macroblocks */ -#define V4L2_PIX_FMT_M420 v4l2_fourcc('M', '4', '2', '0') /* 12 YUV 4:2:0 2 lines y, 1 line uv interleaved */ - -/* two planes -- one Y, one Cr + Cb interleaved */ -#define V4L2_PIX_FMT_NV12 v4l2_fourcc('N', 'V', '1', '2') /* 12 Y/CbCr 4:2:0 */ -#define V4L2_PIX_FMT_NV21 v4l2_fourcc('N', 'V', '2', '1') /* 12 Y/CrCb 4:2:0 */ -#define V4L2_PIX_FMT_NV16 v4l2_fourcc('N', 'V', '1', '6') /* 16 Y/CbCr 4:2:2 */ -#define V4L2_PIX_FMT_NV61 v4l2_fourcc('N', 'V', '6', '1') /* 16 Y/CrCb 4:2:2 */ -#define V4L2_PIX_FMT_NV24 v4l2_fourcc('N', 'V', '2', '4') /* 24 Y/CbCr 4:4:4 */ -#define V4L2_PIX_FMT_NV42 v4l2_fourcc('N', 'V', '4', '2') /* 24 Y/CrCb 4:4:4 */ - -/* two non contiguous planes - one Y, one Cr + Cb interleaved */ -#define V4L2_PIX_FMT_NV12M v4l2_fourcc('N', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 */ -#define V4L2_PIX_FMT_NV12MT v4l2_fourcc('T', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 64x32 macroblocks */ - -/* three non contiguous planes - Y, Cb, Cr */ -#define V4L2_PIX_FMT_YUV420M v4l2_fourcc('Y', 'M', '1', '2') /* 12 YUV420 planar */ -#define V4L2_PIX_FMT_YVU420M v4l2_fourcc('Y', 'M', '2', '1') /* 12 YVU420 planar */ - -/* Bayer formats - see http://www.siliconimaging.com/RGB%20Bayer.htm */ -#define V4L2_PIX_FMT_SBGGR8 v4l2_fourcc('B', 'A', '8', '1') /* 8 BGBG.. GRGR.. */ -#define V4L2_PIX_FMT_SGBRG8 v4l2_fourcc('G', 'B', 'R', 'G') /* 8 GBGB.. RGRG.. */ -#define V4L2_PIX_FMT_SGRBG8 v4l2_fourcc('G', 'R', 'B', 'G') /* 8 GRGR.. BGBG.. */ -#define V4L2_PIX_FMT_SRGGB8 v4l2_fourcc('R', 'G', 'G', 'B') /* 8 RGRG.. GBGB.. */ -#define V4L2_PIX_FMT_SBGGR10 v4l2_fourcc('B', 'G', '1', '0') /* 10 BGBG.. GRGR.. */ -#define V4L2_PIX_FMT_SGBRG10 v4l2_fourcc('G', 'B', '1', '0') /* 10 GBGB.. RGRG.. */ -#define V4L2_PIX_FMT_SGRBG10 v4l2_fourcc('B', 'A', '1', '0') /* 10 GRGR.. BGBG.. */ -#define V4L2_PIX_FMT_SRGGB10 v4l2_fourcc('R', 'G', '1', '0') /* 10 RGRG.. GBGB.. */ -#define V4L2_PIX_FMT_SBGGR12 v4l2_fourcc('B', 'G', '1', '2') /* 12 BGBG.. GRGR.. */ -#define V4L2_PIX_FMT_SGBRG12 v4l2_fourcc('G', 'B', '1', '2') /* 12 GBGB.. RGRG.. */ -#define V4L2_PIX_FMT_SGRBG12 v4l2_fourcc('B', 'A', '1', '2') /* 12 GRGR.. BGBG.. */ -#define V4L2_PIX_FMT_SRGGB12 v4l2_fourcc('R', 'G', '1', '2') /* 12 RGRG.. GBGB.. */ - /* 10bit raw bayer DPCM compressed to 8 bits */ -#define V4L2_PIX_FMT_SBGGR10DPCM8 v4l2_fourcc('b', 'B', 'A', '8') -#define V4L2_PIX_FMT_SGBRG10DPCM8 v4l2_fourcc('b', 'G', 'A', '8') -#define V4L2_PIX_FMT_SGRBG10DPCM8 v4l2_fourcc('B', 'D', '1', '0') -#define V4L2_PIX_FMT_SRGGB10DPCM8 v4l2_fourcc('b', 'R', 'A', '8') - /* - * 10bit raw bayer, expanded to 16 bits - * xxxxrrrrrrrrrrxxxxgggggggggg xxxxggggggggggxxxxbbbbbbbbbb... - */ -#define V4L2_PIX_FMT_SBGGR16 v4l2_fourcc('B', 'Y', 'R', '2') /* 16 BGBG.. GRGR.. */ - -/* compressed formats */ -#define V4L2_PIX_FMT_MJPEG v4l2_fourcc('M', 'J', 'P', 'G') /* Motion-JPEG */ -#define V4L2_PIX_FMT_JPEG v4l2_fourcc('J', 'P', 'E', 'G') /* JFIF JPEG */ -#define V4L2_PIX_FMT_DV v4l2_fourcc('d', 'v', 's', 'd') /* 1394 */ -#define V4L2_PIX_FMT_MPEG v4l2_fourcc('M', 'P', 'E', 'G') /* MPEG-1/2/4 Multiplexed */ -#define V4L2_PIX_FMT_H264 v4l2_fourcc('H', '2', '6', '4') /* H264 with start codes */ -#define V4L2_PIX_FMT_H264_NO_SC v4l2_fourcc('A', 'V', 'C', '1') /* H264 without start codes */ -#define V4L2_PIX_FMT_H263 v4l2_fourcc('H', '2', '6', '3') /* H263 */ -#define V4L2_PIX_FMT_MPEG1 v4l2_fourcc('M', 'P', 'G', '1') /* MPEG-1 ES */ -#define V4L2_PIX_FMT_MPEG2 v4l2_fourcc('M', 'P', 'G', '2') /* MPEG-2 ES */ -#define V4L2_PIX_FMT_MPEG4 v4l2_fourcc('M', 'P', 'G', '4') /* MPEG-4 ES */ -#define V4L2_PIX_FMT_XVID v4l2_fourcc('X', 'V', 'I', 'D') /* Xvid */ -#define V4L2_PIX_FMT_VC1_ANNEX_G v4l2_fourcc('V', 'C', '1', 'G') /* SMPTE 421M Annex G compliant stream */ -#define V4L2_PIX_FMT_VC1_ANNEX_L v4l2_fourcc('V', 'C', '1', 'L') /* SMPTE 421M Annex L compliant stream */ - -/* Vendor-specific formats */ -#define V4L2_PIX_FMT_CPIA1 v4l2_fourcc('C', 'P', 'I', 'A') /* cpia1 YUV */ -#define V4L2_PIX_FMT_WNVA v4l2_fourcc('W', 'N', 'V', 'A') /* Winnov hw compress */ -#define V4L2_PIX_FMT_SN9C10X v4l2_fourcc('S', '9', '1', '0') /* SN9C10x compression */ -#define V4L2_PIX_FMT_SN9C20X_I420 v4l2_fourcc('S', '9', '2', '0') /* SN9C20x YUV 4:2:0 */ -#define V4L2_PIX_FMT_PWC1 v4l2_fourcc('P', 'W', 'C', '1') /* pwc older webcam */ -#define V4L2_PIX_FMT_PWC2 v4l2_fourcc('P', 'W', 'C', '2') /* pwc newer webcam */ -#define V4L2_PIX_FMT_ET61X251 v4l2_fourcc('E', '6', '2', '5') /* ET61X251 compression */ -#define V4L2_PIX_FMT_SPCA501 v4l2_fourcc('S', '5', '0', '1') /* YUYV per line */ -#define V4L2_PIX_FMT_SPCA505 v4l2_fourcc('S', '5', '0', '5') /* YYUV per line */ -#define V4L2_PIX_FMT_SPCA508 v4l2_fourcc('S', '5', '0', '8') /* YUVY per line */ -#define V4L2_PIX_FMT_SPCA561 v4l2_fourcc('S', '5', '6', '1') /* compressed GBRG bayer */ -#define V4L2_PIX_FMT_PAC207 v4l2_fourcc('P', '2', '0', '7') /* compressed BGGR bayer */ -#define V4L2_PIX_FMT_MR97310A v4l2_fourcc('M', '3', '1', '0') /* compressed BGGR bayer */ -#define V4L2_PIX_FMT_JL2005BCD v4l2_fourcc('J', 'L', '2', '0') /* compressed RGGB bayer */ -#define V4L2_PIX_FMT_SN9C2028 v4l2_fourcc('S', 'O', 'N', 'X') /* compressed GBRG bayer */ -#define V4L2_PIX_FMT_SQ905C v4l2_fourcc('9', '0', '5', 'C') /* compressed RGGB bayer */ -#define V4L2_PIX_FMT_PJPG v4l2_fourcc('P', 'J', 'P', 'G') /* Pixart 73xx JPEG */ -#define V4L2_PIX_FMT_OV511 v4l2_fourcc('O', '5', '1', '1') /* ov511 JPEG */ -#define V4L2_PIX_FMT_OV518 v4l2_fourcc('O', '5', '1', '8') /* ov518 JPEG */ -#define V4L2_PIX_FMT_STV0680 v4l2_fourcc('S', '6', '8', '0') /* stv0680 bayer */ -#define V4L2_PIX_FMT_TM6000 v4l2_fourcc('T', 'M', '6', '0') /* tm5600/tm60x0 */ -#define V4L2_PIX_FMT_CIT_YYVYUY v4l2_fourcc('C', 'I', 'T', 'V') /* one line of Y then 1 line of VYUY */ -#define V4L2_PIX_FMT_KONICA420 v4l2_fourcc('K', 'O', 'N', 'I') /* YUV420 planar in blocks of 256 pixels */ -#define V4L2_PIX_FMT_JPGL v4l2_fourcc('J', 'P', 'G', 'L') /* JPEG-Lite */ -#define V4L2_PIX_FMT_SE401 v4l2_fourcc('S', '4', '0', '1') /* se401 janggu compressed rgb */ - -/* - * F O R M A T E N U M E R A T I O N - */ -struct v4l2_fmtdesc { - __u32 index; /* Format number */ - __u32 type; /* enum v4l2_buf_type */ - __u32 flags; - __u8 description[32]; /* Description string */ - __u32 pixelformat; /* Format fourcc */ - __u32 reserved[4]; -}; - -#define V4L2_FMT_FLAG_COMPRESSED 0x0001 -#define V4L2_FMT_FLAG_EMULATED 0x0002 - -#if 1 - /* Experimental Frame Size and frame rate enumeration */ -/* - * F R A M E S I Z E E N U M E R A T I O N - */ -enum v4l2_frmsizetypes { - V4L2_FRMSIZE_TYPE_DISCRETE = 1, - V4L2_FRMSIZE_TYPE_CONTINUOUS = 2, - V4L2_FRMSIZE_TYPE_STEPWISE = 3, -}; - -struct v4l2_frmsize_discrete { - __u32 width; /* Frame width [pixel] */ - __u32 height; /* Frame height [pixel] */ -}; - -struct v4l2_frmsize_stepwise { - __u32 min_width; /* Minimum frame width [pixel] */ - __u32 max_width; /* Maximum frame width [pixel] */ - __u32 step_width; /* Frame width step size [pixel] */ - __u32 min_height; /* Minimum frame height [pixel] */ - __u32 max_height; /* Maximum frame height [pixel] */ - __u32 step_height; /* Frame height step size [pixel] */ -}; - -struct v4l2_frmsizeenum { - __u32 index; /* Frame size number */ - __u32 pixel_format; /* Pixel format */ - __u32 type; /* Frame size type the device supports. */ - - union { /* Frame size */ - struct v4l2_frmsize_discrete discrete; - struct v4l2_frmsize_stepwise stepwise; - }; - - __u32 reserved[2]; /* Reserved space for future use */ -}; - -/* - * F R A M E R A T E E N U M E R A T I O N - */ -enum v4l2_frmivaltypes { - V4L2_FRMIVAL_TYPE_DISCRETE = 1, - V4L2_FRMIVAL_TYPE_CONTINUOUS = 2, - V4L2_FRMIVAL_TYPE_STEPWISE = 3, -}; - -struct v4l2_frmival_stepwise { - struct v4l2_fract min; /* Minimum frame interval [s] */ - struct v4l2_fract max; /* Maximum frame interval [s] */ - struct v4l2_fract step; /* Frame interval step size [s] */ -}; - -struct v4l2_frmivalenum { - __u32 index; /* Frame format index */ - __u32 pixel_format; /* Pixel format */ - __u32 width; /* Frame width */ - __u32 height; /* Frame height */ - __u32 type; /* Frame interval type the device supports. */ - - union { /* Frame interval */ - struct v4l2_fract discrete; - struct v4l2_frmival_stepwise stepwise; - }; - - __u32 reserved[2]; /* Reserved space for future use */ -}; -#endif - -/* - * T I M E C O D E - */ -struct v4l2_timecode { - __u32 type; - __u32 flags; - __u8 frames; - __u8 seconds; - __u8 minutes; - __u8 hours; - __u8 userbits[4]; -}; - -/* Type */ -#define V4L2_TC_TYPE_24FPS 1 -#define V4L2_TC_TYPE_25FPS 2 -#define V4L2_TC_TYPE_30FPS 3 -#define V4L2_TC_TYPE_50FPS 4 -#define V4L2_TC_TYPE_60FPS 5 - -/* Flags */ -#define V4L2_TC_FLAG_DROPFRAME 0x0001 /* "drop-frame" mode */ -#define V4L2_TC_FLAG_COLORFRAME 0x0002 -#define V4L2_TC_USERBITS_field 0x000C -#define V4L2_TC_USERBITS_USERDEFINED 0x0000 -#define V4L2_TC_USERBITS_8BITCHARS 0x0008 -/* The above is based on SMPTE timecodes */ - -struct v4l2_jpegcompression { - int quality; - - int APPn; /* Number of APP segment to be written, - * must be 0..15 */ - int APP_len; /* Length of data in JPEG APPn segment */ - char APP_data[60]; /* Data in the JPEG APPn segment. */ - - int COM_len; /* Length of data in JPEG COM segment */ - char COM_data[60]; /* Data in JPEG COM segment */ - - __u32 jpeg_markers; /* Which markers should go into the JPEG - * output. Unless you exactly know what - * you do, leave them untouched. - * Inluding less markers will make the - * resulting code smaller, but there will - * be fewer applications which can read it. - * The presence of the APP and COM marker - * is influenced by APP_len and COM_len - * ONLY, not by this property! */ - -#define V4L2_JPEG_MARKER_DHT (1<<3) /* Define Huffman Tables */ -#define V4L2_JPEG_MARKER_DQT (1<<4) /* Define Quantization Tables */ -#define V4L2_JPEG_MARKER_DRI (1<<5) /* Define Restart Interval */ -#define V4L2_JPEG_MARKER_COM (1<<6) /* Comment segment */ -#define V4L2_JPEG_MARKER_APP (1<<7) /* App segment, driver will - * allways use APP0 */ -}; - -/* - * M E M O R Y - M A P P I N G B U F F E R S - */ -struct v4l2_requestbuffers { - __u32 count; - __u32 type; /* enum v4l2_buf_type */ - __u32 memory; /* enum v4l2_memory */ - __u32 reserved[2]; -}; - -/** - * struct v4l2_plane - plane info for multi-planar buffers - * @bytesused: number of bytes occupied by data in the plane (payload) - * @length: size of this plane (NOT the payload) in bytes - * @mem_offset: when memory in the associated struct v4l2_buffer is - * V4L2_MEMORY_MMAP, equals the offset from the start of - * the device memory for this plane (or is a "cookie" that - * should be passed to mmap() called on the video node) - * @userptr: when memory is V4L2_MEMORY_USERPTR, a userspace pointer - * pointing to this plane - * @data_offset: offset in the plane to the start of data; usually 0, - * unless there is a header in front of the data - * - * Multi-planar buffers consist of one or more planes, e.g. an YCbCr buffer - * with two planes can have one plane for Y, and another for interleaved CbCr - * components. Each plane can reside in a separate memory buffer, or even in - * a completely separate memory node (e.g. in embedded devices). - */ -struct v4l2_plane { - __u32 bytesused; - __u32 length; - union { - __u32 mem_offset; - unsigned long userptr; - } m; - __u32 data_offset; - __u32 reserved[11]; -}; - -/** - * struct v4l2_buffer - video buffer info - * @index: id number of the buffer - * @type: enum v4l2_buf_type; buffer type (type == *_MPLANE for - * multiplanar buffers); - * @bytesused: number of bytes occupied by data in the buffer (payload); - * unused (set to 0) for multiplanar buffers - * @flags: buffer informational flags - * @field: enum v4l2_field; field order of the image in the buffer - * @timestamp: frame timestamp - * @timecode: frame timecode - * @sequence: sequence count of this frame - * @memory: enum v4l2_memory; the method, in which the actual video data is - * passed - * @offset: for non-multiplanar buffers with memory == V4L2_MEMORY_MMAP; - * offset from the start of the device memory for this plane, - * (or a "cookie" that should be passed to mmap() as offset) - * @userptr: for non-multiplanar buffers with memory == V4L2_MEMORY_USERPTR; - * a userspace pointer pointing to this buffer - * @planes: for multiplanar buffers; userspace pointer to the array of plane - * info structs for this buffer - * @length: size in bytes of the buffer (NOT its payload) for single-plane - * buffers (when type != *_MPLANE); number of elements in the - * planes array for multi-plane buffers - * @input: input number from which the video data has has been captured - * - * Contains data exchanged by application and driver using one of the Streaming - * I/O methods. - */ -struct v4l2_buffer { - __u32 index; - __u32 type; - __u32 bytesused; - __u32 flags; - __u32 field; - struct timeval timestamp; - struct v4l2_timecode timecode; - __u32 sequence; - - /* memory location */ - __u32 memory; - union { - __u32 offset; - unsigned long userptr; - struct v4l2_plane *planes; - } m; - __u32 length; - __u32 reserved2; - __u32 reserved; -}; - -/* Flags for 'flags' field */ -#define V4L2_BUF_FLAG_MAPPED 0x0001 /* Buffer is mapped (flag) */ -#define V4L2_BUF_FLAG_QUEUED 0x0002 /* Buffer is queued for processing */ -#define V4L2_BUF_FLAG_DONE 0x0004 /* Buffer is ready */ -#define V4L2_BUF_FLAG_KEYFRAME 0x0008 /* Image is a keyframe (I-frame) */ -#define V4L2_BUF_FLAG_PFRAME 0x0010 /* Image is a P-frame */ -#define V4L2_BUF_FLAG_BFRAME 0x0020 /* Image is a B-frame */ -/* Buffer is ready, but the data contained within is corrupted. */ -#define V4L2_BUF_FLAG_ERROR 0x0040 -#define V4L2_BUF_FLAG_TIMECODE 0x0100 /* timecode field is valid */ -#define V4L2_BUF_FLAG_PREPARED 0x0400 /* Buffer is prepared for queuing */ -/* Cache handling flags */ -#define V4L2_BUF_FLAG_NO_CACHE_INVALIDATE 0x0800 -#define V4L2_BUF_FLAG_NO_CACHE_CLEAN 0x1000 - -/* - * O V E R L A Y P R E V I E W - */ -struct v4l2_framebuffer { - __u32 capability; - __u32 flags; -/* FIXME: in theory we should pass something like PCI device + memory - * region + offset instead of some physical address */ - void *base; - struct v4l2_pix_format fmt; -}; -/* Flags for the 'capability' field. Read only */ -#define V4L2_FBUF_CAP_EXTERNOVERLAY 0x0001 -#define V4L2_FBUF_CAP_CHROMAKEY 0x0002 -#define V4L2_FBUF_CAP_LIST_CLIPPING 0x0004 -#define V4L2_FBUF_CAP_BITMAP_CLIPPING 0x0008 -#define V4L2_FBUF_CAP_LOCAL_ALPHA 0x0010 -#define V4L2_FBUF_CAP_GLOBAL_ALPHA 0x0020 -#define V4L2_FBUF_CAP_LOCAL_INV_ALPHA 0x0040 -#define V4L2_FBUF_CAP_SRC_CHROMAKEY 0x0080 -/* Flags for the 'flags' field. */ -#define V4L2_FBUF_FLAG_PRIMARY 0x0001 -#define V4L2_FBUF_FLAG_OVERLAY 0x0002 -#define V4L2_FBUF_FLAG_CHROMAKEY 0x0004 -#define V4L2_FBUF_FLAG_LOCAL_ALPHA 0x0008 -#define V4L2_FBUF_FLAG_GLOBAL_ALPHA 0x0010 -#define V4L2_FBUF_FLAG_LOCAL_INV_ALPHA 0x0020 -#define V4L2_FBUF_FLAG_SRC_CHROMAKEY 0x0040 - -struct v4l2_clip { - struct v4l2_rect c; - struct v4l2_clip __user *next; -}; - -struct v4l2_window { - struct v4l2_rect w; - __u32 field; /* enum v4l2_field */ - __u32 chromakey; - struct v4l2_clip __user *clips; - __u32 clipcount; - void __user *bitmap; - __u8 global_alpha; -}; - -/* - * C A P T U R E P A R A M E T E R S - */ -struct v4l2_captureparm { - __u32 capability; /* Supported modes */ - __u32 capturemode; /* Current mode */ - struct v4l2_fract timeperframe; /* Time per frame in .1us units */ - __u32 extendedmode; /* Driver-specific extensions */ - __u32 readbuffers; /* # of buffers for read */ - __u32 reserved[4]; -}; - -/* Flags for 'capability' and 'capturemode' fields */ -#define V4L2_MODE_HIGHQUALITY 0x0001 /* High quality imaging mode */ -#define V4L2_CAP_TIMEPERFRAME 0x1000 /* timeperframe field is supported */ - -struct v4l2_outputparm { - __u32 capability; /* Supported modes */ - __u32 outputmode; /* Current mode */ - struct v4l2_fract timeperframe; /* Time per frame in seconds */ - __u32 extendedmode; /* Driver-specific extensions */ - __u32 writebuffers; /* # of buffers for write */ - __u32 reserved[4]; -}; - -/* - * I N P U T I M A G E C R O P P I N G - */ -struct v4l2_cropcap { - __u32 type; /* enum v4l2_buf_type */ - struct v4l2_rect bounds; - struct v4l2_rect defrect; - struct v4l2_fract pixelaspect; -}; - -struct v4l2_crop { - __u32 type; /* enum v4l2_buf_type */ - struct v4l2_rect c; -}; - -/** - * struct v4l2_selection - selection info - * @type: buffer type (do not use *_MPLANE types) - * @target: Selection target, used to choose one of possible rectangles; - * defined in v4l2-common.h; V4L2_SEL_TGT_* . - * @flags: constraints flags, defined in v4l2-common.h; V4L2_SEL_FLAG_*. - * @r: coordinates of selection window - * @reserved: for future use, rounds structure size to 64 bytes, set to zero - * - * Hardware may use multiple helper windows to process a video stream. - * The structure is used to exchange this selection areas between - * an application and a driver. - */ -struct v4l2_selection { - __u32 type; - __u32 target; - __u32 flags; - struct v4l2_rect r; - __u32 reserved[9]; -}; - - -/* - * A N A L O G V I D E O S T A N D A R D - */ - -typedef __u64 v4l2_std_id; - -/* one bit for each */ -#define V4L2_STD_PAL_B ((v4l2_std_id)0x00000001) -#define V4L2_STD_PAL_B1 ((v4l2_std_id)0x00000002) -#define V4L2_STD_PAL_G ((v4l2_std_id)0x00000004) -#define V4L2_STD_PAL_H ((v4l2_std_id)0x00000008) -#define V4L2_STD_PAL_I ((v4l2_std_id)0x00000010) -#define V4L2_STD_PAL_D ((v4l2_std_id)0x00000020) -#define V4L2_STD_PAL_D1 ((v4l2_std_id)0x00000040) -#define V4L2_STD_PAL_K ((v4l2_std_id)0x00000080) - -#define V4L2_STD_PAL_M ((v4l2_std_id)0x00000100) -#define V4L2_STD_PAL_N ((v4l2_std_id)0x00000200) -#define V4L2_STD_PAL_Nc ((v4l2_std_id)0x00000400) -#define V4L2_STD_PAL_60 ((v4l2_std_id)0x00000800) - -#define V4L2_STD_NTSC_M ((v4l2_std_id)0x00001000) /* BTSC */ -#define V4L2_STD_NTSC_M_JP ((v4l2_std_id)0x00002000) /* EIA-J */ -#define V4L2_STD_NTSC_443 ((v4l2_std_id)0x00004000) -#define V4L2_STD_NTSC_M_KR ((v4l2_std_id)0x00008000) /* FM A2 */ - -#define V4L2_STD_SECAM_B ((v4l2_std_id)0x00010000) -#define V4L2_STD_SECAM_D ((v4l2_std_id)0x00020000) -#define V4L2_STD_SECAM_G ((v4l2_std_id)0x00040000) -#define V4L2_STD_SECAM_H ((v4l2_std_id)0x00080000) -#define V4L2_STD_SECAM_K ((v4l2_std_id)0x00100000) -#define V4L2_STD_SECAM_K1 ((v4l2_std_id)0x00200000) -#define V4L2_STD_SECAM_L ((v4l2_std_id)0x00400000) -#define V4L2_STD_SECAM_LC ((v4l2_std_id)0x00800000) - -/* ATSC/HDTV */ -#define V4L2_STD_ATSC_8_VSB ((v4l2_std_id)0x01000000) -#define V4L2_STD_ATSC_16_VSB ((v4l2_std_id)0x02000000) - -/* FIXME: - Although std_id is 64 bits, there is an issue on PPC32 architecture that - makes switch(__u64) to break. So, there's a hack on v4l2-common.c rounding - this value to 32 bits. - As, currently, the max value is for V4L2_STD_ATSC_16_VSB (30 bits wide), - it should work fine. However, if needed to add more than two standards, - v4l2-common.c should be fixed. - */ - -/* - * Some macros to merge video standards in order to make live easier for the - * drivers and V4L2 applications - */ - -/* - * "Common" NTSC/M - It should be noticed that V4L2_STD_NTSC_443 is - * Missing here. - */ -#define V4L2_STD_NTSC (V4L2_STD_NTSC_M |\ - V4L2_STD_NTSC_M_JP |\ - V4L2_STD_NTSC_M_KR) -/* Secam macros */ -#define V4L2_STD_SECAM_DK (V4L2_STD_SECAM_D |\ - V4L2_STD_SECAM_K |\ - V4L2_STD_SECAM_K1) -/* All Secam Standards */ -#define V4L2_STD_SECAM (V4L2_STD_SECAM_B |\ - V4L2_STD_SECAM_G |\ - V4L2_STD_SECAM_H |\ - V4L2_STD_SECAM_DK |\ - V4L2_STD_SECAM_L |\ - V4L2_STD_SECAM_LC) -/* PAL macros */ -#define V4L2_STD_PAL_BG (V4L2_STD_PAL_B |\ - V4L2_STD_PAL_B1 |\ - V4L2_STD_PAL_G) -#define V4L2_STD_PAL_DK (V4L2_STD_PAL_D |\ - V4L2_STD_PAL_D1 |\ - V4L2_STD_PAL_K) -/* - * "Common" PAL - This macro is there to be compatible with the old - * V4L1 concept of "PAL": /BGDKHI. - * Several PAL standards are mising here: /M, /N and /Nc - */ -#define V4L2_STD_PAL (V4L2_STD_PAL_BG |\ - V4L2_STD_PAL_DK |\ - V4L2_STD_PAL_H |\ - V4L2_STD_PAL_I) -/* Chroma "agnostic" standards */ -#define V4L2_STD_B (V4L2_STD_PAL_B |\ - V4L2_STD_PAL_B1 |\ - V4L2_STD_SECAM_B) -#define V4L2_STD_G (V4L2_STD_PAL_G |\ - V4L2_STD_SECAM_G) -#define V4L2_STD_H (V4L2_STD_PAL_H |\ - V4L2_STD_SECAM_H) -#define V4L2_STD_L (V4L2_STD_SECAM_L |\ - V4L2_STD_SECAM_LC) -#define V4L2_STD_GH (V4L2_STD_G |\ - V4L2_STD_H) -#define V4L2_STD_DK (V4L2_STD_PAL_DK |\ - V4L2_STD_SECAM_DK) -#define V4L2_STD_BG (V4L2_STD_B |\ - V4L2_STD_G) -#define V4L2_STD_MN (V4L2_STD_PAL_M |\ - V4L2_STD_PAL_N |\ - V4L2_STD_PAL_Nc |\ - V4L2_STD_NTSC) - -/* Standards where MTS/BTSC stereo could be found */ -#define V4L2_STD_MTS (V4L2_STD_NTSC_M |\ - V4L2_STD_PAL_M |\ - V4L2_STD_PAL_N |\ - V4L2_STD_PAL_Nc) - -/* Standards for Countries with 60Hz Line frequency */ -#define V4L2_STD_525_60 (V4L2_STD_PAL_M |\ - V4L2_STD_PAL_60 |\ - V4L2_STD_NTSC |\ - V4L2_STD_NTSC_443) -/* Standards for Countries with 50Hz Line frequency */ -#define V4L2_STD_625_50 (V4L2_STD_PAL |\ - V4L2_STD_PAL_N |\ - V4L2_STD_PAL_Nc |\ - V4L2_STD_SECAM) - -#define V4L2_STD_ATSC (V4L2_STD_ATSC_8_VSB |\ - V4L2_STD_ATSC_16_VSB) -/* Macros with none and all analog standards */ -#define V4L2_STD_UNKNOWN 0 -#define V4L2_STD_ALL (V4L2_STD_525_60 |\ - V4L2_STD_625_50) - -struct v4l2_standard { - __u32 index; - v4l2_std_id id; - __u8 name[24]; - struct v4l2_fract frameperiod; /* Frames, not fields */ - __u32 framelines; - __u32 reserved[4]; -}; - -/* The DV Preset API is deprecated in favor of the DV Timings API. - New drivers shouldn't use this anymore! */ - -/* - * V I D E O T I M I N G S D V P R E S E T - */ -struct v4l2_dv_preset { - __u32 preset; - __u32 reserved[4]; -}; - -/* - * D V P R E S E T S E N U M E R A T I O N - */ -struct v4l2_dv_enum_preset { - __u32 index; - __u32 preset; - __u8 name[32]; /* Name of the preset timing */ - __u32 width; - __u32 height; - __u32 reserved[4]; -}; - -/* - * D V P R E S E T V A L U E S - */ -#define V4L2_DV_INVALID 0 -#define V4L2_DV_480P59_94 1 /* BT.1362 */ -#define V4L2_DV_576P50 2 /* BT.1362 */ -#define V4L2_DV_720P24 3 /* SMPTE 296M */ -#define V4L2_DV_720P25 4 /* SMPTE 296M */ -#define V4L2_DV_720P30 5 /* SMPTE 296M */ -#define V4L2_DV_720P50 6 /* SMPTE 296M */ -#define V4L2_DV_720P59_94 7 /* SMPTE 274M */ -#define V4L2_DV_720P60 8 /* SMPTE 274M/296M */ -#define V4L2_DV_1080I29_97 9 /* BT.1120/ SMPTE 274M */ -#define V4L2_DV_1080I30 10 /* BT.1120/ SMPTE 274M */ -#define V4L2_DV_1080I25 11 /* BT.1120 */ -#define V4L2_DV_1080I50 12 /* SMPTE 296M */ -#define V4L2_DV_1080I60 13 /* SMPTE 296M */ -#define V4L2_DV_1080P24 14 /* SMPTE 296M */ -#define V4L2_DV_1080P25 15 /* SMPTE 296M */ -#define V4L2_DV_1080P30 16 /* SMPTE 296M */ -#define V4L2_DV_1080P50 17 /* BT.1120 */ -#define V4L2_DV_1080P60 18 /* BT.1120 */ - -/* - * D V B T T I M I N G S - */ - -/** struct v4l2_bt_timings - BT.656/BT.1120 timing data - * @width: total width of the active video in pixels - * @height: total height of the active video in lines - * @interlaced: Interlaced or progressive - * @polarities: Positive or negative polarities - * @pixelclock: Pixel clock in HZ. Ex. 74.25MHz->74250000 - * @hfrontporch:Horizontal front porch in pixels - * @hsync: Horizontal Sync length in pixels - * @hbackporch: Horizontal back porch in pixels - * @vfrontporch:Vertical front porch in lines - * @vsync: Vertical Sync length in lines - * @vbackporch: Vertical back porch in lines - * @il_vfrontporch:Vertical front porch for the even field - * (aka field 2) of interlaced field formats - * @il_vsync: Vertical Sync length for the even field - * (aka field 2) of interlaced field formats - * @il_vbackporch:Vertical back porch for the even field - * (aka field 2) of interlaced field formats - * @standards: Standards the timing belongs to - * @flags: Flags - * @reserved: Reserved fields, must be zeroed. - * - * A note regarding vertical interlaced timings: height refers to the total - * height of the active video frame (= two fields). The blanking timings refer - * to the blanking of each field. So the height of the total frame is - * calculated as follows: - * - * tot_height = height + vfrontporch + vsync + vbackporch + - * il_vfrontporch + il_vsync + il_vbackporch - * - * The active height of each field is height / 2. - */ -struct v4l2_bt_timings { - __u32 width; - __u32 height; - __u32 interlaced; - __u32 polarities; - __u64 pixelclock; - __u32 hfrontporch; - __u32 hsync; - __u32 hbackporch; - __u32 vfrontporch; - __u32 vsync; - __u32 vbackporch; - __u32 il_vfrontporch; - __u32 il_vsync; - __u32 il_vbackporch; - __u32 standards; - __u32 flags; - __u32 reserved[14]; -} __attribute__ ((packed)); - -/* Interlaced or progressive format */ -#define V4L2_DV_PROGRESSIVE 0 -#define V4L2_DV_INTERLACED 1 - -/* Polarities. If bit is not set, it is assumed to be negative polarity */ -#define V4L2_DV_VSYNC_POS_POL 0x00000001 -#define V4L2_DV_HSYNC_POS_POL 0x00000002 - -/* Timings standards */ -#define V4L2_DV_BT_STD_CEA861 (1 << 0) /* CEA-861 Digital TV Profile */ -#define V4L2_DV_BT_STD_DMT (1 << 1) /* VESA Discrete Monitor Timings */ -#define V4L2_DV_BT_STD_CVT (1 << 2) /* VESA Coordinated Video Timings */ -#define V4L2_DV_BT_STD_GTF (1 << 3) /* VESA Generalized Timings Formula */ - -/* Flags */ - -/* CVT/GTF specific: timing uses reduced blanking (CVT) or the 'Secondary - GTF' curve (GTF). In both cases the horizontal and/or vertical blanking - intervals are reduced, allowing a higher resolution over the same - bandwidth. This is a read-only flag. */ -#define V4L2_DV_FL_REDUCED_BLANKING (1 << 0) -/* CEA-861 specific: set for CEA-861 formats with a framerate of a multiple - of six. These formats can be optionally played at 1 / 1.001 speed. - This is a read-only flag. */ -#define V4L2_DV_FL_CAN_REDUCE_FPS (1 << 1) -/* CEA-861 specific: only valid for video transmitters, the flag is cleared - by receivers. - If the framerate of the format is a multiple of six, then the pixelclock - used to set up the transmitter is divided by 1.001 to make it compatible - with 60 Hz based standards such as NTSC and PAL-M that use a framerate of - 29.97 Hz. Otherwise this flag is cleared. If the transmitter can't generate - such frequencies, then the flag will also be cleared. */ -#define V4L2_DV_FL_REDUCED_FPS (1 << 2) -/* Specific to interlaced formats: if set, then field 1 is really one half-line - longer and field 2 is really one half-line shorter, so each field has - exactly the same number of half-lines. Whether half-lines can be detected - or used depends on the hardware. */ -#define V4L2_DV_FL_HALF_LINE (1 << 0) - - -/** struct v4l2_dv_timings - DV timings - * @type: the type of the timings - * @bt: BT656/1120 timings - */ -struct v4l2_dv_timings { - __u32 type; - union { - struct v4l2_bt_timings bt; - __u32 reserved[32]; - }; -} __attribute__ ((packed)); - -/* Values for the type field */ -#define V4L2_DV_BT_656_1120 0 /* BT.656/1120 timing type */ - - -/** struct v4l2_enum_dv_timings - DV timings enumeration - * @index: enumeration index - * @reserved: must be zeroed - * @timings: the timings for the given index - */ -struct v4l2_enum_dv_timings { - __u32 index; - __u32 reserved[3]; - struct v4l2_dv_timings timings; -}; - -/** struct v4l2_bt_timings_cap - BT.656/BT.1120 timing capabilities - * @min_width: width in pixels - * @max_width: width in pixels - * @min_height: height in lines - * @max_height: height in lines - * @min_pixelclock: Pixel clock in HZ. Ex. 74.25MHz->74250000 - * @max_pixelclock: Pixel clock in HZ. Ex. 74.25MHz->74250000 - * @standards: Supported standards - * @capabilities: Supported capabilities - * @reserved: Must be zeroed - */ -struct v4l2_bt_timings_cap { - __u32 min_width; - __u32 max_width; - __u32 min_height; - __u32 max_height; - __u64 min_pixelclock; - __u64 max_pixelclock; - __u32 standards; - __u32 capabilities; - __u32 reserved[16]; -} __attribute__ ((packed)); - -/* Supports interlaced formats */ -#define V4L2_DV_BT_CAP_INTERLACED (1 << 0) -/* Supports progressive formats */ -#define V4L2_DV_BT_CAP_PROGRESSIVE (1 << 1) -/* Supports CVT/GTF reduced blanking */ -#define V4L2_DV_BT_CAP_REDUCED_BLANKING (1 << 2) -/* Supports custom formats */ -#define V4L2_DV_BT_CAP_CUSTOM (1 << 3) - -/** struct v4l2_dv_timings_cap - DV timings capabilities - * @type: the type of the timings (same as in struct v4l2_dv_timings) - * @bt: the BT656/1120 timings capabilities - */ -struct v4l2_dv_timings_cap { - __u32 type; - __u32 reserved[3]; - union { - struct v4l2_bt_timings_cap bt; - __u32 raw_data[32]; - }; -}; - - -/* - * V I D E O I N P U T S - */ -struct v4l2_input { - __u32 index; /* Which input */ - __u8 name[32]; /* Label */ - __u32 type; /* Type of input */ - __u32 audioset; /* Associated audios (bitfield) */ - __u32 tuner; /* enum v4l2_tuner_type */ - v4l2_std_id std; - __u32 status; - __u32 capabilities; - __u32 reserved[3]; -}; - -/* Values for the 'type' field */ -#define V4L2_INPUT_TYPE_TUNER 1 -#define V4L2_INPUT_TYPE_CAMERA 2 - -/* field 'status' - general */ -#define V4L2_IN_ST_NO_POWER 0x00000001 /* Attached device is off */ -#define V4L2_IN_ST_NO_SIGNAL 0x00000002 -#define V4L2_IN_ST_NO_COLOR 0x00000004 - -/* field 'status' - sensor orientation */ -/* If sensor is mounted upside down set both bits */ -#define V4L2_IN_ST_HFLIP 0x00000010 /* Frames are flipped horizontally */ -#define V4L2_IN_ST_VFLIP 0x00000020 /* Frames are flipped vertically */ - -/* field 'status' - analog */ -#define V4L2_IN_ST_NO_H_LOCK 0x00000100 /* No horizontal sync lock */ -#define V4L2_IN_ST_COLOR_KILL 0x00000200 /* Color killer is active */ - -/* field 'status' - digital */ -#define V4L2_IN_ST_NO_SYNC 0x00010000 /* No synchronization lock */ -#define V4L2_IN_ST_NO_EQU 0x00020000 /* No equalizer lock */ -#define V4L2_IN_ST_NO_CARRIER 0x00040000 /* Carrier recovery failed */ - -/* field 'status' - VCR and set-top box */ -#define V4L2_IN_ST_MACROVISION 0x01000000 /* Macrovision detected */ -#define V4L2_IN_ST_NO_ACCESS 0x02000000 /* Conditional access denied */ -#define V4L2_IN_ST_VTR 0x04000000 /* VTR time constant */ - -/* capabilities flags */ -#define V4L2_IN_CAP_PRESETS 0x00000001 /* Supports S_DV_PRESET */ -#define V4L2_IN_CAP_DV_TIMINGS 0x00000002 /* Supports S_DV_TIMINGS */ -#define V4L2_IN_CAP_CUSTOM_TIMINGS V4L2_IN_CAP_DV_TIMINGS /* For compatibility */ -#define V4L2_IN_CAP_STD 0x00000004 /* Supports S_STD */ - -/* - * V I D E O O U T P U T S - */ -struct v4l2_output { - __u32 index; /* Which output */ - __u8 name[32]; /* Label */ - __u32 type; /* Type of output */ - __u32 audioset; /* Associated audios (bitfield) */ - __u32 modulator; /* Associated modulator */ - v4l2_std_id std; - __u32 capabilities; - __u32 reserved[3]; -}; -/* Values for the 'type' field */ -#define V4L2_OUTPUT_TYPE_MODULATOR 1 -#define V4L2_OUTPUT_TYPE_ANALOG 2 -#define V4L2_OUTPUT_TYPE_ANALOGVGAOVERLAY 3 - -/* capabilities flags */ -#define V4L2_OUT_CAP_PRESETS 0x00000001 /* Supports S_DV_PRESET */ -#define V4L2_OUT_CAP_DV_TIMINGS 0x00000002 /* Supports S_DV_TIMINGS */ -#define V4L2_OUT_CAP_CUSTOM_TIMINGS V4L2_OUT_CAP_DV_TIMINGS /* For compatibility */ -#define V4L2_OUT_CAP_STD 0x00000004 /* Supports S_STD */ - -/* - * C O N T R O L S - */ -struct v4l2_control { - __u32 id; - __s32 value; -}; - -struct v4l2_ext_control { - __u32 id; - __u32 size; - __u32 reserved2[1]; - union { - __s32 value; - __s64 value64; - char *string; - }; -} __attribute__ ((packed)); - -struct v4l2_ext_controls { - __u32 ctrl_class; - __u32 count; - __u32 error_idx; - __u32 reserved[2]; - struct v4l2_ext_control *controls; -}; - -#define V4L2_CTRL_ID_MASK (0x0fffffff) -#define V4L2_CTRL_ID2CLASS(id) ((id) & 0x0fff0000UL) -#define V4L2_CTRL_DRIVER_PRIV(id) (((id) & 0xffff) >= 0x1000) - -enum v4l2_ctrl_type { - V4L2_CTRL_TYPE_INTEGER = 1, - V4L2_CTRL_TYPE_BOOLEAN = 2, - V4L2_CTRL_TYPE_MENU = 3, - V4L2_CTRL_TYPE_BUTTON = 4, - V4L2_CTRL_TYPE_INTEGER64 = 5, - V4L2_CTRL_TYPE_CTRL_CLASS = 6, - V4L2_CTRL_TYPE_STRING = 7, - V4L2_CTRL_TYPE_BITMASK = 8, - V4L2_CTRL_TYPE_INTEGER_MENU = 9, -}; - -/* Used in the VIDIOC_QUERYCTRL ioctl for querying controls */ -struct v4l2_queryctrl { - __u32 id; - __u32 type; /* enum v4l2_ctrl_type */ - __u8 name[32]; /* Whatever */ - __s32 minimum; /* Note signedness */ - __s32 maximum; - __s32 step; - __s32 default_value; - __u32 flags; - __u32 reserved[2]; -}; - -/* Used in the VIDIOC_QUERYMENU ioctl for querying menu items */ -struct v4l2_querymenu { - __u32 id; - __u32 index; - union { - __u8 name[32]; /* Whatever */ - __s64 value; - }; - __u32 reserved; -} __attribute__ ((packed)); - -/* Control flags */ -#define V4L2_CTRL_FLAG_DISABLED 0x0001 -#define V4L2_CTRL_FLAG_GRABBED 0x0002 -#define V4L2_CTRL_FLAG_READ_ONLY 0x0004 -#define V4L2_CTRL_FLAG_UPDATE 0x0008 -#define V4L2_CTRL_FLAG_INACTIVE 0x0010 -#define V4L2_CTRL_FLAG_SLIDER 0x0020 -#define V4L2_CTRL_FLAG_WRITE_ONLY 0x0040 -#define V4L2_CTRL_FLAG_VOLATILE 0x0080 - -/* Query flag, to be ORed with the control ID */ -#define V4L2_CTRL_FLAG_NEXT_CTRL 0x80000000 - -/* User-class control IDs defined by V4L2 */ -#define V4L2_CID_MAX_CTRLS 1024 -/* IDs reserved for driver specific controls */ -#define V4L2_CID_PRIVATE_BASE 0x08000000 - - -/* DV-class control IDs defined by V4L2 */ -#define V4L2_CID_DV_CLASS_BASE (V4L2_CTRL_CLASS_DV | 0x900) -#define V4L2_CID_DV_CLASS (V4L2_CTRL_CLASS_DV | 1) - -#define V4L2_CID_DV_TX_HOTPLUG (V4L2_CID_DV_CLASS_BASE + 1) -#define V4L2_CID_DV_TX_RXSENSE (V4L2_CID_DV_CLASS_BASE + 2) -#define V4L2_CID_DV_TX_EDID_PRESENT (V4L2_CID_DV_CLASS_BASE + 3) -#define V4L2_CID_DV_TX_MODE (V4L2_CID_DV_CLASS_BASE + 4) -enum v4l2_dv_tx_mode { - V4L2_DV_TX_MODE_DVI_D = 0, - V4L2_DV_TX_MODE_HDMI = 1, -}; -#define V4L2_CID_DV_TX_RGB_RANGE (V4L2_CID_DV_CLASS_BASE + 5) -enum v4l2_dv_rgb_range { - V4L2_DV_RGB_RANGE_AUTO = 0, - V4L2_DV_RGB_RANGE_LIMITED = 1, - V4L2_DV_RGB_RANGE_FULL = 2, -}; - -#define V4L2_CID_DV_RX_POWER_PRESENT (V4L2_CID_DV_CLASS_BASE + 100) -#define V4L2_CID_DV_RX_RGB_RANGE (V4L2_CID_DV_CLASS_BASE + 101) - -/* - * T U N I N G - */ -struct v4l2_tuner { - __u32 index; - __u8 name[32]; - __u32 type; /* enum v4l2_tuner_type */ - __u32 capability; - __u32 rangelow; - __u32 rangehigh; - __u32 rxsubchans; - __u32 audmode; - __s32 signal; - __s32 afc; - __u32 reserved[4]; -}; - -struct v4l2_modulator { - __u32 index; - __u8 name[32]; - __u32 capability; - __u32 rangelow; - __u32 rangehigh; - __u32 txsubchans; - __u32 reserved[4]; -}; - -/* Flags for the 'capability' field */ -#define V4L2_TUNER_CAP_LOW 0x0001 -#define V4L2_TUNER_CAP_NORM 0x0002 -#define V4L2_TUNER_CAP_HWSEEK_BOUNDED 0x0004 -#define V4L2_TUNER_CAP_HWSEEK_WRAP 0x0008 -#define V4L2_TUNER_CAP_STEREO 0x0010 -#define V4L2_TUNER_CAP_LANG2 0x0020 -#define V4L2_TUNER_CAP_SAP 0x0020 -#define V4L2_TUNER_CAP_LANG1 0x0040 -#define V4L2_TUNER_CAP_RDS 0x0080 -#define V4L2_TUNER_CAP_RDS_BLOCK_IO 0x0100 -#define V4L2_TUNER_CAP_RDS_CONTROLS 0x0200 -#define V4L2_TUNER_CAP_FREQ_BANDS 0x0400 -#define V4L2_TUNER_CAP_HWSEEK_PROG_LIM 0x0800 - -/* Flags for the 'rxsubchans' field */ -#define V4L2_TUNER_SUB_MONO 0x0001 -#define V4L2_TUNER_SUB_STEREO 0x0002 -#define V4L2_TUNER_SUB_LANG2 0x0004 -#define V4L2_TUNER_SUB_SAP 0x0004 -#define V4L2_TUNER_SUB_LANG1 0x0008 -#define V4L2_TUNER_SUB_RDS 0x0010 - -/* Values for the 'audmode' field */ -#define V4L2_TUNER_MODE_MONO 0x0000 -#define V4L2_TUNER_MODE_STEREO 0x0001 -#define V4L2_TUNER_MODE_LANG2 0x0002 -#define V4L2_TUNER_MODE_SAP 0x0002 -#define V4L2_TUNER_MODE_LANG1 0x0003 -#define V4L2_TUNER_MODE_LANG1_LANG2 0x0004 - -struct v4l2_frequency { - __u32 tuner; - __u32 type; /* enum v4l2_tuner_type */ - __u32 frequency; - __u32 reserved[8]; -}; - -#define V4L2_BAND_MODULATION_VSB (1 << 1) -#define V4L2_BAND_MODULATION_FM (1 << 2) -#define V4L2_BAND_MODULATION_AM (1 << 3) - -struct v4l2_frequency_band { - __u32 tuner; - __u32 type; /* enum v4l2_tuner_type */ - __u32 index; - __u32 capability; - __u32 rangelow; - __u32 rangehigh; - __u32 modulation; - __u32 reserved[9]; -}; - -struct v4l2_hw_freq_seek { - __u32 tuner; - __u32 type; /* enum v4l2_tuner_type */ - __u32 seek_upward; - __u32 wrap_around; - __u32 spacing; - __u32 rangelow; - __u32 rangehigh; - __u32 reserved[5]; -}; - -/* - * R D S - */ - -struct v4l2_rds_data { - __u8 lsb; - __u8 msb; - __u8 block; -} __attribute__ ((packed)); - -#define V4L2_RDS_BLOCK_MSK 0x7 -#define V4L2_RDS_BLOCK_A 0 -#define V4L2_RDS_BLOCK_B 1 -#define V4L2_RDS_BLOCK_C 2 -#define V4L2_RDS_BLOCK_D 3 -#define V4L2_RDS_BLOCK_C_ALT 4 -#define V4L2_RDS_BLOCK_INVALID 7 - -#define V4L2_RDS_BLOCK_CORRECTED 0x40 -#define V4L2_RDS_BLOCK_ERROR 0x80 - -/* - * A U D I O - */ -struct v4l2_audio { - __u32 index; - __u8 name[32]; - __u32 capability; - __u32 mode; - __u32 reserved[2]; -}; - -/* Flags for the 'capability' field */ -#define V4L2_AUDCAP_STEREO 0x00001 -#define V4L2_AUDCAP_AVL 0x00002 - -/* Flags for the 'mode' field */ -#define V4L2_AUDMODE_AVL 0x00001 - -struct v4l2_audioout { - __u32 index; - __u8 name[32]; - __u32 capability; - __u32 mode; - __u32 reserved[2]; -}; - -/* - * M P E G S E R V I C E S - * - * NOTE: EXPERIMENTAL API - */ -#if 1 -#define V4L2_ENC_IDX_FRAME_I (0) -#define V4L2_ENC_IDX_FRAME_P (1) -#define V4L2_ENC_IDX_FRAME_B (2) -#define V4L2_ENC_IDX_FRAME_MASK (0xf) - -struct v4l2_enc_idx_entry { - __u64 offset; - __u64 pts; - __u32 length; - __u32 flags; - __u32 reserved[2]; -}; - -#define V4L2_ENC_IDX_ENTRIES (64) -struct v4l2_enc_idx { - __u32 entries; - __u32 entries_cap; - __u32 reserved[4]; - struct v4l2_enc_idx_entry entry[V4L2_ENC_IDX_ENTRIES]; -}; - - -#define V4L2_ENC_CMD_START (0) -#define V4L2_ENC_CMD_STOP (1) -#define V4L2_ENC_CMD_PAUSE (2) -#define V4L2_ENC_CMD_RESUME (3) - -/* Flags for V4L2_ENC_CMD_STOP */ -#define V4L2_ENC_CMD_STOP_AT_GOP_END (1 << 0) - -struct v4l2_encoder_cmd { - __u32 cmd; - __u32 flags; - union { - struct { - __u32 data[8]; - } raw; - }; -}; - -/* Decoder commands */ -#define V4L2_DEC_CMD_START (0) -#define V4L2_DEC_CMD_STOP (1) -#define V4L2_DEC_CMD_PAUSE (2) -#define V4L2_DEC_CMD_RESUME (3) - -/* Flags for V4L2_DEC_CMD_START */ -#define V4L2_DEC_CMD_START_MUTE_AUDIO (1 << 0) - -/* Flags for V4L2_DEC_CMD_PAUSE */ -#define V4L2_DEC_CMD_PAUSE_TO_BLACK (1 << 0) - -/* Flags for V4L2_DEC_CMD_STOP */ -#define V4L2_DEC_CMD_STOP_TO_BLACK (1 << 0) -#define V4L2_DEC_CMD_STOP_IMMEDIATELY (1 << 1) - -/* Play format requirements (returned by the driver): */ - -/* The decoder has no special format requirements */ -#define V4L2_DEC_START_FMT_NONE (0) -/* The decoder requires full GOPs */ -#define V4L2_DEC_START_FMT_GOP (1) - -/* The structure must be zeroed before use by the application - This ensures it can be extended safely in the future. */ -struct v4l2_decoder_cmd { - __u32 cmd; - __u32 flags; - union { - struct { - __u64 pts; - } stop; - - struct { - /* 0 or 1000 specifies normal speed, - 1 specifies forward single stepping, - -1 specifies backward single stepping, - >1: playback at speed/1000 of the normal speed, - <-1: reverse playback at (-speed/1000) of the normal speed. */ - __s32 speed; - __u32 format; - } start; - - struct { - __u32 data[16]; - } raw; - }; -}; -#endif - - -/* - * D A T A S E R V I C E S ( V B I ) - * - * Data services API by Michael Schimek - */ - -/* Raw VBI */ -struct v4l2_vbi_format { - __u32 sampling_rate; /* in 1 Hz */ - __u32 offset; - __u32 samples_per_line; - __u32 sample_format; /* V4L2_PIX_FMT_* */ - __s32 start[2]; - __u32 count[2]; - __u32 flags; /* V4L2_VBI_* */ - __u32 reserved[2]; /* must be zero */ -}; - -/* VBI flags */ -#define V4L2_VBI_UNSYNC (1 << 0) -#define V4L2_VBI_INTERLACED (1 << 1) - -/* Sliced VBI - * - * This implements is a proposal V4L2 API to allow SLICED VBI - * required for some hardware encoders. It should change without - * notice in the definitive implementation. - */ - -struct v4l2_sliced_vbi_format { - __u16 service_set; - /* service_lines[0][...] specifies lines 0-23 (1-23 used) of the first field - service_lines[1][...] specifies lines 0-23 (1-23 used) of the second field - (equals frame lines 313-336 for 625 line video - standards, 263-286 for 525 line standards) */ - __u16 service_lines[2][24]; - __u32 io_size; - __u32 reserved[2]; /* must be zero */ -}; - -/* Teletext World System Teletext - (WST), defined on ITU-R BT.653-2 */ -#define V4L2_SLICED_TELETEXT_B (0x0001) -/* Video Program System, defined on ETS 300 231*/ -#define V4L2_SLICED_VPS (0x0400) -/* Closed Caption, defined on EIA-608 */ -#define V4L2_SLICED_CAPTION_525 (0x1000) -/* Wide Screen System, defined on ITU-R BT1119.1 */ -#define V4L2_SLICED_WSS_625 (0x4000) - -#define V4L2_SLICED_VBI_525 (V4L2_SLICED_CAPTION_525) -#define V4L2_SLICED_VBI_625 (V4L2_SLICED_TELETEXT_B | V4L2_SLICED_VPS | V4L2_SLICED_WSS_625) - -struct v4l2_sliced_vbi_cap { - __u16 service_set; - /* service_lines[0][...] specifies lines 0-23 (1-23 used) of the first field - service_lines[1][...] specifies lines 0-23 (1-23 used) of the second field - (equals frame lines 313-336 for 625 line video - standards, 263-286 for 525 line standards) */ - __u16 service_lines[2][24]; - __u32 type; /* enum v4l2_buf_type */ - __u32 reserved[3]; /* must be 0 */ -}; - -struct v4l2_sliced_vbi_data { - __u32 id; - __u32 field; /* 0: first field, 1: second field */ - __u32 line; /* 1-23 */ - __u32 reserved; /* must be 0 */ - __u8 data[48]; -}; - -/* - * Sliced VBI data inserted into MPEG Streams - */ - -/* - * V4L2_MPEG_STREAM_VBI_FMT_IVTV: - * - * Structure of payload contained in an MPEG 2 Private Stream 1 PES Packet in an - * MPEG-2 Program Pack that contains V4L2_MPEG_STREAM_VBI_FMT_IVTV Sliced VBI - * data - * - * Note, the MPEG-2 Program Pack and Private Stream 1 PES packet header - * definitions are not included here. See the MPEG-2 specifications for details - * on these headers. - */ - -/* Line type IDs */ -#define V4L2_MPEG_VBI_IVTV_TELETEXT_B (1) -#define V4L2_MPEG_VBI_IVTV_CAPTION_525 (4) -#define V4L2_MPEG_VBI_IVTV_WSS_625 (5) -#define V4L2_MPEG_VBI_IVTV_VPS (7) - -struct v4l2_mpeg_vbi_itv0_line { - __u8 id; /* One of V4L2_MPEG_VBI_IVTV_* above */ - __u8 data[42]; /* Sliced VBI data for the line */ -} __attribute__ ((packed)); - -struct v4l2_mpeg_vbi_itv0 { - __le32 linemask[2]; /* Bitmasks of VBI service lines present */ - struct v4l2_mpeg_vbi_itv0_line line[35]; -} __attribute__ ((packed)); - -struct v4l2_mpeg_vbi_ITV0 { - struct v4l2_mpeg_vbi_itv0_line line[36]; -} __attribute__ ((packed)); - -#define V4L2_MPEG_VBI_IVTV_MAGIC0 "itv0" -#define V4L2_MPEG_VBI_IVTV_MAGIC1 "ITV0" - -struct v4l2_mpeg_vbi_fmt_ivtv { - __u8 magic[4]; - union { - struct v4l2_mpeg_vbi_itv0 itv0; - struct v4l2_mpeg_vbi_ITV0 ITV0; - }; -} __attribute__ ((packed)); - -/* - * A G G R E G A T E S T R U C T U R E S - */ - -/** - * struct v4l2_plane_pix_format - additional, per-plane format definition - * @sizeimage: maximum size in bytes required for data, for which - * this plane will be used - * @bytesperline: distance in bytes between the leftmost pixels in two - * adjacent lines - */ -struct v4l2_plane_pix_format { - __u32 sizeimage; - __u16 bytesperline; - __u16 reserved[7]; -} __attribute__ ((packed)); - -/** - * struct v4l2_pix_format_mplane - multiplanar format definition - * @width: image width in pixels - * @height: image height in pixels - * @pixelformat: little endian four character code (fourcc) - * @field: enum v4l2_field; field order (for interlaced video) - * @colorspace: enum v4l2_colorspace; supplemental to pixelformat - * @plane_fmt: per-plane information - * @num_planes: number of planes for this format - */ -struct v4l2_pix_format_mplane { - __u32 width; - __u32 height; - __u32 pixelformat; - __u32 field; - __u32 colorspace; - - struct v4l2_plane_pix_format plane_fmt[VIDEO_MAX_PLANES]; - __u8 num_planes; - __u8 reserved[11]; -} __attribute__ ((packed)); - -/** - * struct v4l2_format - stream data format - * @type: enum v4l2_buf_type; type of the data stream - * @pix: definition of an image format - * @pix_mp: definition of a multiplanar image format - * @win: definition of an overlaid image - * @vbi: raw VBI capture or output parameters - * @sliced: sliced VBI capture or output parameters - * @raw_data: placeholder for future extensions and custom formats - */ -struct v4l2_format { - __u32 type; - union { - struct v4l2_pix_format pix; /* V4L2_BUF_TYPE_VIDEO_CAPTURE */ - struct v4l2_pix_format_mplane pix_mp; /* V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE */ - struct v4l2_window win; /* V4L2_BUF_TYPE_VIDEO_OVERLAY */ - struct v4l2_vbi_format vbi; /* V4L2_BUF_TYPE_VBI_CAPTURE */ - struct v4l2_sliced_vbi_format sliced; /* V4L2_BUF_TYPE_SLICED_VBI_CAPTURE */ - __u8 raw_data[200]; /* user-defined */ - } fmt; -}; - -/* Stream type-dependent parameters - */ -struct v4l2_streamparm { - __u32 type; /* enum v4l2_buf_type */ - union { - struct v4l2_captureparm capture; - struct v4l2_outputparm output; - __u8 raw_data[200]; /* user-defined */ - } parm; -}; - -/* - * E V E N T S - */ - -#define V4L2_EVENT_ALL 0 -#define V4L2_EVENT_VSYNC 1 -#define V4L2_EVENT_EOS 2 -#define V4L2_EVENT_CTRL 3 -#define V4L2_EVENT_FRAME_SYNC 4 -#define V4L2_EVENT_PRIVATE_START 0x08000000 - -/* Payload for V4L2_EVENT_VSYNC */ -struct v4l2_event_vsync { - /* Can be V4L2_FIELD_ANY, _NONE, _TOP or _BOTTOM */ - __u8 field; -} __attribute__ ((packed)); - -/* Payload for V4L2_EVENT_CTRL */ -#define V4L2_EVENT_CTRL_CH_VALUE (1 << 0) -#define V4L2_EVENT_CTRL_CH_FLAGS (1 << 1) - -struct v4l2_event_ctrl { - __u32 changes; - __u32 type; - union { - __s32 value; - __s64 value64; - }; - __u32 flags; - __s32 minimum; - __s32 maximum; - __s32 step; - __s32 default_value; -}; - -struct v4l2_event_frame_sync { - __u32 frame_sequence; -}; - -struct v4l2_event { - __u32 type; - union { - struct v4l2_event_vsync vsync; - struct v4l2_event_ctrl ctrl; - struct v4l2_event_frame_sync frame_sync; - __u8 data[64]; - } u; - __u32 pending; - __u32 sequence; - struct timespec timestamp; - __u32 id; - __u32 reserved[8]; -}; - -#define V4L2_EVENT_SUB_FL_SEND_INITIAL (1 << 0) -#define V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK (1 << 1) - -struct v4l2_event_subscription { - __u32 type; - __u32 id; - __u32 flags; - __u32 reserved[5]; -}; - -/* - * A D V A N C E D D E B U G G I N G - * - * NOTE: EXPERIMENTAL API, NEVER RELY ON THIS IN APPLICATIONS! - * FOR DEBUGGING, TESTING AND INTERNAL USE ONLY! - */ - -/* VIDIOC_DBG_G_REGISTER and VIDIOC_DBG_S_REGISTER */ - -#define V4L2_CHIP_MATCH_HOST 0 /* Match against chip ID on host (0 for the host) */ -#define V4L2_CHIP_MATCH_I2C_DRIVER 1 /* Match against I2C driver name */ -#define V4L2_CHIP_MATCH_I2C_ADDR 2 /* Match against I2C 7-bit address */ -#define V4L2_CHIP_MATCH_AC97 3 /* Match against anciliary AC97 chip */ - -struct v4l2_dbg_match { - __u32 type; /* Match type */ - union { /* Match this chip, meaning determined by type */ - __u32 addr; - char name[32]; - }; -} __attribute__ ((packed)); - -struct v4l2_dbg_register { - struct v4l2_dbg_match match; - __u32 size; /* register size in bytes */ - __u64 reg; - __u64 val; -} __attribute__ ((packed)); - -/* VIDIOC_DBG_G_CHIP_IDENT */ -struct v4l2_dbg_chip_ident { - struct v4l2_dbg_match match; - __u32 ident; /* chip identifier as specified in <media/v4l2-chip-ident.h> */ - __u32 revision; /* chip revision, chip specific */ -} __attribute__ ((packed)); - -/** - * struct v4l2_create_buffers - VIDIOC_CREATE_BUFS argument - * @index: on return, index of the first created buffer - * @count: entry: number of requested buffers, - * return: number of created buffers - * @memory: enum v4l2_memory; buffer memory type - * @format: frame format, for which buffers are requested - * @reserved: future extensions - */ -struct v4l2_create_buffers { - __u32 index; - __u32 count; - __u32 memory; - struct v4l2_format format; - __u32 reserved[8]; -}; - -/* - * I O C T L C O D E S F O R V I D E O D E V I C E S - * - */ -#define VIDIOC_QUERYCAP _IOR('V', 0, struct v4l2_capability) -#define VIDIOC_RESERVED _IO('V', 1) -#define VIDIOC_ENUM_FMT _IOWR('V', 2, struct v4l2_fmtdesc) -#define VIDIOC_G_FMT _IOWR('V', 4, struct v4l2_format) -#define VIDIOC_S_FMT _IOWR('V', 5, struct v4l2_format) -#define VIDIOC_REQBUFS _IOWR('V', 8, struct v4l2_requestbuffers) -#define VIDIOC_QUERYBUF _IOWR('V', 9, struct v4l2_buffer) -#define VIDIOC_G_FBUF _IOR('V', 10, struct v4l2_framebuffer) -#define VIDIOC_S_FBUF _IOW('V', 11, struct v4l2_framebuffer) -#define VIDIOC_OVERLAY _IOW('V', 14, int) -#define VIDIOC_QBUF _IOWR('V', 15, struct v4l2_buffer) -#define VIDIOC_DQBUF _IOWR('V', 17, struct v4l2_buffer) -#define VIDIOC_STREAMON _IOW('V', 18, int) -#define VIDIOC_STREAMOFF _IOW('V', 19, int) -#define VIDIOC_G_PARM _IOWR('V', 21, struct v4l2_streamparm) -#define VIDIOC_S_PARM _IOWR('V', 22, struct v4l2_streamparm) -#define VIDIOC_G_STD _IOR('V', 23, v4l2_std_id) -#define VIDIOC_S_STD _IOW('V', 24, v4l2_std_id) -#define VIDIOC_ENUMSTD _IOWR('V', 25, struct v4l2_standard) -#define VIDIOC_ENUMINPUT _IOWR('V', 26, struct v4l2_input) -#define VIDIOC_G_CTRL _IOWR('V', 27, struct v4l2_control) -#define VIDIOC_S_CTRL _IOWR('V', 28, struct v4l2_control) -#define VIDIOC_G_TUNER _IOWR('V', 29, struct v4l2_tuner) -#define VIDIOC_S_TUNER _IOW('V', 30, struct v4l2_tuner) -#define VIDIOC_G_AUDIO _IOR('V', 33, struct v4l2_audio) -#define VIDIOC_S_AUDIO _IOW('V', 34, struct v4l2_audio) -#define VIDIOC_QUERYCTRL _IOWR('V', 36, struct v4l2_queryctrl) -#define VIDIOC_QUERYMENU _IOWR('V', 37, struct v4l2_querymenu) -#define VIDIOC_G_INPUT _IOR('V', 38, int) -#define VIDIOC_S_INPUT _IOWR('V', 39, int) -#define VIDIOC_G_OUTPUT _IOR('V', 46, int) -#define VIDIOC_S_OUTPUT _IOWR('V', 47, int) -#define VIDIOC_ENUMOUTPUT _IOWR('V', 48, struct v4l2_output) -#define VIDIOC_G_AUDOUT _IOR('V', 49, struct v4l2_audioout) -#define VIDIOC_S_AUDOUT _IOW('V', 50, struct v4l2_audioout) -#define VIDIOC_G_MODULATOR _IOWR('V', 54, struct v4l2_modulator) -#define VIDIOC_S_MODULATOR _IOW('V', 55, struct v4l2_modulator) -#define VIDIOC_G_FREQUENCY _IOWR('V', 56, struct v4l2_frequency) -#define VIDIOC_S_FREQUENCY _IOW('V', 57, struct v4l2_frequency) -#define VIDIOC_CROPCAP _IOWR('V', 58, struct v4l2_cropcap) -#define VIDIOC_G_CROP _IOWR('V', 59, struct v4l2_crop) -#define VIDIOC_S_CROP _IOW('V', 60, struct v4l2_crop) -#define VIDIOC_G_JPEGCOMP _IOR('V', 61, struct v4l2_jpegcompression) -#define VIDIOC_S_JPEGCOMP _IOW('V', 62, struct v4l2_jpegcompression) -#define VIDIOC_QUERYSTD _IOR('V', 63, v4l2_std_id) -#define VIDIOC_TRY_FMT _IOWR('V', 64, struct v4l2_format) -#define VIDIOC_ENUMAUDIO _IOWR('V', 65, struct v4l2_audio) -#define VIDIOC_ENUMAUDOUT _IOWR('V', 66, struct v4l2_audioout) -#define VIDIOC_G_PRIORITY _IOR('V', 67, __u32) /* enum v4l2_priority */ -#define VIDIOC_S_PRIORITY _IOW('V', 68, __u32) /* enum v4l2_priority */ -#define VIDIOC_G_SLICED_VBI_CAP _IOWR('V', 69, struct v4l2_sliced_vbi_cap) -#define VIDIOC_LOG_STATUS _IO('V', 70) -#define VIDIOC_G_EXT_CTRLS _IOWR('V', 71, struct v4l2_ext_controls) -#define VIDIOC_S_EXT_CTRLS _IOWR('V', 72, struct v4l2_ext_controls) -#define VIDIOC_TRY_EXT_CTRLS _IOWR('V', 73, struct v4l2_ext_controls) -#if 1 -#define VIDIOC_ENUM_FRAMESIZES _IOWR('V', 74, struct v4l2_frmsizeenum) -#define VIDIOC_ENUM_FRAMEINTERVALS _IOWR('V', 75, struct v4l2_frmivalenum) -#define VIDIOC_G_ENC_INDEX _IOR('V', 76, struct v4l2_enc_idx) -#define VIDIOC_ENCODER_CMD _IOWR('V', 77, struct v4l2_encoder_cmd) -#define VIDIOC_TRY_ENCODER_CMD _IOWR('V', 78, struct v4l2_encoder_cmd) -#endif - -#if 1 -/* Experimental, meant for debugging, testing and internal use. - Only implemented if CONFIG_VIDEO_ADV_DEBUG is defined. - You must be root to use these ioctls. Never use these in applications! */ -#define VIDIOC_DBG_S_REGISTER _IOW('V', 79, struct v4l2_dbg_register) -#define VIDIOC_DBG_G_REGISTER _IOWR('V', 80, struct v4l2_dbg_register) - -/* Experimental, meant for debugging, testing and internal use. - Never use this ioctl in applications! */ -#define VIDIOC_DBG_G_CHIP_IDENT _IOWR('V', 81, struct v4l2_dbg_chip_ident) -#endif - -#define VIDIOC_S_HW_FREQ_SEEK _IOW('V', 82, struct v4l2_hw_freq_seek) - -/* These four DV Preset ioctls are deprecated in favor of the DV Timings - ioctls. */ -#define VIDIOC_ENUM_DV_PRESETS _IOWR('V', 83, struct v4l2_dv_enum_preset) -#define VIDIOC_S_DV_PRESET _IOWR('V', 84, struct v4l2_dv_preset) -#define VIDIOC_G_DV_PRESET _IOWR('V', 85, struct v4l2_dv_preset) -#define VIDIOC_QUERY_DV_PRESET _IOR('V', 86, struct v4l2_dv_preset) -#define VIDIOC_S_DV_TIMINGS _IOWR('V', 87, struct v4l2_dv_timings) -#define VIDIOC_G_DV_TIMINGS _IOWR('V', 88, struct v4l2_dv_timings) -#define VIDIOC_DQEVENT _IOR('V', 89, struct v4l2_event) -#define VIDIOC_SUBSCRIBE_EVENT _IOW('V', 90, struct v4l2_event_subscription) -#define VIDIOC_UNSUBSCRIBE_EVENT _IOW('V', 91, struct v4l2_event_subscription) - -/* Experimental, the below two ioctls may change over the next couple of kernel - versions */ -#define VIDIOC_CREATE_BUFS _IOWR('V', 92, struct v4l2_create_buffers) -#define VIDIOC_PREPARE_BUF _IOWR('V', 93, struct v4l2_buffer) - -/* Experimental selection API */ -#define VIDIOC_G_SELECTION _IOWR('V', 94, struct v4l2_selection) -#define VIDIOC_S_SELECTION _IOWR('V', 95, struct v4l2_selection) - -/* Experimental, these two ioctls may change over the next couple of kernel - versions. */ -#define VIDIOC_DECODER_CMD _IOWR('V', 96, struct v4l2_decoder_cmd) -#define VIDIOC_TRY_DECODER_CMD _IOWR('V', 97, struct v4l2_decoder_cmd) - -/* Experimental, these three ioctls may change over the next couple of kernel - versions. */ -#define VIDIOC_ENUM_DV_TIMINGS _IOWR('V', 98, struct v4l2_enum_dv_timings) -#define VIDIOC_QUERY_DV_TIMINGS _IOR('V', 99, struct v4l2_dv_timings) -#define VIDIOC_DV_TIMINGS_CAP _IOWR('V', 100, struct v4l2_dv_timings_cap) - -/* Experimental, this ioctl may change over the next couple of kernel - versions. */ -#define VIDIOC_ENUM_FREQ_BANDS _IOWR('V', 101, struct v4l2_frequency_band) - -/* Reminder: when adding new ioctls please add support for them to - drivers/media/video/v4l2-compat-ioctl32.c as well! */ - -#define BASE_VIDIOC_PRIVATE 192 /* 192-255 are private */ +#include <uapi/linux/videodev2.h> #endif /* __LINUX_VIDEODEV2_H */ diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h index e2850a7ea27..29b9104232b 100644 --- a/include/linux/virtio_config.h +++ b/include/linux/virtio_config.h @@ -1,60 +1,10 @@ #ifndef _LINUX_VIRTIO_CONFIG_H #define _LINUX_VIRTIO_CONFIG_H -/* This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so - * anyone can use the definitions to implement compatible drivers/servers. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of IBM nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. */ - -/* Virtio devices use a standardized configuration space to define their - * features and pass configuration information, but each implementation can - * store and access that space differently. */ -#include <linux/types.h> - -/* Status byte for guest to report progress, and synchronize features. */ -/* We have seen device and processed generic fields (VIRTIO_CONFIG_F_VIRTIO) */ -#define VIRTIO_CONFIG_S_ACKNOWLEDGE 1 -/* We have found a driver for the device. */ -#define VIRTIO_CONFIG_S_DRIVER 2 -/* Driver has used its parts of the config, and is happy */ -#define VIRTIO_CONFIG_S_DRIVER_OK 4 -/* We've given up on this device. */ -#define VIRTIO_CONFIG_S_FAILED 0x80 - -/* Some virtio feature bits (currently bits 28 through 31) are reserved for the - * transport being used (eg. virtio_ring), the rest are per-device feature - * bits. */ -#define VIRTIO_TRANSPORT_F_START 28 -#define VIRTIO_TRANSPORT_F_END 32 - -/* Do we get callbacks when the ring is completely used, even if we've - * suppressed them? */ -#define VIRTIO_F_NOTIFY_ON_EMPTY 24 -#ifdef __KERNEL__ #include <linux/err.h> #include <linux/bug.h> #include <linux/virtio.h> +#include <uapi/linux/virtio_config.h> /** * virtio_config_ops - operations for configuring a virtio device @@ -213,5 +163,4 @@ int virtqueue_set_affinity(struct virtqueue *vq, int cpu) } -#endif /* __KERNEL__ */ #endif /* _LINUX_VIRTIO_CONFIG_H */ diff --git a/include/linux/virtio_console.h b/include/linux/virtio_console.h index bdf4b003473..d2e2785af60 100644 --- a/include/linux/virtio_console.h +++ b/include/linux/virtio_console.h @@ -1,8 +1,3 @@ -#ifndef _LINUX_VIRTIO_CONSOLE_H -#define _LINUX_VIRTIO_CONSOLE_H -#include <linux/types.h> -#include <linux/virtio_ids.h> -#include <linux/virtio_config.h> /* * This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so * anyone can use the definitions to implement compatible drivers/servers: @@ -34,44 +29,10 @@ * Copyright (C) Red Hat, Inc., 2009, 2010, 2011 * Copyright (C) Amit Shah <amit.shah@redhat.com>, 2009, 2010, 2011 */ +#ifndef _LINUX_VIRTIO_CONSOLE_H +#define _LINUX_VIRTIO_CONSOLE_H -/* Feature bits */ -#define VIRTIO_CONSOLE_F_SIZE 0 /* Does host provide console size? */ -#define VIRTIO_CONSOLE_F_MULTIPORT 1 /* Does host provide multiple ports? */ - -#define VIRTIO_CONSOLE_BAD_ID (~(u32)0) - -struct virtio_console_config { - /* colums of the screens */ - __u16 cols; - /* rows of the screens */ - __u16 rows; - /* max. number of ports this device can hold */ - __u32 max_nr_ports; -} __attribute__((packed)); - -/* - * A message that's passed between the Host and the Guest for a - * particular port. - */ -struct virtio_console_control { - __u32 id; /* Port number */ - __u16 event; /* The kind of control event (see below) */ - __u16 value; /* Extra information for the key */ -}; - -/* Some events for control messages */ -#define VIRTIO_CONSOLE_DEVICE_READY 0 -#define VIRTIO_CONSOLE_PORT_ADD 1 -#define VIRTIO_CONSOLE_PORT_REMOVE 2 -#define VIRTIO_CONSOLE_PORT_READY 3 -#define VIRTIO_CONSOLE_CONSOLE_PORT 4 -#define VIRTIO_CONSOLE_RESIZE 5 -#define VIRTIO_CONSOLE_PORT_OPEN 6 -#define VIRTIO_CONSOLE_PORT_NAME 7 +#include <uapi/linux/virtio_console.h> -#ifdef __KERNEL__ int __init virtio_cons_early_init(int (*put_chars)(u32, const char *, int)); -#endif /* __KERNEL__ */ - #endif /* _LINUX_VIRTIO_CONSOLE_H */ diff --git a/include/linux/virtio_ring.h b/include/linux/virtio_ring.h index c2d793a06ad..63c6ea19951 100644 --- a/include/linux/virtio_ring.h +++ b/include/linux/virtio_ring.h @@ -1,167 +1,9 @@ #ifndef _LINUX_VIRTIO_RING_H #define _LINUX_VIRTIO_RING_H -/* An interface for efficient virtio implementation, currently for use by KVM - * and lguest, but hopefully others soon. Do NOT change this since it will - * break existing servers and clients. - * - * This header is BSD licensed so anyone can use the definitions to implement - * compatible drivers/servers. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of IBM nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * Copyright Rusty Russell IBM Corporation 2007. */ -#include <linux/types.h> -/* This marks a buffer as continuing via the next field. */ -#define VRING_DESC_F_NEXT 1 -/* This marks a buffer as write-only (otherwise read-only). */ -#define VRING_DESC_F_WRITE 2 -/* This means the buffer contains a list of buffer descriptors. */ -#define VRING_DESC_F_INDIRECT 4 - -/* The Host uses this in used->flags to advise the Guest: don't kick me when - * you add a buffer. It's unreliable, so it's simply an optimization. Guest - * will still kick if it's out of buffers. */ -#define VRING_USED_F_NO_NOTIFY 1 -/* The Guest uses this in avail->flags to advise the Host: don't interrupt me - * when you consume a buffer. It's unreliable, so it's simply an - * optimization. */ -#define VRING_AVAIL_F_NO_INTERRUPT 1 - -/* We support indirect buffer descriptors */ -#define VIRTIO_RING_F_INDIRECT_DESC 28 - -/* The Guest publishes the used index for which it expects an interrupt - * at the end of the avail ring. Host should ignore the avail->flags field. */ -/* The Host publishes the avail index for which it expects a kick - * at the end of the used ring. Guest should ignore the used->flags field. */ -#define VIRTIO_RING_F_EVENT_IDX 29 - -/* Virtio ring descriptors: 16 bytes. These can chain together via "next". */ -struct vring_desc { - /* Address (guest-physical). */ - __u64 addr; - /* Length. */ - __u32 len; - /* The flags as indicated above. */ - __u16 flags; - /* We chain unused descriptors via this, too */ - __u16 next; -}; - -struct vring_avail { - __u16 flags; - __u16 idx; - __u16 ring[]; -}; - -/* u32 is used here for ids for padding reasons. */ -struct vring_used_elem { - /* Index of start of used descriptor chain. */ - __u32 id; - /* Total length of the descriptor chain which was used (written to) */ - __u32 len; -}; - -struct vring_used { - __u16 flags; - __u16 idx; - struct vring_used_elem ring[]; -}; - -struct vring { - unsigned int num; - - struct vring_desc *desc; - - struct vring_avail *avail; - - struct vring_used *used; -}; - -/* The standard layout for the ring is a continuous chunk of memory which looks - * like this. We assume num is a power of 2. - * - * struct vring - * { - * // The actual descriptors (16 bytes each) - * struct vring_desc desc[num]; - * - * // A ring of available descriptor heads with free-running index. - * __u16 avail_flags; - * __u16 avail_idx; - * __u16 available[num]; - * __u16 used_event_idx; - * - * // Padding to the next align boundary. - * char pad[]; - * - * // A ring of used descriptor heads with free-running index. - * __u16 used_flags; - * __u16 used_idx; - * struct vring_used_elem used[num]; - * __u16 avail_event_idx; - * }; - */ -/* We publish the used event index at the end of the available ring, and vice - * versa. They are at the end for backwards compatibility. */ -#define vring_used_event(vr) ((vr)->avail->ring[(vr)->num]) -#define vring_avail_event(vr) (*(__u16 *)&(vr)->used->ring[(vr)->num]) - -static inline void vring_init(struct vring *vr, unsigned int num, void *p, - unsigned long align) -{ - vr->num = num; - vr->desc = p; - vr->avail = p + num*sizeof(struct vring_desc); - vr->used = (void *)(((unsigned long)&vr->avail->ring[num] + sizeof(__u16) - + align-1) & ~(align - 1)); -} - -static inline unsigned vring_size(unsigned int num, unsigned long align) -{ - return ((sizeof(struct vring_desc) * num + sizeof(__u16) * (3 + num) - + align - 1) & ~(align - 1)) - + sizeof(__u16) * 3 + sizeof(struct vring_used_elem) * num; -} - -/* The following is used with USED_EVENT_IDX and AVAIL_EVENT_IDX */ -/* Assuming a given event_idx value from the other size, if - * we have just incremented index from old to new_idx, - * should we trigger an event? */ -static inline int vring_need_event(__u16 event_idx, __u16 new_idx, __u16 old) -{ - /* Note: Xen has similar logic for notification hold-off - * in include/xen/interface/io/ring.h with req_event and req_prod - * corresponding to event_idx + 1 and new_idx respectively. - * Note also that req_event and req_prod in Xen start at 1, - * event indexes in virtio start at 0. */ - return (__u16)(new_idx - event_idx - 1) < (__u16)(new_idx - old); -} - -#ifdef __KERNEL__ #include <linux/irqreturn.h> +#include <uapi/linux/virtio_ring.h> + struct virtio_device; struct virtqueue; @@ -179,5 +21,4 @@ void vring_del_virtqueue(struct virtqueue *vq); void vring_transport_features(struct virtio_device *vdev); irqreturn_t vring_interrupt(int irq, void *_vq); -#endif /* __KERNEL__ */ #endif /* _LINUX_VIRTIO_RING_H */ diff --git a/include/linux/virtio_scsi.h b/include/linux/virtio_scsi.h index dc8d305b0e0..d6b4440387b 100644 --- a/include/linux/virtio_scsi.h +++ b/include/linux/virtio_scsi.h @@ -72,6 +72,7 @@ struct virtio_scsi_config { /* Feature Bits */ #define VIRTIO_SCSI_F_INOUT 0 #define VIRTIO_SCSI_F_HOTPLUG 1 +#define VIRTIO_SCSI_F_CHANGE 2 /* Response codes */ #define VIRTIO_SCSI_S_OK 0 @@ -108,6 +109,7 @@ struct virtio_scsi_config { #define VIRTIO_SCSI_T_NO_EVENT 0 #define VIRTIO_SCSI_T_TRANSPORT_RESET 1 #define VIRTIO_SCSI_T_ASYNC_NOTIFY 2 +#define VIRTIO_SCSI_T_PARAM_CHANGE 3 /* Reasons of transport reset event */ #define VIRTIO_SCSI_EVT_RESET_HARD 0 diff --git a/include/linux/vt.h b/include/linux/vt.h index 30a8dd9c83f..b186e043523 100644 --- a/include/linux/vt.h +++ b/include/linux/vt.h @@ -1,90 +1,8 @@ #ifndef _LINUX_VT_H #define _LINUX_VT_H +#include <uapi/linux/vt.h> -/* - * These constants are also useful for user-level apps (e.g., VC - * resizing). - */ -#define MIN_NR_CONSOLES 1 /* must be at least 1 */ -#define MAX_NR_CONSOLES 63 /* serial lines start at 64 */ -#define MAX_NR_USER_CONSOLES 63 /* must be root to allocate above this */ - /* Note: the ioctl VT_GETSTATE does not work for - consoles 16 and higher (since it returns a short) */ - -/* 0x56 is 'V', to avoid collision with termios and kd */ - -#define VT_OPENQRY 0x5600 /* find available vt */ - -struct vt_mode { - char mode; /* vt mode */ - char waitv; /* if set, hang on writes if not active */ - short relsig; /* signal to raise on release req */ - short acqsig; /* signal to raise on acquisition */ - short frsig; /* unused (set to 0) */ -}; -#define VT_GETMODE 0x5601 /* get mode of active vt */ -#define VT_SETMODE 0x5602 /* set mode of active vt */ -#define VT_AUTO 0x00 /* auto vt switching */ -#define VT_PROCESS 0x01 /* process controls switching */ -#define VT_ACKACQ 0x02 /* acknowledge switch */ - -struct vt_stat { - unsigned short v_active; /* active vt */ - unsigned short v_signal; /* signal to send */ - unsigned short v_state; /* vt bitmask */ -}; -#define VT_GETSTATE 0x5603 /* get global vt state info */ -#define VT_SENDSIG 0x5604 /* signal to send to bitmask of vts */ - -#define VT_RELDISP 0x5605 /* release display */ - -#define VT_ACTIVATE 0x5606 /* make vt active */ -#define VT_WAITACTIVE 0x5607 /* wait for vt active */ -#define VT_DISALLOCATE 0x5608 /* free memory associated to vt */ - -struct vt_sizes { - unsigned short v_rows; /* number of rows */ - unsigned short v_cols; /* number of columns */ - unsigned short v_scrollsize; /* number of lines of scrollback */ -}; -#define VT_RESIZE 0x5609 /* set kernel's idea of screensize */ - -struct vt_consize { - unsigned short v_rows; /* number of rows */ - unsigned short v_cols; /* number of columns */ - unsigned short v_vlin; /* number of pixel rows on screen */ - unsigned short v_clin; /* number of pixel rows per character */ - unsigned short v_vcol; /* number of pixel columns on screen */ - unsigned short v_ccol; /* number of pixel columns per character */ -}; -#define VT_RESIZEX 0x560A /* set kernel's idea of screensize + more */ -#define VT_LOCKSWITCH 0x560B /* disallow vt switching */ -#define VT_UNLOCKSWITCH 0x560C /* allow vt switching */ -#define VT_GETHIFONTMASK 0x560D /* return hi font mask */ - -struct vt_event { - unsigned int event; -#define VT_EVENT_SWITCH 0x0001 /* Console switch */ -#define VT_EVENT_BLANK 0x0002 /* Screen blank */ -#define VT_EVENT_UNBLANK 0x0004 /* Screen unblank */ -#define VT_EVENT_RESIZE 0x0008 /* Resize display */ -#define VT_MAX_EVENT 0x000F - unsigned int oldev; /* Old console */ - unsigned int newev; /* New console (if changing) */ - unsigned int pad[4]; /* Padding for expansion */ -}; - -#define VT_WAITEVENT 0x560E /* Wait for an event */ - -struct vt_setactivate { - unsigned int console; - struct vt_mode mode; -}; - -#define VT_SETACTIVATE 0x560F /* Activate and set the mode of a console */ - -#ifdef __KERNEL__ /* Virtual Terminal events. */ #define VT_ALLOCATE 0x0001 /* Console got allocated */ @@ -106,8 +24,4 @@ static inline int vt_kmsg_redirect(int new) #endif -#endif /* __KERNEL__ */ - -#define vt_get_kmsg_redirect() vt_kmsg_redirect(-1) - #endif /* _LINUX_VT_H */ diff --git a/include/linux/wait.h b/include/linux/wait.h index 1dee81c41ff..168dfe122dd 100644 --- a/include/linux/wait.h +++ b/include/linux/wait.h @@ -1,28 +1,12 @@ #ifndef _LINUX_WAIT_H #define _LINUX_WAIT_H -#define WNOHANG 0x00000001 -#define WUNTRACED 0x00000002 -#define WSTOPPED WUNTRACED -#define WEXITED 0x00000004 -#define WCONTINUED 0x00000008 -#define WNOWAIT 0x01000000 /* Don't reap, just poll status. */ - -#define __WNOTHREAD 0x20000000 /* Don't wait on children of other threads in this group */ -#define __WALL 0x40000000 /* Wait on all children, regardless of type */ -#define __WCLONE 0x80000000 /* Wait only on non-SIGCHLD children */ - -/* First argument to waitid: */ -#define P_ALL 0 -#define P_PID 1 -#define P_PGID 2 - -#ifdef __KERNEL__ #include <linux/list.h> #include <linux/stddef.h> #include <linux/spinlock.h> #include <asm/current.h> +#include <uapi/linux/wait.h> typedef struct __wait_queue wait_queue_t; typedef int (*wait_queue_func_t)(wait_queue_t *wait, unsigned mode, int flags, void *key); @@ -663,6 +647,4 @@ static inline int wait_on_bit_lock(void *word, int bit, return out_of_line_wait_on_bit_lock(word, bit, action, mode); } -#endif /* __KERNEL__ */ - #endif diff --git a/include/linux/wanrouter.h b/include/linux/wanrouter.h index 3157cc1fada..cec4b415976 100644 --- a/include/linux/wanrouter.h +++ b/include/linux/wanrouter.h @@ -43,413 +43,11 @@ * Jan 16, 1997 Gene Kozin router_devlist made public * Jan 02, 1997 Gene Kozin Initial version (based on wanpipe.h). *****************************************************************************/ - #ifndef _ROUTER_H #define _ROUTER_H -#define ROUTER_NAME "wanrouter" /* in case we ever change it */ -#define ROUTER_VERSION 1 /* version number */ -#define ROUTER_RELEASE 1 /* release (minor version) number */ -#define ROUTER_IOCTL 'W' /* for IOCTL calls */ -#define ROUTER_MAGIC 0x524D4157L /* signature: 'WANR' reversed */ - -/* IOCTL codes for /proc/router/<device> entries (up to 255) */ -enum router_ioctls -{ - ROUTER_SETUP = ROUTER_IOCTL<<8, /* configure device */ - ROUTER_DOWN, /* shut down device */ - ROUTER_STAT, /* get device status */ - ROUTER_IFNEW, /* add interface */ - ROUTER_IFDEL, /* delete interface */ - ROUTER_IFSTAT, /* get interface status */ - ROUTER_USER = (ROUTER_IOCTL<<8)+16, /* driver-specific calls */ - ROUTER_USER_MAX = (ROUTER_IOCTL<<8)+31 -}; - -/* identifiers for displaying proc file data for dual port adapters */ -#define PROC_DATA_PORT_0 0x8000 /* the data is for port 0 */ -#define PROC_DATA_PORT_1 0x8001 /* the data is for port 1 */ - -/* NLPID for packet encapsulation (ISO/IEC TR 9577) */ -#define NLPID_IP 0xCC /* Internet Protocol Datagram */ -#define NLPID_SNAP 0x80 /* IEEE Subnetwork Access Protocol */ -#define NLPID_CLNP 0x81 /* ISO/IEC 8473 */ -#define NLPID_ESIS 0x82 /* ISO/IEC 9542 */ -#define NLPID_ISIS 0x83 /* ISO/IEC ISIS */ -#define NLPID_Q933 0x08 /* CCITT Q.933 */ - -/* Miscellaneous */ -#define WAN_IFNAME_SZ 15 /* max length of the interface name */ -#define WAN_DRVNAME_SZ 15 /* max length of the link driver name */ -#define WAN_ADDRESS_SZ 31 /* max length of the WAN media address */ -#define USED_BY_FIELD 8 /* max length of the used by field */ - -/* Defines for UDP PACKET TYPE */ -#define UDP_PTPIPE_TYPE 0x01 -#define UDP_FPIPE_TYPE 0x02 -#define UDP_CPIPE_TYPE 0x03 -#define UDP_DRVSTATS_TYPE 0x04 -#define UDP_INVALID_TYPE 0x05 - -/* Command return code */ -#define CMD_OK 0 /* normal firmware return code */ -#define CMD_TIMEOUT 0xFF /* firmware command timed out */ - -/* UDP Packet Management */ -#define UDP_PKT_FRM_STACK 0x00 -#define UDP_PKT_FRM_NETWORK 0x01 - -/* Maximum interrupt test counter */ -#define MAX_INTR_TEST_COUNTER 100 - -/* Critical Values for RACE conditions*/ -#define CRITICAL_IN_ISR 0xA1 -#define CRITICAL_INTR_HANDLED 0xB1 - -/****** Data Types **********************************************************/ - -/*---------------------------------------------------------------------------- - * X.25-specific link-level configuration. - */ -typedef struct wan_x25_conf -{ - unsigned lo_pvc; /* lowest permanent circuit number */ - unsigned hi_pvc; /* highest permanent circuit number */ - unsigned lo_svc; /* lowest switched circuit number */ - unsigned hi_svc; /* highest switched circuit number */ - unsigned hdlc_window; /* HDLC window size (1..7) */ - unsigned pkt_window; /* X.25 packet window size (1..7) */ - unsigned t1; /* HDLC timer T1, sec (1..30) */ - unsigned t2; /* HDLC timer T2, sec (0..29) */ - unsigned t4; /* HDLC supervisory frame timer = T4 * T1 */ - unsigned n2; /* HDLC retransmission limit (1..30) */ - unsigned t10_t20; /* X.25 RESTART timeout, sec (1..255) */ - unsigned t11_t21; /* X.25 CALL timeout, sec (1..255) */ - unsigned t12_t22; /* X.25 RESET timeout, sec (1..255) */ - unsigned t13_t23; /* X.25 CLEAR timeout, sec (1..255) */ - unsigned t16_t26; /* X.25 INTERRUPT timeout, sec (1..255) */ - unsigned t28; /* X.25 REGISTRATION timeout, sec (1..255) */ - unsigned r10_r20; /* RESTART retransmission limit (0..250) */ - unsigned r12_r22; /* RESET retransmission limit (0..250) */ - unsigned r13_r23; /* CLEAR retransmission limit (0..250) */ - unsigned ccitt_compat; /* compatibility mode: 1988/1984/1980 */ - unsigned x25_conf_opt; /* User defined x25 config optoins */ - unsigned char LAPB_hdlc_only; /* Run in HDLC only mode */ - unsigned char logging; /* Control connection logging */ - unsigned char oob_on_modem; /* Whether to send modem status to the user app */ -} wan_x25_conf_t; - -/*---------------------------------------------------------------------------- - * Frame relay specific link-level configuration. - */ -typedef struct wan_fr_conf -{ - unsigned signalling; /* local in-channel signalling type */ - unsigned t391; /* link integrity verification timer */ - unsigned t392; /* polling verification timer */ - unsigned n391; /* full status polling cycle counter */ - unsigned n392; /* error threshold counter */ - unsigned n393; /* monitored events counter */ - unsigned dlci_num; /* number of DLCs (access node) */ - unsigned dlci[100]; /* List of all DLCIs */ -} wan_fr_conf_t; - -/*---------------------------------------------------------------------------- - * PPP-specific link-level configuration. - */ -typedef struct wan_ppp_conf -{ - unsigned restart_tmr; /* restart timer */ - unsigned auth_rsrt_tmr; /* authentication timer */ - unsigned auth_wait_tmr; /* authentication timer */ - unsigned mdm_fail_tmr; /* modem failure timer */ - unsigned dtr_drop_tmr; /* DTR drop timer */ - unsigned connect_tmout; /* connection timeout */ - unsigned conf_retry; /* max. retry */ - unsigned term_retry; /* max. retry */ - unsigned fail_retry; /* max. retry */ - unsigned auth_retry; /* max. retry */ - unsigned auth_options; /* authentication opt. */ - unsigned ip_options; /* IP options */ - char authenticator; /* AUTHENTICATOR or not */ - char ip_mode; /* Static/Host/Peer */ -} wan_ppp_conf_t; - -/*---------------------------------------------------------------------------- - * CHDLC-specific link-level configuration. - */ -typedef struct wan_chdlc_conf -{ - unsigned char ignore_dcd; /* Protocol options: */ - unsigned char ignore_cts; /* Ignore these to determine */ - unsigned char ignore_keepalive; /* link status (Yes or No) */ - unsigned char hdlc_streaming; /* hdlc_streaming mode (Y/N) */ - unsigned char receive_only; /* no transmit buffering (Y/N) */ - unsigned keepalive_tx_tmr; /* transmit keepalive timer */ - unsigned keepalive_rx_tmr; /* receive keepalive timer */ - unsigned keepalive_err_margin; /* keepalive_error_tolerance */ - unsigned slarp_timer; /* SLARP request timer */ -} wan_chdlc_conf_t; - - -/*---------------------------------------------------------------------------- - * WAN device configuration. Passed to ROUTER_SETUP IOCTL. - */ -typedef struct wandev_conf -{ - unsigned magic; /* magic number (for verification) */ - unsigned config_id; /* configuration structure identifier */ - /****** hardware configuration ******/ - unsigned ioport; /* adapter I/O port base */ - unsigned long maddr; /* dual-port memory address */ - unsigned msize; /* dual-port memory size */ - int irq; /* interrupt request level */ - int dma; /* DMA request level */ - char S514_CPU_no[1]; /* S514 PCI adapter CPU number ('A' or 'B') */ - unsigned PCI_slot_no; /* S514 PCI adapter slot number */ - char auto_pci_cfg; /* S515 PCI automatic slot detection */ - char comm_port; /* Communication Port (PRI=0, SEC=1) */ - unsigned bps; /* data transfer rate */ - unsigned mtu; /* maximum transmit unit size */ - unsigned udp_port; /* UDP port for management */ - unsigned char ttl; /* Time To Live for UDP security */ - unsigned char ft1; /* FT1 Configurator Option */ - char interface; /* RS-232/V.35, etc. */ - char clocking; /* external/internal */ - char line_coding; /* NRZ/NRZI/FM0/FM1, etc. */ - char station; /* DTE/DCE, primary/secondary, etc. */ - char connection; /* permanent/switched/on-demand */ - char read_mode; /* read mode: Polling or interrupt */ - char receive_only; /* disable tx buffers */ - char tty; /* Create a fake tty device */ - unsigned tty_major; /* Major number for wanpipe tty device */ - unsigned tty_minor; /* Minor number for wanpipe tty device */ - unsigned tty_mode; /* TTY operation mode SYNC or ASYNC */ - char backup; /* Backup Mode */ - unsigned hw_opt[4]; /* other hardware options */ - unsigned reserved[4]; - /****** arbitrary data ***************/ - unsigned data_size; /* data buffer size */ - void* data; /* data buffer, e.g. firmware */ - union /****** protocol-specific ************/ - { - wan_x25_conf_t x25; /* X.25 configuration */ - wan_ppp_conf_t ppp; /* PPP configuration */ - wan_fr_conf_t fr; /* frame relay configuration */ - wan_chdlc_conf_t chdlc; /* Cisco HDLC configuration */ - } u; -} wandev_conf_t; - -/* 'config_id' definitions */ -#define WANCONFIG_X25 101 /* X.25 link */ -#define WANCONFIG_FR 102 /* frame relay link */ -#define WANCONFIG_PPP 103 /* synchronous PPP link */ -#define WANCONFIG_CHDLC 104 /* Cisco HDLC Link */ -#define WANCONFIG_BSC 105 /* BiSync Streaming */ -#define WANCONFIG_HDLC 106 /* HDLC Support */ -#define WANCONFIG_MPPP 107 /* Multi Port PPP over RAW CHDLC */ - -/* - * Configuration options defines. - */ -/* general options */ -#define WANOPT_OFF 0 -#define WANOPT_ON 1 -#define WANOPT_NO 0 -#define WANOPT_YES 1 - -/* intercace options */ -#define WANOPT_RS232 0 -#define WANOPT_V35 1 - -/* data encoding options */ -#define WANOPT_NRZ 0 -#define WANOPT_NRZI 1 -#define WANOPT_FM0 2 -#define WANOPT_FM1 3 - -/* link type options */ -#define WANOPT_POINTTOPOINT 0 /* RTS always active */ -#define WANOPT_MULTIDROP 1 /* RTS is active when transmitting */ - -/* clocking options */ -#define WANOPT_EXTERNAL 0 -#define WANOPT_INTERNAL 1 - -/* station options */ -#define WANOPT_DTE 0 -#define WANOPT_DCE 1 -#define WANOPT_CPE 0 -#define WANOPT_NODE 1 -#define WANOPT_SECONDARY 0 -#define WANOPT_PRIMARY 1 - -/* connection options */ -#define WANOPT_PERMANENT 0 /* DTR always active */ -#define WANOPT_SWITCHED 1 /* use DTR to setup link (dial-up) */ -#define WANOPT_ONDEMAND 2 /* activate DTR only before sending */ - -/* frame relay in-channel signalling */ -#define WANOPT_FR_ANSI 1 /* ANSI T1.617 Annex D */ -#define WANOPT_FR_Q933 2 /* ITU Q.933A */ -#define WANOPT_FR_LMI 3 /* LMI */ - -/* PPP IP Mode Options */ -#define WANOPT_PPP_STATIC 0 -#define WANOPT_PPP_HOST 1 -#define WANOPT_PPP_PEER 2 - -/* ASY Mode Options */ -#define WANOPT_ONE 1 -#define WANOPT_TWO 2 -#define WANOPT_ONE_AND_HALF 3 - -#define WANOPT_NONE 0 -#define WANOPT_ODD 1 -#define WANOPT_EVEN 2 - -/* CHDLC Protocol Options */ -/* DF Commented out for now. - -#define WANOPT_CHDLC_NO_DCD IGNORE_DCD_FOR_LINK_STAT -#define WANOPT_CHDLC_NO_CTS IGNORE_CTS_FOR_LINK_STAT -#define WANOPT_CHDLC_NO_KEEPALIVE IGNORE_KPALV_FOR_LINK_STAT -*/ - -/* Port options */ -#define WANOPT_PRI 0 -#define WANOPT_SEC 1 -/* read mode */ -#define WANOPT_INTR 0 -#define WANOPT_POLL 1 - - -#define WANOPT_TTY_SYNC 0 -#define WANOPT_TTY_ASYNC 1 -/*---------------------------------------------------------------------------- - * WAN Link Status Info (for ROUTER_STAT IOCTL). - */ -typedef struct wandev_stat -{ - unsigned state; /* link state */ - unsigned ndev; /* number of configured interfaces */ - - /* link/interface configuration */ - unsigned connection; /* permanent/switched/on-demand */ - unsigned media_type; /* Frame relay/PPP/X.25/SDLC, etc. */ - unsigned mtu; /* max. transmit unit for this device */ - - /* physical level statistics */ - unsigned modem_status; /* modem status */ - unsigned rx_frames; /* received frames count */ - unsigned rx_overruns; /* receiver overrun error count */ - unsigned rx_crc_err; /* receive CRC error count */ - unsigned rx_aborts; /* received aborted frames count */ - unsigned rx_bad_length; /* unexpetedly long/short frames count */ - unsigned rx_dropped; /* frames discarded at device level */ - unsigned tx_frames; /* transmitted frames count */ - unsigned tx_underruns; /* aborted transmissions (underruns) count */ - unsigned tx_timeouts; /* transmission timeouts */ - unsigned tx_rejects; /* other transmit errors */ - - /* media level statistics */ - unsigned rx_bad_format; /* frames with invalid format */ - unsigned rx_bad_addr; /* frames with invalid media address */ - unsigned tx_retries; /* frames re-transmitted */ - unsigned reserved[16]; /* reserved for future use */ -} wandev_stat_t; - -/* 'state' defines */ -enum wan_states -{ - WAN_UNCONFIGURED, /* link/channel is not configured */ - WAN_DISCONNECTED, /* link/channel is disconnected */ - WAN_CONNECTING, /* connection is in progress */ - WAN_CONNECTED, /* link/channel is operational */ - WAN_LIMIT, /* for verification only */ - WAN_DUALPORT, /* for Dual Port cards */ - WAN_DISCONNECTING, - WAN_FT1_READY /* FT1 Configurator Ready */ -}; - -enum { - WAN_LOCAL_IP, - WAN_POINTOPOINT_IP, - WAN_NETMASK_IP, - WAN_BROADCAST_IP -}; - -/* 'modem_status' masks */ -#define WAN_MODEM_CTS 0x0001 /* CTS line active */ -#define WAN_MODEM_DCD 0x0002 /* DCD line active */ -#define WAN_MODEM_DTR 0x0010 /* DTR line active */ -#define WAN_MODEM_RTS 0x0020 /* RTS line active */ - -/*---------------------------------------------------------------------------- - * WAN interface (logical channel) configuration (for ROUTER_IFNEW IOCTL). - */ -typedef struct wanif_conf -{ - unsigned magic; /* magic number */ - unsigned config_id; /* configuration identifier */ - char name[WAN_IFNAME_SZ+1]; /* interface name, ASCIIZ */ - char addr[WAN_ADDRESS_SZ+1]; /* media address, ASCIIZ */ - char usedby[USED_BY_FIELD]; /* used by API or WANPIPE */ - unsigned idle_timeout; /* sec, before disconnecting */ - unsigned hold_timeout; /* sec, before re-connecting */ - unsigned cir; /* Committed Information Rate fwd,bwd*/ - unsigned bc; /* Committed Burst Size fwd, bwd */ - unsigned be; /* Excess Burst Size fwd, bwd */ - unsigned char enable_IPX; /* Enable or Disable IPX */ - unsigned char inarp; /* Send Inverse ARP requests Y/N */ - unsigned inarp_interval; /* sec, between InARP requests */ - unsigned long network_number; /* Network Number for IPX */ - char mc; /* Multicast on or off */ - char local_addr[WAN_ADDRESS_SZ+1];/* local media address, ASCIIZ */ - unsigned char port; /* board port */ - unsigned char protocol; /* prococol used in this channel (TCPOX25 or X25) */ - char pap; /* PAP enabled or disabled */ - char chap; /* CHAP enabled or disabled */ - unsigned char userid[511]; /* List of User Id */ - unsigned char passwd[511]; /* List of passwords */ - unsigned char sysname[31]; /* Name of the system */ - unsigned char ignore_dcd; /* Protocol options: */ - unsigned char ignore_cts; /* Ignore these to determine */ - unsigned char ignore_keepalive; /* link status (Yes or No) */ - unsigned char hdlc_streaming; /* Hdlc streaming mode (Y/N) */ - unsigned keepalive_tx_tmr; /* transmit keepalive timer */ - unsigned keepalive_rx_tmr; /* receive keepalive timer */ - unsigned keepalive_err_margin; /* keepalive_error_tolerance */ - unsigned slarp_timer; /* SLARP request timer */ - unsigned char ttl; /* Time To Live for UDP security */ - char interface; /* RS-232/V.35, etc. */ - char clocking; /* external/internal */ - unsigned bps; /* data transfer rate */ - unsigned mtu; /* maximum transmit unit size */ - unsigned char if_down; /* brind down interface when disconnected */ - unsigned char gateway; /* Is this interface a gateway */ - unsigned char true_if_encoding; /* Set the dev->type to true board protocol */ - - unsigned char asy_data_trans; /* async API options */ - unsigned char rts_hs_for_receive; /* async Protocol options */ - unsigned char xon_xoff_hs_for_receive; - unsigned char xon_xoff_hs_for_transmit; - unsigned char dcd_hs_for_transmit; - unsigned char cts_hs_for_transmit; - unsigned char async_mode; - unsigned tx_bits_per_char; - unsigned rx_bits_per_char; - unsigned stop_bits; - unsigned char parity; - unsigned break_timer; - unsigned inter_char_timer; - unsigned rx_complete_length; - unsigned xon_char; - unsigned xoff_char; - unsigned char receive_only; /* no transmit buffering (Y/N) */ -} wanif_conf_t; +#include <uapi/linux/wanrouter.h> -#ifdef __KERNEL__ /****** Kernel Interface ****************************************************/ #include <linux/fs.h> /* support for device drivers */ @@ -528,5 +126,4 @@ extern long wanrouter_ioctl(struct file *file, unsigned int cmd, unsigned long a /* list of registered devices */ extern struct wan_device *wanrouter_router_devlist; -#endif /* __KERNEL__ */ #endif /* _ROUTER_H */ diff --git a/include/linux/watchdog.h b/include/linux/watchdog.h index da70f0facd2..b7f45d48b2d 100644 --- a/include/linux/watchdog.h +++ b/include/linux/watchdog.h @@ -5,59 +5,14 @@ * by Ken Hollis <khollis@bitgate.com> * */ - #ifndef _LINUX_WATCHDOG_H #define _LINUX_WATCHDOG_H -#include <linux/ioctl.h> -#include <linux/types.h> - -#define WATCHDOG_IOCTL_BASE 'W' - -struct watchdog_info { - __u32 options; /* Options the card/driver supports */ - __u32 firmware_version; /* Firmware version of the card */ - __u8 identity[32]; /* Identity of the board */ -}; - -#define WDIOC_GETSUPPORT _IOR(WATCHDOG_IOCTL_BASE, 0, struct watchdog_info) -#define WDIOC_GETSTATUS _IOR(WATCHDOG_IOCTL_BASE, 1, int) -#define WDIOC_GETBOOTSTATUS _IOR(WATCHDOG_IOCTL_BASE, 2, int) -#define WDIOC_GETTEMP _IOR(WATCHDOG_IOCTL_BASE, 3, int) -#define WDIOC_SETOPTIONS _IOR(WATCHDOG_IOCTL_BASE, 4, int) -#define WDIOC_KEEPALIVE _IOR(WATCHDOG_IOCTL_BASE, 5, int) -#define WDIOC_SETTIMEOUT _IOWR(WATCHDOG_IOCTL_BASE, 6, int) -#define WDIOC_GETTIMEOUT _IOR(WATCHDOG_IOCTL_BASE, 7, int) -#define WDIOC_SETPRETIMEOUT _IOWR(WATCHDOG_IOCTL_BASE, 8, int) -#define WDIOC_GETPRETIMEOUT _IOR(WATCHDOG_IOCTL_BASE, 9, int) -#define WDIOC_GETTIMELEFT _IOR(WATCHDOG_IOCTL_BASE, 10, int) - -#define WDIOF_UNKNOWN -1 /* Unknown flag error */ -#define WDIOS_UNKNOWN -1 /* Unknown status error */ - -#define WDIOF_OVERHEAT 0x0001 /* Reset due to CPU overheat */ -#define WDIOF_FANFAULT 0x0002 /* Fan failed */ -#define WDIOF_EXTERN1 0x0004 /* External relay 1 */ -#define WDIOF_EXTERN2 0x0008 /* External relay 2 */ -#define WDIOF_POWERUNDER 0x0010 /* Power bad/power fault */ -#define WDIOF_CARDRESET 0x0020 /* Card previously reset the CPU */ -#define WDIOF_POWEROVER 0x0040 /* Power over voltage */ -#define WDIOF_SETTIMEOUT 0x0080 /* Set timeout (in seconds) */ -#define WDIOF_MAGICCLOSE 0x0100 /* Supports magic close char */ -#define WDIOF_PRETIMEOUT 0x0200 /* Pretimeout (in seconds), get/set */ -#define WDIOF_ALARMONLY 0x0400 /* Watchdog triggers a management or - other external alarm not a reboot */ -#define WDIOF_KEEPALIVEPING 0x8000 /* Keep alive ping reply */ - -#define WDIOS_DISABLECARD 0x0001 /* Turn off the watchdog timer */ -#define WDIOS_ENABLECARD 0x0002 /* Turn on the watchdog timer */ -#define WDIOS_TEMPPANIC 0x0004 /* Kernel panic on temperature trip */ - -#ifdef __KERNEL__ #include <linux/bitops.h> #include <linux/device.h> #include <linux/cdev.h> +#include <uapi/linux/watchdog.h> struct watchdog_ops; struct watchdog_device; @@ -178,6 +133,4 @@ static inline void *watchdog_get_drvdata(struct watchdog_device *wdd) extern int watchdog_register_device(struct watchdog_device *); extern void watchdog_unregister_device(struct watchdog_device *); -#endif /* __KERNEL__ */ - #endif /* ifndef _LINUX_WATCHDOG_H */ diff --git a/include/linux/wimax/Kbuild b/include/linux/wimax/Kbuild index 3cb4f269bb0..e69de29bb2d 100644 --- a/include/linux/wimax/Kbuild +++ b/include/linux/wimax/Kbuild @@ -1 +0,0 @@ -header-y += i2400m.h diff --git a/include/linux/wireless.h b/include/linux/wireless.h index 4395b28bb86..4ea4c6e2383 100644 --- a/include/linux/wireless.h +++ b/include/linux/wireless.h @@ -6,690 +6,11 @@ * Authors : Jean Tourrilhes - HPL - <jt@hpl.hp.com> * Copyright (c) 1997-2007 Jean Tourrilhes, All Rights Reserved. */ - #ifndef _LINUX_WIRELESS_H #define _LINUX_WIRELESS_H -/************************** DOCUMENTATION **************************/ -/* - * Initial APIs (1996 -> onward) : - * ----------------------------- - * Basically, the wireless extensions are for now a set of standard ioctl - * call + /proc/net/wireless - * - * The entry /proc/net/wireless give statistics and information on the - * driver. - * This is better than having each driver having its entry because - * its centralised and we may remove the driver module safely. - * - * Ioctl are used to configure the driver and issue commands. This is - * better than command line options of insmod because we may want to - * change dynamically (while the driver is running) some parameters. - * - * The ioctl mechanimsm are copied from standard devices ioctl. - * We have the list of command plus a structure descibing the - * data exchanged... - * Note that to add these ioctl, I was obliged to modify : - * # net/core/dev.c (two place + add include) - * # net/ipv4/af_inet.c (one place + add include) - * - * /proc/net/wireless is a copy of /proc/net/dev. - * We have a structure for data passed from the driver to /proc/net/wireless - * Too add this, I've modified : - * # net/core/dev.c (two other places) - * # include/linux/netdevice.h (one place) - * # include/linux/proc_fs.h (one place) - * - * New driver API (2002 -> onward) : - * ------------------------------- - * This file is only concerned with the user space API and common definitions. - * The new driver API is defined and documented in : - * # include/net/iw_handler.h - * - * Note as well that /proc/net/wireless implementation has now moved in : - * # net/core/wireless.c - * - * Wireless Events (2002 -> onward) : - * -------------------------------- - * Events are defined at the end of this file, and implemented in : - * # net/core/wireless.c - * - * Other comments : - * -------------- - * Do not add here things that are redundant with other mechanisms - * (drivers init, ifconfig, /proc/net/dev, ...) and with are not - * wireless specific. - * - * These wireless extensions are not magic : each driver has to provide - * support for them... - * - * IMPORTANT NOTE : As everything in the kernel, this is very much a - * work in progress. Contact me if you have ideas of improvements... - */ - -/***************************** INCLUDES *****************************/ - -#include <linux/types.h> /* for __u* and __s* typedefs */ -#include <linux/socket.h> /* for "struct sockaddr" et al */ -#include <linux/if.h> /* for IFNAMSIZ and co... */ - -/***************************** VERSION *****************************/ -/* - * This constant is used to know the availability of the wireless - * extensions and to know which version of wireless extensions it is - * (there is some stuff that will be added in the future...) - * I just plan to increment with each new version. - */ -#define WIRELESS_EXT 22 - -/* - * Changes : - * - * V2 to V3 - * -------- - * Alan Cox start some incompatibles changes. I've integrated a bit more. - * - Encryption renamed to Encode to avoid US regulation problems - * - Frequency changed from float to struct to avoid problems on old 386 - * - * V3 to V4 - * -------- - * - Add sensitivity - * - * V4 to V5 - * -------- - * - Missing encoding definitions in range - * - Access points stuff - * - * V5 to V6 - * -------- - * - 802.11 support (ESSID ioctls) - * - * V6 to V7 - * -------- - * - define IW_ESSID_MAX_SIZE and IW_MAX_AP - * - * V7 to V8 - * -------- - * - Changed my e-mail address - * - More 802.11 support (nickname, rate, rts, frag) - * - List index in frequencies - * - * V8 to V9 - * -------- - * - Support for 'mode of operation' (ad-hoc, managed...) - * - Support for unicast and multicast power saving - * - Change encoding to support larger tokens (>64 bits) - * - Updated iw_params (disable, flags) and use it for NWID - * - Extracted iw_point from iwreq for clarity - * - * V9 to V10 - * --------- - * - Add PM capability to range structure - * - Add PM modifier : MAX/MIN/RELATIVE - * - Add encoding option : IW_ENCODE_NOKEY - * - Add TxPower ioctls (work like TxRate) - * - * V10 to V11 - * ---------- - * - Add WE version in range (help backward/forward compatibility) - * - Add retry ioctls (work like PM) - * - * V11 to V12 - * ---------- - * - Add SIOCSIWSTATS to get /proc/net/wireless programatically - * - Add DEV PRIVATE IOCTL to avoid collisions in SIOCDEVPRIVATE space - * - Add new statistics (frag, retry, beacon) - * - Add average quality (for user space calibration) - * - * V12 to V13 - * ---------- - * - Document creation of new driver API. - * - Extract union iwreq_data from struct iwreq (for new driver API). - * - Rename SIOCSIWNAME as SIOCSIWCOMMIT - * - * V13 to V14 - * ---------- - * - Wireless Events support : define struct iw_event - * - Define additional specific event numbers - * - Add "addr" and "param" fields in union iwreq_data - * - AP scanning stuff (SIOCSIWSCAN and friends) - * - * V14 to V15 - * ---------- - * - Add IW_PRIV_TYPE_ADDR for struct sockaddr private arg - * - Make struct iw_freq signed (both m & e), add explicit padding - * - Add IWEVCUSTOM for driver specific event/scanning token - * - Add IW_MAX_GET_SPY for driver returning a lot of addresses - * - Add IW_TXPOW_RANGE for range of Tx Powers - * - Add IWEVREGISTERED & IWEVEXPIRED events for Access Points - * - Add IW_MODE_MONITOR for passive monitor - * - * V15 to V16 - * ---------- - * - Increase the number of bitrates in iw_range to 32 (for 802.11g) - * - Increase the number of frequencies in iw_range to 32 (for 802.11b+a) - * - Reshuffle struct iw_range for increases, add filler - * - Increase IW_MAX_AP to 64 for driver returning a lot of addresses - * - Remove IW_MAX_GET_SPY because conflict with enhanced spy support - * - Add SIOCSIWTHRSPY/SIOCGIWTHRSPY and "struct iw_thrspy" - * - Add IW_ENCODE_TEMP and iw_range->encoding_login_index - * - * V16 to V17 - * ---------- - * - Add flags to frequency -> auto/fixed - * - Document (struct iw_quality *)->updated, add new flags (INVALID) - * - Wireless Event capability in struct iw_range - * - Add support for relative TxPower (yick !) - * - * V17 to V18 (From Jouni Malinen <j@w1.fi>) - * ---------- - * - Add support for WPA/WPA2 - * - Add extended encoding configuration (SIOCSIWENCODEEXT and - * SIOCGIWENCODEEXT) - * - Add SIOCSIWGENIE/SIOCGIWGENIE - * - Add SIOCSIWMLME - * - Add SIOCSIWPMKSA - * - Add struct iw_range bit field for supported encoding capabilities - * - Add optional scan request parameters for SIOCSIWSCAN - * - Add SIOCSIWAUTH/SIOCGIWAUTH for setting authentication and WPA - * related parameters (extensible up to 4096 parameter values) - * - Add wireless events: IWEVGENIE, IWEVMICHAELMICFAILURE, - * IWEVASSOCREQIE, IWEVASSOCRESPIE, IWEVPMKIDCAND - * - * V18 to V19 - * ---------- - * - Remove (struct iw_point *)->pointer from events and streams - * - Remove header includes to help user space - * - Increase IW_ENCODING_TOKEN_MAX from 32 to 64 - * - Add IW_QUAL_ALL_UPDATED and IW_QUAL_ALL_INVALID macros - * - Add explicit flag to tell stats are in dBm : IW_QUAL_DBM - * - Add IW_IOCTL_IDX() and IW_EVENT_IDX() macros - * - * V19 to V20 - * ---------- - * - RtNetlink requests support (SET/GET) - * - * V20 to V21 - * ---------- - * - Remove (struct net_device *)->get_wireless_stats() - * - Change length in ESSID and NICK to strlen() instead of strlen()+1 - * - Add IW_RETRY_SHORT/IW_RETRY_LONG retry modifiers - * - Power/Retry relative values no longer * 100000 - * - Add explicit flag to tell stats are in 802.11k RCPI : IW_QUAL_RCPI - * - * V21 to V22 - * ---------- - * - Prevent leaking of kernel space in stream on 64 bits. - */ - -/**************************** CONSTANTS ****************************/ - -/* -------------------------- IOCTL LIST -------------------------- */ - -/* Wireless Identification */ -#define SIOCSIWCOMMIT 0x8B00 /* Commit pending changes to driver */ -#define SIOCGIWNAME 0x8B01 /* get name == wireless protocol */ -/* SIOCGIWNAME is used to verify the presence of Wireless Extensions. - * Common values : "IEEE 802.11-DS", "IEEE 802.11-FH", "IEEE 802.11b"... - * Don't put the name of your driver there, it's useless. */ - -/* Basic operations */ -#define SIOCSIWNWID 0x8B02 /* set network id (pre-802.11) */ -#define SIOCGIWNWID 0x8B03 /* get network id (the cell) */ -#define SIOCSIWFREQ 0x8B04 /* set channel/frequency (Hz) */ -#define SIOCGIWFREQ 0x8B05 /* get channel/frequency (Hz) */ -#define SIOCSIWMODE 0x8B06 /* set operation mode */ -#define SIOCGIWMODE 0x8B07 /* get operation mode */ -#define SIOCSIWSENS 0x8B08 /* set sensitivity (dBm) */ -#define SIOCGIWSENS 0x8B09 /* get sensitivity (dBm) */ - -/* Informative stuff */ -#define SIOCSIWRANGE 0x8B0A /* Unused */ -#define SIOCGIWRANGE 0x8B0B /* Get range of parameters */ -#define SIOCSIWPRIV 0x8B0C /* Unused */ -#define SIOCGIWPRIV 0x8B0D /* get private ioctl interface info */ -#define SIOCSIWSTATS 0x8B0E /* Unused */ -#define SIOCGIWSTATS 0x8B0F /* Get /proc/net/wireless stats */ -/* SIOCGIWSTATS is strictly used between user space and the kernel, and - * is never passed to the driver (i.e. the driver will never see it). */ - -/* Spy support (statistics per MAC address - used for Mobile IP support) */ -#define SIOCSIWSPY 0x8B10 /* set spy addresses */ -#define SIOCGIWSPY 0x8B11 /* get spy info (quality of link) */ -#define SIOCSIWTHRSPY 0x8B12 /* set spy threshold (spy event) */ -#define SIOCGIWTHRSPY 0x8B13 /* get spy threshold */ - -/* Access Point manipulation */ -#define SIOCSIWAP 0x8B14 /* set access point MAC addresses */ -#define SIOCGIWAP 0x8B15 /* get access point MAC addresses */ -#define SIOCGIWAPLIST 0x8B17 /* Deprecated in favor of scanning */ -#define SIOCSIWSCAN 0x8B18 /* trigger scanning (list cells) */ -#define SIOCGIWSCAN 0x8B19 /* get scanning results */ - -/* 802.11 specific support */ -#define SIOCSIWESSID 0x8B1A /* set ESSID (network name) */ -#define SIOCGIWESSID 0x8B1B /* get ESSID */ -#define SIOCSIWNICKN 0x8B1C /* set node name/nickname */ -#define SIOCGIWNICKN 0x8B1D /* get node name/nickname */ -/* As the ESSID and NICKN are strings up to 32 bytes long, it doesn't fit - * within the 'iwreq' structure, so we need to use the 'data' member to - * point to a string in user space, like it is done for RANGE... */ - -/* Other parameters useful in 802.11 and some other devices */ -#define SIOCSIWRATE 0x8B20 /* set default bit rate (bps) */ -#define SIOCGIWRATE 0x8B21 /* get default bit rate (bps) */ -#define SIOCSIWRTS 0x8B22 /* set RTS/CTS threshold (bytes) */ -#define SIOCGIWRTS 0x8B23 /* get RTS/CTS threshold (bytes) */ -#define SIOCSIWFRAG 0x8B24 /* set fragmentation thr (bytes) */ -#define SIOCGIWFRAG 0x8B25 /* get fragmentation thr (bytes) */ -#define SIOCSIWTXPOW 0x8B26 /* set transmit power (dBm) */ -#define SIOCGIWTXPOW 0x8B27 /* get transmit power (dBm) */ -#define SIOCSIWRETRY 0x8B28 /* set retry limits and lifetime */ -#define SIOCGIWRETRY 0x8B29 /* get retry limits and lifetime */ - -/* Encoding stuff (scrambling, hardware security, WEP...) */ -#define SIOCSIWENCODE 0x8B2A /* set encoding token & mode */ -#define SIOCGIWENCODE 0x8B2B /* get encoding token & mode */ -/* Power saving stuff (power management, unicast and multicast) */ -#define SIOCSIWPOWER 0x8B2C /* set Power Management settings */ -#define SIOCGIWPOWER 0x8B2D /* get Power Management settings */ - -/* WPA : Generic IEEE 802.11 informatiom element (e.g., for WPA/RSN/WMM). - * This ioctl uses struct iw_point and data buffer that includes IE id and len - * fields. More than one IE may be included in the request. Setting the generic - * IE to empty buffer (len=0) removes the generic IE from the driver. Drivers - * are allowed to generate their own WPA/RSN IEs, but in these cases, drivers - * are required to report the used IE as a wireless event, e.g., when - * associating with an AP. */ -#define SIOCSIWGENIE 0x8B30 /* set generic IE */ -#define SIOCGIWGENIE 0x8B31 /* get generic IE */ - -/* WPA : IEEE 802.11 MLME requests */ -#define SIOCSIWMLME 0x8B16 /* request MLME operation; uses - * struct iw_mlme */ -/* WPA : Authentication mode parameters */ -#define SIOCSIWAUTH 0x8B32 /* set authentication mode params */ -#define SIOCGIWAUTH 0x8B33 /* get authentication mode params */ - -/* WPA : Extended version of encoding configuration */ -#define SIOCSIWENCODEEXT 0x8B34 /* set encoding token & mode */ -#define SIOCGIWENCODEEXT 0x8B35 /* get encoding token & mode */ - -/* WPA2 : PMKSA cache management */ -#define SIOCSIWPMKSA 0x8B36 /* PMKSA cache operation */ - -/* -------------------- DEV PRIVATE IOCTL LIST -------------------- */ - -/* These 32 ioctl are wireless device private, for 16 commands. - * Each driver is free to use them for whatever purpose it chooses, - * however the driver *must* export the description of those ioctls - * with SIOCGIWPRIV and *must* use arguments as defined below. - * If you don't follow those rules, DaveM is going to hate you (reason : - * it make mixed 32/64bit operation impossible). - */ -#define SIOCIWFIRSTPRIV 0x8BE0 -#define SIOCIWLASTPRIV 0x8BFF -/* Previously, we were using SIOCDEVPRIVATE, but we now have our - * separate range because of collisions with other tools such as - * 'mii-tool'. - * We now have 32 commands, so a bit more space ;-). - * Also, all 'even' commands are only usable by root and don't return the - * content of ifr/iwr to user (but you are not obliged to use the set/get - * convention, just use every other two command). More details in iwpriv.c. - * And I repeat : you are not forced to use them with iwpriv, but you - * must be compliant with it. - */ - -/* ------------------------- IOCTL STUFF ------------------------- */ - -/* The first and the last (range) */ -#define SIOCIWFIRST 0x8B00 -#define SIOCIWLAST SIOCIWLASTPRIV /* 0x8BFF */ -#define IW_IOCTL_IDX(cmd) ((cmd) - SIOCIWFIRST) -#define IW_HANDLER(id, func) \ - [IW_IOCTL_IDX(id)] = func - -/* Odd : get (world access), even : set (root access) */ -#define IW_IS_SET(cmd) (!((cmd) & 0x1)) -#define IW_IS_GET(cmd) ((cmd) & 0x1) - -/* ----------------------- WIRELESS EVENTS ----------------------- */ -/* Those are *NOT* ioctls, do not issue request on them !!! */ -/* Most events use the same identifier as ioctl requests */ - -#define IWEVTXDROP 0x8C00 /* Packet dropped to excessive retry */ -#define IWEVQUAL 0x8C01 /* Quality part of statistics (scan) */ -#define IWEVCUSTOM 0x8C02 /* Driver specific ascii string */ -#define IWEVREGISTERED 0x8C03 /* Discovered a new node (AP mode) */ -#define IWEVEXPIRED 0x8C04 /* Expired a node (AP mode) */ -#define IWEVGENIE 0x8C05 /* Generic IE (WPA, RSN, WMM, ..) - * (scan results); This includes id and - * length fields. One IWEVGENIE may - * contain more than one IE. Scan - * results may contain one or more - * IWEVGENIE events. */ -#define IWEVMICHAELMICFAILURE 0x8C06 /* Michael MIC failure - * (struct iw_michaelmicfailure) - */ -#define IWEVASSOCREQIE 0x8C07 /* IEs used in (Re)Association Request. - * The data includes id and length - * fields and may contain more than one - * IE. This event is required in - * Managed mode if the driver - * generates its own WPA/RSN IE. This - * should be sent just before - * IWEVREGISTERED event for the - * association. */ -#define IWEVASSOCRESPIE 0x8C08 /* IEs used in (Re)Association - * Response. The data includes id and - * length fields and may contain more - * than one IE. This may be sent - * between IWEVASSOCREQIE and - * IWEVREGISTERED events for the - * association. */ -#define IWEVPMKIDCAND 0x8C09 /* PMKID candidate for RSN - * pre-authentication - * (struct iw_pmkid_cand) */ - -#define IWEVFIRST 0x8C00 -#define IW_EVENT_IDX(cmd) ((cmd) - IWEVFIRST) - -/* ------------------------- PRIVATE INFO ------------------------- */ -/* - * The following is used with SIOCGIWPRIV. It allow a driver to define - * the interface (name, type of data) for its private ioctl. - * Privates ioctl are SIOCIWFIRSTPRIV -> SIOCIWLASTPRIV - */ - -#define IW_PRIV_TYPE_MASK 0x7000 /* Type of arguments */ -#define IW_PRIV_TYPE_NONE 0x0000 -#define IW_PRIV_TYPE_BYTE 0x1000 /* Char as number */ -#define IW_PRIV_TYPE_CHAR 0x2000 /* Char as character */ -#define IW_PRIV_TYPE_INT 0x4000 /* 32 bits int */ -#define IW_PRIV_TYPE_FLOAT 0x5000 /* struct iw_freq */ -#define IW_PRIV_TYPE_ADDR 0x6000 /* struct sockaddr */ - -#define IW_PRIV_SIZE_FIXED 0x0800 /* Variable or fixed number of args */ - -#define IW_PRIV_SIZE_MASK 0x07FF /* Max number of those args */ - -/* - * Note : if the number of args is fixed and the size < 16 octets, - * instead of passing a pointer we will put args in the iwreq struct... - */ - -/* ----------------------- OTHER CONSTANTS ----------------------- */ - -/* Maximum frequencies in the range struct */ -#define IW_MAX_FREQUENCIES 32 -/* Note : if you have something like 80 frequencies, - * don't increase this constant and don't fill the frequency list. - * The user will be able to set by channel anyway... */ - -/* Maximum bit rates in the range struct */ -#define IW_MAX_BITRATES 32 - -/* Maximum tx powers in the range struct */ -#define IW_MAX_TXPOWER 8 -/* Note : if you more than 8 TXPowers, just set the max and min or - * a few of them in the struct iw_range. */ - -/* Maximum of address that you may set with SPY */ -#define IW_MAX_SPY 8 - -/* Maximum of address that you may get in the - list of access points in range */ -#define IW_MAX_AP 64 - -/* Maximum size of the ESSID and NICKN strings */ -#define IW_ESSID_MAX_SIZE 32 - -/* Modes of operation */ -#define IW_MODE_AUTO 0 /* Let the driver decides */ -#define IW_MODE_ADHOC 1 /* Single cell network */ -#define IW_MODE_INFRA 2 /* Multi cell network, roaming, ... */ -#define IW_MODE_MASTER 3 /* Synchronisation master or Access Point */ -#define IW_MODE_REPEAT 4 /* Wireless Repeater (forwarder) */ -#define IW_MODE_SECOND 5 /* Secondary master/repeater (backup) */ -#define IW_MODE_MONITOR 6 /* Passive monitor (listen only) */ -#define IW_MODE_MESH 7 /* Mesh (IEEE 802.11s) network */ - -/* Statistics flags (bitmask in updated) */ -#define IW_QUAL_QUAL_UPDATED 0x01 /* Value was updated since last read */ -#define IW_QUAL_LEVEL_UPDATED 0x02 -#define IW_QUAL_NOISE_UPDATED 0x04 -#define IW_QUAL_ALL_UPDATED 0x07 -#define IW_QUAL_DBM 0x08 /* Level + Noise are dBm */ -#define IW_QUAL_QUAL_INVALID 0x10 /* Driver doesn't provide value */ -#define IW_QUAL_LEVEL_INVALID 0x20 -#define IW_QUAL_NOISE_INVALID 0x40 -#define IW_QUAL_RCPI 0x80 /* Level + Noise are 802.11k RCPI */ -#define IW_QUAL_ALL_INVALID 0x70 - -/* Frequency flags */ -#define IW_FREQ_AUTO 0x00 /* Let the driver decides */ -#define IW_FREQ_FIXED 0x01 /* Force a specific value */ - -/* Maximum number of size of encoding token available - * they are listed in the range structure */ -#define IW_MAX_ENCODING_SIZES 8 - -/* Maximum size of the encoding token in bytes */ -#define IW_ENCODING_TOKEN_MAX 64 /* 512 bits (for now) */ - -/* Flags for encoding (along with the token) */ -#define IW_ENCODE_INDEX 0x00FF /* Token index (if needed) */ -#define IW_ENCODE_FLAGS 0xFF00 /* Flags defined below */ -#define IW_ENCODE_MODE 0xF000 /* Modes defined below */ -#define IW_ENCODE_DISABLED 0x8000 /* Encoding disabled */ -#define IW_ENCODE_ENABLED 0x0000 /* Encoding enabled */ -#define IW_ENCODE_RESTRICTED 0x4000 /* Refuse non-encoded packets */ -#define IW_ENCODE_OPEN 0x2000 /* Accept non-encoded packets */ -#define IW_ENCODE_NOKEY 0x0800 /* Key is write only, so not present */ -#define IW_ENCODE_TEMP 0x0400 /* Temporary key */ - -/* Power management flags available (along with the value, if any) */ -#define IW_POWER_ON 0x0000 /* No details... */ -#define IW_POWER_TYPE 0xF000 /* Type of parameter */ -#define IW_POWER_PERIOD 0x1000 /* Value is a period/duration of */ -#define IW_POWER_TIMEOUT 0x2000 /* Value is a timeout (to go asleep) */ -#define IW_POWER_MODE 0x0F00 /* Power Management mode */ -#define IW_POWER_UNICAST_R 0x0100 /* Receive only unicast messages */ -#define IW_POWER_MULTICAST_R 0x0200 /* Receive only multicast messages */ -#define IW_POWER_ALL_R 0x0300 /* Receive all messages though PM */ -#define IW_POWER_FORCE_S 0x0400 /* Force PM procedure for sending unicast */ -#define IW_POWER_REPEATER 0x0800 /* Repeat broadcast messages in PM period */ -#define IW_POWER_MODIFIER 0x000F /* Modify a parameter */ -#define IW_POWER_MIN 0x0001 /* Value is a minimum */ -#define IW_POWER_MAX 0x0002 /* Value is a maximum */ -#define IW_POWER_RELATIVE 0x0004 /* Value is not in seconds/ms/us */ - -/* Transmit Power flags available */ -#define IW_TXPOW_TYPE 0x00FF /* Type of value */ -#define IW_TXPOW_DBM 0x0000 /* Value is in dBm */ -#define IW_TXPOW_MWATT 0x0001 /* Value is in mW */ -#define IW_TXPOW_RELATIVE 0x0002 /* Value is in arbitrary units */ -#define IW_TXPOW_RANGE 0x1000 /* Range of value between min/max */ - -/* Retry limits and lifetime flags available */ -#define IW_RETRY_ON 0x0000 /* No details... */ -#define IW_RETRY_TYPE 0xF000 /* Type of parameter */ -#define IW_RETRY_LIMIT 0x1000 /* Maximum number of retries*/ -#define IW_RETRY_LIFETIME 0x2000 /* Maximum duration of retries in us */ -#define IW_RETRY_MODIFIER 0x00FF /* Modify a parameter */ -#define IW_RETRY_MIN 0x0001 /* Value is a minimum */ -#define IW_RETRY_MAX 0x0002 /* Value is a maximum */ -#define IW_RETRY_RELATIVE 0x0004 /* Value is not in seconds/ms/us */ -#define IW_RETRY_SHORT 0x0010 /* Value is for short packets */ -#define IW_RETRY_LONG 0x0020 /* Value is for long packets */ - -/* Scanning request flags */ -#define IW_SCAN_DEFAULT 0x0000 /* Default scan of the driver */ -#define IW_SCAN_ALL_ESSID 0x0001 /* Scan all ESSIDs */ -#define IW_SCAN_THIS_ESSID 0x0002 /* Scan only this ESSID */ -#define IW_SCAN_ALL_FREQ 0x0004 /* Scan all Frequencies */ -#define IW_SCAN_THIS_FREQ 0x0008 /* Scan only this Frequency */ -#define IW_SCAN_ALL_MODE 0x0010 /* Scan all Modes */ -#define IW_SCAN_THIS_MODE 0x0020 /* Scan only this Mode */ -#define IW_SCAN_ALL_RATE 0x0040 /* Scan all Bit-Rates */ -#define IW_SCAN_THIS_RATE 0x0080 /* Scan only this Bit-Rate */ -/* struct iw_scan_req scan_type */ -#define IW_SCAN_TYPE_ACTIVE 0 -#define IW_SCAN_TYPE_PASSIVE 1 -/* Maximum size of returned data */ -#define IW_SCAN_MAX_DATA 4096 /* In bytes */ - -/* Scan capability flags - in (struct iw_range *)->scan_capa */ -#define IW_SCAN_CAPA_NONE 0x00 -#define IW_SCAN_CAPA_ESSID 0x01 -#define IW_SCAN_CAPA_BSSID 0x02 -#define IW_SCAN_CAPA_CHANNEL 0x04 -#define IW_SCAN_CAPA_MODE 0x08 -#define IW_SCAN_CAPA_RATE 0x10 -#define IW_SCAN_CAPA_TYPE 0x20 -#define IW_SCAN_CAPA_TIME 0x40 - -/* Max number of char in custom event - use multiple of them if needed */ -#define IW_CUSTOM_MAX 256 /* In bytes */ - -/* Generic information element */ -#define IW_GENERIC_IE_MAX 1024 - -/* MLME requests (SIOCSIWMLME / struct iw_mlme) */ -#define IW_MLME_DEAUTH 0 -#define IW_MLME_DISASSOC 1 -#define IW_MLME_AUTH 2 -#define IW_MLME_ASSOC 3 - -/* SIOCSIWAUTH/SIOCGIWAUTH struct iw_param flags */ -#define IW_AUTH_INDEX 0x0FFF -#define IW_AUTH_FLAGS 0xF000 -/* SIOCSIWAUTH/SIOCGIWAUTH parameters (0 .. 4095) - * (IW_AUTH_INDEX mask in struct iw_param flags; this is the index of the - * parameter that is being set/get to; value will be read/written to - * struct iw_param value field) */ -#define IW_AUTH_WPA_VERSION 0 -#define IW_AUTH_CIPHER_PAIRWISE 1 -#define IW_AUTH_CIPHER_GROUP 2 -#define IW_AUTH_KEY_MGMT 3 -#define IW_AUTH_TKIP_COUNTERMEASURES 4 -#define IW_AUTH_DROP_UNENCRYPTED 5 -#define IW_AUTH_80211_AUTH_ALG 6 -#define IW_AUTH_WPA_ENABLED 7 -#define IW_AUTH_RX_UNENCRYPTED_EAPOL 8 -#define IW_AUTH_ROAMING_CONTROL 9 -#define IW_AUTH_PRIVACY_INVOKED 10 -#define IW_AUTH_CIPHER_GROUP_MGMT 11 -#define IW_AUTH_MFP 12 - -/* IW_AUTH_WPA_VERSION values (bit field) */ -#define IW_AUTH_WPA_VERSION_DISABLED 0x00000001 -#define IW_AUTH_WPA_VERSION_WPA 0x00000002 -#define IW_AUTH_WPA_VERSION_WPA2 0x00000004 - -/* IW_AUTH_PAIRWISE_CIPHER, IW_AUTH_GROUP_CIPHER, and IW_AUTH_CIPHER_GROUP_MGMT - * values (bit field) */ -#define IW_AUTH_CIPHER_NONE 0x00000001 -#define IW_AUTH_CIPHER_WEP40 0x00000002 -#define IW_AUTH_CIPHER_TKIP 0x00000004 -#define IW_AUTH_CIPHER_CCMP 0x00000008 -#define IW_AUTH_CIPHER_WEP104 0x00000010 -#define IW_AUTH_CIPHER_AES_CMAC 0x00000020 - -/* IW_AUTH_KEY_MGMT values (bit field) */ -#define IW_AUTH_KEY_MGMT_802_1X 1 -#define IW_AUTH_KEY_MGMT_PSK 2 - -/* IW_AUTH_80211_AUTH_ALG values (bit field) */ -#define IW_AUTH_ALG_OPEN_SYSTEM 0x00000001 -#define IW_AUTH_ALG_SHARED_KEY 0x00000002 -#define IW_AUTH_ALG_LEAP 0x00000004 - -/* IW_AUTH_ROAMING_CONTROL values */ -#define IW_AUTH_ROAMING_ENABLE 0 /* driver/firmware based roaming */ -#define IW_AUTH_ROAMING_DISABLE 1 /* user space program used for roaming - * control */ - -/* IW_AUTH_MFP (management frame protection) values */ -#define IW_AUTH_MFP_DISABLED 0 /* MFP disabled */ -#define IW_AUTH_MFP_OPTIONAL 1 /* MFP optional */ -#define IW_AUTH_MFP_REQUIRED 2 /* MFP required */ - -/* SIOCSIWENCODEEXT definitions */ -#define IW_ENCODE_SEQ_MAX_SIZE 8 -/* struct iw_encode_ext ->alg */ -#define IW_ENCODE_ALG_NONE 0 -#define IW_ENCODE_ALG_WEP 1 -#define IW_ENCODE_ALG_TKIP 2 -#define IW_ENCODE_ALG_CCMP 3 -#define IW_ENCODE_ALG_PMK 4 -#define IW_ENCODE_ALG_AES_CMAC 5 -/* struct iw_encode_ext ->ext_flags */ -#define IW_ENCODE_EXT_TX_SEQ_VALID 0x00000001 -#define IW_ENCODE_EXT_RX_SEQ_VALID 0x00000002 -#define IW_ENCODE_EXT_GROUP_KEY 0x00000004 -#define IW_ENCODE_EXT_SET_TX_KEY 0x00000008 - -/* IWEVMICHAELMICFAILURE : struct iw_michaelmicfailure ->flags */ -#define IW_MICFAILURE_KEY_ID 0x00000003 /* Key ID 0..3 */ -#define IW_MICFAILURE_GROUP 0x00000004 -#define IW_MICFAILURE_PAIRWISE 0x00000008 -#define IW_MICFAILURE_STAKEY 0x00000010 -#define IW_MICFAILURE_COUNT 0x00000060 /* 1 or 2 (0 = count not supported) - */ - -/* Bit field values for enc_capa in struct iw_range */ -#define IW_ENC_CAPA_WPA 0x00000001 -#define IW_ENC_CAPA_WPA2 0x00000002 -#define IW_ENC_CAPA_CIPHER_TKIP 0x00000004 -#define IW_ENC_CAPA_CIPHER_CCMP 0x00000008 -#define IW_ENC_CAPA_4WAY_HANDSHAKE 0x00000010 - -/* Event capability macros - in (struct iw_range *)->event_capa - * Because we have more than 32 possible events, we use an array of - * 32 bit bitmasks. Note : 32 bits = 0x20 = 2^5. */ -#define IW_EVENT_CAPA_BASE(cmd) ((cmd >= SIOCIWFIRSTPRIV) ? \ - (cmd - SIOCIWFIRSTPRIV + 0x60) : \ - (cmd - SIOCIWFIRST)) -#define IW_EVENT_CAPA_INDEX(cmd) (IW_EVENT_CAPA_BASE(cmd) >> 5) -#define IW_EVENT_CAPA_MASK(cmd) (1 << (IW_EVENT_CAPA_BASE(cmd) & 0x1F)) -/* Event capability constants - event autogenerated by the kernel - * This list is valid for most 802.11 devices, customise as needed... */ -#define IW_EVENT_CAPA_K_0 (IW_EVENT_CAPA_MASK(0x8B04) | \ - IW_EVENT_CAPA_MASK(0x8B06) | \ - IW_EVENT_CAPA_MASK(0x8B1A)) -#define IW_EVENT_CAPA_K_1 (IW_EVENT_CAPA_MASK(0x8B2A)) -/* "Easy" macro to set events in iw_range (less efficient) */ -#define IW_EVENT_CAPA_SET(event_capa, cmd) (event_capa[IW_EVENT_CAPA_INDEX(cmd)] |= IW_EVENT_CAPA_MASK(cmd)) -#define IW_EVENT_CAPA_SET_KERNEL(event_capa) {event_capa[0] |= IW_EVENT_CAPA_K_0; event_capa[1] |= IW_EVENT_CAPA_K_1; } - - -/****************************** TYPES ******************************/ - -/* --------------------------- SUBTYPES --------------------------- */ -/* - * Generic format for most parameters that fit in an int - */ -struct iw_param -{ - __s32 value; /* The value of the parameter itself */ - __u8 fixed; /* Hardware should not use auto select */ - __u8 disabled; /* Disable the feature */ - __u16 flags; /* Various specifc flags (if any) */ -}; - -/* - * For all data larger than 16 octets, we need to use a - * pointer to memory allocated in user space. - */ -struct iw_point -{ - void __user *pointer; /* Pointer to the data (in user space) */ - __u16 length; /* number of fields or size in bytes */ - __u16 flags; /* Optional params */ -}; +#include <uapi/linux/wireless.h> -#ifdef __KERNEL__ #ifdef CONFIG_COMPAT #include <linux/compat.h> @@ -700,432 +21,6 @@ struct compat_iw_point { __u16 flags; }; #endif -#endif - -/* - * A frequency - * For numbers lower than 10^9, we encode the number in 'm' and - * set 'e' to 0 - * For number greater than 10^9, we divide it by the lowest power - * of 10 to get 'm' lower than 10^9, with 'm'= f / (10^'e')... - * The power of 10 is in 'e', the result of the division is in 'm'. - */ -struct iw_freq -{ - __s32 m; /* Mantissa */ - __s16 e; /* Exponent */ - __u8 i; /* List index (when in range struct) */ - __u8 flags; /* Flags (fixed/auto) */ -}; - -/* - * Quality of the link - */ -struct iw_quality -{ - __u8 qual; /* link quality (%retries, SNR, - %missed beacons or better...) */ - __u8 level; /* signal level (dBm) */ - __u8 noise; /* noise level (dBm) */ - __u8 updated; /* Flags to know if updated */ -}; - -/* - * Packet discarded in the wireless adapter due to - * "wireless" specific problems... - * Note : the list of counter and statistics in net_device_stats - * is already pretty exhaustive, and you should use that first. - * This is only additional stats... - */ -struct iw_discarded -{ - __u32 nwid; /* Rx : Wrong nwid/essid */ - __u32 code; /* Rx : Unable to code/decode (WEP) */ - __u32 fragment; /* Rx : Can't perform MAC reassembly */ - __u32 retries; /* Tx : Max MAC retries num reached */ - __u32 misc; /* Others cases */ -}; - -/* - * Packet/Time period missed in the wireless adapter due to - * "wireless" specific problems... - */ -struct iw_missed -{ - __u32 beacon; /* Missed beacons/superframe */ -}; - -/* - * Quality range (for spy threshold) - */ -struct iw_thrspy -{ - struct sockaddr addr; /* Source address (hw/mac) */ - struct iw_quality qual; /* Quality of the link */ - struct iw_quality low; /* Low threshold */ - struct iw_quality high; /* High threshold */ -}; - -/* - * Optional data for scan request - * - * Note: these optional parameters are controlling parameters for the - * scanning behavior, these do not apply to getting scan results - * (SIOCGIWSCAN). Drivers are expected to keep a local BSS table and - * provide a merged results with all BSSes even if the previous scan - * request limited scanning to a subset, e.g., by specifying an SSID. - * Especially, scan results are required to include an entry for the - * current BSS if the driver is in Managed mode and associated with an AP. - */ -struct iw_scan_req -{ - __u8 scan_type; /* IW_SCAN_TYPE_{ACTIVE,PASSIVE} */ - __u8 essid_len; - __u8 num_channels; /* num entries in channel_list; - * 0 = scan all allowed channels */ - __u8 flags; /* reserved as padding; use zero, this may - * be used in the future for adding flags - * to request different scan behavior */ - struct sockaddr bssid; /* ff:ff:ff:ff:ff:ff for broadcast BSSID or - * individual address of a specific BSS */ - - /* - * Use this ESSID if IW_SCAN_THIS_ESSID flag is used instead of using - * the current ESSID. This allows scan requests for specific ESSID - * without having to change the current ESSID and potentially breaking - * the current association. - */ - __u8 essid[IW_ESSID_MAX_SIZE]; - - /* - * Optional parameters for changing the default scanning behavior. - * These are based on the MLME-SCAN.request from IEEE Std 802.11. - * TU is 1.024 ms. If these are set to 0, driver is expected to use - * reasonable default values. min_channel_time defines the time that - * will be used to wait for the first reply on each channel. If no - * replies are received, next channel will be scanned after this. If - * replies are received, total time waited on the channel is defined by - * max_channel_time. - */ - __u32 min_channel_time; /* in TU */ - __u32 max_channel_time; /* in TU */ - - struct iw_freq channel_list[IW_MAX_FREQUENCIES]; -}; - -/* ------------------------- WPA SUPPORT ------------------------- */ - -/* - * Extended data structure for get/set encoding (this is used with - * SIOCSIWENCODEEXT/SIOCGIWENCODEEXT. struct iw_point and IW_ENCODE_* - * flags are used in the same way as with SIOCSIWENCODE/SIOCGIWENCODE and - * only the data contents changes (key data -> this structure, including - * key data). - * - * If the new key is the first group key, it will be set as the default - * TX key. Otherwise, default TX key index is only changed if - * IW_ENCODE_EXT_SET_TX_KEY flag is set. - * - * Key will be changed with SIOCSIWENCODEEXT in all cases except for - * special "change TX key index" operation which is indicated by setting - * key_len = 0 and ext_flags |= IW_ENCODE_EXT_SET_TX_KEY. - * - * tx_seq/rx_seq are only used when respective - * IW_ENCODE_EXT_{TX,RX}_SEQ_VALID flag is set in ext_flags. Normal - * TKIP/CCMP operation is to set RX seq with SIOCSIWENCODEEXT and start - * TX seq from zero whenever key is changed. SIOCGIWENCODEEXT is normally - * used only by an Authenticator (AP or an IBSS station) to get the - * current TX sequence number. Using TX_SEQ_VALID for SIOCSIWENCODEEXT and - * RX_SEQ_VALID for SIOCGIWENCODEEXT are optional, but can be useful for - * debugging/testing. - */ -struct iw_encode_ext -{ - __u32 ext_flags; /* IW_ENCODE_EXT_* */ - __u8 tx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */ - __u8 rx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */ - struct sockaddr addr; /* ff:ff:ff:ff:ff:ff for broadcast/multicast - * (group) keys or unicast address for - * individual keys */ - __u16 alg; /* IW_ENCODE_ALG_* */ - __u16 key_len; - __u8 key[0]; -}; - -/* SIOCSIWMLME data */ -struct iw_mlme -{ - __u16 cmd; /* IW_MLME_* */ - __u16 reason_code; - struct sockaddr addr; -}; - -/* SIOCSIWPMKSA data */ -#define IW_PMKSA_ADD 1 -#define IW_PMKSA_REMOVE 2 -#define IW_PMKSA_FLUSH 3 - -#define IW_PMKID_LEN 16 - -struct iw_pmksa -{ - __u32 cmd; /* IW_PMKSA_* */ - struct sockaddr bssid; - __u8 pmkid[IW_PMKID_LEN]; -}; - -/* IWEVMICHAELMICFAILURE data */ -struct iw_michaelmicfailure -{ - __u32 flags; - struct sockaddr src_addr; - __u8 tsc[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */ -}; - -/* IWEVPMKIDCAND data */ -#define IW_PMKID_CAND_PREAUTH 0x00000001 /* RNS pre-authentication enabled */ -struct iw_pmkid_cand -{ - __u32 flags; /* IW_PMKID_CAND_* */ - __u32 index; /* the smaller the index, the higher the - * priority */ - struct sockaddr bssid; -}; - -/* ------------------------ WIRELESS STATS ------------------------ */ -/* - * Wireless statistics (used for /proc/net/wireless) - */ -struct iw_statistics -{ - __u16 status; /* Status - * - device dependent for now */ - - struct iw_quality qual; /* Quality of the link - * (instant/mean/max) */ - struct iw_discarded discard; /* Packet discarded counts */ - struct iw_missed miss; /* Packet missed counts */ -}; - -/* ------------------------ IOCTL REQUEST ------------------------ */ -/* - * This structure defines the payload of an ioctl, and is used - * below. - * - * Note that this structure should fit on the memory footprint - * of iwreq (which is the same as ifreq), which mean a max size of - * 16 octets = 128 bits. Warning, pointers might be 64 bits wide... - * You should check this when increasing the structures defined - * above in this file... - */ -union iwreq_data -{ - /* Config - generic */ - char name[IFNAMSIZ]; - /* Name : used to verify the presence of wireless extensions. - * Name of the protocol/provider... */ - - struct iw_point essid; /* Extended network name */ - struct iw_param nwid; /* network id (or domain - the cell) */ - struct iw_freq freq; /* frequency or channel : - * 0-1000 = channel - * > 1000 = frequency in Hz */ - - struct iw_param sens; /* signal level threshold */ - struct iw_param bitrate; /* default bit rate */ - struct iw_param txpower; /* default transmit power */ - struct iw_param rts; /* RTS threshold threshold */ - struct iw_param frag; /* Fragmentation threshold */ - __u32 mode; /* Operation mode */ - struct iw_param retry; /* Retry limits & lifetime */ - - struct iw_point encoding; /* Encoding stuff : tokens */ - struct iw_param power; /* PM duration/timeout */ - struct iw_quality qual; /* Quality part of statistics */ - - struct sockaddr ap_addr; /* Access point address */ - struct sockaddr addr; /* Destination address (hw/mac) */ - - struct iw_param param; /* Other small parameters */ - struct iw_point data; /* Other large parameters */ -}; - -/* - * The structure to exchange data for ioctl. - * This structure is the same as 'struct ifreq', but (re)defined for - * convenience... - * Do I need to remind you about structure size (32 octets) ? - */ -struct iwreq -{ - union - { - char ifrn_name[IFNAMSIZ]; /* if name, e.g. "eth0" */ - } ifr_ifrn; - - /* Data part (defined just above) */ - union iwreq_data u; -}; - -/* -------------------------- IOCTL DATA -------------------------- */ -/* - * For those ioctl which want to exchange mode data that what could - * fit in the above structure... - */ - -/* - * Range of parameters - */ - -struct iw_range -{ - /* Informative stuff (to choose between different interface) */ - __u32 throughput; /* To give an idea... */ - /* In theory this value should be the maximum benchmarked - * TCP/IP throughput, because with most of these devices the - * bit rate is meaningless (overhead an co) to estimate how - * fast the connection will go and pick the fastest one. - * I suggest people to play with Netperf or any benchmark... - */ - - /* NWID (or domain id) */ - __u32 min_nwid; /* Minimal NWID we are able to set */ - __u32 max_nwid; /* Maximal NWID we are able to set */ - - /* Old Frequency (backward compat - moved lower ) */ - __u16 old_num_channels; - __u8 old_num_frequency; - - /* Scan capabilities */ - __u8 scan_capa; /* IW_SCAN_CAPA_* bit field */ - - /* Wireless event capability bitmasks */ - __u32 event_capa[6]; - - /* signal level threshold range */ - __s32 sensitivity; - - /* Quality of link & SNR stuff */ - /* Quality range (link, level, noise) - * If the quality is absolute, it will be in the range [0 ; max_qual], - * if the quality is dBm, it will be in the range [max_qual ; 0]. - * Don't forget that we use 8 bit arithmetics... */ - struct iw_quality max_qual; /* Quality of the link */ - /* This should contain the average/typical values of the quality - * indicator. This should be the threshold between a "good" and - * a "bad" link (example : monitor going from green to orange). - * Currently, user space apps like quality monitors don't have any - * way to calibrate the measurement. With this, they can split - * the range between 0 and max_qual in different quality level - * (using a geometric subdivision centered on the average). - * I expect that people doing the user space apps will feedback - * us on which value we need to put in each driver... */ - struct iw_quality avg_qual; /* Quality of the link */ - - /* Rates */ - __u8 num_bitrates; /* Number of entries in the list */ - __s32 bitrate[IW_MAX_BITRATES]; /* list, in bps */ - - /* RTS threshold */ - __s32 min_rts; /* Minimal RTS threshold */ - __s32 max_rts; /* Maximal RTS threshold */ - - /* Frag threshold */ - __s32 min_frag; /* Minimal frag threshold */ - __s32 max_frag; /* Maximal frag threshold */ - - /* Power Management duration & timeout */ - __s32 min_pmp; /* Minimal PM period */ - __s32 max_pmp; /* Maximal PM period */ - __s32 min_pmt; /* Minimal PM timeout */ - __s32 max_pmt; /* Maximal PM timeout */ - __u16 pmp_flags; /* How to decode max/min PM period */ - __u16 pmt_flags; /* How to decode max/min PM timeout */ - __u16 pm_capa; /* What PM options are supported */ - - /* Encoder stuff */ - __u16 encoding_size[IW_MAX_ENCODING_SIZES]; /* Different token sizes */ - __u8 num_encoding_sizes; /* Number of entry in the list */ - __u8 max_encoding_tokens; /* Max number of tokens */ - /* For drivers that need a "login/passwd" form */ - __u8 encoding_login_index; /* token index for login token */ - - /* Transmit power */ - __u16 txpower_capa; /* What options are supported */ - __u8 num_txpower; /* Number of entries in the list */ - __s32 txpower[IW_MAX_TXPOWER]; /* list, in bps */ - - /* Wireless Extension version info */ - __u8 we_version_compiled; /* Must be WIRELESS_EXT */ - __u8 we_version_source; /* Last update of source */ - - /* Retry limits and lifetime */ - __u16 retry_capa; /* What retry options are supported */ - __u16 retry_flags; /* How to decode max/min retry limit */ - __u16 r_time_flags; /* How to decode max/min retry life */ - __s32 min_retry; /* Minimal number of retries */ - __s32 max_retry; /* Maximal number of retries */ - __s32 min_r_time; /* Minimal retry lifetime */ - __s32 max_r_time; /* Maximal retry lifetime */ - - /* Frequency */ - __u16 num_channels; /* Number of channels [0; num - 1] */ - __u8 num_frequency; /* Number of entry in the list */ - struct iw_freq freq[IW_MAX_FREQUENCIES]; /* list */ - /* Note : this frequency list doesn't need to fit channel numbers, - * because each entry contain its channel index */ - - __u32 enc_capa; /* IW_ENC_CAPA_* bit field */ -}; - -/* - * Private ioctl interface information - */ - -struct iw_priv_args -{ - __u32 cmd; /* Number of the ioctl to issue */ - __u16 set_args; /* Type and number of args */ - __u16 get_args; /* Type and number of args */ - char name[IFNAMSIZ]; /* Name of the extension */ -}; - -/* ----------------------- WIRELESS EVENTS ----------------------- */ -/* - * Wireless events are carried through the rtnetlink socket to user - * space. They are encapsulated in the IFLA_WIRELESS field of - * a RTM_NEWLINK message. - */ - -/* - * A Wireless Event. Contains basically the same data as the ioctl... - */ -struct iw_event -{ - __u16 len; /* Real length of this stuff */ - __u16 cmd; /* Wireless IOCTL */ - union iwreq_data u; /* IOCTL fixed payload */ -}; - -/* Size of the Event prefix (including padding and alignement junk) */ -#define IW_EV_LCP_LEN (sizeof(struct iw_event) - sizeof(union iwreq_data)) -/* Size of the various events */ -#define IW_EV_CHAR_LEN (IW_EV_LCP_LEN + IFNAMSIZ) -#define IW_EV_UINT_LEN (IW_EV_LCP_LEN + sizeof(__u32)) -#define IW_EV_FREQ_LEN (IW_EV_LCP_LEN + sizeof(struct iw_freq)) -#define IW_EV_PARAM_LEN (IW_EV_LCP_LEN + sizeof(struct iw_param)) -#define IW_EV_ADDR_LEN (IW_EV_LCP_LEN + sizeof(struct sockaddr)) -#define IW_EV_QUAL_LEN (IW_EV_LCP_LEN + sizeof(struct iw_quality)) - -/* iw_point events are special. First, the payload (extra data) come at - * the end of the event, so they are bigger than IW_EV_POINT_LEN. Second, - * we omit the pointer, so start at an offset. */ -#define IW_EV_POINT_OFF (((char *) &(((struct iw_point *) NULL)->length)) - \ - (char *) NULL) -#define IW_EV_POINT_LEN (IW_EV_LCP_LEN + sizeof(struct iw_point) - \ - IW_EV_POINT_OFF) - -#ifdef __KERNEL__ #ifdef CONFIG_COMPAT struct __compat_iw_event { __u16 len; /* Real length of this stuff */ @@ -1146,17 +41,4 @@ struct __compat_iw_event { (IW_EV_COMPAT_LCP_LEN + sizeof(struct compat_iw_point) - \ IW_EV_COMPAT_POINT_OFF) #endif -#endif - -/* Size of the Event prefix when packed in stream */ -#define IW_EV_LCP_PK_LEN (4) -/* Size of the various events when packed in stream */ -#define IW_EV_CHAR_PK_LEN (IW_EV_LCP_PK_LEN + IFNAMSIZ) -#define IW_EV_UINT_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(__u32)) -#define IW_EV_FREQ_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_freq)) -#define IW_EV_PARAM_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_param)) -#define IW_EV_ADDR_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct sockaddr)) -#define IW_EV_QUAL_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_quality)) -#define IW_EV_POINT_PK_LEN (IW_EV_LCP_PK_LEN + 4) - #endif /* _LINUX_WIRELESS_H */ diff --git a/include/linux/xattr.h b/include/linux/xattr.h index cc13e111597..fdbafc6841c 100644 --- a/include/linux/xattr.h +++ b/include/linux/xattr.h @@ -10,61 +10,11 @@ #ifndef _LINUX_XATTR_H #define _LINUX_XATTR_H -#define XATTR_CREATE 0x1 /* set value, fail if attr already exists */ -#define XATTR_REPLACE 0x2 /* set value, fail if attr does not exist */ - -/* Namespaces */ -#define XATTR_OS2_PREFIX "os2." -#define XATTR_OS2_PREFIX_LEN (sizeof (XATTR_OS2_PREFIX) - 1) - -#define XATTR_SECURITY_PREFIX "security." -#define XATTR_SECURITY_PREFIX_LEN (sizeof (XATTR_SECURITY_PREFIX) - 1) - -#define XATTR_SYSTEM_PREFIX "system." -#define XATTR_SYSTEM_PREFIX_LEN (sizeof (XATTR_SYSTEM_PREFIX) - 1) - -#define XATTR_TRUSTED_PREFIX "trusted." -#define XATTR_TRUSTED_PREFIX_LEN (sizeof (XATTR_TRUSTED_PREFIX) - 1) - -#define XATTR_USER_PREFIX "user." -#define XATTR_USER_PREFIX_LEN (sizeof (XATTR_USER_PREFIX) - 1) - -/* Security namespace */ -#define XATTR_EVM_SUFFIX "evm" -#define XATTR_NAME_EVM XATTR_SECURITY_PREFIX XATTR_EVM_SUFFIX - -#define XATTR_IMA_SUFFIX "ima" -#define XATTR_NAME_IMA XATTR_SECURITY_PREFIX XATTR_IMA_SUFFIX - -#define XATTR_SELINUX_SUFFIX "selinux" -#define XATTR_NAME_SELINUX XATTR_SECURITY_PREFIX XATTR_SELINUX_SUFFIX - -#define XATTR_SMACK_SUFFIX "SMACK64" -#define XATTR_SMACK_IPIN "SMACK64IPIN" -#define XATTR_SMACK_IPOUT "SMACK64IPOUT" -#define XATTR_SMACK_EXEC "SMACK64EXEC" -#define XATTR_SMACK_TRANSMUTE "SMACK64TRANSMUTE" -#define XATTR_SMACK_MMAP "SMACK64MMAP" -#define XATTR_NAME_SMACK XATTR_SECURITY_PREFIX XATTR_SMACK_SUFFIX -#define XATTR_NAME_SMACKIPIN XATTR_SECURITY_PREFIX XATTR_SMACK_IPIN -#define XATTR_NAME_SMACKIPOUT XATTR_SECURITY_PREFIX XATTR_SMACK_IPOUT -#define XATTR_NAME_SMACKEXEC XATTR_SECURITY_PREFIX XATTR_SMACK_EXEC -#define XATTR_NAME_SMACKTRANSMUTE XATTR_SECURITY_PREFIX XATTR_SMACK_TRANSMUTE -#define XATTR_NAME_SMACKMMAP XATTR_SECURITY_PREFIX XATTR_SMACK_MMAP - -#define XATTR_CAPS_SUFFIX "capability" -#define XATTR_NAME_CAPS XATTR_SECURITY_PREFIX XATTR_CAPS_SUFFIX - -#define XATTR_POSIX_ACL_ACCESS "posix_acl_access" -#define XATTR_NAME_POSIX_ACL_ACCESS XATTR_SYSTEM_PREFIX XATTR_POSIX_ACL_ACCESS -#define XATTR_POSIX_ACL_DEFAULT "posix_acl_default" -#define XATTR_NAME_POSIX_ACL_DEFAULT XATTR_SYSTEM_PREFIX XATTR_POSIX_ACL_DEFAULT - -#ifdef __KERNEL__ #include <linux/slab.h> #include <linux/types.h> #include <linux/spinlock.h> +#include <uapi/linux/xattr.h> struct inode; struct dentry; @@ -147,6 +97,4 @@ ssize_t simple_xattr_list(struct simple_xattrs *xattrs, char *buffer, void simple_xattr_list_add(struct simple_xattrs *xattrs, struct simple_xattr *new_xattr); -#endif /* __KERNEL__ */ - #endif /* _LINUX_XATTR_H */ diff --git a/include/media/davinci/vpbe.h b/include/media/davinci/vpbe.h index 8bc1b3c0e67..a7ca4884c46 100644 --- a/include/media/davinci/vpbe.h +++ b/include/media/davinci/vpbe.h @@ -35,7 +35,7 @@ struct osd_config_info { struct vpbe_output { struct v4l2_output output; /* - * If output capabilities include dv_preset, list supported presets + * If output capabilities include dv_timings, list supported timings * below */ char *subdev_name; @@ -120,16 +120,16 @@ struct vpbe_device_ops { unsigned int (*get_output)(struct vpbe_device *vpbe_dev); /* Set DV preset at current output */ - int (*s_dv_preset)(struct vpbe_device *vpbe_dev, - struct v4l2_dv_preset *dv_preset); + int (*s_dv_timings)(struct vpbe_device *vpbe_dev, + struct v4l2_dv_timings *dv_timings); /* Get DV presets supported at the output */ - int (*g_dv_preset)(struct vpbe_device *vpbe_dev, - struct v4l2_dv_preset *dv_preset); + int (*g_dv_timings)(struct vpbe_device *vpbe_dev, + struct v4l2_dv_timings *dv_timings); /* Enumerate the DV Presets supported at the output */ - int (*enum_dv_presets)(struct vpbe_device *vpbe_dev, - struct v4l2_dv_enum_preset *preset_info); + int (*enum_dv_timings)(struct vpbe_device *vpbe_dev, + struct v4l2_enum_dv_timings *timings_info); /* Set std at the output */ int (*s_std)(struct vpbe_device *vpbe_dev, v4l2_std_id *std_id); diff --git a/include/media/davinci/vpbe_types.h b/include/media/davinci/vpbe_types.h index 727f55170e4..9b85396514b 100644 --- a/include/media/davinci/vpbe_types.h +++ b/include/media/davinci/vpbe_types.h @@ -32,11 +32,6 @@ enum vpbe_enc_timings_type { VPBE_ENC_TIMINGS_INVALID = 0x8, }; -union vpbe_timings { - v4l2_std_id std_id; - unsigned int dv_preset; -}; - /* * struct vpbe_enc_mode_info * @name: ptr to name string of the standard, "NTSC", "PAL" etc @@ -73,7 +68,8 @@ union vpbe_timings { struct vpbe_enc_mode_info { unsigned char *name; enum vpbe_enc_timings_type timings_type; - union vpbe_timings timings; + v4l2_std_id std_id; + struct v4l2_dv_timings dv_timings; unsigned int interlaced; unsigned int xres; unsigned int yres; diff --git a/include/media/davinci/vpbe_venc.h b/include/media/davinci/vpbe_venc.h index 6b57334f402..cc78c2eb16d 100644 --- a/include/media/davinci/vpbe_venc.h +++ b/include/media/davinci/vpbe_venc.h @@ -32,7 +32,7 @@ struct venc_platform_data { int (*setup_pinmux)(enum v4l2_mbus_pixelcode if_type, int field); int (*setup_clock)(enum vpbe_enc_timings_type type, - unsigned int mode); + unsigned int pixclock); int (*setup_if_config)(enum v4l2_mbus_pixelcode pixcode); /* Number of LCD outputs supported */ int num_lcd_outputs; diff --git a/include/media/davinci/vpif_types.h b/include/media/davinci/vpif_types.h index d8f6ab1943e..3882e0675cc 100644 --- a/include/media/davinci/vpif_types.h +++ b/include/media/davinci/vpif_types.h @@ -20,6 +20,7 @@ #include <linux/i2c.h> #define VPIF_CAPTURE_MAX_CHANNELS 2 +#define VPIF_DISPLAY_MAX_CHANNELS 2 enum vpif_if_type { VPIF_IF_BT656, @@ -37,29 +38,38 @@ struct vpif_interface { struct vpif_subdev_info { const char *name; struct i2c_board_info board_info; - u32 input; - u32 output; - unsigned can_route:1; - struct vpif_interface vpif_if; +}; + +struct vpif_output { + struct v4l2_output output; + const char *subdev_name; + u32 input_route; + u32 output_route; +}; + +struct vpif_display_chan_config { + const struct vpif_output *outputs; + int output_count; + bool clip_en; }; struct vpif_display_config { int (*set_clock)(int, int); struct vpif_subdev_info *subdevinfo; int subdev_count; - const char **output; - int output_count; + struct vpif_display_chan_config chan_config[VPIF_DISPLAY_MAX_CHANNELS]; const char *card_name; - bool ch2_clip_en; - bool ch3_clip_en; }; struct vpif_input { struct v4l2_input input; const char *subdev_name; + u32 input_route; + u32 output_route; }; struct vpif_capture_chan_config { + struct vpif_interface vpif_if; const struct vpif_input *inputs; int input_count; }; diff --git a/include/media/s5p_fimc.h b/include/media/s5p_fimc.h index 09421a611d7..eaea62a382f 100644 --- a/include/media/s5p_fimc.h +++ b/include/media/s5p_fimc.h @@ -30,7 +30,6 @@ struct i2c_board_info; * @board_info: pointer to I2C subdevice's board info * @clk_frequency: frequency of the clock the host interface provides to sensor * @bus_type: determines bus type, MIPI, ITU-R BT.601 etc. - * @csi_data_align: MIPI-CSI interface data alignment in bits * @i2c_bus_num: i2c control bus id the sensor is attached to * @mux_id: FIMC camera interface multiplexer index (separate for MIPI and ITU) * @clk_id: index of the SoC peripheral clock for sensors @@ -40,7 +39,6 @@ struct s5p_fimc_isp_info { struct i2c_board_info *board_info; unsigned long clk_frequency; enum cam_bus_type bus_type; - u16 csi_data_align; u16 i2c_bus_num; u16 mux_id; u16 flags; diff --git a/include/media/v4l2-ctrls.h b/include/media/v4l2-ctrls.h index 801adb466bd..96509119f28 100644 --- a/include/media/v4l2-ctrls.h +++ b/include/media/v4l2-ctrls.h @@ -351,6 +351,29 @@ struct v4l2_ctrl *v4l2_ctrl_new_std_menu(struct v4l2_ctrl_handler *hdl, const struct v4l2_ctrl_ops *ops, u32 id, s32 max, s32 mask, s32 def); +/** v4l2_ctrl_new_std_menu_items() - Create a new standard V4L2 menu control + * with driver specific menu. + * @hdl: The control handler. + * @ops: The control ops. + * @id: The control ID. + * @max: The control's maximum value. + * @mask: The control's skip mask for menu controls. This makes it + * easy to skip menu items that are not valid. If bit X is set, + * then menu item X is skipped. Of course, this only works for + * menus with <= 32 menu items. There are no menus that come + * close to that number, so this is OK. Should we ever need more, + * then this will have to be extended to a u64 or a bit array. + * @def: The control's default value. + * @qmenu: The new menu. + * + * Same as v4l2_ctrl_new_std_menu(), but @qmenu will be the driver specific + * menu of this control. + * + */ +struct v4l2_ctrl *v4l2_ctrl_new_std_menu_items(struct v4l2_ctrl_handler *hdl, + const struct v4l2_ctrl_ops *ops, u32 id, s32 max, + s32 mask, s32 def, const char * const *qmenu); + /** v4l2_ctrl_new_int_menu() - Create a new standard V4L2 integer menu control. * @hdl: The control handler. * @ops: The control ops. diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h index 2ecd7377153..b137a5e1151 100644 --- a/include/media/v4l2-subdev.h +++ b/include/media/v4l2-subdev.h @@ -21,6 +21,7 @@ #ifndef _V4L2_SUBDEV_H #define _V4L2_SUBDEV_H +#include <linux/types.h> #include <linux/v4l2-subdev.h> #include <media/media-entity.h> #include <media/v4l2-common.h> @@ -45,6 +46,7 @@ struct v4l2_fh; struct v4l2_subdev; struct v4l2_subdev_fh; struct tuner_setup; +struct v4l2_mbus_frame_desc; /* decode_vbi_line */ struct v4l2_decode_vbi_line { @@ -226,6 +228,36 @@ struct v4l2_subdev_audio_ops { int (*s_stream)(struct v4l2_subdev *sd, int enable); }; +/* Indicates the @length field specifies maximum data length. */ +#define V4L2_MBUS_FRAME_DESC_FL_LEN_MAX (1U << 0) +/* Indicates user defined data format, i.e. non standard frame format. */ +#define V4L2_MBUS_FRAME_DESC_FL_BLOB (1U << 1) + +/** + * struct v4l2_mbus_frame_desc_entry - media bus frame description structure + * @flags: V4L2_MBUS_FRAME_DESC_FL_* flags + * @pixelcode: media bus pixel code, valid if FRAME_DESC_FL_BLOB is not set + * @length: number of octets per frame, valid for compressed or unspecified + * formats + */ +struct v4l2_mbus_frame_desc_entry { + u16 flags; + u32 pixelcode; + u32 length; +}; + +#define V4L2_FRAME_DESC_ENTRY_MAX 4 + +/** + * struct v4l2_mbus_frame_desc - media bus data frame description + * @entry: frame descriptors array + * @num_entries: number of entries in @entry array + */ +struct v4l2_mbus_frame_desc { + struct v4l2_mbus_frame_desc_entry entry[V4L2_FRAME_DESC_ENTRY_MAX]; + unsigned short num_entries; +}; + /* s_std_output: set v4l2_std_id for video OUTPUT devices. This is ignored by video input devices. @@ -274,6 +306,10 @@ struct v4l2_subdev_audio_ops { s_mbus_config: set a certain mediabus configuration. This operation is added for compatibility with soc-camera drivers and should not be used by new software. + + s_rx_buffer: set a host allocated memory buffer for the subdev. The subdev + can adjust @size to a lower value and must not write more data to the + buffer starting at @data than the original value of @size. */ struct v4l2_subdev_video_ops { int (*s_routing)(struct v4l2_subdev *sd, u32 input, u32 output, u32 config); @@ -327,6 +363,8 @@ struct v4l2_subdev_video_ops { struct v4l2_mbus_config *cfg); int (*s_mbus_config)(struct v4l2_subdev *sd, const struct v4l2_mbus_config *cfg); + int (*s_rx_buffer)(struct v4l2_subdev *sd, void *buf, + unsigned int *size); }; /* @@ -455,6 +493,12 @@ struct v4l2_subdev_ir_ops { struct v4l2_subdev_ir_parameters *params); }; +/** + * struct v4l2_subdev_pad_ops - v4l2-subdev pad level operations + * @get_frame_desc: get the current low level media bus frame parameters. + * @get_frame_desc: set the low level media bus frame parameters, @fd array + * may be adjusted by the subdev driver to device capabilities. + */ struct v4l2_subdev_pad_ops { int (*enum_mbus_code)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, struct v4l2_subdev_mbus_code_enum *code); @@ -483,6 +527,10 @@ struct v4l2_subdev_pad_ops { struct v4l2_subdev_format *source_fmt, struct v4l2_subdev_format *sink_fmt); #endif /* CONFIG_MEDIA_CONTROLLER */ + int (*get_frame_desc)(struct v4l2_subdev *sd, unsigned int pad, + struct v4l2_mbus_frame_desc *fd); + int (*set_frame_desc)(struct v4l2_subdev *sd, unsigned int pad, + struct v4l2_mbus_frame_desc *fd); }; struct v4l2_subdev_ops { diff --git a/include/scsi/fc/fc_fcp.h b/include/scsi/fc/fc_fcp.h index 0d7d67e96d4..9c8702942b6 100644 --- a/include/scsi/fc/fc_fcp.h +++ b/include/scsi/fc/fc_fcp.h @@ -127,6 +127,9 @@ struct fcp_txrdy { * * All response frames will always contain the fcp_resp template. Some * will also include the fcp_resp_len template. + * + * From Table 23, the FCP_RSP_INFO can either be 4 bytes or 8 bytes, both + * are valid length. */ struct fcp_resp { __u8 _fr_resvd[8]; /* reserved */ @@ -156,6 +159,9 @@ struct fcp_resp_rsp_info { __u8 _fr_resvd2[4]; /* reserved */ }; +#define FCP_RESP_RSP_INFO_LEN4 4 /* without reserved field */ +#define FCP_RESP_RSP_INFO_LEN8 8 /* with reserved field */ + struct fcp_resp_with_ext { struct fcp_resp resp; struct fcp_resp_ext ext; diff --git a/include/scsi/libfcoe.h b/include/scsi/libfcoe.h index 22b07cc9980..8742d853a3b 100644 --- a/include/scsi/libfcoe.h +++ b/include/scsi/libfcoe.h @@ -327,7 +327,6 @@ struct fcoe_percpu_s { * @lport: The associated local port * @fcoe_pending_queue: The pending Rx queue of skbs * @fcoe_pending_queue_active: Indicates if the pending queue is active - * @priority: Packet priority (DCB) * @max_queue_depth: Max queue depth of pending queue * @min_queue_depth: Min queue depth of pending queue * @timer: The queue timer @@ -343,7 +342,6 @@ struct fcoe_port { struct fc_lport *lport; struct sk_buff_head fcoe_pending_queue; u8 fcoe_pending_queue_active; - u8 priority; u32 max_queue_depth; u32 min_queue_depth; struct timer_list timer; diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h index ac06cc59589..de5f5d8f1f8 100644 --- a/include/scsi/scsi_cmnd.h +++ b/include/scsi/scsi_cmnd.h @@ -132,18 +132,10 @@ struct scsi_cmnd { unsigned char tag; /* SCSI-II queued command tag */ }; +/* make sure not to use it with REQ_TYPE_BLOCK_PC commands */ static inline struct scsi_driver *scsi_cmd_to_driver(struct scsi_cmnd *cmd) { - struct scsi_driver **sdp; - - if (!cmd->request->rq_disk) - return NULL; - - sdp = (struct scsi_driver **)cmd->request->rq_disk->private_data; - if (!sdp) - return NULL; - - return *sdp; + return *(struct scsi_driver **)cmd->request->rq_disk->private_data; } extern struct scsi_cmnd *scsi_get_command(struct scsi_device *, gfp_t); diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild index b0fd4d03499..e194387ef78 100644 --- a/include/uapi/linux/Kbuild +++ b/include/uapi/linux/Kbuild @@ -22,3 +22,396 @@ header-y += usb/ header-y += wimax/ genhdr-y += version.h + +ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/a.out.h \ + $(srctree)/arch/$(SRCARCH)/include/asm/a.out.h),) +header-y += a.out.h +endif + +header-y += acct.h +header-y += adb.h +header-y += adfs_fs.h +header-y += affs_hardblocks.h +header-y += agpgart.h +header-y += aio_abi.h +header-y += apm_bios.h +header-y += arcfb.h +header-y += atalk.h +header-y += atm.h +header-y += atm_eni.h +header-y += atm_he.h +header-y += atm_idt77105.h +header-y += atm_nicstar.h +header-y += atm_tcp.h +header-y += atm_zatm.h +header-y += atmapi.h +header-y += atmarp.h +header-y += atmbr2684.h +header-y += atmclip.h +header-y += atmdev.h +header-y += atmioc.h +header-y += atmlec.h +header-y += atmmpc.h +header-y += atmppp.h +header-y += atmsap.h +header-y += atmsvc.h +header-y += audit.h +header-y += auto_fs.h +header-y += auto_fs4.h +header-y += auxvec.h +header-y += ax25.h +header-y += b1lli.h +header-y += baycom.h +header-y += bfs_fs.h +header-y += binfmts.h +header-y += blkpg.h +header-y += blktrace_api.h +header-y += bpqether.h +header-y += bsg.h +header-y += can.h +header-y += capability.h +header-y += capi.h +header-y += cciss_defs.h +header-y += cciss_ioctl.h +header-y += cdrom.h +header-y += cgroupstats.h +header-y += chio.h +header-y += cm4000_cs.h +header-y += cn_proc.h +header-y += coda.h +header-y += coda_psdev.h +header-y += coff.h +header-y += connector.h +header-y += const.h +header-y += cramfs_fs.h +header-y += cuda.h +header-y += cyclades.h +header-y += cycx_cfm.h +header-y += dcbnl.h +header-y += dccp.h +header-y += dlm.h +header-y += dlm_device.h +header-y += dlm_netlink.h +header-y += dlm_plock.h +header-y += dlmconstants.h +header-y += dm-ioctl.h +header-y += dm-log-userspace.h +header-y += dn.h +header-y += dqblk_xfs.h +header-y += edd.h +header-y += efs_fs_sb.h +header-y += elf-em.h +header-y += elf-fdpic.h +header-y += elf.h +header-y += elfcore.h +header-y += errno.h +header-y += errqueue.h +header-y += ethtool.h +header-y += eventpoll.h +header-y += fadvise.h +header-y += falloc.h +header-y += fanotify.h +header-y += fb.h +header-y += fcntl.h +header-y += fd.h +header-y += fdreg.h +header-y += fib_rules.h +header-y += fiemap.h +header-y += filter.h +header-y += firewire-cdev.h +header-y += firewire-constants.h +header-y += flat.h +header-y += fs.h +header-y += fsl_hypervisor.h +header-y += fuse.h +header-y += futex.h +header-y += gameport.h +header-y += gen_stats.h +header-y += genetlink.h +header-y += gfs2_ondisk.h +header-y += gigaset_dev.h +header-y += hdlc.h +header-y += hdlcdrv.h +header-y += hdreg.h +header-y += hid.h +header-y += hiddev.h +header-y += hidraw.h +header-y += hpet.h +header-y += hysdn_if.h +header-y += i2c-dev.h +header-y += i2c.h +header-y += i2o-dev.h +header-y += i8k.h +header-y += icmp.h +header-y += icmpv6.h +header-y += if.h +header-y += if_addr.h +header-y += if_addrlabel.h +header-y += if_alg.h +header-y += if_arcnet.h +header-y += if_arp.h +header-y += if_bonding.h +header-y += if_bridge.h +header-y += if_cablemodem.h +header-y += if_eql.h +header-y += if_ether.h +header-y += if_fc.h +header-y += if_fddi.h +header-y += if_frad.h +header-y += if_hippi.h +header-y += if_infiniband.h +header-y += if_link.h +header-y += if_ltalk.h +header-y += if_packet.h +header-y += if_phonet.h +header-y += if_plip.h +header-y += if_ppp.h +header-y += if_pppol2tp.h +header-y += if_pppox.h +header-y += if_slip.h +header-y += if_team.h +header-y += if_tun.h +header-y += if_tunnel.h +header-y += if_vlan.h +header-y += if_x25.h +header-y += igmp.h +header-y += in.h +header-y += in6.h +header-y += in_route.h +header-y += inet_diag.h +header-y += inotify.h +header-y += input.h +header-y += ioctl.h +header-y += ip.h +header-y += ip6_tunnel.h +header-y += ip_vs.h +header-y += ipc.h +header-y += ipmi.h +header-y += ipmi_msgdefs.h +header-y += ipsec.h +header-y += ipv6.h +header-y += ipv6_route.h +header-y += ipx.h +header-y += irda.h +header-y += irqnr.h +header-y += isdn.h +header-y += isdn_divertif.h +header-y += isdn_ppp.h +header-y += isdnif.h +header-y += iso_fs.h +header-y += ivtv.h +header-y += ivtvfb.h +header-y += ixjuser.h +header-y += jffs2.h +header-y += joystick.h +header-y += kd.h +header-y += kdev_t.h +header-y += kernel-page-flags.h +header-y += kernel.h +header-y += kernelcapi.h +header-y += kexec.h +header-y += keyboard.h +header-y += keyctl.h + +ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm.h \ + $(srctree)/arch/$(SRCARCH)/include/asm/kvm.h),) +header-y += kvm.h +endif + + +ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm_para.h \ + $(srctree)/arch/$(SRCARCH)/include/asm/kvm_para.h),) +header-y += kvm_para.h +endif + +header-y += l2tp.h +header-y += limits.h +header-y += llc.h +header-y += loop.h +header-y += lp.h +header-y += magic.h +header-y += major.h +header-y += map_to_7segment.h +header-y += matroxfb.h +header-y += mdio.h +header-y += media.h +header-y += mei.h +header-y += mempolicy.h +header-y += meye.h +header-y += mii.h +header-y += minix_fs.h +header-y += mman.h +header-y += mmtimer.h +header-y += mqueue.h +header-y += mroute.h +header-y += mroute6.h +header-y += msdos_fs.h +header-y += msg.h +header-y += mtio.h +header-y += n_r3964.h +header-y += nbd.h +header-y += ncp.h +header-y += ncp_fs.h +header-y += ncp_mount.h +header-y += ncp_no.h +header-y += neighbour.h +header-y += net.h +header-y += net_dropmon.h +header-y += net_tstamp.h +header-y += netdevice.h +header-y += netfilter.h +header-y += netfilter_arp.h +header-y += netfilter_bridge.h +header-y += netfilter_decnet.h +header-y += netfilter_ipv4.h +header-y += netfilter_ipv6.h +header-y += netlink.h +header-y += netrom.h +header-y += nfc.h +header-y += nfs.h +header-y += nfs2.h +header-y += nfs3.h +header-y += nfs4.h +header-y += nfs4_mount.h +header-y += nfs_fs.h +header-y += nfs_idmap.h +header-y += nfs_mount.h +header-y += nfsacl.h +header-y += nl80211.h +header-y += nubus.h +header-y += nvram.h +header-y += omap3isp.h +header-y += omapfb.h +header-y += oom.h +header-y += packet_diag.h +header-y += param.h +header-y += parport.h +header-y += patchkey.h +header-y += pci.h +header-y += pci_regs.h +header-y += perf_event.h +header-y += personality.h +header-y += pfkeyv2.h +header-y += pg.h +header-y += phantom.h +header-y += phonet.h +header-y += pkt_cls.h +header-y += pkt_sched.h +header-y += pktcdvd.h +header-y += pmu.h +header-y += poll.h +header-y += posix_types.h +header-y += ppdev.h +header-y += ppp-comp.h +header-y += ppp-ioctl.h +header-y += ppp_defs.h +header-y += pps.h +header-y += prctl.h +header-y += ptp_clock.h +header-y += ptrace.h +header-y += qnx4_fs.h +header-y += qnxtypes.h +header-y += quota.h +header-y += radeonfb.h +header-y += random.h +header-y += raw.h +header-y += rds.h +header-y += reboot.h +header-y += reiserfs_fs.h +header-y += reiserfs_xattr.h +header-y += resource.h +header-y += rfkill.h +header-y += romfs_fs.h +header-y += rose.h +header-y += route.h +header-y += rtc.h +header-y += rtnetlink.h +header-y += scc.h +header-y += sched.h +header-y += screen_info.h +header-y += sdla.h +header-y += seccomp.h +header-y += securebits.h +header-y += selinux_netlink.h +header-y += sem.h +header-y += serial.h +header-y += serial_core.h +header-y += serial_reg.h +header-y += serio.h +header-y += shm.h +header-y += signal.h +header-y += signalfd.h +header-y += snmp.h +header-y += sock_diag.h +header-y += socket.h +header-y += sockios.h +header-y += som.h +header-y += sonet.h +header-y += sonypi.h +header-y += sound.h +header-y += soundcard.h +header-y += stat.h +header-y += stddef.h +header-y += string.h +header-y += suspend_ioctls.h +header-y += swab.h +header-y += synclink.h +header-y += sysctl.h +header-y += sysinfo.h +header-y += taskstats.h +header-y += tcp.h +header-y += tcp_metrics.h +header-y += telephony.h +header-y += termios.h +header-y += time.h +header-y += times.h +header-y += timex.h +header-y += tiocl.h +header-y += tipc.h +header-y += tipc_config.h +header-y += toshiba.h +header-y += tty.h +header-y += tty_flags.h +header-y += types.h +header-y += udf_fs_i.h +header-y += udp.h +header-y += uhid.h +header-y += uinput.h +header-y += uio.h +header-y += ultrasound.h +header-y += un.h +header-y += unistd.h +header-y += unix_diag.h +header-y += usbdevice_fs.h +header-y += utime.h +header-y += utsname.h +header-y += uuid.h +header-y += uvcvideo.h +header-y += v4l2-common.h +header-y += v4l2-controls.h +header-y += v4l2-dv-timings.h +header-y += v4l2-mediabus.h +header-y += v4l2-subdev.h +header-y += veth.h +header-y += vfio.h +header-y += vhost.h +header-y += videodev2.h +header-y += virtio_9p.h +header-y += virtio_balloon.h +header-y += virtio_blk.h +header-y += virtio_config.h +header-y += virtio_console.h +header-y += virtio_ids.h +header-y += virtio_net.h +header-y += virtio_pci.h +header-y += virtio_ring.h +header-y += virtio_rng.h +header-y += vt.h +header-y += wait.h +header-y += wanrouter.h +header-y += watchdog.h +header-y += wimax.h +header-y += wireless.h +header-y += x25.h +header-y += xattr.h +header-y += xfrm.h diff --git a/include/uapi/linux/a.out.h b/include/uapi/linux/a.out.h new file mode 100644 index 00000000000..7caf44c7fa5 --- /dev/null +++ b/include/uapi/linux/a.out.h @@ -0,0 +1,274 @@ +#ifndef _UAPI__A_OUT_GNU_H__ +#define _UAPI__A_OUT_GNU_H__ + +#define __GNU_EXEC_MACROS__ + +#ifndef __STRUCT_EXEC_OVERRIDE__ + +#include <asm/a.out.h> + +#endif /* __STRUCT_EXEC_OVERRIDE__ */ + +#ifndef __ASSEMBLY__ + +/* these go in the N_MACHTYPE field */ +enum machine_type { +#if defined (M_OLDSUN2) + M__OLDSUN2 = M_OLDSUN2, +#else + M_OLDSUN2 = 0, +#endif +#if defined (M_68010) + M__68010 = M_68010, +#else + M_68010 = 1, +#endif +#if defined (M_68020) + M__68020 = M_68020, +#else + M_68020 = 2, +#endif +#if defined (M_SPARC) + M__SPARC = M_SPARC, +#else + M_SPARC = 3, +#endif + /* skip a bunch so we don't run into any of sun's numbers */ + M_386 = 100, + M_MIPS1 = 151, /* MIPS R3000/R3000 binary */ + M_MIPS2 = 152 /* MIPS R6000/R4000 binary */ +}; + +#if !defined (N_MAGIC) +#define N_MAGIC(exec) ((exec).a_info & 0xffff) +#endif +#define N_MACHTYPE(exec) ((enum machine_type)(((exec).a_info >> 16) & 0xff)) +#define N_FLAGS(exec) (((exec).a_info >> 24) & 0xff) +#define N_SET_INFO(exec, magic, type, flags) \ + ((exec).a_info = ((magic) & 0xffff) \ + | (((int)(type) & 0xff) << 16) \ + | (((flags) & 0xff) << 24)) +#define N_SET_MAGIC(exec, magic) \ + ((exec).a_info = (((exec).a_info & 0xffff0000) | ((magic) & 0xffff))) + +#define N_SET_MACHTYPE(exec, machtype) \ + ((exec).a_info = \ + ((exec).a_info&0xff00ffff) | ((((int)(machtype))&0xff) << 16)) + +#define N_SET_FLAGS(exec, flags) \ + ((exec).a_info = \ + ((exec).a_info&0x00ffffff) | (((flags) & 0xff) << 24)) + +/* Code indicating object file or impure executable. */ +#define OMAGIC 0407 +/* Code indicating pure executable. */ +#define NMAGIC 0410 +/* Code indicating demand-paged executable. */ +#define ZMAGIC 0413 +/* This indicates a demand-paged executable with the header in the text. + The first page is unmapped to help trap NULL pointer references */ +#define QMAGIC 0314 + +/* Code indicating core file. */ +#define CMAGIC 0421 + +#if !defined (N_BADMAG) +#define N_BADMAG(x) (N_MAGIC(x) != OMAGIC \ + && N_MAGIC(x) != NMAGIC \ + && N_MAGIC(x) != ZMAGIC \ + && N_MAGIC(x) != QMAGIC) +#endif + +#define _N_HDROFF(x) (1024 - sizeof (struct exec)) + +#if !defined (N_TXTOFF) +#define N_TXTOFF(x) \ + (N_MAGIC(x) == ZMAGIC ? _N_HDROFF((x)) + sizeof (struct exec) : \ + (N_MAGIC(x) == QMAGIC ? 