diff options
Diffstat (limited to 'include/asm-sparc')
152 files changed, 16150 insertions, 0 deletions
diff --git a/include/asm-sparc/a.out.h b/include/asm-sparc/a.out.h new file mode 100644 index 00000000000..e4e83eb0161 --- /dev/null +++ b/include/asm-sparc/a.out.h @@ -0,0 +1,98 @@ +/* $Id: a.out.h,v 1.13 2000/01/09 10:46:53 anton Exp $ */ +#ifndef __SPARC_A_OUT_H__ +#define __SPARC_A_OUT_H__ + +#define SPARC_PGSIZE 0x2000 /* Thanks to the sun4 architecture... */ +#define SEGMENT_SIZE SPARC_PGSIZE /* whee... */ + +struct exec { + unsigned char a_dynamic:1; /* A __DYNAMIC is in this image */ + unsigned char a_toolversion:7; + unsigned char a_machtype; + unsigned short a_info; + unsigned long a_text; /* length of text, in bytes */ + unsigned long a_data; /* length of data, in bytes */ + unsigned long a_bss; /* length of bss, in bytes */ + unsigned long a_syms; /* length of symbol table, in bytes */ + unsigned long a_entry; /* where program begins */ + unsigned long a_trsize; + unsigned long a_drsize; +}; + +/* Where in the file does the text information begin? */ +#define N_TXTOFF(x) (N_MAGIC(x) == ZMAGIC ? 0 : sizeof (struct exec)) + +/* Where do the Symbols start? */ +#define N_SYMOFF(x) (N_TXTOFF(x) + (x).a_text + \ + (x).a_data + (x).a_trsize + \ + (x).a_drsize) + +/* Where does text segment go in memory after being loaded? */ +#define N_TXTADDR(x) (((N_MAGIC(x) == ZMAGIC) && \ + ((x).a_entry < SPARC_PGSIZE)) ? \ + 0 : SPARC_PGSIZE) + +/* And same for the data segment.. */ +#define N_DATADDR(x) (N_MAGIC(x)==OMAGIC ? \ + (N_TXTADDR(x) + (x).a_text) \ + : (_N_SEGMENT_ROUND (_N_TXTENDADDR(x)))) + +#define N_TRSIZE(a) ((a).a_trsize) +#define N_DRSIZE(a) ((a).a_drsize) +#define N_SYMSIZE(a) ((a).a_syms) + +/* + * Sparc relocation types + */ +enum reloc_type +{ + RELOC_8, + RELOC_16, + RELOC_32, /* simplest relocs */ + RELOC_DISP8, + RELOC_DISP16, + RELOC_DISP32, /* Disp's (pc-rel) */ + RELOC_WDISP30, + RELOC_WDISP22, /* SR word disp's */ + RELOC_HI22, + RELOC_22, /* SR 22-bit relocs */ + RELOC_13, + RELOC_LO10, /* SR 13&10-bit relocs */ + RELOC_SFA_BASE, + RELOC_SFA_OFF13, /* SR S.F.A. relocs */ + RELOC_BASE10, + RELOC_BASE13, + RELOC_BASE22, /* base_relative pic */ + RELOC_PC10, + RELOC_PC22, /* special pc-rel pic */ + RELOC_JMP_TBL, /* jmp_tbl_rel in pic */ + RELOC_SEGOFF16, /* ShLib offset-in-seg */ + RELOC_GLOB_DAT, + RELOC_JMP_SLOT, + RELOC_RELATIVE /* rtld relocs */ +}; + +/* + * Format of a relocation datum. + */ +struct relocation_info /* used when header.a_machtype == M_SPARC */ +{ + unsigned long r_address; /* relocation addr */ + unsigned int r_index:24; /* segment index or symbol index */ + unsigned int r_extern:1; /* if F, r_index==SEG#; if T, SYM idx */ + int r_pad:2; /* <unused> */ + enum reloc_type r_type:5; /* type of relocation to perform */ + long r_addend; /* addend for relocation value */ +}; + +#define N_RELOCATION_INFO_DECLARED 1 + +#ifdef __KERNEL__ + +#include <asm/page.h> + +#define STACK_TOP (PAGE_OFFSET - PAGE_SIZE) + +#endif /* __KERNEL__ */ + +#endif /* __SPARC_A_OUT_H__ */ diff --git a/include/asm-sparc/apc.h b/include/asm-sparc/apc.h new file mode 100644 index 00000000000..24e9a7d4d97 --- /dev/null +++ b/include/asm-sparc/apc.h @@ -0,0 +1,64 @@ +/* apc - Driver definitions for power management functions + * of Aurora Personality Chip (APC) on SPARCstation-4/5 and + * derivatives + * + * Copyright (c) 2001 Eric Brower (ebrower@usa.net) + * + */ + +#ifndef _SPARC_APC_H +#define _SPARC_APC_H + +#include <linux/ioctl.h> + +#define APC_IOC 'A' + +#define APCIOCGFANCTL _IOR(APC_IOC, 0x00, int) /* Get fan speed */ +#define APCIOCSFANCTL _IOW(APC_IOC, 0x01, int) /* Set fan speed */ + +#define APCIOCGCPWR _IOR(APC_IOC, 0x02, int) /* Get CPOWER state */ +#define APCIOCSCPWR _IOW(APC_IOC, 0x03, int) /* Set CPOWER state */ + +#define APCIOCGBPORT _IOR(APC_IOC, 0x04, int) /* Get BPORT state */ +#define APCIOCSBPORT _IOW(APC_IOC, 0x05, int) /* Set BPORT state */ + +/* + * Register offsets + */ +#define APC_IDLE_REG 0x00 +#define APC_FANCTL_REG 0x20 +#define APC_CPOWER_REG 0x24 +#define APC_BPORT_REG 0x30 + +#define APC_REGMASK 0x01 +#define APC_BPMASK 0x03 + +/* + * IDLE - CPU standby values (set to initiate standby) + */ +#define APC_IDLE_ON 0x01 + +/* + * FANCTL - Fan speed control state values + */ +#define APC_FANCTL_HI 0x00 /* Fan speed high */ +#define APC_FANCTL_LO 0x01 /* Fan speed low */ + +/* + * CPWR - Convenience power outlet state values + */ +#define APC_CPOWER_ON 0x00 /* Conv power on */ +#define APC_CPOWER_OFF 0x01 /* Conv power off */ + +/* + * BPA/BPB - Read-Write "Bit Ports" state values (reset to 0 at power-on) + * + * WARNING: Internal usage of bit ports is platform dependent-- + * don't modify BPORT settings unless you know what you are doing. + * + * On SS5 BPA seems to toggle onboard ethernet loopback... -E + */ +#define APC_BPORT_A 0x01 /* Bit Port A */ +#define APC_BPORT_B 0x02 /* Bit Port B */ + +#endif /* !(_SPARC_APC_H) */ diff --git a/include/asm-sparc/asi.h b/include/asm-sparc/asi.h new file mode 100644 index 00000000000..58c3754da92 --- /dev/null +++ b/include/asm-sparc/asi.h @@ -0,0 +1,112 @@ +/* $Id: asi.h,v 1.18 1998/03/09 14:04:46 jj Exp $ */ +#ifndef _SPARC_ASI_H +#define _SPARC_ASI_H + +/* asi.h: Address Space Identifier values for the sparc. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + * + * Pioneer work for sun4m: Paul Hatchman (paul@sfe.com.au) + * Joint edition for sun4c+sun4m: Pete A. Zaitcev <zaitcev@ipmce.su> + */ + +/* The first batch are for the sun4c. */ + +#define ASI_NULL1 0x00 +#define ASI_NULL2 0x01 + +/* sun4c and sun4 control registers and mmu/vac ops */ +#define ASI_CONTROL 0x02 +#define ASI_SEGMAP 0x03 +#define ASI_PTE 0x04 +#define ASI_HWFLUSHSEG 0x05 +#define ASI_HWFLUSHPAGE 0x06 +#define ASI_REGMAP 0x06 +#define ASI_HWFLUSHCONTEXT 0x07 + +#define ASI_USERTXT 0x08 +#define ASI_KERNELTXT 0x09 +#define ASI_USERDATA 0x0a +#define ASI_KERNELDATA 0x0b + +/* VAC Cache flushing on sun4c and sun4 */ +#define ASI_FLUSHSEG 0x0c +#define ASI_FLUSHPG 0x0d +#define ASI_FLUSHCTX 0x0e + +/* SPARCstation-5: only 6 bits are decoded. */ +/* wo = Write Only, rw = Read Write; */ +/* ss = Single Size, as = All Sizes; */ +#define ASI_M_RES00 0x00 /* Don't touch... */ +#define ASI_M_UNA01 0x01 /* Same here... */ +#define ASI_M_MXCC 0x02 /* Access to TI VIKING MXCC registers */ +#define ASI_M_FLUSH_PROBE 0x03 /* Reference MMU Flush/Probe; rw, ss */ +#define ASI_M_MMUREGS 0x04 /* MMU Registers; rw, ss */ +#define ASI_M_TLBDIAG 0x05 /* MMU TLB only Diagnostics */ +#define ASI_M_DIAGS 0x06 /* Reference MMU Diagnostics */ +#define ASI_M_IODIAG 0x07 /* MMU I/O TLB only Diagnostics */ +#define ASI_M_USERTXT 0x08 /* Same as ASI_USERTXT; rw, as */ +#define ASI_M_KERNELTXT 0x09 /* Same as ASI_KERNELTXT; rw, as */ +#define ASI_M_USERDATA 0x0A /* Same as ASI_USERDATA; rw, as */ +#define ASI_M_KERNELDATA 0x0B /* Same as ASI_KERNELDATA; rw, as */ +#define ASI_M_TXTC_TAG 0x0C /* Instruction Cache Tag; rw, ss */ +#define ASI_M_TXTC_DATA 0x0D /* Instruction Cache Data; rw, ss */ +#define ASI_M_DATAC_TAG 0x0E /* Data Cache Tag; rw, ss */ +#define ASI_M_DATAC_DATA 0x0F /* Data Cache Data; rw, ss */ + +/* The following cache flushing ASIs work only with the 'sta' + * instruction. Results are unpredictable for 'swap' and 'ldstuba', + * so don't do it. + */ + +/* These ASI flushes affect external caches too. */ +#define ASI_M_FLUSH_PAGE 0x10 /* Flush I&D Cache Line (page); wo, ss */ +#define ASI_M_FLUSH_SEG 0x11 /* Flush I&D Cache Line (seg); wo, ss */ +#define ASI_M_FLUSH_REGION 0x12 /* Flush I&D Cache Line (region); wo, ss */ +#define ASI_M_FLUSH_CTX 0x13 /* Flush I&D Cache Line (context); wo, ss */ +#define ASI_M_FLUSH_USER 0x14 /* Flush I&D Cache Line (user); wo, ss */ + +/* Block-copy operations are available only on certain V8 cpus. */ +#define ASI_M_BCOPY 0x17 /* Block copy */ + +/* These affect only the ICACHE and are Ross HyperSparc and TurboSparc specific. */ +#define ASI_M_IFLUSH_PAGE 0x18 /* Flush I Cache Line (page); wo, ss */ +#define ASI_M_IFLUSH_SEG 0x19 /* Flush I Cache Line (seg); wo, ss */ +#define ASI_M_IFLUSH_REGION 0x1A /* Flush I Cache Line (region); wo, ss */ +#define ASI_M_IFLUSH_CTX 0x1B /* Flush I Cache Line (context); wo, ss */ +#define ASI_M_IFLUSH_USER 0x1C /* Flush I Cache Line (user); wo, ss */ + +/* Block-fill operations are available on certain V8 cpus */ +#define ASI_M_BFILL 0x1F + +/* This allows direct access to main memory, actually 0x20 to 0x2f are + * the available ASI's for physical ram pass-through, but I don't have + * any idea what the other ones do.... + */ + +#define ASI_M_BYPASS 0x20 /* Reference MMU bypass; rw, as */ +#define ASI_M_FBMEM 0x29 /* Graphics card frame buffer access */ +#define ASI_M_VMEUS 0x2A /* VME user 16-bit access */ +#define ASI_M_VMEPS 0x2B /* VME priv 16-bit access */ +#define ASI_M_VMEUT 0x2C /* VME user 32-bit access */ +#define ASI_M_VMEPT 0x2D /* VME priv 32-bit access */ +#define ASI_M_SBUS 0x2E /* Direct SBus access */ +#define ASI_M_CTL 0x2F /* Control Space (ECC and MXCC are here) */ + + +/* This is ROSS HyperSparc only. */ +#define ASI_M_FLUSH_IWHOLE 0x31 /* Flush entire ICACHE; wo, ss */ + +/* Tsunami/Viking/TurboSparc i/d cache flash clear. */ +#define ASI_M_IC_FLCLEAR 0x36 +#define ASI_M_DC_FLCLEAR 0x37 + +#define ASI_M_DCDR 0x39 /* Data Cache Diagnostics Register rw, ss */ + +#define ASI_M_VIKING_TMP1 0x40 /* Emulation temporary 1 on Viking */ +/* only available on SuperSparc I */ +/* #define ASI_M_VIKING_TMP2 0x41 */ /* Emulation temporary 2 on Viking */ + +#define ASI_M_ACTION 0x4c /* Breakpoint Action Register (GNU/Viking) */ + +#endif /* _SPARC_ASI_H */ diff --git a/include/asm-sparc/asmmacro.h b/include/asm-sparc/asmmacro.h new file mode 100644 index 00000000000..0d4b65bd252 --- /dev/null +++ b/include/asm-sparc/asmmacro.h @@ -0,0 +1,46 @@ +/* asmmacro.h: Assembler macros. + * + * Copyright (C) 1996 David S. Miller (davem@caipfs.rutgers.edu) + */ + +#ifndef _SPARC_ASMMACRO_H +#define _SPARC_ASMMACRO_H + +#include <linux/config.h> +#include <asm/btfixup.h> +#include <asm/asi.h> + +#define GET_PROCESSOR4M_ID(reg) \ + rd %tbr, %reg; \ + srl %reg, 12, %reg; \ + and %reg, 3, %reg; + +#define GET_PROCESSOR4D_ID(reg) \ + lda [%g0] ASI_M_VIKING_TMP1, %reg; + +/* All trap entry points _must_ begin with this macro or else you + * lose. It makes sure the kernel has a proper window so that + * c-code can be called. + */ +#define SAVE_ALL_HEAD \ + sethi %hi(trap_setup), %l4; \ + jmpl %l4 + %lo(trap_setup), %l6; +#define SAVE_ALL \ + SAVE_ALL_HEAD \ + nop; + +/* All traps low-level code here must end with this macro. */ +#define RESTORE_ALL b ret_trap_entry; clr %l6; + +/* sun4 probably wants half word accesses to ASI_SEGMAP, while sun4c+ + likes byte accesses. These are to avoid ifdef mania. */ + +#ifdef CONFIG_SUN4 +#define lduXa lduha +#define stXa stha +#else +#define lduXa lduba +#define stXa stba +#endif + +#endif /* !(_SPARC_ASMMACRO_H) */ diff --git a/include/asm-sparc/atomic.h b/include/asm-sparc/atomic.h new file mode 100644 index 00000000000..37f6ab601c3 --- /dev/null +++ b/include/asm-sparc/atomic.h @@ -0,0 +1,158 @@ +/* atomic.h: These still suck, but the I-cache hit rate is higher. + * + * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu) + * Copyright (C) 2000 Anton Blanchard (anton@linuxcare.com.au) + * + * Additions by Keith M Wesolowski (wesolows@foobazco.org) based + * on asm-parisc/atomic.h Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>. + */ + +#ifndef __ARCH_SPARC_ATOMIC__ +#define __ARCH_SPARC_ATOMIC__ + +#include <linux/config.h> + +typedef struct { volatile int counter; } atomic_t; + +#ifdef __KERNEL__ + +#define ATOMIC_INIT(i) { (i) } + +extern int __atomic_add_return(int, atomic_t *); +extern void atomic_set(atomic_t *, int); + +#define atomic_read(v) ((v)->counter) + +#define atomic_add(i, v) ((void)__atomic_add_return( (int)(i), (v))) +#define atomic_sub(i, v) ((void)__atomic_add_return(-(int)(i), (v))) +#define atomic_inc(v) ((void)__atomic_add_return( 1, (v))) +#define atomic_dec(v) ((void)__atomic_add_return( -1, (v))) + +#define atomic_add_return(i, v) (__atomic_add_return( (int)(i), (v))) +#define atomic_sub_return(i, v) (__atomic_add_return(-(int)(i), (v))) +#define atomic_inc_return(v) (__atomic_add_return( 1, (v))) +#define atomic_dec_return(v) (__atomic_add_return( -1, (v))) + +#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0) + +/* + * atomic_inc_and_test - increment and test + * @v: pointer of type atomic_t + * + * Atomically increments @v by 1 + * and returns true if the result is zero, or false for all + * other cases. + */ +#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0) + +#define atomic_dec_and_test(v) (atomic_dec_return(v) == 0) +#define atomic_sub_and_test(i, v) (atomic_sub_return(i, v) == 0) + +/* This is the old 24-bit implementation. It's still used internally + * by some sparc-specific code, notably the semaphore implementation. + */ +typedef struct { volatile int counter; } atomic24_t; + +#ifndef CONFIG_SMP + +#define ATOMIC24_INIT(i) { (i) } +#define atomic24_read(v) ((v)->counter) +#define atomic24_set(v, i) (((v)->counter) = i) + +#else +/* We do the bulk of the actual work out of line in two common + * routines in assembler, see arch/sparc/lib/atomic.S for the + * "fun" details. + * + * For SMP the trick is you embed the spin lock byte within + * the word, use the low byte so signedness is easily retained + * via a quick arithmetic shift. It looks like this: + * + * ---------------------------------------- + * | signed 24-bit counter value | lock | atomic_t + * ---------------------------------------- + * 31 8 7 0 + */ + +#define ATOMIC24_INIT(i) { ((i) << 8) } + +static inline int atomic24_read(const atomic24_t *v) +{ + int ret = v->counter; + + while(ret & 0xff) + ret = v->counter; + + return ret >> 8; +} + +#define atomic24_set(v, i) (((v)->counter) = ((i) << 8)) +#endif + +static inline int __atomic24_add(int i, atomic24_t *v) +{ + register volatile int *ptr asm("g1"); + register int increment asm("g2"); + register int tmp1 asm("g3"); + register int tmp2 asm("g4"); + register int tmp3 asm("g7"); + + ptr = &v->counter; + increment = i; + + __asm__ __volatile__( + "mov %%o7, %%g4\n\t" + "call ___atomic24_add\n\t" + " add %%o7, 8, %%o7\n" + : "=&r" (increment), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3) + : "0" (increment), "r" (ptr) + : "memory", "cc"); + + return increment; +} + +static inline int __atomic24_sub(int i, atomic24_t *v) +{ + register volatile int *ptr asm("g1"); + register int increment asm("g2"); + register int tmp1 asm("g3"); + register int tmp2 asm("g4"); + register int tmp3 asm("g7"); + + ptr = &v->counter; + increment = i; + + __asm__ __volatile__( + "mov %%o7, %%g4\n\t" + "call ___atomic24_sub\n\t" + " add %%o7, 8, %%o7\n" + : "=&r" (increment), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3) + : "0" (increment), "r" (ptr) + : "memory", "cc"); + + return increment; +} + +#define atomic24_add(i, v) ((void)__atomic24_add((i), (v))) +#define atomic24_sub(i, v) ((void)__atomic24_sub((i), (v))) + +#define atomic24_dec_return(v) __atomic24_sub(1, (v)) +#define atomic24_inc_return(v) __atomic24_add(1, (v)) + +#define atomic24_sub_and_test(i, v) (__atomic24_sub((i), (v)) == 0) +#define atomic24_dec_and_test(v) (__atomic24_sub(1, (v)) == 0) + +#define atomic24_inc(v) ((void)__atomic24_add(1, (v))) +#define atomic24_dec(v) ((void)__atomic24_sub(1, (v))) + +#define atomic24_add_negative(i, v) (__atomic24_add((i), (v)) < 0) + +/* Atomic operations are already serializing */ +#define smp_mb__before_atomic_dec() barrier() +#define smp_mb__after_atomic_dec() barrier() +#define smp_mb__before_atomic_inc() barrier() +#define smp_mb__after_atomic_inc() barrier() + +#endif /* !(__KERNEL__) */ + +#endif /* !(__ARCH_SPARC_ATOMIC__) */ diff --git a/include/asm-sparc/audioio.h b/include/asm-sparc/audioio.h new file mode 100644 index 00000000000..cf16173f521 --- /dev/null +++ b/include/asm-sparc/audioio.h @@ -0,0 +1,234 @@ +/* + * include/asm-sparc/audioio.h + * + * Sparc Audio Midlayer + * Copyright (C) 1996 Thomas K. Dyas (tdyas@noc.rutgers.edu) + */ + +#ifndef _AUDIOIO_H_ +#define _AUDIOIO_H_ + +/* + * SunOS/Solaris /dev/audio interface + */ + +#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) +#include <linux/types.h> +#include <linux/time.h> +#include <linux/ioctl.h> +#endif + +/* + * This structure contains state information for audio device IO streams. + */ +typedef struct audio_prinfo { + /* + * The following values describe the audio data encoding. + */ + unsigned int sample_rate; /* samples per second */ + unsigned int channels; /* number of interleaved channels */ + unsigned int precision; /* bit-width of each sample */ + unsigned int encoding; /* data encoding method */ + + /* + * The following values control audio device configuration + */ + unsigned int gain; /* gain level: 0 - 255 */ + unsigned int port; /* selected I/O port (see below) */ + unsigned int avail_ports; /* available I/O ports (see below) */ + unsigned int _xxx[2]; /* Reserved for future use */ + + unsigned int buffer_size; /* I/O buffer size */ + + /* + * The following values describe driver state + */ + unsigned int samples; /* number of samples converted */ + unsigned int eof; /* End Of File counter (play only) */ + + unsigned char pause; /* non-zero for pause, zero to resume */ + unsigned char error; /* non-zero if overflow/underflow */ + unsigned char waiting; /* non-zero if a process wants access */ + unsigned char balance; /* stereo channel balance */ + + unsigned short minordev; + + /* + * The following values are read-only state flags + */ + unsigned char open; /* non-zero if open access permitted */ + unsigned char active; /* non-zero if I/O is active */ +} audio_prinfo_t; + + +/* + * This structure describes the current state of the audio device. + */ +typedef struct audio_info { + /* + * Per-stream information + */ + audio_prinfo_t play; /* output status information */ + audio_prinfo_t record; /* input status information */ + + /* + * Per-unit/channel information + */ + unsigned int monitor_gain; /* input to output mix: 0 - 255 */ + unsigned char output_muted; /* non-zero if output is muted */ + unsigned char _xxx[3]; /* Reserved for future use */ + unsigned int _yyy[3]; /* Reserved for future use */ +} audio_info_t; + + +/* + * Audio encoding types + */ +#define AUDIO_ENCODING_NONE (0) /* no encoding assigned */ +#define AUDIO_ENCODING_ULAW (1) /* u-law encoding */ +#define AUDIO_ENCODING_ALAW (2) /* A-law encoding */ +#define AUDIO_ENCODING_LINEAR (3) /* Linear PCM encoding */ +#define AUDIO_ENCODING_FLOAT (4) /* IEEE float (-1. <-> +1.) */ +#define AUDIO_ENCODING_DVI (104) /* DVI ADPCM */ +#define AUDIO_ENCODING_LINEAR8 (105) /* 8 bit UNSIGNED */ +#define AUDIO_ENCODING_LINEARLE (106) /* Linear PCM LE encoding */ + +/* + * These ranges apply to record, play, and monitor gain values + */ +#define AUDIO_MIN_GAIN (0) /* minimum gain value */ +#define AUDIO_MAX_GAIN (255) /* maximum gain value */ + +/* + * These values apply to the balance field to adjust channel gain values + */ +#define AUDIO_LEFT_BALANCE (0) /* left channel only */ +#define AUDIO_MID_BALANCE (32) /* equal left/right channel */ +#define AUDIO_RIGHT_BALANCE (64) /* right channel only */ +#define AUDIO_BALANCE_SHIFT (3) + +/* + * Generic minimum/maximum limits for number of channels, both modes + */ +#define AUDIO_MIN_PLAY_CHANNELS (1) +#define AUDIO_MAX_PLAY_CHANNELS (4) +#define AUDIO_MIN_REC_CHANNELS (1) +#define AUDIO_MAX_REC_CHANNELS (4) + +/* + * Generic minimum/maximum limits for sample precision + */ +#define AUDIO_MIN_PLAY_PRECISION (8) +#define AUDIO_MAX_PLAY_PRECISION (32) +#define AUDIO_MIN_REC_PRECISION (8) +#define AUDIO_MAX_REC_PRECISION (32) + +/* + * Define some convenient names for typical audio ports + */ +/* + * output ports (several may be enabled simultaneously) + */ +#define AUDIO_SPEAKER 0x01 /* output to built-in speaker */ +#define AUDIO_HEADPHONE 0x02 /* output to headphone jack */ +#define AUDIO_LINE_OUT 0x04 /* output to line out */ + +/* + * input ports (usually only one at a time) + */ +#define AUDIO_MICROPHONE 0x01 /* input from microphone */ +#define AUDIO_LINE_IN 0x02 /* input from line in */ +#define AUDIO_CD 0x04 /* input from on-board CD inputs */ +#define AUDIO_INTERNAL_CD_IN AUDIO_CD /* input from internal CDROM */ +#define AUDIO_ANALOG_LOOPBACK 0x40 /* input from output */ + + +/* + * This macro initializes an audio_info structure to 'harmless' values. + * Note that (~0) might not be a harmless value for a flag that was + * a signed int. + */ +#define AUDIO_INITINFO(i) { \ + unsigned int *__x__; \ + for (__x__ = (unsigned int *)(i); \ + (char *) __x__ < (((char *)(i)) + sizeof (audio_info_t)); \ + *__x__++ = ~0); \ +} + +/* + * These allow testing for what the user wants to set + */ +#define AUD_INITVALUE (~0) +#define Modify(X) ((unsigned int)(X) != AUD_INITVALUE) +#define Modifys(X) ((X) != (unsigned short)AUD_INITVALUE) +#define Modifyc(X) ((X) != (unsigned char)AUD_INITVALUE) + +/* + * Parameter for the AUDIO_GETDEV ioctl to determine current + * audio devices. + */ +#define MAX_AUDIO_DEV_LEN (16) +typedef struct audio_device { + char name[MAX_AUDIO_DEV_LEN]; + char version[MAX_AUDIO_DEV_LEN]; + char config[MAX_AUDIO_DEV_LEN]; +} audio_device_t; + + +/* + * Ioctl calls for the audio device. + */ + +/* + * AUDIO_GETINFO retrieves the current state of the audio device. + * + * AUDIO_SETINFO copies all fields of the audio_info structure whose + * values are not set to the initialized value (-1) to the device state. + * It performs an implicit AUDIO_GETINFO to return the new state of the + * device. Note that the record.samples and play.samples fields are set + * to the last value before the AUDIO_SETINFO took effect. This allows + * an application to reset the counters while atomically retrieving the + * last value. + * + * AUDIO_DRAIN suspends the calling process until the write buffers are + * empty. + * + * AUDIO_GETDEV returns a structure of type audio_device_t which contains + * three strings. The string "name" is a short identifying string (for + * example, the SBus Fcode name string), the string "version" identifies + * the current version of the device, and the "config" string identifies + * the specific configuration of the audio stream. All fields are + * device-dependent -- see the device specific manual pages for details. + * + * AUDIO_GETDEV_SUNOS returns a number which is an audio device defined + * herein (making it not too portable) + * + * AUDIO_FLUSH stops all playback and recording, clears all queued buffers, + * resets error counters, and restarts recording and playback as appropriate + * for the current sampling mode. + */ +#define AUDIO_GETINFO _IOR('A', 1, audio_info_t) +#define AUDIO_SETINFO _IOWR('A', 2, audio_info_t) +#define AUDIO_DRAIN _IO('A', 3) +#define AUDIO_GETDEV _IOR('A', 4, audio_device_t) +#define AUDIO_GETDEV_SUNOS _IOR('A', 4, int) +#define AUDIO_FLUSH _IO('A', 5) + +/* Define possible audio hardware configurations for + * old SunOS-style AUDIO_GETDEV ioctl */ +#define AUDIO_DEV_UNKNOWN (0) /* not defined */ +#define AUDIO_DEV_AMD (1) /* audioamd device */ +#define AUDIO_DEV_SPEAKERBOX (2) /* dbri device with speakerbox */ +#define AUDIO_DEV_CODEC (3) /* dbri device (internal speaker) */ +#define AUDIO_DEV_CS4231 (5) /* cs4231 device */ + +/* + * The following ioctl sets the audio device into an internal loopback mode, + * if the hardware supports this. The argument is TRUE to set loopback, + * FALSE to reset to normal operation. If the hardware does not support + * internal loopback, the ioctl should fail with EINVAL. + * Causes ADC data to be digitally mixed in and sent to the DAC. + */ +#define AUDIO_DIAG_LOOPBACK _IOW('A', 101, int) + +#endif /* _AUDIOIO_H_ */ diff --git a/include/asm-sparc/auxio.h b/include/asm-sparc/auxio.h new file mode 100644 index 00000000000..ee83aefb20d --- /dev/null +++ b/include/asm-sparc/auxio.h @@ -0,0 +1,89 @@ +/* $Id: auxio.h,v 1.18 1997/11/07 15:01:45 jj Exp $ + * auxio.h: Definitions and code for the Auxiliary I/O register. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ +#ifndef _SPARC_AUXIO_H +#define _SPARC_AUXIO_H + +#include <asm/system.h> +#include <asm/vaddrs.h> + +/* This register is an unsigned char in IO space. It does two things. + * First, it is used to control the front panel LED light on machines + * that have it (good for testing entry points to trap handlers and irq's) + * Secondly, it controls various floppy drive parameters. + */ +#define AUXIO_ORMEIN 0xf0 /* All writes must set these bits. */ +#define AUXIO_ORMEIN4M 0xc0 /* sun4m - All writes must set these bits. */ +#define AUXIO_FLPY_DENS 0x20 /* Floppy density, high if set. Read only. */ +#define AUXIO_FLPY_DCHG 0x10 /* A disk change occurred. Read only. */ +#define AUXIO_EDGE_ON 0x10 /* sun4m - On means Jumper block is in. */ +#define AUXIO_FLPY_DSEL 0x08 /* Drive select/start-motor. Write only. */ +#define AUXIO_LINK_TEST 0x08 /* sun4m - On means TPE Carrier detect. */ + +/* Set the following to one, then zero, after doing a pseudo DMA transfer. */ +#define AUXIO_FLPY_TCNT 0x04 /* Floppy terminal count. Write only. */ + +/* Set the following to zero to eject the floppy. */ +#define AUXIO_FLPY_EJCT 0x02 /* Eject floppy disk. Write only. */ +#define AUXIO_LED 0x01 /* On if set, off if unset. Read/Write */ + +#ifndef __ASSEMBLY__ + +/* + * NOTE: these routines are implementation dependent-- + * understand the hardware you are querying! + */ +extern void set_auxio(unsigned char bits_on, unsigned char bits_off); +extern unsigned char get_auxio(void); /* .../asm-sparc/floppy.h */ + +/* + * The following routines are provided for driver-compatibility + * with sparc64 (primarily sunlance.c) + */ + +#define AUXIO_LTE_ON 1 +#define AUXIO_LTE_OFF 0 + +/* auxio_set_lte - Set Link Test Enable (TPE Link Detect) + * + * on - AUXIO_LTE_ON or AUXIO_LTE_OFF + */ +#define auxio_set_lte(on) \ +do { \ + if(on) { \ + set_auxio(AUXIO_LINK_TEST, 0); \ + } else { \ + set_auxio(0, AUXIO_LINK_TEST); \ + } \ +} while (0) + +#define AUXIO_LED_ON 1 +#define AUXIO_LED_OFF 0 + +/* auxio_set_led - Set system front panel LED + * + * on - AUXIO_LED_ON or AUXIO_LED_OFF + */ +#define auxio_set_led(on) \ +do { \ + if(on) { \ + set_auxio(AUXIO_LED, 0); \ + } else { \ + set_auxio(0, AUXIO_LED); \ + } \ +} while (0) + +#endif /* !(__ASSEMBLY__) */ + + +/* AUXIO2 (Power Off Control) */ +extern __volatile__ unsigned char * auxio_power_register; + +#define AUXIO_POWER_DETECT_FAILURE 32 +#define AUXIO_POWER_CLEAR_FAILURE 2 +#define AUXIO_POWER_OFF 1 + + +#endif /* !(_SPARC_AUXIO_H) */ diff --git a/include/asm-sparc/bitext.h b/include/asm-sparc/bitext.h new file mode 100644 index 00000000000..297b2f2fcb4 --- /dev/null +++ b/include/asm-sparc/bitext.h @@ -0,0 +1,27 @@ +/* + * bitext.h: Bit string operations on the sparc, specific to architecture. + * + * Copyright 2002 Pete Zaitcev <zaitcev@yahoo.com> + */ + +#ifndef _SPARC_BITEXT_H +#define _SPARC_BITEXT_H + +#include <linux/spinlock.h> + +struct bit_map { + spinlock_t lock; + unsigned long *map; + int size; + int used; + int last_off; + int last_size; + int first_free; + int num_colors; +}; + +extern int bit_map_string_get(struct bit_map *t, int len, int align); +extern void bit_map_clear(struct bit_map *t, int offset, int len); +extern void bit_map_init(struct bit_map *t, unsigned long *map, int size); + +#endif /* defined(_SPARC_BITEXT_H) */ diff --git a/include/asm-sparc/bitops.h b/include/asm-sparc/bitops.h new file mode 100644 index 00000000000..bfbd795a0a8 --- /dev/null +++ b/include/asm-sparc/bitops.h @@ -0,0 +1,537 @@ +/* $Id: bitops.h,v 1.67 2001/11/19 18:36:34 davem Exp $ + * bitops.h: Bit string operations on the Sparc. + * + * Copyright 1995 David S. Miller (davem@caip.rutgers.edu) + * Copyright 1996 Eddie C. Dost (ecd@skynet.be) + * Copyright 2001 Anton Blanchard (anton@samba.org) + */ + +#ifndef _SPARC_BITOPS_H +#define _SPARC_BITOPS_H + +#include <linux/compiler.h> +#include <asm/byteorder.h> + +#ifdef __KERNEL__ + +/* + * Set bit 'nr' in 32-bit quantity at address 'addr' where bit '0' + * is in the highest of the four bytes and bit '31' is the high bit + * within the first byte. Sparc is BIG-Endian. Unless noted otherwise + * all bit-ops return 0 if bit was previously clear and != 0 otherwise. + */ +static inline int test_and_set_bit(unsigned long nr, volatile unsigned long *addr) +{ + register unsigned long mask asm("g2"); + register unsigned long *ADDR asm("g1"); + register int tmp1 asm("g3"); + register int tmp2 asm("g4"); + register int tmp3 asm("g5"); + register int tmp4 asm("g7"); + + ADDR = ((unsigned long *) addr) + (nr >> 5); + mask = 1 << (nr & 31); + + __asm__ __volatile__( + "mov %%o7, %%g4\n\t" + "call ___set_bit\n\t" + " add %%o7, 8, %%o7\n" + : "=&r" (mask), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3), "=r" (tmp4) + : "0" (mask), "r" (ADDR) + : "memory", "cc"); + + return mask != 0; +} + +static inline void set_bit(unsigned long nr, volatile unsigned long *addr) +{ + register unsigned long mask asm("g2"); + register unsigned long *ADDR asm("g1"); + register int tmp1 asm("g3"); + register int tmp2 asm("g4"); + register int tmp3 asm("g5"); + register int tmp4 asm("g7"); + + ADDR = ((unsigned long *) addr) + (nr >> 5); + mask = 1 << (nr & 31); + + __asm__ __volatile__( + "mov %%o7, %%g4\n\t" + "call ___set_bit\n\t" + " add %%o7, 8, %%o7\n" + : "=&r" (mask), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3), "=r" (tmp4) + : "0" (mask), "r" (ADDR) + : "memory", "cc"); +} + +static inline int test_and_clear_bit(unsigned long nr, volatile unsigned long *addr) +{ + register unsigned long mask asm("g2"); + register unsigned long *ADDR asm("g1"); + register int tmp1 asm("g3"); + register int tmp2 asm("g4"); + register int tmp3 asm("g5"); + register int tmp4 asm("g7"); + + ADDR = ((unsigned long *) addr) + (nr >> 5); + mask = 1 << (nr & 31); + + __asm__ __volatile__( + "mov %%o7, %%g4\n\t" + "call ___clear_bit\n\t" + " add %%o7, 8, %%o7\n" + : "=&r" (mask), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3), "=r" (tmp4) + : "0" (mask), "r" (ADDR) + : "memory", "cc"); + + return mask != 0; +} + +static inline void clear_bit(unsigned long nr, volatile unsigned long *addr) +{ + register unsigned long mask asm("g2"); + register unsigned long *ADDR asm("g1"); + register int tmp1 asm("g3"); + register int tmp2 asm("g4"); + register int tmp3 asm("g5"); + register int tmp4 asm("g7"); + + ADDR = ((unsigned long *) addr) + (nr >> 5); + mask = 1 << (nr & 31); + + __asm__ __volatile__( + "mov %%o7, %%g4\n\t" + "call ___clear_bit\n\t" + " add %%o7, 8, %%o7\n" + : "=&r" (mask), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3), "=r" (tmp4) + : "0" (mask), "r" (ADDR) + : "memory", "cc"); +} + +static inline int test_and_change_bit(unsigned long nr, volatile unsigned long *addr) +{ + register unsigned long mask asm("g2"); + register unsigned long *ADDR asm("g1"); + register int tmp1 asm("g3"); + register int tmp2 asm("g4"); + register int tmp3 asm("g5"); + register int tmp4 asm("g7"); + + ADDR = ((unsigned long *) addr) + (nr >> 5); + mask = 1 << (nr & 31); + + __asm__ __volatile__( + "mov %%o7, %%g4\n\t" + "call ___change_bit\n\t" + " add %%o7, 8, %%o7\n" + : "=&r" (mask), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3), "=r" (tmp4) + : "0" (mask), "r" (ADDR) + : "memory", "cc"); + + return mask != 0; +} + +static inline void change_bit(unsigned long nr, volatile unsigned long *addr) +{ + register unsigned long mask asm("g2"); + register unsigned long *ADDR asm("g1"); + register int tmp1 asm("g3"); + register int tmp2 asm("g4"); + register int tmp3 asm("g5"); + register int tmp4 asm("g7"); + + ADDR = ((unsigned long *) addr) + (nr >> 5); + mask = 1 << (nr & 31); + + __asm__ __volatile__( + "mov %%o7, %%g4\n\t" + "call ___change_bit\n\t" + " add %%o7, 8, %%o7\n" + : "=&r" (mask), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3), "=r" (tmp4) + : "0" (mask), "r" (ADDR) + : "memory", "cc"); +} + +/* + * non-atomic versions + */ +static inline void __set_bit(int nr, volatile unsigned long *addr) +{ + unsigned long mask = 1UL << (nr & 0x1f); + unsigned long *p = ((unsigned long *)addr) + (nr >> 5); + + *p |= mask; +} + +static inline void __clear_bit(int nr, volatile unsigned long *addr) +{ + unsigned long mask = 1UL << (nr & 0x1f); + unsigned long *p = ((unsigned long *)addr) + (nr >> 5); + + *p &= ~mask; +} + +static inline void __change_bit(int nr, volatile unsigned long *addr) +{ + unsigned long mask = 1UL << (nr & 0x1f); + unsigned long *p = ((unsigned long *)addr) + (nr >> 5); + + *p ^= mask; +} + +static inline int __test_and_set_bit(int nr, volatile unsigned long *addr) +{ + unsigned long mask = 1UL << (nr & 0x1f); + unsigned long *p = ((unsigned long *)addr) + (nr >> 5); + unsigned long old = *p; + + *p = old | mask; + return (old & mask) != 0; +} + +static inline int __test_and_clear_bit(int nr, volatile unsigned long *addr) +{ + unsigned long mask = 1UL << (nr & 0x1f); + unsigned long *p = ((unsigned long *)addr) + (nr >> 5); + unsigned long old = *p; + + *p = old & ~mask; + return (old & mask) != 0; +} + +static inline int __test_and_change_bit(int nr, volatile unsigned long *addr) +{ + unsigned long mask = 1UL << (nr & 0x1f); + unsigned long *p = ((unsigned long *)addr) + (nr >> 5); + unsigned long old = *p; + + *p = old ^ mask; + return (old & mask) != 0; +} + +#define smp_mb__before_clear_bit() do { } while(0) +#define smp_mb__after_clear_bit() do { } while(0) + +/* The following routine need not be atomic. */ +static inline int test_bit(int nr, __const__ volatile unsigned long *addr) +{ + return (1UL & (((unsigned long *)addr)[nr >> 5] >> (nr & 31))) != 0UL; +} + +/* The easy/cheese version for now. */ +static inline unsigned long ffz(unsigned long word) +{ + unsigned long result = 0; + + while(word & 1) { + result++; + word >>= 1; + } + return result; +} + +/** + * __ffs - find first bit in word. + * @word: The word to search + * + * Undefined if no bit exists, so code should check against 0 first. + */ +static inline int __ffs(unsigned long word) +{ + int num = 0; + + if ((word & 0xffff) == 0) { + num += 16; + word >>= 16; + } + if ((word & 0xff) == 0) { + num += 8; + word >>= 8; + } + if ((word & 0xf) == 0) { + num += 4; + word >>= 4; + } + if ((word & 0x3) == 0) { + num += 2; + word >>= 2; + } + if ((word & 0x1) == 0) + num += 1; + return num; +} + +/* + * Every architecture must define this function. It's the fastest + * way of searching a 140-bit bitmap where the first 100 bits are + * unlikely to be set. It's guaranteed that at least one of the 140 + * bits is cleared. + */ +static inline int sched_find_first_bit(unsigned long *b) +{ + + if (unlikely(b[0])) + return __ffs(b[0]); + if (unlikely(b[1])) + return __ffs(b[1]) + 32; + if (unlikely(b[2])) + return __ffs(b[2]) + 64; + if (b[3]) + return __ffs(b[3]) + 96; + return __ffs(b[4]) + 128; +} + +/* + * ffs: find first bit set. This is defined the same way as + * the libc and compiler builtin ffs routines, therefore + * differs in spirit from the above ffz (man ffs). + */ +static inline int ffs(int x) +{ + if (!x) + return 0; + return __ffs((unsigned long)x) + 1; +} + +/* + * fls: find last (most-significant) bit set. + * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32. + */ +#define fls(x) generic_fls(x) + +/* + * hweightN: returns the hamming weight (i.e. the number + * of bits set) of a N-bit word + */ +#define hweight32(x) generic_hweight32(x) +#define hweight16(x) generic_hweight16(x) +#define hweight8(x) generic_hweight8(x) + +/* + * find_next_zero_bit() finds the first zero bit in a bit string of length + * 'size' bits, starting the search at bit 'offset'. This is largely based + * on Linus's ALPHA routines, which are pretty portable BTW. + */ +static inline unsigned long find_next_zero_bit(const unsigned long *addr, + unsigned long size, unsigned long offset) +{ + const unsigned long *p = addr + (offset >> 5); + unsigned long result = offset & ~31UL; + unsigned long tmp; + + if (offset >= size) + return size; + size -= result; + offset &= 31UL; + if (offset) { + tmp = *(p++); + tmp |= ~0UL >> (32-offset); + if (size < 32) + goto found_first; + if (~tmp) + goto found_middle; + size -= 32; + result += 32; + } + while (size & ~31UL) { + if (~(tmp = *(p++))) + goto found_middle; + result += 32; + size -= 32; + } + if (!size) + return result; + tmp = *p; + +found_first: + tmp |= ~0UL << size; + if (tmp == ~0UL) /* Are any bits zero? */ + return result + size; /* Nope. */ +found_middle: + return result + ffz(tmp); +} + +/* + * Linus sez that gcc can optimize the following correctly, we'll see if this + * holds on the Sparc as it does for the ALPHA. + */ +#define find_first_zero_bit(addr, size) \ + find_next_zero_bit((addr), (size), 0) + +/** + * find_next_bit - find the first set bit in a memory region + * @addr: The address to base the search on + * @offset: The bitnumber to start searching at + * @size: The maximum size to search + * + * Scheduler induced bitop, do not use. + */ +static inline int find_next_bit(const unsigned long *addr, int size, int offset) +{ + const unsigned long *p = addr + (offset >> 5); + int num = offset & ~0x1f; + unsigned long word; + + word = *p++; + word &= ~((1 << (offset & 0x1f)) - 1); + while (num < size) { + if (word != 0) { + return __ffs(word) + num; + } + word = *p++; + num += 0x20; + } + return num; +} + +/** + * find_first_bit - find the first set bit in a memory region + * @addr: The address to start the search at + * @size: The maximum size to search + * + * Returns the bit-number of the first set bit, not the number of the byte + * containing a bit. + */ +#define find_first_bit(addr, size) \ + find_next_bit((addr), (size), 0) + +/* + */ +static inline int test_le_bit(int nr, __const__ unsigned long * addr) +{ + __const__ unsigned char *ADDR = (__const__ unsigned char *) addr; + return (ADDR[nr >> 3] >> (nr & 7)) & 1; +} + +/* + * non-atomic versions + */ +static inline void __set_le_bit(int nr, unsigned long *addr) +{ + unsigned char *ADDR = (unsigned char *)addr; + + ADDR += nr >> 3; + *ADDR |= 1 << (nr & 0x07); +} + +static inline void __clear_le_bit(int nr, unsigned long *addr) +{ + unsigned char *ADDR = (unsigned char *)addr; + + ADDR += nr >> 3; + *ADDR &= ~(1 << (nr & 0x07)); +} + +static inline int __test_and_set_le_bit(int nr, unsigned long *addr) +{ + int mask, retval; + unsigned char *ADDR = (unsigned char *)addr; + + ADDR += nr >> 3; + mask = 1 << (nr & 0x07); + retval = (mask & *ADDR) != 0; + *ADDR |= mask; + return retval; +} + +static inline int __test_and_clear_le_bit(int nr, unsigned long *addr) +{ + int mask, retval; + unsigned char *ADDR = (unsigned char *)addr; + + ADDR += nr >> 3; + mask = 1 << (nr & 0x07); + retval = (mask & *ADDR) != 0; + *ADDR &= ~mask; + return retval; +} + +static inline unsigned long find_next_zero_le_bit(const unsigned long *addr, + unsigned long size, unsigned long offset) +{ + const unsigned long *p = addr + (offset >> 5); + unsigned long result = offset & ~31UL; + unsigned long tmp; + + if (offset >= size) + return size; + size -= result; + offset &= 31UL; + if(offset) { + tmp = *(p++); + tmp |= __swab32(~0UL >> (32-offset)); + if(size < 32) + goto found_first; + if(~tmp) + goto found_middle; + size -= 32; + result += 32; + } + while(size & ~31UL) { + if(~(tmp = *(p++))) + goto found_middle; + result += 32; + size -= 32; + } + if(!size) + return result; + tmp = *p; + +found_first: + tmp = __swab32(tmp) | (~0UL << size); + if (tmp == ~0UL) /* Are any bits zero? */ + return result + size; /* Nope. */ + return result + ffz(tmp); + +found_middle: + return result + ffz(__swab32(tmp)); +} + +#define find_first_zero_le_bit(addr, size) \ + find_next_zero_le_bit((addr), (size), 0) + +#define ext2_set_bit(nr,addr) \ + __test_and_set_le_bit((nr),(unsigned long *)(addr)) +#define ext2_clear_bit(nr,addr) \ + __test_and_clear_le_bit((nr),(unsigned long *)(addr)) + +#define ext2_set_bit_atomic(lock, nr, addr) \ + ({ \ + int ret; \ + spin_lock(lock); \ + ret = ext2_set_bit((nr), (unsigned long *)(addr)); \ + spin_unlock(lock); \ + ret; \ + }) + +#define ext2_clear_bit_atomic(lock, nr, addr) \ + ({ \ + int ret; \ + spin_lock(lock); \ + ret = ext2_clear_bit((nr), (unsigned long *)(addr)); \ + spin_unlock(lock); \ + ret; \ + }) + +#define ext2_test_bit(nr,addr) \ + test_le_bit((nr),(unsigned long *)(addr)) +#define ext2_find_first_zero_bit(addr, size) \ + find_first_zero_le_bit((unsigned long *)(addr), (size)) +#define ext2_find_next_zero_bit(addr, size, off) \ + find_next_zero_le_bit((unsigned long *)(addr), (size), (off)) + +/* Bitmap functions for the minix filesystem. */ +#define minix_test_and_set_bit(nr,addr) \ + test_and_set_bit((nr),(unsigned long *)(addr)) +#define minix_set_bit(nr,addr) \ + set_bit((nr),(unsigned long *)(addr)) +#define minix_test_and_clear_bit(nr,addr) \ + test_and_clear_bit((nr),(unsigned long *)(addr)) +#define minix_test_bit(nr,addr) \ + test_bit((nr),(unsigned long *)(addr)) +#define minix_find_first_zero_bit(addr,size) \ + find_first_zero_bit((unsigned long *)(addr),(size)) + +#endif /* __KERNEL__ */ + +#endif /* defined(_SPARC_BITOPS_H) */ diff --git a/include/asm-sparc/bpp.h b/include/asm-sparc/bpp.h new file mode 100644 index 00000000000..3578ac113cf --- /dev/null +++ b/include/asm-sparc/bpp.h @@ -0,0 +1,73 @@ +#ifndef _SPARC_BPP_H +#define _SPARC_BPP_H + +/* + * Copyright (c) 1995 Picture Elements + * Stephen Williams + * Gus Baldauf + * + * Linux/SPARC port by Peter Zaitcev. + * Integration into SPARC tree by Tom Dyas. + */ + +#include <linux/ioctl.h> + +/* + * This is a driver that supports IEEE Std 1284-1994 communications + * with compliant or compatible devices. It will use whatever features + * the device supports, prefering those that are typically faster. + * + * When the device is opened, it is left in COMPATABILITY mode, and + * writes work like any printer device. The driver only attempt to + * negotiate 1284 modes when needed so that plugs can be pulled, + * switch boxes switched, etc., without disrupting things. It will + * also leave the device in compatibility mode when closed. + */ + + + +/* + * This driver also supplies ioctls to manually manipulate the + * pins. This is great for testing devices, or writing code to deal + * with bizzarro-mode of the ACME Special TurboThingy Plus. + * + * NOTE: These ioctl currently do not interact well with + * read/write. Caveat emptor. + * + * PUT_PINS allows us to assign the sense of all the pins, including + * the data pins if being driven by the host. The GET_PINS returns the + * pins that the peripheral drives, including data if appropriate. + */ + +# define BPP_PUT_PINS _IOW('B', 1, int) +# define BPP_GET_PINS _IOR('B', 2, char) /* that's bogus - should've been _IO */ +# define BPP_PUT_DATA _IOW('B', 3, int) +# define BPP_GET_DATA _IOR('B', 4, char) /* ditto */ + +/* + * Set the data bus to input mode. Disengage the data bin driver and + * be prepared to read values from the peripheral. If the arg is 0, + * then revert the bus to output mode. + */ +# define BPP_SET_INPUT _IOW('B', 5, int) + +/* + * These bits apply to the PUT operation... + */ +# define BPP_PP_nStrobe 0x0001 +# define BPP_PP_nAutoFd 0x0002 +# define BPP_PP_nInit 0x0004 +# define BPP_PP_nSelectIn 0x0008 + +/* + * These apply to the GET operation, which also reads the current value + * of the previously put values. A bit mask of these will be returned + * as a bit mask in the return code of the ioctl(). + */ +# define BPP_GP_nAck 0x0100 +# define BPP_GP_Busy 0x0200 +# define BPP_GP_PError 0x0400 +# define BPP_GP_Select 0x0800 +# define BPP_GP_nFault 0x1000 + +#endif diff --git a/include/asm-sparc/bsderrno.h b/include/asm-sparc/bsderrno.h new file mode 100644 index 00000000000..54a75be43ab --- /dev/null +++ b/include/asm-sparc/bsderrno.h @@ -0,0 +1,94 @@ +/* $Id: bsderrno.h,v 1.3 1996/04/25 06:12:47 davem Exp $ + * bsderrno.h: Error numbers for NetBSD binary compatibility + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef _SPARC_BSDERRNO_H +#define _SPARC_BSDERRNO_H + +#define BSD_EPERM 1 /* Operation not permitted */ +#define BSD_ENOENT 2 /* No such file or directory */ +#define BSD_ESRCH 3 /* No such process */ +#define BSD_EINTR 4 /* Interrupted system call */ +#define BSD_EIO 5 /* Input/output error */ +#define BSD_ENXIO 6 /* Device not configured */ +#define BSD_E2BIG 7 /* Argument list too long */ +#define BSD_ENOEXEC 8 /* Exec format error */ +#define BSD_EBADF 9 /* Bad file descriptor */ +#define BSD_ECHILD 10 /* No child processes */ +#define BSD_EDEADLK 11 /* Resource deadlock avoided */ +#define BSD_ENOMEM 12 /* Cannot allocate memory */ +#define BSD_EACCES 13 /* Permission denied */ +#define BSD_EFAULT 14 /* Bad address */ +#define BSD_ENOTBLK 15 /* Block device required */ +#define BSD_EBUSY 16 /* Device busy */ +#define BSD_EEXIST 17 /* File exists */ +#define BSD_EXDEV 18 /* Cross-device link */ +#define BSD_ENODEV 19 /* Operation not supported by device */ +#define BSD_ENOTDIR 20 /* Not a directory */ +#define BSD_EISDIR 21 /* Is a directory */ +#define BSD_EINVAL 22 /* Invalid argument */ +#define BSD_ENFILE 23 /* Too many open files in system */ +#define BSD_EMFILE 24 /* Too many open files */ +#define BSD_ENOTTY 25 /* Inappropriate ioctl for device */ +#define BSD_ETXTBSY 26 /* Text file busy */ +#define BSD_EFBIG 27 /* File too large */ +#define BSD_ENOSPC 28 /* No space left on device */ +#define BSD_ESPIPE 29 /* Illegal seek */ +#define BSD_EROFS 30 /* Read-only file system */ +#define BSD_EMLINK 31 /* Too many links */ +#define BSD_EPIPE 32 /* Broken pipe */ +#define BSD_EDOM 33 /* Numerical argument out of domain */ +#define BSD_ERANGE 34 /* Result too large */ +#define BSD_EAGAIN 35 /* Resource temporarily unavailable */ +#define BSD_EWOULDBLOCK EAGAIN /* Operation would block */ +#define BSD_EINPROGRESS 36 /* Operation now in progress */ +#define BSD_EALREADY 37 /* Operation already in progress */ +#define BSD_ENOTSOCK 38 /* Socket operation on non-socket */ +#define BSD_EDESTADDRREQ 39 /* Destination address required */ +#define BSD_EMSGSIZE 40 /* Message too long */ +#define BSD_EPROTOTYPE 41 /* Protocol wrong type for socket */ +#define BSD_ENOPROTOOPT 42 /* Protocol not available */ +#define BSD_EPROTONOSUPPORT 43 /* Protocol not supported */ +#define BSD_ESOCKTNOSUPPORT 44 /* Socket type not supported */ +#define BSD_EOPNOTSUPP 45 /* Operation not supported */ +#define BSD_EPFNOSUPPORT 46 /* Protocol family not supported */ +#define BSD_EAFNOSUPPORT 47 /* Address family not supported by protocol family */ +#define BSD_EADDRINUSE 48 /* Address already in use */ +#define BSD_EADDRNOTAVAIL 49 /* Can't assign requested address */ +#define BSD_ENETDOWN 50 /* Network is down */ +#define BSD_ENETUNREACH 51 /* Network is unreachable */ +#define BSD_ENETRESET 52 /* Network dropped connection on reset */ +#define BSD_ECONNABORTED 53 /* Software caused connection abort */ +#define BSD_ECONNRESET 54 /* Connection reset by peer */ +#define BSD_ENOBUFS 55 /* No buffer space available */ +#define BSD_EISCONN 56 /* Socket is already connected */ +#define BSD_ENOTCONN 57 /* Socket is not connected */ +#define BSD_ESHUTDOWN 58 /* Can't send after socket shutdown */ +#define BSD_ETOOMANYREFS 59 /* Too many references: can't splice */ +#define BSD_ETIMEDOUT 60 /* Operation timed out */ +#define BSD_ECONNREFUSED 61 /* Connection refused */ +#define BSD_ELOOP 62 /* Too many levels of symbolic links */ +#define BSD_ENAMETOOLONG 63 /* File name too long */ +#define BSD_EHOSTDOWN 64 /* Host is down */ +#define BSD_EHOSTUNREACH 65 /* No route to host */ +#define BSD_ENOTEMPTY 66 /* Directory not empty */ +#define BSD_EPROCLIM 67 /* Too many processes */ +#define BSD_EUSERS 68 /* Too many users */ +#define BSD_EDQUOT 69 /* Disc quota exceeded */ +#define BSD_ESTALE 70 /* Stale NFS file handle */ +#define BSD_EREMOTE 71 /* Too many levels of remote in path */ +#define BSD_EBADRPC 72 /* RPC struct is bad */ +#define BSD_ERPCMISMATCH 73 /* RPC version wrong */ +#define BSD_EPROGUNAVAIL 74 /* RPC prog. not avail */ +#define BSD_EPROGMISMATCH 75 /* Program version wrong */ +#define BSD_EPROCUNAVAIL 76 /* Bad procedure for program */ +#define BSD_ENOLCK 77 /* No locks available */ +#define BSD_ENOSYS 78 /* Function not implemented */ +#define BSD_EFTYPE 79 /* Inappropriate file type or format */ +#define BSD_EAUTH 80 /* Authentication error */ +#define BSD_ENEEDAUTH 81 /* Need authenticator */ +#define BSD_ELAST 81 /* Must be equal largest errno */ + +#endif /* !(_SPARC_BSDERRNO_H) */ diff --git a/include/asm-sparc/btfixup.h b/include/asm-sparc/btfixup.h new file mode 100644 index 00000000000..b84c96c8958 --- /dev/null +++ b/include/asm-sparc/btfixup.h @@ -0,0 +1,208 @@ +/* $Id: btfixup.h,v 1.4 1998/03/09 14:04:43 jj Exp $ + * asm-sparc/btfixup.h: Macros for boot time linking. + * + * Copyright (C) 1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz) + */ + +#ifndef _SPARC_BTFIXUP_H +#define _SPARC_BTFIXUP_H + +#include <linux/init.h> + +#ifndef __ASSEMBLY__ + +#ifdef MODULE +extern unsigned int ___illegal_use_of_BTFIXUP_SIMM13_in_module(void); +extern unsigned int ___illegal_use_of_BTFIXUP_SETHI_in_module(void); +extern unsigned int ___illegal_use_of_BTFIXUP_HALF_in_module(void); +extern unsigned int ___illegal_use_of_BTFIXUP_INT_in_module(void); + +#define BTFIXUP_SIMM13(__name) ___illegal_use_of_BTFIXUP_SIMM13_in_module() +#define BTFIXUP_HALF(__name) ___illegal_use_of_BTFIXUP_HALF_in_module() +#define BTFIXUP_SETHI(__name) ___illegal_use_of_BTFIXUP_SETHI_in_module() +#define BTFIXUP_INT(__name) ___illegal_use_of_BTFIXUP_INT_in_module() +#define BTFIXUP_BLACKBOX(__name) ___illegal_use_of_BTFIXUP_BLACKBOX_in_module + +#else + +#define BTFIXUP_SIMM13(__name) ___sf_##__name() +#define BTFIXUP_HALF(__name) ___af_##__name() +#define BTFIXUP_SETHI(__name) ___hf_##__name() +#define BTFIXUP_INT(__name) ((unsigned int)&___i_##__name) +/* This must be written in assembly and present in a sethi */ +#define BTFIXUP_BLACKBOX(__name) ___b_##__name +#endif /* MODULE */ + +/* Fixup call xx */ + +#define BTFIXUPDEF_CALL(__type, __name, __args...) \ + extern __type ___f_##__name(__args); \ + extern unsigned ___fs_##__name[3]; +#define BTFIXUPDEF_CALL_CONST(__type, __name, __args...) \ + extern __type ___f_##__name(__args) __attribute_const__; \ + extern unsigned ___fs_##__name[3]; +#define BTFIXUP_CALL(__name) ___f_##__name + +#define BTFIXUPDEF_BLACKBOX(__name) \ + extern unsigned ___bs_##__name[2]; + +/* Put bottom 13bits into some register variable */ + +#define BTFIXUPDEF_SIMM13(__name) \ + extern unsigned int ___sf_##__name(void) __attribute_const__; \ + extern unsigned ___ss_##__name[2]; \ + extern __inline__ unsigned int ___sf_##__name(void) { \ + unsigned int ret; \ + __asm__ ("or %%g0, ___s_" #__name ", %0" : "=r"(ret)); \ + return ret; \ + } +#define BTFIXUPDEF_SIMM13_INIT(__name,__val) \ + extern unsigned int ___sf_##__name(void) __attribute_const__; \ + extern unsigned ___ss_##__name[2]; \ + extern __inline__ unsigned int ___sf_##__name(void) { \ + unsigned int ret; \ + __asm__ ("or %%g0, ___s_" #__name "__btset_" #__val ", %0" : "=r"(ret));\ + return ret; \ + } + +/* Put either bottom 13 bits, or upper 22 bits into some register variable + * (depending on the value, this will lead into sethi FIX, reg; or + * mov FIX, reg; ) + */ + +#define BTFIXUPDEF_HALF(__name) \ + extern unsigned int ___af_##__name(void) __attribute_const__; \ + extern unsigned ___as_##__name[2]; \ + extern __inline__ unsigned int ___af_##__name(void) { \ + unsigned int ret; \ + __asm__ ("or %%g0, ___a_" #__name ", %0" : "=r"(ret)); \ + return ret; \ + } +#define BTFIXUPDEF_HALF_INIT(__name,__val) \ + extern unsigned int ___af_##__name(void) __attribute_const__; \ + extern unsigned ___as_##__name[2]; \ + extern __inline__ unsigned int ___af_##__name(void) { \ + unsigned int ret; \ + __asm__ ("or %%g0, ___a_" #__name "__btset_" #__val ", %0" : "=r"(ret));\ + return ret; \ + } + +/* Put upper 22 bits into some register variable */ + +#define BTFIXUPDEF_SETHI(__name) \ + extern unsigned int ___hf_##__name(void) __attribute_const__; \ + extern unsigned ___hs_##__name[2]; \ + extern __inline__ unsigned int ___hf_##__name(void) { \ + unsigned int ret; \ + __asm__ ("sethi %%hi(___h_" #__name "), %0" : "=r"(ret)); \ + return ret; \ + } +#define BTFIXUPDEF_SETHI_INIT(__name,__val) \ + extern unsigned int ___hf_##__name(void) __attribute_const__; \ + extern unsigned ___hs_##__name[2]; \ + extern __inline__ unsigned int ___hf_##__name(void) { \ + unsigned int ret; \ + __asm__ ("sethi %%hi(___h_" #__name "__btset_" #__val "), %0" : \ + "=r"(ret)); \ + return ret; \ + } + +/* Put a full 32bit integer into some register variable */ + +#define BTFIXUPDEF_INT(__name) \ + extern unsigned char ___i_##__name; \ + extern unsigned ___is_##__name[2]; + +#define BTFIXUPCALL_NORM 0x00000000 /* Always call */ +#define BTFIXUPCALL_NOP 0x01000000 /* Possibly optimize to nop */ +#define BTFIXUPCALL_RETINT(i) (0x90102000|((i) & 0x1fff)) /* Possibly optimize to mov i, %o0 */ +#define BTFIXUPCALL_ORINT(i) (0x90122000|((i) & 0x1fff)) /* Possibly optimize to or %o0, i, %o0 */ +#define BTFIXUPCALL_RETO0 0x01000000 /* Return first parameter, actually a nop */ +#define BTFIXUPCALL_ANDNINT(i) (0x902a2000|((i) & 0x1fff)) /* Possibly optimize to andn %o0, i, %o0 */ +#define BTFIXUPCALL_SWAPO0O1 0xd27a0000 /* Possibly optimize to swap [%o0],%o1 */ +#define BTFIXUPCALL_SWAPO0G0 0xc07a0000 /* Possibly optimize to swap [%o0],%g0 */ +#define BTFIXUPCALL_SWAPG1G2 0xc4784000 /* Possibly optimize to swap [%g1],%g2 */ +#define BTFIXUPCALL_STG0O0 0xc0220000 /* Possibly optimize to st %g0,[%o0] */ +#define BTFIXUPCALL_STO1O0 0xd2220000 /* Possibly optimize to st %o1,[%o0] */ + +#define BTFIXUPSET_CALL(__name, __addr, __insn) \ + do { \ + ___fs_##__name[0] |= 1; \ + ___fs_##__name[1] = (unsigned long)__addr; \ + ___fs_##__name[2] = __insn; \ + } while (0) + +#define BTFIXUPSET_BLACKBOX(__name, __func) \ + do { \ + ___bs_##__name[0] |= 1; \ + ___bs_##__name[1] = (unsigned long)__func; \ + } while (0) + +#define BTFIXUPCOPY_CALL(__name, __from) \ + do { \ + ___fs_##__name[0] |= 1; \ + ___fs_##__name[1] = ___fs_##__from[1]; \ + ___fs_##__name[2] = ___fs_##__from[2]; \ + } while (0) + +#define BTFIXUPSET_SIMM13(__name, __val) \ + do { \ + ___ss_##__name[0] |= 1; \ + ___ss_##__name[1] = (unsigned)__val; \ + } while (0) + +#define BTFIXUPCOPY_SIMM13(__name, __from) \ + do { \ + ___ss_##__name[0] |= 1; \ + ___ss_##__name[1] = ___ss_##__from[1]; \ + } while (0) + +#define BTFIXUPSET_HALF(__name, __val) \ + do { \ + ___as_##__name[0] |= 1; \ + ___as_##__name[1] = (unsigned)__val; \ + } while (0) + +#define BTFIXUPCOPY_HALF(__name, __from) \ + do { \ + ___as_##__name[0] |= 1; \ + ___as_##__name[1] = ___as_##__from[1]; \ + } while (0) + +#define BTFIXUPSET_SETHI(__name, __val) \ + do { \ + ___hs_##__name[0] |= 1; \ + ___hs_##__name[1] = (unsigned)__val; \ + } while (0) + +#define BTFIXUPCOPY_SETHI(__name, __from) \ + do { \ + ___hs_##__name[0] |= 1; \ + ___hs_##__name[1] = ___hs_##__from[1]; \ + } while (0) + +#define BTFIXUPSET_INT(__name, __val) \ + do { \ + ___is_##__name[0] |= 1; \ + ___is_##__name[1] = (unsigned)__val; \ + } while (0) + +#define BTFIXUPCOPY_INT(__name, __from) \ + do { \ + ___is_##__name[0] |= 1; \ + ___is_##__name[1] = ___is_##__from[1]; \ + } while (0) + +#define BTFIXUPVAL_CALL(__name) \ + ((unsigned long)___fs_##__name[1]) + +extern void btfixup(void); + +#else /* __ASSEMBLY__ */ + +#define BTFIXUP_SETHI(__name) %hi(___h_ ## __name) +#define BTFIXUP_SETHI_INIT(__name,__val) %hi(___h_ ## __name ## __btset_ ## __val) + +#endif /* __ASSEMBLY__ */ + +#endif /* !(_SPARC_BTFIXUP_H) */ diff --git a/include/asm-sparc/bug.h b/include/asm-sparc/bug.h new file mode 100644 index 00000000000..0d30a67d87a --- /dev/null +++ b/include/asm-sparc/bug.h @@ -0,0 +1,31 @@ +#ifndef _SPARC_BUG_H +#define _SPARC_BUG_H + +/* Only use the inline asm until a gcc release that can handle __builtin_trap + * -rob 2003-06-25 + * + * gcc-3.3.1 and later will be OK -DaveM + */ +#if (__GNUC__ > 3) || \ + (__GNUC__ == 3 && __GNUC_MINOR__ > 3) || \ + (__GNUC__ == 3 && __GNUC_MINOR__ == 3 && __GNUC_PATCHLEVEL__ >= 4) +#define __bug_trap() __builtin_trap() +#else +#define __bug_trap() \ + __asm__ __volatile__ ("t 0x5\n\t" : : ) +#endif + +#ifdef CONFIG_DEBUG_BUGVERBOSE +extern void do_BUG(const char *file, int line); +#define BUG() do { \ + do_BUG(__FILE__, __LINE__); \ + __bug_trap(); \ +} while (0) +#else +#define BUG() __bug_trap() +#endif + +#define HAVE_ARCH_BUG +#include <asm-generic/bug.h> + +#endif diff --git a/include/asm-sparc/bugs.h b/include/asm-sparc/bugs.h new file mode 100644 index 00000000000..e652f89e0ef --- /dev/null +++ b/include/asm-sparc/bugs.h @@ -0,0 +1,17 @@ +/* $Id: bugs.h,v 1.1 1996/12/26 13:25:20 davem Exp $ + * include/asm-sparc/bugs.h: Sparc probes for various bugs. + * + * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu) + */ + +#include <asm/cpudata.h> +#include <linux/config.h> + +extern unsigned long loops_per_jiffy; + +static void check_bugs(void) +{ +#ifndef CONFIG_SMP + cpu_data(0).udelay_val = loops_per_jiffy; +#endif +} diff --git a/include/asm-sparc/byteorder.h b/include/asm-sparc/byteorder.h new file mode 100644 index 00000000000..a2949aea48e --- /dev/null +++ b/include/asm-sparc/byteorder.h @@ -0,0 +1,14 @@ +/* $Id: byteorder.h,v 1.15 1997/12/16 19:20:44 davem Exp $ */ +#ifndef _SPARC_BYTEORDER_H +#define _SPARC_BYTEORDER_H + +#include <asm/types.h> + +#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__) +# define __BYTEORDER_HAS_U64__ +# define __SWAB_64_THRU_32__ +#endif + +#include <linux/byteorder/big_endian.h> + +#endif /* _SPARC_BYTEORDER_H */ diff --git a/include/asm-sparc/cache.h b/include/asm-sparc/cache.h new file mode 100644 index 00000000000..e6316fd7e1a --- /dev/null +++ b/include/asm-sparc/cache.h @@ -0,0 +1,130 @@ +/* $Id: cache.h,v 1.9 1999/08/14 03:51:58 anton Exp $ + * cache.h: Cache specific code for the Sparc. These include flushing + * and direct tag/data line access. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef _SPARC_CACHE_H +#define _SPARC_CACHE_H + +#include <asm/asi.h> + +#define L1_CACHE_SHIFT 5 +#define L1_CACHE_BYTES 32 +#define L1_CACHE_ALIGN(x) ((((x)+(L1_CACHE_BYTES-1))&~(L1_CACHE_BYTES-1))) +#define L1_CACHE_SHIFT_MAX 5 /* largest L1 which this arch supports */ + +#define SMP_CACHE_BYTES 32 + +/* Direct access to the instruction cache is provided through and + * alternate address space. The IDC bit must be off in the ICCR on + * HyperSparcs for these accesses to work. The code below does not do + * any checking, the caller must do so. These routines are for + * diagnostics only, but could end up being useful. Use with care. + * Also, you are asking for trouble if you execute these in one of the + * three instructions following a %asr/%psr access or modification. + */ + +/* First, cache-tag access. */ +extern __inline__ unsigned int get_icache_tag(int setnum, int tagnum) +{ + unsigned int vaddr, retval; + + vaddr = ((setnum&1) << 12) | ((tagnum&0x7f) << 5); + __asm__ __volatile__("lda [%1] %2, %0\n\t" : + "=r" (retval) : + "r" (vaddr), "i" (ASI_M_TXTC_TAG)); + return retval; +} + +extern __inline__ void put_icache_tag(int setnum, int tagnum, unsigned int entry) +{ + unsigned int vaddr; + + vaddr = ((setnum&1) << 12) | ((tagnum&0x7f) << 5); + __asm__ __volatile__("sta %0, [%1] %2\n\t" : : + "r" (entry), "r" (vaddr), "i" (ASI_M_TXTC_TAG) : + "memory"); +} + +/* Second cache-data access. The data is returned two-32bit quantities + * at a time. + */ +extern __inline__ void get_icache_data(int setnum, int tagnum, int subblock, + unsigned int *data) +{ + unsigned int value1, value2, vaddr; + + vaddr = ((setnum&0x1) << 12) | ((tagnum&0x7f) << 5) | + ((subblock&0x3) << 3); + __asm__ __volatile__("ldda [%2] %3, %%g2\n\t" + "or %%g0, %%g2, %0\n\t" + "or %%g0, %%g3, %1\n\t" : + "=r" (value1), "=r" (value2) : + "r" (vaddr), "i" (ASI_M_TXTC_DATA) : + "g2", "g3"); + data[0] = value1; data[1] = value2; +} + +extern __inline__ void put_icache_data(int setnum, int tagnum, int subblock, + unsigned int *data) +{ + unsigned int value1, value2, vaddr; + + vaddr = ((setnum&0x1) << 12) | ((tagnum&0x7f) << 5) | + ((subblock&0x3) << 3); + value1 = data[0]; value2 = data[1]; + __asm__ __volatile__("or %%g0, %0, %%g2\n\t" + "or %%g0, %1, %%g3\n\t" + "stda %%g2, [%2] %3\n\t" : : + "r" (value1), "r" (value2), + "r" (vaddr), "i" (ASI_M_TXTC_DATA) : + "g2", "g3", "memory" /* no joke */); +} + +/* Different types of flushes with the ICACHE. Some of the flushes + * affect both the ICACHE and the external cache. Others only clear + * the ICACHE entries on the cpu itself. V8's (most) allow + * granularity of flushes on the packet (element in line), whole line, + * and entire cache (ie. all lines) level. The ICACHE only flushes are + * ROSS HyperSparc specific and are in ross.h + */ + +/* Flushes which clear out both the on-chip and external caches */ +extern __inline__ void flush_ei_page(unsigned int addr) +{ + __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : : + "r" (addr), "i" (ASI_M_FLUSH_PAGE) : + "memory"); +} + +extern __inline__ void flush_ei_seg(unsigned int addr) +{ + __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : : + "r" (addr), "i" (ASI_M_FLUSH_SEG) : + "memory"); +} + +extern __inline__ void flush_ei_region(unsigned int addr) +{ + __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : : + "r" (addr), "i" (ASI_M_FLUSH_REGION) : + "memory"); +} + +extern __inline__ void flush_ei_ctx(unsigned int addr) +{ + __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : : + "r" (addr), "i" (ASI_M_FLUSH_CTX) : + "memory"); +} + +extern __inline__ void flush_ei_user(unsigned int addr) +{ + __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : : + "r" (addr), "i" (ASI_M_FLUSH_USER) : + "memory"); +} + +#endif /* !