diff options
Diffstat (limited to 'include/asm-parisc/superio.h')
| -rw-r--r-- | include/asm-parisc/superio.h | 85 |
1 files changed, 85 insertions, 0 deletions
diff --git a/include/asm-parisc/superio.h b/include/asm-parisc/superio.h new file mode 100644 index 00000000000..6598acb4d46 --- /dev/null +++ b/include/asm-parisc/superio.h @@ -0,0 +1,85 @@ +#ifndef _PARISC_SUPERIO_H +#define _PARISC_SUPERIO_H + +#define IC_PIC1 0x20 /* PCI I/O address of master 8259 */ +#define IC_PIC2 0xA0 /* PCI I/O address of slave */ + +/* Config Space Offsets to configuration and base address registers */ +#define SIO_CR 0x5A /* Configuration Register */ +#define SIO_ACPIBAR 0x88 /* ACPI BAR */ +#define SIO_FDCBAR 0x90 /* Floppy Disk Controller BAR */ +#define SIO_SP1BAR 0x94 /* Serial 1 BAR */ +#define SIO_SP2BAR 0x98 /* Serial 2 BAR */ +#define SIO_PPBAR 0x9C /* Parallel BAR */ + +#define TRIGGER_1 0x67 /* Edge/level trigger register 1 */ +#define TRIGGER_2 0x68 /* Edge/level trigger register 2 */ + +/* Interrupt Routing Control registers */ +#define CFG_IR_SER 0x69 /* Serial 1 [0:3] and Serial 2 [4:7] */ +#define CFG_IR_PFD 0x6a /* Parallel [0:3] and Floppy [4:7] */ +#define CFG_IR_IDE 0x6b /* IDE1 [0:3] and IDE2 [4:7] */ +#define CFG_IR_INTAB 0x6c /* PCI INTA [0:3] and INT B [4:7] */ +#define CFG_IR_INTCD 0x6d /* PCI INTC [0:3] and INT D [4:7] */ +#define CFG_IR_PS2 0x6e /* PS/2 KBINT [0:3] and Mouse [4:7] */ +#define CFG_IR_FXBUS 0x6f /* FXIRQ[0] [0:3] and FXIRQ[1] [4:7] */ +#define CFG_IR_USB 0x70 /* FXIRQ[2] [0:3] and USB [4:7] */ +#define CFG_IR_ACPI 0x71 /* ACPI SCI [0:3] and reserved [4:7] */ + +#define CFG_IR_LOW CFG_IR_SER /* Lowest interrupt routing reg */ +#define CFG_IR_HIGH CFG_IR_ACPI /* Highest interrupt routing reg */ + +/* 8259 operational control words */ +#define OCW2_EOI 0x20 /* Non-specific EOI */ +#define OCW2_SEOI 0x60 /* Specific EOI */ +#define OCW3_IIR 0x0A /* Read request register */ +#define OCW3_ISR 0x0B /* Read service register */ +#define OCW3_POLL 0x0C /* Poll the PIC for an interrupt vector */ + +/* Interrupt lines. Only PIC1 is used */ +#define USB_IRQ 1 /* USB */ +#define SP1_IRQ 3 /* Serial port 1 */ +#define SP2_IRQ 4 /* Serial port 2 */ +#define PAR_IRQ 5 /* Parallel port */ +#define FDC_IRQ 6 /* Floppy controller */ +#define IDE_IRQ 7 /* IDE (pri+sec) */ + +/* ACPI registers */ +#define USB_REG_CR 0x1f /* USB Regulator Control Register */ + +#define SUPERIO_NIRQS 8 + +struct superio_device { + u32 fdc_base; + u32 sp1_base; + u32 sp2_base; + u32 pp_base; + u32 acpi_base; + int suckyio_irq_enabled; + struct pci_dev *lio_pdev; /* pci device for legacy IO (fn 1) */ + struct pci_dev *usb_pdev; /* pci device for USB (fn 2) */ +}; + +/* + * Does NS make a 87415 based plug in PCI card? If so, because of this + * macro we currently don't support it being plugged into a machine + * that contains a SuperIO chip AND has CONFIG_SUPERIO enabled. + * + * This could be fixed by checking to see if function 1 exists, and + * if it is SuperIO Legacy IO; but really now, is this combination + * going to EVER happen? + */ + +#define SUPERIO_IDE_FN 0 /* Function number of IDE controller */ +#define SUPERIO_LIO_FN 1 /* Function number of Legacy IO controller */ +#define SUPERIO_USB_FN 2 /* Function number of USB controller */ + +#define is_superio_device(x) \ + (((x)->vendor == PCI_VENDOR_ID_NS) && \ + ( ((x)->device == PCI_DEVICE_ID_NS_87415) \ + || ((x)->device == PCI_DEVICE_ID_NS_87560_LIO) \ + || ((x)->device == PCI_DEVICE_ID_NS_87560_USB) ) ) + +extern int superio_fixup_irq(struct pci_dev *pcidev); /* called by iosapic */ + +#endif /* _PARISC_SUPERIO_H */ |