diff options
Diffstat (limited to 'include/asm-sparc/uaccess_32.h')
| -rw-r--r-- | include/asm-sparc/uaccess_32.h | 336 |
1 files changed, 336 insertions, 0 deletions
diff --git a/include/asm-sparc/uaccess_32.h b/include/asm-sparc/uaccess_32.h new file mode 100644 index 00000000000..47d5619d43f --- /dev/null +++ b/include/asm-sparc/uaccess_32.h @@ -0,0 +1,336 @@ +/* + * uaccess.h: User space memore access functions. + * + * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu) + * Copyright (C) 1996,1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz) + */ +#ifndef _ASM_UACCESS_H +#define _ASM_UACCESS_H + +#ifdef __KERNEL__ +#include <linux/compiler.h> +#include <linux/sched.h> +#include <linux/string.h> +#include <linux/errno.h> +#include <asm/vac-ops.h> +#endif + +#ifndef __ASSEMBLY__ + +/* Sparc is not segmented, however we need to be able to fool access_ok() + * when doing system calls from kernel mode legitimately. + * + * "For historical reasons, these macros are grossly misnamed." -Linus + */ + +#define KERNEL_DS ((mm_segment_t) { 0 }) +#define USER_DS ((mm_segment_t) { -1 }) + +#define VERIFY_READ 0 +#define VERIFY_WRITE 1 + +#define get_ds() (KERNEL_DS) +#define get_fs() (current->thread.current_ds) +#define set_fs(val) ((current->thread.current_ds) = (val)) + +#define segment_eq(a,b) ((a).seg == (b).seg) + +/* We have there a nice not-mapped page at PAGE_OFFSET - PAGE_SIZE, so that this test + * can be fairly lightweight. + * No one can read/write anything from userland in the kernel space by setting + * large size and address near to PAGE_OFFSET - a fault will break his intentions. + */ +#define __user_ok(addr, size) ({ (void)(size); (addr) < STACK_TOP; }) +#define __kernel_ok (segment_eq(get_fs(), KERNEL_DS)) +#define __access_ok(addr,size) (__user_ok((addr) & get_fs().seg,(size))) +#define access_ok(type, addr, size) \ + ({ (void)(type); __access_ok((unsigned long)(addr), size); }) + +/* + * The exception table consists of pairs of addresses: the first is the + * address of an instruction that is allowed to fault, and the second is + * the address at which the program should continue. No registers are + * modified, so it is entirely up to the continuation code to figure out + * what to do. + * + * All the routines below use bits of fixup code that are out of line + * with the main instruction path. This means when everything is well, + * we don't even have to jump over them. Further, they do not intrude + * on our cache or tlb entries. + * + * There is a special way how to put a range of potentially faulting + * insns (like twenty ldd/std's with now intervening other instructions) + * You specify address of first in insn and 0 in fixup and in the next + * exception_table_entry you specify last potentially faulting insn + 1 + * and in fixup the routine which should handle the fault. + * That fixup code will get + * (faulting_insn_address - first_insn_in_the_range_address)/4 + * in %g2 (ie. index of the faulting instruction in the range). + */ + +struct exception_table_entry +{ + unsigned long insn, fixup; +}; + +/* Returns 0 if exception not found and fixup otherwise. */ +extern unsigned long search_extables_range(unsigned long addr, unsigned long *g2); + +extern void __ret_efault(void); + +/* Uh, these should become the main single-value transfer routines.. + * They automatically use the right size if we just have the right + * pointer type.. + * + * This gets kind of ugly. We want to return _two_ values in "get_user()" + * and yet we don't want to do any pointers, because that is too much + * of a performance impact. Thus we have a few rather ugly macros here, + * and hide all the ugliness from the user. + */ +#define put_user(x,ptr) ({ \ +unsigned long __pu_addr = (unsigned long)(ptr); \ +__chk_user_ptr(ptr); \ +__put_user_check((__typeof__(*(ptr)))(x),__pu_addr,sizeof(*(ptr))); }) + +#define