(_SPARC_CACHE_H) */ diff --git a/include/asm-sparc/cacheflush.h b/include/asm-sparc/cacheflush.h new file mode 100644 index 00000000000..4901217008c --- /dev/null +++ b/include/asm-sparc/cacheflush.h @@ -0,0 +1,85 @@ +#ifndef _SPARC_CACHEFLUSH_H +#define _SPARC_CACHEFLUSH_H + +#include <linux/config.h> +#include <linux/mm.h> /* Common for other includes */ +// #include <linux/kernel.h> from pgalloc.h +// #include <linux/sched.h> from pgalloc.h + +// #include <asm/page.h> +#include <asm/btfixup.h> + +/* + * Fine grained cache flushing. + */ +#ifdef CONFIG_SMP + +BTFIXUPDEF_CALL(void, local_flush_cache_all, void) +BTFIXUPDEF_CALL(void, local_flush_cache_mm, struct mm_struct *) +BTFIXUPDEF_CALL(void, local_flush_cache_range, struct vm_area_struct *, unsigned long, unsigned long) +BTFIXUPDEF_CALL(void, local_flush_cache_page, struct vm_area_struct *, unsigned long) + +#define local_flush_cache_all() BTFIXUP_CALL(local_flush_cache_all)() +#define local_flush_cache_mm(mm) BTFIXUP_CALL(local_flush_cache_mm)(mm) +#define local_flush_cache_range(vma,start,end) BTFIXUP_CALL(local_flush_cache_range)(vma,start,end) +#define local_flush_cache_page(vma,addr) BTFIXUP_CALL(local_flush_cache_page)(vma,addr) + +BTFIXUPDEF_CALL(void, local_flush_page_to_ram, unsigned long) +BTFIXUPDEF_CALL(void, local_flush_sig_insns, struct mm_struct *, unsigned long) + +#define local_flush_page_to_ram(addr) BTFIXUP_CALL(local_flush_page_to_ram)(addr) +#define local_flush_sig_insns(mm,insn_addr) BTFIXUP_CALL(local_flush_sig_insns)(mm,insn_addr) + +extern void smp_flush_cache_all(void); +extern void smp_flush_cache_mm(struct mm_struct *mm); +extern void smp_flush_cache_range(struct vm_area_struct *vma, + unsigned long start, + unsigned long end); +extern void smp_flush_cache_page(struct vm_area_struct *vma, unsigned long page); + +extern void smp_flush_page_to_ram(unsigned long page); +extern void smp_flush_sig_insns(struct mm_struct *mm, unsigned long insn_addr); + +#endif /* CONFIG_SMP */ + +BTFIXUPDEF_CALL(void, flush_cache_all, void) +BTFIXUPDEF_CALL(void, flush_cache_mm, struct mm_struct *) +BTFIXUPDEF_CALL(void, flush_cache_range, struct vm_area_struct *, unsigned long, unsigned long) +BTFIXUPDEF_CALL(void, flush_cache_page, struct vm_area_struct *, unsigned long) + +#define flush_cache_all() BTFIXUP_CALL(flush_cache_all)() +#define flush_cache_mm(mm) BTFIXUP_CALL(flush_cache_mm)(mm) +#define flush_cache_range(vma,start,end) BTFIXUP_CALL(flush_cache_range)(vma,start,end) +#define flush_cache_page(vma,addr,pfn) BTFIXUP_CALL(flush_cache_page)(vma,addr) +#define flush_icache_range(start, end) do { } while (0) +#define flush_icache_page(vma, pg) do { } while (0) + +#define flush_icache_user_range(vma,pg,adr,len) do { } while (0) + +#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ + do { \ + flush_cache_page(vma, vaddr, page_to_pfn(page));\ + memcpy(dst, src, len); \ + } while (0) +#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ + do { \ + flush_cache_page(vma, vaddr, page_to_pfn(page));\ + memcpy(dst, src, len); \ + } while (0) + +BTFIXUPDEF_CALL(void, __flush_page_to_ram, unsigned long) +BTFIXUPDEF_CALL(void, flush_sig_insns, struct mm_struct *, unsigned long) + +#define __flush_page_to_ram(addr) BTFIXUP_CALL(__flush_page_to_ram)(addr) +#define flush_sig_insns(mm,insn_addr) BTFIXUP_CALL(flush_sig_insns)(mm,insn_addr) + +extern void sparc_flush_page_to_ram(struct page *page); + +#define flush_dcache_page(page) sparc_flush_page_to_ram(page) +#define flush_dcache_mmap_lock(mapping) do { } while (0) +#define flush_dcache_mmap_unlock(mapping) do { } while (0) + +#define flush_cache_vmap(start, end) flush_cache_all() +#define flush_cache_vunmap(start, end) flush_cache_all() + +#endif /* _SPARC_CACHEFLUSH_H */ diff --git a/include/asm-sparc/checksum.h b/include/asm-sparc/checksum.h new file mode 100644 index 00000000000..28615810897 --- /dev/null +++ b/include/asm-sparc/checksum.h @@ -0,0 +1,253 @@ +/* $Id: checksum.h,v 1.33 2002/02/01 22:01:05 davem Exp $ */ +#ifndef __SPARC_CHECKSUM_H +#define __SPARC_CHECKSUM_H + +/* checksum.h: IP/UDP/TCP checksum routines on the Sparc. + * + * Copyright(C) 1995 Linus Torvalds + * Copyright(C) 1995 Miguel de Icaza + * Copyright(C) 1996 David S. Miller + * Copyright(C) 1996 Eddie C. Dost + * Copyright(C) 1997 Jakub Jelinek + * + * derived from: + * Alpha checksum c-code + * ix86 inline assembly + * RFC1071 Computing the Internet Checksum + */ + +#include <linux/in6.h> +#include <asm/uaccess.h> + +/* computes the checksum of a memory block at buff, length len, + * and adds in "sum" (32-bit) + * + * returns a 32-bit number suitable for feeding into itself + * or csum_tcpudp_magic + * + * this function must be called with even lengths, except + * for the last fragment, which may be odd + * + * it's best to have buff aligned on a 32-bit boundary + */ +extern unsigned int csum_partial(const unsigned char * buff, int len, unsigned int sum); + +/* the same as csum_partial, but copies from fs:src while it + * checksums + * + * here even more important to align src and dst on a 32-bit (or even + * better 64-bit) boundary + */ + +extern unsigned int __csum_partial_copy_sparc_generic (const unsigned char *, unsigned char *); + +static inline unsigned int +csum_partial_copy_nocheck (const unsigned char *src, unsigned char *dst, int len, + unsigned int sum) +{ + register unsigned int ret asm("o0") = (unsigned int)src; + register char *d asm("o1") = dst; + register int l asm("g1") = len; + + __asm__ __volatile__ ( + "call __csum_partial_copy_sparc_generic\n\t" + " mov %6, %%g7\n" + : "=&r" (ret), "=&r" (d), "=&r" (l) + : "0" (ret), "1" (d), "2" (l), "r" (sum) + : "o2", "o3", "o4", "o5", "o7", + "g2", "g3", "g4", "g5", "g7", + "memory", "cc"); + return ret; +} + +static inline unsigned int +csum_partial_copy_from_user(const unsigned char __user *src, unsigned char *dst, int len, + unsigned int sum, int *err) + { + if (!access_ok (VERIFY_READ, src, len)) { + *err = -EFAULT; + memset (dst, 0, len); + return sum; + } else { + register unsigned long ret asm("o0") = (unsigned long)src; + register char *d asm("o1") = dst; + register int l asm("g1") = len; + register unsigned int s asm("g7") = sum; + + __asm__ __volatile__ ( + ".section __ex_table,#alloc\n\t" + ".align 4\n\t" + ".word 1f,2\n\t" + ".previous\n" + "1:\n\t" + "call __csum_partial_copy_sparc_generic\n\t" + " st %8, [%%sp + 64]\n" + : "=&r" (ret), "=&r" (d), "=&r" (l), "=&r" (s) + : "0" (ret), "1" (d), "2" (l), "3" (s), "r" (err) + : "o2", "o3", "o4", "o5", "o7", "g2", "g3", "g4", "g5", + "cc", "memory"); + return ret; + } + } + +static inline unsigned int +csum_partial_copy_to_user(const unsigned char *src, unsigned char __user *dst, int len, + unsigned int sum, int *err) +{ + if (!access_ok (VERIFY_WRITE, dst, len)) { + *err = -EFAULT; + return sum; + } else { + register unsigned long ret asm("o0") = (unsigned long)src; + register char __user *d asm("o1") = dst; + register int l asm("g1") = len; + register unsigned int s asm("g7") = sum; + + __asm__ __volatile__ ( + ".section __ex_table,#alloc\n\t" + ".align 4\n\t" + ".word 1f,1\n\t" + ".previous\n" + "1:\n\t" + "call __csum_partial_copy_sparc_generic\n\t" + " st %8, [%%sp + 64]\n" + : "=&r" (ret), "=&r" (d), "=&r" (l), "=&r" (s) + : "0" (ret), "1" (d), "2" (l), "3" (s), "r" (err) + : "o2", "o3", "o4", "o5", "o7", + "g2", "g3", "g4", "g5", + "cc", "memory"); + return ret; + } +} + +#define HAVE_CSUM_COPY_USER +#define csum_and_copy_to_user csum_partial_copy_to_user + +/* ihl is always 5 or greater, almost always is 5, and iph is word aligned + * the majority of the time. + */ +static inline unsigned short ip_fast_csum(const unsigned char *iph, + unsigned int ihl) +{ + unsigned short sum; + + /* Note: We must read %2 before we touch %0 for the first time, + * because GCC can legitimately use the same register for + * both operands. + */ + __asm__ __volatile__("sub\t%2, 4, %%g4\n\t" + "ld\t[%1 + 0x00], %0\n\t" + "ld\t[%1 + 0x04], %%g2\n\t" + "ld\t[%1 + 0x08], %%g3\n\t" + "addcc\t%%g2, %0, %0\n\t" + "addxcc\t%%g3, %0, %0\n\t" + "ld\t[%1 + 0x0c], %%g2\n\t" + "ld\t[%1 + 0x10], %%g3\n\t" + "addxcc\t%%g2, %0, %0\n\t" + "addx\t%0, %%g0, %0\n" + "1:\taddcc\t%%g3, %0, %0\n\t" + "add\t%1, 4, %1\n\t" + "addxcc\t%0, %%g0, %0\n\t" + "subcc\t%%g4, 1, %%g4\n\t" + "be,a\t2f\n\t" + "sll\t%0, 16, %%g2\n\t" + "b\t1b\n\t" + "ld\t[%1 + 0x10], %%g3\n" + "2:\taddcc\t%0, %%g2, %%g2\n\t" + "srl\t%%g2, 16, %0\n\t" + "addx\t%0, %%g0, %0\n\t" + "xnor\t%%g0, %0, %0" + : "=r" (sum), "=&r" (iph) + : "r" (ihl), "1" (iph) + : "g2", "g3", "g4", "cc"); + return sum; +} + +/* Fold a partial checksum without adding pseudo headers. */ +static inline unsigned int csum_fold(unsigned int sum) +{ + unsigned int tmp; + + __asm__ __volatile__("addcc\t%0, %1, %1\n\t" + "srl\t%1, 16, %1\n\t" + "addx\t%1, %%g0, %1\n\t" + "xnor\t%%g0, %1, %0" + : "=&r" (sum), "=r" (tmp) + : "0" (sum), "1" (sum<<16) + : "cc"); + return sum; +} + +static inline unsigned long csum_tcpudp_nofold(unsigned long saddr, + unsigned long daddr, + unsigned int len, + unsigned short proto, + unsigned int sum) +{ + __asm__ __volatile__("addcc\t%1, %0, %0\n\t" + "addxcc\t%2, %0, %0\n\t" + "addxcc\t%3, %0, %0\n\t" + "addx\t%0, %%g0, %0\n\t" + : "=r" (sum), "=r" (saddr) + : "r" (daddr), "r" ((proto<<16)+len), "0" (sum), + "1" (saddr) + : "cc"); + return sum; +} + +/* + * computes the checksum of the TCP/UDP pseudo-header + * returns a 16-bit checksum, already complemented + */ +static inline unsigned short int csum_tcpudp_magic(unsigned long saddr, + unsigned long daddr, + unsigned short len, + unsigned short proto, + unsigned int sum) +{ + return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum)); +} + +#define _HAVE_ARCH_IPV6_CSUM + +static inline unsigned short int csum_ipv6_magic(struct in6_addr *saddr, + struct in6_addr *daddr, + __u32 len, + unsigned short proto, + unsigned int sum) +{ + __asm__ __volatile__ ( + "addcc %3, %4, %%g4\n\t" + "addxcc %5, %%g4, %%g4\n\t" + "ld [%2 + 0x0c], %%g2\n\t" + "ld [%2 + 0x08], %%g3\n\t" + "addxcc %%g2, %%g4, %%g4\n\t" + "ld [%2 + 0x04], %%g2\n\t" + "addxcc %%g3, %%g4, %%g4\n\t" + "ld [%2 + 0x00], %%g3\n\t" + "addxcc %%g2, %%g4, %%g4\n\t" + "ld [%1 + 0x0c], %%g2\n\t" + "addxcc %%g3, %%g4, %%g4\n\t" + "ld [%1 + 0x08], %%g3\n\t" + "addxcc %%g2, %%g4, %%g4\n\t" + "ld [%1 + 0x04], %%g2\n\t" + "addxcc %%g3, %%g4, %%g4\n\t" + "ld [%1 + 0x00], %%g3\n\t" + "addxcc %%g2, %%g4, %%g4\n\t" + "addxcc %%g3, %%g4, %0\n\t" + "addx 0, %0, %0\n" + : "=&r" (sum) + : "r" (saddr), "r" (daddr), + "r"(htonl(len)), "r"(htonl(proto)), "r"(sum) + : "g2", "g3", "g4", "cc"); + + return csum_fold(sum); +} + +/* this routine is used for miscellaneous IP-like checksums, mainly in icmp.c */ +static inline unsigned short ip_compute_csum(unsigned char * buff, int len) +{ + return csum_fold(csum_partial(buff, len, 0)); +} + +#endif /* !(__SPARC_CHECKSUM_H) */ diff --git a/include/asm-sparc/clock.h b/include/asm-sparc/clock.h new file mode 100644 index 00000000000..e708e6b50d2 --- /dev/null +++ b/include/asm-sparc/clock.h @@ -0,0 +1,11 @@ +/* $Id: clock.h,v 1.3 1995/11/25 02:31:25 davem Exp $ + * clock.h: Definitions for clock operations on the Sparc. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ +#ifndef _SPARC_CLOCK_H +#define _SPARC_CLOCK_H + +/* Foo for now. */ + +#endif /* !(_SPARC_CLOCK_H) */ diff --git a/include/asm-sparc/contregs.h b/include/asm-sparc/contregs.h new file mode 100644 index 00000000000..0e05afe02d4 --- /dev/null +++ b/include/asm-sparc/contregs.h @@ -0,0 +1,54 @@ +/* $Id: contregs.h,v 1.8 2000/12/28 22:49:11 davem Exp $ */ +#ifndef _SPARC_CONTREGS_H +#define _SPARC_CONTREGS_H + +/* contregs.h: Addresses of registers in the ASI_CONTROL alternate address + * space. These are for the mmu's context register, etc. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + +/* 3=sun3 + 4=sun4 (as in sun4 sysmaint student book) + c=sun4c (according to davem) */ + +#define AC_IDPROM 0x00000000 /* 34 ID PROM, R/O, byte, 32 bytes */ +#define AC_PAGEMAP 0x10000000 /* 3 Pagemap R/W, long */ +#define AC_SEGMAP 0x20000000 /* 3 Segment map, byte */ +#define AC_CONTEXT 0x30000000 /* 34c current mmu-context */ +#define AC_SENABLE 0x40000000 /* 34c system dvma/cache/reset enable reg*/ +#define AC_UDVMA_ENB 0x50000000 /* 34 Not used on Sun boards, byte */ +#define AC_BUS_ERROR 0x60000000 /* 34 Not cleared on read, byte. */ +#define AC_SYNC_ERR 0x60000000 /* c fault type */ +#define AC_SYNC_VA 0x60000004 /* c fault virtual address */ +#define AC_ASYNC_ERR 0x60000008 /* c asynchronous fault type */ +#define AC_ASYNC_VA 0x6000000c /* c async fault virtual address */ +#define AC_LEDS 0x70000000 /* 34 Zero turns on LEDs, byte */ +#define AC_CACHETAGS 0x80000000 /* 34c direct access to the VAC tags */ +#define AC_CACHEDDATA 0x90000000 /* 3 c direct access to the VAC data */ +#define AC_UDVMA_MAP 0xD0000000 /* 4 Not used on Sun boards, byte */ +#define AC_VME_VECTOR 0xE0000000 /* 4 For non-Autovector VME, byte */ +#define AC_BOOT_SCC 0xF0000000 /* 34 bypass to access Zilog 8530. byte.*/ + +/* s=Swift, h=Ross_HyperSPARC, v=TI_Viking, t=Tsunami, r=Ross_Cypress */ +#define AC_M_PCR 0x0000 /* shv Processor Control Reg */ +#define AC_M_CTPR 0x0100 /* shv Context Table Pointer Reg */ +#define AC_M_CXR 0x0200 /* shv Context Register */ +#define AC_M_SFSR 0x0300 /* shv Synchronous Fault Status Reg */ +#define AC_M_SFAR 0x0400 /* shv Synchronous Fault Address Reg */ +#define AC_M_AFSR 0x0500 /* hv Asynchronous Fault Status Reg */ +#define AC_M_AFAR 0x0600 /* hv Asynchronous Fault Address Reg */ +#define AC_M_RESET 0x0700 /* hv Reset Reg */ +#define AC_M_RPR 0x1000 /* hv Root Pointer Reg */ +#define AC_M_TSUTRCR 0x1000 /* s TLB Replacement Ctrl Reg */ +#define AC_M_IAPTP 0x1100 /* hv Instruction Access PTP */ +#define AC_M_DAPTP 0x1200 /* hv Data Access PTP */ +#define AC_M_ITR 0x1300 /* hv Index Tag Register */ +#define AC_M_TRCR 0x1400 /* hv TLB Replacement Control Reg */ +#define AC_M_SFSRX 0x1300 /* s Synch Fault Status Reg prim */ +#define AC_M_SFARX 0x1400 /* s Synch Fault Address Reg prim */ +#define AC_M_RPR1 0x1500 /* h Root Pointer Reg (entry 2) */ +#define AC_M_IAPTP1 0x1600 /* h Instruction Access PTP (entry 2) */ +#define AC_M_DAPTP1 0x1700 /* h Data Access PTP (entry 2) */ + +#endif /* _SPARC_CONTREGS_H */ diff --git a/include/asm-sparc/cpudata.h b/include/asm-sparc/cpudata.h new file mode 100644 index 00000000000..ec0d9ef90a3 --- /dev/null +++ b/include/asm-sparc/cpudata.h @@ -0,0 +1,26 @@ +/* cpudata.h: Per-cpu parameters. + * + * Copyright (C) 2004 Keith M Wesolowski (wesolows@foobazco.org) + * + * Based on include/asm-sparc64/cpudata.h and Linux 2.4 smp.h + * both (C) David S. Miller. + */ + +#ifndef _SPARC_CPUDATA_H +#define _SPARC_CPUDATA_H + +#include <linux/percpu.h> + +typedef struct { + unsigned long udelay_val; + unsigned long clock_tick; + unsigned int multiplier; + unsigned int counter; + int prom_node; + int mid; +} cpuinfo_sparc; + +DECLARE_PER_CPU(cpuinfo_sparc, __cpu_data); +#define cpu_data(__cpu) per_cpu(__cpu_data, (__cpu)) + +#endif /* _SPARC_CPUDATA_H */ diff --git a/include/asm-sparc/cputime.h b/include/asm-sparc/cputime.h new file mode 100644 index 00000000000..1a642b81e01 --- /dev/null +++ b/include/asm-sparc/cputime.h @@ -0,0 +1,6 @@ +#ifndef __SPARC_CPUTIME_H +#define __SPARC_CPUTIME_H + +#include <asm-generic/cputime.h> + +#endif /* __SPARC_CPUTIME_H */ diff --git a/include/asm-sparc/current.h b/include/asm-sparc/current.h new file mode 100644 index 00000000000..8fe7c82a5e2 --- /dev/null +++ b/include/asm-sparc/current.h @@ -0,0 +1,31 @@ +/* + * include/asm-sparc/current.h + * + * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation + * Copyright (C) 2002 Pete Zaitcev (zaitcev@yahoo.com) + * + * Derived from "include/asm-s390/current.h" by + * Martin Schwidefsky (schwidefsky@de.ibm.com) + * Derived from "include/asm-i386/current.h" + */ +#ifndef _ASM_CURRENT_H +#define _ASM_CURRENT_H + +/* + * At the sparc64 DaveM keeps current_thread_info in %g4. + * We might want to consider doing the same to shave a few cycles. + */ + +#include <linux/thread_info.h> + +struct task_struct; + +/* Two stage process (inline + #define) for type-checking. */ +/* We also obfuscate get_current() to check if anyone used that by mistake. */ +static inline struct task_struct *__get_current(void) +{ + return current_thread_info()->task; +} +#define current __get_current() + +#endif /* !(_ASM_CURRENT_H) */ diff --git a/include/asm-sparc/cypress.h b/include/asm-sparc/cypress.h new file mode 100644 index 00000000000..fc92fc839c3 --- /dev/null +++ b/include/asm-sparc/cypress.h @@ -0,0 +1,79 @@ +/* $Id: cypress.h,v 1.6 1996/08/29 09:48:09 davem Exp $ + * cypress.h: Cypress module specific definitions and defines. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef _SPARC_CYPRESS_H +#define _SPARC_CYPRESS_H + +/* Cypress chips have %psr 'impl' of '0001' and 'vers' of '0001'. */ + +/* The MMU control register fields on the Sparc Cypress 604/605 MMU's. + * + * --------------------------------------------------------------- + * |implvers| MCA | MCM |MV| MID |BM| C|RSV|MR|CM|CL|CE|RSV|NF|ME| + * --------------------------------------------------------------- + * 31 24 23-22 21-20 19 18-15 14 13 12 11 10 9 8 7-2 1 0 + * + * MCA: MultiChip Access -- Used for configuration of multiple + * CY7C604/605 cache units. + * MCM: MultiChip Mask -- Again, for multiple cache unit config. + * MV: MultiChip Valid -- Indicates MCM and MCA have valid settings. + * MID: ModuleID -- Unique processor ID for MBus transactions. (605 only) + * BM: Boot Mode -- 0 = not in boot mode, 1 = in boot mode + * C: Cacheable -- Indicates whether accesses are cacheable while + * the MMU is off. 0=no 1=yes + * MR: MemoryReflection -- Indicates whether the bus attached to the + * MBus supports memory reflection. 0=no 1=yes (605 only) + * CM: CacheMode -- Indicates whether the cache is operating in write + * through or copy-back mode. 0=write-through 1=copy-back + * CL: CacheLock -- Indicates if the entire cache is locked or not. + * 0=not-locked 1=locked (604 only) + * CE: CacheEnable -- Is the virtual cache on? 0=no 1=yes + * NF: NoFault -- Do faults generate traps? 0=yes 1=no + * ME: MmuEnable -- Is the MMU doing translations? 0=no 1=yes + */ + +#define CYPRESS_MCA 0x00c00000 +#define CYPRESS_MCM 0x00300000 +#define CYPRESS_MVALID 0x00080000 +#define CYPRESS_MIDMASK 0x00078000 /* Only on 605 */ +#define CYPRESS_BMODE 0x00004000 +#define CYPRESS_ACENABLE 0x00002000 +#define CYPRESS_MRFLCT 0x00000800 /* Only on 605 */ +#define CYPRESS_CMODE 0x00000400 +#define CYPRESS_CLOCK 0x00000200 /* Only on 604 */ +#define CYPRESS_CENABLE 0x00000100 +#define CYPRESS_NFAULT 0x00000002 +#define CYPRESS_MENABLE 0x00000001 + +extern __inline__ void cypress_flush_page(unsigned long page) +{ + __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : : + "r" (page), "i" (ASI_M_FLUSH_PAGE)); +} + +extern __inline__ void cypress_flush_segment(unsigned long addr) +{ + __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : : + "r" (addr), "i" (ASI_M_FLUSH_SEG)); +} + +extern __inline__ void cypress_flush_region(unsigned long addr) +{ + __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : : + "r" (addr), "i" (ASI_M_FLUSH_REGION)); +} + +extern __inline__ void cypress_flush_context(void) +{ + __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t" : : + "i" (ASI_M_FLUSH_CTX)); +} + +/* XXX Displacement flushes for buggy chips and initial testing + * XXX go here. + */ + +#endif /* !(_SPARC_CYPRESS_H) */ diff --git a/include/asm-sparc/delay.h b/include/asm-sparc/delay.h new file mode 100644 index 00000000000..6edf2cbb246 --- /dev/null +++ b/include/asm-sparc/delay.h @@ -0,0 +1,35 @@ +/* $Id: delay.h,v 1.11 2001/01/01 01:46:15 davem Exp $ + * delay.h: Linux delay routines on the Sparc. + * + * Copyright (C) 1994 David S. Miller (davem@caip.rutgers.edu). + */ + +#ifndef __SPARC_DELAY_H +#define __SPARC_DELAY_H + +#include <linux/config.h> +#include <asm/cpudata.h> + +extern __inline__ void __delay(unsigned long loops) +{ + __asm__ __volatile__("cmp %0, 0\n\t" + "1: bne 1b\n\t" + "subcc %0, 1, %0\n" : + "=&r" (loops) : + "0" (loops) : + "cc"); +} + +/* This is too messy with inline asm on the Sparc. */ +extern void __udelay(unsigned long usecs, unsigned long lpj); +extern void __ndelay(unsigned long nsecs, unsigned long lpj); + +#ifdef CONFIG_SMP +#define __udelay_val cpu_data(smp_processor_id()).udelay_val +#else /* SMP */ +#define __udelay_val loops_per_jiffy +#endif /* SMP */ +#define udelay(__usecs) __udelay(__usecs, __udelay_val) +#define ndelay(__nsecs) __ndelay(__nsecs, __udelay_val) + +#endif /* defined(__SPARC_DELAY_H) */ diff --git a/include/asm-sparc/div64.h b/include/asm-sparc/div64.h new file mode 100644 index 00000000000..6cd978cefb2 --- /dev/null +++ b/include/asm-sparc/div64.h @@ -0,0 +1 @@ +#include <asm-generic/div64.h> diff --git a/include/asm-sparc/dma-mapping.h b/include/asm-sparc/dma-mapping.h new file mode 100644 index 00000000000..2dc5bb8effa --- /dev/null +++ b/include/asm-sparc/dma-mapping.h @@ -0,0 +1,25 @@ +#ifndef _ASM_SPARC_DMA_MAPPING_H +#define _ASM_SPARC_DMA_MAPPING_H + +#include <linux/config.h> + +#ifdef CONFIG_PCI +#include <asm-generic/dma-mapping.h> +#else + +static inline void *dma_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, int flag) +{ + BUG(); + return NULL; +} + +static inline void dma_free_coherent(struct device *dev, size_t size, + void *vaddr, dma_addr_t dma_handle) +{ + BUG(); +} + +#endif /* PCI */ + +#endif /* _ASM_SPARC_DMA_MAPPING_H */ diff --git a/include/asm-sparc/dma.h b/include/asm-sparc/dma.h new file mode 100644 index 00000000000..07e6368a252 --- /dev/null +++ b/include/asm-sparc/dma.h @@ -0,0 +1,290 @@ +/* $Id: dma.h,v 1.35 1999/12/27 06:37:09 anton Exp $ + * include/asm-sparc/dma.h + * + * Copyright 1995 (C) David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef _ASM_SPARC_DMA_H +#define _ASM_SPARC_DMA_H + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/types.h> + +#include <asm/vac-ops.h> /* for invalidate's, etc. */ +#include <asm/sbus.h> +#include <asm/delay.h> +#include <asm/oplib.h> +#include <asm/system.h> +#include <asm/io.h> +#include <linux/spinlock.h> + +struct page; +extern spinlock_t dma_spin_lock; + +static __inline__ unsigned long claim_dma_lock(void) +{ + unsigned long flags; + spin_lock_irqsave(&dma_spin_lock, flags); + return flags; +} + +static __inline__ void release_dma_lock(unsigned long flags) +{ + spin_unlock_irqrestore(&dma_spin_lock, flags); +} + +/* These are irrelevant for Sparc DMA, but we leave it in so that + * things can compile. + */ +#define MAX_DMA_CHANNELS 8 +#define MAX_DMA_ADDRESS (~0UL) +#define DMA_MODE_READ 1 +#define DMA_MODE_WRITE 2 + +/* Useful constants */ +#define SIZE_16MB (16*1024*1024) +#define SIZE_64K (64*1024) + +/* SBUS DMA controller reg offsets */ +#define DMA_CSR 0x00UL /* rw DMA control/status register 0x00 */ +#define DMA_ADDR 0x04UL /* rw DMA transfer address register 0x04 */ +#define DMA_COUNT 0x08UL /* rw DMA transfer count register 0x08 */ +#define DMA_TEST 0x0cUL /* rw DMA test/debug register 0x0c */ + +/* DVMA chip revisions */ +enum dvma_rev { + dvmarev0, + dvmaesc1, + dvmarev1, + dvmarev2, + dvmarev3, + dvmarevplus, + dvmahme +}; + +#define DMA_HASCOUNT(rev) ((rev)==dvmaesc1) + +/* Linux DMA information structure, filled during probe. */ +struct sbus_dma { + struct sbus_dma *next; + struct sbus_dev *sdev; + void __iomem *regs; + + /* Status, misc info */ + int node; /* Prom node for this DMA device */ + int running; /* Are we doing DMA now? */ + int allocated; /* Are we "owned" by anyone yet? */ + + /* Transfer information. */ + unsigned long addr; /* Start address of current transfer */ + int nbytes; /* Size of current transfer */ + int realbytes; /* For splitting up large transfers, etc. */ + + /* DMA revision */ + enum dvma_rev revision; +}; + +extern struct sbus_dma *dma_chain; + +/* Broken hardware... */ +#ifdef CONFIG_SUN4 +/* Have to sort this out. Does rev0 work fine on sun4[cmd] without isbroken? + * Or is rev0 present only on sun4 boxes? -jj */ +#define DMA_ISBROKEN(dma) ((dma)->revision == dvmarev0 || (dma)->revision == dvmarev1) +#else +#define DMA_ISBROKEN(dma) ((dma)->revision == dvmarev1) +#endif +#define DMA_ISESC1(dma) ((dma)->revision == dvmaesc1) + +/* Main routines in dma.c */ +extern void dvma_init(struct sbus_bus *); + +/* Fields in the cond_reg register */ +/* First, the version identification bits */ +#define DMA_DEVICE_ID 0xf0000000 /* Device identification bits */ +#define DMA_VERS0 0x00000000 /* Sunray DMA version */ +#define DMA_ESCV1 0x40000000 /* DMA ESC Version 1 */ +#define DMA_VERS1 0x80000000 /* DMA rev 1 */ +#define DMA_VERS2 0xa0000000 /* DMA rev 2 */ +#define DMA_VERHME 0xb0000000 /* DMA hme gate array */ +#define DMA_VERSPLUS 0x90000000 /* DMA rev 1 PLUS */ + +#define DMA_HNDL_INTR 0x00000001 /* An IRQ needs to be handled */ +#define DMA_HNDL_ERROR 0x00000002 /* We need to take an error */ +#define DMA_FIFO_ISDRAIN 0x0000000c /* The DMA FIFO is draining */ +#define DMA_INT_ENAB 0x00000010 /* Turn on interrupts */ +#define DMA_FIFO_INV 0x00000020 /* Invalidate the FIFO */ +#define DMA_ACC_SZ_ERR 0x00000040 /* The access size was bad */ +#define DMA_FIFO_STDRAIN 0x00000040 /* DMA_VERS1 Drain the FIFO */ +#define DMA_RST_SCSI 0x00000080 /* Reset the SCSI controller */ +#define DMA_RST_ENET DMA_RST_SCSI /* Reset the ENET controller */ +#define DMA_RST_BPP DMA_RST_SCSI /* Reset the BPP controller */ +#define DMA_ST_WRITE 0x00000100 /* write from device to memory */ +#define DMA_ENABLE 0x00000200 /* Fire up DMA, handle requests */ +#define DMA_PEND_READ 0x00000400 /* DMA_VERS1/0/PLUS Pending Read */ +#define DMA_ESC_BURST 0x00000800 /* 1=16byte 0=32byte */ +#define DMA_READ_AHEAD 0x00001800 /* DMA read ahead partial longword */ +#define DMA_DSBL_RD_DRN 0x00001000 /* No EC drain on slave reads */ +#define DMA_BCNT_ENAB 0x00002000 /* If on, use the byte counter */ +#define DMA_TERM_CNTR 0x00004000 /* Terminal counter */ +#define DMA_SCSI_SBUS64 0x00008000 /* HME: Enable 64-bit SBUS mode. */ +#define DMA_CSR_DISAB 0x00010000 /* No FIFO drains during csr */ +#define DMA_SCSI_DISAB 0x00020000 /* No FIFO drains during reg */ +#define DMA_DSBL_WR_INV 0x00020000 /* No EC inval. on slave writes */ +#define DMA_ADD_ENABLE 0x00040000 /* Special ESC DVMA optimization */ +#define DMA_E_BURSTS 0x000c0000 /* ENET: SBUS r/w burst mask */ +#define DMA_E_BURST32 0x00040000 /* ENET: SBUS 32 byte r/w burst */ +#define DMA_E_BURST16 0x00000000 /* ENET: SBUS 16 byte r/w burst */ +#define DMA_BRST_SZ 0x000c0000 /* SCSI: SBUS r/w burst size */ +#define DMA_BRST64 0x00080000 /* SCSI: 64byte bursts (HME on UltraSparc only) */ +#define DMA_BRST32 0x00040000 /* SCSI/BPP: 32byte bursts */ +#define DMA_BRST16 0x00000000 /* SCSI/BPP: 16byte bursts */ +#define DMA_BRST0 0x00080000 /* SCSI: no bursts (non-HME gate arrays) */ +#define DMA_ADDR_DISAB 0x00100000 /* No FIFO drains during addr */ +#define DMA_2CLKS 0x00200000 /* Each transfer = 2 clock ticks */ +#define DMA_3CLKS 0x00400000 /* Each transfer = 3 clock ticks */ +#define DMA_EN_ENETAUI DMA_3CLKS /* Put lance into AUI-cable mode */ +#define DMA_CNTR_DISAB 0x00800000 /* No IRQ when DMA_TERM_CNTR set */ +#define DMA_AUTO_NADDR 0x01000000 /* Use "auto nxt addr" feature */ +#define DMA_SCSI_ON 0x02000000 /* Enable SCSI dma */ +#define DMA_BPP_ON DMA_SCSI_ON /* Enable BPP dma */ +#define DMA_PARITY_OFF 0x02000000 /* HME: disable parity checking */ +#define DMA_LOADED_ADDR 0x04000000 /* Address has been loaded */ +#define DMA_LOADED_NADDR 0x08000000 /* Next address has been loaded */ +#define DMA_RESET_FAS366 0x08000000 /* HME: Assert RESET to FAS366 */ + +/* Values describing the burst-size property from the PROM */ +#define DMA_BURST1 0x01 +#define DMA_BURST2 0x02 +#define DMA_BURST4 0x04 +#define DMA_BURST8 0x08 +#define DMA_BURST16 0x10 +#define DMA_BURST32 0x20 +#define DMA_BURST64 0x40 +#define DMA_BURSTBITS 0x7f + +/* Determine highest possible final transfer address given a base */ +#define DMA_MAXEND(addr) (0x01000000UL-(((unsigned long)(addr))&0x00ffffffUL)) + +/* Yes, I hack a lot of elisp in my spare time... */ +#define DMA_ERROR_P(regs) ((((regs)->cond_reg) & DMA_HNDL_ERROR)) +#define DMA_IRQ_P(regs) ((((regs)->cond_reg) & (DMA_HNDL_INTR | DMA_HNDL_ERROR))) +#define DMA_WRITE_P(regs) ((((regs)->cond_reg) & DMA_ST_WRITE)) +#define DMA_OFF(regs) ((((regs)->cond_reg) &= (~DMA_ENABLE))) +#define DMA_INTSOFF(regs) ((((regs)->cond_reg) &= (~DMA_INT_ENAB))) +#define DMA_INTSON(regs) ((((regs)->cond_reg) |= (DMA_INT_ENAB))) +#define DMA_PUNTFIFO(regs) ((((regs)->cond_reg) |= DMA_FIFO_INV)) +#define DMA_SETSTART(regs, addr) ((((regs)->st_addr) = (char *) addr)) +#define DMA_BEGINDMA_W(regs) \ + ((((regs)->cond_reg |= (DMA_ST_WRITE|DMA_ENABLE|DMA_INT_ENAB)))) +#define DMA_BEGINDMA_R(regs) \ + ((((regs)->cond_reg |= ((DMA_ENABLE|DMA_INT_ENAB)&(~DMA_ST_WRITE))))) + +/* For certain DMA chips, we need to disable ints upon irq entry + * and turn them back on when we are done. So in any ESP interrupt + * handler you *must* call DMA_IRQ_ENTRY upon entry and DMA_IRQ_EXIT + * when leaving the handler. You have been warned... + */ +#define DMA_IRQ_ENTRY(dma, dregs) do { \ + if(DMA_ISBROKEN(dma)) DMA_INTSOFF(dregs); \ + } while (0) + +#define DMA_IRQ_EXIT(dma, dregs) do { \ + if(DMA_ISBROKEN(dma)) DMA_INTSON(dregs); \ + } while(0) + +#if 0 /* P3 this stuff is inline in ledma.c:init_restart_ledma() */ +/* Pause until counter runs out or BIT isn't set in the DMA condition + * register. + */ +extern __inline__ void sparc_dma_pause(struct sparc_dma_registers *regs, + unsigned long bit) +{ + int ctr = 50000; /* Let's find some bugs ;) */ + + /* Busy wait until the bit is not set any more */ + while((regs->cond_reg&bit) && (ctr>0)) { + ctr--; + __delay(5); + } + + /* Check for bogus outcome. */ + if(!ctr) + panic("DMA timeout"); +} + +/* Reset the friggin' thing... */ +#define DMA_RESET(dma) do { \ + struct sparc_dma_registers *regs = dma->regs; \ + /* Let the current FIFO drain itself */ \ + sparc_dma_pause(regs, (DMA_FIFO_ISDRAIN)); \ + /* Reset the logic */ \ + regs->cond_reg |= (DMA_RST_SCSI); /* assert */ \ + __delay(400); /* let the bits set ;) */ \ + regs->cond_reg &= ~(DMA_RST_SCSI); /* de-assert */ \ + sparc_dma_enable_interrupts(regs); /* Re-enable interrupts */ \ + /* Enable FAST transfers if available */ \ + if(dma->revision>dvmarev1) regs->cond_reg |= DMA_3CLKS; \ + dma->running = 0; \ +} while(0) +#endif + +#define for_each_dvma(dma) \ + for((dma) = dma_chain; (dma); (dma) = (dma)->next) + +extern int get_dma_list(char *); +extern int request_dma(unsigned int, __const__ char *); +extern void free_dma(unsigned int); + +/* From PCI */ + +#ifdef CONFIG_PCI +extern int isa_dma_bridge_buggy; +#else +#define isa_dma_bridge_buggy (0) +#endif + +/* Routines for data transfer buffers. */ +BTFIXUPDEF_CALL(char *, mmu_lockarea, char *, unsigned long) +BTFIXUPDEF_CALL(void, mmu_unlockarea, char *, unsigned long) + +#define mmu_lockarea(vaddr,len) BTFIXUP_CALL(mmu_lockarea)(vaddr,len) +#define mmu_unlockarea(vaddr,len) BTFIXUP_CALL(mmu_unlockarea)(vaddr,len) + +/* These are implementations for sbus_map_sg/sbus_unmap_sg... collapse later */ +BTFIXUPDEF_CALL(__u32, mmu_get_scsi_one, char *, unsigned long, struct sbus_bus *sbus) +BTFIXUPDEF_CALL(void, mmu_get_scsi_sgl, struct scatterlist *, int, struct sbus_bus *sbus) +BTFIXUPDEF_CALL(void, mmu_release_scsi_one, __u32, unsigned long, struct sbus_bus *sbus) +BTFIXUPDEF_CALL(void, mmu_release_scsi_sgl, struct scatterlist *, int, struct sbus_bus *sbus) + +#define mmu_get_scsi_one(vaddr,len,sbus) BTFIXUP_CALL(mmu_get_scsi_one)(vaddr,len,sbus) +#define mmu_get_scsi_sgl(sg,sz,sbus) BTFIXUP_CALL(mmu_get_scsi_sgl)(sg,sz,sbus) +#define mmu_release_scsi_one(vaddr,len,sbus) BTFIXUP_CALL(mmu_release_scsi_one)(vaddr,len,sbus) +#define mmu_release_scsi_sgl(sg,sz,sbus) BTFIXUP_CALL(mmu_release_scsi_sgl)(sg,sz,sbus) + +/* + * mmu_map/unmap are provided by iommu/iounit; Invalid to call on IIep. + * + * The mmu_map_dma_area establishes two mappings in one go. + * These mappings point to pages normally mapped at 'va' (linear address). + * First mapping is for CPU visible address at 'a', uncached. + * This is an alias, but it works because it is an uncached mapping. + * Second mapping is for device visible address, or "bus" address. + * The bus address is returned at '*pba'. + * + * These functions seem distinct, but are hard to split. On sun4c, + * at least for now, 'a' is equal to bus address, and retured in *pba. + * On sun4m, page attributes depend on the CPU type, so we have to + * know if we are mapping RAM or I/O, so it has to be an additional argument + * to a separate mapping function for CPU visible mappings. + */ +BTFIXUPDEF_CALL(int, mmu_map_dma_area, dma_addr_t *, unsigned long, unsigned long, int len) +BTFIXUPDEF_CALL(struct page *, mmu_translate_dvma, unsigned long busa) +BTFIXUPDEF_CALL(void, mmu_unmap_dma_area, unsigned long busa, int len) + +#define mmu_map_dma_area(pba,va,a,len) BTFIXUP_CALL(mmu_map_dma_area)(pba,va,a,len) +#define mmu_unmap_dma_area(ba,len) BTFIXUP_CALL(mmu_unmap_dma_area)(ba,len) +#define mmu_translate_dvma(ba) BTFIXUP_CALL(mmu_translate_dvma)(ba) + +#endif /* !(_ASM_SPARC_DMA_H) */ diff --git a/include/asm-sparc/ebus.h b/include/asm-sparc/ebus.h new file mode 100644 index 00000000000..2d6a997c5b0 --- /dev/null +++ b/include/asm-sparc/ebus.h @@ -0,0 +1,98 @@ +/* $Id: ebus.h,v 1.2 1999/09/11 23:05:55 zaitcev Exp $ + * ebus.h: PCI to Ebus pseudo driver software state. + * + * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be) + * + * Adopted for sparc by V. Roganov and G. Raiko. + */ + +#ifndef __SPARC_EBUS_H +#define __SPARC_EBUS_H + +#ifndef _LINUX_IOPORT_H +#include <linux/ioport.h> +#endif +#include <asm/oplib.h> + +struct linux_ebus_child { + struct linux_ebus_child *next; + struct linux_ebus_device *parent; + struct linux_ebus *bus; + int prom_node; + char prom_name[64]; + struct resource resource[PROMREG_MAX]; + int num_addrs; + unsigned int irqs[PROMINTR_MAX]; + int num_irqs; +}; + +struct linux_ebus_device { + struct linux_ebus_device *next; + struct linux_ebus_child *children; + struct linux_ebus *bus; + int prom_node; + char prom_name[64]; + struct resource resource[PROMREG_MAX]; + int num_addrs; + unsigned int irqs[PROMINTR_MAX]; + int num_irqs; +}; + +struct linux_ebus { + struct linux_ebus *next; + struct linux_ebus_device *devices; + struct linux_pbm_info *parent; + struct pci_dev *self; + int prom_node; + char prom_name[64]; + struct linux_prom_ebus_ranges ebus_ranges[PROMREG_MAX]; + int num_ebus_ranges; +}; + +struct linux_ebus_dma { + unsigned int dcsr; + unsigned int dacr; + unsigned int dbcr; +}; + +#define EBUS_DCSR_INT_PEND 0x00000001 +#define EBUS_DCSR_ERR_PEND 0x00000002 +#define EBUS_DCSR_DRAIN 0x00000004 +#define EBUS_DCSR_INT_EN 0x00000010 +#define EBUS_DCSR_RESET 0x00000080 +#define EBUS_DCSR_WRITE 0x00000100 +#define EBUS_DCSR_EN_DMA 0x00000200 +#define EBUS_DCSR_CYC_PEND 0x00000400 +#define EBUS_DCSR_DIAG_RD_DONE 0x00000800 +#define EBUS_DCSR_DIAG_WR_DONE 0x00001000 +#define EBUS_DCSR_EN_CNT 0x00002000 +#define EBUS_DCSR_TC 0x00004000 +#define EBUS_DCSR_DIS_CSR_DRN 0x00010000 +#define EBUS_DCSR_BURST_SZ_MASK 0x000c0000 +#define EBUS_DCSR_BURST_SZ_1 0x00080000 +#define EBUS_DCSR_BURST_SZ_4 0x00000000 +#define EBUS_DCSR_BURST_SZ_8 0x00040000 +#define EBUS_DCSR_BURST_SZ_16 0x000c0000 +#define EBUS_DCSR_DIAG_EN 0x00100000 +#define EBUS_DCSR_DIS_ERR_PEND 0x00400000 +#define EBUS_DCSR_TCI_DIS 0x00800000 +#define EBUS_DCSR_EN_NEXT 0x01000000 +#define EBUS_DCSR_DMA_ON 0x02000000 +#define EBUS_DCSR_A_LOADED 0x04000000 +#define EBUS_DCSR_NA_LOADED 0x08000000 +#define EBUS_DCSR_DEV_ID_MASK 0xf0000000 + +extern struct linux_ebus *ebus_chain; + +extern void ebus_init(void); + +#define for_each_ebus(bus) \ + for((bus) = ebus_chain; (bus); (bus) = (bus)->next) + +#define for_each_ebusdev(dev, bus) \ + for((dev) = (bus)->devices; (dev); (dev) = (dev)->next) + +#define for_each_edevchild(dev, child) \ + for((child) = (dev)->children; (child); (child) = (child)->next) + +#endif /* !(__SPARC_EBUS_H) */ diff --git a/include/asm-sparc/ecc.h b/include/asm-sparc/ecc.h new file mode 100644 index 00000000000..8e27ceccb76 --- /dev/null +++ b/include/asm-sparc/ecc.h @@ -0,0 +1,122 @@ +/* $Id: ecc.h,v 1.3 1996/04/25 06:12:57 davem Exp $ + * ecc.h: Definitions and defines for the external cache/memory + * controller on the sun4m. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef _SPARC_ECC_H +#define _SPARC_ECC_H + +/* These registers are accessed through the SRMMU passthrough ASI 0x20 */ +#define ECC_ENABLE 0x00000000 /* ECC enable register */ +#define ECC_FSTATUS 0x00000008 /* ECC fault status register */ +#define ECC_FADDR 0x00000010 /* ECC fault address register */ +#define ECC_DIGNOSTIC 0x00000018 /* ECC diagnostics register */ +#define ECC_MBAENAB 0x00000020 /* MBus arbiter enable register */ +#define ECC_DMESG 0x00001000 /* Diagnostic message passing area */ + +/* ECC MBus Arbiter Enable register: + * + * ---------------------------------------- + * | |SBUS|MOD3|MOD2|MOD1|RSV| + * ---------------------------------------- + * 31 5 4 3 2 1 0 + * + * SBUS: Enable MBus Arbiter on the SBus 0=off 1=on + * MOD3: Enable MBus Arbiter on MBus module 3 0=off 1=on + * MOD2: Enable MBus Arbiter on MBus module 2 0=off 1=on + * MOD1: Enable MBus Arbiter on MBus module 1 0=off 1=on + */ + +#define ECC_MBAE_SBUS 0x00000010 +#define ECC_MBAE_MOD3 0x00000008 +#define ECC_MBAE_MOD2 0x00000004 +#define ECC_MBAE_MOD1 0x00000002 + +/* ECC Fault Control Register layout: + * + * ----------------------------- + * | RESV | ECHECK | EINT | + * ----------------------------- + * 31 2 1 0 + * + * ECHECK: Enable ECC checking. 0=off 1=on + * EINT: Enable Interrupts for correctable errors. 0=off 1=on + */ +#define ECC_FCR_CHECK 0x00000002 +#define ECC_FCR_INTENAB 0x00000001 + +/* ECC Fault Address Register Zero layout: + * + * ----------------------------------------------------- + * | MID | S | RSV | VA | BM |AT| C| SZ |TYP| PADDR | + * ----------------------------------------------------- + * 31-28 27 26-22 21-14 13 12 11 10-8 7-4 3-0 + * + * MID: ModuleID of the faulting processor. ie. who did it? + * S: Supervisor/Privileged access? 0=no 1=yes + * VA: Bits 19-12 of the virtual faulting address, these are the + * superset bits in the virtual cache and can be used for + * a flush operation if necessary. + * BM: Boot mode? 0=no 1=yes This is just like the SRMMU boot + * mode bit. + * AT: Did this fault happen during an atomic instruction? 0=no + * 1=yes. This means either an 'ldstub' or 'swap' instruction + * was in progress (but not finished) when this fault happened. + * This indicated whether the bus was locked when the fault + * occurred. + * C: Did the pte for this access indicate that it was cacheable? + * 0=no 1=yes + * SZ: The size of the transaction. + * TYP: The transaction type. + * PADDR: Bits 35-32 of the physical address for the fault. + */ +#define ECC_FADDR0_MIDMASK 0xf0000000 +#define ECC_FADDR0_S 0x08000000 +#define ECC_FADDR0_VADDR 0x003fc000 +#define ECC_FADDR0_BMODE 0x00002000 +#define ECC_FADDR0_ATOMIC 0x00001000 +#define ECC_FADDR0_CACHE 0x00000800 +#define ECC_FADDR0_SIZE 0x00000700 +#define ECC_FADDR0_TYPE 0x000000f0 +#define ECC_FADDR0_PADDR 0x0000000f + +/* ECC Fault Address Register One layout: + * + * ------------------------------------- + * | Physical Address 31-0 | + * ------------------------------------- + * 31 0 + * + * You get the upper 4 bits of the physical address from the + * PADDR field in ECC Fault Address Zero register. + */ + +/* ECC Fault Status Register layout: + * + * ---------------------------------------------- + * | RESV|C2E|MULT|SYNDROME|DWORD|UNC|TIMEO|BS|C| + * ---------------------------------------------- + * 31-18 17 16 15-8 7-4 3 2 1 0 + * + * C2E: A C2 graphics error occurred. 0=no 1=yes (SS10 only) + * MULT: Multiple errors occurred ;-O 0=no 1=prom_panic(yes) + * SYNDROME: Controller is mentally unstable. + * DWORD: + * UNC: Uncorrectable error. 0=no 1=yes + * TIMEO: Timeout occurred. 0=no 1=yes + * BS: C2 graphics bad slot access. 0=no 1=yes (SS10 only) + * C: Correctable error? 0=no 1=yes + */ + +#define ECC_FSR_C2ERR 0x00020000 +#define ECC_FSR_MULT 0x00010000 +#define ECC_FSR_SYND 0x0000ff00 +#define ECC_FSR_DWORD 0x000000f0 +#define ECC_FSR_UNC 0x00000008 +#define ECC_FSR_TIMEO 0x00000004 +#define ECC_FSR_BADSLOT 0x00000002 +#define ECC_FSR_C 0x00000001 + +#endif /* !(_SPARC_ECC_H) */ diff --git a/include/asm-sparc/eeprom.h b/include/asm-sparc/eeprom.h new file mode 100644 index 00000000000..a8ff7496ddf --- /dev/null +++ b/include/asm-sparc/eeprom.h @@ -0,0 +1,9 @@ +/* $Id: eeprom.h,v 1.3 1995/11/25 02:31:38 davem Exp $ + * eeprom.h: Definitions for the Sun eeprom. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + +/* The EEPROM and the Mostek Mk48t02 use the same IO address space + * for their registers/data areas. The IDPROM lives here too. + */ diff --git a/include/asm-sparc/elf.h b/include/asm-sparc/elf.h new file mode 100644 index 00000000000..4a71d7c1eac --- /dev/null +++ b/include/asm-sparc/elf.h @@ -0,0 +1,173 @@ +/* $Id: elf.h,v 1.22 2000/07/12 01:27:08 davem Exp $ */ +#ifndef __ASMSPARC_ELF_H +#define __ASMSPARC_ELF_H + +/* + * ELF register definitions.. + */ + +#include <linux/config.h> +#include <asm/ptrace.h> + +#ifdef __KERNEL__ +#include <asm/mbus.h> +#include <asm/uaccess.h> +#endif + +/* + * Sparc section types + */ +#define STT_REGISTER 13 + +/* + * Sparc ELF relocation types + */ +#define R_SPARC_NONE 0 +#define R_SPARC_8 1 +#define R_SPARC_16 2 +#define R_SPARC_32 3 +#define R_SPARC_DISP8 4 +#define R_SPARC_DISP16 5 +#define R_SPARC_DISP32 6 +#define R_SPARC_WDISP30 7 +#define R_SPARC_WDISP22 8 +#define R_SPARC_HI22 9 +#define R_SPARC_22 10 +#define R_SPARC_13 11 +#define R_SPARC_LO10 12 +#define R_SPARC_GOT10 13 +#define R_SPARC_GOT13 14 +#define R_SPARC_GOT22 15 +#define R_SPARC_PC10 16 +#define R_SPARC_PC22 17 +#define R_SPARC_WPLT30 18 +#define R_SPARC_COPY 19 +#define R_SPARC_GLOB_DAT 20 +#define R_SPARC_JMP_SLOT 21 +#define R_SPARC_RELATIVE 22 +#define R_SPARC_UA32 23 +#define R_SPARC_PLT32 24 +#define R_SPARC_HIPLT22 25 +#define R_SPARC_LOPLT10 26 +#define R_SPARC_PCPLT32 27 +#define R_SPARC_PCPLT22 28 +#define R_SPARC_PCPLT10 29 +#define R_SPARC_10 30 +#define R_SPARC_11 31 +#define R_SPARC_64 32 +#define R_SPARC_OLO10 33 +#define R_SPARC_WDISP16 40 +#define R_SPARC_WDISP19 41 +#define R_SPARC_7 43 +#define R_SPARC_5 44 +#define R_SPARC_6 45 + +/* Bits present in AT_HWCAP, primarily for Sparc32. */ + +#define HWCAP_SPARC_FLUSH 1 /* CPU supports flush instruction. */ +#define HWCAP_SPARC_STBAR 2 +#define HWCAP_SPARC_SWAP 4 +#define HWCAP_SPARC_MULDIV 8 +#define HWCAP_SPARC_V9 16 +#define HWCAP_SPARC_ULTRA3 32 + +/* For the most part we present code dumps in the format + * Solaris does. + */ +typedef unsigned long elf_greg_t; +#define ELF_NGREG 38 +typedef elf_greg_t elf_gregset_t[ELF_NGREG]; + +/* Format is: + * G0 --> G7 + * O0 --> O7 + * L0 --> L7 + * I0 --> I7 + * PSR, PC, nPC, Y, WIM, TBR + */ +#define ELF_CORE_COPY_REGS(__elf_regs, __pt_regs) \ +do { unsigned long *dest = &(__elf_regs[0]); \ + struct pt_regs *src = (__pt_regs); \ + unsigned long __user *sp; \ + memcpy(&dest[0], &src->u_regs[0], \ + sizeof(unsigned long) * 16); \ + /* Don't try this at home kids... */ \ + sp = (unsigned long __user *) src->u_regs[14]; \ + copy_from_user(&dest[16], sp, \ + sizeof(unsigned long) * 16); \ + dest[32] = src->psr; \ + dest[33] = src->pc; \ + dest[34] = src->npc; \ + dest[35] = src->y; \ + dest[36] = dest[37] = 0; /* XXX */ \ +} while(0); /* Janitors: Don't touch this colon. */ + +typedef struct { + union { + unsigned long pr_regs[32]; + double pr_dregs[16]; + } pr_fr; + unsigned long __unused; + unsigned long pr_fsr; + unsigned char pr_qcnt; + unsigned char pr_q_entrysize; + unsigned char pr_en; + unsigned int pr_q[64]; +} elf_fpregset_t; + +#define ELF_CORE_COPY_TASK_REGS(__tsk, __elf_regs) \ + ({ ELF_CORE_COPY_REGS((*(__elf_regs)), (__tsk)->thread.kregs); 1; }) + +/* + * This is used to ensure we don't load something for the wrong architecture. + */ +#define elf_check_arch(x) ((x)->e_machine == EM_SPARC) + +/* + * These are used to set parameters in the core dumps. + */ +#define ELF_ARCH EM_SPARC +#define ELF_CLASS ELFCLASS32 +#define ELF_DATA ELFDATA2MSB + +#define USE_ELF_CORE_DUMP +#ifndef CONFIG_SUN4 +#define ELF_EXEC_PAGESIZE 4096 +#else +#define ELF_EXEC_PAGESIZE 8192 +#endif + + +/* This is the location that an ET_DYN program is loaded if exec'ed. Typical + use of this is to invoke "./ld.so someprog" to test out a new version of + the loader. We need to make sure that it is out of the way of the program + that it will "exec", and that there is sufficient room for the brk. */ + +#define ELF_ET_DYN_BASE (TASK_UNMAPPED_BASE) + +/* This yields a mask that user programs can use to figure out what + instruction set this cpu supports. This can NOT be done in userspace + on Sparc. */ + +/* Sun4c has none of the capabilities, most sun4m's have them all. + * XXX This is gross, set some global variable at boot time. -DaveM + */ +#define ELF_HWCAP ((ARCH_SUN4C_SUN4) ? 0 : \ + (HWCAP_SPARC_FLUSH | HWCAP_SPARC_STBAR | \ + HWCAP_SPARC_SWAP | \ + ((srmmu_modtype != Cypress && \ + srmmu_modtype != Cypress_vE && \ + srmmu_modtype != Cypress_vD) ? \ + HWCAP_SPARC_MULDIV : 0))) + +/* This yields a string that ld.so will use to load implementation + specific libraries for optimization. This is more specific in + intent than poking at uname or /proc/cpuinfo. */ + +#define ELF_PLATFORM (NULL) + +#ifdef __KERNEL__ +#define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX) +#endif + +#endif /* !(__ASMSPARC_ELF_H) */ diff --git a/include/asm-sparc/errno.h b/include/asm-sparc/errno.h new file mode 100644 index 00000000000..8c01c5f3b06 --- /dev/null +++ b/include/asm-sparc/errno.h @@ -0,0 +1,110 @@ +/* $Id: errno.h,v 1.6 1997/04/15 09:03:38 davem Exp $ */ +#ifndef _SPARC_ERRNO_H +#define _SPARC_ERRNO_H + +/* These match the SunOS error numbering scheme. */ + +#include <asm-generic/errno-base.h> + +#define EWOULDBLOCK EAGAIN /* Operation would block */ +#define EINPROGRESS 36 /* Operation now in progress */ +#define EALREADY 37 /* Operation already in progress */ +#define ENOTSOCK 38 /* Socket operation on non-socket */ +#define EDESTADDRREQ 39 /* Destination address required */ +#define EMSGSIZE 40 /* Message too long */ +#define EPROTOTYPE 41 /* Protocol wrong type for socket */ +#define ENOPROTOOPT 42 /* Protocol not available */ +#define EPROTONOSUPPORT 43 /* Protocol not supported */ +#define ESOCKTNOSUPPORT 44 /* Socket type not supported */ +#define EOPNOTSUPP 45 /* Op not supported on transport endpoint */ +#define EPFNOSUPPORT 46 /* Protocol family not supported */ +#define EAFNOSUPPORT 47 /* Address family not supported by protocol */ +#define EADDRINUSE 48 /* Address already in use */ +#define EADDRNOTAVAIL 49 /* Cannot assign requested address */ +#define ENETDOWN 50 /* Network is down */ +#define ENETUNREACH 51 /* Network is unreachable */ +#define ENETRESET 52 /* Net dropped connection because of reset */ +#define ECONNABORTED 53 /* Software caused connection abort */ +#define ECONNRESET 54 /* Connection reset by peer */ +#define ENOBUFS 55 /* No buffer space available */ +#define EISCONN 56 /* Transport endpoint is already connected */ +#define ENOTCONN 57 /* Transport endpoint is not connected */ +#define ESHUTDOWN 58 /* No send after transport endpoint shutdown */ +#define ETOOMANYREFS 59 /* Too many references: cannot splice */ +#define ETIMEDOUT 60 /* Connection timed out */ +#define ECONNREFUSED 61 /* Connection refused */ +#define ELOOP 62 /* Too many symbolic links encountered */ +#define ENAMETOOLONG 63 /* File name too long */ +#define EHOSTDOWN 64 /* Host is down */ +#define EHOSTUNREACH 65 /* No route to host */ +#define ENOTEMPTY 66 /* Directory not empty */ +#define EPROCLIM 67 /* SUNOS: Too many processes */ +#define EUSERS 68 /* Too many users */ +#define EDQUOT 69 /* Quota exceeded */ +#define ESTALE 70 /* Stale NFS file handle */ +#define EREMOTE 71 /* Object is remote */ +#define ENOSTR 72 /* Device not a stream */ +#define ETIME 73 /* Timer expired */ +#define ENOSR 74 /* Out of streams resources */ +#define ENOMSG 75 /* No message of desired type */ +#define EBADMSG 76 /* Not a data message */ +#define EIDRM 77 /* Identifier removed */ +#define EDEADLK 78 /* Resource deadlock would occur */ +#define ENOLCK 79 /* No record locks available */ +#define ENONET 80 /* Machine is not on the network */ +#define ERREMOTE 81 /* SunOS: Too many lvls of remote in path */ +#define ENOLINK 82 /* Link has been severed */ +#define EADV 83 /* Advertise error */ +#define ESRMNT 84 /* Srmount error */ +#define ECOMM 85 /* Communication error on send */ +#define EPROTO 86 /* Protocol error */ +#define EMULTIHOP 87 /* Multihop attempted */ +#define EDOTDOT 88 /* RFS specific error */ +#define EREMCHG 89 /* Remote address changed */ +#define ENOSYS 90 /* Function not implemented */ + +/* The rest have no SunOS equivalent. */ +#define ESTRPIPE 91 /* Streams pipe error */ +#define EOVERFLOW 92 /* Value too large for defined data type */ +#define EBADFD 93 /* File descriptor in bad state */ +#define ECHRNG 94 /* Channel number out of range */ +#define EL2NSYNC 95 /* Level 2 not synchronized */ +#define EL3HLT 96 /* Level 3 halted */ +#define EL3RST 97 /* Level 3 reset */ +#define ELNRNG 98 /* Link number out of range */ +#define EUNATCH 99 /* Protocol driver not attached */ +#define ENOCSI 100 /* No CSI structure available */ +#define EL2HLT 101 /* Level 2 halted */ +#define EBADE 102 /* Invalid exchange */ +#define EBADR 103 /* Invalid request descriptor */ +#define EXFULL 104 /* Exchange full */ +#define ENOANO 105 /* No anode */ +#define EBADRQC 106 /* Invalid request code */ +#define EBADSLT 107 /* Invalid slot */ +#define EDEADLOCK 108 /* File locking deadlock error */ +#define EBFONT 109 /* Bad font file format */ +#define ELIBEXEC 110 /* Cannot exec a shared library directly */ +#define ENODATA 111 /* No data available */ +#define ELIBBAD 112 /* Accessing a corrupted shared library */ +#define ENOPKG 113 /* Package not installed */ +#define ELIBACC 114 /* Can not access a needed shared library */ +#define ENOTUNIQ 115 /* Name not unique on network */ +#define ERESTART 116 /* Interrupted syscall should be restarted */ +#define EUCLEAN 117 /* Structure needs cleaning */ +#define ENOTNAM 118 /* Not a XENIX named type file */ +#define ENAVAIL 119 /* No XENIX semaphores available */ +#define EISNAM 120 /* Is a named type file */ +#define EREMOTEIO 121 /* Remote I/O error */ +#define EILSEQ 122 /* Illegal byte sequence */ +#define ELIBMAX 123 /* Atmpt to link in too many shared libs */ +#define ELIBSCN 124 /* .lib section in a.out corrupted */ + +#define ENOMEDIUM 125 /* No medium found */ +#define EMEDIUMTYPE 126 /* Wrong medium type */ +#define ECANCELED 127 /* Operation Cancelled */ +#define ENOKEY 128 /* Required key not available */ +#define EKEYEXPIRED 129 /* Key has expired */ +#define EKEYREVOKED 130 /* Key has been revoked */ +#define EKEYREJECTED 131 /* Key was rejected by service */ + +#endif diff --git a/include/asm-sparc/fbio.h b/include/asm-sparc/fbio.h new file mode 100644 index 00000000000..c2b27e7a7ca --- /dev/null +++ b/include/asm-sparc/fbio.h @@ -0,0 +1,297 @@ +#ifndef __LINUX_FBIO_H +#define __LINUX_FBIO_H + +/* Constants used for fbio SunOS compatibility */ +/* (C) 1996 Miguel de Icaza */ + +/* Frame buffer types */ +#define FBTYPE_NOTYPE -1 +#define FBTYPE_SUN1BW 0 /* mono */ +#define FBTYPE_SUN1COLOR 1 +#define FBTYPE_SUN2BW 2 +#define FBTYPE_SUN2COLOR 3 +#define FBTYPE_SUN2GP 4 +#define FBTYPE_SUN5COLOR 5 +#define FBTYPE_SUN3COLOR 6 +#define FBTYPE_MEMCOLOR 7 +#define FBTYPE_SUN4COLOR 8 + +#define FBTYPE_NOTSUN1 9 +#define FBTYPE_NOTSUN2 10 +#define FBTYPE_NOTSUN3 11 + +#define FBTYPE_SUNFAST_COLOR 12 /* cg6 */ +#define FBTYPE_SUNROP_COLOR 13 +#define FBTYPE_SUNFB_VIDEO 14 +#define FBTYPE_SUNGIFB 15 +#define FBTYPE_SUNGPLAS 16 +#define FBTYPE_SUNGP3 17 +#define FBTYPE_SUNGT 18 +#define FBTYPE_SUNLEO 19 /* zx Leo card */ +#define FBTYPE_MDICOLOR 20 /* cg14 */ +#define FBTYPE_TCXCOLOR 21 /* SUNW,tcx card */ + +#define FBTYPE_LASTPLUSONE 21 /* This is not last + 1 in fact... */ + +/* Does not seem to be listed in the Sun file either */ +#define FBTYPE_CREATOR 22 +#define FBTYPE_PCI_IGA1682 23 +#define FBTYPE_P9100COLOR 24 + +/* fbio ioctls */ +/* Returned by FBIOGTYPE */ +struct fbtype { + int fb_type; /* fb type, see above */ + int fb_height; /* pixels */ + int fb_width; /* pixels */ + int fb_depth; + int fb_cmsize; /* color map entries */ + int fb_size; /* fb size in bytes */ +}; +#define FBIOGTYPE _IOR('F', 0, struct fbtype) + +struct fbcmap { + int index; /* first element (0 origin) */ + int count; + unsigned char __user *red; + unsigned char __user *green; + unsigned char __user *blue; +}; + +#ifdef __KERNEL__ +#define FBIOPUTCMAP_SPARC _IOW('F', 3, struct fbcmap) +#define FBIOGETCMAP_SPARC _IOW('F', 4, struct fbcmap) +#else +#define FBIOPUTCMAP _IOW('F', 3, struct fbcmap) +#define FBIOGETCMAP _IOW('F', 4, struct fbcmap) +#endif + +/* # of device specific values */ +#define FB_ATTR_NDEVSPECIFIC 8 +/* # of possible emulations */ +#define FB_ATTR_NEMUTYPES 4 + +struct fbsattr { + int flags; + int emu_type; /* -1 if none */ + int dev_specific[FB_ATTR_NDEVSPECIFIC]; +}; + +struct fbgattr { + int real_type; /* real frame buffer type */ + int owner; /* unknown */ + struct fbtype fbtype; /* real frame buffer fbtype */ + struct fbsattr sattr; + int emu_types[FB_ATTR_NEMUTYPES]; /* supported emulations */ +}; +#define FBIOSATTR _IOW('F', 5, struct fbgattr) /* Unsupported: */ +#define FBIOGATTR _IOR('F', 6, struct fbgattr) /* supported */ + +#define FBIOSVIDEO _IOW('F', 7, int) +#define FBIOGVIDEO _IOR('F', 8, int) + +struct fbcursor { + short set; /* what to set, choose from the list above */ + short enable; /* cursor on/off */ + struct fbcurpos pos; /* cursor position */ + struct fbcurpos hot; /* cursor hot spot */ + struct fbcmap cmap; /* color map info */ + struct fbcurpos size; /* cursor bit map size */ + char *image; /* cursor image bits */ + char *mask; /* cursor mask bits */ +}; + +/* set/get cursor attributes/shape */ +#define FBIOSCURSOR _IOW('F', 24, struct fbcursor) +#define FBIOGCURSOR _IOWR('F', 25, struct fbcursor) + +/* set/get cursor position */ +#define FBIOSCURPOS _IOW('F', 26, struct fbcurpos) +#define FBIOGCURPOS _IOW('F', 27, struct fbcurpos) + +/* get max cursor size */ +#define FBIOGCURMAX _IOR('F', 28, struct fbcurpos) + +/* wid manipulation */ +struct fb_wid_alloc { +#define FB_WID_SHARED_8 0 +#define FB_WID_SHARED_24 1 +#define FB_WID_DBL_8 2 +#define FB_WID_DBL_24 3 + __u32 wa_type; + __s32 wa_index; /* Set on return */ + __u32 wa_count; +}; +struct fb_wid_item { + __u32 wi_type; + __s32 wi_index; + __u32 wi_attrs; + __u32 wi_values[32]; +}; +struct fb_wid_list { + __u32 wl_flags; + __u32 wl_count; + struct fb_wid_item *wl_list; +}; + +#define FBIO_WID_ALLOC _IOWR('F', 30, struct fb_wid_alloc) +#define FBIO_WID_FREE _IOW('F', 31, struct fb_wid_alloc) +#define FBIO_WID_PUT _IOW('F', 32, struct fb_wid_list) +#define FBIO_WID_GET _IOWR('F', 33, struct fb_wid_list) + +/* Creator ioctls */ +#define FFB_IOCTL ('F'<<8) +#define FFB_SYS_INFO (FFB_IOCTL|80) +#define FFB_CLUTREAD (FFB_IOCTL|81) +#define FFB_CLUTPOST (FFB_IOCTL|82) +#define FFB_SETDIAGMODE (FFB_IOCTL|83) +#define FFB_GETMONITORID (FFB_IOCTL|84) +#define FFB_GETVIDEOMODE (FFB_IOCTL|85) +#define FFB_SETVIDEOMODE (FFB_IOCTL|86) +#define FFB_SETSERVER (FFB_IOCTL|87) +#define FFB_SETOVCTL (FFB_IOCTL|88) +#define FFB_GETOVCTL (FFB_IOCTL|89) +#define FFB_GETSAXNUM (FFB_IOCTL|90) +#define FFB_FBDEBUG (FFB_IOCTL|91) + +/* Cg14 ioctls */ +#define MDI_IOCTL ('M'<<8) +#define MDI_RESET (MDI_IOCTL|1) +#define MDI_GET_CFGINFO (MDI_IOCTL|2) +#define MDI_SET_PIXELMODE (MDI_IOCTL|3) +# define MDI_32_PIX 32 +# define MDI_16_PIX 16 +# define MDI_8_PIX 8 + +struct mdi_cfginfo { + int mdi_ncluts; /* Number of implemented CLUTs in this MDI */ + int mdi_type; /* FBTYPE name */ + int mdi_height; /* height */ + int mdi_width; /* widht */ + int mdi_size; /* available ram */ + int mdi_mode; /* 8bpp, 16bpp or 32bpp */ + int mdi_pixfreq; /* pixel clock (from PROM) */ +}; + +/* SparcLinux specific ioctl for the MDI, should be replaced for + * the SET_XLUT/SET_CLUTn ioctls instead + */ +#define MDI_CLEAR_XLUT (MDI_IOCTL|9) + +/* leo & ffb ioctls */ +struct fb_clut_alloc { + __u32 clutid; /* Set on return */ + __u32 flag; + __u32 index; +}; + +struct fb_clut { +#define FB_CLUT_WAIT 0x00000001 /* Not yet implemented */ + __u32 flag; + __u32 clutid; + __u32 offset; + __u32 count; + char * red; + char * green; + char * blue; +}; + +struct fb_clut32 { + __u32 flag; + __u32 clutid; + __u32 offset; + __u32 count; + __u32 red; + __u32 green; + __u32 blue; +}; + +#define LEO_CLUTALLOC _IOWR('L', 53, struct fb_clut_alloc) +#define LEO_CLUTFREE _IOW('L', 54, struct fb_clut_alloc) +#define LEO_CLUTREAD _IOW('L', 55, struct fb_clut) +#define LEO_CLUTPOST _IOW('L', 56, struct fb_clut) +#define LEO_SETGAMMA _IOW('L', 68, int) /* Not yet implemented */ +#define LEO_GETGAMMA _IOR('L', 69, int) /* Not yet implemented */ + +#ifdef __KERNEL__ +/* Addresses on the fd of a cgsix that are mappable */ +#define CG6_FBC 0x70000000 +#define CG6_TEC 0x70001000 +#define CG6_BTREGS 0x70002000 +#define CG6_FHC 0x70004000 +#define CG6_THC 0x70005000 +#define CG6_ROM 0x70006000 +#define CG6_RAM 0x70016000 +#define CG6_DHC 0x80000000 + +#define CG3_MMAP_OFFSET 0x4000000 + +/* Addresses on the fd of a tcx that are mappable */ +#define TCX_RAM8BIT 0x00000000 +#define TCX_RAM24BIT 0x01000000 +#define TCX_UNK3 0x10000000 +#define TCX_UNK4 0x20000000 +#define TCX_CONTROLPLANE 0x28000000 +#define TCX_UNK6 0x30000000 +#define TCX_UNK7 0x38000000 +#define TCX_TEC 0x70000000 +#define TCX_BTREGS 0x70002000 +#define TCX_THC 0x70004000 +#define TCX_DHC 0x70008000 +#define TCX_ALT 0x7000a000 +#define TCX_SYNC 0x7000e000 +#define TCX_UNK2 0x70010000 + +/* CG14 definitions */ + +/* Offsets into the OBIO space: */ +#define CG14_REGS 0 /* registers */ +#define CG14_CURSORREGS 0x1000 /* cursor registers */ +#define CG14_DACREGS 0x2000 /* DAC registers */ +#define CG14_XLUT 0x3000 /* X Look Up Table -- ??? */ +#define CG14_CLUT1 0x4000 /* Color Look Up Table */ +#define CG14_CLUT2 0x5000 /* Color Look Up Table */ +#define CG14_CLUT3 0x6000 /* Color Look Up Table */ +#define CG14_AUTO 0xf000 + +#endif /* KERNEL */ + +/* These are exported to userland for applications to use */ +/* Mappable offsets for the cg14: control registers */ +#define MDI_DIRECT_MAP 0x10000000 +#define MDI_CTLREG_MAP 0x20000000 +#define MDI_CURSOR_MAP 0x30000000 +#define MDI_SHDW_VRT_MAP 0x40000000 + +/* Mappable offsets for the cg14: frame buffer resolutions */ +/* 32 bits */ +#define MDI_CHUNKY_XBGR_MAP 0x50000000 +#define MDI_CHUNKY_BGR_MAP 0x60000000 + +/* 16 bits */ +#define MDI_PLANAR_X16_MAP 0x70000000 +#define MDI_PLANAR_C16_MAP 0x80000000 + +/* 8 bit is done as CG3 MMAP offset */ +/* 32 bits, planar */ +#define MDI_PLANAR_X32_MAP 0x90000000 +#define MDI_PLANAR_B32_MAP 0xa0000000 +#define MDI_PLANAR_G32_MAP 0xb0000000 +#define MDI_PLANAR_R32_MAP 0xc0000000 + +/* Mappable offsets on leo */ +#define LEO_SS0_MAP 0x00000000 +#define LEO_LC_SS0_USR_MAP 0x00800000 +#define LEO_LD_SS0_MAP 0x00801000 +#define LEO_LX_CURSOR_MAP 0x00802000 +#define LEO_SS1_MAP 0x00803000 +#define LEO_LC_SS1_USR_MAP 0x01003000 +#define LEO_LD_SS1_MAP 0x01004000 +#define LEO_UNK_MAP 0x01005000 +#define LEO_LX_KRN_MAP 0x01006000 +#define LEO_LC_SS0_KRN_MAP 0x01007000 +#define LEO_LC_SS1_KRN_MAP 0x01008000 +#define LEO_LD_GBL_MAP 0x01009000 +#define LEO_UNK2_MAP 0x0100a000 + +#endif /* __LINUX_FBIO_H */ diff --git a/include/asm-sparc/fcntl.h b/include/asm-sparc/fcntl.h new file mode 100644 index 00000000000..df9c75d41d6 --- /dev/null +++ b/include/asm-sparc/fcntl.h @@ -0,0 +1,89 @@ +/* $Id: fcntl.h,v 1.16 2001/09/20 00:35:33 davem Exp $ */ +#ifndef _SPARC_FCNTL_H +#define _SPARC_FCNTL_H + +/* open/fcntl - O_SYNC is only implemented on blocks devices and on files + located on an ext2 file system */ +#define O_RDONLY 0x0000 +#define O_WRONLY 0x0001 +#define O_RDWR 0x0002 +#define O_ACCMODE 0x0003 +#define O_APPEND 0x0008 +#define FASYNC 0x0040 /* fcntl, for BSD compatibility */ +#define O_CREAT 0x0200 /* not fcntl */ +#define O_TRUNC 0x0400 /* not fcntl */ +#define O_EXCL 0x0800 /* not fcntl */ +#define O_SYNC 0x2000 +#define O_NONBLOCK 0x4000 +#define O_NDELAY (0x0004 | O_NONBLOCK) +#define O_NOCTTY 0x8000 /* not fcntl */ +#define O_DIRECTORY 0x10000 /* must be a directory */ +#define O_NOFOLLOW 0x20000 /* don't follow links */ +#define O_LARGEFILE 0x40000 +#define O_DIRECT 0x100000 /* direct disk access hint */ +#define O_NOATIME 0x200000 + +#define F_DUPFD 0 /* dup */ +#define F_GETFD 1 /* get close_on_exec */ +#define F_SETFD 2 /* set/clear close_on_exec */ +#define F_GETFL 3 /* get file->f_flags */ +#define F_SETFL 4 /* set file->f_flags */ +#define F_GETOWN 5 /* for sockets. */ +#define F_SETOWN 6 /* for sockets. */ +#define F_GETLK 7 +#define F_SETLK 8 +#define F_SETLKW 9 +#define F_SETSIG 10 /* for sockets. */ +#define F_GETSIG 11 /* for sockets. */ + +#define F_GETLK64 12 /* using 'struct flock64' */ +#define F_SETLK64 13 +#define F_SETLKW64 14 + +/* for F_[GET|SET]FL */ +#define FD_CLOEXEC 1 /* actually anything with low bit set goes */ + +/* for posix fcntl() and lockf() */ +#define F_RDLCK 1 +#define F_WRLCK 2 +#define F_UNLCK 3 + +/* for old implementation of bsd flock () */ +#define F_EXLCK 4 /* or 3 */ +#define F_SHLCK 8 /* or 4 */ + +/* for leases */ +#define F_INPROGRESS 16 + +/* operations for bsd flock(), also used by the kernel implementation */ +#define LOCK_SH 1 /* shared lock */ +#define LOCK_EX 2 /* exclusive lock */ +#define LOCK_NB 4 /* or'd with one of the above to prevent + blocking */ +#define LOCK_UN 8 /* remove lock */ + +#define LOCK_MAND 32 /* This is a mandatory flock */ +#define LOCK_READ 64 /* ... Which allows concurrent read operations */ +#define LOCK_WRITE 128 /* ... Which allows concurrent write operations */ +#define LOCK_RW 192 /* ... Which allows concurrent read & write ops */ + +struct flock { + short l_type; + short l_whence; + off_t l_start; + off_t l_len; + pid_t l_pid; + short __unused; +}; + +struct flock64 { + short l_type; + short l_whence; + loff_t l_start; + loff_t l_len; + pid_t l_pid; + short __unused; +}; + +#define F_LINUX_SPECIFIC_BASE 1024 +#endif diff --git a/include/asm-sparc/fixmap.h b/include/asm-sparc/fixmap.h new file mode 100644 index 00000000000..9de52b4d2cf --- /dev/null +++ b/include/asm-sparc/fixmap.h @@ -0,0 +1,111 @@ +/* + * fixmap.h: compile-time virtual memory allocation + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1998 Ingo Molnar + * + * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999 + */ + +#ifndef _ASM_FIXMAP_H +#define _ASM_FIXMAP_H + +#include <linux/config.h> +#include <linux/kernel.h> +#include <asm/page.h> +#ifdef CONFIG_HIGHMEM +#include <linux/threads.h> +#include <asm/kmap_types.h> +#endif + +/* + * Here we define all the compile-time 'special' virtual + * addresses. The point is to have a constant address at + * compile time, but to set the physical address only + * in the boot process. We allocate these special addresses + * from the top of unused virtual memory (0xfd000000 - 1 page) backwards. + * Also this lets us do fail-safe vmalloc(), we + * can guarantee that these special addresses and + * vmalloc()-ed addresses never overlap. + * + * these 'compile-time allocated' memory buffers are + * fixed-size 4k pages. (or larger if used with an increment + * highger than 1) use fixmap_set(idx,phys) to associate + * physical memory with fixmap indices. + * + * TLB entries of such buffers will not be flushed across + * task switches. + */ + +/* + * on UP currently we will have no trace of the fixmap mechanism, + * no page table allocations, etc. This might change in the + * future, say framebuffers for the console driver(s) could be + * fix-mapped? + */ +enum fixed_addresses { + FIX_HOLE, +#ifdef CONFIG_HIGHMEM + FIX_KMAP_BEGIN, + FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1, +#endif + __end_of_fixed_addresses +}; + +extern void __set_fixmap (enum fixed_addresses idx, + unsigned long phys, pgprot_t flags); + +#define set_fixmap(idx, phys) \ + __set_fixmap(idx, phys, PAGE_KERNEL) +/* + * Some hardware wants to get fixmapped without caching. + */ +#define set_fixmap_nocache(idx, phys) \ + __set_fixmap(idx, phys, PAGE_KERNEL_NOCACHE) +/* + * used by vmalloc.c. + * + * Leave one empty page between IO pages at 0xfd000000 and + * the start of the fixmap. + */ +#define FIXADDR_TOP (0xfcfff000UL) +#define FIXADDR_SIZE ((__end_of_fixed_addresses) << PAGE_SHIFT) +#define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE) + +#define __fix_to_virt(x) (FIXADDR_TOP - ((x) << PAGE_SHIFT)) +#define __virt_to_fix(x) ((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT) + +extern void __this_fixmap_does_not_exist(void); + +/* + * 'index to address' translation. If anyone tries to use the idx + * directly without tranlation, we catch the bug with a NULL-deference + * kernel oops. Illegal ranges of incoming indices are caught too. + */ +static inline unsigned long fix_to_virt(const unsigned int idx) +{ + /* + * this branch gets completely eliminated after inlining, + * except when someone tries to use fixaddr indices in an + * illegal way. (such as mixing up address types or using + * out-of-range indices). + * + * If it doesn't get removed, the linker will complain + * loudly with a reasonably clear error message.. + */ + if (idx >= __end_of_fixed_addresses) + __this_fixmap_does_not_exist(); + + return __fix_to_virt(idx); +} + +static inline unsigned long virt_to_fix(const unsigned long vaddr) +{ + BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START); + return __virt_to_fix(vaddr); +} + +#endif diff --git a/include/asm-sparc/floppy.h b/include/asm-sparc/floppy.h new file mode 100644 index 00000000000..780ee7ff9dc --- /dev/null +++ b/include/asm-sparc/floppy.h @@ -0,0 +1,369 @@ +/* asm-sparc/floppy.h: Sparc specific parts of the Floppy driver. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef __ASM_SPARC_FLOPPY_H +#define __ASM_SPARC_FLOPPY_H + +#include <asm/page.h> +#include <asm/pgtable.h> +#include <asm/system.h> +#include <asm/idprom.h> +#include <asm/machines.h> +#include <asm/oplib.h> +#include <asm/auxio.h> +#include <asm/irq.h> + +/* We don't need no stinkin' I/O port allocation crap. */ +#undef release_region +#undef check_region +#undef request_region +#define release_region(X, Y) do { } while(0) +#define check_region(X, Y) (0) +#define request_region(X, Y, Z) (1) + +/* References: + * 1) Netbsd Sun floppy driver. + * 2) NCR 82077 controller manual + * 3) Intel 82077 controller manual + */ +struct sun_flpy_controller { + volatile unsigned char status_82072; /* Main Status reg. */ +#define dcr_82072 status_82072 /* Digital Control reg. */ +#define status1_82077 status_82072 /* Auxiliary Status reg. 1 */ + + volatile unsigned char data_82072; /* Data fifo. */ +#define status2_82077 data_82072 /* Auxiliary Status reg. 2 */ + + volatile unsigned char dor_82077; /* Digital Output reg. */ + volatile unsigned char tapectl_82077; /* What the? Tape control reg? */ + + volatile unsigned char status_82077; /* Main Status Register. */ +#define drs_82077 status_82077 /* Digital Rate Select reg. */ + + volatile unsigned char data_82077; /* Data fifo. */ + volatile unsigned char ___unused; + volatile unsigned char dir_82077; /* Digital Input reg. */ +#define dcr_82077 dir_82077 /* Config Control reg. */ +}; + +/* You'll only ever find one controller on a SparcStation anyways. */ +static struct sun_flpy_controller *sun_fdc = NULL; +volatile unsigned char *fdc_status; + +struct sun_floppy_ops { + unsigned char (*fd_inb)(int port); + void (*fd_outb)(unsigned char value, int port); +}; + +static struct sun_floppy_ops sun_fdops; + +#define fd_inb(port) sun_fdops.fd_inb(port) +#define fd_outb(value,port) sun_fdops.fd_outb(value,port) +#define fd_enable_dma() sun_fd_enable_dma() +#define fd_disable_dma() sun_fd_disable_dma() +#define fd_request_dma() (0) /* nothing... */ +#define fd_free_dma() /* nothing... */ +#define fd_clear_dma_ff() /* nothing... */ +#define fd_set_dma_mode(mode) sun_fd_set_dma_mode(mode) +#define fd_set_dma_addr(addr) sun_fd_set_dma_addr(addr) +#define fd_set_dma_count(count) sun_fd_set_dma_count(count) +#define fd_enable_irq() /* nothing... */ +#define fd_disable_irq() /* nothing... */ +#define fd_cacheflush(addr, size) /* nothing... */ +#define fd_request_irq() sun_fd_request_irq() +#define fd_free_irq() /* nothing... */ +#if 0 /* P3: added by Alain, these cause a MMU corruption. 