aboutsummaryrefslogtreecommitdiff
path: root/include/asm-x86_64
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-x86_64')
-rw-r--r--include/asm-x86_64/acpi.h8
-rw-r--r--include/asm-x86_64/apic.h2
-rw-r--r--include/asm-x86_64/apicdef.h2
-rw-r--r--include/asm-x86_64/io_apic.h2
-rw-r--r--include/asm-x86_64/irq.h5
-rw-r--r--include/asm-x86_64/kdebug.h2
-rw-r--r--include/asm-x86_64/kexec.h33
-rw-r--r--include/asm-x86_64/page.h6
-rw-r--r--include/asm-x86_64/pci.h12
-rw-r--r--include/asm-x86_64/proto.h7
-rw-r--r--include/asm-x86_64/serial.h102
-rw-r--r--include/asm-x86_64/smp.h4
-rw-r--r--include/asm-x86_64/suspend.h2
-rw-r--r--include/asm-x86_64/tlbflush.h12
-rw-r--r--include/asm-x86_64/topology.h10
-rw-r--r--include/asm-x86_64/unistd.h8
16 files changed, 93 insertions, 124 deletions
diff --git a/include/asm-x86_64/acpi.h b/include/asm-x86_64/acpi.h
index a6b41b89206..dc8c981af27 100644
--- a/include/asm-x86_64/acpi.h
+++ b/include/asm-x86_64/acpi.h
@@ -28,6 +28,8 @@
#ifdef __KERNEL__
+#include <acpi/pdc_intel.h>
+
#define COMPILER_DEPENDENT_INT64 long long
#define COMPILER_DEPENDENT_UINT64 unsigned long long
@@ -99,12 +101,6 @@ __acpi_release_global_lock (unsigned int *lock)
:"=r"(n_hi), "=r"(n_lo) \
:"0"(n_hi), "1"(n_lo))
-/*
- * Refer Intel ACPI _PDC support document for bit definitions
- */
-#define ACPI_PDC_EST_CAPABILITY_SMP 0xa
-#define ACPI_PDC_EST_CAPABILITY_MSR 0x1
-
#ifdef CONFIG_ACPI_BOOT
extern int acpi_lapic;
extern int acpi_ioapic;
diff --git a/include/asm-x86_64/apic.h b/include/asm-x86_64/apic.h
index e4b1017b8b2..16ec82e16b2 100644
--- a/include/asm-x86_64/apic.h
+++ b/include/asm-x86_64/apic.h
@@ -77,7 +77,7 @@ static inline void ack_APIC_irq(void)
extern int get_maxlvt (void);
extern void clear_local_APIC (void);
extern void connect_bsp_APIC (void);
-extern void disconnect_bsp_APIC (void);
+extern void disconnect_bsp_APIC (int virt_wire_setup);
extern void disable_local_APIC (void);
extern int verify_local_APIC (void);
extern void cache_APIC_registers (void);
diff --git a/include/asm-x86_64/apicdef.h b/include/asm-x86_64/apicdef.h
index bfebdb69065..9388062c4f6 100644
--- a/include/asm-x86_64/apicdef.h
+++ b/include/asm-x86_64/apicdef.h
@@ -94,7 +94,7 @@
#define SET_APIC_DELIVERY_MODE(x,y) (((x)&~0x700)|((y)<<8))
#define APIC_MODE_FIXED 0x0
#define APIC_MODE_NMI 0x4
-#define APIC_MODE_EXINT 0x7
+#define APIC_MODE_EXTINT 0x7
#define APIC_LVT1 0x360
#define APIC_LVTERR 0x370
#define APIC_TMICT 0x380
diff --git a/include/asm-x86_64/io_apic.h b/include/asm-x86_64/io_apic.h
index 32573749004..a8babd2bbe8 100644
--- a/include/asm-x86_64/io_apic.h
+++ b/include/asm-x86_64/io_apic.h
@@ -217,4 +217,6 @@ extern int assign_irq_vector(int irq);
void enable_NMI_through_LVT0 (void * dummy);
+extern spinlock_t i8259A_lock;
+
#endif
diff --git a/include/asm-x86_64/irq.h b/include/asm-x86_64/irq.h
index 3af50b3c3b0..eb3b7aa9eb9 100644
--- a/include/asm-x86_64/irq.h
+++ b/include/asm-x86_64/irq.h
@@ -52,4 +52,9 @@ struct irqaction;
struct pt_regs;
int handle_IRQ_event(unsigned int, struct pt_regs *, struct irqaction *);
+#ifdef CONFIG_HOTPLUG_CPU
+#include <linux/cpumask.h>
+extern void fixup_irqs(cpumask_t map);
+#endif
+
#endif /* _ASM_IRQ_H */
diff --git a/include/asm-x86_64/kdebug.h b/include/asm-x86_64/kdebug.h
index 6277f75cbb4..b90341994d8 100644
--- a/include/asm-x86_64/kdebug.h
+++ b/include/asm-x86_64/kdebug.h
@@ -14,7 +14,7 @@ struct die_args {
};
/* Note - you should never unregister because that can race with NMIs.
