diff options
Diffstat (limited to 'include/asm-mips/serial.h')
| -rw-r--r-- | include/asm-mips/serial.h | 444 |
1 files changed, 444 insertions, 0 deletions
diff --git a/include/asm-mips/serial.h b/include/asm-mips/serial.h new file mode 100644 index 00000000000..8a70ff58f76 --- /dev/null +++ b/include/asm-mips/serial.h @@ -0,0 +1,444 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1999 by Ralf Baechle + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + */ +#ifndef _ASM_SERIAL_H +#define _ASM_SERIAL_H + +#include <linux/config.h> + +/* + * This assumes you have a 1.8432 MHz clock for your UART. + * + * It'd be nice if someone built a serial card with a 24.576 MHz + * clock, since the 16550A is capable of handling a top speed of 1.5 + * megabits/second; but this requires the faster clock. + */ +#define BASE_BAUD (1843200 / 16) + +/* Standard COM flags (except for COM4, because of the 8514 problem) */ +#ifdef CONFIG_SERIAL_DETECT_IRQ +#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ) +#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ) +#else +#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) +#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF +#endif + +#ifdef CONFIG_SERIAL_MANY_PORTS +#define FOURPORT_FLAGS ASYNC_FOURPORT +#define ACCENT_FLAGS 0 +#define BOCA_FLAGS 0 +#define HUB6_FLAGS 0 +#define RS_TABLE_SIZE 64 +#else +#define RS_TABLE_SIZE +#endif + +/* + * The following define the access methods for the HUB6 card. All + * access is through two ports for all 24 possible chips. The card is + * selected through the high 2 bits, the port on that card with the + * "middle" 3 bits, and the register on that port with the bottom + * 3 bits. + * + * While the access port and interrupt is configurable, the default + * port locations are 0x302 for the port control register, and 0x303 + * for the data read/write register. Normally, the interrupt is at irq3 + * but can be anything from 3 to 7 inclusive. Note that using 3 will + * require disabling com2. + */ + +#define C_P(card,port) (((card)<<6|(port)<<3) + 1) + +#ifdef CONFIG_MACH_JAZZ +#include <asm/jazz.h> + +#ifndef CONFIG_OLIVETTI_M700 + /* Some Jazz machines seem to have an 8MHz crystal clock but I don't know + exactly which ones ... XXX */ +#define JAZZ_BASE_BAUD ( 8000000 / 16 ) /* ( 3072000 / 16) */ +#else +/* but the M700 isn't such a strange beast */ +#define JAZZ_BASE_BAUD BASE_BAUD +#endif + +#define _JAZZ_SERIAL_INIT(int, base) \ + { .baud_base = JAZZ_BASE_BAUD, .irq = int, .flags = STD_COM_FLAGS, \ + .iomem_base = (u8 *) base, .iomem_reg_shift = 0, \ + .io_type = SERIAL_IO_MEM } +#define JAZZ_SERIAL_PORT_DEFNS \ + _JAZZ_SERIAL_INIT(JAZZ_SERIAL1_IRQ, JAZZ_SERIAL1_BASE), \ + _JAZZ_SERIAL_INIT(JAZZ_SERIAL2_IRQ, JAZZ_SERIAL2_BASE), +#else +#define JAZZ_SERIAL_PORT_DEFNS +#endif + +#ifdef CONFIG_MIPS_COBALT +#include <asm/cobalt/cobalt.h> +#define COBALT_BASE_BAUD (18432000 / 16) +#define COBALT_SERIAL_PORT_DEFNS \ + /* UART CLK PORT IRQ FLAGS */ \ + { 0, COBALT_BASE_BAUD, 0xc800000, COBALT_SERIAL_IRQ, STD_COM_FLAGS }, /* ttyS0 */ +#else +#define COBALT_SERIAL_PORT_DEFNS +#endif + +/* + * Both Galileo boards have the same UART mappings. + */ +#if defined (CONFIG_MIPS_EV96100) || defined (CONFIG_MIPS_EV64120) +#include <asm/galileo-boards/ev96100.h> +#include <asm/galileo-boards/ev96100int.h> +#define EV96100_SERIAL_PORT_DEFNS \ + { .baud_base = EV96100_BASE_BAUD, .irq = EV96100INT_UART_0, \ + .flags = STD_COM_FLAGS, \ + .iomem_base = EV96100_UART0_REGS_BASE, .iomem_reg_shift = 2, \ + .io_type = SERIAL_IO_MEM }, \ + { .baud_base = EV96100_BASE_BAUD, .irq = EV96100INT_UART_0, \ + .flags = STD_COM_FLAGS, \ + .iomem_base = EV96100_UART1_REGS_BASE, .iomem_reg_shift = 2, \ + .io_type = SERIAL_IO_MEM }, +#else +#define EV96100_SERIAL_PORT_DEFNS +#endif + +#ifdef CONFIG_MIPS_ITE8172 +#include <asm/it8172/it8172.h> +#include <asm/it8172/it8172_int.h> +#include <asm/it8712.h> +#define ITE_SERIAL_PORT_DEFNS \ + { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_UART_BASE), \ + .irq = IT8172_UART_IRQ, .flags = STD_COM_FLAGS, .type = 0x3 }, \ + { .baud_base = (24000000/(16*13)), .port = (IT8172_PCI_IO_BASE + IT8712_UART1_PORT), \ + .irq = IT8172_SERIRQ_4, .flags = STD_COM_FLAGS, .type = 0x3 }, \ + /* Smart Card Reader 0 */ \ + { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_SCR0_BASE), \ + .irq = IT8172_SCR0_IRQ, .flags = STD_COM_FLAGS, .type = 0x3 }, \ + /* Smart Card Reader 1 */ \ + { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_SCR1_BASE), \ + .irq = IT8172_SCR1_IRQ, .flags = STD_COM_FLAGS, .type = 0x3 }, +#else +#define ITE_SERIAL_PORT_DEFNS +#endif + +#ifdef CONFIG_MIPS_IVR +#include <asm/it8172/it8172.h> +#include <asm/it8172/it8172_int.h> +#define IVR_SERIAL_PORT_DEFNS \ + { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_UART_BASE), \ + .irq = IT8172_UART_IRQ, .flags = STD_COM_FLAGS, .type = 0x3 }, \ + /* Smart Card Reader 1 */ \ + { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_SCR1_BASE), \ + .irq = IT8172_SCR1_IRQ, .flags = STD_COM_FLAGS, .type = 0x3 }, +#else +#define IVR_SERIAL_PORT_DEFNS +#endif + +#ifdef CONFIG_TOSHIBA_JMR3927 +#include <asm/jmr3927/jmr3927.h> +#define TXX927_SERIAL_PORT_DEFNS \ + { .baud_base = JMR3927_BASE_BAUD, .port = UART0_ADDR, .irq = UART0_INT, \ + .flags = UART0_FLAGS, .type = 1 }, \ + { .baud_base = JMR3927_BASE_BAUD, .port = UART1_ADDR, .irq = UART1_INT, \ + .flags = UART1_FLAGS, .type = 1 }, +#else +#define