diff options
Diffstat (limited to 'include/asm-powerpc')
63 files changed, 5361 insertions, 472 deletions
diff --git a/include/asm-powerpc/8xx_immap.h b/include/asm-powerpc/8xx_immap.h new file mode 100644 index 00000000000..1311cefdfd3 --- /dev/null +++ b/include/asm-powerpc/8xx_immap.h @@ -0,0 +1,564 @@ +/* + * MPC8xx Internal Memory Map + * Copyright (c) 1997 Dan Malek (dmalek@jlc.net) + * + * The I/O on the MPC860 is comprised of blocks of special registers + * and the dual port ram for the Communication Processor Module. + * Within this space are functional units such as the SIU, memory + * controller, system timers, and other control functions. It is + * a combination that I found difficult to separate into logical + * functional files.....but anyone else is welcome to try. -- Dan + */ +#ifdef __KERNEL__ +#ifndef __IMMAP_8XX__ +#define __IMMAP_8XX__ + +/* System configuration registers. +*/ +typedef struct sys_conf { + uint sc_siumcr; + uint sc_sypcr; + uint sc_swt; + char res1[2]; + ushort sc_swsr; + uint sc_sipend; + uint sc_simask; + uint sc_siel; + uint sc_sivec; + uint sc_tesr; + char res2[0xc]; + uint sc_sdcr; + char res3[0x4c]; +} sysconf8xx_t; + +/* PCMCIA configuration registers. +*/ +typedef struct pcmcia_conf { + uint pcmc_pbr0; + uint pcmc_por0; + uint pcmc_pbr1; + uint pcmc_por1; + uint pcmc_pbr2; + uint pcmc_por2; + uint pcmc_pbr3; + uint pcmc_por3; + uint pcmc_pbr4; + uint pcmc_por4; + uint pcmc_pbr5; + uint pcmc_por5; + uint pcmc_pbr6; + uint pcmc_por6; + uint pcmc_pbr7; + uint pcmc_por7; + char res1[0x20]; + uint pcmc_pgcra; + uint pcmc_pgcrb; + uint pcmc_pscr; + char res2[4]; + uint pcmc_pipr; + char res3[4]; + uint pcmc_per; + char res4[4]; +} pcmconf8xx_t; + +/* Memory controller registers. +*/ +typedef struct mem_ctlr { + uint memc_br0; + uint memc_or0; + uint memc_br1; + uint memc_or1; + uint memc_br2; + uint memc_or2; + uint memc_br3; + uint memc_or3; + uint memc_br4; + uint memc_or4; + uint memc_br5; + uint memc_or5; + uint memc_br6; + uint memc_or6; + uint memc_br7; + uint memc_or7; + char res1[0x24]; + uint memc_mar; + uint memc_mcr; + char res2[4]; + uint memc_mamr; + uint memc_mbmr; + ushort memc_mstat; + ushort memc_mptpr; + uint memc_mdr; + char res3[0x80]; +} memctl8xx_t; + +/*----------------------------------------------------------------------- + * BR - Memory Controler: Base Register 16-9 + */ +#define BR_BA_MSK 0xffff8000 /* Base Address Mask */ +#define BR_AT_MSK 0x00007000 /* Address Type Mask */ +#define BR_PS_MSK 0x00000c00 /* Port Size Mask */ +#define BR_PS_32 0x00000000 /* 32 bit port size */ +#define BR_PS_16 0x00000800 /* 16 bit port size */ +#define BR_PS_8 0x00000400 /* 8 bit port size */ +#define BR_PARE 0x00000200 /* Parity Enable */ +#define BR_WP 0x00000100 /* Write Protect */ +#define BR_MS_MSK 0x000000c0 /* Machine Select Mask */ +#define BR_MS_GPCM 0x00000000 /* G.P.C.M. Machine Select */ +#define BR_MS_UPMA 0x00000080 /* U.P.M.A Machine Select */ +#define BR_MS_UPMB 0x000000c0 /* U.P.M.B Machine Select */ +#define BR_V 0x00000001 /* Bank Valid */ + +/*----------------------------------------------------------------------- + * OR - Memory Controler: Option Register 16-11 + */ +#define OR_AM_MSK 0xffff8000 /* Address Mask Mask */ +#define OR_ATM_MSK 0x00007000 /* Address Type Mask Mask */ +#define OR_CSNT_SAM 0x00000800 /* Chip Select Negation Time/ Start */ + /* Address Multiplex */ +#define OR_ACS_MSK 0x00000600 /* Address to Chip Select Setup mask */ +#define OR_ACS_DIV1 0x00000000 /* CS is output at the same time */ +#define OR_ACS_DIV4 0x00000400 /* CS is output 1/4 a clock later */ +#define OR_ACS_DIV2 0x00000600 /* CS is output 1/2 a clock later */ +#define OR_G5LA 0x00000400 /* Output #GPL5 on #GPL_A5 */ +#define OR_G5LS 0x00000200 /* Drive #GPL high on falling edge of...*/ +#define OR_BI 0x00000100 /* Burst inhibit */ +#define OR_SCY_MSK 0x000000f0 /* Cycle Lenght in Clocks */ +#define OR_SCY_0_CLK 0x00000000 /* 0 clock cycles wait states */ +#define OR_SCY_1_CLK 0x00000010 /* 1 clock cycles wait states */ +#define OR_SCY_2_CLK 0x00000020 /* 2 clock cycles wait states */ +#define OR_SCY_3_CLK 0x00000030 /* 3 clock cycles wait states */ +#define OR_SCY_4_CLK 0x00000040 /* 4 clock cycles wait states */ +#define OR_SCY_5_CLK 0x00000050 /* 5 clock cycles wait states */ +#define OR_SCY_6_CLK 0x00000060 /* 6 clock cycles wait states */ +#define OR_SCY_7_CLK 0x00000070 /* 7 clock cycles wait states */ +#define OR_SCY_8_CLK 0x00000080 /* 8 clock cycles wait states */ +#define OR_SCY_9_CLK 0x00000090 /* 9 clock cycles wait states */ +#define OR_SCY_10_CLK 0x000000a0 /* 10 clock cycles wait states */ +#define OR_SCY_11_CLK 0x000000b0 /* 11 clock cycles wait states */ +#define OR_SCY_12_CLK 0x000000c0 /* 12 clock cycles wait states */ +#define OR_SCY_13_CLK 0x000000d0 /* 13 clock cycles wait states */ +#define OR_SCY_14_CLK 0x000000e0 /* 14 clock cycles wait states */ +#define OR_SCY_15_CLK 0x000000f0 /* 15 clock cycles wait states */ +#define OR_SETA 0x00000008 /* External Transfer Acknowledge */ +#define OR_TRLX 0x00000004 /* Timing Relaxed */ +#define OR_EHTR 0x00000002 /* Extended Hold Time on Read */ + +/* System Integration Timers. +*/ +typedef struct sys_int_timers { + ushort sit_tbscr; + char res0[0x02]; + uint sit_tbreff0; + uint sit_tbreff1; + char res1[0x14]; + ushort sit_rtcsc; + char res2[0x02]; + uint sit_rtc; + uint sit_rtsec; + uint sit_rtcal; + char res3[0x10]; + ushort sit_piscr; + char res4[2]; + uint sit_pitc; + uint sit_pitr; + char res5[0x34]; +} sit8xx_t; + +#define TBSCR_TBIRQ_MASK ((ushort)0xff00) +#define TBSCR_REFA ((ushort)0x0080) +#define TBSCR_REFB ((ushort)0x0040) +#define TBSCR_REFAE ((ushort)0x0008) +#define TBSCR_REFBE ((ushort)0x0004) +#define TBSCR_TBF ((ushort)0x0002) +#define TBSCR_TBE ((ushort)0x0001) + +#define RTCSC_RTCIRQ_MASK ((ushort)0xff00) +#define RTCSC_SEC ((ushort)0x0080) +#define RTCSC_ALR ((ushort)0x0040) +#define RTCSC_38K ((ushort)0x0010) +#define RTCSC_SIE ((ushort)0x0008) +#define RTCSC_ALE ((ushort)0x0004) +#define RTCSC_RTF ((ushort)0x0002) +#define RTCSC_RTE ((ushort)0x0001) + +#define PISCR_PIRQ_MASK ((ushort)0xff00) +#define PISCR_PS ((ushort)0x0080) +#define PISCR_PIE ((ushort)0x0004) +#define PISCR_PTF ((ushort)0x0002) +#define PISCR_PTE ((ushort)0x0001) + +/* Clocks and Reset. +*/ +typedef struct clk_and_reset { + uint car_sccr; + uint car_plprcr; + uint car_rsr; + char res[0x74]; /* Reserved area */ +} car8xx_t; + +/* System Integration Timers keys. +*/ +typedef struct sitk { + uint sitk_tbscrk; + uint sitk_tbreff0k; + uint sitk_tbreff1k; + uint sitk_tbk; + char res1[0x10]; + uint sitk_rtcsck; + uint sitk_rtck; + uint sitk_rtseck; + uint sitk_rtcalk; + char res2[0x10]; + uint sitk_piscrk; + uint sitk_pitck; + char res3[0x38]; +} sitk8xx_t; + +/* Clocks and reset keys. +*/ +typedef struct cark { + uint cark_sccrk; + uint cark_plprcrk; + uint cark_rsrk; + char res[0x474]; +} cark8xx_t; + +/* The key to unlock registers maintained by keep-alive power. +*/ +#define KAPWR_KEY ((unsigned int)0x55ccaa33) + +/* Video interface. MPC823 Only. +*/ +typedef struct vid823 { + ushort vid_vccr; + ushort res1; + u_char vid_vsr; + u_char res2; + u_char vid_vcmr; + u_char res3; + uint vid_vbcb; + uint res4; + uint vid_vfcr0; + uint vid_vfaa0; + uint vid_vfba0; + uint vid_vfcr1; + uint vid_vfaa1; + uint vid_vfba1; + u_char res5[0x18]; +} vid823_t; + +/* LCD interface. 823 Only. +*/ +typedef struct lcd { + uint lcd_lccr; + uint lcd_lchcr; + uint lcd_lcvcr; + char res1[4]; + uint lcd_lcfaa; + uint lcd_lcfba; + char lcd_lcsr; + char res2[0x7]; +} lcd823_t; + +/* I2C +*/ +typedef struct i2c { + u_char i2c_i2mod; + char res1[3]; + u_char i2c_i2add; + char res2[3]; + u_char i2c_i2brg; + char res3[3]; + u_char i2c_i2com; + char res4[3]; + u_char i2c_i2cer; + char res5[3]; + u_char i2c_i2cmr; + char res6[0x8b]; +} i2c8xx_t; + +/* DMA control/status registers. +*/ +typedef struct sdma_csr { + char res1[4]; + uint sdma_sdar; + u_char sdma_sdsr; + char res3[3]; + u_char sdma_sdmr; + char res4[3]; + u_char sdma_idsr1; + char res5[3]; + u_char sdma_idmr1; + char res6[3]; + u_char sdma_idsr2; + char res7[3]; + u_char sdma_idmr2; + char res8[0x13]; +} sdma8xx_t; + +/* Communication Processor Module Interrupt Controller. +*/ +typedef struct cpm_ic { + ushort cpic_civr; + char res[0xe]; + uint cpic_cicr; + uint cpic_cipr; + uint cpic_cimr; + uint cpic_cisr; +} cpic8xx_t; + +/* Input/Output Port control/status registers. +*/ +typedef struct io_port { + ushort iop_padir; + ushort iop_papar; + ushort iop_paodr; + ushort iop_padat; + char res1[8]; + ushort iop_pcdir; + ushort iop_pcpar; + ushort iop_pcso; + ushort iop_pcdat; + ushort iop_pcint; + char res2[6]; + ushort iop_pddir; + ushort iop_pdpar; + char res3[2]; + ushort iop_pddat; + uint utmode; + char res4[4]; +} iop8xx_t; + +/* Communication Processor Module Timers +*/ +typedef struct cpm_timers { + ushort cpmt_tgcr; + char res1[0xe]; + ushort cpmt_tmr1; + ushort cpmt_tmr2; + ushort cpmt_trr1; + ushort cpmt_trr2; + ushort cpmt_tcr1; + ushort cpmt_tcr2; + ushort cpmt_tcn1; + ushort cpmt_tcn2; + ushort cpmt_tmr3; + ushort cpmt_tmr4; + ushort cpmt_trr3; + ushort cpmt_trr4; + ushort cpmt_tcr3; + ushort cpmt_tcr4; + ushort cpmt_tcn3; + ushort cpmt_tcn4; + ushort cpmt_ter1; + ushort cpmt_ter2; + ushort cpmt_ter3; + ushort cpmt_ter4; + char res2[8]; +} cpmtimer8xx_t; + +/* Finally, the Communication Processor stuff..... +*/ +typedef struct scc { /* Serial communication channels */ + uint scc_gsmrl; + uint scc_gsmrh; + ushort scc_psmr; + char res1[2]; + ushort scc_todr; + ushort scc_dsr; + ushort scc_scce; + char res2[2]; + ushort scc_sccm; + char res3; + u_char scc_sccs; + char res4[8]; +} scc_t; + +typedef struct smc { /* Serial management channels */ + char res1[2]; + ushort smc_smcmr; + char res2[2]; + u_char smc_smce; + char res3[3]; + u_char smc_smcm; + char res4[5]; +} smc_t; + +/* MPC860T Fast Ethernet Controller. It isn't part of the CPM, but + * it fits within the address space. + */ + +typedef struct fec { + uint fec_addr_low; /* lower 32 bits of station address */ + ushort fec_addr_high; /* upper 16 bits of station address */ + ushort res1; /* reserved */ + uint fec_hash_table_high; /* upper 32-bits of hash table */ + uint fec_hash_table_low; /* lower 32-bits of hash table */ + uint fec_r_des_start; /* beginning of Rx descriptor ring */ + uint fec_x_des_start; /* beginning of Tx descriptor ring */ + uint fec_r_buff_size; /* Rx buffer size */ + uint res2[9]; /* reserved */ + uint fec_ecntrl; /* ethernet control register */ + uint fec_ievent; /* interrupt event register */ + uint fec_imask; /* interrupt mask register */ + uint fec_ivec; /* interrupt level and vector status */ + uint fec_r_des_active; /* Rx ring updated flag */ + uint fec_x_des_active; /* Tx ring updated flag */ + uint res3[10]; /* reserved */ + uint fec_mii_data; /* MII data register */ + uint fec_mii_speed; /* MII speed control register */ + uint res4[17]; /* reserved */ + uint fec_r_bound; /* end of RAM (read-only) */ + uint fec_r_fstart; /* Rx FIFO start address */ + uint res5[6]; /* reserved */ + uint fec_x_fstart; /* Tx FIFO start address */ + uint res6[17]; /* reserved */ + uint fec_fun_code; /* fec SDMA function code */ + uint res7[3]; /* reserved */ + uint fec_r_cntrl; /* Rx control register */ + uint fec_r_hash; /* Rx hash register */ + uint res8[14]; /* reserved */ + uint fec_x_cntrl; /* Tx control register */ + uint res9[0x1e]; /* reserved */ +} fec_t; + +/* The FEC and LCD color map share the same address space.... + * I guess we will never see an 823T :-). + */ +union fec_lcd { + fec_t fl_un_fec; + u_char fl_un_cmap[0x200]; +}; + +typedef struct comm_proc { + /* General control and status registers. + */ + ushort cp_cpcr; + u_char res1[2]; + ushort cp_rccr; + u_char res2; + u_char cp_rmds; + u_char res3[4]; + ushort cp_cpmcr1; + ushort cp_cpmcr2; + ushort cp_cpmcr3; + ushort cp_cpmcr4; + u_char res4[2]; + ushort cp_rter; + u_char res5[2]; + ushort cp_rtmr; + u_char res6[0x14]; + + /* Baud rate generators. + */ + uint cp_brgc1; + uint cp_brgc2; + uint cp_brgc3; + uint cp_brgc4; + + /* Serial Communication Channels. + */ + scc_t cp_scc[4]; + + /* Serial Management Channels. + */ + smc_t cp_smc[2]; + + /* Serial Peripheral Interface. + */ + ushort cp_spmode; + u_char res7[4]; + u_char cp_spie; + u_char res8[3]; + u_char cp_spim; + u_char res9[2]; + u_char cp_spcom; + u_char res10[2]; + + /* Parallel Interface Port. + */ + u_char res11[2]; + ushort cp_pipc; + u_char res12[2]; + ushort cp_ptpr; + uint cp_pbdir; + uint cp_pbpar; + u_char res13[2]; + ushort cp_pbodr; + uint cp_pbdat; + + /* Port E - MPC87x/88x only. + */ + uint cp_pedir; + uint cp_pepar; + uint cp_peso; + uint cp_peodr; + uint cp_pedat; + + /* Communications Processor Timing Register - + Contains RMII Timing for the FECs on MPC87x/88x only. + */ + uint cp_cptr; + + /* Serial Interface and Time Slot Assignment. + */ + uint cp_simode; + u_char cp_sigmr; + u_char res15; + u_char cp_sistr; + u_char cp_sicmr; + u_char res16[4]; + uint cp_sicr; + uint cp_sirp; + u_char res17[0xc]; + + /* 256 bytes of MPC823 video controller RAM array. + */ + u_char cp_vcram[0x100]; + u_char cp_siram[0x200]; + + /* The fast ethernet controller is not really part of the CPM, + * but it resides in the address space. + * The LCD color map is also here. + */ + union fec_lcd fl_un; +#define cp_fec fl_un.fl_un_fec +#define lcd_cmap fl_un.fl_un_cmap + char res18[0xE00]; + + /* The DUET family has a second FEC here */ + fec_t cp_fec2; +#define cp_fec1 cp_fec /* consistency macro */ + + /* Dual Ported RAM follows. + * There are many different formats for this memory area + * depending upon the devices used and options chosen. + * Some processors don't have all of it populated. + */ + u_char cp_dpmem[0x1C00]; /* BD / Data / ucode */ + u_char cp_dparam[0x400]; /* Parameter RAM */ +} cpm8xx_t; + +/* Internal memory map. +*/ +typedef struct immap { + sysconf8xx_t im_siu_conf; /* SIU Configuration */ + pcmconf8xx_t im_pcmcia; /* PCMCIA Configuration */ + memctl8xx_t im_memctl; /* Memory Controller */ + sit8xx_t im_sit; /* System integration timers */ + car8xx_t im_clkrst; /* Clocks and reset */ + sitk8xx_t im_sitk; /* Sys int timer keys */ + cark8xx_t im_clkrstk; /* Clocks and reset keys */ + vid823_t im_vid; /* Video (823 only) */ + lcd823_t im_lcd; /* LCD (823 only) */ + i2c8xx_t im_i2c; /* I2C control/status */ + sdma8xx_t im_sdma; /* SDMA control/status */ + cpic8xx_t im_cpic; /* CPM Interrupt Controller */ + iop8xx_t im_ioport; /* IO Port control/status */ + cpmtimer8xx_t im_cpmtimer; /* CPM timers */ + cpm8xx_t im_cpm; /* Communication processor */ +} immap_t; + +#endif /* __IMMAP_8XX__ */ +#endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/atomic.h b/include/asm-powerpc/atomic.h index c44810b9d32..f3fc733758f 100644 --- a/include/asm-powerpc/atomic.h +++ b/include/asm-powerpc/atomic.h @@ -5,7 +5,7 @@ * PowerPC atomic operations */ -typedef struct { volatile int counter; } atomic_t; +typedef struct { int counter; } atomic_t; #ifdef __KERNEL__ #include <linux/compiler.h> @@ -15,8 +15,19 @@ typedef struct { volatile int counter; } atomic_t; #define ATOMIC_INIT(i) { (i) } -#define atomic_read(v) ((v)->counter) -#define atomic_set(v,i) (((v)->counter) = (i)) +static __inline__ int atomic_read(const atomic_t *v) +{ + int t; + + __asm__ __volatile__("lwz%U1%X1 %0,%1" : "=r"(t) : "m"(v->counter)); + + return t; +} + +static __inline__ void atomic_set(atomic_t *v, int i) +{ + __asm__ __volatile__("stw%U0%X0 %1,%0" : "=m"(v->counter) : "r"(i)); +} static __inline__ void atomic_add(int a, atomic_t *v) { @@ -240,12 +251,23 @@ static __inline__ int atomic_dec_if_positive(atomic_t *v) #ifdef __powerpc64__ -typedef struct { volatile long counter; } atomic64_t; +typedef struct { long counter; } atomic64_t; #define ATOMIC64_INIT(i) { (i) } -#define atomic64_read(v) ((v)->counter) -#define atomic64_set(v,i) (((v)->counter) = (i)) +static __inline__ long atomic64_read(const atomic64_t *v) +{ + long t; + + __asm__ __volatile__("ld%U1%X1 %0,%1" : "=r"(t) : "m"(v->counter)); + + return t; +} + +static __inline__ void atomic64_set(atomic64_t *v, long i) +{ + __asm__ __volatile__("std%U0%X0 %1,%0" : "=m"(v->counter) : "r"(i)); +} static __inline__ void atomic64_add(long a, atomic64_t *v) { diff --git a/include/asm-powerpc/cell-regs.h b/include/asm-powerpc/cell-regs.h new file mode 100644 index 00000000000..fd6fd00434e --- /dev/null +++ b/include/asm-powerpc/cell-regs.h @@ -0,0 +1,315 @@ +/* + * cbe_regs.h + * + * This file is intended to hold the various register definitions for CBE + * on-chip system devices (memory controller, IO controller, etc...) + * + * (C) Copyright IBM Corporation 2001,2006 + * + * Authors: Maximino Aguilar (maguilar@us.ibm.com) + * David J. Erb (djerb@us.ibm.com) + * + * (c) 2006 Benjamin Herrenschmidt <benh@kernel.crashing.org>, IBM Corp. + */ + +#ifndef CBE_REGS_H +#define CBE_REGS_H + +#include <asm/cell-pmu.h> + +/* + * + * Some HID register definitions + * + */ + +/* CBE specific HID0 bits */ +#define HID0_CBE_THERM_WAKEUP 0x0000020000000000ul +#define HID0_CBE_SYSERR_WAKEUP 0x0000008000000000ul +#define HID0_CBE_THERM_INT_EN 0x0000000400000000ul +#define HID0_CBE_SYSERR_INT_EN 0x0000000200000000ul + +#define MAX_CBE 2 + +/* + * + * Pervasive unit register definitions + * + */ + +union spe_reg { + u64 val; + u8 spe[8]; +}; + +union ppe_spe_reg { + u64 val; + struct { + u32 ppe; + u32 spe; + }; +}; + + +struct cbe_pmd_regs { + /* Debug Bus Control */ + u64 pad_0x0000; /* 0x0000 */ + + u64 group_control; /* 0x0008 */ + + u8 pad_0x0010_0x00a8 [0x00a8 - 0x0010]; /* 0x0010 */ + + u64 debug_bus_control; /* 0x00a8 */ + + u8 pad_0x00b0_0x0100 [0x0100 - 0x00b0]; /* 0x00b0 */ + + u64 trace_aux_data; /* 0x0100 */ + u64 trace_buffer_0_63; /* 0x0108 */ + u64 trace_buffer_64_127; /* 0x0110 */ + u64 trace_address; /* 0x0118 */ + u64 ext_tr_timer; /* 0x0120 */ + + u8 pad_0x0128_0x0400 [0x0400 - 0x0128]; /* 0x0128 */ + + /* Performance Monitor */ + u64 pm_status; /* 0x0400 */ + u64 pm_control; /* 0x0408 */ + u64 pm_interval; /* 0x0410 */ + u64 pm_ctr[4]; /* 0x0418 */ + u64 pm_start_stop; /* 0x0438 */ + u64 pm07_control[8]; /* 0x0440 */ + + u8 pad_0x0480_0x0800 [0x0800 - 0x0480]; /* 0x0480 */ + + /* Thermal Sensor Registers */ + union spe_reg ts_ctsr1; /* 0x0800 */ + u64 ts_ctsr2; /* 0x0808 */ + union spe_reg ts_mtsr1; /* 0x0810 */ + u64 ts_mtsr2; /* 0x0818 */ + union spe_reg ts_itr1; /* 0x0820 */ + u64 ts_itr2; /* 0x0828 */ + u64 ts_gitr; /* 0x0830 */ + u64 ts_isr; /* 0x0838 */ + u64 ts_imr; /* 0x0840 */ + union spe_reg tm_cr1; /* 0x0848 */ + u64 tm_cr2; /* 0x0850 */ + u64 tm_simr; /* 0x0858 */ + union ppe_spe_reg tm_tpr; /* 0x0860 */ + union spe_reg tm_str1; /* 0x0868 */ + u64 tm_str2; /* 0x0870 */ + union ppe_spe_reg tm_tsr; /* 0x0878 */ + + /* Power Management */ + u64 pmcr; /* 0x0880 */ +#define CBE_PMD_PAUSE_ZERO_CONTROL 0x10000 + u64 pmsr; /* 0x0888 */ + + /* Time Base Register */ + u64 tbr; /* 0x0890 */ + + u8 pad_0x0898_0x0c00 [0x0c00 - 0x0898]; /* 0x0898 */ + + /* Fault Isolation Registers */ + u64 checkstop_fir; /* 0x0c00 */ + u64 recoverable_fir; /* 0x0c08 */ + u64 spec_att_mchk_fir; /* 0x0c10 */ + u32 fir_mode_reg; /* 0x0c18 */ + u8 pad_0x0c1c_0x0c20 [4]; /* 0x0c1c */ +#define CBE_PMD_FIR_MODE_M8 0x00800 + u64 fir_enable_mask; /* 0x0c20 */ + + u8 pad_0x0c28_0x0ca8 [0x0ca8 - 0x0c28]; /* 0x0c28 */ + u64 ras_esc_0; /* 0x0ca8 */ + u8 pad_0x0cb0_0x1000 [0x1000 - 0x0cb0]; /* 0x0cb0 */ +}; + +extern struct cbe_pmd_regs __iomem *cbe_get_pmd_regs(struct device_node *np); +extern struct cbe_pmd_regs __iomem *cbe_get_cpu_pmd_regs(int cpu); + +/* + * PMU shadow registers + * + * Many of the registers in the performance monitoring unit are write-only, + * so we need to save a copy of what we write to those registers. + * + * The actual data counters are read/write. However, writing to the counters + * only takes effect if the PMU is enabled. Otherwise the value is stored in + * a hardware latch until the next time the PMU is enabled. So we save a copy + * of the counter values if we need to read them back while the PMU is + * disabled. The counter_value_in_latch field is a bitmap indicating which + * counters currently have a value waiting to be written. + */ + +struct cbe_pmd_shadow_regs { + u32 group_control; + u32 debug_bus_control; + u32 trace_address; + u32 ext_tr_timer; + u32 pm_status; + u32 pm_control; + u32 pm_interval; + u32 pm_start_stop; + u32 pm07_control[NR_CTRS]; + + u32 pm_ctr[NR_PHYS_CTRS]; + u32 counter_value_in_latch; +}; + +extern struct cbe_pmd_shadow_regs *cbe_get_pmd_shadow_regs(struct device_node *np); +extern struct cbe_pmd_shadow_regs *cbe_get_cpu_pmd_shadow_regs(int cpu); + +/* + * + * IIC unit register definitions + * + */ + +struct cbe_iic_pending_bits { + u32 data; + u8 flags; + u8 class; + u8 source; + u8 prio; +}; + +#define CBE_IIC_IRQ_VALID 0x80 +#define CBE_IIC_IRQ_IPI 0x40 + +struct cbe_iic_thread_regs { + struct cbe_iic_pending_bits pending; + struct cbe_iic_pending_bits pending_destr; + u64 generate; + u64 prio; +}; + +struct cbe_iic_regs { + u8 pad_0x0000_0x0400[0x0400 - 0x0000]; /* 0x0000 */ + + /* IIC interrupt registers */ + struct cbe_iic_thread_regs thread[2]; /* 0x0400 */ + + u64 iic_ir; /* 0x0440 */ +#define CBE_IIC_IR_PRIO(x) (((x) & 0xf) << 12) +#define CBE_IIC_IR_DEST_NODE(x) (((x) & 0xf) << 4) +#define CBE_IIC_IR_DEST_UNIT(x) ((x) & 0xf) +#define CBE_IIC_IR_IOC_0 0x0 +#define CBE_IIC_IR_IOC_1S 0xb +#define CBE_IIC_IR_PT_0 0xe +#define CBE_IIC_IR_PT_1 0xf + + u64 iic_is; /* 0x0448 */ +#define CBE_IIC_IS_PMI 0x2 + + u8 pad_0x0450_0x0500[0x0500 - 0x0450]; /* 0x0450 */ + + /* IOC FIR */ + u64 ioc_fir_reset; /* 0x0500 */ + u64 ioc_fir_set; /* 0x0508 */ + u64 ioc_checkstop_enable; /* 0x0510 */ + u64 ioc_fir_error_mask; /* 0x0518 */ + u64 ioc_syserr_enable; /* 0x0520 */ + u64 ioc_fir; /* 0x0528 */ + + u8 pad_0x0530_0x1000[0x1000 - 0x0530]; /* 0x0530 */ +}; + +extern struct cbe_iic_regs __iomem *cbe_get_iic_regs(struct device_node *np); +extern struct cbe_iic_regs __iomem *cbe_get_cpu_iic_regs(int cpu); + + +struct cbe_mic_tm_regs { + u8 pad_0x0000_0x0040[0x0040 - 0x0000]; /* 0x0000 */ + + u64 mic_ctl_cnfg2; /* 0x0040 */ +#define CBE_MIC_ENABLE_AUX_TRC 0x8000000000000000LL +#define CBE_MIC_DISABLE_PWR_SAV_2 0x0200000000000000LL +#define CBE_MIC_DISABLE_AUX_TRC_WRAP 0x0100000000000000LL +#define CBE_MIC_ENABLE_AUX_TRC_INT 0x0080000000000000LL + + u64 pad_0x0048; /* 0x0048 */ + + u64 mic_aux_trc_base; /* 0x0050 */ + u64 mic_aux_trc_max_addr; /* 0x0058 */ + u64 mic_aux_trc_cur_addr; /* 0x0060 */ + u64 mic_aux_trc_grf_addr; /* 0x0068 */ + u64 mic_aux_trc_grf_data; /* 0x0070 */ + + u64 pad_0x0078; /* 0x0078 */ + + u64 mic_ctl_cnfg_0; /* 0x0080 */ +#define CBE_MIC_DISABLE_PWR_SAV_0 0x8000000000000000LL + + u64 pad_0x0088; /* 0x0088 */ + + u64 slow_fast_timer_0; /* 0x0090 */ + u64 slow_next_timer_0; /* 0x0098 */ + + u8 pad_0x00a0_0x00f8[0x00f8 - 0x00a0]; /* 0x00a0 */ + u64 mic_df_ecc_address_0; /* 0x00f8 */ + + u8 pad_0x0100_0x01b8[0x01b8 - 0x0100]; /* 0x0100 */ + u64 mic_df_ecc_address_1; /* 0x01b8 */ + + u64 mic_ctl_cnfg_1; /* 0x01c0 */ +#define CBE_MIC_DISABLE_PWR_SAV_1 0x8000000000000000LL + + u64 pad_0x01c8; /* 0x01c8 */ + + u64 slow_fast_timer_1; /* 0x01d0 */ + u64 slow_next_timer_1; /* 0x01d8 */ + + u8 pad_0x01e0_0x0208[0x0208 - 0x01e0]; /* 0x01e0 */ + u64 mic_exc; /* 0x0208 */ +#define CBE_MIC_EXC_BLOCK_SCRUB 0x0800000000000000ULL +#define CBE_MIC_EXC_FAST_SCRUB 0x0100000000000000ULL + + u64 mic_mnt_cfg; /* 0x0210 */ +#define CBE_MIC_MNT_CFG_CHAN_0_POP 0x0002000000000000ULL +#define CBE_MIC_MNT_CFG_CHAN_1_POP 0x0004000000000000ULL + + u64 mic_df_config; /* 0x0218 */ +#define CBE_MIC_ECC_DISABLE_0 0x4000000000000000ULL +#define CBE_MIC_ECC_REP_SINGLE_0 0x2000000000000000ULL +#define CBE_MIC_ECC_DISABLE_1 0x0080000000000000ULL +#define CBE_MIC_ECC_REP_SINGLE_1 0x0040000000000000ULL + + u8 pad_0x0220_0x0230[0x0230 - 0x0220]; /* 0x0220 */ + u64 mic_fir; /* 0x0230 */ +#define CBE_MIC_FIR_ECC_SINGLE_0_ERR 0x0200000000000000ULL +#define CBE_MIC_FIR_ECC_MULTI_0_ERR 0x0100000000000000ULL +#define CBE_MIC_FIR_ECC_SINGLE_1_ERR 0x0080000000000000ULL +#define CBE_MIC_FIR_ECC_MULTI_1_ERR 0x0040000000000000ULL +#define CBE_MIC_FIR_ECC_ERR_MASK 0xffff000000000000ULL +#define CBE_MIC_FIR_ECC_SINGLE_0_CTE 0x0000020000000000ULL +#define CBE_MIC_FIR_ECC_MULTI_0_CTE 0x0000010000000000ULL +#define CBE_MIC_FIR_ECC_SINGLE_1_CTE 0x0000008000000000ULL +#define CBE_MIC_FIR_ECC_MULTI_1_CTE 0x0000004000000000ULL +#define CBE_MIC_FIR_ECC_CTE_MASK 0x0000ffff00000000ULL +#define CBE_MIC_FIR_ECC_SINGLE_0_RESET 0x0000000002000000ULL +#define CBE_MIC_FIR_ECC_MULTI_0_RESET 0x0000000001000000ULL +#define CBE_MIC_FIR_ECC_SINGLE_1_RESET 0x0000000000800000ULL +#define CBE_MIC_FIR_ECC_MULTI_1_RESET 0x0000000000400000ULL +#define CBE_MIC_FIR_ECC_RESET_MASK 0x00000000ffff0000ULL +#define CBE_MIC_FIR_ECC_SINGLE_0_SET 0x0000000000000200ULL +#define CBE_MIC_FIR_ECC_MULTI_0_SET 0x0000000000000100ULL +#define CBE_MIC_FIR_ECC_SINGLE_1_SET 0x0000000000000080ULL +#define CBE_MIC_FIR_ECC_MULTI_1_SET 0x0000000000000040ULL +#define CBE_MIC_FIR_ECC_SET_MASK 0x000000000000ffffULL + u64 mic_fir_debug; /* 0x0238 */ + + u8 pad_0x0240_0x1000[0x1000 - 0x0240]; /* 0x0240 */ +}; + +extern struct cbe_mic_tm_regs __iomem *cbe_get_mic_tm_regs(struct device_node *np); +extern struct cbe_mic_tm_regs __iomem *cbe_get_cpu_mic_tm_regs(int cpu); + +/* some utility functions to deal with SMT */ +extern u32 cbe_get_hw_thread_id(int cpu); +extern u32 cbe_cpu_to_node(int cpu); +extern u32 cbe_node_to_cpu(int node); + +/* Init this module early */ +extern void cbe_regs_init(void); + + +#endif /* CBE_REGS_H */ diff --git a/include/asm-powerpc/clk_interface.h b/include/asm-powerpc/clk_interface.h new file mode 100644 index 00000000000..ab1882c1e17 --- /dev/null +++ b/include/asm-powerpc/clk_interface.h @@ -0,0 +1,20 @@ +#ifndef __ASM_POWERPC_CLK_INTERFACE_H +#define __ASM_POWERPC_CLK_INTERFACE_H + +#include <linux/clk.h> + +struct clk_interface { + struct clk* (*clk_get) (struct device *dev, const char *id); + int (*clk_enable) (struct clk *clk); + void (*clk_disable) (struct clk *clk); + unsigned long (*clk_get_rate) (struct clk *clk); + void (*clk_put) (struct clk *clk); + long (*clk_round_rate) (struct clk *clk, unsigned long rate); + int (*clk_set_rate) (struct clk *clk, unsigned long rate); + int (*clk_set_parent) (struct clk *clk, struct clk *parent); + struct clk* (*clk_get_parent) (struct clk *clk); +}; + +extern struct clk_interface clk_functions; + +#endif /* __ASM_POWERPC_CLK_INTERFACE_H */ diff --git a/include/asm-powerpc/commproc.h b/include/asm-powerpc/commproc.h new file mode 100644 index 00000000000..0307c84a5c1 --- /dev/null +++ b/include/asm-powerpc/commproc.h @@ -0,0 +1,755 @@ +/* + * MPC8xx Communication Processor Module. + * Copyright (c) 1997 Dan Malek (dmalek@jlc.net) + * + * This file contains structures and information for the communication + * processor channels. Some CPM control and status is available + * throught the MPC8xx internal memory map. See immap.h for details. + * This file only contains what I need for the moment, not the total + * CPM capabilities. I (or someone else) will add definitions as they + * are needed. -- Dan + * + * On the MBX board, EPPC-Bug loads CPM microcode into the first 512 + * bytes of the DP RAM and relocates the I2C parameter area to the + * IDMA1 space. The remaining DP RAM is available for buffer descriptors + * or other use. + */ +#ifndef __CPM_8XX__ +#define __CPM_8XX__ + +#include <asm/8xx_immap.h> +#include <asm/ptrace.h> +#include <asm/cpm.h> + +/* CPM Command register. +*/ +#define CPM_CR_RST ((ushort)0x8000) +#define CPM_CR_OPCODE ((ushort)0x0f00) +#define CPM_CR_CHAN ((ushort)0x00f0) +#define CPM_CR_FLG ((ushort)0x0001) + +/* Some commands (there are more...later) +*/ +#define CPM_CR_INIT_TRX ((ushort)0x0000) +#define CPM_CR_INIT_RX ((ushort)0x0001) +#define CPM_CR_INIT_TX ((ushort)0x0002) +#define CPM_CR_HUNT_MODE ((ushort)0x0003) +#define CPM_CR_STOP_TX ((ushort)0x0004) +#define CPM_CR_GRA_STOP_TX ((ushort)0x0005) +#define CPM_CR_RESTART_TX ((ushort)0x0006) +#define CPM_CR_CLOSE_RX_BD ((ushort)0x0007) +#define CPM_CR_SET_GADDR ((ushort)0x0008) +#define CPM_CR_SET_TIMER CPM_CR_SET_GADDR + +/* Channel numbers. +*/ +#define CPM_CR_CH_SCC1 ((ushort)0x0000) +#define CPM_CR_CH_I2C ((ushort)0x0001) /* I2C and IDMA1 */ +#define CPM_CR_CH_SCC2 ((ushort)0x0004) +#define CPM_CR_CH_SPI ((ushort)0x0005) /* SPI / IDMA2 / Timers */ +#define CPM_CR_CH_TIMER CPM_CR_CH_SPI +#define CPM_CR_CH_SCC3 ((ushort)0x0008) +#define CPM_CR_CH_SMC1 ((ushort)0x0009) /* SMC1 / DSP1 */ +#define CPM_CR_CH_SCC4 ((ushort)0x000c) +#define CPM_CR_CH_SMC2 ((ushort)0x000d) /* SMC2 / DSP2 */ + +#define mk_cr_cmd(CH, CMD) ((CMD << 8) | (CH << 4)) + +#ifndef CONFIG_PPC_CPM_NEW_BINDING +/* The dual ported RAM is multi-functional. Some areas can be (and are + * being) used for microcode. There is an area that can only be used + * as data ram for buffer descriptors, which is all we use right now. + * Currently the first 512 and last 256 bytes are used for microcode. + */ +#define CPM_DATAONLY_BASE ((uint)0x0800) +#define CPM_DATAONLY_SIZE ((uint)0x0700) +#define CPM_DP_NOSPACE ((uint)0x7fffffff) +#endif + +/* Export the base address of the communication processor registers + * and dual port ram. + */ +extern cpm8xx_t __iomem *cpmp; /* Pointer to comm processor */ + +#ifdef CONFIG_PPC_CPM_NEW_BINDING +#define cpm_dpalloc cpm_muram_alloc +#define cpm_dpfree cpm_muram_free +#define cpm_dpram_addr cpm_muram_addr +#define cpm_dpram_phys cpm_muram_dma +#else +extern unsigned long cpm_dpalloc(uint size, uint align); +extern int cpm_dpfree(unsigned long offset); +extern unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align); +extern void cpm_dpdump(void); +extern void *cpm_dpram_addr(unsigned long offset); +extern uint cpm_dpram_phys(u8* addr); +#endif + +extern void cpm_setbrg(uint brg, uint rate); + +extern uint m8xx_cpm_hostalloc(uint size); +extern int m8xx_cpm_hostfree(uint start); +extern void m8xx_cpm_hostdump(void); + +extern void cpm_load_patch(volatile immap_t *immr); + +/* Buffer descriptors used by many of the CPM protocols. +*/ +typedef struct cpm_buf_desc { + ushort cbd_sc; /* Status and Control */ + ushort cbd_datlen; /* Data length in buffer */ + uint cbd_bufaddr; /* Buffer address in host memory */ +} cbd_t; + +#define BD_SC_EMPTY ((ushort)0x8000) /* Receive is empty */ +#define BD_SC_READY ((ushort)0x8000) /* Transmit is ready */ +#define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor */ +#define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */ +#define BD_SC_LAST ((ushort)0x0800) /* Last buffer in frame */ +#define BD_SC_TC ((ushort)0x0400) /* Transmit CRC */ +#define BD_SC_CM ((ushort)0x0200) /* Continous mode */ +#define BD_SC_ID ((ushort)0x0100) /* Rec'd too many idles */ +#define BD_SC_P ((ushort)0x0100) /* xmt preamble */ +#define BD_SC_BR ((ushort)0x0020) /* Break received */ +#define BD_SC_FR ((ushort)0x0010) /* Framing error */ +#define BD_SC_PR ((ushort)0x0008) /* Parity error */ +#define BD_SC_NAK ((ushort)0x0004) /* NAK - did not respond */ +#define BD_SC_OV ((ushort)0x0002) /* Overrun */ +#define BD_SC_UN ((ushort)0x0002) /* Underrun */ +#define BD_SC_CD ((ushort)0x0001) /* ?? */ +#define BD_SC_CL ((ushort)0x0001) /* Collision */ + +/* Parameter RAM offsets. +*/ +#define PROFF_SCC1 ((uint)0x0000) +#define PROFF_IIC ((uint)0x0080) +#define PROFF_SCC2 ((uint)0x0100) +#define PROFF_SPI ((uint)0x0180) +#define PROFF_SCC3 ((uint)0x0200) +#define PROFF_SMC1 ((uint)0x0280) +#define PROFF_SCC4 ((uint)0x0300) +#define PROFF_SMC2 ((uint)0x0380) + +/* Define enough so I can at least use the serial port as a UART. + * The MBX uses SMC1 as the host serial port. + */ +typedef struct smc_uart { + ushort smc_rbase; /* Rx Buffer descriptor base address */ + ushort smc_tbase; /* Tx Buffer descriptor base address */ + u_char smc_rfcr; /* Rx function code */ + u_char smc_tfcr; /* Tx function code */ + ushort smc_mrblr; /* Max receive buffer length */ + uint smc_rstate; /* Internal */ + uint smc_idp; /* Internal */ + ushort smc_rbptr; /* Internal */ + ushort smc_ibc; /* Internal */ + uint smc_rxtmp; /* Internal */ + uint smc_tstate; /* Internal */ + uint smc_tdp; /* Internal */ + ushort smc_tbptr; /* Internal */ + ushort smc_tbc; /* Internal */ + uint smc_txtmp; /* Internal */ + ushort smc_maxidl; /* Maximum idle characters */ + ushort smc_tmpidl; /* Temporary idle counter */ + ushort smc_brklen; /* Last received break length */ + ushort smc_brkec; /* rcv'd break condition counter */ + ushort smc_brkcr; /* xmt break count register */ + ushort smc_rmask; /* Temporary bit mask */ + char res1[8]; /* Reserved */ + ushort smc_rpbase; /* Relocation pointer */ +} smc_uart_t; + +/* Function code bits. +*/ +#define SMC_EB ((u_char)0x10) /* Set big endian byte order */ + +/* SMC uart mode register. +*/ +#define SMCMR_REN ((ushort)0x0001) +#define SMCMR_TEN ((ushort)0x0002) +#define SMCMR_DM ((ushort)0x000c) +#define SMCMR_SM_GCI ((ushort)0x0000) +#define SMCMR_SM_UART ((ushort)0x0020) +#define SMCMR_SM_TRANS ((ushort)0x0030) +#define SMCMR_SM_MASK ((ushort)0x0030) +#define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */ +#define SMCMR_REVD SMCMR_PM_EVEN +#define SMCMR_PEN ((ushort)0x0200) /* Parity enable */ +#define SMCMR_BS SMCMR_PEN +#define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */ +#define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */ +#define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK) + +/* SMC2 as Centronics parallel printer. It is half duplex, in that + * it can only receive or transmit. The parameter ram values for + * each direction are either unique or properly overlap, so we can + * include them in one structure. + */ +typedef struct smc_centronics { + ushort scent_rbase; + ushort scent_tbase; + u_char scent_cfcr; + u_char scent_smask; + ushort scent_mrblr; + uint scent_rstate; + uint scent_r_ptr; + ushort scent_rbptr; + ushort scent_r_cnt; + uint scent_rtemp; + uint scent_tstate; + uint scent_t_ptr; + ushort scent_tbptr; + ushort scent_t_cnt; + uint scent_ttemp; + ushort scent_max_sl; + ushort scent_sl_cnt; + ushort scent_character1; + ushort scent_character2; + ushort scent_character3; + ushort scent_character4; + ushort scent_character5; + ushort scent_character6; + ushort scent_character7; + ushort scent_character8; + ushort scent_rccm; + ushort scent_rccr; +} smc_cent_t; + +/* Centronics Status Mask Register. +*/ +#define SMC_CENT_F ((u_char)0x08) +#define SMC_CENT_PE ((u_char)0x04) +#define SMC_CENT_S ((u_char)0x02) + +/* SMC Event and Mask register. +*/ +#define SMCM_BRKE ((unsigned char)0x40) /* When in UART Mode */ +#define SMCM_BRK ((unsigned char)0x10) /* When in UART Mode */ +#define SMCM_TXE ((unsigned char)0x10) /* When in Transparent Mode */ +#define SMCM_BSY ((unsigned char)0x04) +#define SMCM_TX ((unsigned char)0x02) +#define SMCM_RX ((unsigned char)0x01) + +/* Baud rate generators. +*/ +#define CPM_BRG_RST ((uint)0x00020000) +#define CPM_BRG_EN ((uint)0x00010000) +#define CPM_BRG_EXTC_INT ((uint)0x00000000) +#define CPM_BRG_EXTC_CLK2 ((uint)0x00004000) +#define CPM_BRG_EXTC_CLK6 ((uint)0x00008000) +#define CPM_BRG_ATB ((uint)0x00002000) +#define CPM_BRG_CD_MASK ((uint)0x00001ffe) +#define CPM_BRG_DIV16 ((uint)0x00000001) + +/* SI Clock Route Register +*/ +#define SICR_RCLK_SCC1_BRG1 ((uint)0x00000000) +#define SICR_TCLK_SCC1_BRG1 ((uint)0x00000000) +#define SICR_RCLK_SCC2_BRG2 ((uint)0x00000800) +#define SICR_TCLK_SCC2_BRG2 ((uint)0x00000100) +#define SICR_RCLK_SCC3_BRG3 ((uint)0x00100000) +#define SICR_TCLK_SCC3_BRG3 ((uint)0x00020000) +#define SICR_RCLK_SCC4_BRG4 ((uint)0x18000000) +#define SICR_TCLK_SCC4_BRG4 ((uint)0x03000000) + +/* SCCs. +*/ +#define SCC_GSMRH_IRP ((uint)0x00040000) +#define SCC_GSMRH_GDE ((uint)0x00010000) +#define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000) +#define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000) +#define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000) +#define SCC_GSMRH_REVD ((uint)0x00002000) +#define SCC_GSMRH_TRX ((uint)0x00001000) +#define SCC_GSMRH_TTX ((uint)0x00000800) +#define SCC_GSMRH_CDP ((uint)0x00000400) +#define SCC_GSMRH_CTSP ((uint)0x00000200) +#define SCC_GSMRH_CDS ((uint)0x00000100) +#define SCC_GSMRH_CTSS ((uint)0x00000080) +#define SCC_GSMRH_TFL ((uint)0x00000040) +#define SCC_GSMRH_RFW ((uint)0x00000020) +#define SCC_GSMRH_TXSY ((uint)0x00000010) +#define SCC_GSMRH_SYNL16 ((uint)0x0000000c) +#define SCC_GSMRH_SYNL8 ((uint)0x00000008) +#define SCC_GSMRH_SYNL4 ((uint)0x00000004) +#define SCC_GSMRH_RTSM ((uint)0x00000002) +#define SCC_GSMRH_RSYN ((uint)0x00000001) + +#define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */ +#define SCC_GSMRL_EDGE_NONE ((uint)0x60000000) +#define SCC_GSMRL_EDGE_NEG ((uint)0x40000000) +#define SCC_GSMRL_EDGE_POS ((uint)0x20000000) +#define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000) +#define SCC_GSMRL_TCI ((uint)0x10000000) +#define SCC_GSMRL_TSNC_3 ((uint)0x0c000000) +#define SCC_GSMRL_TSNC_4 ((uint)0x08000000) +#define SCC_GSMRL_TSNC_14 ((uint)0x04000000) +#define SCC_GSMRL_TSNC_INF ((uint)0x00000000) +#define SCC_GSMRL_RINV ((uint)0x02000000) +#define SCC_GSMRL_TINV ((uint)0x01000000) +#define SCC_GSMRL_TPL_128 ((uint)0x00c00000) +#define SCC_GSMRL_TPL_64 ((uint)0x00a00000) +#define SCC_GSMRL_TPL_48 ((uint)0x00800000) +#define SCC_GSMRL_TPL_32 ((uint)0x00600000) +#define SCC_GSMRL_TPL_16 ((uint)0x00400000) +#define SCC_GSMRL_TPL_8 ((uint)0x00200000) +#define SCC_GSMRL_TPL_NONE ((uint)0x00000000) +#define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000) +#define SCC_GSMRL_TPP_01 ((uint)0x00100000) +#define SCC_GSMRL_TPP_10 ((uint)0x00080000) +#define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000) +#define SCC_GSMRL_TEND ((uint)0x00040000) +#define SCC_GSMRL_TDCR_32 ((uint)0x00030000) +#define SCC_GSMRL_TDCR_16 ((uint)0x00020000) +#define SCC_GSMRL_TDCR_8 ((uint)0x00010000) +#define SCC_GSMRL_TDCR_1 ((uint)0x00000000) +#define SCC_GSMRL_RDCR_32 ((uint)0x0000c000) +#define SCC_GSMRL_RDCR_16 ((uint)0x00008000) +#define SCC_GSMRL_RDCR_8 ((uint)0x00004000) +#define SCC_GSMRL_RDCR_1 ((uint)0x00000000) +#define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000) +#define SCC_GSMRL_RENC_MANCH ((uint)0x00002000) +#define SCC_GSMRL_RENC_FM0 ((uint)0x00001000) +#define SCC_GSMRL_RENC_NRZI ((uint)0x00000800) +#define SCC_GSMRL_RENC_NRZ ((uint)0x00000000) +#define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600) +#define SCC_GSMRL_TENC_MANCH ((uint)0x00000400) +#define SCC_GSMRL_TENC_FM0 ((uint)0x00000200) +#define SCC_GSMRL_TENC_NRZI ((uint)0x00000100) +#define SCC_GSMRL_TENC_NRZ ((uint)0x00000000) +#define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */ +#define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080) +#define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040) +#define SCC_GSMRL_DIAG_NORM ((uint)0x00000000) +#define SCC_GSMRL_ENR ((uint)0x00000020) +#define SCC_GSMRL_ENT ((uint)0x00000010) +#define SCC_GSMRL_MODE_ENET ((uint)0x0000000c) +#define SCC_GSMRL_MODE_QMC ((uint)0x0000000a) +#define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009) +#define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008) +#define SCC_GSMRL_MODE_V14 ((uint)0x00000007) +#define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006) +#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005) +#define SCC_GSMRL_MODE_UART ((uint)0x00000004) +#define SCC_GSMRL_MODE_SS7 ((uint)0x00000003) +#define SCC_GSMRL_MODE_ATALK ((uint)0x00000002) +#define SCC_GSMRL_MODE_HDLC ((uint)0x00000000) + +#define SCC_TODR_TOD ((ushort)0x8000) + +/* SCC Event and Mask register. +*/ +#define SCCM_TXE ((unsigned char)0x10) +#define SCCM_BSY ((unsigned char)0x04) +#define SCCM_TX ((unsigned char)0x02) +#define SCCM_RX ((unsigned char)0x01) + +typedef struct scc_param { + ushort scc_rbase; /* Rx Buffer descriptor base address */ + ushort scc_tbase; /* Tx Buffer descriptor base address */ + u_char scc_rfcr; /* Rx function code */ + u_char scc_tfcr; /* Tx function code */ + ushort scc_mrblr; /* Max receive buffer length */ + uint scc_rstate; /* Internal */ + uint scc_idp; /* Internal */ + ushort scc_rbptr; /* Internal */ + ushort scc_ibc; /* Internal */ + uint scc_rxtmp; /* Internal */ + uint scc_tstate; /* Internal */ + uint scc_tdp; /* Internal */ + ushort scc_tbptr; /* Internal */ + ushort scc_tbc; /* Internal */ + uint scc_txtmp; /* Internal */ + uint scc_rcrc; /* Internal */ + uint scc_tcrc; /* Internal */ +} sccp_t; + +/* Function code bits. +*/ +#define SCC_EB ((u_char)0x10) /* Set big endian byte order */ + +/* CPM Ethernet through SCCx. + */ +typedef struct scc_enet { + sccp_t sen_genscc; + uint sen_cpres; /* Preset CRC */ + uint sen_cmask; /* Constant mask for CRC */ + uint sen_crcec; /* CRC Error counter */ + uint sen_alec; /* alignment error counter */ + uint sen_disfc; /* discard frame counter */ + ushort sen_pads; /* Tx short frame pad character */ + ushort sen_retlim; /* Retry limit threshold */ + ushort sen_retcnt; /* Retry limit counter */ + ushort sen_maxflr; /* maximum frame length register */ + ushort sen_minflr; /* minimum frame length register */ + ushort sen_maxd1; /* maximum DMA1 length */ + ushort sen_maxd2; /* maximum DMA2 length */ + ushort sen_maxd; /* Rx max DMA */ + ushort sen_dmacnt; /* Rx DMA counter */ + ushort sen_maxb; /* Max BD byte count */ + ushort sen_gaddr1; /* Group address filter */ + ushort sen_gaddr2; + ushort sen_gaddr3; + ushort sen_gaddr4; + uint sen_tbuf0data0; /* Save area 0 - current frame */ + uint sen_tbuf0data1; /* Save area 1 - current frame */ + uint sen_tbuf0rba; /* Internal */ + uint sen_tbuf0crc; /* Internal */ + ushort sen_tbuf0bcnt; /* Internal */ + ushort sen_paddrh; /* physical address (MSB) */ + ushort sen_paddrm; + ushort sen_paddrl; /* physical address (LSB) */ + ushort sen_pper; /* persistence */ + ushort sen_rfbdptr; /* Rx first BD pointer */ + ushort sen_tfbdptr; /* Tx first BD pointer */ + ushort sen_tlbdptr; /* Tx last BD pointer */ + uint sen_tbuf1data0; /* Save area 0 - current frame */ + uint sen_tbuf1data1; /* Save area 1 - current frame */ + uint sen_tbuf1rba; /* Internal */ + uint sen_tbuf1crc; /* Internal */ + ushort sen_tbuf1bcnt; /* Internal */ + ushort sen_txlen; /* Tx Frame length counter */ + ushort sen_iaddr1; /* Individual address filter */ + ushort sen_iaddr2; + ushort sen_iaddr3; + ushort sen_iaddr4; + ushort sen_boffcnt; /* Backoff counter */ + + /* NOTE: Some versions of the manual have the following items + * incorrectly documented. Below is the proper order. + */ + ushort sen_taddrh; /* temp address (MSB) */ + ushort sen_taddrm; + ushort sen_taddrl; /* temp address (LSB) */ +} scc_enet_t; + +/* SCC Event register as used by Ethernet. +*/ +#define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */ +#define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */ +#define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */ +#define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */ +#define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */ +#define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */ + +/* SCC Mode Register (PMSR) as used by Ethernet. +*/ +#define SCC_PSMR_HBC ((ushort)0x8000) /* Enable heartbeat */ +#define SCC_PSMR_FC ((ushort)0x4000) /* Force collision */ +#define SCC_PSMR_RSH ((ushort)0x2000) /* Receive short frames */ +#define SCC_PSMR_IAM ((ushort)0x1000) /* Check individual hash */ +#define SCC_PSMR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */ +#define SCC_PSMR_PRO ((ushort)0x0200) /* Promiscuous mode */ +#define SCC_PSMR_BRO ((ushort)0x0100) /* Catch broadcast pkts */ +#define SCC_PSMR_SBT ((ushort)0x0080) /* Special backoff timer */ +#define SCC_PSMR_LPB ((ushort)0x0040) /* Set Loopback mode */ +#define SCC_PSMR_SIP ((ushort)0x0020) /* Sample Input Pins */ +#define SCC_PSMR_LCW ((ushort)0x0010) /* Late collision window */ +#define SCC_PSMR_NIB22 ((ushort)0x000a) /* Start frame search */ +#define SCC_PSMR_FDE ((ushort)0x0001) /* Full duplex enable */ + +/* Buffer descriptor control/status used by Ethernet receive. +*/ +#define BD_ENET_RX_EMPTY ((ushort)0x8000) +#define BD_ENET_RX_WRAP ((ushort)0x2000) +#define BD_ENET_RX_INTR ((ushort)0x1000) +#define BD_ENET_RX_LAST ((ushort)0x0800) +#define BD_ENET_RX_FIRST ((ushort)0x0400) +#define BD_ENET_RX_MISS ((ushort)0x0100) +#define BD_ENET_RX_LG ((ushort)0x0020) +#define BD_ENET_RX_NO ((ushort)0x0010) +#define BD_ENET_RX_SH ((ushort)0x0008) +#define BD_ENET_RX_CR ((ushort)0x0004) +#define BD_ENET_RX_OV ((ushort)0x0002) +#define BD_ENET_RX_CL ((ushort)0x0001) +#define BD_ENET_RX_BC ((ushort)0x0080) /* DA is Broadcast */ +#define BD_ENET_RX_MC ((ushort)0x0040) /* DA is Multicast */ +#define BD_ENET_RX_STATS ((ushort)0x013f) /* All status bits */ + +/* Buffer descriptor control/status used by Ethernet transmit. +*/ +#define BD_ENET_TX_READY ((ushort)0x8000) +#define BD_ENET_TX_PAD ((ushort)0x4000) +#define BD_ENET_TX_WRAP ((ushort)0x2000) +#define BD_ENET_TX_INTR ((ushort)0x1000) +#define BD_ENET_TX_LAST ((ushort)0x0800) +#define BD_ENET_TX_TC ((ushort)0x0400) +#define BD_ENET_TX_DEF ((ushort)0x0200) +#define BD_ENET_TX_HB ((ushort)0x0100) +#define BD_ENET_TX_LC ((ushort)0x0080) +#define BD_ENET_TX_RL ((ushort)0x0040) +#define BD_ENET_TX_RCMASK ((ushort)0x003c) +#define BD_ENET_TX_UN ((ushort)0x0002) +#define BD_ENET_TX_CSL ((ushort)0x0001) +#define BD_ENET_TX_STATS ((ushort)0x03ff) /* All status bits */ + +/* SCC as UART +*/ +typedef struct scc_uart { + sccp_t scc_genscc; + char res1[8]; /* Reserved */ + ushort scc_maxidl; /* Maximum idle chars */ + ushort scc_idlc; /* temp idle counter */ + ushort scc_brkcr; /* Break count register */ + ushort scc_parec; /* receive parity error counter */ + ushort scc_frmec; /* receive framing error counter */ + ushort scc_nosec; /* receive noise counter */ + ushort scc_brkec; /* receive break condition counter */ + ushort scc_brkln; /* last received break length */ + ushort scc_uaddr1; /* UART address character 1 */ + ushort scc_uaddr2; /* UART address character 2 */ + ushort scc_rtemp; /* Temp storage */ + ushort scc_toseq; /* Transmit out of sequence char */ + ushort scc_char1; /* control character 1 */ + ushort scc_char2; /* control character 2 */ + ushort scc_char3; /* control character 3 */ + ushort scc_char4; /* control character 4 */ + ushort scc_char5; /* control character 5 */ + ushort scc_char6; /* control character 6 */ + ushort scc_char7; /* control character 7 */ + ushort scc_char8; /* control character 8 */ + ushort scc_rccm; /* receive control character mask */ + ushort scc_rccr; /* receive control character register */ + ushort scc_rlbc; /* receive last break character */ +} scc_uart_t; + +/* SCC Event and Mask registers when it is used as a UART. +*/ +#define UART_SCCM_GLR ((ushort)0x1000) +#define UART_SCCM_GLT ((ushort)0x0800) +#define UART_SCCM_AB ((ushort)0x0200) +#define UART_SCCM_IDL ((ushort)0x0100) +#define UART_SCCM_GRA ((ushort)0x0080) +#define UART_SCCM_BRKE ((ushort)0x0040) +#define UART_SCCM_BRKS ((ushort)0x0020) +#define UART_SCCM_CCR ((ushort)0x0008) +#define UART_SCCM_BSY ((ushort)0x0004) +#define UART_SCCM_TX ((ushort)0x0002) +#define UART_SCCM_RX ((ushort)0x0001) + +/* The SCC PMSR when used as a UART. +*/ +#define SCU_PSMR_FLC ((ushort)0x8000) +#define SCU_PSMR_SL ((ushort)0x4000) +#define SCU_PSMR_CL ((ushort)0x3000) +#define SCU_PSMR_UM ((ushort)0x0c00) +#define SCU_PSMR_FRZ ((ushort)0x0200) +#define SCU_PSMR_RZS ((ushort)0x0100) +#define SCU_PSMR_SYN ((ushort)0x0080) +#define SCU_PSMR_DRT ((ushort)0x0040) +#define SCU_PSMR_PEN ((ushort)0x0010) +#define SCU_PSMR_RPM ((ushort)0x000c) +#define SCU_PSMR_REVP ((ushort)0x0008) +#define SCU_PSMR_TPM ((ushort)0x0003) +#define SCU_PSMR_TEVP ((ushort)0x0002) + +/* CPM Transparent mode SCC. + */ +typedef struct scc_trans { + sccp_t st_genscc; + uint st_cpres; /* Preset CRC */ + uint st_cmask; /* Constant mask for CRC */ +} scc_trans_t; + +#define BD_SCC_TX_LAST ((ushort)0x0800) + +/* IIC parameter RAM. +*/ +typedef struct iic { + ushort iic_rbase; /* Rx Buffer descriptor base address */ + ushort iic_tbase; /* Tx Buffer descriptor base address */ + u_char iic_rfcr; /* Rx function code */ + u_char iic_tfcr; /* Tx function code */ + ushort iic_mrblr; /* Max receive buffer length */ + uint iic_rstate; /* Internal */ + uint iic_rdp; /* Internal */ + ushort iic_rbptr; /* Internal */ + ushort iic_rbc; /* Internal */ + uint iic_rxtmp; /* Internal */ + uint iic_tstate; /* Internal */ + uint iic_tdp; /* Internal */ + ushort iic_tbptr; /* Internal */ + ushort iic_tbc; /* Internal */ + uint iic_txtmp; /* Internal */ + char res1[4]; /* Reserved */ + ushort iic_rpbase; /* Relocation pointer */ + char res2[2]; /* Reserved */ +} iic_t; + +#define BD_IIC_START ((ushort)0x0400) + +/* SPI parameter RAM. +*/ +typedef struct spi { + ushort spi_rbase; /* Rx Buffer descriptor base address */ + ushort spi_tbase; /* Tx Buffer descriptor base address */ + u_char spi_rfcr; /* Rx function code */ + u_char spi_tfcr; /* Tx function code */ + ushort spi_mrblr; /* Max receive buffer length */ + uint spi_rstate; /* Internal */ + uint spi_rdp; /* Internal */ + ushort spi_rbptr; /* Internal */ + ushort spi_rbc; /* Internal */ + uint spi_rxtmp; /* Internal */ + uint spi_tstate; /* Internal */ + uint spi_tdp; /* Internal */ + ushort spi_tbptr; /* Internal */ + ushort spi_tbc; /* Internal */ + uint spi_txtmp; /* Internal */ + uint spi_res; + ushort spi_rpbase; /* Relocation pointer */ + ushort spi_res2; +} spi_t; + +/* SPI Mode register. +*/ +#define SPMODE_LOOP ((ushort)0x4000) /* Loopback */ +#define SPMODE_CI ((ushort)0x2000) /* Clock Invert */ +#define SPMODE_CP ((ushort)0x1000) /* Clock Phase */ +#define SPMODE_DIV16 ((ushort)0x0800) /* BRG/16 mode */ +#define SPMODE_REV ((ushort)0x0400) /* Reversed Data */ +#define SPMODE_MSTR ((ushort)0x0200) /* SPI Master */ +#define SPMODE_EN ((ushort)0x0100) /* Enable */ +#define SPMODE_LENMSK ((ushort)0x00f0) /* character length */ +#define SPMODE_LEN4 ((ushort)0x0030) /* 4 bits per char */ +#define SPMODE_LEN8 ((ushort)0x0070) /* 8 bits per char */ +#define SPMODE_LEN16 ((ushort)0x00f0) /* 16 bits per char */ +#define SPMODE_PMMSK ((ushort)0x000f) /* prescale modulus */ + +/* SPIE fields */ +#define SPIE_MME 0x20 +#define SPIE_TXE 0x10 +#define SPIE_BSY 0x04 +#define SPIE_TXB 0x02 +#define SPIE_RXB 0x01 + +/* + * RISC Controller Configuration Register definitons + */ +#define RCCR_TIME 0x8000 /* RISC Timer Enable */ +#define RCCR_TIMEP(t) (((t) & 0x3F)<<8) /* RISC Timer Period */ +#define RCCR_TIME_MASK 0x00FF /* not RISC Timer related bits */ + +/* RISC Timer Parameter RAM offset */ +#define PROFF_RTMR ((uint)0x01B0) + +typedef struct risc_timer_pram { + unsigned short tm_base; /* RISC Timer Table Base Address */ + unsigned short tm_ptr; /* RISC Timer Table Pointer (internal) */ + unsigned short r_tmr; /* RISC Timer Mode Register */ + unsigned short r_tmv; /* RISC Timer Valid Register */ + unsigned long tm_cmd; /* RISC Timer Command Register */ + unsigned long tm_cnt; /* RISC Timer Internal Count */ +} rt_pram_t; + +/* Bits in RISC Timer Command Register */ +#define TM_CMD_VALID 0x80000000 /* Valid - Enables the timer */ +#define TM_CMD_RESTART 0x40000000 /* Restart - for automatic restart */ +#define TM_CMD_PWM 0x20000000 /* Run in Pulse Width Modulation Mode */ +#define TM_CMD_NUM(n) (((n)&0xF)<<16) /* Timer Number */ +#define TM_CMD_PERIOD(p) ((p)&0xFFFF) /* Timer Period */ + +/* CPM interrupts. There are nearly 32 interrupts generated by CPM + * channels or devices. All of these are presented to the PPC core + * as a single interrupt. The CPM interrupt handler dispatches its + * own handlers, in a similar fashion to the PPC core handler. We + * use the table as defined in the manuals (i.e. no special high + * priority and SCC1 == SCCa, etc...). + */ +#define CPMVEC_NR 32 +#define CPMVEC_PIO_PC15 ((ushort)0x1f) +#define CPMVEC_SCC1 ((ushort)0x1e) +#define CPMVEC_SCC2 ((ushort)0x1d) +#define CPMVEC_SCC3 ((ushort)0x1c) +#define CPMVEC_SCC4 ((ushort)0x1b) +#define CPMVEC_PIO_PC14 ((ushort)0x1a) +#define CPMVEC_TIMER1 ((ushort)0x19) +#define CPMVEC_PIO_PC13 ((ushort)0x18) +#define CPMVEC_PIO_PC12 ((ushort)0x17) +#define CPMVEC_SDMA_CB_ERR ((ushort)0x16) +#define CPMVEC_IDMA1 ((ushort)0x15) +#define CPMVEC_IDMA2 ((ushort)0x14) +#define CPMVEC_TIMER2 ((ushort)0x12) +#define CPMVEC_RISCTIMER ((ushort)0x11) +#define CPMVEC_I2C ((ushort)0x10) +#define CPMVEC_PIO_PC11 ((ushort)0x0f) +#define CPMVEC_PIO_PC10 ((ushort)0x0e) +#define CPMVEC_TIMER3 ((ushort)0x0c) +#define CPMVEC_PIO_PC9 ((ushort)0x0b) +#define CPMVEC_PIO_PC8 ((ushort)0x0a) +#define CPMVEC_PIO_PC7 ((ushort)0x09) +#define CPMVEC_TIMER4 ((ushort)0x07) +#define CPMVEC_PIO_PC6 ((ushort)0x06) +#define CPMVEC_SPI ((ushort)0x05) +#define CPMVEC_SMC1 ((ushort)0x04) +#define CPMVEC_SMC2 ((ushort)0x03) +#define CPMVEC_PIO_PC5 ((ushort)0x02) +#define CPMVEC_PIO_PC4 ((ushort)0x01) +#define CPMVEC_ERROR ((ushort)0x00) + +/* CPM interrupt configuration vector. +*/ +#define CICR_SCD_SCC4 ((uint)0x00c00000) /* SCC4 @ SCCd */ +#define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */ +#define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */ +#define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */ +#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrrupt */ +#define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */ +#define CICR_IEN ((uint)0x00000080) /* Int. enable */ +#define CICR_SPS ((uint)0x00000001) /* SCC Spread */ + +extern void cpm_install_handler(int vec, void (*handler)(void *), void *dev_id); +extern void cpm_free_handler(int vec); + +#define IMAP_ADDR (get_immrbase()) + +#define CPM_PIN_INPUT 0 +#define CPM_PIN_OUTPUT 1 +#define CPM_PIN_PRIMARY 0 +#define CPM_PIN_SECONDARY 2 +#define CPM_PIN_GPIO 4 +#define CPM_PIN_OPENDRAIN 8 + +enum cpm_port { + CPM_PORTA, + CPM_PORTB, + CPM_PORTC, + CPM_PORTD, + CPM_PORTE, +}; + +void cpm1_set_pin(enum cpm_port port, int pin, int flags); + +enum cpm_clk_dir { + CPM_CLK_RX, + CPM_CLK_TX, + CPM_CLK_RTX +}; + +enum cpm_clk_target { + CPM_CLK_SCC1, + CPM_CLK_SCC2, + CPM_CLK_SCC3, + CPM_CLK_SCC4, + CPM_CLK_SMC1, + CPM_CLK_SMC2, +}; + +enum cpm_clk { + CPM_BRG1, /* Baud Rate Generator 1 */ + CPM_BRG2, /* Baud Rate Generator 2 */ + CPM_BRG3, /* Baud Rate Generator 3 */ + CPM_BRG4, /* Baud Rate Generator 4 */ + CPM_CLK1, /* Clock 1 */ + CPM_CLK2, /* Clock 2 */ + CPM_CLK3, /* Clock 3 */ + CPM_CLK4, /* Clock 4 */ + CPM_CLK5, /* Clock 5 */ + CPM_CLK6, /* Clock 6 */ + CPM_CLK7, /* Clock 7 */ + CPM_CLK8, /* Clock 8 */ +}; + +int cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode); + +#endif /* __CPM_8XX__ */ diff --git a/include/asm-powerpc/cpm.h b/include/asm-powerpc/cpm.h new file mode 100644 index 00000000000..48df9f330e7 --- /dev/null +++ b/include/asm-powerpc/cpm.h @@ -0,0 +1,14 @@ +#ifndef __CPM_H +#define __CPM_H + +#include <linux/compiler.h> +#include <linux/types.h> + +int cpm_muram_init(void); +unsigned long cpm_muram_alloc(unsigned long size, unsigned long align); +int cpm_muram_free(unsigned long offset); +unsigned long cpm_muram_alloc_fixed(unsigned long offset, unsigned long size); +void __iomem *cpm_muram_addr(unsigned long offset); +dma_addr_t cpm_muram_dma(void __iomem *addr); + +#endif diff --git a/include/asm-powerpc/cpm2.h b/include/asm-powerpc/cpm2.h new file mode 100644 index 00000000000..f1112c15ef9 --- /dev/null +++ b/include/asm-powerpc/cpm2.h @@ -0,0 +1,1274 @@ +/* + * Communication Processor Module v2. + * + * This file contains structures and information for the communication + * processor channels found in the dual port RAM or parameter RAM. + * All CPM control and status is available through the CPM2 internal + * memory map. See immap_cpm2.h for details. + */ +#ifdef __KERNEL__ +#ifndef __CPM2__ +#define __CPM2__ + +#include <asm/immap_cpm2.h> +#include <asm/cpm.h> + +#ifdef CONFIG_PPC_85xx +#define CPM_MAP_ADDR (get_immrbase() + 0x80000) +#endif + +/* CPM Command register. +*/ +#define CPM_CR_RST ((uint)0x80000000) +#define CPM_CR_PAGE ((uint)0x7c000000) +#define CPM_CR_SBLOCK ((uint)0x03e00000) +#define CPM_CR_FLG ((uint)0x00010000) +#define CPM_CR_MCN ((uint)0x00003fc0) +#define CPM_CR_OPCODE ((uint)0x0000000f) + +/* Device sub-block and page codes. +*/ +#define CPM_CR_SCC1_SBLOCK (0x04) +#define CPM_CR_SCC2_SBLOCK (0x05) +#define CPM_CR_SCC3_SBLOCK (0x06) +#define CPM_CR_SCC4_SBLOCK (0x07) +#define CPM_CR_SMC1_SBLOCK (0x08) +#define CPM_CR_SMC2_SBLOCK (0x09) +#define CPM_CR_SPI_SBLOCK (0x0a) +#define CPM_CR_I2C_SBLOCK (0x0b) +#define CPM_CR_TIMER_SBLOCK (0x0f) +#define CPM_CR_RAND_SBLOCK (0x0e) +#define CPM_CR_FCC1_SBLOCK (0x10) +#define CPM_CR_FCC2_SBLOCK (0x11) +#define CPM_CR_FCC3_SBLOCK (0x12) +#define CPM_CR_IDMA1_SBLOCK (0x14) +#define CPM_CR_IDMA2_SBLOCK (0x15) +#define CPM_CR_IDMA3_SBLOCK (0x16) +#define CPM_CR_IDMA4_SBLOCK (0x17) +#define CPM_CR_MCC1_SBLOCK (0x1c) + +#define CPM_CR_FCC_SBLOCK(x) (x + 0x10) + +#define CPM_CR_SCC1_PAGE (0x00) +#define CPM_CR_SCC2_PAGE (0x01) +#define CPM_CR_SCC3_PAGE (0x02) +#define CPM_CR_SCC4_PAGE (0x03) +#define CPM_CR_SMC1_PAGE (0x07) +#define CPM_CR_SMC2_PAGE (0x08) +#define CPM_CR_SPI_PAGE (0x09) +#define CPM_CR_I2C_PAGE (0x0a) +#define CPM_CR_TIMER_PAGE (0x0a) +#define CPM_CR_RAND_PAGE (0x0a) +#define CPM_CR_FCC1_PAGE (0x04) +#define CPM_CR_FCC2_PAGE (0x05) +#define CPM_CR_FCC3_PAGE (0x06) +#define CPM_CR_IDMA1_PAGE (0x07) +#define CPM_CR_IDMA2_PAGE (0x08) +#define CPM_CR_IDMA3_PAGE (0x09) +#define CPM_CR_IDMA4_PAGE (0x0a) +#define CPM_CR_MCC1_PAGE (0x07) +#define CPM_CR_MCC2_PAGE (0x08) + +#define CPM_CR_FCC_PAGE(x) (x + 0x04) + +/* Some opcodes (there are more...later) +*/ +#define CPM_CR_INIT_TRX ((ushort)0x0000) +#define CPM_CR_INIT_RX ((ushort)0x0001) +#define CPM_CR_INIT_TX ((ushort)0x0002) +#define CPM_CR_HUNT_MODE ((ushort)0x0003) +#define CPM_CR_STOP_TX ((ushort)0x0004) +#define CPM_CR_GRA_STOP_TX ((ushort)0x0005) +#define CPM_CR_RESTART_TX ((ushort)0x0006) +#define CPM_CR_SET_GADDR ((ushort)0x0008) +#define CPM_CR_START_IDMA ((ushort)0x0009) +#define CPM_CR_STOP_IDMA ((ushort)0x000b) + +#define mk_cr_cmd(PG, SBC, MCN, OP) \ + ((PG << 26) | (SBC << 21) | (MCN << 6) | OP) + +#ifndef CONFIG_PPC_CPM_NEW_BINDING +/* Dual Port RAM addresses. The first 16K is available for almost + * any CPM use, so we put the BDs there. The first 128 bytes are + * used for SMC1 and SMC2 parameter RAM, so we start allocating + * BDs above that. All of this must change when we start + * downloading RAM microcode. + */ +#define CPM_DATAONLY_BASE ((uint)128) +#define CPM_DP_NOSPACE ((uint)0x7fffffff) +#if defined(CONFIG_8272) || defined(CONFIG_MPC8555) +#define CPM_DATAONLY_SIZE ((uint)(8 * 1024) - CPM_DATAONLY_BASE) +#define CPM_FCC_SPECIAL_BASE ((uint)0x00009000) +#else +#define CPM_DATAONLY_SIZE ((uint)(16 * 1024) - CPM_DATAONLY_BASE) +#define CPM_FCC_SPECIAL_BASE ((uint)0x0000b000) +#endif +#endif + +/* The number of pages of host memory we allocate for CPM. This is + * done early in kernel initialization to get physically contiguous + * pages. + */ +#define NUM_CPM_HOST_PAGES 2 + +/* Export the base address of the communication processor registers + * and dual port ram. + */ +extern cpm_cpm2_t __iomem *cpmp; /* Pointer to comm processor */ + +#ifdef CONFIG_PPC_CPM_NEW_BINDING +#define cpm_dpalloc cpm_muram_alloc +#define cpm_dpfree cpm_muram_free +#define cpm_dpram_addr cpm_muram_addr +#else +extern unsigned long cpm_dpalloc(uint size, uint align); +extern int cpm_dpfree(unsigned long offset); +extern unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align); +extern void cpm_dpdump(void); +extern void *cpm_dpram_addr(unsigned long offset); +#endif + +extern void cpm_setbrg(uint brg, uint rate); +extern void cpm2_fastbrg(uint brg, uint rate, int div16); +extern void cpm2_reset(void); + + +/* Buffer descriptors used by many of the CPM protocols. +*/ +typedef struct cpm_buf_desc { + ushort cbd_sc; /* Status and Control */ + ushort cbd_datlen; /* Data length in buffer */ + uint cbd_bufaddr; /* Buffer address in host memory */ +} cbd_t; + +#define BD_SC_EMPTY ((ushort)0x8000) /* Receive is empty */ +#define BD_SC_READY ((ushort)0x8000) /* Transmit is ready */ +#define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor */ +#define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */ +#define BD_SC_LAST ((ushort)0x0800) /* Last buffer in frame */ +#define BD_SC_CM ((ushort)0x0200) /* Continous mode */ +#define BD_SC_ID ((ushort)0x0100) /* Rec'd too many idles */ +#define BD_SC_P ((ushort)0x0100) /* xmt preamble */ +#define BD_SC_BR ((ushort)0x0020) /* Break received */ +#define BD_SC_FR ((ushort)0x0010) /* Framing error */ +#define BD_SC_PR ((ushort)0x0008) /* Parity error */ +#define BD_SC_OV ((ushort)0x0002) /* Overrun */ +#define BD_SC_CD ((ushort)0x0001) /* ?? */ + +/* Function code bits, usually generic to devices. +*/ +#define CPMFCR_GBL ((u_char)0x20) /* Set memory snooping */ +#define CPMFCR_EB ((u_char)0x10) /* Set big endian byte order */ +#define CPMFCR_TC2 ((u_char)0x04) /* Transfer code 2 value */ +#define CPMFCR_DTB ((u_char)0x02) /* Use local bus for data when set */ +#define CPMFCR_BDB ((u_char)0x01) /* Use local bus for BD when set */ + +/* Parameter RAM offsets from the base. +*/ +#define PROFF_SCC1 ((uint)0x8000) +#define PROFF_SCC2 ((uint)0x8100) +#define PROFF_SCC3 ((uint)0x8200) +#define PROFF_SCC4 ((uint)0x8300) +#define PROFF_FCC1 ((uint)0x8400) +#define PROFF_FCC2 ((uint)0x8500) +#define PROFF_FCC3 ((uint)0x8600) +#define PROFF_MCC1 ((uint)0x8700) +#define PROFF_SMC1_BASE ((uint)0x87fc) +#define PROFF_IDMA1_BASE ((uint)0x87fe) +#define PROFF_MCC2 ((uint)0x8800) +#define PROFF_SMC2_BASE ((uint)0x88fc) +#define PROFF_IDMA2_BASE ((uint)0x88fe) +#define PROFF_SPI_BASE ((uint)0x89fc) +#define PROFF_IDMA3_BASE ((uint)0x89fe) +#define PROFF_TIMERS ((uint)0x8ae0) +#define PROFF_REVNUM ((uint)0x8af0) +#define PROFF_RAND ((uint)0x8af8) +#define PROFF_I2C_BASE ((uint)0x8afc) +#define PROFF_IDMA4_BASE ((uint)0x8afe) + +#define PROFF_SCC_SIZE ((uint)0x100) +#define PROFF_FCC_SIZE ((uint)0x100) +#define PROFF_SMC_SIZE ((uint)64) + +/* The SMCs are relocated to any of the first eight DPRAM pages. + * We will fix these at the first locations of DPRAM, until we + * get some microcode patches :-). + * The parameter ram space for the SMCs is fifty-some bytes, and + * they are required to start on a 64 byte boundary. + */ +#define PROFF_SMC1 (0) +#define PROFF_SMC2 (64) + + +/* Define enough so I can at least use the serial port as a UART. + */ +typedef struct smc_uart { + ushort smc_rbase; /* Rx Buffer descriptor base address */ + ushort smc_tbase; /* Tx Buffer descriptor base address */ + u_char smc_rfcr; /* Rx function code */ + u_char smc_tfcr; /* Tx function code */ + ushort smc_mrblr; /* Max receive buffer length */ + uint smc_rstate; /* Internal */ + uint smc_idp; /* Internal */ + ushort smc_rbptr; /* Internal */ + ushort smc_ibc; /* Internal */ + uint smc_rxtmp; /* Internal */ + uint smc_tstate; /* Internal */ + uint smc_tdp; /* Internal */ + ushort smc_tbptr; /* Internal */ + ushort smc_tbc; /* Internal */ + uint smc_txtmp; /* Internal */ + ushort smc_maxidl; /* Maximum idle characters */ + ushort smc_tmpidl; /* Temporary idle counter */ + ushort smc_brklen; /* Last received break length */ + ushort smc_brkec; /* rcv'd break condition counter */ + ushort smc_brkcr; /* xmt break count register */ + ushort smc_rmask; /* Temporary bit mask */ + uint smc_stmp; /* SDMA Temp */ +} smc_uart_t; + +/* SMC uart mode register (Internal memory map). +*/ +#define SMCMR_REN ((ushort)0x0001) +#define SMCMR_TEN ((ushort)0x0002) +#define SMCMR_DM ((ushort)0x000c) +#define SMCMR_SM_GCI ((ushort)0x0000) +#define SMCMR_SM_UART ((ushort)0x0020) +#define SMCMR_SM_TRANS ((ushort)0x0030) +#define SMCMR_SM_MASK ((ushort)0x0030) +#define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */ +#define SMCMR_REVD SMCMR_PM_EVEN +#define SMCMR_PEN ((ushort)0x0200) /* Parity enable */ +#define SMCMR_BS SMCMR_PEN +#define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */ +#define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */ +#define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK) + +/* SMC Event and Mask register. +*/ +#define SMCM_BRKE ((unsigned char)0x40) /* When in UART Mode */ +#define SMCM_BRK ((unsigned char)0x10) /* When in UART Mode */ +#define SMCM_TXE ((unsigned char)0x10) +#define SMCM_BSY ((unsigned char)0x04) +#define SMCM_TX ((unsigned char)0x02) +#define SMCM_RX ((unsigned char)0x01) + +/* Baud rate generators. +*/ +#define CPM_BRG_RST ((uint)0x00020000) +#define CPM_BRG_EN ((uint)0x00010000) +#define CPM_BRG_EXTC_INT ((uint)0x00000000) +#define CPM_BRG_EXTC_CLK3_9 ((uint)0x00004000) +#define CPM_BRG_EXTC_CLK5_15 ((uint)0x00008000) +#define CPM_BRG_ATB ((uint)0x00002000) +#define CPM_BRG_CD_MASK ((uint)0x00001ffe) +#define CPM_BRG_DIV16 ((uint)0x00000001) + +/* SCCs. +*/ +#define SCC_GSMRH_IRP ((uint)0x00040000) +#define SCC_GSMRH_GDE ((uint)0x00010000) +#define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000) +#define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000) +#define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000) +#define SCC_GSMRH_REVD ((uint)0x00002000) +#define SCC_GSMRH_TRX ((uint)0x00001000) +#define SCC_GSMRH_TTX ((uint)0x00000800) +#define SCC_GSMRH_CDP ((uint)0x00000400) +#define SCC_GSMRH_CTSP ((uint)0x00000200) +#define SCC_GSMRH_CDS ((uint)0x00000100) +#define SCC_GSMRH_CTSS ((uint)0x00000080) +#define SCC_GSMRH_TFL ((uint)0x00000040) +#define SCC_GSMRH_RFW ((uint)0x00000020) +#define SCC_GSMRH_TXSY ((uint)0x00000010) +#define SCC_GSMRH_SYNL16 ((uint)0x0000000c) +#define SCC_GSMRH_SYNL8 ((uint)0x00000008) +#define SCC_GSMRH_SYNL4 ((uint)0x00000004) +#define SCC_GSMRH_RTSM ((uint)0x00000002) +#define SCC_GSMRH_RSYN ((uint)0x00000001) + +#define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */ +#define SCC_GSMRL_EDGE_NONE ((uint)0x60000000) +#define SCC_GSMRL_EDGE_NEG ((uint)0x40000000) +#define SCC_GSMRL_EDGE_POS ((uint)0x20000000) +#define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000) +#define SCC_GSMRL_TCI ((uint)0x10000000) +#define SCC_GSMRL_TSNC_3 ((uint)0x0c000000) +#define SCC_GSMRL_TSNC_4 ((uint)0x08000000) +#define SCC_GSMRL_TSNC_14 ((uint)0x04000000) +#define SCC_GSMRL_TSNC_INF ((uint)0x00000000) +#define SCC_GSMRL_RINV ((uint)0x02000000) +#define SCC_GSMRL_TINV ((uint)0x01000000) +#define SCC_GSMRL_TPL_128 ((uint)0x00c00000) +#define SCC_GSMRL_TPL_64 ((uint)0x00a00000) +#define SCC_GSMRL_TPL_48 ((uint)0x00800000) +#define SCC_GSMRL_TPL_32 ((uint)0x00600000) +#define SCC_GSMRL_TPL_16 ((uint)0x00400000) +#define SCC_GSMRL_TPL_8 ((uint)0x00200000) +#define SCC_GSMRL_TPL_NONE ((uint)0x00000000) +#define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000) +#define SCC_GSMRL_TPP_01 ((uint)0x00100000) +#define SCC_GSMRL_TPP_10 ((uint)0x00080000) +#define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000) +#define SCC_GSMRL_TEND ((uint)0x00040000) +#define SCC_GSMRL_TDCR_32 ((uint)0x00030000) +#define SCC_GSMRL_TDCR_16 ((uint)0x00020000) +#define SCC_GSMRL_TDCR_8 ((uint)0x00010000) +#define SCC_GSMRL_TDCR_1 ((uint)0x00000000) +#define SCC_GSMRL_RDCR_32 ((uint)0x0000c000) +#define SCC_GSMRL_RDCR_16 ((uint)0x00008000) +#define SCC_GSMRL_RDCR_8 ((uint)0x00004000) +#define SCC_GSMRL_RDCR_1 ((uint)0x00000000) +#define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000) +#define SCC_GSMRL_RENC_MANCH ((uint)0x00002000) +#define SCC_GSMRL_RENC_FM0 ((uint)0x00001000) +#define SCC_GSMRL_RENC_NRZI ((uint)0x00000800) +#define SCC_GSMRL_RENC_NRZ ((uint)0x00000000) +#define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600) +#define SCC_GSMRL_TENC_MANCH ((uint)0x00000400) +#define SCC_GSMRL_TENC_FM0 ((uint)0x00000200) +#define SCC_GSMRL_TENC_NRZI ((uint)0x00000100) +#define SCC_GSMRL_TENC_NRZ ((uint)0x00000000) +#define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */ +#define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080) +#define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040) +#define SCC_GSMRL_DIAG_NORM ((uint)0x00000000) +#define SCC_GSMRL_ENR ((uint)0x00000020) +#define SCC_GSMRL_ENT ((uint)0x00000010) +#define SCC_GSMRL_MODE_ENET ((uint)0x0000000c) +#define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009) +#define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008) +#define SCC_GSMRL_MODE_V14 ((uint)0x00000007) +#define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006) +#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005) +#define SCC_GSMRL_MODE_UART ((uint)0x00000004) +#define SCC_GSMRL_MODE_SS7 ((uint)0x00000003) +#define SCC_GSMRL_MODE_ATALK ((uint)0x00000002) +#define SCC_GSMRL_MODE_HDLC ((uint)0x00000000) + +#define SCC_TODR_TOD ((ushort)0x8000) + +/* SCC Event and Mask register. +*/ +#define SCCM_TXE ((unsigned char)0x10) +#define SCCM_BSY ((unsigned char)0x04) +#define SCCM_TX ((unsigned char)0x02) +#define SCCM_RX ((unsigned char)0x01) + +typedef struct scc_param { + ushort scc_rbase; /* Rx Buffer descriptor base address */ + ushort scc_tbase; /* Tx Buffer descriptor base address */ + u_char scc_rfcr; /* Rx function code */ + u_char scc_tfcr; /* Tx function code */ + ushort scc_mrblr; /* Max receive buffer length */ + uint scc_rstate; /* Internal */ + uint scc_idp; /* Internal */ + ushort scc_rbptr; /* Internal */ + ushort scc_ibc; /* Internal */ + uint scc_rxtmp; /* Internal */ + uint scc_tstate; /* Internal */ + uint scc_tdp; /* Internal */ + ushort scc_tbptr; /* Internal */ + ushort scc_tbc; /* Internal */ + uint scc_txtmp; /* Internal */ + uint scc_rcrc; /* Internal */ + uint scc_tcrc; /* Internal */ +} sccp_t; + +/* CPM Ethernet through SCC1. + */ +typedef struct scc_enet { + sccp_t sen_genscc; + uint sen_cpres; /* Preset CRC */ + uint sen_cmask; /* Constant mask for CRC */ + uint sen_crcec; /* CRC Error counter */ + uint sen_alec; /* alignment error counter */ + uint sen_disfc; /* discard frame counter */ + ushort sen_pads; /* Tx short frame pad character */ + ushort sen_retlim; /* Retry limit threshold */ + ushort sen_retcnt; /* Retry limit counter */ + ushort sen_maxflr; /* maximum frame length register */ + ushort sen_minflr; /* minimum frame length register */ + ushort sen_maxd1; /* maximum DMA1 length */ + ushort sen_maxd2; /* maximum DMA2 length */ + ushort sen_maxd; /* Rx max DMA */ + ushort sen_dmacnt; /* Rx DMA counter */ + ushort sen_maxb; /* Max BD byte count */ + ushort sen_gaddr1; /* Group address filter */ + ushort sen_gaddr2; + ushort sen_gaddr3; + ushort sen_gaddr4; + uint sen_tbuf0data0; /* Save area 0 - current frame */ + uint sen_tbuf0data1; /* Save area 1 - current frame */ + uint sen_tbuf0rba; /* Internal */ + uint sen_tbuf0crc; /* Internal */ + ushort sen_tbuf0bcnt; /* Internal */ + ushort sen_paddrh; /* physical address (MSB) */ + ushort sen_paddrm; + ushort sen_paddrl; /* physical address (LSB) */ + ushort sen_pper; /* persistence */ + ushort sen_rfbdptr; /* Rx first BD pointer */ + ushort sen_tfbdptr; /* Tx first BD pointer */ + ushort sen_tlbdptr; /* Tx last BD pointer */ + uint sen_tbuf1data0; /* Save area 0 - current frame */ + uint sen_tbuf1data1; /* Save area 1 - current frame */ + uint sen_tbuf1rba; /* Internal */ + uint sen_tbuf1crc; /* Internal */ + ushort sen_tbuf1bcnt; /* Internal */ + ushort sen_txlen; /* Tx Frame length counter */ + ushort sen_iaddr1; /* Individual address filter */ + ushort sen_iaddr2; + ushort sen_iaddr3; + ushort sen_iaddr4; + ushort sen_boffcnt; /* Backoff counter */ + + /* NOTE: Some versions of the manual have the following items + * incorrectly documented. Below is the proper order. + */ + ushort sen_taddrh; /* temp address (MSB) */ + ushort sen_taddrm; + ushort sen_taddrl; /* temp address (LSB) */ +} scc_enet_t; + + +/* SCC Event register as used by Ethernet. +*/ +#define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */ +#define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */ +#define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */ +#define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */ +#define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */ +#define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */ + +/* SCC Mode Register (PSMR) as used by Ethernet. +*/ +#define SCC_PSMR_HBC ((ushort)0x8000) /* Enable heartbeat */ +#define SCC_PSMR_FC ((ushort)0x4000) /* Force collision */ +#define SCC_PSMR_RSH ((ushort)0x2000) /* Receive short frames */ +#define SCC_PSMR_IAM ((ushort)0x1000) /* Check individual hash */ +#define SCC_PSMR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */ +#define SCC_PSMR_PRO ((ushort)0x0200) /* Promiscuous mode */ +#define SCC_PSMR_BRO ((ushort)0x0100) /* Catch broadcast pkts */ +#define SCC_PSMR_SBT ((ushort)0x0080) /* Special backoff timer */ +#define SCC_PSMR_LPB ((ushort)0x0040) /* Set Loopback mode */ +#define SCC_PSMR_SIP ((ushort)0x0020) /* Sample Input Pins */ +#define SCC_PSMR_LCW ((ushort)0x0010) /* Late collision window */ +#define SCC_PSMR_NIB22 ((ushort)0x000a) /* Start frame search */ +#define SCC_PSMR_FDE ((ushort)0x0001) /* Full duplex enable */ + +/* Buffer descriptor control/status used by Ethernet receive. + * Common to SCC and FCC. + */ +#define BD_ENET_RX_EMPTY ((ushort)0x8000) +#define BD_ENET_RX_WRAP ((ushort)0x2000) +#define BD_ENET_RX_INTR ((ushort)0x1000) +#define BD_ENET_RX_LAST ((ushort)0x0800) +#define BD_ENET_RX_FIRST ((ushort)0x0400) +#define BD_ENET_RX_MISS ((ushort)0x0100) +#define BD_ENET_RX_BC ((ushort)0x0080) /* FCC Only */ +#define BD_ENET_RX_MC ((ushort)0x0040) /* FCC Only */ +#define BD_ENET_RX_LG ((ushort)0x0020) +#define BD_ENET_RX_NO ((ushort)0x0010) +#define BD_ENET_RX_SH ((ushort)0x0008) +#define BD_ENET_RX_CR ((ushort)0x0004) +#define BD_ENET_RX_OV ((ushort)0x0002) +#define BD_ENET_RX_CL ((ushort)0x0001) +#define BD_ENET_RX_STATS ((ushort)0x01ff) /* All status bits */ + +/* Buffer descriptor control/status used by Ethernet transmit. + * Common to SCC and FCC. + */ +#define BD_ENET_TX_READY ((ushort)0x8000) +#define BD_ENET_TX_PAD ((ushort)0x4000) +#define BD_ENET_TX_WRAP ((ushort)0x2000) +#define BD_ENET_TX_INTR ((ushort)0x1000) +#define BD_ENET_TX_LAST ((ushort)0x0800) +#define BD_ENET_TX_TC ((ushort)0x0400) +#define BD_ENET_TX_DEF ((ushort)0x0200) +#define BD_ENET_TX_HB ((ushort)0x0100) +#define BD_ENET_TX_LC ((ushort)0x0080) +#define BD_ENET_TX_RL ((ushort)0x0040) +#define BD_ENET_TX_RCMASK ((ushort)0x003c) +#define BD_ENET_TX_UN ((ushort)0x0002) +#define BD_ENET_TX_CSL ((ushort)0x0001) +#define BD_ENET_TX_STATS ((ushort)0x03ff) /* All status bits */ + +/* SCC as UART +*/ +typedef struct scc_uart { + sccp_t scc_genscc; + uint scc_res1; /* Reserved */ + uint scc_res2; /* Reserved */ + ushort scc_maxidl; /* Maximum idle chars */ + ushort scc_idlc; /* temp idle counter */ + ushort scc_brkcr; /* Break count register */ + ushort scc_parec; /* receive parity error counter */ + ushort scc_frmec; /* receive framing error counter */ + ushort scc_nosec; /* receive noise counter */ + ushort scc_brkec; /* receive break condition counter */ + ushort scc_brkln; /* last received break length */ + ushort scc_uaddr1; /* UART address character 1 */ + ushort scc_uaddr2; /* UART address character 2 */ + ushort scc_rtemp; /* Temp storage */ + ushort scc_toseq; /* Transmit out of sequence char */ + ushort scc_char1; /* control character 1 */ + ushort scc_char2; /* control character 2 */ + ushort scc_char3; /* control character 3 */ + ushort scc_char4; /* control character 4 */ + ushort scc_char5; /* control character 5 */ + ushort scc_char6; /* control character 6 */ + ushort scc_char7; /* control character 7 */ + ushort scc_char8; /* control character 8 */ + ushort scc_rccm; /* receive control character mask */ + ushort scc_rccr; /* receive control character register */ + ushort scc_rlbc; /* receive last break character */ +} scc_uart_t; + +/* SCC Event and Mask registers when it is used as a UART. +*/ +#define UART_SCCM_GLR ((ushort)0x1000) +#define UART_SCCM_GLT ((ushort)0x0800) +#define UART_SCCM_AB ((ushort)0x0200) +#define UART_SCCM_IDL ((ushort)0x0100) +#define UART_SCCM_GRA ((ushort)0x0080) +#define UART_SCCM_BRKE ((ushort)0x0040) +#define UART_SCCM_BRKS ((ushort)0x0020) +#define UART_SCCM_CCR ((ushort)0x0008) +#define UART_SCCM_BSY ((ushort)0x0004) +#define UART_SCCM_TX ((ushort)0x0002) +#define UART_SCCM_RX ((ushort)0x0001) + +/* The SCC PSMR when used as a UART. +*/ +#define SCU_PSMR_FLC ((ushort)0x8000) +#define SCU_PSMR_SL ((ushort)0x4000) +#define SCU_PSMR_CL ((ushort)0x3000) +#define SCU_PSMR_UM ((ushort)0x0c00) +#define SCU_PSMR_FRZ ((ushort)0x0200) +#define SCU_PSMR_RZS ((ushort)0x0100) +#define SCU_PSMR_SYN ((ushort)0x0080) +#define SCU_PSMR_DRT ((ushort)0x0040) +#define SCU_PSMR_PEN ((ushort)0x0010) +#define SCU_PSMR_RPM ((ushort)0x000c) +#define SCU_PSMR_REVP ((ushort)0x0008) +#define SCU_PSMR_TPM ((ushort)0x0003) +#define SCU_PSMR_TEVP ((ushort)0x0002) + +/* CPM Transparent mode SCC. + */ +typedef struct scc_trans { + sccp_t st_genscc; + uint st_cpres; /* Preset CRC */ + uint st_cmask; /* Constant mask for CRC */ +} scc_trans_t; + +#define BD_SCC_TX_LAST ((ushort)0x0800) + +/* How about some FCCs..... +*/ +#define FCC_GFMR_DIAG_NORM ((uint)0x00000000) +#define FCC_GFMR_DIAG_LE ((uint)0x40000000) +#define FCC_GFMR_DIAG_AE ((uint)0x80000000) +#define FCC_GFMR_DIAG_ALE ((uint)0xc0000000) +#define FCC_GFMR_TCI ((uint)0x20000000) +#define FCC_GFMR_TRX ((uint)0x10000000) +#define FCC_GFMR_TTX ((uint)0x08000000) +#define FCC_GFMR_TTX ((uint)0x08000000) +#define FCC_GFMR_CDP ((uint)0x04000000) +#define FCC_GFMR_CTSP ((uint)0x02000000) +#define FCC_GFMR_CDS ((uint)0x01000000) +#define FCC_GFMR_CTSS ((uint)0x00800000) +#define FCC_GFMR_SYNL_NONE ((uint)0x00000000) +#define FCC_GFMR_SYNL_AUTO ((uint)0x00004000) +#define FCC_GFMR_SYNL_8 ((uint)0x00008000) +#define FCC_GFMR_SYNL_16 ((uint)0x0000c000) +#define FCC_GFMR_RTSM ((uint)0x00002000) +#define FCC_GFMR_RENC_NRZ ((uint)0x00000000) +#define FCC_GFMR_RENC_NRZI ((uint)0x00000800) +#define FCC_GFMR_REVD ((uint)0x00000400) +#define FCC_GFMR_TENC_NRZ ((uint)0x00000000) +#define FCC_GFMR_TENC_NRZI ((uint)0x00000100) +#define FCC_GFMR_TCRC_16 ((uint)0x00000000) +#define FCC_GFMR_TCRC_32 ((uint)0x00000080) +#define FCC_GFMR_ENR ((uint)0x00000020) +#define FCC_GFMR_ENT ((uint)0x00000010) +#define FCC_GFMR_MODE_ENET ((uint)0x0000000c) +#define FCC_GFMR_MODE_ATM ((uint)0x0000000a) +#define FCC_GFMR_MODE_HDLC ((uint)0x00000000) + +/* Generic FCC parameter ram. +*/ +typedef struct fcc_param { + ushort fcc_riptr; /* Rx Internal temp pointer */ + ushort fcc_tiptr; /* Tx Internal temp pointer */ + ushort fcc_res1; + ushort fcc_mrblr; /* Max receive buffer length, mod 32 bytes */ + uint fcc_rstate; /* Upper byte is Func code, must be set */ + uint fcc_rbase; /* Receive BD base */ + ushort fcc_rbdstat; /* RxBD status */ + ushort fcc_rbdlen; /* RxBD down counter */ + uint fcc_rdptr; /* RxBD internal data pointer */ + uint fcc_tstate; /* Upper byte is Func code, must be set */ + uint fcc_tbase; /* Transmit BD base */ + ushort fcc_tbdstat; /* TxBD status */ + ushort fcc_tbdlen; /* TxBD down counter */ + uint fcc_tdptr; /* TxBD internal data pointer */ + uint fcc_rbptr; /* Rx BD Internal buf pointer */ + uint fcc_tbptr; /* Tx BD Internal buf pointer */ + uint fcc_rcrc; /* Rx temp CRC */ + uint fcc_res2; + uint fcc_tcrc; /* Tx temp CRC */ +} fccp_t; + + +/* Ethernet controller through FCC. +*/ +typedef struct fcc_enet { + fccp_t fen_genfcc; + uint fen_statbuf; /* Internal status buffer */ + uint fen_camptr; /* CAM address */ + uint fen_cmask; /* Constant mask for CRC */ + uint fen_cpres; /* Preset CRC */ + uint fen_crcec; /* CRC Error counter */ + uint fen_alec; /* alignment error counter */ + uint fen_disfc; /* discard frame counter */ + ushort fen_retlim; /* Retry limit */ + ushort fen_retcnt; /* Retry counter */ + ushort fen_pper; /* Persistence */ + ushort fen_boffcnt; /* backoff counter */ + uint fen_gaddrh; /* Group address filter, high 32-bits */ + uint fen_gaddrl; /* Group address filter, low 32-bits */ + ushort fen_tfcstat; /* out of sequence TxBD */ + ushort fen_tfclen; + uint fen_tfcptr; + ushort fen_mflr; /* Maximum frame length (1518) */ + ushort fen_paddrh; /* MAC address */ + ushort fen_paddrm; + ushort fen_paddrl; + ushort fen_ibdcount; /* Internal BD counter */ + ushort fen_ibdstart; /* Internal BD start pointer */ + ushort fen_ibdend; /* Internal BD end pointer */ + ushort fen_txlen; /* Internal Tx frame length counter */ + uint fen_ibdbase[8]; /* Internal use */ + uint fen_iaddrh; /* Individual address filter */ + uint fen_iaddrl; + ushort fen_minflr; /* Minimum frame length (64) */ + ushort fen_taddrh; /* Filter transfer MAC address */ + ushort fen_taddrm; + ushort fen_taddrl; + ushort fen_padptr; /* Pointer to pad byte buffer */ + ushort fen_cftype; /* control frame type */ + ushort fen_cfrange; /* control frame range */ + ushort fen_maxb; /* maximum BD count */ + ushort fen_maxd1; /* Max DMA1 length (1520) */ + ushort fen_maxd2; /* Max DMA2 length (1520) */ + ushort fen_maxd; /* internal max DMA count */ + ushort fen_dmacnt; /* internal DMA counter */ + uint fen_octc; /* Total octect counter */ + uint fen_colc; /* Total collision counter */ + uint fen_broc; /* Total broadcast packet counter */ + uint fen_mulc; /* Total multicast packet count */ + uint fen_uspc; /* Total packets < 64 bytes */ + uint fen_frgc; /* Total packets < 64 bytes with errors */ + uint fen_ospc; /* Total packets > 1518 */ + uint fen_jbrc; /* Total packets > 1518 with errors */ + uint fen_p64c; /* Total packets == 64 bytes */ + uint fen_p65c; /* Total packets 64 < bytes <= 127 */ + uint fen_p128c; /* Total packets 127 < bytes <= 255 */ + uint fen_p256c; /* Total packets 256 < bytes <= 511 */ + uint fen_p512c; /* Total packets 512 < bytes <= 1023 */ + uint fen_p1024c; /* Total packets 1024 < bytes <= 1518 */ + uint fen_cambuf; /* Internal CAM buffer poiner */ + ushort fen_rfthr; /* Received frames threshold */ + ushort fen_rfcnt; /* Received frames count */ +} fcc_enet_t; + +/* FCC Event/Mask register as used by Ethernet. +*/ +#define FCC_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */ +#define FCC_ENET_RXC ((ushort)0x0040) /* Control Frame Received */ +#define FCC_ENET_TXC ((ushort)0x0020) /* Out of seq. Tx sent */ +#define FCC_ENET_TXE ((ushort)0x0010) /* Transmit Error */ +#define FCC_ENET_RXF ((ushort)0x0008) /* Full frame received */ +#define FCC_ENET_BSY ((ushort)0x0004) /* Busy. Rx Frame dropped */ +#define FCC_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */ +#define FCC_ENET_RXB ((ushort)0x0001) /* A buffer was received */ + +/* FCC Mode Register (FPSMR) as used by Ethernet. +*/ +#define FCC_PSMR_HBC ((uint)0x80000000) /* Enable heartbeat */ +#define FCC_PSMR_FC ((uint)0x40000000) /* Force Collision */ +#define FCC_PSMR_SBT ((uint)0x20000000) /* Stop backoff timer */ +#define FCC_PSMR_LPB ((uint)0x10000000) /* Local protect. 