- If you really want to do it first unregister - then synchronize_kernel - then free.
+ If you really want to do it first unregister - then synchronize_sched - then free.
*/
int register_die_notifier(struct notifier_block *nb);
extern struct notifier_block *die_chain;
diff --git a/include/asm-x86_64/kexec.h b/include/asm-x86_64/kexec.h
new file mode 100644
index 00000000000..42d2ff15c59
--- /dev/null
+++ b/include/asm-x86_64/kexec.h
@@ -0,0 +1,33 @@
+#ifndef _X86_64_KEXEC_H
+#define _X86_64_KEXEC_H
+
+#include <asm/page.h>
+#include <asm/proto.h>
+
+/*
+ * KEXEC_SOURCE_MEMORY_LIMIT maximum page get_free_page can return.
+ * I.e. Maximum page that is mapped directly into kernel memory,
+ * and kmap is not required.
+ *
+ * So far x86_64 is limited to 40 physical address bits.
+ */
+
+/* Maximum physical address we can use pages from */
+#define KEXEC_SOURCE_MEMORY_LIMIT (0xFFFFFFFFFFUL)
+/* Maximum address we can reach in physical address mode */
+#define KEXEC_DESTINATION_MEMORY_LIMIT (0xFFFFFFFFFFUL)
+/* Maximum address we can use for the control pages */
+#define KEXEC_CONTROL_MEMORY_LIMIT (0xFFFFFFFFFFUL)
+
+/* Allocate one page for the pdp and the second for the code */
+#define KEXEC_CONTROL_CODE_SIZE (4096UL + 4096UL)
+
+/* The native architecture */
+#define KEXEC_ARCH KEXEC_ARCH_X86_64
+
+#define MAX_NOTE_BYTES 1024
+typedef u32 note_buf_t[MAX_NOTE_BYTES/4];
+
+extern note_buf_t crash_notes[];
+
+#endif /* _X86_64_KEXEC_H */
diff --git a/include/asm-x86_64/page.h b/include/asm-x86_64/page.h
index 60130f4ca98..431318764af 100644
--- a/include/asm-x86_64/page.h
+++ b/include/asm-x86_64/page.h
@@ -64,12 +64,14 @@ typedef struct { unsigned long pgprot; } pgprot_t;
#define __pgd(x) ((pgd_t) { (x) } )
#define __pgprot(x) ((pgprot_t) { (x) } )
-#define __START_KERNEL 0xffffffff80100000UL
+#define __PHYSICAL_START ((unsigned long)CONFIG_PHYSICAL_START)
+#define __START_KERNEL (__START_KERNEL_map + __PHYSICAL_START)
#define __START_KERNEL_map 0xffffffff80000000UL
#define __PAGE_OFFSET 0xffff810000000000UL
#else
-#define __START_KERNEL 0xffffffff80100000
+#define __PHYSICAL_START CONFIG_PHYSICAL_START
+#define __START_KERNEL (__START_KERNEL_map + __PHYSICAL_START)
#define __START_KERNEL_map 0xffffffff80000000
#define __PAGE_OFFSET 0xffff810000000000
#endif /* !__ASSEMBLY__ */
diff --git a/include/asm-x86_64/pci.h b/include/asm-x86_64/pci.h
index 8712520ca47..eeb3088a1c9 100644
--- a/include/asm-x86_64/pci.h
+++ b/include/asm-x86_64/pci.h
@@ -33,7 +33,7 @@ extern int (*pci_config_read)(int seg, int bus, int dev, int fn, int reg, int le
extern int (*pci_config_write)(int seg, int bus, int dev, int fn, int reg, int len, u32 value);
void pcibios_set_master(struct pci_dev *dev);
-void pcibios_penalize_isa_irq(int irq);
+void pcibios_penalize_isa_irq(int irq, int active);
struct irq_routing_table *pcibios_get_irq_routing_table(void);
int pcibios_set_irq_routing(struct pci_dev *dev, int pin, int irq);
@@ -123,6 +123,16 @@ pci_dac_dma_sync_single_for_device(struct pci_dev *pdev, dma64_addr_t dma_addr,
flush_write_buffers();
}
+#ifdef CONFIG_PCI
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+ enum pci_dma_burst_strategy *strat,