TXX927_SERIAL_PORT_DEFNS +#endif + +#ifdef CONFIG_SERIAL_AU1X00 +#include <asm/mach-au1x00/au1000.h> +#ifdef CONFIG_SOC_AU1000 +#define AU1000_SERIAL_PORT_DEFNS \ + { .baud_base = 0, .port = UART0_ADDR, \ + .iomem_base = (unsigned char *)UART0_ADDR, \ + .irq = AU1000_UART0_INT, .flags = STD_COM_FLAGS, \ + .iomem_reg_shift = 2 }, \ + { .baud_base = 0, .port = UART1_ADDR, \ + .iomem_base = (unsigned char *)UART1_ADDR, \ + .irq = AU1000_UART1_INT, .flags = STD_COM_FLAGS, \ + .iomem_reg_shift = 2 }, \ + { .baud_base = 0, .port = UART2_ADDR, \ + .iomem_base = (unsigned char *)UART2_ADDR, \ + .irq = AU1000_UART2_INT, .flags = STD_COM_FLAGS, \ + .iomem_reg_shift = 2 }, \ + { .baud_base = 0, .port = UART3_ADDR, \ + .iomem_base = (unsigned char *)UART3_ADDR, \ + .irq = AU1000_UART3_INT, .flags = STD_COM_FLAGS, \ + .iomem_reg_shift = 2 }, +#endif + +#ifdef CONFIG_SOC_AU1500 +#define AU1000_SERIAL_PORT_DEFNS \ + { .baud_base = 0, .port = UART0_ADDR, \ + .iomem_base = (unsigned char *)UART0_ADDR, \ + .irq = AU1500_UART0_INT, .flags = STD_COM_FLAGS, \ + .iomem_reg_shift = 2 }, \ + { .baud_base = 0, .port = UART3_ADDR, \ + .iomem_base = (unsigned char *)UART3_ADDR, \ + .irq = AU1500_UART3_INT, .flags = STD_COM_FLAGS, \ + .iomem_reg_shift = 2 }, +#endif + +#ifdef CONFIG_SOC_AU1100 +#define AU1000_SERIAL_PORT_DEFNS \ + { .baud_base = 0, .port = UART0_ADDR, \ + .iomem_base = (unsigned char *)UART0_ADDR, \ + .irq = AU1100_UART0_INT, .flags = STD_COM_FLAGS, \ + .iomem_reg_shift = 2 }, \ + { .baud_base = 0, .port = UART1_ADDR, \ + .iomem_base = (unsigned char *)UART1_ADDR, \ + .irq = AU1100_UART1_INT, .flags = STD_COM_FLAGS, \ + .iomem_reg_shift = 2 }, \ + { .baud_base = 0, .port = UART3_ADDR, \ + .iomem_base = (unsigned char *)UART3_ADDR, \ + .irq = AU1100_UART3_INT, .flags = STD_COM_FLAGS, \ + .iomem_reg_shift = 2 }, +#endif + +#ifdef CONFIG_SOC_AU1550 +#define AU1000_SERIAL_PORT_DEFNS \ + { .baud_base = 0, .port = UART0_ADDR, \ + .iomem_base = (unsigned char *)UART0_ADDR, \ + .irq = AU1550_UART0_INT, .flags = STD_COM_FLAGS, \ + .iomem_reg_shift = 2 }, \ + { .baud_base = 0, .port = UART1_ADDR, \ + .iomem_base = (unsigned char *)UART1_ADDR, \ + .irq = AU1550_UART1_INT, .flags = STD_COM_FLAGS, \ + .iomem_reg_shift = 2 }, \ + { .baud_base = 0, .port = UART3_ADDR, \ + .iomem_base = (unsigned char *)UART3_ADDR, \ + .irq = AU1550_UART3_INT, .flags = STD_COM_FLAGS,\ + .iomem_reg_shift = 2 }, +#endif + +#ifdef CONFIG_SOC_AU1200 +#define AU1000_SERIAL_PORT_DEFNS \ + { .baud_base = 0, .port = UART0_ADDR, \ + .iomem_base = (unsigned char *)UART0_ADDR, \ + .irq = AU1200_UART0_INT, .flags = STD_COM_FLAGS, \ + .iomem_reg_shift = 2 }, \ + { .baud_base = 0, .port = UART1_ADDR, \ + .iomem_base = (unsigned char *)UART1_ADDR, \ + .irq = AU1200_UART1_INT, .flags = STD_COM_FLAGS, \ + .iomem_reg_shift = 2 }, +#endif + +#else +#define AU1000_SERIAL_PORT_DEFNS +#endif + +#ifdef CONFIG_HAVE_STD_PC_SERIAL_PORT +#define STD_SERIAL_PORT_DEFNS \ + /* UART CLK PORT IRQ FLAGS */ \ + { 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS }, /* ttyS0 */ \ + { 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS }, /* ttyS1 */ \ + { 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS }, /* ttyS2 */ \ + { 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS }, /* ttyS3 */ + +#ifdef CONFIG_SERIAL_MANY_PORTS +#define EXTRA_SERIAL_PORT_DEFNS \ + { 0, BASE_BAUD, 0x1A0, 9, FOURPORT_FLAGS }, /* ttyS4 */ \ + { 0, BASE_BAUD, 0x1A8, 9, FOURPORT_FLAGS }, /* ttyS5 */ \ + { 0, BASE_BAUD, 0x1B0, 9, FOURPORT_FLAGS }, /* ttyS6 */ \ + { 0, BASE_BAUD, 0x1B8, 9, FOURPORT_FLAGS }, /* ttyS7 */ \ + { 0, BASE_BAUD, 0x2A0, 5, FOURPORT_FLAGS }, /* ttyS8 */ \ + { 0, BASE_BAUD, 0x2A8, 5, FOURPORT_FLAGS }, /* ttyS9 */ \ + { 0, BASE_BAUD, 0x2B0, 5, FOURPORT_FLAGS }, /* ttyS10 */ \ + { 0, BASE_BAUD, 0x2B8, 5, FOURPORT_FLAGS }, /* ttyS11 */ \ + { 0, BASE_BAUD, 0x330, 4, ACCENT_FLAGS }, /* ttyS12 */ \ + { 0, BASE_BAUD, 0x338, 4, ACCENT_FLAGS }, /* ttyS13 */ \ + { 0, BASE_BAUD, 0x000, 0, 0 }, /* ttyS14 (spare) */ \ + { 0, BASE_BAUD, 0x000, 0, 0 }, /* ttyS15 (spare) */ \ + { 0, BASE_BAUD, 0x100, 12, BOCA_FLAGS }, /* ttyS16 */ \ + { 0, BASE_BAUD, 0x108, 12, BOCA_FLAGS }, /* ttyS17 */ \ + { 0, BASE_BAUD, 0x110, 12, BOCA_FLAGS }, /* ttyS18 */ \ + { 0, BASE_BAUD, 0x118, 12, BOCA_FLAGS }, /* ttyS19 */ \ + { 0, BASE_BAUD, 0x120, 12, BOCA_FLAGS }, /* ttyS20 */ \ + { 0, BASE_BAUD, 0x128, 12, BOCA_FLAGS }, /* ttyS21 */ \ + { 0, BASE_BAUD, 0x130, 12, BOCA_FLAGS }, /* ttyS22 */ \ + { 0, BASE_BAUD, 0x138, 12, BOCA_FLAGS }, /* ttyS23 */ \ + { 0, BASE_BAUD, 0x140, 12, BOCA_FLAGS }, /* ttyS24 */ \ + { 0, BASE_BAUD, 0x148, 12, BOCA_FLAGS }, /* ttyS25 */ \ + { 0, BASE_BAUD, 0x150, 12, BOCA_FLAGS }, /* ttyS26 */ \ + { 0, BASE_BAUD, 0x158, 12, BOCA_FLAGS }, /* ttyS27 */ \ + { 0, BASE_BAUD, 0x160, 12, BOCA_FLAGS }, /* ttyS28 */ \ + { 0, BASE_BAUD, 0x168, 12, BOCA_FLAGS }, /* ttyS29 */ \ + { 0, BASE_BAUD, 0x170, 12, BOCA_FLAGS }, /* ttyS30 */ \ + { 0, BASE_BAUD, 0x178, 12, BOCA_FLAGS }, /* ttyS31 */ +#else /* CONFIG_SERIAL_MANY_PORTS */ +#define EXTRA_SERIAL_PORT_DEFNS +#endif /* CONFIG_SERIAL_MANY_PORTS */ + +#else /* CONFIG_HAVE_STD_PC_SERIAL_PORTS */ +#define STD_SERIAL_PORT_DEFNS +#define EXTRA_SERIAL_PORT_DEFNS +#endif /* CONFIG_HAVE_STD_PC_SERIAL_PORTS */ + +/* You can have up to four HUB6's in the system, but I've only + * included two cards here for a total of twelve ports. + */ +#if (defined(CONFIG_HUB6) && defined(CONFIG_SERIAL_MANY_PORTS)) +#define