diff options
Diffstat (limited to 'include/asm-xtensa/xtensa/config-linux_be/tie.h')
| -rw-r--r-- | include/asm-xtensa/xtensa/config-linux_be/tie.h | 275 |
1 files changed, 275 insertions, 0 deletions
diff --git a/include/asm-xtensa/xtensa/config-linux_be/tie.h b/include/asm-xtensa/xtensa/config-linux_be/tie.h new file mode 100644 index 00000000000..3c2e514602f --- /dev/null +++ b/include/asm-xtensa/xtensa/config-linux_be/tie.h @@ -0,0 +1,275 @@ +/* + * xtensa/config/tie.h -- HAL definitions that are dependent on CORE and TIE configuration + * + * This header file is sometimes referred to as the "compile-time HAL" or CHAL. + * It was generated for a specific Xtensa processor configuration, + * and furthermore for a specific set of TIE source files that extend + * basic core functionality. + * + * Source for configuration-independent binaries (which link in a + * configuration-specific HAL library) must NEVER include this file. + * It is perfectly normal, however, for the HAL source itself to include this file. + */ + +/* + * Copyright (c) 2003 Tensilica, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2.1 of the GNU Lesser General Public + * License as published by the Free Software Foundation. + * + * This program is distributed in the hope that it would be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * + * Further, this software is distributed without any warranty that it is + * free of the rightful claim of any third person regarding infringement + * or the like. Any license provided herein, whether implied or + * otherwise, applies only to this software file. Patent licenses, if + * any, provided herein do not apply to combinations of this program with + * other software, or any other product whatsoever. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this program; if not, write the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, + * USA. + */ + + +#ifndef XTENSA_CONFIG_TIE_H +#define XTENSA_CONFIG_TIE_H + +#include <xtensa/hal.h> + + +/*---------------------------------------------------------------------- + GENERAL + ----------------------------------------------------------------------*/ + +/* + * Separators for macros that expand into arrays. + * These can be predefined by files that #include this one, + * when different separators are required. + */ +/* Element separator for macros that expand into 1-dimensional arrays: */ +#ifndef XCHAL_SEP +#define XCHAL_SEP , +#endif +/* Array separator for macros that expand into 2-dimensional arrays: */ +#ifndef XCHAL_SEP2 +#define XCHAL_SEP2 },{ +#endif + + + + + + +/*---------------------------------------------------------------------- + COPROCESSORS and EXTRA STATE + ----------------------------------------------------------------------*/ + +#define XCHAL_CP_NUM 0 /* number of coprocessors */ +#define XCHAL_CP_MAX 0 /* max coprocessor id plus one (0 if none) */ +#define XCHAL_CP_MASK 0x00 /* bitmask of coprocessors by id */ + +/* Space for coprocessors' state save areas: */ +#define XCHAL_CP0_SA_SIZE 0 +#define XCHAL_CP1_SA_SIZE 0 +#define XCHAL_CP2_SA_SIZE 0 +#define XCHAL_CP3_SA_SIZE 0 +#define XCHAL_CP4_SA_SIZE 0 +#define XCHAL_CP5_SA_SIZE 0 +#define XCHAL_CP6_SA_SIZE 0 +#define XCHAL_CP7_SA_SIZE 0 +/* Minimum required alignments of CP state save areas: */ +#define XCHAL_CP0_SA_ALIGN 1 +#define XCHAL_CP1_SA_ALIGN 1 +#define XCHAL_CP2_SA_ALIGN 1 +#define XCHAL_CP3_SA_ALIGN 1 +#define XCHAL_CP4_SA_ALIGN 1 +#define XCHAL_CP5_SA_ALIGN 1 +#define XCHAL_CP6_SA_ALIGN 1 +#define XCHAL_CP7_SA_ALIGN 1 + +/* Indexing macros: */ +#define _XCHAL_CP_SA_SIZE(n) XCHAL_CP ## n ## _SA_SIZE +#define XCHAL_CP_SA_SIZE(n) _XCHAL_CP_SA_SIZE(n) /* n = 0 .. 