diff options
Diffstat (limited to 'include/media')
| -rw-r--r-- | include/media/ir-core.h | 8 | ||||
| -rw-r--r-- | include/media/ir-kbd-i2c.h | 2 | ||||
| -rw-r--r-- | include/media/lirc.h | 165 | ||||
| -rw-r--r-- | include/media/lirc_dev.h | 225 | ||||
| -rw-r--r-- | include/media/rc-map.h | 10 | ||||
| -rw-r--r-- | include/media/sh_mobile_ceu.h | 3 | ||||
| -rw-r--r-- | include/media/sh_mobile_csi2.h | 46 | ||||
| -rw-r--r-- | include/media/soc_camera.h | 3 | ||||
| -rw-r--r-- | include/media/v4l2-mediabus.h | 13 | ||||
| -rw-r--r-- | include/media/videobuf-core.h | 6 | ||||
| -rw-r--r-- | include/media/videobuf-dma-sg.h | 39 | ||||
| -rw-r--r-- | include/media/videobuf-vmalloc.h | 2 |
12 files changed, 485 insertions, 37 deletions
diff --git a/include/media/ir-core.h b/include/media/ir-core.h index ad1303f20e0..513e60dd101 100644 --- a/include/media/ir-core.h +++ b/include/media/ir-core.h @@ -47,15 +47,21 @@ enum rc_driver_type { * is opened. * @close: callback to allow drivers to disable polling/irq when IR input device * is opened. + * @s_tx_mask: set transmitter mask (for devices with multiple tx outputs) + * @s_tx_carrier: set transmit carrier frequency + * @tx_ir: transmit IR */ struct ir_dev_props { enum rc_driver_type driver_type; unsigned long allowed_protos; u32 scanmask; - void *priv; + void *priv; int (*change_protocol)(void *priv, u64 ir_type); int (*open)(void *priv); void (*close)(void *priv); + int (*s_tx_mask)(void *priv, u32 mask); + int (*s_tx_carrier)(void *priv, u32 carrier); + int (*tx_ir)(void *priv, int *txbuf, u32 n); }; struct ir_input_dev { diff --git a/include/media/ir-kbd-i2c.h b/include/media/ir-kbd-i2c.h index 0506e45c9a4..5e96d7a430b 100644 --- a/include/media/ir-kbd-i2c.h +++ b/include/media/ir-kbd-i2c.h @@ -11,7 +11,7 @@ struct IR_i2c { struct i2c_client *c; struct input_dev *input; struct ir_input_state ir; - + u64 ir_type; /* Used to avoid fast repeating */ unsigned char old; diff --git a/include/media/lirc.h b/include/media/lirc.h new file mode 100644 index 00000000000..42c467c5051 --- /dev/null +++ b/include/media/lirc.h @@ -0,0 +1,165 @@ +/* + * lirc.h - linux infrared remote control header file + * last modified 2010/07/13 by Jarod Wilson + */ + +#ifndef _LINUX_LIRC_H +#define _LINUX_LIRC_H + +#include <linux/types.h> +#include <linux/ioctl.h> + +#define PULSE_BIT 0x01000000 +#define PULSE_MASK 0x00FFFFFF + +#define LIRC_MODE2_SPACE 0x00000000 +#define LIRC_MODE2_PULSE 0x01000000 +#define LIRC_MODE2_FREQUENCY 0x02000000 +#define LIRC_MODE2_TIMEOUT 0x03000000 + +#define LIRC_VALUE_MASK 0x00FFFFFF +#define LIRC_MODE2_MASK 0xFF000000 + +#define LIRC_SPACE(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_SPACE) +#define LIRC_PULSE(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_PULSE) +#define LIRC_FREQUENCY(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_FREQUENCY) +#define