diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/cpu.h | 1 | ||||
| -rw-r--r-- | include/linux/hardirq.h | 21 | ||||
| -rw-r--r-- | include/linux/rcupdate.h | 115 | ||||
| -rw-r--r-- | include/linux/sched.h | 8 | ||||
| -rw-r--r-- | include/linux/srcu.h | 87 | ||||
| -rw-r--r-- | include/linux/tick.h | 11 | ||||
| -rw-r--r-- | include/trace/events/rcu.h | 122 |
7 files changed, 272 insertions, 93 deletions
diff --git a/include/linux/cpu.h b/include/linux/cpu.h index 6cb60fd2ea8..305c263021e 100644 --- a/include/linux/cpu.h +++ b/include/linux/cpu.h @@ -27,6 +27,7 @@ struct cpu { extern int register_cpu(struct cpu *cpu, int num); extern struct sys_device *get_cpu_sysdev(unsigned cpu); +extern bool cpu_is_hotpluggable(unsigned cpu); extern int cpu_add_sysdev_attr(struct sysdev_attribute *attr); extern void cpu_remove_sysdev_attr(struct sysdev_attribute *attr); diff --git a/include/linux/hardirq.h b/include/linux/hardirq.h index f743883f769..bb7f3097185 100644 --- a/include/linux/hardirq.h +++ b/include/linux/hardirq.h @@ -139,20 +139,7 @@ static inline void account_system_vtime(struct task_struct *tsk) extern void account_system_vtime(struct task_struct *tsk); #endif -#if defined(CONFIG_NO_HZ) #if defined(CONFIG_TINY_RCU) || defined(CONFIG_TINY_PREEMPT_RCU) -extern void rcu_enter_nohz(void); -extern void rcu_exit_nohz(void); - -static inline void rcu_irq_enter(void) -{ - rcu_exit_nohz(); -} - -static inline void rcu_irq_exit(void) -{ - rcu_enter_nohz(); -} static inline void rcu_nmi_enter(void) { @@ -163,17 +150,9 @@ static inline void rcu_nmi_exit(void) } #else -extern void rcu_irq_enter(void); -extern void rcu_irq_exit(void); extern void rcu_nmi_enter(void); extern void rcu_nmi_exit(void); #endif -#else -# define rcu_irq_enter() do { } while (0) -# define rcu_irq_exit() do { } while (0) -# define rcu_nmi_enter() do { } while (0) -# define rcu_nmi_exit() do { } while (0) -#endif /* #if defined(CONFIG_NO_HZ) */ /* * It is safe to do non-atomic ops on ->hardirq_context, diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index 2cf4226ade7..81c04f4348e 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -51,6 +51,8 @@ extern int rcutorture_runnable; /* for sysctl */ #if defined(CONFIG_TREE_RCU) || defined(CONFIG_TREE_PREEMPT_RCU) extern void rcutorture_record_test_transition(void); extern void rcutorture_record_progress(unsigned long vernum); +extern void do_trace_rcu_torture_read(char *rcutorturename, + struct rcu_head *rhp); #else static inline void rcutorture_record_test_transition(void) { @@ -58,6 +60,12 @@ static inline void rcutorture_record_test_transition(void) static inline void rcutorture_record_progress(unsigned long vernum) { } +#ifdef CONFIG_RCU_TRACE +extern void do_trace_rcu_torture_read(char *rcutorturename, + struct rcu_head *rhp); +#else +#define do_trace_rcu_torture_read(rcutorturename, rhp) do { } while (0) +#endif #endif #define UINT_CMP_GE(a, b) (UINT_MAX / 2 >= (a) - (b)) @@ -177,23 +185,10 @@ extern void rcu_sched_qs(int cpu); extern void rcu_bh_qs(int cpu); extern void rcu_check_callbacks(int cpu, int user); struct notifier_block; - -#ifdef CONFIG_NO_HZ - -extern void rcu_enter_nohz(void); -extern void rcu_exit_nohz(void); - -#else /* #ifdef CONFIG_NO_HZ */ - -static inline void rcu_enter_nohz(void) -{ -} - -static inline void rcu_exit_nohz(void) -{ -} - -#endif /* #else #ifdef CONFIG_NO_HZ */ +extern void rcu_idle_enter(void); +extern void rcu_idle_exit(void); +extern void rcu_irq_enter(void); +extern void rcu_irq_exit(void); /* * Infrastructure to implement the synchronize_() primitives in @@ -233,22 +228,30 @@ static inline void destroy_rcu_head_on_stack(struct rcu_head *head) #ifdef CONFIG_DEBUG_LOCK_ALLOC -extern struct lockdep_map rcu_lock_map; -# define rcu_read_acquire() \ - lock_acquire(&rcu_lock_map, 0, 0, 2, 1, NULL, _THIS_IP_) -# define rcu_read_release() lock_release(&rcu_lock_map, 1, _THIS_IP_) +#ifdef CONFIG_PROVE_RCU +extern int rcu_is_cpu_idle(void); +#else /* !CONFIG_PROVE_RCU */ +static inline int rcu_is_cpu_idle(void) +{ + return 0; +} +#endif /* else !CONFIG_PROVE_RCU */ -extern struct lockdep_map rcu_bh_lock_map; -# define rcu_read_acquire_bh() \ - lock_acquire(&rcu_bh_lock_map, 0, 0, 2, 1, NULL, _THIS_IP_) -# define rcu_read_release_bh() lock_release(&rcu_bh_lock_map, 1, _THIS_IP_) +static inline void rcu_lock_acquire(struct lockdep_map *map) +{ + WARN_ON_ONCE(rcu_is_cpu_idle()); + lock_acquire(map, 0, 0, 2, 1, NULL, _THIS_IP_); +} -extern struct lockdep_map rcu_sched_lock_map; -# define rcu_read_acquire_sched() \ - lock_acquire(&rcu_sched_lock_map, 0, 0, 2, 1, NULL, _THIS_IP_) -# define rcu_read_release_sched() \ - lock_release(&rcu_sched_lock_map, 1, _THIS_IP_) +static inline void rcu_lock_release(struct lockdep_map *map) +{ + WARN_ON_ONCE(rcu_is_cpu_idle()); + lock_release(map, 1, _THIS_IP_); +} +extern struct lockdep_map rcu_lock_map; +extern struct lockdep_map rcu_bh_lock_map; +extern struct lockdep_map rcu_sched_lock_map; extern int debug_lockdep_rcu_enabled(void); /** @@ -262,11 +265,18 @@ extern int debug_lockdep_rcu_enabled(void); * * Checks debug_lockdep_rcu_enabled() to prevent false positives during boot * and while lockdep is disabled. + * + * Note that rcu_read_lock() and the matching rcu_read_unlock() must + * occur in the same context, for example, it is illegal to invoke + * rcu_read_unlock() in process context if the matching rcu_read_lock() + * was invoked from within an irq handler. */ static inline int rcu_read_lock_held(void) { if (!debug_lockdep_rcu_enabled()) return 1; + if (rcu_is_cpu_idle()) + return 0; return lock_is_held(&rcu_lock_map); } @@ -290,6 +300,19 @@ extern int rcu_read_lock_bh_held(void); * * Check debug_lockdep_rcu_enabled() to prevent false positives during boot * and while lockdep is disabled. + * + * Note that if the CPU is in the idle loop from an RCU point of + * view (ie: that we are in the section between rcu_idle_enter() and + * rcu_idle_exit()) then rcu_read_lock_held() returns false even if the CPU + * did an rcu_read_lock(). The reason for this is that RCU ignores CPUs + * that are in such a section, considering these as in extended quiescent + * state, so such a CPU is effectively never in an RCU read-side critical + * section regardless of what RCU primitives it invokes. This state of + * affairs is required --- we need to keep an RCU-free window in idle + * where the CPU may possibly enter into low power mode. This way we can + * notice an extended quiescent state to other CPUs that started a grace + * period. Otherwise we would delay any grace period as long as we run in + * the idle task. */ #ifdef CONFIG_PREEMPT_COUNT static inline int rcu_read_lock_sched_held(void) @@ -298,6 +321,8 @@ static inline int rcu_read_lock_sched_held(void) if (!debug_lockdep_rcu_enabled()) return 1; + if (rcu_is_cpu_idle()) + return 0; if (debug_locks) lockdep_opinion = lock_is_held(&rcu_sched_lock_map); return lockdep_opinion || preempt_count() != 0 || irqs_disabled(); @@ -311,12 +336,8 @@ static inline int rcu_read_lock_sched_held(void) #else /* #ifdef CONFIG_DEBUG_LOCK_ALLOC */ -# define rcu_read_acquire() do { } while (0) -# define rcu_read_release() do { } while (0) -# define rcu_read_acquire_bh() do { } while (0) -# define rcu_read_release_bh() do { } while (0) -# define rcu_read_acquire_sched() do { } while (0) -# define rcu_read_release_sched() do { } while (0) +# define rcu_lock_acquire(a) do { } while (0) +# define rcu_lock_release(a) do { } while (0) static inline int rcu_read_lock_held(void) { @@ -637,7 +658,7 @@ static inline void rcu_read_lock(void) { __rcu_read_lock(); __acquire(RCU); - rcu_read_acquire(); + rcu_lock_acquire(&rcu_lock_map); } /* @@ -657,7 +678,7 @@ static inline void rcu_read_lock(void) */ static inline void rcu_read_unlock(void) { - rcu_read_release(); + rcu_lock_release(&rcu_lock_map); __release(RCU); __rcu_read_unlock(); } @@ -673,12 +694,17 @@ static inline void rcu_read_unlock(void) * critical sections in interrupt context can use just rcu_read_lock(), * though this should at least be commented to avoid confusing people * reading the code. + * + * Note that rcu_read_lock_bh() and the matching rcu_read_unlock_bh() + * must occur in the same context, for example, it is illegal to invoke + * rcu_read_unlock_bh() from one task if the matching rcu_read_lock_bh() + * was invoked from some other task. */ static inline void rcu_read_lock_bh(void) { local_bh_disable(); __acquire(RCU_BH); - rcu_read_acquire_bh(); + rcu_lock_acquire(&rcu_bh_lock_map); } /* @@ -688,7 +714,7 @@ static inline void rcu_read_lock_bh(void) */ static inline void rcu_read_unlock_bh(void) { - rcu_read_release_bh(); + rcu_lock_release(&rcu_bh_lock_map); __release(RCU_BH); local_bh_enable(); } @@ -700,12 +726,17 @@ static inline void rcu_read_unlock_bh(void) * are being done using call_rcu_sched() or synchronize_rcu_sched(). * Read-side critical sections can also be introduced by anything that * disables preemption, including local_irq_disable() and friends. + * + * Note that rcu_read_lock_sched() and the matching rcu_read_unlock_sched() + * must occur in the same context, for example, it is illegal to invoke + * rcu_read_unlock_sched() from process context if the matching + * rcu_read_lock_sched() was invoked from an NMI handler. */ static inline void rcu_read_lock_sched(void) { preempt_disable(); __acquire(RCU_SCHED); - rcu_read_acquire_sched(); + rcu_lock_acquire(&rcu_sched_lock_map); } /* Used by lockdep and tracing: cannot be traced, cannot call lockdep. */ @@ -722,7 +753,7 @@ static inline notrace void rcu_read_lock_sched_notrace(void) */ static inline void rcu_read_unlock_sched(void) { - rcu_read_release_sched(); + rcu_lock_release(&rcu_sched_lock_map); __release(RCU_SCHED); preempt_enable(); } diff --git a/include/linux/sched.h b/include/linux/sched.h index 1c4f3e9b9bc..4a7e4d333a2 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -2070,6 +2070,14 @@ extern int sched_setscheduler(struct task_struct *, int, extern int sched_setscheduler_nocheck(struct task_struct *, int, const struct sched_param *); extern struct task_struct *idle_task(int cpu); +/** + * is_idle_task - is the specified task an idle task? + * @tsk: the task in question. + */ +static inline bool is_idle_task(struct task_struct *p) +{ + return p->pid == 0; +} extern struct task_struct *curr_task(int cpu); extern void set_curr_task(int cpu, struct task_struct *p); diff --git a/include/linux/srcu.h b/include/linux/srcu.h index 58971e891f4..e1b005918bb 100644 --- a/include/linux/srcu.h +++ b/include/linux/srcu.h @@ -28,6 +28,7 @@ #define _LINUX_SRCU_H #include <linux/mutex.h> +#include <linux/rcupdate.h> struct srcu_struct_array { int c[2]; @@ -60,18 +61,10 @@ int __init_srcu_struct(struct srcu_struct *sp, const char *name, __init_srcu_struct((sp), #sp, &__srcu_key); \ }) -# define srcu_read_acquire(sp) \ - lock_acquire(&(sp)->dep_map, 0, 0, 2, 1, NULL, _THIS_IP_) -# define srcu_read_release(sp) \ - lock_release(&(sp)->dep_map, 1, _THIS_IP_) - #else /* #ifdef CONFIG_DEBUG_LOCK_ALLOC */ int init_srcu_struct(struct srcu_struct *sp); -# define srcu_read_acquire(sp) do { } while (0) -# define srcu_read_release(sp) do { } while (0) - #endif /* #else #ifdef CONFIG_DEBUG_LOCK_ALLOC */ void cleanup_srcu_struct(struct srcu_struct *sp); @@ -90,12 +83,32 @@ long srcu_batches_completed(struct srcu_struct *sp); * read-side critical section. In absence of CONFIG_DEBUG_LOCK_ALLOC, * this assumes we are in an SRCU read-side critical section unless it can * prove otherwise. + * + * Checks debug_lockdep_rcu_enabled() to prevent false positives during boot + * and while lockdep is disabled. + * + * Note that if the CPU is in the idle loop from an RCU point of view + * (ie: that we are in the section between rcu_idle_enter() and + * rcu_idle_exit()) then srcu_read_lock_held() returns false even if + * the CPU did an srcu_read_lock(). The reason for this is that RCU + * ignores CPUs that are in such a section, considering these as in + * extended quiescent state, so such a CPU is effectively never in an + * RCU read-side critical section regardless of what RCU primitives it + * invokes. This state of affairs is required --- we need to keep an + * RCU-free window in idle where the CPU may possibly enter into low + * power mode. This way we can notice an extended quiescent state to + * other CPUs that started a grace period. Otherwise we would delay any + * grace period as long as we run in the idle task. */ static inline int srcu_read_lock_held(struct srcu_struct *sp) { - if (debug_locks) - return lock_is_held(&sp->dep_map); - return 1; + if (rcu_is_cpu_idle()) + return 0; + + if (!debug_lockdep_rcu_enabled()) + return 1; + + return lock_is_held(&sp->dep_map); } #else /* #ifdef CONFIG_DEBUG_LOCK_ALLOC */ @@ -145,12 +158,17 @@ static inline int srcu_read_lock_held(struct srcu_struct *sp) * one way to indirectly wait on an SRCU grace period is to acquire * a mutex that is held elsewhere while calling synchronize_srcu() or * synchronize_srcu_expedited(). + * + * Note that srcu_read_lock() and the matching srcu_read_unlock() must + * occur in the same context, for example, it is illegal to invoke + * srcu_read_unlock() in an irq handler if the matching srcu_read_lock() + * was invoked in process context. */ static inline int srcu_read_lock(struct srcu_struct *sp) __acquires(sp) { int retval = __srcu_read_lock(sp); - srcu_read_acquire(sp); + rcu_lock_acquire(&(sp)->dep_map); return retval; } @@ -164,8 +182,51 @@ static inline int srcu_read_lock(struct srcu_struct *sp) __acquires(sp) static inline void srcu_read_unlock(struct srcu_struct *sp, int idx) __releases(sp) { - srcu_read_release(sp); + rcu_lock_release(&(sp)->dep_map); + __srcu_read_unlock(sp, idx); +} + +/** + * srcu_read_lock_raw - register a new reader for an SRCU-protected structure. + * @sp: srcu_struct in which to register the new reader. + * + * Enter an SRCU read-side critical section. Similar to srcu_read_lock(), + * but avoids the RCU-lockdep checking. This means that it is legal to + * use srcu_read_lock_raw() in one context, for example, in an exception + * handler, and then have the matching srcu_read_unlock_raw() in another + * context, for example in the task that took the exception. + * + * However, the entire SRCU read-side critical section must reside within a + * single task. For example, beware of using srcu_read_lock_raw() in + * a device interrupt handler and srcu_read_unlock() in the interrupted + * task: This will not work if interrupts are threaded. + */ +static inline int srcu_read_lock_raw(struct srcu_struct *sp) +{ + unsigned long flags; + int ret; + + local_irq_save(flags); + ret = __srcu_read_lock(sp); + local_irq_restore(flags); + return ret; +} + +/** + * srcu_read_unlock_raw - unregister reader from an SRCU-protected structure. + * @sp: srcu_struct in which to unregister the old reader. + * @idx: return value from corresponding srcu_read_lock_raw(). + * + * Exit an SRCU read-side critical section without lockdep-RCU checking. + * See srcu_read_lock_raw() for more details. + */ +static inline void srcu_read_unlock_raw(struct srcu_struct *sp, int idx) +{ + unsigned long flags; + + local_irq_save(flags); __srcu_read_unlock(sp, idx); + local_irq_restore(flags); } #endif diff --git a/include/linux/tick.h b/include/linux/tick.h index b232ccc0ee2..ab8be90b5cc 100644 --- a/include/linux/tick.h +++ b/include/linux/tick.h @@ -7,6 +7,7 @@ #define _LINUX_TICK_H #include <linux/clockchips.h> +#include <linux/irqflags.h> #ifdef CONFIG_GENERIC_CLOCKEVENTS @@ -121,14 +122,16 @@ static inline int tick_oneshot_mode_active(void) { return 0; } #endif /* !CONFIG_GENERIC_CLOCKEVENTS */ # ifdef CONFIG_NO_HZ -extern void tick_nohz_stop_sched_tick(int inidle); -extern void tick_nohz_restart_sched_tick(void); +extern void tick_nohz_idle_enter(void); +extern void tick_nohz_idle_exit(void); +extern void tick_nohz_irq_exit(void); extern ktime_t tick_nohz_get_sleep_length(void); extern u64 get_cpu_idle_time_us(int cpu, u64 *last_update_time); extern u64 get_cpu_iowait_time_us(int cpu, u64 *last_update_time); # else -static inline void tick_nohz_stop_sched_tick(int inidle) { } -static inline void tick_nohz_restart_sched_tick(void) { } +static inline void tick_nohz_idle_enter(void) { } +static inline void tick_nohz_idle_exit(void) { } + static inline ktime_t tick_nohz_get_sleep_length(void) { ktime_t len = { .tv64 = NSEC_PER_SEC/HZ }; diff --git a/include/trace/events/rcu.h b/include/trace/events/rcu.h index 669fbd62ec2..d2d88bed891 100644 --- a/include/trace/events/rcu.h +++ b/include/trace/events/rcu.h @@ -241,24 +241,73 @@ TRACE_EVENT(rcu_fqs, /* * Tracepoint for dyntick-idle entry/exit events. These take a string - * as argument: "Start" for entering dyntick-idle mode and "End" for - * leaving it. + * as argument: "Start" for entering dyntick-idle mode, "End" for + * leaving it, "--=" for events moving towards idle, and "++=" for events + * moving away from idle. "Error on entry: not idle task" and "Error on + * exit: not idle task" indicate that a non-idle task is erroneously + * toying with the idle loop. + * + * These events also take a pair of numbers, which indicate the nesting + * depth before and after the event of interest. Note that task-related + * events use the upper bits of each number, while interrupt-related + * events use the lower bits. */ TRACE_EVENT(rcu_dyntick, - TP_PROTO(char *polarity), + TP_PROTO(char *polarity, long long oldnesting, long long newnesting), - TP_ARGS(polarity), + TP_ARGS(polarity, oldnesting, newnesting), TP_STRUCT__entry( __field(char *, polarity) + __field(long long, oldnesting) + __field(long long, newnesting) ), TP_fast_assign( __entry->polarity = polarity; + __entry->oldnesting = oldnesting; + __entry->newnesting = newnesting; + ), + + TP_printk("%s %llx %llx", __entry->polarity, + __entry->oldnesting, __entry->newnesting) +); + +/* + * Tracepoint for RCU preparation for idle, the goal being to get RCU + * processing done so that the current CPU can shut off its scheduling + * clock and enter dyntick-idle mode. One way to accomplish this is + * to drain all RCU callbacks from this CPU, and the other is to have + * done everything RCU requires for the current grace period. In this + * latter case, the CPU will be awakened at the end of the current grace + * period in order to process the remainder of its callbacks. + * + * These tracepoints take a string as argument: + * + * "No callbacks": Nothing to do, no callbacks on this CPU. + * "In holdoff": Nothing to do, holding off after unsuccessful attempt. + * "Begin holdoff": Attempt failed, don't retry until next jiffy. + * "Dyntick with callbacks": Entering dyntick-idle despite callbacks. + * "More callbacks": Still more callbacks, try again to clear them out. + * "Callbacks drained": All callbacks processed, off