+ unsigned long *strategy_parameter)
+{
+ *strat = PCI_DMA_BURST_INFINITY;
+ *strategy_parameter = ~0UL;
+}
+#endif
+
#define HAVE_PCI_MMAP
extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
enum pci_mmap_state mmap_state, int write_combine);
diff --git a/include/asm-x86_64/proto.h b/include/asm-x86_64/proto.h
index f2f073642d6..6c813eb521f 100644
--- a/include/asm-x86_64/proto.h
+++ b/include/asm-x86_64/proto.h
@@ -15,6 +15,13 @@ extern void pda_init(int);
extern void early_idt_handler(void);
extern void mcheck_init(struct cpuinfo_x86 *c);
+#ifdef CONFIG_MTRR
+extern void mtrr_ap_init(void);
+extern void mtrr_bp_init(void);
+#else
+#define mtrr_ap_init() do {} while (0)
+#define mtrr_bp_init() do {} while (0)
+#endif
extern void init_memory_mapping(unsigned long start, unsigned long end);
extern void system_call(void);
diff --git a/include/asm-x86_64/serial.h b/include/asm-x86_64/serial.h
index dbab232044c..dc752eafa68 100644
--- a/include/asm-x86_64/serial.h
+++ b/include/asm-x86_64/serial.h
@@ -22,109 +22,9 @@
#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
#endif
-#ifdef CONFIG_SERIAL_MANY_PORTS
-#define FOURPORT_FLAGS ASYNC_FOURPORT
-#define ACCENT_FLAGS 0
-#define BOCA_FLAGS 0
-#define HUB6_FLAGS 0
-#endif
-
-#define MCA_COM_FLAGS (STD_COM_FLAGS|ASYNC_BOOT_ONLYMCA)
-
-/*
- * The following define the access methods for the HUB6 card. All
- * access is through two ports for all 24 possible chips. The card is
- * selected through the high 2 bits, the port on that card with the
- * "middle" 3 bits, and the register on that port with the bottom
- * 3 bits.
- *
- * While the access port and interrupt is configurable, the default
- * port locations are 0x302 for the port control register, and 0x303
- * for the data read/write register. Normally, the interrupt is at irq3
- * but can be anything from 3 to 7 inclusive. Note that using 3 will
- * require disabling com2.
- */
-
-#define C_P(card,port) (((card)<<6|(port)<<3) + 1)
-
-#define STD_SERIAL_PORT_DEFNS \
+#define SERIAL_PORT_DFNS \
/* UART CLK PORT IRQ FLAGS */ \
{ 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS }, /* ttyS0 */ \
{ 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS }, /* ttyS1 */ \
{ 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS }, /* ttyS2 */ \
{ 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS }, /* ttyS3 */
-
-
-#ifdef CONFIG_SERIAL_MANY_PORTS
-#define EXTRA_SERIAL_PORT_DEFNS \
- { 0, BASE_BAUD, 0x1A0, 9, FOURPORT_FLAGS }, /* ttyS4 */ \
- { 0, BASE_BAUD, 0x1A8, 9, FOURPORT_FLAGS }, /* ttyS5 */ \
- { 0, BASE_BAUD, 0x1B0, 9, FOURPORT_FLAGS }, /* ttyS6 */ \
- { 0, BASE_BAUD, 0x1B8, 9, FOURPORT_FLAGS }, /* ttyS7 */ \
- { 0, BASE_BAUD, 0x2A0, 5, FOURPORT_FLAGS }, /* ttyS8 */ \
- { 0, BASE_BAUD, 0x2A8, 5, FOURPORT_FLAGS }, /* ttyS9 */ \
- { 0, BASE_BAUD, 0x2B0, 5, FOURPORT_FLAGS }, /* ttyS10 */ \
- { 0, BASE_BAUD, 0x2B8, 5, FOURPORT_FLAGS }, /* ttyS11 */ \
- { 0, BASE_BAUD, 0x330, 4, ACCENT_FLAGS }, /* ttyS12 */ \
- { 0, BASE_BAUD, 0x338, 4, ACCENT_FLAGS }, /* ttyS13 */ \
- { 0, BASE_BAUD, 0x000, 0, 0 }, /* ttyS14 (spare) */ \
- { 0, BASE_BAUD, 0x000, 0, 0 }, /* ttyS15 (spare) */ \
- { 0, BASE_BAUD, 0x100, 12, BOCA_FLAGS }, /* ttyS16 */ \