1 = FDX */ +#define FCC_PSMR_LCW ((uint)0x08000000) /* Late collision select */ +#define FCC_PSMR_FDE ((uint)0x04000000) /* Full Duplex Enable */ +#define FCC_PSMR_MON ((uint)0x02000000) /* RMON Enable */ +#define FCC_PSMR_PRO ((uint)0x00400000) /* Promiscuous Enable */ +#define FCC_PSMR_FCE ((uint)0x00200000) /* Flow Control Enable */ +#define FCC_PSMR_RSH ((uint)0x00100000) /* Receive Short Frames */ +#define FCC_PSMR_CAM ((uint)0x00000400) /* CAM enable */ +#define FCC_PSMR_BRO ((uint)0x00000200) /* Broadcast pkt discard */ +#define FCC_PSMR_ENCRC ((uint)0x00000080) /* Use 32-bit CRC */ + +/* IIC parameter RAM. +*/ +typedef struct iic { + ushort iic_rbase; /* Rx Buffer descriptor base address */ + ushort iic_tbase; /* Tx Buffer descriptor base address */ + u_char iic_rfcr; /* Rx function code */ + u_char iic_tfcr; /* Tx function code */ + ushort iic_mrblr; /* Max receive buffer length */ + uint iic_rstate; /* Internal */ + uint iic_rdp; /* Internal */ + ushort iic_rbptr; /* Internal */ + ushort iic_rbc; /* Internal */ + uint iic_rxtmp; /* Internal */ + uint iic_tstate; /* Internal */ + uint iic_tdp; /* Internal */ + ushort iic_tbptr; /* Internal */ + ushort iic_tbc; /* Internal */ + uint iic_txtmp; /* Internal */ +} iic_t; + +/* SPI parameter RAM. +*/ +typedef struct spi { + ushort spi_rbase; /* Rx Buffer descriptor base address */ + ushort spi_tbase; /* Tx Buffer descriptor base address */ + u_char spi_rfcr; /* Rx function code */ + u_char spi_tfcr; /* Tx function code */ + ushort spi_mrblr; /* Max receive buffer length */ + uint spi_rstate; /* Internal */ + uint spi_rdp; /* Internal */ + ushort spi_rbptr; /* Internal */ + ushort spi_rbc; /* Internal */ + uint spi_rxtmp; /* Internal */ + uint spi_tstate; /* Internal */ + uint spi_tdp; /* Internal */ + ushort spi_tbptr; /* Internal */ + ushort spi_tbc; /* Internal */ + uint spi_txtmp; /* Internal */ + uint spi_res; /* Tx temp. */ + uint spi_res1[4]; /* SDMA temp. */ +} spi_t; + +/* SPI Mode register. +*/ +#define SPMODE_LOOP ((ushort)0x4000) /* Loopback */ +#define SPMODE_CI ((ushort)0x2000) /* Clock Invert */ +#define SPMODE_CP ((ushort)0x1000) /* Clock Phase */ +#define SPMODE_DIV16 ((ushort)0x0800) /* BRG/16 mode */ +#define SPMODE_REV ((ushort)0x0400) /* Reversed Data */ +#define SPMODE_MSTR ((ushort)0x0200) /* SPI Master */ +#define SPMODE_EN ((ushort)0x0100) /* Enable */ +#define SPMODE_LENMSK ((ushort)0x00f0) /* character length */ +#define SPMODE_PMMSK ((ushort)0x000f) /* prescale modulus */ + +#define SPMODE_LEN(x) ((((x)-1)&0xF)<<4) +#define SPMODE_PM(x) ((x) &0xF) + +#define SPI_EB ((u_char)0x10) /* big endian byte order */ + +#define BD_IIC_START ((ushort)0x0400) + +/* IDMA parameter RAM +*/ +typedef struct idma { + ushort ibase; /* IDMA buffer descriptor table base address */ + ushort dcm; /* DMA channel mode */ + ushort ibdptr; /* IDMA current buffer descriptor pointer */ + ushort dpr_buf; /* IDMA transfer buffer base address */ + ushort buf_inv; /* internal buffer inventory */ + ushort ss_max; /* steady-state maximum transfer size */ + ushort dpr_in_ptr; /* write pointer inside the internal buffer */ + ushort sts; /* source transfer size */ + ushort dpr_out_ptr; /* read pointer inside the internal buffer */ + ushort seob; /* source end of burst */ + ushort deob; /* destination end of burst */ + ushort dts; /* destination transfer size */ + ushort ret_add; /* return address when working in ERM=1 mode */ + ushort res0; /* reserved */ + uint bd_cnt; /* internal byte count */ + uint s_ptr; /* source internal data pointer */ + uint d_ptr; /* destination internal data pointer */ + uint istate; /* internal state */ + u_char res1[20]; /* pad to 64-byte length */ +} idma_t; + +/* DMA channel mode bit fields +*/ +#define IDMA_DCM_FB ((ushort)0x8000) /* fly-by mode */ +#define IDMA_DCM_LP ((ushort)0x4000) /* low priority */ +#define IDMA_DCM_TC2 ((ushort)0x0400) /* value driven on TC[2] */ +#define IDMA_DCM_DMA_WRAP_MASK ((ushort)0x01c0) /* mask for DMA wrap */ +#define IDMA_DCM_DMA_WRAP_64 ((ushort)0x0000) /* 64-byte DMA xfer buffer */ +#define IDMA_DCM_DMA_WRAP_128 ((ushort)0x0040) /* 128-byte DMA xfer buffer */ +#define IDMA_DCM_DMA_WRAP_256 ((ushort)0x0080) /* 256-byte DMA xfer buffer */ +#define IDMA_DCM_DMA_WRAP_512 ((ushort)0x00c0) /* 512-byte DMA xfer buffer */ +#define IDMA_DCM_DMA_WRAP_1024 ((ushort)0x0100) /* 1024-byte DMA xfer buffer */ +#define IDMA_DCM_DMA_WRAP_2048 ((ushort)0x0140) /* 2048-byte DMA xfer buffer */ +#define IDMA_DCM_SINC ((ushort)0x0020) /* source inc addr */ +#define IDMA_DCM_DINC ((ushort)0x0010) /* destination inc addr */ +#define IDMA_DCM_ERM ((ushort)0x0008) /* external request mode */ +#define IDMA_DCM_DT ((ushort)0x0004) /* DONE treatment */ +#define IDMA_DCM_SD_MASK ((ushort)0x0003) /* mask for SD bit field */ +#define IDMA_DCM_SD_MEM2MEM ((ushort)0x0000) /* memory-to-memory xfer */ +#define IDMA_DCM_SD_PER2MEM ((ushort)0x0002) /* peripheral-to-memory xfer */ +#define IDMA_DCM_SD_MEM2PER ((ushort)0x0001) /* memory-to-peripheral xfer */ + +/* IDMA Buffer Descriptors +*/ +typedef struct idma_bd { + uint flags; + uint len; /* data length */ + uint src; /* source data buffer pointer */ + uint dst; /* destination data buffer pointer */ +} idma_bd_t; + +/* IDMA buffer descriptor flag bit fields +*/ +#define IDMA_BD_V ((uint)0x80000000) /* valid */ +#define IDMA_BD_W ((uint)0x20000000) /* wrap */ +#define IDMA_BD_I ((uint)0x10000000) /* interrupt */ +#define IDMA_BD_L ((uint)0x08000000) /* last */ +#define IDMA_BD_CM ((uint)0x02000000) /* continuous mode */ +#define IDMA_BD_SDN ((uint)0x00400000) /* source done */ +#define IDMA_BD_DDN ((uint)0x00200000) /* destination done */ +#define IDMA_BD_DGBL ((uint)0x00100000) /* destination global */ +#define IDMA_BD_DBO_LE ((uint)0x00040000) /* little-end dest byte order */ +#define IDMA_BD_DBO_BE ((uint)0x00080000) /* big-end dest byte order */ +#define IDMA_BD_DDTB ((uint)0x00010000) /* destination data bus */ +#define IDMA_BD_SGBL ((uint)0x00002000) /* source global */ +#define IDMA_BD_SBO_LE ((uint)0x00000800) /* little-end src byte order */ +#define IDMA_BD_SBO_BE ((uint)0x00001000) /* big-end src byte order */ +#define IDMA_BD_SDTB ((uint)0x00000200) /* source data bus */ + +/* per-channel IDMA registers +*/ +typedef struct im_idma { + u_char idsr; /* IDMAn event status register */ + u_char res0[3]; + u_char idmr; /* IDMAn event mask register */ + u_char res1[3]; +} im_idma_t; + +/* IDMA event register bit fields +*/ +#define IDMA_EVENT_SC ((unsigned char)0x08) /* stop completed */ +#define IDMA_EVENT_OB ((unsigned char)0x04) /* out of buffers */ +#define IDMA_EVENT_EDN ((unsigned char)0x02) /* external DONE asserted */ +#define IDMA_EVENT_BC ((unsigned char)0x01) /* buffer descriptor complete */ + +/* RISC Controller Configuration Register (RCCR) bit fields +*/ +#define RCCR_TIME ((uint)0x80000000) /* timer enable */ +#define RCCR_TIMEP_MASK ((uint)0x3f000000) /* mask for timer period bit field */ +#define RCCR_DR0M ((uint)0x00800000) /* IDMA0 request mode */ +#define RCCR_DR1M ((uint)0x00400000) /* IDMA1 request mode */ +#define RCCR_DR2M ((uint)0x00000080) /* IDMA2 request mode */ +#define RCCR_DR3M ((uint)0x00000040) /* IDMA3 request mode */ +#define RCCR_DR0QP_MASK ((uint)0x00300000) /* mask for IDMA0 req priority */ +#define RCCR_DR0QP_HIGH ((uint)0x00000000) /* IDMA0 has high req priority */ +#define RCCR_DR0QP_MED ((uint)0x00100000) /* IDMA0 has medium req priority */ +#define RCCR_DR0QP_LOW ((uint)0x00200000) /* IDMA0 has low req priority */ +#define RCCR_DR1QP_MASK ((uint)0x00030000) /* mask for IDMA1 req priority */ +#define RCCR_DR1QP_HIGH ((uint)0x00000000) /* IDMA1 has high req priority */ +#define RCCR_DR1QP_MED ((uint)0x00010000) /* IDMA1 has medium req priority */ +#define RCCR_DR1QP_LOW ((uint)0x00020000) /* IDMA1 has low req priority */ +#define RCCR_DR2QP_MASK ((uint)0x00000030) /* mask for IDMA2 req priority */ +#define RCCR_DR2QP_HIGH ((uint)0x00000000) /* IDMA2 has high req priority */ +#define RCCR_DR2QP_MED ((uint)0x00000010) /* IDMA2 has medium req priority */ +#define RCCR_DR2QP_LOW ((uint)0x00000020) /* IDMA2 has low req priority */ +#define RCCR_DR3QP_MASK ((uint)0x00000003) /* mask for IDMA3 req priority */ +#define RCCR_DR3QP_HIGH ((uint)0x00000000) /* IDMA3 has high req priority */ +#define RCCR_DR3QP_MED ((uint)0x00000001) /* IDMA3 has medium req priority */ +#define RCCR_DR3QP_LOW ((uint)0x00000002) /* IDMA3 has low req priority */ +#define RCCR_EIE ((uint)0x00080000) /* external interrupt enable */ +#define RCCR_SCD ((uint)0x00040000) /* scheduler configuration */ +#define RCCR_ERAM_MASK ((uint)0x0000e000) /* mask for enable RAM microcode */ +#define RCCR_ERAM_0KB ((uint)0x00000000) /* use 0KB of dpram for microcode */ +#define RCCR_ERAM_2KB ((uint)0x00002000) /* use 2KB of dpram for microcode */ +#define RCCR_ERAM_4KB ((uint)0x00004000) /* use 4KB of dpram for microcode */ +#define RCCR_ERAM_6KB ((uint)0x00006000) /* use 6KB of dpram for microcode */ +#define RCCR_ERAM_8KB ((uint)0x00008000) /* use 8KB of dpram for microcode */ +#define RCCR_ERAM_10KB ((uint)0x0000a000) /* use 10KB of dpram for microcode */ +#define RCCR_ERAM_12KB ((uint)0x0000c000) /* use 12KB of dpram for microcode */ +#define RCCR_EDM0 ((uint)0x00000800) /* DREQ0 edge detect mode */ +#define RCCR_EDM1 ((uint)0x00000400) /* DREQ1 edge detect mode */ +#define RCCR_EDM2 ((uint)0x00000200) /* DREQ2 edge detect mode */ +#define RCCR_EDM3 ((uint)0x00000100) /* DREQ3 edge detect mode */ +#define RCCR_DEM01 ((uint)0x00000008) /* DONE0/DONE1 edge detect mode */ +#define RCCR_DEM23 ((uint)0x00000004) /* DONE2/DONE3 edge detect mode */ + +/*----------------------------------------------------------------------- + * CMXFCR - CMX FCC Clock Route Register + */ +#define CMXFCR_FC1 0x40000000 /* FCC1 connection */ +#define CMXFCR_RF1CS_MSK 0x38000000 /* Receive FCC1 Clock Source Mask */ +#define CMXFCR_TF1CS_MSK 0x07000000 /* Transmit FCC1 Clock Source Mask */ +#define CMXFCR_FC2 0x00400000 /* FCC2 connection */ +#define CMXFCR_RF2CS_MSK 0x00380000 /* Receive FCC2 Clock Source Mask */ +#define CMXFCR_TF2CS_MSK 0x00070000 /* Transmit FCC2 Clock Source Mask */ +#define CMXFCR_FC3 0x00004000 /* FCC3 connection */ +#define CMXFCR_RF3CS_MSK 0x00003800 /* Receive FCC3 Clock Source Mask */ +#define CMXFCR_TF3CS_MSK 0x00000700 /* Transmit FCC3 Clock Source Mask */ + +#define CMXFCR_RF1CS_BRG5 0x00000000 /* Receive FCC1 Clock Source is BRG5 */ +#define CMXFCR_RF1CS_BRG6 0x08000000 /* Receive FCC1 Clock Source is BRG6 */ +#define CMXFCR_RF1CS_BRG7 0x10000000 /* Receive FCC1 Clock Source is BRG7 */ +#define CMXFCR_RF1CS_BRG8 0x18000000 /* Receive FCC1 Clock Source is BRG8 */ +#define CMXFCR_RF1CS_CLK9 0x20000000 /* Receive FCC1 Clock Source is CLK9 */ +#define CMXFCR_RF1CS_CLK10 0x28000000 /* Receive FCC1 Clock Source is CLK10 */ +#define CMXFCR_RF1CS_CLK11 0x30000000 /* Receive FCC1 Clock Source is CLK11 */ +#define CMXFCR_RF1CS_CLK12 0x38000000 /* Receive FCC1 Clock Source is CLK12 */ + +#define CMXFCR_TF1CS_BRG5 0x00000000 /* Transmit FCC1 Clock Source is BRG5 */ +#define CMXFCR_TF1CS_BRG6 0x01000000 /* Transmit FCC1 Clock Source is BRG6 */ +#define CMXFCR_TF1CS_BRG7 0x02000000 /* Transmit FCC1 Clock Source is BRG7 */ +#define CMXFCR_TF1CS_BRG8 0x03000000 /* Transmit FCC1 Clock Source is BRG8 */ +#define CMXFCR_TF1CS_CLK9 0x04000000 /* Transmit FCC1 Clock Source is CLK9 */ +#define CMXFCR_TF1CS_CLK10 0x05000000 /* Transmit FCC1 Clock Source is CLK10 */ +#define CMXFCR_TF1CS_CLK11 0x06000000 /* Transmit FCC1 Clock Source is CLK11 */ +#define CMXFCR_TF1CS_CLK12 0x07000000 /* Transmit FCC1 Clock Source is CLK12 */ + +#define CMXFCR_RF2CS_BRG5 0x00000000 /* Receive FCC2 Clock Source is BRG5 */ +#define CMXFCR_RF2CS_BRG6 0x00080000 /* Receive FCC2 Clock Source is BRG6 */ +#define CMXFCR_RF2CS_BRG7 0x00100000 /* Receive FCC2 Clock Source is BRG7 */ +#define CMXFCR_RF2CS_BRG8 0x00180000 /* Receive FCC2 Clock Source is BRG8 */ +#define CMXFCR_RF2CS_CLK13 0x00200000 /* Receive FCC2 Clock Source is CLK13 */ +#define CMXFCR_RF2CS_CLK14 0x00280000 /* Receive FCC2 Clock Source is CLK14 */ +#define CMXFCR_RF2CS_CLK15 0x00300000 /* Receive FCC2 Clock Source is CLK15 */ +#define CMXFCR_RF2CS_CLK16 0x00380000 /* Receive FCC2 Clock Source is CLK16 */ + +#define CMXFCR_TF2CS_BRG5 0x00000000 /* Transmit FCC2 Clock Source is BRG5 */ +#define CMXFCR_TF2CS_BRG6 0x00010000 /* Transmit FCC2 Clock Source is BRG6 */ +#define CMXFCR_TF2CS_BRG7 0x00020000 /* Transmit FCC2 Clock Source is BRG7 */ +#define CMXFCR_TF2CS_BRG8 0x00030000 /* Transmit FCC2 Clock Source is BRG8 */ +#define CMXFCR_TF2CS_CLK13 0x00040000 /* Transmit FCC2 Clock Source is CLK13 */ +#define CMXFCR_TF2CS_CLK14 0x00050000 /* Transmit FCC2 Clock Source is CLK14 */ +#define CMXFCR_TF2CS_CLK15 0x00060000 /* Transmit FCC2 Clock Source is CLK15 */ +#define CMXFCR_TF2CS_CLK16 0x00070000 /* Transmit FCC2 Clock Source is CLK16 */ + +#define CMXFCR_RF3CS_BRG5 0x00000000 /* Receive FCC3 Clock Source is BRG5 */ +#define CMXFCR_RF3CS_BRG6 0x00000800 /* Receive FCC3 Clock Source is BRG6 */ +#define CMXFCR_RF3CS_BRG7 0x00001000 /* Receive FCC3 Clock Source is BRG7 */ +#define CMXFCR_RF3CS_BRG8 0x00001800 /* Receive FCC3 Clock Source is BRG8 */ +#define CMXFCR_RF3CS_CLK13 0x00002000 /* Receive FCC3 Clock Source is CLK13 */ +#define CMXFCR_RF3CS_CLK14 0x00002800 /* Receive FCC3 Clock Source is CLK14 */ +#define CMXFCR_RF3CS_CLK15 0x00003000 /* Receive FCC3 Clock Source is CLK15 */ +#define CMXFCR_RF3CS_CLK16 0x00003800 /* Receive FCC3 Clock Source is CLK16 */ + +#define CMXFCR_TF3CS_BRG5 0x00000000 /* Transmit FCC3 Clock Source is BRG5 */ +#define CMXFCR_TF3CS_BRG6 0x00000100 /* Transmit FCC3 Clock Source is BRG6 */ +#define CMXFCR_TF3CS_BRG7 0x00000200 /* Transmit FCC3 Clock Source is BRG7 */ +#define CMXFCR_TF3CS_BRG8 0x00000300 /* Transmit FCC3 Clock Source is BRG8 */ +#define CMXFCR_TF3CS_CLK13 0x00000400 /* Transmit FCC3 Clock Source is CLK13 */ +#define CMXFCR_TF3CS_CLK14 0x00000500 /* Transmit FCC3 Clock Source is CLK14 */ +#define CMXFCR_TF3CS_CLK15 0x00000600 /* Transmit FCC3 Clock Source is CLK15 */ +#define CMXFCR_TF3CS_CLK16 0x00000700 /* Transmit FCC3 Clock Source is CLK16 */ + +/*----------------------------------------------------------------------- + * CMXSCR - CMX SCC Clock Route Register + */ +#define CMXSCR_GR1 0x80000000 /* Grant Support of SCC1 */ +#define CMXSCR_SC1 0x40000000 /* SCC1 connection */ +#define CMXSCR_RS1CS_MSK 0x38000000 /* Receive SCC1 Clock Source Mask */ +#define CMXSCR_TS1CS_MSK 0x07000000 /* Transmit SCC1 Clock Source Mask */ +#define CMXSCR_GR2 0x00800000 /* Grant Support of SCC2 */ +#define CMXSCR_SC2 0x00400000 /* SCC2 connection */ +#define CMXSCR_RS2CS_MSK 0x00380000 /* Receive SCC2 Clock Source Mask */ +#define CMXSCR_TS2CS_MSK 0x00070000 /* Transmit SCC2 Clock Source Mask */ +#define CMXSCR_GR3 0x00008000 /* Grant Support of SCC3 */ +#define CMXSCR_SC3 0x00004000 /* SCC3 connection */ +#define CMXSCR_RS3CS_MSK 0x00003800 /* Receive SCC3 Clock Source Mask */ +#define CMXSCR_TS3CS_MSK 0x00000700 /* Transmit SCC3 Clock Source Mask */ +#define CMXSCR_GR4 0x00000080 /* Grant Support of SCC4 */ +#define CMXSCR_SC4 0x00000040 /* SCC4 connection */ +#define CMXSCR_RS4CS_MSK 0x00000038 /* Receive SCC4 Clock Source Mask */ +#define CMXSCR_TS4CS_MSK 0x00000007 /* Transmit SCC4 Clock Source Mask */ + +#define CMXSCR_RS1CS_BRG1 0x00000000 /* SCC1 Rx Clock Source is BRG1 */ +#define CMXSCR_RS1CS_BRG2 0x08000000 /* SCC1 Rx Clock Source is BRG2 */ +#define CMXSCR_RS1CS_BRG3 0x10000000 /* SCC1 Rx Clock Source is BRG3 */ +#define CMXSCR_RS1CS_BRG4 0x18000000 /* SCC1 Rx Clock Source is BRG4 */ +#define CMXSCR_RS1CS_CLK11 0x20000000 /* SCC1 Rx Clock Source is CLK11 */ +#define CMXSCR_RS1CS_CLK12 0x28000000 /* SCC1 Rx Clock Source is CLK12 */ +#define CMXSCR_RS1CS_CLK3 0x30000000 /* SCC1 Rx Clock Source is CLK3 */ +#define CMXSCR_RS1CS_CLK4 0x38000000 /* SCC1 Rx Clock Source is CLK4 */ + +#define CMXSCR_TS1CS_BRG1 0x00000000 /* SCC1 Tx Clock Source is BRG1 */ +#define CMXSCR_TS1CS_BRG2 0x01000000 /* SCC1 Tx Clock Source is BRG2 */ +#define CMXSCR_TS1CS_BRG3 0x02000000 /* SCC1 Tx Clock Source is BRG3 */ +#define CMXSCR_TS1CS_BRG4 0x03000000 /* SCC1 Tx Clock Source is BRG4 */ +#define CMXSCR_TS1CS_CLK11 0x04000000 /* SCC1 Tx Clock Source is CLK11 */ +#define CMXSCR_TS1CS_CLK12 0x05000000 /* SCC1 Tx Clock Source is CLK12 */ +#define CMXSCR_TS1CS_CLK3 0x06000000 /* SCC1 Tx Clock Source is CLK3 */ +#define CMXSCR_TS1CS_CLK4 0x07000000 /* SCC1 Tx Clock Source is CLK4 */ + +#define CMXSCR_RS2CS_BRG1 0x00000000 /* SCC2 Rx Clock Source is BRG1 */ +#define CMXSCR_RS2CS_BRG2 0x00080000 /* SCC2 Rx Clock Source is BRG2 */ +#define CMXSCR_RS2CS_BRG3 0x00100000 /* SCC2 Rx Clock Source is BRG3 */ +#define CMXSCR_RS2CS_BRG4 0x00180000 /* SCC2 Rx Clock Source is BRG4 */ +#define CMXSCR_RS2CS_CLK11 0x00200000 /* SCC2 Rx Clock Source is CLK11 */ +#define CMXSCR_RS2CS_CLK12 0x00280000 /* SCC2 Rx Clock Source is CLK12 */ +#define CMXSCR_RS2CS_CLK3 0x00300000 /* SCC2 Rx Clock Source is CLK3 */ +#define CMXSCR_RS2CS_CLK4 0x00380000 /* SCC2 Rx Clock Source is CLK4 */ + +#define CMXSCR_TS2CS_BRG1 0x00000000 /* SCC2 Tx Clock Source is BRG1 */ +#define CMXSCR_TS2CS_BRG2 0x00010000 /* SCC2 Tx Clock Source is BRG2 */ +#define CMXSCR_TS2CS_BRG3 0x00020000 /* SCC2 Tx Clock Source is BRG3 */ +#define CMXSCR_TS2CS_BRG4 0x00030000 /* SCC2 Tx Clock Source is BRG4 */ +#define CMXSCR_TS2CS_CLK11 0x00040000 /* SCC2 Tx Clock Source is CLK11 */ +#define CMXSCR_TS2CS_CLK12 0x00050000 /* SCC2 Tx Clock Source is CLK12 */ +#define CMXSCR_TS2CS_CLK3 0x00060000 /* SCC2 Tx Clock Source is CLK3 */ +#define CMXSCR_TS2CS_CLK4 0x00070000 /* SCC2 Tx Clock Source is CLK4 */ + +#define CMXSCR_RS3CS_BRG1 0x00000000 /* SCC3 Rx Clock Source is BRG1 */ +#define CMXSCR_RS3CS_BRG2 0x00000800 /* SCC3 Rx Clock Source is BRG2 */ +#define CMXSCR_RS3CS_BRG3 0x00001000 /* SCC3 Rx Clock Source is BRG3 */ +#define CMXSCR_RS3CS_BRG4 0x00001800 /* SCC3 Rx Clock Source is BRG4 */ +#define CMXSCR_RS3CS_CLK5 0x00002000 /* SCC3 Rx Clock Source is CLK5 */ +#define CMXSCR_RS3CS_CLK6 0x00002800 /* SCC3 Rx Clock Source is CLK6 */ +#define CMXSCR_RS3CS_CLK7 0x00003000 /* SCC3 Rx Clock Source is CLK7 */ +#define CMXSCR_RS3CS_CLK8 0x00003800 /* SCC3 Rx Clock Source is CLK8 */ + +#define CMXSCR_TS3CS_BRG1 0x00000000 /* SCC3 Tx Clock Source is BRG1 */ +#define CMXSCR_TS3CS_BRG2 0x00000100 /* SCC3 Tx Clock Source is BRG2 */ +#define CMXSCR_TS3CS_BRG3 0x00000200 /* SCC3 Tx Clock Source is BRG3 */ +#define CMXSCR_TS3CS_BRG4 0x00000300 /* SCC3 Tx Clock Source is BRG4 */ +#define CMXSCR_TS3CS_CLK5 0x00000400 /* SCC3 Tx Clock Source is CLK5 */ +#define CMXSCR_TS3CS_CLK6 0x00000500 /* SCC3 Tx Clock Source is CLK6 */ +#define CMXSCR_TS3CS_CLK7 0x00000600 /* SCC3 Tx Clock Source is CLK7 */ +#define CMXSCR_TS3CS_CLK8 0x00000700 /* SCC3 Tx Clock Source is CLK8 */ + +#define CMXSCR_RS4CS_BRG1 0x00000000 /* SCC4 Rx Clock Source is BRG1 */ +#define CMXSCR_RS4CS_BRG2 0x00000008 /* SCC4 Rx Clock Source is BRG2 */ +#define CMXSCR_RS4CS_BRG3 0x00000010 /* SCC4 Rx Clock Source is BRG3 */ +#define CMXSCR_RS4CS_BRG4 0x00000018 /* SCC4 Rx Clock Source is BRG4 */ +#define CMXSCR_RS4CS_CLK5 0x00000020 /* SCC4 Rx Clock Source is CLK5 */ +#define CMXSCR_RS4CS_CLK6 0x00000028 /* SCC4 Rx Clock Source is CLK6 */ +#define CMXSCR_RS4CS_CLK7 0x00000030 /* SCC4 Rx Clock Source is CLK7 */ +#define CMXSCR_RS4CS_CLK8 0x00000038 /* SCC4 Rx Clock Source is CLK8 */ + +#define CMXSCR_TS4CS_BRG1 0x00000000 /* SCC4 Tx Clock Source is BRG1 */ +#define CMXSCR_TS4CS_BRG2 0x00000001 /* SCC4 Tx Clock Source is BRG2 */ +#define CMXSCR_TS4CS_BRG3 0x00000002 /* SCC4 Tx Clock Source is BRG3 */ +#define CMXSCR_TS4CS_BRG4 0x00000003 /* SCC4 Tx Clock Source is BRG4 */ +#define CMXSCR_TS4CS_CLK5 0x00000004 /* SCC4 Tx Clock Source is CLK5 */ +#define CMXSCR_TS4CS_CLK6 0x00000005 /* SCC4 Tx Clock Source is CLK6 */ +#define CMXSCR_TS4CS_CLK7 0x00000006 /* SCC4 Tx Clock Source is CLK7 */ +#define CMXSCR_TS4CS_CLK8 0x00000007 /* SCC4 Tx Clock Source is CLK8 */ + +/*----------------------------------------------------------------------- + * SIUMCR - SIU Module Configuration Register 4-31 + */ +#define SIUMCR_BBD 0x80000000 /* Bus Busy Disable */ +#define SIUMCR_ESE 0x40000000 /* External Snoop Enable */ +#define SIUMCR_PBSE 0x20000000 /* Parity Byte Select Enable */ +#define SIUMCR_CDIS 0x10000000 /* Core Disable */ +#define SIUMCR_DPPC00 0x00000000 /* Data Parity Pins Configuration*/ +#define SIUMCR_DPPC01 0x04000000 /* - " - */ +#define SIUMCR_DPPC10 0x08000000 /* - " - */ +#define SIUMCR_DPPC11 0x0c000000 /* - " - */ +#define SIUMCR_L2CPC00 0x00000000 /* L2 Cache Pins Configuration */ +#define SIUMCR_L2CPC01 0x01000000 /* - " - */ +#define SIUMCR_L2CPC10 0x02000000 /* - " - */ +#define SIUMCR_L2CPC11 0x03000000 /* - " - */ +#define SIUMCR_LBPC00 0x00000000 /* Local Bus Pins Configuration */ +#define SIUMCR_LBPC01 0x00400000 /* - " - */ +#define SIUMCR_LBPC10 0x00800000 /* - " - */ +#define SIUMCR_LBPC11 0x00c00000 /* - " - */ +#define SIUMCR_APPC00 0x00000000 /* Address Parity Pins Configuration*/ +#define SIUMCR_APPC01 0x00100000 /* - " - */ +#define SIUMCR_APPC10 0x00200000 /* - " - */ +#define SIUMCR_APPC11 0x00300000 /* - " - */ +#define SIUMCR_CS10PC00 0x00000000 /* CS10 Pin Configuration */ +#define SIUMCR_CS10PC01 0x00040000 /* - " - */ +#define SIUMCR_CS10PC10 0x00080000 /* - " - */ +#define SIUMCR_CS10PC11 0x000c0000 /* - " - */ +#define SIUMCR_BCTLC00 0x00000000 /* Buffer Control Configuration */ +#define SIUMCR_BCTLC01 0x00010000 /* - " - */ +#define SIUMCR_BCTLC10 0x00020000 /* - " - */ +#define SIUMCR_BCTLC11 0x00030000 /* - " - */ +#define SIUMCR_MMR00 0x00000000 /* Mask Masters Requests */ +#define SIUMCR_MMR01 0x00004000 /* - " - */ +#define SIUMCR_MMR10 0x00008000 /* - " - */ +#define SIUMCR_MMR11 0x0000c000 /* - " - */ +#define SIUMCR_LPBSE 0x00002000 /* LocalBus Parity Byte Select Enable*/ + +/*----------------------------------------------------------------------- + * SCCR - System Clock Control Register 9-8 +*/ +#define SCCR_PCI_MODE 0x00000100 /* PCI Mode */ +#define SCCR_PCI_MODCK 0x00000080 /* Value of PCI_MODCK pin */ +#define SCCR_PCIDF_MSK 0x00000078 /* PCI division factor */ +#define SCCR_PCIDF_SHIFT 3 + +#ifndef CPM_IMMR_OFFSET +#define CPM_IMMR_OFFSET 0x101a8 +#endif + +#define FCC_PSMR_RMII ((uint)0x00020000) /* Use RMII interface */ + +/* FCC iop & clock configuration. BSP code is responsible to define Fx_RXCLK & Fx_TXCLK + * in order to use clock-computing stuff below for the FCC x + */ + +/* Automatically generates register configurations */ +#define PC_CLK(x) ((uint)(1<<(x-1))) /* FCC CLK I/O ports */ + +#define CMXFCR_RF1CS(x) ((uint)((x-5)<<27)) /* FCC1 Receive Clock Source */ +#define CMXFCR_TF1CS(x) ((uint)((x-5)<<24)) /* FCC1 Transmit Clock Source */ +#define CMXFCR_RF2CS(x) ((uint)((x-9)<<19)) /* FCC2 Receive Clock Source */ +#define CMXFCR_TF2CS(x) ((uint)((x-9)<<16)) /* FCC2 Transmit Clock Source */ +#define CMXFCR_RF3CS(x) ((uint)((x-9)<<11)) /* FCC3 Receive Clock Source */ +#define CMXFCR_TF3CS(x) ((uint)((x-9)<<8)) /* FCC3 Transmit Clock Source */ + +#define PC_F1RXCLK PC_CLK(F1_RXCLK) +#define PC_F1TXCLK PC_CLK(F1_TXCLK) +#define CMX1_CLK_ROUTE (CMXFCR_RF1CS(F1_RXCLK) | CMXFCR_TF1CS(F1_TXCLK)) +#define CMX1_CLK_MASK ((uint)0xff000000) + +#define PC_F2RXCLK PC_CLK(F2_RXCLK) +#define PC_F2TXCLK PC_CLK(F2_TXCLK) +#define CMX2_CLK_ROUTE (CMXFCR_RF2CS(F2_RXCLK) | CMXFCR_TF2CS(F2_TXCLK)) +#define CMX2_CLK_MASK ((uint)0x00ff0000) + +#define PC_F3RXCLK PC_CLK(F3_RXCLK) +#define PC_F3TXCLK PC_CLK(F3_TXCLK) +#define CMX3_CLK_ROUTE (CMXFCR_RF3CS(F3_RXCLK) | CMXFCR_TF3CS(F3_TXCLK)) +#define CMX3_CLK_MASK ((uint)0x0000ff00) + +#define CPMUX_CLK_MASK (CMX3_CLK_MASK | CMX2_CLK_MASK) +#define CPMUX_CLK_ROUTE (CMX3_CLK_ROUTE | CMX2_CLK_ROUTE) + +#define CLK_TRX (PC_F3TXCLK | PC_F3RXCLK | PC_F2TXCLK | PC_F2RXCLK) + +/* I/O Pin assignment for FCC1. I don't yet know the best way to do this, + * but there is little variation among the choices. + */ +#define PA1_COL 0x00000001U +#define PA1_CRS 0x00000002U +#define PA1_TXER 0x00000004U +#define PA1_TXEN 0x00000008U +#define PA1_RXDV 0x00000010U +#define PA1_RXER 0x00000020U +#define PA1_TXDAT 0x00003c00U +#define PA1_RXDAT 0x0003c000U +#define PA1_PSORA0 (PA1_RXDAT | PA1_TXDAT) +#define PA1_PSORA1 (PA1_COL | PA1_CRS | PA1_TXER | PA1_TXEN | \ + PA1_RXDV | PA1_RXER) +#define PA1_DIRA0 (PA1_RXDAT | PA1_CRS | PA1_COL | PA1_RXER | PA1_RXDV) +#define PA1_DIRA1 (PA1_TXDAT | PA1_TXEN | PA1_TXER) + + +/* I/O Pin assignment for FCC2. I don't yet know the best way to do this, + * but there is little variation among the choices. + */ +#define PB2_TXER 0x00000001U +#define PB2_RXDV 0x00000002U +#define PB2_TXEN 0x00000004U +#define PB2_RXER 0x00000008U +#define PB2_COL 0x00000010U +#define PB2_CRS 0x00000020U +#define PB2_TXDAT 0x000003c0U +#define PB2_RXDAT 0x00003c00U +#define PB2_PSORB0 (PB2_RXDAT | PB2_TXDAT | PB2_CRS | PB2_COL | \ + PB2_RXER | PB2_RXDV | PB2_TXER) +#define PB2_PSORB1 (PB2_TXEN) +#define PB2_DIRB0 (PB2_RXDAT | PB2_CRS | PB2_COL | PB2_RXER | PB2_RXDV) +#define PB2_DIRB1 (PB2_TXDAT | PB2_TXEN | PB2_TXER) + + +/* I/O Pin assignment for FCC3. I don't yet know the best way to do this, + * but there is little variation among the choices. + */ +#define PB3_RXDV 0x00004000U +#define PB3_RXER 0x00008000U +#define PB3_TXER 0x00010000U +#define PB3_TXEN 0x00020000U +#define PB3_COL 0x00040000U +#define PB3_CRS 0x00080000U +#define PB3_TXDAT 0x0f000000U +#define PC3_TXDAT 0x00000010U +#define PB3_RXDAT 0x00f00000U +#define PB3_PSORB0 (PB3_RXDAT | PB3_TXDAT | PB3_CRS | PB3_COL | \ + PB3_RXER | PB3_RXDV | PB3_TXER | PB3_TXEN) +#define PB3_PSORB1 0 +#define PB3_DIRB0 (PB3_RXDAT | PB3_CRS | PB3_COL | PB3_RXER | PB3_RXDV) +#define PB3_DIRB1 (PB3_TXDAT | PB3_TXEN | PB3_TXER) +#define PC3_DIRC1 (PC3_TXDAT) + +/* Handy macro to specify mem for FCCs*/ +#define FCC_MEM_OFFSET(x) (CPM_FCC_SPECIAL_BASE + (x*128)) +#define FCC1_MEM_OFFSET FCC_MEM_OFFSET(0) +#define FCC2_MEM_OFFSET FCC_MEM_OFFSET(1) +#define FCC3_MEM_OFFSET FCC_MEM_OFFSET(2) + +/* Clocks and GRG's */ + +enum cpm_clk_dir { + CPM_CLK_RX, + CPM_CLK_TX, + CPM_CLK_RTX +}; + +enum cpm_clk_target { + CPM_CLK_SCC1, + CPM_CLK_SCC2, + CPM_CLK_SCC3, + CPM_CLK_SCC4, + CPM_CLK_FCC1, + CPM_CLK_FCC2, + CPM_CLK_FCC3, + CPM_CLK_SMC1, + CPM_CLK_SMC2, +}; + +enum cpm_clk { + CPM_CLK_NONE = 0, + CPM_BRG1, /* Baud Rate Generator 1 */ + CPM_BRG2, /* Baud Rate Generator 2 */ + CPM_BRG3, /* Baud Rate Generator 3 */ + CPM_BRG4, /* Baud Rate Generator 4 */ + CPM_BRG5, /* Baud Rate Generator 5 */ + CPM_BRG6, /* Baud Rate Generator 6 */ + CPM_BRG7, /* Baud Rate Generator 7 */ + CPM_BRG8, /* Baud Rate Generator 8 */ + CPM_CLK1, /* Clock 1 */ + CPM_CLK2, /* Clock 2 */ + CPM_CLK3, /* Clock 3 */ + CPM_CLK4, /* Clock 4 */ + CPM_CLK5, /* Clock 5 */ + CPM_CLK6, /* Clock 6 */ + CPM_CLK7, /* Clock 7 */ + CPM_CLK8, /* Clock 8 */ + CPM_CLK9, /* Clock 9 */ + CPM_CLK10, /* Clock 10 */ + CPM_CLK11, /* Clock 11 */ + CPM_CLK12, /* Clock 12 */ + CPM_CLK13, /* Clock 13 */ + CPM_CLK14, /* Clock 14 */ + CPM_CLK15, /* Clock 15 */ + CPM_CLK16, /* Clock 16 */ + CPM_CLK17, /* Clock 17 */ + CPM_CLK18, /* Clock 18 */ + CPM_CLK19, /* Clock 19 */ + CPM_CLK20, /* Clock 20 */ + CPM_CLK_DUMMY +}; + +extern int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode); +extern int cpm2_smc_clk_setup(enum cpm_clk_target target, int clock); + +#define CPM_PIN_INPUT 0 +#define CPM_PIN_OUTPUT 1 +#define CPM_PIN_PRIMARY 0 +#define CPM_PIN_SECONDARY 2 +#define CPM_PIN_GPIO 4 +#define CPM_PIN_OPENDRAIN 8 + +void cpm2_set_pin(int port, int pin, int flags); + +#endif /* __CPM2__ */ +#endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/cputable.h b/include/asm-powerpc/cputable.h index 3dc8e2dfca8..ae093ef6836 100644 --- a/include/asm-powerpc/cputable.h +++ b/include/asm-powerpc/cputable.h @@ -57,6 +57,7 @@ enum powerpc_pmc_type { PPC_PMC_PA6T = 2, }; +/* NOTE WELL: Update identify_cpu() if fields are added or removed! */ struct cpu_spec { /* CPU is matched via (PVR & pvr_mask) == pvr_value */ unsigned int pvr_mask; @@ -136,6 +137,7 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start, #define CPU_FTR_REAL_LE ASM_CONST(0x0000000000400000) #define CPU_FTR_FPU_UNAVAILABLE ASM_CONST(0x0000000000800000) #define CPU_FTR_UNIFIED_ID_CACHE ASM_CONST(0x0000000001000000) +#define CPU_FTR_SPE ASM_CONST(0x0000000002000000) /* * Add the 64-bit processor unique features in the top half of the word; @@ -162,6 +164,7 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start, #define CPU_FTR_CELL_TB_BUG LONG_ASM_CONST(0x0000800000000000) #define CPU_FTR_SPURR LONG_ASM_CONST(0x0001000000000000) #define CPU_FTR_DSCR LONG_ASM_CONST(0x0002000000000000) +#define CPU_FTR_1T_SEGMENT LONG_ASM_CONST(0x0004000000000000) #ifndef __ASSEMBLY__ @@ -180,12 +183,27 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start, #define PPC_FEATURE_HAS_ALTIVEC_COMP 0 #endif -/* We need to mark all pages as being coherent if we're SMP or we - * have a 74[45]x and an MPC107 host bridge. Also 83xx requires - * it for PCI "streaming/prefetch" to work properly. +/* We only set the spe features if the kernel was compiled with spe + * support + */ +#ifdef CONFIG_SPE +#define CPU_FTR_SPE_COMP CPU_FTR_SPE +#define PPC_FEATURE_HAS_SPE_COMP PPC_FEATURE_HAS_SPE +#define PPC_FEATURE_HAS_EFP_SINGLE_COMP PPC_FEATURE_HAS_EFP_SINGLE +#define PPC_FEATURE_HAS_EFP_DOUBLE_COMP PPC_FEATURE_HAS_EFP_DOUBLE +#else +#define CPU_FTR_SPE_COMP 0 +#define PPC_FEATURE_HAS_SPE_COMP 0 +#define PPC_FEATURE_HAS_EFP_SINGLE_COMP 0 +#define PPC_FEATURE_HAS_EFP_DOUBLE_COMP 0 +#endif + +/* We need to mark all pages as being coherent if we're SMP or we have a + * 74[45]x and an MPC107 host bridge. Also 83xx and PowerQUICC II + * require it for PCI "streaming/prefetch" to work properly. */ #if defined(CONFIG_SMP) || defined(CONFIG_MPC10X_BRIDGE) \ - || defined(CONFIG_PPC_83xx) + || defined(CONFIG_PPC_83xx) || defined(CONFIG_8260) #define CPU_FTR_COMMON CPU_FTR_NEED_COHERENT #else #define CPU_FTR_COMMON 0 @@ -297,7 +315,7 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start, CPU_FTR_PPC_LE) #define CPU_FTRS_82XX (CPU_FTR_COMMON | \ CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB) -#define CPU_FTRS_G2_LE (CPU_FTR_MAYBE_CAN_DOZE | \ +#define CPU_FTRS_G2_LE (CPU_FTR_COMMON | CPU_FTR_MAYBE_CAN_DOZE | \ CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS) #define CPU_FTRS_E300 (CPU_FTR_MAYBE_CAN_DOZE | \ CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS | \ @@ -310,10 +328,12 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start, #define CPU_FTRS_8XX (CPU_FTR_USE_TB) #define CPU_FTRS_40X (CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN) #define CPU_FTRS_44X (CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN) -#define CPU_FTRS_E200 (CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN | \ - CPU_FTR_COHERENT_ICACHE | CPU_FTR_UNIFIED_ID_CACHE) -#define CPU_FTRS_E500 (CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN) -#define CPU_FTRS_E500_2 (CPU_FTR_USE_TB | \ +#define CPU_FTRS_E200 (CPU_FTR_USE_TB | CPU_FTR_SPE_COMP | \ + CPU_FTR_NODSISRALIGN | CPU_FTR_COHERENT_ICACHE | \ + CPU_FTR_UNIFIED_ID_CACHE) +#define CPU_FTRS_E500 (CPU_FTR_USE_TB | CPU_FTR_SPE_COMP | \ + CPU_FTR_NODSISRALIGN) +#define CPU_FTRS_E500_2 (CPU_FTR_USE_TB | CPU_FTR_SPE_COMP | \ CPU_FTR_BIG_PHYS | CPU_FTR_NODSISRALIGN) #define CPU_FTRS_GENERIC_32 (CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN) @@ -355,7 +375,7 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start, #define CPU_FTRS_POSSIBLE \ (CPU_FTRS_POWER3 | CPU_FTRS_RS64 | CPU_FTRS_POWER4 | \ CPU_FTRS_PPC970 | CPU_FTRS_POWER5 | CPU_FTRS_POWER6 | \ - CPU_FTRS_CELL | CPU_FTRS_PA6T) + CPU_FTRS_CELL | CPU_FTRS_PA6T | CPU_FTR_1T_SEGMENT) #else enum { CPU_FTRS_POSSIBLE = diff --git a/include/asm-powerpc/dcr-mmio.h b/include/asm-powerpc/dcr-mmio.h index 5dbfca8dde3..6b82c3ba495 100644 --- a/include/asm-powerpc/dcr-mmio.h +++ b/include/asm-powerpc/dcr-mmio.h @@ -23,7 +23,11 @@ #include <asm/io.h> -typedef struct { void __iomem *token; unsigned int stride; } dcr_host_t; +typedef struct { + void __iomem *token; + unsigned int stride; + unsigned int base; +} dcr_host_t; #define DCR_MAP_OK(host) ((host).token != NULL) diff --git a/include/asm-powerpc/dcr-native.h b/include/asm-powerpc/dcr-native.h index 05af081222f..f41058c0f6c 100644 --- a/include/asm-powerpc/dcr-native.h +++ b/include/asm-powerpc/dcr-native.h @@ -22,11 +22,13 @@ #ifdef __KERNEL__ #ifndef __ASSEMBLY__ -typedef struct {} dcr_host_t; +typedef struct { + unsigned int base; +} dcr_host_t; #define DCR_MAP_OK(host) (1) -#define dcr_map(dev, dcr_n, dcr_c) ((dcr_host_t){}) +#define dcr_map(dev, dcr_n, dcr_c) ((dcr_host_t){ .base = (dcr_n) }) #define dcr_unmap(host, dcr_n, dcr_c) do {} while (0) #define dcr_read(host, dcr_n) mfdcr(dcr_n) #define dcr_write(host, dcr_n, value) mtdcr(dcr_n, value) diff --git a/include/asm-powerpc/dma-mapping.h b/include/asm-powerpc/dma-mapping.h index 744d6bb2411..d05891608f7 100644 --- a/include/asm-powerpc/dma-mapping.h +++ b/include/asm-powerpc/dma-mapping.h @@ -249,8 +249,12 @@ dma_map_single(struct device *dev, void *ptr, size_t size, return virt_to_bus(ptr); } -/* We do nothing. */ -#define dma_unmap_single(dev, addr, size, dir) ((void)0) +static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, + size_t size, + enum dma_data_direction direction) +{ + /* We do nothing. */ +} static inline dma_addr_t dma_map_page(struct device *dev, struct page *page, @@ -264,8 +268,12 @@ dma_map_page(struct device *dev, struct page *page, return page_to_bus(page) + offset; } -/* We do nothing. */ -#define dma_unmap_page(dev, handle, size, dir) ((void)0) +static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address, + size_t size, + enum dma_data_direction direction) +{ + /* We do nothing. */ +} static inline int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, @@ -284,8 +292,12 @@ dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, return nents; } -/* We don't do anything here. */ -#define dma_unmap_sg(dev, sg, nents, dir) ((void)0) +static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg, + int nhwentries, + enum dma_data_direction direction) +{ + /* We don't do anything here. */ +} #endif /* CONFIG_PPC64 */ diff --git a/include/asm-powerpc/elf.h b/include/asm-powerpc/elf.h index de507995c7b..e42820d6d25 100644 --- a/include/asm-powerpc/elf.h +++ b/include/asm-powerpc/elf.h @@ -413,13 +413,8 @@ do { \ /* Notes used in ET_CORE. Note name is "SPU/<fd>/<filename>". */ #define NT_SPU 1 -extern int arch_notes_size(void); -extern void arch_write_notes(struct file *file); - -#define ELF_CORE_EXTRA_NOTES_SIZE arch_notes_size() -#define ELF_CORE_WRITE_EXTRA_NOTES arch_write_notes(file) - #define ARCH_HAVE_EXTRA_ELF_NOTES -#endif /* CONFIG_PPC_CELL */ + +#endif /* CONFIG_SPU_BASE */ #endif /* _ASM_POWERPC_ELF_H */ diff --git a/include/asm-powerpc/exception.h b/include/asm-powerpc/exception.h new file mode 100644 index 00000000000..39abdb02fde --- /dev/null +++ b/include/asm-powerpc/exception.h @@ -0,0 +1,311 @@ +#ifndef _ASM_POWERPC_EXCEPTION_H +#define _ASM_POWERPC_EXCEPTION_H +/* + * Extracted from head_64.S + * + * PowerPC version + * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) + * + * Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP + * Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu> + * Adapted for Power Macintosh by Paul Mackerras. + * Low-level exception handlers and MMU support + * rewritten by Paul Mackerras. + * Copyright (C) 1996 Paul Mackerras. + * + * Adapted for 64bit PowerPC by Dave Engebretsen, Peter Bergner, and + * Mike Corrigan {engebret|bergner|mikejc}@us.ibm.com + * + * This file contains the low-level support and setup for the + * PowerPC-64 platform, including trap and interrupt dispatch. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +/* + * The following macros define the code that appears as + * the prologue to each of the exception handlers. They + * are split into two parts to allow a single kernel binary + * to be used for pSeries and iSeries. + * + * We make as much of the exception code common between native + * exception handlers (including pSeries LPAR) and iSeries LPAR + * implementations as possible. + */ + +#define EX_R9 0 +#define EX_R10 8 +#define EX_R11 16 +#define EX_R12 24 +#define EX_R13 32 +#define EX_SRR0 40 +#define EX_DAR 48 +#define EX_DSISR 56 +#define EX_CCR 60 +#define EX_R3 64 +#define EX_LR 72 + +/* + * We're short on space and time in the exception prolog, so we can't + * use the normal SET_REG_IMMEDIATE macro. Normally we just need the + * low halfword of the address, but for Kdump we need the whole low + * word. + */ +#ifdef CONFIG_CRASH_DUMP +#define LOAD_HANDLER(reg, label) \ + oris reg,reg,(label)@h; /* virt addr of handler ... */ \ + ori reg,reg,(label)@l; /* .. and the rest */ +#else +#define LOAD_HANDLER(reg, label) \ + ori reg,reg,(label)@l; /* virt addr of handler ... */ +#endif + +#define EXCEPTION_PROLOG_1(area) \ + mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \ + std r9,area+EX_R9(r13); /* save r9 - r12 */ \ + std r10,area+EX_R10(r13); \ + std r11,area+EX_R11(r13); \ + std r12,area+EX_R12(r13); \ + mfspr r9,SPRN_SPRG1; \ + std r9,area+EX_R13(r13); \ + mfcr r9 + +/* + * Equal to EXCEPTION_PROLOG_PSERIES, except that it forces 64bit mode. + * The firmware calls the registered system_reset_fwnmi and + * machine_check_fwnmi handlers in 32bit mode if the cpu happens to run + * a 32bit application at the time of the event. + * This firmware bug is present on POWER4 and JS20. + */ +#define EXCEPTION_PROLOG_PSERIES_FORCE_64BIT(area, label) \ + EXCEPTION_PROLOG_1(area); \ + clrrdi r12,r13,32; /* get high part of &label */ \ + mfmsr r10; \ + /* force 64bit mode */ \ + li r11,5; /* MSR_SF_LG|MSR_ISF_LG */ \ + rldimi r10,r11,61,0; /* insert into top 3 bits */ \ + /* done 64bit mode */ \ + mfspr r11,SPRN_SRR0; /* save SRR0 */ \ + LOAD_HANDLER(r12,label) \ + ori r10,r10,MSR_IR|MSR_DR|MSR_RI; \ + mtspr SPRN_SRR0,r12; \ + mfspr r12,SPRN_SRR1; /* and SRR1 */ \ + mtspr SPRN_SRR1,r10; \ + rfid; \ + b . /* prevent speculative execution */ + +#define EXCEPTION_PROLOG_PSERIES(area, label) \ + EXCEPTION_PROLOG_1(area); \ + clrrdi r12,r13,32; /* get high part of &label */ \ + mfmsr r10; \ + mfspr r11,SPRN_SRR0; /* save SRR0 */ \ + LOAD_HANDLER(r12,label) \ + ori r10,r10,MSR_IR|MSR_DR|MSR_RI; \ + mtspr SPRN_SRR0,r12; \ + mfspr r12,SPRN_SRR1; /* and SRR1 */ \ + mtspr SPRN_SRR1,r10; \ + rfid; \ + b . /* prevent speculative execution */ + +/* + * The common exception prolog is used for all except a few exceptions + * such as a segment miss on a kernel address. We have to be prepared + * to take another exception from the point where we first touch the + * kernel stack onwards. + * + * On entry r13 points to the paca, r9-r13 are saved in the paca, + * r9 contains the saved CR, r11 and r12 contain the saved SRR0 and + * SRR1, and relocation is on. + */ +#define EXCEPTION_PROLOG_COMMON(n, area) \ + andi. r10,r12,MSR_PR; /* See if coming from user */ \ + mr r10,r1; /* Save r1 */ \ + subi r1,r1,INT_FRAME_SIZE; /* alloc frame on kernel stack */ \ + beq- 1f; \ + ld r1,PACAKSAVE(r13); /* kernel stack to use */ \ +1: cmpdi cr1,r1,0; /* check if r1 is in userspace */ \ + bge- cr1,2f; /* abort if it is */ \ + b 3f; \ +2: li r1,(n); /* will be reloaded later */ \ + sth r1,PACA_TRAP_SAVE(r13); \ + b bad_stack; \ +3: std r9,_CCR(r1); /* save CR in stackframe */ \ + std r11,_NIP(r1); /* save SRR0 in stackframe */ \ + std r12,_MSR(r1); /* save SRR1 in stackframe */ \ + std r10,0(r1); /* make stack chain pointer */ \ + std r0,GPR0(r1); /* save r0 in stackframe */ \ + std r10,GPR1(r1); /* save r1 in stackframe */ \ + ACCOUNT_CPU_USER_ENTRY(r9, r10); \ + std r2,GPR2(r1); /* save r2 in stackframe */ \ + SAVE_4GPRS(3, r1); /* save r3 - r6 in stackframe */ \ + SAVE_2GPRS(7, r1); /* save r7, r8 in stackframe */ \ + ld r9,area+EX_R9(r13); /* move r9, r10 to stackframe */ \ + ld r10,area+EX_R10(r13); \ + std r9,GPR9(r1); \ + std r10,GPR10(r1); \ + ld r9,area+EX_R11(r13); /* move r11 - r13 to stackframe */ \ + ld r10,area+EX_R12(r13); \ + ld r11,area+EX_R13(r13); \ + std r9,GPR11(r1); \ + std r10,GPR12(r1); \ + std r11,GPR13(r1); \ + ld r2,PACATOC(r13); /* get kernel TOC into r2 */ \ + mflr r9; /* save LR in stackframe */ \ + std r9,_LINK(r1); \ + mfctr r10; /* save CTR in stackframe */ \ + std r10,_CTR(r1); \ + lbz r10,PACASOFTIRQEN(r13); \ + mfspr r11,SPRN_XER; /* save XER in stackframe */ \ + std r10,SOFTE(r1); \ + std r11,_XER(r1); \ + li r9,(n)+1; \ + std r9,_TRAP(r1); /* set trap number */ \ + li r10,0; \ + ld r11,exception_marker@toc(r2); \ + std r10,RESULT(r1); /* clear regs->result */ \ + std r11,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame */ + +/* + * Exception vectors. + */ +#define STD_EXCEPTION_PSERIES(n, label) \ + . = n; \ + .globl label##_pSeries; \ +label##_pSeries: \ + HMT_MEDIUM; \ + mtspr SPRN_SPRG1,r13; /* save r13 */ \ + EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common) + +#define HSTD_EXCEPTION_PSERIES(n, label) \ + . = n; \ + .globl label##_pSeries; \ +label##_pSeries: \ + HMT_MEDIUM; \ + mtspr SPRN_SPRG1,r20; /* save r20 */ \ + mfspr r20,SPRN_HSRR0; /* copy HSRR0 to SRR0 */ \ + mtspr SPRN_SRR0,r20; \ + mfspr r20,SPRN_HSRR1; /* copy HSRR0 to SRR0 */ \ + mtspr SPRN_SRR1,r20; \ + mfspr r20,SPRN_SPRG1; /* restore r20 */ \ + mtspr SPRN_SPRG1,r13; /* save r13 */ \ + EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common) + + +#define MASKABLE_EXCEPTION_PSERIES(n, label) \ + . = n; \ + .globl label##_pSeries; \ +label##_pSeries: \ + HMT_MEDIUM; \ + mtspr SPRN_SPRG1,r13; /* save r13 */ \ + mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \ + std r9,PACA_EXGEN+EX_R9(r13); /* save r9, r10 */ \ + std r10,PACA_EXGEN+EX_R10(r13); \ + lbz r10,PACASOFTIRQEN(r13); \ + mfcr r9; \ + cmpwi r10,0; \ + beq masked_interrupt; \ + mfspr r10,SPRN_SPRG1; \ + std r10,PACA_EXGEN+EX_R13(r13); \ + std r11,PACA_EXGEN+EX_R11(r13); \ + std r12,PACA_EXGEN+EX_R12(r13); \ + clrrdi r12,r13,32; /* get high part of &label */ \ + mfmsr r10; \ + mfspr r11,SPRN_SRR0; /* save SRR0 */ \ + LOAD_HANDLER(r12,label##_common) \ + ori r10,r10,MSR_IR|MSR_DR|MSR_RI; \ + mtspr SPRN_SRR0,r12; \ + mfspr r12,SPRN_SRR1; /* and SRR1 */ \ + mtspr SPRN_SRR1,r10; \ + rfid; \ + b . /* prevent speculative execution */ + +#ifdef CONFIG_PPC_ISERIES +#define DISABLE_INTS \ + li r11,0; \ + stb r11,PACASOFTIRQEN(r13); \ +BEGIN_FW_FTR_SECTION; \ + stb r11,PACAHARDIRQEN(r13); \ +END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES); \ +BEGIN_FW_FTR_SECTION; \ + mfmsr r10; \ + ori r10,r10,MSR_EE; \ + mtmsrd r10,1; \ +END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) + +#else +#define DISABLE_INTS \ + li r11,0; \ + stb r11,PACASOFTIRQEN(r13); \ + stb r11,PACAHARDIRQEN(r13) + +#endif /* CONFIG_PPC_ISERIES */ + +#define ENABLE_INTS \ + ld r12,_MSR(r1); \ + mfmsr r11; \ + rlwimi r11,r12,0,MSR_EE; \ + mtmsrd r11,1 + +#define STD_EXCEPTION_COMMON(trap, label, hdlr) \ + .align 7; \ + .globl label##_common; \ +label##_common: \ + EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \ + DISABLE_INTS; \ + bl .save_nvgprs; \ + addi r3,r1,STACK_FRAME_OVERHEAD; \ + bl hdlr; \ + b .ret_from_except + +/* + * Like STD_EXCEPTION_COMMON, but for exceptions that can occur + * in the idle task and therefore need the special idle handling. + */ +#define STD_EXCEPTION_COMMON_IDLE(trap, label, hdlr) \ + .align 7; \ + .globl label##_common; \ +label##_common: \ + EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \ + FINISH_NAP; \ + DISABLE_INTS; \ + bl .save_nvgprs; \ + addi r3,r1,STACK_FRAME_OVERHEAD; \ + bl hdlr; \ + b .ret_from_except + +#define STD_EXCEPTION_COMMON_LITE(trap, label, hdlr) \ + .align 7; \ + .globl label##_common; \ +label##_common: \ + EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \ + FINISH_NAP; \ + DISABLE_INTS; \ +BEGIN_FTR_SECTION \ + bl .ppc64_runlatch_on; \ +END_FTR_SECTION_IFSET(CPU_FTR_CTRL) \ + addi r3,r1,STACK_FRAME_OVERHEAD; \ + bl hdlr; \ + b .ret_from_except_lite + +/* + * When the idle code in power4_idle puts the CPU into NAP mode, + * it has to do so in a loop, and relies on the external interrupt + * and decrementer interrupt entry code to get it out of the loop. + * It sets the _TLF_NAPPING bit in current_thread_info()->local_flags + * to signal that it is in the loop and needs help to get out. + */ +#ifdef CONFIG_PPC_970_NAP +#define FINISH_NAP \ +BEGIN_FTR_SECTION \ + clrrdi r11,r1,THREAD_SHIFT; \ + ld r9,TI_LOCAL_FLAGS(r11); \ + andi. r10,r9,_TLF_NAPPING; \ + bnel power4_fixup_nap; \ +END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP) +#else +#define FINISH_NAP +#endif + +#endif /* _ASM_POWERPC_EXCEPTION_H */ diff --git a/include/asm-powerpc/fs_pd.h b/include/asm-powerpc/fs_pd.h index c624915b757..9361cd5342c 100644 --- a/include/asm-powerpc/fs_pd.h +++ b/include/asm-powerpc/fs_pd.h @@ -19,48 +19,22 @@ #if defined(CONFIG_8260) #include <asm/mpc8260.h> -#elif defined(CONFIG_85xx) -#include <asm/mpc85xx.h> #endif -#define cpm2_map(member) \ -({ \ - u32 offset = offsetof(cpm2_map_t, member); \ - void *addr = ioremap (CPM_MAP_ADDR + offset, \ - sizeof( ((cpm2_map_t*)0)->member)); \ - addr; \ -}) - -#define cpm2_map_size(member, size) \ -({ \ - u32 offset = offsetof(cpm2_map_t, member); \ - void *addr = ioremap (CPM_MAP_ADDR + offset, size); \ - addr; \ -}) - -#define cpm2_unmap(addr) iounmap(addr) +#define cpm2_map(member) (&cpm2_immr->member) +#define cpm2_map_size(member, size) (&cpm2_immr->member) +#define cpm2_unmap(addr) do {} while(0) #endif #ifdef CONFIG_8xx #include <asm/8xx_immap.h> #include <asm/mpc8xx.h> -#define immr_map(member) \ -({ \ - u32 offset = offsetof(immap_t, member); \ - void *addr = ioremap (IMAP_ADDR + offset, \ - sizeof( ((immap_t*)0)->member)); \ - addr; \ -}) - -#define immr_map_size(member, size) \ -({ \ - u32 offset = offsetof(immap_t, member); \ - void *addr = ioremap (IMAP_ADDR + offset, size); \ - addr; \ -}) +extern immap_t __iomem *mpc8xx_immr; -#define immr_unmap(addr) iounmap(addr) +#define immr_map(member) (&mpc8xx_immr->member) +#define immr_map_size(member, size) (&mpc8xx_immr->member) +#define immr_unmap(addr) do {} while (0) #endif static inline int uart_baudrate(void) diff --git a/include/asm-powerpc/highmem.h b/include/asm-powerpc/highmem.h new file mode 100644 index 00000000000..f7b21ee302b --- /dev/null +++ b/include/asm-powerpc/highmem.h @@ -0,0 +1,135 @@ +/* + * highmem.h: virtual kernel memory mappings for high memory + * + * PowerPC version, stolen from the i386 version. + * + * Used in CONFIG_HIGHMEM systems for memory pages which + * are not addressable by direct kernel virtual addresses. + * + * Copyright (C) 1999 Gerhard Wichert, Siemens AG + * Gerhard.Wichert@pdb.siemens.de + * + * + * Redesigned the x86 32-bit VM architecture to deal with + * up to 16 Terrabyte physical memory. With current x86 CPUs + * we now support up to 64 Gigabytes physical RAM. + * + * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com> + */ + +#ifndef _ASM_HIGHMEM_H +#define _ASM_HIGHMEM_H + +#ifdef __KERNEL__ + +#include <linux/init.h> +#include <linux/interrupt.h> +#include <asm/kmap_types.h> +#include <asm/tlbflush.h> +#include <asm/page.h> + +/* undef for production */ +#define HIGHMEM_DEBUG 1 + +extern pte_t *kmap_pte; +extern pgprot_t kmap_prot; +extern pte_t *pkmap_page_table; + +/* + * Right now we initialize only a single pte table. It can be extended + * easily, subsequent pte tables have to be allocated in one physical + * chunk of RAM. + */ +#define PKMAP_BASE CONFIG_HIGHMEM_START +#define LAST_PKMAP (1 << PTE_SHIFT) +#define LAST_PKMAP_MASK (LAST_PKMAP-1) +#define PKMAP_NR(virt) ((virt-PKMAP_BASE) >> PAGE_SHIFT) +#define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT)) + +#define KMAP_FIX_BEGIN (PKMAP_BASE + 0x00400000UL) + +extern void *kmap_high(struct page *page); +extern void kunmap_high(struct page *page); + +static inline void *kmap(struct page *page) +{ + might_sleep(); + if (!PageHighMem(page)) + return page_address(page); + return kmap_high(page); +} + +static inline void kunmap(struct page *page) +{ + BUG_ON(in_interrupt()); + if (!PageHighMem(page)) + return; + kunmap_high(page); +} + +/* + * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap + * gives a more generic (and caching) interface. But kmap_atomic can + * be used in IRQ contexts, so in some (very limited) cases we need + * it. + */ +static inline void *kmap_atomic(struct page *page, enum km_type type) +{ + unsigned int idx; + unsigned long vaddr; + + /* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */ + pagefault_disable(); + if (!PageHighMem(page)) + return page_address(page); + + idx = type + KM_TYPE_NR*smp_processor_id(); + vaddr = KMAP_FIX_BEGIN + idx * PAGE_SIZE; +#ifdef HIGHMEM_DEBUG + BUG_ON(!pte_none(*(kmap_pte+idx))); +#endif + set_pte_at(&init_mm, vaddr, kmap_pte+idx, mk_pte(page, kmap_prot)); + flush_tlb_page(NULL, vaddr); + + return (void*) vaddr; +} + +static inline void kunmap_atomic(void *kvaddr, enum km_type type) +{ +#ifdef HIGHMEM_DEBUG + unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK; + unsigned int idx = type + KM_TYPE_NR*smp_processor_id(); + + if (vaddr < KMAP_FIX_BEGIN) { // FIXME + pagefault_enable(); + return; + } + + BUG_ON(vaddr != KMAP_FIX_BEGIN + idx * PAGE_SIZE); + + /* + * force other mappings to Oops if they'll try to access + * this pte without first remap it + */ + pte_clear(&init_mm, vaddr, kmap_pte+idx); + flush_tlb_page(NULL, vaddr); +#endif + pagefault_enable(); +} + +static inline struct page *kmap_atomic_to_page(void *ptr) +{ + unsigned long idx, vaddr = (unsigned long) ptr; + + if (vaddr < KMAP_FIX_BEGIN) + return virt_to_page(ptr); + + idx = (vaddr - KMAP_FIX_BEGIN) >> PAGE_SHIFT; + return pte_page(kmap_pte[idx]); +} + +#define flush_cache_kmaps() flush_cache_all() + +#endif /* __KERNEL__ */ + +#endif /* _ASM_HIGHMEM_H */ diff --git a/include/asm-powerpc/hydra.h b/include/asm-powerpc/hydra.h new file mode 100644 index 00000000000..1ad4eed07fb --- /dev/null +++ b/include/asm-powerpc/hydra.h @@ -0,0 +1,102 @@ +/* + * include/asm-ppc/hydra.h -- Mac I/O `Hydra' definitions + * + * Copyright (C) 1997 Geert Uytterhoeven + * + * This file is based on the following documentation: + * + * Macintosh Technology in the Common Hardware Reference Platform + * Apple Computer, Inc. + * + * © Copyright 1995 Apple Computer, Inc. All rights reserved. + * + * It's available online from http://chrp.apple.com/MacTech.pdf. + * You can obtain paper copies of this book from computer bookstores or by + * writing Morgan Kaufmann Publishers, Inc., 340 Pine Street, Sixth Floor, San + * Francisco, CA 94104. Reference ISBN 1-55860-393-X. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ + +#ifndef _ASMPPC_HYDRA_H +#define _ASMPPC_HYDRA_H + +#ifdef __KERNEL__ + +struct Hydra { + /* DBDMA Controller Register Space */ + char Pad1[0x30]; + u_int CachePD; + u_int IDs; + u_int Feature_Control; + char Pad2[0x7fc4]; + /* DBDMA Channel Register Space */ + char SCSI_DMA[0x100]; + char Pad3[0x300]; + char SCCA_Tx_DMA[0x100]; + char SCCA_Rx_DMA[0x100]; + char SCCB_Tx_DMA[0x100]; + char SCCB_Rx_DMA[0x100]; + char Pad4[0x7800]; + /* Device Register Space */ + char SCSI[0x1000]; + char ADB[0x1000]; + char SCC_Legacy[0x1000]; + char SCC[0x1000]; + char Pad9[0x2000]; + char VIA[0x2000]; + char Pad10[0x28000]; + char OpenPIC[0x40000]; +}; + +extern volatile struct Hydra __iomem *Hydra; + + + /* + * Feature Control Register + */ + +#define HYDRA_FC_SCC_CELL_EN 0x00000001 /* Enable SCC Clock */ +#define HYDRA_FC_SCSI_CELL_EN 0x00000002 /* Enable SCSI Clock */ +#define HYDRA_FC_SCCA_ENABLE 0x00000004 /* Enable SCC A Lines */ +#define HYDRA_FC_SCCB_ENABLE 0x00000008 /* Enable SCC B Lines */ +#define HYDRA_FC_ARB_BYPASS 0x00000010 /* Bypass Internal Arbiter */ +#define HYDRA_FC_RESET_SCC 0x00000020 /* Reset SCC */ +#define HYDRA_FC_MPIC_ENABLE 0x00000040 /* Enable OpenPIC */ +#define HYDRA_FC_SLOW_SCC_PCLK 0x00000080 /* 1=15.6672, 0=25 MHz */ +#define HYDRA_FC_MPIC_IS_MASTER 0x00000100 /* OpenPIC Master Mode */ + + + /* + * OpenPIC Interrupt Sources + */ + +#define HYDRA_INT_SIO 0 +#define HYDRA_INT_SCSI_DMA 1 +#define HYDRA_INT_SCCA_TX_DMA 2 +#define HYDRA_INT_SCCA_RX_DMA 3 +#define HYDRA_INT_SCCB_TX_DMA 4 +#define HYDRA_INT_SCCB_RX_DMA 5 +#define HYDRA_INT_SCSI 6 +#define HYDRA_INT_SCCA 7 +#define HYDRA_INT_SCCB 8 +#define HYDRA_INT_VIA 9 +#define HYDRA_INT_ADB 10 +#define HYDRA_INT_ADB_NMI 11 +#define HYDRA_INT_EXT1 12 /* PCI IRQW */ +#define HYDRA_INT_EXT2 13 /* PCI IRQX */ +#define HYDRA_INT_EXT3 14 /* PCI IRQY */ +#define HYDRA_INT_EXT4 15 /* PCI IRQZ */ +#define HYDRA_INT_EXT5 16 /* IDE Primay/Secondary */ +#define HYDRA_INT_EXT6 17 /* IDE Secondary */ +#define HYDRA_INT_EXT7 18 /* Power Off Request */ +#define HYDRA_INT_SPARE 19 + +extern int hydra_init(void); +extern void macio_adb_init(void); + +#endif /* __KERNEL__ */ + +#endif /* _ASMPPC_HYDRA_H */ diff --git a/include/asm-powerpc/ide.h b/include/asm-powerpc/ide.h index 0f66f0f82c3..1644e44c875 100644 --- a/include/asm-powerpc/ide.h +++ b/include/asm-powerpc/ide.h @@ -67,7 +67,7 @@ static __inline__ unsigned long ide_default_io_base(int index) #define ide_init_default_irq(base) ide_default_irq(base) #endif -#if (defined CONFIG_APUS || defined CONFIG_BLK_DEV_MPC8xx_IDE ) +#ifdef CONFIG_BLK_DEV_MPC8xx_IDE #define IDE_ARCH_ACK_INTR 1 #define ide_ack_intr(hwif) (hwif->hw.ack_intr ? hwif->hw.ack_intr(hwif) : 1) #endif diff --git a/include/asm-powerpc/immap_86xx.h b/include/asm-powerpc/immap_86xx.h index 59b9e07b8e9..0ad4e653d46 100644 --- a/include/asm-powerpc/immap_86xx.h +++ b/include/asm-powerpc/immap_86xx.h @@ -1,124 +1,135 @@ -/* +/** * MPC86xx Internal Memory Map * - * Author: Jeff Brown + * Authors: Jeff Brown + * Timur Tabi <timur@freescale.com> * - * Copyright 2004 Freescale Semiconductor, Inc + * Copyright 2004,2007 Freescale Semiconductor, Inc * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * + * This header file defines structures for various 86xx SOC devices that are + * used by multiple source files. */ #ifndef __ASM_POWERPC_IMMAP_86XX_H__ #define __ASM_POWERPC_IMMAP_86XX_H__ #ifdef __KERNEL__ -/* Eventually this should define all the IO block registers in 86xx */ +/* Global Utility Registers */ +struct ccsr_guts { + __be32 porpllsr; /* 0x.0000 - POR PLL Ratio Status Register */ + __be32 porbmsr; /* 0x.0004 - POR Boot Mode Status Register */ + __be32 porimpscr; /* 0x.0008 - POR I/O Impedance Status and Control Register */ + __be32 pordevsr; /* 0x.000c - POR I/O Device Status Register */ + __be32 pordbgmsr; /* 0x.0010 - POR Debug Mode Status Register */ + u8 res1[0x20 - 0x14]; + __be32 porcir; /* 0x.0020 - POR Configuration Information Register */ + u8 res2[0x30 - 0x24]; + __be32 gpiocr; /* 0x.0030 - GPIO Control Register */ + u8 res3[0x40 - 0x34]; + __be32 gpoutdr; /* 0x.0040 - General-Purpose Output Data Register */ + u8 res4[0x50 - 0x44]; + __be32 gpindr; /* 0x.0050 - General-Purpose Input Data Register */ + u8 res5[0x60 - 0x54]; + __be32 pmuxcr; /* 0x.0060 - Alternate Function Signal Multiplex Control */ + u8 res6[0x70 - 0x64]; + __be32 devdisr; /* 0x.0070 - Device Disable Control */ + __be32 devdisr2; /* 0x.0074 - Device Disable Control 2 */ + u8 res7[0x80 - 0x78]; + __be32 powmgtcsr; /* 0x.0080 - Power Management Status and Control Register */ + u8 res8[0x90 - 0x84]; + __be32 mcpsumr; /* 0x.0090 - Machine Check Summary Register */ + __be32 rstrscr; /* 0x.0094 - Reset Request Status and Control Register */ + u8 res9[0xA0 - 0x98]; + __be32 pvr; /* 0x.00a0 - Processor Version Register */ + __be32 svr; /* 0x.00a4 - System Version Register */ + u8 res10[0xB0 - 0xA8]; + __be32 rstcr; /* 0x.00b0 - Reset Control Register */ + u8 res11[0xC0 - 0xB4]; + __be32 elbcvselcr; /* 0x.00c0 - eLBC Voltage Select Ctrl Reg */ + u8 res12[0x800 - 0xC4]; + __be32 clkdvdr; /* 0x.0800 - Clock Divide Register */ + u8 res13[0x900 - 0x804]; + __be32 ircr; /* 0x.0900 - Infrared Control Register */ + u8 res14[0x908 - 0x904]; + __be32 dmacr; /* 0x.0908 - DMA Control Register */ + u8 res15[0x914 - 0x90C]; + __be32 elbccr; /* 0x.0914 - eLBC Control Register */ + u8 res16[0xB20 - 0x918]; + __be32 ddr1clkdr; /* 0x.0b20 - DDR1 Clock Disable Register */ + __be32 ddr2clkdr; /* 0x.0b24 - DDR2 Clock Disable Register */ + __be32 ddrclkdr; /* 0x.0b28 - DDR Clock Disable Register */ + u8 res17[0xE00 - 0xB2C]; + __be32 clkocr; /* 0x.0e00 - Clock Out Select Register */ + u8 res18[0xE10 - 0xE04]; + __be32 ddrdllcr; /* 0x.0e10 - DDR DLL Control Register */ + u8 res19[0xE20 - 0xE14]; + __be32 lbcdllcr; /* 0x.0e20 - LBC DLL Control Register */ + u8 res20[0xF04 - 0xE24]; + __be32 srds1cr0; /* 0x.0f04 - SerDes1 Control Register 0 */ + __be32 srds1cr1; /* 0x.0f08 - SerDes1 Control Register 0 */ + u8 res21[0xF40 - 0xF0C]; + __be32 srds2cr0; /* 0x.0f40 - SerDes1 Control Register 0 */ + __be32 srds2cr1; /* 0x.0f44 - SerDes1 Control Register 0 */ +} __attribute__ ((packed)); -/* PCI Registers */ -typedef struct ccsr_pci { - uint cfg_addr; /* 0x.000 - PCI Configuration Address Register */ - uint cfg_data; /* 0x.004 - PCI Configuration Data Register */ - uint int_ack; /* 0x.008 - PCI Interrupt Acknowledge Register */ - char res1[3060]; - uint potar0; /* 0x.c00 - PCI Outbound Transaction Address Register 0 */ - uint potear0; /* 0x.c04 - PCI Outbound Translation Extended Address Register 0 */ - uint powbar0; /* 0x.c08 - PCI Outbound Window Base Address Register 0 */ - char res2[4]; - uint powar0; /* 0x.c10 - PCI Outbound Window Attributes Register 0 */ - char res3[12]; - uint potar1; /* 0x.c20 - PCI Outbound Transaction Address Register 1 */ - uint potear1; /* 0x.c24 - PCI Outbound Translation Extended Address Register 1 */ - uint powbar1; /* 0x.c28 - PCI Outbound Window Base Address Register 1 */ - char res4[4]; - uint powar1; /* 0x.c30 - PCI Outbound Window Attributes Register 1 */ - char res5[12]; - uint potar2; /* 0x.c40 - PCI Outbound Transaction Address Register 2 */ - uint potear2; /* 0x.c44 - PCI Outbound Translation Extended Address Register 2 */ - uint powbar2; /* 0x.c48 - PCI Outbound Window Base Address Register 2 */ - char res6[4]; - uint powar2; /* 0x.c50 - PCI Outbound Window Attributes Register 2 */ - char res7[12]; - uint potar3; /* 0x.c60 - PCI Outbound Transaction Address Register 3 */ - uint potear3; /* 0x.c64 - PCI Outbound Translation Extended Address Register 3 */ - uint powbar3; /* 0x.c68 - PCI Outbound Window Base Address Register 3 */ - char res8[4]; - uint powar3; /* 0x.c70 - PCI Outbound Window Attributes Register 3 */ - char res9[12]; - uint potar4; /* 0x.c80 - PCI Outbound Transaction Address Register 4 */ - uint potear4; /* 0x.c84 - PCI Outbound Translation Extended Address Register 4 */ - uint powbar4; /* 0x.c88 - PCI Outbound Window Base Address Register 4 */ - char res10[4]; - uint powar4; /* 0x.c90 - PCI Outbound Window Attributes Register 4 */ - char res11[268]; - uint pitar3; /* 0x.da0 - PCI Inbound Translation Address Register 3 */ - char res12[4]; - uint piwbar3; /* 0x.da8 - PCI Inbound Window Base Address Register 3 */ - uint piwbear3; /* 0x.dac - PCI Inbound Window Base Extended Address Register 3 */ - uint piwar3; /* 0x.db0 - PCI Inbound Window Attributes Register 3 */ - char res13[12]; - uint pitar2; /* 0x.dc0 - PCI Inbound Translation Address Register 2 */ - char res14[4]; - uint piwbar2; /* 0x.dc8 - PCI Inbound Window Base Address Register 2 */ - uint piwbear2; /* 0x.dcc - PCI Inbound Window Base Extended Address Register 2 */ - uint piwar2; /* 0x.dd0 - PCI Inbound Window Attributes Register 2 */ - char res15[12]; - uint pitar1; /* 0x.de0 - PCI Inbound Translation Address Register 1 */ - char res16[4]; - uint piwbar1; /* 0x.de8 - PCI Inbound Window Base Address Register 1 */ - char res17[4]; - uint piwar1; /* 0x.df0 - PCI Inbound Window Attributes Register 1 */ - char res18[12]; - uint err_dr; /* 0x.e00 - PCI Error Detect Register */ - uint err_cap_dr; /* 0x.e04 - PCI Error Capture Disable Register */ - uint err_en; /* 0x.e08 - PCI Error Enable Register */ - uint err_attrib; /* 0x.e0c - PCI Error Attributes Capture Register */ - uint err_addr; /* 0x.e10 - PCI Error Address Capture Register */ - uint err_ext_addr; /* 0x.e14 - PCI Error Extended Address Capture Register */ - uint err_dl; /* 0x.e18 - PCI Error Data Low Capture Register */ - uint err_dh; /* 0x.e1c - PCI Error Data High Capture Register */ - uint gas_timr; /* 0x.e20 - PCI Gasket Timer Register */ - uint pci_timr; /* 0x.e24 - PCI Timer Register */ - char res19[472]; -} ccsr_pci_t; +#define CCSR_GUTS_DMACR_DEV_SSI 0 /* DMA controller/channel set to SSI */ +#define CCSR_GUTS_DMACR_DEV_IR 1 /* DMA controller/channel set to IR */ -/* Global Utility Registers */ -typedef struct ccsr_guts { - uint porpllsr; /* 0x.0000 - POR PLL Ratio Status Register */ - uint porbmsr; /* 0x.0004 - POR Boot Mode Status Register */ - uint porimpscr; /* 0x.0008 - POR I/O Impedance Status and Control Register */ - uint pordevsr; /* 0x.000c - POR I/O Device Status Register */ - uint pordbgmsr; /* 0x.0010 - POR Debug Mode Status Register */ - char res1[12]; - uint gpporcr; /* 0x.0020 - General-Purpose POR Configuration Register */ - char res2[12]; - uint gpiocr; /* 0x.0030 - GPIO Control Register */ - char res3[12]; - uint gpoutdr; /* 0x.0040 - General-Purpose Output Data Register */ - char res4[12]; - uint gpindr; /* 0x.0050 - General-Purpose Input Data Register */ - char res5[12]; - uint pmuxcr; /* 0x.0060 - Alternate Function Signal Multiplex Control */ - char res6[12]; - uint devdisr; /* 0x.0070 - Device Disable Control */ - char res7[12]; - uint powmgtcsr; /* 0x.0080 - Power Management Status and Control Register */ - char res8[12]; - uint mcpsumr; /* 0x.0090 - Machine Check Summary Register */ - char res9[12]; - uint pvr; /* 0x.00a0 - Processor Version Register */ - uint svr; /* 0x.00a4 - System Version Register */ - char res10[3416]; - uint clkocr; /* 0x.0e00 - Clock Out Select Register */ - char res11[12]; - uint ddrdllcr; /* 0x.0e10 - DDR DLL Control Register */ - char res12[12]; - uint lbcdllcr; /* 0x.0e20 - LBC DLL Control Register */ - char res13[61916]; -} ccsr_guts_t; +/* + * Set the DMACR register in the GUTS + * + * The DMACR register determines the source of initiated transfers for each + * channel on each DMA controller. Rather than have a bunch of repetitive + * macros for the bit patterns, we just have a function that calculates + * them. + * + * guts: Pointer to GUTS structure + * co: The DMA controller (1 or 2) + * ch: The channel on the DMA controller (0, 1, 2, or 3) + * device: The device to set as the source (CCSR_GUTS_DMACR_DEV_xx) + */ +static inline void guts_set_dmacr(struct ccsr_guts __iomem *guts, + unsigned int co, unsigned int ch, unsigned int device) +{ + unsigned int shift = 16 + (8 * (2 - co) + 2 * (3 - ch)); + + clrsetbits_be32(&guts->dmacr, 3 << shift, device << shift); +} + +#define CCSR_GUTS_PMUXCR_LDPSEL 0x00010000 +#define CCSR_GUTS_PMUXCR_SSI1_MASK 0x0000C000 /* Bitmask for SSI1 */ +#define CCSR_GUTS_PMUXCR_SSI1_LA 0x00000000 /* Latched address */ +#define CCSR_GUTS_PMUXCR_SSI1_HI 0x00004000 /* High impedance */ +#define CCSR_GUTS_PMUXCR_SSI1_SSI 0x00008000 /* Used for SSI1 */ +#define CCSR_GUTS_PMUXCR_SSI2_MASK 0x00003000 /* Bitmask for SSI2 */ +#define CCSR_GUTS_PMUXCR_SSI2_LA 0x00000000 /* Latched address */ +#define CCSR_GUTS_PMUXCR_SSI2_HI 0x00001000 /* High impedance */ +#define CCSR_GUTS_PMUXCR_SSI2_SSI 0x00002000 /* Used for SSI2 */ +#define CCSR_GUTS_PMUXCR_LA_22_25_LA 0x00000000 /* Latched Address */ +#define CCSR_GUTS_PMUXCR_LA_22_25_HI 0x00000400 /* High impedance */ +#define CCSR_GUTS_PMUXCR_DBGDRV 0x00000200 /* Signals not driven */ +#define CCSR_GUTS_PMUXCR_DMA2_0 0x00000008 +#define CCSR_GUTS_PMUXCR_DMA2_3 0x00000004 +#define CCSR_GUTS_PMUXCR_DMA1_0 0x00000002 +#define CCSR_GUTS_PMUXCR_DMA1_3 0x00000001 + +#define CCSR_GUTS_CLKDVDR_PXCKEN 0x80000000 +#define CCSR_GUTS_CLKDVDR_SSICKEN 0x20000000 +#define CCSR_GUTS_CLKDVDR_PXCKINV 0x10000000 +#define CCSR_GUTS_CLKDVDR_PXCKDLY_SHIFT 25 +#define CCSR_GUTS_CLKDVDR_PXCKDLY_MASK 0x06000000 +#define CCSR_GUTS_CLKDVDR_PXCKDLY(x) \ + (((x) & 3) << CCSR_GUTS_CLKDVDR_PXCKDLY_SHIFT) +#define CCSR_GUTS_CLKDVDR_PXCLK_SHIFT 16 +#define CCSR_GUTS_CLKDVDR_PXCLK_MASK 0x001F0000 +#define CCSR_GUTS_CLKDVDR_PXCLK(x) (((x) & 31) << CCSR_GUTS_CLKDVDR_PXCLK_SHIFT) +#define CCSR_GUTS_CLKDVDR_SSICLK_MASK 0x000000FF +#define CCSR_GUTS_CLKDVDR_SSICLK(x) ((x) & CCSR_GUTS_CLKDVDR_SSICLK_MASK) #endif /* __ASM_POWERPC_IMMAP_86XX_H__ */ #endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/immap_cpm2.h b/include/asm-powerpc/immap_cpm2.h new file mode 100644 index 00000000000..4080bab0468 --- /dev/null +++ b/include/asm-powerpc/immap_cpm2.h @@ -0,0 +1,650 @@ +/* + * CPM2 Internal Memory Map + * Copyright (c) 1999 Dan Malek (dmalek@jlc.net) + * + * The Internal Memory Map for devices with CPM2 on them. This + * is the superset of all CPM2 devices (8260, 8266, 8280, 8272, + * 8560). + */ +#ifdef __KERNEL__ +#ifndef __IMMAP_CPM2__ +#define __IMMAP_CPM2__ + +#include <linux/types.h> + +/* System configuration registers. +*/ +typedef struct sys_82xx_conf { + u32 sc_siumcr; + u32 sc_sypcr; + u8 res1[6]; + u16 sc_swsr; + u8 res2[20]; + u32 sc_bcr; + u8 sc_ppc_acr; + u8 res3[3]; + u32 sc_ppc_alrh; + u32 sc_ppc_alrl; + u8 sc_lcl_acr; + u8 res4[3]; + u32 sc_lcl_alrh; + u32 sc_lcl_alrl; + u32 sc_tescr1; + u32 sc_tescr2; + u32 sc_ltescr1; + u32 sc_ltescr2; + u32 sc_pdtea; + u8 sc_pdtem; + u8 res5[3]; + u32 sc_ldtea; + u8 sc_ldtem; + u8 res6[163]; +} sysconf_82xx_cpm2_t; + +typedef struct sys_85xx_conf { + u32 sc_cear; + u16 sc_ceer; + u16 sc_cemr; + u8 res1[70]; + u32 sc_smaer; + u8 res2[4]; + u32 sc_smevr; + u32 sc_smctr; + u32 sc_lmaer; + u8 res3[4]; + u32 sc_lmevr; + u32 sc_lmctr; + u8 res4[144]; +} sysconf_85xx_cpm2_t; + +typedef union sys_conf { + sysconf_82xx_cpm2_t siu_82xx; + sysconf_85xx_cpm2_t siu_85xx; +} sysconf_cpm2_t; + + + +/* Memory controller registers. +*/ +typedef struct mem_ctlr { + u32 memc_br0; + u32 memc_or0; + u32 memc_br1; + u32 memc_or1; + u32 memc_br2; + u32 memc_or2; + u32 memc_br3; + u32 memc_or3; + u32 memc_br4; + u32 memc_or4; + u32 memc_br5; + u32 memc_or5; + u32 memc_br6; + u32 memc_or6; + u32 memc_br7; + u32 memc_or7; + u32 memc_br8; + u32 memc_or8; + u32 memc_br9; + u32 memc_or9; + u32 memc_br10; + u32 memc_or10; + u32 memc_br11; + u32 memc_or11; + u8 res1[8]; + u32 memc_mar; + u8 res2[4]; + u32 memc_mamr; + u32 memc_mbmr; + u32 memc_mcmr; + u8 res3[8]; + u16 memc_mptpr; + u8 res4[2]; + u32 memc_mdr; + u8 res5[4]; + u32 memc_psdmr; + u32 memc_lsdmr; + u8 memc_purt; + u8 res6[3]; + u8 memc_psrt; + u8 res7[3]; + u8 memc_lurt; + u8 res8[3]; + u8 memc_lsrt; + u8 res9[3]; + u32 memc_immr; + u32 memc_pcibr0; + u32 memc_pcibr1; + u8 res10[16]; + u32 memc_pcimsk0; + u32 memc_pcimsk1; + u8 res11[52]; +} memctl_cpm2_t; + +/* System Integration Timers. +*/ +typedef struct sys_int_timers { + u8 res1[32]; + u16 sit_tmcntsc; + u8 res2[2]; + u32 sit_tmcnt; + u8 res3[4]; + u32 sit_tmcntal; + u8 res4[16]; + u16 sit_piscr; + u8 res5[2]; + u32 sit_pitc; + u32 sit_pitr; + u8 res6[94]; + u8 res7[390]; +} sit_cpm2_t; + +#define PISCR_PIRQ_MASK ((u16)0xff00) +#define PISCR_PS ((u16)0x0080) +#define PISCR_PIE ((u16)0x0004) +#define PISCR_PTF ((u16)0x0002) +#define PISCR_PTE ((u16)0x0001) + +/* PCI Controller. +*/ +typedef struct pci_ctlr { + u32 pci_omisr; + u32 pci_omimr; + u8 res1[8]; + u32 pci_ifqpr; + u32 pci_ofqpr; + u8 res2[8]; + u32 pci_imr0; + u32 pci_imr1; + u32 pci_omr0; + u32 pci_omr1; + u32 pci_odr; + u8 res3[4]; + u32 pci_idr; + u8 res4[20]; + u32 pci_imisr; + u32 pci_imimr; + u8 res5[24]; + u32 pci_ifhpr; + u8 res6[4]; + u32 pci_iftpr; + u8 res7[4]; + u32 pci_iphpr; + u8 res8[4]; + u32 pci_iptpr; + u8 res9[4]; + u32 pci_ofhpr; + u8 res10[4]; + u32 pci_oftpr; + u8 res11[4]; + u32 pci_ophpr; + u8 res12[4]; + u32 pci_optpr; + u8 res13[8]; + u32 pci_mucr; + u8 res14[8]; + u32 pci_qbar; + u8 res15[12]; + u32 pci_dmamr0; + u32 pci_dmasr0; + u32 pci_dmacdar0; + u8 res16[4]; + u32 pci_dmasar0; + u8 res17[4]; + u32 pci_dmadar0; + u8 res18[4]; + u32 pci_dmabcr0; + u32 pci_dmandar0; + u8 res19[86]; + u32 pci_dmamr1; + u32 pci_dmasr1; + u32 pci_dmacdar1; + u8 res20[4]; + u32 pci_dmasar1; + u8 res21[4]; + u32 pci_dmadar1; + u8 res22[4]; + u32 pci_dmabcr1; + u32 pci_dmandar1; + u8 res23[88]; + u32 pci_dmamr2; + u32 pci_dmasr2; + u32 pci_dmacdar2; + u8 res24[4]; + u32 pci_dmasar2; + u8 res25[4]; + u32 pci_dmadar2; + u8 res26[4]; + u32 pci_dmabcr2; + u32 pci_dmandar2; + u8 res27[88]; + u32 pci_dmamr3; + u32 pci_dmasr3; + u32 pci_dmacdar3; + u8 res28[4]; + u32 pci_dmasar3; + u8 res29[4]; + u32 pci_dmadar3; + u8 res30[4]; + u32 pci_dmabcr3; + u32 pci_dmandar3; + u8 res31[344]; + u32 pci_potar0; + u8 res32[4]; + u32 pci_pobar0; + u8 res33[4]; + u32 pci_pocmr0; + u8 res34[4]; + u32 pci_potar1; + u8 res35[4]; + u32 pci_pobar1; + u8 res36[4]; + u32 pci_pocmr1; + u8 res37[4]; + u32 pci_potar2; + u8 res38[4]; + u32 pci_pobar2; + u8 res39[4]; + u32 pci_pocmr2; + u8 res40[50]; + u32 pci_ptcr; + u32 pci_gpcr; + u32 pci_gcr; + u32 pci_esr; + u32 pci_emr; + u32 pci_ecr; + u32 pci_eacr; + u8 res41[4]; + u32 pci_edcr; + u8 res42[4]; + u32 pci_eccr; + u8 res43[44]; + u32 pci_pitar1; + u8 res44[4]; + u32 pci_pibar1; + u8 res45[4]; + u32 pci_picmr1; + u8 res46[4]; + u32 pci_pitar0; + u8 res47[4]; + u32 pci_pibar0; + u8 res48[4]; + u32 pci_picmr0; + u8 res49[4]; + u32 pci_cfg_addr; + u32 pci_cfg_data; + u32 pci_int_ack; + u8 res50[756]; +} pci_cpm2_t; + +/* Interrupt Controller. +*/ +typedef struct interrupt_controller { + u16 ic_sicr; + u8 res1[2]; + u32 ic_sivec; + u32 ic_sipnrh; + u32 ic_sipnrl; + u32 ic_siprr; + u32 ic_scprrh; + u32 ic_scprrl; + u32 ic_simrh; + u32 ic_simrl; + u32 ic_siexr; + u8 res2[88]; +} intctl_cpm2_t; + +/* Clocks and Reset. +*/ +typedef struct clk_and_reset { + u32 car_sccr; + u8 res1[4]; + u32 car_scmr; + u8 res2[4]; + u32 car_rsr; + u32 car_rmr; + u8 res[104]; +} car_cpm2_t; + +/* Input/Output Port control/status registers. + * Names consistent with processor manual, although they are different + * from the original 8xx names....... + */ +typedef struct io_port { + u32 iop_pdira; + u32 iop_ppara; + u32 iop_psora; + u32 iop_podra; + u32 iop_pdata; + u8 res1[12]; + u32 iop_pdirb; + u32 iop_pparb; + u32 iop_psorb; + u32 iop_podrb; + u32 iop_pdatb; + u8 res2[12]; + u32 iop_pdirc; + u32 iop_pparc; + u32 iop_psorc; + u32 iop_podrc; + u32 iop_pdatc; + u8 res3[12]; + u32 iop_pdird; + u32 iop_ppard; + u32 iop_psord; + u32 iop_podrd; + u32 iop_pdatd; + u8 res4[12]; +} iop_cpm2_t; + +/* Communication Processor Module Timers +*/ +typedef struct cpm_timers { + u8 cpmt_tgcr1; + u8 res1[3]; + u8 cpmt_tgcr2; + u8 res2[11]; + u16 cpmt_tmr1; + u16 cpmt_tmr2; + u16 cpmt_trr1; + u16 cpmt_trr2; + u16 cpmt_tcr1; + u16 cpmt_tcr2; + u16 cpmt_tcn1; + u16 cpmt_tcn2; + u16 cpmt_tmr3; + u16 cpmt_tmr4; + u16 cpmt_trr3; + u16 cpmt_trr4; + u16 cpmt_tcr3; + u16 cpmt_tcr4; + u16 cpmt_tcn3; + u16 cpmt_tcn4; + u16 cpmt_ter1; + u16 cpmt_ter2; + u16 cpmt_ter3; + u16 cpmt_ter4; + u8 res3[584]; +} cpmtimer_cpm2_t; + +/* DMA control/status registers. +*/ +typedef struct sdma_csr { + u8 res0[24]; + u8 sdma_sdsr; + u8 res1[3]; + u8 sdma_sdmr; + u8 res2[3]; + u8 sdma_idsr1; + u8 res3[3]; + u8 sdma_idmr1; + u8 res4[3]; + u8 sdma_idsr2; + u8 res5[3]; + u8 sdma_idmr2; + u8 res6[3]; + u8 sdma_idsr3; + u8 res7[3]; + u8 sdma_idmr3; + u8 res8[3]; + u8 sdma_idsr4; + u8 res9[3]; + u8 sdma_idmr4; + u8 res10[707]; +} sdma_cpm2_t; + +/* Fast controllers +*/ +typedef struct fcc { + u32 fcc_gfmr; + u32 fcc_fpsmr; + u16 fcc_ftodr; + u8 res1[2]; + u16 fcc_fdsr; + u8 res2[2]; + u16 fcc_fcce; + u8 res3[2]; + u16 fcc_fccm; + u8 res4[2]; + u8 fcc_fccs; + u8 res5[3]; + u8 fcc_ftirr_phy[4]; +} fcc_t; + +/* Fast controllers continued + */ +typedef struct fcc_c { + u32 fcc_firper; + u32 fcc_firer; + u32 fcc_firsr_hi; + u32 fcc_firsr_lo; + u8 fcc_gfemr; + u8 res1[15]; +} fcc_c_t; + +/* TC Layer + */ +typedef struct tclayer { + u16 tc_tcmode; + u16 tc_cdsmr; + u16 tc_tcer; + u16 tc_rcc; + u16 tc_tcmr; + u16 tc_fcc; + u16 tc_ccc; + u16 tc_icc; + u16 tc_tcc; + u16 tc_ecc; + u8 res1[12]; +} tclayer_t; + + +/* I2C +*/ +typedef struct i2c { + u8 i2c_i2mod; + u8 res1[3]; + u8 i2c_i2add; + u8 res2[3]; + u8 i2c_i2brg; + u8 res3[3]; + u8 i2c_i2com; + u8 res4[3]; + u8 i2c_i2cer; + u8 res5[3]; + u8 i2c_i2cmr; + u8 res6[331]; +} i2c_cpm2_t; + +typedef struct scc { /* Serial communication channels */ + u32 scc_gsmrl; + u32 scc_gsmrh; + u16 scc_psmr; + u8 res1[2]; + u16 scc_todr; + u16 scc_dsr; + u16 scc_scce; + u8 res2[2]; + u16 scc_sccm; + u8 res3; + u8 scc_sccs; + u8 res4[8]; +} scc_t; + +typedef struct smc { /* Serial management channels */ + u8 res1[2]; + u16 smc_smcmr; + u8 res2[2]; + u8 smc_smce; + u8 res3[3]; + u8 smc_smcm; + u8 res4[5]; +} smc_t; + +/* Serial Peripheral Interface. +*/ +typedef struct spi_ctrl { + u16 spi_spmode; + u8 res1[4]; + u8 spi_spie; + u8 res2[3]; + u8 spi_spim; + u8 res3[2]; + u8 spi_spcom; + u8 res4[82]; +} spictl_cpm2_t; + +/* CPM Mux. +*/ +typedef struct cpmux { + u8 cmx_si1cr; + u8 res1; + u8 cmx_si2cr; + u8 res2; + u32 cmx_fcr; + u32 cmx_scr; + u8 cmx_smr; + u8 res3; + u16 cmx_uar; + u8 res4[16]; +} cpmux_t; + +/* SIRAM control +*/ +typedef struct siram { + u16 si_amr; + u16 si_bmr; + u16 si_cmr; + u16 si_dmr; + u8 si_gmr; + u8 res1; + u8 si_cmdr; + u8 res2; + u8 si_str; + u8 res3; + u16 si_rsr; +} siramctl_t; + +typedef struct mcc { + u16 mcc_mcce; + u8 res1[2]; + u16 mcc_mccm; + u8 res2[2]; + u8 mcc_mccf; + u8 res3[7]; +} mcc_t; + +typedef struct comm_proc { + u32 cp_cpcr; + u32 cp_rccr; + u8 res1[14]; + u16 cp_rter; + u8 res2[2]; + u16 cp_rtmr; + u16 cp_rtscr; + u8 res3[2]; + u32 cp_rtsr; + u8 res4[12]; +} cpm_cpm2_t; + +/* USB Controller. +*/ +typedef struct usb_ctlr { + u8 usb_usmod; + u8 usb_usadr; + u8 usb_uscom; + u8 res1[1]; + u16 usb_usep1; + u16 usb_usep2; + u16 usb_usep3; + u16 usb_usep4; + u8 res2[4]; + u16 usb_usber; + u8 res3[2]; + u16 usb_usbmr; + u8 usb_usbs; + u8 res4[7]; +} usb_cpm2_t; + +/* ...and the whole thing wrapped up.... +*/ + +typedef struct immap { + /* Some references are into the unique and known dpram spaces, + * others are from the generic base. + */ +#define im_dprambase im_dpram1 + u8 im_dpram1[16*1024]; + u8 res1[16*1024]; + u8 im_dpram2[4*1024]; + u8 res2[8*1024]; + u8 im_dpram3[4*1024]; + u8 res3[16*1024]; + + sysconf_cpm2_t im_siu_conf; /* SIU Configuration */ + memctl_cpm2_t im_memctl; /* Memory Controller */ + sit_cpm2_t im_sit; /* System Integration Timers */ + pci_cpm2_t im_pci; /* PCI Controller */ + intctl_cpm2_t im_intctl; /* Interrupt Controller */ + car_cpm2_t im_clkrst; /* Clocks and reset */ + iop_cpm2_t im_ioport; /* IO Port control/status */ + cpmtimer_cpm2_t im_cpmtimer; /* CPM timers */ + sdma_cpm2_t im_sdma; /* SDMA control/status */ + + fcc_t im_fcc[3]; /* Three FCCs */ + u8 res4z[32]; + fcc_c_t im_fcc_c[3]; /* Continued FCCs */ + + u8 res4[32]; + + tclayer_t im_tclayer[8]; /* Eight TCLayers */ + u16 tc_tcgsr; + u16 tc_tcger; + + /* First set of baud rate generators. + */ + u8 res[236]; + u32 im_brgc5; + u32 im_brgc6; + u32 im_brgc7; + u32 im_brgc8; + + u8 res5[608]; + + i2c_cpm2_t im_i2c; /* I2C control/status */ + cpm_cpm2_t im_cpm; /* Communication processor */ + + /* Second set of baud rate generators. + */ + u32 im_brgc1; + u32 im_brgc2; + u32 im_brgc3; + u32 im_brgc4; + + scc_t im_scc[4]; /* Four SCCs */ + smc_t im_smc[2]; /* Couple of SMCs */ + spictl_cpm2_t im_spi; /* A SPI */ + cpmux_t im_cpmux; /* CPM clock route mux */ + siramctl_t im_siramctl1; /* First SI RAM Control */ + mcc_t im_mcc1; /* First MCC */ + siramctl_t im_siramctl2; /* Second SI RAM Control */ + mcc_t im_mcc2; /* Second MCC */ + usb_cpm2_t im_usb; /* USB Controller */ + + u8 res6[1153]; + + u16 im_si1txram[256]; + u8 res7[512]; + u16 im_si1rxram[256]; + u8 res8[512]; + u16 im_si2txram[256]; + u8 res9[512]; + u16 im_si2rxram[256]; + u8 res10[512]; + u8 res11[4096]; +} cpm2_map_t; + +extern cpm2_map_t __iomem *cpm2_immr; + +#endif /* __IMMAP_CPM2__ */ +#endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/immap_qe.h b/include/asm-powerpc/immap_qe.h index 1020b7fc012..aba9806b31c 100644 --- a/include/asm-powerpc/immap_qe.h +++ b/include/asm-powerpc/immap_qe.h @@ -86,8 +86,9 @@ struct cp_qe { __be16 ceexe4; /* QE external request 4 event register */ u8 res11[0x2]; __be16 ceexm4; /* QE external request 4 mask register */ - u8 res12[0x2]; - u8 res13[0x280]; + u8 res12[0x3A]; + __be32 ceurnr; /* QE microcode revision number register */ + u8 res13[0x244]; } __attribute__ ((packed)); /* QE Multiplexer */ @@ -96,10 +97,7 @@ struct qe_mux { __be32 cmxsi1cr_l; /* CMX SI1 clock route low register */ __be32 cmxsi1cr_h; /* CMX SI1 clock route high register */ __be32 cmxsi1syr; /* CMX SI1 SYNC route register */ - __be32 cmxucr1; /* CMX UCC1, UCC3 clock route register */ - __be32 cmxucr2; /* CMX UCC5, UCC7 clock route register */ - __be32 cmxucr3; /* CMX UCC2, UCC4 clock route register */ - __be32 cmxucr4; /* CMX UCC6, UCC8 clock route register */ + __be32 cmxucr[4]; /* CMX UCCx clock route registers */ __be32 cmxupcr; /* CMX UPC clock route register */ u8 res0[0x1C]; } __attribute__ ((packed)); @@ -260,7 +258,6 @@ struct ucc_slow { __be16 utpt; u8 res4[0x52]; u8 guemr; /* UCC general extended mode register */ - u8 res5[0x200 - 0x091]; } __attribute__ ((packed)); /* QE UCC Fast */ @@ -293,21 +290,13 @@ struct ucc_fast { __be32 urtry; /* UCC retry counter register */ u8 res8[0x4C]; u8 guemr; /* UCC general extended mode register */ - u8 res9[0x100 - 0x091]; -} __attribute__ ((packed)); - -/* QE UCC */ -struct ucc_common { - u8 res1[0x90]; - u8 guemr; - u8 res2[0x200 - 0x091]; } __attribute__ ((packed)); struct ucc { union { struct ucc_slow slow; struct ucc_fast fast; - struct ucc_common common; + u8 res[0x200]; /* UCC blocks are 512 bytes each */ }; } __attribute__ ((packed)); @@ -406,7 +395,7 @@ struct dbg { /* RISC Special Registers (Trap and Breakpoint) */ struct rsp { - u8 fixme[0x100]; + u32 reg[0x40]; /* 64 32-bit registers */ } __attribute__ ((packed)); struct qe_immap { @@ -435,11 +424,13 @@ struct qe_immap { u8 res13[0x600]; struct upc upc2; /* MultiPHY UTOPIA POS Ctrlr 2*/ struct sdma sdma; /* SDMA */ - struct dbg dbg; /* Debug Space */ - struct rsp rsp[0x2]; /* RISC Special Registers + struct dbg dbg; /* 0x104080 - 0x1040FF + Debug Space */ + struct rsp rsp[0x2]; /* 0x104100 - 0x1042FF + RISC Special Registers (Trap and Breakpoint) */ - u8 res14[0x300]; - u8 res15[0x3A00]; + u8 res14[0x300]; /* 0x104300 - 0x1045FF */ + u8 res15[0x3A00]; /* 0x104600 - 0x107FFF */ u8 res16[0x8000]; /* 0x108000 - 0x110000 */ u8 muram[0xC000]; /* 0x110000 - 0x11C000 Multi-user RAM */ @@ -450,7 +441,7 @@ struct qe_immap { extern struct qe_immap *qe_immr; extern phys_addr_t get_qe_base(void); -static inline unsigned long immrbar_virt_to_phys(volatile void * address) +static inline unsigned long immrbar_virt_to_phys(void *address) { if ( ((u32)address >= (u32)qe_immr) && ((u32)address < ((u32)qe_immr + QE_IMMAP_SIZE)) ) diff --git a/include/asm-powerpc/io.h b/include/asm-powerpc/io.h index bb8d965f96c..affba7052fb 100644 --- a/include/asm-powerpc/io.h +++ b/include/asm-powerpc/io.h @@ -86,7 +86,7 @@ extern unsigned long pci_dram_offset; */ #ifdef CONFIG_PPC64 -#define IO_SET_SYNC_FLAG() do { get_paca()->io_sync = 1; } while(0) +#define IO_SET_SYNC_FLAG() do { local_paca->io_sync = 1; } while(0) #else #define IO_SET_SYNC_FLAG() #endif @@ -734,6 +734,32 @@ static inline void * bus_to_virt(unsigned long address) #define setbits16(_addr, _v) out_be16((_addr), in_be16(_addr) | (_v)) #define clrbits16(_addr, _v) out_be16((_addr), in_be16(_addr) & ~(_v)) +#define setbits8(_addr, _v) out_8((_addr), in_8(_addr) | (_v)) +#define clrbits8(_addr, _v) out_8((_addr), in_8(_addr) & ~(_v)) + +/* Clear and set bits in one shot. These macros can be used to clear and + * set multiple bits in a register using a single read-modify-write. These + * macros can also be used to set a multiple-bit bit pattern using a mask, + * by specifying the mask in the 'clear' parameter and the new bit pattern + * in the 'set' parameter. + */ + +#define clrsetbits(type, addr, clear, set) \ + out_##type((addr), (in_##type(addr) & ~(clear)) | (set)) + +#ifdef __powerpc64__ +#define clrsetbits_be64(addr, clear, set) clrsetbits(be64, addr, clear, set) +#define clrsetbits_le64(addr, clear, set) clrsetbits(le64, addr, clear, set) +#endif + +#define clrsetbits_be32(addr, clear, set) clrsetbits(be32, addr, clear, set) +#define clrsetbits_le32(addr, clear, set) clrsetbits(le32, addr, clear, set) + +#define clrsetbits_be16(addr, clear, set) clrsetbits(be16, addr, clear, set) +#define clrsetbits_le16(addr, clear, set) clrsetbits(le32, addr, clear, set) + +#define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set) + #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_IO_H */ diff --git a/include/asm-powerpc/irq.h b/include/asm-powerpc/irq.h index 0485c53db2b..1392db45652 100644 --- a/include/asm-powerpc/irq.h +++ b/include/asm-powerpc/irq.h @@ -124,6 +124,9 @@ struct irq_host { struct irq_host_ops *ops; void *host_data; irq_hw_number_t inval_irq; + + /* Optional device node pointer */ + struct device_node *of_node; }; /* The main irq map itself is an array of NR_IRQ entries containing the @@ -142,7 +145,7 @@ extern irq_hw_number_t virq_to_hw(unsigned int virq); /** * irq_alloc_host - Allocate a new irq_host data structure - * @node: device-tree node of the interrupt controller + * @of_node: optional device-tree node of the interrupt controller * @revmap_type: type of reverse mapping to use * @revmap_arg: for IRQ_HOST_MAP_LINEAR linear only: size of the map * @ops: map/unmap host callbacks @@ -156,7 +159,8 @@ extern irq_hw_number_t virq_to_hw(unsigned int virq); * later during boot automatically (the reverse mapping will use the slow path * until that happens). */ -extern struct irq_host *irq_alloc_host(unsigned int revmap_type, +extern struct irq_host *irq_alloc_host(struct device_node *of_node, + unsigned int revmap_type, unsigned int revmap_arg, struct irq_host_ops *ops, irq_hw_number_t inval_irq); diff --git a/include/asm-powerpc/iseries/hv_call_event.h b/include/asm-powerpc/iseries/hv_call_event.h index 4cec4762076..cc029d388e1 100644 --- a/include/asm-powerpc/iseries/hv_call_event.h +++ b/include/asm-powerpc/iseries/hv_call_event.h @@ -21,6 +21,9 @@ #ifndef _ASM_POWERPC_ISERIES_HV_CALL_EVENT_H #define _ASM_POWERPC_ISERIES_HV_CALL_EVENT_H +#include <linux/types.h> +#include <linux/dma-mapping.h> + #include <asm/iseries/hv_call_sc.h> #include <asm/iseries/hv_types.h> #include <asm/abs_addr.h> @@ -113,6 +116,13 @@ static inline HvLpEvent_Rc HvCallEvent_signalLpEventFast(HvLpIndex targetLp, eventData3, eventData4, eventData5); } +extern void *iseries_hv_alloc(size_t size, dma_addr_t *dma_handle, gfp_t flag); +extern void iseries_hv_free(size_t size, void *vaddr, dma_addr_t dma_handle); +extern dma_addr_t iseries_hv_map(void *vaddr, size_t size, + enum dma_data_direction direction); +extern void iseries_hv_unmap(dma_addr_t dma_handle, size_t size, + enum dma_data_direction direction); + static inline HvLpEvent_Rc HvCallEvent_ackLpEvent(struct HvLpEvent *event) { return HvCall1(HvCallEventAckLpEvent, virt_to_abs(event)); diff --git a/include/asm-powerpc/iseries/iommu.h b/include/asm-powerpc/iseries/iommu.h index 6e323a13ac3..c59ee7e4bed 100644 --- a/include/asm-powerpc/iseries/iommu.h +++ b/include/asm-powerpc/iseries/iommu.h @@ -22,6 +22,7 @@ */ struct pci_dev; +struct vio_dev; struct device_node; struct iommu_table; @@ -34,4 +35,7 @@ extern void iommu_table_getparms_iSeries(unsigned long busno, unsigned char slotno, unsigned char virtbus, struct iommu_table *tbl); +extern struct iommu_table *vio_build_iommu_table_iseries(struct vio_dev *dev); +extern void iommu_vio_init(void); + #endif /* _ASM_POWERPC_ISERIES_IOMMU_H */ diff --git a/include/asm-powerpc/iseries/lpar_map.h b/include/asm-powerpc/iseries/lpar_map.h index 2ec384d66ab..5e9f3e128ee 100644 --- a/include/asm-powerpc/iseries/lpar_map.h +++ b/include/asm-powerpc/iseries/lpar_map.h @@ -22,6 +22,8 @@ #include <asm/types.h> +#endif + /* * The iSeries hypervisor will set up mapping for one or more * ESID/VSID pairs (in SLB/segment registers) and will set up @@ -56,6 +58,7 @@ /* Hypervisor initially maps 32MB of the load area */ #define HvPagesToMap 8192 +#ifndef __ASSEMBLY__ struct LparMap { u64 xNumberEsids; // Number of ESID/VSID pairs u64 xNumberRanges; // Number of VA ranges to map diff --git a/include/asm-powerpc/iseries/vio.h b/include/asm-powerpc/iseries/vio.h index 7a95d296abd..f9ac0d00b95 100644 --- a/include/asm-powerpc/iseries/vio.h +++ b/include/asm-powerpc/iseries/vio.h @@ -51,6 +51,116 @@ */ #define VIO_MAX_SUBTYPES 8 +#define VIOMAXBLOCKDMA 12 + +struct open_data { + u64 disk_size; + u16 max_disk; + u16 cylinders; + u16 tracks; + u16 sectors; + u16 bytes_per_sector; +}; + +struct rw_data { + u64 offset; + struct { + u32 token; + u32 reserved; + u64 len; + } dma_info[VIOMAXBLOCKDMA]; +}; + +struct vioblocklpevent { + struct HvLpEvent event; + u32 reserved; + u16 version; + u16 sub_result; + u16 disk; + u16 flags; + union { + struct open_data open_data; + struct rw_data rw_data; + u64 changed; + } u; +}; + +#define vioblockflags_ro 0x0001 + +enum vioblocksubtype { + vioblockopen = 0x0001, + vioblockclose = 0x0002, + vioblockread = 0x0003, + vioblockwrite = 0x0004, + vioblockflush = 0x0005, + vioblockcheck = 0x0007 +}; + +struct viocdlpevent { + struct HvLpEvent event; + u32 reserved; + u16 version; + u16 sub_result; + u16 disk; + u16 flags; + u32 token; + u64 offset; /* On open, max number of disks */ + u64 len; /* On open, size of the disk */ + u32 block_size; /* Only set on open */ + u32 media_size; /* Only set on open */ +}; + +enum viocdsubtype { + viocdopen = 0x0001, + viocdclose = 0x0002, + viocdread = 0x0003, + viocdwrite = 0x0004, + viocdlockdoor = 0x0005, + viocdgetinfo = 0x0006, + viocdcheck = 0x0007 +}; + +struct viotapelpevent { + struct HvLpEvent event; + u32 reserved; + u16 version; + u16 sub_type_result; + u16 tape; + u16 flags; + u32 token; + u64 len; + union { + struct { + u32 tape_op; + u32 count; + } op; + struct { + u32 type; + u32 resid; + u32 dsreg; + u32 gstat; + u32 erreg; + u32 file_no; + u32 block_no; + } get_status; + struct { + u32 block_no; + } get_pos; + } u; +}; + +enum viotapesubtype { + viotapeopen = 0x0001, + viotapeclose = 0x0002, + viotaperead = 0x0003, + viotapewrite = 0x0004, + viotapegetinfo = 0x0005, + viotapeop = 0x0006, + viotapegetpos = 0x0007, + viotapesetpos = 0x0008, + viotapegetstatus = 0x0009 +}; + /* * Each subtype can register a handler to process their events. * The handler must have this interface. @@ -68,6 +178,8 @@ extern void vio_set_hostlp(void); extern void *vio_get_event_buffer(int subtype); extern void vio_free_event_buffer(int subtype, void *buffer); +extern struct vio_dev *vio_create_viodasd(u32 unit); + extern HvLpIndex viopath_hostLp; extern HvLpIndex viopath_ourLp; @@ -150,8 +262,4 @@ enum viochar_rc { viochar_rc_ebusy = 1 }; -struct device; - -extern struct device *iSeries_vio_dev; - #endif /* _ASM_POWERPC_ISERIES_VIO_H */ diff --git a/include/asm-powerpc/kgdb.h b/include/asm-powerpc/kgdb.h new file mode 100644 index 00000000000..b617dac8296 --- /dev/null +++ b/include/asm-powerpc/kgdb.h @@ -0,0 +1,57 @@ +/* + * kgdb.h: Defines and declarations for serial line source level + * remote debugging of the Linux kernel using gdb. + * + * PPC Mods (C) 1998 Michael Tesch (tesch@cs.wisc.edu) + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ +#ifdef __KERNEL__ +#ifndef _PPC_KGDB_H +#define _PPC_KGDB_H + +#ifndef __ASSEMBLY__ + +/* Things specific to the gen550 backend. */ +struct uart_port; + +extern void gen550_progress(char *, unsigned short); +extern void gen550_kgdb_map_scc(void); +extern void gen550_init(int, struct uart_port *); + +/* Things specific to the pmac backend. */ +extern void zs_kgdb_hook(int tty_num); + +/* To init the kgdb engine. (called by serial hook)*/ +extern void set_debug_traps(void); + +/* To enter the debugger explicitly. */ +extern void breakpoint(void); + +/* For taking exceptions + * these are defined in traps.c + */ +extern int (*debugger)(struct pt_regs *regs); +extern int (*debugger_bpt)(struct pt_regs *regs); +extern int (*debugger_sstep)(struct pt_regs *regs); +extern int (*debugger_iabr_match)(struct pt_regs *regs); +extern int (*debugger_dabr_match)(struct pt_regs *regs); +extern void (*debugger_fault_handler)(struct pt_regs *regs); + +/* What we bring to the party */ +int kgdb_bpt(struct pt_regs *regs); +int kgdb_sstep(struct pt_regs *regs); +void kgdb(struct pt_regs *regs); +int kgdb_iabr_match(struct pt_regs *regs); +int kgdb_dabr_match(struct pt_regs *regs); + +/* + * external low-level support routines (ie macserial.c) + */ +extern void kgdb_interruptible(int); /* control interrupts from serial */ +extern void putDebugChar(char); /* write a single character */ +extern char getDebugChar(void); /* read and return a single char */ + +#endif /* !(__ASSEMBLY__) */ +#endif /* !