19960524 XXX */ +#define fd_dma_mem_alloc(size) ((unsigned long) vmalloc(size)) +#define fd_dma_mem_free(addr,size) (vfree((void *)(addr))) +#endif + +#define FLOPPY_MOTOR_MASK 0x10 + +/* XXX This isn't really correct. XXX */ +#define get_dma_residue(x) (0) + +#define FLOPPY0_TYPE 4 +#define FLOPPY1_TYPE 0 + +/* Super paranoid... */ +#undef HAVE_DISABLE_HLT + +/* Here is where we catch the floppy driver trying to initialize, + * therefore this is where we call the PROM device tree probing + * routine etc. on the Sparc. + */ +#define FDC1 sun_floppy_init() + +#define N_FDC 1 +#define N_DRIVE 8 + +/* No 64k boundary crossing problems on the Sparc. */ +#define CROSS_64KB(a,s) (0) + +/* Routines unique to each controller type on a Sun. */ +static unsigned char sun_82072_fd_inb(int port) +{ + udelay(5); + switch(port & 7) { + default: + printk("floppy: Asked to read unknown port %d\n", port); + panic("floppy: Port bolixed."); + case 4: /* FD_STATUS */ + return sun_fdc->status_82072 & ~STATUS_DMA; + case 5: /* FD_DATA */ + return sun_fdc->data_82072; + case 7: /* FD_DIR */ + return (get_auxio() & AUXIO_FLPY_DCHG)? 0x80: 0; + }; + panic("sun_82072_fd_inb: How did I get here?"); +} + +static void sun_82072_fd_outb(unsigned char value, int port) +{ + udelay(5); + switch(port & 7) { + default: + printk("floppy: Asked to write to unknown port %d\n", port); + panic("floppy: Port bolixed."); + case 2: /* FD_DOR */ + /* Oh geese, 82072 on the Sun has no DOR register, + * the functionality is implemented via the AUXIO + * I/O register. So we must emulate the behavior. + * + * ASSUMPTIONS: There will only ever be one floppy + * drive attached to a Sun controller + * and it will be at drive zero. + */ + { + unsigned bits = 0; + if (value & 0x10) bits |= AUXIO_FLPY_DSEL; + if ((value & 0x80) == 0) bits |= AUXIO_FLPY_EJCT; + set_auxio(bits, (~bits) & (AUXIO_FLPY_DSEL|AUXIO_FLPY_EJCT)); + } + break; + case 5: /* FD_DATA */ + sun_fdc->data_82072 = value; + break; + case 7: /* FD_DCR */ + sun_fdc->dcr_82072 = value; + break; + case 4: /* FD_STATUS */ + sun_fdc->status_82072 = value; + break; + }; + return; +} + +static unsigned char sun_82077_fd_inb(int port) +{ + udelay(5); + switch(port & 7) { + default: + printk("floppy: Asked to read unknown port %d\n", port); + panic("floppy: Port bolixed."); + case 4: /* FD_STATUS */ + return sun_fdc->status_82077 & ~STATUS_DMA; + case 5: /* FD_DATA */ + return sun_fdc->data_82077; + case 7: /* FD_DIR */ + /* XXX: Is DCL on 0x80 in sun4m? */ + return sun_fdc->dir_82077; + }; + panic("sun_82072_fd_inb: How did I get here?"); +} + +static void sun_82077_fd_outb(unsigned char value, int port) +{ + udelay(5); + switch(port & 7) { + default: + printk("floppy: Asked to write to unknown port %d\n", port); + panic("floppy: Port bolixed."); + case 2: /* FD_DOR */ + /* Happily, the 82077 has a real DOR register. */ + sun_fdc->dor_82077 = value; + break; + case 5: /* FD_DATA */ + sun_fdc->data_82077 = value; + break; + case 7: /* FD_DCR */ + sun_fdc->dcr_82077 = value; + break; + case 4: /* FD_STATUS */ + sun_fdc->status_82077 = value; + break; + }; + return; +} + +/* For pseudo-dma (Sun floppy drives have no real DMA available to + * them so we must eat the data fifo bytes directly ourselves) we have + * three state variables. doing_pdma tells our inline low-level + * assembly floppy interrupt entry point whether it should sit and eat + * bytes from the fifo or just transfer control up to the higher level + * floppy interrupt c-code. I tried very hard but I could not get the + * pseudo-dma to work in c-code without getting many overruns and + * underruns. If non-zero, doing_pdma encodes the direction of + * the transfer for debugging. 1=read 2=write + */ +char *pdma_vaddr; +unsigned long pdma_size; +volatile int doing_pdma = 0; + +/* This is software state */ +char *pdma_base = NULL; +unsigned long pdma_areasize; + +/* Common routines to all controller types on the Sparc. */ +static __inline__ void virtual_dma_init(void) +{ + /* nothing... */ +} + +static __inline__ void sun_fd_disable_dma(void) +{ + doing_pdma = 0; + if (pdma_base) { + mmu_unlockarea(pdma_base, pdma_areasize); + pdma_base = 0; + } +} + +static __inline__ void sun_fd_set_dma_mode(int mode) +{ + switch(mode) { + case DMA_MODE_READ: + doing_pdma = 1; + break; + case DMA_MODE_WRITE: + doing_pdma = 2; + break; + default: + printk("Unknown dma mode %d\n", mode); + panic("floppy: Giving up..."); + } +} + +static __inline__ void sun_fd_set_dma_addr(char *buffer) +{ + pdma_vaddr = buffer; +} + +static __inline__ void sun_fd_set_dma_count(int length) +{ + pdma_size = length; +} + +static __inline__ void sun_fd_enable_dma(void) +{ + pdma_vaddr = mmu_lockarea(pdma_vaddr, pdma_size); + pdma_base = pdma_vaddr; + pdma_areasize = pdma_size; +} + +/* Our low-level entry point in arch/sparc/kernel/entry.S */ +irqreturn_t floppy_hardint(int irq, void *unused, struct pt_regs *regs); + +static int sun_fd_request_irq(void) +{ + static int once = 0; + int error; + + if(!once) { + once = 1; + error = request_fast_irq(FLOPPY_IRQ, floppy_hardint, SA_INTERRUPT, "floppy"); + return ((error == 0) ? 0 : -1); + } else return 0; +} + +static struct linux_prom_registers fd_regs[2]; + +static int sun_floppy_init(void) +{ + char state[128]; + int tnode, fd_node, num_regs; + struct resource r; + + use_virtual_dma = 1; + + FLOPPY_IRQ = 11; + /* Forget it if we aren't on a machine that could possibly + * ever have a floppy drive. + */ + if((sparc_cpu_model != sun4c && sparc_cpu_model != sun4m) || + ((idprom->id_machtype == (SM_SUN4C | SM_4C_SLC)) || + (idprom->id_machtype == (SM_SUN4C | SM_4C_ELC)))) { + /* We certainly don't have a floppy controller. */ + goto no_sun_fdc; + } + /* Well, try to find one. */ + tnode = prom_getchild(prom_root_node); + fd_node = prom_searchsiblings(tnode, "obio"); + if(fd_node != 0) { + tnode = prom_getchild(fd_node); + fd_node = prom_searchsiblings(tnode, "SUNW,fdtwo"); + } else { + fd_node = prom_searchsiblings(tnode, "fd"); + } + if(fd_node == 0) { + goto no_sun_fdc; + } + + /* The sun4m lets us know if the controller is actually usable. */ + if(sparc_cpu_model == sun4m && + prom_getproperty(fd_node, "status", state, sizeof(state)) != -1) { + if(!strcmp(state, "disabled")) { + goto no_sun_fdc; + } + } + num_regs = prom_getproperty(fd_node, "reg", (char *) fd_regs, sizeof(fd_regs)); + num_regs = (num_regs / sizeof(fd_regs[0])); + prom_apply_obio_ranges(fd_regs, num_regs); + memset(&r, 0, sizeof(r)); + r.flags = fd_regs[0].which_io; + r.start = fd_regs[0].phys_addr; + sun_fdc = (struct sun_flpy_controller *) + sbus_ioremap(&r, 0, fd_regs[0].reg_size, "floppy"); + + /* Last minute sanity check... */ + if(sun_fdc->status_82072 == 0xff) { + sun_fdc = NULL; + goto no_sun_fdc; + } + + if(sparc_cpu_model == sun4c) { + sun_fdops.fd_inb = sun_82072_fd_inb; + sun_fdops.fd_outb = sun_82072_fd_outb; + fdc_status = &sun_fdc->status_82072; + /* printk("AUXIO @0x%lx\n", auxio_register); */ /* P3 */ + } else { + sun_fdops.fd_inb = sun_82077_fd_inb; + sun_fdops.fd_outb = sun_82077_fd_outb; + fdc_status = &sun_fdc->status_82077; + /* printk("DOR @0x%p\n", &sun_fdc->dor_82077); */ /* P3 */ + } + + /* Success... */ + allowed_drive_mask = 0x01; + return (int) sun_fdc; + +no_sun_fdc: + return -1; +} + +static int sparc_eject(void) +{ + set_dor(0x00, 0xff, 0x90); + udelay(500); + set_dor(0x00, 0x6f, 0x00); + udelay(500); + return 0; +} + +#define fd_eject(drive) sparc_eject() + +#define EXTRA_FLOPPY_PARAMS + +#endif /* !(__ASM_SPARC_FLOPPY_H) */ diff --git a/include/asm-sparc/hardirq.h b/include/asm-sparc/hardirq.h new file mode 100644 index 00000000000..2a668c479f6 --- /dev/null +++ b/include/asm-sparc/hardirq.h @@ -0,0 +1,24 @@ +/* hardirq.h: 32-bit Sparc hard IRQ support. + * + * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu) + * Copyright (C) 1998-2000 Anton Blanchard (anton@samba.org) + */ + +#ifndef __SPARC_HARDIRQ_H +#define __SPARC_HARDIRQ_H + +#include <linux/config.h> +#include <linux/threads.h> +#include <linux/spinlock.h> +#include <linux/cache.h> + +/* entry.S is sensitive to the offsets of these fields */ /* XXX P3 Is it? */ +typedef struct { + unsigned int __softirq_pending; +} ____cacheline_aligned irq_cpustat_t; + +#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */ + +#define HARDIRQ_BITS 8 + +#endif /* __SPARC_HARDIRQ_H */ diff --git a/include/asm-sparc/hdreg.h b/include/asm-sparc/hdreg.h new file mode 100644 index 00000000000..7f7fd1af0af --- /dev/null +++ b/include/asm-sparc/hdreg.h @@ -0,0 +1 @@ +#include <asm-generic/hdreg.h> diff --git a/include/asm-sparc/head.h b/include/asm-sparc/head.h new file mode 100644 index 00000000000..1a03c28da92 --- /dev/null +++ b/include/asm-sparc/head.h @@ -0,0 +1,125 @@ +/* $Id: head.h,v 1.39 2000/05/26 22:18:45 ecd Exp $ */ +#ifndef __SPARC_HEAD_H +#define __SPARC_HEAD_H + +#define KERNBASE 0xf0000000 /* First address the kernel will eventually be */ +#define LOAD_ADDR 0x4000 /* prom jumps to us here unless this is elf /boot */ +#define SUN4C_SEGSZ (1 << 18) +#define SRMMU_L1_KBASE_OFFSET ((KERNBASE>>24)<<2) /* Used in boot remapping. */ +#define INTS_ENAB 0x01 /* entry.S uses this. */ + +#define SUN4_PROM_VECTOR 0xFFE81000 /* SUN4 PROM needs to be hardwired */ + +#define WRITE_PAUSE nop; nop; nop; /* Have to do this after %wim/%psr chg */ +#define NOP_INSN 0x01000000 /* Used to patch sparc_save_state */ + +/* Here are some trap goodies */ + +/* Generic trap entry. */ +#define TRAP_ENTRY(type, label) \ + rd %psr, %l0; b label; rd %wim, %l3; nop; + +/* Data/text faults. Defaults to sun4c version at boot time. */ +#define SPARC_TFAULT rd %psr, %l0; rd %wim, %l3; b sun4c_fault; mov 1, %l7; +#define SPARC_DFAULT rd %psr, %l0; rd %wim, %l3; b sun4c_fault; mov 0, %l7; +#define SRMMU_TFAULT rd %psr, %l0; rd %wim, %l3; b srmmu_fault; mov 1, %l7; +#define SRMMU_DFAULT rd %psr, %l0; rd %wim, %l3; b srmmu_fault; mov 0, %l7; + +/* This is for traps we should NEVER get. */ +#define BAD_TRAP(num) \ + rd %psr, %l0; mov num, %l7; b bad_trap_handler; rd %wim, %l3; + +/* This is for traps when we want just skip the instruction which caused it */ +#define SKIP_TRAP(type, name) \ + jmpl %l2, %g0; rett %l2 + 4; nop; nop; + +/* Notice that for the system calls we pull a trick. We load up a + * different pointer to the system call vector table in %l7, but call + * the same generic system call low-level entry point. The trap table + * entry sequences are also HyperSparc pipeline friendly ;-) + */ + +/* Software trap for Linux system calls. */ +#define LINUX_SYSCALL_TRAP \ + sethi %hi(sys_call_table), %l7; \ + or %l7, %lo(sys_call_table), %l7; \ + b linux_sparc_syscall; \ + rd %psr, %l0; + +/* Software trap for SunOS4.1.x system calls. */ +#define SUNOS_SYSCALL_TRAP \ + rd %psr, %l0; \ + sethi %hi(sunos_sys_table), %l7; \ + b linux_sparc_syscall; \ + or %l7, %lo(sunos_sys_table), %l7; + +#define SUNOS_NO_SYSCALL_TRAP \ + b sunos_syscall; \ + rd %psr, %l0; \ + nop; \ + nop; + +/* Software trap for Slowaris system calls. */ +#define SOLARIS_SYSCALL_TRAP \ + b solaris_syscall; \ + rd %psr, %l0; \ + nop; \ + nop; + +#define INDIRECT_SOLARIS_SYSCALL(x) \ + mov x, %g1; \ + b solaris_syscall; \ + rd %psr, %l0; \ + nop; + +#define BREAKPOINT_TRAP \ + b breakpoint_trap; \ + rd %psr,%l0; \ + nop; \ + nop; + +/* Software trap for Sparc-netbsd system calls. */ +#define NETBSD_SYSCALL_TRAP \ + sethi %hi(sys_call_table), %l7; \ + or %l7, %lo(sys_call_table), %l7; \ + b bsd_syscall; \ + rd %psr, %l0; + +/* The Get Condition Codes software trap for userland. */ +#define GETCC_TRAP \ + b getcc_trap_handler; mov %psr, %l0; nop; nop; + +/* The Set Condition Codes software trap for userland. */ +#define SETCC_TRAP \ + b setcc_trap_handler; mov %psr, %l0; nop; nop; + +/* The Get PSR software trap for userland. */ +#define GETPSR_TRAP \ + mov %psr, %i0; jmp %l2; rett %l2 + 4; nop; + +/* This is for hard interrupts from level 1-14, 15 is non-maskable (nmi) and + * gets handled with another macro. + */ +#define TRAP_ENTRY_INTERRUPT(int_level) \ + mov int_level, %l7; rd %psr, %l0; b real_irq_entry; rd %wim, %l3; + +/* NMI's (Non Maskable Interrupts) are special, you can't keep them + * from coming in, and basically if you get one, the shows over. ;( + * On the sun4c they are usually asynchronous memory errors, on the + * the sun4m they could be either due to mem errors or a software + * initiated interrupt from the prom/kern on an SMP box saying "I + * command you to do CPU tricks, read your mailbox for more info." + */ +#define NMI_TRAP \ + rd %wim, %l3; b linux_trap_nmi_sun4c; mov %psr, %l0; nop; + +/* Window overflows/underflows are special and we need to try to be as + * efficient as possible here.... + */ +#define WINDOW_SPILL \ + rd %psr, %l0; rd %wim, %l3; b spill_window_entry; andcc %l0, PSR_PS, %g0; + +#define WINDOW_FILL \ + rd %psr, %l0; rd %wim, %l3; b fill_window_entry; andcc %l0, PSR_PS, %g0; + +#endif /* __SPARC_HEAD_H */ diff --git a/include/asm-sparc/highmem.h b/include/asm-sparc/highmem.h new file mode 100644 index 00000000000..3de42e77627 --- /dev/null +++ b/include/asm-sparc/highmem.h @@ -0,0 +1,81 @@ +/* + * highmem.h: virtual kernel memory mappings for high memory + * + * Used in CONFIG_HIGHMEM systems for memory pages which + * are not addressable by direct kernel virtual addresses. + * + * Copyright (C) 1999 Gerhard Wichert, Siemens AG + * Gerhard.Wichert@pdb.siemens.de + * + * + * Redesigned the x86 32-bit VM architecture to deal with + * up to 16 Terrabyte physical memory. With current x86 CPUs + * we now support up to 64 Gigabytes physical RAM. + * + * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com> + */ + +#ifndef _ASM_HIGHMEM_H +#define _ASM_HIGHMEM_H + +#ifdef __KERNEL__ + +#include <linux/interrupt.h> +#include <asm/fixmap.h> +#include <asm/vaddrs.h> +#include <asm/kmap_types.h> +#include <asm/pgtable.h> + +/* declarations for highmem.c */ +extern unsigned long highstart_pfn, highend_pfn; + +extern pte_t *kmap_pte; +extern pgprot_t kmap_prot; +extern pte_t *pkmap_page_table; + +extern void kmap_init(void) __init; + +/* + * Right now we initialize only a single pte table. It can be extended + * easily, subsequent pte tables have to be allocated in one physical + * chunk of RAM. Currently the simplest way to do this is to align the + * pkmap region on a pagetable boundary (4MB). + */ +#define LAST_PKMAP 1024 +#define PKMAP_SIZE (LAST_PKMAP << PAGE_SHIFT) +#define PKMAP_BASE PMD_ALIGN(SRMMU_NOCACHE_VADDR + (SRMMU_MAX_NOCACHE_PAGES << PAGE_SHIFT)) + +#define LAST_PKMAP_MASK (LAST_PKMAP - 1) +#define PKMAP_NR(virt) ((virt - PKMAP_BASE) >> PAGE_SHIFT) +#define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT)) + +#define PKMAP_END (PKMAP_ADDR(LAST_PKMAP)) + +extern void *kmap_high(struct page *page); +extern void kunmap_high(struct page *page); + +static inline void *kmap(struct page *page) +{ + BUG_ON(in_interrupt()); + if (!PageHighMem(page)) + return page_address(page); + return kmap_high(page); +} + +static inline void kunmap(struct page *page) +{ + BUG_ON(in_interrupt()); + if (!PageHighMem(page)) + return; + kunmap_high(page); +} + +extern void *kmap_atomic(struct page *page, enum km_type type); +extern void kunmap_atomic(void *kvaddr, enum km_type type); +extern struct page *kmap_atomic_to_page(void *vaddr); + +#define flush_cache_kmaps() flush_cache_all() + +#endif /* __KERNEL__ */ + +#endif /* _ASM_HIGHMEM_H */ diff --git a/include/asm-sparc/hw_irq.h b/include/asm-sparc/hw_irq.h new file mode 100644 index 00000000000..8d30a7694be --- /dev/null +++ b/include/asm-sparc/hw_irq.h @@ -0,0 +1,6 @@ +#ifndef __ASM_SPARC_HW_IRQ_H +#define __ASM_SPARC_HW_IRQ_H + +/* Dummy include. */ + +#endif diff --git a/include/asm-sparc/ide.h b/include/asm-sparc/ide.h new file mode 100644 index 00000000000..64d810385ea --- /dev/null +++ b/include/asm-sparc/ide.h @@ -0,0 +1,100 @@ +/* $Id: ide.h,v 1.7 2002/01/16 20:58:40 davem Exp $ + * ide.h: SPARC PCI specific IDE glue. + * + * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu) + * Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be) + * Adaptation from sparc64 version to sparc by Pete Zaitcev. + */ + +#ifndef _SPARC_IDE_H +#define _SPARC_IDE_H + +#ifdef __KERNEL__ + +#include <linux/config.h> +#include <asm/pgtable.h> +#include <asm/io.h> +#include <asm/psr.h> + +#undef MAX_HWIFS +#define MAX_HWIFS 2 + +#define IDE_ARCH_OBSOLETE_INIT +#define ide_default_io_ctl(base) ((base) + 0x206) /* obsolete */ + +#define __ide_insl(data_reg, buffer, wcount) \ + __ide_insw(data_reg, buffer, (wcount)<<1) +#define __ide_outsl(data_reg, buffer, wcount) \ + __ide_outsw(data_reg, buffer, (wcount)<<1) + +/* On sparc, I/O ports and MMIO registers are accessed identically. */ +#define __ide_mm_insw __ide_insw +#define __ide_mm_insl __ide_insl +#define __ide_mm_outsw __ide_outsw +#define __ide_mm_outsl __ide_outsl + +static __inline__ void __ide_insw(unsigned long port, + void *dst, + unsigned long count) +{ + volatile unsigned short *data_port; + /* unsigned long end = (unsigned long)dst + (count << 1); */ /* P3 */ + u16 *ps = dst; + u32 *pi; + + data_port = (volatile unsigned short *)port; + + if(((unsigned long)ps) & 0x2) { + *ps++ = *data_port; + count--; + } + pi = (u32 *)ps; + while(count >= 2) { + u32 w; + + w = (*data_port) << 16; + w |= (*data_port); + *pi++ = w; + count -= 2; + } + ps = (u16 *)pi; + if(count) + *ps++ = *data_port; + + /* __flush_dcache_range((unsigned long)dst, end); */ /* P3 see hme */ +} + +static __inline__ void __ide_outsw(unsigned long port, + const void *src, + unsigned long count) +{ + volatile unsigned short *data_port; + /* unsigned long end = (unsigned long)src + (count << 1); */ + const u16 *ps = src; + const u32 *pi; + + data_port = (volatile unsigned short *)port; + + if(((unsigned long)src) & 0x2) { + *data_port = *ps++; + count--; + } + pi = (const u32 *)ps; + while(count >= 2) { + u32 w; + + w = *pi++; + *data_port = (w >> 16); + *data_port = w; + count -= 2; + } + ps = (const u16 *)pi; + if(count) + *data_port = *ps; + + /* __flush_dcache_range((unsigned long)src, end); */ /* P3 see hme */ +} + +#endif /* __KERNEL__ */ + +#endif /* _SPARC_IDE_H */ diff --git a/include/asm-sparc/idprom.h b/include/asm-sparc/idprom.h new file mode 100644 index 00000000000..d856e640acd --- /dev/null +++ b/include/asm-sparc/idprom.h @@ -0,0 +1,33 @@ +/* $Id: idprom.h,v 1.6 1996/08/04 10:35:07 ecd Exp $ + * idprom.h: Macros and defines for idprom routines + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef _SPARC_IDPROM_H +#define _SPARC_IDPROM_H + +/* Offset into the EEPROM where the id PROM is located on the 4c */ +#define IDPROM_OFFSET 0x7d8 + +/* On sun4m; physical. */ +/* MicroSPARC(-II) does not decode 31rd bit, but it works. */ +#define IDPROM_OFFSET_M 0xfd8 + +struct idprom +{ + unsigned char id_format; /* Format identifier (always 0x01) */ + unsigned char id_machtype; /* Machine type */ + unsigned char id_ethaddr[6]; /* Hardware ethernet address */ + long id_date; /* Date of manufacture */ + unsigned int id_sernum:24; /* Unique serial number */ + unsigned char id_cksum; /* Checksum - xor of the data bytes */ + unsigned char reserved[16]; +}; + +extern struct idprom *idprom; +extern void idprom_init(void); + +#define IDPROM_SIZE (sizeof(struct idprom)) + +#endif /* !(_SPARC_IDPROM_H) */ diff --git a/include/asm-sparc/io-unit.h b/include/asm-sparc/io-unit.h new file mode 100644 index 00000000000..96823b47fd4 --- /dev/null +++ b/include/asm-sparc/io-unit.h @@ -0,0 +1,62 @@ +/* io-unit.h: Definitions for the sun4d IO-UNIT. + * + * Copyright (C) 1997,1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz) + */ +#ifndef _SPARC_IO_UNIT_H +#define _SPARC_IO_UNIT_H + +#include <linux/spinlock.h> +#include <asm/page.h> +#include <asm/pgtable.h> + +/* The io-unit handles all virtual to physical address translations + * that occur between the SBUS and physical memory. Access by + * the cpu to IO registers and similar go over the xdbus so are + * translated by the on chip SRMMU. The io-unit and the srmmu do + * not need to have the same translations at all, in fact most + * of the time the translations they handle are a disjunct set. + * Basically the io-unit handles all dvma sbus activity. + */ + +/* AIEEE, unlike the nice sun4m, these monsters have + fixed DMA range 64M */ + +#define IOUNIT_DMA_BASE 0xfc000000 /* TOP - 64M */ +#define IOUNIT_DMA_SIZE 0x04000000 /* 64M */ +/* We use last 1M for sparc_dvma_malloc */ +#define IOUNIT_DVMA_SIZE 0x00100000 /* 1M */ + +/* The format of an iopte in the external page tables */ +#define IOUPTE_PAGE 0xffffff00 /* Physical page number (PA[35:12]) */ +#define IOUPTE_CACHE 0x00000080 /* Cached (in Viking/MXCC) */ +/* XXX Jakub, find out how to program SBUS streaming cache on XDBUS/sun4d. + * XXX Actually, all you should need to do is find out where the registers + * XXX are and copy over the sparc64 implementation I wrote. There may be + * XXX some horrible hwbugs though, so be careful. -DaveM + */ +#define IOUPTE_STREAM 0x00000040 /* Translation can use streaming cache */ +#define IOUPTE_INTRA 0x00000008 /* SBUS direct slot->slot transfer */ +#define IOUPTE_WRITE 0x00000004 /* Writeable */ +#define IOUPTE_VALID 0x00000002 /* IOPTE is valid */ +#define IOUPTE_PARITY 0x00000001 /* Parity is checked during DVMA */ + +struct iounit_struct { + unsigned long bmap[(IOUNIT_DMA_SIZE >> (PAGE_SHIFT + 3)) / sizeof(unsigned long)]; + spinlock_t lock; + iopte_t *page_table; + unsigned long rotor[3]; + unsigned long limit[4]; +}; + +#define IOUNIT_BMAP1_START 0x00000000 +#define IOUNIT_BMAP1_END (IOUNIT_DMA_SIZE >> (PAGE_SHIFT + 1)) +#define IOUNIT_BMAP2_START IOUNIT_BMAP1_END +#define IOUNIT_BMAP2_END IOUNIT_BMAP2_START + (IOUNIT_DMA_SIZE >> (PAGE_SHIFT + 2)) +#define IOUNIT_BMAPM_START IOUNIT_BMAP2_END +#define IOUNIT_BMAPM_END ((IOUNIT_DMA_SIZE - IOUNIT_DVMA_SIZE) >> PAGE_SHIFT) + +extern __u32 iounit_map_dma_init(struct sbus_bus *, int); +#define iounit_map_dma_finish(sbus, addr, len) mmu_release_scsi_one(addr, len, sbus) +extern __u32 iounit_map_dma_page(__u32, void *, struct sbus_bus *); + +#endif /* !(_SPARC_IO_UNIT_H) */ diff --git a/include/asm-sparc/io.h b/include/asm-sparc/io.h new file mode 100644 index 00000000000..a42df208d59 --- /dev/null +++ b/include/asm-sparc/io.h @@ -0,0 +1,290 @@ +/* + * $Id: io.h,v 1.30 2001/12/21 01:23:21 davem Exp $ + */ +#ifndef __SPARC_IO_H +#define __SPARC_IO_H + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/ioport.h> /* struct resource */ + +#include <asm/page.h> /* IO address mapping routines need this */ +#include <asm/system.h> + +#define page_to_phys(page) (((page) - mem_map) << PAGE_SHIFT) + +static inline u32 flip_dword (u32 l) +{ + return ((l&0xff)<<24) | (((l>>8)&0xff)<<16) | (((l>>16)&0xff)<<8)| ((l>>24)&0xff); +} + +static inline u16 flip_word (u16 w) +{ + return ((w&0xff) << 8) | ((w>>8)&0xff); +} + +#define mmiowb() + +/* + * Memory mapped I/O to PCI + */ + +static inline u8 __raw_readb(const volatile void __iomem *addr) +{ + return *(__force volatile u8 *)addr; +} + +static inline u16 __raw_readw(const volatile void __iomem *addr) +{ + return *(__force volatile u16 *)addr; +} + +static inline u32 __raw_readl(const volatile void __iomem *addr) +{ + return *(__force volatile u32 *)addr; +} + +static inline void __raw_writeb(u8 b, volatile void __iomem *addr) +{ + *(__force volatile u8 *)addr = b; +} + +static inline void __raw_writew(u16 w, volatile void __iomem *addr) +{ + *(__force volatile u16 *)addr = w; +} + +static inline void __raw_writel(u32 l, volatile void __iomem *addr) +{ + *(__force volatile u32 *)addr = l; +} + +static inline u8 __readb(const volatile void __iomem *addr) +{ + return *(__force volatile u8 *)addr; +} + +static inline u16 __readw(const volatile void __iomem *addr) +{ + return flip_word(*(__force volatile u16 *)addr); +} + +static inline u32 __readl(const volatile void __iomem *addr) +{ + return flip_dword(*(__force volatile u32 *)addr); +} + +static inline void __writeb(u8 b, volatile void __iomem *addr) +{ + *(__force volatile u8 *)addr = b; +} + +static inline void __writew(u16 w, volatile void __iomem *addr) +{ + *(__force volatile u16 *)addr = flip_word(w); +} + +static inline void __writel(u32 l, volatile void __iomem *addr) +{ + *(__force volatile u32 *)addr = flip_dword(l); +} + +#define readb(__addr) __readb(__addr) +#define readw(__addr) __readw(__addr) +#define readl(__addr) __readl(__addr) +#define readb_relaxed(__addr) readb(__addr) +#define readw_relaxed(__addr) readw(__addr) +#define readl_relaxed(__addr) readl(__addr) + +#define writeb(__b, __addr) __writeb((__b),(__addr)) +#define writew(__w, __addr) __writew((__w),(__addr)) +#define writel(__l, __addr) __writel((__l),(__addr)) + +/* + * I/O space operations + * + * Arrangement on a Sun is somewhat complicated. + * + * First of all, we want to use standard Linux drivers + * for keyboard, PC serial, etc. These drivers think + * they access I/O space and use inb/outb. + * On the other hand, EBus bridge accepts PCI *memory* + * cycles and converts them into ISA *I/O* cycles. + * Ergo, we want inb & outb to generate PCI memory cycles. + * + * If we want to issue PCI *I/O* cycles, we do this + * with a low 64K fixed window in PCIC. This window gets + * mapped somewhere into virtual kernel space and we + * can use inb/outb again. + */ +#define inb_local(__addr) __readb((void __iomem *)(unsigned long)(__addr)) +#define inb(__addr) __readb((void __iomem *)(unsigned long)(__addr)) +#define inw(__addr) __readw((void __iomem *)(unsigned long)(__addr)) +#define inl(__addr) __readl((void __iomem *)(unsigned long)(__addr)) + +#define outb_local(__b, __addr) __writeb(__b, (void __iomem *)(unsigned long)(__addr)) +#define outb(__b, __addr) __writeb(__b, (void __iomem *)(unsigned long)(__addr)) +#define outw(__w, __addr) __writew(__w, (void __iomem *)(unsigned long)(__addr)) +#define outl(__l, __addr) __writel(__l, (void __iomem *)(unsigned long)(__addr)) + +#define inb_p(__addr) inb(__addr) +#define outb_p(__b, __addr) outb(__b, __addr) +#define inw_p(__addr) inw(__addr) +#define outw_p(__w, __addr) outw(__w, __addr) +#define inl_p(__addr) inl(__addr) +#define outl_p(__l, __addr) outl(__l, __addr) + +void outsb(unsigned long addr, const void *src, unsigned long cnt); +void outsw(unsigned long addr, const void *src, unsigned long cnt); +void outsl(unsigned long addr, const void *src, unsigned long cnt); +void insb(unsigned long addr, void *dst, unsigned long count); +void insw(unsigned long addr, void *dst, unsigned long count); +void insl(unsigned long addr, void *dst, unsigned long count); + +#define IO_SPACE_LIMIT 0xffffffff + +/* + * SBus accessors. + * + * SBus has only one, memory mapped, I/O space. + * We do not need to flip bytes for SBus of course. + */ +static inline u8 _sbus_readb(const volatile void __iomem *addr) +{ + return *(__force volatile u8 *)addr; +} + +static inline u16 _sbus_readw(const volatile void __iomem *addr) +{ + return *(__force volatile u16 *)addr; +} + +static inline u32 _sbus_readl(const volatile void __iomem *addr) +{ + return *(__force volatile u32 *)addr; +} + +static inline void _sbus_writeb(u8 b, volatile void __iomem *addr) +{ + *(__force volatile u8 *)addr = b; +} + +static inline void _sbus_writew(u16 w, volatile void __iomem *addr) +{ + *(__force volatile u16 *)addr = w; +} + +static inline void _sbus_writel(u32 l, volatile void __iomem *addr) +{ + *(__force volatile u32 *)addr = l; +} + +/* + * The only reason for #define's is to hide casts to unsigned long. + */ +#define sbus_readb(__addr) _sbus_readb(__addr) +#define sbus_readw(__addr) _sbus_readw(__addr) +#define sbus_readl(__addr) _sbus_readl(__addr) +#define sbus_writeb(__b, __addr) _sbus_writeb(__b, __addr) +#define sbus_writew(__w, __addr) _sbus_writew(__w, __addr) +#define sbus_writel(__l, __addr) _sbus_writel(__l, __addr) + +static inline void sbus_memset_io(volatile void __iomem *__dst, int c, __kernel_size_t n) +{ + while(n--) { + sbus_writeb(c, __dst); + __dst++; + } +} + +static inline void +_memset_io(volatile void __iomem *dst, int c, __kernel_size_t n) +{ + volatile void __iomem *d = dst; + + while (n--) { + writeb(c, d); + d++; + } +} + +#define memset_io(d,c,sz) _memset_io(d,c,sz) + +static inline void +_memcpy_fromio(void *dst, const volatile void __iomem *src, __kernel_size_t n) +{ + char *d = dst; + + while (n--) { + char tmp = readb(src); + *d++ = tmp; + src++; + } +} + +#define memcpy_fromio(d,s,sz) _memcpy_fromio(d,s,sz) + +static inline void +_memcpy_toio(volatile void __iomem *dst, const void *src, __kernel_size_t n) +{ + const char *s = src; + volatile void __iomem *d = dst; + + while (n--) { + char tmp = *s++; + writeb(tmp, d); + d++; + } +} + +#define memcpy_toio(d,s,sz) _memcpy_toio(d,s,sz) + +#ifdef __KERNEL__ + +/* + * Bus number may be embedded in the higher bits of the physical address. + * This is why we have no bus number argument to ioremap(). + */ +extern void __iomem *ioremap(unsigned long offset, unsigned long size); +#define ioremap_nocache(X,Y) ioremap((X),(Y)) +extern void iounmap(volatile void __iomem *addr); + +/* + * Bus number may be in res->flags... somewhere. + */ +extern void __iomem *sbus_ioremap(struct resource *res, unsigned long offset, + unsigned long size, char *name); +extern void sbus_iounmap(volatile void __iomem *vaddr, unsigned long size); + + +/* + * At the moment, we do not use CMOS_READ anywhere outside of rtc.c, + * so rtc_port is static in it. This should not change unless a new + * hardware pops up. + */ +#define RTC_PORT(x) (rtc_port + (x)) +#define RTC_ALWAYS_BCD 0 + +/* Nothing to do */ +/* P3: Only IDE DMA may need these. XXX Verify that it still does... */ + +#define dma_cache_inv(_start,_size) do { } while (0) +#define dma_cache_wback(_start,_size) do { } while (0) +#define dma_cache_wback_inv(_start,_size) do { } while (0) + +#endif + +#define __ARCH_HAS_NO_PAGE_ZERO_MAPPED 1 + +/* + * Convert a physical pointer to a virtual kernel pointer for /dev/mem + * access + */ +#define xlate_dev_mem_ptr(p) __va(p) + +/* + * Convert a virtual cached pointer to an uncached pointer + */ +#define xlate_dev_kmem_ptr(p) p + +#endif /* !(__SPARC_IO_H) */ diff --git a/include/asm-sparc/ioctl.h b/include/asm-sparc/ioctl.h new file mode 100644 index 00000000000..e6fc4de1994 --- /dev/null +++ b/include/asm-sparc/ioctl.h @@ -0,0 +1,68 @@ +/* $Id: ioctl.h,v 1.6 1999/12/01 23:58:36 davem Exp $ */ +#ifndef _SPARC_IOCTL_H +#define _SPARC_IOCTL_H + +/* + * Our DIR and SIZE overlap in order to simulteneously provide + * a non-zero _IOC_NONE (for binary compatibility) and + * 14 bits of size as on i386. Here's the layout: + * + * 0xE0000000 DIR + * 0x80000000 DIR = WRITE + * 0x40000000 DIR = READ + * 0x20000000 DIR = NONE + * 0x3FFF0000 SIZE (overlaps NONE bit) + * 0x0000FF00 TYPE + * 0x000000FF NR (CMD) + */ + +#define _IOC_NRBITS 8 +#define _IOC_TYPEBITS 8 +#define _IOC_SIZEBITS 13 /* Actually 14, see below. */ +#define _IOC_DIRBITS 3 + +#define _IOC_NRMASK ((1 << _IOC_NRBITS)-1) +#define _IOC_TYPEMASK ((1 << _IOC_TYPEBITS)-1) +#define _IOC_SIZEMASK ((1 << _IOC_SIZEBITS)-1) +#define _IOC_XSIZEMASK ((1 << (_IOC_SIZEBITS+1))-1) +#define _IOC_DIRMASK ((1 << _IOC_DIRBITS)-1) + +#define _IOC_NRSHIFT 0 +#define _IOC_TYPESHIFT (_IOC_NRSHIFT + _IOC_NRBITS) +#define _IOC_SIZESHIFT (_IOC_TYPESHIFT + _IOC_TYPEBITS) +#define _IOC_DIRSHIFT (_IOC_SIZESHIFT + _IOC_SIZEBITS) + +#define _IOC_NONE 1U +#define _IOC_READ 2U +#define _IOC_WRITE 4U + +#define _IOC(dir,type,nr,size) \ + (((dir) << _IOC_DIRSHIFT) | \ + ((type) << _IOC_TYPESHIFT) | \ + ((nr) << _IOC_NRSHIFT) | \ + ((size) << _IOC_SIZESHIFT)) + +#define _IO(type,nr) _IOC(_IOC_NONE,(type),(nr),0) +#define _IOR(type,nr,size) _IOC(_IOC_READ,(type),(nr),sizeof(size)) +#define _IOW(type,nr,size) _IOC(_IOC_WRITE,(type),(nr),sizeof(size)) +#define _IOWR(type,nr,size) _IOC(_IOC_READ|_IOC_WRITE,(type),(nr),sizeof(size)) + +/* Used to decode ioctl numbers in drivers despite the leading underscore... */ +#define _IOC_DIR(nr) \ + ( (((((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK) & (_IOC_WRITE|_IOC_READ)) != 0)? \ + (((nr) >> _IOC_DIRSHIFT) & (_IOC_WRITE|_IOC_READ)): \ + (((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK) ) +#define _IOC_TYPE(nr) (((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK) +#define _IOC_NR(nr) (((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK) +#define _IOC_SIZE(nr) \ + ((((((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK) & (_IOC_WRITE|_IOC_READ)) == 0)? \ + 0: (((nr) >> _IOC_SIZESHIFT) & _IOC_XSIZEMASK)) + +/* ...and for the PCMCIA and sound. */ +#define IOC_IN (_IOC_WRITE << _IOC_DIRSHIFT) +#define IOC_OUT (_IOC_READ << _IOC_DIRSHIFT) +#define IOC_INOUT ((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT) +#define IOCSIZE_MASK (_IOC_XSIZEMASK << _IOC_SIZESHIFT) +#define IOCSIZE_SHIFT (_IOC_SIZESHIFT) + +#endif /* !(_SPARC_IOCTL_H) */ diff --git a/include/asm-sparc/ioctls.h b/include/asm-sparc/ioctls.h new file mode 100644 index 00000000000..bdf77b0dfd8 --- /dev/null +++ b/include/asm-sparc/ioctls.h @@ -0,0 +1,134 @@ +#ifndef _ASM_SPARC_IOCTLS_H +#define _ASM_SPARC_IOCTLS_H + +#include <asm/ioctl.h> + +/* Big T */ +#define TCGETA _IOR('T', 1, struct termio) +#define TCSETA _IOW('T', 2, struct termio) +#define TCSETAW _IOW('T', 3, struct termio) +#define TCSETAF _IOW('T', 4, struct termio) +#define TCSBRK _IO('T', 5) +#define TCXONC _IO('T', 6) +#define TCFLSH _IO('T', 7) +#define TCGETS _IOR('T', 8, struct termios) +#define TCSETS _IOW('T', 9, struct termios) +#define TCSETSW _IOW('T', 10, struct termios) +#define TCSETSF _IOW('T', 11, struct termios) + +/* Note that all the ioctls that are not available in Linux have a + * double underscore on the front to: a) avoid some programs to + * thing we support some ioctls under Linux (autoconfiguration stuff) + */ +/* Little t */ +#define TIOCGETD _IOR('t', 0, int) +#define TIOCSETD _IOW('t', 1, int) +#define __TIOCHPCL _IO('t', 2) /* SunOS Specific */ +#define __TIOCMODG _IOR('t', 3, int) /* SunOS Specific */ +#define __TIOCMODS _IOW('t', 4, int) /* SunOS Specific */ +#define __TIOCGETP _IOR('t', 8, struct sgttyb) /* SunOS Specific */ +#define __TIOCSETP _IOW('t', 9, struct sgttyb) /* SunOS Specific */ +#define __TIOCSETN _IOW('t', 10, struct sgttyb) /* SunOS Specific */ +#define TIOCEXCL _IO('t', 13) +#define TIOCNXCL _IO('t', 14) +#define __TIOCFLUSH _IOW('t', 16, int) /* SunOS Specific */ +#define __TIOCSETC _IOW('t', 17, struct tchars) /* SunOS Specific */ +#define __TIOCGETC _IOR('t', 18, struct tchars) /* SunOS Specific */ +#define __TIOCTCNTL _IOW('t', 32, int) /* SunOS Specific */ +#define __TIOCSIGNAL _IOW('t', 33, int) /* SunOS Specific */ +#define __TIOCSETX _IOW('t', 34, int) /* SunOS Specific */ +#define __TIOCGETX _IOR('t', 35, int) /* SunOS Specific */ +#define TIOCCONS _IO('t', 36) +#define __TIOCSSIZE _IOW('t', 37, struct sunos_ttysize) /* SunOS Specific */ +#define __TIOCGSIZE _IOR('t', 38, struct sunos_ttysize) /* SunOS Specific */ +#define TIOCGSOFTCAR _IOR('t', 100, int) +#define TIOCSSOFTCAR _IOW('t', 101, int) +#define __TIOCUCNTL _IOW('t', 102, int) /* SunOS Specific */ +#define TIOCSWINSZ _IOW('t', 103, struct winsize) +#define TIOCGWINSZ _IOR('t', 104, struct winsize) +#define __TIOCREMOTE _IOW('t', 105, int) /* SunOS Specific */ +#define TIOCMGET _IOR('t', 106, int) +#define TIOCMBIC _IOW('t', 107, int) +#define TIOCMBIS _IOW('t', 108, int) +#define TIOCMSET _IOW('t', 109, int) +#define TIOCSTART _IO('t', 110) +#define TIOCSTOP _IO('t', 111) +#define TIOCPKT _IOW('t', 112, int) +#define TIOCNOTTY _IO('t', 113) +#define TIOCSTI _IOW('t', 114, char) +#define TIOCOUTQ _IOR('t', 115, int) +#define __TIOCGLTC _IOR('t', 116, struct ltchars) /* SunOS Specific */ +#define __TIOCSLTC _IOW('t', 117, struct ltchars) /* SunOS Specific */ +/* 118 is the non-posix setpgrp tty ioctl */ +/* 119 is the non-posix getpgrp tty ioctl */ +#define __TIOCCDTR _IO('t', 120) /* SunOS Specific */ +#define __TIOCSDTR _IO('t', 121) /* SunOS Specific */ +#define TIOCCBRK _IO('t', 122) +#define TIOCSBRK _IO('t', 123) +#define __TIOCLGET _IOW('t', 124, int) /* SunOS Specific */ +#define __TIOCLSET _IOW('t', 125, int) /* SunOS Specific */ +#define __TIOCLBIC _IOW('t', 126, int) /* SunOS Specific */ +#define __TIOCLBIS _IOW('t', 127, int) /* SunOS Specific */ +#define __TIOCISPACE _IOR('t', 128, int) /* SunOS Specific */ +#define __TIOCISIZE _IOR('t', 129, int) /* SunOS Specific */ +#define TIOCSPGRP _IOW('t', 130, int) +#define TIOCGPGRP _IOR('t', 131, int) +#define TIOCSCTTY _IO('t', 132) +#define TIOCGSID _IOR('t', 133, int) +/* Get minor device of a pty master's FD -- Solaris equiv is ISPTM */ +#define TIOCGPTN _IOR('t', 134, unsigned int) /* Get Pty Number */ +#define TIOCSPTLCK _IOW('t', 135, int) /* Lock/unlock PTY */ + +/* Little f */ +#define FIOCLEX _IO('f', 1) +#define FIONCLEX _IO('f', 2) +#define FIOASYNC _IOW('f', 125, int) +#define FIONBIO _IOW('f', 126, int) +#define FIONREAD _IOR('f', 127, int) +#define TIOCINQ FIONREAD +#define FIOQSIZE _IOR('f', 128, loff_t) + +/* SCARY Rutgers local SunOS kernel hackery, perhaps I will support it + * someday. This is completely bogus, I know... + */ +#define __TCGETSTAT _IO('T', 200) /* Rutgers specific */ +#define __TCSETSTAT _IO('T', 201) /* Rutgers specific */ + +/* Linux specific, no SunOS equivalent. */ +#define TIOCLINUX 0x541C +#define TIOCGSERIAL 0x541E +#define TIOCSSERIAL 0x541F +#define TCSBRKP 0x5425 +#define TIOCSERCONFIG 0x5453 +#define TIOCSERGWILD 0x5454 +#define TIOCSERSWILD 0x5455 +#define TIOCGLCKTRMIOS 0x5456 +#define TIOCSLCKTRMIOS 0x5457 +#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ +#define TIOCSERGETLSR 0x5459 /* Get line status register */ +#define TIOCSERGETMULTI 0x545A /* Get multiport config */ +#define TIOCSERSETMULTI 0x545B /* Set multiport config */ +#define TIOCMIWAIT 0x545C /* Wait input */ +#define TIOCGICOUNT 0x545D /* Read serial port inline interrupt counts */ + +/* Kernel definitions */ +#ifdef __KERNEL__ +#define TIOCGETC __TIOCGETC +#define TIOCGETP __TIOCGETP +#define TIOCGLTC __TIOCGLTC +#define TIOCSLTC __TIOCSLTC +#define TIOCSETP __TIOCSETP +#define TIOCSETN __TIOCSETN +#define TIOCSETC __TIOCSETC +#endif + +/* Used for packet mode */ +#define TIOCPKT_DATA 0 +#define TIOCPKT_FLUSHREAD 1 +#define TIOCPKT_FLUSHWRITE 2 +#define TIOCPKT_STOP 4 +#define TIOCPKT_START 8 +#define TIOCPKT_NOSTOP 16 +#define TIOCPKT_DOSTOP 32 + +#endif /* !(_ASM_SPARC_IOCTLS_H) */ diff --git a/include/asm-sparc/iommu.h b/include/asm-sparc/iommu.h new file mode 100644 index 00000000000..8171362d56b --- /dev/null +++ b/include/asm-sparc/iommu.h @@ -0,0 +1,121 @@ +/* iommu.h: Definitions for the sun4m IOMMU. + * + * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu) + */ +#ifndef _SPARC_IOMMU_H +#define _SPARC_IOMMU_H + +#include <asm/page.h> +#include <asm/bitext.h> + +/* The iommu handles all virtual to physical address translations + * that occur between the SBUS and physical memory. Access by + * the cpu to IO registers and similar go over the mbus so are + * translated by the on chip SRMMU. The iommu and the srmmu do + * not need to have the same translations at all, in fact most + * of the time the translations they handle are a disjunct set. + * Basically the iommu handles all dvma sbus activity. + */ + +/* The IOMMU registers occupy three pages in IO space. */ +struct iommu_regs { + /* First page */ + volatile unsigned long control; /* IOMMU control */ + volatile unsigned long base; /* Physical base of iopte page table */ + volatile unsigned long _unused1[3]; + volatile unsigned long tlbflush; /* write only */ + volatile unsigned long pageflush; /* write only */ + volatile unsigned long _unused2[1017]; + /* Second page */ + volatile unsigned long afsr; /* Async-fault status register */ + volatile unsigned long afar; /* Async-fault physical address */ + volatile unsigned long _unused3[2]; + volatile unsigned long sbuscfg0; /* SBUS configuration registers, per-slot */ + volatile unsigned long sbuscfg1; + volatile unsigned long sbuscfg2; + volatile unsigned long sbuscfg3; + volatile unsigned long mfsr; /* Memory-fault status register */ + volatile unsigned long mfar; /* Memory-fault physical address */ + volatile unsigned long _unused4[1014]; + /* Third page */ + volatile unsigned long mid; /* IOMMU module-id */ +}; + +#define IOMMU_CTRL_IMPL 0xf0000000 /* Implementation */ +#define IOMMU_CTRL_VERS 0x0f000000 /* Version */ +#define IOMMU_CTRL_RNGE 0x0000001c /* Mapping RANGE */ +#define IOMMU_RNGE_16MB 0x00000000 /* 0xff000000 -> 0xffffffff */ +#define IOMMU_RNGE_32MB 0x00000004 /* 0xfe000000 -> 0xffffffff */ +#define IOMMU_RNGE_64MB 0x00000008 /* 0xfc000000 -> 0xffffffff */ +#define IOMMU_RNGE_128MB 0x0000000c /* 0xf8000000 -> 0xffffffff */ +#define IOMMU_RNGE_256MB 0x00000010 /* 0xf0000000 -> 0xffffffff */ +#define IOMMU_RNGE_512MB 0x00000014 /* 0xe0000000 -> 0xffffffff */ +#define IOMMU_RNGE_1GB 0x00000018 /* 0xc0000000 -> 0xffffffff */ +#define IOMMU_RNGE_2GB 0x0000001c /* 0x80000000 -> 0xffffffff */ +#define IOMMU_CTRL_ENAB 0x00000001 /* IOMMU Enable */ + +#define IOMMU_AFSR_ERR 0x80000000 /* LE, TO, or BE asserted */ +#define IOMMU_AFSR_LE 0x40000000 /* SBUS reports error after transaction */ +#define IOMMU_AFSR_TO 0x20000000 /* Write access took more than 12.8 us. */ +#define IOMMU_AFSR_BE 0x10000000 /* Write access received error acknowledge */ +#define IOMMU_AFSR_SIZE 0x0e000000 /* Size of transaction causing error */ +#define IOMMU_AFSR_S 0x01000000 /* Sparc was in supervisor mode */ +#define IOMMU_AFSR_RESV 0x00f00000 /* Reserver, forced to 0x8 by hardware */ +#define IOMMU_AFSR_ME 0x00080000 /* Multiple errors occurred */ +#define IOMMU_AFSR_RD 0x00040000 /* A read operation was in progress */ +#define IOMMU_AFSR_FAV 0x00020000 /* IOMMU afar has valid contents */ + +#define IOMMU_SBCFG_SAB30 0x00010000 /* Phys-address bit 30 when bypass enabled */ +#define IOMMU_SBCFG_BA16 0x00000004 /* Slave supports 16 byte bursts */ +#define IOMMU_SBCFG_BA8 0x00000002 /* Slave supports 8 byte bursts */ +#define IOMMU_SBCFG_BYPASS 0x00000001 /* Bypass IOMMU, treat all addresses + produced by this device as pure + physical. */ + +#define IOMMU_MFSR_ERR 0x80000000 /* One or more of PERR1 or PERR0 */ +#define IOMMU_MFSR_S 0x01000000 /* Sparc was in supervisor mode */ +#define IOMMU_MFSR_CPU 0x00800000 /* CPU transaction caused parity error */ +#define IOMMU_MFSR_ME 0x00080000 /* Multiple parity errors occurred */ +#define IOMMU_MFSR_PERR 0x00006000 /* high bit indicates parity error occurred + on the even word of the access, low bit + indicated odd word caused the parity error */ +#define IOMMU_MFSR_BM 0x00001000 /* Error occurred while in boot mode */ +#define IOMMU_MFSR_C 0x00000800 /* Address causing error was marked cacheable */ +#define IOMMU_MFSR_RTYP 0x000000f0 /* Memory request transaction type */ + +#define IOMMU_MID_SBAE 0x001f0000 /* SBus arbitration enable */ +#define IOMMU_MID_SE 0x00100000 /* Enables SCSI/ETHERNET arbitration */ +#define IOMMU_MID_SB3 0x00080000 /* Enable SBUS device 3 arbitration */ +#define IOMMU_MID_SB2 0x00040000 /* Enable SBUS device 2 arbitration */ +#define IOMMU_MID_SB1 0x00020000 /* Enable SBUS device 1 arbitration */ +#define IOMMU_MID_SB0 0x00010000 /* Enable SBUS device 0 arbitration */ +#define IOMMU_MID_MID 0x0000000f /* Module-id, hardcoded to 0x8 */ + +/* The format of an iopte in the page tables */ +#define IOPTE_PAGE 0x07ffff00 /* Physical page number (PA[30:12]) */ +#define IOPTE_CACHE 0x00000080 /* Cached (in vme IOCACHE or Viking/MXCC) */ +#define IOPTE_WRITE 0x00000004 /* Writeable */ +#define IOPTE_VALID 0x00000002 /* IOPTE is valid */ +#define IOPTE_WAZ 0x00000001 /* Write as zeros */ + +struct iommu_struct { + struct iommu_regs *regs; + iopte_t *page_table; + /* For convenience */ + unsigned long start; /* First managed virtual address */ + unsigned long end; /* Last managed virtual address */ + + struct bit_map usemap; +}; + +extern __inline__ void iommu_invalidate(struct iommu_regs *regs) +{ + regs->tlbflush = 0; +} + +extern __inline__ void iommu_invalidate_page(struct iommu_regs *regs, unsigned long ba) +{ + regs->pageflush = (ba & PAGE_MASK); +} + +#endif /* !(_SPARC_IOMMU_H) */ diff --git a/include/asm-sparc/ipc.h b/include/asm-sparc/ipc.h new file mode 100644 index 00000000000..a46e3d9c2a3 --- /dev/null +++ b/include/asm-sparc/ipc.h @@ -0,0 +1 @@ +#include <asm-generic/ipc.h> diff --git a/include/asm-sparc/ipcbuf.h b/include/asm-sparc/ipcbuf.h new file mode 100644 index 00000000000..9bef02d04e4 --- /dev/null +++ b/include/asm-sparc/ipcbuf.h @@ -0,0 +1,31 @@ +#ifndef _SPARC_IPCBUF_H +#define _SPARC_IPCBUF_H + +/* + * The ipc64_perm structure for sparc architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 32-bit mode + * - 32-bit seq + * - 2 miscellaneous 64-bit values (so that this structure matches + * sparc64 ipc64_perm) + */ + +struct ipc64_perm +{ + __kernel_key_t key; + __kernel_uid32_t uid; + __kernel_gid32_t gid; + __kernel_uid32_t cuid; + __kernel_gid32_t cgid; + unsigned short __pad1; + __kernel_mode_t mode; + unsigned short __pad2; + unsigned short seq; + unsigned long long __unused1; + unsigned long long __unused2; +}; + +#endif /* _SPARC_IPCBUF_H */ diff --git a/include/asm-sparc/irq.h b/include/asm-sparc/irq.h new file mode 100644 index 00000000000..cee356b0dae --- /dev/null +++ b/include/asm-sparc/irq.h @@ -0,0 +1,191 @@ +/* $Id: irq.h,v 1.32 2000/08/26 02:42:28 anton Exp $ + * irq.h: IRQ registers on the Sparc. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef _SPARC_IRQ_H +#define _SPARC_IRQ_H + +#include <linux/config.h> +#include <linux/linkage.h> +#include <linux/threads.h> /* For NR_CPUS */ +#include <linux/interrupt.h> + +#include <asm/system.h> /* For SUN4M_NCPUS */ +#include <asm/btfixup.h> + +#define __irq_ino(irq) irq +#define __irq_pil(irq) irq +BTFIXUPDEF_CALL(char *, __irq_itoa, unsigned int) +#define __irq_itoa(irq) BTFIXUP_CALL(__irq_itoa)(irq) + +#define NR_IRQS 16 + +#define irq_canonicalize(irq) (irq) + +/* Dave Redman (djhr@tadpole.co.uk) + * changed these to function pointers.. it saves cycles and will allow + * the irq dependencies to be split into different files at a later date + * sun4c_irq.c, sun4m_irq.c etc so we could reduce the kernel size. + * Jakub Jelinek (jj@sunsite.mff.cuni.cz) + * Changed these to btfixup entities... It saves cycles :) + */ +BTFIXUPDEF_CALL(void, disable_irq, unsigned int) +BTFIXUPDEF_CALL(void, enable_irq, unsigned int) +BTFIXUPDEF_CALL(void, disable_pil_irq, unsigned int) +BTFIXUPDEF_CALL(void, enable_pil_irq, unsigned int) +BTFIXUPDEF_CALL(void, clear_clock_irq, void) +BTFIXUPDEF_CALL(void, clear_profile_irq, int) +BTFIXUPDEF_CALL(void, load_profile_irq, int, unsigned int) + +static inline void disable_irq_nosync(unsigned int irq) +{ + BTFIXUP_CALL(disable_irq)(irq); +} + +static inline void disable_irq(unsigned int irq) +{ + BTFIXUP_CALL(disable_irq)(irq); +} + +static inline void enable_irq(unsigned int irq) +{ + BTFIXUP_CALL(enable_irq)(irq); +} + +static inline void disable_pil_irq(unsigned int irq) +{ + BTFIXUP_CALL(disable_pil_irq)(irq); +} + +static inline void enable_pil_irq(unsigned int irq) +{ + BTFIXUP_CALL(enable_pil_irq)(irq); +} + +static inline void clear_clock_irq(void) +{ + BTFIXUP_CALL(clear_clock_irq)(); +} + +static inline void clear_profile_irq(int irq) +{ + BTFIXUP_CALL(clear_profile_irq)(irq); +} + +static inline void load_profile_irq(int cpu, int limit) +{ + BTFIXUP_CALL(load_profile_irq)(cpu, limit); +} + +extern void (*sparc_init_timers)(irqreturn_t (*lvl10_irq)(int, void *, struct pt_regs *)); +extern void claim_ticker14(irqreturn_t (*irq_handler)(int, void *, struct pt_regs *), + int irq, + unsigned int timeout); + +#ifdef CONFIG_SMP +BTFIXUPDEF_CALL(void, set_cpu_int, int, int) +BTFIXUPDEF_CALL(void, clear_cpu_int, int, int) +BTFIXUPDEF_CALL(void, set_irq_udt, int) + +#define set_cpu_int(cpu,level) BTFIXUP_CALL(set_cpu_int)(cpu,level) +#define clear_cpu_int(cpu,level) BTFIXUP_CALL(clear_cpu_int)(cpu,level) +#define set_irq_udt(cpu) BTFIXUP_CALL(set_irq_udt)(cpu) +#endif + +extern int request_fast_irq(unsigned int irq, irqreturn_t (*handler)(int, void *, struct pt_regs *), unsigned long flags, __const__ char *devname); + +/* On the sun4m, just like the timers, we have both per-cpu and master + * interrupt registers. + */ + +/* These registers are used for sending/receiving irqs from/to + * different cpu's. + */ +struct sun4m_intreg_percpu { + unsigned int tbt; /* Interrupts still pending for this cpu. */ + + /* These next two registers are WRITE-ONLY and are only + * "on bit" sensitive, "off bits" written have NO affect. + */ + unsigned int clear; /* Clear this cpus irqs here. */ + unsigned int set; /* Set this cpus irqs here. */ + unsigned char space[PAGE_SIZE - 12]; +}; + +/* + * djhr + * Actually the clear and set fields in this struct are misleading.. + * according to the SLAVIO manual (and the same applies for the SEC) + * the clear field clears bits in the mask which will ENABLE that IRQ + * the set field sets bits in the mask to DISABLE the IRQ. + * + * Also the undirected_xx address in the SLAVIO is defined as + * RESERVED and write only.. + * + * DAVEM_NOTE: The SLAVIO only specifies behavior on uniprocessor + * sun4m machines, for MP the layout makes more sense. + */ +struct sun4m_intregs { + struct sun4m_intreg_percpu cpu_intregs[SUN4M_NCPUS]; + unsigned int tbt; /* IRQ's that are still pending. */ + unsigned int irqs; /* Master IRQ bits. */ + + /* Again, like the above, two these registers are WRITE-ONLY. */ + unsigned int clear; /* Clear master IRQ's by setting bits here. */ + unsigned int set; /* Set master IRQ's by setting bits here. */ + + /* This register is both READ and WRITE. */ + unsigned int undirected_target; /* Which cpu gets undirected irqs. */ +}; + +extern struct sun4m_intregs *sun4m_interrupts; + +/* + * Bit field defines for the interrupt registers on various + * Sparc machines. + */ + +/* The sun4c interrupt register. */ +#define SUN4C_INT_ENABLE 0x01 /* Allow interrupts. */ +#define SUN4C_INT_E14 0x80 /* Enable level 14 IRQ. */ +#define SUN4C_INT_E10 0x20 /* Enable level 10 IRQ. */ +#define SUN4C_INT_E8 0x10 /* Enable level 8 IRQ. */ +#define SUN4C_INT_E6 0x08 /* Enable level 6 IRQ. */ +#define SUN4C_INT_E4 0x04 /* Enable level 4 IRQ. */ +#define SUN4C_INT_E1 0x02 /* Enable level 1 IRQ. */ + +/* Dave Redman (djhr@tadpole.co.uk) + * The sun4m interrupt registers. + */ +#define SUN4M_INT_ENABLE 0x80000000 +#define SUN4M_INT_E14 0x00000080 +#define SUN4M_INT_E10 0x00080000 + +#define SUN4M_HARD_INT(x) (0x000000001 << (x)) +#define SUN4M_SOFT_INT(x) (0x000010000 << (x)) + +#define SUN4M_INT_MASKALL 0x80000000 /* mask all interrupts */ +#define SUN4M_INT_MODULE_ERR 0x40000000 /* module error */ +#define SUN4M_INT_M2S_WRITE 0x20000000 /* write buffer error */ +#define SUN4M_INT_ECC 0x10000000 /* ecc memory error */ +#define SUN4M_INT_FLOPPY 0x00400000 /* floppy disk */ +#define SUN4M_INT_MODULE 0x00200000 /* module interrupt */ +#define SUN4M_INT_VIDEO 0x00100000 /* onboard video */ +#define SUN4M_INT_REALTIME 0x00080000 /* system timer */ +#define SUN4M_INT_SCSI 0x00040000 /* onboard scsi */ +#define SUN4M_INT_AUDIO 0x00020000 /* audio/isdn */ +#define SUN4M_INT_ETHERNET 0x00010000 /* onboard ethernet */ +#define SUN4M_INT_SERIAL 0x00008000 /* serial ports */ +#define SUN4M_INT_KBDMS 0x00004000 /* keyboard/mouse */ +#define SUN4M_INT_SBUSBITS 0x00003F80 /* sbus int bits */ + +#define SUN4M_INT_SBUS(x) (1 << (x+7)) +#define SUN4M_INT_VME(x) (1 << (x)) + +struct irqaction; +struct pt_regs; +int handle_IRQ_event(unsigned int, struct pt_regs *, struct irqaction *); + +#endif diff --git a/include/asm-sparc/jsflash.h b/include/asm-sparc/jsflash.h new file mode 100644 index 00000000000..3457f29bd73 --- /dev/null +++ b/include/asm-sparc/jsflash.h @@ -0,0 +1,39 @@ +/* + * jsflash.h: OS Flash SIMM support for JavaStations. + * + * Copyright (C) 1999 Pete Zaitcev + */ + +#ifndef _SPARC_JSFLASH_H +#define _SPARC_JSFLASH_H + +#ifndef _SPARC_TYPES_H +#include <asm/types.h> +#endif + +/* + * Semantics of the offset is a full address. + * Hardcode it or get it from probe ioctl. + * + * We use full bus address, so that we would be + * automatically compatible with possible future systems. + */ + +#define JSFLASH_IDENT (('F'<<8)|54) +struct jsflash_ident_arg { + __u64 off; /* 0x20000000 is included */ + __u32 size; + char name[32]; /* With trailing zero */ +}; + +#define JSFLASH_ERASE (('F'<<8)|55) +/* Put 0 as argument, may be flags or sector number... */ + +#define JSFLASH_PROGRAM (('F'<<8)|56) +struct jsflash_program_arg { + __u64 data; /* char* for sparc and sparc64 */ + __u64 off; + __u32 size; +}; + +#endif /* _SPARC_JSFLASH_H */ diff --git a/include/asm-sparc/kbio.h b/include/asm-sparc/kbio.h new file mode 100644 index 00000000000..3cf496bdf39 --- /dev/null +++ b/include/asm-sparc/kbio.h @@ -0,0 +1,56 @@ +#ifndef __LINUX_KBIO_H +#define __LINUX_KBIO_H + +/* Return keyboard type */ +#define KIOCTYPE _IOR('k', 9, int) +/* Return Keyboard layout */ +#define KIOCLAYOUT _IOR('k', 20, int) + +enum { + TR_NONE, + TR_ASCII, /* keyboard is in regular state */ + TR_EVENT, /* keystrokes sent as firm events */ + TR_UNTRANS_EVENT /* EVENT+up and down+no translation */ +}; + +/* Return the current keyboard translation */ +#define KIOCGTRANS _IOR('k', 5, int) +/* Set the keyboard translation */ +#define KIOCTRANS _IOW('k', 0, int) + +/* Send a keyboard command */ +#define KIOCCMD _IOW('k', 8, int) + +/* Return if keystrokes are being sent to /dev/kbd */ + +/* Set routing of keystrokes to /dev/kbd */ +#define KIOCSDIRECT _IOW('k', 10, int) + +/* Set keyboard leds */ +#define KIOCSLED _IOW('k', 14, unsigned char) + +/* Get keyboard leds */ +#define KIOCGLED _IOR('k', 15, unsigned char) + +/* Used by KIOC[GS]RATE */ +struct kbd_rate { + unsigned char delay; /* Delay in Hz before first repeat. */ + unsigned char rate; /* In characters per second (0..50). */ +}; + +/* Set keyboard rate */ +#define KIOCSRATE _IOW('k', 40, struct kbd_rate) + +/* Get keyboard rate */ +#define KIOCGRATE _IOW('k', 41, struct kbd_rate) + +/* Top bit records if the key is up or down */ +#define KBD_UP 0x80 + +/* Usable information */ +#define KBD_KEYMASK 0x7f + +/* All keys up */ +#define KBD_IDLE 0x75 + +#endif /* __LINUX_KBIO_H */ diff --git a/include/asm-sparc/kdebug.h b/include/asm-sparc/kdebug.h new file mode 100644 index 00000000000..3ea4916635e --- /dev/null +++ b/include/asm-sparc/kdebug.h @@ -0,0 +1,69 @@ +/* $Id: kdebug.h,v 1.11 2000/06/04 06:23:53 anton Exp $ + * kdebug.h: Defines and definitions for debugging the Linux kernel + * under various kernel debuggers. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ +#ifndef _SPARC_KDEBUG_H +#define _SPARC_KDEBUG_H + +#include <asm/openprom.h> +#include <asm/vaddrs.h> + +/* Breakpoints are enter through trap table entry 126. So in sparc assembly + * if you want to drop into the debugger you do: + * + * t DEBUG_BP_TRAP + */ + +#define DEBUG_BP_TRAP 126 + +#ifndef __ASSEMBLY__ +/* The debug vector is passed in %o1 at boot time. It is a pointer to + * a structure in the debuggers address space. Here is its format. + */ + +typedef unsigned int (*debugger_funct)(void); + +struct kernel_debug { + /* First the entry point into the debugger. You jump here + * to give control over to the debugger. + */ + unsigned long kdebug_entry; + unsigned long kdebug_trapme; /* Figure out later... */ + /* The following is the number of pages that the debugger has + * taken from to total pool. + */ + unsigned long *kdebug_stolen_pages; + /* Ok, after you remap yourself and/or change the trap table + * from what you were left with at boot time you have to call + * this synchronization function so the debugger can check out + * what you have done. + */ + debugger_funct teach_debugger; +}; /* I think that is it... */ + +extern struct kernel_debug *linux_dbvec; + +/* Use this macro in C-code to enter the debugger. */ +extern __inline__ void sp_enter_debugger(void) +{ + __asm__ __volatile__("jmpl %0, %%o7\n\t" + "nop\n\t" : : + "r" (linux_dbvec) : "o7", "memory"); +} + +#define SP_ENTER_DEBUGGER do { \ + if((linux_dbvec!=0) && ((*(short *)linux_dbvec)!=-1)) \ + sp_enter_debugger(); \ + } while(0) + +#endif /* !(__ASSEMBLY__) */ + +/* Some nice offset defines for assembler code. */ +#define KDEBUG_ENTRY_OFF 0x0 +#define KDEBUG_DUNNO_OFF 0x4 +#define KDEBUG_DUNNO2_OFF 0x8 +#define KDEBUG_TEACH_OFF 0xc + +#endif /* !(_SPARC_KDEBUG_H) */ diff --git a/include/asm-sparc/kgdb.h b/include/asm-sparc/kgdb.h new file mode 100644 index 00000000000..d120adfb429 --- /dev/null +++ b/include/asm-sparc/kgdb.h @@ -0,0 +1,94 @@ +/* $Id: kgdb.h,v 1.8 1998/01/07 06:33:44 baccala Exp $ + * kgdb.h: Defines and declarations for serial line source level + * remote debugging of the Linux kernel using gdb. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ +#ifndef _SPARC_KGDB_H +#define _SPARC_KGDB_H + +#ifndef __ASSEMBLY__ +/* To init the kgdb engine. */ +extern void set_debug_traps(void); + +/* To enter the debugger explicitly. */ +extern void breakpoint(void); + +/* For convenience we define the format of a kgdb trap breakpoint + * frame here also. + */ +struct kgdb_frame { + unsigned long globals[8]; + unsigned long outs[8]; + unsigned long locals[8]; + unsigned long ins[8]; + unsigned long fpregs[32]; + unsigned long y; + unsigned long psr; + unsigned long wim; + unsigned long tbr; + unsigned long pc; + unsigned long npc; + unsigned long fpsr; + unsigned long cpsr; +}; +#endif /* !(__ASSEMBLY__) */ + +/* Macros for assembly usage of the kgdb breakpoint frame. */ +#define KGDB_G0 0x000 +#define KGDB_G1 0x004 +#define KGDB_G2 0x008 +#define KGDB_G4 0x010 +#define KGDB_G6 0x018 +#define KGDB_I0 0x020 +#define KGDB_I2 0x028 +#define KGDB_I4 0x030 +#define KGDB_I6 0x038 +#define KGDB_Y 0x100 +#define KGDB_PSR 0x104 +#define KGDB_WIM 0x108 +#define KGDB_TBR 0x10c +#define KGDB_PC 0x110 +#define KGDB_NPC 0x114 + +#define SAVE_KGDB_GLOBALS(reg) \ + std %g0, [%reg + STACKFRAME_SZ + KGDB_G0]; \ + std %g2, [%reg + STACKFRAME_SZ + KGDB_G2]; \ + std %g4, [%reg + STACKFRAME_SZ + KGDB_G4]; \ + std %g6, [%reg + STACKFRAME_SZ + KGDB_G6]; + +#define SAVE_KGDB_INS(reg) \ + std %i0, [%reg + STACKFRAME_SZ + KGDB_I0]; \ + std %i2, [%reg + STACKFRAME_SZ + KGDB_I2]; \ + std %i4, [%reg + STACKFRAME_SZ + KGDB_I4]; \ + std %i6, [%reg + STACKFRAME_SZ + KGDB_I6]; + +#define SAVE_KGDB_SREGS(reg, reg_y, reg_psr, reg_wim, reg_tbr, reg_pc, reg_npc) \ + st %reg_y, [%reg + STACKFRAME_SZ + KGDB_Y]; \ + st %reg_psr, [%reg + STACKFRAME_SZ + KGDB_PSR]; \ + st %reg_wim, [%reg + STACKFRAME_SZ + KGDB_WIM]; \ + st %reg_tbr, [%reg + STACKFRAME_SZ + KGDB_TBR]; \ + st %reg_pc, [%reg + STACKFRAME_SZ + KGDB_PC]; \ + st %reg_npc, [%reg + STACKFRAME_SZ + KGDB_NPC]; + +#define LOAD_KGDB_GLOBALS(reg) \ + ld [%reg + STACKFRAME_SZ + KGDB_G1], %g1; \ + ldd [%reg + STACKFRAME_SZ + KGDB_G2], %g2; \ + ldd [%reg + STACKFRAME_SZ + KGDB_G4], %g4; \ + ldd [%reg + STACKFRAME_SZ + KGDB_G6], %g6; + +#define LOAD_KGDB_INS(reg) \ + ldd [%reg + STACKFRAME_SZ + KGDB_I0], %i0; \ + ldd [%reg + STACKFRAME_SZ + KGDB_I2], %i2; \ + ldd [%reg + STACKFRAME_SZ + KGDB_I4], %i4; \ + ldd [%reg + STACKFRAME_SZ + KGDB_I6], %i6; + +#define LOAD_KGDB_SREGS(reg, reg_y, reg_psr, reg_wim, reg_tbr, reg_pc, reg_npc) \ + ld [%reg + STACKFRAME_SZ + KGDB_Y], %reg_y; \ + ld [%reg + STACKFRAME_SZ + KGDB_PSR], %reg_psr; \ + ld [%reg + STACKFRAME_SZ + KGDB_WIM], %reg_wim; \ + ld [%reg + STACKFRAME_SZ + KGDB_TBR], %reg_tbr; \ + ld [%reg + STACKFRAME_SZ + KGDB_PC], %reg_pc; \ + ld [%reg + STACKFRAME_SZ + KGDB_NPC], %reg_npc; + +#endif /* !(_SPARC_KGDB_H) */ diff --git a/include/asm-sparc/kmap_types.h b/include/asm-sparc/kmap_types.h new file mode 100644 index 00000000000..e215f710497 --- /dev/null +++ b/include/asm-sparc/kmap_types.h @@ -0,0 +1,21 @@ +#ifndef _ASM_KMAP_TYPES_H +#define _ASM_KMAP_TYPES_H + +enum km_type { + KM_BOUNCE_READ, + KM_SKB_SUNRPC_DATA, + KM_SKB_DATA_SOFTIRQ, + KM_USER0, + KM_USER1, + KM_BIO_SRC_IRQ, + KM_BIO_DST_IRQ, + KM_PTE0, + KM_PTE1, + KM_IRQ0, + KM_IRQ1, + KM_SOFTIRQ0, + KM_SOFTIRQ1, + KM_TYPE_NR +}; + +#endif diff --git a/include/asm-sparc/linkage.h b/include/asm-sparc/linkage.h new file mode 100644 index 00000000000..291c2d01c44 --- /dev/null +++ b/include/asm-sparc/linkage.h @@ -0,0 +1,6 @@ +#ifndef __ASM_LINKAGE_H +#define __ASM_LINKAGE_H + +/* Nothing to see here... */ + +#endif diff --git a/include/asm-sparc/local.h b/include/asm-sparc/local.h new file mode 100644 index 00000000000..bc80815a435 --- /dev/null +++ b/include/asm-sparc/local.h @@ -0,0 +1,6 @@ +#ifndef _SPARC_LOCAL_H +#define _SPARC_LOCAL_H + +#include <asm-generic/local.h> + +#endif diff --git a/include/asm-sparc/machines.h b/include/asm-sparc/machines.h new file mode 100644 index 00000000000..d831350f542 --- /dev/null +++ b/include/asm-sparc/machines.h @@ -0,0 +1,69 @@ +/* $Id: machines.h,v 1.4 1995/11/25 02:31:58 davem Exp $ + * machines.h: Defines for taking apart the machine type value in the + * idprom and determining the kind of machine we are on. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ +#ifndef _SPARC_MACHINES_H +#define _SPARC_MACHINES_H + +struct Sun_Machine_Models { + char *name; + unsigned char id_machtype; +}; + +/* Current number of machines we know about that has an IDPROM + * machtype entry including one entry for the 0x80 OBP machines. + */ +#define NUM_SUN_MACHINES 15 + +extern struct Sun_Machine_Models Sun_Machines[NUM_SUN_MACHINES]; + +/* The machine type in the idprom area looks like this: + * + * --------------- + * | ARCH | MACH | + * --------------- + * 7 4 3 0 + * + * The ARCH field determines the architecture line (sun4, sun4c, etc). + * The MACH field determines the machine make within that architecture. + */ + +#define SM_ARCH_MASK 0xf0 +#define SM_SUN4 0x20 +#define SM_SUN4C 0x50 +#define SM_SUN4M 0x70 +#define SM_SUN4M_OBP 0x80 + +#define SM_TYP_MASK 0x0f +/* Sun4 machines */ +#define SM_4_260 0x01 /* Sun 4/200 series */ +#define SM_4_110 0x02 /* Sun 4/100 series */ +#define SM_4_330 0x03 /* Sun 4/300 series */ +#define SM_4_470 0x04 /* Sun 4/400 series */ + +/* Sun4c machines Full Name - PROM NAME */ +#define SM_4C_SS1 0x01 /* Sun4c SparcStation 1 - Sun 4/60 */ +#define SM_4C_IPC 0x02 /* Sun4c SparcStation IPC - Sun 4/40 */ +#define SM_4C_SS1PLUS 0x03 /* Sun4c SparcStation 1+ - Sun 4/65 */ +#define SM_4C_SLC 0x04 /* Sun4c SparcStation SLC - Sun 4/20 */ +#define SM_4C_SS2 0x05 /* Sun4c SparcStation 2 - Sun 4/75 */ +#define SM_4C_ELC 0x06 /* Sun4c SparcStation ELC - Sun 4/25 */ +#define SM_4C_IPX 0x07 /* Sun4c SparcStation IPX - Sun 4/50 */ + +/* Sun4m machines, these predate the OpenBoot. These values only mean + * something if the value in the ARCH field is SM_SUN4M, if it is + * SM_SUN4M_OBP then you have the following situation: + * 1) You either have a sun4d, a sun4e, or a recently made sun4m. + * 2) You have to consult OpenBoot to determine which machine this is. + */ +#define SM_4M_SS60 0x01 /* Sun4m SparcSystem 600 */ +#define SM_4M_SS50 0x02 /* Sun4m SparcStation 10 */ +#define SM_4M_SS40 0x03 /* Sun4m SparcStation 5 */ + +/* Sun4d machines -- N/A */ +/* Sun4e machines -- N/A */ +/* Sun4u machines -- N/A */ + +#endif /* !(_SPARC_MACHINES_H) */ diff --git a/include/asm-sparc/mbus.h b/include/asm-sparc/mbus.h new file mode 100644 index 00000000000..5f274901534 --- /dev/null +++ b/include/asm-sparc/mbus.h @@ -0,0 +1,102 @@ +/* $Id: mbus.h,v 1.9 1997/06/24 15:48:12 jj Exp $ + * mbus.h: Various defines for MBUS modules. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef _SPARC_MBUS_H +#define _SPARC_MBUS_H + +#include <asm/ross.h> /* HyperSparc stuff */ +#include <asm/cypress.h> /* Cypress Chips */ +#include <asm/viking.h> /* Ugh, bug city... */ + +enum mbus_module { + HyperSparc = 0, + Cypress = 1, + Cypress_vE = 2, + Cypress_vD = 3, + Swift_ok = 4, + Swift_bad_c = 5, + Swift_lots_o_bugs = 6, + Tsunami = 7, + Viking_12 = 8, + Viking_2x = 9, + Viking_30 = 10, + Viking_35 = 11, + Viking_new = 12, + TurboSparc = 13, + SRMMU_INVAL_MOD = 14, +}; + +extern enum mbus_module srmmu_modtype; +extern unsigned int viking_rev, swift_rev, cypress_rev; + +/* HW Mbus module bugs we have to deal with */ +#define HWBUG_COPYBACK_BROKEN 0x00000001 +#define HWBUG_ASIFLUSH_BROKEN 0x00000002 +#define HWBUG_VACFLUSH_BITROT 0x00000004 +#define HWBUG_KERN_ACCBROKEN 0x00000008 +#define HWBUG_KERN_CBITBROKEN 0x00000010 +#define HWBUG_MODIFIED_BITROT 0x00000020 +#define HWBUG_PC_BADFAULT_ADDR 0x00000040 +#define HWBUG_SUPERSCALAR_BAD 0x00000080 +#define HWBUG_PACINIT_BITROT 0x00000100 + +extern unsigned int hwbug_bitmask; + +/* First the module type values. To find out which you have, just load + * the mmu control register from ASI_M_MMUREG alternate address space and + * shift the value right 28 bits. + */ +/* IMPL field means the company which produced the chip. */ +#define MBUS_VIKING 0x4 /* bleech, Texas Instruments Module */ +#define MBUS_LSI 0x3 /* LSI Logics */ +#define MBUS_ROSS 0x1 /* Ross is nice */ +#define MBUS_FMI 0x0 /* Fujitsu Microelectronics/Swift */ + +/* Ross Module versions */ +#define ROSS_604_REV_CDE 0x0 /* revisions c, d, and e */ +#define ROSS_604_REV_F 0x1 /* revision f */ +#define ROSS_605 0xf /* revision a, a.1, and a.2 */ +#define ROSS_605_REV_B 0xe /* revision b */ + +/* TI Viking Module versions */ +#define VIKING_REV_12 0x1 /* Version 1.2 or SPARCclassic's CPU */ +#define VIKING_REV_2 0x2 /* Version 2.1, 2.2, 2.3, and 2.4 */ +#define VIKING_REV_30 0x3 /* Version 3.0 */ +#define VIKING_REV_35 0x4 /* Version 3.5 */ + +/* LSI Logics. */ +#define LSI_L64815 0x0 + +/* Fujitsu */ +#define FMI_AURORA 0x4 /* MB8690x, a Swift module... */ +#define FMI_TURBO 0x5 /* MB86907, a TurboSparc module... */ + +/* For multiprocessor support we need to be able to obtain the CPU id and + * the MBUS Module id. + */ + +/* The CPU ID is encoded in the trap base register, 20 bits to the left of + * bit zero, with 2 bits being significant. + */ +#define TBR_ID_SHIFT 20 + +extern __inline__ int get_cpuid(void) +{ + register int retval; + __asm__ __volatile__("rd %%tbr, %0\n\t" + "srl %0, %1, %0\n\t" : + "=r" (retval) : + "i" (TBR_ID_SHIFT)); + return (retval & 3); +} + +extern __inline__ int get_modid(void) +{ + return (get_cpuid() | 0x8); +} + + +#endif /* !