7 */ +#define _XCHAL_CP_SA_ALIGN(n) XCHAL_CP ## n ## _SA_ALIGN +#define XCHAL_CP_SA_ALIGN(n) _XCHAL_CP_SA_ALIGN(n) /* n = 0 .. 7 */ + + +/* Space for "extra" state (user special registers and non-cp TIE) save area: */ +#define XCHAL_EXTRA_SA_SIZE 0 +#define XCHAL_EXTRA_SA_ALIGN 1 + +/* Total save area size (extra + all coprocessors) */ +/* (not useful until xthal_{save,restore}_all_extra() is implemented, */ +/* but included for Tor2 beta; doesn't account for alignment!): */ +#define XCHAL_CPEXTRA_SA_SIZE_TOR2 0 /* Tor2Beta temporary definition -- do not use */ + +/* Combined required alignment for all CP and EXTRA state save areas */ +/* (does not include required alignment for any base config registers): */ +#define XCHAL_CPEXTRA_SA_ALIGN 1 + +/* ... */ + + +#ifdef _ASMLANGUAGE +/* + * Assembly-language specific definitions (assembly macros, etc.). + */ +#include <xtensa/config/specreg.h> + +/******************** + * Macros to save and restore the non-coprocessor TIE portion of EXTRA state. + */ + +/* (none) */ + + +/******************** + * Macros to create functions that save and restore all EXTRA (non-coprocessor) state + * (does not include zero-overhead loop registers and non-optional registers). + */ + + /* + * Macro that expands to the body of a function that + * stores the extra (non-coprocessor) optional/custom state. + * Entry: a2 = ptr to save area in which to save extra state + * Exit: any register a2-a15 (?) may have been clobbered. + */ + .macro xchal_extra_store_funcbody + .endm + + + /* + * Macro that expands to the body of a function that + * loads the extra (non-coprocessor) optional/custom state. + * Entry: a2 = ptr to save area from which to restore extra state + * Exit: any register a2-a15 (?) may have been clobbered. + */ + .macro xchal_extra_load_funcbody + .endm + + +/******************** + * Macros to save and restore the state of each TIE coprocessor. + */ + + + +/******************** + * Macros to create functions that save and restore the state of *any* TIE coprocessor. + */ + + /* + * Macro that expands to the body of a function + * that stores the selected coprocessor's state (registers etc). + * Entry: a2 = ptr to save area in which to save cp state + * a3 = coprocessor number + * Exit: any register a2-a15 (?) may have been clobbered. + */ + .macro xchal_cpi_store_funcbody + .endm + + + /* + * Macro that expands to the body of a function + * that loads the selected coprocessor's state (registers etc). + * Entry: a2 = ptr to save area from which to restore cp state + * a3 = coprocessor number + * Exit: any register a2-a15 (?) may have been clobbered. + */ + .macro xchal_cpi_load_funcbody + .endm + +#endif /*_ASMLANGUAGE*/ + + +/* + * Contents of save areas in terms of libdb register numbers. + * NOTE: CONTENTS_LIBDB_{UREG,REGF} macros are not defined in this file; + * it is up to the user of this header file to define these macros + * usefully before each