diff options
Diffstat (limited to 'include/linux/tipc_config.h')
| -rw-r--r-- | include/linux/tipc_config.h | 76 |
1 files changed, 35 insertions, 41 deletions
diff --git a/include/linux/tipc_config.h b/include/linux/tipc_config.h index 9cde86c3241..7d42460a5e3 100644 --- a/include/linux/tipc_config.h +++ b/include/linux/tipc_config.h @@ -1,6 +1,6 @@ /* * include/linux/tipc_config.h: Include file for TIPC configuration interface - * + * * Copyright (c) 2003-2006, Ericsson AB * Copyright (c) 2005-2007, Wind River Systems * All rights reserved. @@ -54,19 +54,19 @@ * which specify parameters or results for the operation. * * For many operations, the request and reply messages have a fixed number - * of TLVs (usually zero or one); however, some reply messages may return + * of TLVs (usually zero or one); however, some reply messages may return * a variable number of TLVs. A failed request is denoted by the presence * of an "error string" TLV in the reply message instead of the TLV(s) the * reply should contain if the request succeeds. */ - -/* + +/* * Public commands: * May be issued by any process. - * Accepted by own node, or by remote node only if remote management enabled. + * Accepted by own node, or by remote node only if remote management enabled. */ - -#define TIPC_CMD_NOOP 0x0000 /* tx none, rx none */ + +#define TIPC_CMD_NOOP 0x0000 /* tx none, rx none */ #define TIPC_CMD_GET_NODES 0x0001 /* tx net_addr, rx node_info(s) */ #define TIPC_CMD_GET_MEDIA_NAMES 0x0002 /* tx none, rx media_name(s) */ #define TIPC_CMD_GET_BEARER_NAMES 0x0003 /* tx none, rx bearer_name(s) */ @@ -83,21 +83,21 @@ #define TIPC_CMD_GET_LINK_PEER 0x000D /* tx link_name, rx ? */ #endif -/* +/* * Protected commands: * May only be issued by "network administration capable" process. * Accepted by own node, or by remote node only if remote management enabled - * and this node is zone manager. + * and this node is zone manager. */ #define TIPC_CMD_GET_REMOTE_MNG 0x4003 /* tx none, rx unsigned */ #define TIPC_CMD_GET_MAX_PORTS 0x4004 /* tx none, rx unsigned */ #define TIPC_CMD_GET_MAX_PUBL 0x4005 /* tx none, rx unsigned */ #define TIPC_CMD_GET_MAX_SUBSCR 0x4006 /* tx none, rx unsigned */ -#define TIPC_CMD_GET_MAX_ZONES 0x4007 /* tx none, rx unsigned */ -#define TIPC_CMD_GET_MAX_CLUSTERS 0x4008 /* tx none, rx unsigned */ +#define TIPC_CMD_GET_MAX_ZONES 0x4007 /* obsoleted */ +#define TIPC_CMD_GET_MAX_CLUSTERS 0x4008 /* obsoleted */ #define TIPC_CMD_GET_MAX_NODES 0x4009 /* tx none, rx unsigned */ -#define TIPC_CMD_GET_MAX_SLAVES 0x400A /* tx none, rx unsigned */ +#define TIPC_CMD_GET_MAX_SLAVES 0x400A /* obsoleted */ #define TIPC_CMD_GET_NETID 0x400B /* tx none, rx unsigned */ #define TIPC_CMD_ENABLE_BEARER 0x4101 /* tx bearer_config, rx none */ @@ -116,10 +116,10 @@ #define TIPC_CMD_UNBLOCK_LINK 0x4106 /* tx link_name, rx none */ #endif -/* +/* * Private commands: * May only be issued by "network administration capable" process. - * Accepted by own node only; cannot be used on a remote node. + * Accepted by own node only; cannot be used on a remote node. */ #define TIPC_CMD_SET_NODE_ADDR 0x8001 /* tx net_addr, rx none */ @@ -130,10 +130,10 @@ #define TIPC_CMD_SET_MAX_PORTS 0x8004 /* tx unsigned, rx none */ #define TIPC_CMD_SET_MAX_PUBL 0x8005 /* tx unsigned, rx none */ #define TIPC_CMD_SET_MAX_SUBSCR 0x8006 /* tx unsigned, rx none */ -#define TIPC_CMD_SET_MAX_ZONES 0x8007 /* tx unsigned, rx none */ -#define TIPC_CMD_SET_MAX_CLUSTERS 0x8008 /* tx unsigned, rx none */ +#define TIPC_CMD_SET_MAX_ZONES 0x8007 /* obsoleted */ +#define TIPC_CMD_SET_MAX_CLUSTERS 0x8008 /* obsoleted */ #define TIPC_CMD_SET_MAX_NODES 0x8009 /* tx unsigned, rx none */ -#define TIPC_CMD_SET_MAX_SLAVES 0x800A /* tx unsigned, rx none */ +#define TIPC_CMD_SET_MAX_SLAVES 0x800A /* obsoleted */ #define TIPC_CMD_SET_NETID 0x800B /* tx unsigned, rx none */ /* @@ -156,20 +156,20 @@ #define TIPC_TLV_ULTRA_STRING 5 /* char[32768] (max) */ #define TIPC_TLV_ERROR_STRING 16 /* char[128] containing "error code" */ -#define TIPC_TLV_NET_ADDR 17 /* 32-bit integer denoting <Z.C.N> */ +#define TIPC_TLV_NET_ADDR 17 /* 32-bit integer denoting <Z.C.N> */ #define