diff options
Diffstat (limited to 'include/uapi/linux/nl80211.h')
| -rw-r--r-- | include/uapi/linux/nl80211.h | 37 |
1 files changed, 37 insertions, 0 deletions
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index d1e48b5e348..861e5eba395 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -27,6 +27,8 @@ #include <linux/types.h> +#define NL80211_GENL_NAME "nl80211" + /** * DOC: Station handling * @@ -1429,6 +1431,11 @@ enum nl80211_commands { * @NL80211_ATTR_MAX_CRIT_PROT_DURATION: duration in milliseconds in which * the connection should have increased reliability (u16). * + * @NL80211_ATTR_PEER_AID: Association ID for the peer TDLS station (u16). + * This is similar to @NL80211_ATTR_STA_AID but with a difference of being + * allowed to be used with the first @NL80211_CMD_SET_STATION command to + * update a TDLS peer STA entry. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1727,6 +1734,8 @@ enum nl80211_attrs { NL80211_ATTR_CRIT_PROT_ID, NL80211_ATTR_MAX_CRIT_PROT_DURATION, + NL80211_ATTR_PEER_AID, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -1991,6 +2000,10 @@ enum nl80211_sta_bss_param { * @NL80211_STA_INFO_PEER_PM: peer mesh STA link-specific power mode * @NL80211_STA_INFO_NONPEER_PM: neighbor mesh STA power save mode towards * non-peer STA + * @NL80211_STA_INFO_CHAIN_SIGNAL: per-chain signal strength of last PPDU + * Contains a nested array of signal strength attributes (u8, dBm) + * @NL80211_STA_INFO_CHAIN_SIGNAL_AVG: per-chain signal strength average + * Same format as NL80211_STA_INFO_CHAIN_SIGNAL. * @__NL80211_STA_INFO_AFTER_LAST: internal * @NL80211_STA_INFO_MAX: highest possible station info attribute */ @@ -2020,6 +2033,8 @@ enum nl80211_sta_info { NL80211_STA_INFO_NONPEER_PM, NL80211_STA_INFO_RX_BYTES64, NL80211_STA_INFO_TX_BYTES64, + NL80211_STA_INFO_CHAIN_SIGNAL, + NL80211_STA_INFO_CHAIN_SIGNAL_AVG, /* keep last */ __NL80211_STA_INFO_AFTER_LAST, @@ -2413,6 +2428,8 @@ enum nl80211_survey_info { * @NL80211_MNTR_FLAG_OTHER_BSS: disable BSSID filtering * @NL80211_MNTR_FLAG_COOK_FRAMES: report frames after processing. * overrides all other flags. + * @NL80211_MNTR_FLAG_ACTIVE: use the configured MAC address + * and ACK incoming unicast packets. * * @__NL80211_MNTR_FLAG_AFTER_LAST: internal use * @NL80211_MNTR_FLAG_MAX: highest possible monitor flag @@ -2424,6 +2441,7 @@ enum nl80211_mntr_flags { NL80211_MNTR_FLAG_CONTROL, NL80211_MNTR_FLAG_OTHER_BSS, NL80211_MNTR_FLAG_COOK_FRAMES, + NL80211_MNTR_FLAG_ACTIVE, /* keep last */ __NL80211_MNTR_FLAG_AFTER_LAST, @@ -2559,6 +2577,10 @@ enum nl80211_mesh_power_mode { * * @NL80211_MESHCONF_AWAKE_WINDOW: awake window duration (in TUs) * + * @NL80211_MESHCONF_PLINK_TIMEOUT: If no tx activity is seen from a STA we've + * established peering with for longer than this time (in seconds), then + * remove it from the STA's list of peers. Default is 30 minutes. + * * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use */ enum nl80211_meshconf_params { @@ -2590,6 +2612,7 @@ enum nl80211_meshconf_params { NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL, NL80211_MESHCONF_POWER_MODE, NL80211_MESHCONF_AWAKE_WINDOW, + NL80211_MESHCONF_PLINK_TIMEOUT, /* keep last */ __NL80211_MESHCONF_ATTR_AFTER_LAST, @@ -2637,6 +2660,10 @@ enum nl80211_meshconf_params { * @NL80211_MESH_SETUP_USERSPACE_MPM: Enable this option if userspace will * implement an MPM which handles peer allocation and state. * + * @NL80211_MESH_SETUP_AUTH_PROTOCOL: Inform the kernel of the authentication + * method (u8, as defined in IEEE 8.4.2.100.6, e.g. 0x1 for SAE). + * Default is no authentication method required. + * * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number * * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use @@ -2650,6 +2677,7 @@ enum nl80211_mesh_setup_params { NL80211_MESH_SETUP_USERSPACE_AMPE, NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC, NL80211_MESH_SETUP_USERSPACE_MPM, + NL80211_MESH_SETUP_AUTH_PROTOCOL, /* keep last */ __NL80211_MESH_SETUP_ATTR_AFTER_LAST, @@ -2730,6 +2758,8 @@ enum nl80211_channel_type { * and %NL80211_ATTR_CENTER_FREQ2 attributes must be provided as well * @NL80211_CHAN_WIDTH_160: 160 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 * attribute must be provided as well + * @NL80211_CHAN_WIDTH_5: 5 MHz OFDM channel + * @NL80211_CHAN_WIDTH_10: 10 MHz OFDM channel */ enum nl80211_chan_width { NL80211_CHAN_WIDTH_20_NOHT, @@ -2738,6 +2768,8 @@ enum nl80211_chan_width { NL80211_CHAN_WIDTH_80, NL80211_CHAN_WIDTH_80P80, NL80211_CHAN_WIDTH_160, + NL80211_CHAN_WIDTH_5, + NL80211_CHAN_WIDTH_10, }; /** @@ -3556,6 +3588,10 @@ enum nl80211_ap_sme_features { * Peering Management entity which may be implemented by registering for * beacons or NL80211_CMD_NEW_PEER_CANDIDATE events. The mesh beacon is * still generated by the driver. + * @NL80211_FEATURE_ACTIVE_MONITOR: This driver supports an active monitor + * interface. An active monitor interface behaves like a normal monitor + * interface, but gets added to the driver. It ensures that incoming + * unicast packets directed at the configured interface address get ACKed. */ enum nl80211_feature_flags { NL80211_FEATURE_SK_TX_STATUS = 1 << 0, @@ -3575,6 +3611,7 @@ enum nl80211_feature_flags { NL80211_FEATURE_ADVERTISE_CHAN_LIMITS = 1 << 14, NL80211_FEATURE_FULL_AP_CLIENT_STATE = 1 << 15, NL80211_FEATURE_USERSPACE_MPM = 1 << 16, + NL80211_FEATURE_ACTIVE_MONITOR = 1 << 17, }; /** |