HUB6_SERIAL_PORT_DFNS \ + { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,0) }, /* ttyS32 */ \ + { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,1) }, /* ttyS33 */ \ + { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,2) }, /* ttyS34 */ \ + { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,3) }, /* ttyS35 */ \ + { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,4) }, /* ttyS36 */ \ + { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,5) }, /* ttyS37 */ \ + { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,0) }, /* ttyS38 */ \ + { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,1) }, /* ttyS39 */ \ + { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,2) }, /* ttyS40 */ \ + { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,3) }, /* ttyS41 */ \ + { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,4) }, /* ttyS42 */ \ + { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,5) }, /* ttyS43 */ +#else +#define HUB6_SERIAL_PORT_DFNS +#endif + +#ifdef CONFIG_MOMENCO_JAGUAR_ATX +/* Ordinary NS16552 duart with a 20MHz crystal. */ +#define JAGUAR_ATX_UART_CLK 20000000 +#define JAGUAR_ATX_BASE_BAUD (JAGUAR_ATX_UART_CLK / 16) + +#define JAGUAR_ATX_SERIAL1_IRQ 6 +#define JAGUAR_ATX_SERIAL1_BASE 0xfd000023L + +#define _JAGUAR_ATX_SERIAL_INIT(int, base) \ + { baud_base: JAGUAR_ATX_BASE_BAUD, irq: int, \ + flags: (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \ + iomem_base: (u8 *) base, iomem_reg_shift: 2, \ + io_type: SERIAL_IO_MEM } +#define MOMENCO_JAGUAR_ATX_SERIAL_PORT_DEFNS \ + _JAGUAR_ATX_SERIAL_INIT(JAGUAR_ATX_SERIAL1_IRQ, JAGUAR_ATX_SERIAL1_BASE) +#else +#define MOMENCO_JAGUAR_ATX_SERIAL_PORT_DEFNS +#endif + +#ifdef CONFIG_MOMENCO_OCELOT_3 +#define OCELOT_3_BASE_BAUD ( 20000000 / 16 ) +#define OCELOT_3_SERIAL_IRQ 6 +#define OCELOT_3_SERIAL_BASE (signed)0xfd000020 + +#define _OCELOT_3_SERIAL_INIT(int, base) \ + { baud_base: OCELOT_3_BASE_BAUD, irq: int, \ + flags: STD_COM_FLAGS, \ + iomem_base: (u8 *) base, iomem_reg_shift: 2, \ + io_type: SERIAL_IO_MEM } + +#define MOMENCO_OCELOT_3_SERIAL_PORT_DEFNS \ + _OCELOT_3_SERIAL_INIT(OCELOT_3_SERIAL_IRQ, OCELOT_3_SERIAL_BASE) +#else +#define MOMENCO_OCELOT_3_SERIAL_PORT_DEFNS +#endif + +#ifdef CONFIG_MOMENCO_OCELOT +/* Ordinary NS16552 duart with a 20MHz crystal. */ +#define OCELOT_BASE_BAUD ( 20000000 / 16 ) + +#define OCELOT_SERIAL1_IRQ 4 +#define OCELOT_SERIAL1_BASE 0xe0001020 + +#define _OCELOT_SERIAL_INIT(int, base) \ + { .baud_base = OCELOT_BASE_BAUD, .irq = int, .flags = STD_COM_FLAGS, \ + .iomem_base = (u8 *) base, .iomem_reg_shift = 2, \ + .io_type = SERIAL_IO_MEM } +#define MOMENCO_OCELOT_SERIAL_PORT_DEFNS \ + _OCELOT_SERIAL_INIT(OCELOT_SERIAL1_IRQ, OCELOT_SERIAL1_BASE) +#else +#define