LIRC_TIMEOUT(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_TIMEOUT) + +#define LIRC_VALUE(val) ((val)&LIRC_VALUE_MASK) +#define LIRC_MODE2(val) ((val)&LIRC_MODE2_MASK) + +#define LIRC_IS_SPACE(val) (LIRC_MODE2(val) == LIRC_MODE2_SPACE) +#define LIRC_IS_PULSE(val) (LIRC_MODE2(val) == LIRC_MODE2_PULSE) +#define LIRC_IS_FREQUENCY(val) (LIRC_MODE2(val) == LIRC_MODE2_FREQUENCY) +#define LIRC_IS_TIMEOUT(val) (LIRC_MODE2(val) == LIRC_MODE2_TIMEOUT) + +/* used heavily by lirc userspace */ +#define lirc_t int + +/*** lirc compatible hardware features ***/ + +#define LIRC_MODE2SEND(x) (x) +#define LIRC_SEND2MODE(x) (x) +#define LIRC_MODE2REC(x) ((x) << 16) +#define LIRC_REC2MODE(x) ((x) >> 16) + +#define LIRC_MODE_RAW 0x00000001 +#define LIRC_MODE_PULSE 0x00000002 +#define LIRC_MODE_MODE2 0x00000004 +#define LIRC_MODE_LIRCCODE 0x00000010 + + +#define LIRC_CAN_SEND_RAW LIRC_MODE2SEND(LIRC_MODE_RAW) +#define LIRC_CAN_SEND_PULSE LIRC_MODE2SEND(LIRC_MODE_PULSE) +#define LIRC_CAN_SEND_MODE2 LIRC_MODE2SEND(LIRC_MODE_MODE2) +#define LIRC_CAN_SEND_LIRCCODE LIRC_MODE2SEND(LIRC_MODE_LIRCCODE) + +#define LIRC_CAN_SEND_MASK 0x0000003f + +#define LIRC_CAN_SET_SEND_CARRIER 0x00000100 +#define LIRC_CAN_SET_SEND_DUTY_CYCLE 0x00000200 +#define LIRC_CAN_SET_TRANSMITTER_MASK 0x00000400 + +#define LIRC_CAN_REC_RAW LIRC_MODE2REC(LIRC_MODE_RAW) +#define LIRC_CAN_REC_PULSE LIRC_MODE2REC(LIRC_MODE_PULSE) +#define LIRC_CAN_REC_MODE2 LIRC_MODE2REC(LIRC_MODE_MODE2) +#define LIRC_CAN_REC_LIRCCODE LIRC_MODE2REC(LIRC_MODE_LIRCCODE) + +#define LIRC_CAN_REC_MASK LIRC_MODE2REC(LIRC_CAN_SEND_MASK) + +#define LIRC_CAN_SET_REC_CARRIER (LIRC_CAN_SET_SEND_CARRIER << 16) +#define LIRC_CAN_SET_REC_DUTY_CYCLE (LIRC_CAN_SET_SEND_DUTY_CYCLE << 16) + +#define LIRC_CAN_SET_REC_DUTY_CYCLE_RANGE 0x40000000 +#define LIRC_CAN_SET_REC_CARRIER_RANGE 0x80000000 +#define LIRC_CAN_GET_REC_RESOLUTION 0x20000000 +#define LIRC_CAN_SET_REC_TIMEOUT 0x10000000 +#define LIRC_CAN_SET_REC_FILTER 0x08000000 + +#define LIRC_CAN_MEASURE_CARRIER 0x02000000 + +#define LIRC_CAN_SEND(x) ((x)&LIRC_CAN_SEND_MASK) +#define LIRC_CAN_REC(x) ((x)&LIRC_CAN_REC_MASK) + +#define LIRC_CAN_NOTIFY_DECODE 0x01000000 + +/*** IOCTL commands for lirc driver ***/ + +#define LIRC_GET_FEATURES _IOR('i', 0x00000000, __u32) + +#define LIRC_GET_SEND_MODE _IOR('i', 0x00000001, __u32) +#define LIRC_GET_REC_MODE _IOR('i', 0x00000002, __u32) +#define LIRC_GET_SEND_CARRIER _IOR('i', 0x00000003, __u32) +#define LIRC_GET_REC_CARRIER _IOR('i', 0x00000004, __u32) +#define LIRC_GET_SEND_DUTY_CYCLE _IOR('i', 0x00000005, __u32) +#define LIRC_GET_REC_DUTY_CYCLE _IOR('i', 0x00000006, __u32) +#define LIRC_GET_REC_RESOLUTION _IOR('i', 0x00000007, __u32) + +#define LIRC_GET_MIN_TIMEOUT _IOR('i', 0x00000008, __u32) +#define LIRC_GET_MAX_TIMEOUT _IOR('i', 0x00000009, __u32) + +#define LIRC_GET_MIN_FILTER_PULSE _IOR('i', 0x0000000a, __u32) +#define LIRC_GET_MAX_FILTER_PULSE _IOR('i', 0x0000000b, __u32) +#define