0 : sizeof (struct exec))) +#endif + +#if !defined (N_DATOFF) +#define N_DATOFF(x) (N_TXTOFF(x) + (x).a_text) +#endif + +#if !defined (N_TRELOFF) +#define N_TRELOFF(x) (N_DATOFF(x) + (x).a_data) +#endif + +#if !defined (N_DRELOFF) +#define N_DRELOFF(x) (N_TRELOFF(x) + N_TRSIZE(x)) +#endif + +#if !defined (N_SYMOFF) +#define N_SYMOFF(x) (N_DRELOFF(x) + N_DRSIZE(x)) +#endif + +#if !defined (N_STROFF) +#define N_STROFF(x) (N_SYMOFF(x) + N_SYMSIZE(x)) +#endif + +/* Address of text segment in memory after it is loaded. */ +#if !defined (N_TXTADDR) +#define N_TXTADDR(x) (N_MAGIC(x) == QMAGIC ? PAGE_SIZE : 0) +#endif + +/* Address of data segment in memory after it is loaded. + Note that it is up to you to define SEGMENT_SIZE + on machines not listed here. */ +#if defined(vax) || defined(hp300) || defined(pyr) +#define SEGMENT_SIZE page_size +#endif +#ifdef sony +#define SEGMENT_SIZE 0x2000 +#endif /* Sony. */ +#ifdef is68k +#define SEGMENT_SIZE 0x20000 +#endif +#if defined(m68k) && defined(PORTAR) +#define PAGE_SIZE 0x400 +#define SEGMENT_SIZE PAGE_SIZE +#endif + +#ifdef linux +#ifndef __KERNEL__ +#include <unistd.h> +#endif +#if defined(__i386__) || defined(__mc68000__) +#define SEGMENT_SIZE 1024 +#else +#ifndef SEGMENT_SIZE +#ifndef __KERNEL__ +#define SEGMENT_SIZE getpagesize() +#endif +#endif +#endif +#endif + +#define _N_SEGMENT_ROUND(x) ALIGN(x, SEGMENT_SIZE) + +#define _N_TXTENDADDR(x) (N_TXTADDR(x)+(x).a_text) + +#ifndef N_DATADDR +#define N_DATADDR(x) \ + (N_MAGIC(x)==OMAGIC? (_N_TXTENDADDR(x)) \ + : (_N_SEGMENT_ROUND (_N_TXTENDADDR(x)))) +#endif + +/* Address of bss segment in memory after it is loaded. */ +#if !defined (N_BSSADDR) +#define N_BSSADDR(x) (N_DATADDR(x) + (x).a_data) +#endif + +#if !defined (N_NLIST_DECLARED) +struct nlist { + union { + char *n_name; + struct nlist *n_next; + long n_strx; + } n_un; + unsigned char n_type; + char n_other; + short n_desc; + unsigned long n_value; +}; +#endif /* no N_NLIST_DECLARED. */ + +#if !defined (N_UNDF) +#define N_UNDF 0 +#endif +#if !defined (N_ABS) +#define N_ABS 2 +#endif +#if !defined (N_TEXT) +#define N_TEXT 4 +#endif +#if !defined (N_DATA) +#define N_DATA 6 +#endif +#if !defined (N_BSS) +#define N_BSS 8 +#endif +#if !defined (N_FN) +#define N_FN 15 +#endif + +#if !defined (N_EXT) +#define N_EXT 1 +#endif +#if !defined (N_TYPE) +#define N_TYPE 036 +#endif +#if !defined (N_STAB) +#define N_STAB 0340 +#endif + +/* The following type indicates the definition of a symbol as being + an indirect reference to another symbol. The other symbol + appears as an undefined reference, immediately following this symbol. + + Indirection is asymmetrical. The other symbol's value will be used + to satisfy requests for the indirect symbol, but not vice versa. + If the other symbol does not have a definition, libraries will + be searched to find a definition. */ +#define N_INDR 0xa + +/* The following symbols refer to set elements. + All the N_SET[ATDB] symbols with the same name form one set. + Space is allocated for the set in the text section, and each set + element's value is stored into one word of the space. + The first word of the space is the length of the set (number of elements). + + The address of the set is made into an N_SETV symbol + whose name is the same as the name of the set. + This symbol acts like a N_DATA global symbol + in that it can satisfy undefined external references. */ + +/* These appear as input to LD, in a .o file. */ +#define N_SETA 0x14 /* Absolute set element symbol */ +#define N_SETT 0x16 /* Text set element symbol */ +#define N_SETD 0x18 /* Data set element symbol */ +#define N_SETB 0x1A /* Bss set element symbol */ + +/* This is output from LD. */ +#define N_SETV 0x1C /* Pointer to set vector in data area. */ + +#if !defined (N_RELOCATION_INFO_DECLARED) +/* This structure describes a single relocation to be performed. + The text-relocation section of the file is a vector of these structures, + all of which apply to the text section. + Likewise, the data-relocation section applies to the data section. */ + +struct relocation_info +{ + /* Address (within segment) to be relocated. */ + int r_address; + /* The meaning of r_symbolnum depends on r_extern. */ + unsigned int r_symbolnum:24; + /* Nonzero means value is a pc-relative offset + and it should be relocated for changes in its own address + as well as for changes in the symbol or section specified. */ + unsigned int r_pcrel:1; + /* Length (as exponent of 2) of the field to be relocated. + Thus, a value of 2 indicates 1<<2 bytes. */ + unsigned int r_length:2; + /* 1 => relocate with value of symbol. + r_symbolnum is the index of the symbol + in file's the symbol table. + 0 => relocate with the address of a segment. + r_symbolnum is N_TEXT, N_DATA, N_BSS or N_ABS + (the N_EXT bit may be set also, but signifies nothing). */ + unsigned int r_extern:1; + /* Four bits that aren't used, but when writing an object file + it is desirable to clear them. */ +#ifdef NS32K + unsigned r_bsr:1; + unsigned r_disp:1; + unsigned r_pad:2; +#else + unsigned int r_pad:4; +#endif +}; +#endif /* no N_RELOCATION_INFO_DECLARED. */ + +#endif /*__ASSEMBLY__ */ +#endif /* _UAPI__A_OUT_GNU_H__ */ diff --git a/include/uapi/linux/acct.h b/include/uapi/linux/acct.h new file mode 100644 index 00000000000..11b6ca3e087 --- /dev/null +++ b/include/uapi/linux/acct.h @@ -0,0 +1,122 @@ +/* + * BSD Process Accounting for Linux - Definitions + * + * Author: Marco van Wieringen (mvw@planets.elm.net) + * + * This header file contains the definitions needed to implement + * BSD-style process accounting. The kernel accounting code and all + * user-level programs that try to do something useful with the + * process accounting log must include this file. + * + * Copyright (C) 1995 - 1997 Marco van Wieringen - ELM Consultancy B.V. + * + */ + +#ifndef _UAPI_LINUX_ACCT_H +#define _UAPI_LINUX_ACCT_H + +#include <linux/types.h> + +#include <asm/param.h> +#include <asm/byteorder.h> + +/* + * comp_t is a 16-bit "floating" point number with a 3-bit base 8 + * exponent and a 13-bit fraction. + * comp2_t is 24-bit with 5-bit base 2 exponent and 20 bit fraction + * (leading 1 not stored). + * See linux/kernel/acct.c for the specific encoding systems used. + */ + +typedef __u16 comp_t; +typedef __u32 comp2_t; + +/* + * accounting file record + * + * This structure contains all of the information written out to the + * process accounting file whenever a process exits. + */ + +#define ACCT_COMM 16 + +struct acct +{ + char ac_flag; /* Flags */ + char ac_version; /* Always set to ACCT_VERSION */ + /* for binary compatibility back until 2.0 */ + __u16 ac_uid16; /* LSB of Real User ID */ + __u16 ac_gid16; /* LSB of Real Group ID */ + __u16 ac_tty; /* Control Terminal */ + __u32 ac_btime; /* Process Creation Time */ + comp_t ac_utime; /* User Time */ + comp_t ac_stime; /* System Time */ + comp_t ac_etime; /* Elapsed Time */ + comp_t ac_mem; /* Average Memory Usage */ + comp_t ac_io; /* Chars Transferred */ + comp_t ac_rw; /* Blocks Read or Written */ + comp_t ac_minflt; /* Minor Pagefaults */ + comp_t ac_majflt; /* Major Pagefaults */ + comp_t ac_swaps; /* Number of Swaps */ +/* m68k had no padding here. */ +#if !defined(CONFIG_M68K) || !defined(__KERNEL__) + __u16 ac_ahz; /* AHZ */ +#endif + __u32 ac_exitcode; /* Exitcode */ + char ac_comm[ACCT_COMM + 1]; /* Command Name */ + __u8 ac_etime_hi; /* Elapsed Time MSB */ + __u16 ac_etime_lo; /* Elapsed Time LSB */ + __u32 ac_uid; /* Real User ID */ + __u32 ac_gid; /* Real Group ID */ +}; + +struct acct_v3 +{ + char ac_flag; /* Flags */ + char ac_version; /* Always set to ACCT_VERSION */ + __u16 ac_tty; /* Control Terminal */ + __u32 ac_exitcode; /* Exitcode */ + __u32 ac_uid; /* Real User ID */ + __u32 ac_gid; /* Real Group ID */ + __u32 ac_pid; /* Process ID */ + __u32 ac_ppid; /* Parent Process ID */ + __u32 ac_btime; /* Process Creation Time */ +#ifdef __KERNEL__ + __u32 ac_etime; /* Elapsed Time */ +#else + float ac_etime; /* Elapsed Time */ +#endif + comp_t ac_utime; /* User Time */ + comp_t ac_stime; /* System Time */ + comp_t ac_mem; /* Average Memory Usage */ + comp_t ac_io; /* Chars Transferred */ + comp_t ac_rw; /* Blocks Read or Written */ + comp_t ac_minflt; /* Minor Pagefaults */ + comp_t ac_majflt; /* Major Pagefaults */ + comp_t ac_swaps; /* Number of Swaps */ + char ac_comm[ACCT_COMM]; /* Command Name */ +}; + +/* + * accounting flags + */ + /* bit set when the process ... */ +#define AFORK 0x01 /* ... executed fork, but did not exec */ +#define ASU 0x02 /* ... used super-user privileges */ +#define ACOMPAT 0x04 /* ... used compatibility mode (VAX only not used) */ +#define ACORE 0x08 /* ... dumped core */ +#define AXSIG 0x10 /* ... was killed by a signal */ + +#ifdef __BIG_ENDIAN +#define ACCT_BYTEORDER 0x80 /* accounting file is big endian */ +#else +#define ACCT_BYTEORDER 0x00 /* accounting file is little endian */ +#endif + +#ifndef __KERNEL__ +#define ACCT_VERSION 2 +#define AHZ (HZ) +#endif /* __KERNEL */ + + +#endif /* _UAPI_LINUX_ACCT_H */ diff --git a/include/uapi/linux/adb.h b/include/uapi/linux/adb.h new file mode 100644 index 00000000000..0ea1075fc4a --- /dev/null +++ b/include/uapi/linux/adb.h @@ -0,0 +1,44 @@ +/* + * Definitions for ADB (Apple Desktop Bus) support. + */ +#ifndef _UAPI__ADB_H +#define _UAPI__ADB_H + +/* ADB commands */ +#define ADB_BUSRESET 0 +#define ADB_FLUSH(id) (0x01 | ((id) << 4)) +#define ADB_WRITEREG(id, reg) (0x08 | (reg) | ((id) << 4)) +#define ADB_READREG(id, reg) (0x0C | (reg) | ((id) << 4)) + +/* ADB default device IDs (upper 4 bits of ADB command byte) */ +#define ADB_DONGLE 1 /* "software execution control" devices */ +#define ADB_KEYBOARD 2 +#define ADB_MOUSE 3 +#define ADB_TABLET 4 +#define ADB_MODEM 5 +#define ADB_MISC 7 /* maybe a monitor */ + +#define ADB_RET_OK 0 +#define ADB_RET_TIMEOUT 3 + +/* The kind of ADB request. The controller may emulate some + or all of those CUDA/PMU packet kinds */ +#define ADB_PACKET 0 +#define CUDA_PACKET 1 +#define ERROR_PACKET 2 +#define TIMER_PACKET 3 +#define POWER_PACKET 4 +#define MACIIC_PACKET 5 +#define PMU_PACKET 6 +#define ADB_QUERY 7 + +/* ADB queries */ + +/* ADB_QUERY_GETDEVINFO + * Query ADB slot for device presence + * data[2] = id, rep[0] = orig addr, rep[1] = handler_id + */ +#define ADB_QUERY_GETDEVINFO 1 + + +#endif /* _UAPI__ADB_H */ diff --git a/include/uapi/linux/adfs_fs.h b/include/uapi/linux/adfs_fs.h new file mode 100644 index 00000000000..a1bf43754dd --- /dev/null +++ b/include/uapi/linux/adfs_fs.h @@ -0,0 +1,44 @@ +#ifndef _UAPI_ADFS_FS_H +#define _UAPI_ADFS_FS_H + +#include <linux/types.h> +#include <linux/magic.h> + +/* + * Disc Record at disc address 0xc00 + */ +struct adfs_discrecord { + __u8 log2secsize; + __u8 secspertrack; + __u8 heads; + __u8 density; + __u8 idlen; + __u8 log2bpmb; + __u8 skew; + __u8 bootoption; + __u8 lowsector; + __u8 nzones; + __le16 zone_spare; + __le32 root; + __le32 disc_size; + __le16 disc_id; + __u8 disc_name[10]; + __le32 disc_type; + __le32 disc_size_high; + __u8 log2sharesize:4; + __u8 unused40:4; + __u8 big_flag:1; + __u8 unused41:1; + __u8 nzones_high; + __le32 format_version; + __le32 root_size; + __u8 unused52[60 - 52]; +}; + +#define ADFS_DISCRECORD (0xc00) +#define ADFS_DR_OFFSET (0x1c0) +#define ADFS_DR_SIZE 60 +#define ADFS_DR_SIZE_BITS (ADFS_DR_SIZE << 3) + + +#endif /* _UAPI_ADFS_FS_H */ diff --git a/include/linux/affs_hardblocks.h b/include/uapi/linux/affs_hardblocks.h index f1b948c1f59..f1b948c1f59 100644 --- a/include/linux/affs_hardblocks.h +++ b/include/uapi/linux/affs_hardblocks.h diff --git a/include/uapi/linux/agpgart.h b/include/uapi/linux/agpgart.h new file mode 100644 index 00000000000..4e828cf487b --- /dev/null +++ b/include/uapi/linux/agpgart.h @@ -0,0 +1,113 @@ +/* + * AGPGART module version 0.99 + * Copyright (C) 1999 Jeff Hartmann + * Copyright (C) 1999 Precision Insight, Inc. + * Copyright (C) 1999 Xi Graphics, Inc. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included + * in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS + * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * JEFF HARTMANN, OR ANY OTHER CONTRIBUTORS BE LIABLE FOR ANY CLAIM, + * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR + * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE + * OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + */ + +#ifndef _UAPI_AGP_H +#define _UAPI_AGP_H + +#define AGPIOC_BASE 'A' +#define AGPIOC_INFO _IOR (AGPIOC_BASE, 0, struct agp_info*) +#define AGPIOC_ACQUIRE _IO (AGPIOC_BASE, 1) +#define AGPIOC_RELEASE _IO (AGPIOC_BASE, 2) +#define AGPIOC_SETUP _IOW (AGPIOC_BASE, 3, struct agp_setup*) +#define AGPIOC_RESERVE _IOW (AGPIOC_BASE, 4, struct agp_region*) +#define AGPIOC_PROTECT _IOW (AGPIOC_BASE, 5, struct agp_region*) +#define AGPIOC_ALLOCATE _IOWR(AGPIOC_BASE, 6, struct agp_allocate*) +#define AGPIOC_DEALLOCATE _IOW (AGPIOC_BASE, 7, int) +#define AGPIOC_BIND _IOW (AGPIOC_BASE, 8, struct agp_bind*) +#define AGPIOC_UNBIND _IOW (AGPIOC_BASE, 9, struct agp_unbind*) +#define AGPIOC_CHIPSET_FLUSH _IO (AGPIOC_BASE, 10) + +#define AGP_DEVICE "/dev/agpgart" + +#ifndef TRUE +#define TRUE 1 +#endif + +#ifndef FALSE +#define FALSE 0 +#endif + +#ifndef __KERNEL__ +#include <linux/types.h> + +struct agp_version { + __u16 major; + __u16 minor; +}; + +typedef struct _agp_info { + struct agp_version version; /* version of the driver */ + __u32 bridge_id; /* bridge vendor/device */ + __u32 agp_mode; /* mode info of bridge */ + unsigned long aper_base;/* base of aperture */ + size_t aper_size; /* size of aperture */ + size_t pg_total; /* max pages (swap + system) */ + size_t pg_system; /* max pages (system) */ + size_t pg_used; /* current pages used */ +} agp_info; + +typedef struct _agp_setup { + __u32 agp_mode; /* mode info of bridge */ +} agp_setup; + +/* + * The "prot" down below needs still a "sleep" flag somehow ... + */ +typedef struct _agp_segment { + __kernel_off_t pg_start; /* starting page to populate */ + __kernel_size_t pg_count; /* number of pages */ + int prot; /* prot flags for mmap */ +} agp_segment; + +typedef struct _agp_region { + __kernel_pid_t pid; /* pid of process */ + __kernel_size_t seg_count; /* number of segments */ + struct _agp_segment *seg_list; +} agp_region; + +typedef struct _agp_allocate { + int key; /* tag of allocation */ + __kernel_size_t pg_count;/* number of pages */ + __u32 type; /* 0 == normal, other devspec */ + __u32 physical; /* device specific (some devices + * need a phys address of the + * actual page behind the gatt + * table) */ +} agp_allocate; + +typedef struct _agp_bind { + int key; /* tag of allocation */ + __kernel_off_t pg_start;/* starting page to populate */ +} agp_bind; + +typedef struct _agp_unbind { + int key; /* tag of allocation */ + __u32 priority; /* priority for paging out */ +} agp_unbind; + +#endif /* __KERNEL__ */ + +#endif /* _UAPI_AGP_H */ diff --git a/include/linux/aio_abi.h b/include/uapi/linux/aio_abi.h index 86fa7a71336..86fa7a71336 100644 --- a/include/linux/aio_abi.h +++ b/include/uapi/linux/aio_abi.h diff --git a/include/uapi/linux/apm_bios.h b/include/uapi/linux/apm_bios.h new file mode 100644 index 00000000000..724f409adae --- /dev/null +++ b/include/uapi/linux/apm_bios.h @@ -0,0 +1,135 @@ +/* + * Include file for the interface to an APM BIOS + * Copyright 1994-2001 Stephen Rothwell (sfr@canb.auug.org.au) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ +#ifndef _UAPI_LINUX_APM_H +#define _UAPI_LINUX_APM_H + + +#include <linux/types.h> + +typedef unsigned short apm_event_t; +typedef unsigned short apm_eventinfo_t; + +struct apm_bios_info { + __u16 version; + __u16 cseg; + __u32 offset; + __u16 cseg_16; + __u16 dseg; + __u16 flags; + __u16 cseg_len; + __u16 cseg_16_len; + __u16 dseg_len; +}; + + +/* + * Power states + */ +#define APM_STATE_READY 0x0000 +#define APM_STATE_STANDBY 0x0001 +#define APM_STATE_SUSPEND 0x0002 +#define APM_STATE_OFF 0x0003 +#define APM_STATE_BUSY 0x0004 +#define APM_STATE_REJECT 0x0005 +#define APM_STATE_OEM_SYS 0x0020 +#define APM_STATE_OEM_DEV 0x0040 + +#define APM_STATE_DISABLE 0x0000 +#define APM_STATE_ENABLE 0x0001 + +#define APM_STATE_DISENGAGE 0x0000 +#define APM_STATE_ENGAGE 0x0001 + +/* + * Events (results of Get PM Event) + */ +#define APM_SYS_STANDBY 0x0001 +#define APM_SYS_SUSPEND 0x0002 +#define APM_NORMAL_RESUME 0x0003 +#define APM_CRITICAL_RESUME 0x0004 +#define APM_LOW_BATTERY 0x0005 +#define APM_POWER_STATUS_CHANGE 0x0006 +#define APM_UPDATE_TIME 0x0007 +#define APM_CRITICAL_SUSPEND 0x0008 +#define APM_USER_STANDBY 0x0009 +#define APM_USER_SUSPEND 0x000a +#define APM_STANDBY_RESUME 0x000b +#define APM_CAPABILITY_CHANGE 0x000c + +/* + * Error codes + */ +#define APM_SUCCESS 0x00 +#define APM_DISABLED 0x01 +#define APM_CONNECTED 0x02 +#define APM_NOT_CONNECTED 0x03 +#define APM_16_CONNECTED 0x05 +#define APM_16_UNSUPPORTED 0x06 +#define APM_32_CONNECTED 0x07 +#define APM_32_UNSUPPORTED 0x08 +#define APM_BAD_DEVICE 0x09 +#define APM_BAD_PARAM 0x0a +#define APM_NOT_ENGAGED 0x0b +#define APM_BAD_FUNCTION 0x0c +#define APM_RESUME_DISABLED 0x0d +#define APM_NO_ERROR 0x53 +#define APM_BAD_STATE 0x60 +#define APM_NO_EVENTS 0x80 +#define APM_NOT_PRESENT 0x86 + +/* + * APM Device IDs + */ +#define APM_DEVICE_BIOS 0x0000 +#define APM_DEVICE_ALL 0x0001 +#define APM_DEVICE_DISPLAY 0x0100 +#define APM_DEVICE_STORAGE 0x0200 +#define APM_DEVICE_PARALLEL 0x0300 +#define APM_DEVICE_SERIAL 0x0400 +#define APM_DEVICE_NETWORK 0x0500 +#define APM_DEVICE_PCMCIA 0x0600 +#define APM_DEVICE_BATTERY 0x8000 +#define APM_DEVICE_OEM 0xe000 +#define APM_DEVICE_OLD_ALL 0xffff +#define APM_DEVICE_CLASS 0x00ff +#define APM_DEVICE_MASK 0xff00 + + +/* + * Battery status + */ +#define APM_MAX_BATTERIES 2 + +/* + * APM defined capability bit flags + */ +#define APM_CAP_GLOBAL_STANDBY 0x0001 +#define APM_CAP_GLOBAL_SUSPEND 0x0002 +#define APM_CAP_RESUME_STANDBY_TIMER 0x0004 /* Timer resume from standby */ +#define APM_CAP_RESUME_SUSPEND_TIMER 0x0008 /* Timer resume from suspend */ +#define APM_CAP_RESUME_STANDBY_RING 0x0010 /* Resume on Ring fr standby */ +#define APM_CAP_RESUME_SUSPEND_RING 0x0020 /* Resume on Ring fr suspend */ +#define APM_CAP_RESUME_STANDBY_PCMCIA 0x0040 /* Resume on PCMCIA Ring */ +#define APM_CAP_RESUME_SUSPEND_PCMCIA 0x0080 /* Resume on PCMCIA Ring */ + +/* + * ioctl operations + */ +#include <linux/ioctl.h> + +#define APM_IOC_STANDBY _IO('A', 1) +#define APM_IOC_SUSPEND _IO('A', 2) + +#endif /* _UAPI_LINUX_APM_H */ diff --git a/include/linux/arcfb.h b/include/uapi/linux/arcfb.h index 721e7654dae..721e7654dae 100644 --- a/include/linux/arcfb.h +++ b/include/uapi/linux/arcfb.h diff --git a/include/uapi/linux/atalk.h b/include/uapi/linux/atalk.h new file mode 100644 index 00000000000..4bcd596e638 --- /dev/null +++ b/include/uapi/linux/atalk.h @@ -0,0 +1,44 @@ +#ifndef _UAPI__LINUX_ATALK_H__ +#define _UAPI__LINUX_ATALK_H__ + +#include <linux/types.h> +#include <asm/byteorder.h> +#include <linux/socket.h> + +/* + * AppleTalk networking structures + * + * The following are directly referenced from the University Of Michigan + * netatalk for compatibility reasons. + */ +#define ATPORT_FIRST 1 +#define ATPORT_RESERVED 128 +#define ATPORT_LAST 254 /* 254 is only legal on localtalk */ +#define ATADDR_ANYNET (__u16)0 +#define ATADDR_ANYNODE (__u8)0 +#define ATADDR_ANYPORT (__u8)0 +#define ATADDR_BCAST (__u8)255 +#define DDP_MAXSZ 587 +#define DDP_MAXHOPS 15 /* 4 bits of hop counter */ + +#define SIOCATALKDIFADDR (SIOCPROTOPRIVATE + 0) + +struct atalk_addr { + __be16 s_net; + __u8 s_node; +}; + +struct sockaddr_at { + __kernel_sa_family_t sat_family; + __u8 sat_port; + struct atalk_addr sat_addr; + char sat_zero[8]; +}; + +struct atalk_netrange { + __u8 nr_phase; + __be16 nr_firstnet; + __be16 nr_lastnet; +}; + +#endif /* _UAPI__LINUX_ATALK_H__ */ diff --git a/include/uapi/linux/atm.h b/include/uapi/linux/atm.h new file mode 100644 index 00000000000..88399db602a --- /dev/null +++ b/include/uapi/linux/atm.h @@ -0,0 +1,241 @@ +/* atm.h - general ATM declarations */ + +/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */ + + +/* + * WARNING: User-space programs should not #include <linux/atm.h> directly. + * Instead, #include <atm.h> + */ + +#ifndef _UAPI_LINUX_ATM_H +#define _UAPI_LINUX_ATM_H + +/* + * BEGIN_xx and END_xx markers are used for automatic generation of + * documentation. Do not change them. + */ + +#include <linux/compiler.h> +#include <linux/atmapi.h> +#include <linux/atmsap.h> +#include <linux/atmioc.h> +#include <linux/types.h> + + +/* general ATM constants */ +#define ATM_CELL_SIZE 53 /* ATM cell size incl. header */ +#define ATM_CELL_PAYLOAD 48 /* ATM payload size */ +#define ATM_AAL0_SDU 52 /* AAL0 SDU size */ +#define ATM_MAX_AAL34_PDU 65535 /* maximum AAL3/4 PDU payload */ +#define ATM_AAL5_TRAILER 8 /* AAL5 trailer size */ +#define ATM_MAX_AAL5_PDU 65535 /* maximum AAL5 PDU payload */ +#define ATM_MAX_CDV 9999 /* maximum (default) CDV */ +#define ATM_NOT_RSV_VCI 32 /* first non-reserved VCI value */ + +#define ATM_MAX_VPI 255 /* maximum VPI at the UNI */ +#define ATM_MAX_VPI_NNI 4096 /* maximum VPI at the NNI */ +#define ATM_MAX_VCI 65535 /* maximum VCI */ + + +/* "protcol" values for the socket system call */ +#define ATM_NO_AAL 0 /* AAL not specified */ +#define ATM_AAL0 13 /* "raw" ATM cells */ +#define ATM_AAL1 1 /* AAL1 (CBR) */ +#define ATM_AAL2 2 /* AAL2 (VBR) */ +#define ATM_AAL34 3 /* AAL3/4 (data) */ +#define ATM_AAL5 5 /* AAL5 (data) */ + +/* + * socket option name coding functions + * + * Note that __SO_ENCODE and __SO_LEVEL are somewhat a hack since the + * << 22 only reserves 9 bits for the level. On some architectures + * SOL_SOCKET is 0xFFFF, so that's a bit of a problem + */ + +#define __SO_ENCODE(l,n,t) ((((l) & 0x1FF) << 22) | ((n) << 16) | \ + sizeof(t)) +#define __SO_LEVEL_MATCH(c,m) (((c) >> 22) == ((m) & 0x1FF)) +#define __SO_NUMBER(c) (((c) >> 16) & 0x3f) +#define __SO_SIZE(c) ((c) & 0x3fff) + +/* + * ATM layer + */ + +#define SO_SETCLP __SO_ENCODE(SOL_ATM,0,int) + /* set CLP bit value - TODO */ +#define SO_CIRANGE __SO_ENCODE(SOL_ATM,1,struct atm_cirange) + /* connection identifier range; socket must be + bound or connected */ +#define SO_ATMQOS __SO_ENCODE(SOL_ATM,2,struct atm_qos) + /* Quality of Service setting */ +#define SO_ATMSAP __SO_ENCODE(SOL_ATM,3,struct atm_sap) + /* Service Access Point */ +#define SO_ATMPVC __SO_ENCODE(SOL_ATM,4,struct sockaddr_atmpvc) + /* "PVC" address (also for SVCs); get only */ +#define SO_MULTIPOINT __SO_ENCODE(SOL_ATM, 5, int) + /* make this vc a p2mp */ + + +/* + * Note @@@: since the socket layers don't really distinguish the control and + * the data plane but generally seems to be data plane-centric, any layer is + * about equally wrong for the SAP. If you have a better idea about this, + * please speak up ... + */ + + +/* ATM cell header (for AAL0) */ + +/* BEGIN_CH */ +#define ATM_HDR_GFC_MASK 0xf0000000 +#define ATM_HDR_GFC_SHIFT 28 +#define ATM_HDR_VPI_MASK 0x0ff00000 +#define ATM_HDR_VPI_SHIFT 20 +#define ATM_HDR_VCI_MASK 0x000ffff0 +#define ATM_HDR_VCI_SHIFT 4 +#define ATM_HDR_PTI_MASK 0x0000000e +#define ATM_HDR_PTI_SHIFT 1 +#define ATM_HDR_CLP 0x00000001 +/* END_CH */ + + +/* PTI codings */ + +/* BEGIN_PTI */ +#define ATM_PTI_US0 0 /* user data cell, congestion not exp, SDU-type 0 */ +#define ATM_PTI_US1 1 /* user data cell, congestion not exp, SDU-type 1 */ +#define ATM_PTI_UCES0 2 /* user data cell, cong. experienced, SDU-type 0 */ +#define ATM_PTI_UCES1 3 /* user data cell, cong. experienced, SDU-type 1 */ +#define ATM_PTI_SEGF5 4 /* segment OAM F5 flow related cell */ +#define ATM_PTI_E2EF5 5 /* end-to-end OAM F5 flow related cell */ +#define ATM_PTI_RSV_RM 6 /* reserved for traffic control/resource mgmt */ +#define ATM_PTI_RSV 7 /* reserved */ +/* END_PTI */ + + +/* + * The following items should stay in linux/atm.h, which should be linked to + * netatm/atm.h + */ + +/* Traffic description */ + +#define ATM_NONE 0 /* no traffic */ +#define ATM_UBR 1 +#define ATM_CBR 2 +#define ATM_VBR 3 +#define ATM_ABR 4 +#define ATM_ANYCLASS 5 /* compatible with everything */ + +#define ATM_MAX_PCR -1 /* maximum available PCR */ + +struct atm_trafprm { + unsigned char traffic_class; /* traffic class (ATM_UBR, ...) */ + int max_pcr; /* maximum PCR in cells per second */ + int pcr; /* desired PCR in cells per second */ + int min_pcr; /* minimum PCR in cells per second */ + int max_cdv; /* maximum CDV in microseconds */ + int max_sdu; /* maximum SDU in bytes */ + /* extra params for ABR */ + unsigned int icr; /* Initial Cell Rate (24-bit) */ + unsigned int tbe; /* Transient Buffer Exposure (24-bit) */ + unsigned int frtt : 24; /* Fixed Round Trip Time (24-bit) */ + unsigned int rif : 4; /* Rate Increment Factor (4-bit) */ + unsigned int rdf : 4; /* Rate Decrease Factor (4-bit) */ + unsigned int nrm_pres :1; /* nrm present bit */ + unsigned int trm_pres :1; /* rm present bit */ + unsigned int adtf_pres :1; /* adtf present bit */ + unsigned int cdf_pres :1; /* cdf present bit*/ + unsigned int nrm :3; /* Max # of Cells for each forward RM cell (3-bit) */ + unsigned int trm :3; /* Time between forward RM cells (3-bit) */ + unsigned int adtf :10; /* ACR Decrease Time Factor (10-bit) */ + unsigned int cdf :3; /* Cutoff Decrease Factor (3-bit) */ + unsigned int spare :9; /* spare bits */ +}; + +struct atm_qos { + struct atm_trafprm txtp; /* parameters in TX direction */ + struct atm_trafprm rxtp __ATM_API_ALIGN; + /* parameters in RX direction */ + unsigned char aal __ATM_API_ALIGN; +}; + +/* PVC addressing */ + +#define ATM_ITF_ANY -1 /* "magic" PVC address values */ +#define ATM_VPI_ANY -1 +#define ATM_VCI_ANY -1 +#define ATM_VPI_UNSPEC -2 +#define ATM_VCI_UNSPEC -2 + + +struct sockaddr_atmpvc { + unsigned short sap_family; /* address family, AF_ATMPVC */ + struct { /* PVC address */ + short itf; /* ATM interface */ + short vpi; /* VPI (only 8 bits at UNI) */ + int vci; /* VCI (only 16 bits at UNI) */ + } sap_addr __ATM_API_ALIGN; /* PVC address */ +}; + +/* SVC addressing */ + +#define ATM_ESA_LEN 20 /* ATM End System Address length */ +#define ATM_E164_LEN 12 /* maximum E.164 number length */ + +#define ATM_AFI_DCC 0x39 /* DCC ATM Format */ +#define ATM_AFI_ICD 0x47 /* ICD ATM Format */ +#define ATM_AFI_E164 0x45 /* E.164 ATM Format */ +#define ATM_AFI_LOCAL 0x49 /* Local ATM Format */ + +#define ATM_AFI_DCC_GROUP 0xBD /* DCC ATM Group Format */ +#define ATM_AFI_ICD_GROUP 0xC5 /* ICD ATM Group Format */ +#define ATM_AFI_E164_GROUP 0xC3 /* E.164 ATM Group Format */ +#define ATM_AFI_LOCAL_GROUP 0xC7 /* Local ATM Group Format */ + +#define ATM_LIJ_NONE 0 /* no leaf-initiated join */ +#define ATM_LIJ 1 /* request joining */ +#define ATM_LIJ_RPJ 2 /* set to root-prompted join */ +#define ATM_LIJ_NJ 3 /* set to network join */ + + +struct sockaddr_atmsvc { + unsigned short sas_family; /* address family, AF_ATMSVC */ + struct { /* SVC address */ + unsigned char prv[ATM_ESA_LEN];/* private ATM address */ + char pub[ATM_E164_LEN+1]; /* public address (E.164) */ + /* unused addresses must be bzero'ed */ + char lij_type; /* role in LIJ call; one of ATM_LIJ* */ + __u32 lij_id; /* LIJ call identifier */ + } sas_addr __ATM_API_ALIGN; /* SVC address */ +}; + + +static __inline__ int atmsvc_addr_in_use(struct sockaddr_atmsvc addr) +{ + return *addr.sas_addr.prv || *addr.sas_addr.pub; +} + + +static __inline__ int atmpvc_addr_in_use(struct sockaddr_atmpvc addr) +{ + return addr.sap_addr.itf || addr.sap_addr.vpi || addr.sap_addr.vci; +} + + +/* + * Some stuff for linux/sockios.h + */ + +struct atmif_sioc { + int number; + int length; + void __user *arg; +}; + + +typedef unsigned short atm_backend_t; +#endif /* _UAPI_LINUX_ATM_H */ diff --git a/include/linux/atm_eni.h b/include/uapi/linux/atm_eni.h index 34f31797255..34f31797255 100644 --- a/include/linux/atm_eni.h +++ b/include/uapi/linux/atm_eni.h diff --git a/include/linux/atm_he.h b/include/uapi/linux/atm_he.h index 2a7713b597c..2a7713b597c 100644 --- a/include/linux/atm_he.h +++ b/include/uapi/linux/atm_he.h diff --git a/include/linux/atm_idt77105.h b/include/uapi/linux/atm_idt77105.h index 8b724000aa5..8b724000aa5 100644 --- a/include/linux/atm_idt77105.h +++ b/include/uapi/linux/atm_idt77105.h diff --git a/include/linux/atm_nicstar.h b/include/uapi/linux/atm_nicstar.h index 577b79f33e8..577b79f33e8 100644 --- a/include/linux/atm_nicstar.h +++ b/include/uapi/linux/atm_nicstar.h diff --git a/include/uapi/linux/atm_tcp.h b/include/uapi/linux/atm_tcp.h new file mode 100644 index 00000000000..914e821da64 --- /dev/null +++ b/include/uapi/linux/atm_tcp.h @@ -0,0 +1,61 @@ +/* atm_tcp.h - Driver-specific declarations of the ATMTCP driver (for use by + driver-specific utilities) */ + +/* Written 1997-2000 by Werner Almesberger, EPFL LRC/ICA */ + + +#ifndef _UAPILINUX_ATM_TCP_H +#define _UAPILINUX_ATM_TCP_H + +#include <linux/atmapi.h> +#include <linux/atm.h> +#include <linux/atmioc.h> +#include <linux/types.h> + + +/* + * All values in struct atmtcp_hdr are in network byte order + */ + +struct atmtcp_hdr { + __u16 vpi; + __u16 vci; + __u32 length; /* ... of data part */ +}; + +/* + * All values in struct atmtcp_command are in host byte order + */ + +#define ATMTCP_HDR_MAGIC (~0) /* this length indicates a command */ +#define ATMTCP_CTRL_OPEN 1 /* request/reply */ +#define ATMTCP_CTRL_CLOSE 2 /* request/reply */ + +struct atmtcp_control { + struct atmtcp_hdr hdr; /* must be first */ + int type; /* message type; both directions */ + atm_kptr_t vcc; /* both directions */ + struct sockaddr_atmpvc addr; /* suggested value from kernel */ + struct atm_qos qos; /* both directions */ + int result; /* to kernel only */ +} __ATM_API_ALIGN; + +/* + * Field usage: + * Messge type dir. hdr.v?i type addr qos vcc result + * ----------- ---- ------- ---- ---- --- --- ------ + * OPEN K->D Y Y Y Y Y 0 + * OPEN D->K - Y Y Y Y Y + * CLOSE K->D - - Y - Y 0 + * CLOSE D->K - - - - Y Y + */ + +#define SIOCSIFATMTCP _IO('a',ATMIOC_ITF) /* set ATMTCP mode */ +#define ATMTCP_CREATE _IO('a',ATMIOC_ITF+14) /* create persistent ATMTCP + interface */ +#define ATMTCP_REMOVE _IO('a',ATMIOC_ITF+15) /* destroy persistent ATMTCP + interface */ + + + +#endif /* _UAPILINUX_ATM_TCP_H */ diff --git a/include/linux/atm_zatm.h b/include/uapi/linux/atm_zatm.h index 10f0fa29454..10f0fa29454 100644 --- a/include/linux/atm_zatm.h +++ b/include/uapi/linux/atm_zatm.h diff --git a/include/linux/atmapi.h b/include/uapi/linux/atmapi.h index 8fe54d90d95..8fe54d90d95 100644 --- a/include/linux/atmapi.h +++ b/include/uapi/linux/atmapi.h diff --git a/include/linux/atmarp.h b/include/uapi/linux/atmarp.h index 231f4bdec73..231f4bdec73 100644 --- a/include/linux/atmarp.h +++ b/include/uapi/linux/atmarp.h diff --git a/include/linux/atmbr2684.h b/include/uapi/linux/atmbr2684.h index fdb2629b618..fdb2629b618 100644 --- a/include/linux/atmbr2684.h +++ b/include/uapi/linux/atmbr2684.h diff --git a/include/linux/atmclip.h b/include/uapi/linux/atmclip.h index 02c94c448dd..02c94c448dd 100644 --- a/include/linux/atmclip.h +++ b/include/uapi/linux/atmclip.h diff --git a/include/uapi/linux/atmdev.h b/include/uapi/linux/atmdev.h new file mode 100644 index 00000000000..93e0ec008ca --- /dev/null +++ b/include/uapi/linux/atmdev.h @@ -0,0 +1,215 @@ +/* atmdev.h - ATM device driver declarations and various related items */ + +/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */ + + +#ifndef _UAPILINUX_ATMDEV_H +#define _UAPILINUX_ATMDEV_H + + +#include <linux/atmapi.h> +#include <linux/atm.h> +#include <linux/atmioc.h> + + +#define ESI_LEN 6 + +#define ATM_OC3_PCR (155520000/270*260/8/53) + /* OC3 link rate: 155520000 bps + SONET overhead: /270*260 (9 section, 1 path) + bits per cell: /8/53 + max cell rate: 353207.547 cells/sec */ +#define ATM_25_PCR ((25600000/8-8000)/54) + /* 25 Mbps ATM cell rate (59111) */ +#define ATM_OC12_PCR (622080000/1080*1040/8/53) + /* OC12 link rate: 622080000 bps + SONET overhead: /1080*1040 + bits per cell: /8/53 + max cell rate: 1412830.188 cells/sec */ +#define ATM_DS3_PCR (8000*12) + /* DS3: 12 cells in a 125 usec time slot */ + + +#define __AAL_STAT_ITEMS \ + __HANDLE_ITEM(tx); /* TX okay */ \ + __HANDLE_ITEM(tx_err); /* TX errors */ \ + __HANDLE_ITEM(rx); /* RX okay */ \ + __HANDLE_ITEM(rx_err); /* RX errors */ \ + __HANDLE_ITEM(rx_drop); /* RX out of memory */ + +struct atm_aal_stats { +#define __HANDLE_ITEM(i) int i + __AAL_STAT_ITEMS +#undef __HANDLE_ITEM +}; + + +struct atm_dev_stats { + struct atm_aal_stats aal0; + struct atm_aal_stats aal34; + struct atm_aal_stats aal5; +} __ATM_API_ALIGN; + + +#define ATM_GETLINKRATE _IOW('a',ATMIOC_ITF+1,struct atmif_sioc) + /* get link rate */ +#define ATM_GETNAMES _IOW('a',ATMIOC_ITF+3,struct atm_iobuf) + /* get interface names (numbers) */ +#define ATM_GETTYPE _IOW('a',ATMIOC_ITF+4,struct atmif_sioc) + /* get interface type name */ +#define ATM_GETESI _IOW('a',ATMIOC_ITF+5,struct atmif_sioc) + /* get interface ESI */ +#define ATM_GETADDR _IOW('a',ATMIOC_ITF+6,struct atmif_sioc) + /* get itf's local ATM addr. list */ +#define ATM_RSTADDR _IOW('a',ATMIOC_ITF+7,struct atmif_sioc) + /* reset itf's ATM address list */ +#define ATM_ADDADDR _IOW('a',ATMIOC_ITF+8,struct atmif_sioc) + /* add a local ATM address */ +#define ATM_DELADDR _IOW('a',ATMIOC_ITF+9,struct atmif_sioc) + /* remove a local ATM address */ +#define ATM_GETCIRANGE _IOW('a',ATMIOC_ITF+10,struct atmif_sioc) + /* get connection identifier range */ +#define ATM_SETCIRANGE _IOW('a',ATMIOC_ITF+11,struct atmif_sioc) + /* set connection identifier range */ +#define ATM_SETESI _IOW('a',ATMIOC_ITF+12,struct atmif_sioc) + /* set interface ESI */ +#define ATM_SETESIF _IOW('a',ATMIOC_ITF+13,struct atmif_sioc) + /* force interface ESI */ +#define ATM_ADDLECSADDR _IOW('a', ATMIOC_ITF+14, struct atmif_sioc) + /* register a LECS address */ +#define ATM_DELLECSADDR _IOW('a', ATMIOC_ITF+15, struct atmif_sioc) + /* unregister a LECS address */ +#define ATM_GETLECSADDR _IOW('a', ATMIOC_ITF+16, struct atmif_sioc) + /* retrieve LECS address(es) */ + +#define ATM_GETSTAT _IOW('a',ATMIOC_SARCOM+0,struct atmif_sioc) + /* get AAL layer statistics */ +#define ATM_GETSTATZ _IOW('a',ATMIOC_SARCOM+1,struct atmif_sioc) + /* get AAL layer statistics and zero */ +#define ATM_GETLOOP _IOW('a',ATMIOC_SARCOM+2,struct atmif_sioc) + /* get loopback mode */ +#define ATM_SETLOOP _IOW('a',ATMIOC_SARCOM+3,struct atmif_sioc) + /* set loopback mode */ +#define ATM_QUERYLOOP _IOW('a',ATMIOC_SARCOM+4,struct atmif_sioc) + /* query supported loopback modes */ +#define ATM_SETSC _IOW('a',ATMIOC_SPECIAL+1,int) + /* enable or disable single-copy */ +#define ATM_SETBACKEND _IOW('a',ATMIOC_SPECIAL+2,atm_backend_t) + /* set backend handler */ +#define ATM_NEWBACKENDIF _IOW('a',ATMIOC_SPECIAL+3,atm_backend_t) + /* use backend to make new if */ +#define ATM_ADDPARTY _IOW('a', ATMIOC_SPECIAL+4,struct atm_iobuf) + /* add party to p2mp call */ +#ifdef CONFIG_COMPAT +/* It actually takes struct sockaddr_atmsvc, not struct atm_iobuf */ +#define COMPAT_ATM_ADDPARTY _IOW('a', ATMIOC_SPECIAL+4,struct compat_atm_iobuf) +#endif +#define ATM_DROPPARTY _IOW('a', ATMIOC_SPECIAL+5,int) + /* drop party from p2mp call */ + +/* + * These are backend handkers that can be set via the ATM_SETBACKEND call + * above. In the future we may support dynamic loading of these - for now, + * they're just being used to share the ATMIOC_BACKEND ioctls + */ +#define ATM_BACKEND_RAW 0 +#define ATM_BACKEND_PPP 1 /* PPPoATM - RFC2364 */ +#define ATM_BACKEND_BR2684 2 /* Bridged RFC1483/2684 */ + +/* for ATM_GETTYPE */ +#define ATM_ITFTYP_LEN 8 /* maximum length of interface type name */ + +/* + * Loopback modes for ATM_{PHY,SAR}_{GET,SET}LOOP + */ + +/* Point of loopback CPU-->SAR-->PHY-->line--> ... */ +#define __ATM_LM_NONE 0 /* no loop back ^ ^ ^ ^ */ +#define __ATM_LM_AAL 1 /* loop back PDUs --' | | | */ +#define __ATM_LM_ATM 2 /* loop back ATM cells ---' | | */ +/* RESERVED 4 loop back on PHY side ---' */ +#define __ATM_LM_PHY 8 /* loop back bits (digital) ----' | */ +#define __ATM_LM_ANALOG 16 /* loop back the analog signal --------' */ + +/* Direction of loopback */ +#define __ATM_LM_MKLOC(n) ((n)) /* Local (i.e. loop TX to RX) */ +#define __ATM_LM_MKRMT(n) ((n) << 8) /* Remote (i.e. loop RX to TX) */ + +#define __ATM_LM_XTLOC(n) ((n) & 0xff) +#define __ATM_LM_XTRMT(n) (((n) >> 8) & 0xff) + +#define ATM_LM_NONE 0 /* no loopback */ + +#define ATM_LM_LOC_AAL __ATM_LM_MKLOC(__ATM_LM_AAL) +#define ATM_LM_LOC_ATM __ATM_LM_MKLOC(__ATM_LM_ATM) +#define ATM_LM_LOC_PHY __ATM_LM_MKLOC(__ATM_LM_PHY) +#define ATM_LM_LOC_ANALOG __ATM_LM_MKLOC(__ATM_LM_ANALOG) + +#define ATM_LM_RMT_AAL __ATM_LM_MKRMT(__ATM_LM_AAL) +#define ATM_LM_RMT_ATM __ATM_LM_MKRMT(__ATM_LM_ATM) +#define ATM_LM_RMT_PHY __ATM_LM_MKRMT(__ATM_LM_PHY) +#define ATM_LM_RMT_ANALOG __ATM_LM_MKRMT(__ATM_LM_ANALOG) + +/* + * Note: ATM_LM_LOC_* and ATM_LM_RMT_* can be combined, provided that + * __ATM_LM_XTLOC(x) <= __ATM_LM_XTRMT(x) + */ + + +struct atm_iobuf { + int length; + void __user *buffer; +}; + +/* for ATM_GETCIRANGE / ATM_SETCIRANGE */ + +#define ATM_CI_MAX -1 /* use maximum range of VPI/VCI */ + +struct atm_cirange { + signed char vpi_bits; /* 1..8, ATM_CI_MAX (-1) for maximum */ + signed char vci_bits; /* 1..16, ATM_CI_MAX (-1) for maximum */ +}; + +/* for ATM_SETSC; actually taken from the ATM_VF number space */ + +#define ATM_SC_RX 1024 /* enable RX single-copy */ +#define ATM_SC_TX 2048 /* enable TX single-copy */ + +#define ATM_BACKLOG_DEFAULT 32 /* if we get more, we're likely to time out + anyway */ + +/* MF: change_qos (Modify) flags */ + +#define ATM_MF_IMMED 1 /* Block until change is effective */ +#define ATM_MF_INC_RSV 2 /* Change reservation on increase */ +#define ATM_MF_INC_SHP 4 /* Change shaping on increase */ +#define ATM_MF_DEC_RSV 8 /* Change reservation on decrease */ +#define ATM_MF_DEC_SHP 16 /* Change shaping on decrease */ +#define ATM_MF_BWD 32 /* Set the backward direction parameters */ + +#define ATM_MF_SET (ATM_MF_INC_RSV | ATM_MF_INC_SHP | ATM_MF_DEC_RSV | \ + ATM_MF_DEC_SHP | ATM_MF_BWD) + +/* + * ATM_VS_* are used to express VC state in a human-friendly way. + */ + +#define ATM_VS_IDLE 0 /* VC is not used */ +#define ATM_VS_CONNECTED 1 /* VC is connected */ +#define ATM_VS_CLOSING 2 /* VC is closing */ +#define ATM_VS_LISTEN 3 /* VC is listening for incoming setups */ +#define ATM_VS_INUSE 4 /* VC is in use (registered with atmsigd) */ +#define ATM_VS_BOUND 5 /* VC is bound */ + +#define ATM_VS2TXT_MAP \ + "IDLE", "CONNECTED", "CLOSING", "LISTEN", "INUSE", "BOUND" + +#define ATM_VF2TXT_MAP \ + "ADDR", "READY", "PARTIAL", "REGIS", \ + "RELEASED", "HASQOS", "LISTEN", "META", \ + "256", "512", "1024", "2048", \ + "SESSION", "HASSAP", "BOUND", "CLOSE" + + + +#endif /* _UAPILINUX_ATMDEV_H */ diff --git a/include/linux/atmioc.h b/include/uapi/linux/atmioc.h index 37f67aa8f1c..37f67aa8f1c 100644 --- a/include/linux/atmioc.h +++ b/include/uapi/linux/atmioc.h diff --git a/include/linux/atmlec.h b/include/uapi/linux/atmlec.h index 302791e3ab2..302791e3ab2 100644 --- a/include/linux/atmlec.h +++ b/include/uapi/linux/atmlec.h diff --git a/include/linux/atmmpc.h b/include/uapi/linux/atmmpc.h index 2aba5787fa6..2aba5787fa6 100644 --- a/include/linux/atmmpc.h +++ b/include/uapi/linux/atmmpc.h diff --git a/include/linux/atmppp.h b/include/uapi/linux/atmppp.h index 300dcce0c83..300dcce0c83 100644 --- a/include/linux/atmppp.h +++ b/include/uapi/linux/atmppp.h diff --git a/include/linux/atmsap.h b/include/uapi/linux/atmsap.h index 799b104515d..799b104515d 100644 --- a/include/linux/atmsap.h +++ b/include/uapi/linux/atmsap.h diff --git a/include/linux/atmsvc.h b/include/uapi/linux/atmsvc.h index aa71583b8da..aa71583b8da 100644 --- a/include/linux/atmsvc.h +++ b/include/uapi/linux/atmsvc.h diff --git a/include/uapi/linux/audit.h b/include/uapi/linux/audit.h new file mode 100644 index 00000000000..76352ac45f2 --- /dev/null +++ b/include/uapi/linux/audit.h @@ -0,0 +1,404 @@ +/* audit.h -- Auditing support + * + * Copyright 2003-2004 Red Hat Inc., Durham, North Carolina. + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Written by Rickard E. (Rik) Faith <faith@redhat.com> + * + */ + +#ifndef _UAPI_LINUX_AUDIT_H_ +#define _UAPI_LINUX_AUDIT_H_ + +#include <linux/types.h> +#include <linux/elf-em.h> +#include <linux/ptrace.h> + +/* The netlink messages for the audit system is divided into blocks: + * 1000 - 1099 are for commanding the audit system + * 1100 - 1199 user space trusted application messages + * 1200 - 1299 messages internal to the audit daemon + * 1300 - 1399 audit event messages + * 1400 - 1499 SE Linux use + * 1500 - 1599 kernel LSPP events + * 1600 - 1699 kernel crypto events + * 1700 - 1799 kernel anomaly records + * 1800 - 1899 kernel integrity events + * 1900 - 1999 future kernel use + * 2000 is for otherwise unclassified kernel audit messages (legacy) + * 2001 - 2099 unused (kernel) + * 2100 - 2199 user space anomaly records + * 2200 - 2299 user space actions taken in response to anomalies + * 2300 - 2399 user space generated LSPP events + * 2400 - 2499 user space crypto events + * 2500 - 2999 future user space (maybe integrity labels and related events) + * + * Messages from 1000-1199 are bi-directional. 1200-1299 & 2100 - 2999 are + * exclusively user space. 1300-2099 is kernel --> user space + * communication. + */ +#define AUDIT_GET 1000 /* Get status */ +#define AUDIT_SET 1001 /* Set status (enable/disable/auditd) */ +#define AUDIT_LIST 1002 /* List syscall rules -- deprecated */ +#define AUDIT_ADD 1003 /* Add syscall rule -- deprecated */ +#define AUDIT_DEL 1004 /* Delete syscall rule -- deprecated */ +#define AUDIT_USER 1005 /* Message from userspace -- deprecated */ +#define AUDIT_LOGIN 1006 /* Define the login id and information */ +#define AUDIT_WATCH_INS 1007 /* Insert file/dir watch entry */ +#define AUDIT_WATCH_REM 1008 /* Remove file/dir watch entry */ +#define AUDIT_WATCH_LIST 1009 /* List all file/dir watches */ +#define AUDIT_SIGNAL_INFO 1010 /* Get info about sender of signal to auditd */ +#define AUDIT_ADD_RULE 1011 /* Add syscall filtering rule */ +#define AUDIT_DEL_RULE 1012 /* Delete syscall filtering rule */ +#define AUDIT_LIST_RULES 1013 /* List syscall filtering rules */ +#define AUDIT_TRIM 1014 /* Trim junk from watched tree */ +#define AUDIT_MAKE_EQUIV 1015 /* Append to watched tree */ +#define AUDIT_TTY_GET 1016 /* Get TTY auditing status */ +#define AUDIT_TTY_SET 1017 /* Set TTY auditing status */ + +#define AUDIT_FIRST_USER_MSG 1100 /* Userspace messages mostly uninteresting to kernel */ +#define AUDIT_USER_AVC 1107 /* We filter this differently */ +#define AUDIT_USER_TTY 1124 /* Non-ICANON TTY input meaning */ +#define AUDIT_LAST_USER_MSG 1199 +#define AUDIT_FIRST_USER_MSG2 2100 /* More user space messages */ +#define AUDIT_LAST_USER_MSG2 2999 + +#define AUDIT_DAEMON_START 1200 /* Daemon startup record */ +#define AUDIT_DAEMON_END 1201 /* Daemon normal stop record */ +#define AUDIT_DAEMON_ABORT 1202 /* Daemon error stop record */ +#define AUDIT_DAEMON_CONFIG 1203 /* Daemon config change */ + +#define AUDIT_SYSCALL 1300 /* Syscall event */ +/* #define AUDIT_FS_WATCH 1301 * Deprecated */ +#define AUDIT_PATH 1302 /* Filename path information */ +#define AUDIT_IPC 1303 /* IPC record */ +#define AUDIT_SOCKETCALL 1304 /* sys_socketcall arguments */ +#define AUDIT_CONFIG_CHANGE 1305 /* Audit system configuration change */ +#define AUDIT_SOCKADDR 1306 /* sockaddr copied as syscall arg */ +#define AUDIT_CWD 1307 /* Current working directory */ +#define AUDIT_EXECVE 1309 /* execve arguments */ +#define AUDIT_IPC_SET_PERM 1311 /* IPC new permissions record type */ +#define AUDIT_MQ_OPEN 1312 /* POSIX MQ open record type */ +#define AUDIT_MQ_SENDRECV 1313 /* POSIX MQ send/receive record type */ +#define AUDIT_MQ_NOTIFY 1314 /* POSIX MQ notify record type */ +#define AUDIT_MQ_GETSETATTR 1315 /* POSIX MQ get/set attribute record type */ +#define AUDIT_KERNEL_OTHER 1316 /* For use by 3rd party modules */ +#define AUDIT_FD_PAIR 1317 /* audit record for pipe/socketpair */ +#define AUDIT_OBJ_PID 1318 /* ptrace target */ +#define AUDIT_TTY 1319 /* Input on an administrative TTY */ +#define AUDIT_EOE 1320 /* End of multi-record event */ +#define AUDIT_BPRM_FCAPS 1321 /* Information about fcaps increasing perms */ +#define AUDIT_CAPSET 1322 /* Record showing argument to sys_capset */ +#define AUDIT_MMAP 1323 /* Record showing descriptor and flags in mmap */ +#define AUDIT_NETFILTER_PKT 1324 /* Packets traversing netfilter chains */ +#define AUDIT_NETFILTER_CFG 1325 /* Netfilter chain modifications */ + +#define AUDIT_AVC 1400 /* SE Linux avc denial or grant */ +#define AUDIT_SELINUX_ERR 1401 /* Internal SE Linux Errors */ +#define AUDIT_AVC_PATH 1402 /* dentry, vfsmount pair from avc */ +#define AUDIT_MAC_POLICY_LOAD 1403 /* Policy file load */ +#define AUDIT_MAC_STATUS 1404 /* Changed enforcing,permissive,off */ +#define AUDIT_MAC_CONFIG_CHANGE 1405 /* Changes to booleans */ +#define AUDIT_MAC_UNLBL_ALLOW 1406 /* NetLabel: allow unlabeled traffic */ +#define AUDIT_MAC_CIPSOV4_ADD 1407 /* NetLabel: add CIPSOv4 DOI entry */ +#define AUDIT_MAC_CIPSOV4_DEL 1408 /* NetLabel: del CIPSOv4 DOI entry */ +#define AUDIT_MAC_MAP_ADD 1409 /* NetLabel: add LSM domain mapping */ +#define AUDIT_MAC_MAP_DEL 1410 /* NetLabel: del LSM domain mapping */ +#define AUDIT_MAC_IPSEC_ADDSA 1411 /* Not used */ +#define AUDIT_MAC_IPSEC_DELSA 1412 /* Not used */ +#define AUDIT_MAC_IPSEC_ADDSPD 1413 /* Not used */ +#define AUDIT_MAC_IPSEC_DELSPD 1414 /* Not used */ +#define AUDIT_MAC_IPSEC_EVENT 1415 /* Audit an IPSec event */ +#define AUDIT_MAC_UNLBL_STCADD 1416 /* NetLabel: add a static label */ +#define AUDIT_MAC_UNLBL_STCDEL 1417 /* NetLabel: del a static label */ + +#define AUDIT_FIRST_KERN_ANOM_MSG 1700 +#define AUDIT_LAST_KERN_ANOM_MSG 1799 +#define AUDIT_ANOM_PROMISCUOUS 1700 /* Device changed promiscuous mode */ +#define AUDIT_ANOM_ABEND 1701 /* Process ended abnormally */ +#define AUDIT_ANOM_LINK 1702 /* Suspicious use of file links */ +#define AUDIT_INTEGRITY_DATA 1800 /* Data integrity verification */ +#define AUDIT_INTEGRITY_METADATA 1801 /* Metadata integrity verification */ +#define AUDIT_INTEGRITY_STATUS 1802 /* Integrity enable status */ +#define AUDIT_INTEGRITY_HASH 1803 /* Integrity HASH type */ +#define AUDIT_INTEGRITY_PCR 1804 /* PCR invalidation msgs */ +#define AUDIT_INTEGRITY_RULE 1805 /* policy rule */ + +#define AUDIT_KERNEL 2000 /* Asynchronous audit record. NOT A REQUEST. */ + +/* Rule flags */ +#define AUDIT_FILTER_USER 0x00 /* Apply rule to user-generated messages */ +#define AUDIT_FILTER_TASK 0x01 /* Apply rule at task creation (not syscall) */ +#define AUDIT_FILTER_ENTRY 0x02 /* Apply rule at syscall entry */ +#define AUDIT_FILTER_WATCH 0x03 /* Apply rule to file system watches */ +#define AUDIT_FILTER_EXIT 0x04 /* Apply rule at syscall exit */ +#define AUDIT_FILTER_TYPE 0x05 /* Apply rule at audit_log_start */ + +#define AUDIT_NR_FILTERS 6 + +#define AUDIT_FILTER_PREPEND 0x10 /* Prepend to front of list */ + +/* Rule actions */ +#define AUDIT_NEVER 0 /* Do not build context if rule matches */ +#define AUDIT_POSSIBLE 1 /* Build context if rule matches */ +#define AUDIT_ALWAYS 2 /* Generate audit record if rule matches */ + +/* Rule structure sizes -- if these change, different AUDIT_ADD and + * AUDIT_LIST commands must be implemented. */ +#define AUDIT_MAX_FIELDS 64 +#define AUDIT_MAX_KEY_LEN 256 +#define AUDIT_BITMASK_SIZE 64 +#define AUDIT_WORD(nr) ((__u32)((nr)/32)) +#define AUDIT_BIT(nr) (1 << ((nr) - AUDIT_WORD(nr)*32)) + +#define AUDIT_SYSCALL_CLASSES 16 +#define AUDIT_CLASS_DIR_WRITE 0 +#define AUDIT_CLASS_DIR_WRITE_32 1 +#define AUDIT_CLASS_CHATTR 2 +#define AUDIT_CLASS_CHATTR_32 3 +#define AUDIT_CLASS_READ 4 +#define AUDIT_CLASS_READ_32 5 +#define AUDIT_CLASS_WRITE 6 +#define AUDIT_CLASS_WRITE_32 7 +#define AUDIT_CLASS_SIGNAL 8 +#define AUDIT_CLASS_SIGNAL_32 9 + +/* This bitmask is used to validate user input. It represents all bits that + * are currently used in an audit field constant understood by the kernel. + * If you are adding a new #define AUDIT_<whatever>, please ensure that + * AUDIT_UNUSED_BITS is updated if need be. */ +#define AUDIT_UNUSED_BITS 0x07FFFC00 + +/* AUDIT_FIELD_COMPARE rule list */ +#define AUDIT_COMPARE_UID_TO_OBJ_UID 1 +#define AUDIT_COMPARE_GID_TO_OBJ_GID 2 +#define AUDIT_COMPARE_EUID_TO_OBJ_UID 3 +#define AUDIT_COMPARE_EGID_TO_OBJ_GID 4 +#define AUDIT_COMPARE_AUID_TO_OBJ_UID 5 +#define AUDIT_COMPARE_SUID_TO_OBJ_UID 6 +#define AUDIT_COMPARE_SGID_TO_OBJ_GID 7 +#define AUDIT_COMPARE_FSUID_TO_OBJ_UID 8 +#define AUDIT_COMPARE_FSGID_TO_OBJ_GID 9 + +#define AUDIT_COMPARE_UID_TO_AUID 10 +#define AUDIT_COMPARE_UID_TO_EUID 11 +#define AUDIT_COMPARE_UID_TO_FSUID 12 +#define AUDIT_COMPARE_UID_TO_SUID 13 + +#define AUDIT_COMPARE_AUID_TO_FSUID 14 +#define AUDIT_COMPARE_AUID_TO_SUID 15 +#define AUDIT_COMPARE_AUID_TO_EUID 16 + +#define AUDIT_COMPARE_EUID_TO_SUID 17 +#define AUDIT_COMPARE_EUID_TO_FSUID 18 + +#define AUDIT_COMPARE_SUID_TO_FSUID 19 + +#define AUDIT_COMPARE_GID_TO_EGID 20 +#define AUDIT_COMPARE_GID_TO_FSGID 21 +#define AUDIT_COMPARE_GID_TO_SGID 22 + +#define AUDIT_COMPARE_EGID_TO_FSGID 23 +#define AUDIT_COMPARE_EGID_TO_SGID 24 +#define AUDIT_COMPARE_SGID_TO_FSGID 25 + +#define AUDIT_MAX_FIELD_COMPARE AUDIT_COMPARE_SGID_TO_FSGID + +/* Rule fields */ + /* These are useful when checking the + * task structure at task creation time + * (AUDIT_PER_TASK). */ +#define AUDIT_PID 0 +#define AUDIT_UID 1 +#define AUDIT_EUID 2 +#define AUDIT_SUID 3 +#define AUDIT_FSUID 4 +#define AUDIT_GID 5 +#define AUDIT_EGID 6 +#define AUDIT_SGID 7 +#define AUDIT_FSGID 8 +#define AUDIT_LOGINUID 9 +#define AUDIT_PERS 10 +#define AUDIT_ARCH 11 +#define AUDIT_MSGTYPE 12 +#define AUDIT_SUBJ_USER 13 /* security label user */ +#define AUDIT_SUBJ_ROLE 14 /* security label role */ +#define AUDIT_SUBJ_TYPE 15 /* security label type */ +#define AUDIT_SUBJ_SEN 16 /* security label sensitivity label */ +#define AUDIT_SUBJ_CLR 17 /* security label clearance label */ +#define AUDIT_PPID 18 +#define AUDIT_OBJ_USER 19 +#define AUDIT_OBJ_ROLE 20 +#define AUDIT_OBJ_TYPE 21 +#define AUDIT_OBJ_LEV_LOW 22 +#define AUDIT_OBJ_LEV_HIGH 23 + + /* These are ONLY useful when checking + * at syscall exit time (AUDIT_AT_EXIT). */ +#define AUDIT_DEVMAJOR 100 +#define AUDIT_DEVMINOR 101 +#define AUDIT_INODE 102 +#define AUDIT_EXIT 103 +#define AUDIT_SUCCESS 104 /* exit >= 0; value ignored */ +#define AUDIT_WATCH 105 +#define AUDIT_PERM 106 +#define AUDIT_DIR 107 +#define AUDIT_FILETYPE 108 +#define AUDIT_OBJ_UID 109 +#define AUDIT_OBJ_GID 110 +#define AUDIT_FIELD_COMPARE 111 + +#define AUDIT_ARG0 200 +#define AUDIT_ARG1 (AUDIT_ARG0+1) +#define AUDIT_ARG2 (AUDIT_ARG0+2) +#define AUDIT_ARG3 (AUDIT_ARG0+3) + +#define AUDIT_FILTERKEY 210 + +#define AUDIT_NEGATE 0x80000000 + +/* These are the supported operators. + * 4 2 1 8 + * = > < ? + * ---------- + * 0 0 0 0 00 nonsense + * 0 0 0 1 08 & bit mask + * 0 0 1 0 10 < + * 0 1 0 0 20 > + * 0 1 1 0 30 != + * 1 0 0 0 40 = + * 1 0 0 1 48 &= bit test + * 1 0 1 0 50 <= + * 1 1 0 0 60 >= + * 1 1 1 1 78 all operators + */ +#define AUDIT_BIT_MASK 0x08000000 +#define AUDIT_LESS_THAN 0x10000000 +#define AUDIT_GREATER_THAN 0x20000000 +#define AUDIT_NOT_EQUAL 0x30000000 +#define AUDIT_EQUAL 0x40000000 +#define AUDIT_BIT_TEST (AUDIT_BIT_MASK|AUDIT_EQUAL) +#define AUDIT_LESS_THAN_OR_EQUAL (AUDIT_LESS_THAN|AUDIT_EQUAL) +#define AUDIT_GREATER_THAN_OR_EQUAL (AUDIT_GREATER_THAN|AUDIT_EQUAL) +#define AUDIT_OPERATORS (AUDIT_EQUAL|AUDIT_NOT_EQUAL|AUDIT_BIT_MASK) + +enum { + Audit_equal, + Audit_not_equal, + Audit_bitmask, + Audit_bittest, + Audit_lt, + Audit_gt, + Audit_le, + Audit_ge, + Audit_bad +}; + +/* Status symbols */ + /* Mask values */ +#define AUDIT_STATUS_ENABLED 0x0001 +#define AUDIT_STATUS_FAILURE 0x0002 +#define AUDIT_STATUS_PID 0x0004 +#define AUDIT_STATUS_RATE_LIMIT 0x0008 +#define AUDIT_STATUS_BACKLOG_LIMIT 0x0010 + /* Failure-to-log actions */ +#define AUDIT_FAIL_SILENT 0 +#define AUDIT_FAIL_PRINTK 1 +#define AUDIT_FAIL_PANIC 2 + +/* distinguish syscall tables */ +#define __AUDIT_ARCH_64BIT 0x80000000 +#define __AUDIT_ARCH_LE 0x40000000 +#define AUDIT_ARCH_ALPHA (EM_ALPHA|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE) +#define AUDIT_ARCH_ARM (EM_ARM|__AUDIT_ARCH_LE) +#define AUDIT_ARCH_ARMEB (EM_ARM) +#define AUDIT_ARCH_CRIS (EM_CRIS|__AUDIT_ARCH_LE) +#define AUDIT_ARCH_FRV (EM_FRV) +#define AUDIT_ARCH_H8300 (EM_H8_300) +#define AUDIT_ARCH_I386 (EM_386|__AUDIT_ARCH_LE) +#define AUDIT_ARCH_IA64 (EM_IA_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE) +#define AUDIT_ARCH_M32R (EM_M32R) +#define AUDIT_ARCH_M68K (EM_68K) +#define AUDIT_ARCH_MIPS (EM_MIPS) +#define AUDIT_ARCH_MIPSEL (EM_MIPS|__AUDIT_ARCH_LE) +#define AUDIT_ARCH_MIPS64 (EM_MIPS|__AUDIT_ARCH_64BIT) +#define AUDIT_ARCH_MIPSEL64 (EM_MIPS|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE) +#define AUDIT_ARCH_OPENRISC (EM_OPENRISC) +#define AUDIT_ARCH_PARISC (EM_PARISC) +#define AUDIT_ARCH_PARISC64 (EM_PARISC|__AUDIT_ARCH_64BIT) +#define AUDIT_ARCH_PPC (EM_PPC) +#define AUDIT_ARCH_PPC64 (EM_PPC64|__AUDIT_ARCH_64BIT) +#define AUDIT_ARCH_S390 (EM_S390) +#define AUDIT_ARCH_S390X (EM_S390|__AUDIT_ARCH_64BIT) +#define AUDIT_ARCH_SH (EM_SH) +#define AUDIT_ARCH_SHEL (EM_SH|__AUDIT_ARCH_LE) +#define AUDIT_ARCH_SH64 (EM_SH|__AUDIT_ARCH_64BIT) +#define AUDIT_ARCH_SHEL64 (EM_SH|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE) +#define AUDIT_ARCH_SPARC (EM_SPARC) +#define AUDIT_ARCH_SPARC64 (EM_SPARCV9|__AUDIT_ARCH_64BIT) +#define AUDIT_ARCH_X86_64 (EM_X86_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE) + +#define AUDIT_PERM_EXEC 1 +#define AUDIT_PERM_WRITE 2 +#define AUDIT_PERM_READ 4 +#define AUDIT_PERM_ATTR 8 + +struct audit_status { + __u32 mask; /* Bit mask for valid entries */ + __u32 enabled; /* 1 = enabled, 0 = disabled */ + __u32 failure; /* Failure-to-log action */ + __u32 pid; /* pid of auditd process */ + __u32 rate_limit; /* messages rate limit (per second) */ + __u32 backlog_limit; /* waiting messages limit */ + __u32 lost; /* messages lost */ + __u32 backlog; /* messages waiting in queue */ +}; + +struct audit_tty_status { + __u32 enabled; /* 1 = enabled, 0 = disabled */ +}; + +/* audit_rule_data supports filter rules with both integer and string + * fields. It corresponds with AUDIT_ADD_RULE, AUDIT_DEL_RULE and + * AUDIT_LIST_RULES requests. + */ +struct audit_rule_data { + __u32 flags; /* AUDIT_PER_{TASK,CALL}, AUDIT_PREPEND */ + __u32 action; /* AUDIT_NEVER, AUDIT_POSSIBLE, AUDIT_ALWAYS */ + __u32 field_count; + __u32 mask[AUDIT_BITMASK_SIZE]; /* syscall(s) affected */ + __u32 fields[AUDIT_MAX_FIELDS]; + __u32 values[AUDIT_MAX_FIELDS]; + __u32 fieldflags[AUDIT_MAX_FIELDS]; + __u32 buflen; /* total length of string fields */ + char buf[0]; /* string fields buffer */ +}; + +/* audit_rule is supported to maintain backward compatibility with + * userspace. It supports integer fields only and corresponds to + * AUDIT_ADD, AUDIT_DEL and AUDIT_LIST requests. + */ +struct audit_rule { /* for AUDIT_LIST, AUDIT_ADD, and AUDIT_DEL */ + __u32 flags; /* AUDIT_PER_{TASK,CALL}, AUDIT_PREPEND */ + __u32 action; /* AUDIT_NEVER, AUDIT_POSSIBLE, AUDIT_ALWAYS */ + __u32 field_count; + __u32 mask[AUDIT_BITMASK_SIZE]; + __u32 fields[AUDIT_MAX_FIELDS]; + __u32 values[AUDIT_MAX_FIELDS]; +}; + +#endif /* _UAPI_LINUX_AUDIT_H_ */ diff --git a/include/uapi/linux/auto_fs.h b/include/uapi/linux/auto_fs.h new file mode 100644 index 00000000000..77cdba9df27 --- /dev/null +++ b/include/uapi/linux/auto_fs.h @@ -0,0 +1,83 @@ +/* -*- linux-c -*- ------------------------------------------------------- * + * + * linux/include/linux/auto_fs.h + * + * Copyright 1997 Transmeta Corporation - All Rights Reserved + * + * This file is part of the Linux kernel and is made available under + * the terms of the GNU General Public License, version 2, or at your + * option, any later version, incorporated herein by reference. + * + * ----------------------------------------------------------------------- */ + + +#ifndef _UAPI_LINUX_AUTO_FS_H +#define _UAPI_LINUX_AUTO_FS_H + +#include <linux/types.h> +#ifndef __KERNEL__ +#include <sys/ioctl.h> +#endif /* __KERNEL__ */ + + +/* This file describes autofs v3 */ +#define AUTOFS_PROTO_VERSION 3 + +/* Range of protocol versions defined */ +#define AUTOFS_MAX_PROTO_VERSION AUTOFS_PROTO_VERSION +#define AUTOFS_MIN_PROTO_VERSION AUTOFS_PROTO_VERSION + +/* + * Architectures where both 32- and 64-bit binaries can be executed + * on 64-bit kernels need this. This keeps the structure format + * uniform, and makes sure the wait_queue_token isn't too big to be + * passed back down to the kernel. + * + * This assumes that on these architectures: + * mode 32 bit 64 bit + * ------------------------- + * int 32 bit 32 bit + * long 32 bit 64 bit + * + * If so, 32-bit user-space code should be backwards compatible. + */ + +#if defined(__sparc__) || defined(__mips__) || defined(__x86_64__) \ + || defined(__powerpc__) || defined(__s390__) +typedef unsigned int autofs_wqt_t; +#else +typedef unsigned long autofs_wqt_t; +#endif + +/* Packet types */ +#define autofs_ptype_missing 0 /* Missing entry (mount request) */ +#define autofs_ptype_expire 1 /* Expire entry (umount request) */ + +struct autofs_packet_hdr { + int proto_version; /* Protocol version */ + int type; /* Type of packet */ +}; + +struct autofs_packet_missing { + struct autofs_packet_hdr hdr; + autofs_wqt_t wait_queue_token; + int len; + char name[NAME_MAX+1]; +}; + +/* v3 expire (via ioctl) */ +struct autofs_packet_expire { + struct autofs_packet_hdr hdr; + int len; + char name[NAME_MAX+1]; +}; + +#define AUTOFS_IOC_READY _IO(0x93,0x60) +#define AUTOFS_IOC_FAIL _IO(0x93,0x61) +#define AUTOFS_IOC_CATATONIC _IO(0x93,0x62) +#define AUTOFS_IOC_PROTOVER _IOR(0x93,0x63,int) +#define AUTOFS_IOC_SETTIMEOUT32 _IOWR(0x93,0x64,compat_ulong_t) +#define AUTOFS_IOC_SETTIMEOUT _IOWR(0x93,0x64,unsigned long) +#define AUTOFS_IOC_EXPIRE _IOR(0x93,0x65,struct autofs_packet_expire) + +#endif /* _UAPI_LINUX_AUTO_FS_H */ diff --git a/include/linux/auto_fs4.h b/include/uapi/linux/auto_fs4.h index e02982fa295..e02982fa295 100644 --- a/include/linux/auto_fs4.h +++ b/include/uapi/linux/auto_fs4.h diff --git a/include/uapi/linux/auxvec.h b/include/uapi/linux/auxvec.h new file mode 100644 index 00000000000..61594d598e7 --- /dev/null +++ b/include/uapi/linux/auxvec.h @@ -0,0 +1,35 @@ +#ifndef _UAPI_LINUX_AUXVEC_H +#define _UAPI_LINUX_AUXVEC_H + +#include <asm/auxvec.h> + +/* Symbolic values for the entries in the auxiliary table + put on the initial stack */ +#define AT_NULL 0 /* end of vector */ +#define AT_IGNORE 1 /* entry should be ignored */ +#define AT_EXECFD 2 /* file descriptor of program */ +#define AT_PHDR 3 /* program headers for program */ +#define AT_PHENT 4 /* size of program header entry */ +#define AT_PHNUM 5 /* number of program headers */ +#define AT_PAGESZ 6 /* system page size */ +#define AT_BASE 7 /* base address of interpreter */ +#define AT_FLAGS 8 /* flags */ +#define AT_ENTRY 9 /* entry point of program */ +#define AT_NOTELF 10 /* program is not ELF */ +#define AT_UID 11 /* real uid */ +#define AT_EUID 12 /* effective uid */ +#define AT_GID 13 /* real gid */ +#define AT_EGID 14 /* effective gid */ +#define AT_PLATFORM 15 /* string identifying CPU for optimizations */ +#define AT_HWCAP 16 /* arch dependent hints at CPU capabilities */ +#define AT_CLKTCK 17 /* frequency at which times() increments */ +/* AT_* values 18 through 22 are reserved */ +#define AT_SECURE 23 /* secure mode boolean */ +#define AT_BASE_PLATFORM 24 /* string identifying real platform, may + * differ from AT_PLATFORM. */ +#define AT_RANDOM 25 /* address of 16 random bytes */ + +#define AT_EXECFN 31 /* filename of program */ + + +#endif /* _UAPI_LINUX_AUXVEC_H */ diff --git a/include/linux/ax25.h b/include/uapi/linux/ax25.h index 74c89a41732..74c89a41732 100644 --- a/include/linux/ax25.h +++ b/include/uapi/linux/ax25.h diff --git a/include/linux/b1lli.h b/include/uapi/linux/b1lli.h index 713f712685d..713f712685d 100644 --- a/include/linux/b1lli.h +++ b/include/uapi/linux/b1lli.h diff --git a/include/linux/baycom.h b/include/uapi/linux/baycom.h index 81249e029da..81249e029da 100644 --- a/include/linux/baycom.h +++ b/include/uapi/linux/baycom.h diff --git a/include/linux/bfs_fs.h b/include/uapi/linux/bfs_fs.h index 1c0b355aa51..1c0b355aa51 100644 --- a/include/linux/bfs_fs.h +++ b/include/uapi/linux/bfs_fs.h diff --git a/include/uapi/linux/binfmts.h b/include/uapi/linux/binfmts.h new file mode 100644 index 00000000000..4eb5972867c --- /dev/null +++ b/include/uapi/linux/binfmts.h @@ -0,0 +1,20 @@ +#ifndef _UAPI_LINUX_BINFMTS_H +#define _UAPI_LINUX_BINFMTS_H + +#include <linux/capability.h> + +struct pt_regs; + +/* + * These are the maximum length and maximum number of strings passed to the + * execve() system call. MAX_ARG_STRLEN is essentially random but serves to + * prevent the kernel from being unduly impacted by misaddressed pointers. + * MAX_ARG_STRINGS is chosen to fit in a signed 32-bit integer. + */ +#define MAX_ARG_STRLEN (PAGE_SIZE * 32) +#define MAX_ARG_STRINGS 0x7FFFFFFF + +/* sizeof(linux_binprm->buf) */ +#define BINPRM_BUF_SIZE 128 + +#endif /* _UAPI_LINUX_BINFMTS_H */ diff --git a/include/linux/blkpg.h b/include/uapi/linux/blkpg.h index a8519446c11..a8519446c11 100644 --- a/include/linux/blkpg.h +++ b/include/uapi/linux/blkpg.h diff --git a/include/uapi/linux/blktrace_api.h b/include/uapi/linux/blktrace_api.h new file mode 100644 index 00000000000..c590ca6bfbd --- /dev/null +++ b/include/uapi/linux/blktrace_api.h @@ -0,0 +1,142 @@ +#ifndef _UAPIBLKTRACE_H +#define _UAPIBLKTRACE_H + +#include <linux/types.h> + +/* + * Trace categories + */ +enum blktrace_cat { + BLK_TC_READ = 1 << 0, /* reads */ + BLK_TC_WRITE = 1 << 1, /* writes */ + BLK_TC_FLUSH = 1 << 2, /* flush */ + BLK_TC_SYNC = 1 << 3, /* sync IO */ + BLK_TC_SYNCIO = BLK_TC_SYNC, + BLK_TC_QUEUE = 1 << 4, /* queueing/merging */ + BLK_TC_REQUEUE = 1 << 5, /* requeueing */ + BLK_TC_ISSUE = 1 << 6, /* issue */ + BLK_TC_COMPLETE = 1 << 7, /* completions */ + BLK_TC_FS = 1 << 8, /* fs requests */ + BLK_TC_PC = 1 << 9, /* pc requests */ + BLK_TC_NOTIFY = 1 << 10, /* special message */ + BLK_TC_AHEAD = 1 << 11, /* readahead */ + BLK_TC_META = 1 << 12, /* metadata */ + BLK_TC_DISCARD = 1 << 13, /* discard requests */ + BLK_TC_DRV_DATA = 1 << 14, /* binary per-driver data */ + BLK_TC_FUA = 1 << 15, /* fua requests */ + + BLK_TC_END = 1 << 15, /* we've run out of bits! */ +}; + +#define BLK_TC_SHIFT (16) +#define BLK_TC_ACT(act) ((act) << BLK_TC_SHIFT) + +/* + * Basic trace actions + */ +enum blktrace_act { + __BLK_TA_QUEUE = 1, /* queued */ + __BLK_TA_BACKMERGE, /* back merged to existing rq */ + __BLK_TA_FRONTMERGE, /* front merge to existing rq */ + __BLK_TA_GETRQ, /* allocated new request */ + __BLK_TA_SLEEPRQ, /* sleeping on rq allocation */ + __BLK_TA_REQUEUE, /* request requeued */ + __BLK_TA_ISSUE, /* sent to driver */ + __BLK_TA_COMPLETE, /* completed by driver */ + __BLK_TA_PLUG, /* queue was plugged */ + __BLK_TA_UNPLUG_IO, /* queue was unplugged by io */ + __BLK_TA_UNPLUG_TIMER, /* queue was unplugged by timer */ + __BLK_TA_INSERT, /* insert request */ + __BLK_TA_SPLIT, /* bio was split */ + __BLK_TA_BOUNCE, /* bio was bounced */ + __BLK_TA_REMAP, /* bio was remapped */ + __BLK_TA_ABORT, /* request aborted */ + __BLK_TA_DRV_DATA, /* driver-specific binary data */ +}; + +/* + * Notify events. + */ +enum blktrace_notify { + __BLK_TN_PROCESS = 0, /* establish pid/name mapping */ + __BLK_TN_TIMESTAMP, /* include system clock */ + __BLK_TN_MESSAGE, /* Character string message */ +}; + + +/* + * Trace actions in full. Additionally, read or write is masked + */ +#define BLK_TA_QUEUE (__BLK_TA_QUEUE | BLK_TC_ACT(BLK_TC_QUEUE)) +#define BLK_TA_BACKMERGE (__BLK_TA_BACKMERGE | BLK_TC_ACT(BLK_TC_QUEUE)) +#define BLK_TA_FRONTMERGE (__BLK_TA_FRONTMERGE | BLK_TC_ACT(BLK_TC_QUEUE)) +#define BLK_TA_GETRQ (__BLK_TA_GETRQ | BLK_TC_ACT(BLK_TC_QUEUE)) +#define BLK_TA_SLEEPRQ (__BLK_TA_SLEEPRQ | BLK_TC_ACT(BLK_TC_QUEUE)) +#define BLK_TA_REQUEUE (__BLK_TA_REQUEUE | BLK_TC_ACT(BLK_TC_REQUEUE)) +#define BLK_TA_ISSUE (__BLK_TA_ISSUE | BLK_TC_ACT(BLK_TC_ISSUE)) +#define BLK_TA_COMPLETE (__BLK_TA_COMPLETE| BLK_TC_ACT(BLK_TC_COMPLETE)) +#define BLK_TA_PLUG (__BLK_TA_PLUG | BLK_TC_ACT(BLK_TC_QUEUE)) +#define BLK_TA_UNPLUG_IO (__BLK_TA_UNPLUG_IO | BLK_TC_ACT(BLK_TC_QUEUE)) +#define BLK_TA_UNPLUG_TIMER (__BLK_TA_UNPLUG_TIMER | BLK_TC_ACT(BLK_TC_QUEUE)) +#define BLK_TA_INSERT (__BLK_TA_INSERT | BLK_TC_ACT(BLK_TC_QUEUE)) +#define BLK_TA_SPLIT (__BLK_TA_SPLIT) +#define BLK_TA_BOUNCE (__BLK_TA_BOUNCE) +#define BLK_TA_REMAP (__BLK_TA_REMAP | BLK_TC_ACT(BLK_TC_QUEUE)) +#define BLK_TA_ABORT (__BLK_TA_ABORT | BLK_TC_ACT(BLK_TC_QUEUE)) +#define BLK_TA_DRV_DATA (__BLK_TA_DRV_DATA | BLK_TC_ACT(BLK_TC_DRV_DATA)) + +#define BLK_TN_PROCESS (__BLK_TN_PROCESS | BLK_TC_ACT(BLK_TC_NOTIFY)) +#define BLK_TN_TIMESTAMP (__BLK_TN_TIMESTAMP | BLK_TC_ACT(BLK_TC_NOTIFY)) +#define BLK_TN_MESSAGE (__BLK_TN_MESSAGE | BLK_TC_ACT(BLK_TC_NOTIFY)) + +#define BLK_IO_TRACE_MAGIC 0x65617400 +#define BLK_IO_TRACE_VERSION 0x07 + +/* + * The trace itself + */ +struct blk_io_trace { + __u32 magic; /* MAGIC << 8 | version */ + __u32 sequence; /* event number */ + __u64 time; /* in microseconds */ + __u64 sector; /* disk offset */ + __u32 bytes; /* transfer length */ + __u32 action; /* what happened */ + __u32 pid; /* who did it */ + __u32 device; /* device number */ + __u32 cpu; /* on what cpu did it happen */ + __u16 error; /* completion error */ + __u16 pdu_len; /* length of data after this trace */ +}; + +/* + * The remap event + */ +struct blk_io_trace_remap { + __be32 device_from; + __be32 device_to; + __be64 sector_from; +}; + +enum { + Blktrace_setup = 1, + Blktrace_running, + Blktrace_stopped, +}; + +#define BLKTRACE_BDEV_SIZE 32 + +/* + * User setup structure passed with BLKTRACESTART + */ +struct blk_user_trace_setup { + char name[BLKTRACE_BDEV_SIZE]; /* output */ + __u16 act_mask; /* input */ + __u32 buf_size; /* input */ + __u32 buf_nr; /* input */ + __u64 start_lba; + __u64 end_lba; + __u32 pid; +}; + +#endif /* _UAPIBLKTRACE_H */ diff --git a/include/linux/bpqether.h b/include/uapi/linux/bpqether.h index a6c35e1a89a..a6c35e1a89a 100644 --- a/include/linux/bpqether.h +++ b/include/uapi/linux/bpqether.h diff --git a/include/uapi/linux/bsg.h b/include/uapi/linux/bsg.h new file mode 100644 index 00000000000..7a12e1c0f37 --- /dev/null +++ b/include/uapi/linux/bsg.h @@ -0,0 +1,65 @@ +#ifndef _UAPIBSG_H +#define _UAPIBSG_H + +#include <linux/types.h> + +#define BSG_PROTOCOL_SCSI 0 + +#define BSG_SUB_PROTOCOL_SCSI_CMD 0 +#define BSG_SUB_PROTOCOL_SCSI_TMF 1 +#define BSG_SUB_PROTOCOL_SCSI_TRANSPORT 2 + +/* + * For flags member below + * sg.h sg_io_hdr also has bits defined for it's flags member. However + * none of these bits are implemented/used by bsg. The bits below are + * allocated to not conflict with sg.h ones anyway. + */ +#define BSG_FLAG_Q_AT_TAIL 0x10 /* default, == 0 at this bit, is Q_AT_HEAD */ + +struct sg_io_v4 { + __s32 guard; /* [i] 'Q' to differentiate from v3 */ + __u32 protocol; /* [i] 0 -> SCSI , .... */ + __u32 subprotocol; /* [i] 0 -> SCSI command, 1 -> SCSI task + management function, .... */ + + __u32 request_len; /* [i] in bytes */ + __u64 request; /* [i], [*i] {SCSI: cdb} */ + __u64 request_tag; /* [i] {SCSI: task tag (only if flagged)} */ + __u32 request_attr; /* [i] {SCSI: task attribute} */ + __u32 request_priority; /* [i] {SCSI: task priority} */ + __u32 request_extra; /* [i] {spare, for padding} */ + __u32 max_response_len; /* [i] in bytes */ + __u64 response; /* [i], [*o] {SCSI: (auto)sense data} */ + + /* "dout_": data out (to device); "din_": data in (from device) */ + __u32 dout_iovec_count; /* [i] 0 -> "flat" dout transfer else + dout_xfer points to array of iovec */ + __u32 dout_xfer_len; /* [i] bytes to be transferred to device */ + __u32 din_iovec_count; /* [i] 0 -> "flat" din transfer */ + __u32 din_xfer_len; /* [i] bytes to be transferred from device */ + __u64 dout_xferp; /* [i], [*i] */ + __u64 din_xferp; /* [i], [*o] */ + + __u32 timeout; /* [i] units: millisecond */ + __u32 flags; /* [i] bit mask */ + __u64 usr_ptr; /* [i->o] unused internally */ + __u32 spare_in; /* [i] */ + + __u32 driver_status; /* [o] 0 -> ok */ + __u32 transport_status; /* [o] 0 -> ok */ + __u32 device_status; /* [o] {SCSI: command completion status} */ + __u32 retry_delay; /* [o] {SCSI: status auxiliary information} */ + __u32 info; /* [o] additional information */ + __u32 duration; /* [o] time to complete, in milliseconds */ + __u32 response_len; /* [o] bytes of response actually written */ + __s32 din_resid; /* [o] din_xfer_len - actual_din_xfer_len */ + __s32 dout_resid; /* [o] dout_xfer_len - actual_dout_xfer_len */ + __u64 generated_tag; /* [o] {SCSI: transport generated task tag} */ + __u32 spare_out; /* [o] */ + + __u32 padding; +}; + + +#endif /* _UAPIBSG_H */ diff --git a/include/uapi/linux/byteorder/Kbuild b/include/uapi/linux/byteorder/Kbuild index aafaa5aa54d..619225b9ff2 100644 --- a/include/uapi/linux/byteorder/Kbuild +++ b/include/uapi/linux/byteorder/Kbuild @@ -1 +1,3 @@ # UAPI Header export list +header-y += big_endian.h +header-y += little_endian.h diff --git a/include/uapi/linux/byteorder/big_endian.h b/include/uapi/linux/byteorder/big_endian.h new file mode 100644 index 00000000000..67237445009 --- /dev/null +++ b/include/uapi/linux/byteorder/big_endian.h @@ -0,0 +1,105 @@ +#ifndef _UAPI_LINUX_BYTEORDER_BIG_ENDIAN_H +#define _UAPI_LINUX_BYTEORDER_BIG_ENDIAN_H + +#ifndef __BIG_ENDIAN +#define __BIG_ENDIAN 4321 +#endif +#ifndef __BIG_ENDIAN_BITFIELD +#define __BIG_ENDIAN_BITFIELD +#endif + +#include <linux/types.h> +#include <linux/swab.h> + +#define __constant_htonl(x) ((__force __be32)(__u32)(x)) +#define __constant_ntohl(x) ((__force __u32)(__be32)(x)) +#define __constant_htons(x) ((__force __be16)(__u16)(x)) +#define __constant_ntohs(x) ((__force __u16)(__be16)(x)) +#define __constant_cpu_to_le64(x) ((__force __le64)___constant_swab64((x))) +#define __constant_le64_to_cpu(x) ___constant_swab64((__force __u64)(__le64)(x)) +#define __constant_cpu_to_le32(x) ((__force __le32)___constant_swab32((x))) +#define __constant_le32_to_cpu(x) ___constant_swab32((__force __u32)(__le32)(x)) +#define __constant_cpu_to_le16(x) ((__force __le16)___constant_swab16((x))) +#define __constant_le16_to_cpu(x) ___constant_swab16((__force __u16)(__le16)(x)) +#define __constant_cpu_to_be64(x) ((__force __be64)(__u64)(x)) +#define __constant_be64_to_cpu(x) ((__force __u64)(__be64)(x)) +#define __constant_cpu_to_be32(x) ((__force __be32)(__u32)(x)) +#define __constant_be32_to_cpu(x) ((__force __u32)(__be32)(x)) +#define __constant_cpu_to_be16(x) ((__force __be16)(__u16)(x)) +#define __constant_be16_to_cpu(x) ((__force __u16)(__be16)(x)) +#define __cpu_to_le64(x) ((__force __le64)__swab64((x))) +#define __le64_to_cpu(x) __swab64((__force __u64)(__le64)(x)) +#define __cpu_to_le32(x) ((__force __le32)__swab32((x))) +#define __le32_to_cpu(x) __swab32((__force __u32)(__le32)(x)) +#define __cpu_to_le16(x) ((__force __le16)__swab16((x))) +#define __le16_to_cpu(x) __swab16((__force __u16)(__le16)(x)) +#define __cpu_to_be64(x) ((__force __be64)(__u64)(x)) +#define __be64_to_cpu(x) ((__force __u64)(__be64)(x)) +#define __cpu_to_be32(x) ((__force __be32)(__u32)(x)) +#define __be32_to_cpu(x) ((__force __u32)(__be32)(x)) +#define __cpu_to_be16(x) ((__force __be16)(__u16)(x)) +#define __be16_to_cpu(x) ((__force __u16)(__be16)(x)) + +static inline __le64 __cpu_to_le64p(const __u64 *p) +{ + return (__force __le64)__swab64p(p); +} +static inline __u64 __le64_to_cpup(const __le64 *p) +{ + return __swab64p((__u64 *)p); +} +static inline __le32 __cpu_to_le32p(const __u32 *p) +{ + return (__force __le32)__swab32p(p); +} +static inline __u32 __le32_to_cpup(const __le32 *p) +{ + return __swab32p((__u32 *)p); +} +static inline __le16 __cpu_to_le16p(const __u16 *p) +{ + return (__force __le16)__swab16p(p); +} +static inline __u16 __le16_to_cpup(const __le16 *p) +{ + return __swab16p((__u16 *)p); +} +static inline __be64 __cpu_to_be64p(const __u64 *p) +{ + return (__force __be64)*p; +} +static inline __u64 __be64_to_cpup(const __be64 *p) +{ + return (__force __u64)*p; +} +static inline __be32 __cpu_to_be32p(const __u32 *p) +{ + return (__force __be32)*p; +} +static inline __u32 __be32_to_cpup(const __be32 *p) +{ + return (__force __u32)*p; +} +static inline __be16 __cpu_to_be16p(const __u16 *p) +{ + return (__force __be16)*p; +} +static inline __u16 __be16_to_cpup(const __be16 *p) +{ + return (__force __u16)*p; +} +#define __cpu_to_le64s(x) __swab64s((x)) +#define __le64_to_cpus(x) __swab64s((x)) +#define __cpu_to_le32s(x) __swab32s((x)) +#define __le32_to_cpus(x) __swab32s((x)) +#define __cpu_to_le16s(x) __swab16s((x)) +#define __le16_to_cpus(x) __swab16s((x)) +#define __cpu_to_be64s(x) do { (void)(x); } while (0) +#define __be64_to_cpus(x) do { (void)(x); } while (0) +#define __cpu_to_be32s(x) do { (void)(x); } while (0) +#define __be32_to_cpus(x) do { (void)(x); } while (0) +#define __cpu_to_be16s(x) do { (void)(x); } while (0) +#define __be16_to_cpus(x) do { (void)(x); } while (0) + + +#endif /* _UAPI_LINUX_BYTEORDER_BIG_ENDIAN_H */ diff --git a/include/uapi/linux/byteorder/little_endian.h b/include/uapi/linux/byteorder/little_endian.h new file mode 100644 index 00000000000..d876736a001 --- /dev/null +++ b/include/uapi/linux/byteorder/little_endian.h @@ -0,0 +1,105 @@ +#ifndef _UAPI_LINUX_BYTEORDER_LITTLE_ENDIAN_H +#define _UAPI_LINUX_BYTEORDER_LITTLE_ENDIAN_H + +#ifndef __LITTLE_ENDIAN +#define __LITTLE_ENDIAN 1234 +#endif +#ifndef __LITTLE_ENDIAN_BITFIELD +#define __LITTLE_ENDIAN_BITFIELD +#endif + +#include <linux/types.h> +#include <linux/swab.h> + +#define __constant_htonl(x) ((__force __be32)___constant_swab32((x))) +#define __constant_ntohl(x) ___constant_swab32((__force __be32)(x)) +#define __constant_htons(x) ((__force __be16)___constant_swab16((x))) +#define __constant_ntohs(x) ___constant_swab16((__force __be16)(x)) +#define __constant_cpu_to_le64(x) ((__force __le64)(__u64)(x)) +#define __constant_le64_to_cpu(x) ((__force __u64)(__le64)(x)) +#define __constant_cpu_to_le32(x) ((__force __le32)(__u32)(x)) +#define __constant_le32_to_cpu(x) ((__force __u32)(__le32)(x)) +#define __constant_cpu_to_le16(x) ((__force __le16)(__u16)(x)) +#define __constant_le16_to_cpu(x) ((__force __u16)(__le16)(x)) +#define __constant_cpu_to_be64(x) ((__force __be64)___constant_swab64((x))) +#define __constant_be64_to_cpu(x) ___constant_swab64((__force __u64)(__be64)(x)) +#define __constant_cpu_to_be32(x) ((__force __be32)___constant_swab32((x))) +#define __constant_be32_to_cpu(x) ___constant_swab32((__force __u32)(__be32)(x)) +#define __constant_cpu_to_be16(x) ((__force __be16)___constant_swab16((x))) +#define __constant_be16_to_cpu(x) ___constant_swab16((__force __u16)(__be16)(x)) +#define __cpu_to_le64(x) ((__force __le64)(__u64)(x)) +#define __le64_to_cpu(x) ((__force __u64)(__le64)(x)) +#define __cpu_to_le32(x) ((__force __le32)(__u32)(x)) +#define __le32_to_cpu(x) ((__force __u32)(__le32)(x)) +#define __cpu_to_le16(x) ((__force __le16)(__u16)(x)) +#define __le16_to_cpu(x) ((__force __u16)(__le16)(x)) +#define __cpu_to_be64(x) ((__force __be64)__swab64((x))) +#define __be64_to_cpu(x) __swab64((__force __u64)(__be64)(x)) +#define __cpu_to_be32(x) ((__force __be32)__swab32((x))) +#define __be32_to_cpu(x) __swab32((__force __u32)(__be32)(x)) +#define __cpu_to_be16(x) ((__force __be16)__swab16((x))) +#define __be16_to_cpu(x) __swab16((__force __u16)(__be16)(x)) + +static inline __le64 __cpu_to_le64p(const __u64 *p) +{ + return (__force __le64)*p; +} +static inline __u64 __le64_to_cpup(const __le64 *p) +{ + return (__force __u64)*p; +} +static inline __le32 __cpu_to_le32p(const __u32 *p) +{ + return (__force __le32)*p; +} +static inline __u32 __le32_to_cpup(const __le32 *p) +{ + return (__force __u32)*p; +} +static inline __le16 __cpu_to_le16p(const __u16 *p) +{ + return (__force __le16)*p; +} +static inline __u16 __le16_to_cpup(const __le16 *p) +{ + return (__force __u16)*p; +} +static inline __be64 __cpu_to_be64p(const __u64 *p) +{ + return (__force __be64)__swab64p(p); +} +static inline __u64 __be64_to_cpup(const __be64 *p) +{ + return __swab64p((__u64 *)p); +} +static inline __be32 __cpu_to_be32p(const __u32 *p) +{ + return (__force __be32)__swab32p(p); +} +static inline __u32 __be32_to_cpup(const __be32 *p) +{ + return __swab32p((__u32 *)p); +} +static inline __be16 __cpu_to_be16p(const __u16 *p) +{ + return (__force __be16)__swab16p(p); +} +static inline __u16 __be16_to_cpup(const __be16 *p) +{ + return __swab16p((__u16 *)p); +} +#define __cpu_to_le64s(x) do { (void)(x); } while (0) +#define __le64_to_cpus(x) do { (void)(x); } while (0) +#define __cpu_to_le32s(x) do { (void)(x); } while (0) +#define __le32_to_cpus(x) do { (void)(x); } while (0) +#define __cpu_to_le16s(x) do { (void)(x); } while (0) +#define __le16_to_cpus(x) do { (void)(x); } while (0) +#define __cpu_to_be64s(x) __swab64s((x)) +#define __be64_to_cpus(x) __swab64s((x)) +#define __cpu_to_be32s(x) __swab32s((x)) +#define __be32_to_cpus(x) __swab32s((x)) +#define __cpu_to_be16s(x) __swab16s((x)) +#define __be16_to_cpus(x) __swab16s((x)) + + +#endif /* _UAPI_LINUX_BYTEORDER_LITTLE_ENDIAN_H */ diff --git a/include/linux/can.h b/include/uapi/linux/can.h index e52958d7c2d..e52958d7c2d 100644 --- a/include/linux/can.h +++ b/include/uapi/linux/can.h diff --git a/include/uapi/linux/can/Kbuild b/include/uapi/linux/can/Kbuild index aafaa5aa54d..21c91bf25a2 100644 --- a/include/uapi/linux/can/Kbuild +++ b/include/uapi/linux/can/Kbuild @@ -1 +1,6 @@ # UAPI Header export list +header-y += bcm.h +header-y += error.h +header-y += gw.h +header-y += netlink.h +header-y += raw.h diff --git a/include/linux/can/bcm.h b/include/uapi/linux/can/bcm.h index 3ebe387fea4..3ebe387fea4 100644 --- a/include/linux/can/bcm.h +++ b/include/uapi/linux/can/bcm.h diff --git a/include/linux/can/error.h b/include/uapi/linux/can/error.h index 7b7148bded7..7b7148bded7 100644 --- a/include/linux/can/error.h +++ b/include/uapi/linux/can/error.h diff --git a/include/linux/can/gw.h b/include/uapi/linux/can/gw.h index 8e1db18c3cb..8e1db18c3cb 100644 --- a/include/linux/can/gw.h +++ b/include/uapi/linux/can/gw.h diff --git a/include/linux/can/netlink.h b/include/uapi/linux/can/netlink.h index 14966ddb7df..14966ddb7df 100644 --- a/include/linux/can/netlink.h +++ b/include/uapi/linux/can/netlink.h diff --git a/include/linux/can/raw.h b/include/uapi/linux/can/raw.h index a814062b071..a814062b071 100644 --- a/include/linux/can/raw.h +++ b/include/uapi/linux/can/raw.h diff --git a/include/uapi/linux/capability.h b/include/uapi/linux/capability.h new file mode 100644 index 00000000000..ba478fa3012 --- /dev/null +++ b/include/uapi/linux/capability.h @@ -0,0 +1,358 @@ +/* + * This is <linux/capability.h> + * + * Andrew G. Morgan <morgan@kernel.org> + * Alexander Kjeldaas <astor@guardian.no> + * with help from Aleph1, Roland Buresund and Andrew Main. + * + * See here for the libcap library ("POSIX draft" compliance): + * + * ftp://www.kernel.org/pub/linux/libs/security/linux-privs/kernel-2.6/ + */ + +#ifndef _UAPI_LINUX_CAPABILITY_H +#define _UAPI_LINUX_CAPABILITY_H + +#include <linux/types.h> + +struct task_struct; + +/* User-level do most of the mapping between kernel and user + capabilities based on the version tag given by the kernel. The + kernel might be somewhat backwards compatible, but don't bet on + it. */ + +/* Note, cap_t, is defined by POSIX (draft) to be an "opaque" pointer to + a set of three capability sets. The transposition of 3*the + following structure to such a composite is better handled in a user + library since the draft standard requires the use of malloc/free + etc.. */ + +#define _LINUX_CAPABILITY_VERSION_1 0x19980330 +#define _LINUX_CAPABILITY_U32S_1 1 + +#define _LINUX_CAPABILITY_VERSION_2 0x20071026 /* deprecated - use v3 */ +#define _LINUX_CAPABILITY_U32S_2 2 + +#define _LINUX_CAPABILITY_VERSION_3 0x20080522 +#define _LINUX_CAPABILITY_U32S_3 2 + +typedef struct __user_cap_header_struct { + __u32 version; + int pid; +} __user *cap_user_header_t; + +typedef struct __user_cap_data_struct { + __u32 effective; + __u32 permitted; + __u32 inheritable; +} __user *cap_user_data_t; + + +#define VFS_CAP_REVISION_MASK 0xFF000000 +#define VFS_CAP_REVISION_SHIFT 24 +#define VFS_CAP_FLAGS_MASK ~VFS_CAP_REVISION_MASK +#define VFS_CAP_FLAGS_EFFECTIVE 0x000001 + +#define VFS_CAP_REVISION_1 0x01000000 +#define VFS_CAP_U32_1 1 +#define XATTR_CAPS_SZ_1 (sizeof(__le32)*(1 + 2*VFS_CAP_U32_1)) + +#define VFS_CAP_REVISION_2 0x02000000 +#define VFS_CAP_U32_2 2 +#define XATTR_CAPS_SZ_2 (sizeof(__le32)*(1 + 2*VFS_CAP_U32_2)) + +#define XATTR_CAPS_SZ XATTR_CAPS_SZ_2 +#define VFS_CAP_U32 VFS_CAP_U32_2 +#define VFS_CAP_REVISION VFS_CAP_REVISION_2 + +struct vfs_cap_data { + __le32 magic_etc; /* Little endian */ + struct { + __le32 permitted; /* Little endian */ + __le32 inheritable; /* Little endian */ + } data[VFS_CAP_U32]; +}; + +#ifndef __KERNEL__ + +/* + * Backwardly compatible definition for source code - trapped in a + * 32-bit world. If you find you need this, please consider using + * libcap to untrap yourself... + */ +#define _LINUX_CAPABILITY_VERSION _LINUX_CAPABILITY_VERSION_1 +#define _LINUX_CAPABILITY_U32S _LINUX_CAPABILITY_U32S_1 + +#endif + + +/** + ** POSIX-draft defined capabilities. + **/ + +/* In a system with the [_POSIX_CHOWN_RESTRICTED] option defined, this + overrides the restriction of changing file ownership and group + ownership. */ + +#define CAP_CHOWN 0 + +/* Override all DAC access, including ACL execute access if + [_POSIX_ACL] is defined. Excluding DAC access covered by + CAP_LINUX_IMMUTABLE. */ + +#define CAP_DAC_OVERRIDE 1 + +/* Overrides all DAC restrictions regarding read and search on files + and directories, including ACL restrictions if [_POSIX_ACL] is + defined. Excluding DAC access covered by CAP_LINUX_IMMUTABLE. */ + +#define CAP_DAC_READ_SEARCH 2 + +/* Overrides all restrictions about allowed operations on files, where + file owner ID must be equal to the user ID, except where CAP_FSETID + is applicable. It doesn't override MAC and DAC restrictions. */ + +#define CAP_FOWNER 3 + +/* Overrides the following restrictions that the effective user ID + shall match the file owner ID when setting the S_ISUID and S_ISGID + bits on that file; that the effective group ID (or one of the + supplementary group IDs) shall match the file owner ID when setting + the S_ISGID bit on that file; that the S_ISUID and S_ISGID bits are + cleared on successful return from chown(2) (not implemented). */ + +#define CAP_FSETID 4 + +/* Overrides the restriction that the real or effective user ID of a + process sending a signal must match the real or effective user ID + of the process receiving the signal. */ + +#define CAP_KILL 5 + +/* Allows setgid(2) manipulation */ +/* Allows setgroups(2) */ +/* Allows forged gids on socket credentials passing. */ + +#define CAP_SETGID 6 + +/* Allows set*uid(2) manipulation (including fsuid). */ +/* Allows forged pids on socket credentials passing. */ + +#define CAP_SETUID 7 + + +/** + ** Linux-specific capabilities + **/ + +/* Without VFS support for capabilities: + * Transfer any capability in your permitted set to any pid, + * remove any capability in your permitted set from any pid + * With VFS support for capabilities (neither of above, but) + * Add any capability from current's capability bounding set + * to the current process' inheritable set + * Allow taking bits out of capability bounding set + * Allow modification of the securebits for a process + */ + +#define CAP_SETPCAP 8 + +/* Allow modification of S_IMMUTABLE and S_APPEND file attributes */ + +#define CAP_LINUX_IMMUTABLE 9 + +/* Allows binding to TCP/UDP sockets below 1024 */ +/* Allows binding to ATM VCIs below 32 */ + +#define CAP_NET_BIND_SERVICE 10 + +/* Allow broadcasting, listen to multicast */ + +#define CAP_NET_BROADCAST 11 + +/* Allow interface configuration */ +/* Allow administration of IP firewall, masquerading and accounting */ +/* Allow setting debug option on sockets */ +/* Allow modification of routing tables */ +/* Allow setting arbitrary process / process group ownership on + sockets */ +/* Allow binding to any address for transparent proxying (also via NET_RAW) */ +/* Allow setting TOS (type of service) */ +/* Allow setting promiscuous mode */ +/* Allow clearing driver statistics */ +/* Allow multicasting */ +/* Allow read/write of device-specific registers */ +/* Allow activation of ATM control sockets */ + +#define CAP_NET_ADMIN 12 + +/* Allow use of RAW sockets */ +/* Allow use of PACKET sockets */ +/* Allow binding to any address for transparent proxying (also via NET_ADMIN) */ + +#define CAP_NET_RAW 13 + +/* Allow locking of shared memory segments */ +/* Allow mlock and mlockall (which doesn't really have anything to do + with IPC) */ + +#define CAP_IPC_LOCK 14 + +/* Override IPC ownership checks */ + +#define CAP_IPC_OWNER 15 + +/* Insert and remove kernel modules - modify kernel without limit */ +#define CAP_SYS_MODULE 16 + +/* Allow ioperm/iopl access */ +/* Allow sending USB messages to any device via /proc/bus/usb */ + +#define CAP_SYS_RAWIO 17 + +/* Allow use of chroot() */ + +#define CAP_SYS_CHROOT 18 + +/* Allow ptrace() of any process */ + +#define CAP_SYS_PTRACE 19 + +/* Allow configuration of process accounting */ + +#define CAP_SYS_PACCT 20 + +/* Allow configuration of the secure attention key */ +/* Allow administration of the random device */ +/* Allow examination and configuration of disk quotas */ +/* Allow setting the domainname */ +/* Allow setting the hostname */ +/* Allow calling bdflush() */ +/* Allow mount() and umount(), setting up new smb connection */ +/* Allow some autofs root ioctls */ +/* Allow nfsservctl */ +/* Allow VM86_REQUEST_IRQ */ +/* Allow to read/write pci config on alpha */ +/* Allow irix_prctl on mips (setstacksize) */ +/* Allow flushing all cache on m68k (sys_cacheflush) */ +/* Allow removing semaphores */ +/* Used instead of CAP_CHOWN to "chown" IPC message queues, semaphores + and shared memory */ +/* Allow locking/unlocking of shared memory segment */ +/* Allow turning swap on/off */ +/* Allow forged pids on socket credentials passing */ +/* Allow setting readahead and flushing buffers on block devices */ +/* Allow setting geometry in floppy driver */ +/* Allow turning DMA on/off in xd driver */ +/* Allow administration of md devices (mostly the above, but some + extra ioctls) */ +/* Allow tuning the ide driver */ +/* Allow access to the nvram device */ +/* Allow administration of apm_bios, serial and bttv (TV) device */ +/* Allow manufacturer commands in isdn CAPI support driver */ +/* Allow reading non-standardized portions of pci configuration space */ +/* Allow DDI debug ioctl on sbpcd driver */ +/* Allow setting up serial ports */ +/* Allow sending raw qic-117 commands */ +/* Allow enabling/disabling tagged queuing on SCSI controllers and sending + arbitrary SCSI commands */ +/* Allow setting encryption key on loopback filesystem */ +/* Allow setting zone reclaim policy */ + +#define CAP_SYS_ADMIN 21 + +/* Allow use of reboot() */ + +#define CAP_SYS_BOOT 22 + +/* Allow raising priority and setting priority on other (different + UID) processes */ +/* Allow use of FIFO and round-robin (realtime) scheduling on own + processes and setting the scheduling algorithm used by another + process. */ +/* Allow setting cpu affinity on other processes */ + +#define CAP_SYS_NICE 23 + +/* Override resource limits. Set resource limits. */ +/* Override quota limits. */ +/* Override reserved space on ext2 filesystem */ +/* Modify data journaling mode on ext3 filesystem (uses journaling + resources) */ +/* NOTE: ext2 honors fsuid when checking for resource overrides, so + you can override using fsuid too */ +/* Override size restrictions on IPC message queues */ +/* Allow more than 64hz interrupts from the real-time clock */ +/* Override max number of consoles on console allocation */ +/* Override max number of keymaps */ + +#define CAP_SYS_RESOURCE 24 + +/* Allow manipulation of system clock */ +/* Allow irix_stime on mips */ +/* Allow setting the real-time clock */ + +#define CAP_SYS_TIME 25 + +/* Allow configuration of tty devices */ +/* Allow vhangup() of tty */ + +#define CAP_SYS_TTY_CONFIG 26 + +/* Allow the privileged aspects of mknod() */ + +#define CAP_MKNOD 27 + +/* Allow taking of leases on files */ + +#define CAP_LEASE 28 + +#define CAP_AUDIT_WRITE 29 + +#define CAP_AUDIT_CONTROL 30 + +#define CAP_SETFCAP 31 + +/* Override MAC access. + The base kernel enforces no MAC policy. + An LSM may enforce a MAC policy, and if it does and it chooses + to implement capability based overrides of that policy, this is + the capability it should use to do so. */ + +#define CAP_MAC_OVERRIDE 32 + +/* Allow MAC configuration or state changes. + The base kernel requires no MAC configuration. + An LSM may enforce a MAC policy, and if it does and it chooses + to implement capability based checks on modifications to that + policy or the data required to maintain it, this is the + capability it should use to do so. */ + +#define CAP_MAC_ADMIN 33 + +/* Allow configuring the kernel's syslog (printk behaviour) */ + +#define CAP_SYSLOG 34 + +/* Allow triggering something that will wake the system */ + +#define CAP_WAKE_ALARM 35 + +/* Allow preventing system suspends */ + +#define CAP_BLOCK_SUSPEND 36 + +#define CAP_LAST_CAP CAP_BLOCK_SUSPEND + +#define cap_valid(x) ((x) >= 0 && (x) <= CAP_LAST_CAP) + +/* + * Bit location of each capability (used by user-space library and kernel) + */ + +#define CAP_TO_INDEX(x) ((x) >> 5) /* 1 << 5 == bits in __u32 */ +#define CAP_TO_MASK(x) (1 << ((x) & 31)) /* mask for indexed __u32 */ + + +#endif /* _UAPI_LINUX_CAPABILITY_H */ diff --git a/include/linux/capi.h b/include/uapi/linux/capi.h index 65100d6cb89..65100d6cb89 100644 --- a/include/linux/capi.h +++ b/include/uapi/linux/capi.h diff --git a/include/linux/cciss_defs.h b/include/uapi/linux/cciss_defs.h index 316b670d4e3..316b670d4e3 100644 --- a/include/linux/cciss_defs.h +++ b/include/uapi/linux/cciss_defs.h diff --git a/include/uapi/linux/cciss_ioctl.h b/include/uapi/linux/cciss_ioctl.h new file mode 100644 index 00000000000..bb0b9ddf7ee --- /dev/null +++ b/include/uapi/linux/cciss_ioctl.h @@ -0,0 +1,88 @@ +#ifndef _UAPICCISS_IOCTLH +#define _UAPICCISS_IOCTLH + +#include <linux/types.h> +#include <linux/ioctl.h> +#include <linux/cciss_defs.h> + +#define CCISS_IOC_MAGIC 'B' + + +typedef struct _cciss_pci_info_struct +{ + unsigned char bus; + unsigned char dev_fn; + unsigned short domain; + __u32 board_id; +} cciss_pci_info_struct; + +typedef struct _cciss_coalint_struct +{ + __u32 delay; + __u32 count; +} cciss_coalint_struct; + +typedef char NodeName_type[16]; + +typedef __u32 Heartbeat_type; + +#define CISS_PARSCSIU2 0x0001 +#define CISS_PARCSCIU3 0x0002 +#define CISS_FIBRE1G 0x0100 +#define CISS_FIBRE2G 0x0200 +typedef __u32 BusTypes_type; + +typedef char FirmwareVer_type[4]; +typedef __u32 DriverVer_type; + +#define MAX_KMALLOC_SIZE 128000 + +typedef struct _IOCTL_Command_struct { + LUNAddr_struct LUN_info; + RequestBlock_struct Request; + ErrorInfo_struct error_info; + WORD buf_size; /* size in bytes of the buf */ + BYTE __user *buf; +} IOCTL_Command_struct; + +typedef struct _BIG_IOCTL_Command_struct { + LUNAddr_struct LUN_info; + RequestBlock_struct Request; + ErrorInfo_struct error_info; + DWORD malloc_size; /* < MAX_KMALLOC_SIZE in cciss.c */ + DWORD buf_size; /* size in bytes of the buf */ + /* < malloc_size * MAXSGENTRIES */ + BYTE __user *buf; +} BIG_IOCTL_Command_struct; + +typedef struct _LogvolInfo_struct{ + __u32 LunID; + int num_opens; /* number of opens on the logical volume */ + int num_parts; /* number of partitions configured on logvol */ +} LogvolInfo_struct; + +#define CCISS_GETPCIINFO _IOR(CCISS_IOC_MAGIC, 1, cciss_pci_info_struct) + +#define CCISS_GETINTINFO _IOR(CCISS_IOC_MAGIC, 2, cciss_coalint_struct) +#define CCISS_SETINTINFO _IOW(CCISS_IOC_MAGIC, 3, cciss_coalint_struct) + +#define CCISS_GETNODENAME _IOR(CCISS_IOC_MAGIC, 4, NodeName_type) +#define CCISS_SETNODENAME _IOW(CCISS_IOC_MAGIC, 5, NodeName_type) + +#define CCISS_GETHEARTBEAT _IOR(CCISS_IOC_MAGIC, 6, Heartbeat_type) +#define CCISS_GETBUSTYPES _IOR(CCISS_IOC_MAGIC, 7, BusTypes_type) +#define CCISS_GETFIRMVER _IOR(CCISS_IOC_MAGIC, 8, FirmwareVer_type) +#define CCISS_GETDRIVVER _IOR(CCISS_IOC_MAGIC, 9, DriverVer_type) +#define CCISS_REVALIDVOLS _IO(CCISS_IOC_MAGIC, 10) +#define CCISS_PASSTHRU _IOWR(CCISS_IOC_MAGIC, 11, IOCTL_Command_struct) +#define CCISS_DEREGDISK _IO(CCISS_IOC_MAGIC, 12) + +/* no longer used... use REGNEWD instead */ +#define CCISS_REGNEWDISK _IOW(CCISS_IOC_MAGIC, 13, int) + +#define CCISS_REGNEWD _IO(CCISS_IOC_MAGIC, 14) +#define CCISS_RESCANDISK _IO(CCISS_IOC_MAGIC, 16) +#define CCISS_GETLUNINFO _IOR(CCISS_IOC_MAGIC, 17, LogvolInfo_struct) +#define CCISS_BIG_PASSTHRU _IOWR(CCISS_IOC_MAGIC, 18, BIG_IOCTL_Command_struct) + +#endif /* _UAPICCISS_IOCTLH */ diff --git a/include/uapi/linux/cdrom.h b/include/uapi/linux/cdrom.h new file mode 100644 index 00000000000..898b866b300 --- /dev/null +++ b/include/uapi/linux/cdrom.h @@ -0,0 +1,912 @@ +/* + * -- <linux/cdrom.h> + * General header file for linux CD-ROM drivers + * Copyright (C) 1992 David Giller, rafetmad@oxy.edu + * 1994, 1995 Eberhard Mönkeberg, emoenke@gwdg.de + * 1996 David van Leeuwen, david@tm.tno.nl + * 1997, 1998 Erik Andersen, andersee@debian.org + * 1998-2002 Jens Axboe, axboe@suse.de + */ + +#ifndef _UAPI_LINUX_CDROM_H +#define _UAPI_LINUX_CDROM_H + +#include <linux/types.h> +#include <asm/byteorder.h> + +/******************************************************* + * As of Linux 2.1.x, all Linux CD-ROM application programs will use this + * (and only this) include file. It is my hope to provide Linux with + * a uniform interface between software accessing CD-ROMs and the various + * device drivers that actually talk to the drives. There may still be + * 23 different kinds of strange CD-ROM drives, but at least there will + * now be one, and only one, Linux CD-ROM interface. + * + * Additionally, as of Linux 2.1.x, all Linux application programs + * should use the O_NONBLOCK option when opening a CD-ROM device + * for subsequent ioctl commands. This allows for neat system errors + * like "No medium found" or "Wrong medium type" upon attempting to + * mount or play an empty slot, mount an audio disc, or play a data disc. + * Generally, changing an application program to support O_NONBLOCK + * is as easy as the following: + * - drive = open("/dev/cdrom", O_RDONLY); + * + drive = open("/dev/cdrom", O_RDONLY | O_NONBLOCK); + * It is worth the small change. + * + * Patches for many common CD programs (provided by David A. van Leeuwen) + * can be found at: ftp://ftp.gwdg.de/pub/linux/cdrom/drivers/cm206/ + * + *******************************************************/ + +/* When a driver supports a certain function, but the cdrom drive we are + * using doesn't, we will return the error EDRIVE_CANT_DO_THIS. We will + * borrow the "Operation not supported" error from the network folks to + * accomplish this. Maybe someday we will get a more targeted error code, + * but this will do for now... */ +#define EDRIVE_CANT_DO_THIS EOPNOTSUPP + +/******************************************************* + * The CD-ROM IOCTL commands -- these should be supported by + * all the various cdrom drivers. For the CD-ROM ioctls, we + * will commandeer byte 0x53, or 'S'. + *******************************************************/ +#define CDROMPAUSE 0x5301 /* Pause Audio Operation */ +#define CDROMRESUME 0x5302 /* Resume paused Audio Operation */ +#define CDROMPLAYMSF 0x5303 /* Play Audio MSF (struct cdrom_msf) */ +#define CDROMPLAYTRKIND 0x5304 /* Play Audio Track/index + (struct cdrom_ti) */ +#define CDROMREADTOCHDR 0x5305 /* Read TOC header + (struct cdrom_tochdr) */ +#define CDROMREADTOCENTRY 0x5306 /* Read TOC entry + (struct cdrom_tocentry) */ +#define CDROMSTOP 0x5307 /* Stop the cdrom drive */ +#define CDROMSTART 0x5308 /* Start the cdrom drive */ +#define CDROMEJECT 0x5309 /* Ejects the cdrom media */ +#define CDROMVOLCTRL 0x530a /* Control output volume + (struct cdrom_volctrl) */ +#define CDROMSUBCHNL 0x530b /* Read subchannel data + (struct cdrom_subchnl) */ +#define CDROMREADMODE2 0x530c /* Read CDROM mode 2 data (2336 Bytes) + (struct cdrom_read) */ +#define CDROMREADMODE1 0x530d /* Read CDROM mode 1 data (2048 Bytes) + (struct cdrom_read) */ +#define CDROMREADAUDIO 0x530e /* (struct cdrom_read_audio) */ +#define CDROMEJECT_SW 0x530f /* enable(1)/disable(0) auto-ejecting */ +#define CDROMMULTISESSION 0x5310 /* Obtain the start-of-last-session + address of multi session disks + (struct cdrom_multisession) */ +#define CDROM_GET_MCN 0x5311 /* Obtain the "Universal Product Code" + if available (struct cdrom_mcn) */ +#define CDROM_GET_UPC CDROM_GET_MCN /* This one is deprecated, + but here anyway for compatibility */ +#define CDROMRESET 0x5312 /* hard-reset the drive */ +#define CDROMVOLREAD 0x5313 /* Get the drive's volume setting + (struct cdrom_volctrl) */ +#define CDROMREADRAW 0x5314 /* read data in raw mode (2352 Bytes) + (struct cdrom_read) */ +/* + * These ioctls are used only used in aztcd.c and optcd.c + */ +#define CDROMREADCOOKED 0x5315 /* read data in cooked mode */ +#define CDROMSEEK 0x5316 /* seek msf address */ + +/* + * This ioctl is only used by the scsi-cd driver. + It is for playing audio in logical block addressing mode. + */ +#define CDROMPLAYBLK 0x5317 /* (struct cdrom_blk) */ + +/* + * These ioctls are only used in optcd.c + */ +#define CDROMREADALL 0x5318 /* read all 2646 bytes */ + +/* + * These ioctls are (now) only in ide-cd.c for controlling + * drive spindown time. They should be implemented in the + * Uniform driver, via generic packet commands, GPCMD_MODE_SELECT_10, + * GPCMD_MODE_SENSE_10 and the GPMODE_POWER_PAGE... + * -Erik + */ +#define CDROMGETSPINDOWN 0x531d +#define CDROMSETSPINDOWN 0x531e + +/* + * These ioctls are implemented through the uniform CD-ROM driver + * They _will_ be adopted by all CD-ROM drivers, when all the CD-ROM + * drivers are eventually ported to the uniform CD-ROM driver interface. + */ +#define CDROMCLOSETRAY 0x5319 /* pendant of CDROMEJECT */ +#define CDROM_SET_OPTIONS 0x5320 /* Set behavior options */ +#define CDROM_CLEAR_OPTIONS 0x5321 /* Clear behavior options */ +#define CDROM_SELECT_SPEED 0x5322 /* Set the CD-ROM speed */ +#define CDROM_SELECT_DISC 0x5323 /* Select disc (for juke-boxes) */ +#define CDROM_MEDIA_CHANGED 0x5325 /* Check is media changed */ +#define CDROM_DRIVE_STATUS 0x5326 /* Get tray position, etc. */ +#define CDROM_DISC_STATUS 0x5327 /* Get disc type, etc. */ +#define CDROM_CHANGER_NSLOTS 0x5328 /* Get number of slots */ +#define CDROM_LOCKDOOR 0x5329 /* lock or unlock door */ +#define CDROM_DEBUG 0x5330 /* Turn debug messages on/off */ +#define CDROM_GET_CAPABILITY 0x5331 /* get capabilities */ + +/* Note that scsi/scsi_ioctl.h also uses 0x5382 - 0x5386. + * Future CDROM ioctls should be kept below 0x537F + */ + +/* This ioctl is only used by sbpcd at the moment */ +#define CDROMAUDIOBUFSIZ 0x5382 /* set the audio buffer size */ + /* conflict with SCSI_IOCTL_GET_IDLUN */ + +/* DVD-ROM Specific ioctls */ +#define DVD_READ_STRUCT 0x5390 /* Read structure */ +#define DVD_WRITE_STRUCT 0x5391 /* Write structure */ +#define DVD_AUTH 0x5392 /* Authentication */ + +#define CDROM_SEND_PACKET 0x5393 /* send a packet to the drive */ +#define CDROM_NEXT_WRITABLE 0x5394 /* get next writable block */ +#define CDROM_LAST_WRITTEN 0x5395 /* get last block written on disc */ + +/******************************************************* + * CDROM IOCTL structures + *******************************************************/ + +/* Address in MSF format */ +struct cdrom_msf0 +{ + __u8 minute; + __u8 second; + __u8 frame; +}; + +/* Address in either MSF or logical format */ +union cdrom_addr +{ + struct cdrom_msf0 msf; + int lba; +}; + +/* This struct is used by the CDROMPLAYMSF ioctl */ +struct cdrom_msf +{ + __u8 cdmsf_min0; /* start minute */ + __u8 cdmsf_sec0; /* start second */ + __u8 cdmsf_frame0; /* start frame */ + __u8 cdmsf_min1; /* end minute */ + __u8 cdmsf_sec1; /* end second */ + __u8 cdmsf_frame1; /* end frame */ +}; + +/* This struct is used by the CDROMPLAYTRKIND ioctl */ +struct cdrom_ti +{ + __u8 cdti_trk0; /* start track */ + __u8 cdti_ind0; /* start index */ + __u8 cdti_trk1; /* end track */ + __u8 cdti_ind1; /* end index */ +}; + +/* This struct is used by the CDROMREADTOCHDR ioctl */ +struct cdrom_tochdr +{ + __u8 cdth_trk0; /* start track */ + __u8 cdth_trk1; /* end track */ +}; + +/* This struct is used by the CDROMVOLCTRL and CDROMVOLREAD ioctls */ +struct cdrom_volctrl +{ + __u8 channel0; + __u8 channel1; + __u8 channel2; + __u8 channel3; +}; + +/* This struct is used by the CDROMSUBCHNL ioctl */ +struct cdrom_subchnl +{ + __u8 cdsc_format; + __u8 cdsc_audiostatus; + __u8 cdsc_adr: 4; + __u8 cdsc_ctrl: 4; + __u8 cdsc_trk; + __u8 cdsc_ind; + union cdrom_addr cdsc_absaddr; + union cdrom_addr cdsc_reladdr; +}; + + +/* This struct is used by the CDROMREADTOCENTRY ioctl */ +struct cdrom_tocentry +{ + __u8 cdte_track; + __u8 cdte_adr :4; + __u8 cdte_ctrl :4; + __u8 cdte_format; + union cdrom_addr cdte_addr; + __u8 cdte_datamode; +}; + +/* This struct is used by the CDROMREADMODE1, and CDROMREADMODE2 ioctls */ +struct cdrom_read +{ + int cdread_lba; + char *cdread_bufaddr; + int cdread_buflen; +}; + +/* This struct is used by the CDROMREADAUDIO ioctl */ +struct cdrom_read_audio +{ + union cdrom_addr addr; /* frame address */ + __u8 addr_format; /* CDROM_LBA or CDROM_MSF */ + int nframes; /* number of 2352-byte-frames to read at once */ + __u8 __user *buf; /* frame buffer (size: nframes*2352 bytes) */ +}; + +/* This struct is used with the CDROMMULTISESSION ioctl */ +struct cdrom_multisession +{ + union cdrom_addr addr; /* frame address: start-of-last-session + (not the new "frame 16"!). Only valid + if the "xa_flag" is true. */ + __u8 xa_flag; /* 1: "is XA disk" */ + __u8 addr_format; /* CDROM_LBA or CDROM_MSF */ +}; + +/* This struct is used with the CDROM_GET_MCN ioctl. + * Very few audio discs actually have Universal Product Code information, + * which should just be the Medium Catalog Number on the box. Also note + * that the way the codeis written on CD is _not_ uniform across all discs! + */ +struct cdrom_mcn +{ + __u8 medium_catalog_number[14]; /* 13 ASCII digits, null-terminated */ +}; + +/* This is used by the CDROMPLAYBLK ioctl */ +struct cdrom_blk +{ + unsigned from; + unsigned short len; +}; + +#define CDROM_PACKET_SIZE 12 + +#define CGC_DATA_UNKNOWN 0 +#define CGC_DATA_WRITE 1 +#define CGC_DATA_READ 2 +#define CGC_DATA_NONE 3 + +/* for CDROM_PACKET_COMMAND ioctl */ +struct cdrom_generic_command +{ + unsigned char cmd[CDROM_PACKET_SIZE]; + unsigned char __user *buffer; + unsigned int buflen; + int stat; + struct request_sense __user *sense; + unsigned char data_direction; + int quiet; + int timeout; + void __user *reserved[1]; /* unused, actually */ +}; + +/* + * A CD-ROM physical sector size is 2048, 2052, 2056, 2324, 2332, 2336, + * 2340, or 2352 bytes long. + +* Sector types of the standard CD-ROM data formats: + * + * format sector type user data size (bytes) + * ----------------------------------------------------------------------------- + * 1 (Red Book) CD-DA 2352 (CD_FRAMESIZE_RAW) + * 2 (Yellow Book) Mode1 Form1 2048 (CD_FRAMESIZE) + * 3 (Yellow Book) Mode1 Form2 2336 (CD_FRAMESIZE_RAW0) + * 4 (Green Book) Mode2 Form1 2048 (CD_FRAMESIZE) + * 5 (Green Book) Mode2 Form2 2328 (2324+4 spare bytes) + * + * + * The layout of the standard CD-ROM data formats: + * ----------------------------------------------------------------------------- + * - audio (red): | audio_sample_bytes | + * | 2352 | + * + * - data (yellow, mode1): | sync - head - data - EDC - zero - ECC | + * | 12 - 4 - 2048 - 4 - 8 - 276 | + * + * - data (yellow, mode2): | sync - head - data | + * | 12 - 4 - 2336 | + * + * - XA data (green, mode2 form1): | sync - head - sub - data - EDC - ECC | + * | 12 - 4 - 8 - 2048 - 4 - 276 | + * + * - XA data (green, mode2 form2): | sync - head - sub - data - Spare | + * | 12 - 4 - 8 - 2324 - 4 | + * + */ + +/* Some generally useful CD-ROM information -- mostly based on the above */ +#define CD_MINS 74 /* max. minutes per CD, not really a limit */ +#define CD_SECS 60 /* seconds per minute */ +#define CD_FRAMES 75 /* frames per second */ +#define CD_SYNC_SIZE 12 /* 12 sync bytes per raw data frame */ +#define CD_MSF_OFFSET 150 /* MSF numbering offset of first frame */ +#define CD_CHUNK_SIZE 24 /* lowest-level "data bytes piece" */ +#define CD_NUM_OF_CHUNKS 98 /* chunks per frame */ +#define CD_FRAMESIZE_SUB 96 /* subchannel data "frame" size */ +#define CD_HEAD_SIZE 4 /* header (address) bytes per raw data frame */ +#define CD_SUBHEAD_SIZE 8 /* subheader bytes per raw XA data frame */ +#define CD_EDC_SIZE 4 /* bytes EDC per most raw data frame types */ +#define CD_ZERO_SIZE 8 /* bytes zero per yellow book mode 1 frame */ +#define CD_ECC_SIZE 276 /* bytes ECC per most raw data frame types */ +#define CD_FRAMESIZE 2048 /* bytes per frame, "cooked" mode */ +#define CD_FRAMESIZE_RAW 2352 /* bytes per frame, "raw" mode */ +#define CD_FRAMESIZE_RAWER 2646 /* The maximum possible returned bytes */ +/* most drives don't deliver everything: */ +#define CD_FRAMESIZE_RAW1 (CD_FRAMESIZE_RAW-CD_SYNC_SIZE) /*2340*/ +#define CD_FRAMESIZE_RAW0 (CD_FRAMESIZE_RAW-CD_SYNC_SIZE-CD_HEAD_SIZE) /*2336*/ + +#define CD_XA_HEAD (CD_HEAD_SIZE+CD_SUBHEAD_SIZE) /* "before data" part of raw XA frame */ +#define CD_XA_TAIL (CD_EDC_SIZE+CD_ECC_SIZE) /* "after data" part of raw XA frame */ +#define CD_XA_SYNC_HEAD (CD_SYNC_SIZE+CD_XA_HEAD) /* sync bytes + header of XA frame */ + +/* CD-ROM address types (cdrom_tocentry.cdte_format) */ +#define CDROM_LBA 0x01 /* "logical block": first frame is #0 */ +#define CDROM_MSF 0x02 /* "minute-second-frame": binary, not bcd here! */ + +/* bit to tell whether track is data or audio (cdrom_tocentry.cdte_ctrl) */ +#define CDROM_DATA_TRACK 0x04 + +/* The leadout track is always 0xAA, regardless of # of tracks on disc */ +#define CDROM_LEADOUT 0xAA + +/* audio states (from SCSI-2, but seen with other drives, too) */ +#define CDROM_AUDIO_INVALID 0x00 /* audio status not supported */ +#define CDROM_AUDIO_PLAY 0x11 /* audio play operation in progress */ +#define CDROM_AUDIO_PAUSED 0x12 /* audio play operation paused */ +#define CDROM_AUDIO_COMPLETED 0x13 /* audio play successfully completed */ +#define CDROM_AUDIO_ERROR 0x14 /* audio play stopped due to error */ +#define CDROM_AUDIO_NO_STATUS 0x15 /* no current audio status to return */ + +/* capability flags used with the uniform CD-ROM driver */ +#define CDC_CLOSE_TRAY 0x1 /* caddy systems _can't_ close */ +#define CDC_OPEN_TRAY 0x2 /* but _can_ eject. */ +#define CDC_LOCK 0x4 /* disable manual eject */ +#define CDC_SELECT_SPEED 0x8 /* programmable speed */ +#define CDC_SELECT_DISC 0x10 /* select disc from juke-box */ +#define CDC_MULTI_SESSION 0x20 /* read sessions>1 */ +#define CDC_MCN 0x40 /* Medium Catalog Number */ +#define CDC_MEDIA_CHANGED 0x80 /* media changed */ +#define CDC_PLAY_AUDIO 0x100 /* audio functions */ +#define CDC_RESET 0x200 /* hard reset device */ +#define CDC_DRIVE_STATUS 0x800 /* driver implements drive status */ +#define CDC_GENERIC_PACKET 0x1000 /* driver implements generic packets */ +#define CDC_CD_R 0x2000 /* drive is a CD-R */ +#define CDC_CD_RW 0x4000 /* drive is a CD-RW */ +#define CDC_DVD 0x8000 /* drive is a DVD */ +#define CDC_DVD_R 0x10000 /* drive can write DVD-R */ +#define CDC_DVD_RAM 0x20000 /* drive can write DVD-RAM */ +#define CDC_MO_DRIVE 0x40000 /* drive is an MO device */ +#define CDC_MRW 0x80000 /* drive can read MRW */ +#define CDC_MRW_W 0x100000 /* drive can write MRW */ +#define CDC_RAM 0x200000 /* ok to open for WRITE */ + +/* drive status possibilities returned by CDROM_DRIVE_STATUS ioctl */ +#define CDS_NO_INFO 0 /* if not implemented */ +#define CDS_NO_DISC 1 +#define CDS_TRAY_OPEN 2 +#define CDS_DRIVE_NOT_READY 3 +#define CDS_DISC_OK 4 + +/* return values for the CDROM_DISC_STATUS ioctl */ +/* can also return CDS_NO_[INFO|DISC], from above */ +#define CDS_AUDIO 100 +#define CDS_DATA_1 101 +#define CDS_DATA_2 102 +#define CDS_XA_2_1 103 +#define CDS_XA_2_2 104 +#define CDS_MIXED 105 + +/* User-configurable behavior options for the uniform CD-ROM driver */ +#define CDO_AUTO_CLOSE 0x1 /* close tray on first open() */ +#define CDO_AUTO_EJECT 0x2 /* open tray on last release() */ +#define CDO_USE_FFLAGS 0x4 /* use O_NONBLOCK information on open */ +#define CDO_LOCK 0x8 /* lock tray on open files */ +#define CDO_CHECK_TYPE 0x10 /* check type on open for data */ + +/* Special codes used when specifying changer slots. */ +#define CDSL_NONE (INT_MAX-1) +#define CDSL_CURRENT INT_MAX + +/* For partition based multisession access. IDE can handle 64 partitions + * per drive - SCSI CD-ROM's use minors to differentiate between the + * various drives, so we can't do multisessions the same way there. + * Use the -o session=x option to mount on them. + */ +#define CD_PART_MAX 64 +#define CD_PART_MASK (CD_PART_MAX - 1) + +/********************************************************************* + * Generic Packet commands, MMC commands, and such + *********************************************************************/ + + /* The generic packet command opcodes for CD/DVD Logical Units, + * From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */ +#define GPCMD_BLANK 0xa1 +#define GPCMD_CLOSE_TRACK 0x5b +#define GPCMD_FLUSH_CACHE 0x35 +#define GPCMD_FORMAT_UNIT 0x04 +#define GPCMD_GET_CONFIGURATION 0x46 +#define GPCMD_GET_EVENT_STATUS_NOTIFICATION 0x4a +#define GPCMD_GET_PERFORMANCE 0xac +#define GPCMD_INQUIRY 0x12 +#define GPCMD_LOAD_UNLOAD 0xa6 +#define GPCMD_MECHANISM_STATUS 0xbd +#define GPCMD_MODE_SELECT_10 0x55 +#define GPCMD_MODE_SENSE_10 0x5a +#define GPCMD_PAUSE_RESUME 0x4b +#define GPCMD_PLAY_AUDIO_10 0x45 +#define GPCMD_PLAY_AUDIO_MSF 0x47 +#define GPCMD_PLAY_AUDIO_TI 0x48 +#define GPCMD_PLAY_CD 0xbc +#define GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL 0x1e +#define GPCMD_READ_10 0x28 +#define GPCMD_READ_12 0xa8 +#define GPCMD_READ_BUFFER 0x3c +#define GPCMD_READ_BUFFER_CAPACITY 0x5c +#define GPCMD_READ_CDVD_CAPACITY 0x25 +#define GPCMD_READ_CD 0xbe +#define GPCMD_READ_CD_MSF 0xb9 +#define GPCMD_READ_DISC_INFO 0x51 +#define GPCMD_READ_DVD_STRUCTURE 0xad +#define GPCMD_READ_FORMAT_CAPACITIES 0x23 +#define GPCMD_READ_HEADER 0x44 +#define GPCMD_READ_TRACK_RZONE_INFO 0x52 +#define GPCMD_READ_SUBCHANNEL 0x42 +#define GPCMD_READ_TOC_PMA_ATIP 0x43 +#define GPCMD_REPAIR_RZONE_TRACK 0x58 +#define GPCMD_REPORT_KEY 0xa4 +#define GPCMD_REQUEST_SENSE 0x03 +#define GPCMD_RESERVE_RZONE_TRACK 0x53 +#define GPCMD_SEND_CUE_SHEET 0x5d +#define GPCMD_SCAN 0xba +#define GPCMD_SEEK 0x2b +#define GPCMD_SEND_DVD_STRUCTURE 0xbf +#define GPCMD_SEND_EVENT 0xa2 +#define GPCMD_SEND_KEY 0xa3 +#define GPCMD_SEND_OPC 0x54 +#define GPCMD_SET_READ_AHEAD 0xa7 +#define GPCMD_SET_STREAMING 0xb6 +#define GPCMD_START_STOP_UNIT 0x1b +#define GPCMD_STOP_PLAY_SCAN 0x4e +#define GPCMD_TEST_UNIT_READY 0x00 +#define GPCMD_VERIFY_10 0x2f +#define GPCMD_WRITE_10 0x2a +#define GPCMD_WRITE_12 0xaa +#define GPCMD_WRITE_AND_VERIFY_10 0x2e +#define GPCMD_WRITE_BUFFER 0x3b +/* This is listed as optional in ATAPI 2.6, but is (curiously) + * missing from Mt. Fuji, Table 57. It _is_ mentioned in Mt. Fuji + * Table 377 as an MMC command for SCSi devices though... Most ATAPI + * drives support it. */ +#define GPCMD_SET_SPEED 0xbb +/* This seems to be a SCSI specific CD-ROM opcode + * to play data at track/index */ +#define GPCMD_PLAYAUDIO_TI 0x48 +/* + * From MS Media Status Notification Support Specification. For + * older drives only. + */ +#define GPCMD_GET_MEDIA_STATUS 0xda + +/* Mode page codes for mode sense/set */ +#define GPMODE_VENDOR_PAGE 0x00 +#define GPMODE_R_W_ERROR_PAGE 0x01 +#define GPMODE_WRITE_PARMS_PAGE 0x05 +#define GPMODE_WCACHING_PAGE 0x08 +#define GPMODE_AUDIO_CTL_PAGE 0x0e +#define GPMODE_POWER_PAGE 0x1a +#define GPMODE_FAULT_FAIL_PAGE 0x1c +#define GPMODE_TO_PROTECT_PAGE 0x1d +#define GPMODE_CAPABILITIES_PAGE 0x2a +#define GPMODE_ALL_PAGES 0x3f +/* Not in Mt. Fuji, but in ATAPI 2.6 -- deprecated now in favor + * of MODE_SENSE_POWER_PAGE */ +#define GPMODE_CDROM_PAGE 0x0d + + + +/* DVD struct types */ +#define DVD_STRUCT_PHYSICAL 0x00 +#define DVD_STRUCT_COPYRIGHT 0x01 +#define DVD_STRUCT_DISCKEY 0x02 +#define DVD_STRUCT_BCA 0x03 +#define DVD_STRUCT_MANUFACT 0x04 + +struct dvd_layer { + __u8 book_version : 4; + __u8 book_type : 4; + __u8 min_rate : 4; + __u8 disc_size : 4; + __u8 layer_type : 4; + __u8 track_path : 1; + __u8 nlayers : 2; + __u8 track_density : 4; + __u8 linear_density : 4; + __u8 bca : 1; + __u32 start_sector; + __u32 end_sector; + __u32 end_sector_l0; +}; + +#define DVD_LAYERS 4 + +struct dvd_physical { + __u8 type; + __u8 layer_num; + struct dvd_layer layer[DVD_LAYERS]; +}; + +struct dvd_copyright { + __u8 type; + + __u8 layer_num; + __u8 cpst; + __u8 rmi; +}; + +struct dvd_disckey { + __u8 type; + + unsigned agid : 2; + __u8 value[2048]; +}; + +struct dvd_bca { + __u8 type; + + int len; + __u8 value[188]; +}; + +struct dvd_manufact { + __u8 type; + + __u8 layer_num; + int len; + __u8 value[2048]; +}; + +typedef union { + __u8 type; + + struct dvd_physical physical; + struct dvd_copyright copyright; + struct dvd_disckey disckey; + struct dvd_bca bca; + struct dvd_manufact manufact; +} dvd_struct; + +/* + * DVD authentication ioctl + */ + +/* Authentication states */ +#define DVD_LU_SEND_AGID 0 +#define DVD_HOST_SEND_CHALLENGE 1 +#define DVD_LU_SEND_KEY1 2 +#define DVD_LU_SEND_CHALLENGE 3 +#define DVD_HOST_SEND_KEY2 4 + +/* Termination states */ +#define DVD_AUTH_ESTABLISHED 5 +#define DVD_AUTH_FAILURE 6 + +/* Other functions */ +#define DVD_LU_SEND_TITLE_KEY 7 +#define DVD_LU_SEND_ASF 8 +#define DVD_INVALIDATE_AGID 9 +#define DVD_LU_SEND_RPC_STATE 10 +#define DVD_HOST_SEND_RPC_STATE 11 + +/* State data */ +typedef __u8 dvd_key[5]; /* 40-bit value, MSB is first elem. */ +typedef __u8 dvd_challenge[10]; /* 80-bit value, MSB is first elem. */ + +struct dvd_lu_send_agid { + __u8 type; + unsigned agid : 2; +}; + +struct dvd_host_send_challenge { + __u8 type; + unsigned agid : 2; + + dvd_challenge chal; +}; + +struct dvd_send_key { + __u8 type; + unsigned agid : 2; + + dvd_key key; +}; + +struct dvd_lu_send_challenge { + __u8 type; + unsigned agid : 2; + + dvd_challenge chal; +}; + +#define DVD_CPM_NO_COPYRIGHT 0 +#define DVD_CPM_COPYRIGHTED 1 + +#define DVD_CP_SEC_NONE 0 +#define DVD_CP_SEC_EXIST 1 + +#define DVD_CGMS_UNRESTRICTED 0 +#define DVD_CGMS_SINGLE 2 +#define DVD_CGMS_RESTRICTED 3 + +struct dvd_lu_send_title_key { + __u8 type; + unsigned agid : 2; + + dvd_key title_key; + int lba; + unsigned cpm : 1; + unsigned cp_sec : 1; + unsigned cgms : 2; +}; + +struct dvd_lu_send_asf { + __u8 type; + unsigned agid : 2; + + unsigned asf : 1; +}; + +struct dvd_host_send_rpcstate { + __u8 type; + __u8 pdrc; +}; + +struct dvd_lu_send_rpcstate { + __u8 type : 2; + __u8 vra : 3; + __u8 ucca : 3; + __u8 region_mask; + __u8 rpc_scheme; +}; + +typedef union { + __u8 type; + + struct dvd_lu_send_agid lsa; + struct dvd_host_send_challenge hsc; + struct dvd_send_key lsk; + struct dvd_lu_send_challenge lsc; + struct dvd_send_key hsk; + struct dvd_lu_send_title_key lstk; + struct dvd_lu_send_asf lsasf; + struct dvd_host_send_rpcstate hrpcs; + struct dvd_lu_send_rpcstate lrpcs; +} dvd_authinfo; + +struct request_sense { +#if defined(__BIG_ENDIAN_BITFIELD) + __u8 valid : 1; + __u8 error_code : 7; +#elif defined(__LITTLE_ENDIAN_BITFIELD) + __u8 error_code : 7; + __u8 valid : 1; +#endif + __u8 segment_number; +#if defined(__BIG_ENDIAN_BITFIELD) + __u8 reserved1 : 2; + __u8 ili : 1; + __u8 reserved2 : 1; + __u8 sense_key : 4; +#elif defined(__LITTLE_ENDIAN_BITFIELD) + __u8 sense_key : 4; + __u8 reserved2 : 1; + __u8 ili : 1; + __u8 reserved1 : 2; +#endif + __u8 information[4]; + __u8 add_sense_len; + __u8 command_info[4]; + __u8 asc; + __u8 ascq; + __u8 fruc; + __u8 sks[3]; + __u8 asb[46]; +}; + +/* + * feature profile + */ +#define CDF_RWRT 0x0020 /* "Random Writable" */ +#define CDF_HWDM 0x0024 /* "Hardware Defect Management" */ +#define CDF_MRW 0x0028 + +/* + * media status bits + */ +#define CDM_MRW_NOTMRW 0 +#define CDM_MRW_BGFORMAT_INACTIVE 1 +#define CDM_MRW_BGFORMAT_ACTIVE 2 +#define CDM_MRW_BGFORMAT_COMPLETE 3 + +/* + * mrw address spaces + */ +#define MRW_LBA_DMA 0 +#define MRW_LBA_GAA 1 + +/* + * mrw mode pages (first is deprecated) -- probed at init time and + * cdi->mrw_mode_page is set + */ +#define MRW_MODE_PC_PRE1 0x2c +#define MRW_MODE_PC 0x03 + +struct mrw_feature_desc { + __be16 feature_code; +#if defined(__BIG_ENDIAN_BITFIELD) + __u8 reserved1 : 2; + __u8 feature_version : 4; + __u8 persistent : 1; + __u8 curr : 1; +#elif defined(__LITTLE_ENDIAN_BITFIELD) + __u8 curr : 1; + __u8 persistent : 1; + __u8 feature_version : 4; + __u8 reserved1 : 2; +#endif + __u8 add_len; +#if defined(__BIG_ENDIAN_BITFIELD) + __u8 reserved2 : 7; + __u8 write : 1; +#elif defined(__LITTLE_ENDIAN_BITFIELD) + __u8 write : 1; + __u8 reserved2 : 7; +#endif + __u8 reserved3; + __u8 reserved4; + __u8 reserved5; +}; + +/* cf. mmc4r02g.pdf 5.3.10 Random Writable Feature (0020h) pg 197 of 635 */ +struct rwrt_feature_desc { + __be16 feature_code; +#if defined(__BIG_ENDIAN_BITFIELD) + __u8 reserved1 : 2; + __u8 feature_version : 4; + __u8 persistent : 1; + __u8 curr : 1; +#elif defined(__LITTLE_ENDIAN_BITFIELD) + __u8 curr : 1; + __u8 persistent : 1; + __u8 feature_version : 4; + __u8 reserved1 : 2; +#endif + __u8 add_len; + __u32 last_lba; + __u32 block_size; + __u16 blocking; +#if defined(__BIG_ENDIAN_BITFIELD) + __u8 reserved2 : 7; + __u8 page_present : 1; +#elif defined(__LITTLE_ENDIAN_BITFIELD) + __u8 page_present : 1; + __u8 reserved2 : 7; +#endif + __u8 reserved3; +}; + +typedef struct { + __be16 disc_information_length; +#if defined(__BIG_ENDIAN_BITFIELD) + __u8 reserved1 : 3; + __u8 erasable : 1; + __u8 border_status : 2; + __u8 disc_status : 2; +#elif defined(__LITTLE_ENDIAN_BITFIELD) + __u8 disc_status : 2; + __u8 border_status : 2; + __u8 erasable : 1; + __u8 reserved1 : 3; +#else +#error "Please fix <asm/byteorder.h>" +#endif + __u8 n_first_track; + __u8 n_sessions_lsb; + __u8 first_track_lsb; + __u8 last_track_lsb; +#if defined(__BIG_ENDIAN_BITFIELD) + __u8 did_v : 1; + __u8 dbc_v : 1; + __u8 uru : 1; + __u8 reserved2 : 2; + __u8 dbit : 1; + __u8 mrw_status : 2; +#elif defined(__LITTLE_ENDIAN_BITFIELD) + __u8 mrw_status : 2; + __u8 dbit : 1; + __u8 reserved2 : 2; + __u8 uru : 1; + __u8 dbc_v : 1; + __u8 did_v : 1; +#endif + __u8 disc_type; + __u8 n_sessions_msb; + __u8 first_track_msb; + __u8 last_track_msb; + __u32 disc_id; + __u32 lead_in; + __u32 lead_out; + __u8 disc_bar_code[8]; + __u8 reserved3; + __u8 n_opc; +} disc_information; + +typedef struct { + __be16 track_information_length; + __u8 track_lsb; + __u8 session_lsb; + __u8 reserved1; +#if defined(__BIG_ENDIAN_BITFIELD) + __u8 reserved2 : 2; + __u8 damage : 1; + __u8 copy : 1; + __u8 track_mode : 4; + __u8 rt : 1; + __u8 blank : 1; + __u8 packet : 1; + __u8 fp : 1; + __u8 data_mode : 4; + __u8 reserved3 : 6; + __u8 lra_v : 1; + __u8 nwa_v : 1; +#elif defined(__LITTLE_ENDIAN_BITFIELD) + __u8 track_mode : 4; + __u8 copy : 1; + __u8 damage : 1; + __u8 reserved2 : 2; + __u8 data_mode : 4; + __u8 fp : 1; + __u8 packet : 1; + __u8 blank : 1; + __u8 rt : 1; + __u8 nwa_v : 1; + __u8 lra_v : 1; + __u8 reserved3 : 6; +#endif + __be32 track_start; + __be32 next_writable; + __be32 free_blocks; + __be32 fixed_packet_size; + __be32 track_size; + __be32 last_rec_address; +} track_information; + +struct feature_header { + __u32 data_len; + __u8 reserved1; + __u8 reserved2; + __u16 curr_profile; +}; + +struct mode_page_header { + __be16 mode_data_length; + __u8 medium_type; + __u8 reserved1; + __u8 reserved2; + __u8 reserved3; + __be16 desc_length; +}; + + +#endif /* _UAPI_LINUX_CDROM_H */ diff --git a/include/linux/cgroupstats.h b/include/uapi/linux/cgroupstats.h index 3753c33160d..3753c33160d 100644 --- a/include/linux/cgroupstats.h +++ b/include/uapi/linux/cgroupstats.h diff --git a/include/linux/chio.h b/include/uapi/linux/chio.h index d9bac7f9728..d9bac7f9728 100644 --- a/include/linux/chio.h +++ b/include/uapi/linux/chio.h diff --git a/include/uapi/linux/cm4000_cs.h b/include/uapi/linux/cm4000_cs.h new file mode 100644 index 00000000000..bc51f77db91 --- /dev/null +++ b/include/uapi/linux/cm4000_cs.h @@ -0,0 +1,62 @@ +#ifndef _UAPI_CM4000_H_ +#define _UAPI_CM4000_H_ + +#include <linux/types.h> + +#define MAX_ATR 33 + +#define CM4000_MAX_DEV 4 + +/* those two structures are passed via ioctl() from/to userspace. They are + * used by existing userspace programs, so I kepth the awkward "bIFSD" naming + * not to break compilation of userspace apps. -HW */ + +typedef struct atreq { + __s32 atr_len; + unsigned char atr[64]; + __s32 power_act; + unsigned char bIFSD; + unsigned char bIFSC; +} atreq_t; + + +/* what is particularly stupid in the original driver is the arch-dependent + * member sizes. This leads to CONFIG_COMPAT breakage, since 32bit userspace + * will lay out the structure members differently than the 64bit kernel. + * + * I've changed "ptsreq.protocol" from "unsigned long" to "__u32". + * On 32bit this will make no difference. With 64bit kernels, it will make + * 32bit apps work, too. + */ + +typedef struct ptsreq { + __u32 protocol; /*T=0: 2^0, T=1: 2^1*/ + unsigned char flags; + unsigned char pts1; + unsigned char pts2; + unsigned char pts3; +} ptsreq_t; + +#define CM_IOC_MAGIC 'c' +#define CM_IOC_MAXNR 255 + +#define CM_IOCGSTATUS _IOR (CM_IOC_MAGIC, 0, unsigned char *) +#define CM_IOCGATR _IOWR(CM_IOC_MAGIC, 1, atreq_t *) +#define CM_IOCSPTS _IOW (CM_IOC_MAGIC, 2, ptsreq_t *) +#define CM_IOCSRDR _IO (CM_IOC_MAGIC, 3) +#define CM_IOCARDOFF _IO (CM_IOC_MAGIC, 4) + +#define CM_IOSDBGLVL _IOW(CM_IOC_MAGIC, 250, int*) + +/* card and device states */ +#define CM_CARD_INSERTED 0x01 +#define CM_CARD_POWERED 0x02 +#define CM_ATR_PRESENT 0x04 +#define CM_ATR_VALID 0x08 +#define CM_STATE_VALID 0x0f +/* extra info only from CM4000 */ +#define CM_NO_READER 0x10 +#define CM_BAD_CARD 0x20 + + +#endif /* _UAPI_CM4000_H_ */ diff --git a/include/uapi/linux/cn_proc.h b/include/uapi/linux/cn_proc.h new file mode 100644 index 00000000000..0d7b49973bb --- /dev/null +++ b/include/uapi/linux/cn_proc.h @@ -0,0 +1,121 @@ +/* + * cn_proc.h - process events connector + * + * Copyright (C) Matt Helsley, IBM Corp. 2005 + * Based on cn_fork.h by Nguyen Anh Quynh and Guillaume Thouvenin + * Copyright (C) 2005 Nguyen Anh Quynh <aquynh@gmail.com> + * Copyright (C) 2005 Guillaume Thouvenin <guillaume.thouvenin@bull.net> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2.1 of the GNU Lesser General Public License + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it would be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + */ + +#ifndef _UAPICN_PROC_H +#define _UAPICN_PROC_H + +#include <linux/types.h> + +/* + * Userspace sends this enum to register with the kernel that it is listening + * for events on the connector. + */ +enum proc_cn_mcast_op { + PROC_CN_MCAST_LISTEN = 1, + PROC_CN_MCAST_IGNORE = 2 +}; + +/* + * From the user's point of view, the process + * ID is the thread group ID and thread ID is the internal + * kernel "pid". So, fields are assigned as follow: + * + * In user space - In kernel space + * + * parent process ID = parent->tgid + * parent thread ID = parent->pid + * child process ID = child->tgid + * child thread ID = child->pid + */ + +struct proc_event { + enum what { + /* Use successive bits so the enums can be used to record + * sets of events as well + */ + PROC_EVENT_NONE = 0x00000000, + PROC_EVENT_FORK = 0x00000001, + PROC_EVENT_EXEC = 0x00000002, + PROC_EVENT_UID = 0x00000004, + PROC_EVENT_GID = 0x00000040, + PROC_EVENT_SID = 0x00000080, + PROC_EVENT_PTRACE = 0x00000100, + PROC_EVENT_COMM = 0x00000200, + /* "next" should be 0x00000400 */ + /* "last" is the last process event: exit */ + PROC_EVENT_EXIT = 0x80000000 + } what; + __u32 cpu; + __u64 __attribute__((aligned(8))) timestamp_ns; + /* Number of nano seconds since system boot */ + union { /* must be last field of proc_event struct */ + struct { + __u32 err; + } ack; + + struct fork_proc_event { + __kernel_pid_t parent_pid; + __kernel_pid_t parent_tgid; + __kernel_pid_t child_pid; + __kernel_pid_t child_tgid; + } fork; + + struct exec_proc_event { + __kernel_pid_t process_pid; + __kernel_pid_t process_tgid; + } exec; + + struct id_proc_event { + __kernel_pid_t process_pid; + __kernel_pid_t process_tgid; + union { + __u32 ruid; /* task uid */ + __u32 rgid; /* task gid */ + } r; + union { + __u32 euid; + __u32 egid; + } e; + } id; + + struct sid_proc_event { + __kernel_pid_t process_pid; + __kernel_pid_t process_tgid; + } sid; + + struct ptrace_proc_event { + __kernel_pid_t process_pid; + __kernel_pid_t process_tgid; + __kernel_pid_t tracer_pid; + __kernel_pid_t tracer_tgid; + } ptrace; + + struct comm_proc_event { + __kernel_pid_t process_pid; + __kernel_pid_t process_tgid; + char comm[16]; + } comm; + + struct exit_proc_event { + __kernel_pid_t process_pid; + __kernel_pid_t process_tgid; + __u32 exit_code, exit_signal; + } exit; + } event_data; +}; + +#endif /* _UAPICN_PROC_H */ diff --git a/include/uapi/linux/coda.h b/include/uapi/linux/coda.h new file mode 100644 index 00000000000..695fade33c6 --- /dev/null +++ b/include/uapi/linux/coda.h @@ -0,0 +1,741 @@ +/* + You may distribute this file under either of the two licenses that + follow at your discretion. +*/ + +/* BLURB lgpl + + Coda File System + Release 5 + + Copyright (c) 1987-1999 Carnegie Mellon University + Additional copyrights listed below + +This code is distributed "AS IS" without warranty of any kind under +the terms of the GNU Library General Public Licence Version 2, as +shown in the file LICENSE, or under the license shown below. The +technical and financial contributors to Coda are listed in the file +CREDITS. + + Additional copyrights +*/ + +/* + + Coda: an Experimental Distributed File System + Release 4.0 + + Copyright (c) 1987-1999 Carnegie Mellon University + All Rights Reserved + +Permission to use, copy, modify and distribute this software and its +documentation is hereby granted, provided that both the copyright +notice and this permission notice appear in all copies of the +software, derivative works or modified versions, and any portions +thereof, and that both notices appear in supporting documentation, and +that credit is given to Carnegie Mellon University in all documents +and publicity pertaining to direct or indirect use of this code or its +derivatives. + +CODA IS AN EXPERIMENTAL SOFTWARE SYSTEM AND IS KNOWN TO HAVE BUGS, +SOME OF WHICH MAY HAVE SERIOUS CONSEQUENCES. CARNEGIE MELLON ALLOWS +FREE USE OF THIS SOFTWARE IN ITS "AS IS" CONDITION. CARNEGIE MELLON +DISCLAIMS ANY LIABILITY OF ANY KIND FOR ANY DAMAGES WHATSOEVER +RESULTING DIRECTLY OR INDIRECTLY FROM THE USE OF THIS SOFTWARE OR OF +ANY DERIVATIVE WORK. + +Carnegie Mellon encourages users of this software to return any +improvements or extensions that they make, and to grant Carnegie +Mellon the rights to redistribute these changes without encumbrance. +*/ + +/* + * + * Based on cfs.h from Mach, but revamped for increased simplicity. + * Linux modifications by + * Peter Braam, Aug 1996 + */ + +#ifndef _UAPI_CODA_HEADER_ +#define _UAPI_CODA_HEADER_ + + +/* Catch new _KERNEL defn for NetBSD and DJGPP/__CYGWIN32__ */ +#if defined(__NetBSD__) || \ + ((defined(DJGPP) || defined(__CYGWIN32__)) && !defined(KERNEL)) +#include <sys/types.h> +#endif + +#ifndef CODA_MAXSYMLINKS +#define CODA_MAXSYMLINKS 10 +#endif + +#if defined(DJGPP) || defined(__CYGWIN32__) +#ifdef KERNEL +typedef unsigned long u_long; +typedef unsigned int u_int; +typedef unsigned short u_short; +typedef u_long ino_t; +typedef u_long dev_t; +typedef void * caddr_t; +#ifdef DOS +typedef unsigned __int64 u_quad_t; +#else +typedef unsigned long long u_quad_t; +#endif + +#define inline + +struct timespec { + long ts_sec; + long ts_nsec; +}; +#else /* DJGPP but not KERNEL */ +#include <sys/time.h> +typedef unsigned long long u_quad_t; +#endif /* !KERNEL */ +#endif /* !DJGPP */ + + +#if defined(__linux__) +#include <linux/time.h> +#define cdev_t u_quad_t +#ifndef __KERNEL__ +#if !defined(_UQUAD_T_) && (!defined(__GLIBC__) || __GLIBC__ < 2) +#define _UQUAD_T_ 1 +typedef unsigned long long u_quad_t; +#endif +#endif /* __KERNEL__ */ +#else +#define cdev_t dev_t +#endif + +#ifdef __CYGWIN32__ +struct timespec { + time_t tv_sec; /* seconds */ + long tv_nsec; /* nanoseconds */ +}; +#endif + +#ifndef __BIT_TYPES_DEFINED__ +#define __BIT_TYPES_DEFINED__ +typedef signed char int8_t; +typedef unsigned char u_int8_t; +typedef short int16_t; +typedef unsigned short u_int16_t; +typedef int int32_t; +typedef unsigned int u_int32_t; +#endif + + +/* + * Cfs constants + */ +#define CODA_MAXNAMLEN 255 +#define CODA_MAXPATHLEN 1024 +#define CODA_MAXSYMLINK 10 + +/* these are Coda's version of O_RDONLY etc combinations + * to deal with VFS open modes + */ +#define C_O_READ 0x001 +#define C_O_WRITE 0x002 +#define C_O_TRUNC 0x010 +#define C_O_EXCL 0x100 +#define C_O_CREAT 0x200 + +/* these are to find mode bits in Venus */ +#define C_M_READ 00400 +#define C_M_WRITE 00200 + +/* for access Venus will use */ +#define C_A_C_OK 8 /* Test for writing upon create. */ +#define C_A_R_OK 4 /* Test for read permission. */ +#define C_A_W_OK 2 /* Test for write permission. */ +#define C_A_X_OK 1 /* Test for execute permission. */ +#define C_A_F_OK 0 /* Test for existence. */ + + + +#ifndef _VENUS_DIRENT_T_ +#define _VENUS_DIRENT_T_ 1 +struct venus_dirent { + u_int32_t d_fileno; /* file number of entry */ + u_int16_t d_reclen; /* length of this record */ + u_int8_t d_type; /* file type, see below */ + u_int8_t d_namlen; /* length of string in d_name */ + char d_name[CODA_MAXNAMLEN + 1];/* name must be no longer than this */ +}; +#undef DIRSIZ +#define DIRSIZ(dp) ((sizeof (struct venus_dirent) - (CODA_MAXNAMLEN+1)) + \ + (((dp)->d_namlen+1 + 3) &~ 3)) + +/* + * File types + */ +#define CDT_UNKNOWN 0 +#define CDT_FIFO 1 +#define CDT_CHR 2 +#define CDT_DIR 4 +#define CDT_BLK 6 +#define CDT_REG 8 +#define CDT_LNK 10 +#define CDT_SOCK 12 +#define CDT_WHT 14 + +/* + * Convert between stat structure types and directory types. + */ +#define IFTOCDT(mode) (((mode) & 0170000) >> 12) +#define CDTTOIF(dirtype) ((dirtype) << 12) + +#endif + +#ifndef _VUID_T_ +#define _VUID_T_ +typedef u_int32_t vuid_t; +typedef u_int32_t vgid_t; +#endif /*_VUID_T_ */ + +struct CodaFid { + u_int32_t opaque[4]; +}; + +#define coda_f2i(fid)\ + (fid ? (fid->opaque[3] ^ (fid->opaque[2]<<10) ^ (fid->opaque[1]<<20) ^ fid->opaque[0]) : 0) + +#ifndef _VENUS_VATTR_T_ +#define _VENUS_VATTR_T_ +/* + * Vnode types. VNON means no type. + */ +enum coda_vtype { C_VNON, C_VREG, C_VDIR, C_VBLK, C_VCHR, C_VLNK, C_VSOCK, C_VFIFO, C_VBAD }; + +struct coda_vattr { + long va_type; /* vnode type (for create) */ + u_short va_mode; /* files access mode and type */ + short va_nlink; /* number of references to file */ + vuid_t va_uid; /* owner user id */ + vgid_t va_gid; /* owner group id */ + long va_fileid; /* file id */ + u_quad_t va_size; /* file size in bytes */ + long va_blocksize; /* blocksize preferred for i/o */ + struct timespec va_atime; /* time of last access */ + struct timespec va_mtime; /* time of last modification */ + struct timespec va_ctime; /* time file changed */ + u_long va_gen; /* generation number of file */ + u_long va_flags; /* flags defined for file */ + cdev_t va_rdev; /* device special file represents */ + u_quad_t va_bytes; /* bytes of disk space held by file */ + u_quad_t va_filerev; /* file modification number */ +}; + +#endif + +/* structure used by CODA_STATFS for getting cache information from venus */ +struct coda_statfs { + int32_t f_blocks; + int32_t f_bfree; + int32_t f_bavail; + int32_t f_files; + int32_t f_ffree; +}; + +/* + * Kernel <--> Venus communications. + */ + +#define CODA_ROOT 2 +#define CODA_OPEN_BY_FD 3 +#define CODA_OPEN 4 +#define CODA_CLOSE 5 +#define CODA_IOCTL 6 +#define CODA_GETATTR 7 +#define CODA_SETATTR 8 +#define CODA_ACCESS 9 +#define CODA_LOOKUP 10 +#define CODA_CREATE 11 +#define CODA_REMOVE 12 +#define CODA_LINK 13 +#define CODA_RENAME 14 +#define CODA_MKDIR 15 +#define CODA_RMDIR 16 +#define CODA_SYMLINK 18 +#define CODA_READLINK 19 +#define CODA_FSYNC 20 +#define CODA_VGET 22 +#define CODA_SIGNAL 23 +#define CODA_REPLACE 24 /* DOWNCALL */ +#define CODA_FLUSH 25 /* DOWNCALL */ +#define CODA_PURGEUSER 26 /* DOWNCALL */ +#define CODA_ZAPFILE 27 /* DOWNCALL */ +#define CODA_ZAPDIR 28 /* DOWNCALL */ +#define CODA_PURGEFID 30 /* DOWNCALL */ +#define CODA_OPEN_BY_PATH 31 +#define CODA_RESOLVE 32 +#define CODA_REINTEGRATE 33 +#define CODA_STATFS 34 +#define CODA_STORE 35 +#define CODA_RELEASE 36 +#define CODA_NCALLS 37 + +#define DOWNCALL(opcode) (opcode >= CODA_REPLACE && opcode <= CODA_PURGEFID) + +#define VC_MAXDATASIZE 8192 +#define VC_MAXMSGSIZE sizeof(union inputArgs)+sizeof(union outputArgs) +\ + VC_MAXDATASIZE + +#define CIOC_KERNEL_VERSION _IOWR('c', 10, size_t) + +#define CODA_KERNEL_VERSION 3 /* 128-bit file identifiers */ + +/* + * Venus <-> Coda RPC arguments + */ +struct coda_in_hdr { + u_int32_t opcode; + u_int32_t unique; /* Keep multiple outstanding msgs distinct */ + pid_t pid; + pid_t pgid; + vuid_t uid; +}; + +/* Really important that opcode and unique are 1st two fields! */ +struct coda_out_hdr { + u_int32_t opcode; + u_int32_t unique; + u_int32_t result; +}; + +/* coda_root: NO_IN */ +struct coda_root_out { + struct coda_out_hdr oh; + struct CodaFid VFid; +}; + +struct coda_root_in { + struct coda_in_hdr in; +}; + +/* coda_open: */ +struct coda_open_in { + struct coda_in_hdr ih; + struct CodaFid VFid; + int flags; +}; + +struct coda_open_out { + struct coda_out_hdr oh; + cdev_t dev; + ino_t inode; +}; + + +/* coda_store: */ +struct coda_store_in { + struct coda_in_hdr ih; + struct CodaFid VFid; + int flags; +}; + +struct coda_store_out { + struct coda_out_hdr out; +}; + +/* coda_release: */ +struct coda_release_in { + struct coda_in_hdr ih; + struct CodaFid VFid; + int flags; +}; + +struct coda_release_out { + struct coda_out_hdr out; +}; + +/* coda_close: */ +struct coda_close_in { + struct coda_in_hdr ih; + struct CodaFid VFid; + int flags; +}; + +struct coda_close_out { + struct coda_out_hdr out; +}; + +/* coda_ioctl: */ +struct coda_ioctl_in { + struct coda_in_hdr ih; + struct CodaFid VFid; + int cmd; + int len; + int rwflag; + char *data; /* Place holder for data. */ +}; + +struct coda_ioctl_out { + struct coda_out_hdr oh; + int len; + caddr_t data; /* Place holder for data. */ +}; + + +/* coda_getattr: */ +struct coda_getattr_in { + struct coda_in_hdr ih; + struct CodaFid VFid; +}; + +struct coda_getattr_out { + struct coda_out_hdr oh; + struct coda_vattr attr; +}; + + +/* coda_setattr: NO_OUT */ +struct coda_setattr_in { + struct coda_in_hdr ih; + struct CodaFid VFid; + struct coda_vattr attr; +}; + +struct coda_setattr_out { + struct coda_out_hdr out; +}; + +/* coda_access: NO_OUT */ +struct coda_access_in { + struct coda_in_hdr ih; + struct CodaFid VFid; + int flags; +}; + +struct coda_access_out { + struct coda_out_hdr out; +}; + + +/* lookup flags */ +#define CLU_CASE_SENSITIVE 0x01 +#define CLU_CASE_INSENSITIVE 0x02 + +/* coda_lookup: */ +struct coda_lookup_in { + struct coda_in_hdr ih; + struct CodaFid VFid; + int name; /* Place holder for data. */ + int flags; +}; + +struct coda_lookup_out { + struct coda_out_hdr oh; + struct CodaFid VFid; + int vtype; +}; + + +/* coda_create: */ +struct coda_create_in { + struct coda_in_hdr ih; + struct CodaFid VFid; + struct coda_vattr attr; + int excl; + int mode; + int name; /* Place holder for data. */ +}; + +struct coda_create_out { + struct coda_out_hdr oh; + struct CodaFid VFid; + struct coda_vattr attr; +}; + + +/* coda_remove: NO_OUT */ +struct coda_remove_in { + struct coda_in_hdr ih; + struct CodaFid VFid; + int name; /* Place holder for data. */ +}; + +struct coda_remove_out { + struct coda_out_hdr out; +}; + +/* coda_link: NO_OUT */ +struct coda_link_in { + struct coda_in_hdr ih; + struct CodaFid sourceFid; /* cnode to link *to* */ + struct CodaFid destFid; /* Directory in which to place link */ + int tname; /* Place holder for data. */ +}; + +struct coda_link_out { + struct coda_out_hdr out; +}; + + +/* coda_rename: NO_OUT */ +struct coda_rename_in { + struct coda_in_hdr ih; + struct CodaFid sourceFid; + int srcname; + struct CodaFid destFid; + int destname; +}; + +struct coda_rename_out { + struct coda_out_hdr out; +}; + +/* coda_mkdir: */ +struct coda_mkdir_in { + struct coda_in_hdr ih; + struct CodaFid VFid; + struct coda_vattr attr; + int name; /* Place holder for data. */ +}; + +struct coda_mkdir_out { + struct coda_out_hdr oh; + struct CodaFid VFid; + struct coda_vattr attr; +}; + + +/* coda_rmdir: NO_OUT */ +struct coda_rmdir_in { + struct coda_in_hdr ih; + struct CodaFid VFid; + int name; /* Place holder for data. */ +}; + +struct coda_rmdir_out { + struct coda_out_hdr out; +}; + +/* coda_symlink: NO_OUT */ +struct coda_symlink_in { + struct coda_in_hdr ih; + struct CodaFid VFid; /* Directory to put symlink in */ + int srcname; + struct coda_vattr attr; + int tname; +}; + +struct coda_symlink_out { + struct coda_out_hdr out; +}; + +/* coda_readlink: */ +struct coda_readlink_in { + struct coda_in_hdr ih; + struct CodaFid VFid; +}; + +struct coda_readlink_out { + struct coda_out_hdr oh; + int count; + caddr_t data; /* Place holder for data. */ +}; + + +/* coda_fsync: NO_OUT */ +struct coda_fsync_in { + struct coda_in_hdr ih; + struct CodaFid VFid; +}; + +struct coda_fsync_out { + struct coda_out_hdr out; +}; + +/* coda_vget: */ +struct coda_vget_in { + struct coda_in_hdr ih; + struct CodaFid VFid; +}; + +struct coda_vget_out { + struct coda_out_hdr oh; + struct CodaFid VFid; + int vtype; +}; + + +/* CODA_SIGNAL is out-of-band, doesn't need data. */ +/* CODA_INVALIDATE is a venus->kernel call */ +/* CODA_FLUSH is a venus->kernel call */ + +/* coda_purgeuser: */ +/* CODA_PURGEUSER is a venus->kernel call */ +struct coda_purgeuser_out { + struct coda_out_hdr oh; + vuid_t uid; +}; + +/* coda_zapfile: */ +/* CODA_ZAPFILE is a venus->kernel call */ +struct coda_zapfile_out { + struct coda_out_hdr oh; + struct CodaFid CodaFid; +}; + +/* coda_zapdir: */ +/* CODA_ZAPDIR is a venus->kernel call */ +struct coda_zapdir_out { + struct coda_out_hdr oh; + struct CodaFid CodaFid; +}; + +/* coda_purgefid: */ +/* CODA_PURGEFID is a venus->kernel call */ +struct coda_purgefid_out { + struct coda_out_hdr oh; + struct CodaFid CodaFid; +}; + +/* coda_replace: */ +/* CODA_REPLACE is a venus->kernel call */ +struct coda_replace_out { /* coda_replace is a venus->kernel call */ + struct coda_out_hdr oh; + struct CodaFid NewFid; + struct CodaFid OldFid; +}; + +/* coda_open_by_fd: */ +struct coda_open_by_fd_in { + struct coda_in_hdr ih; + struct CodaFid VFid; + int flags; +}; + +struct coda_open_by_fd_out { + struct coda_out_hdr oh; + int fd; + +#ifdef __KERNEL__ + struct file *fh; /* not passed from userspace but used in-kernel only */ +#endif +}; + +/* coda_open_by_path: */ +struct coda_open_by_path_in { + struct coda_in_hdr ih; + struct CodaFid VFid; + int flags; +}; + +struct coda_open_by_path_out { + struct coda_out_hdr oh; + int path; +}; + +/* coda_statfs: NO_IN */ +struct coda_statfs_in { + struct coda_in_hdr in; +}; + +struct coda_statfs_out { + struct coda_out_hdr oh; + struct coda_statfs stat; +}; + +/* + * Occasionally, we don't cache the fid returned by CODA_LOOKUP. + * For instance, if the fid is inconsistent. + * This case is handled by setting the top bit of the type result parameter. + */ +#define CODA_NOCACHE 0x80000000 + +union inputArgs { + struct coda_in_hdr ih; /* NB: every struct below begins with an ih */ + struct coda_open_in coda_open; + struct coda_store_in coda_store; + struct coda_release_in coda_release; + struct coda_close_in coda_close; + struct coda_ioctl_in coda_ioctl; + struct coda_getattr_in coda_getattr; + struct coda_setattr_in coda_setattr; + struct coda_access_in coda_access; + struct coda_lookup_in coda_lookup; + struct coda_create_in coda_create; + struct coda_remove_in coda_remove; + struct coda_link_in coda_link; + struct coda_rename_in coda_rename; + struct coda_mkdir_in coda_mkdir; + struct coda_rmdir_in coda_rmdir; + struct coda_symlink_in coda_symlink; + struct coda_readlink_in coda_readlink; + struct coda_fsync_in coda_fsync; + struct coda_vget_in coda_vget; + struct coda_open_by_fd_in coda_open_by_fd; + struct coda_open_by_path_in coda_open_by_path; + struct coda_statfs_in coda_statfs; +}; + +union outputArgs { + struct coda_out_hdr oh; /* NB: every struct below begins with an oh */ + struct coda_root_out coda_root; + struct coda_open_out coda_open; + struct coda_ioctl_out coda_ioctl; + struct coda_getattr_out coda_getattr; + struct coda_lookup_out coda_lookup; + struct coda_create_out coda_create; + struct coda_mkdir_out coda_mkdir; + struct coda_readlink_out coda_readlink; + struct coda_vget_out coda_vget; + struct coda_purgeuser_out coda_purgeuser; + struct coda_zapfile_out coda_zapfile; + struct coda_zapdir_out coda_zapdir; + struct coda_purgefid_out coda_purgefid; + struct coda_replace_out coda_replace; + struct coda_open_by_fd_out coda_open_by_fd; + struct coda_open_by_path_out coda_open_by_path; + struct coda_statfs_out coda_statfs; +}; + +union coda_downcalls { + /* CODA_INVALIDATE is a venus->kernel call */ + /* CODA_FLUSH is a venus->kernel call */ + struct coda_purgeuser_out purgeuser; + struct coda_zapfile_out zapfile; + struct coda_zapdir_out zapdir; + struct coda_purgefid_out purgefid; + struct coda_replace_out replace; +}; + + +/* + * Used for identifying usage of "Control" and pioctls + */ + +#define PIOCPARM_MASK 0x0000ffff +struct ViceIoctl { + void __user *in; /* Data to be transferred in */ + void __user *out; /* Data to be transferred out */ + u_short in_size; /* Size of input buffer <= 2K */ + u_short out_size; /* Maximum size of output buffer, <= 2K */ +}; + +struct PioctlData { + const char __user *path; + int follow; + struct ViceIoctl vi; +}; + +#define CODA_CONTROL ".CONTROL" +#define CODA_CONTROLLEN 8 +#define CTL_INO -1 + +/* Data passed to mount */ + +#define CODA_MOUNT_VERSION 1 + +struct coda_mount_data { + int version; + int fd; /* Opened device */ +}; + +#endif /* _UAPI_CODA_HEADER_ */ diff --git a/include/uapi/linux/coda_psdev.h b/include/uapi/linux/coda_psdev.h new file mode 100644 index 00000000000..79d05981fc4 --- /dev/null +++ b/include/uapi/linux/coda_psdev.h @@ -0,0 +1,27 @@ +#ifndef _UAPI__CODA_PSDEV_H +#define _UAPI__CODA_PSDEV_H + +#include <linux/magic.h> + +#define CODA_PSDEV_MAJOR 67 +#define MAX_CODADEVS 5 /* how many do we allow */ + + +/* messages between coda filesystem in kernel and Venus */ +struct upc_req { + struct list_head uc_chain; + caddr_t uc_data; + u_short uc_flags; + u_short uc_inSize; /* Size is at most 5000 bytes */ + u_short uc_outSize; + u_short uc_opcode; /* copied from data to save lookup */ + int uc_unique; + wait_queue_head_t uc_sleep; /* process' wait queue */ +}; + +#define CODA_REQ_ASYNC 0x1 +#define CODA_REQ_READ 0x2 +#define CODA_REQ_WRITE 0x4 +#define CODA_REQ_ABORT 0x8 + +#endif /* _UAPI__CODA_PSDEV_H */ diff --git a/include/linux/coff.h b/include/uapi/linux/coff.h index 6354a7fe22b..6354a7fe22b 100644 --- a/include/linux/coff.h +++ b/include/uapi/linux/coff.h diff --git a/include/uapi/linux/connector.h b/include/uapi/linux/connector.h new file mode 100644 index 00000000000..8761a0349c7 --- /dev/null +++ b/include/uapi/linux/connector.h @@ -0,0 +1,77 @@ +/* + * connector.h + * + * 2004-2005 Copyright (c) Evgeniy Polyakov <zbr@ioremap.net> + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _UAPI__CONNECTOR_H +#define _UAPI__CONNECTOR_H + +#include <linux/types.h> + +/* + * Process Events connector unique ids -- used for message routing + */ +#define CN_IDX_PROC 0x1 +#define CN_VAL_PROC 0x1 +#define CN_IDX_CIFS 0x2 +#define CN_VAL_CIFS 0x1 +#define CN_W1_IDX 0x3 /* w1 communication */ +#define CN_W1_VAL 0x1 +#define CN_IDX_V86D 0x4 +#define CN_VAL_V86D_UVESAFB 0x1 +#define CN_IDX_BB 0x5 /* BlackBoard, from the TSP GPL sampling framework */ +#define CN_DST_IDX 0x6 +#define CN_DST_VAL 0x1 +#define CN_IDX_DM 0x7 /* Device Mapper */ +#define CN_VAL_DM_USERSPACE_LOG 0x1 +#define CN_IDX_DRBD 0x8 +#define CN_VAL_DRBD 0x1 +#define CN_KVP_IDX 0x9 /* HyperV KVP */ +#define CN_KVP_VAL 0x1 /* queries from the kernel */ + +#define CN_NETLINK_USERS 10 /* Highest index + 1 */ + +/* + * Maximum connector's message size. + */ +#define CONNECTOR_MAX_MSG_SIZE 16384 + +/* + * idx and val are unique identifiers which + * are used for message routing and + * must be registered in connector.h for in-kernel usage. + */ + +struct cb_id { + __u32 idx; + __u32 val; +}; + +struct cn_msg { + struct cb_id id; + + __u32 seq; + __u32 ack; + + __u16 len; /* Length of the following data */ + __u16 flags; + __u8 data[0]; +}; + +#endif /* _UAPI__CONNECTOR_H */ diff --git a/include/linux/const.h b/include/uapi/linux/const.h index c22c707c455..c22c707c455 100644 --- a/include/linux/const.h +++ b/include/uapi/linux/const.h diff --git a/include/uapi/linux/cramfs_fs.h b/include/uapi/linux/cramfs_fs.h new file mode 100644 index 00000000000..e4611a9b924 --- /dev/null +++ b/include/uapi/linux/cramfs_fs.h @@ -0,0 +1,88 @@ +#ifndef _UAPI__CRAMFS_H +#define _UAPI__CRAMFS_H + +#include <linux/types.h> +#include <linux/magic.h> + +#define CRAMFS_SIGNATURE "Compressed ROMFS" + +/* + * Width of various bitfields in struct cramfs_inode. + * Primarily used to generate warnings in mkcramfs. + */ +#define CRAMFS_MODE_WIDTH 16 +#define CRAMFS_UID_WIDTH 16 +#define CRAMFS_SIZE_WIDTH 24 +#define CRAMFS_GID_WIDTH 8 +#define CRAMFS_NAMELEN_WIDTH 6 +#define CRAMFS_OFFSET_WIDTH 26 + +/* + * Since inode.namelen is a unsigned 6-bit number, the maximum cramfs + * path length is 63 << 2 = 252. + */ +#define CRAMFS_MAXPATHLEN (((1 << CRAMFS_NAMELEN_WIDTH) - 1) << 2) + +/* + * Reasonably terse representation of the inode data. + */ +struct cramfs_inode { + __u32 mode:CRAMFS_MODE_WIDTH, uid:CRAMFS_UID_WIDTH; + /* SIZE for device files is i_rdev */ + __u32 size:CRAMFS_SIZE_WIDTH, gid:CRAMFS_GID_WIDTH; + /* NAMELEN is the length of the file name, divided by 4 and + rounded up. (cramfs doesn't support hard links.) */ + /* OFFSET: For symlinks and non-empty regular files, this + contains the offset (divided by 4) of the file data in + compressed form (starting with an array of block pointers; + see README). For non-empty directories it is the offset + (divided by 4) of the inode of the first file in that + directory. For anything else, offset is zero. */ + __u32 namelen:CRAMFS_NAMELEN_WIDTH, offset:CRAMFS_OFFSET_WIDTH; +}; + +struct cramfs_info { + __u32 crc; + __u32 edition; + __u32 blocks; + __u32 files; +}; + +/* + * Superblock information at the beginning of the FS. + */ +struct cramfs_super { + __u32 magic; /* 0x28cd3d45 - random number */ + __u32 size; /* length in bytes */ + __u32 flags; /* feature flags */ + __u32 future; /* reserved for future use */ + __u8 signature[16]; /* "Compressed ROMFS" */ + struct cramfs_info fsid; /* unique filesystem info */ + __u8 name[16]; /* user-defined name */ + struct cramfs_inode root; /* root inode data */ +}; + +/* + * Feature flags + * + * 0x00000000 - 0x000000ff: features that work for all past kernels + * 0x00000100 - 0xffffffff: features that don't work for past kernels + */ +#define CRAMFS_FLAG_FSID_VERSION_2 0x00000001 /* fsid version #2 */ +#define CRAMFS_FLAG_SORTED_DIRS 0x00000002 /* sorted dirs */ +#define CRAMFS_FLAG_HOLES 0x00000100 /* support for holes */ +#define CRAMFS_FLAG_WRONG_SIGNATURE 0x00000200 /* reserved */ +#define CRAMFS_FLAG_SHIFTED_ROOT_OFFSET 0x00000400 /* shifted root fs */ + +/* + * Valid values in super.flags. Currently we refuse to mount + * if (flags & ~CRAMFS_SUPPORTED_FLAGS). Maybe that should be + * changed to test super.future instead. + */ +#define CRAMFS_SUPPORTED_FLAGS ( 0x000000ff \ + | CRAMFS_FLAG_HOLES \ + | CRAMFS_FLAG_WRONG_SIGNATURE \ + | CRAMFS_FLAG_SHIFTED_ROOT_OFFSET ) + + +#endif /* _UAPI__CRAMFS_H */ diff --git a/include/uapi/linux/cuda.h b/include/uapi/linux/cuda.h new file mode 100644 index 00000000000..286f9f10fce --- /dev/null +++ b/include/uapi/linux/cuda.h @@ -0,0 +1,33 @@ +/* + * Definitions for talking to the CUDA. The CUDA is a microcontroller + * which controls the ADB, system power, RTC, and various other things. + * + * Copyright (C) 1996 Paul Mackerras. + */ + +#ifndef _UAPI_LINUX_CUDA_H +#define _UAPI_LINUX_CUDA_H + +/* CUDA commands (2nd byte) */ +#define CUDA_WARM_START 0 +#define CUDA_AUTOPOLL 1 +#define CUDA_GET_6805_ADDR 2 +#define CUDA_GET_TIME 3 +#define CUDA_GET_PRAM 7 +#define CUDA_SET_6805_ADDR 8 +#define CUDA_SET_TIME 9 +#define CUDA_POWERDOWN 0xa +#define CUDA_POWERUP_TIME 0xb +#define CUDA_SET_PRAM 0xc +#define CUDA_MS_RESET 0xd +#define CUDA_SEND_DFAC 0xe +#define CUDA_RESET_SYSTEM 0x11 +#define CUDA_SET_IPL 0x12 +#define CUDA_SET_AUTO_RATE 0x14 +#define CUDA_GET_AUTO_RATE 0x16 +#define CUDA_SET_DEVICE_LIST 0x19 +#define CUDA_GET_DEVICE_LIST 0x1a +#define CUDA_GET_SET_IIC 0x22 + + +#endif /* _UAPI_LINUX_CUDA_H */ diff --git a/include/uapi/linux/cyclades.h b/include/uapi/linux/cyclades.h new file mode 100644 index 00000000000..12b587aa361 --- /dev/null +++ b/include/uapi/linux/cyclades.h @@ -0,0 +1,493 @@ +/* $Revision: 3.0 $$Date: 1998/11/02 14:20:59 $ + * linux/include/linux/cyclades.h + * + * This file was initially written by + * Randolph Bentson <bentson@grieg.seaslug.org> and is maintained by + * Ivan Passos <ivan@cyclades.com>. + * + * This file contains the general definitions for the cyclades.c driver + *$Log: cyclades.h,v $ + *Revision 3.1 2002/01/29 11:36:16 henrique + *added throttle field on struct cyclades_port to indicate whether the + *port is throttled or not + * + *Revision 3.1 2000/04/19 18:52:52 ivan + *converted address fields to unsigned long and added fields for physical + *addresses on cyclades_card structure; + * + *Revision 3.0 1998/11/02 14:20:59 ivan + *added nports field on cyclades_card structure; + * + *Revision 2.5 1998/08/03 16:57:01 ivan + *added cyclades_idle_stats structure; + * + *Revision 2.4 1998/06/01 12:09:53 ivan + *removed closing_wait2 from cyclades_port structure; + * + *Revision 2.3 1998/03/16 18:01:12 ivan + *changes in the cyclades_port structure to get it closer to the + *standard serial port structure; + *added constants for new ioctls; + * + *Revision 2.2 1998/02/17 16:50:00 ivan + *changes in the cyclades_port structure (addition of shutdown_wait and + *chip_rev variables); + *added constants for new ioctls and for CD1400 rev. numbers. + * + *Revision 2.1 1997/10/24 16:03:00 ivan + *added rflow (which allows enabling the CD1400 special flow control + *feature) and rtsdtr_inv (which allows DTR/RTS pin inversion) to + *cyclades_port structure; + *added Alpha support + * + *Revision 2.0 1997/06/30 10:30:00 ivan + *added some new doorbell command constants related to IOCTLW and + *UART error signaling + * + *Revision 1.8 1997/06/03 15:30:00 ivan + *added constant ZFIRM_HLT + *added constant CyPCI_Ze_win ( = 2 * Cy_PCI_Zwin) + * + *Revision 1.7 1997/03/26 10:30:00 daniel + *new entries at the end of cyclades_port struct to reallocate + *variables illegally allocated within card memory. + * + *Revision 1.6 1996/09/09 18:35:30 bentson + *fold in changes for Cyclom-Z -- including structures for + *communicating with board as well modest changes to original + *structures to support new features. + * + *Revision 1.5 1995/11/13 21:13:31 bentson + *changes suggested by Michael Chastain <mec@duracef.shout.net> + *to support use of this file in non-kernel applications + * + * + */ + +#ifndef _UAPI_LINUX_CYCLADES_H +#define _UAPI_LINUX_CYCLADES_H + +#include <linux/types.h> + +struct cyclades_monitor { + unsigned long int_count; + unsigned long char_count; + unsigned long char_max; + unsigned long char_last; +}; + +/* + * These stats all reflect activity since the device was last initialized. + * (i.e., since the port was opened with no other processes already having it + * open) + */ +struct cyclades_idle_stats { + __kernel_time_t in_use; /* Time device has been in use (secs) */ + __kernel_time_t recv_idle; /* Time since last char received (secs) */ + __kernel_time_t xmit_idle; /* Time since last char transmitted (secs) */ + unsigned long recv_bytes; /* Bytes received */ + unsigned long xmit_bytes; /* Bytes transmitted */ + unsigned long overruns; /* Input overruns */ + unsigned long frame_errs; /* Input framing errors */ + unsigned long parity_errs; /* Input parity errors */ +}; + +#define CYCLADES_MAGIC 0x4359 + +#define CYGETMON 0x435901 +#define CYGETTHRESH 0x435902 +#define CYSETTHRESH 0x435903 +#define CYGETDEFTHRESH 0x435904 +#define CYSETDEFTHRESH 0x435905 +#define CYGETTIMEOUT 0x435906 +#define CYSETTIMEOUT 0x435907 +#define CYGETDEFTIMEOUT 0x435908 +#define CYSETDEFTIMEOUT 0x435909 +#define CYSETRFLOW 0x43590a +#define CYGETRFLOW 0x43590b +#define CYSETRTSDTR_INV 0x43590c +#define CYGETRTSDTR_INV 0x43590d +#define CYZSETPOLLCYCLE 0x43590e +#define CYZGETPOLLCYCLE 0x43590f +#define CYGETCD1400VER 0x435910 +#define CYSETWAIT 0x435912 +#define CYGETWAIT 0x435913 + +/*************** CYCLOM-Z ADDITIONS ***************/ + +#define CZIOC ('M' << 8) +#define CZ_NBOARDS (CZIOC|0xfa) +#define CZ_BOOT_START (CZIOC|0xfb) +#define CZ_BOOT_DATA (CZIOC|0xfc) +#define CZ_BOOT_END (CZIOC|0xfd) +#define CZ_TEST (CZIOC|0xfe) + +#define CZ_DEF_POLL (HZ/25) + +#define MAX_BOARD 4 /* Max number of boards */ +#define MAX_DEV 256 /* Max number of ports total */ +#define CYZ_MAX_SPEED 921600 + +#define CYZ_FIFO_SIZE 16 + +#define CYZ_BOOT_NWORDS 0x100 +struct CYZ_BOOT_CTRL { + unsigned short nboard; + int status[MAX_BOARD]; + int nchannel[MAX_BOARD]; + int fw_rev[MAX_BOARD]; + unsigned long offset; + unsigned long data[CYZ_BOOT_NWORDS]; +}; + + +#ifndef DP_WINDOW_SIZE +/* + * Memory Window Sizes + */ + +#define DP_WINDOW_SIZE (0x00080000) /* window size 512 Kb */ +#define ZE_DP_WINDOW_SIZE (0x00100000) /* window size 1 Mb (Ze and + 8Zo V.2 */ +#define CTRL_WINDOW_SIZE (0x00000080) /* runtime regs 128 bytes */ + +/* + * CUSTOM_REG - Cyclom-Z/PCI Custom Registers Set. The driver + * normally will access only interested on the fpga_id, fpga_version, + * start_cpu and stop_cpu. + */ + +struct CUSTOM_REG { + __u32 fpga_id; /* FPGA Identification Register */ + __u32 fpga_version; /* FPGA Version Number Register */ + __u32 cpu_start; /* CPU start Register (write) */ + __u32 cpu_stop; /* CPU stop Register (write) */ + __u32 misc_reg; /* Miscellaneous Register */ + __u32 idt_mode; /* IDT mode Register */ + __u32 uart_irq_status; /* UART IRQ status Register */ + __u32 clear_timer0_irq; /* Clear timer interrupt Register */ + __u32 clear_timer1_irq; /* Clear timer interrupt Register */ + __u32 clear_timer2_irq; /* Clear timer interrupt Register */ + __u32 test_register; /* Test Register */ + __u32 test_count; /* Test Count Register */ + __u32 timer_select; /* Timer select register */ + __u32 pr_uart_irq_status; /* Prioritized UART IRQ stat Reg */ + __u32 ram_wait_state; /* RAM wait-state Register */ + __u32 uart_wait_state; /* UART wait-state Register */ + __u32 timer_wait_state; /* timer wait-state Register */ + __u32 ack_wait_state; /* ACK wait State Register */ +}; + +/* + * RUNTIME_9060 - PLX PCI9060ES local configuration and shared runtime + * registers. This structure can be used to access the 9060 registers + * (memory mapped). + */ + +struct RUNTIME_9060 { + __u32 loc_addr_range; /* 00h - Local Address Range */ + __u32 loc_addr_base; /* 04h - Local Address Base */ + __u32 loc_arbitr; /* 08h - Local Arbitration */ + __u32 endian_descr; /* 0Ch - Big/Little Endian Descriptor */ + __u32 loc_rom_range; /* 10h - Local