- { 0, BASE_BAUD, 0x108, 12, BOCA_FLAGS }, /* ttyS17 */ \
- { 0, BASE_BAUD, 0x110, 12, BOCA_FLAGS }, /* ttyS18 */ \
- { 0, BASE_BAUD, 0x118, 12, BOCA_FLAGS }, /* ttyS19 */ \
- { 0, BASE_BAUD, 0x120, 12, BOCA_FLAGS }, /* ttyS20 */ \
- { 0, BASE_BAUD, 0x128, 12, BOCA_FLAGS }, /* ttyS21 */ \
- { 0, BASE_BAUD, 0x130, 12, BOCA_FLAGS }, /* ttyS22 */ \
- { 0, BASE_BAUD, 0x138, 12, BOCA_FLAGS }, /* ttyS23 */ \
- { 0, BASE_BAUD, 0x140, 12, BOCA_FLAGS }, /* ttyS24 */ \
- { 0, BASE_BAUD, 0x148, 12, BOCA_FLAGS }, /* ttyS25 */ \
- { 0, BASE_BAUD, 0x150, 12, BOCA_FLAGS }, /* ttyS26 */ \
- { 0, BASE_BAUD, 0x158, 12, BOCA_FLAGS }, /* ttyS27 */ \
- { 0, BASE_BAUD, 0x160, 12, BOCA_FLAGS }, /* ttyS28 */ \
- { 0, BASE_BAUD, 0x168, 12, BOCA_FLAGS }, /* ttyS29 */ \
- { 0, BASE_BAUD, 0x170, 12, BOCA_FLAGS }, /* ttyS30 */ \
- { 0, BASE_BAUD, 0x178, 12, BOCA_FLAGS }, /* ttyS31 */
-#else
-#define EXTRA_SERIAL_PORT_DEFNS
-#endif
-
-/* You can have up to four HUB6's in the system, but I've only
- * included two cards here for a total of twelve ports.
- */
-#if (defined(CONFIG_HUB6) && defined(CONFIG_SERIAL_MANY_PORTS))
-#define HUB6_SERIAL_PORT_DFNS \
- { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,0) }, /* ttyS32 */ \
- { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,1) }, /* ttyS33 */ \
- { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,2) }, /* ttyS34 */ \
- { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,3) }, /* ttyS35 */ \
- { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,4) }, /* ttyS36 */ \
- { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,5) }, /* ttyS37 */ \
- { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,0) }, /* ttyS38 */ \
- { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,1) }, /* ttyS39 */ \
- { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,2) }, /* ttyS40 */ \
- { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,3) }, /* ttyS41 */ \
- { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,4) }, /* ttyS42 */ \
- { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,5) }, /* ttyS43 */
-#else
-#define HUB6_SERIAL_PORT_DFNS
-#endif
-
-#ifdef CONFIG_MCA
-#define MCA_SERIAL_PORT_DFNS \
- { 0, BASE_BAUD, 0x3220, 3, MCA_COM_FLAGS }, \
- { 0, BASE_BAUD, 0x3228, 3, MCA_COM_FLAGS }, \
- { 0, BASE_BAUD, 0x4220, 3, MCA_COM_FLAGS }, \
- { 0, BASE_BAUD, 0x4228, 3, MCA_COM_FLAGS }, \
- { 0, BASE_BAUD, 0x5220, 3, MCA_COM_FLAGS }, \
- { 0, BASE_BAUD, 0x5228, 3, MCA_COM_FLAGS },
-#else
-#define MCA_SERIAL_PORT_DFNS
-#endif
-
-#define SERIAL_PORT_DFNS \
- STD_SERIAL_PORT_DEFNS \
- EXTRA_SERIAL_PORT_DEFNS \
- HUB6_SERIAL_PORT_DFNS \
- MCA_SERIAL_PORT_DFNS
-
diff --git a/include/asm-x86_64/smp.h b/include/asm-x86_64/smp.h
index a7425aa5a3b..aeb1b73e21e 100644
--- a/include/asm-x86_64/smp.h
+++ b/include/asm-x86_64/smp.h
@@ -43,6 +43,8 @@ extern cpumask_t cpu_callout_map;
extern void smp_alloc_memory(void);
extern volatile unsigned long smp_invalidate_needed;
extern int pic_mode;
+extern void lock_ipi_call_lock(void);
+extern void unlock_ipi_call_lock(void);
extern int smp_num_siblings;
extern void smp_flush_tlb(void);
extern void smp_message_irq(int cpl, void *dev_id, struct pt_regs *regs);