expansion of the CONTENTS_LIBDB macros. + * (Fields rsv[123] are reserved for future additions; they are currently + * set to zero but may be set to some useful values in the future.) + * + * CONTENTS_LIBDB_SREG(libdbnum, offset, size, align, rsv1, name, sregnum, bitmask, rsv2, rsv3) + * CONTENTS_LIBDB_UREG(libdbnum, offset, size, align, rsv1, name, uregnum, bitmask, rsv2, rsv3) + * CONTENTS_LIBDB_REGF(libdbnum, offset, size, align, rsv1, name, index, numentries, contentsize, regname_base, regfile_name, rsv2, rsv3) + */ + +#define XCHAL_EXTRA_SA_CONTENTS_LIBDB_NUM 0 +#define XCHAL_EXTRA_SA_CONTENTS_LIBDB /* empty */ + +#define XCHAL_CP0_SA_CONTENTS_LIBDB_NUM 0 +#define XCHAL_CP0_SA_CONTENTS_LIBDB /* empty */ + +#define XCHAL_CP1_SA_CONTENTS_LIBDB_NUM 0 +#define XCHAL_CP1_SA_CONTENTS_LIBDB /* empty */ + +#define XCHAL_CP2_SA_CONTENTS_LIBDB_NUM 0 +#define XCHAL_CP2_SA_CONTENTS_LIBDB /* empty */ + +#define XCHAL_CP3_SA_CONTENTS_LIBDB_NUM 0 +#define XCHAL_CP3_SA_CONTENTS_LIBDB /* empty */ + +#define XCHAL_CP4_SA_CONTENTS_LIBDB_NUM 0 +#define XCHAL_CP4_SA_CONTENTS_LIBDB /* empty */ + +#define XCHAL_CP5_SA_CONTENTS_LIBDB_NUM 0 +#define XCHAL_CP5_SA_CONTENTS_LIBDB /* empty */ + +#define XCHAL_CP6_SA_CONTENTS_LIBDB_NUM 0 +#define XCHAL_CP6_SA_CONTENTS_LIBDB /* empty */ + +#define XCHAL_CP7_SA_CONTENTS_LIBDB_NUM 0 +#define XCHAL_CP7_SA_CONTENTS_LIBDB /* empty */ + + + + + + +/*---------------------------------------------------------------------- + MISC + ----------------------------------------------------------------------*/ + +#if 0 /* is there something equivalent for user TIE? */ +#define XCHAL_CORE_ID "linux_be" /* configuration's alphanumeric core identifier + (CoreID) set in the Xtensa Processor Generator */ + +#define XCHAL_BUILD_UNIQUE_ID 0x00003256 /* software build-unique ID (22-bit) */ + +/* These definitions describe the hardware targeted by this software: */ +#define XCHAL_HW_CONFIGID0 0xC103D1FF /* config ID reg 0 value (upper 32 of 64 bits) */ +#define XCHAL_HW_CONFIGID1 0x00803256 /* config ID reg 1 value (lower 32 of 64 bits) */ +#define XCHAL_CONFIGID0 XCHAL_HW_CONFIGID0 /* for backward compatibility only -- don't use! */ +#define XCHAL_CONFIGID1 XCHAL_HW_CONFIGID1 /* for backward compatibility only -- don't use! */ +#define XCHAL_HW_RELEASE_MAJOR 1050 /* major release of targeted hardware */ +#define XCHAL_HW_RELEASE_MINOR 1 /* minor release of targeted hardware */ +#define XCHAL_HW_RELEASE_NAME "T1050.1" /* full release name of targeted hardware */ +#define XTHAL_HW_REL_T1050 1 +#define XTHAL_HW_REL_T1050_1 1 +#define XCHAL_HW_CONFIGID_RELIABLE 1 +#endif /*0*/ + + + +/*---------------------------------------------------------------------- + ISA + ----------------------------------------------------------------------*/ + +#if 0 /* these probably don't belong here, but are related to or implemented using TIE */ +#define XCHAL_HAVE_BOOLEANS 0 /* 1 if booleans option configured, 0 otherwise */ +/* Misc instructions: */ +#define XCHAL_HAVE_MUL32 0 /* 1 if 32-bit integer multiply option configured, 0 otherwise */ +#define XCHAL_HAVE_MUL32_HIGH 0 /* 1 if MUL32 option includes MULUH and MULSH, 0 otherwise */ + +#define XCHAL_HAVE_FP 0 /* 1 if floating point option configured, 0 otherwise */ +#endif /*0*/ + + +#endif /*XTENSA_CONFIG_TIE_H*/ + |