diff options
Diffstat (limited to 'include/mtd/mtd-abi.h')
| -rw-r--r-- | include/mtd/mtd-abi.h | 103 |
1 files changed, 103 insertions, 0 deletions
diff --git a/include/mtd/mtd-abi.h b/include/mtd/mtd-abi.h new file mode 100644 index 00000000000..a76ab898f44 --- /dev/null +++ b/include/mtd/mtd-abi.h @@ -0,0 +1,103 @@ +/* + * $Id: mtd-abi.h,v 1.7 2004/11/23 15:37:32 gleixner Exp $ + * + * Portions of MTD ABI definition which are shared by kernel and user space + */ + +#ifndef __MTD_ABI_H__ +#define __MTD_ABI_H__ + +#ifndef __KERNEL__ /* Urgh. The whole point of splitting this out into + separate files was to avoid #ifdef __KERNEL__ */ +#define __user +#endif + +struct erase_info_user { + uint32_t start; + uint32_t length; +}; + +struct mtd_oob_buf { + uint32_t start; + uint32_t length; + unsigned char __user *ptr; +}; + +#define MTD_ABSENT 0 +#define MTD_RAM 1 +#define MTD_ROM 2 +#define MTD_NORFLASH 3 +#define MTD_NANDFLASH 4 +#define MTD_PEROM 5 +#define MTD_OTHER 14 +#define MTD_UNKNOWN 15 + +#define MTD_CLEAR_BITS 1 // Bits can be cleared (flash) +#define MTD_SET_BITS 2 // Bits can be set +#define MTD_ERASEABLE 4 // Has an erase function +#define MTD_WRITEB_WRITEABLE 8 // Direct IO is possible +#define MTD_VOLATILE 16 // Set for RAMs +#define MTD_XIP 32 // eXecute-In-Place possible +#define MTD_OOB 64 // Out-of-band data (NAND flash) +#define MTD_ECC 128 // Device capable of automatic ECC +#define MTD_NO_VIRTBLOCKS 256 // Virtual blocks not allowed + +// Some common devices / combinations of capabilities +#define MTD_CAP_ROM 0 +#define MTD_CAP_RAM (MTD_CLEAR_BITS|MTD_SET_BITS|MTD_WRITEB_WRITEABLE) +#define MTD_CAP_NORFLASH (MTD_CLEAR_BITS|MTD_ERASEABLE) +#define MTD_CAP_NANDFLASH (MTD_CLEAR_BITS|MTD_ERASEABLE|MTD_OOB) +#define MTD_WRITEABLE (MTD_CLEAR_BITS|MTD_SET_BITS) + + +// Types of automatic ECC/Checksum available +#define MTD_ECC_NONE 0 // No automatic ECC available +#define MTD_ECC_RS_DiskOnChip 1 // Automatic ECC on DiskOnChip +#define MTD_ECC_SW 2 // SW ECC for Toshiba & Samsung devices + +/* ECC byte placement */ +#define MTD_NANDECC_OFF 0 // Switch off ECC (Not recommended) +#define MTD_NANDECC_PLACE 1 // Use the given placement in the structure (YAFFS1 legacy mode) +#define MTD_NANDECC_AUTOPLACE 2 // Use the default placement scheme +#define MTD_NANDECC_PLACEONLY 3 // Use the given placement in the structure (Do not store ecc result on read) + +struct mtd_info_user { + uint8_t type; + uint32_t flags; + uint32_t size; // Total size of the MTD + uint32_t erasesize; + uint32_t oobblock; // Size of OOB blocks (e.g. 512) + uint32_t oobsize; // Amount of OOB data per block (e.g. 16) + uint32_t ecctype; + uint32_t eccsize; +}; + +struct region_info_user { + uint32_t offset; /* At which this region starts, + * from the beginning of the MTD */ + uint32_t erasesize; /* For this region */ + uint32_t numblocks; /* Number of blocks in this region */ + uint32_t regionindex; +}; + +#define MEMGETINFO _IOR('M', 1, struct mtd_info_user) +#define MEMERASE _IOW('M', 2, struct erase_info_user) +#define MEMWRITEOOB _IOWR('M', 3, struct mtd_oob_buf) +#define MEMREADOOB _IOWR('M', 4, struct mtd_oob_buf) +#define MEMLOCK _IOW('M', 5, struct erase_info_user) +#define MEMUNLOCK _IOW('M', 6, struct erase_info_user) +#define MEMGETREGIONCOUNT _IOR('M', 7, int) +#define MEMGETREGIONINFO _IOWR('M', 8, struct region_info_user) +#define MEMSETOOBSEL _IOW('M', 9, struct nand_oobinfo) +#define MEMGETOOBSEL _IOR('M', 10, struct nand_oobinfo) +#define MEMGETBADBLOCK _IOW('M', 11, loff_t) +#define MEMSETBADBLOCK _IOW('M', 12, loff_t) + +struct nand_oobinfo { + uint32_t useecc; + uint32_t eccbytes; + uint32_t oobfree[8][2]; + uint32_t eccpos[32]; +}; + +#endif /* __MTD_ABI_H__ */ |