1 files changed, 423 insertions, 0 deletions
diff --git a/include/asm-x86/bitops_32.h b/include/asm-x86/bitops_32.h
new file mode 100644
index 00000000000..a20fe9822f6
--- /dev/null
+++ b/include/asm-x86/bitops_32.h
@@ -0,0 +1,423 @@
+#ifndef _I386_BITOPS_H
+#define _I386_BITOPS_H
+
+/*
+ * Copyright 1992, Linus Torvalds.
+ */
+
+#include <linux/compiler.h>
+#include <asm/alternative.h>
+
+/*
+ * These have to be done with inline assembly: that way the bit-setting
+ * is guaranteed to be atomic. All bit operations return 0 if the bit
+ * was cleared before the operation and != 0 if it was not.
+ *
+ * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1).
+ */
+
+#define ADDR (*(volatile long *) addr)
+
+/**
+ * set_bit - Atomically set a bit in memory
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * This function is atomic and may not be reordered.  See __set_bit()
+ * if you do not require the atomic guarantees.
+ *
+ * Note: there are no guarantees that this function will not be reordered
+ * on non x86 architectures, so if you are writing portable code,
+ * make sure not to rely on its reordering guarantees.
+ *
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+static inline void set_bit(int nr, volatile unsigned long * addr)
+{
+	__asm__ __volatile__( LOCK_PREFIX
+		"btsl %1,%0"
+		:"+m" (ADDR)
+		:"Ir" (nr));
+}
+
+/**
+ * __set_bit - Set a bit in memory
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * Unlike set_bit(), this function is non-atomic and may be reordered.
+ * If it's called on the same region of memory simultaneously, the effect
+ * may be that only one operation succeeds.
+ */
+static inline void __set_bit(int nr, volatile unsigned long * addr)
+{
+	__asm__(
+		"btsl %1,%0"
+		:"+m" (ADDR)
+		:"Ir" (nr));
+}
+
+/**
+ * clear_bit - Clears a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * clear_bit() is atomic and may not be reordered.  However, it does
+ * not contain a memory barrier, so if it is used for locking purposes,
+ * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
+ * in order to ensure changes are visible on other processors.
+ */
+static inline void clear_bit(int nr, volatile unsigned long * addr)
+{
+	__asm__ __volatile__( LOCK_PREFIX
+		"btrl %1,%0"
+		:"+m" (ADDR)
+		:"Ir" (nr));
+}
+
+static inline void __clear_bit(int nr, volatile unsigned long * addr)
+{
+	__asm__ __volatile__(
+		"btrl %1,%0"
+		:"+m" (ADDR)
+		:"Ir" (nr));
+}
+#define smp_mb__before_clear_bit()	barrier()
+#define smp_mb__after_clear_bit()	barrier()
+
+/**
+ * __change_bit - Toggle a bit in memory
+ * @nr: the bit to change
+ * @addr: the address to start counting from
+ *
+ * Unlike change_bit(), this function is non-atomic and may be reordered.
+ * If it's called on the same region of memory simultaneously, the effect
+ * may be that only one operation succeeds.
+ */
+static inline void __change_bit(int nr, volatile unsigned long * addr)
+{
+	__asm__ __volatile__(
+		"btcl %1,%0"
+		:"+m" (ADDR)
+		:"Ir" (nr));
+}
+
+/**
+ * change_bit - Toggle a bit in memory
+ * @nr: Bit to change
+ * @addr: Address to start counting from
+ *
+ * change_bit() is atomic and may not be reordered. It may be
+ * reordered on other architectures than x86.
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+static inline void change_bit(int nr, volatile unsigned long * addr)
+{
+	__asm__ __volatile__( LOCK_PREFIX
+		"btcl %1,%0"
+		:"+m" (ADDR)
+		:"Ir" (nr));
+}
+
+/**
+ * test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.  
+ * It may be reordered on other architectures than x86.
+ * It also implies a memory barrier.
+ */
+static inline int test_and_set_bit(int nr, volatile unsigned long * addr)
+{
+	int oldbit;
+
+	__asm__ __volatile__( LOCK_PREFIX
+		"btsl %2,%1\n\tsbbl %0,%0"
+		:"=r" (oldbit),"+m" (ADDR)
+		:"Ir" (nr) : "memory");
+	return oldbit;
+}
+
+/**
+ * __test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is non-atomic and can be reordered.  