get_user(x,ptr) ({ \ +unsigned long __gu_addr = (unsigned long)(ptr); \ +__chk_user_ptr(ptr); \ +__get_user_check((x),__gu_addr,sizeof(*(ptr)),__typeof__(*(ptr))); }) + +/* + * The "__xxx" versions do not do address space checking, useful when + * doing multiple accesses to the same area (the user has to do the + * checks by hand with "access_ok()") + */ +#define __put_user(x,ptr) __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr))) +#define __get_user(x,ptr) __get_user_nocheck((x),(ptr),sizeof(*(ptr)),__typeof__(*(ptr))) + +struct __large_struct { unsigned long buf[100]; }; +#define __m(x) ((struct __large_struct __user *)(x)) + +#define __put_user_check(x,addr,size) ({ \ +register int __pu_ret; \ +if (__access_ok(addr,size)) { \ +switch (size) { \ +case 1: __put_user_asm(x,b,addr,__pu_ret); break; \ +case 2: __put_user_asm(x,h,addr,__pu_ret); break; \ +case 4: __put_user_asm(x,,addr,__pu_ret); break; \ +case 8: __put_user_asm(x,d,addr,__pu_ret); break; \ +default: __pu_ret = __put_user_bad(); break; \ +} } else { __pu_ret = -EFAULT; } __pu_ret; }) + +#define __put_user_nocheck(x,addr,size) ({ \ +register int __pu_ret; \ +switch (size) { \ +case 1: __put_user_asm(x,b,addr,__pu_ret); break; \ +case 2: __put_user_asm(x,h,addr,__pu_ret); break; \ +case 4: __put_user_asm(x,,addr,__pu_ret); break; \ +case 8: __put_user_asm(x,d,addr,__pu_ret); break; \ +default: __pu_ret = __put_user_bad(); break; \ +} __pu_ret; }) + +#define __put_user_asm(x,size,addr,ret) \ +__asm__ __volatile__( \ + "/* Put user asm, inline. */\n" \ +"1:\t" "st"#size " %1, %2\n\t" \ + "clr %0\n" \ +"2:\n\n\t" \ + ".section .fixup,#alloc,#execinstr\n\t" \ + ".align 4\n" \ +"3:\n\t" \ + "b 2b\n\t" \ + " mov %3, %0\n\t" \ + ".previous\n\n\t" \ + ".section __ex_table,#alloc\n\t" \ + ".align 4\n\t" \ + ".word 1b, 3b\n\t" \ + ".previous\n\n\t" \ + : "=&r" (ret) : "r" (x), "m" (*__m(addr)), \ + "i" (-EFAULT)) + +extern int __put_user_bad(void); + +#define __get_user_check(x,addr,size,type) ({ \ +register int __gu_ret; \ +register unsigned long __gu_val; \ +if (__access_ok(addr,size)) { \ +switch (size) { \ +case 1: __get_user_asm(__gu_val,ub,addr,__gu_ret); break; \ +case 2: __get_user_asm(__gu_val,uh,addr,__gu_ret); break; \ +case 4: __get_user_asm(__gu_val,,addr,__gu_ret); break; \ +case 8: __get_user_asm(__gu_val,d,addr,__gu_ret); break; \ +default: __gu_val = 0; __gu_ret = __get_user_bad(); break; \ +} } else { __gu_val = 0; __gu_ret = -EFAULT; } x = (type) __gu_val; __gu_ret; }) + +#define __get_user_check_ret(x,addr,size,type,retval) ({ \ +register unsigned long __gu_val __asm__ ("l1"); \ +if (__access_ok(addr,size)) { \ +switch (size) { \ +case 1: __get_user_asm_ret(__gu_val,ub,addr,retval); break; \ +case 2: __get_user_asm_ret(__gu_val,uh,addr,retval); break; \ +case 4: __get_user_asm_ret(__gu_val,,addr,retval); break; \ +case 8: __get_user_asm_ret(__gu_val,d,addr,retval); break; \ +default: if (__get_user_bad()) return retval; \ +} x = (type) __gu_val; } else return retval; }) + +#define __get_user_nocheck(x,addr,size,type) ({ \ +register int __gu_ret; \ +register unsigned long __gu_val; \ +switch (size) { \ +case 1: __get_user_asm(__gu_val,ub,addr,__gu_ret); break; \ +case 2: __get_user_asm(__gu_val,uh,addr,__gu_ret); break; \ +case 4: __get_user_asm(__gu_val,,addr,__gu_ret); break; \ +case 8: __get_user_asm(__gu_val,d,addr,__gu_ret); break; \ +default: __gu_val = 0; __gu_ret = __get_user_bad(); break; \ +} x = (type) __gu_val; __gu_ret; }) + +#define __get_user_nocheck_ret(x,addr,size,type,retval) ({ \ +register unsigned long __gu_val __asm__ ("l1"); \ +switch (size) { \ +case 1: __get_user_asm_ret(__gu_val,ub,addr,retval); break; \ +case 2: __get_user_asm_ret(__gu_val,uh,addr,retval); break; \ +case 4: __get_user_asm_ret(__gu_val,,addr,retval); break; \ +case 