LIRC_GET_MIN_FILTER_SPACE _IOR('i', 0x0000000c, __u32) +#define LIRC_GET_MAX_FILTER_SPACE _IOR('i', 0x0000000d, __u32) + +/* code length in bits, currently only for LIRC_MODE_LIRCCODE */ +#define LIRC_GET_LENGTH _IOR('i', 0x0000000f, __u32) + +#define LIRC_SET_SEND_MODE _IOW('i', 0x00000011, __u32) +#define LIRC_SET_REC_MODE _IOW('i', 0x00000012, __u32) +/* Note: these can reset the according pulse_width */ +#define LIRC_SET_SEND_CARRIER _IOW('i', 0x00000013, __u32) +#define LIRC_SET_REC_CARRIER _IOW('i', 0x00000014, __u32) +#define LIRC_SET_SEND_DUTY_CYCLE _IOW('i', 0x00000015, __u32) +#define LIRC_SET_REC_DUTY_CYCLE _IOW('i', 0x00000016, __u32) +#define LIRC_SET_TRANSMITTER_MASK _IOW('i', 0x00000017, __u32) + +/* + * when a timeout != 0 is set the driver will send a + * LIRC_MODE2_TIMEOUT data packet, otherwise LIRC_MODE2_TIMEOUT is + * never sent, timeout is disabled by default + */ +#define LIRC_SET_REC_TIMEOUT _IOW('i', 0x00000018, __u32) + +/* 1 enables, 0 disables timeout reports in MODE2 */ +#define LIRC_SET_REC_TIMEOUT_REPORTS _IOW('i', 0x00000019, __u32) + +/* + * pulses shorter than this are filtered out by hardware (software + * emulation in lirc_dev?) + */ +#define LIRC_SET_REC_FILTER_PULSE _IOW('i', 0x0000001a, __u32) +/* + * spaces shorter than this are filtered out by hardware (software + * emulation in lirc_dev?) + */ +#define LIRC_SET_REC_FILTER_SPACE _IOW('i', 0x0000001b, __u32) +/* + * if filter cannot be set independantly for pulse/space, this should + * be used + */ +#define LIRC_SET_REC_FILTER _IOW('i', 0x0000001c, __u32) + +/* + * if enabled from the next key press on the driver will send + * LIRC_MODE2_FREQUENCY packets + */ +#define LIRC_SET_MEASURE_CARRIER_MODE _IOW('i', 0x0000001d, __u32) + +/* + * to set a range use + * LIRC_SET_REC_DUTY_CYCLE_RANGE/LIRC_SET_REC_CARRIER_RANGE with the + * lower bound first and later + * LIRC_SET_REC_DUTY_CYCLE/LIRC_SET_REC_CARRIER with the upper bound + */ + +#define LIRC_SET_REC_DUTY_CYCLE_RANGE _IOW('i', 0x0000001e, __u32) +#define LIRC_SET_REC_CARRIER_RANGE _IOW('i', 0x0000001f, __u32) + +#define LIRC_NOTIFY_DECODE _IO('i', 0x00000020) + +#define LIRC_SETUP_START _IO('i', 0x00000021) +#define LIRC_SETUP_END _IO('i', 0x00000022) + +#endif diff --git a/include/media/lirc_dev.h b/include/media/lirc_dev.h new file mode 100644 index 00000000000..b1f60663cb3 --- /dev/null +++ b/include/media/lirc_dev.h @@ -0,0 +1,225 @@ +/* + * LIRC base driver + * + * by Artur Lipowski <alipowski@interia.pl> + * This code is licensed under GNU GPL + * + */ + +#ifndef _LINUX_LIRC_DEV_H +#define _LINUX_LIRC_DEV_H + +#define MAX_IRCTL_DEVICES 4 +#define BUFLEN 16 + +#define mod(n, div) ((n) % (div)) + +#include <linux/slab.h> +#include <linux/fs.h> +#include <linux/ioctl.h> +#include <linux/poll.h> +#include <linux/kfifo.h> +#include <media/lirc.h> + +struct lirc_buffer { + wait_queue_head_t wait_poll; + spinlock_t fifo_lock; + unsigned