ROM Range */ + __u32 loc_rom_base; /* 14h - Local ROM Base */ + __u32 loc_bus_descr; /* 18h - Local Bus descriptor */ + __u32 loc_range_mst; /* 1Ch - Local Range for Master to PCI */ + __u32 loc_base_mst; /* 20h - Local Base for Master PCI */ + __u32 loc_range_io; /* 24h - Local Range for Master IO */ + __u32 pci_base_mst; /* 28h - PCI Base for Master PCI */ + __u32 pci_conf_io; /* 2Ch - PCI configuration for Master IO */ + __u32 filler1; /* 30h */ + __u32 filler2; /* 34h */ + __u32 filler3; /* 38h */ + __u32 filler4; /* 3Ch */ + __u32 mail_box_0; /* 40h - Mail Box 0 */ + __u32 mail_box_1; /* 44h - Mail Box 1 */ + __u32 mail_box_2; /* 48h - Mail Box 2 */ + __u32 mail_box_3; /* 4Ch - Mail Box 3 */ + __u32 filler5; /* 50h */ + __u32 filler6; /* 54h */ + __u32 filler7; /* 58h */ + __u32 filler8; /* 5Ch */ + __u32 pci_doorbell; /* 60h - PCI to Local Doorbell */ + __u32 loc_doorbell; /* 64h - Local to PCI Doorbell */ + __u32 intr_ctrl_stat; /* 68h - Interrupt Control/Status */ + __u32 init_ctrl; /* 6Ch - EEPROM control, Init Control, etc */ +}; + +/* Values for the Local Base Address re-map register */ + +#define WIN_RAM 0x00000001L /* set the sliding window to RAM */ +#define WIN_CREG 0x14000001L /* set the window to custom Registers */ + +/* Values timer select registers */ + +#define TIMER_BY_1M 0x00 /* clock divided by 1M */ +#define TIMER_BY_256K 0x01 /* clock divided by 256k */ +#define TIMER_BY_128K 0x02 /* clock divided by 128k */ +#define TIMER_BY_32K 0x03 /* clock divided by 32k */ + +/****************** ****************** *******************/ +#endif + +#ifndef ZFIRM_ID +/* #include "zfwint.h" */ +/****************** ****************** *******************/ +/* + * This file contains the definitions for interfacing with the + * Cyclom-Z ZFIRM Firmware. + */ + +/* General Constant definitions */ + +#define MAX_CHAN 64 /* max number of channels per board */ + +/* firmware id structure (set after boot) */ + +#define ID_ADDRESS 0x00000180L /* signature/pointer address */ +#define ZFIRM_ID 0x5557465AL /* ZFIRM/U signature */ +#define ZFIRM_HLT 0x59505B5CL /* ZFIRM needs external power supply */ +#define ZFIRM_RST 0x56040674L /* RST signal (due to FW reset) */ + +#define ZF_TINACT_DEF 1000 /* default inactivity timeout + (1000 ms) */ +#define ZF_TINACT ZF_TINACT_DEF + +struct FIRM_ID { + __u32 signature; /* ZFIRM/U signature */ + __u32 zfwctrl_addr; /* pointer to ZFW_CTRL structure */ +}; + +/* Op. System id */ + +#define C_OS_LINUX 0x00000030 /* generic Linux system */ + +/* channel op_mode */ + +#define C_CH_DISABLE 0x00000000 /* channel is disabled */ +#define C_CH_TXENABLE 0x00000001 /* channel Tx enabled */ +#define C_CH_RXENABLE 0x00000002 /* channel Rx enabled */ +#define C_CH_ENABLE 0x00000003 /* channel Tx/Rx enabled */ +#define C_CH_LOOPBACK 0x00000004 /* Loopback mode */ + +/* comm_parity - parity */ + +#define C_PR_NONE 0x00000000 /* None */ +#define C_PR_ODD 0x00000001 /* Odd */ +#define C_PR_EVEN 0x00000002 /* Even */ +#define C_PR_MARK 0x00000004 /* Mark */ +#define C_PR_SPACE 0x00000008 /* Space */ +#define C_PR_PARITY 0x000000ff + +#define C_PR_DISCARD 0x00000100 /* discard char with frame/par error */ +#define C_PR_IGNORE 0x00000200 /* ignore frame/par error */ + +/* comm_data_l - data length and stop bits */ + +#define C_DL_CS5 0x00000001 +#define C_DL_CS6 0x00000002 +#define C_DL_CS7 0x00000004 +#define C_DL_CS8 0x00000008 +#define C_DL_CS 0x0000000f +#define C_DL_1STOP 0x00000010 +#define C_DL_15STOP 0x00000020 +#define C_DL_2STOP 0x00000040 +#define C_DL_STOP 0x000000f0 + +/* interrupt enabling/status */ + +#define C_IN_DISABLE 0x00000000 /* zero, disable interrupts */ +#define C_IN_TXBEMPTY 0x00000001 /* tx buffer empty */ +#define C_IN_TXLOWWM 0x00000002 /* tx buffer below LWM */ +#define C_IN_RXHIWM 0x00000010 /* rx buffer above HWM */ +#define C_IN_RXNNDT 0x00000020 /* rx no new data timeout */ +#define C_IN_MDCD 0x00000100 /* modem DCD change */ +#define C_IN_MDSR 0x00000200 /* modem DSR change */ +#define C_IN_MRI 0x00000400 /* modem RI change */ +#define C_IN_MCTS 0x00000800 /* modem CTS change */ +#define C_IN_RXBRK 0x00001000 /* Break received */ +#define C_IN_PR_ERROR 0x00002000 /* parity error */ +#define C_IN_FR_ERROR 0x00004000 /* frame error */ +#define C_IN_OVR_ERROR 0x00008000 /* overrun error */ +#define C_IN_RXOFL 0x00010000 /* RX buffer overflow */ +#define C_IN_IOCTLW 0x00020000 /* I/O control w/ wait */ +#define C_IN_MRTS 0x00040000 /* modem RTS drop */ +#define C_IN_ICHAR 0x00080000 + +/* flow control */ + +#define C_FL_OXX 0x00000001 /* output Xon/Xoff flow control */ +#define C_FL_IXX 0x00000002 /* output Xon/Xoff flow control */ +#define C_FL_OIXANY 0x00000004 /* output Xon/Xoff (any xon) */ +#define C_FL_SWFLOW 0x0000000f + +/* flow status */ + +#define C_FS_TXIDLE 0x00000000 /* no Tx data in the buffer or UART */ +#define C_FS_SENDING 0x00000001 /* UART is sending data */ +#define C_FS_SWFLOW 0x00000002 /* Tx is stopped by received Xoff */ + +/* rs_control/rs_status RS-232 signals */ + +#define C_RS_PARAM 0x80000000 /* Indicates presence of parameter in + IOCTLM command */ +#define C_RS_RTS 0x00000001 /* RTS */ +#define C_RS_DTR 0x00000004 /* DTR */ +#define C_RS_DCD 0x00000100 /* CD */ +#define C_RS_DSR 0x00000200 /* DSR */ +#define C_RS_RI 0x00000400 /* RI */ +#define C_RS_CTS 0x00000800 /* CTS */ + +/* commands Host <-> Board */ + +#define C_CM_RESET 0x01 /* reset/flush buffers */ +#define C_CM_IOCTL 0x02 /* re-read CH_CTRL */ +#define C_CM_IOCTLW 0x03 /* re-read CH_CTRL, intr when done */ +#define C_CM_IOCTLM 0x04 /* RS-232 outputs change */ +#define C_CM_SENDXOFF 0x10 /* send Xoff */ +#define C_CM_SENDXON 0x11 /* send Xon */ +#define C_CM_CLFLOW 0x12 /* Clear flow control (resume) */ +#define C_CM_SENDBRK 0x41 /* send break */ +#define C_CM_INTBACK 0x42 /* Interrupt back */ +#define C_CM_SET_BREAK 0x43 /* Tx break on */ +#define C_CM_CLR_BREAK 0x44 /* Tx break off */ +#define C_CM_CMD_DONE 0x45 /* Previous command done */ +#define C_CM_INTBACK2 0x46 /* Alternate Interrupt back */ +#define C_CM_TINACT 0x51 /* set inactivity detection */ +#define C_CM_IRQ_ENBL 0x52 /* enable generation of interrupts */ +#define C_CM_IRQ_DSBL 0x53 /* disable generation of interrupts */ +#define C_CM_ACK_ENBL 0x54 /* enable acknowledged interrupt mode */ +#define C_CM_ACK_DSBL 0x55 /* disable acknowledged intr mode */ +#define C_CM_FLUSH_RX 0x56 /* flushes Rx buffer */ +#define C_CM_FLUSH_TX 0x57 /* flushes Tx buffer */ +#define C_CM_Q_ENABLE 0x58 /* enables queue access from the + driver */ +#define C_CM_Q_DISABLE 0x59 /* disables queue access from the + driver */ + +#define C_CM_TXBEMPTY 0x60 /* Tx buffer is empty */ +#define C_CM_TXLOWWM 0x61 /* Tx buffer low water mark */ +#define C_CM_RXHIWM 0x62 /* Rx buffer high water mark */ +#define C_CM_RXNNDT 0x63 /* rx no new data timeout */ +#define C_CM_TXFEMPTY 0x64 +#define C_CM_ICHAR 0x65 +#define C_CM_MDCD 0x70 /* modem DCD change */ +#define C_CM_MDSR 0x71 /* modem DSR change */ +#define C_CM_MRI 0x72 /* modem RI change */ +#define C_CM_MCTS 0x73 /* modem CTS change */ +#define C_CM_MRTS 0x74 /* modem RTS drop */ +#define C_CM_RXBRK 0x84 /* Break received */ +#define C_CM_PR_ERROR 0x85 /* Parity error */ +#define C_CM_FR_ERROR 0x86 /* Frame error */ +#define C_CM_OVR_ERROR 0x87 /* Overrun error */ +#define C_CM_RXOFL 0x88 /* RX buffer overflow */ +#define C_CM_CMDERROR 0x90 /* command error */ +#define C_CM_FATAL 0x91 /* fatal error */ +#define C_CM_HW_RESET 0x92 /* reset board */ + +/* + * CH_CTRL - This per port structure contains all parameters + * that control an specific port. It can be seen as the + * configuration registers of a "super-serial-controller". + */ + +struct CH_CTRL { + __u32 op_mode; /* operation mode */ + __u32 intr_enable; /* interrupt masking */ + __u32 sw_flow; /* SW flow control */ + __u32 flow_status; /* output flow status */ + __u32 comm_baud; /* baud rate - numerically specified */ + __u32 comm_parity; /* parity */ + __u32 comm_data_l; /* data length/stop */ + __u32 comm_flags; /* other flags */ + __u32 hw_flow; /* HW flow control */ + __u32 rs_control; /* RS-232 outputs */ + __u32 rs_status; /* RS-232 inputs */ + __u32 flow_xon; /* xon char */ + __u32 flow_xoff; /* xoff char */ + __u32 hw_overflow; /* hw overflow counter */ + __u32 sw_overflow; /* sw overflow counter */ + __u32 comm_error; /* frame/parity error counter */ + __u32 ichar; + __u32 filler[7]; +}; + + +/* + * BUF_CTRL - This per channel structure contains + * all Tx and Rx buffer control for a given channel. + */ + +struct BUF_CTRL { + __u32 flag_dma; /* buffers are in Host memory */ + __u32 tx_bufaddr; /* address of the tx buffer */ + __u32 tx_bufsize; /* tx buffer size */ + __u32 tx_threshold; /* tx low water mark */ + __u32 tx_get; /* tail index tx buf */ + __u32 tx_put; /* head index tx buf */ + __u32 rx_bufaddr; /* address of the rx buffer */ + __u32 rx_bufsize; /* rx buffer size */ + __u32 rx_threshold; /* rx high water mark */ + __u32 rx_get; /* tail index rx buf */ + __u32 rx_put; /* head index rx buf */ + __u32 filler[5]; /* filler to align structures */ +}; + +/* + * BOARD_CTRL - This per board structure contains all global + * control fields related to the board. + */ + +struct BOARD_CTRL { + + /* static info provided by the on-board CPU */ + __u32 n_channel; /* number of channels */ + __u32 fw_version; /* firmware version */ + + /* static info provided by the driver */ + __u32 op_system; /* op_system id */ + __u32 dr_version; /* driver version */ + + /* board control area */ + __u32 inactivity; /* inactivity control */ + + /* host to FW commands */ + __u32 hcmd_channel; /* channel number */ + __u32 hcmd_param; /* pointer to parameters */ + + /* FW to Host commands */ + __u32 fwcmd_channel; /* channel number */ + __u32 fwcmd_param; /* pointer to parameters */ + __u32 zf_int_queue_addr; /* offset for INT_QUEUE structure */ + + /* filler so the structures are aligned */ + __u32 filler[6]; +}; + +/* Host Interrupt Queue */ + +#define QUEUE_SIZE (10*MAX_CHAN) + +struct INT_QUEUE { + unsigned char intr_code[QUEUE_SIZE]; + unsigned long channel[QUEUE_SIZE]; + unsigned long param[QUEUE_SIZE]; + unsigned long put; + unsigned long get; +}; + +/* + * ZFW_CTRL - This is the data structure that includes all other + * data structures used by the Firmware. + */ + +struct ZFW_CTRL { + struct BOARD_CTRL board_ctrl; + struct CH_CTRL ch_ctrl[MAX_CHAN]; + struct BUF_CTRL buf_ctrl[MAX_CHAN]; +}; + +/****************** ****************** *******************/ +#endif + +#endif /* _UAPI_LINUX_CYCLADES_H */ diff --git a/include/linux/cycx_cfm.h b/include/uapi/linux/cycx_cfm.h index 032d26ed838..032d26ed838 100644 --- a/include/linux/cycx_cfm.h +++ b/include/uapi/linux/cycx_cfm.h diff --git a/include/linux/dcbnl.h b/include/uapi/linux/dcbnl.h index 6bb43382f3f..6bb43382f3f 100644 --- a/include/linux/dcbnl.h +++ b/include/uapi/linux/dcbnl.h diff --git a/include/uapi/linux/dccp.h b/include/uapi/linux/dccp.h new file mode 100644 index 00000000000..52a9cd7307e --- /dev/null +++ b/include/uapi/linux/dccp.h @@ -0,0 +1,237 @@ +#ifndef _UAPI_LINUX_DCCP_H +#define _UAPI_LINUX_DCCP_H + +#include <linux/types.h> +#include <asm/byteorder.h> + +/** + * struct dccp_hdr - generic part of DCCP packet header + * + * @dccph_sport - Relevant port on the endpoint that sent this packet + * @dccph_dport - Relevant port on the other endpoint + * @dccph_doff - Data Offset from the start of the DCCP header, in 32-bit words + * @dccph_ccval - Used by the HC-Sender CCID + * @dccph_cscov - Parts of the packet that are covered by the Checksum field + * @dccph_checksum - Internet checksum, depends on dccph_cscov + * @dccph_x - 0 = 24 bit sequence number, 1 = 48 + * @dccph_type - packet type, see DCCP_PKT_ prefixed macros + * @dccph_seq - sequence number high or low order 24 bits, depends on dccph_x + */ +struct dccp_hdr { + __be16 dccph_sport, + dccph_dport; + __u8 dccph_doff; +#if defined(__LITTLE_ENDIAN_BITFIELD) + __u8 dccph_cscov:4, + dccph_ccval:4; +#elif defined(__BIG_ENDIAN_BITFIELD) + __u8 dccph_ccval:4, + dccph_cscov:4; +#else +#error "Adjust your <asm/byteorder.h> defines" +#endif + __sum16 dccph_checksum; +#if defined(__LITTLE_ENDIAN_BITFIELD) + __u8 dccph_x:1, + dccph_type:4, + dccph_reserved:3; +#elif defined(__BIG_ENDIAN_BITFIELD) + __u8 dccph_reserved:3, + dccph_type:4, + dccph_x:1; +#else +#error "Adjust your <asm/byteorder.h> defines" +#endif + __u8 dccph_seq2; + __be16 dccph_seq; +}; + +/** + * struct dccp_hdr_ext - the low bits of a 48 bit seq packet + * + * @dccph_seq_low - low 24 bits of a 48 bit seq packet + */ +struct dccp_hdr_ext { + __be32 dccph_seq_low; +}; + +/** + * struct dccp_hdr_request - Connection initiation request header + * + * @dccph_req_service - Service to which the client app wants to connect + */ +struct dccp_hdr_request { + __be32 dccph_req_service; +}; +/** + * struct dccp_hdr_ack_bits - acknowledgment bits common to most packets + * + * @dccph_resp_ack_nr_high - 48 bit ack number high order bits, contains GSR + * @dccph_resp_ack_nr_low - 48 bit ack number low order bits, contains GSR + */ +struct dccp_hdr_ack_bits { + __be16 dccph_reserved1; + __be16 dccph_ack_nr_high; + __be32 dccph_ack_nr_low; +}; +/** + * struct dccp_hdr_response - Connection initiation response header + * + * @dccph_resp_ack - 48 bit Acknowledgment Number Subheader (5.3) + * @dccph_resp_service - Echoes the Service Code on a received DCCP-Request + */ +struct dccp_hdr_response { + struct dccp_hdr_ack_bits dccph_resp_ack; + __be32 dccph_resp_service; +}; + +/** + * struct dccp_hdr_reset - Unconditionally shut down a connection + * + * @dccph_reset_ack - 48 bit Acknowledgment Number Subheader (5.6) + * @dccph_reset_code - one of %dccp_reset_codes + * @dccph_reset_data - the Data 1 ... Data 3 fields from 5.6 + */ +struct dccp_hdr_reset { + struct dccp_hdr_ack_bits dccph_reset_ack; + __u8 dccph_reset_code, + dccph_reset_data[3]; +}; + +enum dccp_pkt_type { + DCCP_PKT_REQUEST = 0, + DCCP_PKT_RESPONSE, + DCCP_PKT_DATA, + DCCP_PKT_ACK, + DCCP_PKT_DATAACK, + DCCP_PKT_CLOSEREQ, + DCCP_PKT_CLOSE, + DCCP_PKT_RESET, + DCCP_PKT_SYNC, + DCCP_PKT_SYNCACK, + DCCP_PKT_INVALID, +}; + +#define DCCP_NR_PKT_TYPES DCCP_PKT_INVALID + +static inline unsigned int dccp_packet_hdr_len(const __u8 type) +{ + if (type == DCCP_PKT_DATA) + return 0; + if (type == DCCP_PKT_DATAACK || + type == DCCP_PKT_ACK || + type == DCCP_PKT_SYNC || + type == DCCP_PKT_SYNCACK || + type == DCCP_PKT_CLOSE || + type == DCCP_PKT_CLOSEREQ) + return sizeof(struct dccp_hdr_ack_bits); + if (type == DCCP_PKT_REQUEST) + return sizeof(struct dccp_hdr_request); + if (type == DCCP_PKT_RESPONSE) + return sizeof(struct dccp_hdr_response); + return sizeof(struct dccp_hdr_reset); +} +enum dccp_reset_codes { + DCCP_RESET_CODE_UNSPECIFIED = 0, + DCCP_RESET_CODE_CLOSED, + DCCP_RESET_CODE_ABORTED, + DCCP_RESET_CODE_NO_CONNECTION, + DCCP_RESET_CODE_PACKET_ERROR, + DCCP_RESET_CODE_OPTION_ERROR, + DCCP_RESET_CODE_MANDATORY_ERROR, + DCCP_RESET_CODE_CONNECTION_REFUSED, + DCCP_RESET_CODE_BAD_SERVICE_CODE, + DCCP_RESET_CODE_TOO_BUSY, + DCCP_RESET_CODE_BAD_INIT_COOKIE, + DCCP_RESET_CODE_AGGRESSION_PENALTY, + + DCCP_MAX_RESET_CODES /* Leave at the end! */ +}; + +/* DCCP options */ +enum { + DCCPO_PADDING = 0, + DCCPO_MANDATORY = 1, + DCCPO_MIN_RESERVED = 3, + DCCPO_MAX_RESERVED = 31, + DCCPO_CHANGE_L = 32, + DCCPO_CONFIRM_L = 33, + DCCPO_CHANGE_R = 34, + DCCPO_CONFIRM_R = 35, + DCCPO_NDP_COUNT = 37, + DCCPO_ACK_VECTOR_0 = 38, + DCCPO_ACK_VECTOR_1 = 39, + DCCPO_TIMESTAMP = 41, + DCCPO_TIMESTAMP_ECHO = 42, + DCCPO_ELAPSED_TIME = 43, + DCCPO_MAX = 45, + DCCPO_MIN_RX_CCID_SPECIFIC = 128, /* from sender to receiver */ + DCCPO_MAX_RX_CCID_SPECIFIC = 191, + DCCPO_MIN_TX_CCID_SPECIFIC = 192, /* from receiver to sender */ + DCCPO_MAX_TX_CCID_SPECIFIC = 255, +}; +/* maximum size of a single TLV-encoded DCCP option (sans type/len bytes) */ +#define DCCP_SINGLE_OPT_MAXLEN 253 + +/* DCCP CCIDS */ +enum { + DCCPC_CCID2 = 2, + DCCPC_CCID3 = 3, +}; + +/* DCCP features (RFC 4340 section 6.4) */ +enum dccp_feature_numbers { + DCCPF_RESERVED = 0, + DCCPF_CCID = 1, + DCCPF_SHORT_SEQNOS = 2, + DCCPF_SEQUENCE_WINDOW = 3, + DCCPF_ECN_INCAPABLE = 4, + DCCPF_ACK_RATIO = 5, + DCCPF_SEND_ACK_VECTOR = 6, + DCCPF_SEND_NDP_COUNT = 7, + DCCPF_MIN_CSUM_COVER = 8, + DCCPF_DATA_CHECKSUM = 9, + /* 10-127 reserved */ + DCCPF_MIN_CCID_SPECIFIC = 128, + DCCPF_SEND_LEV_RATE = 192, /* RFC 4342, sec. 8.4 */ + DCCPF_MAX_CCID_SPECIFIC = 255, +}; + +/* DCCP socket control message types for cmsg */ +enum dccp_cmsg_type { + DCCP_SCM_PRIORITY = 1, + DCCP_SCM_QPOLICY_MAX = 0xFFFF, + /* ^-- Up to here reserved exclusively for qpolicy parameters */ + DCCP_SCM_MAX +}; + +/* DCCP priorities for outgoing/queued packets */ +enum dccp_packet_dequeueing_policy { + DCCPQ_POLICY_SIMPLE, + DCCPQ_POLICY_PRIO, + DCCPQ_POLICY_MAX +}; + +/* DCCP socket options */ +#define DCCP_SOCKOPT_PACKET_SIZE 1 /* XXX deprecated, without effect */ +#define DCCP_SOCKOPT_SERVICE 2 +#define DCCP_SOCKOPT_CHANGE_L 3 +#define DCCP_SOCKOPT_CHANGE_R 4 +#define DCCP_SOCKOPT_GET_CUR_MPS 5 +#define DCCP_SOCKOPT_SERVER_TIMEWAIT 6 +#define DCCP_SOCKOPT_SEND_CSCOV 10 +#define DCCP_SOCKOPT_RECV_CSCOV 11 +#define DCCP_SOCKOPT_AVAILABLE_CCIDS 12 +#define DCCP_SOCKOPT_CCID 13 +#define DCCP_SOCKOPT_TX_CCID 14 +#define DCCP_SOCKOPT_RX_CCID 15 +#define DCCP_SOCKOPT_QPOLICY_ID 16 +#define DCCP_SOCKOPT_QPOLICY_TXQLEN 17 +#define DCCP_SOCKOPT_CCID_RX_INFO 128 +#define DCCP_SOCKOPT_CCID_TX_INFO 192 + +/* maximum number of services provided on the same listening port */ +#define DCCP_SERVICE_LIST_MAX_LEN 32 + + +#endif /* _UAPI_LINUX_DCCP_H */ diff --git a/include/uapi/linux/dlm.h b/include/uapi/linux/dlm.h new file mode 100644 index 00000000000..1f73cc06168 --- /dev/null +++ b/include/uapi/linux/dlm.h @@ -0,0 +1,75 @@ +/****************************************************************************** +******************************************************************************* +** +** Copyright (C) Sistina Software, Inc. 1997-2003 All rights reserved. +** Copyright (C) 2004-2011 Red Hat, Inc. All rights reserved. +** +** This copyrighted material is made available to anyone wishing to use, +** modify, copy, or redistribute it subject to the terms and conditions +** of the GNU General Public License v.2. +** +******************************************************************************* +******************************************************************************/ + +#ifndef _UAPI__DLM_DOT_H__ +#define _UAPI__DLM_DOT_H__ + +/* + * Interface to Distributed Lock Manager (DLM) + * routines and structures to use DLM lockspaces + */ + +/* Lock levels and flags are here */ +#include <linux/dlmconstants.h> +#include <linux/types.h> + +typedef void dlm_lockspace_t; + +/* + * Lock status block + * + * Use this structure to specify the contents of the lock value block. For a + * conversion request, this structure is used to specify the lock ID of the + * lock. DLM writes the status of the lock request and the lock ID assigned + * to the request in the lock status block. + * + * sb_lkid: the returned lock ID. It is set on new (non-conversion) requests. + * It is available when dlm_lock returns. + * + * sb_lvbptr: saves or returns the contents of the lock's LVB according to rules + * shown for the DLM_LKF_VALBLK flag. + * + * sb_flags: DLM_SBF_DEMOTED is returned if in the process of promoting a lock, + * it was first demoted to NL to avoid conversion deadlock. + * DLM_SBF_VALNOTVALID is returned if the resource's LVB is marked invalid. + * + * sb_status: the returned status of the lock request set prior to AST + * execution. Possible return values: + * + * 0 if lock request was successful + * -EAGAIN if request would block and is flagged DLM_LKF_NOQUEUE + * -DLM_EUNLOCK if unlock request was successful + * -DLM_ECANCEL if a cancel completed successfully + * -EDEADLK if a deadlock was detected + * -ETIMEDOUT if the lock request was canceled due to a timeout + */ + +#define DLM_SBF_DEMOTED 0x01 +#define DLM_SBF_VALNOTVALID 0x02 +#define DLM_SBF_ALTMODE 0x04 + +struct dlm_lksb { + int sb_status; + __u32 sb_lkid; + char sb_flags; + char * sb_lvbptr; +}; + +/* dlm_new_lockspace() flags */ + +#define DLM_LSFL_TIMEWARN 0x00000002 +#define DLM_LSFL_FS 0x00000004 +#define DLM_LSFL_NEWEXCL 0x00000008 + + +#endif /* _UAPI__DLM_DOT_H__ */ diff --git a/include/linux/dlm_device.h b/include/uapi/linux/dlm_device.h index 3060783c419..3060783c419 100644 --- a/include/linux/dlm_device.h +++ b/include/uapi/linux/dlm_device.h diff --git a/include/linux/dlm_netlink.h b/include/uapi/linux/dlm_netlink.h index 647c8ef2722..647c8ef2722 100644 --- a/include/linux/dlm_netlink.h +++ b/include/uapi/linux/dlm_netlink.h diff --git a/include/uapi/linux/dlm_plock.h b/include/uapi/linux/dlm_plock.h new file mode 100644 index 00000000000..6ae692c909c --- /dev/null +++ b/include/uapi/linux/dlm_plock.h @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2005-2008 Red Hat, Inc. All rights reserved. + * + * This copyrighted material is made available to anyone wishing to use, + * modify, copy, or redistribute it subject to the terms and conditions + * of the GNU General Public License v.2. + */ + +#ifndef _UAPI__DLM_PLOCK_DOT_H__ +#define _UAPI__DLM_PLOCK_DOT_H__ + +#include <linux/types.h> + +#define DLM_PLOCK_MISC_NAME "dlm_plock" + +#define DLM_PLOCK_VERSION_MAJOR 1 +#define DLM_PLOCK_VERSION_MINOR 2 +#define DLM_PLOCK_VERSION_PATCH 0 + +enum { + DLM_PLOCK_OP_LOCK = 1, + DLM_PLOCK_OP_UNLOCK, + DLM_PLOCK_OP_GET, +}; + +#define DLM_PLOCK_FL_CLOSE 1 + +struct dlm_plock_info { + __u32 version[3]; + __u8 optype; + __u8 ex; + __u8 wait; + __u8 flags; + __u32 pid; + __s32 nodeid; + __s32 rv; + __u32 fsid; + __u64 number; + __u64 start; + __u64 end; + __u64 owner; +}; + + +#endif /* _UAPI__DLM_PLOCK_DOT_H__ */ diff --git a/include/linux/dlmconstants.h b/include/uapi/linux/dlmconstants.h index 47bf08dc756..47bf08dc756 100644 --- a/include/linux/dlmconstants.h +++ b/include/uapi/linux/dlmconstants.h diff --git a/include/linux/dm-ioctl.h b/include/uapi/linux/dm-ioctl.h index 91e3a360f61..91e3a360f61 100644 --- a/include/linux/dm-ioctl.h +++ b/include/uapi/linux/dm-ioctl.h diff --git a/include/linux/dm-log-userspace.h b/include/uapi/linux/dm-log-userspace.h index 0678c2adc42..0678c2adc42 100644 --- a/include/linux/dm-log-userspace.h +++ b/include/uapi/linux/dm-log-userspace.h diff --git a/include/linux/dn.h b/include/uapi/linux/dn.h index 9c50445462d..9c50445462d 100644 --- a/include/linux/dn.h +++ b/include/uapi/linux/dn.h diff --git a/include/linux/dqblk_xfs.h b/include/uapi/linux/dqblk_xfs.h index 86552807aed..86552807aed 100644 --- a/include/linux/dqblk_xfs.h +++ b/include/uapi/linux/dqblk_xfs.h diff --git a/include/uapi/linux/edd.h b/include/uapi/linux/edd.h new file mode 100644 index 00000000000..89240a04e4c --- /dev/null +++ b/include/uapi/linux/edd.h @@ -0,0 +1,191 @@ +/* + * linux/include/linux/edd.h + * Copyright (C) 2002, 2003, 2004 Dell Inc. + * by Matt Domsch <Matt_Domsch@dell.com> + * + * structures and definitions for the int 13h, ax={41,48}h + * BIOS Enhanced Disk Drive Services + * This is based on the T13 group document D1572 Revision 0 (August 14 2002) + * available at http://www.t13.org/docs2002/d1572r0.pdf. It is + * very similar to D1484 Revision 3 http://www.t13.org/docs2002/d1484r3.pdf + * + * In a nutshell, arch/{i386,x86_64}/boot/setup.S populates a scratch + * table in the boot_params that contains a list of BIOS-enumerated + * boot devices. + * In arch/{i386,x86_64}/kernel/setup.c, this information is + * transferred into the edd structure, and in drivers/firmware/edd.c, that + * information is used to identify BIOS boot disk. The code in setup.S + * is very sensitive to the size of these structures. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License v2.0 as published by + * the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ +#ifndef _UAPI_LINUX_EDD_H +#define _UAPI_LINUX_EDD_H + +#include <linux/types.h> + +#define EDDNR 0x1e9 /* addr of number of edd_info structs at EDDBUF + in boot_params - treat this as 1 byte */ +#define EDDBUF 0xd00 /* addr of edd_info structs in boot_params */ +#define EDDMAXNR 6 /* number of edd_info structs starting at EDDBUF */ +#define EDDEXTSIZE 8 /* change these if you muck with the structures */ +#define EDDPARMSIZE 74 +#define CHECKEXTENSIONSPRESENT 0x41 +#define GETDEVICEPARAMETERS 0x48 +#define LEGACYGETDEVICEPARAMETERS 0x08 +#define EDDMAGIC1 0x55AA +#define EDDMAGIC2 0xAA55 + + +#define READ_SECTORS 0x02 /* int13 AH=0x02 is READ_SECTORS command */ +#define EDD_MBR_SIG_OFFSET 0x1B8 /* offset of signature in the MBR */ +#define EDD_MBR_SIG_BUF 0x290 /* addr in boot params */ +#define EDD_MBR_SIG_MAX 16 /* max number of signatures to store */ +#define EDD_MBR_SIG_NR_BUF 0x1ea /* addr of number of MBR signtaures at EDD_MBR_SIG_BUF + in boot_params - treat this as 1 byte */ + +#ifndef __ASSEMBLY__ + +#define EDD_EXT_FIXED_DISK_ACCESS (1 << 0) +#define EDD_EXT_DEVICE_LOCKING_AND_EJECTING (1 << 1) +#define EDD_EXT_ENHANCED_DISK_DRIVE_SUPPORT (1 << 2) +#define EDD_EXT_64BIT_EXTENSIONS (1 << 3) + +#define EDD_INFO_DMA_BOUNDARY_ERROR_TRANSPARENT (1 << 0) +#define EDD_INFO_GEOMETRY_VALID (1 << 1) +#define EDD_INFO_REMOVABLE (1 << 2) +#define EDD_INFO_WRITE_VERIFY (1 << 3) +#define EDD_INFO_MEDIA_CHANGE_NOTIFICATION (1 << 4) +#define EDD_INFO_LOCKABLE (1 << 5) +#define EDD_INFO_NO_MEDIA_PRESENT (1 << 6) +#define EDD_INFO_USE_INT13_FN50 (1 << 7) + +struct edd_device_params { + __u16 length; + __u16 info_flags; + __u32 num_default_cylinders; + __u32 num_default_heads; + __u32 sectors_per_track; + __u64 number_of_sectors; + __u16 bytes_per_sector; + __u32 dpte_ptr; /* 0xFFFFFFFF for our purposes */ + __u16 key; /* = 0xBEDD */ + __u8 device_path_info_length; /* = 44 */ + __u8 reserved2; + __u16 reserved3; + __u8 host_bus_type[4]; + __u8 interface_type[8]; + union { + struct { + __u16 base_address; + __u16 reserved1; + __u32 reserved2; + } __attribute__ ((packed)) isa; + struct { + __u8 bus; + __u8 slot; + __u8 function; + __u8 channel; + __u32 reserved; + } __attribute__ ((packed)) pci; + /* pcix is same as pci */ + struct { + __u64 reserved; + } __attribute__ ((packed)) ibnd; + struct { + __u64 reserved; + } __attribute__ ((packed)) xprs; + struct { + __u64 reserved; + } __attribute__ ((packed)) htpt; + struct { + __u64 reserved; + } __attribute__ ((packed)) unknown; + } interface_path; + union { + struct { + __u8 device; + __u8 reserved1; + __u16 reserved2; + __u32 reserved3; + __u64 reserved4; + } __attribute__ ((packed)) ata; + struct { + __u8 device; + __u8 lun; + __u8 reserved1; + __u8 reserved2; + __u32 reserved3; + __u64 reserved4; + } __attribute__ ((packed)) atapi; + struct { + __u16 id; + __u64 lun; + __u16 reserved1; + __u32 reserved2; + } __attribute__ ((packed)) scsi; + struct { + __u64 serial_number; + __u64 reserved; + } __attribute__ ((packed)) usb; + struct { + __u64 eui; + __u64 reserved; + } __attribute__ ((packed)) i1394; + struct { + __u64 wwid; + __u64 lun; + } __attribute__ ((packed)) fibre; + struct { + __u64 identity_tag; + __u64 reserved; + } __attribute__ ((packed)) i2o; + struct { + __u32 array_number; + __u32 reserved1; + __u64 reserved2; + } __attribute__ ((packed)) raid; + struct { + __u8 device; + __u8 reserved1; + __u16 reserved2; + __u32 reserved3; + __u64 reserved4; + } __attribute__ ((packed)) sata; + struct { + __u64 reserved1; + __u64 reserved2; + } __attribute__ ((packed)) unknown; + } device_path; + __u8 reserved4; + __u8 checksum; +} __attribute__ ((packed)); + +struct edd_info { + __u8 device; + __u8 version; + __u16 interface_support; + __u16 legacy_max_cylinder; + __u8 legacy_max_head; + __u8 legacy_sectors_per_track; + struct edd_device_params params; +} __attribute__ ((packed)); + +struct edd { + unsigned int mbr_signature[EDD_MBR_SIG_MAX]; + struct edd_info edd_info[EDDMAXNR]; + unsigned char mbr_signature_nr; + unsigned char edd_info_nr; +}; + +#endif /*!__ASSEMBLY__ */ + +#endif /* _UAPI_LINUX_EDD_H */ diff --git a/include/linux/efs_fs_sb.h b/include/uapi/linux/efs_fs_sb.h index a01be90c58c..a01be90c58c 100644 --- a/include/linux/efs_fs_sb.h +++ b/include/uapi/linux/efs_fs_sb.h diff --git a/include/linux/elf-em.h b/include/uapi/linux/elf-em.h index 8e2b7bac437..8e2b7bac437 100644 --- a/include/linux/elf-em.h +++ b/include/uapi/linux/elf-em.h diff --git a/include/linux/elf-fdpic.h b/include/uapi/linux/elf-fdpic.h index 7cd2e80cebc..1065078938f 100644 --- a/include/linux/elf-fdpic.h +++ b/include/uapi/linux/elf-fdpic.h @@ -31,6 +31,7 @@ struct elf32_fdpic_loadmap { #define ELF32_FDPIC_LOADMAP_VERSION 0x0000 +#ifndef __KERNEL__ /* * binfmt binary parameters structure */ @@ -58,7 +59,6 @@ struct elf_fdpic_params { #define ELF_FDPIC_FLAG_PRESENT 0x80000000 /* T if this object is present */ }; -#ifdef __KERNEL__ #ifdef CONFIG_MMU extern void elf_fdpic_arch_lay_out_mm(struct elf_fdpic_params *exec_params, struct elf_fdpic_params *interp_params, diff --git a/include/uapi/linux/elf.h b/include/uapi/linux/elf.h new file mode 100644 index 00000000000..126a8175e3e --- /dev/null +++ b/include/uapi/linux/elf.h @@ -0,0 +1,414 @@ +#ifndef _UAPI_LINUX_ELF_H +#define _UAPI_LINUX_ELF_H + +#include <linux/types.h> +#include <linux/elf-em.h> + +/* 32-bit ELF base types. */ +typedef __u32 Elf32_Addr; +typedef __u16 Elf32_Half; +typedef __u32 Elf32_Off; +typedef __s32 Elf32_Sword; +typedef __u32 Elf32_Word; + +/* 64-bit ELF base types. */ +typedef __u64 Elf64_Addr; +typedef __u16 Elf64_Half; +typedef __s16 Elf64_SHalf; +typedef __u64 Elf64_Off; +typedef __s32 Elf64_Sword; +typedef __u32 Elf64_Word; +typedef __u64 Elf64_Xword; +typedef __s64 Elf64_Sxword; + +/* These constants are for the segment types stored in the image headers */ +#define PT_NULL 0 +#define PT_LOAD 1 +#define PT_DYNAMIC 2 +#define PT_INTERP 3 +#define PT_NOTE 4 +#define PT_SHLIB 5 +#define PT_PHDR 6 +#define PT_TLS 7 /* Thread local storage segment */ +#define PT_LOOS 0x60000000 /* OS-specific */ +#define PT_HIOS 0x6fffffff /* OS-specific */ +#define PT_LOPROC 0x70000000 +#define PT_HIPROC 0x7fffffff +#define PT_GNU_EH_FRAME 0x6474e550 + +#define PT_GNU_STACK (PT_LOOS + 0x474e551) + +/* + * Extended Numbering + * + * If the real number of program header table entries is larger than + * or equal to PN_XNUM(0xffff), it is set to sh_info field of the + * section header at index 0, and PN_XNUM is set to e_phnum + * field. Otherwise, the section header at index 0 is zero + * initialized, if it exists. + * + * Specifications are available in: + * + * - Sun microsystems: Linker and Libraries. + * Part No: 817-1984-17, September 2008. + * URL: http://docs.sun.com/app/docs/doc/817-1984 + * + * - System V ABI AMD64 Architecture Processor Supplement + * Draft Version 0.99., + * May 11, 2009. + * URL: http://www.x86-64.org/ + */ +#define PN_XNUM 0xffff + +/* These constants define the different elf file types */ +#define ET_NONE 0 +#define ET_REL 1 +#define ET_EXEC 2 +#define ET_DYN 3 +#define ET_CORE 4 +#define ET_LOPROC 0xff00 +#define ET_HIPROC 0xffff + +/* This is the info that is needed to parse the dynamic section of the file */ +#define DT_NULL 0 +#define DT_NEEDED 1 +#define DT_PLTRELSZ 2 +#define DT_PLTGOT 3 +#define DT_HASH 4 +#define DT_STRTAB 5 +#define DT_SYMTAB 6 +#define DT_RELA 7 +#define DT_RELASZ 8 +#define DT_RELAENT 9 +#define DT_STRSZ 10 +#define DT_SYMENT 11 +#define DT_INIT 12 +#define DT_FINI 13 +#define DT_SONAME 14 +#define DT_RPATH 15 +#define DT_SYMBOLIC 16 +#define DT_REL 17 +#define DT_RELSZ 18 +#define DT_RELENT 19 +#define DT_PLTREL 20 +#define DT_DEBUG 21 +#define DT_TEXTREL 22 +#define DT_JMPREL 23 +#define DT_ENCODING 32 +#define OLD_DT_LOOS 0x60000000 +#define DT_LOOS 0x6000000d +#define DT_HIOS 0x6ffff000 +#define DT_VALRNGLO 0x6ffffd00 +#define DT_VALRNGHI 0x6ffffdff +#define DT_ADDRRNGLO 0x6ffffe00 +#define DT_ADDRRNGHI 0x6ffffeff +#define DT_VERSYM 0x6ffffff0 +#define DT_RELACOUNT 0x6ffffff9 +#define DT_RELCOUNT 0x6ffffffa +#define DT_FLAGS_1 0x6ffffffb +#define DT_VERDEF 0x6ffffffc +#define DT_VERDEFNUM 0x6ffffffd +#define DT_VERNEED 0x6ffffffe +#define DT_VERNEEDNUM 0x6fffffff +#define OLD_DT_HIOS 0x6fffffff +#define DT_LOPROC 0x70000000 +#define DT_HIPROC 0x7fffffff + +/* This info is needed when parsing the symbol table */ +#define STB_LOCAL 0 +#define STB_GLOBAL 1 +#define STB_WEAK 2 + +#define STT_NOTYPE 0 +#define STT_OBJECT 1 +#define STT_FUNC 2 +#define STT_SECTION 3 +#define STT_FILE 4 +#define STT_COMMON 5 +#define STT_TLS 6 + +#define ELF_ST_BIND(x) ((x) >> 4) +#define ELF_ST_TYPE(x) (((unsigned int) x) & 0xf) +#define ELF32_ST_BIND(x) ELF_ST_BIND(x) +#define ELF32_ST_TYPE(x) ELF_ST_TYPE(x) +#define ELF64_ST_BIND(x) ELF_ST_BIND(x) +#define ELF64_ST_TYPE(x) ELF_ST_TYPE(x) + +typedef struct dynamic{ + Elf32_Sword d_tag; + union{ + Elf32_Sword d_val; + Elf32_Addr d_ptr; + } d_un; +} Elf32_Dyn; + +typedef struct { + Elf64_Sxword d_tag; /* entry tag value */ + union { + Elf64_Xword d_val; + Elf64_Addr d_ptr; + } d_un; +} Elf64_Dyn; + +/* The following are used with relocations */ +#define ELF32_R_SYM(x) ((x) >> 8) +#define ELF32_R_TYPE(x) ((x) & 0xff) + +#define ELF64_R_SYM(i) ((i) >> 32) +#define ELF64_R_TYPE(i) ((i) & 0xffffffff) + +typedef struct elf32_rel { + Elf32_Addr r_offset; + Elf32_Word r_info; +} Elf32_Rel; + +typedef struct elf64_rel { + Elf64_Addr r_offset; /* Location at which to apply the action */ + Elf64_Xword r_info; /* index and type of relocation */ +} Elf64_Rel; + +typedef struct elf32_rela{ + Elf32_Addr r_offset; + Elf32_Word r_info; + Elf32_Sword r_addend; +} Elf32_Rela; + +typedef struct elf64_rela { + Elf64_Addr r_offset; /* Location at which to apply the action */ + Elf64_Xword r_info; /* index and type of relocation */ + Elf64_Sxword r_addend; /* Constant addend used to compute value */ +} Elf64_Rela; + +typedef struct elf32_sym{ + Elf32_Word st_name; + Elf32_Addr st_value; + Elf32_Word st_size; + unsigned char st_info; + unsigned char st_other; + Elf32_Half st_shndx; +} Elf32_Sym; + +typedef struct elf64_sym { + Elf64_Word st_name; /* Symbol name, index in string tbl */ + unsigned char st_info; /* Type and binding attributes */ + unsigned char st_other; /* No defined meaning, 0 */ + Elf64_Half st_shndx; /* Associated section index */ + Elf64_Addr st_value; /* Value of the symbol */ + Elf64_Xword st_size; /* Associated symbol size */ +} Elf64_Sym; + + +#define EI_NIDENT 16 + +typedef struct elf32_hdr{ + unsigned char e_ident[EI_NIDENT]; + Elf32_Half e_type; + Elf32_Half e_machine; + Elf32_Word e_version; + Elf32_Addr e_entry; /* Entry point */ + Elf32_Off e_phoff; + Elf32_Off e_shoff; + Elf32_Word e_flags; + Elf32_Half e_ehsize; + Elf32_Half e_phentsize; + Elf32_Half e_phnum; + Elf32_Half e_shentsize; + Elf32_Half e_shnum; + Elf32_Half e_shstrndx; +} Elf32_Ehdr; + +typedef struct elf64_hdr { + unsigned char e_ident[EI_NIDENT]; /* ELF "magic number" */ + Elf64_Half e_type; + Elf64_Half e_machine; + Elf64_Word e_version; + Elf64_Addr e_entry; /* Entry point virtual address */ + Elf64_Off e_phoff; /* Program header table file offset */ + Elf64_Off e_shoff; /* Section header table file offset */ + Elf64_Word e_flags; + Elf64_Half e_ehsize; + Elf64_Half e_phentsize; + Elf64_Half e_phnum; + Elf64_Half e_shentsize; + Elf64_Half e_shnum; + Elf64_Half e_shstrndx; +} Elf64_Ehdr; + +/* These constants define the permissions on sections in the program + header, p_flags. */ +#define PF_R 0x4 +#define PF_W 0x2 +#define PF_X 0x1 + +typedef struct elf32_phdr{ + Elf32_Word p_type; + Elf32_Off p_offset; + Elf32_Addr p_vaddr; + Elf32_Addr p_paddr; + Elf32_Word p_filesz; + Elf32_Word p_memsz; + Elf32_Word p_flags; + Elf32_Word p_align; +} Elf32_Phdr; + +typedef struct elf64_phdr { + Elf64_Word p_type; + Elf64_Word p_flags; + Elf64_Off p_offset; /* Segment file offset */ + Elf64_Addr p_vaddr; /* Segment virtual address */ + Elf64_Addr p_paddr; /* Segment physical address */ + Elf64_Xword p_filesz; /* Segment size in file */ + Elf64_Xword p_memsz; /* Segment size in memory */ + Elf64_Xword p_align; /* Segment alignment, file & memory */ +} Elf64_Phdr; + +/* sh_type */ +#define SHT_NULL 0 +#define SHT_PROGBITS 1 +#define SHT_SYMTAB 2 +#define SHT_STRTAB 3 +#define SHT_RELA 4 +#define SHT_HASH 5 +#define SHT_DYNAMIC 6 +#define SHT_NOTE 7 +#define SHT_NOBITS 8 +#define SHT_REL 9 +#define SHT_SHLIB 10 +#define SHT_DYNSYM 11 +#define SHT_NUM 12 +#define SHT_LOPROC 0x70000000 +#define SHT_HIPROC 0x7fffffff +#define SHT_LOUSER 0x80000000 +#define SHT_HIUSER 0xffffffff + +/* sh_flags */ +#define SHF_WRITE 0x1 +#define SHF_ALLOC 0x2 +#define SHF_EXECINSTR 0x4 +#define SHF_MASKPROC 0xf0000000 + +/* special section indexes */ +#define SHN_UNDEF 0 +#define SHN_LORESERVE 0xff00 +#define SHN_LOPROC 0xff00 +#define SHN_HIPROC 0xff1f +#define SHN_ABS 0xfff1 +#define SHN_COMMON 0xfff2 +#define SHN_HIRESERVE 0xffff + +typedef struct elf32_shdr { + Elf32_Word sh_name; + Elf32_Word sh_type; + Elf32_Word sh_flags; + Elf32_Addr sh_addr; + Elf32_Off sh_offset; + Elf32_Word sh_size; + Elf32_Word sh_link; + Elf32_Word sh_info; + Elf32_Word sh_addralign; + Elf32_Word sh_entsize; +} Elf32_Shdr; + +typedef struct elf64_shdr { + Elf64_Word sh_name; /* Section name, index in string tbl */ + Elf64_Word sh_type; /* Type of section */ + Elf64_Xword sh_flags; /* Miscellaneous section attributes */ + Elf64_Addr sh_addr; /* Section virtual addr at execution */ + Elf64_Off sh_offset; /* Section file offset */ + Elf64_Xword sh_size; /* Size of section in bytes */ + Elf64_Word sh_link; /* Index of another section */ + Elf64_Word sh_info; /* Additional section information */ + Elf64_Xword sh_addralign; /* Section alignment */ + Elf64_Xword sh_entsize; /* Entry size if section holds table */ +} Elf64_Shdr; + +#define EI_MAG0 0 /* e_ident[] indexes */ +#define EI_MAG1 1 +#define EI_MAG2 2 +#define EI_MAG3 3 +#define EI_CLASS 4 +#define EI_DATA 5 +#define EI_VERSION 6 +#define EI_OSABI 7 +#define EI_PAD 8 + +#define ELFMAG0 0x7f /* EI_MAG */ +#define ELFMAG1 'E' +#define ELFMAG2 'L' +#define ELFMAG3 'F' +#define ELFMAG "\177ELF" +#define SELFMAG 4 + +#define ELFCLASSNONE 0 /* EI_CLASS */ +#define ELFCLASS32 1 +#define ELFCLASS64 2 +#define ELFCLASSNUM 3 + +#define ELFDATANONE 0 /* e_ident[EI_DATA] */ +#define ELFDATA2LSB 1 +#define ELFDATA2MSB 2 + +#define EV_NONE 0 /* e_version, EI_VERSION */ +#define EV_CURRENT 1 +#define EV_NUM 2 + +#define ELFOSABI_NONE 0 +#define ELFOSABI_LINUX 3 + +#ifndef ELF_OSABI +#define ELF_OSABI ELFOSABI_NONE +#endif + +/* + * Notes used in ET_CORE. Architectures export some of the arch register sets + * using the corresponding note types via the PTRACE_GETREGSET and + * PTRACE_SETREGSET requests. + */ +#define NT_PRSTATUS 1 +#define NT_PRFPREG 2 +#define NT_PRPSINFO 3 +#define NT_TASKSTRUCT 4 +#define NT_AUXV 6 +/* + * Note to userspace developers: size of NT_SIGINFO note may increase + * in the future to accomodate more fields, don't assume it is fixed! + */ +#define NT_SIGINFO 0x53494749 +#define NT_FILE 0x46494c45 +#define NT_PRXFPREG 0x46e62b7f /* copied from gdb5.1/include/elf/common.h */ +#define NT_PPC_VMX 0x100 /* PowerPC Altivec/VMX registers */ +#define NT_PPC_SPE 0x101 /* PowerPC SPE/EVR registers */ +#define NT_PPC_VSX 0x102 /* PowerPC VSX registers */ +#define NT_386_TLS 0x200 /* i386 TLS slots (struct user_desc) */ +#define NT_386_IOPERM 0x201 /* x86 io permission bitmap (1=deny) */ +#define NT_X86_XSTATE 0x202 /* x86 extended state using xsave */ +#define NT_S390_HIGH_GPRS 0x300 /* s390 upper register halves */ +#define NT_S390_TIMER 0x301 /* s390 timer register */ +#define NT_S390_TODCMP 0x302 /* s390 TOD clock comparator register */ +#define NT_S390_TODPREG 0x303 /* s390 TOD programmable register */ +#define NT_S390_CTRS 0x304 /* s390 control registers */ +#define NT_S390_PREFIX 0x305 /* s390 prefix register */ +#define NT_S390_LAST_BREAK 0x306 /* s390 breaking event address */ +#define NT_S390_SYSTEM_CALL 0x307 /* s390 system call restart data */ +#define NT_S390_TDB 0x308 /* s390 transaction diagnostic block */ +#define NT_ARM_VFP 0x400 /* ARM VFP/NEON registers */ +#define NT_ARM_TLS 0x401 /* ARM TLS register */ +#define NT_ARM_HW_BREAK 0x402 /* ARM hardware breakpoint registers */ +#define NT_ARM_HW_WATCH 0x403 /* ARM hardware watchpoint registers */ + + +/* Note header in a PT_NOTE section */ +typedef struct elf32_note { + Elf32_Word n_namesz; /* Name size */ + Elf32_Word n_descsz; /* Content size */ + Elf32_Word n_type; /* Content type */ +} Elf32_Nhdr; + +/* Note header in a PT_NOTE section */ +typedef struct elf64_note { + Elf64_Word n_namesz; /* Name size */ + Elf64_Word n_descsz; /* Content size */ + Elf64_Word n_type; /* Content type */ +} Elf64_Nhdr; + +#endif /* _UAPI_LINUX_ELF_H */ diff --git a/include/uapi/linux/elfcore.h b/include/uapi/linux/elfcore.h new file mode 100644 index 00000000000..569737cfb55 --- /dev/null +++ b/include/uapi/linux/elfcore.h @@ -0,0 +1,100 @@ +#ifndef _UAPI_LINUX_ELFCORE_H +#define _UAPI_LINUX_ELFCORE_H + +#include <linux/types.h> +#include <linux/signal.h> +#include <linux/time.h> +#include <linux/ptrace.h> +#include <linux/elf.h> +#include <linux/fs.h> + +struct elf_siginfo +{ + int si_signo; /* signal number */ + int si_code; /* extra code */ + int si_errno; /* errno */ +}; + + +#ifndef __KERNEL__ +typedef elf_greg_t greg_t; +typedef elf_gregset_t gregset_t; +typedef elf_fpregset_t fpregset_t; +typedef elf_fpxregset_t fpxregset_t; +#define NGREG ELF_NGREG +#endif + +/* + * Definitions to generate Intel SVR4-like core files. + * These mostly have the same names as the SVR4 types with "elf_" + * tacked on the front to prevent clashes with linux definitions, + * and the typedef forms have been avoided. This is mostly like + * the SVR4 structure, but more Linuxy, with things that Linux does + * not support and which gdb doesn't really use excluded. + * Fields present but not used are marked with "XXX". + */ +struct elf_prstatus +{ +#if 0 + long pr_flags; /* XXX Process flags */ + short pr_why; /* XXX Reason for process halt */ + short pr_what; /* XXX More detailed reason */ +#endif + struct elf_siginfo pr_info; /* Info associated with signal */ + short pr_cursig; /* Current signal */ + unsigned long pr_sigpend; /* Set of pending signals */ + unsigned long pr_sighold; /* Set of held signals */ +#if 0 + struct sigaltstack pr_altstack; /* Alternate stack info */ + struct sigaction pr_action; /* Signal action for current sig */ +#endif + pid_t pr_pid; + pid_t pr_ppid; + pid_t pr_pgrp; + pid_t pr_sid; + struct timeval pr_utime; /* User time */ + struct timeval pr_stime; /* System time */ + struct timeval pr_cutime; /* Cumulative user time */ + struct timeval pr_cstime; /* Cumulative system time */ +#if 0 + long pr_instr; /* Current instruction */ +#endif + elf_gregset_t pr_reg; /* GP registers */ +#ifdef CONFIG_BINFMT_ELF_FDPIC + /* When using FDPIC, the loadmap addresses need to be communicated + * to GDB in order for GDB to do the necessary relocations. The + * fields (below) used to communicate this information are placed + * immediately after ``pr_reg'', so that the loadmap addresses may + * be viewed as part of the register set if so desired. + */ + unsigned long pr_exec_fdpic_loadmap; + unsigned long pr_interp_fdpic_loadmap; +#endif + int pr_fpvalid; /* True if math co-processor being used. */ +}; + +#define ELF_PRARGSZ (80) /* Number of chars for args */ + +struct elf_prpsinfo +{ + char pr_state; /* numeric process state */ + char pr_sname; /* char for pr_state */ + char pr_zomb; /* zombie */ + char pr_nice; /* nice val */ + unsigned long pr_flag; /* flags */ + __kernel_uid_t pr_uid; + __kernel_gid_t pr_gid; + pid_t pr_pid, pr_ppid, pr_pgrp, pr_sid; + /* Lots missing */ + char pr_fname[16]; /* filename of executable */ + char pr_psargs[ELF_PRARGSZ]; /* initial part of arg list */ +}; + +#ifndef __KERNEL__ +typedef struct elf_prstatus prstatus_t; +typedef struct elf_prpsinfo prpsinfo_t; +#define PRARGSZ ELF_PRARGSZ +#endif + + +#endif /* _UAPI_LINUX_ELFCORE_H */ diff --git a/include/uapi/linux/errno.h b/include/uapi/linux/errno.h new file mode 100644 index 00000000000..70f2bd34e33 --- /dev/null +++ b/include/uapi/linux/errno.h @@ -0,0 +1 @@ +#include <asm/errno.h> diff --git a/include/uapi/linux/errqueue.h b/include/uapi/linux/errqueue.h new file mode 100644 index 00000000000..aacd4fb7102 --- /dev/null +++ b/include/uapi/linux/errqueue.h @@ -0,0 +1,26 @@ +#ifndef _UAPI_LINUX_ERRQUEUE_H +#define _UAPI_LINUX_ERRQUEUE_H + +#include <linux/types.h> + +struct sock_extended_err { + __u32 ee_errno; + __u8 ee_origin; + __u8 ee_type; + __u8 ee_code; + __u8 ee_pad; + __u32 ee_info; + __u32 ee_data; +}; + +#define SO_EE_ORIGIN_NONE 0 +#define SO_EE_ORIGIN_LOCAL 1 +#define SO_EE_ORIGIN_ICMP 2 +#define SO_EE_ORIGIN_ICMP6 3 +#define SO_EE_ORIGIN_TXSTATUS 4 +#define SO_EE_ORIGIN_TIMESTAMPING SO_EE_ORIGIN_TXSTATUS + +#define SO_EE_OFFENDER(ee) ((struct sockaddr*)((ee)+1)) + + +#endif /* _UAPI_LINUX_ERRQUEUE_H */ diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h new file mode 100644 index 00000000000..d3eaaaf1009 --- /dev/null +++ b/include/uapi/linux/ethtool.h @@ -0,0 +1,1085 @@ +/* + * ethtool.h: Defines for Linux ethtool. + * + * Copyright (C) 1998 David S. Miller (davem@redhat.com) + * Copyright 2001 Jeff Garzik <jgarzik@pobox.com> + * Portions Copyright 2001 Sun Microsystems (thockin@sun.com) + * Portions Copyright 2002 Intel (eli.kupermann@intel.com, + * christopher.leech@intel.com, + * scott.feldman@intel.com) + * Portions Copyright (C) Sun Microsystems 2008 + */ + +#ifndef _UAPI_LINUX_ETHTOOL_H +#define _UAPI_LINUX_ETHTOOL_H + +#include <linux/types.h> +#include <linux/if_ether.h> + +/* This should work for both 32 and 64 bit userland. */ +struct ethtool_cmd { + __u32 cmd; + __u32 supported; /* Features this interface supports */ + __u32 advertising; /* Features this interface advertises */ + __u16 speed; /* The forced speed (lower bits) in + * Mbps. Please use + * ethtool_cmd_speed()/_set() to + * access it */ + __u8 duplex; /* Duplex, half or full */ + __u8 port; /* Which connector port */ + __u8 phy_address; /* MDIO PHY address (PRTAD for clause 45). + * May be read-only or read-write + * depending on the driver. + */ + __u8 transceiver; /* Which transceiver to use */ + __u8 autoneg; /* Enable or disable autonegotiation */ + __u8 mdio_support; /* MDIO protocols supported. Read-only. + * Not set by all drivers. + */ + __u32 maxtxpkt; /* Tx pkts before generating tx int */ + __u32 maxrxpkt; /* Rx pkts before generating rx int */ + __u16 speed_hi; /* The forced speed (upper + * bits) in Mbps. Please use + * ethtool_cmd_speed()/_set() to + * access it */ + __u8 eth_tp_mdix; /* twisted pair MDI-X status */ + __u8 eth_tp_mdix_ctrl; /* twisted pair MDI-X control, when set, + * link should be renegotiated if necessary + */ + __u32 lp_advertising; /* Features the link partner advertises */ + __u32 reserved[2]; +}; + +static inline void ethtool_cmd_speed_set(struct ethtool_cmd *ep, + __u32 speed) +{ + + ep->speed = (__u16)speed; + ep->speed_hi = (__u16)(speed >> 16); +} + +static inline __u32 ethtool_cmd_speed(const struct ethtool_cmd *ep) +{ + return (ep->speed_hi << 16) | ep->speed; +} + +/* Device supports clause 22 register access to PHY or peripherals + * using the interface defined in <linux/mii.h>. This should not be + * set if there are known to be no such peripherals present or if + * the driver only emulates clause 22 registers for compatibility. + */ +#define ETH_MDIO_SUPPORTS_C22 1 + +/* Device supports clause 45 register access to PHY or peripherals + * using the interface defined in <linux/mii.h> and <linux/mdio.h>. + * This should not be set if there are known to be no such peripherals + * present. + */ +#define ETH_MDIO_SUPPORTS_C45 2 + +#define ETHTOOL_FWVERS_LEN 32 +#define ETHTOOL_BUSINFO_LEN 32 +/* these strings are set to whatever the driver author decides... */ +struct ethtool_drvinfo { + __u32 cmd; + char driver[32]; /* driver short name, "tulip", "eepro100" */ + char version[32]; /* driver version string */ + char fw_version[ETHTOOL_FWVERS_LEN]; /* firmware version string */ + char bus_info[ETHTOOL_BUSINFO_LEN]; /* Bus info for this IF. */ + /* For PCI devices, use pci_name(pci_dev). */ + char reserved1[32]; + char reserved2[12]; + /* + * Some struct members below are filled in + * using ops->get_sset_count(). Obtaining + * this info from ethtool_drvinfo is now + * deprecated; Use ETHTOOL_GSSET_INFO + * instead. + */ + __u32 n_priv_flags; /* number of flags valid in ETHTOOL_GPFLAGS */ + __u32 n_stats; /* number of u64's from ETHTOOL_GSTATS */ + __u32 testinfo_len; + __u32 eedump_len; /* Size of data from ETHTOOL_GEEPROM (bytes) */ + __u32 regdump_len; /* Size of data from ETHTOOL_GREGS (bytes) */ +}; + +#define SOPASS_MAX 6 +/* wake-on-lan settings */ +struct ethtool_wolinfo { + __u32 cmd; + __u32 supported; + __u32 wolopts; + __u8 sopass[SOPASS_MAX]; /* SecureOn(tm) password */ +}; + +/* for passing single values */ +struct ethtool_value { + __u32 cmd; + __u32 data; +}; + +/* for passing big chunks of data */ +struct ethtool_regs { + __u32 cmd; + __u32 version; /* driver-specific, indicates different chips/revs */ + __u32 len; /* bytes */ + __u8 data[0]; +}; + +/* for passing EEPROM chunks */ +struct ethtool_eeprom { + __u32 cmd; + __u32 magic; + __u32 offset; /* in bytes */ + __u32 len; /* in bytes */ + __u8 data[0]; +}; + +/** + * struct ethtool_eee - Energy Efficient Ethernet information + * @cmd: ETHTOOL_{G,S}EEE + * @supported: Mask of %SUPPORTED_* flags for the speed/duplex combinations + * for which there is EEE support. + * @advertised: Mask of %ADVERTISED_* flags for the speed/duplex combinations + * advertised as eee capable. + * @lp_advertised: Mask of %ADVERTISED_* flags for the speed/duplex + * combinations advertised by the link partner as eee capable. + * @eee_active: Result of the eee auto negotiation. + * @eee_enabled: EEE configured mode (enabled/disabled). + * @tx_lpi_enabled: Whether the interface should assert its tx lpi, given + * that eee was negotiated. + * @tx_lpi_timer: Time in microseconds the interface delays prior to asserting + * its tx lpi (after reaching 'idle' state). Effective only when eee + * was negotiated and tx_lpi_enabled was set. + */ +struct ethtool_eee { + __u32 cmd; + __u32 supported; + __u32 advertised; + __u32 lp_advertised; + __u32 eee_active; + __u32 eee_enabled; + __u32 tx_lpi_enabled; + __u32 tx_lpi_timer; + __u32 reserved[2]; +}; + +/** + * struct ethtool_modinfo - plugin module eeprom information + * @cmd: %ETHTOOL_GMODULEINFO + * @type: Standard the module information conforms to %ETH_MODULE_SFF_xxxx + * @eeprom_len: Length of the eeprom + * + * This structure is used to return the information to + * properly size memory for a subsequent call to %ETHTOOL_GMODULEEEPROM. + * The type code indicates the eeprom data format + */ +struct ethtool_modinfo { + __u32 cmd; + __u32 type; + __u32 eeprom_len; + __u32 reserved[8]; +}; + +/** + * struct ethtool_coalesce - coalescing parameters for IRQs and stats updates + * @cmd: ETHTOOL_{G,S}COALESCE + * @rx_coalesce_usecs: How many usecs to delay an RX interrupt after + * a packet arrives. + * @rx_max_coalesced_frames: Maximum number of packets to receive + * before an RX interrupt. + * @rx_coalesce_usecs_irq: Same as @rx_coalesce_usecs, except that + * this value applies while an IRQ is being serviced by the host. + * @rx_max_coalesced_frames_irq: Same as @rx_max_coalesced_frames, + * except that this value applies while an IRQ is being serviced + * by the host. + * @tx_coalesce_usecs: How many usecs to delay a TX interrupt after + * a packet is sent. + * @tx_max_coalesced_frames: Maximum number of packets to be sent + * before a TX interrupt. + * @tx_coalesce_usecs_irq: Same as @tx_coalesce_usecs, except that + * this value applies while an IRQ is being serviced by the host. + * @tx_max_coalesced_frames_irq: Same as @tx_max_coalesced_frames, + * except that this value applies while an IRQ is being serviced + * by the host. + * @stats_block_coalesce_usecs: How many usecs to delay in-memory + * statistics block updates. Some drivers do not have an + * in-memory statistic block, and in such cases this value is + * ignored. This value must not be zero. + * @use_adaptive_rx_coalesce: Enable adaptive RX coalescing. + * @use_adaptive_tx_coalesce: Enable adaptive TX coalescing. + * @pkt_rate_low: Threshold for low packet rate (packets per second). + * @rx_coalesce_usecs_low: How many usecs to delay an RX interrupt after + * a packet arrives, when the packet rate is below @pkt_rate_low. + * @rx_max_coalesced_frames_low: Maximum number of packets to be received + * before an RX interrupt, when the packet rate is below @pkt_rate_low. + * @tx_coalesce_usecs_low: How many usecs to delay a TX interrupt after + * a packet is sent, when the packet rate is below @pkt_rate_low. + * @tx_max_coalesced_frames_low: Maximum nuumber of packets to be sent before + * a TX interrupt, when the packet rate is below @pkt_rate_low. + * @pkt_rate_high: Threshold for high packet rate (packets per second). + * @rx_coalesce_usecs_high: How many usecs to delay an RX interrupt after + * a packet arrives, when the packet rate is above @pkt_rate_high. + * @rx_max_coalesced_frames_high: Maximum number of packets to be received + * before an RX interrupt, when the packet rate is above @pkt_rate_high. + * @tx_coalesce_usecs_high: How many usecs to delay a TX interrupt after + * a packet is sent, when the packet rate is above @pkt_rate_high. + * @tx_max_coalesced_frames_high: Maximum number of packets to be sent before + * a TX interrupt, when the packet rate is above @pkt_rate_high. + * @rate_sample_interval: How often to do adaptive coalescing packet rate + * sampling, measured in seconds. Must not be zero. + * + * Each pair of (usecs, max_frames) fields specifies this exit + * condition for interrupt coalescing: + * (usecs > 0 && time_since_first_completion >= usecs) || + * (max_frames > 0 && completed_frames >= max_frames) + * It is illegal to set both usecs and max_frames to zero as this + * would cause interrupts to never be generated. To disable + * coalescing, set usecs = 0 and max_frames = 1. + * + * Some implementations ignore the value of max_frames and use the + * condition: + * time_since_first_completion >= usecs + * This is deprecated. Drivers for hardware that does not support + * counting completions should validate that max_frames == !rx_usecs. + * + * Adaptive RX/TX coalescing is an algorithm implemented by some + * drivers to improve latency under low packet rates and improve + * throughput under high packet rates. Some drivers only implement + * one of RX or TX adaptive coalescing. Anything not implemented by + * the driver causes these values to be silently ignored. + * + * When the packet rate is below @pkt_rate_high but above + * @pkt_rate_low (both measured in packets per second) the + * normal {rx,tx}_* coalescing parameters are used. + */ +struct ethtool_coalesce { + __u32 cmd; + __u32 rx_coalesce_usecs; + __u32 rx_max_coalesced_frames; + __u32 rx_coalesce_usecs_irq; + __u32 rx_max_coalesced_frames_irq; + __u32 tx_coalesce_usecs; + __u32 tx_max_coalesced_frames; + __u32 tx_coalesce_usecs_irq; + __u32 tx_max_coalesced_frames_irq; + __u32 stats_block_coalesce_usecs; + __u32 use_adaptive_rx_coalesce; + __u32 use_adaptive_tx_coalesce; + __u32 pkt_rate_low; + __u32 rx_coalesce_usecs_low; + __u32 rx_max_coalesced_frames_low; + __u32 tx_coalesce_usecs_low; + __u32 tx_max_coalesced_frames_low; + __u32 pkt_rate_high; + __u32 rx_coalesce_usecs_high; + __u32 rx_max_coalesced_frames_high; + __u32 tx_coalesce_usecs_high; + __u32 tx_max_coalesced_frames_high; + __u32 rate_sample_interval; +}; + +/* for configuring RX/TX ring parameters */ +struct ethtool_ringparam { + __u32 cmd; /* ETHTOOL_{G,S}RINGPARAM */ + + /* Read only attributes. These indicate the maximum number + * of pending RX/TX ring entries the driver will allow the + * user to set. + */ + __u32 rx_max_pending; + __u32 rx_mini_max_pending; + __u32 rx_jumbo_max_pending; + __u32 tx_max_pending; + + /* Values changeable by the user. The valid values are + * in the range 1 to the "*_max_pending" counterpart above. + */ + __u32 rx_pending; + __u32 rx_mini_pending; + __u32 rx_jumbo_pending; + __u32 tx_pending; +}; + +/** + * struct ethtool_channels - configuring number of network channel + * @cmd: ETHTOOL_{G,S}CHANNELS + * @max_rx: Read only. Maximum number of receive channel the driver support. + * @max_tx: Read only. Maximum number of transmit channel the driver support. + * @max_other: Read only. Maximum number of other channel the driver support. + * @max_combined: Read only. Maximum number of combined channel the driver + * support. Set of queues RX, TX or other. + * @rx_count: Valid values are in the range 1 to the max_rx. + * @tx_count: Valid values are in the range 1 to the max_tx. + * @other_count: Valid values are in the range 1 to the max_other. + * @combined_count: Valid values are in the range 1 to the max_combined. + * + * This can be used to configure RX, TX and other channels. + */ + +struct ethtool_channels { + __u32 cmd; + __u32 max_rx; + __u32 max_tx; + __u32 max_other; + __u32 max_combined; + __u32 rx_count; + __u32 tx_count; + __u32 other_count; + __u32 combined_count; +}; + +/* for configuring link flow control parameters */ +struct ethtool_pauseparam { + __u32 cmd; /* ETHTOOL_{G,S}PAUSEPARAM */ + + /* If the link is being auto-negotiated (via ethtool_cmd.autoneg + * being true) the user may set 'autoneg' here non-zero to have the + * pause parameters be auto-negotiated too. In such a case, the + * {rx,tx}_pause values below determine what capabilities are + * advertised. + * + * If 'autoneg' is zero or the link is not being auto-negotiated, + * then {rx,tx}_pause force the driver to use/not-use pause + * flow control. + */ + __u32 autoneg; + __u32 rx_pause; + __u32 tx_pause; +}; + +#define ETH_GSTRING_LEN 32 +enum ethtool_stringset { + ETH_SS_TEST = 0, + ETH_SS_STATS, + ETH_SS_PRIV_FLAGS, + ETH_SS_NTUPLE_FILTERS, /* Do not use, GRXNTUPLE is now deprecated */ + ETH_SS_FEATURES, +}; + +/* for passing string sets for data tagging */ +struct ethtool_gstrings { + __u32 cmd; /* ETHTOOL_GSTRINGS */ + __u32 string_set; /* string set id e.c. ETH_SS_TEST, etc*/ + __u32 len; /* number of strings in the string set */ + __u8 data[0]; +}; + +struct ethtool_sset_info { + __u32 cmd; /* ETHTOOL_GSSET_INFO */ + __u32 reserved; + __u64 sset_mask; /* input: each bit selects an sset to query */ + /* output: each bit a returned sset */ + __u32 data[0]; /* ETH_SS_xxx count, in order, based on bits + in sset_mask. One bit implies one + __u32, two bits implies two + __u32's, etc. */ +}; + +/** + * enum ethtool_test_flags - flags definition of ethtool_test + * @ETH_TEST_FL_OFFLINE: if set perform online and offline tests, otherwise + * only online tests. + * @ETH_TEST_FL_FAILED: Driver set this flag if test fails. + * @ETH_TEST_FL_EXTERNAL_LB: Application request to perform external loopback + * test. + * @ETH_TEST_FL_EXTERNAL_LB_DONE: Driver performed the external loopback test + */ + +enum ethtool_test_flags { + ETH_TEST_FL_OFFLINE = (1 << 0), + ETH_TEST_FL_FAILED = (1 << 1), + ETH_TEST_FL_EXTERNAL_LB = (1 << 2), + ETH_TEST_FL_EXTERNAL_LB_DONE = (1 << 3), +}; + +/* for requesting NIC test and getting results*/ +struct ethtool_test { + __u32 cmd; /* ETHTOOL_TEST */ + __u32 flags; /* ETH_TEST_FL_xxx */ + __u32 reserved; + __u32 len; /* result length, in number of u64 elements */ + __u64 data[0]; +}; + +/* for dumping NIC-specific statistics */ +struct ethtool_stats { + __u32 cmd; /* ETHTOOL_GSTATS */ + __u32 n_stats; /* number of u64's being returned */ + __u64 data[0]; +}; + +struct ethtool_perm_addr { + __u32 cmd; /* ETHTOOL_GPERMADDR */ + __u32 size; + __u8 data[0]; +}; + +/* boolean flags controlling per-interface behavior characteristics. + * When reading, the flag indicates whether or not a certain behavior + * is enabled/present. When writing, the flag indicates whether + * or not the driver should turn on (set) or off (clear) a behavior. + * + * Some behaviors may read-only (unconditionally absent or present). + * If such is the case, return EINVAL in the set-flags operation if the + * flag differs from the read-only value. + */ +enum ethtool_flags { + ETH_FLAG_TXVLAN = (1 << 7), /* TX VLAN offload enabled */ + ETH_FLAG_RXVLAN = (1 << 8), /* RX VLAN offload enabled */ + ETH_FLAG_LRO = (1 << 15), /* LRO is enabled */ + ETH_FLAG_NTUPLE = (1 << 27), /* N-tuple filters enabled */ + ETH_FLAG_RXHASH = (1 << 28), +}; + +/* The following structures are for supporting RX network flow + * classification and RX n-tuple configuration. Note, all multibyte + * fields, e.g., ip4src, ip4dst, psrc, pdst, spi, etc. are expected to + * be in network byte order. + */ + +/** + * struct ethtool_tcpip4_spec - flow specification for TCP/IPv4 etc. + * @ip4src: Source host + * @ip4dst: Destination host + * @psrc: Source port + * @pdst: Destination port + * @tos: Type-of-service + * + * This can be used to specify a TCP/IPv4, UDP/IPv4 or SCTP/IPv4 flow. + */ +struct ethtool_tcpip4_spec { + __be32 ip4src; + __be32 ip4dst; + __be16 psrc; + __be16 pdst; + __u8 tos; +}; + +/** + * struct ethtool_ah_espip4_spec - flow specification for IPsec/IPv4 + * @ip4src: Source host + * @ip4dst: Destination host + * @spi: Security parameters index + * @tos: Type-of-service + * + * This can be used to specify an IPsec transport or tunnel over IPv4. + */ +struct ethtool_ah_espip4_spec { + __be32 ip4src; + __be32 ip4dst; + __be32 spi; + __u8 tos; +}; + +#define ETH_RX_NFC_IP4 1 + +/** + * struct ethtool_usrip4_spec - general flow specification for IPv4 + * @ip4src: Source host + * @ip4dst: Destination host + * @l4_4_bytes: First 4 bytes of transport (layer 4) header + * @tos: Type-of-service + * @ip_ver: Value must be %ETH_RX_NFC_IP4; mask must be 0 + * @proto: Transport protocol number; mask must be 0 + */ +struct ethtool_usrip4_spec { + __be32 ip4src; + __be32 ip4dst; + __be32 l4_4_bytes; + __u8 tos; + __u8 ip_ver; + __u8 proto; +}; + +union ethtool_flow_union { + struct ethtool_tcpip4_spec tcp_ip4_spec; + struct ethtool_tcpip4_spec udp_ip4_spec; + struct ethtool_tcpip4_spec sctp_ip4_spec; + struct ethtool_ah_espip4_spec ah_ip4_spec; + struct ethtool_ah_espip4_spec esp_ip4_spec; + struct ethtool_usrip4_spec usr_ip4_spec; + struct ethhdr ether_spec; + __u8 hdata[60]; +}; + +struct ethtool_flow_ext { + __be16 vlan_etype; + __be16 vlan_tci; + __be32 data[2]; +}; + +/** + * struct ethtool_rx_flow_spec - classification rule for RX flows + * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW + * @h_u: Flow fields to match (dependent on @flow_type) + * @h_ext: Additional fields to match + * @m_u: Masks for flow field bits to be matched + * @m_ext: Masks for additional field bits to be matched + * Note, all additional fields must be ignored unless @flow_type + * includes the %FLOW_EXT flag. + * @ring_cookie: RX ring/queue index to deliver to, or %RX_CLS_FLOW_DISC + * if packets should be discarded + * @location: Location of rule in the table. Locations must be + * numbered such that a flow matching multiple rules will be + * classified according to the first (lowest numbered) rule. + */ +struct ethtool_rx_flow_spec { + __u32 flow_type; + union ethtool_flow_union h_u; + struct ethtool_flow_ext h_ext; + union ethtool_flow_union m_u; + struct ethtool_flow_ext m_ext; + __u64 ring_cookie; + __u32 location; +}; + +/** + * struct ethtool_rxnfc - command to get or set RX flow classification rules + * @cmd: Specific command number - %ETHTOOL_GRXFH, %ETHTOOL_SRXFH, + * %ETHTOOL_GRXRINGS, %ETHTOOL_GRXCLSRLCNT, %ETHTOOL_GRXCLSRULE, + * %ETHTOOL_GRXCLSRLALL, %ETHTOOL_SRXCLSRLDEL or %ETHTOOL_SRXCLSRLINS + * @flow_type: Type of flow to be affected, e.g. %TCP_V4_FLOW + * @data: Command-dependent value + * @fs: Flow classification rule + * @rule_cnt: Number of rules to be affected + * @rule_locs: Array of used rule locations + * + * For %ETHTOOL_GRXFH and %ETHTOOL_SRXFH, @data is a bitmask indicating + * the fields included in the flow hash, e.g. %RXH_IP_SRC. The following + * structure fields must not be used. + * + * For %ETHTOOL_GRXRINGS, @data is set to the number of RX rings/queues + * on return. + * + * For %ETHTOOL_GRXCLSRLCNT, @rule_cnt is set to the number of defined + * rules on return. If @data is non-zero on return then it is the + * size of the rule table, plus the flag %RX_CLS_LOC_SPECIAL if the + * driver supports any special location values. If that flag is not + * set in @data then special location values should not be used. + * + * For %ETHTOOL_GRXCLSRULE, @fs.@location specifies the location of an + * existing rule on entry and @fs contains the rule on return. + * + * For %ETHTOOL_GRXCLSRLALL, @rule_cnt specifies the array size of the + * user buffer for @rule_locs on entry. On return, @data is the size + * of the rule table, @rule_cnt is the number of defined rules, and + * @rule_locs contains the locations of the defined rules. Drivers + * must use the second parameter to get_rxnfc() instead of @rule_locs. + * + * For %ETHTOOL_SRXCLSRLINS, @fs specifies the rule to add or update. + * @fs.@location either specifies the location to use or is a special + * location value with %RX_CLS_LOC_SPECIAL flag set. On return, + * @fs.@location is the actual rule location. + * + * For %ETHTOOL_SRXCLSRLDEL, @fs.@location specifies the location of an + * existing rule on entry. + * + * A driver supporting the special location values for + * %ETHTOOL_SRXCLSRLINS may add the rule at any suitable unused + * location, and may remove a rule at a later location (lower + * priority) that matches exactly the same set of flows. The special + * values are: %RX_CLS_LOC_ANY, selecting any location; + * %RX_CLS_LOC_FIRST, selecting the first suitable location (maximum + * priority); and %RX_CLS_LOC_LAST, selecting the last suitable + * location (minimum priority). Additional special values may be + * defined in future and drivers must return -%EINVAL for any + * unrecognised value. + */ +struct ethtool_rxnfc { + __u32 cmd; + __u32 flow_type; + __u64 data; + struct ethtool_rx_flow_spec fs; + __u32 rule_cnt; + __u32 rule_locs[0]; +}; + + +/** + * struct ethtool_rxfh_indir - command to get or set RX flow hash indirection + * @cmd: Specific command number - %ETHTOOL_GRXFHINDIR or %ETHTOOL_SRXFHINDIR + * @size: On entry, the array size of the user buffer, which may be zero. + * On return from %ETHTOOL_GRXFHINDIR, the array size of the hardware + * indirection table. + * @ring_index: RX ring/queue index for each hash value + * + * For %ETHTOOL_GRXFHINDIR, a @size of zero means that only the size + * should be returned. For %ETHTOOL_SRXFHINDIR, a @size of zero means + * the table should be reset to default values. This last feature + * is not supported by the original implementations. + */ +struct ethtool_rxfh_indir { + __u32 cmd; + __u32 size; + __u32 ring_index[0]; +}; + +/** + * struct ethtool_rx_ntuple_flow_spec - specification for RX flow filter + * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW + * @h_u: Flow field values to match (dependent on @flow_type) + * @m_u: Masks for flow field value bits to be ignored + * @vlan_tag: VLAN tag to match + * @vlan_tag_mask: Mask for VLAN tag bits to be ignored + * @data: Driver-dependent data to match + * @data_mask: Mask for driver-dependent data bits to be ignored + * @action: RX ring/queue index to deliver to (non-negative) or other action + * (negative, e.g. %ETHTOOL_RXNTUPLE_ACTION_DROP) + * + * For flow types %TCP_V4_FLOW, %UDP_V4_FLOW and %SCTP_V4_FLOW, where + * a field value and mask are both zero this is treated as if all mask + * bits are set i.e. the field is ignored. + */ +struct ethtool_rx_ntuple_flow_spec { + __u32 flow_type; + union { + struct ethtool_tcpip4_spec tcp_ip4_spec; + struct ethtool_tcpip4_spec udp_ip4_spec; + struct ethtool_tcpip4_spec sctp_ip4_spec; + struct ethtool_ah_espip4_spec ah_ip4_spec; + struct ethtool_ah_espip4_spec esp_ip4_spec; + struct ethtool_usrip4_spec usr_ip4_spec; + struct ethhdr ether_spec; + __u8 hdata[72]; + } h_u, m_u; + + __u16 vlan_tag; + __u16 vlan_tag_mask; + __u64 data; + __u64 data_mask; + + __s32 action; +#define ETHTOOL_RXNTUPLE_ACTION_DROP (-1) /* drop packet */ +#define ETHTOOL_RXNTUPLE_ACTION_CLEAR (-2) /* clear filter */ +}; + +/** + * struct ethtool_rx_ntuple - command to set or clear RX flow filter + * @cmd: Command number - %ETHTOOL_SRXNTUPLE + * @fs: Flow filter specification + */ +struct ethtool_rx_ntuple { + __u32 cmd; + struct ethtool_rx_ntuple_flow_spec fs; +}; + +#define ETHTOOL_FLASH_MAX_FILENAME 128 +enum ethtool_flash_op_type { + ETHTOOL_FLASH_ALL_REGIONS = 0, +}; + +/* for passing firmware flashing related parameters */ +struct ethtool_flash { + __u32 cmd; + __u32 region; + char data[ETHTOOL_FLASH_MAX_FILENAME]; +}; + +/** + * struct ethtool_dump - used for retrieving, setting device dump + * @cmd: Command number - %ETHTOOL_GET_DUMP_FLAG, %ETHTOOL_GET_DUMP_DATA, or + * %ETHTOOL_SET_DUMP + * @version: FW version of the dump, filled in by driver + * @flag: driver dependent flag for dump setting, filled in by driver during + * get and filled in by ethtool for set operation. + * flag must be initialized by macro ETH_FW_DUMP_DISABLE value when + * firmware dump is disabled. + * @len: length of dump data, used as the length of the user buffer on entry to + * %ETHTOOL_GET_DUMP_DATA and this is returned as dump length by driver + * for %ETHTOOL_GET_DUMP_FLAG command + * @data: data collected for get dump data operation + */ + +#define ETH_FW_DUMP_DISABLE 0 + +struct ethtool_dump { + __u32 cmd; + __u32 version; + __u32 flag; + __u32 len; + __u8 data[0]; +}; + +/* for returning and changing feature sets */ + +/** + * struct ethtool_get_features_block - block with state of 32 features + * @available: mask of changeable features + * @requested: mask of features requested to be enabled if possible + * @active: mask of currently enabled features + * @never_changed: mask of features not changeable for any device + */ +struct ethtool_get_features_block { + __u32 available; + __u32 requested; + __u32 active; + __u32 never_changed; +}; + +/** + * struct ethtool_gfeatures - command to get state of device's features + * @cmd: command number = %ETHTOOL_GFEATURES + * @size: in: number of elements in the features[] array; + * out: number of elements in features[] needed to hold all features + * @features: state of features + */ +struct ethtool_gfeatures { + __u32 cmd; + __u32 size; + struct ethtool_get_features_block features[0]; +}; + +/** + * struct ethtool_set_features_block - block with request for 32 features + * @valid: mask of features to be changed + * @requested: values of features to be changed + */ +struct ethtool_set_features_block { + __u32 valid; + __u32 requested; +}; + +/** + * struct ethtool_sfeatures - command to request change in device's features + * @cmd: command number = %ETHTOOL_SFEATURES + * @size: array size of the features[] array + * @features: feature change masks + */ +struct ethtool_sfeatures { + __u32 cmd; + __u32 size; + struct ethtool_set_features_block features[0]; +}; + +/** + * struct ethtool_ts_info - holds a device's timestamping and PHC association + * @cmd: command number = %ETHTOOL_GET_TS_INFO + * @so_timestamping: bit mask of the sum of the supported SO_TIMESTAMPING flags + * @phc_index: device index of the associated PHC, or -1 if there is none + * @tx_types: bit mask of the supported hwtstamp_tx_types enumeration values + * @rx_filters: bit mask of the supported hwtstamp_rx_filters enumeration values + * + * The bits in the 'tx_types' and 'rx_filters' fields correspond to + * the 'hwtstamp_tx_types' and 'hwtstamp_rx_filters' enumeration values, + * respectively. For example, if the device supports HWTSTAMP_TX_ON, + * then (1 << HWTSTAMP_TX_ON) in 'tx_types' will be set. + */ +struct ethtool_ts_info { + __u32 cmd; + __u32 so_timestamping; + __s32 phc_index; + __u32 tx_types; + __u32 tx_reserved[3]; + __u32 rx_filters; + __u32 rx_reserved[3]; +}; + +/* + * %ETHTOOL_SFEATURES changes features present in features[].valid to the + * values of corresponding bits in features[].requested. Bits in .requested + * not set in .valid or not changeable are ignored. + * + * Returns %EINVAL when .valid contains undefined or never-changeable bits + * or size is not equal to required number of features words (32-bit blocks). + * Returns >= 0 if request was completed; bits set in the value mean: + * %ETHTOOL_F_UNSUPPORTED - there were bits set in .valid that are not + * changeable (not present in %ETHTOOL_GFEATURES' features[].available) + * those bits were ignored. + * %ETHTOOL_F_WISH - some or all changes requested were recorded but the + * resulting state of bits masked by .valid is not equal to .requested. + * Probably there are other device-specific constraints on some features + * in the set. When %ETHTOOL_F_UNSUPPORTED is set, .valid is considered + * here as though ignored bits were cleared. + * %ETHTOOL_F_COMPAT - some or all changes requested were made by calling + * compatibility functions. Requested offload state cannot be properly + * managed by kernel. + * + * Meaning of bits in the masks are obtained by %ETHTOOL_GSSET_INFO (number of + * bits in the arrays - always multiple of 32) and %ETHTOOL_GSTRINGS commands + * for ETH_SS_FEATURES string set. First entry in the table corresponds to least + * significant bit in features[0] fields. Empty strings mark undefined features. + */ +enum ethtool_sfeatures_retval_bits { + ETHTOOL_F_UNSUPPORTED__BIT, + ETHTOOL_F_WISH__BIT, + ETHTOOL_F_COMPAT__BIT, +}; + +#define ETHTOOL_F_UNSUPPORTED (1 << ETHTOOL_F_UNSUPPORTED__BIT) +#define ETHTOOL_F_WISH (1 << ETHTOOL_F_WISH__BIT) +#define ETHTOOL_F_COMPAT (1 << ETHTOOL_F_COMPAT__BIT) + + +/* CMDs currently supported */ +#define ETHTOOL_GSET 0x00000001 /* Get settings. */ +#define ETHTOOL_SSET 0x00000002 /* Set settings. */ +#define ETHTOOL_GDRVINFO 0x00000003 /* Get driver info. */ +#define ETHTOOL_GREGS 0x00000004 /* Get NIC registers. */ +#define ETHTOOL_GWOL 0x00000005 /* Get wake-on-lan options. */ +#define ETHTOOL_SWOL 0x00000006 /* Set wake-on-lan options. */ +#define ETHTOOL_GMSGLVL 0x00000007 /* Get driver message level */ +#define ETHTOOL_SMSGLVL 0x00000008 /* Set driver msg level. */ +#define ETHTOOL_NWAY_RST 0x00000009 /* Restart autonegotiation. */ +/* Get link status for host, i.e. whether the interface *and* the + * physical port (if there is one) are up (ethtool_value). */ +#define ETHTOOL_GLINK 0x0000000a +#define ETHTOOL_GEEPROM 0x0000000b /* Get EEPROM data */ +#define ETHTOOL_SEEPROM 0x0000000c /* Set EEPROM data. */ +#define ETHTOOL_GCOALESCE 0x0000000e /* Get coalesce config */ +#define ETHTOOL_SCOALESCE 0x0000000f /* Set coalesce config. */ +#define ETHTOOL_GRINGPARAM 0x00000010 /* Get ring parameters */ +#define ETHTOOL_SRINGPARAM 0x00000011 /* Set ring parameters. */ +#define ETHTOOL_GPAUSEPARAM 0x00000012 /* Get pause parameters */ +#define ETHTOOL_SPAUSEPARAM 0x00000013 /* Set pause parameters. */ +#define ETHTOOL_GRXCSUM 0x00000014 /* Get RX hw csum enable (ethtool_value) */ +#define ETHTOOL_SRXCSUM 0x00000015 /* Set RX hw csum enable (ethtool_value) */ +#define ETHTOOL_GTXCSUM 0x00000016 /* Get TX hw csum enable (ethtool_value) */ +#define ETHTOOL_STXCSUM 0x00000017 /* Set TX hw csum enable (ethtool_value) */ +#define ETHTOOL_GSG 0x00000018 /* Get scatter-gather enable + * (ethtool_value) */ +#define ETHTOOL_SSG 0x00000019 /* Set scatter-gather enable + * (ethtool_value). */ +#define ETHTOOL_TEST 0x0000001a /* execute NIC self-test. */ +#define ETHTOOL_GSTRINGS 0x0000001b /* get specified string set */ +#define ETHTOOL_PHYS_ID 0x0000001c /* identify the NIC */ +#define ETHTOOL_GSTATS 0x0000001d /* get NIC-specific statistics */ +#define ETHTOOL_GTSO 0x0000001e /* Get TSO enable (ethtool_value) */ +#define ETHTOOL_STSO 0x0000001f /* Set TSO enable (ethtool_value) */ +#define ETHTOOL_GPERMADDR 0x00000020 /* Get permanent hardware address */ +#define ETHTOOL_GUFO 0x00000021 /* Get UFO enable (ethtool_value) */ +#define ETHTOOL_SUFO 0x00000022 /* Set UFO enable (ethtool_value) */ +#define ETHTOOL_GGSO 0x00000023 /* Get GSO enable (ethtool_value) */ +#define ETHTOOL_SGSO 0x00000024 /* Set GSO enable (ethtool_value) */ +#define ETHTOOL_GFLAGS 0x00000025 /* Get flags bitmap(ethtool_value) */ +#define ETHTOOL_SFLAGS 0x00000026 /* Set flags bitmap(ethtool_value) */ +#define ETHTOOL_GPFLAGS 0x00000027 /* Get driver-private flags bitmap */ +#define ETHTOOL_SPFLAGS 0x00000028 /* Set driver-private flags bitmap */ + +#define ETHTOOL_GRXFH 0x00000029 /* Get RX flow hash configuration */ +#define ETHTOOL_SRXFH 0x0000002a /* Set RX flow hash configuration */ +#define ETHTOOL_GGRO 0x0000002b /* Get GRO enable (ethtool_value) */ +#define ETHTOOL_SGRO 0x0000002c /* Set GRO enable (ethtool_value) */ +#define ETHTOOL_GRXRINGS 0x0000002d /* Get RX rings available for LB */ +#define ETHTOOL_GRXCLSRLCNT 0x0000002e /* Get RX class rule count */ +#define ETHTOOL_GRXCLSRULE 0x0000002f /* Get RX classification rule */ +#define ETHTOOL_GRXCLSRLALL 0x00000030 /* Get all RX classification rule */ +#define ETHTOOL_SRXCLSRLDEL 0x00000031 /* Delete RX classification rule */ +#define ETHTOOL_SRXCLSRLINS 0x00000032 /* Insert RX classification rule */ +#define ETHTOOL_FLASHDEV 0x00000033 /* Flash firmware to device */ +#define ETHTOOL_RESET 0x00000034 /* Reset hardware */ +#define ETHTOOL_SRXNTUPLE 0x00000035 /* Add an n-tuple filter to device */ +#define ETHTOOL_GRXNTUPLE 0x00000036 /* deprecated */ +#define ETHTOOL_GSSET_INFO 0x00000037 /* Get string set info */ +#define ETHTOOL_GRXFHINDIR 0x00000038 /* Get RX flow hash indir'n table */ +#define ETHTOOL_SRXFHINDIR 0x00000039 /* Set RX flow hash indir'n table */ + +#define ETHTOOL_GFEATURES 0x0000003a /* Get device offload settings */ +#define ETHTOOL_SFEATURES 0x0000003b /* Change device offload settings */ +#define ETHTOOL_GCHANNELS 0x0000003c /* Get no of channels */ +#define ETHTOOL_SCHANNELS 0x0000003d /* Set no of channels */ +#define ETHTOOL_SET_DUMP 0x0000003e /* Set dump settings */ +#define ETHTOOL_GET_DUMP_FLAG 0x0000003f /* Get dump settings */ +#define ETHTOOL_GET_DUMP_DATA 0x00000040 /* Get dump data */ +#define ETHTOOL_GET_TS_INFO 0x00000041 /* Get time stamping and PHC info */ +#define ETHTOOL_GMODULEINFO 0x00000042 /* Get plug-in module information */ +#define ETHTOOL_GMODULEEEPROM 0x00000043 /* Get plug-in module eeprom */ +#define ETHTOOL_GEEE 0x00000044 /* Get EEE settings */ +#define ETHTOOL_SEEE 0x00000045 /* Set EEE settings */ + +/* compatibility with older code */ +#define SPARC_ETH_GSET ETHTOOL_GSET +#define SPARC_ETH_SSET ETHTOOL_SSET + +/* Indicates what features are supported by the interface. */ +#define SUPPORTED_10baseT_Half (1 << 0) +#define SUPPORTED_10baseT_Full (1 << 1) +#define SUPPORTED_100baseT_Half (1 << 2) +#define SUPPORTED_100baseT_Full (1 << 3) +#define SUPPORTED_1000baseT_Half (1 << 4) +#define SUPPORTED_1000baseT_Full (1 << 5) +#define SUPPORTED_Autoneg (1 << 6) +#define SUPPORTED_TP (1 << 7) +#define SUPPORTED_AUI (1 << 8) +#define SUPPORTED_MII (1 << 9) +#define SUPPORTED_FIBRE (1 << 10) +#define SUPPORTED_BNC (1 << 11) +#define SUPPORTED_10000baseT_Full (1 << 12) +#define SUPPORTED_Pause (1 << 13) +#define SUPPORTED_Asym_Pause (1 << 14) +#define SUPPORTED_2500baseX_Full (1 << 15) +#define SUPPORTED_Backplane (1 << 16) +#define SUPPORTED_1000baseKX_Full (1 << 17) +#define SUPPORTED_10000baseKX4_Full (1 << 18) +#define SUPPORTED_10000baseKR_Full (1 << 19) +#define SUPPORTED_10000baseR_FEC (1 << 20) +#define SUPPORTED_20000baseMLD2_Full (1 << 21) +#define SUPPORTED_20000baseKR2_Full (1 << 22) +#define SUPPORTED_40000baseKR4_Full (1 << 23) +#define SUPPORTED_40000baseCR4_Full (1 << 24) +#define SUPPORTED_40000baseSR4_Full (1 << 25) +#define SUPPORTED_40000baseLR4_Full (1 << 26) + +/* Indicates what features are advertised by the interface. */ +#define ADVERTISED_10baseT_Half (1 << 0) +#define ADVERTISED_10baseT_Full (1 << 1) +#define ADVERTISED_100baseT_Half (1 << 2) +#define ADVERTISED_100baseT_Full (1 << 3) +#define ADVERTISED_1000baseT_Half (1 << 4) +#define ADVERTISED_1000baseT_Full (1 << 5) +#define ADVERTISED_Autoneg (1 << 6) +#define ADVERTISED_TP (1 << 7) +#define ADVERTISED_AUI (1 << 8) +#define ADVERTISED_MII (1 << 9) +#define ADVERTISED_FIBRE (1 << 10) +#define ADVERTISED_BNC (1 << 11) +#define ADVERTISED_10000baseT_Full (1 << 12) +#define ADVERTISED_Pause (1 << 13) +#define ADVERTISED_Asym_Pause (1 << 14) +#define ADVERTISED_2500baseX_Full (1 << 15) +#define ADVERTISED_Backplane (1 << 16) +#define ADVERTISED_1000baseKX_Full (1 << 17) +#define ADVERTISED_10000baseKX4_Full (1 << 18) +#define ADVERTISED_10000baseKR_Full (1 << 19) +#define ADVERTISED_10000baseR_FEC (1 << 20) +#define ADVERTISED_20000baseMLD2_Full (1 << 21) +#define ADVERTISED_20000baseKR2_Full (1 << 22) +#define ADVERTISED_40000baseKR4_Full (1 << 23) +#define ADVERTISED_40000baseCR4_Full (1 << 24) +#define ADVERTISED_40000baseSR4_Full (1 << 25) +#define ADVERTISED_40000baseLR4_Full (1 << 26) + +/* The following are all involved in forcing a particular link + * mode for the device for setting things. When getting the + * devices settings, these indicate the current mode and whether + * it was forced up into this mode or autonegotiated. + */ + +/* The forced speed, 10Mb, 100Mb, gigabit, 2.5Gb, 10GbE. */ +#define SPEED_10 10 +#define SPEED_100 100 +#define SPEED_1000 1000 +#define SPEED_2500 2500 +#define SPEED_10000 10000 +#define SPEED_UNKNOWN -1 + +/* Duplex, half or full. */ +#define DUPLEX_HALF 0x00 +#define DUPLEX_FULL 0x01 +#define DUPLEX_UNKNOWN 0xff + +/* Which connector port. */ +#define PORT_TP 0x00 +#define PORT_AUI 0x01 +#define PORT_MII 0x02 +#define PORT_FIBRE 0x03 +#define PORT_BNC 0x04 +#define PORT_DA 0x05 +#define PORT_NONE 0xef +#define PORT_OTHER 0xff + +/* Which transceiver to use. */ +#define XCVR_INTERNAL 0x00 +#define XCVR_EXTERNAL 0x01 +#define XCVR_DUMMY1 0x02 +#define XCVR_DUMMY2 0x03 +#define XCVR_DUMMY3 0x04 + +/* Enable or disable autonegotiation. If this is set to enable, + * the forced link modes above are completely ignored. + */ +#define AUTONEG_DISABLE 0x00 +#define AUTONEG_ENABLE 0x01 + +/* MDI or MDI-X status/control - if MDI/MDI_X/AUTO is set then + * the driver is required to renegotiate link + */ +#define ETH_TP_MDI_INVALID 0x00 /* status: unknown; control: unsupported */ +#define ETH_TP_MDI 0x01 /* status: MDI; control: force MDI */ +#define ETH_TP_MDI_X 0x02 /* status: MDI-X; control: force MDI-X */ +#define ETH_TP_MDI_AUTO 0x03 /* control: auto-select */ + +/* Wake-On-Lan options. */ +#define WAKE_PHY (1 << 0) +#define WAKE_UCAST (1 << 1) +#define WAKE_MCAST (1 << 2) +#define WAKE_BCAST (1 << 3) +#define WAKE_ARP (1 << 4) +#define WAKE_MAGIC (1 << 5) +#define WAKE_MAGICSECURE (1 << 6) /* only meaningful if WAKE_MAGIC */ + +/* L2-L4 network traffic flow types */ +#define TCP_V4_FLOW 0x01 /* hash or spec (tcp_ip4_spec) */ +#define UDP_V4_FLOW 0x02 /* hash or spec (udp_ip4_spec) */ +#define SCTP_V4_FLOW 0x03 /* hash or spec (sctp_ip4_spec) */ +#define AH_ESP_V4_FLOW 0x04 /* hash only */ +#define TCP_V6_FLOW 0x05 /* hash only */ +#define UDP_V6_FLOW 0x06 /* hash only */ +#define SCTP_V6_FLOW 0x07 /* hash only */ +#define AH_ESP_V6_FLOW 0x08 /* hash only */ +#define AH_V4_FLOW 0x09 /* hash or spec (ah_ip4_spec) */ +#define ESP_V4_FLOW 0x0a /* hash or spec (esp_ip4_spec) */ +#define AH_V6_FLOW 0x0b /* hash only */ +#define ESP_V6_FLOW 0x0c /* hash only */ +#define IP_USER_FLOW 0x0d /* spec only (usr_ip4_spec) */ +#define IPV4_FLOW 0x10 /* hash only */ +#define IPV6_FLOW 0x11 /* hash only */ +#define ETHER_FLOW 0x12 /* spec only (ether_spec) */ +/* Flag to enable additional fields in struct ethtool_rx_flow_spec */ +#define FLOW_EXT 0x80000000 + +/* L3-L4 network traffic flow hash options */ +#define RXH_L2DA (1 << 1) +#define RXH_VLAN (1 << 2) +#define RXH_L3_PROTO (1 << 3) +#define RXH_IP_SRC (1 << 4) +#define RXH_IP_DST (1 << 5) +#define RXH_L4_B_0_1 (1 << 6) /* src port in case of TCP/UDP/SCTP */ +#define RXH_L4_B_2_3 (1 << 7) /* dst port in case of TCP/UDP/SCTP */ +#define RXH_DISCARD (1 << 31) + +#define RX_CLS_FLOW_DISC 0xffffffffffffffffULL + +/* Special RX classification rule insert location values */ +#define RX_CLS_LOC_SPECIAL 0x80000000 /* flag */ +#define RX_CLS_LOC_ANY 0xffffffff +#define RX_CLS_LOC_FIRST 0xfffffffe +#define RX_CLS_LOC_LAST 0xfffffffd + +/* EEPROM Standards for plug in modules */ +#define ETH_MODULE_SFF_8079 0x1 +#define ETH_MODULE_SFF_8079_LEN 256 +#define ETH_MODULE_SFF_8472 0x2 +#define ETH_MODULE_SFF_8472_LEN 512 + +/* Reset flags */ +/* The reset() operation must clear the flags for the components which + * were actually reset. On successful return, the flags indicate the + * components which were not reset, either because they do not exist + * in the hardware or because they cannot be reset independently. The + * driver must never reset any components that were not requested. + */ +enum ethtool_reset_flags { + /* These flags represent components dedicated to the interface + * the command is addressed to. Shift any flag left by + * ETH_RESET_SHARED_SHIFT to reset a shared component of the + * same type. + */ + ETH_RESET_MGMT = 1 << 0, /* Management processor */ + ETH_RESET_IRQ = 1 << 1, /* Interrupt requester */ + ETH_RESET_DMA = 1 << 2, /* DMA engine */ + ETH_RESET_FILTER = 1 << 3, /* Filtering/flow direction */ + ETH_RESET_OFFLOAD = 1 << 4, /* Protocol offload */ + ETH_RESET_MAC = 1 << 5, /* Media access controller */ + ETH_RESET_PHY = 1 << 6, /* Transceiver/PHY */ + ETH_RESET_RAM = 1 << 7, /* RAM shared between + * multiple components */ + + ETH_RESET_DEDICATED = 0x0000ffff, /* All components dedicated to + * this interface */ + ETH_RESET_ALL = 0xffffffff, /* All components used by this + * interface, even if shared */ +}; +#define ETH_RESET_SHARED_SHIFT 16 + +#endif /* _UAPI_LINUX_ETHTOOL_H */ diff --git a/include/uapi/linux/eventpoll.h b/include/uapi/linux/eventpoll.h new file mode 100644 index 00000000000..8c99ce7202c --- /dev/null +++ b/include/uapi/linux/eventpoll.h @@ -0,0 +1,66 @@ +/* + * include/linux/eventpoll.h ( Efficient event polling implementation ) + * Copyright (C) 2001,...,2006 Davide Libenzi + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Davide Libenzi <davidel@xmailserver.org> + * + */ + +#ifndef _UAPI_LINUX_EVENTPOLL_H +#define _UAPI_LINUX_EVENTPOLL_H + +/* For O_CLOEXEC */ +#include <linux/fcntl.h> +#include <linux/types.h> + +/* Flags for epoll_create1. */ +#define EPOLL_CLOEXEC O_CLOEXEC + +/* Valid opcodes to issue to sys_epoll_ctl() */ +#define EPOLL_CTL_ADD 1 +#define EPOLL_CTL_DEL 2 +#define EPOLL_CTL_MOD 3 +#define EPOLL_CTL_DISABLE 4 + +/* + * Request the handling of system wakeup events so as to prevent system suspends + * from happening while those events are being processed. + * + * Assuming neither EPOLLET nor EPOLLONESHOT is set, system suspends will not be + * re-allowed until epoll_wait is called again after consuming the wakeup + * event(s). + * + * Requires CAP_BLOCK_SUSPEND + */ +#define EPOLLWAKEUP (1 << 29) + +/* Set the One Shot behaviour for the target file descriptor */ +#define EPOLLONESHOT (1 << 30) + +/* Set the Edge Triggered behaviour for the target file descriptor */ +#define EPOLLET (1 << 31) + +/* + * On x86-64 make the 64bit structure have the same alignment as the + * 32bit structure. This makes 32bit emulation easier. + * + * UML/x86_64 needs the same packing as x86_64 + */ +#ifdef __x86_64__ +#define EPOLL_PACKED __attribute__((packed)) +#else +#define EPOLL_PACKED +#endif + +struct epoll_event { + __u32 events; + __u64 data; +} EPOLL_PACKED; + + +#endif /* _UAPI_LINUX_EVENTPOLL_H */ diff --git a/include/linux/fadvise.h b/include/uapi/linux/fadvise.h index e8e747139b9..e8e747139b9 100644 --- a/include/linux/fadvise.h +++ b/include/uapi/linux/fadvise.h diff --git a/include/uapi/linux/falloc.h b/include/uapi/linux/falloc.h new file mode 100644 index 00000000000..990c4ccf8b6 --- /dev/null +++ b/include/uapi/linux/falloc.h @@ -0,0 +1,9 @@ +#ifndef _UAPI_FALLOC_H_ +#define _UAPI_FALLOC_H_ + +#define FALLOC_FL_KEEP_SIZE 0x01 /* default is extend size */ +#define FALLOC_FL_PUNCH_HOLE 0x02 /* de-allocates range */ +#define FALLOC_FL_NO_HIDE_STALE 0x04 /* reserved codepoint */ + + +#endif /* _UAPI_FALLOC_H_ */ diff --git a/include/uapi/linux/fanotify.h b/include/uapi/linux/fanotify.h new file mode 100644 index 00000000000..030508d195d --- /dev/null +++ b/include/uapi/linux/fanotify.h @@ -0,0 +1,116 @@ +#ifndef _UAPI_LINUX_FANOTIFY_H +#define _UAPI_LINUX_FANOTIFY_H + +#include <linux/types.h> + +/* the following events that user-space can register for */ +#define FAN_ACCESS 0x00000001 /* File was accessed */ +#define FAN_MODIFY 0x00000002 /* File was modified */ +#define FAN_CLOSE_WRITE 0x00000008 /* Writtable file closed */ +#define FAN_CLOSE_NOWRITE 0x00000010 /* Unwrittable file closed */ +#define FAN_OPEN 0x00000020 /* File was opened */ + +#define FAN_Q_OVERFLOW 0x00004000 /* Event queued overflowed */ + +#define FAN_OPEN_PERM 0x00010000 /* File open in perm check */ +#define FAN_ACCESS_PERM 0x00020000 /* File accessed in perm check */ + +#define FAN_ONDIR 0x40000000 /* event occurred against dir */ + +#define FAN_EVENT_ON_CHILD 0x08000000 /* interested in child events */ + +/* helper events */ +#define FAN_CLOSE (FAN_CLOSE_WRITE | FAN_CLOSE_NOWRITE) /* close */ + +/* flags used for fanotify_init() */ +#define FAN_CLOEXEC 0x00000001 +#define FAN_NONBLOCK 0x00000002 + +/* These are NOT bitwise flags. Both bits are used togther. */ +#define FAN_CLASS_NOTIF 0x00000000 +#define FAN_CLASS_CONTENT 0x00000004 +#define FAN_CLASS_PRE_CONTENT 0x00000008 +#define FAN_ALL_CLASS_BITS (FAN_CLASS_NOTIF | FAN_CLASS_CONTENT | \ + FAN_CLASS_PRE_CONTENT) + +#define FAN_UNLIMITED_QUEUE 0x00000010 +#define FAN_UNLIMITED_MARKS 0x00000020 + +#define FAN_ALL_INIT_FLAGS (FAN_CLOEXEC | FAN_NONBLOCK | \ + FAN_ALL_CLASS_BITS | FAN_UNLIMITED_QUEUE |\ + FAN_UNLIMITED_MARKS) + +/* flags used for fanotify_modify_mark() */ +#define FAN_MARK_ADD 0x00000001 +#define FAN_MARK_REMOVE 0x00000002 +#define FAN_MARK_DONT_FOLLOW 0x00000004 +#define FAN_MARK_ONLYDIR 0x00000008 +#define FAN_MARK_MOUNT 0x00000010 +#define FAN_MARK_IGNORED_MASK 0x00000020 +#define FAN_MARK_IGNORED_SURV_MODIFY 0x00000040 +#define FAN_MARK_FLUSH 0x00000080 + +#define FAN_ALL_MARK_FLAGS (FAN_MARK_ADD |\ + FAN_MARK_REMOVE |\ + FAN_MARK_DONT_FOLLOW |\ + FAN_MARK_ONLYDIR |\ + FAN_MARK_MOUNT |\ + FAN_MARK_IGNORED_MASK |\ + FAN_MARK_IGNORED_SURV_MODIFY |\ + FAN_MARK_FLUSH) + +/* + * All of the events - we build the list by hand so that we can add flags in + * the future and not break backward compatibility. Apps will get only the + * events that they originally wanted. Be sure to add new events here! + */ +#define FAN_ALL_EVENTS (FAN_ACCESS |\ + FAN_MODIFY |\ + FAN_CLOSE |\ + FAN_OPEN) + +/* + * All events which require a permission response from userspace + */ +#define FAN_ALL_PERM_EVENTS (FAN_OPEN_PERM |\ + FAN_ACCESS_PERM) + +#define FAN_ALL_OUTGOING_EVENTS (FAN_ALL_EVENTS |\ + FAN_ALL_PERM_EVENTS |\ + FAN_Q_OVERFLOW) + +#define FANOTIFY_METADATA_VERSION 3 + +struct fanotify_event_metadata { + __u32 event_len; + __u8 vers; + __u8 reserved; + __u16 metadata_len; + __aligned_u64 mask; + __s32 fd; + __s32 pid; +}; + +struct fanotify_response { + __s32 fd; + __u32 response; +}; + +/* Legit userspace responses to a _PERM event */ +#define FAN_ALLOW 0x01 +#define FAN_DENY 0x02 +/* No fd set in event */ +#define FAN_NOFD -1 + +/* Helper functions to deal with fanotify_event_metadata buffers */ +#define FAN_EVENT_METADATA_LEN (sizeof(struct fanotify_event_metadata)) + +#define FAN_EVENT_NEXT(meta, len) ((len) -= (meta)->event_len, \ + (struct fanotify_event_metadata*)(((char *)(meta)) + \ + (meta)->event_len)) + +#define FAN_EVENT_OK(meta, len) ((long)(len) >= (long)FAN_EVENT_METADATA_LEN && \ + (long)(meta)->event_len >= (long)FAN_EVENT_METADATA_LEN && \ + (long)(meta)->event_len <= (long)(len)) + +#endif /* _UAPI_LINUX_FANOTIFY_H */ diff --git a/include/uapi/linux/fb.h b/include/uapi/linux/fb.h new file mode 100644 index 00000000000..fb795c3b3c1 --- /dev/null +++ b/include/uapi/linux/fb.h @@ -0,0 +1,402 @@ +#ifndef _UAPI_LINUX_FB_H +#define _UAPI_LINUX_FB_H + +#include <linux/types.h> +#include <linux/i2c.h> + +/* Definitions of frame buffers */ + +#define FB_MAX 32 /* sufficient for now */ + +/* ioctls + 0x46 is 'F' */ +#define FBIOGET_VSCREENINFO 0x4600 +#define FBIOPUT_VSCREENINFO 0x4601 +#define FBIOGET_FSCREENINFO 0x4602 +#define FBIOGETCMAP 0x4604 +#define FBIOPUTCMAP 0x4605 +#define FBIOPAN_DISPLAY 0x4606 +#ifndef __KERNEL__ +#define FBIO_CURSOR _IOWR('F', 0x08, struct fb_cursor) +#endif +/* 0x4607-0x460B are defined below */ +/* #define FBIOGET_MONITORSPEC 0x460C */ +/* #define FBIOPUT_MONITORSPEC 0x460D */ +/* #define FBIOSWITCH_MONIBIT 0x460E */ +#define FBIOGET_CON2FBMAP 0x460F +#define FBIOPUT_CON2FBMAP 0x4610 +#define FBIOBLANK 0x4611 /* arg: 0 or vesa level + 1 */ +#define FBIOGET_VBLANK _IOR('F', 0x12, struct fb_vblank) +#define FBIO_ALLOC 0x4613 +#define FBIO_FREE 0x4614 +#define FBIOGET_GLYPH 0x4615 +#define FBIOGET_HWCINFO 0x4616 +#define FBIOPUT_MODEINFO 0x4617 +#define FBIOGET_DISPINFO 0x4618 +#define FBIO_WAITFORVSYNC _IOW('F', 0x20, __u32) + +#define FB_TYPE_PACKED_PIXELS 0 /* Packed Pixels */ +#define FB_TYPE_PLANES 1 /* Non interleaved planes */ +#define FB_TYPE_INTERLEAVED_PLANES 2 /* Interleaved planes */ +#define FB_TYPE_TEXT 3 /* Text/attributes */ +#define FB_TYPE_VGA_PLANES 4 /* EGA/VGA planes */ +#define FB_TYPE_FOURCC 5 /* Type identified by a V4L2 FOURCC */ + +#define FB_AUX_TEXT_MDA 0 /* Monochrome text */ +#define FB_AUX_TEXT_CGA 1 /* CGA/EGA/VGA Color text */ +#define FB_AUX_TEXT_S3_MMIO 2 /* S3 MMIO fasttext */ +#define FB_AUX_TEXT_MGA_STEP16 3 /* MGA Millenium I: text, attr, 14 reserved bytes */ +#define FB_AUX_TEXT_MGA_STEP8 4 /* other MGAs: text, attr, 6 reserved bytes */ +#define FB_AUX_TEXT_SVGA_GROUP 8 /* 8-15: SVGA tileblit compatible modes */ +#define FB_AUX_TEXT_SVGA_MASK 7 /* lower three bits says step */ +#define FB_AUX_TEXT_SVGA_STEP2 8 /* SVGA text mode: text, attr */ +#define FB_AUX_TEXT_SVGA_STEP4 9 /* SVGA text mode: text, attr, 2 reserved bytes */ +#define FB_AUX_TEXT_SVGA_STEP8 10 /* SVGA text mode: text, attr, 6 reserved bytes */ +#define FB_AUX_TEXT_SVGA_STEP16 11 /* SVGA text mode: text, attr, 14 reserved bytes */ +#define FB_AUX_TEXT_SVGA_LAST 15 /* reserved up to 15 */ + +#define FB_AUX_VGA_PLANES_VGA4 0 /* 16 color planes (EGA/VGA) */ +#define FB_AUX_VGA_PLANES_CFB4 1 /* CFB4 in planes (VGA) */ +#define FB_AUX_VGA_PLANES_CFB8 2 /* CFB8 in planes (VGA) */ + +#define FB_VISUAL_MONO01 0 /* Monochr. 1=Black 0=White */ +#define FB_VISUAL_MONO10 1 /* Monochr. 1=White 0=Black */ +#define FB_VISUAL_TRUECOLOR 2 /* True color */ +#define FB_VISUAL_PSEUDOCOLOR 3 /* Pseudo color (like atari) */ +#define FB_VISUAL_DIRECTCOLOR 4 /* Direct color */ +#define FB_VISUAL_STATIC_PSEUDOCOLOR 5 /* Pseudo color readonly */ +#define FB_VISUAL_FOURCC 6 /* Visual identified by a V4L2 FOURCC */ + +#define FB_ACCEL_NONE 0 /* no hardware accelerator */ +#define FB_ACCEL_ATARIBLITT 1 /* Atari Blitter */ +#define FB_ACCEL_AMIGABLITT 2 /* Amiga Blitter */ +#define FB_ACCEL_S3_TRIO64 3 /* Cybervision64 (S3 Trio64) */ +#define FB_ACCEL_NCR_77C32BLT 4 /* RetinaZ3 (NCR 77C32BLT) */ +#define FB_ACCEL_S3_VIRGE 5 /* Cybervision64/3D (S3 ViRGE) */ +#define FB_ACCEL_ATI_MACH64GX 6 /* ATI Mach 64GX family */ +#define FB_ACCEL_DEC_TGA 7 /* DEC 21030 TGA */ +#define FB_ACCEL_ATI_MACH64CT 8 /* ATI Mach 64CT family */ +#define FB_ACCEL_ATI_MACH64VT 9 /* ATI Mach 64CT family VT class */ +#define FB_ACCEL_ATI_MACH64GT 10 /* ATI Mach 64CT family GT class */ +#define FB_ACCEL_SUN_CREATOR 11 /* Sun Creator/Creator3D */ +#define FB_ACCEL_SUN_CGSIX 12 /* Sun cg6 */ +#define FB_ACCEL_SUN_LEO 13 /* Sun leo/zx */ +#define FB_ACCEL_IMS_TWINTURBO 14 /* IMS Twin Turbo */ +#define FB_ACCEL_3DLABS_PERMEDIA2 15 /* 3Dlabs Permedia 2 */ +#define FB_ACCEL_MATROX_MGA2064W 16 /* Matrox MGA2064W (Millenium) */ +#define FB_ACCEL_MATROX_MGA1064SG 17 /* Matrox MGA1064SG (Mystique) */ +#define FB_ACCEL_MATROX_MGA2164W 18 /* Matrox MGA2164W (Millenium II) */ +#define FB_ACCEL_MATROX_MGA2164W_AGP 19 /* Matrox MGA2164W (Millenium II) */ +#define FB_ACCEL_MATROX_MGAG100 20 /* Matrox G100 (Productiva G100) */ +#define FB_ACCEL_MATROX_MGAG200 21 /* Matrox G200 (Myst, Mill, ...) */ +#define FB_ACCEL_SUN_CG14 22 /* Sun cgfourteen */ +#define FB_ACCEL_SUN_BWTWO 23 /* Sun bwtwo */ +#define FB_ACCEL_SUN_CGTHREE 24 /* Sun cgthree */ +#define FB_ACCEL_SUN_TCX 25 /* Sun tcx */ +#define FB_ACCEL_MATROX_MGAG400 26 /* Matrox G400 */ +#define FB_ACCEL_NV3 27 /* nVidia RIVA 128 */ +#define FB_ACCEL_NV4 28 /* nVidia RIVA TNT */ +#define FB_ACCEL_NV5 29 /* nVidia RIVA TNT2 */ +#define FB_ACCEL_CT_6555x 30 /* C&T 6555x */ +#define FB_ACCEL_3DFX_BANSHEE 31 /* 3Dfx Banshee */ +#define FB_ACCEL_ATI_RAGE128 32 /* ATI Rage128 family */ +#define FB_ACCEL_IGS_CYBER2000 33 /* CyberPro 2000 */ +#define FB_ACCEL_IGS_CYBER2010 34 /* CyberPro 2010 */ +#define FB_ACCEL_IGS_CYBER5000 35 /* CyberPro 5000 */ +#define FB_ACCEL_SIS_GLAMOUR 36 /* SiS 300/630/540 */ +#define FB_ACCEL_3DLABS_PERMEDIA3 37 /* 3Dlabs Permedia 3 */ +#define FB_ACCEL_ATI_RADEON 38 /* ATI Radeon family */ +#define FB_ACCEL_I810 39 /* Intel 810/815 */ +#define FB_ACCEL_SIS_GLAMOUR_2 40 /* SiS 315, 650, 740 */ +#define FB_ACCEL_SIS_XABRE 41 /* SiS 330 ("Xabre") */ +#define FB_ACCEL_I830 42 /* Intel 830M/845G/85x/865G */ +#define FB_ACCEL_NV_10 43 /* nVidia Arch 10 */ +#define FB_ACCEL_NV_20 44 /* nVidia Arch 20 */ +#define FB_ACCEL_NV_30 45 /* nVidia Arch 30 */ +#define FB_ACCEL_NV_40 46 /* nVidia Arch 40 */ +#define FB_ACCEL_XGI_VOLARI_V 47 /* XGI Volari V3XT, V5, V8 */ +#define FB_ACCEL_XGI_VOLARI_Z 48 /* XGI Volari Z7 */ +#define FB_ACCEL_OMAP1610 49 /* TI OMAP16xx */ +#define FB_ACCEL_TRIDENT_TGUI 50 /* Trident TGUI */ +#define FB_ACCEL_TRIDENT_3DIMAGE 51 /* Trident 3DImage */ +#define FB_ACCEL_TRIDENT_BLADE3D 52 /* Trident Blade3D */ +#define FB_ACCEL_TRIDENT_BLADEXP 53 /* Trident BladeXP */ +#define FB_ACCEL_CIRRUS_ALPINE 53 /* Cirrus Logic 543x/544x/5480 */ +#define FB_ACCEL_NEOMAGIC_NM2070 90 /* NeoMagic NM2070 */ +#define FB_ACCEL_NEOMAGIC_NM2090 91 /* NeoMagic NM2090 */ +#define FB_ACCEL_NEOMAGIC_NM2093 92 /* NeoMagic NM2093 */ +#define FB_ACCEL_NEOMAGIC_NM2097 93 /* NeoMagic NM2097 */ +#define FB_ACCEL_NEOMAGIC_NM2160 94 /* NeoMagic NM2160 */ +#define FB_ACCEL_NEOMAGIC_NM2200 95 /* NeoMagic NM2200 */ +#define FB_ACCEL_NEOMAGIC_NM2230 96 /* NeoMagic NM2230 */ +#define FB_ACCEL_NEOMAGIC_NM2360 97 /* NeoMagic NM2360 */ +#define FB_ACCEL_NEOMAGIC_NM2380 98 /* NeoMagic NM2380 */ +#define FB_ACCEL_PXA3XX 99 /* PXA3xx */ + +#define FB_ACCEL_SAVAGE4 0x80 /* S3 Savage4 */ +#define FB_ACCEL_SAVAGE3D 0x81 /* S3 Savage3D */ +#define FB_ACCEL_SAVAGE3D_MV 0x82 /* S3 Savage3D-MV */ +#define FB_ACCEL_SAVAGE2000 0x83 /* S3 Savage2000 */ +#define FB_ACCEL_SAVAGE_MX_MV 0x84 /* S3 Savage/MX-MV */ +#define FB_ACCEL_SAVAGE_MX 0x85 /* S3 Savage/MX */ +#define FB_ACCEL_SAVAGE_IX_MV 0x86 /* S3 Savage/IX-MV */ +#define FB_ACCEL_SAVAGE_IX 0x87 /* S3 Savage/IX */ +#define FB_ACCEL_PROSAVAGE_PM 0x88 /* S3 ProSavage PM133 */ +#define FB_ACCEL_PROSAVAGE_KM 0x89 /* S3 ProSavage KM133 */ +#define FB_ACCEL_S3TWISTER_P 0x8a /* S3 Twister */ +#define FB_ACCEL_S3TWISTER_K 0x8b /* S3 TwisterK */ +#define FB_ACCEL_SUPERSAVAGE 0x8c /* S3 Supersavage */ +#define FB_ACCEL_PROSAVAGE_DDR 0x8d /* S3 ProSavage DDR */ +#define FB_ACCEL_PROSAVAGE_DDRK 0x8e /* S3 ProSavage DDR-K */ + +#define FB_ACCEL_PUV3_UNIGFX 0xa0 /* PKUnity-v3 Unigfx */ + +#define FB_CAP_FOURCC 1 /* Device supports FOURCC-based formats */ + +struct fb_fix_screeninfo { + char id[16]; /* identification string eg "TT Builtin" */ + unsigned long smem_start; /* Start of frame buffer mem */ + /* (physical address) */ + __u32 smem_len; /* Length of frame buffer mem */ + __u32 type; /* see FB_TYPE_* */ + __u32 type_aux; /* Interleave for interleaved Planes */ + __u32 visual; /* see FB_VISUAL_* */ + __u16 xpanstep; /* zero if no hardware panning */ + __u16 ypanstep; /* zero if no hardware panning */ + __u16 ywrapstep; /* zero if no hardware ywrap */ + __u32 line_length; /* length of a line in bytes */ + unsigned long mmio_start; /* Start of Memory Mapped I/O */ + /* (physical address) */ + __u32 mmio_len; /* Length of Memory Mapped I/O */ + __u32 accel; /* Indicate to driver which */ + /* specific chip/card we have */ + __u16 capabilities; /* see FB_CAP_* */ + __u16 reserved[2]; /* Reserved for future compatibility */ +}; + +/* Interpretation of offset for color fields: All offsets are from the right, + * inside a "pixel" value, which is exactly 'bits_per_pixel' wide (means: you + * can use the offset as right argument to <<). A pixel afterwards is a bit + * stream and is written to video memory as that unmodified. + * + * For pseudocolor: offset and length should be the same for all color + * components. Offset specifies the position of the least significant bit + * of the pallette index in a pixel value. Length indicates the number + * of available palette entries (i.e. # of entries = 1 << length). + */ +struct fb_bitfield { + __u32 offset; /* beginning of bitfield */ + __u32 length; /* length of bitfield */ + __u32 msb_right; /* != 0 : Most significant bit is */ + /* right */ +}; + +#define FB_NONSTD_HAM 1 /* Hold-And-Modify (HAM) */ +#define FB_NONSTD_REV_PIX_IN_B 2 /* order of pixels in each byte is reversed */ + +#define FB_ACTIVATE_NOW 0 /* set values immediately (or vbl)*/ +#define FB_ACTIVATE_NXTOPEN 1 /* activate on next open */ +#define FB_ACTIVATE_TEST 2 /* don't set, round up impossible */ +#define FB_ACTIVATE_MASK 15 + /* values */ +#define FB_ACTIVATE_VBL 16 /* activate values on next vbl */ +#define FB_CHANGE_CMAP_VBL 32 /* change colormap on vbl */ +#define FB_ACTIVATE_ALL 64 /* change all VCs on this fb */ +#define FB_ACTIVATE_FORCE 128 /* force apply even when no change*/ +#define FB_ACTIVATE_INV_MODE 256 /* invalidate videomode */ + +#define FB_ACCELF_TEXT 1 /* (OBSOLETE) see fb_info.flags and vc_mode */ + +#define FB_SYNC_HOR_HIGH_ACT 1 /* horizontal sync high active */ +#define FB_SYNC_VERT_HIGH_ACT 2 /* vertical sync high active */ +#define FB_SYNC_EXT 4 /* external sync */ +#define FB_SYNC_COMP_HIGH_ACT 8 /* composite sync high active */ +#define FB_SYNC_BROADCAST 16 /* broadcast video timings */ + /* vtotal = 144d/288n/576i => PAL */ + /* vtotal = 121d/242n/484i => NTSC */ +#define FB_SYNC_ON_GREEN 32 /* sync on green */ + +#define FB_VMODE_NONINTERLACED 0 /* non interlaced */ +#define FB_VMODE_INTERLACED 1 /* interlaced */ +#define FB_VMODE_DOUBLE 2 /* double scan */ +#define FB_VMODE_ODD_FLD_FIRST 4 /* interlaced: top line first */ +#define FB_VMODE_MASK 255 + +#define FB_VMODE_YWRAP 256 /* ywrap instead of panning */ +#define FB_VMODE_SMOOTH_XPAN 512 /* smooth xpan possible (internally used) */ +#define FB_VMODE_CONUPDATE 512 /* don't update x/yoffset */ + +/* + * Display rotation support + */ +#define FB_ROTATE_UR 0 +#define FB_ROTATE_CW 1 +#define FB_ROTATE_UD 2 +#define FB_ROTATE_CCW 3 + +#define PICOS2KHZ(a) (1000000000UL/(a)) +#define KHZ2PICOS(a) (1000000000UL/(a)) + +struct fb_var_screeninfo { + __u32 xres; /* visible resolution */ + __u32 yres; + __u32 xres_virtual; /* virtual resolution */ + __u32 yres_virtual; + __u32 xoffset; /* offset from virtual to visible */ + __u32 yoffset; /* resolution */ + + __u32 bits_per_pixel; /* guess what */ + __u32 grayscale; /* 0 = color, 1 = grayscale, */ + /* >1 = FOURCC */ + struct fb_bitfield red; /* bitfield in fb mem if true color, */ + struct fb_bitfield green; /* else only length is significant */ + struct fb_bitfield blue; + struct fb_bitfield transp; /* transparency */ + + __u32 nonstd; /* != 0 Non standard pixel format */ + + __u32 activate; /* see FB_ACTIVATE_* */ + + __u32 height; /* height of picture in mm */ + __u32 width; /* width of picture in mm */ + + __u32 accel_flags; /* (OBSOLETE) see fb_info.flags */ + + /* Timing: All values in pixclocks, except pixclock (of course) */ + __u32 pixclock; /* pixel clock in ps (pico seconds) */ + __u32 left_margin; /* time from sync to picture */ + __u32 right_margin; /* time from picture to sync */ + __u32 upper_margin; /* time from sync to picture */ + __u32 lower_margin; + __u32 hsync_len; /* length of horizontal sync */ + __u32 vsync_len; /* length of vertical sync */ + __u32 sync; /* see FB_SYNC_* */ + __u32 vmode; /* see FB_VMODE_* */ + __u32 rotate; /* angle we rotate counter clockwise */ + __u32 colorspace; /* colorspace for FOURCC-based modes */ + __u32 reserved[4]; /* Reserved for future compatibility */ +}; + +struct fb_cmap { + __u32 start; /* First entry */ + __u32 len; /* Number of entries */ + __u16 *red; /* Red values */ + __u16 *green; + __u16 *blue; + __u16 *transp; /* transparency, can be NULL */ +}; + +struct fb_con2fbmap { + __u32 console; + __u32 framebuffer; +}; + +/* VESA Blanking Levels */ +#define VESA_NO_BLANKING 0 +#define VESA_VSYNC_SUSPEND 1 +#define VESA_HSYNC_SUSPEND 2 +#define VESA_POWERDOWN 3 + + +enum { + /* screen: unblanked, hsync: on, vsync: on */ + FB_BLANK_UNBLANK = VESA_NO_BLANKING, + + /* screen: blanked, hsync: on, vsync: on */ + FB_BLANK_NORMAL = VESA_NO_BLANKING + 1, + + /* screen: blanked, hsync: on, vsync: off */ + FB_BLANK_VSYNC_SUSPEND = VESA_VSYNC_SUSPEND + 1, + + /* screen: blanked, hsync: off, vsync: on */ + FB_BLANK_HSYNC_SUSPEND = VESA_HSYNC_SUSPEND + 1, + + /* screen: blanked, hsync: off, vsync: off */ + FB_BLANK_POWERDOWN = VESA_POWERDOWN + 1 +}; + +#define FB_VBLANK_VBLANKING 0x001 /* currently in a vertical blank */ +#define FB_VBLANK_HBLANKING 0x002 /* currently in a horizontal blank */ +#define FB_VBLANK_HAVE_VBLANK 0x004 /* vertical blanks can be detected */ +#define FB_VBLANK_HAVE_HBLANK 0x008 /* horizontal blanks can be detected */ +#define FB_VBLANK_HAVE_COUNT 0x010 /* global retrace counter is available */ +#define FB_VBLANK_HAVE_VCOUNT 0x020 /* the vcount field is valid */ +#define FB_VBLANK_HAVE_HCOUNT 0x040 /* the hcount field is valid */ +#define FB_VBLANK_VSYNCING 0x080 /* currently in a vsync */ +#define FB_VBLANK_HAVE_VSYNC 0x100 /* verical syncs can be detected */ + +struct fb_vblank { + __u32 flags; /* FB_VBLANK flags */ + __u32 count; /* counter of retraces since boot */ + __u32 vcount; /* current scanline position */ + __u32 hcount; /* current scandot position */ + __u32 reserved[4]; /* reserved for future compatibility */ +}; + +/* Internal HW accel */ +#define ROP_COPY 0 +#define ROP_XOR 1 + +struct fb_copyarea { + __u32 dx; + __u32 dy; + __u32 width; + __u32 height; + __u32 sx; + __u32 sy; +}; + +struct fb_fillrect { + __u32 dx; /* screen-relative */ + __u32 dy; + __u32 width; + __u32 height; + __u32 color; + __u32 rop; +}; + +struct fb_image { + __u32 dx; /* Where to place image */ + __u32 dy; + __u32 width; /* Size of image */ + __u32 height; + __u32 fg_color; /* Only used when a mono bitmap */ + __u32 bg_color; + __u8 depth; /* Depth of the image */ + const char *data; /* Pointer to image data */ + struct fb_cmap cmap; /* color map info */ +}; + +/* + * hardware cursor control + */ + +#define FB_CUR_SETIMAGE 0x01 +#define FB_CUR_SETPOS 0x02 +#define FB_CUR_SETHOT 0x04 +#define FB_CUR_SETCMAP 0x08 +#define FB_CUR_SETSHAPE 0x10 +#define FB_CUR_SETSIZE 0x20 +#define FB_CUR_SETALL 0xFF + +struct fbcurpos { + __u16 x, y; +}; + +struct fb_cursor { + __u16 set; /* what to set */ + __u16 enable; /* cursor on/off */ + __u16 rop; /* bitop operation */ + const char *mask; /* cursor mask bits */ + struct fbcurpos hot; /* cursor hot spot */ + struct fb_image image; /* Cursor image */ +}; + +#ifdef CONFIG_FB_BACKLIGHT +/* Settings for the generic backlight code */ +#define FB_BACKLIGHT_LEVELS 128 +#define FB_BACKLIGHT_MAX 0xFF +#endif + + +#endif /* _UAPI_LINUX_FB_H */ diff --git a/include/uapi/linux/fcntl.h b/include/uapi/linux/fcntl.h new file mode 100644 index 00000000000..074b886c6be --- /dev/null +++ b/include/uapi/linux/fcntl.h @@ -0,0 +1,52 @@ +#ifndef _UAPI_LINUX_FCNTL_H +#define _UAPI_LINUX_FCNTL_H + +#include <asm/fcntl.h> + +#define F_SETLEASE (F_LINUX_SPECIFIC_BASE + 0) +#define F_GETLEASE (F_LINUX_SPECIFIC_BASE + 1) + +/* + * Cancel a blocking posix lock; internal use only until we expose an + * asynchronous lock api to userspace: + */ +#define F_CANCELLK (F_LINUX_SPECIFIC_BASE + 5) + +/* Create a file descriptor with FD_CLOEXEC set. */ +#define F_DUPFD_CLOEXEC (F_LINUX_SPECIFIC_BASE + 6) + +/* + * Request nofications on a directory. + * See below for events that may be notified. + */ +#define F_NOTIFY (F_LINUX_SPECIFIC_BASE+2) + +/* + * Set and get of pipe page size array + */ +#define F_SETPIPE_SZ (F_LINUX_SPECIFIC_BASE + 7) +#define F_GETPIPE_SZ (F_LINUX_SPECIFIC_BASE + 8) + +/* + * Types of directory notifications that may be requested. + */ +#define DN_ACCESS 0x00000001 /* File accessed */ +#define DN_MODIFY 0x00000002 /* File modified */ +#define DN_CREATE 0x00000004 /* File created */ +#define DN_DELETE 0x00000008 /* File removed */ +#define DN_RENAME 0x00000010 /* File renamed */ +#define DN_ATTRIB 0x00000020 /* File changed attibutes */ +#define DN_MULTISHOT 0x80000000 /* Don't remove notifier */ + +#define AT_FDCWD -100 /* Special value used to indicate + openat should use the current + working directory. */ +#define AT_SYMLINK_NOFOLLOW 0x100 /* Do not follow symbolic links. */ +#define AT_REMOVEDIR 0x200 /* Remove directory instead of + unlinking file. */ +#define AT_SYMLINK_FOLLOW 0x400 /* Follow symbolic links. */ +#define AT_NO_AUTOMOUNT 0x800 /* Suppress terminal automount traversal */ +#define AT_EMPTY_PATH 0x1000 /* Allow empty relative pathname */ + + +#endif /* _UAPI_LINUX_FCNTL_H */ diff --git a/include/uapi/linux/fd.h b/include/uapi/linux/fd.h new file mode 100644 index 00000000000..f1f3dd5981b --- /dev/null +++ b/include/uapi/linux/fd.h @@ -0,0 +1,382 @@ +#ifndef _UAPI_LINUX_FD_H +#define _UAPI_LINUX_FD_H + +#include <linux/ioctl.h> +#include <linux/compiler.h> + +/* New file layout: Now the ioctl definitions immediately follow the + * definitions of the structures that they use */ + +/* + * Geometry + */ +struct floppy_struct { + unsigned int size, /* nr of sectors total */ + sect, /* sectors per track */ + head, /* nr of heads */ + track, /* nr of tracks */ + stretch; /* bit 0 !=0 means double track steps */ + /* bit 1 != 0 means swap sides */ + /* bits 2..9 give the first sector */ + /* number (the LSB is flipped) */ +#define FD_STRETCH 1 +#define FD_SWAPSIDES 2 +#define FD_ZEROBASED 4 +#define FD_SECTBASEMASK 0x3FC +#define FD_MKSECTBASE(s) (((s) ^ 1) << 2) +#define FD_SECTBASE(floppy) ((((floppy)->stretch & FD_SECTBASEMASK) >> 2) ^ 1) + + unsigned char gap, /* gap1 size */ + + rate, /* data rate. |= 0x40 for perpendicular */ +#define FD_2M 0x4 +#define FD_SIZECODEMASK 0x38 +#define FD_SIZECODE(floppy) (((((floppy)->rate&FD_SIZECODEMASK)>> 3)+ 2) %8) +#define FD_SECTSIZE(floppy) ( (floppy)->rate & FD_2M ? \ + 512 : 128 << FD_SIZECODE(floppy) ) +#define FD_PERP 0x40 + + spec1, /* stepping rate, head unload time */ + fmt_gap; /* gap2 size */ + const char * name; /* used only for predefined formats */ +}; + + +/* commands needing write access have 0x40 set */ +/* commands needing super user access have 0x80 set */ + +#define FDCLRPRM _IO(2, 0x41) +/* clear user-defined parameters */ + +#define FDSETPRM _IOW(2, 0x42, struct floppy_struct) +#define FDSETMEDIAPRM FDSETPRM +/* set user-defined parameters for current media */ + +#define FDDEFPRM _IOW(2, 0x43, struct floppy_struct) +#define FDGETPRM _IOR(2, 0x04, struct floppy_struct) +#define FDDEFMEDIAPRM FDDEFPRM +#define FDGETMEDIAPRM FDGETPRM +/* set/get disk parameters */ + + +#define FDMSGON _IO(2,0x45) +#define FDMSGOFF _IO(2,0x46) +/* issue/don't issue kernel messages on media type change */ + + +/* + * Formatting (obsolete) + */ +#define FD_FILL_BYTE 0xF6 /* format fill byte. */ + +struct format_descr { + unsigned int device,head,track; +}; + +#define FDFMTBEG _IO(2,0x47) +/* begin formatting a disk */ +#define FDFMTTRK _IOW(2,0x48, struct format_descr) +/* format the specified track */ +#define FDFMTEND _IO(2,0x49) +/* end formatting a disk */ + + +/* + * Error thresholds + */ +struct floppy_max_errors { + unsigned int + abort, /* number of errors to be reached before aborting */ + read_track, /* maximal number of errors permitted to read an + * entire track at once */ + reset, /* maximal number of errors before a reset is tried */ + recal, /* maximal number of errors before a recalibrate is + * tried */ + + /* + * Threshold for reporting FDC errors to the console. + * Setting this to zero may flood your screen when using + * ultra cheap floppies ;-) + */ + reporting; + +}; + +#define FDSETEMSGTRESH _IO(2,0x4a) +/* set fdc error reporting threshold */ + +#define FDFLUSH _IO(2,0x4b) +/* flush buffers for media; either for verifying media, or for + * handling a media change without closing the file descriptor */ + +#define FDSETMAXERRS _IOW(2, 0x4c, struct floppy_max_errors) +#define FDGETMAXERRS _IOR(2, 0x0e, struct floppy_max_errors) +/* set/get abortion and read_track threshold. See also floppy_drive_params + * structure */ + + +typedef char floppy_drive_name[16]; +#define FDGETDRVTYP _IOR(2, 0x0f, floppy_drive_name) +/* get drive type: 5 1/4 or 3 1/2 */ + + +/* + * Drive parameters (user modifiable) + */ +struct floppy_drive_params { + signed char cmos; /* CMOS type */ + + /* Spec2 is (HLD<<1 | ND), where HLD is head load time (1=2ms, 2=4 ms + * etc) and ND is set means no DMA. Hardcoded to 6 (HLD=6ms, use DMA). + */ + unsigned long max_dtr; /* Step rate, usec */ + unsigned long hlt; /* Head load/settle time, msec */ + unsigned long hut; /* Head unload time (remnant of + * 8" drives) */ + unsigned long srt; /* Step rate, usec */ + + unsigned long spinup; /* time needed for spinup (expressed + * in jiffies) */ + unsigned long spindown; /* timeout needed for spindown */ + unsigned char spindown_offset; /* decides in which position the disk + * will stop */ + unsigned char select_delay; /* delay to wait after select */ + unsigned char rps; /* rotations per second */ + unsigned char tracks; /* maximum number of tracks */ + unsigned long timeout; /* timeout for interrupt requests */ + + unsigned char interleave_sect; /* if there are more sectors, use + * interleave */ + + struct floppy_max_errors max_errors; + + char flags; /* various flags, including ftd_msg */ +/* + * Announce successful media type detection and media information loss after + * disk changes. + * Also used to enable/disable printing of overrun warnings. + */ + +#define FTD_MSG 0x10 +#define FD_BROKEN_DCL 0x20 +#define FD_DEBUG 0x02 +#define FD_SILENT_DCL_CLEAR 0x4 +#define FD_INVERTED_DCL 0x80 /* must be 0x80, because of hardware + considerations */ + + char read_track; /* use readtrack during probing? */ + +/* + * Auto-detection. Each drive type has eight formats which are + * used in succession to try to read the disk. If the FDC cannot lock onto + * the disk, the next format is tried. This uses the variable 'probing'. + */ + short autodetect[8]; /* autodetected formats */ + + int checkfreq; /* how often should the drive be checked for disk + * changes */ + int native_format; /* native format of this drive */ +}; + +enum { + FD_NEED_TWADDLE_BIT, /* more magic */ + FD_VERIFY_BIT, /* inquire for write protection */ + FD_DISK_NEWCHANGE_BIT, /* change detected, and no action undertaken yet + * to clear media change status */ + FD_UNUSED_BIT, + FD_DISK_CHANGED_BIT, /* disk has been changed since last i/o */ + FD_DISK_WRITABLE_BIT /* disk is writable */ +}; + +#define FDSETDRVPRM _IOW(2, 0x90, struct floppy_drive_params) +#define FDGETDRVPRM _IOR(2, 0x11, struct floppy_drive_params) +/* set/get drive parameters */ + + +/* + * Current drive state (not directly modifiable by user, readonly) + */ +struct floppy_drive_struct { + unsigned long flags; +/* values for these flags */ +#define FD_NEED_TWADDLE (1 << FD_NEED_TWADDLE_BIT) +#define FD_VERIFY (1 << FD_VERIFY_BIT) +#define FD_DISK_NEWCHANGE (1 << FD_DISK_NEWCHANGE_BIT) +#define FD_DISK_CHANGED (1 << FD_DISK_CHANGED_BIT) +#define FD_DISK_WRITABLE (1 << FD_DISK_WRITABLE_BIT) + + unsigned long spinup_date; + unsigned long select_date; + unsigned long first_read_date; + short probed_format; + short track; /* current track */ + short maxblock; /* id of highest block read */ + short maxtrack; /* id of highest half track read */ + int generation; /* how many diskchanges? */ + +/* + * (User-provided) media information is _not_ discarded after a media change + * if the corresponding keep_data flag is non-zero. Positive values are + * decremented after each probe. + */ + int keep_data; + + /* Prevent "aliased" accesses. */ + int fd_ref; + int fd_device; + unsigned long last_checked; /* when was the drive last checked for a disk + * change? */ + + char *dmabuf; + int bufblocks; +}; + +#define FDGETDRVSTAT _IOR(2, 0x12, struct floppy_drive_struct) +#define FDPOLLDRVSTAT _IOR(2, 0x13, struct floppy_drive_struct) +/* get drive state: GET returns the cached state, POLL polls for new state */ + + +/* + * reset FDC + */ +enum reset_mode { + FD_RESET_IF_NEEDED, /* reset only if the reset flags is set */ + FD_RESET_IF_RAWCMD, /* obsolete */ + FD_RESET_ALWAYS /* reset always */ +}; +#define FDRESET _IO(2, 0x54) + + +/* + * FDC state + */ +struct floppy_fdc_state { + int spec1; /* spec1 value last used */ + int spec2; /* spec2 value last used */ + int dtr; + unsigned char version; /* FDC version code */ + unsigned char dor; + unsigned long address; /* io address */ + unsigned int rawcmd:2; + unsigned int reset:1; + unsigned int need_configure:1; + unsigned int perp_mode:2; + unsigned int has_fifo:1; + unsigned int driver_version; /* version code for floppy driver */ +#define FD_DRIVER_VERSION 0x100 +/* user programs using the floppy API should use floppy_fdc_state to + * get the version number of the floppy driver that they are running + * on. If this version number is bigger than the one compiled into the + * user program (the FD_DRIVER_VERSION define), it should be prepared + * to bigger structures + */ + + unsigned char track[4]; + /* Position of the heads of the 4 units attached to this FDC, + * as stored on the FDC. In the future, the position as stored + * on the FDC might not agree with the actual physical + * position of these drive heads. By allowing such + * disagreement, it will be possible to reset the FDC without + * incurring the expensive cost of repositioning all heads. + * Right now, these positions are hard wired to 0. */ + +}; + +#define FDGETFDCSTAT _IOR(2, 0x15, struct floppy_fdc_state) + + +/* + * Asynchronous Write error tracking + */ +struct floppy_write_errors { + /* Write error logging. + * + * These fields can be cleared with the FDWERRORCLR ioctl. + * Only writes that were attempted but failed due to a physical media + * error are logged. write(2) calls that fail and return an error code + * to the user process are not counted. + */ + + unsigned int write_errors; /* number of physical write errors + * encountered */ + + /* position of first and last write errors */ + unsigned long first_error_sector; + int first_error_generation; + unsigned long last_error_sector; + int last_error_generation; + + unsigned int badness; /* highest retry count for a read or write + * operation */ +}; + +#define FDWERRORCLR _IO(2, 0x56) +/* clear write error and badness information */ +#define FDWERRORGET _IOR(2, 0x17, struct floppy_write_errors) +/* get write error and badness information */ + + +/* + * Raw commands + */ +/* new interface flag: now we can do them in batches */ +#define FDHAVEBATCHEDRAWCMD + +struct floppy_raw_cmd { + unsigned int flags; +#define FD_RAW_READ 1 +#define FD_RAW_WRITE 2 +#define FD_RAW_NO_MOTOR 4 +#define FD_RAW_DISK_CHANGE 4 /* out: disk change flag was set */ +#define FD_RAW_INTR 8 /* wait for an interrupt */ +#define FD_RAW_SPIN 0x10 /* spin up the disk for this command */ +#define FD_RAW_NO_MOTOR_AFTER 0x20 /* switch the motor off after command + * completion */ +#define FD_RAW_NEED_DISK 0x40 /* this command needs a disk to be present */ +#define FD_RAW_NEED_SEEK 0x80 /* this command uses an implied seek (soft) */ + +/* more "in" flags */ +#define FD_RAW_MORE 0x100 /* more records follow */ +#define FD_RAW_STOP_IF_FAILURE 0x200 /* stop if we encounter a failure */ +#define FD_RAW_STOP_IF_SUCCESS 0x400 /* stop if command successful */ +#define FD_RAW_SOFTFAILURE 0x800 /* consider the return value for failure + * detection too */ + +/* more "out" flags */ +#define FD_RAW_FAILURE 0x10000 /* command sent to fdc, fdc returned error */ +#define FD_RAW_HARDFAILURE 0x20000 /* fdc had to be reset, or timed out */ + + void __user *data; + char *kernel_data; /* location of data buffer in the kernel */ + struct floppy_raw_cmd *next; /* used for chaining of raw cmd's + * within the kernel */ + long length; /* in: length of dma transfer. out: remaining bytes */ + long phys_length; /* physical length, if different from dma length */ + int buffer_length; /* length of allocated buffer */ + + unsigned char rate; + unsigned char cmd_count; + unsigned char cmd[16]; + unsigned char reply_count; + unsigned char reply[16]; + int track; + int resultcode; + + int reserved1; + int reserved2; +}; + +#define FDRAWCMD _IO(2, 0x58) +/* send a raw command to the fdc. Structure size not included, because of + * batches */ + +#define FDTWADDLE _IO(2, 0x59) +/* flicker motor-on bit before reading a sector. Experimental */ + + +#define FDEJECT _IO(2, 0x5a) +/* eject the disk */ + + + +#endif /* _UAPI_LINUX_FD_H */ diff --git a/include/linux/fdreg.h b/include/uapi/linux/fdreg.h index 61ce6416900..61ce6416900 100644 --- a/include/linux/fdreg.h +++ b/include/uapi/linux/fdreg.h diff --git a/include/linux/fib_rules.h b/include/uapi/linux/fib_rules.h index 51da65b68b8..51da65b68b8 100644 --- a/include/linux/fib_rules.h +++ b/include/uapi/linux/fib_rules.h diff --git a/include/linux/fiemap.h b/include/uapi/linux/fiemap.h index d830747f5c0..d830747f5c0 100644 --- a/include/linux/fiemap.h +++ b/include/uapi/linux/fiemap.h diff --git a/include/uapi/linux/filter.h b/include/uapi/linux/filter.h new file mode 100644 index 00000000000..3d7922433ab --- /dev/null +++ b/include/uapi/linux/filter.h @@ -0,0 +1,135 @@ +/* + * Linux Socket Filter Data Structures + */ + +#ifndef _UAPI__LINUX_FILTER_H__ +#define _UAPI__LINUX_FILTER_H__ + +#include <linux/compiler.h> +#include <linux/types.h> + + +/* + * Current version of the filter code architecture. + */ +#define BPF_MAJOR_VERSION 1 +#define BPF_MINOR_VERSION 1 + +/* + * Try and keep these values and structures similar to BSD, especially + * the BPF code definitions which need to match so you can share filters + */ + +struct sock_filter { /* Filter block */ + __u16 code; /* Actual filter code */ + __u8 jt; /* Jump true */ + __u8 jf; /* Jump false */ + __u32 k; /* Generic multiuse field */ +}; + +struct sock_fprog { /* Required for SO_ATTACH_FILTER. */ + unsigned short len; /* Number of filter blocks */ + struct sock_filter __user *filter; +}; + +/* + * Instruction classes + */ + +#define BPF_CLASS(code) ((code) & 0x07) +#define BPF_LD 0x00 +#define BPF_LDX 0x01 +#define BPF_ST 0x02 +#define BPF_STX 0x03 +#define BPF_ALU 0x04 +#define BPF_JMP 0x05 +#define BPF_RET 0x06 +#define BPF_MISC 0x07 + +/* ld/ldx fields */ +#define BPF_SIZE(code) ((code) & 0x18) +#define BPF_W 0x00 +#define BPF_H 0x08 +#define BPF_B 0x10 +#define BPF_MODE(code) ((code) & 0xe0) +#define BPF_IMM 0x00 +#define BPF_ABS 0x20 +#define BPF_IND 0x40 +#define BPF_MEM 0x60 +#define BPF_LEN 0x80 +#define BPF_MSH 0xa0 + +/* alu/jmp fields */ +#define BPF_OP(code) ((code) & 0xf0) +#define BPF_ADD 0x00 +#define BPF_SUB 0x10 +#define BPF_MUL 0x20 +#define BPF_DIV 0x30 +#define BPF_OR 0x40 +#define BPF_AND 0x50 +#define BPF_LSH 0x60 +#define BPF_RSH 0x70 +#define BPF_NEG 0x80 +#define BPF_MOD 0x90 +#define BPF_XOR 0xa0 + +#define BPF_JA 0x00 +#define BPF_JEQ 0x10 +#define BPF_JGT 0x20 +#define BPF_JGE 0x30 +#define BPF_JSET 0x40 +#define BPF_SRC(code) ((code) & 0x08) +#define BPF_K 0x00 +#define BPF_X 0x08 + +/* ret - BPF_K and BPF_X also apply */ +#define BPF_RVAL(code) ((code) & 0x18) +#define BPF_A 0x10 + +/* misc */ +#define BPF_MISCOP(code) ((code) & 0xf8) +#define BPF_TAX 0x00 +#define BPF_TXA 0x80 + +#ifndef BPF_MAXINSNS +#define BPF_MAXINSNS 4096 +#endif + +/* + * Macros for filter block array initializers. + */ +#ifndef BPF_STMT +#define BPF_STMT(code, k) { (unsigned short)(code), 0, 0, k } +#endif +#ifndef BPF_JUMP +#define BPF_JUMP(code, k, jt, jf) { (unsigned short)(code), jt, jf, k } +#endif + +/* + * Number of scratch memory words for: BPF_ST and BPF_STX + */ +#define BPF_MEMWORDS 16 + +/* RATIONALE. Negative offsets are invalid in BPF. + We use them to reference ancillary data. + Unlike introduction new instructions, it does not break + existing compilers/optimizers. + */ +#define SKF_AD_OFF (-0x1000) +#define SKF_AD_PROTOCOL 0 +#define SKF_AD_PKTTYPE 4 +#define SKF_AD_IFINDEX 8 +#define SKF_AD_NLATTR 12 +#define SKF_AD_NLATTR_NEST 16 +#define SKF_AD_MARK 20 +#define SKF_AD_QUEUE 24 +#define SKF_AD_HATYPE 28 +#define SKF_AD_RXHASH 32 +#define SKF_AD_CPU 36 +#define SKF_AD_ALU_XOR_X 40 +#define SKF_AD_MAX 44 +#define SKF_NET_OFF (-0x100000) +#define SKF_LL_OFF (-0x200000) + + +#endif /* _UAPI__LINUX_FILTER_H__ */ diff --git a/include/linux/firewire-cdev.h b/include/uapi/linux/firewire-cdev.h index d5003695349..d5003695349 100644 --- a/include/linux/firewire-cdev.h +++ b/include/uapi/linux/firewire-cdev.h diff --git a/include/linux/firewire-constants.h b/include/uapi/linux/firewire-constants.h index 9b4bb5fbba4..9b4bb5fbba4 100644 --- a/include/linux/firewire-constants.h +++ b/include/uapi/linux/firewire-constants.h diff --git a/include/uapi/linux/flat.h b/include/uapi/linux/flat.h new file mode 100644 index 00000000000..88cd6baba8f --- /dev/null +++ b/include/uapi/linux/flat.h @@ -0,0 +1,58 @@ +/* + * Copyright (C) 2002-2003 David McCullough <davidm@snapgear.com> + * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com> + * The Silver Hammer Group, Ltd. + * + * This file provides the definitions and structures needed to + * support uClinux flat-format executables. + */ + +#ifndef _UAPI_LINUX_FLAT_H +#define _UAPI_LINUX_FLAT_H + + +#define FLAT_VERSION 0x00000004L + +#ifdef CONFIG_BINFMT_SHARED_FLAT +#define MAX_SHARED_LIBS (4) +#else +#define MAX_SHARED_LIBS (1) +#endif + +/* + * To make everything easier to port and manage cross platform + * development, all fields are in network byte order. + */ + +struct flat_hdr { + char magic[4]; + unsigned long rev; /* version (as above) */ + unsigned long entry; /* Offset of first executable instruction + with text segment from beginning of file */ + unsigned long data_start; /* Offset of data segment from beginning of + file */ + unsigned long data_end; /* Offset of end of data segment + from beginning of file */ + unsigned long bss_end; /* Offset of end of bss segment from beginning + of file */ + + /* (It is assumed that data_end through bss_end forms the bss segment.) */ + + unsigned long stack_size; /* Size of stack, in bytes */ + unsigned long reloc_start; /* Offset of relocation records from + beginning of file */ + unsigned long reloc_count; /* Number of relocation records */ + unsigned long flags; + unsigned long build_date; /* When the program/library was built */ + unsigned long filler[5]; /* Reservered, set to zero */ +}; + +#define FLAT_FLAG_RAM 0x0001 /* load program entirely into RAM */ +#define FLAT_FLAG_GOTPIC 0x0002 /* program is PIC with GOT */ +#define FLAT_FLAG_GZIP 0x0004 /* all but the header is compressed */ +#define FLAT_FLAG_GZDATA 0x0008 /* only data/relocs are compressed (for XIP) */ +#define FLAT_FLAG_KTRACE 0x0010 /* output useful kernel trace for debugging */ + + + +#endif /* _UAPI_LINUX_FLAT_H */ diff --git a/include/uapi/linux/fs.h b/include/uapi/linux/fs.h new file mode 100644 index 00000000000..9fcc880d4be --- /dev/null +++ b/include/uapi/linux/fs.h @@ -0,0 +1,334 @@ +#ifndef _UAPI_LINUX_FS_H +#define _UAPI_LINUX_FS_H + +/* + * This file has definitions for some important file table + * structures etc. + */ + +#include <linux/limits.h> +#include <linux/ioctl.h> +#include <linux/types.h> + +/* + * It's silly to have NR_OPEN bigger than NR_FILE, but you can change + * the file limit at runtime and only root can increase the per-process + * nr_file rlimit, so it's safe to set up a ridiculously high absolute + * upper limit on files-per-process. + * + * Some programs (notably those using select()) may have to be + * recompiled to take full advantage of the new limits.. + */ + +/* Fixed constants first: */ +#undef NR_OPEN +#define INR_OPEN_CUR 1024 /* Initial setting for nfile rlimits */ +#define INR_OPEN_MAX 4096 /* Hard limit for nfile rlimits */ + +#define BLOCK_SIZE_BITS 10 +#define BLOCK_SIZE (1<<BLOCK_SIZE_BITS) + +#define SEEK_SET 0 /* seek relative to beginning of file */ +#define SEEK_CUR 1 /* seek relative to current file position */ +#define SEEK_END 2 /* seek relative to end of file */ +#define SEEK_DATA 3 /* seek to the next data */ +#define SEEK_HOLE 4 /* seek to the next hole */ +#define SEEK_MAX SEEK_HOLE + +struct fstrim_range { + __u64 start; + __u64 len; + __u64 minlen; +}; + +/* And dynamically-tunable limits and defaults: */ +struct files_stat_struct { + unsigned long nr_files; /* read only */ + unsigned long nr_free_files; /* read only */ + unsigned long max_files; /* tunable */ +}; + +struct inodes_stat_t { + int nr_inodes; + int nr_unused; + int dummy[5]; /* padding for sysctl ABI compatibility */ +}; + + +#define NR_FILE 8192 /* this can well be larger on a larger system */ + +#define MAY_EXEC 0x00000001 +#define MAY_WRITE 0x00000002 +#define MAY_READ 0x00000004 +#define MAY_APPEND 0x00000008 +#define MAY_ACCESS 0x00000010 +#define MAY_OPEN 0x00000020 +#define MAY_CHDIR 0x00000040 +/* called from RCU mode, don't block */ +#define MAY_NOT_BLOCK 0x00000080 + +/* + * flags in file.f_mode. Note that FMODE_READ and FMODE_WRITE must correspond + * to O_WRONLY and O_RDWR via the strange trick in __dentry_open() + */ + +/* file is open for reading */ +#define FMODE_READ ((__force fmode_t)0x1) +/* file is open for writing */ +#define FMODE_WRITE ((__force fmode_t)0x2) +/* file is seekable */ +#define FMODE_LSEEK ((__force fmode_t)0x4) +/* file can be accessed using pread */ +#define FMODE_PREAD ((__force fmode_t)0x8) +/* file can be accessed using pwrite */ +#define FMODE_PWRITE ((__force fmode_t)0x10) +/* File is opened for execution with sys_execve / sys_uselib */ +#define FMODE_EXEC ((__force fmode_t)0x20) +/* File is opened with O_NDELAY (only set for block devices) */ +#define FMODE_NDELAY ((__force fmode_t)0x40) +/* File is opened with O_EXCL (only set for block devices) */ +#define FMODE_EXCL ((__force fmode_t)0x80) +/* File is opened using open(.., 3, ..) and is writeable only for ioctls + (specialy hack for floppy.c) */ +#define FMODE_WRITE_IOCTL ((__force fmode_t)0x100) +/* 32bit hashes as llseek() offset (for directories) */ +#define FMODE_32BITHASH ((__force fmode_t)0x200) +/* 64bit hashes as llseek() offset (for directories) */ +#define FMODE_64BITHASH ((__force fmode_t)0x400) + +/* + * Don't update ctime and mtime. + * + * Currently a special hack for the XFS open_by_handle ioctl, but we'll + * hopefully graduate it to a proper O_CMTIME flag supported by open(2) soon. + */ +#define FMODE_NOCMTIME ((__force fmode_t)0x800) + +/* Expect random access pattern */ +#define FMODE_RANDOM ((__force fmode_t)0x1000) + +/* File is huge (eg. /dev/kmem): treat loff_t as unsigned */ +#define FMODE_UNSIGNED_OFFSET ((__force fmode_t)0x2000) + +/* File is opened with O_PATH; almost nothing can be done with it */ +#define FMODE_PATH ((__force fmode_t)0x4000) + +/* File was opened by fanotify and shouldn't generate fanotify events */ +#define FMODE_NONOTIFY ((__force fmode_t)0x1000000) + +/* + * Flag for rw_copy_check_uvector and compat_rw_copy_check_uvector + * that indicates that they should check the contents of the iovec are + * valid, but not check the memory that the iovec elements + * points too. + */ +#define CHECK_IOVEC_ONLY -1 + +#define SEL_IN 1 +#define SEL_OUT 2 +#define SEL_EX 4 + +/* public flags for file_system_type */ +#define FS_REQUIRES_DEV 1 +#define FS_BINARY_MOUNTDATA 2 +#define FS_HAS_SUBTYPE 4 +#define FS_REVAL_DOT 16384 /* Check the paths ".", ".." for staleness */ +#define FS_RENAME_DOES_D_MOVE 32768 /* FS will handle d_move() + * during rename() internally. + */ + +/* + * These are the fs-independent mount-flags: up to 32 flags are supported + */ +#define MS_RDONLY 1 /* Mount read-only */ +#define MS_NOSUID 2 /* Ignore suid and sgid bits */ +#define MS_NODEV 4 /* Disallow access to device special files */ +#define MS_NOEXEC 8 /* Disallow program execution */ +#define MS_SYNCHRONOUS 16 /* Writes are synced at once */ +#define MS_REMOUNT 32 /* Alter flags of a mounted FS */ +#define MS_MANDLOCK 64 /* Allow mandatory locks on an FS */ +#define MS_DIRSYNC 128 /* Directory modifications are synchronous */ +#define MS_NOATIME 1024 /* Do not update access times. */ +#define MS_NODIRATIME 2048 /* Do not update directory access times */ +#define MS_BIND 4096 +#define MS_MOVE 8192 +#define MS_REC 16384 +#define MS_VERBOSE 32768 /* War is peace. Verbosity is silence. + MS_VERBOSE is deprecated. */ +#define MS_SILENT 32768 +#define MS_POSIXACL (1<<16) /* VFS does not apply the umask */ +#define MS_UNBINDABLE (1<<17) /* change to unbindable */ +#define MS_PRIVATE (1<<18) /* change to private */ +#define MS_SLAVE (1<<19) /* change to slave */ +#define MS_SHARED (1<<20) /* change to shared */ +#define MS_RELATIME (1<<21) /* Update atime relative to mtime/ctime. */ +#define MS_KERNMOUNT (1<<22) /* this is a kern_mount call */ +#define MS_I_VERSION (1<<23) /* Update inode I_version field */ +#define MS_STRICTATIME (1<<24) /* Always perform atime updates */ +#define MS_NOSEC (1<<28) +#define MS_BORN (1<<29) +#define MS_ACTIVE (1<<30) +#define MS_NOUSER (1<<31) + +/* + * Superblock flags that can be altered by MS_REMOUNT + */ +#define MS_RMT_MASK (MS_RDONLY|MS_SYNCHRONOUS|MS_MANDLOCK|MS_I_VERSION) + +/* + * Old magic mount flag and mask + */ +#define MS_MGC_VAL 0xC0ED0000 +#define MS_MGC_MSK 0xffff0000 + +/* Inode flags - they have nothing to superblock flags now */ + +#define S_SYNC 1 /* Writes are synced at once */ +#define S_NOATIME 2 /* Do not update access times */ +#define S_APPEND 4 /* Append-only file */ +#define S_IMMUTABLE 8 /* Immutable file */ +#define S_DEAD 16 /* removed, but still open directory */ +#define S_NOQUOTA 32 /* Inode is not counted to quota */ +#define S_DIRSYNC 64 /* Directory modifications are synchronous */ +#define S_NOCMTIME 128 /* Do not update file c/mtime */ +#define S_SWAPFILE 256 /* Do not truncate: swapon got its bmaps */ +#define S_PRIVATE 512 /* Inode is fs-internal */ +#define S_IMA 1024 /* Inode has an associated IMA struct */ +#define S_AUTOMOUNT 2048 /* Automount/referral quasi-directory */ +#define S_NOSEC 4096 /* no suid or xattr security attributes */ + +/* + * Note that nosuid etc flags are inode-specific: setting some file-system + * flags just means all the inodes inherit those flags by default. It might be + * possible to override it selectively if you really wanted to with some + * ioctl() that is not currently implemented. + * + * Exception: MS_RDONLY is always applied to the entire file system. + * + * Unfortunately, it is possible to change a filesystems flags with it mounted + * with files in use. This means that all of the inodes will not have their + * i_flags updated. Hence, i_flags no longer inherit the superblock mount + * flags, so these have to be checked separately. -- rmk@arm.uk.linux.org + */ +#define __IS_FLG(inode,flg) ((inode)->i_sb->s_flags & (flg)) + +#define IS_RDONLY(inode) ((inode)->i_sb->s_flags & MS_RDONLY) +#define IS_SYNC(inode) (__IS_FLG(inode, MS_SYNCHRONOUS) || \ + ((inode)->i_flags & S_SYNC)) +#define IS_DIRSYNC(inode) (__IS_FLG(inode, MS_SYNCHRONOUS|MS_DIRSYNC) || \ + ((inode)->i_flags & (S_SYNC|S_DIRSYNC))) +#define IS_MANDLOCK(inode) __IS_FLG(inode, MS_MANDLOCK) +#define IS_NOATIME(inode) __IS_FLG(inode, MS_RDONLY|MS_NOATIME) +#define IS_I_VERSION(inode) __IS_FLG(inode, MS_I_VERSION) + +#define IS_NOQUOTA(inode) ((inode)->i_flags & S_NOQUOTA) +#define IS_APPEND(inode) ((inode)->i_flags & S_APPEND) +#define IS_IMMUTABLE(inode) ((inode)->i_flags & S_IMMUTABLE) +#define IS_POSIXACL(inode) __IS_FLG(inode, MS_POSIXACL) + +#define IS_DEADDIR(inode) ((inode)->i_flags & S_DEAD) +#define IS_NOCMTIME(inode) ((inode)->i_flags & S_NOCMTIME) +#define IS_SWAPFILE(inode) ((inode)->i_flags & S_SWAPFILE) +#define IS_PRIVATE(inode) ((inode)->i_flags & S_PRIVATE) +#define IS_IMA(inode) ((inode)->i_flags & S_IMA) +#define IS_AUTOMOUNT(inode) ((inode)->i_flags & S_AUTOMOUNT) +#define IS_NOSEC(inode) ((inode)->i_flags & S_NOSEC) + +/* the read-only stuff doesn't really belong here, but any other place is + probably as bad and I don't want to create yet another include file. */ + +#define BLKROSET _IO(0x12,93) /* set device read-only (0 = read-write) */ +#define BLKROGET _IO(0x12,94) /* get read-only status (0 = read_write) */ +#define BLKRRPART _IO(0x12,95) /* re-read partition table */ +#define BLKGETSIZE _IO(0x12,96) /* return device size /512 (long *arg) */ +#define BLKFLSBUF _IO(0x12,97) /* flush buffer cache */ +#define BLKRASET _IO(0x12,98) /* set read ahead for block device */ +#define BLKRAGET _IO(0x12,99) /* get current read ahead setting */ +#define BLKFRASET _IO(0x12,100)/* set filesystem (mm/filemap.c) read-ahead */ +#define BLKFRAGET _IO(0x12,101)/* get filesystem (mm/filemap.c) read-ahead */ +#define BLKSECTSET _IO(0x12,102)/* set max sectors per request (ll_rw_blk.c) */ +#define BLKSECTGET _IO(0x12,103)/* get max sectors per request (ll_rw_blk.c) */ +#define BLKSSZGET _IO(0x12,104)/* get block device sector size */ +#if 0 +#define BLKPG _IO(0x12,105)/* See blkpg.h */ + +/* Some people are morons. Do not use sizeof! */ + +#define BLKELVGET _IOR(0x12,106,size_t)/* elevator get */ +#define BLKELVSET _IOW(0x12,107,size_t)/* elevator set */ +/* This was here just to show that the number is taken - + probably all these _IO(0x12,*) ioctls should be moved to blkpg.h. */ +#endif +/* A jump here: 108-111 have been used for various private purposes. */ +#define BLKBSZGET _IOR(0x12,112,size_t) +#define BLKBSZSET _IOW(0x12,113,size_t) +#define BLKGETSIZE64 _IOR(0x12,114,size_t) /* return device size in bytes (u64 *arg) */ +#define BLKTRACESETUP _IOWR(0x12,115,struct blk_user_trace_setup) +#define BLKTRACESTART _IO(0x12,116) +#define BLKTRACESTOP _IO(0x12,117) +#define BLKTRACETEARDOWN _IO(0x12,118) +#define BLKDISCARD _IO(0x12,119) +#define BLKIOMIN _IO(0x12,120) +#define BLKIOOPT _IO(0x12,121) +#define BLKALIGNOFF _IO(0x12,122) +#define BLKPBSZGET _IO(0x12,123) +#define BLKDISCARDZEROES _IO(0x12,124) +#define BLKSECDISCARD _IO(0x12,125) +#define BLKROTATIONAL _IO(0x12,126) +#define BLKZEROOUT _IO(0x12,127) + +#define BMAP_IOCTL 1 /* obsolete - kept for compatibility */ +#define FIBMAP _IO(0x00,1) /* bmap access */ +#define FIGETBSZ _IO(0x00,2) /* get the block size used for bmap */ +#define FIFREEZE _IOWR('X', 119, int) /* Freeze */ +#define FITHAW _IOWR('X', 120, int) /* Thaw */ +#define FITRIM _IOWR('X', 121, struct fstrim_range) /* Trim */ + +#define FS_IOC_GETFLAGS _IOR('f', 1, long) +#define FS_IOC_SETFLAGS _IOW('f', 2, long) +#define FS_IOC_GETVERSION _IOR('v', 1, long) +#define FS_IOC_SETVERSION _IOW('v', 2, long) +#define FS_IOC_FIEMAP _IOWR('f', 11, struct fiemap) +#define FS_IOC32_GETFLAGS _IOR('f', 1, int) +#define FS_IOC32_SETFLAGS _IOW('f', 2, int) +#define FS_IOC32_GETVERSION _IOR('v', 1, int) +#define FS_IOC32_SETVERSION _IOW('v', 2, int) + +/* + * Inode flags (FS_IOC_GETFLAGS / FS_IOC_SETFLAGS) + */ +#define FS_SECRM_FL 0x00000001 /* Secure deletion */ +#define FS_UNRM_FL 0x00000002 /* Undelete */ +#define FS_COMPR_FL 0x00000004 /* Compress file */ +#define FS_SYNC_FL 0x00000008 /* Synchronous updates */ +#define FS_IMMUTABLE_FL 0x00000010 /* Immutable file */ +#define FS_APPEND_FL 0x00000020 /* writes to file may only append */ +#define FS_NODUMP_FL 0x00000040 /* do not dump file */ +#define FS_NOATIME_FL 0x00000080 /* do not update atime */ +/* Reserved for compression usage... */ +#define FS_DIRTY_FL 0x00000100 +#define FS_COMPRBLK_FL 0x00000200 /* One or more compressed clusters */ +#define FS_NOCOMP_FL 0x00000400 /* Don't compress */ +#define FS_ECOMPR_FL 0x00000800 /* Compression error */ +/* End compression flags --- maybe not all used */ +#define FS_BTREE_FL 0x00001000 /* btree format dir */ +#define FS_INDEX_FL 0x00001000 /* hash-indexed directory */ +#define FS_IMAGIC_FL 0x00002000 /* AFS directory */ +#define FS_JOURNAL_DATA_FL 0x00004000 /* Reserved for ext3 */ +#define FS_NOTAIL_FL 0x00008000 /* file tail should not be merged */ +#define FS_DIRSYNC_FL 0x00010000 /* dirsync behaviour (directories only) */ +#define FS_TOPDIR_FL 0x00020000 /* Top of directory hierarchies*/ +#define FS_EXTENT_FL 0x00080000 /* Extents */ +#define FS_DIRECTIO_FL 0x00100000 /* Use direct i/o */ +#define FS_NOCOW_FL 0x00800000 /* Do not cow file */ +#define FS_RESERVED_FL 0x80000000 /* reserved for ext2 lib */ + +#define FS_FL_USER_VISIBLE 0x0003DFFF /* User visible flags */ +#define FS_FL_USER_MODIFIABLE 0x000380FF /* User modifiable flags */ + + +#define SYNC_FILE_RANGE_WAIT_BEFORE 1 +#define SYNC_FILE_RANGE_WRITE 2 +#define SYNC_FILE_RANGE_WAIT_AFTER 4 + +#endif /* _UAPI_LINUX_FS_H */ diff --git a/include/uapi/linux/fsl_hypervisor.h b/include/uapi/linux/fsl_hypervisor.h new file mode 100644 index 00000000000..1bf04967fec --- /dev/null +++ b/include/uapi/linux/fsl_hypervisor.h @@ -0,0 +1,220 @@ +/* + * Freescale hypervisor ioctl and kernel interface + * + * Copyright (C) 2008-2011 Freescale Semiconductor, Inc. + * Author: Timur Tabi <timur@freescale.com> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * This software is provided by Freescale Semiconductor "as is" and any + * express or implied warranties, including, but not limited to, the implied + * warranties of merchantability and fitness for a particular purpose are + * disclaimed. In no event shall Freescale Semiconductor be liable for any + * direct, indirect, incidental, special, exemplary, or consequential damages + * (including, but not limited to, procurement of substitute goods or services; + * loss of use, data, or profits; or business interruption) however caused and + * on any theory of liability, whether in contract, strict liability, or tort + * (including negligence or otherwise) arising in any way out of the use of this + * software, even if advised of the possibility of such damage. + * + * This file is used by the Freescale hypervisor management driver. It can + * also be included by applications that need to communicate with the driver + * via the ioctl interface. + */ + +#ifndef _UAPIFSL_HYPERVISOR_H +#define _UAPIFSL_HYPERVISOR_H + +#include <linux/types.h> + +/** + * struct fsl_hv_ioctl_restart - restart a partition + * @ret: return error code from the hypervisor + * @partition: the ID of the partition to restart, or -1 for the + * calling partition + * + * Used by FSL_HV_IOCTL_PARTITION_RESTART + */ +struct fsl_hv_ioctl_restart { + __u32 ret; + __u32 partition; +}; + +/** + * struct fsl_hv_ioctl_status - get a partition's status + * @ret: return error code from the hypervisor + * @partition: the ID of the partition to query, or -1 for the + * calling partition + * @status: The returned status of the partition + * + * Used by FSL_HV_IOCTL_PARTITION_GET_STATUS + * + * Values of 'status': + * 0 = Stopped + * 1 = Running + * 2 = Starting + * 3 = Stopping + */ +struct fsl_hv_ioctl_status { + __u32 ret; + __u32 partition; + __u32 status; +}; + +/** + * struct fsl_hv_ioctl_start - start a partition + * @ret: return error code from the hypervisor + * @partition: the ID of the partition to control + * @entry_point: The offset within the guest IMA to start execution + * @load: If non-zero, reload the partition's images before starting + * + * Used by FSL_HV_IOCTL_PARTITION_START + */ +struct fsl_hv_ioctl_start { + __u32 ret; + __u32 partition; + __u32 entry_point; + __u32 load; +}; + +/** + * struct fsl_hv_ioctl_stop - stop a partition + * @ret: return error code from the hypervisor + * @partition: the ID of the partition to stop, or -1 for the calling + * partition + * + * Used by FSL_HV_IOCTL_PARTITION_STOP + */ +struct fsl_hv_ioctl_stop { + __u32 ret; + __u32 partition; +}; + +/** + * struct fsl_hv_ioctl_memcpy - copy memory between partitions + * @ret: return error code from the hypervisor + * @source: the partition ID of the source partition, or -1 for this + * partition + * @target: the partition ID of the target partition, or -1 for this + * partition + * @reserved: reserved, must be set to 0 + * @local_addr: user-space virtual address of a buffer in the local + * partition + * @remote_addr: guest physical address of a buffer in the + * remote partition + * @count: the number of bytes to copy. Both the local and remote + * buffers must be at least 'count' bytes long + * + * Used by FSL_HV_IOCTL_MEMCPY + * + * The 'local' partition is the partition that calls this ioctl. The + * 'remote' partition is a different partition. The data is copied from + * the 'source' paritition' to the 'target' partition. + * + * The buffer in the remote partition must be guest physically + * contiguous. + * + * This ioctl does not support copying memory between two remote + * partitions or within the same partition, so either 'source' or + * 'target' (but not both) must be -1. In other words, either + * + * source == local and target == remote + * or + * source == remote and target == local + */ +struct fsl_hv_ioctl_memcpy { + __u32 ret; + __u32 source; + __u32 target; + __u32 reserved; /* padding to ensure local_vaddr is aligned */ + __u64 local_vaddr; + __u64 remote_paddr; + __u64 count; +}; + +/** + * struct fsl_hv_ioctl_doorbell - ring a doorbell + * @ret: return error code from the hypervisor + * @doorbell: the handle of the doorbell to ring doorbell + * + * Used by FSL_HV_IOCTL_DOORBELL + */ +struct fsl_hv_ioctl_doorbell { + __u32 ret; + __u32 doorbell; +}; + +/** + * struct fsl_hv_ioctl_prop - get/set a device tree property + * @ret: return error code from the hypervisor + * @handle: handle of partition whose tree to access + * @path: virtual address of path name of node to access + * @propname: virtual address of name of property to access + * @propval: virtual address of property data buffer + * @proplen: Size of property data buffer + * @reserved: reserved, must be set to 0 + * + * Used by FSL_HV_IOCTL_DOORBELL + */ +struct fsl_hv_ioctl_prop { + __u32 ret; + __u32 handle; + __u64 path; + __u64 propname; + __u64 propval; + __u32 proplen; + __u32 reserved; /* padding to ensure structure is aligned */ +}; + +/* The ioctl type, documented in ioctl-number.txt */ +#define FSL_HV_IOCTL_TYPE 0xAF + +/* Restart another partition */ +#define FSL_HV_IOCTL_PARTITION_RESTART \ + _IOWR(FSL_HV_IOCTL_TYPE, 1, struct fsl_hv_ioctl_restart) + +/* Get a partition's status */ +#define FSL_HV_IOCTL_PARTITION_GET_STATUS \ + _IOWR(FSL_HV_IOCTL_TYPE, 2, struct fsl_hv_ioctl_status) + +/* Boot another partition */ +#define FSL_HV_IOCTL_PARTITION_START \ + _IOWR(FSL_HV_IOCTL_TYPE, 3, struct fsl_hv_ioctl_start) + +/* Stop this or another partition */ +#define FSL_HV_IOCTL_PARTITION_STOP \ + _IOWR(FSL_HV_IOCTL_TYPE, 4, struct fsl_hv_ioctl_stop) + +/* Copy data from one partition to another */ +#define FSL_HV_IOCTL_MEMCPY \ + _IOWR(FSL_HV_IOCTL_TYPE, 5, struct fsl_hv_ioctl_memcpy) + +/* Ring a doorbell */ +#define FSL_HV_IOCTL_DOORBELL \ + _IOWR(FSL_HV_IOCTL_TYPE, 6, struct fsl_hv_ioctl_doorbell) + +/* Get a property from another guest's device tree */ +#define FSL_HV_IOCTL_GETPROP \ + _IOWR(FSL_HV_IOCTL_TYPE, 7, struct fsl_hv_ioctl_prop) + +/* Set a property in another guest's device tree */ +#define FSL_HV_IOCTL_SETPROP \ + _IOWR(FSL_HV_IOCTL_TYPE, 8, struct fsl_hv_ioctl_prop) + + +#endif /* _UAPIFSL_HYPERVISOR_H */ diff --git a/include/linux/fuse.h b/include/uapi/linux/fuse.h index d8c713e148e..d8c713e148e 100644 --- a/include/linux/fuse.h +++ b/include/uapi/linux/fuse.h diff --git a/include/uapi/linux/futex.h b/include/uapi/linux/futex.h new file mode 100644 index 00000000000..0b1f716373c --- /dev/null +++ b/include/uapi/linux/futex.h @@ -0,0 +1,152 @@ +#ifndef _UAPI_LINUX_FUTEX_H +#define _UAPI_LINUX_FUTEX_H + +#include <linux/compiler.h> +#include <linux/types.h> + +/* Second argument to futex syscall */ + + +#define FUTEX_WAIT 0 +#define FUTEX_WAKE 1 +#define FUTEX_FD 2 +#define FUTEX_REQUEUE 3 +#define FUTEX_CMP_REQUEUE 4 +#define FUTEX_WAKE_OP 5 +#define FUTEX_LOCK_PI 6 +#define FUTEX_UNLOCK_PI 7 +#define FUTEX_TRYLOCK_PI 8 +#define FUTEX_WAIT_BITSET 9 +#define FUTEX_WAKE_BITSET 10 +#define FUTEX_WAIT_REQUEUE_PI 11 +#define FUTEX_CMP_REQUEUE_PI 12 + +#define FUTEX_PRIVATE_FLAG 128 +#define FUTEX_CLOCK_REALTIME 256 +#define FUTEX_CMD_MASK ~(FUTEX_PRIVATE_FLAG | FUTEX_CLOCK_REALTIME) + +#define FUTEX_WAIT_PRIVATE (FUTEX_WAIT | FUTEX_PRIVATE_FLAG) +#define FUTEX_WAKE_PRIVATE (FUTEX_WAKE | FUTEX_PRIVATE_FLAG) +#define FUTEX_REQUEUE_PRIVATE (FUTEX_REQUEUE | FUTEX_PRIVATE_FLAG) +#define FUTEX_CMP_REQUEUE_PRIVATE (FUTEX_CMP_REQUEUE | FUTEX_PRIVATE_FLAG) +#define FUTEX_WAKE_OP_PRIVATE (FUTEX_WAKE_OP | FUTEX_PRIVATE_FLAG) +#define FUTEX_LOCK_PI_PRIVATE (FUTEX_LOCK_PI | FUTEX_PRIVATE_FLAG) +#define FUTEX_UNLOCK_PI_PRIVATE (FUTEX_UNLOCK_PI | FUTEX_PRIVATE_FLAG) +#define FUTEX_TRYLOCK_PI_PRIVATE (FUTEX_TRYLOCK_PI | FUTEX_PRIVATE_FLAG) +#define FUTEX_WAIT_BITSET_PRIVATE (FUTEX_WAIT_BITSET | FUTEX_PRIVATE_FLAG) +#define FUTEX_WAKE_BITSET_PRIVATE (FUTEX_WAKE_BITSET | FUTEX_PRIVATE_FLAG) +#define FUTEX_WAIT_REQUEUE_PI_PRIVATE (FUTEX_WAIT_REQUEUE_PI | \ + FUTEX_PRIVATE_FLAG) +#define FUTEX_CMP_REQUEUE_PI_PRIVATE (FUTEX_CMP_REQUEUE_PI | \ + FUTEX_PRIVATE_FLAG) + +/* + * Support for robust futexes: the kernel cleans up held futexes at + * thread exit time. + */ + +/* + * Per-lock list entry - embedded in user-space locks, somewhere close + * to the futex field. (Note: user-space uses a double-linked list to + * achieve O(1) list add and remove, but the kernel only needs to know + * about the forward link) + * + * NOTE: this structure is part of the syscall ABI, and must not be + * changed. + */ +struct robust_list { + struct robust_list __user *next; +}; + +/* + * Per-thread list head: + * + * NOTE: this structure is part of the syscall ABI, and must only be + * changed if the change is first communicated with the glibc folks. + * (When an incompatible change is done, we'll increase the structure + * size, which glibc will detect) + */ +struct robust_list_head { + /* + * The head of the list. Points back to itself if empty: + */ + struct robust_list list; + + /* + * This relative offset is set by user-space, it gives the kernel + * the relative position of the futex field to examine. This way + * we keep userspace flexible, to freely shape its data-structure, + * without hardcoding any particular offset into the kernel: + */ + long futex_offset; + + /* + * The death of the thread may race with userspace setting + * up a lock's links. So to handle this race, userspace first + * sets this field to the address of the to-be-taken lock, + * then does the lock acquire, and then adds itself to the + * list, and then clears this field. Hence the kernel will + * always have full knowledge of all locks that the thread + * _might_ have taken. We check the owner TID in any case, + * so only truly owned locks will be handled. + */ + struct robust_list __user *list_op_pending; +}; + +/* + * Are there any waiters for this robust futex: + */ +#define FUTEX_WAITERS 0x80000000 + +/* + * The kernel signals via this bit that a thread holding a futex + * has exited without unlocking the futex. The kernel also does + * a FUTEX_WAKE on such futexes, after setting the bit, to wake + * up any possible waiters: + */ +#define FUTEX_OWNER_DIED 0x40000000 + +/* + * The rest of the robust-futex field is for the TID: + */ +#define FUTEX_TID_MASK 0x3fffffff + +/* + * This limit protects against a deliberately circular list. + * (Not worth introducing an rlimit for it) + */ +#define ROBUST_LIST_LIMIT 2048 + +/* + * bitset with all bits set for the FUTEX_xxx_BITSET OPs to request a + * match of any bit. + */ +#define FUTEX_BITSET_MATCH_ANY 0xffffffff + + +#define FUTEX_OP_SET 0 /* *(int *)UADDR2 = OPARG; */ +#define FUTEX_OP_ADD 1 /* *(int *)UADDR2 += OPARG; */ +#define FUTEX_OP_OR 2 /* *(int *)UADDR2 |= OPARG; */ +#define FUTEX_OP_ANDN 3 /* *(int *)UADDR2 &= ~OPARG; */ +#define FUTEX_OP_XOR 4 /* *(int *)UADDR2 ^= OPARG; */ + +#define FUTEX_OP_OPARG_SHIFT 8 /* Use (1 << OPARG) instead of OPARG. */ + +#define FUTEX_OP_CMP_EQ 0 /* if (oldval == CMPARG) wake */ +#define FUTEX_OP_CMP_NE 1 /* if (oldval != CMPARG) wake */ +#define FUTEX_OP_CMP_LT 2 /* if (oldval < CMPARG) wake */ +#define FUTEX_OP_CMP_LE 3 /* if (oldval <= CMPARG) wake */ +#define FUTEX_OP_CMP_GT 4 /* if (oldval > CMPARG) wake */ +#define FUTEX_OP_CMP_GE 5 /* if (oldval >= CMPARG) wake */ + +/* FUTEX_WAKE_OP will perform atomically + int oldval = *(int *)UADDR2; + *(int *)UADDR2 = oldval OP OPARG; + if (oldval CMP CMPARG) + wake UADDR2; */ + +#define FUTEX_OP(op, oparg, cmp, cmparg) \ + (((op & 0xf) << 28) | ((cmp & 0xf) << 24) \ + | ((oparg & 0xfff) << 12) | (cmparg & 0xfff)) + +#endif /* _UAPI_LINUX_FUTEX_H */ diff --git a/include/uapi/linux/gameport.h b/include/uapi/linux/gameport.h new file mode 100644 index 00000000000..49b29b068f4 --- /dev/null +++ b/include/uapi/linux/gameport.h @@ -0,0 +1,28 @@ +/* + * Copyright (c) 1999-2002 Vojtech Pavlik + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#ifndef _UAPI_GAMEPORT_H +#define _UAPI_GAMEPORT_H + + + +#define GAMEPORT_MODE_DISABLED 0 +#define GAMEPORT_MODE_RAW 1 +#define GAMEPORT_MODE_COOKED 2 + +#define GAMEPORT_ID_VENDOR_ANALOG 0x0001 +#define GAMEPORT_ID_VENDOR_MADCATZ 0x0002 +#define GAMEPORT_ID_VENDOR_LOGITECH 0x0003 +#define GAMEPORT_ID_VENDOR_CREATIVE 0x0004 +#define GAMEPORT_ID_VENDOR_GENIUS 0x0005 +#define GAMEPORT_ID_VENDOR_INTERACT 0x0006 +#define GAMEPORT_ID_VENDOR_MICROSOFT 0x0007 +#define GAMEPORT_ID_VENDOR_THRUSTMASTER 0x0008 +#define GAMEPORT_ID_VENDOR_GRAVIS 0x0009 +#define GAMEPORT_ID_VENDOR_GUILLEMOT 0x000a + +#endif /* _UAPI_GAMEPORT_H */ diff --git a/include/linux/gen_stats.h b/include/uapi/linux/gen_stats.h index 552c8a0a12d..552c8a0a12d 100644 --- a/include/linux/gen_stats.h +++ b/include/uapi/linux/gen_stats.h diff --git a/include/uapi/linux/genetlink.h b/include/uapi/linux/genetlink.h new file mode 100644 index 00000000000..c880a417d8a --- /dev/null +++ b/include/uapi/linux/genetlink.h @@ -0,0 +1,84 @@ +#ifndef _UAPI__LINUX_GENERIC_NETLINK_H +#define _UAPI__LINUX_GENERIC_NETLINK_H + +#include <linux/types.h> +#include <linux/netlink.h> + +#define GENL_NAMSIZ 16 /* length of family name */ + +#define GENL_MIN_ID NLMSG_MIN_TYPE +#define GENL_MAX_ID 1023 + +struct genlmsghdr { + __u8 cmd; + __u8 version; + __u16 reserved; +}; + +#define GENL_HDRLEN NLMSG_ALIGN(sizeof(struct genlmsghdr)) + +#define GENL_ADMIN_PERM 0x01 +#define GENL_CMD_CAP_DO 0x02 +#define GENL_CMD_CAP_DUMP 0x04 +#define GENL_CMD_CAP_HASPOL 0x08 + +/* + * List of reserved static generic netlink identifiers: + */ +#define GENL_ID_GENERATE 0 +#define GENL_ID_CTRL NLMSG_MIN_TYPE + +/************************************************************************** + * Controller + **************************************************************************/ + +enum { + CTRL_CMD_UNSPEC, + CTRL_CMD_NEWFAMILY, + CTRL_CMD_DELFAMILY, + CTRL_CMD_GETFAMILY, + CTRL_CMD_NEWOPS, + CTRL_CMD_DELOPS, + CTRL_CMD_GETOPS, + CTRL_CMD_NEWMCAST_GRP, + CTRL_CMD_DELMCAST_GRP, + CTRL_CMD_GETMCAST_GRP, /* unused */ + __CTRL_CMD_MAX, +}; + +#define CTRL_CMD_MAX (__CTRL_CMD_MAX - 1) + +enum { + CTRL_ATTR_UNSPEC, + CTRL_ATTR_FAMILY_ID, + CTRL_ATTR_FAMILY_NAME, + CTRL_ATTR_VERSION, + CTRL_ATTR_HDRSIZE, + CTRL_ATTR_MAXATTR, + CTRL_ATTR_OPS, + CTRL_ATTR_MCAST_GROUPS, + __CTRL_ATTR_MAX, +}; + +#define CTRL_ATTR_MAX (__CTRL_ATTR_MAX - 1) + +enum { + CTRL_ATTR_OP_UNSPEC, + CTRL_ATTR_OP_ID, + CTRL_ATTR_OP_FLAGS, + __CTRL_ATTR_OP_MAX, +}; + +#define CTRL_ATTR_OP_MAX (__CTRL_ATTR_OP_MAX - 1) + +enum { + CTRL_ATTR_MCAST_GRP_UNSPEC, + CTRL_ATTR_MCAST_GRP_NAME, + CTRL_ATTR_MCAST_GRP_ID, + __CTRL_ATTR_MCAST_GRP_MAX, +}; + +#define CTRL_ATTR_MCAST_GRP_MAX (__CTRL_ATTR_MCAST_GRP_MAX - 1) + + +#endif /* _UAPI__LINUX_GENERIC_NETLINK_H */ diff --git a/include/linux/gfs2_ondisk.h b/include/uapi/linux/gfs2_ondisk.h index b2de1f9a88d..b2de1f9a88d 100644 --- a/include/linux/gfs2_ondisk.h +++ b/include/uapi/linux/gfs2_ondisk.h diff --git a/include/linux/gigaset_dev.h b/include/uapi/linux/gigaset_dev.h index 258ba82937e..258ba82937e 100644 --- a/include/linux/gigaset_dev.h +++ b/include/uapi/linux/gigaset_dev.h diff --git a/include/uapi/linux/hdlc.h b/include/uapi/linux/hdlc.h new file mode 100644 index 00000000000..2c5f0aff4cf --- /dev/null +++ b/include/uapi/linux/hdlc.h @@ -0,0 +1,23 @@ +/* + * Generic HDLC support routines for Linux + * + * Copyright (C) 1999-2005 Krzysztof Halasa <khc@pm.waw.pl> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License + * as published by the Free Software Foundation. + */ + +#ifndef _UAPI__HDLC_H +#define _UAPI__HDLC_H + + +#define HDLC_MAX_MTU 1500 /* Ethernet 1500 bytes */ +#if 0 +#define HDLC_MAX_MRU (HDLC_MAX_MTU + 10 + 14 + 4) /* for ETH+VLAN over FR */ +#else +#define HDLC_MAX_MRU 1600 /* as required for FR network */ +#endif + + +#endif /* _UAPI__HDLC_H */ diff --git a/include/uapi/linux/hdlcdrv.h b/include/uapi/linux/hdlcdrv.h new file mode 100644 index 00000000000..ffc79c0b44a --- /dev/null +++ b/include/uapi/linux/hdlcdrv.h @@ -0,0 +1,110 @@ +/* + * hdlcdrv.h -- HDLC packet radio network driver. + * The Linux soundcard driver for 1200 baud and 9600 baud packet radio + * (C) 1996-1998 by Thomas Sailer, HB9JNX/AE4WA + */ + +#ifndef _UAPI_HDLCDRV_H +#define _UAPI_HDLCDRV_H + +/* -------------------------------------------------------------------- */ +/* + * structs for the IOCTL commands + */ + +struct hdlcdrv_params { + int iobase; + int irq; + int dma; + int dma2; + int seriobase; + int pariobase; + int midiiobase; +}; + +struct hdlcdrv_channel_params { + int tx_delay; /* the transmitter keyup delay in 10ms units */ + int tx_tail; /* the transmitter keyoff delay in 10ms units */ + int slottime; /* the slottime in 10ms; usually 10 = 100ms */ + int ppersist; /* the p-persistence 0..255 */ + int fulldup; /* some driver do not support full duplex, setting */ + /* this just makes them send even if DCD is on */ +}; + +struct hdlcdrv_old_channel_state { + int ptt; + int dcd; + int ptt_keyed; +}; + +struct hdlcdrv_channel_state { + int ptt; + int dcd; + int ptt_keyed; + unsigned long tx_packets; + unsigned long tx_errors; + unsigned long rx_packets; + unsigned long rx_errors; +}; + +struct hdlcdrv_ioctl { + int cmd; + union { + struct hdlcdrv_params mp; + struct hdlcdrv_channel_params cp; + struct hdlcdrv_channel_state cs; + struct hdlcdrv_old_channel_state ocs; + unsigned int calibrate; + unsigned char bits; + char modename[128]; + char drivername[32]; + } data; +}; + +/* -------------------------------------------------------------------- */ + +/* + * ioctl values + */ +#define HDLCDRVCTL_GETMODEMPAR 0 +#define HDLCDRVCTL_SETMODEMPAR 1 +#define HDLCDRVCTL_MODEMPARMASK 2 /* not handled by hdlcdrv */ +#define HDLCDRVCTL_GETCHANNELPAR 10 +#define HDLCDRVCTL_SETCHANNELPAR 11 +#define HDLCDRVCTL_OLDGETSTAT 20 +#define HDLCDRVCTL_CALIBRATE 21 +#define HDLCDRVCTL_GETSTAT 22 + +/* + * these are mainly for debugging purposes + */ +#define HDLCDRVCTL_GETSAMPLES 30 +#define HDLCDRVCTL_GETBITS 31 + +/* + * not handled by hdlcdrv, but by its depending drivers + */ +#define HDLCDRVCTL_GETMODE 40 +#define HDLCDRVCTL_SETMODE 41 +#define HDLCDRVCTL_MODELIST 42 +#define HDLCDRVCTL_DRIVERNAME 43 + +/* + * mask of needed modem parameters, returned by HDLCDRVCTL_MODEMPARMASK + */ +#define HDLCDRV_PARMASK_IOBASE (1<<0) +#define HDLCDRV_PARMASK_IRQ (1<<1) +#define HDLCDRV_PARMASK_DMA (1<<2) +#define HDLCDRV_PARMASK_DMA2 (1<<3) +#define HDLCDRV_PARMASK_SERIOBASE (1<<4) +#define HDLCDRV_PARMASK_PARIOBASE (1<<5) +#define HDLCDRV_PARMASK_MIDIIOBASE (1<<6) + +/* -------------------------------------------------------------------- */ + + +/* -------------------------------------------------------------------- */ + +#endif /* _UAPI_HDLCDRV_H */ + +/* -------------------------------------------------------------------- */ diff --git a/include/linux/hdreg.h b/include/uapi/linux/hdreg.h index 29ee2873f4a..29ee2873f4a 100644 --- a/include/linux/hdreg.h +++ b/include/uapi/linux/hdreg.h diff --git a/include/uapi/linux/hid.h b/include/uapi/linux/hid.h new file mode 100644 index 00000000000..b60f4842bd9 --- /dev/null +++ b/include/uapi/linux/hid.h @@ -0,0 +1,66 @@ +/* + * Copyright (c) 1999 Andreas Gal + * Copyright (c) 2000-2001 Vojtech Pavlik + * Copyright (c) 2006-2007 Jiri Kosina + */ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Should you need to contact me, the author, you can do so either by + * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail: + * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic + */ +#ifndef _UAPI__HID_H +#define _UAPI__HID_H + + + +/* + * USB HID (Human Interface Device) interface class code + */ + +#define USB_INTERFACE_CLASS_HID 3 + +/* + * USB HID interface subclass and protocol codes + */ + +#define USB_INTERFACE_SUBCLASS_BOOT 1 +#define USB_INTERFACE_PROTOCOL_KEYBOARD 1 +#define USB_INTERFACE_PROTOCOL_MOUSE 2 + +/* + * HID class requests + */ + +#define HID_REQ_GET_REPORT 0x01 +#define HID_REQ_GET_IDLE 0x02 +#define HID_REQ_GET_PROTOCOL 0x03 +#define HID_REQ_SET_REPORT 0x09 +#define HID_REQ_SET_IDLE 0x0A +#define HID_REQ_SET_PROTOCOL 0x0B + +/* + * HID class descriptor types + */ + +#define HID_DT_HID (USB_TYPE_CLASS | 0x01) +#define HID_DT_REPORT (USB_TYPE_CLASS | 0x02) +#define HID_DT_PHYSICAL (USB_TYPE_CLASS | 0x03) + +#define HID_MAX_DESCRIPTOR_SIZE 4096 + + +#endif /* _UAPI__HID_H */ diff --git a/include/uapi/linux/hiddev.h b/include/uapi/linux/hiddev.h new file mode 100644 index 00000000000..7df7884bf5c --- /dev/null +++ b/include/uapi/linux/hiddev.h @@ -0,0 +1,212 @@ +/* + * Copyright (c) 1999-2000 Vojtech Pavlik + * + * Sponsored by SuSE + */ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Should you need to contact me, the author, you can do so either by + * e-mail - mail your message to <vojtech@suse.cz>, or by paper mail: + * Vojtech Pavlik, Ucitelska 1576, Prague 8, 182 00 Czech Republic + */ +#ifndef _UAPI_HIDDEV_H +#define _UAPI_HIDDEV_H + + + +#include <linux/types.h> + +/* + * The event structure itself + */ + +struct hiddev_event { + unsigned hid; + signed int value; +}; + +struct hiddev_devinfo { + __u32 bustype; + __u32 busnum; + __u32 devnum; + __u32 ifnum; + __s16 vendor; + __s16 product; + __s16 version; + __u32 num_applications; +}; + +struct hiddev_collection_info { + __u32 index; + __u32 type; + __u32 usage; + __u32 level; +}; + +#define HID_STRING_SIZE 256 +struct hiddev_string_descriptor { + __s32 index; + char value[HID_STRING_SIZE]; +}; + +struct hiddev_report_info { + __u32 report_type; + __u32 report_id; + __u32 num_fields; +}; + +/* To do a GUSAGE/SUSAGE, fill in at least usage_code, report_type and + * report_id. Set report_id to REPORT_ID_UNKNOWN if the rest of the fields + * are unknown. Otherwise use a usage_ref struct filled in from a previous + * successful GUSAGE call to save time. To actually send a value to the + * device, perform a SUSAGE first, followed by a SREPORT. An INITREPORT or a + * GREPORT isn't necessary for a GUSAGE to return valid data. + */ +#define HID_REPORT_ID_UNKNOWN 0xffffffff +#define HID_REPORT_ID_FIRST 0x00000100 +#define HID_REPORT_ID_NEXT 0x00000200 +#define HID_REPORT_ID_MASK 0x000000ff +#define HID_REPORT_ID_MAX 0x000000ff + +#define HID_REPORT_TYPE_INPUT 1 +#define HID_REPORT_TYPE_OUTPUT 2 +#define HID_REPORT_TYPE_FEATURE 3 +#define HID_REPORT_TYPE_MIN 1 +#define HID_REPORT_TYPE_MAX 3 + +struct hiddev_field_info { + __u32 report_type; + __u32 report_id; + __u32 field_index; + __u32 maxusage; + __u32 flags; + __u32 physical; /* physical usage for this field */ + __u32 logical; /* logical usage for this field */ + __u32 application; /* application usage for this field */ + __s32 logical_minimum; + __s32 logical_maximum; + __s32 physical_minimum; + __s32 physical_maximum; + __u32 unit_exponent; + __u32 unit; +}; + +/* Fill in report_type, report_id and field_index to get the information on a + * field. + */ +#define HID_FIELD_CONSTANT 0x001 +#define HID_FIELD_VARIABLE 0x002 +#define HID_FIELD_RELATIVE 0x004 +#define HID_FIELD_WRAP 0x008 +#define HID_FIELD_NONLINEAR 0x010 +#define HID_FIELD_NO_PREFERRED 0x020 +#define HID_FIELD_NULL_STATE 0x040 +#define HID_FIELD_VOLATILE 0x080 +#define HID_FIELD_BUFFERED_BYTE 0x100 + +struct hiddev_usage_ref { + __u32 report_type; + __u32 report_id; + __u32 field_index; + __u32 usage_index; + __u32 usage_code; + __s32 value; +}; + +/* hiddev_usage_ref_multi is used for sending multiple bytes to a control. + * It really manifests itself as setting the value of consecutive usages */ +#define HID_MAX_MULTI_USAGES 1024 +struct hiddev_usage_ref_multi { + struct hiddev_usage_ref uref; + __u32 num_values; + __s32 values[HID_MAX_MULTI_USAGES]; +}; + +/* FIELD_INDEX_NONE is returned in read() data from the kernel when flags + * is set to (HIDDEV_FLAG_UREF | HIDDEV_FLAG_REPORT) and a new report has + * been sent by the device + */ +#define HID_FIELD_INDEX_NONE 0xffffffff + +/* + * Protocol version. + */ + +#define HID_VERSION 0x010004 + +/* + * IOCTLs (0x00 - 0x7f) + */ + +#define HIDIOCGVERSION _IOR('H', 0x01, int) +#define HIDIOCAPPLICATION _IO('H', 0x02) +#define HIDIOCGDEVINFO _IOR('H', 0x03, struct hiddev_devinfo) +#define HIDIOCGSTRING _IOR('H', 0x04, struct hiddev_string_descriptor) +#define HIDIOCINITREPORT _IO('H', 0x05) +#define HIDIOCGNAME(len) _IOC(_IOC_READ, 'H', 0x06, len) +#define HIDIOCGREPORT _IOW('H', 0x07, struct hiddev_report_info) +#define HIDIOCSREPORT _IOW('H', 0x08, struct hiddev_report_info) +#define HIDIOCGREPORTINFO _IOWR('H', 0x09, struct hiddev_report_info) +#define HIDIOCGFIELDINFO _IOWR('H', 0x0A, struct hiddev_field_info) +#define HIDIOCGUSAGE _IOWR('H', 0x0B, struct hiddev_usage_ref) +#define HIDIOCSUSAGE _IOW('H', 0x0C, struct hiddev_usage_ref) +#define HIDIOCGUCODE _IOWR('H', 0x0D, struct hiddev_usage_ref) +#define HIDIOCGFLAG _IOR('H', 0x0E, int) +#define HIDIOCSFLAG _IOW('H', 0x0F, int) +#define HIDIOCGCOLLECTIONINDEX _IOW('H', 0x10, struct hiddev_usage_ref) +#define HIDIOCGCOLLECTIONINFO _IOWR('H', 0x11, struct hiddev_collection_info) +#define HIDIOCGPHYS(len) _IOC(_IOC_READ, 'H', 0x12, len) + +/* For writing/reading to multiple/consecutive usages */ +#define HIDIOCGUSAGES _IOWR('H', 0x13, struct hiddev_usage_ref_multi) +#define HIDIOCSUSAGES _IOW('H', 0x14, struct hiddev_usage_ref_multi) + +/* + * Flags to be used in HIDIOCSFLAG + */ +#define HIDDEV_FLAG_UREF 0x1 +#define HIDDEV_FLAG_REPORT 0x2 +#define HIDDEV_FLAGS 0x3 + +/* To traverse the input report descriptor info for a HID device, perform the + * following: + * + * rinfo.report_type = HID_REPORT_TYPE_INPUT; + * rinfo.report_id = HID_REPORT_ID_FIRST; + * ret = ioctl(fd, HIDIOCGREPORTINFO, &rinfo); + * + * while (ret >= 0) { + * for (i = 0; i < rinfo.num_fields; i++) { + * finfo.report_type = rinfo.report_type; + * finfo.report_id = rinfo.report_id; + * finfo.field_index = i; + * ioctl(fd, HIDIOCGFIELDINFO, &finfo); + * for (j = 0; j < finfo.maxusage; j++) { + * uref.report_type = rinfo.report_type; + * uref.report_id = rinfo.report_id; + * uref.field_index = i; + * uref.usage_index = j; + * ioctl(fd, HIDIOCGUCODE, &uref); + * ioctl(fd, HIDIOCGUSAGE, &uref); + * } + * } + * rinfo.report_id |= HID_REPORT_ID_NEXT; + * ret = ioctl(fd, HIDIOCGREPORTINFO, &rinfo); + * } + */ + + +#endif /* _UAPI_HIDDEV_H */ diff --git a/include/uapi/linux/hidraw.h b/include/uapi/linux/hidraw.h new file mode 100644 index 00000000000..f5b732979a7 --- /dev/null +++ b/include/uapi/linux/hidraw.h @@ -0,0 +1,50 @@ +/* + * Copyright (c) 2007 Jiri Kosina + */ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + */ +#ifndef _UAPI_HIDRAW_H +#define _UAPI_HIDRAW_H + + + +#include <linux/hid.h> +#include <linux/types.h> + +struct hidraw_report_descriptor { + __u32 size; + __u8 value[HID_MAX_DESCRIPTOR_SIZE]; +}; + +struct hidraw_devinfo { + __u32 bustype; + __s16 vendor; + __s16 product; +}; + +/* ioctl interface */ +#define HIDIOCGRDESCSIZE _IOR('H', 0x01, int) +#define HIDIOCGRDESC _IOR('H', 0x02, struct hidraw_report_descriptor) +#define HIDIOCGRAWINFO _IOR('H', 0x03, struct hidraw_devinfo) +#define HIDIOCGRAWNAME(len) _IOC(_IOC_READ, 'H', 0x04, len) +#define HIDIOCGRAWPHYS(len) _IOC(_IOC_READ, 'H', 0x05, len) +/* The first byte of SFEATURE and GFEATURE is the report number */ +#define HIDIOCSFEATURE(len) _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x06, len) +#define HIDIOCGFEATURE(len) _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x07, len) + +#define HIDRAW_FIRST_MINOR 0 +#define HIDRAW_MAX_DEVICES 64 +/* number of reports to buffer */ +#define HIDRAW_BUFFER_SIZE 64 + + +/* kernel-only API declarations */ + +#endif /* _UAPI_HIDRAW_H */ diff --git a/include/uapi/linux/hpet.h b/include/uapi/linux/hpet.h new file mode 100644 index 00000000000..8af3c70abc8 --- /dev/null +++ b/include/uapi/linux/hpet.h @@ -0,0 +1,25 @@ +#ifndef _UAPI__HPET__ +#define _UAPI__HPET__ + +#include <linux/compiler.h> + + +struct hpet_info { + unsigned long hi_ireqfreq; /* Hz */ + unsigned long hi_flags; /* information */ + unsigned short hi_hpet; + unsigned short hi_timer; +}; + +#define HPET_INFO_PERIODIC 0x0010 /* periodic-capable comparator */ + +#define HPET_IE_ON _IO('h', 0x01) /* interrupt on */ +#define HPET_IE_OFF _IO('h', 0x02) /* interrupt off */ +#define HPET_INFO _IOR('h', 0x03, struct hpet_info) +#define HPET_EPI _IO('h', 0x04) /* enable periodic */ +#define HPET_DPI _IO('h', 0x05) /* disable periodic */ +#define HPET_IRQFREQ _IOW('h', 0x6, unsigned long) /* IRQFREQ usec */ + +#define MAX_HPET_TBS 8 /* maximum hpet timer blocks */ + +#endif /* _UAPI__HPET__ */ diff --git a/include/linux/hysdn_if.h b/include/uapi/linux/hysdn_if.h index 00236ae3b04..00236ae3b04 100644 --- a/include/linux/hysdn_if.h +++ b/include/uapi/linux/hysdn_if.h diff --git a/include/uapi/linux/i2c-dev.h b/include/uapi/linux/i2c-dev.h new file mode 100644 index 00000000000..3f311551795 --- /dev/null +++ b/include/uapi/linux/i2c-dev.h @@ -0,0 +1,72 @@ +/* + i2c-dev.h - i2c-bus driver, char device interface + + Copyright (C) 1995-97 Simon G. Vogl + Copyright (C) 1998-99 Frodo Looijaard <frodol@dds.nl> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + MA 02110-1301 USA. +*/ + +#ifndef _UAPI_LINUX_I2C_DEV_H +#define _UAPI_LINUX_I2C_DEV_H + +#include <linux/types.h> +#include <linux/compiler.h> + +/* /dev/i2c-X ioctl commands. The ioctl's parameter is always an + * unsigned long, except for: + * - I2C_FUNCS, takes pointer to an unsigned long + * - I2C_RDWR, takes pointer to struct i2c_rdwr_ioctl_data + * - I2C_SMBUS, takes pointer to struct i2c_smbus_ioctl_data + */ +#define I2C_RETRIES 0x0701 /* number of times a device address should + be polled when not acknowledging */ +#define I2C_TIMEOUT 0x0702 /* set timeout in units of 10 ms */ + +/* NOTE: Slave address is 7 or 10 bits, but 10-bit addresses + * are NOT supported! (due to code brokenness) + */ +#define I2C_SLAVE 0x0703 /* Use this slave address */ +#define I2C_SLAVE_FORCE 0x0706 /* Use this slave address, even if it + is already in use by a driver! */ +#define I2C_TENBIT 0x0704 /* 0 for 7 bit addrs, != 0 for 10 bit */ + +#define I2C_FUNCS 0x0705 /* Get the adapter functionality mask */ + +#define I2C_RDWR 0x0707 /* Combined R/W transfer (one STOP only) */ + +#define I2C_PEC 0x0708 /* != 0 to use PEC with SMBus */ +#define I2C_SMBUS 0x0720 /* SMBus transfer */ + + +/* This is the structure as used in the I2C_SMBUS ioctl call */ +struct i2c_smbus_ioctl_data { + __u8 read_write; + __u8 command; + __u32 size; + union i2c_smbus_data __user *data; +}; + +/* This is the structure as used in the I2C_RDWR ioctl call */ +struct i2c_rdwr_ioctl_data { + struct i2c_msg __user *msgs; /* pointers to i2c_msgs */ + __u32 nmsgs; /* number of i2c_msgs */ +}; + +#define I2C_RDRW_IOCTL_MAX_MSGS 42 + + +#endif /* _UAPI_LINUX_I2C_DEV_H */ diff --git a/include/uapi/linux/i2c.h b/include/uapi/linux/i2c.h new file mode 100644 index 00000000000..0e949cbfd33 --- /dev/null +++ b/include/uapi/linux/i2c.h @@ -0,0 +1,151 @@ +/* ------------------------------------------------------------------------- */ +/* */ +/* i2c.h - definitions for the i2c-bus interface */ +/* */ +/* ------------------------------------------------------------------------- */ +/* Copyright (C) 1995-2000 Simon G. Vogl + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + MA 02110-1301 USA. */ +/* ------------------------------------------------------------------------- */ + +/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and + Frodo Looijaard <frodol@dds.nl> */ + +#ifndef _UAPI_LINUX_I2C_H +#define _UAPI_LINUX_I2C_H + +#include <linux/types.h> + +/** + * struct i2c_msg - an I2C transaction segment beginning with START + * @addr: Slave address, either seven or ten bits. When this is a ten + * bit address, I2C_M_TEN must be set in @flags and the adapter + * must support I2C_FUNC_10BIT_ADDR. + * @flags: I2C_M_RD is handled by all adapters. No other flags may be + * provided unless the adapter exported the relevant I2C_FUNC_* + * flags through i2c_check_functionality(). + * @len: Number of data bytes in @buf being read from or written to the + * I2C slave address. For read transactions where I2C_M_RECV_LEN + * is set, the caller guarantees that this buffer can hold up to + * 32 bytes in addition to the initial length byte sent by the + * slave (plus, if used, the SMBus PEC); and this value will be + * incremented by the number of block data bytes received. + * @buf: The buffer into which data is read, or from which it's written. + * + * An i2c_msg is the low level representation of one segment of an I2C + * transaction. It is visible to drivers in the @i2c_transfer() procedure, + * to userspace from i2c-dev, and to I2C adapter drivers through the + * @i2c_adapter.