MOMENCO_OCELOT_SERIAL_PORT_DEFNS +#endif + +#ifdef CONFIG_MOMENCO_OCELOT_G +/* Ordinary NS16552 duart with a 20MHz crystal. */ +#define OCELOT_G_BASE_BAUD ( 20000000 / 16 ) + +#define OCELOT_G_SERIAL1_IRQ 4 +#if 0 +#define OCELOT_G_SERIAL1_BASE 0xe0001020 +#else +#define OCELOT_G_SERIAL1_BASE 0xfd000020 +#endif + +#define _OCELOT_G_SERIAL_INIT(int, base) \ + { .baud_base = OCELOT_G_BASE_BAUD, .irq = int, .flags = STD_COM_FLAGS,\ + .iomem_base = (u8 *) base, .iomem_reg_shift = 2, \ + .io_type = SERIAL_IO_MEM } +#define MOMENCO_OCELOT_G_SERIAL_PORT_DEFNS \ + _OCELOT_G_SERIAL_INIT(OCELOT_G_SERIAL1_IRQ, OCELOT_G_SERIAL1_BASE) +#else +#define MOMENCO_OCELOT_G_SERIAL_PORT_DEFNS +#endif + +#ifdef CONFIG_MOMENCO_OCELOT_C +/* Ordinary NS16552 duart with a 20MHz crystal. */ +#define OCELOT_C_BASE_BAUD ( 20000000 / 16 ) + +#define OCELOT_C_SERIAL1_IRQ 80 +#define OCELOT_C_SERIAL1_BASE 0xfd000020 + +#define OCELOT_C_SERIAL2_IRQ 81 +#define OCELOT_C_SERIAL2_BASE 0xfd000000 + +#define _OCELOT_C_SERIAL_INIT(int, base) \ + { .baud_base = OCELOT_C_BASE_BAUD, \ + .irq = (int), \ + .flags = STD_COM_FLAGS, \ + .iomem_base = (u8 *) base, \ + .iomem_reg_shift = 2, \ + .io_type = SERIAL_IO_MEM \ + } +#define MOMENCO_OCELOT_C_SERIAL_PORT_DEFNS \ + _OCELOT_C_SERIAL_INIT(OCELOT_C_SERIAL1_IRQ, OCELOT_C_SERIAL1_BASE), \ + _OCELOT_C_SERIAL_INIT(OCELOT_C_SERIAL2_IRQ, OCELOT_C_SERIAL2_BASE) +#else +#define MOMENCO_OCELOT_C_SERIAL_PORT_DEFNS +#endif + +#ifdef CONFIG_DDB5477 +#include <asm/ddb5xxx/ddb5477.h> +#define DDB5477_SERIAL_PORT_DEFNS \ + { .baud_base = BASE_BAUD, .irq = VRC5477_IRQ_UART0, \ + .flags = STD_COM_FLAGS, .iomem_base = (u8*)0xbfa04200, \ + .iomem_reg_shift = 3, .io_type = SERIAL_IO_MEM}, \ + { .baud_base = BASE_BAUD, .irq = VRC5477_IRQ_UART1, \ + .flags = STD_COM_FLAGS, .iomem_base = (u8*)0xbfa04240, \ + .iomem_reg_shift = 3, .io_type = SERIAL_IO_MEM}, +#else +#define DDB5477_SERIAL_PORT_DEFNS +#endif + +#ifdef CONFIG_SGI_IP32 +/* + * The IP32 (SGI O2) has standard serial ports (UART 16550A) mapped in memory + * They are initialized in ip32_setup + */ +#define IP32_SERIAL_PORT_DEFNS \ + {},{}, +#else +#define IP32_SERIAL_PORT_DEFNS +#endif /* CONFIG_SGI_IP32 */ + +#define SERIAL_PORT_DFNS \ + COBALT_SERIAL_PORT_DEFNS \ + DDB5477_SERIAL_PORT_DEFNS \ + EV96100_SERIAL_PORT_DEFNS \ + EXTRA_SERIAL_PORT_DEFNS \ + HUB6_SERIAL_PORT_DFNS \ + IP32_SERIAL_PORT_DEFNS \ + ITE_SERIAL_PORT_DEFNS \ + IVR_SERIAL_PORT_DEFNS \ + JAZZ_SERIAL_PORT_DEFNS \ + STD_SERIAL_PORT_DEFNS \ + MOMENCO_OCELOT_G_SERIAL_PORT_DEFNS \ + MOMENCO_OCELOT_C_SERIAL_PORT_DEFNS \ + MOMENCO_OCELOT_SERIAL_PORT_DEFNS \ + MOMENCO_OCELOT_3_SERIAL_PORT_DEFNS \ + TXX927_SERIAL_PORT_DEFNS \ + AU1000_SERIAL_PORT_DEFNS + +#endif /* _ASM_SERIAL_H */ |