@@ -77,6 +79,8 @@ extern __inline int hard_smp_processor_id(void)
}
extern int safe_smp_processor_id(void);
+extern int __cpu_disable(void);
+extern void __cpu_die(unsigned int cpu);
#endif /* !ASSEMBLY */
diff --git a/include/asm-x86_64/suspend.h b/include/asm-x86_64/suspend.h
index ec745807fea..bb9f40597d0 100644
--- a/include/asm-x86_64/suspend.h
+++ b/include/asm-x86_64/suspend.h
@@ -16,7 +16,7 @@ arch_prepare_suspend(void)
struct saved_context {
u16 ds, es, fs, gs, ss;
unsigned long gs_base, gs_kernel_base, fs_base;
- unsigned long cr0, cr2, cr3, cr4;
+ unsigned long cr0, cr2, cr3, cr4, cr8;
u16 gdt_pad;
u16 gdt_limit;
unsigned long gdt_base;
diff --git a/include/asm-x86_64/tlbflush.h b/include/asm-x86_64/tlbflush.h
index 2e811ac262a..06174238252 100644
--- a/include/asm-x86_64/tlbflush.h
+++ b/include/asm-x86_64/tlbflush.h
@@ -22,16 +22,18 @@
*/
#define __flush_tlb_global() \
do { \
- unsigned long tmpreg; \
+ unsigned long tmpreg, cr4, cr4_orig; \
\
__asm__ __volatile__( \
- "movq %1, %%cr4; # turn off PGE \n" \
+ "movq %%cr4, %2; # turn off PGE \n" \
+ "movq %2, %1; \n" \
+ "andq %3, %1; \n" \
+ "movq %1, %%cr4; \n" \
"movq %%cr3, %0; # flush TLB \n" \
"movq %0, %%cr3; \n" \
"movq %2, %%cr4; # turn PGE back on \n" \
- : "=&r" (tmpreg) \
- : "r" (mmu_cr4_features & ~X86_CR4_PGE), \
- "r" (mmu_cr4_features) \
+ : "=&r" (tmpreg), "=&r" (cr4), "=&r" (cr4_orig) \
+ : "i" (~X86_CR4_PGE) \
: "memory"); \
} while (0)
diff --git a/include/asm-x86_64/topology.h b/include/asm-x86_64/topology.h
index 8f77e9f6bc2..c1bc3fad482 100644
--- a/include/asm-x86_64/topology.h
+++ b/include/asm-x86_64/topology.h
@@ -39,12 +39,16 @@ extern int __node_distance(int, int);
.busy_factor = 32, \
.imbalance_pct = 125, \
.cache_hot_time = (10*1000000), \
- .cache_nice_tries = 1, \
+ .cache_nice_tries = 2, \
+ .busy_idx = 3, \
+ .idle_idx = 2, \
+ .newidle_idx = 0, \
+ .wake_idx = 1, \
+ .forkexec_idx = 1, \
.per_cpu_gain = 100, \
.flags = SD_LOAD_BALANCE \
- | SD_BALANCE_NEWIDLE \
+ | SD_BALANCE_FORK \
| SD_BALANCE_EXEC \
- | SD_WAKE_IDLE \
| SD_WAKE_BALANCE, \
.last_balance = jiffies, \
.balance_interval = 1, \
diff --git a/include/asm-x86_64/unistd.h b/include/asm-x86_64/unistd.h
index 3c9af6fd433..6560439a83e 100644
--- a/include/asm-x86_64/unistd.h
+++ b/include/asm-x86_64/unistd.h
@@ -552,7 +552,7 @@ __SYSCALL(__NR_mq_notify, sys_mq_notify)
#define __NR_mq_getsetattr 245
__SYSCALL(__NR_mq_getsetattr, sys_mq_getsetattr)
#define __NR_kexec_load 246
-__SYSCALL(__NR_kexec_load, sys_ni_syscall)
+__SYSCALL(__NR_kexec_load, sys_kexec_load)
#define __NR_waitid 247
__SYSCALL(__NR_waitid, sys_waitid)
#define __NR_add_key 248
@@ -561,8 +561,12 @@ __SYSCALL(__NR_add_key, sys_add_key)
__SYSCALL(__NR_request_key, sys_request_key)
#define __NR_keyctl 250
__SYSCALL(__NR_keyctl, sys_keyctl)
+#define __NR_ioprio_set 251
+__SYSCALL(__NR_ioprio_set, sys_ioprio_set)
+#define __NR_ioprio_get 252
+__SYSCALL(__NR_ioprio_get, sys_ioprio_get)
-#define __NR_syscall_max __NR_keyctl
+#define __NR_syscall_max __NR_ioprio_get
#ifndef __NO_STUBS
/* user-visible error numbers are in the range -1 - -4095 */
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-17 21:37:43 +0000