diff options
Diffstat (limited to 'include/linux/sc26198.h')
| -rw-r--r-- | include/linux/sc26198.h | 533 |
1 files changed, 533 insertions, 0 deletions
diff --git a/include/linux/sc26198.h b/include/linux/sc26198.h new file mode 100644 index 00000000000..7ca35abad38 --- /dev/null +++ b/include/linux/sc26198.h @@ -0,0 +1,533 @@ +/*****************************************************************************/ + +/* + * sc26198.h -- SC26198 UART hardware info. + * + * Copyright (C) 1995-1998 Stallion Technologies + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/*****************************************************************************/ +#ifndef _SC26198_H +#define _SC26198_H +/*****************************************************************************/ + +/* + * Define the number of async ports per sc26198 uart device. + */ +#define SC26198_PORTS 8 + +/* + * Baud rate timing clocks. All derived from a master 14.7456 MHz clock. + */ +#define SC26198_MASTERCLOCK 14745600L +#define SC26198_DCLK (SC26198_MASTERCLOCK) +#define SC26198_CCLK (SC26198_MASTERCLOCK / 2) +#define SC26198_BCLK (SC26198_MASTERCLOCK / 4) + +/* + * Define internal FIFO sizes for the 26198 ports. + */ +#define SC26198_TXFIFOSIZE 16 +#define SC26198_RXFIFOSIZE 16 + +/*****************************************************************************/ + +/* + * Global register definitions. These registers are global to each 26198 + * device, not specific ports on it. + */ +#define TSTR 0x0d +#define GCCR 0x0f +#define ICR 0x1b +#define WDTRCR 0x1d +#define IVR 0x1f +#define BRGTRUA 0x84 +#define GPOSR 0x87 +#define GPOC 0x8b +#define UCIR 0x8c +#define CIR 0x8c +#define BRGTRUB 0x8d +#define GRXFIFO 0x8e +#define GTXFIFO 0x8e +#define GCCR2 0x8f +#define BRGTRLA 0x94 +#define GPOR 0x97 +#define GPOD 0x9b +#define BRGTCR 0x9c +#define GICR 0x9c +#define BRGTRLB 0x9d +#define GIBCR 0x9d +#define GITR 0x9f + +/* + * Per port channel registers. These are the register offsets within + * the port address space, so need to have the port address (0 to 7) + * inserted in bit positions 4:6. + */ +#define MR0 0x00 +#define MR1 0x01 +#define IOPCR 0x02 +#define BCRBRK 0x03 +#define BCRCOS 0x04 +#define BCRX 0x06 +#define BCRA 0x07 +#define XONCR 0x08 +#define XOFFCR 0x09 +#define ARCR 0x0a +#define RXCSR 0x0c +#define TXCSR 0x0e +#define MR2 0x80 +#define SR 0x81 +#define SCCR 0x81 +#define ISR 0x82 +#define IMR 0x82 +#define TXFIFO 0x83 +#define RXFIFO 0x83 +#define IPR 0x84 +#define IOPIOR 0x85 +#define XISR 0x86 + +/* + * For any given port calculate the address to use to access a specified + * register. This is only used for unusual access, mostly this is done + * through the assembler access routines. + */ +#define SC26198_PORTREG(port,reg) ((((port) & 0x07) << 4) | (reg)) + +/*****************************************************************************/ + +/* + * Global configuration control register bit definitions. + */ +#define GCCR_NOACK 0x00 +#define GCCR_IVRACK 0x02 +#define GCCR_IVRCHANACK 0x04 +#define GCCR_IVRTYPCHANACK 0x06 +#define GCCR_ASYNCCYCLE 0x00 +#define GCCR_SYNCCYCLE 0x40 + +/*****************************************************************************/ + +/* + * Mode register 0 bit definitions. + */ +#define