(_SPARC_MBUS_H) */ diff --git a/include/asm-sparc/mc146818rtc.h b/include/asm-sparc/mc146818rtc.h new file mode 100644 index 00000000000..fa7eac92658 --- /dev/null +++ b/include/asm-sparc/mc146818rtc.h @@ -0,0 +1,29 @@ +/* + * Machine dependent access functions for RTC registers. + */ +#ifndef __ASM_SPARC_MC146818RTC_H +#define __ASM_SPARC_MC146818RTC_H + +#include <asm/io.h> + +#ifndef RTC_PORT +#define RTC_PORT(x) (0x70 + (x)) +#define RTC_ALWAYS_BCD 1 /* RTC operates in binary mode */ +#endif + +/* + * The yet supported machines all access the RTC index register via + * an ISA port access but the way to access the date register differs ... + */ +#define CMOS_READ(addr) ({ \ +outb_p((addr),RTC_PORT(0)); \ +inb_p(RTC_PORT(1)); \ +}) +#define CMOS_WRITE(val, addr) ({ \ +outb_p((addr),RTC_PORT(0)); \ +outb_p((val),RTC_PORT(1)); \ +}) + +#define RTC_IRQ 8 + +#endif /* __ASM_SPARC_MC146818RTC_H */ diff --git a/include/asm-sparc/memreg.h b/include/asm-sparc/memreg.h new file mode 100644 index 00000000000..c0498d3baf9 --- /dev/null +++ b/include/asm-sparc/memreg.h @@ -0,0 +1,52 @@ +/* $Id: memreg.h,v 1.8 1996/08/29 09:48:23 davem Exp $ */ +#ifndef _SPARC_MEMREG_H +#define _SPARC_MEMREG_H +/* memreg.h: Definitions of the values found in the synchronous + * and asynchronous memory error registers when a fault + * occurs on the sun4c. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + +/* First the synchronous error codes, these are usually just + * normal page faults. + */ + +#define SUN4C_SYNC_WDRESET 0x0001 /* watchdog reset */ +#define SUN4C_SYNC_SIZE 0x0002 /* bad access size? whuz this? */ +#define SUN4C_SYNC_PARITY 0x0008 /* bad ram chips caused a parity error */ +#define SUN4C_SYNC_SBUS 0x0010 /* the SBUS had some problems... */ +#define SUN4C_SYNC_NOMEM 0x0020 /* translation to non-existent ram */ +#define SUN4C_SYNC_PROT 0x0040 /* access violated pte protections */ +#define SUN4C_SYNC_NPRESENT 0x0080 /* pte said that page was not present */ +#define SUN4C_SYNC_BADWRITE 0x8000 /* while writing something went bogus */ + +#define SUN4C_SYNC_BOLIXED \ + (SUN4C_SYNC_WDRESET | SUN4C_SYNC_SIZE | SUN4C_SYNC_SBUS | \ + SUN4C_SYNC_NOMEM | SUN4C_SYNC_PARITY) + +/* Now the asynchronous error codes, these are almost always produced + * by the cache writing things back to memory and getting a bad translation. + * Bad DVMA transactions can cause these faults too. + */ + +#define SUN4C_ASYNC_BADDVMA 0x0010 /* error during DVMA access */ +#define SUN4C_ASYNC_NOMEM 0x0020 /* write back pointed to bad phys addr */ +#define SUN4C_ASYNC_BADWB 0x0080 /* write back points to non-present page */ + +/* Memory parity error register with associated bit constants. */ +#ifndef __ASSEMBLY__ +extern __volatile__ unsigned long *sun4c_memerr_reg; +#endif + +#define SUN4C_MPE_ERROR 0x80 /* Parity error detected. (ro) */ +#define SUN4C_MPE_MULTI 0x40 /* Multiple parity errors detected. (ro) */ +#define SUN4C_MPE_TEST 0x20 /* Write inverse parity. (rw) */ +#define SUN4C_MPE_CHECK 0x10 /* Enable parity checking. (rw) */ +#define SUN4C_MPE_ERR00 0x08 /* Parity error in bits 0-7. (ro) */ +#define SUN4C_MPE_ERR08 0x04 /* Parity error in bits 8-15. (ro) */ +#define SUN4C_MPE_ERR16 0x02 /* Parity error in bits 16-23. (ro) */ +#define SUN4C_MPE_ERR24 0x01 /* Parity error in bits 24-31. (ro) */ +#define SUN4C_MPE_ERRS 0x0F /* Bit mask for the error bits. (ro) */ + +#endif /* !(_SPARC_MEMREG_H) */ diff --git a/include/asm-sparc/mman.h b/include/asm-sparc/mman.h new file mode 100644 index 00000000000..138eb81dd70 --- /dev/null +++ b/include/asm-sparc/mman.h @@ -0,0 +1,62 @@ +/* $Id: mman.h,v 1.9 2000/03/15 02:44:23 davem Exp $ */ +#ifndef __SPARC_MMAN_H__ +#define __SPARC_MMAN_H__ + +/* SunOS'ified... */ + +#define PROT_READ 0x1 /* page can be read */ +#define PROT_WRITE 0x2 /* page can be written */ +#define PROT_EXEC 0x4 /* page can be executed */ +#define PROT_SEM 0x8 /* page may be used for atomic ops */ +#define PROT_NONE 0x0 /* page can not be accessed */ +#define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */ +#define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end of growsup vma */ + +#define MAP_SHARED 0x01 /* Share changes */ +#define MAP_PRIVATE 0x02 /* Changes are private */ +#define MAP_TYPE 0x0f /* Mask for type of mapping */ +#define MAP_FIXED 0x10 /* Interpret addr exactly */ +#define MAP_ANONYMOUS 0x20 /* don't use a file */ +#define MAP_RENAME MAP_ANONYMOUS /* In SunOS terminology */ +#define MAP_NORESERVE 0x40 /* don't reserve swap pages */ +#define MAP_INHERIT 0x80 /* SunOS doesn't do this, but... */ +#define MAP_LOCKED 0x100 /* lock the mapping */ +#define _MAP_NEW 0x80000000 /* Binary compatibility is fun... */ + +#define MAP_GROWSDOWN 0x0200 /* stack-like segment */ +#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ +#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ + +#define MS_ASYNC 1 /* sync memory asynchronously */ +#define MS_INVALIDATE 2 /* invalidate the caches */ +#define MS_SYNC 4 /* synchronous memory sync */ + +#define MCL_CURRENT 0x2000 /* lock all currently mapped pages */ +#define MCL_FUTURE 0x4000 /* lock all additions to address space */ + +#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */ +#define MAP_NONBLOCK 0x10000 /* do not block on IO */ + +/* XXX Need to add flags to SunOS's mctl, mlockall, and madvise system + * XXX calls. + */ + +/* SunOS sys_mctl() stuff... */ +#define MC_SYNC 1 /* Sync pages in memory with storage (usu. a file) */ +#define MC_LOCK 2 /* Lock pages into core ram, do not allow swapping of them */ +#define MC_UNLOCK 3 /* Unlock pages locked via previous mctl() with MC_LOCK arg */ +#define MC_LOCKAS 5 /* Lock an entire address space of the calling process */ +#define MC_UNLOCKAS 6 /* Unlock entire address space of calling process */ + +#define MADV_NORMAL 0x0 /* default page-in behavior */ +#define MADV_RANDOM 0x1 /* page-in minimum required */ +#define MADV_SEQUENTIAL 0x2 /* read-ahead aggressively */ +#define MADV_WILLNEED 0x3 /* pre-fault pages */ +#define MADV_DONTNEED 0x4 /* discard these pages */ +#define MADV_FREE 0x5 /* (Solaris) contents can be freed */ + +/* compatibility flags */ +#define MAP_ANON MAP_ANONYMOUS +#define MAP_FILE 0 + +#endif /* __SPARC_MMAN_H__ */ diff --git a/include/asm-sparc/mmu.h b/include/asm-sparc/mmu.h new file mode 100644 index 00000000000..ccd36d26615 --- /dev/null +++ b/include/asm-sparc/mmu.h @@ -0,0 +1,7 @@ +#ifndef __MMU_H +#define __MMU_H + +/* Default "unsigned long" context */ +typedef unsigned long mm_context_t; + +#endif diff --git a/include/asm-sparc/mmu_context.h b/include/asm-sparc/mmu_context.h new file mode 100644 index 00000000000..ed1e01d04d2 --- /dev/null +++ b/include/asm-sparc/mmu_context.h @@ -0,0 +1,40 @@ +#ifndef __SPARC_MMU_CONTEXT_H +#define __SPARC_MMU_CONTEXT_H + +#include <asm/btfixup.h> + +#ifndef __ASSEMBLY__ + +static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) +{ +} + +/* + * Initialize a new mmu context. This is invoked when a new + * address space instance (unique or shared) is instantiated. + */ +#define init_new_context(tsk, mm) (((mm)->context = NO_CONTEXT), 0) + +/* + * Destroy a dead context. This occurs when mmput drops the + * mm_users count to zero, the mmaps have been released, and + * all the page tables have been flushed. Our job is to destroy + * any remaining processor-specific state. + */ +BTFIXUPDEF_CALL(void, destroy_context, struct mm_struct *) + +#define destroy_context(mm) BTFIXUP_CALL(destroy_context)(mm) + +/* Switch the current MM context. */ +BTFIXUPDEF_CALL(void, switch_mm, struct mm_struct *, struct mm_struct *, struct task_struct *) + +#define switch_mm(old_mm, mm, tsk) BTFIXUP_CALL(switch_mm)(old_mm, mm, tsk) + +#define deactivate_mm(tsk,mm) do { } while (0) + +/* Activate a new MM instance for the current task. */ +#define activate_mm(active_mm, mm) switch_mm((active_mm), (mm), NULL) + +#endif /* !(__ASSEMBLY__) */ + +#endif /* !(__SPARC_MMU_CONTEXT_H) */ diff --git a/include/asm-sparc/module.h b/include/asm-sparc/module.h new file mode 100644 index 00000000000..cbd9e67b0c0 --- /dev/null +++ b/include/asm-sparc/module.h @@ -0,0 +1,7 @@ +#ifndef _ASM_SPARC_MODULE_H +#define _ASM_SPARC_MODULE_H +struct mod_arch_specific { }; +#define Elf_Shdr Elf32_Shdr +#define Elf_Sym Elf32_Sym +#define Elf_Ehdr Elf32_Ehdr +#endif /* _ASM_SPARC_MODULE_H */ diff --git a/include/asm-sparc/mostek.h b/include/asm-sparc/mostek.h new file mode 100644 index 00000000000..59b86bc793b --- /dev/null +++ b/include/asm-sparc/mostek.h @@ -0,0 +1,174 @@ +/* $Id: mostek.h,v 1.13 2001/01/11 15:07:09 davem Exp $ + * mostek.h: Describes the various Mostek time of day clock registers. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu) + * Added intersil code 05/25/98 Chris Davis (cdavis@cois.on.ca) + */ + +#ifndef _SPARC_MOSTEK_H +#define _SPARC_MOSTEK_H + +#include <linux/config.h> +#include <asm/idprom.h> +#include <asm/io.h> + +/* M48T02 Register Map (adapted from Sun NVRAM/Hostid FAQ) + * + * Data + * Address Function + * Bit 7 Bit 6 Bit 5 Bit 4Bit 3 Bit 2 Bit 1 Bit 0 + * 7ff - - - - - - - - Year 00-99 + * 7fe 0 0 0 - - - - - Month 01-12 + * 7fd 0 0 - - - - - - Date 01-31 + * 7fc 0 FT 0 0 0 - - - Day 01-07 + * 7fb KS 0 - - - - - - Hours 00-23 + * 7fa 0 - - - - - - - Minutes 00-59 + * 7f9 ST - - - - - - - Seconds 00-59 + * 7f8 W R S - - - - - Control + * + * * ST is STOP BIT + * * W is WRITE BIT + * * R is READ BIT + * * S is SIGN BIT + * * FT is FREQ TEST BIT + * * KS is KICK START BIT + */ + +/* The Mostek 48t02 real time clock and NVRAM chip. The registers + * other than the control register are in binary coded decimal. Some + * control bits also live outside the control register. + */ +#define mostek_read(_addr) readb(_addr) +#define mostek_write(_addr,_val) writeb(_val, _addr) +#define MOSTEK_EEPROM 0x0000UL +#define MOSTEK_IDPROM 0x07d8UL +#define MOSTEK_CREG 0x07f8UL +#define MOSTEK_SEC 0x07f9UL +#define MOSTEK_MIN 0x07faUL +#define MOSTEK_HOUR 0x07fbUL +#define MOSTEK_DOW 0x07fcUL +#define MOSTEK_DOM 0x07fdUL +#define MOSTEK_MONTH 0x07feUL +#define MOSTEK_YEAR 0x07ffUL + +struct mostek48t02 { + volatile char eeprom[2008]; /* This is the eeprom, don't touch! */ + struct idprom idprom; /* The idprom lives here. */ + volatile unsigned char creg; /* Control register */ + volatile unsigned char sec; /* Seconds (0-59) */ + volatile unsigned char min; /* Minutes (0-59) */ + volatile unsigned char hour; /* Hour (0-23) */ + volatile unsigned char dow; /* Day of the week (1-7) */ + volatile unsigned char dom; /* Day of the month (1-31) */ + volatile unsigned char month; /* Month of year (1-12) */ + volatile unsigned char year; /* Year (0-99) */ +}; + +extern spinlock_t mostek_lock; +extern void __iomem *mstk48t02_regs; + +/* Control register values. */ +#define MSTK_CREG_WRITE 0x80 /* Must set this before placing values. */ +#define MSTK_CREG_READ 0x40 /* Stop updates to allow a clean read. */ +#define MSTK_CREG_SIGN 0x20 /* Slow/speed clock in calibration mode. */ + +/* Control bits that live in the other registers. */ +#define MSTK_STOP 0x80 /* Stop the clock oscillator. (sec) */ +#define MSTK_KICK_START 0x80 /* Kick start the clock chip. (hour) */ +#define MSTK_FREQ_TEST 0x40 /* Frequency test mode. (day) */ + +#define MSTK_YEAR_ZERO 1968 /* If year reg has zero, it is 1968. */ +#define MSTK_CVT_YEAR(yr) ((yr) + MSTK_YEAR_ZERO) + +/* Masks that define how much space each value takes up. */ +#define MSTK_SEC_MASK 0x7f +#define MSTK_MIN_MASK 0x7f +#define MSTK_HOUR_MASK 0x3f +#define MSTK_DOW_MASK 0x07 +#define MSTK_DOM_MASK 0x3f +#define MSTK_MONTH_MASK 0x1f +#define MSTK_YEAR_MASK 0xff + +/* Binary coded decimal conversion macros. */ +#define MSTK_REGVAL_TO_DECIMAL(x) (((x) & 0x0F) + 0x0A * ((x) >> 0x04)) +#define MSTK_DECIMAL_TO_REGVAL(x) ((((x) / 0x0A) << 0x04) + ((x) % 0x0A)) + +/* Generic register set and get macros for internal use. */ +#define MSTK_GET(regs,var,mask) (MSTK_REGVAL_TO_DECIMAL(((struct mostek48t02 *)regs)->var & MSTK_ ## mask ## _MASK)) +#define MSTK_SET(regs,var,value,mask) do { ((struct mostek48t02 *)regs)->var &= ~(MSTK_ ## mask ## _MASK); ((struct mostek48t02 *)regs)->var |= MSTK_DECIMAL_TO_REGVAL(value) & (MSTK_ ## mask ## _MASK); } while (0) + +/* Macros to make register access easier on our fingers. These give you + * the decimal value of the register requested if applicable. You pass + * the a pointer to a 'struct mostek48t02'. + */ +#define MSTK_REG_CREG(regs) (((struct mostek48t02 *)regs)->creg) +#define MSTK_REG_SEC(regs) MSTK_GET(regs,sec,SEC) +#define MSTK_REG_MIN(regs) MSTK_GET(regs,min,MIN) +#define MSTK_REG_HOUR(regs) MSTK_GET(regs,hour,HOUR) +#define MSTK_REG_DOW(regs) MSTK_GET(regs,dow,DOW) +#define MSTK_REG_DOM(regs) MSTK_GET(regs,dom,DOM) +#define MSTK_REG_MONTH(regs) MSTK_GET(regs,month,MONTH) +#define MSTK_REG_YEAR(regs) MSTK_GET(regs,year,YEAR) + +#define MSTK_SET_REG_SEC(regs,value) MSTK_SET(regs,sec,value,SEC) +#define MSTK_SET_REG_MIN(regs,value) MSTK_SET(regs,min,value,MIN) +#define MSTK_SET_REG_HOUR(regs,value) MSTK_SET(regs,hour,value,HOUR) +#define MSTK_SET_REG_DOW(regs,value) MSTK_SET(regs,dow,value,DOW) +#define MSTK_SET_REG_DOM(regs,value) MSTK_SET(regs,dom,value,DOM) +#define MSTK_SET_REG_MONTH(regs,value) MSTK_SET(regs,month,value,MONTH) +#define MSTK_SET_REG_YEAR(regs,value) MSTK_SET(regs,year,value,YEAR) + + +/* The Mostek 48t08 clock chip. Found on Sun4m's I think. It has the + * same (basically) layout of the 48t02 chip except for the extra + * NVRAM on board (8 KB against the 48t02's 2 KB). + */ +struct mostek48t08 { + char offset[6*1024]; /* Magic things may be here, who knows? */ + struct mostek48t02 regs; /* Here is what we are interested in. */ +}; + +extern enum sparc_clock_type sp_clock_typ; + +#ifdef CONFIG_SUN4 +enum sparc_clock_type { MSTK48T02, MSTK48T08, \ +INTERSIL, MSTK_INVALID }; +#else +enum sparc_clock_type { MSTK48T02, MSTK48T08, \ +MSTK_INVALID }; +#endif + +#ifdef CONFIG_SUN4 +/* intersil on a sun 4/260 code data from harris doc */ +struct intersil_dt { + volatile unsigned char int_csec; + volatile unsigned char int_hour; + volatile unsigned char int_min; + volatile unsigned char int_sec; + volatile unsigned char int_month; + volatile unsigned char int_day; + volatile unsigned char int_year; + volatile unsigned char int_dow; +}; + +struct intersil { + struct intersil_dt clk; + struct intersil_dt cmp; + volatile unsigned char int_intr_reg; + volatile unsigned char int_cmd_reg; +}; + +#define INTERSIL_STOP 0x0 +#define INTERSIL_START 0x8 +#define INTERSIL_INTR_DISABLE 0x0 +#define INTERSIL_INTR_ENABLE 0x10 +#define INTERSIL_32K 0x0 +#define INTERSIL_NORMAL 0x0 +#define INTERSIL_24H 0x4 +#define INTERSIL_INT_100HZ 0x2 + +/* end of intersil info */ +#endif + +#endif /* !(_SPARC_MOSTEK_H) */ diff --git a/include/asm-sparc/mpmbox.h b/include/asm-sparc/mpmbox.h new file mode 100644 index 00000000000..0e1bc5801d8 --- /dev/null +++ b/include/asm-sparc/mpmbox.h @@ -0,0 +1,67 @@ +/* $Id: mpmbox.h,v 1.4 1996/04/25 06:13:19 davem Exp $ + * mpmbox.h: Interface and defines for the OpenProm mailbox + * facilities for MP machines under Linux. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef _SPARC_MPMBOX_H +#define _SPARC_MPMBOX_H + +/* The prom allocates, for each CPU on the machine an unsigned + * byte in physical ram. You probe the device tree prom nodes + * for these values. The purpose of this byte is to be able to + * pass messages from one cpu to another. + */ + +/* These are the main message types we have to look for in our + * Cpu mailboxes, based upon these values we decide what course + * of action to take. + */ + +/* The CPU is executing code in the kernel. */ +#define MAILBOX_ISRUNNING 0xf0 + +/* Another CPU called romvec->pv_exit(), you should call + * prom_stopcpu() when you see this in your mailbox. + */ +#define MAILBOX_EXIT 0xfb + +/* Another CPU called romvec->pv_enter(), you should call + * prom_cpuidle() when this is seen. + */ +#define MAILBOX_GOSPIN 0xfc + +/* Another CPU has hit a breakpoint either into kadb or the prom + * itself. Just like MAILBOX_GOSPIN, you should call prom_cpuidle() + * at this point. + */ +#define MAILBOX_BPT_SPIN 0xfd + +/* Oh geese, some other nitwit got a damn watchdog reset. The party's + * over so go call prom_stopcpu(). + */ +#define MAILBOX_WDOG_STOP 0xfe + +#ifndef __ASSEMBLY__ + +/* Handy macro's to determine a cpu's state. */ + +/* Is the cpu still in Power On Self Test? */ +#define MBOX_POST_P(letter) ((letter) >= 0x00 && (letter) <= 0x7f) + +/* Is the cpu at the 'ok' prompt of the PROM? */ +#define MBOX_PROMPROMPT_P(letter) ((letter) >= 0x80 && (letter) <= 0x8f) + +/* Is the cpu spinning in the PROM? */ +#define MBOX_PROMSPIN_P(letter) ((letter) >= 0x90 && (letter) <= 0xef) + +/* Sanity check... This is junk mail, throw it out. */ +#define MBOX_BOGON_P(letter) ((letter) >= 0xf1 && (letter) <= 0xfa) + +/* Is the cpu actively running an application/kernel-code? */ +#define MBOX_RUNNING_P(letter) ((letter) == MAILBOX_ISRUNNING) + +#endif /* !(__ASSEMBLY__) */ + +#endif /* !(_SPARC_MPMBOX_H) */ diff --git a/include/asm-sparc/msgbuf.h b/include/asm-sparc/msgbuf.h new file mode 100644 index 00000000000..8cec9ad0b82 --- /dev/null +++ b/include/asm-sparc/msgbuf.h @@ -0,0 +1,31 @@ +#ifndef _SPARC64_MSGBUF_H +#define _SPARC64_MSGBUF_H + +/* + * The msqid64_ds structure for sparc64 architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct msqid64_ds { + struct ipc64_perm msg_perm; + unsigned int __pad1; + __kernel_time_t msg_stime; /* last msgsnd time */ + unsigned int __pad2; + __kernel_time_t msg_rtime; /* last msgrcv time */ + unsigned int __pad3; + __kernel_time_t msg_ctime; /* last change time */ + unsigned long msg_cbytes; /* current number of bytes on queue */ + unsigned long msg_qnum; /* number of messages in queue */ + unsigned long msg_qbytes; /* max number of bytes on queue */ + __kernel_pid_t msg_lspid; /* pid of last msgsnd */ + __kernel_pid_t msg_lrpid; /* last receive pid */ + unsigned long __unused1; + unsigned long __unused2; +}; + +#endif /* _SPARC64_MSGBUF_H */ diff --git a/include/asm-sparc/msi.h b/include/asm-sparc/msi.h new file mode 100644 index 00000000000..b69543dd3b4 --- /dev/null +++ b/include/asm-sparc/msi.h @@ -0,0 +1,31 @@ +/* $Id: msi.h,v 1.3 1996/08/29 09:48:25 davem Exp $ + * msi.h: Defines specific to the MBus - Sbus - Interface. + * + * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu) + * Copyright (C) 1996 Eddie C. Dost (ecd@skynet.be) + */ + +#ifndef _SPARC_MSI_H +#define _SPARC_MSI_H + +/* + * Locations of MSI Registers. + */ +#define MSI_MBUS_ARBEN 0xe0001008 /* MBus Arbiter Enable register */ + +/* + * Useful bits in the MSI Registers. + */ +#define MSI_ASYNC_MODE 0x80000000 /* Operate the MSI asynchronously */ + + +extern __inline__ void msi_set_sync(void) +{ + __asm__ __volatile__ ("lda [%0] %1, %%g3\n\t" + "andn %%g3, %2, %%g3\n\t" + "sta %%g3, [%0] %1\n\t" : : + "r" (MSI_MBUS_ARBEN), + "i" (ASI_M_CTL), "r" (MSI_ASYNC_MODE) : "g3"); +} + +#endif /* !(_SPARC_MSI_H) */ diff --git a/include/asm-sparc/mxcc.h b/include/asm-sparc/mxcc.h new file mode 100644 index 00000000000..efe4e843122 --- /dev/null +++ b/include/asm-sparc/mxcc.h @@ -0,0 +1,137 @@ +/* $Id: mxcc.h,v 1.7 1997/04/20 14:11:46 ecd Exp $ + * mxcc.h: Definitions of the Viking MXCC registers + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef _SPARC_MXCC_H +#define _SPARC_MXCC_H + +/* These registers are accessed through ASI 0x2. */ +#define MXCC_DATSTREAM 0x1C00000 /* Data stream register */ +#define MXCC_SRCSTREAM 0x1C00100 /* Source stream register */ +#define MXCC_DESSTREAM 0x1C00200 /* Destination stream register */ +#define MXCC_RMCOUNT 0x1C00300 /* Count of references and misses */ +#define MXCC_STEST 0x1C00804 /* Internal self-test */ +#define MXCC_CREG 0x1C00A04 /* Control register */ +#define MXCC_SREG 0x1C00B00 /* Status register */ +#define MXCC_RREG 0x1C00C04 /* Reset register */ +#define MXCC_EREG 0x1C00E00 /* Error code register */ +#define MXCC_PREG 0x1C00F04 /* Address port register */ + +/* Some MXCC constants. */ +#define MXCC_STREAM_SIZE 0x20 /* Size in bytes of one stream r/w */ + +/* The MXCC Control Register: + * + * ---------------------------------------------------------------------- + * | | RRC | RSV |PRE|MCE|PARE|ECE|RSV| + * ---------------------------------------------------------------------- + * 31 10 9 8-6 5 4 3 2 1-0 + * + * RRC: Controls what you read from MXCC_RMCOUNT reg. + * 0=Misses 1=References + * PRE: Prefetch enable + * MCE: Multiple Command Enable + * PARE: Parity enable + * ECE: External cache enable + */ + +#define MXCC_CTL_RRC 0x00000200 +#define MXCC_CTL_PRE 0x00000020 +#define MXCC_CTL_MCE 0x00000010 +#define MXCC_CTL_PARE 0x00000008 +#define MXCC_CTL_ECE 0x00000004 + +/* The MXCC Error Register: + * + * -------------------------------------------------------- + * |ME| RSV|CE|PEW|PEE|ASE|EIV| MOPC|ECODE|PRIV|RSV|HPADDR| + * -------------------------------------------------------- + * 31 30 29 28 27 26 25 24-15 14-7 6 5-3 2-0 + * + * ME: Multiple Errors have occurred + * CE: Cache consistency Error + * PEW: Parity Error during a Write operation + * PEE: Parity Error involving the External cache + * ASE: ASynchronous Error + * EIV: This register is toast + * MOPC: MXCC Operation Code for instance causing error + * ECODE: The Error CODE + * PRIV: A privileged mode error? 0=no 1=yes + * HPADDR: High PhysicalADDRess bits (35-32) + */ + +#define MXCC_ERR_ME 0x80000000 +#define MXCC_ERR_CE 0x20000000 +#define MXCC_ERR_PEW 0x10000000 +#define MXCC_ERR_PEE 0x08000000 +#define MXCC_ERR_ASE 0x04000000 +#define MXCC_ERR_EIV 0x02000000 +#define MXCC_ERR_MOPC 0x01FF8000 +#define MXCC_ERR_ECODE 0x00007F80 +#define MXCC_ERR_PRIV 0x00000040 +#define MXCC_ERR_HPADDR 0x0000000f + +/* The MXCC Port register: + * + * ----------------------------------------------------- + * | | MID | | + * ----------------------------------------------------- + * 31 21 20-18 17 0 + * + * MID: The moduleID of the cpu your read this from. + */ + +#ifndef __ASSEMBLY__ + +extern __inline__ void mxcc_set_stream_src(unsigned long *paddr) +{ + unsigned long data0 = paddr[0]; + unsigned long data1 = paddr[1]; + + __asm__ __volatile__ ("or %%g0, %0, %%g2\n\t" + "or %%g0, %1, %%g3\n\t" + "stda %%g2, [%2] %3\n\t" : : + "r" (data0), "r" (data1), + "r" (MXCC_SRCSTREAM), + "i" (ASI_M_MXCC) : "g2", "g3"); +} + +extern __inline__ void mxcc_set_stream_dst(unsigned long *paddr) +{ + unsigned long data0 = paddr[0]; + unsigned long data1 = paddr[1]; + + __asm__ __volatile__ ("or %%g0, %0, %%g2\n\t" + "or %%g0, %1, %%g3\n\t" + "stda %%g2, [%2] %3\n\t" : : + "r" (data0), "r" (data1), + "r" (MXCC_DESSTREAM), + "i" (ASI_M_MXCC) : "g2", "g3"); +} + +extern __inline__ unsigned long mxcc_get_creg(void) +{ + unsigned long mxcc_control; + + __asm__ __volatile__("set -1, %%g2\n\t" + "set -1, %%g3\n\t" + "stda %%g2, [%1] %2\n\t" + "lda [%3] %2, %0\n\t" : + "=r" (mxcc_control) : + "r" (MXCC_EREG), "i" (ASI_M_MXCC), + "r" (MXCC_CREG) : "g2", "g3"); + return mxcc_control; +} + +extern __inline__ void mxcc_set_creg(unsigned long mxcc_control) +{ + __asm__ __volatile__("sta %0, [%1] %2\n\t" : : + "r" (mxcc_control), "r" (MXCC_CREG), + "i" (ASI_M_MXCC)); +} + +#endif /* !__ASSEMBLY__ */ + +#endif /* !(_SPARC_MXCC_H) */ diff --git a/include/asm-sparc/namei.h b/include/asm-sparc/namei.h new file mode 100644 index 00000000000..f2461e8a11a --- /dev/null +++ b/include/asm-sparc/namei.h @@ -0,0 +1,26 @@ +/* $Id: namei.h,v 1.16 2000/04/13 00:55:54 davem Exp $ + * linux/include/asm-sparc/namei.h + * + * Routines to handle famous /usr/gnemul/s*. + * Included from linux/fs/namei.c + */ + +#ifndef __SPARC_NAMEI_H +#define __SPARC_NAMEI_H + +#define SPARC_BSD_EMUL "/usr/gnemul/sunos/" +#define SPARC_SOL_EMUL "/usr/gnemul/solaris/" + +static inline char * __emul_prefix(void) +{ + switch (current->personality) { + case PER_SUNOS: + return SPARC_BSD_EMUL; + case PER_SVR4: + return SPARC_SOL_EMUL; + default: + return NULL; + } +} + +#endif /* __SPARC_NAMEI_H */ diff --git a/include/asm-sparc/obio.h b/include/asm-sparc/obio.h new file mode 100644 index 00000000000..62e1d77965f --- /dev/null +++ b/include/asm-sparc/obio.h @@ -0,0 +1,249 @@ +/* $Id: obio.h,v 1.4 1998/03/09 14:04:55 jj Exp $ + * obio.h: Some useful locations in 0xFXXXXXXXX PA obio space on sun4d. + * + * Copyright (C) 1997 Jakub Jelinek <jj@sunsite.mff.cuni.cz> + */ + +#ifndef _SPARC_OBIO_H +#define _SPARC_OBIO_H + +#include <asm/asi.h> + +/* This weird monster likes to use the very upper parts of + 36bit PA for these things :) */ + +/* CSR space (for each XDBUS) + * ------------------------------------------------------------------------ + * | 0xFE | DEVID | | XDBUS ID | | + * ------------------------------------------------------------------------ + * 35 28 27 20 19 10 9 8 7 0 + */ + +#define CSR_BASE_ADDR 0xe0000000 +#define CSR_CPU_SHIFT (32 - 4 - 5) +#define CSR_XDBUS_SHIFT 8 + +#define CSR_BASE(cpu) (((CSR_BASE_ADDR >> CSR_CPU_SHIFT) + cpu) << CSR_CPU_SHIFT) + +/* ECSR space (not for each XDBUS) + * ------------------------------------------------------------------------ + * | 0xF | DEVID[7:1] | | + * ------------------------------------------------------------------------ + * 35 32 31 25 24 0 + */ + +#define ECSR_BASE_ADDR 0x00000000 +#define ECSR_CPU_SHIFT (32 - 5) +#define ECSR_DEV_SHIFT (32 - 8) + +#define ECSR_BASE(cpu) ((cpu) << ECSR_CPU_SHIFT) +#define ECSR_DEV_BASE(devid) ((devid) << ECSR_DEV_SHIFT) + +/* Bus Watcher */ +#define BW_LOCAL_BASE 0xfff00000 + +#define BW_CID 0x00000000 +#define BW_DBUS_CTRL 0x00000008 +#define BW_DBUS_DATA 0x00000010 +#define BW_CTRL 0x00001000 +#define BW_INTR_TABLE 0x00001040 +#define BW_INTR_TABLE_CLEAR 0x00001080 +#define BW_PRESCALER 0x000010c0 +#define BW_PTIMER_LIMIT 0x00002000 +#define BW_PTIMER_COUNTER2 0x00002004 +#define BW_PTIMER_NDLIMIT 0x00002008 +#define BW_PTIMER_CTRL 0x0000200c +#define BW_PTIMER_COUNTER 0x00002010 +#define BW_TIMER_LIMIT 0x00003000 +#define BW_TIMER_COUNTER2 0x00003004 +#define BW_TIMER_NDLIMIT 0x00003008 +#define BW_TIMER_CTRL 0x0000300c +#define BW_TIMER_COUNTER 0x00003010 + +/* BW Control */ +#define BW_CTRL_USER_TIMER 0x00000004 /* Is User Timer Free run enabled */ + +/* Boot Bus */ +#define BB_LOCAL_BASE 0xf0000000 + +#define BB_STAT1 0x00100000 +#define BB_STAT2 0x00120000 +#define BB_STAT3 0x00140000 +#define BB_LEDS 0x002e0000 + +/* Bits in BB_STAT2 */ +#define BB_STAT2_AC_INTR 0x04 /* Aiee! 5ms and power is gone... */ +#define BB_STAT2_TMP_INTR 0x10 /* My Penguins are burning. Are you able to smell it? */ +#define BB_STAT2_FAN_INTR 0x20 /* My fan refuses to work */ +#define BB_STAT2_PWR_INTR 0x40 /* On SC2000, one of the two ACs died. Ok, we go on... */ +#define BB_STAT2_MASK (BB_STAT2_AC_INTR|BB_STAT2_TMP_INTR|BB_STAT2_FAN_INTR|BB_STAT2_PWR_INTR) + +/* Cache Controller */ +#define CC_BASE 0x1F00000 +#define CC_DATSTREAM 0x1F00000 /* Data stream register */ +#define CC_DATSIZE 0x1F0003F /* Size */ +#define CC_SRCSTREAM 0x1F00100 /* Source stream register */ +#define CC_DESSTREAM 0x1F00200 /* Destination stream register */ +#define CC_RMCOUNT 0x1F00300 /* Count of references and misses */ +#define CC_IPEN 0x1F00406 /* Pending Interrupts */ +#define CC_IMSK 0x1F00506 /* Interrupt Mask */ +#define CC_ICLR 0x1F00606 /* Clear pending Interrupts */ +#define CC_IGEN 0x1F00704 /* Generate Interrupt register */ +#define CC_STEST 0x1F00804 /* Internal self-test */ +#define CC_CREG 0x1F00A04 /* Control register */ +#define CC_SREG 0x1F00B00 /* Status register */ +#define CC_RREG 0x1F00C04 /* Reset register */ +#define CC_EREG 0x1F00E00 /* Error code register */ +#define CC_CID 0x1F00F04 /* Component ID */ + +#ifndef __ASSEMBLY__ + +extern __inline__ int bw_get_intr_mask(int sbus_level) +{ + int mask; + + __asm__ __volatile__ ("lduha [%1] %2, %0" : + "=r" (mask) : + "r" (BW_LOCAL_BASE + BW_INTR_TABLE + (sbus_level << 3)), + "i" (ASI_M_CTL)); + return mask; +} + +extern __inline__ void bw_clear_intr_mask(int sbus_level, int mask) +{ + __asm__ __volatile__ ("stha %0, [%1] %2" : : + "r" (mask), + "r" (BW_LOCAL_BASE + BW_INTR_TABLE_CLEAR + (sbus_level << 3)), + "i" (ASI_M_CTL)); +} + +extern __inline__ unsigned bw_get_prof_limit(int cpu) +{ + unsigned limit; + + __asm__ __volatile__ ("lda [%1] %2, %0" : + "=r" (limit) : + "r" (CSR_BASE(cpu) + BW_PTIMER_LIMIT), + "i" (ASI_M_CTL)); + return limit; +} + +extern __inline__ void bw_set_prof_limit(int cpu, unsigned limit) +{ + __asm__ __volatile__ ("sta %0, [%1] %2" : : + "r" (limit), + "r" (CSR_BASE(cpu) + BW_PTIMER_LIMIT), + "i" (ASI_M_CTL)); +} + +extern __inline__ unsigned bw_get_ctrl(int cpu) +{ + unsigned ctrl; + + __asm__ __volatile__ ("lda [%1] %2, %0" : + "=r" (ctrl) : + "r" (CSR_BASE(cpu) + BW_CTRL), + "i" (ASI_M_CTL)); + return ctrl; +} + +extern __inline__ void bw_set_ctrl(int cpu, unsigned ctrl) +{ + __asm__ __volatile__ ("sta %0, [%1] %2" : : + "r" (ctrl), + "r" (CSR_BASE(cpu) + BW_CTRL), + "i" (ASI_M_CTL)); +} + +extern unsigned char cpu_leds[32]; + +extern __inline__ void show_leds(int cpuid) +{ + cpuid &= 0x1e; + __asm__ __volatile__ ("stba %0, [%1] %2" : : + "r" ((cpu_leds[cpuid] << 4) | cpu_leds[cpuid+1]), + "r" (ECSR_BASE(cpuid) | BB_LEDS), + "i" (ASI_M_CTL)); +} + +extern __inline__ unsigned cc_get_ipen(void) +{ + unsigned pending; + + __asm__ __volatile__ ("lduha [%1] %2, %0" : + "=r" (pending) : + "r" (CC_IPEN), + "i" (ASI_M_MXCC)); + return pending; +} + +extern __inline__ void cc_set_iclr(unsigned clear) +{ + __asm__ __volatile__ ("stha %0, [%1] %2" : : + "r" (clear), + "r" (CC_ICLR), + "i" (ASI_M_MXCC)); +} + +extern __inline__ unsigned cc_get_imsk(void) +{ + unsigned mask; + + __asm__ __volatile__ ("lduha [%1] %2, %0" : + "=r" (mask) : + "r" (CC_IMSK), + "i" (ASI_M_MXCC)); + return mask; +} + +extern __inline__ void cc_set_imsk(unsigned mask) +{ + __asm__ __volatile__ ("stha %0, [%1] %2" : : + "r" (mask), + "r" (CC_IMSK), + "i" (ASI_M_MXCC)); +} + +extern __inline__ unsigned cc_get_imsk_other(int cpuid) +{ + unsigned mask; + + __asm__ __volatile__ ("lduha [%1] %2, %0" : + "=r" (mask) : + "r" (ECSR_BASE(cpuid) | CC_IMSK), + "i" (ASI_M_CTL)); + return mask; +} + +extern __inline__ void cc_set_imsk_other(int cpuid, unsigned mask) +{ + __asm__ __volatile__ ("stha %0, [%1] %2" : : + "r" (mask), + "r" (ECSR_BASE(cpuid) | CC_IMSK), + "i" (ASI_M_CTL)); +} + +extern __inline__ void cc_set_igen(unsigned gen) +{ + __asm__ __volatile__ ("sta %0, [%1] %2" : : + "r" (gen), + "r" (CC_IGEN), + "i" (ASI_M_MXCC)); +} + +/* +-------+-------------+-----------+------------------------------------+ + * | bcast | devid | sid | levels mask | + * +-------+-------------+-----------+------------------------------------+ + * 31 30 23 22 15 14 0 + */ +#define IGEN_MESSAGE(bcast, devid, sid, levels) \ + (((bcast) << 31) | ((devid) << 23) | ((sid) << 15) | (levels)) + +extern __inline__ void sun4d_send_ipi(int cpu, int level) +{ + cc_set_igen(IGEN_MESSAGE(0, cpu << 3, 6 + ((level >> 1) & 7), 1 << (level - 1))); +} + +#endif /* !__ASSEMBLY__ */ + +#endif /* !(_SPARC_OBIO_H) */ diff --git a/include/asm-sparc/openprom.h b/include/asm-sparc/openprom.h new file mode 100644 index 00000000000..12929a20f53 --- /dev/null +++ b/include/asm-sparc/openprom.h @@ -0,0 +1,258 @@ +/* $Id: openprom.h,v 1.24 2000/06/04 06:23:53 anton Exp $ */ +#ifndef __SPARC_OPENPROM_H +#define __SPARC_OPENPROM_H + +/* openprom.h: Prom structures and defines for access to the OPENBOOT + * prom routines and data areas. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + +#include <asm/vaddrs.h> + +/* Empirical constants... */ +#define LINUX_OPPROM_MAGIC 0x10010407 + +#ifndef __ASSEMBLY__ +/* V0 prom device operations. */ +struct linux_dev_v0_funcs { + int (*v0_devopen)(char *device_str); + int (*v0_devclose)(int dev_desc); + int (*v0_rdblkdev)(int dev_desc, int num_blks, int blk_st, char *buf); + int (*v0_wrblkdev)(int dev_desc, int num_blks, int blk_st, char *buf); + int (*v0_wrnetdev)(int dev_desc, int num_bytes, char *buf); + int (*v0_rdnetdev)(int dev_desc, int num_bytes, char *buf); + int (*v0_rdchardev)(int dev_desc, int num_bytes, int dummy, char *buf); + int (*v0_wrchardev)(int dev_desc, int num_bytes, int dummy, char *buf); + int (*v0_seekdev)(int dev_desc, long logical_offst, int from); +}; + +/* V2 and later prom device operations. */ +struct linux_dev_v2_funcs { + int (*v2_inst2pkg)(int d); /* Convert ihandle to phandle */ + char * (*v2_dumb_mem_alloc)(char *va, unsigned sz); + void (*v2_dumb_mem_free)(char *va, unsigned sz); + + /* To map devices into virtual I/O space. */ + char * (*v2_dumb_mmap)(char *virta, int which_io, unsigned paddr, unsigned sz); + void (*v2_dumb_munmap)(char *virta, unsigned size); + + int (*v2_dev_open)(char *devpath); + void (*v2_dev_close)(int d); + int (*v2_dev_read)(int d, char *buf, int nbytes); + int (*v2_dev_write)(int d, char *buf, int nbytes); + int (*v2_dev_seek)(int d, int hi, int lo); + + /* Never issued (multistage load support) */ + void (*v2_wheee2)(void); + void (*v2_wheee3)(void); +}; + +struct linux_mlist_v0 { + struct linux_mlist_v0 *theres_more; + char *start_adr; + unsigned num_bytes; +}; + +struct linux_mem_v0 { + struct linux_mlist_v0 **v0_totphys; + struct linux_mlist_v0 **v0_prommap; + struct linux_mlist_v0 **v0_available; /* What we can use */ +}; + +/* Arguments sent to the kernel from the boot prompt. */ +struct linux_arguments_v0 { + char *argv[8]; + char args[100]; + char boot_dev[2]; + int boot_dev_ctrl; + int boot_dev_unit; + int dev_partition; + char *kernel_file_name; + void *aieee1; /* XXX */ +}; + +/* V2 and up boot things. */ +struct linux_bootargs_v2 { + char **bootpath; + char **bootargs; + int *fd_stdin; + int *fd_stdout; +}; + +/* The top level PROM vector. */ +struct linux_romvec { + /* Version numbers. */ + unsigned int pv_magic_cookie; + unsigned int pv_romvers; + unsigned int pv_plugin_revision; + unsigned int pv_printrev; + + /* Version 0 memory descriptors. */ + struct linux_mem_v0 pv_v0mem; + + /* Node operations. */ + struct linux_nodeops *pv_nodeops; + + char **pv_bootstr; + struct linux_dev_v0_funcs pv_v0devops; + + char *pv_stdin; + char *pv_stdout; +#define PROMDEV_KBD 0 /* input from keyboard */ +#define PROMDEV_SCREEN 0 /* output to screen */ +#define PROMDEV_TTYA 1 /* in/out to ttya */ +#define PROMDEV_TTYB 2 /* in/out to ttyb */ + + /* Blocking getchar/putchar. NOT REENTRANT! (grr) */ + int (*pv_getchar)(void); + void (*pv_putchar)(int ch); + + /* Non-blocking variants. */ + int (*pv_nbgetchar)(void); + int (*pv_nbputchar)(int ch); + + void (*pv_putstr)(char *str, int len); + + /* Miscellany. */ + void (*pv_reboot)(char *bootstr); + void (*pv_printf)(__const__ char *fmt, ...); + void (*pv_abort)(void); + __volatile__ int *pv_ticks; + void (*pv_halt)(void); + void (**pv_synchook)(void); + + /* Evaluate a forth string, not different proto for V0 and V2->up. */ + union { + void (*v0_eval)(int len, char *str); + void (*v2_eval)(char *str); + } pv_fortheval; + + struct linux_arguments_v0 **pv_v0bootargs; + + /* Get ether address. */ + unsigned int (*pv_enaddr)(int d, char *enaddr); + + struct linux_bootargs_v2 pv_v2bootargs; + struct linux_dev_v2_funcs pv_v2devops; + + int filler[15]; + + /* This one is sun4c/sun4 only. */ + void (*pv_setctxt)(int ctxt, char *va, int pmeg); + + /* Prom version 3 Multiprocessor routines. This stuff is crazy. + * No joke. Calling these when there is only one cpu probably + * crashes the machine, have to test this. :-) + */ + + /* v3_cpustart() will start the cpu 'whichcpu' in mmu-context + * 'thiscontext' executing at address 'prog_counter' + */ + int (*v3_cpustart)(unsigned int whichcpu, int ctxtbl_ptr, + int thiscontext, char *prog_counter); + + /* v3_cpustop() will cause cpu 'whichcpu' to stop executing + * until a resume cpu call is made. + */ + int (*v3_cpustop)(unsigned int whichcpu); + + /* v3_cpuidle() will idle cpu 'whichcpu' until a stop or + * resume cpu call is made. + */ + int (*v3_cpuidle)(unsigned int whichcpu); + + /* v3_cpuresume() will resume processor 'whichcpu' executing + * starting with whatever 'pc' and 'npc' were left at the + * last 'idle' or 'stop' call. + */ + int (*v3_cpuresume)(unsigned int whichcpu); +}; + +/* Routines for traversing the prom device tree. */ +struct linux_nodeops { + int (*no_nextnode)(int node); + int (*no_child)(int node); + int (*no_proplen)(int node, char *name); + int (*no_getprop)(int node, char *name, char *val); + int (*no_setprop)(int node, char *name, char *val, int len); + char * (*no_nextprop)(int node, char *name); +}; + +/* More fun PROM structures for device probing. */ +#define PROMREG_MAX 16 +#define PROMVADDR_MAX 16 +#define PROMINTR_MAX 15 + +struct linux_prom_registers { + unsigned int which_io; /* is this in OBIO space? */ + unsigned int phys_addr; /* The physical address of this register */ + unsigned int reg_size; /* How many bytes does this register take up? */ +}; + +struct linux_prom_irqs { + int pri; /* IRQ priority */ + int vector; /* This is foobar, what does it do? */ +}; + +/* Element of the "ranges" vector */ +struct linux_prom_ranges { + unsigned int ot_child_space; + unsigned int ot_child_base; /* Bus feels this */ + unsigned int ot_parent_space; + unsigned int ot_parent_base; /* CPU looks from here */ + unsigned int or_size; +}; + +/* Ranges and reg properties are a bit different for PCI. */ +struct linux_prom_pci_registers { + /* + * We don't know what information this field contain. + * We guess, PCI device function is in bits 15:8 + * So, ... + */ + unsigned int which_io; /* Let it be which_io */ + + unsigned int phys_hi; + unsigned int phys_lo; + + unsigned int size_hi; + unsigned int size_lo; +}; + +struct linux_prom_pci_ranges { + unsigned int child_phys_hi; /* Only certain bits are encoded here. */ + unsigned int child_phys_mid; + unsigned int child_phys_lo; + + unsigned int parent_phys_hi; + unsigned int parent_phys_lo; + + unsigned int size_hi; + unsigned int size_lo; +}; + +struct linux_prom_pci_assigned_addresses { + unsigned int which_io; + + unsigned int phys_hi; + unsigned int phys_lo; + + unsigned int size_hi; + unsigned int size_lo; +}; + +struct linux_prom_ebus_ranges { + unsigned int child_phys_hi; + unsigned int child_phys_lo; + + unsigned int parent_phys_hi; + unsigned int parent_phys_mid; + unsigned int parent_phys_lo; + + unsigned int size; +}; + +#endif /* !(__ASSEMBLY__) */ + +#endif /* !(__SPARC_OPENPROM_H) */ diff --git a/include/asm-sparc/openpromio.h b/include/asm-sparc/openpromio.h new file mode 100644 index 00000000000..917fb8e9c63 --- /dev/null +++ b/include/asm-sparc/openpromio.h @@ -0,0 +1,69 @@ +#ifndef _SPARC_OPENPROMIO_H +#define _SPARC_OPENPROMIO_H + +#include <linux/compiler.h> +#include <linux/ioctl.h> +#include <linux/types.h> + +/* + * SunOS and Solaris /dev/openprom definitions. The ioctl values + * were chosen to be exactly equal to the SunOS equivalents. + */ + +struct openpromio +{ + u_int oprom_size; /* Actual size of the oprom_array. */ + char oprom_array[1]; /* Holds property names and values. */ +}; + +#define OPROMMAXPARAM 4096 /* Maximum size of oprom_array. */ + +#define OPROMGETOPT 0x20004F01 +#define OPROMSETOPT 0x20004F02 +#define OPROMNXTOPT 0x20004F03 +#define OPROMSETOPT2 0x20004F04 +#define OPROMNEXT 0x20004F05 +#define OPROMCHILD 0x20004F06 +#define OPROMGETPROP 0x20004F07 +#define OPROMNXTPROP 0x20004F08 +#define OPROMU2P 0x20004F09 +#define OPROMGETCONS 0x20004F0A +#define OPROMGETFBNAME 0x20004F0B +#define OPROMGETBOOTARGS 0x20004F0C +/* Linux extensions */ /* Arguments in oprom_array: */ +#define OPROMSETCUR 0x20004FF0 /* int node - Sets current node */ +#define OPROMPCI2NODE 0x20004FF1 /* int pci_bus, pci_devfn - Sets current node to PCI device's node */ +#define OPROMPATH2NODE 0x20004FF2 /* char path[] - Set current node from fully qualified PROM path */ + +/* + * Return values from OPROMGETCONS: + */ + +#define OPROMCONS_NOT_WSCONS 0 +#define OPROMCONS_STDIN_IS_KBD 0x1 /* stdin device is kbd */ +#define OPROMCONS_STDOUT_IS_FB 0x2 /* stdout is a framebuffer */ +#define OPROMCONS_OPENPROM 0x4 /* supports openboot */ + + +/* + * NetBSD/OpenBSD /dev/openprom definitions. + */ + +struct opiocdesc +{ + int op_nodeid; /* PROM Node ID (value-result) */ + int op_namelen; /* Length of op_name. */ + char __user *op_name; /* Pointer to the property name. */ + int op_buflen; /* Length of op_buf (value-result) */ + char __user *op_buf; /* Pointer to buffer. */ +}; + +#define OPIOCGET _IOWR('O', 1, struct opiocdesc) +#define OPIOCSET _IOW('O', 2, struct opiocdesc) +#define OPIOCNEXTPROP _IOWR('O', 3, struct opiocdesc) +#define OPIOCGETOPTNODE _IOR('O', 4, int) +#define OPIOCGETNEXT _IOWR('O', 5, int) +#define OPIOCGETCHILD _IOWR('O', 6, int) + +#endif /* _SPARC_OPENPROMIO_H */ + diff --git a/include/asm-sparc/oplib.h b/include/asm-sparc/oplib.h new file mode 100644 index 00000000000..95944556d8b --- /dev/null +++ b/include/asm-sparc/oplib.h @@ -0,0 +1,317 @@ +/* $Id: oplib.h,v 1.23 2001/12/21 00:54:31 davem Exp $ + * oplib.h: Describes the interface and available routines in the + * Linux Prom library. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef __SPARC_OPLIB_H +#define __SPARC_OPLIB_H + +#include <asm/openprom.h> +#include <linux/spinlock.h> +#include <linux/compiler.h> + +/* The master romvec pointer... */ +extern struct linux_romvec *romvec; + +/* Enumeration to describe the prom major version we have detected. */ +enum prom_major_version { + PROM_V0, /* Original sun4c V0 prom */ + PROM_V2, /* sun4c and early sun4m V2 prom */ + PROM_V3, /* sun4m and later, up to sun4d/sun4e machines V3 */ + PROM_P1275, /* IEEE compliant ISA based Sun PROM, only sun4u */ + PROM_AP1000, /* actually no prom at all */ + PROM_SUN4, /* Old sun4 proms are totally different, but we'll shoehorn it to make it fit */ +}; + +extern enum prom_major_version prom_vers; +/* Revision, and firmware revision. */ +extern unsigned int prom_rev, prom_prev; + +/* Root node of the prom device tree, this stays constant after + * initialization is complete. + */ +extern int prom_root_node; + +/* PROM stdin and stdout */ +extern int prom_stdin, prom_stdout; + +/* Pointer to prom structure containing the device tree traversal + * and usage utility functions. Only prom-lib should use these, + * users use the interface defined by the library only! + */ +extern struct linux_nodeops *prom_nodeops; + +/* The functions... */ + +/* You must call prom_init() before using any of the library services, + * preferably as early as possible. Pass it the romvec pointer. + */ +extern void prom_init(struct linux_romvec *rom_ptr); + +/* Boot argument acquisition, returns the boot command line string. */ +extern char *prom_getbootargs(void); + +/* Device utilities. */ + +/* Map and unmap devices in IO space at virtual addresses. Note that the + * virtual address you pass is a request and the prom may put your mappings + * somewhere else, so check your return value as that is where your new + * mappings really are! + * + * Another note, these are only available on V2 or higher proms! + */ +extern char *prom_mapio(char *virt_hint, int io_space, unsigned int phys_addr, unsigned int num_bytes); +extern void prom_unmapio(char *virt_addr, unsigned int num_bytes); + +/* Device operations. */ + +/* Open the device described by the passed string. Note, that the format + * of the string is different on V0 vs. V2->higher proms. The caller must + * know what he/she is doing! Returns the device descriptor, an int. + */ +extern int prom_devopen(char *device_string); + +/* Close a previously opened device described by the passed integer + * descriptor. + */ +extern int prom_devclose(int device_handle); + +/* Do a seek operation on the device described by the passed integer + * descriptor. + */ +extern void prom_seek(int device_handle, unsigned int seek_hival, + unsigned int seek_lowval); + +/* Machine memory configuration routine. */ + +/* This function returns a V0 format memory descriptor table, it has three + * entries. One for the total amount of physical ram on the machine, one + * for the amount of physical ram available, and one describing the virtual + * areas which are allocated by the prom. So, in a sense the physical + * available is a calculation of the total physical minus the physical mapped + * by the prom with virtual mappings. + * + * These lists are returned pre-sorted, this should make your life easier + * since the prom itself is way too lazy to do such nice things. + */ +extern struct linux_mem_v0 *prom_meminfo(void); + +/* Miscellaneous routines, don't really fit in any category per se. */ + +/* Reboot the machine with the command line passed. */ +extern void prom_reboot(char *boot_command); + +/* Evaluate the forth string passed. */ +extern void prom_feval(char *forth_string); + +/* Enter the prom, with possibility of continuation with the 'go' + * command in newer proms. + */ +extern void prom_cmdline(void); + +/* Enter the prom, with no chance of continuation for the stand-alone + * which calls this. + */ +extern void prom_halt(void) __attribute__ ((noreturn)); + +/* Set the PROM 'sync' callback function to the passed function pointer. + * When the user gives the 'sync' command at the prom prompt while the + * kernel is still active, the prom will call this routine. + * + * XXX The arguments are different on V0 vs. V2->higher proms, grrr! XXX + */ +typedef void (*sync_func_t)(void); +extern void prom_setsync(sync_func_t func_ptr); + +/* Acquire the IDPROM of the root node in the prom device tree. This + * gets passed a buffer where you would like it stuffed. The return value + * is the format type of this idprom or 0xff on error. + */ +extern unsigned char prom_get_idprom(char *idp_buffer, int idpbuf_size); + +/* Get the prom major version. */ +extern int prom_version(void); + +/* Get the prom plugin revision. */ +extern int prom_getrev(void); + +/* Get the prom firmware revision. */ +extern int prom_getprev(void); + +/* Character operations to/from the console.... */ + +/* Non-blocking get character from console. */ +extern int prom_nbgetchar(void); + +/* Non-blocking put character to console. */ +extern int prom_nbputchar(char character); + +/* Blocking get character from console. */ +extern char prom_getchar(void); + +/* Blocking put character to console. */ +extern void prom_putchar(char character); + +/* Prom's internal routines, don't use in kernel/boot code. */ +extern void prom_printf(char *fmt, ...); +extern void prom_write(const char *buf, unsigned int len); + +/* Query for input device type */ + +enum prom_input_device { + PROMDEV_IKBD, /* input from keyboard */ + PROMDEV_ITTYA, /* input from ttya */ + PROMDEV_ITTYB, /* input from ttyb */ + PROMDEV_I_UNK, +}; + +extern enum prom_input_device prom_query_input_device(void); + +/* Query for output device type */ + +enum prom_output_device { + PROMDEV_OSCREEN, /* to screen */ + PROMDEV_OTTYA, /* to ttya */ + PROMDEV_OTTYB, /* to ttyb */ + PROMDEV_O_UNK, +}; + +extern enum prom_output_device prom_query_output_device(void); + +/* Multiprocessor operations... */ + +/* Start the CPU with the given device tree node, context table, and context + * at the passed program counter. + */ +extern int prom_startcpu(int cpunode, struct linux_prom_registers *context_table, + int context, char *program_counter); + +/* Stop the CPU with the passed device tree node. */ +extern int prom_stopcpu(int cpunode); + +/* Idle the CPU with the passed device tree node. */ +extern int prom_idlecpu(int cpunode); + +/* Re-Start the CPU with the passed device tree node. */ +extern int prom_restartcpu(int cpunode); + +/* PROM memory allocation facilities... */ + +/* Allocated at possibly the given virtual address a chunk of the + * indicated size. + */ +extern char *prom_alloc(char *virt_hint, unsigned int size); + +/* Free a previously allocated chunk. */ +extern void prom_free(char *virt_addr, unsigned int size); + +/* Sun4/sun4c specific memory-management startup hook. */ + +/* Map the passed segment in the given context at the passed + * virtual address. + */ +extern void prom_putsegment(int context, unsigned long virt_addr, + int physical_segment); + + +/* PROM device tree traversal functions... */ + +#ifdef PROMLIB_INTERNAL + +/* Internal version of prom_getchild. */ +extern int __prom_getchild(int parent_node); + +/* Internal version of prom_getsibling. */ +extern int __prom_getsibling(int node); + +#endif + + +/* Get the child node of the given node, or zero if no child exists. */ +extern int prom_getchild(int parent_node); + +/* Get the next sibling node of the given node, or zero if no further + * siblings exist. + */ +extern int prom_getsibling(int node); + +/* Get the length, at the passed node, of the given property type. + * Returns -1 on error (ie. no such property at this node). + */ +extern int prom_getproplen(int thisnode, char *property); + +/* Fetch the requested property using the given buffer. Returns + * the number of bytes the prom put into your buffer or -1 on error. + */ +extern int __must_check prom_getproperty(int thisnode, char *property, + char *prop_buffer, int propbuf_size); + +/* Acquire an integer property. */ +extern int prom_getint(int node, char *property); + +/* Acquire an integer property, with a default value. */ +extern int prom_getintdefault(int node, char *property, int defval); + +/* Acquire a boolean property, 0=FALSE 1=TRUE. */ +extern int prom_getbool(int node, char *prop); + +/* Acquire a string property, null string on error. */ +extern void prom_getstring(int node, char *prop, char *buf, int bufsize); + +/* Does the passed node have the given "name"? YES=1 NO=0 */ +extern int prom_nodematch(int thisnode, char *name); + +/* Puts in buffer a prom name in the form name@x,y or name (x for which_io + * and y for first regs phys address + */ +extern int prom_getname(int node, char *buf, int buflen); + +/* Search all siblings starting at the passed node for "name" matching + * the given string. Returns the node on success, zero on failure. + */ +extern int prom_searchsiblings(int node_start, char *name); + +/* Return the first property type, as a string, for the given node. + * Returns a null string on error. + */ +extern char *prom_firstprop(int node, char *buffer); + +/* Returns the next property after the passed property for the given + * node. Returns null string on failure. + */ +extern char *prom_nextprop(int node, char *prev_property, char *buffer); + +/* Returns phandle of the path specified */ +extern int prom_finddevice(char *name); + +/* Returns 1 if the specified node has given property. */ +extern int prom_node_has_property(int node, char *property); + +/* Set the indicated property at the given node with the passed value. + * Returns the number of bytes of your value that the prom took. + */ +extern int prom_setprop(int node, char *prop_name, char *prop_value, + int value_size); + +extern int prom_pathtoinode(char *path); +extern int prom_inst2pkg(int); + +/* Dorking with Bus ranges... */ + +/* Apply promlib probes OBIO ranges to registers. */ +extern void prom_apply_obio_ranges(struct linux_prom_registers *obioregs, int nregs); + +/* Apply ranges of any prom node (and optionally parent node as well) to registers. */ +extern void prom_apply_generic_ranges(int node, int parent, + struct linux_prom_registers *sbusregs, int nregs); + +/* CPU probing helpers. */ +int cpu_find_by_instance(int instance, int *prom_node, int *mid); +int cpu_find_by_mid(int mid, int *prom_node); +int cpu_get_hwmid(int prom_node); + +extern spinlock_t prom_lock; + +#endif /* !(__SPARC_OPLIB_H) */ diff --git a/include/asm-sparc/page.h b/include/asm-sparc/page.h new file mode 100644 index 00000000000..383060e90d9 --- /dev/null +++ b/include/asm-sparc/page.h @@ -0,0 +1,181 @@ +/* $Id: page.h,v 1.55 2000/10/30 21:01:41 davem Exp $ + * page.h: Various defines and such for MMU operations on the Sparc for + * the Linux kernel. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef _SPARC_PAGE_H +#define _SPARC_PAGE_H + +#include <linux/config.h> +#ifdef CONFIG_SUN4 +#define PAGE_SHIFT 13 +#else +#define PAGE_SHIFT 12 +#endif +#ifndef __ASSEMBLY__ +/* I have my suspicions... -DaveM */ +#define PAGE_SIZE (1UL << PAGE_SHIFT) +#else +#define PAGE_SIZE (1 << PAGE_SHIFT) +#endif +#define PAGE_MASK (~(PAGE_SIZE-1)) + +#ifdef __KERNEL__ + +#include <asm/btfixup.h> + +#ifndef __ASSEMBLY__ + +#define clear_page(page) memset((void *)(page), 0, PAGE_SIZE) +#define copy_page(to,from) memcpy((void *)(to), (void *)(from), PAGE_SIZE) +#define clear_user_page(addr, vaddr, page) \ + do { clear_page(addr); \ + sparc_flush_page_to_ram(page); \ + } while (0) +#define copy_user_page(to, from, vaddr, page) \ + do { copy_page(to, from); \ + sparc_flush_page_to_ram(page); \ + } while (0) + +/* The following structure is used to hold the physical + * memory configuration of the machine. This is filled in + * probe_memory() and is later used by mem_init() to set up + * mem_map[]. We statically allocate SPARC_PHYS_BANKS of + * these structs, this is arbitrary. The entry after the + * last valid one has num_bytes==0. + */ + +struct sparc_phys_banks { + unsigned long base_addr; + unsigned long num_bytes; +}; + +#define SPARC_PHYS_BANKS 32 + +extern struct sparc_phys_banks sp_banks[SPARC_PHYS_BANKS+1]; + +/* Cache alias structure. Entry is valid if context != -1. */ +struct cache_palias { + unsigned long vaddr; + int context; +}; + +extern struct cache_palias *sparc_aliases; + +/* passing structs on the Sparc slow us down tremendously... */ + +/* #define STRICT_MM_TYPECHECKS */ + +#ifdef STRICT_MM_TYPECHECKS +/* + * These are used to make use of C type-checking.. + */ +typedef struct { unsigned long pte; } pte_t; +typedef struct { unsigned long iopte; } iopte_t; +typedef struct { unsigned long pmdv[16]; } pmd_t; +typedef struct { unsigned long pgd; } pgd_t; +typedef struct { unsigned long ctxd; } ctxd_t; +typedef struct { unsigned long pgprot; } pgprot_t; +typedef struct { unsigned long iopgprot; } iopgprot_t; + +#define pte_val(x) ((x).pte) +#define iopte_val(x) ((x).iopte) +#define pmd_val(x) ((x).pmdv[0]) +#define pgd_val(x) ((x).pgd) +#define ctxd_val(x) ((x).ctxd) +#define pgprot_val(x) ((x).pgprot) +#define iopgprot_val(x) ((x).iopgprot) + +#define __pte(x) ((pte_t) { (x) } ) +#define __iopte(x) ((iopte_t) { (x) } ) +/* #define __pmd(x) ((pmd_t) { (x) } ) */ /* XXX procedure with loop */ +#define __pgd(x) ((pgd_t) { (x) } ) +#define __ctxd(x) ((ctxd_t) { (x) } ) +#define __pgprot(x) ((pgprot_t) { (x) } ) +#define __iopgprot(x) ((iopgprot_t) { (x) } ) + +#else +/* + * .. while these make it easier on the compiler + */ +typedef unsigned long pte_t; +typedef unsigned long iopte_t; +typedef struct { unsigned long pmdv[16]; } pmd_t; +typedef unsigned long pgd_t; +typedef unsigned long ctxd_t; +typedef unsigned long pgprot_t; +typedef unsigned long iopgprot_t; + +#define pte_val(x) (x) +#define iopte_val(x) (x) +#define pmd_val(x) ((x).pmdv[0]) +#define pgd_val(x) (x) +#define ctxd_val(x) (x) +#define pgprot_val(x) (x) +#define iopgprot_val(x) (x) + +#define __pte(x) (x) +#define __iopte(x) (x) +/* #define __pmd(x) (x) */ /* XXX later */ +#define __pgd(x) (x) +#define __ctxd(x) (x) +#define __pgprot(x) (x) +#define __iopgprot(x) (x) + +#endif + +extern unsigned long sparc_unmapped_base; + +BTFIXUPDEF_SETHI(sparc_unmapped_base) + +#define TASK_UNMAPPED_BASE BTFIXUP_SETHI(sparc_unmapped_base) + +/* Pure 2^n version of get_order */ +extern __inline__ int get_order(unsigned long size) +{ + int order; + + size = (size-1) >> (PAGE_SHIFT-1); + order = -1; + do { + size >>= 1; + order++; + } while (size); + return order; +} + +#else /* !(__ASSEMBLY__) */ + +#define __pgprot(x) (x) + +#endif /* !(__ASSEMBLY__) */ + +/* to align the pointer to the (next) page boundary */ +#define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) + +#define PAGE_OFFSET 0xf0000000 +#ifndef __ASSEMBLY__ +extern unsigned long phys_base; +extern unsigned long pfn_base; +#endif +#define __pa(x) ((unsigned long)(x) - PAGE_OFFSET + phys_base) +#define __va(x) ((void *)((unsigned long) (x) - phys_base + PAGE_OFFSET)) + +#define virt_to_phys __pa +#define phys_to_virt __va + +#define pfn_to_page(pfn) (mem_map + ((pfn)-(pfn_base))) +#define page_to_pfn(page) ((unsigned long)(((page) - mem_map) + pfn_base)) +#define virt_to_page(kaddr) (mem_map + ((((unsigned long)(kaddr)-PAGE_OFFSET)>>PAGE_SHIFT))) + +#define pfn_valid(pfn) (((pfn) >= (pfn_base)) && (((pfn)-(pfn_base)) < max_mapnr)) +#define virt_addr_valid(kaddr) ((((unsigned long)(kaddr)-PAGE_OFFSET)>>PAGE_SHIFT) < max_mapnr) + +#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \ + VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) + +#endif /* __KERNEL__ */ + +#endif /* _SPARC_PAGE_H */ diff --git a/include/asm-sparc/param.h b/include/asm-sparc/param.h new file mode 100644 index 00000000000..beaf02d364f --- /dev/null +++ b/include/asm-sparc/param.h @@ -0,0 +1,23 @@ +/* $Id: param.h,v 1.4 2000/10/30 21:01:41 davem Exp $ */ +#ifndef _ASMSPARC_PARAM_H +#define _ASMSPARC_PARAM_H + +#ifdef __KERNEL__ +# define HZ 100 /* Internal kernel timer frequency */ +# define USER_HZ 100 /* .. some user interfaces are in "ticks" */ +# define CLOCKS_PER_SEC (USER_HZ) +#endif + +#ifndef HZ +#define HZ 100 +#endif + +#define EXEC_PAGESIZE 8192 /* Thanks for sun4's we carry baggage... */ + +#ifndef NOGROUP +#define NOGROUP (-1) +#endif + +#define MAXHOSTNAMELEN 64 /* max length of hostname */ + +#endif diff --git a/include/asm-sparc/pbm.h b/include/asm-sparc/pbm.h new file mode 100644 index 00000000000..0aba3a82c2e --- /dev/null +++ b/include/asm-sparc/pbm.h @@ -0,0 +1,46 @@ +/* $Id: pbm.h,v 1.3 1999/12/20 17:06:35 zaitcev Exp $ + * + * pbm.h: PCI bus module pseudo driver software state + * Adopted from sparc64 by V. Roganov and G. Raiko + * + * Original header: + * pbm.h: U2P PCI bus module pseudo driver software state. + * + * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu) + * + * To put things into perspective, consider sparc64 with a few PCI controllers. + * Each type would have an own structure, with instances related one to one. + * We have only pcic on sparc, but we want to be compatible with sparc64 pbm.h. + * All three represent different abstractions. + * pci_bus - Linux PCI subsystem view of a PCI bus (including bridged buses) + * pbm - Arch-specific view of a PCI bus (sparc or sparc64) + * pcic - Chip-specific information for PCIC. + */ + +#ifndef __SPARC_PBM_H +#define __SPARC_PBM_H + +#include <linux/pci.h> +#include <asm/oplib.h> + +struct linux_pbm_info { + int prom_node; + char prom_name[64]; + /* struct linux_prom_pci_ranges pbm_ranges[PROMREG_MAX]; */ + /* int num_pbm_ranges; */ + + /* Now things for the actual PCI bus probes. */ + unsigned int pci_first_busno; /* Can it be nonzero? */ + struct pci_bus *pci_bus; /* Was inline, MJ allocs now */ +}; + +/* PCI devices which are not bridges have this placed in their pci_dev + * sysdata member. This makes OBP aware PCI device drivers easier to + * code. + */ +struct pcidev_cookie { + struct linux_pbm_info *pbm; + int prom_node; +}; + +#endif /* !