diff options
Diffstat (limited to 'include/asm-mips/mach-pb1x00')
| -rw-r--r-- | include/asm-mips/mach-pb1x00/mc146818rtc.h | 34 | ||||
| -rw-r--r-- | include/asm-mips/mach-pb1x00/pb1000.h | 172 | ||||
| -rw-r--r-- | include/asm-mips/mach-pb1x00/pb1100.h | 85 | ||||
| -rw-r--r-- | include/asm-mips/mach-pb1x00/pb1500.h | 51 | ||||
| -rw-r--r-- | include/asm-mips/mach-pb1x00/pb1550.h | 169 |
5 files changed, 511 insertions, 0 deletions
diff --git a/include/asm-mips/mach-pb1x00/mc146818rtc.h b/include/asm-mips/mach-pb1x00/mc146818rtc.h new file mode 100644 index 00000000000..622c58710e5 --- /dev/null +++ b/include/asm-mips/mach-pb1x00/mc146818rtc.h @@ -0,0 +1,34 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1998, 2001, 03 by Ralf Baechle + * + * RTC routines for PC style attached Dallas chip. + */ +#ifndef __ASM_MACH_AU1XX_MC146818RTC_H +#define __ASM_MACH_AU1XX_MC146818RTC_H + +#include <asm/io.h> +#include <asm/mach-au1x00/au1000.h> + +#define RTC_PORT(x) (0x0c000000 + (x)) +#define RTC_IRQ 8 +#define PB1500_RTC_ADDR 0x0c000000 + +static inline unsigned char CMOS_READ(unsigned long offset) +{ + offset <<= 2; + return (u8)(au_readl(offset + PB1500_RTC_ADDR) & 0xff); +} + +static inline void CMOS_WRITE(unsigned char data, unsigned long offset) +{ + offset <<= 2; + au_writel(data, offset + PB1500_RTC_ADDR); +} + +#define RTC_ALWAYS_BCD 1 + +#endif /* __ASM_MACH_AU1XX_MC146818RTC_H */ diff --git a/include/asm-mips/mach-pb1x00/pb1000.h b/include/asm-mips/mach-pb1x00/pb1000.h new file mode 100644 index 00000000000..50c1e413a68 --- /dev/null +++ b/include/asm-mips/mach-pb1x00/pb1000.h @@ -0,0 +1,172 @@ +/* + * Alchemy Semi PB1000 Referrence Board + * + * Copyright 2001 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * ppopov@mvista.com or source@mvista.com + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + * + * + */ +#ifndef __ASM_PB1000_H +#define __ASM_PB1000_H + +/* PCMCIA PB1000 specific defines */ +#define PCMCIA_MAX_SOCK 1 +#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1) + +#define PB1000_PCR 0xBE000000 + #define PCR_SLOT_0_VPP0 (1<<0) + #define PCR_SLOT_0_VPP1 (1<<1) + #define PCR_SLOT_0_VCC0 (1<<2) + #define PCR_SLOT_0_VCC1 (1<<3) + #define PCR_SLOT_0_RST (1<<4) + + #define PCR_SLOT_1_VPP0 (1<<8) + #define PCR_SLOT_1_VPP1 (1<<9) + #define PCR_SLOT_1_VCC0 (1<<10) + #define PCR_SLOT_1_VCC1 (1<<11) + #define PCR_SLOT_1_RST (1<<12) + +#define PB1000_MDR 0xBE000004 + #define MDR_PI (1<<5) /* pcmcia int latch */ + #define MDR_EPI (1<<14) /* enable pcmcia int */ + #define MDR_CPI (1<<15) /* clear pcmcia int */ + +#define PB1000_ACR1 0xBE000008 + #define ACR1_SLOT_0_CD1 (1<<0) /* card detect 1 */ + #define ACR1_SLOT_0_CD2 (1<<1) /* card detect 2 */ + #define ACR1_SLOT_0_READY (1<<2) /* ready */ + #define ACR1_SLOT_0_STATUS (1<<3) /* status change */ + #define ACR1_SLOT_0_VS1 (1<<4) /* voltage sense 1 */ + #define