@master_xfer() method. + * + * Except when I2C "protocol mangling" is used, all I2C adapters implement + * the standard rules for I2C transactions. Each transaction begins with a + * START. That is followed by the slave address, and a bit encoding read + * versus write. Then follow all the data bytes, possibly including a byte + * with SMBus PEC. The transfer terminates with a NAK, or when all those + * bytes have been transferred and ACKed. If this is the last message in a + * group, it is followed by a STOP. Otherwise it is followed by the next + * @i2c_msg transaction segment, beginning with a (repeated) START. + * + * Alternatively, when the adapter supports I2C_FUNC_PROTOCOL_MANGLING then + * passing certain @flags may have changed those standard protocol behaviors. + * Those flags are only for use with broken/nonconforming slaves, and with + * adapters which are known to support the specific mangling options they + * need (one or more of IGNORE_NAK, NO_RD_ACK, NOSTART, and REV_DIR_ADDR). + */ +struct i2c_msg { + __u16 addr; /* slave address */ + __u16 flags; +#define I2C_M_TEN 0x0010 /* this is a ten bit chip address */ +#define I2C_M_RD 0x0001 /* read data, from slave to master */ +#define I2C_M_STOP 0x8000 /* if I2C_FUNC_PROTOCOL_MANGLING */ +#define I2C_M_NOSTART 0x4000 /* if I2C_FUNC_NOSTART */ +#define I2C_M_REV_DIR_ADDR 0x2000 /* if I2C_FUNC_PROTOCOL_MANGLING */ +#define I2C_M_IGNORE_NAK 0x1000 /* if I2C_FUNC_PROTOCOL_MANGLING */ +#define I2C_M_NO_RD_ACK 0x0800 /* if I2C_FUNC_PROTOCOL_MANGLING */ +#define I2C_M_RECV_LEN 0x0400 /* length will be first received byte */ + __u16 len; /* msg length */ + __u8 *buf; /* pointer to msg data */ +}; + +/* To determine what functionality is present */ + +#define I2C_FUNC_I2C 0x00000001 +#define I2C_FUNC_10BIT_ADDR 0x00000002 +#define I2C_FUNC_PROTOCOL_MANGLING 0x00000004 /* I2C_M_IGNORE_NAK etc. */ +#define I2C_FUNC_SMBUS_PEC 0x00000008 +#define I2C_FUNC_NOSTART 0x00000010 /* I2C_M_NOSTART */ +#define I2C_FUNC_SMBUS_BLOCK_PROC_CALL 0x00008000 /* SMBus 2.0 */ +#define I2C_FUNC_SMBUS_QUICK 0x00010000 +#define I2C_FUNC_SMBUS_READ_BYTE 0x00020000 +#define I2C_FUNC_SMBUS_WRITE_BYTE 0x00040000 +#define I2C_FUNC_SMBUS_READ_BYTE_DATA 0x00080000 +#define I2C_FUNC_SMBUS_WRITE_BYTE_DATA 0x00100000 +#define I2C_FUNC_SMBUS_READ_WORD_DATA 0x00200000 +#define I2C_FUNC_SMBUS_WRITE_WORD_DATA 0x00400000 +#define I2C_FUNC_SMBUS_PROC_CALL 0x00800000 +#define I2C_FUNC_SMBUS_READ_BLOCK_DATA 0x01000000 +#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000 +#define I2C_FUNC_SMBUS_READ_I2C_BLOCK 0x04000000 /* I2C-like block xfer */ +#define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK 0x08000000 /* w/ 1-byte reg. addr. */ + +#define I2C_FUNC_SMBUS_BYTE (I2C_FUNC_SMBUS_READ_BYTE | \ + I2C_FUNC_SMBUS_WRITE_BYTE) +#define I2C_FUNC_SMBUS_BYTE_DATA (I2C_FUNC_SMBUS_READ_BYTE_DATA | \ + I2C_FUNC_SMBUS_WRITE_BYTE_DATA) +#define I2C_FUNC_SMBUS_WORD_DATA (I2C_FUNC_SMBUS_READ_WORD_DATA | \ + I2C_FUNC_SMBUS_WRITE_WORD_DATA) +#define I2C_FUNC_SMBUS_BLOCK_DATA (I2C_FUNC_SMBUS_READ_BLOCK_DATA | \ + I2C_FUNC_SMBUS_WRITE_BLOCK_DATA) +#define I2C_FUNC_SMBUS_I2C_BLOCK (I2C_FUNC_SMBUS_READ_I2C_BLOCK | \ + I2C_FUNC_SMBUS_WRITE_I2C_BLOCK) + +#define I2C_FUNC_SMBUS_EMUL (I2C_FUNC_SMBUS_QUICK | \ + I2C_FUNC_SMBUS_BYTE | \ + I2C_FUNC_SMBUS_BYTE_DATA | \ + I2C_FUNC_SMBUS_WORD_DATA | \ + I2C_FUNC_SMBUS_PROC_CALL | \ + I2C_FUNC_SMBUS_WRITE_BLOCK_DATA | \ + I2C_FUNC_SMBUS_I2C_BLOCK | \ + I2C_FUNC_SMBUS_PEC) + +/* + * Data for SMBus Messages + */ +#define I2C_SMBUS_BLOCK_MAX 32 /* As specified in SMBus standard */ +union i2c_smbus_data { + __u8 byte; + __u16 word; + __u8 block[I2C_SMBUS_BLOCK_MAX + 2]; /* block[0] is used for length */ + /* and one more for user-space compatibility */ +}; + +/* i2c_smbus_xfer read or write markers */ +#define I2C_SMBUS_READ 1 +#define I2C_SMBUS_WRITE 0 + +/* SMBus transaction types (size parameter in the above functions) + Note: these no longer correspond to the (arbitrary) PIIX4 internal codes! */ +#define I2C_SMBUS_QUICK 0 +#define I2C_SMBUS_BYTE 1 +#define I2C_SMBUS_BYTE_DATA 2 +#define I2C_SMBUS_WORD_DATA 3 +#define I2C_SMBUS_PROC_CALL 4 +#define I2C_SMBUS_BLOCK_DATA 5 +#define I2C_SMBUS_I2C_BLOCK_BROKEN 6 +#define I2C_SMBUS_BLOCK_PROC_CALL 7 /* SMBus 2.0 */ +#define I2C_SMBUS_I2C_BLOCK_DATA 8 + +#endif /* _UAPI_LINUX_I2C_H */ diff --git a/include/linux/i2o-dev.h b/include/uapi/linux/i2o-dev.h index a8093bfec3a..a8093bfec3a 100644 --- a/include/linux/i2o-dev.h +++ b/include/uapi/linux/i2o-dev.h diff --git a/include/linux/i8k.h b/include/uapi/linux/i8k.h index 1c45ba50511..1c45ba50511 100644 --- a/include/linux/i8k.h +++ b/include/uapi/linux/i8k.h diff --git a/include/uapi/linux/icmp.h b/include/uapi/linux/icmp.h new file mode 100644 index 00000000000..16fff055f73 --- /dev/null +++ b/include/uapi/linux/icmp.h @@ -0,0 +1,97 @@ +/* + * INET An implementation of the TCP/IP protocol suite for the LINUX + * operating system. INET is implemented using the BSD Socket + * interface as the means of communication with the user level. + * + * Definitions for the ICMP protocol. + * + * Version: @(#)icmp.h 1.0.3 04/28/93 + * + * Author: Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _UAPI_LINUX_ICMP_H +#define _UAPI_LINUX_ICMP_H + +#include <linux/types.h> + +#define ICMP_ECHOREPLY 0 /* Echo Reply */ +#define ICMP_DEST_UNREACH 3 /* Destination Unreachable */ +#define ICMP_SOURCE_QUENCH 4 /* Source Quench */ +#define ICMP_REDIRECT 5 /* Redirect (change route) */ +#define ICMP_ECHO 8 /* Echo Request */ +#define ICMP_TIME_EXCEEDED 11 /* Time Exceeded */ +#define ICMP_PARAMETERPROB 12 /* Parameter Problem */ +#define ICMP_TIMESTAMP 13 /* Timestamp Request */ +#define ICMP_TIMESTAMPREPLY 14 /* Timestamp Reply */ +#define ICMP_INFO_REQUEST 15 /* Information Request */ +#define ICMP_INFO_REPLY 16 /* Information Reply */ +#define ICMP_ADDRESS 17 /* Address Mask Request */ +#define ICMP_ADDRESSREPLY 18 /* Address Mask Reply */ +#define NR_ICMP_TYPES 18 + + +/* Codes for UNREACH. */ +#define ICMP_NET_UNREACH 0 /* Network Unreachable */ +#define ICMP_HOST_UNREACH 1 /* Host Unreachable */ +#define ICMP_PROT_UNREACH 2 /* Protocol Unreachable */ +#define ICMP_PORT_UNREACH 3 /* Port Unreachable */ +#define ICMP_FRAG_NEEDED 4 /* Fragmentation Needed/DF set */ +#define ICMP_SR_FAILED 5 /* Source Route failed */ +#define ICMP_NET_UNKNOWN 6 +#define ICMP_HOST_UNKNOWN 7 +#define ICMP_HOST_ISOLATED 8 +#define ICMP_NET_ANO 9 +#define ICMP_HOST_ANO 10 +#define ICMP_NET_UNR_TOS 11 +#define ICMP_HOST_UNR_TOS 12 +#define ICMP_PKT_FILTERED 13 /* Packet filtered */ +#define ICMP_PREC_VIOLATION 14 /* Precedence violation */ +#define ICMP_PREC_CUTOFF 15 /* Precedence cut off */ +#define NR_ICMP_UNREACH 15 /* instead of hardcoding immediate value */ + +/* Codes for REDIRECT. */ +#define ICMP_REDIR_NET 0 /* Redirect Net */ +#define ICMP_REDIR_HOST 1 /* Redirect Host */ +#define ICMP_REDIR_NETTOS 2 /* Redirect Net for TOS */ +#define ICMP_REDIR_HOSTTOS 3 /* Redirect Host for TOS */ + +/* Codes for TIME_EXCEEDED. */ +#define ICMP_EXC_TTL 0 /* TTL count exceeded */ +#define ICMP_EXC_FRAGTIME 1 /* Fragment Reass time exceeded */ + + +struct icmphdr { + __u8 type; + __u8 code; + __sum16 checksum; + union { + struct { + __be16 id; + __be16 sequence; + } echo; + __be32 gateway; + struct { + __be16 __unused; + __be16 mtu; + } frag; + } un; +}; + + +/* + * constants for (set|get)sockopt + */ + +#define ICMP_FILTER 1 + +struct icmp_filter { + __u32 data; +}; + + +#endif /* _UAPI_LINUX_ICMP_H */ diff --git a/include/uapi/linux/icmpv6.h b/include/uapi/linux/icmpv6.h new file mode 100644 index 00000000000..e0133c73c30 --- /dev/null +++ b/include/uapi/linux/icmpv6.h @@ -0,0 +1,164 @@ +#ifndef _UAPI_LINUX_ICMPV6_H +#define _UAPI_LINUX_ICMPV6_H + +#include <linux/types.h> +#include <asm/byteorder.h> + +struct icmp6hdr { + + __u8 icmp6_type; + __u8 icmp6_code; + __sum16 icmp6_cksum; + + + union { + __be32 un_data32[1]; + __be16 un_data16[2]; + __u8 un_data8[4]; + + struct icmpv6_echo { + __be16 identifier; + __be16 sequence; + } u_echo; + + struct icmpv6_nd_advt { +#if defined(__LITTLE_ENDIAN_BITFIELD) + __u32 reserved:5, + override:1, + solicited:1, + router:1, + reserved2:24; +#elif defined(__BIG_ENDIAN_BITFIELD) + __u32 router:1, + solicited:1, + override:1, + reserved:29; +#else +#error "Please fix <asm/byteorder.h>" +#endif + } u_nd_advt; + + struct icmpv6_nd_ra { + __u8 hop_limit; +#if defined(__LITTLE_ENDIAN_BITFIELD) + __u8 reserved:3, + router_pref:2, + home_agent:1, + other:1, + managed:1; + +#elif defined(__BIG_ENDIAN_BITFIELD) + __u8 managed:1, + other:1, + home_agent:1, + router_pref:2, + reserved:3; +#else +#error "Please fix <asm/byteorder.h>" +#endif + __be16 rt_lifetime; + } u_nd_ra; + + } icmp6_dataun; + +#define icmp6_identifier icmp6_dataun.u_echo.identifier +#define icmp6_sequence icmp6_dataun.u_echo.sequence +#define icmp6_pointer icmp6_dataun.un_data32[0] +#define icmp6_mtu icmp6_dataun.un_data32[0] +#define icmp6_unused icmp6_dataun.un_data32[0] +#define icmp6_maxdelay icmp6_dataun.un_data16[0] +#define icmp6_router icmp6_dataun.u_nd_advt.router +#define icmp6_solicited icmp6_dataun.u_nd_advt.solicited +#define icmp6_override icmp6_dataun.u_nd_advt.override +#define icmp6_ndiscreserved icmp6_dataun.u_nd_advt.reserved +#define icmp6_hop_limit icmp6_dataun.u_nd_ra.hop_limit +#define icmp6_addrconf_managed icmp6_dataun.u_nd_ra.managed +#define icmp6_addrconf_other icmp6_dataun.u_nd_ra.other +#define icmp6_rt_lifetime icmp6_dataun.u_nd_ra.rt_lifetime +#define icmp6_router_pref icmp6_dataun.u_nd_ra.router_pref +}; + + +#define ICMPV6_ROUTER_PREF_LOW 0x3 +#define ICMPV6_ROUTER_PREF_MEDIUM 0x0 +#define ICMPV6_ROUTER_PREF_HIGH 0x1 +#define ICMPV6_ROUTER_PREF_INVALID 0x2 + +#define ICMPV6_DEST_UNREACH 1 +#define ICMPV6_PKT_TOOBIG 2 +#define ICMPV6_TIME_EXCEED 3 +#define ICMPV6_PARAMPROB 4 + +#define ICMPV6_INFOMSG_MASK 0x80 + +#define ICMPV6_ECHO_REQUEST 128 +#define ICMPV6_ECHO_REPLY 129 +#define ICMPV6_MGM_QUERY 130 +#define ICMPV6_MGM_REPORT 131 +#define ICMPV6_MGM_REDUCTION 132 + +#define ICMPV6_NI_QUERY 139 +#define ICMPV6_NI_REPLY 140 + +#define ICMPV6_MLD2_REPORT 143 + +#define ICMPV6_DHAAD_REQUEST 144 +#define ICMPV6_DHAAD_REPLY 145 +#define ICMPV6_MOBILE_PREFIX_SOL 146 +#define ICMPV6_MOBILE_PREFIX_ADV 147 + +/* + * Codes for Destination Unreachable + */ +#define ICMPV6_NOROUTE 0 +#define ICMPV6_ADM_PROHIBITED 1 +#define ICMPV6_NOT_NEIGHBOUR 2 +#define ICMPV6_ADDR_UNREACH 3 +#define ICMPV6_PORT_UNREACH 4 + +/* + * Codes for Time Exceeded + */ +#define ICMPV6_EXC_HOPLIMIT 0 +#define ICMPV6_EXC_FRAGTIME 1 + +/* + * Codes for Parameter Problem + */ +#define ICMPV6_HDR_FIELD 0 +#define ICMPV6_UNK_NEXTHDR 1 +#define ICMPV6_UNK_OPTION 2 + +/* + * constants for (set|get)sockopt + */ + +#define ICMPV6_FILTER 1 + +/* + * ICMPV6 filter + */ + +#define ICMPV6_FILTER_BLOCK 1 +#define ICMPV6_FILTER_PASS 2 +#define ICMPV6_FILTER_BLOCKOTHERS 3 +#define ICMPV6_FILTER_PASSONLY 4 + +struct icmp6_filter { + __u32 data[8]; +}; + +/* + * Definitions for MLDv2 + */ +#define MLD2_MODE_IS_INCLUDE 1 +#define MLD2_MODE_IS_EXCLUDE 2 +#define MLD2_CHANGE_TO_INCLUDE 3 +#define MLD2_CHANGE_TO_EXCLUDE 4 +#define MLD2_ALLOW_NEW_SOURCES 5 +#define MLD2_BLOCK_OLD_SOURCES 6 + +#define MLD2_ALL_MCR_INIT { { { 0xff,0x02,0,0,0,0,0,0,0,0,0,0,0,0,0,0x16 } } } + + +#endif /* _UAPI_LINUX_ICMPV6_H */ diff --git a/include/linux/if.h b/include/uapi/linux/if.h index 1ec407b01e4..1ec407b01e4 100644 --- a/include/linux/if.h +++ b/include/uapi/linux/if.h diff --git a/include/linux/if_addr.h b/include/uapi/linux/if_addr.h index 23357ab81a7..23357ab81a7 100644 --- a/include/linux/if_addr.h +++ b/include/uapi/linux/if_addr.h diff --git a/include/linux/if_addrlabel.h b/include/uapi/linux/if_addrlabel.h index 54580c29818..54580c29818 100644 --- a/include/linux/if_addrlabel.h +++ b/include/uapi/linux/if_addrlabel.h diff --git a/include/linux/if_alg.h b/include/uapi/linux/if_alg.h index 0f9acce5b1f..0f9acce5b1f 100644 --- a/include/linux/if_alg.h +++ b/include/uapi/linux/if_alg.h diff --git a/include/linux/if_arcnet.h b/include/uapi/linux/if_arcnet.h index 46e34bd0e78..46e34bd0e78 100644 --- a/include/linux/if_arcnet.h +++ b/include/uapi/linux/if_arcnet.h diff --git a/include/uapi/linux/if_arp.h b/include/uapi/linux/if_arp.h new file mode 100644 index 00000000000..82c7d1bdade --- /dev/null +++ b/include/uapi/linux/if_arp.h @@ -0,0 +1,159 @@ +/* + * INET An implementation of the TCP/IP protocol suite for the LINUX + * operating system. INET is implemented using the BSD Socket + * interface as the means of communication with the user level. + * + * Global definitions for the ARP (RFC 826) protocol. + * + * Version: @(#)if_arp.h 1.0.1 04/16/93 + * + * Authors: Original taken from Berkeley UNIX 4.3, (c) UCB 1986-1988 + * Portions taken from the KA9Q/NOS (v2.00m PA0GRI) source. + * Ross Biro + * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG> + * Florian La Roche, + * Jonathan Layes <layes@loran.com> + * Arnaldo Carvalho de Melo <acme@conectiva.com.br> ARPHRD_HWX25 + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _UAPI_LINUX_IF_ARP_H +#define _UAPI_LINUX_IF_ARP_H + +#include <linux/netdevice.h> + +/* ARP protocol HARDWARE identifiers. */ +#define ARPHRD_NETROM 0 /* from KA9Q: NET/ROM pseudo */ +#define ARPHRD_ETHER 1 /* Ethernet 10Mbps */ +#define ARPHRD_EETHER 2 /* Experimental Ethernet */ +#define ARPHRD_AX25 3 /* AX.25 Level 2 */ +#define ARPHRD_PRONET 4 /* PROnet token ring */ +#define ARPHRD_CHAOS 5 /* Chaosnet */ +#define ARPHRD_IEEE802 6 /* IEEE 802.2 Ethernet/TR/TB */ +#define ARPHRD_ARCNET 7 /* ARCnet */ +#define ARPHRD_APPLETLK 8 /* APPLEtalk */ +#define ARPHRD_DLCI 15 /* Frame Relay DLCI */ +#define ARPHRD_ATM 19 /* ATM */ +#define ARPHRD_METRICOM 23 /* Metricom STRIP (new IANA id) */ +#define ARPHRD_IEEE1394 24 /* IEEE 1394 IPv4 - RFC 2734 */ +#define ARPHRD_EUI64 27 /* EUI-64 */ +#define ARPHRD_INFINIBAND 32 /* InfiniBand */ + +/* Dummy types for non ARP hardware */ +#define ARPHRD_SLIP 256 +#define ARPHRD_CSLIP 257 +#define ARPHRD_SLIP6 258 +#define ARPHRD_CSLIP6 259 +#define ARPHRD_RSRVD 260 /* Notional KISS type */ +#define ARPHRD_ADAPT 264 +#define ARPHRD_ROSE 270 +#define ARPHRD_X25 271 /* CCITT X.25 */ +#define ARPHRD_HWX25 272 /* Boards with X.25 in firmware */ +#define ARPHRD_CAN 280 /* Controller Area Network */ +#define ARPHRD_PPP 512 +#define ARPHRD_CISCO 513 /* Cisco HDLC */ +#define ARPHRD_HDLC ARPHRD_CISCO +#define ARPHRD_LAPB 516 /* LAPB */ +#define ARPHRD_DDCMP 517 /* Digital's DDCMP protocol */ +#define ARPHRD_RAWHDLC 518 /* Raw HDLC */ + +#define ARPHRD_TUNNEL 768 /* IPIP tunnel */ +#define ARPHRD_TUNNEL6 769 /* IP6IP6 tunnel */ +#define ARPHRD_FRAD 770 /* Frame Relay Access Device */ +#define ARPHRD_SKIP 771 /* SKIP vif */ +#define ARPHRD_LOOPBACK 772 /* Loopback device */ +#define ARPHRD_LOCALTLK 773 /* Localtalk device */ +#define ARPHRD_FDDI 774 /* Fiber Distributed Data Interface */ +#define ARPHRD_BIF 775 /* AP1000 BIF */ +#define ARPHRD_SIT 776 /* sit0 device - IPv6-in-IPv4 */ +#define ARPHRD_IPDDP 777 /* IP over DDP tunneller */ +#define ARPHRD_IPGRE 778 /* GRE over IP */ +#define ARPHRD_PIMREG 779 /* PIMSM register interface */ +#define ARPHRD_HIPPI 780 /* High Performance Parallel Interface */ +#define ARPHRD_ASH 781 /* Nexus 64Mbps Ash */ +#define ARPHRD_ECONET 782 /* Acorn Econet */ +#define ARPHRD_IRDA 783 /* Linux-IrDA */ +/* ARP works differently on different FC media .. so */ +#define ARPHRD_FCPP 784 /* Point to point fibrechannel */ +#define ARPHRD_FCAL 785 /* Fibrechannel arbitrated loop */ +#define ARPHRD_FCPL 786 /* Fibrechannel public loop */ +#define ARPHRD_FCFABRIC 787 /* Fibrechannel fabric */ + /* 787->799 reserved for fibrechannel media types */ +#define ARPHRD_IEEE802_TR 800 /* Magic type ident for TR */ +#define ARPHRD_IEEE80211 801 /* IEEE 802.11 */ +#define ARPHRD_IEEE80211_PRISM 802 /* IEEE 802.11 + Prism2 header */ +#define ARPHRD_IEEE80211_RADIOTAP 803 /* IEEE 802.11 + radiotap header */ +#define ARPHRD_IEEE802154 804 +#define ARPHRD_IEEE802154_MONITOR 805 /* IEEE 802.15.4 network monitor */ + +#define ARPHRD_PHONET 820 /* PhoNet media type */ +#define ARPHRD_PHONET_PIPE 821 /* PhoNet pipe header */ +#define ARPHRD_CAIF 822 /* CAIF media type */ +#define ARPHRD_IP6GRE 823 /* GRE over IPv6 */ + +#define ARPHRD_VOID 0xFFFF /* Void type, nothing is known */ +#define ARPHRD_NONE 0xFFFE /* zero header length */ + +/* ARP protocol opcodes. */ +#define ARPOP_REQUEST 1 /* ARP request */ +#define ARPOP_REPLY 2 /* ARP reply */ +#define ARPOP_RREQUEST 3 /* RARP request */ +#define ARPOP_RREPLY 4 /* RARP reply */ +#define ARPOP_InREQUEST 8 /* InARP request */ +#define ARPOP_InREPLY 9 /* InARP reply */ +#define ARPOP_NAK 10 /* (ATM)ARP NAK */ + + +/* ARP ioctl request. */ +struct arpreq { + struct sockaddr arp_pa; /* protocol address */ + struct sockaddr arp_ha; /* hardware address */ + int arp_flags; /* flags */ + struct sockaddr arp_netmask; /* netmask (only for proxy arps) */ + char arp_dev[16]; +}; + +struct arpreq_old { + struct sockaddr arp_pa; /* protocol address */ + struct sockaddr arp_ha; /* hardware address */ + int arp_flags; /* flags */ + struct sockaddr arp_netmask; /* netmask (only for proxy arps) */ +}; + +/* ARP Flag values. */ +#define ATF_COM 0x02 /* completed entry (ha valid) */ +#define ATF_PERM 0x04 /* permanent entry */ +#define ATF_PUBL 0x08 /* publish entry */ +#define ATF_USETRAILERS 0x10 /* has requested trailers */ +#define ATF_NETMASK 0x20 /* want to use a netmask (only + for proxy entries) */ +#define ATF_DONTPUB 0x40 /* don't answer this addresses */ + +/* + * This structure defines an ethernet arp header. + */ + +struct arphdr { + __be16 ar_hrd; /* format of hardware address */ + __be16 ar_pro; /* format of protocol address */ + unsigned char ar_hln; /* length of hardware address */ + unsigned char ar_pln; /* length of protocol address */ + __be16 ar_op; /* ARP opcode (command) */ + +#if 0 + /* + * Ethernet looks like this : This bit is variable sized however... + */ + unsigned char ar_sha[ETH_ALEN]; /* sender hardware address */ + unsigned char ar_sip[4]; /* sender IP address */ + unsigned char ar_tha[ETH_ALEN]; /* target hardware address */ + unsigned char ar_tip[4]; /* target IP address */ +#endif + +}; + + +#endif /* _UAPI_LINUX_IF_ARP_H */ diff --git a/include/linux/if_bonding.h b/include/uapi/linux/if_bonding.h index a17edda8a78..a17edda8a78 100644 --- a/include/linux/if_bonding.h +++ b/include/uapi/linux/if_bonding.h diff --git a/include/uapi/linux/if_bridge.h b/include/uapi/linux/if_bridge.h new file mode 100644 index 00000000000..a8fe9549ddb --- /dev/null +++ b/include/uapi/linux/if_bridge.h @@ -0,0 +1,101 @@ +/* + * Linux ethernet bridge + * + * Authors: + * Lennert Buytenhek <buytenh@gnu.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _UAPI_LINUX_IF_BRIDGE_H +#define _UAPI_LINUX_IF_BRIDGE_H + +#include <linux/types.h> + +#define SYSFS_BRIDGE_ATTR "bridge" +#define SYSFS_BRIDGE_FDB "brforward" +#define SYSFS_BRIDGE_PORT_SUBDIR "brif" +#define SYSFS_BRIDGE_PORT_ATTR "brport" +#define SYSFS_BRIDGE_PORT_LINK "bridge" + +#define BRCTL_VERSION 1 + +#define BRCTL_GET_VERSION 0 +#define BRCTL_GET_BRIDGES 1 +#define BRCTL_ADD_BRIDGE 2 +#define BRCTL_DEL_BRIDGE 3 +#define BRCTL_ADD_IF 4 +#define BRCTL_DEL_IF 5 +#define BRCTL_GET_BRIDGE_INFO 6 +#define BRCTL_GET_PORT_LIST 7 +#define BRCTL_SET_BRIDGE_FORWARD_DELAY 8 +#define BRCTL_SET_BRIDGE_HELLO_TIME 9 +#define BRCTL_SET_BRIDGE_MAX_AGE 10 +#define BRCTL_SET_AGEING_TIME 11 +#define BRCTL_SET_GC_INTERVAL 12 +#define BRCTL_GET_PORT_INFO 13 +#define BRCTL_SET_BRIDGE_STP_STATE 14 +#define BRCTL_SET_BRIDGE_PRIORITY 15 +#define BRCTL_SET_PORT_PRIORITY 16 +#define BRCTL_SET_PATH_COST 17 +#define BRCTL_GET_FDB_ENTRIES 18 + +#define BR_STATE_DISABLED 0 +#define BR_STATE_LISTENING 1 +#define BR_STATE_LEARNING 2 +#define BR_STATE_FORWARDING 3 +#define BR_STATE_BLOCKING 4 + +struct __bridge_info { + __u64 designated_root; + __u64 bridge_id; + __u32 root_path_cost; + __u32 max_age; + __u32 hello_time; + __u32 forward_delay; + __u32 bridge_max_age; + __u32 bridge_hello_time; + __u32 bridge_forward_delay; + __u8 topology_change; + __u8 topology_change_detected; + __u8 root_port; + __u8 stp_enabled; + __u32 ageing_time; + __u32 gc_interval; + __u32 hello_timer_value; + __u32 tcn_timer_value; + __u32 topology_change_timer_value; + __u32 gc_timer_value; +}; + +struct __port_info { + __u64 designated_root; + __u64 designated_bridge; + __u16 port_id; + __u16 designated_port; + __u32 path_cost; + __u32 designated_cost; + __u8 state; + __u8 top_change_ack; + __u8 config_pending; + __u8 unused0; + __u32 message_age_timer_value; + __u32 forward_delay_timer_value; + __u32 hold_timer_value; +}; + +struct __fdb_entry { + __u8 mac_addr[6]; + __u8 port_no; + __u8 is_local; + __u32 ageing_timer_value; + __u8 port_hi; + __u8 pad0; + __u16 unused; +}; + + +#endif /* _UAPI_LINUX_IF_BRIDGE_H */ diff --git a/include/linux/if_cablemodem.h b/include/uapi/linux/if_cablemodem.h index 9ca1007edd9..9ca1007edd9 100644 --- a/include/linux/if_cablemodem.h +++ b/include/uapi/linux/if_cablemodem.h diff --git a/include/uapi/linux/if_eql.h b/include/uapi/linux/if_eql.h new file mode 100644 index 00000000000..06e818c9e7c --- /dev/null +++ b/include/uapi/linux/if_eql.h @@ -0,0 +1,54 @@ +/* + * Equalizer Load-balancer for serial network interfaces. + * + * (c) Copyright 1995 Simon "Guru Aleph-Null" Janes + * NCM: Network and Communications Management, Inc. + * + * + * This software may be used and distributed according to the terms + * of the GNU General Public License, incorporated herein by reference. + * + * The author may be reached as simon@ncm.com, or C/O + * NCM + * Attn: Simon Janes + * 6803 Whittier Ave + * McLean VA 22101 + * Phone: 1-703-847-0040 ext 103 + */ + +#ifndef _UAPI_LINUX_IF_EQL_H +#define _UAPI_LINUX_IF_EQL_H + +#define EQL_DEFAULT_SLAVE_PRIORITY 28800 +#define EQL_DEFAULT_MAX_SLAVES 4 +#define EQL_DEFAULT_MTU 576 +#define EQL_DEFAULT_RESCHED_IVAL HZ + +#define EQL_ENSLAVE (SIOCDEVPRIVATE) +#define EQL_EMANCIPATE (SIOCDEVPRIVATE + 1) + +#define EQL_GETSLAVECFG (SIOCDEVPRIVATE + 2) +#define EQL_SETSLAVECFG (SIOCDEVPRIVATE + 3) + +#define EQL_GETMASTRCFG (SIOCDEVPRIVATE + 4) +#define EQL_SETMASTRCFG (SIOCDEVPRIVATE + 5) + + +typedef struct master_config { + char master_name[16]; + int max_slaves; + int min_slaves; +} master_config_t; + +typedef struct slave_config { + char slave_name[16]; + long priority; +} slave_config_t; + +typedef struct slaving_request { + char slave_name[16]; + long priority; +} slaving_request_t; + + +#endif /* _UAPI_LINUX_IF_EQL_H */ diff --git a/include/uapi/linux/if_ether.h b/include/uapi/linux/if_ether.h new file mode 100644 index 00000000000..0343e1f0582 --- /dev/null +++ b/include/uapi/linux/if_ether.h @@ -0,0 +1,135 @@ +/* + * INET An implementation of the TCP/IP protocol suite for the LINUX + * operating system. INET is implemented using the BSD Socket + * interface as the means of communication with the user level. + * + * Global definitions for the Ethernet IEEE 802.3 interface. + * + * Version: @(#)if_ether.h 1.0.1a 02/08/94 + * + * Author: Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG> + * Donald Becker, <becker@super.org> + * Alan Cox, <alan@lxorguk.ukuu.org.uk> + * Steve Whitehouse, <gw7rrm@eeshack3.swan.ac.uk> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _UAPI_LINUX_IF_ETHER_H +#define _UAPI_LINUX_IF_ETHER_H + +#include <linux/types.h> + +/* + * IEEE 802.3 Ethernet magic constants. The frame sizes omit the preamble + * and FCS/CRC (frame check sequence). + */ + +#define ETH_ALEN 6 /* Octets in one ethernet addr */ +#define ETH_HLEN 14 /* Total octets in header. */ +#define ETH_ZLEN 60 /* Min. octets in frame sans FCS */ +#define ETH_DATA_LEN 1500 /* Max. octets in payload */ +#define ETH_FRAME_LEN 1514 /* Max. octets in frame sans FCS */ +#define ETH_FCS_LEN 4 /* Octets in the FCS */ + +/* + * These are the defined Ethernet Protocol ID's. + */ + +#define ETH_P_LOOP 0x0060 /* Ethernet Loopback packet */ +#define ETH_P_PUP 0x0200 /* Xerox PUP packet */ +#define ETH_P_PUPAT 0x0201 /* Xerox PUP Addr Trans packet */ +#define ETH_P_IP 0x0800 /* Internet Protocol packet */ +#define ETH_P_X25 0x0805 /* CCITT X.25 */ +#define ETH_P_ARP 0x0806 /* Address Resolution packet */ +#define ETH_P_BPQ 0x08FF /* G8BPQ AX.25 Ethernet Packet [ NOT AN OFFICIALLY REGISTERED ID ] */ +#define ETH_P_IEEEPUP 0x0a00 /* Xerox IEEE802.3 PUP packet */ +#define ETH_P_IEEEPUPAT 0x0a01 /* Xerox IEEE802.3 PUP Addr Trans packet */ +#define ETH_P_DEC 0x6000 /* DEC Assigned proto */ +#define ETH_P_DNA_DL 0x6001 /* DEC DNA Dump/Load */ +#define ETH_P_DNA_RC 0x6002 /* DEC DNA Remote Console */ +#define ETH_P_DNA_RT 0x6003 /* DEC DNA Routing */ +#define ETH_P_LAT 0x6004 /* DEC LAT */ +#define ETH_P_DIAG 0x6005 /* DEC Diagnostics */ +#define ETH_P_CUST 0x6006 /* DEC Customer use */ +#define ETH_P_SCA 0x6007 /* DEC Systems Comms Arch */ +#define ETH_P_TEB 0x6558 /* Trans Ether Bridging */ +#define ETH_P_RARP 0x8035 /* Reverse Addr Res packet */ +#define ETH_P_ATALK 0x809B /* Appletalk DDP */ +#define ETH_P_AARP 0x80F3 /* Appletalk AARP */ +#define ETH_P_8021Q 0x8100 /* 802.1Q VLAN Extended Header */ +#define ETH_P_IPX 0x8137 /* IPX over DIX */ +#define ETH_P_IPV6 0x86DD /* IPv6 over bluebook */ +#define ETH_P_PAUSE 0x8808 /* IEEE Pause frames. See 802.3 31B */ +#define ETH_P_SLOW 0x8809 /* Slow Protocol. See 802.3ad 43B */ +#define ETH_P_WCCP 0x883E /* Web-cache coordination protocol + * defined in draft-wilson-wrec-wccp-v2-00.txt */ +#define ETH_P_PPP_DISC 0x8863 /* PPPoE discovery messages */ +#define ETH_P_PPP_SES 0x8864 /* PPPoE session messages */ +#define ETH_P_MPLS_UC 0x8847 /* MPLS Unicast traffic */ +#define ETH_P_MPLS_MC 0x8848 /* MPLS Multicast traffic */ +#define ETH_P_ATMMPOA 0x884c /* MultiProtocol Over ATM */ +#define ETH_P_LINK_CTL 0x886c /* HPNA, wlan link local tunnel */ +#define ETH_P_ATMFATE 0x8884 /* Frame-based ATM Transport + * over Ethernet + */ +#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */ +#define ETH_P_AOE 0x88A2 /* ATA over Ethernet */ +#define ETH_P_8021AD 0x88A8 /* 802.1ad Service VLAN */ +#define ETH_P_802_EX1 0x88B5 /* 802.1 Local Experimental 1. */ +#define ETH_P_TIPC 0x88CA /* TIPC */ +#define ETH_P_8021AH 0x88E7 /* 802.1ah Backbone Service Tag */ +#define ETH_P_1588 0x88F7 /* IEEE 1588 Timesync */ +#define ETH_P_FCOE 0x8906 /* Fibre Channel over Ethernet */ +#define ETH_P_TDLS 0x890D /* TDLS */ +#define ETH_P_FIP 0x8914 /* FCoE Initialization Protocol */ +#define ETH_P_QINQ1 0x9100 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */ +#define ETH_P_QINQ2 0x9200 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */ +#define ETH_P_QINQ3 0x9300 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */ +#define ETH_P_EDSA 0xDADA /* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */ +#define ETH_P_AF_IUCV 0xFBFB /* IBM af_iucv [ NOT AN OFFICIALLY REGISTERED ID ] */ + +/* + * Non DIX types. Won't clash for 1500 types. + */ + +#define ETH_P_802_3 0x0001 /* Dummy type for 802.3 frames */ +#define ETH_P_AX25 0x0002 /* Dummy protocol id for AX.25 */ +#define ETH_P_ALL 0x0003 /* Every packet (be careful!!!) */ +#define ETH_P_802_2 0x0004 /* 802.2 frames */ +#define ETH_P_SNAP 0x0005 /* Internal only */ +#define ETH_P_DDCMP 0x0006 /* DEC DDCMP: Internal only */ +#define ETH_P_WAN_PPP 0x0007 /* Dummy type for WAN PPP frames*/ +#define ETH_P_PPP_MP 0x0008 /* Dummy type for PPP MP frames */ +#define ETH_P_LOCALTALK 0x0009 /* Localtalk pseudo type */ +#define ETH_P_CAN 0x000C /* CAN: Controller Area Network */ +#define ETH_P_CANFD 0x000D /* CANFD: CAN flexible data rate*/ +#define ETH_P_PPPTALK 0x0010 /* Dummy type for Atalk over PPP*/ +#define ETH_P_TR_802_2 0x0011 /* 802.2 frames */ +#define ETH_P_MOBITEX 0x0015 /* Mobitex (kaz@cafe.net) */ +#define ETH_P_CONTROL 0x0016 /* Card specific control frames */ +#define ETH_P_IRDA 0x0017 /* Linux-IrDA */ +#define ETH_P_ECONET 0x0018 /* Acorn Econet */ +#define ETH_P_HDLC 0x0019 /* HDLC frames */ +#define ETH_P_ARCNET 0x001A /* 1A for ArcNet :-) */ +#define ETH_P_DSA 0x001B /* Distributed Switch Arch. */ +#define ETH_P_TRAILER 0x001C /* Trailer switch tagging */ +#define ETH_P_PHONET 0x00F5 /* Nokia Phonet frames */ +#define ETH_P_IEEE802154 0x00F6 /* IEEE802.15.4 frame */ +#define ETH_P_CAIF 0x00F7 /* ST-Ericsson CAIF protocol */ + +/* + * This is an Ethernet frame header. + */ + +struct ethhdr { + unsigned char h_dest[ETH_ALEN]; /* destination eth addr */ + unsigned char h_source[ETH_ALEN]; /* source ether addr */ + __be16 h_proto; /* packet type ID field */ +} __attribute__((packed)); + + +#endif /* _UAPI_LINUX_IF_ETHER_H */ diff --git a/include/linux/if_fc.h b/include/uapi/linux/if_fc.h index 6ed7f1bf35c..6ed7f1bf35c 100644 --- a/include/linux/if_fc.h +++ b/include/uapi/linux/if_fc.h diff --git a/include/uapi/linux/if_fddi.h b/include/uapi/linux/if_fddi.h new file mode 100644 index 00000000000..0d36909c3ae --- /dev/null +++ b/include/uapi/linux/if_fddi.h @@ -0,0 +1,104 @@ +/* + * INET An implementation of the TCP/IP protocol suite for the LINUX + * operating system. INET is implemented using the BSD Socket + * interface as the means of communication with the user level. + * + * Global definitions for the ANSI FDDI interface. + * + * Version: @(#)if_fddi.h 1.0.2 Sep 29 2004 + * + * Author: Lawrence V. Stefani, <stefani@lkg.dec.com> + * + * if_fddi.h is based on previous if_ether.h and if_tr.h work by + * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG> + * Donald Becker, <becker@super.org> + * Alan Cox, <alan@lxorguk.ukuu.org.uk> + * Steve Whitehouse, <gw7rrm@eeshack3.swan.ac.uk> + * Peter De Schrijver, <stud11@cc4.kuleuven.ac.be> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _UAPI_LINUX_IF_FDDI_H +#define _UAPI_LINUX_IF_FDDI_H + +#include <linux/types.h> + +/* + * Define max and min legal sizes. The frame sizes do not include + * 4 byte FCS/CRC (frame check sequence). + */ +#define FDDI_K_ALEN 6 /* Octets in one FDDI address */ +#define FDDI_K_8022_HLEN 16 /* Total octets in 802.2 header */ +#define FDDI_K_SNAP_HLEN 21 /* Total octets in 802.2 SNAP header */ +#define FDDI_K_8022_ZLEN 16 /* Min octets in 802.2 frame sans FCS */ +#define FDDI_K_SNAP_ZLEN 21 /* Min octets in 802.2 SNAP frame sans FCS */ +#define FDDI_K_8022_DLEN 4475 /* Max octets in 802.2 payload */ +#define FDDI_K_SNAP_DLEN 4470 /* Max octets in 802.2 SNAP payload */ +#define FDDI_K_LLC_ZLEN 13 /* Min octets in LLC frame sans FCS */ +#define FDDI_K_LLC_LEN 4491 /* Max octets in LLC frame sans FCS */ + +/* Define FDDI Frame Control (FC) Byte values */ +#define FDDI_FC_K_VOID 0x00 +#define FDDI_FC_K_NON_RESTRICTED_TOKEN 0x80 +#define FDDI_FC_K_RESTRICTED_TOKEN 0xC0 +#define FDDI_FC_K_SMT_MIN 0x41 +#define FDDI_FC_K_SMT_MAX 0x4F +#define FDDI_FC_K_MAC_MIN 0xC1 +#define FDDI_FC_K_MAC_MAX 0xCF +#define FDDI_FC_K_ASYNC_LLC_MIN 0x50 +#define FDDI_FC_K_ASYNC_LLC_DEF 0x54 +#define FDDI_FC_K_ASYNC_LLC_MAX 0x5F +#define FDDI_FC_K_SYNC_LLC_MIN 0xD0 +#define FDDI_FC_K_SYNC_LLC_MAX 0xD7 +#define FDDI_FC_K_IMPLEMENTOR_MIN 0x60 +#define FDDI_FC_K_IMPLEMENTOR_MAX 0x6F +#define FDDI_FC_K_RESERVED_MIN 0x70 +#define FDDI_FC_K_RESERVED_MAX 0x7F + +/* Define LLC and SNAP constants */ +#define FDDI_EXTENDED_SAP 0xAA +#define FDDI_UI_CMD 0x03 + +/* Define 802.2 Type 1 header */ +struct fddi_8022_1_hdr { + __u8 dsap; /* destination service access point */ + __u8 ssap; /* source service access point */ + __u8 ctrl; /* control byte #1 */ +} __attribute__((packed)); + +/* Define 802.2 Type 2 header */ +struct fddi_8022_2_hdr { + __u8 dsap; /* destination service access point */ + __u8 ssap; /* source service access point */ + __u8 ctrl_1; /* control byte #1 */ + __u8 ctrl_2; /* control byte #2 */ +} __attribute__((packed)); + +/* Define 802.2 SNAP header */ +#define FDDI_K_OUI_LEN 3 +struct fddi_snap_hdr { + __u8 dsap; /* always 0xAA */ + __u8 ssap; /* always 0xAA */ + __u8 ctrl; /* always 0x03 */ + __u8 oui[FDDI_K_OUI_LEN]; /* organizational universal id */ + __be16 ethertype; /* packet type ID field */ +} __attribute__((packed)); + +/* Define FDDI LLC frame header */ +struct fddihdr { + __u8 fc; /* frame control */ + __u8 daddr[FDDI_K_ALEN]; /* destination address */ + __u8 saddr[FDDI_K_ALEN]; /* source address */ + union + { + struct fddi_8022_1_hdr llc_8022_1; + struct fddi_8022_2_hdr llc_8022_2; + struct fddi_snap_hdr llc_snap; + } hdr; +} __attribute__((packed)); + + +#endif /* _UAPI_LINUX_IF_FDDI_H */ diff --git a/include/uapi/linux/if_frad.h b/include/uapi/linux/if_frad.h new file mode 100644 index 00000000000..f25b08d5eb6 --- /dev/null +++ b/include/uapi/linux/if_frad.h @@ -0,0 +1,122 @@ +/* + * DLCI/FRAD Definitions for Frame Relay Access Devices. DLCI devices are + * created for each DLCI associated with a FRAD. The FRAD driver + * is not truly a network device, but the lower level device + * handler. This allows other FRAD manufacturers to use the DLCI + * code, including its RFC1490 encapsulation alongside the current + * implementation for the Sangoma cards. + * + * Version: @(#)if_ifrad.h 0.15 31 Mar 96 + * + * Author: Mike McLagan <mike.mclagan@linux.org> + * + * Changes: + * 0.15 Mike McLagan changed structure defs (packed) + * re-arranged flags + * added DLCI_RET vars + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _UAPI_FRAD_H_ +#define _UAPI_FRAD_H_ + +#include <linux/if.h> + +/* Structures and constants associated with the DLCI device driver */ + +struct dlci_add +{ + char devname[IFNAMSIZ]; + short dlci; +}; + +#define DLCI_GET_CONF (SIOCDEVPRIVATE + 2) +#define DLCI_SET_CONF (SIOCDEVPRIVATE + 3) + +/* + * These are related to the Sangoma SDLA and should remain in order. + * Code within the SDLA module is based on the specifics of this + * structure. Change at your own peril. + */ +struct dlci_conf { + short flags; + short CIR_fwd; + short Bc_fwd; + short Be_fwd; + short CIR_bwd; + short Bc_bwd; + short Be_bwd; + +/* these are part of the status read */ + short Tc_fwd; + short Tc_bwd; + short Tf_max; + short Tb_max; + +/* add any new fields here above is a mirror of sdla_dlci_conf */ +}; + +#define DLCI_GET_SLAVE (SIOCDEVPRIVATE + 4) + +/* configuration flags for DLCI */ +#define DLCI_IGNORE_CIR_OUT 0x0001 +#define DLCI_ACCOUNT_CIR_IN 0x0002 +#define DLCI_BUFFER_IF 0x0008 + +#define DLCI_VALID_FLAGS 0x000B + +/* defines for the actual Frame Relay hardware */ +#define FRAD_GET_CONF (SIOCDEVPRIVATE) +#define FRAD_SET_CONF (SIOCDEVPRIVATE + 1) + +#define FRAD_LAST_IOCTL FRAD_SET_CONF + +/* + * Based on the setup for the Sangoma SDLA. If changes are + * necessary to this structure, a routine will need to be + * added to that module to copy fields. + */ +struct frad_conf +{ + short station; + short flags; + short kbaud; + short clocking; + short mtu; + short T391; + short T392; + short N391; + short N392; + short N393; + short CIR_fwd; + short Bc_fwd; + short Be_fwd; + short CIR_bwd; + short Bc_bwd; + short Be_bwd; + +/* Add new fields here, above is a mirror of the sdla_conf */ + +}; + +#define FRAD_STATION_CPE 0x0000 +#define FRAD_STATION_NODE 0x0001 + +#define FRAD_TX_IGNORE_CIR 0x0001 +#define FRAD_RX_ACCOUNT_CIR 0x0002 +#define FRAD_DROP_ABORTED 0x0004 +#define FRAD_BUFFERIF 0x0008 +#define FRAD_STATS 0x0010 +#define FRAD_MCI 0x0100 +#define FRAD_AUTODLCI 0x8000 +#define FRAD_VALID_FLAGS 0x811F + +#define FRAD_CLOCK_INT 0x0001 +#define FRAD_CLOCK_EXT 0x0000 + + +#endif /* _UAPI_FRAD_H_ */ diff --git a/include/linux/if_hippi.h b/include/uapi/linux/if_hippi.h index cdc049f1829..cdc049f1829 100644 --- a/include/linux/if_hippi.h +++ b/include/uapi/linux/if_hippi.h diff --git a/include/linux/if_infiniband.h b/include/uapi/linux/if_infiniband.h index 7d958475d4a..7d958475d4a 100644 --- a/include/linux/if_infiniband.h +++ b/include/uapi/linux/if_infiniband.h diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h new file mode 100644 index 00000000000..5c80cb11518 --- /dev/null +++ b/include/uapi/linux/if_link.h @@ -0,0 +1,429 @@ +#ifndef _UAPI_LINUX_IF_LINK_H +#define _UAPI_LINUX_IF_LINK_H + +#include <linux/types.h> +#include <linux/netlink.h> + +/* This struct should be in sync with struct rtnl_link_stats64 */ +struct rtnl_link_stats { + __u32 rx_packets; /* total packets received */ + __u32 tx_packets; /* total packets transmitted */ + __u32 rx_bytes; /* total bytes received */ + __u32 tx_bytes; /* total bytes transmitted */ + __u32 rx_errors; /* bad packets received */ + __u32 tx_errors; /* packet transmit problems */ + __u32 rx_dropped; /* no space in linux buffers */ + __u32 tx_dropped; /* no space available in linux */ + __u32 multicast; /* multicast packets received */ + __u32 collisions; + + /* detailed rx_errors: */ + __u32 rx_length_errors; + __u32 rx_over_errors; /* receiver ring buff overflow */ + __u32 rx_crc_errors; /* recved pkt with crc error */ + __u32 rx_frame_errors; /* recv'd frame alignment error */ + __u32 rx_fifo_errors; /* recv'r fifo overrun */ + __u32 rx_missed_errors; /* receiver missed packet */ + + /* detailed tx_errors */ + __u32 tx_aborted_errors; + __u32 tx_carrier_errors; + __u32 tx_fifo_errors; + __u32 tx_heartbeat_errors; + __u32 tx_window_errors; + + /* for cslip etc */ + __u32 rx_compressed; + __u32 tx_compressed; +}; + +/* The main device statistics structure */ +struct rtnl_link_stats64 { + __u64 rx_packets; /* total packets received */ + __u64 tx_packets; /* total packets transmitted */ + __u64 rx_bytes; /* total bytes received */ + __u64 tx_bytes; /* total bytes transmitted */ + __u64 rx_errors; /* bad packets received */ + __u64 tx_errors; /* packet transmit problems */ + __u64 rx_dropped; /* no space in linux buffers */ + __u64 tx_dropped; /* no space available in linux */ + __u64 multicast; /* multicast packets received */ + __u64 collisions; + + /* detailed rx_errors: */ + __u64 rx_length_errors; + __u64 rx_over_errors; /* receiver ring buff overflow */ + __u64 rx_crc_errors; /* recved pkt with crc error */ + __u64 rx_frame_errors; /* recv'd frame alignment error */ + __u64 rx_fifo_errors; /* recv'r fifo overrun */ + __u64 rx_missed_errors; /* receiver missed packet */ + + /* detailed tx_errors */ + __u64 tx_aborted_errors; + __u64 tx_carrier_errors; + __u64 tx_fifo_errors; + __u64 tx_heartbeat_errors; + __u64 tx_window_errors; + + /* for cslip etc */ + __u64 rx_compressed; + __u64 tx_compressed; +}; + +/* The struct should be in sync with struct ifmap */ +struct rtnl_link_ifmap { + __u64 mem_start; + __u64 mem_end; + __u64 base_addr; + __u16 irq; + __u8 dma; + __u8 port; +}; + +/* + * IFLA_AF_SPEC + * Contains nested attributes for address family specific attributes. + * Each address family may create a attribute with the address family + * number as type and create its own attribute structure in it. + * + * Example: + * [IFLA_AF_SPEC] = { + * [AF_INET] = { + * [IFLA_INET_CONF] = ..., + * }, + * [AF_INET6] = { + * [IFLA_INET6_FLAGS] = ..., + * [IFLA_INET6_CONF] = ..., + * } + * } + */ + +enum { + IFLA_UNSPEC, + IFLA_ADDRESS, + IFLA_BROADCAST, + IFLA_IFNAME, + IFLA_MTU, + IFLA_LINK, + IFLA_QDISC, + IFLA_STATS, + IFLA_COST, +#define IFLA_COST IFLA_COST + IFLA_PRIORITY, +#define IFLA_PRIORITY IFLA_PRIORITY + IFLA_MASTER, +#define IFLA_MASTER IFLA_MASTER + IFLA_WIRELESS, /* Wireless Extension event - see wireless.h */ +#define IFLA_WIRELESS IFLA_WIRELESS + IFLA_PROTINFO, /* Protocol specific information for a link */ +#define IFLA_PROTINFO IFLA_PROTINFO + IFLA_TXQLEN, +#define IFLA_TXQLEN IFLA_TXQLEN + IFLA_MAP, +#define IFLA_MAP IFLA_MAP + IFLA_WEIGHT, +#define IFLA_WEIGHT IFLA_WEIGHT + IFLA_OPERSTATE, + IFLA_LINKMODE, + IFLA_LINKINFO, +#define IFLA_LINKINFO IFLA_LINKINFO + IFLA_NET_NS_PID, + IFLA_IFALIAS, + IFLA_NUM_VF, /* Number of VFs if device is SR-IOV PF */ + IFLA_VFINFO_LIST, + IFLA_STATS64, + IFLA_VF_PORTS, + IFLA_PORT_SELF, + IFLA_AF_SPEC, + IFLA_GROUP, /* Group the device belongs to */ + IFLA_NET_NS_FD, + IFLA_EXT_MASK, /* Extended info mask, VFs, etc */ + IFLA_PROMISCUITY, /* Promiscuity count: > 0 means acts PROMISC */ +#define IFLA_PROMISCUITY IFLA_PROMISCUITY + IFLA_NUM_TX_QUEUES, + IFLA_NUM_RX_QUEUES, + __IFLA_MAX +}; + + +#define IFLA_MAX (__IFLA_MAX - 1) + +/* backwards compatibility for userspace */ +#ifndef __KERNEL__ +#define IFLA_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct ifinfomsg)))) +#define IFLA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct ifinfomsg)) +#endif + +enum { + IFLA_INET_UNSPEC, + IFLA_INET_CONF, + __IFLA_INET_MAX, +}; + +#define IFLA_INET_MAX (__IFLA_INET_MAX - 1) + +/* ifi_flags. + + IFF_* flags. + + The only change is: + IFF_LOOPBACK, IFF_BROADCAST and IFF_POINTOPOINT are + more not changeable by user. They describe link media + characteristics and set by device driver. + + Comments: + - Combination IFF_BROADCAST|IFF_POINTOPOINT is invalid + - If neither of these three flags are set; + the interface is NBMA. + + - IFF_MULTICAST does not mean anything special: + multicasts can be used on all not-NBMA links. + IFF_MULTICAST means that this media uses special encapsulation + for multicast frames. Apparently, all IFF_POINTOPOINT and + IFF_BROADCAST devices are able to use multicasts too. + */ + +/* IFLA_LINK. + For usual devices it is equal ifi_index. + If it is a "virtual interface" (f.e. tunnel), ifi_link + can point to real physical interface (f.e. for bandwidth calculations), + or maybe 0, what means, that real media is unknown (usual + for IPIP tunnels, when route to endpoint is allowed to change) + */ + +/* Subtype attributes for IFLA_PROTINFO */ +enum { + IFLA_INET6_UNSPEC, + IFLA_INET6_FLAGS, /* link flags */ + IFLA_INET6_CONF, /* sysctl parameters */ + IFLA_INET6_STATS, /* statistics */ + IFLA_INET6_MCAST, /* MC things. What of them? */ + IFLA_INET6_CACHEINFO, /* time values and max reasm size */ + IFLA_INET6_ICMP6STATS, /* statistics (icmpv6) */ + __IFLA_INET6_MAX +}; + +#define IFLA_INET6_MAX (__IFLA_INET6_MAX - 1) + +struct ifla_cacheinfo { + __u32 max_reasm_len; + __u32 tstamp; /* ipv6InterfaceTable updated timestamp */ + __u32 reachable_time; + __u32 retrans_time; +}; + +enum { + IFLA_INFO_UNSPEC, + IFLA_INFO_KIND, + IFLA_INFO_DATA, + IFLA_INFO_XSTATS, + __IFLA_INFO_MAX, +}; + +#define IFLA_INFO_MAX (__IFLA_INFO_MAX - 1) + +/* VLAN section */ + +enum { + IFLA_VLAN_UNSPEC, + IFLA_VLAN_ID, + IFLA_VLAN_FLAGS, + IFLA_VLAN_EGRESS_QOS, + IFLA_VLAN_INGRESS_QOS, + __IFLA_VLAN_MAX, +}; + +#define IFLA_VLAN_MAX (__IFLA_VLAN_MAX - 1) + +struct ifla_vlan_flags { + __u32 flags; + __u32 mask; +}; + +enum { + IFLA_VLAN_QOS_UNSPEC, + IFLA_VLAN_QOS_MAPPING, + __IFLA_VLAN_QOS_MAX +}; + +#define IFLA_VLAN_QOS_MAX (__IFLA_VLAN_QOS_MAX - 1) + +struct ifla_vlan_qos_mapping { + __u32 from; + __u32 to; +}; + +/* MACVLAN section */ +enum { + IFLA_MACVLAN_UNSPEC, + IFLA_MACVLAN_MODE, + IFLA_MACVLAN_FLAGS, + __IFLA_MACVLAN_MAX, +}; + +#define IFLA_MACVLAN_MAX (__IFLA_MACVLAN_MAX - 1) + +enum macvlan_mode { + MACVLAN_MODE_PRIVATE = 1, /* don't talk to other macvlans */ + MACVLAN_MODE_VEPA = 2, /* talk to other ports through ext bridge */ + MACVLAN_MODE_BRIDGE = 4, /* talk to bridge ports directly */ + MACVLAN_MODE_PASSTHRU = 8,/* take over the underlying device */ +}; + +#define MACVLAN_FLAG_NOPROMISC 1 + +/* VXLAN section */ +enum { + IFLA_VXLAN_UNSPEC, + IFLA_VXLAN_ID, + IFLA_VXLAN_GROUP, + IFLA_VXLAN_LINK, + IFLA_VXLAN_LOCAL, + IFLA_VXLAN_TTL, + IFLA_VXLAN_TOS, + IFLA_VXLAN_LEARNING, + IFLA_VXLAN_AGEING, + IFLA_VXLAN_LIMIT, + IFLA_VXLAN_PORT_RANGE, + __IFLA_VXLAN_MAX +}; +#define IFLA_VXLAN_MAX (__IFLA_VXLAN_MAX - 1) + +struct ifla_vxlan_port_range { + __be16 low; + __be16 high; +}; + +/* SR-IOV virtual function management section */ + +enum { + IFLA_VF_INFO_UNSPEC, + IFLA_VF_INFO, + __IFLA_VF_INFO_MAX, +}; + +#define IFLA_VF_INFO_MAX (__IFLA_VF_INFO_MAX - 1) + +enum { + IFLA_VF_UNSPEC, + IFLA_VF_MAC, /* Hardware queue specific attributes */ + IFLA_VF_VLAN, + IFLA_VF_TX_RATE, /* TX Bandwidth Allocation */ + IFLA_VF_SPOOFCHK, /* Spoof Checking on/off switch */ + __IFLA_VF_MAX, +}; + +#define IFLA_VF_MAX (__IFLA_VF_MAX - 1) + +struct ifla_vf_mac { + __u32 vf; + __u8 mac[32]; /* MAX_ADDR_LEN */ +}; + +struct ifla_vf_vlan { + __u32 vf; + __u32 vlan; /* 0 - 4095, 0 disables VLAN filter */ + __u32 qos; +}; + +struct ifla_vf_tx_rate { + __u32 vf; + __u32 rate; /* Max TX bandwidth in Mbps, 0 disables throttling */ +}; + +struct ifla_vf_spoofchk { + __u32 vf; + __u32 setting; +}; + +/* VF ports management section + * + * Nested layout of set/get msg is: + * + * [IFLA_NUM_VF] + * [IFLA_VF_PORTS] + * [IFLA_VF_PORT] + * [IFLA_PORT_*], ... + * [IFLA_VF_PORT] + * [IFLA_PORT_*], ... + * ... + * [IFLA_PORT_SELF] + * [IFLA_PORT_*], ... + */ + +enum { + IFLA_VF_PORT_UNSPEC, + IFLA_VF_PORT, /* nest */ + __IFLA_VF_PORT_MAX, +}; + +#define IFLA_VF_PORT_MAX (__IFLA_VF_PORT_MAX - 1) + +enum { + IFLA_PORT_UNSPEC, + IFLA_PORT_VF, /* __u32 */ + IFLA_PORT_PROFILE, /* string */ + IFLA_PORT_VSI_TYPE, /* 802.1Qbg (pre-)standard VDP */ + IFLA_PORT_INSTANCE_UUID, /* binary UUID */ + IFLA_PORT_HOST_UUID, /* binary UUID */ + IFLA_PORT_REQUEST, /* __u8 */ + IFLA_PORT_RESPONSE, /* __u16, output only */ + __IFLA_PORT_MAX, +}; + +#define IFLA_PORT_MAX (__IFLA_PORT_MAX - 1) + +#define PORT_PROFILE_MAX 40 +#define PORT_UUID_MAX 16 +#define PORT_SELF_VF -1 + +enum { + PORT_REQUEST_PREASSOCIATE = 0, + PORT_REQUEST_PREASSOCIATE_RR, + PORT_REQUEST_ASSOCIATE, + PORT_REQUEST_DISASSOCIATE, +}; + +enum { + PORT_VDP_RESPONSE_SUCCESS = 0, + PORT_VDP_RESPONSE_INVALID_FORMAT, + PORT_VDP_RESPONSE_INSUFFICIENT_RESOURCES, + PORT_VDP_RESPONSE_UNUSED_VTID, + PORT_VDP_RESPONSE_VTID_VIOLATION, + PORT_VDP_RESPONSE_VTID_VERSION_VIOALTION, + PORT_VDP_RESPONSE_OUT_OF_SYNC, + /* 0x08-0xFF reserved for future VDP use */ + PORT_PROFILE_RESPONSE_SUCCESS = 0x100, + PORT_PROFILE_RESPONSE_INPROGRESS, + PORT_PROFILE_RESPONSE_INVALID, + PORT_PROFILE_RESPONSE_BADSTATE, + PORT_PROFILE_RESPONSE_INSUFFICIENT_RESOURCES, + PORT_PROFILE_RESPONSE_ERROR, +}; + +struct ifla_port_vsi { + __u8 vsi_mgr_id; + __u8 vsi_type_id[3]; + __u8 vsi_type_version; + __u8 pad[3]; +}; + + +/* IPoIB section */ + +enum { + IFLA_IPOIB_UNSPEC, + IFLA_IPOIB_PKEY, + IFLA_IPOIB_MODE, + IFLA_IPOIB_UMCAST, + __IFLA_IPOIB_MAX +}; + +enum { + IPOIB_MODE_DATAGRAM = 0, /* using unreliable datagram QPs */ + IPOIB_MODE_CONNECTED = 1, /* using connected QPs */ +}; + +#define IFLA_IPOIB_MAX (__IFLA_IPOIB_MAX - 1) + +#endif /* _UAPI_LINUX_IF_LINK_H */ diff --git a/include/uapi/linux/if_ltalk.h b/include/uapi/linux/if_ltalk.h new file mode 100644 index 00000000000..b92c1fb6ac1 --- /dev/null +++ b/include/uapi/linux/if_ltalk.h @@ -0,0 +1,9 @@ +#ifndef _UAPI__LINUX_LTALK_H +#define _UAPI__LINUX_LTALK_H + +#define LTALK_HLEN 1 +#define LTALK_MTU 600 +#define LTALK_ALEN 1 + + +#endif /* _UAPI__LINUX_LTALK_H */ diff --git a/include/linux/if_packet.h b/include/uapi/linux/if_packet.h index f3799295d23..f3799295d23 100644 --- a/include/linux/if_packet.h +++ b/include/uapi/linux/if_packet.h diff --git a/include/uapi/linux/if_phonet.h b/include/uapi/linux/if_phonet.h new file mode 100644 index 00000000000..f7ad9e24eb3 --- /dev/null +++ b/include/uapi/linux/if_phonet.h @@ -0,0 +1,16 @@ +/* + * File: if_phonet.h + * + * Phonet interface kernel definitions + * + * Copyright (C) 2008 Nokia Corporation. All rights reserved. + */ +#ifndef _UAPILINUX_IF_PHONET_H +#define _UAPILINUX_IF_PHONET_H + +#define PHONET_MIN_MTU 6 /* pn_length = 0 */ +#define PHONET_MAX_MTU 65541 /* pn_length = 0xffff */ +#define PHONET_DEV_MTU PHONET_MAX_MTU + + +#endif /* _UAPILINUX_IF_PHONET_H */ diff --git a/include/linux/if_plip.h b/include/uapi/linux/if_plip.h index 6298c7e88b2..6298c7e88b2 100644 --- a/include/linux/if_plip.h +++ b/include/uapi/linux/if_plip.h diff --git a/include/linux/if_ppp.h b/include/uapi/linux/if_ppp.h index 9048fabb7a4..9048fabb7a4 100644 --- a/include/linux/if_ppp.h +++ b/include/uapi/linux/if_ppp.h diff --git a/include/uapi/linux/if_pppol2tp.h b/include/uapi/linux/if_pppol2tp.h new file mode 100644 index 00000000000..163e8adac2d --- /dev/null +++ b/include/uapi/linux/if_pppol2tp.h @@ -0,0 +1,104 @@ +/*************************************************************************** + * Linux PPP over L2TP (PPPoL2TP) Socket Implementation (RFC 2661) + * + * This file supplies definitions required by the PPP over L2TP driver + * (l2tp_ppp.c). All version information wrt this file is located in l2tp_ppp.c + * + * License: + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +#ifndef _UAPI__LINUX_IF_PPPOL2TP_H +#define _UAPI__LINUX_IF_PPPOL2TP_H + +#include <linux/types.h> + + +/* Structure used to connect() the socket to a particular tunnel UDP + * socket over IPv4. + */ +struct pppol2tp_addr { + __kernel_pid_t pid; /* pid that owns the fd. + * 0 => current */ + int fd; /* FD of UDP socket to use */ + + struct sockaddr_in addr; /* IP address and port to send to */ + + __u16 s_tunnel, s_session; /* For matching incoming packets */ + __u16 d_tunnel, d_session; /* For sending outgoing packets */ +}; + +/* Structure used to connect() the socket to a particular tunnel UDP + * socket over IPv6. + */ +struct pppol2tpin6_addr { + __kernel_pid_t pid; /* pid that owns the fd. + * 0 => current */ + int fd; /* FD of UDP socket to use */ + + __u16 s_tunnel, s_session; /* For matching incoming packets */ + __u16 d_tunnel, d_session; /* For sending outgoing packets */ + + struct sockaddr_in6 addr; /* IP address and port to send to */ +}; + +/* The L2TPv3 protocol changes tunnel and session ids from 16 to 32 + * bits. So we need a different sockaddr structure. + */ +struct pppol2tpv3_addr { + __kernel_pid_t pid; /* pid that owns the fd. + * 0 => current */ + int fd; /* FD of UDP or IP socket to use */ + + struct sockaddr_in addr; /* IP address and port to send to */ + + __u32 s_tunnel, s_session; /* For matching incoming packets */ + __u32 d_tunnel, d_session; /* For sending outgoing packets */ +}; + +struct pppol2tpv3in6_addr { + __kernel_pid_t pid; /* pid that owns the fd. + * 0 => current */ + int fd; /* FD of UDP or IP socket to use */ + + __u32 s_tunnel, s_session; /* For matching incoming packets */ + __u32 d_tunnel, d_session; /* For sending outgoing packets */ + + struct sockaddr_in6 addr; /* IP address and port to send to */ +}; + +/* Socket options: + * DEBUG - bitmask of debug message categories + * SENDSEQ - 0 => don't send packets with sequence numbers + * 1 => send packets with sequence numbers + * RECVSEQ - 0 => receive packet sequence numbers are optional + * 1 => drop receive packets without sequence numbers + * LNSMODE - 0 => act as LAC. + * 1 => act as LNS. + * REORDERTO - reorder timeout (in millisecs). If 0, don't try to reorder. + */ +enum { + PPPOL2TP_SO_DEBUG = 1, + PPPOL2TP_SO_RECVSEQ = 2, + PPPOL2TP_SO_SENDSEQ = 3, + PPPOL2TP_SO_LNSMODE = 4, + PPPOL2TP_SO_REORDERTO = 5, +}; + +/* Debug message categories for the DEBUG socket option */ +enum { + PPPOL2TP_MSG_DEBUG = (1 << 0), /* verbose debug (if + * compiled in) */ + PPPOL2TP_MSG_CONTROL = (1 << 1), /* userspace - kernel + * interface */ + PPPOL2TP_MSG_SEQ = (1 << 2), /* sequence numbers */ + PPPOL2TP_MSG_DATA = (1 << 3), /* data packets */ +}; + + + +#endif /* _UAPI__LINUX_IF_PPPOL2TP_H */ diff --git a/include/uapi/linux/if_pppox.h b/include/uapi/linux/if_pppox.h new file mode 100644 index 00000000000..0b46fd57c8f --- /dev/null +++ b/include/uapi/linux/if_pppox.h @@ -0,0 +1,156 @@ +/*************************************************************************** + * Linux PPP over X - Generic PPP transport layer sockets + * Linux PPP over Ethernet (PPPoE) Socket Implementation (RFC 2516) + * + * This file supplies definitions required by the PPP over Ethernet driver + * (pppox.c). All version information wrt this file is located in pppox.c + * + * License: + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +#ifndef _UAPI__LINUX_IF_PPPOX_H +#define _UAPI__LINUX_IF_PPPOX_H + + +#include <linux/types.h> +#include <asm/byteorder.h> + +#include <linux/socket.h> +#include <linux/if_ether.h> +#include <linux/if_pppol2tp.h> + +/* For user-space programs to pick up these definitions + * which they wouldn't get otherwise without defining __KERNEL__ + */ +#ifndef AF_PPPOX +#define AF_PPPOX 24 +#define PF_PPPOX AF_PPPOX +#endif /* !(AF_PPPOX) */ + +/************************************************************************ + * PPPoE addressing definition + */ +typedef __be16 sid_t; +struct pppoe_addr { + sid_t sid; /* Session identifier */ + unsigned char remote[ETH_ALEN]; /* Remote address */ + char dev[IFNAMSIZ]; /* Local device to use */ +}; + +/************************************************************************ + * PPTP addressing definition + */ +struct pptp_addr { + __be16 call_id; + struct in_addr sin_addr; +}; + +/************************************************************************ + * Protocols supported by AF_PPPOX + */ +#define PX_PROTO_OE 0 /* Currently just PPPoE */ +#define PX_PROTO_OL2TP 1 /* Now L2TP also */ +#define PX_PROTO_PPTP 2 +#define PX_MAX_PROTO 3 + +struct sockaddr_pppox { + __kernel_sa_family_t sa_family; /* address family, AF_PPPOX */ + unsigned int sa_protocol; /* protocol identifier */ + union { + struct pppoe_addr pppoe; + struct pptp_addr pptp; + } sa_addr; +} __packed; + +/* The use of the above union isn't viable because the size of this + * struct must stay fixed over time -- applications use sizeof(struct + * sockaddr_pppox) to fill it. We use a protocol specific sockaddr + * type instead. + */ +struct sockaddr_pppol2tp { + __kernel_sa_family_t sa_family; /* address family, AF_PPPOX */ + unsigned int sa_protocol; /* protocol identifier */ + struct pppol2tp_addr pppol2tp; +} __packed; + +struct sockaddr_pppol2tpin6 { + __kernel_sa_family_t sa_family; /* address family, AF_PPPOX */ + unsigned int sa_protocol; /* protocol identifier */ + struct pppol2tpin6_addr pppol2tp; +} __packed; + +/* The L2TPv3 protocol changes tunnel and session ids from 16 to 32 + * bits. So we need a different sockaddr structure. + */ +struct sockaddr_pppol2tpv3 { + __kernel_sa_family_t sa_family; /* address family, AF_PPPOX */ + unsigned int sa_protocol; /* protocol identifier */ + struct pppol2tpv3_addr pppol2tp; +} __packed; + +struct sockaddr_pppol2tpv3in6 { + __kernel_sa_family_t sa_family; /* address family, AF_PPPOX */ + unsigned int sa_protocol; /* protocol identifier */ + struct pppol2tpv3in6_addr pppol2tp; +} __packed; + +/********************************************************************* + * + * ioctl interface for defining forwarding of connections + * + ********************************************************************/ + +#define PPPOEIOCSFWD _IOW(0xB1 ,0, size_t) +#define PPPOEIOCDFWD _IO(0xB1 ,1) +/*#define PPPOEIOCGFWD _IOWR(0xB1,2, size_t)*/ + +/* Codes to identify message types */ +#define PADI_CODE 0x09 +#define PADO_CODE 0x07 +#define PADR_CODE 0x19 +#define PADS_CODE 0x65 +#define PADT_CODE 0xa7 +struct pppoe_tag { + __be16 tag_type; + __be16 tag_len; + char tag_data[0]; +} __attribute__ ((packed)); + +/* Tag identifiers */ +#define PTT_EOL __cpu_to_be16(0x0000) +#define PTT_SRV_NAME __cpu_to_be16(0x0101) +#define PTT_AC_NAME __cpu_to_be16(0x0102) +#define PTT_HOST_UNIQ __cpu_to_be16(0x0103) +#define PTT_AC_COOKIE __cpu_to_be16(0x0104) +#define PTT_VENDOR __cpu_to_be16(0x0105) +#define PTT_RELAY_SID __cpu_to_be16(0x0110) +#define PTT_SRV_ERR __cpu_to_be16(0x0201) +#define PTT_SYS_ERR __cpu_to_be16(0x0202) +#define PTT_GEN_ERR __cpu_to_be16(0x0203) + +struct pppoe_hdr { +#if defined(__LITTLE_ENDIAN_BITFIELD) + __u8 ver : 4; + __u8 type : 4; +#elif defined(__BIG_ENDIAN_BITFIELD) + __u8 type : 4; + __u8 ver : 4; +#else +#error "Please fix <asm/byteorder.h>" +#endif + __u8 code; + __be16 sid; + __be16 length; + struct pppoe_tag tag[0]; +} __packed; + +/* Length of entire PPPoE + PPP header */ +#define PPPOE_SES_HLEN 8 + + +#endif /* _UAPI__LINUX_IF_PPPOX_H */ diff --git a/include/linux/if_slip.h b/include/uapi/linux/if_slip.h index 1eb4e3a8397..1eb4e3a8397 100644 --- a/include/linux/if_slip.h +++ b/include/uapi/linux/if_slip.h diff --git a/include/uapi/linux/if_team.h b/include/uapi/linux/if_team.h new file mode 100644 index 00000000000..7b8fa339de3 --- /dev/null +++ b/include/uapi/linux/if_team.h @@ -0,0 +1,107 @@ +/* + * include/linux/if_team.h - Network team device driver header + * Copyright (c) 2011 Jiri Pirko <jpirko@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef _UAPI_LINUX_IF_TEAM_H_ +#define _UAPI_LINUX_IF_TEAM_H_ + + +#define TEAM_STRING_MAX_LEN 32 + +/********************************** + * NETLINK_GENERIC netlink family. + **********************************/ + +enum { + TEAM_CMD_NOOP, + TEAM_CMD_OPTIONS_SET, + TEAM_CMD_OPTIONS_GET, + TEAM_CMD_PORT_LIST_GET, + + __TEAM_CMD_MAX, + TEAM_CMD_MAX = (__TEAM_CMD_MAX - 1), +}; + +enum { + TEAM_ATTR_UNSPEC, + TEAM_ATTR_TEAM_IFINDEX, /* u32 */ + TEAM_ATTR_LIST_OPTION, /* nest */ + TEAM_ATTR_LIST_PORT, /* nest */ + + __TEAM_ATTR_MAX, + TEAM_ATTR_MAX = __TEAM_ATTR_MAX - 1, +}; + +/* Nested layout of get/set msg: + * + * [TEAM_ATTR_LIST_OPTION] + * [TEAM_ATTR_ITEM_OPTION] + * [TEAM_ATTR_OPTION_*], ... + * [TEAM_ATTR_ITEM_OPTION] + * [TEAM_ATTR_OPTION_*], ... + * ... + * [TEAM_ATTR_LIST_PORT] + * [TEAM_ATTR_ITEM_PORT] + * [TEAM_ATTR_PORT_*], ... + * [TEAM_ATTR_ITEM_PORT] + * [TEAM_ATTR_PORT_*], ... + * ... + */ + +enum { + TEAM_ATTR_ITEM_OPTION_UNSPEC, + TEAM_ATTR_ITEM_OPTION, /* nest */ + + __TEAM_ATTR_ITEM_OPTION_MAX, + TEAM_ATTR_ITEM_OPTION_MAX = __TEAM_ATTR_ITEM_OPTION_MAX - 1, +}; + +enum { + TEAM_ATTR_OPTION_UNSPEC, + TEAM_ATTR_OPTION_NAME, /* string */ + TEAM_ATTR_OPTION_CHANGED, /* flag */ + TEAM_ATTR_OPTION_TYPE, /* u8 */ + TEAM_ATTR_OPTION_DATA, /* dynamic */ + TEAM_ATTR_OPTION_REMOVED, /* flag */ + TEAM_ATTR_OPTION_PORT_IFINDEX, /* u32 */ /* for per-port options */ + TEAM_ATTR_OPTION_ARRAY_INDEX, /* u32 */ /* for array options */ + + __TEAM_ATTR_OPTION_MAX, + TEAM_ATTR_OPTION_MAX = __TEAM_ATTR_OPTION_MAX - 1, +}; + +enum { + TEAM_ATTR_ITEM_PORT_UNSPEC, + TEAM_ATTR_ITEM_PORT, /* nest */ + + __TEAM_ATTR_ITEM_PORT_MAX, + TEAM_ATTR_ITEM_PORT_MAX = __TEAM_ATTR_ITEM_PORT_MAX - 1, +}; + +enum { + TEAM_ATTR_PORT_UNSPEC, + TEAM_ATTR_PORT_IFINDEX, /* u32 */ + TEAM_ATTR_PORT_CHANGED, /* flag */ + TEAM_ATTR_PORT_LINKUP, /* flag */ + TEAM_ATTR_PORT_SPEED, /* u32 */ + TEAM_ATTR_PORT_DUPLEX, /* u8 */ + TEAM_ATTR_PORT_REMOVED, /* flag */ + + __TEAM_ATTR_PORT_MAX, + TEAM_ATTR_PORT_MAX = __TEAM_ATTR_PORT_MAX - 1, +}; + +/* + * NETLINK_GENERIC related info + */ +#define TEAM_GENL_NAME "team" +#define TEAM_GENL_VERSION 0x1 +#define TEAM_GENL_CHANGE_EVENT_MC_GRP_NAME "change_event" + +#endif /* _UAPI_LINUX_IF_TEAM_H_ */ diff --git a/include/uapi/linux/if_tun.h b/include/uapi/linux/if_tun.h new file mode 100644 index 00000000000..25a585ce23e --- /dev/null +++ b/include/uapi/linux/if_tun.h @@ -0,0 +1,94 @@ +/* + * Universal TUN/TAP device driver. + * Copyright (C) 1999-2000 Maxim Krasnyansky <max_mk@yahoo.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _UAPI__IF_TUN_H +#define _UAPI__IF_TUN_H + +#include <linux/types.h> +#include <linux/if_ether.h> +#include <linux/filter.h> + +/* Read queue size */ +#define TUN_READQ_SIZE 500 + +/* TUN device flags */ +#define TUN_TUN_DEV 0x0001 +#define TUN_TAP_DEV 0x0002 +#define TUN_TYPE_MASK 0x000f + +#define TUN_FASYNC 0x0010 +#define TUN_NOCHECKSUM 0x0020 +#define TUN_NO_PI 0x0040 +#define TUN_ONE_QUEUE 0x0080 +#define TUN_PERSIST 0x0100 +#define TUN_VNET_HDR 0x0200 + +/* Ioctl defines */ +#define TUNSETNOCSUM _IOW('T', 200, int) +#define TUNSETDEBUG _IOW('T', 201, int) +#define TUNSETIFF _IOW('T', 202, int) +#define TUNSETPERSIST _IOW('T', 203, int) +#define TUNSETOWNER _IOW('T', 204, int) +#define TUNSETLINK _IOW('T', 205, int) +#define TUNSETGROUP _IOW('T', 206, int) +#define TUNGETFEATURES _IOR('T', 207, unsigned int) +#define TUNSETOFFLOAD _IOW('T', 208, unsigned int) +#define TUNSETTXFILTER _IOW('T', 209, unsigned int) +#define TUNGETIFF _IOR('T', 210, unsigned int) +#define TUNGETSNDBUF _IOR('T', 211, int) +#define TUNSETSNDBUF _IOW('T', 212, int) +#define TUNATTACHFILTER _IOW('T', 213, struct sock_fprog) +#define TUNDETACHFILTER _IOW('T', 214, struct sock_fprog) +#define TUNGETVNETHDRSZ _IOR('T', 215, int) +#define TUNSETVNETHDRSZ _IOW('T', 216, int) + +/* TUNSETIFF ifr flags */ +#define IFF_TUN 0x0001 +#define IFF_TAP 0x0002 +#define IFF_NO_PI 0x1000 +#define IFF_ONE_QUEUE 0x2000 +#define IFF_VNET_HDR 0x4000 +#define IFF_TUN_EXCL 0x8000 + +/* Features for GSO (TUNSETOFFLOAD). */ +#define TUN_F_CSUM 0x01 /* You can hand me unchecksummed packets. */ +#define TUN_F_TSO4 0x02 /* I can handle TSO for IPv4 packets */ +#define TUN_F_TSO6 0x04 /* I can handle TSO for IPv6 packets */ +#define TUN_F_TSO_ECN 0x08 /* I can handle TSO with ECN bits. */ +#define TUN_F_UFO 0x10 /* I can handle UFO packets */ + +/* Protocol info prepended to the packets (when IFF_NO_PI is not set) */ +#define TUN_PKT_STRIP 0x0001 +struct tun_pi { + __u16 flags; + __be16 proto; +}; + +/* + * Filter spec (used for SETXXFILTER ioctls) + * This stuff is applicable only to the TAP (Ethernet) devices. + * If the count is zero the filter is disabled and the driver accepts + * all packets (promisc mode). + * If the filter is enabled in order to accept broadcast packets + * broadcast addr must be explicitly included in the addr list. + */ +#define TUN_FLT_ALLMULTI 0x0001 /* Accept all multicast packets */ +struct tun_filter { + __u16 flags; /* TUN_FLT_ flags see above */ + __u16 count; /* Number of addresses */ + __u8 addr[0][ETH_ALEN]; +}; + +#endif /* _UAPI__IF_TUN_H */ diff --git a/include/uapi/linux/if_tunnel.h b/include/uapi/linux/if_tunnel.h new file mode 100644 index 00000000000..5db5942575f --- /dev/null +++ b/include/uapi/linux/if_tunnel.h @@ -0,0 +1,96 @@ +#ifndef _UAPI_IF_TUNNEL_H_ +#define _UAPI_IF_TUNNEL_H_ + +#include <linux/types.h> +#include <asm/byteorder.h> + + +#define SIOCGETTUNNEL (SIOCDEVPRIVATE + 0) +#define SIOCADDTUNNEL (SIOCDEVPRIVATE + 1) +#define SIOCDELTUNNEL (SIOCDEVPRIVATE + 2) +#define SIOCCHGTUNNEL (SIOCDEVPRIVATE + 3) +#define SIOCGETPRL (SIOCDEVPRIVATE + 4) +#define SIOCADDPRL (SIOCDEVPRIVATE + 5) +#define SIOCDELPRL (SIOCDEVPRIVATE + 6) +#define SIOCCHGPRL (SIOCDEVPRIVATE + 7) +#define SIOCGET6RD (SIOCDEVPRIVATE + 8) +#define SIOCADD6RD (SIOCDEVPRIVATE + 9) +#define SIOCDEL6RD (SIOCDEVPRIVATE + 10) +#define SIOCCHG6RD (SIOCDEVPRIVATE + 11) + +#define GRE_CSUM __cpu_to_be16(0x8000) +#define GRE_ROUTING __cpu_to_be16(0x4000) +#define GRE_KEY __cpu_to_be16(0x2000) +#define GRE_SEQ __cpu_to_be16(0x1000) +#define GRE_STRICT __cpu_to_be16(0x0800) +#define GRE_REC __cpu_to_be16(0x0700) +#define GRE_FLAGS __cpu_to_be16(0x00F8) +#define GRE_VERSION __cpu_to_be16(0x0007) + +struct ip_tunnel_parm { + char name[IFNAMSIZ]; + int link; + __be16 i_flags; + __be16 o_flags; + __be32 i_key; + __be32 o_key; + struct iphdr iph; +}; + +/* SIT-mode i_flags */ +#define SIT_ISATAP 0x0001 + +struct ip_tunnel_prl { + __be32 addr; + __u16 flags; + __u16 __reserved; + __u32 datalen; + __u32 __reserved2; + /* data follows */ +}; + +/* PRL flags */ +#define PRL_DEFAULT 0x0001 + +struct ip_tunnel_6rd { + struct in6_addr prefix; + __be32 relay_prefix; + __u16 prefixlen; + __u16 relay_prefixlen; +}; + +enum { + IFLA_GRE_UNSPEC, + IFLA_GRE_LINK, + IFLA_GRE_IFLAGS, + IFLA_GRE_OFLAGS, + IFLA_GRE_IKEY, + IFLA_GRE_OKEY, + IFLA_GRE_LOCAL, + IFLA_GRE_REMOTE, + IFLA_GRE_TTL, + IFLA_GRE_TOS, + IFLA_GRE_PMTUDISC, + IFLA_GRE_ENCAP_LIMIT, + IFLA_GRE_FLOWINFO, + IFLA_GRE_FLAGS, + __IFLA_GRE_MAX, +}; + +#define IFLA_GRE_MAX (__IFLA_GRE_MAX - 1) + +/* VTI-mode i_flags */ +#define VTI_ISVTI 0x0001 + +enum { + IFLA_VTI_UNSPEC, + IFLA_VTI_LINK, + IFLA_VTI_IKEY, + IFLA_VTI_OKEY, + IFLA_VTI_LOCAL, + IFLA_VTI_REMOTE, + __IFLA_VTI_MAX, +}; + +#define IFLA_VTI_MAX (__IFLA_VTI_MAX - 1) +#endif /* _UAPI_IF_TUNNEL_H_ */ diff --git a/include/uapi/linux/if_vlan.h b/include/uapi/linux/if_vlan.h new file mode 100644 index 00000000000..0744f8e65d1 --- /dev/null +++ b/include/uapi/linux/if_vlan.h @@ -0,0 +1,63 @@ +/* + * VLAN An implementation of 802.1Q VLAN tagging. + * + * Authors: Ben Greear <greearb@candelatech.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +#ifndef _UAPI_LINUX_IF_VLAN_H_ +#define _UAPI_LINUX_IF_VLAN_H_ + + +/* VLAN IOCTLs are found in sockios.h */ + +/* Passed in vlan_ioctl_args structure to determine behaviour. */ +enum vlan_ioctl_cmds { + ADD_VLAN_CMD, + DEL_VLAN_CMD, + SET_VLAN_INGRESS_PRIORITY_CMD, + SET_VLAN_EGRESS_PRIORITY_CMD, + GET_VLAN_INGRESS_PRIORITY_CMD, + GET_VLAN_EGRESS_PRIORITY_CMD, + SET_VLAN_NAME_TYPE_CMD, + SET_VLAN_FLAG_CMD, + GET_VLAN_REALDEV_NAME_CMD, /* If this works, you know it's a VLAN device, btw */ + GET_VLAN_VID_CMD /* Get the VID of this VLAN (specified by name) */ +}; + +enum vlan_flags { + VLAN_FLAG_REORDER_HDR = 0x1, + VLAN_FLAG_GVRP = 0x2, + VLAN_FLAG_LOOSE_BINDING = 0x4, +}; + +enum vlan_name_types { + VLAN_NAME_TYPE_PLUS_VID, /* Name will look like: vlan0005 */ + VLAN_NAME_TYPE_RAW_PLUS_VID, /* name will look like: eth1.0005 */ + VLAN_NAME_TYPE_PLUS_VID_NO_PAD, /* Name will look like: vlan5 */ + VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD, /* Name will look like: eth0.5 */ + VLAN_NAME_TYPE_HIGHEST +}; + +struct vlan_ioctl_args { + int cmd; /* Should be one of the vlan_ioctl_cmds enum above. */ + char device1[24]; + + union { + char device2[24]; + int VID; + unsigned int skb_priority; + unsigned int name_type; + unsigned int bind_type; + unsigned int flag; /* Matches vlan_dev_priv flags */ + } u; + + short vlan_qos; +}; + +#endif /* _UAPI_LINUX_IF_VLAN_H_ */ diff --git a/include/linux/if_x25.h b/include/uapi/linux/if_x25.h index 897765f5feb..897765f5feb 100644 --- a/include/linux/if_x25.h +++ b/include/uapi/linux/if_x25.h diff --git a/include/uapi/linux/igmp.h b/include/uapi/linux/igmp.h new file mode 100644 index 00000000000..ccbb32aa670 --- /dev/null +++ b/include/uapi/linux/igmp.h @@ -0,0 +1,128 @@ +/* + * Linux NET3: Internet Group Management Protocol [IGMP] + * + * Authors: + * Alan Cox <alan@lxorguk.ukuu.org.uk> + * + * Extended to talk the BSD extended IGMP protocol of mrouted 3.6 + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _UAPI_LINUX_IGMP_H +#define _UAPI_LINUX_IGMP_H + +#include <linux/types.h> +#include <asm/byteorder.h> + +/* + * IGMP protocol structures + */ + +/* + * Header in on cable format + */ + +struct igmphdr { + __u8 type; + __u8 code; /* For newer IGMP */ + __sum16 csum; + __be32 group; +}; + +/* V3 group record types [grec_type] */ +#define IGMPV3_MODE_IS_INCLUDE 1 +#define IGMPV3_MODE_IS_EXCLUDE 2 +#define IGMPV3_CHANGE_TO_INCLUDE 3 +#define IGMPV3_CHANGE_TO_EXCLUDE 4 +#define IGMPV3_ALLOW_NEW_SOURCES 5 +#define IGMPV3_BLOCK_OLD_SOURCES 6 + +struct igmpv3_grec { + __u8 grec_type; + __u8 grec_auxwords; + __be16 grec_nsrcs; + __be32 grec_mca; + __be32 grec_src[0]; +}; + +struct igmpv3_report { + __u8 type; + __u8 resv1; + __be16 csum; + __be16 resv2; + __be16 ngrec; + struct igmpv3_grec grec[0]; +}; + +struct igmpv3_query { + __u8 type; + __u8 code; + __be16 csum; + __be32 group; +#if defined(__LITTLE_ENDIAN_BITFIELD) + __u8 qrv:3, + suppress:1, + resv:4; +#elif defined(__BIG_ENDIAN_BITFIELD) + __u8 resv:4, + suppress:1, + qrv:3; +#else +#error "Please fix <asm/byteorder.h>" +#endif + __u8 qqic; + __be16 nsrcs; + __be32 srcs[0]; +}; + +#define IGMP_HOST_MEMBERSHIP_QUERY 0x11 /* From RFC1112 */ +#define IGMP_HOST_MEMBERSHIP_REPORT 0x12 /* Ditto */ +#define IGMP_DVMRP 0x13 /* DVMRP routing */ +#define IGMP_PIM 0x14 /* PIM routing */ +#define IGMP_TRACE 0x15 +#define IGMPV2_HOST_MEMBERSHIP_REPORT 0x16 /* V2 version of 0x12 */ +#define IGMP_HOST_LEAVE_MESSAGE 0x17 +#define IGMPV3_HOST_MEMBERSHIP_REPORT 0x22 /* V3 version of 0x12 */ + +#define IGMP_MTRACE_RESP 0x1e +#define IGMP_MTRACE 0x1f + + +/* + * Use the BSD names for these for compatibility + */ + +#define IGMP_DELAYING_MEMBER 0x01 +#define IGMP_IDLE_MEMBER 0x02 +#define IGMP_LAZY_MEMBER 0x03 +#define IGMP_SLEEPING_MEMBER 0x04 +#define IGMP_AWAKENING_MEMBER 0x05 + +#define IGMP_MINLEN 8 + +#define IGMP_MAX_HOST_REPORT_DELAY 10 /* max delay for response to */ + /* query (in seconds) */ + +#define IGMP_TIMER_SCALE 10 /* denotes that the igmphdr->timer field */ + /* specifies time in 10th of seconds */ + +#define IGMP_AGE_THRESHOLD 400 /* If this host don't hear any IGMP V1 */ + /* message in this period of time, */ + /* revert to IGMP v2 router. */ + +#define IGMP_ALL_HOSTS htonl(0xE0000001L) +#define IGMP_ALL_ROUTER htonl(0xE0000002L) +#define IGMPV3_ALL_MCR htonl(0xE0000016L) +#define IGMP_LOCAL_GROUP htonl(0xE0000000L) +#define IGMP_LOCAL_GROUP_MASK htonl(0xFFFFFF00L) + +/* + * struct for keeping the multicast list in + */ + +#endif /* _UAPI_LINUX_IGMP_H */ diff --git a/include/uapi/linux/in.h b/include/uapi/linux/in.h new file mode 100644 index 00000000000..9edb441df82 --- /dev/null +++ b/include/uapi/linux/in.h @@ -0,0 +1,253 @@ +/* + * INET An implementation of the TCP/IP protocol suite for the LINUX + * operating system. INET is implemented using the BSD Socket + * interface as the means of communication with the user level. + * + * Definitions of the Internet Protocol. + * + * Version: @(#)in.h 1.0.1 04/21/93 + * + * Authors: Original taken from the GNU Project <netinet/in.h> file. + * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _UAPI_LINUX_IN_H +#define _UAPI_LINUX_IN_H + +#include <linux/types.h> +#include <linux/socket.h> + +/* Standard well-defined IP protocols. */ +enum { + IPPROTO_IP = 0, /* Dummy protocol for TCP */ + IPPROTO_ICMP = 1, /* Internet Control Message Protocol */ + IPPROTO_IGMP = 2, /* Internet Group Management Protocol */ + IPPROTO_IPIP = 4, /* IPIP tunnels (older KA9Q tunnels use 94) */ + IPPROTO_TCP = 6, /* Transmission Control Protocol */ + IPPROTO_EGP = 8, /* Exterior Gateway Protocol */ + IPPROTO_PUP = 12, /* PUP protocol */ + IPPROTO_UDP = 17, /* User Datagram Protocol */ + IPPROTO_IDP = 22, /* XNS IDP protocol */ + IPPROTO_DCCP = 33, /* Datagram Congestion Control Protocol */ + IPPROTO_RSVP = 46, /* RSVP protocol */ + IPPROTO_GRE = 47, /* Cisco GRE tunnels (rfc 1701,1702) */ + + IPPROTO_IPV6 = 41, /* IPv6-in-IPv4 tunnelling */ + + IPPROTO_ESP = 50, /* Encapsulation Security Payload protocol */ + IPPROTO_AH = 51, /* Authentication Header protocol */ + IPPROTO_BEETPH = 94, /* IP option pseudo header for BEET */ + IPPROTO_PIM = 103, /* Protocol Independent Multicast */ + + IPPROTO_COMP = 108, /* Compression Header protocol */ + IPPROTO_SCTP = 132, /* Stream Control Transport Protocol */ + IPPROTO_UDPLITE = 136, /* UDP-Lite (RFC 3828) */ + + IPPROTO_RAW = 255, /* Raw IP packets */ + IPPROTO_MAX +}; + + +/* Internet address. */ +struct in_addr { + __be32 s_addr; +}; + +#define IP_TOS 1 +#define IP_TTL 2 +#define IP_HDRINCL 3 +#define IP_OPTIONS 4 +#define IP_ROUTER_ALERT 5 +#define IP_RECVOPTS 6 +#define IP_RETOPTS 7 +#define IP_PKTINFO 8 +#define IP_PKTOPTIONS 9 +#define IP_MTU_DISCOVER 10 +#define IP_RECVERR 11 +#define IP_RECVTTL 12 +#define IP_RECVTOS 13 +#define IP_MTU 14 +#define IP_FREEBIND 15 +#define IP_IPSEC_POLICY 16 +#define IP_XFRM_POLICY 17 +#define IP_PASSSEC 18 +#define IP_TRANSPARENT 19 + +/* BSD compatibility */ +#define IP_RECVRETOPTS IP_RETOPTS + +/* TProxy original addresses */ +#define IP_ORIGDSTADDR 20 +#define IP_RECVORIGDSTADDR IP_ORIGDSTADDR + +#define IP_MINTTL 21 +#define IP_NODEFRAG 22 + +/* IP_MTU_DISCOVER values */ +#define IP_PMTUDISC_DONT 0 /* Never send DF frames */ +#define IP_PMTUDISC_WANT 1 /* Use per route hints */ +#define IP_PMTUDISC_DO 2 /* Always DF */ +#define IP_PMTUDISC_PROBE 3 /* Ignore dst pmtu */ + +#define IP_MULTICAST_IF 32 +#define IP_MULTICAST_TTL 33 +#define IP_MULTICAST_LOOP 34 +#define IP_ADD_MEMBERSHIP 35 +#define IP_DROP_MEMBERSHIP 36 +#define IP_UNBLOCK_SOURCE 37 +#define IP_BLOCK_SOURCE 38 +#define IP_ADD_SOURCE_MEMBERSHIP 39 +#define IP_DROP_SOURCE_MEMBERSHIP 40 +#define IP_MSFILTER 41 +#define MCAST_JOIN_GROUP 42 +#define MCAST_BLOCK_SOURCE 43 +#define MCAST_UNBLOCK_SOURCE 44 +#define MCAST_LEAVE_GROUP 45 +#define MCAST_JOIN_SOURCE_GROUP 46 +#define MCAST_LEAVE_SOURCE_GROUP 47 +#define MCAST_MSFILTER 48 +#define IP_MULTICAST_ALL 49 +#define IP_UNICAST_IF 50 + +#define MCAST_EXCLUDE 0 +#define MCAST_INCLUDE 1 + +/* These need to appear somewhere around here */ +#define IP_DEFAULT_MULTICAST_TTL 1 +#define IP_DEFAULT_MULTICAST_LOOP 1 + +/* Request struct for multicast socket ops */ + +struct ip_mreq { + struct in_addr imr_multiaddr; /* IP multicast address of group */ + struct in_addr imr_interface; /* local IP address of interface */ +}; + +struct ip_mreqn { + struct in_addr imr_multiaddr; /* IP multicast address of group */ + struct in_addr imr_address; /* local IP address of interface */ + int imr_ifindex; /* Interface index */ +}; + +struct ip_mreq_source { + __be32 imr_multiaddr; + __be32 imr_interface; + __be32 imr_sourceaddr; +}; + +struct ip_msfilter { + __be32 imsf_multiaddr; + __be32 imsf_interface; + __u32 imsf_fmode; + __u32 imsf_numsrc; + __be32 imsf_slist[1]; +}; + +#define IP_MSFILTER_SIZE(numsrc) \ + (sizeof(struct ip_msfilter) - sizeof(__u32) \ + + (numsrc) * sizeof(__u32)) + +struct group_req { + __u32 gr_interface; /* interface index */ + struct __kernel_sockaddr_storage gr_group; /* group address */ +}; + +struct group_source_req { + __u32 gsr_interface; /* interface index */ + struct __kernel_sockaddr_storage gsr_group; /* group address */ + struct __kernel_sockaddr_storage gsr_source; /* source address */ +}; + +struct group_filter { + __u32 gf_interface; /* interface index */ + struct __kernel_sockaddr_storage gf_group; /* multicast address */ + __u32 gf_fmode; /* filter mode */ + __u32 gf_numsrc; /* number of sources */ + struct __kernel_sockaddr_storage gf_slist[1]; /* interface index */ +}; + +#define GROUP_FILTER_SIZE(numsrc) \ + (sizeof(struct group_filter) - sizeof(struct __kernel_sockaddr_storage) \ + + (numsrc) * sizeof(struct __kernel_sockaddr_storage)) + +struct in_pktinfo { + int ipi_ifindex; + struct in_addr ipi_spec_dst; + struct in_addr ipi_addr; +}; + +/* Structure describing an Internet (IP) socket address. */ +#define __SOCK_SIZE__ 16 /* sizeof(struct sockaddr) */ +struct sockaddr_in { + __kernel_sa_family_t sin_family; /* Address family */ + __be16 sin_port; /* Port number */ + struct in_addr sin_addr; /* Internet address */ + + /* Pad to size of `struct sockaddr'. */ + unsigned char __pad[__SOCK_SIZE__ - sizeof(short int) - + sizeof(unsigned short int) - sizeof(struct in_addr)]; +}; +#define sin_zero __pad /* for BSD UNIX comp. -FvK */ + + +/* + * Definitions of the bits in an Internet address integer. + * On subnets, host and network parts are found according + * to the subnet mask, not these masks. + */ +#define IN_CLASSA(a) ((((long int) (a)) & 0x80000000) == 0) +#define IN_CLASSA_NET 0xff000000 +#define IN_CLASSA_NSHIFT 24 +#define IN_CLASSA_HOST (0xffffffff & ~IN_CLASSA_NET) +#define IN_CLASSA_MAX 128 + +#define IN_CLASSB(a) ((((long int) (a)) & 0xc0000000) == 0x80000000) +#define IN_CLASSB_NET 0xffff0000 +#define IN_CLASSB_NSHIFT 16 +#define IN_CLASSB_HOST (0xffffffff & ~IN_CLASSB_NET) +#define IN_CLASSB_MAX 65536 + +#define IN_CLASSC(a) ((((long int) (a)) & 0xe0000000) == 0xc0000000) +#define IN_CLASSC_NET 0xffffff00 +#define IN_CLASSC_NSHIFT 8 +#define IN_CLASSC_HOST (0xffffffff & ~IN_CLASSC_NET) + +#define IN_CLASSD(a) ((((long int) (a)) & 0xf0000000) == 0xe0000000) +#define IN_MULTICAST(a) IN_CLASSD(a) +#define IN_MULTICAST_NET 0xF0000000 + +#define IN_EXPERIMENTAL(a) ((((long int) (a)) & 0xf0000000) == 0xf0000000) +#define IN_BADCLASS(a) IN_EXPERIMENTAL((a)) + +/* Address to accept any incoming messages. */ +#define INADDR_ANY ((unsigned long int) 0x00000000) + +/* Address to send to all hosts. */ +#define INADDR_BROADCAST ((unsigned long int) 0xffffffff) + +/* Address indicating an error return. */ +#define INADDR_NONE ((unsigned long int) 0xffffffff) + +/* Network number for local host loopback. */ +#define IN_LOOPBACKNET 127 + +/* Address to loopback in software to local host. */ +#define INADDR_LOOPBACK 0x7f000001 /* 127.0.0.1 */ +#define IN_LOOPBACK(a) ((((long int) (a)) & 0xff000000) == 0x7f000000) + +/* Defines for Multicast INADDR */ +#define INADDR_UNSPEC_GROUP 0xe0000000U /* 224.0.0.0 */ +#define INADDR_ALLHOSTS_GROUP 0xe0000001U /* 224.0.0.1 */ +#define INADDR_ALLRTRS_GROUP 0xe0000002U /* 224.0.0.2 */ +#define INADDR_MAX_LOCAL_GROUP 0xe00000ffU /* 224.0.0.255 */ + + +/* <asm/byteorder.h> contains the htonl type stuff.. */ +#include <asm/byteorder.h> + + +#endif /* _UAPI_LINUX_IN_H */ diff --git a/include/uapi/linux/in6.h b/include/uapi/linux/in6.h new file mode 100644 index 00000000000..1e315998995 --- /dev/null +++ b/include/uapi/linux/in6.h @@ -0,0 +1,279 @@ +/* + * Types and definitions for AF_INET6 + * Linux INET6 implementation + * + * Authors: + * Pedro Roque <roque@di.fc.ul.pt> + * + * Sources: + * IPv6 Program Interfaces for BSD Systems + * <draft-ietf-ipngwg-bsd-api-05.txt> + * + * Advanced Sockets API for IPv6 + * <draft-stevens-advanced-api-00.txt> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _UAPI_LINUX_IN6_H +#define _UAPI_LINUX_IN6_H + +#include <linux/types.h> + +/* + * IPv6 address structure + */ + +struct in6_addr { + union { + __u8 u6_addr8[16]; + __be16 u6_addr16[8]; + __be32 u6_addr32[4]; + } in6_u; +#define s6_addr in6_u.u6_addr8 +#define s6_addr16 in6_u.u6_addr16 +#define s6_addr32 in6_u.u6_addr32 +}; + +/* IPv6 Wildcard Address (::) and Loopback Address (::1) defined in RFC2553 + * NOTE: Be aware the IN6ADDR_* constants and in6addr_* externals are defined + * in network byte order, not in host byte order as are the IPv4 equivalents + */ + +struct sockaddr_in6 { + unsigned short int sin6_family; /* AF_INET6 */ + __be16 sin6_port; /* Transport layer port # */ + __be32 sin6_flowinfo; /* IPv6 flow information */ + struct in6_addr sin6_addr; /* IPv6 address */ + __u32 sin6_scope_id; /* scope id (new in RFC2553) */ +}; + +struct ipv6_mreq { + /* IPv6 multicast address of group */ + struct in6_addr ipv6mr_multiaddr; + + /* local IPv6 address of interface */ + int ipv6mr_ifindex; +}; + +#define ipv6mr_acaddr ipv6mr_multiaddr + +struct in6_flowlabel_req { + struct in6_addr flr_dst; + __be32 flr_label; + __u8 flr_action; + __u8 flr_share; + __u16 flr_flags; + __u16 flr_expires; + __u16 flr_linger; + __u32 __flr_pad; + /* Options in format of IPV6_PKTOPTIONS */ +}; + +#define IPV6_FL_A_GET 0 +#define IPV6_FL_A_PUT 1 +#define IPV6_FL_A_RENEW 2 + +#define IPV6_FL_F_CREATE 1 +#define IPV6_FL_F_EXCL 2 + +#define IPV6_FL_S_NONE 0 +#define IPV6_FL_S_EXCL 1 +#define IPV6_FL_S_PROCESS 2 +#define IPV6_FL_S_USER 3 +#define IPV6_FL_S_ANY 255 + + +/* + * Bitmask constant declarations to help applications select out the + * flow label and priority fields. + * + * Note that this are in host byte order while the flowinfo field of + * sockaddr_in6 is in network byte order. + */ + +#define IPV6_FLOWINFO_FLOWLABEL 0x000fffff +#define IPV6_FLOWINFO_PRIORITY 0x0ff00000 + +/* These definitions are obsolete */ +#define IPV6_PRIORITY_UNCHARACTERIZED 0x0000 +#define IPV6_PRIORITY_FILLER 0x0100 +#define IPV6_PRIORITY_UNATTENDED 0x0200 +#define IPV6_PRIORITY_RESERVED1 0x0300 +#define IPV6_PRIORITY_BULK 0x0400 +#define IPV6_PRIORITY_RESERVED2 0x0500 +#define IPV6_PRIORITY_INTERACTIVE 0x0600 +#define IPV6_PRIORITY_CONTROL 0x0700 +#define IPV6_PRIORITY_8 0x0800 +#define IPV6_PRIORITY_9 0x0900 +#define IPV6_PRIORITY_10 0x0a00 +#define IPV6_PRIORITY_11 0x0b00 +#define IPV6_PRIORITY_12 0x0c00 +#define IPV6_PRIORITY_13 0x0d00 +#define IPV6_PRIORITY_14 0x0e00 +#define IPV6_PRIORITY_15 0x0f00 + +/* + * IPV6 extension headers + */ +#define IPPROTO_HOPOPTS 0 /* IPv6 hop-by-hop options */ +#define IPPROTO_ROUTING 43 /* IPv6 routing header */ +#define IPPROTO_FRAGMENT 44 /* IPv6 fragmentation header */ +#define IPPROTO_ICMPV6 58 /* ICMPv6 */ +#define IPPROTO_NONE 59 /* IPv6 no next header */ +#define IPPROTO_DSTOPTS 60 /* IPv6 destination options */ +#define IPPROTO_MH 135 /* IPv6 mobility header */ + +/* + * IPv6 TLV options. + */ +#define IPV6_TLV_PAD1 0 +#define IPV6_TLV_PADN 1 +#define IPV6_TLV_ROUTERALERT 5 +#define IPV6_TLV_JUMBO 194 +#define IPV6_TLV_HAO 201 /* home address option */ + +/* + * IPV6 socket options + */ + +#define IPV6_ADDRFORM 1 +#define IPV6_2292PKTINFO 2 +#define IPV6_2292HOPOPTS 3 +#define IPV6_2292DSTOPTS 4 +#define IPV6_2292RTHDR 5 +#define IPV6_2292PKTOPTIONS 6 +#define IPV6_CHECKSUM 7 +#define IPV6_2292HOPLIMIT 8 +#define IPV6_NEXTHOP 9 +#define IPV6_AUTHHDR 10 /* obsolete */ +#define IPV6_FLOWINFO 11 + +#define IPV6_UNICAST_HOPS 16 +#define IPV6_MULTICAST_IF 17 +#define IPV6_MULTICAST_HOPS 18 +#define IPV6_MULTICAST_LOOP 19 +#define IPV6_ADD_MEMBERSHIP 20 +#define IPV6_DROP_MEMBERSHIP 21 +#define IPV6_ROUTER_ALERT 22 +#define IPV6_MTU_DISCOVER 23 +#define IPV6_MTU 24 +#define IPV6_RECVERR 25 +#define IPV6_V6ONLY 26 +#define IPV6_JOIN_ANYCAST 27 +#define IPV6_LEAVE_ANYCAST 28 + +/* IPV6_MTU_DISCOVER values */ +#define IPV6_PMTUDISC_DONT 0 +#define IPV6_PMTUDISC_WANT 1 +#define IPV6_PMTUDISC_DO 2 +#define IPV6_PMTUDISC_PROBE 3 + +/* Flowlabel */ +#define IPV6_FLOWLABEL_MGR 32 +#define IPV6_FLOWINFO_SEND 33 + +#define IPV6_IPSEC_POLICY 34 +#define IPV6_XFRM_POLICY 35 + +/* + * Multicast: + * Following socket options are shared between IPv4 and IPv6. + * + * MCAST_JOIN_GROUP 42 + * MCAST_BLOCK_SOURCE 43 + * MCAST_UNBLOCK_SOURCE 44 + * MCAST_LEAVE_GROUP 45 + * MCAST_JOIN_SOURCE_GROUP 46 + * MCAST_LEAVE_SOURCE_GROUP 47 + * MCAST_MSFILTER 48 + */ + +/* + * Advanced API (RFC3542) (1) + * + * Note: IPV6_RECVRTHDRDSTOPTS does not exist. see net/ipv6/datagram.c. + */ + +#define IPV6_RECVPKTINFO 49 +#define IPV6_PKTINFO 50 +#define IPV6_RECVHOPLIMIT 51 +#define IPV6_HOPLIMIT 52 +#define IPV6_RECVHOPOPTS 53 +#define IPV6_HOPOPTS 54 +#define IPV6_RTHDRDSTOPTS 55 +#define IPV6_RECVRTHDR 56 +#define IPV6_RTHDR 57 +#define IPV6_RECVDSTOPTS 58 +#define IPV6_DSTOPTS 59 +#define IPV6_RECVPATHMTU 60 +#define IPV6_PATHMTU 61 +#define IPV6_DONTFRAG 62 +#if 0 /* not yet */ +#define IPV6_USE_MIN_MTU 63 +#endif + +/* + * Netfilter (1) + * + * Following socket options are used in ip6_tables; + * see include/linux/netfilter_ipv6/ip6_tables.h. + * + * IP6T_SO_SET_REPLACE / IP6T_SO_GET_INFO 64 + * IP6T_SO_SET_ADD_COUNTERS / IP6T_SO_GET_ENTRIES 65 + */ + +/* + * Advanced API (RFC3542) (2) + */ +#define IPV6_RECVTCLASS 66 +#define IPV6_TCLASS 67 + +/* + * Netfilter (2) + * + * Following socket options are used in ip6_tables; + * see include/linux/netfilter_ipv6/ip6_tables.h. + * + * IP6T_SO_GET_REVISION_MATCH 68 + * IP6T_SO_GET_REVISION_TARGET 69 + */ + +/* RFC5014: Source address selection */ +#define IPV6_ADDR_PREFERENCES 72 + +#define IPV6_PREFER_SRC_TMP 0x0001 +#define IPV6_PREFER_SRC_PUBLIC 0x0002 +#define IPV6_PREFER_SRC_PUBTMP_DEFAULT 0x0100 +#define IPV6_PREFER_SRC_COA 0x0004 +#define IPV6_PREFER_SRC_HOME 0x0400 +#define IPV6_PREFER_SRC_CGA 0x0008 +#define IPV6_PREFER_SRC_NONCGA 0x0800 + +/* RFC5082: Generalized Ttl Security Mechanism */ +#define IPV6_MINHOPCOUNT 73 + +#define IPV6_ORIGDSTADDR 74 +#define IPV6_RECVORIGDSTADDR IPV6_ORIGDSTADDR +#define IPV6_TRANSPARENT 75 +#define IPV6_UNICAST_IF 76 + +/* + * Multicast Routing: + * see include/linux/mroute6.h. + * + * MRT6_INIT 200 + * MRT6_DONE 201 + * MRT6_ADD_MIF 202 + * MRT6_DEL_MIF 203 + * MRT6_ADD_MFC 204 + * MRT6_DEL_MFC 205 + * MRT6_VERSION 206 + * MRT6_ASSERT 207 + * MRT6_PIM 208 + * (reserved) 209 + */ +#endif /* _UAPI_LINUX_IN6_H */ diff --git a/include/linux/in_route.h b/include/uapi/linux/in_route.h index b261b8c915f..b261b8c915f 100644 --- a/include/linux/in_route.h +++ b/include/uapi/linux/in_route.h diff --git a/include/uapi/linux/inet_diag.h b/include/uapi/linux/inet_diag.h new file mode 100644 index 00000000000..8c469af939a --- /dev/null +++ b/include/uapi/linux/inet_diag.h @@ -0,0 +1,136 @@ +#ifndef _UAPI_INET_DIAG_H_ +#define _UAPI_INET_DIAG_H_ + +#include <linux/types.h> + +/* Just some random number */ +#define TCPDIAG_GETSOCK 18 +#define DCCPDIAG_GETSOCK 19 + +#define INET_DIAG_GETSOCK_MAX 24 + +/* Socket identity */ +struct inet_diag_sockid { + __be16 idiag_sport; + __be16 idiag_dport; + __be32 idiag_src[4]; + __be32 idiag_dst[4]; + __u32 idiag_if; + __u32 idiag_cookie[2]; +#define INET_DIAG_NOCOOKIE (~0U) +}; + +/* Request structure */ + +struct inet_diag_req { + __u8 idiag_family; /* Family of addresses. */ + __u8 idiag_src_len; + __u8 idiag_dst_len; + __u8 idiag_ext; /* Query extended information */ + + struct inet_diag_sockid id; + + __u32 idiag_states; /* States to dump */ + __u32 idiag_dbs; /* Tables to dump (NI) */ +}; + +struct inet_diag_req_v2 { + __u8 sdiag_family; + __u8 sdiag_protocol; + __u8 idiag_ext; + __u8 pad; + __u32 idiag_states; + struct inet_diag_sockid id; +}; + +enum { + INET_DIAG_REQ_NONE, + INET_DIAG_REQ_BYTECODE, +}; + +#define INET_DIAG_REQ_MAX INET_DIAG_REQ_BYTECODE + +/* Bytecode is sequence of 4 byte commands followed by variable arguments. + * All the commands identified by "code" are conditional jumps forward: + * to offset cc+"yes" or to offset cc+"no". "yes" is supposed to be + * length of the command and its arguments. + */ + +struct inet_diag_bc_op { + unsigned char code; + unsigned char yes; + unsigned short no; +}; + +enum { + INET_DIAG_BC_NOP, + INET_DIAG_BC_JMP, + INET_DIAG_BC_S_GE, + INET_DIAG_BC_S_LE, + INET_DIAG_BC_D_GE, + INET_DIAG_BC_D_LE, + INET_DIAG_BC_AUTO, + INET_DIAG_BC_S_COND, + INET_DIAG_BC_D_COND, +}; + +struct inet_diag_hostcond { + __u8 family; + __u8 prefix_len; + int port; + __be32 addr[0]; +}; + +/* Base info structure. It contains socket identity (addrs/ports/cookie) + * and, alas, the information shown by netstat. */ +struct inet_diag_msg { + __u8 idiag_family; + __u8 idiag_state; + __u8 idiag_timer; + __u8 idiag_retrans; + + struct inet_diag_sockid id; + + __u32 idiag_expires; + __u32 idiag_rqueue; + __u32 idiag_wqueue; + __u32 idiag_uid; + __u32 idiag_inode; +}; + +/* Extensions */ + +enum { + INET_DIAG_NONE, + INET_DIAG_MEMINFO, + INET_DIAG_INFO, + INET_DIAG_VEGASINFO, + INET_DIAG_CONG, + INET_DIAG_TOS, + INET_DIAG_TCLASS, + INET_DIAG_SKMEMINFO, +}; + +#define INET_DIAG_MAX INET_DIAG_SKMEMINFO + + +/* INET_DIAG_MEM */ + +struct inet_diag_meminfo { + __u32 idiag_rmem; + __u32 idiag_wmem; + __u32 idiag_fmem; + __u32 idiag_tmem; +}; + +/* INET_DIAG_VEGASINFO */ + +struct tcpvegas_info { + __u32 tcpv_enabled; + __u32 tcpv_rttcnt; + __u32 tcpv_rtt; + __u32 tcpv_minrtt; +}; + + +#endif /* _UAPI_INET_DIAG_H_ */ diff --git a/include/uapi/linux/inotify.h b/include/uapi/linux/inotify.h new file mode 100644 index 00000000000..e6bf35b2dd3 --- /dev/null +++ b/include/uapi/linux/inotify.h @@ -0,0 +1,74 @@ +/* + * Inode based directory notification for Linux + * + * Copyright (C) 2005 John McCutchan + */ + +#ifndef _UAPI_LINUX_INOTIFY_H +#define _UAPI_LINUX_INOTIFY_H + +/* For O_CLOEXEC and O_NONBLOCK */ +#include <linux/fcntl.h> +#include <linux/types.h> + +/* + * struct inotify_event - structure read from the inotify device for each event + * + * When you are watching a directory, you will receive the filename for events + * such as IN_CREATE, IN_DELETE, IN_OPEN, IN_CLOSE, ..., relative to the wd. + */ +struct inotify_event { + __s32 wd; /* watch descriptor */ + __u32 mask; /* watch mask */ + __u32 cookie; /* cookie to synchronize two events */ + __u32 len; /* length (including nulls) of name */ + char name[0]; /* stub for possible name */ +}; + +/* the following are legal, implemented events that user-space can watch for */ +#define IN_ACCESS 0x00000001 /* File was accessed */ +#define IN_MODIFY 0x00000002 /* File was modified */ +#define IN_ATTRIB 0x00000004 /* Metadata changed */ +#define IN_CLOSE_WRITE 0x00000008 /* Writtable file was closed */ +#define IN_CLOSE_NOWRITE 0x00000010 /* Unwrittable file closed */ +#define IN_OPEN 0x00000020 /* File was opened */ +#define IN_MOVED_FROM 0x00000040 /* File was moved from X */ +#define IN_MOVED_TO 0x00000080 /* File was moved to Y */ +#define IN_CREATE 0x00000100 /* Subfile was created */ +#define IN_DELETE 0x00000200 /* Subfile was deleted */ +#define IN_DELETE_SELF 0x00000400 /* Self was deleted */ +#define IN_MOVE_SELF 0x00000800 /* Self was moved */ + +/* the following are legal events. they are sent as needed to any watch */ +#define IN_UNMOUNT 0x00002000 /* Backing fs was unmounted */ +#define IN_Q_OVERFLOW 0x00004000 /* Event queued overflowed */ +#define IN_IGNORED 0x00008000 /* File was ignored */ + +/* helper events */ +#define IN_CLOSE (IN_CLOSE_WRITE | IN_CLOSE_NOWRITE) /* close */ +#define IN_MOVE (IN_MOVED_FROM | IN_MOVED_TO) /* moves */ + +/* special flags */ +#define IN_ONLYDIR 0x01000000 /* only watch the path if it is a directory */ +#define IN_DONT_FOLLOW 0x02000000 /* don't follow a sym link */ +#define IN_EXCL_UNLINK 0x04000000 /* exclude events on unlinked objects */ +#define IN_MASK_ADD 0x20000000 /* add to the mask of an already existing watch */ +#define IN_ISDIR 0x40000000 /* event occurred against dir */ +#define IN_ONESHOT 0x80000000 /* only send event once */ + +/* + * All of the events - we build the list by hand so that we can add flags in + * the future and not break backward compatibility. Apps will get only the + * events that they originally wanted. Be sure to add new events here! + */ +#define IN_ALL_EVENTS (IN_ACCESS | IN_MODIFY | IN_ATTRIB | IN_CLOSE_WRITE | \ + IN_CLOSE_NOWRITE | IN_OPEN | IN_MOVED_FROM | \ + IN_MOVED_TO | IN_DELETE | IN_CREATE | IN_DELETE_SELF | \ + IN_MOVE_SELF) + +/* Flags for sys_inotify_init1. */ +#define IN_CLOEXEC O_CLOEXEC +#define IN_NONBLOCK O_NONBLOCK + + +#endif /* _UAPI_LINUX_INOTIFY_H */ diff --git a/include/uapi/linux/input.h b/include/uapi/linux/input.h new file mode 100644 index 00000000000..558828590a6 --- /dev/null +++ b/include/uapi/linux/input.h @@ -0,0 +1,1153 @@ +/* + * Copyright (c) 1999-2002 Vojtech Pavlik + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#ifndef _UAPI_INPUT_H +#define _UAPI_INPUT_H + + +#ifndef __KERNEL__ +#include <sys/time.h> +#include <sys/ioctl.h> +#include <sys/types.h> +#include <linux/types.h> +#endif + + +/* + * The event structure itself + */ + +struct input_event { + struct timeval time; + __u16 type; + __u16 code; + __s32 value; +}; + +/* + * Protocol version. + */ + +#define EV_VERSION 0x010001 + +/* + * IOCTLs (0x00 - 0x7f) + */ + +struct input_id { + __u16 bustype; + __u16 vendor; + __u16 product; + __u16 version; +}; + +/** + * struct input_absinfo - used by EVIOCGABS/EVIOCSABS ioctls + * @value: latest reported value for the axis. + * @minimum: specifies minimum value for the axis. + * @maximum: specifies maximum value for the axis. + * @fuzz: specifies fuzz value that is used to filter noise from + * the event stream. + * @flat: values that are within this value will be discarded by + * joydev interface and reported as 0 instead. + * @resolution: specifies resolution for the values reported for + * the axis. + * + * Note that input core does not clamp reported values to the + * [minimum, maximum] limits, such task is left to userspace. + * + * Resolution for main axes (ABS_X, ABS_Y, ABS_Z) is reported in + * units per millimeter (units/mm), resolution for rotational axes + * (ABS_RX, ABS_RY, ABS_RZ) is reported in units per radian. + */ +struct input_absinfo { + __s32 value; + __s32 minimum; + __s32 maximum; + __s32 fuzz; + __s32 flat; + __s32 resolution; +}; + +/** + * struct input_keymap_entry - used by EVIOCGKEYCODE/EVIOCSKEYCODE ioctls + * @scancode: scancode represented in machine-endian form. + * @len: length of the scancode that resides in @scancode buffer. + * @index: index in the keymap, may be used instead of scancode + * @flags: allows to specify how kernel should handle the request. For + * example, setting INPUT_KEYMAP_BY_INDEX flag indicates that kernel + * should perform lookup in keymap by @index instead of @scancode + * @keycode: key code assigned to this scancode + * + * The structure is used to retrieve and modify keymap data. Users have + * option of performing lookup either by @scancode itself or by @index + * in keymap entry. EVIOCGKEYCODE will also return scancode or index + * (depending on which element was used to perform lookup). + */ +struct input_keymap_entry { +#define INPUT_KEYMAP_BY_INDEX (1 << 0) + __u8 flags; + __u8 len; + __u16 index; + __u32 keycode; + __u8 scancode[32]; +}; + +#define EVIOCGVERSION _IOR('E', 0x01, int) /* get driver version */ +#define EVIOCGID _IOR('E', 0x02, struct input_id) /* get device ID */ +#define EVIOCGREP _IOR('E', 0x03, unsigned int[2]) /* get repeat settings */ +#define EVIOCSREP _IOW('E', 0x03, unsigned int[2]) /* set repeat settings */ + +#define EVIOCGKEYCODE _IOR('E', 0x04, unsigned int[2]) /* get keycode */ +#define EVIOCGKEYCODE_V2 _IOR('E', 0x04, struct input_keymap_entry) +#define EVIOCSKEYCODE _IOW('E', 0x04, unsigned int[2]) /* set keycode */ +#define EVIOCSKEYCODE_V2 _IOW('E', 0x04, struct input_keymap_entry) + +#define EVIOCGNAME(len) _IOC(_IOC_READ, 'E', 0x06, len) /* get device name */ +#define EVIOCGPHYS(len) _IOC(_IOC_READ, 'E', 0x07, len) /* get physical location */ +#define EVIOCGUNIQ(len) _IOC(_IOC_READ, 'E', 0x08, len) /* get unique identifier */ +#define EVIOCGPROP(len) _IOC(_IOC_READ, 'E', 0x09, len) /* get device properties */ + +/** + * EVIOCGMTSLOTS(len) - get MT slot values + * @len: size of the data buffer in bytes + * + * The ioctl buffer argument should be binary equivalent to + * + * struct input_mt_request_layout { + * __u32 code; + * __s32 values[num_slots]; + * }; + * + * where num_slots is the (arbitrary) number of MT slots to extract. + * + * The ioctl size argument (len) is the size of the buffer, which + * should satisfy len = (num_slots + 1) * sizeof(__s32). If len is + * too small to fit all available slots, the first num_slots are + * returned. + * + * Before the call, code is set to the wanted ABS_MT event type. On + * return, values[] is filled with the slot values for the specified + * ABS_MT code. + * + * If the request code is not an ABS_MT value, -EINVAL is returned. + */ +#define EVIOCGMTSLOTS(len) _IOC(_IOC_READ, 'E', 0x0a, len) + +#define EVIOCGKEY(len) _IOC(_IOC_READ, 'E', 0x18, len) /* get global key state */ +#define EVIOCGLED(len) _IOC(_IOC_READ, 'E', 0x19, len) /* get all LEDs */ +#define EVIOCGSND(len) _IOC(_IOC_READ, 'E', 0x1a, len) /* get all sounds status */ +#define EVIOCGSW(len) _IOC(_IOC_READ, 'E', 0x1b, len) /* get all switch states */ + +#define EVIOCGBIT(ev,len) _IOC(_IOC_READ, 'E', 0x20 + (ev), len) /* get event bits */ +#define EVIOCGABS(abs) _IOR('E', 0x40 + (abs), struct input_absinfo) /* get abs value/limits */ +#define EVIOCSABS(abs) _IOW('E', 0xc0 + (abs), struct input_absinfo) /* set abs value/limits */ + +#define EVIOCSFF _IOC(_IOC_WRITE, 'E', 0x80, sizeof(struct ff_effect)) /* send a force effect to a force feedback device */ +#define EVIOCRMFF _IOW('E', 0x81, int) /* Erase a force effect */ +#define EVIOCGEFFECTS _IOR('E', 0x84, int) /* Report number of effects playable at the same time */ + +#define EVIOCGRAB _IOW('E', 0x90, int) /* Grab/Release device */ + +#define EVIOCSCLOCKID _IOW('E', 0xa0, int) /* Set clockid to be used for timestamps */ + +/* + * Device properties and quirks + */ + +#define INPUT_PROP_POINTER 0x00 /* needs a pointer */ +#define INPUT_PROP_DIRECT 0x01 /* direct input devices */ +#define INPUT_PROP_BUTTONPAD 0x02 /* has button(s) under pad */ +#define INPUT_PROP_SEMI_MT 0x03 /* touch rectangle only */ + +#define INPUT_PROP_MAX 0x1f +#define INPUT_PROP_CNT (INPUT_PROP_MAX + 1) + +/* + * Event types + */ + +#define EV_SYN 0x00 +#define EV_KEY 0x01 +#define EV_REL 0x02 +#define EV_ABS 0x03 +#define EV_MSC 0x04 +#define EV_SW 0x05 +#define EV_LED 0x11 +#define EV_SND 0x12 +#define EV_REP 0x14 +#define EV_FF 0x15 +#define EV_PWR 0x16 +#define EV_FF_STATUS 0x17 +#define EV_MAX 0x1f +#define EV_CNT (EV_MAX+1) + +/* + * Synchronization events. + */ + +#define SYN_REPORT 0 +#define SYN_CONFIG 1 +#define SYN_MT_REPORT 2 +#define SYN_DROPPED 3 + +/* + * Keys and buttons + * + * Most of the keys/buttons are modeled after USB HUT 1.12 + * (see http://www.usb.org/developers/hidpage). + * Abbreviations in the comments: + * AC - Application Control + * AL - Application Launch Button + * SC - System Control + */ + +#define KEY_RESERVED 0 +#define KEY_ESC 1 +#define KEY_1 2 +#define KEY_2 3 +#define KEY_3 4 +#define KEY_4 5 +#define KEY_5 6 +#define KEY_6 7 +#define KEY_7 8 +#define KEY_8 9 +#define KEY_9 10 +#define KEY_0 11 +#define KEY_MINUS 12 +#define KEY_EQUAL 13 +#define KEY_BACKSPACE 14 +#define KEY_TAB 15 +#define KEY_Q 16 +#define KEY_W 17 +#define KEY_E 18 +#define KEY_R 19 +#define KEY_T 20 +#define KEY_Y 21 +#define KEY_U 22 +#define KEY_I 23 +#define KEY_O 24 +#define KEY_P 25 +#define KEY_LEFTBRACE 26 +#define KEY_RIGHTBRACE 27 +#define KEY_ENTER 28 +#define KEY_LEFTCTRL 29 +#define KEY_A 30 +#define KEY_S 31 +#define KEY_D 32 +#define KEY_F 33 +#define KEY_G 34 +#define KEY_H 35 +#define KEY_J 36 +#define KEY_K 37 +#define KEY_L 38 +#define KEY_SEMICOLON 39 +#define KEY_APOSTROPHE 40 +#define KEY_GRAVE 41 +#define KEY_LEFTSHIFT 42 +#define KEY_BACKSLASH 43 +#define KEY_Z 44 +#define KEY_X 45 +#define KEY_C 46 +#define KEY_V 47 +#define KEY_B 48 +#define KEY_N 49 +#define KEY_M 50 +#define KEY_COMMA 51 +#define KEY_DOT 52 +#define KEY_SLASH 53 +#define KEY_RIGHTSHIFT 54 +#define KEY_KPASTERISK 55 +#define KEY_LEFTALT 56 +#define KEY_SPACE 57 +#define KEY_CAPSLOCK 58 +#define KEY_F1 59 +#define KEY_F2 60 +#define KEY_F3 61 +#define KEY_F4 62 +#define KEY_F5 63 +#define KEY_F6 64 +#define KEY_F7 65 +#define KEY_F8 66 +#define KEY_F9 67 +#define KEY_F10 68 +#define KEY_NUMLOCK 69 +#define KEY_SCROLLLOCK 70 +#define KEY_KP7 71 +#define KEY_KP8 72 +#define KEY_KP9 73 +#define KEY_KPMINUS 74 +#define KEY_KP4 75 +#define KEY_KP5 76 +#define KEY_KP6 77 +#define KEY_KPPLUS 78 +#define KEY_KP1 79 +#define KEY_KP2 80 +#define KEY_KP3 81 +#define KEY_KP0 82 +#define KEY_KPDOT 83 + +#define KEY_ZENKAKUHANKAKU 85 +#define KEY_102ND 86 +#define KEY_F11 87 +#define KEY_F12 88 +#define KEY_RO 89 +#define KEY_KATAKANA 90 +#define KEY_HIRAGANA 91 +#define KEY_HENKAN 92 +#define KEY_KATAKANAHIRAGANA 93 +#define KEY_MUHENKAN 94 +#define KEY_KPJPCOMMA 95 +#define KEY_KPENTER 96 +#define KEY_RIGHTCTRL 97 +#define KEY_KPSLASH 98 +#define KEY_SYSRQ 99 +#define KEY_RIGHTALT 100 +#define KEY_LINEFEED 101 +#define KEY_HOME 102 +#define KEY_UP 103 +#define KEY_PAGEUP 104 +#define KEY_LEFT 105 +#define KEY_RIGHT 106 +#define KEY_END 107 +#define KEY_DOWN 108 +#define KEY_PAGEDOWN 109 +#define KEY_INSERT 110 +#define KEY_DELETE 111 +#define KEY_MACRO 112 +#define KEY_MUTE 113 +#define KEY_VOLUMEDOWN 114 +#define KEY_VOLUMEUP 115 +#define KEY_POWER 116 /* SC System Power Down */ +#define KEY_KPEQUAL 117 +#define KEY_KPPLUSMINUS 118 +#define KEY_PAUSE 119 +#define KEY_SCALE 120 /* AL Compiz Scale (Expose) */ + +#define KEY_KPCOMMA 121 +#define KEY_HANGEUL 122 +#define KEY_HANGUEL KEY_HANGEUL +#define KEY_HANJA 123 +#define KEY_YEN 124 +#define KEY_LEFTMETA 125 +#define KEY_RIGHTMETA 126 +#define KEY_COMPOSE 127 + +#define KEY_STOP 128 /* AC Stop */ +#define KEY_AGAIN 129 +#define KEY_PROPS 130 /* AC Properties */ +#define KEY_UNDO 131 /* AC Undo */ +#define KEY_FRONT 132 +#define KEY_COPY 133 /* AC Copy */ +#define KEY_OPEN 134 /* AC Open */ +#define KEY_PASTE 135 /* AC Paste */ +#define KEY_FIND 136 /* AC Search */ +#define KEY_CUT 137 /* AC Cut */ +#define KEY_HELP 138 /* AL Integrated Help Center */ +#define KEY_MENU 139 /* Menu (show menu) */ +#define KEY_CALC 140 /* AL Calculator */ +#define KEY_SETUP 141 +#define KEY_SLEEP 142 /* SC System Sleep */ +#define KEY_WAKEUP 143 /* System Wake Up */ +#define KEY_FILE 144 /* AL Local Machine Browser */ +#define KEY_SENDFILE 145 +#define KEY_DELETEFILE 146 +#define KEY_XFER 147 +#define KEY_PROG1 148 +#define KEY_PROG2 149 +#define KEY_WWW 150 /* AL Internet Browser */ +#define KEY_MSDOS 151 +#define KEY_COFFEE 152 /* AL Terminal Lock/Screensaver */ +#define KEY_SCREENLOCK KEY_COFFEE +#define KEY_DIRECTION 153 +#define KEY_CYCLEWINDOWS 154 +#define KEY_MAIL 155 +#define KEY_BOOKMARKS 156 /* AC Bookmarks */ +#define KEY_COMPUTER 157 +#define KEY_BACK 158 /* AC Back */ +#define KEY_FORWARD 159 /* AC Forward */ +#define KEY_CLOSECD 160 +#define KEY_EJECTCD 161 +#define KEY_EJECTCLOSECD 162 +#define KEY_NEXTSONG 163 +#define KEY_PLAYPAUSE 164 +#define KEY_PREVIOUSSONG 165 +#define KEY_STOPCD 166 +#define KEY_RECORD 167 +#define KEY_REWIND 168 +#define KEY_PHONE 169 /* Media Select Telephone */ +#define KEY_ISO 170 +#define KEY_CONFIG 171 /* AL Consumer Control Configuration */ +#define KEY_HOMEPAGE 172 /* AC Home */ +#define KEY_REFRESH 173 /* AC Refresh */ +#define KEY_EXIT 174 /* AC Exit */ +#define KEY_MOVE 175 +#define KEY_EDIT 176 +#define KEY_SCROLLUP 177 +#define KEY_SCROLLDOWN 178 +#define KEY_KPLEFTPAREN 179 +#define KEY_KPRIGHTPAREN 180 +#define KEY_NEW 181 /* AC New */ +#define KEY_REDO 182 /* AC Redo/Repeat */ + +#define KEY_F13 183 +#define KEY_F14 184 +#define KEY_F15 185 +#define KEY_F16 186 +#define KEY_F17 187 +#define KEY_F18 188 +#define KEY_F19 189 +#define KEY_F20 190 +#define KEY_F21 191 +#define KEY_F22 192 +#define KEY_F23 193 +#define KEY_F24 194 + +#define KEY_PLAYCD 200 +#define KEY_PAUSECD 201 +#define KEY_PROG3 202 +#define KEY_PROG4 203 +#define KEY_DASHBOARD 204 /* AL Dashboard */ +#define KEY_SUSPEND 205 +#define KEY_CLOSE 206 /* AC Close */ +#define KEY_PLAY 207 +#define KEY_FASTFORWARD 208 +#define KEY_BASSBOOST 209 +#define KEY_PRINT 210 /* AC Print */ +#define KEY_HP 211 +#define KEY_CAMERA 212 +#define KEY_SOUND 213 +#define KEY_QUESTION 214 +#define KEY_EMAIL 215 +#define KEY_CHAT 216 +#define KEY_SEARCH 217 +#define KEY_CONNECT 218 +#define KEY_FINANCE 219 /* AL Checkbook/Finance */ +#define KEY_SPORT 220 +#define KEY_SHOP 221 +#define KEY_ALTERASE 222 +#define KEY_CANCEL 223 /* AC Cancel */ +#define KEY_BRIGHTNESSDOWN 224 +#define KEY_BRIGHTNESSUP 225 +#define KEY_MEDIA 226 + +#define KEY_SWITCHVIDEOMODE 227 /* Cycle between available video + outputs (Monitor/LCD/TV-out/etc) */ +#define KEY_KBDILLUMTOGGLE 228 +#define KEY_KBDILLUMDOWN 229 +#define KEY_KBDILLUMUP 230 + +#define KEY_SEND 231 /* AC Send */ +#define KEY_REPLY 232 /* AC Reply */ +#define KEY_FORWARDMAIL 233 /* AC Forward Msg */ +#define KEY_SAVE 234 /* AC Save */ +#define KEY_DOCUMENTS 235 + +#define KEY_BATTERY 236 + +#define KEY_BLUETOOTH 237 +#define KEY_WLAN 238 +#define KEY_UWB 239 + +#define KEY_UNKNOWN 240 + +#define KEY_VIDEO_NEXT 241 /* drive next video source */ +#define KEY_VIDEO_PREV 242 /* drive previous video source */ +#define KEY_BRIGHTNESS_CYCLE 243 /* brightness up, after max is min */ +#define KEY_BRIGHTNESS_ZERO 244 /* brightness off, use ambient */ +#define KEY_DISPLAY_OFF 245 /* display device to off state */ + +#define KEY_WIMAX 246 +#define KEY_RFKILL 247 /* Key that controls all radios */ + +#define KEY_MICMUTE 248 /* Mute / unmute the microphone */ + +/* Code 255 is reserved for special needs of AT keyboard driver */ + +#define BTN_MISC 0x100 +#define BTN_0 0x100 +#define BTN_1 0x101 +#define BTN_2 0x102 +#define BTN_3 0x103 +#define BTN_4 0x104 +#define BTN_5 0x105 +#define BTN_6 0x106 +#define BTN_7 0x107 +#define BTN_8 0x108 +#define BTN_9 0x109 + +#define BTN_MOUSE 0x110 +#define BTN_LEFT 0x110 +#define BTN_RIGHT 0x111 +#define BTN_MIDDLE 0x112 +#define BTN_SIDE 0x113 +#define BTN_EXTRA 0x114 +#define BTN_FORWARD 0x115 +#define BTN_BACK 0x116 +#define BTN_TASK 0x117 + +#define BTN_JOYSTICK 0x120 +#define BTN_TRIGGER 0x120 +#define BTN_THUMB 0x121 +#define BTN_THUMB2 0x122 +#define BTN_TOP 0x123 +#define BTN_TOP2 0x124 +#define BTN_PINKIE 0x125 +#define BTN_BASE 0x126 +#define BTN_BASE2 0x127 +#define BTN_BASE3 0x128 +#define BTN_BASE4 0x129 +#define BTN_BASE5 0x12a +#define BTN_BASE6 0x12b +#define BTN_DEAD 0x12f + +#define BTN_GAMEPAD 0x130 +#define BTN_A 0x130 +#define BTN_B 0x131 +#define BTN_C 0x132 +#define BTN_X 0x133 +#define BTN_Y 0x134 +#define BTN_Z 0x135 +#define BTN_TL 0x136 +#define BTN_TR 0x137 +#define BTN_TL2 0x138 +#define BTN_TR2 0x139 +#define BTN_SELECT 0x13a +#define BTN_START 0x13b +#define BTN_MODE 0x13c +#define BTN_THUMBL 0x13d +#define BTN_THUMBR 0x13e + +#define BTN_DIGI 0x140 +#define BTN_TOOL_PEN 0x140 +#define BTN_TOOL_RUBBER 0x141 +#define BTN_TOOL_BRUSH 0x142 +#define BTN_TOOL_PENCIL 0x143 +#define BTN_TOOL_AIRBRUSH 0x144 +#define BTN_TOOL_FINGER 0x145 +#define BTN_TOOL_MOUSE 0x146 +#define BTN_TOOL_LENS 0x147 +#define BTN_TOOL_QUINTTAP 0x148 /* Five fingers on trackpad */ +#define BTN_TOUCH 0x14a +#define BTN_STYLUS 0x14b +#define BTN_STYLUS2 0x14c +#define BTN_TOOL_DOUBLETAP 0x14d +#define BTN_TOOL_TRIPLETAP 0x14e +#define BTN_TOOL_QUADTAP 0x14f /* Four fingers on trackpad */ + +#define BTN_WHEEL 0x150 +#define BTN_GEAR_DOWN 0x150 +#define BTN_GEAR_UP 0x151 + +#define KEY_OK 0x160 +#define KEY_SELECT 0x161 +#define KEY_GOTO 0x162 +#define KEY_CLEAR 0x163 +#define KEY_POWER2 0x164 +#define KEY_OPTION 0x165 +#define KEY_INFO 0x166 /* AL OEM Features/Tips/Tutorial */ +#define KEY_TIME 0x167 +#define KEY_VENDOR 0x168 +#define KEY_ARCHIVE 0x169 +#define KEY_PROGRAM 0x16a /* Media Select Program Guide */ +#define KEY_CHANNEL 0x16b +#define KEY_FAVORITES 0x16c +#define KEY_EPG 0x16d +#define KEY_PVR 0x16e /* Media Select Home */ +#define KEY_MHP 0x16f +#define KEY_LANGUAGE 0x170 +#define KEY_TITLE 0x171 +#define KEY_SUBTITLE 0x172 +#define KEY_ANGLE 0x173 +#define KEY_ZOOM 0x174 +#define KEY_MODE 0x175 +#define KEY_KEYBOARD 0x176 +#define KEY_SCREEN 0x177 +#define KEY_PC 0x178 /* Media Select Computer */ +#define KEY_TV 0x179 /* Media Select TV */ +#define KEY_TV2 0x17a /* Media Select Cable */ +#define KEY_VCR 0x17b /* Media Select VCR */ +#define KEY_VCR2 0x17c /* VCR Plus */ +#define KEY_SAT 0x17d /* Media Select Satellite */ +#define KEY_SAT2 0x17e +#define KEY_CD 0x17f /* Media Select CD */ +#define KEY_TAPE 0x180 /* Media Select Tape */ +#define KEY_RADIO 0x181 +#define KEY_TUNER 0x182 /* Media Select Tuner */ +#define KEY_PLAYER 0x183 +#define KEY_TEXT 0x184 +#define KEY_DVD 0x185 /* Media Select DVD */ +#define KEY_AUX 0x186 +#define KEY_MP3 0x187 +#define KEY_AUDIO 0x188 /* AL Audio Browser */ +#define KEY_VIDEO 0x189 /* AL Movie Browser */ +#define KEY_DIRECTORY 0x18a +#define KEY_LIST 0x18b +#define KEY_MEMO 0x18c /* Media Select Messages */ +#define KEY_CALENDAR 0x18d +#define KEY_RED 0x18e +#define KEY_GREEN 0x18f +#define KEY_YELLOW 0x190 +#define KEY_BLUE 0x191 +#define KEY_CHANNELUP 0x192 /* Channel Increment */ +#define KEY_CHANNELDOWN 0x193 /* Channel Decrement */ +#define KEY_FIRST 0x194 +#define KEY_LAST 0x195 /* Recall Last */ +#define KEY_AB 0x196 +#define KEY_NEXT 0x197 +#define KEY_RESTART 0x198 +#define KEY_SLOW 0x199 +#define KEY_SHUFFLE 0x19a +#define KEY_BREAK 0x19b +#define KEY_PREVIOUS 0x19c +#define KEY_DIGITS 0x19d +#define KEY_TEEN 0x19e +#define KEY_TWEN 0x19f +#define KEY_VIDEOPHONE 0x1a0 /* Media Select Video Phone */ +#define KEY_GAMES 0x1a1 /* Media Select Games */ +#define KEY_ZOOMIN 0x1a2 /* AC Zoom In */ +#define KEY_ZOOMOUT 0x1a3 /* AC Zoom Out */ +#define KEY_ZOOMRESET 0x1a4 /* AC Zoom */ +#define KEY_WORDPROCESSOR 0x1a5 /* AL Word Processor */ +#define KEY_EDITOR 0x1a6 /* AL Text Editor */ +#define KEY_SPREADSHEET 0x1a7 /* AL Spreadsheet */ +#define KEY_GRAPHICSEDITOR 0x1a8 /* AL Graphics Editor */ +#define KEY_PRESENTATION 0x1a9 /* AL Presentation App */ +#define KEY_DATABASE 0x1aa /* AL Database App */ +#define KEY_NEWS 0x1ab /* AL Newsreader */ +#define KEY_VOICEMAIL 0x1ac /* AL Voicemail */ +#define KEY_ADDRESSBOOK 0x1ad /* AL Contacts/Address Book */ +#define KEY_MESSENGER 0x1ae /* AL Instant Messaging */ +#define KEY_DISPLAYTOGGLE 0x1af /* Turn display (LCD) on and off */ +#define KEY_SPELLCHECK 0x1b0 /* AL Spell Check */ +#define KEY_LOGOFF 0x1b1 /* AL Logoff */ + +#define KEY_DOLLAR 0x1b2 +#define KEY_EURO 0x1b3 + +#define KEY_FRAMEBACK 0x1b4 /* Consumer - transport controls */ +#define KEY_FRAMEFORWARD 0x1b5 +#define KEY_CONTEXT_MENU 0x1b6 /* GenDesc - system context menu */ +#define KEY_MEDIA_REPEAT 0x1b7 /* Consumer - transport control */ +#define KEY_10CHANNELSUP 0x1b8 /* 10 channels up (10+) */ +#define KEY_10CHANNELSDOWN 0x1b9 /* 10 channels down (10-) */ +#define KEY_IMAGES 0x1ba /* AL Image Browser */ + +#define KEY_DEL_EOL 0x1c0 +#define KEY_DEL_EOS 0x1c1 +#define KEY_INS_LINE 0x1c2 +#define KEY_DEL_LINE 0x1c3 + +#define KEY_FN 0x1d0 +#define KEY_FN_ESC 0x1d1 +#define KEY_FN_F1 0x1d2 +#define KEY_FN_F2 0x1d3 +#define KEY_FN_F3 0x1d4 +#define KEY_FN_F4 0x1d5 +#define KEY_FN_F5 0x1d6 +#define KEY_FN_F6 0x1d7 +#define KEY_FN_F7 0x1d8 +#define KEY_FN_F8 0x1d9 +#define KEY_FN_F9 0x1da +#define KEY_FN_F10 0x1db +#define KEY_FN_F11 0x1dc +#define KEY_FN_F12 0x1dd +#define KEY_FN_1 0x1de +#define KEY_FN_2 0x1df +#define KEY_FN_D 0x1e0 +#define KEY_FN_E 0x1e1 +#define KEY_FN_F 0x1e2 +#define KEY_FN_S 0x1e3 +#define KEY_FN_B 0x1e4 + +#define KEY_BRL_DOT1 0x1f1 +#define KEY_BRL_DOT2 0x1f2 +#define KEY_BRL_DOT3 0x1f3 +#define KEY_BRL_DOT4 0x1f4 +#define KEY_BRL_DOT5 0x1f5 +#define KEY_BRL_DOT6 0x1f6 +#define KEY_BRL_DOT7 0x1f7 +#define KEY_BRL_DOT8 0x1f8 +#define KEY_BRL_DOT9 0x1f9 +#define KEY_BRL_DOT10 0x1fa + +#define KEY_NUMERIC_0 0x200 /* used by phones, remote controls, */ +#define KEY_NUMERIC_1 0x201 /* and other keypads */ +#define KEY_NUMERIC_2 0x202 +#define KEY_NUMERIC_3 0x203 +#define KEY_NUMERIC_4 0x204 +#define KEY_NUMERIC_5 0x205 +#define KEY_NUMERIC_6 0x206 +#define KEY_NUMERIC_7 0x207 +#define KEY_NUMERIC_8 0x208 +#define KEY_NUMERIC_9 0x209 +#define KEY_NUMERIC_STAR 0x20a +#define KEY_NUMERIC_POUND 0x20b + +#define KEY_CAMERA_FOCUS 0x210 +#define KEY_WPS_BUTTON 0x211 /* WiFi Protected Setup key */ + +#define KEY_TOUCHPAD_TOGGLE 0x212 /* Request switch touchpad on or off */ +#define KEY_TOUCHPAD_ON 0x213 +#define KEY_TOUCHPAD_OFF 0x214 + +#define KEY_CAMERA_ZOOMIN 0x215 +#define KEY_CAMERA_ZOOMOUT 0x216 +#define KEY_CAMERA_UP 0x217 +#define KEY_CAMERA_DOWN 0x218 +#define KEY_CAMERA_LEFT 0x219 +#define KEY_CAMERA_RIGHT 0x21a + +#define BTN_TRIGGER_HAPPY 0x2c0 +#define BTN_TRIGGER_HAPPY1 0x2c0 +#define BTN_TRIGGER_HAPPY2 0x2c1 +#define BTN_TRIGGER_HAPPY3 0x2c2 +#define BTN_TRIGGER_HAPPY4 0x2c3 +#define BTN_TRIGGER_HAPPY5 0x2c4 +#define BTN_TRIGGER_HAPPY6 0x2c5 +#define BTN_TRIGGER_HAPPY7 0x2c6 +#define BTN_TRIGGER_HAPPY8 0x2c7 +#define BTN_TRIGGER_HAPPY9 0x2c8 +#define BTN_TRIGGER_HAPPY10 0x2c9 +#define BTN_TRIGGER_HAPPY11 0x2ca +#define BTN_TRIGGER_HAPPY12 0x2cb +#define BTN_TRIGGER_HAPPY13 0x2cc +#define BTN_TRIGGER_HAPPY14 0x2cd +#define BTN_TRIGGER_HAPPY15 0x2ce +#define BTN_TRIGGER_HAPPY16 0x2cf +#define BTN_TRIGGER_HAPPY17 0x2d0 +#define BTN_TRIGGER_HAPPY18 0x2d1 +#define BTN_TRIGGER_HAPPY19 0x2d2 +#define BTN_TRIGGER_HAPPY20 0x2d3 +#define BTN_TRIGGER_HAPPY21 0x2d4 +#define BTN_TRIGGER_HAPPY22 0x2d5 +#define BTN_TRIGGER_HAPPY23 0x2d6 +#define BTN_TRIGGER_HAPPY24 0x2d7 +#define BTN_TRIGGER_HAPPY25 0x2d8 +#define BTN_TRIGGER_HAPPY26 0x2d9 +#define BTN_TRIGGER_HAPPY27 0x2da +#define BTN_TRIGGER_HAPPY28 0x2db +#define BTN_TRIGGER_HAPPY29 0x2dc +#define BTN_TRIGGER_HAPPY30 0x2dd +#define BTN_TRIGGER_HAPPY31 0x2de +#define BTN_TRIGGER_HAPPY32 0x2df +#define BTN_TRIGGER_HAPPY33 0x2e0 +#define BTN_TRIGGER_HAPPY34 0x2e1 +#define BTN_TRIGGER_HAPPY35 0x2e2 +#define BTN_TRIGGER_HAPPY36 0x2e3 +#define BTN_TRIGGER_HAPPY37 0x2e4 +#define BTN_TRIGGER_HAPPY38 0x2e5 +#define BTN_TRIGGER_HAPPY39 0x2e6 +#define BTN_TRIGGER_HAPPY40 0x2e7 + +/* We avoid low common keys in module aliases so they don't get huge. */ +#define KEY_MIN_INTERESTING KEY_MUTE +#define KEY_MAX 0x2ff +#define KEY_CNT (KEY_MAX+1) + +/* + * Relative axes + */ + +#define REL_X 0x00 +#define REL_Y 0x01 +#define REL_Z 0x02 +#define REL_RX 0x03 +#define REL_RY 0x04 +#define REL_RZ 0x05 +#define REL_HWHEEL 0x06 +#define REL_DIAL 0x07 +#define REL_WHEEL 0x08 +#define REL_MISC 0x09 +#define REL_MAX 0x0f +#define REL_CNT (REL_MAX+1) + +/* + * Absolute axes + */ + +#define ABS_X 0x00 +#define ABS_Y 0x01 +#define ABS_Z 0x02 +#define ABS_RX 0x03 +#define ABS_RY 0x04 +#define ABS_RZ 0x05 +#define ABS_THROTTLE 0x06 +#define ABS_RUDDER 0x07 +#define ABS_WHEEL 0x08 +#define ABS_GAS 0x09 +#define ABS_BRAKE 0x0a +#define ABS_HAT0X 0x10 +#define ABS_HAT0Y 0x11 +#define ABS_HAT1X 0x12 +#define ABS_HAT1Y 0x13 +#define ABS_HAT2X 0x14 +#define ABS_HAT2Y 0x15 +#define ABS_HAT3X 0x16 +#define ABS_HAT3Y 0x17 +#define ABS_PRESSURE 0x18 +#define ABS_DISTANCE 0x19 +#define ABS_TILT_X 0x1a +#define ABS_TILT_Y 0x1b +#define ABS_TOOL_WIDTH 0x1c + +#define ABS_VOLUME 0x20 + +#define ABS_MISC 0x28 + +#define ABS_MT_SLOT 0x2f /* MT slot being modified */ +#define ABS_MT_TOUCH_MAJOR 0x30 /* Major axis of touching ellipse */ +#define ABS_MT_TOUCH_MINOR 0x31 /* Minor axis (omit if circular) */ +#define ABS_MT_WIDTH_MAJOR 0x32 /* Major axis of approaching ellipse */ +#define ABS_MT_WIDTH_MINOR 0x33 /* Minor axis (omit if circular) */ +#define ABS_MT_ORIENTATION 0x34 /* Ellipse orientation */ +#define ABS_MT_POSITION_X 0x35 /* Center X touch position */ +#define ABS_MT_POSITION_Y 0x36 /* Center Y touch position */ +#define ABS_MT_TOOL_TYPE 0x37 /* Type of touching device */ +#define ABS_MT_BLOB_ID 0x38 /* Group a set of packets as a blob */ +#define ABS_MT_TRACKING_ID 0x39 /* Unique ID of initiated contact */ +#define ABS_MT_PRESSURE 0x3a /* Pressure on contact area */ +#define ABS_MT_DISTANCE 0x3b /* Contact hover distance */ +#define ABS_MT_TOOL_X 0x3c /* Center X tool position */ +#define ABS_MT_TOOL_Y 0x3d /* Center Y tool position */ + + +#define ABS_MAX 0x3f +#define ABS_CNT (ABS_MAX+1) + +/* + * Switch events + */ + +#define SW_LID 0x00 /* set = lid shut */ +#define SW_TABLET_MODE 0x01 /* set = tablet mode */ +#define SW_HEADPHONE_INSERT 0x02 /* set = inserted */ +#define SW_RFKILL_ALL 0x03 /* rfkill master switch, type "any" + set = radio enabled */ +#define SW_RADIO SW_RFKILL_ALL /* deprecated */ +#define SW_MICROPHONE_INSERT 0x04 /* set = inserted */ +#define SW_DOCK 0x05 /* set = plugged into dock */ +#define SW_LINEOUT_INSERT 0x06 /* set = inserted */ +#define SW_JACK_PHYSICAL_INSERT 0x07 /* set = mechanical switch set */ +#define SW_VIDEOOUT_INSERT 0x08 /* set = inserted */ +#define SW_CAMERA_LENS_COVER 0x09 /* set = lens covered */ +#define SW_KEYPAD_SLIDE 0x0a /* set = keypad slide out */ +#define SW_FRONT_PROXIMITY 0x0b /* set = front proximity sensor active */ +#define SW_ROTATE_LOCK 0x0c /* set = rotate locked/disabled */ +#define SW_LINEIN_INSERT 0x0d /* set = inserted */ +#define SW_MAX 0x0f +#define SW_CNT (SW_MAX+1) + +/* + * Misc events + */ + +#define MSC_SERIAL 0x00 +#define MSC_PULSELED 0x01 +#define MSC_GESTURE 0x02 +#define MSC_RAW 0x03 +#define MSC_SCAN 0x04 +#define MSC_MAX 0x07 +#define MSC_CNT (MSC_MAX+1) + +/* + * LEDs + */ + +#define LED_NUML 0x00 +#define LED_CAPSL 0x01 +#define LED_SCROLLL 0x02 +#define LED_COMPOSE 0x03 +#define LED_KANA 0x04 +#define LED_SLEEP 0x05 +#define LED_SUSPEND 0x06 +#define LED_MUTE 0x07 +#define LED_MISC 0x08 +#define LED_MAIL 0x09 +#define LED_CHARGING 0x0a +#define LED_MAX 0x0f +#define LED_CNT (LED_MAX+1) + +/* + * Autorepeat values + */ + +#define REP_DELAY 0x00 +#define REP_PERIOD 0x01 +#define REP_MAX 0x01 +#define REP_CNT (REP_MAX+1) + +/* + * Sounds + */ + +#define SND_CLICK 0x00 +#define SND_BELL 0x01 +#define SND_TONE 0x02 +#define SND_MAX 0x07 +#define SND_CNT (SND_MAX+1) + +/* + * IDs. + */ + +#define ID_BUS 0 +#define ID_VENDOR 1 +#define ID_PRODUCT 2 +#define ID_VERSION 3 + +#define BUS_PCI 0x01 +#define BUS_ISAPNP 0x02 +#define BUS_USB 0x03 +#define BUS_HIL 0x04 +#define BUS_BLUETOOTH 0x05 +#define BUS_VIRTUAL 0x06 + +#define BUS_ISA 0x10 +#define BUS_I8042 0x11 +#define BUS_XTKBD 0x12 +#define BUS_RS232 0x13 +#define BUS_GAMEPORT 0x14 +#define BUS_PARPORT 0x15 +#define BUS_AMIGA 0x16 +#define BUS_ADB 0x17 +#define BUS_I2C 0x18 +#define BUS_HOST 0x19 +#define BUS_GSC 0x1A +#define BUS_ATARI 0x1B +#define BUS_SPI 0x1C + +/* + * MT_TOOL types + */ +#define MT_TOOL_FINGER 0 +#define MT_TOOL_PEN 1 +#define MT_TOOL_MAX 1 + +/* + * Values describing the status of a force-feedback effect + */ +#define FF_STATUS_STOPPED 0x00 +#define FF_STATUS_PLAYING 0x01 +#define FF_STATUS_MAX 0x01 + +/* + * Structures used in ioctls to upload effects to a device + * They are pieces of a bigger structure (called ff_effect) + */ + +/* + * All duration values are expressed in ms. Values above 32767 ms (0x7fff) + * should not be used and have unspecified results. + */ + +/** + * struct ff_replay - defines scheduling of the force-feedback effect + * @length: duration of the effect + * @delay: delay before effect should start playing + */ +struct ff_replay { + __u16 length; + __u16 delay; +}; + +/** + * struct ff_trigger - defines what triggers the force-feedback effect + * @button: number of the button triggering the effect + * @interval: controls how soon the effect can be re-triggered + */ +struct ff_trigger { + __u16 button; + __u16 interval; +}; + +/** + * struct ff_envelope - generic force-feedback effect envelope + * @attack_length: duration of the attack (ms) + * @attack_level: level at the beginning of the attack + * @fade_length: duration of fade (ms) + * @fade_level: level at the end of fade + * + * The @attack_level and @fade_level are absolute values; when applying + * envelope force-feedback core will convert to positive/negative + * value based on polarity of the default level of the effect. + * Valid range for the attack and fade levels is 0x0000 - 0x7fff + */ +struct ff_envelope { + __u16 attack_length; + __u16 attack_level; + __u16 fade_length; + __u16 fade_level; +}; + +/** + * struct ff_constant_effect - defines parameters of a constant force-feedback effect + * @level: strength of the effect; may be negative + * @envelope: envelope data + */ +struct ff_constant_effect { + __s16 level; + struct ff_envelope envelope; +}; + +/** + * struct ff_ramp_effect - defines parameters of a ramp force-feedback effect + * @start_level: beginning strength of the effect; may be negative + * @end_level: final strength of the effect; may be negative + * @envelope: envelope data + */ +struct ff_ramp_effect { + __s16 start_level; + __s16 end_level; + struct ff_envelope envelope; +}; + +/** + * struct ff_condition_effect - defines a spring or friction force-feedback effect + * @right_saturation: maximum level when joystick moved all way to the right + * @left_saturation: same for the left side + * @right_coeff: controls how fast the force grows when the joystick moves + * to the right + * @left_coeff: same for the left side + * @deadband: size of the dead zone, where no force is produced + * @center: position of the dead zone + */ +struct ff_condition_effect { + __u16 right_saturation; + __u16 left_saturation; + + __s16 right_coeff; + __s16 left_coeff; + + __u16 deadband; + __s16 center; +}; + +/** + * struct ff_periodic_effect - defines parameters of a periodic force-feedback effect + * @waveform: kind of the effect (wave) + * @period: period of the wave (ms) + * @magnitude: peak value + * @offset: mean value of the wave (roughly) + * @phase: 'horizontal' shift + * @envelope: envelope data + * @custom_len: number of samples (FF_CUSTOM only) + * @custom_data: buffer of samples (FF_CUSTOM only) + * + * Known waveforms - FF_SQUARE, FF_TRIANGLE, FF_SINE, FF_SAW_UP, + * FF_SAW_DOWN, FF_CUSTOM. The exact syntax FF_CUSTOM is undefined + * for the time being as no driver supports it yet. + * + * Note: the data pointed by custom_data is copied by the driver. + * You can therefore dispose of the memory after the upload/update. + */ +struct ff_periodic_effect { + __u16 waveform; + __u16 period; + __s16 magnitude; + __s16 offset; + __u16 phase; + + struct ff_envelope envelope; + + __u32 custom_len; + __s16 __user *custom_data; +}; + +/** + * struct ff_rumble_effect - defines parameters of a periodic force-feedback effect + * @strong_magnitude: magnitude of the heavy motor + * @weak_magnitude: magnitude of the light one + * + * Some rumble pads have two motors of different weight. Strong_magnitude + * represents the magnitude of the vibration generated by the heavy one. + */ +struct ff_rumble_effect { + __u16 strong_magnitude; + __u16 weak_magnitude; +}; + +/** + * struct ff_effect - defines force feedback effect + * @type: type of the effect (FF_CONSTANT, FF_PERIODIC, FF_RAMP, FF_SPRING, + * FF_FRICTION, FF_DAMPER, FF_RUMBLE, FF_INERTIA, or FF_CUSTOM) + * @id: an unique id assigned to an effect + * @direction: direction of the effect + * @trigger: trigger conditions (struct ff_trigger) + * @replay: scheduling of the effect (struct ff_replay) + * @u: effect-specific structure (one of ff_constant_effect, ff_ramp_effect, + * ff_periodic_effect, ff_condition_effect, ff_rumble_effect) further + * defining effect parameters + * + * This structure is sent through ioctl from the application to the driver. + * To create a new effect application should set its @id to -1; the kernel + * will return assigned @id which can later be used to update or delete + * this effect. + * + * Direction of the effect is encoded as follows: + * 0 deg -> 0x0000 (down) + * 90 deg -> 0x4000 (left) + * 180 deg -> 0x8000 (up) + * 270 deg -> 0xC000 (right) + */ +struct ff_effect { + __u16 type; + __s16 id; + __u16 direction; + struct ff_trigger trigger; + struct ff_replay replay; + + union { + struct ff_constant_effect constant; + struct ff_ramp_effect ramp; + struct ff_periodic_effect periodic; + struct ff_condition_effect condition[2]; /* One for each axis */ + struct ff_rumble_effect rumble; + } u; +}; + +/* + * Force feedback effect types + */ + +#define FF_RUMBLE 0x50 +#define FF_PERIODIC 0x51 +#define FF_CONSTANT 0x52 +#define FF_SPRING 0x53 +#define FF_FRICTION 0x54 +#define FF_DAMPER 0x55 +#define FF_INERTIA 0x56 +#define FF_RAMP 0x57 + +#define FF_EFFECT_MIN FF_RUMBLE +#define FF_EFFECT_MAX FF_RAMP + +/* + * Force feedback periodic effect types + */ + +#define FF_SQUARE 0x58 +#define FF_TRIANGLE 0x59 +#define FF_SINE 0x5a +#define FF_SAW_UP 0x5b +#define FF_SAW_DOWN 0x5c +#define FF_CUSTOM 0x5d + +#define FF_WAVEFORM_MIN FF_SQUARE +#define FF_WAVEFORM_MAX FF_CUSTOM + +/* + * Set ff device properties + */ + +#define FF_GAIN 0x60 +#define FF_AUTOCENTER 0x61 + +#define FF_MAX 0x7f +#define FF_CNT (FF_MAX+1) + +#endif /* _UAPI_INPUT_H */ diff --git a/include/linux/ioctl.h b/include/uapi/linux/ioctl.h index aa91eb3951e..aa91eb3951e 100644 --- a/include/linux/ioctl.h +++ b/include/uapi/linux/ioctl.h diff --git a/include/uapi/linux/ip.h b/include/uapi/linux/ip.h new file mode 100644 index 00000000000..6cf06bfd841 --- /dev/null +++ b/include/uapi/linux/ip.h @@ -0,0 +1,136 @@ +/* + * INET An implementation of the TCP/IP protocol suite for the LINUX + * operating system. INET is implemented using the BSD Socket + * interface as the means of communication with the user level. + * + * Definitions for the IP protocol. + * + * Version: @(#)ip.h 1.0.2 04/28/93 + * + * Authors: Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _UAPI_LINUX_IP_H +#define _UAPI_LINUX_IP_H +#include <linux/types.h> +#include <asm/byteorder.h> + +#define IPTOS_TOS_MASK 0x1E +#define IPTOS_TOS(tos) ((tos)&IPTOS_TOS_MASK) +#define IPTOS_LOWDELAY 0x10 +#define IPTOS_THROUGHPUT 0x08 +#define IPTOS_RELIABILITY 0x04 +#define IPTOS_MINCOST 0x02 + +#define IPTOS_PREC_MASK 0xE0 +#define IPTOS_PREC(tos) ((tos)&IPTOS_PREC_MASK) +#define IPTOS_PREC_NETCONTROL 0xe0 +#define IPTOS_PREC_INTERNETCONTROL 0xc0 +#define IPTOS_PREC_CRITIC_ECP 0xa0 +#define IPTOS_PREC_FLASHOVERRIDE 0x80 +#define IPTOS_PREC_FLASH 0x60 +#define IPTOS_PREC_IMMEDIATE 0x40 +#define IPTOS_PREC_PRIORITY 0x20 +#define IPTOS_PREC_ROUTINE 0x00 + + +/* IP options */ +#define IPOPT_COPY 0x80 +#define IPOPT_CLASS_MASK 0x60 +#define IPOPT_NUMBER_MASK 0x1f + +#define IPOPT_COPIED(o) ((o)&IPOPT_COPY) +#define IPOPT_CLASS(o) ((o)&IPOPT_CLASS_MASK) +#define IPOPT_NUMBER(o) ((o)&IPOPT_NUMBER_MASK) + +#define IPOPT_CONTROL 0x00 +#define IPOPT_RESERVED1 0x20 +#define IPOPT_MEASUREMENT 0x40 +#define IPOPT_RESERVED2 0x60 + +#define IPOPT_END (0 |IPOPT_CONTROL) +#define IPOPT_NOOP (1 |IPOPT_CONTROL) +#define IPOPT_SEC (2 |IPOPT_CONTROL|IPOPT_COPY) +#define IPOPT_LSRR (3 |IPOPT_CONTROL|IPOPT_COPY) +#define IPOPT_TIMESTAMP (4 |IPOPT_MEASUREMENT) +#define IPOPT_CIPSO (6 |IPOPT_CONTROL|IPOPT_COPY) +#define IPOPT_RR (7 |IPOPT_CONTROL) +#define IPOPT_SID (8 |IPOPT_CONTROL|IPOPT_COPY) +#define IPOPT_SSRR (9 |IPOPT_CONTROL|IPOPT_COPY) +#define IPOPT_RA (20|IPOPT_CONTROL|IPOPT_COPY) + +#define IPVERSION 4 +#define MAXTTL 255 +#define IPDEFTTL 64 + +#define IPOPT_OPTVAL 0 +#define IPOPT_OLEN 1 +#define IPOPT_OFFSET 2 +#define IPOPT_MINOFF 4 +#define MAX_IPOPTLEN 40 +#define IPOPT_NOP IPOPT_NOOP +#define IPOPT_EOL IPOPT_END +#define IPOPT_TS IPOPT_TIMESTAMP + +#define IPOPT_TS_TSONLY 0 /* timestamps only */ +#define IPOPT_TS_TSANDADDR 1 /* timestamps and addresses */ +#define IPOPT_TS_PRESPEC 3 /* specified modules only */ + +#define IPV4_BEET_PHMAXLEN 8 + +struct iphdr { +#if defined(__LITTLE_ENDIAN_BITFIELD) + __u8 ihl:4, + version:4; +#elif defined (__BIG_ENDIAN_BITFIELD) + __u8 version:4, + ihl:4; +#else +#error "Please fix <asm/byteorder.h>" +#endif + __u8 tos; + __be16 tot_len; + __be16 id; + __be16 frag_off; + __u8 ttl; + __u8 protocol; + __sum16 check; + __be32 saddr; + __be32 daddr; + /*The options start here. */ +}; + + +struct ip_auth_hdr { + __u8 nexthdr; + __u8 hdrlen; /* This one is measured in 32 bit units! */ + __be16 reserved; + __be32 spi; + __be32 seq_no; /* Sequence number */ + __u8 auth_data[0]; /* Variable len but >=4. Mind the 64 bit alignment! */ +}; + +struct ip_esp_hdr { + __be32 spi; + __be32 seq_no; /* Sequence number */ + __u8 enc_data[0]; /* Variable len but >=8. Mind the 64 bit alignment! */ +}; + +struct ip_comp_hdr { + __u8 nexthdr; + __u8 flags; + __be16 cpi; +}; + +struct ip_beet_phdr { + __u8 nexthdr; + __u8 hdrlen; + __u8 padlen; + __u8 reserved; +}; + +#endif /* _UAPI_LINUX_IP_H */ diff --git a/include/linux/ip6_tunnel.h b/include/uapi/linux/ip6_tunnel.h index 48af63c9a48..48af63c9a48 100644 --- a/include/linux/ip6_tunnel.h +++ b/include/uapi/linux/ip6_tunnel.h diff --git a/include/linux/ip_vs.h b/include/uapi/linux/ip_vs.h index 8a2d438dc49..8a2d438dc49 100644 --- a/include/linux/ip_vs.h +++ b/include/uapi/linux/ip_vs.h diff --git a/include/uapi/linux/ipc.h b/include/uapi/linux/ipc.h new file mode 100644 index 00000000000..de08dd46dda --- /dev/null +++ b/include/uapi/linux/ipc.h @@ -0,0 +1,81 @@ +#ifndef _UAPI_LINUX_IPC_H +#define _UAPI_LINUX_IPC_H + +#include <linux/types.h> + +#define IPC_PRIVATE ((__kernel_key_t) 0) + +/* Obsolete, used only for backwards compatibility and libc5 compiles */ +struct ipc_perm +{ + __kernel_key_t key; + __kernel_uid_t uid; + __kernel_gid_t gid; + __kernel_uid_t cuid; + __kernel_gid_t cgid; + __kernel_mode_t mode; + unsigned short seq; +}; + +/* Include the definition of ipc64_perm */ +#include <asm/ipcbuf.h> + +/* resource get request flags */ +#define IPC_CREAT 00001000 /* create if key is nonexistent */ +#define IPC_EXCL 00002000 /* fail if key exists */ +#define IPC_NOWAIT 00004000 /* return error on wait */ + +/* these fields are used by the DIPC package so the kernel as standard + should avoid using them if possible */ + +#define IPC_DIPC 00010000 /* make it distributed */ +#define IPC_OWN 00020000 /* this machine is the DIPC owner */ + +/* + * Control commands used with semctl, msgctl and shmctl + * see also specific commands in sem.h, msg.h and shm.h + */ +#define IPC_RMID 0 /* remove resource */ +#define IPC_SET 1 /* set ipc_perm options */ +#define IPC_STAT 2 /* get ipc_perm options */ +#define IPC_INFO 3 /* see ipcs */ + +/* + * Version flags for semctl, msgctl, and shmctl commands + * These are passed as bitflags or-ed with the actual command + */ +#define IPC_OLD 0 /* Old version (no 32-bit UID support on many + architectures) */ +#define IPC_64 0x0100 /* New version (support 32-bit UIDs, bigger + message sizes, etc. */ + +/* + * These are used to wrap system calls. + * + * See architecture code for ugly details.. + */ +struct ipc_kludge { + struct msgbuf __user *msgp; + long msgtyp; +}; + +#define SEMOP 1 +#define SEMGET 2 +#define SEMCTL 3 +#define SEMTIMEDOP 4 +#define MSGSND 11 +#define MSGRCV 12 +#define MSGGET 13 +#define MSGCTL 14 +#define SHMAT 21 +#define SHMDT 22 +#define SHMGET 23 +#define SHMCTL 24 + +/* Used by the DIPC package, try and avoid reusing it */ +#define DIPC 25 + +#define IPCCALL(version,op) ((version)<<16 | (op)) + + +#endif /* _UAPI_LINUX_IPC_H */ diff --git a/include/uapi/linux/ipmi.h b/include/uapi/linux/ipmi.h new file mode 100644 index 00000000000..33fbc99b381 --- /dev/null +++ b/include/uapi/linux/ipmi.h @@ -0,0 +1,456 @@ +/* + * ipmi.h + * + * MontaVista IPMI interface + * + * Author: MontaVista Software, Inc. + * Corey Minyard <minyard@mvista.com> + * source@mvista.com + * + * Copyright 2002 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _UAPI__LINUX_IPMI_H +#define _UAPI__LINUX_IPMI_H + +#include <linux/ipmi_msgdefs.h> +#include <linux/compiler.h> + +/* + * This file describes an interface to an IPMI driver. You have to + * have a fairly good understanding of IPMI to use this, so go read + * the specs first before actually trying to do anything. + * + * With that said, this driver provides a multi-user interface to the + * IPMI driver, and it allows multiple IPMI physical interfaces below + * the driver. The physical interfaces bind as a lower layer on the + * driver. They appear as interfaces to the application using this + * interface. + * + * Multi-user means that multiple applications may use the driver, + * send commands, receive responses, etc. The driver keeps track of + * commands the user sends and tracks the responses. The responses + * will go back to the application that send the command. If the + * response doesn't come back in time, the driver will return a + * timeout error response to the application. Asynchronous events + * from the BMC event queue will go to all users bound to the driver. + * The incoming event queue in the BMC will automatically be flushed + * if it becomes full and it is queried once a second to see if + * anything is in it. Incoming commands to the driver will get + * delivered as commands. + * + * This driver provides two main interfaces: one for in-kernel + * applications and another for userland applications. The + * capabilities are basically the same for both interface, although + * the interfaces are somewhat different. The stuff in the + * #ifdef __KERNEL__ below is the in-kernel interface. The userland + * interface is defined later in the file. */ + + + +/* + * This is an overlay for all the address types, so it's easy to + * determine the actual address type. This is kind of like addresses + * work for sockets. + */ +#define IPMI_MAX_ADDR_SIZE 32 +struct ipmi_addr { + /* Try to take these from the "Channel Medium Type" table + in section 6.5 of the IPMI 1.5 manual. */ + int addr_type; + short channel; + char data[IPMI_MAX_ADDR_SIZE]; +}; + +/* + * When the address is not used, the type will be set to this value. + * The channel is the BMC's channel number for the channel (usually + * 0), or IPMC_BMC_CHANNEL if communicating directly with the BMC. + */ +#define IPMI_SYSTEM_INTERFACE_ADDR_TYPE 0x0c +struct ipmi_system_interface_addr { + int addr_type; + short channel; + unsigned char lun; +}; + +/* An IPMB Address. */ +#define IPMI_IPMB_ADDR_TYPE 0x01 +/* Used for broadcast get device id as described in section 17.9 of the + IPMI 1.5 manual. */ +#define IPMI_IPMB_BROADCAST_ADDR_TYPE 0x41 +struct ipmi_ipmb_addr { + int addr_type; + short channel; + unsigned char slave_addr; + unsigned char lun; +}; + +/* + * A LAN Address. This is an address to/from a LAN interface bridged + * by the BMC, not an address actually out on the LAN. + * + * A conscious decision was made here to deviate slightly from the IPMI + * spec. We do not use rqSWID and rsSWID like it shows in the + * message. Instead, we use remote_SWID and local_SWID. This means + * that any message (a request or response) from another device will + * always have exactly the same address. If you didn't do this, + * requests and responses from the same device would have different + * addresses, and that's not too cool. + * + * In this address, the remote_SWID is always the SWID the remote + * message came from, or the SWID we are sending the message to. + * local_SWID is always our SWID. Note that having our SWID in the + * message is a little weird, but this is required. + */ +#define IPMI_LAN_ADDR_TYPE 0x04 +struct ipmi_lan_addr { + int addr_type; + short channel; + unsigned char privilege; + unsigned char session_handle; + unsigned char remote_SWID; + unsigned char local_SWID; + unsigned char lun; +}; + + +/* + * Channel for talking directly with the BMC. When using this + * channel, This is for the system interface address type only. FIXME + * - is this right, or should we use -1? + */ +#define IPMI_BMC_CHANNEL 0xf +#define IPMI_NUM_CHANNELS 0x10 + +/* + * Used to signify an "all channel" bitmask. This is more than the + * actual number of channels because this is used in userland and + * will cover us if the number of channels is extended. + */ +#define IPMI_CHAN_ALL (~0) + + +/* + * A raw IPMI message without any addressing. This covers both + * commands and responses. The completion code is always the first + * byte of data in the response (as the spec shows the messages laid + * out). + */ +struct ipmi_msg { + unsigned char netfn; + unsigned char cmd; + unsigned short data_len; + unsigned char __user *data; +}; + +struct kernel_ipmi_msg { + unsigned char netfn; + unsigned char cmd; + unsigned short data_len; + unsigned char *data; +}; + +/* + * Various defines that are useful for IPMI applications. + */ +#define IPMI_INVALID_CMD_COMPLETION_CODE 0xC1 +#define IPMI_TIMEOUT_COMPLETION_CODE 0xC3 +#define IPMI_UNKNOWN_ERR_COMPLETION_CODE 0xff + + +/* + * Receive types for messages coming from the receive interface. This + * is used for the receive in-kernel interface and in the receive + * IOCTL. + * + * The "IPMI_RESPONSE_RESPNOSE_TYPE" is a little strange sounding, but + * it allows you to get the message results when you send a response + * message. + */ +#define IPMI_RESPONSE_RECV_TYPE 1 /* A response to a command */ +#define IPMI_ASYNC_EVENT_RECV_TYPE 2 /* Something from the event queue */ +#define IPMI_CMD_RECV_TYPE 3 /* A command from somewhere else */ +#define IPMI_RESPONSE_RESPONSE_TYPE 4 /* The response for + a sent response, giving any + error status for sending the + response. When you send a + response message, this will + be returned. */ +#define IPMI_OEM_RECV_TYPE 5 /* The response for OEM Channels */ + +/* Note that async events and received commands do not have a completion + code as the first byte of the incoming data, unlike a response. */ + + +/* + * Modes for ipmi_set_maint_mode() and the userland IOCTL. The AUTO + * setting is the default and means it will be set on certain + * commands. Hard setting it on and off will override automatic + * operation. + */ +#define IPMI_MAINTENANCE_MODE_AUTO 0 +#define IPMI_MAINTENANCE_MODE_OFF 1 +#define IPMI_MAINTENANCE_MODE_ON 2 + + + +/* + * The userland interface + */ + +/* + * The userland interface for the IPMI driver is a standard character + * device, with each instance of an interface registered as a minor + * number under the major character device. + * + * The read and write calls do not work, to get messages in and out + * requires ioctl calls because of the complexity of the data. select + * and poll do work, so you can wait for input using the file + * descriptor, you just can use read to get it. + * + * In general, you send a command down to the interface and receive + * responses back. You can use the msgid value to correlate commands + * and responses, the driver will take care of figuring out which + * incoming messages are for which command and find the proper msgid + * value to report. You will only receive reponses for commands you + * send. Asynchronous events, however, go to all open users, so you + * must be ready to handle these (or ignore them if you don't care). + * + * The address type depends upon the channel type. When talking + * directly to the BMC (IPMC_BMC_CHANNEL), the address is ignored + * (IPMI_UNUSED_ADDR_TYPE). When talking to an IPMB channel, you must + * supply a valid IPMB address with the addr_type set properly. + * + * When talking to normal channels, the driver takes care of the + * details of formatting and sending messages on that channel. You do + * not, for instance, have to format a send command, you just send + * whatever command you want to the channel, the driver will create + * the send command, automatically issue receive command and get even + * commands, and pass those up to the proper user. + */ + + +/* The magic IOCTL value for this interface. */ +#define IPMI_IOC_MAGIC 'i' + + +/* Messages sent to the interface are this format. */ +struct ipmi_req { + unsigned char __user *addr; /* Address to send the message to. */ + unsigned int addr_len; + + long msgid; /* The sequence number for the message. This + exact value will be reported back in the + response to this request if it is a command. + If it is a response, this will be used as + the sequence value for the response. */ + + struct ipmi_msg msg; +}; +/* + * Send a message to the interfaces. error values are: + * - EFAULT - an address supplied was invalid. + * - EINVAL - The address supplied was not valid, or the command + * was not allowed. + * - EMSGSIZE - The message to was too large. + * - ENOMEM - Buffers could not be allocated for the command. + */ +#define IPMICTL_SEND_COMMAND _IOR(IPMI_IOC_MAGIC, 13, \ + struct ipmi_req) + +/* Messages sent to the interface with timing parameters are this + format. */ +struct ipmi_req_settime { + struct ipmi_req req; + + /* See ipmi_request_settime() above for details on these + values. */ + int retries; + unsigned int retry_time_ms; +}; +/* + * Send a message to the interfaces with timing parameters. error values + * are: + * - EFAULT - an address supplied was invalid. + * - EINVAL - The address supplied was not valid, or the command + * was not allowed. + * - EMSGSIZE - The message to was too large. + * - ENOMEM - Buffers could not be allocated for the command. + */ +#define IPMICTL_SEND_COMMAND_SETTIME _IOR(IPMI_IOC_MAGIC, 21, \ + struct ipmi_req_settime) + +/* Messages received from the interface are this format. */ +struct ipmi_recv { + int recv_type; /* Is this a command, response or an + asyncronous event. */ + + unsigned char __user *addr; /* Address the message was from is put + here. The caller must supply the + memory. */ + unsigned int addr_len; /* The size of the address buffer. + The caller supplies the full buffer + length, this value is updated to + the actual message length when the + message is received. */ + + long msgid; /* The sequence number specified in the request + if this is a response. If this is a command, + this will be the sequence number from the + command. */ + + struct ipmi_msg msg; /* The data field must point to a buffer. + The data_size field must be set to the + size of the message buffer. The + caller supplies the full buffer + length, this value is updated to the + actual message length when the message + is received. */ +}; + +/* + * Receive a message. error values: + * - EAGAIN - no messages in the queue. + * - EFAULT - an address supplied was invalid. + * - EINVAL - The address supplied was not valid. + * - EMSGSIZE - The message to was too large to fit into the message buffer, + * the message will be left in the buffer. */ +#define IPMICTL_RECEIVE_MSG _IOWR(IPMI_IOC_MAGIC, 12, \ + struct ipmi_recv) + +/* + * Like