(__SPARC_PBM_H) */ diff --git a/include/asm-sparc/pci.h b/include/asm-sparc/pci.h new file mode 100644 index 00000000000..d200a25a737 --- /dev/null +++ b/include/asm-sparc/pci.h @@ -0,0 +1,163 @@ +#ifndef __SPARC_PCI_H +#define __SPARC_PCI_H + +#ifdef __KERNEL__ + +/* Can be used to override the logic in pci_scan_bus for skipping + * already-configured bus numbers - to be used for buggy BIOSes + * or architectures with incomplete PCI setup by the loader. + */ +#define pcibios_assign_all_busses() 0 +#define pcibios_scan_all_fns(a, b) 0 + +#define PCIBIOS_MIN_IO 0UL +#define PCIBIOS_MIN_MEM 0UL + +#define PCI_IRQ_NONE 0xffffffff + +extern inline void pcibios_set_master(struct pci_dev *dev) +{ + /* No special bus mastering setup handling */ +} + +extern inline void pcibios_penalize_isa_irq(int irq) +{ + /* We don't do dynamic PCI IRQ allocation */ +} + +/* Dynamic DMA mapping stuff. + */ +#define PCI_DMA_BUS_IS_PHYS (0) + +#include <asm/scatterlist.h> + +struct pci_dev; + +/* Allocate and map kernel buffer using consistent mode DMA for a device. + * hwdev should be valid struct pci_dev pointer for PCI devices. + */ +extern void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size, dma_addr_t *dma_handle); + +/* Free and unmap a consistent DMA buffer. + * cpu_addr is what was returned from pci_alloc_consistent, + * size must be the same as what as passed into pci_alloc_consistent, + * and likewise dma_addr must be the same as what *dma_addrp was set to. + * + * References to the memory and mappings assosciated with cpu_addr/dma_addr + * past this call are illegal. + */ +extern void pci_free_consistent(struct pci_dev *hwdev, size_t size, void *vaddr, dma_addr_t dma_handle); + +/* Map a single buffer of the indicated size for DMA in streaming mode. + * The 32-bit bus address to use is returned. + * + * Once the device is given the dma address, the device owns this memory + * until either pci_unmap_single or pci_dma_sync_single_for_cpu is performed. + */ +extern dma_addr_t pci_map_single(struct pci_dev *hwdev, void *ptr, size_t size, int direction); + +/* Unmap a single streaming mode DMA translation. The dma_addr and size + * must match what was provided for in a previous pci_map_single call. All + * other usages are undefined. + * + * After this call, reads by the cpu to the buffer are guaranteed to see + * whatever the device wrote there. + */ +extern void pci_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr, size_t size, int direction); + +/* pci_unmap_{single,page} is not a nop, thus... */ +#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \ + dma_addr_t ADDR_NAME; +#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \ + __u32 LEN_NAME; +#define pci_unmap_addr(PTR, ADDR_NAME) \ + ((PTR)->ADDR_NAME) +#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \ + (((PTR)->ADDR_NAME) = (VAL)) +#define pci_unmap_len(PTR, LEN_NAME) \ + ((PTR)->LEN_NAME) +#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \ + (((PTR)->LEN_NAME) = (VAL)) + +/* + * Same as above, only with pages instead of mapped addresses. + */ +extern dma_addr_t pci_map_page(struct pci_dev *hwdev, struct page *page, + unsigned long offset, size_t size, int direction); +extern void pci_unmap_page(struct pci_dev *hwdev, + dma_addr_t dma_address, size_t size, int direction); + +/* Map a set of buffers described by scatterlist in streaming + * mode for DMA. This is the scather-gather version of the + * above pci_map_single interface. Here the scatter gather list + * elements are each tagged with the appropriate dma address + * and length. They are obtained via sg_dma_{address,length}(SG). + * + * NOTE: An implementation may be able to use a smaller number of + * DMA address/length pairs than there are SG table elements. + * (for example via virtual mapping capabilities) + * The routine returns the number of addr/length pairs actually + * used, at most nents. + * + * Device ownership issues as mentioned above for pci_map_single are + * the same here. + */ +extern int pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg, int nents, int direction); + +/* Unmap a set of streaming mode DMA translations. + * Again, cpu read rules concerning calls here are the same as for + * pci_unmap_single() above. + */ +extern void pci_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sg, int nhwents, int direction); + +/* Make physical memory consistent for a single + * streaming mode DMA translation after a transfer. + * + * If you perform a pci_map_single() but wish to interrogate the + * buffer using the cpu, yet do not wish to teardown the PCI dma + * mapping, you must call this function before doing so. At the + * next point you give the PCI dma address back to the card, you + * must first perform a pci_dma_sync_for_device, and then the device + * again owns the buffer. + */ +extern void pci_dma_sync_single_for_cpu(struct pci_dev *hwdev, dma_addr_t dma_handle, size_t size, int direction); +extern void pci_dma_sync_single_for_device(struct pci_dev *hwdev, dma_addr_t dma_handle, size_t size, int direction); + +/* Make physical memory consistent for a set of streaming + * mode DMA translations after a transfer. + * + * The same as pci_dma_sync_single_* but for a scatter-gather list, + * same rules and usage. + */ +extern void pci_dma_sync_sg_for_cpu(struct pci_dev *hwdev, struct scatterlist *sg, int nelems, int direction); +extern void pci_dma_sync_sg_for_device(struct pci_dev *hwdev, struct scatterlist *sg, int nelems, int direction); + +/* Return whether the given PCI device DMA address mask can + * be supported properly. For example, if your device can + * only drive the low 24-bits during PCI bus mastering, then + * you would pass 0x00ffffff as the mask to this function. + */ +extern inline int pci_dma_supported(struct pci_dev *hwdev, u64 mask) +{ + return 1; +} + +#define pci_dac_dma_supported(dev, mask) (0) + +static inline void pcibios_add_platform_entries(struct pci_dev *dev) +{ +} + +#define PCI_DMA_ERROR_CODE (~(dma_addr_t)0x0) + +static inline int pci_dma_mapping_error(dma_addr_t dma_addr) +{ + return (dma_addr == PCI_DMA_ERROR_CODE); +} + +#endif /* __KERNEL__ */ + +/* generic pci stuff */ +#include <asm-generic/pci.h> + +#endif /* __SPARC_PCI_H */ diff --git a/include/asm-sparc/pcic.h b/include/asm-sparc/pcic.h new file mode 100644 index 00000000000..301ae8022dd --- /dev/null +++ b/include/asm-sparc/pcic.h @@ -0,0 +1,123 @@ +/* $Id: pcic.h,v 1.4 1999/11/17 07:34:20 zaitcev Exp $ + * pcic.h: JavaEngine 1 specific PCI definitions. + * + * Copyright (C) 1998 V. Roganov and G. Raiko + */ + +#ifndef __SPARC_PCIC_H +#define __SPARC_PCIC_H + +#ifndef __ASSEMBLY__ + +#include <linux/types.h> +#include <linux/smp.h> +#include <linux/pci.h> +#include <linux/ioport.h> +#include <asm/pbm.h> + +struct linux_pcic { + void * __iomem pcic_regs; + unsigned long pcic_io; + void * __iomem pcic_config_space_addr; + void * __iomem pcic_config_space_data; + struct resource pcic_res_regs; + struct resource pcic_res_io; + struct resource pcic_res_cfg_addr; + struct resource pcic_res_cfg_data; + struct linux_pbm_info pbm; + struct pcic_ca2irq *pcic_imap; + int pcic_imdim; +}; + +extern int pcic_probe(void); +/* Erm... MJ redefined pcibios_present() so that it does not work early. */ +extern int pcic_present(void); +extern void sun4m_pci_init_IRQ(void); + +#endif + +/* Size of PCI I/O space which we relocate. */ +#define PCI_SPACE_SIZE 0x1000000 /* 16 MB */ + +/* PCIC Register Set. */ +#define PCI_DIAGNOSTIC_0 0x40 /* 32 bits */ +#define PCI_SIZE_0 0x44 /* 32 bits */ +#define PCI_SIZE_1 0x48 /* 32 bits */ +#define PCI_SIZE_2 0x4c /* 32 bits */ +#define PCI_SIZE_3 0x50 /* 32 bits */ +#define PCI_SIZE_4 0x54 /* 32 bits */ +#define PCI_SIZE_5 0x58 /* 32 bits */ +#define PCI_PIO_CONTROL 0x60 /* 8 bits */ +#define PCI_DVMA_CONTROL 0x62 /* 8 bits */ +#define PCI_DVMA_CONTROL_INACTIVITY_REQ (1<<0) +#define PCI_DVMA_CONTROL_IOTLB_ENABLE (1<<0) +#define PCI_DVMA_CONTROL_IOTLB_DISABLE 0 +#define PCI_DVMA_CONTROL_INACTIVITY_ACK (1<<4) +#define PCI_INTERRUPT_CONTROL 0x63 /* 8 bits */ +#define PCI_CPU_INTERRUPT_PENDING 0x64 /* 32 bits */ +#define PCI_DIAGNOSTIC_1 0x68 /* 16 bits */ +#define PCI_SOFTWARE_INT_CLEAR 0x6a /* 16 bits */ +#define PCI_SOFTWARE_INT_SET 0x6e /* 16 bits */ +#define PCI_SYS_INT_PENDING 0x70 /* 32 bits */ +#define PCI_SYS_INT_PENDING_PIO 0x40000000 +#define PCI_SYS_INT_PENDING_DMA 0x20000000 +#define PCI_SYS_INT_PENDING_PCI 0x10000000 +#define PCI_SYS_INT_PENDING_APSR 0x08000000 +#define PCI_SYS_INT_TARGET_MASK 0x74 /* 32 bits */ +#define PCI_SYS_INT_TARGET_MASK_CLEAR 0x78 /* 32 bits */ +#define PCI_SYS_INT_TARGET_MASK_SET 0x7c /* 32 bits */ +#define PCI_SYS_INT_PENDING_CLEAR 0x83 /* 8 bits */ +#define PCI_SYS_INT_PENDING_CLEAR_ALL 0x80 +#define PCI_SYS_INT_PENDING_CLEAR_PIO 0x40 +#define PCI_SYS_INT_PENDING_CLEAR_DMA 0x20 +#define PCI_SYS_INT_PENDING_CLEAR_PCI 0x10 +#define PCI_IOTLB_CONTROL 0x84 /* 8 bits */ +#define PCI_INT_SELECT_LO 0x88 /* 16 bits */ +#define PCI_ARBITRATION_SELECT 0x8a /* 16 bits */ +#define PCI_INT_SELECT_HI 0x8c /* 16 bits */ +#define PCI_HW_INT_OUTPUT 0x8e /* 16 bits */ +#define PCI_IOTLB_RAM_INPUT 0x90 /* 32 bits */ +#define PCI_IOTLB_CAM_INPUT 0x94 /* 32 bits */ +#define PCI_IOTLB_RAM_OUTPUT 0x98 /* 32 bits */ +#define PCI_IOTLB_CAM_OUTPUT 0x9c /* 32 bits */ +#define PCI_SMBAR0 0xa0 /* 8 bits */ +#define PCI_MSIZE0 0xa1 /* 8 bits */ +#define PCI_PMBAR0 0xa2 /* 8 bits */ +#define PCI_SMBAR1 0xa4 /* 8 bits */ +#define PCI_MSIZE1 0xa5 /* 8 bits */ +#define PCI_PMBAR1 0xa6 /* 8 bits */ +#define PCI_SIBAR 0xa8 /* 8 bits */ +#define PCI_SIBAR_ADDRESS_MASK 0xf +#define PCI_ISIZE 0xa9 /* 8 bits */ +#define PCI_ISIZE_16M 0xf +#define PCI_ISIZE_32M 0xe +#define PCI_ISIZE_64M 0xc +#define PCI_ISIZE_128M 0x8 +#define PCI_ISIZE_256M 0x0 +#define PCI_PIBAR 0xaa /* 8 bits */ +#define PCI_CPU_COUNTER_LIMIT_HI 0xac /* 32 bits */ +#define PCI_CPU_COUNTER_LIMIT_LO 0xb0 /* 32 bits */ +#define PCI_CPU_COUNTER_LIMIT 0xb4 /* 32 bits */ +#define PCI_SYS_LIMIT 0xb8 /* 32 bits */ +#define PCI_SYS_COUNTER 0xbc /* 32 bits */ +#define PCI_SYS_COUNTER_OVERFLOW (1<<31) /* Limit reached */ +#define PCI_SYS_LIMIT_PSEUDO 0xc0 /* 32 bits */ +#define PCI_USER_TIMER_CONTROL 0xc4 /* 8 bits */ +#define PCI_USER_TIMER_CONFIG 0xc5 /* 8 bits */ +#define PCI_COUNTER_IRQ 0xc6 /* 8 bits */ +#define PCI_COUNTER_IRQ_SET(sys_irq, cpu_irq) ((((sys_irq) & 0xf) << 4) | \ + ((cpu_irq) & 0xf)) +#define PCI_COUNTER_IRQ_SYS(v) (((v) >> 4) & 0xf) +#define PCI_COUNTER_IRQ_CPU(v) ((v) & 0xf) +#define PCI_PIO_ERROR_COMMAND 0xc7 /* 8 bits */ +#define PCI_PIO_ERROR_ADDRESS 0xc8 /* 32 bits */ +#define PCI_IOTLB_ERROR_ADDRESS 0xcc /* 32 bits */ +#define PCI_SYS_STATUS 0xd0 /* 8 bits */ +#define PCI_SYS_STATUS_RESET_ENABLE (1<<0) +#define PCI_SYS_STATUS_RESET (1<<1) +#define PCI_SYS_STATUS_WATCHDOG_RESET (1<<4) +#define PCI_SYS_STATUS_PCI_RESET (1<<5) +#define PCI_SYS_STATUS_PCI_RESET_ENABLE (1<<6) +#define PCI_SYS_STATUS_PCI_SATTELITE_MODE (1<<7) + +#endif /* !(__SPARC_PCIC_H) */ diff --git a/include/asm-sparc/pconf.h b/include/asm-sparc/pconf.h new file mode 100644 index 00000000000..d73c1f1c49d --- /dev/null +++ b/include/asm-sparc/pconf.h @@ -0,0 +1,25 @@ +/* $Id: pconf.h,v 1.3 1996/04/25 06:13:25 davem Exp $ + * pconf.h: pathconf() and fpathconf() defines for SunOS + * system call compatibility. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef _SPARC_PCONF_H +#define _SPARC_PCONF_H + +#include <linux/fs.h> +#include <linux/limits.h> + +#define _PCONF_LINK 1 /* Max number of links to an object */ +#define _PCONF_CANON 2 /* TTY input buffer line size */ +#define _PCONF_INPUT 3 /* Biggest packet a tty can imbibe at once */ +#define _PCONF_NAME 4 /* Filename length max */ +#define _PCONF_PATH 5 /* Max size of a pathname */ +#define _PCONF_PIPE 6 /* Buffer size for a pipe */ +#define _PCONF_CHRESTRICT 7 /* Can only root chown files? */ +#define _PCONF_NOTRUNC 8 /* Are pathnames truncated if too big? */ +#define _PCONF_VDISABLE 9 /* Magic char to disable special tty chars */ +#define _PCONF_MAXPCONF 9 + +#endif /* !(_SPARC_PCONF_H) */ diff --git a/include/asm-sparc/percpu.h b/include/asm-sparc/percpu.h new file mode 100644 index 00000000000..06066a7aaec --- /dev/null +++ b/include/asm-sparc/percpu.h @@ -0,0 +1,6 @@ +#ifndef __ARCH_SPARC_PERCPU__ +#define __ARCH_SPARC_PERCPU__ + +#include <asm-generic/percpu.h> + +#endif /* __ARCH_SPARC_PERCPU__ */ diff --git a/include/asm-sparc/perfctr.h b/include/asm-sparc/perfctr.h new file mode 100644 index 00000000000..836873002b7 --- /dev/null +++ b/include/asm-sparc/perfctr.h @@ -0,0 +1,173 @@ +/*---------------------------------------- + PERFORMANCE INSTRUMENTATION + Guillaume Thouvenin 08/10/98 + David S. Miller 10/06/98 + ---------------------------------------*/ +#ifndef PERF_COUNTER_API +#define PERF_COUNTER_API + +/* sys_perfctr() interface. First arg is operation code + * from enumeration below. The meaning of further arguments + * are determined by the operation code. + * + * int sys_perfctr(int opcode, unsigned long arg0, + * unsigned long arg1, unsigned long arg2) + * + * Pointers which are passed by the user are pointers to 64-bit + * integers. + * + * Once enabled, performance counter state is retained until the + * process either exits or performs an exec. That is, performance + * counters remain enabled for fork/clone children. + */ +enum perfctr_opcode { + /* Enable UltraSparc performance counters, ARG0 is pointer + * to 64-bit accumulator for D0 counter in PIC, ARG1 is pointer + * to 64-bit accumulator for D1 counter. ARG2 is a pointer to + * the initial PCR register value to use. + */ + PERFCTR_ON, + + /* Disable UltraSparc performance counters. The PCR is written + * with zero and the user counter accumulator pointers and + * working PCR register value are forgotten. + */ + PERFCTR_OFF, + + /* Add current D0 and D1 PIC values into user pointers given + * in PERFCTR_ON operation. The PIC is cleared before returning. + */ + PERFCTR_READ, + + /* Clear the PIC register. */ + PERFCTR_CLRPIC, + + /* Begin using a new PCR value, the pointer to which is passed + * in ARG0. The PIC is also cleared after the new PCR value is + * written. + */ + PERFCTR_SETPCR, + + /* Store in pointer given in ARG0 the current PCR register value + * being used. + */ + PERFCTR_GETPCR +}; + +/* I don't want the kernel's namespace to be polluted with this + * stuff when this file is included. --DaveM + */ +#ifndef __KERNEL__ + +#define PRIV 0x00000001 +#define SYS 0x00000002 +#define USR 0x00000004 + +/* Pic.S0 Selection Bit Field Encoding, Ultra-I/II */ +#define CYCLE_CNT 0x00000000 +#define INSTR_CNT 0x00000010 +#define DISPATCH0_IC_MISS 0x00000020 +#define DISPATCH0_STOREBUF 0x00000030 +#define IC_REF 0x00000080 +#define DC_RD 0x00000090 +#define DC_WR 0x000000A0 +#define LOAD_USE 0x000000B0 +#define EC_REF 0x000000C0 +#define EC_WRITE_HIT_RDO 0x000000D0 +#define EC_SNOOP_INV 0x000000E0 +#define EC_RD_HIT 0x000000F0 + +/* Pic.S0 Selection Bit Field Encoding, Ultra-III */ +#define US3_CYCLE_CNT 0x00000000 +#define US3_INSTR_CNT 0x00000010 +#define US3_DISPATCH0_IC_MISS 0x00000020 +#define US3_DISPATCH0_BR_TGT 0x00000030 +#define US3_DISPATCH0_2ND_BR 0x00000040 +#define US3_RSTALL_STOREQ 0x00000050 +#define US3_RSTALL_IU_USE 0x00000060 +#define US3_IC_REF 0x00000080 +#define US3_DC_RD 0x00000090 +#define US3_DC_WR 0x000000a0 +#define US3_EC_REF 0x000000c0 +#define US3_EC_WR_HIT_RTO 0x000000d0 +#define US3_EC_SNOOP_INV 0x000000e0 +#define US3_EC_RD_MISS 0x000000f0 +#define US3_PC_PORT0_RD 0x00000100 +#define US3_SI_SNOOP 0x00000110 +#define US3_SI_CIQ_FLOW 0x00000120 +#define US3_SI_OWNED 0x00000130 +#define US3_SW_COUNT_0 0x00000140 +#define US3_IU_BR_MISS_TAKEN 0x00000150 +#define US3_IU_BR_COUNT_TAKEN 0x00000160 +#define US3_DISP_RS_MISPRED 0x00000170 +#define US3_FA_PIPE_COMPL 0x00000180 +#define US3_MC_READS_0 0x00000200 +#define US3_MC_READS_1 0x00000210 +#define US3_MC_READS_2 0x00000220 +#define US3_MC_READS_3 0x00000230 +#define US3_MC_STALLS_0 0x00000240 +#define US3_MC_STALLS_2 0x00000250 + +/* Pic.S1 Selection Bit Field Encoding, Ultra-I/II */ +#define CYCLE_CNT_D1 0x00000000 +#define INSTR_CNT_D1 0x00000800 +#define DISPATCH0_IC_MISPRED 0x00001000 +#define DISPATCH0_FP_USE 0x00001800 +#define IC_HIT 0x00004000 +#define DC_RD_HIT 0x00004800 +#define DC_WR_HIT 0x00005000 +#define LOAD_USE_RAW 0x00005800 +#define EC_HIT 0x00006000 +#define EC_WB 0x00006800 +#define EC_SNOOP_CB 0x00007000 +#define EC_IT_HIT 0x00007800 + +/* Pic.S1 Selection Bit Field Encoding, Ultra-III */ +#define US3_CYCLE_CNT_D1 0x00000000 +#define US3_INSTR_CNT_D1 0x00000800 +#define US3_DISPATCH0_MISPRED 0x00001000 +#define US3_IC_MISS_CANCELLED 0x00001800 +#define US3_RE_ENDIAN_MISS 0x00002000 +#define US3_RE_FPU_BYPASS 0x00002800 +#define US3_RE_DC_MISS 0x00003000 +#define US3_RE_EC_MISS 0x00003800 +#define US3_IC_MISS 0x00004000 +#define US3_DC_RD_MISS 0x00004800 +#define US3_DC_WR_MISS 0x00005000 +#define US3_RSTALL_FP_USE 0x00005800 +#define US3_EC_MISSES 0x00006000 +#define US3_EC_WB 0x00006800 +#define US3_EC_SNOOP_CB 0x00007000 +#define US3_EC_IC_MISS 0x00007800 +#define US3_RE_PC_MISS 0x00008000 +#define US3_ITLB_MISS 0x00008800 +#define US3_DTLB_MISS 0x00009000 +#define US3_WC_MISS 0x00009800 +#define US3_WC_SNOOP_CB 0x0000a000 +#define US3_WC_SCRUBBED 0x0000a800 +#define US3_WC_WB_WO_READ 0x0000b000 +#define US3_PC_SOFT_HIT 0x0000c000 +#define US3_PC_SNOOP_INV 0x0000c800 +#define US3_PC_HARD_HIT 0x0000d000 +#define US3_PC_PORT1_RD 0x0000d800 +#define US3_SW_COUNT_1 0x0000e000 +#define US3_IU_STAT_BR_MIS_UNTAKEN 0x0000e800 +#define US3_IU_STAT_BR_COUNT_UNTAKEN 0x0000f000 +#define US3_PC_MS_MISSES 0x0000f800 +#define US3_MC_WRITES_0 0x00010800 +#define US3_MC_WRITES_1 0x00011000 +#define US3_MC_WRITES_2 0x00011800 +#define US3_MC_WRITES_3 0x00012000 +#define US3_MC_STALLS_1 0x00012800 +#define US3_MC_STALLS_3 0x00013000 +#define US3_RE_RAW_MISS 0x00013800 +#define US3_FM_PIPE_COMPLETION 0x00014000 + +struct vcounter_struct { + unsigned long long vcnt0; + unsigned long long vcnt1; +}; + +#endif /* !(__KERNEL__) */ + +#endif /* !(PERF_COUNTER_API) */ diff --git a/include/asm-sparc/pgalloc.h b/include/asm-sparc/pgalloc.h new file mode 100644 index 00000000000..126800acd10 --- /dev/null +++ b/include/asm-sparc/pgalloc.h @@ -0,0 +1,69 @@ +/* $Id: pgalloc.h,v 1.16 2001/12/21 04:56:17 davem Exp $ */ +#ifndef _SPARC_PGALLOC_H +#define _SPARC_PGALLOC_H + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/sched.h> + +#include <asm/page.h> +#include <asm/btfixup.h> + +struct page; + +extern struct pgtable_cache_struct { + unsigned long *pgd_cache; + unsigned long *pte_cache; + unsigned long pgtable_cache_sz; + unsigned long pgd_cache_sz; +} pgt_quicklists; +#define pgd_quicklist (pgt_quicklists.pgd_cache) +#define pmd_quicklist ((unsigned long *)0) +#define pte_quicklist (pgt_quicklists.pte_cache) +#define pgtable_cache_size (pgt_quicklists.pgtable_cache_sz) +#define pgd_cache_size (pgt_quicklists.pgd_cache_sz) + +extern void check_pgt_cache(void); +BTFIXUPDEF_CALL(void, do_check_pgt_cache, int, int) +#define do_check_pgt_cache(low,high) BTFIXUP_CALL(do_check_pgt_cache)(low,high) + +BTFIXUPDEF_CALL(pgd_t *, get_pgd_fast, void) +#define get_pgd_fast() BTFIXUP_CALL(get_pgd_fast)() + +BTFIXUPDEF_CALL(void, free_pgd_fast, pgd_t *) +#define free_pgd_fast(pgd) BTFIXUP_CALL(free_pgd_fast)(pgd) + +#define pgd_free(pgd) free_pgd_fast(pgd) +#define pgd_alloc(mm) get_pgd_fast() + +BTFIXUPDEF_CALL(void, pgd_set, pgd_t *, pmd_t *) +#define pgd_set(pgdp,pmdp) BTFIXUP_CALL(pgd_set)(pgdp,pmdp) +#define pgd_populate(MM, PGD, PMD) pgd_set(PGD, PMD) + +BTFIXUPDEF_CALL(pmd_t *, pmd_alloc_one, struct mm_struct *, unsigned long) +#define pmd_alloc_one(mm, address) BTFIXUP_CALL(pmd_alloc_one)(mm, address) + +BTFIXUPDEF_CALL(void, free_pmd_fast, pmd_t *) +#define free_pmd_fast(pmd) BTFIXUP_CALL(free_pmd_fast)(pmd) + +#define pmd_free(pmd) free_pmd_fast(pmd) +#define __pmd_free_tlb(tlb, pmd) pmd_free(pmd) + +BTFIXUPDEF_CALL(void, pmd_populate, pmd_t *, struct page *) +#define pmd_populate(MM, PMD, PTE) BTFIXUP_CALL(pmd_populate)(PMD, PTE) +BTFIXUPDEF_CALL(void, pmd_set, pmd_t *, pte_t *) +#define pmd_populate_kernel(MM, PMD, PTE) BTFIXUP_CALL(pmd_set)(PMD, PTE) + +BTFIXUPDEF_CALL(struct page *, pte_alloc_one, struct mm_struct *, unsigned long) +#define pte_alloc_one(mm, address) BTFIXUP_CALL(pte_alloc_one)(mm, address) +BTFIXUPDEF_CALL(pte_t *, pte_alloc_one_kernel, struct mm_struct *, unsigned long) +#define pte_alloc_one_kernel(mm, addr) BTFIXUP_CALL(pte_alloc_one_kernel)(mm, addr) + +BTFIXUPDEF_CALL(void, free_pte_fast, pte_t *) +#define pte_free_kernel(pte) BTFIXUP_CALL(free_pte_fast)(pte) + +BTFIXUPDEF_CALL(void, pte_free, struct page *) +#define pte_free(pte) BTFIXUP_CALL(pte_free)(pte) +#define __pte_free_tlb(tlb, pte) pte_free(pte) + +#endif /* _SPARC_PGALLOC_H */ diff --git a/include/asm-sparc/pgtable.h b/include/asm-sparc/pgtable.h new file mode 100644 index 00000000000..373a6c32759 --- /dev/null +++ b/include/asm-sparc/pgtable.h @@ -0,0 +1,465 @@ +/* $Id: pgtable.h,v 1.110 2001/12/21 04:56:17 davem Exp $ */ +#ifndef _SPARC_PGTABLE_H +#define _SPARC_PGTABLE_H + +/* asm-sparc/pgtable.h: Defines and functions used to work + * with Sparc page tables. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + * Copyright (C) 1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz) + */ + +#include <asm-generic/4level-fixup.h> + +#include <linux/config.h> +#include <linux/spinlock.h> +#include <linux/swap.h> +#include <asm/types.h> +#ifdef CONFIG_SUN4 +#include <asm/pgtsun4.h> +#else +#include <asm/pgtsun4c.h> +#endif +#include <asm/pgtsrmmu.h> +#include <asm/vac-ops.h> +#include <asm/oplib.h> +#include <asm/btfixup.h> +#include <asm/system.h> + +#ifndef __ASSEMBLY__ + +struct vm_area_struct; +struct page; + +extern void load_mmu(void); +extern unsigned long calc_highpages(void); + +BTFIXUPDEF_SIMM13(pgdir_shift) +BTFIXUPDEF_SETHI(pgdir_size) +BTFIXUPDEF_SETHI(pgdir_mask) + +BTFIXUPDEF_SIMM13(ptrs_per_pmd) +BTFIXUPDEF_SIMM13(ptrs_per_pgd) +BTFIXUPDEF_SIMM13(user_ptrs_per_pgd) + +#define pte_ERROR(e) __builtin_trap() +#define pmd_ERROR(e) __builtin_trap() +#define pgd_ERROR(e) __builtin_trap() + +BTFIXUPDEF_INT(page_none) +BTFIXUPDEF_INT(page_shared) +BTFIXUPDEF_INT(page_copy) +BTFIXUPDEF_INT(page_readonly) +BTFIXUPDEF_INT(page_kernel) + +#define PMD_SHIFT SUN4C_PMD_SHIFT +#define PMD_SIZE (1UL << PMD_SHIFT) +#define PMD_MASK (~(PMD_SIZE-1)) +#define PMD_ALIGN(__addr) (((__addr) + ~PMD_MASK) & PMD_MASK) +#define PGDIR_SHIFT BTFIXUP_SIMM13(pgdir_shift) +#define PGDIR_SIZE BTFIXUP_SETHI(pgdir_size) +#define PGDIR_MASK BTFIXUP_SETHI(pgdir_mask) +#define PTRS_PER_PTE 1024 +#define PTRS_PER_PMD BTFIXUP_SIMM13(ptrs_per_pmd) +#define PTRS_PER_PGD BTFIXUP_SIMM13(ptrs_per_pgd) +#define USER_PTRS_PER_PGD BTFIXUP_SIMM13(user_ptrs_per_pgd) +#define FIRST_USER_PGD_NR 0 +#define PTE_SIZE (PTRS_PER_PTE*4) + +#define PAGE_NONE __pgprot(BTFIXUP_INT(page_none)) +#define PAGE_SHARED __pgprot(BTFIXUP_INT(page_shared)) +#define PAGE_COPY __pgprot(BTFIXUP_INT(page_copy)) +#define PAGE_READONLY __pgprot(BTFIXUP_INT(page_readonly)) + +extern unsigned long page_kernel; + +#ifdef MODULE +#define PAGE_KERNEL page_kernel +#else +#define PAGE_KERNEL __pgprot(BTFIXUP_INT(page_kernel)) +#endif + +/* Top-level page directory */ +extern pgd_t swapper_pg_dir[1024]; + +/* Page table for 0-4MB for everybody, on the Sparc this + * holds the same as on the i386. + */ +extern pte_t pg0[1024]; +extern pte_t pg1[1024]; +extern pte_t pg2[1024]; +extern pte_t pg3[1024]; + +extern unsigned long ptr_in_current_pgd; + +/* Here is a trick, since mmap.c need the initializer elements for + * protection_map[] to be constant at compile time, I set the following + * to all zeros. I set it to the real values after I link in the + * appropriate MMU page table routines at boot time. + */ +#define __P000 __pgprot(0) +#define __P001 __pgprot(0) +#define __P010 __pgprot(0) +#define __P011 __pgprot(0) +#define __P100 __pgprot(0) +#define __P101 __pgprot(0) +#define __P110 __pgprot(0) +#define __P111 __pgprot(0) + +#define __S000 __pgprot(0) +#define __S001 __pgprot(0) +#define __S010 __pgprot(0) +#define __S011 __pgprot(0) +#define __S100 __pgprot(0) +#define __S101 __pgprot(0) +#define __S110 __pgprot(0) +#define __S111 __pgprot(0) + +extern int num_contexts; + +/* First physical page can be anywhere, the following is needed so that + * va-->pa and vice versa conversions work properly without performance + * hit for all __pa()/__va() operations. + */ +extern unsigned long phys_base; +extern unsigned long pfn_base; + +/* + * BAD_PAGETABLE is used when we need a bogus page-table, while + * BAD_PAGE is used for a bogus page. + * + * ZERO_PAGE is a global shared page that is always zero: used + * for zero-mapped memory areas etc.. + */ +extern pte_t * __bad_pagetable(void); +extern pte_t __bad_page(void); +extern unsigned long empty_zero_page; + +#define BAD_PAGETABLE __bad_pagetable() +#define BAD_PAGE __bad_page() +#define ZERO_PAGE(vaddr) (virt_to_page(&empty_zero_page)) + +/* + */ +BTFIXUPDEF_CALL_CONST(struct page *, pmd_page, pmd_t) +BTFIXUPDEF_CALL_CONST(unsigned long, pgd_page, pgd_t) + +#define pmd_page(pmd) BTFIXUP_CALL(pmd_page)(pmd) +#define pgd_page(pgd) BTFIXUP_CALL(pgd_page)(pgd) + +BTFIXUPDEF_SETHI(none_mask) +BTFIXUPDEF_CALL_CONST(int, pte_present, pte_t) +BTFIXUPDEF_CALL(void, pte_clear, pte_t *) +BTFIXUPDEF_CALL(int, pte_read, pte_t) + +extern __inline__ int pte_none(pte_t pte) +{ + return !(pte_val(pte) & ~BTFIXUP_SETHI(none_mask)); +} + +#define pte_present(pte) BTFIXUP_CALL(pte_present)(pte) +#define pte_clear(mm,addr,pte) BTFIXUP_CALL(pte_clear)(pte) +#define pte_read(pte) BTFIXUP_CALL(pte_read)(pte) + +BTFIXUPDEF_CALL_CONST(int, pmd_bad, pmd_t) +BTFIXUPDEF_CALL_CONST(int, pmd_present, pmd_t) +BTFIXUPDEF_CALL(void, pmd_clear, pmd_t *) + +extern __inline__ int pmd_none(pmd_t pmd) +{ + return !(pmd_val(pmd) & ~BTFIXUP_SETHI(none_mask)); +} + +#define pmd_bad(pmd) BTFIXUP_CALL(pmd_bad)(pmd) +#define pmd_present(pmd) BTFIXUP_CALL(pmd_present)(pmd) +#define pmd_clear(pmd) BTFIXUP_CALL(pmd_clear)(pmd) + +BTFIXUPDEF_CALL_CONST(int, pgd_none, pgd_t) +BTFIXUPDEF_CALL_CONST(int, pgd_bad, pgd_t) +BTFIXUPDEF_CALL_CONST(int, pgd_present, pgd_t) +BTFIXUPDEF_CALL(void, pgd_clear, pgd_t *) + +#define pgd_none(pgd) BTFIXUP_CALL(pgd_none)(pgd) +#define pgd_bad(pgd) BTFIXUP_CALL(pgd_bad)(pgd) +#define pgd_present(pgd) BTFIXUP_CALL(pgd_present)(pgd) +#define pgd_clear(pgd) BTFIXUP_CALL(pgd_clear)(pgd) + +/* + * The following only work if pte_present() is true. + * Undefined behaviour if not.. + */ +BTFIXUPDEF_HALF(pte_writei) +BTFIXUPDEF_HALF(pte_dirtyi) +BTFIXUPDEF_HALF(pte_youngi) + +extern int pte_write(pte_t pte) __attribute_const__; +extern __inline__ int pte_write(pte_t pte) +{ + return pte_val(pte) & BTFIXUP_HALF(pte_writei); +} + +extern int pte_dirty(pte_t pte) __attribute_const__; +extern __inline__ int pte_dirty(pte_t pte) +{ + return pte_val(pte) & BTFIXUP_HALF(pte_dirtyi); +} + +extern int pte_young(pte_t pte) __attribute_const__; +extern __inline__ int pte_young(pte_t pte) +{ + return pte_val(pte) & BTFIXUP_HALF(pte_youngi); +} + +/* + * The following only work if pte_present() is not true. + */ +BTFIXUPDEF_HALF(pte_filei) + +extern int pte_file(pte_t pte) __attribute_const__; +extern __inline__ int pte_file(pte_t pte) +{ + return pte_val(pte) & BTFIXUP_HALF(pte_filei); +} + +/* + */ +BTFIXUPDEF_HALF(pte_wrprotecti) +BTFIXUPDEF_HALF(pte_mkcleani) +BTFIXUPDEF_HALF(pte_mkoldi) + +extern pte_t pte_wrprotect(pte_t pte) __attribute_const__; +extern __inline__ pte_t pte_wrprotect(pte_t pte) +{ + return __pte(pte_val(pte) & ~BTFIXUP_HALF(pte_wrprotecti)); +} + +extern pte_t pte_mkclean(pte_t pte) __attribute_const__; +extern __inline__ pte_t pte_mkclean(pte_t pte) +{ + return __pte(pte_val(pte) & ~BTFIXUP_HALF(pte_mkcleani)); +} + +extern pte_t pte_mkold(pte_t pte) __attribute_const__; +extern __inline__ pte_t pte_mkold(pte_t pte) +{ + return __pte(pte_val(pte) & ~BTFIXUP_HALF(pte_mkoldi)); +} + +BTFIXUPDEF_CALL_CONST(pte_t, pte_mkwrite, pte_t) +BTFIXUPDEF_CALL_CONST(pte_t, pte_mkdirty, pte_t) +BTFIXUPDEF_CALL_CONST(pte_t, pte_mkyoung, pte_t) + +#define pte_mkwrite(pte) BTFIXUP_CALL(pte_mkwrite)(pte) +#define pte_mkdirty(pte) BTFIXUP_CALL(pte_mkdirty)(pte) +#define pte_mkyoung(pte) BTFIXUP_CALL(pte_mkyoung)(pte) + +#define page_pte_prot(page, prot) mk_pte(page, prot) +#define page_pte(page) mk_pte(page, __pgprot(0)) +#define pfn_pte(pfn, prot) mk_pte(pfn_to_page(pfn), prot) + +BTFIXUPDEF_CALL(unsigned long, pte_pfn, pte_t) +#define pte_pfn(pte) BTFIXUP_CALL(pte_pfn)(pte) +#define pte_page(pte) pfn_to_page(pte_pfn(pte)) + +/* + * Conversion functions: convert a page and protection to a page entry, + * and a page entry and page directory to the page they refer to. + */ +BTFIXUPDEF_CALL_CONST(pte_t, mk_pte, struct page *, pgprot_t) + +BTFIXUPDEF_CALL_CONST(pte_t, mk_pte_phys, unsigned long, pgprot_t) +BTFIXUPDEF_CALL_CONST(pte_t, mk_pte_io, unsigned long, pgprot_t, int) + +#define mk_pte(page,pgprot) BTFIXUP_CALL(mk_pte)(page,pgprot) +#define mk_pte_phys(page,pgprot) BTFIXUP_CALL(mk_pte_phys)(page,pgprot) +#define mk_pte_io(page,pgprot,space) BTFIXUP_CALL(mk_pte_io)(page,pgprot,space) + +BTFIXUPDEF_INT(pte_modify_mask) + +extern pte_t pte_modify(pte_t pte, pgprot_t newprot) __attribute_const__; +extern __inline__ pte_t pte_modify(pte_t pte, pgprot_t newprot) +{ + return __pte((pte_val(pte) & BTFIXUP_INT(pte_modify_mask)) | + pgprot_val(newprot)); +} + +#define pgd_index(address) ((address) >> PGDIR_SHIFT) + +/* to find an entry in a page-table-directory */ +#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address)) + +/* to find an entry in a kernel page-table-directory */ +#define pgd_offset_k(address) pgd_offset(&init_mm, address) + +/* Find an entry in the second-level page table.. */ +BTFIXUPDEF_CALL(pmd_t *, pmd_offset, pgd_t *, unsigned long) +#define pmd_offset(dir,addr) BTFIXUP_CALL(pmd_offset)(dir,addr) + +/* Find an entry in the third-level page table.. */ +BTFIXUPDEF_CALL(pte_t *, pte_offset_kernel, pmd_t *, unsigned long) +#define pte_offset_kernel(dir,addr) BTFIXUP_CALL(pte_offset_kernel)(dir,addr) + +/* + * This shortcut works on sun4m (and sun4d) because the nocache area is static, + * and sun4c is guaranteed to have no highmem anyway. + */ +#define pte_offset_map(d, a) pte_offset_kernel(d,a) +#define pte_offset_map_nested(d, a) pte_offset_kernel(d,a) + +#define pte_unmap(pte) do{}while(0) +#define pte_unmap_nested(pte) do{}while(0) + +/* The permissions for pgprot_val to make a page mapped on the obio space */ +extern unsigned int pg_iobits; + +/* Certain architectures need to do special things when pte's + * within a page table are directly modified. Thus, the following + * hook is made available. + */ + +BTFIXUPDEF_CALL(void, set_pte, pte_t *, pte_t) + +#define set_pte(ptep,pteval) BTFIXUP_CALL(set_pte)(ptep,pteval) +#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval) + +struct seq_file; +BTFIXUPDEF_CALL(void, mmu_info, struct seq_file *) + +#define mmu_info(p) BTFIXUP_CALL(mmu_info)(p) + +/* Fault handler stuff... */ +#define FAULT_CODE_PROT 0x1 +#define FAULT_CODE_WRITE 0x2 +#define FAULT_CODE_USER 0x4 + +BTFIXUPDEF_CALL(void, update_mmu_cache, struct vm_area_struct *, unsigned long, pte_t) + +#define update_mmu_cache(vma,addr,pte) BTFIXUP_CALL(update_mmu_cache)(vma,addr,pte) + +BTFIXUPDEF_CALL(void, sparc_mapiorange, unsigned int, unsigned long, + unsigned long, unsigned int) +BTFIXUPDEF_CALL(void, sparc_unmapiorange, unsigned long, unsigned int) +#define sparc_mapiorange(bus,pa,va,len) BTFIXUP_CALL(sparc_mapiorange)(bus,pa,va,len) +#define sparc_unmapiorange(va,len) BTFIXUP_CALL(sparc_unmapiorange)(va,len) + +extern int invalid_segment; + +/* Encode and de-code a swap entry */ +BTFIXUPDEF_CALL(unsigned long, __swp_type, swp_entry_t) +BTFIXUPDEF_CALL(unsigned long, __swp_offset, swp_entry_t) +BTFIXUPDEF_CALL(swp_entry_t, __swp_entry, unsigned long, unsigned long) + +#define __swp_type(__x) BTFIXUP_CALL(__swp_type)(__x) +#define __swp_offset(__x) BTFIXUP_CALL(__swp_offset)(__x) +#define __swp_entry(__type,__off) BTFIXUP_CALL(__swp_entry)(__type,__off) + +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) +#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) + +/* file-offset-in-pte helpers */ +BTFIXUPDEF_CALL(unsigned long, pte_to_pgoff, pte_t pte); +BTFIXUPDEF_CALL(pte_t, pgoff_to_pte, unsigned long pgoff); + +#define pte_to_pgoff(pte) BTFIXUP_CALL(pte_to_pgoff)(pte) +#define pgoff_to_pte(off) BTFIXUP_CALL(pgoff_to_pte)(off) + +/* + * This is made a constant because mm/fremap.c required a constant. + * Note that layout of these bits is different between sun4c.c and srmmu.c. + */ +#define PTE_FILE_MAX_BITS 24 + +/* + */ +struct ctx_list { + struct ctx_list *next; + struct ctx_list *prev; + unsigned int ctx_number; + struct mm_struct *ctx_mm; +}; + +extern struct ctx_list *ctx_list_pool; /* Dynamically allocated */ +extern struct ctx_list ctx_free; /* Head of free list */ +extern struct ctx_list ctx_used; /* Head of used contexts list */ + +#define NO_CONTEXT -1 + +extern __inline__ void remove_from_ctx_list(struct ctx_list *entry) +{ + entry->next->prev = entry->prev; + entry->prev->next = entry->next; +} + +extern __inline__ void add_to_ctx_list(struct ctx_list *head, struct ctx_list *entry) +{ + entry->next = head; + (entry->prev = head->prev)->next = entry; + head->prev = entry; +} +#define add_to_free_ctxlist(entry) add_to_ctx_list(&ctx_free, entry) +#define add_to_used_ctxlist(entry) add_to_ctx_list(&ctx_used, entry) + +extern __inline__ unsigned long +__get_phys (unsigned long addr) +{ + switch (sparc_cpu_model){ + case sun4: + case sun4c: + return sun4c_get_pte (addr) << PAGE_SHIFT; + case sun4m: + case sun4d: + return ((srmmu_get_pte (addr) & 0xffffff00) << 4); + default: + return 0; + } +} + +extern __inline__ int +__get_iospace (unsigned long addr) +{ + switch (sparc_cpu_model){ + case sun4: + case sun4c: + return -1; /* Don't check iospace on sun4c */ + case sun4m: + case sun4d: + return (srmmu_get_pte (addr) >> 28); + default: + return -1; + } +} + +extern unsigned long *sparc_valid_addr_bitmap; + +/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */ +#define kern_addr_valid(addr) \ + (test_bit(__pa((unsigned long)(addr))>>20, sparc_valid_addr_bitmap)) + +extern int io_remap_page_range(struct vm_area_struct *vma, + unsigned long from, unsigned long to, + unsigned long size, pgprot_t prot, int space); +extern int io_remap_pfn_range(struct vm_area_struct *vma, + unsigned long from, unsigned long pfn, + unsigned long size, pgprot_t prot); + +/* + * For sparc32&64, the pfn in io_remap_pfn_range() carries <iospace> in + * its high 4 bits. These macros/functions put it there or get it from there. + */ +#define MK_IOSPACE_PFN(space, pfn) (pfn | (space << (BITS_PER_LONG - 4))) +#define GET_IOSPACE(pfn) (pfn >> (BITS_PER_LONG - 4)) +#define GET_PFN(pfn) (pfn & 0x0fffffffUL) + +#include <asm-generic/pgtable.h> + +#endif /* !(__ASSEMBLY__) */ + +/* We provide our own get_unmapped_area to cope with VA holes for userland */ +#define HAVE_ARCH_UNMAPPED_AREA + +/* + * No page table caches to initialise + */ +#define pgtable_cache_init() do { } while (0) + +#endif /* !(_SPARC_PGTABLE_H) */ diff --git a/include/asm-sparc/pgtsrmmu.h b/include/asm-sparc/pgtsrmmu.h new file mode 100644 index 00000000000..ee3b9d93187 --- /dev/null +++ b/include/asm-sparc/pgtsrmmu.h @@ -0,0 +1,298 @@ +/* $Id: pgtsrmmu.h,v 1.31 2000/07/16 21:48:52 anton Exp $ + * pgtsrmmu.h: SRMMU page table defines and code. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef _SPARC_PGTSRMMU_H +#define _SPARC_PGTSRMMU_H + +#include <asm/page.h> + +#ifdef __ASSEMBLY__ +#include <asm/thread_info.h> /* TI_UWINMASK for WINDOW_FLUSH */ +#endif + +/* Number of contexts is implementation-dependent; 64k is the most we support */ +#define SRMMU_MAX_CONTEXTS 65536 + +/* PMD_SHIFT determines the size of the area a second-level page table entry can map */ +#define SRMMU_REAL_PMD_SHIFT 18 +#define SRMMU_REAL_PMD_SIZE (1UL << SRMMU_REAL_PMD_SHIFT) +#define SRMMU_REAL_PMD_MASK (~(SRMMU_REAL_PMD_SIZE-1)) +#define SRMMU_REAL_PMD_ALIGN(__addr) (((__addr)+SRMMU_REAL_PMD_SIZE-1)&SRMMU_REAL_PMD_MASK) + +/* PGDIR_SHIFT determines what a third-level page table entry can map */ +#define SRMMU_PGDIR_SHIFT 24 +#define SRMMU_PGDIR_SIZE (1UL << SRMMU_PGDIR_SHIFT) +#define SRMMU_PGDIR_MASK (~(SRMMU_PGDIR_SIZE-1)) +#define SRMMU_PGDIR_ALIGN(addr) (((addr)+SRMMU_PGDIR_SIZE-1)&SRMMU_PGDIR_MASK) + +#define SRMMU_REAL_PTRS_PER_PTE 64 +#define SRMMU_REAL_PTRS_PER_PMD 64 +#define SRMMU_PTRS_PER_PGD 256 + +#define SRMMU_REAL_PTE_TABLE_SIZE (SRMMU_REAL_PTRS_PER_PTE*4) +#define SRMMU_PMD_TABLE_SIZE (SRMMU_REAL_PTRS_PER_PMD*4) +#define SRMMU_PGD_TABLE_SIZE (SRMMU_PTRS_PER_PGD*4) + +/* + * To support pagetables in highmem, Linux introduces APIs which + * return struct page* and generally manipulate page tables when + * they are not mapped into kernel space. Our hardware page tables + * are smaller than pages. We lump hardware tabes into big, page sized + * software tables. + * + * PMD_SHIFT determines the size of the area a second-level page table entry + * can map, and our pmd_t is 16 times larger than normal. The values which + * were once defined here are now generic for 4c and srmmu, so they're + * found in pgtable.h. + */ +#define SRMMU_PTRS_PER_PMD 4 + +/* Definition of the values in the ET field of PTD's and PTE's */ +#define SRMMU_ET_MASK 0x3 +#define SRMMU_ET_INVALID 0x0 +#define SRMMU_ET_PTD 0x1 +#define SRMMU_ET_PTE 0x2 +#define SRMMU_ET_REPTE 0x3 /* AIEEE, SuperSparc II reverse endian page! */ + +/* Physical page extraction from PTP's and PTE's. */ +#define SRMMU_CTX_PMASK 0xfffffff0 +#define SRMMU_PTD_PMASK 0xfffffff0 +#define SRMMU_PTE_PMASK 0xffffff00 + +/* The pte non-page bits. Some notes: + * 1) cache, dirty, valid, and ref are frobbable + * for both supervisor and user pages. + * 2) exec and write will only give the desired effect + * on user pages + * 3) use priv and priv_readonly for changing the + * characteristics of supervisor ptes + */ +#define SRMMU_CACHE 0x80 +#define SRMMU_DIRTY 0x40 +#define SRMMU_REF 0x20 +#define SRMMU_NOREAD 0x10 +#define SRMMU_EXEC 0x08 +#define SRMMU_WRITE 0x04 +#define SRMMU_VALID 0x02 /* SRMMU_ET_PTE */ +#define SRMMU_PRIV 0x1c +#define SRMMU_PRIV_RDONLY 0x18 + +#define SRMMU_FILE 0x40 /* Implemented in software */ + +#define SRMMU_PTE_FILE_SHIFT 8 /* == 32-PTE_FILE_MAX_BITS */ + +#define SRMMU_CHG_MASK (0xffffff00 | SRMMU_REF | SRMMU_DIRTY) + +/* SRMMU swap entry encoding + * + * We use 5 bits for the type and 19 for the offset. This gives us + * 32 swapfiles of 4GB each. Encoding looks like: + * + * oooooooooooooooooootttttRRRRRRRR + * fedcba9876543210fedcba9876543210 + * + * The bottom 8 bits are reserved for protection and status bits, especially + * FILE and PRESENT. + */ +#define SRMMU_SWP_TYPE_MASK 0x1f +#define SRMMU_SWP_TYPE_SHIFT SRMMU_PTE_FILE_SHIFT +#define SRMMU_SWP_OFF_MASK 0x7ffff +#define SRMMU_SWP_OFF_SHIFT (SRMMU_PTE_FILE_SHIFT + 5) + +/* Some day I will implement true fine grained access bits for + * user pages because the SRMMU gives us the capabilities to + * enforce all the protection levels that vma's can have. + * XXX But for now... + */ +#define SRMMU_PAGE_NONE __pgprot(SRMMU_CACHE | \ + SRMMU_PRIV | SRMMU_REF) +#define SRMMU_PAGE_SHARED __pgprot(SRMMU_VALID | SRMMU_CACHE | \ + SRMMU_EXEC | SRMMU_WRITE | SRMMU_REF) +#define SRMMU_PAGE_COPY __pgprot(SRMMU_VALID | SRMMU_CACHE | \ + SRMMU_EXEC | SRMMU_REF) +#define SRMMU_PAGE_RDONLY __pgprot(SRMMU_VALID | SRMMU_CACHE | \ + SRMMU_EXEC | SRMMU_REF) +#define SRMMU_PAGE_KERNEL __pgprot(SRMMU_VALID | SRMMU_CACHE | SRMMU_PRIV | \ + SRMMU_DIRTY | SRMMU_REF) + +/* SRMMU Register addresses in ASI 0x4. These are valid for all + * current SRMMU implementations that exist. + */ +#define SRMMU_CTRL_REG 0x00000000 +#define SRMMU_CTXTBL_PTR 0x00000100 +#define SRMMU_CTX_REG 0x00000200 +#define SRMMU_FAULT_STATUS 0x00000300 +#define SRMMU_FAULT_ADDR 0x00000400 + +#define WINDOW_FLUSH(tmp1, tmp2) \ + mov 0, tmp1; \ +98: ld [%g6 + TI_UWINMASK], tmp2; \ + orcc %g0, tmp2, %g0; \ + add tmp1, 1, tmp1; \ + bne 98b; \ + save %sp, -64, %sp; \ +99: subcc tmp1, 1, tmp1; \ + bne 99b; \ + restore %g0, %g0, %g0; + +#ifndef __ASSEMBLY__ + +/* This makes sense. Honest it does - Anton */ +/* XXX Yes but it's ugly as sin. FIXME. -KMW */ +extern void *srmmu_nocache_pool; +#define __nocache_pa(VADDR) (((unsigned long)VADDR) - SRMMU_NOCACHE_VADDR + __pa((unsigned long)srmmu_nocache_pool)) +#define __nocache_va(PADDR) (__va((unsigned long)PADDR) - (unsigned long)srmmu_nocache_pool + SRMMU_NOCACHE_VADDR) +#define __nocache_fix(VADDR) __va(__nocache_pa(VADDR)) + +/* Accessing the MMU control register. */ +extern __inline__ unsigned int srmmu_get_mmureg(void) +{ + unsigned int retval; + __asm__ __volatile__("lda [%%g0] %1, %0\n\t" : + "=r" (retval) : + "i" (ASI_M_MMUREGS)); + return retval; +} + +extern __inline__ void srmmu_set_mmureg(unsigned long regval) +{ + __asm__ __volatile__("sta %0, [%%g0] %1\n\t" : : + "r" (regval), "i" (ASI_M_MMUREGS) : "memory"); + +} + +extern __inline__ void srmmu_set_ctable_ptr(unsigned long paddr) +{ + paddr = ((paddr >> 4) & SRMMU_CTX_PMASK); + __asm__ __volatile__("sta %0, [%1] %2\n\t" : : + "r" (paddr), "r" (SRMMU_CTXTBL_PTR), + "i" (ASI_M_MMUREGS) : + "memory"); +} + +extern __inline__ unsigned long srmmu_get_ctable_ptr(void) +{ + unsigned int retval; + + __asm__ __volatile__("lda [%1] %2, %0\n\t" : + "=r" (retval) : + "r" (SRMMU_CTXTBL_PTR), + "i" (ASI_M_MMUREGS)); + return (retval & SRMMU_CTX_PMASK) << 4; +} + +extern __inline__ void srmmu_set_context(int context) +{ + __asm__ __volatile__("sta %0, [%1] %2\n\t" : : + "r" (context), "r" (SRMMU_CTX_REG), + "i" (ASI_M_MMUREGS) : "memory"); +} + +extern __inline__ int srmmu_get_context(void) +{ + register int retval; + __asm__ __volatile__("lda [%1] %2, %0\n\t" : + "=r" (retval) : + "r" (SRMMU_CTX_REG), + "i" (ASI_M_MMUREGS)); + return retval; +} + +extern __inline__ unsigned int srmmu_get_fstatus(void) +{ + unsigned int retval; + + __asm__ __volatile__("lda [%1] %2, %0\n\t" : + "=r" (retval) : + "r" (SRMMU_FAULT_STATUS), "i" (ASI_M_MMUREGS)); + return retval; +} + +extern __inline__ unsigned int srmmu_get_faddr(void) +{ + unsigned int retval; + + __asm__ __volatile__("lda [%1] %2, %0\n\t" : + "=r" (retval) : + "r" (SRMMU_FAULT_ADDR), "i" (ASI_M_MMUREGS)); + return retval; +} + +/* This is guaranteed on all SRMMU's. */ +extern __inline__ void srmmu_flush_whole_tlb(void) +{ + __asm__ __volatile__("sta %%g0, [%0] %1\n\t": : + "r" (0x400), /* Flush entire TLB!! */ + "i" (ASI_M_FLUSH_PROBE) : "memory"); + +} + +/* These flush types are not available on all chips... */ +extern __inline__ void srmmu_flush_tlb_ctx(void) +{ + __asm__ __volatile__("sta %%g0, [%0] %1\n\t": : + "r" (0x300), /* Flush TLB ctx.. */ + "i" (ASI_M_FLUSH_PROBE) : "memory"); + +} + +extern __inline__ void srmmu_flush_tlb_region(unsigned long addr) +{ + addr &= SRMMU_PGDIR_MASK; + __asm__ __volatile__("sta %%g0, [%0] %1\n\t": : + "r" (addr | 0x200), /* Flush TLB region.. */ + "i" (ASI_M_FLUSH_PROBE) : "memory"); + +} + + +extern __inline__ void srmmu_flush_tlb_segment(unsigned long addr) +{ + addr &= SRMMU_REAL_PMD_MASK; + __asm__ __volatile__("sta %%g0, [%0] %1\n\t": : + "r" (addr | 0x100), /* Flush TLB segment.. */ + "i" (ASI_M_FLUSH_PROBE) : "memory"); + +} + +extern __inline__ void srmmu_flush_tlb_page(unsigned long page) +{ + page &= PAGE_MASK; + __asm__ __volatile__("sta %%g0, [%0] %1\n\t": : + "r" (page), /* Flush TLB page.. */ + "i" (ASI_M_FLUSH_PROBE) : "memory"); + +} + +extern __inline__ unsigned long srmmu_hwprobe(unsigned long vaddr) +{ + unsigned long retval; + + vaddr &= PAGE_MASK; + __asm__ __volatile__("lda [%1] %2, %0\n\t" : + "=r" (retval) : + "r" (vaddr | 0x400), "i" (ASI_M_FLUSH_PROBE)); + + return retval; +} + +extern __inline__ int +srmmu_get_pte (unsigned long addr) +{ + register unsigned long entry; + + __asm__ __volatile__("\n\tlda [%1] %2,%0\n\t" : + "=r" (entry): + "r" ((addr & 0xfffff000) | 0x400), "i" (ASI_M_FLUSH_PROBE)); + return entry; +} + +extern unsigned long (*srmmu_read_physical)(unsigned long paddr); +extern void (*srmmu_write_physical)(unsigned long paddr, unsigned long word); + +#endif /* !(__ASSEMBLY__) */ + +#endif /* !(_SPARC_PGTSRMMU_H) */ diff --git a/include/asm-sparc/pgtsun4.h b/include/asm-sparc/pgtsun4.h new file mode 100644 index 00000000000..60bda107f20 --- /dev/null +++ b/include/asm-sparc/pgtsun4.h @@ -0,0 +1,171 @@ +/* $Id: pgtsun4.h,v 1.5 2000/06/05 06:08:46 anton Exp $ + * pgtsun4.h: Sun4 specific pgtable.h defines and code. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + * Copyright (C) 1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz) + */ +#ifndef _SPARC_PGTSUN4C_H +#define _SPARC_PGTSUN4C_H + +#include <asm/contregs.h> + +/* PMD_SHIFT determines the size of the area a second-level page table can map */ +#define SUN4C_PMD_SHIFT 23 + +/* PGDIR_SHIFT determines what a third-level page table entry can map */ +#define SUN4C_PGDIR_SHIFT 23 +#define SUN4C_PGDIR_SIZE (1UL << SUN4C_PGDIR_SHIFT) +#define SUN4C_PGDIR_MASK (~(SUN4C_PGDIR_SIZE-1)) +#define SUN4C_PGDIR_ALIGN(addr) (((addr)+SUN4C_PGDIR_SIZE-1)&SUN4C_PGDIR_MASK) + +/* To represent how the sun4c mmu really lays things out. */ +#define SUN4C_REAL_PGDIR_SHIFT 18 +#define SUN4C_REAL_PGDIR_SIZE (1UL << SUN4C_REAL_PGDIR_SHIFT) +#define SUN4C_REAL_PGDIR_MASK (~(SUN4C_REAL_PGDIR_SIZE-1)) +#define SUN4C_REAL_PGDIR_ALIGN(addr) (((addr)+SUN4C_REAL_PGDIR_SIZE-1)&SUN4C_REAL_PGDIR_MASK) + +/* 19 bit PFN on sun4 */ +#define SUN4C_PFN_MASK 0x7ffff + +/* Don't increase these unless the structures in sun4c.c are fixed */ +#define SUN4C_MAX_SEGMAPS 256 +#define SUN4C_MAX_CONTEXTS 16 + +/* + * To be efficient, and not have to worry about allocating such + * a huge pgd, we make the kernel sun4c tables each hold 1024 + * entries and the pgd similarly just like the i386 tables. + */ +#define SUN4C_PTRS_PER_PTE 1024 +#define SUN4C_PTRS_PER_PMD 1 +#define SUN4C_PTRS_PER_PGD 1024 + +/* + * Sparc SUN4C pte fields. + */ +#define _SUN4C_PAGE_VALID 0x80000000 +#define _SUN4C_PAGE_SILENT_READ 0x80000000 /* synonym */ +#define _SUN4C_PAGE_DIRTY 0x40000000 +#define _SUN4C_PAGE_SILENT_WRITE 0x40000000 /* synonym */ +#define _SUN4C_PAGE_PRIV 0x20000000 /* privileged page */ +#define _SUN4C_PAGE_NOCACHE 0x10000000 /* non-cacheable page */ +#define _SUN4C_PAGE_PRESENT 0x08000000 /* implemented in software */ +#define _SUN4C_PAGE_IO 0x04000000 /* I/O page */ +#define _SUN4C_PAGE_FILE 0x02000000 /* implemented in software */ +#define _SUN4C_PAGE_READ 0x00800000 /* implemented in software */ +#define _SUN4C_PAGE_WRITE 0x00400000 /* implemented in software */ +#define _SUN4C_PAGE_ACCESSED 0x00200000 /* implemented in software */ +#define _SUN4C_PAGE_MODIFIED 0x00100000 /* implemented in software */ + +#define _SUN4C_READABLE (_SUN4C_PAGE_READ|_SUN4C_PAGE_SILENT_READ|\ + _SUN4C_PAGE_ACCESSED) +#define _SUN4C_WRITEABLE (_SUN4C_PAGE_WRITE|_SUN4C_PAGE_SILENT_WRITE|\ + _SUN4C_PAGE_MODIFIED) + +#define _SUN4C_PAGE_CHG_MASK (0xffff|_SUN4C_PAGE_ACCESSED|_SUN4C_PAGE_MODIFIED) + +#define SUN4C_PAGE_NONE __pgprot(_SUN4C_PAGE_PRESENT) +#define SUN4C_PAGE_SHARED __pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE|\ + _SUN4C_PAGE_WRITE) +#define SUN4C_PAGE_COPY __pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE) +#define SUN4C_PAGE_READONLY __pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE) +#define SUN4C_PAGE_KERNEL __pgprot(_SUN4C_READABLE|_SUN4C_WRITEABLE|\ + _SUN4C_PAGE_DIRTY|_SUN4C_PAGE_PRIV) + +/* SUN4C swap entry encoding + * + * We use 5 bits for the type and 19 for the offset. This gives us + * 32 swapfiles of 4GB each. Encoding looks like: + * + * RRRRRRRRooooooooooooooooooottttt + * fedcba9876543210fedcba9876543210 + * + * The top 8 bits are reserved for protection and status bits, especially + * FILE and PRESENT. + */ +#define SUN4C_SWP_TYPE_MASK 0x1f +#define SUN4C_SWP_OFF_MASK 0x7ffff +#define SUN4C_SWP_OFF_SHIFT 5 + +#ifndef __ASSEMBLY__ + +static inline unsigned long sun4c_get_synchronous_error(void) +{ + unsigned long sync_err; + + __asm__ __volatile__("lda [%1] %2, %0\n\t" : + "=r" (sync_err) : + "r" (AC_SYNC_ERR), "i" (ASI_CONTROL)); + return sync_err; +} + +static inline unsigned long sun4c_get_synchronous_address(void) +{ + unsigned long sync_addr; + + __asm__ __volatile__("lda [%1] %2, %0\n\t" : + "=r" (sync_addr) : + "r" (AC_SYNC_VA), "i" (ASI_CONTROL)); + return sync_addr; +} + +/* SUN4 pte, segmap, and context manipulation */ +static inline unsigned long sun4c_get_segmap(unsigned long addr) +{ + register unsigned long entry; + + __asm__ __volatile__("\n\tlduha [%1] %2, %0\n\t" : + "=r" (entry) : + "r" (addr), "i" (ASI_SEGMAP)); + return entry; +} + +static inline void sun4c_put_segmap(unsigned long addr, unsigned long entry) +{ + __asm__ __volatile__("\n\tstha %1, [%0] %2; nop; nop; nop;\n\t" : : + "r" (addr), "r" (entry), + "i" (ASI_SEGMAP) + : "memory"); +} + +static inline unsigned long sun4c_get_pte(unsigned long addr) +{ + register unsigned long entry; + + __asm__ __volatile__("\n\tlda [%1] %2, %0\n\t" : + "=r" (entry) : + "r" (addr), "i" (ASI_PTE)); + return entry; +} + +static inline void sun4c_put_pte(unsigned long addr, unsigned long entry) +{ + __asm__ __volatile__("\n\tsta %1, [%0] %2; nop; nop; nop;\n\t" : : + "r" (addr), + "r" ((entry & ~(_SUN4C_PAGE_PRESENT))), "i" (ASI_PTE) + : "memory"); +} + +static inline int sun4c_get_context(void) +{ + register int ctx; + + __asm__ __volatile__("\n\tlduba [%1] %2, %0\n\t" : + "=r" (ctx) : + "r" (AC_CONTEXT), "i" (ASI_CONTROL)); + + return ctx; +} + +static inline int sun4c_set_context(int ctx) +{ + __asm__ __volatile__("\n\tstba %0, [%1] %2; nop; nop; nop;\n\t" : : + "r" (ctx), "r" (AC_CONTEXT), "i" (ASI_CONTROL) + : "memory"); + + return ctx; +} + +#endif /* !(__ASSEMBLY__) */ + +#endif /* !(_SPARC_PGTSUN4_H) */ diff --git a/include/asm-sparc/pgtsun4c.h b/include/asm-sparc/pgtsun4c.h new file mode 100644 index 00000000000..f53b6dbc5fe --- /dev/null +++ b/include/asm-sparc/pgtsun4c.h @@ -0,0 +1,172 @@ +/* $Id: pgtsun4c.h,v 1.37 2000/06/05 06:08:46 anton Exp $ + * pgtsun4c.h: Sun4c specific pgtable.h defines and code. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ +#ifndef _SPARC_PGTSUN4C_H +#define _SPARC_PGTSUN4C_H + +#include <asm/contregs.h> + +/* PMD_SHIFT determines the size of the area a second-level page table can map */ +#define SUN4C_PMD_SHIFT 22 + +/* PGDIR_SHIFT determines what a third-level page table entry can map */ +#define SUN4C_PGDIR_SHIFT 22 +#define SUN4C_PGDIR_SIZE (1UL << SUN4C_PGDIR_SHIFT) +#define SUN4C_PGDIR_MASK (~(SUN4C_PGDIR_SIZE-1)) +#define SUN4C_PGDIR_ALIGN(addr) (((addr)+SUN4C_PGDIR_SIZE-1)&SUN4C_PGDIR_MASK) + +/* To represent how the sun4c mmu really lays things out. */ +#define SUN4C_REAL_PGDIR_SHIFT 18 +#define SUN4C_REAL_PGDIR_SIZE (1UL << SUN4C_REAL_PGDIR_SHIFT) +#define SUN4C_REAL_PGDIR_MASK (~(SUN4C_REAL_PGDIR_SIZE-1)) +#define SUN4C_REAL_PGDIR_ALIGN(addr) (((addr)+SUN4C_REAL_PGDIR_SIZE-1)&SUN4C_REAL_PGDIR_MASK) + +/* 16 bit PFN on sun4c */ +#define SUN4C_PFN_MASK 0xffff + +/* Don't increase these unless the structures in sun4c.c are fixed */ +#define SUN4C_MAX_SEGMAPS 256 +#define SUN4C_MAX_CONTEXTS 16 + +/* + * To be efficient, and not have to worry about allocating such + * a huge pgd, we make the kernel sun4c tables each hold 1024 + * entries and the pgd similarly just like the i386 tables. + */ +#define SUN4C_PTRS_PER_PTE 1024 +#define SUN4C_PTRS_PER_PMD 1 +#define SUN4C_PTRS_PER_PGD 1024 + +/* + * Sparc SUN4C pte fields. + */ +#define _SUN4C_PAGE_VALID 0x80000000 +#define _SUN4C_PAGE_SILENT_READ 0x80000000 /* synonym */ +#define _SUN4C_PAGE_DIRTY 0x40000000 +#define _SUN4C_PAGE_SILENT_WRITE 0x40000000 /* synonym */ +#define _SUN4C_PAGE_PRIV 0x20000000 /* privileged page */ +#define _SUN4C_PAGE_NOCACHE 0x10000000 /* non-cacheable page */ +#define _SUN4C_PAGE_PRESENT 0x08000000 /* implemented in software */ +#define _SUN4C_PAGE_IO 0x04000000 /* I/O page */ +#define _SUN4C_PAGE_FILE 0x02000000 /* implemented in software */ +#define _SUN4C_PAGE_READ 0x00800000 /* implemented in software */ +#define _SUN4C_PAGE_WRITE 0x00400000 /* implemented in software */ +#define _SUN4C_PAGE_ACCESSED 0x00200000 /* implemented in software */ +#define _SUN4C_PAGE_MODIFIED 0x00100000 /* implemented in software */ + +#define _SUN4C_READABLE (_SUN4C_PAGE_READ|_SUN4C_PAGE_SILENT_READ|\ + _SUN4C_PAGE_ACCESSED) +#define _SUN4C_WRITEABLE (_SUN4C_PAGE_WRITE|_SUN4C_PAGE_SILENT_WRITE|\ + _SUN4C_PAGE_MODIFIED) + +#define _SUN4C_PAGE_CHG_MASK (0xffff|_SUN4C_PAGE_ACCESSED|_SUN4C_PAGE_MODIFIED) + +#define SUN4C_PAGE_NONE __pgprot(_SUN4C_PAGE_PRESENT) +#define SUN4C_PAGE_SHARED __pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE|\ + _SUN4C_PAGE_WRITE) +#define SUN4C_PAGE_COPY __pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE) +#define SUN4C_PAGE_READONLY __pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE) +#define SUN4C_PAGE_KERNEL __pgprot(_SUN4C_READABLE|_SUN4C_WRITEABLE|\ + _SUN4C_PAGE_DIRTY|_SUN4C_PAGE_PRIV) + +/* SUN4C swap entry encoding + * + * We use 5 bits for the type and 19 for the offset. This gives us + * 32 swapfiles of 4GB each. Encoding looks like: + * + * RRRRRRRRooooooooooooooooooottttt + * fedcba9876543210fedcba9876543210 + * + * The top 8 bits are reserved for protection and status bits, especially + * FILE and PRESENT. + */ +#define SUN4C_SWP_TYPE_MASK 0x1f +#define SUN4C_SWP_OFF_MASK 0x7ffff +#define SUN4C_SWP_OFF_SHIFT 5 + +#ifndef __ASSEMBLY__ + +static inline unsigned long sun4c_get_synchronous_error(void) +{ + unsigned long sync_err; + + __asm__ __volatile__("lda [%1] %2, %0\n\t" : + "=r" (sync_err) : + "r" (AC_SYNC_ERR), "i" (ASI_CONTROL)); + return sync_err; +} + +static inline unsigned long sun4c_get_synchronous_address(void) +{ + unsigned long sync_addr; + + __asm__ __volatile__("lda [%1] %2, %0\n\t" : + "=r" (sync_addr) : + "r" (AC_SYNC_VA), "i" (ASI_CONTROL)); + return sync_addr; +} + +/* SUN4C pte, segmap, and context manipulation */ +static inline unsigned long sun4c_get_segmap(unsigned long addr) +{ + register unsigned long entry; + + __asm__ __volatile__("\n\tlduba [%1] %2, %0\n\t" : + "=r" (entry) : + "r" (addr), "i" (ASI_SEGMAP)); + + return entry; +} + +static inline void sun4c_put_segmap(unsigned long addr, unsigned long entry) +{ + + __asm__ __volatile__("\n\tstba %1, [%0] %2; nop; nop; nop;\n\t" : : + "r" (addr), "r" (entry), + "i" (ASI_SEGMAP) + : "memory"); +} + +static inline unsigned long sun4c_get_pte(unsigned long addr) +{ + register unsigned long entry; + + __asm__ __volatile__("\n\tlda [%1] %2, %0\n\t" : + "=r" (entry) : + "r" (addr), "i" (ASI_PTE)); + return entry; +} + +static inline void sun4c_put_pte(unsigned long addr, unsigned long entry) +{ + __asm__ __volatile__("\n\tsta %1, [%0] %2; nop; nop; nop;\n\t" : : + "r" (addr), + "r" ((entry & ~(_SUN4C_PAGE_PRESENT))), "i" (ASI_PTE) + : "memory"); +} + +static inline int sun4c_get_context(void) +{ + register int ctx; + + __asm__ __volatile__("\n\tlduba [%1] %2, %0\n\t" : + "=r" (ctx) : + "r" (AC_CONTEXT), "i" (ASI_CONTROL)); + + return ctx; +} + +static inline int sun4c_set_context(int ctx) +{ + __asm__ __volatile__("\n\tstba %0, [%1] %2; nop; nop; nop;\n\t" : : + "r" (ctx), "r" (AC_CONTEXT), "i" (ASI_CONTROL) + : "memory"); + + return ctx; +} + +#endif /* !(__ASSEMBLY__) */ + +#endif /* !(_SPARC_PGTSUN4C_H) */ diff --git a/include/asm-sparc/poll.h b/include/asm-sparc/poll.h new file mode 100644 index 00000000000..3ddcc6481f0 --- /dev/null +++ b/include/asm-sparc/poll.h @@ -0,0 +1,23 @@ +#ifndef __SPARC_POLL_H +#define __SPARC_POLL_H + +#define POLLIN 1 +#define POLLPRI 2 +#define POLLOUT 4 +#define POLLERR 8 +#define POLLHUP 16 +#define POLLNVAL 32 +#define POLLRDNORM 64 +#define POLLWRNORM POLLOUT +#define POLLRDBAND 128 +#define POLLWRBAND 256 +#define POLLMSG 512 +#define POLLREMOVE 1024 + +struct pollfd { + int fd; + short events; + short revents; +}; + +#endif diff --git a/include/asm-sparc/posix_types.h b/include/asm-sparc/posix_types.h new file mode 100644 index 00000000000..9ef1b3db4cb --- /dev/null +++ b/include/asm-sparc/posix_types.h @@ -0,0 +1,122 @@ +#ifndef __ARCH_SPARC_POSIX_TYPES_H +#define __ARCH_SPARC_POSIX_TYPES_H + +/* + * This file is generally used by user-level software, so you need to + * be a little careful about namespace pollution etc. Also, we cannot + * assume GCC is being used. + */ + +typedef unsigned int __kernel_size_t; +typedef int __kernel_ssize_t; +typedef long int __kernel_ptrdiff_t; +typedef long __kernel_time_t; +typedef long __kernel_suseconds_t; +typedef long __kernel_clock_t; +typedef int __kernel_pid_t; +typedef unsigned short __kernel_ipc_pid_t; +typedef unsigned short __kernel_uid_t; +typedef unsigned short __kernel_gid_t; +typedef unsigned long __kernel_ino_t; +typedef unsigned short __kernel_mode_t; +typedef unsigned short __kernel_umode_t; +typedef short __kernel_nlink_t; +typedef long __kernel_daddr_t; +typedef long __kernel_off_t; +typedef char * __kernel_caddr_t; +typedef unsigned short __kernel_uid16_t; +typedef unsigned short __kernel_gid16_t; +typedef unsigned int __kernel_uid32_t; +typedef unsigned int __kernel_gid32_t; +typedef unsigned short __kernel_old_uid_t; +typedef unsigned short __kernel_old_gid_t; +typedef unsigned short __kernel_old_dev_t; +typedef int __kernel_clockid_t; +typedef int __kernel_timer_t; + +#ifdef __GNUC__ +typedef long long __kernel_loff_t; +#endif + +typedef struct { +#if defined(__KERNEL__) || defined(__USE_ALL) + int val[2]; +#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */ + int __val[2]; +#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */ +} __kernel_fsid_t; + +#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) + +#undef __FD_SET +static __inline__ void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp) +{ + unsigned long _tmp = fd / __NFDBITS; + unsigned long _rem = fd % __NFDBITS; + fdsetp->fds_bits[_tmp] |= (1UL<<_rem); +} + +#undef __FD_CLR +static __inline__ void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp) +{ + unsigned long _tmp = fd / __NFDBITS; + unsigned long _rem = fd % __NFDBITS; + fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem); +} + +#undef __FD_ISSET +static __inline__ int __FD_ISSET(unsigned long fd, __const__ __kernel_fd_set *p) +{ + unsigned long _tmp = fd / __NFDBITS; + unsigned long _rem = fd % __NFDBITS; + return (p->fds_bits[_tmp] & (1UL<<_rem)) != 0; +} + +/* + * This will unroll the loop for the normal constant cases (8 or 32 longs, + * for 256 and 1024-bit fd_sets respectively) + */ +#undef __FD_ZERO +static __inline__ void __FD_ZERO(__kernel_fd_set *p) +{ + unsigned long *tmp = p->fds_bits; + int i; + + if (__builtin_constant_p(__FDSET_LONGS)) { + switch (__FDSET_LONGS) { + case 32: + tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0; + tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0; + tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0; + tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0; + tmp[16] = 0; tmp[17] = 0; tmp[18] = 0; tmp[19] = 0; + tmp[20] = 0; tmp[21] = 0; tmp[22] = 0; tmp[23] = 0; + tmp[24] = 0; tmp[25] = 0; tmp[26] = 0; tmp[27] = 0; + tmp[28] = 0; tmp[29] = 0; tmp[30] = 0; tmp[31] = 0; + return; + case 16: + tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0; + tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0; + tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0; + tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0; + return; + case 8: + tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0; + tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0; + return; + case 4: + tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0; + return; + } + } + i = __FDSET_LONGS; + while (i) { + i--; + *tmp = 0; + tmp++; + } +} + +#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */ + +#endif /* !(__ARCH_SPARC_POSIX_TYPES_H) */ diff --git a/include/asm-sparc/processor.h b/include/asm-sparc/processor.h new file mode 100644 index 00000000000..32c9699367c --- /dev/null +++ b/include/asm-sparc/processor.h @@ -0,0 +1,130 @@ +/* $Id: processor.h,v 1.83 2001/10/08 09:32:13 davem Exp $ + * include/asm-sparc/processor.h + * + * Copyright (C) 1994 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef __ASM_SPARC_PROCESSOR_H +#define __ASM_SPARC_PROCESSOR_H + +/* + * Sparc32 implementation of macro that returns current + * instruction pointer ("program counter"). + */ +#define current_text_addr() ({ void *pc; __asm__("sethi %%hi(1f), %0; or %0, %%lo(1f), %0;\n1:" : "=r" (pc)); pc; }) + +#include <linux/a.out.h> + +#include <asm/psr.h> +#include <asm/ptrace.h> +#include <asm/head.h> +#include <asm/signal.h> +#include <asm/segment.h> +#include <asm/btfixup.h> +#include <asm/page.h> + +/* + * The sparc has no problems with write protection + */ +#define wp_works_ok 1 +#define wp_works_ok__is_a_macro /* for versions in ksyms.c */ + +/* Whee, this is STACK_TOP + PAGE_SIZE and the lowest kernel address too... + * That one page is used to protect kernel from intruders, so that + * we can make our access_ok test faster + */ +#define TASK_SIZE PAGE_OFFSET + +struct task_struct; + +#ifdef __KERNEL__ +struct fpq { + unsigned long *insn_addr; + unsigned long insn; +}; +#endif + +typedef struct { + int seg; +} mm_segment_t; + +/* The Sparc processor specific thread struct. */ +struct thread_struct { + struct pt_regs *kregs; + unsigned int _pad1; + + /* Special child fork kpsr/kwim values. */ + unsigned long fork_kpsr __attribute__ ((aligned (8))); + unsigned long fork_kwim; + + /* Floating point regs */ + unsigned long float_regs[32] __attribute__ ((aligned (8))); + unsigned long fsr; + unsigned long fpqdepth; + struct fpq fpqueue[16]; + unsigned long flags; + mm_segment_t current_ds; + struct exec core_exec; /* just what it says. */ + int new_signal; +}; + +#define SPARC_FLAG_KTHREAD 0x1 /* task is a kernel thread */ +#define SPARC_FLAG_UNALIGNED 0x2 /* is allowed to do unaligned accesses */ + +#define INIT_THREAD { \ + .flags = SPARC_FLAG_KTHREAD, \ + .current_ds = KERNEL_DS, \ +} + +/* Return saved PC of a blocked thread. */ +extern unsigned long thread_saved_pc(struct task_struct *t); + +/* Do necessary setup to start up a newly executed thread. */ +extern __inline__ void start_thread(struct pt_regs * regs, unsigned long pc, + unsigned long sp) +{ + register unsigned long zero asm("g1"); + + regs->psr = (regs->psr & (PSR_CWP)) | PSR_S; + regs->pc = ((pc & (~3)) - 4); + regs->npc = regs->pc + 4; + regs->y = 0; + zero = 0; + __asm__ __volatile__("std\t%%g0, [%0 + %3 + 0x00]\n\t" + "std\t%%g0, [%0 + %3 + 0x08]\n\t" + "std\t%%g0, [%0 + %3 + 0x10]\n\t" + "std\t%%g0, [%0 + %3 + 0x18]\n\t" + "std\t%%g0, [%0 + %3 + 0x20]\n\t" + "std\t%%g0, [%0 + %3 + 0x28]\n\t" + "std\t%%g0, [%0 + %3 + 0x30]\n\t" + "st\t%1, [%0 + %3 + 0x38]\n\t" + "st\t%%g0, [%0 + %3 + 0x3c]" + : /* no outputs */ + : "r" (regs), + "r" (sp - sizeof(struct reg_window)), + "r" (zero), + "i" ((const unsigned long)(&((struct pt_regs *)0)->u_regs[0])) + : "memory"); +} + +/* Free all resources held by a thread. */ +#define release_thread(tsk) do { } while(0) +extern pid_t kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); + +/* Prepare to copy thread state - unlazy all lazy status */ +#define prepare_to_copy(tsk) do { } while (0) + +extern unsigned long get_wchan(struct task_struct *); + +#define KSTK_EIP(tsk) ((tsk)->thread.kregs->pc) +#define KSTK_ESP(tsk) ((tsk)->thread.kregs->u_regs[UREG_FP]) + +#ifdef __KERNEL__ + +extern struct task_struct *last_task_used_math; + +#define cpu_relax() barrier() + +#endif + +#endif /* __ASM_SPARC_PROCESSOR_H */ diff --git a/include/asm-sparc/psr.h b/include/asm-sparc/psr.h new file mode 100644 index 00000000000..9778b8c8b15 --- /dev/null +++ b/include/asm-sparc/psr.h @@ -0,0 +1,92 @@ +/* $Id: psr.h,v 1.15 1997/10/04 08:54:22 ecd Exp $ + * psr.h: This file holds the macros for masking off various parts of + * the processor status register on the Sparc. This is valid + * for Version 8. On the V9 this is renamed to the PSTATE + * register and its members are accessed as fields like + * PSTATE.PRIV for the current CPU privilege level. + * + * Copyright (C) 1994 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef __LINUX_SPARC_PSR_H +#define __LINUX_SPARC_PSR_H + +/* The Sparc PSR fields are laid out as the following: + * + * ------------------------------------------------------------------------ + * | impl | vers | icc | resv | EC | EF | PIL | S | PS | ET | CWP | + * | 31-28 | 27-24 | 23-20 | 19-14 | 13 | 12 | 11-8 | 7 | 6 | 5 | 4-0 | + * ------------------------------------------------------------------------ + */ +#define PSR_CWP 0x0000001f /* current window pointer */ +#define PSR_ET 0x00000020 /* enable traps field */ +#define PSR_PS 0x00000040 /* previous privilege level */ +#define PSR_S 0x00000080 /* current privilege level */ +#define PSR_PIL 0x00000f00 /* processor interrupt level */ +#define PSR_EF 0x00001000 /* enable floating point */ +#define PSR_EC 0x00002000 /* enable co-processor */ +#define PSR_LE 0x00008000 /* SuperSparcII little-endian */ +#define PSR_ICC 0x00f00000 /* integer condition codes */ +#define PSR_C 0x00100000 /* carry bit */ +#define PSR_V 0x00200000 /* overflow bit */ +#define PSR_Z 0x00400000 /* zero bit */ +#define PSR_N 0x00800000 /* negative bit */ +#define PSR_VERS 0x0f000000 /* cpu-version field */ +#define PSR_IMPL 0xf0000000 /* cpu-implementation field */ + +#ifdef __KERNEL__ + +#ifndef __ASSEMBLY__ +/* Get the %psr register. */ +extern __inline__ unsigned int get_psr(void) +{ + unsigned int psr; + __asm__ __volatile__( + "rd %%psr, %0\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + : "=r" (psr) + : /* no inputs */ + : "memory"); + + return psr; +} + +extern __inline__ void put_psr(unsigned int new_psr) +{ + __asm__ __volatile__( + "wr %0, 0x0, %%psr\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + : /* no outputs */ + : "r" (new_psr) + : "memory", "cc"); +} + +/* Get the %fsr register. Be careful, make sure the floating point + * enable bit is set in the %psr when you execute this or you will + * incur a trap. + */ + +extern unsigned int fsr_storage; + +extern __inline__ unsigned int get_fsr(void) +{ + unsigned int fsr = 0; + + __asm__ __volatile__( + "st %%fsr, %1\n\t" + "ld %1, %0\n\t" + : "=r" (fsr) + : "m" (fsr_storage)); + + return fsr; +} + +#endif /* !(__ASSEMBLY__) */ + +#endif /* (__KERNEL__) */ + +#endif /* !(__LINUX_SPARC_PSR_H) */ diff --git a/include/asm-sparc/ptrace.h b/include/asm-sparc/ptrace.h new file mode 100644 index 00000000000..dd9d94d7e0a --- /dev/null +++ b/include/asm-sparc/ptrace.h @@ -0,0 +1,167 @@ +/* $Id: ptrace.h,v 1.25 1997/03/04 16:27:25 jj Exp $ */ +#ifndef _SPARC_PTRACE_H +#define _SPARC_PTRACE_H + +#include <asm/psr.h> + +/* This struct defines the way the registers are stored on the + * stack during a system call and basically all traps. + */ + +#ifndef __ASSEMBLY__ + +struct pt_regs { + unsigned long psr; + unsigned long pc; + unsigned long npc; + unsigned long y; + unsigned long u_regs[16]; /* globals and ins */ +}; + +#define UREG_G0 0 +#define UREG_G1 1 +#define UREG_G2 2 +#define UREG_G3 3 +#define UREG_G4 4 +#define UREG_G5 5 +#define UREG_G6 6 +#define UREG_G7 7 +#define UREG_I0 8 +#define UREG_I1 9 +#define UREG_I2 10 +#define UREG_I3 11 +#define UREG_I4 12 +#define UREG_I5 13 +#define UREG_I6 14 +#define UREG_I7 15 +#define UREG_WIM UREG_G0 +#define UREG_FADDR UREG_G0 +#define UREG_FP UREG_I6 +#define UREG_RETPC UREG_I7 + +/* A register window */ +struct reg_window { + unsigned long locals[8]; + unsigned long ins[8]; +}; + +/* A Sparc stack frame */ +struct sparc_stackf { + unsigned long locals[8]; + unsigned long ins[6]; + struct sparc_stackf *fp; + unsigned long callers_pc; + char *structptr; + unsigned long xargs[6]; + unsigned long xxargs[1]; +}; + +#define TRACEREG_SZ sizeof(struct pt_regs) +#define STACKFRAME_SZ sizeof(struct sparc_stackf) + +#ifdef __KERNEL__ +#define user_mode(regs) (!((regs)->psr & PSR_PS)) +#define instruction_pointer(regs) ((regs)->pc) +unsigned long profile_pc(struct pt_regs *); +extern void show_regs(struct pt_regs *); +#endif + +#else /* __ASSEMBLY__ */ +/* For assembly code. */ +#define TRACEREG_SZ 0x50 +#define STACKFRAME_SZ 0x60 +#endif + +/* + * The asm_offsets.h is a generated file, so we cannot include it. + * It may be OK for glibc headers, but it's utterly pointless for C code. + * The assembly code using those offsets has to include it explicitly. + */ +/* #include <asm/asm_offsets.h> */ + +/* These are for pt_regs. */ +#define PT_PSR 0x0 +#define PT_PC 0x4 +#define PT_NPC 0x8 +#define PT_Y 0xc +#define PT_G0 0x10 +#define PT_WIM PT_G0 +#define PT_G1 0x14 +#define PT_G2 0x18 +#define PT_G3 0x1c +#define PT_G4 0x20 +#define PT_G5 0x24 +#define PT_G6 0x28 +#define PT_G7 0x2c +#define PT_I0 0x30 +#define PT_I1 0x34 +#define PT_I2 0x38 +#define PT_I3 0x3c +#define PT_I4 0x40 +#define PT_I5 0x44 +#define PT_I6 0x48 +#define PT_FP PT_I6 +#define PT_I7 0x4c + +/* Reg_window offsets */ +#define RW_L0 0x00 +#define RW_L1 0x04 +#define RW_L2 0x08 +#define RW_L3 0x0c +#define RW_L4 0x10 +#define RW_L5 0x14 +#define RW_L6 0x18 +#define RW_L7 0x1c +#define RW_I0 0x20 +#define RW_I1 0x24 +#define RW_I2 0x28 +#define RW_I3 0x2c +#define RW_I4 0x30 +#define RW_I5 0x34 +#define RW_I6 0x38 +#define RW_I7 0x3c + +/* Stack_frame offsets */ +#define SF_L0 0x00 +#define SF_L1 0x04 +#define SF_L2 0x08 +#define SF_L3 0x0c +#define SF_L4 0x10 +#define SF_L5 0x14 +#define SF_L6 0x18 +#define SF_L7 0x1c +#define SF_I0 0x20 +#define SF_I1 0x24 +#define SF_I2 0x28 +#define SF_I3 0x2c +#define SF_I4 0x30 +#define SF_I5 0x34 +#define SF_FP 0x38 +#define SF_PC 0x3c +#define SF_RETP 0x40 +#define SF_XARG0 0x44 +#define SF_XARG1 0x48 +#define SF_XARG2 0x4c +#define SF_XARG3 0x50 +#define SF_XARG4 0x54 +#define SF_XARG5 0x58 +#define SF_XXARG 0x5c + +/* Stuff for the ptrace system call */ +#define PTRACE_SUNATTACH 10 +#define PTRACE_SUNDETACH 11 +#define PTRACE_GETREGS 12 +#define PTRACE_SETREGS 13 +#define PTRACE_GETFPREGS 14 +#define PTRACE_SETFPREGS 15 +#define PTRACE_READDATA 16 +#define PTRACE_WRITEDATA 17 +#define PTRACE_READTEXT 18 +#define PTRACE_WRITETEXT 19 +#define PTRACE_GETFPAREGS 20 +#define PTRACE_SETFPAREGS 21 + +#define PTRACE_GETUCODE 29 /* stupid bsd-ism */ + + +#endif /* !