ACR1_SLOT_0_VS2 (1<<5) /* voltage sense 2 */ + #define ACR1_SLOT_0_INPACK (1<<6) /* inpack pin status */ + #define ACR1_SLOT_1_CD1 (1<<8) /* card detect 1 */ + #define ACR1_SLOT_1_CD2 (1<<9) /* card detect 2 */ + #define ACR1_SLOT_1_READY (1<<10) /* ready */ + #define ACR1_SLOT_1_STATUS (1<<11) /* status change */ + #define ACR1_SLOT_1_VS1 (1<<12) /* voltage sense 1 */ + #define ACR1_SLOT_1_VS2 (1<<13) /* voltage sense 2 */ + #define ACR1_SLOT_1_INPACK (1<<14) /* inpack pin status */ + +#define CPLD_AUX0 0xBE00000C +#define CPLD_AUX1 0xBE000010 +#define CPLD_AUX2 0xBE000014 + +/* Voltage levels */ + +/* VPPEN1 - VPPEN0 */ +#define VPP_GND ((0<<1) | (0<<0)) +#define VPP_5V ((1<<1) | (0<<0)) +#define VPP_3V ((0<<1) | (1<<0)) +#define VPP_12V ((0<<1) | (1<<0)) +#define VPP_HIZ ((1<<1) | (1<<0)) + +/* VCCEN1 - VCCEN0 */ +#define VCC_3V ((0<<1) | (1<<0)) +#define VCC_5V ((1<<1) | (0<<0)) +#define VCC_HIZ ((0<<1) | (0<<0)) + +/* VPP/VCC */ +#define SET_VCC_VPP(VCC, VPP, SLOT)\ + ((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8)) + + +/* PCI PB1000 specific defines */ +/* The reason these defines are here instead of au1000.h is because + * the Au1000 does not have a PCI bus controller so the PCI implementation + * on the some of the older Pb1000 boards was very board specific. + */ +#define PCI_CONFIG_BASE 0xBA020000 /* the only external slot */ + +#define SDRAM_DEVID 0xBA010000 +#define SDRAM_CMD 0xBA010004 +#define SDRAM_CLASS 0xBA010008 +#define SDRAM_MISC 0xBA01000C +#define SDRAM_MBAR 0xBA010010 + +#define PCI_IO_DATA_PORT 0xBA800000 + +#define PCI_IO_ADDR 0xBE00001C +#define PCI_INT_ACK 0xBBC00000 +#define PCI_IO_READ 0xBBC00020 +#define PCI_IO_WRITE 0xBBC00030 + +#define PCI_BRIDGE_CONFIG 0xBE000018 + +#define PCI_IO_START 0x10000000 +#define PCI_IO_END 0x1000ffff +#define PCI_MEM_START 0x18000000 +#define PCI_MEM_END 0x18ffffff + +#define PCI_FIRST_DEVFN 0 +#define PCI_LAST_DEVFN 1 + +static inline u8 au_pci_io_readb(u32 addr) +{ + writel(addr, PCI_IO_ADDR); + writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff) | (1<<12), PCI_BRIDGE_CONFIG); + return (readl(PCI_IO_DATA_PORT) & 0xff); +} + +static inline u16 au_pci_io_readw(u32 addr) +{ + writel(addr, PCI_IO_ADDR); + writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff) | (1<<13), PCI_BRIDGE_CONFIG); + return (readl(PCI_IO_DATA_PORT) & 0xffff); +} + +static inline u32 au_pci_io_readl(u32 addr) +{ + writel(addr, PCI_IO_ADDR); + writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff), PCI_BRIDGE_CONFIG); + return readl(PCI_IO_DATA_PORT); +} + +static inline void au_pci_io_writeb(u8 val, u32 addr) +{ + writel(addr, PCI_IO_ADDR); + writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff) | (1<<12), PCI_BRIDGE_CONFIG); + writel(val, PCI_IO_DATA_PORT); +} + +static inline void au_pci_io_writew(u16 val, u32 addr) +{ + writel(addr, PCI_IO_ADDR); + writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff) | (1<<13), PCI_BRIDGE_CONFIG); + writel(val, PCI_IO_DATA_PORT); +} + +static inline void au_pci_io_writel(u32 val, u32 addr) +{ + writel(addr, PCI_IO_ADDR); + writel(readl(PCI_BRIDGE_CONFIG) & 0xffffcfff, PCI_BRIDGE_CONFIG); + writel(val, PCI_IO_DATA_PORT); +} + +static inline void set_sdram_extbyte(void) +{ + writel(readl(PCI_BRIDGE_CONFIG) & 0xffffff00, PCI_BRIDGE_CONFIG); +} + +static inline void set_slot_extbyte(void) +{ + writel((readl(PCI_BRIDGE_CONFIG) & 0xffffbf00) | 0x18, PCI_BRIDGE_CONFIG); +} +#endif /* __ASM_PB1000_H */ diff --git a/include/asm-mips/mach-pb1x00/pb1100.h b/include/asm-mips/mach-pb1x00/pb1100.h new file mode 100644 index 00000000000..4c5a1cd0184 --- /dev/null +++ b/include/asm-mips/mach-pb1x00/pb1100.h @@ -0,0 +1,85 @@ +/* + * Alchemy Semi PB1100 Referrence Board + * + * Copyright 2001 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * ppopov@mvista.com or source@mvista.com + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + * + * + */ +#ifndef __ASM_PB1100_H +#define __ASM_PB1100_H + +#define PB1100_IDENT 0xAE000000 +#define BOARD_STATUS_REG 0xAE000004 + #define PB1100_ROM_SEL (1<<15) + #define PB1100_ROM_SIZ (1<<14) + #define PB1100_SWAP_BOOT (1<<13) + #define PB1100_FLASH_WP (1<<12) + #define PB1100_ROM_H_STS (1<<11) + #define PB1100_ROM_L_STS (1<<10) + #define PB1100_FLASH_H_STS (1<<9) + #define PB1100_FLASH_L_STS (1<<8) + #define PB1100_SRAM_SIZ (1<<7) + #define PB1100_TSC_BUSY (1<<6) + #define PB1100_PCMCIA_VS_MASK (3<<4) + #define PB1100_RS232_CD (1<<3) + #define PB1100_RS232_CTS (1<<2) + #define PB1100_RS232_DSR (1<<1) + #define PB1100_RS232_RI (1<<0) + +#define PB1100_IRDA_RS232 0xAE00000C + #define PB1100_IRDA_FULL (0<<14) /* full power */ + #define PB1100_IRDA_SHUTDOWN (1<<14) + #define PB1100_IRDA_TT (2<<14) /* 2/3 power */ + #define PB1100_IRDA_OT (3<<14) /* 1/3 power */ + #define PB1100_IRDA_FIR (1<<13) + +#define PCMCIA_BOARD_REG 0xAE000010 + #define PB1100_SD_WP1_RO (1<<15) /* read only */ + #define PB1100_SD_WP0_RO (1<<14) /* read only */ + #define PB1100_SD_PWR1 (1<<11) /* applies power to SD1 */ + #define PB1100_SD_PWR0 (1<<10) /* applies power to SD0 */ + #define PB1100_SEL_SD_CONN1 (1<<9) + #define PB1100_SEL_SD_CONN0 (1<<8) + #define PC_DEASSERT_RST (1<<7) + #define PC_DRV_EN (1<<4) + +#define PB1100_G_CONTROL 0xAE000014 /* graphics control */ + +#define PB1100_RST_VDDI 0xAE00001C + #define PB1100_SOFT_RESET (1<<15) /* clear to reset the board */ + #define PB1100_VDDI_MASK (0x1F) + +#define PB1100_LEDS 0xAE000018 + +/* 11:8 is 4 discreet LEDs. Clearing a bit illuminates the LED. + * 7:0 is the LED Display's decimal points. + */ +#define PB1100_HEX_LED 0xAE000018 + +/* PCMCIA PB1100 specific defines */ +#define PCMCIA_MAX_SOCK 0 +#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1) + +/* VPP/VCC */ +#define