(_PPC_KGDB_H) */ +#endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/lmb.h b/include/asm-powerpc/lmb.h index 0c5880f7022..b5f9f4c9c29 100644 --- a/include/asm-powerpc/lmb.h +++ b/include/asm-powerpc/lmb.h @@ -1,5 +1,5 @@ -#ifndef _PPC64_LMB_H -#define _PPC64_LMB_H +#ifndef _ASM_POWERPC_LMB_H +#define _ASM_POWERPC_LMB_H #ifdef __KERNEL__ /* @@ -77,4 +77,4 @@ lmb_end_pfn(struct lmb_region *type, unsigned long region_nr) } #endif /* __KERNEL__ */ -#endif /* _PPC64_LMB_H */ +#endif /* _ASM_POWERPC_LMB_H */ diff --git a/include/asm-powerpc/machdep.h b/include/asm-powerpc/machdep.h index 71c6e7eb2a2..6968f4300dc 100644 --- a/include/asm-powerpc/machdep.h +++ b/include/asm-powerpc/machdep.h @@ -51,22 +51,22 @@ struct machdep_calls { #ifdef CONFIG_PPC64 void (*hpte_invalidate)(unsigned long slot, unsigned long va, - int psize, + int psize, int ssize, int local); long (*hpte_updatepp)(unsigned long slot, unsigned long newpp, unsigned long va, - int pize, + int psize, int ssize, int local); void (*hpte_updateboltedpp)(unsigned long newpp, unsigned long ea, - int psize); + int psize, int ssize); long (*hpte_insert)(unsigned long hpte_group, unsigned long va, unsigned long prpn, unsigned long rflags, unsigned long vflags, - int psize); + int psize, int ssize); long (*hpte_remove)(unsigned long hpte_group); void (*flush_hash_range)(unsigned long number, int local); @@ -99,7 +99,7 @@ struct machdep_calls { #endif /* CONFIG_PPC64 */ int (*probe)(void); - void (*setup_arch)(void); + void (*setup_arch)(void); /* Optional, may be NULL */ void (*init_early)(void); /* Optional, may be NULL. */ void (*show_cpuinfo)(struct seq_file *m); diff --git a/include/asm-powerpc/mmu-40x.h b/include/asm-powerpc/mmu-40x.h new file mode 100644 index 00000000000..7d37f77043a --- /dev/null +++ b/include/asm-powerpc/mmu-40x.h @@ -0,0 +1,65 @@ +#ifndef _ASM_POWERPC_MMU_40X_H_ +#define _ASM_POWERPC_MMU_40X_H_ + +/* + * PPC40x support + */ + +#define PPC40X_TLB_SIZE 64 + +/* + * TLB entries are defined by a "high" tag portion and a "low" data + * portion. On all architectures, the data portion is 32-bits. + * + * TLB entries are managed entirely under software control by reading, + * writing, and searchoing using the 4xx-specific tlbre, tlbwr, and tlbsx + * instructions. + */ + +#define TLB_LO 1 +#define TLB_HI 0 + +#define TLB_DATA TLB_LO +#define TLB_TAG TLB_HI + +/* Tag portion */ + +#define TLB_EPN_MASK 0xFFFFFC00 /* Effective Page Number */ +#define TLB_PAGESZ_MASK 0x00000380 +#define TLB_PAGESZ(x) (((x) & 0x7) << 7) +#define PAGESZ_1K 0 +#define PAGESZ_4K 1 +#define PAGESZ_16K 2 +#define PAGESZ_64K 3 +#define PAGESZ_256K 4 +#define PAGESZ_1M 5 +#define PAGESZ_4M 6 +#define PAGESZ_16M 7 +#define TLB_VALID 0x00000040 /* Entry is valid */ + +/* Data portion */ + +#define TLB_RPN_MASK 0xFFFFFC00 /* Real Page Number */ +#define TLB_PERM_MASK 0x00000300 +#define TLB_EX 0x00000200 /* Instruction execution allowed */ +#define TLB_WR 0x00000100 /* Writes permitted */ +#define TLB_ZSEL_MASK 0x000000F0 +#define TLB_ZSEL(x) (((x) & 0xF) << 4) +#define TLB_ATTR_MASK 0x0000000F +#define TLB_W 0x00000008 /* Caching is write-through */ +#define TLB_I 0x00000004 /* Caching is inhibited */ +#define TLB_M 0x00000002 /* Memory is coherent */ +#define TLB_G 0x00000001 /* Memory is guarded from prefetch */ + +#ifndef __ASSEMBLY__ + +typedef unsigned long phys_addr_t; + +typedef struct { + unsigned long id; + unsigned long vdso_base; +} mm_context_t; + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_POWERPC_MMU_40X_H_ */ diff --git a/include/asm-powerpc/mmu-hash64.h b/include/asm-powerpc/mmu-hash64.h index 3112ad14ad9..82328dec2b5 100644 --- a/include/asm-powerpc/mmu-hash64.h +++ b/include/asm-powerpc/mmu-hash64.h @@ -47,6 +47,8 @@ extern char initial_stab[]; /* Bits in the SLB VSID word */ #define SLB_VSID_SHIFT 12 +#define SLB_VSID_SHIFT_1T 24 +#define SLB_VSID_SSIZE_SHIFT 62 #define SLB_VSID_B ASM_CONST(0xc000000000000000) #define SLB_VSID_B_256M ASM_CONST(0x0000000000000000) #define SLB_VSID_B_1T ASM_CONST(0x4000000000000000) @@ -66,6 +68,7 @@ extern char initial_stab[]; #define SLB_VSID_USER (SLB_VSID_KP|SLB_VSID_KS|SLB_VSID_C) #define SLBIE_C (0x08000000) +#define SLBIE_SSIZE_SHIFT 25 /* * Hash table @@ -77,7 +80,7 @@ extern char initial_stab[]; #define HPTE_V_AVPN_SHIFT 7 #define HPTE_V_AVPN ASM_CONST(0x3fffffffffffff80) #define HPTE_V_AVPN_VAL(x) (((x) & HPTE_V_AVPN) >> HPTE_V_AVPN_SHIFT) -#define HPTE_V_COMPARE(x,y) (!(((x) ^ (y)) & HPTE_V_AVPN)) +#define HPTE_V_COMPARE(x,y) (!(((x) ^ (y)) & 0xffffffffffffff80)) #define HPTE_V_BOLTED ASM_CONST(0x0000000000000010) #define HPTE_V_LOCK ASM_CONST(0x0000000000000008) #define HPTE_V_LARGE ASM_CONST(0x0000000000000004) @@ -164,16 +167,19 @@ struct mmu_psize_def #define MMU_SEGSIZE_256M 0 #define MMU_SEGSIZE_1T 1 + #ifndef __ASSEMBLY__ /* - * The current system page sizes + * The current system page and segment sizes */ extern struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT]; extern int mmu_linear_psize; extern int mmu_virtual_psize; extern int mmu_vmalloc_psize; extern int mmu_io_psize; +extern int mmu_kernel_ssize; +extern int mmu_highuser_ssize; /* * If the processor supports 64k normal pages but not 64k cache @@ -195,13 +201,15 @@ extern int mmu_huge_psize; * This function sets the AVPN and L fields of the HPTE appropriately * for the page size */ -static inline unsigned long hpte_encode_v(unsigned long va, int psize) +static inline unsigned long hpte_encode_v(unsigned long va, int psize, + int ssize) { - unsigned long v = + unsigned long v; v = (va >> 23) & ~(mmu_psize_defs[psize].avpnm); v <<= HPTE_V_AVPN_SHIFT; if (psize != MMU_PAGE_4K) v |= HPTE_V_LARGE; + v |= ((unsigned long) ssize) << HPTE_V_SSIZE_SHIFT; return v; } @@ -226,20 +234,40 @@ static inline unsigned long hpte_encode_r(unsigned long pa, int psize) } /* - * This hashes a virtual address for a 256Mb segment only for now + * Build a VA given VSID, EA and segment size */ +static inline unsigned long hpt_va(unsigned long ea, unsigned long vsid, + int ssize) +{ + if (ssize == MMU_SEGSIZE_256M) + return (vsid << 28) | (ea & 0xfffffffUL); + return (vsid << 40) | (ea & 0xffffffffffUL); +} -static inline unsigned long hpt_hash(unsigned long va, unsigned int shift) +/* + * This hashes a virtual address + */ + +static inline unsigned long hpt_hash(unsigned long va, unsigned int shift, + int ssize) { - return ((va >> 28) & 0x7fffffffffUL) ^ ((va & 0x0fffffffUL) >> shift); + unsigned long hash, vsid; + + if (ssize == MMU_SEGSIZE_256M) { + hash = (va >> 28) ^ ((va & 0x0fffffffUL) >> shift); + } else { + vsid = va >> 40; + hash = vsid ^ (vsid << 25) ^ ((va & 0xffffffffffUL) >> shift); + } + return hash & 0x7fffffffffUL; } extern int __hash_page_4K(unsigned long ea, unsigned long access, unsigned long vsid, pte_t *ptep, unsigned long trap, - unsigned int local); + unsigned int local, int ssize); extern int __hash_page_64K(unsigned long ea, unsigned long access, unsigned long vsid, pte_t *ptep, unsigned long trap, - unsigned int local); + unsigned int local, int ssize); struct mm_struct; extern int hash_page(unsigned long ea, unsigned long access, unsigned long trap); extern int hash_huge_page(struct mm_struct *mm, unsigned long access, @@ -248,7 +276,7 @@ extern int hash_huge_page(struct mm_struct *mm, unsigned long access, extern int htab_bolt_mapping(unsigned long vstart, unsigned long vend, unsigned long pstart, unsigned long mode, - int psize); + int psize, int ssize); extern void htab_initialize(void); extern void htab_initialize_secondary(void); @@ -256,6 +284,7 @@ extern void hpte_init_native(void); extern void hpte_init_lpar(void); extern void hpte_init_iSeries(void); extern void hpte_init_beat(void); +extern void hpte_init_beat_v3(void); extern void stabs_alloc(void); extern void slb_initialize(void); @@ -316,12 +345,17 @@ extern void slb_vmalloc_update(void); * which are used by the iSeries firmware. */ -#define VSID_MULTIPLIER ASM_CONST(200730139) /* 28-bit prime */ -#define VSID_BITS 36 -#define VSID_MODULUS ((1UL<<VSID_BITS)-1) +#define VSID_MULTIPLIER_256M ASM_CONST(200730139) /* 28-bit prime */ +#define VSID_BITS_256M 36 +#define VSID_MODULUS_256M ((1UL<<VSID_BITS_256M)-1) -#define CONTEXT_BITS 19 -#define USER_ESID_BITS 16 +#define VSID_MULTIPLIER_1T ASM_CONST(12538073) /* 24-bit prime */ +#define VSID_BITS_1T 24 +#define VSID_MODULUS_1T ((1UL<<VSID_BITS_1T)-1) + +#define CONTEXT_BITS 19 +#define USER_ESID_BITS 16 +#define USER_ESID_BITS_1T 4 #define USER_VSID_RANGE (1UL << (USER_ESID_BITS + SID_SHIFT)) @@ -335,17 +369,17 @@ extern void slb_vmalloc_update(void); * rx = scratch register (clobbered) * * - rt and rx must be different registers - * - The answer will end up in the low 36 bits of rt. The higher + * - The answer will end up in the low VSID_BITS bits of rt. The higher * bits may contain other garbage, so you may need to mask the * result. */ -#define ASM_VSID_SCRAMBLE(rt, rx) \ - lis rx,VSID_MULTIPLIER@h; \ - ori rx,rx,VSID_MULTIPLIER@l; \ +#define ASM_VSID_SCRAMBLE(rt, rx, size) \ + lis rx,VSID_MULTIPLIER_##size@h; \ + ori rx,rx,VSID_MULTIPLIER_##size@l; \ mulld rt,rt,rx; /* rt = rt * MULTIPLIER */ \ \ - srdi rx,rt,VSID_BITS; \ - clrldi rt,rt,(64-VSID_BITS); \ + srdi rx,rt,VSID_BITS_##size; \ + clrldi rt,rt,(64-VSID_BITS_##size); \ add rt,rt,rx; /* add high and low bits */ \ /* Now, r3 == VSID (mod 2^36-1), and lies between 0 and \ * 2^36-1+2^28-1. That in particular means that if r3 >= \ @@ -354,7 +388,7 @@ extern void slb_vmalloc_update(void); * doesn't, the answer is the low 36 bits of r3+1. So in all \ * cases the answer is the low 36 bits of (r3 + ((r3+1) >> 36))*/\ addi rx,rt,1; \ - srdi rx,rx,VSID_BITS; /* extract 2^36 bit */ \ + srdi rx,rx,VSID_BITS_##size; /* extract 2^VSID_BITS bit */ \ add rt,rt,rx @@ -376,37 +410,60 @@ typedef struct { } mm_context_t; -static inline unsigned long vsid_scramble(unsigned long protovsid) -{ #if 0 - /* The code below is equivalent to this function for arguments - * < 2^VSID_BITS, which is all this should ever be called - * with. However gcc is not clever enough to compute the - * modulus (2^n-1) without a second multiply. */ - return ((protovsid * VSID_MULTIPLIER) % VSID_MODULUS); -#else /* 1 */ - unsigned long x; +/* + * The code below is equivalent to this function for arguments + * < 2^VSID_BITS, which is all this should ever be called + * with. However gcc is not clever enough to compute the + * modulus (2^n-1) without a second multiply. + */ +#define vsid_scrample(protovsid, size) \ + ((((protovsid) * VSID_MULTIPLIER_##size) % VSID_MODULUS_##size)) - x = protovsid * VSID_MULTIPLIER; - x = (x >> VSID_BITS) + (x & VSID_MODULUS); - return (x + ((x+1) >> VSID_BITS)) & VSID_MODULUS; +#else /* 1 */ +#define vsid_scramble(protovsid, size) \ + ({ \ + unsigned long x; \ + x = (protovsid) * VSID_MULTIPLIER_##size; \ + x = (x >> VSID_BITS_##size) + (x & VSID_MODULUS_##size); \ + (x + ((x+1) >> VSID_BITS_##size)) & VSID_MODULUS_##size; \ + }) #endif /* 1 */ -} /* This is only valid for addresses >= KERNELBASE */ -static inline unsigned long get_kernel_vsid(unsigned long ea) +static inline unsigned long get_kernel_vsid(unsigned long ea, int ssize) { - return vsid_scramble(ea >> SID_SHIFT); + if (ssize == MMU_SEGSIZE_256M) + return vsid_scramble(ea >> SID_SHIFT, 256M); + return vsid_scramble(ea >> SID_SHIFT_1T, 1T); } -/* This is only valid for user addresses (which are below 2^41) */ -static inline unsigned long get_vsid(unsigned long context, unsigned long ea) +/* Returns the segment size indicator for a user address */ +static inline int user_segment_size(unsigned long addr) { - return vsid_scramble((context << USER_ESID_BITS) - | (ea >> SID_SHIFT)); + /* Use 1T segments if possible for addresses >= 1T */ + if (addr >= (1UL << SID_SHIFT_1T)) + return mmu_highuser_ssize; + return MMU_SEGSIZE_256M; } -#define VSID_SCRAMBLE(pvsid) (((pvsid) * VSID_MULTIPLIER) % VSID_MODULUS) +/* This is only valid for user addresses (which are below 2^44) */ +static inline unsigned long get_vsid(unsigned long context, unsigned long ea, + int ssize) +{ + if (ssize == MMU_SEGSIZE_256M) + return vsid_scramble((context << USER_ESID_BITS) + | (ea >> SID_SHIFT), 256M); + return vsid_scramble((context << USER_ESID_BITS_1T) + | (ea >> SID_SHIFT_1T), 1T); +} + +/* + * This is only used on legacy iSeries in lparmap.c, + * hence the 256MB segment assumption. + */ +#define VSID_SCRAMBLE(pvsid) (((pvsid) * VSID_MULTIPLIER_256M) % \ + VSID_MODULUS_256M) #define KERNEL_VSID(ea) VSID_SCRAMBLE(GET_ESID(ea)) /* Physical address used by some IO functions */ diff --git a/include/asm-powerpc/mmu.h b/include/asm-powerpc/mmu.h index d44d211e758..4c0e1b4f975 100644 --- a/include/asm-powerpc/mmu.h +++ b/include/asm-powerpc/mmu.h @@ -8,6 +8,9 @@ #elif defined(CONFIG_PPC_STD_MMU) /* 32-bit classic hash table MMU */ # include <asm/mmu-hash32.h> +#elif defined(CONFIG_40x) +/* 40x-style software loaded TLB */ +# include <asm/mmu-40x.h> #elif defined(CONFIG_44x) /* 44x-style software loaded TLB */ # include <asm/mmu-44x.h> diff --git a/include/asm-powerpc/mpc52xx.h b/include/asm-powerpc/mpc52xx.h index c4631f6dd4f..24751df791a 100644 --- a/include/asm-powerpc/mpc52xx.h +++ b/include/asm-powerpc/mpc52xx.h @@ -243,7 +243,7 @@ struct mpc52xx_cdm { extern void __iomem * mpc52xx_find_and_map(const char *); extern unsigned int mpc52xx_find_ipb_freq(struct device_node *node); -extern void mpc52xx_setup_cpu(void); +extern void mpc5200_setup_xlb_arbiter(void); extern void mpc52xx_declare_of_platform_devices(void); extern void mpc52xx_init_irq(void); @@ -262,6 +262,16 @@ struct mpc52xx_suspend { extern struct mpc52xx_suspend mpc52xx_suspend; extern int __init mpc52xx_pm_init(void); extern int mpc52xx_set_wakeup_gpio(u8 pin, u8 level); + +#ifdef CONFIG_PPC_LITE5200 +extern int __init lite5200_pm_init(void); + +/* lite5200 calls mpc5200 suspend functions, so here they are */ +extern int mpc52xx_pm_prepare(suspend_state_t); +extern int mpc52xx_pm_enter(suspend_state_t); +extern int mpc52xx_pm_finish(suspend_state_t); +extern char saved_sram[0x4000]; /* reuse buffer from mpc52xx suspend */ +#endif #endif /* CONFIG_PM */ #endif /* __ASM_POWERPC_MPC52xx_H__ */ diff --git a/include/asm-powerpc/mpc52xx_psc.h b/include/asm-powerpc/mpc52xx_psc.h new file mode 100644 index 00000000000..26690d2b32f --- /dev/null +++ b/include/asm-powerpc/mpc52xx_psc.h @@ -0,0 +1,191 @@ +/* + * include/asm-ppc/mpc52xx_psc.h + * + * Definitions of consts/structs to drive the Freescale MPC52xx OnChip + * PSCs. Theses are shared between multiple drivers since a PSC can be + * UART, AC97, IR, I2S, ... So this header is in asm-ppc. + * + * + * Maintainer : Sylvain Munaut <tnt@246tNt.com> + * + * Based/Extracted from some header of the 2.4 originally written by + * Dale Farnsworth <dfarnsworth@mvista.com> + * + * Copyright (C) 2004 Sylvain Munaut <tnt@246tNt.com> + * Copyright (C) 2003 MontaVista, Software, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#ifndef __ASM_MPC52xx_PSC_H__ +#define __ASM_MPC52xx_PSC_H__ + +#include <asm/types.h> + +/* Max number of PSCs */ +#define MPC52xx_PSC_MAXNUM 6 + +/* Programmable Serial Controller (PSC) status register bits */ +#define MPC52xx_PSC_SR_CDE 0x0080 +#define MPC52xx_PSC_SR_RXRDY 0x0100 +#define MPC52xx_PSC_SR_RXFULL 0x0200 +#define MPC52xx_PSC_SR_TXRDY 0x0400 +#define MPC52xx_PSC_SR_TXEMP 0x0800 +#define MPC52xx_PSC_SR_OE 0x1000 +#define MPC52xx_PSC_SR_PE 0x2000 +#define MPC52xx_PSC_SR_FE 0x4000 +#define MPC52xx_PSC_SR_RB 0x8000 + +/* PSC Command values */ +#define MPC52xx_PSC_RX_ENABLE 0x0001 +#define MPC52xx_PSC_RX_DISABLE 0x0002 +#define MPC52xx_PSC_TX_ENABLE 0x0004 +#define MPC52xx_PSC_TX_DISABLE 0x0008 +#define MPC52xx_PSC_SEL_MODE_REG_1 0x0010 +#define MPC52xx_PSC_RST_RX 0x0020 +#define MPC52xx_PSC_RST_TX 0x0030 +#define MPC52xx_PSC_RST_ERR_STAT 0x0040 +#define MPC52xx_PSC_RST_BRK_CHG_INT 0x0050 +#define MPC52xx_PSC_START_BRK 0x0060 +#define MPC52xx_PSC_STOP_BRK 0x0070 + +/* PSC TxRx FIFO status bits */ +#define MPC52xx_PSC_RXTX_FIFO_ERR 0x0040 +#define MPC52xx_PSC_RXTX_FIFO_UF 0x0020 +#define MPC52xx_PSC_RXTX_FIFO_OF 0x0010 +#define MPC52xx_PSC_RXTX_FIFO_FR 0x0008 +#define MPC52xx_PSC_RXTX_FIFO_FULL 0x0004 +#define MPC52xx_PSC_RXTX_FIFO_ALARM 0x0002 +#define MPC52xx_PSC_RXTX_FIFO_EMPTY 0x0001 + +/* PSC interrupt mask bits */ +#define MPC52xx_PSC_IMR_TXRDY 0x0100 +#define MPC52xx_PSC_IMR_RXRDY 0x0200 +#define MPC52xx_PSC_IMR_DB 0x0400 +#define MPC52xx_PSC_IMR_IPC 0x8000 + +/* PSC input port change bit */ +#define MPC52xx_PSC_CTS 0x01 +#define MPC52xx_PSC_DCD 0x02 +#define MPC52xx_PSC_D_CTS 0x10 +#define MPC52xx_PSC_D_DCD 0x20 + +/* PSC mode fields */ +#define MPC52xx_PSC_MODE_5_BITS 0x00 +#define MPC52xx_PSC_MODE_6_BITS 0x01 +#define MPC52xx_PSC_MODE_7_BITS 0x02 +#define MPC52xx_PSC_MODE_8_BITS 0x03 +#define MPC52xx_PSC_MODE_BITS_MASK 0x03 +#define MPC52xx_PSC_MODE_PAREVEN 0x00 +#define MPC52xx_PSC_MODE_PARODD 0x04 +#define MPC52xx_PSC_MODE_PARFORCE 0x08 +#define MPC52xx_PSC_MODE_PARNONE 0x10 +#define MPC52xx_PSC_MODE_ERR 0x20 +#define MPC52xx_PSC_MODE_FFULL 0x40 +#define MPC52xx_PSC_MODE_RXRTS 0x80 + +#define MPC52xx_PSC_MODE_ONE_STOP_5_BITS 0x00 +#define MPC52xx_PSC_MODE_ONE_STOP 0x07 +#define MPC52xx_PSC_MODE_TWO_STOP 0x0f + +#define MPC52xx_PSC_RFNUM_MASK 0x01ff + + +/* Structure of the hardware registers */ +struct mpc52xx_psc { + u8 mode; /* PSC + 0x00 */ + u8 reserved0[3]; + union { /* PSC + 0x04 */ + u16 status; + u16 clock_select; + } sr_csr; +#define mpc52xx_psc_status sr_csr.status +#define mpc52xx_psc_clock_select sr_csr.clock_select + u16 reserved1; + u8 command; /* PSC + 0x08 */ + u8 reserved2[3]; + union { /* PSC + 0x0c */ + u8 buffer_8; + u16 buffer_16; + u32 buffer_32; + } buffer; +#define mpc52xx_psc_buffer_8 buffer.buffer_8 +#define mpc52xx_psc_buffer_16 buffer.buffer_16 +#define mpc52xx_psc_buffer_32 buffer.buffer_32 + union { /* PSC + 0x10 */ + u8 ipcr; + u8 acr; + } ipcr_acr; +#define mpc52xx_psc_ipcr ipcr_acr.ipcr +#define mpc52xx_psc_acr ipcr_acr.acr + u8 reserved3[3]; + union { /* PSC + 0x14 */ + u16 isr; + u16 imr; + } isr_imr; +#define mpc52xx_psc_isr isr_imr.isr +#define mpc52xx_psc_imr isr_imr.imr + u16 reserved4; + u8 ctur; /* PSC + 0x18 */ + u8 reserved5[3]; + u8 ctlr; /* PSC + 0x1c */ + u8 reserved6[3]; + u16 ccr; /* PSC + 0x20 */ + u8 reserved7[14]; + u8 ivr; /* PSC + 0x30 */ + u8 reserved8[3]; + u8 ip; /* PSC + 0x34 */ + u8 reserved9[3]; + u8 op1; /* PSC + 0x38 */ + u8 reserved10[3]; + u8 op0; /* PSC + 0x3c */ + u8 reserved11[3]; + u32 sicr; /* PSC + 0x40 */ + u8 ircr1; /* PSC + 0x44 */ + u8 reserved13[3]; + u8 ircr2; /* PSC + 0x44 */ + u8 reserved14[3]; + u8 irsdr; /* PSC + 0x4c */ + u8 reserved15[3]; + u8 irmdr; /* PSC + 0x50 */ + u8 reserved16[3]; + u8 irfdr; /* PSC + 0x54 */ + u8 reserved17[3]; + u16 rfnum; /* PSC + 0x58 */ + u16 reserved18; + u16 tfnum; /* PSC + 0x5c */ + u16 reserved19; + u32 rfdata; /* PSC + 0x60 */ + u16 rfstat; /* PSC + 0x64 */ + u16 reserved20; + u8 rfcntl; /* PSC + 0x68 */ + u8 reserved21[5]; + u16 rfalarm; /* PSC + 0x6e */ + u16 reserved22; + u16 rfrptr; /* PSC + 0x72 */ + u16 reserved23; + u16 rfwptr; /* PSC + 0x76 */ + u16 reserved24; + u16 rflrfptr; /* PSC + 0x7a */ + u16 reserved25; + u16 rflwfptr; /* PSC + 0x7e */ + u32 tfdata; /* PSC + 0x80 */ + u16 tfstat; /* PSC + 0x84 */ + u16 reserved26; + u8 tfcntl; /* PSC + 0x88 */ + u8 reserved27[5]; + u16 tfalarm; /* PSC + 0x8e */ + u16 reserved28; + u16 tfrptr; /* PSC + 0x92 */ + u16 reserved29; + u16 tfwptr; /* PSC + 0x96 */ + u16 reserved30; + u16 tflrfptr; /* PSC + 0x9a */ + u16 reserved31; + u16 tflwfptr; /* PSC + 0x9e */ +}; + + +#endif /* __ASM_MPC52xx_PSC_H__ */ diff --git a/include/asm-powerpc/mpc85xx.h b/include/asm-powerpc/mpc85xx.h deleted file mode 100644 index 54142997a58..00000000000 --- a/include/asm-powerpc/mpc85xx.h +++ /dev/null @@ -1,45 +0,0 @@ -/* - * include/asm-powerpc/mpc85xx.h - * - * MPC85xx definitions - * - * Maintainer: Kumar Gala <galak@kernel.crashing.org> - * - * Copyright 2004 Freescale Semiconductor, Inc - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifdef __KERNEL__ -#ifndef __ASM_MPC85xx_H__ -#define __ASM_MPC85xx_H__ - -#include <asm/mmu.h> - -#ifdef CONFIG_85xx - -#if defined(CONFIG_MPC8540_ADS) || defined(CONFIG_MPC8560_ADS) -#include <platforms/85xx/mpc85xx_ads.h> -#endif -#if defined(CONFIG_MPC8555_CDS) || defined(CONFIG_MPC8548_CDS) -#include <platforms/85xx/mpc8555_cds.h> -#endif -#ifdef CONFIG_MPC85xx_CDS -#include <platforms/85xx/mpc85xx_cds.h> -#endif - -/* Let modules/drivers get at CCSRBAR */ -extern phys_addr_t get_ccsrbar(void); - -#ifdef MODULE -#define CCSRBAR get_ccsrbar() -#else -#define CCSRBAR BOARD_CCSRBAR -#endif - -#endif /* CONFIG_85xx */ -#endif /* __ASM_MPC85xx_H__ */ -#endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/mpic.h b/include/asm-powerpc/mpic.h index 262db6b8da7..ae84dde3bc7 100644 --- a/include/asm-powerpc/mpic.h +++ b/include/asm-powerpc/mpic.h @@ -224,8 +224,6 @@ struct mpic_reg_bank { u32 __iomem *base; #ifdef CONFIG_PPC_DCR dcr_host_t dhost; - unsigned int dbase; - unsigned int doff; #endif /* CONFIG_PPC_DCR */ }; @@ -240,9 +238,6 @@ struct mpic_irq_save { /* The instance data of a given MPIC */ struct mpic { - /* The device node of the interrupt controller */ - struct device_node *of_node; - /* The remapper for this MPIC */ struct irq_host *irqhost; @@ -292,10 +287,6 @@ struct mpic struct mpic_reg_bank cpuregs[MPIC_MAX_CPUS]; struct mpic_reg_bank isus[MPIC_MAX_ISU]; -#ifdef CONFIG_PPC_DCR - unsigned int dcr_base; -#endif - /* Protected sources */ unsigned long *protected; @@ -309,6 +300,10 @@ struct mpic unsigned long *hwirq_bitmap; #endif +#ifdef CONFIG_MPIC_BROKEN_REGREAD + u32 isu_reg0_shadow[MPIC_MAX_IRQ_SOURCES]; +#endif + /* link */ struct mpic *next; diff --git a/include/asm-powerpc/nvram.h b/include/asm-powerpc/nvram.h index f3563e11e26..9877982508b 100644 --- a/include/asm-powerpc/nvram.h +++ b/include/asm-powerpc/nvram.h @@ -63,8 +63,10 @@ struct nvram_partition { }; -extern int nvram_write_error_log(char * buff, int length, unsigned int err_type); -extern int nvram_read_error_log(char * buff, int length, unsigned int * err_type); +extern int nvram_write_error_log(char * buff, int length, + unsigned int err_type, unsigned int err_seq); +extern int nvram_read_error_log(char * buff, int length, + unsigned int * err_type, unsigned int *err_seq); extern int nvram_clear_error_log(void); extern struct nvram_partition *nvram_find_partition(int sig, const char *name); diff --git a/include/asm-powerpc/paca.h b/include/asm-powerpc/paca.h index c6a5b173566..fcd7b428ed0 100644 --- a/include/asm-powerpc/paca.h +++ b/include/asm-powerpc/paca.h @@ -21,7 +21,18 @@ #include <asm/mmu.h> register struct paca_struct *local_paca asm("r13"); + +#if defined(CONFIG_DEBUG_PREEMPT) && defined(CONFIG_SMP) +extern unsigned int debug_smp_processor_id(void); /* from linux/smp.h */ +/* + * Add standard checks that preemption cannot occur when using get_paca(): + * otherwise the paca_struct it points to may be the wrong one just after. + */ +#define get_paca() ((void) debug_smp_processor_id(), local_paca) +#else #define get_paca() local_paca +#endif + #define get_lppaca() (get_paca()->lppaca_ptr) #define get_slb_shadow() (get_paca()->slb_shadow_ptr) diff --git a/include/asm-powerpc/page_64.h b/include/asm-powerpc/page_64.h index 3448a3d4bc6..4ee82c61e4d 100644 --- a/include/asm-powerpc/page_64.h +++ b/include/asm-powerpc/page_64.h @@ -26,12 +26,18 @@ */ #define PAGE_FACTOR (PAGE_SHIFT - HW_PAGE_SHIFT) -/* Segment size */ +/* Segment size; normal 256M segments */ #define SID_SHIFT 28 -#define SID_MASK 0xfffffffffUL +#define SID_MASK ASM_CONST(0xfffffffff) #define ESID_MASK 0xfffffffff0000000UL #define GET_ESID(x) (((x) >> SID_SHIFT) & SID_MASK) +/* 1T segments */ +#define SID_SHIFT_1T 40 +#define SID_MASK_1T 0xffffffUL +#define ESID_MASK_1T 0xffffff0000000000UL +#define GET_ESID_1T(x) (((x) >> SID_SHIFT_1T) & SID_MASK_1T) + #ifndef __ASSEMBLY__ #include <asm/cache.h> @@ -121,6 +127,7 @@ extern unsigned int get_slice_psize(struct mm_struct *mm, extern void slice_init_context(struct mm_struct *mm, unsigned int psize); extern void slice_set_user_psize(struct mm_struct *mm, unsigned int psize); +#define slice_mm_new_context(mm) ((mm)->context.id == 0) #define ARCH_HAS_HUGEPAGE_ONLY_RANGE extern int is_hugepage_only_range(struct mm_struct *m, @@ -130,6 +137,12 @@ extern int is_hugepage_only_range(struct mm_struct *m, #endif /* __ASSEMBLY__ */ #else #define slice_init() +#define slice_set_user_psize(mm, psize) \ +do { \ + (mm)->context.user_psize = (psize); \ + (mm)->context.sllp = SLB_VSID_USER | mmu_psize_defs[(psize)].sllp; \ +} while (0) +#define slice_mm_new_context(mm) 1 #endif /* CONFIG_PPC_MM_SLICES */ #ifdef CONFIG_HUGETLB_PAGE diff --git a/include/asm-powerpc/pci-bridge.h b/include/asm-powerpc/pci-bridge.h index e909769b641..dc318458b5f 100644 --- a/include/asm-powerpc/pci-bridge.h +++ b/include/asm-powerpc/pci-bridge.h @@ -98,7 +98,8 @@ extern int early_find_capability(struct pci_controller *hose, int bus, int dev_fn, int cap); extern void setup_indirect_pci(struct pci_controller* hose, - u32 cfg_addr, u32 cfg_data, u32 flags); + resource_size_t cfg_addr, + resource_size_t cfg_data, u32 flags); extern void setup_grackle(struct pci_controller *hose); extern void __init update_bridge_resource(struct pci_dev *dev, struct resource *res); diff --git a/include/asm-powerpc/percpu.h b/include/asm-powerpc/percpu.h index 73dc8ba4010..6b229626d3f 100644 --- a/include/asm-powerpc/percpu.h +++ b/include/asm-powerpc/percpu.h @@ -28,7 +28,7 @@ /* var is in discarded region: offset to particular copy we want */ #define per_cpu(var, cpu) (*RELOC_HIDE(&per_cpu__##var, __per_cpu_offset(cpu))) #define __get_cpu_var(var) (*RELOC_HIDE(&per_cpu__##var, __my_cpu_offset())) -#define __raw_get_cpu_var(var) (*RELOC_HIDE(&per_cpu__##var, __my_cpu_offset())) +#define __raw_get_cpu_var(var) (*RELOC_HIDE(&per_cpu__##var, local_paca->data_offset)) /* A macro to avoid #include hell... */ #define percpu_modcopy(pcpudst, src, size) \ diff --git a/include/asm-powerpc/pgtable-4k.h b/include/asm-powerpc/pgtable-4k.h index add5481fd7c..818e2abc81e 100644 --- a/include/asm-powerpc/pgtable-4k.h +++ b/include/asm-powerpc/pgtable-4k.h @@ -10,10 +10,12 @@ #define PUD_INDEX_SIZE 7 #define PGD_INDEX_SIZE 9 +#ifndef __ASSEMBLY__ #define PTE_TABLE_SIZE (sizeof(pte_t) << PTE_INDEX_SIZE) #define PMD_TABLE_SIZE (sizeof(pmd_t) << PMD_INDEX_SIZE) #define PUD_TABLE_SIZE (sizeof(pud_t) << PUD_INDEX_SIZE) #define PGD_TABLE_SIZE (sizeof(pgd_t) << PGD_INDEX_SIZE) +#endif /* __ASSEMBLY__ */ #define PTRS_PER_PTE (1 << PTE_INDEX_SIZE) #define PTRS_PER_PMD (1 << PMD_INDEX_SIZE) diff --git a/include/asm-powerpc/pgtable-64k.h b/include/asm-powerpc/pgtable-64k.h index 33ae9018fe7..bd54b772fbc 100644 --- a/include/asm-powerpc/pgtable-64k.h +++ b/include/asm-powerpc/pgtable-64k.h @@ -9,9 +9,11 @@ #define PUD_INDEX_SIZE 0 #define PGD_INDEX_SIZE 4 +#ifndef __ASSEMBLY__ #define PTE_TABLE_SIZE (sizeof(real_pte_t) << PTE_INDEX_SIZE) #define PMD_TABLE_SIZE (sizeof(pmd_t) << PMD_INDEX_SIZE) #define PGD_TABLE_SIZE (sizeof(pgd_t) << PGD_INDEX_SIZE) +#endif /* __ASSEMBLY__ */ #define PTRS_PER_PTE (1 << PTE_INDEX_SIZE) #define PTRS_PER_PMD (1 << PMD_INDEX_SIZE) diff --git a/include/asm-powerpc/ppc_asm.h b/include/asm-powerpc/ppc_asm.h index 65325721446..2dbd4e7884f 100644 --- a/include/asm-powerpc/ppc_asm.h +++ b/include/asm-powerpc/ppc_asm.h @@ -155,6 +155,20 @@ name: \ .type GLUE(.,name),@function; \ GLUE(.,name): +#define _INIT_GLOBAL(name) \ + .section ".text.init.refok"; \ + .align 2 ; \ + .globl name; \ + .globl GLUE(.,name); \ + .section ".opd","aw"; \ +name: \ + .quad GLUE(.,name); \ + .quad .TOC.