(_SPARC_PTRACE_H) */ diff --git a/include/asm-sparc/reg.h b/include/asm-sparc/reg.h new file mode 100644 index 00000000000..ed60ebec593 --- /dev/null +++ b/include/asm-sparc/reg.h @@ -0,0 +1,79 @@ +/* + * linux/asm-sparc/reg.h + * Layout of the registers as expected by gdb on the Sparc + * we should replace the user.h definitions with those in + * this file, we don't even use the other + * -miguel + * + * The names of the structures, constants and aliases in this file + * have the same names as the sunos ones, some programs rely on these + * names (gdb for example). + * + */ + +#ifndef __SPARC_REG_H +#define __SPARC_REG_H + +struct regs { + int r_psr; +#define r_ps r_psr + int r_pc; + int r_npc; + int r_y; + int r_g1; + int r_g2; + int r_g3; + int r_g4; + int r_g5; + int r_g6; + int r_g7; + int r_o0; + int r_o1; + int r_o2; + int r_o3; + int r_o4; + int r_o5; + int r_o6; + int r_o7; +}; + +struct fpq { + unsigned long *addr; + unsigned long instr; +}; + +struct fq { + union { + double whole; + struct fpq fpq; + } FQu; +}; + +#define FPU_REGS_TYPE unsigned int +#define FPU_FSR_TYPE unsigned + +struct fp_status { + union { + FPU_REGS_TYPE Fpu_regs[32]; + double Fpu_dregs[16]; + } fpu_fr; + FPU_FSR_TYPE Fpu_fsr; + unsigned Fpu_flags; + unsigned Fpu_extra; + unsigned Fpu_qcnt; + struct fq Fpu_q[16]; +}; + +#define fpu_regs f_fpstatus.fpu_fr.Fpu_regs +#define fpu_dregs f_fpstatus.fpu_fr.Fpu_dregs +#define fpu_fsr f_fpstatus.Fpu_fsr +#define fpu_flags f_fpstatus.Fpu_flags +#define fpu_extra f_fpstatus.Fpu_extra +#define fpu_q f_fpstatus.Fpu_q +#define fpu_qcnt f_fpstatus.Fpu_qcnt + +struct fpu { + struct fp_status f_fpstatus; +}; + +#endif /* __SPARC_REG_H */ diff --git a/include/asm-sparc/resource.h b/include/asm-sparc/resource.h new file mode 100644 index 00000000000..0514c304e13 --- /dev/null +++ b/include/asm-sparc/resource.h @@ -0,0 +1,26 @@ +/* $Id: resource.h,v 1.12 2000/09/23 02:09:21 davem Exp $ + * resource.h: Resource definitions. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef _SPARC_RESOURCE_H +#define _SPARC_RESOURCE_H + +/* + * These two resource limit IDs have a Sparc/Linux-specific ordering, + * the rest comes from the generic header: + */ +#define RLIMIT_NOFILE 6 /* max number of open files */ +#define RLIMIT_NPROC 7 /* max number of processes */ + +/* + * SuS says limits have to be unsigned. + * We make this unsigned, but keep the + * old value for compatibility: + */ +#define RLIM_INFINITY 0x7fffffff + +#include <asm-generic/resource.h> + +#endif /* !(_SPARC_RESOURCE_H) */ diff --git a/include/asm-sparc/ross.h b/include/asm-sparc/ross.h new file mode 100644 index 00000000000..f2c14b5080e --- /dev/null +++ b/include/asm-sparc/ross.h @@ -0,0 +1,191 @@ +/* $Id: ross.h,v 1.13 1998/01/07 06:49:11 baccala Exp $ + * ross.h: Ross module specific definitions and defines. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef _SPARC_ROSS_H +#define _SPARC_ROSS_H + +#include <asm/asi.h> +#include <asm/page.h> + +/* Ross made Hypersparcs have a %psr 'impl' field of '0001'. The 'vers' + * field has '1111'. + */ + +/* The MMU control register fields on the HyperSparc. + * + * ----------------------------------------------------------------- + * |implvers| RSV |CWR|SE|WBE| MID |BM| C|CS|MR|CM|RSV|CE|RSV|NF|ME| + * ----------------------------------------------------------------- + * 31 24 23-22 21 20 19 18-15 14 13 12 11 10 9 8 7-2 1 0 + * + * Phew, lots of fields there ;-) + * + * CWR: Cache Wrapping Enabled, if one cache wrapping is on. + * SE: Snoop Enable, turns on bus snooping for cache activity if one. + * WBE: Write Buffer Enable, one turns it on. + * MID: The ModuleID of the chip for MBus transactions. + * BM: Boot-Mode. One indicates the MMU is in boot mode. + * C: Indicates whether accesses are cachable while the MMU is + * disabled. + * CS: Cache Size -- 0 = 128k, 1 = 256k + * MR: Memory Reflection, one indicates that the memory bus connected + * to the MBus supports memory reflection. + * CM: Cache Mode -- 0 = write-through, 1 = copy-back + * CE: Cache Enable -- 0 = no caching, 1 = cache is on + * NF: No Fault -- 0 = faults trap the CPU from supervisor mode + * 1 = faults from supervisor mode do not generate traps + * ME: MMU Enable -- 0 = MMU is off, 1 = MMU is on + */ + +#define HYPERSPARC_CWENABLE 0x00200000 +#define HYPERSPARC_SBENABLE 0x00100000 +#define HYPERSPARC_WBENABLE 0x00080000 +#define HYPERSPARC_MIDMASK 0x00078000 +#define HYPERSPARC_BMODE 0x00004000 +#define HYPERSPARC_ACENABLE 0x00002000 +#define HYPERSPARC_CSIZE 0x00001000 +#define HYPERSPARC_MRFLCT 0x00000800 +#define HYPERSPARC_CMODE 0x00000400 +#define HYPERSPARC_CENABLE 0x00000100 +#define HYPERSPARC_NFAULT 0x00000002 +#define HYPERSPARC_MENABLE 0x00000001 + + +/* The ICCR instruction cache register on the HyperSparc. + * + * ----------------------------------------------- + * | | FTD | ICE | + * ----------------------------------------------- + * 31 1 0 + * + * This register is accessed using the V8 'wrasr' and 'rdasr' + * opcodes, since not all assemblers understand them and those + * that do use different semantics I will just hard code the + * instruction with a '.word' statement. + * + * FTD: If set to one flush instructions executed during an + * instruction cache hit occurs, the corresponding line + * for said cache-hit is invalidated. If FTD is zero, + * an unimplemented 'flush' trap will occur when any + * flush is executed by the processor. + * + * ICE: If set to one, the instruction cache is enabled. If + * zero, the cache will not be used for instruction fetches. + * + * All other bits are read as zeros, and writes to them have no + * effect. + * + * Wheee, not many assemblers understand the %iccr register nor + * the generic asr r/w instructions. + * + * 1000 0011 0100 0111 1100 0000 0000 0000 ! rd %iccr, %g1 + * + * 0x 8 3 4 7 c 0 0 0 ! 0x8347c000 + * + * 1011 1111 1000 0000 0110 0000 0000 0000 ! wr %g1, 0x0, %iccr + * + * 0x b f 8 0 6 0 0 0 ! 0xbf806000 + * + */ + +#define HYPERSPARC_ICCR_FTD 0x00000002 +#define HYPERSPARC_ICCR_ICE 0x00000001 + +#ifndef __ASSEMBLY__ + +static inline unsigned int get_ross_icr(void) +{ + unsigned int icreg; + + __asm__ __volatile__(".word 0x8347c000\n\t" /* rd %iccr, %g1 */ + "mov %%g1, %0\n\t" + : "=r" (icreg) + : /* no inputs */ + : "g1", "memory"); + + return icreg; +} + +static inline void put_ross_icr(unsigned int icreg) +{ + __asm__ __volatile__("or %%g0, %0, %%g1\n\t" + ".word 0xbf806000\n\t" /* wr %g1, 0x0, %iccr */ + "nop\n\t" + "nop\n\t" + "nop\n\t" + : /* no outputs */ + : "r" (icreg) + : "g1", "memory"); + + return; +} + +/* HyperSparc specific cache flushing. */ + +/* This is for the on-chip instruction cache. */ +static inline void hyper_flush_whole_icache(void) +{ + __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t" + : /* no outputs */ + : "i" (ASI_M_FLUSH_IWHOLE) + : "memory"); + return; +} + +extern int vac_cache_size; +extern int vac_line_size; + +static inline void hyper_clear_all_tags(void) +{ + unsigned long addr; + + for(addr = 0; addr < vac_cache_size; addr += vac_line_size) + __asm__ __volatile__("sta %%g0, [%0] %1\n\t" + : /* no outputs */ + : "r" (addr), "i" (ASI_M_DATAC_TAG) + : "memory"); +} + +static inline void hyper_flush_unconditional_combined(void) +{ + unsigned long addr; + + for (addr = 0; addr < vac_cache_size; addr += vac_line_size) + __asm__ __volatile__("sta %%g0, [%0] %1\n\t" + : /* no outputs */ + : "r" (addr), "i" (ASI_M_FLUSH_CTX) + : "memory"); +} + +static inline void hyper_flush_cache_user(void) +{ + unsigned long addr; + + for (addr = 0; addr < vac_cache_size; addr += vac_line_size) + __asm__ __volatile__("sta %%g0, [%0] %1\n\t" + : /* no outputs */ + : "r" (addr), "i" (ASI_M_FLUSH_USER) + : "memory"); +} + +static inline void hyper_flush_cache_page(unsigned long page) +{ + unsigned long end; + + page &= PAGE_MASK; + end = page + PAGE_SIZE; + while (page < end) { + __asm__ __volatile__("sta %%g0, [%0] %1\n\t" + : /* no outputs */ + : "r" (page), "i" (ASI_M_FLUSH_PAGE) + : "memory"); + page += vac_line_size; + } +} + +#endif /* !(__ASSEMBLY__) */ + +#endif /* !(_SPARC_ROSS_H) */ diff --git a/include/asm-sparc/rtc.h b/include/asm-sparc/rtc.h new file mode 100644 index 00000000000..f4f261dde69 --- /dev/null +++ b/include/asm-sparc/rtc.h @@ -0,0 +1,27 @@ +/* $Id: rtc.h,v 1.2 1996/08/21 23:17:39 ecd Exp $ + * + * rtc.h: Definitions for access to the Mostek real time clock + * + * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu) + */ + +#ifndef _RTC_H +#define _RTC_H + +#include <linux/ioctl.h> + +struct rtc_time +{ + int sec; /* Seconds (0-59) */ + int min; /* Minutes (0-59) */ + int hour; /* Hour (0-23) */ + int dow; /* Day of the week (1-7) */ + int dom; /* Day of the month (1-31) */ + int month; /* Month of year (1-12) */ + int year; /* Year (0-99) */ +}; + +#define RTCGET _IOR('p', 20, struct rtc_time) +#define RTCSET _IOW('p', 21, struct rtc_time) + +#endif diff --git a/include/asm-sparc/sbi.h b/include/asm-sparc/sbi.h new file mode 100644 index 00000000000..739ccac5dcf --- /dev/null +++ b/include/asm-sparc/sbi.h @@ -0,0 +1,115 @@ +/* $Id: sbi.h,v 1.2 1998/03/09 14:04:48 jj Exp $ + * sbi.h: SBI (Sbus Interface on sun4d) definitions + * + * Copyright (C) 1997 Jakub Jelinek <jj@sunsite.mff.cuni.cz> + */ + +#ifndef _SPARC_SBI_H +#define _SPARC_SBI_H + +#include <asm/obio.h> + +/* SBI */ +struct sbi_regs { +/* 0x0000 */ u32 cid; /* Component ID */ +/* 0x0004 */ u32 ctl; /* Control */ +/* 0x0008 */ u32 status; /* Status */ + u32 _unused1; + +/* 0x0010 */ u32 cfg0; /* Slot0 config reg */ +/* 0x0014 */ u32 cfg1; /* Slot1 config reg */ +/* 0x0018 */ u32 cfg2; /* Slot2 config reg */ +/* 0x001c */ u32 cfg3; /* Slot3 config reg */ + +/* 0x0020 */ u32 stb0; /* Streaming buf control for slot 0 */ +/* 0x0024 */ u32 stb1; /* Streaming buf control for slot 1 */ +/* 0x0028 */ u32 stb2; /* Streaming buf control for slot 2 */ +/* 0x002c */ u32 stb3; /* Streaming buf control for slot 3 */ + +/* 0x0030 */ u32 intr_state; /* Interrupt state */ +/* 0x0034 */ u32 intr_tid; /* Interrupt target ID */ +/* 0x0038 */ u32 intr_diag; /* Interrupt diagnostics */ +}; + +#define SBI_CID 0x02800000 +#define SBI_CTL 0x02800004 +#define SBI_STATUS 0x02800008 +#define SBI_CFG0 0x02800010 +#define SBI_CFG1 0x02800014 +#define SBI_CFG2 0x02800018 +#define SBI_CFG3 0x0280001c +#define SBI_STB0 0x02800020 +#define SBI_STB1 0x02800024 +#define SBI_STB2 0x02800028 +#define SBI_STB3 0x0280002c +#define SBI_INTR_STATE 0x02800030 +#define SBI_INTR_TID 0x02800034 +#define SBI_INTR_DIAG 0x02800038 + +/* Burst bits for 8, 16, 32, 64 are in cfgX registers at bits 2, 3, 4, 5 respectively */ +#define SBI_CFG_BURST_MASK 0x0000001e + +/* How to make devid from sbi no */ +#define SBI2DEVID(sbino) ((sbino<<4)|2) + +/* intr_state has 4 bits for slots 0 .. 3 and these bits are repeated for each sbus irq level + * + * +-------+-------+-------+-------+-------+-------+-------+-------+ + * SBUS IRQ LEVEL | 7 | 6 | 5 | 4 | 3 | 2 | 1 | | + * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Reser | + * SLOT # |3|2|1|0|3|2|1|0|3|2|1|0|3|2|1|0|3|2|1|0|3|2|1|0|3|2|1|0| ved | + * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-------+ + * Bits 31 27 23 19 15 11 7 3 0 + */ + + +#ifndef __ASSEMBLY__ + +extern __inline__ int acquire_sbi(int devid, int mask) +{ + __asm__ __volatile__ ("swapa [%2] %3, %0" : + "=r" (mask) : + "0" (mask), + "r" (ECSR_DEV_BASE(devid) | SBI_INTR_STATE), + "i" (ASI_M_CTL)); + return mask; +} + +extern __inline__ void release_sbi(int devid, int mask) +{ + __asm__ __volatile__ ("sta %0, [%1] %2" : : + "r" (mask), + "r" (ECSR_DEV_BASE(devid) | SBI_INTR_STATE), + "i" (ASI_M_CTL)); +} + +extern __inline__ void set_sbi_tid(int devid, int targetid) +{ + __asm__ __volatile__ ("sta %0, [%1] %2" : : + "r" (targetid), + "r" (ECSR_DEV_BASE(devid) | SBI_INTR_TID), + "i" (ASI_M_CTL)); +} + +extern __inline__ int get_sbi_ctl(int devid, int cfgno) +{ + int cfg; + + __asm__ __volatile__ ("lda [%1] %2, %0" : + "=r" (cfg) : + "r" ((ECSR_DEV_BASE(devid) | SBI_CFG0) + (cfgno<<2)), + "i" (ASI_M_CTL)); + return cfg; +} + +extern __inline__ void set_sbi_ctl(int devid, int cfgno, int cfg) +{ + __asm__ __volatile__ ("sta %0, [%1] %2" : : + "r" (cfg), + "r" ((ECSR_DEV_BASE(devid) | SBI_CFG0) + (cfgno<<2)), + "i" (ASI_M_CTL)); +} + +#endif /* !__ASSEMBLY__ */ + +#endif /* !(_SPARC_SBI_H) */ diff --git a/include/asm-sparc/sbus.h b/include/asm-sparc/sbus.h new file mode 100644 index 00000000000..3a8b3908728 --- /dev/null +++ b/include/asm-sparc/sbus.h @@ -0,0 +1,142 @@ +/* $Id: sbus.h,v 1.22 2000/02/18 13:50:50 davem Exp $ + * sbus.h: Defines for the Sun SBus. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef _SPARC_SBUS_H +#define _SPARC_SBUS_H + +#include <linux/dma-mapping.h> +#include <linux/ioport.h> + +#include <asm/oplib.h> +/* #include <asm/iommu.h> */ /* Unused since we use opaque iommu (|io-unit) */ +#include <asm/scatterlist.h> + +/* We scan which devices are on the SBus using the PROM node device + * tree. SBus devices are described in two different ways. You can + * either get an absolute address at which to access the device, or + * you can get a SBus 'slot' number and an offset within that slot. + */ + +/* The base address at which to calculate device OBIO addresses. */ +#define SUN_SBUS_BVADDR 0xf8000000 +#define SBUS_OFF_MASK 0x01ffffff + +/* These routines are used to calculate device address from slot + * numbers + offsets, and vice versa. + */ + +extern __inline__ unsigned long sbus_devaddr(int slotnum, unsigned long offset) +{ + return (unsigned long) (SUN_SBUS_BVADDR+((slotnum)<<25)+(offset)); +} + +extern __inline__ int sbus_dev_slot(unsigned long dev_addr) +{ + return (int) (((dev_addr)-SUN_SBUS_BVADDR)>>25); +} + +struct sbus_bus; + +/* Linux SBUS device tables */ +struct sbus_dev { + struct sbus_bus *bus; /* Back ptr to sbus */ + struct sbus_dev *next; /* next device on this SBus or null */ + struct sbus_dev *child; /* For ledma and espdma on sun4m */ + struct sbus_dev *parent; /* Parent device if not toplevel */ + int prom_node; /* PROM device tree node for this device */ + char prom_name[64]; /* PROM device name */ + int slot; + + struct resource resource[PROMREG_MAX]; + + struct linux_prom_registers reg_addrs[PROMREG_MAX]; + int num_registers, ranges_applied; + + struct linux_prom_ranges device_ranges[PROMREG_MAX]; + int num_device_ranges; + + unsigned int irqs[4]; + int num_irqs; +}; + +/* This struct describes the SBus(s) found on this machine. */ +struct sbus_bus { + void *iommu; /* Opaque IOMMU cookie */ + struct sbus_dev *devices; /* Link to devices on this SBus */ + struct sbus_bus *next; /* next SBus, if more than one SBus */ + int prom_node; /* PROM device tree node for this SBus */ + char prom_name[64]; /* Usually "sbus" or "sbi" */ + int clock_freq; + + struct linux_prom_ranges sbus_ranges[PROMREG_MAX]; + int num_sbus_ranges; + + int devid; + int board; +}; + +extern struct sbus_bus *sbus_root; + +extern __inline__ int +sbus_is_slave(struct sbus_dev *dev) +{ + /* XXX Have to write this for sun4c's */ + return 0; +} + +/* Device probing routines could find these handy */ +#define for_each_sbus(bus) \ + for((bus) = sbus_root; (bus); (bus)=(bus)->next) + +#define for_each_sbusdev(device, bus) \ + for((device) = (bus)->devices; (device); (device)=(device)->next) + +#define for_all_sbusdev(device, bus) \ + for ((bus) = sbus_root; (bus); (bus) = (bus)->next) \ + for ((device) = (bus)->devices; (device); (device) = (device)->next) + +/* Driver DVMA interfaces. */ +#define sbus_can_dma_64bit(sdev) (0) /* actually, sparc_cpu_model==sun4d */ +#define sbus_can_burst64(sdev) (0) /* actually, sparc_cpu_model==sun4d */ +extern void sbus_set_sbus64(struct sbus_dev *, int); + +/* These yield IOMMU mappings in consistent mode. */ +extern void *sbus_alloc_consistent(struct sbus_dev *, long, u32 *dma_addrp); +extern void sbus_free_consistent(struct sbus_dev *, long, void *, u32); +void prom_adjust_ranges(struct linux_prom_ranges *, int, + struct linux_prom_ranges *, int); + +#define SBUS_DMA_BIDIRECTIONAL DMA_BIDIRECTIONAL +#define SBUS_DMA_TODEVICE DMA_TO_DEVICE +#define SBUS_DMA_FROMDEVICE DMA_FROM_DEVICE +#define SBUS_DMA_NONE DMA_NONE + +/* All the rest use streaming mode mappings. */ +extern dma_addr_t sbus_map_single(struct sbus_dev *, void *, size_t, int); +extern void sbus_unmap_single(struct sbus_dev *, dma_addr_t, size_t, int); +extern int sbus_map_sg(struct sbus_dev *, struct scatterlist *, int, int); +extern void sbus_unmap_sg(struct sbus_dev *, struct scatterlist *, int, int); + +/* Finally, allow explicit synchronization of streamable mappings. */ +extern void sbus_dma_sync_single_for_cpu(struct sbus_dev *, dma_addr_t, size_t, int); +#define sbus_dma_sync_single sbus_dma_sync_single_for_cpu +extern void sbus_dma_sync_single_for_device(struct sbus_dev *, dma_addr_t, size_t, int); +extern void sbus_dma_sync_sg_for_cpu(struct sbus_dev *, struct scatterlist *, int, int); +#define sbus_dma_sync_sg sbus_dma_sync_sg_for_cpu +extern void sbus_dma_sync_sg_for_device(struct sbus_dev *, struct scatterlist *, int, int); + +/* Eric Brower (ebrower@usa.net) + * Translate SBus interrupt levels to ino values-- + * this is used when converting sbus "interrupts" OBP + * node values to "intr" node values, and is platform + * dependent. If only we could call OBP with + * "sbus-intr>cpu (sbint -- ino)" from kernel... + * See .../drivers/sbus/sbus.c for details. + */ +BTFIXUPDEF_CALL(unsigned int, sbint_to_irq, struct sbus_dev *sdev, unsigned int) +#define sbint_to_irq(sdev, sbint) BTFIXUP_CALL(sbint_to_irq)(sdev, sbint) + +#endif /* !(_SPARC_SBUS_H) */ diff --git a/include/asm-sparc/scatterlist.h b/include/asm-sparc/scatterlist.h new file mode 100644 index 00000000000..a4fcf9ac964 --- /dev/null +++ b/include/asm-sparc/scatterlist.h @@ -0,0 +1,22 @@ +/* $Id: scatterlist.h,v 1.8 2001/12/17 07:05:15 davem Exp $ */ +#ifndef _SPARC_SCATTERLIST_H +#define _SPARC_SCATTERLIST_H + +#include <linux/types.h> + +struct scatterlist { + struct page *page; + unsigned int offset; + + unsigned int length; + + __u32 dvma_address; /* A place to hang host-specific addresses at. */ + __u32 dvma_length; +}; + +#define sg_dma_address(sg) ((sg)->dvma_address) +#define sg_dma_len(sg) ((sg)->dvma_length) + +#define ISA_DMA_THRESHOLD (~0UL) + +#endif /* !(_SPARC_SCATTERLIST_H) */ diff --git a/include/asm-sparc/sections.h b/include/asm-sparc/sections.h new file mode 100644 index 00000000000..6832841df05 --- /dev/null +++ b/include/asm-sparc/sections.h @@ -0,0 +1,6 @@ +#ifndef _SPARC_SECTIONS_H +#define _SPARC_SECTIONS_H + +#include <asm-generic/sections.h> + +#endif diff --git a/include/asm-sparc/segment.h b/include/asm-sparc/segment.h new file mode 100644 index 00000000000..a1b7ffc9eec --- /dev/null +++ b/include/asm-sparc/segment.h @@ -0,0 +1,6 @@ +#ifndef __SPARC_SEGMENT_H +#define __SPARC_SEGMENT_H + +/* Only here because we have some old header files that expect it.. */ + +#endif diff --git a/include/asm-sparc/semaphore.h b/include/asm-sparc/semaphore.h new file mode 100644 index 00000000000..60ac5fd9eb4 --- /dev/null +++ b/include/asm-sparc/semaphore.h @@ -0,0 +1,196 @@ +#ifndef _SPARC_SEMAPHORE_H +#define _SPARC_SEMAPHORE_H + +/* Dinky, good for nothing, just barely irq safe, Sparc semaphores. */ + +#ifdef __KERNEL__ + +#include <asm/atomic.h> +#include <linux/wait.h> +#include <linux/rwsem.h> + +struct semaphore { + atomic24_t count; + int sleepers; + wait_queue_head_t wait; +}; + +#define __SEMAPHORE_INITIALIZER(name, n) \ +{ \ + .count = ATOMIC24_INIT(n), \ + .sleepers = 0, \ + .wait = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait) \ +} + +#define __MUTEX_INITIALIZER(name) \ + __SEMAPHORE_INITIALIZER(name,1) + +#define __DECLARE_SEMAPHORE_GENERIC(name,count) \ + struct semaphore name = __SEMAPHORE_INITIALIZER(name,count) + +#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name,1) +#define DECLARE_MUTEX_LOCKED(name) __DECLARE_SEMAPHORE_GENERIC(name,0) + +static inline void sema_init (struct semaphore *sem, int val) +{ + atomic24_set(&sem->count, val); + sem->sleepers = 0; + init_waitqueue_head(&sem->wait); +} + +static inline void init_MUTEX (struct semaphore *sem) +{ + sema_init(sem, 1); +} + +static inline void init_MUTEX_LOCKED (struct semaphore *sem) +{ + sema_init(sem, 0); +} + +extern void __down(struct semaphore * sem); +extern int __down_interruptible(struct semaphore * sem); +extern int __down_trylock(struct semaphore * sem); +extern void __up(struct semaphore * sem); + +static inline void down(struct semaphore * sem) +{ + register volatile int *ptr asm("g1"); + register int increment asm("g2"); + + might_sleep(); + + ptr = &(sem->count.counter); + increment = 1; + + __asm__ __volatile__( + "mov %%o7, %%g4\n\t" + "call ___atomic24_sub\n\t" + " add %%o7, 8, %%o7\n\t" + "tst %%g2\n\t" + "bl 2f\n\t" + " nop\n" + "1:\n\t" + ".subsection 2\n" + "2:\n\t" + "save %%sp, -64, %%sp\n\t" + "mov %%g1, %%l1\n\t" + "mov %%g5, %%l5\n\t" + "call %3\n\t" + " mov %%g1, %%o0\n\t" + "mov %%l1, %%g1\n\t" + "ba 1b\n\t" + " restore %%l5, %%g0, %%g5\n\t" + ".previous\n" + : "=&r" (increment) + : "0" (increment), "r" (ptr), "i" (__down) + : "g3", "g4", "g7", "memory", "cc"); +} + +static inline int down_interruptible(struct semaphore * sem) +{ + register volatile int *ptr asm("g1"); + register int increment asm("g2"); + + might_sleep(); + + ptr = &(sem->count.counter); + increment = 1; + + __asm__ __volatile__( + "mov %%o7, %%g4\n\t" + "call ___atomic24_sub\n\t" + " add %%o7, 8, %%o7\n\t" + "tst %%g2\n\t" + "bl 2f\n\t" + " clr %%g2\n" + "1:\n\t" + ".subsection 2\n" + "2:\n\t" + "save %%sp, -64, %%sp\n\t" + "mov %%g1, %%l1\n\t" + "mov %%g5, %%l5\n\t" + "call %3\n\t" + " mov %%g1, %%o0\n\t" + "mov %%l1, %%g1\n\t" + "mov %%l5, %%g5\n\t" + "ba 1b\n\t" + " restore %%o0, %%g0, %%g2\n\t" + ".previous\n" + : "=&r" (increment) + : "0" (increment), "r" (ptr), "i" (__down_interruptible) + : "g3", "g4", "g7", "memory", "cc"); + + return increment; +} + +static inline int down_trylock(struct semaphore * sem) +{ + register volatile int *ptr asm("g1"); + register int increment asm("g2"); + + ptr = &(sem->count.counter); + increment = 1; + + __asm__ __volatile__( + "mov %%o7, %%g4\n\t" + "call ___atomic24_sub\n\t" + " add %%o7, 8, %%o7\n\t" + "tst %%g2\n\t" + "bl 2f\n\t" + " clr %%g2\n" + "1:\n\t" + ".subsection 2\n" + "2:\n\t" + "save %%sp, -64, %%sp\n\t" + "mov %%g1, %%l1\n\t" + "mov %%g5, %%l5\n\t" + "call %3\n\t" + " mov %%g1, %%o0\n\t" + "mov %%l1, %%g1\n\t" + "mov %%l5, %%g5\n\t" + "ba 1b\n\t" + " restore %%o0, %%g0, %%g2\n\t" + ".previous\n" + : "=&r" (increment) + : "0" (increment), "r" (ptr), "i" (__down_trylock) + : "g3", "g4", "g7", "memory", "cc"); + + return increment; +} + +static inline void up(struct semaphore * sem) +{ + register volatile int *ptr asm("g1"); + register int increment asm("g2"); + + ptr = &(sem->count.counter); + increment = 1; + + __asm__ __volatile__( + "mov %%o7, %%g4\n\t" + "call ___atomic24_add\n\t" + " add %%o7, 8, %%o7\n\t" + "tst %%g2\n\t" + "ble 2f\n\t" + " nop\n" + "1:\n\t" + ".subsection 2\n" + "2:\n\t" + "save %%sp, -64, %%sp\n\t" + "mov %%g1, %%l1\n\t" + "mov %%g5, %%l5\n\t" + "call %3\n\t" + " mov %%g1, %%o0\n\t" + "mov %%l1, %%g1\n\t" + "ba 1b\n\t" + " restore %%l5, %%g0, %%g5\n\t" + ".previous\n" + : "=&r" (increment) + : "0" (increment), "r" (ptr), "i" (__up) + : "g3", "g4", "g7", "memory", "cc"); +} + +#endif /* __KERNEL__ */ + +#endif /* !(_SPARC_SEMAPHORE_H) */ diff --git a/include/asm-sparc/sembuf.h b/include/asm-sparc/sembuf.h new file mode 100644 index 00000000000..a79c4bb3c08 --- /dev/null +++ b/include/asm-sparc/sembuf.h @@ -0,0 +1,25 @@ +#ifndef _SPARC_SEMBUF_H +#define _SPARC_SEMBUF_H + +/* + * The semid64_ds structure for sparc architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct semid64_ds { + struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ + unsigned int __pad1; + __kernel_time_t sem_otime; /* last semop time */ + unsigned int __pad2; + __kernel_time_t sem_ctime; /* last change time */ + unsigned long sem_nsems; /* no. of semaphores in array */ + unsigned long __unused1; + unsigned long __unused2; +}; + +#endif /* _SPARC64_SEMBUF_H */ diff --git a/include/asm-sparc/setup.h b/include/asm-sparc/setup.h new file mode 100644 index 00000000000..b3af958a2ad --- /dev/null +++ b/include/asm-sparc/setup.h @@ -0,0 +1,10 @@ +/* + * Just a place holder. + */ + +#ifndef _SPARC_SETUP_H +#define _SPARC_SETUP_H + +#define COMMAND_LINE_SIZE 256 + +#endif /* _SPARC_SETUP_H */ diff --git a/include/asm-sparc/sfp-machine.h b/include/asm-sparc/sfp-machine.h new file mode 100644 index 00000000000..b4ca2d94bf0 --- /dev/null +++ b/include/asm-sparc/sfp-machine.h @@ -0,0 +1,207 @@ +/* Machine-dependent software floating-point definitions. + Sparc userland (_Q_*) version. + Copyright (C) 1997,1998,1999 Free Software Foundation, Inc. + This file is part of the GNU C Library. + Contributed by Richard Henderson (rth@cygnus.com), + Jakub Jelinek (jj@ultra.linux.cz), + David S. Miller (davem@redhat.com) and + Peter Maydell (pmaydell@chiark.greenend.org.uk). + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Library General Public License as + published by the Free Software Foundation; either version 2 of the + License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Library General Public License for more details. + + You should have received a copy of the GNU Library General Public + License along with the GNU C Library; see the file COPYING.LIB. If + not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef _SFP_MACHINE_H +#define _SFP_MACHINE_H + +#include <linux/config.h> + +#define _FP_W_TYPE_SIZE 32 +#define _FP_W_TYPE unsigned long +#define _FP_WS_TYPE signed long +#define _FP_I_TYPE long + +#define _FP_MUL_MEAT_S(R,X,Y) \ + _FP_MUL_MEAT_1_wide(_FP_WFRACBITS_S,R,X,Y,umul_ppmm) +#define _FP_MUL_MEAT_D(R,X,Y) \ + _FP_MUL_MEAT_2_wide(_FP_WFRACBITS_D,R,X,Y,umul_ppmm) +#define _FP_MUL_MEAT_Q(R,X,Y) \ + _FP_MUL_MEAT_4_wide(_FP_WFRACBITS_Q,R,X,Y,umul_ppmm) + +#define _FP_DIV_MEAT_S(R,X,Y) _FP_DIV_MEAT_1_udiv(S,R,X,Y) +#define _FP_DIV_MEAT_D(R,X,Y) _FP_DIV_MEAT_2_udiv(D,R,X,Y) +#define _FP_DIV_MEAT_Q(R,X,Y) _FP_DIV_MEAT_4_udiv(Q,R,X,Y) + +#define _FP_NANFRAC_S ((_FP_QNANBIT_S << 1) - 1) +#define _FP_NANFRAC_D ((_FP_QNANBIT_D << 1) - 1), -1 +#define _FP_NANFRAC_Q ((_FP_QNANBIT_Q << 1) - 1), -1, -1, -1 +#define _FP_NANSIGN_S 0 +#define _FP_NANSIGN_D 0 +#define _FP_NANSIGN_Q 0 + +#define _FP_KEEPNANFRACP 1 + +/* If one NaN is signaling and the other is not, + * we choose that one, otherwise we choose X. + */ +/* For _Qp_* and _Q_*, this should prefer X, for + * CPU instruction emulation this should prefer Y. + * (see SPAMv9 B.2.2 section). + */ +#define _FP_CHOOSENAN(fs, wc, R, X, Y, OP) \ + do { \ + if ((_FP_FRAC_HIGH_RAW_##fs(Y) & _FP_QNANBIT_##fs) \ + && !(_FP_FRAC_HIGH_RAW_##fs(X) & _FP_QNANBIT_##fs)) \ + { \ + R##_s = X##_s; \ + _FP_FRAC_COPY_##wc(R,X); \ + } \ + else \ + { \ + R##_s = Y##_s; \ + _FP_FRAC_COPY_##wc(R,Y); \ + } \ + R##_c = FP_CLS_NAN; \ + } while (0) + +/* Some assembly to speed things up. */ +#define __FP_FRAC_ADD_3(r2,r1,r0,x2,x1,x0,y2,y1,y0) \ + __asm__ ("addcc %r7,%8,%2\n\t" \ + "addxcc %r5,%6,%1\n\t" \ + "addx %r3,%4,%0\n" \ + : "=r" ((USItype)(r2)), \ + "=&r" ((USItype)(r1)), \ + "=&r" ((USItype)(r0)) \ + : "%rJ" ((USItype)(x2)), \ + "rI" ((USItype)(y2)), \ + "%rJ" ((USItype)(x1)), \ + "rI" ((USItype)(y1)), \ + "%rJ" ((USItype)(x0)), \ + "rI" ((USItype)(y0)) \ + : "cc") + +#define __FP_FRAC_SUB_3(r2,r1,r0,x2,x1,x0,y2,y1,y0) \ + __asm__ ("subcc %r7,%8,%2\n\t" \ + "subxcc %r5,%6,%1\n\t" \ + "subx %r3,%4,%0\n" \ + : "=r" ((USItype)(r2)), \ + "=&r" ((USItype)(r1)), \ + "=&r" ((USItype)(r0)) \ + : "%rJ" ((USItype)(x2)), \ + "rI" ((USItype)(y2)), \ + "%rJ" ((USItype)(x1)), \ + "rI" ((USItype)(y1)), \ + "%rJ" ((USItype)(x0)), \ + "rI" ((USItype)(y0)) \ + : "cc") + +#define __FP_FRAC_ADD_4(r3,r2,r1,r0,x3,x2,x1,x0,y3,y2,y1,y0) \ + do { \ + /* We need to fool gcc, as we need to pass more than 10 \ + input/outputs. */ \ + register USItype _t1 __asm__ ("g1"), _t2 __asm__ ("g2"); \ + __asm__ __volatile__ ( \ + "addcc %r8,%9,%1\n\t" \ + "addxcc %r6,%7,%0\n\t" \ + "addxcc %r4,%5,%%g2\n\t" \ + "addx %r2,%3,%%g1\n\t" \ + : "=&r" ((USItype)(r1)), \ + "=&r" ((USItype)(r0)) \ + : "%rJ" ((USItype)(x3)), \ + "rI" ((USItype)(y3)), \ + "%rJ" ((USItype)(x2)), \ + "rI" ((USItype)(y2)), \ + "%rJ" ((USItype)(x1)), \ + "rI" ((USItype)(y1)), \ + "%rJ" ((USItype)(x0)), \ + "rI" ((USItype)(y0)) \ + : "cc", "g1", "g2"); \ + __asm__ __volatile__ ("" : "=r" (_t1), "=r" (_t2)); \ + r3 = _t1; r2 = _t2; \ + } while (0) + +#define __FP_FRAC_SUB_4(r3,r2,r1,r0,x3,x2,x1,x0,y3,y2,y1,y0) \ + do { \ + /* We need to fool gcc, as we need to pass more than 10 \ + input/outputs. */ \ + register USItype _t1 __asm__ ("g1"), _t2 __asm__ ("g2"); \ + __asm__ __volatile__ ( \ + "subcc %r8,%9,%1\n\t" \ + "subxcc %r6,%7,%0\n\t" \ + "subxcc %r4,%5,%%g2\n\t" \ + "subx %r2,%3,%%g1\n\t" \ + : "=&r" ((USItype)(r1)), \ + "=&r" ((USItype)(r0)) \ + : "%rJ" ((USItype)(x3)), \ + "rI" ((USItype)(y3)), \ + "%rJ" ((USItype)(x2)), \ + "rI" ((USItype)(y2)), \ + "%rJ" ((USItype)(x1)), \ + "rI" ((USItype)(y1)), \ + "%rJ" ((USItype)(x0)), \ + "rI" ((USItype)(y0)) \ + : "cc", "g1", "g2"); \ + __asm__ __volatile__ ("" : "=r" (_t1), "=r" (_t2)); \ + r3 = _t1; r2 = _t2; \ + } while (0) + +#define __FP_FRAC_DEC_3(x2,x1,x0,y2,y1,y0) __FP_FRAC_SUB_3(x2,x1,x0,x2,x1,x0,y2,y1,y0) + +#define __FP_FRAC_DEC_4(x3,x2,x1,x0,y3,y2,y1,y0) __FP_FRAC_SUB_4(x3,x2,x1,x0,x3,x2,x1,x0,y3,y2,y1,y0) + +#define __FP_FRAC_ADDI_4(x3,x2,x1,x0,i) \ + __asm__ ("addcc %3,%4,%3\n\t" \ + "addxcc %2,%%g0,%2\n\t" \ + "addxcc %1,%%g0,%1\n\t" \ + "addx %0,%%g0,%0\n\t" \ + : "=&r" ((USItype)(x3)), \ + "=&r" ((USItype)(x2)), \ + "=&r" ((USItype)(x1)), \ + "=&r" ((USItype)(x0)) \ + : "rI" ((USItype)(i)), \ + "0" ((USItype)(x3)), \ + "1" ((USItype)(x2)), \ + "2" ((USItype)(x1)), \ + "3" ((USItype)(x0)) \ + : "cc") + +#ifndef CONFIG_SMP +extern struct task_struct *last_task_used_math; +#endif + +/* Obtain the current rounding mode. */ +#ifndef FP_ROUNDMODE +#ifdef CONFIG_SMP +#define FP_ROUNDMODE ((current->thread.fsr >> 30) & 0x3) +#else +#define FP_ROUNDMODE ((last_task_used_math->thread.fsr >> 30) & 0x3) +#endif +#endif + +/* Exception flags. */ +#define FP_EX_INVALID (1 << 4) +#define FP_EX_OVERFLOW (1 << 3) +#define FP_EX_UNDERFLOW (1 << 2) +#define FP_EX_DIVZERO (1 << 1) +#define FP_EX_INEXACT (1 << 0) + +#define FP_HANDLE_EXCEPTIONS return _fex + +#ifdef CONFIG_SMP +#define FP_INHIBIT_RESULTS ((current->thread.fsr >> 23) & _fex) +#else +#define FP_INHIBIT_RESULTS ((last_task_used_math->thread.fsr >> 23) & _fex) +#endif + +#endif diff --git a/include/asm-sparc/shmbuf.h b/include/asm-sparc/shmbuf.h new file mode 100644 index 00000000000..1ff9da8bec7 --- /dev/null +++ b/include/asm-sparc/shmbuf.h @@ -0,0 +1,42 @@ +#ifndef _SPARC_SHMBUF_H +#define _SPARC_SHMBUF_H + +/* + * The shmid64_ds structure for sparc architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct shmid64_ds { + struct ipc64_perm shm_perm; /* operation perms */ + unsigned int __pad1; + __kernel_time_t shm_atime; /* last attach time */ + unsigned int __pad2; + __kernel_time_t shm_dtime; /* last detach time */ + unsigned int __pad3; + __kernel_time_t shm_ctime; /* last change time */ + size_t shm_segsz; /* size of segment (bytes) */ + __kernel_pid_t shm_cpid; /* pid of creator */ + __kernel_pid_t shm_lpid; /* pid of last operator */ + unsigned long shm_nattch; /* no. of current attaches */ + unsigned long __unused1; + unsigned long __unused2; +}; + +struct shminfo64 { + unsigned long shmmax; + unsigned long shmmin; + unsigned long shmmni; + unsigned long shmseg; + unsigned long shmall; + unsigned long __unused1; + unsigned long __unused2; + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* _SPARC_SHMBUF_H */ diff --git a/include/asm-sparc/shmparam.h b/include/asm-sparc/shmparam.h new file mode 100644 index 00000000000..bb93a6f74a3 --- /dev/null +++ b/include/asm-sparc/shmparam.h @@ -0,0 +1,12 @@ +/* $Id: shmparam.h,v 1.6 1999/12/09 10:32:41 davem Exp $ */ +#ifndef _ASMSPARC_SHMPARAM_H +#define _ASMSPARC_SHMPARAM_H + +#define __ARCH_FORCE_SHMLBA 1 + +extern int vac_cache_size; +#define SHMLBA (vac_cache_size ? vac_cache_size : \ + (sparc_cpu_model == sun4c ? (64 * 1024) : \ + (sparc_cpu_model == sun4 ? (128 * 1024) : PAGE_SIZE))) + +#endif /* _ASMSPARC_SHMPARAM_H */ diff --git a/include/asm-sparc/sigcontext.h b/include/asm-sparc/sigcontext.h new file mode 100644 index 00000000000..7fa2c7d01ab --- /dev/null +++ b/include/asm-sparc/sigcontext.h @@ -0,0 +1,63 @@ +/* $Id: sigcontext.h,v 1.14 1999/09/06 08:22:05 jj Exp $ */ +#ifndef __SPARC_SIGCONTEXT_H +#define __SPARC_SIGCONTEXT_H + +#ifdef __KERNEL__ +#include <asm/ptrace.h> + +#ifndef __ASSEMBLY__ + +#define __SUNOS_MAXWIN 31 + +/* This is what SunOS does, so shall I. */ +struct sigcontext { + int sigc_onstack; /* state to restore */ + int sigc_mask; /* sigmask to restore */ + int sigc_sp; /* stack pointer */ + int sigc_pc; /* program counter */ + int sigc_npc; /* next program counter */ + int sigc_psr; /* for condition codes etc */ + int sigc_g1; /* User uses these two registers */ + int sigc_o0; /* within the trampoline code. */ + + /* Now comes information regarding the users window set + * at the time of the signal. + */ + int sigc_oswins; /* outstanding windows */ + + /* stack ptrs for each regwin buf */ + char *sigc_spbuf[__SUNOS_MAXWIN]; + + /* Windows to restore after signal */ + struct { + unsigned long locals[8]; + unsigned long ins[8]; + } sigc_wbuf[__SUNOS_MAXWIN]; +}; + +typedef struct { + struct { + unsigned long psr; + unsigned long pc; + unsigned long npc; + unsigned long y; + unsigned long u_regs[16]; /* globals and ins */ + } si_regs; + int si_mask; +} __siginfo_t; + +typedef struct { + unsigned long si_float_regs [32]; + unsigned long si_fsr; + unsigned long si_fpqdepth; + struct { + unsigned long *insn_addr; + unsigned long insn; + } si_fpqueue [16]; +} __siginfo_fpu_t; + +#endif /* !(__ASSEMBLY__) */ + +#endif /* (__KERNEL__) */ + +#endif /* !(__SPARC_SIGCONTEXT_H) */ diff --git a/include/asm-sparc/siginfo.h b/include/asm-sparc/siginfo.h new file mode 100644 index 00000000000..2c3ea8b2244 --- /dev/null +++ b/include/asm-sparc/siginfo.h @@ -0,0 +1,21 @@ +/* $Id: siginfo.h,v 1.9 2002/02/08 03:57:18 davem Exp $ + * siginfo.c: + */ + +#ifndef _SPARC_SIGINFO_H +#define _SPARC_SIGINFO_H + +#define __ARCH_SI_UID_T unsigned int +#define __ARCH_SI_TRAPNO + +#include <asm-generic/siginfo.h> + +#define SI_NOINFO 32767 /* no information in siginfo_t */ + +/* + * SIGEMT si_codes + */ +#define EMT_TAGOVF (__SI_FAULT|1) /* tag overflow */ +#define NSIGEMT 1 + +#endif /* !(_SPARC_SIGINFO_H) */ diff --git a/include/asm-sparc/signal.h b/include/asm-sparc/signal.h new file mode 100644 index 00000000000..d8211cb6e6b --- /dev/null +++ b/include/asm-sparc/signal.h @@ -0,0 +1,234 @@ +/* $Id: signal.h,v 1.35 1999/09/06 08:22:04 jj Exp $ */ +#ifndef _ASMSPARC_SIGNAL_H +#define _ASMSPARC_SIGNAL_H + +#include <asm/sigcontext.h> +#include <linux/compiler.h> + +#ifdef __KERNEL__ +#ifndef __ASSEMBLY__ +#include <linux/personality.h> +#include <linux/types.h> +#endif +#endif + +/* On the Sparc the signal handlers get passed a 'sub-signal' code + * for certain signal types, which we document here. + */ +#define SIGHUP 1 +#define SIGINT 2 +#define SIGQUIT 3 +#define SIGILL 4 +#define SUBSIG_STACK 0 +#define SUBSIG_ILLINST 2 +#define SUBSIG_PRIVINST 3 +#define SUBSIG_BADTRAP(t) (0x80 + (t)) + +#define SIGTRAP 5 +#define SIGABRT 6 +#define SIGIOT 6 + +#define SIGEMT 7 +#define SUBSIG_TAG 10 + +#define SIGFPE 8 +#define SUBSIG_FPDISABLED 0x400 +#define SUBSIG_FPERROR 0x404 +#define SUBSIG_FPINTOVFL 0x001 +#define SUBSIG_FPSTSIG 0x002 +#define SUBSIG_IDIVZERO 0x014 +#define SUBSIG_FPINEXACT 0x0c4 +#define SUBSIG_FPDIVZERO 0x0c8 +#define SUBSIG_FPUNFLOW 0x0cc +#define SUBSIG_FPOPERROR 0x0d0 +#define SUBSIG_FPOVFLOW 0x0d4 + +#define SIGKILL 9 +#define SIGBUS 10 +#define SUBSIG_BUSTIMEOUT 1 +#define SUBSIG_ALIGNMENT 2 +#define SUBSIG_MISCERROR 5 + +#define SIGSEGV 11 +#define SUBSIG_NOMAPPING 3 +#define SUBSIG_PROTECTION 4 +#define SUBSIG_SEGERROR 5 + +#define SIGSYS 12 + +#define SIGPIPE 13 +#define SIGALRM 14 +#define SIGTERM 15 +#define SIGURG 16 + +/* SunOS values which deviate from the Linux/i386 ones */ +#define SIGSTOP 17 +#define SIGTSTP 18 +#define SIGCONT 19 +#define SIGCHLD 20 +#define SIGTTIN 21 +#define SIGTTOU 22 +#define SIGIO 23 +#define SIGPOLL SIGIO /* SysV name for SIGIO */ +#define SIGXCPU 24 +#define SIGXFSZ 25 +#define SIGVTALRM 26 +#define SIGPROF 27 +#define SIGWINCH 28 +#define SIGLOST 29 +#define SIGPWR SIGLOST +#define SIGUSR1 30 +#define SIGUSR2 31 + +/* Most things should be clean enough to redefine this at will, if care + * is taken to make libc match. + */ + +#define __OLD_NSIG 32 +#define __NEW_NSIG 64 +#define _NSIG_BPW 32 +#define _NSIG_WORDS (__NEW_NSIG / _NSIG_BPW) + +#define SIGRTMIN 32 +#define SIGRTMAX __NEW_NSIG + +#if defined(__KERNEL__) || defined(__WANT_POSIX1B_SIGNALS__) +#define _NSIG __NEW_NSIG +#define __new_sigset_t sigset_t +#define __new_sigaction sigaction +#define __old_sigset_t old_sigset_t +#define __old_sigaction old_sigaction +#else +#define _NSIG __OLD_NSIG +#define __old_sigset_t sigset_t +#define __old_sigaction sigaction +#endif + +#ifndef __ASSEMBLY__ + +typedef unsigned long __old_sigset_t; + +typedef struct { + unsigned long sig[_NSIG_WORDS]; +} __new_sigset_t; + + +#ifdef __KERNEL__ +/* A SunOS sigstack */ +struct sigstack { + char *the_stack; + int cur_status; +}; +#endif + +/* Sigvec flags */ +#define _SV_SSTACK 1u /* This signal handler should use sig-stack */ +#define _SV_INTR 2u /* Sig return should not restart system call */ +#define _SV_RESET 4u /* Set handler to SIG_DFL upon taken signal */ +#define _SV_IGNCHILD 8u /* Do not send SIGCHLD */ + +/* + * sa_flags values: SA_STACK is not currently supported, but will allow the + * usage of signal stacks by using the (now obsolete) sa_restorer field in + * the sigaction structure as a stack pointer. This is now possible due to + * the changes in signal handling. LBT 010493. + * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the + * SA_RESTART flag to get restarting signals (which were the default long ago) + * SA_SHIRQ flag is for shared interrupt support on PCI and EISA. + */ +#define SA_NOCLDSTOP _SV_IGNCHILD +#define SA_STACK _SV_SSTACK +#define SA_ONSTACK _SV_SSTACK +#define SA_RESTART _SV_INTR +#define SA_ONESHOT _SV_RESET +#define SA_INTERRUPT 0x10u +#define SA_NOMASK 0x20u +#define SA_SHIRQ 0x40u +#define SA_NOCLDWAIT 0x100u +#define SA_SIGINFO 0x200u + +#define SIG_BLOCK 0x01 /* for blocking signals */ +#define SIG_UNBLOCK 0x02 /* for unblocking signals */ +#define SIG_SETMASK 0x04 /* for setting the signal mask */ + +/* + * sigaltstack controls + */ +#define SS_ONSTACK 1 +#define SS_DISABLE 2 + +#define MINSIGSTKSZ 4096 +#define SIGSTKSZ 16384 + +#ifdef __KERNEL__ +/* + * These values of sa_flags are used only by the kernel as part of the + * irq handling routines. + * + * SA_INTERRUPT is also used by the irq handling routines. + * + * DJHR + * SA_STATIC_ALLOC is used for the SPARC system to indicate that this + * interrupt handler's irq structure should be statically allocated + * by the request_irq routine. + * The alternative is that arch/sparc/kernel/irq.c has carnal knowledge + * of interrupt usage and that sucks. Also without a flag like this + * it may be possible for the free_irq routine to attempt to free + * statically allocated data.. which is NOT GOOD. + * + */ +#define SA_PROBE SA_ONESHOT +#define SA_SAMPLE_RANDOM SA_RESTART +#define SA_STATIC_ALLOC 0x80 +#endif + +/* Type of a signal handler. */ +#ifdef __KERNEL__ +typedef void (*__sighandler_t)(int, int, struct sigcontext *, char *); +#else +typedef void (*__sighandler_t)(int); +#endif + +#define SIG_DFL ((__sighandler_t)0) /* default signal handling */ +#define SIG_IGN ((__sighandler_t)1) /* ignore signal */ +#define SIG_ERR ((__sighandler_t)-1) /* error return from signal */ + +#ifdef __KERNEL__ +struct __new_sigaction { + __sighandler_t sa_handler; + unsigned long sa_flags; + void (*sa_restorer)(void); /* Not used by Linux/SPARC */ + __new_sigset_t sa_mask; +}; + +struct k_sigaction { + struct __new_sigaction sa; + void __user *ka_restorer; +}; + +struct __old_sigaction { + __sighandler_t sa_handler; + __old_sigset_t sa_mask; + unsigned long sa_flags; + void (*sa_restorer) (void); /* not used by Linux/SPARC */ +}; + +typedef struct sigaltstack { + void __user *ss_sp; + int ss_flags; + size_t ss_size; +} stack_t; + +struct sparc_deliver_cookie { + int restart_syscall; + unsigned long orig_i0; +}; + +struct pt_regs; +extern void ptrace_signal_deliver(struct pt_regs *regs, void *cookie); + +#endif /* !(__KERNEL__) */ + +#endif /* !(__ASSEMBLY__) */ + +#endif /* !(_ASMSPARC_SIGNAL_H) */ diff --git a/include/asm-sparc/smp.h b/include/asm-sparc/smp.h new file mode 100644 index 00000000000..f986c0d0922 --- /dev/null +++ b/include/asm-sparc/smp.h @@ -0,0 +1,176 @@ +/* smp.h: Sparc specific SMP stuff. + * + * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef _SPARC_SMP_H +#define _SPARC_SMP_H + +#include <linux/config.h> +#include <linux/threads.h> +#include <asm/head.h> +#include <asm/btfixup.h> + +#ifndef __ASSEMBLY__ + +#include <linux/cpumask.h> + +#endif /* __ASSEMBLY__ */ + +#ifdef CONFIG_SMP + +#ifndef __ASSEMBLY__ + +#include <asm/ptrace.h> +#include <asm/asi.h> +#include <asm/atomic.h> + +/* + * Private routines/data + */ + +extern unsigned char boot_cpu_id; +extern cpumask_t phys_cpu_present_map; +#define cpu_possible_map phys_cpu_present_map + +typedef void (*smpfunc_t)(unsigned long, unsigned long, unsigned long, + unsigned long, unsigned long); + +/* + * General functions that each host system must provide. + */ + +void sun4m_init_smp(void); +void sun4d_init_smp(void); + +void smp_callin(void); +void smp_boot_cpus(void); +void smp_store_cpu_info(int); + +struct seq_file; +void smp_bogo(struct seq_file *); +void smp_info(struct seq_file *); + +BTFIXUPDEF_CALL(void, smp_cross_call, smpfunc_t, unsigned long, unsigned long, unsigned long, unsigned long, unsigned long) +BTFIXUPDEF_CALL(void, smp_message_pass, int, int, unsigned long, int) +BTFIXUPDEF_CALL(int, __hard_smp_processor_id, void) +BTFIXUPDEF_BLACKBOX(hard_smp_processor_id) +BTFIXUPDEF_BLACKBOX(load_current) + +#define smp_cross_call(func,arg1,arg2,arg3,arg4,arg5) BTFIXUP_CALL(smp_cross_call)(func,arg1,arg2,arg3,arg4,arg5) +#define smp_message_pass(target,msg,data,wait) BTFIXUP_CALL(smp_message_pass)(target,msg,data,wait) + +extern __inline__ void xc0(smpfunc_t func) { smp_cross_call(func, 0, 0, 0, 0, 0); } +extern __inline__ void xc1(smpfunc_t func, unsigned long arg1) +{ smp_cross_call(func, arg1, 0, 0, 0, 0); } +extern __inline__ void xc2(smpfunc_t func, unsigned long arg1, unsigned long arg2) +{ smp_cross_call(func, arg1, arg2, 0, 0, 0); } +extern __inline__ void xc3(smpfunc_t func, unsigned long arg1, unsigned long arg2, + unsigned long arg3) +{ smp_cross_call(func, arg1, arg2, arg3, 0, 0); } +extern __inline__ void xc4(smpfunc_t func, unsigned long arg1, unsigned long arg2, + unsigned long arg3, unsigned long arg4) +{ smp_cross_call(func, arg1, arg2, arg3, arg4, 0); } +extern __inline__ void xc5(smpfunc_t func, unsigned long arg1, unsigned long arg2, + unsigned long arg3, unsigned long arg4, unsigned long arg5) +{ smp_cross_call(func, arg1, arg2, arg3, arg4, arg5); } + +extern __inline__ int smp_call_function(void (*func)(void *info), void *info, int nonatomic, int wait) +{ + xc1((smpfunc_t)func, (unsigned long)info); + return 0; +} + +extern __volatile__ int __cpu_number_map[NR_CPUS]; +extern __volatile__ int __cpu_logical_map[NR_CPUS]; + +extern __inline__ int cpu_logical_map(int cpu) +{ + return __cpu_logical_map[cpu]; +} +extern __inline__ int cpu_number_map(int cpu) +{ + return __cpu_number_map[cpu]; +} + +extern __inline__ int hard_smp4m_processor_id(void) +{ + int cpuid; + + __asm__ __volatile__("rd %%tbr, %0\n\t" + "srl %0, 12, %0\n\t" + "and %0, 3, %0\n\t" : + "=&r" (cpuid)); + return cpuid; +} + +extern __inline__ int hard_smp4d_processor_id(void) +{ + int cpuid; + + __asm__ __volatile__("lda [%%g0] %1, %0\n\t" : + "=&r" (cpuid) : "i" (ASI_M_VIKING_TMP1)); + return cpuid; +} + +#ifndef MODULE +extern __inline__ int hard_smp_processor_id(void) +{ + int cpuid; + + /* Black box - sun4m + __asm__ __volatile__("rd %%tbr, %0\n\t" + "srl %0, 12, %0\n\t" + "and %0, 3, %0\n\t" : + "=&r" (cpuid)); + - sun4d + __asm__ __volatile__("lda [%g0] ASI_M_VIKING_TMP1, %0\n\t" + "nop; nop" : + "=&r" (cpuid)); + See btfixup.h and btfixupprep.c to understand how a blackbox works. + */ + __asm__ __volatile__("sethi %%hi(___b_hard_smp_processor_id), %0\n\t" + "sethi %%hi(boot_cpu_id), %0\n\t" + "ldub [%0 + %%lo(boot_cpu_id)], %0\n\t" : + "=&r" (cpuid)); + return cpuid; +} +#else +extern __inline__ int hard_smp_processor_id(void) +{ + int cpuid; + + __asm__ __volatile__("mov %%o7, %%g1\n\t" + "call ___f___hard_smp_processor_id\n\t" + " nop\n\t" + "mov %%g2, %0\n\t" : "=r"(cpuid) : : "g1", "g2"); + return cpuid; +} +#endif + +#define smp_processor_id() (current_thread_info()->cpu) + +#define prof_multiplier(__cpu) cpu_data(__cpu).multiplier +#define prof_counter(__cpu) cpu_data(__cpu).counter + +#endif /* !(__ASSEMBLY__) */ + +/* Sparc specific messages. */ +#define MSG_CROSS_CALL 0x0005 /* run func on cpus */ + +/* Empirical PROM processor mailbox constants. If the per-cpu mailbox + * contains something other than one of these then the ipi is from + * Linux's active_kernel_processor. This facility exists so that + * the boot monitor can capture all the other cpus when one catches + * a watchdog reset or the user enters the monitor using L1-A keys. + */ +#define MBOX_STOPCPU 0xFB +#define MBOX_IDLECPU 0xFC +#define MBOX_IDLECPU2 0xFD +#define MBOX_STOPCPU2 0xFE + +#endif /* SMP */ + +#define NO_PROC_ID 0xFF + +#endif /* !(_SPARC_SMP_H) */ diff --git a/include/asm-sparc/smpprim.h b/include/asm-sparc/smpprim.h new file mode 100644 index 00000000000..9b9c28ed748 --- /dev/null +++ b/include/asm-sparc/smpprim.h @@ -0,0 +1,54 @@ +/* $Id: smpprim.h,v 1.5 1996/08/29 09:48:49 davem Exp $ + * smpprim.h: SMP locking primitives on the Sparc + * + * God knows we won't be actually using this code for some time + * but I thought I'd write it since I knew how. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef __SPARC_SMPPRIM_H +#define __SPARC_SMPPRIM_H + +/* Test and set the unsigned byte at ADDR to 1. Returns the previous + * value. On the Sparc we use the ldstub instruction since it is + * atomic. + */ + +extern __inline__ __volatile__ char test_and_set(void *addr) +{ + char state = 0; + + __asm__ __volatile__("ldstub [%0], %1 ! test_and_set\n\t" + "=r" (addr), "=r" (state) : + "0" (addr), "1" (state) : "memory"); + + return state; +} + +/* Initialize a spin-lock. */ +extern __inline__ __volatile__ smp_initlock(void *spinlock) +{ + /* Unset the lock. */ + *((unsigned char *) spinlock) = 0; + + return; +} + +/* This routine spins until it acquires the lock at ADDR. */ +extern __inline__ __volatile__ smp_lock(void *addr) +{ + while(test_and_set(addr) == 0xff) + ; + + /* We now have the lock */ + return; +} + +/* This routine releases the lock at ADDR. */ +extern __inline__ __volatile__ smp_unlock(void *addr) +{ + *((unsigned char *) addr) = 0; +} + +#endif /* !(__SPARC_SMPPRIM_H) */ diff --git a/include/asm-sparc/socket.h b/include/asm-sparc/socket.h new file mode 100644 index 00000000000..c1154e3ecfd --- /dev/null +++ b/include/asm-sparc/socket.h @@ -0,0 +1,55 @@ +/* $Id: socket.h,v 1.17 2001/06/13 16:25:03 davem Exp $ */ +#ifndef _ASM_SOCKET_H +#define _ASM_SOCKET_H + +#include <asm/sockios.h> + +/* For setsockopt(2) */ +#define SOL_SOCKET 0xffff + +#define SO_DEBUG 0x0001 +#define SO_PASSCRED 0x0002 +#define SO_REUSEADDR 0x0004 +#define SO_KEEPALIVE 0x0008 +#define SO_DONTROUTE 0x0010 +#define SO_BROADCAST 0x0020 +#define SO_PEERCRED 0x0040 +#define SO_LINGER 0x0080 +#define SO_OOBINLINE 0x0100 +/* To add :#define SO_REUSEPORT 0x0200 */ +#define SO_BSDCOMPAT 0x0400 +#define SO_RCVLOWAT 0x0800 +#define SO_SNDLOWAT 0x1000 +#define SO_RCVTIMEO 0x2000 +#define SO_SNDTIMEO 0x4000 +#define SO_ACCEPTCONN 0x8000 + +/* wha!??? */ +#define SO_DONTLINGER (~SO_LINGER) /* Older SunOS compat. hack */ + +#define SO_SNDBUF 0x1001 +#define SO_RCVBUF 0x1002 +#define SO_ERROR 0x1007 +#define SO_TYPE 0x1008 + +/* Linux specific, keep the same. */ +#define SO_NO_CHECK 0x000b +#define SO_PRIORITY 0x000c + +#define SO_BINDTODEVICE 0x000d + +#define SO_ATTACH_FILTER 0x001a +#define SO_DETACH_FILTER 0x001b + +#define SO_PEERNAME 0x001c +#define SO_TIMESTAMP 0x001d +#define SCM_TIMESTAMP SO_TIMESTAMP + +#define SO_PEERSEC 0x100e + +/* Security levels - as per NRL IPv6 - don't actually do anything */ +#define SO_SECURITY_AUTHENTICATION 0x5001 +#define SO_SECURITY_ENCRYPTION_TRANSPORT 0x5002 +#define SO_SECURITY_ENCRYPTION_NETWORK 0x5004 + +#endif /* _ASM_SOCKET_H */ diff --git a/include/asm-sparc/sockios.h b/include/asm-sparc/sockios.h new file mode 100644 index 00000000000..0c01b597b06 --- /dev/null +++ b/include/asm-sparc/sockios.h @@ -0,0 +1,13 @@ +#ifndef _ASM_SPARC_SOCKIOS_H +#define _ASM_SPARC_SOCKIOS_H + +/* Socket-level I/O control calls. */ +#define FIOSETOWN 0x8901 +#define SIOCSPGRP 0x8902 +#define FIOGETOWN 0x8903 +#define SIOCGPGRP 0x8904 +#define SIOCATMARK 0x8905 +#define SIOCGSTAMP 0x8906 /* Get stamp */ + +#endif /* !(_ASM_SPARC_SOCKIOS_H) */ + diff --git a/include/asm-sparc/solerrno.h b/include/asm-sparc/solerrno.h new file mode 100644 index 00000000000..8abce7e4639 --- /dev/null +++ b/include/asm-sparc/solerrno.h @@ -0,0 +1,132 @@ +/* $Id: solerrno.h,v 1.5 1996/04/25 06:13:32 davem Exp $ + * solerrno.h: Solaris error return codes for compatibility. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef _SPARC_SOLERRNO_H +#define _SPARC_SOLERRNO_H + +#define SOL_EPERM 1 /* Required superuser access perms */ +#define SOL_ENOENT 2 /* File or directory does not exist */ +#define SOL_ESRCH 3 /* Process did not exist */ +#define SOL_EINTR 4 /* System call was interrupted */ +#define SOL_EIO 5 /* An i/o error occurred */ +#define SOL_ENXIO 6 /* Device or Address does not exist */ +#define SOL_E2BIG 7 /* Too many arguments were given */ +#define SOL_ENOEXEC 8 /* Header of executable was munged */ +#define SOL_EBADF 9 /* Bogus file number */ +#define SOL_ECHILD 10 /* No children of process exist */ +#define SOL_EAGAIN 11 /* beep beep, "try again later" */ +#define SOL_ENOMEM 12 /* No memory available */ +#define SOL_EACCES 13 /* Access not allowed */ +#define SOL_EFAULT 14 /* Address passed was invalid */ +#define SOL_ENOTBLK 15 /* blkdev op on non-block device */ +#define SOL_EBUSY 16 /* Mounted device was busy */ +#define SOL_EEXIST 17 /* File specified already exists */ +#define SOL_EXDEV 18 /* Link request across diff devices */ +#define SOL_ENODEV 19 /* Device does not exist on system */ +#define SOL_ENOTDIR 20 /* Dir operation on non-directory */ +#define SOL_EISDIR 21 /* File was of directory type */ +#define SOL_EINVAL 22 /* Argument passed was invalid */ +#define SOL_ENFILE 23 /* No more room in file table */ +#define SOL_EMFILE 24 /* Proc has too many files open */ +#define SOL_ENOTTY 25 /* Ioctl was invalid for req device */ +#define SOL_ETXTBSY 26 /* Text file in busy state */ +#define SOL_EFBIG 27 /* Too big of a file for operation */ +#define SOL_ENOSPC 28 /* Disk is full */ +#define SOL_ESPIPE 29 /* Seek attempted on non-seeking dev*/ +#define SOL_EROFS 30 /* Write attempted on read-only fs */ +#define SOL_EMLINK 31 /* Too many links in file search */ +#define SOL_EPIPE 32 /* Call a plumber */ +#define SOL_EDOM 33 /* Argument was out of fct domain */ +#define SOL_ERANGE 34 /* Could not represent math result */ +#define SOL_ENOMSG 35 /* Message of req type doesn't exist */ +#define SOL_EIDRM 36 /* Identifier has been removed */ +#define SOL_ECHRNG 37 /* Req channel number out of range */ +#define SOL_EL2NSYNC 38 /* Could not sync at run level 2 */ +#define SOL_EL3HLT 39 /* Halted at run level 3 */ +#define SOL_EL3RST 40 /* Reset at run level 3 */ +#define SOL_ELNRNG 41 /* Out of range link number */ +#define SOL_EUNATCH 42 /* Driver for protocol not attached */ +#define SOL_ENOCSI 43 /* CSI structure not around */ +#define SOL_EL2HLT 44 /* Halted at run level 2 */ +#define SOL_EDEADLK 45 /* Deadlock condition detected */ +#define SOL_ENOLCK 46 /* Record locks unavailable */ +#define SOL_ECANCELED 47 /* Cancellation of oper. happened */ +#define SOL_ENOTSUP 48 /* Attempt of unsupported operation */ +#define SOL_EDQUOT 49 /* Users disk quota exceeded */ +#define SOL_EBADE 50 /* Invalid exchange */ +#define SOL_EBADR 51 /* Request descriptor was invalid */ +#define SOL_EXFULL 52 /* Full exchange */ +#define SOL_ENOANO 53 /* ano does not exist */ +#define SOL_EBADRQC 54 /* Req code was invalid */ +#define SOL_EBADSLT 55 /* Bad slot number */ +#define SOL_EDEADLOCK 56 /* Deadlock in fs error */ +#define SOL_EBFONT 57 /* Font file format invalid */ +/* YOW, I LOVE SYSV STREAMS!!!! */ +#define SOL_ENOSTR 60 /* Stream-op on non-stream dev */ +#define SOL_ENODATA 61 /* No data avail at this time */ +#define SOL_ETIME 62 /* Expiration of time occurred */ +#define SOL_ENOSR 63 /* Streams resources exhausted */ +#define SOL_ENONET 64 /* No network connected */ +#define SOL_ENOPKG 65 /* Non-installed package */ +#define SOL_EREMOTE 66 /* Object was on remote machine */ +#define SOL_ENOLINK 67 /* Cut link */ +#define SOL_EADV 68 /* Error in advertise */ +#define SOL_ESRMNT 69 /* Some magic srmount problem */ +#define SOL_ECOMM 70 /* During send, comm error occurred */ +#define SOL_EPROTO 71 /* Protocol botch */ +#define SOL_EMULTIHOP 74 /* Multihop attempted */ +#define SOL_EBADMSG 77 /* Message was unreadable */ +#define SOL_ENAMETOOLONG 78 /* Too long of a path name */ +#define SOL_EOVERFLOW 79 /* Data type too small for datum */ +#define SOL_ENOTUNIQ 80 /* Logical name was not unique */ +#define SOL_EBADFD 81 /* Op cannot be performed on fd */ +#define SOL_EREMCHG 82 /* Remote address is now different */ +#define SOL_ELIBACC 83 /* Shared lib could not be accessed */ +#define SOL_ELIBBAD 84 /* ShLib is corrupted in some way */ +#define SOL_ELIBSCN 85 /* A.out ShLib problems */ +#define SOL_ELIBMAX 86 /* Exceeded ShLib linkage limit */ +#define SOL_ELIBEXEC 87 /* Execution of ShLib attempted */ +#define SOL_EILSEQ 88 /* Bad byte sequence found */ +#define SOL_ENOSYS 89 /* Invalid filesystem operation */ +#define SOL_ELOOP 90 /* Detected loop in symbolic links */ +#define SOL_ERESTART 91 /* System call is restartable */ +#define SOL_ESTRPIPE 92 /* Do not sleep in head of stream */ +#define SOL_ENOTEMPTY 93 /* Rmdir of non-empty directory */ +#define SOL_EUSERS 94 /* Over abundance of users for ufs */ +#define SOL_ENOTSOCK 95 /* Sock-op on non-sock */ +#define SOL_EDESTADDRREQ 96 /* No dest addr given, but needed */ +#define SOL_EMSGSIZE 97 /* Msg too big */ +#define SOL_EPROTOTYPE 98 /* Bad socket protocol */ +#define SOL_ENOPROTOOPT 99 /* Unavailable protocol */ +#define SOL_EPROTONOSUPPORT 120 /* Unsupported protocol */ +#define SOL_ESOCKTNOSUPPORT 121 /* Unsupported socket type */ +#define SOL_EOPNOTSUPP 122 /* Unsupported sock-op */ +#define SOL_EPFNOSUPPORT 123 /* Unsupported protocol family */ +#define SOL_EAFNOSUPPORT 124 /* Unsup addr family for protocol */ +#define SOL_EADDRINUSE 125 /* Req addr is already in use */ +#define SOL_EADDRNOTAVAIL 126 /* Req addr not available right now */ +#define SOL_ENETDOWN 127 /* Your subnet is on fire */ +#define SOL_ENETUNREACH 128 /* Someone playing with gateway and */ + /* did not tell you he was going to */ +#define SOL_ENETRESET 129 /* Buy less-buggy ethernet cards */ +#define SOL_ECONNABORTED 130 /* Aborted connection due to sw */ +#define SOL_ECONNRESET 131 /* Your peers reset your connection */ +#define SOL_ENOBUFS 132 /* No buffer space available */ +#define SOL_EISCONN 133 /* Connect on already connected */ + /* socket attempted */ +#define SOL_ENOTCONN 134 /* Comm on non-connected socket */ +#define SOL_ESHUTDOWN 143 /* Op attempted after sock-shutdown */ +#define SOL_ETOOMANYREFS 144 /* Reference limit exceeded */ +#define SOL_ETIMEDOUT 145 /* Timed out connection */ +#define SOL_ECONNREFUSED 146 /* Connection refused by remote host*/ +#define SOL_EHOSTDOWN 147 /* Remote host is up in flames */ +#define SOL_EHOSTUNREACH 148 /* Make a left at Easton Ave..... */ +#define SOL_EWOULDBLOCK EAGAIN /* Just an alias */ +#define SOL_EALREADY 149 /* Operation is already occurring */ +#define SOL_EINPROGRESS 150 /* Operation is happening now */ +#define SOL_ESTALE 151 /* Fungus growth on NFS file handle */ + +#endif /* !(_SPARC_SOLERRNO_H) */ diff --git a/include/asm-sparc/spinlock.h b/include/asm-sparc/spinlock.h new file mode 100644 index 00000000000..0cbd87ad491 --- /dev/null +++ b/include/asm-sparc/spinlock.h @@ -0,0 +1,238 @@ +/* spinlock.h: 32-bit Sparc spinlock support. + * + * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef __SPARC_SPINLOCK_H +#define __SPARC_SPINLOCK_H + +#include <linux/threads.h> /* For NR_CPUS */ + +#ifndef __ASSEMBLY__ + +#include <asm/psr.h> + +#ifdef CONFIG_DEBUG_SPINLOCK +struct _spinlock_debug { + unsigned char lock; + unsigned long owner_pc; +#ifdef CONFIG_PREEMPT + unsigned int break_lock; +#endif +}; +typedef struct _spinlock_debug spinlock_t; + +#define SPIN_LOCK_UNLOCKED (spinlock_t) { 0, 0 } +#define spin_lock_init(lp) do { *(lp)= SPIN_LOCK_UNLOCKED; } while(0) +#define spin_is_locked(lp) (*((volatile unsigned char *)(&((lp)->lock))) != 0) +#define spin_unlock_wait(lp) do { barrier(); } while(*(volatile unsigned char *)(&(lp)->lock)) + +extern void _do_spin_lock(spinlock_t *lock, char *str); +extern int _spin_trylock(spinlock_t *lock); +extern void _do_spin_unlock(spinlock_t *lock); + +#define _raw_spin_trylock(lp) _spin_trylock(lp) +#define _raw_spin_lock(lock) _do_spin_lock(lock, "spin_lock") +#define _raw_spin_unlock(lock) _do_spin_unlock(lock) + +struct _rwlock_debug { + volatile unsigned int lock; + unsigned long owner_pc; + unsigned long reader_pc[NR_CPUS]; +#ifdef CONFIG_PREEMPT + unsigned int break_lock; +#endif +}; +typedef struct _rwlock_debug rwlock_t; + +#define RW_LOCK_UNLOCKED (rwlock_t) { 0, 0, {0} } + +#define rwlock_init(lp) do { *(lp)= RW_LOCK_UNLOCKED; } while(0) + +extern void _do_read_lock(rwlock_t *rw, char *str); +extern void _do_read_unlock(rwlock_t *rw, char *str); +extern void _do_write_lock(rwlock_t *rw, char *str); +extern void _do_write_unlock(rwlock_t *rw); + +#define _raw_read_lock(lock) \ +do { unsigned long flags; \ + local_irq_save(flags); \ + _do_read_lock(lock, "read_lock"); \ + local_irq_restore(flags); \ +} while(0) + +#define _raw_read_unlock(lock) \ +do { unsigned long flags; \ + local_irq_save(flags); \ + _do_read_unlock(lock, "read_unlock"); \ + local_irq_restore(flags); \ +} while(0) + +#define _raw_write_lock(lock) \ +do { unsigned long flags; \ + local_irq_save(flags); \ + _do_write_lock(lock, "write_lock"); \ + local_irq_restore(flags); \ +} while(0) + +#define _raw_write_unlock(lock) \ +do { unsigned long flags; \ + local_irq_save(flags); \ + _do_write_unlock(lock); \ + local_irq_restore(flags); \ +} while(0) + +#else /* !CONFIG_DEBUG_SPINLOCK */ + +typedef struct { + unsigned char lock; +#ifdef CONFIG_PREEMPT + unsigned int break_lock; +#endif +} spinlock_t; + +#define SPIN_LOCK_UNLOCKED (spinlock_t) { 0 } + +#define spin_lock_init(lock) (*((unsigned char *)(lock)) = 0) +#define spin_is_locked(lock) (*((volatile unsigned char *)(lock)) != 0) + +#define spin_unlock_wait(lock) \ +do { \ + barrier(); \ +} while(*((volatile unsigned char *)lock)) + +extern __inline__ void _raw_spin_lock(spinlock_t *lock) +{ + __asm__ __volatile__( + "\n1:\n\t" + "ldstub [%0], %%g2\n\t" + "orcc %%g2, 0x0, %%g0\n\t" + "bne,a 2f\n\t" + " ldub [%0], %%g2\n\t" + ".subsection 2\n" + "2:\n\t" + "orcc %%g2, 0x0, %%g0\n\t" + "bne,a 2b\n\t" + " ldub [%0], %%g2\n\t" + "b,a 1b\n\t" + ".previous\n" + : /* no outputs */ + : "r" (lock) + : "g2", "memory", "cc"); +} + +extern __inline__ int _raw_spin_trylock(spinlock_t *lock) +{ + unsigned int result; + __asm__ __volatile__("ldstub [%1], %0" + : "=r" (result) + : "r" (lock) + : "memory"); + return (result == 0); +} + +extern __inline__ void _raw_spin_unlock(spinlock_t *lock) +{ + __asm__ __volatile__("stb %%g0, [%0]" : : "r" (lock) : "memory"); +} + +/* Read-write spinlocks, allowing multiple readers + * but only one writer. + * + * NOTE! it is quite common to have readers in interrupts + * but no interrupt writers. For those circumstances we + * can "mix" irq-safe locks - any writer needs to get a + * irq-safe write-lock, but readers can get non-irqsafe + * read-locks. + * + * XXX This might create some problems with my dual spinlock + * XXX scheme, deadlocks etc. -DaveM + */ +typedef struct { + volatile unsigned int lock; +#ifdef CONFIG_PREEMPT + unsigned int break_lock; +#endif +} rwlock_t; + +#define RW_LOCK_UNLOCKED (rwlock_t) { 0 } + +#define rwlock_init(lp) do { *(lp)= RW_LOCK_UNLOCKED; } while(0) + + +/* Sort of like atomic_t's on Sparc, but even more clever. + * + * ------------------------------------ + * | 24-bit counter | wlock | rwlock_t + * ------------------------------------ + * 31 8 7 0 + * + * wlock signifies the one writer is in or somebody is updating + * counter. For a writer, if he successfully acquires the wlock, + * but counter is non-zero, he has to release the lock and wait, + * till both counter and wlock are zero. + * + * Unfortunately this scheme limits us to ~16,000,000 cpus. + */ +extern __inline__ void _read_lock(rwlock_t *rw) +{ + register rwlock_t *lp asm("g1"); + lp = rw; + __asm__ __volatile__( + "mov %%o7, %%g4\n\t" + "call ___rw_read_enter\n\t" + " ldstub [%%g1 + 3], %%g2\n" + : /* no outputs */ + : "r" (lp) + : "g2", "g4", "memory", "cc"); +} + +#define _raw_read_lock(lock) \ +do { unsigned long flags; \ + local_irq_save(flags); \ + _read_lock(lock); \ + local_irq_restore(flags); \ +} while(0) + +extern __inline__ void _read_unlock(rwlock_t *rw) +{ + register rwlock_t *lp asm("g1"); + lp = rw; + __asm__ __volatile__( + "mov %%o7, %%g4\n\t" + "call ___rw_read_exit\n\t" + " ldstub [%%g1 + 3], %%g2\n" + : /* no outputs */ + : "r" (lp) + : "g2", "g4", "memory", "cc"); +} + +#define _raw_read_unlock(lock) \ +do { unsigned long flags; \ + local_irq_save(flags); \ + _read_unlock(lock); \ + local_irq_restore(flags); \ +} while(0) + +extern __inline__ void _raw_write_lock(rwlock_t *rw) +{ + register rwlock_t *lp asm("g1"); + lp = rw; + __asm__ __volatile__( + "mov %%o7, %%g4\n\t" + "call ___rw_write_enter\n\t" + " ldstub [%%g1 + 3], %%g2\n" + : /* no outputs */ + : "r" (lp) + : "g2", "g4", "memory", "cc"); +} + +#define _raw_write_unlock(rw) do { (rw)->lock = 0; } while(0) + +#endif /* CONFIG_DEBUG_SPINLOCK */ + +#define _raw_spin_lock_flags(lock, flags) _raw_spin_lock(lock) + +#endif /* !(__ASSEMBLY__) */ + +#endif /* __SPARC_SPINLOCK_H */ diff --git a/include/asm-sparc/stat.h b/include/asm-sparc/stat.h new file mode 100644 index 00000000000..a5b4272f289 --- /dev/null +++ b/include/asm-sparc/stat.h @@ -0,0 +1,77 @@ +/* $Id: stat.h,v 1.12 2000/08/04 05:35:55 davem Exp $ */ +#ifndef _SPARC_STAT_H +#define _SPARC_STAT_H + +#include <linux/types.h> + +struct __old_kernel_stat { + unsigned short st_dev; + unsigned short st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned short st_rdev; + unsigned long st_size; + unsigned long st_atime; + unsigned long st_mtime; + unsigned long st_ctime; +}; + +struct stat { + unsigned short st_dev; + unsigned long st_ino; + unsigned short st_mode; + short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned short st_rdev; + long st_size; + long st_atime; + unsigned long st_atime_nsec; + long st_mtime; + unsigned long st_mtime_nsec; + long st_ctime; + unsigned long st_ctime_nsec; + long st_blksize; + long st_blocks; + unsigned long __unused4[2]; +}; + +#define STAT_HAVE_NSEC 1 + +struct stat64 { + unsigned long long st_dev; + + unsigned long long st_ino; + + unsigned int st_mode; + unsigned int st_nlink; + + unsigned int st_uid; + unsigned int st_gid; + + unsigned long long st_rdev; + + unsigned char __pad3[8]; + + long long st_size; + unsigned int st_blksize; + + unsigned char __pad4[8]; + unsigned int st_blocks; + + unsigned int st_atime; + unsigned int st_atime_nsec; + + unsigned int st_mtime; + unsigned int st_mtime_nsec; + + unsigned int st_ctime; + unsigned int st_ctime_nsec; + + unsigned int __unused4; + unsigned int __unused5; +}; + +#endif diff --git a/include/asm-sparc/statfs.h b/include/asm-sparc/statfs.h new file mode 100644 index 00000000000..d623f144247 --- /dev/null +++ b/include/asm-sparc/statfs.h @@ -0,0 +1,7 @@ +/* $Id: statfs.h,v 1.4 1996/06/07 00:41:05 ecd Exp $ */ +#ifndef _SPARC_STATFS_H +#define _SPARC_STATFS_H + +#include <asm-generic/statfs.h> + +#endif diff --git a/include/asm-sparc/string.h b/include/asm-sparc/string.h new file mode 100644 index 00000000000..cb1e923356c --- /dev/null +++ b/include/asm-sparc/string.h @@ -0,0 +1,205 @@ +/* $Id: string.h,v 1.36 2001/12/21 00:54:31 davem Exp $ + * string.h: External definitions for optimized assembly string + * routines for the Linux Kernel. + * + * Copyright (C) 1995,1996 David S. Miller (davem@caip.rutgers.edu) + * Copyright (C) 1996,1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz) + */ + +#ifndef __SPARC_STRING_H__ +#define __SPARC_STRING_H__ + +#include <asm/page.h> + +/* Really, userland/ksyms should not see any of this stuff. */ + +#ifdef __KERNEL__ + +extern void __memmove(void *,const void *,__kernel_size_t); +extern __kernel_size_t __memcpy(void *,const void *,__kernel_size_t); +extern __kernel_size_t __memset(void *,int,__kernel_size_t); + +#ifndef EXPORT_SYMTAB_STROPS + +/* First the mem*() things. */ +#define __HAVE_ARCH_MEMMOVE +#undef memmove +#define memmove(_to, _from, _n) \ +({ \ + void *_t = (_to); \ + __memmove(_t, (_from), (_n)); \ + _t; \ +}) + +#define __HAVE_ARCH_MEMCPY + +static inline void *__constant_memcpy(void *to, const void *from, __kernel_size_t n) +{ + extern void __copy_1page(void *, const void *); + + if(n <= 32) { + __builtin_memcpy(to, from, n); + } else if (((unsigned int) to & 7) != 0) { + /* Destination is not aligned on the double-word boundary */ + __memcpy(to, from, n); + } else { + switch(n) { + case PAGE_SIZE: + __copy_1page(to, from); + break; + default: + __memcpy(to, from, n); + break; + } + } + return to; +} + +static inline void *__nonconstant_memcpy(void *to, const void *from, __kernel_size_t n) +{ + __memcpy(to, from, n); + return to; +} + +#undef memcpy +#define memcpy(t, f, n) \ +(__builtin_constant_p(n) ? \ + __constant_memcpy((t),(f),(n)) : \ + __nonconstant_memcpy((t),(f),(n))) + +#define __HAVE_ARCH_MEMSET + +static inline void *__constant_c_and_count_memset(void *s, char c, __kernel_size_t count) +{ + extern void bzero_1page(void *); + extern __kernel_size_t __bzero(void *, __kernel_size_t); + + if(!c) { + if(count == PAGE_SIZE) + bzero_1page(s); + else + __bzero(s, count); + } else { + __memset(s, c, count); + } + return s; +} + +static inline void *__constant_c_memset(void *s, char c, __kernel_size_t count) +{ + extern __kernel_size_t __bzero(void *, __kernel_size_t); + + if(!c) + __bzero(s, count); + else + __memset(s, c, count); + return s; +} + +static inline void *__nonconstant_memset(void *s, char c, __kernel_size_t count) +{ + __memset(s, c, count); + return s; +} + +#undef memset +#define memset(s, c, count) \ +(__builtin_constant_p(c) ? (__builtin_constant_p(count) ? \ + __constant_c_and_count_memset((s), (c), (count)) : \ + __constant_c_memset((s), (c), (count))) \ + : __nonconstant_memset((s), (c), (count))) + +#define __HAVE_ARCH_MEMSCAN + +#undef memscan +#define memscan(__arg0, __char, __arg2) \ +({ \ + extern void *__memscan_zero(void *, size_t); \ + extern void *__memscan_generic(void *, int, size_t); \ + void *__retval, *__addr = (__arg0); \ + size_t __size = (__arg2); \ + \ + if(__builtin_constant_p(__char) && !