diff options
Diffstat (limited to 'include/asm-mips/sgi/ioc.h')
| -rw-r--r-- | include/asm-mips/sgi/ioc.h | 200 |
1 files changed, 200 insertions, 0 deletions
diff --git a/include/asm-mips/sgi/ioc.h b/include/asm-mips/sgi/ioc.h new file mode 100644 index 00000000000..169187f53fb --- /dev/null +++ b/include/asm-mips/sgi/ioc.h @@ -0,0 +1,200 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * ioc.h: Definitions for SGI I/O Controller + * + * Copyright (C) 1996 David S. Miller + * Copyright (C) 1997, 1998, 1999, 2000 Ralf Baechle + * Copyright (C) 2001, 2003 Ladislav Michl + */ + +#ifndef _SGI_IOC_H +#define _SGI_IOC_H + +#include <linux/types.h> +#include <asm/sgi/pi1.h> + +/* + * All registers are 8-bit wide alligned on 32-bit boundary. Bad things + * happen if you try word access them. You have been warned. + */ + +struct sgioc_uart_regs { + u8 _ctrl1[3]; + volatile u8 ctrl1; + u8 _data1[3]; + volatile u8 data1; + u8 _ctrl2[3]; + volatile u8 ctrl2; + u8 _data2[3]; + volatile u8 data2; +}; + +struct sgioc_keyb_regs { + u8 _data[3]; + volatile u8 data; + u8 _command[3]; + volatile u8 command; +}; + +struct sgint_regs { + u8 _istat0[3]; + volatile u8 istat0; /* Interrupt status zero */ +#define SGINT_ISTAT0_FFULL 0x01 +#define SGINT_ISTAT0_SCSI0 0x02 +#define SGINT_ISTAT0_SCSI1 0x04 +#define SGINT_ISTAT0_ENET 0x08 +#define SGINT_ISTAT0_GFXDMA 0x10 +#define SGINT_ISTAT0_PPORT 0x20 +#define SGINT_ISTAT0_HPC2 0x40 +#define SGINT_ISTAT0_LIO2 0x80 + u8 _imask0[3]; + volatile u8 imask0; /* Interrupt mask zero */ + u8 _istat1[3]; + volatile u8 istat1; /* Interrupt status one */ +#define SGINT_ISTAT1_ISDNI 0x01 +#define SGINT_ISTAT1_PWR 0x02 +#define SGINT_ISTAT1_ISDNH 0x04 +#define SGINT_ISTAT1_LIO3 0x08 +#define SGINT_ISTAT1_HPC3 0x10 +#define SGINT_ISTAT1_AFAIL 0x20 +#define SGINT_ISTAT1_VIDEO 0x40 +#define SGINT_ISTAT1_GIO2 0x80 + u8 _imask1[3]; + volatile u8 imask1; /* Interrupt mask one */ + u8 _vmeistat[3]; + volatile u8 vmeistat; /* VME interrupt status */ + u8 _cmeimask0[3]; + volatile u8 cmeimask0; /* VME interrupt mask zero */ + u8 _cmeimask1[3]; + volatile u8 cmeimask1; /* VME interrupt mask one */ + u8 _cmepol[3]; + volatile u8 cmepol; /* VME polarity */ + u8 _tclear[3]; + volatile u8 tclear; + u8 _errstat[3]; + volatile u8 errstat; /* Error status reg, reserved on INT2 */ + u32 _unused0[2]; + u8 _tcnt0[3]; + volatile u8 tcnt0; /* counter 0 */ + u8 _tcnt1[3]; + volatile u8 tcnt1; /* counter 1 */ + u8 _tcnt2[3]; + volatile u8 tcnt2; /* counter 2 */ + u8 _tcword[3]; + volatile u8 tcword; /* control word */ +#define SGINT_TCWORD_BCD 0x01 /* Use BCD mode for counters */ +#define SGINT_TCWORD_MMASK 0x0e /* Mode bitmask. */ +#define SGINT_TCWORD_MITC 0x00 /* IRQ on terminal count (doesn't work) */ +#define SGINT_TCWORD_MOS 0x02 /* One-shot IRQ mode. */ +#define SGINT_TCWORD_MRGEN 0x04 /* Normal rate generation */ +#define SGINT_TCWORD_MSWGEN 0x06 /* Square wave generator mode */ +#define SGINT_TCWORD_MSWST 0x08 /* Software strobe */ +#define SGINT_TCWORD_MHWST 0x0a /* Hardware strobe */ +#define SGINT_TCWORD_CMASK 0x30 /* Command mask */ +#define SGINT_TCWORD_CLAT 0x00 /* Latch command */ +#define SGINT_TCWORD_CLSB 0x10 /* LSB read/write */ +#define SGINT_TCWORD_CMSB 0x20 /* MSB read/write */ +#define SGINT_TCWORD_CALL 0x30 /* Full counter read/write */ +#define SGINT_TCWORD_CNT0 0x00 /* Select counter zero */ +#define SGINT_TCWORD_CNT1 0x40 /* Select counter one */ +#define