SET_VCC_VPP(VCC, VPP) (((VCC)<<2) | ((VPP)<<0)) + +#endif /* __ASM_PB1100_H */ diff --git a/include/asm-mips/mach-pb1x00/pb1500.h b/include/asm-mips/mach-pb1x00/pb1500.h new file mode 100644 index 00000000000..d6c779747b3 --- /dev/null +++ b/include/asm-mips/mach-pb1x00/pb1500.h @@ -0,0 +1,51 @@ +/* + * Alchemy Semi PB1500 Referrence Board + * + * Copyright 2001 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * ppopov@mvista.com or source@mvista.com + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + * + * + */ +#ifndef __ASM_PB1500_H +#define __ASM_PB1500_H + + +#define IDENT_BOARD_REG 0xAE000000 +#define BOARD_STATUS_REG 0xAE000004 +#define PCI_BOARD_REG 0xAE000010 +#define PCMCIA_BOARD_REG 0xAE000010 + #define PC_DEASSERT_RST 0x80 + #define PC_DRV_EN 0x10 +#define PB1500_G_CONTROL 0xAE000014 +#define PB1500_RST_VDDI 0xAE00001C +#define PB1500_LEDS 0xAE000018 + +#define PB1500_HEX_LED 0xAF000004 +#define PB1500_HEX_LED_BLANK 0xAF000008 + +/* PCMCIA PB1500 specific defines */ +#define PCMCIA_MAX_SOCK 0 +#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1) + +/* VPP/VCC */ +#define SET_VCC_VPP(VCC, VPP) (((VCC)<<2) | ((VPP)<<0)) + +#endif /* __ASM_PB1500_H */ diff --git a/include/asm-mips/mach-pb1x00/pb1550.h b/include/asm-mips/mach-pb1x00/pb1550.h new file mode 100644 index 00000000000..431d6088ea9 --- /dev/null +++ b/include/asm-mips/mach-pb1x00/pb1550.h @@ -0,0 +1,169 @@ +/* + * AMD Alchemy Semi PB1550 Referrence Board + * Board Registers defines. + * + * Copyright 2004 Embedded Edge LLC. + * Copyright 2005 Ralf Baechle (ralf@linux-mips.org) + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + * + * + */ +#ifndef __ASM_PB1550_H +#define __ASM_PB1550_H + +#include <linux/config.h> +#include <linux/types.h> + +#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX +#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX +#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC3_TX +#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC3_RX + +#define SPI_PSC_BASE PSC0_BASE_ADDR +#define AC97_PSC_BASE PSC1_BASE_ADDR +#define SMBUS_PSC_BASE PSC2_BASE_ADDR +#define I2S_PSC_BASE PSC3_BASE_ADDR + +#define BCSR_PHYS_ADDR 0xAF000000 + +typedef volatile struct +{ + /*00*/ u16 whoami; + u16 reserved0; + /*04*/ u16 status; + u16 reserved1; + /*08*/ u16 switches; + u16 reserved2; + /*0C*/ u16 resets; + u16 reserved3; + /*10*/ u16 pcmcia; + u16 reserved4; + /*14*/ u16 pci; + u16 reserved5; + /*18*/ u16 leds; + u16 reserved6; + /*1C*/ u16 system; + u16 reserved7; + +} BCSR; + +static BCSR * const bcsr = (BCSR *)BCSR_PHYS_ADDR; + +/* + * Register bit definitions for the BCSRs + */ +#define BCSR_WHOAMI_DCID 0x000F +#define BCSR_WHOAMI_CPLD 0x00F0 +#define BCSR_WHOAMI_BOARD 0x0F00 + +#define BCSR_STATUS_PCMCIA0VS 0x0003 +#define BCSR_STATUS_PCMCIA1VS 0x000C +#define BCSR_STATUS_PCMCIA0FI 0x0010 +#define BCSR_STATUS_PCMCIA1FI 0x0020 +#define BCSR_STATUS_SWAPBOOT 