@tocbase; \ + .quad 0; \ + .previous; \ + .type GLUE(.,name),@function; \ +GLUE(.,name): + #define _KPROBE(name) \ .section ".kprobes.text","a"; \ .align 2 ; \ @@ -195,6 +209,10 @@ GLUE(.,name): #else /* 32-bit */ +#define _ENTRY(n) \ + .globl n; \ +n: + #define _GLOBAL(n) \ .text; \ .stabs __stringify(n:F-1),N_FUN,0,0,n;\ diff --git a/include/asm-powerpc/processor.h b/include/asm-powerpc/processor.h index e28b1080515..dba7c948189 100644 --- a/include/asm-powerpc/processor.h +++ b/include/asm-powerpc/processor.h @@ -145,9 +145,9 @@ struct thread_struct { unsigned long dabr; /* Data address breakpoint register */ #ifdef CONFIG_ALTIVEC /* Complete AltiVec register set */ - vector128 vr[32] __attribute((aligned(16))); + vector128 vr[32] __attribute__((aligned(16))); /* AltiVec status */ - vector128 vscr __attribute((aligned(16))); + vector128 vscr __attribute__((aligned(16))); unsigned long vrsave; int used_vr; /* set if process has used altivec */ #endif /* CONFIG_ALTIVEC */ diff --git a/include/asm-powerpc/prom.h b/include/asm-powerpc/prom.h index 672083787a1..925e2d384bb 100644 --- a/include/asm-powerpc/prom.h +++ b/include/asm-powerpc/prom.h @@ -24,7 +24,7 @@ #define OF_ROOT_NODE_ADDR_CELLS_DEFAULT 1 #define OF_ROOT_NODE_SIZE_CELLS_DEFAULT 1 -#define of_compat_cmp(s1, s2, l) strncasecmp((s1), (s2), (l)) +#define of_compat_cmp(s1, s2, l) strcasecmp((s1), (s2)) #define of_prop_cmp(s1, s2) strcmp((s1), (s2)) #define of_node_cmp(s1, s2) strcasecmp((s1), (s2)) @@ -145,7 +145,6 @@ extern void of_detach_node(struct device_node *); extern void finish_device_tree(void); extern void unflatten_device_tree(void); extern void early_init_devtree(void *); -#define device_is_compatible(d, c) of_device_is_compatible((d), (c)) extern int machine_is_compatible(const char *compat); extern void print_properties(struct device_node *node); extern int prom_n_intr_cells(struct device_node* np); diff --git a/include/asm-powerpc/ps3.h b/include/asm-powerpc/ps3.h index a6f3f5ee7ca..f577a16c672 100644 --- a/include/asm-powerpc/ps3.h +++ b/include/asm-powerpc/ps3.h @@ -229,6 +229,9 @@ enum lv1_result { LV1_INVALID_CLASS_ID = -21, LV1_CONSTRAINT_NOT_SATISFIED = -22, LV1_ALIGNMENT_ERROR = -23, + LV1_HARDWARE_ERROR = -24, + LV1_INVALID_DATA_FORMAT = -25, + LV1_INVALID_OPERATION = -26, LV1_INTERNAL_ERROR = -32768, }; @@ -284,6 +287,12 @@ static inline const char* ps3_result(int result) return "LV1_CONSTRAINT_NOT_SATISFIED (-22)"; case LV1_ALIGNMENT_ERROR: return "LV1_ALIGNMENT_ERROR (-23)"; + case LV1_HARDWARE_ERROR: + return "LV1_HARDWARE_ERROR (-24)"; + case LV1_INVALID_DATA_FORMAT: + return "LV1_INVALID_DATA_FORMAT (-25)"; + case LV1_INVALID_OPERATION: + return "LV1_INVALID_OPERATION (-26)"; case LV1_INTERNAL_ERROR: return "LV1_INTERNAL_ERROR (-32768)"; default: diff --git a/include/asm-powerpc/qe.h b/include/asm-powerpc/qe.h index 9d304b1f160..0dabe46a29d 100644 --- a/include/asm-powerpc/qe.h +++ b/include/asm-powerpc/qe.h @@ -32,10 +32,13 @@ extern void qe_reset(void); extern int par_io_init(struct device_node *np); extern int par_io_of_config(struct device_node *np); +extern int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain, + int assignment, int has_irq); +extern int par_io_data_set(u8 port, u8 pin, u8 val); /* QE internal API */ int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input); -void qe_setbrg(u32 brg, u32 rate); +void qe_setbrg(unsigned int brg, unsigned int rate, unsigned int multiplier); int qe_get_snum(void); void qe_put_snum(u8 snum); unsigned long qe_muram_alloc(int size, int align); @@ -46,14 +49,28 @@ void *qe_muram_addr(unsigned long offset); /* Buffer descriptors */ struct qe_bd { - u16 status; - u16 length; - u32 buf; + __be16 status; + __be16 length; + __be32 buf; } __attribute__ ((packed)); #define BD_STATUS_MASK 0xffff0000 #define BD_LENGTH_MASK 0x0000ffff +#define BD_SC_EMPTY 0x8000 /* Receive is empty */ +#define BD_SC_READY 0x8000 /* Transmit is ready */ +#define BD_SC_WRAP 0x2000 /* Last buffer descriptor */ +#define BD_SC_INTRPT 0x1000 /* Interrupt on change */ +#define BD_SC_LAST 0x0800 /* Last buffer in frame */ +#define BD_SC_CM 0x0200 /* Continous mode */ +#define BD_SC_ID 0x0100 /* Rec'd too many idles */ +#define BD_SC_P 0x0100 /* xmt preamble */ +#define BD_SC_BR 0x0020 /* Break received */ +#define BD_SC_FR 0x0010 /* Framing error */ +#define BD_SC_PR 0x0008 /* Parity error */ +#define BD_SC_OV 0x0002 /* Overrun */ +#define BD_SC_CD 0x0001 /* ?? */ + /* Alignment */ #define QE_INTR_TABLE_ALIGN 16 /* ??? */ #define QE_ALIGNMENT_OF_BD 8 @@ -266,15 +283,12 @@ enum qe_clock { /* QE CECR Protocol - For non-MCC, specifies mode for QE CECR command */ #define QE_CR_PROTOCOL_UNSPECIFIED 0x00 /* For all other protocols */ #define QE_CR_PROTOCOL_HDLC_TRANSPARENT 0x00 +#define QE_CR_PROTOCOL_QMC 0x02 +#define QE_CR_PROTOCOL_UART 0x04 #define QE_CR_PROTOCOL_ATM_POS 0x0A #define QE_CR_PROTOCOL_ETHERNET 0x0C #define QE_CR_PROTOCOL_L2_SWITCH 0x0D -/* BMR byte order */ -#define QE_BMR_BYTE_ORDER_BO_PPC 0x08 /* powerpc little endian */ -#define QE_BMR_BYTE_ORDER_BO_MOT 0x10 /* motorola big endian */ -#define QE_BMR_BYTE_ORDER_BO_MAX 0x18 - /* BRG configuration register */ #define QE_BRGC_ENABLE 0x00010000 #define QE_BRGC_DIVISOR_SHIFT 1 @@ -321,41 +335,41 @@ enum qe_clock { #define UPGCR_ADDR 0x10000000 /* Master MPHY Addr multiplexing */ #define UPGCR_DIAG 0x01000000 /* Diagnostic mode */ -/* UCC */ +/* UCC GUEMR register */ #define UCC_GUEMR_MODE_MASK_RX 0x02 -#define UCC_GUEMR_MODE_MASK_TX 0x01 #define UCC_GUEMR_MODE_FAST_RX 0x02 -#define UCC_GUEMR_MODE_FAST_TX 0x01 #define UCC_GUEMR_MODE_SLOW_RX 0x00 +#define UCC_GUEMR_MODE_MASK_TX 0x01 +#define UCC_GUEMR_MODE_FAST_TX 0x01 #define UCC_GUEMR_MODE_SLOW_TX 0x00 +#define UCC_GUEMR_MODE_MASK (UCC_GUEMR_MODE_MASK_RX | UCC_GUEMR_MODE_MASK_TX) #define UCC_GUEMR_SET_RESERVED3 0x10 /* Bit 3 in the guemr is reserved but must be set 1 */ /* structure representing UCC SLOW parameter RAM */ struct ucc_slow_pram { - u16 rbase; /* RX BD base address */ - u16 tbase; /* TX BD base address */ - u8 rfcr; /* Rx function code */ - u8 tfcr; /* Tx function code */ - u16 mrblr; /* Rx buffer length */ - u32 rstate; /* Rx internal state */ - u32 rptr; /* Rx internal data pointer */ - u16 rbptr; /* rb BD Pointer */ - u16 rcount; /* Rx internal byte count */ - u32 rtemp; /* Rx temp */ - u32 tstate; /* Tx internal state */ - u32 tptr; /* Tx internal data pointer */ - u16 tbptr; /* Tx BD pointer */ - u16 tcount; /* Tx byte count */ - u32 ttemp; /* Tx temp */ - u32 rcrc; /* temp receive CRC */ - u32 tcrc; /* temp transmit CRC */ + __be16 rbase; /* RX BD base address */ + __be16 tbase; /* TX BD base address */ + u8 rbmr; /* RX bus mode register (same as CPM's RFCR) */ + u8 tbmr; /* TX bus mode register (same as CPM's TFCR) */ + __be16 mrblr; /* Rx buffer length */ + __be32 rstate; /* Rx internal state */ + __be32 rptr; /* Rx internal data pointer */ + __be16 rbptr; /* rb BD Pointer */ + __be16 rcount; /* Rx internal byte count */ + __be32 rtemp; /* Rx temp */ + __be32 tstate; /* Tx internal state */ + __be32 tptr; /* Tx internal data pointer */ + __be16 tbptr; /* Tx BD pointer */ + __be16 tcount; /* Tx byte count */ + __be32 ttemp; /* Tx temp */ + __be32 rcrc; /* temp receive CRC */ + __be32 tcrc; /* temp transmit CRC */ } __attribute__ ((packed)); /* General UCC SLOW Mode Register (GUMRH & GUMRL) */ -#define UCC_SLOW_GUMR_H_CRC16 0x00004000 -#define UCC_SLOW_GUMR_H_CRC16CCITT 0x00000000 -#define UCC_SLOW_GUMR_H_CRC32CCITT 0x00008000 +#define UCC_SLOW_GUMR_H_SAM_QMC 0x00000000 +#define UCC_SLOW_GUMR_H_SAM_SATM 0x00008000 #define UCC_SLOW_GUMR_H_REVD 0x00002000 #define UCC_SLOW_GUMR_H_TRX 0x00001000 #define UCC_SLOW_GUMR_H_TTX 0x00000800 @@ -375,9 +389,33 @@ struct ucc_slow_pram { #define UCC_SLOW_GUMR_L_TCI 0x10000000 #define UCC_SLOW_GUMR_L_RINV 0x02000000 #define UCC_SLOW_GUMR_L_TINV 0x01000000 -#define UCC_SLOW_GUMR_L_TEND 0x00020000 +#define UCC_SLOW_GUMR_L_TEND 0x00040000 +#define UCC_SLOW_GUMR_L_TDCR_MASK 0x00030000 +#define UCC_SLOW_GUMR_L_TDCR_32 0x00030000 +#define UCC_SLOW_GUMR_L_TDCR_16 0x00020000 +#define UCC_SLOW_GUMR_L_TDCR_8 0x00010000 +#define UCC_SLOW_GUMR_L_TDCR_1 0x00000000 +#define UCC_SLOW_GUMR_L_RDCR_MASK 0x0000c000 +#define UCC_SLOW_GUMR_L_RDCR_32 0x0000c000 +#define UCC_SLOW_GUMR_L_RDCR_16 0x00008000 +#define UCC_SLOW_GUMR_L_RDCR_8 0x00004000 +#define UCC_SLOW_GUMR_L_RDCR_1 0x00000000 +#define UCC_SLOW_GUMR_L_RENC_NRZI 0x00000800 +#define UCC_SLOW_GUMR_L_RENC_NRZ 0x00000000 +#define UCC_SLOW_GUMR_L_TENC_NRZI 0x00000100 +#define UCC_SLOW_GUMR_L_TENC_NRZ 0x00000000 +#define UCC_SLOW_GUMR_L_DIAG_MASK 0x000000c0 +#define UCC_SLOW_GUMR_L_DIAG_LE 0x000000c0 +#define UCC_SLOW_GUMR_L_DIAG_ECHO 0x00000080 +#define UCC_SLOW_GUMR_L_DIAG_LOOP 0x00000040 +#define UCC_SLOW_GUMR_L_DIAG_NORM 0x00000000 #define UCC_SLOW_GUMR_L_ENR 0x00000020 #define UCC_SLOW_GUMR_L_ENT 0x00000010 +#define UCC_SLOW_GUMR_L_MODE_MASK 0x0000000F +#define UCC_SLOW_GUMR_L_MODE_BISYNC 0x00000008 +#define UCC_SLOW_GUMR_L_MODE_AHDLC 0x00000006 +#define UCC_SLOW_GUMR_L_MODE_UART 0x00000004 +#define UCC_SLOW_GUMR_L_MODE_QMC 0x00000002 /* General UCC FAST Mode Register */ #define UCC_FAST_GUMR_TCI 0x20000000 @@ -394,53 +432,111 @@ struct ucc_slow_pram { #define UCC_FAST_GUMR_ENR 0x00000020 #define UCC_FAST_GUMR_ENT 0x00000010 -/* Slow UCC Event Register (UCCE) */ -#define UCC_SLOW_UCCE_GLR 0x1000 -#define UCC_SLOW_UCCE_GLT 0x0800 -#define UCC_SLOW_UCCE_DCC 0x0400 -#define UCC_SLOW_UCCE_FLG 0x0200 -#define UCC_SLOW_UCCE_AB 0x0200 -#define UCC_SLOW_UCCE_IDLE 0x0100 -#define UCC_SLOW_UCCE_GRA 0x0080 -#define UCC_SLOW_UCCE_TXE 0x0010 -#define UCC_SLOW_UCCE_RXF 0x0008 -#define UCC_SLOW_UCCE_CCR 0x0008 -#define UCC_SLOW_UCCE_RCH 0x0008 -#define UCC_SLOW_UCCE_BSY 0x0004 -#define UCC_SLOW_UCCE_TXB 0x0002 -#define UCC_SLOW_UCCE_TX 0x0002 -#define UCC_SLOW_UCCE_RX 0x0001 -#define UCC_SLOW_UCCE_GOV 0x0001 -#define UCC_SLOW_UCCE_GUN 0x0002 -#define UCC_SLOW_UCCE_GINT 0x0004 -#define UCC_SLOW_UCCE_IQOV 0x0008 - -#define UCC_SLOW_UCCE_HDLC_SET (UCC_SLOW_UCCE_TXE | UCC_SLOW_UCCE_BSY | \ - UCC_SLOW_UCCE_GRA | UCC_SLOW_UCCE_TXB | UCC_SLOW_UCCE_RXF | \ - UCC_SLOW_UCCE_DCC | UCC_SLOW_UCCE_GLT | UCC_SLOW_UCCE_GLR) -#define UCC_SLOW_UCCE_ENET_SET (UCC_SLOW_UCCE_TXE | UCC_SLOW_UCCE_BSY | \ - UCC_SLOW_UCCE_GRA | UCC_SLOW_UCCE_TXB | UCC_SLOW_UCCE_RXF) -#define UCC_SLOW_UCCE_TRANS_SET (UCC_SLOW_UCCE_TXE | UCC_SLOW_UCCE_BSY | \ - UCC_SLOW_UCCE_GRA | UCC_SLOW_UCCE_TX | UCC_SLOW_UCCE_RX | \ - UCC_SLOW_UCCE_DCC | UCC_SLOW_UCCE_GLT | UCC_SLOW_UCCE_GLR) -#define UCC_SLOW_UCCE_UART_SET (UCC_SLOW_UCCE_BSY | UCC_SLOW_UCCE_GRA | \ - UCC_SLOW_UCCE_TXB | UCC_SLOW_UCCE_TX | UCC_SLOW_UCCE_RX | \ - UCC_SLOW_UCCE_GLT | UCC_SLOW_UCCE_GLR) -#define UCC_SLOW_UCCE_QMC_SET (UCC_SLOW_UCCE_IQOV | UCC_SLOW_UCCE_GINT | \ - UCC_SLOW_UCCE_GUN | UCC_SLOW_UCCE_GOV) - -#define UCC_SLOW_UCCE_OTHER (UCC_SLOW_UCCE_TXE | UCC_SLOW_UCCE_BSY | \ - UCC_SLOW_UCCE_GRA | UCC_SLOW_UCCE_DCC | UCC_SLOW_UCCE_GLT | \ - UCC_SLOW_UCCE_GLR) - -#define UCC_SLOW_INTR_TX UCC_SLOW_UCCE_TXB -#define UCC_SLOW_INTR_RX (UCC_SLOW_UCCE_RXF | UCC_SLOW_UCCE_RX) -#define UCC_SLOW_INTR (UCC_SLOW_INTR_TX | UCC_SLOW_INTR_RX) +/* UART Slow UCC Event Register (UCCE) */ +#define UCC_UART_UCCE_AB 0x0200 +#define UCC_UART_UCCE_IDLE 0x0100 +#define UCC_UART_UCCE_GRA 0x0080 +#define UCC_UART_UCCE_BRKE 0x0040 +#define UCC_UART_UCCE_BRKS 0x0020 +#define UCC_UART_UCCE_CCR 0x0008 +#define UCC_UART_UCCE_BSY 0x0004 +#define UCC_UART_UCCE_TX 0x0002 +#define UCC_UART_UCCE_RX 0x0001 + +/* HDLC Slow UCC Event Register (UCCE) */ +#define UCC_HDLC_UCCE_GLR 0x1000 +#define UCC_HDLC_UCCE_GLT 0x0800 +#define UCC_HDLC_UCCE_IDLE 0x0100 +#define UCC_HDLC_UCCE_BRKE 0x0040 +#define UCC_HDLC_UCCE_BRKS 0x0020 +#define UCC_HDLC_UCCE_TXE 0x0010 +#define UCC_HDLC_UCCE_RXF 0x0008 +#define UCC_HDLC_UCCE_BSY 0x0004 +#define UCC_HDLC_UCCE_TXB 0x0002 +#define UCC_HDLC_UCCE_RXB 0x0001 + +/* BISYNC Slow UCC Event Register (UCCE) */ +#define UCC_BISYNC_UCCE_GRA 0x0080 +#define UCC_BISYNC_UCCE_TXE 0x0010 +#define UCC_BISYNC_UCCE_RCH 0x0008 +#define UCC_BISYNC_UCCE_BSY 0x0004 +#define UCC_BISYNC_UCCE_TXB 0x0002 +#define UCC_BISYNC_UCCE_RXB 0x0001 + +/* Gigabit Ethernet Fast UCC Event Register (UCCE) */ +#define UCC_GETH_UCCE_MPD 0x80000000 +#define UCC_GETH_UCCE_SCAR 0x40000000 +#define UCC_GETH_UCCE_GRA 0x20000000 +#define UCC_GETH_UCCE_CBPR 0x10000000 +#define UCC_GETH_UCCE_BSY 0x08000000 +#define UCC_GETH_UCCE_RXC 0x04000000 +#define UCC_GETH_UCCE_TXC 0x02000000 +#define UCC_GETH_UCCE_TXE 0x01000000 +#define UCC_GETH_UCCE_TXB7 0x00800000 +#define UCC_GETH_UCCE_TXB6 0x00400000 +#define UCC_GETH_UCCE_TXB5 0x00200000 +#define UCC_GETH_UCCE_TXB4 0x00100000 +#define UCC_GETH_UCCE_TXB3 0x00080000 +#define UCC_GETH_UCCE_TXB2 0x00040000 +#define UCC_GETH_UCCE_TXB1 0x00020000 +#define UCC_GETH_UCCE_TXB0 0x00010000 +#define UCC_GETH_UCCE_RXB7 0x00008000 +#define UCC_GETH_UCCE_RXB6 0x00004000 +#define UCC_GETH_UCCE_RXB5 0x00002000 +#define UCC_GETH_UCCE_RXB4 0x00001000 +#define UCC_GETH_UCCE_RXB3 0x00000800 +#define UCC_GETH_UCCE_RXB2 0x00000400 +#define UCC_GETH_UCCE_RXB1 0x00000200 +#define UCC_GETH_UCCE_RXB0 0x00000100 +#define UCC_GETH_UCCE_RXF7 0x00000080 +#define UCC_GETH_UCCE_RXF6 0x00000040 +#define UCC_GETH_UCCE_RXF5 0x00000020 +#define UCC_GETH_UCCE_RXF4 0x00000010 +#define UCC_GETH_UCCE_RXF3 0x00000008 +#define UCC_GETH_UCCE_RXF2 0x00000004 +#define UCC_GETH_UCCE_RXF1 0x00000002 +#define UCC_GETH_UCCE_RXF0 0x00000001 + +/* UPSMR, when used as a UART */ +#define UCC_UART_UPSMR_FLC 0x8000 +#define UCC_UART_UPSMR_SL 0x4000 +#define UCC_UART_UPSMR_CL_MASK 0x3000 +#define UCC_UART_UPSMR_CL_8 0x3000 +#define UCC_UART_UPSMR_CL_7 0x2000 +#define UCC_UART_UPSMR_CL_6 0x1000 +#define UCC_UART_UPSMR_CL_5 0x0000 +#define UCC_UART_UPSMR_UM_MASK 0x0c00 +#define UCC_UART_UPSMR_UM_NORMAL 0x0000 +#define UCC_UART_UPSMR_UM_MAN_MULTI 0x0400 +#define UCC_UART_UPSMR_UM_AUTO_MULTI 0x0c00 +#define UCC_UART_UPSMR_FRZ 0x0200 +#define UCC_UART_UPSMR_RZS 0x0100 +#define UCC_UART_UPSMR_SYN 0x0080 +#define UCC_UART_UPSMR_DRT 0x0040 +#define UCC_UART_UPSMR_PEN 0x0010 +#define UCC_UART_UPSMR_RPM_MASK 0x000c +#define UCC_UART_UPSMR_RPM_ODD 0x0000 +#define UCC_UART_UPSMR_RPM_LOW 0x0004 +#define UCC_UART_UPSMR_RPM_EVEN 0x0008 +#define UCC_UART_UPSMR_RPM_HIGH 0x000C +#define UCC_UART_UPSMR_TPM_MASK 0x0003 +#define UCC_UART_UPSMR_TPM_ODD 0x0000 +#define UCC_UART_UPSMR_TPM_LOW 0x0001 +#define UCC_UART_UPSMR_TPM_EVEN 0x0002 +#define UCC_UART_UPSMR_TPM_HIGH 0x0003 /* UCC Transmit On Demand Register (UTODR) */ #define UCC_SLOW_TOD 0x8000 #define UCC_FAST_TOD 0x8000 +/* UCC Bus Mode Register masks */ +/* Not to be confused with the Bundle Mode Register */ +#define UCC_BMR_GBL 0x20 +#define UCC_BMR_BO_BE 0x10 +#define UCC_BMR_CETM 0x04 +#define UCC_BMR_DTB 0x02 +#define UCC_BMR_BDB 0x01 + /* Function code masks */ #define FC_GBL 0x20 #define FC_DTB_LCL 0x02 diff --git a/include/asm-powerpc/qe_ic.h b/include/asm-powerpc/qe_ic.h index e386fb7e44b..a779b2c9eaf 100644 --- a/include/asm-powerpc/qe_ic.h +++ b/include/asm-powerpc/qe_ic.h @@ -56,9 +56,75 @@ enum qe_ic_grp_id { QE_IC_GRP_RISCB /* QE interrupt controller RISC group B */ }; -void qe_ic_init(struct device_node *node, unsigned int flags); +void qe_ic_init(struct device_node *node, unsigned int flags, + void (*low_handler)(unsigned int irq, struct irq_desc *desc), + void (*high_handler)(unsigned int irq, struct irq_desc *desc)); void qe_ic_set_highest_priority(unsigned int virq, int high); int qe_ic_set_priority(unsigned int virq, unsigned int priority); int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high); +struct qe_ic; +unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic); +unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic); + +static inline void qe_ic_cascade_low_ipic(unsigned int irq, + struct irq_desc *desc) +{ + struct qe_ic *qe_ic = desc->handler_data; + unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic); + + if (cascade_irq != NO_IRQ) + generic_handle_irq(cascade_irq); +} + +static inline void qe_ic_cascade_high_ipic(unsigned int irq, + struct irq_desc *desc) +{ + struct qe_ic *qe_ic = desc->handler_data; + unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic); + + if (cascade_irq != NO_IRQ) + generic_handle_irq(cascade_irq); +} + +static inline void qe_ic_cascade_low_mpic(unsigned int irq, + struct irq_desc *desc) +{ + struct qe_ic *qe_ic = desc->handler_data; + unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic); + + if (cascade_irq != NO_IRQ) + generic_handle_irq(cascade_irq); + + desc->chip->eoi(irq); +} + +static inline void qe_ic_cascade_high_mpic(unsigned int irq, + struct irq_desc *desc) +{ + struct qe_ic *qe_ic = desc->handler_data; + unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic); + + if (cascade_irq != NO_IRQ) + generic_handle_irq(cascade_irq); + + desc->chip->eoi(irq); +} + +static inline void qe_ic_cascade_muxed_mpic(unsigned int irq, + struct irq_desc *desc) +{ + struct qe_ic *qe_ic = desc->handler_data; + unsigned int cascade_irq; + + cascade_irq = qe_ic_get_high_irq(qe_ic); + if (cascade_irq == NO_IRQ) + cascade_irq = qe_ic_get_low_irq(qe_ic); + + if (cascade_irq != NO_IRQ) + generic_handle_irq(cascade_irq); + + desc->chip->eoi(irq); +} + #endif /* _ASM_POWERPC_QE_IC_H */ diff --git a/include/asm-powerpc/reg.h b/include/asm-powerpc/reg.h index 281011e953e..e775ff1ca41 100644 --- a/include/asm-powerpc/reg.h +++ b/include/asm-powerpc/reg.h @@ -102,12 +102,8 @@ #else /* 32-bit */ /* Default MSR for kernel mode. */ #ifndef MSR_KERNEL /* reg_booke.h also defines this */ -#ifdef CONFIG_APUS_FAST_EXCEPT -#define MSR_KERNEL (MSR_ME|MSR_IP|MSR_RI|MSR_IR|MSR_DR) -#else #define MSR_KERNEL (MSR_ME|MSR_RI|MSR_IR|MSR_DR) #endif -#endif #define MSR_USER (MSR_KERNEL|MSR_PR|MSR_EE) #endif @@ -518,21 +514,47 @@ #define PA6T_MMCR1_ES4 0x0000000000ff0000UL #define PA6T_MMCR1_ES5 0x00000000ff000000UL -#define SPRN_PA6T_SIAR 780 -#define SPRN_PA6T_UPMC0 771 -#define SPRN_PA6T_UPMC1 772 +#define SPRN_PA6T_UPMC0 771 /* User PerfMon Counter 0 */ +#define SPRN_PA6T_UPMC1 772 /* ... */ #define SPRN_PA6T_UPMC2 773 #define SPRN_PA6T_UPMC3 774 #define SPRN_PA6T_UPMC4 775 #define SPRN_PA6T_UPMC5 776 -#define SPRN_PA6T_UMMCR0 779 -#define SPRN_PA6T_UMMCR1 782 -#define SPRN_PA6T_PMC0 787 -#define SPRN_PA6T_PMC1 788 -#define SPRN_PA6T_PMC2 789 -#define SPRN_PA6T_PMC3 790 -#define SPRN_PA6T_PMC4 791 -#define SPRN_PA6T_PMC5 792 +#define SPRN_PA6T_UMMCR0 779 /* User Monitor Mode Control Register 0 */ +#define SPRN_PA6T_SIAR 780 /* Sampled Instruction Address */ +#define SPRN_PA6T_UMMCR1 782 /* User Monitor Mode Control Register 1 */ +#define SPRN_PA6T_SIER 785 /* Sampled Instruction Event Register */ +#define SPRN_PA6T_PMC0 787 +#define SPRN_PA6T_PMC1 788 +#define SPRN_PA6T_PMC2 789 +#define SPRN_PA6T_PMC3 790 +#define SPRN_PA6T_PMC4 791 +#define SPRN_PA6T_PMC5 792 +#define SPRN_PA6T_TSR0 793 /* Timestamp Register 0 */ +#define SPRN_PA6T_TSR1 794 /* Timestamp Register 1 */ +#define SPRN_PA6T_TSR2 799 /* Timestamp Register 2 */ +#define SPRN_PA6T_TSR3 784 /* Timestamp Register 3 */ + +#define SPRN_PA6T_IER 981 /* Icache Error Register */ +#define SPRN_PA6T_DER 982 /* Dcache Error Register */ +#define SPRN_PA6T_BER 862 /* BIU Error Address Register */ +#define SPRN_PA6T_MER 849 /* MMU Error Register */ + +#define SPRN_PA6T_IMA0 880 /* Instruction Match Array 0 */ +#define SPRN_PA6T_IMA1 881 /* ... */ +#define SPRN_PA6T_IMA2 882 +#define SPRN_PA6T_IMA3 883 +#define SPRN_PA6T_IMA4 884 +#define SPRN_PA6T_IMA5 885 +#define SPRN_PA6T_IMA6 886 +#define SPRN_PA6T_IMA7 887 +#define SPRN_PA6T_IMA8 888 +#define SPRN_PA6T_IMA9 889 +#define SPRN_PA6T_BTCR 978 /* Breakpoint and Tagging Control Register */ +#define SPRN_PA6T_IMAAT 979 /* Instruction Match Array Action Table */ +#define SPRN_PA6T_PCCR 1019 /* Power Counter Control Register */ +#define SPRN_PA6T_RPCCR 1021 /* Retire PC Trace Control Register */ + #else /* 32-bit */ #define SPRN_MMCR0 952 /* Monitor Mode Control Register 0 */ diff --git a/include/asm-powerpc/rwsem.h b/include/asm-powerpc/rwsem.h index e929145e1e4..cefc14728cc 100644 --- a/include/asm-powerpc/rwsem.h +++ b/include/asm-powerpc/rwsem.h @@ -1,6 +1,10 @@ #ifndef _ASM_POWERPC_RWSEM_H #define _ASM_POWERPC_RWSEM_H +#ifndef _LINUX_RWSEM_H +#error "Please don't include <asm/rwsem.h> directly, use <linux/rwsem.h> instead." +#endif + #ifdef __KERNEL__ /* diff --git a/include/asm-powerpc/smp.h b/include/asm-powerpc/smp.h index d037f50580e..19102bfc14c 100644 --- a/include/asm-powerpc/smp.h +++ b/include/asm-powerpc/smp.h @@ -45,7 +45,7 @@ void generic_mach_cpu_die(void); #endif #ifdef CONFIG_PPC64 -#define raw_smp_processor_id() (get_paca()->paca_index) +#define raw_smp_processor_id() (local_paca->paca_index) #define hard_smp_processor_id() (get_paca()->hw_cpu_id) #else /* 32-bit */ diff --git a/include/asm-powerpc/spu.h b/include/asm-powerpc/spu.h index 5bde3980bf4..b1accce77bb 100644 --- a/include/asm-powerpc/spu.h +++ b/include/asm-powerpc/spu.h @@ -238,19 +238,14 @@ extern long spu_sys_callback(struct spu_syscall_block *s); /* syscalls implemented in spufs */ struct file; -extern struct spufs_calls { - asmlinkage long (*create_thread)(const char __user *name, +struct spufs_calls { + long (*create_thread)(const char __user *name, unsigned int flags, mode_t mode, struct file *neighbor); - asmlinkage long (*spu_run)(struct file *filp, __u32 __user *unpc, + long (*spu_run)(struct file *filp, __u32 __user *unpc, __u32 __user *ustatus); - struct module *owner; -} spufs_calls; - -/* coredump calls implemented in spufs */ -struct spu_coredump_calls { - asmlinkage int (*arch_notes_size)(void); - asmlinkage void (*arch_write_notes)(struct file *file); + int (*coredump_extra_notes_size)(void); + int (*coredump_extra_notes_write)(struct file *file, loff_t *foffset); struct module *owner; }; @@ -274,21 +269,8 @@ struct spu_coredump_calls { #define SPU_CREATE_FLAG_ALL 0x003f /* mask of all valid flags */ -#ifdef CONFIG_SPU_FS_MODULE int register_spu_syscalls(struct spufs_calls *calls); void unregister_spu_syscalls(struct spufs_calls *calls); -#else -static inline int register_spu_syscalls(struct spufs_calls *calls) -{ - return 0; -} -static inline void unregister_spu_syscalls(struct spufs_calls *calls) -{ -} -#endif /* MODULE */ - -int register_arch_coredump_calls(struct spu_coredump_calls *calls); -void unregister_arch_coredump_calls(struct spu_coredump_calls *calls); int spu_add_sysdev_attr(struct sysdev_attribute *attr); void spu_remove_sysdev_attr(struct sysdev_attribute *attr); diff --git a/include/asm-powerpc/system.h b/include/asm-powerpc/system.h index 41520b7a7b7..d10e99bf500 100644 --- a/include/asm-powerpc/system.h +++ b/include/asm-powerpc/system.h @@ -189,6 +189,9 @@ extern int mem_init_done; /* set on boot once kmalloc can be called */ extern unsigned long memory_limit; extern unsigned long klimit; +extern void *alloc_maybe_bootmem(size_t size, gfp_t mask); +extern void *zalloc_maybe_bootmem(size_t size, gfp_t mask); + extern int powersave_nap; /* set if nap mode can be used in idle loop */ /* diff --git a/include/asm-powerpc/time.h b/include/asm-powerpc/time.h index c104c15c662..f05895522f7 100644 --- a/include/asm-powerpc/time.h +++ b/include/asm-powerpc/time.h @@ -179,7 +179,7 @@ static inline unsigned int get_dec(void) static inline void set_dec(int val) { #if defined(CONFIG_40x) - return; /* Have to let it auto-reload */ + mtspr(SPRN_PIT, val); #elif defined(CONFIG_8xx_CPU6) set_dec_cpu6(val); #else @@ -245,6 +245,7 @@ extern void snapshot_timebases(void); #define snapshot_timebases() do { } while (0) #endif +extern void secondary_cpu_time_init(void); extern void iSeries_time_init_early(void); #endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/tlb.h b/include/asm-powerpc/tlb.h index 66714042e43..e20ff7541f3 100644 --- a/include/asm-powerpc/tlb.h +++ b/include/asm-powerpc/tlb.h @@ -23,6 +23,8 @@ #include <asm/mmu.h> #endif +#include <linux/pagemap.h> + struct mmu_gather; #define tlb_start_vma(tlb, vma) do { } while (0) diff --git a/include/asm-powerpc/tlbflush.h b/include/asm-powerpc/tlbflush.h index 99a0439baa5..a022f806bb2 100644 --- a/include/asm-powerpc/tlbflush.h +++ b/include/asm-powerpc/tlbflush.h @@ -97,6 +97,7 @@ struct ppc64_tlb_batch { real_pte_t pte[PPC64_TLB_BATCH_NR]; unsigned long vaddr[PPC64_TLB_BATCH_NR]; unsigned int psize; + int ssize; }; DECLARE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch); @@ -127,7 +128,7 @@ static inline void arch_leave_lazy_mmu_mode(void) extern void flush_hash_page(unsigned long va, real_pte_t pte, int psize, - int local); + int ssize, int local); extern void flush_hash_range(unsigned long number, int local); diff --git a/include/asm-powerpc/types.h b/include/asm-powerpc/types.h index 3b363757a2b..a584341c87e 100644 --- a/include/asm-powerpc/types.h +++ b/include/asm-powerpc/types.h @@ -48,7 +48,7 @@ typedef unsigned long long __u64; typedef struct { __u32 u[4]; -} __attribute((aligned(16))) __vector128; +} __attribute__((aligned(16))) __vector128; #endif /* __ASSEMBLY__ */ diff --git a/include/asm-powerpc/ucc.h b/include/asm-powerpc/ucc.h index afe3076bdc0..46b09ba6bea 100644 --- a/include/asm-powerpc/ucc.h +++ b/include/asm-powerpc/ucc.h @@ -25,58 +25,38 @@ /* Slow or fast type for UCCs. */ enum ucc_speed_type { - UCC_SPEED_TYPE_FAST, UCC_SPEED_TYPE_SLOW -}; - -/* Initial UCCs Parameter RAM address relative to: MEM_MAP_BASE (IMMR). -*/ -enum ucc_pram_initial_offset { - UCC_PRAM_OFFSET_UCC1 = 0x8400, - UCC_PRAM_OFFSET_UCC2 = 0x8500, - UCC_PRAM_OFFSET_UCC3 = 0x8600, - UCC_PRAM_OFFSET_UCC4 = 0x9000, - UCC_PRAM_OFFSET_UCC5 = 0x8000, - UCC_PRAM_OFFSET_UCC6 = 0x8100, - UCC_PRAM_OFFSET_UCC7 = 0x8200, - UCC_PRAM_OFFSET_UCC8 = 0x8300 + UCC_SPEED_TYPE_FAST = UCC_GUEMR_MODE_FAST_RX | UCC_GUEMR_MODE_FAST_TX, + UCC_SPEED_TYPE_SLOW = UCC_GUEMR_MODE_SLOW_RX | UCC_GUEMR_MODE_SLOW_TX }; /* ucc_set_type * Sets UCC to slow or fast mode. * * ucc_num - (In) number of UCC (0-7). - * regs - (In) pointer to registers base for the UCC. * speed - (In) slow or fast mode for UCC. */ -int ucc_set_type(int ucc_num, struct ucc_common *regs, - enum ucc_speed_type speed); - -/* ucc_init_guemr - * Init the Guemr register. - * - * regs - (In) pointer to registers base for the UCC. - */ -int ucc_init_guemr(struct ucc_common *regs); +int ucc_set_type(unsigned int ucc_num, enum ucc_speed_type speed); -int ucc_set_qe_mux_mii_mng(int ucc_num); +int ucc_set_qe_mux_mii_mng(unsigned int ucc_num); -int ucc_set_qe_mux_rxtx(int ucc_num, enum qe_clock clock, enum comm_dir mode); +int ucc_set_qe_mux_rxtx(unsigned int ucc_num, enum qe_clock clock, + enum comm_dir mode); -int ucc_mux_set_grant_tsa_bkpt(int ucc_num, int set, u32 mask); +int ucc_mux_set_grant_tsa_bkpt(unsigned int ucc_num, int set, u32 mask); /* QE MUX clock routing for UCC */ -static inline int ucc_set_qe_mux_grant(int ucc_num, int set) +static inline int ucc_set_qe_mux_grant(unsigned int ucc_num, int set) { return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_GRANT); } -static inline int ucc_set_qe_mux_tsa(int ucc_num, int set) +static inline int ucc_set_qe_mux_tsa(unsigned int ucc_num, int set) { return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_TSA); } -static inline int ucc_set_qe_mux_bkpt(int ucc_num, int set) +static inline int ucc_set_qe_mux_bkpt(unsigned int ucc_num, int set) { return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_BKPT); } diff --git a/include/asm-powerpc/ucc_slow.h b/include/asm-powerpc/ucc_slow.h index fdaac9d762b..0980e6ad335 100644 --- a/include/asm-powerpc/ucc_slow.h +++ b/include/asm-powerpc/ucc_slow.h @@ -148,9 +148,10 @@ enum ucc_slow_diag_mode { struct ucc_slow_info { int ucc_num; + int protocol; /* QE_CR_PROTOCOL_xxx */ enum qe_clock rx_clock; enum qe_clock tx_clock; - u32 regs; + phys_addr_t regs; int irq; u16 uccm_mask; int data_mem_part; @@ -186,7 +187,7 @@ struct ucc_slow_info { struct ucc_slow_private { struct ucc_slow_info *us_info; - struct ucc_slow *us_regs; /* a pointer to memory map of UCC regs */ + struct ucc_slow __iomem *us_regs; /* Ptr to memory map of UCC regs */ struct ucc_slow_pram *us_pram; /* a pointer to the parameter RAM */ u32 us_pram_offset; int enabled_tx; /* Whether channel is enabled for Tx (ENT) */ @@ -277,12 +278,12 @@ void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs); */ void ucc_slow_stop_tx(struct ucc_slow_private * uccs); -/* ucc_slow_restart_x +/* ucc_slow_restart_tx * Restarts transmitting on a specified slow UCC. * * uccs - (In) pointer to the slow UCC structure. */ -void ucc_slow_restart_x(struct ucc_slow_private * uccs); +void ucc_slow_restart_tx(struct ucc_slow_private *uccs); u32 ucc_slow_get_qe_cr_subblock(int uccs_num); diff --git a/include/asm-powerpc/udbg.h b/include/asm-powerpc/udbg.h index ce9d82fb7b6..a9e0b0ebcb0 100644 --- a/include/asm-powerpc/udbg.h +++ b/include/asm-powerpc/udbg.h @@ -48,6 +48,7 @@ extern void __init udbg_init_rtas_console(void); extern void __init udbg_init_debug_beat(void); extern void __init udbg_init_btext(void); extern void __init udbg_init_44x_as1(void); +extern void __init udbg_init_cpm(void); #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_UDBG_H */ diff --git a/include/asm-powerpc/vio.h b/include/asm-powerpc/vio.h index 3a0975e2ada..9204c15839c 100644 --- a/include/asm-powerpc/vio.h +++ b/include/asm-powerpc/vio.h @@ -53,18 +53,12 @@ struct vio_dev { }; struct vio_driver { - struct list_head node; const struct vio_device_id *id_table; int (*probe)(struct vio_dev *dev, const struct vio_device_id *id); int (*remove)(struct vio_dev *dev); - void (*shutdown)(struct vio_dev *dev); - unsigned long driver_data; struct device_driver driver; }; -extern struct dma_mapping_ops vio_dma_ops; -extern struct bus_type vio_bus_type; - extern int vio_register_driver(struct vio_driver *drv); extern void vio_unregister_driver(struct vio_driver *drv); diff --git a/include/asm-powerpc/xilinx_intc.h b/include/asm-powerpc/xilinx_intc.h new file mode 100644 index 00000000000..343612f8fec --- /dev/null +++ b/include/asm-powerpc/xilinx_intc.h @@ -0,0 +1,20 @@ +/* + * Xilinx intc external definitions + * + * Copyright 2007 Secret Lab Technologies Ltd. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#ifndef _ASM_POWERPC_XILINX_INTC_H +#define _ASM_POWERPC_XILINX_INTC_H + +#ifdef __KERNEL__ + +extern void __init xilinx_intc_init_tree(void); +extern unsigned int xilinx_intc_get_irq(void); + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_XILINX_INTC_H */ |