int chunk_size; + unsigned int size; /* in chunks */ + /* Using chunks instead of bytes pretends to simplify boundary checking + * And should allow for some performance fine tunning later */ + struct kfifo fifo; + u8 fifo_initialized; +}; + +static inline void lirc_buffer_clear(struct lirc_buffer *buf) +{ + unsigned long flags; + + if (buf->fifo_initialized) { + spin_lock_irqsave(&buf->fifo_lock, flags); + kfifo_reset(&buf->fifo); + spin_unlock_irqrestore(&buf->fifo_lock, flags); + } else + WARN(1, "calling %s on an uninitialized lirc_buffer\n", + __func__); +} + +static inline int lirc_buffer_init(struct lirc_buffer *buf, + unsigned int chunk_size, + unsigned int size) +{ + int ret; + + init_waitqueue_head(&buf->wait_poll); + spin_lock_init(&buf->fifo_lock); + buf->chunk_size = chunk_size; + buf->size = size; + ret = kfifo_alloc(&buf->fifo, size * chunk_size, GFP_KERNEL); + if (ret == 0) + buf->fifo_initialized = 1; + + return ret; +} + +static inline void lirc_buffer_free(struct lirc_buffer *buf) +{ + if (buf->fifo_initialized) { + kfifo_free(&buf->fifo); + buf->fifo_initialized = 0; + } else + WARN(1, "calling %s on an uninitialized lirc_buffer\n", + __func__); +} + +static inline int lirc_buffer_len(struct lirc_buffer *buf) +{ + int len; + unsigned long flags; + + spin_lock_irqsave(&buf->fifo_lock, flags); + len = kfifo_len(&buf->fifo); + spin_unlock_irqrestore(&buf->fifo_lock, flags); + + return len; +} + +static inline int lirc_buffer_full(struct lirc_buffer *buf) +{ + return lirc_buffer_len(buf) == buf->size * buf->chunk_size; +} + +static inline int lirc_buffer_empty(struct lirc_buffer *buf) +{ + return !lirc_buffer_len(buf); +} + +static inline int lirc_buffer_available(struct lirc_buffer *buf) +{ + return buf->size - (lirc_buffer_len(buf) / buf->chunk_size); +} + +static inline unsigned int lirc_buffer_read(struct lirc_buffer *buf, + unsigned char *dest) +{ + unsigned int ret = 0; + + if (lirc_buffer_len(buf) >= buf->chunk_size) + ret = kfifo_out_locked(&buf->fifo, dest, buf->chunk_size, + &buf->fifo_lock); + return ret; + +} + +static inline unsigned int lirc_buffer_write(struct lirc_buffer *buf, + unsigned char *orig) +{ + unsigned int ret; + + ret = kfifo_in_locked(&buf->fifo, orig, buf->chunk_size, + &buf->fifo_lock); + + return ret; +} + +struct lirc_driver { + char name[40]; + int minor; + unsigned long code_length; + unsigned int buffer_size; /* in chunks holding one code each */ + int sample_rate; + unsigned long features; + + unsigned int chunk_size; + + void *data; + int min_timeout; + int max_timeout; + int (*add_to_buf) (void *data, struct lirc_buffer *buf); + struct lirc_buffer *rbuf; + int (*set_use_inc) (void *data); + void (*set_use_dec) (void *data); + struct file_operations *fops; + struct device *dev; + struct module *owner; +}; + +/* name: + * this string will be used for logs + * + * minor: + * indicates minor device (/dev/lirc) number for