+ * If two examples of this operation race, one can appear to succeed
+ * but actually fail.  You must protect multiple accesses with a lock.
+ */
+static inline int __test_and_set_bit(int nr, volatile unsigned long * addr)
+{
+	int oldbit;
+
+	__asm__(
+		"btsl %2,%1\n\tsbbl %0,%0"
+		:"=r" (oldbit),"+m" (ADDR)
+		:"Ir" (nr));
+	return oldbit;
+}
+
+/**
+ * test_and_clear_bit - Clear a bit and return its old value
+ * @nr: Bit to clear
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It can be reorderdered on other architectures other than x86.
+ * It also implies a memory barrier.
+ */
+static inline int test_and_clear_bit(int nr, volatile unsigned long * addr)
+{
+	int oldbit;
+
+	__asm__ __volatile__( LOCK_PREFIX
+		"btrl %2,%1\n\tsbbl %0,%0"
+		:"=r" (oldbit),"+m" (ADDR)
+		:"Ir" (nr) : "memory");
+	return oldbit;
+}
+
+/**
+ * __test_and_clear_bit - Clear a bit and return its old value
+ * @nr: Bit to clear
+ * @addr: Address to count from
+ *
+ * This operation is non-atomic and can be reordered.  
+ * If two examples of this operation race, one can appear to succeed
+ * but actually fail.  You must protect multiple accesses with a lock.
+ */
+static inline int __test_and_clear_bit(int nr, volatile unsigned long *addr)
+{
+	int oldbit;
+
+	__asm__(
+		"btrl %2,%1\n\tsbbl %0,%0"
+		:"=r" (oldbit),"+m" (ADDR)
+		:"Ir" (nr));
+	return oldbit;
+}
+
+/* WARNING: non atomic and it can be reordered! */
+static inline int __test_and_change_bit(int nr, volatile unsigned long *addr)
+{
+	int oldbit;
+
+	__asm__ __volatile__(
+		"btcl %2,%1\n\tsbbl %0,%0"
+		:"=r" (oldbit),"+m" (ADDR)
+		:"Ir" (nr) : "memory");
+	return oldbit;
+}
+
+/**
+ * test_and_change_bit - Change a bit and return its old value
+ * @nr: Bit to change
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.  
+ * It also implies a memory barrier.
+ */
+static inline int test_and_change_bit(int nr, volatile unsigned long* addr)
+{
+	int oldbit;
+
+	__asm__ __volatile__( LOCK_PREFIX
+		"btcl %2,%1\n\tsbbl %0,%0"
+		:"=r" (oldbit),"+m" (ADDR)
+		:"Ir" (nr) : "memory");
+	return oldbit;
+}
+
+#if 0 /* Fool kernel-doc since it doesn't do macros yet */
+/**
+ * test_bit - Determine whether a bit is set
+ * @nr: bit number to test
+ * @addr: Address to start counting from
+ */
+static int test_bit(int nr, const volatile void * addr);
+#endif
+
+static __always_inline int constant_test_bit(int nr, const volatile unsigned long *addr)
+{
+	return ((1UL << (nr & 31)) & (addr[nr >> 5])) != 0;
+}
+
+static inline int variable_test_bit(int nr, const volatile unsigned long * addr)
+{
+	int oldbit;
+
+	__asm__ __volatile__(
+		"btl %2,%1\n\tsbbl %0,%0"
+		:"=r" (oldbit)
+		:"m" (ADDR),"Ir" (nr));
+	return oldbit;
+}
+
+#define test_bit(nr,addr) \
+(__builtin_constant_p(nr) ? \
+ constant_test_bit((nr),(addr)) : \
+ variable_test_bit((nr),(addr)))
+
+#undef ADDR
+
+/**
+ * find_first_zero_bit - find the first zero bit in a memory region
+ * @addr: The address to start the search at
+ * @size: The maximum size to search
+ *
+ * Returns the bit-number of the first zero bit, not the number of the byte
+ * containing a bit.