8: __get_user_asm_ret(__gu_val,d,addr,retval); break; \ +default: if (__get_user_bad()) return retval; \ +} x = (type) __gu_val; }) + +#define __get_user_asm(x,size,addr,ret) \ +__asm__ __volatile__( \ + "/* Get user asm, inline. */\n" \ +"1:\t" "ld"#size " %2, %1\n\t" \ + "clr %0\n" \ +"2:\n\n\t" \ + ".section .fixup,#alloc,#execinstr\n\t" \ + ".align 4\n" \ +"3:\n\t" \ + "clr %1\n\t" \ + "b 2b\n\t" \ + " mov %3, %0\n\n\t" \ + ".previous\n\t" \ + ".section __ex_table,#alloc\n\t" \ + ".align 4\n\t" \ + ".word 1b, 3b\n\n\t" \ + ".previous\n\t" \ + : "=&r" (ret), "=&r" (x) : "m" (*__m(addr)), \ + "i" (-EFAULT)) + +#define __get_user_asm_ret(x,size,addr,retval) \ +if (__builtin_constant_p(retval) && retval == -EFAULT) \ +__asm__ __volatile__( \ + "/* Get user asm ret, inline. */\n" \ +"1:\t" "ld"#size " %1, %0\n\n\t" \ + ".section __ex_table,#alloc\n\t" \ + ".align 4\n\t" \ + ".word 1b,__ret_efault\n\n\t" \ + ".previous\n\t" \ + : "=&r" (x) : "m" (*__m(addr))); \ +else \ +__asm__ __volatile__( \ + "/* Get user asm ret, inline. */\n" \ +"1:\t" "ld"#size " %1, %0\n\n\t" \ + ".section .fixup,#alloc,#execinstr\n\t" \ + ".align 4\n" \ +"3:\n\t" \ + "ret\n\t" \ + " restore %%g0, %2, %%o0\n\n\t" \ + ".previous\n\t" \ + ".section __ex_table,#alloc\n\t" \ + ".align 4\n\t" \ + ".word 1b, 3b\n\n\t" \ + ".previous\n\t" \ + : "=&r" (x) : "m" (*__m(addr)), "i" (retval)) + +extern int __get_user_bad(void); + +extern unsigned long __copy_user(void __user *to, const void __user *from, unsigned long size); + +static inline unsigned long copy_to_user(void __user *to, const void *from, unsigned long n) +{ + if (n && __access_ok((unsigned long) to, n)) + return __copy_user(to, (__force void __user *) from, n); + else + return n; +} + +static inline unsigned long __copy_to_user(void __user *to, const void *from, unsigned long n) +{ + return __copy_user(to, (__force void __user *) from, n); +} + +static inline unsigned long copy_from_user(void *to, const void __user *from, unsigned long n) +{ + if (n && __access_ok((unsigned long) from, n)) + return __copy_user((__force void __user *) to, from, n); + else + return n; +} + +static inline unsigned long __copy_from_user(void *to, const void __user *from, unsigned long n) +{ + return __copy_user((__force void __user *) to, from, n); +} + +#define __copy_to_user_inatomic __copy_to_user +#define __copy_from_user_inatomic __copy_from_user + +static inline unsigned long __clear_user(void __user *addr, unsigned long size) +{ + unsigned long ret; + + __asm__ __volatile__ ( + ".section __ex_table,#alloc\n\t" + ".align 4\n\t" + ".word 1f,3\n\t" + ".previous\n\t" + "mov %2, %%o1\n" + "1:\n\t" + "call __bzero\n\t" + " mov %1, %%o0\n\t" + "mov %%o0, %0\n" + : "=r" (ret) : "r" (addr), "r" (size) : + "o0", "o1", "o2", "o3", "o4", "o5", "o7", + "g1", "g2", "g3", "g4", "g5", "g7", "cc"); + + return ret; +} + +static inline unsigned long clear_user(void __user *addr, unsigned long n) +{ + if (n && __access_ok((unsigned long) addr, n)) + return __clear_user(addr, n); + else + return n; +} + +extern long __strncpy_from_user(char *dest, const char __user *src, long count); + +static inline long strncpy_from_user(char *dest, const char __user *src, long count) +{ + if (__access_ok((unsigned long) src, count)) + return __strncpy_from_user(dest, src, count); + else + return -EFAULT; +} + +extern long __strlen_user(const char __user *); +extern long __strnlen_user(const char __user *, long len); + +static inline long strlen_user(const char __user *str) +{ + if (!access_ok(VERIFY_READ, str, 0)) + return 0; + else + return __strlen_user(str); +} + +static inline long strnlen_user(const char __user *str, long len) +{ + if (!access_ok(VERIFY_READ, str, 0)) + return 0; + else + return __strnlen_user(str, len); +} + +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_UACCESS_H */ |