registered driver + * if caller fills it with negative value, then the first free minor + * number will be used (if available) + * + * code_length: + * length of the remote control key code expressed in bits + * + * sample_rate: + * + * data: + * it may point to any driver data and this pointer will be passed to + * all callback functions + * + * add_to_buf: + * add_to_buf will be called after specified period of the time or + * triggered by the external event, this behavior depends on value of + * the sample_rate this function will be called in user context. This + * routine should return 0 if data was added to the buffer and + * -ENODATA if none was available. This should add some number of bits + * evenly divisible by code_length to the buffer + * + * rbuf: + * if not NULL, it will be used as a read buffer, you will have to + * write to the buffer by other means, like irq's (see also + * lirc_serial.c). + * + * set_use_inc: + * set_use_inc will be called after device is opened + * + * set_use_dec: + * set_use_dec will be called after device is closed + * + * fops: + * file_operations for drivers which don't fit the current driver model. + * + * Some ioctl's can be directly handled by lirc_dev if the driver's + * ioctl function is NULL or if it returns -ENOIOCTLCMD (see also + * lirc_serial.c). + * + * owner: + * the module owning this struct + * + */ + + +/* following functions can be called ONLY from user context + * + * returns negative value on error or minor number + * of the registered device if success + * contents of the structure pointed by p is copied + */ +extern int lirc_register_driver(struct lirc_driver *d); + +/* returns negative value on error or 0 if success +*/ +extern int lirc_unregister_driver(int minor); + +/* Returns the private data stored in the lirc_driver + * associated with the given device file pointer. + */ +void *lirc_get_pdata(struct file *file); + +/* default file operations + * used by drivers if they override only some operations + */ +int lirc_dev_fop_open(struct inode *inode, struct file *file); +int lirc_dev_fop_close(struct inode *inode, struct file *file); +unsigned int lirc_dev_fop_poll(struct file *file, poll_table *wait); +long lirc_dev_fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg); +ssize_t lirc_dev_fop_read(struct file *file, char *buffer, size_t length, + loff_t *ppos); +ssize_t lirc_dev_fop_write(struct file *file, const char *buffer, size_t length, + loff_t *ppos); + +#endif diff --git a/include/media/rc-map.h b/include/media/rc-map.h index c78e99a435b..9569d0863f8 100644 --- a/include/media/rc-map.h +++ b/include/media/rc-map.h @@ -17,8 +17,13 @@ #define IR_TYPE_RC6 (1 << 2) /* Philips RC6 protocol */ #define IR_TYPE_JVC (1 << 3) /* JVC protocol */ #define IR_TYPE_SONY (1 << 4) /* Sony12/15/20 protocol */ +#define IR_TYPE_LIRC (1 << 30) /* Pass raw IR to lirc userspace */ #define IR_TYPE_OTHER (1u << 31) +#define