RECEIVE_MSG, but if the message won't fit in the buffer, it + * will truncate the contents instead of leaving the data in the + * buffer. + */ +#define IPMICTL_RECEIVE_MSG_TRUNC _IOWR(IPMI_IOC_MAGIC, 11, \ + struct ipmi_recv) + +/* Register to get commands from other entities on this interface. */ +struct ipmi_cmdspec { + unsigned char netfn; + unsigned char cmd; +}; + +/* + * Register to receive a specific command. error values: + * - EFAULT - an address supplied was invalid. + * - EBUSY - The netfn/cmd supplied was already in use. + * - ENOMEM - could not allocate memory for the entry. + */ +#define IPMICTL_REGISTER_FOR_CMD _IOR(IPMI_IOC_MAGIC, 14, \ + struct ipmi_cmdspec) +/* + * Unregister a regsitered command. error values: + * - EFAULT - an address supplied was invalid. + * - ENOENT - The netfn/cmd was not found registered for this user. + */ +#define IPMICTL_UNREGISTER_FOR_CMD _IOR(IPMI_IOC_MAGIC, 15, \ + struct ipmi_cmdspec) + +/* + * Register to get commands from other entities on specific channels. + * This way, you can only listen on specific channels, or have messages + * from some channels go to one place and other channels to someplace + * else. The chans field is a bitmask, (1 << channel) for each channel. + * It may be IPMI_CHAN_ALL for all channels. + */ +struct ipmi_cmdspec_chans { + unsigned int netfn; + unsigned int cmd; + unsigned int chans; +}; + +/* + * Register to receive a specific command on specific channels. error values: + * - EFAULT - an address supplied was invalid. + * - EBUSY - One of the netfn/cmd/chans supplied was already in use. + * - ENOMEM - could not allocate memory for the entry. + */ +#define IPMICTL_REGISTER_FOR_CMD_CHANS _IOR(IPMI_IOC_MAGIC, 28, \ + struct ipmi_cmdspec_chans) +/* + * Unregister some netfn/cmd/chans. error values: + * - EFAULT - an address supplied was invalid. + * - ENOENT - None of the netfn/cmd/chans were found registered for this user. + */ +#define IPMICTL_UNREGISTER_FOR_CMD_CHANS _IOR(IPMI_IOC_MAGIC, 29, \ + struct ipmi_cmdspec_chans) + +/* + * Set whether this interface receives events. Note that the first + * user registered for events will get all pending events for the + * interface. error values: + * - EFAULT - an address supplied was invalid. + */ +#define IPMICTL_SET_GETS_EVENTS_CMD _IOR(IPMI_IOC_MAGIC, 16, int) + +/* + * Set and get the slave address and LUN that we will use for our + * source messages. Note that this affects the interface, not just + * this user, so it will affect all users of this interface. This is + * so some initialization code can come in and do the OEM-specific + * things it takes to determine your address (if not the BMC) and set + * it for everyone else. You should probably leave the LUN alone. + */ +struct ipmi_channel_lun_address_set { + unsigned short channel; + unsigned char value; +}; +#define IPMICTL_SET_MY_CHANNEL_ADDRESS_CMD \ + _IOR(IPMI_IOC_MAGIC, 24, struct ipmi_channel_lun_address_set) +#define IPMICTL_GET_MY_CHANNEL_ADDRESS_CMD \ + _IOR(IPMI_IOC_MAGIC, 25, struct ipmi_channel_lun_address_set) +#define IPMICTL_SET_MY_CHANNEL_LUN_CMD \ + _IOR(IPMI_IOC_MAGIC, 26, struct ipmi_channel_lun_address_set) +#define IPMICTL_GET_MY_CHANNEL_LUN_CMD \ + _IOR(IPMI_IOC_MAGIC, 27, struct ipmi_channel_lun_address_set) +/* Legacy interfaces, these only set IPMB 0. */ +#define IPMICTL_SET_MY_ADDRESS_CMD _IOR(IPMI_IOC_MAGIC, 17, unsigned int) +#define IPMICTL_GET_MY_ADDRESS_CMD _IOR(IPMI_IOC_MAGIC, 18, unsigned int) +#define IPMICTL_SET_MY_LUN_CMD _IOR(IPMI_IOC_MAGIC, 19, unsigned int) +#define IPMICTL_GET_MY_LUN_CMD _IOR(IPMI_IOC_MAGIC, 20, unsigned int) + +/* + * Get/set the default timing values for an interface. You shouldn't + * generally mess with these. + */ +struct ipmi_timing_parms { + int retries; + unsigned int retry_time_ms; +}; +#define IPMICTL_SET_TIMING_PARMS_CMD _IOR(IPMI_IOC_MAGIC, 22, \ + struct ipmi_timing_parms) +#define IPMICTL_GET_TIMING_PARMS_CMD _IOR(IPMI_IOC_MAGIC, 23, \ + struct ipmi_timing_parms) + +/* + * Set the maintenance mode. See ipmi_set_maintenance_mode() above + * for a description of what this does. + */ +#define IPMICTL_GET_MAINTENANCE_MODE_CMD _IOR(IPMI_IOC_MAGIC, 30, int) +#define IPMICTL_SET_MAINTENANCE_MODE_CMD _IOW(IPMI_IOC_MAGIC, 31, int) + +#endif /* _UAPI__LINUX_IPMI_H */ diff --git a/include/linux/ipmi_msgdefs.h b/include/uapi/linux/ipmi_msgdefs.h index df97e6e31e8..df97e6e31e8 100644 --- a/include/linux/ipmi_msgdefs.h +++ b/include/uapi/linux/ipmi_msgdefs.h diff --git a/include/linux/ipsec.h b/include/uapi/linux/ipsec.h index d17a6302a0e..d17a6302a0e 100644 --- a/include/linux/ipsec.h +++ b/include/uapi/linux/ipsec.h diff --git a/include/uapi/linux/ipv6.h b/include/uapi/linux/ipv6.h new file mode 100644 index 00000000000..a6d7d1c536c --- /dev/null +++ b/include/uapi/linux/ipv6.h @@ -0,0 +1,164 @@ +#ifndef _UAPI_IPV6_H +#define _UAPI_IPV6_H + +#include <linux/types.h> +#include <linux/in6.h> +#include <asm/byteorder.h> + +/* The latest drafts declared increase in minimal mtu up to 1280. */ + +#define IPV6_MIN_MTU 1280 + +/* + * Advanced API + * source interface/address selection, source routing, etc... + * *under construction* + */ + + +struct in6_pktinfo { + struct in6_addr ipi6_addr; + int ipi6_ifindex; +}; + +struct ip6_mtuinfo { + struct sockaddr_in6 ip6m_addr; + __u32 ip6m_mtu; +}; + +struct in6_ifreq { + struct in6_addr ifr6_addr; + __u32 ifr6_prefixlen; + int ifr6_ifindex; +}; + +#define IPV6_SRCRT_STRICT 0x01 /* Deprecated; will be removed */ +#define IPV6_SRCRT_TYPE_0 0 /* Deprecated; will be removed */ +#define IPV6_SRCRT_TYPE_2 2 /* IPv6 type 2 Routing Header */ + +/* + * routing header + */ +struct ipv6_rt_hdr { + __u8 nexthdr; + __u8 hdrlen; + __u8 type; + __u8 segments_left; + + /* + * type specific data + * variable length field + */ +}; + + +struct ipv6_opt_hdr { + __u8 nexthdr; + __u8 hdrlen; + /* + * TLV encoded option data follows. + */ +} __attribute__((packed)); /* required for some archs */ + +#define ipv6_destopt_hdr ipv6_opt_hdr +#define ipv6_hopopt_hdr ipv6_opt_hdr + + +/* + * routing header type 0 (used in cmsghdr struct) + */ + +struct rt0_hdr { + struct ipv6_rt_hdr rt_hdr; + __u32 reserved; + struct in6_addr addr[0]; + +#define rt0_type rt_hdr.type +}; + +/* + * routing header type 2 + */ + +struct rt2_hdr { + struct ipv6_rt_hdr rt_hdr; + __u32 reserved; + struct in6_addr addr; + +#define rt2_type rt_hdr.type +}; + +/* + * home address option in destination options header + */ + +struct ipv6_destopt_hao { + __u8 type; + __u8 length; + struct in6_addr addr; +} __attribute__((packed)); + +/* + * IPv6 fixed header + * + * BEWARE, it is incorrect. The first 4 bits of flow_lbl + * are glued to priority now, forming "class". + */ + +struct ipv6hdr { +#if defined(__LITTLE_ENDIAN_BITFIELD) + __u8 priority:4, + version:4; +#elif defined(__BIG_ENDIAN_BITFIELD) + __u8 version:4, + priority:4; +#else +#error "Please fix <asm/byteorder.h>" +#endif + __u8 flow_lbl[3]; + + __be16 payload_len; + __u8 nexthdr; + __u8 hop_limit; + + struct in6_addr saddr; + struct in6_addr daddr; +}; + + +/* index values for the variables in ipv6_devconf */ +enum { + DEVCONF_FORWARDING = 0, + DEVCONF_HOPLIMIT, + DEVCONF_MTU6, + DEVCONF_ACCEPT_RA, + DEVCONF_ACCEPT_REDIRECTS, + DEVCONF_AUTOCONF, + DEVCONF_DAD_TRANSMITS, + DEVCONF_RTR_SOLICITS, + DEVCONF_RTR_SOLICIT_INTERVAL, + DEVCONF_RTR_SOLICIT_DELAY, + DEVCONF_USE_TEMPADDR, + DEVCONF_TEMP_VALID_LFT, + DEVCONF_TEMP_PREFERED_LFT, + DEVCONF_REGEN_MAX_RETRY, + DEVCONF_MAX_DESYNC_FACTOR, + DEVCONF_MAX_ADDRESSES, + DEVCONF_FORCE_MLD_VERSION, + DEVCONF_ACCEPT_RA_DEFRTR, + DEVCONF_ACCEPT_RA_PINFO, + DEVCONF_ACCEPT_RA_RTR_PREF, + DEVCONF_RTR_PROBE_INTERVAL, + DEVCONF_ACCEPT_RA_RT_INFO_MAX_PLEN, + DEVCONF_PROXY_NDP, + DEVCONF_OPTIMISTIC_DAD, + DEVCONF_ACCEPT_SOURCE_ROUTE, + DEVCONF_MC_FORWARDING, + DEVCONF_DISABLE_IPV6, + DEVCONF_ACCEPT_DAD, + DEVCONF_FORCE_TLLAO, + DEVCONF_MAX +}; + + +#endif /* _UAPI_IPV6_H */ diff --git a/include/uapi/linux/ipv6_route.h b/include/uapi/linux/ipv6_route.h new file mode 100644 index 00000000000..0459664c263 --- /dev/null +++ b/include/uapi/linux/ipv6_route.h @@ -0,0 +1,58 @@ +/* + * Linux INET6 implementation + * + * Authors: + * Pedro Roque <roque@di.fc.ul.pt> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _UAPI_LINUX_IPV6_ROUTE_H +#define _UAPI_LINUX_IPV6_ROUTE_H + +#include <linux/types.h> + +#define RTF_DEFAULT 0x00010000 /* default - learned via ND */ +#define RTF_ALLONLINK 0x00020000 /* (deprecated and will be removed) + fallback, no routers on link */ +#define RTF_ADDRCONF 0x00040000 /* addrconf route - RA */ +#define RTF_PREFIX_RT 0x00080000 /* A prefix only route - RA */ +#define RTF_ANYCAST 0x00100000 /* Anycast */ + +#define RTF_NONEXTHOP 0x00200000 /* route with no nexthop */ +#define RTF_EXPIRES 0x00400000 + +#define RTF_ROUTEINFO 0x00800000 /* route information - RA */ + +#define RTF_CACHE 0x01000000 /* cache entry */ +#define RTF_FLOW 0x02000000 /* flow significant route */ +#define RTF_POLICY 0x04000000 /* policy route */ + +#define RTF_PREF(pref) ((pref) << 27) +#define RTF_PREF_MASK 0x18000000 + +#define RTF_LOCAL 0x80000000 + + +struct in6_rtmsg { + struct in6_addr rtmsg_dst; + struct in6_addr rtmsg_src; + struct in6_addr rtmsg_gateway; + __u32 rtmsg_type; + __u16 rtmsg_dst_len; + __u16 rtmsg_src_len; + __u32 rtmsg_metric; + unsigned long rtmsg_info; + __u32 rtmsg_flags; + int rtmsg_ifindex; +}; + +#define RTMSG_NEWDEVICE 0x11 +#define RTMSG_DELDEVICE 0x12 +#define RTMSG_NEWROUTE 0x21 +#define RTMSG_DELROUTE 0x22 + +#endif /* _UAPI_LINUX_IPV6_ROUTE_H */ diff --git a/include/linux/ipx.h b/include/uapi/linux/ipx.h index 3d48014cdd7..3d48014cdd7 100644 --- a/include/linux/ipx.h +++ b/include/uapi/linux/ipx.h diff --git a/include/linux/irda.h b/include/uapi/linux/irda.h index a014c325231..a014c325231 100644 --- a/include/linux/irda.h +++ b/include/uapi/linux/irda.h diff --git a/include/uapi/linux/irqnr.h b/include/uapi/linux/irqnr.h new file mode 100644 index 00000000000..e69de29bb2d --- /dev/null +++ b/include/uapi/linux/irqnr.h diff --git a/include/uapi/linux/isdn.h b/include/uapi/linux/isdn.h new file mode 100644 index 00000000000..eb1995fffc3 --- /dev/null +++ b/include/uapi/linux/isdn.h @@ -0,0 +1,143 @@ +/* $Id: isdn.h,v 1.125.2.3 2004/02/10 01:07:14 keil Exp $ + * + * Main header for the Linux ISDN subsystem (linklevel). + * + * Copyright 1994,95,96 by Fritz Elfert (fritz@isdn4linux.de) + * Copyright 1995,96 by Thinking Objects Software GmbH Wuerzburg + * Copyright 1995,96 by Michael Hipp (Michael.Hipp@student.uni-tuebingen.de) + * + * This software may be used and distributed according to the terms + * of the GNU General Public License, incorporated herein by reference. + * + */ + +#ifndef _UAPI__ISDN_H__ +#define _UAPI__ISDN_H__ + +#include <linux/ioctl.h> +#include <linux/tty.h> + +#define ISDN_MAX_DRIVERS 32 +#define ISDN_MAX_CHANNELS 64 + +/* New ioctl-codes */ +#define IIOCNETAIF _IO('I',1) +#define IIOCNETDIF _IO('I',2) +#define IIOCNETSCF _IO('I',3) +#define IIOCNETGCF _IO('I',4) +#define IIOCNETANM _IO('I',5) +#define IIOCNETDNM _IO('I',6) +#define IIOCNETGNM _IO('I',7) +#define IIOCGETSET _IO('I',8) /* no longer supported */ +#define IIOCSETSET _IO('I',9) /* no longer supported */ +#define IIOCSETVER _IO('I',10) +#define IIOCNETHUP _IO('I',11) +#define IIOCSETGST _IO('I',12) +#define IIOCSETBRJ _IO('I',13) +#define IIOCSIGPRF _IO('I',14) +#define IIOCGETPRF _IO('I',15) +#define IIOCSETPRF _IO('I',16) +#define IIOCGETMAP _IO('I',17) +#define IIOCSETMAP _IO('I',18) +#define IIOCNETASL _IO('I',19) +#define IIOCNETDIL _IO('I',20) +#define IIOCGETCPS _IO('I',21) +#define IIOCGETDVR _IO('I',22) +#define IIOCNETLCR _IO('I',23) /* dwabc ioctl for LCR from isdnlog */ +#define IIOCNETDWRSET _IO('I',24) /* dwabc ioctl to reset abc-values to default on a net-interface */ + +#define IIOCNETALN _IO('I',32) +#define IIOCNETDLN _IO('I',33) + +#define IIOCNETGPN _IO('I',34) + +#define IIOCDBGVAR _IO('I',127) + +#define IIOCDRVCTL _IO('I',128) + +/* cisco hdlck device private ioctls */ +#define SIOCGKEEPPERIOD (SIOCDEVPRIVATE + 0) +#define SIOCSKEEPPERIOD (SIOCDEVPRIVATE + 1) +#define SIOCGDEBSERINT (SIOCDEVPRIVATE + 2) +#define SIOCSDEBSERINT (SIOCDEVPRIVATE + 3) + +/* Packet encapsulations for net-interfaces */ +#define ISDN_NET_ENCAP_ETHER 0 +#define ISDN_NET_ENCAP_RAWIP 1 +#define ISDN_NET_ENCAP_IPTYP 2 +#define ISDN_NET_ENCAP_CISCOHDLC 3 /* Without SLARP and keepalive */ +#define ISDN_NET_ENCAP_SYNCPPP 4 +#define ISDN_NET_ENCAP_UIHDLC 5 +#define ISDN_NET_ENCAP_CISCOHDLCK 6 /* With SLARP and keepalive */ +#define ISDN_NET_ENCAP_X25IFACE 7 /* Documentation/networking/x25-iface.txt */ +#define ISDN_NET_ENCAP_MAX_ENCAP ISDN_NET_ENCAP_X25IFACE + +/* Facility which currently uses an ISDN-channel */ +#define ISDN_USAGE_NONE 0 +#define ISDN_USAGE_RAW 1 +#define ISDN_USAGE_MODEM 2 +#define ISDN_USAGE_NET 3 +#define ISDN_USAGE_VOICE 4 +#define ISDN_USAGE_FAX 5 +#define ISDN_USAGE_MASK 7 /* Mask to get plain usage */ +#define ISDN_USAGE_DISABLED 32 /* This bit is set, if channel is disabled */ +#define ISDN_USAGE_EXCLUSIVE 64 /* This bit is set, if channel is exclusive */ +#define ISDN_USAGE_OUTGOING 128 /* This bit is set, if channel is outgoing */ + +#define ISDN_MODEM_NUMREG 24 /* Number of Modem-Registers */ +#define ISDN_LMSNLEN 255 /* Length of tty's Listen-MSN string */ +#define ISDN_CMSGLEN 50 /* Length of CONNECT-Message to add for Modem */ + +#define ISDN_MSNLEN 32 +#define NET_DV 0x06 /* Data version for isdn_net_ioctl_cfg */ +#define TTY_DV 0x06 /* Data version for iprofd etc. */ + +#define INF_DV 0x01 /* Data version for /dev/isdninfo */ + +typedef struct { + char drvid[25]; + unsigned long arg; +} isdn_ioctl_struct; + +typedef struct { + char name[10]; + char phone[ISDN_MSNLEN]; + int outgoing; +} isdn_net_ioctl_phone; + +typedef struct { + char name[10]; /* Name of interface */ + char master[10]; /* Name of Master for Bundling */ + char slave[10]; /* Name of Slave for Bundling */ + char eaz[256]; /* EAZ/MSN */ + char drvid[25]; /* DriverId for Bindings */ + int onhtime; /* Hangup-Timeout */ + int charge; /* Charge-Units */ + int l2_proto; /* Layer-2 protocol */ + int l3_proto; /* Layer-3 protocol */ + int p_encap; /* Encapsulation */ + int exclusive; /* Channel, if bound exclusive */ + int dialmax; /* Dial Retry-Counter */ + int slavedelay; /* Delay until slave starts up */ + int cbdelay; /* Delay before Callback */ + int chargehup; /* Flag: Charge-Hangup */ + int ihup; /* Flag: Hangup-Timeout on incoming line */ + int secure; /* Flag: Secure */ + int callback; /* Flag: Callback */ + int cbhup; /* Flag: Reject Call before Callback */ + int pppbind; /* ippp device for bindings */ + int chargeint; /* Use fixed charge interval length */ + int triggercps; /* BogoCPS needed for triggering slave */ + int dialtimeout; /* Dial-Timeout */ + int dialwait; /* Time to wait after failed dial */ + int dialmode; /* Flag: off / on / auto */ +} isdn_net_ioctl_cfg; + +#define ISDN_NET_DIALMODE_MASK 0xC0 /* bits for status */ +#define ISDN_NET_DM_OFF 0x00 /* this interface is stopped */ +#define ISDN_NET_DM_MANUAL 0x40 /* this interface is on (manual) */ +#define ISDN_NET_DM_AUTO 0x80 /* this interface is autodial */ +#define ISDN_NET_DIALMODE(x) ((&(x))->flags & ISDN_NET_DIALMODE_MASK) + + +#endif /* _UAPI__ISDN_H__ */ diff --git a/include/uapi/linux/isdn_divertif.h b/include/uapi/linux/isdn_divertif.h new file mode 100644 index 00000000000..3e3c2d89841 --- /dev/null +++ b/include/uapi/linux/isdn_divertif.h @@ -0,0 +1,30 @@ +/* $Id: isdn_divertif.h,v 1.4.6.1 2001/09/23 22:25:05 kai Exp $ + * + * Header for the diversion supplementary interface for i4l. + * + * Author Werner Cornelius (werner@titro.de) + * Copyright by Werner Cornelius (werner@titro.de) + * + * This software may be used and distributed according to the terms + * of the GNU General Public License, incorporated herein by reference. + * + */ + +#ifndef _UAPI_LINUX_ISDN_DIVERTIF_H +#define _UAPI_LINUX_ISDN_DIVERTIF_H + +/***********************************************************/ +/* magic value is also used to control version information */ +/***********************************************************/ +#define DIVERT_IF_MAGIC 0x25873401 +#define DIVERT_CMD_REG 0x00 /* register command */ +#define DIVERT_CMD_REL 0x01 /* release command */ +#define DIVERT_NO_ERR 0x00 /* return value no error */ +#define DIVERT_CMD_ERR 0x01 /* invalid cmd */ +#define DIVERT_VER_ERR 0x02 /* magic/version invalid */ +#define DIVERT_REG_ERR 0x03 /* module already registered */ +#define DIVERT_REL_ERR 0x04 /* module not registered */ +#define DIVERT_REG_NAME isdn_register_divert + + +#endif /* _UAPI_LINUX_ISDN_DIVERTIF_H */ diff --git a/include/uapi/linux/isdn_ppp.h b/include/uapi/linux/isdn_ppp.h new file mode 100644 index 00000000000..e7d7bd2aed3 --- /dev/null +++ b/include/uapi/linux/isdn_ppp.h @@ -0,0 +1,67 @@ +/* Linux ISDN subsystem, sync PPP, interface to ipppd + * + * Copyright 1994-1999 by Fritz Elfert (fritz@isdn4linux.de) + * Copyright 1995,96 Thinking Objects Software GmbH Wuerzburg + * Copyright 1995,96 by Michael Hipp (Michael.Hipp@student.uni-tuebingen.de) + * Copyright 2000-2002 by Kai Germaschewski (kai@germaschewski.name) + * + * This software may be used and distributed according to the terms + * of the GNU General Public License, incorporated herein by reference. + * + */ + +#ifndef _UAPI_LINUX_ISDN_PPP_H +#define _UAPI_LINUX_ISDN_PPP_H + +#define CALLTYPE_INCOMING 0x1 +#define CALLTYPE_OUTGOING 0x2 +#define CALLTYPE_CALLBACK 0x4 + +#define IPPP_VERSION "2.2.0" + +struct pppcallinfo +{ + int calltype; + unsigned char local_num[64]; + unsigned char remote_num[64]; + int charge_units; +}; + +#define PPPIOCGCALLINFO _IOWR('t',128,struct pppcallinfo) +#define PPPIOCBUNDLE _IOW('t',129,int) +#define PPPIOCGMPFLAGS _IOR('t',130,int) +#define PPPIOCSMPFLAGS _IOW('t',131,int) +#define PPPIOCSMPMTU _IOW('t',132,int) +#define PPPIOCSMPMRU _IOW('t',133,int) +#define PPPIOCGCOMPRESSORS _IOR('t',134,unsigned long [8]) +#define PPPIOCSCOMPRESSOR _IOW('t',135,int) +#define PPPIOCGIFNAME _IOR('t',136, char [IFNAMSIZ] ) + + +#define SC_MP_PROT 0x00000200 +#define SC_REJ_MP_PROT 0x00000400 +#define SC_OUT_SHORT_SEQ 0x00000800 +#define SC_IN_SHORT_SEQ 0x00004000 + +#define SC_DECOMP_ON 0x01 +#define SC_COMP_ON 0x02 +#define SC_DECOMP_DISCARD 0x04 +#define SC_COMP_DISCARD 0x08 +#define SC_LINK_DECOMP_ON 0x10 +#define SC_LINK_COMP_ON 0x20 +#define SC_LINK_DECOMP_DISCARD 0x40 +#define SC_LINK_COMP_DISCARD 0x80 + +#define ISDN_PPP_COMP_MAX_OPTIONS 16 + +#define IPPP_COMP_FLAG_XMIT 0x1 +#define IPPP_COMP_FLAG_LINK 0x2 + +struct isdn_ppp_comp_data { + int num; + unsigned char options[ISDN_PPP_COMP_MAX_OPTIONS]; + int optlen; + int flags; +}; + +#endif /* _UAPI_LINUX_ISDN_PPP_H */ diff --git a/include/uapi/linux/isdnif.h b/include/uapi/linux/isdnif.h new file mode 100644 index 00000000000..246138c01c4 --- /dev/null +++ b/include/uapi/linux/isdnif.h @@ -0,0 +1,56 @@ +/* $Id: isdnif.h,v 1.43.2.2 2004/01/12 23:08:35 keil Exp $ + * + * Linux ISDN subsystem + * Definition of the interface between the subsystem and its low-level drivers. + * + * Copyright 1994,95,96 by Fritz Elfert (fritz@isdn4linux.de) + * Copyright 1995,96 Thinking Objects Software GmbH Wuerzburg + * + * This software may be used and distributed according to the terms + * of the GNU General Public License, incorporated herein by reference. + * + */ + +#ifndef _UAPI__ISDNIF_H__ +#define _UAPI__ISDNIF_H__ + + +/* + * Values for general protocol-selection + */ +#define ISDN_PTYPE_UNKNOWN 0 /* Protocol undefined */ +#define ISDN_PTYPE_1TR6 1 /* german 1TR6-protocol */ +#define ISDN_PTYPE_EURO 2 /* EDSS1-protocol */ +#define ISDN_PTYPE_LEASED 3 /* for leased lines */ +#define ISDN_PTYPE_NI1 4 /* US NI-1 protocol */ +#define ISDN_PTYPE_MAX 7 /* Max. 8 Protocols */ + +/* + * Values for Layer-2-protocol-selection + */ +#define ISDN_PROTO_L2_X75I 0 /* X75/LAPB with I-Frames */ +#define ISDN_PROTO_L2_X75UI 1 /* X75/LAPB with UI-Frames */ +#define ISDN_PROTO_L2_X75BUI 2 /* X75/LAPB with UI-Frames */ +#define ISDN_PROTO_L2_HDLC 3 /* HDLC */ +#define ISDN_PROTO_L2_TRANS 4 /* Transparent (Voice) */ +#define ISDN_PROTO_L2_X25DTE 5 /* X25/LAPB DTE mode */ +#define ISDN_PROTO_L2_X25DCE 6 /* X25/LAPB DCE mode */ +#define ISDN_PROTO_L2_V11096 7 /* V.110 bitrate adaption 9600 Baud */ +#define ISDN_PROTO_L2_V11019 8 /* V.110 bitrate adaption 19200 Baud */ +#define ISDN_PROTO_L2_V11038 9 /* V.110 bitrate adaption 38400 Baud */ +#define ISDN_PROTO_L2_MODEM 10 /* Analog Modem on Board */ +#define ISDN_PROTO_L2_FAX 11 /* Fax Group 2/3 */ +#define ISDN_PROTO_L2_HDLC_56K 12 /* HDLC 56k */ +#define ISDN_PROTO_L2_MAX 15 /* Max. 16 Protocols */ + +/* + * Values for Layer-3-protocol-selection + */ +#define ISDN_PROTO_L3_TRANS 0 /* Transparent */ +#define ISDN_PROTO_L3_TRANSDSP 1 /* Transparent with DSP */ +#define ISDN_PROTO_L3_FCLASS2 2 /* Fax Group 2/3 CLASS 2 */ +#define ISDN_PROTO_L3_FCLASS1 3 /* Fax Group 2/3 CLASS 1 */ +#define ISDN_PROTO_L3_MAX 7 /* Max. 8 Protocols */ + + +#endif /* _UAPI__ISDNIF_H__ */ diff --git a/include/linux/iso_fs.h b/include/uapi/linux/iso_fs.h index 4688ac4284e..4688ac4284e 100644 --- a/include/linux/iso_fs.h +++ b/include/uapi/linux/iso_fs.h diff --git a/include/linux/ivtv.h b/include/uapi/linux/ivtv.h index 42bf725751a..42bf725751a 100644 --- a/include/linux/ivtv.h +++ b/include/uapi/linux/ivtv.h diff --git a/include/linux/ivtvfb.h b/include/uapi/linux/ivtvfb.h index e8b92f67f10..e8b92f67f10 100644 --- a/include/linux/ivtvfb.h +++ b/include/uapi/linux/ivtvfb.h diff --git a/include/linux/ixjuser.h b/include/uapi/linux/ixjuser.h index 94ab5e942e5..94ab5e942e5 100644 --- a/include/linux/ixjuser.h +++ b/include/uapi/linux/ixjuser.h diff --git a/include/linux/jffs2.h b/include/uapi/linux/jffs2.h index a18b719f49d..a18b719f49d 100644 --- a/include/linux/jffs2.h +++ b/include/uapi/linux/jffs2.h diff --git a/include/uapi/linux/joystick.h b/include/uapi/linux/joystick.h new file mode 100644 index 00000000000..b856fd11c70 --- /dev/null +++ b/include/uapi/linux/joystick.h @@ -0,0 +1,136 @@ +/* + * Copyright (C) 1996-2000 Vojtech Pavlik + * + * Sponsored by SuSE + */ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Should you need to contact me, the author, you can do so either by + * e-mail - mail your message to <vojtech@suse.cz>, or by paper mail: + * Vojtech Pavlik, Ucitelska 1576, Prague 8, 182 00 Czech Republic + */ +#ifndef _UAPI_LINUX_JOYSTICK_H +#define _UAPI_LINUX_JOYSTICK_H + + + +#include <linux/types.h> +#include <linux/input.h> + +/* + * Version + */ + +#define JS_VERSION 0x020100 + +/* + * Types and constants for reading from /dev/js + */ + +#define JS_EVENT_BUTTON 0x01 /* button pressed/released */ +#define JS_EVENT_AXIS 0x02 /* joystick moved */ +#define JS_EVENT_INIT 0x80 /* initial state of device */ + +struct js_event { + __u32 time; /* event timestamp in milliseconds */ + __s16 value; /* value */ + __u8 type; /* event type */ + __u8 number; /* axis/button number */ +}; + +/* + * IOCTL commands for joystick driver + */ + +#define JSIOCGVERSION _IOR('j', 0x01, __u32) /* get driver version */ + +#define JSIOCGAXES _IOR('j', 0x11, __u8) /* get number of axes */ +#define JSIOCGBUTTONS _IOR('j', 0x12, __u8) /* get number of buttons */ +#define JSIOCGNAME(len) _IOC(_IOC_READ, 'j', 0x13, len) /* get identifier string */ + +#define JSIOCSCORR _IOW('j', 0x21, struct js_corr) /* set correction values */ +#define JSIOCGCORR _IOR('j', 0x22, struct js_corr) /* get correction values */ + +#define JSIOCSAXMAP _IOW('j', 0x31, __u8[ABS_CNT]) /* set axis mapping */ +#define JSIOCGAXMAP _IOR('j', 0x32, __u8[ABS_CNT]) /* get axis mapping */ +#define JSIOCSBTNMAP _IOW('j', 0x33, __u16[KEY_MAX - BTN_MISC + 1]) /* set button mapping */ +#define JSIOCGBTNMAP _IOR('j', 0x34, __u16[KEY_MAX - BTN_MISC + 1]) /* get button mapping */ + +/* + * Types and constants for get/set correction + */ + +#define JS_CORR_NONE 0x00 /* returns raw values */ +#define JS_CORR_BROKEN 0x01 /* broken line */ + +struct js_corr { + __s32 coef[8]; + __s16 prec; + __u16 type; +}; + +/* + * v0.x compatibility definitions + */ + +#define JS_RETURN sizeof(struct JS_DATA_TYPE) +#define JS_TRUE 1 +#define JS_FALSE 0 +#define JS_X_0 0x01 +#define JS_Y_0 0x02 +#define JS_X_1 0x04 +#define JS_Y_1 0x08 +#define JS_MAX 2 + +#define JS_DEF_TIMEOUT 0x1300 +#define JS_DEF_CORR 0 +#define JS_DEF_TIMELIMIT 10L + +#define JS_SET_CAL 1 +#define JS_GET_CAL 2 +#define JS_SET_TIMEOUT 3 +#define JS_GET_TIMEOUT 4 +#define JS_SET_TIMELIMIT 5 +#define JS_GET_TIMELIMIT 6 +#define JS_GET_ALL 7 +#define JS_SET_ALL 8 + +struct JS_DATA_TYPE { + __s32 buttons; + __s32 x; + __s32 y; +}; + +struct JS_DATA_SAVE_TYPE_32 { + __s32 JS_TIMEOUT; + __s32 BUSY; + __s32 JS_EXPIRETIME; + __s32 JS_TIMELIMIT; + struct JS_DATA_TYPE JS_SAVE; + struct JS_DATA_TYPE JS_CORR; +}; + +struct JS_DATA_SAVE_TYPE_64 { + __s32 JS_TIMEOUT; + __s32 BUSY; + __s64 JS_EXPIRETIME; + __s64 JS_TIMELIMIT; + struct JS_DATA_TYPE JS_SAVE; + struct JS_DATA_TYPE JS_CORR; +}; + + +#endif /* _UAPI_LINUX_JOYSTICK_H */ diff --git a/include/uapi/linux/kd.h b/include/uapi/linux/kd.h new file mode 100644 index 00000000000..87b7cc439d7 --- /dev/null +++ b/include/uapi/linux/kd.h @@ -0,0 +1,183 @@ +#ifndef _UAPI_LINUX_KD_H +#define _UAPI_LINUX_KD_H +#include <linux/types.h> +#include <linux/compiler.h> + +/* 0x4B is 'K', to avoid collision with termios and vt */ + +#define GIO_FONT 0x4B60 /* gets font in expanded form */ +#define PIO_FONT 0x4B61 /* use font in expanded form */ + +#define GIO_FONTX 0x4B6B /* get font using struct consolefontdesc */ +#define PIO_FONTX 0x4B6C /* set font using struct consolefontdesc */ +struct consolefontdesc { + unsigned short charcount; /* characters in font (256 or 512) */ + unsigned short charheight; /* scan lines per character (1-32) */ + char __user *chardata; /* font data in expanded form */ +}; + +#define PIO_FONTRESET 0x4B6D /* reset to default font */ + +#define GIO_CMAP 0x4B70 /* gets colour palette on VGA+ */ +#define PIO_CMAP 0x4B71 /* sets colour palette on VGA+ */ + +#define KIOCSOUND 0x4B2F /* start sound generation (0 for off) */ +#define KDMKTONE 0x4B30 /* generate tone */ + +#define KDGETLED 0x4B31 /* return current led state */ +#define KDSETLED 0x4B32 /* set led state [lights, not flags] */ +#define LED_SCR 0x01 /* scroll lock led */ +#define LED_NUM 0x02 /* num lock led */ +#define LED_CAP 0x04 /* caps lock led */ + +#define KDGKBTYPE 0x4B33 /* get keyboard type */ +#define KB_84 0x01 +#define KB_101 0x02 /* this is what we always answer */ +#define KB_OTHER 0x03 + +#define KDADDIO 0x4B34 /* add i/o port as valid */ +#define KDDELIO 0x4B35 /* del i/o port as valid */ +#define KDENABIO 0x4B36 /* enable i/o to video board */ +#define KDDISABIO 0x4B37 /* disable i/o to video board */ + +#define KDSETMODE 0x4B3A /* set text/graphics mode */ +#define KD_TEXT 0x00 +#define KD_GRAPHICS 0x01 +#define KD_TEXT0 0x02 /* obsolete */ +#define KD_TEXT1 0x03 /* obsolete */ +#define KDGETMODE 0x4B3B /* get current mode */ + +#define KDMAPDISP 0x4B3C /* map display into address space */ +#define KDUNMAPDISP 0x4B3D /* unmap display from address space */ + +typedef char scrnmap_t; +#define E_TABSZ 256 +#define GIO_SCRNMAP 0x4B40 /* get screen mapping from kernel */ +#define PIO_SCRNMAP 0x4B41 /* put screen mapping table in kernel */ +#define GIO_UNISCRNMAP 0x4B69 /* get full Unicode screen mapping */ +#define PIO_UNISCRNMAP 0x4B6A /* set full Unicode screen mapping */ + +#define GIO_UNIMAP 0x4B66 /* get unicode-to-font mapping from kernel */ +struct unipair { + unsigned short unicode; + unsigned short fontpos; +}; +struct unimapdesc { + unsigned short entry_ct; + struct unipair __user *entries; +}; +#define PIO_UNIMAP 0x4B67 /* put unicode-to-font mapping in kernel */ +#define PIO_UNIMAPCLR 0x4B68 /* clear table, possibly advise hash algorithm */ +struct unimapinit { + unsigned short advised_hashsize; /* 0 if no opinion */ + unsigned short advised_hashstep; /* 0 if no opinion */ + unsigned short advised_hashlevel; /* 0 if no opinion */ +}; + +#define UNI_DIRECT_BASE 0xF000 /* start of Direct Font Region */ +#define UNI_DIRECT_MASK 0x01FF /* Direct Font Region bitmask */ + +#define K_RAW 0x00 +#define K_XLATE 0x01 +#define K_MEDIUMRAW 0x02 +#define K_UNICODE 0x03 +#define K_OFF 0x04 +#define KDGKBMODE 0x4B44 /* gets current keyboard mode */ +#define KDSKBMODE 0x4B45 /* sets current keyboard mode */ + +#define K_METABIT 0x03 +#define K_ESCPREFIX 0x04 +#define KDGKBMETA 0x4B62 /* gets meta key handling mode */ +#define KDSKBMETA 0x4B63 /* sets meta key handling mode */ + +#define K_SCROLLLOCK 0x01 +#define K_NUMLOCK 0x02 +#define K_CAPSLOCK 0x04 +#define KDGKBLED 0x4B64 /* get led flags (not lights) */ +#define KDSKBLED 0x4B65 /* set led flags (not lights) */ + +struct kbentry { + unsigned char kb_table; + unsigned char kb_index; + unsigned short kb_value; +}; +#define K_NORMTAB 0x00 +#define K_SHIFTTAB 0x01 +#define K_ALTTAB 0x02 +#define K_ALTSHIFTTAB 0x03 + +#define KDGKBENT 0x4B46 /* gets one entry in translation table */ +#define KDSKBENT 0x4B47 /* sets one entry in translation table */ + +struct kbsentry { + unsigned char kb_func; + unsigned char kb_string[512]; +}; +#define KDGKBSENT 0x4B48 /* gets one function key string entry */ +#define KDSKBSENT 0x4B49 /* sets one function key string entry */ + +struct kbdiacr { + unsigned char diacr, base, result; +}; +struct kbdiacrs { + unsigned int kb_cnt; /* number of entries in following array */ + struct kbdiacr kbdiacr[256]; /* MAX_DIACR from keyboard.h */ +}; +#define KDGKBDIACR 0x4B4A /* read kernel accent table */ +#define KDSKBDIACR 0x4B4B /* write kernel accent table */ + +struct kbdiacruc { + unsigned int diacr, base, result; +}; +struct kbdiacrsuc { + unsigned int kb_cnt; /* number of entries in following array */ + struct kbdiacruc kbdiacruc[256]; /* MAX_DIACR from keyboard.h */ +}; +#define KDGKBDIACRUC 0x4BFA /* read kernel accent table - UCS */ +#define KDSKBDIACRUC 0x4BFB /* write kernel accent table - UCS */ + +struct kbkeycode { + unsigned int scancode, keycode; +}; +#define KDGETKEYCODE 0x4B4C /* read kernel keycode table entry */ +#define KDSETKEYCODE 0x4B4D /* write kernel keycode table entry */ + +#define KDSIGACCEPT 0x4B4E /* accept kbd generated signals */ + +struct kbd_repeat { + int delay; /* in msec; <= 0: don't change */ + int period; /* in msec; <= 0: don't change */ + /* earlier this field was misnamed "rate" */ +}; + +#define KDKBDREP 0x4B52 /* set keyboard delay/repeat rate; + * actually used values are returned */ + +#define KDFONTOP 0x4B72 /* font operations */ + +struct console_font_op { + unsigned int op; /* operation code KD_FONT_OP_* */ + unsigned int flags; /* KD_FONT_FLAG_* */ + unsigned int width, height; /* font size */ + unsigned int charcount; + unsigned char __user *data; /* font data with height fixed to 32 */ +}; + +struct console_font { + unsigned int width, height; /* font size */ + unsigned int charcount; + unsigned char *data; /* font data with height fixed to 32 */ +}; + +#define KD_FONT_OP_SET 0 /* Set font */ +#define KD_FONT_OP_GET 1 /* Get font */ +#define KD_FONT_OP_SET_DEFAULT 2 /* Set font to default, data points to name / NULL */ +#define KD_FONT_OP_COPY 3 /* Copy from another console */ + +#define KD_FONT_FLAG_DONT_RECALC 1 /* Don't recalculate hw charcell size [compat] */ + +/* note: 0x4B00-0x4B4E all have had a value at some time; + don't reuse for the time being */ +/* note: 0x4B60-0x4B6D, 0x4B70-0x4B72 used above */ + +#endif /* _UAPI_LINUX_KD_H */ diff --git a/include/uapi/linux/kdev_t.h b/include/uapi/linux/kdev_t.h new file mode 100644 index 00000000000..0d881fa7eb9 --- /dev/null +++ b/include/uapi/linux/kdev_t.h @@ -0,0 +1,13 @@ +#ifndef _UAPI_LINUX_KDEV_T_H +#define _UAPI_LINUX_KDEV_T_H +#ifndef __KERNEL__ + +/* +Some programs want their definitions of MAJOR and MINOR and MKDEV +from the kernel sources. These must be the externally visible ones. +*/ +#define MAJOR(dev) ((dev)>>8) +#define MINOR(dev) ((dev) & 0xff) +#define MKDEV(ma,mi) ((ma)<<8 | (mi)) +#endif /* __KERNEL__ */ +#endif /* _UAPI_LINUX_KDEV_T_H */ diff --git a/include/uapi/linux/kernel-page-flags.h b/include/uapi/linux/kernel-page-flags.h new file mode 100644 index 00000000000..5116a0e4817 --- /dev/null +++ b/include/uapi/linux/kernel-page-flags.h @@ -0,0 +1,36 @@ +#ifndef _UAPILINUX_KERNEL_PAGE_FLAGS_H +#define _UAPILINUX_KERNEL_PAGE_FLAGS_H + +/* + * Stable page flag bits exported to user space + */ + +#define KPF_LOCKED 0 +#define KPF_ERROR 1 +#define KPF_REFERENCED 2 +#define KPF_UPTODATE 3 +#define KPF_DIRTY 4 +#define KPF_LRU 5 +#define KPF_ACTIVE 6 +#define KPF_SLAB 7 +#define KPF_WRITEBACK 8 +#define KPF_RECLAIM 9 +#define KPF_BUDDY 10 + +/* 11-20: new additions in 2.6.31 */ +#define KPF_MMAP 11 +#define KPF_ANON 12 +#define KPF_SWAPCACHE 13 +#define KPF_SWAPBACKED 14 +#define KPF_COMPOUND_HEAD 15 +#define KPF_COMPOUND_TAIL 16 +#define KPF_HUGE 17 +#define KPF_UNEVICTABLE 18 +#define KPF_HWPOISON 19 +#define KPF_NOPAGE 20 + +#define KPF_KSM 21 +#define KPF_THP 22 + + +#endif /* _UAPILINUX_KERNEL_PAGE_FLAGS_H */ diff --git a/include/uapi/linux/kernel.h b/include/uapi/linux/kernel.h new file mode 100644 index 00000000000..321e399457f --- /dev/null +++ b/include/uapi/linux/kernel.h @@ -0,0 +1,13 @@ +#ifndef _UAPI_LINUX_KERNEL_H +#define _UAPI_LINUX_KERNEL_H + +#include <linux/sysinfo.h> + +/* + * 'kernel.h' contains some often-used function prototypes etc + */ +#define __ALIGN_KERNEL(x, a) __ALIGN_KERNEL_MASK(x, (typeof(x))(a) - 1) +#define __ALIGN_KERNEL_MASK(x, mask) (((x) + (mask)) & ~(mask)) + + +#endif /* _UAPI_LINUX_KERNEL_H */ diff --git a/include/uapi/linux/kernelcapi.h b/include/uapi/linux/kernelcapi.h new file mode 100644 index 00000000000..89bf40d36d2 --- /dev/null +++ b/include/uapi/linux/kernelcapi.h @@ -0,0 +1,47 @@ +/* + * $Id: kernelcapi.h,v 1.8.6.2 2001/02/07 11:31:31 kai Exp $ + * + * Kernel CAPI 2.0 Interface for Linux + * + * (c) Copyright 1997 by Carsten Paeth (calle@calle.in-berlin.de) + * + */ + +#ifndef _UAPI__KERNELCAPI_H__ +#define _UAPI__KERNELCAPI_H__ + +#define CAPI_MAXAPPL 240 /* maximum number of applications */ +#define CAPI_MAXCONTR 32 /* maximum number of controller */ +#define CAPI_MAXDATAWINDOW 8 + + +typedef struct kcapi_flagdef { + int contr; + int flag; +} kcapi_flagdef; + +typedef struct kcapi_carddef { + char driver[32]; + unsigned int port; + unsigned irq; + unsigned int membase; + int cardnr; +} kcapi_carddef; + +/* new ioctls >= 10 */ +#define KCAPI_CMD_TRACE 10 +#define KCAPI_CMD_ADDCARD 11 /* OBSOLETE */ + +/* + * flag > 2 => trace also data + * flag & 1 => show trace + */ +#define KCAPI_TRACE_OFF 0 +#define KCAPI_TRACE_SHORT_NO_DATA 1 +#define KCAPI_TRACE_FULL_NO_DATA 2 +#define KCAPI_TRACE_SHORT 3 +#define KCAPI_TRACE_FULL 4 + + + +#endif /* _UAPI__KERNELCAPI_H__ */ diff --git a/include/uapi/linux/kexec.h b/include/uapi/linux/kexec.h new file mode 100644 index 00000000000..104838f65bc --- /dev/null +++ b/include/uapi/linux/kexec.h @@ -0,0 +1,54 @@ +#ifndef _UAPILINUX_KEXEC_H +#define _UAPILINUX_KEXEC_H + +/* kexec system call - It loads the new kernel to boot into. + * kexec does not sync, or unmount filesystems so if you need + * that to happen you need to do that yourself. + */ + +#include <linux/types.h> + +/* kexec flags for different usage scenarios */ +#define KEXEC_ON_CRASH 0x00000001 +#define KEXEC_PRESERVE_CONTEXT 0x00000002 +#define KEXEC_ARCH_MASK 0xffff0000 + +/* These values match the ELF architecture values. + * Unless there is a good reason that should continue to be the case. + */ +#define KEXEC_ARCH_DEFAULT ( 0 << 16) +#define KEXEC_ARCH_386 ( 3 << 16) +#define KEXEC_ARCH_X86_64 (62 << 16) +#define KEXEC_ARCH_PPC (20 << 16) +#define KEXEC_ARCH_PPC64 (21 << 16) +#define KEXEC_ARCH_IA_64 (50 << 16) +#define KEXEC_ARCH_ARM (40 << 16) +#define KEXEC_ARCH_S390 (22 << 16) +#define KEXEC_ARCH_SH (42 << 16) +#define KEXEC_ARCH_MIPS_LE (10 << 16) +#define KEXEC_ARCH_MIPS ( 8 << 16) + +/* The artificial cap on the number of segments passed to kexec_load. */ +#define KEXEC_SEGMENT_MAX 16 + +#ifndef __KERNEL__ +/* + * This structure is used to hold the arguments that are used when + * loading kernel binaries. + */ +struct kexec_segment { + const void *buf; + size_t bufsz; + const void *mem; + size_t memsz; +}; + +/* Load a new kernel image as described by the kexec_segment array + * consisting of passed number of segments at the entry-point address. + * The flags allow different useage types. + */ +extern int kexec_load(void *, size_t, struct kexec_segment *, + unsigned long int); +#endif /* __KERNEL__ */ + +#endif /* _UAPILINUX_KEXEC_H */ diff --git a/include/uapi/linux/keyboard.h b/include/uapi/linux/keyboard.h new file mode 100644 index 00000000000..5a6849721ab --- /dev/null +++ b/include/uapi/linux/keyboard.h @@ -0,0 +1,443 @@ +#ifndef _UAPI__LINUX_KEYBOARD_H +#define _UAPI__LINUX_KEYBOARD_H + +#include <linux/wait.h> + +#define KG_SHIFT 0 +#define KG_CTRL 2 +#define KG_ALT 3 +#define KG_ALTGR 1 +#define KG_SHIFTL 4 +#define KG_KANASHIFT 4 +#define KG_SHIFTR 5 +#define KG_CTRLL 6 +#define KG_CTRLR 7 +#define KG_CAPSSHIFT 8 + +#define NR_SHIFT 9 + +#define NR_KEYS 256 +#define MAX_NR_KEYMAPS 256 +/* This means 128Kb if all keymaps are allocated. Only the superuser + may increase the number of keymaps beyond MAX_NR_OF_USER_KEYMAPS. */ +#define MAX_NR_OF_USER_KEYMAPS 256 /* should be at least 7 */ + + +#define MAX_NR_FUNC 256 /* max nr of strings assigned to keys */ + +#define KT_LATIN 0 /* we depend on this being zero */ +#define KT_LETTER 11 /* symbol that can be acted upon by CapsLock */ +#define KT_FN 1 +#define KT_SPEC 2 +#define KT_PAD 3 +#define KT_DEAD 4 +#define KT_CONS 5 +#define KT_CUR 6 +#define KT_SHIFT 7 +#define KT_META 8 +#define KT_ASCII 9 +#define KT_LOCK 10 +#define KT_SLOCK 12 +#define KT_DEAD2 13 +#define KT_BRL 14 + +#define K(t,v) (((t)<<8)|(v)) +#define KTYP(x) ((x) >> 8) +#define KVAL(x) ((x) & 0xff) + +#define K_F1 K(KT_FN,0) +#define K_F2 K(KT_FN,1) +#define K_F3 K(KT_FN,2) +#define K_F4 K(KT_FN,3) +#define K_F5 K(KT_FN,4) +#define K_F6 K(KT_FN,5) +#define K_F7 K(KT_FN,6) +#define K_F8 K(KT_FN,7) +#define K_F9 K(KT_FN,8) +#define K_F10 K(KT_FN,9) +#define K_F11 K(KT_FN,10) +#define K_F12 K(KT_FN,11) +#define K_F13 K(KT_FN,12) +#define K_F14 K(KT_FN,13) +#define K_F15 K(KT_FN,14) +#define K_F16 K(KT_FN,15) +#define K_F17 K(KT_FN,16) +#define K_F18 K(KT_FN,17) +#define K_F19 K(KT_FN,18) +#define K_F20 K(KT_FN,19) +#define K_FIND K(KT_FN,20) +#define K_INSERT K(KT_FN,21) +#define K_REMOVE K(KT_FN,22) +#define K_SELECT K(KT_FN,23) +#define K_PGUP K(KT_FN,24) /* PGUP is a synonym for PRIOR */ +#define K_PGDN K(KT_FN,25) /* PGDN is a synonym for NEXT */ +#define K_MACRO K(KT_FN,26) +#define K_HELP K(KT_FN,27) +#define K_DO K(KT_FN,28) +#define K_PAUSE K(KT_FN,29) +#define K_F21 K(KT_FN,30) +#define K_F22 K(KT_FN,31) +#define K_F23 K(KT_FN,32) +#define K_F24 K(KT_FN,33) +#define K_F25 K(KT_FN,34) +#define K_F26 K(KT_FN,35) +#define K_F27 K(KT_FN,36) +#define K_F28 K(KT_FN,37) +#define K_F29 K(KT_FN,38) +#define K_F30 K(KT_FN,39) +#define K_F31 K(KT_FN,40) +#define K_F32 K(KT_FN,41) +#define K_F33 K(KT_FN,42) +#define K_F34 K(KT_FN,43) +#define K_F35 K(KT_FN,44) +#define K_F36 K(KT_FN,45) +#define K_F37 K(KT_FN,46) +#define K_F38 K(KT_FN,47) +#define K_F39 K(KT_FN,48) +#define K_F40 K(KT_FN,49) +#define K_F41 K(KT_FN,50) +#define K_F42 K(KT_FN,51) +#define K_F43 K(KT_FN,52) +#define K_F44 K(KT_FN,53) +#define K_F45 K(KT_FN,54) +#define K_F46 K(KT_FN,55) +#define K_F47 K(KT_FN,56) +#define K_F48 K(KT_FN,57) +#define K_F49 K(KT_FN,58) +#define K_F50 K(KT_FN,59) +#define K_F51 K(KT_FN,60) +#define K_F52 K(KT_FN,61) +#define K_F53 K(KT_FN,62) +#define K_F54 K(KT_FN,63) +#define K_F55 K(KT_FN,64) +#define K_F56 K(KT_FN,65) +#define K_F57 K(KT_FN,66) +#define K_F58 K(KT_FN,67) +#define K_F59 K(KT_FN,68) +#define K_F60 K(KT_FN,69) +#define K_F61 K(KT_FN,70) +#define K_F62 K(KT_FN,71) +#define K_F63 K(KT_FN,72) +#define K_F64 K(KT_FN,73) +#define K_F65 K(KT_FN,74) +#define K_F66 K(KT_FN,75) +#define K_F67 K(KT_FN,76) +#define K_F68 K(KT_FN,77) +#define K_F69 K(KT_FN,78) +#define K_F70 K(KT_FN,79) +#define K_F71 K(KT_FN,80) +#define K_F72 K(KT_FN,81) +#define K_F73 K(KT_FN,82) +#define K_F74 K(KT_FN,83) +#define K_F75 K(KT_FN,84) +#define K_F76 K(KT_FN,85) +#define K_F77 K(KT_FN,86) +#define K_F78 K(KT_FN,87) +#define K_F79 K(KT_FN,88) +#define K_F80 K(KT_FN,89) +#define K_F81 K(KT_FN,90) +#define K_F82 K(KT_FN,91) +#define K_F83 K(KT_FN,92) +#define K_F84 K(KT_FN,93) +#define K_F85 K(KT_FN,94) +#define K_F86 K(KT_FN,95) +#define K_F87 K(KT_FN,96) +#define K_F88 K(KT_FN,97) +#define K_F89 K(KT_FN,98) +#define K_F90 K(KT_FN,99) +#define K_F91 K(KT_FN,100) +#define K_F92 K(KT_FN,101) +#define K_F93 K(KT_FN,102) +#define K_F94 K(KT_FN,103) +#define K_F95 K(KT_FN,104) +#define K_F96 K(KT_FN,105) +#define K_F97 K(KT_FN,106) +#define K_F98 K(KT_FN,107) +#define K_F99 K(KT_FN,108) +#define K_F100 K(KT_FN,109) +#define K_F101 K(KT_FN,110) +#define K_F102 K(KT_FN,111) +#define K_F103 K(KT_FN,112) +#define K_F104 K(KT_FN,113) +#define K_F105 K(KT_FN,114) +#define K_F106 K(KT_FN,115) +#define K_F107 K(KT_FN,116) +#define K_F108 K(KT_FN,117) +#define K_F109 K(KT_FN,118) +#define K_F110 K(KT_FN,119) +#define K_F111 K(KT_FN,120) +#define K_F112 K(KT_FN,121) +#define K_F113 K(KT_FN,122) +#define K_F114 K(KT_FN,123) +#define K_F115 K(KT_FN,124) +#define K_F116 K(KT_FN,125) +#define K_F117 K(KT_FN,126) +#define K_F118 K(KT_FN,127) +#define K_F119 K(KT_FN,128) +#define K_F120 K(KT_FN,129) +#define K_F121 K(KT_FN,130) +#define K_F122 K(KT_FN,131) +#define K_F123 K(KT_FN,132) +#define K_F124 K(KT_FN,133) +#define K_F125 K(KT_FN,134) +#define K_F126 K(KT_FN,135) +#define K_F127 K(KT_FN,136) +#define K_F128 K(KT_FN,137) +#define K_F129 K(KT_FN,138) +#define K_F130 K(KT_FN,139) +#define K_F131 K(KT_FN,140) +#define K_F132 K(KT_FN,141) +#define K_F133 K(KT_FN,142) +#define K_F134 K(KT_FN,143) +#define K_F135 K(KT_FN,144) +#define K_F136 K(KT_FN,145) +#define K_F137 K(KT_FN,146) +#define K_F138 K(KT_FN,147) +#define K_F139 K(KT_FN,148) +#define K_F140 K(KT_FN,149) +#define K_F141 K(KT_FN,150) +#define K_F142 K(KT_FN,151) +#define K_F143 K(KT_FN,152) +#define K_F144 K(KT_FN,153) +#define K_F145 K(KT_FN,154) +#define K_F146 K(KT_FN,155) +#define K_F147 K(KT_FN,156) +#define K_F148 K(KT_FN,157) +#define K_F149 K(KT_FN,158) +#define K_F150 K(KT_FN,159) +#define K_F151 K(KT_FN,160) +#define K_F152 K(KT_FN,161) +#define K_F153 K(KT_FN,162) +#define K_F154 K(KT_FN,163) +#define K_F155 K(KT_FN,164) +#define K_F156 K(KT_FN,165) +#define K_F157 K(KT_FN,166) +#define K_F158 K(KT_FN,167) +#define K_F159 K(KT_FN,168) +#define K_F160 K(KT_FN,169) +#define K_F161 K(KT_FN,170) +#define K_F162 K(KT_FN,171) +#define K_F163 K(KT_FN,172) +#define K_F164 K(KT_FN,173) +#define K_F165 K(KT_FN,174) +#define K_F166 K(KT_FN,175) +#define K_F167 K(KT_FN,176) +#define K_F168 K(KT_FN,177) +#define K_F169 K(KT_FN,178) +#define K_F170 K(KT_FN,179) +#define K_F171 K(KT_FN,180) +#define K_F172 K(KT_FN,181) +#define K_F173 K(KT_FN,182) +#define K_F174 K(KT_FN,183) +#define K_F175 K(KT_FN,184) +#define K_F176 K(KT_FN,185) +#define K_F177 K(KT_FN,186) +#define K_F178 K(KT_FN,187) +#define K_F179 K(KT_FN,188) +#define K_F180 K(KT_FN,189) +#define K_F181 K(KT_FN,190) +#define K_F182 K(KT_FN,191) +#define K_F183 K(KT_FN,192) +#define K_F184 K(KT_FN,193) +#define K_F185 K(KT_FN,194) +#define K_F186 K(KT_FN,195) +#define K_F187 K(KT_FN,196) +#define K_F188 K(KT_FN,197) +#define K_F189 K(KT_FN,198) +#define K_F190 K(KT_FN,199) +#define K_F191 K(KT_FN,200) +#define K_F192 K(KT_FN,201) +#define K_F193 K(KT_FN,202) +#define K_F194 K(KT_FN,203) +#define K_F195 K(KT_FN,204) +#define K_F196 K(KT_FN,205) +#define K_F197 K(KT_FN,206) +#define K_F198 K(KT_FN,207) +#define K_F199 K(KT_FN,208) +#define K_F200 K(KT_FN,209) +#define K_F201 K(KT_FN,210) +#define K_F202 K(KT_FN,211) +#define K_F203 K(KT_FN,212) +#define K_F204 K(KT_FN,213) +#define K_F205 K(KT_FN,214) +#define K_F206 K(KT_FN,215) +#define K_F207 K(KT_FN,216) +#define K_F208 K(KT_FN,217) +#define K_F209 K(KT_FN,218) +#define K_F210 K(KT_FN,219) +#define K_F211 K(KT_FN,220) +#define K_F212 K(KT_FN,221) +#define K_F213 K(KT_FN,222) +#define K_F214 K(KT_FN,223) +#define K_F215 K(KT_FN,224) +#define K_F216 K(KT_FN,225) +#define K_F217 K(KT_FN,226) +#define K_F218 K(KT_FN,227) +#define K_F219 K(KT_FN,228) +#define K_F220 K(KT_FN,229) +#define K_F221 K(KT_FN,230) +#define K_F222 K(KT_FN,231) +#define K_F223 K(KT_FN,232) +#define K_F224 K(KT_FN,233) +#define K_F225 K(KT_FN,234) +#define K_F226 K(KT_FN,235) +#define K_F227 K(KT_FN,236) +#define K_F228 K(KT_FN,237) +#define K_F229 K(KT_FN,238) +#define K_F230 K(KT_FN,239) +#define K_F231 K(KT_FN,240) +#define K_F232 K(KT_FN,241) +#define K_F233 K(KT_FN,242) +#define K_F234 K(KT_FN,243) +#define K_F235 K(KT_FN,244) +#define K_F236 K(KT_FN,245) +#define K_F237 K(KT_FN,246) +#define K_F238 K(KT_FN,247) +#define K_F239 K(KT_FN,248) +#define K_F240 K(KT_FN,249) +#define K_F241 K(KT_FN,250) +#define K_F242 K(KT_FN,251) +#define K_F243 K(KT_FN,252) +#define K_F244 K(KT_FN,253) +#define K_F245 K(KT_FN,254) +#define K_UNDO K(KT_FN,255) + + +#define K_HOLE K(KT_SPEC,0) +#define K_ENTER K(KT_SPEC,1) +#define K_SH_REGS K(KT_SPEC,2) +#define K_SH_MEM K(KT_SPEC,3) +#define K_SH_STAT K(KT_SPEC,4) +#define K_BREAK K(KT_SPEC,5) +#define K_CONS K(KT_SPEC,6) +#define K_CAPS K(KT_SPEC,7) +#define K_NUM K(KT_SPEC,8) +#define K_HOLD K(KT_SPEC,9) +#define K_SCROLLFORW K(KT_SPEC,10) +#define K_SCROLLBACK K(KT_SPEC,11) +#define K_BOOT K(KT_SPEC,12) +#define K_CAPSON K(KT_SPEC,13) +#define K_COMPOSE K(KT_SPEC,14) +#define K_SAK K(KT_SPEC,15) +#define K_DECRCONSOLE K(KT_SPEC,16) +#define K_INCRCONSOLE K(KT_SPEC,17) +#define K_SPAWNCONSOLE K(KT_SPEC,18) +#define K_BARENUMLOCK K(KT_SPEC,19) + +#define K_ALLOCATED K(KT_SPEC,126) /* dynamically allocated keymap */ +#define K_NOSUCHMAP K(KT_SPEC,127) /* returned by KDGKBENT */ + +#define K_P0 K(KT_PAD,0) +#define K_P1 K(KT_PAD,1) +#define K_P2 K(KT_PAD,2) +#define K_P3 K(KT_PAD,3) +#define K_P4 K(KT_PAD,4) +#define K_P5 K(KT_PAD,5) +#define K_P6 K(KT_PAD,6) +#define K_P7 K(KT_PAD,7) +#define K_P8 K(KT_PAD,8) +#define K_P9 K(KT_PAD,9) +#define K_PPLUS K(KT_PAD,10) /* key-pad plus */ +#define K_PMINUS K(KT_PAD,11) /* key-pad minus */ +#define K_PSTAR K(KT_PAD,12) /* key-pad asterisk (star) */ +#define K_PSLASH K(KT_PAD,13) /* key-pad slash */ +#define K_PENTER K(KT_PAD,14) /* key-pad enter */ +#define K_PCOMMA K(KT_PAD,15) /* key-pad comma: kludge... */ +#define K_PDOT K(KT_PAD,16) /* key-pad dot (period): kludge... */ +#define K_PPLUSMINUS K(KT_PAD,17) /* key-pad plus/minus */ +#define K_PPARENL K(KT_PAD,18) /* key-pad left parenthesis */ +#define K_PPARENR K(KT_PAD,19) /* key-pad right parenthesis */ + +#define NR_PAD 20 + +#define K_DGRAVE K(KT_DEAD,0) +#define K_DACUTE K(KT_DEAD,1) +#define K_DCIRCM K(KT_DEAD,2) +#define K_DTILDE K(KT_DEAD,3) +#define K_DDIERE K(KT_DEAD,4) +#define K_DCEDIL K(KT_DEAD,5) + +#define NR_DEAD 6 + +#define K_DOWN K(KT_CUR,0) +#define K_LEFT K(KT_CUR,1) +#define K_RIGHT K(KT_CUR,2) +#define K_UP K(KT_CUR,3) + +#define K_SHIFT K(KT_SHIFT,KG_SHIFT) +#define K_CTRL K(KT_SHIFT,KG_CTRL) +#define K_ALT K(KT_SHIFT,KG_ALT) +#define K_ALTGR K(KT_SHIFT,KG_ALTGR) +#define K_SHIFTL K(KT_SHIFT,KG_SHIFTL) +#define K_SHIFTR K(KT_SHIFT,KG_SHIFTR) +#define K_CTRLL K(KT_SHIFT,KG_CTRLL) +#define K_CTRLR K(KT_SHIFT,KG_CTRLR) +#define K_CAPSSHIFT K(KT_SHIFT,KG_CAPSSHIFT) + +#define K_ASC0 K(KT_ASCII,0) +#define K_ASC1 K(KT_ASCII,1) +#define K_ASC2 K(KT_ASCII,2) +#define K_ASC3 K(KT_ASCII,3) +#define K_ASC4 K(KT_ASCII,4) +#define K_ASC5 K(KT_ASCII,5) +#define K_ASC6 K(KT_ASCII,6) +#define K_ASC7 K(KT_ASCII,7) +#define K_ASC8 K(KT_ASCII,8) +#define K_ASC9 K(KT_ASCII,9) +#define K_HEX0 K(KT_ASCII,10) +#define K_HEX1 K(KT_ASCII,11) +#define K_HEX2 K(KT_ASCII,12) +#define K_HEX3 K(KT_ASCII,13) +#define K_HEX4 K(KT_ASCII,14) +#define K_HEX5 K(KT_ASCII,15) +#define K_HEX6 K(KT_ASCII,16) +#define K_HEX7 K(KT_ASCII,17) +#define K_HEX8 K(KT_ASCII,18) +#define K_HEX9 K(KT_ASCII,19) +#define K_HEXa K(KT_ASCII,20) +#define K_HEXb K(KT_ASCII,21) +#define K_HEXc K(KT_ASCII,22) +#define K_HEXd K(KT_ASCII,23) +#define K_HEXe K(KT_ASCII,24) +#define K_HEXf K(KT_ASCII,25) + +#define NR_ASCII 26 + +#define K_SHIFTLOCK K(KT_LOCK,KG_SHIFT) +#define K_CTRLLOCK K(KT_LOCK,KG_CTRL) +#define K_ALTLOCK K(KT_LOCK,KG_ALT) +#define K_ALTGRLOCK K(KT_LOCK,KG_ALTGR) +#define K_SHIFTLLOCK K(KT_LOCK,KG_SHIFTL) +#define K_SHIFTRLOCK K(KT_LOCK,KG_SHIFTR) +#define K_CTRLLLOCK K(KT_LOCK,KG_CTRLL) +#define K_CTRLRLOCK K(KT_LOCK,KG_CTRLR) +#define K_CAPSSHIFTLOCK K(KT_LOCK,KG_CAPSSHIFT) + +#define K_SHIFT_SLOCK K(KT_SLOCK,KG_SHIFT) +#define K_CTRL_SLOCK K(KT_SLOCK,KG_CTRL) +#define K_ALT_SLOCK K(KT_SLOCK,KG_ALT) +#define K_ALTGR_SLOCK K(KT_SLOCK,KG_ALTGR) +#define K_SHIFTL_SLOCK K(KT_SLOCK,KG_SHIFTL) +#define K_SHIFTR_SLOCK K(KT_SLOCK,KG_SHIFTR) +#define K_CTRLL_SLOCK K(KT_SLOCK,KG_CTRLL) +#define K_CTRLR_SLOCK K(KT_SLOCK,KG_CTRLR) +#define K_CAPSSHIFT_SLOCK K(KT_SLOCK,KG_CAPSSHIFT) + +#define NR_LOCK 9 + +#define K_BRL_BLANK K(KT_BRL, 0) +#define K_BRL_DOT1 K(KT_BRL, 1) +#define K_BRL_DOT2 K(KT_BRL, 2) +#define K_BRL_DOT3 K(KT_BRL, 3) +#define K_BRL_DOT4 K(KT_BRL, 4) +#define K_BRL_DOT5 K(KT_BRL, 5) +#define K_BRL_DOT6 K(KT_BRL, 6) +#define K_BRL_DOT7 K(KT_BRL, 7) +#define K_BRL_DOT8 K(KT_BRL, 8) +#define K_BRL_DOT9 K(KT_BRL, 9) +#define K_BRL_DOT10 K(KT_BRL, 10) + +#define NR_BRL 11 + +#define MAX_DIACR 256 +#endif /* _UAPI__LINUX_KEYBOARD_H */ diff --git a/include/linux/keyctl.h b/include/uapi/linux/keyctl.h index c9b7f4faf97..c9b7f4faf97 100644 --- a/include/linux/keyctl.h +++ b/include/uapi/linux/keyctl.h diff --git a/include/linux/kvm.h b/include/uapi/linux/kvm.h index 0a6d6ba44c8..0a6d6ba44c8 100644 --- a/include/linux/kvm.h +++ b/include/uapi/linux/kvm.h diff --git a/include/uapi/linux/kvm_para.h b/include/uapi/linux/kvm_para.h new file mode 100644 index 00000000000..cea2c5c72d2 --- /dev/null +++ b/include/uapi/linux/kvm_para.h @@ -0,0 +1,28 @@ +#ifndef _UAPI__LINUX_KVM_PARA_H +#define _UAPI__LINUX_KVM_PARA_H + +/* + * This header file provides a method for making a hypercall to the host + * Architectures should define: + * - kvm_hypercall0, kvm_hypercall1... + * - kvm_arch_para_features + * - kvm_para_available + */ + +/* Return values for hypercalls */ +#define KVM_ENOSYS 1000 +#define KVM_EFAULT EFAULT +#define KVM_E2BIG E2BIG +#define KVM_EPERM EPERM + +#define KVM_HC_VAPIC_POLL_IRQ 1 +#define KVM_HC_MMU_OP 2 +#define KVM_HC_FEATURES 3 +#define KVM_HC_PPC_MAP_MAGIC_PAGE 4 + +/* + * hypercalls use architecture specific + */ +#include <asm/kvm_para.h> + +#endif /* _UAPI__LINUX_KVM_PARA_H */ diff --git a/include/uapi/linux/l2tp.h b/include/uapi/linux/l2tp.h new file mode 100644 index 00000000000..8adb6816032 --- /dev/null +++ b/include/uapi/linux/l2tp.h @@ -0,0 +1,180 @@ +/* + * L2TP-over-IP socket for L2TPv3. + * + * Author: James Chapman <jchapman@katalix.com> + */ + +#ifndef _UAPI_LINUX_L2TP_H_ +#define _UAPI_LINUX_L2TP_H_ + +#include <linux/types.h> +#include <linux/socket.h> +#ifndef __KERNEL__ +#include <netinet/in.h> +#endif + +#define IPPROTO_L2TP 115 + +/** + * struct sockaddr_l2tpip - the sockaddr structure for L2TP-over-IP sockets + * @l2tp_family: address family number AF_L2TPIP. + * @l2tp_addr: protocol specific address information + * @l2tp_conn_id: connection id of tunnel + */ +#define __SOCK_SIZE__ 16 /* sizeof(struct sockaddr) */ +struct sockaddr_l2tpip { + /* The first fields must match struct sockaddr_in */ + __kernel_sa_family_t l2tp_family; /* AF_INET */ + __be16 l2tp_unused; /* INET port number (unused) */ + struct in_addr l2tp_addr; /* Internet address */ + + __u32 l2tp_conn_id; /* Connection ID of tunnel */ + + /* Pad to size of `struct sockaddr'. */ + unsigned char __pad[sizeof(struct sockaddr) - + sizeof(__kernel_sa_family_t) - + sizeof(__be16) - sizeof(struct in_addr) - + sizeof(__u32)]; +}; + +/** + * struct sockaddr_l2tpip6 - the sockaddr structure for L2TP-over-IPv6 sockets + * @l2tp_family: address family number AF_L2TPIP. + * @l2tp_addr: protocol specific address information + * @l2tp_conn_id: connection id of tunnel + */ +struct sockaddr_l2tpip6 { + /* The first fields must match struct sockaddr_in6 */ + __kernel_sa_family_t l2tp_family; /* AF_INET6 */ + __be16 l2tp_unused; /* INET port number (unused) */ + __be32 l2tp_flowinfo; /* IPv6 flow information */ + struct in6_addr l2tp_addr; /* IPv6 address */ + __u32 l2tp_scope_id; /* scope id (new in RFC2553) */ + __u32 l2tp_conn_id; /* Connection ID of tunnel */ +}; + +/***************************************************************************** + * NETLINK_GENERIC netlink family. + *****************************************************************************/ + +/* + * Commands. + * Valid TLVs of each command are:- + * TUNNEL_CREATE - CONN_ID, pw_type, netns, ifname, ipinfo, udpinfo, udpcsum, vlanid + * TUNNEL_DELETE - CONN_ID + * TUNNEL_MODIFY - CONN_ID, udpcsum + * TUNNEL_GETSTATS - CONN_ID, (stats) + * TUNNEL_GET - CONN_ID, (...) + * SESSION_CREATE - SESSION_ID, PW_TYPE, offset, data_seq, cookie, peer_cookie, offset, l2spec + * SESSION_DELETE - SESSION_ID + * SESSION_MODIFY - SESSION_ID, data_seq + * SESSION_GET - SESSION_ID, (...) + * SESSION_GETSTATS - SESSION_ID, (stats) + * + */ +enum { + L2TP_CMD_NOOP, + L2TP_CMD_TUNNEL_CREATE, + L2TP_CMD_TUNNEL_DELETE, + L2TP_CMD_TUNNEL_MODIFY, + L2TP_CMD_TUNNEL_GET, + L2TP_CMD_SESSION_CREATE, + L2TP_CMD_SESSION_DELETE, + L2TP_CMD_SESSION_MODIFY, + L2TP_CMD_SESSION_GET, + __L2TP_CMD_MAX, +}; + +#define L2TP_CMD_MAX (__L2TP_CMD_MAX - 1) + +/* + * ATTR types defined for L2TP + */ +enum { + L2TP_ATTR_NONE, /* no data */ + L2TP_ATTR_PW_TYPE, /* u16, enum l2tp_pwtype */ + L2TP_ATTR_ENCAP_TYPE, /* u16, enum l2tp_encap_type */ + L2TP_ATTR_OFFSET, /* u16 */ + L2TP_ATTR_DATA_SEQ, /* u16 */ + L2TP_ATTR_L2SPEC_TYPE, /* u8, enum l2tp_l2spec_type */ + L2TP_ATTR_L2SPEC_LEN, /* u8, enum l2tp_l2spec_type */ + L2TP_ATTR_PROTO_VERSION, /* u8 */ + L2TP_ATTR_IFNAME, /* string */ + L2TP_ATTR_CONN_ID, /* u32 */ + L2TP_ATTR_PEER_CONN_ID, /* u32 */ + L2TP_ATTR_SESSION_ID, /* u32 */ + L2TP_ATTR_PEER_SESSION_ID, /* u32 */ + L2TP_ATTR_UDP_CSUM, /* u8 */ + L2TP_ATTR_VLAN_ID, /* u16 */ + L2TP_ATTR_COOKIE, /* 0, 4 or 8 bytes */ + L2TP_ATTR_PEER_COOKIE, /* 0, 4 or 8 bytes */ + L2TP_ATTR_DEBUG, /* u32 */ + L2TP_ATTR_RECV_SEQ, /* u8 */ + L2TP_ATTR_SEND_SEQ, /* u8 */ + L2TP_ATTR_LNS_MODE, /* u8 */ + L2TP_ATTR_USING_IPSEC, /* u8 */ + L2TP_ATTR_RECV_TIMEOUT, /* msec */ + L2TP_ATTR_FD, /* int */ + L2TP_ATTR_IP_SADDR, /* u32 */ + L2TP_ATTR_IP_DADDR, /* u32 */ + L2TP_ATTR_UDP_SPORT, /* u16 */ + L2TP_ATTR_UDP_DPORT, /* u16 */ + L2TP_ATTR_MTU, /* u16 */ + L2TP_ATTR_MRU, /* u16 */ + L2TP_ATTR_STATS, /* nested */ + L2TP_ATTR_IP6_SADDR, /* struct in6_addr */ + L2TP_ATTR_IP6_DADDR, /* struct in6_addr */ + __L2TP_ATTR_MAX, +}; + +#define L2TP_ATTR_MAX (__L2TP_ATTR_MAX - 1) + +/* Nested in L2TP_ATTR_STATS */ +enum { + L2TP_ATTR_STATS_NONE, /* no data */ + L2TP_ATTR_TX_PACKETS, /* u64 */ + L2TP_ATTR_TX_BYTES, /* u64 */ + L2TP_ATTR_TX_ERRORS, /* u64 */ + L2TP_ATTR_RX_PACKETS, /* u64 */ + L2TP_ATTR_RX_BYTES, /* u64 */ + L2TP_ATTR_RX_SEQ_DISCARDS, /* u64 */ + L2TP_ATTR_RX_OOS_PACKETS, /* u64 */ + L2TP_ATTR_RX_ERRORS, /* u64 */ + __L2TP_ATTR_STATS_MAX, +}; + +#define L2TP_ATTR_STATS_MAX (__L2TP_ATTR_STATS_MAX - 1) + +enum l2tp_pwtype { + L2TP_PWTYPE_NONE = 0x0000, + L2TP_PWTYPE_ETH_VLAN = 0x0004, + L2TP_PWTYPE_ETH = 0x0005, + L2TP_PWTYPE_PPP = 0x0007, + L2TP_PWTYPE_PPP_AC = 0x0008, + L2TP_PWTYPE_IP = 0x000b, + __L2TP_PWTYPE_MAX +}; + +enum l2tp_l2spec_type { + L2TP_L2SPECTYPE_NONE, + L2TP_L2SPECTYPE_DEFAULT, +}; + +enum l2tp_encap_type { + L2TP_ENCAPTYPE_UDP, + L2TP_ENCAPTYPE_IP, +}; + +enum l2tp_seqmode { + L2TP_SEQ_NONE = 0, + L2TP_SEQ_IP = 1, + L2TP_SEQ_ALL = 2, +}; + +/* + * NETLINK_GENERIC related info + */ +#define L2TP_GENL_NAME "l2tp" +#define L2TP_GENL_VERSION 0x1 + +#endif /* _UAPI_LINUX_L2TP_H_ */ diff --git a/include/linux/limits.h b/include/uapi/linux/limits.h index 2d0f94162fb..2d0f94162fb 100644 --- a/include/linux/limits.h +++ b/include/uapi/linux/limits.h diff --git a/include/uapi/linux/llc.h b/include/uapi/linux/llc.h new file mode 100644 index 00000000000..9c987a40247 --- /dev/null +++ b/include/uapi/linux/llc.h @@ -0,0 +1,84 @@ +/* + * IEEE 802.2 User Interface SAPs for Linux, data structures and indicators. + * + * Copyright (c) 2001 by Jay Schulist <jschlst@samba.org> + * + * This program can be redistributed or modified under the terms of the + * GNU General Public License as published by the Free Software Foundation. + * This program is distributed without any warranty or implied warranty + * of merchantability or fitness for a particular purpose. + * + * See the GNU General Public License for more details. + */ +#ifndef _UAPI__LINUX_LLC_H +#define _UAPI__LINUX_LLC_H + +#include <linux/socket.h> + +#define __LLC_SOCK_SIZE__ 16 /* sizeof(sockaddr_llc), word align. */ +struct sockaddr_llc { + __kernel_sa_family_t sllc_family; /* AF_LLC */ + __kernel_sa_family_t sllc_arphrd; /* ARPHRD_ETHER */ + unsigned char sllc_test; + unsigned char sllc_xid; + unsigned char sllc_ua; /* UA data, only for SOCK_STREAM. */ + unsigned char sllc_sap; + unsigned char sllc_mac[IFHWADDRLEN]; + unsigned char __pad[__LLC_SOCK_SIZE__ - + sizeof(__kernel_sa_family_t) * 2 - + sizeof(unsigned char) * 4 - IFHWADDRLEN]; +}; + +/* sockopt definitions. */ +enum llc_sockopts { + LLC_OPT_UNKNOWN = 0, + LLC_OPT_RETRY, /* max retrans attempts. */ + LLC_OPT_SIZE, /* max PDU size (octets). */ + LLC_OPT_ACK_TMR_EXP, /* ack expire time (secs). */ + LLC_OPT_P_TMR_EXP, /* pf cycle expire time (secs). */ + LLC_OPT_REJ_TMR_EXP, /* rej sent expire time (secs). */ + LLC_OPT_BUSY_TMR_EXP, /* busy state expire time (secs). */ + LLC_OPT_TX_WIN, /* tx window size. */ + LLC_OPT_RX_WIN, /* rx window size. */ + LLC_OPT_PKTINFO, /* ancillary packet information. */ + LLC_OPT_MAX +}; + +#define LLC_OPT_MAX_RETRY 100 +#define LLC_OPT_MAX_SIZE 4196 +#define LLC_OPT_MAX_WIN 127 +#define LLC_OPT_MAX_ACK_TMR_EXP 60 +#define LLC_OPT_MAX_P_TMR_EXP 60 +#define LLC_OPT_MAX_REJ_TMR_EXP 60 +#define LLC_OPT_MAX_BUSY_TMR_EXP 60 + +/* LLC SAP types. */ +#define LLC_SAP_NULL 0x00 /* NULL SAP. */ +#define LLC_SAP_LLC 0x02 /* LLC Sublayer Management. */ +#define LLC_SAP_SNA 0x04 /* SNA Path Control. */ +#define LLC_SAP_PNM 0x0E /* Proway Network Management. */ +#define LLC_SAP_IP 0x06 /* TCP/IP. */ +#define LLC_SAP_BSPAN 0x42 /* Bridge Spanning Tree Proto */ +#define LLC_SAP_MMS 0x4E /* Manufacturing Message Srv. */ +#define LLC_SAP_8208 0x7E /* ISO 8208 */ +#define LLC_SAP_3COM 0x80 /* 3COM. */ +#define LLC_SAP_PRO 0x8E /* Proway Active Station List */ +#define LLC_SAP_SNAP 0xAA /* SNAP. */ +#define LLC_SAP_BANYAN 0xBC /* Banyan. */ +#define LLC_SAP_IPX 0xE0 /* IPX/SPX. */ +#define LLC_SAP_NETBEUI 0xF0 /* NetBEUI. */ +#define LLC_SAP_LANMGR 0xF4 /* LanManager. */ +#define LLC_SAP_IMPL 0xF8 /* IMPL */ +#define LLC_SAP_DISC 0xFC /* Discovery */ +#define LLC_SAP_OSI 0xFE /* OSI Network Layers. */ +#define LLC_SAP_LAR 0xDC /* LAN Address Resolution */ +#define LLC_SAP_RM 0xD4 /* Resource Management */ +#define LLC_SAP_GLOBAL 0xFF /* Global SAP. */ + +struct llc_pktinfo { + int lpi_ifindex; + unsigned char lpi_sap; + unsigned char lpi_mac[IFHWADDRLEN]; +}; + +#endif /* _UAPI__LINUX_LLC_H */ diff --git a/include/uapi/linux/loop.h b/include/uapi/linux/loop.h new file mode 100644 index 00000000000..e0cecd2eabd --- /dev/null +++ b/include/uapi/linux/loop.h @@ -0,0 +1,94 @@ +/* + * include/linux/loop.h + * + * Written by Theodore Ts'o, 3/29/93. + * + * Copyright 1993 by Theodore Ts'o. Redistribution of this file is + * permitted under the GNU General Public License. + */ +#ifndef _UAPI_LINUX_LOOP_H +#define _UAPI_LINUX_LOOP_H + + +#define LO_NAME_SIZE 64 +#define LO_KEY_SIZE 32 + + +/* + * Loop flags + */ +enum { + LO_FLAGS_READ_ONLY = 1, + LO_FLAGS_AUTOCLEAR = 4, + LO_FLAGS_PARTSCAN = 8, +}; + +#include <asm/posix_types.h> /* for __kernel_old_dev_t */ +#include <linux/types.h> /* for __u64 */ + +/* Backwards compatibility version */ +struct loop_info { + int lo_number; /* ioctl r/o */ + __kernel_old_dev_t lo_device; /* ioctl r/o */ + unsigned long lo_inode; /* ioctl r/o */ + __kernel_old_dev_t lo_rdevice; /* ioctl r/o */ + int lo_offset; + int lo_encrypt_type; + int lo_encrypt_key_size; /* ioctl w/o */ + int lo_flags; /* ioctl r/o */ + char lo_name[LO_NAME_SIZE]; + unsigned char lo_encrypt_key[LO_KEY_SIZE]; /* ioctl w/o */ + unsigned long lo_init[2]; + char reserved[4]; +}; + +struct loop_info64 { + __u64 lo_device; /* ioctl r/o */ + __u64 lo_inode; /* ioctl r/o */ + __u64 lo_rdevice; /* ioctl r/o */ + __u64 lo_offset; + __u64 lo_sizelimit;/* bytes, 0 == max available */ + __u32 lo_number; /* ioctl r/o */ + __u32 lo_encrypt_type; + __u32 lo_encrypt_key_size; /* ioctl w/o */ + __u32 lo_flags; /* ioctl r/o */ + __u8 lo_file_name[LO_NAME_SIZE]; + __u8 lo_crypt_name[LO_NAME_SIZE]; + __u8 lo_encrypt_key[LO_KEY_SIZE]; /* ioctl w/o */ + __u64 lo_init[2]; +}; + +/* + * Loop filter types + */ + +#define LO_CRYPT_NONE 0 +#define LO_CRYPT_XOR 1 +#define LO_CRYPT_DES 2 +#define LO_CRYPT_FISH2 3 /* Twofish encryption */ +#define LO_CRYPT_BLOW 4 +#define LO_CRYPT_CAST128 5 +#define LO_CRYPT_IDEA 6 +#define LO_CRYPT_DUMMY 9 +#define LO_CRYPT_SKIPJACK 10 +#define LO_CRYPT_CRYPTOAPI 18 +#define MAX_LO_CRYPT 20 + +/* + * IOCTL commands --- we will commandeer 0x4C ('L') + */ + +#define LOOP_SET_FD 0x4C00 +#define LOOP_CLR_FD 0x4C01 +#define LOOP_SET_STATUS 0x4C02 +#define LOOP_GET_STATUS 0x4C03 +#define LOOP_SET_STATUS64 0x4C04 +#define LOOP_GET_STATUS64 0x4C05 +#define LOOP_CHANGE_FD 0x4C06 +#define LOOP_SET_CAPACITY 0x4C07 + +/* /dev/loop-control interface */ +#define LOOP_CTL_ADD 0x4C80 +#define LOOP_CTL_REMOVE 0x4C81 +#define LOOP_CTL_GET_FREE 0x4C82 +#endif /* _UAPI_LINUX_LOOP_H */ diff --git a/include/uapi/linux/lp.h b/include/uapi/linux/lp.h new file mode 100644 index 00000000000..a3406a51f19 --- /dev/null +++ b/include/uapi/linux/lp.h @@ -0,0 +1,100 @@ +/* + * usr/include/linux/lp.h c.1991-1992 James Wiegand + * many modifications copyright (C) 1992 Michael K. Johnson + * Interrupt support added 1993 Nigel Gamble + * Removed 8255 status defines from inside __KERNEL__ Marcelo Tosatti + */ +#ifndef _UAPI_LINUX_LP_H +#define _UAPI_LINUX_LP_H + + +/* + * Per POSIX guidelines, this module reserves the LP and lp prefixes + * These are the lp_table[minor].flags flags... + */ +#define LP_EXIST 0x0001 +#define LP_SELEC 0x0002 +#define LP_BUSY 0x0004 +#define LP_BUSY_BIT_POS 2 +#define LP_OFFL 0x0008 +#define LP_NOPA 0x0010 +#define LP_ERR 0x0020 +#define LP_ABORT 0x0040 +#define LP_CAREFUL 0x0080 /* obsoleted -arca */ +#define LP_ABORTOPEN 0x0100 + +#define LP_TRUST_IRQ_ 0x0200 /* obsolete */ +#define LP_NO_REVERSE 0x0400 /* No reverse mode available. */ +#define LP_DATA_AVAIL 0x0800 /* Data is available. */ + +/* + * bit defines for 8255 status port + * base + 1 + * accessed with LP_S(minor), which gets the byte... + */ +#define LP_PBUSY 0x80 /* inverted input, active high */ +#define LP_PACK 0x40 /* unchanged input, active low */ +#define LP_POUTPA 0x20 /* unchanged input, active high */ +#define LP_PSELECD 0x10 /* unchanged input, active high */ +#define LP_PERRORP 0x08 /* unchanged input, active low */ + +/* timeout for each character. This is relative to bus cycles -- it + * is the count in a busy loop. THIS IS THE VALUE TO CHANGE if you + * have extremely slow printing, or if the machine seems to slow down + * a lot when you print. If you have slow printing, increase this + * number and recompile, and if your system gets bogged down, decrease + * this number. This can be changed with the tunelp(8) command as well. + */ + +#define LP_INIT_CHAR 1000 + +/* The parallel port specs apparently say that there needs to be + * a .5usec wait before and after the strobe. + */ + +#define LP_INIT_WAIT 1 + +/* This is the amount of time that the driver waits for the printer to + * catch up when the printer's buffer appears to be filled. If you + * want to tune this and have a fast printer (i.e. HPIIIP), decrease + * this number, and if you have a slow printer, increase this number. + * This is in hundredths of a second, the default 2 being .05 second. + * Or use the tunelp(8) command, which is especially nice if you want + * change back and forth between character and graphics printing, which + * are wildly different... + */ + +#define LP_INIT_TIME 2 + +/* IOCTL numbers */ +#define LPCHAR 0x0601 /* corresponds to LP_INIT_CHAR */ +#define LPTIME 0x0602 /* corresponds to LP_INIT_TIME */ +#define LPABORT 0x0604 /* call with TRUE arg to abort on error, + FALSE to retry. Default is retry. */ +#define LPSETIRQ 0x0605 /* call with new IRQ number, + or 0 for polling (no IRQ) */ +#define LPGETIRQ 0x0606 /* get the current IRQ number */ +#define LPWAIT 0x0608 /* corresponds to LP_INIT_WAIT */ +/* NOTE: LPCAREFUL is obsoleted and it' s always the default right now -arca */ +#define LPCAREFUL 0x0609 /* call with TRUE arg to require out-of-paper, off- + line, and error indicators good on all writes, + FALSE to ignore them. Default is ignore. */ +#define LPABORTOPEN 0x060a /* call with TRUE arg to abort open() on error, + FALSE to ignore error. Default is ignore. */ +#define LPGETSTATUS 0x060b /* return LP_S(minor) */ +#define LPRESET 0x060c /* reset printer */ +#ifdef LP_STATS +#define LPGETSTATS 0x060d /* get statistics (struct lp_stats) */ +#endif +#define LPGETFLAGS 0x060e /* get status flags */ +#define LPSETTIMEOUT 0x060f /* set parport timeout */ + +/* timeout for printk'ing a timeout, in jiffies (100ths of a second). + This is also used for re-checking error conditions if LP_ABORT is + not set. This is the default behavior. */ + +#define LP_TIMEOUT_INTERRUPT (60 * HZ) +#define LP_TIMEOUT_POLLED (10 * HZ) + + +#endif /* _UAPI_LINUX_LP_H */ diff --git a/include/linux/magic.h b/include/uapi/linux/magic.h index e15192cb9cf..e15192cb9cf 100644 --- a/include/linux/magic.h +++ b/include/uapi/linux/magic.h diff --git a/include/linux/major.h b/include/uapi/linux/major.h index 6a8ca98c9a9..6a8ca98c9a9 100644 --- a/include/linux/major.h +++ b/include/uapi/linux/major.h diff --git a/include/linux/map_to_7segment.h b/include/uapi/linux/map_to_7segment.h index 12d62a54d47..12d62a54d47 100644 --- a/include/linux/map_to_7segment.h +++ b/include/uapi/linux/map_to_7segment.h diff --git a/include/linux/matroxfb.h b/include/uapi/linux/matroxfb.h index 8c22a893864..8c22a893864 100644 --- a/include/linux/matroxfb.h +++ b/include/uapi/linux/matroxfb.h diff --git a/include/uapi/linux/mdio.h b/include/uapi/linux/mdio.h new file mode 100644 index 00000000000..c94a510a577 --- /dev/null +++ b/include/uapi/linux/mdio.h @@ -0,0 +1,297 @@ +/* + * linux/mdio.h: definitions for MDIO (clause 45) transceivers + * Copyright 2006-2009 Solarflare Communications Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation, incorporated herein by reference. + */ + +#ifndef _UAPI__LINUX_MDIO_H__ +#define _UAPI__LINUX_MDIO_H__ + +#include <linux/types.h> +#include <linux/mii.h> + +/* MDIO Manageable Devices (MMDs). */ +#define MDIO_MMD_PMAPMD 1 /* Physical Medium Attachment/ + * Physical Medium Dependent */ +#define MDIO_MMD_WIS 2 /* WAN Interface Sublayer */ +#define MDIO_MMD_PCS 3 /* Physical Coding Sublayer */ +#define MDIO_MMD_PHYXS 4 /* PHY Extender Sublayer */ +#define MDIO_MMD_DTEXS 5 /* DTE Extender Sublayer */ +#define MDIO_MMD_TC 6 /* Transmission Convergence */ +#define MDIO_MMD_AN 7 /* Auto-Negotiation */ +#define MDIO_MMD_C22EXT 29 /* Clause 22 extension */ +#define MDIO_MMD_VEND1 30 /* Vendor specific 1 */ +#define MDIO_MMD_VEND2 31 /* Vendor specific 2 */ + +/* Generic MDIO registers. */ +#define MDIO_CTRL1 MII_BMCR +#define MDIO_STAT1 MII_BMSR +#define MDIO_DEVID1 MII_PHYSID1 +#define MDIO_DEVID2 MII_PHYSID2 +#define MDIO_SPEED 4 /* Speed ability */ +#define MDIO_DEVS1 5 /* Devices in package */ +#define MDIO_DEVS2 6 +#define MDIO_CTRL2 7 /* 10G control 2 */ +#define MDIO_STAT2 8 /* 10G status 2 */ +#define MDIO_PMA_TXDIS 9 /* 10G PMA/PMD transmit disable */ +#define MDIO_PMA_RXDET 10 /* 10G PMA/PMD receive signal detect */ +#define MDIO_PMA_EXTABLE 11 /* 10G PMA/PMD extended ability */ +#define MDIO_PKGID1 14 /* Package identifier */ +#define MDIO_PKGID2 15 +#define MDIO_AN_ADVERTISE 16 /* AN advertising (base page) */ +#define MDIO_AN_LPA 19 /* AN LP abilities (base page) */ +#define MDIO_PCS_EEE_ABLE 20 /* EEE Capability register */ +#define MDIO_PCS_EEE_WK_ERR 22 /* EEE wake error counter */ +#define MDIO_PHYXS_LNSTAT 24 /* PHY XGXS lane state */ +#define MDIO_AN_EEE_ADV 60 /* EEE advertisement */ +#define MDIO_AN_EEE_LPABLE 61 /* EEE link partner ability */ + +/* Media-dependent registers. */ +#define MDIO_PMA_10GBT_SWAPPOL 130 /* 10GBASE-T pair swap & polarity */ +#define MDIO_PMA_10GBT_TXPWR 131 /* 10GBASE-T TX power control */ +#define MDIO_PMA_10GBT_SNR 133 /* 10GBASE-T SNR margin, lane A. + * Lanes B-D are numbered 134-136. */ +#define MDIO_PMA_10GBR_FECABLE 170 /* 10GBASE-R FEC ability */ +#define MDIO_PCS_10GBX_STAT1 24 /* 10GBASE-X PCS status 1 */ +#define MDIO_PCS_10GBRT_STAT1 32 /* 10GBASE-R/-T PCS status 1 */ +#define MDIO_PCS_10GBRT_STAT2 33 /* 10GBASE-R/-T PCS status 2 */ +#define MDIO_AN_10GBT_CTRL 32 /* 10GBASE-T auto-negotiation control */ +#define MDIO_AN_10GBT_STAT 33 /* 10GBASE-T auto-negotiation status */ + +/* LASI (Link Alarm Status Interrupt) registers, defined by XENPAK MSA. */ +#define MDIO_PMA_LASI_RXCTRL 0x9000 /* RX_ALARM control */ +#define MDIO_PMA_LASI_TXCTRL 0x9001 /* TX_ALARM control */ +#define MDIO_PMA_LASI_CTRL 0x9002 /* LASI control */ +#define MDIO_PMA_LASI_RXSTAT 0x9003 /* RX_ALARM status */ +#define MDIO_PMA_LASI_TXSTAT 0x9004 /* TX_ALARM status */ +#define MDIO_PMA_LASI_STAT 0x9005 /* LASI status */ + +/* Control register 1. */ +/* Enable extended speed selection */ +#define MDIO_CTRL1_SPEEDSELEXT (BMCR_SPEED1000 | BMCR_SPEED100) +/* All speed selection bits */ +#define MDIO_CTRL1_SPEEDSEL (MDIO_CTRL1_SPEEDSELEXT | 0x003c) +#define MDIO_CTRL1_FULLDPLX BMCR_FULLDPLX +#define MDIO_CTRL1_LPOWER BMCR_PDOWN +#define MDIO_CTRL1_RESET BMCR_RESET +#define MDIO_PMA_CTRL1_LOOPBACK 0x0001 +#define MDIO_PMA_CTRL1_SPEED1000 BMCR_SPEED1000 +#define MDIO_PMA_CTRL1_SPEED100 BMCR_SPEED100 +#define MDIO_PCS_CTRL1_LOOPBACK BMCR_LOOPBACK +#define MDIO_PHYXS_CTRL1_LOOPBACK BMCR_LOOPBACK +#define MDIO_AN_CTRL1_RESTART BMCR_ANRESTART +#define MDIO_AN_CTRL1_ENABLE BMCR_ANENABLE +#define MDIO_AN_CTRL1_XNP 0x2000 /* Enable extended next page */ +#define MDIO_PCS_CTRL1_CLKSTOP_EN 0x400 /* Stop the clock during LPI */ + +/* 10 Gb/s */ +#define MDIO_CTRL1_SPEED10G (MDIO_CTRL1_SPEEDSELEXT | 0x00) +/* 10PASS-TS/2BASE-TL */ +#define MDIO_CTRL1_SPEED10P2B (MDIO_CTRL1_SPEEDSELEXT | 0x04) + +/* Status register 1. */ +#define MDIO_STAT1_LPOWERABLE 0x0002 /* Low-power ability */ +#define MDIO_STAT1_LSTATUS BMSR_LSTATUS +#define MDIO_STAT1_FAULT 0x0080 /* Fault */ +#define MDIO_AN_STAT1_LPABLE 0x0001 /* Link partner AN ability */ +#define MDIO_AN_STAT1_ABLE BMSR_ANEGCAPABLE +#define MDIO_AN_STAT1_RFAULT BMSR_RFAULT +#define MDIO_AN_STAT1_COMPLETE BMSR_ANEGCOMPLETE +#define MDIO_AN_STAT1_PAGE 0x0040 /* Page received */ +#define MDIO_AN_STAT1_XNP 0x0080 /* Extended next page status */ + +/* Speed register. */ +#define MDIO_SPEED_10G 0x0001 /* 10G capable */ +#define MDIO_PMA_SPEED_2B 0x0002 /* 2BASE-TL capable */ +#define MDIO_PMA_SPEED_10P 0x0004 /* 10PASS-TS capable */ +#define MDIO_PMA_SPEED_1000 0x0010 /* 1000M capable */ +#define MDIO_PMA_SPEED_100 0x0020 /* 100M capable */ +#define MDIO_PMA_SPEED_10 0x0040 /* 10M capable */ +#define MDIO_PCS_SPEED_10P2B 0x0002 /* 10PASS-TS/2BASE-TL capable */ + +/* Device present registers. */ +#define MDIO_DEVS_PRESENT(devad) (1 << (devad)) +#define MDIO_DEVS_PMAPMD MDIO_DEVS_PRESENT(MDIO_MMD_PMAPMD) +#define MDIO_DEVS_WIS MDIO_DEVS_PRESENT(MDIO_MMD_WIS) +#define MDIO_DEVS_PCS MDIO_DEVS_PRESENT(MDIO_MMD_PCS) +#define MDIO_DEVS_PHYXS MDIO_DEVS_PRESENT(MDIO_MMD_PHYXS) +#define MDIO_DEVS_DTEXS MDIO_DEVS_PRESENT(MDIO_MMD_DTEXS) +#define MDIO_DEVS_TC MDIO_DEVS_PRESENT(MDIO_MMD_TC) +#define MDIO_DEVS_AN MDIO_DEVS_PRESENT(MDIO_MMD_AN) +#define MDIO_DEVS_C22EXT MDIO_DEVS_PRESENT(MDIO_MMD_C22EXT) + +/* Control register 2. */ +#define MDIO_PMA_CTRL2_TYPE 0x000f /* PMA/PMD type selection */ +#define MDIO_PMA_CTRL2_10GBCX4 0x0000 /* 10GBASE-CX4 type */ +#define MDIO_PMA_CTRL2_10GBEW 0x0001 /* 10GBASE-EW type */ +#define MDIO_PMA_CTRL2_10GBLW 0x0002 /* 10GBASE-LW type */ +#define MDIO_PMA_CTRL2_10GBSW 0x0003 /* 10GBASE-SW type */ +#define MDIO_PMA_CTRL2_10GBLX4 0x0004 /* 10GBASE-LX4 type */ +#define MDIO_PMA_CTRL2_10GBER 0x0005 /* 10GBASE-ER type */ +#define MDIO_PMA_CTRL2_10GBLR 0x0006 /* 10GBASE-LR type */ +#define MDIO_PMA_CTRL2_10GBSR 0x0007 /* 10GBASE-SR type */ +#define MDIO_PMA_CTRL2_10GBLRM 0x0008 /* 10GBASE-LRM type */ +#define MDIO_PMA_CTRL2_10GBT 0x0009 /* 10GBASE-T type */ +#define MDIO_PMA_CTRL2_10GBKX4 0x000a /* 10GBASE-KX4 type */ +#define MDIO_PMA_CTRL2_10GBKR 0x000b /* 10GBASE-KR type */ +#define MDIO_PMA_CTRL2_1000BT 0x000c /* 1000BASE-T type */ +#define MDIO_PMA_CTRL2_1000BKX 0x000d /* 1000BASE-KX type */ +#define MDIO_PMA_CTRL2_100BTX 0x000e /* 100BASE-TX type */ +#define MDIO_PMA_CTRL2_10BT 0x000f /* 10BASE-T type */ +#define MDIO_PCS_CTRL2_TYPE 0x0003 /* PCS type selection */ +#define MDIO_PCS_CTRL2_10GBR 0x0000 /* 10GBASE-R type */ +#define MDIO_PCS_CTRL2_10GBX 0x0001 /* 10GBASE-X type */ +#define MDIO_PCS_CTRL2_10GBW 0x0002 /* 10GBASE-W type */ +#define MDIO_PCS_CTRL2_10GBT 0x0003 /* 10GBASE-T type */ + +/* Status register 2. */ +#define MDIO_STAT2_RXFAULT 0x0400 /* Receive fault */ +#define MDIO_STAT2_TXFAULT 0x0800 /* Transmit fault */ +#define MDIO_STAT2_DEVPRST 0xc000 /* Device present */ +#define MDIO_STAT2_DEVPRST_VAL 0x8000 /* Device present value */ +#define MDIO_PMA_STAT2_LBABLE 0x0001 /* PMA loopback ability */ +#define MDIO_PMA_STAT2_10GBEW 0x0002 /* 10GBASE-EW ability */ +#define MDIO_PMA_STAT2_10GBLW 0x0004 /* 10GBASE-LW ability */ +#define MDIO_PMA_STAT2_10GBSW 0x0008 /* 10GBASE-SW ability */ +#define MDIO_PMA_STAT2_10GBLX4 0x0010 /* 10GBASE-LX4 ability */ +#define MDIO_PMA_STAT2_10GBER 0x0020 /* 10GBASE-ER ability */ +#define MDIO_PMA_STAT2_10GBLR 0x0040 /* 10GBASE-LR ability */ +#define MDIO_PMA_STAT2_10GBSR 0x0080 /* 10GBASE-SR ability */ +#define MDIO_PMD_STAT2_TXDISAB 0x0100 /* PMD TX disable ability */ +#define MDIO_PMA_STAT2_EXTABLE 0x0200 /* Extended abilities */ +#define MDIO_PMA_STAT2_RXFLTABLE 0x1000 /* Receive fault ability */ +#define MDIO_PMA_STAT2_TXFLTABLE 0x2000 /* Transmit fault ability */ +#define MDIO_PCS_STAT2_10GBR 0x0001 /* 10GBASE-R capable */ +#define MDIO_PCS_STAT2_10GBX 0x0002 /* 10GBASE-X capable */ +#define MDIO_PCS_STAT2_10GBW 0x0004 /* 10GBASE-W capable */ +#define MDIO_PCS_STAT2_RXFLTABLE 0x1000 /* Receive fault ability */ +#define MDIO_PCS_STAT2_TXFLTABLE 0x2000 /* Transmit fault ability */ + +/* Transmit disable register. */ +#define MDIO_PMD_TXDIS_GLOBAL 0x0001 /* Global PMD TX disable */ +#define MDIO_PMD_TXDIS_0 0x0002 /* PMD TX disable 0 */ +#define MDIO_PMD_TXDIS_1 0x0004 /* PMD TX disable 1 */ +#define MDIO_PMD_TXDIS_2 0x0008 /* PMD TX disable 2 */ +#define MDIO_PMD_TXDIS_3 0x0010 /* PMD TX disable 3 */ + +/* Receive signal detect register. */ +#define MDIO_PMD_RXDET_GLOBAL 0x0001 /* Global PMD RX signal detect */ +#define MDIO_PMD_RXDET_0 0x0002 /* PMD RX signal detect 0 */ +#define MDIO_PMD_RXDET_1 0x0004 /* PMD RX signal detect 1 */ +#define MDIO_PMD_RXDET_2 0x0008 /* PMD RX signal detect 2 */ +#define MDIO_PMD_RXDET_3 0x0010 /* PMD RX signal detect 3 */ + +/* Extended abilities register. */ +#define MDIO_PMA_EXTABLE_10GCX4 0x0001 /* 10GBASE-CX4 ability */ +#define MDIO_PMA_EXTABLE_10GBLRM 0x0002 /* 10GBASE-LRM ability */ +#define MDIO_PMA_EXTABLE_10GBT 0x0004 /* 10GBASE-T ability */ +#define MDIO_PMA_EXTABLE_10GBKX4 0x0008 /* 10GBASE-KX4 ability */ +#define MDIO_PMA_EXTABLE_10GBKR 0x0010 /* 10GBASE-KR ability */ +#define MDIO_PMA_EXTABLE_1000BT 0x0020 /* 1000BASE-T ability */ +#define MDIO_PMA_EXTABLE_1000BKX 0x0040 /* 1000BASE-KX ability */ +#define MDIO_PMA_EXTABLE_100BTX 0x0080 /* 100BASE-TX ability */ +#define MDIO_PMA_EXTABLE_10BT 0x0100 /* 10BASE-T ability */ + +/* PHY XGXS lane state register. */ +#define MDIO_PHYXS_LNSTAT_SYNC0 0x0001 +#define MDIO_PHYXS_LNSTAT_SYNC1 0x0002 +#define MDIO_PHYXS_LNSTAT_SYNC2 0x0004 +#define MDIO_PHYXS_LNSTAT_SYNC3 0x0008 +#define MDIO_PHYXS_LNSTAT_ALIGN 0x1000 + +/* PMA 10GBASE-T pair swap & polarity */ +#define MDIO_PMA_10GBT_SWAPPOL_ABNX 0x0001 /* Pair A/B uncrossed */ +#define MDIO_PMA_10GBT_SWAPPOL_CDNX 0x0002 /* Pair C/D uncrossed */ +#define MDIO_PMA_10GBT_SWAPPOL_AREV 0x0100 /* Pair A polarity reversed */ +#define MDIO_PMA_10GBT_SWAPPOL_BREV 0x0200 /* Pair B polarity reversed */ +#define MDIO_PMA_10GBT_SWAPPOL_CREV 0x0400 /* Pair C polarity reversed */ +#define MDIO_PMA_10GBT_SWAPPOL_DREV 0x0800 /* Pair D polarity reversed */ + +/* PMA 10GBASE-T TX power register. */ +#define MDIO_PMA_10GBT_TXPWR_SHORT 0x0001 /* Short-reach mode */ + +/* PMA 10GBASE-T SNR registers. */ +/* Value is SNR margin in dB, clamped to range [-127, 127], plus 0x8000. */ +#define MDIO_PMA_10GBT_SNR_BIAS 0x8000 +#define MDIO_PMA_10GBT_SNR_MAX 127 + +/* PMA 10GBASE-R FEC ability register. */ +#define MDIO_PMA_10GBR_FECABLE_ABLE 0x0001 /* FEC ability */ +#define MDIO_PMA_10GBR_FECABLE_ERRABLE 0x0002 /* FEC error indic. ability */ + +/* PCS 10GBASE-R/-T status register 1. */ +#define MDIO_PCS_10GBRT_STAT1_BLKLK 0x0001 /* Block lock attained */ + +/* PCS 10GBASE-R/-T status register 2. */ +#define MDIO_PCS_10GBRT_STAT2_ERR 0x00ff +#define MDIO_PCS_10GBRT_STAT2_BER 0x3f00 + +/* AN 10GBASE-T control register. */ +#define MDIO_AN_10GBT_CTRL_ADV10G 0x1000 /* Advertise 10GBASE-T */ + +/* AN 10GBASE-T status register. */ +#define MDIO_AN_10GBT_STAT_LPTRR 0x0200 /* LP training reset req. */ +#define MDIO_AN_10GBT_STAT_LPLTABLE 0x0400 /* LP loop timing ability */ +#define MDIO_AN_10GBT_STAT_LP10G 0x0800 /* LP is 10GBT capable */ +#define MDIO_AN_10GBT_STAT_REMOK 0x1000 /* Remote OK */ +#define MDIO_AN_10GBT_STAT_LOCOK 0x2000 /* Local OK */ +#define MDIO_AN_10GBT_STAT_MS 0x4000 /* Master/slave config */ +#define MDIO_AN_10GBT_STAT_MSFLT 0x8000 /* Master/slave config fault */ + +/* EEE Supported/Advertisement/LP Advertisement registers. + * + * EEE capability Register (3.20), Advertisement (7.60) and + * Link partner ability (7.61) registers have and can use the same identical + * bit masks. + */ +#define MDIO_AN_EEE_ADV_100TX 0x0002 /* Advertise 100TX EEE cap */ +#define MDIO_AN_EEE_ADV_1000T 0x0004 /* Advertise 1000T EEE cap */ +/* Note: the two defines above can be potentially used by the user-land + * and cannot remove them now. + * So, we define the new generic MDIO_EEE_100TX and MDIO_EEE_1000T macros + * using the previous ones (that can be considered obsolete). + */ +#define MDIO_EEE_100TX MDIO_AN_EEE_ADV_100TX /* 100TX EEE cap */ +#define MDIO_EEE_1000T MDIO_AN_EEE_ADV_1000T /* 1000T EEE cap */ +#define MDIO_EEE_10GT 0x0008 /* 10GT EEE cap */ +#define MDIO_EEE_1000KX 0x0010 /* 1000KX EEE cap */ +#define MDIO_EEE_10GKX4 0x0020 /* 10G KX4 EEE cap */ +#define MDIO_EEE_10GKR 0x0040 /* 10G KR EEE cap */ + +/* LASI RX_ALARM control/status registers. */ +#define MDIO_PMA_LASI_RX_PHYXSLFLT 0x0001 /* PHY XS RX local fault */ +#define MDIO_PMA_LASI_RX_PCSLFLT 0x0008 /* PCS RX local fault */ +#define MDIO_PMA_LASI_RX_PMALFLT 0x0010 /* PMA/PMD RX local fault */ +#define MDIO_PMA_LASI_RX_OPTICPOWERFLT 0x0020 /* RX optical power fault */ +#define MDIO_PMA_LASI_RX_WISLFLT 0x0200 /* WIS local fault */ + +/* LASI TX_ALARM control/status registers. */ +#define MDIO_PMA_LASI_TX_PHYXSLFLT 0x0001 /* PHY XS TX local fault */ +#define MDIO_PMA_LASI_TX_PCSLFLT 0x0008 /* PCS TX local fault */ +#define MDIO_PMA_LASI_TX_PMALFLT 0x0010 /* PMA/PMD TX local fault */ +#define MDIO_PMA_LASI_TX_LASERPOWERFLT 0x0080 /* Laser output power fault */ +#define MDIO_PMA_LASI_TX_LASERTEMPFLT 0x0100 /* Laser temperature fault */ +#define MDIO_PMA_LASI_TX_LASERBICURRFLT 0x0200 /* Laser bias current fault */ + +/* LASI control/status registers. */ +#define MDIO_PMA_LASI_LSALARM 0x0001 /* LS_ALARM enable/status */ +#define MDIO_PMA_LASI_TXALARM 0x0002 /* TX_ALARM enable/status */ +#define MDIO_PMA_LASI_RXALARM 0x0004 /* RX_ALARM enable/status */ + +/* Mapping between MDIO PRTAD/DEVAD and mii_ioctl_data::phy_id */ + +#define MDIO_PHY_ID_C45 0x8000 +#define MDIO_PHY_ID_PRTAD 0x03e0 +#define MDIO_PHY_ID_DEVAD 0x001f +#define MDIO_PHY_ID_C45_MASK \ + (MDIO_PHY_ID_C45 | MDIO_PHY_ID_PRTAD | MDIO_PHY_ID_DEVAD) + +static inline __u16 mdio_phy_id_c45(int prtad, int devad) +{ + return MDIO_PHY_ID_C45 | (prtad << 5) | devad; +} + +#endif /* _UAPI__LINUX_MDIO_H__ */ diff --git a/include/linux/media.h b/include/uapi/linux/media.h index 0ef883327de..0ef883327de 100644 --- a/include/linux/media.h +++ b/include/uapi/linux/media.h diff --git a/include/linux/mei.h b/include/uapi/linux/mei.h index bc0d8b69c49..bc0d8b69c49 100644 --- a/include/linux/mei.h +++ b/include/uapi/linux/mei.h diff --git a/include/uapi/linux/mempolicy.h b/include/uapi/linux/mempolicy.h new file mode 100644 index 00000000000..23e62e0537e --- /dev/null +++ b/include/uapi/linux/mempolicy.h @@ -0,0 +1,64 @@ +/* + * NUMA memory policies for Linux. + * Copyright 2003,2004 Andi Kleen SuSE Labs + */ +#ifndef _UAPI_LINUX_MEMPOLICY_H +#define _UAPI_LINUX_MEMPOLICY_H + +#include <linux/errno.h> + + +/* + * Both the MPOL_* mempolicy mode and the MPOL_F_* optional mode flags are + * passed by the user to either set_mempolicy() or mbind() in an 'int' actual. + * The MPOL_MODE_FLAGS macro determines the legal set of optional mode flags. + */ + +/* Policies */ +enum { + MPOL_DEFAULT, + MPOL_PREFERRED, + MPOL_BIND, + MPOL_INTERLEAVE, + MPOL_MAX, /* always last member of enum */ +}; + +enum mpol_rebind_step { + MPOL_REBIND_ONCE, /* do rebind work at once(not by two step) */ + MPOL_REBIND_STEP1, /* first step(set all the newly nodes) */ + MPOL_REBIND_STEP2, /* second step(clean all the disallowed nodes)*/ + MPOL_REBIND_NSTEP, +}; + +/* Flags for set_mempolicy */ +#define MPOL_F_STATIC_NODES (1 << 15) +#define MPOL_F_RELATIVE_NODES (1 << 14) + +/* + * MPOL_MODE_FLAGS is the union of all possible optional mode flags passed to + * either set_mempolicy() or mbind(). + */ +#define MPOL_MODE_FLAGS (MPOL_F_STATIC_NODES | MPOL_F_RELATIVE_NODES) + +/* Flags for get_mempolicy */ +#define MPOL_F_NODE (1<<0) /* return next IL mode instead of node mask */ +#define MPOL_F_ADDR (1<<1) /* look up vma using address */ +#define MPOL_F_MEMS_ALLOWED (1<<2) /* return allowed memories */ + +/* Flags for mbind */ +#define MPOL_MF_STRICT (1<<0) /* Verify existing pages in the mapping */ +#define MPOL_MF_MOVE (1<<1) /* Move pages owned by this process to conform to mapping */ +#define MPOL_MF_MOVE_ALL (1<<2) /* Move every page to conform to mapping */ +#define MPOL_MF_INTERNAL (1<<3) /* Internal flags start here */ + +/* + * Internal flags that share the struct mempolicy flags word with + * "mode flags". These flags are allocated from bit 0 up, as they + * are never OR'ed into the mode in mempolicy API arguments. + */ +#define MPOL_F_SHARED (1 << 0) /* identify shared policies */ +#define MPOL_F_LOCAL (1 << 1) /* preferred local allocation */ +#define MPOL_F_REBINDING (1 << 2) /* identify policies in rebinding */ + + +#endif /* _UAPI_LINUX_MEMPOLICY_H */ diff --git a/include/linux/meye.h b/include/uapi/linux/meye.h index 0dd49954f74..0dd49954f74 100644 --- a/include/linux/meye.h +++ b/include/uapi/linux/meye.h diff --git a/include/uapi/linux/mii.h b/include/uapi/linux/mii.h new file mode 100644 index 00000000000..237fac4bc17 --- /dev/null +++ b/include/uapi/linux/mii.h @@ -0,0 +1,161 @@ +/* + * linux/mii.h: definitions for MII-compatible transceivers + * Originally drivers/net/sunhme.h. + * + * Copyright (C) 1996, 1999, 2001 David S. Miller (davem@redhat.com) + */ + +#ifndef _UAPI__LINUX_MII_H__ +#define _UAPI__LINUX_MII_H__ + +#include <linux/types.h> +#include <linux/ethtool.h> + +/* Generic MII registers. */ +#define MII_BMCR 0x00 /* Basic mode control register */ +#define MII_BMSR 0x01 /* Basic mode status register */ +#define MII_PHYSID1 0x02 /* PHYS ID 1 */ +#define MII_PHYSID2 0x03 /* PHYS ID 2 */ +#define MII_ADVERTISE 0x04 /* Advertisement control reg */ +#define MII_LPA 0x05 /* Link partner ability reg */ +#define MII_EXPANSION 0x06 /* Expansion register */ +#define MII_CTRL1000 0x09 /* 1000BASE-T control */ +#define MII_STAT1000 0x0a /* 1000BASE-T status */ +#define MII_MMD_CTRL 0x0d /* MMD Access Control Register */ +#define MII_MMD_DATA 0x0e /* MMD Access Data Register */ +#define MII_ESTATUS 0x0f /* Extended Status */ +#define MII_DCOUNTER 0x12 /* Disconnect counter */ +#define MII_FCSCOUNTER 0x13 /* False carrier counter */ +#define MII_NWAYTEST 0x14 /* N-way auto-neg test reg */ +#define MII_RERRCOUNTER 0x15 /* Receive error counter */ +#define MII_SREVISION 0x16 /* Silicon revision */ +#define MII_RESV1 0x17 /* Reserved... */ +#define MII_LBRERROR 0x18 /* Lpback, rx, bypass error */ +#define MII_PHYADDR 0x19 /* PHY address */ +#define MII_RESV2 0x1a /* Reserved... */ +#define MII_TPISTATUS 0x1b /* TPI status for 10mbps */ +#define MII_NCONFIG 0x1c /* Network interface config */ + +/* Basic mode control register. */ +#define BMCR_RESV 0x003f /* Unused... */ +#define BMCR_SPEED1000 0x0040 /* MSB of Speed (1000) */ +#define BMCR_CTST 0x0080 /* Collision test */ +#define BMCR_FULLDPLX 0x0100 /* Full duplex */ +#define BMCR_ANRESTART 0x0200 /* Auto negotiation restart */ +#define BMCR_ISOLATE 0x0400 /* Isolate data paths from MII */ +#define BMCR_PDOWN 0x0800 /* Enable low power state */ +#define BMCR_ANENABLE 0x1000 /* Enable auto negotiation */ +#define BMCR_SPEED100 0x2000 /* Select 100Mbps */ +#define BMCR_LOOPBACK 0x4000 /* TXD loopback bits */ +#define BMCR_RESET 0x8000 /* Reset to default state */ + +/* Basic mode status register. */ +#define BMSR_ERCAP 0x0001 /* Ext-reg capability */ +#define BMSR_JCD 0x0002 /* Jabber detected */ +#define BMSR_LSTATUS 0x0004 /* Link status */ +#define BMSR_ANEGCAPABLE 0x0008 /* Able to do auto-negotiation */ +#define BMSR_RFAULT 0x0010 /* Remote fault detected */ +#define BMSR_ANEGCOMPLETE 0x0020 /* Auto-negotiation complete */ +#define BMSR_RESV 0x00c0 /* Unused... */ +#define BMSR_ESTATEN 0x0100 /* Extended Status in R15 */ +#define BMSR_100HALF2 0x0200 /* Can do 100BASE-T2 HDX */ +#define BMSR_100FULL2 0x0400 /* Can do 100BASE-T2 FDX */ +#define BMSR_10HALF 0x0800 /* Can do 10mbps, half-duplex */ +#define BMSR_10FULL 0x1000 /* Can do 10mbps, full-duplex */ +#define BMSR_100HALF 0x2000 /* Can do 100mbps, half-duplex */ +#define BMSR_100FULL 0x4000 /* Can do 100mbps, full-duplex */ +#define BMSR_100BASE4 0x8000 /* Can do 100mbps, 4k packets */ + +/* Advertisement control register. */ +#define ADVERTISE_SLCT 0x001f /* Selector bits */ +#define ADVERTISE_CSMA 0x0001 /* Only selector supported */ +#define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */ +#define ADVERTISE_1000XFULL 0x0020 /* Try for 1000BASE-X full-duplex */ +#define ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */ +#define ADVERTISE_1000XHALF 0x0040 /* Try for 1000BASE-X half-duplex */ +#define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */ +#define ADVERTISE_1000XPAUSE 0x0080 /* Try for 1000BASE-X pause */ +#define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */ +#define ADVERTISE_1000XPSE_ASYM 0x0100 /* Try for 1000BASE-X asym pause */ +#define ADVERTISE_100BASE4 0x0200 /* Try for 100mbps 4k packets */ +#define ADVERTISE_PAUSE_CAP 0x0400 /* Try for pause */ +#define ADVERTISE_PAUSE_ASYM 0x0800 /* Try for asymetric pause */ +#define ADVERTISE_RESV 0x1000 /* Unused... */ +#define ADVERTISE_RFAULT 0x2000 /* Say we can detect faults */ +#define ADVERTISE_LPACK 0x4000 /* Ack link partners response */ +#define ADVERTISE_NPAGE 0x8000 /* Next page bit */ + +#define ADVERTISE_FULL (ADVERTISE_100FULL | ADVERTISE_10FULL | \ + ADVERTISE_CSMA) +#define ADVERTISE_ALL (ADVERTISE_10HALF | ADVERTISE_10FULL | \ + ADVERTISE_100HALF | ADVERTISE_100FULL) + +/* Link partner ability register. */ +#define LPA_SLCT 0x001f /* Same as advertise selector */ +#define LPA_10HALF 0x0020 /* Can do 10mbps half-duplex */ +#define LPA_1000XFULL 0x0020 /* Can do 1000BASE-X full-duplex */ +#define LPA_10FULL 0x0040 /* Can do 10mbps full-duplex */ +#define LPA_1000XHALF 0x0040 /* Can do 1000BASE-X half-duplex */ +#define LPA_100HALF 0x0080 /* Can do 100mbps half-duplex */ +#define LPA_1000XPAUSE 0x0080 /* Can do 1000BASE-X pause */ +#define LPA_100FULL 0x0100 /* Can do 100mbps full-duplex */ +#define LPA_1000XPAUSE_ASYM 0x0100 /* Can do 1000BASE-X pause asym*/ +#define LPA_100BASE4 0x0200 /* Can do 100mbps 4k packets */ +#define LPA_PAUSE_CAP 0x0400 /* Can pause */ +#define LPA_PAUSE_ASYM 0x0800 /* Can pause asymetrically */ +#define LPA_RESV 0x1000 /* Unused... */ +#define LPA_RFAULT 0x2000 /* Link partner faulted */ +#define LPA_LPACK 0x4000 /* Link partner acked us */ +#define LPA_NPAGE 0x8000 /* Next page bit */ + +#define LPA_DUPLEX (LPA_10FULL | LPA_100FULL) +#define LPA_100 (LPA_100FULL | LPA_100HALF | LPA_100BASE4) + +/* Expansion register for auto-negotiation. */ +#define EXPANSION_NWAY 0x0001 /* Can do N-way auto-nego */ +#define EXPANSION_LCWP 0x0002 /* Got new RX page code word */ +#define EXPANSION_ENABLENPAGE 0x0004 /* This enables npage words */ +#define EXPANSION_NPCAPABLE 0x0008 /* Link partner supports npage */ +#define EXPANSION_MFAULTS 0x0010 /* Multiple faults detected */ +#define EXPANSION_RESV 0xffe0 /* Unused... */ + +#define ESTATUS_1000_TFULL 0x2000 /* Can do 1000BT Full */ +#define ESTATUS_1000_THALF 0x1000 /* Can do 1000BT Half */ + +/* N-way test register. */ +#define NWAYTEST_RESV1 0x00ff /* Unused... */ +#define NWAYTEST_LOOPBACK 0x0100 /* Enable loopback for N-way */ +#define NWAYTEST_RESV2 0xfe00 /* Unused... */ + +/* 1000BASE-T Control register */ +#define ADVERTISE_1000FULL 0x0200 /* Advertise 1000BASE-T full duplex */ +#define ADVERTISE_1000HALF 0x0100 /* Advertise 1000BASE-T half duplex */ +#define CTL1000_AS_MASTER 0x0800 +#define CTL1000_ENABLE_MASTER 0x1000 + +/* 1000BASE-T Status register */ +#define LPA_1000LOCALRXOK 0x2000 /* Link partner local receiver status */ +#define LPA_1000REMRXOK 0x1000 /* Link partner remote receiver status */ +#define LPA_1000FULL 0x0800 /* Link partner 1000BASE-T full duplex */ +#define LPA_1000HALF 0x0400 /* Link partner 1000BASE-T half duplex */ + +/* Flow control flags */ +#define FLOW_CTRL_TX 0x01 +#define FLOW_CTRL_RX 0x02 + +/* MMD Access Control register fields */ +#define MII_MMD_CTRL_DEVAD_MASK 0x1f /* Mask MMD DEVAD*/ +#define MII_MMD_CTRL_ADDR 0x0000 /* Address */ +#define MII_MMD_CTRL_NOINCR 0x4000 /* no post increment */ +#define MII_MMD_CTRL_INCR_RDWT 0x8000 /* post increment on reads & writes */ +#define MII_MMD_CTRL_INCR_ON_WT 0xC000 /* post increment on writes only */ + +/* This structure is used in all SIOCxMIIxxx ioctl calls */ +struct mii_ioctl_data { + __u16 phy_id; + __u16 reg_num; + __u16 val_in; + __u16 val_out; +}; + +#endif /* _UAPI__LINUX_MII_H__ */ diff --git a/include/linux/minix_fs.h b/include/uapi/linux/minix_fs.h index 13fe09e0576..13fe09e0576 100644 --- a/include/linux/minix_fs.h +++ b/include/uapi/linux/minix_fs.h diff --git a/include/uapi/linux/mman.h b/include/uapi/linux/mman.h new file mode 100644 index 00000000000..ade4acd3a90 --- /dev/null +++ b/include/uapi/linux/mman.h @@ -0,0 +1,13 @@ +#ifndef _UAPI_LINUX_MMAN_H +#define _UAPI_LINUX_MMAN_H + +#include <asm/mman.h> + +#define MREMAP_MAYMOVE 1 +#define MREMAP_FIXED 2 + +#define OVERCOMMIT_GUESS 0 +#define OVERCOMMIT_ALWAYS 1 +#define OVERCOMMIT_NEVER 2 + +#endif /* _UAPI_LINUX_MMAN_H */ diff --git a/include/uapi/linux/mmc/Kbuild b/include/uapi/linux/mmc/Kbuild index aafaa5aa54d..8c1d2cb75e3 100644 --- a/include/uapi/linux/mmc/Kbuild +++ b/include/uapi/linux/mmc/Kbuild @@ -1 +1,2 @@ # UAPI Header export list +header-y += ioctl.h diff --git a/include/linux/mmc/ioctl.h b/include/uapi/linux/mmc/ioctl.h index 1f5e6892392..1f5e6892392 100644 --- a/include/linux/mmc/ioctl.h +++ b/include/uapi/linux/mmc/ioctl.h diff --git a/include/linux/mmtimer.h b/include/uapi/linux/mmtimer.h index 884cabf1608..884cabf1608 100644 --- a/include/linux/mmtimer.h +++ b/include/uapi/linux/mmtimer.h diff --git a/include/linux/mqueue.h b/include/uapi/linux/mqueue.h index 8b5a79615fb..8b5a79615fb 100644 --- a/include/linux/mqueue.h +++ b/include/uapi/linux/mqueue.h diff --git a/include/uapi/linux/mroute.h b/include/uapi/linux/mroute.h new file mode 100644 index 00000000000..16929993acc --- /dev/null +++ b/include/uapi/linux/mroute.h @@ -0,0 +1,143 @@ +#ifndef _UAPI__LINUX_MROUTE_H +#define _UAPI__LINUX_MROUTE_H + +#include <linux/sockios.h> +#include <linux/types.h> + +/* + * Based on the MROUTING 3.5 defines primarily to keep + * source compatibility with BSD. + * + * See the mrouted code for the original history. + * + * Protocol Independent Multicast (PIM) data structures included + * Carlos Picoto (cap@di.fc.ul.pt) + * + */ + +#define MRT_BASE 200 +#define MRT_INIT (MRT_BASE) /* Activate the kernel mroute code */ +#define MRT_DONE (MRT_BASE+1) /* Shutdown the kernel mroute */ +#define MRT_ADD_VIF (MRT_BASE+2) /* Add a virtual interface */ +#define MRT_DEL_VIF (MRT_BASE+3) /* Delete a virtual interface */ +#define MRT_ADD_MFC (MRT_BASE+4) /* Add a multicast forwarding entry */ +#define MRT_DEL_MFC (MRT_BASE+5) /* Delete a multicast forwarding entry */ +#define MRT_VERSION (MRT_BASE+6) /* Get the kernel multicast version */ +#define MRT_ASSERT (MRT_BASE+7) /* Activate PIM assert mode */ +#define MRT_PIM (MRT_BASE+8) /* enable PIM code */ +#define MRT_TABLE (MRT_BASE+9) /* Specify mroute table ID */ + +#define SIOCGETVIFCNT SIOCPROTOPRIVATE /* IP protocol privates */ +#define SIOCGETSGCNT (SIOCPROTOPRIVATE+1) +#define SIOCGETRPF (SIOCPROTOPRIVATE+2) + +#define MAXVIFS 32 +typedef unsigned long vifbitmap_t; /* User mode code depends on this lot */ +typedef unsigned short vifi_t; +#define ALL_VIFS ((vifi_t)(-1)) + +/* + * Same idea as select + */ + +#define VIFM_SET(n,m) ((m)|=(1<<(n))) +#define VIFM_CLR(n,m) ((m)&=~(1<<(n))) +#define VIFM_ISSET(n,m) ((m)&(1<<(n))) +#define VIFM_CLRALL(m) ((m)=0) +#define VIFM_COPY(mfrom,mto) ((mto)=(mfrom)) +#define VIFM_SAME(m1,m2) ((m1)==(m2)) + +/* + * Passed by mrouted for an MRT_ADD_VIF - again we use the + * mrouted 3.6 structures for compatibility + */ + +struct vifctl { + vifi_t vifc_vifi; /* Index of VIF */ + unsigned char vifc_flags; /* VIFF_ flags */ + unsigned char vifc_threshold; /* ttl limit */ + unsigned int vifc_rate_limit; /* Rate limiter values (NI) */ + union { + struct in_addr vifc_lcl_addr; /* Local interface address */ + int vifc_lcl_ifindex; /* Local interface index */ + }; + struct in_addr vifc_rmt_addr; /* IPIP tunnel addr */ +}; + +#define VIFF_TUNNEL 0x1 /* IPIP tunnel */ +#define VIFF_SRCRT 0x2 /* NI */ +#define VIFF_REGISTER 0x4 /* register vif */ +#define VIFF_USE_IFINDEX 0x8 /* use vifc_lcl_ifindex instead of + vifc_lcl_addr to find an interface */ + +/* + * Cache manipulation structures for mrouted and PIMd + */ + +struct mfcctl { + struct in_addr mfcc_origin; /* Origin of mcast */ + struct in_addr mfcc_mcastgrp; /* Group in question */ + vifi_t mfcc_parent; /* Where it arrived */ + unsigned char mfcc_ttls[MAXVIFS]; /* Where it is going */ + unsigned int mfcc_pkt_cnt; /* pkt count for src-grp */ + unsigned int mfcc_byte_cnt; + unsigned int mfcc_wrong_if; + int mfcc_expire; +}; + +/* + * Group count retrieval for mrouted + */ + +struct sioc_sg_req { + struct in_addr src; + struct in_addr grp; + unsigned long pktcnt; + unsigned long bytecnt; + unsigned long wrong_if; +}; + +/* + * To get vif packet counts + */ + +struct sioc_vif_req { + vifi_t vifi; /* Which iface */ + unsigned long icount; /* In packets */ + unsigned long ocount; /* Out packets */ + unsigned long ibytes; /* In bytes */ + unsigned long obytes; /* Out bytes */ +}; + +/* + * This is the format the mroute daemon expects to see IGMP control + * data. Magically happens to be like an IP packet as per the original + */ + +struct igmpmsg { + __u32 unused1,unused2; + unsigned char im_msgtype; /* What is this */ + unsigned char im_mbz; /* Must be zero */ + unsigned char im_vif; /* Interface (this ought to be a vifi_t!) */ + unsigned char unused3; + struct in_addr im_src,im_dst; +}; + +/* + * That's all usermode folks + */ + + + +#define MFC_ASSERT_THRESH (3*HZ) /* Maximal freq. of asserts */ + +/* + * Pseudo messages used by mrouted + */ + +#define IGMPMSG_NOCACHE 1 /* Kern cache fill request to mrouted */ +#define IGMPMSG_WRONGVIF 2 /* For PIM assert processing (unused) */ +#define IGMPMSG_WHOLEPKT 3 /* For PIM Register processing */ + + +#endif /* _UAPI__LINUX_MROUTE_H */ diff --git a/include/uapi/linux/mroute6.h b/include/uapi/linux/mroute6.h new file mode 100644 index 00000000000..3e89b5e7f9e --- /dev/null +++ b/include/uapi/linux/mroute6.h @@ -0,0 +1,137 @@ +#ifndef _UAPI__LINUX_MROUTE6_H +#define _UAPI__LINUX_MROUTE6_H + +#include <linux/types.h> +#include <linux/sockios.h> + +/* + * Based on the MROUTING 3.5 defines primarily to keep + * source compatibility with BSD. + * + * See the pim6sd code for the original history. + * + * Protocol Independent Multicast (PIM) data structures included + * Carlos Picoto (cap@di.fc.ul.pt) + * + */ + +#define MRT6_BASE 200 +#define MRT6_INIT (MRT6_BASE) /* Activate the kernel mroute code */ +#define MRT6_DONE (MRT6_BASE+1) /* Shutdown the kernel mroute */ +#define MRT6_ADD_MIF (MRT6_BASE+2) /* Add a virtual interface */ +#define MRT6_DEL_MIF (MRT6_BASE+3) /* Delete a virtual interface */ +#define MRT6_ADD_MFC (MRT6_BASE+4) /* Add a multicast forwarding entry */ +#define MRT6_DEL_MFC (MRT6_BASE+5) /* Delete a multicast forwarding entry */ +#define MRT6_VERSION (MRT6_BASE+6) /* Get the kernel multicast version */ +#define MRT6_ASSERT (MRT6_BASE+7) /* Activate PIM assert mode */ +#define MRT6_PIM (MRT6_BASE+8) /* enable PIM code */ +#define MRT6_TABLE (MRT6_BASE+9) /* Specify mroute table ID */ + +#define SIOCGETMIFCNT_IN6 SIOCPROTOPRIVATE /* IP protocol privates */ +#define SIOCGETSGCNT_IN6 (SIOCPROTOPRIVATE+1) +#define SIOCGETRPF (SIOCPROTOPRIVATE+2) + +#define MAXMIFS 32 +typedef unsigned long mifbitmap_t; /* User mode code depends on this lot */ +typedef unsigned short mifi_t; +#define ALL_MIFS ((mifi_t)(-1)) + +#ifndef IF_SETSIZE +#define IF_SETSIZE 256 +#endif + +typedef __u32 if_mask; +#define NIFBITS (sizeof(if_mask) * 8) /* bits per mask */ + +#if !defined(__KERNEL__) +#if !defined(DIV_ROUND_UP) +#define DIV_ROUND_UP(x,y) (((x) + ((y) - 1)) / (y)) +#endif +#endif + +typedef struct if_set { + if_mask ifs_bits[DIV_ROUND_UP(IF_SETSIZE, NIFBITS)]; +} if_set; + +#define IF_SET(n, p) ((p)->ifs_bits[(n)/NIFBITS] |= (1 << ((n) % NIFBITS))) +#define IF_CLR(n, p) ((p)->ifs_bits[(n)/NIFBITS] &= ~(1 << ((n) % NIFBITS))) +#define IF_ISSET(n, p) ((p)->ifs_bits[(n)/NIFBITS] & (1 << ((n) % NIFBITS))) +#define IF_COPY(f, t) bcopy(f, t, sizeof(*(f))) +#define IF_ZERO(p) bzero(p, sizeof(*(p))) + +/* + * Passed by mrouted for an MRT_ADD_MIF - again we use the + * mrouted 3.6 structures for compatibility + */ + +struct mif6ctl { + mifi_t mif6c_mifi; /* Index of MIF */ + unsigned char mif6c_flags; /* MIFF_ flags */ + unsigned char vifc_threshold; /* ttl limit */ + __u16 mif6c_pifi; /* the index of the physical IF */ + unsigned int vifc_rate_limit; /* Rate limiter values (NI) */ +}; + +#define MIFF_REGISTER 0x1 /* register vif */ + +/* + * Cache manipulation structures for mrouted and PIMd + */ + +struct mf6cctl { + struct sockaddr_in6 mf6cc_origin; /* Origin of mcast */ + struct sockaddr_in6 mf6cc_mcastgrp; /* Group in question */ + mifi_t mf6cc_parent; /* Where it arrived */ + struct if_set mf6cc_ifset; /* Where it is going */ +}; + +/* + * Group count retrieval for pim6sd + */ + +struct sioc_sg_req6 { + struct sockaddr_in6 src; + struct sockaddr_in6 grp; + unsigned long pktcnt; + unsigned long bytecnt; + unsigned long wrong_if; +}; + +/* + * To get vif packet counts + */ + +struct sioc_mif_req6 { + mifi_t mifi; /* Which iface */ + unsigned long icount; /* In packets */ + unsigned long ocount; /* Out packets */ + unsigned long ibytes; /* In bytes */ + unsigned long obytes; /* Out bytes */ +}; + +/* + * That's all usermode folks + */ + + + +/* + * Structure used to communicate from kernel to multicast router. + * We'll overlay the structure onto an MLD header (not an IPv6 heder like igmpmsg{} + * used for IPv4 implementation). This is because this structure will be passed via an + * IPv6 raw socket, on which an application will only receiver the payload i.e the data after + * the IPv6 header and all the extension headers. (See section 3 of RFC 3542) + */ + +struct mrt6msg { +#define MRT6MSG_NOCACHE 1 +#define MRT6MSG_WRONGMIF 2 +#define MRT6MSG_WHOLEPKT 3 /* used for use level encap */ + __u8 im6_mbz; /* must be zero */ + __u8 im6_msgtype; /* what type of message */ + __u16 im6_mif; /* mif rec'd on */ + __u32 im6_pad; /* padding for 64 bit arch */ + struct in6_addr im6_src, im6_dst; +}; + +#endif /* _UAPI__LINUX_MROUTE6_H */ diff --git a/include/uapi/linux/msdos_fs.h b/include/uapi/linux/msdos_fs.h new file mode 100644 index 00000000000..996719f82e2 --- /dev/null +++ b/include/uapi/linux/msdos_fs.h @@ -0,0 +1,167 @@ +#ifndef _UAPI_LINUX_MSDOS_FS_H +#define _UAPI_LINUX_MSDOS_FS_H + +#include <linux/types.h> +#include <linux/magic.h> +#include <asm/byteorder.h> + +/* + * The MS-DOS filesystem constants/structures + */ + +#define SECTOR_SIZE 512 /* sector size (bytes) */ +#define SECTOR_BITS 9 /* log2(SECTOR_SIZE) */ +#define MSDOS_DPB (MSDOS_DPS) /* dir entries per block */ +#define MSDOS_DPB_BITS 4 /* log2(MSDOS_DPB) */ +#define MSDOS_DPS (SECTOR_SIZE / sizeof(struct msdos_dir_entry)) +#define MSDOS_DPS_BITS 4 /* log2(MSDOS_DPS) */ +#define MSDOS_LONGNAME 256 /* maximum name length */ +#define CF_LE_W(v) le16_to_cpu(v) +#define CF_LE_L(v) le32_to_cpu(v) +#define CT_LE_W(v) cpu_to_le16(v) +#define CT_LE_L(v) cpu_to_le32(v) + +#define MSDOS_ROOT_INO 1 /* The root inode number */ +#define MSDOS_FSINFO_INO 2 /* Used for managing the FSINFO block */ + +#define MSDOS_DIR_BITS 5 /* log2(sizeof(struct msdos_dir_entry)) */ + +/* directory limit */ +#define FAT_MAX_DIR_ENTRIES (65536) +#define FAT_MAX_DIR_SIZE (FAT_MAX_DIR_ENTRIES << MSDOS_DIR_BITS) + +#define ATTR_NONE 0 /* no attribute bits */ +#define ATTR_RO 1 /* read-only */ +#define ATTR_HIDDEN 2 /* hidden */ +#define ATTR_SYS 4 /* system */ +#define ATTR_VOLUME 8 /* volume label */ +#define ATTR_DIR 16 /* directory */ +#define ATTR_ARCH 32 /* archived */ + +/* attribute bits that are copied "as is" */ +#define ATTR_UNUSED (ATTR_VOLUME | ATTR_ARCH | ATTR_SYS | ATTR_HIDDEN) +/* bits that are used by the Windows 95/Windows NT extended FAT */ +#define ATTR_EXT (ATTR_RO | ATTR_HIDDEN | ATTR_SYS | ATTR_VOLUME) + +#define CASE_LOWER_BASE 8 /* base is lower case */ +#define CASE_LOWER_EXT 16 /* extension is lower case */ + +#define DELETED_FLAG 0xe5 /* marks file as deleted when in name[0] */ +#define IS_FREE(n) (!*(n) || *(n) == DELETED_FLAG) + +#define FAT_LFN_LEN 255 /* maximum long name length */ +#define MSDOS_NAME 11 /* maximum name length */ +#define MSDOS_SLOTS 21 /* max # of slots for short and long names */ +#define MSDOS_DOT ". " /* ".", padded to MSDOS_NAME chars */ +#define MSDOS_DOTDOT ".. " /* "..", padded to MSDOS_NAME chars */ + +#define FAT_FIRST_ENT(s, x) ((MSDOS_SB(s)->fat_bits == 32 ? 0x0FFFFF00 : \ + MSDOS_SB(s)->fat_bits == 16 ? 0xFF00 : 0xF00) | (x)) + +/* start of data cluster's entry (number of reserved clusters) */ +#define FAT_START_ENT 2 + +/* maximum number of clusters */ +#define MAX_FAT12 0xFF4 +#define MAX_FAT16 0xFFF4 +#define MAX_FAT32 0x0FFFFFF6 +#define MAX_FAT(s) (MSDOS_SB(s)->fat_bits == 32 ? MAX_FAT32 : \ + MSDOS_SB(s)->fat_bits == 16 ? MAX_FAT16 : MAX_FAT12) + +/* bad cluster mark */ +#define BAD_FAT12 0xFF7 +#define BAD_FAT16 0xFFF7 +#define BAD_FAT32 0x0FFFFFF7 + +/* standard EOF */ +#define EOF_FAT12 0xFFF +#define EOF_FAT16 0xFFFF +#define EOF_FAT32 0x0FFFFFFF + +#define FAT_ENT_FREE (0) +#define FAT_ENT_BAD (BAD_FAT32) +#define FAT_ENT_EOF (EOF_FAT32) + +#define FAT_FSINFO_SIG1 0x41615252 +#define FAT_FSINFO_SIG2 0x61417272 +#define IS_FSINFO(x) (le32_to_cpu((x)->signature1) == FAT_FSINFO_SIG1 \ + && le32_to_cpu((x)->signature2) == FAT_FSINFO_SIG2) + +struct __fat_dirent { + long d_ino; + __kernel_off_t d_off; + unsigned short d_reclen; + char d_name[256]; /* We must not include limits.h! */ +}; + +/* + * ioctl commands + */ +#define VFAT_IOCTL_READDIR_BOTH _IOR('r', 1, struct __fat_dirent[2]) +#define VFAT_IOCTL_READDIR_SHORT _IOR('r', 2, struct __fat_dirent[2]) +/* <linux/videotext.h> has used 0x72 ('r') in collision, so skip a few */ +#define FAT_IOCTL_GET_ATTRIBUTES _IOR('r', 0x10, __u32) +#define FAT_IOCTL_SET_ATTRIBUTES _IOW('r', 0x11, __u32) + +struct fat_boot_sector { + __u8 ignored[3]; /* Boot strap short or near jump */ + __u8 system_id[8]; /* Name - can be used to special case + partition manager volumes */ + __u8 sector_size[2]; /* bytes per logical sector */ + __u8 sec_per_clus; /* sectors/cluster */ + __le16 reserved; /* reserved sectors */ + __u8 fats; /* number of FATs */ + __u8 dir_entries[2]; /* root directory entries */ + __u8 sectors[2]; /* number of sectors */ + __u8 media; /* media code */ + __le16 fat_length; /* sectors/FAT */ + __le16 secs_track; /* sectors per track */ + __le16 heads; /* number of heads */ + __le32 hidden; /* hidden sectors (unused) */ + __le32 total_sect; /* number of sectors (if sectors == 0) */ + + /* The following fields are only used by FAT32 */ + __le32 fat32_length; /* sectors/FAT */ + __le16 flags; /* bit 8: fat mirroring, low 4: active fat */ + __u8 version[2]; /* major, minor filesystem version */ + __le32 root_cluster; /* first cluster in root directory */ + __le16 info_sector; /* filesystem info sector */ + __le16 backup_boot; /* backup boot sector */ + __le16 reserved2[6]; /* Unused */ +}; + +struct fat_boot_fsinfo { + __le32 signature1; /* 0x41615252L */ + __le32 reserved1[120]; /* Nothing as far as I can tell */ + __le32 signature2; /* 0x61417272L */ + __le32 free_clusters; /* Free cluster count. -1 if unknown */ + __le32 next_cluster; /* Most recently allocated cluster */ + __le32 reserved2[4]; +}; + +struct msdos_dir_entry { + __u8 name[MSDOS_NAME];/* name and extension */ + __u8 attr; /* attribute bits */ + __u8 lcase; /* Case for base and extension */ + __u8 ctime_cs; /* Creation time, centiseconds (0-199) */ + __le16 ctime; /* Creation time */ + __le16 cdate; /* Creation date */ + __le16 adate; /* Last access date */ + __le16 starthi; /* High 16 bits of cluster in FAT32 */ + __le16 time,date,start;/* time, date and first cluster */ + __le32 size; /* file size (in bytes) */ +}; + +/* Up to 13 characters of the name */ +struct msdos_dir_slot { + __u8 id; /* sequence number for slot */ + __u8 name0_4[10]; /* first 5 characters in name */ + __u8 attr; /* attribute byte */ + __u8 reserved; /* always 0 */ + __u8 alias_checksum; /* checksum for 8.3 alias */ + __u8 name5_10[12]; /* 6 more characters in name */ + __le16 start; /* starting cluster number, 0 in long slots */ + __u8 name11_12[4]; /* last 2 characters in name */ +}; + +#endif /* _UAPI_LINUX_MSDOS_FS_H */ diff --git a/include/uapi/linux/msg.h b/include/uapi/linux/msg.h new file mode 100644 index 00000000000..78dbd2f996a --- /dev/null +++ b/include/uapi/linux/msg.h @@ -0,0 +1,75 @@ +#ifndef _UAPI_LINUX_MSG_H +#define _UAPI_LINUX_MSG_H + +#include <linux/ipc.h> + +/* ipcs ctl commands */ +#define MSG_STAT 11 +#define MSG_INFO 12 + +/* msgrcv options */ +#define MSG_NOERROR 010000 /* no error if message is too big */ +#define MSG_EXCEPT 020000 /* recv any msg except of specified type.*/ + +/* Obsolete, used only for backwards compatibility and libc5 compiles */ +struct msqid_ds { + struct ipc_perm msg_perm; + struct msg *msg_first; /* first message on queue,unused */ + struct msg *msg_last; /* last message in queue,unused */ + __kernel_time_t msg_stime; /* last msgsnd time */ + __kernel_time_t msg_rtime; /* last msgrcv time */ + __kernel_time_t msg_ctime; /* last change time */ + unsigned long msg_lcbytes; /* Reuse junk fields for 32 bit */ + unsigned long msg_lqbytes; /* ditto */ + unsigned short msg_cbytes; /* current number of bytes on queue */ + unsigned short msg_qnum; /* number of messages in queue */ + unsigned short msg_qbytes; /* max number of bytes on queue */ + __kernel_ipc_pid_t msg_lspid; /* pid of last msgsnd */ + __kernel_ipc_pid_t msg_lrpid; /* last receive pid */ +}; + +/* Include the definition of msqid64_ds */ +#include <asm/msgbuf.h> + +/* message buffer for msgsnd and msgrcv calls */ +struct msgbuf { + long mtype; /* type of message */ + char mtext[1]; /* message text */ +}; + +/* buffer for msgctl calls IPC_INFO, MSG_INFO */ +struct msginfo { + int msgpool; + int msgmap; + int msgmax; + int msgmnb; + int msgmni; + int msgssz; + int msgtql; + unsigned short msgseg; +}; + +/* + * Scaling factor to compute msgmni: + * the memory dedicated to msg queues (msgmni * msgmnb) should occupy + * at most 1/MSG_MEM_SCALE of the lowmem (see the formula in ipc/msg.c): + * up to 8MB : msgmni = 16 (MSGMNI) + * 4 GB : msgmni = 8K + * more than 16 GB : msgmni = 32K (IPCMNI) + */ +#define MSG_MEM_SCALE 32 + +#define MSGMNI 16 /* <= IPCMNI */ /* max # of msg queue identifiers */ +#define MSGMAX 8192 /* <= INT_MAX */ /* max size of message (bytes) */ +#define MSGMNB 16384 /* <= INT_MAX */ /* default max size of a message queue */ + +/* unused */ +#define MSGPOOL (MSGMNI * MSGMNB / 1024) /* size in kbytes of message pool */ +#define MSGTQL MSGMNB /* number of system message headers */ +#define MSGMAP MSGMNB /* number of entries in message map */ +#define MSGSSZ 16 /* message segment size */ +#define __MSGSEG ((MSGPOOL * 1024) / MSGSSZ) /* max no. of segments */ +#define MSGSEG (__MSGSEG <= 0xffff ? __MSGSEG : 0xffff) + + +#endif /* _UAPI_LINUX_MSG_H */ diff --git a/include/linux/mtio.h b/include/uapi/linux/mtio.h index 18543e2db06..18543e2db06 100644 --- a/include/linux/mtio.h +++ b/include/uapi/linux/mtio.h diff --git a/include/uapi/linux/n_r3964.h b/include/uapi/linux/n_r3964.h new file mode 100644 index 00000000000..81337cbf40b --- /dev/null +++ b/include/uapi/linux/n_r3964.h @@ -0,0 +1,98 @@ +/* r3964 linediscipline for linux + * + * ----------------------------------------------------------- + * Copyright by + * Philips Automation Projects + * Kassel (Germany) + * ----------------------------------------------------------- + * This software may be used and distributed according to the terms of + * the GNU General Public License, incorporated herein by reference. + * + * Author: + * L. Haag + * + * $Log: r3964.h,v $ + * Revision 1.4 2005/12/21 19:54:24 Kurt Huwig <kurt huwig de> + * Fixed HZ usage on 2.6 kernels + * Removed unnecessary include + * + * Revision 1.3 2001/03/18 13:02:24 dwmw2 + * Fix timer usage, use spinlocks properly. + * + * Revision 1.2 2001/03/18 12:53:15 dwmw2 + * Merge changes in 2.4.2 + * + * Revision 1.1.1.1 1998/10/13 16:43:14 dwmw2 + * This'll screw the version control + * + * Revision 1.6 1998/09/30 00:40:38 dwmw2 + * Updated to use kernel's N_R3964 if available + * + * Revision 1.4 1998/04/02 20:29:44 lhaag + * select, blocking, ... + * + * Revision 1.3 1998/02/12 18:58:43 root + * fixed some memory leaks + * calculation of checksum characters + * + * Revision 1.2 1998/02/07 13:03:17 root + * ioctl read_telegram + * + * Revision 1.1 1998/02/06 19:19:43 root + * Initial revision + * + * + */ + +#ifndef _UAPI__LINUX_N_R3964_H__ +#define _UAPI__LINUX_N_R3964_H__ + +/* line disciplines for r3964 protocol */ + + +/* + * Ioctl-commands + */ + +#define R3964_ENABLE_SIGNALS 0x5301 +#define R3964_SETPRIORITY 0x5302 +#define R3964_USE_BCC 0x5303 +#define R3964_READ_TELEGRAM 0x5304 + +/* Options for R3964_SETPRIORITY */ +#define R3964_MASTER 0 +#define R3964_SLAVE 1 + +/* Options for R3964_ENABLE_SIGNALS */ +#define R3964_SIG_ACK 0x0001 +#define R3964_SIG_DATA 0x0002 +#define R3964_SIG_ALL 0x000f +#define R3964_SIG_NONE 0x0000 +#define R3964_USE_SIGIO 0x1000 + +/* + * r3964 operation states: + */ + +/* types for msg_id: */ +enum {R3964_MSG_ACK=1, R3964_MSG_DATA }; + +#define R3964_MAX_MSG_COUNT 32 + +/* error codes for client messages */ +#define R3964_OK 0 /* no error. */ +#define R3964_TX_FAIL -1 /* transmission error, block NOT sent */ +#define R3964_OVERFLOW -2 /* msg queue overflow */ + +/* the client gets this struct when calling read(fd,...): */ +struct r3964_client_message { + int msg_id; + int arg; + int error_code; +}; + +#define R3964_MTU 256 + + + +#endif /* _UAPI__LINUX_N_R3964_H__ */ diff --git a/include/uapi/linux/nbd.h b/include/uapi/linux/nbd.h new file mode 100644 index 00000000000..dfb514472cb --- /dev/null +++ b/include/uapi/linux/nbd.h @@ -0,0 +1,77 @@ +/* + * 1999 Copyright (C) Pavel Machek, pavel@ucw.cz. This code is GPL. + * 1999/11/04 Copyright (C) 1999 VMware, Inc. (Regis "HPReg" Duchesne) + * Made nbd_end_request() use the io_request_lock + * 2001 Copyright (C) Steven Whitehouse + * New nbd_end_request() for compatibility with new linux block + * layer code. + * 2003/06/24 Louis D. Langholtz <ldl@aros.net> + * Removed unneeded blksize_bits field from nbd_device struct. + * Cleanup PARANOIA usage & code. + * 2004/02/19 Paul Clements + * Removed PARANOIA, plus various cleanup and comments + */ + +#ifndef _UAPILINUX_NBD_H +#define _UAPILINUX_NBD_H + +#include <linux/types.h> + +#define NBD_SET_SOCK _IO( 0xab, 0 ) +#define NBD_SET_BLKSIZE _IO( 0xab, 1 ) +#define NBD_SET_SIZE _IO( 0xab, 2 ) +#define NBD_DO_IT _IO( 0xab, 3 ) +#define NBD_CLEAR_SOCK _IO( 0xab, 4 ) +#define NBD_CLEAR_QUE _IO( 0xab, 5 ) +#define NBD_PRINT_DEBUG _IO( 0xab, 6 ) +#define NBD_SET_SIZE_BLOCKS _IO( 0xab, 7 ) +#define NBD_DISCONNECT _IO( 0xab, 8 ) +#define NBD_SET_TIMEOUT _IO( 0xab, 9 ) +#define NBD_SET_FLAGS _IO( 0xab, 10) + +enum { + NBD_CMD_READ = 0, + NBD_CMD_WRITE = 1, + NBD_CMD_DISC = 2, + /* there is a gap here to match userspace */ + NBD_CMD_TRIM = 4 +}; + +/* values for flags field */ +#define NBD_FLAG_HAS_FLAGS (1 << 0) /* nbd-server supports flags */ +#define NBD_FLAG_READ_ONLY (1 << 1) /* device is read-only */ +/* there is a gap here to match userspace */ +#define NBD_FLAG_SEND_TRIM (1 << 5) /* send trim/discard */ + +#define nbd_cmd(req) ((req)->cmd[0]) + +/* userspace doesn't need the nbd_device structure */ + +/* These are sent over the network in the request/reply magic fields */ + +#define NBD_REQUEST_MAGIC 0x25609513 +#define NBD_REPLY_MAGIC 0x67446698 +/* Do *not* use magics: 0x12560953 0x96744668. */ + +/* + * This is the packet used for communication between client and + * server. All data are in network byte order. + */ +struct nbd_request { + __be32 magic; + __be32 type; /* == READ || == WRITE */ + char handle[8]; + __be64 from; + __be32 len; +} __attribute__((packed)); + +/* + * This is the reply packet that nbd-server sends back to the client after + * it has completed an I/O request (or an error occurs). + */ +struct nbd_reply { + __be32 magic; + __be32 error; /* 0 = ok, else error */ + char handle[8]; /* handle you got from request */ +}; +#endif /* _UAPILINUX_NBD_H */ diff --git a/include/linux/ncp.h b/include/uapi/linux/ncp.h index 99f0adeeb3f..99f0adeeb3f 100644 --- a/include/linux/ncp.h +++ b/include/uapi/linux/ncp.h diff --git a/include/linux/ncp_fs.h b/include/uapi/linux/ncp_fs.h index e13eefef065..e13eefef065 100644 --- a/include/linux/ncp_fs.h +++ b/include/uapi/linux/ncp_fs.h diff --git a/include/linux/ncp_mount.h b/include/uapi/linux/ncp_mount.h index dfcbea2d889..dfcbea2d889 100644 --- a/include/linux/ncp_mount.h +++ b/include/uapi/linux/ncp_mount.h diff --git a/include/linux/ncp_no.h b/include/uapi/linux/ncp_no.h index cddaa48fb18..cddaa48fb18 100644 --- a/include/linux/ncp_no.h +++ b/include/uapi/linux/ncp_no.h diff --git a/include/linux/neighbour.h b/include/uapi/linux/neighbour.h index 275e5d65dcb..275e5d65dcb 100644 --- a/include/linux/neighbour.h +++ b/include/uapi/linux/neighbour.h diff --git a/include/uapi/linux/net.h b/include/uapi/linux/net.h new file mode 100644 index 00000000000..9457239ed21 --- /dev/null +++ b/include/uapi/linux/net.h @@ -0,0 +1,57 @@ +/* + * NET An implementation of the SOCKET network access protocol. + * This is the master header file for the Linux NET layer, + * or, in plain English: the networking handling part of the + * kernel. + * + * Version: @(#)net.h 1.0.3 05/25/93 + * + * Authors: Orest Zborowski, <obz@Kodak.COM> + * Ross Biro + * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _UAPI_LINUX_NET_H +#define _UAPI_LINUX_NET_H + +#include <linux/socket.h> +#include <asm/socket.h> + +#define NPROTO AF_MAX + +#define SYS_SOCKET 1 /* sys_socket(2) */ +#define SYS_BIND 2 /* sys_bind(2) */ +#define SYS_CONNECT 3 /* sys_connect(2) */ +#define SYS_LISTEN 4 /* sys_listen(2) */ +#define SYS_ACCEPT 5 /* sys_accept(2) */ +#define SYS_GETSOCKNAME 6 /* sys_getsockname(2) */ +#define SYS_GETPEERNAME 7 /* sys_getpeername(2) */ +#define SYS_SOCKETPAIR 8 /* sys_socketpair(2) */ +#define SYS_SEND 9 /* sys_send(2) */ +#define SYS_RECV 10 /* sys_recv(2) */ +#define SYS_SENDTO 11 /* sys_sendto(2) */ +#define SYS_RECVFROM 12 /* sys_recvfrom(2) */ +#define SYS_SHUTDOWN 13 /* sys_shutdown(2) */ +#define SYS_SETSOCKOPT 14 /* sys_setsockopt(2) */ +#define SYS_GETSOCKOPT 15 /* sys_getsockopt(2) */ +#define SYS_SENDMSG 16 /* sys_sendmsg(2) */ +#define SYS_RECVMSG 17 /* sys_recvmsg(2) */ +#define SYS_ACCEPT4 18 /* sys_accept4(2) */ +#define SYS_RECVMMSG 19 /* sys_recvmmsg(2) */ +#define SYS_SENDMMSG 20 /* sys_sendmmsg(2) */ + +typedef enum { + SS_FREE = 0, /* not allocated */ + SS_UNCONNECTED, /* unconnected to any socket */ + SS_CONNECTING, /* in process of connecting */ + SS_CONNECTED, /* connected to socket */ + SS_DISCONNECTING /* in process of disconnecting */ +} socket_state; + +#define __SO_ACCEPTCON (1 << 16) /* performed a listen */ + +#endif /* _UAPI_LINUX_NET_H */ diff --git a/include/linux/net_dropmon.h b/include/uapi/linux/net_dropmon.h index 2a739462cae..2a739462cae 100644 --- a/include/linux/net_dropmon.h +++ b/include/uapi/linux/net_dropmon.h diff --git a/include/linux/net_tstamp.h b/include/uapi/linux/net_tstamp.h index ae5df122e42..ae5df122e42 100644 --- a/include/linux/net_tstamp.h +++ b/include/uapi/linux/net_tstamp.h diff --git a/include/uapi/linux/netdevice.h b/include/uapi/linux/netdevice.h new file mode 100644 index 00000000000..6b9500bc2d5 --- /dev/null +++ b/include/uapi/linux/netdevice.h @@ -0,0 +1,53 @@ +/* + * INET An implementation of the TCP/IP protocol suite for the LINUX + * operating system. INET is implemented using the BSD Socket + * interface as the means of communication with the user level. + * + * Definitions for the Interfaces handler. + * + * Version: @(#)dev.h 1.0.10 08/12/93 + * + * Authors: Ross Biro + * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG> + * Corey Minyard <wf-rch!minyard@relay.EU.net> + * Donald J. Becker, <becker@cesdis.gsfc.nasa.gov> + * Alan Cox, <alan@lxorguk.ukuu.org.uk> + * Bjorn Ekwall. <bj0rn@blox.se> + * Pekka Riikonen <priikone@poseidon.pspt.fi> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Moved to /usr/include/linux for NET3 + */ +#ifndef _UAPI_LINUX_NETDEVICE_H +#define _UAPI_LINUX_NETDEVICE_H + +#include <linux/if.h> +#include <linux/if_ether.h> +#include <linux/if_packet.h> +#include <linux/if_link.h> + + +#define MAX_ADDR_LEN 32 /* Largest hardware address length */ + +/* Initial net device group. All devices belong to group 0 by default. */ +#define INIT_NETDEV_GROUP 0 + + + +/* Media selection options. */ +enum { + IF_PORT_UNKNOWN = 0, + IF_PORT_10BASE2, + IF_PORT_10BASET, + IF_PORT_AUI, + IF_PORT_100BASET, + IF_PORT_100BASETX, + IF_PORT_100BASEFX +}; + + +#endif /* _UAPI_LINUX_NETDEVICE_H */ diff --git a/include/uapi/linux/netfilter.h b/include/uapi/linux/netfilter.h new file mode 100644 index 00000000000..f7dc0ebeeba --- /dev/null +++ b/include/uapi/linux/netfilter.h @@ -0,0 +1,72 @@ +#ifndef _UAPI__LINUX_NETFILTER_H +#define _UAPI__LINUX_NETFILTER_H + +#include <linux/types.h> +#include <linux/compiler.h> +#include <linux/sysctl.h> + + +/* Responses from hook functions. */ +#define NF_DROP 0 +#define NF_ACCEPT 1 +#define NF_STOLEN 2 +#define NF_QUEUE 3 +#define NF_REPEAT 4 +#define NF_STOP 5 +#define NF_MAX_VERDICT NF_STOP + +/* we overload the higher bits for encoding auxiliary data such as the queue + * number or errno values. Not nice, but better than additional function + * arguments. */ +#define NF_VERDICT_MASK 0x000000ff + +/* extra verdict flags have mask 0x0000ff00 */ +#define NF_VERDICT_FLAG_QUEUE_BYPASS 0x00008000 + +/* queue number (NF_QUEUE) or errno (NF_DROP) */ +#define NF_VERDICT_QMASK 0xffff0000 +#define NF_VERDICT_QBITS 16 + +#define NF_QUEUE_NR(x) ((((x) << 16) & NF_VERDICT_QMASK) | NF_QUEUE) + +#define NF_DROP_ERR(x) (((-x) << 16) | NF_DROP) + +/* only for userspace compatibility */ +#ifndef __KERNEL__ +/* Generic cache responses from hook functions. + <= 0x2000 is used for protocol-flags. */ +#define NFC_UNKNOWN 0x4000 +#define NFC_ALTERED 0x8000 + +/* NF_VERDICT_BITS should be 8 now, but userspace might break if this changes */ +#define NF_VERDICT_BITS 16 +#endif + +enum nf_inet_hooks { + NF_INET_PRE_ROUTING, + NF_INET_LOCAL_IN, + NF_INET_FORWARD, + NF_INET_LOCAL_OUT, + NF_INET_POST_ROUTING, + NF_INET_NUMHOOKS +}; + +enum { + NFPROTO_UNSPEC = 0, + NFPROTO_IPV4 = 2, + NFPROTO_ARP = 3, + NFPROTO_BRIDGE = 7, + NFPROTO_IPV6 = 10, + NFPROTO_DECNET = 12, + NFPROTO_NUMPROTO, +}; + +union nf_inet_addr { + __u32 all[4]; + __be32 ip; + __be32 ip6[4]; + struct in_addr in; + struct in6_addr in6; +}; + +#endif /* _UAPI__LINUX_NETFILTER_H */ diff --git a/include/linux/netfilter_arp.h b/include/uapi/linux/netfilter_arp.h index 92bc6ddcbf7..92bc6ddcbf7 100644 --- a/include/linux/netfilter_arp.h +++ b/include/uapi/linux/netfilter_arp.h diff --git a/include/uapi/linux/netfilter_bridge.h b/include/uapi/linux/netfilter_bridge.h new file mode 100644 index 00000000000..a5eda6db8d7 --- /dev/null +++ b/include/uapi/linux/netfilter_bridge.h @@ -0,0 +1,27 @@ +#ifndef _UAPI__LINUX_BRIDGE_NETFILTER_H +#define _UAPI__LINUX_BRIDGE_NETFILTER_H + +/* bridge-specific defines for netfilter. + */ + +#include <linux/netfilter.h> +#include <linux/if_ether.h> +#include <linux/if_vlan.h> +#include <linux/if_pppox.h> + +/* Bridge Hooks */ +/* After promisc drops, checksum checks. */ +#define NF_BR_PRE_ROUTING 0 +/* If the packet is destined for this box. */ +#define NF_BR_LOCAL_IN 1 +/* If the packet is destined for another interface. */ +#define NF_BR_FORWARD 2 +/* Packets coming from a local process. */ +#define NF_BR_LOCAL_OUT 3 +/* Packets about to hit the wire. */ +#define NF_BR_POST_ROUTING 4 +/* Not really a hook, but used for the ebtables broute table */ +#define NF_BR_BROUTING 5 +#define NF_BR_NUMHOOKS 6 + +#endif /* _UAPI__LINUX_BRIDGE_NETFILTER_H */ diff --git a/include/linux/netfilter_decnet.h b/include/uapi/linux/netfilter_decnet.h index 0b09732aacd..0b09732aacd 100644 --- a/include/linux/netfilter_decnet.h +++ b/include/uapi/linux/netfilter_decnet.h diff --git a/include/uapi/linux/netfilter_ipv4.h b/include/uapi/linux/netfilter_ipv4.h new file mode 100644 index 00000000000..91ddd1f6fd4 --- /dev/null +++ b/include/uapi/linux/netfilter_ipv4.h @@ -0,0 +1,81 @@ +/* IPv4-specific defines for netfilter. + * (C)1998 Rusty Russell -- This code is GPL. + */ +#ifndef _UAPI__LINUX_IP_NETFILTER_H +#define _UAPI__LINUX_IP_NETFILTER_H + + +#include <linux/netfilter.h> + +/* only for userspace compatibility */ +#ifndef __KERNEL__ + +#include <limits.h> /* for INT_MIN, INT_MAX */ + +/* IP Cache bits. */ +/* Src IP address. */ +#define NFC_IP_SRC 0x0001 +/* Dest IP address. */ +#define NFC_IP_DST 0x0002 +/* Input device. */ +#define NFC_IP_IF_IN 0x0004 +/* Output device. */ +#define NFC_IP_IF_OUT 0x0008 +/* TOS. */ +#define NFC_IP_TOS 0x0010 +/* Protocol. */ +#define NFC_IP_PROTO 0x0020 +/* IP options. */ +#define NFC_IP_OPTIONS 0x0040 +/* Frag & flags. */ +#define NFC_IP_FRAG 0x0080 + +/* Per-protocol information: only matters if proto match. */ +/* TCP flags. */ +#define NFC_IP_TCPFLAGS 0x0100 +/* Source port. */ +#define NFC_IP_SRC_PT 0x0200 +/* Dest port. */ +#define NFC_IP_DST_PT 0x0400 +/* Something else about the proto */ +#define NFC_IP_PROTO_UNKNOWN 0x2000 + +/* IP Hooks */ +/* After promisc drops, checksum checks. */ +#define NF_IP_PRE_ROUTING 0 +/* If the packet is destined for this box. */ +#define NF_IP_LOCAL_IN 1 +/* If the packet is destined for another interface. */ +#define NF_IP_FORWARD 2 +/* Packets coming from a local process. */ +#define NF_IP_LOCAL_OUT 3 +/* Packets about to hit the wire. */ +#define NF_IP_POST_ROUTING 4 +#define NF_IP_NUMHOOKS 5 +#endif /* ! __KERNEL__ */ + +enum nf_ip_hook_priorities { + NF_IP_PRI_FIRST = INT_MIN, + NF_IP_PRI_CONNTRACK_DEFRAG = -400, + NF_IP_PRI_RAW = -300, + NF_IP_PRI_SELINUX_FIRST = -225, + NF_IP_PRI_CONNTRACK = -200, + NF_IP_PRI_MANGLE = -150, + NF_IP_PRI_NAT_DST = -100, + NF_IP_PRI_FILTER = 0, + NF_IP_PRI_SECURITY = 50, + NF_IP_PRI_NAT_SRC = 100, + NF_IP_PRI_SELINUX_LAST = 225, + NF_IP_PRI_CONNTRACK_HELPER = 300, + NF_IP_PRI_CONNTRACK_CONFIRM = INT_MAX, + NF_IP_PRI_LAST = INT_MAX, +}; + +/* Arguments for setsockopt SOL_IP: */ +/* 2.0 firewalling went from 64 through 71 (and +256, +512, etc). */ +/* 2.2 firewalling (+ masq) went from 64 through 76 */ +/* 2.4 firewalling went 64 through 67. */ +#define SO_ORIGINAL_DST 80 + + +#endif /* _UAPI__LINUX_IP_NETFILTER_H */ diff --git a/include/uapi/linux/netfilter_ipv6.h b/include/uapi/linux/netfilter_ipv6.h new file mode 100644 index 00000000000..12497c6c794 --- /dev/null +++ b/include/uapi/linux/netfilter_ipv6.h @@ -0,0 +1,79 @@ +/* IPv6-specific defines for netfilter. + * (C)1998 Rusty Russell -- This code is GPL. + * (C)1999 David Jeffery + * this header was blatantly ripped from netfilter_ipv4.h + * it's amazing what adding a bunch of 6s can do =8^) + */ +#ifndef _UAPI__LINUX_IP6_NETFILTER_H +#define _UAPI__LINUX_IP6_NETFILTER_H + + +#include <linux/netfilter.h> + +/* only for userspace compatibility */ +#ifndef __KERNEL__ + +#include <limits.h> /* for INT_MIN, INT_MAX */ + +/* IP Cache bits. */ +/* Src IP address. */ +#define NFC_IP6_SRC 0x0001 +/* Dest IP address. */ +#define NFC_IP6_DST 0x0002 +/* Input device. */ +#define NFC_IP6_IF_IN 0x0004 +/* Output device. */ +#define NFC_IP6_IF_OUT 0x0008 +/* TOS. */ +#define NFC_IP6_TOS 0x0010 +/* Protocol. */ +#define NFC_IP6_PROTO 0x0020 +/* IP options. */ +#define NFC_IP6_OPTIONS 0x0040 +/* Frag & flags. */ +#define NFC_IP6_FRAG 0x0080 + + +/* Per-protocol information: only matters if proto match. */ +/* TCP flags. */ +#define NFC_IP6_TCPFLAGS 0x0100 +/* Source port. */ +#define NFC_IP6_SRC_PT 0x0200 +/* Dest port. */ +#define NFC_IP6_DST_PT 0x0400 +/* Something else about the proto */ +#define NFC_IP6_PROTO_UNKNOWN 0x2000 + +/* IP6 Hooks */ +/* After promisc drops, checksum checks. */ +#define NF_IP6_PRE_ROUTING 0 +/* If the packet is destined for this box. */ +#define NF_IP6_LOCAL_IN 1 +/* If the packet is destined for another interface. */ +#define NF_IP6_FORWARD 2 +/* Packets coming from a local process. */ +#define NF_IP6_LOCAL_OUT 3 +/* Packets about to hit the wire. */ +#define NF_IP6_POST_ROUTING 4 +#define NF_IP6_NUMHOOKS 5 +#endif /* ! __KERNEL__ */ + + +enum nf_ip6_hook_priorities { + NF_IP6_PRI_FIRST = INT_MIN, + NF_IP6_PRI_CONNTRACK_DEFRAG = -400, + NF_IP6_PRI_RAW = -300, + NF_IP6_PRI_SELINUX_FIRST = -225, + NF_IP6_PRI_CONNTRACK = -200, + NF_IP6_PRI_MANGLE = -150, + NF_IP6_PRI_NAT_DST = -100, + NF_IP6_PRI_FILTER = 0, + NF_IP6_PRI_SECURITY = 50, + NF_IP6_PRI_NAT_SRC = 100, + NF_IP6_PRI_SELINUX_LAST = 225, + NF_IP6_PRI_CONNTRACK_HELPER = 300, + NF_IP6_PRI_LAST = INT_MAX, +}; + + +#endif /* _UAPI__LINUX_IP6_NETFILTER_H */ diff --git a/include/uapi/linux/netlink.h b/include/uapi/linux/netlink.h new file mode 100644 index 00000000000..78d5b8a546d --- /dev/null +++ b/include/uapi/linux/netlink.h @@ -0,0 +1,153 @@ +#ifndef _UAPI__LINUX_NETLINK_H +#define _UAPI__LINUX_NETLINK_H + +#include <linux/socket.h> /* for __kernel_sa_family_t */ +#include <linux/types.h> + +#define NETLINK_ROUTE 0 /* Routing/device hook */ +#define NETLINK_UNUSED 1 /* Unused number */ +#define NETLINK_USERSOCK 2 /* Reserved for user mode socket protocols */ +#define NETLINK_FIREWALL 3 /* Unused number, formerly ip_queue */ +#define NETLINK_SOCK_DIAG 4 /* socket monitoring */ +#define NETLINK_NFLOG 5 /* netfilter/iptables ULOG */ +#define NETLINK_XFRM 6 /* ipsec */ +#define NETLINK_SELINUX 7 /* SELinux event notifications */ +#define NETLINK_ISCSI 8 /* Open-iSCSI */ +#define NETLINK_AUDIT 9 /* auditing */ +#define NETLINK_FIB_LOOKUP 10 +#define NETLINK_CONNECTOR 11 +#define NETLINK_NETFILTER 12 /* netfilter subsystem */ +#define NETLINK_IP6_FW 13 +#define NETLINK_DNRTMSG 14 /* DECnet routing messages */ +#define NETLINK_KOBJECT_UEVENT 15 /* Kernel messages to userspace */ +#define NETLINK_GENERIC 16 +/* leave room for NETLINK_DM (DM Events) */ +#define NETLINK_SCSITRANSPORT 18 /* SCSI Transports */ +#define NETLINK_ECRYPTFS 19 +#define NETLINK_RDMA 20 +#define NETLINK_CRYPTO 21 /* Crypto layer */ + +#define NETLINK_INET_DIAG NETLINK_SOCK_DIAG + +#define MAX_LINKS 32 + +struct sockaddr_nl { + __kernel_sa_family_t nl_family; /* AF_NETLINK */ + unsigned short nl_pad; /* zero */ + __u32 nl_pid; /* port ID */ + __u32 nl_groups; /* multicast groups mask */ +}; + +struct nlmsghdr { + __u32 nlmsg_len; /* Length of message including header */ + __u16 nlmsg_type; /* Message content */ + __u16 nlmsg_flags; /* Additional flags */ + __u32 nlmsg_seq; /* Sequence number */ + __u32 nlmsg_pid; /* Sending process port ID */ +}; + +/* Flags values */ + +#define NLM_F_REQUEST 1 /* It is request message. */ +#define NLM_F_MULTI 2 /* Multipart message, terminated by NLMSG_DONE */ +#define NLM_F_ACK 4 /* Reply with ack, with zero or error code */ +#define NLM_F_ECHO 8 /* Echo this request */ +#define NLM_F_DUMP_INTR 16 /* Dump was inconsistent due to sequence change */ + +/* Modifiers to GET request */ +#define NLM_F_ROOT 0x100 /* specify tree root */ +#define NLM_F_MATCH 0x200 /* return all matching */ +#define NLM_F_ATOMIC 0x400 /* atomic GET */ +#define NLM_F_DUMP (NLM_F_ROOT|NLM_F_MATCH) + +/* Modifiers to NEW request */ +#define NLM_F_REPLACE 0x100 /* Override existing */ +#define NLM_F_EXCL 0x200 /* Do not touch, if it exists */ +#define NLM_F_CREATE 0x400 /* Create, if it does not exist */ +#define NLM_F_APPEND 0x800 /* Add to end of list */ + +/* + 4.4BSD ADD NLM_F_CREATE|NLM_F_EXCL + 4.4BSD CHANGE NLM_F_REPLACE + + True CHANGE NLM_F_CREATE|NLM_F_REPLACE + Append NLM_F_CREATE + Check NLM_F_EXCL + */ + +#define NLMSG_ALIGNTO 4U +#define NLMSG_ALIGN(len) ( ((len)+NLMSG_ALIGNTO-1) & ~(NLMSG_ALIGNTO-1) ) +#define NLMSG_HDRLEN ((int) NLMSG_ALIGN(sizeof(struct nlmsghdr))) +#define NLMSG_LENGTH(len) ((len)+NLMSG_ALIGN(NLMSG_HDRLEN)) +#define NLMSG_SPACE(len) NLMSG_ALIGN(NLMSG_LENGTH(len)) +#define NLMSG_DATA(nlh) ((void*)(((char*)nlh) + NLMSG_LENGTH(0))) +#define NLMSG_NEXT(nlh,len) ((len) -= NLMSG_ALIGN((nlh)->nlmsg_len), \ + (struct nlmsghdr*)(((char*)(nlh)) + NLMSG_ALIGN((nlh)->nlmsg_len))) +#define NLMSG_OK(nlh,len) ((len) >= (int)sizeof(struct nlmsghdr) && \ + (nlh)->nlmsg_len >= sizeof(struct nlmsghdr) && \ + (nlh)->nlmsg_len <= (len)) +#define NLMSG_PAYLOAD(nlh,len) ((nlh)->nlmsg_len - NLMSG_SPACE((len))) + +#define NLMSG_NOOP 0x1 /* Nothing. */ +#define NLMSG_ERROR 0x2 /* Error */ +#define NLMSG_DONE 0x3 /* End of a dump */ +#define NLMSG_OVERRUN 0x4 /* Data lost */ + +#define NLMSG_MIN_TYPE 0x10 /* < 0x10: reserved control messages */ + +struct nlmsgerr { + int error; + struct nlmsghdr msg; +}; + +#define NETLINK_ADD_MEMBERSHIP 1 +#define NETLINK_DROP_MEMBERSHIP 2 +#define NETLINK_PKTINFO 3 +#define NETLINK_BROADCAST_ERROR 4 +#define NETLINK_NO_ENOBUFS 5 + +struct nl_pktinfo { + __u32 group; +}; + +#define NET_MAJOR 36 /* Major 36 is reserved for networking */ + +enum { + NETLINK_UNCONNECTED = 0, + NETLINK_CONNECTED, +}; + +/* + * <------- NLA_HDRLEN ------> <-- NLA_ALIGN(payload)--> + * +---------------------+- - -+- - - - - - - - - -+- - -+ + * | Header | Pad | Payload | Pad | + * | (struct nlattr) | ing | | ing | + * +---------------------+- - -+- - - - - - - - - -+- - -+ + * <-------------- nlattr->nla_len --------------> + */ + +struct nlattr { + __u16 nla_len; + __u16 nla_type; +}; + +/* + * nla_type (16 bits) + * +---+---+-------------------------------+ + * | N | O | Attribute Type | + * +---+---+-------------------------------+ + * N := Carries nested attributes + * O := Payload stored in network byte order + * + * Note: The N and O flag are mutually exclusive. + */ +#define NLA_F_NESTED (1 << 15) +#define NLA_F_NET_BYTEORDER (1 << 14) +#define NLA_TYPE_MASK ~(NLA_F_NESTED | NLA_F_NET_BYTEORDER) + +#define NLA_ALIGNTO 4 +#define NLA_ALIGN(len) (((len) + NLA_ALIGNTO - 1) & ~(NLA_ALIGNTO - 1)) +#define NLA_HDRLEN ((int) NLA_ALIGN(sizeof(struct nlattr))) + + +#endif /* _UAPI__LINUX_NETLINK_H */ diff --git a/include/linux/netrom.h b/include/uapi/linux/netrom.h index af7313cc9cb..af7313cc9cb 100644 --- a/include/linux/netrom.h +++ b/include/uapi/linux/netrom.h diff --git a/include/linux/nfc.h b/include/uapi/linux/nfc.h index d908d17da56..d908d17da56 100644 --- a/include/linux/nfc.h +++ b/include/uapi/linux/nfc.h diff --git a/include/uapi/linux/nfs.h b/include/uapi/linux/nfs.h new file mode 100644 index 00000000000..5199a36dd57 --- /dev/null +++ b/include/uapi/linux/nfs.h @@ -0,0 +1,131 @@ +/* + * NFS protocol definitions + * + * This file contains constants mostly for Version 2 of the protocol, + * but also has a couple of NFSv3 bits in (notably the error codes). + */ +#ifndef _UAPI_LINUX_NFS_H +#define _UAPI_LINUX_NFS_H + +#define NFS_PROGRAM 100003 +#define NFS_PORT 2049 +#define NFS_MAXDATA 8192 +#define NFS_MAXPATHLEN 1024 +#define NFS_MAXNAMLEN 255 +#define NFS_MAXGROUPS 16 +#define NFS_FHSIZE 32 +#define NFS_COOKIESIZE 4 +#define NFS_FIFO_DEV (-1) +#define NFSMODE_FMT 0170000 +#define NFSMODE_DIR 0040000 +#define NFSMODE_CHR 0020000 +#define NFSMODE_BLK 0060000 +#define NFSMODE_REG 0100000 +#define NFSMODE_LNK 0120000 +#define NFSMODE_SOCK 0140000 +#define NFSMODE_FIFO 0010000 + +#define NFS_MNT_PROGRAM 100005 +#define NFS_MNT_VERSION 1 +#define NFS_MNT3_VERSION 3 + +#define NFS_PIPE_DIRNAME "nfs" + +/* + * NFS stats. The good thing with these values is that NFSv3 errors are + * a superset of NFSv2 errors (with the exception of NFSERR_WFLUSH which + * no-one uses anyway), so we can happily mix code as long as we make sure + * no NFSv3 errors are returned to NFSv2 clients. + * Error codes that have a `--' in the v2 column are not part of the + * standard, but seem to be widely used nevertheless. + */ + enum nfs_stat { + NFS_OK = 0, /* v2 v3 v4 */ + NFSERR_PERM = 1, /* v2 v3 v4 */ + NFSERR_NOENT = 2, /* v2 v3 v4 */ + NFSERR_IO = 5, /* v2 v3 v4 */ + NFSERR_NXIO = 6, /* v2 v3 v4 */ + NFSERR_EAGAIN = 11, /* v2 v3 */ + NFSERR_ACCES = 13, /* v2 v3 v4 */ + NFSERR_EXIST = 17, /* v2 v3 v4 */ + NFSERR_XDEV = 18, /* v3 v4 */ + NFSERR_NODEV = 19, /* v2 v3 v4 */ + NFSERR_NOTDIR = 20, /* v2 v3 v4 */ + NFSERR_ISDIR = 21, /* v2 v3 v4 */ + NFSERR_INVAL = 22, /* v2 v3 v4 */ + NFSERR_FBIG = 27, /* v2 v3 v4 */ + NFSERR_NOSPC = 28, /* v2 v3 v4 */ + NFSERR_ROFS = 30, /* v2 v3 v4 */ + NFSERR_MLINK = 31, /* v3 v4 */ + NFSERR_OPNOTSUPP = 45, /* v2 v3 */ + NFSERR_NAMETOOLONG = 63, /* v2 v3 v4 */ + NFSERR_NOTEMPTY = 66, /* v2 v3 v4 */ + NFSERR_DQUOT = 69, /* v2 v3 v4 */ + NFSERR_STALE = 70, /* v2 v3 v4 */ + NFSERR_REMOTE = 71, /* v2 v3 */ + NFSERR_WFLUSH = 99, /* v2 */ + NFSERR_BADHANDLE = 10001, /* v3 v4 */ + NFSERR_NOT_SYNC = 10002, /* v3 */ + NFSERR_BAD_COOKIE = 10003, /* v3 v4 */ + NFSERR_NOTSUPP = 10004, /* v3 v4 */ + NFSERR_TOOSMALL = 10005, /* v3 v4 */ + NFSERR_SERVERFAULT = 10006, /* v3 v4 */ + NFSERR_BADTYPE = 10007, /* v3 v4 */ + NFSERR_JUKEBOX = 10008, /* v3 v4 */ + NFSERR_SAME = 10009, /* v4 */ + NFSERR_DENIED = 10010, /* v4 */ + NFSERR_EXPIRED = 10011, /* v4 */ + NFSERR_LOCKED = 10012, /* v4 */ + NFSERR_GRACE = 10013, /* v4 */ + NFSERR_FHEXPIRED = 10014, /* v4 */ + NFSERR_SHARE_DENIED = 10015, /* v4 */ + NFSERR_WRONGSEC = 10016, /* v4 */ + NFSERR_CLID_INUSE = 10017, /* v4 */ + NFSERR_RESOURCE = 10018, /* v4 */ + NFSERR_MOVED = 10019, /* v4 */ + NFSERR_NOFILEHANDLE = 10020, /* v4 */ + NFSERR_MINOR_VERS_MISMATCH = 10021, /* v4 */ + NFSERR_STALE_CLIENTID = 10022, /* v4 */ + NFSERR_STALE_STATEID = 10023, /* v4 */ + NFSERR_OLD_STATEID = 10024, /* v4 */ + NFSERR_BAD_STATEID = 10025, /* v4 */ + NFSERR_BAD_SEQID = 10026, /* v4 */ + NFSERR_NOT_SAME = 10027, /* v4 */ + NFSERR_LOCK_RANGE = 10028, /* v4 */ + NFSERR_SYMLINK = 10029, /* v4 */ + NFSERR_RESTOREFH = 10030, /* v4 */ + NFSERR_LEASE_MOVED = 10031, /* v4 */ + NFSERR_ATTRNOTSUPP = 10032, /* v4 */ + NFSERR_NO_GRACE = 10033, /* v4 */ + NFSERR_RECLAIM_BAD = 10034, /* v4 */ + NFSERR_RECLAIM_CONFLICT = 10035,/* v4 */ + NFSERR_BAD_XDR = 10036, /* v4 */ + NFSERR_LOCKS_HELD = 10037, /* v4 */ + NFSERR_OPENMODE = 10038, /* v4 */ + NFSERR_BADOWNER = 10039, /* v4 */ + NFSERR_BADCHAR = 10040, /* v4 */ + NFSERR_BADNAME = 10041, /* v4 */ + NFSERR_BAD_RANGE = 10042, /* v4 */ + NFSERR_LOCK_NOTSUPP = 10043, /* v4 */ + NFSERR_OP_ILLEGAL = 10044, /* v4 */ + NFSERR_DEADLOCK = 10045, /* v4 */ + NFSERR_FILE_OPEN = 10046, /* v4 */ + NFSERR_ADMIN_REVOKED = 10047, /* v4 */ + NFSERR_CB_PATH_DOWN = 10048, /* v4 */ +}; + +/* NFSv2 file types - beware, these are not the same in NFSv3 */ + +enum nfs_ftype { + NFNON = 0, + NFREG = 1, + NFDIR = 2, + NFBLK = 3, + NFCHR = 4, + NFLNK = 5, + NFSOCK = 6, + NFBAD = 7, + NFFIFO = 8 +}; + +#endif /* _UAPI_LINUX_NFS_H */ diff --git a/include/linux/nfs2.h b/include/uapi/linux/nfs2.h index fde24b30cc9..fde24b30cc9 100644 --- a/include/linux/nfs2.h +++ b/include/uapi/linux/nfs2.h diff --git a/include/uapi/linux/nfs3.h b/include/uapi/linux/nfs3.h new file mode 100644 index 00000000000..231ef4e6982 --- /dev/null +++ b/include/uapi/linux/nfs3.h @@ -0,0 +1,97 @@ +/* + * NFSv3 protocol definitions + */ +#ifndef _UAPI_LINUX_NFS3_H +#define _UAPI_LINUX_NFS3_H + +#define NFS3_PORT 2049 +#define NFS3_MAXDATA 32768 +#define NFS3_MAXPATHLEN PATH_MAX +#define NFS3_MAXNAMLEN NAME_MAX +#define NFS3_MAXGROUPS 16 +#define NFS3_FHSIZE 64 +#define NFS3_COOKIESIZE 4 +#define NFS3_CREATEVERFSIZE 8 +#define NFS3_COOKIEVERFSIZE 8 +#define NFS3_WRITEVERFSIZE 8 +#define NFS3_FIFO_DEV (-1) +#define NFS3MODE_FMT 0170000 +#define NFS3MODE_DIR 0040000 +#define NFS3MODE_CHR 0020000 +#define NFS3MODE_BLK 0060000 +#define NFS3MODE_REG 0100000 +#define NFS3MODE_LNK 0120000 +#define NFS3MODE_SOCK 0140000 +#define NFS3MODE_FIFO 0010000 + +/* Flags for access() call */ +#define NFS3_ACCESS_READ 0x0001 +#define NFS3_ACCESS_LOOKUP 0x0002 +#define NFS3_ACCESS_MODIFY 0x0004 +#define NFS3_ACCESS_EXTEND 0x0008 +#define NFS3_ACCESS_DELETE 0x0010 +#define NFS3_ACCESS_EXECUTE 0x0020 +#define NFS3_ACCESS_FULL 0x003f + +/* Flags for create mode */ +enum nfs3_createmode { + NFS3_CREATE_UNCHECKED = 0, + NFS3_CREATE_GUARDED = 1, + NFS3_CREATE_EXCLUSIVE = 2 +}; + +/* NFSv3 file system properties */ +#define NFS3_FSF_LINK 0x0001 +#define NFS3_FSF_SYMLINK 0x0002 +#define NFS3_FSF_HOMOGENEOUS 0x0008 +#define NFS3_FSF_CANSETTIME 0x0010 +/* Some shorthands. See fs/nfsd/nfs3proc.c */ +#define NFS3_FSF_DEFAULT 0x001B +#define NFS3_FSF_BILLYBOY 0x0018 +#define NFS3_FSF_READONLY 0x0008 + +enum nfs3_ftype { + NF3NON = 0, + NF3REG = 1, + NF3DIR = 2, + NF3BLK = 3, + NF3CHR = 4, + NF3LNK = 5, + NF3SOCK = 6, + NF3FIFO = 7, /* changed from NFSv2 (was 8) */ + NF3BAD = 8 +}; + +struct nfs3_fh { + unsigned short size; + unsigned char data[NFS3_FHSIZE]; +}; + +#define NFS3_VERSION 3 +#define NFS3PROC_NULL 0 +#define NFS3PROC_GETATTR 1 +#define NFS3PROC_SETATTR 2 +#define NFS3PROC_LOOKUP 3 +#define NFS3PROC_ACCESS 4 +#define NFS3PROC_READLINK 5 +#define NFS3PROC_READ 6 +#define NFS3PROC_WRITE 7 +#define NFS3PROC_CREATE 8 +#define NFS3PROC_MKDIR 9 +#define NFS3PROC_SYMLINK 10 +#define NFS3PROC_MKNOD 11 +#define NFS3PROC_REMOVE 12 +#define NFS3PROC_RMDIR 13 +#define NFS3PROC_RENAME 14 +#define NFS3PROC_LINK 15 +#define NFS3PROC_READDIR 16 +#define NFS3PROC_READDIRPLUS 17 +#define NFS3PROC_FSSTAT 18 +#define NFS3PROC_FSINFO 19 +#define NFS3PROC_PATHCONF 20 +#define NFS3PROC_COMMIT 21 + +#define NFS_MNT3_VERSION 3 + + +#endif /* _UAPI_LINUX_NFS3_H */ diff --git a/include/uapi/linux/nfs4.h b/include/uapi/linux/nfs4.h new file mode 100644 index 00000000000..788128ebac4 --- /dev/null +++ b/include/uapi/linux/nfs4.h @@ -0,0 +1,178 @@ +/* + * include/linux/nfs4.h + * + * NFSv4 protocol definitions. + * + * Copyright (c) 2002 The Regents of the University of Michigan. + * All rights reserved. + * + * Kendrick Smith <kmsmith@umich.edu> + * Andy Adamson <andros@umich.edu> + */ + +#ifndef _UAPI_LINUX_NFS4_H +#define _UAPI_LINUX_NFS4_H + +#include <linux/types.h> + +#define NFS4_BITMAP_SIZE 2 +#define NFS4_VERIFIER_SIZE 8 +#define NFS4_STATEID_SEQID_SIZE 4 +#define NFS4_STATEID_OTHER_SIZE 12 +#define NFS4_STATEID_SIZE (NFS4_STATEID_SEQID_SIZE + NFS4_STATEID_OTHER_SIZE) +#define NFS4_FHSIZE 128 +#define NFS4_MAXPATHLEN PATH_MAX +#define NFS4_MAXNAMLEN NAME_MAX +#define NFS4_OPAQUE_LIMIT 1024 +#define NFS4_MAX_SESSIONID_LEN 16 + +#define NFS4_ACCESS_READ 0x0001 +#define NFS4_ACCESS_LOOKUP 0x0002 +#define NFS4_ACCESS_MODIFY 0x0004 +#define NFS4_ACCESS_EXTEND 0x0008 +#define NFS4_ACCESS_DELETE 0x0010 +#define NFS4_ACCESS_EXECUTE 0x0020 + +#define NFS4_FH_PERSISTENT 0x0000 +#define NFS4_FH_NOEXPIRE_WITH_OPEN 0x0001 +#define NFS4_FH_VOLATILE_ANY 0x0002 +#define NFS4_FH_VOL_MIGRATION 0x0004 +#define NFS4_FH_VOL_RENAME 0x0008 + +#define NFS4_OPEN_RESULT_CONFIRM 0x0002 +#define NFS4_OPEN_RESULT_LOCKTYPE_POSIX 0x0004 + +#define NFS4_SHARE_ACCESS_MASK 0x000F +#define NFS4_SHARE_ACCESS_READ 0x0001 +#define NFS4_SHARE_ACCESS_WRITE 0x0002 +#define NFS4_SHARE_ACCESS_BOTH 0x0003 +#define NFS4_SHARE_DENY_READ 0x0001 +#define NFS4_SHARE_DENY_WRITE 0x0002 +#define NFS4_SHARE_DENY_BOTH 0x0003 + +/* nfs41 */ +#define NFS4_SHARE_WANT_MASK 0xFF00 +#define NFS4_SHARE_WANT_NO_PREFERENCE 0x0000 +#define NFS4_SHARE_WANT_READ_DELEG 0x0100 +#define NFS4_SHARE_WANT_WRITE_DELEG 0x0200 +#define NFS4_SHARE_WANT_ANY_DELEG 0x0300 +#define NFS4_SHARE_WANT_NO_DELEG 0x0400 +#define NFS4_SHARE_WANT_CANCEL 0x0500 + +#define NFS4_SHARE_WHEN_MASK 0xF0000 +#define NFS4_SHARE_SIGNAL_DELEG_WHEN_RESRC_AVAIL 0x10000 +#define NFS4_SHARE_PUSH_DELEG_WHEN_UNCONTENDED 0x20000 + +#define NFS4_CDFC4_FORE 0x1 +#define NFS4_CDFC4_BACK 0x2 +#define NFS4_CDFC4_BOTH 0x3 +#define NFS4_CDFC4_FORE_OR_BOTH 0x3 +#define NFS4_CDFC4_BACK_OR_BOTH 0x7 + +#define NFS4_CDFS4_FORE 0x1 +#define NFS4_CDFS4_BACK 0x2 +#define NFS4_CDFS4_BOTH 0x3 + +#define NFS4_SET_TO_SERVER_TIME 0 +#define NFS4_SET_TO_CLIENT_TIME 1 + +#define NFS4_ACE_ACCESS_ALLOWED_ACE_TYPE 0 +#define NFS4_ACE_ACCESS_DENIED_ACE_TYPE 1 +#define NFS4_ACE_SYSTEM_AUDIT_ACE_TYPE 2 +#define NFS4_ACE_SYSTEM_ALARM_ACE_TYPE 3 + +#define ACL4_SUPPORT_ALLOW_ACL 0x01 +#define ACL4_SUPPORT_DENY_ACL 0x02 +#define ACL4_SUPPORT_AUDIT_ACL 0x04 +#define ACL4_SUPPORT_ALARM_ACL 0x08 + +#define NFS4_ACE_FILE_INHERIT_ACE 0x00000001 +#define NFS4_ACE_DIRECTORY_INHERIT_ACE 0x00000002 +#define NFS4_ACE_NO_PROPAGATE_INHERIT_ACE 0x00000004 +#define NFS4_ACE_INHERIT_ONLY_ACE 0x00000008 +#define NFS4_ACE_SUCCESSFUL_ACCESS_ACE_FLAG 0x00000010 +#define NFS4_ACE_FAILED_ACCESS_ACE_FLAG 0x00000020 +#define NFS4_ACE_IDENTIFIER_GROUP 0x00000040 + +#define NFS4_ACE_READ_DATA 0x00000001 +#define NFS4_ACE_LIST_DIRECTORY 0x00000001 +#define NFS4_ACE_WRITE_DATA 0x00000002 +#define NFS4_ACE_ADD_FILE 0x00000002 +#define NFS4_ACE_APPEND_DATA 0x00000004 +#define NFS4_ACE_ADD_SUBDIRECTORY 0x00000004 +#define NFS4_ACE_READ_NAMED_ATTRS 0x00000008 +#define NFS4_ACE_WRITE_NAMED_ATTRS 0x00000010 +#define NFS4_ACE_EXECUTE 0x00000020 +#define NFS4_ACE_DELETE_CHILD 0x00000040 +#define NFS4_ACE_READ_ATTRIBUTES 0x00000080 +#define NFS4_ACE_WRITE_ATTRIBUTES 0x00000100 +#define NFS4_ACE_DELETE 0x00010000 +#define NFS4_ACE_READ_ACL 0x00020000 +#define NFS4_ACE_WRITE_ACL 0x00040000 +#define NFS4_ACE_WRITE_OWNER 0x00080000 +#define NFS4_ACE_SYNCHRONIZE 0x00100000 +#define NFS4_ACE_GENERIC_READ 0x00120081 +#define NFS4_ACE_GENERIC_WRITE 0x00160106 +#define NFS4_ACE_GENERIC_EXECUTE 0x001200A0 +#define NFS4_ACE_MASK_ALL 0x001F01FF + +#define EXCHGID4_FLAG_SUPP_MOVED_REFER 0x00000001 +#define EXCHGID4_FLAG_SUPP_MOVED_MIGR 0x00000002 +#define EXCHGID4_FLAG_BIND_PRINC_STATEID 0x00000100 + +#define EXCHGID4_FLAG_USE_NON_PNFS 0x00010000 +#define EXCHGID4_FLAG_USE_PNFS_MDS 0x00020000 +#define EXCHGID4_FLAG_USE_PNFS_DS 0x00040000 +#define EXCHGID4_FLAG_MASK_PNFS 0x00070000 + +#define EXCHGID4_FLAG_UPD_CONFIRMED_REC_A 0x40000000 +#define EXCHGID4_FLAG_CONFIRMED_R 0x80000000 +/* + * Since the validity of these bits depends on whether + * they're set in the argument or response, have separate + * invalid flag masks for arg (_A) and resp (_R). + */ +#define EXCHGID4_FLAG_MASK_A 0x40070103 +#define EXCHGID4_FLAG_MASK_R 0x80070103 + +#define SEQ4_STATUS_CB_PATH_DOWN 0x00000001 +#define SEQ4_STATUS_CB_GSS_CONTEXTS_EXPIRING 0x00000002 +#define SEQ4_STATUS_CB_GSS_CONTEXTS_EXPIRED 0x00000004 +#define SEQ4_STATUS_EXPIRED_ALL_STATE_REVOKED 0x00000008 +#define SEQ4_STATUS_EXPIRED_SOME_STATE_REVOKED 0x00000010 +#define SEQ4_STATUS_ADMIN_STATE_REVOKED 0x00000020 +#define SEQ4_STATUS_RECALLABLE_STATE_REVOKED 0x00000040 +#define SEQ4_STATUS_LEASE_MOVED 0x00000080 +#define SEQ4_STATUS_RESTART_RECLAIM_NEEDED 0x00000100 +#define SEQ4_STATUS_CB_PATH_DOWN_SESSION 0x00000200 +#define SEQ4_STATUS_BACKCHANNEL_FAULT 0x00000400 + +#define NFS4_SECINFO_STYLE4_CURRENT_FH 0 +#define NFS4_SECINFO_STYLE4_PARENT 1 + +#define NFS4_MAX_UINT64 (~(u64)0) + +/* An NFS4 sessions server must support at least NFS4_MAX_OPS operations. + * If a compound requires more operations, adjust NFS4_MAX_OPS accordingly. + */ +#define NFS4_MAX_OPS 8 + +/* Our NFS4 client back channel server only wants the cb_sequene and the + * actual operation per compound + */ +#define NFS4_MAX_BACK_CHANNEL_OPS 2 + +enum nfs4_acl_whotype { + NFS4_ACL_WHO_NAMED = 0, + NFS4_ACL_WHO_OWNER, + NFS4_ACL_WHO_GROUP, + NFS4_ACL_WHO_EVERYONE, +}; + +#endif /* _UAPI_LINUX_NFS4_H */ + +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/include/linux/nfs4_mount.h b/include/uapi/linux/nfs4_mount.h index a0dcf665565..a0dcf665565 100644 --- a/include/linux/nfs4_mount.h +++ b/include/uapi/linux/nfs4_mount.h diff --git a/include/uapi/linux/nfs_fs.h b/include/uapi/linux/nfs_fs.h new file mode 100644 index 00000000000..49142287999 --- /dev/null +++ b/include/uapi/linux/nfs_fs.h @@ -0,0 +1,61 @@ +/* + * linux/include/linux/nfs_fs.h + * + * Copyright (C) 1992 Rick Sladkey + * + * OS-specific nfs filesystem definitions and declarations + */ + +#ifndef _UAPI_LINUX_NFS_FS_H +#define _UAPI_LINUX_NFS_FS_H + +#include <linux/magic.h> + +/* Default timeout values */ +#define NFS_DEF_UDP_TIMEO (11) +#define NFS_DEF_UDP_RETRANS (3) +#define NFS_DEF_TCP_TIMEO (600) +#define NFS_DEF_TCP_RETRANS (2) + +#define NFS_MAX_UDP_TIMEOUT (60*HZ) +#define NFS_MAX_TCP_TIMEOUT (600*HZ) + +#define NFS_DEF_ACREGMIN (3) +#define NFS_DEF_ACREGMAX (60) +#define NFS_DEF_ACDIRMIN (30) +#define NFS_DEF_ACDIRMAX (60) + +/* + * When flushing a cluster of dirty pages, there can be different + * strategies: + */ +#define FLUSH_SYNC 1 /* file being synced, or contention */ +#define FLUSH_STABLE 4 /* commit to stable storage */ +#define FLUSH_LOWPRI 8 /* low priority background flush */ +#define FLUSH_HIGHPRI 16 /* high priority memory reclaim flush */ +#define FLUSH_COND_STABLE 32 /* conditional stable write - only stable + * if everything fits in one RPC */ + + +/* + * NFS debug flags + */ +#define NFSDBG_VFS 0x0001 +#define NFSDBG_DIRCACHE 0x0002 +#define NFSDBG_LOOKUPCACHE 0x0004 +#define NFSDBG_PAGECACHE 0x0008 +#define NFSDBG_PROC 0x0010 +#define NFSDBG_XDR 0x0020 +#define NFSDBG_FILE 0x0040 +#define NFSDBG_ROOT 0x0080 +#define NFSDBG_CALLBACK 0x0100 +#define NFSDBG_CLIENT 0x0200 +#define NFSDBG_MOUNT 0x0400 +#define NFSDBG_FSCACHE 0x0800 +#define NFSDBG_PNFS 0x1000 +#define NFSDBG_PNFS_LD 0x2000 +#define NFSDBG_STATE 0x4000 +#define NFSDBG_ALL 0xFFFF + + +#endif /* _UAPI_LINUX_NFS_FS_H */ diff --git a/include/uapi/linux/nfs_idmap.h b/include/uapi/linux/nfs_idmap.h new file mode 100644 index 00000000000..8d4b1c7b24d --- /dev/null +++ b/include/uapi/linux/nfs_idmap.h @@ -0,0 +1,65 @@ +/* + * include/linux/nfs_idmap.h + * + * UID and GID to name mapping for clients. + * + * Copyright (c) 2002 The Regents of the University of Michigan. + * All rights reserved. + * + * Marius Aamodt Eriksen <marius@umich.edu> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the University nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _UAPINFS_IDMAP_H +#define _UAPINFS_IDMAP_H + +#include <linux/types.h> + +/* XXX from bits/utmp.h */ +#define IDMAP_NAMESZ 128 + +#define IDMAP_TYPE_USER 0 +#define IDMAP_TYPE_GROUP 1 + +#define IDMAP_CONV_IDTONAME 0 +#define IDMAP_CONV_NAMETOID 1 + +#define IDMAP_STATUS_INVALIDMSG 0x01 +#define IDMAP_STATUS_AGAIN 0x02 +#define IDMAP_STATUS_LOOKUPFAIL 0x04 +#define IDMAP_STATUS_SUCCESS 0x08 + +struct idmap_msg { + __u8 im_type; + __u8 im_conv; + char im_name[IDMAP_NAMESZ]; + __u32 im_id; + __u8 im_status; +}; + + +#endif /* _UAPINFS_IDMAP_H */ diff --git a/include/linux/nfs_mount.h b/include/uapi/linux/nfs_mount.h index 576bddd72e0..576bddd72e0 100644 --- a/include/linux/nfs_mount.h +++ b/include/uapi/linux/nfs_mount.h diff --git a/include/uapi/linux/nfsacl.h b/include/uapi/linux/nfsacl.h new file mode 100644 index 00000000000..9bb9771a107 --- /dev/null +++ b/include/uapi/linux/nfsacl.h @@ -0,0 +1,29 @@ +/* + * File: linux/nfsacl.h + * + * (C) 2003 Andreas Gruenbacher <agruen@suse.de> + */ +#ifndef _UAPI__LINUX_NFSACL_H +#define _UAPI__LINUX_NFSACL_H + +#define NFS_ACL_PROGRAM 100227 + +#define ACLPROC2_GETACL 1 +#define ACLPROC2_SETACL 2 +#define ACLPROC2_GETATTR 3 +#define ACLPROC2_ACCESS 4 + +#define ACLPROC3_GETACL 1 +#define ACLPROC3_SETACL 2 + + +/* Flags for the getacl/setacl mode */ +#define NFS_ACL 0x0001 +#define NFS_ACLCNT 0x0002 +#define NFS_DFACL 0x0004 +#define NFS_DFACLCNT 0x0008 + +/* Flag for Default ACL entries */ +#define NFS_ACL_DEFAULT 0x1000 + +#endif /* _UAPI__LINUX_NFSACL_H */ diff --git a/include/uapi/linux/nfsd/Kbuild b/include/uapi/linux/nfsd/Kbuild index aafaa5aa54d..c11bc404053 100644 --- a/include/uapi/linux/nfsd/Kbuild +++ b/include/uapi/linux/nfsd/Kbuild @@ -1 +1,6 @@ # UAPI Header export list +header-y += cld.h +header-y += debug.h +header-y += export.h +header-y += nfsfh.h +header-y += stats.h diff --git a/include/linux/nfsd/cld.h b/include/uapi/linux/nfsd/cld.h index f14a9ab06f1..f14a9ab06f1 100644 --- a/include/linux/nfsd/cld.h +++ b/include/uapi/linux/nfsd/cld.h diff --git a/include/uapi/linux/nfsd/debug.h b/include/uapi/linux/nfsd/debug.h new file mode 100644 index 00000000000..a6f453c740b --- /dev/null +++ b/include/uapi/linux/nfsd/debug.h @@ -0,0 +1,40 @@ +/* + * linux/include/linux/nfsd/debug.h + * + * Debugging-related stuff for nfsd + * + * Copyright (C) 1995 Olaf Kirch <okir@monad.swb.de> + */ + +#ifndef _UAPILINUX_NFSD_DEBUG_H +#define _UAPILINUX_NFSD_DEBUG_H + +#include <linux/sunrpc/debug.h> + +/* + * Enable debugging for nfsd. + * Requires RPC_DEBUG. + */ +#ifdef RPC_DEBUG +# define NFSD_DEBUG 1 +#endif + +/* + * knfsd debug flags + */ +#define NFSDDBG_SOCK 0x0001 +#define NFSDDBG_FH 0x0002 +#define NFSDDBG_EXPORT 0x0004 +#define NFSDDBG_SVC 0x0008 +#define NFSDDBG_PROC 0x0010 +#define NFSDDBG_FILEOP 0x0020 +#define NFSDDBG_AUTH 0x0040 +#define NFSDDBG_REPCACHE 0x0080 +#define NFSDDBG_XDR 0x0100 +#define NFSDDBG_LOCKD 0x0200 +#define NFSDDBG_ALL 0x7FFF +#define NFSDDBG_NOCHANGE 0xFFFF + + + +#endif /* _UAPILINUX_NFSD_DEBUG_H */ diff --git a/include/uapi/linux/nfsd/export.h b/include/uapi/linux/nfsd/export.h new file mode 100644 index 00000000000..cf47c313794 --- /dev/null +++ b/include/uapi/linux/nfsd/export.h @@ -0,0 +1,58 @@ +/* + * include/linux/nfsd/export.h + * + * Public declarations for NFS exports. The definitions for the + * syscall interface are in nfsctl.h + * + * Copyright (C) 1995-1997 Olaf Kirch <okir@monad.swb.de> + */ + +#ifndef _UAPINFSD_EXPORT_H +#define _UAPINFSD_EXPORT_H + +# include <linux/types.h> + +/* + * Important limits for the exports stuff. + */ +#define NFSCLNT_IDMAX 1024 +#define NFSCLNT_ADDRMAX 16 +#define NFSCLNT_KEYMAX 32 + +/* + * Export flags. + */ +#define NFSEXP_READONLY 0x0001 +#define NFSEXP_INSECURE_PORT 0x0002 +#define NFSEXP_ROOTSQUASH 0x0004 +#define NFSEXP_ALLSQUASH 0x0008 +#define NFSEXP_ASYNC 0x0010 +#define NFSEXP_GATHERED_WRITES 0x0020 +/* 40 80 100 currently unused */ +#define NFSEXP_NOHIDE 0x0200 +#define NFSEXP_NOSUBTREECHECK 0x0400 +#define NFSEXP_NOAUTHNLM 0x0800 /* Don't authenticate NLM requests - just trust */ +#define NFSEXP_MSNFS 0x1000 /* do silly things that MS clients expect; no longer supported */ +#define NFSEXP_FSID 0x2000 +#define NFSEXP_CROSSMOUNT 0x4000 +#define NFSEXP_NOACL 0x8000 /* reserved for possible ACL related use */ +/* + * The NFSEXP_V4ROOT flag causes the kernel to give access only to NFSv4 + * clients, and only to the single directory that is the root of the + * export; further lookup and readdir operations are treated as if every + * subdirectory was a mountpoint, and ignored if they are not themselves + * exported. This is used by nfsd and mountd to construct the NFSv4 + * pseudofilesystem, which provides access only to paths leading to each + * exported filesystem. + */ +#define NFSEXP_V4ROOT 0x10000 +/* All flags that we claim to support. (Note we don't support NOACL.) */ +#define NFSEXP_ALLFLAGS 0x17E3F + +/* The flags that may vary depending on security flavor: */ +#define NFSEXP_SECINFO_FLAGS (NFSEXP_READONLY | NFSEXP_ROOTSQUASH \ + | NFSEXP_ALLSQUASH \ + | NFSEXP_INSECURE_PORT) + + +#endif /* _UAPINFSD_EXPORT_H */ diff --git a/include/uapi/linux/nfsd/nfsfh.h b/include/uapi/linux/nfsd/nfsfh.h new file mode 100644 index 00000000000..616e3b39647 --- /dev/null +++ b/include/uapi/linux/nfsd/nfsfh.h @@ -0,0 +1,122 @@ +/* + * include/linux/nfsd/nfsfh.h + * + * This file describes the layout of the file handles as passed + * over the wire. + * + * Earlier versions of knfsd used to sign file handles using keyed MD5 + * or SHA. I've removed this code, because it doesn't give you more + * security than blocking external access to port 2049 on your firewall. + * + * Copyright (C) 1995, 1996, 1997 Olaf Kirch <okir@monad.swb.de> + */ + +#ifndef _UAPI_LINUX_NFSD_FH_H +#define _UAPI_LINUX_NFSD_FH_H + +#include <linux/types.h> +#include <linux/nfs.h> +#include <linux/nfs2.h> +#include <linux/nfs3.h> +#include <linux/nfs4.h> + +/* + * This is the old "dentry style" Linux NFSv2 file handle. + * + * The xino and xdev fields are currently used to transport the + * ino/dev of the exported inode. + */ +struct nfs_fhbase_old { + __u32 fb_dcookie; /* dentry cookie - always 0xfeebbaca */ + __u32 fb_ino; /* our inode number */ + __u32 fb_dirino; /* dir inode number, 0 for directories */ + __u32 fb_dev; /* our device */ + __u32 fb_xdev; + __u32 fb_xino; + __u32 fb_generation; +}; + +/* + * This is the new flexible, extensible style NFSv2/v3 file handle. + * by Neil Brown <neilb@cse.unsw.edu.au> - March 2000 + * + * The file handle starts with a sequence of four-byte words. + * The first word contains a version number (1) and three descriptor bytes + * that tell how the remaining 3 variable length fields should be handled. + * These three bytes are auth_type, fsid_type and fileid_type. + * + * All four-byte values are in host-byte-order. + * + * The auth_type field specifies how the filehandle can be authenticated + * This might allow a file to be confirmed to be in a writable part of a + * filetree without checking the path from it up to the root. + * Current values: + * 0 - No authentication. fb_auth is 0 bytes long + * Possible future values: + * 1 - 4 bytes taken from MD5 hash of the remainer of the file handle + * prefixed by a secret and with the important export flags. + * + * The fsid_type identifies how the filesystem (or export point) is + * encoded. + * Current values: + * 0 - 4 byte device id (ms-2-bytes major, ls-2-bytes minor), 4byte inode number + * NOTE: we cannot use the kdev_t device id value, because kdev_t.h + * says we mustn't. We must break it up and reassemble. + * 1 - 4 byte user specified identifier + * 2 - 4 byte major, 4 byte minor, 4 byte inode number - DEPRECATED + * 3 - 4 byte device id, encoded for user-space, 4 byte inode number + * 4 - 4 byte inode number and 4 byte uuid + * 5 - 8 byte uuid + * 6 - 16 byte uuid + * 7 - 8 byte inode number and 16 byte uuid + * + * The fileid_type identified how the file within the filesystem is encoded. + * This is (will be) passed to, and set by, the underlying filesystem if it supports + * filehandle operations. The filesystem must not use the value '0' or '0xff' and may + * only use the values 1 and 2 as defined below: + * Current values: + * 0 - The root, or export point, of the filesystem. fb_fileid is 0 bytes. + * 1 - 32bit inode number, 32 bit generation number. + * 2 - 32bit inode number, 32 bit generation number, 32 bit parent directory inode number. + * + */ +struct nfs_fhbase_new { + __u8 fb_version; /* == 1, even => nfs_fhbase_old */ + __u8 fb_auth_type; + __u8 fb_fsid_type; + __u8 fb_fileid_type; + __u32 fb_auth[1]; +/* __u32 fb_fsid[0]; floating */ +/* __u32 fb_fileid[0]; floating */ +}; + +struct knfsd_fh { + unsigned int fh_size; /* significant for NFSv3. + * Points to the current size while building + * a new file handle + */ + union { + struct nfs_fhbase_old fh_old; + __u32 fh_pad[NFS4_FHSIZE/4]; + struct nfs_fhbase_new fh_new; + } fh_base; +}; + +#define ofh_dcookie fh_base.fh_old.fb_dcookie +#define ofh_ino fh_base.fh_old.fb_ino +#define ofh_dirino fh_base.fh_old.fb_dirino +#define ofh_dev fh_base.fh_old.fb_dev +#define ofh_xdev fh_base.fh_old.fb_xdev +#define ofh_xino fh_base.fh_old.fb_xino +#define ofh_generation fh_base.fh_old.fb_generation + +#define fh_version fh_base.fh_new.fb_version +#define fh_fsid_type fh_base.fh_new.fb_fsid_type +#define fh_auth_type fh_base.fh_new.fb_auth_type +#define fh_fileid_type fh_base.fh_new.fb_fileid_type +#define fh_auth fh_base.fh_new.fb_auth +#define fh_fsid fh_base.fh_new.fb_auth + + + +#endif /* _UAPI_LINUX_NFSD_FH_H */ diff --git a/include/uapi/linux/nfsd/stats.h b/include/uapi/linux/nfsd/stats.h new file mode 100644 index 00000000000..9fb7a064426 --- /dev/null +++ b/include/uapi/linux/nfsd/stats.h @@ -0,0 +1,17 @@ +/* + * linux/include/linux/nfsd/stats.h + * + * Statistics for NFS server. + * + * Copyright (C) 1995, 1996 Olaf Kirch <okir@monad.swb.de> + */ + +#ifndef _UAPILINUX_NFSD_STATS_H +#define _UAPILINUX_NFSD_STATS_H + +#include <linux/nfs4.h> + +/* thread usage wraps very million seconds (approx one fortnight) */ +#define NFSD_USAGE_WRAP (HZ*1000000) + +#endif /* _UAPILINUX_NFSD_STATS_H */ diff --git a/include/linux/nl80211.h b/include/uapi/linux/nl80211.h index 7df9b500c80..7df9b500c80 100644 --- a/include/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h diff --git a/include/uapi/linux/nubus.h b/include/uapi/linux/nubus.h new file mode 100644 index 00000000000..77513d2b563 --- /dev/null +++ b/include/uapi/linux/nubus.h @@ -0,0 +1,244 @@ +/* + nubus.h: various definitions and prototypes for NuBus drivers to use. + + Originally written by Alan Cox. + + Hacked to death by C. Scott Ananian and David Huggins-Daines. + + Some of the constants in here are from the corresponding + NetBSD/OpenBSD header file, by Allen Briggs. We figured out the + rest of them on our own. */ + +#ifndef _UAPILINUX_NUBUS_H +#define _UAPILINUX_NUBUS_H + +#include <linux/types.h> + +enum nubus_category { + NUBUS_CAT_BOARD = 0x0001, + NUBUS_CAT_DISPLAY = 0x0003, + NUBUS_CAT_NETWORK = 0x0004, + NUBUS_CAT_COMMUNICATIONS = 0x0006, + NUBUS_CAT_FONT = 0x0009, + NUBUS_CAT_CPU = 0x000A, + /* For lack of a better name */ + NUBUS_CAT_DUODOCK = 0x0020 +}; + +enum nubus_type_network { + NUBUS_TYPE_ETHERNET = 0x0001, + NUBUS_TYPE_RS232 = 0x0002 +}; + +enum nubus_type_display { + NUBUS_TYPE_VIDEO = 0x0001 +}; + +enum nubus_type_cpu { + NUBUS_TYPE_68020 = 0x0003, + NUBUS_TYPE_68030 = 0x0004, + NUBUS_TYPE_68040 = 0x0005 +}; + +/* Known <Cat,Type,SW,HW> tuples: (according to TattleTech and Slots) + * 68030 motherboards: <10,4,0,24> + * 68040 motherboards: <10,5,0,24> + * DuoDock Plus: <32,1,1,2> + * + * Toby Frame Buffer card: <3,1,1,1> + * RBV built-in video (IIci): <3,1,1,24> + * Valkyrie built-in video (Q630): <3,1,1,46> + * Macintosh Display Card: <3,1,1,25> + * Sonora built-in video (P460): <3,1,1,34> + * Jet framebuffer (DuoDock Plus): <3,1,1,41> + * + * SONIC comm-slot/on-board and DuoDock Ethernet: <4,1,1,272> + * SONIC LC-PDS Ethernet (Dayna, but like Apple 16-bit, sort of): <4,1,1,271> + * Apple SONIC LC-PDS Ethernet ("Apple Ethernet LC Twisted-Pair Card"): <4,1,0,281> + * Sonic Systems Ethernet A-Series Card: <4,1,268,256> + * Asante MacCon NuBus-A: <4,1,260,256> (alpha-1.0,1.1 revision) + * ROM on the above card: <2,1,0,0> + * Cabletron ethernet card: <4,1,1,265> + * Farallon ethernet card: <4,1,268,256> (identical to Sonic Systems card) + * Kinetics EtherPort IIN: <4,1,259,262> + * API Engineering EtherRun_LCa PDS enet card: <4,1,282,256> + * + * Add your devices to the list! You can obtain the "Slots" utility + * from Apple's FTP site at: + * ftp://dev.apple.com/devworld/Tool_Chest/Devices_-_Hardware/NuBus_Slot_Manager/ + * + * Alternately, TattleTech can be found at any Info-Mac mirror site. + * or from its distribution site: ftp://ftp.decismkr.com/dms + */ + +/* DrSW: Uniquely identifies the software interface to a board. This + is usually the one you want to look at when writing a driver. It's + not as useful as you think, though, because as we should know by + now (duh), "Apple Compatible" can mean a lot of things... */ + +/* Add known DrSW values here */ +enum nubus_drsw { + /* NUBUS_CAT_DISPLAY */ + NUBUS_DRSW_APPLE = 0x0001, + NUBUS_DRSW_APPLE_HIRES = 0x0013, /* MacII HiRes card driver */ + + /* NUBUS_CAT_NETWORK */ + NUBUS_DRSW_3COM = 0x0000, + NUBUS_DRSW_CABLETRON = 0x0001, + NUBUS_DRSW_SONIC_LC = 0x0001, + NUBUS_DRSW_KINETICS = 0x0103, + NUBUS_DRSW_ASANTE = 0x0104, + NUBUS_DRSW_TECHWORKS = 0x0109, + NUBUS_DRSW_DAYNA = 0x010b, + NUBUS_DRSW_FARALLON = 0x010c, + NUBUS_DRSW_APPLE_SN = 0x010f, + NUBUS_DRSW_DAYNA2 = 0x0115, + NUBUS_DRSW_FOCUS = 0x011a, + NUBUS_DRSW_ASANTE_CS = 0x011d, /* use asante SMC9194 driver */ + NUBUS_DRSW_DAYNA_LC = 0x011e, + + /* NUBUS_CAT_CPU */ + NUBUS_DRSW_NONE = 0x0000, +}; + +/* DrHW: Uniquely identifies the hardware interface to a board (or at + least, it should... some video cards are known to incorrectly + identify themselves as Toby cards) */ + +/* Add known DrHW values here */ +enum nubus_drhw { + /* NUBUS_CAT_DISPLAY */ + NUBUS_DRHW_APPLE_TFB = 0x0001, /* Toby frame buffer card */ + NUBUS_DRHW_APPLE_WVC = 0x0006, /* Apple Workstation Video Card */ + NUBUS_DRHW_SIGMA_CLRMAX = 0x0007, /* Sigma Design ColorMax */ + NUBUS_DRHW_APPLE_SE30 = 0x0009, /* Apple SE/30 video */ + NUBUS_DRHW_APPLE_HRVC = 0x0013, /* Mac II High-Res Video Card */ + NUBUS_DRHW_APPLE_PVC = 0x0017, /* Mac II Portrait Video Card */ + NUBUS_DRHW_APPLE_RBV1 = 0x0018, /* IIci RBV video */ + NUBUS_DRHW_APPLE_MDC = 0x0019, /* Macintosh Display Card */ + NUBUS_DRHW_APPLE_SONORA = 0x0022, /* Sonora built-in video */ + NUBUS_DRHW_APPLE_24AC = 0x002b, /* Mac 24AC Video Card */ + NUBUS_DRHW_APPLE_VALKYRIE = 0x002e, + NUBUS_DRHW_APPLE_JET = 0x0029, /* Jet framebuffer (DuoDock) */ + NUBUS_DRHW_SMAC_GFX = 0x0105, /* SuperMac GFX */ + NUBUS_DRHW_RASTER_CB264 = 0x013B, /* RasterOps ColorBoard 264 */ + NUBUS_DRHW_MICRON_XCEED = 0x0146, /* Micron Exceed color */ + NUBUS_DRHW_RDIUS_GSC = 0x0153, /* Radius GS/C */ + NUBUS_DRHW_SMAC_SPEC8 = 0x017B, /* SuperMac Spectrum/8 */ + NUBUS_DRHW_SMAC_SPEC24 = 0x017C, /* SuperMac Spectrum/24 */ + NUBUS_DRHW_RASTER_CB364 = 0x026F, /* RasterOps ColorBoard 364 */ + NUBUS_DRHW_RDIUS_DCGX = 0x027C, /* Radius DirectColor/GX */ + NUBUS_DRHW_RDIUS_PC8 = 0x0291, /* Radius PrecisionColor 8 */ + NUBUS_DRHW_LAPIS_PCS8 = 0x0292, /* Lapis ProColorServer 8 */ + NUBUS_DRHW_RASTER_24XLI = 0x02A0, /* RasterOps 8/24 XLi */ + NUBUS_DRHW_RASTER_PBPGT = 0x02A5, /* RasterOps PaintBoard Prism GT */ + NUBUS_DRHW_EMACH_FSX = 0x02AE, /* E-Machines Futura SX */ + NUBUS_DRHW_RASTER_24XLTV = 0x02B7, /* RasterOps 24XLTV */ + NUBUS_DRHW_SMAC_THUND24 = 0x02CB, /* SuperMac Thunder/24 */ + NUBUS_DRHW_SMAC_THUNDLGHT = 0x03D9, /* SuperMac ThunderLight */ + NUBUS_DRHW_RDIUS_PC24XP = 0x0406, /* Radius PrecisionColor 24Xp */ + NUBUS_DRHW_RDIUS_PC24X = 0x040A, /* Radius PrecisionColor 24X */ + NUBUS_DRHW_RDIUS_PC8XJ = 0x040B, /* Radius PrecisionColor 8XJ */ + + /* NUBUS_CAT_NETWORK */ + NUBUS_DRHW_INTERLAN = 0x0100, + NUBUS_DRHW_SMC9194 = 0x0101, + NUBUS_DRHW_KINETICS = 0x0106, + NUBUS_DRHW_CABLETRON = 0x0109, + NUBUS_DRHW_ASANTE_LC = 0x010f, + NUBUS_DRHW_SONIC = 0x0110, + NUBUS_DRHW_TECHWORKS = 0x0112, + NUBUS_DRHW_APPLE_SONIC_NB = 0x0118, + NUBUS_DRHW_APPLE_SONIC_LC = 0x0119, + NUBUS_DRHW_FOCUS = 0x011c, + NUBUS_DRHW_SONNET = 0x011d, +}; + +/* Resource IDs: These are the identifiers for the various weird and + wonderful tidbits of information that may or may not reside in the + NuBus ROM directory. */ +enum nubus_res_id { + NUBUS_RESID_TYPE = 0x0001, + NUBUS_RESID_NAME = 0x0002, + NUBUS_RESID_ICON = 0x0003, + NUBUS_RESID_DRVRDIR = 0x0004, + NUBUS_RESID_LOADREC = 0x0005, + NUBUS_RESID_BOOTREC = 0x0006, + NUBUS_RESID_FLAGS = 0x0007, + NUBUS_RESID_HWDEVID = 0x0008, + NUBUS_RESID_MINOR_BASEOS = 0x000a, + NUBUS_RESID_MINOR_LENGTH = 0x000b, + NUBUS_RESID_MAJOR_BASEOS = 0x000c, + NUBUS_RESID_MAJOR_LENGTH = 0x000d, + NUBUS_RESID_CICN = 0x000f, + NUBUS_RESID_ICL8 = 0x0010, + NUBUS_RESID_ICL4 = 0x0011, +}; + +/* Category-specific resources. */ +enum nubus_board_res_id { + NUBUS_RESID_BOARDID = 0x0020, + NUBUS_RESID_PRAMINITDATA = 0x0021, + NUBUS_RESID_PRIMARYINIT = 0x0022, + NUBUS_RESID_TIMEOUTCONST = 0x0023, + NUBUS_RESID_VENDORINFO = 0x0024, + NUBUS_RESID_BOARDFLAGS = 0x0025, + NUBUS_RESID_SECONDINIT = 0x0026, + + /* Not sure why Apple put these next two in here */ + NUBUS_RESID_VIDNAMES = 0x0041, + NUBUS_RESID_VIDMODES = 0x007e +}; + +/* Fields within the vendor info directory */ +enum nubus_vendor_res_id { + NUBUS_RESID_VEND_ID = 0x0001, + NUBUS_RESID_VEND_SERIAL = 0x0002, + NUBUS_RESID_VEND_REV = 0x0003, + NUBUS_RESID_VEND_PART = 0x0004, + NUBUS_RESID_VEND_DATE = 0x0005 +}; + +enum nubus_net_res_id { + NUBUS_RESID_MAC_ADDRESS = 0x0080 +}; + +enum nubus_cpu_res_id { + NUBUS_RESID_MEMINFO = 0x0081, + NUBUS_RESID_ROMINFO = 0x0082 +}; + +enum nubus_display_res_id { + NUBUS_RESID_GAMMADIR = 0x0040, + NUBUS_RESID_FIRSTMODE = 0x0080, + NUBUS_RESID_SECONDMODE = 0x0081, + NUBUS_RESID_THIRDMODE = 0x0082, + NUBUS_RESID_FOURTHMODE = 0x0083, + NUBUS_RESID_FIFTHMODE = 0x0084, + NUBUS_RESID_SIXTHMODE = 0x0085 +}; + +struct nubus_dir +{ + unsigned char *base; + unsigned char *ptr; + int done; + int mask; +}; + +struct nubus_dirent +{ + unsigned char *base; + unsigned char type; + __u32 data; /* Actually 24bits used */ + int mask; +}; + + +/* We'd like to get rid of this eventually. Only daynaport.c uses it now. */ +static inline void *nubus_slot_addr(int slot) +{ + return (void *)(0xF0000000|(slot<<24)); +} + +#endif /* _UAPILINUX_NUBUS_H */ diff --git a/include/uapi/linux/nvram.h b/include/uapi/linux/nvram.h new file mode 100644 index 00000000000..0986c433738 --- /dev/null +++ b/include/uapi/linux/nvram.h @@ -0,0 +1,16 @@ +#ifndef _UAPI_LINUX_NVRAM_H +#define _UAPI_LINUX_NVRAM_H + +#include <linux/ioctl.h> + +/* /dev/nvram ioctls */ +#define NVRAM_INIT _IO('p', 0x40) /* initialize NVRAM and set checksum */ +#define NVRAM_SETCKS _IO('p', 0x41) /* recalculate checksum */ + +/* for all current systems, this is where NVRAM starts */ +#define NVRAM_FIRST_BYTE 14 +/* all these functions expect an NVRAM offset, not an absolute */ +#define NVRAM_OFFSET(x) ((x)-NVRAM_FIRST_BYTE) + + +#endif /* _UAPI_LINUX_NVRAM_H */ diff --git a/include/linux/omap3isp.h b/include/uapi/linux/omap3isp.h index c090cf9249b..c090cf9249b 100644 --- a/include/linux/omap3isp.h +++ b/include/uapi/linux/omap3isp.h diff --git a/include/uapi/linux/omapfb.h b/include/uapi/linux/omapfb.h new file mode 100644 index 00000000000..7c97bc00ac6 --- /dev/null +++ b/include/uapi/linux/omapfb.h @@ -0,0 +1,222 @@ +/* + * File: include/linux/omapfb.h + * + * Framebuffer driver for TI OMAP boards + * + * Copyright (C) 2004 Nokia Corporation + * Author: Imre Deak <imre.deak@nokia.