(__char)) \ + __retval = __memscan_zero(__addr, __size); \ + else \ + __retval = __memscan_generic(__addr, (__char), __size); \ + \ + __retval; \ +}) + +#define __HAVE_ARCH_MEMCMP +extern int memcmp(const void *,const void *,__kernel_size_t); + +/* Now the str*() stuff... */ +#define __HAVE_ARCH_STRLEN +extern __kernel_size_t strlen(const char *); + +#define __HAVE_ARCH_STRNCMP + +extern int __strncmp(const char *, const char *, __kernel_size_t); + +static inline int __constant_strncmp(const char *src, const char *dest, __kernel_size_t count) +{ + register int retval; + switch(count) { + case 0: return 0; + case 1: return (src[0] - dest[0]); + case 2: retval = (src[0] - dest[0]); + if(!retval && src[0]) + retval = (src[1] - dest[1]); + return retval; + case 3: retval = (src[0] - dest[0]); + if(!retval && src[0]) { + retval = (src[1] - dest[1]); + if(!retval && src[1]) + retval = (src[2] - dest[2]); + } + return retval; + case 4: retval = (src[0] - dest[0]); + if(!retval && src[0]) { + retval = (src[1] - dest[1]); + if(!retval && src[1]) { + retval = (src[2] - dest[2]); + if (!retval && src[2]) + retval = (src[3] - dest[3]); + } + } + return retval; + case 5: retval = (src[0] - dest[0]); + if(!retval && src[0]) { + retval = (src[1] - dest[1]); + if(!retval && src[1]) { + retval = (src[2] - dest[2]); + if (!retval && src[2]) { + retval = (src[3] - dest[3]); + if (!retval && src[3]) + retval = (src[4] - dest[4]); + } + } + } + return retval; + default: + retval = (src[0] - dest[0]); + if(!retval && src[0]) { + retval = (src[1] - dest[1]); + if(!retval && src[1]) { + retval = (src[2] - dest[2]); + if(!retval && src[2]) + retval = __strncmp(src+3,dest+3,count-3); + } + } + return retval; + } +} + +#undef strncmp +#define strncmp(__arg0, __arg1, __arg2) \ +(__builtin_constant_p(__arg2) ? \ + __constant_strncmp(__arg0, __arg1, __arg2) : \ + __strncmp(__arg0, __arg1, __arg2)) + +#endif /* !EXPORT_SYMTAB_STROPS */ + +#endif /* __KERNEL__ */ + +#endif /* !(__SPARC_STRING_H__) */ diff --git a/include/asm-sparc/sun4paddr.h b/include/asm-sparc/sun4paddr.h new file mode 100644 index 00000000000..d863bfd5f09 --- /dev/null +++ b/include/asm-sparc/sun4paddr.h @@ -0,0 +1,56 @@ +/* $Id: sun4paddr.h,v 1.3 1998/07/28 16:53:27 jj Exp $ + * sun4paddr.h: Various physical addresses on sun4 machines + * + * Copyright (C) 1997 Anton Blanchard (anton@progsoc.uts.edu.au) + * Copyright (C) 1998 Chris Davis (cdavis@cois.on.ca) + * + * Now supports more sun4's + */ + +#ifndef _SPARC_SUN4PADDR_H +#define _SPARC_SUN4PADDR_H + +#define SUN4_IE_PHYSADDR 0xf5000000 +#define SUN4_UNUSED_PHYSADDR 0 + +/* these work for me */ +#define SUN4_200_MEMREG_PHYSADDR 0xf4000000 +#define SUN4_200_CLOCK_PHYSADDR 0xf3000000 +#define SUN4_200_BWTWO_PHYSADDR 0xfd000000 +#define SUN4_200_ETH_PHYSADDR 0xf6000000 +#define SUN4_200_SI_PHYSADDR 0xff200000 + +/* these were here before */ +#define SUN4_300_MEMREG_PHYSADDR 0xf4000000 +#define SUN4_300_CLOCK_PHYSADDR 0xf2000000 +#define SUN4_300_TIMER_PHYSADDR 0xef000000 +#define SUN4_300_ETH_PHYSADDR 0xf9000000 +#define SUN4_300_BWTWO_PHYSADDR 0xfb400000 +#define SUN4_300_DMA_PHYSADDR 0xfa001000 +#define SUN4_300_ESP_PHYSADDR 0xfa000000 + +/* Are these right? */ +#define SUN4_400_MEMREG_PHYSADDR 0xf4000000 +#define SUN4_400_CLOCK_PHYSADDR 0xf2000000 +#define SUN4_400_TIMER_PHYSADDR 0xef000000 +#define SUN4_400_ETH_PHYSADDR 0xf9000000 +#define SUN4_400_BWTWO_PHYSADDR 0xfb400000 +#define SUN4_400_DMA_PHYSADDR 0xfa001000 +#define SUN4_400_ESP_PHYSADDR 0xfa000000 + +/* + these are the actual values set and used in the code. Unused items set + to SUN_UNUSED_PHYSADDR + */ + +extern int sun4_memreg_physaddr; /* memory register (ecc?) */ +extern int sun4_clock_physaddr; /* system clock */ +extern int sun4_timer_physaddr; /* timer, where applicable */ +extern int sun4_eth_physaddr; /* onboard ethernet (ie/le) */ +extern int sun4_si_physaddr; /* sun3 scsi adapter */ +extern int sun4_bwtwo_physaddr; /* onboard bw2 */ +extern int sun4_dma_physaddr; /* scsi dma */ +extern int sun4_esp_physaddr; /* esp scsi */ +extern int sun4_ie_physaddr; /* interrupt enable */ + +#endif /* !(_SPARC_SUN4PADDR_H) */ diff --git a/include/asm-sparc/sun4prom.h b/include/asm-sparc/sun4prom.h new file mode 100644 index 00000000000..9c8b4cbf629 --- /dev/null +++ b/include/asm-sparc/sun4prom.h @@ -0,0 +1,83 @@ +/* + * sun4prom.h -- interface to sun4 PROM monitor. We don't use most of this, + * so most of these are just placeholders. + */ + +#ifndef _SUN4PROM_H_ +#define _SUN4PROM_H_ + +/* + * Although this looks similar to an romvec for a OpenProm machine, it is + * actually closer to what was used in the Sun2 and Sun3. + * + * V2 entries exist only in version 2 PROMs and later, V3 in version 3 and later. + * + * Many of the function prototypes are guesses. Some are certainly wrong. + * Use with care. + */ + +typedef struct { + char *initSP; /* Initial system stack ptr */ + void (*startmon)(void); /* Initial PC for hardware */ + int *diagberr; /* Bus err handler for diags */ + struct linux_arguments_v0 **bootParam; /* Info for bootstrapped pgm */ + unsigned int *memorysize; /* Usable memory in bytes */ + unsigned char (*getchar)(void); /* Get char from input device */ + void (*putchar)(char); /* Put char to output device */ + int (*mayget)(void); /* Maybe get char, or -1 */ + int (*mayput)(int); /* Maybe put char, or -1 */ + unsigned char *echo; /* Should getchar echo? */ + unsigned char *insource; /* Input source selector */ + unsigned char *outsink; /* Output sink selector */ + int (*getkey)(void); /* Get next key if one exists */ + void (*initgetkey)(void); /* Initialize get key */ + unsigned int *translation; /* Kbd translation selector */ + unsigned char *keybid; /* Keyboard ID byte */ + int *screen_x; /* V2: Screen x pos (r/o) */ + int *screen_y; /* V2: Screen y pos (r/o) */ + struct keybuf *keybuf; /* Up/down keycode buffer */ + char *monid; /* Monitor version ID */ + void (*fbwritechar)(char); /* Write a character to FB */ + int *fbAddr; /* Address of frame buffer */ + char **font; /* Font table for FB */ + void (*fbwritestr)(char *); /* Write string to FB */ + void (*reboot)(char *); /* e.g. reboot("sd()vmlinux") */ + unsigned char *linebuf; /* The line input buffer */ + unsigned char **lineptr; /* Cur pointer into linebuf */ + int *linesize; /* length of line in linebuf */ + void (*getline)(char *); /* Get line from user */ + unsigned char (*getnextchar)(void); /* Get next char from linebuf */ + unsigned char (*peeknextchar)(void); /* Peek at next char */ + int *fbthere; /* =1 if frame buffer there */ + int (*getnum)(void); /* Grab hex num from line */ + int (*printf)(char *, ...); /* See prom_printf() instead */ + void (*printhex)(int); /* Format N digits in hex */ + unsigned char *leds; /* RAM copy of LED register */ + void (*setLEDs)(unsigned char *); /* Sets LED's and RAM copy */ + void (*NMIaddr)(void *); /* Addr for level 7 vector */ + void (*abortentry)(void); /* Entry for keyboard abort */ + int *nmiclock; /* Counts up in msec */ + int *FBtype; /* Frame buffer type */ + unsigned int romvecversion; /* Version number for this romvec */ + struct globram *globram; /* monitor global variables ??? */ + void * kbdaddr; /* Addr of keyboard in use */ + int *keyrinit; /* ms before kbd repeat */ + unsigned char *keyrtick; /* ms between repetitions */ + unsigned int *memoryavail; /* V1: Main mem usable size */ + long *resetaddr; /* where to jump on a reset */ + long *resetmap; /* pgmap entry for resetaddr */ + void (*exittomon)(void); /* Exit from user program */ + unsigned char **memorybitmap; /* V1: &{0 or &bits} */ + void (*setcxsegmap)(int ctxt, char *va, int pmeg); /* Set seg in any context */ + void (**vector_cmd)(void *); /* V2: Handler for 'v' cmd */ + unsigned long *expectedtrapsig; /* V3: Location of the expected trap signal */ + unsigned long *trapvectorbasetable; /* V3: Address of the trap vector table */ + int unused1; + int unused2; + int unused3; + int unused4; +} linux_sun4_romvec; + +extern linux_sun4_romvec *sun4_romvec; + +#endif /* _SUN4PROM_H_ */ diff --git a/include/asm-sparc/sunbpp.h b/include/asm-sparc/sunbpp.h new file mode 100644 index 00000000000..568db79b730 --- /dev/null +++ b/include/asm-sparc/sunbpp.h @@ -0,0 +1,80 @@ +/* $Id: sunbpp.h,v 1.1 1999/08/08 14:09:49 shadow Exp $ + * include/asm-sparc/sunbpp.h + */ + +#ifndef _ASM_SPARC_SUNBPP_H +#define _ASM_SPARC_SUNBPP_H + +struct bpp_regs { + /* DMA registers */ + __volatile__ __u32 p_csr; /* DMA Control/Status Register */ + __volatile__ __u32 p_addr; /* Address Register */ + __volatile__ __u32 p_bcnt; /* Byte Count Register */ + __volatile__ __u32 p_tst_csr; /* Test Control/Status (DMA2 only) */ + /* Parallel Port registers */ + __volatile__ __u16 p_hcr; /* Hardware Configuration Register */ + __volatile__ __u16 p_ocr; /* Operation Configuration Register */ + __volatile__ __u8 p_dr; /* Parallel Data Register */ + __volatile__ __u8 p_tcr; /* Transfer Control Register */ + __volatile__ __u8 p_or; /* Output Register */ + __volatile__ __u8 p_ir; /* Input Register */ + __volatile__ __u16 p_icr; /* Interrupt Control Register */ +}; + +/* P_HCR. Time is in increments of SBus clock. */ +#define P_HCR_TEST 0x8000 /* Allows buried counters to be read */ +#define P_HCR_DSW 0x7f00 /* Data strobe width (in ticks) */ +#define P_HCR_DDS 0x007f /* Data setup before strobe (in ticks) */ + +/* P_OCR. */ +#define P_OCR_MEM_CLR 0x8000 +#define P_OCR_DATA_SRC 0x4000 /* ) */ +#define P_OCR_DS_DSEL 0x2000 /* ) Bidirectional */ +#define P_OCR_BUSY_DSEL 0x1000 /* ) selects */ +#define P_OCR_ACK_DSEL 0x0800 /* ) */ +#define P_OCR_EN_DIAG 0x0400 +#define P_OCR_BUSY_OP 0x0200 /* Busy operation */ +#define P_OCR_ACK_OP 0x0100 /* Ack operation */ +#define P_OCR_SRST 0x0080 /* Reset state machines. Not selfcleaning. */ +#define P_OCR_IDLE 0x0008 /* PP data transfer state machine is idle */ +#define P_OCR_V_ILCK 0x0002 /* Versatec faded. Zebra only. */ +#define P_OCR_EN_VER 0x0001 /* Enable Versatec (0 - enable). Zebra only. */ + +/* P_TCR */ +#define P_TCR_DIR 0x08 +#define P_TCR_BUSY 0x04 +#define P_TCR_ACK 0x02 +#define P_TCR_DS 0x01 /* Strobe */ + +/* P_OR */ +#define P_OR_V3 0x20 /* ) */ +#define P_OR_V2 0x10 /* ) on Zebra only */ +#define P_OR_V1 0x08 /* ) */ +#define P_OR_INIT 0x04 +#define P_OR_AFXN 0x02 /* Auto Feed */ +#define P_OR_SLCT_IN 0x01 + +/* P_IR */ +#define P_IR_PE 0x04 +#define P_IR_SLCT 0x02 +#define P_IR_ERR 0x01 + +/* P_ICR */ +#define P_DS_IRQ 0x8000 /* RW1 */ +#define P_ACK_IRQ 0x4000 /* RW1 */ +#define P_BUSY_IRQ 0x2000 /* RW1 */ +#define P_PE_IRQ 0x1000 /* RW1 */ +#define P_SLCT_IRQ 0x0800 /* RW1 */ +#define P_ERR_IRQ 0x0400 /* RW1 */ +#define P_DS_IRQ_EN 0x0200 /* RW Always on rising edge */ +#define P_ACK_IRQ_EN 0x0100 /* RW Always on rising edge */ +#define P_BUSY_IRP 0x0080 /* RW 1= rising edge */ +#define P_BUSY_IRQ_EN 0x0040 /* RW */ +#define P_PE_IRP 0x0020 /* RW 1= rising edge */ +#define P_PE_IRQ_EN 0x0010 /* RW */ +#define P_SLCT_IRP 0x0008 /* RW 1= rising edge */ +#define P_SLCT_IRQ_EN 0x0004 /* RW */ +#define P_ERR_IRP 0x0002 /* RW1 1= rising edge */ +#define P_ERR_IRQ_EN 0x0001 /* RW */ + +#endif /* !(_ASM_SPARC_SUNBPP_H) */ diff --git a/include/asm-sparc/svr4.h b/include/asm-sparc/svr4.h new file mode 100644 index 00000000000..da1f1c980e2 --- /dev/null +++ b/include/asm-sparc/svr4.h @@ -0,0 +1,119 @@ +/* Solaris/SPARC constants and definitions -- + * (C) 1996 Miguel de Icaza + * + * This file is not meant to be included by user level applications + * but the solaris syscall emulator + */ + +#ifndef _SPARC_SVR4_H +#define _SPARC_SVR4_H + +/* Signals as used by svr4 */ +typedef struct { /* signal set type */ + ulong sigbits[4]; +} svr4_sigset_t; + +/* Values for siginfo.code */ +#define SVR4_SINOINFO 32767 +/* Siginfo, sucker expects bunch of information on those parameters */ +typedef union { + char total_size [128]; + struct { + int signo; + int code; + int error; + union { + } data; + } siginfo; +} svr4_siginfo_t; + +/* Context definition */ + +/* Location of the user stored registers into a greg_t */ +enum { + SVR4_PSR, SVR4_PC, SVR4_NPC, SVR4_Y, + SVR4_G1, SVR4_G2, SVR4_G3, SVR4_G4, + SVR4_G5, SVR4_G6, SVR4_G7, SVR4_O0, + SVR4_O1, SVR4_O2, SVR4_O3, SVR4_O4, + SVR4_O5, SVR4_O6, SVR4_O7 +}; + +/* sizeof (regs) / sizeof (greg_t), defined in the ABI */ +#define SVR4_NREGS 19 +#define SVR4_MAXWIN 31 + +typedef struct { + uint rwin_lo[8]; + uint rwin_in[8]; +} svr4_rwindow_t; + +typedef struct { + int count; + int __user *winptr [SVR4_MAXWIN]; /* pointer to the windows */ + svr4_rwindow_t win[SVR4_MAXWIN]; /* the windows */ +} svr4_gwindows_t; + +typedef int svr4_gregset_t[SVR4_NREGS]; + +typedef struct { + double fpu_regs[32]; + void *fp_q; + unsigned fp_fsr; + u_char fp_nqel; + u_char fp_nqsize; + u_char inuse; /* if fpu is in use */ +} svr4_fregset_t; + +typedef struct { + uint id; /* if this holds "xrs" string => ptr is valid */ + caddr_t ptr; +} svr4_xrs_t; + +/* Machine dependent context */ +typedef struct { + svr4_gregset_t greg; /* registers 0..19 (see top) */ + svr4_gwindows_t __user *gwin; /* may point to register windows */ + svr4_fregset_t freg; /* floating point registers */ + svr4_xrs_t xrs; /* mhm? */ + long pad[19]; +} svr4_mcontext_t; + +/* flags for stack_t.flags */ +enum svr4_stack_flags { + SVR4_SS_ONSTACK, + SVR4_SS_DISABLE, +}; + +/* signal stack exection place, unsupported */ +typedef struct svr4_stack_t { + char __user *sp; + int size; + int flags; +} svr4_stack_t; + +/* Context used by getcontext and setcontext */ +typedef struct svr4_ucontext_t { + u_long flags; /* context flags, indicate what is loaded */ + struct svr4_ucontext *link; + svr4_sigset_t sigmask; + svr4_stack_t stack; + svr4_mcontext_t mcontext; + long pad[23]; +} svr4_ucontext_t; + +/* windows hold the windows as they were at signal time, + * ucontext->mcontext holds a pointer to them. + * addresses for uc and si are passed as parameters to svr4 signal + * handler + */ + +/* This is the signal frame that is passed to the signal handler */ +typedef struct { + svr4_gwindows_t gw; /* windows */ + svr4_ucontext_t uc; /* machine context */ + svr4_siginfo_t si; /* siginfo */ +} svr4_signal_frame_t; + +#define SVR4_SF_ALIGNED (((sizeof (svr4_signal_frame_t) + 7) & (~7))) + +#endif /* include control */ diff --git a/include/asm-sparc/swift.h b/include/asm-sparc/swift.h new file mode 100644 index 00000000000..e535061bf75 --- /dev/null +++ b/include/asm-sparc/swift.h @@ -0,0 +1,106 @@ +/* swift.h: Specific definitions for the _broken_ Swift SRMMU + * MMU module. + * + * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef _SPARC_SWIFT_H +#define _SPARC_SWIFT_H + +/* Swift is so brain damaged, here is the mmu control register. */ +#define SWIFT_ST 0x00800000 /* SW tablewalk enable */ +#define SWIFT_WP 0x00400000 /* Watchpoint enable */ + +/* Branch folding (buggy, disable on production systems!) */ +#define SWIFT_BF 0x00200000 +#define SWIFT_PMC 0x00180000 /* Page mode control */ +#define SWIFT_PE 0x00040000 /* Parity enable */ +#define SWIFT_PC 0x00020000 /* Parity control */ +#define SWIFT_AP 0x00010000 /* Graphics page mode control (TCX/SX) */ +#define SWIFT_AC 0x00008000 /* Alternate Cacheability (see viking.h) */ +#define SWIFT_BM 0x00004000 /* Boot mode */ +#define SWIFT_RC 0x00003c00 /* DRAM refresh control */ +#define SWIFT_IE 0x00000200 /* Instruction cache enable */ +#define SWIFT_DE 0x00000100 /* Data cache enable */ +#define SWIFT_SA 0x00000080 /* Store Allocate */ +#define SWIFT_NF 0x00000002 /* No fault mode */ +#define SWIFT_EN 0x00000001 /* MMU enable */ + +/* Bits [13:5] select one of 512 instruction cache tags */ +static inline void swift_inv_insn_tag(unsigned long addr) +{ + __asm__ __volatile__("sta %%g0, [%0] %1\n\t" + : /* no outputs */ + : "r" (addr), "i" (ASI_M_TXTC_TAG) + : "memory"); +} + +/* Bits [12:4] select one of 512 data cache tags */ +static inline void swift_inv_data_tag(unsigned long addr) +{ + __asm__ __volatile__("sta %%g0, [%0] %1\n\t" + : /* no outputs */ + : "r" (addr), "i" (ASI_M_DATAC_TAG) + : "memory"); +} + +static inline void swift_flush_dcache(void) +{ + unsigned long addr; + + for (addr = 0; addr < 0x2000; addr += 0x10) + swift_inv_data_tag(addr); +} + +static inline void swift_flush_icache(void) +{ + unsigned long addr; + + for (addr = 0; addr < 0x4000; addr += 0x20) + swift_inv_insn_tag(addr); +} + +static inline void swift_idflash_clear(void) +{ + unsigned long addr; + + for (addr = 0; addr < 0x2000; addr += 0x10) { + swift_inv_insn_tag(addr<<1); + swift_inv_data_tag(addr); + } +} + +/* Swift is so broken, it isn't even safe to use the following. */ +static inline void swift_flush_page(unsigned long page) +{ + __asm__ __volatile__("sta %%g0, [%0] %1\n\t" + : /* no outputs */ + : "r" (page), "i" (ASI_M_FLUSH_PAGE) + : "memory"); +} + +static inline void swift_flush_segment(unsigned long addr) +{ + __asm__ __volatile__("sta %%g0, [%0] %1\n\t" + : /* no outputs */ + : "r" (addr), "i" (ASI_M_FLUSH_SEG) + : "memory"); +} + +static inline void swift_flush_region(unsigned long addr) +{ + __asm__ __volatile__("sta %%g0, [%0] %1\n\t" + : /* no outputs */ + : "r" (addr), "i" (ASI_M_FLUSH_REGION) + : "memory"); +} + +static inline void swift_flush_context(void) +{ + __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t" + : /* no outputs */ + : "i" (ASI_M_FLUSH_CTX) + : "memory"); +} + +#endif /* !(_SPARC_SWIFT_H) */ diff --git a/include/asm-sparc/sysen.h b/include/asm-sparc/sysen.h new file mode 100644 index 00000000000..692fa6f2296 --- /dev/null +++ b/include/asm-sparc/sysen.h @@ -0,0 +1,15 @@ +/* $Id: sysen.h,v 1.3 1995/11/25 02:32:58 davem Exp $ + * sysen.h: Bit fields within the "System Enable" register accessed via + * the ASI_CONTROL address space at address AC_SYSENABLE. + * + * Copyright (C) 1994 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef _SPARC_SYSEN_H +#define _SPARC_SYSEN_H + +#define SENABLE_DVMA 0x20 /* enable dvma transfers */ +#define SENABLE_CACHE 0x10 /* enable VAC cache */ +#define SENABLE_RESET 0x04 /* reset whole machine, danger Will Robinson */ + +#endif /* _SPARC_SYSEN_H */ diff --git a/include/asm-sparc/system.h b/include/asm-sparc/system.h new file mode 100644 index 00000000000..80cf20cfaee --- /dev/null +++ b/include/asm-sparc/system.h @@ -0,0 +1,262 @@ +/* $Id: system.h,v 1.86 2001/10/30 04:57:10 davem Exp $ */ +#include <linux/config.h> + +#ifndef __SPARC_SYSTEM_H +#define __SPARC_SYSTEM_H + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/threads.h> /* NR_CPUS */ +#include <linux/thread_info.h> + +#include <asm/segment.h> +#include <asm/page.h> +#include <asm/psr.h> +#include <asm/ptrace.h> +#include <asm/btfixup.h> + +#ifndef __ASSEMBLY__ + +/* + * Sparc (general) CPU types + */ +enum sparc_cpu { + sun4 = 0x00, + sun4c = 0x01, + sun4m = 0x02, + sun4d = 0x03, + sun4e = 0x04, + sun4u = 0x05, /* V8 ploos ploos */ + sun_unknown = 0x06, + ap1000 = 0x07, /* almost a sun4m */ +}; + +/* Really, userland should not be looking at any of this... */ +#ifdef __KERNEL__ + +extern enum sparc_cpu sparc_cpu_model; + +#ifndef CONFIG_SUN4 +#define ARCH_SUN4C_SUN4 (sparc_cpu_model==sun4c) +#define ARCH_SUN4 0 +#else +#define ARCH_SUN4C_SUN4 1 +#define ARCH_SUN4 1 +#endif + +#define SUN4M_NCPUS 4 /* Architectural limit of sun4m. */ + +extern struct thread_info *current_set[NR_CPUS]; + +extern unsigned long empty_bad_page; +extern unsigned long empty_bad_page_table; +extern unsigned long empty_zero_page; + +extern void sun_do_break(void); +extern int serial_console; +extern int stop_a_enabled; + +static __inline__ int con_is_present(void) +{ + return serial_console ? 0 : 1; +} + +/* When a context switch happens we must flush all user windows so that + * the windows of the current process are flushed onto its stack. This + * way the windows are all clean for the next process and the stack + * frames are up to date. + */ +extern void flush_user_windows(void); +extern void kill_user_windows(void); +extern void synchronize_user_stack(void); +extern void fpsave(unsigned long *fpregs, unsigned long *fsr, + void *fpqueue, unsigned long *fpqdepth); + +#ifdef CONFIG_SMP +#define SWITCH_ENTER(prv) \ + do { \ + if (test_tsk_thread_flag(prv, TIF_USEDFPU)) { \ + put_psr(get_psr() | PSR_EF); \ + fpsave(&(prv)->thread.float_regs[0], &(prv)->thread.fsr, \ + &(prv)->thread.fpqueue[0], &(prv)->thread.fpqdepth); \ + clear_tsk_thread_flag(prv, TIF_USEDFPU); \ + (prv)->thread.kregs->psr &= ~PSR_EF; \ + } \ + } while(0) + +#define SWITCH_DO_LAZY_FPU(next) /* */ +#else +#define SWITCH_ENTER(prv) /* */ +#define SWITCH_DO_LAZY_FPU(nxt) \ + do { \ + if (last_task_used_math != (nxt)) \ + (nxt)->thread.kregs->psr&=~PSR_EF; \ + } while(0) +#endif + +/* + * Flush windows so that the VM switch which follows + * would not pull the stack from under us. + * + * SWITCH_ENTER and SWITH_DO_LAZY_FPU do not work yet (e.g. SMP does not work) + * XXX WTF is the above comment? Found in late teen 2.4.x. + */ +#define prepare_arch_switch(rq, next) do { \ + __asm__ __volatile__( \ + ".globl\tflush_patch_switch\nflush_patch_switch:\n\t" \ + "save %sp, -0x40, %sp; save %sp, -0x40, %sp; save %sp, -0x40, %sp\n\t" \ + "save %sp, -0x40, %sp; save %sp, -0x40, %sp; save %sp, -0x40, %sp\n\t" \ + "save %sp, -0x40, %sp\n\t" \ + "restore; restore; restore; restore; restore; restore; restore"); \ +} while(0) +#define finish_arch_switch(rq, next) spin_unlock_irq(&(rq)->lock) +#define task_running(rq, p) ((rq)->curr == (p)) + + /* Much care has gone into this code, do not touch it. + * + * We need to loadup regs l0/l1 for the newly forked child + * case because the trap return path relies on those registers + * holding certain values, gcc is told that they are clobbered. + * Gcc needs registers for 3 values in and 1 value out, so we + * clobber every non-fixed-usage register besides l2/l3/o4/o5. -DaveM + * + * Hey Dave, that do not touch sign is too much of an incentive + * - Anton & Pete + */ +#define switch_to(prev, next, last) do { \ + SWITCH_ENTER(prev); \ + SWITCH_DO_LAZY_FPU(next); \ + cpu_set(smp_processor_id(), next->active_mm->cpu_vm_mask); \ + __asm__ __volatile__( \ + "sethi %%hi(here - 0x8), %%o7\n\t" \ + "mov %%g6, %%g3\n\t" \ + "or %%o7, %%lo(here - 0x8), %%o7\n\t" \ + "rd %%psr, %%g4\n\t" \ + "std %%sp, [%%g6 + %4]\n\t" \ + "rd %%wim, %%g5\n\t" \ + "wr %%g4, 0x20, %%psr\n\t" \ + "nop\n\t" \ + "std %%g4, [%%g6 + %3]\n\t" \ + "ldd [%2 + %3], %%g4\n\t" \ + "mov %2, %%g6\n\t" \ + ".globl patchme_store_new_current\n" \ +"patchme_store_new_current:\n\t" \ + "st %2, [%1]\n\t" \ + "wr %%g4, 0x20, %%psr\n\t" \ + "nop\n\t" \ + "nop\n\t" \ + "nop\n\t" /* LEON needs all 3 nops: load to %sp depends on CWP. */ \ + "ldd [%%g6 + %4], %%sp\n\t" \ + "wr %%g5, 0x0, %%wim\n\t" \ + "ldd [%%sp + 0x00], %%l0\n\t" \ + "ldd [%%sp + 0x38], %%i6\n\t" \ + "wr %%g4, 0x0, %%psr\n\t" \ + "nop\n\t" \ + "nop\n\t" \ + "jmpl %%o7 + 0x8, %%g0\n\t" \ + " ld [%%g3 + %5], %0\n\t" \ + "here:\n" \ + : "=&r" (last) \ + : "r" (&(current_set[hard_smp_processor_id()])), \ + "r" ((next)->thread_info), \ + "i" (TI_KPSR), \ + "i" (TI_KSP), \ + "i" (TI_TASK) \ + : "g1", "g2", "g3", "g4", "g5", "g7", \ + "l0", "l1", "l3", "l4", "l5", "l6", "l7", \ + "i0", "i1", "i2", "i3", "i4", "i5", \ + "o0", "o1", "o2", "o3", "o7"); \ + } while(0) + +/* + * Changing the IRQ level on the Sparc. + */ +extern void local_irq_restore(unsigned long); +extern unsigned long __local_irq_save(void); +extern void local_irq_enable(void); + +static inline unsigned long getipl(void) +{ + unsigned long retval; + + __asm__ __volatile__("rd %%psr, %0" : "=r" (retval)); + return retval; +} + +#define local_save_flags(flags) ((flags) = getipl()) +#define local_irq_save(flags) ((flags) = __local_irq_save()) +#define local_irq_disable() ((void) __local_irq_save()) +#define irqs_disabled() ((getipl() & PSR_PIL) != 0) + +/* XXX Change this if we ever use a PSO mode kernel. */ +#define mb() __asm__ __volatile__ ("" : : : "memory") +#define rmb() mb() +#define wmb() mb() +#define read_barrier_depends() do { } while(0) +#define set_mb(__var, __value) do { __var = __value; mb(); } while(0) +#define set_wmb(__var, __value) set_mb(__var, __value) +#define smp_mb() __asm__ __volatile__("":::"memory") +#define smp_rmb() __asm__ __volatile__("":::"memory") +#define smp_wmb() __asm__ __volatile__("":::"memory") +#define smp_read_barrier_depends() do { } while(0) + +#define nop() __asm__ __volatile__ ("nop") + +/* This has special calling conventions */ +#ifndef CONFIG_SMP +BTFIXUPDEF_CALL(void, ___xchg32, void) +#endif + +extern __inline__ unsigned long xchg_u32(__volatile__ unsigned long *m, unsigned long val) +{ +#ifdef CONFIG_SMP + __asm__ __volatile__("swap [%2], %0" + : "=&r" (val) + : "0" (val), "r" (m) + : "memory"); + return val; +#else + register unsigned long *ptr asm("g1"); + register unsigned long ret asm("g2"); + + ptr = (unsigned long *) m; + ret = val; + + /* Note: this is magic and the nop there is + really needed. */ + __asm__ __volatile__( + "mov %%o7, %%g4\n\t" + "call ___f____xchg32\n\t" + " nop\n\t" + : "=&r" (ret) + : "0" (ret), "r" (ptr) + : "g3", "g4", "g7", "memory", "cc"); + + return ret; +#endif +} + +#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) +#define tas(ptr) (xchg((ptr),1)) + +extern void __xchg_called_with_bad_pointer(void); + +static __inline__ unsigned long __xchg(unsigned long x, __volatile__ void * ptr, int size) +{ + switch (size) { + case 4: + return xchg_u32(ptr, x); + }; + __xchg_called_with_bad_pointer(); + return x; +} + +extern void die_if_kernel(char *str, struct pt_regs *regs) __attribute__ ((noreturn)); + +#endif /* __KERNEL__ */ + +#endif /* __ASSEMBLY__ */ + +#define arch_align_stack(x) (x) + +#endif /* !(__SPARC_SYSTEM_H) */ diff --git a/include/asm-sparc/termbits.h b/include/asm-sparc/termbits.h new file mode 100644 index 00000000000..1794d71134b --- /dev/null +++ b/include/asm-sparc/termbits.h @@ -0,0 +1,234 @@ +#ifndef _SPARC_TERMBITS_H +#define _SPARC_TERMBITS_H + +#include <linux/posix_types.h> + +typedef unsigned char cc_t; +typedef unsigned int speed_t; +typedef unsigned long tcflag_t; + +#define NCC 8 +struct termio { + unsigned short c_iflag; /* input mode flags */ + unsigned short c_oflag; /* output mode flags */ + unsigned short c_cflag; /* control mode flags */ + unsigned short c_lflag; /* local mode flags */ + unsigned char c_line; /* line discipline */ + unsigned char c_cc[NCC]; /* control characters */ +}; + +#define NCCS 17 +struct termios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ +#ifdef __KERNEL__ +#define SIZEOF_USER_TERMIOS sizeof (struct termios) - (2*sizeof (cc_t)) + cc_t _x_cc[2]; /* We need them to hold vmin/vtime */ +#endif +}; + +/* c_cc characters */ +#define VINTR 0 +#define VQUIT 1 +#define VERASE 2 +#define VKILL 3 +#define VEOF 4 +#define VEOL 5 +#define VEOL2 6 +#define VSWTC 7 +#define VSTART 8 +#define VSTOP 9 + + + +#define VSUSP 10 +#define VDSUSP 11 /* SunOS POSIX nicety I do believe... */ +#define VREPRINT 12 +#define VDISCARD 13 +#define VWERASE 14 +#define VLNEXT 15 + +/* Kernel keeps vmin/vtime separated, user apps assume vmin/vtime is + * shared with eof/eol + */ +#ifdef __KERNEL__ +#define VMIN 16 +#define VTIME 17 +#else +#define VMIN VEOF +#define VTIME VEOL +#endif + +/* c_iflag bits */ +#define IGNBRK 0x00000001 +#define BRKINT 0x00000002 +#define IGNPAR 0x00000004 +#define PARMRK 0x00000008 +#define INPCK 0x00000010 +#define ISTRIP 0x00000020 +#define INLCR 0x00000040 +#define IGNCR 0x00000080 +#define ICRNL 0x00000100 +#define IUCLC 0x00000200 +#define IXON 0x00000400 +#define IXANY 0x00000800 +#define IXOFF 0x00001000 +#define IMAXBEL 0x00002000 +#define IUTF8 0x00004000 + +/* c_oflag bits */ +#define OPOST 0x00000001 +#define OLCUC 0x00000002 +#define ONLCR 0x00000004 +#define OCRNL 0x00000008 +#define ONOCR 0x00000010 +#define ONLRET 0x00000020 +#define OFILL 0x00000040 +#define OFDEL 0x00000080 +#define NLDLY 0x00000100 +#define NL0 0x00000000 +#define NL1 0x00000100 +#define CRDLY 0x00000600 +#define CR0 0x00000000 +#define CR1 0x00000200 +#define CR2 0x00000400 +#define CR3 0x00000600 +#define TABDLY 0x00001800 +#define TAB0 0x00000000 +#define TAB1 0x00000800 +#define TAB2 0x00001000 +#define TAB3 0x00001800 +#define XTABS 0x00001800 +#define BSDLY 0x00002000 +#define BS0 0x00000000 +#define BS1 0x00002000 +#define VTDLY 0x00004000 +#define VT0 0x00000000 +#define VT1 0x00004000 +#define FFDLY 0x00008000 +#define FF0 0x00000000 +#define FF1 0x00008000 +#define PAGEOUT 0x00010000 /* SUNOS specific */ +#define WRAP 0x00020000 /* SUNOS specific */ + +/* c_cflag bit meaning */ +#define CBAUD 0x0000100f +#define B0 0x00000000 /* hang up */ +#define B50 0x00000001 +#define B75 0x00000002 +#define B110 0x00000003 +#define B134 0x00000004 +#define B150 0x00000005 +#define B200 0x00000006 +#define B300 0x00000007 +#define B600 0x00000008 +#define B1200 0x00000009 +#define B1800 0x0000000a +#define B2400 0x0000000b +#define B4800 0x0000000c +#define B9600 0x0000000d +#define B19200 0x0000000e +#define B38400 0x0000000f +#define EXTA B19200 +#define EXTB B38400 +#define CSIZE 0x00000030 +#define CS5 0x00000000 +#define CS6 0x00000010 +#define CS7 0x00000020 +#define CS8 0x00000030 +#define CSTOPB 0x00000040 +#define CREAD 0x00000080 +#define PARENB 0x00000100 +#define PARODD 0x00000200 +#define HUPCL 0x00000400 +#define CLOCAL 0x00000800 +#define CBAUDEX 0x00001000 +/* We'll never see these speeds with the Zilogs, but for completeness... */ +#define B57600 0x00001001 +#define B115200 0x00001002 +#define B230400 0x00001003 +#define B460800 0x00001004 +/* This is what we can do with the Zilogs. */ +#define B76800 0x00001005 +/* This is what we can do with the SAB82532. */ +#define B153600 0x00001006 +#define B307200 0x00001007 +#define B614400 0x00001008 +#define B921600 0x00001009 +/* And these are the rest... */ +#define B500000 0x0000100a +#define B576000 0x0000100b +#define B1000000 0x0000100c +#define B1152000 0x0000100d +#define B1500000 0x0000100e +#define B2000000 0x0000100f +/* These have totally bogus values and nobody uses them + so far. Later on we'd have to use say 0x10000x and + adjust CBAUD constant and drivers accordingly. +#define B2500000 0x00001010 +#define B3000000 0x00001011 +#define B3500000 0x00001012 +#define B4000000 0x00001013 */ +#define CIBAUD 0x100f0000 /* input baud rate (not used) */ +#define CMSPAR 0x40000000 /* mark or space (stick) parity */ +#define CRTSCTS 0x80000000 /* flow control */ + +/* c_lflag bits */ +#define ISIG 0x00000001 +#define ICANON 0x00000002 +#define XCASE 0x00000004 +#define ECHO 0x00000008 +#define ECHOE 0x00000010 +#define ECHOK 0x00000020 +#define ECHONL 0x00000040 +#define NOFLSH 0x00000080 +#define TOSTOP 0x00000100 +#define ECHOCTL 0x00000200 +#define ECHOPRT 0x00000400 +#define ECHOKE 0x00000800 +#define DEFECHO 0x00001000 /* SUNOS thing, what is it? */ +#define FLUSHO 0x00002000 +#define PENDIN 0x00004000 +#define IEXTEN 0x00008000 + +/* modem lines */ +#define TIOCM_LE 0x001 +#define TIOCM_DTR 0x002 +#define TIOCM_RTS 0x004 +#define TIOCM_ST 0x008 +#define TIOCM_SR 0x010 +#define TIOCM_CTS 0x020 +#define TIOCM_CAR 0x040 +#define TIOCM_RNG 0x080 +#define TIOCM_DSR 0x100 +#define TIOCM_CD TIOCM_CAR +#define TIOCM_RI TIOCM_RNG +#define TIOCM_OUT1 0x2000 +#define TIOCM_OUT2 0x4000 +#define TIOCM_LOOP 0x8000 + +/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ +#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ + + +/* tcflow() and TCXONC use these */ +#define TCOOFF 0 +#define TCOON 1 +#define TCIOFF 2 +#define TCION 3 + +/* tcflush() and TCFLSH use these */ +#define TCIFLUSH 0 +#define TCOFLUSH 1 +#define TCIOFLUSH 2 + +/* tcsetattr uses these */ +#define TCSANOW 0 +#define TCSADRAIN 1 +#define TCSAFLUSH 2 + +#endif /* !(_SPARC_TERMBITS_H) */ diff --git a/include/asm-sparc/termios.h b/include/asm-sparc/termios.h new file mode 100644 index 00000000000..0a8ad4cac12 --- /dev/null +++ b/include/asm-sparc/termios.h @@ -0,0 +1,174 @@ +/* $Id: termios.h,v 1.32 2001/06/01 08:12:11 davem Exp $ */ +#ifndef _SPARC_TERMIOS_H +#define _SPARC_TERMIOS_H + +#include <asm/ioctls.h> +#include <asm/termbits.h> + +#if defined(__KERNEL__) || defined(__DEFINE_BSD_TERMIOS) +struct sgttyb { + char sg_ispeed; + char sg_ospeed; + char sg_erase; + char sg_kill; + short sg_flags; +}; + +struct tchars { + char t_intrc; + char t_quitc; + char t_startc; + char t_stopc; + char t_eofc; + char t_brkc; +}; + +struct ltchars { + char t_suspc; + char t_dsuspc; + char t_rprntc; + char t_flushc; + char t_werasc; + char t_lnextc; +}; +#endif /* __KERNEL__ */ + +struct sunos_ttysize { + int st_lines; /* Lines on the terminal */ + int st_columns; /* Columns on the terminal */ +}; + +/* Used for packet mode */ +#define TIOCPKT_DATA 0 +#define TIOCPKT_FLUSHREAD 1 +#define TIOCPKT_FLUSHWRITE 2 +#define TIOCPKT_STOP 4 +#define TIOCPKT_START 8 +#define TIOCPKT_NOSTOP 16 +#define TIOCPKT_DOSTOP 32 + +struct winsize { + unsigned short ws_row; + unsigned short ws_col; + unsigned short ws_xpixel; + unsigned short ws_ypixel; +}; + +/* line disciplines */ +#define N_TTY 0 +#define N_SLIP 1 +#define N_MOUSE 2 +#define N_PPP 3 +#define N_STRIP 4 +#define N_AX25 5 +#define N_X25 6 +#define N_6PACK 7 +#define N_MASC 8 /* Reserved for Mobitex module <kaz@cafe.net> */ +#define N_R3964 9 /* Reserved for Simatic R3964 module */ +#define N_PROFIBUS_FDL 10 /* Reserved for Profibus <Dave@mvhi.com> */ +#define N_IRDA 11 /* Linux IrDa - http://irda.sourceforge.net/ */ +#define N_SMSBLOCK 12 /* SMS block mode - for talking to GSM data cards about SMS messages */ +#define N_HDLC 13 /* synchronous HDLC */ +#define N_SYNC_PPP 14 /* synchronous PPP */ +#define N_HCI 15 /* Bluetooth HCI UART */ + +#ifdef __KERNEL__ +#include <linux/module.h> + +/* + * c_cc characters in the termio structure. Oh, how I love being + * backwardly compatible. Notice that character 4 and 5 are + * interpreted differently depending on whether ICANON is set in + * c_lflag. If it's set, they are used as _VEOF and _VEOL, otherwise + * as _VMIN and V_TIME. This is for compatibility with OSF/1 (which + * is compatible with sysV)... + */ +#define _VMIN 4 +#define _VTIME 5 + + +/* intr=^C quit=^\ erase=del kill=^U + eof=^D eol=\0 eol2=\0 sxtc=\0 + start=^Q stop=^S susp=^Z dsusp=^Y + reprint=^R discard=^U werase=^W lnext=^V + vmin=\1 vtime=\0 +*/ +#define INIT_C_CC "\003\034\177\025\004\000\000\000\021\023\032\031\022\025\027\026\001" + +/* + * Translate a "termio" structure into a "termios". Ugh. + */ +#define user_termio_to_kernel_termios(termios, termio) \ +({ \ + unsigned short tmp; \ + get_user(tmp, &(termio)->c_iflag); \ + (termios)->c_iflag = (0xffff0000 & ((termios)->c_iflag)) | tmp; \ + get_user(tmp, &(termio)->c_oflag); \ + (termios)->c_oflag = (0xffff0000 & ((termios)->c_oflag)) | tmp; \ + get_user(tmp, &(termio)->c_cflag); \ + (termios)->c_cflag = (0xffff0000 & ((termios)->c_cflag)) | tmp; \ + get_user(tmp, &(termio)->c_lflag); \ + (termios)->c_lflag = (0xffff0000 & ((termios)->c_lflag)) | tmp; \ + copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ + 0; \ +}) + +/* + * Translate a "termios" structure into a "termio". Ugh. + * + * Note the "fun" _VMIN overloading. + */ +#define kernel_termios_to_user_termio(termio, termios) \ +({ \ + put_user((termios)->c_iflag, &(termio)->c_iflag); \ + put_user((termios)->c_oflag, &(termio)->c_oflag); \ + put_user((termios)->c_cflag, &(termio)->c_cflag); \ + put_user((termios)->c_lflag, &(termio)->c_lflag); \ + put_user((termios)->c_line, &(termio)->c_line); \ + copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ + if (!((termios)->c_lflag & ICANON)) { \ + put_user((termios)->c_cc[VMIN], &(termio)->c_cc[_VMIN]); \ + put_user((termios)->c_cc[VTIME], &(termio)->c_cc[_VTIME]); \ + } \ + 0; \ +}) + +#define user_termios_to_kernel_termios(k, u) \ +({ \ + get_user((k)->c_iflag, &(u)->c_iflag); \ + get_user((k)->c_oflag, &(u)->c_oflag); \ + get_user((k)->c_cflag, &(u)->c_cflag); \ + get_user((k)->c_lflag, &(u)->c_lflag); \ + get_user((k)->c_line, &(u)->c_line); \ + copy_from_user((k)->c_cc, (u)->c_cc, NCCS); \ + if((k)->c_lflag & ICANON) { \ + get_user((k)->c_cc[VEOF], &(u)->c_cc[VEOF]); \ + get_user((k)->c_cc[VEOL], &(u)->c_cc[VEOL]); \ + } else { \ + get_user((k)->c_cc[VMIN], &(u)->c_cc[_VMIN]); \ + get_user((k)->c_cc[VTIME], &(u)->c_cc[_VTIME]); \ + } \ + 0; \ +}) + +#define kernel_termios_to_user_termios(u, k) \ +({ \ + put_user((k)->c_iflag, &(u)->c_iflag); \ + put_user((k)->c_oflag, &(u)->c_oflag); \ + put_user((k)->c_cflag, &(u)->c_cflag); \ + put_user((k)->c_lflag, &(u)->c_lflag); \ + put_user((k)->c_line, &(u)->c_line); \ + copy_to_user((u)->c_cc, (k)->c_cc, NCCS); \ + if(!((k)->c_lflag & ICANON)) { \ + put_user((k)->c_cc[VMIN], &(u)->c_cc[_VMIN]); \ + put_user((k)->c_cc[VTIME], &(u)->c_cc[_VTIME]); \ + } else { \ + put_user((k)->c_cc[VEOF], &(u)->c_cc[VEOF]); \ + put_user((k)->c_cc[VEOL], &(u)->c_cc[VEOL]); \ + } \ + 0; \ +}) + +#endif /* __KERNEL__ */ + +#endif /* _SPARC_TERMIOS_H */ diff --git a/include/asm-sparc/thread_info.h b/include/asm-sparc/thread_info.h new file mode 100644 index 00000000000..104f03c5541 --- /dev/null +++ b/include/asm-sparc/thread_info.h @@ -0,0 +1,153 @@ +/* + * thread_info.h: sparc low-level thread information + * adapted from the ppc version by Pete Zaitcev, which was + * adapted from the i386 version by Paul Mackerras + * + * Copyright (C) 2002 David Howells (dhowells@redhat.com) + * Copyright (c) 2002 Pete Zaitcev (zaitcev@yahoo.com) + * - Incorporating suggestions made by Linus Torvalds and Dave Miller + */ + +#ifndef _ASM_THREAD_INFO_H +#define _ASM_THREAD_INFO_H + +#ifdef __KERNEL__ + +#ifndef __ASSEMBLY__ + +#include <asm/btfixup.h> +#include <asm/ptrace.h> +#include <asm/page.h> + +/* + * Low level task data. + * + * If you change this, change the TI_* offsets below to match. + */ +#define NSWINS 8 +struct thread_info { + unsigned long uwinmask; + struct task_struct *task; /* main task structure */ + struct exec_domain *exec_domain; /* execution domain */ + unsigned long flags; /* low level flags */ + + int cpu; /* cpu we're on */ + int preempt_count; + int softirq_count; + int hardirq_count; + + /* Context switch saved kernel state. */ + unsigned long ksp; /* ... ksp __attribute__ ((aligned (8))); */ + unsigned long kpc; + unsigned long kpsr; + unsigned long kwim; + + /* A place to store user windows and stack pointers + * when the stack needs inspection. + */ + struct reg_window reg_window[NSWINS]; /* align for ldd! */ + unsigned long rwbuf_stkptrs[NSWINS]; + unsigned long w_saved; + + struct restart_block restart_block; +}; + +/* + * macros/functions for gaining access to the thread information structure + * + * preempt_count needs to be 1 initially, until the scheduler is functional. + */ +#define INIT_THREAD_INFO(tsk) \ +{ \ + .uwinmask = 0, \ + .task = &tsk, \ + .exec_domain = &default_exec_domain, \ + .flags = 0, \ + .cpu = 0, \ + .preempt_count = 1, \ + .restart_block = { \ + .fn = do_no_restart_syscall, \ + }, \ +} + +#define init_thread_info (init_thread_union.thread_info) +#define init_stack (init_thread_union.stack) + +/* how to get the thread information struct from C */ +register struct thread_info *current_thread_info_reg asm("g6"); +#define current_thread_info() (current_thread_info_reg) + +/* + * thread information allocation + */ +#if PAGE_SHIFT == 13 +#define THREAD_INFO_ORDER 0 +#else /* PAGE_SHIFT */ +#define THREAD_INFO_ORDER 1 +#endif + +BTFIXUPDEF_CALL(struct thread_info *, alloc_thread_info, void) +#define alloc_thread_info(tsk) BTFIXUP_CALL(alloc_thread_info)() + +BTFIXUPDEF_CALL(void, free_thread_info, struct thread_info *) +#define free_thread_info(ti) BTFIXUP_CALL(free_thread_info)(ti) + +#define get_thread_info(ti) get_task_struct((ti)->task) +#define put_thread_info(ti) put_task_struct((ti)->task) + +#endif /* __ASSEMBLY__ */ + +/* + * Size of kernel stack for each process. + * Observe the order of get_free_pages() in alloc_thread_info(). + * The sun4 has 8K stack too, because it's short on memory, and 16K is a waste. + */ +#define THREAD_SIZE 8192 + +/* + * Offsets in thread_info structure, used in assembly code + * The "#define REGWIN_SZ 0x40" was abolished, so no multiplications. + */ +#define TI_UWINMASK 0x00 /* uwinmask */ +#define TI_TASK 0x04 +#define TI_EXECDOMAIN 0x08 /* exec_domain */ +#define TI_FLAGS 0x0c +#define TI_CPU 0x10 +#define TI_PREEMPT 0x14 /* preempt_count */ +#define TI_SOFTIRQ 0x18 /* softirq_count */ +#define TI_HARDIRQ 0x1c /* hardirq_count */ +#define TI_KSP 0x20 /* ksp */ +#define TI_KPC 0x24 /* kpc (ldd'ed with kpc) */ +#define TI_KPSR 0x28 /* kpsr */ +#define TI_KWIM 0x2c /* kwim (ldd'ed with kpsr) */ +#define TI_REG_WINDOW 0x30 +#define TI_RWIN_SPTRS 0x230 +#define TI_W_SAVED 0x250 +/* #define TI_RESTART_BLOCK 0x25n */ /* Nobody cares */ + +#define PREEMPT_ACTIVE 0x4000000 + +/* + * thread information flag bit numbers + */ +#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ +#define TIF_NOTIFY_RESUME 1 /* resumption notification requested */ +#define TIF_SIGPENDING 2 /* signal pending */ +#define TIF_NEED_RESCHED 3 /* rescheduling necessary */ +#define TIF_USEDFPU 8 /* FPU was used by this task + * this quantum (SMP) */ +#define TIF_POLLING_NRFLAG 9 /* true if poll_idle() is polling + * TIF_NEED_RESCHED */ +#define TIF_MEMDIE 10 + +/* as above, but as bit values */ +#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE) +#define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME) +#define _TIF_SIGPENDING (1<<TIF_SIGPENDING) +#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED) +#define _TIF_USEDFPU (1<<TIF_USEDFPU) +#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG) + +#endif /* __KERNEL__ */ + +#endif /* _ASM_THREAD_INFO_H */ diff --git a/include/asm-sparc/timer.h b/include/asm-sparc/timer.h new file mode 100644 index 00000000000..b16eb739ddd --- /dev/null +++ b/include/asm-sparc/timer.h @@ -0,0 +1,110 @@ +/* $Id: timer.h,v 1.21 1999/04/20 13:22:51 anton Exp $ + * timer.h: Definitions for the timer chips on the Sparc. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + +#include <linux/config.h> + +#ifndef _SPARC_TIMER_H +#define _SPARC_TIMER_H + +#include <asm/system.h> /* For SUN4M_NCPUS */ +#include <asm/sun4paddr.h> +#include <asm/btfixup.h> + +/* Timer structures. The interrupt timer has two properties which + * are the counter (which is handled in do_timer in sched.c) and the limit. + * This limit is where the timer's counter 'wraps' around. Oddly enough, + * the sun4c timer when it hits the limit wraps back to 1 and not zero + * thus when calculating the value at which it will fire a microsecond you + * must adjust by one. Thanks SUN for designing such great hardware ;( + */ + +/* Note that I am only going to use the timer that interrupts at + * Sparc IRQ 10. There is another one available that can fire at + * IRQ 14. Currently it is left untouched, we keep the PROM's limit + * register value and let the prom take these interrupts. This allows + * L1-A to work. + */ + +struct sun4c_timer_info { + __volatile__ unsigned int cur_count10; + __volatile__ unsigned int timer_limit10; + __volatile__ unsigned int cur_count14; + __volatile__ unsigned int timer_limit14; +}; + +#define SUN4C_TIMER_PHYSADDR 0xf3000000 +#ifdef CONFIG_SUN4 +#define SUN_TIMER_PHYSADDR SUN4_300_TIMER_PHYSADDR +#else +#define SUN_TIMER_PHYSADDR SUN4C_TIMER_PHYSADDR +#endif + +/* A sun4m has two blocks of registers which are probably of the same + * structure. LSI Logic's L64851 is told to _decrement_ from the limit + * value. Aurora behaves similarly but its limit value is compacted in + * other fashion (it's wider). Documented fields are defined here. + */ + +/* As with the interrupt register, we have two classes of timer registers + * which are per-cpu and master. Per-cpu timers only hit that cpu and are + * only level 14 ticks, master timer hits all cpus and is level 10. + */ + +#define SUN4M_PRM_CNT_L 0x80000000 +#define SUN4M_PRM_CNT_LVALUE 0x7FFFFC00 + +struct sun4m_timer_percpu_info { + __volatile__ unsigned int l14_timer_limit; /* Initial value is 0x009c4000 */ + __volatile__ unsigned int l14_cur_count; + + /* This register appears to be write only and/or inaccessible + * on Uni-Processor sun4m machines. + */ + __volatile__ unsigned int l14_limit_noclear; /* Data access error is here */ + + __volatile__ unsigned int cntrl; /* =1 after POST on Aurora */ + __volatile__ unsigned char space[PAGE_SIZE - 16]; +}; + +struct sun4m_timer_regs { + struct sun4m_timer_percpu_info cpu_timers[SUN4M_NCPUS]; + volatile unsigned int l10_timer_limit; + volatile unsigned int l10_cur_count; + + /* Again, this appears to be write only and/or inaccessible + * on uni-processor sun4m machines. + */ + volatile unsigned int l10_limit_noclear; + + /* This register too, it must be magic. */ + volatile unsigned int foobar; + + volatile unsigned int cfg; /* equals zero at boot time... */ +}; + +extern struct sun4m_timer_regs *sun4m_timers; + +#define SUN4D_PRM_CNT_L 0x80000000 +#define SUN4D_PRM_CNT_LVALUE 0x7FFFFC00 + +struct sun4d_timer_regs { + volatile unsigned int l10_timer_limit; + volatile unsigned int l10_cur_countx; + volatile unsigned int l10_limit_noclear; + volatile unsigned int ctrl; + volatile unsigned int l10_cur_count; +}; + +extern struct sun4d_timer_regs *sun4d_timers; + +extern __volatile__ unsigned int *master_l10_counter; +extern __volatile__ unsigned int *master_l10_limit; + +/* FIXME: Make do_[gs]ettimeofday btfixup calls */ +BTFIXUPDEF_CALL(int, bus_do_settimeofday, struct timespec *tv) +#define bus_do_settimeofday(tv) BTFIXUP_CALL(bus_do_settimeofday)(tv) + +#endif /* !(_SPARC_TIMER_H) */ diff --git a/include/asm-sparc/timex.h b/include/asm-sparc/timex.h new file mode 100644 index 00000000000..71b45c90cca --- /dev/null +++ b/include/asm-sparc/timex.h @@ -0,0 +1,15 @@ +/* + * linux/include/asm-sparc/timex.h + * + * sparc architecture timex specifications + */ +#ifndef _ASMsparc_TIMEX_H +#define _ASMsparc_TIMEX_H + +#define CLOCK_TICK_RATE 1193180 /* Underlying HZ */ + +/* XXX Maybe do something better at some point... -DaveM */ +typedef unsigned long cycles_t; +#define get_cycles() (0) + +#endif diff --git a/include/asm-sparc/tlb.h b/include/asm-sparc/tlb.h new file mode 100644 index 00000000000..6d02d1ce53f --- /dev/null +++ b/include/asm-sparc/tlb.h @@ -0,0 +1,24 @@ +#ifndef _SPARC_TLB_H +#define _SPARC_TLB_H + +#define tlb_start_vma(tlb, vma) \ +do { \ + flush_cache_range(vma, vma->vm_start, vma->vm_end); \ +} while (0) + +#define tlb_end_vma(tlb, vma) \ +do { \ + flush_tlb_range(vma, vma->vm_start, vma->vm_end); \ +} while (0) + +#define __tlb_remove_tlb_entry(tlb, pte, address) \ + do { } while (0) + +#define tlb_flush(tlb) \ +do { \ + flush_tlb_mm((tlb)->mm); \ +} while (0) + +#include <asm-generic/tlb.h> + +#endif /* _SPARC_TLB_H */ diff --git a/include/asm-sparc/tlbflush.h b/include/asm-sparc/tlbflush.h new file mode 100644 index 00000000000..5643ca31ead --- /dev/null +++ b/include/asm-sparc/tlbflush.h @@ -0,0 +1,63 @@ +#ifndef _SPARC_TLBFLUSH_H +#define _SPARC_TLBFLUSH_H + +#include <linux/config.h> +#include <linux/mm.h> +// #include <asm/processor.h> + +/* + * TLB flushing: + * + * - flush_tlb() flushes the current mm struct TLBs XXX Exists? + * - flush_tlb_all() flushes all processes TLBs + * - flush_tlb_mm(mm) flushes the specified mm context TLB's + * - flush_tlb_page(vma, vmaddr) flushes one page + * - flush_tlb_range(vma, start, end) flushes a range of pages + * - flush_tlb_kernel_range(start, end) flushes a range of kernel pages + * - flush_tlb_pgtables(mm, start, end) flushes a range of page tables + */ + +#ifdef CONFIG_SMP + +BTFIXUPDEF_CALL(void, local_flush_tlb_all, void) +BTFIXUPDEF_CALL(void, local_flush_tlb_mm, struct mm_struct *) +BTFIXUPDEF_CALL(void, local_flush_tlb_range, struct vm_area_struct *, unsigned long, unsigned long) +BTFIXUPDEF_CALL(void, local_flush_tlb_page, struct vm_area_struct *, unsigned long) + +#define local_flush_tlb_all() BTFIXUP_CALL(local_flush_tlb_all)() +#define local_flush_tlb_mm(mm) BTFIXUP_CALL(local_flush_tlb_mm)(mm) +#define local_flush_tlb_range(vma,start,end) BTFIXUP_CALL(local_flush_tlb_range)(vma,start,end) +#define local_flush_tlb_page(vma,addr) BTFIXUP_CALL(local_flush_tlb_page)(vma,addr) + +extern void smp_flush_tlb_all(void); +extern void smp_flush_tlb_mm(struct mm_struct *mm); +extern void smp_flush_tlb_range(struct vm_area_struct *vma, + unsigned long start, + unsigned long end); +extern void smp_flush_tlb_page(struct vm_area_struct *mm, unsigned long page); + +#endif /* CONFIG_SMP */ + +BTFIXUPDEF_CALL(void, flush_tlb_all, void) +BTFIXUPDEF_CALL(void, flush_tlb_mm, struct mm_struct *) +BTFIXUPDEF_CALL(void, flush_tlb_range, struct vm_area_struct *, unsigned long, unsigned long) +BTFIXUPDEF_CALL(void, flush_tlb_page, struct vm_area_struct *, unsigned long) + +// Thanks to Anton Blanchard, our pagetables became uncached in 2.4. Wee! +// extern void flush_tlb_pgtables(struct mm_struct *mm, +// unsigned long start, unsigned long end); +#define flush_tlb_pgtables(mm, start, end) do{ }while(0) + +#define flush_tlb_all() BTFIXUP_CALL(flush_tlb_all)() +#define flush_tlb_mm(mm) BTFIXUP_CALL(flush_tlb_mm)(mm) +#define flush_tlb_range(vma,start,end) BTFIXUP_CALL(flush_tlb_range)(vma,start,end) +#define flush_tlb_page(vma,addr) BTFIXUP_CALL(flush_tlb_page)(vma,addr) + +// #define flush_tlb() flush_tlb_mm(current->active_mm) /* XXX Sure? */ + +/* + * This is a kludge, until I know better. --zaitcev XXX + */ +#define flush_tlb_kernel_range(start, end) flush_tlb_all() + +#endif /* _SPARC_TLBFLUSH_H */ diff --git a/include/asm-sparc/topology.h b/include/asm-sparc/topology.h new file mode 100644 index 00000000000..ee5ac9c9da2 --- /dev/null +++ b/include/asm-sparc/topology.h @@ -0,0 +1,6 @@ +#ifndef _ASM_SPARC_TOPOLOGY_H +#define _ASM_SPARC_TOPOLOGY_H + +#include <asm-generic/topology.h> + +#endif /* _ASM_SPARC_TOPOLOGY_H */ diff --git a/include/asm-sparc/traps.h b/include/asm-sparc/traps.h new file mode 100644 index 00000000000..6690ab956ea --- /dev/null +++ b/include/asm-sparc/traps.h @@ -0,0 +1,140 @@ +/* $Id: traps.h,v 1.9 1998/03/09 14:04:53 jj Exp $ + * traps.h: Format of entries for the Sparc trap table. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef _SPARC_TRAPS_H +#define _SPARC_TRAPS_H + +#define NUM_SPARC_TRAPS 255 + +#ifndef __ASSEMBLY__ + +/* This is for V8 compliant Sparc CPUS */ +struct tt_entry { + unsigned long inst_one; + unsigned long inst_two; + unsigned long inst_three; + unsigned long inst_four; +}; + +/* We set this to _start in system setup. */ +extern struct tt_entry *sparc_ttable; + +extern __inline__ unsigned long get_tbr(void) +{ + unsigned long tbr; + + __asm__ __volatile__("rd %%tbr, %0\n\t" : "=r" (tbr)); + return tbr; +} + +#endif /* !(__ASSEMBLY__) */ + +/* For patching the trap table at boot time, we need to know how to + * form various common Sparc instructions. Thus these macros... + */ + +#define SPARC_MOV_CONST_L3(const) (0xa6102000 | (const&0xfff)) + +/* The following assumes that the branch lies before the place we + * are branching to. This is the case for a trap vector... + * You have been warned. + */ +#define SPARC_BRANCH(dest_addr, inst_addr) \ + (0x10800000 | (((dest_addr-inst_addr)>>2)&0x3fffff)) + +#define SPARC_RD_PSR_L0 (0xa1480000) +#define SPARC_RD_WIM_L3 (0xa7500000) +#define SPARC_NOP (0x01000000) + +/* Various interesting trap levels. */ +/* First, hardware traps. */ +#define SP_TRAP_TFLT 0x1 /* Text fault */ +#define SP_TRAP_II 0x2 /* Illegal Instruction */ +#define SP_TRAP_PI 0x3 /* Privileged Instruction */ +#define SP_TRAP_FPD 0x4 /* Floating Point Disabled */ +#define SP_TRAP_WOVF 0x5 /* Window Overflow */ +#define SP_TRAP_WUNF 0x6 /* Window Underflow */ +#define SP_TRAP_MNA 0x7 /* Memory Address Unaligned */ +#define SP_TRAP_FPE 0x8 /* Floating Point Exception */ +#define SP_TRAP_DFLT 0x9 /* Data Fault */ +#define SP_TRAP_TOF 0xa /* Tag Overflow */ +#define SP_TRAP_WDOG 0xb /* Watchpoint Detected */ +#define SP_TRAP_IRQ1 0x11 /* IRQ level 1 */ +#define SP_TRAP_IRQ2 0x12 /* IRQ level 2 */ +#define SP_TRAP_IRQ3 0x13 /* IRQ level 3 */ +#define SP_TRAP_IRQ4 0x14 /* IRQ level 4 */ +#define SP_TRAP_IRQ5 0x15 /* IRQ level 5 */ +#define SP_TRAP_IRQ6 0x16 /* IRQ level 6 */ +#define SP_TRAP_IRQ7 0x17 /* IRQ level 7 */ +#define SP_TRAP_IRQ8 0x18 /* IRQ level 8 */ +#define SP_TRAP_IRQ9 0x19 /* IRQ level 9 */ +#define SP_TRAP_IRQ10 0x1a /* IRQ level 10 */ +#define SP_TRAP_IRQ11 0x1b /* IRQ level 11 */ +#define SP_TRAP_IRQ12 0x1c /* IRQ level 12 */ +#define SP_TRAP_IRQ13 0x1d /* IRQ level 13 */ +#define SP_TRAP_IRQ14 0x1e /* IRQ level 14 */ +#define SP_TRAP_IRQ15 0x1f /* IRQ level 15 Non-maskable */ +#define SP_TRAP_RACC 0x20 /* Register Access Error ??? */ +#define SP_TRAP_IACC 0x21 /* Instruction Access Error */ +#define SP_TRAP_CPDIS 0x24 /* Co-Processor Disabled */ +#define SP_TRAP_BADFL 0x25 /* Unimplemented Flush Instruction */ +#define SP_TRAP_CPEXP 0x28 /* Co-Processor Exception */ +#define SP_TRAP_DACC 0x29 /* Data Access Error */ +#define SP_TRAP_DIVZ 0x2a /* Divide By Zero */ +#define SP_TRAP_DSTORE 0x2b /* Data Store Error ??? */ +#define SP_TRAP_DMM 0x2c /* Data Access MMU Miss ??? */ +#define SP_TRAP_IMM 0x3c /* Instruction Access MMU Miss ??? */ + +/* Now the Software Traps... */ +#define SP_TRAP_SUNOS 0x80 /* SunOS System Call */ +#define SP_TRAP_SBPT 0x81 /* Software Breakpoint */ +#define SP_TRAP_SDIVZ 0x82 /* Software Divide-by-Zero trap */ +#define SP_TRAP_FWIN 0x83 /* Flush Windows */ +#define SP_TRAP_CWIN 0x84 /* Clean Windows */ +#define SP_TRAP_RCHK 0x85 /* Range Check */ +#define SP_TRAP_FUNA 0x86 /* Fix Unaligned Access */ +#define SP_TRAP_IOWFL 0x87 /* Integer Overflow */ +#define SP_TRAP_SOLARIS 0x88 /* Solaris System Call */ +#define SP_TRAP_NETBSD 0x89 /* NetBSD System Call */ +#define SP_TRAP_LINUX 0x90 /* Linux System Call */ + +/* Names used for compatibility with SunOS */ +#define ST_SYSCALL 0x00 +#define ST_BREAKPOINT 0x01 +#define ST_DIV0 0x02 +#define ST_FLUSH_WINDOWS 0x03 +#define ST_CLEAN_WINDOWS 0x04 +#define ST_RANGE_CHECK 0x05 +#define ST_FIX_ALIGN 0x06 +#define ST_INT_OVERFLOW 0x07 + +/* Special traps... */ +#define SP_TRAP_KBPT1 0xfe /* KADB/PROM Breakpoint one */ +#define SP_TRAP_KBPT2 0xff /* KADB/PROM Breakpoint two */ + +/* Handy Macros */ +/* Is this a trap we never expect to get? */ +#define BAD_TRAP_P(level) \ + ((level > SP_TRAP_WDOG && level < SP_TRAP_IRQ1) || \ + (level > SP_TRAP_IACC && level < SP_TRAP_CPDIS) || \ + (level > SP_TRAP_BADFL && level < SP_TRAP_CPEXP) || \ + (level > SP_TRAP_DMM && level < SP_TRAP_IMM) || \ + (level > SP_TRAP_IMM && level < SP_TRAP_SUNOS) || \ + (level > SP_TRAP_LINUX && level < SP_TRAP_KBPT1)) + +/* Is this a Hardware trap? */ +#define HW_TRAP_P(level) ((level > 0) && (level < SP_TRAP_SUNOS)) + +/* Is this a Software trap? */ +#define SW_TRAP_P(level) ((level >= SP_TRAP_SUNOS) && (level <= SP_TRAP_KBPT2)) + +/* Is this a system call for some OS we know about? */ +#define SCALL_TRAP_P(level) ((level == SP_TRAP_SUNOS) || \ + (level == SP_TRAP_SOLARIS) || \ + (level == SP_TRAP_NETBSD) || \ + (level == SP_TRAP_LINUX)) + +#endif /* !(_SPARC_TRAPS_H) */ diff --git a/include/asm-sparc/tsunami.h b/include/asm-sparc/tsunami.h new file mode 100644 index 00000000000..887add5c466 --- /dev/null +++ b/include/asm-sparc/tsunami.h @@ -0,0 +1,64 @@ +/* $Id: tsunami.h,v 1.5 1996/08/29 09:49:03 davem Exp $ + * tsunami.h: Module specific definitions for Tsunami V8 Sparcs + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef _SPARC_TSUNAMI_H +#define _SPARC_TSUNAMI_H + +#include <asm/asi.h> + +/* The MMU control register on the Tsunami: + * + * ----------------------------------------------------------------------- + * | implvers |SW|AV|DV|MV| RSV |PC|ITD|ALC| RSV |PE| RC |IE|DE|RSV|NF|ME| + * ----------------------------------------------------------------------- + * 31 24 23 22 21 20 19-18 17 16 14 13-12 11 10-9 8 7 6-2 1 0 + * + * SW: Enable Software Table Walks 0=off 1=on + * AV: Address View bit + * DV: Data View bit + * MV: Memory View bit + * PC: Parity Control + * ITD: ITBR disable + * ALC: Alternate Cacheable + * PE: Parity Enable 0=off 1=on + * RC: Refresh Control + * IE: Instruction cache Enable 0=off 1=on + * DE: Data cache Enable 0=off 1=on + * NF: No Fault, same as all other SRMMUs + * ME: MMU Enable, same as all other SRMMUs + */ + +#define TSUNAMI_SW 0x00800000 +#define TSUNAMI_AV 0x00400000 +#define TSUNAMI_DV 0x00200000 +#define TSUNAMI_MV 0x00100000 +#define TSUNAMI_PC 0x00020000 +#define TSUNAMI_ITD 0x00010000 +#define TSUNAMI_ALC 0x00008000 +#define TSUNAMI_PE 0x00001000 +#define TSUNAMI_RCMASK 0x00000C00 +#define TSUNAMI_IENAB 0x00000200 +#define TSUNAMI_DENAB 0x00000100 +#define TSUNAMI_NF 0x00000002 +#define TSUNAMI_ME 0x00000001 + +static inline void tsunami_flush_icache(void) +{ + __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t" + : /* no outputs */ + : "i" (ASI_M_IC_FLCLEAR) + : "memory"); +} + +static inline void tsunami_flush_dcache(void) +{ + __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t" + : /* no outputs */ + : "i" (ASI_M_DC_FLCLEAR) + : "memory"); +} + +#endif /* !(_SPARC_TSUNAMI_H) */ diff --git a/include/asm-sparc/turbosparc.h b/include/asm-sparc/turbosparc.h new file mode 100644 index 00000000000..31d2350a581 --- /dev/null +++ b/include/asm-sparc/turbosparc.h @@ -0,0 +1,125 @@ +/* $Id: turbosparc.h,v 1.4 1998/08/16 16:02:42 ecd Exp $ + * turbosparc.h: Defines specific to the TurboSparc module. + * This is SRMMU stuff. + * + * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz) + */ +#ifndef _SPARC_TURBOSPARC_H +#define _SPARC_TURBOSPARC_H + +#include <asm/asi.h> +#include <asm/pgtsrmmu.h> + +/* Bits in the SRMMU control register for TurboSparc modules. + * + * ------------------------------------------------------------------- + * |impl-vers| RSV| PMC |PE|PC| RSV |BM| RFR |IC|DC|PSO|RSV|ICS|NF|ME| + * ------------------------------------------------------------------- + * 31 24 23-21 20-19 18 17 16-15 14 13-10 9 8 7 6-3 2 1 0 + * + * BM: Boot Mode -- 0 = not in boot mode, 1 = in boot mode + * + * This indicates whether the TurboSparc is in boot-mode or not. + * + * IC: Instruction Cache -- 0 = off, 1 = on + * DC: Data Cache -- 0 = off, 1 = 0n + * + * These bits enable the on-cpu TurboSparc split I/D caches. + * + * ICS: ICache Snooping -- 0 = disable, 1 = enable snooping of icache + * NF: No Fault -- 0 = faults generate traps, 1 = faults don't trap + * ME: MMU enable -- 0 = mmu not translating, 1 = mmu translating + * + */ + +#define TURBOSPARC_MMUENABLE 0x00000001 +#define TURBOSPARC_NOFAULT 0x00000002 +#define TURBOSPARC_ICSNOOP 0x00000004 +#define TURBOSPARC_PSO 0x00000080 +#define TURBOSPARC_DCENABLE 0x00000100 /* Enable data cache */ +#define TURBOSPARC_ICENABLE 0x00000200 /* Enable instruction cache */ +#define TURBOSPARC_BMODE 0x00004000 +#define TURBOSPARC_PARITYODD 0x00020000 /* Parity odd, if enabled */ +#define TURBOSPARC_PCENABLE 0x00040000 /* Enable parity checking */ + +/* Bits in the CPU configuration register for TurboSparc modules. + * + * ------------------------------------------------------- + * |IOClk|SNP|AXClk| RAH | WS | RSV |SBC|WT|uS2|SE|SCC| + * ------------------------------------------------------- + * 31 30 29-28 27-26 25-23 22-8 7-6 5 4 3 2-0 + * + */ + +#define TURBOSPARC_SCENABLE 0x00000008 /* Secondary cache enable */ +#define TURBOSPARC_uS2 0x00000010 /* Swift compatibility mode */ +#define TURBOSPARC_WTENABLE 0x00000020 /* Write thru for dcache */ +#define TURBOSPARC_SNENABLE 0x40000000 /* DVMA snoop enable */ + +#ifndef __ASSEMBLY__ + +/* Bits [13:5] select one of 512 instruction cache tags */ +static inline void turbosparc_inv_insn_tag(unsigned long addr) +{ + __asm__ __volatile__("sta %%g0, [%0] %1\n\t" + : /* no outputs */ + : "r" (addr), "i" (ASI_M_TXTC_TAG) + : "memory"); +} + +/* Bits [13:5] select one of 512 data cache tags */ +static inline void turbosparc_inv_data_tag(unsigned long addr) +{ + __asm__ __volatile__("sta %%g0, [%0] %1\n\t" + : /* no outputs */ + : "r" (addr), "i" (ASI_M_DATAC_TAG) + : "memory"); +} + +static inline void turbosparc_flush_icache(void) +{ + unsigned long addr; + + for (addr = 0; addr < 0x4000; addr += 0x20) + turbosparc_inv_insn_tag(addr); +} + +static inline void turbosparc_flush_dcache(void) +{ + unsigned long addr; + + for (addr = 0; addr < 0x4000; addr += 0x20) + turbosparc_inv_data_tag(addr); +} + +static inline void turbosparc_idflash_clear(void) +{ + unsigned long addr; + + for (addr = 0; addr < 0x4000; addr += 0x20) { + turbosparc_inv_insn_tag(addr); + turbosparc_inv_data_tag(addr); + } +} + +static inline void turbosparc_set_ccreg(unsigned long regval) +{ + __asm__ __volatile__("sta %0, [%1] %2\n\t" + : /* no outputs */ + : "r" (regval), "r" (0x600), "i" (ASI_M_MMUREGS) + : "memory"); +} + +static inline unsigned long turbosparc_get_ccreg(void) +{ + unsigned long regval; + + __asm__ __volatile__("lda [%1] %2, %0\n\t" + : "=r" (regval) + : "r" (0x600), "i" (ASI_M_MMUREGS)); + return regval; +} + +#endif /* !__ASSEMBLY__ */ + +#endif /* !(_SPARC_TURBOSPARC_H) */ diff --git a/include/asm-sparc/types.h b/include/asm-sparc/types.h new file mode 100644 index 00000000000..9eabf6e61cc --- /dev/null +++ b/include/asm-sparc/types.h @@ -0,0 +1,63 @@ +/* $Id: types.h,v 1.13 2001/12/21 01:22:59 davem Exp $ */ +#ifndef _SPARC_TYPES_H +#define _SPARC_TYPES_H + +/* + * _xx is ok: it doesn't pollute the POSIX namespace. Use these in the + * header files exported to user space. + */ + +/* + * This file is never included by application software unless + * explicitly requested (e.g., via linux/types.h) in which case the + * application is Linux specific so (user-) name space pollution is + * not a major issue. However, for interoperability, libraries still + * need to be careful to avoid a name clashes. + */ + +#ifndef __ASSEMBLY__ + +typedef unsigned short umode_t; + +typedef __signed__ char __s8; +typedef unsigned char __u8; + +typedef __signed__ short __s16; +typedef unsigned short __u16; + +typedef __signed__ int __s32; +typedef unsigned int __u32; + +typedef __signed__ long long __s64; +typedef unsigned long long __u64; + +#endif /* __ASSEMBLY__ */ + +#ifdef __KERNEL__ + +#define BITS_PER_LONG 32 + +#ifndef __ASSEMBLY__ + +typedef __signed__ char s8; +typedef unsigned char u8; + +typedef __signed__ short s16; +typedef unsigned short u16; + +typedef __signed__ int s32; +typedef unsigned int u32; + +typedef __signed__ long long s64; +typedef unsigned long long u64; + +typedef u32 dma_addr_t; +typedef u32 dma64_addr_t; + +typedef unsigned short kmem_bufctl_t; + +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + +#endif /* defined(_SPARC_TYPES_H) */ diff --git a/include/asm-sparc/uaccess.h b/include/asm-sparc/uaccess.h new file mode 100644 index 00000000000..3f47889883b --- /dev/null +++ b/include/asm-sparc/uaccess.h @@ -0,0 +1,389 @@ +/* $Id: uaccess.h,v 1.24 2001/10/30 04:32:24 davem Exp $ + * uaccess.h: User space memore access functions. + * + * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu) + * Copyright (C) 1996,1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz) + */ +#ifndef _ASM_UACCESS_H +#define _ASM_UACCESS_H + +#ifdef __KERNEL__ +#include <linux/compiler.h> +#include <linux/sched.h> +#include <linux/string.h> +#include <linux/errno.h> +#include <asm/vac-ops.h> +#include <asm/a.out.h> +#endif + +#ifndef __ASSEMBLY__ + +/* Sparc is not segmented, however we need to be able to fool verify_area() + * when doing system calls from kernel mode legitimately. + * + * "For historical reasons, these macros are grossly misnamed." -Linus + */ + +#define KERNEL_DS ((mm_segment_t) { 0 }) +#define USER_DS ((mm_segment_t) { -1 }) + +#define VERIFY_READ 0 +#define VERIFY_WRITE 1 + +#define get_ds() (KERNEL_DS) +#define get_fs() (current->thread.current_ds) +#define set_fs(val) ((current->thread.current_ds) = (val)) + +#define segment_eq(a,b) ((a).seg == (b).seg) + +/* We have there a nice not-mapped page at PAGE_OFFSET - PAGE_SIZE, so that this test + * can be fairly lightweight. + * No one can read/write anything from userland in the kernel space by setting + * large size and address near to PAGE_OFFSET - a fault will break his intentions. + */ +#define __user_ok(addr,size) ((addr) < STACK_TOP) +#define __kernel_ok (segment_eq(get_fs(), KERNEL_DS)) +#define __access_ok(addr,size) (__user_ok((addr) & get_fs().seg,(size))) +#define access_ok(type,addr,size) __access_ok((unsigned long)(addr),(size)) + +/* this function will go away soon - use access_ok() instead */ +static inline int __deprecated verify_area(int type, const void __user * addr, unsigned long size) +{ + return access_ok(type,addr,size) ? 