IR_TYPE_ALL (IR_TYPE_RC5 | IR_TYPE_NEC | IR_TYPE_RC6 | \ + IR_TYPE_JVC | IR_TYPE_SONY | IR_TYPE_LIRC | \ + IR_TYPE_OTHER) + struct ir_scancode { u32 scancode; u32 keycode; @@ -64,6 +69,8 @@ void rc_map_init(void); #define RC_MAP_BUDGET_CI_OLD "rc-budget-ci-old" #define RC_MAP_CINERGY_1400 "rc-cinergy-1400" #define RC_MAP_CINERGY "rc-cinergy" +#define RC_MAP_DIB0700_NEC_TABLE "rc-dib0700-nec" +#define RC_MAP_DIB0700_RC5_TABLE "rc-dib0700-rc5" #define RC_MAP_DM1105_NEC "rc-dm1105-nec" #define RC_MAP_DNTV_LIVE_DVBT_PRO "rc-dntv-live-dvbt-pro" #define RC_MAP_DNTV_LIVE_DVB_T "rc-dntv-live-dvb-t" @@ -87,6 +94,7 @@ void rc_map_init(void); #define RC_MAP_KAIOMY "rc-kaiomy" #define RC_MAP_KWORLD_315U "rc-kworld-315u" #define RC_MAP_KWORLD_PLUS_TV_ANALOG "rc-kworld-plus-tv-analog" +#define RC_MAP_LIRC "rc-lirc" #define RC_MAP_MANLI "rc-manli" #define RC_MAP_MSI_TVANYWHERE_PLUS "rc-msi-tvanywhere-plus" #define RC_MAP_MSI_TVANYWHERE "rc-msi-tvanywhere" @@ -107,6 +115,7 @@ void rc_map_init(void); #define RC_MAP_PV951 "rc-pv951" #define RC_MAP_RC5_HAUPPAUGE_NEW "rc-rc5-hauppauge-new" #define RC_MAP_RC5_TV "rc-rc5-tv" +#define RC_MAP_RC6_MCE "rc-rc6-mce" #define RC_MAP_REAL_AUDIO_220_32_KEYS "rc-real-audio-220-32-keys" #define RC_MAP_TBS_NEC "rc-tbs-nec" #define RC_MAP_TERRATEC_CINERGY_XS "rc-terratec-cinergy-xs" @@ -116,6 +125,7 @@ void rc_map_init(void); #define RC_MAP_VIDEOMATE_TV_PVR "rc-videomate-tv-pvr" #define RC_MAP_WINFAST "rc-winfast" #define RC_MAP_WINFAST_USBII_DELUXE "rc-winfast-usbii-deluxe" + /* * Please, do not just append newer Remote Controller names at the end. * The names should be ordered in alphabetical order diff --git a/include/media/sh_mobile_ceu.h b/include/media/sh_mobile_ceu.h index b6774783687..80346a6d28a 100644 --- a/include/media/sh_mobile_ceu.h +++ b/include/media/sh_mobile_ceu.h @@ -6,8 +6,11 @@ #define SH_CEU_FLAG_HSYNC_LOW (1 << 2) /* default High if possible */ #define SH_CEU_FLAG_VSYNC_LOW (1 << 3) /* default High if possible */ +struct device; + struct sh_mobile_ceu_info { unsigned long flags; + struct device *csi2_dev; }; #endif /* __ASM_SH_MOBILE_CEU_H__ */ diff --git a/include/media/sh_mobile_csi2.h b/include/media/sh_mobile_csi2.h new file mode 100644 index 00000000000..4d261517446 --- /dev/null +++ b/include/media/sh_mobile_csi2.h @@ -0,0 +1,46 @@ +/* + * Driver header for the SH-Mobile MIPI CSI-2 unit + * + * Copyright (C) 2010, Guennadi Liakhovetski <g.liakhovetski@gmx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef SH_MIPI_CSI +#define SH_MIPI_CSI + +enum sh_csi2_phy { + SH_CSI2_PHY_MAIN, + SH_CSI2_PHY_SUB, +}; + +enum sh_csi2_type { + SH_CSI2C, + SH_CSI2I, +}; + +#define SH_CSI2_CRC (1 << 0) +#define SH_CSI2_ECC (1 << 1) + +struct platform_device; + +struct sh_csi2_client_config { + enum sh_csi2_phy phy; + unsigned char lanes; /* bitmask[3:0] */ + unsigned char channel; /* 0..3 */ + struct platform_device *pdev; /* client platform