diff options
Diffstat (limited to 'include/asm-mips/sibyte/sb1250_regs.h')
| -rw-r--r-- | include/asm-mips/sibyte/sb1250_regs.h | 35 |
1 files changed, 27 insertions, 8 deletions
diff --git a/include/asm-mips/sibyte/sb1250_regs.h b/include/asm-mips/sibyte/sb1250_regs.h index 9db80cd13a7..bab3a4580a3 100644 --- a/include/asm-mips/sibyte/sb1250_regs.h +++ b/include/asm-mips/sibyte/sb1250_regs.h @@ -8,8 +8,6 @@ * * SB1250 specification level: 01/02/2002 * - * Author: Mitch Lichtenberg - * ********************************************************************* * * Copyright 2000,2001,2002,2003 @@ -61,6 +59,8 @@ * XXX: can't remove MC base 0 if 112x, since it's used by other macros, * since there is one reg there (but it could get its addr/offset constant). */ + +#if SIBYTE_HDR_FEATURE_1250_112x /* This MC only on 1250 & 112x */ #define A_MC_BASE_0 0x0010051000 #define A_MC_BASE_1 0x0010052000 #define MC_REGISTER_SPACING 0x1000 @@ -101,10 +101,14 @@ #define R_MC_TEST_ECC 0x0000000420 #define R_MC_MCLK_CFG 0x0000000500 +#endif /* 1250 & 112x */ + /* ********************************************************************* * L2 Cache Control Registers ********************************************************************* */ +#if SIBYTE_HDR_FEATURE_1250_112x /* This L2C only on 1250/112x */ + #define A_L2_READ_TAG 0x0010040018 #define A_L2_ECC_TAG 0x0010040038 #if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) @@ -125,13 +129,16 @@ #define A_L2_READ_ADDRESS A_L2_READ_TAG #define A_L2_EEC_ADDRESS A_L2_ECC_TAG +#endif /* ********************************************************************* * PCI Interface Registers ********************************************************************* */ +#if SIBYTE_HDR_FEATURE_1250_112x /* This PCI/HT only on 1250/112x */ #define A_PCI_TYPE00_HEADER 0x00DE000000 #define A_PCI_TYPE01_HEADER 0x00DE000800 +#endif /* ********************************************************************* @@ -264,15 +271,15 @@ ********************************************************************* */ +#if SIBYTE_HDR_FEATURE_1250_112x /* This MC only on 1250 & 112x */ #define R_DUART_NUM_PORTS 2 #define A_DUART 0x0010060000 -#define A_DUART_REG(r) - #define DUART_CHANREG_SPACING 0x100 #define A_DUART_CHANREG(chan,reg) (A_DUART + DUART_CHANREG_SPACING*(chan) + (reg)) #define R_DUART_CHANREG(chan,reg) (DUART_CHANREG_SPACING*(chan) + (reg)) +#endif /* 1250 & 112x */ #define R_DUART_MODE_REG_1 0x100 #define R_DUART_MODE_REG_2 0x110 @@ -307,11 +314,13 @@ #define DUART_IMRISR_SPACING 0x20 +#if SIBYTE_HDR_FEATURE_1250_112x /* This MC only on 1250 & 112x */ #define R_DUART_IMRREG(chan) (R_DUART_IMR_A + (chan)*DUART_IMRISR_SPACING) #define R_DUART_ISRREG(chan) (R_DUART_ISR_A + (chan)*DUART_IMRISR_SPACING) #define A_DUART_IMRREG(chan) (A_DUART + R_DUART_IMRREG(chan)) #define A_DUART_ISRREG(chan) (A_DUART + R_DUART_ISRREG(chan)) +#endif /* 1250 & 112x */ @@ -368,6 +377,8 @@ ********************************************************************* */ +#if SIBYTE_HDR_FEATURE_1250_112x /* sync serial only on 1250/112x */ + #define A_SER_BASE_0 0x0010060400 #define A_SER_BASE_1 0x0010060800 #define SER_SPACING 0x400 @@ -457,6 +468,8 @@ #define R_SER_RMON_RX_ERRORS 0x000001F0 #define R_SER_RMON_RX_BADADDR 0x000001F8 +#endif /* 1250/112x */ + /* ********************************************************************* * Generic Bus Registers ********************************************************************* */ @@ -634,12 +647,13 @@ #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) #define A_SCD_SCRATCH 0x0010020C10 +#endif /* 1250 PASS2 || 112x PASS1 */ +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) #define A_SCD_ZBBUS_CYCLE_COUNT 0x0010030000 #define A_SCD_ZBBUS_CYCLE_CP0 0x0010020C00 #define A_SCD_ZBBUS_CYCLE_CP1 0x0010020C08 -#endif /* 1250 PASS2 || 112x PASS1 */ - +#endif /* ********************************************************************* * System Control Registers @@ -667,15 +681,16 @@ #define A_ADDR_TRAP_CFG_1 0x0010020448 #define A_ADDR_TRAP_CFG_2 0x0010020450 #define A_ADDR_TRAP_CFG_3 0x0010020458 -#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) #define A_ADDR_TRAP_REG_DEBUG 0x0010020460 -#endif /* 1250 PASS2 || 112x PASS1 */ +#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ /* ********************************************************************* * System Interrupt Mapper Registers ********************************************************************* */ +#if SIBYTE_HDR_FEATURE_1250_112x #define A_IMR_CPU0_BASE 0x0010020000 #define A_IMR_CPU1_BASE 0x0010022000 #define IMR_REGISTER_SPACING 0x2000 @@ -700,6 +715,7 @@ #define R_IMR_INTERRUPT_STATUS_COUNT 7 #define R_IMR_INTERRUPT_MAP_BASE 0x0200 #define R_IMR_INTERRUPT_MAP_COUNT 64 +#endif /* 1250/112x */ /* ********************************************************************* * System Performance Counter Registers @@ -718,6 +734,7 @@ #define A_SCD_BUS_ERR_STATUS 0x0010020880 #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) #define A_SCD_BUS_ERR_STATUS_DEBUG 0x00100208D0 +#define A_BUS_ERR_STATUS_DEBUG 0x00100208D0 #endif /* 1250 PASS2 || 112x PASS1 */ #define A_BUS_ERR_DATA_0 0x00100208A0 #define A_BUS_ERR_DATA_1 0x00100208A8 @@ -798,6 +815,7 @@ * Physical Address Map ********************************************************************* */ +#if SIBYTE_HDR_FEATURE_1250_112x #define A_PHYS_MEMORY_0 _SB_MAKE64(0x0000000000) #define A_PHYS_MEMORY_SIZE _SB_MAKE64((256*1024*1024)) #define A_PHYS_SYSTEM_CTL _SB_MAKE64(0x0010000000) @@ -831,6 +849,7 @@ #define A_PHYS_L2CACHE_WAY1 _SB_MAKE64(0x00D01A0000) #define A_PHYS_L2CACHE_WAY2 _SB_MAKE64(0x00D01C0000) #define A_PHYS_L2CACHE_WAY3 _SB_MAKE64(0x00D01E0000) +#endif #endif |