to dyntick idle! + * "Timer": Timer fired to cause CPU to continue processing callbacks. + */ +TRACE_EVENT(rcu_prep_idle, + + TP_PROTO(char *reason), + + TP_ARGS(reason), + + TP_STRUCT__entry( + __field(char *, reason) + ), + + TP_fast_assign( + __entry->reason = reason; ), - TP_printk("%s", __entry->polarity) + TP_printk("%s", __entry->reason) ); /* @@ -412,27 +461,71 @@ TRACE_EVENT(rcu_invoke_kfree_callback, /* * Tracepoint for exiting rcu_do_batch after RCU callbacks have been - * invoked. The first argument is the name of the RCU flavor and - * the second argument is number of callbacks actually invoked. + * invoked. The first argument is the name of the RCU flavor, + * the second argument is number of callbacks actually invoked, + * the third argument (cb) is whether or not any of the callbacks that + * were ready to invoke at the beginning of this batch are still + * queued, the fourth argument (nr) is the return value of need_resched(), + * the fifth argument (iit) is 1 if the current task is the idle task, + * and the sixth argument (risk) is the return value from + * rcu_is_callbacks_kthread(). */ TRACE_EVENT(rcu_batch_end, - TP_PROTO(char *rcuname, int callbacks_invoked), + TP_PROTO(char *rcuname, int callbacks_invoked, + bool cb, bool nr, bool iit, bool risk), - TP_ARGS(rcuname, callbacks_invoked), + TP_ARGS(rcuname, callbacks_invoked, cb, nr, iit, risk), TP_STRUCT__entry( __field(char *, rcuname) __field(int, callbacks_invoked) + __field(bool, cb) + __field(bool, nr) + __field(bool, iit) + __field(bool, risk) ), TP_fast_assign( __entry->rcuname = rcuname; __entry->callbacks_invoked = callbacks_invoked; + __entry->cb = cb; + __entry->nr = nr; + __entry->iit = iit; + __entry->risk = risk; + ), + + TP_printk("%s CBs-invoked=%d idle=%c%c%c%c", + __entry->rcuname, __entry->callbacks_invoked, + __entry->cb ? 'C' : '.', + __entry->nr ? 'S' : '.', + __entry->iit ? 'I' : '.', + __entry->risk ? 'R' : '.') +); + +/* + * Tracepoint for rcutorture readers. The first argument is the name + * of the RCU flavor from rcutorture's viewpoint and the second argument + * is the callback address. + */ +TRACE_EVENT(rcu_torture_read, + + TP_PROTO(char *rcutorturename, struct rcu_head *rhp), + + TP_ARGS(rcutorturename, rhp), + + TP_STRUCT__entry( + __field(char *, rcutorturename) + __field(struct rcu_head *, rhp) + ), + + TP_fast_assign( + __entry->rcutorturename = rcutorturename; + __entry->rhp = rhp; ), - TP_printk("%s CBs-invoked=%d", - __entry->rcuname, __entry->callbacks_invoked) + TP_printk("%s torture read %p", + __entry->rcutorturename, __entry->rhp) ); #else /* #ifdef CONFIG_RCU_TRACE */ @@ -443,13 +536,16 @@ TRACE_EVENT(rcu_batch_end, #define trace_rcu_unlock_preempted_task(rcuname, gpnum, pid) do { } while (0) #define trace_rcu_quiescent_state_report(rcuname, gpnum, mask, qsmask, level, grplo, grphi, gp_tasks) do { } while (0) #define trace_rcu_fqs(rcuname, gpnum, cpu, qsevent) do { } while (0) -#define trace_rcu_dyntick(polarity) do { } while (0) +#define trace_rcu_dyntick(polarity, oldnesting, newnesting) do { } while (0) +#define trace_rcu_prep_idle(reason) do { } while (0) #define trace_rcu_callback(rcuname, rhp, qlen) do { } while (0) #define trace_rcu_kfree_callback(rcuname, rhp, offset, qlen) do { } while (0) #define trace_rcu_batch_start(rcuname, qlen, blimit) do { } while (0) #define trace_rcu_invoke_callback(rcuname, rhp) do { } while (0) #define trace_rcu_invoke_kfree_callback(rcuname, rhp, offset) do { } while (0) -#define trace_rcu_batch_end(rcuname, callbacks_invoked) do { } while (0) +#define trace_rcu_batch_end(rcuname, callbacks_invoked, cb, nr, iit, risk) \ + do { } while (0) +#define trace_rcu_torture_read(rcutorturename, rhp) do { } while (0) #endif /* #else #ifdef CONFIG_RCU_TRACE */ |