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _UAPI__LINUX_OMAPFB_H__ +#define _UAPI__LINUX_OMAPFB_H__ + +#include <linux/fb.h> +#include <linux/ioctl.h> +#include <linux/types.h> + +/* IOCTL commands. */ + +#define OMAP_IOW(num, dtype) _IOW('O', num, dtype) +#define OMAP_IOR(num, dtype) _IOR('O', num, dtype) +#define OMAP_IOWR(num, dtype) _IOWR('O', num, dtype) +#define OMAP_IO(num) _IO('O', num) + +#define OMAPFB_MIRROR OMAP_IOW(31, int) +#define OMAPFB_SYNC_GFX OMAP_IO(37) +#define OMAPFB_VSYNC OMAP_IO(38) +#define OMAPFB_SET_UPDATE_MODE OMAP_IOW(40, int) +#define OMAPFB_GET_CAPS OMAP_IOR(42, struct omapfb_caps) +#define OMAPFB_GET_UPDATE_MODE OMAP_IOW(43, int) +#define OMAPFB_LCD_TEST OMAP_IOW(45, int) +#define OMAPFB_CTRL_TEST OMAP_IOW(46, int) +#define OMAPFB_UPDATE_WINDOW_OLD OMAP_IOW(47, struct omapfb_update_window_old) +#define OMAPFB_SET_COLOR_KEY OMAP_IOW(50, struct omapfb_color_key) +#define OMAPFB_GET_COLOR_KEY OMAP_IOW(51, struct omapfb_color_key) +#define OMAPFB_SETUP_PLANE OMAP_IOW(52, struct omapfb_plane_info) +#define OMAPFB_QUERY_PLANE OMAP_IOW(53, struct omapfb_plane_info) +#define OMAPFB_UPDATE_WINDOW OMAP_IOW(54, struct omapfb_update_window) +#define OMAPFB_SETUP_MEM OMAP_IOW(55, struct omapfb_mem_info) +#define OMAPFB_QUERY_MEM OMAP_IOW(56, struct omapfb_mem_info) +#define OMAPFB_WAITFORVSYNC OMAP_IO(57) +#define OMAPFB_MEMORY_READ OMAP_IOR(58, struct omapfb_memory_read) +#define OMAPFB_GET_OVERLAY_COLORMODE OMAP_IOR(59, struct omapfb_ovl_colormode) +#define OMAPFB_WAITFORGO OMAP_IO(60) +#define OMAPFB_GET_VRAM_INFO OMAP_IOR(61, struct omapfb_vram_info) +#define OMAPFB_SET_TEARSYNC OMAP_IOW(62, struct omapfb_tearsync_info) +#define OMAPFB_GET_DISPLAY_INFO OMAP_IOR(63, struct omapfb_display_info) + +#define OMAPFB_CAPS_GENERIC_MASK 0x00000fff +#define OMAPFB_CAPS_LCDC_MASK 0x00fff000 +#define OMAPFB_CAPS_PANEL_MASK 0xff000000 + +#define OMAPFB_CAPS_MANUAL_UPDATE 0x00001000 +#define OMAPFB_CAPS_TEARSYNC 0x00002000 +#define OMAPFB_CAPS_PLANE_RELOCATE_MEM 0x00004000 +#define OMAPFB_CAPS_PLANE_SCALE 0x00008000 +#define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE 0x00010000 +#define OMAPFB_CAPS_WINDOW_SCALE 0x00020000 +#define OMAPFB_CAPS_WINDOW_OVERLAY 0x00040000 +#define OMAPFB_CAPS_WINDOW_ROTATE 0x00080000 +#define OMAPFB_CAPS_SET_BACKLIGHT 0x01000000 + +/* Values from DSP must map to lower 16-bits */ +#define OMAPFB_FORMAT_MASK 0x00ff +#define OMAPFB_FORMAT_FLAG_DOUBLE 0x0100 +#define OMAPFB_FORMAT_FLAG_TEARSYNC 0x0200 +#define OMAPFB_FORMAT_FLAG_FORCE_VSYNC 0x0400 +#define OMAPFB_FORMAT_FLAG_ENABLE_OVERLAY 0x0800 +#define OMAPFB_FORMAT_FLAG_DISABLE_OVERLAY 0x1000 + +#define OMAPFB_MEMTYPE_SDRAM 0 +#define OMAPFB_MEMTYPE_SRAM 1 +#define OMAPFB_MEMTYPE_MAX 1 + +#define OMAPFB_MEM_IDX_ENABLED 0x80 +#define OMAPFB_MEM_IDX_MASK 0x7f + +enum omapfb_color_format { + OMAPFB_COLOR_RGB565 = 0, + OMAPFB_COLOR_YUV422, + OMAPFB_COLOR_YUV420, + OMAPFB_COLOR_CLUT_8BPP, + OMAPFB_COLOR_CLUT_4BPP, + OMAPFB_COLOR_CLUT_2BPP, + OMAPFB_COLOR_CLUT_1BPP, + OMAPFB_COLOR_RGB444, + OMAPFB_COLOR_YUY422, + + OMAPFB_COLOR_ARGB16, + OMAPFB_COLOR_RGB24U, /* RGB24, 32-bit container */ + OMAPFB_COLOR_RGB24P, /* RGB24, 24-bit container */ + OMAPFB_COLOR_ARGB32, + OMAPFB_COLOR_RGBA32, + OMAPFB_COLOR_RGBX32, +}; + +struct omapfb_update_window { + __u32 x, y; + __u32 width, height; + __u32 format; + __u32 out_x, out_y; + __u32 out_width, out_height; + __u32 reserved[8]; +}; + +struct omapfb_update_window_old { + __u32 x, y; + __u32 width, height; + __u32 format; +}; + +enum omapfb_plane { + OMAPFB_PLANE_GFX = 0, + OMAPFB_PLANE_VID1, + OMAPFB_PLANE_VID2, +}; + +enum omapfb_channel_out { + OMAPFB_CHANNEL_OUT_LCD = 0, + OMAPFB_CHANNEL_OUT_DIGIT, +}; + +struct omapfb_plane_info { + __u32 pos_x; + __u32 pos_y; + __u8 enabled; + __u8 channel_out; + __u8 mirror; + __u8 mem_idx; + __u32 out_width; + __u32 out_height; + __u32 reserved2[12]; +}; + +struct omapfb_mem_info { + __u32 size; + __u8 type; + __u8 reserved[3]; +}; + +struct omapfb_caps { + __u32 ctrl; + __u32 plane_color; + __u32 wnd_color; +}; + +enum omapfb_color_key_type { + OMAPFB_COLOR_KEY_DISABLED = 0, + OMAPFB_COLOR_KEY_GFX_DST, + OMAPFB_COLOR_KEY_VID_SRC, +}; + +struct omapfb_color_key { + __u8 channel_out; + __u32 background; + __u32 trans_key; + __u8 key_type; +}; + +enum omapfb_update_mode { + OMAPFB_UPDATE_DISABLED = 0, + OMAPFB_AUTO_UPDATE, + OMAPFB_MANUAL_UPDATE +}; + +struct omapfb_memory_read { + __u16 x; + __u16 y; + __u16 w; + __u16 h; + size_t buffer_size; + void __user *buffer; +}; + +struct omapfb_ovl_colormode { + __u8 overlay_idx; + __u8 mode_idx; + __u32 bits_per_pixel; + __u32 nonstd; + struct fb_bitfield red; + struct fb_bitfield green; + struct fb_bitfield blue; + struct fb_bitfield transp; +}; + +struct omapfb_vram_info { + __u32 total; + __u32 free; + __u32 largest_free_block; + __u32 reserved[5]; +}; + +struct omapfb_tearsync_info { + __u8 enabled; + __u8 reserved1[3]; + __u16 line; + __u16 reserved2; +}; + +struct omapfb_display_info { + __u16 xres; + __u16 yres; + __u32 width; /* phys width of the display in micrometers */ + __u32 height; /* phys height of the display in micrometers */ + __u32 reserved[5]; +}; + + +#endif /* _UAPI__LINUX_OMAPFB_H__ */ diff --git a/include/uapi/linux/oom.h b/include/uapi/linux/oom.h new file mode 100644 index 00000000000..a49c4afc706 --- /dev/null +++ b/include/uapi/linux/oom.h @@ -0,0 +1,11 @@ +#ifndef _UAPI__INCLUDE_LINUX_OOM_H +#define _UAPI__INCLUDE_LINUX_OOM_H + +/* + * /proc/<pid>/oom_score_adj set to OOM_SCORE_ADJ_MIN disables oom killing for + * pid. + */ +#define OOM_SCORE_ADJ_MIN (-1000) +#define OOM_SCORE_ADJ_MAX 1000 + +#endif /* _UAPI__INCLUDE_LINUX_OOM_H */ diff --git a/include/linux/packet_diag.h b/include/uapi/linux/packet_diag.h index 93f5fa94a43..93f5fa94a43 100644 --- a/include/linux/packet_diag.h +++ b/include/uapi/linux/packet_diag.h diff --git a/include/linux/param.h b/include/uapi/linux/param.h index 092e92f67b5..092e92f67b5 100644 --- a/include/linux/param.h +++ b/include/uapi/linux/param.h diff --git a/include/uapi/linux/parport.h b/include/uapi/linux/parport.h new file mode 100644 index 00000000000..f41388f88dc --- /dev/null +++ b/include/uapi/linux/parport.h @@ -0,0 +1,95 @@ +/* + * Any part of this program may be used in documents licensed under + * the GNU Free Documentation License, Version 1.1 or any later version + * published by the Free Software Foundation. + */ + +#ifndef _UAPI_PARPORT_H_ +#define _UAPI_PARPORT_H_ + +/* Start off with user-visible constants */ + +/* Maximum of 16 ports per machine */ +#define PARPORT_MAX 16 + +/* Magic numbers */ +#define PARPORT_IRQ_NONE -1 +#define PARPORT_DMA_NONE -1 +#define PARPORT_IRQ_AUTO -2 +#define PARPORT_DMA_AUTO -2 +#define PARPORT_DMA_NOFIFO -3 +#define PARPORT_DISABLE -2 +#define PARPORT_IRQ_PROBEONLY -3 +#define PARPORT_IOHI_AUTO -1 + +#define PARPORT_CONTROL_STROBE 0x1 +#define PARPORT_CONTROL_AUTOFD 0x2 +#define PARPORT_CONTROL_INIT 0x4 +#define PARPORT_CONTROL_SELECT 0x8 + +#define PARPORT_STATUS_ERROR 0x8 +#define PARPORT_STATUS_SELECT 0x10 +#define PARPORT_STATUS_PAPEROUT 0x20 +#define PARPORT_STATUS_ACK 0x40 +#define PARPORT_STATUS_BUSY 0x80 + +/* Type classes for Plug-and-Play probe. */ +typedef enum { + PARPORT_CLASS_LEGACY = 0, /* Non-IEEE1284 device */ + PARPORT_CLASS_PRINTER, + PARPORT_CLASS_MODEM, + PARPORT_CLASS_NET, + PARPORT_CLASS_HDC, /* Hard disk controller */ + PARPORT_CLASS_PCMCIA, + PARPORT_CLASS_MEDIA, /* Multimedia device */ + PARPORT_CLASS_FDC, /* Floppy disk controller */ + PARPORT_CLASS_PORTS, + PARPORT_CLASS_SCANNER, + PARPORT_CLASS_DIGCAM, + PARPORT_CLASS_OTHER, /* Anything else */ + PARPORT_CLASS_UNSPEC, /* No CLS field in ID */ + PARPORT_CLASS_SCSIADAPTER +} parport_device_class; + +/* The "modes" entry in parport is a bit field representing the + capabilities of the hardware. */ +#define PARPORT_MODE_PCSPP (1<<0) /* IBM PC registers available. */ +#define PARPORT_MODE_TRISTATE (1<<1) /* Can tristate. */ +#define PARPORT_MODE_EPP (1<<2) /* Hardware EPP. */ +#define PARPORT_MODE_ECP (1<<3) /* Hardware ECP. */ +#define PARPORT_MODE_COMPAT (1<<4) /* Hardware 'printer protocol'. */ +#define PARPORT_MODE_DMA (1<<5) /* Hardware can DMA. */ +#define PARPORT_MODE_SAFEININT (1<<6) /* SPP registers accessible in IRQ. */ + +/* IEEE1284 modes: + Nibble mode, byte mode, ECP, ECPRLE and EPP are their own + 'extensibility request' values. Others are special. + 'Real' ECP modes must have the IEEE1284_MODE_ECP bit set. */ +#define IEEE1284_MODE_NIBBLE 0 +#define IEEE1284_MODE_BYTE (1<<0) +#define IEEE1284_MODE_COMPAT (1<<8) +#define IEEE1284_MODE_BECP (1<<9) /* Bounded ECP mode */ +#define IEEE1284_MODE_ECP (1<<4) +#define IEEE1284_MODE_ECPRLE (IEEE1284_MODE_ECP | (1<<5)) +#define IEEE1284_MODE_ECPSWE (1<<10) /* Software-emulated */ +#define IEEE1284_MODE_EPP (1<<6) +#define IEEE1284_MODE_EPPSL (1<<11) /* EPP 1.7 */ +#define IEEE1284_MODE_EPPSWE (1<<12) /* Software-emulated */ +#define IEEE1284_DEVICEID (1<<2) /* This is a flag */ +#define IEEE1284_EXT_LINK (1<<14) /* This flag causes the + * extensibility link to + * be requested, using + * bits 0-6. */ + +/* For the benefit of parport_read/write, you can use these with + * parport_negotiate to use address operations. They have no effect + * other than to make parport_read/write use address transfers. */ +#define IEEE1284_ADDR (1<<13) /* This is a flag */ +#define IEEE1284_DATA 0 /* So is this */ + +/* Flags for block transfer operations. */ +#define PARPORT_EPP_FAST (1<<0) /* Unreliable counts. */ +#define PARPORT_W91284PIC (1<<1) /* have a Warp9 w91284pic in the device */ + +/* The rest is for the kernel only */ +#endif /* _UAPI_PARPORT_H_ */ diff --git a/include/uapi/linux/patchkey.h b/include/uapi/linux/patchkey.h new file mode 100644 index 00000000000..1bda0e56bc5 --- /dev/null +++ b/include/uapi/linux/patchkey.h @@ -0,0 +1,37 @@ +/* + * <linux/patchkey.h> -- definition of _PATCHKEY macro + * + * Copyright (C) 2005 Stuart Brady + * + * This exists because awe_voice.h defined its own _PATCHKEY and it wasn't + * clear whether removing this would break anything in userspace. + * + * Do not include this file directly. Please use <sys/soundcard.h> instead. + * For kernel code, use <linux/soundcard.h> + */ + +#ifndef _LINUX_PATCHKEY_H_INDIRECT +#error "patchkey.h included directly" +#endif + +#ifndef _UAPI_LINUX_PATCHKEY_H +#define _UAPI_LINUX_PATCHKEY_H + +/* Endian macros. */ +#ifndef __KERNEL__ +# include <endian.h> +#endif + +#if !defined(__KERNEL__) +#if defined(__BYTE_ORDER) +# if __BYTE_ORDER == __BIG_ENDIAN +# define _PATCHKEY(id) (0xfd00|id) +# elif __BYTE_ORDER == __LITTLE_ENDIAN +# define _PATCHKEY(id) ((id<<8)|0x00fd) +# else +# error "could not determine byte order" +# endif +#endif +#endif + +#endif /* _UAPI_LINUX_PATCHKEY_H */ diff --git a/include/uapi/linux/pci.h b/include/uapi/linux/pci.h new file mode 100644 index 00000000000..3c292bc0d1c --- /dev/null +++ b/include/uapi/linux/pci.h @@ -0,0 +1,41 @@ +/* + * pci.h + * + * PCI defines and function prototypes + * Copyright 1994, Drew Eckhardt + * Copyright 1997--1999 Martin Mares <mj@ucw.cz> + * + * For more information, please consult the following manuals (look at + * http://www.pcisig.com/ for how to get them): + * + * PCI BIOS Specification + * PCI Local Bus Specification + * PCI to PCI Bridge Specification + * PCI System Design Guide + */ + +#ifndef _UAPILINUX_PCI_H +#define _UAPILINUX_PCI_H + +#include <linux/pci_regs.h> /* The pci register defines */ + +/* + * The PCI interface treats multi-function devices as independent + * devices. The slot/function address of each device is encoded + * in a single byte as follows: + * + * 7:3 = slot + * 2:0 = function + */ +#define PCI_DEVFN(slot, func) ((((slot) & 0x1f) << 3) | ((func) & 0x07)) +#define PCI_SLOT(devfn) (((devfn) >> 3) & 0x1f) +#define PCI_FUNC(devfn) ((devfn) & 0x07) + +/* Ioctls for /proc/bus/pci/X/Y nodes. */ +#define PCIIOC_BASE ('P' << 24 | 'C' << 16 | 'I' << 8) +#define PCIIOC_CONTROLLER (PCIIOC_BASE | 0x00) /* Get controller for PCI device. */ +#define PCIIOC_MMAP_IS_IO (PCIIOC_BASE | 0x01) /* Set mmap state to I/O space. */ +#define PCIIOC_MMAP_IS_MEM (PCIIOC_BASE | 0x02) /* Set mmap state to MEM space. */ +#define PCIIOC_WRITE_COMBINE (PCIIOC_BASE | 0x03) /* Enable/disable write-combining. */ + +#endif /* _UAPILINUX_PCI_H */ diff --git a/include/linux/pci_regs.h b/include/uapi/linux/pci_regs.h index 20ae747ddf3..20ae747ddf3 100644 --- a/include/linux/pci_regs.h +++ b/include/uapi/linux/pci_regs.h diff --git a/include/uapi/linux/perf_event.h b/include/uapi/linux/perf_event.h new file mode 100644 index 00000000000..4f63c05d27c --- /dev/null +++ b/include/uapi/linux/perf_event.h @@ -0,0 +1,615 @@ +/* + * Performance events: + * + * Copyright (C) 2008-2009, Thomas Gleixner <tglx@linutronix.de> + * Copyright (C) 2008-2011, Red Hat, Inc., Ingo Molnar + * Copyright (C) 2008-2011, Red Hat, Inc., Peter Zijlstra + * + * Data type definitions, declarations, prototypes. + * + * Started by: Thomas Gleixner and Ingo Molnar + * + * For licencing details see kernel-base/COPYING + */ +#ifndef _UAPI_LINUX_PERF_EVENT_H +#define _UAPI_LINUX_PERF_EVENT_H + +#include <linux/types.h> +#include <linux/ioctl.h> +#include <asm/byteorder.h> + +/* + * User-space ABI bits: + */ + +/* + * attr.type + */ +enum perf_type_id { + PERF_TYPE_HARDWARE = 0, + PERF_TYPE_SOFTWARE = 1, + PERF_TYPE_TRACEPOINT = 2, + PERF_TYPE_HW_CACHE = 3, + PERF_TYPE_RAW = 4, + PERF_TYPE_BREAKPOINT = 5, + + PERF_TYPE_MAX, /* non-ABI */ +}; + +/* + * Generalized performance event event_id types, used by the + * attr.event_id parameter of the sys_perf_event_open() + * syscall: + */ +enum perf_hw_id { + /* + * Common hardware events, generalized by the kernel: + */ + PERF_COUNT_HW_CPU_CYCLES = 0, + PERF_COUNT_HW_INSTRUCTIONS = 1, + PERF_COUNT_HW_CACHE_REFERENCES = 2, + PERF_COUNT_HW_CACHE_MISSES = 3, + PERF_COUNT_HW_BRANCH_INSTRUCTIONS = 4, + PERF_COUNT_HW_BRANCH_MISSES = 5, + PERF_COUNT_HW_BUS_CYCLES = 6, + PERF_COUNT_HW_STALLED_CYCLES_FRONTEND = 7, + PERF_COUNT_HW_STALLED_CYCLES_BACKEND = 8, + PERF_COUNT_HW_REF_CPU_CYCLES = 9, + + PERF_COUNT_HW_MAX, /* non-ABI */ +}; + +/* + * Generalized hardware cache events: + * + * { L1-D, L1-I, LLC, ITLB, DTLB, BPU, NODE } x + * { read, write, prefetch } x + * { accesses, misses } + */ +enum perf_hw_cache_id { + PERF_COUNT_HW_CACHE_L1D = 0, + PERF_COUNT_HW_CACHE_L1I = 1, + PERF_COUNT_HW_CACHE_LL = 2, + PERF_COUNT_HW_CACHE_DTLB = 3, + PERF_COUNT_HW_CACHE_ITLB = 4, + PERF_COUNT_HW_CACHE_BPU = 5, + PERF_COUNT_HW_CACHE_NODE = 6, + + PERF_COUNT_HW_CACHE_MAX, /* non-ABI */ +}; + +enum perf_hw_cache_op_id { + PERF_COUNT_HW_CACHE_OP_READ = 0, + PERF_COUNT_HW_CACHE_OP_WRITE = 1, + PERF_COUNT_HW_CACHE_OP_PREFETCH = 2, + + PERF_COUNT_HW_CACHE_OP_MAX, /* non-ABI */ +}; + +enum perf_hw_cache_op_result_id { + PERF_COUNT_HW_CACHE_RESULT_ACCESS = 0, + PERF_COUNT_HW_CACHE_RESULT_MISS = 1, + + PERF_COUNT_HW_CACHE_RESULT_MAX, /* non-ABI */ +}; + +/* + * Special "software" events provided by the kernel, even if the hardware + * does not support performance events. These events measure various + * physical and sw events of the kernel (and allow the profiling of them as + * well): + */ +enum perf_sw_ids { + PERF_COUNT_SW_CPU_CLOCK = 0, + PERF_COUNT_SW_TASK_CLOCK = 1, + PERF_COUNT_SW_PAGE_FAULTS = 2, + PERF_COUNT_SW_CONTEXT_SWITCHES = 3, + PERF_COUNT_SW_CPU_MIGRATIONS = 4, + PERF_COUNT_SW_PAGE_FAULTS_MIN = 5, + PERF_COUNT_SW_PAGE_FAULTS_MAJ = 6, + PERF_COUNT_SW_ALIGNMENT_FAULTS = 7, + PERF_COUNT_SW_EMULATION_FAULTS = 8, + + PERF_COUNT_SW_MAX, /* non-ABI */ +}; + +/* + * Bits that can be set in attr.sample_type to request information + * in the overflow packets. + */ +enum perf_event_sample_format { + PERF_SAMPLE_IP = 1U << 0, + PERF_SAMPLE_TID = 1U << 1, + PERF_SAMPLE_TIME = 1U << 2, + PERF_SAMPLE_ADDR = 1U << 3, + PERF_SAMPLE_READ = 1U << 4, + PERF_SAMPLE_CALLCHAIN = 1U << 5, + PERF_SAMPLE_ID = 1U << 6, + PERF_SAMPLE_CPU = 1U << 7, + PERF_SAMPLE_PERIOD = 1U << 8, + PERF_SAMPLE_STREAM_ID = 1U << 9, + PERF_SAMPLE_RAW = 1U << 10, + PERF_SAMPLE_BRANCH_STACK = 1U << 11, + PERF_SAMPLE_REGS_USER = 1U << 12, + PERF_SAMPLE_STACK_USER = 1U << 13, + + PERF_SAMPLE_MAX = 1U << 14, /* non-ABI */ +}; + +/* + * values to program into branch_sample_type when PERF_SAMPLE_BRANCH is set + * + * If the user does not pass priv level information via branch_sample_type, + * the kernel uses the event's priv level. Branch and event priv levels do + * not have to match. Branch priv level is checked for permissions. + * + * The branch types can be combined, however BRANCH_ANY covers all types + * of branches and therefore it supersedes all the other types. + */ +enum perf_branch_sample_type { + PERF_SAMPLE_BRANCH_USER = 1U << 0, /* user branches */ + PERF_SAMPLE_BRANCH_KERNEL = 1U << 1, /* kernel branches */ + PERF_SAMPLE_BRANCH_HV = 1U << 2, /* hypervisor branches */ + + PERF_SAMPLE_BRANCH_ANY = 1U << 3, /* any branch types */ + PERF_SAMPLE_BRANCH_ANY_CALL = 1U << 4, /* any call branch */ + PERF_SAMPLE_BRANCH_ANY_RETURN = 1U << 5, /* any return branch */ + PERF_SAMPLE_BRANCH_IND_CALL = 1U << 6, /* indirect calls */ + + PERF_SAMPLE_BRANCH_MAX = 1U << 7, /* non-ABI */ +}; + +#define PERF_SAMPLE_BRANCH_PLM_ALL \ + (PERF_SAMPLE_BRANCH_USER|\ + PERF_SAMPLE_BRANCH_KERNEL|\ + PERF_SAMPLE_BRANCH_HV) + +/* + * Values to determine ABI of the registers dump. + */ +enum perf_sample_regs_abi { + PERF_SAMPLE_REGS_ABI_NONE = 0, + PERF_SAMPLE_REGS_ABI_32 = 1, + PERF_SAMPLE_REGS_ABI_64 = 2, +}; + +/* + * The format of the data returned by read() on a perf event fd, + * as specified by attr.read_format: + * + * struct read_format { + * { u64 value; + * { u64 time_enabled; } && PERF_FORMAT_TOTAL_TIME_ENABLED + * { u64 time_running; } && PERF_FORMAT_TOTAL_TIME_RUNNING + * { u64 id; } && PERF_FORMAT_ID + * } && !PERF_FORMAT_GROUP + * + * { u64 nr; + * { u64 time_enabled; } && PERF_FORMAT_TOTAL_TIME_ENABLED + * { u64 time_running; } && PERF_FORMAT_TOTAL_TIME_RUNNING + * { u64 value; + * { u64 id; } && PERF_FORMAT_ID + * } cntr[nr]; + * } && PERF_FORMAT_GROUP + * }; + */ +enum perf_event_read_format { + PERF_FORMAT_TOTAL_TIME_ENABLED = 1U << 0, + PERF_FORMAT_TOTAL_TIME_RUNNING = 1U << 1, + PERF_FORMAT_ID = 1U << 2, + PERF_FORMAT_GROUP = 1U << 3, + + PERF_FORMAT_MAX = 1U << 4, /* non-ABI */ +}; + +#define PERF_ATTR_SIZE_VER0 64 /* sizeof first published struct */ +#define PERF_ATTR_SIZE_VER1 72 /* add: config2 */ +#define PERF_ATTR_SIZE_VER2 80 /* add: branch_sample_type */ +#define PERF_ATTR_SIZE_VER3 96 /* add: sample_regs_user */ + /* add: sample_stack_user */ + +/* + * Hardware event_id to monitor via a performance monitoring event: + */ +struct perf_event_attr { + + /* + * Major type: hardware/software/tracepoint/etc. + */ + __u32 type; + + /* + * Size of the attr structure, for fwd/bwd compat. + */ + __u32 size; + + /* + * Type specific configuration information. + */ + __u64 config; + + union { + __u64 sample_period; + __u64 sample_freq; + }; + + __u64 sample_type; + __u64 read_format; + + __u64 disabled : 1, /* off by default */ + inherit : 1, /* children inherit it */ + pinned : 1, /* must always be on PMU */ + exclusive : 1, /* only group on PMU */ + exclude_user : 1, /* don't count user */ + exclude_kernel : 1, /* ditto kernel */ + exclude_hv : 1, /* ditto hypervisor */ + exclude_idle : 1, /* don't count when idle */ + mmap : 1, /* include mmap data */ + comm : 1, /* include comm data */ + freq : 1, /* use freq, not period */ + inherit_stat : 1, /* per task counts */ + enable_on_exec : 1, /* next exec enables */ + task : 1, /* trace fork/exit */ + watermark : 1, /* wakeup_watermark */ + /* + * precise_ip: + * + * 0 - SAMPLE_IP can have arbitrary skid + * 1 - SAMPLE_IP must have constant skid + * 2 - SAMPLE_IP requested to have 0 skid + * 3 - SAMPLE_IP must have 0 skid + * + * See also PERF_RECORD_MISC_EXACT_IP + */ + precise_ip : 2, /* skid constraint */ + mmap_data : 1, /* non-exec mmap data */ + sample_id_all : 1, /* sample_type all events */ + + exclude_host : 1, /* don't count in host */ + exclude_guest : 1, /* don't count in guest */ + + exclude_callchain_kernel : 1, /* exclude kernel callchains */ + exclude_callchain_user : 1, /* exclude user callchains */ + + __reserved_1 : 41; + + union { + __u32 wakeup_events; /* wakeup every n events */ + __u32 wakeup_watermark; /* bytes before wakeup */ + }; + + __u32 bp_type; + union { + __u64 bp_addr; + __u64 config1; /* extension of config */ + }; + union { + __u64 bp_len; + __u64 config2; /* extension of config1 */ + }; + __u64 branch_sample_type; /* enum perf_branch_sample_type */ + + /* + * Defines set of user regs to dump on samples. + * See asm/perf_regs.h for details. + */ + __u64 sample_regs_user; + + /* + * Defines size of the user stack to dump on samples. + */ + __u32 sample_stack_user; + + /* Align to u64. */ + __u32 __reserved_2; +}; + +#define perf_flags(attr) (*(&(attr)->read_format + 1)) + +/* + * Ioctls that can be done on a perf event fd: + */ +#define PERF_EVENT_IOC_ENABLE _IO ('$', 0) +#define PERF_EVENT_IOC_DISABLE _IO ('$', 1) +#define PERF_EVENT_IOC_REFRESH _IO ('$', 2) +#define PERF_EVENT_IOC_RESET _IO ('$', 3) +#define PERF_EVENT_IOC_PERIOD _IOW('$', 4, __u64) +#define PERF_EVENT_IOC_SET_OUTPUT _IO ('$', 5) +#define PERF_EVENT_IOC_SET_FILTER _IOW('$', 6, char *) + +enum perf_event_ioc_flags { + PERF_IOC_FLAG_GROUP = 1U << 0, +}; + +/* + * Structure of the page that can be mapped via mmap + */ +struct perf_event_mmap_page { + __u32 version; /* version number of this structure */ + __u32 compat_version; /* lowest version this is compat with */ + + /* + * Bits needed to read the hw events in user-space. + * + * u32 seq, time_mult, time_shift, idx, width; + * u64 count, enabled, running; + * u64 cyc, time_offset; + * s64 pmc = 0; + * + * do { + * seq = pc->lock; + * barrier() + * + * enabled = pc->time_enabled; + * running = pc->time_running; + * + * if (pc->cap_usr_time && enabled != running) { + * cyc = rdtsc(); + * time_offset = pc->time_offset; + * time_mult = pc->time_mult; + * time_shift = pc->time_shift; + * } + * + * idx = pc->index; + * count = pc->offset; + * if (pc->cap_usr_rdpmc && idx) { + * width = pc->pmc_width; + * pmc = rdpmc(idx - 1); + * } + * + * barrier(); + * } while (pc->lock != seq); + * + * NOTE: for obvious reason this only works on self-monitoring + * processes. + */ + __u32 lock; /* seqlock for synchronization */ + __u32 index; /* hardware event identifier */ + __s64 offset; /* add to hardware event value */ + __u64 time_enabled; /* time event active */ + __u64 time_running; /* time event on cpu */ + union { + __u64 capabilities; + __u64 cap_usr_time : 1, + cap_usr_rdpmc : 1, + cap_____res : 62; + }; + + /* + * If cap_usr_rdpmc this field provides the bit-width of the value + * read using the rdpmc() or equivalent instruction. This can be used + * to sign extend the result like: + * + * pmc <<= 64 - width; + * pmc >>= 64 - width; // signed shift right + * count += pmc; + */ + __u16 pmc_width; + + /* + * If cap_usr_time the below fields can be used to compute the time + * delta since time_enabled (in ns) using rdtsc or similar. + * + * u64 quot, rem; + * u64 delta; + * + * quot = (cyc >> time_shift); + * rem = cyc & ((1 << time_shift) - 1); + * delta = time_offset + quot * time_mult + + * ((rem * time_mult) >> time_shift); + * + * Where time_offset,time_mult,time_shift and cyc are read in the + * seqcount loop described above. This delta can then be added to + * enabled and possible running (if idx), improving the scaling: + * + * enabled += delta; + * if (idx) + * running += delta; + * + * quot = count / running; + * rem = count % running; + * count = quot * enabled + (rem * enabled) / running; + */ + __u16 time_shift; + __u32 time_mult; + __u64 time_offset; + + /* + * Hole for extension of the self monitor capabilities + */ + + __u64 __reserved[120]; /* align to 1k */ + + /* + * Control data for the mmap() data buffer. + * + * User-space reading the @data_head value should issue an rmb(), on + * SMP capable platforms, after reading this value -- see + * perf_event_wakeup(). + * + * When the mapping is PROT_WRITE the @data_tail value should be + * written by userspace to reflect the last read data. In this case + * the kernel will not over-write unread data. + */ + __u64 data_head; /* head in the data section */ + __u64 data_tail; /* user-space written tail */ +}; + +#define PERF_RECORD_MISC_CPUMODE_MASK (7 << 0) +#define PERF_RECORD_MISC_CPUMODE_UNKNOWN (0 << 0) +#define PERF_RECORD_MISC_KERNEL (1 << 0) +#define PERF_RECORD_MISC_USER (2 << 0) +#define PERF_RECORD_MISC_HYPERVISOR (3 << 0) +#define PERF_RECORD_MISC_GUEST_KERNEL (4 << 0) +#define PERF_RECORD_MISC_GUEST_USER (5 << 0) + +/* + * Indicates that the content of PERF_SAMPLE_IP points to + * the actual instruction that triggered the event. See also + * perf_event_attr::precise_ip. + */ +#define PERF_RECORD_MISC_EXACT_IP (1 << 14) +/* + * Reserve the last bit to indicate some extended misc field + */ +#define PERF_RECORD_MISC_EXT_RESERVED (1 << 15) + +struct perf_event_header { + __u32 type; + __u16 misc; + __u16 size; +}; + +enum perf_event_type { + + /* + * If perf_event_attr.sample_id_all is set then all event types will + * have the sample_type selected fields related to where/when + * (identity) an event took place (TID, TIME, ID, CPU, STREAM_ID) + * described in PERF_RECORD_SAMPLE below, it will be stashed just after + * the perf_event_header and the fields already present for the existing + * fields, i.e. at the end of the payload. That way a newer perf.data + * file will be supported by older perf tools, with these new optional + * fields being ignored. + * + * The MMAP events record the PROT_EXEC mappings so that we can + * correlate userspace IPs to code. They have the following structure: + * + * struct { + * struct perf_event_header header; + * + * u32 pid, tid; + * u64 addr; + * u64 len; + * u64 pgoff; + * char filename[]; + * }; + */ + PERF_RECORD_MMAP = 1, + + /* + * struct { + * struct perf_event_header header; + * u64 id; + * u64 lost; + * }; + */ + PERF_RECORD_LOST = 2, + + /* + * struct { + * struct perf_event_header header; + * + * u32 pid, tid; + * char comm[]; + * }; + */ + PERF_RECORD_COMM = 3, + + /* + * struct { + * struct perf_event_header header; + * u32 pid, ppid; + * u32 tid, ptid; + * u64 time; + * }; + */ + PERF_RECORD_EXIT = 4, + + /* + * struct { + * struct perf_event_header header; + * u64 time; + * u64 id; + * u64 stream_id; + * }; + */ + PERF_RECORD_THROTTLE = 5, + PERF_RECORD_UNTHROTTLE = 6, + + /* + * struct { + * struct perf_event_header header; + * u32 pid, ppid; + * u32 tid, ptid; + * u64 time; + * }; + */ + PERF_RECORD_FORK = 7, + + /* + * struct { + * struct perf_event_header header; + * u32 pid, tid; + * + * struct read_format values; + * }; + */ + PERF_RECORD_READ = 8, + + /* + * struct { + * struct perf_event_header header; + * + * { u64 ip; } && PERF_SAMPLE_IP + * { u32 pid, tid; } && PERF_SAMPLE_TID + * { u64 time; } && PERF_SAMPLE_TIME + * { u64 addr; } && PERF_SAMPLE_ADDR + * { u64 id; } && PERF_SAMPLE_ID + * { u64 stream_id;} && PERF_SAMPLE_STREAM_ID + * { u32 cpu, res; } && PERF_SAMPLE_CPU + * { u64 period; } && PERF_SAMPLE_PERIOD + * + * { struct read_format values; } && PERF_SAMPLE_READ + * + * { u64 nr, + * u64 ips[nr]; } && PERF_SAMPLE_CALLCHAIN + * + * # + * # The RAW record below is opaque data wrt the ABI + * # + * # That is, the ABI doesn't make any promises wrt to + * # the stability of its content, it may vary depending + * # on event, hardware, kernel version and phase of + * # the moon. + * # + * # In other words, PERF_SAMPLE_RAW contents are not an ABI. + * # + * + * { u32 size; + * char data[size];}&& PERF_SAMPLE_RAW + * + * { u64 from, to, flags } lbr[nr];} && PERF_SAMPLE_BRANCH_STACK + * + * { u64 abi; # enum perf_sample_regs_abi + * u64 regs[weight(mask)]; } && PERF_SAMPLE_REGS_USER + * + * { u64 size; + * char data[size]; + * u64 dyn_size; } && PERF_SAMPLE_STACK_USER + * }; + */ + PERF_RECORD_SAMPLE = 9, + + PERF_RECORD_MAX, /* non-ABI */ +}; + +#define PERF_MAX_STACK_DEPTH 127 + +enum perf_callchain_context { + PERF_CONTEXT_HV = (__u64)-32, + PERF_CONTEXT_KERNEL = (__u64)-128, + PERF_CONTEXT_USER = (__u64)-512, + + PERF_CONTEXT_GUEST = (__u64)-2048, + PERF_CONTEXT_GUEST_KERNEL = (__u64)-2176, + PERF_CONTEXT_GUEST_USER = (__u64)-2560, + + PERF_CONTEXT_MAX = (__u64)-4095, +}; + +#define PERF_FLAG_FD_NO_GROUP (1U << 0) +#define PERF_FLAG_FD_OUTPUT (1U << 1) +#define PERF_FLAG_PID_CGROUP (1U << 2) /* pid=cgroup id, per-cpu mode only */ + +#endif /* _UAPI_LINUX_PERF_EVENT_H */ diff --git a/include/uapi/linux/personality.h b/include/uapi/linux/personality.h new file mode 100644 index 00000000000..aa169c4339d --- /dev/null +++ b/include/uapi/linux/personality.h @@ -0,0 +1,69 @@ +#ifndef _UAPI_LINUX_PERSONALITY_H +#define _UAPI_LINUX_PERSONALITY_H + + +/* + * Flags for bug emulation. + * + * These occupy the top three bytes. + */ +enum { + UNAME26 = 0x0020000, + ADDR_NO_RANDOMIZE = 0x0040000, /* disable randomization of VA space */ + FDPIC_FUNCPTRS = 0x0080000, /* userspace function ptrs point to descriptors + * (signal handling) + */ + MMAP_PAGE_ZERO = 0x0100000, + ADDR_COMPAT_LAYOUT = 0x0200000, + READ_IMPLIES_EXEC = 0x0400000, + ADDR_LIMIT_32BIT = 0x0800000, + SHORT_INODE = 0x1000000, + WHOLE_SECONDS = 0x2000000, + STICKY_TIMEOUTS = 0x4000000, + ADDR_LIMIT_3GB = 0x8000000, +}; + +/* + * Security-relevant compatibility flags that must be + * cleared upon setuid or setgid exec: + */ +#define PER_CLEAR_ON_SETID (READ_IMPLIES_EXEC | \ + ADDR_NO_RANDOMIZE | \ + ADDR_COMPAT_LAYOUT | \ + MMAP_PAGE_ZERO) + +/* + * Personality types. + * + * These go in the low byte. Avoid using the top bit, it will + * conflict with error returns. + */ +enum { + PER_LINUX = 0x0000, + PER_LINUX_32BIT = 0x0000 | ADDR_LIMIT_32BIT, + PER_LINUX_FDPIC = 0x0000 | FDPIC_FUNCPTRS, + PER_SVR4 = 0x0001 | STICKY_TIMEOUTS | MMAP_PAGE_ZERO, + PER_SVR3 = 0x0002 | STICKY_TIMEOUTS | SHORT_INODE, + PER_SCOSVR3 = 0x0003 | STICKY_TIMEOUTS | + WHOLE_SECONDS | SHORT_INODE, + PER_OSR5 = 0x0003 | STICKY_TIMEOUTS | WHOLE_SECONDS, + PER_WYSEV386 = 0x0004 | STICKY_TIMEOUTS | SHORT_INODE, + PER_ISCR4 = 0x0005 | STICKY_TIMEOUTS, + PER_BSD = 0x0006, + PER_SUNOS = 0x0006 | STICKY_TIMEOUTS, + PER_XENIX = 0x0007 | STICKY_TIMEOUTS | SHORT_INODE, + PER_LINUX32 = 0x0008, + PER_LINUX32_3GB = 0x0008 | ADDR_LIMIT_3GB, + PER_IRIX32 = 0x0009 | STICKY_TIMEOUTS,/* IRIX5 32-bit */ + PER_IRIXN32 = 0x000a | STICKY_TIMEOUTS,/* IRIX6 new 32-bit */ + PER_IRIX64 = 0x000b | STICKY_TIMEOUTS,/* IRIX6 64-bit */ + PER_RISCOS = 0x000c, + PER_SOLARIS = 0x000d | STICKY_TIMEOUTS, + PER_UW7 = 0x000e | STICKY_TIMEOUTS | MMAP_PAGE_ZERO, + PER_OSF4 = 0x000f, /* OSF/1 v4 */ + PER_HPUX = 0x0010, + PER_MASK = 0x00ff, +}; + + +#endif /* _UAPI_LINUX_PERSONALITY_H */ diff --git a/include/linux/pfkeyv2.h b/include/uapi/linux/pfkeyv2.h index 0b80c806631..0b80c806631 100644 --- a/include/linux/pfkeyv2.h +++ b/include/uapi/linux/pfkeyv2.h diff --git a/include/linux/pg.h b/include/uapi/linux/pg.h index db994bb0c79..db994bb0c79 100644 --- a/include/linux/pg.h +++ b/include/uapi/linux/pg.h diff --git a/include/linux/phantom.h b/include/uapi/linux/phantom.h index 94dd6645c60..94dd6645c60 100644 --- a/include/linux/phantom.h +++ b/include/uapi/linux/phantom.h diff --git a/include/uapi/linux/phonet.h b/include/uapi/linux/phonet.h new file mode 100644 index 00000000000..a3e1d65b3ed --- /dev/null +++ b/include/uapi/linux/phonet.h @@ -0,0 +1,185 @@ +/** + * file phonet.h + * + * Phonet sockets kernel interface + * + * Copyright (C) 2008 Nokia Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef _UAPILINUX_PHONET_H +#define _UAPILINUX_PHONET_H + +#include <linux/types.h> +#include <linux/socket.h> + +/* Automatic protocol selection */ +#define PN_PROTO_TRANSPORT 0 +/* Phonet datagram socket */ +#define PN_PROTO_PHONET 1 +/* Phonet pipe */ +#define PN_PROTO_PIPE 2 +#define PHONET_NPROTO 3 + +/* Socket options for SOL_PNPIPE level */ +#define PNPIPE_ENCAP 1 +#define PNPIPE_IFINDEX 2 +#define PNPIPE_HANDLE 3 +#define PNPIPE_INITSTATE 4 + +#define PNADDR_ANY 0 +#define PNADDR_BROADCAST 0xFC +#define PNPORT_RESOURCE_ROUTING 0 + +/* Values for PNPIPE_ENCAP option */ +#define PNPIPE_ENCAP_NONE 0 +#define PNPIPE_ENCAP_IP 1 + +/* ioctls */ +#define SIOCPNGETOBJECT (SIOCPROTOPRIVATE + 0) +#define SIOCPNENABLEPIPE (SIOCPROTOPRIVATE + 13) +#define SIOCPNADDRESOURCE (SIOCPROTOPRIVATE + 14) +#define SIOCPNDELRESOURCE (SIOCPROTOPRIVATE + 15) + +/* Phonet protocol header */ +struct phonethdr { + __u8 pn_rdev; + __u8 pn_sdev; + __u8 pn_res; + __be16 pn_length; + __u8 pn_robj; + __u8 pn_sobj; +} __attribute__((packed)); + +/* Common Phonet payload header */ +struct phonetmsg { + __u8 pn_trans_id; /* transaction ID */ + __u8 pn_msg_id; /* message type */ + union { + struct { + __u8 pn_submsg_id; /* message subtype */ + __u8 pn_data[5]; + } base; + struct { + __u16 pn_e_res_id; /* extended resource ID */ + __u8 pn_e_submsg_id; /* message subtype */ + __u8 pn_e_data[3]; + } ext; + } pn_msg_u; +}; +#define PN_COMMON_MESSAGE 0xF0 +#define PN_COMMGR 0x10 +#define PN_PREFIX 0xE0 /* resource for extended messages */ +#define pn_submsg_id pn_msg_u.base.pn_submsg_id +#define pn_e_submsg_id pn_msg_u.ext.pn_e_submsg_id +#define pn_e_res_id pn_msg_u.ext.pn_e_res_id +#define pn_data pn_msg_u.base.pn_data +#define pn_e_data pn_msg_u.ext.pn_e_data + +/* data for unreachable errors */ +#define PN_COMM_SERVICE_NOT_IDENTIFIED_RESP 0x01 +#define PN_COMM_ISA_ENTITY_NOT_REACHABLE_RESP 0x14 +#define pn_orig_msg_id pn_data[0] +#define pn_status pn_data[1] +#define pn_e_orig_msg_id pn_e_data[0] +#define pn_e_status pn_e_data[1] + +/* Phonet socket address structure */ +struct sockaddr_pn { + __kernel_sa_family_t spn_family; + __u8 spn_obj; + __u8 spn_dev; + __u8 spn_resource; + __u8 spn_zero[sizeof(struct sockaddr) - sizeof(__kernel_sa_family_t) - 3]; +} __attribute__((packed)); + +/* Well known address */ +#define PN_DEV_PC 0x10 + +static inline __u16 pn_object(__u8 addr, __u16 port) +{ + return (addr << 8) | (port & 0x3ff); +} + +static inline __u8 pn_obj(__u16 handle) +{ + return handle & 0xff; +} + +static inline __u8 pn_dev(__u16 handle) +{ + return handle >> 8; +} + +static inline __u16 pn_port(__u16 handle) +{ + return handle & 0x3ff; +} + +static inline __u8 pn_addr(__u16 handle) +{ + return (handle >> 8) & 0xfc; +} + +static inline void pn_sockaddr_set_addr(struct sockaddr_pn *spn, __u8 addr) +{ + spn->spn_dev &= 0x03; + spn->spn_dev |= addr & 0xfc; +} + +static inline void pn_sockaddr_set_port(struct sockaddr_pn *spn, __u16 port) +{ + spn->spn_dev &= 0xfc; + spn->spn_dev |= (port >> 8) & 0x03; + spn->spn_obj = port & 0xff; +} + +static inline void pn_sockaddr_set_object(struct sockaddr_pn *spn, + __u16 handle) +{ + spn->spn_dev = pn_dev(handle); + spn->spn_obj = pn_obj(handle); +} + +static inline void pn_sockaddr_set_resource(struct sockaddr_pn *spn, + __u8 resource) +{ + spn->spn_resource = resource; +} + +static inline __u8 pn_sockaddr_get_addr(const struct sockaddr_pn *spn) +{ + return spn->spn_dev & 0xfc; +} + +static inline __u16 pn_sockaddr_get_port(const struct sockaddr_pn *spn) +{ + return ((spn->spn_dev & 0x03) << 8) | spn->spn_obj; +} + +static inline __u16 pn_sockaddr_get_object(const struct sockaddr_pn *spn) +{ + return pn_object(spn->spn_dev, spn->spn_obj); +} + +static inline __u8 pn_sockaddr_get_resource(const struct sockaddr_pn *spn) +{ + return spn->spn_resource; +} + +/* Phonet device ioctl requests */ + +#endif /* _UAPILINUX_PHONET_H */ diff --git a/include/linux/pkt_cls.h b/include/uapi/linux/pkt_cls.h index 082eafaf026..082eafaf026 100644 --- a/include/linux/pkt_cls.h +++ b/include/uapi/linux/pkt_cls.h diff --git a/include/linux/pkt_sched.h b/include/uapi/linux/pkt_sched.h index 32aef0a439e..32aef0a439e 100644 --- a/include/linux/pkt_sched.h +++ b/include/uapi/linux/pkt_sched.h diff --git a/include/uapi/linux/pktcdvd.h b/include/uapi/linux/pktcdvd.h new file mode 100644 index 00000000000..2640b9d4e24 --- /dev/null +++ b/include/uapi/linux/pktcdvd.h @@ -0,0 +1,111 @@ +/* + * Copyright (C) 2000 Jens Axboe <axboe@suse.de> + * Copyright (C) 2001-2004 Peter Osterlund <petero2@telia.com> + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * Packet writing layer for ATAPI and SCSI CD-R, CD-RW, DVD-R, and + * DVD-RW devices. + * + */ +#ifndef _UAPI__PKTCDVD_H +#define _UAPI__PKTCDVD_H + +#include <linux/types.h> + +/* + * 1 for normal debug messages, 2 is very verbose. 0 to turn it off. + */ +#define PACKET_DEBUG 1 + +#define MAX_WRITERS 8 + +#define PKT_RB_POOL_SIZE 512 + +/* + * How long we should hold a non-full packet before starting data gathering. + */ +#define PACKET_WAIT_TIME (HZ * 5 / 1000) + +/* + * use drive write caching -- we need deferred error handling to be + * able to successfully recover with this option (drive will return good + * status as soon as the cdb is validated). + */ +#if defined(CONFIG_CDROM_PKTCDVD_WCACHE) +#define USE_WCACHING 1 +#else +#define USE_WCACHING 0 +#endif + +/* + * No user-servicable parts beyond this point -> + */ + +/* + * device types + */ +#define PACKET_CDR 1 +#define PACKET_CDRW 2 +#define PACKET_DVDR 3 +#define PACKET_DVDRW 4 + +/* + * flags + */ +#define PACKET_WRITABLE 1 /* pd is writable */ +#define PACKET_NWA_VALID 2 /* next writable address valid */ +#define PACKET_LRA_VALID 3 /* last recorded address valid */ +#define PACKET_MERGE_SEGS 4 /* perform segment merging to keep */ + /* underlying cdrom device happy */ + +/* + * Disc status -- from READ_DISC_INFO + */ +#define PACKET_DISC_EMPTY 0 +#define PACKET_DISC_INCOMPLETE 1 +#define PACKET_DISC_COMPLETE 2 +#define PACKET_DISC_OTHER 3 + +/* + * write type, and corresponding data block type + */ +#define PACKET_MODE1 1 +#define PACKET_MODE2 2 +#define PACKET_BLOCK_MODE1 8 +#define PACKET_BLOCK_MODE2 10 + +/* + * Last session/border status + */ +#define PACKET_SESSION_EMPTY 0 +#define PACKET_SESSION_INCOMPLETE 1 +#define PACKET_SESSION_RESERVED 2 +#define PACKET_SESSION_COMPLETE 3 + +#define PACKET_MCN "4a656e734178626f65323030300000" + +#undef PACKET_USE_LS + +#define PKT_CTRL_CMD_SETUP 0 +#define PKT_CTRL_CMD_TEARDOWN 1 +#define PKT_CTRL_CMD_STATUS 2 + +struct pkt_ctrl_command { + __u32 command; /* in: Setup, teardown, status */ + __u32 dev_index; /* in/out: Device index */ + __u32 dev; /* in/out: Device nr for cdrw device */ + __u32 pkt_dev; /* in/out: Device nr for packet device */ + __u32 num_devices; /* out: Largest device index + 1 */ + __u32 padding; /* Not used */ +}; + +/* + * packet ioctls + */ +#define PACKET_IOCTL_MAGIC ('X') +#define PACKET_CTRL_CMD _IOWR(PACKET_IOCTL_MAGIC, 1, struct pkt_ctrl_command) + + +#endif /* _UAPI__PKTCDVD_H */ diff --git a/include/uapi/linux/pmu.h b/include/uapi/linux/pmu.h new file mode 100644 index 00000000000..caead364b6e --- /dev/null +++ b/include/uapi/linux/pmu.h @@ -0,0 +1,139 @@ +/* + * Definitions for talking to the PMU. The PMU is a microcontroller + * which controls battery charging and system power on PowerBook 3400 + * and 2400 models as well as the RTC and various other things. + * + * Copyright (C) 1998 Paul Mackerras. + */ + +#ifndef _UAPI_LINUX_PMU_H +#define _UAPI_LINUX_PMU_H + +#define PMU_DRIVER_VERSION 2 + +/* + * PMU commands + */ +#define PMU_POWER_CTRL0 0x10 /* control power of some devices */ +#define PMU_POWER_CTRL 0x11 /* control power of some devices */ +#define PMU_ADB_CMD 0x20 /* send ADB packet */ +#define PMU_ADB_POLL_OFF 0x21 /* disable ADB auto-poll */ +#define PMU_WRITE_NVRAM 0x33 /* write non-volatile RAM */ +#define PMU_READ_NVRAM 0x3b /* read non-volatile RAM */ +#define PMU_SET_RTC 0x30 /* set real-time clock */ +#define PMU_READ_RTC 0x38 /* read real-time clock */ +#define PMU_SET_VOLBUTTON 0x40 /* set volume up/down position */ +#define PMU_BACKLIGHT_BRIGHT 0x41 /* set backlight brightness */ +#define PMU_GET_VOLBUTTON 0x48 /* get volume up/down position */ +#define PMU_PCEJECT 0x4c /* eject PC-card from slot */ +#define PMU_BATTERY_STATE 0x6b /* report battery state etc. */ +#define PMU_SMART_BATTERY_STATE 0x6f /* report battery state (new way) */ +#define PMU_SET_INTR_MASK 0x70 /* set PMU interrupt mask */ +#define PMU_INT_ACK 0x78 /* read interrupt bits */ +#define PMU_SHUTDOWN 0x7e /* turn power off */ +#define PMU_CPU_SPEED 0x7d /* control CPU speed on some models */ +#define PMU_SLEEP 0x7f /* put CPU to sleep */ +#define PMU_POWER_EVENTS 0x8f /* Send power-event commands to PMU */ +#define PMU_I2C_CMD 0x9a /* I2C operations */ +#define PMU_RESET 0xd0 /* reset CPU */ +#define PMU_GET_BRIGHTBUTTON 0xd9 /* report brightness up/down pos */ +#define PMU_GET_COVER 0xdc /* report cover open/closed */ +#define PMU_SYSTEM_READY 0xdf /* tell PMU we are awake */ +#define PMU_GET_VERSION 0xea /* read the PMU version */ + +/* Bits to use with the PMU_POWER_CTRL0 command */ +#define PMU_POW0_ON 0x80 /* OR this to power ON the device */ +#define PMU_POW0_OFF 0x00 /* leave bit 7 to 0 to power it OFF */ +#define PMU_POW0_HARD_DRIVE 0x04 /* Hard drive power (on wallstreet/lombard ?) */ + +/* Bits to use with the PMU_POWER_CTRL command */ +#define PMU_POW_ON 0x80 /* OR this to power ON the device */ +#define PMU_POW_OFF 0x00 /* leave bit 7 to 0 to power it OFF */ +#define PMU_POW_BACKLIGHT 0x01 /* backlight power */ +#define PMU_POW_CHARGER 0x02 /* battery charger power */ +#define PMU_POW_IRLED 0x04 /* IR led power (on wallstreet) */ +#define PMU_POW_MEDIABAY 0x08 /* media bay power (wallstreet/lombard ?) */ + +/* Bits in PMU interrupt and interrupt mask bytes */ +#define PMU_INT_PCEJECT 0x04 /* PC-card eject buttons */ +#define PMU_INT_SNDBRT 0x08 /* sound/brightness up/down buttons */ +#define PMU_INT_ADB 0x10 /* ADB autopoll or reply data */ +#define PMU_INT_BATTERY 0x20 /* Battery state change */ +#define PMU_INT_ENVIRONMENT 0x40 /* Environment interrupts */ +#define PMU_INT_TICK 0x80 /* 1-second tick interrupt */ + +/* Other bits in PMU interrupt valid when PMU_INT_ADB is set */ +#define PMU_INT_ADB_AUTO 0x04 /* ADB autopoll, when PMU_INT_ADB */ +#define PMU_INT_WAITING_CHARGER 0x01 /* ??? */ +#define PMU_INT_AUTO_SRQ_POLL 0x02 /* ??? */ + +/* Bits in the environement message (either obtained via PMU_GET_COVER, + * or via PMU_INT_ENVIRONMENT on core99 */ +#define PMU_ENV_LID_CLOSED 0x01 /* The lid is closed */ + +/* I2C related definitions */ +#define PMU_I2C_MODE_SIMPLE 0 +#define PMU_I2C_MODE_STDSUB 1 +#define PMU_I2C_MODE_COMBINED 2 + +#define PMU_I2C_BUS_STATUS 0 +#define PMU_I2C_BUS_SYSCLK 1 +#define PMU_I2C_BUS_POWER 2 + +#define PMU_I2C_STATUS_OK 0 +#define PMU_I2C_STATUS_DATAREAD 1 +#define PMU_I2C_STATUS_BUSY 0xfe + + +/* Kind of PMU (model) */ +enum { + PMU_UNKNOWN, + PMU_OHARE_BASED, /* 2400, 3400, 3500 (old G3 powerbook) */ + PMU_HEATHROW_BASED, /* PowerBook G3 series */ + PMU_PADDINGTON_BASED, /* 1999 PowerBook G3 */ + PMU_KEYLARGO_BASED, /* Core99 motherboard (PMU99) */ + PMU_68K_V1, /* 68K PMU, version 1 */ + PMU_68K_V2, /* 68K PMU, version 2 */ +}; + +/* PMU PMU_POWER_EVENTS commands */ +enum { + PMU_PWR_GET_POWERUP_EVENTS = 0x00, + PMU_PWR_SET_POWERUP_EVENTS = 0x01, + PMU_PWR_CLR_POWERUP_EVENTS = 0x02, + PMU_PWR_GET_WAKEUP_EVENTS = 0x03, + PMU_PWR_SET_WAKEUP_EVENTS = 0x04, + PMU_PWR_CLR_WAKEUP_EVENTS = 0x05, +}; + +/* Power events wakeup bits */ +enum { + PMU_PWR_WAKEUP_KEY = 0x01, /* Wake on key press */ + PMU_PWR_WAKEUP_AC_INSERT = 0x02, /* Wake on AC adapter plug */ + PMU_PWR_WAKEUP_AC_CHANGE = 0x04, + PMU_PWR_WAKEUP_LID_OPEN = 0x08, + PMU_PWR_WAKEUP_RING = 0x10, +}; + +/* + * Ioctl commands for the /dev/pmu device + */ +#include <linux/ioctl.h> + +/* no param */ +#define PMU_IOC_SLEEP _IO('B', 0) +/* out param: u32* backlight value: 0 to 15 */ +#define PMU_IOC_GET_BACKLIGHT _IOR('B', 1, size_t) +/* in param: u32 backlight value: 0 to 15 */ +#define PMU_IOC_SET_BACKLIGHT _IOW('B', 2, size_t) +/* out param: u32* PMU model */ +#define PMU_IOC_GET_MODEL _IOR('B', 3, size_t) +/* out param: u32* has_adb: 0 or 1 */ +#define PMU_IOC_HAS_ADB _IOR('B', 4, size_t) +/* out param: u32* can_sleep: 0 or 1 */ +#define PMU_IOC_CAN_SLEEP _IOR('B', 5, size_t) +/* no param, but historically was _IOR('B', 6, 0), meaning 4 bytes */ +#define PMU_IOC_GRAB_BACKLIGHT _IOR('B', 6, size_t) + + +#endif /* _UAPI_LINUX_PMU_H */ diff --git a/include/uapi/linux/poll.h b/include/uapi/linux/poll.h new file mode 100644 index 00000000000..2001fedfb22 --- /dev/null +++ b/include/uapi/linux/poll.h @@ -0,0 +1 @@ +#include <asm/poll.h> diff --git a/include/linux/posix_types.h b/include/uapi/linux/posix_types.h index 988f76e636e..988f76e636e 100644 --- a/include/linux/posix_types.h +++ b/include/uapi/linux/posix_types.h diff --git a/include/linux/ppdev.h b/include/uapi/linux/ppdev.h index dc18c5d23eb..dc18c5d23eb 100644 --- a/include/linux/ppdev.h +++ b/include/uapi/linux/ppdev.h diff --git a/include/uapi/linux/ppp-comp.h b/include/uapi/linux/ppp-comp.h new file mode 100644 index 00000000000..0a15bbb04e1 --- /dev/null +++ b/include/uapi/linux/ppp-comp.h @@ -0,0 +1,93 @@ +/* + * ppp-comp.h - Definitions for doing PPP packet compression. + * + * Copyright 1994-1998 Paul Mackerras. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + */ +#ifndef _UAPI_NET_PPP_COMP_H +#define _UAPI_NET_PPP_COMP_H + + +/* + * CCP codes. + */ + +#define CCP_CONFREQ 1 +#define CCP_CONFACK 2 +#define CCP_TERMREQ 5 +#define CCP_TERMACK 6 +#define CCP_RESETREQ 14 +#define CCP_RESETACK 15 + +/* + * Max # bytes for a CCP option + */ + +#define CCP_MAX_OPTION_LENGTH 32 + +/* + * Parts of a CCP packet. + */ + +#define CCP_CODE(dp) ((dp)[0]) +#define CCP_ID(dp) ((dp)[1]) +#define CCP_LENGTH(dp) (((dp)[2] << 8) + (dp)[3]) +#define CCP_HDRLEN 4 + +#define CCP_OPT_CODE(dp) ((dp)[0]) +#define CCP_OPT_LENGTH(dp) ((dp)[1]) +#define CCP_OPT_MINLEN 2 + +/* + * Definitions for BSD-Compress. + */ + +#define CI_BSD_COMPRESS 21 /* config. option for BSD-Compress */ +#define CILEN_BSD_COMPRESS 3 /* length of config. option */ + +/* Macros for handling the 3rd byte of the BSD-Compress config option. */ +#define BSD_NBITS(x) ((x) & 0x1F) /* number of bits requested */ +#define BSD_VERSION(x) ((x) >> 5) /* version of option format */ +#define BSD_CURRENT_VERSION 1 /* current version number */ +#define BSD_MAKE_OPT(v, n) (((v) << 5) | (n)) + +#define BSD_MIN_BITS 9 /* smallest code size supported */ +#define BSD_MAX_BITS 15 /* largest code size supported */ + +/* + * Definitions for Deflate. + */ + +#define CI_DEFLATE 26 /* config option for Deflate */ +#define CI_DEFLATE_DRAFT 24 /* value used in original draft RFC */ +#define CILEN_DEFLATE 4 /* length of its config option */ + +#define DEFLATE_MIN_SIZE 9 +#define DEFLATE_MAX_SIZE 15 +#define DEFLATE_METHOD_VAL 8 +#define DEFLATE_SIZE(x) (((x) >> 4) + 8) +#define DEFLATE_METHOD(x) ((x) & 0x0F) +#define DEFLATE_MAKE_OPT(w) ((((w) - 8) << 4) + DEFLATE_METHOD_VAL) +#define DEFLATE_CHK_SEQUENCE 0 + +/* + * Definitions for MPPE. + */ + +#define CI_MPPE 18 /* config option for MPPE */ +#define CILEN_MPPE 6 /* length of config option */ + +/* + * Definitions for other, as yet unsupported, compression methods. + */ + +#define CI_PREDICTOR_1 1 /* config option for Predictor-1 */ +#define CILEN_PREDICTOR_1 2 /* length of its config option */ +#define CI_PREDICTOR_2 2 /* config option for Predictor-2 */ +#define CILEN_PREDICTOR_2 2 /* length of its config option */ + + +#endif /* _UAPI_NET_PPP_COMP_H */ diff --git a/include/linux/ppp-ioctl.h b/include/uapi/linux/ppp-ioctl.h index 2d9a8859550..2d9a8859550 100644 --- a/include/linux/ppp-ioctl.h +++ b/include/uapi/linux/ppp-ioctl.h diff --git a/include/uapi/linux/ppp_defs.h b/include/uapi/linux/ppp_defs.h new file mode 100644 index 00000000000..283fc05dbbd --- /dev/null +++ b/include/uapi/linux/ppp_defs.h @@ -0,0 +1,150 @@ +/* + * ppp_defs.h - PPP definitions. + * + * Copyright 1994-2000 Paul Mackerras. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + */ +#include <linux/types.h> + +#ifndef _UAPI_PPP_DEFS_H_ +#define _UAPI_PPP_DEFS_H_ + +/* + * The basic PPP frame. + */ +#define PPP_HDRLEN 4 /* octets for standard ppp header */ +#define PPP_FCSLEN 2 /* octets for FCS */ +#define PPP_MRU 1500 /* default MRU = max length of info field */ + +#define PPP_ADDRESS(p) (((__u8 *)(p))[0]) +#define PPP_CONTROL(p) (((__u8 *)(p))[1]) +#define PPP_PROTOCOL(p) ((((__u8 *)(p))[2] << 8) + ((__u8 *)(p))[3]) + +/* + * Significant octet values. + */ +#define PPP_ALLSTATIONS 0xff /* All-Stations broadcast address */ +#define PPP_UI 0x03 /* Unnumbered Information */ +#define PPP_FLAG 0x7e /* Flag Sequence */ +#define PPP_ESCAPE 0x7d /* Asynchronous Control Escape */ +#define PPP_TRANS 0x20 /* Asynchronous transparency modifier */ + +/* + * Protocol field values. + */ +#define PPP_IP 0x21 /* Internet Protocol */ +#define PPP_AT 0x29 /* AppleTalk Protocol */ +#define PPP_IPX 0x2b /* IPX protocol */ +#define PPP_VJC_COMP 0x2d /* VJ compressed TCP */ +#define PPP_VJC_UNCOMP 0x2f /* VJ uncompressed TCP */ +#define PPP_MP 0x3d /* Multilink protocol */ +#define PPP_IPV6 0x57 /* Internet Protocol Version 6 */ +#define PPP_COMPFRAG 0xfb /* fragment compressed below bundle */ +#define PPP_COMP 0xfd /* compressed packet */ +#define PPP_MPLS_UC 0x0281 /* Multi Protocol Label Switching - Unicast */ +#define PPP_MPLS_MC 0x0283 /* Multi Protocol Label Switching - Multicast */ +#define PPP_IPCP 0x8021 /* IP Control Protocol */ +#define PPP_ATCP 0x8029 /* AppleTalk Control Protocol */ +#define PPP_IPXCP 0x802b /* IPX Control Protocol */ +#define PPP_IPV6CP 0x8057 /* IPv6 Control Protocol */ +#define PPP_CCPFRAG 0x80fb /* CCP at link level (below MP bundle) */ +#define PPP_CCP 0x80fd /* Compression Control Protocol */ +#define PPP_MPLSCP 0x80fd /* MPLS Control Protocol */ +#define PPP_LCP 0xc021 /* Link Control Protocol */ +#define PPP_PAP 0xc023 /* Password Authentication Protocol */ +#define PPP_LQR 0xc025 /* Link Quality Report protocol */ +#define PPP_CHAP 0xc223 /* Cryptographic Handshake Auth. Protocol */ +#define PPP_CBCP 0xc029 /* Callback Control Protocol */ + +/* + * Values for FCS calculations. + */ + +#define PPP_INITFCS 0xffff /* Initial FCS value */ +#define PPP_GOODFCS 0xf0b8 /* Good final FCS value */ + + +/* + * Extended asyncmap - allows any character to be escaped. + */ + +typedef __u32 ext_accm[8]; + +/* + * What to do with network protocol (NP) packets. + */ +enum NPmode { + NPMODE_PASS, /* pass the packet through */ + NPMODE_DROP, /* silently drop the packet */ + NPMODE_ERROR, /* return an error */ + NPMODE_QUEUE /* save it up for later. */ +}; + +/* + * Statistics for LQRP and pppstats + */ +struct pppstat { + __u32 ppp_discards; /* # frames discarded */ + + __u32 ppp_ibytes; /* bytes received */ + __u32 ppp_ioctects; /* bytes received not in error */ + __u32 ppp_ipackets; /* packets received */ + __u32 ppp_ierrors; /* receive errors */ + __u32 ppp_ilqrs; /* # LQR frames received */ + + __u32 ppp_obytes; /* raw bytes sent */ + __u32 ppp_ooctects; /* frame bytes sent */ + __u32 ppp_opackets; /* packets sent */ + __u32 ppp_oerrors; /* transmit errors */ + __u32 ppp_olqrs; /* # LQR frames sent */ +}; + +struct vjstat { + __u32 vjs_packets; /* outbound packets */ + __u32 vjs_compressed; /* outbound compressed packets */ + __u32 vjs_searches; /* searches for connection state */ + __u32 vjs_misses; /* times couldn't find conn. state */ + __u32 vjs_uncompressedin; /* inbound uncompressed packets */ + __u32 vjs_compressedin; /* inbound compressed packets */ + __u32 vjs_errorin; /* inbound unknown type packets */ + __u32 vjs_tossed; /* inbound packets tossed because of error */ +}; + +struct compstat { + __u32 unc_bytes; /* total uncompressed bytes */ + __u32 unc_packets; /* total uncompressed packets */ + __u32 comp_bytes; /* compressed bytes */ + __u32 comp_packets; /* compressed packets */ + __u32 inc_bytes; /* incompressible bytes */ + __u32 inc_packets; /* incompressible packets */ + + /* the compression ratio is defined as in_count / bytes_out */ + __u32 in_count; /* Bytes received */ + __u32 bytes_out; /* Bytes transmitted */ + + double ratio; /* not computed in kernel. */ +}; + +struct ppp_stats { + struct pppstat p; /* basic PPP statistics */ + struct vjstat vj; /* VJ header compression statistics */ +}; + +struct ppp_comp_stats { + struct compstat c; /* packet compression statistics */ + struct compstat d; /* packet decompression statistics */ +}; + +/* + * The following structure records the time in seconds since + * the last NP packet was sent or received. + */ +struct ppp_idle { + __kernel_time_t xmit_idle; /* time since last NP packet sent */ + __kernel_time_t recv_idle; /* time since last NP packet received */ +}; + +#endif /* _UAPI_PPP_DEFS_H_ */ diff --git a/include/linux/pps.h b/include/uapi/linux/pps.h index a9bb1d93451..a9bb1d93451 100644 --- a/include/linux/pps.h +++ b/include/uapi/linux/pps.h diff --git a/include/linux/prctl.h b/include/uapi/linux/prctl.h index 289760f424a..289760f424a 100644 --- a/include/linux/prctl.h +++ b/include/uapi/linux/prctl.h diff --git a/include/linux/ptp_clock.h b/include/uapi/linux/ptp_clock.h index 94e981f810a..94e981f810a 100644 --- a/include/linux/ptp_clock.h +++ b/include/uapi/linux/ptp_clock.h diff --git a/include/uapi/linux/ptrace.h b/include/uapi/linux/ptrace.h new file mode 100644 index 00000000000..1ef6c056a9e --- /dev/null +++ b/include/uapi/linux/ptrace.h @@ -0,0 +1,81 @@ +#ifndef _UAPI_LINUX_PTRACE_H +#define _UAPI_LINUX_PTRACE_H +/* ptrace.h */ +/* structs and defines to help the user use the ptrace system call. */ + +/* has the defines to get at the registers. */ + + +#define PTRACE_TRACEME 0 +#define PTRACE_PEEKTEXT 1 +#define PTRACE_PEEKDATA 2 +#define PTRACE_PEEKUSR 3 +#define PTRACE_POKETEXT 4 +#define PTRACE_POKEDATA 5 +#define PTRACE_POKEUSR 6 +#define PTRACE_CONT 7 +#define PTRACE_KILL 8 +#define PTRACE_SINGLESTEP 9 + +#define PTRACE_ATTACH 16 +#define PTRACE_DETACH 17 + +#define PTRACE_SYSCALL 24 + +/* 0x4200-0x4300 are reserved for architecture-independent additions. */ +#define PTRACE_SETOPTIONS 0x4200 +#define PTRACE_GETEVENTMSG 0x4201 +#define PTRACE_GETSIGINFO 0x4202 +#define PTRACE_SETSIGINFO 0x4203 + +/* + * Generic ptrace interface that exports the architecture specific regsets + * using the corresponding NT_* types (which are also used in the core dump). + * Please note that the NT_PRSTATUS note type in a core dump contains a full + * 'struct elf_prstatus'. But the user_regset for NT_PRSTATUS contains just the + * elf_gregset_t that is the pr_reg field of 'struct elf_prstatus'. For all the + * other user_regset flavors, the user_regset layout and the ELF core dump note + * payload are exactly the same layout. + * + * This interface usage is as follows: + * struct iovec iov = { buf, len}; + * + * ret = ptrace(PTRACE_GETREGSET/PTRACE_SETREGSET, pid, NT_XXX_TYPE, &iov); + * + * On the successful completion, iov.len will be updated by the kernel, + * specifying how much the kernel has written/read to/from the user's iov.buf. + */ +#define PTRACE_GETREGSET 0x4204 +#define PTRACE_SETREGSET 0x4205 + +#define PTRACE_SEIZE 0x4206 +#define PTRACE_INTERRUPT 0x4207 +#define PTRACE_LISTEN 0x4208 + +/* Wait extended result codes for the above trace options. */ +#define PTRACE_EVENT_FORK 1 +#define PTRACE_EVENT_VFORK 2 +#define PTRACE_EVENT_CLONE 3 +#define PTRACE_EVENT_EXEC 4 +#define PTRACE_EVENT_VFORK_DONE 5 +#define PTRACE_EVENT_EXIT 6 +#define PTRACE_EVENT_SECCOMP 7 +/* Extended result codes which enabled by means other than options. */ +#define PTRACE_EVENT_STOP 128 + +/* Options set using PTRACE_SETOPTIONS or using PTRACE_SEIZE @data param */ +#define PTRACE_O_TRACESYSGOOD 1 +#define PTRACE_O_TRACEFORK (1 << PTRACE_EVENT_FORK) +#define PTRACE_O_TRACEVFORK (1 << PTRACE_EVENT_VFORK) +#define PTRACE_O_TRACECLONE (1 << PTRACE_EVENT_CLONE) +#define PTRACE_O_TRACEEXEC (1 << PTRACE_EVENT_EXEC) +#define PTRACE_O_TRACEVFORKDONE (1 << PTRACE_EVENT_VFORK_DONE) +#define PTRACE_O_TRACEEXIT (1 << PTRACE_EVENT_EXIT) +#define PTRACE_O_TRACESECCOMP (1 << PTRACE_EVENT_SECCOMP) + +#define PTRACE_O_MASK 0x000000ff + +#include <asm/ptrace.h> + + +#endif /* _UAPI_LINUX_PTRACE_H */ diff --git a/include/linux/qnx4_fs.h b/include/uapi/linux/qnx4_fs.h index 8b9aee1a9ce..8b9aee1a9ce 100644 --- a/include/linux/qnx4_fs.h +++ b/include/uapi/linux/qnx4_fs.h diff --git a/include/linux/qnxtypes.h b/include/uapi/linux/qnxtypes.h index bebbe5cc4fb..bebbe5cc4fb 100644 --- a/include/linux/qnxtypes.h +++ b/include/uapi/linux/qnxtypes.h diff --git a/include/uapi/linux/quota.h b/include/uapi/linux/quota.h new file mode 100644 index 00000000000..3b6cfbeb086 --- /dev/null +++ b/include/uapi/linux/quota.h @@ -0,0 +1,171 @@ +/* + * Copyright (c) 1982, 1986 Regents of the University of California. + * All rights reserved. + * + * This code is derived from software contributed to Berkeley by + * Robert Elz at The University of Melbourne. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the University nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ + +#ifndef _UAPI_LINUX_QUOTA_ +#define _UAPI_LINUX_QUOTA_ + +#include <linux/errno.h> +#include <linux/types.h> + +#define __DQUOT_VERSION__ "dquot_6.5.2" + +#define MAXQUOTAS 2 +#define USRQUOTA 0 /* element used for user quotas */ +#define GRPQUOTA 1 /* element used for group quotas */ + +/* + * Definitions for the default names of the quotas files. + */ +#define INITQFNAMES { \ + "user", /* USRQUOTA */ \ + "group", /* GRPQUOTA */ \ + "undefined", \ +}; + +/* + * Command definitions for the 'quotactl' system call. + * The commands are broken into a main command defined below + * and a subcommand that is used to convey the type of + * quota that is being manipulated (see above). + */ +#define SUBCMDMASK 0x00ff +#define SUBCMDSHIFT 8 +#define QCMD(cmd, type) (((cmd) << SUBCMDSHIFT) | ((type) & SUBCMDMASK)) + +#define Q_SYNC 0x800001 /* sync disk copy of a filesystems quotas */ +#define Q_QUOTAON 0x800002 /* turn quotas on */ +#define Q_QUOTAOFF 0x800003 /* turn quotas off */ +#define Q_GETFMT 0x800004 /* get quota format used on given filesystem */ +#define Q_GETINFO 0x800005 /* get information about quota files */ +#define Q_SETINFO 0x800006 /* set information about quota files */ +#define Q_GETQUOTA 0x800007 /* get user quota structure */ +#define Q_SETQUOTA 0x800008 /* set user quota structure */ + +/* Quota format type IDs */ +#define QFMT_VFS_OLD 1 +#define QFMT_VFS_V0 2 +#define QFMT_OCFS2 3 +#define QFMT_VFS_V1 4 + +/* Size of block in which space limits are passed through the quota + * interface */ +#define QIF_DQBLKSIZE_BITS 10 +#define QIF_DQBLKSIZE (1 << QIF_DQBLKSIZE_BITS) + +/* + * Quota structure used for communication with userspace via quotactl + * Following flags are used to specify which fields are valid + */ +enum { + QIF_BLIMITS_B = 0, + QIF_SPACE_B, + QIF_ILIMITS_B, + QIF_INODES_B, + QIF_BTIME_B, + QIF_ITIME_B, +}; + +#define QIF_BLIMITS (1 << QIF_BLIMITS_B) +#define QIF_SPACE (1 << QIF_SPACE_B) +#define QIF_ILIMITS (1 << QIF_ILIMITS_B) +#define QIF_INODES (1 << QIF_INODES_B) +#define QIF_BTIME (1 << QIF_BTIME_B) +#define QIF_ITIME (1 << QIF_ITIME_B) +#define QIF_LIMITS (QIF_BLIMITS | QIF_ILIMITS) +#define QIF_USAGE (QIF_SPACE | QIF_INODES) +#define QIF_TIMES (QIF_BTIME | QIF_ITIME) +#define QIF_ALL (QIF_LIMITS | QIF_USAGE | QIF_TIMES) + +struct if_dqblk { + __u64 dqb_bhardlimit; + __u64 dqb_bsoftlimit; + __u64 dqb_curspace; + __u64 dqb_ihardlimit; + __u64 dqb_isoftlimit; + __u64 dqb_curinodes; + __u64 dqb_btime; + __u64 dqb_itime; + __u32 dqb_valid; +}; + +/* + * Structure used for setting quota information about file via quotactl + * Following flags are used to specify which fields are valid + */ +#define IIF_BGRACE 1 +#define IIF_IGRACE 2 +#define IIF_FLAGS 4 +#define IIF_ALL (IIF_BGRACE | IIF_IGRACE | IIF_FLAGS) + +struct if_dqinfo { + __u64 dqi_bgrace; + __u64 dqi_igrace; + __u32 dqi_flags; + __u32 dqi_valid; +}; + +/* + * Definitions for quota netlink interface + */ +#define QUOTA_NL_NOWARN 0 +#define QUOTA_NL_IHARDWARN 1 /* Inode hardlimit reached */ +#define QUOTA_NL_ISOFTLONGWARN 2 /* Inode grace time expired */ +#define QUOTA_NL_ISOFTWARN 3 /* Inode softlimit reached */ +#define QUOTA_NL_BHARDWARN 4 /* Block hardlimit reached */ +#define QUOTA_NL_BSOFTLONGWARN 5 /* Block grace time expired */ +#define QUOTA_NL_BSOFTWARN 6 /* Block softlimit reached */ +#define QUOTA_NL_IHARDBELOW 7 /* Usage got below inode hardlimit */ +#define QUOTA_NL_ISOFTBELOW 8 /* Usage got below inode softlimit */ +#define QUOTA_NL_BHARDBELOW 9 /* Usage got below block hardlimit */ +#define QUOTA_NL_BSOFTBELOW 10 /* Usage got below block softlimit */ + +enum { + QUOTA_NL_C_UNSPEC, + QUOTA_NL_C_WARNING, + __QUOTA_NL_C_MAX, +}; +#define QUOTA_NL_C_MAX (__QUOTA_NL_C_MAX - 1) + +enum { + QUOTA_NL_A_UNSPEC, + QUOTA_NL_A_QTYPE, + QUOTA_NL_A_EXCESS_ID, + QUOTA_NL_A_WARNING, + QUOTA_NL_A_DEV_MAJOR, + QUOTA_NL_A_DEV_MINOR, + QUOTA_NL_A_CAUSED_ID, + __QUOTA_NL_A_MAX, +}; +#define QUOTA_NL_A_MAX (__QUOTA_NL_A_MAX - 1) + + +#endif /* _UAPI_LINUX_QUOTA_ */ diff --git a/include/linux/radeonfb.h b/include/uapi/linux/radeonfb.h index 8c4bbdecc44..8c4bbdecc44 100644 --- a/include/linux/radeonfb.h +++ b/include/uapi/linux/radeonfb.h diff --git a/include/uapi/linux/random.h b/include/uapi/linux/random.h new file mode 100644 index 00000000000..7471b5b3b8b --- /dev/null +++ b/include/uapi/linux/random.h @@ -0,0 +1,50 @@ +/* + * include/linux/random.h + * + * Include file for the random number generator. + */ + +#ifndef _UAPI_LINUX_RANDOM_H +#define _UAPI_LINUX_RANDOM_H + +#include <linux/types.h> +#include <linux/ioctl.h> +#include <linux/irqnr.h> + +/* ioctl()'s for the random number generator */ + +/* Get the entropy count. */ +#define RNDGETENTCNT _IOR( 'R', 0x00, int ) + +/* Add to (or subtract from) the entropy count. (Superuser only.) */ +#define RNDADDTOENTCNT _IOW( 'R', 0x01, int ) + +/* Get the contents of the entropy pool. (Superuser only.) */ +#define RNDGETPOOL _IOR( 'R', 0x02, int [2] ) + +/* + * Write bytes into the entropy pool and add to the entropy count. + * (Superuser only.) + */ +#define RNDADDENTROPY _IOW( 'R', 0x03, int [2] ) + +/* Clear entropy count to 0. (Superuser only.) */ +#define RNDZAPENTCNT _IO( 'R', 0x04 ) + +/* Clear the entropy pool and associated counters. (Superuser only.) */ +#define RNDCLEARPOOL _IO( 'R', 0x06 ) + +struct rand_pool_info { + int entropy_count; + int buf_size; + __u32 buf[0]; +}; + +struct rnd_state { + __u32 s1, s2, s3; +}; + +/* Exported functions */ + + +#endif /* _UAPI_LINUX_RANDOM_H */ diff --git a/include/linux/raw.h b/include/uapi/linux/raw.h index 62d543e7060..62d543e7060 100644 --- a/include/linux/raw.h +++ b/include/uapi/linux/raw.h diff --git a/include/linux/rds.h b/include/uapi/linux/rds.h index 91950950aa5..91950950aa5 100644 --- a/include/linux/rds.h +++ b/include/uapi/linux/rds.h diff --git a/include/uapi/linux/reboot.h b/include/uapi/linux/reboot.h new file mode 100644 index 00000000000..09d056d4fc5 --- /dev/null +++ b/include/uapi/linux/reboot.h @@ -0,0 +1,39 @@ +#ifndef _UAPI_LINUX_REBOOT_H +#define _UAPI_LINUX_REBOOT_H + +/* + * Magic values required to use _reboot() system call. + */ + +#define LINUX_REBOOT_MAGIC1 0xfee1dead +#define LINUX_REBOOT_MAGIC2 672274793 +#define LINUX_REBOOT_MAGIC2A 85072278 +#define LINUX_REBOOT_MAGIC2B 369367448 +#define LINUX_REBOOT_MAGIC2C 537993216 + + +/* + * Commands accepted by the _reboot() system call. + * + * RESTART Restart system using default command and mode. + * HALT Stop OS and give system control to ROM monitor, if any. + * CAD_ON Ctrl-Alt-Del sequence causes RESTART command. + * CAD_OFF Ctrl-Alt-Del sequence sends SIGINT to init task. + * POWER_OFF Stop OS and remove all power from system, if possible. + * RESTART2 Restart system using given command string. + * SW_SUSPEND Suspend system using software suspend if compiled in. + * KEXEC Restart system using a previously loaded Linux kernel + */ + +#define LINUX_REBOOT_CMD_RESTART 0x01234567 +#define LINUX_REBOOT_CMD_HALT 0xCDEF0123 +#define LINUX_REBOOT_CMD_CAD_ON 0x89ABCDEF +#define LINUX_REBOOT_CMD_CAD_OFF 0x00000000 +#define LINUX_REBOOT_CMD_POWER_OFF 0x4321FEDC +#define LINUX_REBOOT_CMD_RESTART2 0xA1B2C3D4 +#define LINUX_REBOOT_CMD_SW_SUSPEND 0xD000FCE2 +#define LINUX_REBOOT_CMD_KEXEC 0x45584543 + + + +#endif /* _UAPI_LINUX_REBOOT_H */ diff --git a/include/linux/reiserfs_fs.h b/include/uapi/linux/reiserfs_fs.h index ea3700cd736..ea3700cd736 100644 --- a/include/linux/reiserfs_fs.h +++ b/include/uapi/linux/reiserfs_fs.h diff --git a/include/linux/reiserfs_xattr.h b/include/uapi/linux/reiserfs_xattr.h index d8ce17c2459..d8ce17c2459 100644 --- a/include/linux/reiserfs_xattr.h +++ b/include/uapi/linux/reiserfs_xattr.h diff --git a/include/uapi/linux/resource.h b/include/uapi/linux/resource.h new file mode 100644 index 00000000000..e0ed28477f4 --- /dev/null +++ b/include/uapi/linux/resource.h @@ -0,0 +1,80 @@ +#ifndef _UAPI_LINUX_RESOURCE_H +#define _UAPI_LINUX_RESOURCE_H + +#include <linux/time.h> +#include <linux/types.h> + +/* + * Resource control/accounting header file for linux + */ + +/* + * Definition of struct rusage taken from BSD 4.3 Reno + * + * We don't support all of these yet, but we might as well have them.... + * Otherwise, each time we add new items, programs which depend on this + * structure will lose. This reduces the chances of that happening. + */ +#define RUSAGE_SELF 0 +#define RUSAGE_CHILDREN (-1) +#define RUSAGE_BOTH (-2) /* sys_wait4() uses this */ +#define RUSAGE_THREAD 1 /* only the calling thread */ + +struct rusage { + struct timeval ru_utime; /* user time used */ + struct timeval ru_stime; /* system time used */ + long ru_maxrss; /* maximum resident set size */ + long ru_ixrss; /* integral shared memory size */ + long ru_idrss; /* integral unshared data size */ + long ru_isrss; /* integral unshared stack size */ + long ru_minflt; /* page reclaims */ + long ru_majflt; /* page faults */ + long ru_nswap; /* swaps */ + long ru_inblock; /* block input operations */ + long ru_oublock; /* block output operations */ + long ru_msgsnd; /* messages sent */ + long ru_msgrcv; /* messages received */ + long ru_nsignals; /* signals received */ + long ru_nvcsw; /* voluntary context switches */ + long ru_nivcsw; /* involuntary " */ +}; + +struct rlimit { + unsigned long rlim_cur; + unsigned long rlim_max; +}; + +#define RLIM64_INFINITY (~0ULL) + +struct rlimit64 { + __u64 rlim_cur; + __u64 rlim_max; +}; + +#define PRIO_MIN (-20) +#define PRIO_MAX 20 + +#define PRIO_PROCESS 0 +#define PRIO_PGRP 1 +#define PRIO_USER 2 + +/* + * Limit the stack by to some sane default: root can always + * increase this limit if needed.. 8MB seems reasonable. + */ +#define _STK_LIM (8*1024*1024) + +/* + * GPG2 wants 64kB of mlocked memory, to make sure pass phrases + * and other sensitive information are never written to disk. + */ +#define MLOCK_LIMIT ((PAGE_SIZE > 64*1024) ? PAGE_SIZE : 64*1024) + +/* + * Due to binary compatibility, the actual resource numbers + * may be different for different linux versions.. + */ +#include <asm/resource.h> + + +#endif /* _UAPI_LINUX_RESOURCE_H */ diff --git a/include/uapi/linux/rfkill.h b/include/uapi/linux/rfkill.h new file mode 100644 index 00000000000..2753c6cc974 --- /dev/null +++ b/include/uapi/linux/rfkill.h @@ -0,0 +1,107 @@ +/* + * Copyright (C) 2006 - 2007 Ivo van Doorn + * Copyright (C) 2007 Dmitry Torokhov + * Copyright 2009 Johannes Berg <johannes@sipsolutions.net> + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ +#ifndef _UAPI__RFKILL_H +#define _UAPI__RFKILL_H + + +#include <linux/types.h> + +/* define userspace visible states */ +#define RFKILL_STATE_SOFT_BLOCKED 0 +#define RFKILL_STATE_UNBLOCKED 1 +#define RFKILL_STATE_HARD_BLOCKED 2 + +/** + * enum rfkill_type - type of rfkill switch. + * + * @RFKILL_TYPE_ALL: toggles all switches (requests only - not a switch type) + * @RFKILL_TYPE_WLAN: switch is on a 802.11 wireless network device. + * @RFKILL_TYPE_BLUETOOTH: switch is on a bluetooth device. + * @RFKILL_TYPE_UWB: switch is on a ultra wideband device. + * @RFKILL_TYPE_WIMAX: switch is on a WiMAX device. + * @RFKILL_TYPE_WWAN: switch is on a wireless WAN device. + * @RFKILL_TYPE_GPS: switch is on a GPS device. + * @RFKILL_TYPE_FM: switch is on a FM radio device. + * @NUM_RFKILL_TYPES: number of defined rfkill types + */ +enum rfkill_type { + RFKILL_TYPE_ALL = 0, + RFKILL_TYPE_WLAN, + RFKILL_TYPE_BLUETOOTH, + RFKILL_TYPE_UWB, + RFKILL_TYPE_WIMAX, + RFKILL_TYPE_WWAN, + RFKILL_TYPE_GPS, + RFKILL_TYPE_FM, + NUM_RFKILL_TYPES, +}; + +/** + * enum rfkill_operation - operation types + * @RFKILL_OP_ADD: a device was added + * @RFKILL_OP_DEL: a device was removed + * @RFKILL_OP_CHANGE: a device's state changed -- userspace changes one device + * @RFKILL_OP_CHANGE_ALL: userspace changes all devices (of a type, or all) + */ +enum rfkill_operation { + RFKILL_OP_ADD = 0, + RFKILL_OP_DEL, + RFKILL_OP_CHANGE, + RFKILL_OP_CHANGE_ALL, +}; + +/** + * struct rfkill_event - events for userspace on /dev/rfkill + * @idx: index of dev rfkill + * @type: type of the rfkill struct + * @op: operation code + * @hard: hard state (0/1) + * @soft: soft state (0/1) + * + * Structure used for userspace communication on /dev/rfkill, + * used for events from the kernel and control to the kernel. + */ +struct rfkill_event { + __u32 idx; + __u8 type; + __u8 op; + __u8 soft, hard; +} __attribute__((packed)); + +/* + * We are planning to be backward and forward compatible with changes + * to the event struct, by adding new, optional, members at the end. + * When reading an event (whether the kernel from userspace or vice + * versa) we need to accept anything that's at least as large as the + * version 1 event size, but might be able to accept other sizes in + * the future. + * + * One exception is the kernel -- we already have two event sizes in + * that we've made the 'hard' member optional since our only option + * is to ignore it anyway. + */ +#define RFKILL_EVENT_SIZE_V1 8 + +/* ioctl for turning off rfkill-input (if present) */ +#define RFKILL_IOC_MAGIC 'R' +#define RFKILL_IOC_NOINPUT 1 +#define RFKILL_IOCTL_NOINPUT _IO(RFKILL_IOC_MAGIC, RFKILL_IOC_NOINPUT) + +/* and that's all userspace gets */ + +#endif /* _UAPI__RFKILL_H */ diff --git a/include/linux/romfs_fs.h b/include/uapi/linux/romfs_fs.h index 5f57f93b284..5f57f93b284 100644 --- a/include/linux/romfs_fs.h +++ b/include/uapi/linux/romfs_fs.h diff --git a/include/linux/rose.h b/include/uapi/linux/rose.h index 1fcfe95893b..1fcfe95893b 100644 --- a/include/linux/rose.h +++ b/include/uapi/linux/rose.h diff --git a/include/linux/route.h b/include/uapi/linux/route.h index 6600708311c..6600708311c 100644 --- a/include/linux/route.h +++ b/include/uapi/linux/route.h diff --git a/include/uapi/linux/rtc.h b/include/uapi/linux/rtc.h new file mode 100644 index 00000000000..f8c82e6f25d --- /dev/null +++ b/include/uapi/linux/rtc.h @@ -0,0 +1,107 @@ +/* + * Generic RTC interface. + * This version contains the part of the user interface to the Real Time Clock + * service. It is used with both the legacy mc146818 and also EFI + * Struct rtc_time and first 12 ioctl by Paul Gortmaker, 1996 - separated out + * from <linux/mc146818rtc.h> to this file for 2.4 kernels. + * + * Copyright (C) 1999 Hewlett-Packard Co. + * Copyright (C) 1999 Stephane Eranian <eranian@hpl.hp.com> + */ +#ifndef _UAPI_LINUX_RTC_H_ +#define _UAPI_LINUX_RTC_H_ + +/* + * The struct used to pass data via the following ioctl. Similar to the + * struct tm in <time.h>, but it needs to be here so that the kernel + * source is self contained, allowing cross-compiles, etc. etc. + */ + +struct rtc_time { + int tm_sec; + int tm_min; + int tm_hour; + int tm_mday; + int tm_mon; + int tm_year; + int tm_wday; + int tm_yday; + int tm_isdst; +}; + +/* + * This data structure is inspired by the EFI (v0.92) wakeup + * alarm API. + */ +struct rtc_wkalrm { + unsigned char enabled; /* 0 = alarm disabled, 1 = alarm enabled */ + unsigned char pending; /* 0 = alarm not pending, 1 = alarm pending */ + struct rtc_time time; /* time the alarm is set to */ +}; + +/* + * Data structure to control PLL correction some better RTC feature + * pll_value is used to get or set current value of correction, + * the rest of the struct is used to query HW capabilities. + * This is modeled after the RTC used in Q40/Q60 computers but + * should be sufficiently flexible for other devices + * + * +ve pll_value means clock will run faster by + * pll_value*pll_posmult/pll_clock + * -ve pll_value means clock will run slower by + * pll_value*pll_negmult/pll_clock + */ + +struct rtc_pll_info { + int pll_ctrl; /* placeholder for fancier control */ + int pll_value; /* get/set correction value */ + int pll_max; /* max +ve (faster) adjustment value */ + int pll_min; /* max -ve (slower) adjustment value */ + int pll_posmult; /* factor for +ve correction */ + int pll_negmult; /* factor for -ve correction */ + long pll_clock; /* base PLL frequency */ +}; + +/* + * ioctl calls that are permitted to the /dev/rtc interface, if + * any of the RTC drivers are enabled. + */ + +#define RTC_AIE_ON _IO('p', 0x01) /* Alarm int. enable on */ +#define RTC_AIE_OFF _IO('p', 0x02) /* ... off */ +#define RTC_UIE_ON _IO('p', 0x03) /* Update int. enable on */ +#define RTC_UIE_OFF _IO('p', 0x04) /* ... off */ +#define RTC_PIE_ON _IO('p', 0x05) /* Periodic int. enable on */ +#define RTC_PIE_OFF _IO('p', 0x06) /* ... off */ +#define RTC_WIE_ON _IO('p', 0x0f) /* Watchdog int. enable on */ +#define RTC_WIE_OFF _IO('p', 0x10) /* ... off */ + +#define RTC_ALM_SET _IOW('p', 0x07, struct rtc_time) /* Set alarm time */ +#define RTC_ALM_READ _IOR('p', 0x08, struct rtc_time) /* Read alarm time */ +#define RTC_RD_TIME _IOR('p', 0x09, struct rtc_time) /* Read RTC time */ +#define RTC_SET_TIME _IOW('p', 0x0a, struct rtc_time) /* Set RTC time */ +#define RTC_IRQP_READ _IOR('p', 0x0b, unsigned long) /* Read IRQ rate */ +#define RTC_IRQP_SET _IOW('p', 0x0c, unsigned long) /* Set IRQ rate */ +#define RTC_EPOCH_READ _IOR('p', 0x0d, unsigned long) /* Read epoch */ +#define RTC_EPOCH_SET _IOW('p', 0x0e, unsigned long) /* Set epoch */ + +#define RTC_WKALM_SET _IOW('p', 0x0f, struct rtc_wkalrm)/* Set wakeup alarm*/ +#define RTC_WKALM_RD _IOR('p', 0x10, struct rtc_wkalrm)/* Get wakeup alarm*/ + +#define RTC_PLL_GET _IOR('p', 0x11, struct rtc_pll_info) /* Get PLL correction */ +#define RTC_PLL_SET _IOW('p', 0x12, struct rtc_pll_info) /* Set PLL correction */ + +#define RTC_VL_READ _IOR('p', 0x13, int) /* Voltage low detector */ +#define RTC_VL_CLR _IO('p', 0x14) /* Clear voltage low information */ + +/* interrupt flags */ +#define RTC_IRQF 0x80 /* Any of the following is active */ +#define RTC_PF 0x40 /* Periodic interrupt */ +#define RTC_AF 0x20 /* Alarm interrupt */ +#define RTC_UF 0x10 /* Update interrupt for 1Hz RTC */ + + +#define RTC_MAX_FREQ 8192 + + +#endif /* _UAPI_LINUX_RTC_H_ */ diff --git a/include/uapi/linux/rtnetlink.h b/include/uapi/linux/rtnetlink.h new file mode 100644 index 00000000000..fcd768b09f6 --- /dev/null +++ b/include/uapi/linux/rtnetlink.h @@ -0,0 +1,612 @@ +#ifndef _UAPI__LINUX_RTNETLINK_H +#define _UAPI__LINUX_RTNETLINK_H + +#include <linux/types.h> +#include <linux/netlink.h> +#include <linux/if_link.h> +#include <linux/if_addr.h> +#include <linux/neighbour.h> + +/* rtnetlink families. Values up to 127 are reserved for real address + * families, values above 128 may be used arbitrarily. + */ +#define RTNL_FAMILY_IPMR 128 +#define RTNL_FAMILY_IP6MR 129 +#define RTNL_FAMILY_MAX 129 + +/**** + * Routing/neighbour discovery messages. + ****/ + +/* Types of messages */ + +enum { + RTM_BASE = 16, +#define RTM_BASE RTM_BASE + + RTM_NEWLINK = 16, +#define RTM_NEWLINK RTM_NEWLINK + RTM_DELLINK, +#define RTM_DELLINK RTM_DELLINK + RTM_GETLINK, +#define RTM_GETLINK RTM_GETLINK + RTM_SETLINK, +#define RTM_SETLINK RTM_SETLINK + + RTM_NEWADDR = 20, +#define RTM_NEWADDR RTM_NEWADDR + RTM_DELADDR, +#define RTM_DELADDR RTM_DELADDR + RTM_GETADDR, +#define RTM_GETADDR RTM_GETADDR + + RTM_NEWROUTE = 24, +#define RTM_NEWROUTE RTM_NEWROUTE + RTM_DELROUTE, +#define RTM_DELROUTE RTM_DELROUTE + RTM_GETROUTE, +#define RTM_GETROUTE RTM_GETROUTE + + RTM_NEWNEIGH = 28, +#define RTM_NEWNEIGH RTM_NEWNEIGH + RTM_DELNEIGH, +#define RTM_DELNEIGH RTM_DELNEIGH + RTM_GETNEIGH, +#define RTM_GETNEIGH RTM_GETNEIGH + + RTM_NEWRULE = 32, +#define RTM_NEWRULE RTM_NEWRULE + RTM_DELRULE, +#define RTM_DELRULE RTM_DELRULE + RTM_GETRULE, +#define RTM_GETRULE RTM_GETRULE + + RTM_NEWQDISC = 36, +#define RTM_NEWQDISC RTM_NEWQDISC + RTM_DELQDISC, +#define RTM_DELQDISC RTM_DELQDISC + RTM_GETQDISC, +#define RTM_GETQDISC RTM_GETQDISC + + RTM_NEWTCLASS = 40, +#define RTM_NEWTCLASS RTM_NEWTCLASS + RTM_DELTCLASS, +#define RTM_DELTCLASS RTM_DELTCLASS + RTM_GETTCLASS, +#define RTM_GETTCLASS RTM_GETTCLASS + + RTM_NEWTFILTER = 44, +#define RTM_NEWTFILTER RTM_NEWTFILTER + RTM_DELTFILTER, +#define RTM_DELTFILTER RTM_DELTFILTER + RTM_GETTFILTER, +#define RTM_GETTFILTER RTM_GETTFILTER + + RTM_NEWACTION = 48, +#define RTM_NEWACTION RTM_NEWACTION + RTM_DELACTION, +#define RTM_DELACTION RTM_DELACTION + RTM_GETACTION, +#define RTM_GETACTION RTM_GETACTION + + RTM_NEWPREFIX = 52, +#define RTM_NEWPREFIX RTM_NEWPREFIX + + RTM_GETMULTICAST = 58, +#define RTM_GETMULTICAST RTM_GETMULTICAST + + RTM_GETANYCAST = 62, +#define RTM_GETANYCAST RTM_GETANYCAST + + RTM_NEWNEIGHTBL = 64, +#define RTM_NEWNEIGHTBL RTM_NEWNEIGHTBL + RTM_GETNEIGHTBL = 66, +#define RTM_GETNEIGHTBL RTM_GETNEIGHTBL + RTM_SETNEIGHTBL, +#define RTM_SETNEIGHTBL RTM_SETNEIGHTBL + + RTM_NEWNDUSEROPT = 68, +#define RTM_NEWNDUSEROPT RTM_NEWNDUSEROPT + + RTM_NEWADDRLABEL = 72, +#define RTM_NEWADDRLABEL RTM_NEWADDRLABEL + RTM_DELADDRLABEL, +#define RTM_DELADDRLABEL RTM_DELADDRLABEL + RTM_GETADDRLABEL, +#define RTM_GETADDRLABEL RTM_GETADDRLABEL + + RTM_GETDCB = 78, +#define RTM_GETDCB RTM_GETDCB + RTM_SETDCB, +#define RTM_SETDCB RTM_SETDCB + + __RTM_MAX, +#define RTM_MAX (((__RTM_MAX + 3) & ~3) - 1) +}; + +#define RTM_NR_MSGTYPES (RTM_MAX + 1 - RTM_BASE) +#define RTM_NR_FAMILIES (RTM_NR_MSGTYPES >> 2) +#define RTM_FAM(cmd) (((cmd) - RTM_BASE) >> 2) + +/* + Generic structure for encapsulation of optional route information. + It is reminiscent of sockaddr, but with sa_family replaced + with attribute type. + */ + +struct rtattr { + unsigned short rta_len; + unsigned short rta_type; +}; + +/* Macros to handle rtattributes */ + +#define RTA_ALIGNTO 4 +#define RTA_ALIGN(len) ( ((len)+RTA_ALIGNTO-1) & ~(RTA_ALIGNTO-1) ) +#define RTA_OK(rta,len) ((len) >= (int)sizeof(struct rtattr) && \ + (rta)->rta_len >= sizeof(struct rtattr) && \ + (rta)->rta_len <= (len)) +#define RTA_NEXT(rta,attrlen) ((attrlen) -= RTA_ALIGN((rta)->rta_len), \ + (struct rtattr*)(((char*)(rta)) + RTA_ALIGN((rta)->rta_len))) +#define RTA_LENGTH(len) (RTA_ALIGN(sizeof(struct rtattr)) + (len)) +#define RTA_SPACE(len) RTA_ALIGN(RTA_LENGTH(len)) +#define RTA_DATA(rta) ((void*)(((char*)(rta)) + RTA_LENGTH(0))) +#define RTA_PAYLOAD(rta) ((int)((rta)->rta_len) - RTA_LENGTH(0)) + + + + +/****************************************************************************** + * Definitions used in routing table administration. + ****/ + +struct rtmsg { + unsigned char rtm_family; + unsigned char rtm_dst_len; + unsigned char rtm_src_len; + unsigned char rtm_tos; + + unsigned char rtm_table; /* Routing table id */ + unsigned char rtm_protocol; /* Routing protocol; see below */ + unsigned char rtm_scope; /* See below */ + unsigned char rtm_type; /* See below */ + + unsigned rtm_flags; +}; + +/* rtm_type */ + +enum { + RTN_UNSPEC, + RTN_UNICAST, /* Gateway or direct route */ + RTN_LOCAL, /* Accept locally */ + RTN_BROADCAST, /* Accept locally as broadcast, + send as broadcast */ + RTN_ANYCAST, /* Accept locally as broadcast, + but send as unicast */ + RTN_MULTICAST, /* Multicast route */ + RTN_BLACKHOLE, /* Drop */ + RTN_UNREACHABLE, /* Destination is unreachable */ + RTN_PROHIBIT, /* Administratively prohibited */ + RTN_THROW, /* Not in this table */ + RTN_NAT, /* Translate this address */ + RTN_XRESOLVE, /* Use external resolver */ + __RTN_MAX +}; + +#define RTN_MAX (__RTN_MAX - 1) + + +/* rtm_protocol */ + +#define RTPROT_UNSPEC 0 +#define RTPROT_REDIRECT 1 /* Route installed by ICMP redirects; + not used by current IPv4 */ +#define RTPROT_KERNEL 2 /* Route installed by kernel */ +#define RTPROT_BOOT 3 /* Route installed during boot */ +#define RTPROT_STATIC 4 /* Route installed by administrator */ + +/* Values of protocol >= RTPROT_STATIC are not interpreted by kernel; + they are just passed from user and back as is. + It will be used by hypothetical multiple routing daemons. + Note that protocol values should be standardized in order to + avoid conflicts. + */ + +#define RTPROT_GATED 8 /* Apparently, GateD */ +#define RTPROT_RA 9 /* RDISC/ND router advertisements */ +#define RTPROT_MRT 10 /* Merit MRT */ +#define RTPROT_ZEBRA 11 /* Zebra */ +#define RTPROT_BIRD 12 /* BIRD */ +#define RTPROT_DNROUTED 13 /* DECnet routing daemon */ +#define RTPROT_XORP 14 /* XORP */ +#define RTPROT_NTK 15 /* Netsukuku */ +#define RTPROT_DHCP 16 /* DHCP client */ + +/* rtm_scope + + Really it is not scope, but sort of distance to the destination. + NOWHERE are reserved for not existing destinations, HOST is our + local addresses, LINK are destinations, located on directly attached + link and UNIVERSE is everywhere in the Universe. + + Intermediate values are also possible f.e. interior routes + could be assigned a value between UNIVERSE and LINK. +*/ + +enum rt_scope_t { + RT_SCOPE_UNIVERSE=0, +/* User defined values */ + RT_SCOPE_SITE=200, + RT_SCOPE_LINK=253, + RT_SCOPE_HOST=254, + RT_SCOPE_NOWHERE=255 +}; + +/* rtm_flags */ + +#define RTM_F_NOTIFY 0x100 /* Notify user of route change */ +#define RTM_F_CLONED 0x200 /* This route is cloned */ +#define RTM_F_EQUALIZE 0x400 /* Multipath equalizer: NI */ +#define RTM_F_PREFIX 0x800 /* Prefix addresses */ + +/* Reserved table identifiers */ + +enum rt_class_t { + RT_TABLE_UNSPEC=0, +/* User defined values */ + RT_TABLE_COMPAT=252, + RT_TABLE_DEFAULT=253, + RT_TABLE_MAIN=254, + RT_TABLE_LOCAL=255, + RT_TABLE_MAX=0xFFFFFFFF +}; + + +/* Routing message attributes */ + +enum rtattr_type_t { + RTA_UNSPEC, + RTA_DST, + RTA_SRC, + RTA_IIF, + RTA_OIF, + RTA_GATEWAY, + RTA_PRIORITY, + RTA_PREFSRC, + RTA_METRICS, + RTA_MULTIPATH, + RTA_PROTOINFO, /* no longer used */ + RTA_FLOW, + RTA_CACHEINFO, + RTA_SESSION, /* no longer used */ + RTA_MP_ALGO, /* no longer used */ + RTA_TABLE, + RTA_MARK, + __RTA_MAX +}; + +#define RTA_MAX (__RTA_MAX - 1) + +#define RTM_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct rtmsg)))) +#define RTM_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct rtmsg)) + +/* RTM_MULTIPATH --- array of struct rtnexthop. + * + * "struct rtnexthop" describes all necessary nexthop information, + * i.e. parameters of path to a destination via this nexthop. + * + * At the moment it is impossible to set different prefsrc, mtu, window + * and rtt for different paths from multipath. + */ + +struct rtnexthop { + unsigned short rtnh_len; + unsigned char rtnh_flags; + unsigned char rtnh_hops; + int rtnh_ifindex; +}; + +/* rtnh_flags */ + +#define RTNH_F_DEAD 1 /* Nexthop is dead (used by multipath) */ +#define RTNH_F_PERVASIVE 2 /* Do recursive gateway lookup */ +#define RTNH_F_ONLINK 4 /* Gateway is forced on link */ + +/* Macros to handle hexthops */ + +#define RTNH_ALIGNTO 4 +#define RTNH_ALIGN(len) ( ((len)+RTNH_ALIGNTO-1) & ~(RTNH_ALIGNTO-1) ) +#define RTNH_OK(rtnh,len) ((rtnh)->rtnh_len >= sizeof(struct rtnexthop) && \ + ((int)(rtnh)->rtnh_len) <= (len)) +#define RTNH_NEXT(rtnh) ((struct rtnexthop*)(((char*)(rtnh)) + RTNH_ALIGN((rtnh)->rtnh_len))) +#define RTNH_LENGTH(len) (RTNH_ALIGN(sizeof(struct rtnexthop)) + (len)) +#define RTNH_SPACE(len) RTNH_ALIGN(RTNH_LENGTH(len)) +#define RTNH_DATA(rtnh) ((struct rtattr*)(((char*)(rtnh)) + RTNH_LENGTH(0))) + +/* RTM_CACHEINFO */ + +struct rta_cacheinfo { + __u32 rta_clntref; + __u32 rta_lastuse; + __s32 rta_expires; + __u32 rta_error; + __u32 rta_used; + +#define RTNETLINK_HAVE_PEERINFO 1 + __u32 rta_id; + __u32 rta_ts; + __u32 rta_tsage; +}; + +/* RTM_METRICS --- array of struct rtattr with types of RTAX_* */ + +enum { + RTAX_UNSPEC, +#define RTAX_UNSPEC RTAX_UNSPEC + RTAX_LOCK, +#define RTAX_LOCK RTAX_LOCK + RTAX_MTU, +#define RTAX_MTU RTAX_MTU + RTAX_WINDOW, +#define RTAX_WINDOW RTAX_WINDOW + RTAX_RTT, +#define RTAX_RTT RTAX_RTT + RTAX_RTTVAR, +#define RTAX_RTTVAR RTAX_RTTVAR + RTAX_SSTHRESH, +#define RTAX_SSTHRESH RTAX_SSTHRESH + RTAX_CWND, +#define RTAX_CWND RTAX_CWND + RTAX_ADVMSS, +#define RTAX_ADVMSS RTAX_ADVMSS + RTAX_REORDERING, +#define RTAX_REORDERING RTAX_REORDERING + RTAX_HOPLIMIT, +#define RTAX_HOPLIMIT RTAX_HOPLIMIT + RTAX_INITCWND, +#define RTAX_INITCWND RTAX_INITCWND + RTAX_FEATURES, +#define RTAX_FEATURES RTAX_FEATURES + RTAX_RTO_MIN, +#define RTAX_RTO_MIN RTAX_RTO_MIN + RTAX_INITRWND, +#define RTAX_INITRWND RTAX_INITRWND + __RTAX_MAX +}; + +#define RTAX_MAX (__RTAX_MAX - 1) + +#define RTAX_FEATURE_ECN 0x00000001 +#define RTAX_FEATURE_SACK 0x00000002 +#define RTAX_FEATURE_TIMESTAMP 0x00000004 +#define RTAX_FEATURE_ALLFRAG 0x00000008 + +struct rta_session { + __u8 proto; + __u8 pad1; + __u16 pad2; + + union { + struct { + __u16 sport; + __u16 dport; + } ports; + + struct { + __u8 type; + __u8 code; + __u16 ident; + } icmpt; + + __u32 spi; + } u; +}; + +/**** + * General form of address family dependent message. + ****/ + +struct rtgenmsg { + unsigned char rtgen_family; +}; + +/***************************************************************** + * Link layer specific messages. + ****/ + +/* struct ifinfomsg + * passes link level specific information, not dependent + * on network protocol. + */ + +struct ifinfomsg { + unsigned char ifi_family; + unsigned char __ifi_pad; + unsigned short ifi_type; /* ARPHRD_* */ + int ifi_index; /* Link index */ + unsigned ifi_flags; /* IFF_* flags */ + unsigned ifi_change; /* IFF_* change mask */ +}; + +/******************************************************************** + * prefix information + ****/ + +struct prefixmsg { + unsigned char prefix_family; + unsigned char prefix_pad1; + unsigned short prefix_pad2; + int prefix_ifindex; + unsigned char prefix_type; + unsigned char prefix_len; + unsigned char prefix_flags; + unsigned char prefix_pad3; +}; + +enum +{ + PREFIX_UNSPEC, + PREFIX_ADDRESS, + PREFIX_CACHEINFO, + __PREFIX_MAX +}; + +#define PREFIX_MAX (__PREFIX_MAX - 1) + +struct prefix_cacheinfo { + __u32 preferred_time; + __u32 valid_time; +}; + + +/***************************************************************** + * Traffic control messages. + ****/ + +struct tcmsg { + unsigned char tcm_family; + unsigned char tcm__pad1; + unsigned short tcm__pad2; + int tcm_ifindex; + __u32 tcm_handle; + __u32 tcm_parent; + __u32 tcm_info; +}; + +enum { + TCA_UNSPEC, + TCA_KIND, + TCA_OPTIONS, + TCA_STATS, + TCA_XSTATS, + TCA_RATE, + TCA_FCNT, + TCA_STATS2, + TCA_STAB, + __TCA_MAX +}; + +#define TCA_MAX (__TCA_MAX - 1) + +#define TCA_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct tcmsg)))) +#define TCA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct tcmsg)) + +/******************************************************************** + * Neighbor Discovery userland options + ****/ + +struct nduseroptmsg { + unsigned char nduseropt_family; + unsigned char nduseropt_pad1; + unsigned short nduseropt_opts_len; /* Total length of options */ + int nduseropt_ifindex; + __u8 nduseropt_icmp_type; + __u8 nduseropt_icmp_code; + unsigned short nduseropt_pad2; + unsigned int nduseropt_pad3; + /* Followed by one or more ND options */ +}; + +enum { + NDUSEROPT_UNSPEC, + NDUSEROPT_SRCADDR, + __NDUSEROPT_MAX +}; + +#define NDUSEROPT_MAX (__NDUSEROPT_MAX - 1) + +#ifndef __KERNEL__ +/* RTnetlink multicast groups - backwards compatibility for userspace */ +#define RTMGRP_LINK 1 +#define RTMGRP_NOTIFY 2 +#define RTMGRP_NEIGH 4 +#define RTMGRP_TC 8 + +#define RTMGRP_IPV4_IFADDR 0x10 +#define RTMGRP_IPV4_MROUTE 0x20 +#define RTMGRP_IPV4_ROUTE 0x40 +#define RTMGRP_IPV4_RULE 0x80 + +#define RTMGRP_IPV6_IFADDR 0x100 +#define RTMGRP_IPV6_MROUTE 0x200 +#define RTMGRP_IPV6_ROUTE 0x400 +#define RTMGRP_IPV6_IFINFO 0x800 + +#define RTMGRP_DECnet_IFADDR 0x1000 +#define RTMGRP_DECnet_ROUTE 0x4000 + +#define RTMGRP_IPV6_PREFIX 0x20000 +#endif + +/* RTnetlink multicast groups */ +enum rtnetlink_groups { + RTNLGRP_NONE, +#define RTNLGRP_NONE RTNLGRP_NONE + RTNLGRP_LINK, +#define RTNLGRP_LINK RTNLGRP_LINK + RTNLGRP_NOTIFY, +#define RTNLGRP_NOTIFY RTNLGRP_NOTIFY + RTNLGRP_NEIGH, +#define RTNLGRP_NEIGH RTNLGRP_NEIGH + RTNLGRP_TC, +#define RTNLGRP_TC RTNLGRP_TC + RTNLGRP_IPV4_IFADDR, +#define RTNLGRP_IPV4_IFADDR RTNLGRP_IPV4_IFADDR + RTNLGRP_IPV4_MROUTE, +#define RTNLGRP_IPV4_MROUTE RTNLGRP_IPV4_MROUTE + RTNLGRP_IPV4_ROUTE, +#define RTNLGRP_IPV4_ROUTE RTNLGRP_IPV4_ROUTE + RTNLGRP_IPV4_RULE, +#define RTNLGRP_IPV4_RULE RTNLGRP_IPV4_RULE + RTNLGRP_IPV6_IFADDR, +#define RTNLGRP_IPV6_IFADDR RTNLGRP_IPV6_IFADDR + RTNLGRP_IPV6_MROUTE, +#define RTNLGRP_IPV6_MROUTE RTNLGRP_IPV6_MROUTE + RTNLGRP_IPV6_ROUTE, +#define RTNLGRP_IPV6_ROUTE RTNLGRP_IPV6_ROUTE + RTNLGRP_IPV6_IFINFO, +#define RTNLGRP_IPV6_IFINFO RTNLGRP_IPV6_IFINFO + RTNLGRP_DECnet_IFADDR, +#define RTNLGRP_DECnet_IFADDR RTNLGRP_DECnet_IFADDR + RTNLGRP_NOP2, + RTNLGRP_DECnet_ROUTE, +#define RTNLGRP_DECnet_ROUTE RTNLGRP_DECnet_ROUTE + RTNLGRP_DECnet_RULE, +#define RTNLGRP_DECnet_RULE RTNLGRP_DECnet_RULE + RTNLGRP_NOP4, + RTNLGRP_IPV6_PREFIX, +#define RTNLGRP_IPV6_PREFIX RTNLGRP_IPV6_PREFIX + RTNLGRP_IPV6_RULE, +#define RTNLGRP_IPV6_RULE RTNLGRP_IPV6_RULE + RTNLGRP_ND_USEROPT, +#define RTNLGRP_ND_USEROPT RTNLGRP_ND_USEROPT + RTNLGRP_PHONET_IFADDR, +#define RTNLGRP_PHONET_IFADDR RTNLGRP_PHONET_IFADDR + RTNLGRP_PHONET_ROUTE, +#define RTNLGRP_PHONET_ROUTE RTNLGRP_PHONET_ROUTE + RTNLGRP_DCB, +#define RTNLGRP_DCB RTNLGRP_DCB + __RTNLGRP_MAX +}; +#define RTNLGRP_MAX (__RTNLGRP_MAX - 1) + +/* TC action piece */ +struct tcamsg { + unsigned char tca_family; + unsigned char tca__pad1; + unsigned short tca__pad2; +}; +#define TA_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct tcamsg)))) +#define TA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct tcamsg)) +#define TCA_ACT_TAB 1 /* attr type must be >=1 */ +#define TCAA_MAX 1 + +/* New extended info filters for IFLA_EXT_MASK */ +#define RTEXT_FILTER_VF (1 << 0) + +/* End of information exported to user level */ + + + +#endif /* _UAPI__LINUX_RTNETLINK_H */ diff --git a/include/uapi/linux/scc.h b/include/uapi/linux/scc.h new file mode 100644 index 00000000000..72b6b815337 --- /dev/null +++ b/include/uapi/linux/scc.h @@ -0,0 +1,172 @@ +/* $Id: scc.h,v 1.29 1997/04/02 14:56:45 jreuter Exp jreuter $ */ + +#ifndef _UAPI_SCC_H +#define _UAPI_SCC_H + + +/* selection of hardware types */ + +#define PA0HZP 0x00 /* hardware type for PA0HZP SCC card and compatible */ +#define EAGLE 0x01 /* hardware type for EAGLE card */ +#define PC100 0x02 /* hardware type for PC100 card */ +#define PRIMUS 0x04 /* hardware type for PRIMUS-PC (DG9BL) card */ +#define DRSI 0x08 /* hardware type for DRSI PC*Packet card */ +#define BAYCOM 0x10 /* hardware type for BayCom (U)SCC */ + +/* DEV ioctl() commands */ + +enum SCC_ioctl_cmds { + SIOCSCCRESERVED = SIOCDEVPRIVATE, + SIOCSCCCFG, + SIOCSCCINI, + SIOCSCCCHANINI, + SIOCSCCSMEM, + SIOCSCCGKISS, + SIOCSCCSKISS, + SIOCSCCGSTAT, + SIOCSCCCAL +}; + +/* Device parameter control (from WAMPES) */ + +enum L1_params { + PARAM_DATA, + PARAM_TXDELAY, + PARAM_PERSIST, + PARAM_SLOTTIME, + PARAM_TXTAIL, + PARAM_FULLDUP, + PARAM_SOFTDCD, /* was: PARAM_HW */ + PARAM_MUTE, /* ??? */ + PARAM_DTR, + PARAM_RTS, + PARAM_SPEED, + PARAM_ENDDELAY, /* ??? */ + PARAM_GROUP, + PARAM_IDLE, + PARAM_MIN, + PARAM_MAXKEY, + PARAM_WAIT, + PARAM_MAXDEFER, + PARAM_TX, + PARAM_HWEVENT = 31, + PARAM_RETURN = 255 /* reset kiss mode */ +}; + +/* fulldup parameter */ + +enum FULLDUP_modes { + KISS_DUPLEX_HALF, /* normal CSMA operation */ + KISS_DUPLEX_FULL, /* fullduplex, key down trx after transmission */ + KISS_DUPLEX_LINK, /* fullduplex, key down trx after 'idletime' sec */ + KISS_DUPLEX_OPTIMA /* fullduplex, let the protocol layer control the hw */ +}; + +/* misc. parameters */ + +#define TIMER_OFF 65535U /* to switch off timers */ +#define NO_SUCH_PARAM 65534U /* param not implemented */ + +/* HWEVENT parameter */ + +enum HWEVENT_opts { + HWEV_DCD_ON, + HWEV_DCD_OFF, + HWEV_ALL_SENT +}; + +/* channel grouping */ + +#define RXGROUP 0100 /* if set, only tx when all channels clear */ +#define TXGROUP 0200 /* if set, don't transmit simultaneously */ + +/* Tx/Rx clock sources */ + +enum CLOCK_sources { + CLK_DPLL, /* normal halfduplex operation */ + CLK_EXTERNAL, /* external clocking (G3RUH/DF9IC modems) */ + CLK_DIVIDER, /* Rx = DPLL, Tx = divider (fullduplex with */ + /* modems without clock regeneration */ + CLK_BRG /* experimental fullduplex mode with DPLL/BRG for */ + /* MODEMs without clock recovery */ +}; + +/* Tx state */ + +enum TX_state { + TXS_IDLE, /* Transmitter off, no data pending */ + TXS_BUSY, /* waiting for permission to send / tailtime */ + TXS_ACTIVE, /* Transmitter on, sending data */ + TXS_NEWFRAME, /* reset CRC and send (next) frame */ + TXS_IDLE2, /* Transmitter on, no data pending */ + TXS_WAIT, /* Waiting for Mintime to expire */ + TXS_TIMEOUT /* We had a transmission timeout */ +}; + +typedef unsigned long io_port; /* type definition for an 'io port address' */ + +/* SCC statistical information */ + +struct scc_stat { + long rxints; /* Receiver interrupts */ + long txints; /* Transmitter interrupts */ + long exints; /* External/status interrupts */ + long spints; /* Special receiver interrupts */ + + long txframes; /* Packets sent */ + long rxframes; /* Number of Frames Actually Received */ + long rxerrs; /* CRC Errors */ + long txerrs; /* KISS errors */ + + unsigned int nospace; /* "Out of buffers" */ + unsigned int rx_over; /* Receiver Overruns */ + unsigned int tx_under; /* Transmitter Underruns */ + + unsigned int tx_state; /* Transmitter state */ + int tx_queued; /* tx frames enqueued */ + + unsigned int maxqueue; /* allocated tx_buffers */ + unsigned int bufsize; /* used buffersize */ +}; + +struct scc_modem { + long speed; /* Line speed, bps */ + char clocksrc; /* 0 = DPLL, 1 = external, 2 = divider */ + char nrz; /* NRZ instead of NRZI */ +}; + +struct scc_kiss_cmd { + int command; /* one of the KISS-Commands defined above */ + unsigned param; /* KISS-Param */ +}; + +struct scc_hw_config { + io_port data_a; /* data port channel A */ + io_port ctrl_a; /* control port channel A */ + io_port data_b; /* data port channel B */ + io_port ctrl_b; /* control port channel B */ + io_port vector_latch; /* INTACK-Latch (#) */ + io_port special; /* special function port */ + + int irq; /* irq */ + long clock; /* clock */ + char option; /* command for function port */ + + char brand; /* hardware type */ + char escc; /* use ext. features of a 8580/85180/85280 */ +}; + +/* (#) only one INTACK latch allowed. */ + + +struct scc_mem_config { + unsigned int dummy; + unsigned int bufsize; +}; + +struct scc_calibrate { + unsigned int time; + unsigned char pattern; +}; + +#endif /* _UAPI_SCC_H */ diff --git a/include/uapi/linux/sched.h b/include/uapi/linux/sched.h new file mode 100644 index 00000000000..5a0f945927a --- /dev/null +++ b/include/uapi/linux/sched.h @@ -0,0 +1,46 @@ +#ifndef _UAPI_LINUX_SCHED_H +#define _UAPI_LINUX_SCHED_H + +/* + * cloning flags: + */ +#define CSIGNAL 0x000000ff /* signal mask to be sent at exit */ +#define CLONE_VM 0x00000100 /* set if VM shared between processes */ +#define CLONE_FS 0x00000200 /* set if fs info shared between processes */ +#define CLONE_FILES 0x00000400 /* set if open files shared between processes */ +#define CLONE_SIGHAND 0x00000800 /* set if signal handlers and blocked signals shared */ +#define CLONE_PTRACE 0x00002000 /* set if we want to let tracing continue on the child too */ +#define CLONE_VFORK 0x00004000 /* set if the parent wants the child to wake it up on mm_release */ +#define CLONE_PARENT 0x00008000 /* set if we want to have the same parent as the cloner */ +#define CLONE_THREAD 0x00010000 /* Same thread group? */ +#define CLONE_NEWNS 0x00020000 /* New namespace group? */ +#define CLONE_SYSVSEM 0x00040000 /* share system V SEM_UNDO semantics */ +#define CLONE_SETTLS 0x00080000 /* create a new TLS for the child */ +#define CLONE_PARENT_SETTID 0x00100000 /* set the TID in the parent */ +#define CLONE_CHILD_CLEARTID 0x00200000 /* clear the TID in the child */ +#define CLONE_DETACHED 0x00400000 /* Unused, ignored */ +#define CLONE_UNTRACED 0x00800000 /* set if the tracing process can't force CLONE_PTRACE on this clone */ +#define CLONE_CHILD_SETTID 0x01000000 /* set the TID in the child */ +/* 0x02000000 was previously the unused CLONE_STOPPED (Start in stopped state) + and is now available for re-use. */ +#define CLONE_NEWUTS 0x04000000 /* New utsname group? */ +#define CLONE_NEWIPC 0x08000000 /* New ipcs */ +#define CLONE_NEWUSER 0x10000000 /* New user namespace */ +#define CLONE_NEWPID 0x20000000 /* New pid namespace */ +#define CLONE_NEWNET 0x40000000 /* New network namespace */ +#define CLONE_IO 0x80000000 /* Clone io context */ + +/* + * Scheduling policies + */ +#define SCHED_NORMAL 0 +#define SCHED_FIFO 1 +#define SCHED_RR 2 +#define SCHED_BATCH 3 +/* SCHED_ISO: reserved but not implemented yet */ +#define SCHED_IDLE 5 +/* Can be ORed in to make sure the process is reverted back to SCHED_NORMAL on fork */ +#define SCHED_RESET_ON_FORK 0x40000000 + + +#endif /* _UAPI_LINUX_SCHED_H */ diff --git a/include/uapi/linux/screen_info.h b/include/uapi/linux/screen_info.h new file mode 100644 index 00000000000..7530e744762 --- /dev/null +++ b/include/uapi/linux/screen_info.h @@ -0,0 +1,74 @@ +#ifndef _UAPI_SCREEN_INFO_H +#define _UAPI_SCREEN_INFO_H + +#include <linux/types.h> + +/* + * These are set up by the setup-routine at boot-time: + */ + +struct screen_info { + __u8 orig_x; /* 0x00 */ + __u8 orig_y; /* 0x01 */ + __u16 ext_mem_k; /* 0x02 */ + __u16 orig_video_page; /* 0x04 */ + __u8 orig_video_mode; /* 0x06 */ + __u8 orig_video_cols; /* 0x07 */ + __u8 flags; /* 0x08 */ + __u8 unused2; /* 0x09 */ + __u16 orig_video_ega_bx;/* 0x0a */ + __u16 unused3; /* 0x0c */ + __u8 orig_video_lines; /* 0x0e */ + __u8 orig_video_isVGA; /* 0x0f */ + __u16 orig_video_points;/* 0x10 */ + + /* VESA graphic mode -- linear frame buffer */ + __u16 lfb_width; /* 0x12 */ + __u16 lfb_height; /* 0x14 */ + __u16 lfb_depth; /* 0x16 */ + __u32 lfb_base; /* 0x18 */ + __u32 lfb_size; /* 0x1c */ + __u16 cl_magic, cl_offset; /* 0x20 */ + __u16 lfb_linelength; /* 0x24 */ + __u8 red_size; /* 0x26 */ + __u8 red_pos; /* 0x27 */ + __u8 green_size; /* 0x28 */ + __u8 green_pos; /* 0x29 */ + __u8 blue_size; /* 0x2a */ + __u8 blue_pos; /* 0x2b */ + __u8 rsvd_size; /* 0x2c */ + __u8 rsvd_pos; /* 0x2d */ + __u16 vesapm_seg; /* 0x2e */ + __u16 vesapm_off; /* 0x30 */ + __u16 pages; /* 0x32 */ + __u16 vesa_attributes; /* 0x34 */ + __u32 capabilities; /* 0x36 */ + __u8 _reserved[6]; /* 0x3a */ +} __attribute__((packed)); + +#define VIDEO_TYPE_MDA 0x10 /* Monochrome Text Display */ +#define VIDEO_TYPE_CGA 0x11 /* CGA Display */ +#define VIDEO_TYPE_EGAM 0x20 /* EGA/VGA in Monochrome Mode */ +#define VIDEO_TYPE_EGAC 0x21 /* EGA in Color Mode */ +#define VIDEO_TYPE_VGAC 0x22 /* VGA+ in Color Mode */ +#define VIDEO_TYPE_VLFB 0x23 /* VESA VGA in graphic mode */ + +#define VIDEO_TYPE_PICA_S3 0x30 /* ACER PICA-61 local S3 video */ +#define VIDEO_TYPE_MIPS_G364 0x31 /* MIPS Magnum 4000 G364 video */ +#define VIDEO_TYPE_SGI 0x33 /* Various SGI graphics hardware */ + +#define VIDEO_TYPE_TGAC 0x40 /* DEC TGA */ + +#define VIDEO_TYPE_SUN 0x50 /* Sun frame buffer. */ +#define VIDEO_TYPE_SUNPCI 0x51 /* Sun PCI based frame buffer. */ + +#define VIDEO_TYPE_PMAC 0x60 /* PowerMacintosh frame buffer. */ + +#define VIDEO_TYPE_EFI 0x70 /* EFI graphic mode */ + +#define VIDEO_FLAGS_NOCURSOR (1 << 0) /* The video mode has no cursor set */ + +#define VIDEO_CAPABILITY_SKIP_QUIRKS (1 << 0) + + +#endif /* _UAPI_SCREEN_INFO_H */ diff --git a/include/uapi/linux/sdla.h b/include/uapi/linux/sdla.h new file mode 100644 index 00000000000..95eaff9c9e4 --- /dev/null +++ b/include/uapi/linux/sdla.h @@ -0,0 +1,116 @@ +/* + * INET An implementation of the TCP/IP protocol suite for the LINUX + * operating system. INET is implemented using the BSD Socket + * interface as the means of communication with the user level. + * + * Global definitions for the Frame relay interface. + * + * Version: @(#)if_ifrad.h 0.20 13 Apr 96 + * + * Author: Mike McLagan <mike.mclagan@linux.org> + * + * Changes: + * 0.15 Mike McLagan Structure packing + * + * 0.20 Mike McLagan New flags for S508 buffer handling + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _UAPISDLA_H +#define _UAPISDLA_H + +/* adapter type */ +#define SDLA_TYPES +#define SDLA_S502A 5020 +#define SDLA_S502E 5021 +#define SDLA_S503 5030 +#define SDLA_S507 5070 +#define SDLA_S508 5080 +#define SDLA_S509 5090 +#define SDLA_UNKNOWN -1 + +/* port selection flags for the S508 */ +#define SDLA_S508_PORT_V35 0x00 +#define SDLA_S508_PORT_RS232 0x02 + +/* Z80 CPU speeds */ +#define SDLA_CPU_3M 0x00 +#define SDLA_CPU_5M 0x01 +#define SDLA_CPU_7M 0x02 +#define SDLA_CPU_8M 0x03 +#define SDLA_CPU_10M 0x04 +#define SDLA_CPU_16M 0x05 +#define SDLA_CPU_12M 0x06 + +/* some private IOCTLs */ +#define SDLA_IDENTIFY (FRAD_LAST_IOCTL + 1) +#define SDLA_CPUSPEED (FRAD_LAST_IOCTL + 2) +#define SDLA_PROTOCOL (FRAD_LAST_IOCTL + 3) + +#define SDLA_CLEARMEM (FRAD_LAST_IOCTL + 4) +#define SDLA_WRITEMEM (FRAD_LAST_IOCTL + 5) +#define SDLA_READMEM (FRAD_LAST_IOCTL + 6) + +struct sdla_mem { + int addr; + int len; + void __user *data; +}; + +#define SDLA_START (FRAD_LAST_IOCTL + 7) +#define SDLA_STOP (FRAD_LAST_IOCTL + 8) + +/* some offsets in the Z80's memory space */ +#define SDLA_NMIADDR 0x0000 +#define SDLA_CONF_ADDR 0x0010 +#define SDLA_S502A_NMIADDR 0x0066 +#define SDLA_CODE_BASEADDR 0x0100 +#define SDLA_WINDOW_SIZE 0x2000 +#define SDLA_ADDR_MASK 0x1FFF + +/* largest handleable block of data */ +#define SDLA_MAX_DATA 4080 +#define SDLA_MAX_MTU 4072 /* MAX_DATA - sizeof(fradhdr) */ +#define SDLA_MAX_DLCI 24 + +/* this should be the same as frad_conf */ +struct sdla_conf { + short station; + short config; + short kbaud; + short clocking; + short max_frm; + short T391; + short T392; + short N391; + short N392; + short N393; + short CIR_fwd; + short Bc_fwd; + short Be_fwd; + short CIR_bwd; + short Bc_bwd; + short Be_bwd; +}; + +/* this should be the same as dlci_conf */ +struct sdla_dlci_conf { + short config; + short CIR_fwd; + short Bc_fwd; + short Be_fwd; + short CIR_bwd; + short Bc_bwd; + short Be_bwd; + short Tc_fwd; + short Tc_bwd; + short Tf_max; + short Tb_max; +}; + + +#endif /* _UAPISDLA_H */ diff --git a/include/uapi/linux/seccomp.h b/include/uapi/linux/seccomp.h new file mode 100644 index 00000000000..ac2dc9f7297 --- /dev/null +++ b/include/uapi/linux/seccomp.h @@ -0,0 +1,47 @@ +#ifndef _UAPI_LINUX_SECCOMP_H +#define _UAPI_LINUX_SECCOMP_H + +#include <linux/compiler.h> +#include <linux/types.h> + + +/* Valid values for seccomp.mode and prctl(PR_SET_SECCOMP, <mode>) */ +#define SECCOMP_MODE_DISABLED 0 /* seccomp is not in use. */ +#define SECCOMP_MODE_STRICT 1 /* uses hard-coded filter. */ +#define SECCOMP_MODE_FILTER 2 /* uses user-supplied filter. */ + +/* + * All BPF programs must return a 32-bit value. + * The bottom 16-bits are for optional return data. + * The upper 16-bits are ordered from least permissive values to most. + * + * The ordering ensures that a min_t() over composed return values always + * selects the least permissive choice. + */ +#define SECCOMP_RET_KILL 0x00000000U /* kill the task immediately */ +#define SECCOMP_RET_TRAP 0x00030000U /* disallow and force a SIGSYS */ +#define SECCOMP_RET_ERRNO 0x00050000U /* returns an errno */ +#define SECCOMP_RET_TRACE 0x7ff00000U /* pass to a tracer or disallow */ +#define SECCOMP_RET_ALLOW 0x7fff0000U /* allow */ + +/* Masks for the return value sections. */ +#define SECCOMP_RET_ACTION 0x7fff0000U +#define SECCOMP_RET_DATA 0x0000ffffU + +/** + * struct seccomp_data - the format the BPF program executes over. + * @nr: the system call number + * @arch: indicates system call convention as an AUDIT_ARCH_* value + * as defined in <linux/audit.h>. + * @instruction_pointer: at the time of the system call. + * @args: up to 6 system call arguments always stored as 64-bit values + * regardless of the architecture. + */ +struct seccomp_data { + int nr; + __u32 arch; + __u64 instruction_pointer; + __u64 args[6]; +}; + +#endif /* _UAPI_LINUX_SECCOMP_H */ diff --git a/include/uapi/linux/securebits.h b/include/uapi/linux/securebits.h new file mode 100644 index 00000000000..985aac9e6bf --- /dev/null +++ b/include/uapi/linux/securebits.h @@ -0,0 +1,51 @@ +#ifndef _UAPI_LINUX_SECUREBITS_H +#define _UAPI_LINUX_SECUREBITS_H + +/* Each securesetting is implemented using two bits. One bit specifies + whether the setting is on or off. The other bit specify whether the + setting is locked or not. A setting which is locked cannot be + changed from user-level. */ +#define issecure_mask(X) (1 << (X)) + +#define SECUREBITS_DEFAULT 0x00000000 + +/* When set UID 0 has no special privileges. When unset, we support + inheritance of root-permissions and suid-root executable under + compatibility mode. We raise the effective and inheritable bitmasks + *of the executable file* if the effective uid of the new process is + 0. If the real uid is 0, we raise the effective (legacy) bit of the + executable file. */ +#define SECURE_NOROOT 0 +#define SECURE_NOROOT_LOCKED 1 /* make bit-0 immutable */ + +#define SECBIT_NOROOT (issecure_mask(SECURE_NOROOT)) +#define SECBIT_NOROOT_LOCKED (issecure_mask(SECURE_NOROOT_LOCKED)) + +/* When set, setuid to/from uid 0 does not trigger capability-"fixup". + When unset, to provide compatiblility with old programs relying on + set*uid to gain/lose privilege, transitions to/from uid 0 cause + capabilities to be gained/lost. */ +#define SECURE_NO_SETUID_FIXUP 2 +#define SECURE_NO_SETUID_FIXUP_LOCKED 3 /* make bit-2 immutable */ + +#define SECBIT_NO_SETUID_FIXUP (issecure_mask(SECURE_NO_SETUID_FIXUP)) +#define SECBIT_NO_SETUID_FIXUP_LOCKED \ + (issecure_mask(SECURE_NO_SETUID_FIXUP_LOCKED)) + +/* When set, a process can retain its capabilities even after + transitioning to a non-root user (the set-uid fixup suppressed by + bit 2). Bit-4 is cleared when a process calls exec(); setting both + bit 4 and 5 will create a barrier through exec that no exec()'d + child can use this feature again. */ +#define SECURE_KEEP_CAPS 4 +#define SECURE_KEEP_CAPS_LOCKED 5 /* make bit-4 immutable */ + +#define SECBIT_KEEP_CAPS (issecure_mask(SECURE_KEEP_CAPS)) +#define SECBIT_KEEP_CAPS_LOCKED (issecure_mask(SECURE_KEEP_CAPS_LOCKED)) + +#define SECURE_ALL_BITS (issecure_mask(SECURE_NOROOT) | \ + issecure_mask(SECURE_NO_SETUID_FIXUP) | \ + issecure_mask(SECURE_KEEP_CAPS)) +#define SECURE_ALL_LOCKS (SECURE_ALL_BITS << 1) + +#endif /* _UAPI_LINUX_SECUREBITS_H */ diff --git a/include/linux/selinux_netlink.h b/include/uapi/linux/selinux_netlink.h index d239797785c..d239797785c 100644 --- a/include/linux/selinux_netlink.h +++ b/include/uapi/linux/selinux_netlink.h diff --git a/include/uapi/linux/sem.h b/include/uapi/linux/sem.h new file mode 100644 index 00000000000..541fce03b50 --- /dev/null +++ b/include/uapi/linux/sem.h @@ -0,0 +1,80 @@ +#ifndef _UAPI_LINUX_SEM_H +#define _UAPI_LINUX_SEM_H + +#include <linux/ipc.h> + +/* semop flags */ +#define SEM_UNDO 0x1000 /* undo the operation on exit */ + +/* semctl Command Definitions. */ +#define GETPID 11 /* get sempid */ +#define GETVAL 12 /* get semval */ +#define GETALL 13 /* get all semval's */ +#define GETNCNT 14 /* get semncnt */ +#define GETZCNT 15 /* get semzcnt */ +#define SETVAL 16 /* set semval */ +#define SETALL 17 /* set all semval's */ + +/* ipcs ctl cmds */ +#define SEM_STAT 18 +#define SEM_INFO 19 + +/* Obsolete, used only for backwards compatibility and libc5 compiles */ +struct semid_ds { + struct ipc_perm sem_perm; /* permissions .. see ipc.h */ + __kernel_time_t sem_otime; /* last semop time */ + __kernel_time_t sem_ctime; /* last change time */ + struct sem *sem_base; /* ptr to first semaphore in array */ + struct sem_queue *sem_pending; /* pending operations to be processed */ + struct sem_queue **sem_pending_last; /* last pending operation */ + struct sem_undo *undo; /* undo requests on this array */ + unsigned short sem_nsems; /* no. of semaphores in array */ +}; + +/* Include the definition of semid64_ds */ +#include <asm/sembuf.h> + +/* semop system calls takes an array of these. */ +struct sembuf { + unsigned short sem_num; /* semaphore index in array */ + short sem_op; /* semaphore operation */ + short sem_flg; /* operation flags */ +}; + +/* arg for semctl system calls. */ +union semun { + int val; /* value for SETVAL */ + struct semid_ds __user *buf; /* buffer for IPC_STAT & IPC_SET */ + unsigned short __user *array; /* array for GETALL & SETALL */ + struct seminfo __user *__buf; /* buffer for IPC_INFO */ + void __user *__pad; +}; + +struct seminfo { + int semmap; + int semmni; + int semmns; + int semmnu; + int semmsl; + int semopm; + int semume; + int semusz; + int semvmx; + int semaem; +}; + +#define SEMMNI 128 /* <= IPCMNI max # of semaphore identifiers */ +#define SEMMSL 250 /* <= 8 000 max num of semaphores per id */ +#define SEMMNS (SEMMNI*SEMMSL) /* <= INT_MAX max # of semaphores in system */ +#define SEMOPM 32 /* <= 1 000 max num of ops per semop call */ +#define SEMVMX 32767 /* <= 32767 semaphore maximum value */ +#define SEMAEM SEMVMX /* adjust on exit max value */ + +/* unused */ +#define SEMUME SEMOPM /* max num of undo entries per process */ +#define SEMMNU SEMMNS /* num of undo structures system wide */ +#define SEMMAP SEMMNS /* # of entries in semaphore map */ +#define SEMUSZ 20 /* sizeof struct sem_undo */ + + +#endif /* _UAPI_LINUX_SEM_H */ diff --git a/include/uapi/linux/serial.h b/include/uapi/linux/serial.h new file mode 100644 index 00000000000..5e0d0ed61cf --- /dev/null +++ b/include/uapi/linux/serial.h @@ -0,0 +1,126 @@ +/* + * include/linux/serial.h + * + * Copyright (C) 1992 by Theodore Ts'o. + * + * Redistribution of this file is permitted under the terms of the GNU + * Public License (GPL) + */ + +#ifndef _UAPI_LINUX_SERIAL_H +#define _UAPI_LINUX_SERIAL_H + +#include <linux/types.h> + +#include <linux/tty_flags.h> + + +struct serial_struct { + int type; + int line; + unsigned int port; + int irq; + int flags; + int xmit_fifo_size; + int custom_divisor; + int baud_base; + unsigned short close_delay; + char io_type; + char reserved_char[1]; + int hub6; + unsigned short closing_wait; /* time to wait before closing */ + unsigned short closing_wait2; /* no longer used... */ + unsigned char *iomem_base; + unsigned short iomem_reg_shift; + unsigned int port_high; + unsigned long iomap_base; /* cookie passed into ioremap */ +}; + +/* + * For the close wait times, 0 means wait forever for serial port to + * flush its output. 65535 means don't wait at all. + */ +#define ASYNC_CLOSING_WAIT_INF 0 +#define ASYNC_CLOSING_WAIT_NONE 65535 + +/* + * These are the supported serial types. + */ +#define PORT_UNKNOWN 0 +#define PORT_8250 1 +#define PORT_16450 2 +#define PORT_16550 3 +#define PORT_16550A 4 +#define PORT_CIRRUS 5 /* usurped by cyclades.c */ +#define PORT_16650 6 +#define PORT_16650V2 7 +#define PORT_16750 8 +#define PORT_STARTECH 9 /* usurped by cyclades.c */ +#define PORT_16C950 10 /* Oxford Semiconductor */ +#define PORT_16654 11 +#define PORT_16850 12 +#define PORT_RSA 13 /* RSA-DV II/S card */ +#define PORT_MAX 13 + +#define SERIAL_IO_PORT 0 +#define SERIAL_IO_HUB6 1 +#define SERIAL_IO_MEM 2 + +#define UART_CLEAR_FIFO 0x01 +#define UART_USE_FIFO 0x02 +#define UART_STARTECH 0x04 +#define UART_NATSEMI 0x08 + + +/* + * Multiport serial configuration structure --- external structure + */ +struct serial_multiport_struct { + int irq; + int port1; + unsigned char mask1, match1; + int port2; + unsigned char mask2, match2; + int port3; + unsigned char mask3, match3; + int port4; + unsigned char mask4, match4; + int port_monitor; + int reserved[32]; +}; + +/* + * Serial input interrupt line counters -- external structure + * Four lines can interrupt: CTS, DSR, RI, DCD + */ +struct serial_icounter_struct { + int cts, dsr, rng, dcd; + int rx, tx; + int frame, overrun, parity, brk; + int buf_overrun; + int reserved[9]; +}; + +/* + * Serial interface for controlling RS485 settings on chips with suitable + * support. Set with TIOCSRS485 and get with TIOCGRS485 if supported by your + * platform. The set function returns the new state, with any unsupported bits + * reverted appropriately. + */ + +struct serial_rs485 { + __u32 flags; /* RS485 feature flags */ +#define SER_RS485_ENABLED (1 << 0) /* If enabled */ +#define SER_RS485_RTS_ON_SEND (1 << 1) /* Logical level for + RTS pin when + sending */ +#define SER_RS485_RTS_AFTER_SEND (1 << 2) /* Logical level for + RTS pin after sent*/ +#define SER_RS485_RX_DURING_TX (1 << 4) + __u32 delay_rts_before_send; /* Delay before send (milliseconds) */ + __u32 delay_rts_after_send; /* Delay after send (milliseconds) */ + __u32 padding[5]; /* Memory is cheap, new structs + are a royal PITA .. */ +}; + +#endif /* _UAPI_LINUX_SERIAL_H */ diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h new file mode 100644 index 00000000000..7e1ab20adc0 --- /dev/null +++ b/include/uapi/linux/serial_core.h @@ -0,0 +1,219 @@ +/* + * linux/drivers/char/serial_core.h + * + * Copyright (C) 2000 Deep Blue Solutions Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _UAPILINUX_SERIAL_CORE_H +#define _UAPILINUX_SERIAL_CORE_H + +#include <linux/serial.h> + +/* + * The type definitions. These are from Ted Ts'o's serial.h + */ +#define PORT_UNKNOWN 0 +#define PORT_8250 1 +#define PORT_16450 2 +#define PORT_16550 3 +#define PORT_16550A 4 +#define PORT_CIRRUS 5 +#define PORT_16650 6 +#define PORT_16650V2 7 +#define PORT_16750 8 +#define PORT_STARTECH 9 +#define PORT_16C950 10 +#define PORT_16654 11 +#define PORT_16850 12 +#define PORT_RSA 13 +#define PORT_NS16550A 14 +#define PORT_XSCALE 15 +#define PORT_RM9000 16 /* PMC-Sierra RM9xxx internal UART */ +#define PORT_OCTEON 17 /* Cavium OCTEON internal UART */ +#define PORT_AR7 18 /* Texas Instruments AR7 internal UART */ +#define PORT_U6_16550A 19 /* ST-Ericsson U6xxx internal UART */ +#define PORT_TEGRA 20 /* NVIDIA Tegra internal UART */ +#define PORT_XR17D15X 21 /* Exar XR17D15x UART */ +#define PORT_LPC3220 22 /* NXP LPC32xx SoC "Standard" UART */ +#define PORT_8250_CIR 23 /* CIR infrared port, has its own driver */ +#define PORT_MAX_8250 23 /* max port ID */ + +/* + * ARM specific type numbers. These are not currently guaranteed + * to be implemented, and will change in the future. These are + * separate so any additions to the old serial.c that occur before + * we are merged can be easily merged here. + */ +#define PORT_PXA 31 +#define PORT_AMBA 32 +#define PORT_CLPS711X 33 +#define PORT_SA1100 34 +#define PORT_UART00 35 +#define PORT_21285 37 + +/* Sparc type numbers. */ +#define PORT_SUNZILOG 38 +#define PORT_SUNSAB 39 + +/* DEC */ +#define PORT_DZ 46 +#define PORT_ZS 47 + +/* Parisc type numbers. */ +#define PORT_MUX 48 + +/* Atmel AT91 / AT32 SoC */ +#define PORT_ATMEL 49 + +/* Macintosh Zilog type numbers */ +#define PORT_MAC_ZILOG 50 /* m68k : not yet implemented */ +#define PORT_PMAC_ZILOG 51 + +/* SH-SCI */ +#define PORT_SCI 52 +#define PORT_SCIF 53 +#define PORT_IRDA 54 + +/* Samsung S3C2410 SoC and derivatives thereof */ +#define PORT_S3C2410 55 + +/* SGI IP22 aka Indy / Challenge S / Indigo 2 */ +#define PORT_IP22ZILOG 56 + +/* Sharp LH7a40x -- an ARM9 SoC series */ +#define PORT_LH7A40X 57 + +/* PPC CPM type number */ +#define PORT_CPM 58 + +/* MPC52xx (and MPC512x) type numbers */ +#define PORT_MPC52xx 59 + +/* IBM icom */ +#define PORT_ICOM 60 + +/* Samsung S3C2440 SoC */ +#define PORT_S3C2440 61 + +/* Motorola i.MX SoC */ +#define PORT_IMX 62 + +/* Marvell MPSC */ +#define PORT_MPSC 63 + +/* TXX9 type number */ +#define PORT_TXX9 64 + +/* NEC VR4100 series SIU/DSIU */ +#define PORT_VR41XX_SIU 65 +#define PORT_VR41XX_DSIU 66 + +/* Samsung S3C2400 SoC */ +#define PORT_S3C2400 67 + +/* M32R SIO */ +#define PORT_M32R_SIO 68 + +/*Digi jsm */ +#define PORT_JSM 69 + +#define PORT_PNX8XXX 70 + +/* Hilscher netx */ +#define PORT_NETX 71 + +/* SUN4V Hypervisor Console */ +#define PORT_SUNHV 72 + +#define PORT_S3C2412 73 + +/* Xilinx uartlite */ +#define PORT_UARTLITE 74 + +/* Blackfin bf5xx */ +#define PORT_BFIN 75 + +/* Micrel KS8695 */ +#define PORT_KS8695 76 + +/* Broadcom SB1250, etc. SOC */ +#define PORT_SB1250_DUART 77 + +/* Freescale ColdFire */ +#define PORT_MCF 78 + +/* Blackfin SPORT */ +#define PORT_BFIN_SPORT 79 + +/* MN10300 on-chip UART numbers */ +#define PORT_MN10300 80 +#define PORT_MN10300_CTS 81 + +#define PORT_SC26XX 82 + +/* SH-SCI */ +#define PORT_SCIFA 83 + +#define PORT_S3C6400 84 + +/* NWPSERIAL */ +#define PORT_NWPSERIAL 85 + +/* MAX3100 */ +#define PORT_MAX3100 86 + +/* Timberdale UART */ +#define PORT_TIMBUART 87 + +/* Qualcomm MSM SoCs */ +#define PORT_MSM 88 + +/* BCM63xx family SoCs */ +#define PORT_BCM63XX 89 + +/* Aeroflex Gaisler GRLIB APBUART */ +#define PORT_APBUART 90 + +/* Altera UARTs */ +#define PORT_ALTERA_JTAGUART 91 +#define PORT_ALTERA_UART 92 + +/* SH-SCI */ +#define PORT_SCIFB 93 + +/* MAX310X */ +#define PORT_MAX310X 94 + +/* High Speed UART for Medfield */ +#define PORT_MFD 95 + +/* TI OMAP-UART */ +#define PORT_OMAP 96 + +/* VIA VT8500 SoC */ +#define PORT_VT8500 97 + +/* Xilinx PSS UART */ +#define PORT_XUARTPS 98 + +/* Atheros AR933X SoC */ +#define PORT_AR933X 99 + +/* Energy Micro efm32 SoC */ +#define PORT_EFMUART 100 + + +#endif /* _UAPILINUX_SERIAL_CORE_H */ diff --git a/include/linux/serial_reg.h b/include/uapi/linux/serial_reg.h index 5ed325e88a8..5ed325e88a8 100644 --- a/include/linux/serial_reg.h +++ b/include/uapi/linux/serial_reg.h diff --git a/include/uapi/linux/serio.h b/include/uapi/linux/serio.h new file mode 100644 index 00000000000..9f53fa7fc13 --- /dev/null +++ b/include/uapi/linux/serio.h @@ -0,0 +1,80 @@ +/* + * Copyright (C) 1999-2002 Vojtech Pavlik +* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#ifndef _UAPI_SERIO_H +#define _UAPI_SERIO_H + + +#include <linux/ioctl.h> + +#define SPIOCSTYPE _IOW('q', 0x01, unsigned long) + + +/* + * bit masks for use in "interrupt" flags (3rd argument) + */ +#define SERIO_TIMEOUT 1 +#define SERIO_PARITY 2 +#define SERIO_FRAME 4 + +/* + * Serio types + */ +#define SERIO_XT 0x00 +#define SERIO_8042 0x01 +#define SERIO_RS232 0x02 +#define SERIO_HIL_MLC 0x03 +#define SERIO_PS_PSTHRU 0x05 +#define SERIO_8042_XL 0x06 + +/* + * Serio protocols + */ +#define SERIO_UNKNOWN 0x00 +#define SERIO_MSC 0x01 +#define SERIO_SUN 0x02 +#define SERIO_MS 0x03 +#define SERIO_MP 0x04 +#define SERIO_MZ 0x05 +#define SERIO_MZP 0x06 +#define SERIO_MZPP 0x07 +#define SERIO_VSXXXAA 0x08 +#define SERIO_SUNKBD 0x10 +#define SERIO_WARRIOR 0x18 +#define SERIO_SPACEORB 0x19 +#define SERIO_MAGELLAN 0x1a +#define SERIO_SPACEBALL 0x1b +#define SERIO_GUNZE 0x1c +#define SERIO_IFORCE 0x1d +#define SERIO_STINGER 0x1e +#define SERIO_NEWTON 0x1f +#define SERIO_STOWAWAY 0x20 +#define SERIO_H3600 0x21 +#define SERIO_PS2SER 0x22 +#define SERIO_TWIDKBD 0x23 +#define SERIO_TWIDJOY 0x24 +#define SERIO_HIL 0x25 +#define SERIO_SNES232 0x26 +#define SERIO_SEMTECH 0x27 +#define SERIO_LKKBD 0x28 +#define SERIO_ELO 0x29 +#define SERIO_MICROTOUCH 0x30 +#define SERIO_PENMOUNT 0x31 +#define SERIO_TOUCHRIGHT 0x32 +#define SERIO_TOUCHWIN 0x33 +#define SERIO_TAOSEVM 0x34 +#define SERIO_FUJITSU 0x35 +#define SERIO_ZHENHUA 0x36 +#define SERIO_INEXIO 0x37 +#define SERIO_TOUCHIT213 0x38 +#define SERIO_W8001 0x39 +#define SERIO_DYNAPRO 0x3a +#define SERIO_HAMPSHIRE 0x3b +#define SERIO_PS2MULT 0x3c +#define SERIO_TSC40 0x3d + +#endif /* _UAPI_SERIO_H */ diff --git a/include/uapi/linux/shm.h b/include/uapi/linux/shm.h new file mode 100644 index 00000000000..ec36fa1a83a --- /dev/null +++ b/include/uapi/linux/shm.h @@ -0,0 +1,79 @@ +#ifndef _UAPI_LINUX_SHM_H_ +#define _UAPI_LINUX_SHM_H_ + +#include <linux/ipc.h> +#include <linux/errno.h> +#ifndef __KERNEL__ +#include <unistd.h> +#endif + +/* + * SHMMAX, SHMMNI and SHMALL are upper limits are defaults which can + * be increased by sysctl + */ + +#define SHMMAX 0x2000000 /* max shared seg size (bytes) */ +#define SHMMIN 1 /* min shared seg size (bytes) */ +#define SHMMNI 4096 /* max num of segs system wide */ +#ifndef __KERNEL__ +#define SHMALL (SHMMAX/getpagesize()*(SHMMNI/16)) +#endif +#define SHMSEG SHMMNI /* max shared segs per process */ + + +/* Obsolete, used only for backwards compatibility and libc5 compiles */ +struct shmid_ds { + struct ipc_perm shm_perm; /* operation perms */ + int shm_segsz; /* size of segment (bytes) */ + __kernel_time_t shm_atime; /* last attach time */ + __kernel_time_t shm_dtime; /* last detach time */ + __kernel_time_t shm_ctime; /* last change time */ + __kernel_ipc_pid_t shm_cpid; /* pid of creator */ + __kernel_ipc_pid_t shm_lpid; /* pid of last operator */ + unsigned short shm_nattch; /* no. of current attaches */ + unsigned short shm_unused; /* compatibility */ + void *shm_unused2; /* ditto - used by DIPC */ + void *shm_unused3; /* unused */ +}; + +/* Include the definition of shmid64_ds and shminfo64 */ +#include <asm/shmbuf.h> + +/* permission flag for shmget */ +#define SHM_R 0400 /* or S_IRUGO from <linux/stat.h> */ +#define SHM_W 0200 /* or S_IWUGO from <linux/stat.h> */ + +/* mode for attach */ +#define SHM_RDONLY 010000 /* read-only access */ +#define SHM_RND 020000 /* round attach address to SHMLBA boundary */ +#define SHM_REMAP 040000 /* take-over region on attach */ +#define SHM_EXEC 0100000 /* execution access */ + +/* super user shmctl commands */ +#define SHM_LOCK 11 +#define SHM_UNLOCK 12 + +/* ipcs ctl commands */ +#define SHM_STAT 13 +#define SHM_INFO 14 + +/* Obsolete, used only for backwards compatibility */ +struct shminfo { + int shmmax; + int shmmin; + int shmmni; + int shmseg; + int shmall; +}; + +struct shm_info { + int used_ids; + unsigned long shm_tot; /* total allocated shm */ + unsigned long shm_rss; /* total resident shm */ + unsigned long shm_swp; /* total swapped shm */ + unsigned long swap_attempts; + unsigned long swap_successes; +}; + + +#endif /* _UAPI_LINUX_SHM_H_ */ diff --git a/include/uapi/linux/signal.h b/include/uapi/linux/signal.h new file mode 100644 index 00000000000..dff452ed6d0 --- /dev/null +++ b/include/uapi/linux/signal.h @@ -0,0 +1,8 @@ +#ifndef _UAPI_LINUX_SIGNAL_H +#define _UAPI_LINUX_SIGNAL_H + +#include <asm/signal.h> +#include <asm/siginfo.h> + + +#endif /* _UAPI_LINUX_SIGNAL_H */ diff --git a/include/uapi/linux/signalfd.h b/include/uapi/linux/signalfd.h new file mode 100644 index 00000000000..492c6def340 --- /dev/null +++ b/include/uapi/linux/signalfd.h @@ -0,0 +1,52 @@ +/* + * include/linux/signalfd.h + * + * Copyright (C) 2007 Davide Libenzi <davidel@xmailserver.org> + * + */ + +#ifndef _UAPI_LINUX_SIGNALFD_H +#define _UAPI_LINUX_SIGNALFD_H + +#include <linux/types.h> +/* For O_CLOEXEC and O_NONBLOCK */ +#include <linux/fcntl.h> + +/* Flags for signalfd4. */ +#define SFD_CLOEXEC O_CLOEXEC +#define SFD_NONBLOCK O_NONBLOCK + +struct signalfd_siginfo { + __u32 ssi_signo; + __s32 ssi_errno; + __s32 ssi_code; + __u32 ssi_pid; + __u32 ssi_uid; + __s32 ssi_fd; + __u32 ssi_tid; + __u32 ssi_band; + __u32 ssi_overrun; + __u32 ssi_trapno; + __s32 ssi_status; + __s32 ssi_int; + __u64 ssi_ptr; + __u64 ssi_utime; + __u64 ssi_stime; + __u64 ssi_addr; + __u16 ssi_addr_lsb; + + /* + * Pad strcture to 128 bytes. Remember to update the + * pad size when you add new members. We use a fixed + * size structure to avoid compatibility problems with + * future versions, and we leave extra space for additional + * members. We use fixed size members because this strcture + * comes out of a read(2) and we really don't want to have + * a compat on read(2). + */ + __u8 __pad[46]; +}; + + + +#endif /* _UAPI_LINUX_SIGNALFD_H */ diff --git a/include/linux/snmp.h b/include/uapi/linux/snmp.h index fdfba235f9f..fdfba235f9f 100644 --- a/include/linux/snmp.h +++ b/include/uapi/linux/snmp.h diff --git a/include/uapi/linux/sock_diag.h b/include/uapi/linux/sock_diag.h new file mode 100644 index 00000000000..b00e29efb16 --- /dev/null +++ b/include/uapi/linux/sock_diag.h @@ -0,0 +1,26 @@ +#ifndef _UAPI__SOCK_DIAG_H__ +#define _UAPI__SOCK_DIAG_H__ + +#include <linux/types.h> + +#define SOCK_DIAG_BY_FAMILY 20 + +struct sock_diag_req { + __u8 sdiag_family; + __u8 sdiag_protocol; +}; + +enum { + SK_MEMINFO_RMEM_ALLOC, + SK_MEMINFO_RCVBUF, + SK_MEMINFO_WMEM_ALLOC, + SK_MEMINFO_SNDBUF, + SK_MEMINFO_FWD_ALLOC, + SK_MEMINFO_WMEM_QUEUED, + SK_MEMINFO_OPTMEM, + SK_MEMINFO_BACKLOG, + + SK_MEMINFO_VARS, +}; + +#endif /* _UAPI__SOCK_DIAG_H__ */ diff --git a/include/uapi/linux/socket.h b/include/uapi/linux/socket.h new file mode 100644 index 00000000000..76ab0c68561 --- /dev/null +++ b/include/uapi/linux/socket.h @@ -0,0 +1,21 @@ +#ifndef _UAPI_LINUX_SOCKET_H +#define _UAPI_LINUX_SOCKET_H + +/* + * Desired design of maximum size and alignment (see RFC2553) + */ +#define _K_SS_MAXSIZE 128 /* Implementation specific max size */ +#define _K_SS_ALIGNSIZE (__alignof__ (struct sockaddr *)) + /* Implementation specific desired alignment */ + +typedef unsigned short __kernel_sa_family_t; + +struct __kernel_sockaddr_storage { + __kernel_sa_family_t ss_family; /* address family */ + /* Following field(s) are implementation specific */ + char __data[_K_SS_MAXSIZE - sizeof(unsigned short)]; + /* space to achieve desired size, */ + /* _SS_MAXSIZE value minus size of ss_family */ +} __attribute__ ((aligned(_K_SS_ALIGNSIZE))); /* force desired alignment */ + +#endif /* _UAPI_LINUX_SOCKET_H */ diff --git a/include/linux/sockios.h b/include/uapi/linux/sockios.h index 7997a506ad4..7997a506ad4 100644 --- a/include/linux/sockios.h +++ b/include/uapi/linux/sockios.h diff --git a/include/linux/som.h b/include/uapi/linux/som.h index 166594e4e7b..166594e4e7b 100644 --- a/include/linux/som.h +++ b/include/uapi/linux/som.h diff --git a/include/uapi/linux/sonet.h b/include/uapi/linux/sonet.h new file mode 100644 index 00000000000..cc54acee81b --- /dev/null +++ b/include/uapi/linux/sonet.h @@ -0,0 +1,60 @@ +/* sonet.h - SONET/SHD physical layer control */ + +/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */ + + +#ifndef _UAPILINUX_SONET_H +#define _UAPILINUX_SONET_H + +#define __SONET_ITEMS \ + __HANDLE_ITEM(section_bip); /* section parity errors (B1) */ \ + __HANDLE_ITEM(line_bip); /* line parity errors (B2) */ \ + __HANDLE_ITEM(path_bip); /* path parity errors (B3) */ \ + __HANDLE_ITEM(line_febe); /* line parity errors at remote */ \ + __HANDLE_ITEM(path_febe); /* path parity errors at remote */ \ + __HANDLE_ITEM(corr_hcs); /* correctable header errors */ \ + __HANDLE_ITEM(uncorr_hcs); /* uncorrectable header errors */ \ + __HANDLE_ITEM(tx_cells); /* cells sent */ \ + __HANDLE_ITEM(rx_cells); /* cells received */ + +struct sonet_stats { +#define __HANDLE_ITEM(i) int i + __SONET_ITEMS +#undef __HANDLE_ITEM +} __attribute__ ((packed)); + + +#define SONET_GETSTAT _IOR('a',ATMIOC_PHYTYP,struct sonet_stats) + /* get statistics */ +#define SONET_GETSTATZ _IOR('a',ATMIOC_PHYTYP+1,struct sonet_stats) + /* ... and zero counters */ +#define SONET_SETDIAG _IOWR('a',ATMIOC_PHYTYP+2,int) + /* set error insertion */ +#define SONET_CLRDIAG _IOWR('a',ATMIOC_PHYTYP+3,int) + /* clear error insertion */ +#define SONET_GETDIAG _IOR('a',ATMIOC_PHYTYP+4,int) + /* query error insertion */ +#define SONET_SETFRAMING _IOW('a',ATMIOC_PHYTYP+5,int) + /* set framing mode (SONET/SDH) */ +#define SONET_GETFRAMING _IOR('a',ATMIOC_PHYTYP+6,int) + /* get framing mode */ +#define SONET_GETFRSENSE _IOR('a',ATMIOC_PHYTYP+7, \ + unsigned char[SONET_FRSENSE_SIZE]) /* get framing sense information */ + +#define SONET_INS_SBIP 1 /* section BIP */ +#define SONET_INS_LBIP 2 /* line BIP */ +#define SONET_INS_PBIP 4 /* path BIP */ +#define SONET_INS_FRAME 8 /* out of frame */ +#define SONET_INS_LOS 16 /* set line to zero */ +#define SONET_INS_LAIS 32 /* line alarm indication signal */ +#define SONET_INS_PAIS 64 /* path alarm indication signal */ +#define SONET_INS_HCS 128 /* insert HCS error */ + +#define SONET_FRAME_SONET 0 /* SONET STS-3 framing */ +#define SONET_FRAME_SDH 1 /* SDH STM-1 framing */ + +#define SONET_FRSENSE_SIZE 6 /* C1[3],H1[3] (0xff for unknown) */ + + + +#endif /* _UAPILINUX_SONET_H */ diff --git a/include/uapi/linux/sonypi.h b/include/uapi/linux/sonypi.h new file mode 100644 index 00000000000..85078a28357 --- /dev/null +++ b/include/uapi/linux/sonypi.h @@ -0,0 +1,146 @@ +/* + * Sony Programmable I/O Control Device driver for VAIO + * + * Copyright (C) 2001-2005 Stelian Pop <stelian@popies.net> + * + * Copyright (C) 2005 Narayanan R S <nars@kadamba.org> + + * Copyright (C) 2001-2002 Alcôve <www.alcove.com> + * + * Copyright (C) 2001 Michael Ashley <m.ashley@unsw.edu.au> + * + * Copyright (C) 2001 Junichi Morita <jun1m@mars.dti.ne.jp> + * + * Copyright (C) 2000 Takaya Kinjo <t-kinjo@tc4.so-net.ne.jp> + * + * Copyright (C) 2000 Andrew Tridgell <tridge@valinux.com> + * + * Earlier work by Werner Almesberger, Paul `Rusty' Russell and Paul Mackerras. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifndef _UAPI_SONYPI_H_ +#define _UAPI_SONYPI_H_ + +#include <linux/types.h> + +/* events the user application reading /dev/sonypi can use */ + +#define SONYPI_EVENT_IGNORE 0 +#define SONYPI_EVENT_JOGDIAL_DOWN 1 +#define SONYPI_EVENT_JOGDIAL_UP 2 +#define SONYPI_EVENT_JOGDIAL_DOWN_PRESSED 3 +#define SONYPI_EVENT_JOGDIAL_UP_PRESSED 4 +#define SONYPI_EVENT_JOGDIAL_PRESSED 5 +#define SONYPI_EVENT_JOGDIAL_RELEASED 6 /* obsolete */ +#define SONYPI_EVENT_CAPTURE_PRESSED 7 +#define SONYPI_EVENT_CAPTURE_RELEASED 8 /* obsolete */ +#define SONYPI_EVENT_CAPTURE_PARTIALPRESSED 9 +#define SONYPI_EVENT_CAPTURE_PARTIALRELEASED 10 +#define SONYPI_EVENT_FNKEY_ESC 11 +#define SONYPI_EVENT_FNKEY_F1 12 +#define SONYPI_EVENT_FNKEY_F2 13 +#define SONYPI_EVENT_FNKEY_F3 14 +#define SONYPI_EVENT_FNKEY_F4 15 +#define SONYPI_EVENT_FNKEY_F5 16 +#define SONYPI_EVENT_FNKEY_F6 17 +#define SONYPI_EVENT_FNKEY_F7 18 +#define SONYPI_EVENT_FNKEY_F8 19 +#define SONYPI_EVENT_FNKEY_F9 20 +#define SONYPI_EVENT_FNKEY_F10 21 +#define SONYPI_EVENT_FNKEY_F11 22 +#define SONYPI_EVENT_FNKEY_F12 23 +#define SONYPI_EVENT_FNKEY_1 24 +#define SONYPI_EVENT_FNKEY_2 25 +#define SONYPI_EVENT_FNKEY_D 26 +#define SONYPI_EVENT_FNKEY_E 27 +#define SONYPI_EVENT_FNKEY_F 28 +#define SONYPI_EVENT_FNKEY_S 29 +#define SONYPI_EVENT_FNKEY_B 30 +#define SONYPI_EVENT_BLUETOOTH_PRESSED 31 +#define SONYPI_EVENT_PKEY_P1 32 +#define SONYPI_EVENT_PKEY_P2 33 +#define SONYPI_EVENT_PKEY_P3 34 +#define SONYPI_EVENT_BACK_PRESSED 35 +#define SONYPI_EVENT_LID_CLOSED 36 +#define SONYPI_EVENT_LID_OPENED 37 +#define SONYPI_EVENT_BLUETOOTH_ON 38 +#define SONYPI_EVENT_BLUETOOTH_OFF 39 +#define SONYPI_EVENT_HELP_PRESSED 40 +#define SONYPI_EVENT_FNKEY_ONLY 41 +#define SONYPI_EVENT_JOGDIAL_FAST_DOWN 42 +#define SONYPI_EVENT_JOGDIAL_FAST_UP 43 +#define SONYPI_EVENT_JOGDIAL_FAST_DOWN_PRESSED 44 +#define SONYPI_EVENT_JOGDIAL_FAST_UP_PRESSED 45 +#define SONYPI_EVENT_JOGDIAL_VFAST_DOWN 46 +#define SONYPI_EVENT_JOGDIAL_VFAST_UP 47 +#define SONYPI_EVENT_JOGDIAL_VFAST_DOWN_PRESSED 48 +#define SONYPI_EVENT_JOGDIAL_VFAST_UP_PRESSED 49 +#define SONYPI_EVENT_ZOOM_PRESSED 50 +#define SONYPI_EVENT_THUMBPHRASE_PRESSED 51 +#define SONYPI_EVENT_MEYE_FACE 52 +#define SONYPI_EVENT_MEYE_OPPOSITE 53 +#define SONYPI_EVENT_MEMORYSTICK_INSERT 54 +#define SONYPI_EVENT_MEMORYSTICK_EJECT 55 +#define SONYPI_EVENT_ANYBUTTON_RELEASED 56 +#define SONYPI_EVENT_BATTERY_INSERT 57 +#define SONYPI_EVENT_BATTERY_REMOVE 58 +#define SONYPI_EVENT_FNKEY_RELEASED 59 +#define SONYPI_EVENT_WIRELESS_ON 60 +#define SONYPI_EVENT_WIRELESS_OFF 61 +#define SONYPI_EVENT_ZOOM_IN_PRESSED 62 +#define SONYPI_EVENT_ZOOM_OUT_PRESSED 63 +#define SONYPI_EVENT_CD_EJECT_PRESSED 64 +#define SONYPI_EVENT_MODEKEY_PRESSED 65 +#define SONYPI_EVENT_PKEY_P4 66 +#define SONYPI_EVENT_PKEY_P5 67 +#define SONYPI_EVENT_SETTINGKEY_PRESSED 68 +#define SONYPI_EVENT_VOLUME_INC_PRESSED 69 +#define SONYPI_EVENT_VOLUME_DEC_PRESSED 70 +#define SONYPI_EVENT_BRIGHTNESS_PRESSED 71 +#define SONYPI_EVENT_MEDIA_PRESSED 72 +#define SONYPI_EVENT_VENDOR_PRESSED 73 + +/* get/set brightness */ +#define SONYPI_IOCGBRT _IOR('v', 0, __u8) +#define SONYPI_IOCSBRT _IOW('v', 0, __u8) + +/* get battery full capacity/remaining capacity */ +#define SONYPI_IOCGBAT1CAP _IOR('v', 2, __u16) +#define SONYPI_IOCGBAT1REM _IOR('v', 3, __u16) +#define SONYPI_IOCGBAT2CAP _IOR('v', 4, __u16) +#define SONYPI_IOCGBAT2REM _IOR('v', 5, __u16) + +/* get battery flags: battery1/battery2/ac adapter present */ +#define SONYPI_BFLAGS_B1 0x01 +#define SONYPI_BFLAGS_B2 0x02 +#define SONYPI_BFLAGS_AC 0x04 +#define SONYPI_IOCGBATFLAGS _IOR('v', 7, __u8) + +/* get/set bluetooth subsystem state on/off */ +#define SONYPI_IOCGBLUE _IOR('v', 8, __u8) +#define SONYPI_IOCSBLUE _IOW('v', 9, __u8) + +/* get/set fan state on/off */ +#define SONYPI_IOCGFAN _IOR('v', 10, __u8) +#define SONYPI_IOCSFAN _IOW('v', 11, __u8) + +/* get temperature (C) */ +#define SONYPI_IOCGTEMP _IOR('v', 12, __u8) + + +#endif /* _UAPI_SONYPI_H_ */ diff --git a/include/uapi/linux/sound.h b/include/uapi/linux/sound.h new file mode 100644 index 00000000000..014c9117c22 --- /dev/null +++ b/include/uapi/linux/sound.h @@ -0,0 +1,31 @@ +#ifndef _UAPI_LINUX_SOUND_H +#define _UAPI_LINUX_SOUND_H + +/* + * Minor numbers for the sound driver. + */ + +#include <linux/fs.h> + +#define SND_DEV_CTL 0 /* Control port /dev/mixer */ +#define SND_DEV_SEQ 1 /* Sequencer output /dev/sequencer (FM + synthesizer and MIDI output) */ +#define SND_DEV_MIDIN 2 /* Raw midi access */ +#define SND_DEV_DSP 3 /* Digitized voice /dev/dsp */ +#define SND_DEV_AUDIO 4 /* Sparc compatible /dev/audio */ +#define SND_DEV_DSP16 5 /* Like /dev/dsp but 16 bits/sample */ +/* #define SND_DEV_STATUS 6 */ /* /dev/sndstat (obsolete) */ +#define SND_DEV_UNUSED 6 +#define SND_DEV_AWFM 7 /* Reserved */ +#define SND_DEV_SEQ2 8 /* /dev/sequencer, level 2 interface */ +/* #define SND_DEV_SNDPROC 9 */ /* /dev/sndproc for programmable devices (not used) */ +/* #define SND_DEV_DMMIDI 9 */ +#define SND_DEV_SYNTH 9 /* Raw synth access /dev/synth (same as /dev/dmfm) */ +#define SND_DEV_DMFM 10 /* Raw synth access /dev/dmfm */ +#define SND_DEV_UNKNOWN11 11 +#define SND_DEV_ADSP 12 /* Like /dev/dsp (obsolete) */ +#define SND_DEV_AMIDI 13 /* Like /dev/midi (obsolete) */ +#define SND_DEV_ADMMIDI 14 /* Like /dev/dmmidi (onsolete) */ + + +#endif /* _UAPI_LINUX_SOUND_H */ diff --git a/include/uapi/linux/soundcard.h b/include/uapi/linux/soundcard.h new file mode 100644 index 00000000000..f3b21f98987 --- /dev/null +++ b/include/uapi/linux/soundcard.h @@ -0,0 +1,1282 @@ +/* + * Copyright by Hannu Savolainen 1993-1997 + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are + * met: 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. 2. + * Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ +#ifndef _UAPISOUNDCARD_H +#define _UAPISOUNDCARD_H + + +/* + * OSS interface version. With versions earlier than 3.6 this value is + * an integer with value less than 361. In versions 3.6 and later + * it's a six digit hexadecimal value. For example value + * of 0x030600 represents OSS version 3.6.0. + * Use ioctl(fd, OSS_GETVERSION, &int) to get the version number of + * the currently active driver. + */ +#define SOUND_VERSION 0x030802 +#define OPEN_SOUND_SYSTEM + +/* In Linux we need to be prepared for cross compiling */ +#include <linux/ioctl.h> + +/* Endian macros. */ +#ifndef __KERNEL__ +# include <endian.h> +#endif + +/* + * Supported card ID numbers (Should be somewhere else?) + */ + +#define SNDCARD_ADLIB 1 +#define SNDCARD_SB 2 +#define SNDCARD_PAS 3 +#define SNDCARD_GUS 4 +#define SNDCARD_MPU401 5 +#define SNDCARD_SB16 6 +#define SNDCARD_SB16MIDI 7 +#define SNDCARD_UART6850 8 +#define SNDCARD_GUS16 9 +#define SNDCARD_MSS 10 +#define SNDCARD_PSS 11 +#define SNDCARD_SSCAPE 12 +#define SNDCARD_PSS_MPU 13 +#define SNDCARD_PSS_MSS 14 +#define SNDCARD_SSCAPE_MSS 15 +#define SNDCARD_TRXPRO 16 +#define SNDCARD_TRXPRO_SB 17 +#define SNDCARD_TRXPRO_MPU 18 +#define SNDCARD_MAD16 19 +#define SNDCARD_MAD16_MPU 20 +#define SNDCARD_CS4232 21 +#define SNDCARD_CS4232_MPU 22 +#define SNDCARD_MAUI 23 +#define SNDCARD_PSEUDO_MSS 24 +#define SNDCARD_GUSPNP 25 +#define SNDCARD_UART401 26 +/* Sound card numbers 27 to N are reserved. Don't add more numbers here. */ + +/*********************************** + * IOCTL Commands for /dev/sequencer + */ + +#ifndef _SIOWR +#if defined(_IOWR) && (defined(_AIX) || (!defined(sun) && !defined(sparc) && !defined(__sparc__) && !defined(__INCioctlh) && !defined(__Lynx__))) +/* Use already defined ioctl defines if they exist (except with Sun or Sparc) */ +#define SIOCPARM_MASK IOCPARM_MASK +#define SIOC_VOID IOC_VOID +#define SIOC_OUT IOC_OUT +#define SIOC_IN IOC_IN +#define SIOC_INOUT IOC_INOUT +#define _SIOC_SIZE _IOC_SIZE +#define _SIOC_DIR _IOC_DIR +#define _SIOC_NONE _IOC_NONE +#define _SIOC_READ _IOC_READ +#define _SIOC_WRITE _IOC_WRITE +#define _SIO _IO +#define _SIOR _IOR +#define _SIOW _IOW +#define _SIOWR _IOWR +#else + +/* Ioctl's have the command encoded in the lower word, + * and the size of any in or out parameters in the upper + * word. The high 2 bits of the upper word are used + * to encode the in/out status of the parameter; for now + * we restrict parameters to at most 8191 bytes. + */ +/* #define SIOCTYPE (0xff<<8) */ +#define SIOCPARM_MASK 0x1fff /* parameters must be < 8192 bytes */ +#define SIOC_VOID 0x00000000 /* no parameters */ +#define SIOC_OUT 0x20000000 /* copy out parameters */ +#define SIOC_IN 0x40000000 /* copy in parameters */ +#define SIOC_INOUT (SIOC_IN|SIOC_OUT) +/* the 0x20000000 is so we can distinguish new ioctl's from old */ +#define _SIO(x,y) ((int)(SIOC_VOID|(x<<8)|y)) +#define _SIOR(x,y,t) ((int)(SIOC_OUT|((sizeof(t)&SIOCPARM_MASK)<<16)|(x<<8)|y)) +#define _SIOW(x,y,t) ((int)(SIOC_IN|((sizeof(t)&SIOCPARM_MASK)<<16)|(x<<8)|y)) +/* this should be _SIORW, but stdio got there first */ +#define _SIOWR(x,y,t) ((int)(SIOC_INOUT|((sizeof(t)&SIOCPARM_MASK)<<16)|(x<<8)|y)) +#define _SIOC_SIZE(x) ((x>>16)&SIOCPARM_MASK) +#define _SIOC_DIR(x) (x & 0xf0000000) +#define _SIOC_NONE SIOC_VOID +#define _SIOC_READ SIOC_OUT +#define _SIOC_WRITE SIOC_IN +# endif /* _IOWR */ +#endif /* !