+ */
+static inline int find_first_zero_bit(const unsigned long *addr, unsigned size)
+{
+	int d0, d1, d2;
+	int res;
+
+	if (!size)
+		return 0;
+	/* This looks at memory. Mark it volatile to tell gcc not to move it around */
+	__asm__ __volatile__(
+		"movl $-1,%%eax\n\t"
+		"xorl %%edx,%%edx\n\t"
+		"repe; scasl\n\t"
+		"je 1f\n\t"
+		"xorl -4(%%edi),%%eax\n\t"
+		"subl $4,%%edi\n\t"
+		"bsfl %%eax,%%edx\n"
+		"1:\tsubl %%ebx,%%edi\n\t"
+		"shll $3,%%edi\n\t"
+		"addl %%edi,%%edx"
+		:"=d" (res), "=&c" (d0), "=&D" (d1), "=&a" (d2)
+		:"1" ((size + 31) >> 5), "2" (addr), "b" (addr) : "memory");
+	return res;
+}
+
+/**
+ * find_next_zero_bit - find the first zero bit in a memory region
+ * @addr: The address to base the search on
+ * @offset: The bitnumber to start searching at
+ * @size: The maximum size to search
+ */
+int find_next_zero_bit(const unsigned long *addr, int size, int offset);
+
+/**
+ * __ffs - find first bit in word.
+ * @word: The word to search
+ *
+ * Undefined if no bit exists, so code should check against 0 first.
+ */
+static inline unsigned long __ffs(unsigned long word)
+{
+	__asm__("bsfl %1,%0"
+		:"=r" (word)
+		:"rm" (word));
+	return word;
+}
+
+/**
+ * find_first_bit - find the first set bit in a memory region
+ * @addr: The address to start the search at
+ * @size: The maximum size to search
+ *
+ * Returns the bit-number of the first set bit, not the number of the byte
+ * containing a bit.
+ */
+static inline unsigned find_first_bit(const unsigned long *addr, unsigned size)
+{
+	unsigned x = 0;
+
+	while (x < size) {
+		unsigned long val = *addr++;
+		if (val)
+			return __ffs(val) + x;
+		x += (sizeof(*addr)<<3);
+	}
+	return x;
+}
+
+/**
+ * find_next_bit - find the first set bit in a memory region
+ * @addr: The address to base the search on
+ * @offset: The bitnumber to start searching at
+ * @size: The maximum size to search
+ */
+int find_next_bit(const unsigned long *addr, int size, int offset);
+
+/**
+ * ffz - find first zero in word.
+ * @word: The word to search
+ *
+ * Undefined if no zero exists, so code should check against ~0UL first.
+ */
+static inline unsigned long ffz(unsigned long word)
+{
+	__asm__("bsfl %1,%0"
+		:"=r" (word)
+		:"r" (~word));
+	return word;
+}
+
+#ifdef __KERNEL__
+
+#include <asm-generic/bitops/sched.h>
+
+/**
+ * ffs - find first bit set
+ * @x: the word to search
+ *
+ * This is defined the same way as
+ * the libc and compiler builtin ffs routines, therefore
+ * differs in spirit from the above ffz() (man ffs).
+ */
+static inline int ffs(int x)
+{
+	int r;
+
+	__asm__("bsfl %1,%0\n\t"
+		"jnz 1f\n\t"
+		"movl $-1,%0\n"
+		"1:" : "=r" (r) : "rm" (x));
+	return r+1;
+}
+
+/**
+ * fls - find last bit set
+ * @x: the word to search
+ *
+ * This is defined the same way as ffs().
+ */
+static inline int fls(int x)
+{
+	int r;
+
+	__asm__("bsrl %1,%0\n\t"
+		"jnz 1f\n\t"
+		"movl $-1,%0\n"
+		"1:" : "=r" (r) : "rm" (x));
+	return r+1;
+}
+
+#include <asm-generic/bitops/hweight.h>
+
+#endif /* __KERNEL__ */
+
+#include <asm-generic/bitops/fls64.h>
+
+#ifdef __KERNEL__
+
+#include <asm-generic/bitops/ext2-non-atomic.h>
+
+#define ext2_set_bit_atomic(lock,nr,addr) \
+        test_and_set_bit((nr),(unsigned long*)addr)
+#define ext2_clear_bit_atomic(lock,nr, addr) \
+	        test_and_clear_bit((nr),(unsigned long*)addr)
+
+#include <asm-generic/bitops/minix.h>
+
+#endif /* __KERNEL__ */
+
+#endif /* _I386_BITOPS_H */