0x0040 +#define BCSR_STATUS_SRAMWIDTH 0x0080 +#define BCSR_STATUS_FLASHBUSY 0x0100 +#define BCSR_STATUS_ROMBUSY 0x0200 +#define BCSR_STATUS_USBOTGID 0x0800 +#define BCSR_STATUS_U0RXD 0x1000 +#define BCSR_STATUS_U1RXD 0x2000 +#define BCSR_STATUS_U3RXD 0x8000 + +#define BCSR_SWITCHES_OCTAL 0x00FF +#define BCSR_SWITCHES_DIP_1 0x0080 +#define BCSR_SWITCHES_DIP_2 0x0040 +#define BCSR_SWITCHES_DIP_3 0x0020 +#define BCSR_SWITCHES_DIP_4 0x0010 +#define BCSR_SWITCHES_DIP_5 0x0008 +#define BCSR_SWITCHES_DIP_6 0x0004 +#define BCSR_SWITCHES_DIP_7 0x0002 +#define BCSR_SWITCHES_DIP_8 0x0001 +#define BCSR_SWITCHES_ROTARY 0x0F00 + +#define BCSR_RESETS_PHY0 0x0001 +#define BCSR_RESETS_PHY1 0x0002 +#define BCSR_RESETS_DC 0x0004 +#define BCSR_RESETS_WSC 0x2000 +#define BCSR_RESETS_SPISEL 0x4000 +#define BCSR_RESETS_DMAREQ 0x8000 + +#define BCSR_PCMCIA_PC0VPP 0x0003 +#define BCSR_PCMCIA_PC0VCC 0x000C +#define BCSR_PCMCIA_PC0DRVEN 0x0010 +#define BCSR_PCMCIA_PC0RST 0x0080 +#define BCSR_PCMCIA_PC1VPP 0x0300 +#define BCSR_PCMCIA_PC1VCC 0x0C00 +#define BCSR_PCMCIA_PC1DRVEN 0x1000 +#define BCSR_PCMCIA_PC1RST 0x8000 + +#define BCSR_PCI_M66EN 0x0001 +#define BCSR_PCI_M33 0x0100 +#define BCSR_PCI_EXTERNARB 0x0200 +#define BCSR_PCI_GPIO200RST 0x0400 +#define BCSR_PCI_CLKOUT 0x0800 +#define BCSR_PCI_CFGHOST 0x1000 + +#define BCSR_LEDS_DECIMALS 0x00FF +#define BCSR_LEDS_LED0 0x0100 +#define BCSR_LEDS_LED1 0x0200 +#define BCSR_LEDS_LED2 0x0400 +#define BCSR_LEDS_LED3 0x0800 + +#define BCSR_SYSTEM_VDDI 0x001F +#define BCSR_SYSTEM_POWEROFF 0x4000 +#define BCSR_SYSTEM_RESET 0x8000 + +#define PCMCIA_MAX_SOCK 1 +#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1) + +/* VPP/VCC */ +#define SET_VCC_VPP(VCC, VPP, SLOT)\ + ((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8)) + +#if defined(CONFIG_MTD_PB1550_BOOT) && defined(CONFIG_MTD_PB1550_USER) +#define PB1550_BOTH_BANKS +#elif defined(CONFIG_MTD_PB1550_BOOT) && !defined(CONFIG_MTD_PB1550_USER) +#define PB1550_BOOT_ONLY +#elif !defined(CONFIG_MTD_PB1550_BOOT) && defined(CONFIG_MTD_PB1550_USER) +#define PB1550_USER_ONLY +#endif + +/* Timing values as described in databook, * ns value stripped of + * lower 2 bits. + * These defines are here rather than an SOC1550 generic file because + * the parts chosen on another board may be different and may require + * different timings. + */ +#define NAND_T_H (18 >> 2) +#define NAND_T_PUL (30 >> 2) +#define NAND_T_SU (30 >> 2) +#define NAND_T_WH (30 >> 2) + +/* Bitfield shift amounts */ +#define NAND_T_H_SHIFT 0 +#define NAND_T_PUL_SHIFT 4 +#define NAND_T_SU_SHIFT 8 +#define NAND_T_WH_SHIFT 12 + +#define NAND_TIMING ((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \ + ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \ + ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \ + ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT) + +#endif /* __ASM_PB1550_H */ |