0 : -EFAULT; +} + +/* + * The exception table consists of pairs of addresses: the first is the + * address of an instruction that is allowed to fault, and the second is + * the address at which the program should continue. No registers are + * modified, so it is entirely up to the continuation code to figure out + * what to do. + * + * All the routines below use bits of fixup code that are out of line + * with the main instruction path. This means when everything is well, + * we don't even have to jump over them. Further, they do not intrude + * on our cache or tlb entries. + * + * There is a special way how to put a range of potentially faulting + * insns (like twenty ldd/std's with now intervening other instructions) + * You specify address of first in insn and 0 in fixup and in the next + * exception_table_entry you specify last potentially faulting insn + 1 + * and in fixup the routine which should handle the fault. + * That fixup code will get + * (faulting_insn_address - first_insn_in_the_range_address)/4 + * in %g2 (ie. index of the faulting instruction in the range). + */ + +struct exception_table_entry +{ + unsigned long insn, fixup; +}; + +/* Returns 0 if exception not found and fixup otherwise. */ +extern unsigned long search_extables_range(unsigned long addr, unsigned long *g2); + +extern void __ret_efault(void); + +/* Uh, these should become the main single-value transfer routines.. + * They automatically use the right size if we just have the right + * pointer type.. + * + * This gets kind of ugly. We want to return _two_ values in "get_user()" + * and yet we don't want to do any pointers, because that is too much + * of a performance impact. Thus we have a few rather ugly macros here, + * and hide all the ugliness from the user. + */ +#define put_user(x,ptr) ({ \ +unsigned long __pu_addr = (unsigned long)(ptr); \ +__chk_user_ptr(ptr); \ +__put_user_check((__typeof__(*(ptr)))(x),__pu_addr,sizeof(*(ptr))); }) + +#define get_user(x,ptr) ({ \ +unsigned long __gu_addr = (unsigned long)(ptr); \ +__chk_user_ptr(ptr); \ +__get_user_check((x),__gu_addr,sizeof(*(ptr)),__typeof__(*(ptr))); }) + +/* + * The "__xxx" versions do not do address space checking, useful when + * doing multiple accesses to the same area (the user has to do the + * checks by hand with "access_ok()") + */ +#define __put_user(x,ptr) __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr))) +#define __get_user(x,ptr) __get_user_nocheck((x),(ptr),sizeof(*(ptr)),__typeof__(*(ptr))) + +struct __large_struct { unsigned long buf[100]; }; +#define __m(x) ((struct __large_struct __user *)(x)) + +#define __put_user_check(x,addr,size) ({ \ +register int __pu_ret; \ +if (__access_ok(addr,size)) { \ +switch (size) { \ +case 1: __put_user_asm(x,b,addr,__pu_ret); break; \ +case 2: __put_user_asm(x,h,addr,__pu_ret); break; \ +case 4: __put_user_asm(x,,addr,__pu_ret); break; \ +case 8: __put_user_asm(x,d,addr,__pu_ret); break; \ +default: __pu_ret = __put_user_bad(); break; \ +} } else { __pu_ret = -EFAULT; } __pu_ret; }) + +#define __put_user_check_ret(x,addr,size,retval) ({ \ +register int __foo __asm__ ("l1"); \ +if (__access_ok(addr,size)) { \ +switch (size) { \ +case 1: __put_user_asm_ret(x,b,addr,retval,__foo); break; \ +case 2: __put_user_asm_ret(x,h,addr,retval,__foo); break; \ +case 4: __put_user_asm_ret(x,,addr,retval,__foo); break; \ +case 8: __put_user_asm_ret(x,d,addr,retval,__foo); break; \ +default: if (__put_user_bad()) return retval; break; \ +} } else return retval; }) + +#define __put_user_nocheck(x,addr,size) ({ \ +register int __pu_ret; \ +switch (size) { \ +case 1: __put_user_asm(x,b,addr,__pu_ret); break; \ +case 2: __put_user_asm(x,h,addr,__pu_ret); break; \ +case 4: __put_user_asm(x,,addr,__pu_ret); break; \ +case 8: __put_user_asm(x,d,addr,__pu_ret); break; \ +default: __pu_ret = __put_user_bad(); break; \ +} __pu_ret; }) + +#define __put_user_nocheck_ret(x,addr,size,retval) ({ \ +register int __foo __asm__ ("l1"); \ +switch (size) { \ +case 1: __put_user_asm_ret(x,b,addr,retval,__foo); break; \ +case 2: __put_user_asm_ret(x,h,addr,retval,__foo); break; \ +case 4: __put_user_asm_ret(x,,addr,retval,__foo); break; \ +case 8: __put_user_asm_ret(x,d,addr,retval,__foo); break; \ +default: if (__put_user_bad()) return retval; break; \ +} }) + +#define __put_user_asm(x,size,addr,ret) \ +__asm__ __volatile__( \ + "/* Put user asm, inline. */\n" \ +"1:\t" "st"#size " %1, %2\n\t" \ + "clr %0\n" \ +"2:\n\n\t" \ + ".section .fixup,#alloc,#execinstr\n\t" \ + ".align 4\n" \ +"3:\n\t" \ + "b 2b\n\t" \ + " mov %3, %0\n\t" \ + ".previous\n\n\t" \ + ".section __ex_table,#alloc\n\t" \ + ".align 4\n\t" \ + ".word 1b, 3b\n\t" \ + ".previous\n\n\t" \ + : "=&r" (ret) : "r" (x), "m" (*__m(addr)), \ + "i" (-EFAULT)) + +#define __put_user_asm_ret(x,size,addr,ret,foo) \ +if (__builtin_constant_p(ret) && ret == -EFAULT) \ +__asm__ __volatile__( \ + "/* Put user asm ret, inline. */\n" \ +"1:\t" "st"#size " %1, %2\n\n\t" \ + ".section __ex_table,#alloc\n\t" \ + ".align 4\n\t" \ + ".word 1b, __ret_efault\n\n\t" \ + ".previous\n\n\t" \ + : "=r" (foo) : "r" (x), "m" (*__m(addr))); \ +else \ +__asm__ __volatile( \ + "/* Put user asm ret, inline. */\n" \ +"1:\t" "st"#size " %1, %2\n\n\t" \ + ".section .fixup,#alloc,#execinstr\n\t" \ + ".align 4\n" \ +"3:\n\t" \ + "ret\n\t" \ + " restore %%g0, %3, %%o0\n\t" \ + ".previous\n\n\t" \ + ".section __ex_table,#alloc\n\t" \ + ".align 4\n\t" \ + ".word 1b, 3b\n\n\t" \ + ".previous\n\n\t" \ + : "=r" (foo) : "r" (x), "m" (*__m(addr)), "i" (ret)) + +extern int __put_user_bad(void); + +#define __get_user_check(x,addr,size,type) ({ \ +register int __gu_ret; \ +register unsigned long __gu_val; \ +if (__access_ok(addr,size)) { \ +switch (size) { \ +case 1: __get_user_asm(__gu_val,ub,addr,__gu_ret); break; \ +case 2: __get_user_asm(__gu_val,uh,addr,__gu_ret); break; \ +case 4: __get_user_asm(__gu_val,,addr,__gu_ret); break; \ +case 8: __get_user_asm(__gu_val,d,addr,__gu_ret); break; \ +default: __gu_val = 0; __gu_ret = __get_user_bad(); break; \ +} } else { __gu_val = 0; __gu_ret = -EFAULT; } x = (type) __gu_val; __gu_ret; }) + +#define __get_user_check_ret(x,addr,size,type,retval) ({ \ +register unsigned long __gu_val __asm__ ("l1"); \ +if (__access_ok(addr,size)) { \ +switch (size) { \ +case 1: __get_user_asm_ret(__gu_val,ub,addr,retval); break; \ +case 2: __get_user_asm_ret(__gu_val,uh,addr,retval); break; \ +case 4: __get_user_asm_ret(__gu_val,,addr,retval); break; \ +case 8: __get_user_asm_ret(__gu_val,d,addr,retval); break; \ +default: if (__get_user_bad()) return retval; \ +} x = (type) __gu_val; } else return retval; }) + +#define __get_user_nocheck(x,addr,size,type) ({ \ +register int __gu_ret; \ +register unsigned long __gu_val; \ +switch (size) { \ +case 1: __get_user_asm(__gu_val,ub,addr,__gu_ret); break; \ +case 2: __get_user_asm(__gu_val,uh,addr,__gu_ret); break; \ +case 4: __get_user_asm(__gu_val,,addr,__gu_ret); break; \ +case 8: __get_user_asm(__gu_val,d,addr,__gu_ret); break; \ +default: __gu_val = 0; __gu_ret = __get_user_bad(); break; \ +} x = (type) __gu_val; __gu_ret; }) + +#define __get_user_nocheck_ret(x,addr,size,type,retval) ({ \ +register unsigned long __gu_val __asm__ ("l1"); \ +switch (size) { \ +case 1: __get_user_asm_ret(__gu_val,ub,addr,retval); break; \ +case 2: __get_user_asm_ret(__gu_val,uh,addr,retval); break; \ +case 4: __get_user_asm_ret(__gu_val,,addr,retval); break; \ +case 8: __get_user_asm_ret(__gu_val,d,addr,retval); break; \ +default: if (__get_user_bad()) return retval; \ +} x = (type) __gu_val; }) + +#define __get_user_asm(x,size,addr,ret) \ +__asm__ __volatile__( \ + "/* Get user asm, inline. */\n" \ +"1:\t" "ld"#size " %2, %1\n\t" \ + "clr %0\n" \ +"2:\n\n\t" \ + ".section .fixup,#alloc,#execinstr\n\t" \ + ".align 4\n" \ +"3:\n\t" \ + "clr %1\n\t" \ + "b 2b\n\t" \ + " mov %3, %0\n\n\t" \ + ".previous\n\t" \ + ".section __ex_table,#alloc\n\t" \ + ".align 4\n\t" \ + ".word 1b, 3b\n\n\t" \ + ".previous\n\t" \ + : "=&r" (ret), "=&r" (x) : "m" (*__m(addr)), \ + "i" (-EFAULT)) + +#define __get_user_asm_ret(x,size,addr,retval) \ +if (__builtin_constant_p(retval) && retval == -EFAULT) \ +__asm__ __volatile__( \ + "/* Get user asm ret, inline. */\n" \ +"1:\t" "ld"#size " %1, %0\n\n\t" \ + ".section __ex_table,#alloc\n\t" \ + ".align 4\n\t" \ + ".word 1b,__ret_efault\n\n\t" \ + ".previous\n\t" \ + : "=&r" (x) : "m" (*__m(addr))); \ +else \ +__asm__ __volatile__( \ + "/* Get user asm ret, inline. */\n" \ +"1:\t" "ld"#size " %1, %0\n\n\t" \ + ".section .fixup,#alloc,#execinstr\n\t" \ + ".align 4\n" \ +"3:\n\t" \ + "ret\n\t" \ + " restore %%g0, %2, %%o0\n\n\t" \ + ".previous\n\t" \ + ".section __ex_table,#alloc\n\t" \ + ".align 4\n\t" \ + ".word 1b, 3b\n\n\t" \ + ".previous\n\t" \ + : "=&r" (x) : "m" (*__m(addr)), "i" (retval)) + +extern int __get_user_bad(void); + +extern unsigned long __copy_user(void __user *to, const void __user *from, unsigned long size); + +static inline unsigned long copy_to_user(void __user *to, const void *from, unsigned long n) +{ + if (n && __access_ok((unsigned long) to, n)) + return __copy_user(to, (__force void __user *) from, n); + else + return n; +} + +static inline unsigned long __copy_to_user(void __user *to, const void *from, unsigned long n) +{ + return __copy_user(to, (__force void __user *) from, n); +} + +static inline unsigned long copy_from_user(void *to, const void __user *from, unsigned long n) +{ + if (n && __access_ok((unsigned long) from, n)) + return __copy_user((__force void __user *) to, from, n); + else + return n; +} + +static inline unsigned long __copy_from_user(void *to, const void __user *from, unsigned long n) +{ + return __copy_user((__force void __user *) to, from, n); +} + +#define __copy_to_user_inatomic __copy_to_user +#define __copy_from_user_inatomic __copy_from_user + +static inline unsigned long __clear_user(void __user *addr, unsigned long size) +{ + unsigned long ret; + + __asm__ __volatile__ ( + ".section __ex_table,#alloc\n\t" + ".align 4\n\t" + ".word 1f,3\n\t" + ".previous\n\t" + "mov %2, %%o1\n" + "1:\n\t" + "call __bzero\n\t" + " mov %1, %%o0\n\t" + "mov %%o0, %0\n" + : "=r" (ret) : "r" (addr), "r" (size) : + "o0", "o1", "o2", "o3", "o4", "o5", "o7", + "g1", "g2", "g3", "g4", "g5", "g7", "cc"); + + return ret; +} + +static inline unsigned long clear_user(void __user *addr, unsigned long n) +{ + if (n && __access_ok((unsigned long) addr, n)) + return __clear_user(addr, n); + else + return n; +} + +extern long __strncpy_from_user(char *dest, const char __user *src, long count); + +static inline long strncpy_from_user(char *dest, const char __user *src, long count) +{ + if (__access_ok((unsigned long) src, count)) + return __strncpy_from_user(dest, src, count); + else + return -EFAULT; +} + +extern long __strlen_user(const char __user *); +extern long __strnlen_user(const char __user *, long len); + +static inline long strlen_user(const char __user *str) +{ + if (!access_ok(VERIFY_READ, str, 0)) + return 0; + else + return __strlen_user(str); +} + +static inline long strnlen_user(const char __user *str, long len) +{ + if (!access_ok(VERIFY_READ, str, 0)) + return 0; + else + return __strnlen_user(str, len); +} + +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_UACCESS_H */ diff --git a/include/asm-sparc/unaligned.h b/include/asm-sparc/unaligned.h new file mode 100644 index 00000000000..b6f8eddd30a --- /dev/null +++ b/include/asm-sparc/unaligned.h @@ -0,0 +1,6 @@ +#ifndef _ASM_SPARC_UNALIGNED_H_ +#define _ASM_SPARC_UNALIGNED_H_ + +#include <asm-generic/unaligned.h> + +#endif /* _ASM_SPARC_UNALIGNED_H */ diff --git a/include/asm-sparc/unistd.h b/include/asm-sparc/unistd.h new file mode 100644 index 00000000000..d1f63caaa32 --- /dev/null +++ b/include/asm-sparc/unistd.h @@ -0,0 +1,518 @@ +/* $Id: unistd.h,v 1.74 2002/02/08 03:57:18 davem Exp $ */ +#ifndef _SPARC_UNISTD_H +#define _SPARC_UNISTD_H + +/* + * System calls under the Sparc. + * + * Don't be scared by the ugly clobbers, it is the only way I can + * think of right now to force the arguments into fixed registers + * before the trap into the system call with gcc 'asm' statements. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + * + * SunOS compatibility based upon preliminary work which is: + * + * Copyright (C) 1995 Adrian M. Rodriguez (adrian@remus.rutgers.edu) + */ + +#define __NR_restart_syscall 0 /* Linux Specific */ +#define __NR_exit 1 /* Common */ +#define __NR_fork 2 /* Common */ +#define __NR_read 3 /* Common */ +#define __NR_write 4 /* Common */ +#define __NR_open 5 /* Common */ +#define __NR_close 6 /* Common */ +#define __NR_wait4 7 /* Common */ +#define __NR_creat 8 /* Common */ +#define __NR_link 9 /* Common */ +#define __NR_unlink 10 /* Common */ +#define __NR_execv 11 /* SunOS Specific */ +#define __NR_chdir 12 /* Common */ +#define __NR_chown 13 /* Common */ +#define __NR_mknod 14 /* Common */ +#define __NR_chmod 15 /* Common */ +#define __NR_lchown 16 /* Common */ +#define __NR_brk 17 /* Common */ +#define __NR_perfctr 18 /* Performance counter operations */ +#define __NR_lseek 19 /* Common */ +#define __NR_getpid 20 /* Common */ +#define __NR_capget 21 /* Linux Specific */ +#define __NR_capset 22 /* Linux Specific */ +#define __NR_setuid 23 /* Implemented via setreuid in SunOS */ +#define __NR_getuid 24 /* Common */ +/* #define __NR_time alias 25 ENOSYS under SunOS */ +#define __NR_ptrace 26 /* Common */ +#define __NR_alarm 27 /* Implemented via setitimer in SunOS */ +#define __NR_sigaltstack 28 /* Common */ +#define __NR_pause 29 /* Is sigblock(0)->sigpause() in SunOS */ +#define __NR_utime 30 /* Implemented via utimes() under SunOS */ +#define __NR_lchown32 31 /* Linux sparc32 specific */ +#define __NR_fchown32 32 /* Linux sparc32 specific */ +#define __NR_access 33 /* Common */ +#define __NR_nice 34 /* Implemented via get/setpriority() in SunOS */ +#define __NR_chown32 35 /* Linux sparc32 specific */ +#define __NR_sync 36 /* Common */ +#define __NR_kill 37 /* Common */ +#define __NR_stat 38 /* Common */ +#define __NR_sendfile 39 /* Linux Specific */ +#define __NR_lstat 40 /* Common */ +#define __NR_dup 41 /* Common */ +#define __NR_pipe 42 /* Common */ +#define __NR_times 43 /* Implemented via getrusage() in SunOS */ +#define __NR_getuid32 44 /* Linux sparc32 specific */ +#define __NR_umount2 45 /* Linux Specific */ +#define __NR_setgid 46 /* Implemented via setregid() in SunOS */ +#define __NR_getgid 47 /* Common */ +#define __NR_signal 48 /* Implemented via sigvec() in SunOS */ +#define __NR_geteuid 49 /* SunOS calls getuid() */ +#define __NR_getegid 50 /* SunOS calls getgid() */ +#define __NR_acct 51 /* Common */ +/* #define __NR_memory_ordering 52 Linux sparc64 specific */ +#define __NR_getgid32 53 /* Linux sparc32 specific */ +#define __NR_ioctl 54 /* Common */ +#define __NR_reboot 55 /* Common */ +#define __NR_mmap2 56 /* Linux sparc32 Specific */ +#define __NR_symlink 57 /* Common */ +#define __NR_readlink 58 /* Common */ +#define __NR_execve 59 /* Common */ +#define __NR_umask 60 /* Common */ +#define __NR_chroot 61 /* Common */ +#define __NR_fstat 62 /* Common */ +#define __NR_fstat64 63 /* Linux sparc32 Specific */ +#define __NR_getpagesize 64 /* Common */ +#define __NR_msync 65 /* Common in newer 1.3.x revs... */ +#define __NR_vfork 66 /* Common */ +#define __NR_pread64 67 /* Linux Specific */ +#define __NR_pwrite64 68 /* Linux Specific */ +#define __NR_geteuid32 69 /* Linux sparc32, sbrk under SunOS */ +#define __NR_getegid32 70 /* Linux sparc32, sstk under SunOS */ +#define __NR_mmap 71 /* Common */ +#define __NR_setreuid32 72 /* Linux sparc32, vadvise under SunOS */ +#define __NR_munmap 73 /* Common */ +#define __NR_mprotect 74 /* Common */ +#define __NR_madvise 75 /* Common */ +#define __NR_vhangup 76 /* Common */ +#define __NR_truncate64 77 /* Linux sparc32 Specific */ +#define __NR_mincore 78 /* Common */ +#define __NR_getgroups 79 /* Common */ +#define __NR_setgroups 80 /* Common */ +#define __NR_getpgrp 81 /* Common */ +#define __NR_setgroups32 82 /* Linux sparc32, setpgrp under SunOS */ +#define __NR_setitimer 83 /* Common */ +#define __NR_ftruncate64 84 /* Linux sparc32 Specific */ +#define __NR_swapon 85 /* Common */ +#define __NR_getitimer 86 /* Common */ +#define __NR_setuid32 87 /* Linux sparc32, gethostname under SunOS */ +#define __NR_sethostname 88 /* Common */ +#define __NR_setgid32 89 /* Linux sparc32, getdtablesize under SunOS */ +#define __NR_dup2 90 /* Common */ +#define __NR_setfsuid32 91 /* Linux sparc32, getdopt under SunOS */ +#define __NR_fcntl 92 /* Common */ +#define __NR_select 93 /* Common */ +#define __NR_setfsgid32 94 /* Linux sparc32, setdopt under SunOS */ +#define __NR_fsync 95 /* Common */ +#define __NR_setpriority 96 /* Common */ +#define __NR_socket 97 /* Common */ +#define __NR_connect 98 /* Common */ +#define __NR_accept 99 /* Common */ +#define __NR_getpriority 100 /* Common */ +#define __NR_rt_sigreturn 101 /* Linux Specific */ +#define __NR_rt_sigaction 102 /* Linux Specific */ +#define __NR_rt_sigprocmask 103 /* Linux Specific */ +#define __NR_rt_sigpending 104 /* Linux Specific */ +#define __NR_rt_sigtimedwait 105 /* Linux Specific */ +#define __NR_rt_sigqueueinfo 106 /* Linux Specific */ +#define __NR_rt_sigsuspend 107 /* Linux Specific */ +#define __NR_setresuid32 108 /* Linux Specific, sigvec under SunOS */ +#define __NR_getresuid32 109 /* Linux Specific, sigblock under SunOS */ +#define __NR_setresgid32 110 /* Linux Specific, sigsetmask under SunOS */ +#define __NR_getresgid32 111 /* Linux Specific, sigpause under SunOS */ +#define __NR_setregid32 112 /* Linux sparc32, sigstack under SunOS */ +#define __NR_recvmsg 113 /* Common */ +#define __NR_sendmsg 114 /* Common */ +#define __NR_getgroups32 115 /* Linux sparc32, vtrace under SunOS */ +#define __NR_gettimeofday 116 /* Common */ +#define __NR_getrusage 117 /* Common */ +#define __NR_getsockopt 118 /* Common */ +#define __NR_getcwd 119 /* Linux Specific */ +#define __NR_readv 120 /* Common */ +#define __NR_writev 121 /* Common */ +#define __NR_settimeofday 122 /* Common */ +#define __NR_fchown 123 /* Common */ +#define __NR_fchmod 124 /* Common */ +#define __NR_recvfrom 125 /* Common */ +#define __NR_setreuid 126 /* Common */ +#define __NR_setregid 127 /* Common */ +#define __NR_rename 128 /* Common */ +#define __NR_truncate 129 /* Common */ +#define __NR_ftruncate 130 /* Common */ +#define __NR_flock 131 /* Common */ +#define __NR_lstat64 132 /* Linux sparc32 Specific */ +#define __NR_sendto 133 /* Common */ +#define __NR_shutdown 134 /* Common */ +#define __NR_socketpair 135 /* Common */ +#define __NR_mkdir 136 /* Common */ +#define __NR_rmdir 137 /* Common */ +#define __NR_utimes 138 /* SunOS Specific */ +#define __NR_stat64 139 /* Linux sparc32 Specific */ +#define __NR_sendfile64 140 /* adjtime under SunOS */ +#define __NR_getpeername 141 /* Common */ +#define __NR_futex 142 /* gethostid under SunOS */ +#define __NR_gettid 143 /* ENOSYS under SunOS */ +#define __NR_getrlimit 144 /* Common */ +#define __NR_setrlimit 145 /* Common */ +#define __NR_pivot_root 146 /* Linux Specific, killpg under SunOS */ +#define __NR_prctl 147 /* ENOSYS under SunOS */ +#define __NR_pciconfig_read 148 /* ENOSYS under SunOS */ +#define __NR_pciconfig_write 149 /* ENOSYS under SunOS */ +#define __NR_getsockname 150 /* Common */ +/* #define __NR_getmsg 151 SunOS Specific */ +/* #define __NR_putmsg 152 SunOS Specific */ +#define __NR_poll 153 /* Common */ +#define __NR_getdents64 154 /* Linux specific */ +#define __NR_fcntl64 155 /* Linux sparc32 Specific */ +/* #define __NR_getdirentires 156 SunOS Specific */ +#define __NR_statfs 157 /* Common */ +#define __NR_fstatfs 158 /* Common */ +#define __NR_umount 159 /* Common */ +#define __NR_sched_set_affinity 160 /* Linux specific, async_daemon under SunOS */ +#define __NR_sched_get_affinity 161 /* Linux specific, getfh under SunOS */ +#define __NR_getdomainname 162 /* SunOS Specific */ +#define __NR_setdomainname 163 /* Common */ +/* #define __NR_ni_syscall 164 ENOSYS under SunOS */ +#define __NR_quotactl 165 /* Common */ +#define __NR_set_tid_address 166 /* Linux specific, exportfs under SunOS */ +#define __NR_mount 167 /* Common */ +#define __NR_ustat 168 /* Common */ +#define __NR_setxattr 169 /* SunOS: semsys */ +#define __NR_lsetxattr 170 /* SunOS: msgsys */ +#define __NR_fsetxattr 171 /* SunOS: shmsys */ +#define __NR_getxattr 172 /* SunOS: auditsys */ +#define __NR_lgetxattr 173 /* SunOS: rfssys */ +#define __NR_getdents 174 /* Common */ +#define __NR_setsid 175 /* Common */ +#define __NR_fchdir 176 /* Common */ +#define __NR_fgetxattr 177 /* SunOS: fchroot */ +#define __NR_listxattr 178 /* SunOS: vpixsys */ +#define __NR_llistxattr 179 /* SunOS: aioread */ +#define __NR_flistxattr 180 /* SunOS: aiowrite */ +#define __NR_removexattr 181 /* SunOS: aiowait */ +#define __NR_lremovexattr 182 /* SunOS: aiocancel */ +#define __NR_sigpending 183 /* Common */ +#define __NR_query_module 184 /* Linux Specific */ +#define __NR_setpgid 185 /* Common */ +#define __NR_fremovexattr 186 /* SunOS: pathconf */ +#define __NR_tkill 187 /* SunOS: fpathconf */ +#define __NR_exit_group 188 /* Linux specific, sysconf undef SunOS */ +#define __NR_uname 189 /* Linux Specific */ +#define __NR_init_module 190 /* Linux Specific */ +#define __NR_personality 191 /* Linux Specific */ +#define __NR_remap_file_pages 192 /* Linux Specific */ +#define __NR_epoll_create 193 /* Linux Specific */ +#define __NR_epoll_ctl 194 /* Linux Specific */ +#define __NR_epoll_wait 195 /* Linux Specific */ +/* #define __NR_ulimit 196 Linux Specific */ +#define __NR_getppid 197 /* Linux Specific */ +#define __NR_sigaction 198 /* Linux Specific */ +#define __NR_sgetmask 199 /* Linux Specific */ +#define __NR_ssetmask 200 /* Linux Specific */ +#define __NR_sigsuspend 201 /* Linux Specific */ +#define __NR_oldlstat 202 /* Linux Specific */ +#define __NR_uselib 203 /* Linux Specific */ +#define __NR_readdir 204 /* Linux Specific */ +#define __NR_readahead 205 /* Linux Specific */ +#define __NR_socketcall 206 /* Linux Specific */ +#define __NR_syslog 207 /* Linux Specific */ +#define __NR_lookup_dcookie 208 /* Linux Specific */ +#define __NR_fadvise64 209 /* Linux Specific */ +#define __NR_fadvise64_64 210 /* Linux Specific */ +#define __NR_tgkill 211 /* Linux Specific */ +#define __NR_waitpid 212 /* Linux Specific */ +#define __NR_swapoff 213 /* Linux Specific */ +#define __NR_sysinfo 214 /* Linux Specific */ +#define __NR_ipc 215 /* Linux Specific */ +#define __NR_sigreturn 216 /* Linux Specific */ +#define __NR_clone 217 /* Linux Specific */ +/* #define __NR_modify_ldt 218 Linux Specific - i386 specific, unused */ +#define __NR_adjtimex 219 /* Linux Specific */ +#define __NR_sigprocmask 220 /* Linux Specific */ +#define __NR_create_module 221 /* Linux Specific */ +#define __NR_delete_module 222 /* Linux Specific */ +#define __NR_get_kernel_syms 223 /* Linux Specific */ +#define __NR_getpgid 224 /* Linux Specific */ +#define __NR_bdflush 225 /* Linux Specific */ +#define __NR_sysfs 226 /* Linux Specific */ +#define __NR_afs_syscall 227 /* Linux Specific */ +#define __NR_setfsuid 228 /* Linux Specific */ +#define __NR_setfsgid 229 /* Linux Specific */ +#define __NR__newselect 230 /* Linux Specific */ +#define __NR_time 231 /* Linux Specific */ +/* #define __NR_oldstat 232 Linux Specific */ +#define __NR_stime 233 /* Linux Specific */ +#define __NR_statfs64 234 /* Linux Specific */ +#define __NR_fstatfs64 235 /* Linux Specific */ +#define __NR__llseek 236 /* Linux Specific */ +#define __NR_mlock 237 +#define __NR_munlock 238 +#define __NR_mlockall 239 +#define __NR_munlockall 240 +#define __NR_sched_setparam 241 +#define __NR_sched_getparam 242 +#define __NR_sched_setscheduler 243 +#define __NR_sched_getscheduler 244 +#define __NR_sched_yield 245 +#define __NR_sched_get_priority_max 246 +#define __NR_sched_get_priority_min 247 +#define __NR_sched_rr_get_interval 248 +#define __NR_nanosleep 249 +#define __NR_mremap 250 +#define __NR__sysctl 251 +#define __NR_getsid 252 +#define __NR_fdatasync 253 +#define __NR_nfsservctl 254 +#define __NR_aplib 255 +#define __NR_clock_settime 256 +#define __NR_clock_gettime 257 +#define __NR_clock_getres 258 +#define __NR_clock_nanosleep 259 +#define __NR_sched_getaffinity 260 +#define __NR_sched_setaffinity 261 +#define __NR_timer_settime 262 +#define __NR_timer_gettime 263 +#define __NR_timer_getoverrun 264 +#define __NR_timer_delete 265 +#define __NR_timer_create 266 +/* #define __NR_vserver 267 Reserved for VSERVER */ +#define __NR_io_setup 268 +#define __NR_io_destroy 269 +#define __NR_io_submit 270 +#define __NR_io_cancel 271 +#define __NR_io_getevents 272 +#define __NR_mq_open 273 +#define __NR_mq_unlink 274 +#define __NR_mq_timedsend 275 +#define __NR_mq_timedreceive 276 +#define __NR_mq_notify 277 +#define __NR_mq_getsetattr 278 +#define __NR_waitid 279 +#define __NR_sys_setaltroot 280 +#define __NR_add_key 281 +#define __NR_request_key 282 +#define __NR_keyctl 283 + +/* WARNING: You MAY NOT add syscall numbers larger than 283, since + * all of the syscall tables in the Sparc kernel are + * sized to have 283 entries (starting at zero). Therefore + * find a free slot in the 0-282 range. + */ + +#define _syscall0(type,name) \ +type name(void) \ +{ \ +long __res; \ +register long __g1 __asm__ ("g1") = __NR_##name; \ +__asm__ __volatile__ ("t 0x10\n\t" \ + "bcc 1f\n\t" \ + "mov %%o0, %0\n\t" \ + "sub %%g0, %%o0, %0\n\t" \ + "1:\n\t" \ + : "=r" (__res)\ + : "r" (__g1) \ + : "o0", "cc"); \ +if (__res < -255 || __res >= 0) \ + return (type) __res; \ +errno = -__res; \ +return -1; \ +} + +#define _syscall1(type,name,type1,arg1) \ +type name(type1 arg1) \ +{ \ +long __res; \ +register long __g1 __asm__ ("g1") = __NR_##name; \ +register long __o0 __asm__ ("o0") = (long)(arg1); \ +__asm__ __volatile__ ("t 0x10\n\t" \ + "bcc 1f\n\t" \ + "mov %%o0, %0\n\t" \ + "sub %%g0, %%o0, %0\n\t" \ + "1:\n\t" \ + : "=r" (__res), "=&r" (__o0) \ + : "1" (__o0), "r" (__g1) \ + : "cc"); \ +if (__res < -255 || __res >= 0) \ + return (type) __res; \ +errno = -__res; \ +return -1; \ +} + +#define _syscall2(type,name,type1,arg1,type2,arg2) \ +type name(type1 arg1,type2 arg2) \ +{ \ +long __res; \ +register long __g1 __asm__ ("g1") = __NR_##name; \ +register long __o0 __asm__ ("o0") = (long)(arg1); \ +register long __o1 __asm__ ("o1") = (long)(arg2); \ +__asm__ __volatile__ ("t 0x10\n\t" \ + "bcc 1f\n\t" \ + "mov %%o0, %0\n\t" \ + "sub %%g0, %%o0, %0\n\t" \ + "1:\n\t" \ + : "=r" (__res), "=&r" (__o0) \ + : "1" (__o0), "r" (__o1), "r" (__g1) \ + : "cc"); \ +if (__res < -255 || __res >= 0) \ + return (type) __res; \ +errno = -__res; \ +return -1; \ +} + +#define _syscall3(type,name,type1,arg1,type2,arg2,type3,arg3) \ +type name(type1 arg1,type2 arg2,type3 arg3) \ +{ \ +long __res; \ +register long __g1 __asm__ ("g1") = __NR_##name; \ +register long __o0 __asm__ ("o0") = (long)(arg1); \ +register long __o1 __asm__ ("o1") = (long)(arg2); \ +register long __o2 __asm__ ("o2") = (long)(arg3); \ +__asm__ __volatile__ ("t 0x10\n\t" \ + "bcc 1f\n\t" \ + "mov %%o0, %0\n\t" \ + "sub %%g0, %%o0, %0\n\t" \ + "1:\n\t" \ + : "=r" (__res), "=&r" (__o0) \ + : "1" (__o0), "r" (__o1), "r" (__o2), "r" (__g1) \ + : "cc"); \ +if (__res < -255 || __res>=0) \ + return (type) __res; \ +errno = -__res; \ +return -1; \ +} + +#define _syscall4(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4) \ +type name (type1 arg1, type2 arg2, type3 arg3, type4 arg4) \ +{ \ +long __res; \ +register long __g1 __asm__ ("g1") = __NR_##name; \ +register long __o0 __asm__ ("o0") = (long)(arg1); \ +register long __o1 __asm__ ("o1") = (long)(arg2); \ +register long __o2 __asm__ ("o2") = (long)(arg3); \ +register long __o3 __asm__ ("o3") = (long)(arg4); \ +__asm__ __volatile__ ("t 0x10\n\t" \ + "bcc 1f\n\t" \ + "mov %%o0, %0\n\t" \ + "sub %%g0, %%o0, %0\n\t" \ + "1:\n\t" \ + : "=r" (__res), "=&r" (__o0) \ + : "1" (__o0), "r" (__o1), "r" (__o2), "r" (__o3), "r" (__g1) \ + : "cc"); \ +if (__res < -255 || __res>=0) \ + return (type) __res; \ +errno = -__res; \ +return -1; \ +} + +#define _syscall5(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4, \ + type5,arg5) \ +type name (type1 arg1,type2 arg2,type3 arg3,type4 arg4,type5 arg5) \ +{ \ +long __res; \ +register long __g1 __asm__ ("g1") = __NR_##name; \ +register long __o0 __asm__ ("o0") = (long)(arg1); \ +register long __o1 __asm__ ("o1") = (long)(arg2); \ +register long __o2 __asm__ ("o2") = (long)(arg3); \ +register long __o3 __asm__ ("o3") = (long)(arg4); \ +register long __o4 __asm__ ("o4") = (long)(arg5); \ +__asm__ __volatile__ ("t 0x10\n\t" \ + "bcc 1f\n\t" \ + "mov %%o0, %0\n\t" \ + "sub %%g0, %%o0, %0\n\t" \ + "1:\n\t" \ + : "=r" (__res), "=&r" (__o0) \ + : "1" (__o0), "r" (__o1), "r" (__o2), "r" (__o3), "r" (__o4), "r" (__g1) \ + : "cc"); \ +if (__res < -255 || __res>=0) \ + return (type) __res; \ +errno = -__res; \ +return -1; \ +} + +#ifdef __KERNEL__ +#define __ARCH_WANT_IPC_PARSE_VERSION +#define __ARCH_WANT_OLD_READDIR +#define __ARCH_WANT_STAT64 +#define __ARCH_WANT_SYS_ALARM +#define __ARCH_WANT_SYS_GETHOSTNAME +#define __ARCH_WANT_SYS_PAUSE +#define __ARCH_WANT_SYS_SGETMASK +#define __ARCH_WANT_SYS_SIGNAL +#define __ARCH_WANT_SYS_TIME +#define __ARCH_WANT_SYS_UTIME +#define __ARCH_WANT_SYS_WAITPID +#define __ARCH_WANT_SYS_SOCKETCALL +#define __ARCH_WANT_SYS_FADVISE64 +#define __ARCH_WANT_SYS_GETPGRP +#define __ARCH_WANT_SYS_LLSEEK +#define __ARCH_WANT_SYS_NICE +#define __ARCH_WANT_SYS_OLD_GETRLIMIT +#define __ARCH_WANT_SYS_OLDUMOUNT +#define __ARCH_WANT_SYS_SIGPENDING +#define __ARCH_WANT_SYS_SIGPROCMASK +#endif + +#ifdef __KERNEL_SYSCALLS__ + +#include <linux/compiler.h> +#include <linux/types.h> + +/* + * we need this inline - forking from kernel space will result + * in NO COPY ON WRITE (!!!), until an execve is executed. This + * is no problem, but for the stack. This is handled by not letting + * main() use the stack at all after fork(). Thus, no function + * calls - which means inline code for fork too, as otherwise we + * would use the stack upon exit from 'fork()'. + * + * Actually only pause and fork are needed inline, so that there + * won't be any messing with the stack from main(), but we define + * some others too. + */ +#define __NR__exit __NR_exit +static __inline__ _syscall0(pid_t,setsid) +static __inline__ _syscall3(int,write,int,fd,__const__ char *,buf,off_t,count) +static __inline__ _syscall3(int,read,int,fd,char *,buf,off_t,count) +static __inline__ _syscall3(off_t,lseek,int,fd,off_t,offset,int,count) +static __inline__ _syscall1(int,dup,int,fd) +static __inline__ _syscall3(int,execve,__const__ char *,file,char **,argv,char **,envp) +static __inline__ _syscall3(int,open,__const__ char *,file,int,flag,int,mode) +static __inline__ _syscall1(int,close,int,fd) +static __inline__ _syscall3(pid_t,waitpid,pid_t,pid,int *,wait_stat,int,options) + +#include <linux/linkage.h> + +asmlinkage unsigned long sys_mmap( + unsigned long addr, unsigned long len, + unsigned long prot, unsigned long flags, + unsigned long fd, unsigned long off); +asmlinkage unsigned long sys_mmap2( + unsigned long addr, unsigned long len, + unsigned long prot, unsigned long flags, + unsigned long fd, unsigned long pgoff); +struct sigaction; +asmlinkage long sys_rt_sigaction(int sig, + const struct sigaction __user *act, + struct sigaction __user *oact, + void __user *restorer, + size_t sigsetsize); + +#endif /* __KERNEL_SYSCALLS__ */ + +/* + * "Conditional" syscalls + * + * What we want is __attribute__((weak,alias("sys_ni_syscall"))), + * but it doesn't work on all toolchains, so we just do it by hand + */ +#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") + +#endif /* _SPARC_UNISTD_H */ diff --git a/include/asm-sparc/user.h b/include/asm-sparc/user.h new file mode 100644 index 00000000000..b5f1abf733d --- /dev/null +++ b/include/asm-sparc/user.h @@ -0,0 +1,60 @@ +/* $Id: user.h,v 1.5 1998/02/23 01:49:22 rth Exp $ + * asm-sparc/user.h: Core file definitions for the Sparc. + * + * Keep in sync with reg.h. Actually, we could get rid of this + * one, since we won't a.out core dump that much anyways - miguel. + * Copyright (C) 1995 (davem@caip.rutgers.edu) + */ +#ifndef _SPARC_USER_H +#define _SPARC_USER_H + +#include <asm/a.out.h> +struct sunos_regs { + unsigned long psr, pc, npc, y; + unsigned long regs[15]; +}; + +struct sunos_fpqueue { + unsigned long *addr; + unsigned long inst; +}; + +struct sunos_fp { + union { + unsigned long regs[32]; + double reg_dbls[16]; + } fregs; + unsigned long fsr; + unsigned long flags; + unsigned long extra; + unsigned long fpq_count; + struct sunos_fpqueue fpq[16]; +}; + +struct sunos_fpu { + struct sunos_fp fpstatus; +}; + +/* The SunOS core file header layout. */ +struct user { + unsigned long magic; + unsigned long len; + struct sunos_regs regs; + struct exec uexec; + int signal; + size_t u_tsize; /* all of these in bytes! */ + size_t u_dsize; + size_t u_ssize; + char u_comm[17]; + struct sunos_fpu fpu; + unsigned long sigcode; /* Special sigcontext subcode, if any */ +}; + +#define NBPG 0x2000 +#define UPAGES 1 +#define HOST_TEXT_START_ADDR (u.start_code) +#define HOST_DATA_START_ADDR (u.uexec.a_data) +#define HOST_STACK_END_ADDR (- u.u_ssize * NBPG) +#define SUNOS_CORE_MAGIC 0x080456 + +#endif /* !(_SPARC_USER_H) */ diff --git a/include/asm-sparc/vac-ops.h b/include/asm-sparc/vac-ops.h new file mode 100644 index 00000000000..9e017232304 --- /dev/null +++ b/include/asm-sparc/vac-ops.h @@ -0,0 +1,136 @@ +/* $Id: vac-ops.h,v 1.13 1998/01/30 10:59:59 jj Exp $ */ +#ifndef _SPARC_VAC_OPS_H +#define _SPARC_VAC_OPS_H + +/* vac-ops.h: Inline assembly routines to do operations on the Sparc + * VAC (virtual address cache) for the sun4c. + * + * Copyright (C) 1994, David S. Miller (davem@caip.rutgers.edu) + */ + +#include <linux/config.h> +#include <asm/sysen.h> +#include <asm/contregs.h> +#include <asm/asi.h> + +/* The SUN4C models have a virtually addressed write-through + * cache. + * + * The cache tags are directly accessible through an ASI and + * each have the form: + * + * ------------------------------------------------------------ + * | MBZ | CONTEXT | WRITE | PRIV | VALID | MBZ | TagID | MBZ | + * ------------------------------------------------------------ + * 31 25 24 22 21 20 19 18 16 15 2 1 0 + * + * MBZ: These bits are either unused and/or reserved and should + * be written as zeroes. + * + * CONTEXT: Records the context to which this cache line belongs. + * + * WRITE: A copy of the writable bit from the mmu pte access bits. + * + * PRIV: A copy of the privileged bit from the pte access bits. + * + * VALID: If set, this line is valid, else invalid. + * + * TagID: Fourteen bits of tag ID. + * + * Every virtual address is seen by the cache like this: + * + * ---------------------------------------- + * | RESV | TagID | LINE | BYTE-in-LINE | + * ---------------------------------------- + * 31 30 29 16 15 4 3 0 + * + * RESV: Unused/reserved. + * + * TagID: Used to match the Tag-ID in that vac tags. + * + * LINE: Which line within the cache + * + * BYTE-in-LINE: Which byte within the cache line. + */ + +/* Sun4c VAC Tags */ +#define S4CVACTAG_CID 0x01c00000 +#define S4CVACTAG_W 0x00200000 +#define S4CVACTAG_P 0x00100000 +#define S4CVACTAG_V 0x00080000 +#define S4CVACTAG_TID 0x0000fffc + +/* Sun4c VAC Virtual Address */ +/* These aren't used, why bother? (Anton) */ +#if 0 +#define S4CVACVA_TID 0x3fff0000 +#define S4CVACVA_LINE 0x0000fff0 +#define S4CVACVA_BIL 0x0000000f +#endif + +/* The indexing of cache lines creates a problem. Because the line + * field of a virtual address extends past the page offset within + * the virtual address it is possible to have what are called + * 'bad aliases' which will create inconsistencies. So we must make + * sure that within a context that if a physical page is mapped + * more than once, that 'extra' line bits are the same. If this is + * not the case, and thus is a 'bad alias' we must turn off the + * cacheable bit in the pte's of all such pages. + */ + +#ifdef CONFIG_SUN4 +#define S4CVAC_BADBITS 0x0001e000 +#else +#define S4CVAC_BADBITS 0x0000f000 +#endif + +/* The following is true if vaddr1 and vaddr2 would cause + * a 'bad alias'. + */ +#define S4CVAC_BADALIAS(vaddr1, vaddr2) \ + ((((unsigned long) (vaddr1)) ^ ((unsigned long) (vaddr2))) & \ + (S4CVAC_BADBITS)) + +/* The following structure describes the characteristics of a sun4c + * VAC as probed from the prom during boot time. + */ +struct sun4c_vac_props { + unsigned int num_bytes; /* Size of the cache */ + unsigned int num_lines; /* Number of cache lines */ + unsigned int do_hwflushes; /* Hardware flushing available? */ + enum { VAC_NONE, VAC_WRITE_THROUGH, + VAC_WRITE_BACK } type; /* What type of VAC? */ + unsigned int linesize; /* Size of each line in bytes */ + unsigned int log2lsize; /* log2(linesize) */ + unsigned int on; /* VAC is enabled */ +}; + +extern struct sun4c_vac_props sun4c_vacinfo; + +/* sun4c_enable_vac() enables the sun4c virtual address cache. */ +static inline void sun4c_enable_vac(void) +{ + __asm__ __volatile__("lduba [%0] %1, %%g1\n\t" + "or %%g1, %2, %%g1\n\t" + "stba %%g1, [%0] %1\n\t" + : /* no outputs */ + : "r" ((unsigned int) AC_SENABLE), + "i" (ASI_CONTROL), "i" (SENABLE_CACHE) + : "g1", "memory"); + sun4c_vacinfo.on = 1; +} + +/* sun4c_disable_vac() disables the virtual address cache. */ +static inline void sun4c_disable_vac(void) +{ + __asm__ __volatile__("lduba [%0] %1, %%g1\n\t" + "andn %%g1, %2, %%g1\n\t" + "stba %%g1, [%0] %1\n\t" + : /* no outputs */ + : "r" ((unsigned int) AC_SENABLE), + "i" (ASI_CONTROL), "i" (SENABLE_CACHE) + : "g1", "memory"); + sun4c_vacinfo.on = 0; +} + +#endif /* !(_SPARC_VAC_OPS_H) */ diff --git a/include/asm-sparc/vaddrs.h b/include/asm-sparc/vaddrs.h new file mode 100644 index 00000000000..91097392c8c --- /dev/null +++ b/include/asm-sparc/vaddrs.h @@ -0,0 +1,70 @@ +/* $Id: vaddrs.h,v 1.27 2001/07/04 00:18:18 davem Exp $ */ +#ifndef _SPARC_VADDRS_H +#define _SPARC_VADDRS_H + +#include <asm/head.h> + +/* + * asm-sparc/vaddrs.h: Here we define the virtual addresses at + * which important things will be mapped. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + * Copyright (C) 2000 Anton Blanchard (anton@samba.org) + */ + +#define SRMMU_MAXMEM 0x0c000000 + +#define SRMMU_NOCACHE_VADDR (KERNBASE + SRMMU_MAXMEM) + /* = 0x0fc000000 */ +/* XXX Empiricals - this needs to go away - KMW */ +#define SRMMU_MIN_NOCACHE_PAGES (550) +#define SRMMU_MAX_NOCACHE_PAGES (1280) + +/* The following constant is used in mm/srmmu.c::srmmu_nocache_calcsize() + * to determine the amount of memory that will be reserved as nocache: + * + * 256 pages will be taken as nocache per each + * SRMMU_NOCACHE_ALCRATIO MB of system memory. + * + * limits enforced: nocache minimum = 256 pages + * nocache maximum = 1280 pages + */ +#define SRMMU_NOCACHE_ALCRATIO 64 /* 256 pages per 64MB of system RAM */ + +#define SUN4M_IOBASE_VADDR 0xfd000000 /* Base for mapping pages */ +#define IOBASE_VADDR 0xfe000000 +#define IOBASE_END 0xfe600000 + +#define VMALLOC_START 0xfe600000 + +/* XXX Alter this when I get around to fixing sun4c - Anton */ +#define VMALLOC_END 0xffc00000 + +/* + * On the sun4/4c we need a place + * to reliably map locked down kernel data. This includes the + * task_struct and kernel stack pages of each process plus the + * scsi buffers during dvma IO transfers, also the floppy buffers + * during pseudo dma which runs with traps off (no faults allowed). + * Some quick calculations yield: + * NR_TASKS <512> * (3 * PAGE_SIZE) == 0x600000 + * Subtract this from 0xc00000 and you get 0x927C0 of vm left + * over to map SCSI dvma + floppy pseudo-dma buffers. So be + * careful if you change NR_TASKS or else there won't be enough + * room for it all. + */ +#define SUN4C_LOCK_VADDR 0xff000000 +#define SUN4C_LOCK_END 0xffc00000 + +#define KADB_DEBUGGER_BEGVM 0xffc00000 /* Where kern debugger is in virt-mem */ +#define KADB_DEBUGGER_ENDVM 0xffd00000 +#define DEBUG_FIRSTVADDR KADB_DEBUGGER_BEGVM +#define DEBUG_LASTVADDR KADB_DEBUGGER_ENDVM + +#define LINUX_OPPROM_BEGVM 0xffd00000 +#define LINUX_OPPROM_ENDVM 0xfff00000 + +#define DVMA_VADDR 0xfff00000 /* Base area of the DVMA on suns */ +#define DVMA_END 0xfffc0000 + +#endif /* !(_SPARC_VADDRS_H) */ diff --git a/include/asm-sparc/vfc_ioctls.h b/include/asm-sparc/vfc_ioctls.h new file mode 100644 index 00000000000..af8b69007b2 --- /dev/null +++ b/include/asm-sparc/vfc_ioctls.h @@ -0,0 +1,58 @@ +/* Copyright (c) 1996 by Manish Vachharajani */ + +#ifndef _LINUX_VFC_IOCTLS_H_ +#define _LINUX_VFC_IOCTLS_H_ + + /* IOCTLs */ +#define VFC_IOCTL(a) (('j' << 8) | a) +#define VFCGCTRL (VFC_IOCTL (0)) /* get vfc attributes */ +#define VFCSCTRL (VFC_IOCTL (1)) /* set vfc attributes */ +#define VFCGVID (VFC_IOCTL (2)) /* get video decoder attributes */ +#define VFCSVID (VFC_IOCTL (3)) /* set video decoder attributes */ +#define VFCHUE (VFC_IOCTL (4)) /* set hue */ +#define VFCPORTCHG (VFC_IOCTL (5)) /* change port */ +#define VFCRDINFO (VFC_IOCTL (6)) /* read info */ + + /* Options for setting the vfc attributes and status */ +#define MEMPRST 0x1 /* reset FIFO ptr. */ +#define CAPTRCMD 0x2 /* start capture and wait */ +#define DIAGMODE 0x3 /* diag mode */ +#define NORMMODE 0x4 /* normal mode */ +#define CAPTRSTR 0x5 /* start capture */ +#define CAPTRWAIT 0x6 /* wait for capture to finish */ + + + /* Options for the decoder */ +#define STD_NTSC 0x1 /* NTSC mode */ +#define STD_PAL 0x2 /* PAL mode */ +#define COLOR_ON 0x3 /* force color ON */ +#define MONO 0x4 /* force color OFF */ + + /* Values returned by ioctl 2 */ + +#define NO_LOCK 1 +#define NTSC_COLOR 2 +#define NTSC_NOCOLOR 3 +#define PAL_COLOR 4 +#define PAL_NOCOLOR 5 + +/* Not too sure what this does yet */ + /* Options for setting Field number */ +#define ODD_FIELD 0x1 +#define EVEN_FIELD 0x0 +#define ACTIVE_ONLY 0x2 +#define NON_ACTIVE 0x0 + +/* Debug options */ +#define VFC_I2C_SEND 0 +#define VFC_I2C_RECV 1 + +struct vfc_debug_inout +{ + unsigned long addr; + unsigned long ret; + unsigned long len; + unsigned char __user *buffer; +}; + +#endif /* _LINUX_VFC_IOCTLS_H_ */ diff --git a/include/asm-sparc/viking.h b/include/asm-sparc/viking.h new file mode 100644 index 00000000000..7541da71b9d --- /dev/null +++ b/include/asm-sparc/viking.h @@ -0,0 +1,253 @@ +/* $Id: viking.h,v 1.19 1997/04/20 14:11:48 ecd Exp $ + * viking.h: Defines specific to the GNU/Viking MBUS module. + * This is SRMMU stuff. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ +#ifndef _SPARC_VIKING_H +#define _SPARC_VIKING_H + +#include <asm/asi.h> +#include <asm/mxcc.h> +#include <asm/pgtsrmmu.h> + +/* Bits in the SRMMU control register for GNU/Viking modules. + * + * ----------------------------------------------------------- + * |impl-vers| RSV |TC|AC|SP|BM|PC|MBM|SB|IC|DC|PSO|RSV|NF|ME| + * ----------------------------------------------------------- + * 31 24 23-17 16 15 14 13 12 11 10 9 8 7 6-2 1 0 + * + * TC: Tablewalk Cacheable -- 0 = Twalks are not cacheable in E-cache + * 1 = Twalks are cacheable in E-cache + * + * GNU/Viking will only cache tablewalks in the E-cache (mxcc) if present + * and never caches them internally (or so states the docs). Therefore + * for machines lacking an E-cache (ie. in MBUS mode) this bit must + * remain cleared. + * + * AC: Alternate Cacheable -- 0 = Passthru physical accesses not cacheable + * 1 = Passthru physical accesses cacheable + * + * This indicates whether accesses are cacheable when no cachable bit + * is present in the pte when the processor is in boot-mode or the + * access does not need pte's for translation (ie. pass-thru ASI's). + * "Cachable" is only referring to E-cache (if present) and not the + * on chip split I/D caches of the GNU/Viking. + * + * SP: SnooP Enable -- 0 = bus snooping off, 1 = bus snooping on + * + * This enables snooping on the GNU/Viking bus. This must be on + * for the hardware cache consistency mechanisms of the GNU/Viking + * to work at all. On non-mxcc GNU/Viking modules the split I/D + * caches will snoop regardless of whether they are enabled, this + * takes care of the case where the I or D or both caches are turned + * off yet still contain valid data. Note also that this bit does + * not affect GNU/Viking store-buffer snoops, those happen if the + * store-buffer is enabled no matter what. + * + * BM: Boot Mode -- 0 = not in boot mode, 1 = in boot mode + * + * This indicates whether the GNU/Viking is in boot-mode or not, + * if it is then all instruction fetch physical addresses are + * computed as 0xff0000000 + low 28 bits of requested address. + * GNU/Viking boot-mode does not affect data accesses. Also, + * in boot mode instruction accesses bypass the split on chip I/D + * caches, they may be cached by the GNU/MXCC if present and enabled. + * + * MBM: MBus Mode -- 0 = not in MBus mode, 1 = in MBus mode + * + * This indicated the GNU/Viking configuration present. If in + * MBUS mode, the GNU/Viking lacks a GNU/MXCC E-cache. If it is + * not then the GNU/Viking is on a module VBUS connected directly + * to a GNU/MXCC cache controller. The GNU/MXCC can be thus connected + * to either an GNU/MBUS (sun4m) or the packet-switched GNU/XBus (sun4d). + * + * SB: StoreBuffer enable -- 0 = store buffer off, 1 = store buffer on + * + * The GNU/Viking store buffer allows the chip to continue execution + * after a store even if the data cannot be placed in one of the + * caches during that cycle. If disabled, all stores operations + * occur synchronously. + * + * IC: Instruction Cache -- 0 = off, 1 = on + * DC: Data Cache -- 0 = off, 1 = 0n + * + * These bits enable the on-cpu GNU/Viking split I/D caches. Note, + * as mentioned above, these caches will snoop the bus in GNU/MBUS + * configurations even when disabled to avoid data corruption. + * + * NF: No Fault -- 0 = faults generate traps, 1 = faults don't trap + * ME: MMU enable -- 0 = mmu not translating, 1 = mmu translating + * + */ + +#define VIKING_MMUENABLE 0x00000001 +#define VIKING_NOFAULT 0x00000002 +#define VIKING_PSO 0x00000080 +#define VIKING_DCENABLE 0x00000100 /* Enable data cache */ +#define VIKING_ICENABLE 0x00000200 /* Enable instruction cache */ +#define VIKING_SBENABLE 0x00000400 /* Enable store buffer */ +#define VIKING_MMODE 0x00000800 /* MBUS mode */ +#define VIKING_PCENABLE 0x00001000 /* Enable parity checking */ +#define VIKING_BMODE 0x00002000 +#define VIKING_SPENABLE 0x00004000 /* Enable bus cache snooping */ +#define VIKING_ACENABLE 0x00008000 /* Enable alternate caching */ +#define VIKING_TCENABLE 0x00010000 /* Enable table-walks to be cached */ +#define VIKING_DPENABLE 0x00040000 /* Enable the data prefetcher */ + +/* + * GNU/Viking Breakpoint Action Register fields. + */ +#define VIKING_ACTION_MIX 0x00001000 /* Enable multiple instructions */ + +/* + * GNU/Viking Cache Tags. + */ +#define VIKING_PTAG_VALID 0x01000000 /* Cache block is valid */ +#define VIKING_PTAG_DIRTY 0x00010000 /* Block has been modified */ +#define VIKING_PTAG_SHARED 0x00000100 /* Shared with some other cache */ + +#ifndef __ASSEMBLY__ + +static inline void viking_flush_icache(void) +{ + __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t" + : /* no outputs */ + : "i" (ASI_M_IC_FLCLEAR) + : "memory"); +} + +static inline void viking_flush_dcache(void) +{ + __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t" + : /* no outputs */ + : "i" (ASI_M_DC_FLCLEAR) + : "memory"); +} + +static inline void viking_unlock_icache(void) +{ + __asm__ __volatile__("sta %%g0, [%0] %1\n\t" + : /* no outputs */ + : "r" (0x80000000), "i" (ASI_M_IC_FLCLEAR) + : "memory"); +} + +static inline void viking_unlock_dcache(void) +{ + __asm__ __volatile__("sta %%g0, [%0] %1\n\t" + : /* no outputs */ + : "r" (0x80000000), "i" (ASI_M_DC_FLCLEAR) + : "memory"); +} + +static inline void viking_set_bpreg(unsigned long regval) +{ + __asm__ __volatile__("sta %0, [%%g0] %1\n\t" + : /* no outputs */ + : "r" (regval), "i" (ASI_M_ACTION) + : "memory"); +} + +static inline unsigned long viking_get_bpreg(void) +{ + unsigned long regval; + + __asm__ __volatile__("lda [%%g0] %1, %0\n\t" + : "=r" (regval) + : "i" (ASI_M_ACTION)); + return regval; +} + +static inline void viking_get_dcache_ptag(int set, int block, + unsigned long *data) +{ + unsigned long ptag = ((set & 0x7f) << 5) | ((block & 0x3) << 26) | + 0x80000000; + unsigned long info, page; + + __asm__ __volatile__ ("ldda [%2] %3, %%g2\n\t" + "or %%g0, %%g2, %0\n\t" + "or %%g0, %%g3, %1\n\t" + : "=r" (info), "=r" (page) + : "r" (ptag), "i" (ASI_M_DATAC_TAG) + : "g2", "g3"); + data[0] = info; + data[1] = page; +} + +static inline void viking_mxcc_turn_off_parity(unsigned long *mregp, + unsigned long *mxcc_cregp) +{ + unsigned long mreg = *mregp; + unsigned long mxcc_creg = *mxcc_cregp; + + mreg &= ~(VIKING_PCENABLE); + mxcc_creg &= ~(MXCC_CTL_PARE); + + __asm__ __volatile__ ("set 1f, %%g2\n\t" + "andcc %%g2, 4, %%g0\n\t" + "bne 2f\n\t" + " nop\n" + "1:\n\t" + "sta %0, [%%g0] %3\n\t" + "sta %1, [%2] %4\n\t" + "b 1f\n\t" + " nop\n\t" + "nop\n" + "2:\n\t" + "sta %0, [%%g0] %3\n\t" + "sta %1, [%2] %4\n" + "1:\n\t" + : /* no output */ + : "r" (mreg), "r" (mxcc_creg), + "r" (MXCC_CREG), "i" (ASI_M_MMUREGS), + "i" (ASI_M_MXCC) + : "g2", "memory", "cc"); + *mregp = mreg; + *mxcc_cregp = mxcc_creg; +} + +static inline unsigned long viking_hwprobe(unsigned long vaddr) +{ + unsigned long val; + + vaddr &= PAGE_MASK; + /* Probe all MMU entries. */ + __asm__ __volatile__("lda [%1] %2, %0\n\t" + : "=r" (val) + : "r" (vaddr | 0x400), "i" (ASI_M_FLUSH_PROBE)); + if (!val) + return 0; + + /* Probe region. */ + __asm__ __volatile__("lda [%1] %2, %0\n\t" + : "=r" (val) + : "r" (vaddr | 0x200), "i" (ASI_M_FLUSH_PROBE)); + if ((val & SRMMU_ET_MASK) == SRMMU_ET_PTE) { + vaddr &= ~SRMMU_PGDIR_MASK; + vaddr >>= PAGE_SHIFT; + return val | (vaddr << 8); + } + + /* Probe segment. */ + __asm__ __volatile__("lda [%1] %2, %0\n\t" + : "=r" (val) + : "r" (vaddr | 0x100), "i" (ASI_M_FLUSH_PROBE)); + if ((val & SRMMU_ET_MASK) == SRMMU_ET_PTE) { + vaddr &= ~SRMMU_REAL_PMD_MASK; + vaddr >>= PAGE_SHIFT; + return val | (vaddr << 8); + } + + /* Probe page. */ + __asm__ __volatile__("lda [%1] %2, %0\n\t" + : "=r" (val) + : "r" (vaddr), "i" (ASI_M_FLUSH_PROBE)); + return val; +} + +#endif /* !__ASSEMBLY__ */ + +#endif /* !(_SPARC_VIKING_H) */ diff --git a/include/asm-sparc/vuid_event.h b/include/asm-sparc/vuid_event.h new file mode 100644 index 00000000000..7781e9f2fdd --- /dev/null +++ b/include/asm-sparc/vuid_event.h @@ -0,0 +1,41 @@ +/* SunOS Virtual User Input Device (VUID) compatibility */ + + +typedef struct firm_event { + unsigned short id; /* tag for this event */ + unsigned char pair_type; /* unused by X11 */ + unsigned char pair; /* unused by X11 */ + int value; /* VKEY_UP, VKEY_DOWN or delta */ + struct timeval time; +} Firm_event; + +enum { + FE_PAIR_NONE, + FE_PAIR_SET, + FE_PAIR_DELTA, + FE_PAIR_ABSOLUTE +}; + +/* VUID stream formats */ +#define VUID_NATIVE 0 /* Native byte stream format */ +#define VUID_FIRM_EVENT 1 /* send firm_event structures */ + +/* ioctls */ + /* Set input device byte stream format (any of VUID_{NATIVE,FIRM_EVENT}) */ +#define VUIDSFORMAT _IOW('v', 1, int) + /* Retrieve input device byte stream format */ +#define VUIDGFORMAT _IOR('v', 2, int) + +/* Possible tag values */ +/* mouse buttons: */ +#define MS_LEFT 0x7f20 +#define MS_MIDDLE 0x7f21 +#define MS_RIGHT 0x7f22 +/* motion: */ +#define LOC_X_DELTA 0x7f80 +#define LOC_Y_DELTA 0x7f81 +#define LOC_X_ABSOLUTE 0x7f82 /* X compat, unsupported */ +#define LOC_Y_ABSOLUTE 0x7f83 /* X compat, unsupported */ + +#define VKEY_UP 0 +#define VKEY_DOWN 1 diff --git a/include/asm-sparc/winmacro.h b/include/asm-sparc/winmacro.h new file mode 100644 index 00000000000..557257eef3f --- /dev/null +++ b/include/asm-sparc/winmacro.h @@ -0,0 +1,136 @@ +/* $Id: winmacro.h,v 1.22 2000/05/09 17:40:15 davem Exp $ + * winmacro.h: Window loading-unloading macros. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef _SPARC_WINMACRO_H +#define _SPARC_WINMACRO_H + +#include <linux/config.h> +#include <asm/ptrace.h> + +/* Store the register window onto the 8-byte aligned area starting + * at %reg. It might be %sp, it might not, we don't care. + */ +#define STORE_WINDOW(reg) \ + std %l0, [%reg + RW_L0]; \ + std %l2, [%reg + RW_L2]; \ + std %l4, [%reg + RW_L4]; \ + std %l6, [%reg + RW_L6]; \ + std %i0, [%reg + RW_I0]; \ + std %i2, [%reg + RW_I2]; \ + std %i4, [%reg + RW_I4]; \ + std %i6, [%reg + RW_I6]; + +/* Load a register window from the area beginning at %reg. */ +#define LOAD_WINDOW(reg) \ + ldd [%reg + RW_L0], %l0; \ + ldd [%reg + RW_L2], %l2; \ + ldd [%reg + RW_L4], %l4; \ + ldd [%reg + RW_L6], %l6; \ + ldd [%reg + RW_I0], %i0; \ + ldd [%reg + RW_I2], %i2; \ + ldd [%reg + RW_I4], %i4; \ + ldd [%reg + RW_I6], %i6; + +/* Loading and storing struct pt_reg trap frames. */ +#define LOAD_PT_INS(base_reg) \ + ldd [%base_reg + STACKFRAME_SZ + PT_I0], %i0; \ + ldd [%base_reg + STACKFRAME_SZ + PT_I2], %i2; \ + ldd [%base_reg + STACKFRAME_SZ + PT_I4], %i4; \ + ldd [%base_reg + STACKFRAME_SZ + PT_I6], %i6; + +#define LOAD_PT_GLOBALS(base_reg) \ + ld [%base_reg + STACKFRAME_SZ + PT_G1], %g1; \ + ldd [%base_reg + STACKFRAME_SZ + PT_G2], %g2; \ + ldd [%base_reg + STACKFRAME_SZ + PT_G4], %g4; \ + ldd [%base_reg + STACKFRAME_SZ + PT_G6], %g6; + +#define LOAD_PT_YREG(base_reg, scratch) \ + ld [%base_reg + STACKFRAME_SZ + PT_Y], %scratch; \ + wr %scratch, 0x0, %y; + +#define LOAD_PT_PRIV(base_reg, pt_psr, pt_pc, pt_npc) \ + ld [%base_reg + STACKFRAME_SZ + PT_PSR], %pt_psr; \ + ld [%base_reg + STACKFRAME_SZ + PT_PC], %pt_pc; \ + ld [%base_reg + STACKFRAME_SZ + PT_NPC], %pt_npc; + +#define LOAD_PT_ALL(base_reg, pt_psr, pt_pc, pt_npc, scratch) \ + LOAD_PT_YREG(base_reg, scratch) \ + LOAD_PT_INS(base_reg) \ + LOAD_PT_GLOBALS(base_reg) \ + LOAD_PT_PRIV(base_reg, pt_psr, pt_pc, pt_npc) + +#define STORE_PT_INS(base_reg) \ + std %i0, [%base_reg + STACKFRAME_SZ + PT_I0]; \ + std %i2, [%base_reg + STACKFRAME_SZ + PT_I2]; \ + std %i4, [%base_reg + STACKFRAME_SZ + PT_I4]; \ + std %i6, [%base_reg + STACKFRAME_SZ + PT_I6]; + +#define STORE_PT_GLOBALS(base_reg) \ + st %g1, [%base_reg + STACKFRAME_SZ + PT_G1]; \ + std %g2, [%base_reg + STACKFRAME_SZ + PT_G2]; \ + std %g4, [%base_reg + STACKFRAME_SZ + PT_G4]; \ + std %g6, [%base_reg + STACKFRAME_SZ + PT_G6]; + +#define STORE_PT_YREG(base_reg, scratch) \ + rd %y, %scratch; \ + st %scratch, [%base_reg + STACKFRAME_SZ + PT_Y]; + +#define STORE_PT_PRIV(base_reg, pt_psr, pt_pc, pt_npc) \ + st %pt_psr, [%base_reg + STACKFRAME_SZ + PT_PSR]; \ + st %pt_pc, [%base_reg + STACKFRAME_SZ + PT_PC]; \ + st %pt_npc, [%base_reg + STACKFRAME_SZ + PT_NPC]; + +#define STORE_PT_ALL(base_reg, reg_psr, reg_pc, reg_npc, g_scratch) \ + STORE_PT_PRIV(base_reg, reg_psr, reg_pc, reg_npc) \ + STORE_PT_GLOBALS(base_reg) \ + STORE_PT_YREG(base_reg, g_scratch) \ + STORE_PT_INS(base_reg) + +#define SAVE_BOLIXED_USER_STACK(cur_reg, scratch) \ + ld [%cur_reg + TI_W_SAVED], %scratch; \ + sll %scratch, 2, %scratch; \ + add %scratch, %cur_reg, %scratch; \ + st %sp, [%scratch + TI_RWIN_SPTRS]; \ + sub %scratch, %cur_reg, %scratch; \ + sll %scratch, 4, %scratch; \ + add %scratch, %cur_reg, %scratch; \ + STORE_WINDOW(scratch + TI_REG_WINDOW); \ + sub %scratch, %cur_reg, %scratch; \ + srl %scratch, 6, %scratch; \ + add %scratch, 1, %scratch; \ + st %scratch, [%cur_reg + TI_W_SAVED]; + +#ifdef CONFIG_SMP +#define LOAD_CURRENT4M(dest_reg, idreg) \ + rd %tbr, %idreg; \ + sethi %hi(current_set), %dest_reg; \ + srl %idreg, 10, %idreg; \ + or %dest_reg, %lo(current_set), %dest_reg; \ + and %idreg, 0xc, %idreg; \ + ld [%idreg + %dest_reg], %dest_reg; + +#define LOAD_CURRENT4D(dest_reg, idreg) \ + lda [%g0] ASI_M_VIKING_TMP1, %idreg; \ + sethi %hi(C_LABEL(current_set)), %dest_reg; \ + sll %idreg, 2, %idreg; \ + or %dest_reg, %lo(C_LABEL(current_set)), %dest_reg; \ + ld [%idreg + %dest_reg], %dest_reg; + +/* Blackbox - take care with this... - check smp4m and smp4d before changing this. */ +#define LOAD_CURRENT(dest_reg, idreg) \ + sethi %hi(___b_load_current), %idreg; \ + sethi %hi(current_set), %dest_reg; \ + sethi %hi(boot_cpu_id4), %idreg; \ + or %dest_reg, %lo(current_set), %dest_reg; \ + ldub [%idreg + %lo(boot_cpu_id4)], %idreg; \ + ld [%idreg + %dest_reg], %dest_reg; +#else +#define LOAD_CURRENT(dest_reg, idreg) \ + sethi %hi(current_set), %idreg; \ + ld [%idreg + %lo(current_set)], %dest_reg; +#endif + +#endif /* !(_SPARC_WINMACRO_H) */ diff --git a/include/asm-sparc/xor.h b/include/asm-sparc/xor.h new file mode 100644 index 00000000000..f34b2cfa820 --- /dev/null +++ b/include/asm-sparc/xor.h @@ -0,0 +1,269 @@ +/* + * include/asm-sparc/xor.h + * + * Optimized RAID-5 checksumming functions for 32-bit Sparc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * You should have received a copy of the GNU General Public License + * (for example /usr/src/linux/COPYING); if not, write to the Free + * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* + * High speed xor_block operation for RAID4/5 utilizing the + * ldd/std SPARC instructions. + * + * Copyright (C) 1999 Jakub Jelinek (jj@ultra.linux.cz) + */ + +static void +sparc_2(unsigned long bytes, unsigned long *p1, unsigned long *p2) +{ + int lines = bytes / (sizeof (long)) / 8; + + do { + __asm__ __volatile__( + "ldd [%0 + 0x00], %%g2\n\t" + "ldd [%0 + 0x08], %%g4\n\t" + "ldd [%0 + 0x10], %%o0\n\t" + "ldd [%0 + 0x18], %%o2\n\t" + "ldd [%1 + 0x00], %%o4\n\t" + "ldd [%1 + 0x08], %%l0\n\t" + "ldd [%1 + 0x10], %%l2\n\t" + "ldd [%1 + 0x18], %%l4\n\t" + "xor %%g2, %%o4, %%g2\n\t" + "xor %%g3, %%o5, %%g3\n\t" + "xor %%g4, %%l0, %%g4\n\t" + "xor %%g5, %%l1, %%g5\n\t" + "xor %%o0, %%l2, %%o0\n\t" + "xor %%o1, %%l3, %%o1\n\t" + "xor %%o2, %%l4, %%o2\n\t" + "xor %%o3, %%l5, %%o3\n\t" + "std %%g2, [%0 + 0x00]\n\t" + "std %%g4, [%0 + 0x08]\n\t" + "std %%o0, [%0 + 0x10]\n\t" + "std %%o2, [%0 + 0x18]\n" + : + : "r" (p1), "r" (p2) + : "g2", "g3", "g4", "g5", + "o0", "o1", "o2", "o3", "o4", "o5", + "l0", "l1", "l2", "l3", "l4", "l5"); + p1 += 8; + p2 += 8; + } while (--lines > 0); +} + +static void +sparc_3(unsigned long bytes, unsigned long *p1, unsigned long *p2, + unsigned long *p3) +{ + int lines = bytes / (sizeof (long)) / 8; + + do { + __asm__ __volatile__( + "ldd [%0 + 0x00], %%g2\n\t" + "ldd [%0 + 0x08], %%g4\n\t" + "ldd [%0 + 0x10], %%o0\n\t" + "ldd [%0 + 0x18], %%o2\n\t" + "ldd [%1 + 0x00], %%o4\n\t" + "ldd [%1 + 0x08], %%l0\n\t" + "ldd [%1 + 0x10], %%l2\n\t" + "ldd [%1 + 0x18], %%l4\n\t" + "xor %%g2, %%o4, %%g2\n\t" + "xor %%g3, %%o5, %%g3\n\t" + "ldd [%2 + 0x00], %%o4\n\t" + "xor %%g4, %%l0, %%g4\n\t" + "xor %%g5, %%l1, %%g5\n\t" + "ldd [%2 + 0x08], %%l0\n\t" + "xor %%o0, %%l2, %%o0\n\t" + "xor %%o1, %%l3, %%o1\n\t" + "ldd [%2 + 0x10], %%l2\n\t" + "xor %%o2, %%l4, %%o2\n\t" + "xor %%o3, %%l5, %%o3\n\t" + "ldd [%2 + 0x18], %%l4\n\t" + "xor %%g2, %%o4, %%g2\n\t" + "xor %%g3, %%o5, %%g3\n\t" + "xor %%g4, %%l0, %%g4\n\t" + "xor %%g5, %%l1, %%g5\n\t" + "xor %%o0, %%l2, %%o0\n\t" + "xor %%o1, %%l3, %%o1\n\t" + "xor %%o2, %%l4, %%o2\n\t" + "xor %%o3, %%l5, %%o3\n\t" + "std %%g2, [%0 + 0x00]\n\t" + "std %%g4, [%0 + 0x08]\n\t" + "std %%o0, [%0 + 0x10]\n\t" + "std %%o2, [%0 + 0x18]\n" + : + : "r" (p1), "r" (p2), "r" (p3) + : "g2", "g3", "g4", "g5", + "o0", "o1", "o2", "o3", "o4", "o5", + "l0", "l1", "l2", "l3", "l4", "l5"); + p1 += 8; + p2 += 8; + p3 += 8; + } while (--lines > 0); +} + +static void +sparc_4(unsigned long bytes, unsigned long *p1, unsigned long *p2, + unsigned long *p3, unsigned long *p4) +{ + int lines = bytes / (sizeof (long)) / 8; + + do { + __asm__ __volatile__( + "ldd [%0 + 0x00], %%g2\n\t" + "ldd [%0 + 0x08], %%g4\n\t" + "ldd [%0 + 0x10], %%o0\n\t" + "ldd [%0 + 0x18], %%o2\n\t" + "ldd [%1 + 0x00], %%o4\n\t" + "ldd [%1 + 0x08], %%l0\n\t" + "ldd [%1 + 0x10], %%l2\n\t" + "ldd [%1 + 0x18], %%l4\n\t" + "xor %%g2, %%o4, %%g2\n\t" + "xor %%g3, %%o5, %%g3\n\t" + "ldd [%2 + 0x00], %%o4\n\t" + "xor %%g4, %%l0, %%g4\n\t" + "xor %%g5, %%l1, %%g5\n\t" + "ldd [%2 + 0x08], %%l0\n\t" + "xor %%o0, %%l2, %%o0\n\t" + "xor %%o1, %%l3, %%o1\n\t" + "ldd [%2 + 0x10], %%l2\n\t" + "xor %%o2, %%l4, %%o2\n\t" + "xor %%o3, %%l5, %%o3\n\t" + "ldd [%2 + 0x18], %%l4\n\t" + "xor %%g2, %%o4, %%g2\n\t" + "xor %%g3, %%o5, %%g3\n\t" + "ldd [%3 + 0x00], %%o4\n\t" + "xor %%g4, %%l0, %%g4\n\t" + "xor %%g5, %%l1, %%g5\n\t" + "ldd [%3 + 0x08], %%l0\n\t" + "xor %%o0, %%l2, %%o0\n\t" + "xor %%o1, %%l3, %%o1\n\t" + "ldd [%3 + 0x10], %%l2\n\t" + "xor %%o2, %%l4, %%o2\n\t" + "xor %%o3, %%l5, %%o3\n\t" + "ldd [%3 + 0x18], %%l4\n\t" + "xor %%g2, %%o4, %%g2\n\t" + "xor %%g3, %%o5, %%g3\n\t" + "xor %%g4, %%l0, %%g4\n\t" + "xor %%g5, %%l1, %%g5\n\t" + "xor %%o0, %%l2, %%o0\n\t" + "xor %%o1, %%l3, %%o1\n\t" + "xor %%o2, %%l4, %%o2\n\t" + "xor %%o3, %%l5, %%o3\n\t" + "std %%g2, [%0 + 0x00]\n\t" + "std %%g4, [%0 + 0x08]\n\t" + "std %%o0, [%0 + 0x10]\n\t" + "std %%o2, [%0 + 0x18]\n" + : + : "r" (p1), "r" (p2), "r" (p3), "r" (p4) + : "g2", "g3", "g4", "g5", + "o0", "o1", "o2", "o3", "o4", "o5", + "l0", "l1", "l2", "l3", "l4", "l5"); + p1 += 8; + p2 += 8; + p3 += 8; + p4 += 8; + } while (--lines > 0); +} + +static void +sparc_5(unsigned long bytes, unsigned long *p1, unsigned long *p2, + unsigned long *p3, unsigned long *p4, unsigned long *p5) +{ + int lines = bytes / (sizeof (long)) / 8; + + do { + __asm__ __volatile__( + "ldd [%0 + 0x00], %%g2\n\t" + "ldd [%0 + 0x08], %%g4\n\t" + "ldd [%0 + 0x10], %%o0\n\t" + "ldd [%0 + 0x18], %%o2\n\t" + "ldd [%1 + 0x00], %%o4\n\t" + "ldd [%1 + 0x08], %%l0\n\t" + "ldd [%1 + 0x10], %%l2\n\t" + "ldd [%1 + 0x18], %%l4\n\t" + "xor %%g2, %%o4, %%g2\n\t" + "xor %%g3, %%o5, %%g3\n\t" + "ldd [%2 + 0x00], %%o4\n\t" + "xor %%g4, %%l0, %%g4\n\t" + "xor %%g5, %%l1, %%g5\n\t" + "ldd [%2 + 0x08], %%l0\n\t" + "xor %%o0, %%l2, %%o0\n\t" + "xor %%o1, %%l3, %%o1\n\t" + "ldd [%2 + 0x10], %%l2\n\t" + "xor %%o2, %%l4, %%o2\n\t" + "xor %%o3, %%l5, %%o3\n\t" + "ldd [%2 + 0x18], %%l4\n\t" + "xor %%g2, %%o4, %%g2\n\t" + "xor %%g3, %%o5, %%g3\n\t" + "ldd [%3 + 0x00], %%o4\n\t" + "xor %%g4, %%l0, %%g4\n\t" + "xor %%g5, %%l1, %%g5\n\t" + "ldd [%3 + 0x08], %%l0\n\t" + "xor %%o0, %%l2, %%o0\n\t" + "xor %%o1, %%l3, %%o1\n\t" + "ldd [%3 + 0x10], %%l2\n\t" + "xor %%o2, %%l4, %%o2\n\t" + "xor %%o3, %%l5, %%o3\n\t" + "ldd [%3 + 0x18], %%l4\n\t" + "xor %%g2, %%o4, %%g2\n\t" + "xor %%g3, %%o5, %%g3\n\t" + "ldd [%4 + 0x00], %%o4\n\t" + "xor %%g4, %%l0, %%g4\n\t" + "xor %%g5, %%l1, %%g5\n\t" + "ldd [%4 + 0x08], %%l0\n\t" + "xor %%o0, %%l2, %%o0\n\t" + "xor %%o1, %%l3, %%o1\n\t" + "ldd [%4 + 0x10], %%l2\n\t" + "xor %%o2, %%l4, %%o2\n\t" + "xor %%o3, %%l5, %%o3\n\t" + "ldd [%4 + 0x18], %%l4\n\t" + "xor %%g2, %%o4, %%g2\n\t" + "xor %%g3, %%o5, %%g3\n\t" + "xor %%g4, %%l0, %%g4\n\t" + "xor %%g5, %%l1, %%g5\n\t" + "xor %%o0, %%l2, %%o0\n\t" + "xor %%o1, %%l3, %%o1\n\t" + "xor %%o2, %%l4, %%o2\n\t" + "xor %%o3, %%l5, %%o3\n\t" + "std %%g2, [%0 + 0x00]\n\t" + "std %%g4, [%0 + 0x08]\n\t" + "std %%o0, [%0 + 0x10]\n\t" + "std %%o2, [%0 + 0x18]\n" + : + : "r" (p1), "r" (p2), "r" (p3), "r" (p4), "r" (p5) + : "g2", "g3", "g4", "g5", + "o0", "o1", "o2", "o3", "o4", "o5", + "l0", "l1", "l2", "l3", "l4", "l5"); + p1 += 8; + p2 += 8; + p3 += 8; + p4 += 8; + p5 += 8; + } while (--lines > 0); +} + +static struct xor_block_template xor_block_SPARC = { + .name = "SPARC", + .do_2 = sparc_2, + .do_3 = sparc_3, + .do_4 = sparc_4, + .do_5 = sparc_5, +}; + +/* For grins, also test the generic routines. */ +#include <asm-generic/xor.h> + +#undef XOR_TRY_TEMPLATES +#define XOR_TRY_TEMPLATES \ + do { \ + xor_speed(&xor_block_8regs); \ + xor_speed(&xor_block_32regs); \ + xor_speed(&xor_block_SPARC); \ + } while (0) |