SGINT_TCWORD_CNT2 0x80 /* Select counter two */ +#define SGINT_TCWORD_CRBCK 0xc0 /* Readback command */ +}; + +/* + * The timer is the good old 8254. Unlike in PCs it's clocked at exactly 1MHz + */ +#define SGINT_TIMER_CLOCK 1000000 + +/* + * This is the constant we're using for calibrating the counter. + */ +#define SGINT_TCSAMP_COUNTER ((SGINT_TIMER_CLOCK / HZ) + 255) + +/* We need software copies of these because they are write only. */ +extern u8 sgi_ioc_reset, sgi_ioc_write; + +struct sgioc_regs { + struct pi1_regs pport; + u32 _unused0[2]; + struct sgioc_uart_regs uart; + struct sgioc_keyb_regs kbdmouse; + u8 _gcsel[3]; + volatile u8 gcsel; + u8 _genctrl[3]; + volatile u8 genctrl; + u8 _panel[3]; + volatile u8 panel; +#define SGIOC_PANEL_POWERON 0x01 +#define SGIOC_PANEL_POWERINTR 0x02 +#define SGIOC_PANEL_VOLDNINTR 0x10 +#define SGIOC_PANEL_VOLDNHOLD 0x20 +#define SGIOC_PANEL_VOLUPINTR 0x40 +#define SGIOC_PANEL_VOLUPHOLD 0x80 + u32 _unused1; + u8 _sysid[3]; + volatile u8 sysid; +#define SGIOC_SYSID_FULLHOUSE 0x01 +#define SGIOC_SYSID_BOARDREV(x) ((x & 0xe0) > 5) +#define SGIOC_SYSID_CHIPREV(x) ((x & 0x1e) > 1) + u32 _unused2; + u8 _read[3]; + volatile u8 read; + u32 _unused3; + u8 _dmasel[3]; + volatile u8 dmasel; +#define SGIOC_DMASEL_SCLK10MHZ 0x00 /* use 10MHZ serial clock */ +#define SGIOC_DMASEL_ISDNB 0x01 /* enable isdn B */ +#define SGIOC_DMASEL_ISDNA 0x02 /* enable isdn A */ +#define SGIOC_DMASEL_PPORT 0x04 /* use parallel DMA */ +#define SGIOC_DMASEL_SCLK667MHZ 0x10 /* use 6.67MHZ serial clock */ +#define SGIOC_DMASEL_SCLKEXT 0x20 /* use external serial clock */ + u32 _unused4; + u8 _reset[3]; + volatile u8 reset; +#define SGIOC_RESET_PPORT 0x01 /* 0=parport reset, 1=nornal */ +#define SGIOC_RESET_KBDMOUSE 0x02 /* 0=kbdmouse reset, 1=normal */ +#define SGIOC_RESET_EISA 0x04 /* 0=eisa reset, 1=normal */ +#define SGIOC_RESET_ISDN 0x08 /* 0=isdn reset, 1=normal */ +#define SGIOC_RESET_LC0OFF 0x10 /* guiness: turn led off (red, else green) */ +#define SGIOC_RESET_LC1OFF 0x20 /* guiness: turn led off (green, else amber) */ + u32 _unused5; + u8 _write[3]; + volatile u8 write; +#define SGIOC_WRITE_NTHRESH 0x01 /* use 4.5db threshhold */ +#define SGIOC_WRITE_TPSPEED 0x02 /* use 100ohm TP speed */ +#define SGIOC_WRITE_EPSEL 0x04 /* force cable mode: 1=AUI 0=TP */ +#define SGIOC_WRITE_EASEL 0x08 /* 1=autoselect 0=manual cable selection */ +#define SGIOC_WRITE_U1AMODE 0x10 /* 1=PC 0=MAC UART mode */ +#define SGIOC_WRITE_U0AMODE 0x20 /* 1=PC 0=MAC UART mode */ +#define SGIOC_WRITE_MLO 0x40 /* 1=4.75V 0=+5V */ +#define SGIOC_WRITE_MHI 0x80 /* 1=5.25V 0=+5V */ + u32 _unused6; + struct sgint_regs int3; + u32 _unused7[16]; + volatile u32 extio; /* FullHouse only */ +#define EXTIO_S0_IRQ_3 0x8000 /* S0: vid.vsync */ +#define EXTIO_S0_IRQ_2 0x4000 /* S0: gfx.fifofull */ +#define EXTIO_S0_IRQ_1 0x2000 /* S0: gfx.int */ +#define EXTIO_S0_RETRACE 0x1000 +#define EXTIO_SG_IRQ_3 0x0800 /* SG: vid.vsync */ +#define EXTIO_SG_IRQ_2 0x0400 /* SG: gfx.fifofull */ +#define EXTIO_SG_IRQ_1 0x0200 /* SG: gfx.int */ +#define EXTIO_SG_RETRACE 0x0100 +#define EXTIO_GIO_33MHZ 0x0080 +#define EXTIO_EISA_BUSERR 0x0040 +#define EXTIO_MC_BUSERR 0x0020 +#define EXTIO_HPC3_BUSERR 0x0010 +#define EXTIO_S0_STAT_1 0x0008 +#define EXTIO_S0_STAT_0 0x0004 +#define EXTIO_SG_STAT_1 0x0002 +#define EXTIO_SG_STAT_0 0x0001 +}; + +extern struct sgioc_regs *sgioc; +extern struct sgint_regs *sgint; + +#endif |