TIPC_TLV_MEDIA_NAME 18 /* char[TIPC_MAX_MEDIA_NAME] */ #define TIPC_TLV_BEARER_NAME 19 /* char[TIPC_MAX_BEARER_NAME] */ #define TIPC_TLV_LINK_NAME 20 /* char[TIPC_MAX_LINK_NAME] */ #define TIPC_TLV_NODE_INFO 21 /* struct tipc_node_info */ #define TIPC_TLV_LINK_INFO 22 /* struct tipc_link_info */ -#define TIPC_TLV_BEARER_CONFIG 23 /* struct tipc_bearer_config */ -#define TIPC_TLV_LINK_CONFIG 24 /* struct tipc_link_config */ +#define TIPC_TLV_BEARER_CONFIG 23 /* struct tipc_bearer_config */ +#define TIPC_TLV_LINK_CONFIG 24 /* struct tipc_link_config */ #define TIPC_TLV_NAME_TBL_QUERY 25 /* struct tipc_name_table_query */ -#define TIPC_TLV_PORT_REF 26 /* 32-bit port reference */ +#define TIPC_TLV_PORT_REF 26 /* 32-bit port reference */ /* * Maximum sizes of TIPC bearer-related names (including terminating NUL) - */ + */ #define TIPC_MAX_MEDIA_NAME 16 /* format = media */ #define TIPC_MAX_IF_NAME 16 /* format = interface */ @@ -234,7 +234,7 @@ struct tipc_name_table_query { }; /* - * The error string TLV is a null-terminated string describing the cause + * The error string TLV is a null-terminated string describing the cause * of the request failure. To simplify error processing (and to save space) * the first character of the string can be a special error code character * (lying by the range 0x80 to 0xFF) which represents a pre-defined reason. @@ -254,16 +254,11 @@ struct tipc_link_create { struct tipc_media_addr peer_addr; char bearer_name[TIPC_MAX_BEARER_NAME]; }; - -struct tipc_route_info { - __u32 dest; - __u32 router; -}; #endif /* * A TLV consists of a descriptor, followed by the TLV value. - * TLV descriptor fields are stored in network byte order; + * TLV descriptor fields are stored in network byte order; * TLV values must also be stored in network byte order (where applicable). * TLV descriptors must be aligned to addresses which are multiple of 4, * so up to 3 bytes of padding may exist at the end of the TLV value area. @@ -299,7 +294,7 @@ static inline int TLV_OK(const void *tlv, __u16 space) static inline int TLV_CHECK(const void *tlv, __u16 space, __u16 exp_type) { - return TLV_OK(tlv, space) && + return TLV_OK(tlv, space) && (ntohs(((struct tlv_desc *)tlv)->tlv_type) == exp_type); } @@ -318,7 +313,7 @@ static inline int TLV_SET(void *tlv, __u16 type, void *data, __u16 len) } /* - * A TLV list descriptor simplifies processing of messages + * A TLV list descriptor simplifies processing of messages * containing multiple TLVs. */ @@ -327,15 +322,15 @@ struct tlv_list_desc { __u32 tlv_space; /* # bytes from curr TLV to list end */ }; -static inline void TLV_LIST_INIT(struct tlv_list_desc *list, +static inline void TLV_LIST_INIT(struct tlv_list_desc *list, void *data, __u32 space) { list->tlv_ptr = (struct tlv_desc *)data; list->tlv_space = space; } - + static inline int TLV_LIST_EMPTY(struct tlv_list_desc *list) -{ +{ return (list->tlv_space == 0); } @@ -353,7 +348,7 @@ static inline void TLV_LIST_STEP(struct tlv_list_desc *list) { __u16 tlv_space = TLV_ALIGN(ntohs(list->tlv_ptr->tlv_len)); - list->tlv_ptr = (struct tlv_desc *)((char *)list->tlv_ptr + tlv_space); + list->tlv_ptr = (struct tlv_desc *)((char *)list->tlv_ptr + tlv_space); list->tlv_space -= tlv_space; } @@ -377,15 +372,14 @@ struct tipc_genlmsghdr { #define TIPC_GENL_HDRLEN NLMSG_ALIGN(sizeof(struct tipc_genlmsghdr)) /* - * Configuration messages exchanged via TIPC sockets use the TIPC configuration - * message header, which is defined below. This structure is analogous - * to the Netlink message header, but fields are stored in network byte order - * and no padding is permitted between the header and the message data + * Configuration messages exchanged via TIPC sockets use the TIPC configuration + * message header, which is defined below. This structure is analogous + * to the Netlink message header, but fields are stored in network byte order + * and no padding is permitted between the header and the message data * that follows. */ -struct tipc_cfg_msg_hdr -{ +struct tipc_cfg_msg_hdr { __be32 tcm_len; /* Message length (including header) */ __be16 tcm_type; /* Command type */ __be16 tcm_flags; /* Additional flags */ |