_SIOWR */ + +#define SNDCTL_SEQ_RESET _SIO ('Q', 0) +#define SNDCTL_SEQ_SYNC _SIO ('Q', 1) +#define SNDCTL_SYNTH_INFO _SIOWR('Q', 2, struct synth_info) +#define SNDCTL_SEQ_CTRLRATE _SIOWR('Q', 3, int) /* Set/get timer resolution (HZ) */ +#define SNDCTL_SEQ_GETOUTCOUNT _SIOR ('Q', 4, int) +#define SNDCTL_SEQ_GETINCOUNT _SIOR ('Q', 5, int) +#define SNDCTL_SEQ_PERCMODE _SIOW ('Q', 6, int) +#define SNDCTL_FM_LOAD_INSTR _SIOW ('Q', 7, struct sbi_instrument) /* Obsolete. Don't use!!!!!! */ +#define SNDCTL_SEQ_TESTMIDI _SIOW ('Q', 8, int) +#define SNDCTL_SEQ_RESETSAMPLES _SIOW ('Q', 9, int) +#define SNDCTL_SEQ_NRSYNTHS _SIOR ('Q',10, int) +#define SNDCTL_SEQ_NRMIDIS _SIOR ('Q',11, int) +#define SNDCTL_MIDI_INFO _SIOWR('Q',12, struct midi_info) +#define SNDCTL_SEQ_THRESHOLD _SIOW ('Q',13, int) +#define SNDCTL_SYNTH_MEMAVL _SIOWR('Q',14, int) /* in=dev#, out=memsize */ +#define SNDCTL_FM_4OP_ENABLE _SIOW ('Q',15, int) /* in=dev# */ +#define SNDCTL_SEQ_PANIC _SIO ('Q',17) +#define SNDCTL_SEQ_OUTOFBAND _SIOW ('Q',18, struct seq_event_rec) +#define SNDCTL_SEQ_GETTIME _SIOR ('Q',19, int) +#define SNDCTL_SYNTH_ID _SIOWR('Q',20, struct synth_info) +#define SNDCTL_SYNTH_CONTROL _SIOWR('Q',21, struct synth_control) +#define SNDCTL_SYNTH_REMOVESAMPLE _SIOWR('Q',22, struct remove_sample) + +typedef struct synth_control +{ + int devno; /* Synthesizer # */ + char data[4000]; /* Device spesific command/data record */ +}synth_control; + +typedef struct remove_sample +{ + int devno; /* Synthesizer # */ + int bankno; /* MIDI bank # (0=General MIDI) */ + int instrno; /* MIDI instrument number */ +} remove_sample; + +typedef struct seq_event_rec { + unsigned char arr[8]; +} seq_event_rec; + +#define SNDCTL_TMR_TIMEBASE _SIOWR('T', 1, int) +#define SNDCTL_TMR_START _SIO ('T', 2) +#define SNDCTL_TMR_STOP _SIO ('T', 3) +#define SNDCTL_TMR_CONTINUE _SIO ('T', 4) +#define SNDCTL_TMR_TEMPO _SIOWR('T', 5, int) +#define SNDCTL_TMR_SOURCE _SIOWR('T', 6, int) +# define TMR_INTERNAL 0x00000001 +# define TMR_EXTERNAL 0x00000002 +# define TMR_MODE_MIDI 0x00000010 +# define TMR_MODE_FSK 0x00000020 +# define TMR_MODE_CLS 0x00000040 +# define TMR_MODE_SMPTE 0x00000080 +#define SNDCTL_TMR_METRONOME _SIOW ('T', 7, int) +#define SNDCTL_TMR_SELECT _SIOW ('T', 8, int) + +/* + * Some big endian/little endian handling macros + */ + +#define _LINUX_PATCHKEY_H_INDIRECT +#include <linux/patchkey.h> +#undef _LINUX_PATCHKEY_H_INDIRECT + +#if !defined(__KERNEL__) +# if defined(__BYTE_ORDER) +# if __BYTE_ORDER == __BIG_ENDIAN +# define AFMT_S16_NE AFMT_S16_BE +# elif __BYTE_ORDER == __LITTLE_ENDIAN +# define AFMT_S16_NE AFMT_S16_LE +# else +# error "could not determine byte order" +# endif +# endif +#endif + +/* + * Sample loading mechanism for internal synthesizers (/dev/sequencer) + * The following patch_info structure has been designed to support + * Gravis UltraSound. It tries to be universal format for uploading + * sample based patches but is probably too limited. + * + * (PBD) As Hannu guessed, the GUS structure is too limited for + * the WaveFront, but this is the right place for a constant definition. + */ + +struct patch_info { + unsigned short key; /* Use WAVE_PATCH here */ +#define WAVE_PATCH _PATCHKEY(0x04) +#define GUS_PATCH WAVE_PATCH +#define WAVEFRONT_PATCH _PATCHKEY(0x06) + + short device_no; /* Synthesizer number */ + short instr_no; /* Midi pgm# */ + + unsigned int mode; +/* + * The least significant byte has the same format than the GUS .PAT + * files + */ +#define WAVE_16_BITS 0x01 /* bit 0 = 8 or 16 bit wave data. */ +#define WAVE_UNSIGNED 0x02 /* bit 1 = Signed - Unsigned data. */ +#define WAVE_LOOPING 0x04 /* bit 2 = looping enabled-1. */ +#define WAVE_BIDIR_LOOP 0x08 /* bit 3 = Set is bidirectional looping. */ +#define WAVE_LOOP_BACK 0x10 /* bit 4 = Set is looping backward. */ +#define WAVE_SUSTAIN_ON 0x20 /* bit 5 = Turn sustaining on. (Env. pts. 3)*/ +#define WAVE_ENVELOPES 0x40 /* bit 6 = Enable envelopes - 1 */ +#define WAVE_FAST_RELEASE 0x80 /* bit 7 = Shut off immediately after note off */ + /* (use the env_rate/env_offs fields). */ +/* Linux specific bits */ +#define WAVE_VIBRATO 0x00010000 /* The vibrato info is valid */ +#define WAVE_TREMOLO 0x00020000 /* The tremolo info is valid */ +#define WAVE_SCALE 0x00040000 /* The scaling info is valid */ +#define WAVE_FRACTIONS 0x00080000 /* Fraction information is valid */ +/* Reserved bits */ +#define WAVE_ROM 0x40000000 /* For future use */ +#define WAVE_MULAW 0x20000000 /* For future use */ +/* Other bits must be zeroed */ + + int len; /* Size of the wave data in bytes */ + int loop_start, loop_end; /* Byte offsets from the beginning */ + +/* + * The base_freq and base_note fields are used when computing the + * playback speed for a note. The base_note defines the tone frequency + * which is heard if the sample is played using the base_freq as the + * playback speed. + * + * The low_note and high_note fields define the minimum and maximum note + * frequencies for which this sample is valid. It is possible to define + * more than one samples for an instrument number at the same time. The + * low_note and high_note fields are used to select the most suitable one. + * + * The fields base_note, high_note and low_note should contain + * the note frequency multiplied by 1000. For example value for the + * middle A is 440*1000. + */ + + unsigned int base_freq; + unsigned int base_note; + unsigned int high_note; + unsigned int low_note; + int panning; /* -128=left, 127=right */ + int detuning; + +/* New fields introduced in version 1.99.5 */ + + /* Envelope. Enabled by mode bit WAVE_ENVELOPES */ + unsigned char env_rate[ 6 ]; /* GUS HW ramping rate */ + unsigned char env_offset[ 6 ]; /* 255 == 100% */ + + /* + * The tremolo, vibrato and scale info are not supported yet. + * Enable by setting the mode bits WAVE_TREMOLO, WAVE_VIBRATO or + * WAVE_SCALE + */ + + unsigned char tremolo_sweep; + unsigned char tremolo_rate; + unsigned char tremolo_depth; + + unsigned char vibrato_sweep; + unsigned char vibrato_rate; + unsigned char vibrato_depth; + + int scale_frequency; + unsigned int scale_factor; /* from 0 to 2048 or 0 to 2 */ + + int volume; + int fractions; + int reserved1; + int spare[2]; + char data[1]; /* The waveform data starts here */ + }; + +struct sysex_info { + short key; /* Use SYSEX_PATCH or MAUI_PATCH here */ +#define SYSEX_PATCH _PATCHKEY(0x05) +#define MAUI_PATCH _PATCHKEY(0x06) + short device_no; /* Synthesizer number */ + int len; /* Size of the sysex data in bytes */ + unsigned char data[1]; /* Sysex data starts here */ + }; + +/* + * /dev/sequencer input events. + * + * The data written to the /dev/sequencer is a stream of events. Events + * are records of 4 or 8 bytes. The first byte defines the size. + * Any number of events can be written with a write call. There + * is a set of macros for sending these events. Use these macros if you + * want to maximize portability of your program. + * + * Events SEQ_WAIT, SEQ_MIDIPUTC and SEQ_ECHO. Are also input events. + * (All input events are currently 4 bytes long. Be prepared to support + * 8 byte events also. If you receive any event having first byte >= 128, + * it's a 8 byte event. + * + * The events are documented at the end of this file. + * + * Normal events (4 bytes) + * There is also a 8 byte version of most of the 4 byte events. The + * 8 byte one is recommended. + */ +#define SEQ_NOTEOFF 0 +#define SEQ_FMNOTEOFF SEQ_NOTEOFF /* Just old name */ +#define SEQ_NOTEON 1 +#define SEQ_FMNOTEON SEQ_NOTEON +#define SEQ_WAIT TMR_WAIT_ABS +#define SEQ_PGMCHANGE 3 +#define SEQ_FMPGMCHANGE SEQ_PGMCHANGE +#define SEQ_SYNCTIMER TMR_START +#define SEQ_MIDIPUTC 5 +#define SEQ_DRUMON 6 /*** OBSOLETE ***/ +#define SEQ_DRUMOFF 7 /*** OBSOLETE ***/ +#define SEQ_ECHO TMR_ECHO /* For synching programs with output */ +#define SEQ_AFTERTOUCH 9 +#define SEQ_CONTROLLER 10 + +/******************************************* + * Midi controller numbers + ******************************************* + * Controllers 0 to 31 (0x00 to 0x1f) and + * 32 to 63 (0x20 to 0x3f) are continuous + * controllers. + * In the MIDI 1.0 these controllers are sent using + * two messages. Controller numbers 0 to 31 are used + * to send the MSB and the controller numbers 32 to 63 + * are for the LSB. Note that just 7 bits are used in MIDI bytes. + */ + +#define CTL_BANK_SELECT 0x00 +#define CTL_MODWHEEL 0x01 +#define CTL_BREATH 0x02 +/* undefined 0x03 */ +#define CTL_FOOT 0x04 +#define CTL_PORTAMENTO_TIME 0x05 +#define CTL_DATA_ENTRY 0x06 +#define CTL_MAIN_VOLUME 0x07 +#define CTL_BALANCE 0x08 +/* undefined 0x09 */ +#define CTL_PAN 0x0a +#define CTL_EXPRESSION 0x0b +/* undefined 0x0c */ +/* undefined 0x0d */ +/* undefined 0x0e */ +/* undefined 0x0f */ +#define CTL_GENERAL_PURPOSE1 0x10 +#define CTL_GENERAL_PURPOSE2 0x11 +#define CTL_GENERAL_PURPOSE3 0x12 +#define CTL_GENERAL_PURPOSE4 0x13 +/* undefined 0x14 - 0x1f */ + +/* undefined 0x20 */ +/* The controller numbers 0x21 to 0x3f are reserved for the */ +/* least significant bytes of the controllers 0x00 to 0x1f. */ +/* These controllers are not recognised by the driver. */ + +/* Controllers 64 to 69 (0x40 to 0x45) are on/off switches. */ +/* 0=OFF and 127=ON (intermediate values are possible) */ +#define CTL_DAMPER_PEDAL 0x40 +#define CTL_SUSTAIN 0x40 /* Alias */ +#define CTL_HOLD 0x40 /* Alias */ +#define CTL_PORTAMENTO 0x41 +#define CTL_SOSTENUTO 0x42 +#define CTL_SOFT_PEDAL 0x43 +/* undefined 0x44 */ +#define CTL_HOLD2 0x45 +/* undefined 0x46 - 0x4f */ + +#define CTL_GENERAL_PURPOSE5 0x50 +#define CTL_GENERAL_PURPOSE6 0x51 +#define CTL_GENERAL_PURPOSE7 0x52 +#define CTL_GENERAL_PURPOSE8 0x53 +/* undefined 0x54 - 0x5a */ +#define CTL_EXT_EFF_DEPTH 0x5b +#define CTL_TREMOLO_DEPTH 0x5c +#define CTL_CHORUS_DEPTH 0x5d +#define CTL_DETUNE_DEPTH 0x5e +#define CTL_CELESTE_DEPTH 0x5e /* Alias for the above one */ +#define CTL_PHASER_DEPTH 0x5f +#define CTL_DATA_INCREMENT 0x60 +#define CTL_DATA_DECREMENT 0x61 +#define CTL_NONREG_PARM_NUM_LSB 0x62 +#define CTL_NONREG_PARM_NUM_MSB 0x63 +#define CTL_REGIST_PARM_NUM_LSB 0x64 +#define CTL_REGIST_PARM_NUM_MSB 0x65 +/* undefined 0x66 - 0x78 */ +/* reserved 0x79 - 0x7f */ + +/* Pseudo controllers (not midi compatible) */ +#define CTRL_PITCH_BENDER 255 +#define CTRL_PITCH_BENDER_RANGE 254 +#define CTRL_EXPRESSION 253 /* Obsolete */ +#define CTRL_MAIN_VOLUME 252 /* Obsolete */ +#define SEQ_BALANCE 11 +#define SEQ_VOLMODE 12 + +/* + * Volume mode decides how volumes are used + */ + +#define VOL_METHOD_ADAGIO 1 +#define VOL_METHOD_LINEAR 2 + +/* + * Note! SEQ_WAIT, SEQ_MIDIPUTC and SEQ_ECHO are used also as + * input events. + */ + +/* + * Event codes 0xf0 to 0xfc are reserved for future extensions. + */ + +#define SEQ_FULLSIZE 0xfd /* Long events */ +/* + * SEQ_FULLSIZE events are used for loading patches/samples to the + * synthesizer devices. These events are passed directly to the driver + * of the associated synthesizer device. There is no limit to the size + * of the extended events. These events are not queued but executed + * immediately when the write() is called (execution can take several + * seconds of time). + * + * When a SEQ_FULLSIZE message is written to the device, it must + * be written using exactly one write() call. Other events cannot + * be mixed to the same write. + * + * For FM synths (YM3812/OPL3) use struct sbi_instrument and write it to the + * /dev/sequencer. Don't write other data together with the instrument structure + * Set the key field of the structure to FM_PATCH. The device field is used to + * route the patch to the corresponding device. + * + * For wave table use struct patch_info. Initialize the key field + * to WAVE_PATCH. + */ +#define SEQ_PRIVATE 0xfe /* Low level HW dependent events (8 bytes) */ +#define SEQ_EXTENDED 0xff /* Extended events (8 bytes) OBSOLETE */ + +/* + * Record for FM patches + */ + +typedef unsigned char sbi_instr_data[32]; + +struct sbi_instrument { + unsigned short key; /* FM_PATCH or OPL3_PATCH */ +#define FM_PATCH _PATCHKEY(0x01) +#define OPL3_PATCH _PATCHKEY(0x03) + short device; /* Synth# (0-4) */ + int channel; /* Program# to be initialized */ + sbi_instr_data operators; /* Register settings for operator cells (.SBI format) */ + }; + +struct synth_info { /* Read only */ + char name[30]; + int device; /* 0-N. INITIALIZE BEFORE CALLING */ + int synth_type; +#define SYNTH_TYPE_FM 0 +#define SYNTH_TYPE_SAMPLE 1 +#define SYNTH_TYPE_MIDI 2 /* Midi interface */ + + int synth_subtype; +#define FM_TYPE_ADLIB 0x00 +#define FM_TYPE_OPL3 0x01 +#define MIDI_TYPE_MPU401 0x401 + +#define SAMPLE_TYPE_BASIC 0x10 +#define SAMPLE_TYPE_GUS SAMPLE_TYPE_BASIC +#define SAMPLE_TYPE_WAVEFRONT 0x11 + + int perc_mode; /* No longer supported */ + int nr_voices; + int nr_drums; /* Obsolete field */ + int instr_bank_size; + unsigned int capabilities; +#define SYNTH_CAP_PERCMODE 0x00000001 /* No longer used */ +#define SYNTH_CAP_OPL3 0x00000002 /* Set if OPL3 supported */ +#define SYNTH_CAP_INPUT 0x00000004 /* Input (MIDI) device */ + int dummies[19]; /* Reserve space */ + }; + +struct sound_timer_info { + char name[32]; + int caps; + }; + +#define MIDI_CAP_MPU401 1 /* MPU-401 intelligent mode */ + +struct midi_info { + char name[30]; + int device; /* 0-N. INITIALIZE BEFORE CALLING */ + unsigned int capabilities; /* To be defined later */ + int dev_type; + int dummies[18]; /* Reserve space */ + }; + +/******************************************** + * ioctl commands for the /dev/midi## + */ +typedef struct { + unsigned char cmd; + char nr_args, nr_returns; + unsigned char data[30]; + } mpu_command_rec; + +#define SNDCTL_MIDI_PRETIME _SIOWR('m', 0, int) +#define SNDCTL_MIDI_MPUMODE _SIOWR('m', 1, int) +#define SNDCTL_MIDI_MPUCMD _SIOWR('m', 2, mpu_command_rec) + +/******************************************** + * IOCTL commands for /dev/dsp and /dev/audio + */ + +#define SNDCTL_DSP_RESET _SIO ('P', 0) +#define SNDCTL_DSP_SYNC _SIO ('P', 1) +#define SNDCTL_DSP_SPEED _SIOWR('P', 2, int) +#define SNDCTL_DSP_STEREO _SIOWR('P', 3, int) +#define SNDCTL_DSP_GETBLKSIZE _SIOWR('P', 4, int) +#define SNDCTL_DSP_SAMPLESIZE SNDCTL_DSP_SETFMT +#define SNDCTL_DSP_CHANNELS _SIOWR('P', 6, int) +#define SOUND_PCM_WRITE_CHANNELS SNDCTL_DSP_CHANNELS +#define SOUND_PCM_WRITE_FILTER _SIOWR('P', 7, int) +#define SNDCTL_DSP_POST _SIO ('P', 8) +#define SNDCTL_DSP_SUBDIVIDE _SIOWR('P', 9, int) +#define SNDCTL_DSP_SETFRAGMENT _SIOWR('P',10, int) + +/* Audio data formats (Note! U8=8 and S16_LE=16 for compatibility) */ +#define SNDCTL_DSP_GETFMTS _SIOR ('P',11, int) /* Returns a mask */ +#define SNDCTL_DSP_SETFMT _SIOWR('P',5, int) /* Selects ONE fmt*/ +# define AFMT_QUERY 0x00000000 /* Return current fmt */ +# define AFMT_MU_LAW 0x00000001 +# define AFMT_A_LAW 0x00000002 +# define AFMT_IMA_ADPCM 0x00000004 +# define AFMT_U8 0x00000008 +# define AFMT_S16_LE 0x00000010 /* Little endian signed 16*/ +# define AFMT_S16_BE 0x00000020 /* Big endian signed 16 */ +# define AFMT_S8 0x00000040 +# define AFMT_U16_LE 0x00000080 /* Little endian U16 */ +# define AFMT_U16_BE 0x00000100 /* Big endian U16 */ +# define AFMT_MPEG 0x00000200 /* MPEG (2) audio */ +# define AFMT_AC3 0x00000400 /* Dolby Digital AC3 */ + +/* + * Buffer status queries. + */ +typedef struct audio_buf_info { + int fragments; /* # of available fragments (partially usend ones not counted) */ + int fragstotal; /* Total # of fragments allocated */ + int fragsize; /* Size of a fragment in bytes */ + + int bytes; /* Available space in bytes (includes partially used fragments) */ + /* Note! 'bytes' could be more than fragments*fragsize */ + } audio_buf_info; + +#define SNDCTL_DSP_GETOSPACE _SIOR ('P',12, audio_buf_info) +#define SNDCTL_DSP_GETISPACE _SIOR ('P',13, audio_buf_info) +#define SNDCTL_DSP_NONBLOCK _SIO ('P',14) +#define SNDCTL_DSP_GETCAPS _SIOR ('P',15, int) +# define DSP_CAP_REVISION 0x000000ff /* Bits for revision level (0 to 255) */ +# define DSP_CAP_DUPLEX 0x00000100 /* Full duplex record/playback */ +# define DSP_CAP_REALTIME 0x00000200 /* Real time capability */ +# define DSP_CAP_BATCH 0x00000400 /* Device has some kind of */ + /* internal buffers which may */ + /* cause some delays and */ + /* decrease precision of timing */ +# define DSP_CAP_COPROC 0x00000800 /* Has a coprocessor */ + /* Sometimes it's a DSP */ + /* but usually not */ +# define DSP_CAP_TRIGGER 0x00001000 /* Supports SETTRIGGER */ +# define DSP_CAP_MMAP 0x00002000 /* Supports mmap() */ +# define DSP_CAP_MULTI 0x00004000 /* support multiple open */ +# define DSP_CAP_BIND 0x00008000 /* channel binding to front/rear/cneter/lfe */ + + +#define SNDCTL_DSP_GETTRIGGER _SIOR ('P',16, int) +#define SNDCTL_DSP_SETTRIGGER _SIOW ('P',16, int) +# define PCM_ENABLE_INPUT 0x00000001 +# define PCM_ENABLE_OUTPUT 0x00000002 + +typedef struct count_info { + int bytes; /* Total # of bytes processed */ + int blocks; /* # of fragment transitions since last time */ + int ptr; /* Current DMA pointer value */ + } count_info; + +#define SNDCTL_DSP_GETIPTR _SIOR ('P',17, count_info) +#define SNDCTL_DSP_GETOPTR _SIOR ('P',18, count_info) + +typedef struct buffmem_desc { + unsigned *buffer; + int size; + } buffmem_desc; +#define SNDCTL_DSP_MAPINBUF _SIOR ('P', 19, buffmem_desc) +#define SNDCTL_DSP_MAPOUTBUF _SIOR ('P', 20, buffmem_desc) +#define SNDCTL_DSP_SETSYNCRO _SIO ('P', 21) +#define SNDCTL_DSP_SETDUPLEX _SIO ('P', 22) +#define SNDCTL_DSP_GETODELAY _SIOR ('P', 23, int) + +#define SNDCTL_DSP_GETCHANNELMASK _SIOWR('P', 64, int) +#define SNDCTL_DSP_BIND_CHANNEL _SIOWR('P', 65, int) +# define DSP_BIND_QUERY 0x00000000 +# define DSP_BIND_FRONT 0x00000001 +# define DSP_BIND_SURR 0x00000002 +# define DSP_BIND_CENTER_LFE 0x00000004 +# define DSP_BIND_HANDSET 0x00000008 +# define DSP_BIND_MIC 0x00000010 +# define DSP_BIND_MODEM1 0x00000020 +# define DSP_BIND_MODEM2 0x00000040 +# define DSP_BIND_I2S 0x00000080 +# define DSP_BIND_SPDIF 0x00000100 + +#define SNDCTL_DSP_SETSPDIF _SIOW ('P', 66, int) +#define SNDCTL_DSP_GETSPDIF _SIOR ('P', 67, int) +# define SPDIF_PRO 0x0001 +# define SPDIF_N_AUD 0x0002 +# define SPDIF_COPY 0x0004 +# define SPDIF_PRE 0x0008 +# define SPDIF_CC 0x07f0 +# define SPDIF_L 0x0800 +# define SPDIF_DRS 0x4000 +# define SPDIF_V 0x8000 + +/* + * Application's profile defines the way how playback underrun situations should be handled. + * + * APF_NORMAL (the default) and APF_NETWORK make the driver to cleanup the + * playback buffer whenever an underrun occurs. This consumes some time + * prevents looping the existing buffer. + * APF_CPUINTENS is intended to be set by CPU intensive applications which + * are likely to run out of time occasionally. In this mode the buffer cleanup is + * disabled which saves CPU time but also let's the previous buffer content to + * be played during the "pause" after the underrun. + */ +#define SNDCTL_DSP_PROFILE _SIOW ('P', 23, int) +#define APF_NORMAL 0 /* Normal applications */ +#define APF_NETWORK 1 /* Underruns probably caused by an "external" delay */ +#define APF_CPUINTENS 2 /* Underruns probably caused by "overheating" the CPU */ + +#define SOUND_PCM_READ_RATE _SIOR ('P', 2, int) +#define SOUND_PCM_READ_CHANNELS _SIOR ('P', 6, int) +#define SOUND_PCM_READ_BITS _SIOR ('P', 5, int) +#define SOUND_PCM_READ_FILTER _SIOR ('P', 7, int) + +/* Some alias names */ +#define SOUND_PCM_WRITE_BITS SNDCTL_DSP_SETFMT +#define SOUND_PCM_WRITE_RATE SNDCTL_DSP_SPEED +#define SOUND_PCM_POST SNDCTL_DSP_POST +#define SOUND_PCM_RESET SNDCTL_DSP_RESET +#define SOUND_PCM_SYNC SNDCTL_DSP_SYNC +#define SOUND_PCM_SUBDIVIDE SNDCTL_DSP_SUBDIVIDE +#define SOUND_PCM_SETFRAGMENT SNDCTL_DSP_SETFRAGMENT +#define SOUND_PCM_GETFMTS SNDCTL_DSP_GETFMTS +#define SOUND_PCM_SETFMT SNDCTL_DSP_SETFMT +#define SOUND_PCM_GETOSPACE SNDCTL_DSP_GETOSPACE +#define SOUND_PCM_GETISPACE SNDCTL_DSP_GETISPACE +#define SOUND_PCM_NONBLOCK SNDCTL_DSP_NONBLOCK +#define SOUND_PCM_GETCAPS SNDCTL_DSP_GETCAPS +#define SOUND_PCM_GETTRIGGER SNDCTL_DSP_GETTRIGGER +#define SOUND_PCM_SETTRIGGER SNDCTL_DSP_SETTRIGGER +#define SOUND_PCM_SETSYNCRO SNDCTL_DSP_SETSYNCRO +#define SOUND_PCM_GETIPTR SNDCTL_DSP_GETIPTR +#define SOUND_PCM_GETOPTR SNDCTL_DSP_GETOPTR +#define SOUND_PCM_MAPINBUF SNDCTL_DSP_MAPINBUF +#define SOUND_PCM_MAPOUTBUF SNDCTL_DSP_MAPOUTBUF + +/* + * ioctl calls to be used in communication with coprocessors and + * DSP chips. + */ + +typedef struct copr_buffer { + int command; /* Set to 0 if not used */ + int flags; +#define CPF_NONE 0x0000 +#define CPF_FIRST 0x0001 /* First block */ +#define CPF_LAST 0x0002 /* Last block */ + int len; + int offs; /* If required by the device (0 if not used) */ + + unsigned char data[4000]; /* NOTE! 4000 is not 4k */ + } copr_buffer; + +typedef struct copr_debug_buf { + int command; /* Used internally. Set to 0 */ + int parm1; + int parm2; + int flags; + int len; /* Length of data in bytes */ + } copr_debug_buf; + +typedef struct copr_msg { + int len; + unsigned char data[4000]; + } copr_msg; + +#define SNDCTL_COPR_RESET _SIO ('C', 0) +#define SNDCTL_COPR_LOAD _SIOWR('C', 1, copr_buffer) +#define SNDCTL_COPR_RDATA _SIOWR('C', 2, copr_debug_buf) +#define SNDCTL_COPR_RCODE _SIOWR('C', 3, copr_debug_buf) +#define SNDCTL_COPR_WDATA _SIOW ('C', 4, copr_debug_buf) +#define SNDCTL_COPR_WCODE _SIOW ('C', 5, copr_debug_buf) +#define SNDCTL_COPR_RUN _SIOWR('C', 6, copr_debug_buf) +#define SNDCTL_COPR_HALT _SIOWR('C', 7, copr_debug_buf) +#define SNDCTL_COPR_SENDMSG _SIOWR('C', 8, copr_msg) +#define SNDCTL_COPR_RCVMSG _SIOR ('C', 9, copr_msg) + +/********************************************* + * IOCTL commands for /dev/mixer + */ + +/* + * Mixer devices + * + * There can be up to 20 different analog mixer channels. The + * SOUND_MIXER_NRDEVICES gives the currently supported maximum. + * The SOUND_MIXER_READ_DEVMASK returns a bitmask which tells + * the devices supported by the particular mixer. + */ + +#define SOUND_MIXER_NRDEVICES 25 +#define SOUND_MIXER_VOLUME 0 +#define SOUND_MIXER_BASS 1 +#define SOUND_MIXER_TREBLE 2 +#define SOUND_MIXER_SYNTH 3 +#define SOUND_MIXER_PCM 4 +#define SOUND_MIXER_SPEAKER 5 +#define SOUND_MIXER_LINE 6 +#define SOUND_MIXER_MIC 7 +#define SOUND_MIXER_CD 8 +#define SOUND_MIXER_IMIX 9 /* Recording monitor */ +#define SOUND_MIXER_ALTPCM 10 +#define SOUND_MIXER_RECLEV 11 /* Recording level */ +#define SOUND_MIXER_IGAIN 12 /* Input gain */ +#define SOUND_MIXER_OGAIN 13 /* Output gain */ +/* + * The AD1848 codec and compatibles have three line level inputs + * (line, aux1 and aux2). Since each card manufacturer have assigned + * different meanings to these inputs, it's inpractical to assign + * specific meanings (line, cd, synth etc.) to them. + */ +#define SOUND_MIXER_LINE1 14 /* Input source 1 (aux1) */ +#define SOUND_MIXER_LINE2 15 /* Input source 2 (aux2) */ +#define SOUND_MIXER_LINE3 16 /* Input source 3 (line) */ +#define SOUND_MIXER_DIGITAL1 17 /* Digital (input) 1 */ +#define SOUND_MIXER_DIGITAL2 18 /* Digital (input) 2 */ +#define SOUND_MIXER_DIGITAL3 19 /* Digital (input) 3 */ +#define SOUND_MIXER_PHONEIN 20 /* Phone input */ +#define SOUND_MIXER_PHONEOUT 21 /* Phone output */ +#define SOUND_MIXER_VIDEO 22 /* Video/TV (audio) in */ +#define SOUND_MIXER_RADIO 23 /* Radio in */ +#define SOUND_MIXER_MONITOR 24 /* Monitor (usually mic) volume */ + +/* Some on/off settings (SOUND_SPECIAL_MIN - SOUND_SPECIAL_MAX) */ +/* Not counted to SOUND_MIXER_NRDEVICES, but use the same number space */ +#define SOUND_ONOFF_MIN 28 +#define SOUND_ONOFF_MAX 30 + +/* Note! Number 31 cannot be used since the sign bit is reserved */ +#define SOUND_MIXER_NONE 31 + +/* + * The following unsupported macros are no longer functional. + * Use SOUND_MIXER_PRIVATE# macros in future. + */ +#define SOUND_MIXER_ENHANCE SOUND_MIXER_NONE +#define SOUND_MIXER_MUTE SOUND_MIXER_NONE +#define SOUND_MIXER_LOUD SOUND_MIXER_NONE + + +#define SOUND_DEVICE_LABELS {"Vol ", "Bass ", "Trebl", "Synth", "Pcm ", "Spkr ", "Line ", \ + "Mic ", "CD ", "Mix ", "Pcm2 ", "Rec ", "IGain", "OGain", \ + "Line1", "Line2", "Line3", "Digital1", "Digital2", "Digital3", \ + "PhoneIn", "PhoneOut", "Video", "Radio", "Monitor"} + +#define SOUND_DEVICE_NAMES {"vol", "bass", "treble", "synth", "pcm", "speaker", "line", \ + "mic", "cd", "mix", "pcm2", "rec", "igain", "ogain", \ + "line1", "line2", "line3", "dig1", "dig2", "dig3", \ + "phin", "phout", "video", "radio", "monitor"} + +/* Device bitmask identifiers */ + +#define SOUND_MIXER_RECSRC 0xff /* Arg contains a bit for each recording source */ +#define SOUND_MIXER_DEVMASK 0xfe /* Arg contains a bit for each supported device */ +#define SOUND_MIXER_RECMASK 0xfd /* Arg contains a bit for each supported recording source */ +#define SOUND_MIXER_CAPS 0xfc +# define SOUND_CAP_EXCL_INPUT 0x00000001 /* Only one recording source at a time */ +#define SOUND_MIXER_STEREODEVS 0xfb /* Mixer channels supporting stereo */ +#define SOUND_MIXER_OUTSRC 0xfa /* Arg contains a bit for each input source to output */ +#define SOUND_MIXER_OUTMASK 0xf9 /* Arg contains a bit for each supported input source to output */ + +/* Device mask bits */ + +#define SOUND_MASK_VOLUME (1 << SOUND_MIXER_VOLUME) +#define SOUND_MASK_BASS (1 << SOUND_MIXER_BASS) +#define SOUND_MASK_TREBLE (1 << SOUND_MIXER_TREBLE) +#define SOUND_MASK_SYNTH (1 << SOUND_MIXER_SYNTH) +#define SOUND_MASK_PCM (1 << SOUND_MIXER_PCM) +#define SOUND_MASK_SPEAKER (1 << SOUND_MIXER_SPEAKER) +#define SOUND_MASK_LINE (1 << SOUND_MIXER_LINE) +#define SOUND_MASK_MIC (1 << SOUND_MIXER_MIC) +#define SOUND_MASK_CD (1 << SOUND_MIXER_CD) +#define SOUND_MASK_IMIX (1 << SOUND_MIXER_IMIX) +#define SOUND_MASK_ALTPCM (1 << SOUND_MIXER_ALTPCM) +#define SOUND_MASK_RECLEV (1 << SOUND_MIXER_RECLEV) +#define SOUND_MASK_IGAIN (1 << SOUND_MIXER_IGAIN) +#define SOUND_MASK_OGAIN (1 << SOUND_MIXER_OGAIN) +#define SOUND_MASK_LINE1 (1 << SOUND_MIXER_LINE1) +#define SOUND_MASK_LINE2 (1 << SOUND_MIXER_LINE2) +#define SOUND_MASK_LINE3 (1 << SOUND_MIXER_LINE3) +#define SOUND_MASK_DIGITAL1 (1 << SOUND_MIXER_DIGITAL1) +#define SOUND_MASK_DIGITAL2 (1 << SOUND_MIXER_DIGITAL2) +#define SOUND_MASK_DIGITAL3 (1 << SOUND_MIXER_DIGITAL3) +#define SOUND_MASK_PHONEIN (1 << SOUND_MIXER_PHONEIN) +#define SOUND_MASK_PHONEOUT (1 << SOUND_MIXER_PHONEOUT) +#define SOUND_MASK_RADIO (1 << SOUND_MIXER_RADIO) +#define SOUND_MASK_VIDEO (1 << SOUND_MIXER_VIDEO) +#define SOUND_MASK_MONITOR (1 << SOUND_MIXER_MONITOR) + +/* Obsolete macros */ +#define SOUND_MASK_MUTE (1 << SOUND_MIXER_MUTE) +#define SOUND_MASK_ENHANCE (1 << SOUND_MIXER_ENHANCE) +#define SOUND_MASK_LOUD (1 << SOUND_MIXER_LOUD) + +#define MIXER_READ(dev) _SIOR('M', dev, int) +#define SOUND_MIXER_READ_VOLUME MIXER_READ(SOUND_MIXER_VOLUME) +#define SOUND_MIXER_READ_BASS MIXER_READ(SOUND_MIXER_BASS) +#define SOUND_MIXER_READ_TREBLE MIXER_READ(SOUND_MIXER_TREBLE) +#define SOUND_MIXER_READ_SYNTH MIXER_READ(SOUND_MIXER_SYNTH) +#define SOUND_MIXER_READ_PCM MIXER_READ(SOUND_MIXER_PCM) +#define SOUND_MIXER_READ_SPEAKER MIXER_READ(SOUND_MIXER_SPEAKER) +#define SOUND_MIXER_READ_LINE MIXER_READ(SOUND_MIXER_LINE) +#define SOUND_MIXER_READ_MIC MIXER_READ(SOUND_MIXER_MIC) +#define SOUND_MIXER_READ_CD MIXER_READ(SOUND_MIXER_CD) +#define SOUND_MIXER_READ_IMIX MIXER_READ(SOUND_MIXER_IMIX) +#define SOUND_MIXER_READ_ALTPCM MIXER_READ(SOUND_MIXER_ALTPCM) +#define SOUND_MIXER_READ_RECLEV MIXER_READ(SOUND_MIXER_RECLEV) +#define SOUND_MIXER_READ_IGAIN MIXER_READ(SOUND_MIXER_IGAIN) +#define SOUND_MIXER_READ_OGAIN MIXER_READ(SOUND_MIXER_OGAIN) +#define SOUND_MIXER_READ_LINE1 MIXER_READ(SOUND_MIXER_LINE1) +#define SOUND_MIXER_READ_LINE2 MIXER_READ(SOUND_MIXER_LINE2) +#define SOUND_MIXER_READ_LINE3 MIXER_READ(SOUND_MIXER_LINE3) + +/* Obsolete macros */ +#define SOUND_MIXER_READ_MUTE MIXER_READ(SOUND_MIXER_MUTE) +#define SOUND_MIXER_READ_ENHANCE MIXER_READ(SOUND_MIXER_ENHANCE) +#define SOUND_MIXER_READ_LOUD MIXER_READ(SOUND_MIXER_LOUD) + +#define SOUND_MIXER_READ_RECSRC MIXER_READ(SOUND_MIXER_RECSRC) +#define SOUND_MIXER_READ_DEVMASK MIXER_READ(SOUND_MIXER_DEVMASK) +#define SOUND_MIXER_READ_RECMASK MIXER_READ(SOUND_MIXER_RECMASK) +#define SOUND_MIXER_READ_STEREODEVS MIXER_READ(SOUND_MIXER_STEREODEVS) +#define SOUND_MIXER_READ_CAPS MIXER_READ(SOUND_MIXER_CAPS) + +#define MIXER_WRITE(dev) _SIOWR('M', dev, int) +#define SOUND_MIXER_WRITE_VOLUME MIXER_WRITE(SOUND_MIXER_VOLUME) +#define SOUND_MIXER_WRITE_BASS MIXER_WRITE(SOUND_MIXER_BASS) +#define SOUND_MIXER_WRITE_TREBLE MIXER_WRITE(SOUND_MIXER_TREBLE) +#define SOUND_MIXER_WRITE_SYNTH MIXER_WRITE(SOUND_MIXER_SYNTH) +#define SOUND_MIXER_WRITE_PCM MIXER_WRITE(SOUND_MIXER_PCM) +#define SOUND_MIXER_WRITE_SPEAKER MIXER_WRITE(SOUND_MIXER_SPEAKER) +#define SOUND_MIXER_WRITE_LINE MIXER_WRITE(SOUND_MIXER_LINE) +#define SOUND_MIXER_WRITE_MIC MIXER_WRITE(SOUND_MIXER_MIC) +#define SOUND_MIXER_WRITE_CD MIXER_WRITE(SOUND_MIXER_CD) +#define SOUND_MIXER_WRITE_IMIX MIXER_WRITE(SOUND_MIXER_IMIX) +#define SOUND_MIXER_WRITE_ALTPCM MIXER_WRITE(SOUND_MIXER_ALTPCM) +#define SOUND_MIXER_WRITE_RECLEV MIXER_WRITE(SOUND_MIXER_RECLEV) +#define SOUND_MIXER_WRITE_IGAIN MIXER_WRITE(SOUND_MIXER_IGAIN) +#define SOUND_MIXER_WRITE_OGAIN MIXER_WRITE(SOUND_MIXER_OGAIN) +#define SOUND_MIXER_WRITE_LINE1 MIXER_WRITE(SOUND_MIXER_LINE1) +#define SOUND_MIXER_WRITE_LINE2 MIXER_WRITE(SOUND_MIXER_LINE2) +#define SOUND_MIXER_WRITE_LINE3 MIXER_WRITE(SOUND_MIXER_LINE3) + +/* Obsolete macros */ +#define SOUND_MIXER_WRITE_MUTE MIXER_WRITE(SOUND_MIXER_MUTE) +#define SOUND_MIXER_WRITE_ENHANCE MIXER_WRITE(SOUND_MIXER_ENHANCE) +#define SOUND_MIXER_WRITE_LOUD MIXER_WRITE(SOUND_MIXER_LOUD) + +#define SOUND_MIXER_WRITE_RECSRC MIXER_WRITE(SOUND_MIXER_RECSRC) + +typedef struct mixer_info +{ + char id[16]; + char name[32]; + int modify_counter; + int fillers[10]; +} mixer_info; + +typedef struct _old_mixer_info /* Obsolete */ +{ + char id[16]; + char name[32]; +} _old_mixer_info; + +#define SOUND_MIXER_INFO _SIOR ('M', 101, mixer_info) +#define SOUND_OLD_MIXER_INFO _SIOR ('M', 101, _old_mixer_info) + +/* + * A mechanism for accessing "proprietary" mixer features. This method + * permits passing 128 bytes of arbitrary data between a mixer application + * and the mixer driver. Interpretation of the record is defined by + * the particular mixer driver. + */ +typedef unsigned char mixer_record[128]; + +#define SOUND_MIXER_ACCESS _SIOWR('M', 102, mixer_record) + +/* + * Two ioctls for special souncard function + */ +#define SOUND_MIXER_AGC _SIOWR('M', 103, int) +#define SOUND_MIXER_3DSE _SIOWR('M', 104, int) + +/* + * The SOUND_MIXER_PRIVATE# commands can be redefined by low level drivers. + * These features can be used when accessing device specific features. + */ +#define SOUND_MIXER_PRIVATE1 _SIOWR('M', 111, int) +#define SOUND_MIXER_PRIVATE2 _SIOWR('M', 112, int) +#define SOUND_MIXER_PRIVATE3 _SIOWR('M', 113, int) +#define SOUND_MIXER_PRIVATE4 _SIOWR('M', 114, int) +#define SOUND_MIXER_PRIVATE5 _SIOWR('M', 115, int) + +/* + * SOUND_MIXER_GETLEVELS and SOUND_MIXER_SETLEVELS calls can be used + * for querying current mixer settings from the driver and for loading + * default volume settings _prior_ activating the mixer (loading + * doesn't affect current state of the mixer hardware). These calls + * are for internal use only. + */ + +typedef struct mixer_vol_table { + int num; /* Index to volume table */ + char name[32]; + int levels[32]; +} mixer_vol_table; + +#define SOUND_MIXER_GETLEVELS _SIOWR('M', 116, mixer_vol_table) +#define SOUND_MIXER_SETLEVELS _SIOWR('M', 117, mixer_vol_table) + +/* + * An ioctl for identifying the driver version. It will return value + * of the SOUND_VERSION macro used when compiling the driver. + * This call was introduced in OSS version 3.6 and it will not work + * with earlier versions (returns EINVAL). + */ +#define OSS_GETVERSION _SIOR ('M', 118, int) + +/* + * Level 2 event types for /dev/sequencer + */ + +/* + * The 4 most significant bits of byte 0 specify the class of + * the event: + * + * 0x8X = system level events, + * 0x9X = device/port specific events, event[1] = device/port, + * The last 4 bits give the subtype: + * 0x02 = Channel event (event[3] = chn). + * 0x01 = note event (event[4] = note). + * (0x01 is not used alone but always with bit 0x02). + * event[2] = MIDI message code (0x80=note off etc.) + * + */ + +#define EV_SEQ_LOCAL 0x80 +#define EV_TIMING 0x81 +#define EV_CHN_COMMON 0x92 +#define EV_CHN_VOICE 0x93 +#define EV_SYSEX 0x94 +/* + * Event types 200 to 220 are reserved for application use. + * These numbers will not be used by the driver. + */ + +/* + * Events for event type EV_CHN_VOICE + */ + +#define MIDI_NOTEOFF 0x80 +#define MIDI_NOTEON 0x90 +#define MIDI_KEY_PRESSURE 0xA0 + +/* + * Events for event type EV_CHN_COMMON + */ + +#define MIDI_CTL_CHANGE 0xB0 +#define MIDI_PGM_CHANGE 0xC0 +#define MIDI_CHN_PRESSURE 0xD0 +#define MIDI_PITCH_BEND 0xE0 + +#define MIDI_SYSTEM_PREFIX 0xF0 + +/* + * Timer event types + */ +#define TMR_WAIT_REL 1 /* Time relative to the prev time */ +#define TMR_WAIT_ABS 2 /* Absolute time since TMR_START */ +#define TMR_STOP 3 +#define TMR_START 4 +#define TMR_CONTINUE 5 +#define TMR_TEMPO 6 +#define TMR_ECHO 8 +#define TMR_CLOCK 9 /* MIDI clock */ +#define TMR_SPP 10 /* Song position pointer */ +#define TMR_TIMESIG 11 /* Time signature */ + +/* + * Local event types + */ +#define LOCL_STARTAUDIO 1 + +#if !defined(__KERNEL__) || defined(USE_SEQ_MACROS) +/* + * Some convenience macros to simplify programming of the + * /dev/sequencer interface + * + * This is a legacy interface for applications written against + * the OSSlib-3.8 style interface. It is no longer possible + * to actually link against OSSlib with this header, but we + * still provide these macros for programs using them. + * + * If you want to use OSSlib, it is recommended that you get + * the GPL version of OSS-4.x and build against that version + * of the header. + * + * We redefine the extern keyword so that make headers_check + * does not complain about SEQ_USE_EXTBUF. + */ +#define SEQ_DECLAREBUF() SEQ_USE_EXTBUF() + +void seqbuf_dump(void); /* This function must be provided by programs */ + +#define SEQ_PM_DEFINES int __foo_bar___ + +#define SEQ_LOAD_GMINSTR(dev, instr) +#define SEQ_LOAD_GMDRUM(dev, drum) + +#define _SEQ_EXTERN extern +#define SEQ_USE_EXTBUF() \ + _SEQ_EXTERN unsigned char _seqbuf[]; \ + _SEQ_EXTERN int _seqbuflen; _SEQ_EXTERN int _seqbufptr + +#ifndef USE_SIMPLE_MACROS +/* Sample seqbuf_dump() implementation: + * + * SEQ_DEFINEBUF (2048); -- Defines a buffer for 2048 bytes + * + * int seqfd; -- The file descriptor for /dev/sequencer. + * + * void + * seqbuf_dump () + * { + * if (_seqbufptr) + * if (write (seqfd, _seqbuf, _seqbufptr) == -1) + * { + * perror ("write /dev/sequencer"); + * exit (-1); + * } + * _seqbufptr = 0; + * } + */ + +#define SEQ_DEFINEBUF(len) unsigned char _seqbuf[len]; int _seqbuflen = len;int _seqbufptr = 0 +#define _SEQ_NEEDBUF(len) if ((_seqbufptr+(len)) > _seqbuflen) seqbuf_dump() +#define _SEQ_ADVBUF(len) _seqbufptr += len +#define SEQ_DUMPBUF seqbuf_dump +#else +/* + * This variation of the sequencer macros is used just to format one event + * using fixed buffer. + * + * The program using the macro library must define the following macros before + * using this library. + * + * #define _seqbuf name of the buffer (unsigned char[]) + * #define _SEQ_ADVBUF(len) If the applic needs to know the exact + * size of the event, this macro can be used. + * Otherwise this must be defined as empty. + * #define _seqbufptr Define the name of index variable or 0 if + * not required. + */ +#define _SEQ_NEEDBUF(len) /* empty */ +#endif + +#define SEQ_VOLUME_MODE(dev, mode) {_SEQ_NEEDBUF(8);\ + _seqbuf[_seqbufptr] = SEQ_EXTENDED;\ + _seqbuf[_seqbufptr+1] = SEQ_VOLMODE;\ + _seqbuf[_seqbufptr+2] = (dev);\ + _seqbuf[_seqbufptr+3] = (mode);\ + _seqbuf[_seqbufptr+4] = 0;\ + _seqbuf[_seqbufptr+5] = 0;\ + _seqbuf[_seqbufptr+6] = 0;\ + _seqbuf[_seqbufptr+7] = 0;\ + _SEQ_ADVBUF(8);} + +/* + * Midi voice messages + */ + +#define _CHN_VOICE(dev, event, chn, note, parm) \ + {_SEQ_NEEDBUF(8);\ + _seqbuf[_seqbufptr] = EV_CHN_VOICE;\ + _seqbuf[_seqbufptr+1] = (dev);\ + _seqbuf[_seqbufptr+2] = (event);\ + _seqbuf[_seqbufptr+3] = (chn);\ + _seqbuf[_seqbufptr+4] = (note);\ + _seqbuf[_seqbufptr+5] = (parm);\ + _seqbuf[_seqbufptr+6] = (0);\ + _seqbuf[_seqbufptr+7] = 0;\ + _SEQ_ADVBUF(8);} + +#define SEQ_START_NOTE(dev, chn, note, vol) \ + _CHN_VOICE(dev, MIDI_NOTEON, chn, note, vol) + +#define SEQ_STOP_NOTE(dev, chn, note, vol) \ + _CHN_VOICE(dev, MIDI_NOTEOFF, chn, note, vol) + +#define SEQ_KEY_PRESSURE(dev, chn, note, pressure) \ + _CHN_VOICE(dev, MIDI_KEY_PRESSURE, chn, note, pressure) + +/* + * Midi channel messages + */ + +#define _CHN_COMMON(dev, event, chn, p1, p2, w14) \ + {_SEQ_NEEDBUF(8);\ + _seqbuf[_seqbufptr] = EV_CHN_COMMON;\ + _seqbuf[_seqbufptr+1] = (dev);\ + _seqbuf[_seqbufptr+2] = (event);\ + _seqbuf[_seqbufptr+3] = (chn);\ + _seqbuf[_seqbufptr+4] = (p1);\ + _seqbuf[_seqbufptr+5] = (p2);\ + *(short *)&_seqbuf[_seqbufptr+6] = (w14);\ + _SEQ_ADVBUF(8);} +/* + * SEQ_SYSEX permits sending of sysex messages. (It may look that it permits + * sending any MIDI bytes but it's absolutely not possible. Trying to do + * so _will_ cause problems with MPU401 intelligent mode). + * + * Sysex messages are sent in blocks of 1 to 6 bytes. Longer messages must be + * sent by calling SEQ_SYSEX() several times (there must be no other events + * between them). First sysex fragment must have 0xf0 in the first byte + * and the last byte (buf[len-1] of the last fragment must be 0xf7. No byte + * between these sysex start and end markers cannot be larger than 0x7f. Also + * lengths of each fragments (except the last one) must be 6. + * + * Breaking the above rules may work with some MIDI ports but is likely to + * cause fatal problems with some other devices (such as MPU401). + */ +#define SEQ_SYSEX(dev, buf, len) \ + {int ii, ll=(len); \ + unsigned char *bufp=buf;\ + if (ll>6)ll=6;\ + _SEQ_NEEDBUF(8);\ + _seqbuf[_seqbufptr] = EV_SYSEX;\ + _seqbuf[_seqbufptr+1] = (dev);\ + for(ii=0;ii<ll;ii++)\ + _seqbuf[_seqbufptr+ii+2] = bufp[ii];\ + for(ii=ll;ii<6;ii++)\ + _seqbuf[_seqbufptr+ii+2] = 0xff;\ + _SEQ_ADVBUF(8);} + +#define SEQ_CHN_PRESSURE(dev, chn, pressure) \ + _CHN_COMMON(dev, MIDI_CHN_PRESSURE, chn, pressure, 0, 0) + +#define SEQ_SET_PATCH SEQ_PGM_CHANGE +#define SEQ_PGM_CHANGE(dev, chn, patch) \ + _CHN_COMMON(dev, MIDI_PGM_CHANGE, chn, patch, 0, 0) + +#define SEQ_CONTROL(dev, chn, controller, value) \ + _CHN_COMMON(dev, MIDI_CTL_CHANGE, chn, controller, 0, value) + +#define SEQ_BENDER(dev, chn, value) \ + _CHN_COMMON(dev, MIDI_PITCH_BEND, chn, 0, 0, value) + + +#define SEQ_V2_X_CONTROL(dev, voice, controller, value) {_SEQ_NEEDBUF(8);\ + _seqbuf[_seqbufptr] = SEQ_EXTENDED;\ + _seqbuf[_seqbufptr+1] = SEQ_CONTROLLER;\ + _seqbuf[_seqbufptr+2] = (dev);\ + _seqbuf[_seqbufptr+3] = (voice);\ + _seqbuf[_seqbufptr+4] = (controller);\ + _seqbuf[_seqbufptr+5] = ((value)&0xff);\ + _seqbuf[_seqbufptr+6] = ((value>>8)&0xff);\ + _seqbuf[_seqbufptr+7] = 0;\ + _SEQ_ADVBUF(8);} +/* + * The following 5 macros are incorrectly implemented and obsolete. + * Use SEQ_BENDER and SEQ_CONTROL (with proper controller) instead. + */ +#define SEQ_PITCHBEND(dev, voice, value) SEQ_V2_X_CONTROL(dev, voice, CTRL_PITCH_BENDER, value) +#define SEQ_BENDER_RANGE(dev, voice, value) SEQ_V2_X_CONTROL(dev, voice, CTRL_PITCH_BENDER_RANGE, value) +#define SEQ_EXPRESSION(dev, voice, value) SEQ_CONTROL(dev, voice, CTL_EXPRESSION, value*128) +#define SEQ_MAIN_VOLUME(dev, voice, value) SEQ_CONTROL(dev, voice, CTL_MAIN_VOLUME, (value*16383)/100) +#define SEQ_PANNING(dev, voice, pos) SEQ_CONTROL(dev, voice, CTL_PAN, (pos+128) / 2) + +/* + * Timing and synchronization macros + */ + +#define _TIMER_EVENT(ev, parm) {_SEQ_NEEDBUF(8);\ + _seqbuf[_seqbufptr+0] = EV_TIMING; \ + _seqbuf[_seqbufptr+1] = (ev); \ + _seqbuf[_seqbufptr+2] = 0;\ + _seqbuf[_seqbufptr+3] = 0;\ + *(unsigned int *)&_seqbuf[_seqbufptr+4] = (parm); \ + _SEQ_ADVBUF(8);} + +#define SEQ_START_TIMER() _TIMER_EVENT(TMR_START, 0) +#define SEQ_STOP_TIMER() _TIMER_EVENT(TMR_STOP, 0) +#define SEQ_CONTINUE_TIMER() _TIMER_EVENT(TMR_CONTINUE, 0) +#define SEQ_WAIT_TIME(ticks) _TIMER_EVENT(TMR_WAIT_ABS, ticks) +#define SEQ_DELTA_TIME(ticks) _TIMER_EVENT(TMR_WAIT_REL, ticks) +#define SEQ_ECHO_BACK(key) _TIMER_EVENT(TMR_ECHO, key) +#define SEQ_SET_TEMPO(value) _TIMER_EVENT(TMR_TEMPO, value) +#define SEQ_SONGPOS(pos) _TIMER_EVENT(TMR_SPP, pos) +#define SEQ_TIME_SIGNATURE(sig) _TIMER_EVENT(TMR_TIMESIG, sig) + +/* + * Local control events + */ + +#define _LOCAL_EVENT(ev, parm) {_SEQ_NEEDBUF(8);\ + _seqbuf[_seqbufptr+0] = EV_SEQ_LOCAL; \ + _seqbuf[_seqbufptr+1] = (ev); \ + _seqbuf[_seqbufptr+2] = 0;\ + _seqbuf[_seqbufptr+3] = 0;\ + *(unsigned int *)&_seqbuf[_seqbufptr+4] = (parm); \ + _SEQ_ADVBUF(8);} + +#define SEQ_PLAYAUDIO(devmask) _LOCAL_EVENT(LOCL_STARTAUDIO, devmask) +/* + * Events for the level 1 interface only + */ + +#define SEQ_MIDIOUT(device, byte) {_SEQ_NEEDBUF(4);\ + _seqbuf[_seqbufptr] = SEQ_MIDIPUTC;\ + _seqbuf[_seqbufptr+1] = (byte);\ + _seqbuf[_seqbufptr+2] = (device);\ + _seqbuf[_seqbufptr+3] = 0;\ + _SEQ_ADVBUF(4);} + +/* + * Patch loading. + */ +#define SEQ_WRPATCH(patchx, len) \ + {if (_seqbufptr) SEQ_DUMPBUF();\ + if (write(seqfd, (char*)(patchx), len)==-1) \ + perror("Write patch: /dev/sequencer");} +#define SEQ_WRPATCH2(patchx, len) \ + (SEQ_DUMPBUF(), write(seqfd, (char*)(patchx), len)) + +#endif +#endif /* _UAPISOUNDCARD_H */ diff --git a/include/uapi/linux/spi/Kbuild b/include/uapi/linux/spi/Kbuild index aafaa5aa54d..0cc747eff16 100644 --- a/include/uapi/linux/spi/Kbuild +++ b/include/uapi/linux/spi/Kbuild @@ -1 +1,2 @@ # UAPI Header export list +header-y += spidev.h diff --git a/include/linux/spi/spidev.h b/include/uapi/linux/spi/spidev.h index 52d9ed01855..52d9ed01855 100644 --- a/include/linux/spi/spidev.h +++ b/include/uapi/linux/spi/spidev.h diff --git a/include/uapi/linux/stat.h b/include/uapi/linux/stat.h new file mode 100644 index 00000000000..7fec7e36d92 --- /dev/null +++ b/include/uapi/linux/stat.h @@ -0,0 +1,45 @@ +#ifndef _UAPI_LINUX_STAT_H +#define _UAPI_LINUX_STAT_H + + +#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) + +#define S_IFMT 00170000 +#define S_IFSOCK 0140000 +#define S_IFLNK 0120000 +#define S_IFREG 0100000 +#define S_IFBLK 0060000 +#define S_IFDIR 0040000 +#define S_IFCHR 0020000 +#define S_IFIFO 0010000 +#define S_ISUID 0004000 +#define S_ISGID 0002000 +#define S_ISVTX 0001000 + +#define S_ISLNK(m) (((m) & S_IFMT) == S_IFLNK) +#define S_ISREG(m) (((m) & S_IFMT) == S_IFREG) +#define S_ISDIR(m) (((m) & S_IFMT) == S_IFDIR) +#define S_ISCHR(m) (((m) & S_IFMT) == S_IFCHR) +#define S_ISBLK(m) (((m) & S_IFMT) == S_IFBLK) +#define S_ISFIFO(m) (((m) & S_IFMT) == S_IFIFO) +#define S_ISSOCK(m) (((m) & S_IFMT) == S_IFSOCK) + +#define S_IRWXU 00700 +#define S_IRUSR 00400 +#define S_IWUSR 00200 +#define S_IXUSR 00100 + +#define S_IRWXG 00070 +#define S_IRGRP 00040 +#define S_IWGRP 00020 +#define S_IXGRP 00010 + +#define S_IRWXO 00007 +#define S_IROTH 00004 +#define S_IWOTH 00002 +#define S_IXOTH 00001 + +#endif + + +#endif /* _UAPI_LINUX_STAT_H */ diff --git a/include/uapi/linux/stddef.h b/include/uapi/linux/stddef.h new file mode 100644 index 00000000000..aa9f1042874 --- /dev/null +++ b/include/uapi/linux/stddef.h @@ -0,0 +1 @@ +#include <linux/compiler.h> diff --git a/include/uapi/linux/string.h b/include/uapi/linux/string.h new file mode 100644 index 00000000000..e32e545cff5 --- /dev/null +++ b/include/uapi/linux/string.h @@ -0,0 +1,9 @@ +#ifndef _UAPI_LINUX_STRING_H_ +#define _UAPI_LINUX_STRING_H_ + +/* We don't want strings.h stuff being used by user stuff by accident */ + +#ifndef __KERNEL__ +#include <string.h> +#endif /* __KERNEL__ */ +#endif /* _UAPI_LINUX_STRING_H_ */ diff --git a/include/uapi/linux/sunrpc/Kbuild b/include/uapi/linux/sunrpc/Kbuild index aafaa5aa54d..8e02e47c20f 100644 --- a/include/uapi/linux/sunrpc/Kbuild +++ b/include/uapi/linux/sunrpc/Kbuild @@ -1 +1,2 @@ # UAPI Header export list +header-y += debug.h diff --git a/include/uapi/linux/sunrpc/debug.h b/include/uapi/linux/sunrpc/debug.h new file mode 100644 index 00000000000..830e34493a8 --- /dev/null +++ b/include/uapi/linux/sunrpc/debug.h @@ -0,0 +1,48 @@ +/* + * linux/include/linux/sunrpc/debug.h + * + * Debugging support for sunrpc module + * + * Copyright (C) 1996, Olaf Kirch <okir@monad.swb.de> + */ + +#ifndef _UAPI_LINUX_SUNRPC_DEBUG_H_ +#define _UAPI_LINUX_SUNRPC_DEBUG_H_ + +/* + * RPC debug facilities + */ +#define RPCDBG_XPRT 0x0001 +#define RPCDBG_CALL 0x0002 +#define RPCDBG_DEBUG 0x0004 +#define RPCDBG_NFS 0x0008 +#define RPCDBG_AUTH 0x0010 +#define RPCDBG_BIND 0x0020 +#define RPCDBG_SCHED 0x0040 +#define RPCDBG_TRANS 0x0080 +#define RPCDBG_SVCXPRT 0x0100 +#define RPCDBG_SVCDSP 0x0200 +#define RPCDBG_MISC 0x0400 +#define RPCDBG_CACHE 0x0800 +#define RPCDBG_ALL 0x7fff + + +/* + * Declarations for the sysctl debug interface, which allows to read or + * change the debug flags for rpc, nfs, nfsd, and lockd. Since the sunrpc + * module currently registers its sysctl table dynamically, the sysctl path + * for module FOO is <CTL_SUNRPC, CTL_FOODEBUG>. + */ + +enum { + CTL_RPCDEBUG = 1, + CTL_NFSDEBUG, + CTL_NFSDDEBUG, + CTL_NLMDEBUG, + CTL_SLOTTABLE_UDP, + CTL_SLOTTABLE_TCP, + CTL_MIN_RESVPORT, + CTL_MAX_RESVPORT, +}; + +#endif /* _UAPI_LINUX_SUNRPC_DEBUG_H_ */ diff --git a/include/linux/suspend_ioctls.h b/include/uapi/linux/suspend_ioctls.h index 0b30382984f..0b30382984f 100644 --- a/include/linux/suspend_ioctls.h +++ b/include/uapi/linux/suspend_ioctls.h diff --git a/include/uapi/linux/swab.h b/include/uapi/linux/swab.h new file mode 100644 index 00000000000..e811474724c --- /dev/null +++ b/include/uapi/linux/swab.h @@ -0,0 +1,282 @@ +#ifndef _UAPI_LINUX_SWAB_H +#define _UAPI_LINUX_SWAB_H + +#include <linux/types.h> +#include <linux/compiler.h> +#include <asm/swab.h> + +/* + * casts are necessary for constants, because we never know how for sure + * how U/UL/ULL map to __u16, __u32, __u64. At least not in a portable way. + */ +#define ___constant_swab16(x) ((__u16)( \ + (((__u16)(x) & (__u16)0x00ffU) << 8) | \ + (((__u16)(x) & (__u16)0xff00U) >> 8))) + +#define ___constant_swab32(x) ((__u32)( \ + (((__u32)(x) & (__u32)0x000000ffUL) << 24) | \ + (((__u32)(x) & (__u32)0x0000ff00UL) << 8) | \ + (((__u32)(x) & (__u32)0x00ff0000UL) >> 8) | \ + (((__u32)(x) & (__u32)0xff000000UL) >> 24))) + +#define ___constant_swab64(x) ((__u64)( \ + (((__u64)(x) & (__u64)0x00000000000000ffULL) << 56) | \ + (((__u64)(x) & (__u64)0x000000000000ff00ULL) << 40) | \ + (((__u64)(x) & (__u64)0x0000000000ff0000ULL) << 24) | \ + (((__u64)(x) & (__u64)0x00000000ff000000ULL) << 8) | \ + (((__u64)(x) & (__u64)0x000000ff00000000ULL) >> 8) | \ + (((__u64)(x) & (__u64)0x0000ff0000000000ULL) >> 24) | \ + (((__u64)(x) & (__u64)0x00ff000000000000ULL) >> 40) | \ + (((__u64)(x) & (__u64)0xff00000000000000ULL) >> 56))) + +#define ___constant_swahw32(x) ((__u32)( \ + (((__u32)(x) & (__u32)0x0000ffffUL) << 16) | \ + (((__u32)(x) & (__u32)0xffff0000UL) >> 16))) + +#define ___constant_swahb32(x) ((__u32)( \ + (((__u32)(x) & (__u32)0x00ff00ffUL) << 8) | \ + (((__u32)(x) & (__u32)0xff00ff00UL) >> 8))) + +/* + * Implement the following as inlines, but define the interface using + * macros to allow constant folding when possible: + * ___swab16, ___swab32, ___swab64, ___swahw32, ___swahb32 + */ + +static inline __attribute_const__ __u16 __fswab16(__u16 val) +{ +#ifdef __arch_swab16 + return __arch_swab16(val); +#else + return ___constant_swab16(val); +#endif +} + +static inline __attribute_const__ __u32 __fswab32(__u32 val) +{ +#ifdef __arch_swab32 + return __arch_swab32(val); +#else + return ___constant_swab32(val); +#endif +} + +static inline __attribute_const__ __u64 __fswab64(__u64 val) +{ +#ifdef __arch_swab64 + return __arch_swab64(val); +#elif defined(__SWAB_64_THRU_32__) + __u32 h = val >> 32; + __u32 l = val & ((1ULL << 32) - 1); + return (((__u64)__fswab32(l)) << 32) | ((__u64)(__fswab32(h))); +#else + return ___constant_swab64(val); +#endif +} + +static inline __attribute_const__ __u32 __fswahw32(__u32 val) +{ +#ifdef __arch_swahw32 + return __arch_swahw32(val); +#else + return ___constant_swahw32(val); +#endif +} + +static inline __attribute_const__ __u32 __fswahb32(__u32 val) +{ +#ifdef __arch_swahb32 + return __arch_swahb32(val); +#else + return ___constant_swahb32(val); +#endif +} + +/** + * __swab16 - return a byteswapped 16-bit value + * @x: value to byteswap + */ +#define __swab16(x) \ + (__builtin_constant_p((__u16)(x)) ? \ + ___constant_swab16(x) : \ + __fswab16(x)) + +/** + * __swab32 - return a byteswapped 32-bit value + * @x: value to byteswap + */ +#define __swab32(x) \ + (__builtin_constant_p((__u32)(x)) ? \ + ___constant_swab32(x) : \ + __fswab32(x)) + +/** + * __swab64 - return a byteswapped 64-bit value + * @x: value to byteswap + */ +#define __swab64(x) \ + (__builtin_constant_p((__u64)(x)) ? \ + ___constant_swab64(x) : \ + __fswab64(x)) + +/** + * __swahw32 - return a word-swapped 32-bit value + * @x: value to wordswap + * + * __swahw32(0x12340000) is 0x00001234 + */ +#define __swahw32(x) \ + (__builtin_constant_p((__u32)(x)) ? \ + ___constant_swahw32(x) : \ + __fswahw32(x)) + +/** + * __swahb32 - return a high and low byte-swapped 32-bit value + * @x: value to byteswap + * + * __swahb32(0x12345678) is 0x34127856 + */ +#define __swahb32(x) \ + (__builtin_constant_p((__u32)(x)) ? \ + ___constant_swahb32(x) : \ + __fswahb32(x)) + +/** + * __swab16p - return a byteswapped 16-bit value from a pointer + * @p: pointer to a naturally-aligned 16-bit value + */ +static inline __u16 __swab16p(const __u16 *p) +{ +#ifdef __arch_swab16p + return __arch_swab16p(p); +#else + return __swab16(*p); +#endif +} + +/** + * __swab32p - return a byteswapped 32-bit value from a pointer + * @p: pointer to a naturally-aligned 32-bit value + */ +static inline __u32 __swab32p(const __u32 *p) +{ +#ifdef __arch_swab32p + return __arch_swab32p(p); +#else + return __swab32(*p); +#endif +} + +/** + * __swab64p - return a byteswapped 64-bit value from a pointer + * @p: pointer to a naturally-aligned 64-bit value + */ +static inline __u64 __swab64p(const __u64 *p) +{ +#ifdef __arch_swab64p + return __arch_swab64p(p); +#else + return __swab64(*p); +#endif +} + +/** + * __swahw32p - return a wordswapped 32-bit value from a pointer + * @p: pointer to a naturally-aligned 32-bit value + * + * See __swahw32() for details of wordswapping. + */ +static inline __u32 __swahw32p(const __u32 *p) +{ +#ifdef __arch_swahw32p + return __arch_swahw32p(p); +#else + return __swahw32(*p); +#endif +} + +/** + * __swahb32p - return a high and low byteswapped 32-bit value from a pointer + * @p: pointer to a naturally-aligned 32-bit value + * + * See __swahb32() for details of high/low byteswapping. + */ +static inline __u32 __swahb32p(const __u32 *p) +{ +#ifdef __arch_swahb32p + return __arch_swahb32p(p); +#else + return __swahb32(*p); +#endif +} + +/** + * __swab16s - byteswap a 16-bit value in-place + * @p: pointer to a naturally-aligned 16-bit value + */ +static inline void __swab16s(__u16 *p) +{ +#ifdef __arch_swab16s + __arch_swab16s(p); +#else + *p = __swab16p(p); +#endif +} +/** + * __swab32s - byteswap a 32-bit value in-place + * @p: pointer to a naturally-aligned 32-bit value + */ +static inline void __swab32s(__u32 *p) +{ +#ifdef __arch_swab32s + __arch_swab32s(p); +#else + *p = __swab32p(p); +#endif +} + +/** + * __swab64s - byteswap a 64-bit value in-place + * @p: pointer to a naturally-aligned 64-bit value + */ +static inline void __swab64s(__u64 *p) +{ +#ifdef __arch_swab64s + __arch_swab64s(p); +#else + *p = __swab64p(p); +#endif +} + +/** + * __swahw32s - wordswap a 32-bit value in-place + * @p: pointer to a naturally-aligned 32-bit value + * + * See __swahw32() for details of wordswapping + */ +static inline void __swahw32s(__u32 *p) +{ +#ifdef __arch_swahw32s + __arch_swahw32s(p); +#else + *p = __swahw32p(p); +#endif +} + +/** + * __swahb32s - high and low byteswap a 32-bit value in-place + * @p: pointer to a naturally-aligned 32-bit value + * + * See __swahb32() for details of high and low byte swapping + */ +static inline void __swahb32s(__u32 *p) +{ +#ifdef __arch_swahb32s + __arch_swahb32s(p); +#else + *p = __swahb32p(p); +#endif +} + + +#endif /* _UAPI_LINUX_SWAB_H */ diff --git a/include/uapi/linux/synclink.h b/include/uapi/linux/synclink.h new file mode 100644 index 00000000000..7dcb065a5f7 --- /dev/null +++ b/include/uapi/linux/synclink.h @@ -0,0 +1,300 @@ +/* + * SyncLink Multiprotocol Serial Adapter Driver + * + * $Id: synclink.h,v 3.14 2006/07/17 20:15:43 paulkf Exp $ + * + * Copyright (C) 1998-2000 by Microgate Corporation + * + * Redistribution of this file is permitted under + * the terms of the GNU Public License (GPL) + */ + +#ifndef _UAPI_SYNCLINK_H_ +#define _UAPI_SYNCLINK_H_ +#define SYNCLINK_H_VERSION 3.6 + +#include <linux/types.h> + +#define BIT0 0x0001 +#define BIT1 0x0002 +#define BIT2 0x0004 +#define BIT3 0x0008 +#define BIT4 0x0010 +#define BIT5 0x0020 +#define BIT6 0x0040 +#define BIT7 0x0080 +#define BIT8 0x0100 +#define BIT9 0x0200 +#define BIT10 0x0400 +#define BIT11 0x0800 +#define BIT12 0x1000 +#define BIT13 0x2000 +#define BIT14 0x4000 +#define BIT15 0x8000 +#define BIT16 0x00010000 +#define BIT17 0x00020000 +#define BIT18 0x00040000 +#define BIT19 0x00080000 +#define BIT20 0x00100000 +#define BIT21 0x00200000 +#define BIT22 0x00400000 +#define BIT23 0x00800000 +#define BIT24 0x01000000 +#define BIT25 0x02000000 +#define BIT26 0x04000000 +#define BIT27 0x08000000 +#define BIT28 0x10000000 +#define BIT29 0x20000000 +#define BIT30 0x40000000 +#define BIT31 0x80000000 + + +#define HDLC_MAX_FRAME_SIZE 65535 +#define MAX_ASYNC_TRANSMIT 4096 +#define MAX_ASYNC_BUFFER_SIZE 4096 + +#define ASYNC_PARITY_NONE 0 +#define ASYNC_PARITY_EVEN 1 +#define ASYNC_PARITY_ODD 2 +#define ASYNC_PARITY_SPACE 3 + +#define HDLC_FLAG_UNDERRUN_ABORT7 0x0000 +#define HDLC_FLAG_UNDERRUN_ABORT15 0x0001 +#define HDLC_FLAG_UNDERRUN_FLAG 0x0002 +#define HDLC_FLAG_UNDERRUN_CRC 0x0004 +#define HDLC_FLAG_SHARE_ZERO 0x0010 +#define HDLC_FLAG_AUTO_CTS 0x0020 +#define HDLC_FLAG_AUTO_DCD 0x0040 +#define HDLC_FLAG_AUTO_RTS 0x0080 +#define HDLC_FLAG_RXC_DPLL 0x0100 +#define HDLC_FLAG_RXC_BRG 0x0200 +#define HDLC_FLAG_RXC_TXCPIN 0x8000 +#define HDLC_FLAG_RXC_RXCPIN 0x0000 +#define HDLC_FLAG_TXC_DPLL 0x0400 +#define HDLC_FLAG_TXC_BRG 0x0800 +#define HDLC_FLAG_TXC_TXCPIN 0x0000 +#define HDLC_FLAG_TXC_RXCPIN 0x0008 +#define HDLC_FLAG_DPLL_DIV8 0x1000 +#define HDLC_FLAG_DPLL_DIV16 0x2000 +#define HDLC_FLAG_DPLL_DIV32 0x0000 +#define HDLC_FLAG_HDLC_LOOPMODE 0x4000 + +#define HDLC_CRC_NONE 0 +#define HDLC_CRC_16_CCITT 1 +#define HDLC_CRC_32_CCITT 2 +#define HDLC_CRC_MASK 0x00ff +#define HDLC_CRC_RETURN_EX 0x8000 + +#define RX_OK 0 +#define RX_CRC_ERROR 1 + +#define HDLC_TXIDLE_FLAGS 0 +#define HDLC_TXIDLE_ALT_ZEROS_ONES 1 +#define HDLC_TXIDLE_ZEROS 2 +#define HDLC_TXIDLE_ONES 3 +#define HDLC_TXIDLE_ALT_MARK_SPACE 4 +#define HDLC_TXIDLE_SPACE 5 +#define HDLC_TXIDLE_MARK 6 +#define HDLC_TXIDLE_CUSTOM_8 0x10000000 +#define HDLC_TXIDLE_CUSTOM_16 0x20000000 + +#define HDLC_ENCODING_NRZ 0 +#define HDLC_ENCODING_NRZB 1 +#define HDLC_ENCODING_NRZI_MARK 2 +#define HDLC_ENCODING_NRZI_SPACE 3 +#define HDLC_ENCODING_NRZI HDLC_ENCODING_NRZI_SPACE +#define HDLC_ENCODING_BIPHASE_MARK 4 +#define HDLC_ENCODING_BIPHASE_SPACE 5 +#define HDLC_ENCODING_BIPHASE_LEVEL 6 +#define HDLC_ENCODING_DIFF_BIPHASE_LEVEL 7 + +#define HDLC_PREAMBLE_LENGTH_8BITS 0 +#define HDLC_PREAMBLE_LENGTH_16BITS 1 +#define HDLC_PREAMBLE_LENGTH_32BITS 2 +#define HDLC_PREAMBLE_LENGTH_64BITS 3 + +#define HDLC_PREAMBLE_PATTERN_NONE 0 +#define HDLC_PREAMBLE_PATTERN_ZEROS 1 +#define HDLC_PREAMBLE_PATTERN_FLAGS 2 +#define HDLC_PREAMBLE_PATTERN_10 3 +#define HDLC_PREAMBLE_PATTERN_01 4 +#define HDLC_PREAMBLE_PATTERN_ONES 5 + +#define MGSL_MODE_ASYNC 1 +#define MGSL_MODE_HDLC 2 +#define MGSL_MODE_MONOSYNC 3 +#define MGSL_MODE_BISYNC 4 +#define MGSL_MODE_RAW 6 +#define MGSL_MODE_BASE_CLOCK 7 +#define MGSL_MODE_XSYNC 8 + +#define MGSL_BUS_TYPE_ISA 1 +#define MGSL_BUS_TYPE_EISA 2 +#define MGSL_BUS_TYPE_PCI 5 + +#define MGSL_INTERFACE_MASK 0xf +#define MGSL_INTERFACE_DISABLE 0 +#define MGSL_INTERFACE_RS232 1 +#define MGSL_INTERFACE_V35 2 +#define MGSL_INTERFACE_RS422 3 +#define MGSL_INTERFACE_RTS_EN 0x10 +#define MGSL_INTERFACE_LL 0x20 +#define MGSL_INTERFACE_RL 0x40 +#define MGSL_INTERFACE_MSB_FIRST 0x80 + +typedef struct _MGSL_PARAMS +{ + /* Common */ + + unsigned long mode; /* Asynchronous or HDLC */ + unsigned char loopback; /* internal loopback mode */ + + /* HDLC Only */ + + unsigned short flags; + unsigned char encoding; /* NRZ, NRZI, etc. */ + unsigned long clock_speed; /* external clock speed in bits per second */ + unsigned char addr_filter; /* receive HDLC address filter, 0xFF = disable */ + unsigned short crc_type; /* None, CRC16-CCITT, or CRC32-CCITT */ + unsigned char preamble_length; + unsigned char preamble; + + /* Async Only */ + + unsigned long data_rate; /* bits per second */ + unsigned char data_bits; /* 7 or 8 data bits */ + unsigned char stop_bits; /* 1 or 2 stop bits */ + unsigned char parity; /* none, even, or odd */ + +} MGSL_PARAMS, *PMGSL_PARAMS; + +#define MICROGATE_VENDOR_ID 0x13c0 +#define SYNCLINK_DEVICE_ID 0x0010 +#define MGSCC_DEVICE_ID 0x0020 +#define SYNCLINK_SCA_DEVICE_ID 0x0030 +#define SYNCLINK_GT_DEVICE_ID 0x0070 +#define SYNCLINK_GT4_DEVICE_ID 0x0080 +#define SYNCLINK_AC_DEVICE_ID 0x0090 +#define SYNCLINK_GT2_DEVICE_ID 0x00A0 +#define MGSL_MAX_SERIAL_NUMBER 30 + +/* +** device diagnostics status +*/ + +#define DiagStatus_OK 0 +#define DiagStatus_AddressFailure 1 +#define DiagStatus_AddressConflict 2 +#define DiagStatus_IrqFailure 3 +#define DiagStatus_IrqConflict 4 +#define DiagStatus_DmaFailure 5 +#define DiagStatus_DmaConflict 6 +#define DiagStatus_PciAdapterNotFound 7 +#define DiagStatus_CantAssignPciResources 8 +#define DiagStatus_CantAssignPciMemAddr 9 +#define DiagStatus_CantAssignPciIoAddr 10 +#define DiagStatus_CantAssignPciIrq 11 +#define DiagStatus_MemoryError 12 + +#define SerialSignal_DCD 0x01 /* Data Carrier Detect */ +#define SerialSignal_TXD 0x02 /* Transmit Data */ +#define SerialSignal_RI 0x04 /* Ring Indicator */ +#define SerialSignal_RXD 0x08 /* Receive Data */ +#define SerialSignal_CTS 0x10 /* Clear to Send */ +#define SerialSignal_RTS 0x20 /* Request to Send */ +#define SerialSignal_DSR 0x40 /* Data Set Ready */ +#define SerialSignal_DTR 0x80 /* Data Terminal Ready */ + + +/* + * Counters of the input lines (CTS, DSR, RI, CD) interrupts + */ +struct mgsl_icount { + __u32 cts, dsr, rng, dcd, tx, rx; + __u32 frame, parity, overrun, brk; + __u32 buf_overrun; + __u32 txok; + __u32 txunder; + __u32 txabort; + __u32 txtimeout; + __u32 rxshort; + __u32 rxlong; + __u32 rxabort; + __u32 rxover; + __u32 rxcrc; + __u32 rxok; + __u32 exithunt; + __u32 rxidle; +}; + +struct gpio_desc { + __u32 state; + __u32 smask; + __u32 dir; + __u32 dmask; +}; + +#define DEBUG_LEVEL_DATA 1 +#define DEBUG_LEVEL_ERROR 2 +#define DEBUG_LEVEL_INFO 3 +#define DEBUG_LEVEL_BH 4 +#define DEBUG_LEVEL_ISR 5 + +/* +** Event bit flags for use with MgslWaitEvent +*/ + +#define MgslEvent_DsrActive 0x0001 +#define MgslEvent_DsrInactive 0x0002 +#define MgslEvent_Dsr 0x0003 +#define MgslEvent_CtsActive 0x0004 +#define MgslEvent_CtsInactive 0x0008 +#define MgslEvent_Cts 0x000c +#define MgslEvent_DcdActive 0x0010 +#define MgslEvent_DcdInactive 0x0020 +#define MgslEvent_Dcd 0x0030 +#define MgslEvent_RiActive 0x0040 +#define MgslEvent_RiInactive 0x0080 +#define MgslEvent_Ri 0x00c0 +#define MgslEvent_ExitHuntMode 0x0100 +#define MgslEvent_IdleReceived 0x0200 + +/* Private IOCTL codes: + * + * MGSL_IOCSPARAMS set MGSL_PARAMS structure values + * MGSL_IOCGPARAMS get current MGSL_PARAMS structure values + * MGSL_IOCSTXIDLE set current transmit idle mode + * MGSL_IOCGTXIDLE get current transmit idle mode + * MGSL_IOCTXENABLE enable or disable transmitter + * MGSL_IOCRXENABLE enable or disable receiver + * MGSL_IOCTXABORT abort transmitting frame (HDLC) + * MGSL_IOCGSTATS return current statistics + * MGSL_IOCWAITEVENT wait for specified event to occur + * MGSL_LOOPTXDONE transmit in HDLC LoopMode done + * MGSL_IOCSIF set the serial interface type + * MGSL_IOCGIF get the serial interface type + */ +#define MGSL_MAGIC_IOC 'm' +#define MGSL_IOCSPARAMS _IOW(MGSL_MAGIC_IOC,0,struct _MGSL_PARAMS) +#define MGSL_IOCGPARAMS _IOR(MGSL_MAGIC_IOC,1,struct _MGSL_PARAMS) +#define MGSL_IOCSTXIDLE _IO(MGSL_MAGIC_IOC,2) +#define MGSL_IOCGTXIDLE _IO(MGSL_MAGIC_IOC,3) +#define MGSL_IOCTXENABLE _IO(MGSL_MAGIC_IOC,4) +#define MGSL_IOCRXENABLE _IO(MGSL_MAGIC_IOC,5) +#define MGSL_IOCTXABORT _IO(MGSL_MAGIC_IOC,6) +#define MGSL_IOCGSTATS _IO(MGSL_MAGIC_IOC,7) +#define MGSL_IOCWAITEVENT _IOWR(MGSL_MAGIC_IOC,8,int) +#define MGSL_IOCCLRMODCOUNT _IO(MGSL_MAGIC_IOC,15) +#define MGSL_IOCLOOPTXDONE _IO(MGSL_MAGIC_IOC,9) +#define MGSL_IOCSIF _IO(MGSL_MAGIC_IOC,10) +#define MGSL_IOCGIF _IO(MGSL_MAGIC_IOC,11) +#define MGSL_IOCSGPIO _IOW(MGSL_MAGIC_IOC,16,struct gpio_desc) +#define MGSL_IOCGGPIO _IOR(MGSL_MAGIC_IOC,17,struct gpio_desc) +#define MGSL_IOCWAITGPIO _IOWR(MGSL_MAGIC_IOC,18,struct gpio_desc) +#define MGSL_IOCSXSYNC _IO(MGSL_MAGIC_IOC, 19) +#define MGSL_IOCGXSYNC _IO(MGSL_MAGIC_IOC, 20) +#define MGSL_IOCSXCTRL _IO(MGSL_MAGIC_IOC, 21) +#define MGSL_IOCGXCTRL _IO(MGSL_MAGIC_IOC, 22) + + +#endif /* _UAPI_SYNCLINK_H_ */ diff --git a/include/uapi/linux/sysctl.h b/include/uapi/linux/sysctl.h new file mode 100644 index 00000000000..6d6721341f4 --- /dev/null +++ b/include/uapi/linux/sysctl.h @@ -0,0 +1,932 @@ +/* + * sysctl.h: General linux system control interface + * + * Begun 24 March 1995, Stephen Tweedie + * + **************************************************************** + **************************************************************** + ** + ** WARNING: + ** The values in this file are exported to user space via + ** the sysctl() binary interface. Do *NOT* change the + ** numbering of any existing values here, and do not change + ** any numbers within any one set of values. If you have to + ** redefine an existing interface, use a new number for it. + ** The kernel will then return -ENOTDIR to any application using + ** the old binary interface. + ** + **************************************************************** + **************************************************************** + */ + +#ifndef _UAPI_LINUX_SYSCTL_H +#define _UAPI_LINUX_SYSCTL_H + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/compiler.h> + +struct completion; + +#define CTL_MAXNAME 10 /* how many path components do we allow in a + call to sysctl? In other words, what is + the largest acceptable value for the nlen + member of a struct __sysctl_args to have? */ + +struct __sysctl_args { + int __user *name; + int nlen; + void __user *oldval; + size_t __user *oldlenp; + void __user *newval; + size_t newlen; + unsigned long __unused[4]; +}; + +/* Define sysctl names first */ + +/* Top-level names: */ + +enum +{ + CTL_KERN=1, /* General kernel info and control */ + CTL_VM=2, /* VM management */ + CTL_NET=3, /* Networking */ + CTL_PROC=4, /* removal breaks strace(1) compilation */ + CTL_FS=5, /* Filesystems */ + CTL_DEBUG=6, /* Debugging */ + CTL_DEV=7, /* Devices */ + CTL_BUS=8, /* Busses */ + CTL_ABI=9, /* Binary emulation */ + CTL_CPU=10, /* CPU stuff (speed scaling, etc) */ + CTL_ARLAN=254, /* arlan wireless driver */ + CTL_S390DBF=5677, /* s390 debug */ + CTL_SUNRPC=7249, /* sunrpc debug */ + CTL_PM=9899, /* frv power management */ + CTL_FRV=9898, /* frv specific sysctls */ +}; + +/* CTL_BUS names: */ +enum +{ + CTL_BUS_ISA=1 /* ISA */ +}; + +/* /proc/sys/fs/inotify/ */ +enum +{ + INOTIFY_MAX_USER_INSTANCES=1, /* max instances per user */ + INOTIFY_MAX_USER_WATCHES=2, /* max watches per user */ + INOTIFY_MAX_QUEUED_EVENTS=3 /* max queued events per instance */ +}; + +/* CTL_KERN names: */ +enum +{ + KERN_OSTYPE=1, /* string: system version */ + KERN_OSRELEASE=2, /* string: system release */ + KERN_OSREV=3, /* int: system revision */ + KERN_VERSION=4, /* string: compile time info */ + KERN_SECUREMASK=5, /* struct: maximum rights mask */ + KERN_PROF=6, /* table: profiling information */ + KERN_NODENAME=7, /* string: hostname */ + KERN_DOMAINNAME=8, /* string: domainname */ + + KERN_PANIC=15, /* int: panic timeout */ + KERN_REALROOTDEV=16, /* real root device to mount after initrd */ + + KERN_SPARC_REBOOT=21, /* reboot command on Sparc */ + KERN_CTLALTDEL=22, /* int: allow ctl-alt-del to reboot */ + KERN_PRINTK=23, /* struct: control printk logging parameters */ + KERN_NAMETRANS=24, /* Name translation */ + KERN_PPC_HTABRECLAIM=25, /* turn htab reclaimation on/off on PPC */ + KERN_PPC_ZEROPAGED=26, /* turn idle page zeroing on/off on PPC */ + KERN_PPC_POWERSAVE_NAP=27, /* use nap mode for power saving */ + KERN_MODPROBE=28, /* string: modprobe path */ + KERN_SG_BIG_BUFF=29, /* int: sg driver reserved buffer size */ + KERN_ACCT=30, /* BSD process accounting parameters */ + KERN_PPC_L2CR=31, /* l2cr register on PPC */ + + KERN_RTSIGNR=32, /* Number of rt sigs queued */ + KERN_RTSIGMAX=33, /* Max queuable */ + + KERN_SHMMAX=34, /* long: Maximum shared memory segment */ + KERN_MSGMAX=35, /* int: Maximum size of a messege */ + KERN_MSGMNB=36, /* int: Maximum message queue size */ + KERN_MSGPOOL=37, /* int: Maximum system message pool size */ + KERN_SYSRQ=38, /* int: Sysreq enable */ + KERN_MAX_THREADS=39, /* int: Maximum nr of threads in the system */ + KERN_RANDOM=40, /* Random driver */ + KERN_SHMALL=41, /* int: Maximum size of shared memory */ + KERN_MSGMNI=42, /* int: msg queue identifiers */ + KERN_SEM=43, /* struct: sysv semaphore limits */ + KERN_SPARC_STOP_A=44, /* int: Sparc Stop-A enable */ + KERN_SHMMNI=45, /* int: shm array identifiers */ + KERN_OVERFLOWUID=46, /* int: overflow UID */ + KERN_OVERFLOWGID=47, /* int: overflow GID */ + KERN_SHMPATH=48, /* string: path to shm fs */ + KERN_HOTPLUG=49, /* string: path to uevent helper (deprecated) */ + KERN_IEEE_EMULATION_WARNINGS=50, /* int: unimplemented ieee instructions */ + KERN_S390_USER_DEBUG_LOGGING=51, /* int: dumps of user faults */ + KERN_CORE_USES_PID=52, /* int: use core or core.%pid */ + KERN_TAINTED=53, /* int: various kernel tainted flags */ + KERN_CADPID=54, /* int: PID of the process to notify on CAD */ + KERN_PIDMAX=55, /* int: PID # limit */ + KERN_CORE_PATTERN=56, /* string: pattern for core-file names */ + KERN_PANIC_ON_OOPS=57, /* int: whether we will panic on an oops */ + KERN_HPPA_PWRSW=58, /* int: hppa soft-power enable */ + KERN_HPPA_UNALIGNED=59, /* int: hppa unaligned-trap enable */ + KERN_PRINTK_RATELIMIT=60, /* int: tune printk ratelimiting */ + KERN_PRINTK_RATELIMIT_BURST=61, /* int: tune printk ratelimiting */ + KERN_PTY=62, /* dir: pty driver */ + KERN_NGROUPS_MAX=63, /* int: NGROUPS_MAX */ + KERN_SPARC_SCONS_PWROFF=64, /* int: serial console power-off halt */ + KERN_HZ_TIMER=65, /* int: hz timer on or off */ + KERN_UNKNOWN_NMI_PANIC=66, /* int: unknown nmi panic flag */ + KERN_BOOTLOADER_TYPE=67, /* int: boot loader type */ + KERN_RANDOMIZE=68, /* int: randomize virtual address space */ + KERN_SETUID_DUMPABLE=69, /* int: behaviour of dumps for setuid core */ + KERN_SPIN_RETRY=70, /* int: number of spinlock retries */ + KERN_ACPI_VIDEO_FLAGS=71, /* int: flags for setting up video after ACPI sleep */ + KERN_IA64_UNALIGNED=72, /* int: ia64 unaligned userland trap enable */ + KERN_COMPAT_LOG=73, /* int: print compat layer messages */ + KERN_MAX_LOCK_DEPTH=74, /* int: rtmutex's maximum lock depth */ + KERN_NMI_WATCHDOG=75, /* int: enable/disable nmi watchdog */ + KERN_PANIC_ON_NMI=76, /* int: whether we will panic on an unrecovered */ +}; + + + +/* CTL_VM names: */ +enum +{ + VM_UNUSED1=1, /* was: struct: Set vm swapping control */ + VM_UNUSED2=2, /* was; int: Linear or sqrt() swapout for hogs */ + VM_UNUSED3=3, /* was: struct: Set free page thresholds */ + VM_UNUSED4=4, /* Spare */ + VM_OVERCOMMIT_MEMORY=5, /* Turn off the virtual memory safety limit */ + VM_UNUSED5=6, /* was: struct: Set buffer memory thresholds */ + VM_UNUSED7=7, /* was: struct: Set cache memory thresholds */ + VM_UNUSED8=8, /* was: struct: Control kswapd behaviour */ + VM_UNUSED9=9, /* was: struct: Set page table cache parameters */ + VM_PAGE_CLUSTER=10, /* int: set number of pages to swap together */ + VM_DIRTY_BACKGROUND=11, /* dirty_background_ratio */ + VM_DIRTY_RATIO=12, /* dirty_ratio */ + VM_DIRTY_WB_CS=13, /* dirty_writeback_centisecs */ + VM_DIRTY_EXPIRE_CS=14, /* dirty_expire_centisecs */ + VM_NR_PDFLUSH_THREADS=15, /* nr_pdflush_threads */ + VM_OVERCOMMIT_RATIO=16, /* percent of RAM to allow overcommit in */ + VM_PAGEBUF=17, /* struct: Control pagebuf parameters */ + VM_HUGETLB_PAGES=18, /* int: Number of available Huge Pages */ + VM_SWAPPINESS=19, /* Tendency to steal mapped memory */ + VM_LOWMEM_RESERVE_RATIO=20,/* reservation ratio for lower memory zones */ + VM_MIN_FREE_KBYTES=21, /* Minimum free kilobytes to maintain */ + VM_MAX_MAP_COUNT=22, /* int: Maximum number of mmaps/address-space */ + VM_LAPTOP_MODE=23, /* vm laptop mode */ + VM_BLOCK_DUMP=24, /* block dump mode */ + VM_HUGETLB_GROUP=25, /* permitted hugetlb group */ + VM_VFS_CACHE_PRESSURE=26, /* dcache/icache reclaim pressure */ + VM_LEGACY_VA_LAYOUT=27, /* legacy/compatibility virtual address space layout */ + VM_SWAP_TOKEN_TIMEOUT=28, /* default time for token time out */ + VM_DROP_PAGECACHE=29, /* int: nuke lots of pagecache */ + VM_PERCPU_PAGELIST_FRACTION=30,/* int: fraction of pages in each percpu_pagelist */ + VM_ZONE_RECLAIM_MODE=31, /* reclaim local zone memory before going off node */ + VM_MIN_UNMAPPED=32, /* Set min percent of unmapped pages */ + VM_PANIC_ON_OOM=33, /* panic at out-of-memory */ + VM_VDSO_ENABLED=34, /* map VDSO into new processes? */ + VM_MIN_SLAB=35, /* Percent pages ignored by zone reclaim */ +}; + + +/* CTL_NET names: */ +enum +{ + NET_CORE=1, + NET_ETHER=2, + NET_802=3, + NET_UNIX=4, + NET_IPV4=5, + NET_IPX=6, + NET_ATALK=7, + NET_NETROM=8, + NET_AX25=9, + NET_BRIDGE=10, + NET_ROSE=11, + NET_IPV6=12, + NET_X25=13, + NET_TR=14, + NET_DECNET=15, + NET_ECONET=16, + NET_SCTP=17, + NET_LLC=18, + NET_NETFILTER=19, + NET_DCCP=20, + NET_IRDA=412, +}; + +/* /proc/sys/kernel/random */ +enum +{ + RANDOM_POOLSIZE=1, + RANDOM_ENTROPY_COUNT=2, + RANDOM_READ_THRESH=3, + RANDOM_WRITE_THRESH=4, + RANDOM_BOOT_ID=5, + RANDOM_UUID=6 +}; + +/* /proc/sys/kernel/pty */ +enum +{ + PTY_MAX=1, + PTY_NR=2 +}; + +/* /proc/sys/bus/isa */ +enum +{ + BUS_ISA_MEM_BASE=1, + BUS_ISA_PORT_BASE=2, + BUS_ISA_PORT_SHIFT=3 +}; + +/* /proc/sys/net/core */ +enum +{ + NET_CORE_WMEM_MAX=1, + NET_CORE_RMEM_MAX=2, + NET_CORE_WMEM_DEFAULT=3, + NET_CORE_RMEM_DEFAULT=4, +/* was NET_CORE_DESTROY_DELAY */ + NET_CORE_MAX_BACKLOG=6, + NET_CORE_FASTROUTE=7, + NET_CORE_MSG_COST=8, + NET_CORE_MSG_BURST=9, + NET_CORE_OPTMEM_MAX=10, + NET_CORE_HOT_LIST_LENGTH=11, + NET_CORE_DIVERT_VERSION=12, + NET_CORE_NO_CONG_THRESH=13, + NET_CORE_NO_CONG=14, + NET_CORE_LO_CONG=15, + NET_CORE_MOD_CONG=16, + NET_CORE_DEV_WEIGHT=17, + NET_CORE_SOMAXCONN=18, + NET_CORE_BUDGET=19, + NET_CORE_AEVENT_ETIME=20, + NET_CORE_AEVENT_RSEQTH=21, + NET_CORE_WARNINGS=22, +}; + +/* /proc/sys/net/ethernet */ + +/* /proc/sys/net/802 */ + +/* /proc/sys/net/unix */ + +enum +{ + NET_UNIX_DESTROY_DELAY=1, + NET_UNIX_DELETE_DELAY=2, + NET_UNIX_MAX_DGRAM_QLEN=3, +}; + +/* /proc/sys/net/netfilter */ +enum +{ + NET_NF_CONNTRACK_MAX=1, + NET_NF_CONNTRACK_TCP_TIMEOUT_SYN_SENT=2, + NET_NF_CONNTRACK_TCP_TIMEOUT_SYN_RECV=3, + NET_NF_CONNTRACK_TCP_TIMEOUT_ESTABLISHED=4, + NET_NF_CONNTRACK_TCP_TIMEOUT_FIN_WAIT=5, + NET_NF_CONNTRACK_TCP_TIMEOUT_CLOSE_WAIT=6, + NET_NF_CONNTRACK_TCP_TIMEOUT_LAST_ACK=7, + NET_NF_CONNTRACK_TCP_TIMEOUT_TIME_WAIT=8, + NET_NF_CONNTRACK_TCP_TIMEOUT_CLOSE=9, + NET_NF_CONNTRACK_UDP_TIMEOUT=10, + NET_NF_CONNTRACK_UDP_TIMEOUT_STREAM=11, + NET_NF_CONNTRACK_ICMP_TIMEOUT=12, + NET_NF_CONNTRACK_GENERIC_TIMEOUT=13, + NET_NF_CONNTRACK_BUCKETS=14, + NET_NF_CONNTRACK_LOG_INVALID=15, + NET_NF_CONNTRACK_TCP_TIMEOUT_MAX_RETRANS=16, + NET_NF_CONNTRACK_TCP_LOOSE=17, + NET_NF_CONNTRACK_TCP_BE_LIBERAL=18, + NET_NF_CONNTRACK_TCP_MAX_RETRANS=19, + NET_NF_CONNTRACK_SCTP_TIMEOUT_CLOSED=20, + NET_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_WAIT=21, + NET_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_ECHOED=22, + NET_NF_CONNTRACK_SCTP_TIMEOUT_ESTABLISHED=23, + NET_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_SENT=24, + NET_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_RECD=25, + NET_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_ACK_SENT=26, + NET_NF_CONNTRACK_COUNT=27, + NET_NF_CONNTRACK_ICMPV6_TIMEOUT=28, + NET_NF_CONNTRACK_FRAG6_TIMEOUT=29, + NET_NF_CONNTRACK_FRAG6_LOW_THRESH=30, + NET_NF_CONNTRACK_FRAG6_HIGH_THRESH=31, + NET_NF_CONNTRACK_CHECKSUM=32, +}; + +/* /proc/sys/net/ipv4 */ +enum +{ + /* v2.0 compatibile variables */ + NET_IPV4_FORWARD=8, + NET_IPV4_DYNADDR=9, + + NET_IPV4_CONF=16, + NET_IPV4_NEIGH=17, + NET_IPV4_ROUTE=18, + NET_IPV4_FIB_HASH=19, + NET_IPV4_NETFILTER=20, + + NET_IPV4_TCP_TIMESTAMPS=33, + NET_IPV4_TCP_WINDOW_SCALING=34, + NET_IPV4_TCP_SACK=35, + NET_IPV4_TCP_RETRANS_COLLAPSE=36, + NET_IPV4_DEFAULT_TTL=37, + NET_IPV4_AUTOCONFIG=38, + NET_IPV4_NO_PMTU_DISC=39, + NET_IPV4_TCP_SYN_RETRIES=40, + NET_IPV4_IPFRAG_HIGH_THRESH=41, + NET_IPV4_IPFRAG_LOW_THRESH=42, + NET_IPV4_IPFRAG_TIME=43, + NET_IPV4_TCP_MAX_KA_PROBES=44, + NET_IPV4_TCP_KEEPALIVE_TIME=45, + NET_IPV4_TCP_KEEPALIVE_PROBES=46, + NET_IPV4_TCP_RETRIES1=47, + NET_IPV4_TCP_RETRIES2=48, + NET_IPV4_TCP_FIN_TIMEOUT=49, + NET_IPV4_IP_MASQ_DEBUG=50, + NET_TCP_SYNCOOKIES=51, + NET_TCP_STDURG=52, + NET_TCP_RFC1337=53, + NET_TCP_SYN_TAILDROP=54, + NET_TCP_MAX_SYN_BACKLOG=55, + NET_IPV4_LOCAL_PORT_RANGE=56, + NET_IPV4_ICMP_ECHO_IGNORE_ALL=57, + NET_IPV4_ICMP_ECHO_IGNORE_BROADCASTS=58, + NET_IPV4_ICMP_SOURCEQUENCH_RATE=59, + NET_IPV4_ICMP_DESTUNREACH_RATE=60, + NET_IPV4_ICMP_TIMEEXCEED_RATE=61, + NET_IPV4_ICMP_PARAMPROB_RATE=62, + NET_IPV4_ICMP_ECHOREPLY_RATE=63, + NET_IPV4_ICMP_IGNORE_BOGUS_ERROR_RESPONSES=64, + NET_IPV4_IGMP_MAX_MEMBERSHIPS=65, + NET_TCP_TW_RECYCLE=66, + NET_IPV4_ALWAYS_DEFRAG=67, + NET_IPV4_TCP_KEEPALIVE_INTVL=68, + NET_IPV4_INET_PEER_THRESHOLD=69, + NET_IPV4_INET_PEER_MINTTL=70, + NET_IPV4_INET_PEER_MAXTTL=71, + NET_IPV4_INET_PEER_GC_MINTIME=72, + NET_IPV4_INET_PEER_GC_MAXTIME=73, + NET_TCP_ORPHAN_RETRIES=74, + NET_TCP_ABORT_ON_OVERFLOW=75, + NET_TCP_SYNACK_RETRIES=76, + NET_TCP_MAX_ORPHANS=77, + NET_TCP_MAX_TW_BUCKETS=78, + NET_TCP_FACK=79, + NET_TCP_REORDERING=80, + NET_TCP_ECN=81, + NET_TCP_DSACK=82, + NET_TCP_MEM=83, + NET_TCP_WMEM=84, + NET_TCP_RMEM=85, + NET_TCP_APP_WIN=86, + NET_TCP_ADV_WIN_SCALE=87, + NET_IPV4_NONLOCAL_BIND=88, + NET_IPV4_ICMP_RATELIMIT=89, + NET_IPV4_ICMP_RATEMASK=90, + NET_TCP_TW_REUSE=91, + NET_TCP_FRTO=92, + NET_TCP_LOW_LATENCY=93, + NET_IPV4_IPFRAG_SECRET_INTERVAL=94, + NET_IPV4_IGMP_MAX_MSF=96, + NET_TCP_NO_METRICS_SAVE=97, + NET_TCP_DEFAULT_WIN_SCALE=105, + NET_TCP_MODERATE_RCVBUF=106, + NET_TCP_TSO_WIN_DIVISOR=107, + NET_TCP_BIC_BETA=108, + NET_IPV4_ICMP_ERRORS_USE_INBOUND_IFADDR=109, + NET_TCP_CONG_CONTROL=110, + NET_TCP_ABC=111, + NET_IPV4_IPFRAG_MAX_DIST=112, + NET_TCP_MTU_PROBING=113, + NET_TCP_BASE_MSS=114, + NET_IPV4_TCP_WORKAROUND_SIGNED_WINDOWS=115, + NET_TCP_DMA_COPYBREAK=116, + NET_TCP_SLOW_START_AFTER_IDLE=117, + NET_CIPSOV4_CACHE_ENABLE=118, + NET_CIPSOV4_CACHE_BUCKET_SIZE=119, + NET_CIPSOV4_RBM_OPTFMT=120, + NET_CIPSOV4_RBM_STRICTVALID=121, + NET_TCP_AVAIL_CONG_CONTROL=122, + NET_TCP_ALLOWED_CONG_CONTROL=123, + NET_TCP_MAX_SSTHRESH=124, + NET_TCP_FRTO_RESPONSE=125, +}; + +enum { + NET_IPV4_ROUTE_FLUSH=1, + NET_IPV4_ROUTE_MIN_DELAY=2, /* obsolete since 2.6.25 */ + NET_IPV4_ROUTE_MAX_DELAY=3, /* obsolete since 2.6.25 */ + NET_IPV4_ROUTE_GC_THRESH=4, + NET_IPV4_ROUTE_MAX_SIZE=5, + NET_IPV4_ROUTE_GC_MIN_INTERVAL=6, + NET_IPV4_ROUTE_GC_TIMEOUT=7, + NET_IPV4_ROUTE_GC_INTERVAL=8, /* obsolete since 2.6.38 */ + NET_IPV4_ROUTE_REDIRECT_LOAD=9, + NET_IPV4_ROUTE_REDIRECT_NUMBER=10, + NET_IPV4_ROUTE_REDIRECT_SILENCE=11, + NET_IPV4_ROUTE_ERROR_COST=12, + NET_IPV4_ROUTE_ERROR_BURST=13, + NET_IPV4_ROUTE_GC_ELASTICITY=14, + NET_IPV4_ROUTE_MTU_EXPIRES=15, + NET_IPV4_ROUTE_MIN_PMTU=16, + NET_IPV4_ROUTE_MIN_ADVMSS=17, + NET_IPV4_ROUTE_SECRET_INTERVAL=18, + NET_IPV4_ROUTE_GC_MIN_INTERVAL_MS=19, +}; + +enum +{ + NET_PROTO_CONF_ALL=-2, + NET_PROTO_CONF_DEFAULT=-3 + + /* And device ifindices ... */ +}; + +enum +{ + NET_IPV4_CONF_FORWARDING=1, + NET_IPV4_CONF_MC_FORWARDING=2, + NET_IPV4_CONF_PROXY_ARP=3, + NET_IPV4_CONF_ACCEPT_REDIRECTS=4, + NET_IPV4_CONF_SECURE_REDIRECTS=5, + NET_IPV4_CONF_SEND_REDIRECTS=6, + NET_IPV4_CONF_SHARED_MEDIA=7, + NET_IPV4_CONF_RP_FILTER=8, + NET_IPV4_CONF_ACCEPT_SOURCE_ROUTE=9, + NET_IPV4_CONF_BOOTP_RELAY=10, + NET_IPV4_CONF_LOG_MARTIANS=11, + NET_IPV4_CONF_TAG=12, + NET_IPV4_CONF_ARPFILTER=13, + NET_IPV4_CONF_MEDIUM_ID=14, + NET_IPV4_CONF_NOXFRM=15, + NET_IPV4_CONF_NOPOLICY=16, + NET_IPV4_CONF_FORCE_IGMP_VERSION=17, + NET_IPV4_CONF_ARP_ANNOUNCE=18, + NET_IPV4_CONF_ARP_IGNORE=19, + NET_IPV4_CONF_PROMOTE_SECONDARIES=20, + NET_IPV4_CONF_ARP_ACCEPT=21, + NET_IPV4_CONF_ARP_NOTIFY=22, +}; + +/* /proc/sys/net/ipv4/netfilter */ +enum +{ + NET_IPV4_NF_CONNTRACK_MAX=1, + NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_SYN_SENT=2, + NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_SYN_RECV=3, + NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_ESTABLISHED=4, + NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_FIN_WAIT=5, + NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_CLOSE_WAIT=6, + NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_LAST_ACK=7, + NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_TIME_WAIT=8, + NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_CLOSE=9, + NET_IPV4_NF_CONNTRACK_UDP_TIMEOUT=10, + NET_IPV4_NF_CONNTRACK_UDP_TIMEOUT_STREAM=11, + NET_IPV4_NF_CONNTRACK_ICMP_TIMEOUT=12, + NET_IPV4_NF_CONNTRACK_GENERIC_TIMEOUT=13, + NET_IPV4_NF_CONNTRACK_BUCKETS=14, + NET_IPV4_NF_CONNTRACK_LOG_INVALID=15, + NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_MAX_RETRANS=16, + NET_IPV4_NF_CONNTRACK_TCP_LOOSE=17, + NET_IPV4_NF_CONNTRACK_TCP_BE_LIBERAL=18, + NET_IPV4_NF_CONNTRACK_TCP_MAX_RETRANS=19, + NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_CLOSED=20, + NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_WAIT=21, + NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_ECHOED=22, + NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_ESTABLISHED=23, + NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_SENT=24, + NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_RECD=25, + NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_ACK_SENT=26, + NET_IPV4_NF_CONNTRACK_COUNT=27, + NET_IPV4_NF_CONNTRACK_CHECKSUM=28, +}; + +/* /proc/sys/net/ipv6 */ +enum { + NET_IPV6_CONF=16, + NET_IPV6_NEIGH=17, + NET_IPV6_ROUTE=18, + NET_IPV6_ICMP=19, + NET_IPV6_BINDV6ONLY=20, + NET_IPV6_IP6FRAG_HIGH_THRESH=21, + NET_IPV6_IP6FRAG_LOW_THRESH=22, + NET_IPV6_IP6FRAG_TIME=23, + NET_IPV6_IP6FRAG_SECRET_INTERVAL=24, + NET_IPV6_MLD_MAX_MSF=25, +}; + +enum { + NET_IPV6_ROUTE_FLUSH=1, + NET_IPV6_ROUTE_GC_THRESH=2, + NET_IPV6_ROUTE_MAX_SIZE=3, + NET_IPV6_ROUTE_GC_MIN_INTERVAL=4, + NET_IPV6_ROUTE_GC_TIMEOUT=5, + NET_IPV6_ROUTE_GC_INTERVAL=6, + NET_IPV6_ROUTE_GC_ELASTICITY=7, + NET_IPV6_ROUTE_MTU_EXPIRES=8, + NET_IPV6_ROUTE_MIN_ADVMSS=9, + NET_IPV6_ROUTE_GC_MIN_INTERVAL_MS=10 +}; + +enum { + NET_IPV6_FORWARDING=1, + NET_IPV6_HOP_LIMIT=2, + NET_IPV6_MTU=3, + NET_IPV6_ACCEPT_RA=4, + NET_IPV6_ACCEPT_REDIRECTS=5, + NET_IPV6_AUTOCONF=6, + NET_IPV6_DAD_TRANSMITS=7, + NET_IPV6_RTR_SOLICITS=8, + NET_IPV6_RTR_SOLICIT_INTERVAL=9, + NET_IPV6_RTR_SOLICIT_DELAY=10, + NET_IPV6_USE_TEMPADDR=11, + NET_IPV6_TEMP_VALID_LFT=12, + NET_IPV6_TEMP_PREFERED_LFT=13, + NET_IPV6_REGEN_MAX_RETRY=14, + NET_IPV6_MAX_DESYNC_FACTOR=15, + NET_IPV6_MAX_ADDRESSES=16, + NET_IPV6_FORCE_MLD_VERSION=17, + NET_IPV6_ACCEPT_RA_DEFRTR=18, + NET_IPV6_ACCEPT_RA_PINFO=19, + NET_IPV6_ACCEPT_RA_RTR_PREF=20, + NET_IPV6_RTR_PROBE_INTERVAL=21, + NET_IPV6_ACCEPT_RA_RT_INFO_MAX_PLEN=22, + NET_IPV6_PROXY_NDP=23, + NET_IPV6_ACCEPT_SOURCE_ROUTE=25, + __NET_IPV6_MAX +}; + +/* /proc/sys/net/ipv6/icmp */ +enum { + NET_IPV6_ICMP_RATELIMIT=1 +}; + +/* /proc/sys/net/<protocol>/neigh/<dev> */ +enum { + NET_NEIGH_MCAST_SOLICIT=1, + NET_NEIGH_UCAST_SOLICIT=2, + NET_NEIGH_APP_SOLICIT=3, + NET_NEIGH_RETRANS_TIME=4, + NET_NEIGH_REACHABLE_TIME=5, + NET_NEIGH_DELAY_PROBE_TIME=6, + NET_NEIGH_GC_STALE_TIME=7, + NET_NEIGH_UNRES_QLEN=8, + NET_NEIGH_PROXY_QLEN=9, + NET_NEIGH_ANYCAST_DELAY=10, + NET_NEIGH_PROXY_DELAY=11, + NET_NEIGH_LOCKTIME=12, + NET_NEIGH_GC_INTERVAL=13, + NET_NEIGH_GC_THRESH1=14, + NET_NEIGH_GC_THRESH2=15, + NET_NEIGH_GC_THRESH3=16, + NET_NEIGH_RETRANS_TIME_MS=17, + NET_NEIGH_REACHABLE_TIME_MS=18, +}; + +/* /proc/sys/net/dccp */ +enum { + NET_DCCP_DEFAULT=1, +}; + +/* /proc/sys/net/ipx */ +enum { + NET_IPX_PPROP_BROADCASTING=1, + NET_IPX_FORWARDING=2 +}; + +/* /proc/sys/net/llc */ +enum { + NET_LLC2=1, + NET_LLC_STATION=2, +}; + +/* /proc/sys/net/llc/llc2 */ +enum { + NET_LLC2_TIMEOUT=1, +}; + +/* /proc/sys/net/llc/station */ +enum { + NET_LLC_STATION_ACK_TIMEOUT=1, +}; + +/* /proc/sys/net/llc/llc2/timeout */ +enum { + NET_LLC2_ACK_TIMEOUT=1, + NET_LLC2_P_TIMEOUT=2, + NET_LLC2_REJ_TIMEOUT=3, + NET_LLC2_BUSY_TIMEOUT=4, +}; + +/* /proc/sys/net/appletalk */ +enum { + NET_ATALK_AARP_EXPIRY_TIME=1, + NET_ATALK_AARP_TICK_TIME=2, + NET_ATALK_AARP_RETRANSMIT_LIMIT=3, + NET_ATALK_AARP_RESOLVE_TIME=4 +}; + + +/* /proc/sys/net/netrom */ +enum { + NET_NETROM_DEFAULT_PATH_QUALITY=1, + NET_NETROM_OBSOLESCENCE_COUNT_INITIALISER=2, + NET_NETROM_NETWORK_TTL_INITIALISER=3, + NET_NETROM_TRANSPORT_TIMEOUT=4, + NET_NETROM_TRANSPORT_MAXIMUM_TRIES=5, + NET_NETROM_TRANSPORT_ACKNOWLEDGE_DELAY=6, + NET_NETROM_TRANSPORT_BUSY_DELAY=7, + NET_NETROM_TRANSPORT_REQUESTED_WINDOW_SIZE=8, + NET_NETROM_TRANSPORT_NO_ACTIVITY_TIMEOUT=9, + NET_NETROM_ROUTING_CONTROL=10, + NET_NETROM_LINK_FAILS_COUNT=11, + NET_NETROM_RESET=12 +}; + +/* /proc/sys/net/ax25 */ +enum { + NET_AX25_IP_DEFAULT_MODE=1, + NET_AX25_DEFAULT_MODE=2, + NET_AX25_BACKOFF_TYPE=3, + NET_AX25_CONNECT_MODE=4, + NET_AX25_STANDARD_WINDOW=5, + NET_AX25_EXTENDED_WINDOW=6, + NET_AX25_T1_TIMEOUT=7, + NET_AX25_T2_TIMEOUT=8, + NET_AX25_T3_TIMEOUT=9, + NET_AX25_IDLE_TIMEOUT=10, + NET_AX25_N2=11, + NET_AX25_PACLEN=12, + NET_AX25_PROTOCOL=13, + NET_AX25_DAMA_SLAVE_TIMEOUT=14 +}; + +/* /proc/sys/net/rose */ +enum { + NET_ROSE_RESTART_REQUEST_TIMEOUT=1, + NET_ROSE_CALL_REQUEST_TIMEOUT=2, + NET_ROSE_RESET_REQUEST_TIMEOUT=3, + NET_ROSE_CLEAR_REQUEST_TIMEOUT=4, + NET_ROSE_ACK_HOLD_BACK_TIMEOUT=5, + NET_ROSE_ROUTING_CONTROL=6, + NET_ROSE_LINK_FAIL_TIMEOUT=7, + NET_ROSE_MAX_VCS=8, + NET_ROSE_WINDOW_SIZE=9, + NET_ROSE_NO_ACTIVITY_TIMEOUT=10 +}; + +/* /proc/sys/net/x25 */ +enum { + NET_X25_RESTART_REQUEST_TIMEOUT=1, + NET_X25_CALL_REQUEST_TIMEOUT=2, + NET_X25_RESET_REQUEST_TIMEOUT=3, + NET_X25_CLEAR_REQUEST_TIMEOUT=4, + NET_X25_ACK_HOLD_BACK_TIMEOUT=5, + NET_X25_FORWARD=6 +}; + +/* /proc/sys/net/token-ring */ +enum +{ + NET_TR_RIF_TIMEOUT=1 +}; + +/* /proc/sys/net/decnet/ */ +enum { + NET_DECNET_NODE_TYPE = 1, + NET_DECNET_NODE_ADDRESS = 2, + NET_DECNET_NODE_NAME = 3, + NET_DECNET_DEFAULT_DEVICE = 4, + NET_DECNET_TIME_WAIT = 5, + NET_DECNET_DN_COUNT = 6, + NET_DECNET_DI_COUNT = 7, + NET_DECNET_DR_COUNT = 8, + NET_DECNET_DST_GC_INTERVAL = 9, + NET_DECNET_CONF = 10, + NET_DECNET_NO_FC_MAX_CWND = 11, + NET_DECNET_MEM = 12, + NET_DECNET_RMEM = 13, + NET_DECNET_WMEM = 14, + NET_DECNET_DEBUG_LEVEL = 255 +}; + +/* /proc/sys/net/decnet/conf/<dev> */ +enum { + NET_DECNET_CONF_LOOPBACK = -2, + NET_DECNET_CONF_DDCMP = -3, + NET_DECNET_CONF_PPP = -4, + NET_DECNET_CONF_X25 = -5, + NET_DECNET_CONF_GRE = -6, + NET_DECNET_CONF_ETHER = -7 + + /* ... and ifindex of devices */ +}; + +/* /proc/sys/net/decnet/conf/<dev>/ */ +enum { + NET_DECNET_CONF_DEV_PRIORITY = 1, + NET_DECNET_CONF_DEV_T1 = 2, + NET_DECNET_CONF_DEV_T2 = 3, + NET_DECNET_CONF_DEV_T3 = 4, + NET_DECNET_CONF_DEV_FORWARDING = 5, + NET_DECNET_CONF_DEV_BLKSIZE = 6, + NET_DECNET_CONF_DEV_STATE = 7 +}; + +/* /proc/sys/net/sctp */ +enum { + NET_SCTP_RTO_INITIAL = 1, + NET_SCTP_RTO_MIN = 2, + NET_SCTP_RTO_MAX = 3, + NET_SCTP_RTO_ALPHA = 4, + NET_SCTP_RTO_BETA = 5, + NET_SCTP_VALID_COOKIE_LIFE = 6, + NET_SCTP_ASSOCIATION_MAX_RETRANS = 7, + NET_SCTP_PATH_MAX_RETRANS = 8, + NET_SCTP_MAX_INIT_RETRANSMITS = 9, + NET_SCTP_HB_INTERVAL = 10, + NET_SCTP_PRESERVE_ENABLE = 11, + NET_SCTP_MAX_BURST = 12, + NET_SCTP_ADDIP_ENABLE = 13, + NET_SCTP_PRSCTP_ENABLE = 14, + NET_SCTP_SNDBUF_POLICY = 15, + NET_SCTP_SACK_TIMEOUT = 16, + NET_SCTP_RCVBUF_POLICY = 17, +}; + +/* /proc/sys/net/bridge */ +enum { + NET_BRIDGE_NF_CALL_ARPTABLES = 1, + NET_BRIDGE_NF_CALL_IPTABLES = 2, + NET_BRIDGE_NF_CALL_IP6TABLES = 3, + NET_BRIDGE_NF_FILTER_VLAN_TAGGED = 4, + NET_BRIDGE_NF_FILTER_PPPOE_TAGGED = 5, +}; + +/* proc/sys/net/irda */ +enum { + NET_IRDA_DISCOVERY=1, + NET_IRDA_DEVNAME=2, + NET_IRDA_DEBUG=3, + NET_IRDA_FAST_POLL=4, + NET_IRDA_DISCOVERY_SLOTS=5, + NET_IRDA_DISCOVERY_TIMEOUT=6, + NET_IRDA_SLOT_TIMEOUT=7, + NET_IRDA_MAX_BAUD_RATE=8, + NET_IRDA_MIN_TX_TURN_TIME=9, + NET_IRDA_MAX_TX_DATA_SIZE=10, + NET_IRDA_MAX_TX_WINDOW=11, + NET_IRDA_MAX_NOREPLY_TIME=12, + NET_IRDA_WARN_NOREPLY_TIME=13, + NET_IRDA_LAP_KEEPALIVE_TIME=14, +}; + + +/* CTL_FS names: */ +enum +{ + FS_NRINODE=1, /* int:current number of allocated inodes */ + FS_STATINODE=2, + FS_MAXINODE=3, /* int:maximum number of inodes that can be allocated */ + FS_NRDQUOT=4, /* int:current number of allocated dquots */ + FS_MAXDQUOT=5, /* int:maximum number of dquots that can be allocated */ + FS_NRFILE=6, /* int:current number of allocated filedescriptors */ + FS_MAXFILE=7, /* int:maximum number of filedescriptors that can be allocated */ + FS_DENTRY=8, + FS_NRSUPER=9, /* int:current number of allocated super_blocks */ + FS_MAXSUPER=10, /* int:maximum number of super_blocks that can be allocated */ + FS_OVERFLOWUID=11, /* int: overflow UID */ + FS_OVERFLOWGID=12, /* int: overflow GID */ + FS_LEASES=13, /* int: leases enabled */ + FS_DIR_NOTIFY=14, /* int: directory notification enabled */ + FS_LEASE_TIME=15, /* int: maximum time to wait for a lease break */ + FS_DQSTATS=16, /* disc quota usage statistics and control */ + FS_XFS=17, /* struct: control xfs parameters */ + FS_AIO_NR=18, /* current system-wide number of aio requests */ + FS_AIO_MAX_NR=19, /* system-wide maximum number of aio requests */ + FS_INOTIFY=20, /* inotify submenu */ + FS_OCFS2=988, /* ocfs2 */ +}; + +/* /proc/sys/fs/quota/ */ +enum { + FS_DQ_LOOKUPS = 1, + FS_DQ_DROPS = 2, + FS_DQ_READS = 3, + FS_DQ_WRITES = 4, + FS_DQ_CACHE_HITS = 5, + FS_DQ_ALLOCATED = 6, + FS_DQ_FREE = 7, + FS_DQ_SYNCS = 8, + FS_DQ_WARNINGS = 9, +}; + +/* CTL_DEBUG names: */ + +/* CTL_DEV names: */ +enum { + DEV_CDROM=1, + DEV_HWMON=2, + DEV_PARPORT=3, + DEV_RAID=4, + DEV_MAC_HID=5, + DEV_SCSI=6, + DEV_IPMI=7, +}; + +/* /proc/sys/dev/cdrom */ +enum { + DEV_CDROM_INFO=1, + DEV_CDROM_AUTOCLOSE=2, + DEV_CDROM_AUTOEJECT=3, + DEV_CDROM_DEBUG=4, + DEV_CDROM_LOCK=5, + DEV_CDROM_CHECK_MEDIA=6 +}; + +/* /proc/sys/dev/parport */ +enum { + DEV_PARPORT_DEFAULT=-3 +}; + +/* /proc/sys/dev/raid */ +enum { + DEV_RAID_SPEED_LIMIT_MIN=1, + DEV_RAID_SPEED_LIMIT_MAX=2 +}; + +/* /proc/sys/dev/parport/default */ +enum { + DEV_PARPORT_DEFAULT_TIMESLICE=1, + DEV_PARPORT_DEFAULT_SPINTIME=2 +}; + +/* /proc/sys/dev/parport/parport n */ +enum { + DEV_PARPORT_SPINTIME=1, + DEV_PARPORT_BASE_ADDR=2, + DEV_PARPORT_IRQ=3, + DEV_PARPORT_DMA=4, + DEV_PARPORT_MODES=5, + DEV_PARPORT_DEVICES=6, + DEV_PARPORT_AUTOPROBE=16 +}; + +/* /proc/sys/dev/parport/parport n/devices/ */ +enum { + DEV_PARPORT_DEVICES_ACTIVE=-3, +}; + +/* /proc/sys/dev/parport/parport n/devices/device n */ +enum { + DEV_PARPORT_DEVICE_TIMESLICE=1, +}; + +/* /proc/sys/dev/mac_hid */ +enum { + DEV_MAC_HID_KEYBOARD_SENDS_LINUX_KEYCODES=1, + DEV_MAC_HID_KEYBOARD_LOCK_KEYCODES=2, + DEV_MAC_HID_MOUSE_BUTTON_EMULATION=3, + DEV_MAC_HID_MOUSE_BUTTON2_KEYCODE=4, + DEV_MAC_HID_MOUSE_BUTTON3_KEYCODE=5, + DEV_MAC_HID_ADB_MOUSE_SENDS_KEYCODES=6 +}; + +/* /proc/sys/dev/scsi */ +enum { + DEV_SCSI_LOGGING_LEVEL=1, +}; + +/* /proc/sys/dev/ipmi */ +enum { + DEV_IPMI_POWEROFF_POWERCYCLE=1, +}; + +/* /proc/sys/abi */ +enum +{ + ABI_DEFHANDLER_COFF=1, /* default handler for coff binaries */ + ABI_DEFHANDLER_ELF=2, /* default handler for ELF binaries */ + ABI_DEFHANDLER_LCALL7=3,/* default handler for procs using lcall7 */ + ABI_DEFHANDLER_LIBCSO=4,/* default handler for an libc.so ELF interp */ + ABI_TRACE=5, /* tracing flags */ + ABI_FAKE_UTSNAME=6, /* fake target utsname information */ +}; + + +#endif /* _UAPI_LINUX_SYSCTL_H */ diff --git a/include/linux/sysinfo.h b/include/uapi/linux/sysinfo.h index 934335a2252..934335a2252 100644 --- a/include/linux/sysinfo.h +++ b/include/uapi/linux/sysinfo.h diff --git a/include/linux/taskstats.h b/include/uapi/linux/taskstats.h index 2466e550a41..2466e550a41 100644 --- a/include/linux/taskstats.h +++ b/include/uapi/linux/taskstats.h diff --git a/include/uapi/linux/tcp.h b/include/uapi/linux/tcp.h new file mode 100644 index 00000000000..c4b89a5cb7d --- /dev/null +++ b/include/uapi/linux/tcp.h @@ -0,0 +1,225 @@ +/* + * INET An implementation of the TCP/IP protocol suite for the LINUX + * operating system. INET is implemented using the BSD Socket + * interface as the means of communication with the user level. + * + * Definitions for the TCP protocol. + * + * Version: @(#)tcp.h 1.0.2 04/28/93 + * + * Author: Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _UAPI_LINUX_TCP_H +#define _UAPI_LINUX_TCP_H + +#include <linux/types.h> +#include <asm/byteorder.h> +#include <linux/socket.h> + +struct tcphdr { + __be16 source; + __be16 dest; + __be32 seq; + __be32 ack_seq; +#if defined(__LITTLE_ENDIAN_BITFIELD) + __u16 res1:4, + doff:4, + fin:1, + syn:1, + rst:1, + psh:1, + ack:1, + urg:1, + ece:1, + cwr:1; +#elif defined(__BIG_ENDIAN_BITFIELD) + __u16 doff:4, + res1:4, + cwr:1, + ece:1, + urg:1, + ack:1, + psh:1, + rst:1, + syn:1, + fin:1; +#else +#error "Adjust your <asm/byteorder.h> defines" +#endif + __be16 window; + __sum16 check; + __be16 urg_ptr; +}; + +/* + * The union cast uses a gcc extension to avoid aliasing problems + * (union is compatible to any of its members) + * This means this part of the code is -fstrict-aliasing safe now. + */ +union tcp_word_hdr { + struct tcphdr hdr; + __be32 words[5]; +}; + +#define tcp_flag_word(tp) ( ((union tcp_word_hdr *)(tp))->words [3]) + +enum { + TCP_FLAG_CWR = __constant_cpu_to_be32(0x00800000), + TCP_FLAG_ECE = __constant_cpu_to_be32(0x00400000), + TCP_FLAG_URG = __constant_cpu_to_be32(0x00200000), + TCP_FLAG_ACK = __constant_cpu_to_be32(0x00100000), + TCP_FLAG_PSH = __constant_cpu_to_be32(0x00080000), + TCP_FLAG_RST = __constant_cpu_to_be32(0x00040000), + TCP_FLAG_SYN = __constant_cpu_to_be32(0x00020000), + TCP_FLAG_FIN = __constant_cpu_to_be32(0x00010000), + TCP_RESERVED_BITS = __constant_cpu_to_be32(0x0F000000), + TCP_DATA_OFFSET = __constant_cpu_to_be32(0xF0000000) +}; + +/* + * TCP general constants + */ +#define TCP_MSS_DEFAULT 536U /* IPv4 (RFC1122, RFC2581) */ +#define TCP_MSS_DESIRED 1220U /* IPv6 (tunneled), EDNS0 (RFC3226) */ + +/* TCP socket options */ +#define TCP_NODELAY 1 /* Turn off Nagle's algorithm. */ +#define TCP_MAXSEG 2 /* Limit MSS */ +#define TCP_CORK 3 /* Never send partially complete segments */ +#define TCP_KEEPIDLE 4 /* Start keeplives after this period */ +#define TCP_KEEPINTVL 5 /* Interval between keepalives */ +#define TCP_KEEPCNT 6 /* Number of keepalives before death */ +#define TCP_SYNCNT 7 /* Number of SYN retransmits */ +#define TCP_LINGER2 8 /* Life time of orphaned FIN-WAIT-2 state */ +#define TCP_DEFER_ACCEPT 9 /* Wake up listener only when data arrive */ +#define TCP_WINDOW_CLAMP 10 /* Bound advertised window */ +#define TCP_INFO 11 /* Information about this connection. */ +#define TCP_QUICKACK 12 /* Block/reenable quick acks */ +#define TCP_CONGESTION 13 /* Congestion control algorithm */ +#define TCP_MD5SIG 14 /* TCP MD5 Signature (RFC2385) */ +#define TCP_COOKIE_TRANSACTIONS 15 /* TCP Cookie Transactions */ +#define TCP_THIN_LINEAR_TIMEOUTS 16 /* Use linear timeouts for thin streams*/ +#define TCP_THIN_DUPACK 17 /* Fast retrans. after 1 dupack */ +#define TCP_USER_TIMEOUT 18 /* How long for loss retry before timeout */ +#define TCP_REPAIR 19 /* TCP sock is under repair right now */ +#define TCP_REPAIR_QUEUE 20 +#define TCP_QUEUE_SEQ 21 +#define TCP_REPAIR_OPTIONS 22 +#define TCP_FASTOPEN 23 /* Enable FastOpen on listeners */ + +struct tcp_repair_opt { + __u32 opt_code; + __u32 opt_val; +}; + +enum { + TCP_NO_QUEUE, + TCP_RECV_QUEUE, + TCP_SEND_QUEUE, + TCP_QUEUES_NR, +}; + +/* for TCP_INFO socket option */ +#define TCPI_OPT_TIMESTAMPS 1 +#define TCPI_OPT_SACK 2 +#define TCPI_OPT_WSCALE 4 +#define TCPI_OPT_ECN 8 /* ECN was negociated at TCP session init */ +#define TCPI_OPT_ECN_SEEN 16 /* we received at least one packet with ECT */ + +enum tcp_ca_state { + TCP_CA_Open = 0, +#define TCPF_CA_Open (1<<TCP_CA_Open) + TCP_CA_Disorder = 1, +#define TCPF_CA_Disorder (1<<TCP_CA_Disorder) + TCP_CA_CWR = 2, +#define TCPF_CA_CWR (1<<TCP_CA_CWR) + TCP_CA_Recovery = 3, +#define TCPF_CA_Recovery (1<<TCP_CA_Recovery) + TCP_CA_Loss = 4 +#define TCPF_CA_Loss (1<<TCP_CA_Loss) +}; + +struct tcp_info { + __u8 tcpi_state; + __u8 tcpi_ca_state; + __u8 tcpi_retransmits; + __u8 tcpi_probes; + __u8 tcpi_backoff; + __u8 tcpi_options; + __u8 tcpi_snd_wscale : 4, tcpi_rcv_wscale : 4; + + __u32 tcpi_rto; + __u32 tcpi_ato; + __u32 tcpi_snd_mss; + __u32 tcpi_rcv_mss; + + __u32 tcpi_unacked; + __u32 tcpi_sacked; + __u32 tcpi_lost; + __u32 tcpi_retrans; + __u32 tcpi_fackets; + + /* Times. */ + __u32 tcpi_last_data_sent; + __u32 tcpi_last_ack_sent; /* Not remembered, sorry. */ + __u32 tcpi_last_data_recv; + __u32 tcpi_last_ack_recv; + + /* Metrics. */ + __u32 tcpi_pmtu; + __u32 tcpi_rcv_ssthresh; + __u32 tcpi_rtt; + __u32 tcpi_rttvar; + __u32 tcpi_snd_ssthresh; + __u32 tcpi_snd_cwnd; + __u32 tcpi_advmss; + __u32 tcpi_reordering; + + __u32 tcpi_rcv_rtt; + __u32 tcpi_rcv_space; + + __u32 tcpi_total_retrans; +}; + +/* for TCP_MD5SIG socket option */ +#define TCP_MD5SIG_MAXKEYLEN 80 + +struct tcp_md5sig { + struct __kernel_sockaddr_storage tcpm_addr; /* address associated */ + __u16 __tcpm_pad1; /* zero */ + __u16 tcpm_keylen; /* key length */ + __u32 __tcpm_pad2; /* zero */ + __u8 tcpm_key[TCP_MD5SIG_MAXKEYLEN]; /* key (binary) */ +}; + +/* for TCP_COOKIE_TRANSACTIONS (TCPCT) socket option */ +#define TCP_COOKIE_MIN 8 /* 64-bits */ +#define TCP_COOKIE_MAX 16 /* 128-bits */ +#define TCP_COOKIE_PAIR_SIZE (2*TCP_COOKIE_MAX) + +/* Flags for both getsockopt and setsockopt */ +#define TCP_COOKIE_IN_ALWAYS (1 << 0) /* Discard SYN without cookie */ +#define TCP_COOKIE_OUT_NEVER (1 << 1) /* Prohibit outgoing cookies, + * supercedes everything. */ + +/* Flags for getsockopt */ +#define TCP_S_DATA_IN (1 << 2) /* Was data received? */ +#define TCP_S_DATA_OUT (1 << 3) /* Was data sent? */ + +/* TCP_COOKIE_TRANSACTIONS data */ +struct tcp_cookie_transactions { + __u16 tcpct_flags; /* see above */ + __u8 __tcpct_pad1; /* zero */ + __u8 tcpct_cookie_desired; /* bytes */ + __u16 tcpct_s_data_desired; /* bytes of variable data */ + __u16 tcpct_used; /* bytes in value */ + __u8 tcpct_value[TCP_MSS_DEFAULT]; +}; + + +#endif /* _UAPI_LINUX_TCP_H */ diff --git a/include/linux/tcp_metrics.h b/include/uapi/linux/tcp_metrics.h index cb5157b55f3..cb5157b55f3 100644 --- a/include/linux/tcp_metrics.h +++ b/include/uapi/linux/tcp_metrics.h diff --git a/include/linux/telephony.h b/include/uapi/linux/telephony.h index f63afe330ad..f63afe330ad 100644 --- a/include/linux/telephony.h +++ b/include/uapi/linux/telephony.h diff --git a/include/linux/termios.h b/include/uapi/linux/termios.h index 2acd0c1f8a2..2acd0c1f8a2 100644 --- a/include/linux/termios.h +++ b/include/uapi/linux/termios.h diff --git a/include/uapi/linux/time.h b/include/uapi/linux/time.h new file mode 100644 index 00000000000..0d3c0edc3ed --- /dev/null +++ b/include/uapi/linux/time.h @@ -0,0 +1,71 @@ +#ifndef _UAPI_LINUX_TIME_H +#define _UAPI_LINUX_TIME_H + +#include <linux/types.h> + + +#ifndef _STRUCT_TIMESPEC +#define _STRUCT_TIMESPEC +struct timespec { + __kernel_time_t tv_sec; /* seconds */ + long tv_nsec; /* nanoseconds */ +}; +#endif + +struct timeval { + __kernel_time_t tv_sec; /* seconds */ + __kernel_suseconds_t tv_usec; /* microseconds */ +}; + +struct timezone { + int tz_minuteswest; /* minutes west of Greenwich */ + int tz_dsttime; /* type of dst correction */ +}; + + +/* + * Names of the interval timers, and structure + * defining a timer setting: + */ +#define ITIMER_REAL 0 +#define ITIMER_VIRTUAL 1 +#define ITIMER_PROF 2 + +struct itimerspec { + struct timespec it_interval; /* timer period */ + struct timespec it_value; /* timer expiration */ +}; + +struct itimerval { + struct timeval it_interval; /* timer interval */ + struct timeval it_value; /* current value */ +}; + +/* + * The IDs of the various system clocks (for POSIX.1b interval timers): + */ +#define CLOCK_REALTIME 0 +#define CLOCK_MONOTONIC 1 +#define CLOCK_PROCESS_CPUTIME_ID 2 +#define CLOCK_THREAD_CPUTIME_ID 3 +#define CLOCK_MONOTONIC_RAW 4 +#define CLOCK_REALTIME_COARSE 5 +#define CLOCK_MONOTONIC_COARSE 6 +#define CLOCK_BOOTTIME 7 +#define CLOCK_REALTIME_ALARM 8 +#define CLOCK_BOOTTIME_ALARM 9 + +/* + * The IDs of various hardware clocks: + */ +#define CLOCK_SGI_CYCLE 10 +#define MAX_CLOCKS 16 +#define CLOCKS_MASK (CLOCK_REALTIME | CLOCK_MONOTONIC) +#define CLOCKS_MONO CLOCK_MONOTONIC + +/* + * The various flags for setting POSIX.1b interval timers: + */ +#define TIMER_ABSTIME 0x01 + +#endif /* _UAPI_LINUX_TIME_H */ diff --git a/include/linux/times.h b/include/uapi/linux/times.h index 87b62615ced..87b62615ced 100644 --- a/include/linux/times.h +++ b/include/uapi/linux/times.h diff --git a/include/uapi/linux/timex.h b/include/uapi/linux/timex.h new file mode 100644 index 00000000000..a7ea81f1371 --- /dev/null +++ b/include/uapi/linux/timex.h @@ -0,0 +1,166 @@ +/***************************************************************************** + * * + * Copyright (c) David L. Mills 1993 * + * * + * Permission to use, copy, modify, and distribute this software and its * + * documentation for any purpose and without fee is hereby granted, provided * + * that the above copyright notice appears in all copies and that both the * + * copyright notice and this permission notice appear in supporting * + * documentation, and that the name University of Delaware not be used in * + * advertising or publicity pertaining to distribution of the software * + * without specific, written prior permission. The University of Delaware * + * makes no representations about the suitability this software for any * + * purpose. It is provided "as is" without express or implied warranty. * + * * + *****************************************************************************/ + +/* + * Modification history timex.h + * + * 29 Dec 97 Russell King + * Moved CLOCK_TICK_RATE, CLOCK_TICK_FACTOR and FINETUNE to asm/timex.h + * for ARM machines + * + * 9 Jan 97 Adrian Sun + * Shifted LATCH define to allow access to alpha machines. + * + * 26 Sep 94 David L. Mills + * Added defines for hybrid phase/frequency-lock loop. + * + * 19 Mar 94 David L. Mills + * Moved defines from kernel routines to header file and added new + * defines for PPS phase-lock loop. + * + * 20 Feb 94 David L. Mills + * Revised status codes and structures for external clock and PPS + * signal discipline. + * + * 28 Nov 93 David L. Mills + * Adjusted parameters to improve stability and increase poll + * interval. + * + * 17 Sep 93 David L. Mills + * Created file $NTP/include/sys/timex.h + * 07 Oct 93 Torsten Duwe + * Derived linux/timex.h + * 1995-08-13 Torsten Duwe + * kernel PLL updated to 1994-12-13 specs (rfc-1589) + * 1997-08-30 Ulrich Windl + * Added new constant NTP_PHASE_LIMIT + * 2004-08-12 Christoph Lameter + * Reworked time interpolation logic + */ +#ifndef _UAPI_LINUX_TIMEX_H +#define _UAPI_LINUX_TIMEX_H + +#include <linux/time.h> + +#define NTP_API 4 /* NTP API version */ + +/* + * syscall interface - used (mainly by NTP daemon) + * to discipline kernel clock oscillator + */ +struct timex { + unsigned int modes; /* mode selector */ + long offset; /* time offset (usec) */ + long freq; /* frequency offset (scaled ppm) */ + long maxerror; /* maximum error (usec) */ + long esterror; /* estimated error (usec) */ + int status; /* clock command/status */ + long constant; /* pll time constant */ + long precision; /* clock precision (usec) (read only) */ + long tolerance; /* clock frequency tolerance (ppm) + * (read only) + */ + struct timeval time; /* (read only, except for ADJ_SETOFFSET) */ + long tick; /* (modified) usecs between clock ticks */ + + long ppsfreq; /* pps frequency (scaled ppm) (ro) */ + long jitter; /* pps jitter (us) (ro) */ + int shift; /* interval duration (s) (shift) (ro) */ + long stabil; /* pps stability (scaled ppm) (ro) */ + long jitcnt; /* jitter limit exceeded (ro) */ + long calcnt; /* calibration intervals (ro) */ + long errcnt; /* calibration errors (ro) */ + long stbcnt; /* stability limit exceeded (ro) */ + + int tai; /* TAI offset (ro) */ + + int :32; int :32; int :32; int :32; + int :32; int :32; int :32; int :32; + int :32; int :32; int :32; +}; + +/* + * Mode codes (timex.mode) + */ +#define ADJ_OFFSET 0x0001 /* time offset */ +#define ADJ_FREQUENCY 0x0002 /* frequency offset */ +#define ADJ_MAXERROR 0x0004 /* maximum time error */ +#define ADJ_ESTERROR 0x0008 /* estimated time error */ +#define ADJ_STATUS 0x0010 /* clock status */ +#define ADJ_TIMECONST 0x0020 /* pll time constant */ +#define ADJ_TAI 0x0080 /* set TAI offset */ +#define ADJ_SETOFFSET 0x0100 /* add 'time' to current time */ +#define ADJ_MICRO 0x1000 /* select microsecond resolution */ +#define ADJ_NANO 0x2000 /* select nanosecond resolution */ +#define ADJ_TICK 0x4000 /* tick value */ + +#ifndef __KERNEL__ +#define ADJ_OFFSET_SINGLESHOT 0x8001 /* old-fashioned adjtime */ +#define ADJ_OFFSET_SS_READ 0xa001 /* read-only adjtime */ +#endif + +/* NTP userland likes the MOD_ prefix better */ +#define MOD_OFFSET ADJ_OFFSET +#define MOD_FREQUENCY ADJ_FREQUENCY +#define MOD_MAXERROR ADJ_MAXERROR +#define MOD_ESTERROR ADJ_ESTERROR +#define MOD_STATUS ADJ_STATUS +#define MOD_TIMECONST ADJ_TIMECONST +#define MOD_TAI ADJ_TAI +#define MOD_MICRO ADJ_MICRO +#define MOD_NANO ADJ_NANO + + +/* + * Status codes (timex.status) + */ +#define STA_PLL 0x0001 /* enable PLL updates (rw) */ +#define STA_PPSFREQ 0x0002 /* enable PPS freq discipline (rw) */ +#define STA_PPSTIME 0x0004 /* enable PPS time discipline (rw) */ +#define STA_FLL 0x0008 /* select frequency-lock mode (rw) */ + +#define STA_INS 0x0010 /* insert leap (rw) */ +#define STA_DEL 0x0020 /* delete leap (rw) */ +#define STA_UNSYNC 0x0040 /* clock unsynchronized (rw) */ +#define STA_FREQHOLD 0x0080 /* hold frequency (rw) */ + +#define STA_PPSSIGNAL 0x0100 /* PPS signal present (ro) */ +#define STA_PPSJITTER 0x0200 /* PPS signal jitter exceeded (ro) */ +#define STA_PPSWANDER 0x0400 /* PPS signal wander exceeded (ro) */ +#define STA_PPSERROR 0x0800 /* PPS signal calibration error (ro) */ + +#define STA_CLOCKERR 0x1000 /* clock hardware fault (ro) */ +#define STA_NANO 0x2000 /* resolution (0 = us, 1 = ns) (ro) */ +#define STA_MODE 0x4000 /* mode (0 = PLL, 1 = FLL) (ro) */ +#define STA_CLK 0x8000 /* clock source (0 = A, 1 = B) (ro) */ + +/* read-only bits */ +#define STA_RONLY (STA_PPSSIGNAL | STA_PPSJITTER | STA_PPSWANDER | \ + STA_PPSERROR | STA_CLOCKERR | STA_NANO | STA_MODE | STA_CLK) + +/* + * Clock states (time_state) + */ +#define TIME_OK 0 /* clock synchronized, no leap second */ +#define TIME_INS 1 /* insert leap second */ +#define TIME_DEL 2 /* delete leap second */ +#define TIME_OOP 3 /* leap second in progress */ +#define TIME_WAIT 4 /* leap second has occurred */ +#define TIME_ERROR 5 /* clock not synchronized */ +#define TIME_BAD TIME_ERROR /* bw compat */ + + +#endif /* _UAPI_LINUX_TIMEX_H */ diff --git a/include/linux/tiocl.h b/include/uapi/linux/tiocl.h index 4756862c4ed..4756862c4ed 100644 --- a/include/linux/tiocl.h +++ b/include/uapi/linux/tiocl.h diff --git a/include/linux/tipc.h b/include/uapi/linux/tipc.h index f2d90091cc2..f2d90091cc2 100644 --- a/include/linux/tipc.h +++ b/include/uapi/linux/tipc.h diff --git a/include/linux/tipc_config.h b/include/uapi/linux/tipc_config.h index 0b1e3f218a3..0b1e3f218a3 100644 --- a/include/linux/tipc_config.h +++ b/include/uapi/linux/tipc_config.h diff --git a/include/uapi/linux/toshiba.h b/include/uapi/linux/toshiba.h new file mode 100644 index 00000000000..e9bef5b2f91 --- /dev/null +++ b/include/uapi/linux/toshiba.h @@ -0,0 +1,37 @@ +/* toshiba.h -- Linux driver for accessing the SMM on Toshiba laptops + * + * Copyright (c) 1996-2000 Jonathan A. Buzzard (jonathan@buzzard.org.uk) + * + * Thanks to Juergen Heinzl <juergen@monocerus.demon.co.uk> for the pointers + * on making sure the structure is aligned and packed. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + */ + +#ifndef _UAPI_LINUX_TOSHIBA_H +#define _UAPI_LINUX_TOSHIBA_H + +#define TOSH_PROC "/proc/toshiba" +#define TOSH_DEVICE "/dev/toshiba" +#define TOSH_SMM _IOWR('t', 0x90, int) /* broken: meant 24 bytes */ + +typedef struct { + unsigned int eax; + unsigned int ebx __attribute__ ((packed)); + unsigned int ecx __attribute__ ((packed)); + unsigned int edx __attribute__ ((packed)); + unsigned int esi __attribute__ ((packed)); + unsigned int edi __attribute__ ((packed)); +} SMMRegisters; + + +#endif /* _UAPI_LINUX_TOSHIBA_H */ diff --git a/include/uapi/linux/tty.h b/include/uapi/linux/tty.h new file mode 100644 index 00000000000..dac199a2dba --- /dev/null +++ b/include/uapi/linux/tty.h @@ -0,0 +1,38 @@ +#ifndef _UAPI_LINUX_TTY_H +#define _UAPI_LINUX_TTY_H + +/* + * 'tty.h' defines some structures used by tty_io.c and some defines. + */ + +#define NR_LDISCS 30 + +/* line disciplines */ +#define N_TTY 0 +#define N_SLIP 1 +#define N_MOUSE 2 +#define N_PPP 3 +#define N_STRIP 4 +#define N_AX25 5 +#define N_X25 6 /* X.25 async */ +#define N_6PACK 7 +#define N_MASC 8 /* Reserved for Mobitex module <kaz@cafe.net> */ +#define N_R3964 9 /* Reserved for Simatic R3964 module */ +#define N_PROFIBUS_FDL 10 /* Reserved for Profibus */ +#define N_IRDA 11 /* Linux IrDa - http://irda.sourceforge.net/ */ +#define N_SMSBLOCK 12 /* SMS block mode - for talking to GSM data */ + /* cards about SMS messages */ +#define N_HDLC 13 /* synchronous HDLC */ +#define N_SYNC_PPP 14 /* synchronous PPP */ +#define N_HCI 15 /* Bluetooth HCI UART */ +#define N_GIGASET_M101 16 /* Siemens Gigaset M101 serial DECT adapter */ +#define N_SLCAN 17 /* Serial / USB serial CAN Adaptors */ +#define N_PPS 18 /* Pulse per Second */ +#define N_V253 19 /* Codec control over voice modem */ +#define N_CAIF 20 /* CAIF protocol for talking to modems */ +#define N_GSM0710 21 /* GSM 0710 Mux */ +#define N_TI_WL 22 /* for TI's WL BT, FM, GPS combo chips */ +#define N_TRACESINK 23 /* Trace data routing for MIPI P1149.7 */ +#define N_TRACEROUTER 24 /* Trace data routing for MIPI P1149.7 */ + +#endif /* _UAPI_LINUX_TTY_H */ diff --git a/include/linux/tty_flags.h b/include/uapi/linux/tty_flags.h index eefcb483a2c..eefcb483a2c 100644 --- a/include/linux/tty_flags.h +++ b/include/uapi/linux/tty_flags.h diff --git a/include/uapi/linux/types.h b/include/uapi/linux/types.h new file mode 100644 index 00000000000..acf0979b790 --- /dev/null +++ b/include/uapi/linux/types.h @@ -0,0 +1,56 @@ +#ifndef _UAPI_LINUX_TYPES_H +#define _UAPI_LINUX_TYPES_H + +#include <asm/types.h> + +#ifndef __ASSEMBLY__ +#ifndef __KERNEL__ +#ifndef __EXPORTED_HEADERS__ +#warning "Attempt to use kernel headers from user space, see http://kernelnewbies.org/KernelHeaders" +#endif /* __EXPORTED_HEADERS__ */ +#endif + +#include <linux/posix_types.h> + + +/* + * Below are truly Linux-specific types that should never collide with + * any application/library that wants linux/types.h. + */ + +#ifdef __CHECKER__ +#define __bitwise__ __attribute__((bitwise)) +#else +#define __bitwise__ +#endif +#ifdef __CHECK_ENDIAN__ +#define __bitwise __bitwise__ +#else +#define __bitwise +#endif + +typedef __u16 __bitwise __le16; +typedef __u16 __bitwise __be16; +typedef __u32 __bitwise __le32; +typedef __u32 __bitwise __be32; +typedef __u64 __bitwise __le64; +typedef __u64 __bitwise __be64; + +typedef __u16 __bitwise __sum16; +typedef __u32 __bitwise __wsum; + +/* + * aligned_u64 should be used in defining kernel<->userspace ABIs to avoid + * common 32/64-bit compat problems. + * 64-bit values align to 4-byte boundaries on x86_32 (and possibly other + * architectures) and to 8-byte boundaries on 64-bit architectures. The new + * aligned_64 type enforces 8-byte alignment so that structs containing + * aligned_64 values have the same alignment on 32-bit and 64-bit architectures. + * No conversions are necessary between 32-bit user-space and a 64-bit kernel. + */ +#define __aligned_u64 __u64 __attribute__((aligned(8))) +#define __aligned_be64 __be64 __attribute__((aligned(8))) +#define __aligned_le64 __le64 __attribute__((aligned(8))) + +#endif /* __ASSEMBLY__ */ +#endif /* _UAPI_LINUX_TYPES_H */ diff --git a/include/linux/udf_fs_i.h b/include/uapi/linux/udf_fs_i.h index 3536965913b..3536965913b 100644 --- a/include/linux/udf_fs_i.h +++ b/include/uapi/linux/udf_fs_i.h diff --git a/include/uapi/linux/udp.h b/include/uapi/linux/udp.h new file mode 100644 index 00000000000..e2bcfd75a30 --- /dev/null +++ b/include/uapi/linux/udp.h @@ -0,0 +1,39 @@ +/* + * INET An implementation of the TCP/IP protocol suite for the LINUX + * operating system. INET is implemented using the BSD Socket + * interface as the means of communication with the user level. + * + * Definitions for the UDP protocol. + * + * Version: @(#)udp.h 1.0.2 04/28/93 + * + * Author: Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _UAPI_LINUX_UDP_H +#define _UAPI_LINUX_UDP_H + +#include <linux/types.h> + +struct udphdr { + __be16 source; + __be16 dest; + __be16 len; + __sum16 check; +}; + +/* UDP socket options */ +#define UDP_CORK 1 /* Never send partially complete segments */ +#define UDP_ENCAP 100 /* Set the socket to accept encapsulated packets */ + +/* UDP encapsulation types */ +#define UDP_ENCAP_ESPINUDP_NON_IKE 1 /* draft-ietf-ipsec-nat-t-ike-00/01 */ +#define UDP_ENCAP_ESPINUDP 2 /* draft-ietf-ipsec-udp-encaps-06 */ +#define UDP_ENCAP_L2TPINUDP 3 /* rfc2661 */ + + +#endif /* _UAPI_LINUX_UDP_H */ diff --git a/include/linux/uhid.h b/include/uapi/linux/uhid.h index 9c6974f1696..9c6974f1696 100644 --- a/include/linux/uhid.h +++ b/include/uapi/linux/uhid.h diff --git a/include/uapi/linux/uinput.h b/include/uapi/linux/uinput.h new file mode 100644 index 00000000000..fe46431593f --- /dev/null +++ b/include/uapi/linux/uinput.h @@ -0,0 +1,137 @@ +/* + * User level driver support for input subsystem + * + * Heavily based on evdev.c by Vojtech Pavlik + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Author: Aristeu Sergio Rozanski Filho <aris@cathedrallabs.org> + * + * Changes/Revisions: + * 0.3 24/05/2006 (Anssi Hannula <anssi.hannulagmail.com>) + * - update ff support for the changes in kernel interface + * - add UINPUT_VERSION + * 0.2 16/10/2004 (Micah Dowty <micah@navi.cx>) + * - added force feedback support + * - added UI_SET_PHYS + * 0.1 20/06/2002 + * - first public version + */ +#ifndef _UAPI__UINPUT_H_ +#define _UAPI__UINPUT_H_ + +#include <linux/types.h> +#include <linux/input.h> + +#define UINPUT_VERSION 3 + + +struct uinput_ff_upload { + __u32 request_id; + __s32 retval; + struct ff_effect effect; + struct ff_effect old; +}; + +struct uinput_ff_erase { + __u32 request_id; + __s32 retval; + __u32 effect_id; +}; + +/* ioctl */ +#define UINPUT_IOCTL_BASE 'U' +#define UI_DEV_CREATE _IO(UINPUT_IOCTL_BASE, 1) +#define UI_DEV_DESTROY _IO(UINPUT_IOCTL_BASE, 2) + +#define UI_SET_EVBIT _IOW(UINPUT_IOCTL_BASE, 100, int) +#define UI_SET_KEYBIT _IOW(UINPUT_IOCTL_BASE, 101, int) +#define UI_SET_RELBIT _IOW(UINPUT_IOCTL_BASE, 102, int) +#define UI_SET_ABSBIT _IOW(UINPUT_IOCTL_BASE, 103, int) +#define UI_SET_MSCBIT _IOW(UINPUT_IOCTL_BASE, 104, int) +#define UI_SET_LEDBIT _IOW(UINPUT_IOCTL_BASE, 105, int) +#define UI_SET_SNDBIT _IOW(UINPUT_IOCTL_BASE, 106, int) +#define UI_SET_FFBIT _IOW(UINPUT_IOCTL_BASE, 107, int) +#define UI_SET_PHYS _IOW(UINPUT_IOCTL_BASE, 108, char*) +#define UI_SET_SWBIT _IOW(UINPUT_IOCTL_BASE, 109, int) +#define UI_SET_PROPBIT _IOW(UINPUT_IOCTL_BASE, 110, int) + +#define UI_BEGIN_FF_UPLOAD _IOWR(UINPUT_IOCTL_BASE, 200, struct uinput_ff_upload) +#define UI_END_FF_UPLOAD _IOW(UINPUT_IOCTL_BASE, 201, struct uinput_ff_upload) +#define UI_BEGIN_FF_ERASE _IOWR(UINPUT_IOCTL_BASE, 202, struct uinput_ff_erase) +#define UI_END_FF_ERASE _IOW(UINPUT_IOCTL_BASE, 203, struct uinput_ff_erase) + +/* + * To write a force-feedback-capable driver, the upload_effect + * and erase_effect callbacks in input_dev must be implemented. + * The uinput driver will generate a fake input event when one of + * these callbacks are invoked. The userspace code then uses + * ioctls to retrieve additional parameters and send the return code. + * The callback blocks until this return code is sent. + * + * The described callback mechanism is only used if ff_effects_max + * is set. + * + * To implement upload_effect(): + * 1. Wait for an event with type == EV_UINPUT and code == UI_FF_UPLOAD. + * A request ID will be given in 'value'. + * 2. Allocate a uinput_ff_upload struct, fill in request_id with + * the 'value' from the EV_UINPUT event. + * 3. Issue a UI_BEGIN_FF_UPLOAD ioctl, giving it the + * uinput_ff_upload struct. It will be filled in with the + * ff_effects passed to upload_effect(). + * 4. Perform the effect upload, and place a return code back into + the uinput_ff_upload struct. + * 5. Issue a UI_END_FF_UPLOAD ioctl, also giving it the + * uinput_ff_upload_effect struct. This will complete execution + * of our upload_effect() handler. + * + * To implement erase_effect(): + * 1. Wait for an event with type == EV_UINPUT and code == UI_FF_ERASE. + * A request ID will be given in 'value'. + * 2. Allocate a uinput_ff_erase struct, fill in request_id with + * the 'value' from the EV_UINPUT event. + * 3. Issue a UI_BEGIN_FF_ERASE ioctl, giving it the + * uinput_ff_erase struct. It will be filled in with the + * effect ID passed to erase_effect(). + * 4. Perform the effect erasure, and place a return code back + * into the uinput_ff_erase struct. + * 5. Issue a UI_END_FF_ERASE ioctl, also giving it the + * uinput_ff_erase_effect struct. This will complete execution + * of our erase_effect() handler. + */ + +/* + * This is the new event type, used only by uinput. + * 'code' is UI_FF_UPLOAD or UI_FF_ERASE, and 'value' + * is the unique request ID. This number was picked + * arbitrarily, above EV_MAX (since the input system + * never sees it) but in the range of a 16-bit int. + */ +#define EV_UINPUT 0x0101 +#define UI_FF_UPLOAD 1 +#define UI_FF_ERASE 2 + +#define UINPUT_MAX_NAME_SIZE 80 +struct uinput_user_dev { + char name[UINPUT_MAX_NAME_SIZE]; + struct input_id id; + __u32 ff_effects_max; + __s32 absmax[ABS_CNT]; + __s32 absmin[ABS_CNT]; + __s32 absfuzz[ABS_CNT]; + __s32 absflat[ABS_CNT]; +}; +#endif /* _UAPI__UINPUT_H_ */ diff --git a/include/uapi/linux/uio.h b/include/uapi/linux/uio.h new file mode 100644 index 00000000000..2731d56a548 --- /dev/null +++ b/include/uapi/linux/uio.h @@ -0,0 +1,30 @@ +/* + * Berkeley style UIO structures - Alan Cox 1994. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _UAPI__LINUX_UIO_H +#define _UAPI__LINUX_UIO_H + +#include <linux/compiler.h> +#include <linux/types.h> + + +struct iovec +{ + void __user *iov_base; /* BSD uses caddr_t (1003.1g requires void *) */ + __kernel_size_t iov_len; /* Must be size_t (1003.1g) */ +}; + +/* + * UIO_MAXIOV shall be at least 16 1003.1g (5.4.1.1) + */ + +#define UIO_FASTIOV 8 +#define UIO_MAXIOV 1024 + + +#endif /* _UAPI__LINUX_UIO_H */ diff --git a/include/linux/ultrasound.h b/include/uapi/linux/ultrasound.h index 71339dc531c..71339dc531c 100644 --- a/include/linux/ultrasound.h +++ b/include/uapi/linux/ultrasound.h diff --git a/include/linux/un.h b/include/uapi/linux/un.h index 3ed3e46c1b1..3ed3e46c1b1 100644 --- a/include/linux/un.h +++ b/include/uapi/linux/un.h diff --git a/include/linux/unistd.h b/include/uapi/linux/unistd.h index aa8d5b5e2e3..aa8d5b5e2e3 100644 --- a/include/linux/unistd.h +++ b/include/uapi/linux/unistd.h diff --git a/include/linux/unix_diag.h b/include/uapi/linux/unix_diag.h index b1d2bf16b33..b1d2bf16b33 100644 --- a/include/linux/unix_diag.h +++ b/include/uapi/linux/unix_diag.h diff --git a/include/uapi/linux/usbdevice_fs.h b/include/uapi/linux/usbdevice_fs.h new file mode 100644 index 00000000000..0c65e4b1261 --- /dev/null +++ b/include/uapi/linux/usbdevice_fs.h @@ -0,0 +1,180 @@ +/*****************************************************************************/ + +/* + * usbdevice_fs.h -- USB device file system. + * + * Copyright (C) 2000 + * Thomas Sailer (sailer@ife.ee.ethz.ch) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * History: + * 0.1 04.01.2000 Created + */ + +/*****************************************************************************/ + +#ifndef _UAPI_LINUX_USBDEVICE_FS_H +#define _UAPI_LINUX_USBDEVICE_FS_H + +#include <linux/types.h> +#include <linux/magic.h> + +/* --------------------------------------------------------------------- */ + +/* usbdevfs ioctl codes */ + +struct usbdevfs_ctrltransfer { + __u8 bRequestType; + __u8 bRequest; + __u16 wValue; + __u16 wIndex; + __u16 wLength; + __u32 timeout; /* in milliseconds */ + void __user *data; +}; + +struct usbdevfs_bulktransfer { + unsigned int ep; + unsigned int len; + unsigned int timeout; /* in milliseconds */ + void __user *data; +}; + +struct usbdevfs_setinterface { + unsigned int interface; + unsigned int altsetting; +}; + +struct usbdevfs_disconnectsignal { + unsigned int signr; + void __user *context; +}; + +#define USBDEVFS_MAXDRIVERNAME 255 + +struct usbdevfs_getdriver { + unsigned int interface; + char driver[USBDEVFS_MAXDRIVERNAME + 1]; +}; + +struct usbdevfs_connectinfo { + unsigned int devnum; + unsigned char slow; +}; + +#define USBDEVFS_URB_SHORT_NOT_OK 0x01 +#define USBDEVFS_URB_ISO_ASAP 0x02 +#define USBDEVFS_URB_BULK_CONTINUATION 0x04 +#define USBDEVFS_URB_NO_FSBR 0x20 +#define USBDEVFS_URB_ZERO_PACKET 0x40 +#define USBDEVFS_URB_NO_INTERRUPT 0x80 + +#define USBDEVFS_URB_TYPE_ISO 0 +#define USBDEVFS_URB_TYPE_INTERRUPT 1 +#define USBDEVFS_URB_TYPE_CONTROL 2 +#define USBDEVFS_URB_TYPE_BULK 3 + +struct usbdevfs_iso_packet_desc { + unsigned int length; + unsigned int actual_length; + unsigned int status; +}; + +struct usbdevfs_urb { + unsigned char type; + unsigned char endpoint; + int status; + unsigned int flags; + void __user *buffer; + int buffer_length; + int actual_length; + int start_frame; + int number_of_packets; + int error_count; + unsigned int signr; /* signal to be sent on completion, + or 0 if none should be sent. */ + void __user *usercontext; + struct usbdevfs_iso_packet_desc iso_frame_desc[0]; +}; + +/* ioctls for talking directly to drivers */ +struct usbdevfs_ioctl { + int ifno; /* interface 0..N ; negative numbers reserved */ + int ioctl_code; /* MUST encode size + direction of data so the + * macros in <asm/ioctl.h> give correct values */ + void __user *data; /* param buffer (in, or out) */ +}; + +/* You can do most things with hubs just through control messages, + * except find out what device connects to what port. */ +struct usbdevfs_hub_portinfo { + char nports; /* number of downstream ports in this hub */ + char port [127]; /* e.g. port 3 connects to device 27 */ +}; + +/* Device capability flags */ +#define USBDEVFS_CAP_ZERO_PACKET 0x01 +#define USBDEVFS_CAP_BULK_CONTINUATION 0x02 +#define USBDEVFS_CAP_NO_PACKET_SIZE_LIM 0x04 +#define USBDEVFS_CAP_BULK_SCATTER_GATHER 0x08 + +/* USBDEVFS_DISCONNECT_CLAIM flags & struct */ + +/* disconnect-and-claim if the driver matches the driver field */ +#define USBDEVFS_DISCONNECT_CLAIM_IF_DRIVER 0x01 +/* disconnect-and-claim except when the driver matches the driver field */ +#define USBDEVFS_DISCONNECT_CLAIM_EXCEPT_DRIVER 0x02 + +struct usbdevfs_disconnect_claim { + unsigned int interface; + unsigned int flags; + char driver[USBDEVFS_MAXDRIVERNAME + 1]; +}; + + +#define USBDEVFS_CONTROL _IOWR('U', 0, struct usbdevfs_ctrltransfer) +#define USBDEVFS_CONTROL32 _IOWR('U', 0, struct usbdevfs_ctrltransfer32) +#define USBDEVFS_BULK _IOWR('U', 2, struct usbdevfs_bulktransfer) +#define USBDEVFS_BULK32 _IOWR('U', 2, struct usbdevfs_bulktransfer32) +#define USBDEVFS_RESETEP _IOR('U', 3, unsigned int) +#define USBDEVFS_SETINTERFACE _IOR('U', 4, struct usbdevfs_setinterface) +#define USBDEVFS_SETCONFIGURATION _IOR('U', 5, unsigned int) +#define USBDEVFS_GETDRIVER _IOW('U', 8, struct usbdevfs_getdriver) +#define USBDEVFS_SUBMITURB _IOR('U', 10, struct usbdevfs_urb) +#define USBDEVFS_SUBMITURB32 _IOR('U', 10, struct usbdevfs_urb32) +#define USBDEVFS_DISCARDURB _IO('U', 11) +#define USBDEVFS_REAPURB _IOW('U', 12, void *) +#define USBDEVFS_REAPURB32 _IOW('U', 12, __u32) +#define USBDEVFS_REAPURBNDELAY _IOW('U', 13, void *) +#define USBDEVFS_REAPURBNDELAY32 _IOW('U', 13, __u32) +#define USBDEVFS_DISCSIGNAL _IOR('U', 14, struct usbdevfs_disconnectsignal) +#define USBDEVFS_DISCSIGNAL32 _IOR('U', 14, struct usbdevfs_disconnectsignal32) +#define USBDEVFS_CLAIMINTERFACE _IOR('U', 15, unsigned int) +#define USBDEVFS_RELEASEINTERFACE _IOR('U', 16, unsigned int) +#define USBDEVFS_CONNECTINFO _IOW('U', 17, struct usbdevfs_connectinfo) +#define USBDEVFS_IOCTL _IOWR('U', 18, struct usbdevfs_ioctl) +#define USBDEVFS_IOCTL32 _IOWR('U', 18, struct usbdevfs_ioctl32) +#define USBDEVFS_HUB_PORTINFO _IOR('U', 19, struct usbdevfs_hub_portinfo) +#define USBDEVFS_RESET _IO('U', 20) +#define USBDEVFS_CLEAR_HALT _IOR('U', 21, unsigned int) +#define USBDEVFS_DISCONNECT _IO('U', 22) +#define USBDEVFS_CONNECT _IO('U', 23) +#define USBDEVFS_CLAIM_PORT _IOR('U', 24, unsigned int) +#define USBDEVFS_RELEASE_PORT _IOR('U', 25, unsigned int) +#define USBDEVFS_GET_CAPABILITIES _IOR('U', 26, __u32) +#define USBDEVFS_DISCONNECT_CLAIM _IOR('U', 27, struct usbdevfs_disconnect_claim) + +#endif /* _UAPI_LINUX_USBDEVICE_FS_H */ diff --git a/include/linux/utime.h b/include/uapi/linux/utime.h index 5cdf673afbd..5cdf673afbd 100644 --- a/include/linux/utime.h +++ b/include/uapi/linux/utime.h diff --git a/include/uapi/linux/utsname.h b/include/uapi/linux/utsname.h new file mode 100644 index 00000000000..872c2df10de --- /dev/null +++ b/include/uapi/linux/utsname.h @@ -0,0 +1,34 @@ +#ifndef _UAPI_LINUX_UTSNAME_H +#define _UAPI_LINUX_UTSNAME_H + +#define __OLD_UTS_LEN 8 + +struct oldold_utsname { + char sysname[9]; + char nodename[9]; + char release[9]; + char version[9]; + char machine[9]; +}; + +#define __NEW_UTS_LEN 64 + +struct old_utsname { + char sysname[65]; + char nodename[65]; + char release[65]; + char version[65]; + char machine[65]; +}; + +struct new_utsname { + char sysname[__NEW_UTS_LEN + 1]; + char nodename[__NEW_UTS_LEN + 1]; + char release[__NEW_UTS_LEN + 1]; + char version[__NEW_UTS_LEN + 1]; + char machine[__NEW_UTS_LEN + 1]; + char domainname[__NEW_UTS_LEN + 1]; +}; + + +#endif /* _UAPI_LINUX_UTSNAME_H */ diff --git a/include/uapi/linux/uuid.h b/include/uapi/linux/uuid.h new file mode 100644 index 00000000000..786f0773cc3 --- /dev/null +++ b/include/uapi/linux/uuid.h @@ -0,0 +1,58 @@ +/* + * UUID/GUID definition + * + * Copyright (C) 2010, Intel Corp. + * Huang Ying <ying.huang@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation; + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _UAPI_LINUX_UUID_H_ +#define _UAPI_LINUX_UUID_H_ + +#include <linux/types.h> +#include <linux/string.h> + +typedef struct { + __u8 b[16]; +} uuid_le; + +typedef struct { + __u8 b[16]; +} uuid_be; + +#define UUID_LE(a, b, c, d0, d1, d2, d3, d4, d5, d6, d7) \ +((uuid_le) \ +{{ (a) & 0xff, ((a) >> 8) & 0xff, ((a) >> 16) & 0xff, ((a) >> 24) & 0xff, \ + (b) & 0xff, ((b) >> 8) & 0xff, \ + (c) & 0xff, ((c) >> 8) & 0xff, \ + (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7) }}) + +#define UUID_BE(a, b, c, d0, d1, d2, d3, d4, d5, d6, d7) \ +((uuid_be) \ +{{ ((a) >> 24) & 0xff, ((a) >> 16) & 0xff, ((a) >> 8) & 0xff, (a) & 0xff, \ + ((b) >> 8) & 0xff, (b) & 0xff, \ + ((c) >> 8) & 0xff, (c) & 0xff, \ + (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7) }}) + +#define NULL_UUID_LE \ + UUID_LE(0x00000000, 0x0000, 0x0000, 0x00, 0x00, 0x00, 0x00, \ + 0x00, 0x00, 0x00, 0x00) + +#define NULL_UUID_BE \ + UUID_BE(0x00000000, 0x0000, 0x0000, 0x00, 0x00, 0x00, 0x00, \ + 0x00, 0x00, 0x00, 0x00) + + +#endif /* _UAPI_LINUX_UUID_H_ */ diff --git a/include/linux/uvcvideo.h b/include/uapi/linux/uvcvideo.h index 3b081862b9e..3b081862b9e 100644 --- a/include/linux/uvcvideo.h +++ b/include/uapi/linux/uvcvideo.h diff --git a/include/linux/v4l2-common.h b/include/uapi/linux/v4l2-common.h index 4f0667e010d..4f0667e010d 100644 --- a/include/linux/v4l2-common.h +++ b/include/uapi/linux/v4l2-common.h diff --git a/include/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h index 421d24c7f68..f56c945cecd 100644 --- a/include/linux/v4l2-controls.h +++ b/include/uapi/linux/v4l2-controls.h @@ -349,6 +349,7 @@ enum v4l2_mpeg_video_multi_slice_mode { #define V4L2_CID_MPEG_VIDEO_VBV_SIZE (V4L2_CID_MPEG_BASE+222) #define V4L2_CID_MPEG_VIDEO_DEC_PTS (V4L2_CID_MPEG_BASE+223) #define V4L2_CID_MPEG_VIDEO_DEC_FRAME (V4L2_CID_MPEG_BASE+224) +#define V4L2_CID_MPEG_VIDEO_VBV_DELAY (V4L2_CID_MPEG_BASE+225) #define V4L2_CID_MPEG_VIDEO_H263_I_FRAME_QP (V4L2_CID_MPEG_BASE+300) #define V4L2_CID_MPEG_VIDEO_H263_P_FRAME_QP (V4L2_CID_MPEG_BASE+301) @@ -439,6 +440,46 @@ enum v4l2_mpeg_video_h264_vui_sar_idc { V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_2x1 = 16, V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_EXTENDED = 17, }; +#define V4L2_CID_MPEG_VIDEO_H264_SEI_FRAME_PACKING (V4L2_CID_MPEG_BASE+368) +#define V4L2_CID_MPEG_VIDEO_H264_SEI_FP_CURRENT_FRAME_0 (V4L2_CID_MPEG_BASE+369) +#define V4L2_CID_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE (V4L2_CID_MPEG_BASE+370) +enum v4l2_mpeg_video_h264_sei_fp_arrangement_type { + V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_CHECKERBOARD = 0, + V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_COLUMN = 1, + V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_ROW = 2, + V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_SIDE_BY_SIDE = 3, + V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_TOP_BOTTOM = 4, + V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_TEMPORAL = 5, +}; +#define V4L2_CID_MPEG_VIDEO_H264_FMO (V4L2_CID_MPEG_BASE+371) +#define V4L2_CID_MPEG_VIDEO_H264_FMO_MAP_TYPE (V4L2_CID_MPEG_BASE+372) +enum v4l2_mpeg_video_h264_fmo_map_type { + V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_INTERLEAVED_SLICES = 0, + V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_SCATTERED_SLICES = 1, + V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_FOREGROUND_WITH_LEFT_OVER = 2, + V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_BOX_OUT = 3, + V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_RASTER_SCAN = 4, + V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_WIPE_SCAN = 5, + V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_EXPLICIT = 6, +}; +#define V4L2_CID_MPEG_VIDEO_H264_FMO_SLICE_GROUP (V4L2_CID_MPEG_BASE+373) +#define V4L2_CID_MPEG_VIDEO_H264_FMO_CHANGE_DIRECTION (V4L2_CID_MPEG_BASE+374) +enum v4l2_mpeg_video_h264_fmo_change_dir { + V4L2_MPEG_VIDEO_H264_FMO_CHANGE_DIR_RIGHT = 0, + V4L2_MPEG_VIDEO_H264_FMO_CHANGE_DIR_LEFT = 1, +}; +#define V4L2_CID_MPEG_VIDEO_H264_FMO_CHANGE_RATE (V4L2_CID_MPEG_BASE+375) +#define V4L2_CID_MPEG_VIDEO_H264_FMO_RUN_LENGTH (V4L2_CID_MPEG_BASE+376) +#define V4L2_CID_MPEG_VIDEO_H264_ASO (V4L2_CID_MPEG_BASE+377) +#define V4L2_CID_MPEG_VIDEO_H264_ASO_SLICE_ORDER (V4L2_CID_MPEG_BASE+378) +#define V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING (V4L2_CID_MPEG_BASE+379) +#define V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING_TYPE (V4L2_CID_MPEG_BASE+380) +enum v4l2_mpeg_video_h264_hierarchical_coding_type { + V4L2_MPEG_VIDEO_H264_HIERARCHICAL_CODING_B = 0, + V4L2_MPEG_VIDEO_H264_HIERARCHICAL_CODING_P = 1, +}; +#define V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING_LAYER (V4L2_CID_MPEG_BASE+381) +#define V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING_LAYER_QP (V4L2_CID_MPEG_BASE+382) #define V4L2_CID_MPEG_VIDEO_MPEG4_I_FRAME_QP (V4L2_CID_MPEG_BASE+400) #define V4L2_CID_MPEG_VIDEO_MPEG4_P_FRAME_QP (V4L2_CID_MPEG_BASE+401) #define V4L2_CID_MPEG_VIDEO_MPEG4_B_FRAME_QP (V4L2_CID_MPEG_BASE+402) @@ -757,5 +798,6 @@ enum v4l2_jpeg_chroma_subsampling { #define V4L2_CID_LINK_FREQ (V4L2_CID_IMAGE_PROC_CLASS_BASE + 1) #define V4L2_CID_PIXEL_RATE (V4L2_CID_IMAGE_PROC_CLASS_BASE + 2) +#define V4L2_CID_TEST_PATTERN (V4L2_CID_IMAGE_PROC_CLASS_BASE + 3) #endif diff --git a/include/linux/v4l2-dv-timings.h b/include/uapi/linux/v4l2-dv-timings.h index 9ef8172e5ed..9ef8172e5ed 100644 --- a/include/linux/v4l2-dv-timings.h +++ b/include/uapi/linux/v4l2-dv-timings.h diff --git a/include/linux/v4l2-mediabus.h b/include/uapi/linux/v4l2-mediabus.h index 5ea7f753a34..7d64e0e1a18 100644 --- a/include/linux/v4l2-mediabus.h +++ b/include/uapi/linux/v4l2-mediabus.h @@ -92,6 +92,11 @@ enum v4l2_mbus_pixelcode { /* JPEG compressed formats - next is 0x4002 */ V4L2_MBUS_FMT_JPEG_1X8 = 0x4001, + + /* Vendor specific formats - next is 0x5002 */ + + /* S5C73M3 sensor specific interleaved UYVY and JPEG */ + V4L2_MBUS_FMT_S5C_UYVY_JPEG_1X8 = 0x5001, }; /** diff --git a/include/linux/v4l2-subdev.h b/include/uapi/linux/v4l2-subdev.h index a33c4daadce..a33c4daadce 100644 --- a/include/linux/v4l2-subdev.h +++ b/include/uapi/linux/v4l2-subdev.h diff --git a/include/linux/veth.h b/include/uapi/linux/veth.h index 3354c1eb424..3354c1eb424 100644 --- a/include/linux/veth.h +++ b/include/uapi/linux/veth.h diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h new file mode 100644 index 00000000000..4758d1bfcf4 --- /dev/null +++ b/include/uapi/linux/vfio.h @@ -0,0 +1,368 @@ +/* + * VFIO API definition + * + * Copyright (C) 2012 Red Hat, Inc. All rights reserved. + * Author: Alex Williamson <alex.williamson@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _UAPIVFIO_H +#define _UAPIVFIO_H + +#include <linux/types.h> +#include <linux/ioctl.h> + +#define VFIO_API_VERSION 0 + + +/* Kernel & User level defines for VFIO IOCTLs. */ + +/* Extensions */ + +#define VFIO_TYPE1_IOMMU 1 + +/* + * The IOCTL interface is designed for extensibility by embedding the + * structure length (argsz) and flags into structures passed between + * kernel and userspace. We therefore use the _IO() macro for these + * defines to avoid implicitly embedding a size into the ioctl request. + * As structure fields are added, argsz will increase to match and flag + * bits will be defined to indicate additional fields with valid data. + * It's *always* the caller's responsibility to indicate the size of + * the structure passed by setting argsz appropriately. + */ + +#define VFIO_TYPE (';') +#define VFIO_BASE 100 + +/* -------- IOCTLs for VFIO file descriptor (/dev/vfio/vfio) -------- */ + +/** + * VFIO_GET_API_VERSION - _IO(VFIO_TYPE, VFIO_BASE + 0) + * + * Report the version of the VFIO API. This allows us to bump the entire + * API version should we later need to add or change features in incompatible + * ways. + * Return: VFIO_API_VERSION + * Availability: Always + */ +#define VFIO_GET_API_VERSION _IO(VFIO_TYPE, VFIO_BASE + 0) + +/** + * VFIO_CHECK_EXTENSION - _IOW(VFIO_TYPE, VFIO_BASE + 1, __u32) + * + * Check whether an extension is supported. + * Return: 0 if not supported, 1 (or some other positive integer) if supported. + * Availability: Always + */ +#define VFIO_CHECK_EXTENSION _IO(VFIO_TYPE, VFIO_BASE + 1) + +/** + * VFIO_SET_IOMMU - _IOW(VFIO_TYPE, VFIO_BASE + 2, __s32) + * + * Set the iommu to the given type. The type must be supported by an + * iommu driver as verified by calling CHECK_EXTENSION using the same + * type. A group must be set to this file descriptor before this + * ioctl is available. The IOMMU interfaces enabled by this call are + * specific to the value set. + * Return: 0 on success, -errno on failure + * Availability: When VFIO group attached + */ +#define VFIO_SET_IOMMU _IO(VFIO_TYPE, VFIO_BASE + 2) + +/* -------- IOCTLs for GROUP file descriptors (/dev/vfio/$GROUP) -------- */ + +/** + * VFIO_GROUP_GET_STATUS - _IOR(VFIO_TYPE, VFIO_BASE + 3, + * struct vfio_group_status) + * + * Retrieve information about the group. Fills in provided + * struct vfio_group_info. Caller sets argsz. + * Return: 0 on succes, -errno on failure. + * Availability: Always + */ +struct vfio_group_status { + __u32 argsz; + __u32 flags; +#define VFIO_GROUP_FLAGS_VIABLE (1 << 0) +#define VFIO_GROUP_FLAGS_CONTAINER_SET (1 << 1) +}; +#define VFIO_GROUP_GET_STATUS _IO(VFIO_TYPE, VFIO_BASE + 3) + +/** + * VFIO_GROUP_SET_CONTAINER - _IOW(VFIO_TYPE, VFIO_BASE + 4, __s32) + * + * Set the container for the VFIO group to the open VFIO file + * descriptor provided. Groups may only belong to a single + * container. Containers may, at their discretion, support multiple + * groups. Only when a container is set are all of the interfaces + * of the VFIO file descriptor and the VFIO group file descriptor + * available to the user. + * Return: 0 on success, -errno on failure. + * Availability: Always + */ +#define VFIO_GROUP_SET_CONTAINER _IO(VFIO_TYPE, VFIO_BASE + 4) + +/** + * VFIO_GROUP_UNSET_CONTAINER - _IO(VFIO_TYPE, VFIO_BASE + 5) + * + * Remove the group from the attached container. This is the + * opposite of the SET_CONTAINER call and returns the group to + * an initial state. All device file descriptors must be released + * prior to calling this interface. When removing the last group + * from a container, the IOMMU will be disabled and all state lost, + * effectively also returning the VFIO file descriptor to an initial + * state. + * Return: 0 on success, -errno on failure. + * Availability: When attached to container + */ +#define VFIO_GROUP_UNSET_CONTAINER _IO(VFIO_TYPE, VFIO_BASE + 5) + +/** + * VFIO_GROUP_GET_DEVICE_FD - _IOW(VFIO_TYPE, VFIO_BASE + 6, char) + * + * Return a new file descriptor for the device object described by + * the provided string. The string should match a device listed in + * the devices subdirectory of the IOMMU group sysfs entry. The + * group containing the device must already be added to this context. + * Return: new file descriptor on success, -errno on failure. + * Availability: When attached to container + */ +#define VFIO_GROUP_GET_DEVICE_FD _IO(VFIO_TYPE, VFIO_BASE + 6) + +/* --------------- IOCTLs for DEVICE file descriptors --------------- */ + +/** + * VFIO_DEVICE_GET_INFO - _IOR(VFIO_TYPE, VFIO_BASE + 7, + * struct vfio_device_info) + * + * Retrieve information about the device. Fills in provided + * struct vfio_device_info. Caller sets argsz. + * Return: 0 on success, -errno on failure. + */ +struct vfio_device_info { + __u32 argsz; + __u32 flags; +#define VFIO_DEVICE_FLAGS_RESET (1 << 0) /* Device supports reset */ +#define VFIO_DEVICE_FLAGS_PCI (1 << 1) /* vfio-pci device */ + __u32 num_regions; /* Max region index + 1 */ + __u32 num_irqs; /* Max IRQ index + 1 */ +}; +#define VFIO_DEVICE_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 7) + +/** + * VFIO_DEVICE_GET_REGION_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 8, + * struct vfio_region_info) + * + * Retrieve information about a device region. Caller provides + * struct vfio_region_info with index value set. Caller sets argsz. + * Implementation of region mapping is bus driver specific. This is + * intended to describe MMIO, I/O port, as well as bus specific + * regions (ex. PCI config space). Zero sized regions may be used + * to describe unimplemented regions (ex. unimplemented PCI BARs). + * Return: 0 on success, -errno on failure. + */ +struct vfio_region_info { + __u32 argsz; + __u32 flags; +#define VFIO_REGION_INFO_FLAG_READ (1 << 0) /* Region supports read */ +#define VFIO_REGION_INFO_FLAG_WRITE (1 << 1) /* Region supports write */ +#define VFIO_REGION_INFO_FLAG_MMAP (1 << 2) /* Region supports mmap */ + __u32 index; /* Region index */ + __u32 resv; /* Reserved for alignment */ + __u64 size; /* Region size (bytes) */ + __u64 offset; /* Region offset from start of device fd */ +}; +#define VFIO_DEVICE_GET_REGION_INFO _IO(VFIO_TYPE, VFIO_BASE + 8) + +/** + * VFIO_DEVICE_GET_IRQ_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 9, + * struct vfio_irq_info) + * + * Retrieve information about a device IRQ. Caller provides + * struct vfio_irq_info with index value set. Caller sets argsz. + * Implementation of IRQ mapping is bus driver specific. Indexes + * using multiple IRQs are primarily intended to support MSI-like + * interrupt blocks. Zero count irq blocks may be used to describe + * unimplemented interrupt types. + * + * The EVENTFD flag indicates the interrupt index supports eventfd based + * signaling. + * + * The MASKABLE flags indicates the index supports MASK and UNMASK + * actions described below. + * + * AUTOMASKED indicates that after signaling, the interrupt line is + * automatically masked by VFIO and the user needs to unmask the line + * to receive new interrupts. This is primarily intended to distinguish + * level triggered interrupts. + * + * The NORESIZE flag indicates that the interrupt lines within the index + * are setup as a set and new subindexes cannot be enabled without first + * disabling the entire index. This is used for interrupts like PCI MSI + * and MSI-X where the driver may only use a subset of the available + * indexes, but VFIO needs to enable a specific number of vectors + * upfront. In the case of MSI-X, where the user can enable MSI-X and + * then add and unmask vectors, it's up to userspace to make the decision + * whether to allocate the maximum supported number of vectors or tear + * down setup and incrementally increase the vectors as each is enabled. + */ +struct vfio_irq_info { + __u32 argsz; + __u32 flags; +#define VFIO_IRQ_INFO_EVENTFD (1 << 0) +#define VFIO_IRQ_INFO_MASKABLE (1 << 1) +#define VFIO_IRQ_INFO_AUTOMASKED (1 << 2) +#define VFIO_IRQ_INFO_NORESIZE (1 << 3) + __u32 index; /* IRQ index */ + __u32 count; /* Number of IRQs within this index */ +}; +#define VFIO_DEVICE_GET_IRQ_INFO _IO(VFIO_TYPE, VFIO_BASE + 9) + +/** + * VFIO_DEVICE_SET_IRQS - _IOW(VFIO_TYPE, VFIO_BASE + 10, struct vfio_irq_set) + * + * Set signaling, masking, and unmasking of interrupts. Caller provides + * struct vfio_irq_set with all fields set. 'start' and 'count' indicate + * the range of subindexes being specified. + * + * The DATA flags specify the type of data provided. If DATA_NONE, the + * operation performs the specified action immediately on the specified + * interrupt(s). For example, to unmask AUTOMASKED interrupt [0,0]: + * flags = (DATA_NONE|ACTION_UNMASK), index = 0, start = 0, count = 1. + * + * DATA_BOOL allows sparse support for the same on arrays of interrupts. + * For example, to mask interrupts [0,1] and [0,3] (but not [0,2]): + * flags = (DATA_BOOL|ACTION_MASK), index = 0, start = 1, count = 3, + * data = {1,0,1} + * + * DATA_EVENTFD binds the specified ACTION to the provided __s32 eventfd. + * A value of -1 can be used to either de-assign interrupts if already + * assigned or skip un-assigned interrupts. For example, to set an eventfd + * to be trigger for interrupts [0,0] and [0,2]: + * flags = (DATA_EVENTFD|ACTION_TRIGGER), index = 0, start = 0, count = 3, + * data = {fd1, -1, fd2} + * If index [0,1] is previously set, two count = 1 ioctls calls would be + * required to set [0,0] and [0,2] without changing [0,1]. + * + * Once a signaling mechanism is set, DATA_BOOL or DATA_NONE can be used + * with ACTION_TRIGGER to perform kernel level interrupt loopback testing + * from userspace (ie. simulate hardware triggering). + * + * Setting of an event triggering mechanism to userspace for ACTION_TRIGGER + * enables the interrupt index for the device. Individual subindex interrupts + * can be disabled using the -1 value for DATA_EVENTFD or the index can be + * disabled as a whole with: flags = (DATA_NONE|ACTION_TRIGGER), count = 0. + * + * Note that ACTION_[UN]MASK specify user->kernel signaling (irqfds) while + * ACTION_TRIGGER specifies kernel->user signaling. + */ +struct vfio_irq_set { + __u32 argsz; + __u32 flags; +#define VFIO_IRQ_SET_DATA_NONE (1 << 0) /* Data not present */ +#define VFIO_IRQ_SET_DATA_BOOL (1 << 1) /* Data is bool (u8) */ +#define VFIO_IRQ_SET_DATA_EVENTFD (1 << 2) /* Data is eventfd (s32) */ +#define VFIO_IRQ_SET_ACTION_MASK (1 << 3) /* Mask interrupt */ +#define VFIO_IRQ_SET_ACTION_UNMASK (1 << 4) /* Unmask interrupt */ +#define VFIO_IRQ_SET_ACTION_TRIGGER (1 << 5) /* Trigger interrupt */ + __u32 index; + __u32 start; + __u32 count; + __u8 data[]; +}; +#define VFIO_DEVICE_SET_IRQS _IO(VFIO_TYPE, VFIO_BASE + 10) + +#define VFIO_IRQ_SET_DATA_TYPE_MASK (VFIO_IRQ_SET_DATA_NONE | \ + VFIO_IRQ_SET_DATA_BOOL | \ + VFIO_IRQ_SET_DATA_EVENTFD) +#define VFIO_IRQ_SET_ACTION_TYPE_MASK (VFIO_IRQ_SET_ACTION_MASK | \ + VFIO_IRQ_SET_ACTION_UNMASK | \ + VFIO_IRQ_SET_ACTION_TRIGGER) +/** + * VFIO_DEVICE_RESET - _IO(VFIO_TYPE, VFIO_BASE + 11) + * + * Reset a device. + */ +#define VFIO_DEVICE_RESET _IO(VFIO_TYPE, VFIO_BASE + 11) + +/* + * The VFIO-PCI bus driver makes use of the following fixed region and + * IRQ index mapping. Unimplemented regions return a size of zero. + * Unimplemented IRQ types return a count of zero. + */ + +enum { + VFIO_PCI_BAR0_REGION_INDEX, + VFIO_PCI_BAR1_REGION_INDEX, + VFIO_PCI_BAR2_REGION_INDEX, + VFIO_PCI_BAR3_REGION_INDEX, + VFIO_PCI_BAR4_REGION_INDEX, + VFIO_PCI_BAR5_REGION_INDEX, + VFIO_PCI_ROM_REGION_INDEX, + VFIO_PCI_CONFIG_REGION_INDEX, + VFIO_PCI_NUM_REGIONS +}; + +enum { + VFIO_PCI_INTX_IRQ_INDEX, + VFIO_PCI_MSI_IRQ_INDEX, + VFIO_PCI_MSIX_IRQ_INDEX, + VFIO_PCI_NUM_IRQS +}; + +/* -------- API for Type1 VFIO IOMMU -------- */ + +/** + * VFIO_IOMMU_GET_INFO - _IOR(VFIO_TYPE, VFIO_BASE + 12, struct vfio_iommu_info) + * + * Retrieve information about the IOMMU object. Fills in provided + * struct vfio_iommu_info. Caller sets argsz. + * + * XXX Should we do these by CHECK_EXTENSION too? + */ +struct vfio_iommu_type1_info { + __u32 argsz; + __u32 flags; +#define VFIO_IOMMU_INFO_PGSIZES (1 << 0) /* supported page sizes info */ + __u64 iova_pgsizes; /* Bitmap of supported page sizes */ +}; + +#define VFIO_IOMMU_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12) + +/** + * VFIO_IOMMU_MAP_DMA - _IOW(VFIO_TYPE, VFIO_BASE + 13, struct vfio_dma_map) + * + * Map process virtual addresses to IO virtual addresses using the + * provided struct vfio_dma_map. Caller sets argsz. READ &/ WRITE required. + */ +struct vfio_iommu_type1_dma_map { + __u32 argsz; + __u32 flags; +#define VFIO_DMA_MAP_FLAG_READ (1 << 0) /* readable from device */ +#define VFIO_DMA_MAP_FLAG_WRITE (1 << 1) /* writable from device */ + __u64 vaddr; /* Process virtual address */ + __u64 iova; /* IO virtual address */ + __u64 size; /* Size of mapping (bytes) */ +}; + +#define VFIO_IOMMU_MAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 13) + +/** + * VFIO_IOMMU_UNMAP_DMA - _IOW(VFIO_TYPE, VFIO_BASE + 14, struct vfio_dma_unmap) + * + * Unmap IO virtual addresses using the provided struct vfio_dma_unmap. + * Caller sets argsz. + */ +struct vfio_iommu_type1_dma_unmap { + __u32 argsz; + __u32 flags; + __u64 iova; /* IO virtual address */ + __u64 size; /* Size of mapping (bytes) */ +}; + +#define VFIO_IOMMU_UNMAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 14) + +#endif /* _UAPIVFIO_H */ diff --git a/include/linux/vhost.h b/include/uapi/linux/vhost.h index e847f1e3075..e847f1e3075 100644 --- a/include/linux/vhost.h +++ b/include/uapi/linux/vhost.h diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h new file mode 100644 index 00000000000..57bfa59cda7 --- /dev/null +++ b/include/uapi/linux/videodev2.h @@ -0,0 +1,1998 @@ +/* + * Video for Linux Two header file + * + * Copyright (C) 1999-2012 the contributors + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Alternatively you can redistribute this file under the terms of the + * BSD license as stated below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. The names of its contributors may not be used to endorse or promote + * products derived from this software without specific prior written + * permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED + * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * Header file for v4l or V4L2 drivers and applications + * with public API. + * All kernel-specific stuff were moved to media/v4l2-dev.h, so + * no #if __KERNEL tests are allowed here + * + * See http://linuxtv.org for more info + * + * Author: Bill Dirks <bill@thedirks.org> + * Justin Schoeman + * Hans Verkuil <hverkuil@xs4all.nl> + * et al. + */ +#ifndef _UAPI__LINUX_VIDEODEV2_H +#define _UAPI__LINUX_VIDEODEV2_H + +#ifndef __KERNEL__ +#include <sys/time.h> +#endif +#include <linux/compiler.h> +#include <linux/ioctl.h> +#include <linux/types.h> +#include <linux/v4l2-common.h> +#include <linux/v4l2-controls.h> + +/* + * Common stuff for both V4L1 and V4L2 + * Moved from videodev.h + */ +#define VIDEO_MAX_FRAME 32 +#define VIDEO_MAX_PLANES 8 + +#ifndef __KERNEL__ + +/* These defines are V4L1 specific and should not be used with the V4L2 API! + They will be removed from this header in the future. */ + +#define VID_TYPE_CAPTURE 1 /* Can capture */ +#define VID_TYPE_TUNER 2 /* Can tune */ +#define VID_TYPE_TELETEXT 4 /* Does teletext */ +#define VID_TYPE_OVERLAY 8 /* Overlay onto frame buffer */ +#define VID_TYPE_CHROMAKEY 16 /* Overlay by chromakey */ +#define VID_TYPE_CLIPPING 32 /* Can clip */ +#define VID_TYPE_FRAMERAM 64 /* Uses the frame buffer memory */ +#define VID_TYPE_SCALES 128 /* Scalable */ +#define VID_TYPE_MONOCHROME 256 /* Monochrome only */ +#define VID_TYPE_SUBCAPTURE 512 /* Can capture subareas of the image */ +#define VID_TYPE_MPEG_DECODER 1024 /* Can decode MPEG streams */ +#define VID_TYPE_MPEG_ENCODER 2048 /* Can encode MPEG streams */ +#define VID_TYPE_MJPEG_DECODER 4096 /* Can decode MJPEG streams */ +#define VID_TYPE_MJPEG_ENCODER 8192 /* Can encode MJPEG streams */ +#endif + +/* + * M I S C E L L A N E O U S + */ + +/* Four-character-code (FOURCC) */ +#define v4l2_fourcc(a, b, c, d)\ + ((__u32)(a) | ((__u32)(b) << 8) | ((__u32)(c) << 16) | ((__u32)(d) << 24)) + +/* + * E N U M S + */ +enum v4l2_field { + V4L2_FIELD_ANY = 0, /* driver can choose from none, + top, bottom, interlaced + depending on whatever it thinks + is approximate ... */ + V4L2_FIELD_NONE = 1, /* this device has no fields ... */ + V4L2_FIELD_TOP = 2, /* top field only */ + V4L2_FIELD_BOTTOM = 3, /* bottom field only */ + V4L2_FIELD_INTERLACED = 4, /* both fields interlaced */ + V4L2_FIELD_SEQ_TB = 5, /* both fields sequential into one + buffer, top-bottom order */ + V4L2_FIELD_SEQ_BT = 6, /* same as above + bottom-top order */ + V4L2_FIELD_ALTERNATE = 7, /* both fields alternating into + separate buffers */ + V4L2_FIELD_INTERLACED_TB = 8, /* both fields interlaced, top field + first and the top field is + transmitted first */ + V4L2_FIELD_INTERLACED_BT = 9, /* both fields interlaced, top field + first and the bottom field is + transmitted first */ +}; +#define V4L2_FIELD_HAS_TOP(field) \ + ((field) == V4L2_FIELD_TOP ||\ + (field) == V4L2_FIELD_INTERLACED ||\ + (field) == V4L2_FIELD_INTERLACED_TB ||\ + (field) == V4L2_FIELD_INTERLACED_BT ||\ + (field) == V4L2_FIELD_SEQ_TB ||\ + (field) == V4L2_FIELD_SEQ_BT) +#define V4L2_FIELD_HAS_BOTTOM(field) \ + ((field) == V4L2_FIELD_BOTTOM ||\ + (field) == V4L2_FIELD_INTERLACED ||\ + (field) == V4L2_FIELD_INTERLACED_TB ||\ + (field) == V4L2_FIELD_INTERLACED_BT ||\ + (field) == V4L2_FIELD_SEQ_TB ||\ + (field) == V4L2_FIELD_SEQ_BT) +#define V4L2_FIELD_HAS_BOTH(field) \ + ((field) == V4L2_FIELD_INTERLACED ||\ + (field) == V4L2_FIELD_INTERLACED_TB ||\ + (field) == V4L2_FIELD_INTERLACED_BT ||\ + (field) == V4L2_FIELD_SEQ_TB ||\ + (field) == V4L2_FIELD_SEQ_BT) + +enum v4l2_buf_type { + V4L2_BUF_TYPE_VIDEO_CAPTURE = 1, + V4L2_BUF_TYPE_VIDEO_OUTPUT = 2, + V4L2_BUF_TYPE_VIDEO_OVERLAY = 3, + V4L2_BUF_TYPE_VBI_CAPTURE = 4, + V4L2_BUF_TYPE_VBI_OUTPUT = 5, + V4L2_BUF_TYPE_SLICED_VBI_CAPTURE = 6, + V4L2_BUF_TYPE_SLICED_VBI_OUTPUT = 7, +#if 1 + /* Experimental */ + V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY = 8, +#endif + V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE = 9, + V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE = 10, + /* Deprecated, do not use */ + V4L2_BUF_TYPE_PRIVATE = 0x80, +}; + +#define V4L2_TYPE_IS_MULTIPLANAR(type) \ + ((type) == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE \ + || (type) == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) + +#define V4L2_TYPE_IS_OUTPUT(type) \ + ((type) == V4L2_BUF_TYPE_VIDEO_OUTPUT \ + || (type) == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE \ + || (type) == V4L2_BUF_TYPE_VIDEO_OVERLAY \ + || (type) == V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY \ + || (type) == V4L2_BUF_TYPE_VBI_OUTPUT \ + || (type) == V4L2_BUF_TYPE_SLICED_VBI_OUTPUT) + +enum v4l2_tuner_type { + V4L2_TUNER_RADIO = 1, + V4L2_TUNER_ANALOG_TV = 2, + V4L2_TUNER_DIGITAL_TV = 3, +}; + +enum v4l2_memory { + V4L2_MEMORY_MMAP = 1, + V4L2_MEMORY_USERPTR = 2, + V4L2_MEMORY_OVERLAY = 3, +}; + +/* see also http://vektor.theorem.ca/graphics/ycbcr/ */ +enum v4l2_colorspace { + /* ITU-R 601 -- broadcast NTSC/PAL */ + V4L2_COLORSPACE_SMPTE170M = 1, + + /* 1125-Line (US) HDTV */ + V4L2_COLORSPACE_SMPTE240M = 2, + + /* HD and modern captures. */ + V4L2_COLORSPACE_REC709 = 3, + + /* broken BT878 extents (601, luma range 16-253 instead of 16-235) */ + V4L2_COLORSPACE_BT878 = 4, + + /* These should be useful. Assume 601 extents. */ + V4L2_COLORSPACE_470_SYSTEM_M = 5, + V4L2_COLORSPACE_470_SYSTEM_BG = 6, + + /* I know there will be cameras that send this. So, this is + * unspecified chromaticities and full 0-255 on each of the + * Y'CbCr components + */ + V4L2_COLORSPACE_JPEG = 7, + + /* For RGB colourspaces, this is probably a good start. */ + V4L2_COLORSPACE_SRGB = 8, +}; + +enum v4l2_priority { + V4L2_PRIORITY_UNSET = 0, /* not initialized */ + V4L2_PRIORITY_BACKGROUND = 1, + V4L2_PRIORITY_INTERACTIVE = 2, + V4L2_PRIORITY_RECORD = 3, + V4L2_PRIORITY_DEFAULT = V4L2_PRIORITY_INTERACTIVE, +}; + +struct v4l2_rect { + __s32 left; + __s32 top; + __s32 width; + __s32 height; +}; + +struct v4l2_fract { + __u32 numerator; + __u32 denominator; +}; + +/** + * struct v4l2_capability - Describes V4L2 device caps returned by VIDIOC_QUERYCAP + * + * @driver: name of the driver module (e.g. "bttv") + * @card: name of the card (e.g. "Hauppauge WinTV") + * @bus_info: name of the bus (e.g. "PCI:" + pci_name(pci_dev) ) + * @version: KERNEL_VERSION + * @capabilities: capabilities of the physical device as a whole + * @device_caps: capabilities accessed via this particular device (node) + * @reserved: reserved fields for future extensions + */ +struct v4l2_capability { + __u8 driver[16]; + __u8 card[32]; + __u8 bus_info[32]; + __u32 version; + __u32 capabilities; + __u32 device_caps; + __u32 reserved[3]; +}; + +/* Values for 'capabilities' field */ +#define V4L2_CAP_VIDEO_CAPTURE 0x00000001 /* Is a video capture device */ +#define V4L2_CAP_VIDEO_OUTPUT 0x00000002 /* Is a video output device */ +#define V4L2_CAP_VIDEO_OVERLAY 0x00000004 /* Can do video overlay */ +#define V4L2_CAP_VBI_CAPTURE 0x00000010 /* Is a raw VBI capture device */ +#define V4L2_CAP_VBI_OUTPUT 0x00000020 /* Is a raw VBI output device */ +#define V4L2_CAP_SLICED_VBI_CAPTURE 0x00000040 /* Is a sliced VBI capture device */ +#define V4L2_CAP_SLICED_VBI_OUTPUT 0x00000080 /* Is a sliced VBI output device */ +#define V4L2_CAP_RDS_CAPTURE 0x00000100 /* RDS data capture */ +#define V4L2_CAP_VIDEO_OUTPUT_OVERLAY 0x00000200 /* Can do video output overlay */ +#define V4L2_CAP_HW_FREQ_SEEK 0x00000400 /* Can do hardware frequency seek */ +#define V4L2_CAP_RDS_OUTPUT 0x00000800 /* Is an RDS encoder */ + +/* Is a video capture device that supports multiplanar formats */ +#define V4L2_CAP_VIDEO_CAPTURE_MPLANE 0x00001000 +/* Is a video output device that supports multiplanar formats */ +#define V4L2_CAP_VIDEO_OUTPUT_MPLANE 0x00002000 +/* Is a video mem-to-mem device that supports multiplanar formats */ +#define V4L2_CAP_VIDEO_M2M_MPLANE 0x00004000 +/* Is a video mem-to-mem device */ +#define V4L2_CAP_VIDEO_M2M 0x00008000 + +#define V4L2_CAP_TUNER 0x00010000 /* has a tuner */ +#define V4L2_CAP_AUDIO 0x00020000 /* has audio support */ +#define V4L2_CAP_RADIO 0x00040000 /* is a radio device */ +#define V4L2_CAP_MODULATOR 0x00080000 /* has a modulator */ + +#define V4L2_CAP_READWRITE 0x01000000 /* read/write systemcalls */ +#define V4L2_CAP_ASYNCIO 0x02000000 /* async I/O */ +#define V4L2_CAP_STREAMING 0x04000000 /* streaming I/O ioctls */ + +#define V4L2_CAP_DEVICE_CAPS 0x80000000 /* sets device capabilities field */ + +/* + * V I D E O I M A G E F O R M A T + */ +struct v4l2_pix_format { + __u32 width; + __u32 height; + __u32 pixelformat; + __u32 field; /* enum v4l2_field */ + __u32 bytesperline; /* for padding, zero if unused */ + __u32 sizeimage; + __u32 colorspace; /* enum v4l2_colorspace */ + __u32 priv; /* private data, depends on pixelformat */ +}; + +/* Pixel format FOURCC depth Description */ + +/* RGB formats */ +#define V4L2_PIX_FMT_RGB332 v4l2_fourcc('R', 'G', 'B', '1') /* 8 RGB-3-3-2 */ +#define V4L2_PIX_FMT_RGB444 v4l2_fourcc('R', '4', '4', '4') /* 16 xxxxrrrr ggggbbbb */ +#define V4L2_PIX_FMT_RGB555 v4l2_fourcc('R', 'G', 'B', 'O') /* 16 RGB-5-5-5 */ +#define V4L2_PIX_FMT_RGB565 v4l2_fourcc('R', 'G', 'B', 'P') /* 16 RGB-5-6-5 */ +#define V4L2_PIX_FMT_RGB555X v4l2_fourcc('R', 'G', 'B', 'Q') /* 16 RGB-5-5-5 BE */ +#define V4L2_PIX_FMT_RGB565X v4l2_fourcc('R', 'G', 'B', 'R') /* 16 RGB-5-6-5 BE */ +#define V4L2_PIX_FMT_BGR666 v4l2_fourcc('B', 'G', 'R', 'H') /* 18 BGR-6-6-6 */ +#define V4L2_PIX_FMT_BGR24 v4l2_fourcc('B', 'G', 'R', '3') /* 24 BGR-8-8-8 */ +#define V4L2_PIX_FMT_RGB24 v4l2_fourcc('R', 'G', 'B', '3') /* 24 RGB-8-8-8 */ +#define V4L2_PIX_FMT_BGR32 v4l2_fourcc('B', 'G', 'R', '4') /* 32 BGR-8-8-8-8 */ +#define V4L2_PIX_FMT_RGB32 v4l2_fourcc('R', 'G', 'B', '4') /* 32 RGB-8-8-8-8 */ + +/* Grey formats */ +#define V4L2_PIX_FMT_GREY v4l2_fourcc('G', 'R', 'E', 'Y') /* 8 Greyscale */ +#define V4L2_PIX_FMT_Y4 v4l2_fourcc('Y', '0', '4', ' ') /* 4 Greyscale */ +#define V4L2_PIX_FMT_Y6 v4l2_fourcc('Y', '0', '6', ' ') /* 6 Greyscale */ +#define V4L2_PIX_FMT_Y10 v4l2_fourcc('Y', '1', '0', ' ') /* 10 Greyscale */ +#define V4L2_PIX_FMT_Y12 v4l2_fourcc('Y', '1', '2', ' ') /* 12 Greyscale */ +#define V4L2_PIX_FMT_Y16 v4l2_fourcc('Y', '1', '6', ' ') /* 16 Greyscale */ + +/* Grey bit-packed formats */ +#define V4L2_PIX_FMT_Y10BPACK v4l2_fourcc('Y', '1', '0', 'B') /* 10 Greyscale bit-packed */ + +/* Palette formats */ +#define V4L2_PIX_FMT_PAL8 v4l2_fourcc('P', 'A', 'L', '8') /* 8 8-bit palette */ + +/* Luminance+Chrominance formats */ +#define V4L2_PIX_FMT_YVU410 v4l2_fourcc('Y', 'V', 'U', '9') /* 9 YVU 4:1:0 */ +#define V4L2_PIX_FMT_YVU420 v4l2_fourcc('Y', 'V', '1', '2') /* 12 YVU 4:2:0 */ +#define V4L2_PIX_FMT_YUYV v4l2_fourcc('Y', 'U', 'Y', 'V') /* 16 YUV 4:2:2 */ +#define V4L2_PIX_FMT_YYUV v4l2_fourcc('Y', 'Y', 'U', 'V') /* 16 YUV 4:2:2 */ +#define V4L2_PIX_FMT_YVYU v4l2_fourcc('Y', 'V', 'Y', 'U') /* 16 YVU 4:2:2 */ +#define V4L2_PIX_FMT_UYVY v4l2_fourcc('U', 'Y', 'V', 'Y') /* 16 YUV 4:2:2 */ +#define V4L2_PIX_FMT_VYUY v4l2_fourcc('V', 'Y', 'U', 'Y') /* 16 YUV 4:2:2 */ +#define V4L2_PIX_FMT_YUV422P v4l2_fourcc('4', '2', '2', 'P') /* 16 YVU422 planar */ +#define V4L2_PIX_FMT_YUV411P v4l2_fourcc('4', '1', '1', 'P') /* 16 YVU411 planar */ +#define V4L2_PIX_FMT_Y41P v4l2_fourcc('Y', '4', '1', 'P') /* 12 YUV 4:1:1 */ +#define V4L2_PIX_FMT_YUV444 v4l2_fourcc('Y', '4', '4', '4') /* 16 xxxxyyyy uuuuvvvv */ +#define V4L2_PIX_FMT_YUV555 v4l2_fourcc('Y', 'U', 'V', 'O') /* 16 YUV-5-5-5 */ +#define V4L2_PIX_FMT_YUV565 v4l2_fourcc('Y', 'U', 'V', 'P') /* 16 YUV-5-6-5 */ +#define V4L2_PIX_FMT_YUV32 v4l2_fourcc('Y', 'U', 'V', '4') /* 32 YUV-8-8-8-8 */ +#define V4L2_PIX_FMT_YUV410 v4l2_fourcc('Y', 'U', 'V', '9') /* 9 YUV 4:1:0 */ +#define V4L2_PIX_FMT_YUV420 v4l2_fourcc('Y', 'U', '1', '2') /* 12 YUV 4:2:0 */ +#define V4L2_PIX_FMT_HI240 v4l2_fourcc('H', 'I', '2', '4') /* 8 8-bit color */ +#define V4L2_PIX_FMT_HM12 v4l2_fourcc('H', 'M', '1', '2') /* 8 YUV 4:2:0 16x16 macroblocks */ +#define V4L2_PIX_FMT_M420 v4l2_fourcc('M', '4', '2', '0') /* 12 YUV 4:2:0 2 lines y, 1 line uv interleaved */ + +/* two planes -- one Y, one Cr + Cb interleaved */ +#define V4L2_PIX_FMT_NV12 v4l2_fourcc('N', 'V', '1', '2') /* 12 Y/CbCr 4:2:0 */ +#define V4L2_PIX_FMT_NV21 v4l2_fourcc('N', 'V', '2', '1') /* 12 Y/CrCb 4:2:0 */ +#define V4L2_PIX_FMT_NV16 v4l2_fourcc('N', 'V', '1', '6') /* 16 Y/CbCr 4:2:2 */ +#define V4L2_PIX_FMT_NV61 v4l2_fourcc('N', 'V', '6', '1') /* 16 Y/CrCb 4:2:2 */ +#define V4L2_PIX_FMT_NV24 v4l2_fourcc('N', 'V', '2', '4') /* 24 Y/CbCr 4:4:4 */ +#define V4L2_PIX_FMT_NV42 v4l2_fourcc('N', 'V', '4', '2') /* 24 Y/CrCb 4:4:4 */ + +/* two non contiguous planes - one Y, one Cr + Cb interleaved */ +#define V4L2_PIX_FMT_NV12M v4l2_fourcc('N', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 */ +#define V4L2_PIX_FMT_NV21M v4l2_fourcc('N', 'M', '2', '1') /* 21 Y/CrCb 4:2:0 */ +#define V4L2_PIX_FMT_NV12MT v4l2_fourcc('T', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 64x32 macroblocks */ +#define V4L2_PIX_FMT_NV12MT_16X16 v4l2_fourcc('V', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 16x16 macroblocks */ + +/* three non contiguous planes - Y, Cb, Cr */ +#define V4L2_PIX_FMT_YUV420M v4l2_fourcc('Y', 'M', '1', '2') /* 12 YUV420 planar */ +#define V4L2_PIX_FMT_YVU420M v4l2_fourcc('Y', 'M', '2', '1') /* 12 YVU420 planar */ + +/* Bayer formats - see http://www.siliconimaging.com/RGB%20Bayer.htm */ +#define V4L2_PIX_FMT_SBGGR8 v4l2_fourcc('B', 'A', '8', '1') /* 8 BGBG.. GRGR.. */ +#define V4L2_PIX_FMT_SGBRG8 v4l2_fourcc('G', 'B', 'R', 'G') /* 8 GBGB.. RGRG.. */ +#define V4L2_PIX_FMT_SGRBG8 v4l2_fourcc('G', 'R', 'B', 'G') /* 8 GRGR.. BGBG.. */ +#define V4L2_PIX_FMT_SRGGB8 v4l2_fourcc('R', 'G', 'G', 'B') /* 8 RGRG.. GBGB.. */ +#define V4L2_PIX_FMT_SBGGR10 v4l2_fourcc('B', 'G', '1', '0') /* 10 BGBG.. GRGR.. */ +#define V4L2_PIX_FMT_SGBRG10 v4l2_fourcc('G', 'B', '1', '0') /* 10 GBGB.. RGRG.. */ +#define V4L2_PIX_FMT_SGRBG10 v4l2_fourcc('B', 'A', '1', '0') /* 10 GRGR.. BGBG.. */ +#define V4L2_PIX_FMT_SRGGB10 v4l2_fourcc('R', 'G', '1', '0') /* 10 RGRG.. GBGB.. */ +#define V4L2_PIX_FMT_SBGGR12 v4l2_fourcc('B', 'G', '1', '2') /* 12 BGBG.. GRGR.. */ +#define V4L2_PIX_FMT_SGBRG12 v4l2_fourcc('G', 'B', '1', '2') /* 12 GBGB.. RGRG.. */ +#define V4L2_PIX_FMT_SGRBG12 v4l2_fourcc('B', 'A', '1', '2') /* 12 GRGR.. BGBG.. */ +#define V4L2_PIX_FMT_SRGGB12 v4l2_fourcc('R', 'G', '1', '2') /* 12 RGRG.. GBGB.. */ + /* 10bit raw bayer DPCM compressed to 8 bits */ +#define V4L2_PIX_FMT_SBGGR10DPCM8 v4l2_fourcc('b', 'B', 'A', '8') +#define V4L2_PIX_FMT_SGBRG10DPCM8 v4l2_fourcc('b', 'G', 'A', '8') +#define V4L2_PIX_FMT_SGRBG10DPCM8 v4l2_fourcc('B', 'D', '1', '0') +#define V4L2_PIX_FMT_SRGGB10DPCM8 v4l2_fourcc('b', 'R', 'A', '8') + /* + * 10bit raw bayer, expanded to 16 bits + * xxxxrrrrrrrrrrxxxxgggggggggg xxxxggggggggggxxxxbbbbbbbbbb... + */ +#define V4L2_PIX_FMT_SBGGR16 v4l2_fourcc('B', 'Y', 'R', '2') /* 16 BGBG.. GRGR.. */ + +/* compressed formats */ +#define V4L2_PIX_FMT_MJPEG v4l2_fourcc('M', 'J', 'P', 'G') /* Motion-JPEG */ +#define V4L2_PIX_FMT_JPEG v4l2_fourcc('J', 'P', 'E', 'G') /* JFIF JPEG */ +#define V4L2_PIX_FMT_DV v4l2_fourcc('d', 'v', 's', 'd') /* 1394 */ +#define V4L2_PIX_FMT_MPEG v4l2_fourcc('M', 'P', 'E', 'G') /* MPEG-1/2/4 Multiplexed */ +#define V4L2_PIX_FMT_H264 v4l2_fourcc('H', '2', '6', '4') /* H264 with start codes */ +#define V4L2_PIX_FMT_H264_NO_SC v4l2_fourcc('A', 'V', 'C', '1') /* H264 without start codes */ +#define V4L2_PIX_FMT_H264_MVC v4l2_fourcc('M', '2', '6', '4') /* H264 MVC */ +#define V4L2_PIX_FMT_H263 v4l2_fourcc('H', '2', '6', '3') /* H263 */ +#define V4L2_PIX_FMT_MPEG1 v4l2_fourcc('M', 'P', 'G', '1') /* MPEG-1 ES */ +#define V4L2_PIX_FMT_MPEG2 v4l2_fourcc('M', 'P', 'G', '2') /* MPEG-2 ES */ +#define V4L2_PIX_FMT_MPEG4 v4l2_fourcc('M', 'P', 'G', '4') /* MPEG-4 ES */ +#define V4L2_PIX_FMT_XVID v4l2_fourcc('X', 'V', 'I', 'D') /* Xvid */ +#define V4L2_PIX_FMT_VC1_ANNEX_G v4l2_fourcc('V', 'C', '1', 'G') /* SMPTE 421M Annex G compliant stream */ +#define V4L2_PIX_FMT_VC1_ANNEX_L v4l2_fourcc('V', 'C', '1', 'L') /* SMPTE 421M Annex L compliant stream */ +#define V4L2_PIX_FMT_VP8 v4l2_fourcc('V', 'P', '8', '0') /* VP8 */ + +/* Vendor-specific formats */ +#define V4L2_PIX_FMT_CPIA1 v4l2_fourcc('C', 'P', 'I', 'A') /* cpia1 YUV */ +#define V4L2_PIX_FMT_WNVA v4l2_fourcc('W', 'N', 'V', 'A') /* Winnov hw compress */ +#define V4L2_PIX_FMT_SN9C10X v4l2_fourcc('S', '9', '1', '0') /* SN9C10x compression */ +#define V4L2_PIX_FMT_SN9C20X_I420 v4l2_fourcc('S', '9', '2', '0') /* SN9C20x YUV 4:2:0 */ +#define V4L2_PIX_FMT_PWC1 v4l2_fourcc('P', 'W', 'C', '1') /* pwc older webcam */ +#define V4L2_PIX_FMT_PWC2 v4l2_fourcc('P', 'W', 'C', '2') /* pwc newer webcam */ +#define V4L2_PIX_FMT_ET61X251 v4l2_fourcc('E', '6', '2', '5') /* ET61X251 compression */ +#define V4L2_PIX_FMT_SPCA501 v4l2_fourcc('S', '5', '0', '1') /* YUYV per line */ +#define V4L2_PIX_FMT_SPCA505 v4l2_fourcc('S', '5', '0', '5') /* YYUV per line */ +#define V4L2_PIX_FMT_SPCA508 v4l2_fourcc('S', '5', '0', '8') /* YUVY per line */ +#define V4L2_PIX_FMT_SPCA561 v4l2_fourcc('S', '5', '6', '1') /* compressed GBRG bayer */ +#define V4L2_PIX_FMT_PAC207 v4l2_fourcc('P', '2', '0', '7') /* compressed BGGR bayer */ +#define V4L2_PIX_FMT_MR97310A v4l2_fourcc('M', '3', '1', '0') /* compressed BGGR bayer */ +#define V4L2_PIX_FMT_JL2005BCD v4l2_fourcc('J', 'L', '2', '0') /* compressed RGGB bayer */ +#define V4L2_PIX_FMT_SN9C2028 v4l2_fourcc('S', 'O', 'N', 'X') /* compressed GBRG bayer */ +#define V4L2_PIX_FMT_SQ905C v4l2_fourcc('9', '0', '5', 'C') /* compressed RGGB bayer */ +#define V4L2_PIX_FMT_PJPG v4l2_fourcc('P', 'J', 'P', 'G') /* Pixart 73xx JPEG */ +#define V4L2_PIX_FMT_OV511 v4l2_fourcc('O', '5', '1', '1') /* ov511 JPEG */ +#define V4L2_PIX_FMT_OV518 v4l2_fourcc('O', '5', '1', '8') /* ov518 JPEG */ +#define V4L2_PIX_FMT_STV0680 v4l2_fourcc('S', '6', '8', '0') /* stv0680 bayer */ +#define V4L2_PIX_FMT_TM6000 v4l2_fourcc('T', 'M', '6', '0') /* tm5600/tm60x0 */ +#define V4L2_PIX_FMT_CIT_YYVYUY v4l2_fourcc('C', 'I', 'T', 'V') /* one line of Y then 1 line of VYUY */ +#define V4L2_PIX_FMT_KONICA420 v4l2_fourcc('K', 'O', 'N', 'I') /* YUV420 planar in blocks of 256 pixels */ +#define V4L2_PIX_FMT_JPGL v4l2_fourcc('J', 'P', 'G', 'L') /* JPEG-Lite */ +#define V4L2_PIX_FMT_SE401 v4l2_fourcc('S', '4', '0', '1') /* se401 janggu compressed rgb */ +#define V4L2_PIX_FMT_S5C_UYVY_JPG v4l2_fourcc('S', '5', 'C', 'I') /* S5C73M3 interleaved UYVY/JPEG */ + +/* + * F O R M A T E N U M E R A T I O N + */ +struct v4l2_fmtdesc { + __u32 index; /* Format number */ + __u32 type; /* enum v4l2_buf_type */ + __u32 flags; + __u8 description[32]; /* Description string */ + __u32 pixelformat; /* Format fourcc */ + __u32 reserved[4]; +}; + +#define V4L2_FMT_FLAG_COMPRESSED 0x0001 +#define V4L2_FMT_FLAG_EMULATED 0x0002 + +#if 1 + /* Experimental Frame Size and frame rate enumeration */ +/* + * F R A M E S I Z E E N U M E R A T I O N + */ +enum v4l2_frmsizetypes { + V4L2_FRMSIZE_TYPE_DISCRETE = 1, + V4L2_FRMSIZE_TYPE_CONTINUOUS = 2, + V4L2_FRMSIZE_TYPE_STEPWISE = 3, +}; + +struct v4l2_frmsize_discrete { + __u32 width; /* Frame width [pixel] */ + __u32 height; /* Frame height [pixel] */ +}; + +struct