diff options
Diffstat (limited to 'include/net/mac80211.h')
| -rw-r--r-- | include/net/mac80211.h | 62 |
1 files changed, 53 insertions, 9 deletions
diff --git a/include/net/mac80211.h b/include/net/mac80211.h index bd3487d5ac8..d49928ba5d0 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -166,6 +166,7 @@ struct ieee80211_low_level_stats { * that it is only ever disabled for station mode. * @BSS_CHANGED_IDLE: Idle changed for this BSS/interface. * @BSS_CHANGED_SSID: SSID changed for this BSS (AP mode) + * @BSS_CHANGED_AP_PROBE_RESP: Probe Response changed for this BSS (AP mode) */ enum ieee80211_bss_change { BSS_CHANGED_ASSOC = 1<<0, @@ -184,6 +185,7 @@ enum ieee80211_bss_change { BSS_CHANGED_QOS = 1<<13, BSS_CHANGED_IDLE = 1<<14, BSS_CHANGED_SSID = 1<<15, + BSS_CHANGED_AP_PROBE_RESP = 1<<16, /* when adding here, make sure to change ieee80211_reconfig */ }; @@ -518,7 +520,7 @@ struct ieee80211_tx_rate { * @flags: transmit info flags, defined above * @band: the band to transmit on (use for checking for races) * @antenna_sel_tx: antenna to use, 0 for automatic diversity - * @pad: padding, ignore + * @ack_frame_id: internal frame ID for TX status, used internally * @control: union for control data * @status: union for status data * @driver_data: array of driver_data pointers @@ -535,8 +537,7 @@ struct ieee80211_tx_info { u8 antenna_sel_tx; - /* 2 byte hole */ - u8 pad[2]; + u16 ack_frame_id; union { struct { @@ -901,6 +902,10 @@ static inline bool ieee80211_vif_is_mesh(struct ieee80211_vif *vif) * @IEEE80211_KEY_FLAG_SW_MGMT: This flag should be set by the driver for a * CCMP key if it requires CCMP encryption of management frames (MFP) to * be done in software. + * @IEEE80211_KEY_FLAG_PUT_IV_SPACE: This flag should be set by the driver + * for a CCMP key if space should be prepared for the IV, but the IV + * itself should not be generated. Do not set together with + * @IEEE80211_KEY_FLAG_GENERATE_IV on the same key. */ enum ieee80211_key_flags { IEEE80211_KEY_FLAG_WMM_STA = 1<<0, @@ -908,6 +913,7 @@ enum ieee80211_key_flags { IEEE80211_KEY_FLAG_GENERATE_MMIC= 1<<2, IEEE80211_KEY_FLAG_PAIRWISE = 1<<3, IEEE80211_KEY_FLAG_SW_MGMT = 1<<4, + IEEE80211_KEY_FLAG_PUT_IV_SPACE = 1<<5, }; /** @@ -1304,6 +1310,16 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw, } /** + * ieee80211_free_txskb - free TX skb + * @hw: the hardware + * @skb: the skb + * + * Free a transmit skb. Use this funtion when some failure + * to transmit happened and thus status cannot be reported. + */ +void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb); + +/** * DOC: Hardware crypto acceleration * * mac80211 is capable of taking advantage of many hardware @@ -1744,11 +1760,21 @@ enum ieee80211_frame_release_type { * skb contains the buffer starting from the IEEE 802.11 header. * The low-level driver should send the frame out based on * configuration in the TX control data. This handler should, - * preferably, never fail and stop queues appropriately, more - * importantly, however, it must never fail for A-MPDU-queues. - * This function should return NETDEV_TX_OK except in very - * limited cases. - * Must be implemented and atomic. + * preferably, never fail and stop queues appropriately. + * This must be implemented if @tx_frags is not. + * Must be atomic. + * + * @tx_frags: Called to transmit multiple fragments of a single MSDU. + * This handler must consume all fragments, sending out some of + * them only is useless and it can't ask for some of them to be + * queued again. If the frame is not fragmented the queue has a + * single SKB only. To avoid issues with the networking stack + * when TX status is reported the frames should be removed from + * the skb queue. + * If this is used, the tx_info @vif and @sta pointers will be + * invalid -- you must not use them in that case. + * This must be implemented if @tx isn't. + * Must be atomic. * * @start: Called before the first netdevice attached to the hardware * is enabled. This should turn on the hardware and must turn on @@ -2085,6 +2111,8 @@ enum ieee80211_frame_release_type { */ struct ieee80211_ops { void (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb); + void (*tx_frags)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + struct ieee80211_sta *sta, struct sk_buff_head *skbs); int (*start)(struct ieee80211_hw *hw); void (*stop)(struct ieee80211_hw *hw); #ifdef CONFIG_PM @@ -2661,6 +2689,19 @@ static inline struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, } /** + * ieee80211_proberesp_get - retrieve a Probe Response template + * @hw: pointer obtained from ieee80211_alloc_hw(). + * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * + * Creates a Probe Response template which can, for example, be uploaded to + * hardware. The destination address should be set by the caller. + * + * Can only be called in AP mode. + */ +struct sk_buff *ieee80211_proberesp_get(struct ieee80211_hw *hw, + struct ieee80211_vif *vif); + +/** * ieee80211_pspoll_get - retrieve a PS Poll template * @hw: pointer obtained from ieee80211_alloc_hw(). * @vif: &struct ieee80211_vif pointer from the add_interface callback. @@ -3461,9 +3502,12 @@ void ieee80211_send_bar(struct ieee80211_vif *vif, u8 *ra, u16 tid, u16 ssn); * * @IEEE80211_RC_HT_CHANGED: The HT parameters of the operating channel have * changed, rate control algorithm can update its internal state if needed. + * @IEEE80211_RC_SMPS_CHANGED: The SMPS state of the station changed, the rate + * control algorithm needs to adjust accordingly. */ enum rate_control_changed { - IEEE80211_RC_HT_CHANGED = BIT(0) + IEEE80211_RC_HT_CHANGED = BIT(0), + IEEE80211_RC_SMPS_CHANGED = BIT(1), }; /** |