diff options
Diffstat (limited to 'include/asm-blackfin')
| -rw-r--r-- | include/asm-blackfin/mach-bf533/defBF532.h | 29 | ||||
| -rw-r--r-- | include/asm-blackfin/mach-bf537/blackfin.h | 24 | ||||
| -rw-r--r-- | include/asm-blackfin/mach-bf548/blackfin.h | 23 | ||||
| -rw-r--r-- | include/asm-blackfin/mach-bf561/defBF561.h | 29 |
4 files changed, 57 insertions, 48 deletions
diff --git a/include/asm-blackfin/mach-bf533/defBF532.h b/include/asm-blackfin/mach-bf533/defBF532.h index 37134aaf995..17e1548cec0 100644 --- a/include/asm-blackfin/mach-bf533/defBF532.h +++ b/include/asm-blackfin/mach-bf533/defBF532.h @@ -88,20 +88,25 @@ #define RTC_PREN 0xFFC00314 /* RTC Prescaler Enable Register (alternate macro) */ /* UART Controller (0xFFC00400 - 0xFFC004FF) */ -#define UART_THR 0xFFC00400 /* Transmit Holding register */ -#define UART_RBR 0xFFC00400 /* Receive Buffer register */ -#define UART_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */ -#define UART_IER 0xFFC00404 /* Interrupt Enable Register */ -#define UART_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */ -#define UART_IIR 0xFFC00408 /* Interrupt Identification Register */ -#define UART_LCR 0xFFC0040C /* Line Control Register */ -#define UART_MCR 0xFFC00410 /* Modem Control Register */ -#define UART_LSR 0xFFC00414 /* Line Status Register */ + +/* + * Because include/linux/serial_reg.h have defined UART_*, + * So we define blackfin uart regs to BFIN_UART_*. + */ +#define BFIN_UART_THR 0xFFC00400 /* Transmit Holding register */ +#define BFIN_UART_RBR 0xFFC00400 /* Receive Buffer register */ +#define BFIN_UART_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */ +#define BFIN_UART_IER 0xFFC00404 /* Interrupt Enable Register */ +#define BFIN_UART_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */ +#define BFIN_UART_IIR 0xFFC00408 /* Interrupt Identification Register */ +#define BFIN_UART_LCR 0xFFC0040C /* Line Control Register */ +#define BFIN_UART_MCR 0xFFC00410 /* Modem Control Register */ +#define BFIN_UART_LSR 0xFFC00414 /* Line Status Register */ #if 0 -#define UART_MSR 0xFFC00418 /* Modem Status Register (UNUSED in ADSP-BF532) */ +#define BFIN_UART_MSR 0xFFC00418 /* Modem Status Register (UNUSED in ADSP-BF532) */ #endif -#define UART_SCR 0xFFC0041C /* SCR Scratch Register */ -#define UART_GCTL 0xFFC00424 /* Global Control Register */ +#define BFIN_UART_SCR 0xFFC0041C /* SCR Scratch Register */ +#define BFIN_UART_GCTL 0xFFC00424 /* Global Control Register */ /* SPI Controller (0xFFC00500 - 0xFFC005FF) */ #define SPI0_REGBASE 0xFFC00500 diff --git a/include/asm-blackfin/mach-bf537/blackfin.h b/include/asm-blackfin/mach-bf537/blackfin.h index 53fcfa3408d..4f10ee0ae10 100644 --- a/include/asm-blackfin/mach-bf537/blackfin.h +++ b/include/asm-blackfin/mach-bf537/blackfin.h @@ -82,8 +82,6 @@ #define STATUS_P1 0x02 #define STATUS_P0 0x01 -/* UART 0*/ - /* DMA Channnel */ #define bfin_read_CH_UART_RX() bfin_read_CH_UART0_RX() #define bfin_write_CH_UART_RX(val) bfin_write_CH_UART0_RX(val) @@ -106,37 +104,37 @@ /* MMR Registers*/ #define bfin_read_UART_THR() bfin_read_UART0_THR() #define bfin_write_UART_THR(val) bfin_write_UART0_THR(val) -#define UART_THR UART0_THR +#define BFIN_UART_THR UART0_THR #define bfin_read_UART_RBR() bfin_read_UART0_RBR() #define bfin_write_UART_RBR(val) bfin_write_UART0_RBR(val) -#define UART_RBR UART0_RBR +#define BFIN_UART_RBR UART0_RBR #define bfin_read_UART_DLL() bfin_read_UART0_DLL() #define bfin_write_UART_DLL(val) bfin_write_UART0_DLL(val) -#define UART_DLL UART0_DLL +#define BFIN_UART_DLL UART0_DLL #define bfin_read_UART_IER() bfin_read_UART0_IER() #define bfin_write_UART_IER(val) bfin_write_UART0_IER(val) -#define UART_IER UART0_IER +#define BFIN_UART_IER UART0_IER #define bfin_read_UART_DLH() bfin_read_UART0_DLH() #define bfin_write_UART_DLH(val) bfin_write_UART0_DLH(val) -#define UART_DLH UART0_DLH +#define BFIN_UART_DLH UART0_DLH #define bfin_read_UART_IIR() bfin_read_UART0_IIR() #define bfin_write_UART_IIR(val) bfin_write_UART0_IIR(val) -#define UART_IIR UART0_IIR +#define BFIN_UART_IIR UART0_IIR #define bfin_read_UART_LCR() bfin_read_UART0_LCR() #define