device */ +}; + +struct sh_csi2_pdata { + enum sh_csi2_type type; + unsigned int flags; + struct sh_csi2_client_config *clients; + int num_clients; +}; + +struct device; +struct v4l2_device; + +#endif diff --git a/include/media/soc_camera.h b/include/media/soc_camera.h index b8289c2f609..2ce957301f7 100644 --- a/include/media/soc_camera.h +++ b/include/media/soc_camera.h @@ -12,12 +12,15 @@ #ifndef SOC_CAMERA_H #define SOC_CAMERA_H +#include <linux/device.h> #include <linux/mutex.h> #include <linux/pm.h> #include <linux/videodev2.h> #include <media/videobuf-core.h> #include <media/v4l2-device.h> +extern struct bus_type soc_camera_bus_type; + struct soc_camera_device { struct list_head list; struct device dev; diff --git a/include/media/v4l2-mediabus.h b/include/media/v4l2-mediabus.h index 865cda7cd61..f0cf2e7def0 100644 --- a/include/media/v4l2-mediabus.h +++ b/include/media/v4l2-mediabus.h @@ -24,10 +24,10 @@ */ enum v4l2_mbus_pixelcode { V4L2_MBUS_FMT_FIXED = 1, - V4L2_MBUS_FMT_YUYV8_2X8_LE, - V4L2_MBUS_FMT_YVYU8_2X8_LE, - V4L2_MBUS_FMT_YUYV8_2X8_BE, - V4L2_MBUS_FMT_YVYU8_2X8_BE, + V4L2_MBUS_FMT_YUYV8_2X8, + V4L2_MBUS_FMT_YVYU8_2X8, + V4L2_MBUS_FMT_UYVY8_2X8, + V4L2_MBUS_FMT_VYUY8_2X8, V4L2_MBUS_FMT_RGB555_2X8_PADHI_LE, V4L2_MBUS_FMT_RGB555_2X8_PADHI_BE, V4L2_MBUS_FMT_RGB565_2X8_LE, @@ -41,6 +41,11 @@ enum v4l2_mbus_pixelcode { V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_BE, V4L2_MBUS_FMT_SBGGR10_2X8_PADLO_BE, V4L2_MBUS_FMT_SGRBG8_1X8, + V4L2_MBUS_FMT_SBGGR12_1X12, + V4L2_MBUS_FMT_YUYV8_1_5X8, + V4L2_MBUS_FMT_YVYU8_1_5X8, + V4L2_MBUS_FMT_UYVY8_1_5X8, + V4L2_MBUS_FMT_VYUY8_1_5X8, }; /** diff --git a/include/media/videobuf-core.h b/include/media/videobuf-core.h index f91a736c133..f2c41cebf45 100644 --- a/include/media/videobuf-core.h +++ b/include/media/videobuf-core.h @@ -54,8 +54,6 @@ struct videobuf_queue; struct videobuf_mapping { unsigned int count; - unsigned long start; - unsigned long end; struct videobuf_queue *q; }; @@ -127,7 +125,7 @@ struct videobuf_queue_ops { struct videobuf_qtype_ops { u32 magic; - struct videobuf_buffer *(*alloc)(size_t size); + struct videobuf_buffer *(*alloc_vb)(size_t size); void *(*vaddr) (struct videobuf_buffer *buf); int (*iolock) (struct videobuf_queue *q, struct videobuf_buffer *vb, @@ -173,7 +171,7 @@ int videobuf_waiton(struct videobuf_buffer *vb, int non_blocking, int intr); int videobuf_iolock(struct videobuf_queue *q, struct videobuf_buffer *vb, struct v4l2_framebuffer *fbuf); -struct videobuf_buffer *videobuf_alloc(struct videobuf_queue *q); +struct videobuf_buffer *videobuf_alloc_vb(struct videobuf_queue *q); /* Used on videobuf-dvb */ void *videobuf_queue_to_vaddr(struct videobuf_queue *q, diff --git a/include/media/videobuf-dma-sg.h b/include/media/videobuf-dma-sg.h index a195f3b9c00..97e07f46a0f 100644 --- a/include/media/videobuf-dma-sg.h +++ b/include/media/videobuf-dma-sg.h @@ -25,23 +25,6 @@ /* --------------------------------------------------------------------- */ /* - * Return a scatterlist for some page-aligned vmalloc()'ed memory - * block (NULL on errors). Memory for the scatterlist is allocated - * using kmalloc. The caller must free the memory. - */ -struct scatterlist *videobuf_vmalloc_to_sg(unsigned char *virt, int nr_pages); - -/* - * Return a scatterlist for a an array of userpages (NULL on errors). - * Memory for the scatterlist is allocated using kmalloc. The caller - * must free the memory. - */ -struct scatterlist *videobuf_pages_to_sg(struct page **pages, int nr_pages, - int offset); - -/* --------------------------------------------------------------------- */ - -/* * A small set of helper functions to manage buffers (both userland * and kernel) for DMA. * @@ -68,7 +51,7 @@ struct videobuf_dmabuf { struct page **pages; /* for kernel buffers */ - void *vmalloc; + void *vaddr; /* for overlay buffers (pci-pci dma) */ dma_addr_t bus_addr; @@ -87,6 +70,16 @@ struct videobuf_dma_sg_memory { struct videobuf_dmabuf dma; }; +/* + * Scatter-gather DMA buffer API. + * + * These functions provide a simple way to create a page list and a + * scatter-gather list from a kernel, userspace of physical address and map the + * memory for DMA operation. + * + * Despite the name, this is totally unrelated to videobuf, except that + * videobuf-dma-sg uses the same API internally. + */ void videobuf_dma_init(struct videobuf_dmabuf *dma); int videobuf_dma_init_user(struct videobuf_dmabuf *dma, int direction, unsigned long data, unsigned long size); @@ -96,8 +89,8 @@ int videobuf_dma_init_overlay(struct videobuf_dmabuf *dma, int direction, dma_addr_t addr, int nr_pages); int videobuf_dma_free(struct videobuf_dmabuf *dma); -int videobuf_dma_map(struct videobuf_queue *q, struct videobuf_dmabuf *dma); -int videobuf_dma_unmap(struct videobuf_queue *q, struct videobuf_dmabuf *dma); +int videobuf_dma_map(struct device *dev, struct videobuf_dmabuf *dma); +int videobuf_dma_unmap(struct device *dev, struct videobuf_dmabuf *dma); struct videobuf_dmabuf *videobuf_to_dma(struct videobuf_buffer *buf); void *videobuf_sg_alloc(size_t size); @@ -111,11 +104,5 @@ void videobuf_queue_sg_init(struct videobuf_queue *q, unsigned int msize, void *priv); -/*FIXME: these variants are used only on *-alsa code, where videobuf is - * used without queue - */ -int videobuf_sg_dma_map(struct device *dev, struct videobuf_dmabuf *dma); -int videobuf_sg_dma_unmap(struct device *dev, struct videobuf_dmabuf *dma); - #endif /* _VIDEOBUF_DMA_SG_H */ diff --git a/include/media/videobuf-vmalloc.h b/include/media/videobuf-vmalloc.h index 851eb1a2ff2..e19403c18da 100644 --- a/include/media/videobuf-vmalloc.h +++ b/include/media/videobuf-vmalloc.h @@ -22,7 +22,7 @@ struct videobuf_vmalloc_memory { u32 magic; - void *vmalloc; + void *vaddr; /* remap_vmalloc_range seems to need to run * after mmap() on some cases */ |