v4l2_frmsize_stepwise { + __u32 min_width; /* Minimum frame width [pixel] */ + __u32 max_width; /* Maximum frame width [pixel] */ + __u32 step_width; /* Frame width step size [pixel] */ + __u32 min_height; /* Minimum frame height [pixel] */ + __u32 max_height; /* Maximum frame height [pixel] */ + __u32 step_height; /* Frame height step size [pixel] */ +}; + +struct v4l2_frmsizeenum { + __u32 index; /* Frame size number */ + __u32 pixel_format; /* Pixel format */ + __u32 type; /* Frame size type the device supports. */ + + union { /* Frame size */ + struct v4l2_frmsize_discrete discrete; + struct v4l2_frmsize_stepwise stepwise; + }; + + __u32 reserved[2]; /* Reserved space for future use */ +}; + +/* + * F R A M E R A T E E N U M E R A T I O N + */ +enum v4l2_frmivaltypes { + V4L2_FRMIVAL_TYPE_DISCRETE = 1, + V4L2_FRMIVAL_TYPE_CONTINUOUS = 2, + V4L2_FRMIVAL_TYPE_STEPWISE = 3, +}; + +struct v4l2_frmival_stepwise { + struct v4l2_fract min; /* Minimum frame interval [s] */ + struct v4l2_fract max; /* Maximum frame interval [s] */ + struct v4l2_fract step; /* Frame interval step size [s] */ +}; + +struct v4l2_frmivalenum { + __u32 index; /* Frame format index */ + __u32 pixel_format; /* Pixel format */ + __u32 width; /* Frame width */ + __u32 height; /* Frame height */ + __u32 type; /* Frame interval type the device supports. */ + + union { /* Frame interval */ + struct v4l2_fract discrete; + struct v4l2_frmival_stepwise stepwise; + }; + + __u32 reserved[2]; /* Reserved space for future use */ +}; +#endif + +/* + * T I M E C O D E + */ +struct v4l2_timecode { + __u32 type; + __u32 flags; + __u8 frames; + __u8 seconds; + __u8 minutes; + __u8 hours; + __u8 userbits[4]; +}; + +/* Type */ +#define V4L2_TC_TYPE_24FPS 1 +#define V4L2_TC_TYPE_25FPS 2 +#define V4L2_TC_TYPE_30FPS 3 +#define V4L2_TC_TYPE_50FPS 4 +#define V4L2_TC_TYPE_60FPS 5 + +/* Flags */ +#define V4L2_TC_FLAG_DROPFRAME 0x0001 /* "drop-frame" mode */ +#define V4L2_TC_FLAG_COLORFRAME 0x0002 +#define V4L2_TC_USERBITS_field 0x000C +#define V4L2_TC_USERBITS_USERDEFINED 0x0000 +#define V4L2_TC_USERBITS_8BITCHARS 0x0008 +/* The above is based on SMPTE timecodes */ + +struct v4l2_jpegcompression { + int quality; + + int APPn; /* Number of APP segment to be written, + * must be 0..15 */ + int APP_len; /* Length of data in JPEG APPn segment */ + char APP_data[60]; /* Data in the JPEG APPn segment. */ + + int COM_len; /* Length of data in JPEG COM segment */ + char COM_data[60]; /* Data in JPEG COM segment */ + + __u32 jpeg_markers; /* Which markers should go into the JPEG + * output. Unless you exactly know what + * you do, leave them untouched. + * Inluding less markers will make the + * resulting code smaller, but there will + * be fewer applications which can read it. + * The presence of the APP and COM marker + * is influenced by APP_len and COM_len + * ONLY, not by this property! */ + +#define V4L2_JPEG_MARKER_DHT (1<<3) /* Define Huffman Tables */ +#define V4L2_JPEG_MARKER_DQT (1<<4) /* Define Quantization Tables */ +#define V4L2_JPEG_MARKER_DRI (1<<5) /* Define Restart Interval */ +#define V4L2_JPEG_MARKER_COM (1<<6) /* Comment segment */ +#define V4L2_JPEG_MARKER_APP (1<<7) /* App segment, driver will + * allways use APP0 */ +}; + +/* + * M E M O R Y - M A P P I N G B U F F E R S + */ +struct v4l2_requestbuffers { + __u32 count; + __u32 type; /* enum v4l2_buf_type */ + __u32 memory; /* enum v4l2_memory */ + __u32 reserved[2]; +}; + +/** + * struct v4l2_plane - plane info for multi-planar buffers + * @bytesused: number of bytes occupied by data in the plane (payload) + * @length: size of this plane (NOT the payload) in bytes + * @mem_offset: when memory in the associated struct v4l2_buffer is + * V4L2_MEMORY_MMAP, equals the offset from the start of + * the device memory for this plane (or is a "cookie" that + * should be passed to mmap() called on the video node) + * @userptr: when memory is V4L2_MEMORY_USERPTR, a userspace pointer + * pointing to this plane + * @data_offset: offset in the plane to the start of data; usually 0, + * unless there is a header in front of the data + * + * Multi-planar buffers consist of one or more planes, e.g. an YCbCr buffer + * with two planes can have one plane for Y, and another for interleaved CbCr + * components. Each plane can reside in a separate memory buffer, or even in + * a completely separate memory node (e.g. in embedded devices). + */ +struct v4l2_plane { + __u32 bytesused; + __u32 length; + union { + __u32 mem_offset; + unsigned long userptr; + } m; + __u32 data_offset; + __u32 reserved[11]; +}; + +/** + * struct v4l2_buffer - video buffer info + * @index: id number of the buffer + * @type: enum v4l2_buf_type; buffer type (type == *_MPLANE for + * multiplanar buffers); + * @bytesused: number of bytes occupied by data in the buffer (payload); + * unused (set to 0) for multiplanar buffers + * @flags: buffer informational flags + * @field: enum v4l2_field; field order of the image in the buffer + * @timestamp: frame timestamp + * @timecode: frame timecode + * @sequence: sequence count of this frame + * @memory: enum v4l2_memory; the method, in which the actual video data is + * passed + * @offset: for non-multiplanar buffers with memory == V4L2_MEMORY_MMAP; + * offset from the start of the device memory for this plane, + * (or a "cookie" that should be passed to mmap() as offset) + * @userptr: for non-multiplanar buffers with memory == V4L2_MEMORY_USERPTR; + * a userspace pointer pointing to this buffer + * @planes: for multiplanar buffers; userspace pointer to the array of plane + * info structs for this buffer + * @length: size in bytes of the buffer (NOT its payload) for single-plane + * buffers (when type != *_MPLANE); number of elements in the + * planes array for multi-plane buffers + * @input: input number from which the video data has has been captured + * + * Contains data exchanged by application and driver using one of the Streaming + * I/O methods. + */ +struct v4l2_buffer { + __u32 index; + __u32 type; + __u32 bytesused; + __u32 flags; + __u32 field; + struct timeval timestamp; + struct v4l2_timecode timecode; + __u32 sequence; + + /* memory location */ + __u32 memory; + union { + __u32 offset; + unsigned long userptr; + struct v4l2_plane *planes; + } m; + __u32 length; + __u32 reserved2; + __u32 reserved; +}; + +/* Flags for 'flags' field */ +#define V4L2_BUF_FLAG_MAPPED 0x0001 /* Buffer is mapped (flag) */ +#define V4L2_BUF_FLAG_QUEUED 0x0002 /* Buffer is queued for processing */ +#define V4L2_BUF_FLAG_DONE 0x0004 /* Buffer is ready */ +#define V4L2_BUF_FLAG_KEYFRAME 0x0008 /* Image is a keyframe (I-frame) */ +#define V4L2_BUF_FLAG_PFRAME 0x0010 /* Image is a P-frame */ +#define V4L2_BUF_FLAG_BFRAME 0x0020 /* Image is a B-frame */ +/* Buffer is ready, but the data contained within is corrupted. */ +#define V4L2_BUF_FLAG_ERROR 0x0040 +#define V4L2_BUF_FLAG_TIMECODE 0x0100 /* timecode field is valid */ +#define V4L2_BUF_FLAG_PREPARED 0x0400 /* Buffer is prepared for queuing */ +/* Cache handling flags */ +#define V4L2_BUF_FLAG_NO_CACHE_INVALIDATE 0x0800 +#define V4L2_BUF_FLAG_NO_CACHE_CLEAN 0x1000 + +/* + * O V E R L A Y P R E V I E W + */ +struct v4l2_framebuffer { + __u32 capability; + __u32 flags; +/* FIXME: in theory we should pass something like PCI device + memory + * region + offset instead of some physical address */ + void *base; + struct v4l2_pix_format fmt; +}; +/* Flags for the 'capability' field. Read only */ +#define V4L2_FBUF_CAP_EXTERNOVERLAY 0x0001 +#define V4L2_FBUF_CAP_CHROMAKEY 0x0002 +#define V4L2_FBUF_CAP_LIST_CLIPPING 0x0004 +#define V4L2_FBUF_CAP_BITMAP_CLIPPING 0x0008 +#define V4L2_FBUF_CAP_LOCAL_ALPHA 0x0010 +#define V4L2_FBUF_CAP_GLOBAL_ALPHA 0x0020 +#define V4L2_FBUF_CAP_LOCAL_INV_ALPHA 0x0040 +#define V4L2_FBUF_CAP_SRC_CHROMAKEY 0x0080 +/* Flags for the 'flags' field. */ +#define V4L2_FBUF_FLAG_PRIMARY 0x0001 +#define V4L2_FBUF_FLAG_OVERLAY 0x0002 +#define V4L2_FBUF_FLAG_CHROMAKEY 0x0004 +#define V4L2_FBUF_FLAG_LOCAL_ALPHA 0x0008 +#define V4L2_FBUF_FLAG_GLOBAL_ALPHA 0x0010 +#define V4L2_FBUF_FLAG_LOCAL_INV_ALPHA 0x0020 +#define V4L2_FBUF_FLAG_SRC_CHROMAKEY 0x0040 + +struct v4l2_clip { + struct v4l2_rect c; + struct v4l2_clip __user *next; +}; + +struct v4l2_window { + struct v4l2_rect w; + __u32 field; /* enum v4l2_field */ + __u32 chromakey; + struct v4l2_clip __user *clips; + __u32 clipcount; + void __user *bitmap; + __u8 global_alpha; +}; + +/* + * C A P T U R E P A R A M E T E R S + */ +struct v4l2_captureparm { + __u32 capability; /* Supported modes */ + __u32 capturemode; /* Current mode */ + struct v4l2_fract timeperframe; /* Time per frame in .1us units */ + __u32 extendedmode; /* Driver-specific extensions */ + __u32 readbuffers; /* # of buffers for read */ + __u32 reserved[4]; +}; + +/* Flags for 'capability' and 'capturemode' fields */ +#define V4L2_MODE_HIGHQUALITY 0x0001 /* High quality imaging mode */ +#define V4L2_CAP_TIMEPERFRAME 0x1000 /* timeperframe field is supported */ + +struct v4l2_outputparm { + __u32 capability; /* Supported modes */ + __u32 outputmode; /* Current mode */ + struct v4l2_fract timeperframe; /* Time per frame in seconds */ + __u32 extendedmode; /* Driver-specific extensions */ + __u32 writebuffers; /* # of buffers for write */ + __u32 reserved[4]; +}; + +/* + * I N P U T I M A G E C R O P P I N G + */ +struct v4l2_cropcap { + __u32 type; /* enum v4l2_buf_type */ + struct v4l2_rect bounds; + struct v4l2_rect defrect; + struct v4l2_fract pixelaspect; +}; + +struct v4l2_crop { + __u32 type; /* enum v4l2_buf_type */ + struct v4l2_rect c; +}; + +/** + * struct v4l2_selection - selection info + * @type: buffer type (do not use *_MPLANE types) + * @target: Selection target, used to choose one of possible rectangles; + * defined in v4l2-common.h; V4L2_SEL_TGT_* . + * @flags: constraints flags, defined in v4l2-common.h; V4L2_SEL_FLAG_*. + * @r: coordinates of selection window + * @reserved: for future use, rounds structure size to 64 bytes, set to zero + * + * Hardware may use multiple helper windows to process a video stream. + * The structure is used to exchange this selection areas between + * an application and a driver. + */ +struct v4l2_selection { + __u32 type; + __u32 target; + __u32 flags; + struct v4l2_rect r; + __u32 reserved[9]; +}; + + +/* + * A N A L O G V I D E O S T A N D A R D + */ + +typedef __u64 v4l2_std_id; + +/* one bit for each */ +#define V4L2_STD_PAL_B ((v4l2_std_id)0x00000001) +#define V4L2_STD_PAL_B1 ((v4l2_std_id)0x00000002) +#define V4L2_STD_PAL_G ((v4l2_std_id)0x00000004) +#define V4L2_STD_PAL_H ((v4l2_std_id)0x00000008) +#define V4L2_STD_PAL_I ((v4l2_std_id)0x00000010) +#define V4L2_STD_PAL_D ((v4l2_std_id)0x00000020) +#define V4L2_STD_PAL_D1 ((v4l2_std_id)0x00000040) +#define V4L2_STD_PAL_K ((v4l2_std_id)0x00000080) + +#define V4L2_STD_PAL_M ((v4l2_std_id)0x00000100) +#define V4L2_STD_PAL_N ((v4l2_std_id)0x00000200) +#define V4L2_STD_PAL_Nc ((v4l2_std_id)0x00000400) +#define V4L2_STD_PAL_60 ((v4l2_std_id)0x00000800) + +#define V4L2_STD_NTSC_M ((v4l2_std_id)0x00001000) /* BTSC */ +#define V4L2_STD_NTSC_M_JP ((v4l2_std_id)0x00002000) /* EIA-J */ +#define V4L2_STD_NTSC_443 ((v4l2_std_id)0x00004000) +#define V4L2_STD_NTSC_M_KR ((v4l2_std_id)0x00008000) /* FM A2 */ + +#define V4L2_STD_SECAM_B ((v4l2_std_id)0x00010000) +#define V4L2_STD_SECAM_D ((v4l2_std_id)0x00020000) +#define V4L2_STD_SECAM_G ((v4l2_std_id)0x00040000) +#define V4L2_STD_SECAM_H ((v4l2_std_id)0x00080000) +#define V4L2_STD_SECAM_K ((v4l2_std_id)0x00100000) +#define V4L2_STD_SECAM_K1 ((v4l2_std_id)0x00200000) +#define V4L2_STD_SECAM_L ((v4l2_std_id)0x00400000) +#define V4L2_STD_SECAM_LC ((v4l2_std_id)0x00800000) + +/* ATSC/HDTV */ +#define V4L2_STD_ATSC_8_VSB ((v4l2_std_id)0x01000000) +#define V4L2_STD_ATSC_16_VSB ((v4l2_std_id)0x02000000) + +/* FIXME: + Although std_id is 64 bits, there is an issue on PPC32 architecture that + makes switch(__u64) to break. So, there's a hack on v4l2-common.c rounding + this value to 32 bits. + As, currently, the max value is for V4L2_STD_ATSC_16_VSB (30 bits wide), + it should work fine. However, if needed to add more than two standards, + v4l2-common.c should be fixed. + */ + +/* + * Some macros to merge video standards in order to make live easier for the + * drivers and V4L2 applications + */ + +/* + * "Common" NTSC/M - It should be noticed that V4L2_STD_NTSC_443 is + * Missing here. + */ +#define V4L2_STD_NTSC (V4L2_STD_NTSC_M |\ + V4L2_STD_NTSC_M_JP |\ + V4L2_STD_NTSC_M_KR) +/* Secam macros */ +#define V4L2_STD_SECAM_DK (V4L2_STD_SECAM_D |\ + V4L2_STD_SECAM_K |\ + V4L2_STD_SECAM_K1) +/* All Secam Standards */ +#define V4L2_STD_SECAM (V4L2_STD_SECAM_B |\ + V4L2_STD_SECAM_G |\ + V4L2_STD_SECAM_H |\ + V4L2_STD_SECAM_DK |\ + V4L2_STD_SECAM_L |\ + V4L2_STD_SECAM_LC) +/* PAL macros */ +#define V4L2_STD_PAL_BG (V4L2_STD_PAL_B |\ + V4L2_STD_PAL_B1 |\ + V4L2_STD_PAL_G) +#define V4L2_STD_PAL_DK (V4L2_STD_PAL_D |\ + V4L2_STD_PAL_D1 |\ + V4L2_STD_PAL_K) +/* + * "Common" PAL - This macro is there to be compatible with the old + * V4L1 concept of "PAL": /BGDKHI. + * Several PAL standards are mising here: /M, /N and /Nc + */ +#define V4L2_STD_PAL (V4L2_STD_PAL_BG |\ + V4L2_STD_PAL_DK |\ + V4L2_STD_PAL_H |\ + V4L2_STD_PAL_I) +/* Chroma "agnostic" standards */ +#define V4L2_STD_B (V4L2_STD_PAL_B |\ + V4L2_STD_PAL_B1 |\ + V4L2_STD_SECAM_B) +#define V4L2_STD_G (V4L2_STD_PAL_G |\ + V4L2_STD_SECAM_G) +#define V4L2_STD_H (V4L2_STD_PAL_H |\ + V4L2_STD_SECAM_H) +#define V4L2_STD_L (V4L2_STD_SECAM_L |\ + V4L2_STD_SECAM_LC) +#define V4L2_STD_GH (V4L2_STD_G |\ + V4L2_STD_H) +#define V4L2_STD_DK (V4L2_STD_PAL_DK |\ + V4L2_STD_SECAM_DK) +#define V4L2_STD_BG (V4L2_STD_B |\ + V4L2_STD_G) +#define V4L2_STD_MN (V4L2_STD_PAL_M |\ + V4L2_STD_PAL_N |\ + V4L2_STD_PAL_Nc |\ + V4L2_STD_NTSC) + +/* Standards where MTS/BTSC stereo could be found */ +#define V4L2_STD_MTS (V4L2_STD_NTSC_M |\ + V4L2_STD_PAL_M |\ + V4L2_STD_PAL_N |\ + V4L2_STD_PAL_Nc) + +/* Standards for Countries with 60Hz Line frequency */ +#define V4L2_STD_525_60 (V4L2_STD_PAL_M |\ + V4L2_STD_PAL_60 |\ + V4L2_STD_NTSC |\ + V4L2_STD_NTSC_443) +/* Standards for Countries with 50Hz Line frequency */ +#define V4L2_STD_625_50 (V4L2_STD_PAL |\ + V4L2_STD_PAL_N |\ + V4L2_STD_PAL_Nc |\ + V4L2_STD_SECAM) + +#define V4L2_STD_ATSC (V4L2_STD_ATSC_8_VSB |\ + V4L2_STD_ATSC_16_VSB) +/* Macros with none and all analog standards */ +#define V4L2_STD_UNKNOWN 0 +#define V4L2_STD_ALL (V4L2_STD_525_60 |\ + V4L2_STD_625_50) + +struct v4l2_standard { + __u32 index; + v4l2_std_id id; + __u8 name[24]; + struct v4l2_fract frameperiod; /* Frames, not fields */ + __u32 framelines; + __u32 reserved[4]; +}; + +/* The DV Preset API is deprecated in favor of the DV Timings API. + New drivers shouldn't use this anymore! */ + +/* + * V I D E O T I M I N G S D V P R E S E T + */ +struct v4l2_dv_preset { + __u32 preset; + __u32 reserved[4]; +}; + +/* + * D V P R E S E T S E N U M E R A T I O N + */ +struct v4l2_dv_enum_preset { + __u32 index; + __u32 preset; + __u8 name[32]; /* Name of the preset timing */ + __u32 width; + __u32 height; + __u32 reserved[4]; +}; + +/* + * D V P R E S E T V A L U E S + */ +#define V4L2_DV_INVALID 0 +#define V4L2_DV_480P59_94 1 /* BT.1362 */ +#define V4L2_DV_576P50 2 /* BT.1362 */ +#define V4L2_DV_720P24 3 /* SMPTE 296M */ +#define V4L2_DV_720P25 4 /* SMPTE 296M */ +#define V4L2_DV_720P30 5 /* SMPTE 296M */ +#define V4L2_DV_720P50 6 /* SMPTE 296M */ +#define V4L2_DV_720P59_94 7 /* SMPTE 274M */ +#define V4L2_DV_720P60 8 /* SMPTE 274M/296M */ +#define V4L2_DV_1080I29_97 9 /* BT.1120/ SMPTE 274M */ +#define V4L2_DV_1080I30 10 /* BT.1120/ SMPTE 274M */ +#define V4L2_DV_1080I25 11 /* BT.1120 */ +#define V4L2_DV_1080I50 12 /* SMPTE 296M */ +#define V4L2_DV_1080I60 13 /* SMPTE 296M */ +#define V4L2_DV_1080P24 14 /* SMPTE 296M */ +#define V4L2_DV_1080P25 15 /* SMPTE 296M */ +#define V4L2_DV_1080P30 16 /* SMPTE 296M */ +#define V4L2_DV_1080P50 17 /* BT.1120 */ +#define V4L2_DV_1080P60 18 /* BT.1120 */ + +/* + * D V B T T I M I N G S + */ + +/** struct v4l2_bt_timings - BT.656/BT.1120 timing data + * @width: total width of the active video in pixels + * @height: total height of the active video in lines + * @interlaced: Interlaced or progressive + * @polarities: Positive or negative polarities + * @pixelclock: Pixel clock in HZ. Ex. 74.25MHz->74250000 + * @hfrontporch:Horizontal front porch in pixels + * @hsync: Horizontal Sync length in pixels + * @hbackporch: Horizontal back porch in pixels + * @vfrontporch:Vertical front porch in lines + * @vsync: Vertical Sync length in lines + * @vbackporch: Vertical back porch in lines + * @il_vfrontporch:Vertical front porch for the even field + * (aka field 2) of interlaced field formats + * @il_vsync: Vertical Sync length for the even field + * (aka field 2) of interlaced field formats + * @il_vbackporch:Vertical back porch for the even field + * (aka field 2) of interlaced field formats + * @standards: Standards the timing belongs to + * @flags: Flags + * @reserved: Reserved fields, must be zeroed. + * + * A note regarding vertical interlaced timings: height refers to the total + * height of the active video frame (= two fields). The blanking timings refer + * to the blanking of each field. So the height of the total frame is + * calculated as follows: + * + * tot_height = height + vfrontporch + vsync + vbackporch + + * il_vfrontporch + il_vsync + il_vbackporch + * + * The active height of each field is height / 2. + */ +struct v4l2_bt_timings { + __u32 width; + __u32 height; + __u32 interlaced; + __u32 polarities; + __u64 pixelclock; + __u32 hfrontporch; + __u32 hsync; + __u32 hbackporch; + __u32 vfrontporch; + __u32 vsync; + __u32 vbackporch; + __u32 il_vfrontporch; + __u32 il_vsync; + __u32 il_vbackporch; + __u32 standards; + __u32 flags; + __u32 reserved[14]; +} __attribute__ ((packed)); + +/* Interlaced or progressive format */ +#define V4L2_DV_PROGRESSIVE 0 +#define V4L2_DV_INTERLACED 1 + +/* Polarities. If bit is not set, it is assumed to be negative polarity */ +#define V4L2_DV_VSYNC_POS_POL 0x00000001 +#define V4L2_DV_HSYNC_POS_POL 0x00000002 + +/* Timings standards */ +#define V4L2_DV_BT_STD_CEA861 (1 << 0) /* CEA-861 Digital TV Profile */ +#define V4L2_DV_BT_STD_DMT (1 << 1) /* VESA Discrete Monitor Timings */ +#define V4L2_DV_BT_STD_CVT (1 << 2) /* VESA Coordinated Video Timings */ +#define V4L2_DV_BT_STD_GTF (1 << 3) /* VESA Generalized Timings Formula */ + +/* Flags */ + +/* CVT/GTF specific: timing uses reduced blanking (CVT) or the 'Secondary + GTF' curve (GTF). In both cases the horizontal and/or vertical blanking + intervals are reduced, allowing a higher resolution over the same + bandwidth. This is a read-only flag. */ +#define V4L2_DV_FL_REDUCED_BLANKING (1 << 0) +/* CEA-861 specific: set for CEA-861 formats with a framerate of a multiple + of six. These formats can be optionally played at 1 / 1.001 speed. + This is a read-only flag. */ +#define V4L2_DV_FL_CAN_REDUCE_FPS (1 << 1) +/* CEA-861 specific: only valid for video transmitters, the flag is cleared + by receivers. + If the framerate of the format is a multiple of six, then the pixelclock + used to set up the transmitter is divided by 1.001 to make it compatible + with 60 Hz based standards such as NTSC and PAL-M that use a framerate of + 29.97 Hz. Otherwise this flag is cleared. If the transmitter can't generate + such frequencies, then the flag will also be cleared. */ +#define V4L2_DV_FL_REDUCED_FPS (1 << 2) +/* Specific to interlaced formats: if set, then field 1 is really one half-line + longer and field 2 is really one half-line shorter, so each field has + exactly the same number of half-lines. Whether half-lines can be detected + or used depends on the hardware. */ +#define V4L2_DV_FL_HALF_LINE (1 << 0) + + +/** struct v4l2_dv_timings - DV timings + * @type: the type of the timings + * @bt: BT656/1120 timings + */ +struct v4l2_dv_timings { + __u32 type; + union { + struct v4l2_bt_timings bt; + __u32 reserved[32]; + }; +} __attribute__ ((packed)); + +/* Values for the type field */ +#define V4L2_DV_BT_656_1120 0 /* BT.656/1120 timing type */ + + +/** struct v4l2_enum_dv_timings - DV timings enumeration + * @index: enumeration index + * @reserved: must be zeroed + * @timings: the timings for the given index + */ +struct v4l2_enum_dv_timings { + __u32 index; + __u32 reserved[3]; + struct v4l2_dv_timings timings; +}; + +/** struct v4l2_bt_timings_cap - BT.656/BT.1120 timing capabilities + * @min_width: width in pixels + * @max_width: width in pixels + * @min_height: height in lines + * @max_height: height in lines + * @min_pixelclock: Pixel clock in HZ. Ex. 74.25MHz->74250000 + * @max_pixelclock: Pixel clock in HZ. Ex. 74.25MHz->74250000 + * @standards: Supported standards + * @capabilities: Supported capabilities + * @reserved: Must be zeroed + */ +struct v4l2_bt_timings_cap { + __u32 min_width; + __u32 max_width; + __u32 min_height; + __u32 max_height; + __u64 min_pixelclock; + __u64 max_pixelclock; + __u32 standards; + __u32 capabilities; + __u32 reserved[16]; +} __attribute__ ((packed)); + +/* Supports interlaced formats */ +#define V4L2_DV_BT_CAP_INTERLACED (1 << 0) +/* Supports progressive formats */ +#define V4L2_DV_BT_CAP_PROGRESSIVE (1 << 1) +/* Supports CVT/GTF reduced blanking */ +#define V4L2_DV_BT_CAP_REDUCED_BLANKING (1 << 2) +/* Supports custom formats */ +#define V4L2_DV_BT_CAP_CUSTOM (1 << 3) + +/** struct v4l2_dv_timings_cap - DV timings capabilities + * @type: the type of the timings (same as in struct v4l2_dv_timings) + * @bt: the BT656/1120 timings capabilities + */ +struct v4l2_dv_timings_cap { + __u32 type; + __u32 reserved[3]; + union { + struct v4l2_bt_timings_cap bt; + __u32 raw_data[32]; + }; +}; + + +/* + * V I D E O I N P U T S + */ +struct v4l2_input { + __u32 index; /* Which input */ + __u8 name[32]; /* Label */ + __u32 type; /* Type of input */ + __u32 audioset; /* Associated audios (bitfield) */ + __u32 tuner; /* enum v4l2_tuner_type */ + v4l2_std_id std; + __u32 status; + __u32 capabilities; + __u32 reserved[3]; +}; + +/* Values for the 'type' field */ +#define V4L2_INPUT_TYPE_TUNER 1 +#define V4L2_INPUT_TYPE_CAMERA 2 + +/* field 'status' - general */ +#define V4L2_IN_ST_NO_POWER 0x00000001 /* Attached device is off */ +#define V4L2_IN_ST_NO_SIGNAL 0x00000002 +#define V4L2_IN_ST_NO_COLOR 0x00000004 + +/* field 'status' - sensor orientation */ +/* If sensor is mounted upside down set both bits */ +#define V4L2_IN_ST_HFLIP 0x00000010 /* Frames are flipped horizontally */ +#define V4L2_IN_ST_VFLIP 0x00000020 /* Frames are flipped vertically */ + +/* field 'status' - analog */ +#define V4L2_IN_ST_NO_H_LOCK 0x00000100 /* No horizontal sync lock */ +#define V4L2_IN_ST_COLOR_KILL 0x00000200 /* Color killer is active */ + +/* field 'status' - digital */ +#define V4L2_IN_ST_NO_SYNC 0x00010000 /* No synchronization lock */ +#define V4L2_IN_ST_NO_EQU 0x00020000 /* No equalizer lock */ +#define V4L2_IN_ST_NO_CARRIER 0x00040000 /* Carrier recovery failed */ + +/* field 'status' - VCR and set-top box */ +#define V4L2_IN_ST_MACROVISION 0x01000000 /* Macrovision detected */ +#define V4L2_IN_ST_NO_ACCESS 0x02000000 /* Conditional access denied */ +#define V4L2_IN_ST_VTR 0x04000000 /* VTR time constant */ + +/* capabilities flags */ +#define V4L2_IN_CAP_PRESETS 0x00000001 /* Supports S_DV_PRESET */ +#define V4L2_IN_CAP_DV_TIMINGS 0x00000002 /* Supports S_DV_TIMINGS */ +#define V4L2_IN_CAP_CUSTOM_TIMINGS V4L2_IN_CAP_DV_TIMINGS /* For compatibility */ +#define V4L2_IN_CAP_STD 0x00000004 /* Supports S_STD */ + +/* + * V I D E O O U T P U T S + */ +struct v4l2_output { + __u32 index; /* Which output */ + __u8 name[32]; /* Label */ + __u32 type; /* Type of output */ + __u32 audioset; /* Associated audios (bitfield) */ + __u32 modulator; /* Associated modulator */ + v4l2_std_id std; + __u32 capabilities; + __u32 reserved[3]; +}; +/* Values for the 'type' field */ +#define V4L2_OUTPUT_TYPE_MODULATOR 1 +#define V4L2_OUTPUT_TYPE_ANALOG 2 +#define V4L2_OUTPUT_TYPE_ANALOGVGAOVERLAY 3 + +/* capabilities flags */ +#define V4L2_OUT_CAP_PRESETS 0x00000001 /* Supports S_DV_PRESET */ +#define V4L2_OUT_CAP_DV_TIMINGS 0x00000002 /* Supports S_DV_TIMINGS */ +#define V4L2_OUT_CAP_CUSTOM_TIMINGS V4L2_OUT_CAP_DV_TIMINGS /* For compatibility */ +#define V4L2_OUT_CAP_STD 0x00000004 /* Supports S_STD */ + +/* + * C O N T R O L S + */ +struct v4l2_control { + __u32 id; + __s32 value; +}; + +struct v4l2_ext_control { + __u32 id; + __u32 size; + __u32 reserved2[1]; + union { + __s32 value; + __s64 value64; + char *string; + }; +} __attribute__ ((packed)); + +struct v4l2_ext_controls { + __u32 ctrl_class; + __u32 count; + __u32 error_idx; + __u32 reserved[2]; + struct v4l2_ext_control *controls; +}; + +#define V4L2_CTRL_ID_MASK (0x0fffffff) +#define V4L2_CTRL_ID2CLASS(id) ((id) & 0x0fff0000UL) +#define V4L2_CTRL_DRIVER_PRIV(id) (((id) & 0xffff) >= 0x1000) + +enum v4l2_ctrl_type { + V4L2_CTRL_TYPE_INTEGER = 1, + V4L2_CTRL_TYPE_BOOLEAN = 2, + V4L2_CTRL_TYPE_MENU = 3, + V4L2_CTRL_TYPE_BUTTON = 4, + V4L2_CTRL_TYPE_INTEGER64 = 5, + V4L2_CTRL_TYPE_CTRL_CLASS = 6, + V4L2_CTRL_TYPE_STRING = 7, + V4L2_CTRL_TYPE_BITMASK = 8, + V4L2_CTRL_TYPE_INTEGER_MENU = 9, +}; + +/* Used in the VIDIOC_QUERYCTRL ioctl for querying controls */ +struct v4l2_queryctrl { + __u32 id; + __u32 type; /* enum v4l2_ctrl_type */ + __u8 name[32]; /* Whatever */ + __s32 minimum; /* Note signedness */ + __s32 maximum; + __s32 step; + __s32 default_value; + __u32 flags; + __u32 reserved[2]; +}; + +/* Used in the VIDIOC_QUERYMENU ioctl for querying menu items */ +struct v4l2_querymenu { + __u32 id; + __u32 index; + union { + __u8 name[32]; /* Whatever */ + __s64 value; + }; + __u32 reserved; +} __attribute__ ((packed)); + +/* Control flags */ +#define V4L2_CTRL_FLAG_DISABLED 0x0001 +#define V4L2_CTRL_FLAG_GRABBED 0x0002 +#define V4L2_CTRL_FLAG_READ_ONLY 0x0004 +#define V4L2_CTRL_FLAG_UPDATE 0x0008 +#define V4L2_CTRL_FLAG_INACTIVE 0x0010 +#define V4L2_CTRL_FLAG_SLIDER 0x0020 +#define V4L2_CTRL_FLAG_WRITE_ONLY 0x0040 +#define V4L2_CTRL_FLAG_VOLATILE 0x0080 + +/* Query flag, to be ORed with the control ID */ +#define V4L2_CTRL_FLAG_NEXT_CTRL 0x80000000 + +/* User-class control IDs defined by V4L2 */ +#define V4L2_CID_MAX_CTRLS 1024 +/* IDs reserved for driver specific controls */ +#define V4L2_CID_PRIVATE_BASE 0x08000000 + + +/* DV-class control IDs defined by V4L2 */ +#define V4L2_CID_DV_CLASS_BASE (V4L2_CTRL_CLASS_DV | 0x900) +#define V4L2_CID_DV_CLASS (V4L2_CTRL_CLASS_DV | 1) + +#define V4L2_CID_DV_TX_HOTPLUG (V4L2_CID_DV_CLASS_BASE + 1) +#define V4L2_CID_DV_TX_RXSENSE (V4L2_CID_DV_CLASS_BASE + 2) +#define V4L2_CID_DV_TX_EDID_PRESENT (V4L2_CID_DV_CLASS_BASE + 3) +#define V4L2_CID_DV_TX_MODE (V4L2_CID_DV_CLASS_BASE + 4) +enum v4l2_dv_tx_mode { + V4L2_DV_TX_MODE_DVI_D = 0, + V4L2_DV_TX_MODE_HDMI = 1, +}; +#define V4L2_CID_DV_TX_RGB_RANGE (V4L2_CID_DV_CLASS_BASE + 5) +enum v4l2_dv_rgb_range { + V4L2_DV_RGB_RANGE_AUTO = 0, + V4L2_DV_RGB_RANGE_LIMITED = 1, + V4L2_DV_RGB_RANGE_FULL = 2, +}; + +#define V4L2_CID_DV_RX_POWER_PRESENT (V4L2_CID_DV_CLASS_BASE + 100) +#define V4L2_CID_DV_RX_RGB_RANGE (V4L2_CID_DV_CLASS_BASE + 101) + +/* + * T U N I N G + */ +struct v4l2_tuner { + __u32 index; + __u8 name[32]; + __u32 type; /* enum v4l2_tuner_type */ + __u32 capability; + __u32 rangelow; + __u32 rangehigh; + __u32 rxsubchans; + __u32 audmode; + __s32 signal; + __s32 afc; + __u32 reserved[4]; +}; + +struct v4l2_modulator { + __u32 index; + __u8 name[32]; + __u32 capability; + __u32 rangelow; + __u32 rangehigh; + __u32 txsubchans; + __u32 reserved[4]; +}; + +/* Flags for the 'capability' field */ +#define V4L2_TUNER_CAP_LOW 0x0001 +#define V4L2_TUNER_CAP_NORM 0x0002 +#define V4L2_TUNER_CAP_HWSEEK_BOUNDED 0x0004 +#define V4L2_TUNER_CAP_HWSEEK_WRAP 0x0008 +#define V4L2_TUNER_CAP_STEREO 0x0010 +#define V4L2_TUNER_CAP_LANG2 0x0020 +#define V4L2_TUNER_CAP_SAP 0x0020 +#define V4L2_TUNER_CAP_LANG1 0x0040 +#define V4L2_TUNER_CAP_RDS 0x0080 +#define V4L2_TUNER_CAP_RDS_BLOCK_IO 0x0100 +#define V4L2_TUNER_CAP_RDS_CONTROLS 0x0200 +#define V4L2_TUNER_CAP_FREQ_BANDS 0x0400 +#define V4L2_TUNER_CAP_HWSEEK_PROG_LIM 0x0800 + +/* Flags for the 'rxsubchans' field */ +#define V4L2_TUNER_SUB_MONO 0x0001 +#define V4L2_TUNER_SUB_STEREO 0x0002 +#define V4L2_TUNER_SUB_LANG2 0x0004 +#define V4L2_TUNER_SUB_SAP 0x0004 +#define V4L2_TUNER_SUB_LANG1 0x0008 +#define V4L2_TUNER_SUB_RDS 0x0010 + +/* Values for the 'audmode' field */ +#define V4L2_TUNER_MODE_MONO 0x0000 +#define V4L2_TUNER_MODE_STEREO 0x0001 +#define V4L2_TUNER_MODE_LANG2 0x0002 +#define V4L2_TUNER_MODE_SAP 0x0002 +#define V4L2_TUNER_MODE_LANG1 0x0003 +#define V4L2_TUNER_MODE_LANG1_LANG2 0x0004 + +struct v4l2_frequency { + __u32 tuner; + __u32 type; /* enum v4l2_tuner_type */ + __u32 frequency; + __u32 reserved[8]; +}; + +#define V4L2_BAND_MODULATION_VSB (1 << 1) +#define V4L2_BAND_MODULATION_FM (1 << 2) +#define V4L2_BAND_MODULATION_AM (1 << 3) + +struct v4l2_frequency_band { + __u32 tuner; + __u32 type; /* enum v4l2_tuner_type */ + __u32 index; + __u32 capability; + __u32 rangelow; + __u32 rangehigh; + __u32 modulation; + __u32 reserved[9]; +}; + +struct v4l2_hw_freq_seek { + __u32 tuner; + __u32 type; /* enum v4l2_tuner_type */ + __u32 seek_upward; + __u32 wrap_around; + __u32 spacing; + __u32 rangelow; + __u32 rangehigh; + __u32 reserved[5]; +}; + +/* + * R D S + */ + +struct v4l2_rds_data { + __u8 lsb; + __u8 msb; + __u8 block; +} __attribute__ ((packed)); + +#define V4L2_RDS_BLOCK_MSK 0x7 +#define V4L2_RDS_BLOCK_A 0 +#define V4L2_RDS_BLOCK_B 1 +#define V4L2_RDS_BLOCK_C 2 +#define V4L2_RDS_BLOCK_D 3 +#define V4L2_RDS_BLOCK_C_ALT 4 +#define V4L2_RDS_BLOCK_INVALID 7 + +#define V4L2_RDS_BLOCK_CORRECTED 0x40 +#define V4L2_RDS_BLOCK_ERROR 0x80 + +/* + * A U D I O + */ +struct v4l2_audio { + __u32 index; + __u8 name[32]; + __u32 capability; + __u32 mode; + __u32 reserved[2]; +}; + +/* Flags for the 'capability' field */ +#define V4L2_AUDCAP_STEREO 0x00001 +#define V4L2_AUDCAP_AVL 0x00002 + +/* Flags for the 'mode' field */ +#define V4L2_AUDMODE_AVL 0x00001 + +struct v4l2_audioout { + __u32 index; + __u8 name[32]; + __u32 capability; + __u32 mode; + __u32 reserved[2]; +}; + +/* + * M P E G S E R V I C E S + * + * NOTE: EXPERIMENTAL API + */ +#if 1 +#define V4L2_ENC_IDX_FRAME_I (0) +#define V4L2_ENC_IDX_FRAME_P (1) +#define V4L2_ENC_IDX_FRAME_B (2) +#define V4L2_ENC_IDX_FRAME_MASK (0xf) + +struct v4l2_enc_idx_entry { + __u64 offset; + __u64 pts; + __u32 length; + __u32 flags; + __u32 reserved[2]; +}; + +#define V4L2_ENC_IDX_ENTRIES (64) +struct v4l2_enc_idx { + __u32 entries; + __u32 entries_cap; + __u32 reserved[4]; + struct v4l2_enc_idx_entry entry[V4L2_ENC_IDX_ENTRIES]; +}; + + +#define V4L2_ENC_CMD_START (0) +#define V4L2_ENC_CMD_STOP (1) +#define V4L2_ENC_CMD_PAUSE (2) +#define V4L2_ENC_CMD_RESUME (3) + +/* Flags for V4L2_ENC_CMD_STOP */ +#define V4L2_ENC_CMD_STOP_AT_GOP_END (1 << 0) + +struct v4l2_encoder_cmd { + __u32 cmd; + __u32 flags; + union { + struct { + __u32 data[8]; + } raw; + }; +}; + +/* Decoder commands */ +#define V4L2_DEC_CMD_START (0) +#define V4L2_DEC_CMD_STOP (1) +#define V4L2_DEC_CMD_PAUSE (2) +#define V4L2_DEC_CMD_RESUME (3) + +/* Flags for V4L2_DEC_CMD_START */ +#define V4L2_DEC_CMD_START_MUTE_AUDIO (1 << 0) + +/* Flags for V4L2_DEC_CMD_PAUSE */ +#define V4L2_DEC_CMD_PAUSE_TO_BLACK (1 << 0) + +/* Flags for V4L2_DEC_CMD_STOP */ +#define V4L2_DEC_CMD_STOP_TO_BLACK (1 << 0) +#define V4L2_DEC_CMD_STOP_IMMEDIATELY (1 << 1) + +/* Play format requirements (returned by the driver): */ + +/* The decoder has no special format requirements */ +#define V4L2_DEC_START_FMT_NONE (0) +/* The decoder requires full GOPs */ +#define V4L2_DEC_START_FMT_GOP (1) + +/* The structure must be zeroed before use by the application + This ensures it can be extended safely in the future. */ +struct v4l2_decoder_cmd { + __u32 cmd; + __u32 flags; + union { + struct { + __u64 pts; + } stop; + + struct { + /* 0 or 1000 specifies normal speed, + 1 specifies forward single stepping, + -1 specifies backward single stepping, + >1: playback at speed/1000 of the normal speed, + <-1: reverse playback at (-speed/1000) of the normal speed. */ + __s32 speed; + __u32 format; + } start; + + struct { + __u32 data[16]; + } raw; + }; +}; +#endif + + +/* + * D A T A S E R V I C E S ( V B I ) + * + * Data services API by Michael Schimek + */ + +/* Raw VBI */ +struct v4l2_vbi_format { + __u32 sampling_rate; /* in 1 Hz */ + __u32 offset; + __u32 samples_per_line; + __u32 sample_format; /* V4L2_PIX_FMT_* */ + __s32 start[2]; + __u32 count[2]; + __u32 flags; /* V4L2_VBI_* */ + __u32 reserved[2]; /* must be zero */ +}; + +/* VBI flags */ +#define V4L2_VBI_UNSYNC (1 << 0) +#define V4L2_VBI_INTERLACED (1 << 1) + +/* Sliced VBI + * + * This implements is a proposal V4L2 API to allow SLICED VBI + * required for some hardware encoders. It should change without + * notice in the definitive implementation. + */ + +struct v4l2_sliced_vbi_format { + __u16 service_set; + /* service_lines[0][...] specifies lines 0-23 (1-23 used) of the first field + service_lines[1][...] specifies lines 0-23 (1-23 used) of the second field + (equals frame lines 313-336 for 625 line video + standards, 263-286 for 525 line standards) */ + __u16 service_lines[2][24]; + __u32 io_size; + __u32 reserved[2]; /* must be zero */ +}; + +/* Teletext World System Teletext + (WST), defined on ITU-R BT.653-2 */ +#define V4L2_SLICED_TELETEXT_B (0x0001) +/* Video Program System, defined on ETS 300 231*/ +#define V4L2_SLICED_VPS (0x0400) +/* Closed Caption, defined on EIA-608 */ +#define V4L2_SLICED_CAPTION_525 (0x1000) +/* Wide Screen System, defined on ITU-R BT1119.1 */ +#define V4L2_SLICED_WSS_625 (0x4000) + +#define V4L2_SLICED_VBI_525 (V4L2_SLICED_CAPTION_525) +#define V4L2_SLICED_VBI_625 (V4L2_SLICED_TELETEXT_B | V4L2_SLICED_VPS | V4L2_SLICED_WSS_625) + +struct v4l2_sliced_vbi_cap { + __u16 service_set; + /* service_lines[0][...] specifies lines 0-23 (1-23 used) of the first field + service_lines[1][...] specifies lines 0-23 (1-23 used) of the second field + (equals frame lines 313-336 for 625 line video + standards, 263-286 for 525 line standards) */ + __u16 service_lines[2][24]; + __u32 type; /* enum v4l2_buf_type */ + __u32 reserved[3]; /* must be 0 */ +}; + +struct v4l2_sliced_vbi_data { + __u32 id; + __u32 field; /* 0: first field, 1: second field */ + __u32 line; /* 1-23 */ + __u32 reserved; /* must be 0 */ + __u8 data[48]; +}; + +/* + * Sliced VBI data inserted into MPEG Streams + */ + +/* + * V4L2_MPEG_STREAM_VBI_FMT_IVTV: + * + * Structure of payload contained in an MPEG 2 Private Stream 1 PES Packet in an + * MPEG-2 Program Pack that contains V4L2_MPEG_STREAM_VBI_FMT_IVTV Sliced VBI + * data + * + * Note, the MPEG-2 Program Pack and Private Stream 1 PES packet header + * definitions are not included here. See the MPEG-2 specifications for details + * on these headers. + */ + +/* Line type IDs */ +#define V4L2_MPEG_VBI_IVTV_TELETEXT_B (1) +#define V4L2_MPEG_VBI_IVTV_CAPTION_525 (4) +#define V4L2_MPEG_VBI_IVTV_WSS_625 (5) +#define V4L2_MPEG_VBI_IVTV_VPS (7) + +struct v4l2_mpeg_vbi_itv0_line { + __u8 id; /* One of V4L2_MPEG_VBI_IVTV_* above */ + __u8 data[42]; /* Sliced VBI data for the line */ +} __attribute__ ((packed)); + +struct v4l2_mpeg_vbi_itv0 { + __le32 linemask[2]; /* Bitmasks of VBI service lines present */ + struct v4l2_mpeg_vbi_itv0_line line[35]; +} __attribute__ ((packed)); + +struct v4l2_mpeg_vbi_ITV0 { + struct v4l2_mpeg_vbi_itv0_line line[36]; +} __attribute__ ((packed)); + +#define V4L2_MPEG_VBI_IVTV_MAGIC0 "itv0" +#define V4L2_MPEG_VBI_IVTV_MAGIC1 "ITV0" + +struct v4l2_mpeg_vbi_fmt_ivtv { + __u8 magic[4]; + union { + struct v4l2_mpeg_vbi_itv0 itv0; + struct v4l2_mpeg_vbi_ITV0 ITV0; + }; +} __attribute__ ((packed)); + +/* + * A G G R E G A T E S T R U C T U R E S + */ + +/** + * struct v4l2_plane_pix_format - additional, per-plane format definition + * @sizeimage: maximum size in bytes required for data, for which + * this plane will be used + * @bytesperline: distance in bytes between the leftmost pixels in two + * adjacent lines + */ +struct v4l2_plane_pix_format { + __u32 sizeimage; + __u16 bytesperline; + __u16 reserved[7]; +} __attribute__ ((packed)); + +/** + * struct v4l2_pix_format_mplane - multiplanar format definition + * @width: image width in pixels + * @height: image height in pixels + * @pixelformat: little endian four character code (fourcc) + * @field: enum v4l2_field; field order (for interlaced video) + * @colorspace: enum v4l2_colorspace; supplemental to pixelformat + * @plane_fmt: per-plane information + * @num_planes: number of planes for this format + */ +struct v4l2_pix_format_mplane { + __u32 width; + __u32 height; + __u32 pixelformat; + __u32 field; + __u32 colorspace; + + struct v4l2_plane_pix_format plane_fmt[VIDEO_MAX_PLANES]; + __u8 num_planes; + __u8 reserved[11]; +} __attribute__ ((packed)); + +/** + * struct v4l2_format - stream data format + * @type: enum v4l2_buf_type; type of the data stream + * @pix: definition of an image format + * @pix_mp: definition of a multiplanar image format + * @win: definition of an overlaid image + * @vbi: raw VBI capture or output parameters + * @sliced: sliced VBI capture or output parameters + * @raw_data: placeholder for future extensions and custom formats + */ +struct v4l2_format { + __u32 type; + union { + struct v4l2_pix_format pix; /* V4L2_BUF_TYPE_VIDEO_CAPTURE */ + struct v4l2_pix_format_mplane pix_mp; /* V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE */ + struct v4l2_window win; /* V4L2_BUF_TYPE_VIDEO_OVERLAY */ + struct v4l2_vbi_format vbi; /* V4L2_BUF_TYPE_VBI_CAPTURE */ + struct v4l2_sliced_vbi_format sliced; /* V4L2_BUF_TYPE_SLICED_VBI_CAPTURE */ + __u8 raw_data[200]; /* user-defined */ + } fmt; +}; + +/* Stream type-dependent parameters + */ +struct v4l2_streamparm { + __u32 type; /* enum v4l2_buf_type */ + union { + struct v4l2_captureparm capture; + struct v4l2_outputparm output; + __u8 raw_data[200]; /* user-defined */ + } parm; +}; + +/* + * E V E N T S + */ + +#define V4L2_EVENT_ALL 0 +#define V4L2_EVENT_VSYNC 1 +#define V4L2_EVENT_EOS 2 +#define V4L2_EVENT_CTRL 3 +#define V4L2_EVENT_FRAME_SYNC 4 +#define V4L2_EVENT_PRIVATE_START 0x08000000 + +/* Payload for V4L2_EVENT_VSYNC */ +struct v4l2_event_vsync { + /* Can be V4L2_FIELD_ANY, _NONE, _TOP or _BOTTOM */ + __u8 field; +} __attribute__ ((packed)); + +/* Payload for V4L2_EVENT_CTRL */ +#define V4L2_EVENT_CTRL_CH_VALUE (1 << 0) +#define V4L2_EVENT_CTRL_CH_FLAGS (1 << 1) + +struct v4l2_event_ctrl { + __u32 changes; + __u32 type; + union { + __s32 value; + __s64 value64; + }; + __u32 flags; + __s32 minimum; + __s32 maximum; + __s32 step; + __s32 default_value; +}; + +struct v4l2_event_frame_sync { + __u32 frame_sequence; +}; + +struct v4l2_event { + __u32 type; + union { + struct v4l2_event_vsync vsync; + struct v4l2_event_ctrl ctrl; + struct v4l2_event_frame_sync frame_sync; + __u8 data[64]; + } u; + __u32 pending; + __u32 sequence; + struct timespec timestamp; + __u32 id; + __u32 reserved[8]; +}; + +#define V4L2_EVENT_SUB_FL_SEND_INITIAL (1 << 0) +#define V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK (1 << 1) + +struct v4l2_event_subscription { + __u32 type; + __u32 id; + __u32 flags; + __u32 reserved[5]; +}; + +/* + * A D V A N C E D D E B U G G I N G + * + * NOTE: EXPERIMENTAL API, NEVER RELY ON THIS IN APPLICATIONS! + * FOR DEBUGGING, TESTING AND INTERNAL USE ONLY! + */ + +/* VIDIOC_DBG_G_REGISTER and VIDIOC_DBG_S_REGISTER */ + +#define V4L2_CHIP_MATCH_HOST 0 /* Match against chip ID on host (0 for the host) */ +#define V4L2_CHIP_MATCH_I2C_DRIVER 1 /* Match against I2C driver name */ +#define V4L2_CHIP_MATCH_I2C_ADDR 2 /* Match against I2C 7-bit address */ +#define V4L2_CHIP_MATCH_AC97 3 /* Match against anciliary AC97 chip */ + +struct v4l2_dbg_match { + __u32 type; /* Match type */ + union { /* Match this chip, meaning determined by type */ + __u32 addr; + char name[32]; + }; +} __attribute__ ((packed)); + +struct v4l2_dbg_register { + struct v4l2_dbg_match match; + __u32 size; /* register size in bytes */ + __u64 reg; + __u64 val; +} __attribute__ ((packed)); + +/* VIDIOC_DBG_G_CHIP_IDENT */ +struct v4l2_dbg_chip_ident { + struct v4l2_dbg_match match; + __u32 ident; /* chip identifier as specified in <media/v4l2-chip-ident.h> */ + __u32 revision; /* chip revision, chip specific */ +} __attribute__ ((packed)); + +/** + * struct v4l2_create_buffers - VIDIOC_CREATE_BUFS argument + * @index: on return, index of the first created buffer + * @count: entry: number of requested buffers, + * return: number of created buffers + * @memory: enum v4l2_memory; buffer memory type + * @format: frame format, for which buffers are requested + * @reserved: future extensions + */ +struct v4l2_create_buffers { + __u32 index; + __u32 count; + __u32 memory; + struct v4l2_format format; + __u32 reserved[8]; +}; + +/* + * I O C T L C O D E S F O R V I D E O D E V I C E S + * + */ +#define VIDIOC_QUERYCAP _IOR('V', 0, struct v4l2_capability) +#define VIDIOC_RESERVED _IO('V', 1) +#define VIDIOC_ENUM_FMT _IOWR('V', 2, struct v4l2_fmtdesc) +#define VIDIOC_G_FMT _IOWR('V', 4, struct v4l2_format) +#define VIDIOC_S_FMT _IOWR('V', 5, struct v4l2_format) +#define VIDIOC_REQBUFS _IOWR('V', 8, struct v4l2_requestbuffers) +#define VIDIOC_QUERYBUF _IOWR('V', 9, struct v4l2_buffer) +#define VIDIOC_G_FBUF _IOR('V', 10, struct v4l2_framebuffer) +#define VIDIOC_S_FBUF _IOW('V', 11, struct v4l2_framebuffer) +#define VIDIOC_OVERLAY _IOW('V', 14, int) +#define VIDIOC_QBUF _IOWR('V', 15, struct v4l2_buffer) +#define VIDIOC_DQBUF _IOWR('V', 17, struct v4l2_buffer) +#define VIDIOC_STREAMON _IOW('V', 18, int) +#define VIDIOC_STREAMOFF _IOW('V', 19, int) +#define VIDIOC_G_PARM _IOWR('V', 21, struct v4l2_streamparm) +#define VIDIOC_S_PARM _IOWR('V', 22, struct v4l2_streamparm) +#define VIDIOC_G_STD _IOR('V', 23, v4l2_std_id) +#define VIDIOC_S_STD _IOW('V', 24, v4l2_std_id) +#define VIDIOC_ENUMSTD _IOWR('V', 25, struct v4l2_standard) +#define VIDIOC_ENUMINPUT _IOWR('V', 26, struct v4l2_input) +#define VIDIOC_G_CTRL _IOWR('V', 27, struct v4l2_control) +#define VIDIOC_S_CTRL _IOWR('V', 28, struct v4l2_control) +#define VIDIOC_G_TUNER _IOWR('V', 29, struct v4l2_tuner) +#define VIDIOC_S_TUNER _IOW('V', 30, struct v4l2_tuner) +#define VIDIOC_G_AUDIO _IOR('V', 33, struct v4l2_audio) +#define VIDIOC_S_AUDIO _IOW('V', 34, struct v4l2_audio) +#define VIDIOC_QUERYCTRL _IOWR('V', 36, struct v4l2_queryctrl) +#define VIDIOC_QUERYMENU _IOWR('V', 37, struct v4l2_querymenu) +#define VIDIOC_G_INPUT _IOR('V', 38, int) +#define VIDIOC_S_INPUT _IOWR('V', 39, int) +#define VIDIOC_G_OUTPUT _IOR('V', 46, int) +#define VIDIOC_S_OUTPUT _IOWR('V', 47, int) +#define VIDIOC_ENUMOUTPUT _IOWR('V', 48, struct v4l2_output) +#define VIDIOC_G_AUDOUT _IOR('V', 49, struct v4l2_audioout) +#define VIDIOC_S_AUDOUT _IOW('V', 50, struct v4l2_audioout) +#define VIDIOC_G_MODULATOR _IOWR('V', 54, struct v4l2_modulator) +#define VIDIOC_S_MODULATOR _IOW('V', 55, struct v4l2_modulator) +#define VIDIOC_G_FREQUENCY _IOWR('V', 56, struct v4l2_frequency) +#define VIDIOC_S_FREQUENCY _IOW('V', 57, struct v4l2_frequency) +#define VIDIOC_CROPCAP _IOWR('V', 58, struct v4l2_cropcap) +#define VIDIOC_G_CROP _IOWR('V', 59, struct v4l2_crop) +#define VIDIOC_S_CROP _IOW('V', 60, struct v4l2_crop) +#define VIDIOC_G_JPEGCOMP _IOR('V', 61, struct v4l2_jpegcompression) +#define VIDIOC_S_JPEGCOMP _IOW('V', 62, struct v4l2_jpegcompression) +#define VIDIOC_QUERYSTD _IOR('V', 63, v4l2_std_id) +#define VIDIOC_TRY_FMT _IOWR('V', 64, struct v4l2_format) +#define VIDIOC_ENUMAUDIO _IOWR('V', 65, struct v4l2_audio) +#define VIDIOC_ENUMAUDOUT _IOWR('V', 66, struct v4l2_audioout) +#define VIDIOC_G_PRIORITY _IOR('V', 67, __u32) /* enum v4l2_priority */ +#define VIDIOC_S_PRIORITY _IOW('V', 68, __u32) /* enum v4l2_priority */ +#define VIDIOC_G_SLICED_VBI_CAP _IOWR('V', 69, struct v4l2_sliced_vbi_cap) +#define VIDIOC_LOG_STATUS _IO('V', 70) +#define VIDIOC_G_EXT_CTRLS _IOWR('V', 71, struct v4l2_ext_controls) +#define VIDIOC_S_EXT_CTRLS _IOWR('V', 72, struct v4l2_ext_controls) +#define VIDIOC_TRY_EXT_CTRLS _IOWR('V', 73, struct v4l2_ext_controls) +#if 1 +#define VIDIOC_ENUM_FRAMESIZES _IOWR('V', 74, struct v4l2_frmsizeenum) +#define VIDIOC_ENUM_FRAMEINTERVALS _IOWR('V', 75, struct v4l2_frmivalenum) +#define VIDIOC_G_ENC_INDEX _IOR('V', 76, struct v4l2_enc_idx) +#define VIDIOC_ENCODER_CMD _IOWR('V', 77, struct v4l2_encoder_cmd) +#define VIDIOC_TRY_ENCODER_CMD _IOWR('V', 78, struct v4l2_encoder_cmd) +#endif + +#if 1 +/* Experimental, meant for debugging, testing and internal use. + Only implemented if CONFIG_VIDEO_ADV_DEBUG is defined. + You must be root to use these ioctls. Never use these in applications! */ +#define VIDIOC_DBG_S_REGISTER _IOW('V', 79, struct v4l2_dbg_register) +#define VIDIOC_DBG_G_REGISTER _IOWR('V', 80, struct v4l2_dbg_register) + +/* Experimental, meant for debugging, testing and internal use. + Never use this ioctl in applications! */ +#define VIDIOC_DBG_G_CHIP_IDENT _IOWR('V', 81, struct v4l2_dbg_chip_ident) +#endif + +#define VIDIOC_S_HW_FREQ_SEEK _IOW('V', 82, struct v4l2_hw_freq_seek) + +/* These four DV Preset ioctls are deprecated in favor of the DV Timings + ioctls. */ +#define VIDIOC_ENUM_DV_PRESETS _IOWR('V', 83, struct v4l2_dv_enum_preset) +#define VIDIOC_S_DV_PRESET _IOWR('V', 84, struct v4l2_dv_preset) +#define VIDIOC_G_DV_PRESET _IOWR('V', 85, struct v4l2_dv_preset) +#define VIDIOC_QUERY_DV_PRESET _IOR('V', 86, struct v4l2_dv_preset) +#define VIDIOC_S_DV_TIMINGS _IOWR('V', 87, struct v4l2_dv_timings) +#define VIDIOC_G_DV_TIMINGS _IOWR('V', 88, struct v4l2_dv_timings) +#define VIDIOC_DQEVENT _IOR('V', 89, struct v4l2_event) +#define VIDIOC_SUBSCRIBE_EVENT _IOW('V', 90, struct v4l2_event_subscription) +#define VIDIOC_UNSUBSCRIBE_EVENT _IOW('V', 91, struct v4l2_event_subscription) + +/* Experimental, the below two ioctls may change over the next couple of kernel + versions */ +#define VIDIOC_CREATE_BUFS _IOWR('V', 92, struct v4l2_create_buffers) +#define VIDIOC_PREPARE_BUF _IOWR('V', 93, struct v4l2_buffer) + +/* Experimental selection API */ +#define VIDIOC_G_SELECTION _IOWR('V', 94, struct v4l2_selection) +#define VIDIOC_S_SELECTION _IOWR('V', 95, struct v4l2_selection) + +/* Experimental, these two ioctls may change over the next couple of kernel + versions. */ +#define VIDIOC_DECODER_CMD _IOWR('V', 96, struct v4l2_decoder_cmd) +#define VIDIOC_TRY_DECODER_CMD _IOWR('V', 97, struct v4l2_decoder_cmd) + +/* Experimental, these three ioctls may change over the next couple of kernel + versions. */ +#define VIDIOC_ENUM_DV_TIMINGS _IOWR('V', 98, struct v4l2_enum_dv_timings) +#define VIDIOC_QUERY_DV_TIMINGS _IOR('V', 99, struct v4l2_dv_timings) +#define VIDIOC_DV_TIMINGS_CAP _IOWR('V', 100, struct v4l2_dv_timings_cap) + +/* Experimental, this ioctl may change over the next couple of kernel + versions. */ +#define VIDIOC_ENUM_FREQ_BANDS _IOWR('V', 101, struct v4l2_frequency_band) + +/* Reminder: when adding new ioctls please add support for them to + drivers/media/video/v4l2-compat-ioctl32.c as well! */ + +#define BASE_VIDIOC_PRIVATE 192 /* 192-255 are private */ + +#endif /* _UAPI__LINUX_VIDEODEV2_H */ diff --git a/include/linux/virtio_9p.h b/include/uapi/linux/virtio_9p.h index 277c4ad44e8..277c4ad44e8 100644 --- a/include/linux/virtio_9p.h +++ b/include/uapi/linux/virtio_9p.h diff --git a/include/linux/virtio_balloon.h b/include/uapi/linux/virtio_balloon.h index 652dc8bea92..652dc8bea92 100644 --- a/include/linux/virtio_balloon.h +++ b/include/uapi/linux/virtio_balloon.h diff --git a/include/linux/virtio_blk.h b/include/uapi/linux/virtio_blk.h index 6d8e61c4856..6d8e61c4856 100644 --- a/include/linux/virtio_blk.h +++ b/include/uapi/linux/virtio_blk.h diff --git a/include/uapi/linux/virtio_config.h b/include/uapi/linux/virtio_config.h new file mode 100644 index 00000000000..b7cda390fd0 --- /dev/null +++ b/include/uapi/linux/virtio_config.h @@ -0,0 +1,54 @@ +#ifndef _UAPI_LINUX_VIRTIO_CONFIG_H +#define _UAPI_LINUX_VIRTIO_CONFIG_H +/* This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so + * anyone can use the definitions to implement compatible drivers/servers. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of IBM nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. */ + +/* Virtio devices use a standardized configuration space to define their + * features and pass configuration information, but each implementation can + * store and access that space differently. */ +#include <linux/types.h> + +/* Status byte for guest to report progress, and synchronize features. */ +/* We have seen device and processed generic fields (VIRTIO_CONFIG_F_VIRTIO) */ +#define VIRTIO_CONFIG_S_ACKNOWLEDGE 1 +/* We have found a driver for the device. */ +#define VIRTIO_CONFIG_S_DRIVER 2 +/* Driver has used its parts of the config, and is happy */ +#define VIRTIO_CONFIG_S_DRIVER_OK 4 +/* We've given up on this device. */ +#define VIRTIO_CONFIG_S_FAILED 0x80 + +/* Some virtio feature bits (currently bits 28 through 31) are reserved for the + * transport being used (eg. virtio_ring), the rest are per-device feature + * bits. */ +#define VIRTIO_TRANSPORT_F_START 28 +#define VIRTIO_TRANSPORT_F_END 32 + +/* Do we get callbacks when the ring is completely used, even if we've + * suppressed them? */ +#define VIRTIO_F_NOTIFY_ON_EMPTY 24 + +#endif /* _UAPI_LINUX_VIRTIO_CONFIG_H */ diff --git a/include/uapi/linux/virtio_console.h b/include/uapi/linux/virtio_console.h new file mode 100644 index 00000000000..ee13ab6c361 --- /dev/null +++ b/include/uapi/linux/virtio_console.h @@ -0,0 +1,74 @@ +/* + * This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so + * anyone can use the definitions to implement compatible drivers/servers: + * + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of IBM nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * Copyright (C) Red Hat, Inc., 2009, 2010, 2011 + * Copyright (C) Amit Shah <amit.shah@redhat.com>, 2009, 2010, 2011 + */ +#ifndef _UAPI_LINUX_VIRTIO_CONSOLE_H +#define _UAPI_LINUX_VIRTIO_CONSOLE_H +#include <linux/types.h> +#include <linux/virtio_ids.h> +#include <linux/virtio_config.h> + +/* Feature bits */ +#define VIRTIO_CONSOLE_F_SIZE 0 /* Does host provide console size? */ +#define VIRTIO_CONSOLE_F_MULTIPORT 1 /* Does host provide multiple ports? */ + +#define VIRTIO_CONSOLE_BAD_ID (~(u32)0) + +struct virtio_console_config { + /* colums of the screens */ + __u16 cols; + /* rows of the screens */ + __u16 rows; + /* max. number of ports this device can hold */ + __u32 max_nr_ports; +} __attribute__((packed)); + +/* + * A message that's passed between the Host and the Guest for a + * particular port. + */ +struct virtio_console_control { + __u32 id; /* Port number */ + __u16 event; /* The kind of control event (see below) */ + __u16 value; /* Extra information for the key */ +}; + +/* Some events for control messages */ +#define VIRTIO_CONSOLE_DEVICE_READY 0 +#define VIRTIO_CONSOLE_PORT_ADD 1 +#define VIRTIO_CONSOLE_PORT_REMOVE 2 +#define VIRTIO_CONSOLE_PORT_READY 3 +#define VIRTIO_CONSOLE_CONSOLE_PORT 4 +#define VIRTIO_CONSOLE_RESIZE 5 +#define VIRTIO_CONSOLE_PORT_OPEN 6 +#define VIRTIO_CONSOLE_PORT_NAME 7 + + +#endif /* _UAPI_LINUX_VIRTIO_CONSOLE_H */ diff --git a/include/linux/virtio_ids.h b/include/uapi/linux/virtio_ids.h index 270fb22c581..270fb22c581 100644 --- a/include/linux/virtio_ids.h +++ b/include/uapi/linux/virtio_ids.h diff --git a/include/linux/virtio_net.h b/include/uapi/linux/virtio_net.h index 2470f541af5..2470f541af5 100644 --- a/include/linux/virtio_net.h +++ b/include/uapi/linux/virtio_net.h diff --git a/include/linux/virtio_pci.h b/include/uapi/linux/virtio_pci.h index ea66f3f60d6..ea66f3f60d6 100644 --- a/include/linux/virtio_pci.h +++ b/include/uapi/linux/virtio_pci.h diff --git a/include/uapi/linux/virtio_ring.h b/include/uapi/linux/virtio_ring.h new file mode 100644 index 00000000000..a99f9b7caa6 --- /dev/null +++ b/include/uapi/linux/virtio_ring.h @@ -0,0 +1,163 @@ +#ifndef _UAPI_LINUX_VIRTIO_RING_H +#define _UAPI_LINUX_VIRTIO_RING_H +/* An interface for efficient virtio implementation, currently for use by KVM + * and lguest, but hopefully others soon. Do NOT change this since it will + * break existing servers and clients. + * + * This header is BSD licensed so anyone can use the definitions to implement + * compatible drivers/servers. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of IBM nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * Copyright Rusty Russell IBM Corporation 2007. */ +#include <linux/types.h> + +/* This marks a buffer as continuing via the next field. */ +#define VRING_DESC_F_NEXT 1 +/* This marks a buffer as write-only (otherwise read-only). */ +#define VRING_DESC_F_WRITE 2 +/* This means the buffer contains a list of buffer descriptors. */ +#define VRING_DESC_F_INDIRECT 4 + +/* The Host uses this in used->flags to advise the Guest: don't kick me when + * you add a buffer. It's unreliable, so it's simply an optimization. Guest + * will still kick if it's out of buffers. */ +#define VRING_USED_F_NO_NOTIFY 1 +/* The Guest uses this in avail->flags to advise the Host: don't interrupt me + * when you consume a buffer. It's unreliable, so it's simply an + * optimization. */ +#define VRING_AVAIL_F_NO_INTERRUPT 1 + +/* We support indirect buffer descriptors */ +#define VIRTIO_RING_F_INDIRECT_DESC 28 + +/* The Guest publishes the used index for which it expects an interrupt + * at the end of the avail ring. Host should ignore the avail->flags field. */ +/* The Host publishes the avail index for which it expects a kick + * at the end of the used ring. Guest should ignore the used->flags field. */ +#define VIRTIO_RING_F_EVENT_IDX 29 + +/* Virtio ring descriptors: 16 bytes. These can chain together via "next". */ +struct vring_desc { + /* Address (guest-physical). */ + __u64 addr; + /* Length. */ + __u32 len; + /* The flags as indicated above. */ + __u16 flags; + /* We chain unused descriptors via this, too */ + __u16 next; +}; + +struct vring_avail { + __u16 flags; + __u16 idx; + __u16 ring[]; +}; + +/* u32 is used here for ids for padding reasons. */ +struct vring_used_elem { + /* Index of start of used descriptor chain. */ + __u32 id; + /* Total length of the descriptor chain which was used (written to) */ + __u32 len; +}; + +struct vring_used { + __u16 flags; + __u16 idx; + struct vring_used_elem ring[]; +}; + +struct vring { + unsigned int num; + + struct vring_desc *desc; + + struct vring_avail *avail; + + struct vring_used *used; +}; + +/* The standard layout for the ring is a continuous chunk of memory which looks + * like this. We assume num is a power of 2. + * + * struct vring + * { + * // The actual descriptors (16 bytes each) + * struct vring_desc desc[num]; + * + * // A ring of available descriptor heads with free-running index. + * __u16 avail_flags; + * __u16 avail_idx; + * __u16 available[num]; + * __u16 used_event_idx; + * + * // Padding to the next align boundary. + * char pad[]; + * + * // A ring of used descriptor heads with free-running index. + * __u16 used_flags; + * __u16 used_idx; + * struct vring_used_elem used[num]; + * __u16 avail_event_idx; + * }; + */ +/* We publish the used event index at the end of the available ring, and vice + * versa. They are at the end for backwards compatibility. */ +#define vring_used_event(vr) ((vr)->avail->ring[(vr)->num]) +#define vring_avail_event(vr) (*(__u16 *)&(vr)->used->ring[(vr)->num]) + +static inline void vring_init(struct vring *vr, unsigned int num, void *p, + unsigned long align) +{ + vr->num = num; + vr->desc = p; + vr->avail = p + num*sizeof(struct vring_desc); + vr->used = (void *)(((unsigned long)&vr->avail->ring[num] + sizeof(__u16) + + align-1) & ~(align - 1)); +} + +static inline unsigned vring_size(unsigned int num, unsigned long align) +{ + return ((sizeof(struct vring_desc) * num + sizeof(__u16) * (3 + num) + + align - 1) & ~(align - 1)) + + sizeof(__u16) * 3 + sizeof(struct vring_used_elem) * num; +} + +/* The following is used with USED_EVENT_IDX and AVAIL_EVENT_IDX */ +/* Assuming a given event_idx value from the other size, if + * we have just incremented index from old to new_idx, + * should we trigger an event? */ +static inline int vring_need_event(__u16 event_idx, __u16 new_idx, __u16 old) +{ + /* Note: Xen has similar logic for notification hold-off + * in include/xen/interface/io/ring.h with req_event and req_prod + * corresponding to event_idx + 1 and new_idx respectively. + * Note also that req_event and req_prod in Xen start at 1, + * event indexes in virtio start at 0. */ + return (__u16)(new_idx - event_idx - 1) < (__u16)(new_idx - old); +} + +#endif /* _UAPI_LINUX_VIRTIO_RING_H */ diff --git a/include/linux/virtio_rng.h b/include/uapi/linux/virtio_rng.h index c4d5de896f0..c4d5de896f0 100644 --- a/include/linux/virtio_rng.h +++ b/include/uapi/linux/virtio_rng.h diff --git a/include/uapi/linux/vt.h b/include/uapi/linux/vt.h new file mode 100644 index 00000000000..4b59a26799a --- /dev/null +++ b/include/uapi/linux/vt.h @@ -0,0 +1,90 @@ +#ifndef _UAPI_LINUX_VT_H +#define _UAPI_LINUX_VT_H + + +/* + * These constants are also useful for user-level apps (e.g., VC + * resizing). + */ +#define MIN_NR_CONSOLES 1 /* must be at least 1 */ +#define MAX_NR_CONSOLES 63 /* serial lines start at 64 */ +#define MAX_NR_USER_CONSOLES 63 /* must be root to allocate above this */ + /* Note: the ioctl VT_GETSTATE does not work for + consoles 16 and higher (since it returns a short) */ + +/* 0x56 is 'V', to avoid collision with termios and kd */ + +#define VT_OPENQRY 0x5600 /* find available vt */ + +struct vt_mode { + char mode; /* vt mode */ + char waitv; /* if set, hang on writes if not active */ + short relsig; /* signal to raise on release req */ + short acqsig; /* signal to raise on acquisition */ + short frsig; /* unused (set to 0) */ +}; +#define VT_GETMODE 0x5601 /* get mode of active vt */ +#define VT_SETMODE 0x5602 /* set mode of active vt */ +#define VT_AUTO 0x00 /* auto vt switching */ +#define VT_PROCESS 0x01 /* process controls switching */ +#define VT_ACKACQ 0x02 /* acknowledge switch */ + +struct vt_stat { + unsigned short v_active; /* active vt */ + unsigned short v_signal; /* signal to send */ + unsigned short v_state; /* vt bitmask */ +}; +#define VT_GETSTATE 0x5603 /* get global vt state info */ +#define VT_SENDSIG 0x5604 /* signal to send to bitmask of vts */ + +#define VT_RELDISP 0x5605 /* release display */ + +#define VT_ACTIVATE 0x5606 /* make vt active */ +#define VT_WAITACTIVE 0x5607 /* wait for vt active */ +#define VT_DISALLOCATE 0x5608 /* free memory associated to vt */ + +struct vt_sizes { + unsigned short v_rows; /* number of rows */ + unsigned short v_cols; /* number of columns */ + unsigned short v_scrollsize; /* number of lines of scrollback */ +}; +#define VT_RESIZE 0x5609 /* set kernel's idea of screensize */ + +struct vt_consize { + unsigned short v_rows; /* number of rows */ + unsigned short v_cols; /* number of columns */ + unsigned short v_vlin; /* number of pixel rows on screen */ + unsigned short v_clin; /* number of pixel rows per character */ + unsigned short v_vcol; /* number of pixel columns on screen */ + unsigned short v_ccol; /* number of pixel columns per character */ +}; +#define VT_RESIZEX 0x560A /* set kernel's idea of screensize + more */ +#define VT_LOCKSWITCH 0x560B /* disallow vt switching */ +#define VT_UNLOCKSWITCH 0x560C /* allow vt switching */ +#define VT_GETHIFONTMASK 0x560D /* return hi font mask */ + +struct vt_event { + unsigned int event; +#define VT_EVENT_SWITCH 0x0001 /* Console switch */ +#define VT_EVENT_BLANK 0x0002 /* Screen blank */ +#define VT_EVENT_UNBLANK 0x0004 /* Screen unblank */ +#define VT_EVENT_RESIZE 0x0008 /* Resize display */ +#define VT_MAX_EVENT 0x000F + unsigned int oldev; /* Old console */ + unsigned int newev; /* New console (if changing) */ + unsigned int pad[4]; /* Padding for expansion */ +}; + +#define VT_WAITEVENT 0x560E /* Wait for an event */ + +struct vt_setactivate { + unsigned int console; + struct vt_mode mode; +}; + +#define VT_SETACTIVATE 0x560F /* Activate and set the mode of a console */ + + +#define vt_get_kmsg_redirect() vt_kmsg_redirect(-1) + +#endif /* _UAPI_LINUX_VT_H */ diff --git a/include/uapi/linux/wait.h b/include/uapi/linux/wait.h new file mode 100644 index 00000000000..9393eead23e --- /dev/null +++ b/include/uapi/linux/wait.h @@ -0,0 +1,21 @@ +#ifndef _UAPI_LINUX_WAIT_H +#define _UAPI_LINUX_WAIT_H + +#define WNOHANG 0x00000001 +#define WUNTRACED 0x00000002 +#define WSTOPPED WUNTRACED +#define WEXITED 0x00000004 +#define WCONTINUED 0x00000008 +#define WNOWAIT 0x01000000 /* Don't reap, just poll status. */ + +#define __WNOTHREAD 0x20000000 /* Don't wait on children of other threads in this group */ +#define __WALL 0x40000000 /* Wait on all children, regardless of type */ +#define __WCLONE 0x80000000 /* Wait only on non-SIGCHLD children */ + +/* First argument to waitid: */ +#define P_ALL 0 +#define P_PID 1 +#define P_PGID 2 + + +#endif /* _UAPI_LINUX_WAIT_H */ diff --git a/include/uapi/linux/wanrouter.h b/include/uapi/linux/wanrouter.h new file mode 100644 index 00000000000..7617df2833d --- /dev/null +++ b/include/uapi/linux/wanrouter.h @@ -0,0 +1,452 @@ +/***************************************************************************** +* wanrouter.h Definitions for the WAN Multiprotocol Router Module. +* This module provides API and common services for WAN Link +* Drivers and is completely hardware-independent. +* +* Author: Nenad Corbic <ncorbic@sangoma.com> +* Gideon Hack +* Additions: Arnaldo Melo +* +* Copyright: (c) 1995-2000 Sangoma Technologies Inc. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License +* as published by the Free Software Foundation; either version +* 2 of the License, or (at your option) any later version. +* ============================================================================ +* Jul 21, 2000 Nenad Corbic Added WAN_FT1_READY State +* Feb 24, 2000 Nenad Corbic Added support for socket based x25api +* Jan 28, 2000 Nenad Corbic Added support for the ASYNC protocol. +* Oct 04, 1999 Nenad Corbic Updated for 2.1.0 release +* Jun 02, 1999 Gideon Hack Added support for the S514 adapter. +* May 23, 1999 Arnaldo Melo Added local_addr to wanif_conf_t +* WAN_DISCONNECTING state added +* Jul 20, 1998 David Fong Added Inverse ARP options to 'wanif_conf_t' +* Jun 12, 1998 David Fong Added Cisco HDLC support. +* Dec 16, 1997 Jaspreet Singh Moved 'enable_IPX' and 'network_number' to +* 'wanif_conf_t' +* Dec 05, 1997 Jaspreet Singh Added 'pap', 'chap' to 'wanif_conf_t' +* Added 'authenticator' to 'wan_ppp_conf_t' +* Nov 06, 1997 Jaspreet Singh Changed Router Driver version to 1.1 from 1.0 +* Oct 20, 1997 Jaspreet Singh Added 'cir','bc','be' and 'mc' to 'wanif_conf_t' +* Added 'enable_IPX' and 'network_number' to +* 'wan_device_t'. Also added defines for +* UDP PACKET TYPE, Interrupt test, critical values +* for RACE conditions. +* Oct 05, 1997 Jaspreet Singh Added 'dlci_num' and 'dlci[100]' to +* 'wan_fr_conf_t' to configure a list of dlci(s) +* for a NODE +* Jul 07, 1997 Jaspreet Singh Added 'ttl' to 'wandev_conf_t' & 'wan_device_t' +* May 29, 1997 Jaspreet Singh Added 'tx_int_enabled' to 'wan_device_t' +* May 21, 1997 Jaspreet Singh Added 'udp_port' to 'wan_device_t' +* Apr 25, 1997 Farhan Thawar Added 'udp_port' to 'wandev_conf_t' +* Jan 16, 1997 Gene Kozin router_devlist made public +* Jan 02, 1997 Gene Kozin Initial version (based on wanpipe.h). +*****************************************************************************/ + +#ifndef _UAPI_ROUTER_H +#define _UAPI_ROUTER_H + +#define ROUTER_NAME "wanrouter" /* in case we ever change it */ +#define ROUTER_VERSION 1 /* version number */ +#define ROUTER_RELEASE 1 /* release (minor version) number */ +#define ROUTER_IOCTL 'W' /* for IOCTL calls */ +#define ROUTER_MAGIC 0x524D4157L /* signature: 'WANR' reversed */ + +/* IOCTL codes for /proc/router/<device> entries (up to 255) */ +enum router_ioctls +{ + ROUTER_SETUP = ROUTER_IOCTL<<8, /* configure device */ + ROUTER_DOWN, /* shut down device */ + ROUTER_STAT, /* get device status */ + ROUTER_IFNEW, /* add interface */ + ROUTER_IFDEL, /* delete interface */ + ROUTER_IFSTAT, /* get interface status */ + ROUTER_USER = (ROUTER_IOCTL<<8)+16, /* driver-specific calls */ + ROUTER_USER_MAX = (ROUTER_IOCTL<<8)+31 +}; + +/* identifiers for displaying proc file data for dual port adapters */ +#define PROC_DATA_PORT_0 0x8000 /* the data is for port 0 */ +#define PROC_DATA_PORT_1 0x8001 /* the data is for port 1 */ + +/* NLPID for packet encapsulation (ISO/IEC TR 9577) */ +#define NLPID_IP 0xCC /* Internet Protocol Datagram */ +#define NLPID_SNAP 0x80 /* IEEE Subnetwork Access Protocol */ +#define NLPID_CLNP 0x81 /* ISO/IEC 8473 */ +#define NLPID_ESIS 0x82 /* ISO/IEC 9542 */ +#define NLPID_ISIS 0x83 /* ISO/IEC ISIS */ +#define NLPID_Q933 0x08 /* CCITT Q.933 */ + +/* Miscellaneous */ +#define WAN_IFNAME_SZ 15 /* max length of the interface name */ +#define WAN_DRVNAME_SZ 15 /* max length of the link driver name */ +#define WAN_ADDRESS_SZ 31 /* max length of the WAN media address */ +#define USED_BY_FIELD 8 /* max length of the used by field */ + +/* Defines for UDP PACKET TYPE */ +#define UDP_PTPIPE_TYPE 0x01 +#define UDP_FPIPE_TYPE 0x02 +#define UDP_CPIPE_TYPE 0x03 +#define UDP_DRVSTATS_TYPE 0x04 +#define UDP_INVALID_TYPE 0x05 + +/* Command return code */ +#define CMD_OK 0 /* normal firmware return code */ +#define CMD_TIMEOUT 0xFF /* firmware command timed out */ + +/* UDP Packet Management */ +#define UDP_PKT_FRM_STACK 0x00 +#define UDP_PKT_FRM_NETWORK 0x01 + +/* Maximum interrupt test counter */ +#define MAX_INTR_TEST_COUNTER 100 + +/* Critical Values for RACE conditions*/ +#define CRITICAL_IN_ISR 0xA1 +#define CRITICAL_INTR_HANDLED 0xB1 + +/****** Data Types **********************************************************/ + +/*---------------------------------------------------------------------------- + * X.25-specific link-level configuration. + */ +typedef struct wan_x25_conf +{ + unsigned lo_pvc; /* lowest permanent circuit number */ + unsigned hi_pvc; /* highest permanent circuit number */ + unsigned lo_svc; /* lowest switched circuit number */ + unsigned hi_svc; /* highest switched circuit number */ + unsigned hdlc_window; /* HDLC window size (1..7) */ + unsigned pkt_window; /* X.25 packet window size (1..7) */ + unsigned t1; /* HDLC timer T1, sec (1..30) */ + unsigned t2; /* HDLC timer T2, sec (0..29) */ + unsigned t4; /* HDLC supervisory frame timer = T4 * T1 */ + unsigned n2; /* HDLC retransmission limit (1..30) */ + unsigned t10_t20; /* X.25 RESTART timeout, sec (1..255) */ + unsigned t11_t21; /* X.25 CALL timeout, sec (1..255) */ + unsigned t12_t22; /* X.25 RESET timeout, sec (1..255) */ + unsigned t13_t23; /* X.25 CLEAR timeout, sec (1..255) */ + unsigned t16_t26; /* X.25 INTERRUPT timeout, sec (1..255) */ + unsigned t28; /* X.25 REGISTRATION timeout, sec (1..255) */ + unsigned r10_r20; /* RESTART retransmission limit (0..250) */ + unsigned r12_r22; /* RESET retransmission limit (0..250) */ + unsigned r13_r23; /* CLEAR retransmission limit (0..250) */ + unsigned ccitt_compat; /* compatibility mode: 1988/1984/1980 */ + unsigned x25_conf_opt; /* User defined x25 config optoins */ + unsigned char LAPB_hdlc_only; /* Run in HDLC only mode */ + unsigned char logging; /* Control connection logging */ + unsigned char oob_on_modem; /* Whether to send modem status to the user app */ +} wan_x25_conf_t; + +/*---------------------------------------------------------------------------- + * Frame relay specific link-level configuration. + */ +typedef struct wan_fr_conf +{ + unsigned signalling; /* local in-channel signalling type */ + unsigned t391; /* link integrity verification timer */ + unsigned t392; /* polling verification timer */ + unsigned n391; /* full status polling cycle counter */ + unsigned n392; /* error threshold counter */ + unsigned n393; /* monitored events counter */ + unsigned dlci_num; /* number of DLCs (access node) */ + unsigned dlci[100]; /* List of all DLCIs */ +} wan_fr_conf_t; + +/*---------------------------------------------------------------------------- + * PPP-specific link-level configuration. + */ +typedef struct wan_ppp_conf +{ + unsigned restart_tmr; /* restart timer */ + unsigned auth_rsrt_tmr; /* authentication timer */ + unsigned auth_wait_tmr; /* authentication timer */ + unsigned mdm_fail_tmr; /* modem failure timer */ + unsigned dtr_drop_tmr; /* DTR drop timer */ + unsigned connect_tmout; /* connection timeout */ + unsigned conf_retry; /* max. retry */ + unsigned term_retry; /* max. retry */ + unsigned fail_retry; /* max. retry */ + unsigned auth_retry; /* max. retry */ + unsigned auth_options; /* authentication opt. */ + unsigned ip_options; /* IP options */ + char authenticator; /* AUTHENTICATOR or not */ + char ip_mode; /* Static/Host/Peer */ +} wan_ppp_conf_t; + +/*---------------------------------------------------------------------------- + * CHDLC-specific link-level configuration. + */ +typedef struct wan_chdlc_conf +{ + unsigned char ignore_dcd; /* Protocol options: */ + unsigned char ignore_cts; /* Ignore these to determine */ + unsigned char ignore_keepalive; /* link status (Yes or No) */ + unsigned char hdlc_streaming; /* hdlc_streaming mode (Y/N) */ + unsigned char receive_only; /* no transmit buffering (Y/N) */ + unsigned keepalive_tx_tmr; /* transmit keepalive timer */ + unsigned keepalive_rx_tmr; /* receive keepalive timer */ + unsigned keepalive_err_margin; /* keepalive_error_tolerance */ + unsigned slarp_timer; /* SLARP request timer */ +} wan_chdlc_conf_t; + + +/*---------------------------------------------------------------------------- + * WAN device configuration. Passed to ROUTER_SETUP IOCTL. + */ +typedef struct wandev_conf +{ + unsigned magic; /* magic number (for verification) */ + unsigned config_id; /* configuration structure identifier */ + /****** hardware configuration ******/ + unsigned ioport; /* adapter I/O port base */ + unsigned long maddr; /* dual-port memory address */ + unsigned msize; /* dual-port memory size */ + int irq; /* interrupt request level */ + int dma; /* DMA request level */ + char S514_CPU_no[1]; /* S514 PCI adapter CPU number ('A' or 'B') */ + unsigned PCI_slot_no; /* S514 PCI adapter slot number */ + char auto_pci_cfg; /* S515 PCI automatic slot detection */ + char comm_port; /* Communication Port (PRI=0, SEC=1) */ + unsigned bps; /* data transfer rate */ + unsigned mtu; /* maximum transmit unit size */ + unsigned udp_port; /* UDP port for management */ + unsigned char ttl; /* Time To Live for UDP security */ + unsigned char ft1; /* FT1 Configurator Option */ + char interface; /* RS-232/V.35, etc. */ + char clocking; /* external/internal */ + char line_coding; /* NRZ/NRZI/FM0/FM1, etc. */ + char station; /* DTE/DCE, primary/secondary, etc. */ + char connection; /* permanent/switched/on-demand */ + char read_mode; /* read mode: Polling or interrupt */ + char receive_only; /* disable tx buffers */ + char tty; /* Create a fake tty device */ + unsigned tty_major; /* Major number for wanpipe tty device */ + unsigned tty_minor; /* Minor number for wanpipe tty device */ + unsigned tty_mode; /* TTY operation mode SYNC or ASYNC */ + char backup; /* Backup Mode */ + unsigned hw_opt[4]; /* other hardware options */ + unsigned reserved[4]; + /****** arbitrary data ***************/ + unsigned data_size; /* data buffer size */ + void* data; /* data buffer, e.g. firmware */ + union /****** protocol-specific ************/ + { + wan_x25_conf_t x25; /* X.25 configuration */ + wan_ppp_conf_t ppp; /* PPP configuration */ + wan_fr_conf_t fr; /* frame relay configuration */ + wan_chdlc_conf_t chdlc; /* Cisco HDLC configuration */ + } u; +} wandev_conf_t; + +/* 'config_id' definitions */ +#define WANCONFIG_X25 101 /* X.25 link */ +#define WANCONFIG_FR 102 /* frame relay link */ +#define WANCONFIG_PPP 103 /* synchronous PPP link */ +#define WANCONFIG_CHDLC 104 /* Cisco HDLC Link */ +#define WANCONFIG_BSC 105 /* BiSync Streaming */ +#define WANCONFIG_HDLC 106 /* HDLC Support */ +#define WANCONFIG_MPPP 107 /* Multi Port PPP over RAW CHDLC */ + +/* + * Configuration options defines. + */ +/* general options */ +#define WANOPT_OFF 0 +#define WANOPT_ON 1 +#define WANOPT_NO 0 +#define WANOPT_YES 1 + +/* intercace options */ +#define WANOPT_RS232 0 +#define WANOPT_V35 1 + +/* data encoding options */ +#define WANOPT_NRZ 0 +#define WANOPT_NRZI 1 +#define WANOPT_FM0 2 +#define WANOPT_FM1 3 + +/* link type options */ +#define WANOPT_POINTTOPOINT 0 /* RTS always active */ +#define WANOPT_MULTIDROP 1 /* RTS is active when transmitting */ + +/* clocking options */ +#define WANOPT_EXTERNAL 0 +#define WANOPT_INTERNAL 1 + +/* station options */ +#define WANOPT_DTE 0 +#define WANOPT_DCE 1 +#define WANOPT_CPE 0 +#define WANOPT_NODE 1 +#define WANOPT_SECONDARY 0 +#define WANOPT_PRIMARY 1 + +/* connection options */ +#define WANOPT_PERMANENT 0 /* DTR always active */ +#define WANOPT_SWITCHED 1 /* use DTR to setup link (dial-up) */ +#define WANOPT_ONDEMAND 2 /* activate DTR only before sending */ + +/* frame relay in-channel signalling */ +#define WANOPT_FR_ANSI 1 /* ANSI T1.617 Annex D */ +#define WANOPT_FR_Q933 2 /* ITU Q.933A */ +#define WANOPT_FR_LMI 3 /* LMI */ + +/* PPP IP Mode Options */ +#define WANOPT_PPP_STATIC 0 +#define WANOPT_PPP_HOST 1 +#define WANOPT_PPP_PEER 2 + +/* ASY Mode Options */ +#define WANOPT_ONE 1 +#define WANOPT_TWO 2 +#define WANOPT_ONE_AND_HALF 3 + +#define WANOPT_NONE 0 +#define WANOPT_ODD 1 +#define WANOPT_EVEN 2 + +/* CHDLC Protocol Options */ +/* DF Commented out for now. + +#define WANOPT_CHDLC_NO_DCD IGNORE_DCD_FOR_LINK_STAT +#define WANOPT_CHDLC_NO_CTS IGNORE_CTS_FOR_LINK_STAT +#define WANOPT_CHDLC_NO_KEEPALIVE IGNORE_KPALV_FOR_LINK_STAT +*/ + +/* Port options */ +#define WANOPT_PRI 0 +#define WANOPT_SEC 1 +/* read mode */ +#define WANOPT_INTR 0 +#define WANOPT_POLL 1 + + +#define WANOPT_TTY_SYNC 0 +#define WANOPT_TTY_ASYNC 1 +/*---------------------------------------------------------------------------- + * WAN Link Status Info (for ROUTER_STAT IOCTL). + */ +typedef struct wandev_stat +{ + unsigned state; /* link state */ + unsigned ndev; /* number of configured interfaces */ + + /* link/interface configuration */ + unsigned connection; /* permanent/switched/on-demand */ + unsigned media_type; /* Frame relay/PPP/X.25/SDLC, etc. */ + unsigned mtu; /* max. transmit unit for this device */ + + /* physical level statistics */ + unsigned modem_status; /* modem status */ + unsigned rx_frames; /* received frames count */ + unsigned rx_overruns; /* receiver overrun error count */ + unsigned rx_crc_err; /* receive CRC error count */ + unsigned rx_aborts; /* received aborted frames count */ + unsigned rx_bad_length; /* unexpetedly long/short frames count */ + unsigned rx_dropped; /* frames discarded at device level */ + unsigned tx_frames; /* transmitted frames count */ + unsigned tx_underruns; /* aborted transmissions (underruns) count */ + unsigned tx_timeouts; /* transmission timeouts */ + unsigned tx_rejects; /* other transmit errors */ + + /* media level statistics */ + unsigned rx_bad_format; /* frames with invalid format */ + unsigned rx_bad_addr; /* frames with invalid media address */ + unsigned tx_retries; /* frames re-transmitted */ + unsigned reserved[16]; /* reserved for future use */ +} wandev_stat_t; + +/* 'state' defines */ +enum wan_states +{ + WAN_UNCONFIGURED, /* link/channel is not configured */ + WAN_DISCONNECTED, /* link/channel is disconnected */ + WAN_CONNECTING, /* connection is in progress */ + WAN_CONNECTED, /* link/channel is operational */ + WAN_LIMIT, /* for verification only */ + WAN_DUALPORT, /* for Dual Port cards */ + WAN_DISCONNECTING, + WAN_FT1_READY /* FT1 Configurator Ready */ +}; + +enum { + WAN_LOCAL_IP, + WAN_POINTOPOINT_IP, + WAN_NETMASK_IP, + WAN_BROADCAST_IP +}; + +/* 'modem_status' masks */ +#define WAN_MODEM_CTS 0x0001 /* CTS line active */ +#define WAN_MODEM_DCD 0x0002 /* DCD line active */ +#define WAN_MODEM_DTR 0x0010 /* DTR line active */ +#define WAN_MODEM_RTS 0x0020 /* RTS line active */ + +/*---------------------------------------------------------------------------- + * WAN interface (logical channel) configuration (for ROUTER_IFNEW IOCTL). + */ +typedef struct wanif_conf +{ + unsigned magic; /* magic number */ + unsigned config_id; /* configuration identifier */ + char name[WAN_IFNAME_SZ+1]; /* interface name, ASCIIZ */ + char addr[WAN_ADDRESS_SZ+1]; /* media address, ASCIIZ */ + char usedby[USED_BY_FIELD]; /* used by API or WANPIPE */ + unsigned idle_timeout; /* sec, before disconnecting */ + unsigned hold_timeout; /* sec, before re-connecting */ + unsigned cir; /* Committed Information Rate fwd,bwd*/ + unsigned bc; /* Committed Burst Size fwd, bwd */ + unsigned be; /* Excess Burst Size fwd, bwd */ + unsigned char enable_IPX; /* Enable or Disable IPX */ + unsigned char inarp; /* Send Inverse ARP requests Y/N */ + unsigned inarp_interval; /* sec, between InARP requests */ + unsigned long network_number; /* Network Number for IPX */ + char mc; /* Multicast on or off */ + char local_addr[WAN_ADDRESS_SZ+1];/* local media address, ASCIIZ */ + unsigned char port; /* board port */ + unsigned char protocol; /* prococol used in this channel (TCPOX25 or X25) */ + char pap; /* PAP enabled or disabled */ + char chap; /* CHAP enabled or disabled */ + unsigned char userid[511]; /* List of User Id */ + unsigned char passwd[511]; /* List of passwords */ + unsigned char sysname[31]; /* Name of the system */ + unsigned char ignore_dcd; /* Protocol options: */ + unsigned char ignore_cts; /* Ignore these to determine */ + unsigned char ignore_keepalive; /* link status (Yes or No) */ + unsigned char hdlc_streaming; /* Hdlc streaming mode (Y/N) */ + unsigned keepalive_tx_tmr; /* transmit keepalive timer */ + unsigned keepalive_rx_tmr; /* receive keepalive timer */ + unsigned keepalive_err_margin; /* keepalive_error_tolerance */ + unsigned slarp_timer; /* SLARP request timer */ + unsigned char ttl; /* Time To Live for UDP security */ + char interface; /* RS-232/V.35, etc. */ + char clocking; /* external/internal */ + unsigned bps; /* data transfer rate */ + unsigned mtu; /* maximum transmit unit size */ + unsigned char if_down; /* brind down interface when disconnected */ + unsigned char gateway; /* Is this interface a gateway */ + unsigned char true_if_encoding; /* Set the dev->type to true board protocol */ + + unsigned char asy_data_trans; /* async API options */ + unsigned char rts_hs_for_receive; /* async Protocol options */ + unsigned char xon_xoff_hs_for_receive; + unsigned char xon_xoff_hs_for_transmit; + unsigned char dcd_hs_for_transmit; + unsigned char cts_hs_for_transmit; + unsigned char async_mode; + unsigned tx_bits_per_char; + unsigned rx_bits_per_char; + unsigned stop_bits; + unsigned char parity; + unsigned break_timer; + unsigned inter_char_timer; + unsigned rx_complete_length; + unsigned xon_char; + unsigned xoff_char; + unsigned char receive_only; /* no transmit buffering (Y/N) */ +} wanif_conf_t; + +#endif /* _UAPI_ROUTER_H */ diff --git a/include/uapi/linux/watchdog.h b/include/uapi/linux/watchdog.h new file mode 100644 index 00000000000..2babe72870b --- /dev/null +++ b/include/uapi/linux/watchdog.h @@ -0,0 +1,57 @@ +/* + * Generic watchdog defines. Derived from.. + * + * Berkshire PC Watchdog Defines + * by Ken Hollis <khollis@bitgate.com> + * + */ + +#ifndef _UAPI_LINUX_WATCHDOG_H +#define _UAPI_LINUX_WATCHDOG_H + +#include <linux/ioctl.h> +#include <linux/types.h> + +#define WATCHDOG_IOCTL_BASE 'W' + +struct watchdog_info { + __u32 options; /* Options the card/driver supports */ + __u32 firmware_version; /* Firmware version of the card */ + __u8 identity[32]; /* Identity of the board */ +}; + +#define WDIOC_GETSUPPORT _IOR(WATCHDOG_IOCTL_BASE, 0, struct watchdog_info) +#define WDIOC_GETSTATUS _IOR(WATCHDOG_IOCTL_BASE, 1, int) +#define WDIOC_GETBOOTSTATUS _IOR(WATCHDOG_IOCTL_BASE, 2, int) +#define WDIOC_GETTEMP _IOR(WATCHDOG_IOCTL_BASE, 3, int) +#define WDIOC_SETOPTIONS _IOR(WATCHDOG_IOCTL_BASE, 4, int) +#define WDIOC_KEEPALIVE _IOR(WATCHDOG_IOCTL_BASE, 5, int) +#define WDIOC_SETTIMEOUT _IOWR(WATCHDOG_IOCTL_BASE, 6, int) +#define WDIOC_GETTIMEOUT _IOR(WATCHDOG_IOCTL_BASE, 7, int) +#define WDIOC_SETPRETIMEOUT _IOWR(WATCHDOG_IOCTL_BASE, 8, int) +#define WDIOC_GETPRETIMEOUT _IOR(WATCHDOG_IOCTL_BASE, 9, int) +#define WDIOC_GETTIMELEFT _IOR(WATCHDOG_IOCTL_BASE, 10, int) + +#define WDIOF_UNKNOWN -1 /* Unknown flag error */ +#define WDIOS_UNKNOWN -1 /* Unknown status error */ + +#define WDIOF_OVERHEAT 0x0001 /* Reset due to CPU overheat */ +#define WDIOF_FANFAULT 0x0002 /* Fan failed */ +#define WDIOF_EXTERN1 0x0004 /* External relay 1 */ +#define WDIOF_EXTERN2 0x0008 /* External relay 2 */ +#define WDIOF_POWERUNDER 0x0010 /* Power bad/power fault */ +#define WDIOF_CARDRESET 0x0020 /* Card previously reset the CPU */ +#define WDIOF_POWEROVER 0x0040 /* Power over voltage */ +#define WDIOF_SETTIMEOUT 0x0080 /* Set timeout (in seconds) */ +#define WDIOF_MAGICCLOSE 0x0100 /* Supports magic close char */ +#define WDIOF_PRETIMEOUT 0x0200 /* Pretimeout (in seconds), get/set */ +#define WDIOF_ALARMONLY 0x0400 /* Watchdog triggers a management or + other external alarm not a reboot */ +#define WDIOF_KEEPALIVEPING 0x8000 /* Keep alive ping reply */ + +#define WDIOS_DISABLECARD 0x0001 /* Turn off the watchdog timer */ +#define WDIOS_ENABLECARD 0x0002 /* Turn on the watchdog timer */ +#define WDIOS_TEMPPANIC 0x0004 /* Kernel panic on temperature trip */ + + +#endif /* _UAPI_LINUX_WATCHDOG_H */ diff --git a/include/linux/wimax.h b/include/uapi/linux/wimax.h index 9f6b77af2f6..9f6b77af2f6 100644 --- a/include/linux/wimax.h +++ b/include/uapi/linux/wimax.h diff --git a/include/uapi/linux/wimax/Kbuild b/include/uapi/linux/wimax/Kbuild index aafaa5aa54d..1c97be49971 100644 --- a/include/uapi/linux/wimax/Kbuild +++ b/include/uapi/linux/wimax/Kbuild @@ -1 +1,2 @@ # UAPI Header export list +header-y += i2400m.h diff --git a/include/linux/wimax/i2400m.h b/include/uapi/linux/wimax/i2400m.h index 62d35615356..62d35615356 100644 --- a/include/linux/wimax/i2400m.h +++ b/include/uapi/linux/wimax/i2400m.h diff --git a/include/uapi/linux/wireless.h b/include/uapi/linux/wireless.h new file mode 100644 index 00000000000..c1592e3e403 --- /dev/null +++ b/include/uapi/linux/wireless.h @@ -0,0 +1,1128 @@ +/* + * This file define a set of standard wireless extensions + * + * Version : 22 16.3.07 + * + * Authors : Jean Tourrilhes - HPL - <jt@hpl.hp.com> + * Copyright (c) 1997-2007 Jean Tourrilhes, All Rights Reserved. + */ + +#ifndef _UAPI_LINUX_WIRELESS_H +#define _UAPI_LINUX_WIRELESS_H + +/************************** DOCUMENTATION **************************/ +/* + * Initial APIs (1996 -> onward) : + * ----------------------------- + * Basically, the wireless extensions are for now a set of standard ioctl + * call + /proc/net/wireless + * + * The entry /proc/net/wireless give statistics and information on the + * driver. + * This is better than having each driver having its entry because + * its centralised and we may remove the driver module safely. + * + * Ioctl are used to configure the driver and issue commands. This is + * better than command line options of insmod because we may want to + * change dynamically (while the driver is running) some parameters. + * + * The ioctl mechanimsm are copied from standard devices ioctl. + * We have the list of command plus a structure descibing the + * data exchanged... + * Note that to add these ioctl, I was obliged to modify : + * # net/core/dev.c (two place + add include) + * # net/ipv4/af_inet.c (one place + add include) + * + * /proc/net/wireless is a copy of /proc/net/dev. + * We have a structure for data passed from the driver to /proc/net/wireless + * Too add this, I've modified : + * # net/core/dev.c (two other places) + * # include/linux/netdevice.h (one place) + * # include/linux/proc_fs.h (one place) + * + * New driver API (2002 -> onward) : + * ------------------------------- + * This file is only concerned with the user space API and common definitions. + * The new driver API is defined and documented in : + * # include/net/iw_handler.h + * + * Note as well that /proc/net/wireless implementation has now moved in : + * # net/core/wireless.c + * + * Wireless Events (2002 -> onward) : + * -------------------------------- + * Events are defined at the end of this file, and implemented in : + * # net/core/wireless.c + * + * Other comments : + * -------------- + * Do not add here things that are redundant with other mechanisms + * (drivers init, ifconfig, /proc/net/dev, ...) and with are not + * wireless specific. + * + * These wireless extensions are not magic : each driver has to provide + * support for them... + * + * IMPORTANT NOTE : As everything in the kernel, this is very much a + * work in progress. Contact me if you have ideas of improvements... + */ + +/***************************** INCLUDES *****************************/ + +#include <linux/types.h> /* for __u* and __s* typedefs */ +#include <linux/socket.h> /* for "struct sockaddr" et al */ +#include <linux/if.h> /* for IFNAMSIZ and co... */ + +/***************************** VERSION *****************************/ +/* + * This constant is used to know the availability of the wireless + * extensions and to know which version of wireless extensions it is + * (there is some stuff that will be added in the future...) + * I just plan to increment with each new version. + */ +#define WIRELESS_EXT 22 + +/* + * Changes : + * + * V2 to V3 + * -------- + * Alan Cox start some incompatibles changes. I've integrated a bit more. + * - Encryption renamed to Encode to avoid US regulation problems + * - Frequency changed from float to struct to avoid problems on old 386 + * + * V3 to V4 + * -------- + * - Add sensitivity + * + * V4 to V5 + * -------- + * - Missing encoding definitions in range + * - Access points stuff + * + * V5 to V6 + * -------- + * - 802.11 support (ESSID ioctls) + * + * V6 to V7 + * -------- + * - define IW_ESSID_MAX_SIZE and IW_MAX_AP + * + * V7 to V8 + * -------- + * - Changed my e-mail address + * - More 802.11 support (nickname, rate, rts, frag) + * - List index in frequencies + * + * V8 to V9 + * -------- + * - Support for 'mode of operation' (ad-hoc, managed...) + * - Support for unicast and multicast power saving + * - Change encoding to support larger tokens (>64 bits) + * - Updated iw_params (disable, flags) and use it for NWID + * - Extracted iw_point from iwreq for clarity + * + * V9 to V10 + * --------- + * - Add PM capability to range structure + * - Add PM modifier : MAX/MIN/RELATIVE + * - Add encoding option : IW_ENCODE_NOKEY + * - Add TxPower ioctls (work like TxRate) + * + * V10 to V11 + * ---------- + * - Add WE version in range (help backward/forward compatibility) + * - Add retry ioctls (work like PM) + * + * V11 to V12 + * ---------- + * - Add SIOCSIWSTATS to get /proc/net/wireless programatically + * - Add DEV PRIVATE IOCTL to avoid collisions in SIOCDEVPRIVATE space + * - Add new statistics (frag, retry, beacon) + * - Add average quality (for user space calibration) + * + * V12 to V13 + * ---------- + * - Document creation of new driver API. + * - Extract union iwreq_data from struct iwreq (for new driver API). + * - Rename SIOCSIWNAME as SIOCSIWCOMMIT + * + * V13 to V14 + * ---------- + * - Wireless Events support : define struct iw_event + * - Define additional specific event numbers + * - Add "addr" and "param" fields in union iwreq_data + * - AP scanning stuff (SIOCSIWSCAN and friends) + * + * V14 to V15 + * ---------- + * - Add IW_PRIV_TYPE_ADDR for struct sockaddr private arg + * - Make struct iw_freq signed (both m & e), add explicit padding + * - Add IWEVCUSTOM for driver specific event/scanning token + * - Add IW_MAX_GET_SPY for driver returning a lot of addresses + * - Add IW_TXPOW_RANGE for range of Tx Powers + * - Add IWEVREGISTERED & IWEVEXPIRED events for Access Points + * - Add IW_MODE_MONITOR for passive monitor + * + * V15 to V16 + * ---------- + * - Increase the number of bitrates in iw_range to 32 (for 802.11g) + * - Increase the number of frequencies in iw_range to 32 (for 802.11b+a) + * - Reshuffle struct iw_range for increases, add filler + * - Increase IW_MAX_AP to 64 for driver returning a lot of addresses + * - Remove IW_MAX_GET_SPY because conflict with enhanced spy support + * - Add SIOCSIWTHRSPY/SIOCGIWTHRSPY and "struct iw_thrspy" + * - Add IW_ENCODE_TEMP and iw_range->encoding_login_index + * + * V16 to V17 + * ---------- + * - Add flags to frequency -> auto/fixed + * - Document (struct iw_quality *)->updated, add new flags (INVALID) + * - Wireless Event capability in struct iw_range + * - Add support for relative TxPower (yick !) + * + * V17 to V18 (From Jouni Malinen <j@w1.fi>) + * ---------- + * - Add support for WPA/WPA2 + * - Add extended encoding configuration (SIOCSIWENCODEEXT and + * SIOCGIWENCODEEXT) + * - Add SIOCSIWGENIE/SIOCGIWGENIE + * - Add SIOCSIWMLME + * - Add SIOCSIWPMKSA + * - Add struct iw_range bit field for supported encoding capabilities + * - Add optional scan request parameters for SIOCSIWSCAN + * - Add SIOCSIWAUTH/SIOCGIWAUTH for setting authentication and WPA + * related parameters (extensible up to 4096 parameter values) + * - Add wireless events: IWEVGENIE, IWEVMICHAELMICFAILURE, + * IWEVASSOCREQIE, IWEVASSOCRESPIE, IWEVPMKIDCAND + * + * V18 to V19 + * ---------- + * - Remove (struct iw_point *)->pointer from events and streams + * - Remove header includes to help user space + * - Increase IW_ENCODING_TOKEN_MAX from 32 to 64 + * - Add IW_QUAL_ALL_UPDATED and IW_QUAL_ALL_INVALID macros + * - Add explicit flag to tell stats are in dBm : IW_QUAL_DBM + * - Add IW_IOCTL_IDX() and IW_EVENT_IDX() macros + * + * V19 to V20 + * ---------- + * - RtNetlink requests support (SET/GET) + * + * V20 to V21 + * ---------- + * - Remove (struct net_device *)->get_wireless_stats() + * - Change length in ESSID and NICK to strlen() instead of strlen()+1 + * - Add IW_RETRY_SHORT/IW_RETRY_LONG retry modifiers + * - Power/Retry relative values no longer * 100000 + * - Add explicit flag to tell stats are in 802.11k RCPI : IW_QUAL_RCPI + * + * V21 to V22 + * ---------- + * - Prevent leaking of kernel space in stream on 64 bits. + */ + +/**************************** CONSTANTS ****************************/ + +/* -------------------------- IOCTL LIST -------------------------- */ + +/* Wireless Identification */ +#define SIOCSIWCOMMIT 0x8B00 /* Commit pending changes to driver */ +#define SIOCGIWNAME 0x8B01 /* get name == wireless protocol */ +/* SIOCGIWNAME is used to verify the presence of Wireless Extensions. + * Common values : "IEEE 802.11-DS", "IEEE 802.11-FH", "IEEE 802.11b"... + * Don't put the name of your driver there, it's useless. */ + +/* Basic operations */ +#define SIOCSIWNWID 0x8B02 /* set network id (pre-802.11) */ +#define SIOCGIWNWID 0x8B03 /* get network id (the cell) */ +#define SIOCSIWFREQ 0x8B04 /* set channel/frequency (Hz) */ +#define SIOCGIWFREQ 0x8B05 /* get channel/frequency (Hz) */ +#define SIOCSIWMODE 0x8B06 /* set operation mode */ +#define SIOCGIWMODE 0x8B07 /* get operation mode */ +#define SIOCSIWSENS 0x8B08 /* set sensitivity (dBm) */ +#define SIOCGIWSENS 0x8B09 /* get sensitivity (dBm) */ + +/* Informative stuff */ +#define SIOCSIWRANGE 0x8B0A /* Unused */ +#define SIOCGIWRANGE 0x8B0B /* Get range of parameters */ +#define SIOCSIWPRIV 0x8B0C /* Unused */ +#define SIOCGIWPRIV 0x8B0D /* get private ioctl interface info */ +#define SIOCSIWSTATS 0x8B0E /* Unused */ +#define SIOCGIWSTATS 0x8B0F /* Get /proc/net/wireless stats */ +/* SIOCGIWSTATS is strictly used between user space and the kernel, and + * is never passed to the driver (i.e. the driver will never see it). */ + +/* Spy support (statistics per MAC address - used for Mobile IP support) */ +#define SIOCSIWSPY 0x8B10 /* set spy addresses */ +#define SIOCGIWSPY 0x8B11 /* get spy info (quality of link) */ +#define SIOCSIWTHRSPY 0x8B12 /* set spy threshold (spy event) */ +#define SIOCGIWTHRSPY 0x8B13 /* get spy threshold */ + +/* Access Point manipulation */ +#define SIOCSIWAP 0x8B14 /* set access point MAC addresses */ +#define SIOCGIWAP 0x8B15 /* get access point MAC addresses */ +#define SIOCGIWAPLIST 0x8B17 /* Deprecated in favor of scanning */ +#define SIOCSIWSCAN 0x8B18 /* trigger scanning (list cells) */ +#define SIOCGIWSCAN 0x8B19 /* get scanning results */ + +/* 802.11 specific support */ +#define SIOCSIWESSID 0x8B1A /* set ESSID (network name) */ +#define SIOCGIWESSID 0x8B1B /* get ESSID */ +#define SIOCSIWNICKN 0x8B1C /* set node name/nickname */ +#define SIOCGIWNICKN 0x8B1D /* get node name/nickname */ +/* As the ESSID and NICKN are strings up to 32 bytes long, it doesn't fit + * within the 'iwreq' structure, so we need to use the 'data' member to + * point to a string in user space, like it is done for RANGE... */ + +/* Other parameters useful in 802.11 and some other devices */ +#define SIOCSIWRATE 0x8B20 /* set default bit rate (bps) */ +#define SIOCGIWRATE 0x8B21 /* get default bit rate (bps) */ +#define SIOCSIWRTS 0x8B22 /* set RTS/CTS threshold (bytes) */ +#define SIOCGIWRTS 0x8B23 /* get RTS/CTS threshold (bytes) */ +#define SIOCSIWFRAG 0x8B24 /* set fragmentation thr (bytes) */ +#define SIOCGIWFRAG 0x8B25 /* get fragmentation thr (bytes) */ +#define SIOCSIWTXPOW 0x8B26 /* set transmit power (dBm) */ +#define SIOCGIWTXPOW 0x8B27 /* get transmit power (dBm) */ +#define SIOCSIWRETRY 0x8B28 /* set retry limits and lifetime */ +#define SIOCGIWRETRY 0x8B29 /* get retry limits and lifetime */ + +/* Encoding stuff (scrambling, hardware security, WEP...) */ +#define SIOCSIWENCODE 0x8B2A /* set encoding token & mode */ +#define SIOCGIWENCODE 0x8B2B /* get encoding token & mode */ +/* Power saving stuff (power management, unicast and multicast) */ +#define SIOCSIWPOWER 0x8B2C /* set Power Management settings */ +#define SIOCGIWPOWER 0x8B2D /* get Power Management settings */ + +/* WPA : Generic IEEE 802.11 informatiom element (e.g., for WPA/RSN/WMM). + * This ioctl uses struct iw_point and data buffer that includes IE id and len + * fields. More than one IE may be included in the request. Setting the generic + * IE to empty buffer (len=0) removes the generic IE from the driver. Drivers + * are allowed to generate their own WPA/RSN IEs, but in these cases, drivers + * are required to report the used IE as a wireless event, e.g., when + * associating with an AP. */ +#define SIOCSIWGENIE 0x8B30 /* set generic IE */ +#define SIOCGIWGENIE 0x8B31 /* get generic IE */ + +/* WPA : IEEE 802.11 MLME requests */ +#define SIOCSIWMLME 0x8B16 /* request MLME operation; uses + * struct iw_mlme */ +/* WPA : Authentication mode parameters */ +#define SIOCSIWAUTH 0x8B32 /* set authentication mode params */ +#define SIOCGIWAUTH 0x8B33 /* get authentication mode params */ + +/* WPA : Extended version of encoding configuration */ +#define SIOCSIWENCODEEXT 0x8B34 /* set encoding token & mode */ +#define SIOCGIWENCODEEXT 0x8B35 /* get encoding token & mode */ + +/* WPA2 : PMKSA cache management */ +#define SIOCSIWPMKSA 0x8B36 /* PMKSA cache operation */ + +/* -------------------- DEV PRIVATE IOCTL LIST -------------------- */ + +/* These 32 ioctl are wireless device private, for 16 commands. + * Each driver is free to use them for whatever purpose it chooses, + * however the driver *must* export the description of those ioctls + * with SIOCGIWPRIV and *must* use arguments as defined below. + * If you don't follow those rules, DaveM is going to hate you (reason : + * it make mixed 32/64bit operation impossible). + */ +#define SIOCIWFIRSTPRIV 0x8BE0 +#define SIOCIWLASTPRIV 0x8BFF +/* Previously, we were using SIOCDEVPRIVATE, but we now have our + * separate range because of collisions with other tools such as + * 'mii-tool'. + * We now have 32 commands, so a bit more space ;-). + * Also, all 'even' commands are only usable by root and don't return the + * content of ifr/iwr to user (but you are not obliged to use the set/get + * convention, just use every other two command). More details in iwpriv.c. + * And I repeat : you are not forced to use them with iwpriv, but you + * must be compliant with it. + */ + +/* ------------------------- IOCTL STUFF ------------------------- */ + +/* The first and the last (range) */ +#define SIOCIWFIRST 0x8B00 +#define SIOCIWLAST SIOCIWLASTPRIV /* 0x8BFF */ +#define IW_IOCTL_IDX(cmd) ((cmd) - SIOCIWFIRST) +#define IW_HANDLER(id, func) \ + [IW_IOCTL_IDX(id)] = func + +/* Odd : get (world access), even : set (root access) */ +#define IW_IS_SET(cmd) (!((cmd) & 0x1)) +#define IW_IS_GET(cmd) ((cmd) & 0x1) + +/* ----------------------- WIRELESS EVENTS ----------------------- */ +/* Those are *NOT* ioctls, do not issue request on them !!! */ +/* Most events use the same identifier as ioctl requests */ + +#define IWEVTXDROP 0x8C00 /* Packet dropped to excessive retry */ +#define IWEVQUAL 0x8C01 /* Quality part of statistics (scan) */ +#define IWEVCUSTOM 0x8C02 /* Driver specific ascii string */ +#define IWEVREGISTERED 0x8C03 /* Discovered a new node (AP mode) */ +#define IWEVEXPIRED 0x8C04 /* Expired a node (AP mode) */ +#define IWEVGENIE 0x8C05 /* Generic IE (WPA, RSN, WMM, ..) + * (scan results); This includes id and + * length fields. One IWEVGENIE may + * contain more than one IE. Scan + * results may contain one or more + * IWEVGENIE events. */ +#define IWEVMICHAELMICFAILURE 0x8C06 /* Michael MIC failure + * (struct iw_michaelmicfailure) + */ +#define IWEVASSOCREQIE 0x8C07 /* IEs used in (Re)Association Request. + * The data includes id and length + * fields and may contain more than one + * IE. This event is required in + * Managed mode if the driver + * generates its own WPA/RSN IE. This + * should be sent just before + * IWEVREGISTERED event for the + * association. */ +#define IWEVASSOCRESPIE 0x8C08 /* IEs used in (Re)Association + * Response. The data includes id and + * length fields and may contain more + * than one IE. This may be sent + * between IWEVASSOCREQIE and + * IWEVREGISTERED events for the + * association. */ +#define IWEVPMKIDCAND 0x8C09 /* PMKID candidate for RSN + * pre-authentication + * (struct iw_pmkid_cand) */ + +#define IWEVFIRST 0x8C00 +#define IW_EVENT_IDX(cmd) ((cmd) - IWEVFIRST) + +/* ------------------------- PRIVATE INFO ------------------------- */ +/* + * The following is used with SIOCGIWPRIV. It allow a driver to define + * the interface (name, type of data) for its private ioctl. + * Privates ioctl are SIOCIWFIRSTPRIV -> SIOCIWLASTPRIV + */ + +#define IW_PRIV_TYPE_MASK 0x7000 /* Type of arguments */ +#define IW_PRIV_TYPE_NONE 0x0000 +#define IW_PRIV_TYPE_BYTE 0x1000 /* Char as number */ +#define IW_PRIV_TYPE_CHAR 0x2000 /* Char as character */ +#define IW_PRIV_TYPE_INT 0x4000 /* 32 bits int */ +#define IW_PRIV_TYPE_FLOAT 0x5000 /* struct iw_freq */ +#define IW_PRIV_TYPE_ADDR 0x6000 /* struct sockaddr */ + +#define IW_PRIV_SIZE_FIXED 0x0800 /* Variable or fixed number of args */ + +#define IW_PRIV_SIZE_MASK 0x07FF /* Max number of those args */ + +/* + * Note : if the number of args is fixed and the size < 16 octets, + * instead of passing a pointer we will put args in the iwreq struct... + */ + +/* ----------------------- OTHER CONSTANTS ----------------------- */ + +/* Maximum frequencies in the range struct */ +#define IW_MAX_FREQUENCIES 32 +/* Note : if you have something like 80 frequencies, + * don't increase this constant and don't fill the frequency list. + * The user will be able to set by channel anyway... */ + +/* Maximum bit rates in the range struct */ +#define IW_MAX_BITRATES 32 + +/* Maximum tx powers in the range struct */ +#define IW_MAX_TXPOWER 8 +/* Note : if you more than 8 TXPowers, just set the max and min or + * a few of them in the struct iw_range. */ + +/* Maximum of address that you may set with SPY */ +#define IW_MAX_SPY 8 + +/* Maximum of address that you may get in the + list of access points in range */ +#define IW_MAX_AP 64 + +/* Maximum size of the ESSID and NICKN strings */ +#define IW_ESSID_MAX_SIZE 32 + +/* Modes of operation */ +#define IW_MODE_AUTO 0 /* Let the driver decides */ +#define IW_MODE_ADHOC 1 /* Single cell network */ +#define IW_MODE_INFRA 2 /* Multi cell network, roaming, ... */ +#define IW_MODE_MASTER 3 /* Synchronisation master or Access Point */ +#define IW_MODE_REPEAT 4 /* Wireless Repeater (forwarder) */ +#define IW_MODE_SECOND 5 /* Secondary master/repeater (backup) */ +#define IW_MODE_MONITOR 6 /* Passive monitor (listen only) */ +#define IW_MODE_MESH 7 /* Mesh (IEEE 802.11s) network */ + +/* Statistics flags (bitmask in updated) */ +#define IW_QUAL_QUAL_UPDATED 0x01 /* Value was updated since last read */ +#define IW_QUAL_LEVEL_UPDATED 0x02 +#define IW_QUAL_NOISE_UPDATED 0x04 +#define IW_QUAL_ALL_UPDATED 0x07 +#define IW_QUAL_DBM 0x08 /* Level + Noise are dBm */ +#define IW_QUAL_QUAL_INVALID 0x10 /* Driver doesn't provide value */ +#define IW_QUAL_LEVEL_INVALID 0x20 +#define IW_QUAL_NOISE_INVALID 0x40 +#define IW_QUAL_RCPI 0x80 /* Level + Noise are 802.11k RCPI */ +#define IW_QUAL_ALL_INVALID 0x70 + +/* Frequency flags */ +#define IW_FREQ_AUTO 0x00 /* Let the driver decides */ +#define IW_FREQ_FIXED 0x01 /* Force a specific value */ + +/* Maximum number of size of encoding token available + * they are listed in the range structure */ +#define IW_MAX_ENCODING_SIZES 8 + +/* Maximum size of the encoding token in bytes */ +#define IW_ENCODING_TOKEN_MAX 64 /* 512 bits (for now) */ + +/* Flags for encoding (along with the token) */ +#define IW_ENCODE_INDEX 0x00FF /* Token index (if needed) */ +#define IW_ENCODE_FLAGS 0xFF00 /* Flags defined below */ +#define IW_ENCODE_MODE 0xF000 /* Modes defined below */ +#define IW_ENCODE_DISABLED 0x8000 /* Encoding disabled */ +#define IW_ENCODE_ENABLED 0x0000 /* Encoding enabled */ +#define IW_ENCODE_RESTRICTED 0x4000 /* Refuse non-encoded packets */ +#define IW_ENCODE_OPEN 0x2000 /* Accept non-encoded packets */ +#define IW_ENCODE_NOKEY 0x0800 /* Key is write only, so not present */ +#define IW_ENCODE_TEMP 0x0400 /* Temporary key */ + +/* Power management flags available (along with the value, if any) */ +#define IW_POWER_ON 0x0000 /* No details... */ +#define IW_POWER_TYPE 0xF000 /* Type of parameter */ +#define IW_POWER_PERIOD 0x1000 /* Value is a period/duration of */ +#define IW_POWER_TIMEOUT 0x2000 /* Value is a timeout (to go asleep) */ +#define IW_POWER_MODE 0x0F00 /* Power Management mode */ +#define IW_POWER_UNICAST_R 0x0100 /* Receive only unicast messages */ +#define IW_POWER_MULTICAST_R 0x0200 /* Receive only multicast messages */ +#define IW_POWER_ALL_R 0x0300 /* Receive all messages though PM */ +#define IW_POWER_FORCE_S 0x0400 /* Force PM procedure for sending unicast */ +#define IW_POWER_REPEATER 0x0800 /* Repeat broadcast messages in PM period */ +#define IW_POWER_MODIFIER 0x000F /* Modify a parameter */ +#define IW_POWER_MIN 0x0001 /* Value is a minimum */ +#define IW_POWER_MAX 0x0002 /* Value is a maximum */ +#define IW_POWER_RELATIVE 0x0004 /* Value is not in seconds/ms/us */ + +/* Transmit Power flags available */ +#define IW_TXPOW_TYPE 0x00FF /* Type of value */ +#define IW_TXPOW_DBM 0x0000 /* Value is in dBm */ +#define IW_TXPOW_MWATT 0x0001 /* Value is in mW */ +#define IW_TXPOW_RELATIVE 0x0002 /* Value is in arbitrary units */ +#define IW_TXPOW_RANGE 0x1000 /* Range of value between min/max */ + +/* Retry limits and lifetime flags available */ +#define IW_RETRY_ON 0x0000 /* No details... */ +#define IW_RETRY_TYPE 0xF000 /* Type of parameter */ +#define IW_RETRY_LIMIT 0x1000 /* Maximum number of retries*/ +#define IW_RETRY_LIFETIME 0x2000 /* Maximum duration of retries in us */ +#define IW_RETRY_MODIFIER 0x00FF /* Modify a parameter */ +#define IW_RETRY_MIN 0x0001 /* Value is a minimum */ +#define IW_RETRY_MAX 0x0002 /* Value is a maximum */ +#define IW_RETRY_RELATIVE 0x0004 /* Value is not in seconds/ms/us */ +#define IW_RETRY_SHORT 0x0010 /* Value is for short packets */ +#define IW_RETRY_LONG 0x0020 /* Value is for long packets */ + +/* Scanning request flags */ +#define IW_SCAN_DEFAULT 0x0000 /* Default scan of the driver */ +#define IW_SCAN_ALL_ESSID 0x0001 /* Scan all ESSIDs */ +#define IW_SCAN_THIS_ESSID 0x0002 /* Scan only this ESSID */ +#define IW_SCAN_ALL_FREQ 0x0004 /* Scan all Frequencies */ +#define IW_SCAN_THIS_FREQ 0x0008 /* Scan only this Frequency */ +#define IW_SCAN_ALL_MODE 0x0010 /* Scan all Modes */ +#define IW_SCAN_THIS_MODE 0x0020 /* Scan only this Mode */ +#define IW_SCAN_ALL_RATE 0x0040 /* Scan all Bit-Rates */ +#define IW_SCAN_THIS_RATE 0x0080 /* Scan only this Bit-Rate */ +/* struct iw_scan_req scan_type */ +#define IW_SCAN_TYPE_ACTIVE 0 +#define IW_SCAN_TYPE_PASSIVE 1 +/* Maximum size of returned data */ +#define IW_SCAN_MAX_DATA 4096 /* In bytes */ + +/* Scan capability flags - in (struct iw_range *)->scan_capa */ +#define IW_SCAN_CAPA_NONE 0x00 +#define IW_SCAN_CAPA_ESSID 0x01 +#define IW_SCAN_CAPA_BSSID 0x02 +#define IW_SCAN_CAPA_CHANNEL 0x04 +#define IW_SCAN_CAPA_MODE 0x08 +#define IW_SCAN_CAPA_RATE 0x10 +#define IW_SCAN_CAPA_TYPE 0x20 +#define IW_SCAN_CAPA_TIME 0x40 + +/* Max number of char in custom event - use multiple of them if needed */ +#define IW_CUSTOM_MAX 256 /* In bytes */ + +/* Generic information element */ +#define IW_GENERIC_IE_MAX 1024 + +/* MLME requests (SIOCSIWMLME / struct iw_mlme) */ +#define IW_MLME_DEAUTH 0 +#define IW_MLME_DISASSOC 1 +#define IW_MLME_AUTH 2 +#define IW_MLME_ASSOC 3 + +/* SIOCSIWAUTH/SIOCGIWAUTH struct iw_param flags */ +#define IW_AUTH_INDEX 0x0FFF +#define IW_AUTH_FLAGS 0xF000 +/* SIOCSIWAUTH/SIOCGIWAUTH parameters (0 .. 4095) + * (IW_AUTH_INDEX mask in struct iw_param flags; this is the index of the + * parameter that is being set/get to; value will be read/written to + * struct iw_param value field) */ +#define IW_AUTH_WPA_VERSION 0 +#define IW_AUTH_CIPHER_PAIRWISE 1 +#define IW_AUTH_CIPHER_GROUP 2 +#define IW_AUTH_KEY_MGMT 3 +#define IW_AUTH_TKIP_COUNTERMEASURES 4 +#define IW_AUTH_DROP_UNENCRYPTED 5 +#define IW_AUTH_80211_AUTH_ALG 6 +#define IW_AUTH_WPA_ENABLED 7 +#define IW_AUTH_RX_UNENCRYPTED_EAPOL 8 +#define IW_AUTH_ROAMING_CONTROL 9 +#define IW_AUTH_PRIVACY_INVOKED 10 +#define IW_AUTH_CIPHER_GROUP_MGMT 11 +#define IW_AUTH_MFP 12 + +/* IW_AUTH_WPA_VERSION values (bit field) */ +#define IW_AUTH_WPA_VERSION_DISABLED 0x00000001 +#define IW_AUTH_WPA_VERSION_WPA 0x00000002 +#define IW_AUTH_WPA_VERSION_WPA2 0x00000004 + +/* IW_AUTH_PAIRWISE_CIPHER, IW_AUTH_GROUP_CIPHER, and IW_AUTH_CIPHER_GROUP_MGMT + * values (bit field) */ +#define IW_AUTH_CIPHER_NONE 0x00000001 +#define IW_AUTH_CIPHER_WEP40 0x00000002 +#define IW_AUTH_CIPHER_TKIP 0x00000004 +#define IW_AUTH_CIPHER_CCMP 0x00000008 +#define IW_AUTH_CIPHER_WEP104 0x00000010 +#define IW_AUTH_CIPHER_AES_CMAC 0x00000020 + +/* IW_AUTH_KEY_MGMT values (bit field) */ +#define IW_AUTH_KEY_MGMT_802_1X 1 +#define IW_AUTH_KEY_MGMT_PSK 2 + +/* IW_AUTH_80211_AUTH_ALG values (bit field) */ +#define IW_AUTH_ALG_OPEN_SYSTEM 0x00000001 +#define IW_AUTH_ALG_SHARED_KEY 0x00000002 +#define IW_AUTH_ALG_LEAP 0x00000004 + +/* IW_AUTH_ROAMING_CONTROL values */ +#define IW_AUTH_ROAMING_ENABLE 0 /* driver/firmware based roaming */ +#define IW_AUTH_ROAMING_DISABLE 1 /* user space program used for roaming + * control */ + +/* IW_AUTH_MFP (management frame protection) values */ +#define IW_AUTH_MFP_DISABLED 0 /* MFP disabled */ +#define IW_AUTH_MFP_OPTIONAL 1 /* MFP optional */ +#define IW_AUTH_MFP_REQUIRED 2 /* MFP required */ + +/* SIOCSIWENCODEEXT definitions */ +#define IW_ENCODE_SEQ_MAX_SIZE 8 +/* struct iw_encode_ext ->alg */ +#define IW_ENCODE_ALG_NONE 0 +#define IW_ENCODE_ALG_WEP 1 +#define IW_ENCODE_ALG_TKIP 2 +#define IW_ENCODE_ALG_CCMP 3 +#define IW_ENCODE_ALG_PMK 4 +#define IW_ENCODE_ALG_AES_CMAC 5 +/* struct iw_encode_ext ->ext_flags */ +#define IW_ENCODE_EXT_TX_SEQ_VALID 0x00000001 +#define IW_ENCODE_EXT_RX_SEQ_VALID 0x00000002 +#define IW_ENCODE_EXT_GROUP_KEY 0x00000004 +#define IW_ENCODE_EXT_SET_TX_KEY 0x00000008 + +/* IWEVMICHAELMICFAILURE : struct iw_michaelmicfailure ->flags */ +#define IW_MICFAILURE_KEY_ID 0x00000003 /* Key ID 0..3 */ +#define IW_MICFAILURE_GROUP 0x00000004 +#define IW_MICFAILURE_PAIRWISE 0x00000008 +#define IW_MICFAILURE_STAKEY 0x00000010 +#define IW_MICFAILURE_COUNT 0x00000060 /* 1 or 2 (0 = count not supported) + */ + +/* Bit field values for enc_capa in struct iw_range */ +#define IW_ENC_CAPA_WPA 0x00000001 +#define IW_ENC_CAPA_WPA2 0x00000002 +#define IW_ENC_CAPA_CIPHER_TKIP 0x00000004 +#define IW_ENC_CAPA_CIPHER_CCMP 0x00000008 +#define IW_ENC_CAPA_4WAY_HANDSHAKE 0x00000010 + +/* Event capability macros - in (struct iw_range *)->event_capa + * Because we have more than 32 possible events, we use an array of + * 32 bit bitmasks. Note : 32 bits = 0x20 = 2^5. */ +#define IW_EVENT_CAPA_BASE(cmd) ((cmd >= SIOCIWFIRSTPRIV) ? \ + (cmd - SIOCIWFIRSTPRIV + 0x60) : \ + (cmd - SIOCIWFIRST)) +#define IW_EVENT_CAPA_INDEX(cmd) (IW_EVENT_CAPA_BASE(cmd) >> 5) +#define IW_EVENT_CAPA_MASK(cmd) (1 << (IW_EVENT_CAPA_BASE(cmd) & 0x1F)) +/* Event capability constants - event autogenerated by the kernel + * This list is valid for most 802.11 devices, customise as needed... */ +#define IW_EVENT_CAPA_K_0 (IW_EVENT_CAPA_MASK(0x8B04) | \ + IW_EVENT_CAPA_MASK(0x8B06) | \ + IW_EVENT_CAPA_MASK(0x8B1A)) +#define IW_EVENT_CAPA_K_1 (IW_EVENT_CAPA_MASK(0x8B2A)) +/* "Easy" macro to set events in iw_range (less efficient) */ +#define IW_EVENT_CAPA_SET(event_capa, cmd) (event_capa[IW_EVENT_CAPA_INDEX(cmd)] |= IW_EVENT_CAPA_MASK(cmd)) +#define IW_EVENT_CAPA_SET_KERNEL(event_capa) {event_capa[0] |= IW_EVENT_CAPA_K_0; event_capa[1] |= IW_EVENT_CAPA_K_1; } + + +/****************************** TYPES ******************************/ + +/* --------------------------- SUBTYPES --------------------------- */ +/* + * Generic format for most parameters that fit in an int + */ +struct iw_param +{ + __s32 value; /* The value of the parameter itself */ + __u8 fixed; /* Hardware should not use auto select */ + __u8 disabled; /* Disable the feature */ + __u16 flags; /* Various specifc flags (if any) */ +}; + +/* + * For all data larger than 16 octets, we need to use a + * pointer to memory allocated in user space. + */ +struct iw_point +{ + void __user *pointer; /* Pointer to the data (in user space) */ + __u16 length; /* number of fields or size in bytes */ + __u16 flags; /* Optional params */ +}; + + +/* + * A frequency + * For numbers lower than 10^9, we encode the number in 'm' and + * set 'e' to 0 + * For number greater than 10^9, we divide it by the lowest power + * of 10 to get 'm' lower than 10^9, with 'm'= f / (10^'e')... + * The power of 10 is in 'e', the result of the division is in 'm'. + */ +struct iw_freq +{ + __s32 m; /* Mantissa */ + __s16 e; /* Exponent */ + __u8 i; /* List index (when in range struct) */ + __u8 flags; /* Flags (fixed/auto) */ +}; + +/* + * Quality of the link + */ +struct iw_quality +{ + __u8 qual; /* link quality (%retries, SNR, + %missed beacons or better...) */ + __u8 level; /* signal level (dBm) */ + __u8 noise; /* noise level (dBm) */ + __u8 updated; /* Flags to know if updated */ +}; + +/* + * Packet discarded in the wireless adapter due to + * "wireless" specific problems... + * Note : the list of counter and statistics in net_device_stats + * is already pretty exhaustive, and you should use that first. + * This is only additional stats... + */ +struct iw_discarded +{ + __u32 nwid; /* Rx : Wrong nwid/essid */ + __u32 code; /* Rx : Unable to code/decode (WEP) */ + __u32 fragment; /* Rx : Can't perform MAC reassembly */ + __u32 retries; /* Tx : Max MAC retries num reached */ + __u32 misc; /* Others cases */ +}; + +/* + * Packet/Time period missed in the wireless adapter due to + * "wireless" specific problems... + */ +struct iw_missed +{ + __u32 beacon; /* Missed beacons/superframe */ +}; + +/* + * Quality range (for spy threshold) + */ +struct iw_thrspy +{ + struct sockaddr addr; /* Source address (hw/mac) */ + struct iw_quality qual; /* Quality of the link */ + struct iw_quality low; /* Low threshold */ + struct iw_quality high; /* High threshold */ +}; + +/* + * Optional data for scan request + * + * Note: these optional parameters are controlling parameters for the + * scanning behavior, these do not apply to getting scan results + * (SIOCGIWSCAN). Drivers are expected to keep a local BSS table and + * provide a merged results with all BSSes even if the previous scan + * request limited scanning to a subset, e.g., by specifying an SSID. + * Especially, scan results are required to include an entry for the + * current BSS if the driver is in Managed mode and associated with an AP. + */ +struct iw_scan_req +{ + __u8 scan_type; /* IW_SCAN_TYPE_{ACTIVE,PASSIVE} */ + __u8 essid_len; + __u8 num_channels; /* num entries in channel_list; + * 0 = scan all allowed channels */ + __u8 flags; /* reserved as padding; use zero, this may + * be used in the future for adding flags + * to request different scan behavior */ + struct sockaddr bssid; /* ff:ff:ff:ff:ff:ff for broadcast BSSID or + * individual address of a specific BSS */ + + /* + * Use this ESSID if IW_SCAN_THIS_ESSID flag is used instead of using + * the current ESSID. This allows scan requests for specific ESSID + * without having to change the current ESSID and potentially breaking + * the current association. + */ + __u8 essid[IW_ESSID_MAX_SIZE]; + + /* + * Optional parameters for changing the default scanning behavior. + * These are based on the MLME-SCAN.request from IEEE Std 802.11. + * TU is 1.024 ms. If these are set to 0, driver is expected to use + * reasonable default values. min_channel_time defines the time that + * will be used to wait for the first reply on each channel. If no + * replies are received, next channel will be scanned after this. If + * replies are received, total time waited on the channel is defined by + * max_channel_time. + */ + __u32 min_channel_time; /* in TU */ + __u32 max_channel_time; /* in TU */ + + struct iw_freq channel_list[IW_MAX_FREQUENCIES]; +}; + +/* ------------------------- WPA SUPPORT ------------------------- */ + +/* + * Extended data structure for get/set encoding (this is used with + * SIOCSIWENCODEEXT/SIOCGIWENCODEEXT. struct iw_point and IW_ENCODE_* + * flags are used in the same way as with SIOCSIWENCODE/SIOCGIWENCODE and + * only the data contents changes (key data -> this structure, including + * key data). + * + * If the new key is the first group key, it will be set as the default + * TX key. Otherwise, default TX key index is only changed if + * IW_ENCODE_EXT_SET_TX_KEY flag is set. + * + * Key will be changed with SIOCSIWENCODEEXT in all cases except for + * special "change TX key index" operation which is indicated by setting + * key_len = 0 and ext_flags |= IW_ENCODE_EXT_SET_TX_KEY. + * + * tx_seq/rx_seq are only used when respective + * IW_ENCODE_EXT_{TX,RX}_SEQ_VALID flag is set in ext_flags. Normal + * TKIP/CCMP operation is to set RX seq with SIOCSIWENCODEEXT and start + * TX seq from zero whenever key is changed. SIOCGIWENCODEEXT is normally + * used only by an Authenticator (AP or an IBSS station) to get the + * current TX sequence number. Using TX_SEQ_VALID for SIOCSIWENCODEEXT and + * RX_SEQ_VALID for SIOCGIWENCODEEXT are optional, but can be useful for + * debugging/testing. + */ +struct iw_encode_ext +{ + __u32 ext_flags; /* IW_ENCODE_EXT_* */ + __u8 tx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */ + __u8 rx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */ + struct sockaddr addr; /* ff:ff:ff:ff:ff:ff for broadcast/multicast + * (group) keys or unicast address for + * individual keys */ + __u16 alg; /* IW_ENCODE_ALG_* */ + __u16 key_len; + __u8 key[0]; +}; + +/* SIOCSIWMLME data */ +struct iw_mlme +{ + __u16 cmd; /* IW_MLME_* */ + __u16 reason_code; + struct sockaddr addr; +}; + +/* SIOCSIWPMKSA data */ +#define IW_PMKSA_ADD 1 +#define IW_PMKSA_REMOVE 2 +#define IW_PMKSA_FLUSH 3 + +#define IW_PMKID_LEN 16 + +struct iw_pmksa +{ + __u32 cmd; /* IW_PMKSA_* */ + struct sockaddr bssid; + __u8 pmkid[IW_PMKID_LEN]; +}; + +/* IWEVMICHAELMICFAILURE data */ +struct iw_michaelmicfailure +{ + __u32 flags; + struct sockaddr src_addr; + __u8 tsc[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */ +}; + +/* IWEVPMKIDCAND data */ +#define IW_PMKID_CAND_PREAUTH 0x00000001 /* RNS pre-authentication enabled */ +struct iw_pmkid_cand +{ + __u32 flags; /* IW_PMKID_CAND_* */ + __u32 index; /* the smaller the index, the higher the + * priority */ + struct sockaddr bssid; +}; + +/* ------------------------ WIRELESS STATS ------------------------ */ +/* + * Wireless statistics (used for /proc/net/wireless) + */ +struct iw_statistics +{ + __u16 status; /* Status + * - device dependent for now */ + + struct iw_quality qual; /* Quality of the link + * (instant/mean/max) */ + struct iw_discarded discard; /* Packet discarded counts */ + struct iw_missed miss; /* Packet missed counts */ +}; + +/* ------------------------ IOCTL REQUEST ------------------------ */ +/* + * This structure defines the payload of an ioctl, and is used + * below. + * + * Note that this structure should fit on the memory footprint + * of iwreq (which is the same as ifreq), which mean a max size of + * 16 octets = 128 bits. Warning, pointers might be 64 bits wide... + * You should check this when increasing the structures defined + * above in this file... + */ +union iwreq_data +{ + /* Config - generic */ + char name[IFNAMSIZ]; + /* Name : used to verify the presence of wireless extensions. + * Name of the protocol/provider... */ + + struct iw_point essid; /* Extended network name */ + struct iw_param nwid; /* network id (or domain - the cell) */ + struct iw_freq freq; /* frequency or channel : + * 0-1000 = channel + * > 1000 = frequency in Hz */ + + struct iw_param sens; /* signal level threshold */ + struct iw_param bitrate; /* default bit rate */ + struct iw_param txpower; /* default transmit power */ + struct iw_param rts; /* RTS threshold threshold */ + struct iw_param frag; /* Fragmentation threshold */ + __u32 mode; /* Operation mode */ + struct iw_param retry; /* Retry limits & lifetime */ + + struct iw_point encoding; /* Encoding stuff : tokens */ + struct iw_param power; /* PM duration/timeout */ + struct iw_quality qual; /* Quality part of statistics */ + + struct sockaddr ap_addr; /* Access point address */ + struct sockaddr addr; /* Destination address (hw/mac) */ + + struct iw_param param; /* Other small parameters */ + struct iw_point data; /* Other large parameters */ +}; + +/* + * The structure to exchange data for ioctl. + * This structure is the same as 'struct ifreq', but (re)defined for + * convenience... + * Do I need to remind you about structure size (32 octets) ? + */ +struct iwreq +{ + union + { + char ifrn_name[IFNAMSIZ]; /* if name, e.g. "eth0" */ + } ifr_ifrn; + + /* Data part (defined just above) */ + union iwreq_data u; +}; + +/* -------------------------- IOCTL DATA -------------------------- */ +/* + * For those ioctl which want to exchange mode data that what could + * fit in the above structure... + */ + +/* + * Range of parameters + */ + +struct iw_range +{ + /* Informative stuff (to choose between different interface) */ + __u32 throughput; /* To give an idea... */ + /* In theory this value should be the maximum benchmarked + * TCP/IP throughput, because with most of these devices the + * bit rate is meaningless (overhead an co) to estimate how + * fast the connection will go and pick the fastest one. + * I suggest people to play with Netperf or any benchmark... + */ + + /* NWID (or domain id) */ + __u32 min_nwid; /* Minimal NWID we are able to set */ + __u32 max_nwid; /* Maximal NWID we are able to set */ + + /* Old Frequency (backward compat - moved lower ) */ + __u16 old_num_channels; + __u8 old_num_frequency; + + /* Scan capabilities */ + __u8 scan_capa; /* IW_SCAN_CAPA_* bit field */ + + /* Wireless event capability bitmasks */ + __u32 event_capa[6]; + + /* signal level threshold range */ + __s32 sensitivity; + + /* Quality of link & SNR stuff */ + /* Quality range (link, level, noise) + * If the quality is absolute, it will be in the range [0 ; max_qual], + * if the quality is dBm, it will be in the range [max_qual ; 0]. + * Don't forget that we use 8 bit arithmetics... */ + struct iw_quality max_qual; /* Quality of the link */ + /* This should contain the average/typical values of the quality + * indicator. This should be the threshold between a "good" and + * a "bad" link (example : monitor going from green to orange). + * Currently, user space apps like quality monitors don't have any + * way to calibrate the measurement. With this, they can split + * the range between 0 and max_qual in different quality level + * (using a geometric subdivision centered on the average). + * I expect that people doing the user space apps will feedback + * us on which value we need to put in each driver... */ + struct iw_quality avg_qual; /* Quality of the link */ + + /* Rates */ + __u8 num_bitrates; /* Number of entries in the list */ + __s32 bitrate[IW_MAX_BITRATES]; /* list, in bps */ + + /* RTS threshold */ + __s32 min_rts; /* Minimal RTS threshold */ + __s32 max_rts; /* Maximal RTS threshold */ + + /* Frag threshold */ + __s32 min_frag; /* Minimal frag threshold */ + __s32 max_frag; /* Maximal frag threshold */ + + /* Power Management duration & timeout */ + __s32 min_pmp; /* Minimal PM period */ + __s32 max_pmp; /* Maximal PM period */ + __s32 min_pmt; /* Minimal PM timeout */ + __s32 max_pmt; /* Maximal PM timeout */ + __u16 pmp_flags; /* How to decode max/min PM period */ + __u16 pmt_flags; /* How to decode max/min PM timeout */ + __u16 pm_capa; /* What PM options are supported */ + + /* Encoder stuff */ + __u16 encoding_size[IW_MAX_ENCODING_SIZES]; /* Different token sizes */ + __u8 num_encoding_sizes; /* Number of entry in the list */ + __u8 max_encoding_tokens; /* Max number of tokens */ + /* For drivers that need a "login/passwd" form */ + __u8 encoding_login_index; /* token index for login token */ + + /* Transmit power */ + __u16 txpower_capa; /* What options are supported */ + __u8 num_txpower; /* Number of entries in the list */ + __s32 txpower[IW_MAX_TXPOWER]; /* list, in bps */ + + /* Wireless Extension version info */ + __u8 we_version_compiled; /* Must be WIRELESS_EXT */ + __u8 we_version_source; /* Last update of source */ + + /* Retry limits and lifetime */ + __u16 retry_capa; /* What retry options are supported */ + __u16 retry_flags; /* How to decode max/min retry limit */ + __u16 r_time_flags; /* How to decode max/min retry life */ + __s32 min_retry; /* Minimal number of retries */ + __s32 max_retry; /* Maximal number of retries */ + __s32 min_r_time; /* Minimal retry lifetime */ + __s32 max_r_time; /* Maximal retry lifetime */ + + /* Frequency */ + __u16 num_channels; /* Number of channels [0; num - 1] */ + __u8 num_frequency; /* Number of entry in the list */ + struct iw_freq freq[IW_MAX_FREQUENCIES]; /* list */ + /* Note : this frequency list doesn't need to fit channel numbers, + * because each entry contain its channel index */ + + __u32 enc_capa; /* IW_ENC_CAPA_* bit field */ +}; + +/* + * Private ioctl interface information + */ + +struct iw_priv_args +{ + __u32 cmd; /* Number of the ioctl to issue */ + __u16 set_args; /* Type and number of args */ + __u16 get_args; /* Type and number of args */ + char name[IFNAMSIZ]; /* Name of the extension */ +}; + +/* ----------------------- WIRELESS EVENTS ----------------------- */ +/* + * Wireless events are carried through the rtnetlink socket to user + * space. They are encapsulated in the IFLA_WIRELESS field of + * a RTM_NEWLINK message. + */ + +/* + * A Wireless Event. Contains basically the same data as the ioctl... + */ +struct iw_event +{ + __u16 len; /* Real length of this stuff */ + __u16 cmd; /* Wireless IOCTL */ + union iwreq_data u; /* IOCTL fixed payload */ +}; + +/* Size of the Event prefix (including padding and alignement junk) */ +#define IW_EV_LCP_LEN (sizeof(struct iw_event) - sizeof(union iwreq_data)) +/* Size of the various events */ +#define IW_EV_CHAR_LEN (IW_EV_LCP_LEN + IFNAMSIZ) +#define IW_EV_UINT_LEN (IW_EV_LCP_LEN + sizeof(__u32)) +#define IW_EV_FREQ_LEN (IW_EV_LCP_LEN + sizeof(struct iw_freq)) +#define IW_EV_PARAM_LEN (IW_EV_LCP_LEN + sizeof(struct iw_param)) +#define IW_EV_ADDR_LEN (IW_EV_LCP_LEN + sizeof(struct sockaddr)) +#define IW_EV_QUAL_LEN (IW_EV_LCP_LEN + sizeof(struct iw_quality)) + +/* iw_point events are special. First, the payload (extra data) come at + * the end of the event, so they are bigger than IW_EV_POINT_LEN. Second, + * we omit the pointer, so start at an offset. */ +#define IW_EV_POINT_OFF (((char *) &(((struct iw_point *) NULL)->length)) - \ + (char *) NULL) +#define IW_EV_POINT_LEN (IW_EV_LCP_LEN + sizeof(struct iw_point) - \ + IW_EV_POINT_OFF) + + +/* Size of the Event prefix when packed in stream */ +#define IW_EV_LCP_PK_LEN (4) +/* Size of the various events when packed in stream */ +#define IW_EV_CHAR_PK_LEN (IW_EV_LCP_PK_LEN + IFNAMSIZ) +#define IW_EV_UINT_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(__u32)) +#define IW_EV_FREQ_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_freq)) +#define IW_EV_PARAM_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_param)) +#define IW_EV_ADDR_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct sockaddr)) +#define IW_EV_QUAL_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_quality)) +#define IW_EV_POINT_PK_LEN (IW_EV_LCP_PK_LEN + 4) + +#endif /* _UAPI_LINUX_WIRELESS_H */ diff --git a/include/linux/x25.h b/include/uapi/linux/x25.h index 810cce6737e..810cce6737e 100644 --- a/include/linux/x25.h +++ b/include/uapi/linux/x25.h diff --git a/include/uapi/linux/xattr.h b/include/uapi/linux/xattr.h new file mode 100644 index 00000000000..26607bd965f --- /dev/null +++ b/include/uapi/linux/xattr.h @@ -0,0 +1,64 @@ +/* + File: linux/xattr.h + + Extended attributes handling. + + Copyright (C) 2001 by Andreas Gruenbacher <a.gruenbacher@computer.org> + Copyright (c) 2001-2002 Silicon Graphics, Inc. All Rights Reserved. + Copyright (c) 2004 Red Hat, Inc., James Morris <jmorris@redhat.com> +*/ +#ifndef _UAPI_LINUX_XATTR_H +#define _UAPI_LINUX_XATTR_H + +#define XATTR_CREATE 0x1 /* set value, fail if attr already exists */ +#define XATTR_REPLACE 0x2 /* set value, fail if attr does not exist */ + +/* Namespaces */ +#define XATTR_OS2_PREFIX "os2." +#define XATTR_OS2_PREFIX_LEN (sizeof (XATTR_OS2_PREFIX) - 1) + +#define XATTR_SECURITY_PREFIX "security." +#define XATTR_SECURITY_PREFIX_LEN (sizeof (XATTR_SECURITY_PREFIX) - 1) + +#define XATTR_SYSTEM_PREFIX "system." +#define XATTR_SYSTEM_PREFIX_LEN (sizeof (XATTR_SYSTEM_PREFIX) - 1) + +#define XATTR_TRUSTED_PREFIX "trusted." +#define XATTR_TRUSTED_PREFIX_LEN (sizeof (XATTR_TRUSTED_PREFIX) - 1) + +#define XATTR_USER_PREFIX "user." +#define XATTR_USER_PREFIX_LEN (sizeof (XATTR_USER_PREFIX) - 1) + +/* Security namespace */ +#define XATTR_EVM_SUFFIX "evm" +#define XATTR_NAME_EVM XATTR_SECURITY_PREFIX XATTR_EVM_SUFFIX + +#define XATTR_IMA_SUFFIX "ima" +#define XATTR_NAME_IMA XATTR_SECURITY_PREFIX XATTR_IMA_SUFFIX + +#define XATTR_SELINUX_SUFFIX "selinux" +#define XATTR_NAME_SELINUX XATTR_SECURITY_PREFIX XATTR_SELINUX_SUFFIX + +#define XATTR_SMACK_SUFFIX "SMACK64" +#define XATTR_SMACK_IPIN "SMACK64IPIN" +#define XATTR_SMACK_IPOUT "SMACK64IPOUT" +#define XATTR_SMACK_EXEC "SMACK64EXEC" +#define XATTR_SMACK_TRANSMUTE "SMACK64TRANSMUTE" +#define XATTR_SMACK_MMAP "SMACK64MMAP" +#define XATTR_NAME_SMACK XATTR_SECURITY_PREFIX XATTR_SMACK_SUFFIX +#define XATTR_NAME_SMACKIPIN XATTR_SECURITY_PREFIX XATTR_SMACK_IPIN +#define XATTR_NAME_SMACKIPOUT XATTR_SECURITY_PREFIX XATTR_SMACK_IPOUT +#define XATTR_NAME_SMACKEXEC XATTR_SECURITY_PREFIX XATTR_SMACK_EXEC +#define XATTR_NAME_SMACKTRANSMUTE XATTR_SECURITY_PREFIX XATTR_SMACK_TRANSMUTE +#define XATTR_NAME_SMACKMMAP XATTR_SECURITY_PREFIX XATTR_SMACK_MMAP + +#define XATTR_CAPS_SUFFIX "capability" +#define XATTR_NAME_CAPS XATTR_SECURITY_PREFIX XATTR_CAPS_SUFFIX + +#define XATTR_POSIX_ACL_ACCESS "posix_acl_access" +#define XATTR_NAME_POSIX_ACL_ACCESS XATTR_SYSTEM_PREFIX XATTR_POSIX_ACL_ACCESS +#define XATTR_POSIX_ACL_DEFAULT "posix_acl_default" +#define XATTR_NAME_POSIX_ACL_DEFAULT XATTR_SYSTEM_PREFIX XATTR_POSIX_ACL_DEFAULT + + +#endif /* _UAPI_LINUX_XATTR_H */ diff --git a/include/linux/xfrm.h b/include/uapi/linux/xfrm.h index 28e493b5b94..28e493b5b94 100644 --- a/include/linux/xfrm.h +++ b/include/uapi/linux/xfrm.h diff --git a/include/uapi/xen/Kbuild b/include/uapi/xen/Kbuild index aafaa5aa54d..61257cb1465 100644 --- a/include/uapi/xen/Kbuild +++ b/include/uapi/xen/Kbuild @@ -1 +1,3 @@ # UAPI Header export list +header-y += evtchn.h +header-y += privcmd.h diff --git a/include/xen/evtchn.h b/include/uapi/xen/evtchn.h index 14e833ee4e0..14e833ee4e0 100644 --- a/include/xen/evtchn.h +++ b/include/uapi/xen/evtchn.h diff --git a/include/xen/privcmd.h b/include/uapi/xen/privcmd.h index a85316811d7..a85316811d7 100644 --- a/include/xen/privcmd.h +++ b/include/uapi/xen/privcmd.h diff --git a/include/video/omapdss.h b/include/video/omapdss.h index a6267a2d292..3729173b7fb 100644 --- a/include/video/omapdss.h +++ b/include/video/omapdss.h @@ -48,10 +48,10 @@ #define DISPC_IRQ_FRAMEDONEWB (1 << 23) #define DISPC_IRQ_FRAMEDONETV (1 << 24) #define DISPC_IRQ_WBBUFFEROVERFLOW (1 << 25) -#define DISPC_IRQ_FRAMEDONE3 (1 << 26) -#define DISPC_IRQ_VSYNC3 (1 << 27) -#define DISPC_IRQ_ACBIAS_COUNT_STAT3 (1 << 28) -#define DISPC_IRQ_SYNC_LOST3 (1 << 29) +#define DISPC_IRQ_SYNC_LOST3 (1 << 27) +#define DISPC_IRQ_VSYNC3 (1 << 28) +#define DISPC_IRQ_ACBIAS_COUNT_STAT3 (1 << 29) +#define DISPC_IRQ_FRAMEDONE3 (1 << 30) struct omap_dss_device; struct omap_overlay_manager; @@ -73,6 +73,7 @@ enum omap_plane { OMAP_DSS_VIDEO1 = 1, OMAP_DSS_VIDEO2 = 2, OMAP_DSS_VIDEO3 = 3, + OMAP_DSS_WB = 4, }; enum omap_channel { @@ -186,6 +187,8 @@ enum omap_overlay_caps { OMAP_DSS_OVL_CAP_GLOBAL_ALPHA = 1 << 1, OMAP_DSS_OVL_CAP_PRE_MULT_ALPHA = 1 << 2, OMAP_DSS_OVL_CAP_ZORDER = 1 << 3, + OMAP_DSS_OVL_CAP_POS = 1 << 4, + OMAP_DSS_OVL_CAP_REPLICATION = 1 << 5, }; enum omap_overlay_manager_caps { @@ -207,6 +210,16 @@ enum omap_hdmi_flags { OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP = 1 << 0, }; +enum omap_dss_output_id { + OMAP_DSS_OUTPUT_DPI = 1 << 0, + OMAP_DSS_OUTPUT_DBI = 1 << 1, + OMAP_DSS_OUTPUT_SDI = 1 << 2, + OMAP_DSS_OUTPUT_DSI1 = 1 << 3, + OMAP_DSS_OUTPUT_DSI2 = 1 << 4, + OMAP_DSS_OUTPUT_VENC = 1 << 5, + OMAP_DSS_OUTPUT_HDMI = 1 << 6, +}; + /* RFBI */ struct rfbi_timings { @@ -243,7 +256,7 @@ void rfbi_bus_unlock(void); /* DSI */ -struct omap_dss_dsi_videomode_data { +struct omap_dss_dsi_videomode_timings { /* DSI video mode blanking data */ /* Unit: byte clock cycles */ u16 hsa; @@ -424,6 +437,8 @@ struct omap_overlay { struct omap_overlay_info *info); int (*wait_for_go)(struct omap_overlay *ovl); + + struct omap_dss_device *(*get_device)(struct omap_overlay *ovl); }; struct omap_overlay_manager_info { @@ -448,9 +463,10 @@ struct omap_overlay_manager { enum omap_overlay_manager_caps caps; struct list_head overlays; enum omap_display_type supported_displays; + enum omap_dss_output_id supported_outputs; /* dynamic fields */ - struct omap_dss_device *device; + struct omap_dss_output *output; /* * The following functions do not block: @@ -463,9 +479,9 @@ struct omap_overlay_manager { * interrupt context */ - int (*set_device)(struct omap_overlay_manager *mgr, - struct omap_dss_device *dssdev); - int (*unset_device)(struct omap_overlay_manager *mgr); + int (*set_output)(struct omap_overlay_manager *mgr, + struct omap_dss_output *output); + int (*unset_output)(struct omap_overlay_manager *mgr); int (*set_manager_info)(struct omap_overlay_manager *mgr, struct omap_overlay_manager_info *info); @@ -475,6 +491,8 @@ struct omap_overlay_manager { int (*apply)(struct omap_overlay_manager *mgr); int (*wait_for_go)(struct omap_overlay_manager *mgr); int (*wait_for_vsync)(struct omap_overlay_manager *mgr); + + struct omap_dss_device *(*get_device)(struct omap_overlay_manager *mgr); }; /* 22 pins means 1 clk lane and 10 data lanes */ @@ -492,6 +510,37 @@ struct omap_dsi_pin_config { int pins[OMAP_DSS_MAX_DSI_PINS]; }; +struct omap_dss_writeback_info { + u32 paddr; + u32 p_uv_addr; + u16 buf_width; + u16 width; + u16 height; + enum omap_color_mode color_mode; + u8 rotation; + enum omap_dss_rotation_type rotation_type; + bool mirror; + u8 pre_mult_alpha; +}; + +struct omap_dss_output { + struct list_head list; + + /* display type supported by the output */ + enum omap_display_type type; + + /* output instance */ + enum omap_dss_output_id id; + + /* output's platform device pointer */ + struct platform_device *pdev; + + /* dynamic fields */ + struct omap_overlay_manager *manager; + + struct omap_dss_device *device; +}; + struct omap_dss_device { struct device dev; @@ -564,7 +613,7 @@ struct omap_dss_device { enum omap_dss_dsi_pixel_format dsi_pix_fmt; enum omap_dss_dsi_mode dsi_mode; - struct omap_dss_dsi_videomode_data dsi_vm_data; + struct omap_dss_dsi_videomode_timings dsi_vm_timings; } panel; struct { @@ -590,7 +639,7 @@ struct omap_dss_device { enum omap_display_caps caps; - struct omap_overlay_manager *manager; + struct omap_dss_output *output; enum omap_dss_display_state state; @@ -605,6 +654,8 @@ struct omap_dss_device { struct omap_dss_hdmi_data { + int ct_cp_hpd_gpio; + int ls_oe_gpio; int hpd_gpio; }; @@ -699,6 +750,11 @@ struct omap_overlay_manager *omap_dss_get_overlay_manager(int num); int omap_dss_get_num_overlays(void); struct omap_overlay *omap_dss_get_overlay(int num); +struct omap_dss_output *omap_dss_get_output(enum omap_dss_output_id id); +int omapdss_output_set_device(struct omap_dss_output *out, + struct omap_dss_device *dssdev); +int omapdss_output_unset_device(struct omap_dss_output *out); + void omapdss_default_get_resolution(struct omap_dss_device *dssdev, u16 *xres, u16 *yres); int omapdss_default_get_recommended_bpp(struct omap_dss_device *dssdev); @@ -719,6 +775,15 @@ int omap_dispc_wait_for_irq_interruptible_timeout(u32 irqmask, void omapdss_dsi_vc_enable_hs(struct omap_dss_device *dssdev, int channel, bool enable); int omapdss_dsi_enable_te(struct omap_dss_device *dssdev, bool enable); +void omapdss_dsi_set_timings(struct omap_dss_device *dssdev, + struct omap_video_timings *timings); +void omapdss_dsi_set_size(struct omap_dss_device *dssdev, u16 w, u16 h); +void omapdss_dsi_set_pixel_format(struct omap_dss_device *dssdev, + enum omap_dss_dsi_pixel_format fmt); +void omapdss_dsi_set_operation_mode(struct omap_dss_device *dssdev, + enum omap_dss_dsi_mode mode); +void omapdss_dsi_set_videomode_timings(struct omap_dss_device *dssdev, + struct omap_dss_dsi_videomode_timings *timings); int omap_dsi_update(struct omap_dss_device *dssdev, int channel, void (*callback)(int, void *), void *data); @@ -727,6 +792,8 @@ int omap_dsi_set_vc_id(struct omap_dss_device *dssdev, int channel, int vc_id); void omap_dsi_release_vc(struct omap_dss_device *dssdev, int channel); int omapdss_dsi_configure_pins(struct omap_dss_device *dssdev, const struct omap_dsi_pin_config *pin_cfg); +int omapdss_dsi_set_clocks(struct omap_dss_device *dssdev, + unsigned long ddr_clk, unsigned long lp_clk); int omapdss_dsi_display_enable(struct omap_dss_device *dssdev); void omapdss_dsi_display_disable(struct omap_dss_device *dssdev, @@ -734,22 +801,29 @@ void omapdss_dsi_display_disable(struct omap_dss_device *dssdev, int omapdss_dpi_display_enable(struct omap_dss_device *dssdev); void omapdss_dpi_display_disable(struct omap_dss_device *dssdev); -void dpi_set_timings(struct omap_dss_device *dssdev, - struct omap_video_timings *timings); +void omapdss_dpi_set_timings(struct omap_dss_device *dssdev, + struct omap_video_timings *timings); int dpi_check_timings(struct omap_dss_device *dssdev, struct omap_video_timings *timings); +void omapdss_dpi_set_data_lines(struct omap_dss_device *dssdev, int data_lines); int omapdss_sdi_display_enable(struct omap_dss_device *dssdev); void omapdss_sdi_display_disable(struct omap_dss_device *dssdev); +void omapdss_sdi_set_timings(struct omap_dss_device *dssdev, + struct omap_video_timings *timings); +void omapdss_sdi_set_datapairs(struct omap_dss_device *dssdev, int datapairs); int omapdss_rfbi_display_enable(struct omap_dss_device *dssdev); void omapdss_rfbi_display_disable(struct omap_dss_device *dssdev); -int omap_rfbi_prepare_update(struct omap_dss_device *dssdev, - u16 *x, u16 *y, u16 *w, u16 *h); -int omap_rfbi_update(struct omap_dss_device *dssdev, - u16 x, u16 y, u16 w, u16 h, - void (*callback)(void *), void *data); -int omap_rfbi_configure(struct omap_dss_device *dssdev, int pixel_size, +int omap_rfbi_update(struct omap_dss_device *dssdev, void (*callback)(void *), + void *data); +int omap_rfbi_configure(struct omap_dss_device *dssdev); +void omapdss_rfbi_set_size(struct omap_dss_device *dssdev, u16 w, u16 h); +void omapdss_rfbi_set_pixel_size(struct omap_dss_device *dssdev, + int pixel_size); +void omapdss_rfbi_set_data_lines(struct omap_dss_device *dssdev, int data_lines); +void omapdss_rfbi_set_interface_timings(struct omap_dss_device *dssdev, + struct rfbi_timings *timings); #endif diff --git a/include/video/samsung_fimd.h b/include/video/samsung_fimd.h new file mode 100644 index 00000000000..7ae6c07f2ef --- /dev/null +++ b/include/video/samsung_fimd.h @@ -0,0 +1,533 @@ +/* include/video/samsung_fimd.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C Platform - new-style fimd and framebuffer register definitions + * + * This is the register set for the fimd and new style framebuffer interface + * found from the S3C2443 onwards into the S3C2416, S3C2450 and the + * S3C64XX series such as the S3C6400 and S3C6410. + * + * The file does not contain the cpu specific items which are based on + * whichever architecture is selected, it only contains the core of the + * register set. See <mach/regs-fb.h> to get the specifics. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* VIDCON0 */ + +#define VIDCON0 (0x00) +#define VIDCON0_INTERLACE (1 << 29) +#define VIDCON0_VIDOUT_MASK (0x3 << 26) +#define VIDCON0_VIDOUT_SHIFT (26) +#define VIDCON0_VIDOUT_RGB (0x0 << 26) +#define VIDCON0_VIDOUT_TV (0x1 << 26) +#define VIDCON0_VIDOUT_I80_LDI0 (0x2 << 26) +#define VIDCON0_VIDOUT_I80_LDI1 (0x3 << 26) + +#define VIDCON0_L1_DATA_MASK (0x7 << 23) +#define VIDCON0_L1_DATA_SHIFT (23) +#define VIDCON0_L1_DATA_16BPP (0x0 << 23) +#define VIDCON0_L1_DATA_18BPP16 (0x1 << 23) +#define VIDCON0_L1_DATA_18BPP9 (0x2 << 23) +#define VIDCON0_L1_DATA_24BPP (0x3 << 23) +#define VIDCON0_L1_DATA_18BPP (0x4 << 23) +#define VIDCON0_L1_DATA_16BPP8 (0x5 << 23) + +#define VIDCON0_L0_DATA_MASK (0x7 << 20) +#define VIDCON0_L0_DATA_SHIFT (20) +#define VIDCON0_L0_DATA_16BPP (0x0 << 20) +#define VIDCON0_L0_DATA_18BPP16 (0x1 << 20) +#define VIDCON0_L0_DATA_18BPP9 (0x2 << 20) +#define VIDCON0_L0_DATA_24BPP (0x3 << 20) +#define VIDCON0_L0_DATA_18BPP (0x4 << 20) +#define VIDCON0_L0_DATA_16BPP8 (0x5 << 20) + +#define VIDCON0_PNRMODE_MASK (0x3 << 17) +#define VIDCON0_PNRMODE_SHIFT (17) +#define VIDCON0_PNRMODE_RGB (0x0 << 17) +#define VIDCON0_PNRMODE_BGR (0x1 << 17) +#define VIDCON0_PNRMODE_SERIAL_RGB (0x2 << 17) +#define VIDCON0_PNRMODE_SERIAL_BGR (0x3 << 17) + +#define VIDCON0_CLKVALUP (1 << 16) +#define VIDCON0_CLKVAL_F_MASK (0xff << 6) +#define VIDCON0_CLKVAL_F_SHIFT (6) +#define VIDCON0_CLKVAL_F_LIMIT (0xff) +#define VIDCON0_CLKVAL_F(_x) ((_x) << 6) +#define VIDCON0_VLCKFREE (1 << 5) +#define VIDCON0_CLKDIR (1 << 4) + +#define VIDCON0_CLKSEL_MASK (0x3 << 2) +#define VIDCON0_CLKSEL_SHIFT (2) +#define VIDCON0_CLKSEL_HCLK (0x0 << 2) +#define VIDCON0_CLKSEL_LCD (0x1 << 2) +#define VIDCON0_CLKSEL_27M (0x3 << 2) + +#define VIDCON0_ENVID (1 << 1) +#define VIDCON0_ENVID_F (1 << 0) + +#define VIDCON1 (0x04) +#define VIDCON1_LINECNT_MASK (0x7ff << 16) +#define VIDCON1_LINECNT_SHIFT (16) +#define VIDCON1_LINECNT_GET(_v) (((_v) >> 16) & 0x7ff) +#define VIDCON1_VSTATUS_MASK (0x3 << 13) +#define VIDCON1_VSTATUS_SHIFT (13) +#define VIDCON1_VSTATUS_VSYNC (0x0 << 13) +#define VIDCON1_VSTATUS_BACKPORCH (0x1 << 13) +#define VIDCON1_VSTATUS_ACTIVE (0x2 << 13) +#define VIDCON1_VSTATUS_FRONTPORCH (0x0 << 13) +#define VIDCON1_VCLK_MASK (0x3 << 9) +#define VIDCON1_VCLK_HOLD (0x0 << 9) +#define VIDCON1_VCLK_RUN (0x1 << 9) + +#define VIDCON1_INV_VCLK (1 << 7) +#define VIDCON1_INV_HSYNC (1 << 6) +#define VIDCON1_INV_VSYNC (1 << 5) +#define VIDCON1_INV_VDEN (1 << 4) + +/* VIDCON2 */ + +#define VIDCON2 (0x08) +#define VIDCON2_EN601 (1 << 23) +#define VIDCON2_TVFMTSEL_SW (1 << 14) + +#define VIDCON2_TVFMTSEL1_MASK (0x3 << 12) +#define VIDCON2_TVFMTSEL1_SHIFT (12) +#define VIDCON2_TVFMTSEL1_RGB (0x0 << 12) +#define VIDCON2_TVFMTSEL1_YUV422 (0x1 << 12) +#define VIDCON2_TVFMTSEL1_YUV444 (0x2 << 12) + +#define VIDCON2_ORGYCbCr (1 << 8) +#define VIDCON2_YUVORDCrCb (1 << 7) + +/* PRTCON (S3C6410, S5PC100) + * Might not be present in the S3C6410 documentation, + * but tests prove it's there almost for sure; shouldn't hurt in any case. + */ +#define PRTCON (0x0c) +#define PRTCON_PROTECT (1 << 11) + +/* VIDTCON0 */ + +#define VIDTCON0_VBPDE_MASK (0xff << 24) +#define VIDTCON0_VBPDE_SHIFT (24) +#define VIDTCON0_VBPDE_LIMIT (0xff) +#define VIDTCON0_VBPDE(_x) ((_x) << 24) + +#define VIDTCON0_VBPD_MASK (0xff << 16) +#define VIDTCON0_VBPD_SHIFT (16) +#define VIDTCON0_VBPD_LIMIT (0xff) +#define VIDTCON0_VBPD(_x) ((_x) << 16) + +#define VIDTCON0_VFPD_MASK (0xff << 8) +#define VIDTCON0_VFPD_SHIFT (8) +#define VIDTCON0_VFPD_LIMIT (0xff) +#define VIDTCON0_VFPD(_x) ((_x) << 8) + +#define VIDTCON0_VSPW_MASK (0xff << 0) +#define VIDTCON0_VSPW_SHIFT (0) +#define VIDTCON0_VSPW_LIMIT (0xff) +#define VIDTCON0_VSPW(_x) ((_x) << 0) + +/* VIDTCON1 */ + +#define VIDTCON1_VFPDE_MASK (0xff << 24) +#define VIDTCON1_VFPDE_SHIFT (24) +#define VIDTCON1_VFPDE_LIMIT (0xff) +#define VIDTCON1_VFPDE(_x) ((_x) << 24) + +#define VIDTCON1_HBPD_MASK (0xff << 16) +#define VIDTCON1_HBPD_SHIFT (16) +#define VIDTCON1_HBPD_LIMIT (0xff) +#define VIDTCON1_HBPD(_x) ((_x) << 16) + +#define VIDTCON1_HFPD_MASK (0xff << 8) +#define VIDTCON1_HFPD_SHIFT (8) +#define VIDTCON1_HFPD_LIMIT (0xff) +#define VIDTCON1_HFPD(_x) ((_x) << 8) + +#define VIDTCON1_HSPW_MASK (0xff << 0) +#define VIDTCON1_HSPW_SHIFT (0) +#define VIDTCON1_HSPW_LIMIT (0xff) +#define VIDTCON1_HSPW(_x) ((_x) << 0) + +#define VIDTCON2 (0x18) +#define VIDTCON2_LINEVAL_E(_x) ((((_x) & 0x800) >> 11) << 23) +#define VIDTCON2_LINEVAL_MASK (0x7ff << 11) +#define VIDTCON2_LINEVAL_SHIFT (11) +#define VIDTCON2_LINEVAL_LIMIT (0x7ff) +#define VIDTCON2_LINEVAL(_x) (((_x) & 0x7ff) << 11) + +#define VIDTCON2_HOZVAL_E(_x) ((((_x) & 0x800) >> 11) << 22) +#define VIDTCON2_HOZVAL_MASK (0x7ff << 0) +#define VIDTCON2_HOZVAL_SHIFT (0) +#define VIDTCON2_HOZVAL_LIMIT (0x7ff) +#define VIDTCON2_HOZVAL(_x) (((_x) & 0x7ff) << 0) + +/* WINCONx */ + + +#define WINCONx_BITSWP (1 << 18) +#define WINCONx_BYTSWP (1 << 17) +#define WINCONx_HAWSWP (1 << 16) +#define WINCONx_WSWP (1 << 15) +#define WINCONx_BURSTLEN_MASK (0x3 << 9) +#define WINCONx_BURSTLEN_SHIFT (9) +#define WINCONx_BURSTLEN_16WORD (0x0 << 9) +#define WINCONx_BURSTLEN_8WORD (0x1 << 9) +#define WINCONx_BURSTLEN_4WORD (0x2 << 9) + +#define WINCONx_ENWIN (1 << 0) +#define WINCON0_BPPMODE_MASK (0xf << 2) +#define WINCON0_BPPMODE_SHIFT (2) +#define WINCON0_BPPMODE_1BPP (0x0 << 2) +#define WINCON0_BPPMODE_2BPP (0x1 << 2) +#define WINCON0_BPPMODE_4BPP (0x2 << 2) +#define WINCON0_BPPMODE_8BPP_PALETTE (0x3 << 2) +#define WINCON0_BPPMODE_16BPP_565 (0x5 << 2) +#define WINCON0_BPPMODE_16BPP_1555 (0x7 << 2) +#define WINCON0_BPPMODE_18BPP_666 (0x8 << 2) +#define WINCON0_BPPMODE_24BPP_888 (0xb << 2) + +#define WINCON1_BLD_PIX (1 << 6) + +#define WINCON1_ALPHA_SEL (1 << 1) +#define WINCON1_BPPMODE_MASK (0xf << 2) +#define WINCON1_BPPMODE_SHIFT (2) +#define WINCON1_BPPMODE_1BPP (0x0 << 2) +#define WINCON1_BPPMODE_2BPP (0x1 << 2) +#define WINCON1_BPPMODE_4BPP (0x2 << 2) +#define WINCON1_BPPMODE_8BPP_PALETTE (0x3 << 2) +#define WINCON1_BPPMODE_8BPP_1232 (0x4 << 2) +#define WINCON1_BPPMODE_16BPP_565 (0x5 << 2) +#define WINCON1_BPPMODE_16BPP_A1555 (0x6 << 2) +#define WINCON1_BPPMODE_16BPP_I1555 (0x7 << 2) +#define WINCON1_BPPMODE_18BPP_666 (0x8 << 2) +#define WINCON1_BPPMODE_18BPP_A1665 (0x9 << 2) +#define WINCON1_BPPMODE_19BPP_A1666 (0xa << 2) +#define WINCON1_BPPMODE_24BPP_888 (0xb << 2) +#define WINCON1_BPPMODE_24BPP_A1887 (0xc << 2) +#define WINCON1_BPPMODE_25BPP_A1888 (0xd << 2) +#define WINCON1_BPPMODE_28BPP_A4888 (0xd << 2) + +/* S5PV210 */ +#define SHADOWCON (0x34) +#define SHADOWCON_WINx_PROTECT(_win) (1 << (10 + (_win))) +/* DMA channels (all windows) */ +#define SHADOWCON_CHx_ENABLE(_win) (1 << (_win)) +/* Local input channels (windows 0-2) */ +#define SHADOWCON_CHx_LOCAL_ENABLE(_win) (1 << (5 + (_win))) + +#define VIDOSDxA_TOPLEFT_X_E(_x) ((((_x) & 0x800) >> 11) << 23) +#define VIDOSDxA_TOPLEFT_X_MASK (0x7ff << 11) +#define VIDOSDxA_TOPLEFT_X_SHIFT (11) +#define VIDOSDxA_TOPLEFT_X_LIMIT (0x7ff) +#define VIDOSDxA_TOPLEFT_X(_x) (((_x) & 0x7ff) << 11) + +#define VIDOSDxA_TOPLEFT_Y_E(_x) ((((_x) & 0x800) >> 11) << 22) +#define VIDOSDxA_TOPLEFT_Y_MASK (0x7ff << 0) +#define VIDOSDxA_TOPLEFT_Y_SHIFT (0) +#define VIDOSDxA_TOPLEFT_Y_LIMIT (0x7ff) +#define VIDOSDxA_TOPLEFT_Y(_x) (((_x) & 0x7ff) << 0) + +#define VIDOSDxB_BOTRIGHT_X_E(_x) ((((_x) & 0x800) >> 11) << 23) +#define VIDOSDxB_BOTRIGHT_X_MASK (0x7ff << 11) +#define VIDOSDxB_BOTRIGHT_X_SHIFT (11) +#define VIDOSDxB_BOTRIGHT_X_LIMIT (0x7ff) +#define VIDOSDxB_BOTRIGHT_X(_x) (((_x) & 0x7ff) << 11) + +#define VIDOSDxB_BOTRIGHT_Y_E(_x) ((((_x) & 0x800) >> 11) << 22) +#define VIDOSDxB_BOTRIGHT_Y_MASK (0x7ff << 0) +#define VIDOSDxB_BOTRIGHT_Y_SHIFT (0) +#define VIDOSDxB_BOTRIGHT_Y_LIMIT (0x7ff) +#define VIDOSDxB_BOTRIGHT_Y(_x) (((_x) & 0x7ff) << 0) + +/* For VIDOSD[1..4]C */ +#define VIDISD14C_ALPHA0_R(_x) ((_x) << 20) +#define VIDISD14C_ALPHA0_G_MASK (0xf << 16) +#define VIDISD14C_ALPHA0_G_SHIFT (16) +#define VIDISD14C_ALPHA0_G_LIMIT (0xf) +#define VIDISD14C_ALPHA0_G(_x) ((_x) << 16) +#define VIDISD14C_ALPHA0_B_MASK (0xf << 12) +#define VIDISD14C_ALPHA0_B_SHIFT (12) +#define VIDISD14C_ALPHA0_B_LIMIT (0xf) +#define VIDISD14C_ALPHA0_B(_x) ((_x) << 12) +#define VIDISD14C_ALPHA1_R_MASK (0xf << 8) +#define VIDISD14C_ALPHA1_R_SHIFT (8) +#define VIDISD14C_ALPHA1_R_LIMIT (0xf) +#define VIDISD14C_ALPHA1_R(_x) ((_x) << 8) +#define VIDISD14C_ALPHA1_G_MASK (0xf << 4) +#define VIDISD14C_ALPHA1_G_SHIFT (4) +#define VIDISD14C_ALPHA1_G_LIMIT (0xf) +#define VIDISD14C_ALPHA1_G(_x) ((_x) << 4) +#define VIDISD14C_ALPHA1_B_MASK (0xf << 0) +#define VIDISD14C_ALPHA1_B_SHIFT (0) +#define VIDISD14C_ALPHA1_B_LIMIT (0xf) +#define VIDISD14C_ALPHA1_B(_x) ((_x) << 0) + +/* Video buffer addresses */ +#define VIDW_BUF_START(_buff) (0xA0 + ((_buff) * 8)) +#define VIDW_BUF_START1(_buff) (0xA4 + ((_buff) * 8)) +#define VIDW_BUF_END(_buff) (0xD0 + ((_buff) * 8)) +#define VIDW_BUF_END1(_buff) (0xD4 + ((_buff) * 8)) +#define VIDW_BUF_SIZE(_buff) (0x100 + ((_buff) * 4)) + +#define VIDW_BUF_SIZE_OFFSET_E(_x) ((((_x) & 0x2000) >> 13) << 27) +#define VIDW_BUF_SIZE_OFFSET_MASK (0x1fff << 13) +#define VIDW_BUF_SIZE_OFFSET_SHIFT (13) +#define VIDW_BUF_SIZE_OFFSET_LIMIT (0x1fff) +#define VIDW_BUF_SIZE_OFFSET(_x) (((_x) & 0x1fff) << 13) + +#define VIDW_BUF_SIZE_PAGEWIDTH_E(_x) ((((_x) & 0x2000) >> 13) << 26) +#define VIDW_BUF_SIZE_PAGEWIDTH_MASK (0x1fff << 0) +#define VIDW_BUF_SIZE_PAGEWIDTH_SHIFT (0) +#define VIDW_BUF_SIZE_PAGEWIDTH_LIMIT (0x1fff) +#define VIDW_BUF_SIZE_PAGEWIDTH(_x) (((_x) & 0x1fff) << 0) + +/* Interrupt controls and status */ + +#define VIDINTCON0_FIFOINTERVAL_MASK (0x3f << 20) +#define VIDINTCON0_FIFOINTERVAL_SHIFT (20) +#define VIDINTCON0_FIFOINTERVAL_LIMIT (0x3f) +#define VIDINTCON0_FIFOINTERVAL(_x) ((_x) << 20) + +#define VIDINTCON0_INT_SYSMAINCON (1 << 19) +#define VIDINTCON0_INT_SYSSUBCON (1 << 18) +#define VIDINTCON0_INT_I80IFDONE (1 << 17) + +#define VIDINTCON0_FRAMESEL0_MASK (0x3 << 15) +#define VIDINTCON0_FRAMESEL0_SHIFT (15) +#define VIDINTCON0_FRAMESEL0_BACKPORCH (0x0 << 15) +#define VIDINTCON0_FRAMESEL0_VSYNC (0x1 << 15) +#define VIDINTCON0_FRAMESEL0_ACTIVE (0x2 << 15) +#define VIDINTCON0_FRAMESEL0_FRONTPORCH (0x3 << 15) + +#define VIDINTCON0_FRAMESEL1 (1 << 13) +#define VIDINTCON0_FRAMESEL1_MASK (0x3 << 13) +#define VIDINTCON0_FRAMESEL1_NONE (0x0 << 13) +#define VIDINTCON0_FRAMESEL1_BACKPORCH (0x1 << 13) +#define VIDINTCON0_FRAMESEL1_VSYNC (0x2 << 13) +#define VIDINTCON0_FRAMESEL1_FRONTPORCH (0x3 << 13) + +#define VIDINTCON0_INT_FRAME (1 << 12) +#define VIDINTCON0_FIFIOSEL_MASK (0x7f << 5) +#define VIDINTCON0_FIFIOSEL_SHIFT (5) +#define VIDINTCON0_FIFIOSEL_WINDOW0 (0x1 << 5) +#define VIDINTCON0_FIFIOSEL_WINDOW1 (0x2 << 5) + +#define VIDINTCON0_FIFOLEVEL_MASK (0x7 << 2) +#define VIDINTCON0_FIFOLEVEL_SHIFT (2) +#define VIDINTCON0_FIFOLEVEL_TO25PC (0x0 << 2) +#define VIDINTCON0_FIFOLEVEL_TO50PC (0x1 << 2) +#define VIDINTCON0_FIFOLEVEL_TO75PC (0x2 << 2) +#define VIDINTCON0_FIFOLEVEL_EMPTY (0x3 << 2) +#define VIDINTCON0_FIFOLEVEL_FULL (0x4 << 2) + +#define VIDINTCON0_INT_FIFO_MASK (0x3 << 0) +#define VIDINTCON0_INT_FIFO_SHIFT (0) +#define VIDINTCON0_INT_ENABLE (1 << 0) + +#define VIDINTCON1 (0x134) +#define VIDINTCON1_INT_I180 (1 << 2) +#define VIDINTCON1_INT_FRAME (1 << 1) +#define VIDINTCON1_INT_FIFO (1 << 0) + +/* Window colour-key control registers */ +#define WKEYCON (0x140) /* 6410,V210 */ + +#define WKEYCON0 (0x00) +#define WKEYCON1 (0x04) + +#define WxKEYCON0_KEYBL_EN (1 << 26) +#define WxKEYCON0_KEYEN_F (1 << 25) +#define WxKEYCON0_DIRCON (1 << 24) +#define WxKEYCON0_COMPKEY_MASK (0xffffff << 0) +#define WxKEYCON0_COMPKEY_SHIFT (0) +#define WxKEYCON0_COMPKEY_LIMIT (0xffffff) +#define WxKEYCON0_COMPKEY(_x) ((_x) << 0) +#define WxKEYCON1_COLVAL_MASK (0xffffff << 0) +#define WxKEYCON1_COLVAL_SHIFT (0) +#define WxKEYCON1_COLVAL_LIMIT (0xffffff) +#define WxKEYCON1_COLVAL(_x) ((_x) << 0) + + +/* Window blanking (MAP) */ + +#define WINxMAP_MAP (1 << 24) +#define WINxMAP_MAP_COLOUR_MASK (0xffffff << 0) +#define WINxMAP_MAP_COLOUR_SHIFT (0) +#define WINxMAP_MAP_COLOUR_LIMIT (0xffffff) +#define WINxMAP_MAP_COLOUR(_x) ((_x) << 0) + +#define WPALCON_PAL_UPDATE (1 << 9) +#define WPALCON_W1PAL_MASK (0x7 << 3) +#define WPALCON_W1PAL_SHIFT (3) +#define WPALCON_W1PAL_25BPP_A888 (0x0 << 3) +#define WPALCON_W1PAL_24BPP (0x1 << 3) +#define WPALCON_W1PAL_19BPP_A666 (0x2 << 3) +#define WPALCON_W1PAL_18BPP_A665 (0x3 << 3) +#define WPALCON_W1PAL_18BPP (0x4 << 3) +#define WPALCON_W1PAL_16BPP_A555 (0x5 << 3) +#define WPALCON_W1PAL_16BPP_565 (0x6 << 3) + +#define WPALCON_W0PAL_MASK (0x7 << 0) +#define WPALCON_W0PAL_SHIFT (0) +#define WPALCON_W0PAL_25BPP_A888 (0x0 << 0) +#define WPALCON_W0PAL_24BPP (0x1 << 0) +#define WPALCON_W0PAL_19BPP_A666 (0x2 << 0) +#define WPALCON_W0PAL_18BPP_A665 (0x3 << 0) +#define WPALCON_W0PAL_18BPP (0x4 << 0) +#define WPALCON_W0PAL_16BPP_A555 (0x5 << 0) +#define WPALCON_W0PAL_16BPP_565 (0x6 << 0) + +/* Blending equation control */ +#define BLENDCON (0x260) +#define BLENDCON_NEW_MASK (1 << 0) +#define BLENDCON_NEW_8BIT_ALPHA_VALUE (1 << 0) +#define BLENDCON_NEW_4BIT_ALPHA_VALUE (0 << 0) + +#define S3C_FB_MAX_WIN (5) /* number of hardware windows available. */ +#define VIDCON1_FSTATUS_EVEN (1 << 15) + +/* Video timing controls */ +#define VIDTCON0 (0x10) +#define VIDTCON1 (0x14) +#define VIDTCON2 (0x18) + +/* Window position controls */ + +#define WINCON(_win) (0x20 + ((_win) * 4)) + +/* OSD1 and OSD4 do not have register D */ + +#define VIDOSD_BASE (0x40) + +#define VIDINTCON0 (0x130) + +/* WINCONx */ + +#define WINCONx_CSCWIDTH_MASK (0x3 << 26) +#define WINCONx_CSCWIDTH_SHIFT (26) +#define WINCONx_CSCWIDTH_WIDE (0x0 << 26) +#define WINCONx_CSCWIDTH_NARROW (0x3 << 26) + +#define WINCONx_ENLOCAL (1 << 22) +#define WINCONx_BUFSTATUS (1 << 21) +#define WINCONx_BUFSEL (1 << 20) +#define WINCONx_BUFAUTOEN (1 << 19) +#define WINCONx_YCbCr (1 << 13) + +#define WINCON1_LOCALSEL_CAMIF (1 << 23) + +#define WINCON2_LOCALSEL_CAMIF (1 << 23) +#define WINCON2_BLD_PIX (1 << 6) + +#define WINCON2_ALPHA_SEL (1 << 1) +#define WINCON2_BPPMODE_MASK (0xf << 2) +#define WINCON2_BPPMODE_SHIFT (2) +#define WINCON2_BPPMODE_1BPP (0x0 << 2) +#define WINCON2_BPPMODE_2BPP (0x1 << 2) +#define WINCON2_BPPMODE_4BPP (0x2 << 2) +#define WINCON2_BPPMODE_8BPP_1232 (0x4 << 2) +#define WINCON2_BPPMODE_16BPP_565 (0x5 << 2) +#define WINCON2_BPPMODE_16BPP_A1555 (0x6 << 2) +#define WINCON2_BPPMODE_16BPP_I1555 (0x7 << 2) +#define WINCON2_BPPMODE_18BPP_666 (0x8 << 2) +#define WINCON2_BPPMODE_18BPP_A1665 (0x9 << 2) +#define WINCON2_BPPMODE_19BPP_A1666 (0xa << 2) +#define WINCON2_BPPMODE_24BPP_888 (0xb << 2) +#define WINCON2_BPPMODE_24BPP_A1887 (0xc << 2) +#define WINCON2_BPPMODE_25BPP_A1888 (0xd << 2) +#define WINCON2_BPPMODE_28BPP_A4888 (0xd << 2) + +#define WINCON3_BLD_PIX (1 << 6) + +#define WINCON3_ALPHA_SEL (1 << 1) +#define WINCON3_BPPMODE_MASK (0xf << 2) +#define WINCON3_BPPMODE_SHIFT (2) +#define WINCON3_BPPMODE_1BPP (0x0 << 2) +#define WINCON3_BPPMODE_2BPP (0x1 << 2) +#define WINCON3_BPPMODE_4BPP (0x2 << 2) +#define WINCON3_BPPMODE_16BPP_565 (0x5 << 2) +#define WINCON3_BPPMODE_16BPP_A1555 (0x6 << 2) +#define WINCON3_BPPMODE_16BPP_I1555 (0x7 << 2) +#define WINCON3_BPPMODE_18BPP_666 (0x8 << 2) +#define WINCON3_BPPMODE_18BPP_A1665 (0x9 << 2) +#define WINCON3_BPPMODE_19BPP_A1666 (0xa << 2) +#define WINCON3_BPPMODE_24BPP_888 (0xb << 2) +#define WINCON3_BPPMODE_24BPP_A1887 (0xc << 2) +#define WINCON3_BPPMODE_25BPP_A1888 (0xd << 2) +#define WINCON3_BPPMODE_28BPP_A4888 (0xd << 2) + +#define VIDINTCON0_FIFIOSEL_WINDOW2 (0x10 << 5) +#define VIDINTCON0_FIFIOSEL_WINDOW3 (0x20 << 5) +#define VIDINTCON0_FIFIOSEL_WINDOW4 (0x40 << 5) + +#define DITHMODE (0x170) +#define WINxMAP(_win) (0x180 + ((_win) * 4)) + + +#define DITHMODE_R_POS_MASK (0x3 << 5) +#define DITHMODE_R_POS_SHIFT (5) +#define DITHMODE_R_POS_8BIT (0x0 << 5) +#define DITHMODE_R_POS_6BIT (0x1 << 5) +#define DITHMODE_R_POS_5BIT (0x2 << 5) + +#define DITHMODE_G_POS_MASK (0x3 << 3) +#define DITHMODE_G_POS_SHIFT (3) +#define DITHMODE_G_POS_8BIT (0x0 << 3) +#define DITHMODE_G_POS_6BIT (0x1 << 3) +#define DITHMODE_G_POS_5BIT (0x2 << 3) + +#define DITHMODE_B_POS_MASK (0x3 << 1) +#define DITHMODE_B_POS_SHIFT (1) +#define DITHMODE_B_POS_8BIT (0x0 << 1) +#define DITHMODE_B_POS_6BIT (0x1 << 1) +#define DITHMODE_B_POS_5BIT (0x2 << 1) + +#define DITHMODE_DITH_EN (1 << 0) + +#define WPALCON (0x1A0) + +/* Palette control */ +/* Note for S5PC100: you can still use those macros on WPALCON (aka WPALCON_L), + * but make sure that WPALCON_H W2PAL-W4PAL entries are zeroed out */ +#define WPALCON_W4PAL_16BPP_A555 (1 << 8) +#define WPALCON_W3PAL_16BPP_A555 (1 << 7) +#define WPALCON_W2PAL_16BPP_A555 (1 << 6) + + +/* Notes on per-window bpp settings + * + * Value Win0 Win1 Win2 Win3 Win 4 + * 0000 1(P) 1(P) 1(P) 1(P) 1(P) + * 0001 2(P) 2(P) 2(P) 2(P) 2(P) + * 0010 4(P) 4(P) 4(P) 4(P) -none- + * 0011 8(P) 8(P) -none- -none- -none- + * 0100 -none- 8(A232) 8(A232) -none- -none- + * 0101 16(565) 16(565) 16(565) 16(565) 16(565) + * 0110 -none- 16(A555) 16(A555) 16(A555) 16(A555) + * 0111 16(I555) 16(I565) 16(I555) 16(I555) 16(I555) + * 1000 18(666) 18(666) 18(666) 18(666) 18(666) + * 1001 -none- 18(A665) 18(A665) 18(A665) 16(A665) + * 1010 -none- 19(A666) 19(A666) 19(A666) 19(A666) + * 1011 24(888) 24(888) 24(888) 24(888) 24(888) + * 1100 -none- 24(A887) 24(A887) 24(A887) 24(A887) + * 1101 -none- 25(A888) 25(A888) 25(A888) 25(A888) + * 1110 -none- -none- -none- -none- -none- + * 1111 -none- -none- -none- -none- -none- +*/ + +/* FIMD Version 8 register offset definitions */ +#define FIMD_V8_VIDTCON0 (0x20010) +#define FIMD_V8_VIDTCON1 (0x20014) +#define FIMD_V8_VIDTCON2 (0x20018) +#define FIMD_V8_VIDTCON3 (0x2001C) +#define FIMD_V8_VIDCON1 (0x20004) diff --git a/include/xen/Kbuild b/include/xen/Kbuild index 84ad8f02fee..e69de29bb2d 100644 --- a/include/xen/Kbuild +++ b/include/xen/Kbuild @@ -1,2 +0,0 @@ -header-y += evtchn.h -header-y += privcmd.h diff --git a/include/xen/interface/hvm/hvm_op.h b/include/xen/interface/hvm/hvm_op.h index a4827f46ee9..956a0468286 100644 --- a/include/xen/interface/hvm/hvm_op.h +++ b/include/xen/interface/hvm/hvm_op.h @@ -43,4 +43,23 @@ struct xen_hvm_pagetable_dying { typedef struct xen_hvm_pagetable_dying xen_hvm_pagetable_dying_t; DEFINE_GUEST_HANDLE_STRUCT(xen_hvm_pagetable_dying_t); +enum hvmmem_type_t { + HVMMEM_ram_rw, /* Normal read/write guest RAM */ + HVMMEM_ram_ro, /* Read-only; writes are discarded */ + HVMMEM_mmio_dm, /* Reads and write go to the device model */ +}; + +#define HVMOP_get_mem_type 15 +/* Return hvmmem_type_t for the specified pfn. */ +struct xen_hvm_get_mem_type { + /* Domain to be queried. */ + domid_t domid; + /* OUT variable. */ + uint16_t mem_type; + uint16_t pad[2]; /* align next field on 8-byte boundary */ + /* IN variable. */ + uint64_t pfn; +}; +DEFINE_GUEST_HANDLE_STRUCT(xen_hvm_get_mem_type); + #endif /* __XEN_PUBLIC_HVM_HVM_OP_H__ */ |