bfin_write_UART_LCR(val) bfin_write_UART0_LCR(val) -#define UART_LCR UART0_LCR +#define BFIN_UART_LCR UART0_LCR #define bfin_read_UART_MCR() bfin_read_UART0_MCR() #define bfin_write_UART_MCR(val) bfin_write_UART0_MCR(val) -#define UART_MCR UART0_MCR +#define BFIN_UART_MCR UART0_MCR #define bfin_read_UART_LSR() bfin_read_UART0_LSR() #define bfin_write_UART_LSR(val) bfin_write_UART0_LSR(val) -#define UART_LSR UART0_LSR +#define BFIN_UART_LSR UART0_LSR #define bfin_read_UART_SCR() bfin_read_UART0_SCR() #define bfin_write_UART_SCR(val) bfin_write_UART0_SCR(val) -#define UART_SCR UART0_SCR +#define BFIN_UART_SCR UART0_SCR #define bfin_read_UART_GCTL() bfin_read_UART0_GCTL() #define bfin_write_UART_GCTL(val) bfin_write_UART0_GCTL(val) -#define UART_GCTL UART0_GCTL +#define BFIN_UART_GCTL UART0_GCTL /* DPMC*/ #define bfin_read_STOPCK_OFF() bfin_read_STOPCK() diff --git a/include/asm-blackfin/mach-bf548/blackfin.h b/include/asm-blackfin/mach-bf548/blackfin.h index 3bd67da8605..b8509c16ecd 100644 --- a/include/asm-blackfin/mach-bf548/blackfin.h +++ b/include/asm-blackfin/mach-bf548/blackfin.h @@ -153,17 +153,18 @@ #define bfin_write_UART_SCR(val) bfin_write_UART1_SCR(val) #define bfin_read_UART_GCTL() bfin_read_UART1_GCTL() #define bfin_write_UART_GCTL(val) bfin_write_UART1_GCTL(val) -#define UART_THR UART1_THR -#define UART_RBR UART1_RBR -#define UART_DLL UART1_DLL -#define UART_IER UART1_IER -#define UART_DLH UART1_DLH -#define UART_IIR UART1_IIR -#define UART_LCR UART1_LCR -#define UART_MCR UART1_MCR -#define UART_LSR UART1_LSR -#define UART_SCR UART1_SCR -#define UART_GCTL UART1_GCTL + +#define BFIN_UART_THR UART1_THR +#define BFIN_UART_RBR UART1_RBR +#define BFIN_UART_DLL UART1_DLL +#define BFIN_UART_IER UART1_IER +#define BFIN_UART_DLH UART1_DLH +#define BFIN_UART_IIR UART1_IIR +#define BFIN_UART_LCR UART1_LCR +#define BFIN_UART_MCR UART1_MCR +#define BFIN_UART_LSR UART1_LSR +#define BFIN_UART_SCR UART1_SCR +#define BFIN_UART_GCTL UART1_GCTL /* PLL_DIV Masks */ #define CCLK_DIV1 CSEL_DIV1 /* CCLK = VCO / 1 */ diff --git a/include/asm-blackfin/mach-bf561/defBF561.h b/include/asm-blackfin/mach-bf561/defBF561.h index c3c0eb13c81..bee30230187 100644 --- a/include/asm-blackfin/mach-bf561/defBF561.h +++ b/include/asm-blackfin/mach-bf561/defBF561.h @@ -110,18 +110,23 @@ #define WDOGB_STAT 0xFFC01208 /* Watchdog Status register */ /* UART Controller (0xFFC00400 - 0xFFC004FF) */ -#define UART_THR 0xFFC00400 /* Transmit Holding register */ -#define UART_RBR 0xFFC00400 /* Receive Buffer register */ -#define UART_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */ -#define UART_IER 0xFFC00404 /* Interrupt Enable Register */ -#define UART_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */ -#define UART_IIR 0xFFC00408 /* Interrupt Identification Register */ -#define UART_LCR 0xFFC0040C /* Line Control Register */ -#define UART_MCR 0xFFC00410 /* Modem Control Register */ -#define UART_LSR 0xFFC00414 /* Line Status Register */ -#define UART_MSR 0xFFC00418 /* Modem Status Register */ -#define UART_SCR 0xFFC0041C /* SCR Scratch Register */ -#define UART_GCTL 0xFFC00424 /* Global Control Register */ + +/* + * Because include/linux/serial_reg.h have defined UART_*, + * So we define blackfin uart regs to BFIN_UART0_*. + */ +#define BFIN_UART_THR 0xFFC00400 /* Transmit Holding register */ +#define BFIN_UART_RBR 0xFFC00400 /* Receive Buffer register */ +#define BFIN_UART_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */ +#define BFIN_UART_IER 0xFFC00404 /* Interrupt Enable Register */ +#define BFIN_UART_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */ +#define BFIN_UART_IIR 0xFFC00408 /* Interrupt Identification Register */ +#define BFIN_UART_LCR 0xFFC0040C /* Line Control Register */ +#define BFIN_UART_MCR 0xFFC00410 /* Modem Control Register */ +#define BFIN_UART_LSR 0xFFC00414 /* Line Status Register */ +#define BFIN_UART_MSR 0xFFC00418 /* Modem Status Register */ +#define BFIN_UART_SCR 0xFFC0041C /* SCR Scratch Register */ +#define BFIN_UART_GCTL 0xFFC00424 /* Global Control Register */ /* SPI Controller (0xFFC00500 - 0xFFC005FF) */ #define SPI0_REGBASE 0xFFC00500 |