MR0_ADDRNONE 0x00 +#define MR0_AUTOWAKE 0x01 +#define MR0_AUTODOZE 0x02 +#define MR0_AUTOWAKEDOZE 0x03 +#define MR0_SWFNONE 0x00 +#define MR0_SWFTX 0x04 +#define MR0_SWFRX 0x08 +#define MR0_SWFRXTX 0x0c +#define MR0_TXMASK 0x30 +#define MR0_TXEMPTY 0x00 +#define MR0_TXHIGH 0x10 +#define MR0_TXHALF 0x20 +#define MR0_TXRDY 0x00 +#define MR0_ADDRNT 0x00 +#define MR0_ADDRT 0x40 +#define MR0_SWFNT 0x00 +#define MR0_SWFT 0x80 + +/* + * Mode register 1 bit definitions. + */ +#define MR1_CS5 0x00 +#define MR1_CS6 0x01 +#define MR1_CS7 0x02 +#define MR1_CS8 0x03 +#define MR1_PAREVEN 0x00 +#define MR1_PARODD 0x04 +#define MR1_PARENB 0x00 +#define MR1_PARFORCE 0x08 +#define MR1_PARNONE 0x10 +#define MR1_PARSPECIAL 0x18 +#define MR1_ERRCHAR 0x00 +#define MR1_ERRBLOCK 0x20 +#define MR1_ISRUNMASKED 0x00 +#define MR1_ISRMASKED 0x40 +#define MR1_AUTORTS 0x80 + +/* + * Mode register 2 bit definitions. + */ +#define MR2_STOP1 0x00 +#define MR2_STOP15 0x01 +#define MR2_STOP2 0x02 +#define MR2_STOP916 0x03 +#define MR2_RXFIFORDY 0x00 +#define MR2_RXFIFOHALF 0x04 +#define MR2_RXFIFOHIGH 0x08 +#define MR2_RXFIFOFULL 0x0c +#define MR2_AUTOCTS 0x10 +#define MR2_TXRTS 0x20 +#define MR2_MODENORM 0x00 +#define MR2_MODEAUTOECHO 0x40 +#define MR2_MODELOOP 0x80 +#define MR2_MODEREMECHO 0xc0 + +/*****************************************************************************/ + +/* + * Baud Rate Generator (BRG) selector values. + */ +#define BRG_50 0x00 +#define BRG_75 0x01 +#define BRG_150 0x02 +#define BRG_200 0x03 +#define BRG_300 0x04 +#define BRG_450 0x05 +#define BRG_600 0x06 +#define BRG_900 0x07 +#define BRG_1200 0x08 +#define BRG_1800 0x09 +#define BRG_2400 0x0a +#define BRG_3600 0x0b +#define BRG_4800 0x0c +#define BRG_7200 0x0d +#define BRG_9600 0x0e +#define BRG_14400 0x0f +#define BRG_19200 0x10 +#define BRG_28200 0x11 +#define BRG_38400 0x12 +#define BRG_57600 0x13 +#define BRG_115200 0x14 +#define BRG_230400 0x15 +#define BRG_GIN0 0x16 +#define BRG_GIN1 0x17 +#define BRG_CT0 0x18 +#define BRG_CT1 0x19 +#define BRG_RX2TX316 0x1b +#define BRG_RX2TX31 0x1c + +#define SC26198_MAXBAUD 921600 + +/*****************************************************************************/ + +/* + * Command register command definitions. + */ +#define CR_NULL 0x04 +#define CR_ADDRNORMAL 0x0c +#define CR_RXRESET 0x14 +#define CR_TXRESET 0x1c +#define CR_CLEARRXERR 0x24 +#define CR_BREAKRESET 0x2c +#define CR_TXSTARTBREAK 0x34 +#define CR_TXSTOPBREAK 0x3c +#define CR_RTSON 0x44 +#define CR_RTSOFF 0x4c +#define CR_ADDRINIT 0x5c +#define CR_RXERRBLOCK 0x6c +#define CR_TXSENDXON 0x84 +#define CR_TXSENDXOFF 0x8c +#define CR_GANGXONSET 0x94 +#define CR_GANGXOFFSET 0x9c +#define CR_GANGXONINIT 0xa4 +#define CR_GANGXOFFINIT 0xac +#define CR_HOSTXON 0xb4 +#define CR_HOSTXOFF 0xbc +#define CR_CANCELXOFF 0xc4 +#define CR_ADDRRESET 0xdc +#define CR_RESETALLPORTS 0xf4 +#define CR_RESETALL 0xfc + +#define CR_RXENABLE 0x01 +#define CR_TXENABLE 0x02 + +/*****************************************************************************/ + +/* + * Channel status register. + */ +#define SR_RXRDY 0x01 +#define SR_RXFULL 0x02 +#define SR_TXRDY 0x04 +#define SR_TXEMPTY 0x08 +#define SR_RXOVERRUN 0x10 +#define SR_RXPARITY 0x20 +#define SR_RXFRAMING 0x40 +#define SR_RXBREAK 0x80 + +#define SR_RXERRS (SR_RXPARITY | SR_RXFRAMING | SR_RXOVERRUN) + +/*****************************************************************************/ + +/* + * Interrupt status register and interrupt mask register bit definitions. + */ +#define IR_TXRDY 0x01 +#define IR_RXRDY 0x02 +#define IR_RXBREAK 0x04 +#define IR_XONXOFF 0x10 +#define IR_ADDRRECOG 0x20 +#define IR_RXWATCHDOG 0x40 +#define IR_IOPORT 0x80 + +/*****************************************************************************/ + +/* + * Interrupt vector register field definitions. + */ +#define IVR_CHANMASK 0x07 +#define IVR_TYPEMASK 0x18 +#define IVR_CONSTMASK 0xc0 + +#define IVR_RXDATA 0x10 +#define IVR_RXBADDATA 0x18 +#define IVR_TXDATA 0x08 +#define IVR_OTHER 0x00 + +/*****************************************************************************/ + +/* + * BRG timer control register bit definitions. + */ +#define BRGCTCR_DISABCLK0 0x00 +#define BRGCTCR_ENABCLK0 0x08 +#define BRGCTCR_DISABCLK1 0x00 +#define BRGCTCR_ENABCLK1 0x80 + +#define BRGCTCR_0SCLK16 0x00 +#define BRGCTCR_0SCLK32 0x01 +#define BRGCTCR_0SCLK64 0x02 +#define BRGCTCR_0SCLK128 0x03 +#define BRGCTCR_0X1 0x04 +#define BRGCTCR_0X12 0x05 +#define BRGCTCR_0IO1A 0x06 +#define BRGCTCR_0GIN0 0x07 + +#define BRGCTCR_1SCLK16 0x00 +#define BRGCTCR_1SCLK32 0x10 +#define BRGCTCR_1SCLK64 0x20 +#define BRGCTCR_1SCLK128 0x30 +#define BRGCTCR_1X1 0x40 +#define BRGCTCR_1X12 0x50 +#define BRGCTCR_1IO1B 0x60 +#define BRGCTCR_1GIN1 0x70 + +/*****************************************************************************/ + +/* + * Watch dog timer enable register. + */ +#define WDTRCR_ENABALL 0xff + +/*****************************************************************************/ + +/* + * XON/XOFF interrupt status register. + */ +#define XISR_TXCHARMASK 0x03 +#define XISR_TXCHARNORMAL 0x00 +#define XISR_TXWAIT 0x01 +#define XISR_TXXOFFPEND 0x02 +#define XISR_TXXONPEND 0x03 + +#define XISR_TXFLOWMASK 0x0c +#define XISR_TXNORMAL 0x00 +#define XISR_TXSTOPPEND 0x04 +#define XISR_TXSTARTED 0x08 +#define XISR_TXSTOPPED 0x0c + +#define XISR_RXFLOWMASK 0x30 +#define XISR_RXFLOWNONE 0x00 +#define XISR_RXXONSENT 0x10 +#define XISR_RXXOFFSENT 0x20 + +#define XISR_RXXONGOT 0x40 +#define XISR_RXXOFFGOT 0x80 + +/*****************************************************************************/ + +/* + * Current interrupt register. + */ +#define CIR_TYPEMASK 0xc0 +#define CIR_TYPEOTHER 0x00 +#define CIR_TYPETX 0x40 +#define CIR_TYPERXGOOD 0x80 +#define CIR_TYPERXBAD 0xc0 + +#define CIR_RXDATA 0x80 +#define CIR_RXBADDATA 0x40 +#define CIR_TXDATA 0x40 + +#define CIR_CHANMASK 0x07 +#define CIR_CNTMASK 0x38 + +#define CIR_SUBTYPEMASK 0x38 +#define CIR_SUBNONE 0x00 +#define CIR_SUBCOS 0x08 +#define CIR_SUBADDR 0x10 +#define CIR_SUBXONXOFF 0x18 +#define CIR_SUBBREAK 0x28 + +/*****************************************************************************/ + +/* + * Global interrupting channel register. + */ +#define GICR_CHANMASK 0x07 + +/*****************************************************************************/ + +/* + * Global interrupting byte count register. + */ +#define GICR_COUNTMASK 0x0f + +/*****************************************************************************/ + +/* + * Global interrupting type register. + */ +#define GITR_RXMASK 0xc0 +#define GITR_RXNONE 0x00 +#define GITR_RXBADDATA 0x80 +#define GITR_RXGOODDATA 0xc0 +#define GITR_TXDATA 0x20 + +#define GITR_SUBTYPEMASK 0x07 +#define GITR_SUBNONE 0x00 +#define GITR_SUBCOS 0x01 +#define GITR_SUBADDR 0x02 +#define GITR_SUBXONXOFF 0x03 +#define GITR_SUBBREAK 0x05 + +/*****************************************************************************/ + +/* + * Input port change register. + */ +#define IPR_CTS 0x01 +#define IPR_DTR 0x02 +#define IPR_RTS 0x04 +#define IPR_DCD 0x08 +#define IPR_CTSCHANGE 0x10 +#define IPR_DTRCHANGE 0x20 +#define IPR_RTSCHANGE 0x40 +#define IPR_DCDCHANGE 0x80 + +#define IPR_CHANGEMASK 0xf0 + +/*****************************************************************************/ + +/* + * IO port interrupt and output register. + */ +#define IOPR_CTS 0x01 +#define IOPR_DTR 0x02 +#define IOPR_RTS 0x04 +#define IOPR_DCD 0x08 +#define IOPR_CTSCOS 0x10 +#define IOPR_DTRCOS 0x20 +#define IOPR_RTSCOS 0x40 +#define IOPR_DCDCOS 0x80 + +/*****************************************************************************/ + +/* + * IO port configuration register. + */ +#define IOPCR_SETCTS 0x00 +#define IOPCR_SETDTR 0x04 +#define IOPCR_SETRTS 0x10 +#define IOPCR_SETDCD 0x00 + +#define IOPCR_SETSIGS (IOPCR_SETRTS | IOPCR_SETRTS | IOPCR_SETDTR | IOPCR_SETDCD) + +/*****************************************************************************/ + +/* + * General purpose output select register. + */ +#define GPORS_TXC1XA 0x08 +#define GPORS_TXC16XA 0x09 +#define GPORS_RXC16XA 0x0a +#define GPORS_TXC16XB 0x0b +#define GPORS_GPOR3 0x0c +#define GPORS_GPOR2 0x0d +#define GPORS_GPOR1 0x0e +#define GPORS_GPOR0 0x0f + +/*****************************************************************************/ + +/* + * General purpose output register. + */ +#define GPOR_0 0x01 +#define GPOR_1 0x02 +#define GPOR_2 0x04 +#define GPOR_3 0x08 + +/*****************************************************************************/ + +/* + * General purpose output clock register. + */ +#define GPORC_0NONE 0x00 +#define GPORC_0GIN0 0x01 +#define GPORC_0GIN1 0x02 +#define GPORC_0IO3A 0x02 + +#define GPORC_1NONE 0x00 +#define GPORC_1GIN0 0x04 +#define GPORC_1GIN1 0x08 +#define GPORC_1IO3C 0x0c + +#define GPORC_2NONE 0x00 +#define GPORC_2GIN0 0x10 +#define GPORC_2GIN1 0x20 +#define GPORC_2IO3E 0x20 + +#define GPORC_3NONE 0x00 +#define GPORC_3GIN0 0x40 +#define GPORC_3GIN1 0x80 +#define GPORC_3IO3G 0xc0 + +/*****************************************************************************/ + +/* + * General purpose output data register. + */ +#define GPOD_0MASK 0x03 +#define GPOD_0SET1 0x00 +#define GPOD_0SET0 0x01 +#define GPOD_0SETR0 0x02 +#define GPOD_0SETIO3B 0x03 + +#define GPOD_1MASK 0x0c +#define GPOD_1SET1 0x00 +#define GPOD_1SET0 0x04 +#define GPOD_1SETR0 0x08 +#define GPOD_1SETIO3D 0x0c + +#define GPOD_2MASK 0x30 +#define GPOD_2SET1 0x00 +#define GPOD_2SET0 0x10 +#define GPOD_2SETR0 0x20 +#define GPOD_2SETIO3F 0x30 + +#define GPOD_3MASK 0xc0 +#define GPOD_3SET1 0x00 +#define GPOD_3SET0 0x40 +#define GPOD_3SETR0 0x80 +#define GPOD_3SETIO3H 0xc0 + +/*****************************************************************************/ +#endif |